1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2022/06/04 23:14:19 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing (1-based),
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+rca2|ANSI relative cursor-addressing,
355 hpa=\E[%i%p1%dG, vpa=\E[%i%p1%dd,
356 ansi+cup|ANSI absolute cursor-addressing,
357 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
358 ansi+rep|ANSI repeat-character,
359 rep=%p1%c\E[%p2%{1}%-%db,
360 ansi+idl1|ANSI insert/delete one line,
362 ansi+idl|ANSI insert/delete lines,
363 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
364 ansi+idc1|ANSI insert/delete one character,
365 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
366 ansi+idc|ANSI insert/delete characters,
367 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
368 ansi+arrows|ANSI normal-mode home and cursor-keys,
369 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
371 ansi+sgr|ANSI graphic renditions,
372 blink=\E[5m, invis=\E[8m, rev=\E[7m,
373 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
375 ansi+sgrso|ANSI standout only,
376 rmso=\E[m, smso=\E[7m,
377 ansi+sgrul|ANSI underline only,
378 rmul=\E[m, smul=\E[4m,
379 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
381 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
383 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
384 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
386 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
388 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
390 # ECMA-48 does not specify scroll-regions, but most people consider it to be
391 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
392 ansi+csr|ANSI scroll-region plus cursor save & restore,
393 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
395 # The normal (ANSI) flavor of "media copy" building block asserts that
396 # characters sent to the printer do not echo on the screen. DEC terminals
397 # can also be put into autoprinter mode, where each line is sent to the
398 # printer as you move off that line, e.g., by a carriage return.
399 ansi+pp|ANSI printer port,
401 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
402 dec+pp|DEC autoprinter mode,
403 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
405 # The IBM PC alternate character set. Plug this into any Intel console entry.
406 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
407 # ROM graphics for control characters such as the diamond, up- and down-arrow.
408 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
409 # will work with any Intel console, they all seem to have inherited \E[11m
410 # from the ANSI.SYS de-facto standard.
411 klone+acs|alternate character set for ansi.sys displays,
412 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
413 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
414 \301w\302x\263y\363z\362{\343|\330}\234~\376,
415 rmacs=\E[10m, smacs=\E[11m,
417 # Highlight controls corresponding to the ANSI.SYS standard. Most
418 # console drivers for Intel boxes obey these. Makes the same assumption
419 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
420 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
421 klone+sgr|attribute control for ansi.sys displays,
422 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
423 rmso=\E[m, rmul=\E[m,
424 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
426 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
429 # Most Intel boxes do not treat "invis" (invisible) text.
430 klone+sgr8|attribute control for ansi.sys displays with invis,
432 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
433 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
436 # Highlight controls corresponding to the ANSI.SYS standard. *All*
437 # console drivers for Intel boxes obey these. Does not assume \E[11m will
438 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
439 # diamond and arrow characters under curses.
440 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
441 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
443 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
444 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
445 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
448 # KOI8-R (RFC1489) acs (alternate character set)
449 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
450 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
451 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
452 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
453 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
455 rmacs=\E[10m, smacs=\E[11m,
457 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
458 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
459 # but equivalent strings that don't rely on that coincidence:
460 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
461 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
462 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
463 # They match a subset of ECMA-48.
464 klone+color|color control for ansi.sys and ISO6429-compatible displays,
465 colors#8, ncv#3, pairs#64,
466 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
468 # This is better than klone+color, it doesn't assume white-on-black as the
469 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
470 ecma+color|color control for ECMA-48-compatible terminals,
472 colors#8, ncv#3, pairs#64,
473 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
475 ecma+italics|ECMA-48 italics,
476 ritm=\E[23m, sitm=\E[3m,
478 # Attribute control for ECMA-48-compatible terminals
479 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
480 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
482 ecma+strikeout|ECMA-48 strikeout/crossed-out,
483 rmxx=\E[29m, smxx=\E[9m,
485 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
487 ecma+index|ECMA-48 scroll up/down,
488 indn=\E[%p1%dS, rin=\E[%p1%dT,
490 # For comparison, here are all the capabilities implied by the Intel
491 # Binary Compatibility Standard (level 2) that fit within terminfo.
492 # For more detail on this rather pathetic standard, see the comments
493 # near the end of this file.
494 ibcs2|Intel Binary Compatibility Standard prescriptions,
495 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
496 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
497 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
498 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
499 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
500 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
501 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
503 #### ANSI/ECMA-48 terminals and terminal emulators
505 # See near the end of this file for details on ANSI conformance.
506 # Don't mess with these entries! Lots of other entries depend on them!
508 # This section lists entries in a least-capable to most-capable order.
509 # if you're in doubt about what `ANSI' matches yours, try them in that
510 # order and back off from the first that breaks.
512 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
513 # and more than one page of memory. It uses local motions instead of
514 # direct cursor addressing, and makes almost no assumptions. It does
515 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
516 ansi-mr|mem rel cup ANSI,
518 cols#80, lines#24, use=vanilla, use=ansi+erase,
521 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
522 # beware of screen size problems and memory relative cursor addressing.
523 ansi-mini|any ANSI terminal with pessimistic assumptions,
525 cols#80, lines#24, use=vanilla, use=ansi+cup,
528 # ansi-mtabs adds relative addressing and minimal tab support
529 ansi-mtabs|any ANSI terminal with pessimistic assumptions (relative addressing),
531 ht=^I, use=ansi-mini, use=ansi+local1,
533 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
535 # The following is an entry for the full ANSI 3.64 (1977). It lacks
536 # padding, but most terminals using the standard are "fast" enough
537 # not to require any -- even at 9600 bps. If you encounter problems,
538 # try including the padding specifications.
540 # Note: the :as: and :ae: specifications are not implemented here, for
541 # the available termcap documentation does not make clear WHICH alternate
542 # character set to specify. ANSI 3.64 seems to make allowances for several.
543 # Please make the appropriate adjustments to fit your needs -- that is
544 # if you will be using alternate character sets.
546 # There are very few terminals running the full ANSI 3.64 standard,
547 # so I could only test this entry on one verified terminal (Visual 102).
548 # I would appreciate the results on other terminals sent to me.
550 # Please report comments, changes, and problems to:
552 # U.S. MAIL: Hugh Hansard
555 # Atlanta, GA. 30322.
557 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
559 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
560 ansi77|ANSI 3.64 standard 1977 version,
562 cols#80, it#8, lines#24,
563 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
564 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
565 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
566 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
567 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
568 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
569 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
570 smso=\E[7m, smul=\E[4m,
572 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
573 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
574 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
575 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
576 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
577 # to confuse many emulators. On the other hand, we can count on these programs
578 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
579 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
580 # ANSI.SYS influence.
581 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
582 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ANSI (mono mode),
584 cols#80, it#8, lines#24,
585 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
586 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
587 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
588 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
589 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
591 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
592 lines#25, use=pcansi-m,
593 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
594 lines#33, use=pcansi-m,
595 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
596 lines#43, use=pcansi-m,
597 # The color versions. All PC emulators do color...
598 pcansi|ibm-pc terminal programs claiming to be ANSI,
599 use=klone+color, use=pcansi-m,
600 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
601 lines#25, use=pcansi,
602 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
603 lines#33, use=pcansi,
604 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
605 lines#43, use=pcansi,
607 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
608 # If you want pound signs rather than dollars, replace `B' with `A'
609 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
610 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
611 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
613 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
614 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
615 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
616 ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
617 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
618 mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
619 s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
620 vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
622 ansi+enq|ncurses extension for ANSI ENQ,
623 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
626 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
627 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
628 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
629 ansi|ansi/pc-term compatible with color,
630 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
632 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
633 # all the normal ANSI stuff with no extensions. It assumes
634 # insert/delete line/char is there, so it won't work with
635 # VT100 clones. It assumes video attributes for bold, blink,
636 # underline, and reverse, which won't matter much if the terminal
637 # can't do some of those. Padding is assumed to be zero, which
638 # shouldn't hurt since xon/xoff is assumed.
639 ansi-generic|ansiterm|generic ANSI standard terminal,
641 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
642 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
643 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
644 use=ansi+sgrbold, use=ansi+arrows,
646 #### DOS ANSI.SYS variants
648 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
649 # documentation (except for the keyboard key reassignment feature, which
650 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
651 # though undocumented. The <pfkey> capability is untested but should work for
652 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
653 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
655 # DOS 2.0 (January 1983) documented these features in
656 # Chapter 13, "Using Extended Screen and Keyboard Control" -TD
657 ansi.sys-old|ANSI.SYS under PC-DOS 2.0,
658 OTbs, am, mir, msgr, xon,
660 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
661 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
662 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
663 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
664 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
665 u7=\E[6n, use=klone+color, use=klone+sgr8,
667 # Keypad: Home=\0G Up=\0H PrPag=\0I
668 # ka1,kh kcuu1 kpp,ka3
670 # Left=\0K 5=\0L Right=\0M
673 # End=\0O Down=\0P NxPag=\0Q
674 # kc1,kend kcud1 kc3,knp
679 # On keyboard with 12 function keys,
680 # shifted f-keys: F13-F24
681 # control f-keys: F25-F36
682 # alt f-keys: F37-F48
683 # The shift/control/alt keys do not modify each other, but alt overrides both,
684 # and control overrides shift.
686 # <pfkey> capability for F1-F48 -TD
687 ansi.sys|ANSI.SYS 3.1 and later versions,
688 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
689 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
690 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
691 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
692 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
693 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
694 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
695 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
696 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
697 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
698 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
699 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
700 pfkey=\E[0;%?%p1%{11}%<%t%':'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
701 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
702 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
706 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
707 # This should only be used when the terminal emulator cannot redefine the keys.
708 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
709 # definitions must be restored. If the terminal emulator is quit while in vi
710 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
711 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
712 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
713 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
714 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
715 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
716 # Consequently the End keypad key could not be set (it is relatively safe and
717 # actually useful because it sends ^@ O, which beeps and opens a line above).
718 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
719 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
720 \svi\s9-29-86\n\E[;75;8p,
721 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
722 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
723 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
724 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
727 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
728 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
729 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
730 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
733 # See ansi.sysk and nansi.sys above.
734 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
735 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
736 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
737 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
740 #### Atari ST terminals
742 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
744 tw52|tw52-color|Toswin window manager with color,
746 colors#16, pairs#0x100,
747 oc=\Eb?\Ec0, op=\Eb?\Ec0,
748 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
750 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
752 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
754 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
757 tw52-m|Toswin window manager monochrome,
760 bold=\Eya, dch1=\Ea, dim=\EyB,
761 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
762 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
763 smso=\EyQ, smul=\EyH, use=at-m,
764 tt52|Atari TT medium and high resolution,
765 lines#30, use=at-color,
766 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
768 colors#16, pairs#0x100,
769 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
770 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
773 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
775 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
776 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
777 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
778 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
780 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
781 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
782 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
783 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
785 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
786 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
787 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
788 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
791 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
793 cols#80, it#8, lines#24,
794 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
795 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
796 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
797 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
798 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
799 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
800 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
801 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
802 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
803 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
804 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
805 tw100|Toswin VT100 window manager,
807 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
808 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
810 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
811 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
812 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
813 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
814 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
815 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
816 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
817 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
818 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
819 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
820 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
821 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
822 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
823 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
824 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
825 rmso=\E[m, rmul=\E[m,
826 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
828 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
829 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
831 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
832 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
834 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
835 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
836 # The entries for stv52 and stv52pc probably need a revision.
837 stv52|MiNT virtual console,
839 cols#80, it#8, lines#30,
840 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
841 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
842 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
843 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
844 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
845 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
846 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
847 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
848 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
849 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
850 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
851 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
852 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
853 stv52pc|MiNT virtual console with PC charset,
855 cols#80, it#8, lines#30,
856 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
857 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
858 \363z\362{\343|\366}\234~\371,
859 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
860 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
861 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
862 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
863 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
864 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
865 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
866 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
867 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
868 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
869 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
870 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
873 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
876 cols#80, it#8, lines#25,
877 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
878 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
879 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
880 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
881 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
882 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
883 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
885 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base,
886 # MiNT VT52 emulation. 80 columns, 25 rows.
887 # MiNT is Now TOS, the operating system which comes with all Ataris now
888 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
889 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
890 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
891 st52-old|Atari ST with VT52 emulation,
894 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
895 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
896 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
897 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
898 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
899 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
900 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
901 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
902 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
907 # BeOS entry for Terminal program Seems to be almost ANSI
908 beterm|BeOS Terminal,
909 am, eo, mir, msgr, xenl, xon,
910 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
911 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
912 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
913 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
914 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
915 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
916 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
917 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
918 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
919 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
920 kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~,
921 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~,
922 kf8=\E[18~, kf9=\E[19~, kspd=^Z, nel=\r\n, op=\E[m, rc=\E8,
923 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m,
924 rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm,
925 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm,
926 setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h,
927 smkx=\E[?4h, smso=\E[7m, smul=\E[4m,
928 u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd,
934 # This entry is good for the 1.2.13 or later version of the Linux console.
936 # ***************************************************************************
939 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
940 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
941 # * character. Here are the keymap replacement lines that will set this up: *
943 # keycode 15 = Tab Tab
944 # alt keycode 15 = Meta_Tab
945 # shift keycode 15 = F26
946 # string F26 ="\033[Z"
948 # * This has to use a key slot which is unfortunate (any unused one will *
949 # * do, F26 is the higher-numbered one). The change ought to be built *
950 # * into the kernel tables. *
952 # ***************************************************************************
954 # All linux kernels since 1.2.13 (at least) set the screen size
955 # themselves; this entry assumes that capability.
957 linux-basic|Linux console (basic),
958 am, bce, eo, mir, msgr, xenl, xon,
960 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
961 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
962 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
963 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
964 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
965 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
966 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
967 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
968 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
969 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
970 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
971 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
972 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B,
973 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
974 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
975 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
976 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
977 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
978 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
979 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
980 vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
981 use=klone+sgr, use=ecma+color, use=linux+sfkeys,
983 linux+decid|ncurses extension for Linux console DECID,
984 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
986 linux+sfkeys|shifted function-keys for Linux console,
987 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
988 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
990 linux-m|Linux console no color,
992 setab@, setaf@, setb@, setf@, use=linux,
994 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
995 # and it matters, turn off <ccc>. The %02x escape used to implement this is
996 # not supposedly back-portable to older SV curses (although it has worked fine
997 # on Solaris for several years) and not supported in ncurses versions before
999 linux-c-nc|Linux console with color-change,
1001 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1002 %02x%p4%{255}%*%{1000}%/%02x,
1003 oc=\E]R, use=linux-basic,
1004 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1005 linux-c|Linux console 1.3.6+ for older ncurses,
1007 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1008 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1009 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1010 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1011 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1012 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1013 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1014 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1016 oc=\E]R, use=linux-basic,
1018 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1019 # get a block cursor for cvvis.
1020 # reported by Frank Heckenbach <frank@g-n-u.de>.
1021 linux2.2|Linux 2.2.x console,
1022 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1023 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1025 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1026 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1027 # Although the kernel has mappings for these, they were not in the default
1028 # font (tested with Debian and Fedora):
1035 # The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature
1036 # misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only
1037 # omits the line-drawing using SI/SO, but also part/all of the Unicode feature:
1039 # https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html
1040 # "This enables support for font mapping and Unicode translation on virtual consoles."
1042 # This mailing list thread in July 2008 illustrates:
1044 # https://marc.info/?t=121734656700005&r=1&w=4
1045 # "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1"
1047 # The change which made it configurable was to reduce the size for use in
1048 # embedded systems. Some background is found in
1050 # https://lwn.net/Articles/284767/
1051 # "An interview with the new embedded maintainers"
1052 linux2.6|Linux 2.6.x console,
1053 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1055 enacs=\E)0, rmacs=^O,
1056 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1057 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1058 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1060 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1061 # It is the same as xterm's erase-saved-lines feature.
1063 # Linux 3.0 was released in July 2011. The keyboard utilities (kbd) are
1064 # used for configuring its keyboard mappings.
1066 # kbd 1.14 was released before that (January 2008), but due to its placement
1067 # late in the Linux 2.6.x series had no immediate effect for most users. That
1068 # provided a default mapping for shift-tab to the (misnamed) Meta_Tab, i.e.,
1069 # the same as Alt-Tab.
1071 # The suggested mapping for the conventional \E[Z is provided in this entry as
1072 # an extended key to lessen user surprise -TD
1073 linux3.0|Linux 3.0 kernels,
1074 kcbt=\E^I, E3=\E[3J, kcbt2=\E[Z, use=linux2.6,
1076 # This is Linux console for ncurses.
1077 linux|Linux console,
1080 # Subject: linux 2.6.26 vt back_color_erase
1081 # Changes to the Linux console driver broke bce model as reported in
1082 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1084 # http://lkml.org/lkml/2008/4/26/305
1085 # http://lkml.org/lkml/2008/10/3/66
1086 linux2.6.26|Linux console w/o bce,
1089 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1090 linux-nic|Linux with ich/ich1 suppressed for non-curses programs,
1091 ich@, ich1@, use=linux,
1093 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1094 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1095 linux-koi8|Linux with koi8 alternate character set,
1096 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1097 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1098 \211w\210x\201y\230z\231{\267|\274~\224,
1099 use=linux, use=klone+koi8acs,
1101 # Another entry for KOI8-r with Qing Long's acsc.
1102 # (which one better complies with the standard?)
1103 linux-koi8r|Linux with koi8-r alternate character set,
1104 use=linux, use=klone+koi8acs,
1106 # Entry for the latin1 and latin2 fonts
1107 linux-lat|Linux with latin1 or latin2 alternate character set,
1108 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1109 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1110 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1113 # This uses graphics from VT codeset instead of from cp437.
1114 # reason: cp437 (aka "straight to font") is not functional under luit.
1115 # from: Andrey V Lukyanov <land@long.yar.ru>.
1116 linux-vt|Linux console using VT codes for graphics,
1117 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1119 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1122 # This is based on the Linux console (relies on the console to perform some
1123 # of the functionality), but does not recognize as many control sequences.
1124 # The program comes bundled with an old (circa 1998) copy of the Linux
1125 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1126 # \E* move cursor to home, as as \E[H
1128 # \EE move cursor to beginning of row
1129 # \E[y,xf same as \E[y,xH
1131 # Note: The status-line support is buggy (dsl does not work).
1132 kon|kon2|jfbterm|Kanji ON Linux console,
1134 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1135 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1139 # Another variant. There are two parts (src, src/lib) with the latter
1140 # comprising the escape-sequence parsing. The copyright notice on that
1141 # says it is based on GTerm by Timothy Miller.
1143 # The original developer "dragchan" has left, but as of March 2017 there is
1144 # (still dead) code from May 2015 here:
1145 # https://github.com/izmntuk/fbterm
1147 # The acsc string may be incorrect.
1149 # Not used here, the program recognizes escapes for italic, underline and
1150 # dim, rendering those as green, cyan and gray respectively.
1151 fbterm|FbTerm for Linux with framebuffer,
1152 colors#0x100, pairs#0x10000,
1153 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1154 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1155 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1156 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1157 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1158 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1159 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1160 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1162 # 16-color linux console entry; this works with a 256-character
1163 # console font but bright background colors turn into dim ones when
1164 # you use a 512-character console font. This uses bold for bright
1165 # foreground colors and blink for bright background colors.
1167 # Interestingly, the original version of this entry in 2009 used a documented
1168 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1169 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1170 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1171 # suggested a different use for that particular code:
1173 # https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
1175 # Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
1177 # https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
1179 # For background, refer to the report on bug-ncurses:
1181 # https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
1182 linux-16color|Linux console with 16 colors,
1183 colors#16, ncv#42, pairs#0x100,
1184 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1185 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1188 # bterm (bogl 0.1.18)
1189 # Implementation is in bogl-term.c
1190 # Key capabilities from linux terminfo entry
1193 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1194 # bterm does not support sgr, since it only processes one parameter -TD
1195 bterm|bogl virtual terminal,
1197 colors#8, cols#80, lines#24, pairs#64,
1198 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J,
1199 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
1200 el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1201 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
1202 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1203 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1204 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1205 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1206 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
1207 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1208 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1209 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1210 use=vt220+pcedit, use=vt220+cvis,
1215 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1218 cols#80, it#8, lines#25,
1219 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1220 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1221 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1222 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1223 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1224 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1225 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1226 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1227 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1228 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1229 smso=\E[7m, smul=\E[4m,
1230 mach-bold|Mach console with bold instead of underline,
1231 rmul=\E[0m, smul=\E[1m, use=mach,
1232 mach-color|Mach console with ANSI color,
1234 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1235 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1237 # From: Samuel Thibault
1238 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1239 # Files: i386/i386at/kd.c
1241 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1243 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1244 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1245 \263y\363z\362{\343|\330}\234~\376,
1246 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1247 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1248 invis=\E[8m, nel=\EE,
1249 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1250 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1251 use=ecma+index, use=mach,
1253 mach-gnu-color|GNU Mach console with ANSI color,
1255 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1256 setaf=\E[3%p1%dm, use=mach-gnu,
1258 # From: Marcus Brinkmann
1259 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
1261 # Comments in the original are summarized here:
1263 # hurd uses 8-bit characters (km).
1265 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1267 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1268 # have the eat_newline_glitch. It doesn't support setting or removing tab
1271 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1272 # one byte instead three.
1274 # <ich1> is not included because hurd has insert mode.
1276 # hurd doesn't use ^J for scrolling, because this could put things into the
1277 # scrollback buffer.
1279 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1280 # This is a GNU extension.
1282 # The original has commented-out ncv, but is restored here.
1284 # Reading the source, RIS resets cnorm, but not xmous.
1285 hurd|The GNU Hurd console server,
1286 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1287 colors#8, it#8, ncv#18, pairs#64,
1288 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1290 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\Ec, cr=\r,
1291 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1292 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1293 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1294 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1295 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1296 el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I,
1297 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1298 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1299 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
1300 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1301 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1302 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1303 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1304 kich1=\E[2~, kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[39;49m,
1305 rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m, rmir=\E[4l,
1306 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1307 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1308 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1309 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1310 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1311 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1312 use=vt220+pcedit, use=ecma+index, use=ecma+italics,
1319 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1320 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1321 # right corner without triggering a scroll. The ncurses terminfo library can
1322 # handle this case with the <ich1> capability, and prefers <am> for better
1323 # optimization. Bug: The <op> capability resets attributes.
1324 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1325 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1326 qnx|qnx4|QNX console,
1327 daisy, km, mir, msgr, xhpa, xt,
1328 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1329 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1330 \303u\264v\301w\302x\263,
1331 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1332 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1333 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1334 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1335 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1336 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1337 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1338 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1339 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1340 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1341 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1342 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1343 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1344 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1345 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1346 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1347 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1348 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1349 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1350 kext=\377\270, kf1=\377\201, kf10=\377\212,
1351 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1352 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1353 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1354 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1355 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1356 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1357 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1358 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1359 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1360 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1361 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1362 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1363 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1364 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1365 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1366 khlp=\377\350, khome=\377\240, khts=\377\342,
1367 kich1=\377\253, kil1=\377\273, kind=\377\261,
1368 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1369 knp=\377\252, knxt=\377\312, kopn=\377\357,
1370 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1371 kprv=\377\302, krdo=\377\336, kref=\377\354,
1372 kres=\377\360, krfr=\377\347, kri=\377\271,
1373 krmir=\377\313, krpl=\377\362, krst=\377\352,
1374 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1375 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1376 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1377 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1378 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1382 qnxt|qnxt4|QNX4 terminal,
1385 qnxm|QNX4 with mouse events,
1387 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1388 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1389 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1390 smicm=\E/>2h, use=qnx4,
1395 # Monochrome QNX4 terminal or console. Setting this terminal type will
1396 # allow an application running on a color console to behave as if it
1397 # were a monochrome terminal. Output will be through stdout instead of
1398 # console writes because the term routines will recognize that the
1399 # terminal name starts with 'qnxt'.
1401 qnxtmono|Monochrome QNX4 terminal or console,
1405 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1406 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1407 # (TD: derive from original qnx4 entry)
1408 qnxt2|QNX 2.15 serial terminal,
1410 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1411 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1413 # QNX ANSI terminal definition
1416 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1417 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1418 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
1419 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1420 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1421 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1422 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1423 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1424 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1425 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1426 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1427 ind=\E[S, invis=\E[9m,
1428 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1429 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1430 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1431 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1432 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1433 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1434 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1435 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1436 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1437 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1438 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1439 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1440 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1441 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1442 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1443 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1444 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1445 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1446 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1447 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1448 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1449 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1450 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1451 rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1452 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1453 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1454 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1456 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1458 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1459 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1460 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1461 smul=\E[4m, tbc=\E[3g,
1462 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
1463 use=att610+cvis0, use=ecma+index,
1465 qansi|QNX ANSI with console writes,
1466 daisy, xhpa, use=qansi-g,
1468 qansi-t|QNX ANSI without console writes,
1471 qansi-m|QNX ANSI with mouse,
1473 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1474 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1475 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1476 smicm=\E[>2h, use=qansi,
1478 qansi-w|QNX ANSI for windows,
1483 # SCO console and SOS-Syscons console for 386bsd
1484 # (scoansi: had unknown capabilities
1485 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1486 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1487 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1488 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1489 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1490 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1491 # on the <smacs>=\E[12m -- esr)
1493 # klone+sgr-dumb is an error since the acsc does not match -TD
1495 # In this description based on SCO's keyboard(HW) manpage list of default
1496 # function key values:
1497 # F13-F24 are shifted F1-F12
1498 # F25-F36 are control F1-F12
1499 # F37-F48 are shift+control F1-F12
1501 # hpa/vpa work in the console, but not in scoterm:
1505 # SCO's terminfo uses
1508 # which do not work (console or scoterm).
1510 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1511 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1512 OTbs, am, bce, eo, xon,
1513 colors#8, cols#80, it#8, lines#25, pairs#64,
1514 acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN
1515 OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3
1517 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1518 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1519 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1520 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1521 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1522 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1523 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1524 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1525 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
1526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
1527 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
1528 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1529 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1530 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1531 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1532 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1533 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1534 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1535 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1536 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1537 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1538 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1539 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1540 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1541 smul=\E[4m, use=ecma+index,
1542 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1544 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1545 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1546 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1547 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1548 %p7%t;8%;%?%p9%t;12%e;10%;m,
1549 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1550 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1551 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1552 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1553 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1555 # make this easy to change...
1556 scoansi|SCO Extended ANSI standard crt,
1561 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1562 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1563 # for the application keypad mode. We have added iris-ansi-ap rather than
1564 # change the original to keypad mode.
1566 # (iris-ansi: added rmam/smam based on init string -- esr)
1568 # This entry, and those derived from it, is used in xwsh (also known as
1569 # winterm). Some capabilities that do not fit into the terminfo model
1570 # include the shift- and control-functionkeys:
1572 # F1-F12 generate different codes when shift or control modifiers are used.
1576 # control-F1 \E[025q
1578 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1579 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1581 # The cursor keys also have different codes:
1582 # control-up \E[162q
1583 # control-down \E[165q
1584 # control-left \E[159q
1585 # control-right \E[168q
1588 # shift-down \E[164q
1589 # shift-left \E[158q
1590 # shift-right \E[167q
1592 # control-tab \[072q
1594 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1596 cols#80, it#8, lines#40,
1597 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1598 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1599 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1600 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1601 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1602 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1603 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1604 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1605 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1606 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1607 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1608 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1609 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1610 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1611 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1612 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1613 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1614 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1615 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1617 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1618 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1619 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1621 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1622 # (T.Dickey 98/1/24)
1623 iris-color|xwsh|IRIX ANSI with color,
1625 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1626 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1627 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1628 use=ecma+italics, use=vt100+enq, use=klone+color,
1631 #### OpenBSD consoles
1633 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1635 # The following terminal descriptions for the AMD/Intel PC console
1636 # were prepared based on information contained in the OpenBSD-4.9
1637 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1639 # Added bce based on testing with tack -TD
1640 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1641 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1643 # Notes from testing with vttest:
1644 # fails wrapping test
1646 # identifies as vt200 with selective erase, but does not implement DECSCA
1649 # ESC # 8 DEC Screen Alignment Test (DECALN).
1650 # CSI ? 5 h Reverse Video (DECSCNM).
1652 pccon+keys|OpenBSD PC keyboard keys,
1653 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1654 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1655 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1656 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1657 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1658 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1659 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1660 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1662 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1663 acsc=+>\,<-\^.v0#`+a:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#
1665 bold=\E[1m, rev=\E[7m, rmso=\E[27m,
1666 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1667 sgr0=\E[m, smso=\E[7m,
1668 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1669 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1670 bold=\E[1m, enacs=\E)0, rev=\E[7m, rmacs=\E(B, rmso=\E[27m,
1671 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1673 sgr0=\E[m\E(B, smacs=\E(0, smso=\E[7m,
1674 # underline renders as color
1675 pccon+colors|ANSI colors for OpenBSD PC console,
1677 colors#8, ncv#2, pairs#64,
1678 op=\E[49;39m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1679 # OpenBSD uses wscons,
1680 # + which does not implement DECSCNM or anything comparable, so it does not
1682 # + it renders underline using color.
1683 pccon+base|base capabilities for OpenBSD PC console,
1684 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1685 cols#80, it#8, lines#24,
1686 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1687 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1688 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1689 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1690 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1691 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1692 il=\E[%p1%dL, il1=\E[L, ind=\ED, nel=\EE, rc=\E8, ri=\EM,
1693 rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, sc=\E7, smam=\E[?7h,
1694 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1695 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1696 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1697 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1698 use=pccon0-m, use=pccon+colors,
1699 pccon-m|OpenBSD PC console without colors,
1700 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1701 use=ansi+enq, use=vt220+cvis,
1702 pccon|OpenBSD PC console,
1703 use=pccon-m, use=pccon+colors,
1705 #### NetBSD consoles
1707 # pcvt termcap database entries (corresponding to release 3.31)
1708 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1710 # (For the terminfo master file, I translated these into terminfo syntax.
1711 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1712 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1713 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1715 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1716 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1717 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1718 pcvtXX|pcvt VT200 emulator (DEC VT220),
1719 am, km, mir, msgr, xenl,
1721 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1723 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1724 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1725 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1726 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1727 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1728 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1729 il=\E[%p1%dL, il1=\E[L, ind=\ED,
1730 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1731 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1732 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1733 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1734 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1735 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1736 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1737 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1738 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1739 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1740 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1741 use=ecma+index, use=vt220+cvis,
1743 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1744 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1745 # 50 lines entries; 80 columns
1746 pcvt25|DEC VT220 emulation with 25 lines,
1748 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1749 pcvt28|DEC VT220 emulation with 28 lines,
1751 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1752 pcvt35|DEC VT220 emulation with 35 lines,
1754 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1755 pcvt40|DEC VT220 emulation with 40 lines,
1757 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1758 pcvt43|DEC VT220 emulation with 43 lines,
1760 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1761 pcvt50|DEC VT220 emulation with 50 lines,
1763 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1765 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1766 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1767 # 50 lines entries; 132 columns
1768 pcvt25w|DEC VT220 emulation with 25 lines and 132 cols,
1770 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1771 pcvt28w|DEC VT220 emulation with 28 lines and 132 cols,
1773 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1774 pcvt35w|DEC VT220 emulation with 35 lines and 132 cols,
1776 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1777 pcvt40w|DEC VT220 emulation with 40 lines and 132 cols,
1779 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1780 pcvt43w|DEC VT220 emulation with 43 lines and 132 cols,
1782 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1783 pcvt50w|DEC VT220 emulation with 50 lines and 132 cols,
1785 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1787 # OpenBSD implements a color variation
1788 pcvt25-color|DEC VT220 emulation with 25 lines and color,
1790 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1791 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1792 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1793 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1794 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1797 # Terminfo entries to enable the use of the ncurses library in colour on a
1798 # NetBSD-arm32 console (only tested on a RiscPC).
1799 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1800 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1801 # typo in invis - TD
1802 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1803 am, bce, msgr, xenl, xon,
1804 cols#80, it#8, lines#30,
1805 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1806 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1807 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1808 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1809 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1810 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1811 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1812 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1813 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1814 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1815 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1816 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1817 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1818 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1819 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1821 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1822 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1823 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1824 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1827 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1828 cols#132, lines#50, use=arm100,
1830 # NetBSD/x68k console VT200 emulator. This port runs on a 68K machine
1831 # manufactured by Sharp for the Japanese market.
1832 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1833 x68k|x68k-ite|NetBSD/x68k ITE,
1835 kclr=\E[9~, khlp=\E[28~, use=vt220-base,
1838 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1840 # (still unfinished, but good enough so far.)
1841 ofcons|DNARD OpenFirmware console,
1844 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1845 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1846 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1847 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1848 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1849 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1850 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1851 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1852 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1853 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1854 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1855 rmso=\2330m, rmul=\2330m,
1856 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1857 %;%?%p1%p3%|%t;7%;m,
1858 sgr0=\2330m, smso=\2337m, smul=\2334m,
1860 # NetBSD "wscons" emulator in VT220 mode.
1861 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1862 # The emulator renders underlined text in red. Colors are otherwise usable.
1864 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1865 # that "vt220" is inaccurate. There are a few VT220-features, but most of the
1866 # VT220 screens in vttest do not work with this emulator. For instance, it
1867 # identifies itself (primary DA response) as a VT220 with selective erase. But
1868 # the selective erase feature does not work. The secondary response is copied
1869 # from Kermit's emulation of VT220, does not correspond to actual VT220. At
1870 # the level of detail in a termcap, it is a passable emulator, since ECH does
1871 # work. Don't use it on a VMS system -TD
1872 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1874 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1875 is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
1876 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
1877 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
1878 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1879 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1881 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1884 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1886 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1887 # Initial testing set TERM=xterm, based on comments by developers, found too
1888 # many differences to continue in that path. However, test-results may be
1889 # useful to people curious about compatibility with xterm.
1891 # Testing with tack:
1893 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1894 # There is color-bleeding in the color-pairs screen.
1895 # Attributes do not work with color
1897 # Failed: kf1-kf4, kf13-kf48, khome, kend
1898 # (effectively xterm-r6 for function-keys)
1899 # None of the function or cursor key-modifiers are encoded.
1900 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1902 # Testing with vttest:
1903 # -------------------
1904 # Identifies as VT220 with selective erase
1905 # (however, selective erase refers to DECSCA, SPA)
1906 # Does not implement VT52
1907 # Uses spaces to simulate double-size characters
1908 # Does not support 8-bit controls
1909 # Does not support VT220 reports
1910 # Does not support send/receive mode
1911 # Supports ECH (like rxvt)
1912 # Does not support DECSCA
1913 # Does not support any of the ISO-6429 cursor-movement
1914 # Does not support any of the ISO-6429 miscellaneous tests
1915 # (SL/SR also leave unexpected char on screen too)
1916 # Background does not change in menu 11.6.9 (SGR 22-27)
1917 # None of the xterm special features tests work
1918 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1921 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1923 rcons|BSD rasterconsole,
1925 # Color version of above. Color currently only provided by NetBSD.
1926 rcons-color|BSD rasterconsole with ANSI color,
1929 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1931 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1932 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1933 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1934 # -- compare with cons25w
1935 mgterm|MGL/MGL2 MobileGear Graphic Library,
1936 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1937 colors#8, cols#80, it#8, lines#18, pairs#64,
1938 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1939 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1940 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1941 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1942 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1943 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1944 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1945 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1946 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1947 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1948 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1949 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1950 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
1951 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1952 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
1953 vpa=\E[%i%p1%dd, use=ecma+index,
1955 #### FreeBSD console entries
1957 # Originally from termcap:
1959 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1960 # Andrey Chernov maintains the FreeBSD termcap distributions.
1962 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1963 # or comment out the :cb: capability in the console entry.
1965 # Alexander Lukyanov reports:
1966 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1967 # Now el1 clears not only to the line beginning, but also a large chunk
1968 # of previous line. But there is another bug - ech does not work at all.
1970 # syscons, sc - the console driver
1973 # common entry without semigraphics
1974 # Bug: The <op> capability resets attributes.
1975 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1976 # instance el1 does if the cursor is moved to the right margin first. Removed
1977 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1979 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1980 # Note that this disables standout with color.
1982 # The emulator sends different strings based on shift- and control-keys,
1984 # F13-F24 are shifted F1-F12
1985 # F25-F36 are control F1-F12
1986 # F37-F48 are shift+control F1-F12
1987 cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode),
1988 am, bce, bw, eo, msgr, npc,
1989 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1990 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1991 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1992 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1993 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1994 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1995 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1996 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1997 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1998 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1999 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
2000 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
2001 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
2002 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
2003 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
2004 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
2005 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
2006 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
2007 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
2008 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
2009 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
2010 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
2011 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
2013 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2015 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
2016 cons25|ansis|ansi80x25|FreeBSD console (25-line ANSI mode),
2017 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2018 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2021 cons25-debian|FreeBSD console with debian backspace (25-line ANSI mode),
2022 kbs=^?, kdch1=\E[3~, use=cons25,
2023 cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ANSI mode),
2025 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2026 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2027 smul=\E[4m, use=cons25,
2028 cons30|ansi80x30|FreeBSD console (30-line ANSI mode),
2029 lines#30, use=cons25,
2030 cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ANSI mode),
2031 lines#30, use=cons25-m,
2032 cons43|ansi80x43|FreeBSD console (43-line ANSI mode),
2033 lines#43, use=cons25,
2034 cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ANSI mode),
2035 lines#43, use=cons25-m,
2036 cons50|ansil|ansi80x50|FreeBSD console (50-line ANSI mode),
2037 lines#50, use=cons25,
2038 cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ANSI mode),
2039 lines#50, use=cons25-m,
2040 cons60|ansi80x60|FreeBSD console (60-line ANSI mode),
2041 lines#60, use=cons25,
2042 cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ANSI mode),
2043 lines#60, use=cons25-m,
2044 cons25r|pc3r|ibmpc3r|cons25-koi8-r|FreeBSD console w/koi8-r cyrillic,
2045 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2046 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2049 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|FreeBSD console w/koi8-r cyrillic (mono),
2051 op@, rmul=\E[m, setab@, setaf@,
2052 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2053 %t;30;1%;%?%p6%t;1%;m,
2054 smul=\E[4m, use=cons25r,
2055 cons50r|cons50-koi8r|FreeBSD console w/koi8-r cyrillic (50 lines),
2056 lines#50, use=cons25r,
2057 cons50r-m|cons50-koi8r-m|FreeBSD console w/koi8-r cyrillic (50-line mono),
2058 lines#50, use=cons25r-m,
2059 cons60r|cons60-koi8r|FreeBSD console w/koi8-r cyrillic (60 lines),
2060 lines#60, use=cons25r,
2061 cons60r-m|cons60-koi8r-m|FreeBSD console w/koi8-r cyrillic (60-line mono),
2062 lines#60, use=cons25r-m,
2063 # ISO 8859-1 FreeBSD console
2064 cons25l1|cons25-iso8859|FreeBSD console w/iso 8859-1 chars,
2065 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2066 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2067 \226v\227w\230x\231y\232z\233~\237,
2069 cons25l1-m|cons25-iso-m|FreeBSD console w/iso 8859-1 chars (mono),
2071 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2072 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2073 smul=\E[4m, use=cons25l1,
2074 cons50l1|cons50-iso8859|FreeBSD console w/iso 8859-1 chars (50 lines),
2075 lines#50, use=cons25l1,
2076 cons50l1-m|cons50-iso-m|FreeBSD console w/iso 8859-1 chars (50-line mono),
2077 lines#50, use=cons25l1-m,
2078 cons60l1|cons60-iso|FreeBSD console w/iso 8859-1 chars (60 lines),
2079 lines#60, use=cons25l1,
2080 cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono),
2081 lines#60, use=cons25l1-m,
2083 # vt - virtual terminal console driver
2085 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2086 # which is intended to be xterm-compatible. See for example
2087 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2088 # in particular scterm-teken.c
2090 # Some of the documentation refers to this as "vt"; its proper name is "teken".
2092 # The sc(4) manual page states that it is possible to switch between the two
2093 # by editing /boot/loader.conf, adding
2095 # Doing that does not change the default TERM variable. That is hard-coded in
2096 # /etc/ttys, rather than deriving it from the kernel state.
2098 # For FreeBSD 12 and 13:
2099 # ---------------------
2100 # In newer releases, it is no longer possible to boot into a configuration that
2101 # works with syscons. According to efi(4),
2102 # "The vt(4) system console is automatically selected when booting via UEFI."
2103 # See FreeBSD #264226.
2105 # FreeBSD 13 supports 64-bit machines which boot with UEFI:
2106 # https://www.freebsd.org/platforms/
2107 # The i386 platform does not use UEFI (and modifying the loader configuration
2108 # does load sysconf); however because no updates (fixes) are available, most
2109 # developers will regard that as unsupported.
2111 # With FreeBSD 13, even when syscons is loaded (e.g., with the i386 platform),
2112 # its function-keys are not configured. Using
2113 # vidcontrol -T cons25
2116 # When teken is loaded, vidcontrol can switch at runtime between the
2117 # teken/cons25 function keys:
2118 # vidcontrol -T cons25
2119 # vidcontrol -T xterm
2120 # However due to a limitation in the implementation, only the first 12 function
2121 # keys are available. The real syscons supports 48 function keys (using the
2122 # shift and control modifiers), while xterm supports more than twice as many.
2124 # vidcontrol does not change the emulation. As a result, the quarter (17/73) of
2125 # non-function key capabilities which differ between syscons and teken are
2126 # unsupported in the UEFI-based configurations.
2129 # VT100 line-drawing does not work (UTF-8 equivalents do).
2130 # Shift/control modifiers have no effect on special keys.
2131 # Meta does not work.
2133 # supports REP (repeat).
2134 # still does not support left/right margins
2135 # SU/SD work, but not SL/SR
2136 # alternate screen does not work
2137 # ENQ/DA1 is unimplemented (the terminal does not identify itself)
2138 # CPR, XCPR are unimplemented (i.e., vttest and resize are broken)
2139 # implements X11 (original) xterm-mouse.
2141 # UTF-8 line-drawing works, including some double/thick lines
2143 # For FreeBSD 9 and 10:
2144 # --------------------
2145 # The /etc/ttys entries for console and other ttys are all configured to set
2148 # Testing with tack:
2149 # There is no VT100 line-drawing (uses +'s and -'s)
2150 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2152 # Testing with vttest:
2153 # Menu 2 diamonds don't work, blink ditto, light background ditto
2154 # The terminal identifies itself as VT100 with AVO
2155 # There is no VT52 support
2156 # There is no doublesize character support
2157 # The terminal supports ECH (like rxvt)
2158 # The terminal does not support send/receive mode
2159 # The terminal supports all of the ISO-6429 cursor-movement
2160 # The terminal supports some of the ISO-6429 miscellaneous tests
2161 # (SL/SR also leave unexpected char on screen too)
2163 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2164 # the cells which happen to have ASCII control-character values:
2165 # - ^X arrow pointing up
2166 # . ^Y arrow pointing down
2170 # Those are removed from this entry's acsc string to avoid confusion.
2171 # The resulting description provides correct line-drawing and function-keys -TD
2172 teken-2018|teken as of 2018,
2174 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2175 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2176 cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
2177 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[F, kent=\r,
2178 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
2179 kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2180 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
2181 kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
2182 vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
2184 teken-2022|teken as of 2022,
2185 am, bce, eo, mir, msgr, npc,
2186 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, U8#1,
2187 bold=\E[1m, cr=\r, cub1=^H, dim=\E[30;1m, ech=\E[%p1%dX,
2188 ind=\E[S, kbs=^H, kent=\r, nel=\E[E, op=\E[x, rev=\E[7m,
2189 ri=\E[T, rmso=\E[27m, rs2=\E[x\E[m\Ec, setab=\E[4%p1%dm,
2191 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2192 sgr0=\E[m, use=vt220+cvis, use=ecma+index,
2193 use=ansi+arrows, use=ansi+csr, use=ansi+cup,
2194 use=ansi+erase, use=ansi+idc, use=ansi+idl,
2195 use=ansi+local, use=ansi+rca2, use=ansi+sgrso,
2198 teken-vt+fkeys|teken's xterm special keys,
2199 kdch1=\E[3~, kend=\E[F, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
2200 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
2201 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2202 kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2204 teken-sc+fkeys|teken's syscons special keys,
2205 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2206 kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R,
2207 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2210 teken-sc|teken imitating syscons,
2211 use=teken-sc+fkeys, use=teken-2022,
2213 teken|teken-vt|teken imitating xterm,
2214 xenl, use=teken-vt+fkeys, use=xterm+x11mouse,
2217 teken-16color|teken using 16 colors,
2218 use=ibm+16color, use=teken,
2220 #### 386BSD and BSD/OS Consoles
2223 # This was the original 386BSD console entry (I think).
2224 # Some places it's named oldpc3|oldibmpc3.
2225 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2226 origpc3|origibmpc3|IBM PC 386BSD console,
2227 OTbs, am, bw, eo, xon,
2229 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2231 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2232 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2233 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2234 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2235 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2236 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2238 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2239 oldpc3|oldibmpc3|old IBM PC BSD/386 console,
2242 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2243 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2244 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2245 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2247 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2248 # Note, the emulator supports many of the additional console features
2249 # listed in the iBCS2 (e.g. character-set selection) though not all
2250 # are described here. This entry really ought to be upgraded.
2251 # Also note, the console will also work with fewer lines after doing
2252 # "stty rows NN", e.g. to use 24 lines.
2253 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2254 # Bug: The <op> capability resets attributes.
2255 bsdos-pc|IBM PC BSD/OS console,
2256 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2257 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2258 use=bsdos-pc-nobold,
2260 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2261 use=klone+color, use=bsdos-pc-m,
2263 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2264 OTbs, am, eo, km, xon,
2265 cols#80, it#8, lines#25,
2266 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2267 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2268 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2269 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2270 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2271 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2272 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2273 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2274 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2277 # Old names for BSD/OS PC console used in releases before 4.1.
2278 pc3|BSD/OS on the PC console,
2279 use=bsdos-pc-nobold,
2280 ibmpc3|pc3-bold|BSD/OS on the PC console with bold instead of underline,
2283 # BSD/OS on the SPARC
2284 bsdos-sparc|Sun SPARC BSD/OS console,
2287 # BSD/OS on the PowerPC
2288 bsdos-ppc|PowerPC BSD/OS console,
2293 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2295 # Actually (TD pointed this out at the time the acsc string was added):
2296 # VT52 shouldn't define full acsc since most of the cells don't match.
2297 # see VT100 manual page A-31. This is the list that does match:
2306 # The line-drawing happens to work in several terminal emulators, but should
2307 # not be used as a guide to the capabilities of the VT52. Note in particular
2308 # that VT52 does not support line-drawing characters (the scan-X values refer
2309 # to a crude plotting feature) -TD
2313 acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
2314 ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL],
2317 # This is more likely the "vt52" that you would see in emulation, i.e., no
2318 # keypad, no graphics.
2319 vt52-basic|VT52 for emulators,
2320 cols#80, it#8, lines#24,
2321 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
2322 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2323 home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2324 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI,
2326 #### DEC VT100 and compatibles
2328 # DEC terminals from the VT100 forward are collected here. Older DEC terminals
2329 # and micro consoles can be found in the `obsolete' section. More details on
2330 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2331 # found near the end of this file.
2333 # Except where noted, these entries are DEC's official terminfos.
2334 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2335 # Engineering for more information. Updated terminfos and termcaps
2336 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2338 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2339 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2340 # its name to Boundless Technologies; see http://www.boundless.com.
2343 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2344 # certainly includes what DEC called the `Level 1 editing extension' codes;
2345 # only the very oldest VT100s lacked these and there probably aren't any of
2346 # those left alive. To capture these, use one of the VT102 entries.
2348 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2349 # since the cursor is left in a different position while in the
2350 # weird state (concept at beginning of next line, vt100 at end
2351 # of this line) so all versions of vi before 3.7 don't handle
2352 # <xenl> right on vt100. The correct way to handle <xenl> is when
2353 # you output the char in column 80, immediately output CR LF
2354 # and then assume you are in column 1 of the next line. If <xenl>
2355 # is on, am should be on too.
2357 # I assume you have smooth scroll off or are at a slow enough baud
2358 # rate that it doesn't matter (1200? or less). Also this assumes
2359 # that you set auto-nl to "on", if you set it off use vt100-nam
2362 # The padding requirements listed here are guesses. It is strongly
2363 # recommended that xon/xoff be enabled, as this is assumed here.
2365 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2366 # tab settings are in non-volatile memory and don't need to be
2367 # reset upon login. Also setting the number of columns glitches
2368 # the screen annoyingly. You can type "reset" to get them set.
2370 # The VT100 series terminals have cursor ("arrows") keys which can operate
2371 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2372 # is the reset state, and is assumed to be the normal state. Application
2373 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2374 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2375 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2376 # was provided primarily as an aid to the porting of VT52 applications. It is
2377 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2378 # applications such as vi will always transmit the <smkx> string. Therefore,
2379 # the definitions for the cursor keys are made to match what the terminal
2380 # transmits after the <smkx> string is transmitted. If the <smkx> string
2381 # is a null string or is not defined, then cursor keys are assumed to be in
2382 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2383 # else the application may fail. It is also expected that applications will
2384 # always transmit the <rmkx> string to the terminal before they exit.
2386 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2387 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2388 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2389 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2390 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2391 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2392 # Enter key transmits the same as the Return key (Note: the Return key
2393 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2394 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2395 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2396 # is normally in Numeric Mode. If an application requires that the keypad be
2397 # in Application Mode then it is expected that the user, or the application,
2398 # will set the TERM environment variable to point to a terminfo entry which has
2399 # defined the <smkx> string to include the codes that switch the keypad into
2400 # Application Mode, and the terminfo entry will also define function key
2401 # fields to match the Application Mode control codes. If the <smkx> string
2402 # is a null string or is not defined, then the keypad is assumed to be in
2403 # Numeric Mode. If the <smkx> string switches the keypad into Application
2404 # Mode, it is expected that the <rmkx> string will contain the control codes
2405 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2406 # applications which transmit the <smkx> string will also always transmit the
2407 # <rmkx> string to the terminal before they exit.
2409 # Here's a diagram of the VT100 keypad keys with their bindings.
2410 # The top line is the name of the key (some DEC keyboards have the keys
2411 # labelled somewhat differently, like GOLD instead of PF1, but this is
2412 # the most "official" name). The second line is the escape sequence it
2413 # generates in Application Keypad mode (where "$" means the ESC
2414 # character). The third line contains two items, first the mapping of
2415 # the key in terminfo, and then in termcap.
2416 # _______________________________________
2417 # | PF1 | PF2 | PF3 | PF4 |
2418 # | $OP | $OQ | $OR | $OS |
2419 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2421 # | $Ow | $Ox | $Oy | $Om |
2422 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2424 # | $Ot | $Ou | $Ov | $Ol |
2425 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2427 # | $Oq | $Or | $Os | enter |
2428 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2431 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2433 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2434 # terminfo guidelines. That is a compromise used to assign the remaining
2435 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2437 vt100+keypad|DEC VT100 numeric keypad no fkeys,
2438 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2439 vt100+pfkeys|DEC VT100 numeric keypad (kf1-kf4),
2440 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2442 vt100+fnkeys|DEC VT100 numeric keypad (kf0-kf10),
2443 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2444 kf9=\EOw, use=vt100+pfkeys,
2446 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2447 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2448 # use the 5-key arrangement to model the arrow keys as suggested in the
2449 # terminfo guidelines:
2450 # _______________________________________
2451 # | PF1 | PF2 | PF3 | PF4 |
2452 # | $OP | $OQ | $OR | $OS |
2453 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2455 # | $Ow | $Ox | $Oy | $Om |
2456 # |_ka1__K1_|_________|_ka3__K3_|_________|
2458 # | $Ot | $Ou | $Ov | $Ol |
2459 # |_________|_kb2__K2_|_________|_________|
2461 # | $Oq | $Or | $Os | enter |
2462 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2465 # |___________________|_________|_kent_@8_|
2467 vt220+keypad|DEC VT220 numeric keypad,
2468 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2469 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2472 vt100+enq|ncurses extension for VT100-style ENQ,
2473 u8=\E[?1;2c, use=ansi+enq,
2474 vt102+enq|ncurses extension for VT102-style ENQ,
2475 u8=\E[?6c, use=ansi+enq,
2477 # And here, for those of you with orphaned VT100s lacking documentation, is
2478 # a description of the soft switches invoked when you do `Set Up'.
2480 # Scroll 0-Jump Shifted 3 0-#
2481 # | 1-Smooth | 1-British pound sign
2482 # | Autorepeat 0-Off | Wrap Around 0-Off
2484 # | | Screen 0-Dark Bkg | | New Line 0-Off
2485 # | | | 1-Light Bkg | | | 1-On
2486 # | | | Cursor 0-Underline | | | Interlace 0-Off
2487 # | | | | 1-Block | | | | 1-On
2489 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2491 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2492 # | | | 1-On | | | 1-50 Hz
2493 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2494 # | | 1-ANSI | | 1-8 Bits
2495 # | Keyclick 0-Off | Parity 0-Off
2497 # Margin Bell 0-Off Parity Sense 0-Odd
2500 # The following SET-UP modes are assumed for normal operation:
2501 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2502 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2503 # Other SET-UP modes may be set for operator convenience or communication
2504 # requirements; I recommend
2505 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2506 # Unless you have a graphics add-on such as Digital Engineering's VT640
2507 # (and even then, whenever it can be arranged!) you should set
2510 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2511 vt100|vt100-am|DEC VT100 (w/advanced video),
2512 OTbs, mc5i, xenl, xon,
2514 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2515 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2516 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2517 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2519 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2520 %;m%?%p9%t\016%e\017%;$<2>,
2521 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2522 use=vt100+4bsd, use=vt100+fnkeys,
2523 vt100+4bsd|DEC VT100 from 4.0BSD,
2525 cols#80, it#8, lines#24,
2526 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2527 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2528 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2529 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2530 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2531 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2532 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2533 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2534 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2535 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2536 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2537 %;m%?%p9%t\016%e\017%;$<2>,
2538 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2539 smul=\E[4m$<2>, tbc=\E[3g,
2540 vt100nam|vt100-nam|VT100 no automargins,
2542 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2543 vt100-vb|DEC VT100 (w/advanced video) & no beep,
2544 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2546 # Ordinary VT100 in 132 column ("wide") mode.
2547 vt100-w|vt100-w-am|DEC VT100 132 cols (w/advanced video),
2549 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2550 vt100-w-nam|vt100-nam-w|DEC VT100 132 cols (w/advanced video no automargin),
2551 cols#132, lines#14, vt@,
2552 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2554 # VT100 with no advanced video.
2555 vt100-nav|VT100 without advanced video option,
2557 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2559 vt100-nav-w|vt100-w-nav|DEC VT100 132 cols 14 lines (no advanced video option),
2560 cols#132, lines#14, use=vt100-nav,
2562 # VT100 with one of the 24 lines used as a status line.
2563 # We put the status line on the top.
2564 vt100-s|vt100-s-top|vt100-top-s|VT100 for use with top sysline,
2567 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2568 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2569 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2570 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2572 # Status line at bottom.
2573 # Clearing the screen will clobber status line.
2574 vt100-s-bot|vt100-bot-s|VT100 for use with bottom sysline,
2577 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2578 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2580 # Most of the `vt100' emulators out there actually emulate a VT102
2581 # This entry (or vt102-nsgr) is probably the right thing to use for
2584 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2586 vt102-w|DEC VT102 in wide mode,
2588 rs3=\E[?3h, use=vt102,
2590 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2591 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2592 # string in the canonical vt100 entry above leaves the screen littered
2593 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2594 # after highlight turnoffs. This entry should fix that, and even leave
2595 # ACS support working, at the cost of making multiple-highlight changes
2596 # slightly more expensive.
2597 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2598 vt102-nsgr|VT102 no sgr (use if you see snowflakes after highlight changes),
2599 sgr@, sgr0=\E[m, use=vt102,
2601 # VT125 Graphics CRT. Clear screen also erases graphics
2602 # Some VT125's came configured with VT102 support.
2603 vt125|VT125 graphics terminal,
2605 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2607 # This isn't a DEC entry, it came from University of Wisconsin.
2608 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2611 cols#80, it#8, lines#24, vt#3,
2612 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2613 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2614 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2615 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2616 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2617 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2618 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2619 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2620 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2622 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2623 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2624 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2626 # vt132 - like vt100 but slower and has ins/del line and such.
2627 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2628 # manual and from the ANSI standard, this describes the actual
2629 # terminal. I've never actually used a vt132 myself, so this
2634 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2635 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2637 # This vt220 description maps F5--F9 to the second block of function keys
2638 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2639 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2640 # PF1--PF4 are used as F1--F4.
2643 vt220-old|vt200-old|DEC VT220 in VT100 emulation mode,
2644 OTbs, OTpt, am, mir, msgr, xenl, xon,
2645 cols#80, lines#24, vt#3,
2647 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2648 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2649 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2650 cub1=^H, cud1=\E[B, cuf1=\E[C,
2651 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2652 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2653 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2654 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2655 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
2656 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
2657 kf8=\E[20~, kf9=\E[21~, kich1=\E[2~, rc=\E8, rev=\E[7m$<2>,
2658 rf=/usr/share/tabset/vt100, ri=\EM$<14/>,
2659 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2660 rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2662 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2663 %p9%t\E(0%e\E(B%;$<2>,
2664 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2665 smso=\E[7m, smul=\E[4m, use=vt220+pcedit, use=vt220+cvis,
2667 # Here's a picture of the Sun/PC editing keypad:
2668 # +--------+--------+--------+
2669 # | Insert | Home | PageUp |
2670 # +--------+--------+--------+
2671 # | Delete | End | PageDn |
2672 # +--------+--------+--------+
2674 # VT220 emulators such as xterm, using PC-keyboards use a different layout than
2675 # the VT220 keyboard:
2684 vt220+pcedit|editing-keypad for VT220 using PC keyboard,
2685 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
2686 knp=\E[6~, kpp=\E[5~,
2687 vt220+vtedit|editing-keypad for VT220 using DEC keyboard,
2688 kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2691 # A much better description of the VT200/220; used to be vt220-8
2692 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2693 # designation to accommodate bug in pcvt -TD
2695 # Here's a picture of the VT220 editing keypad:
2696 # +--------+--------+--------+
2697 # | Find | Insert | Remove |
2698 # +--------+--------+--------+
2699 # | Select | Prev | Next |
2700 # +--------+--------+--------+
2702 # Still, this is a "base" entry. Software emulators commonly leave out the
2703 # DECTCEM feature -TD
2704 vt220-base|DEC VT220 as emulated,
2705 OTbs, am, mir, msgr, xenl, xon,
2706 cols#80, it#8, lines#24, vt#3,
2707 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2708 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2709 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2710 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2711 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2712 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2713 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2714 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2715 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2716 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2717 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2718 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2719 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2720 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2721 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2722 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
2723 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
2724 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l,
2725 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2726 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2727 %p9%t\E(0%e\E(B%;$<2>,
2728 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2729 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
2730 use=ansi+pp, use=ansi+enq,
2731 vt220|vt200|DEC VT220,
2732 use=vt220+cvis, use=vt220-base,
2733 vt220-w|vt200-w|DEC VT220 in wide mode,
2735 rs3=\E[?3h, use=vt220,
2736 vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode,
2737 OTbs, am, mc5i, mir, msgr, xenl, xon,
2738 cols#80, it#8, lines#24, vt#3,
2739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2740 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2741 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2742 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2743 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2744 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2745 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2746 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2747 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2748 il=\233%p1%dL, il1=\233L, ind=\ED,
2749 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2750 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2751 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2752 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2753 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2754 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2755 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2756 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2757 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2758 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2759 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2760 rmul=\23324m, rs1=\233?3l, sc=\E7,
2761 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2762 %?%p9%t\E(0%e\E(B%;$<2>,
2763 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2764 smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
2767 # This VT220 description regards F6--F10 as the second block of function keys
2768 # at the top of the keyboard. This mapping follows the description given
2769 # in the VT220 Programmer Reference Manual and agrees with the labeling
2770 # on some terminals that emulate the VT220. There is no support for an F5.
2771 # See vt220 for an alternate mapping.
2773 vt220d|DEC VT220 in VT100 mode with DEC function key labeling,
2774 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2775 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2776 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2777 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2779 vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins,
2781 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2783 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2784 # (not an official DEC entry!)
2785 # The problem with real VT220 terminals is they don't send escapes when in
2786 # in VT220 mode. This can be gotten around two ways. 1> don't send
2787 # escapes or 2> put the VT220 into VT100 mode and use all the nifty
2788 # features of VT100 advanced video which it then has.
2790 # This entry takes the view of putting a VT220 into VT100 mode so
2791 # you can use the escape key in emacs and everything else which needs it.
2793 # You probably don't want to use this on a VMS machine since VMS will think
2794 # it has a VT220 and will get fouled up coming out of emacs
2796 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2797 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2799 vt200-js|vt220-js|DEC VT200 series with jump scroll,
2802 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2803 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2804 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2805 ht=^I, il1=\E[L, ind=\ED,
2806 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2808 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2809 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2810 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2811 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2812 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2813 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2816 # This was DEC's VT320. Use the purpose-built one below instead
2817 #vt320|DEC VT320 in VT100 emulation mode,
2820 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2822 vt320nam|v320n|DEC VT320 in VT100 emul. mode with NO AUTO WRAP mode,
2824 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
2827 # These entries are not DEC's official ones, they were purpose-built for the
2828 # VT320. Here are the designer's notes:
2829 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2830 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2831 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2832 # Things that use <knxt> usually use tab anyways... and things that don't use
2833 # tab usually use <knxt> instead...
2834 # kprv is same as tab - Backtab is useless...
2835 # I left out <sgr> because of its RIDICULOUS complexity,
2836 # and the resulting fact that it causes the termcap translation of the entry
2837 # to SMASH the 1k-barrier...
2838 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2839 # (vt320: uncommented <fsl> --esr)
2840 vt320|vt300|DEC VT320 7 bit terminal,
2841 am, mir, msgr, xenl,
2842 cols#80, lines#24, wsl#80,
2843 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2844 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
2845 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2846 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2847 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2848 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2849 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2850 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2851 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2852 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2853 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2854 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2855 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2856 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2857 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2858 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2859 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2860 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2862 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2864 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2865 %p9%t\E(0%e\E(B%;$<2>,
2866 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2867 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2868 use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl,
2870 vt320-nam|vt300-nam|DEC VT320 7 bit terminal with no am to make SAS happy,
2872 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2873 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2874 # We have to init 132-col mode, not 80-col mode.
2875 vt320-w|vt300-w|DEC VT320 wide 7 bit terminal,
2877 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2878 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2879 vt320-w-nam|vt300-w-nam|DEC VT320 wide 7 bit terminal with no am,
2881 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2882 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2884 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2885 # which are pretty much a superset of the VT320. They have the
2886 # host writable status line, yet another different DRCS matrix size,
2887 # and such, but they add the DEC Technical character set, Multiple text
2888 # pages, selectable length pages, and the like. The difference between
2889 # the VT330 and VT340 is that the former has only 2 planes and a monochrome
2890 # monitor, the latter has 4 planes and a color monitor. These terminals
2891 # support VT131 and ANSI block mode, but as with much of these things,
2892 # termcap/terminfo doesn't deal with these features.
2894 # Note that this entry is are set up in what was the standard way for GNU
2895 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2896 # keys were switched into application mode at the same time the numeric pad
2897 # is switched into application mode. This changes the definitions of the
2898 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2899 # your termcap or terminfo entry,
2901 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2902 # (vt340: string capability "sb=\E[M" corrected to "sr";
2903 # also, added <rmam>/<smam> based on the init string -- esr)
2904 vt340|dec-vt340|vt330|dec-vt330|DEC VT340 graphics terminal with 24 line page,
2905 am, eslok, hs, mir, msgr, xenl, xon,
2906 cols#80, it#8, lines#24, vt#3,
2907 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2908 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2909 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2910 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2912 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2913 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
2914 flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
2915 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2916 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2918 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2919 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2920 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2921 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2922 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2923 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2924 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2925 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2926 %p9%t\E(0%e\E(B%;$<2>,
2927 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2928 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2929 tsl=\E[2$~\E[1$}\E[1;%dH, use=vt220+cvis,
2931 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
2932 vt420+lrmm|VT420 left/right margins,
2933 mgc=\E[?69l, smglp=\E[?69h\E[%i%p1%ds,
2934 smglr=\E[?69h\E[%i%p1%d;%p2%ds,
2935 smgrp=\E[?69h\E[%i;%p1%ds,
2937 # DEC doesn't supply a VT400 description, so we add Daniel Glasser's
2938 # (originally written with VT420 as its primary name, and usable for it).
2940 # VT400/420 -- This terminal is a superset of the VT320. It adds the multiple
2941 # text pages and long text pages with selectable length of the VT340, along
2942 # with left and right margins, rectangular area text copy, fill, and erase
2943 # operations, selected region character attribute change operations,
2944 # page memory and rectangle checksums, insert/delete column, reception
2945 # macros, and other features too numerous to remember right now. TERMCAP
2946 # can only take advantage of a few of these added features.
2948 # Note that this entry is set up in what was the standard way for GNU
2949 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2950 # keys were switched into application mode at the same time the numeric pad
2951 # is switched into application mode. This changes the definitions of the
2952 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2953 # your termcap entry,
2955 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2956 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2957 # also, added <rmam>/<smam> based on the init string -- esr)
2958 vt400|vt400-24|dec-vt400|DEC VT400 24x80 column autowrap,
2959 am, eslok, mir, msgr, xenl, xon,
2960 cols#80, it#8, lines#24, vt#3,
2961 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2962 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r,
2963 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2964 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2965 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2966 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2967 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2968 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2969 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2970 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2971 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2973 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2974 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2975 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2976 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2977 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2978 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2979 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2980 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2981 %p9%t\E(0%e\E(B%;$<2>,
2982 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2983 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2984 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, use=vt220+cvis,
2986 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2987 # a missing <sc> -- esr)
2988 # add msgr and other capabilities from vt220 -TD
2990 am, mir, msgr, xenl, xon,
2991 cols#80, it#8, lines#24, vt#3,
2992 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2993 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2994 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2995 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2996 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>,
2997 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2998 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>,
2999 el=\E[K$<3>, el1=\E[1K, enacs=\E)0,
3000 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3001 ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3002 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3003 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3004 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
3005 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
3006 kf8=\E[20~, kf9=\E[21~, nel=\EE, rc=\E8, rev=\E[7m$<2>,
3007 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
3008 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3009 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3010 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3011 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3012 %p9%t\E(0%e\E(B%;$<2>,
3013 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3014 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3015 use=vt220+vtedit, use=ansi+pp, use=dec+sl, use=ansi+enq,
3016 use=vt220+cvis, use=vt420+lrmm,
3018 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3019 # takes two parameters, the key and the string. Translating the key is
3020 # straightforward (keys 1-5 are not defined on real terminals, though some
3021 # emulators define these):
3023 # if (key < 16) then value = key;
3024 # else if (key < 21) then value = key + 1;
3025 # else if (key < 25) then value = key + 2;
3026 # else if (key < 27) then value = key + 3;
3027 # else if (key < 30) then value = key + 4;
3028 # else value = key + 5;
3030 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3031 # There's no provision in terminfo for emitting a string in this format, so the
3032 # application has to know it.
3034 vt420pc|DEC VT420 w/PC keyboard,
3035 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3036 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3037 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3038 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3039 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3040 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3041 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3042 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3043 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3044 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3045 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3046 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3047 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3048 pctrm=USR_TERM:vt420pcdos:,
3049 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3050 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3054 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3056 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3057 %{127}%=%t\E\177%e%p1%c%;,
3059 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3060 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3062 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3063 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3064 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3065 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3066 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3067 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3068 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3073 vt510pc|DEC VT510 w/PC keyboard,
3075 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3080 # The VT520 is a monochrome text terminal capable of managing up to
3081 # four independent sessions in the terminal. It has multiple ANSI
3082 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3083 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3084 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3086 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3087 # [Alt]/[Print Screen] depending upon which keyboard and which
3088 # terminal mode is being used. If Set-Up has been disabled or
3089 # assigned to an unknown key, Set-Up may be entered by pressing
3090 # [F3] as the first key after power up, regardless of keyboard type.
3092 use=ansi+rca, use=vt420, use=ansi+tabs,
3097 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3098 # Keyboard, which replaces the old LK41R-AA keyboard.
3100 # In trying to get the function keys to work, I had to cobble my own
3101 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3102 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3103 # I seem to get them all -Mike Gran
3104 vt520ansi|Boundless VT520 ANSI,
3105 use=ansi+rca, use=vt420f, use=vt220+keypad,
3108 #### VT100 emulations
3110 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3111 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3112 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3113 # that this works best with a stock vt100 entry.
3114 dec-vt100|EWAN telnet's vt100 emulation,
3117 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3118 dec-vt220|DOS tnvt200 terminal emulator,
3121 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3122 # anyone who needs PC VT340 emulation. (or anything below that level, for
3123 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3124 # RDBM systems, it includes ReGIS and Sixel support! I'm impressed...
3125 # I can send the address if requested.
3126 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3127 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3128 z340|ZSTEM VT340 terminal emulator 132col 42line,
3130 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3131 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3132 z340-nam|ZSTEM VT340 terminal emulator 132col 42line (no automatic margins),
3134 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3135 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3137 # expect-5.44.1.15/example/tkterm
3138 # a minimal subset of a VT100 (compare with "news-unk).
3140 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3141 tt|tkterm|Don Libes' tk text widget terminal emulator,
3142 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3143 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3144 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3145 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3152 # nsterm*|Apple_Terminal - AppKit Terminal.app
3154 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
3155 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
3156 # Server and Mac OS X operating systems. There is also a
3157 # "terminal.app" in GNUstep, but I believe it to be an unrelated
3158 # codebase and I have not attempted to describe it here.
3160 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
3161 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
3162 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
3163 # version supports color.
3165 # To determine the version of Terminal.app you're using by running:
3167 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
3169 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
3171 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
3173 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
3175 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3177 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3179 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3180 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3181 # might work too, but really you're on your own here since these
3182 # systems are very obsolete and I can't test them. I do welcome
3183 # patches, though :).
3187 # For GNUstep_Terminal, you're probably best off using "linux" or
3188 # writing your own terminfo.
3190 # For MacTelnet, you're on your own. It's a different codebase, and
3191 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3193 # For iTerm.app, see "iterm".
3196 # The AppKit Terminal.app descriptions all have names beginning with
3197 # "nsterm". Note that the statusline (-s) versions use the window
3198 # titlebar as a phony status line, and may produce warnings during
3199 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3200 # Ignore these warnings, or even ignore these entries entirely. Apps
3201 # which need to position the cursor or do other fancy stuff inside the
3202 # status line won't work with these entries. They're primarily useful
3203 # for programs like Pine which provide simple notifications in the
3204 # status line. Please note that non-ASCII characters don't work right
3205 # in the status line, since Terminal.app incorrectly interprets their
3206 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3207 # versions) or only accepts status lines consisting entirely of
3208 # characters from the first 256 Unicode positions (including C1 but
3211 # The Mythology* of AppKit Terminal.app:
3213 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3214 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3215 # shareware replacement for Terminal called "Stuart" which NeXT bought
3216 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3217 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3218 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3219 # capabilities for the early versions, but I believe that the
3220 # TERM_PROGRAM_VERSION may have been reset at some point.
3222 # The early versions were tailored to the NeXT character set. Sometime
3223 # after the Apple acquisition the encoding was switched to MacRoman
3224 # (initially with serious altcharset bugs due to incomplete conversion
3225 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3226 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3227 # 8-color support (initially buggy when combined with attributes, but
3228 # that was later fixed.) More recently, around Mac OS X version 10.3
3229 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3230 # some versions (for instance 133-1 which shipped with Mac OS X
3231 # version 10.4) this suffered from the <bce> bug, but that seems to
3232 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3234 # In the early days of Mac OS X the terminal was fairly buggy and
3235 # would routinely crash under load. Many of these bugs seem to have
3236 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3237 # some may still remain. This change seems to correspond to
3238 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3239 # it did previously.
3241 # * This may correspond with what actually happened, but I don't
3242 # know. It is based on guesswork, hearsay, private correspondence,
3243 # my faulty memory, and the following online sources and references:
3245 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3246 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3248 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3249 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3251 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3252 # "nsterm" to comply with the name length and case conventions and
3253 # limitations of various software packages [notably Solaris terminfo
3254 # and UNIX.] A single Apple_Terminal alias is retained for
3255 # backwards-compatibility.
3257 # * Added function key support (F1-F4). These only work in Terminal.app
3258 # version 51, hopefully the capabilities won't cause problems for people
3261 # * Added "full color" (-c) entries which support the 16-color mode in
3264 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3265 # support, so "ASCII" (-7) entries without altcharset support were
3268 # nsterm - AppKit Terminal.app
3270 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3271 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3272 # extensions. This terminfo was written to describe versions 41
3273 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3274 # version 10.1) of Terminal.app.
3276 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3277 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3278 # use, the executable for Terminal.app is:
3279 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3281 # If you're looking for a description of the full-screen system
3282 # console which runs under Apple's Darwin operating system on PowerPC
3283 # platforms, see the "xnuppc" entry instead.
3285 # There were no function keys in version 41. In version 51, there are
3286 # four working function keys (F1, F2, F3 and F4.) The function keys
3287 # are included in all of these entries.
3289 # It does not support mouse pointer position reporting. Under some
3290 # circumstances the cursor can be positioned using option-click; this
3291 # works by comparing the cursor position and the selected position,
3292 # and simulating enough cursor-key presses to move the cursor to the
3293 # selected position. This technique fails in all but the simplest
3296 # It provides partial ANSI color support (background colors interacted
3297 # badly with bold in version 41, though, as reflected in :ncv:.) The
3298 # monochrome (-m) entries are useful if you've disabled color support
3299 # or use a monochrome monitor. The full color (-c) entries are useful
3300 # in version 51, which doesn't exhibit the background color bug. They
3301 # also enable an xterm-compatible 16-color mode.
3303 # The configurable titlebar is set using xterm-compatible sequences;
3304 # it is used as a status bar in the statusline (-s) entries. Its width
3305 # depends on font sizes and window sizes, but 50 characters seems to
3306 # be the default for an 80x24 window.
3308 # The MacRoman character encoding is used for some of the alternate
3309 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3310 # disable alternate character set support entirely, and the "VT100"
3311 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3312 # graphics emulation, which seems to think the character encoding is
3313 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3314 # are useful in Terminal.app version 51, which supports UTF-8 and
3315 # other ASCII-compatible character encodings but does not correctly
3316 # implement VT100 graphics; once VT100 graphics are correctly
3317 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3318 # usable in any ASCII-compatible character encoding [except perhaps
3319 # in UTF-8, where some experts argue for disallowing alternate
3320 # characters entirely.]
3322 # Terminal.app reports "vt100" as the terminal type, but exports
3323 # several environment variables which may aid detection in a shell
3324 # profile (i.e. .profile or .login):
3327 # TERM_PROGRAM=Apple_Terminal
3328 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3329 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3331 # For example, the following Bourne shell script would detect the
3332 # correct terminal type:
3334 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3337 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3345 # In a C shell derivative, this would be accomplished by:
3347 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3348 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3349 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3350 # setenv TERM "nsterm-old"
3352 # setenv TERM "nsterm-c-7"
3357 # The '+' entries are building blocks
3358 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3359 am, bw, msgr, xenl, xon,
3360 cols#80, it#8, lines#24,
3361 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3362 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3363 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3364 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3365 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3366 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3367 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3368 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3369 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3370 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3371 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3372 %p5%t;2%;%?%p7%t;8%;m,
3373 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3374 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3376 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3377 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3378 enacs=\E(B\E)0, rmacs=^O,
3379 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3380 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3381 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3383 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3384 acsc=+\335\,\334-\366.\3770#`\327a:f\241g\261h#i
3385 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3386 \271|\255}\243~\245,
3387 enacs=\E(B\E)0, rmacs=^O,
3388 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3389 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3390 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3392 # compare with xterm+sl-twm
3393 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3394 wsl#50, use=xterm+sl-twm,
3396 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3397 op=\E[0m, use=ibm+16color,
3399 nsterm+c41|AppKit Terminal.app v41 color support,
3400 colors#8, ncv#37, pairs#64,
3401 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3403 # These are different combinations of the building blocks
3405 # ASCII charset (-7)
3406 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3409 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3410 use=nsterm+s, use=nsterm+7,
3412 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3413 use=nsterm+c41, use=nsterm+7,
3415 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3416 use=nsterm+c, use=nsterm+7,
3418 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3419 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3421 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3422 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3424 # VT100 alternate-charset (-acs)
3425 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3428 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3429 use=nsterm+s, use=nsterm+acs,
3431 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3432 use=nsterm+c41, use=nsterm+acs,
3434 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3435 use=nsterm+c, use=nsterm+acs,
3437 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3438 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3440 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3441 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3444 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3447 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3448 use=nsterm+s, use=nsterm+mac,
3450 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3451 use=nsterm+c41, use=nsterm+mac,
3453 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3454 use=nsterm+c, use=nsterm+mac,
3456 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3457 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3459 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3460 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3462 # In Mac OS X version 10.5 the format of the preferences has changed
3463 # and a new, more complex technique is needed, e.g.,
3465 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3466 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3467 # ud.init();prefs=ud.persistentDomainForName_(
3468 # "com.apple.Terminal");prefs["Window Settings"][
3469 # prefs["Default Window Settings"]]["TerminalType"
3470 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3471 # "com.apple.Terminal")' nsterm-16color
3473 # and it is still not settable from the preferences dialog. This is
3474 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3475 # in Apple's bug reporter.
3477 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3478 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3479 # vt52, vt100, vt102 and xterm.
3480 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3482 dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l,
3483 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~,
3484 kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3485 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3486 kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~,
3487 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3488 khome=\E[H, knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8,
3489 rmir=\E[4l, smcup=\E7\E[?47h, smir=\E[4h,
3490 vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C,
3491 use=nsterm-c-s-acs, use=vt220+cvis,
3493 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3494 # the background color erase feature. The newer version 240.2 in Mac OS X
3495 # version 10.5 does not.
3497 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3498 # and D P Schreber comparing to nsterm-c-s-acs.
3500 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3501 # can be set in Terminal.app, e.g.,
3503 # defaults write com.apple.Terminal TermCapString nsterm-bce
3505 # and that it is not set in Terminal's preferences dialog.
3507 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3510 # * The terminal description matches the default settings.
3511 # * The keyboard is configurable via a dialog.
3512 # * By default khome, kend, knext and kprev are honored only with a
3514 # * There are bindings for control left/right arrow (but not up/down).
3515 # Added those to nsterm-16color, which is the version used for OS X 10.6
3516 # * "Allow VT100 application keypage mode" is by default disabled.
3517 # There is no way to press keypad-comma unless application mode is enabled
3519 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3520 # * CHT, REP, SU, SD are buggy.
3521 # * ECH works (also in Leopard), but is not used here for compatibility.
3522 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3523 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3524 # nsterm entry from this file to override the MacPorts (20110404) or
3525 # system (20081102) copy of this file.
3526 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3527 # dialog defaults to xterm-256color. Alternative selections are ansi,
3528 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3529 # the menu says "Declare terminal as" without promising to actually emulate
3530 # the corresponding terminals. Indeed, changing TERM does not affect the
3531 # emulation itself. This means that
3532 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3534 # + the color model is the same for each setting of TERM (does not match
3536 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3537 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3538 # + the VT52 emulation does not give a usable shell because screen-clearing
3539 # does not work as expected.
3540 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3541 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3542 # as well as unmasking F10 (which had been used in the window manager). Those
3543 # keys are listed in this entry.
3544 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3545 bce, use=nsterm-16color,
3547 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3548 # TERM_PROGRAM_VERSION=309
3549 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3550 # TERM_PROGRAM_VERSION=303
3551 nsterm-build309|Terminal.app in OS X 10.8,
3552 use=xterm+256setaf, use=nsterm-bce,
3554 # removed bogus kDC7 -TD
3555 nsterm-build326|Terminal.app in OS X 10.9,
3556 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3557 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3558 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3561 nsterm-build343|Terminal.app in OS X 10.10,
3562 kend=\EOF, khome=\EOH, use=nsterm-build326,
3564 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3566 # + no VT52 mode for cursor keys, though VT52 screen works in vttest
3567 # + f1-f4 map to pf1-pf4
3568 # + no VT220 support aside from DECTCEM and ECH
3569 # + there are no protected areas. Forget about anything above VT220.
3570 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3571 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3572 # + but bce fails for 11.6.7.2 (test repeat).
3573 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3574 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3575 # + normal (not X10 or Highlight tracking) mouse now works.
3576 # + mouse any-event works
3577 # + mouse button-event works
3578 # + in alternate screen:
3580 # mode 1047 fails to restore cursor position (do not use)
3581 # mode 1049 fails to restore screen contents (do not use)
3582 # + dtterm window-modify operations work (some messages are not printed)
3583 # + dtterm window-report gives size of window in characters/pixels as
3584 # well as state of window.
3586 # + there is no difference between cnorm/cvvis
3587 # + has dim/invis/blink (no protect of course)
3588 # + most function keys with shift/control modifiers give beep
3589 # (user can configure, but out-of-the-box is what I record)
3590 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3592 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3593 # + kLFT/kRIT work, but not up/down with shift-modifier
3594 # + there are a few predefined bindings with Alt, but no clear pattern.
3595 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3596 # Using ncurses test-program with xterm-new:
3598 # Using xterm's scripts:
3599 # + palette for 256-colors is hardcoded.
3600 # + no support for "dynamic colors"
3601 # + no support for tcap-query.
3602 nsterm-build361|Terminal.app in OS X 10.11,
3604 kmous=\E[M, use=nsterm-build343,
3606 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3607 # Comparing with build361, little has changed, except that italics work.
3608 # Direct-color is not supported, by the way.
3610 # Improved rmso/rmul -TD
3611 nsterm-build400|Terminal.app in OS X 10.13,
3612 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3613 use=ecma+italics, use=nsterm-build361,
3615 # This is an alias which should always point to the "current" version
3616 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3617 use=nsterm-build400,
3623 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3624 # featureful) terminal emulator for Mac OS X. It is similar enough in
3625 # capabilities to nsterm-16color that I have derived this description from that
3626 # one, but as far as I know they share no code. Many of the features are
3627 # user-configurable, but I attempt only to describe the default configuration
3630 # According to its documentation, iTerm uses terminfo to obtain function key
3631 # definitions. For example, if it is started with TERM=xterm, it uses key
3632 # definitions from that terminal description from the local OSX machine. Those
3633 # $TERM settings may be augmented using the bookmark and profile dialogs.
3634 # However, the behavior seen with tack does not agree with either the terminfo
3635 # description or the function keys in its "xterm" profile.
3639 # reports primary DA as VT100 with AVO: \E[?1;2c
3640 # reports secondary DA as "\E[>0;95;c"
3641 # supports blink and underline
3642 # displays bold text as red
3643 # recognizes all dtterm controls for modifying/querying window
3644 # resizing via escape sequence is very slow
3645 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3646 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3647 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3650 # with ncurses test-program:
3651 # ncurses 'k' has problem in second screen; light background does not fill
3652 # with xterm scripts
3653 # can display/alter xterm-256color cube
3654 # can display/alter xterm-88color cube
3655 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3656 am, bce, hs, mir, msgr, npc, xenl, xon,
3657 cols#80, it#8, lines#24, wsl#50,
3658 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3659 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3660 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3661 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3662 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3663 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3664 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3665 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3666 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3667 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3668 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3669 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3670 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3671 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3672 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3673 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3674 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3675 rmso=\E[m, rmul=\E[m,
3676 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3677 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3679 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3680 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3681 tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3682 use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
3683 use=xterm+x11mouse, use=xterm+256setaf, use=vt220+cvis,
3687 # https://iterm2.com/
3688 # https://github.com/gnachman/iTerm2
3689 # ~/Library/Preferences/com.googlecode.iterm2.plist
3690 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3694 # reports primary DA as VT100 with AVO: \E[?1;2c
3695 # reports secondary DA as "\E[>0;95;0c"
3696 # numeric keypad application mode does not work
3697 # by default, dtterm window-modifications are ignored
3698 # by default, dtterm window-reports return, but icon as "L", window as "l"
3699 # supports SD/SU, no REP, SL, SR
3700 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3701 # no improvement to XFree86 1047/1048 modes
3703 # in meta-mode, imitates xterm, sending UTF-8
3704 # special-key modifiers based on xterm use incompatible default for alt/meta
3705 # with ncurses test-program:
3707 # no improvement to ncurses 'k'
3708 # with xterm scripts:
3711 # Italic text did not work initially, apparently because upgrading did not
3712 # add/change that preference (set in Preferences, Profiles, Text). A new
3713 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3714 # option in the preferences dialog).
3716 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3717 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3718 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3719 blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
3720 kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
3721 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
3722 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
3723 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3724 kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
3725 op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
3726 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3727 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3728 %p5%t;2%;m%?%p9%t\016%e\017%;,
3729 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3730 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3731 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3732 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3733 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3734 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3735 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3736 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3737 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3738 use=xterm+alt+title, use=ecma+italics, use=iterm,
3740 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3742 # On PowerPC platforms, Apple's Darwin operating system uses a
3743 # full-screen system console derived from a NetBSD framebuffer
3744 # console. It is an ANSI-style terminal, and is not really VT-100
3747 # Under Mac OS X, this is the system console driver used while in
3748 # single-user mode [reachable by holding down Command-S during the
3749 # boot process] and when logged in using console mode [reachable by
3750 # typing ">console" at the graphical login prompt.]
3752 # If you're looking for a description of the Terminal.app terminal
3753 # emulator which runs under the Mac OS X Quartz windowing system (and
3754 # other AppKit-supported windowing systems,) see the "nsterm"
3757 # NOTE: Under Mac OS X version 10.1, the default login window does not
3758 # prompt for user name, instead requiring an icon to be selected from
3759 # a list of known users. Since the special ">console" login is not in
3760 # this list, you must make one of two changes in the Login Window
3761 # panel of the Login section of System Prefs to make the special
3762 # ">console" login accessible. The first option is to enable 'Show
3763 # "Other User" in list for network users', which will add a special
3764 # "Other..." icon to the graphical login panel. Selecting "Other..."
3765 # will present the regular graphical login prompt. The second option
3766 # is to change the 'Display Login Window as:' setting to 'Name and
3767 # password entry fields', which replaces the login panel with a
3768 # graphical login prompt.
3770 # There are no function keys, at least not in Darwin 1.3.
3772 # It has no mouse support.
3774 # It has full ANSI color support, and color combines correctly with
3775 # all three supported attributes: bold, inverse-video and underline.
3776 # However, bold colored text is almost unreadable (bolding is
3777 # accomplished using shifting and or-ing, and looks smeared) so bold
3778 # has been excluded from the list of color-compatible attributes
3779 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3780 # monochrome monitor.
3782 # There is one serious bug with this terminal emulation's color
3783 # support: repositioning the cursor onto a cell with non-matching
3784 # colors obliterates that cell's contents, replacing it with a blank
3785 # and displaying a colored cursor in the "current" colors. There is
3786 # no complete workaround at present [other than using the monochrome
3787 # (-m) entries,] but removing the (msgr) capability seemed to help.
3789 # The "standout" chosen was simple reverse-video, although a colorful
3790 # standout might be more aesthetically pleasing. Similarly, the bold
3791 # chosen is the terminal's own smeared bold, although a simple
3792 # color-change might be more readable. The color-bold (-b) entries
3793 # uses magenta colored text for bolding instead. The fancy color (-f
3794 # and -f2) entries use color for bold, standout and underlined text
3795 # (underlined text is still underlined, though.)
3797 # Apparently the terminal emulator does support a VT-100-style
3798 # alternate character set, but all the alternate character set
3799 # positions have been left blank in the font. For this reason, no
3800 # alternate character set capabilities have been included in this
3801 # description. The console driver appears to be ASCII-only, so (enacs)
3802 # has been excluded [although the VT-100 sequence does work.]
3804 # The default Mac OS X and Darwin installation reports "vt100" as the
3805 # terminal type, and exports no helpful environment variables. To fix
3806 # this, change the "console" entry in /etc/ttys from "vt100" to
3807 # "xnuppc-WxH", where W and H are the character dimensions of your
3808 # console (see below.)
3810 # The font used by the terminal emulator is apparently one originally
3811 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3812 # file includes descriptions for the following geometries:
3814 # Pixels Characters Entry Name (append -m for monochrome)
3815 # -------------------------------------------------------------------
3816 # 640x400 80x25 xnuppc-80x25
3817 # 640x480 80x30 xnuppc-80x30
3818 # 720x480 90x30 xnuppc-90x30
3819 # 800x600 100x37 xnuppc-100x37
3820 # 896x600 112x37 xnuppc-112x37
3821 # 1024x640 128x40 xnuppc-128x40
3822 # 1024x768 128x48 xnuppc-128x48
3823 # 1152x768 144x48 xnuppc-144x48
3824 # 1280x1024 160x64 xnuppc-160x64
3825 # 1600x1024 200x64 xnuppc-200x64
3826 # 1600x1200 200x75 xnuppc-200x75
3827 # 2048x1536 256x96 xnuppc-256x96
3829 # The basic "xnuppc" entry includes no size information, and the
3830 # emulator includes no reporting capability, so you'll be at the mercy
3831 # of the TTY device (which reports incorrectly on my hardware.) The
3832 # color-bold entries do not include size information.
3834 # The '+' entries are building blocks
3835 xnuppc+basic|Darwin PowerPC console basic capabilities,
3838 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3839 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3840 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3841 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3842 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3843 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3844 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3845 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3847 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3848 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3849 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3851 xnuppc+c|Darwin PowerPC console ANSI color support,
3852 colors#8, ncv#32, pairs#64,
3853 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3855 xnuppc+b|Darwin PowerPC console color-bold support,
3858 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3861 xnuppc+f|Darwin PowerPC console fancy color support,
3863 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3865 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3867 xnuppc+f2|Darwin PowerPC console alternate fancy color support,
3870 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3871 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3873 # Building blocks for specific screen sizes
3874 xnuppc+80x25|Darwin PowerPC console 80x25 support (640x400 pixels),
3877 xnuppc+80x30|Darwin PowerPC console 80x30 support (640x480 pixels),
3880 xnuppc+90x30|Darwin PowerPC console 90x30 support (720x480 pixels),
3883 xnuppc+100x37|Darwin PowerPC console 100x37 support (800x600 pixels),
3886 xnuppc+112x37|Darwin PowerPC console 112x37 support (896x600 pixels),
3889 xnuppc+128x40|Darwin PowerPC console 128x40 support (1024x640 pixels),
3892 xnuppc+128x48|Darwin PowerPC console 128x48 support (1024x768 pixels),
3895 xnuppc+144x48|Darwin PowerPC console 144x48 support (1152x768 pixels),
3898 xnuppc+160x64|Darwin PowerPC console 160x64 support (1280x1024 pixels),
3901 xnuppc+200x64|Darwin PowerPC console 200x64 support (1600x1024 pixels),
3904 xnuppc+200x75|Darwin PowerPC console 200x75 support (1600x1200 pixels),
3907 xnuppc+256x96|Darwin PowerPC console 256x96 support (2048x1536 pixels),
3908 cols#0x100, lines#96,
3910 # These are different combinations of the building blocks
3912 xnuppc-m|darwin-m|Darwin PowerPC console (monochrome),
3915 xnuppc|darwin|Darwin PowerPC console (color),
3916 use=xnuppc+c, use=xnuppc+basic,
3918 xnuppc-m-b|darwin-m-b|Darwin PowerPC console (monochrome w/color-bold),
3921 xnuppc-b|darwin-b|Darwin PowerPC console (color w/color-bold),
3922 use=xnuppc+b, use=xnuppc+c,
3924 xnuppc-m-f|darwin-m-f|Darwin PowerPC console (fancy monochrome),
3927 xnuppc-f|darwin-f|Darwin PowerPC console (fancy color),
3928 use=xnuppc+f, use=xnuppc+c,
3930 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC console (alternate fancy monochrome),
3933 xnuppc-f2|darwin-f2|Darwin PowerPC console (alternate fancy color),
3934 use=xnuppc+f2, use=xnuppc+c,
3936 # Combinations for specific screen sizes
3937 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC console (monochrome) 80x25,
3938 use=xnuppc+80x25, use=xnuppc+basic,
3940 xnuppc-80x25|darwin-80x25|Darwin PowerPC console (color) 80x25,
3941 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3943 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC console (monochrome) 80x30,
3944 use=xnuppc+80x30, use=xnuppc+basic,
3946 xnuppc-80x30|darwin-80x30|Darwin PowerPC console (color) 80x30,
3947 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3949 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC console (monochrome) 90x30,
3950 use=xnuppc+90x30, use=xnuppc+basic,
3952 xnuppc-90x30|darwin-90x30|Darwin PowerPC console (color) 90x30,
3953 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3955 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC console (monochrome) 100x37,
3956 use=xnuppc+100x37, use=xnuppc+basic,
3958 xnuppc-100x37|darwin-100x37|Darwin PowerPC console (color) 100x37,
3959 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3961 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC console (monochrome) 112x37,
3962 use=xnuppc+112x37, use=xnuppc+basic,
3964 xnuppc-112x37|darwin-112x37|Darwin PowerPC console (color) 112x37,
3965 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3967 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC console (monochrome) 128x40,
3968 use=xnuppc+128x40, use=xnuppc+basic,
3970 xnuppc-128x40|darwin-128x40|Darwin PowerPC console (color) 128x40,
3971 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3973 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC console (monochrome) 128x48,
3974 use=xnuppc+128x48, use=xnuppc+basic,
3976 xnuppc-128x48|darwin-128x48|Darwin PowerPC console (color) 128x48,
3977 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3979 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC console (monochrome) 144x48,
3980 use=xnuppc+144x48, use=xnuppc+basic,
3982 xnuppc-144x48|darwin-144x48|Darwin PowerPC console (color) 144x48,
3983 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3985 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC console (monochrome) 160x64,
3986 use=xnuppc+160x64, use=xnuppc+basic,
3988 xnuppc-160x64|darwin-160x64|Darwin PowerPC console (color) 160x64,
3989 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3991 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC console (monochrome) 200x64,
3992 use=xnuppc+200x64, use=xnuppc+basic,
3994 xnuppc-200x64|darwin-200x64|Darwin PowerPC console (color) 200x64,
3995 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3997 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC console (monochrome) 200x75,
3998 use=xnuppc+200x75, use=xnuppc+basic,
4000 xnuppc-200x75|darwin-200x75|Darwin PowerPC console (color) 200x75,
4001 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
4003 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC console (monochrome) 256x96,
4004 use=xnuppc+256x96, use=xnuppc+basic,
4006 xnuppc-256x96|darwin-256x96|Darwin PowerPC console (color) 256x96,
4007 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
4009 ######## DOS/WINDOWS
4010 # CRT is shareware. It implements some xterm features, including mouse.
4011 crt|crt-vt220|CRT 2.3 emulating VT220,
4014 hts=\EH, use=vt100+enq, use=vt220-base, use=ecma+color,
4016 # SecureCRT 8.7.3.2279
4017 # 8.7.3 was released 2020/08/11
4019 # VanDyke Software, Inc.
4021 # Advertised features:
4022 # Xterm 24-bit color
4024 # Double-size characters
4025 # Xterm extensions for mouse support and changing title bar
4026 # Emulates VT100, VT102, VT220, VT320, Linux console, SCO ANSI,
4027 # TN3270, TVI910, TVI925, Wyse 50/60, and ANSI.
4029 # Added ANSI sc/rc and REP in 2019/12/17
4030 # Added TVI910/ TVI925 in 2019/11/20
4033 # Emulate "Xterm", using "ANSI with 256color"
4034 # TERM=xterm-256color
4037 # DA1 \E[?62;1;2;6;7;8;9c (vt220 with DRCS and NRCS)
4039 # double-sized characters do not work
4040 # Menu-1 fails (window resizes to 132-columns, but does not repaint)
4041 # NRCS fails (tried French, but none of the replacements worked)
4042 # VT100 line-drawing works, except the C/R, etc., are an hline.
4043 # VT52 works except for S8C1T bug.
4044 # RIS hangs the terminal.
4045 # Local SRM does not echo.
4046 # Some of the VT320/VT220 status reports work, not locator or DECXCPR
4047 # DECUDK works if I press shift.
4048 # Fails CHT, CNL, CPL
4049 # Does not honor bce with ECH
4050 # ERM/SPA does not work
4051 # REP has 11 +'s except for final 2 +'s, like PuTTY.
4053 # DECRPM does not respond.
4054 # dtterm modify/report operations do not work
4055 # Alternate screen works.
4057 # highlight tracking does not work.
4058 # any event tracking does not work, but
4059 # button event tracking does work.
4060 # DEC locator does not work.
4061 # SGR coordinates does not work.
4063 # reset6 does reset to 80-columns
4064 # ncurses RGB edit does not work.
4065 # direct colors don't work, probably needs semicolons.
4067 # blink works, but not dim or invis
4068 # no italics or crossed-out
4070 # 256color handles "-r" option (but test/ncurses menu d does not alter)
4071 # dynamic colors queries do not work, though it seems some can be set.
4072 # resize.pl gets no reply, resize.sh needs fix for no reply.
4073 scrt|securecrt|SecureCRT emulating xterm-256color,
4075 bel@, cvvis@, kcbt=\E[Z, kent=\EOM, use=vt220+pcedit,
4076 use=xterm+256setaf, use=ecma+index, use=ansi+rep,
4077 use=xterm+keypad, use=xterm+pcfkeys, use=xterm-basic,
4081 # 11.24 was released 2020/08/13
4082 # Celestial Software
4084 # Advertised features:
4085 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT)
4086 # Double-size characters
4087 # Xterm extensions for mouse support
4088 # Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi,
4089 # ANSIBBS, WYSE60, TeleVideo 950.
4095 # DA1: \E[?62;1;2;6;7;8;9;15;22c (VT200 with DRCS, UDK, NRCS)
4098 # + NRCS tests do not work
4099 # + DECUDK test fails
4100 # + VT100 double-sized characters work
4101 # menu-1 autowrap does not work
4102 # supports blinking text
4103 # VT220 DECSCA last screen (ignoring ECH, etc), leaves fill on top/left
4104 # VT220 device status reports fail, except operating status
4105 # 8-bit controls work
4106 # xterm alternate screen recognized, but cursor restored incorrectly
4107 # xterm mouse (normal, any event, button event) works
4108 # xterm highlight-mouse does not work properly, confused with any-event
4109 # does not recognize SGR-mouse mode
4110 # supports xterm window-modifiny/reporting controls
4111 # supports ECMA-48 cursor movement except HPR
4112 # supports REP and SD, but not ECMA-48 SL, SR, SU
4114 # italics and crossed-out do not work
4115 # supports xterm-style modified function-keys, using X11R6 F1-F4.
4116 # does not support modified cursor-keys or editing-keys
4117 # uses VT220-style Home/End
4118 # if alt-keys are enabled,
4119 # meta-mode sends escape rather than shifting, in 7-bit mode
4120 # meta-mode does the expected shifting in 8-bit mode
4122 # supports 256-colors, including changing palette (ncurses menu d works)
4123 # supports UTF-8, but honors VT100 line-drawing
4124 absolute|Absolute Telnet emulating xterm,
4125 kcbt=\E[Z, use=ecma+index, use=ansi+rep,
4126 use=vt220+pcedit, use=xterm+keypad, use=xterm+app,
4127 use=xterm+pcf0, use=xterm+256color, use=xterm+x11mouse,
4131 # PuTTY 0.74 (27 June 2020)
4132 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
4134 # PuTTY 0.73 (September 2019)
4135 # Testing with tack:
4136 # does not implement italics
4137 # does not implement cross-out text
4138 # its settings dialog allows some of the VT100 line-drawing tests to pass
4139 # (not the padding test, though)
4140 # Testing with vttest:
4141 # xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented.
4142 # does not implement protected areas
4143 # does not implement SL/SR
4145 # PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also
4146 # changed longstanding keypad assignments, so that these no longer apply:
4147 # kLFT=\E[D, kRIT=\E[C, kb2=\E[G,
4149 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
4150 # in 2017 (0.70) -TD
4152 # Comparing with 0.51, vttest is much better (only a few problems with the
4153 # cursor position reports and wrapping).
4155 # PuTTY 0.51 (14 December 2000)
4157 # This emulates VT100 + VT52 (plus a few VT220 features: ech, SRM, DECTCEM, as
4158 # well as SCO and Atari, color palettes from Linux console). Reading the code,
4159 # it is intended to be VT102 plus selected features. By default, it sets $TERM
4160 # to xterm, which is incorrect, since several features are misimplemented:
4162 # Alt+key always sends ESC+key, so 'km' capability is removed.
4164 # Control responses, wrapping and tabs are buggy, failing a couple of
4165 # screens in vttest.
4167 # xterm mouse support is not implemented (unreleased version may).
4169 # Several features such as backspace/delete are optional; this entry documents
4170 # the default behavior. None of the combinations of keyboard settings match
4171 # those used for xterm -TD
4173 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
4174 # but implements it incorrectly as mentioned here:
4175 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
4176 putty|PuTTY terminal emulator,
4177 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
4178 colors#8, it#8, ncv#22, pairs#64, U8#1,
4179 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4180 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
4181 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4182 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
4183 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4184 dch=\E[%p1%dP, dch1=\E[P,
4185 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
4186 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
4187 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
4188 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
4189 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
4190 %%G\340\202\242\E%%@%e%p1%c%;,
4191 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4192 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
4193 home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\n,
4194 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
4195 %02x%p4%{255}%*%{1000}%/%02x,
4196 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
4197 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4198 kcuu1=\EOA, kind=\E[B, kri=\E[A, kspd=^Z, nel=\r\n, oc=\E]R,
4199 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4200 rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l,
4201 rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
4202 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
4203 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
4204 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4205 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4206 %;m%?%p9%t\016%e\017%;,
4207 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
4208 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
4209 smul=\E[4m, vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit,
4210 use=ansi+tabs, use=ansi+rep, use=ecma+index,
4211 use=xterm+sm+1006, use=putty+fnkeys, use=vt102+enq,
4212 use=xterm+sl, use=vt100+fnkeys, use=putty+keypad,
4214 putty+keypad|PuTTY numeric keypad,
4215 kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
4216 kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
4217 kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp,
4219 vt100-putty|Reset PuTTY to pure VT100,
4220 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
4222 putty-256color|PuTTY 0.58 with xterm 256-colors,
4223 use=xterm+256setaf, use=putty,
4224 putty-noapp|putty with cursor keys in normal mode,
4225 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4226 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
4229 # One of the keyboard selections is "VT100+".
4230 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
4231 putty-vt100|VT100+ keyboard layout,
4232 use=putty+fnkeys+vt100, use=putty,
4234 putty-sco|putty with SCO function keys,
4235 use=putty+fnkeys+sco, use=putty,
4237 # PuTTY has more than one section in its Keyboard configuration:
4238 # a) backspace/delete, which we ignore since that choice largely depends on
4239 # whether one matches Unix and BSD or Linux.
4240 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
4241 # are unrelated to rxvt's actual settings.
4242 # c) function keys and keypad - this is the interesting part. None of the
4243 # selections match any of their respective namesakes, but they are shown
4244 # here to help users who expect that the selections do what is implied.
4246 # This is the default setting for PuTTY
4247 putty+fnkeys|fn-keys for PuTTY,
4248 use=putty+fnkeys+esc,
4250 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
4251 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4252 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4253 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
4254 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
4255 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4257 putty+fnkeys+linux|Linux fn-keys for PuTTY,
4258 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4259 use=putty+fnkeys+esc,
4261 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
4262 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4263 use=putty+fnkeys+esc,
4265 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
4266 use=putty+fnkeys+esc,
4268 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
4270 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
4271 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
4272 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4273 kf9=\EOX, use=putty+fnkeys+esc,
4275 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
4277 # Use modifiers to obtain function keys past 12:
4280 # F25-F36 - control/alt
4281 # F37-F48 - control/shift
4283 putty+fnkeys+sco|SCO fn-keys for PuTTY,
4284 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4285 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4286 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4287 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4288 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4289 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4290 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4291 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4292 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4293 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4294 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4295 kich1=\E[L, knp=\E[G, kpp=\E[I,
4298 # https://github.com/mintty/mintty
4300 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
4301 # 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but
4302 # larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc).
4304 # Version 3.0 responds to DA as a VT400, however it does not implement the
4305 # application keypad. The assignment of cursor-keys versus modifiers differs
4306 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
4308 # Thomas Wolff suggested these extensions:
4309 # blink2 turn on rapid blinking
4310 # blink0 turn off blinking
4311 # norm turn off bold and half-bright mode
4312 # opaq turn off blank mode
4313 # smul2 begin double underline mode
4314 # smol begin overline mode
4315 # rmol exit overline mode
4316 # Font0 use default font
4317 # Font1 use alternative font 1
4319 # Font10 use alternative font 10
4320 # setal set (under)line color
4321 # ol set default (under)line color
4322 # overs overstrike (print characters over each other)
4324 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4325 mintty|Cygwin Terminal,
4326 setal=\E[5%p1%dm, use=xterm+256color,
4328 mintty-direct|Cygwin Terminal direct-color,
4329 use=kitty+setal, use=xterm+direct, use=mintty+common,
4330 mintty+common|shared capabilities for mintty,
4332 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4333 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4334 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1:2m,
4335 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4336 Smulx=\E[4:%p1%dm, blink2=\E[6m, norm=\E[22m,
4337 opaq=\E[28m, smul2=\E[21m, use=ansi+rep,
4338 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4339 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4340 use=ecma+italics, use=xterm-basic,
4341 # 2019-06-09: These capabilities are commented-out for compatibility with
4342 # existing releases 5.9-6.1, and may be considered for inclusion after the
4343 # release of ncurses 6.2:
4361 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4362 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4363 # (communication program) which supports:
4365 # - Serial port connections.
4366 # - TCP/IP (telnet) connections.
4367 # - VT100 emulation, and selected VT200/300 emulation.
4368 # - TEK4010 emulation.
4369 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4371 # - Scripts using the "Tera Term Language".
4372 # - Japanese and Russian character sets.
4374 # The program does not come with terminfo or termcap entries. However, the
4375 # emulation (testing with vttest and ncurses) is reasonably close to VT100 (no
4376 # VT52 or doublesize character support; blinking is done with color). Besides
4377 # the HPA, VPA extensions it also implements CPL and CNL.
4379 # All of the function keys can be remapped. This description shows the default
4380 # mapping, as installed. Both VT100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4381 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4382 # is laid out like VT220, rather than the face codes on the PC keyboard, i.e,
4390 # ANSI colors are implemented, but cannot be combined with video attributes
4391 # except for reverse.
4393 # No fonts are supplied with the program, so the acsc string is chosen to
4394 # correspond with the default Microsoft terminal font.
4396 # Tera Term recognizes some xterm sequences, including those for setting and
4397 # retrieving the window title, and for setting the window size (i.e., using
4398 # "resize -s"), though it does not pass SIGWINCH to the application if the
4399 # user resizes the window with the mouse.
4400 teraterm2.3|Tera Term Pro 2.3,
4403 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4404 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4405 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4406 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C,
4407 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4408 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4409 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l,
4410 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kf1=\E[11~,
4411 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4412 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4413 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4414 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4415 kf8=\E[19~, kf9=\E[20~, op=\E[100m, rev=\E[7m, ri=\EM,
4416 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4417 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt220+vtedit,
4418 use=vt100+enq, use=klone+color, use=vt100,
4421 # Version 4.59 has regular VT100 line-drawing (so it is no longer necessary
4422 # to choose a Windows OEM font).
4424 # Testing with tack:
4425 # - it does not have xenl (suppress that)
4426 # - underline seems to work with color (modify ncv).
4427 # Testing with vttest:
4428 # - wrapping differs from VT100 (menu 1).
4429 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4431 # - it recognizes the dtterm window controls for reporting size in
4432 # characters and pixels.
4433 # - it passes SIGWINCH.
4434 teraterm4.59|Tera Term Pro 4.59,
4437 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4438 kmous=\E[M, use=teraterm2.3,
4442 # Testing with tack:
4443 # - no bell (flash works)
4444 # - bold is yellow, blink is red.
4445 # - default keyboard sends ^? for Delete, can be configured for kdch1
4447 # Testing with vttest:
4448 # + autowrap has problems...
4449 # + color-tests for bce feature match xterm's behavior
4450 # + handles most of xterm's mouse-controls other than highlight-tracking.
4451 # xterm's SGR 1006 works.
4452 # + partial support for DEC locator-events
4453 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4454 # + has a "Tek" window, but does not work with vttest's examples
4455 # + supports the dtterm window modify/report controls
4456 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4458 # + VT220 screen-display tests are ok
4461 # + recognizes xterm's original direct-colors sequences, but result is
4463 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4464 teraterm4.97|Tera Term Pro 4.97,
4465 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4466 teraterm-256color|TeraTerm with xterm 256-colors,
4467 use=xterm+256setaf, use=teraterm,
4474 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4475 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4478 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4479 # for casual (occasional) use. Also fails several of the vttest screens,
4480 # but that is not unusual for VT100 "emulators".
4481 # b) Does not implement VT100 keypad
4482 # c) Recognizes a subset of VT52 controls.
4483 ms-vt100|MS telnet imitating DEC VT100,
4485 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4486 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4487 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4488 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4489 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4491 # Tested with Windows 2000, the telnet application runs in a console window,
4492 # also using 'Terminal' font.
4495 # a) This version has no function keys or numeric keypad. Unlike the older
4496 # version, the numeric keypad is entirely ignored.
4497 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4498 ms-vt100-color|vtnt|windows 2000 ANSI (sic),
4500 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4503 # Based on comments from Federico Bianchi:
4505 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4506 # scheme for PF keys.
4508 # and PuTTY wishlist:
4510 # The modifiers are represented as the codes listed above, prefixed to
4511 # the normal sequences. If the modifier is pressed alone, its sequence
4512 # is transmitted twice in succession. If multiple modifiers apply,
4513 # they're transmitted in the order shift, control, alt.
4518 ms-vt100+|vt100+|windows XP VT100+ (sic),
4519 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4520 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4521 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4522 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4523 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4524 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4525 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4526 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4527 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4528 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4529 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4530 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4531 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4532 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4533 knp=\E/, kpp=\E?, use=ms-vt100-color,
4535 ms-vt-utf8|vt-utf8|UTF-8 flavor of VT100+,
4538 # Windows Terminal (Preview)
4539 # https://github.com/microsoft/terminal
4542 # Version 1.9.1942.0
4544 # This has longstanding issues with CR/LF mapping, e.g.,
4545 # - first reported by Juergen Pfeifer August 13, 2020, with workaround
4546 # - Windows Terminal #8303 "Updates to ms-terminal terminal type in terminfo to
4548 # - Windows Terminal #6733 "Midnight Commander (mc) output is screwed when
4549 # using the 'ms-terminal' as $TERM"
4551 # still seen in testing during May-July 2021. As a workaround, this terminal
4552 # description sets cud1 to an escape sequence rather than just \r.
4554 # Using TERM=xterm-256color shows a number of problems.
4555 # A few are seen only in the WSL2 environment.
4558 # - flash does not work.
4559 # - video attribute blink does not work.
4560 # - video attribute invis does not work in WSL2.
4561 # - italics sitm/ritm do not work in WSL2.
4562 # - crossed-out smxx/rmxx do not work in WSL2.
4563 # - reloading colors via initp interchanges red/blue.
4564 # - does not implement OSC 104, which is used for resetting colors in xterm.
4565 # - does not support numeric keypad application mode.
4566 # - control-modifier (without alt/shift) does not work for special keys.
4567 # - meta-key sends escape character rather than acting as a meta key.
4570 # - identifies itself as a VT100.
4571 # - cursor movement (menu 1) does not work properly, e.g., for wrapping.
4572 # - does not support 8-bit controls.
4573 # - does not support VT420 rectangles.
4574 # - does not support VT420 left/right margins.
4575 # - ECMA-48 cursor-movement works.
4576 # - does not support X10 mouse, or mouse highlight tracking.
4577 # - SGR mouse mode 1006 works.
4578 # - any-event mouse mode shows no focus-in/focus-out events.
4579 # - alternate screen 47/48 modes do not work, nor do 1047/1048.
4580 # - alternate screen 1049 mode works.
4581 # - none of the window report/modify operations work.
4582 # - none of the DECRPM/DECRQM reporting operations work.
4585 # - 256colors2.pl -r, -i and -q options work.
4586 # - dynamic colors do not work.
4587 # - paste64.pl does not work, i.e., bracketed-paste.
4588 # - tcapquery.pl does not work.
4591 # Version 0.2.1831.0
4593 # The task manager shows this as "OpenConsole.exe", which differs
4594 # from the "Windows Command Processor" used for the command-prompt.
4596 # The settings dialog does not work (unless the end user expects to open
4597 # profiles.json in Visual Studio). There is no documentation, of course.
4599 # Testing via an ssh connection, using openssh:
4600 # - the program sets TERM to cygwin if the tab is set to PowerShell,
4601 # and to xterm-256color if "Legacy". However, in the latter, more tests
4602 # fail in vttest, which does not pay attention to TERM.
4604 # - menu 1 (tests for cursor movement) misbehaves like command-prompt
4605 # - primary DA says this is a vanilla VT100
4606 # - does not flush response to primary DA, leaving a ^M on the end when
4607 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
4608 # work properly in this test.
4609 # - in the generic VT100 tests, there are problems with character sets
4610 # (diamond shows as a double-width character, DEL as two replacement-chars).
4611 # - outside of the generic VT100 tests, the program does poorly because most
4612 # of the features are missing.
4613 # - ECH does not work properly
4614 # - a few generic xterm features are supported (set window title), but
4615 # others are missing (such as the mouse).
4616 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
4618 # - blink, dim, bold, invis, protect do not work
4619 # - bce works (but per vttest, with ED, EL, not ECH)
4620 # - does not support keypad application mode
4621 # - implements most of the xterm modified keys; sometimes modifiers are ignored
4622 # or simply incorrect
4623 # - sends escape+key rather than implementing meta mode
4625 # - color palette can be altered, but OSC 104 for resetting does not work
4626 # - crashed with a script used for testing NRCS.
4627 # - does not recognize either xterm+direct or xterm+indirect escapes.
4628 ms-terminal|Windows10 terminal,
4630 cud1=\E[B, kcbt=\E[Z, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@,
4631 Cr@, Ms@, use=xterm+256color, use=xterm+pcfkeys,
4632 use=ansi+rep, use=xterm+sm+1006, use=ecma+index,
4633 use=ecma+italics, use=ecma+strikeout, use=xterm-basic,
4637 # Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/).
4640 # - fixes menu 1 problem with wrapping
4642 # - fixes menu 8 problem with delete-character
4644 # - keypad application mode still does not work; PF1-PF4 are not assigned.
4645 # - DECRQM/DECRPM do not work
4646 # - xterm mouse features:
4647 # - SGR coordinates work; the other modes do not (see vscode #96058)
4648 # - focus-events are not sent
4649 # - mouse highlight tracking does not send button event
4651 # - little or no change since previous review
4653 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
4654 # https://code.visualstudio.com/docs/editor/integrated-terminal
4656 # This sets TERM to xterm-256color, which is a little more successful than
4660 # - menu 1 (cursor movement) has problems with wrapping
4661 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response
4662 # - menu 8 (insert/delete char/line) has problem with delete-character
4663 # - like Windows Terminal, fails the ECH test: neither supports DECALN
4664 # However, the bce test with ECH works.
4665 # - does not support keypad application mode
4666 # - supports most xterm mode controls (except DEC Locator Events)
4667 # - REP, SL/SL do not work, but SD/SU work.
4668 # - the alternate-screen tests fail because it does not support DECALN
4669 # - window modify/report is not supported
4670 # - supports some VT320 presentation reports
4672 # - does not support blinking text
4673 # - implements most of the xterm modified keys, with some exceptions:
4674 # - pageup/pagedown do not send escapes
4675 # - alt cursor left/right send escape-b and escape-f
4676 # - sends UTF-8 like xterm for meta mode
4678 # - mouse mode is not reset by reset-sequence
4679 # - supports italics and dim, but not cross-out or double-underline
4680 # - color-palette cannot be changed
4681 vscode|xterm.js|Visual Studio Code terminal using xterm.js,
4683 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=xterm+256setaf,
4684 use=ecma+index, use=xterm+sm+1006, use=xterm+pcfkeys,
4685 use=ecma+italics, use=xterm-basic,
4686 vscode-direct|Visual Studio Code with direct-colors,
4687 use=xterm+indirect, use=vscode,
4689 ######## X TERMINAL EMULATORS
4692 # You can add the following line to your .Xdefaults to change the terminal type
4693 # set by the xterms you start up to my-xterm:
4695 # *termName: my-xterm
4697 # System administrators can change the default entry for xterm instances
4698 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4699 # case, xterm will detect and reject an invalid terminal type, falling back
4700 # to the default of xterm.
4703 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4704 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4705 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4706 # as these seem not to work -- esr)
4707 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4708 OTbs, am, km, mir, msgr, xenl, xon,
4709 cols#80, it#8, lines#65,
4710 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4711 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4712 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4713 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4714 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4715 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4716 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4717 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4718 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4719 smso=\E[7m, smul=\E[4m,
4720 # csl is extension which clears the status line
4721 x10term+sl|status-line for X10 xterm,
4723 dsl=\E[?H, fsl=\E[?F, tsl=\E[?E\E[?%i%p1%dT, csl=\E[?E,
4725 # Compatible with the R5 xterm
4726 # (from the XFree86 3.2 distribution, <blink=@> removed)
4727 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4728 # corrected typos in rs2 string - TD
4730 xterm-r5|xterm R5 version,
4731 OTbs, am, km, msgr, xenl,
4732 cols#80, it#8, lines#24,
4733 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4734 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4735 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4736 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4737 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4738 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4739 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4740 kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[31~, kel=\E[8~, kf0=\EOq,
4741 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4742 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~,
4743 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
4744 kil1=\E[30~, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
4745 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4746 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4748 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4750 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4751 smul=\E[4m, tbc=\E[3g, use=vt220+pcedit, use=vt100+enq,
4754 # Compatible with the R6 xterm
4755 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4756 # added khome/kend, hts based on the R6 xterm code - TD
4757 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4758 # for compatibility with other emulators).
4759 xterm-r6|xterm X11R6 version,
4760 OTbs, am, km, mir, msgr, xenl,
4761 cols#80, it#8, lines#24,
4762 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4763 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4764 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4765 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4766 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4767 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4768 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4770 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4771 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
4772 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4773 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4774 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4775 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4776 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em,
4777 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
4778 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4779 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4780 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4781 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4782 use=vt220+vtedit, use=xterm+kbs, use=vt100+enq,
4783 xterm-old|antique xterm version,
4785 # The monochrome version began as a copy of "xtermm" (from Solaris), and was
4786 # initially part of the xterm sources (in XFree86). But "xterm" continued to
4787 # grow, while "xterm-mono" had none of the newer features. Additionally,
4788 # inheriting from "xtermm" runs into several problems, including different
4789 # function keys as well as the fact that the mouse support is not compatible.
4790 # This entry restores the original intent, intentionally not an alias to
4791 # simplify maintenance -TD
4792 xterm-mono|monochrome xterm,
4794 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4795 # The name has been changed and some aliases have been removed.
4796 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4797 OTbs, am, bce, km, mir, msgr, xenl, XT,
4798 cols#80, it#8, lines#24, ncv@,
4799 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4800 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
4801 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4802 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4803 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4804 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4805 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4806 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4807 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4809 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4810 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4811 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4812 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4813 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4814 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4815 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4816 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4817 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4818 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4819 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4820 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4822 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4824 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4826 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4827 %;m%?%p9%t\016%e\017%;,
4828 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4829 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4830 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4831 use=ecma+color, use=vt220+cvis, use=vt220+keypad,
4833 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4834 # codes for F1-F4 except while in VT220 mode.
4835 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4836 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4838 # This version was released in XFree86 3.3.3 (November 1998).
4839 # Besides providing printer support, it exploits a new feature that allows
4840 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4841 # -- the distribution contained incorrect khome/kend values -TD
4842 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4843 blink=\E[5m, ich1@, invis=\E[8m,
4844 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4845 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4846 rs2=\E[!p\E[?3;4l\E[4l\E>,
4847 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4848 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4849 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4852 # This version was released in XFree86 4.0.
4853 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4855 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4856 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4857 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4858 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4859 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4860 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4861 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4862 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4863 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4864 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4865 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4866 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4867 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4868 kf48=\E[24;6~, khome=\EOH,
4869 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4871 use=xterm+alt1049, use=xterm-xf86-v333,
4873 # This version was released in XFree86 4.3.
4874 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4875 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4876 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4878 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4879 %p7%t;8%;m%?%p9%t\016%e\017%;,
4882 # Controlling the cursor-visibility is not a "new" feature, but was generally
4883 # neglected in terminal emulators until the mid-1990s. These would work for
4884 # the hardware terminals, or for more recent emulators, e.g., xterm.
4885 vt220+cvis|DECTCEM VT220 cursor-visibility,
4886 civis=\E[?25l, cnorm=\E[?25h,
4887 vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility,
4888 civis=\233?25l, cnorm=\233?25h,
4889 # The cvvis capability was unused in the SVr4 terminal descriptions for the
4890 # AT&T terminals, and there are no available documents as of 2021 which can
4891 # provide that it would have worked. The first block is used for those 1980s
4892 # terminals; the second is used for terminals whose behavior can be verified.
4893 att610+cvis0|AT&T 610 cursor-visibility,
4894 civis=\E[?25l, cnorm=\E[?25h\E[?12l,
4895 att610+cvis|xterm cursor-visibility in XFree86 4.4,
4896 civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
4898 # This version was released in XFree86 4.4.
4899 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4900 use=att610+cvis, use=ecma+index, use=xterm-xf86-v43,
4902 xterm-xfree86|xterm terminal emulator (XFree86),
4905 xterm+nofkeys|building block for xterm fkey-variants,
4907 kcbt=\E[Z, kent=\EOM, nel=\EE, use=ecma+index,
4908 use=ansi+rep, use=ecma+strikeout, use=vt420+lrmm,
4909 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics,
4910 use=xterm+keypad, use=xterm-basic,
4912 xterm-p370|xterm patch #370,
4914 kcbt=\E[Z, kent=\EOM, nel=\EE, use=ecma+index,
4915 use=ansi+rep, use=ecma+strikeout, use=xterm+pcfkeys,
4918 xterm-p371|xterm patch #371,
4919 use=dec+sl, use=xterm-p370,
4921 # This version reflects the current xterm features.
4922 xterm-new|modern xterm terminal emulator,
4925 # This fragment is for people who cannot agree on what the backspace key
4927 xterm+kbs|fragment for backspace key,
4930 # This fragment describes as much of XFree86 xterm's "pc-style" function
4931 # keys as will fit into terminfo's 60 function keys.
4934 # ---------------------------------
4941 # 8 Shift + Alt + Control
4942 # ---------------------------------
4943 # The meta key may also be used as a modifier in this scheme, adding another
4944 # bit to the parameter.
4945 xterm+pcfkeys|xterm fragment for PC-style fkeys,
4946 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4949 # The xterm ctrlFKeys resource defaults to 10, so without the "pc-style"
4950 # feature, e.g., setting the modifyCursorKeys and modifyFunctionKeys resources
4951 # to -1 to disable them, one gets 42 function-keys on a 12-function-key
4954 # kf11 shift f1 = \E[23~
4955 # kf21 control f1 = \E[42~
4956 # kf31 shift control f1 = \E[52~
4957 xterm+nopcfkeys|fragment without PC-style fkeys,
4958 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4959 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4960 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
4961 kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~,
4962 kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~,
4963 kf28=\E[49~, kf29=\E[50~, kf3=\E[13~, kf30=\E[51~,
4964 kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~,
4965 kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~,
4966 kf39=\E[60~, kf4=\E[14~, kf40=\E[61~, kf41=\E[62~,
4967 kf42=\E[63~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4968 kf8=\E[19~, kf9=\E[20~,
4970 xterm+noapp|fragment with cursor keys in normal mode,
4971 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4974 xterm+app|fragment with cursor keys in application mode,
4975 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4978 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4979 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4980 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4982 # The original assignments from patch #94 for cursor-keys had some technical
4985 # A parameter for a function-key to represent a modifier is just more
4986 # bits. But for a cursor-key it may change the behavior of the
4987 # application. For instance, emacs decodes the first parameter of a
4988 # cursor-key as a repeat count.
4990 # A parameterized string should (really) not begin with SS3 (\EO).
4991 # Rather, CSI (\E[) should be used.
4993 # For these reasons, the original assignments were deprecated. For
4994 # compatibility reasons, they are still available as a setting of xterm's
4995 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4996 # that might apply to xterm+pcfkeys with different values of that resource.
4998 # These entries will have warnings when checking with tic because the kri/kind
4999 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
5000 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
5001 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
5003 # * modify xterm-new terminfo entry to use capabilities for shifted
5004 # scroll forward/reverse as shifted cursor up/down.
5006 # In the 1980s when terminfo was defined, the developers made more of
5007 # a distinction between shifted up/down versus shifted left/right since most
5008 # terminals can index (scroll up/down), while few can scroll left/right.
5009 xterm+pcc3|fragment with modifyCursorKeys:3,
5010 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
5011 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
5012 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
5013 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
5014 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
5015 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
5016 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
5017 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
5020 xterm+pcc2|fragment with modifyCursorKeys:2,
5021 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
5022 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
5023 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
5024 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
5025 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
5026 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
5027 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
5029 xterm+pcc1|fragment with modifyCursorKeys:1,
5030 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
5031 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
5032 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
5033 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
5034 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
5035 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
5037 xterm+pcc0|fragment with modifyCursorKeys:0,
5038 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
5039 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
5040 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
5041 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
5042 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
5043 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
5046 # Here are corresponding fragments from xterm patch #216:
5048 xterm+pcf0|fragment with modifyFunctionKeys:0,
5049 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5050 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
5051 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
5052 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
5053 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
5054 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
5055 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
5056 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
5057 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
5058 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
5059 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5060 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
5061 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
5062 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
5063 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
5064 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
5065 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5067 xterm+pcf2|fragment with modifyFunctionKeys:2,
5068 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5069 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
5070 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
5071 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
5072 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
5073 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
5074 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
5075 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
5076 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
5077 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
5078 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5079 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
5080 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
5081 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5082 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5083 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5084 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5085 kf8=\E[19~, kf9=\E[20~,
5087 # Chunks from xterm #230:
5088 xterm+pce2|fragment with modifyCursorKeys:2 editing-keys,
5089 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
5090 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
5091 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
5092 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
5093 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
5094 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
5095 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
5096 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
5097 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
5098 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
5099 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
5102 xterm+edit|fragment for 6-key editing-keypad,
5103 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5106 xterm+pc+edit|fragment for pc-style editing keypad,
5107 kend=\E[4~, khome=\E[1~,
5109 xterm+vt+edit|fragment for VT220-style editing keypad,
5110 kfnd=\E[1~, kslt=\E[4~,
5112 # These variations for alternate-screen and title-stacking were introduced by
5114 xterm+noalt|xterm without altscreen,
5117 xterm+alt1049|xterm 90 feature,
5118 rmcup=\E[?1049l, smcup=\E[?1049h,
5120 xterm+titlestack|xterm 251 feature,
5121 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
5123 xterm+alt+title|xterm 90 and 251 features combined,
5124 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
5126 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
5128 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
5129 # problem that the keypad layout is different, and that the natural choice for
5130 # PF1 is NumLock (which happens to be reserved for other use). To work around
5131 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
5132 # directly related to VT100.
5134 # With the VT220 keypad block that uses the 1-9 keys as suggested in
5135 # terminfo(5), the other keys can be handled with user-defined capabilities:
5137 # _______________________________________
5138 # | NumLock | / | * | - |
5139 # | | $Oo | $Oj | $OS |
5140 # |_________|__kpDIV__|__kpMUL__|__kpSUB__|
5142 # | $Ow | $Ox | $Oy | $Ok |
5143 # |_ka1__K1_|_________|_ka3__K3_| kpADD |
5145 # | $Ot | $Ou | $Ov | |
5146 # |_________|_kb2__K2_|_________|_________|
5148 # | $Oq | $Or | $Os | |
5149 # |_kc1__K4_|_________|_kc3__K5_| enter |
5152 # |_______kpZRO_______|__kpDOT__|_kent_@8_|
5154 # ka2, kb1, kb3 and kc2 are extensions, as are the mixed-case names.
5155 # There are no termcap equivalents for these extensions.
5157 # kpCMA (comma) is used here for the VT100 keypad, which xterm emulates with
5158 # shifted-keypad-plus, though normally that invokes a font-size change.
5160 # Old versions of xterm, e.g., xterm-xfree86, documented \EOE as kb2, which
5161 # does not fit into this layout. The extension kp5 fits, but is not visible
5162 # to termcap applications. As an alternative, kbeg (which does have a termcap
5163 # equivalent) is provided.
5165 xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
5166 kbeg=\EOE, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo,
5167 kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp,
5170 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
5171 # Alternatively, the same scheme with old-style function keys as in xterm-r6
5172 # is shown here (because that is used in mrxvt and mlterm):
5173 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
5174 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
5175 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
5176 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
5177 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
5178 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
5179 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
5180 kf63=\E[13;4~, use=xterm+pcf2,
5182 xterm+acs|ISO-2022 alternate character-switching for xterm,
5183 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5184 enacs@, rmacs=\E(B, smacs=\E(0,
5186 # This chunk is used for building the VT220/Sun/PC keyboard variants.
5187 xterm-basic|modern xterm terminal emulator - common,
5188 OTbs, am, bce, mir, msgr, xenl, AX, XT,
5189 colors#8, cols#80, it#8, lines#24, pairs#64,
5190 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5191 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
5192 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5193 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5194 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5195 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5196 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5197 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5198 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5199 ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
5200 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
5201 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
5202 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5203 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
5205 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5207 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5209 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
5210 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5211 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
5212 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5213 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
5214 use=xterm+alt+title, use=ansi+enq, use=att610+cvis,
5217 xterm+meta|meta mode for xterm,
5219 rmm=\E[?1034l, smm=\E[?1034h,
5221 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
5222 # In retrospect, something like xterm-r6 was intended here -TD
5223 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
5224 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
5228 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
5231 # If configured to support 88- or 256-colors (which is fairly common in 2009),
5232 # xterm also recognizes the control sequences for initc -TD
5233 xterm-16color|xterm with 16 colors like aixterm,
5235 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5236 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5237 use=xterm+osc104, use=ibm+16color, use=xterm-new,
5239 # 256-colors is a compile-time feature of XFree86 xterm beginning with
5240 # xterm patch #111 (1999/7/10) -TD
5241 xterm+256color|original xterm 256-color feature,
5243 colors#0x100, pairs#0x10000,
5244 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5245 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5247 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5249 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5253 # The semicolon separator used in xterm+256color does not follow the ECMA-48
5254 # standard. Since patch #282 (in 2012), xterm has supported both the legacy
5255 # subparameter separator (semicolon) and the standard (colon).
5257 # The xterm FAQ gives some of the history:
5258 # https://invisible-island.net/xterm/xterm.faq.html#color_by_number
5259 xterm+256color2|xterm 256-color feature,
5260 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48:
5262 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38:5
5266 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color
5267 # has the drawback that some of the xterm-alikes which use that building block
5268 # require a different approach to rs1 -TD
5269 xterm+osc104|reset color palette,
5270 oc=\E]104\007, rs1=\Ec\E]104\007,
5272 # palette is hardcoded...
5273 xterm+256setaf|xterm 256-color (set-only),
5275 colors#0x100, pairs#0x10000,
5276 initc@, op=\E[39;49m,
5277 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5279 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5283 # 88-colors is a compile-time feature of XFree86 xterm beginning with
5284 # xterm patch #115 (1999/9/18) -TD
5286 # Note that the escape sequences used are the same as for 256-colors - xterm
5287 # has a different table of default color resource values. If built for
5288 # 256-colors, it can still handle an 88-color palette by using the initc
5291 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
5292 # which support the xterm+256color feature support the associated initc
5293 # capability. So it is cancelled in the entries which use this and/or the
5294 # xterm+256color block.
5296 # The default color palette for the 256- and 88-colors are different. A
5297 # given executable will have one palette (perhaps compiled-in). If the program
5298 # supports xterm's control sequence, it can be programmed using initc.
5299 xterm+88color|original xterm 88-color feature,
5300 colors#88, pairs#7744, use=xterm+256color,
5302 xterm+88color2|xterm 88-color feature,
5303 colors#88, pairs#7744, use=xterm+256color2,
5305 # These variants of XFree86 3.9.16 xterm are built as a configure option.
5306 xterm-256color|xterm with 256 colors,
5307 use=xterm+osc104, use=xterm+256color, use=xterm-new,
5308 xterm-88color|xterm with 88 colors,
5309 use=xterm+osc104, use=xterm+88color,
5312 # Emacs 26.1 and later support direct color mode in terminals, using a
5313 # combination of user-defined capabilities and ncurses-dependent function
5314 # calls. We will not include that here.
5316 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
5317 # is of interest only to the numerically illiterate), is compatible with other
5318 # terminal descriptions written for curses. It relies upon the extended range
5319 # for numeric capabilities provided in ncurses 6.1:
5320 xterm+direct2|xterm with direct-color indexing (old building-block),
5322 colors#0x1000000, pairs#0x10000, CO#8,
5323 initc@, op=\E[39;49m,
5324 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2:%p1%{65536}%/%d:%p1%{256}
5325 %/%{255}%&%d:%p1%{255}%&%d%;m,
5326 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2:%p1%{65536}%/%d:%p1%{256}
5327 %/%{255}%&%d:%p1%{255}%&%d%;m,
5329 xterm-direct2|xterm with direct-color indexing (old),
5330 use=xterm+direct2, use=xterm+titlestack, use=xterm,
5332 # That in turn had a problem: in the original patch submitted for KDE konsole
5333 # in 2006, the submitter and the developer alike overlooked a "color space
5334 # identifier" parameter. This version provides for that parameter:
5335 xterm+direct|xterm with direct-color indexing (building-block),
5337 colors#0x1000000, pairs#0x10000, CO#8,
5338 initc@, op=\E[39;49m,
5339 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2::%p1%{65536}%/%d:%p1
5340 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5341 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2::%p1%{65536}%/%d:%p1
5342 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5344 xterm-direct|xterm with direct-color indexing,
5345 use=xterm+direct, use=xterm,
5347 # Here are corresponding flavors for terminals which could use the feature:
5348 iterm2-direct|iTerm2 with direct-color indexing,
5349 use=xterm+direct, use=iterm2,
5350 mlterm-direct|mlterm with direct-color indexing,
5351 use=xterm+direct, use=mlterm,
5353 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
5354 # that xterm's original implementation should have used colons for the
5355 # subparameter separators, but chose not to correct this in konsole. As of
5356 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
5357 xterm+indirect|xterm with direct-color indexing (old legacy building-block),
5359 colors#0x1000000, pairs#0x10000,
5360 initc@, op=\E[39;49m,
5361 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
5362 %/%{255}%&%d;%p1%{255}%&%d%;m,
5363 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
5364 %/%{255}%&%d;%p1%{255}%&%d%;m,
5366 konsole-direct|konsole with direct-color indexing,
5367 use=xterm+indirect, use=konsole,
5368 st-direct|simpleterm with direct-color indexing,
5369 use=xterm+indirect, use=st,
5370 vte-direct|VTE with direct-color indexing,
5371 use=xterm+indirect, use=vte,
5372 # reportedly in Apple's Mohave (fall 2018), but untested -TD
5373 nsterm-direct|nsterm with direct-color indexing,
5374 use=xterm+indirect, use=nsterm,
5376 # As for others (commenting at the time of release for ncurses 6.1):
5377 # + Apple's Terminal.app does not recognize either form of the direct-color
5379 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
5380 # the colors. Like vte, it is a subset of xterm, although different
5381 # omissions/reservations of modified-keys are seen in testing.
5382 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
5383 # nothing useful with the colors.
5384 # + Teraterm 4.97, like PuTTY (no good).
5385 # + terminology 0.91 recognizes xterm's original implementation, but does
5386 # nothing useful with it.
5388 # Reviewing after ncurses 6.2:
5389 # + Apple's Terminal.app is unchanged, has no support for direct color:
5390 # Catalina 10.15.5 Terminal.app 2.10 (433)
5391 # Mohave 10.14.6 - Terminal.app 2.9.5 (421.2)
5392 # + Cygwin's mintty 3.1.7 works with colon/semicolon
5393 # + PuTTY 0.73 works with semicolon
5394 # + Teraterm 4.105 works with semicolon
5395 # + terminology 1.7.0 works with colon/semicolon.
5397 # Other variants are possible, e.g., by using more of xterm's indexed color
5398 # palette, though the intrusion of indexed colors on the direct-color space
5399 # would be more noticeable.
5401 xterm+direct16|xterm with direct-color indexing (16-color building-block),
5403 setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48
5404 :2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&
5406 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%d%e38:
5407 2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
5409 setb@, setf@, use=xterm+direct,
5411 xterm-direct16|xterm with direct-colors and 16 indexed colors,
5412 use=xterm+direct16, use=xterm,
5414 xterm+direct256|xterm with direct-color indexing (256-color building-block),
5416 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
5417 %p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1
5418 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5419 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%?
5420 %p1%{256}%<%t38;5;%p1%d%e38:2::%p1%{65536}%/%d:%p1
5421 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5422 setb@, setf@, use=xterm+direct,
5424 xterm-direct256|xterm with direct-colors and 256 indexed colors,
5425 use=xterm+direct256, use=xterm,
5429 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
5430 # asked for some of xterm's advanced features to be added to its terminfo
5431 # entry. It defines extended capabilities not found in standard terminfo or
5432 # termcap. These are useful in tmux, for instance, hence the name.
5434 # One caveat in adding extended capabilities in ncurses is that if the names
5435 # are longer than two characters, then they will not be visible through the
5436 # termcap interface.
5438 # Ms modifies the selection/clipboard. Its parameters are
5439 # p1 = the storage unit (clipboard, selection or cut buffer)
5440 # p2 = the base64-encoded clipboard content.
5442 # Ss is used to set the cursor style as described by the DECSCUSR
5443 # function to a block or underline.
5444 # Se resets the cursor style to the terminal power-on default.
5446 # Cs and Cr set and reset the cursor colour.
5447 xterm+tmux|advanced xterm features used in tmux (cursor style 2),
5448 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
5449 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
5450 xterm+tmux2|advanced xterm features used in tmux,
5451 Cr=\E]112\E\\, Cs=\E]12;%p1%s\E\\,
5452 Ms=\E]52;%p1%s;%p2%s\E\\, Se=\E[ q, Ss=\E[%p1%d q,
5454 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
5455 # This is an 8-bit version of xterm, which emulates DEC VT220 with ANSI color.
5456 # To use it, your decTerminalID resource must be set to 200 or above.
5463 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
5464 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
5465 colors#8, cols#80, it#8, lines#24, pairs#64,
5466 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5467 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
5468 civis=\233?25l, clear=\233H\2332J,
5469 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
5470 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
5471 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
5472 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
5473 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
5474 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
5475 flash=\233?5h$<100/>\233?5l, home=\233H,
5476 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
5477 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
5478 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5480 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
5481 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
5482 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
5483 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
5484 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
5485 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
5486 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
5487 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
5488 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
5489 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
5490 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
5491 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
5492 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
5494 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5496 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
5497 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5498 %{6}%=%t3%e%p1%d%;m,
5499 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5500 %{6}%=%t3%e%p1%d%;m,
5501 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5502 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
5503 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
5504 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
5505 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
5506 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
5507 vpa=\233%i%p1%dd, use=xterm+kbs,
5509 # Note: normally xterm supports modified function-keys as described in
5510 # XTerm - "Other" modified keys
5511 # https://invisible-island.net/xterm/modified-keys.html
5513 # However, xterm-hp, xterm-sco and xterm-sun assume no modifiers. Here is
5514 # a simple script which demonstrates these descriptions:
5516 # export TERM=xterm-$1
5522 # -xrm '*modifyCursorKeys:-1' \
5523 # -xrm '*modifyFunctionKeys:-1' \
5525 # e.g., "foo sun" if the script is named "foo" -TD
5526 xterm-hp|xterm with hpterm function keys,
5527 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5528 kdch1=\EP, kend=\EF, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET,
5529 use=hp+pfk-cr, use=xterm+nofkeys, use=xterm+nopcfkeys,
5531 xterm-sco|xterm with SCO function keys,
5532 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5533 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
5534 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
5535 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
5536 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
5537 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
5538 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
5539 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
5540 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
5541 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
5542 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
5543 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
5546 # The xterm-new description has all of the features, but is not completely
5547 # compatible with VT220. If you are using a Sun or PC keyboard, set the
5548 # sunKeyboard resource to true:
5549 # + maps the editing keypad
5550 # + interprets control-function-key as a second array of keys, so a
5551 # 12-fkey keyboard can support VT220's 20-fkeys.
5552 # + maps numeric keypad "+" to ",".
5553 # + uses DEC-style control sequences for the application keypad.
5555 xterm-vt220|xterm emulating VT220,
5557 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5558 kend=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
5559 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5560 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5561 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5562 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5563 kmous=\E[M, knp=\E[6~, kpp=\E[5~, nel=\EE, use=xterm+app,
5564 use=xterm+edit, use=vt220+keypad, use=ecma+italics,
5565 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
5566 use=xterm+sm+1006, use=xterm+tmux, use=xterm+keypad,
5569 xterm-vt52|xterm emulating DEC VT52,
5570 cols#80, it#8, lines#24,
5571 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5572 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
5573 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
5574 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5575 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
5576 use=xterm+kbs, use=vt52+keypad,
5578 xterm-noapp|xterm with cursor keys in normal mode,
5579 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
5582 xterm-24|vs100|xterms|xterm terminal emulator 24-line (X Window System),
5583 lines#24, use=xterm-old,
5585 # This is xterm for ncurses.
5586 xterm|xterm terminal emulator (X Window System),
5589 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
5590 # setting the vt100Graphics resource to false.
5591 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5594 # These building-blocks allow access to the X titlebar and icon name as a
5595 # status line. There are a few problems in using them in entries:
5597 # a) tsl should have a parameter to denote the column on which to transfer to
5599 # b) the "0" code for xterm updates both icon-title and window title. Some
5600 # window managers such as twm (and possibly window managers descended from
5601 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
5602 # don't want to mess with icon-name when using those window managers.
5603 # c) fsl ends the escape sequence begun by tsl. Printable characters between
5604 # those (probably) will appear in the window title. Nonprintable characters
5605 # may cause the escape sequence to end with an error.
5606 # d) the BEL (^G or \007) used in the original title-as-statusline came from
5607 # David J. MacKenzie's "pseudo-color" entry in 20 Apr 1995. At that time
5608 # xterm used BEL as the string-terminator rather than ST (\E\\). Either
5609 # BEL or ST has worked since xterm patch #28 in 1996, but most uses of
5610 # this feature have been embedded in shell scripts.
5612 # But that issue regarding the parameter for tsl means that applications may
5613 # not rely on it. The SVr4 documentation says tsl will "move to status line,
5614 # column #1". At the point in time when ESR added DJM's "pseudo-color" entry
5615 # with the split-up escape sequence for tsl/fsl, there were 65 entries using
5617 # 32 used a parameter, matching the documentation (including x10term).
5618 # 21 used a parameterless control, exiting from the status line on ^M.
5619 # 6 used parameterless controls for tsl and fsl
5620 # 6 used a split-up escape sequence, e.g., the same approach.
5622 # The extension "TS" is preferable, because it does not accept a parameter.
5623 # However, if you are using a non-extended terminfo, "TS" is not visible.
5624 xterm+sl|access X title line and icon name,
5626 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
5627 xterm+sl-twm|access X title line (pacify twm-descended window managers),
5629 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
5630 xterm+sl-alt|alternate access X title line,
5632 dsl=\E]2;\E\\, fsl=\E\\, tsl=\E]2;, TS=\E]2;,
5634 # In contrast, this block can be used for a DEC VT320 and up. There are two
5637 # DECSASD (select active status display)
5638 # \E[0$} Main display
5639 # \E[1$} Status line
5641 # DECSSDT (select status line type)
5642 # \E[0$~ No status line
5643 # \E[1$~ Indicator status line
5644 # \E[2$~ Host-writable status line
5646 # The building block assumes that the terminal always shows something at the
5647 # status line (either the indicator, or status line). That is because if no
5648 # status line is used, then the terminal makes that line part of the user
5649 # window, changing its size without notice.
5651 # Because there is no "esl" (enable status line) capability, the "tsl"
5652 # capability ensures that the status line is host-writable. A DEC terminal
5653 # will clear the status line when changing from indicator to host-writable
5656 # Once on the status line, the row part of cursor addressing is ignored. Since
5657 # tsl expects a parameter (to specify the column), the shortest addressing that
5658 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
5660 dec+sl|DEC VTxx status line,
5662 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
5665 # The following xterm variants don't depend on your base version
5667 # xterm with bold instead of underline
5668 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
5669 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
5671 smso=\E[7m, smul=\E[1m, use=xterm-old,
5673 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
5674 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
5675 ich@, ich1@, use=xterm,
5676 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
5677 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
5678 rmcup@, smcup@, use=xterm,
5681 # The xterm mouse protocol is used by other terminal emulators.
5682 # In this section, two extended capabilities are used to illustrate the mouse
5683 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
5684 # enabling/disabling other mouse protocols. The "xm" capability describes the
5685 # mouse response; currently there is no interpreter which would use this
5686 # information to make the mouse support completely data-driven.
5688 # Here is the "original" xterm mouse protocol.
5690 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
5691 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
5692 # sequence", referring to the fact that it does not correspond to a "real"
5693 # terminal. The mouse responses for the X10 protocol are sent only for
5695 xterm+x10mouse|X10 xterm mouse protocol,
5696 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
5697 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
5698 xterm-x10mouse|X10 xterm mouse,
5699 use=xterm+x10mouse, use=xterm,
5701 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
5704 # The mouse responses for the X11 protocol covered button releases, as well as
5707 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
5710 # The modifiers are not reflected in this description because as used in xterm
5711 # they are normally inaccessible because the translations resources assign
5712 # shift and control to other features. However, they are important because
5713 # they take up space in the first byte of the response. The other bits of this
5714 # byte are used to encode the button number for both presses and releases.
5715 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
5716 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
5717 # provide additional features, e.g., wheel mouse.
5719 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
5720 # "t" or "T", which was activated by double-clicking. The "t" response was
5721 # used when the starting/ending positions were the same.
5723 # X11R3 (February 1988) added the highlight/tracking mode.
5725 # X11R4 (December 1989) added the control sequences document, listing the
5726 # control sequences for the X10/X11 protocols without descriptions. It also
5727 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
5728 # X11 protocol as "DEC VT200 compatible", although DEC offered no such terminal.
5730 # X11R5 (November 1993) gave a description of the mouse protocol.
5732 # X11R6 (January 1995) moved the control sequences document out of the xterm
5733 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
5734 # no new information.
5735 xterm+x11mouse|X11 xterm mouse protocol,
5736 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
5737 xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c,
5738 xterm-x11mouse|X11 mouse,
5739 use=xterm+x11mouse, use=xterm,
5741 # Here is a suggested description of the xterm highlighting protocol.
5742 # A more complicated example could be constructed to account for the "t"
5744 xterm+x11hilite|X11 xterm mouse protocol with highlight,
5745 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
5746 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
5748 xterm-x11hilite|X11 mouse with highlight,
5749 use=xterm+x11mouse, use=xterm,
5751 # The preceding were the sources from X Consortium. Other sources (or patches)
5752 # were available. Starting in mid-1995, XFree86 developers collected some of
5753 # those changes and began improvements, e.g., to support color. This was, by
5754 # the way, around the same time that rxvt developers began implementing color,
5755 # though dates (and attributions) are not well documented. I became interested
5756 # in xterm in late 1995, and involved in early 1996. To complete the picture,
5757 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
5759 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
5760 # "any-event" mouse mode.
5762 # These building blocks incorporate later features as well:
5763 # xterm patch #224 (2007/2/11 added private mode 1004, for enabling/disabling
5764 # focus in/out event reporting.
5765 # xterm patch #277 (2012/01/07 added private mode 1006
5767 xterm+sm+1002|xterm any-button mouse,
5768 kmous=\E[<, XM=\E[?1006;1004;1002%?%p1%{1}%=%th%el%;,
5769 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5771 xterm-1002|example of xterm any-button mouse,
5772 use=xterm+sm+1002, use=xterm,
5774 xterm+sm+1003|xterm any-event mouse,
5775 XM=\E[?1006;1004;1003%?%p1%{1}%=%th%el%;,
5777 xterm-1003|example of xterm any-event mouse,
5778 use=xterm+sm+1003, use=xterm,
5780 xterm+focus|xterm focus-in/out event "keys",
5781 kxIN=\E[I, kxOUT=\E[O,
5783 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5786 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5787 # dropping support for the X11 mouse protocol's shift-modifier and using
5788 # available bits in the first byte of the response to encode buttons 4 and 5.
5789 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5790 # older configurations which might have used the obsolete modifiers.
5792 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5793 # where the coordinates in the mouse response would be encoded in UTF-8,
5794 # thereby extending the range of coordinates past 222=(255-33). This is the
5795 # "1005" mouse mode.
5796 xterm+sm+1005|xterm UTF-8 mouse (building block),
5797 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5798 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5799 xterm-1005|xterm UTF-8 mouse,
5800 use=xterm+sm+1005, use=xterm,
5802 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5803 # SGR-style parameters.
5805 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5806 # (By the way, this is a problem with the X11 protocol). A more plausible
5807 # criticism is that the responses provided by the 1005 mode are not distinct
5808 # from the non-1005 responses.
5810 # As an alternative (and fixing the longstanding limitation of X11 mouse
5811 # protocol regarding button-releases), I provided the 1006 mode, referring
5812 # to it as "SGR 1006" since the replies resemble the SGR control string:
5813 xterm+sm+1006|xterm SGR-mouse (building block),
5814 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5815 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5816 xterm-1006|xterm SGR-mouse,
5817 use=xterm+sm+1006, use=xterm,
5820 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5821 # (kterm should not invoke DEC Graphics as the alternate character set
5822 # -- Kenji Rikitake)
5823 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5824 # -- MATSUMOTO Shoji)
5825 # kterm implements acsc via built-in table of X Drawable's
5826 kterm|kterm kanji terminal emulator (X window system),
5829 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5830 csr=\E[%i%p1%d;%p2%dr, enacs=, kmous=\E[M, rc=\E8,
5831 rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5832 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5834 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, use=x10term+sl,
5835 use=xterm-r6, use=ecma+color,
5836 kterm-color|kterm-co|kterm with ANSI colors,
5837 ncv@, use=kterm, use=ecma+color,
5841 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5842 # variant of xterm which is apparently no longer supported, but are interesting
5843 # because they illustrate SVr4 curses mouse controls - T.Dickey
5844 xtermm|xterm terminal emulator (monochrome),
5845 OTbs, am, km, mir, msgr, xenl,
5846 btns#3, cols#80, it#8, lines#24,
5847 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5848 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5849 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5850 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5851 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5852 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5853 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5854 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5855 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5856 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5857 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5858 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5859 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5860 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5861 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5862 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5863 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5864 %;m%?%p9%t\016%e\017%;,
5865 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5866 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5868 xtermc|xterm terminal emulator (color),
5869 colors#8, ncv#7, pairs#64,
5870 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5871 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5873 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5877 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5878 # Here's a termcap entry I've been using for xterm_color, which comes
5879 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5880 # color stuff, I also have a status line defined as the window manager
5881 # title bar. [I have translated it to terminfo -- ESR]
5882 xterm-pcolor|xterm with color used for highlights and status line,
5884 bold=\E[1;43m, rev=\E[7;34m,
5885 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5886 %t;7;31%;%?%p3%t;7;34%;m,
5887 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5889 # This describes the capabilities of color_xterm, an xterm variant from
5890 # before ECMA-64 color support was folded into the main-line xterm release.
5891 # This entry is straight from color_xterm's maintainer.
5892 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5893 # The README's with the distribution also say that it supports SGR 21, 24, 25
5894 # and 27, but they are not present in the terminfo or termcap.
5895 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5896 OTbs, am, km, mir, msgr, xenl, XT,
5897 cols#80, it#8, lines#65, ncv@,
5898 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5899 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5900 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5901 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5902 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5903 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5904 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5905 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5906 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5907 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5908 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5909 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5910 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5911 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5912 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5913 rmso=\E[27m, rmul=\E[24m,
5914 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5916 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5917 %;m%?%p9%t\016%e\017%;,
5918 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5919 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5920 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5922 # The IRAF source has a terminfo using "xterm-r5", but line-drawing does not
5923 # work in that case. This entry uses xterm+acs, to work around that problem.
5925 # Home/end keys do not work, due to a bug in the X Consortium xterm on which
5928 # https://invisible-island.net/xterm/xterm.faq.html#bug_xterm_r6
5930 # Comparing to the X11R5 source, xgterm has dynamic and ANSI colors (probably
5931 # not bce). It interchanges mouse buttons 2/3 for menus.
5933 # It also has a few features found in later versions of xterm:
5934 # - vi-button and dired-button,
5935 # - i18n stuff like X11R6.
5936 # - colorBD, colorUL
5939 # Debian provides a package for xgterm (and iraf). Although the source for
5940 # xgterm implements the control-sequences for ANSI color, the packaged xgterm
5941 # does nothing with those, even after installing the app-defaults file which
5942 # was overlooked by the Debian packager.
5943 xgterm|graphic terminal for IRAF,
5944 use=xterm+acs, use=xterm-r5, use=xterm+keypad,
5946 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5947 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5948 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5949 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5950 # that each of those implements the home, end, delete keys differently.
5952 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5953 # colors; note that this is not compatible with the 5.2 version.
5954 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5955 # match XFree86's xterm.terminfo usage and prevent circular links
5956 xterm-color|nxterm|generic color xterm,
5958 op=\E[m, use=xterm-r6, use=klone+color,
5960 # This entry describes an xterm with Sun-style function keys enabled
5961 # via the X resource setting "xterm*sunFunctionKeys:true"
5962 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5963 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5964 # because we want it to be seen as <kcpy>.
5965 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5966 # with their Sun keyboard labels instead.
5967 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5968 xterm-sun|xterm with sunFunctionKeys true,
5969 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5970 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5971 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5972 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5973 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5974 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5975 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5976 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5977 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5978 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5979 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5980 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5981 use=xterm+nofkeys, use=xterm+nopcfkeys,
5982 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5983 cols#80, lines#24, use=xterm-sun,
5986 # this describes the alpha-version of GNOME terminal shipped with Redhat 6.0
5987 gnome-rh62|GNOME terminal,
5989 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5992 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5994 # This implements a subset of VT102 with a random selection of features from
5995 # other terminals such as color and function-keys.
5997 # shift-f1 to shift-f10 are f11 to f20
5999 # NumLock changes the application keypad to approximate VT100 keypad, except
6000 # that there is no escape sequence matching comma (,).
6002 # Other defects observed:
6003 # vt100 LNM mode is not implemented.
6004 # vt100 80/132 column mode is not implemented.
6005 # vt100 DECALN is not implemented.
6006 # vt100 DECSCNM mode is not implemented, so flash does not work.
6007 # vt100 TBC (tab reset) is not implemented.
6008 # xterm alternate screen controls do not restore cursor position properly
6009 # it hangs in tack after running function-keys test.
6010 gnome-rh72|GNOME Terminal in RedHat 7,
6012 kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6014 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
6016 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis,
6019 # GNOME Terminal 2.0.1 (Redhat 8.0)
6021 # Documentation now claims it implements VT220 (which is demonstrably false).
6022 # However, it does implement ECH, which is a VT220 feature. And there are
6023 # workable VT100 LNM, DECALN, DECSNM modes, making it possible to display
6024 # more of its bugs using vttest.
6026 # However, note that bce and msgr are broken in this release. Tabs (tbc and
6027 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
6029 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
6030 # operations. Shift-tab generates a distinct sequence so it can be argued
6031 # that it implements kcbt.
6032 gnome-rh80|GNOME Terminal in RedHat 8,
6034 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
6035 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
6037 # GNOME Terminal 2.2.1 (Redhat 9.0)
6039 # bce and msgr are repaired.
6040 gnome-rh90|GNOME Terminal in RedHat 9,
6042 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
6043 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
6044 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
6047 # GNOME Terminal 2.14.2 (Fedora Core 5)
6048 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
6049 gnome-fc5|GNOME Terminal in Fedora Core 5,
6051 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
6053 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
6055 # GNOME Terminal 2.18.1 (2007 snapshot)
6057 # For any "recent" version of gnome-terminal, it is futile to attempt to
6058 # support modifiers on cursor- and keypad keys because the program usually
6059 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
6060 # of the keys (which more/less correspond to the termcap values), and will
6061 # interpret those according to the $TERM value, but others not in the
6062 # terminfo according to some constantly changing set of hacker guidelines -TD
6063 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
6064 use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5,
6065 gnome-2007|GNOME Terminal snapshot 2.18.1,
6068 # GNOME Terminal 2.22.3 (2008 snapshot)
6070 # In vttest, it claims to be a VT220 with national replacement character-sets,
6071 # but aside from the identifier string, implements only a small fraction of
6072 # VT220's behavior, which will make it less usable on a VMS system (unclear
6073 # what the intent of the developer is, since the NRC feature exposed in vttest
6074 # by this change does not work).
6075 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
6076 use=vte+pcfkeys, use=vte-2007,
6077 gnome-2008|GNOME Terminal snapshot 2.22.3,
6080 # GNOME Terminal 3.6.0 (2012)
6081 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
6082 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
6085 # Testing with tack shows that flash does not/has not worked -TD
6086 vte-2012|VTE 0.34.1,
6088 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
6089 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
6090 %|%t;7%;m%?%p9%t\016%e\017%;,
6091 use=ecma+italics, use=vte-2008,
6092 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
6093 # 61 differences from a correct entry for gnome terminal.
6094 gnome-2012|GNOME Terminal 3.6.0,
6097 # Before 2008, GNOME terminal could automatically use the contents of the
6098 # "xterm" terminfo to supply key information which is not built into the
6099 # program. With 2.22.3, this list was built into the program (which addressed
6100 # the inadvertent use of random terminfo data, though using a set of values
6101 # which did not correspond to any that xterm produced - still not solving the
6102 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
6104 # terminfo modifier code keys
6105 # kf13-kf24 shift 2 F1 to F12
6106 # kf25-kf36 control 5 F1 to F12
6107 # kf37-kf48 shift/control 6 F1 to F12
6108 # kf49-kf60 alt 3 F1 to F12
6109 # kf61-kf63 shift-alt 4 F1 to F3
6111 # The parameters with \EO (SS3) are technically an error, since SS3 should have
6112 # no parameters. This appears to be rote copying based on xterm+pcc0.
6113 vte+pcfkeys|VTE's variation on xterm+pcfkeys (building block),
6114 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
6115 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
6116 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
6117 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
6118 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
6119 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
6121 gnome+pcfkeys|GHOME Terminal's variation on xterm+pcfkeys (building block),
6124 # deprecated - use "vte" for newer versions
6125 gnome|GNOME Terminal,
6127 gnome-256color|GNOME Terminal with xterm 256-colors,
6128 use=xterm+256color, use=gnome,
6130 # relevant changes were made in January 2014, and later.
6132 # Originally VTE was promoted as a library able to emulate any terminal by
6133 # reading its terminal description. In practice, that never got beyond the
6134 # ability to read definitions of special keys (function-, editing-, cursor).
6136 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
6137 # of a termcap file derived from xterm). That was incomplete because it did
6138 # not have any of the modifier-key information used for xterm's function-,
6139 # editing-, and cursor-keys. Having its own reader was unnecessary since
6140 # ncurses provides that information; used since xterm patch #225 in 2007.
6142 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
6143 # gnome #730137) dealt with attempts to recast that termcap reader as library
6144 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
6145 # abandoning that and finally constructing a table to match xterm's default
6146 # behavior, e.g., for "xterm+pcfkeys".
6147 vte-2014|VTE 0.35.1,
6149 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
6150 ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
6151 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
6153 # As of January 2018, this was the most recent release,
6154 # e.g., with gnome-terminal 3.26.2
6155 vte-2017|VTE 0.50.2,
6156 use=ecma+strikeout, use=vte-2014,
6158 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
6159 # late in 2017 for changing the appearance of underlines, which was
6160 # incorporated into Debian and Fedora testing-packages in February and March
6161 # 2018, respectively. Overline (Smol/Rmol) has been supported since December
6163 vte-2018|VTE 0.51.2,
6165 blink=\E[5m, enacs=\E(B\E)0, nel=\EE,
6166 rep=%p1%c\E[%p2%{1}%-%db,
6167 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;
6168 8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
6169 Rmol=\E[55m, Se=\E[1 q, Smol=\E[53m, Smulx=\E[4:%p1%dm,
6170 use=xterm+alt+title, use=xterm+tmux, use=kitty+setal,
6173 # Summarizing as of March 2022, these terminfo-capabilities of xterm are
6175 # - DEC application keypad mode
6176 # - DEC-compatible status-line
6177 # - DEC left/right margin support
6178 # - DEC printer controls
6179 # - AT&T cursor-blinking
6180 # - meta mode, as documented in terminfo(5)
6181 # - xterm's extension to clear scrollback
6182 vte|VTE aka GNOME Terminal,
6185 vte-256color|VTE with xterm 256-colors,
6186 use=xterm+256color, use=vte,
6188 # XFCE Terminal 0.2.5.4beta2
6190 # This is based on some of the same source code, e.g., the VTE library, as
6191 # gnome-terminal, but has fewer features, fails more screens in vttest.
6192 # Since most of the terminfo-related behavior is due to the VTE library,
6193 # the terminfo is the same as gnome-terminal.
6201 # A terminal written in JavaScript, which can provide xterm-like terminal
6202 # emulation in a browser such as Google Chrome, or in Chome OS.
6204 # https://chromium.googlesource.com/apps/libapps/+/master/nassh/doc/FAQ.md
6206 # Tested with Secure Shell App version 0.39 in Chrome 89.0.4389.90, found that
6207 # the numeric keypad escapes are missing -TD
6208 hterm|Chromium hterm,
6211 kcbt=\E[Z, kent=\EOM, nel=\EE, use=xterm+osc104,
6212 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
6213 use=vt420+lrmm, use=xterm+sm+1006, use=xterm+tmux,
6214 use=ecma+italics, use=xterm+pcfkeys, use=xterm-basic,
6215 hterm-256color|Chromium hterm with xterm 256-colors,
6216 use=xterm+256color2, use=hterm,
6220 # https://github.com/thestinger/termite
6222 # A review requires install of Arch Linux since Fedora and Debian don't have
6223 # this program. It uses "vte3-ng" (a conflicting package), which is here:
6224 # https://github.com/thestinger/vte-ng
6225 # which (based on the default branch setting) seems to be a fork of vte
6226 # 0.48.2, and is noted as such in Arch:
6227 # https://aur.archlinux.org/packages/vte3-ng/
6228 # It won't be merged:
6229 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
6230 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
6231 # but perhaps made obsolete.
6233 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
6234 # was mostly cut/paste from xterm-256color, but since VTE does not actually
6235 # implement several of the features in that terminal description, this one is
6236 # trimmed to eliminate those. Also, since it is a slightly older version of
6237 # VTE, it lacks a few more features (again, trimmed).
6238 termite|VTE-based terminal,
6239 am, ccc, km, mir, msgr, npc, xenl,
6240 cols#80, it#8, lines#24, ncv@,
6241 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6243 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
6244 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6245 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6246 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6247 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6248 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
6249 ht=^I, hts=\EH, ind=\n, invis=\E[8m,
6250 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
6251 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6252 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
6253 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
6254 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6256 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
6257 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6258 use=xterm+alt1049, use=ecma+index, use=ansi+idc,
6259 use=ansi+idl, use=ansi+enq, use=ecma+italics,
6260 use=xterm+256color, use=ecma+color, use=vt220+cvis,
6261 use=xterm+pcfkeys, use=xterm+sl-twm,
6264 # Multi-GNOME-Terminal 1.6.2
6266 # This does not use VTE, and does have different behavior (compare xfce and
6268 mgt|Multi GNOME Terminal,
6269 use=ecma+index, use=xterm-xf86-v333,
6272 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
6273 # or not is debatable).
6276 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
6278 # Konsole 1.0.1 (2001/11/25)
6279 # (formerly known as kvt)
6281 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
6282 # simplify this entry (and point out why konsole isn't xterm), we base this on
6283 # xterm-r6. The default keyboard appears to be 'linux'.
6286 # a) konsole implements several features from XFree86 xterm, though none of
6287 # that is documented - except of course in its source code - apparently
6288 # because its implementors are unaccustomed to reading documentation - as
6289 # evidenced by the sparse and poorly edited documentation distributed with
6290 # konsole. Some features such as the 1049 private mode are recognized but
6291 # incorrectly implemented as a duplicate of the 47 private mode.
6292 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
6293 # sends PC-style escapes rather than VT100.
6294 # c) fails vttest menu 3 (Test of character sets) because it does not properly
6295 # parse some control sequences. Also fails vttest Primary Device Attributes
6296 # by sending a bogus code (in the source it says it's supposed to be a
6297 # VT220, which is doubly incorrect because it does not implement VT220
6298 # control sequences except for a few special cases). Treat it as a
6299 # mildly-broken VT102.
6301 # Update for konsole 1.3.2:
6302 # The 1049 private mode works (but see the other xterm screens in vttest).
6303 # Primary Device Attributes now returns the code for a VT100 with advanced
6304 # video option. Perhaps that's intended to be a "mildly-broken Vt102".
6306 # Updated for konsole 1.6.4:
6307 # add konsole-solaris
6309 # Updated for konsole 1.6.6:
6310 # add control-key modifiers for function-keys, etc.
6312 # Updated for konsole 2.3 (October 2008):
6313 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
6314 # different from xterm (and VT100's). They have the same behavior in
6315 # this detail, but it is unclear which copies the other.
6317 # Deferred update for konsole 2.10 (late 2012):
6318 # add SGR 1006 mouse
6320 # Updated for konsole 2.12.4 (late 2013):
6323 # Updated for konsole 16.07 (mid 2016):
6324 # add dim, invis, strikeout
6325 # (also overline, which is too rarely used to provide as an extension)
6327 # Updated for konsole 17.12.0 (late 2017):
6329 # Re-enable "bel", since it is latent in the source-code even though KDE config
6330 # often hides the feature (2020/5/30)
6331 konsole-base|KDE console window (base),
6334 blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX,
6335 flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG,
6336 invis=\E[8m, kbs=^?, kdch1=\E[3~, kend=\E[4~, kf1@, kf10@,
6337 kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@,
6338 kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~,
6339 kslt@, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6340 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
6341 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6342 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6343 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
6344 use=ecma+index, use=xterm+sm+1006, use=ecma+strikeout,
6345 use=ecma+italics, use=ecma+color, use=xterm-r6,
6348 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
6349 # "vt100" key-table files along with a compiled-in default key-table.
6351 # The main difference between the two keytabs was that the developer equated
6352 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
6353 # that. For the same reason, the home/end keys differ. A VT100 had none of
6354 # that. The otherwise identical keytabs have definitions to model the VT52
6355 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
6357 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
6358 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
6359 # dropped from the install in June 2008.
6361 # The default keytab added in January 2000 was originally titled "X11 R6",
6362 # and likewise retitled to "XFree 4".
6364 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
6365 # and changing backspace to ^H, removing that keytab's attempt to model the
6366 # VT100 keypad and VT52 (KDE #20459).
6368 # The developers made changes to the default and linux keytabs. Comparing
6369 # the original and 2018 versions using diffstat:
6370 # default: 119 added, 147 deleted, 28 unchanged
6371 # linux: 47 added, 28 deleted, 104 unchanged
6373 # Most of the change for the default keytab was to make konsole act more like
6374 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
6375 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
6376 # made an external file (like "linux" and "solaris"), and some further
6377 # refinement made. But there are still flaws in the scheme.
6379 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
6380 # Shift into a placeholder in the table entries. That works well if all of the
6381 # modified keys are modified in the same way. But xterm does not do that. The
6382 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
6383 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
6384 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
6385 # kf14: '\E[1;2Q', '\EO2Q'.
6387 # In effect, a quarter of konsole's function-keys are different from xterm.
6389 # It is not a simple blunder:
6390 # a) xterm patch #121 (November 1999), providing the first version of the
6391 # PC-style modifiers would send \EO2Q
6392 # b) xterm patch #216 (July 2006) amended this and other details, provided
6393 # better documentation for the modifiers and made the behavior configurable,
6394 # e.g., using the modifyFunctionKeys resource. The reason why it sends
6395 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
6396 # changelog points this out as "avoid sending SS3 with parameters".
6397 # c) That came after AnyMod was introduced, but still early enough that one
6398 # might expect konsole's developers to followup. Twelve years later that
6399 # has yet to happen.
6401 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
6403 konsole-linux|KDE console window with Linux keyboard,
6404 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
6405 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
6406 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6407 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
6408 konsole-solaris|KDE console window with Solaris keyboard,
6409 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6411 # Obsolete: x11r5.keymap
6412 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
6413 # terminfo at the time rather than testing the code.
6414 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
6415 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6417 # The value for kbs (see konsole-vt100) reflects local customization rather
6418 # than the settings used for XFree86 xterm.
6419 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
6420 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
6423 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
6424 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
6427 # Obsolete: vt100.keymap
6428 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
6429 # it is still useful for deriving the other entries, since the developer
6430 # provided function-keys based on xterm.
6431 konsole-vt100|KDE console window with VT100 (sic) keyboard,
6432 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
6433 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
6434 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
6435 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6436 khome=\E[H, use=konsole-base,
6438 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
6439 # September 2008 and removed in June 2016. The developer who removed it stated
6440 # that it was never installed.
6441 konsole-vt420pc|KDE console window with VT420 PC keyboard,
6442 kbs=^H, kdch1=^?, use=konsole-vt100,
6444 # make a default entry for konsole
6445 konsole|KDE console window,
6448 # These were written for ncurses:
6449 konsole-16color|klone of xterm-16color,
6450 ncv#32, use=ibm+16color, use=konsole,
6451 konsole-256color|KDE console window with xterm 256-colors,
6452 use=xterm+256setaf, use=konsole,
6455 # https://github.com/arakiken/mlterm
6457 mlterm|multi lingual terminal emulator,
6460 # Tested mlterm 3.9.0 (2020/09/19):
6462 # - has blinking text
6464 # - has invisible-text
6466 # - has crossed-out text
6467 # - does not support palette reset with OSC 104
6468 # - testing the function-keys is difficult because the terminal is
6469 # preconfigured to set many of the modified keys to special functions, e.g.,
6470 # - shift-F1 and shift-F2 are bound to a split-screen feature
6471 # - control-F1 and control-F2 is bound to a new-terminal feature
6473 # - primary response says it is a VT340 (ReGIS and Sixel).
6474 # - has partial support for double-size characters.
6475 # - character-set tests do not work.
6476 # - DEC locator works.
6477 # - 1006-mouse works.
6478 # - focus-events do not work reliably.
6479 # - numeric keypad escapes do not work.
6480 # - back-color erase works
6482 # - title-stack works.
6483 # - doesn't respond to 8-bit controls.
6484 # - 256-color palette initializing works.
6485 # - DECSTR soft-reset is documented.
6487 # Tested mlterm 3.3.8 (2018/01/21):
6488 # found xterm+sm+1006 did not work with version 3.3.8
6489 # soft-reset DECSTR is in sources since 2017/09/19.
6491 # Tested mlterm 3.2.2 (2014/03/22):
6492 # mlterm 3.x made further changes, but they were not reflected in the included
6493 # mlterm.ti (which was dropped in 2015). This entry has been based on testing
6494 # with ncurses, tack and vttest -TD
6495 mlterm3|multi lingual terminal emulator 3.x,
6497 blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
6498 is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
6499 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%?
6500 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
6501 use=ansi+enq, use=ansi+rep, use=ecma+italics,
6502 use=ecma+strikeout, use=xterm+app, use=xterm+pcf2,
6503 use=xterm+pcc2, use=xterm+pce2, use=xterm+meta,
6504 use=xterm+alt+title, use=xterm+sm+1006,
6505 use=vt100+pfkeys, use=mlterm2,
6507 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
6509 # It is nominally a VT102 emulator, with features borrowed from rxvt and
6512 # The function keys are numbered based on shift/control/alt modifiers, except
6513 # that the control-modifier itself is used to spawn a new copy of mlterm (the
6514 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
6515 # how it is configured.
6517 # kf1 to kf12 \E[11~ to \E[24~
6518 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
6519 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
6520 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
6521 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
6522 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
6523 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
6524 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
6526 mlterm2|multi lingual terminal emulator 2.x,
6527 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
6528 colors#8, cols#80, it#8, lines#24, pairs#64,
6529 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6530 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
6531 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6532 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6533 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6534 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6535 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
6536 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6537 il=\E[%p1%dL, il1=\E[L, ind=\n,
6538 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
6539 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6540 kend=\EOF, kent=\EOM, khome=\EOH, kind=\EO1;2B, kmous=\E[M,
6541 kri=\EO1;2A, mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8,
6542 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
6543 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6544 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
6545 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6546 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
6548 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
6549 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6550 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
6551 vpa=\E[%i%p1%dd, use=vt220+vtedit, use=xterm+alt1049,
6552 use=ecma+index, use=mlterm+pcfkeys, use=vt220+cvis,
6555 # The insert/delete/home/end keys do not respond to modifiers because mlterm
6556 # looks in its termcap to decide which string to send. If it used terminfo
6557 # (when available), it could use the extended names introduced for xterm.
6558 mlterm+pcfkeys|mlterm fragment for PC-style fkeys,
6559 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
6560 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
6561 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
6562 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
6563 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
6564 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
6565 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
6566 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
6567 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
6569 mlterm-256color|mlterm 3.0 with xterm 256-colors,
6570 use=xterm+256color, use=mlterm,
6573 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
6574 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
6577 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
6578 # but some applications don't work with that.
6579 # It also has an AIX extension
6583 # but the latter does not work correctly.
6585 # The distributed terminfo says it implements hpa and vpa, but they are not
6586 # implemented correctly, using relative rather than absolute positioning.
6588 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
6589 # Since rxvt is not really compatible with xterm, it should be configured as
6590 # "rxvt" or "rxvt-color".
6592 # removed dch/dch1 because they are inconsistent with bce/ech -TD
6593 # remove km as per tack test -TD
6594 rxvt-basic|rxvt terminal base (X Window System),
6595 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
6596 cols#80, it#8, lines#24,
6597 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6598 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6599 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6600 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6601 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6602 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6603 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
6604 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6605 ind=\n, is1=\E[?47l\E=\E[?1l,
6606 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6607 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6608 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
6610 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6611 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6613 s0ds=\E(B, s1ds=\E(0, sc=\E7,
6614 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6616 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
6617 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
6618 use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
6619 # Key Codes from rxvt reference:
6621 # Note: Shift + F1-F10 generates F11-F20
6623 # For the keypad, use Shift to temporarily override Application-Keypad
6624 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
6625 # is off, escape sequences toggle Application-Keypad setting.
6626 # Also note that values of Home, End, Delete may have been compiled
6627 # differently on your system.
6629 # Normal Shift Control Ctrl+Shift
6630 # Tab ^I ESC [ Z ^I ESC [ Z
6631 # BackSpace ^H ^? ^? ^?
6632 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
6633 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
6634 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6635 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
6636 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
6637 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
6638 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
6639 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
6640 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6641 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
6642 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
6643 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
6644 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
6645 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
6646 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
6647 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
6648 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
6649 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
6650 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
6651 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
6652 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
6653 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
6654 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
6655 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
6656 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
6657 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
6658 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
6659 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
6660 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
6663 # Up ESC [ A ESC [ a ESC O a ESC O A
6664 # Down ESC [ B ESC [ b ESC O b ESC O B
6665 # Right ESC [ C ESC [ c ESC O c ESC O C
6666 # Left ESC [ D ESC [ d ESC O d ESC O D
6667 # KP_Enter ^M ESC O M
6668 # KP_F1 ESC O P ESC O P
6669 # KP_F2 ESC O Q ESC O Q
6670 # KP_F3 ESC O R ESC O R
6671 # KP_F4 ESC O S ESC O S
6672 # XK_KP_Multiply * ESC O j
6673 # XK_KP_Add + ESC O k
6674 # XK_KP_Separator , ESC O l
6675 # XK_KP_Subtract - ESC O m
6676 # XK_KP_Decimal . ESC O n
6677 # XK_KP_Divide / ESC O o
6689 # The source-code for rxvt actually defines mappings for F21-F35, using
6690 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
6691 # are rare, so this entry uses the shift- and control-modifiers as in
6692 # xterm+pcfkeys to define keys past F12.
6694 # kIC is normally not used, since rxvt performs a paste for that (shifted
6695 # insert), unless private mode 35 is set.
6697 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
6698 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
6699 rxvt+pcfkeys|rxvt fragment for PC-style fkeys,
6700 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6701 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
6702 kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
6703 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6704 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6705 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6706 kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^,
6707 kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^,
6708 kf29=\E[18\^, kf3=\E[13~, kf30=\E[19\^, kf31=\E[20\^,
6709 kf32=\E[21\^, kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^,
6710 kf36=\E[26\^, kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^,
6711 kf4=\E[14~, kf40=\E[32\^, kf41=\E[33\^, kf42=\E[34\^,
6712 kf43=\E[23@, kf44=\E[24@, kf5=\E[15~, kf6=\E[17~,
6713 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kind=\E[a,
6714 kri=\E[b, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
6715 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
6716 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
6717 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
6718 kUP=\E[a, kUP5=\EOa, use=vt220+vtedit,
6720 # rxvt was originally "xvt", first announced in April 1993:
6721 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
6722 #------------------------------------------------------------------------------
6723 # Article: 567 of comp.os.linux.announce
6724 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
6725 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
6726 # From: nation@rocket.sanders.com (Robert Nation)
6727 # Newsgroups: comp.os.linux.announce
6728 # Subject: xvt upload
6729 # Date: 16 Apr 1993 18:13:07 GMT
6730 # Organization: Cornell Theory Center
6732 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
6733 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
6734 # NNTP-Posting-Host: theory.tc.cornell.edu
6735 # Keywords: xvt, xterm, Xwindows
6736 # Originator: mdw@theory.TC.Cornell.EDU
6738 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
6739 # rxvt.README on sunsite.unc.edu.
6741 # Xvt is an xterm replacement which uses a little less memory, and is
6742 # suitable for use on machines with small memories. Tek4010 support
6745 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
6746 # to make it a little more compact, and to add and remove certain features.
6750 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
6751 #------------------------------------------------------------------------------
6753 # Though its change-log does not mention this, John Davis has stated that he
6754 # was the author of the changes to use the bce ("new color model") which was
6755 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
6756 # dates, nor give developer's names. Initial color support was added for rxvt
6757 # "2.0", which was sometime in 1994.
6759 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
6760 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
6762 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
6763 # was from one of my bug-reports -TD
6765 # While the color model both for xterm and rxvt was based on Linux console,
6766 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
6767 # behavior: inserting/deleting characters does not fill the newly empty cell
6768 # with the default background color.
6769 rxvt|rxvt-color|rxvt terminal emulator (X Window System),
6771 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
6772 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
6773 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
6774 use=xterm+256color, use=rxvt,
6775 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
6776 use=xterm+88color, use=rxvt,
6777 rxvt-xpm|rxvt terminal emulator (X Window System with xpm),
6779 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
6780 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6781 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6782 \302x\263y\363z\362{\343|\330}\234~\376,
6784 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
6785 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6786 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6787 \302x\263y\363z\362{\343|\330~\376,
6790 # This variant is supposed to work with rxvt 2.7.7 when compiled with
6791 # NO_BRIGHTCOLOR defined. rxvt needs more work...
6792 rxvt-16color|rxvt with 16 colors like aixterm,
6793 ncv#32, use=ibm+16color, use=rxvt,
6798 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
6799 # makes its function-keys different from other flavors of rxvt -TD
6801 # Testing with tack:
6802 # + made custom description (below) to work, though it sets TERM=xterm.
6804 # Testing with vttest:
6805 # + While "based on" rxvt, some of the basic functionality is broken. The
6806 # window collapses to a single line when running several of the screens
6807 # in vttest, e.g., the tests for cursor movement, screen features,
6808 # double-sized characters.
6809 # + The VT52 test works properly, but this is an exception. Due to the
6810 # other bug(s) most of vttest is untestable.
6811 # + the color test using ECH shows a gap in the bce model, like rxvt.
6813 # Testing with xterm "vttest" scripts:
6814 # + resize.pl does not work because mrxvt does implement CSI 18 t
6815 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
6816 # + none of the "dynamic colors" (OSC colors) scripts work.
6817 mrxvt|multitabbed rxvt,
6819 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
6820 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
6821 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
6822 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
6823 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
6824 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
6827 mrxvt-256color|multitabbed rxvt with 256 colors,
6828 use=xterm+256color, use=mrxvt,
6831 # From: Michael Jennings <mej@valinux.com>
6835 # removed kf0 which conflicts with kf10 -TD
6836 # remove cvvis which conflicts with cnorm -TD
6837 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
6838 # but does otherwise follow the rxvt+pcfkeys model -TD
6839 # remove nonworking flash -TD
6840 # remove km as per tack test -TD
6841 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
6842 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
6843 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
6844 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6845 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6846 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6847 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6848 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6849 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6850 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
6851 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6852 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
6853 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
6854 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
6855 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
6856 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6857 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
6858 rmso=\E[27m, rmul=\E[24m,
6859 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6860 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6863 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6864 %;m%?%p9%t\016%e\017%;,
6865 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
6866 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6867 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
6868 use=ecma+color, use=vt220+cvis,
6870 Eterm-256color|Eterm with xterm 256-colors,
6871 use=xterm+256color, use=Eterm,
6873 Eterm-88color|Eterm with 88 colors,
6874 use=xterm+88color, use=Eterm,
6877 # Based on rxvt 2.4.8, it has a few differences in key bindings
6878 aterm|AfterStep terminal,
6880 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
6884 # This is not based on xterm's source...
6885 # vttest shows several problems with keyboard, cursor-movements.
6886 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6887 xiterm|internationalized terminal emulator for X,
6889 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
6893 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6894 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6895 # chars look like --esr)
6896 hpterm|X-hpterm|HP X11 terminal emulator (old),
6897 am, da, db, mir, xhp, xon,
6898 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6899 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6900 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6901 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6902 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6903 kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
6904 khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, krmir=\ER,
6905 ktbc=\E3, meml=\El, memu=\Em,
6906 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6907 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6908 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6909 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6910 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6912 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6913 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6914 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6915 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6916 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
6917 # HPUX 11 provides a color version.
6918 hpterm-color|HP X11 terminal emulator with color,
6922 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6923 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6925 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90081_198611_Facilities_for_Series_200_300_and_500.pdf
6926 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1987/97089-90081_198709_Facilities_for_Series_200_300_and_500_HP-UX_Concepts_and_Tutorials.pdf
6928 # This article does not cover the HP 46020A keyboard that is used by the Model
6929 # 217 and 237 computers. For information on this keyboard read the article,
6930 # "The Series 300 ITE as System Console" found in the manual, HP-UX Concepts
6931 # and Tutorials, Vol. 7.
6934 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90042_198608_HP-UX_Concepts_and_Tutorials.pdf
6936 # HP300_Series_ITE.pdf
6938 # This version, which came from Martin Trusler, was tested with lynx using
6940 hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color (new),
6941 OTbs, am, ccc, da, db, km, mir, xhp,
6942 colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
6944 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
6945 u+v+w+x|y<z>{*|!}\273~\362,
6946 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
6947 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6948 dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6949 home=\E&a0y0C, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6951 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
6952 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
6953 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
6954 %t1%e.%p7%d%;z%p1%dI,
6955 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
6956 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV,
6957 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6958 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
6959 I\E&v1b1c6I\E&v1x1y7I,
6960 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6961 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6962 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6963 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6964 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
6965 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
6967 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%p5%{8}%*%+%{64}%+%c%?
6968 %p9%t%'\016'%c%e%'\017'%c%;,
6969 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
6970 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
6971 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=hp+pfk-cr,
6974 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6975 # It corresponds to emu's internal emulation:
6977 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6978 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6979 # fixes: add civis, cnorm, sgr -TD
6980 emu|emu native mode,
6981 am, bce, mir, msgr, xon,
6982 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6983 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6984 \224t\225u\226v\227w\230x\231~\244,
6985 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6986 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6987 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6988 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6989 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6990 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6991 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6992 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6993 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6994 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6995 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6996 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6997 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6998 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6999 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
7000 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
7002 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
7004 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
7006 # VT220 terminfo entry for the Emu emulation, corresponds to
7008 # with NumLock set (to make the keypad transmit kf0-kf9).
7009 # fixes: add am, xenl, corrected sgr0 -TD
7010 emu-220|Emu-220 (vt200-7bit mode),
7012 cols#80, it#8, lines#24, vt#200,
7013 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
7014 blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r,
7015 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
7016 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
7017 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
7018 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
7019 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
7020 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
7021 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
7022 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7023 kcuu1=\E[A, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl,
7024 kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR,
7025 kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~,
7026 kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~,
7027 kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt,
7028 kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx,
7029 kf9=\EOy, khlp=\E[28~, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O,
7030 rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
7031 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
7032 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
7033 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7034 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
7035 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=vt220+vtedit,
7039 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
7040 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
7041 # indicate that it emulates more than one terminal, but incompletely.
7043 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
7044 # It is based on vt102's entry, with some subtle differences, but also
7046 # supports ANSI colors (except for 'op' string)
7047 # apparently implements alternate screen like xterm
7048 # does not use padding, of course.
7049 mvterm|vv100|SwitchTerm aka mvTERM,
7050 am, km, mir, msgr, xenl, xon,
7051 colors#8, cols#80, it#8, lines#24, pairs#64,
7052 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7053 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7054 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7055 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7056 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7057 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7058 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I,
7059 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
7060 ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7061 kcuu1=\EOA, kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu,
7062 kf7=\EOv, kf8=\EOl, kf9=\EOw, op=\E[100m, rc=\E8, rev=\E[7m,
7063 ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>,
7064 rmso=\E[m, rmul=\E[m,
7065 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
7066 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7067 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
7068 %;m%?%p9%t\016%e\017%;,
7069 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
7070 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7071 use=vt100+fnkeys, use=x10term+sl,
7075 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
7077 # "mterm -type ansi" sets $TERM to "ansi"
7078 mterm-ansi|ANSI emulation,
7081 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7082 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7083 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
7084 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7085 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
7086 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
7087 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
7088 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
7089 is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O,
7090 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
7091 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7092 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7093 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
7094 smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index,
7095 # mterm normally sets $TERM to "mterm"
7096 mterm|mouse-sun|Der Mouse term,
7099 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
7100 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
7101 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
7102 rmir=^O, rmso=^T, smir=^Q, smso=^V,
7103 # "mterm -type decansi" sets $TERM to "decansi"
7105 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
7106 decansi|ANSI emulation with DEC compatibility hacks,
7107 am, mir, msgr, xenl,
7108 colors#8, it#8, pairs#64,
7109 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7110 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7111 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
7112 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7113 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7114 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7115 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
7116 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
7117 il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H,
7118 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
7119 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7120 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7121 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7122 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
7123 kf8=\E[19~, kf9=\E[20~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
7124 ri=\E[T, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
7125 rmso=\E[27m, rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm,
7127 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7128 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7129 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7130 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
7131 u7=\E[6n, vpa=\E[%i%p1%dd, use=vt220+vtedit,
7132 use=ecma+index, use=vt220+cvis,
7135 # http://vwm.sourceforge.net/
7137 # VWM 2.0.2 (2009-05-01)
7138 # vwmterm is a terminal emulator written for the VWM console window manager.
7139 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
7140 vwmterm|VWM terminal,
7141 am, bce, ccc, mir, msgr, npc, xenl, xon,
7143 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7144 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7145 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
7146 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7147 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m,
7148 ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=\n, invis=\E[8m,
7149 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7150 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7151 kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7152 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7153 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
7154 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
7156 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7157 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
7158 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
7159 smul=\E[4m, use=vt220+cvis, use=xterm+alt1049,
7163 # MGR is a Bell Labs window system lighter-weight than X.
7164 # These entries describe MGR's xterm-equivalent.
7165 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
7168 mgr|Bellcore MGR (non X) window system terminal emulation,
7170 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
7171 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
7172 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
7173 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
7174 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
7175 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
7176 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7177 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
7178 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
7180 mgr-sun|Mgr window with Sun keyboard,
7181 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
7182 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
7183 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
7184 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
7185 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
7186 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
7187 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
7188 mgr-linux|Mgr window with Linux keyboard,
7189 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
7190 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
7191 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7192 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7193 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
7198 st|stterm|aka simpleterm,
7203 # there is some problem turning off line-drawing
7204 # shift+control function-keys do nothing; shift+control cursor keys work
7205 # the padding tests make the terminal non-functional.
7208 # SL/SR/REP do not work
7209 # ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
7211 # This entry discards the ccc/initc capabilities from st-0.7 because they
7212 # belong in st-256color.
7213 st-0.8|simpleterm 0.8,
7214 dim=\E[2m, kcbt@, kent@, oc=\E]104\007,
7215 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7216 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7217 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
7218 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
7219 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
7220 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
7221 use=ecma+strikeout, use=st-0.6,
7224 # dim is intermittent, sometimes works, sometimes does not
7225 # italics may show up with yellow color
7226 # has control cursor-keys, alt cursor-keys, still no combinations
7227 # has control pageup/down
7228 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
7229 # Se and Ss are implemented in the source-code, but the terminfo
7230 # provided with the source is incorrect, since Se/Ss are mis-coded
7231 # as booleans rather than strings.
7232 st-0.7|simpleterm 0.7,
7235 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
7236 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
7237 kcbt@, kent@, oc=\E]104\007,
7238 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7239 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7240 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
7241 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
7242 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
7243 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
7244 use=ecma+strikeout, use=st-0.6,
7248 # This version uses a table which supports a single modifier (a subset of
7249 # xterm's keys, using the same scheme). Because it supports only a single
7250 # modifier in this table, function keys f36-f48 are normally unavailable
7251 # because they are assigned to modifier-4.
7253 # The program assigns TERM to match the program name (the upstream source says
7254 # "st", but Debian renames it to "stterm").
7256 # The source includes two entries which are not useful here:
7257 # st-meta| simpleterm with meta key,
7258 # st-meta-256color| simpleterm with meta key and 256 colors,
7259 # because st's notion of "meta" does not correspond to the terminfo definition.
7260 # Rather, it acts like xterm - when the meta feature is disabled.
7263 # Added eo, removed ul -TD
7266 # implements control-modifier, but not control-shift for special keys
7267 # implements alt-modifier, but not alt-shift for special keys
7270 # http://git.suckless.org/st/log/st.info
7271 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
7272 # still has no function keys past kf36 (no combinations of modifiers)
7273 # no application keypad mode, e.g, kent.
7274 st-0.6|simpleterm 0.6,
7275 am, bce, hs, mir, msgr, npc, xenl, XT,
7276 colors#8, cols#80, it#8, lines#24, pairs#64,
7277 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
7279 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
7280 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7281 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7282 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7283 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7284 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7285 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
7286 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7287 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
7288 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
7289 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
7290 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
7291 kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
7292 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7293 kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F, kent=\EOM,
7294 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7295 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
7296 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
7297 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
7298 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
7299 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
7300 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
7301 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
7302 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
7303 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
7304 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
7305 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
7306 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
7307 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
7308 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
7309 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
7310 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
7311 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kil1=\E[2;5~,
7312 kind=\E[1;2B, kmous=\E[M, kri=\E[1;2A, krmir=\E[2;2~,
7313 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m, rc=\E8,
7314 rev=\E[7m, ri=\EM, rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>,
7315 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
7316 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7317 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7319 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7321 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7322 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7323 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
7324 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
7325 u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
7326 Ss=\E[%p1%d q, use=vt220+pcedit, use=ecma+index,
7327 use=xterm+alt1049, use=vt220+cvis, use=xterm+sl,
7328 use=ecma+italics, use=ecma+strikeout,
7332 # Note: the original terminfo description uses leading blank to persuade
7333 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
7336 # Reading the code shows it should work for aixterm 16-colors
7337 # - added st-16color
7340 # - set eo (erase-overstrike)
7342 # - tbc doesn't work
7344 # - cbt doesn't work
7345 # - shifted cursor-keys send sequences like rxvt
7346 # - sgr referred to unimplemented "invis" mode.
7347 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
7348 simpleterm|old-st|simpleterm 0.1.1,
7349 am, eo, mir, msgr, ul, xenl,
7350 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7351 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7352 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7353 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=\n,
7354 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7355 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
7356 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG,
7357 ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?,
7358 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7359 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
7360 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7361 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7362 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
7363 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
7364 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7365 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7367 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
7368 use=vt220+cvis, use=ecma+index,
7369 st-16color|stterm-16color|simpleterm with 16-colors,
7370 use=ibm+16color, use=st,
7371 # Tested with st 0.8.2
7372 # The issue with the titlebar is fixed, though st is very slow.
7373 # In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
7374 # garbage is shown in the titlebar.
7376 # terminal wants to use TERM=stterm-256color, but that is longer than 14
7377 # characters, making the choice nonportable.
7378 st-256color|stterm-256color|simpleterm with 256 colors,
7379 use=xterm+256color, use=st,
7382 # https://github.com/software-jessies-org/jessies/wiki/Terminator
7384 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
7385 # Debian/current -TD (2011/8/20)
7387 # There were some packaging problems:
7388 # a) using Java, the program starts off using 50Mb, and climbs from there,
7389 # up to 114Mb after testing (no scrollback).
7390 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
7391 # (two copies, just in case the host happens to be Mac OS X).
7392 # I deleted this after testing with tack.
7394 # Issues/features found with tack:
7395 # a) tbc does not work (implying that hts also is broken).
7396 # Comparing with the tabs utility shows a problem with the last tabstop on
7398 # b) has xterm-style shifted function-key strings
7399 # meta also is used, but control is ignored.
7400 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
7402 # d) some combinations of shift/control send xterm-style sequences for
7403 # insert/delete/home/end.
7404 # e) numeric keypad sends only numbers (compare with vttest).
7405 # f) meta mode (km) is not implemented.
7407 # Issues found with ncurses test-program:
7408 # a) bce is inconsistently implemented
7409 # b) widths of Unicode values above 256 do not always agree with wcwidth.
7411 # Checked with vttest, found low degree of compatibility there.
7413 # Checked with xterm's scripts, found that the 256-color palette is fixed.
7417 # b) corrected sgr0 to reset alternate character set
7418 # c) modified smacs/rmacs to use SCS rather than SI/SO
7422 # Revisiting in May 2019, the Debian package was no longer available, and a
7423 # developer-provided ".deb" does not work. However, a usable Windows ".msi"
7424 # (which relies upon Cygwin) can be tested. The developers provide a terminfo,
7425 # but some of the features it lists do not work reliably (bce, italics, invis).
7429 # invis attribute fails
7430 # key-definitions could be expanded, with some work:
7431 # + supports xterm-style cursor key-modifiers for shift
7432 # + supports xterm-style function key-modifiers for shift,control,alt
7433 # + supports xterm-style editing key-modifiers for shift,control,alt
7435 # ncurses test-program:
7436 # "C" menu shows that bce implementation is incomplete
7437 # italics did not work
7438 # dim worked once in tack, but not in ncurses test-program
7439 # "F" thick-line characters do not display
7441 # terminal does not respond to 80/132-column switching
7442 # wrapping at the right margin is erratic
7443 # there are several problems in the cursor-movements and screen-features
7444 # no VT52, no double-sized characters
7445 # Device attributes response says it is a vanilla VT100
7446 # does not respond to xterm mouse controls
7447 # alternate screen tests do not fill the screen, return wrong position
7448 # window modify/report operations do not work
7449 # miscellaneous ISO-6429 tests, e.g., REP, do not work
7450 # CBT, CHT, HPR, CNL,CPL, VPR do not work
7452 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
7453 # use xterm+256setaf, etc -TD
7454 terminator|Terminator no line wrap,
7455 bce, eo, mir, msgr, xenl, xon,
7456 cols#80, it#8, lines#24, lm#0,
7457 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7458 bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7459 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7460 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7461 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7462 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7463 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7464 flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7465 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
7466 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
7467 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7468 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7469 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR,
7470 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
7471 kf9=\E[20~, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
7472 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
7473 rs2=\E[!p\E[?3;4l\E[4l\E>, s0ds=\E(B, s1ds=\E(0, sc=\E7,
7474 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
7475 %;m%?%p9%t\E(0%e\E(B%;,
7476 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
7477 smul=\E[4m, tbc=\E[3g, tsl=\E]2;, vpa=\E[%i%p1%dd,
7478 use=vt220+pcedit, use=ecma+italics, use=ecma+index,
7479 use=xterm+256setaf, use=xterm+sl-twm,
7480 use=xterm+alt1049, use=vt220+cvis,
7483 # https://www.enlightenment.org/about-terminology
7484 # https://github.com/borisfaure/terminology
7487 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a VT100
7488 # emulator, nor is it compatible with xterm, but it uses a few features from
7492 # cursor does not fill on focus
7493 # there are pervasive problems with clearing/erasing parts of the screen
7494 # resizing the window causes it to stop listening to the keyboard
7496 # doesn't understand VT100 CPR needed for resize
7501 # uses bce model for colors, but (see below) fails the vttest screens
7502 # has partial support for 256color feature.
7503 # tack function-keys (a subset of xterm+pcf0), and
7504 # tack cursor-keys (a subset of xterm+pce2):
7505 # ctrl+shift (ignored)
7507 # shift-alt modifier -> shift (2)
7511 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
7512 # ctrl + khome/kend works - none of the other modifiers do
7514 # spits lots of messages from termptyesc.c especially in vttest.
7515 # no 132-column mode
7516 # fails menu 1, 2 (definitely not VT100-compatible)
7517 # primary (claims VT420 with several options, apparently none work) and
7518 # secondary report says (perhaps... VT420): \E[>41;285;0c
7519 # CHA, HPR, VPA, CNL, CPL work
7520 # BCE with ED/EL - fail
7521 # BCE with ECH/indexing - fail
7523 # unlike teken, background light/dark works
7525 # X10 and Normal mouse work
7526 # Any-event mouse works
7527 # Mouse button-event works
7529 # This description uses xterm+pcf0, which is misleading because the program
7530 # does not handle combinations of modifiers - but listing them all would
7531 # involve more effort than its developers spent -TD
7532 terminology-0.6.1|EFL-based terminal emulator (0.6.1),
7534 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
7535 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7536 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7537 kind=\E[1;2B, kri=\E[1;2A,
7538 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
7539 %;m%?%p9%t\016%e\017%;$<2>,
7540 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
7541 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
7542 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
7543 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
7544 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
7545 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
7546 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
7547 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
7551 # Tested terminology 1.0.0
7554 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
7555 # and control+alt were added like xterm+pcc2
7556 # Editing keys have some features from xterm+pce2
7557 # Changed from xterm+pcf0 to xterm+pcf2
7562 # Aside from the partial fixes for function/cursor/editing keys, no improvement
7563 # in other tests versus 0.6.1
7564 terminology-1.0.0|EFL-based terminal emulator (1.0.0),
7565 dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
7566 khome=\E[OH, rmacs=\E(B,
7567 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7568 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
7569 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
7570 use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2,
7571 use=xterm+pcf2, use=xterm+pcc2, use=terminology-0.6.1,
7574 # Tested terminology 1.8.1 using tack and vttest.
7576 # flash does not work
7577 # italics and crossed-out text work
7580 # DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling
7581 # DA2 says this is a VT510, version 33.7
7582 # NRCS does not work, program hangs in the locking shift test.
7583 # some of the VT420 rectangle operations work
7584 # left/right margins do not work
7585 # most of DECSCUSR works
7586 # most problems with bce are fixed.
7587 terminology-1.8.1|EFL-based terminal emulator (1.8.1),
7589 cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
7590 use=ecma+index, use=xterm+256setaf, use=ansi+rep,
7591 use=ecma+strikeout, use=xterm+sm+1006,
7592 use=xterm+pcfkeys, use=xterm+tmux, use=vt220+cvis,
7593 use=ecma+italics, use=xterm-basic,
7595 terminology|EFL-based terminal emulator,
7596 use=terminology-1.8.1,
7598 ######## OPENGL CLIENTS
7601 # https://github.com/jwilm/alacritty
7602 # Version 0.6.0 (2020/11/25)
7603 # Version 0.4.0 (2019/11/25)
7604 # Version 0.3.3 (2019/08/03)
7605 # Version 0.2.1 (2018/10/03)
7606 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
7607 # terminal programs) is not designed to run with a remote server.
7609 # Packaged in Arch Linux -
7611 # initial screensize 24x80
7612 # no DECCOLM (does not switch between 80/132 columns)
7613 # otherwise, passes wrapping test
7615 # identifies as a VT102
7616 # numeric keypad does not send expected codes (seen in 0.4.0)
7619 # ECH works in 0.3.3 (0.2.1 left text on right margin)
7623 # does not implement any of the DECRQM/DECRPM controls
7624 # does not implement any of the DECRQSS controls
7629 # fails CHT, otherwise ECMA-48 cursor movement ok
7630 # fails ERM/SPA, SL, SR, passes REP, SD, SU
7633 # has normal and highlight mouse
7634 # has any-event and button-event mouse
7635 # + does support SGR-mouse
7636 # + does not correctly support focus in/out events (seen in 0.4.0)
7637 # cursor-position wrong after alternate-screen (fixed in 0.4.0)
7638 # none of the dtterm controls work
7640 # bell and flash do not work
7641 # blink does not work
7642 # italics and crossed-out work (latter did not work in 0.2.1)
7643 # function-keys work up (tested combinations which window manager allows)
7644 # treats meta as escape-prefix
7646 # The program sources include "alacritty" and "alacritty-direct", which are
7647 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
7648 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
7649 alacritty|alacritty terminal emulator,
7650 rs1=\Ec\E]104\007, use=xterm+256color,
7651 use=alacritty+common,
7653 alacritty-direct|alacritty with direct color indexing,
7654 use=xterm+indirect, use=alacritty+common,
7656 # cancel km, since it is not actually meta mode -TD
7657 # added ecma+strikeout in 0.3.3 -TD
7658 # added xterm+sl-twm in 0.3.3 -TD
7659 alacritty+common|base fragment for alacritty,
7661 kb2=\EOE, kbs=^?, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
7662 Smulx=\E[4:%p1%dm, use=ecma+index, use=xterm+sm+1006,
7663 use=xterm-basic, use=xterm+app, use=ansi+rep,
7664 use=xterm+tmux, use=ecma+strikeout, use=xterm+sl-twm,
7665 use=ecma+italics, use=xterm+pce2, use=xterm+pcc2,
7669 # https://github.com/kovidgoyal/kitty
7670 # Project started in 2016/10 (see alacritty), but is a Python script rather
7671 # than Rust, using OpenGL. The same caveats regarding remote connections
7672 # apply. This is not an X terminal, though (like alacritty), it copies
7673 # features from xterm.
7675 # Regarding the name "kitty", that is a pun, reflected in the description.
7677 # http://www.9bis.net/kitty/
7678 # https://github.com/kovidgoyal/kitty/issues/9
7679 # https://github.com/kovidgoyal/kitty/issues/1025
7681 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
7682 # https://github.com/kovidgoyal/kitty/issues/879
7684 # Version 0.21.2 (June 28, 2021)
7685 # changes since 0.19.1
7687 # Repeatable tests with tack and vttest assume a standard screensize --
7688 # measured in characters. However, kitty uses pixel-measurements and
7689 # does not readily use characters.
7690 # Resizing with twm shows only pixel-based hint rather than characters
7691 # manual page states that it is possible to override initial window size,
7692 # but configuration file has no effect on initial window size.
7693 # The same problem with XFCE4, but editing the cached json file works
7694 # for setting the window size (the "c" suffix for cells does not):
7695 # {"window-size": [720, 440]}
7696 # though the values depend upon the font in use.
7700 # invisible text still does not work
7701 # function/special key modifiers finally work
7703 # Version 0.19.1 (October 6, 2020)
7704 # changes since 0.13.3:
7707 # REP works, though using unspecified behavior
7709 # xterm's SGR-mouse mode is recognized.
7710 # does recognize original alternate-screen
7711 # bug: mouse focus in/out does not work.
7712 # bug: X10 mouse mode responds like any-event
7713 # bug: highlight-tracking does not work; terminal hangs.
7716 # rs1 adds an empty string for resetting title- and other OSC-strings.
7719 # Version 0.13.3 (January 19, 2019)
7721 # initial screensize 71x22
7722 # does not respond to "resize -s"
7723 # resizing with window manager gives no clues
7725 # does not switch between 80/132 columns
7726 # fails wrapping test, copying vte/rxvt
7727 # no reverse-background, no blink
7728 # claims to be VT200:
7730 # secondary \E[>1;4000;12c
7732 # no GR in the locking-shifts screen
7733 # no NRCS or ISO-2022, anyway
7736 # has DECTCEM, ECH, but no SRM and DECSCA
7737 # has operating condition report, none of the others
7740 # DECRQSS ok for DECSTBM, SGR, none of the others
7743 # DECXCPR device status works, none of the others
7744 # no left/right margins
7745 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
7746 # inside of DECCARA is uncolored
7747 # line-drawing with DECCARA does not work
7748 # aside from left/right margins, editing sequences look ok
7751 # fails ECH test for bce
7753 # fails REP, SL, SL, but other cursor-movement ok
7755 # does not recognize original alternate-screen
7756 # cursor-position wrong after alternate-screen
7757 # has normal mouse, any-event, any-button, but
7759 # no mouse-highlight tracking
7761 # dtterm - only supports report-size chars/pixels
7762 # recognizes tcap-query
7764 # flash doesn't work
7765 # italics do not work
7766 # bce should be set (but see vttest)
7767 #* developer's terminfo stopped at kf25, but the program continues,
7768 # copying xterm for the rest of the control+fkey sequence
7769 # (but only one modifier is supported, like iTerm2).
7770 #* it omitted shifted pageup/down
7771 #* control+editing keys work
7772 # In contrast to function-keys, some additional modifier combinations
7773 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
7774 # the implementation is incomplete, the building-blocks are consistent
7775 # with what has been implemented -TD
7776 # DECKPAM does not work -TD
7777 #* ka1, ka3, kc1, kc3 were bogus (removed)
7778 #* meta sends escape (removed kmm) -TD
7779 #* cvvis does not make cursor "more visible" -TD
7781 use=xterm+256color, use=kitty+common,
7782 kitty-direct|KovId's TTY using direct colors,
7783 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
7784 kitty+common|KovId's TTY common properties,
7785 am, mc5i, mir, msgr, npc, xenl,
7786 cols#80, it#8, lines#24,
7787 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7789 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
7790 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7791 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7792 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7793 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7794 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7795 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7796 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7797 ind=\n, kBEG=\E[1;2E, kbeg=\EOE, kbs=^?, kcbt=\E[Z,
7798 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7799 kdch1=\E[3~, kend=\EOF, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
7800 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
7801 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
7802 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
7803 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
7804 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
7805 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
7806 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
7807 kf35=\E[23;5~, kf36=\E[24;5~, kf4=\EOS, kf5=\E[15~,
7808 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH,
7809 kich1=\E[2~, kind=\E[1;2B, knp=\E[6~, kpp=\E[5~,
7810 kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7811 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l,
7812 rmso=\E[27m, rmul=\E[24m, rs1=\E]\E\\\Ec, sc=\E7,
7813 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7815 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7816 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7817 vpa=\E[%i%p1%dd, Smulx=\E[4:%p1%dm, use=ansi+enq,
7818 use=ansi+rep, use=xterm+sm+1006, use=ecma+index,
7819 use=xterm+pcfkeys, use=xterm+sl-twm,
7820 use=ecma+strikeout, use=ecma+italics,
7821 use=xterm+alt1049, use=att610+cvis, use=xterm+tmux,
7823 kitty+setal|set underline colors (nonstandard),
7824 setal=\E[58:2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1
7827 ######## WAYLAND CLIENTS
7830 # https://codeberg.org/dnkl/foot/
7833 # This identifies as a VT220 with 4=sixel and 22=color, however:
7835 # bell does not work
7836 # status-line does not work because foot does not set the window title
7837 # sends escape when meta key is used, whether or not smm/rmm enabled
7840 # no application-mode for numeric keypad (unless private mode 1035 is set)
7844 # protected areas do not work
7845 # SU/SD work, SL/SR do not
7846 # DECRPM responds, but not the corresponding ANSI reports.
7847 # otherwise few reports, except cursor-position and mouse and some dtterm
7848 # VT520 cursor-movement works, except for left/right margins
7849 # supports xterm/DECSCUSR, though default case in vttest does not blink
7850 # Send: <27> [ 0 <32> q
7851 # Text: The cursor should be a blinking rectangle
7852 # partial support for xterm mouse any-event mode and button-event mode:
7853 # + does not report focus-in/focus-out
7854 # + does not report buttons 6/7
7855 # alternate-screen works
7856 foot|foot terminal emulator,
7857 oc=\E]104\E\\, use=xterm+256color2, use=foot+base,
7859 foot-direct|foot with direct color indexing,
7860 use=xterm+direct, use=foot+base,
7862 foot+base|foot base fragment,
7863 am, bce, bw, hs, mir, msgr, npc, xenl, AX, XT,
7864 cols#80, it#8, lines#24,
7865 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7866 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7867 cub1=^H, cud1=\n, dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7868 el1=\E[1K, flash=\E]555\E\\, ind=\n, invis=\E[8m,
7869 is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^?, kcbt=\E[Z,
7870 oc=\E]104\E\\, op=\E[39;49m, rev=\E[7m, ri=\EM, rmacs=\E(B,
7871 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
7872 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
7873 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7874 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
7875 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
7876 smso=\E[7m, smul=\E[4m, E3=\E[3J, use=att610+cvis,
7877 use=ansi+csr, use=ansi+cup, use=ansi+enq, use=ansi+local,
7878 use=ansi+idc, use=ansi+idl, use=ansi+rca2, use=ansi+rep,
7879 use=ansi+tabs, use=ecma+index, use=ecma+italics,
7880 use=ecma+strikeout, use=xterm+alt+title,
7881 use=xterm+pcfkeys, use=xterm+sm+1006, use=xterm+tmux2,
7884 ######## WEB CLIENTS
7887 # https://domterm.org
7889 # Quoting its webpage:
7890 # The domterm command runs a server that manages sessions (usually shell
7891 # processes). The user interface and terminal emulation is handled by a
7892 # JavaScript library that can run in a regular web browser or an embedded
7893 # browser such as Electron, using Web Sockets to talk to the server.
7895 # it can connect to, and display in, a web browser, or as a standalone Qt
7896 # application. Either way, it displays in the current desktop session.
7898 # Testing current code (2019/07/06) with Fedora 30:
7907 # bce screen shows diagonal lines...
7909 # kf11 toggles maximize
7910 # cursor-key application mode works
7911 # numeric keypad application does not work; keys always send face-codes
7912 # sends utf-8 for meta, like xterm
7914 # has problems with menu #1 (wrapping)
7915 # DA = VT200 with 132 columns, color
7916 # DA2 = 990, 100300 ("\E[>990;100300;0c")
7917 # no VT52, no double-size characters
7918 # vt220 ECH test works, SRM, DECSCA do not
7919 # S7C1T/S8C1t does not work
7920 # DECUDK does not work
7921 # CNL does not work; the other ECMA-48 cursor-movement tests work
7922 # REP sort-of works (does not match xterm)
7923 # SD/SU work, but not SL/SR
7924 # window reporting: works for size in chars/pixels, but not other tests
7925 # X10 mouse clicks work -- but return 4 rather than 1 for codes
7926 # any-event mouse mode acts like any-button mode
7927 # implements SGR mouse-mode
7929 # does not implement initc
7930 # does accept either colons or semicolon in 38/48 SGR.
7931 domterm|DomTerm web client,
7933 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
7934 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7936 sitm@, smkx=\E[?1h, use=xterm+256setaf, use=ecma+index,
7937 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm-basic,
7939 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
7942 # Columbus UNIX virtual terminal. This terminal also appears in
7943 # UNIX 4.0 and successors as line discipline 1 (?), but is
7944 # undocumented and does not really work quite right.
7945 cbunix|cb unix virtual terminal,
7947 cols#80, lines#24, lm#0,
7948 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7949 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
7950 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
7951 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
7952 smso=\Ea^D, smul=\Ea^A,
7953 # (vremote: removed obsolete ":nl@:" -- esr)
7954 vremote|virtual remote terminal,
7956 cols#79, use=cbunix,
7958 pty|4bsd pseudo teletype,
7959 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
7960 smso=\Ea$, smul=\Ea!, use=cbunix,
7964 # https://www.emacswiki.org/emacs/AnsiTerm
7965 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
7967 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
7968 eterm|GNU Emacs term.el terminal emulation,
7971 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7972 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7973 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7974 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7975 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7976 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7977 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
7978 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7979 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
7982 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
7983 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
7984 am, mir, msgr, xenl,
7985 colors#8, cols#80, lines#24, pairs#64,
7986 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7987 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7988 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7989 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7990 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7991 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7992 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
7993 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7994 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
7995 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
7996 setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
7997 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
7999 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
8000 u6=\E[%i%d;%dR, u7=\E[6n, use=vt220+pcedit,
8002 # shell.el can "do" color, though not nearly as well.
8005 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
8008 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
8009 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
8010 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
8012 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
8013 # frequently. The contemporaneous term.el aka ansi-term does not "support"
8014 # italics but does not lose the color information -TD 2017/01/28.
8015 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
8017 colors#8, it#8, ncv#13, pairs#64,
8018 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
8019 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8020 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
8024 # Entries for use by the `screen' program by Juergen Weigert,
8025 # Michael Schroeder, Oliver Laumann. The screen and
8026 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
8027 # come from University of Wisconsin and may be older.
8028 # (screen: added <cnorm> on ANSI model -- esr)
8030 # 'screen' defines extensions to termcap. Some are used in its terminal
8032 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
8033 # AX (bool) Does understand ANSI set default fg/bg color
8034 # (\E[39m / \E[49m).
8035 # S0 (str) Switch charset 'G0' to the specified charset.
8036 # E0 (str) Switch charset 'G0' back to standard charset.
8038 # Initially tested with screen 3.09.08
8040 # According to its manual page
8042 # Screen is a full-screen window manager that multiplexes a physical
8043 # terminal between several processes (typically interactive shells). Each
8044 # virtual terminal provides the functions of a DEC VT100 terminal and, in
8045 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
8046 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
8047 # multiple character sets).
8049 # However, there is a design error in its support for video highlights. The
8050 # program uses a table (rendlist) which equates the SGR codes to terminal
8051 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
8052 # is modified only by the presence or absence of the corresponding capabilities.
8053 # Not by their values.
8055 # If screen sets the TERMCAP variable, it uses hardcoded strings which
8056 # correspond to the rendlist table.
8058 # The table gives this information:
8070 # 22 reset bold, standout and dim
8072 # 24 reset underline
8077 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
8078 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
8079 # Without some redesign of screen, it is not possible to extend the set of
8080 # capabilities. Substitution would be possible, e.g., sending italics in
8081 # place of underline.
8083 # Because screen uses hard-coded parsing, it does not check if two capabilities
8084 # use the same value. For example, changing standout to be the same as any of
8085 # the other capabilities will confuse screen. Curses applications which use
8086 # sgr are not impacted (because that usually resets all capabilities before
8087 # setting any), but termcap applications do not use sgr -TD
8089 # The "screen" entry should use ecma+index rather than just indn, but tmux
8090 # defaults to using "screen". For background, screen supported ecma+index
8091 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
8092 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
8093 # terminfo entries (which list about 60% of the control sequences).
8094 screen|VT 100/ANSI X3.64 virtual terminal (base),
8095 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
8096 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
8097 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
8099 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8100 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
8101 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8102 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8103 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8104 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8105 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8106 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
8107 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8108 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
8109 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
8110 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
8111 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
8112 kf9=\E[20~, kmous=\E[M, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
8113 rmacs=^O, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
8114 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
8115 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
8116 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
8117 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
8118 smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
8119 E0=\E(B, S0=\E(%p1%c, use=vt220+pcedit,
8120 use=xterm+alt1049, use=ecma+color, use=vt100+enq,
8121 # The bce and status-line entries are from screen 3.9.13 (and require some
8122 # changes to .screenrc).
8123 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
8126 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
8127 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen4,
8129 # ======================================================================
8130 # Entries for GNU Screen with 16 colors.
8131 # Those variations permit to benefit from 16 colors palette, and from
8132 # bold font and blink attribute separated from bright colors. But they
8133 # are less portable than the generic "screen" 8 color entries: Their
8134 # usage makes real sense only if the terminals you attach and reattach
8135 # do all support 16 color palette.
8137 screen-16color|GNU Screen with 16 colors,
8138 use=ibm+16color, use=screen4,
8140 screen-16color-s|GNU Screen with 16 colors and status line,
8141 use=ibm+16color, use=screen-s,
8143 screen-16color-bce|GNU Screen with 16 colors and BCE,
8144 use=ibm+16color, use=screen-bce,
8146 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
8147 bce, use=ibm+16color, use=screen-s,
8149 # ======================================================================
8150 # Entries for GNU Screen 4.02 with --enable-colors256.
8152 screen-256color|GNU Screen with 256 colors,
8153 use=xterm+256setaf, use=screen4,
8155 screen-256color-s|GNU Screen with 256 colors and status line,
8156 use=xterm+256setaf, use=screen-s,
8158 screen-256color-bce|GNU Screen with 256 colors and BCE,
8159 bce, use=xterm+256setaf, use=screen-bce,
8161 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
8162 bce, use=xterm+256setaf, use=screen-s,
8164 screen.xterm-256color|GNU Screen with xterm using 256 colors,
8165 use=xterm+256setaf, use=screen.xterm-new,
8167 screen.konsole-256color|GNU Screen with konsole using 256 colors,
8168 use=xterm+256setaf, use=screen.konsole,
8170 screen.vte-256color|GNU Screen with vte using 256 colors,
8171 use=xterm+256setaf, use=screen.vte,
8173 screen.putty-256color|GNU Screen with putty using 256 colors,
8174 use=xterm+256setaf, use=screen.putty,
8176 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
8177 use=xterm+256setaf, use=screen.mlterm,
8179 # ======================================================================
8181 # Read the fine manpage:
8182 # When screen tries to figure out a terminal name for
8183 # itself, it first looks for an entry named "screen.<term>",
8184 # where <term> is the contents of your $TERM variable. If
8185 # no such entry exists, screen tries "screen" (or "screen-w"
8186 # if the terminal is wide (132 cols or more)). If even this
8187 # entry cannot be found, "vt100" is used as a substitute.
8189 # Notwithstanding the manpage, screen uses its own notion of the termcap
8190 # and some keys from "screen.<term>" are ignored. Here is an entry which
8191 # covers those (tested with screen 4.00.02) -TD
8192 screen+fkeys|function-keys according to screen,
8193 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
8196 # See explanation before "screen" entry. Cancel italics so that applications
8197 # do not assume screen supports the feature. Add this tweak to entries which
8198 # extend screen for terminals which do support italics.
8199 screen+italics|screen cannot support italics,
8202 # Here are a few customized entries which are useful -TD
8205 # (a) screen does not support invis.
8206 # (b) screen's implementation of bw is incorrect according to tack.
8207 # (c) screen appears to hardcode the strings for khome/kend, making it
8208 # necessary to override the "use=" clause's values (screen+fkeys).
8209 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
8210 # which is NOT the same as the terminfo screen.<term>.
8211 # (e) when screen finds one of these customized entries, it sets $TERM to
8212 # match. Hence, no "screen.xterm" entry is provided, since that would
8213 # create heartburn for people running remote xterm's.
8214 # (f) screen does not support rep.
8216 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
8217 # since the default translations override the built-in keycode
8218 # translation. They are suppressed here to show what is tested by tack.
8219 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
8221 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
8222 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8223 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
8224 E3@, use=screen+italics, use=screen+fkeys,
8225 use=xterm+x11mouse, use=xterm-p370,
8226 #:screen.xterm|screen for modern xterm,
8227 #: use=screen.xterm-new,
8228 # xterm-r6 does not really support khome/kend unless it is propped up by
8229 # the translations resource.
8230 screen.xterm-r6|screen customized for X11R6 xterm,
8231 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
8232 # Color applications running in screen and TeraTerm do not play well together
8233 # on Solaris because Sun's curses implementation gets confused.
8234 screen.teraterm|disable ncv in teraterm,
8236 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
8237 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
8238 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
8239 use=screen+fkeys, use=xterm+x11mouse, use=screen4,
8241 screen.rxvt|screen in rxvt,
8243 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8244 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
8245 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
8247 screen.Eterm|screen in Eterm,
8248 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
8249 screen.mrxvt|screen in mrxvt,
8250 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
8251 screen.vte|screen in any VTE-based terminal,
8252 use=xterm+x11mouse, use=screen+italics,
8253 use=screen+fkeys, use=vte,
8254 screen.gnome|screen in GNOME Terminal,
8255 use=xterm+x11mouse, use=screen+italics,
8256 use=screen+fkeys, use=gnome,
8257 screen.konsole|screen in KDE console window,
8258 use=xterm+x11mouse, use=screen+italics,
8259 use=screen+fkeys, use=konsole,
8260 # fix the backspace key
8261 screen.linux|screen.linux-s|screen in Linux console,
8263 kbs=^?, kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
8264 use=screen+fkeys, use=screen4,
8265 screen.mlterm|screen in mlterm,
8266 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
8267 screen.putty|screen in putty,
8268 use=xterm+x11mouse, use=screen+fkeys, use=putty,
8270 # The default "screen" entry is reasonably portable, but not optimal for the
8271 # most widely-used terminal emulators. The "bce" capability is supported in
8272 # screen since 3.9.13, and when used, will require fewer characters to be sent
8273 # to the terminal for updates.
8275 # If you are using only terminals which support bce, then you can use this
8276 # feature in your screen configuration.
8278 # Adding these lines to your ".screenrc" file will allow using these customized
8283 screen-bce.xterm-new|screen optimized for modern xterm,
8285 ech@, use=screen+italics, use=screen.xterm-new,
8286 screen-bce.rxvt|screen optimized for rxvt,
8288 ech@, use=screen.rxvt,
8289 screen-bce.Eterm|screen optimized for Eterm,
8291 ech@, use=screen.Eterm,
8292 screen-bce.mrxvt|screen optimized for mrxvt,
8294 ech@, use=screen.mrxvt,
8295 screen-bce.gnome|screen optimized for GNOME-Terminal,
8297 ech@, use=screen+italics, use=screen.gnome,
8298 screen-bce.konsole|screen optimized for KDE console window,
8300 ech@, use=screen+italics, use=screen.konsole,
8301 screen-bce.linux|screen optimized for Linux console,
8303 ech@, use=screen.linux,
8305 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
8306 cols#132, use=screen4,
8308 screen2|VT 100/ANSI X3.64 virtual terminal (old 2.x),
8309 cols#80, it#8, lines#24,
8310 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
8311 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8312 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8313 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8314 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
8315 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8316 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
8317 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
8318 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
8319 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
8320 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
8321 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
8322 screen3|VT 100/ANSI X3.64 virtual terminal (old 3.x),
8324 cols#80, it#8, lines#24,
8325 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
8326 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8327 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8328 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8329 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8330 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
8331 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
8332 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
8333 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
8334 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
8335 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
8336 smul=\E[4m, tbc=\E[3g,
8338 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
8339 # was last updated in 2009 to include 256-color support. The most recent
8340 # release is 4.6.2 (October 2017).
8341 screen4|VT 100/ANSI X3.64 virtual terminal (4.x),
8342 use=ecma+index, use=screen,
8344 # As of March 2019, screen 5.0 has not been released.
8348 # https://savannah.gnu.org/bugs/?36676
8350 # mentions a change to implement italics which should be in a version 5,
8351 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the
8352 # longstanding use of SGR 3 for standout, and interprets it as italics.
8354 # The same development branch has some support for direct-colors, but none
8355 # of this has been documented.
8356 screen5|VT 100/ANSI X3.64 virtual terminal (someday),
8358 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8359 %p5%t;2%;m%?%p9%t\016%e\017%;,
8360 smso=\E[7m, use=ecma+italics, use=screen4,
8364 # tmux is mostly compatible with screen, but has support for italics, and some
8365 # of the xterm cursor bits.
8367 # However, unlike screen, tmux has no provision for using derived terminal
8368 # descriptions. When screen starts, it looks for a suitable "inner" terminal
8369 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
8370 # various entries such as screen.xterm-new provide a way to more closely
8371 # match the terminal.
8372 tmux|tmux terminal multiplexer,
8373 invis=\E[8m, kbs=^?, rmso=\E[27m,
8374 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8375 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8376 smso=\E[7m, E3=\E[3J, Smulx=\E[4:%p1%dm,
8377 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
8378 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
8381 tmux-256color|tmux with 256 colors,
8382 use=xterm+256setaf, use=tmux,
8384 tmux-direct|tmux with direct-color indexing,
8385 use=kitty+setal, use=xterm+direct, use=tmux,
8391 # mosh's DA1 identifies it as a VT220, but sets $TERM to "xterm" or
8392 # "xterm-256color" (hard-coded), which in its pretense that it is xterm, is
8393 # several years out of date.
8395 # There is little documentation; the existing manpages amount to a quarter of
8396 # the length of mosh.org's heavily promotional website. This entry is based
8397 # on testing, and reading the source-code. For the latter, analysis is aided
8398 # by the developer's extensive use of hard-coded strings.
8400 # The website has an example "Tricky unicode", which shows a shell command
8401 # with a typo (i.e., assuming that a byte in octal uses 4 digits) and suggests
8402 # that mosh and OS X Terminal "gets it right".
8404 # The example as shown would not work. Correcting the typo, xterm gives the
8405 # result expected by the mosh developer.
8407 # The other examples follow in a similar vein.
8409 # It does not support these xterm features:
8410 # use=ansi+rep (xterm patch #36, 1997)
8411 # use=ecma+strikeout (xterm patch #305, 2014)
8412 # use=vt420+lrmm (xterm patch #279, 2012)
8413 # titlestack in smcup/rmcup has no effect (xterm patch #251, 2009)
8414 # does not support "dim" (xterm patch #305, 2014)
8416 # rmkx/smkx has no effect on numeric keypad
8417 # acs stuff has no effect, is included here for ease of comparison
8419 # Unlike screen and tmux, mosh has only limited awareness of a terminal
8420 # description. It assumes that the underlying terminal is xterm, and would
8421 # not work well with terminals using other key-definitions, such as urxvt.
8424 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8425 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
8426 sgr0=\E(B\E[m, use=ansi+enq, use=xterm+meta,
8427 use=ecma+italics, use=ecma+index, use=xterm+acs,
8428 use=xterm+sm+1006, use=xterm+pcfkeys,
8431 mosh-256color|mosh using 256-colors,
8432 use=xterm+256color, use=mosh,
8437 # http://www.brain-dump.org/projects/dvtm/
8439 # + This uses ncurses to manage the display, including support for italics and
8441 # + However, default-colors are incomplete: do not set bce.
8442 # + It does not implement flash (since no \e[?5h)
8443 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
8444 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
8445 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
8446 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
8448 # + It also omits the shifted cursor- and editing-keypad keys.
8449 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
8450 # (and passes those through without interpretation)
8451 # and may simply pass-through rxvt's, making it appear to work.
8452 # In other cases such as kf23 and up, no pass-through is done.
8453 # + Most of the mode-settings in the initialization/reset strings are not
8454 # implemented; dvtm copies its description from rxvt.
8455 dvtm|dynamic virtual terminal manager,
8456 am, eo, mir, msgr, xenl, AX,
8457 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
8458 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8459 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8460 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8461 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8462 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8463 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8464 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8465 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8466 is1=\E[?47l\E=\E[?1l,
8467 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
8468 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
8469 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
8470 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
8471 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~,
8472 kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
8473 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8474 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8475 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$,
8476 kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
8477 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8478 khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, op=\E[39;49m,
8479 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
8480 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8481 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
8482 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
8484 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
8486 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
8488 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
8489 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
8490 use=vt220+vtedit, use=vt220+cvis, use=ecma+italics,
8492 dvtm-256color|dynamic virtual terminal manager with 256 colors,
8493 colors#0x100, pairs#0x10000,
8494 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
8496 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
8502 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
8503 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
8504 # been maintained until recently by the National Center for Supercomputer
8505 # Applications, and it is feature rich, stable and free. It can be downloaded
8506 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
8507 # xterm+sl, and the docs at NCSA. It works well.
8509 # NCSA Telnet 2.6 for Macintosh in VT220 8-bit emulation mode
8510 # The terminal options should be set as follows:
8511 # Xterm sequences ON
8512 # use VT wrap mode ON
8513 # use Emacs arrow keys OFF
8514 # CTRL-COMND is Emacs meta ON
8516 # answerback string: "ncsa-vt220-8"
8517 # setup keys: all disabled
8519 # Application mode is not used.
8521 # Other special mappings:
8528 # PAGEDOWN Next Screen
8530 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
8533 # The status-line manipulation is a mapping of the xterm-compatible control
8534 # sequences for setting the window-title. So you must use tsl and fsl in
8535 # pairs, since the latter ends the string that is loaded to the window-title.
8536 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in VT220-8 mode,
8537 am, km, mir, msgr, xenl,
8538 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8539 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8540 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8541 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8542 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8543 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8544 el=\E[K, el1=\E[1K, enacs=\E)0,
8545 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8546 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
8547 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
8548 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
8549 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8550 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
8551 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
8552 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
8553 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
8554 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
8555 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
8556 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
8557 rmso=\E[27m, rmul=\E[24m,
8558 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
8559 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
8561 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
8562 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8563 u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl,
8565 ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color),
8566 use=ncsa-m, use=klone+color,
8567 ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line),
8569 dsl@, fsl@, tsl@, use=ncsa,
8570 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line),
8572 dsl@, fsl@, tsl@, use=ncsa-m,
8574 # The documented function-key mapping refers to the Apple Extended Keyboard
8575 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
8576 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
8577 # some keyboards and many applications require these as F1-F4.
8579 ncsa-vt220|NCSA Telnet using VT220-compatible function keys,
8580 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8581 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8582 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
8583 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
8584 kf8=\E[19~, kf9=\E[20~, use=ncsa,
8586 #### Pilot Pro Palm-Top
8588 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
8589 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
8590 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
8593 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
8594 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
8595 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
8598 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
8599 # These entries are for the Embeddable Linux Kernel System (ELKS)
8600 # project - an heavily stripped down Linux to be run on 16 bit
8601 # boxes or, eventually, to be used in embedded systems - and have been
8602 # adapted from the stock ELKS termcap. The project itself looks stalled,
8603 # and the latest improvements I know of date back to March 2000.
8605 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
8606 # as an added bonus, this deals with all the capabilities common to
8607 # both VT52 and ANSI (or, eventually, "special") modes.
8609 elks-glasstty|ELKS glass-TTY capabilities,
8611 cols#80, it#8, lines#25,
8612 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
8615 elks-vt52|ELKS VT52 console,
8616 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8617 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
8618 home=\EH, use=elks-glasstty,
8620 elks-ansi|ELKS ANSI console,
8621 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8622 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8623 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
8625 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
8626 # instead of VT52, but the "elks" entry still refers to the latter.
8628 elks|default ELKS console,
8631 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
8632 # one but in screen size
8634 sibo|ELKS SIBO console,
8635 cols#61, it#8, lines#20, use=elks-vt52,
8637 ######## COMMERCIAL WORKSTATION CONSOLES
8643 # This is from the OSF/1 Release 1.0 termcap file
8644 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
8647 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8648 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8649 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
8650 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
8651 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8656 # :is1: resets scrolling region in case a previous user had used "tset VT100"
8657 oldsun|Sun Microsystems Workstation console,
8658 OTbs, am, km, mir, msgr,
8659 cols#80, it#8, lines#34,
8660 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
8661 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8662 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8663 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8664 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8665 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
8666 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8667 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
8668 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
8669 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
8670 sun-il|Sun Microsystems console with working insert-line,
8673 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8674 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8675 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8676 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8677 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8678 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
8679 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
8680 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
8681 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
8682 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
8683 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
8684 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8685 smso=\E[7m, u8=\E[1t, u9=\E[11t,
8686 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
8687 # flake out on the last line. Unfortunately, without them the terminal has no
8689 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
8690 il@, il1@, use=sun-il,
8691 # If you are using an SS5, change the sun definition to use sun-ss5.
8692 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
8695 sun+sl|Sun Workstation window status line,
8697 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
8699 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
8700 sun-s|Sun Microsystems Workstation window with status line,
8701 use=sun+sl, use=sun,
8702 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
8703 use=sun+sl, use=sun-e,
8704 sun-48|Sun 48-line window,
8705 cols#80, lines#48, use=sun,
8706 sun-34|Sun 34-line window,
8707 cols#80, lines#34, use=sun,
8708 sun-24|Sun 24-line window,
8709 cols#80, lines#24, use=sun,
8710 sun-17|Sun 17-line window,
8711 cols#80, lines#17, use=sun,
8712 sun-12|Sun 12-line window,
8713 cols#80, lines#12, use=sun,
8714 sun-1|Sun 1-line window for sysline,
8717 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
8718 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
8719 ich1@, rmir@, smir@, use=sun,
8720 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
8722 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
8723 sun-type4|Sun Workstation console with type 4 keyboard,
8724 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
8725 kcuu1=\E[215z, use=sun-il,
8727 # Most of the current references to sun-color are from users wondering why this
8728 # is the default on install. Details from reading the wscons manpage, adding
8729 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
8730 # when those were added -TD (2005-05-28)
8732 # According to wscons manpage, color is supported only on IA systems.
8733 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
8734 # does not list these. It also sets ncv#3, however that corresponds to
8735 # underline and standout.
8737 # Since the documentation and terminfo do not agree, see also current code at
8738 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
8740 # That (actually a different driver which "supports" sun-color) also supports
8747 # It supports bold, but not underline -TD (2009-09-19)
8748 sun-color|Sun Microsystems Workstation console with color support (IA systems),
8749 colors#8, ncv#3, pairs#64,
8750 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
8751 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
8752 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8753 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8755 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8757 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8758 smso=\E[7m, use=sun,
8763 # (wsiris: this had extension capabilities
8764 # :HS=\E7F2:HE=\E7F7:\
8765 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
8766 # See the note on Iris extensions near the end of this file.
8767 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
8768 # <flash> from BRL -- esr)
8769 wsiris|iris40|IRIS emulating a 40 line Visual 50 (approximately),
8770 OTbs, OTnc, OTpt, am,
8771 OTkn#3, cols#80, it#8, lines#40,
8772 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
8773 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8774 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
8775 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
8776 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
8777 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
8778 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
8779 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
8784 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
8785 # environment). Note: these have nothing to do with Sony's News workstation
8789 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
8790 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
8791 psterm|psterm-basic|NeWS psterm-80x34,
8792 OTbs, am, hs, km, ul,
8793 cols#80, it#8, lines#34,
8794 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
8795 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
8796 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
8797 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
8798 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
8799 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
8800 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
8802 psterm-96x48|NeWS psterm 96x48,
8803 cols#96, lines#48, use=psterm,
8804 psterm-90x28|NeWS psterm 90x28,
8805 cols#90, lines#28, use=psterm,
8806 psterm-80x24|NeWS psterm 80x24,
8807 cols#80, lines#24, use=psterm,
8808 # This is a faster termcap for psterm. Warning: if you use this termcap,
8809 # some control characters you type will do strange things to the screen.
8810 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
8811 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
8812 OTbs, am, hs, km, ul,
8813 cols#80, it#8, lines#34,
8814 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
8815 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
8816 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
8817 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8818 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
8819 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
8820 smso=^Oo, smul=^Ou, tsl=^Ol,
8824 # Use `glasstty' for the Workspace application
8827 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
8830 cols#80, it#8, lines#24,
8831 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8832 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8833 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8834 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
8835 nextshell|NeXT Shell application,
8838 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
8841 #### Sony NEWS workstations
8844 # (news-unk: this had :KB=news: -- esr)
8845 news-unk|Sony NEWS VT100 emulator common entry,
8846 OTbs, OTpt, am, xenl,
8848 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
8849 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
8850 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
8851 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8852 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
8853 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
8854 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
8855 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
8856 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
8857 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
8858 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
8859 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
8861 # (news-29: this had :TY=ascii: --esr)
8862 news-29|Sony NEWS VT100 emulator with 29 lines,
8863 lines#29, use=news-unk,
8864 # (news-29-euc: this had :TY=euc: --esr)
8865 news-29-euc|Sony NEWS VT100 emulator with 29 lines and EUC,
8867 # (news-29-sjis: this had :TY=sjis: --esr)
8868 news-29-sjis|Sony NEWS VT100 emulator with 29 lines and SJIS,
8871 # (news-33: this had :TY=ascii: --esr)
8872 news-33|Sony NEWS VT100 with 33 lines,
8873 lines#33, use=news-unk,
8874 # (news-33-euc: this had :TY=euc: --esr)
8875 news-33-euc|Sony NEWS VT100 with 33 lines and EUC,
8877 # (news-33-sjis: this had :TY=sjis: --esr)
8878 news-33-sjis|Sony NEWS VT100 with 33 lines and SJIS,
8881 # (news-42: this had :TY=ascii: --esr)
8882 news-42|Sony NEWS VT100 with 42 lines,
8883 lines#42, use=news-unk,
8884 # (news-42-euc: this had :TY=euc: --esr)
8885 news-42-euc|Sony NEWS VT100 with 42 lines and EUC,
8887 # (news-42-sjis: this had :TY=sjis: --esr)
8888 news-42-sjis|Sony NEWS VT100 with 42 lines and SJIS,
8891 # NEWS-OS old termcap entry
8893 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
8894 news-old-unk|old Sony NEWS VT100 emulator common entry,
8895 OTbs, OTpt, am, xenl,
8897 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
8898 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
8899 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8900 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
8901 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
8902 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
8903 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
8904 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8905 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
8907 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
8908 nwp512|news|nwp514|news40|vt100-bm|nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|old Sony VT100 emulator 40 lines,
8911 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
8915 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
8916 nwp512-a|nwp514-a|news-a|news42|news40-a|old Sony VT100 emulator 42 line,
8918 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
8921 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
8922 nwp513|nwp518|nwe501|newscbm|news31|nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 31 lines,
8925 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
8929 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
8930 # also the alias vt100-bm.
8931 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old Sony VT100 emulator 33 lines,
8934 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
8938 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
8939 news28|old Sony VT100 emulator 28 lines,
8942 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
8946 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
8947 news29|news28-a|old Sony VT100 emulator 29 lines,
8949 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
8953 # (news511: this had :TY=sjis: --esr)
8954 nwp511|nwp-511|nwp-511 VT100,
8955 OTbs, OTpt, am, xenl,
8957 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8958 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
8959 ed=\E[J$<30/>, el=\E[K$<3/>,
8960 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8961 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
8962 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
8963 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
8964 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8965 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
8966 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8967 # (news517: this had :TY=sjis:. --esr)
8968 nwp517|nwp-517|nwp-517 VT200 80 cols 30 rows,
8971 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8972 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
8973 tsl=\E[1$}\E[;%df, use=vt220-base,
8974 # (news517-w: this had :TY=sjis:. --esr)
8975 nwp517-w|nwp-517-w|nwp-517 VT200 132 cols 50 rows,
8978 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8979 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8980 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8981 tsl=\E[1$}\E[;%df, use=vt220-base,
8983 #### Common Desktop Environment
8986 # This ships with Sun's CDE in Solaris 2.5
8987 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
8988 dtterm|CDE desktop terminal,
8989 am, mir, msgr, xenl, xon,
8990 cols#80, it#8, lines#24, lm#0, ncv@,
8991 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8992 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
8993 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8994 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8995 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8996 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
8997 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8998 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
8999 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
9000 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
9001 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9002 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9003 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9004 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
9005 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
9006 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9007 khlp=\E[28~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
9008 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
9010 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9011 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9012 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9013 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
9014 use=vt220+cvis, use=ecma+color,
9016 ######## Non-Unix Consoles
9019 #### EMX termcap.dat compatibility modes
9021 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
9022 # no_color_video to inform the application that standout(1), underline(2)
9023 # reverse(4) and invisible(64) don't work with color.
9024 emx-base|DOS special keys,
9027 bel=^G, use=ansi.sys,
9029 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
9030 # a Unix-style environment used on OS/2. (Note that the suffix makes some
9031 # names longer than 14 characters, the nominal maximum).
9033 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
9034 ansi-emx|ANSI.SYS color,
9035 am, bce, eo, mir, msgr, xon,
9036 colors#8, cols#80, it#8, lines#25, pairs#64,
9037 bel=^G, blink=\E[5m, bold=\E[1m,
9038 clear=\E[1;33;44m\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
9039 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9040 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
9041 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
9042 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
9043 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
9044 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
9045 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
9046 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
9047 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
9048 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=vt220+cvis,
9050 # nice colors for Emacs (white on blue, mode line white on cyan)
9051 ansi-color-2-emx|ANSI.SYS color 2,
9052 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
9053 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
9054 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
9055 smul=\E[1;36;44m, use=ansi-emx,
9056 # nice colors for Emacs (white on black, mode line black on cyan)
9057 ansi-color-3-emx|ANSI.SYS color 3,
9058 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
9059 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
9060 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
9061 smul=\E[0;36;40m, use=ansi-emx,
9062 mono-emx|stupid monochrome ANSI terminal with only one kind of emphasis,
9064 cols#80, it#8, lines#24,
9065 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
9066 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
9067 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
9068 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
9069 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
9070 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
9075 # Use this for cygwin32 (tested with beta 19.1)
9076 # underline is colored bright magenta
9077 # shifted kf1-kf12 are kf11-kf22
9078 cygwinB19|ANSI emulation for cygwin32,
9079 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
9080 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9081 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9082 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
9083 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
9084 kf8=\E[19~, kf9=\E[20~, rmam@, smam@, use=vt220+pcedit,
9087 # Use this for cygwin (tested with version 1.1.0).
9088 # I've combined pcansi and linux. Some values of course were different and
9089 # I've indicated which of these were and which I used.
9090 # Cheers, earnie_boyd@yahoo.com
9091 # several changes based on running with tack and comparing with older entry -TD
9092 # more changes from csw:
9094 # remove eo [erase overstrike with blank]
9095 # change clear was \E[H\E[J now \E[2J (faster?)
9098 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
9100 # add cub [cursor back param]
9101 # add cuf [cursor forward param]
9102 # add cuu [cursor up param]
9103 # add cud [cursor down param]
9104 # add hs [has status line]
9105 # add fsl [return from status line]
9106 # add tsl [go to status line]
9107 # add smacs [Start alt charset] (not sure if this works)
9108 # add rmacs [End alt charset] (ditto)
9109 # add smcup [enter_ca_mode] (save console; thanks Corinna)
9110 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
9111 # add kb2 [center of keypad]
9112 # add u8 [user string 8] \E[?6c
9113 # add el [clear to end of line] \E[K
9115 # cnorm [make cursor normal] not implemented
9116 # flash [flash] not implemented
9117 # blink [blink] not implemented very usefully in cygwin? \E[5m
9118 # dim [dim] not implemented very usefully in cygwin? \E[2m
9119 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
9120 # kNXT [shifted next key] not implemented
9121 # kPRV [shifted prev key] not implemented
9122 # khome [home key] really is \E[1~ NOT \E[H
9123 # tbc [clear tab stops] not implemented
9124 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
9125 # smpch [Start PC charset] is \E[11m, same as smacs
9126 # rmpch [End PC charset] is \E[10m, same as rmacs
9127 # mir [move in insert mode] fails in tack?
9128 # bce [back color erase] causes problems with change background color?
9129 # cvvis [make cursor very visible] causes a stackdump when testing with
9130 # testcurs using the output option? \E[?25h\E[?8c
9131 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
9132 # ech [erase characters param] broken \E[%p1%dX
9133 # kcbt [back-tab key] not implemented in cygwin? \E[Z
9136 # Remove cbt since it does not work in current cygwin
9137 # Add 'mir' and 'in' flags based on tack
9138 cygwin|ANSI emulation for Cygwin,
9139 am, hs, mir, msgr, xon,
9140 colors#8, it#8, pairs#64,
9141 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9142 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9143 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9144 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
9145 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9146 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9147 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9148 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
9149 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
9150 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
9151 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9152 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9153 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9154 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
9155 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
9156 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kspd=^Z, nel=\r\n,
9157 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m,
9158 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmpch=\E[10m,
9159 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
9160 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9161 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
9162 %t;8%;%?%p9%t;11%;m,
9163 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
9164 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
9165 vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
9167 # I've supplied this so that you can help test new values and add other
9168 # features. Cheers, earnie_boyd@yahoo.com.
9170 # Some features are from pcansi. The op value is from linux. Function-keys
9171 # are from linux. These have been tested not to cause problems. xenl was in
9172 # this list, but DOES cause problems so it has been removed
9173 cygwinDBG|Debug Version for Cygwin,
9174 am, eo, mir, msgr, xon,
9175 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
9176 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9177 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9178 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9179 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
9180 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
9181 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9182 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
9183 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
9184 el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
9185 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
9186 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$,
9187 kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9188 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, kf10=\E[21~,
9189 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9190 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9191 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
9192 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9193 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
9194 rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9195 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9196 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9197 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
9198 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
9199 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt220+pcedit,
9200 use=vt220+cvis, use=vt102+enq,
9205 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
9206 # encodings used by other x86 environments. All others are invented for DJGPP.
9207 # Oddly enough, while several combinations of modifiers are tabulated, there is
9208 # none for shifted cursor keys.
9260 # Ctrl-Delete \E[43~
9261 # Ctrl-Down Arrow \E[38~
9264 # Ctrl-Insert \E[42~
9265 # Ctrl-Left Arrow \E[39~
9266 # Ctrl-Page Down \E[46~
9267 # Ctrl-Page Up \E[45~
9268 # Ctrl-Right Arrow \E[40~
9269 # Ctrl-Up Arrow \E[37~
9285 # Alt-Down Arrow \E[60~
9289 # Alt-Left Arrow \E[61~
9290 # Alt-Page Down \E[68~
9291 # Alt-Page Up \E[67~
9292 # Alt-Right Arrow \E[62~
9293 # Alt-Up Arrow \E[59~
9322 djgpp|ANSI emulation for DJGPP alpha,
9323 am, bce, msgr, xhp, xon, xt,
9324 colors#8, it#8, pairs#64,
9325 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9326 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9327 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9328 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9329 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
9330 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9331 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9332 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9333 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
9334 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
9335 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
9336 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9337 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9338 kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
9339 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\r\n, op=\E[37;40m,
9340 rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
9342 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
9343 %p6%t;1%;%?%p7%t;8%;m,
9344 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9345 use=vt220+pcedit, use=ecma+index,
9347 djgpp203|entry for DJGPP 2.03,
9349 cols#80, it#8, lines#25,
9350 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
9353 djgpp204|entry for DJGPP 2.04,
9355 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
9356 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9357 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
9358 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9359 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9360 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
9361 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9362 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
9363 il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D,
9364 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, kf1=\E[[A,
9365 kf10=\E[21~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
9366 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kll=\E[4~,
9367 nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
9368 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9369 use=vt220+pcedit, use=ecma+index,
9373 # This is tested using U/Win's telnet. Scrolling is omitted because it is
9374 # buggy. Another odd bug appears when displaying "~" in alternate character
9375 # set (the emulator spits out error messages). Compare with att6386 -TD
9376 uwin|U/Win 3.2 console,
9377 am, eo, in, msgr, xenl, xon,
9378 colors#8, it#8, ncv#58, pairs#64,
9379 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
9380 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
9381 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
9382 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
9383 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9384 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9385 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
9386 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D,
9387 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y,
9388 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
9389 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
9390 kf9=\EOX, khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m,
9391 rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
9392 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
9393 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
9394 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
9395 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
9398 #### Microsoft (miscellaneous)
9400 # This entry fits the Windows NT console when the _POSIX_TERM environment
9401 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
9402 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
9403 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
9404 # systems is not, and (surprise!) they match very well.
9406 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
9407 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
9408 # are the installation instructions a pile of mind-numbing bureaucratese,
9409 # but the termcap entry is actually broken and unusable as given; the :do:
9410 # capability is misspelled "d".
9412 # To use this, you need to a bunch of environment variables:
9414 # SET _POSIX_TERM=on
9416 # SET TERMCAP=location of termcap file in POSIX file format
9417 # which is case-sensitive.
9418 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
9421 # Important note: setting the TMP environment variable in POSIX style renders
9422 # it incompatible with a lot of other applications, including Visual C++. So
9423 # you should have a separate command window just for vi. All the other
9424 # variables may be permanently set in the Control Panel\System applet.
9426 # You can find out more about the restrictions of this facility at
9427 # <https://jeffpar.github.io/kbarchive/kb/108/Q108581/>
9429 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
9430 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
9432 cols#80, it#8, lines#25,
9433 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
9434 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
9435 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
9436 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
9437 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
9438 # From: jew@venus.sunquest.com
9439 # Date: 19 Feb 93 23:41:07 GMT
9440 # Here's a combination of ansi and vt100 termcap
9441 # entries that works nearly perfectly for me
9442 # (Gateway 2000 Handbook and Microsoft Works 3.0):
9443 pcmw|PC running Microsoft Works,
9445 cols#80, it#8, lines#24, vt#3,
9446 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
9447 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
9448 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
9449 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
9450 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
9451 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9452 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
9453 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
9454 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9455 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9456 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
9459 # From: Federico Bianchi
9460 # This is the entry for the OpenNT terminal.
9461 # The ntconsole name is for backward compatibility.
9462 # This is for OpenNT 2.0 and later.
9463 # Later OpenNT was renamed to Interix.
9465 # Presently it is distributed by Microsoft as Services For Unix (SFU).
9466 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
9467 # the documentation dated from 1.9.9e) -TD
9469 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
9470 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
9471 # kf13-kf24 use the shift-key
9472 # kf25-kf36 use the left alt-key
9473 # kf37-kf38 use the control-key
9474 # kf49-kf60 use the shift- and control-keys
9475 # The shifted cursor keys send the sequences originally used for kf61-kf64:
9478 # left=\EF^ (unassigned)
9481 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
9483 cols#80, it#8, lines#25,
9484 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9485 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9486 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9487 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
9488 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
9489 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9490 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
9491 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
9492 kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9493 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U,
9494 kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC,
9495 kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH,
9496 kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL,
9497 kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ,
9498 kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU,
9499 kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ,
9500 kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4,
9501 kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi,
9502 kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo,
9503 kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs,
9504 kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx,
9505 kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9,
9506 khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T,
9507 kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u,
9508 rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
9509 rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b,
9510 smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color,
9512 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
9513 lines#35, use=opennt,
9515 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
9516 lines#50, use=opennt,
9518 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
9519 lines#60, use=opennt,
9521 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
9522 lines#100, use=opennt,
9524 # OpenNT wide terminals
9525 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
9526 cols#125, use=opennt,
9528 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
9529 lines#35, use=opennt-w,
9531 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
9532 lines#50, use=opennt-w,
9534 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
9535 lines#60, use=opennt-w,
9537 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
9538 cols#132, use=opennt,
9540 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
9541 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
9542 rmcup@, smcup@, use=opennt,
9544 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
9545 lines#35, use=opennt-nti,
9547 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
9548 lines#50, use=opennt-nti,
9550 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
9551 lines#60, use=opennt-nti,
9553 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
9554 lines#100, use=opennt-nti,
9556 ######## COMMON TERMINAL TYPES
9558 # This section describes terminal classes and maker brands that are still
9559 # quite common, but have proprietary command sets not blessed by ANSI.
9564 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
9565 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
9566 # Acer has a web site at http://www.acer.com.
9568 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
9569 # His comments suggest they were shipped with the system.
9572 # (altos2: had extension capabilities
9573 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9574 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9575 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9576 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9577 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9578 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
9579 # :HL=^AP\r:SP=\E[i:\
9580 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
9581 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
9582 # Comparison with the k* capabilities makes it obvious that the c* things are
9583 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
9584 # :sr: was given as a boolean-- esr)
9585 altos2|alt2|altos-2|Altos II,
9586 cols#80, it#8, lines#24, xmc#0,
9587 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
9588 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
9589 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
9590 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
9591 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
9592 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
9593 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
9594 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9595 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9596 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9597 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9598 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
9599 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
9600 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
9601 # (altos3: had extension capabilities
9602 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9603 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9604 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9605 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9606 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9607 # :HL=^AP\r:SP=\E[i:\
9608 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
9609 altos3|altos5|alt3|alt5|altos-3|altos-5|Altos III or V,
9610 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
9611 altos4|alt4|altos-4|Altos IV,
9613 # (altos7: had extension capabilities:
9614 # :GG#0:GI=\EH8:GF=\EH7:\
9615 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9616 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9617 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9618 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9619 # Comparison with the k* capabilities makes it obvious that the c* things are
9620 # shift keys. I have renamed them to keys 32 and up accordingly. I have
9621 # also made this entry relative to adm12 in order to give it an <sgr>. The
9622 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
9623 altos7|alt7|Altos VII,
9625 cols#80, lines#24, xmc#0,
9626 acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt,
9627 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9628 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9629 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
9631 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
9632 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
9633 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
9634 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9635 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9636 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9637 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9638 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
9639 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
9640 rmir=\Er, smir=\Eq, use=adm+sgr,
9641 altos7pc|alt7pc|Altos PC VII,
9642 kend=\ET, use=altos7,
9644 #### Hewlett-Packard (hp)
9647 # 8000 Foothills Blvd
9648 # Roseville, CA 95747
9649 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
9650 # 1-(800)-633-3600 (General customer support)
9653 # As of March 1998, HP no longer has any terminals in production.
9654 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
9655 # supported (they still have parts). So are the 2392a and 2394a.
9656 # See the WORKSTATION CONSOLES section for the 700s.
9659 # Generic HP terminal - this should (hopefully) work on any HP terminal.
9660 hpgeneric|hp|Hewlett-Packard generic terminal,
9661 OTbs, OTpt, am, da, db, mir, xhp,
9662 cols#80, lines#24, lm#0, vt#6,
9663 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9664 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
9665 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
9666 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
9667 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
9670 hp110|Hewlett-Packard model 110 portable,
9671 lines#16, use=hpgeneric,
9673 hp+pfk+cr|HP function keys with CR,
9674 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
9675 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
9677 hp+pfk-cr|HP function keys w/o CR,
9678 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
9681 # The hp2621s use the same keys for the arrows and function keys,
9682 # but not separate escape sequences. These definitions allow the
9683 # user to use those keys as arrow keys rather than as function
9685 hp+pfk+arrows|HP alternate arrow definitions,
9686 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
9687 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
9688 kll=\Eq\r, kri=\Es\r,
9690 hp+arrows|HP arrow definitions,
9691 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9692 kind=\ES, kll=\EF, kri=\ET,
9694 # Generic stuff from the HP 262x series
9696 hp262x|HP 262x terminals,
9698 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
9699 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9700 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9701 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
9702 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9703 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9704 %;%?%p4%t%{65}%|%;%c,
9705 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
9707 # Note: no <home> on HPs since that homes to top of memory, not screen.
9708 # Due to severe 2621 braindamage, the only way to get the arrow keys to
9709 # transmit anything at all is to turn on the function key labels
9710 # with <smkx>, and even then the user has to hold down shift!
9711 # The default 2621 turns off the labels except when it has to to
9712 # enable the function keys. If your installation prefers labels
9713 # on all the time, or off all the time (at the "expense" of the
9714 # function keys), use 2621-nl or 2621-wl.
9716 # Note: there are newer ROMs for 2621's that allow you to set
9717 # strap A so the regular arrow keys xmit \EA, etc, as with the
9718 # 2645. However, even with this strap set, the terminal stops
9719 # xmitting if you reset it, until you unset and reset the strap!
9720 # Since there is no way to set/unset the strap with an escape
9721 # sequence, we don't use it in the default.
9722 # If you like, you can use 2621-ba (brain-damaged arrow keys).
9723 hp2621-ba|HP 2621 w/new rom and strap A set,
9724 rmkx@, smkx@, use=hp+arrows, use=hp2621,
9726 # hp2621 with function labels. Most of the time they are off,
9727 # but inside vi, the function key labels appear. You have to
9728 # hold down shift to get them to xmit.
9729 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|HP 2621 w/labels,
9730 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
9734 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
9735 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
9736 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
9737 use=hp+pfk+cr, use=hpgeneric,
9739 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
9740 hp2621p|HP 2621 with printer,
9741 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
9743 hp2621p-a|HP 2621p with fn as arrows,
9744 use=hp+pfk+arrows, use=hp2621p,
9746 # hp2621 with k45 keyboard
9747 hp2621-k45|hp2621k45|k45|HP 2621 with 45 keyboard,
9748 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9749 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
9751 # 2621 using all 48 lines of memory, only 24 visible at any time.
9752 hp2621-48|HP 48 line 2621,
9754 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
9757 # 2621 with no labels ever. Also prevents vi delays on escape.
9758 hp2621-nl|HP 2621 with no labels,
9759 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
9762 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
9765 hp2621-nt|HP 2621 w/no tabs,
9768 # Hp 2624 B with 4 or 10 pages of memory.
9770 # Some assumptions are made with this entry. These settings are
9771 # NOT set up by the initialization strings.
9773 # Port Configuration
9778 # Terminal Configuration
9784 # Note: the 2624 DOES have a true <home>, believe it or not!
9786 # The 2624 has an "error line" to which messages can be sent.
9787 # This is CLOSE to what is expected for a "status line". However,
9788 # after a message is sent to the "error line", the next carriage
9789 # return is EATEN and the "error line" is turned back off again!
9790 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
9792 # This entry supports emacs (and any other program that uses raw
9793 # mode) at 4800 baud and less. I couldn't get the padding right
9796 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
9797 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
9800 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
9802 # This hp2626 entry does not use any of the fancy windowing stuff
9805 # Indeed, terminfo does not yet handle such stuff. Since changing
9806 # any window clears memory, it is probably not possible to use
9807 # this for screen opt.
9809 # ed is incredibly slow most of the time - I am guessing at the
9810 # exact padding. Since the terminal uses xoff/xon this is intended
9811 # only for cost computation, so that the terminal will prefer el
9812 # or even dl1 which is probably faster!
9814 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
9815 # extra slow on the last line of the window.
9817 # The padding probably should be changed.
9819 hp2626|hp2626a|hp2626p|HP 2626,
9822 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
9823 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
9824 use=hp+labels, use=scrhp,
9826 # This entry is for sysline. It allocates a 23 line window with
9827 # a 115 line workspace for regular use, and a 1 line window for
9830 # This assumes port 2 is being used.
9831 # Turn off horizontal line, Create ws #1 with 115 lines,
9832 # Create ws #2 with 1 line, Create window #1 lines 1-23,
9833 # Create window #2 lines 24-24, Attach cursor to workspace #1.
9834 # Note that this clears the tabs so it must be done by tset before
9837 hp2626-s|HP 2626 using only 23 lines,
9840 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
9841 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
9842 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
9843 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
9844 # Force terminal back to 24 lines after being 23.
9845 hp2626-ns|HP 2626 using all 24 lines,
9846 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
9847 \s\E&w3f2I\s\E&w7f2p1I\s\r,
9849 # Various entries useful for small windows on 2626.
9850 hp2626-12|Hewlett-Packard 2626 12 lines,
9851 lines#12, use=hp2626,
9852 hp2626-12x40|Hewlett-Packard 2626 12 lines 40 columns,
9853 cols#40, lines#12, use=hp2626,
9854 hp2626-x40|Hewlett-Packard 2626 40 columns,
9855 cols#40, use=hp2626,
9856 hp2626-12-s|Hewlett-Packard 2626 11 lines plus status,
9857 lines#11, use=hp2626-s,
9860 # hp2627 color tubes from University of Wisconsin
9862 hp2627a-rev|HP 2627 with reverse video colors,
9863 cr=\r, cud1=\n, ht=^I, ind=\n,
9864 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
9866 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
9867 smul=\E&dD\E&v1S, use=hp2621-nl,
9868 hp2627a|HP 2627 color terminal with no labels,
9869 cr=\r, cud1=\n, ht=^I, ind=\n,
9870 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
9871 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
9872 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
9874 hp2627c|HP 2627 color (cyan) terminal with no labels,
9875 cr=\r, cud1=\n, ht=^I, ind=\n,
9876 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
9877 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
9879 # hp2640a doesn't have the Y cursor addressing feature, and C is
9880 # memory relative instead of screen relative, as we need.
9883 cup@, rmkx@, smkx@, use=hp2645,
9885 hp2640b|hp2644a|HP 264x series,
9886 rmkx@, smkx@, use=hp2645,
9888 # (hp2641a: removed unknown :gu: -- esr)
9889 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
9890 am, da, db, mir, xhp,
9892 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9893 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
9894 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
9895 if=/usr/share/tabset/std, il1=\EL, ind=\n,
9896 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9897 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9900 # This terminal should be used at 4800 baud or less. It needs padding for
9901 # plain characters at 9600, I guessed at an appropriate cr delay. It really
9902 # wants ^E/^F handshaking, but that doesn't work well even if you write
9903 # software to support it.
9904 hp2645|hp45|HP 2645 series,
9906 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
9907 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9908 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
9909 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
9911 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9912 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
9913 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
9914 # You should use this terminal at 4800 baud or less.
9915 hp2648|hp2648a|HP 2648a graphics terminal,
9916 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
9917 dch1=\EP$<7>, ip=$<5>, use=hp2645,
9919 # The HP 150 terminal is a fairly vanilla HP terminal, with the
9920 # clreol standout problem. It also has graphics capabilities and
9921 # a touch screen, which we don't describe here.
9922 hp150|Hewlett Packard Model 150,
9925 # HP 2382a terminals, "the little ones." They don't have any
9926 # alternate character set support and sending out ^N/^O will
9927 # leave the screen blank.
9928 hp2382a|hp2382|Hewlett Packard 2382a,
9932 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9935 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9936 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9937 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9939 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
9941 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
9942 use=hp+pfk+arrows, use=hp2621-fl,
9944 # newer hewlett packard terminals
9946 newhpkeyboard|generic entry for HP extended keyboard,
9947 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9948 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9949 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
9950 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
9953 newhp|generic entry for new Hewlett Packard terminals,
9954 am, bw, mir, xhp, xon,
9955 cols#80, lines#24, pb#4800,
9956 acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn
9958 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
9959 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
9960 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
9961 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
9962 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
9963 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
9964 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
9965 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
9966 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9967 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9968 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9969 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
9970 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
9971 tbc=\E3, use=newhpkeyboard,
9973 memhp|memory relative addressing for new HP ttys,
9975 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
9976 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
9977 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
9978 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
9980 scrhp|screen relative addressing for new HP ttys,
9981 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
9982 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
9983 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
9984 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
9985 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
9987 # (hp+labels: added label values from a BRL termcap -- esr)
9988 hp+labels|"standard" label info for new HP ttys,
9990 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
9991 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9993 rmln=\E&j@, smln=\E&jB,
9995 hp+printer|"standard" printer info for HP ttys,
9996 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
9999 # The new hp2621b is kind of a cross between the old 2621 and the
10000 # new 262x series of machines. It has dip-switched options.
10001 # The firmware has a bug in it such that if you give it a null
10002 # length label, the following character is eaten!
10003 hp2621b|HP 2621b with old style keyboard,
10004 lh#1, lm#48, lw#8, nlab#8,
10005 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
10006 kind=\ET, kll=\EF, kri=\ES,
10007 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
10008 %;%p2%s\E%{111}%p1%+%c\r,
10009 smln=\E&jB, use=hp2621,
10011 hp2621b-p|HP 2621b with printer,
10012 use=hp+printer, use=hp2621b,
10014 # hp2621b - new 2621b with new extended keyboard
10015 # these are closer to the new 26xx series than the other 2621b
10016 hp2621b-kx|HP 2621b with extended keyboard,
10017 use=newhpkeyboard, use=hp2621b,
10019 hp2621b-kx-p|HP 2621b with new keyboard & printer,
10020 use=hp+printer, use=hp2621b-kx,
10022 # Some assumptions are made in the following entries.
10023 # These settings are NOT set up by the initialization strings.
10025 # Port Configuration
10026 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
10028 # Terminal Configuration
10029 # InhHndShk(G)=Yes InhDC2(H)=Yes
10030 # XmitFnctn(A)=No InhEolWrp=No
10033 # Hp 2622a & hp2623a display and graphics terminals
10035 hp2622|hp2622a|HP 2622,
10038 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
10040 # The 2623 is a 2622 with extra graphics hardware.
10041 hp2623|hp2623a|HP 2623,
10044 hp2624b-p|hp2624b-4p-p|Hewlett Packard 2624 B with printer,
10045 use=hp+printer, use=hp2624,
10047 # The hewlett packard B can have an optional extra 6 pages of memory.
10048 hp2624-10p|hp2624a-10p|hp2624b-10p|Hewlett Packard 2624 B w/ 10 pages of memory,
10049 lm#240, use=hp2624,
10051 hp2624b-10p-p|Hewlett Packard 2624 B w/ extra memory & printer,
10052 lm#240, use=hp2624b-p,
10054 # Color manipulations for HP terminals
10055 hp+color|HP with colors,
10057 colors#16, ncv#17, pairs#7,
10058 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10059 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10060 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10061 %t1%e.%p7%d%;z%p1%dI,
10062 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10063 I\E&v1b1c6I\E&v1x1y7I,
10064 op=\E&v0S, scp=\E&v%p1%dS,
10066 # <is2> sets the screen to be 80 columns wide
10067 hp2397a|hp2397|Hewlett Packard 2397A color terminal,
10068 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
10070 # HP 700/44 Setup parameters:
10071 # Terminal Mode HP-PCterm
10072 # Inhibit Auto Wrap NO
10073 # Status Line Host Writable
10074 # PC Character Set YES
10075 # Twenty-Five Line Mode YES
10076 # XON/XOFF @128 or 64 (sc)
10077 # Keycode Mode NO or YES (sc)
10078 # Backspace Key BS or BS/DEL
10080 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
10081 # \E\\? does not turn off keycode mode
10082 # <smsc> sets alternate start/stop; keycode on
10083 hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode,
10086 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
10088 bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub1=\E[D,
10089 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10090 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10091 ich1=\E[@, il1=\E[L, ind=\n,
10092 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
10093 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10094 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
10095 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
10096 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
10097 kpp=\E[5~, rmam=\E[?7l,
10098 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
10099 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
10100 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
10101 smul=\E[4m, xoffc=g, xonc=e, use=vt220+cvis,
10103 # (hp2392: copied <rmir> here from hpex -- esr)
10104 hp2392|239x series,
10106 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
10107 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
10108 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
10109 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
10112 hpsub|HP terminals -- capability subset,
10113 am, da, db, mir, xhp, xon,
10115 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10116 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
10117 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
10118 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
10119 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
10120 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
10123 # May be used for most 24 x 80 hp terminals,
10124 # but has no padding added, so may allow runover in some terminals at high
10125 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
10126 # hp98x5 terminal emulators or hp98x6 consoles.
10127 # Adds xy-cursor addressing, vertical cursor addressing, home,
10128 # last line, and underline capabilities.
10130 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
10131 # moved <rmir> here from hpsub -- esr)
10132 hpex|HP extended capabilities,
10133 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
10134 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
10135 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
10137 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
10138 hp2|hpex2|Hewlett-Packard extended capabilities newer version,
10139 am, da, db, mir, xhp,
10140 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
10141 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10142 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10143 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10144 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10145 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10146 knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10147 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10148 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10149 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10150 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
10151 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
10152 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
10153 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
10154 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
10155 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
10156 use=hp+pfk-cr, use=hp+arrows,
10159 # From: <ddavis@ic.berkeley.edu>
10160 hp236|hp236 internal terminal emulator,
10163 clear=\EF, cnorm=\EDE, cub1=^H,
10164 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
10165 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
10166 sgr0=\ECI, smso=\EBI,
10168 # This works on a hp300 console running Utah 4.3 BSD
10169 # From: Craig Leres <leres@okeeffe.berkeley.edu>
10170 hp300h|HP Catseye console,
10171 OTbs, am, da, db, mir, xhp,
10172 cols#128, lines#51, lm#0, xmc#0,
10173 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10174 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10175 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10176 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
10177 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
10178 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
10179 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
10181 # From: Greg Couch <gregc@ernie.berkeley.edu>
10182 hp9837|hp98720|hp98721|HP 9000/300 workstations,
10183 OTbs, am, da, db, mir, xhp,
10184 cols#128, it#8, lines#46, lm#0,
10185 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
10186 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10187 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10188 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
10189 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
10190 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
10191 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
10192 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
10193 tbc=\E3, vpa=\E&a%p1%dY,
10194 # HP 9845 desktop computer from BRL
10195 # (hp9845: removed unknown capability :gu: -- esr)
10197 OTbs, am, da, db, eo, mir, xhp,
10199 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
10200 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
10201 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
10202 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
10203 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
10204 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
10205 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
10206 hp98550|hp98550a|HP 9000 Series 300 color console,
10207 OTbs, am, da, db, mir, xhp,
10208 cols#128, it#8, lines#49, lm#0,
10209 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
10210 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10211 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
10212 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10213 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
10214 kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10215 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10216 kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER,
10217 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N,
10218 smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10219 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
10221 # From: Martin Trusler
10222 hp98550-color|hp98550a-color|HP 9000 Series 300 color console (Trusler),
10223 OTbs, am, ccc, da, db, km, mir, xhp,
10224 colors#8, cols#128, it#8, lh#2, lines#49, lm#0, lw#8, nlab#8,
10226 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
10227 u+v+w+x|y<z>{*|!}\273~\362,
10228 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
10229 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10230 dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\E&a0y0C,
10231 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\ES,
10232 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10233 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10234 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10235 %t1%e.%p7%d%;z%p1%dI,
10236 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10237 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10238 kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10239 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10240 I\E&v1b1c6I\E&v1x1y7I,
10241 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10242 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10243 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10244 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
10245 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
10246 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
10248 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%{64}%+%c%?%p9%t%'
10249 \016'%c%e%'\017'%c%;,
10250 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
10251 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
10252 smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea,
10253 u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY,
10254 use=hp+pfk-cr, use=hp+arrows,
10256 # From: Victor Duchovni <vic@fine.princeton.edu>
10257 # (hp700-wy: removed obsolete ":nl=^J:";
10258 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
10259 hp700-wy|HP 700/41 emulating Wyse30,
10260 OTbs, am, bw, mir, msgr,
10261 cols#80, it#8, lines#24, xmc#1,
10262 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10263 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10264 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
10265 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
10266 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
10267 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
10268 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
10269 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
10270 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
10271 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
10272 hp70092|hp70092a|hp70092A|HP 700/92,
10274 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
10275 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
10276 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
10277 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10278 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10279 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10280 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10281 kll=\EF, knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dB,
10282 ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@,
10283 rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ,
10284 smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10285 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
10287 bobcat|sbobcat|HP 9000 model 300 console,
10288 am, da, db, mir, xhp,
10289 cols#128, it#8, lines#47, xmc#0,
10290 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10291 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
10292 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
10293 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10294 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
10295 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
10296 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
10297 gator-t|HP 9000 model 237 emulating extra-tall AAA,
10298 lines#94, use=gator,
10299 gator|HP 9000 model 237 emulating AAA,
10301 cols#128, it#8, lines#47,
10302 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
10303 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
10304 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
10305 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
10306 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
10307 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
10308 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
10309 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10310 gator-52|HP 9000 model 237 emulating VT52,
10311 cols#128, lines#47, use=vt52-basic,
10312 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
10313 lines#94, use=gator-52,
10315 #### Honeywell-Bull
10317 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
10320 # Honeywell Bull terminal. Its cursor and function keys send single
10321 # control characters and it has standout/underline glitch. Most programs
10322 # do not like these features/bugs. Visual bell is realized by flashing the
10323 # "keyboard locked" LED.
10324 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
10326 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
10327 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
10328 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
10329 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
10330 dku7003|Honeywell Bull DKU 7003 all features described,
10333 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
10334 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10337 #### Lear-Siegler (LSI adm)
10339 # These guys are long since out of the terminals business, but
10340 # in 1995 many current terminals still have an adm type as one of their
10341 # emulations (usually their stupidest, and usually labeled adm3, though
10342 # these `adm3' emulations normally have adm3a+ capabilities).
10344 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
10345 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
10346 # was being held to ground would trigger a send of the top line on the screen.
10347 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
10348 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
10349 # for clearing up this point.)
10351 adm1a|adm1|LSI adm1a,
10354 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10355 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
10360 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10361 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10362 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
10363 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10364 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
10368 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
10369 # The following ADM-3A switch settings are assumed for normal operation:
10370 # SPACE U/L_DISP CLR_SCRN 24_LINE
10371 # CUR_CTL LC_EN AUTO_NL FDX
10372 # Other switches may be set for operator convenience or communication
10373 # requirements. I recommend
10374 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
10376 # Most of these terminals required an option ROM to support lower case display.
10377 # Open the case and look at the motherboard; if you see an open 24-pin DIP
10378 # socket, you may be out of luck.
10380 # (adm3a: some capabilities merged in from BRl entry -- esr)
10384 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
10385 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10386 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
10390 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
10393 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
10394 rmso=\EG, smso=\EG, use=adm3a+,
10395 # A lot of terminals other than adm11s use these. Wherever you see
10396 # use=adm+sgr with some of its capabilities disabled, try the
10397 # disabled ones. They may well work but not have been documented or
10398 # expressed in the using entry. We'd like to cook up an <sgr> but the
10399 # <rmacs>/<smacs> sequences of the using entries vary too much.
10400 adm+sgr|adm style highlight capabilities,
10401 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
10402 smso=\EG4, smul=\EG8,
10403 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
10404 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
10405 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
10406 # be ^Z, according to his entry.
10407 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
10408 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
10411 OTkn#8, cols#80, lines#24,
10412 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
10413 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10414 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
10415 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10416 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10417 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
10419 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
10420 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
10421 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
10422 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
10423 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
10424 # via BRL. That entry asserted <xmc#1>, but I've left that out because
10425 # neither earlier nor later ADMSs have it -- esr)
10427 # You will need to get into the supervisor setup before you can set
10428 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
10429 # see a lot more setup options.
10431 # While in supervisor setup you can also use following codes:
10433 # Ctrl-P Personality character selections (configure for example what
10434 # arrow keys send, if I recall correctly)
10435 # Ctrl-T tabs 1-80 use left&right to move and up to set and
10436 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
10437 # Ctrl-B Binary setup (probably not needed. I think that everything can
10438 # be set using normal setup)
10439 # Ctrl-A Answerback mode (enter answerback message)
10440 # Ctrl-U User friendly mode (normal setup)
10441 # Ctrl-D Defaults entire setup and function keys from EPROM tables
10442 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
10443 # Ctrl-R Reads both setup and functions keys from NVM.
10444 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
10446 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
10447 # RTS/CTS used nowadays with virtually every modem and computer. 19200
10448 # bps works fine with hardware flow control.
10450 # The following null-modem cable should fix this and enable you to use
10451 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
10452 # set ADM-12+ for DTR handshaking from supervisor setup.
10454 # PC Serial ADM-12+
10465 OTbs, OTpt, am, mir,
10466 OTug#1, cols#80, it#8, lines#24,
10467 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10469 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
10470 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
10471 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
10472 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
10473 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10474 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10475 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
10477 # (adm20: removed obsolete ":kn#7:" -- esr)
10478 adm20|Lear Siegler adm20,
10480 cols#80, it#8, lines#24,
10481 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
10482 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
10483 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
10484 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
10485 sgr0=\E(, smso=\E),
10486 adm21|Lear Siegler adm21,
10488 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
10489 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
10490 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10491 use=adm+sgr, use=adm3a,
10492 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
10493 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
10494 # removed bogus-looking \200 from before <cup>. -- esr)
10498 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10499 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10500 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
10501 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
10503 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10504 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10505 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10506 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
10507 # ADM 31 DIP Switches
10509 # This information comes from two versions of the manual for the
10510 # Lear-Siegler ADM 31.
10514 # +-||||-------------------------------------+
10529 # +----------------------------------------------+
10530 # front of case (keyboard)
10532 # S1 - Data Rate - Modem
10533 # S2 - Data Rate - Printer
10534 # ------------------------
10535 # Data Rate Setting
10536 # -------------------
10554 # S3 - Interface/Printer/Attributes
10555 # ---------------------------------
10556 # Printer Busy Control
10559 # off off off Busy not active, CD disabled
10560 # off off on Busy not active, CD enabled
10561 # off on off Busy active on J5-20, CD disabled
10562 # on off off Busy active on J5-19, CD disabled - Factory Set.
10563 # on off on Busy active on J5-19, CD enabled
10565 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
10567 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
10569 # sw6 ON enables printer BUSY active LOW - Factory Setting
10570 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
10572 # sw7 ON - steady cursor - Factory Setting
10573 # OFF - blinking cursor
10575 # sw8 ON causes selected attribute character to be displayed
10576 # OFF causes SPACE to be displayed instead - Factory Setting
10582 # sw4 sw1 sw2 sw3 sw4
10583 # ---------------------------
10584 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
10585 # Current Loop disabled - Factory Setting
10586 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
10588 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
10589 # Current Loop Disabled
10591 # sw5 ON disables dot stretching mode - Factory Setting
10592 # OFF enables dot stretching mode
10593 # sw6 ON enables blanking function
10594 # OFF enables underline function - Factory Setting
10595 # sw7 ON causes NULLS to be displayed as NULLS
10596 # OFF causes NULLS to be displayed as SPACES - Factory Setting
10598 # S5 - Word Structure
10599 # -------------------
10600 # sw1 ON enables BREAK key - Factory Setting
10601 # OFF disables BREAK key
10602 # sw2 ON selects 50Hz monitor refresh rate
10603 # OFF selects 60Hz monitor refresh rate - Factory Setting
10605 # Modem Port Selection
10608 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
10609 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
10610 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
10611 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
10612 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
10613 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
10614 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
10615 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
10617 # sw6 ON sends bit 8 a 1 (mark)
10618 # OFF sends bit 8 as 0 (space) - Factory Setting
10619 # sw7 ON selects Block Mode
10620 # OFF selects Conversation Mode - Factory Setting
10621 # sw8 ON selects Full Duplex operation
10622 # OFF selects Half Duplex operation - Factory Setting
10626 # sw1, sw2, sw6, sw7 Reserved - Factory 0
10628 # Printer Port Selection
10629 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
10631 # sw8 ON enables Printer Port
10632 # OFF disables Printer Port - Factory Setting
10634 # S7 - Polling Address
10635 # --------------------
10636 # sw1-7 Establish ASCII character which designates terminal polling address
10638 # OFF = logic 1 - Factory Setting
10639 # sw8 ON enables Polling Option
10640 # OFF disables Polling Option - Factory Setting
10643 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
10645 # This adm31 entry uses underline as the standout mode.
10646 # If the adm31 gives you trouble with standout mode, check the DIP switch in
10647 # position 6, bank @c11, 25% from back end of the circuit board. Should be
10648 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
10649 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
10650 adm31|LSI adm31 with sw6 set for underline mode,
10653 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10654 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10655 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
10656 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10657 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10658 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
10659 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
10660 adm31-old|o31|old adm31,
10661 rmul@, smso=\EG4, smul@, use=adm31,
10662 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
10666 if=/usr/share/tabset/vt100,
10667 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
10668 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
10672 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10673 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10674 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
10675 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
10676 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
10677 smir=\Eq, smul@, use=adm+sgr,
10678 # The following termcap for the Lear Siegler ADM-42 leaves the
10679 # "system line" at the bottom of the screen blank (for those who
10680 # find it distracting otherwise)
10681 adm42-ns|LSI adm-42 with no system line,
10682 cbt=\EI\EF \011, clear=\E;\EF \011,
10683 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
10684 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
10685 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
10686 smir=\Eq\EF \011, use=adm42,
10687 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
10688 # The insert mode of this terminal is commented out because it's broken for our
10689 # purposes in that it will shift the position of every character on the page,
10690 # not just the cursor line!
10691 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
10692 adm1178|1178|LSI adm1178,
10694 cols#80, lines#24, xmc#1,
10695 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
10696 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10697 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
10698 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
10699 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
10700 sgr0=\E), smso=\EG4, smul=\EG1,
10704 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
10705 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
10706 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
10708 # ComputerVision Services
10709 # 500 Old Connecticut Path
10710 # Framingham, Mass.
10713 # Standout mode is dim reverse-video.
10714 pt100|pt200|wren|fenix|Prime pt100/pt200,
10716 cols#80, it#8, lines#24,
10717 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
10718 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
10719 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
10720 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
10721 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
10722 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
10723 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
10724 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
10726 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
10728 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
10729 pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode,
10731 cup=\E[%i%p1%d;%p2%dH, use=pt100,
10733 rmso@, smso@, use=pt100,
10734 pt250w|Prime PT250 in 132-column mode,
10735 rmso@, smso@, use=pt100w,
10740 # 3475-A North 1st Street
10741 # San Jose CA 95134
10742 # Vox: (800)-457-4447
10743 # Fax: (408)-473-1510
10744 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
10746 # Qume was bought by Wyse, but still (as of early 1995) has its own support
10747 # group and production division.
10749 # Discontinued Qume models:
10751 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
10752 # built to replace them, and a qvt119+ which was a 101+ with available wide
10753 # mode (132 columns). There was a qvt103 which added VT100/VT131 emulations
10754 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
10755 # ANSI-compatible terminals with the qvt323 and qvt61.
10757 # Current Qume models (as of February 1995):
10759 # All current Qume terminals have ANSI-compatible operation modes.
10760 # Qume is still producing the qvt62, which features emulations for other
10761 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
10762 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
10763 # with many emulations including Wyse370, Wyse 325, etc. Their newest
10764 # model is the qvt520, which is VT420-compatible.
10766 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
10768 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
10769 # setup mode. Shift-s should be a configuration save to NVRAM.
10771 qvt101|qvt108|Qume qvt 101 and QVT 108,
10772 xmc#1, use=qvt101+,
10774 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
10775 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
10776 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
10777 # What seems to be going on here is that this entry was designed so that
10778 # the normal highlight is bold and standout is dim plus something else
10779 # (reverse-video maybe? But then, are there two <rev> sequences?)
10781 # Added kdch1, kil1, kdl1 based on screenshot -TD:
10782 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
10783 qvt101+|qvt101p|Qume qvt 101 PLUS product,
10785 cols#80, lines#24, xmc#0,
10786 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
10787 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10788 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10789 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10790 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
10791 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10792 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
10793 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10794 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
10795 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10796 qvt102|Qume qvt 102,
10797 cnorm=\E., use=qvt101,
10798 # (qvt103: added <rmam>/<smam> based on init string -- esr)
10799 qvt103|Qume qvt 103,
10801 cols#80, it#8, lines#24, vt#3,
10802 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10803 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
10804 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
10805 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
10806 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
10807 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
10808 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10809 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
10810 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
10811 rmso=\E[m$<2>, rmul=\E[m$<2>,
10812 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
10813 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
10815 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
10816 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10817 qvt103-w|Qume qvt103 132 cols,
10818 cols#132, lines#24,
10819 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
10820 qvt119+|qvt119p|qvt119|Qume qvt 119 and 119PLUS terminals,
10822 cols#80, lines#24, xmc#0,
10823 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
10824 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10825 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
10826 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
10827 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
10828 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
10829 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10830 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10831 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
10832 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10833 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
10834 lines#25, use=qvt119+,
10835 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
10837 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
10838 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
10839 lines#25, use=qvt119+,
10840 qvt203|qvt203+|Qume qvt 203 Plus,
10841 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
10842 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
10843 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
10844 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
10845 qvt203-w|qvt203-w-am|Qume qvt 203 PLUS in 132 cols (w/advanced video),
10846 cols#132, lines#24,
10847 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
10849 # Since a command is present for enabling 25 data lines,
10850 # a specific terminfo entry may be generated for the 203.
10851 # If one is desired for the QVT 119 PLUS then 25 lines must
10852 # be selected in the status line (setup line 9).
10854 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
10856 is2=\E[=40h\E[?3l, use=qvt203,
10857 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
10858 cols#132, lines#25,
10859 rs2=\E[?3h\E[=40h, use=qvt203,
10861 #### TeleVideo (tvi)
10864 # 550 East Brokaw Road
10865 # PO Box 49048 95161
10866 # San Jose CA 95112
10867 # Vox: (408)-954-8333
10868 # Fax: (408)-954-0623
10871 # These require incredible amounts of padding.
10873 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
10874 # TeleVideo terminals are ANSI and PC-ANSI compatible.
10876 tvi803|TeleVideo 803,
10877 clear=\E*$<10>, use=tvi950,
10879 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
10880 # Switch settings are:
10901 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
10917 # U do CR/LF when CR received
10918 # D do CR when CR received
10940 # S2 6 Cursor down key
10944 # S2 7 Screen colour
10948 # S2 8 DSR status (pin 6)
10952 # S2 9 DCD status (pin 8)
10956 # S2 10 DTR status (pin 20)
10959 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
10960 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
10961 tvi910|TeleVideo model 910,
10963 cols#80, it#8, lines#24, xmc#1,
10964 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10965 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
10966 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
10967 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
10968 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
10969 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10970 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10971 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
10972 # From: Alan R. Rogers <rogers%albany@csnet-relay>
10973 # as subsequently hacked over by someone at SCO
10974 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
10976 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
10979 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
10980 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
10981 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
10982 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
10985 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
10986 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
10987 # D U D D 8O1 D U U U 8E2
10989 # S1 9 Autowrap (U = on, D = off)
10990 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
10991 # S2 1 Mode (U = block, D = conversational)
10992 # S2 2 Duplex (U = half, D = full)
10993 # S2 3 Hertz (U = 50, D = 60)
10994 # S2 4 Edit mode (U = local, D = duplex)
10995 # S2 5 Cursor type (U = underline, D = block)
10996 # S2 6 Cursor down key (U = send ^J, D = send ^V)
10997 # S2 7 Screen colour (U = green on black, D = black on green)
10998 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
10999 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
11000 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
11002 tvi910+|TeleVideo 910+,
11003 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
11004 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
11005 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
11006 ll=\E=7\s, use=tvi910,
11008 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
11009 # <khome> from BRL entry -- esr)
11010 tvi912|tvi914|tvi920|TeleVideo 912/914/920 (old),
11011 OTbs, OTpt, am, msgr,
11012 cols#80, it#8, lines#24, xmc#1,
11013 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11014 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11015 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
11016 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
11017 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11018 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11019 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11020 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
11022 # We got some new tvi912c terminals that act really weird on the regular
11023 # termcap, so one of our gurus worked this up. Seems that cursor
11024 # addressing is broken.
11025 tvi912cc|tvi912 at Cowell College,
11028 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
11029 # From: Benjamin C. W. Sittler
11031 # Someone has put a scanned copy of the manual online at:
11032 # http://vt100.net/televideo/912b-om/
11033 # (https://vt100.net/manx/details/6,5484)
11035 # These terminals were produced ca. 1979, and had a 12" monochrome
11036 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
11037 # ASCII, and were generally similar to adm3a but with attributes
11038 # (including some with magic cookies), fancy half-duplex mode, and
11041 # Some operations require truly incredible amounts of padding. The
11042 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
11043 # are so slow as to be nearly unusable.
11045 # There may or may not have been a separate, earlier series of 912/920
11046 # terminals (without the "B" and "C" suffix); I have never seen one,
11047 # and the manual only describes the "B" and "C" series. The 912 and 920
11048 # are quite distinct from the 914 and 924, which were much nicer non-
11049 # magic-cookie terminals similar to the 950.
11051 # This is a new description for the following TeleVideo terminals,
11052 # distinguished chiefly by their keyboards:
11054 # TVI-912B - very odd layout, no function keys (84 keys)
11055 # TVI-920B - typewriter layout, no function keys (103 keys)
11056 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
11057 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
11059 # To choose a setting for the TERM variable, start with the model:
11061 # Model || base name
11062 # ----------||-----------
11063 # TVI-912B || tvi912b
11064 # TVI-912C || tvi912c
11065 # TVI-920B || tvi920b
11066 # TVI-920C || tvi920c
11068 # Then add a suffix from the following table describing installed options
11069 # and how you'd like to use the terminal:
11071 # Use Video | Second | Visual | Magic | Page || feature
11072 # Attributes | Page | Bell | Cookies | Print || suffix
11073 # ------------|--------|--------|---------|-------||---------
11074 # No | No | N/A | N/A | No || -unk
11075 # No | No | N/A | N/A | Yes || -p
11076 # No | Yes | No | N/A | No || -2p-unk
11077 # No | Yes | No | N/A | Yes || -2p-p
11078 # No | Yes | Yes | N/A | No || -vb-unk
11079 # No | Yes | Yes | N/A | Yes || -vb-p
11080 # Yes | No | N/A | No | N/A ||
11081 # Yes | No | N/A | Yes | N/A || -mc
11082 # Yes | Yes | No | No | N/A || -2p
11083 # Yes | Yes | No | Yes | N/A || -2p-mc
11084 # Yes | Yes | Yes | No | N/A || -vb
11085 # Yes | Yes | Yes | Yes | N/A || -vb-mc
11087 # So e.g. a model 920 C with second page memory option, visual bell
11088 # and no magic cookies would be tvi920c-vb; a model 912 B without the
11089 # second page memory option and using magic cookies would be
11094 # At 9600 baud, the terminal is prone to overflow its input buffer
11095 # during complex operations (insert/delete
11096 # character/line/screen/page), and it does not signal this over the
11097 # RS232 cable. The typical symptom of an overrun is that the terminal
11098 # starts beeping, and output becomes garbled.
11100 # The padding delays in this terminfo were derived using tack(1)
11101 # running on a Linux box connected to a TVI-920C with a later-model
11102 # (A49C1-style) ROM running at 9600 baud, so your mileage may
11103 # vary. The numbers below seem to give the terminal enough time so
11104 # that it doesn't overflow its input buffer and start losing
11109 # If you want to use the FUNCT key on a tvi912[bc], use the
11110 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
11111 # the following table (these also work on the 920 series):
11113 # Unshifted Function Keys:
11115 # Key | capname|| Equivalent
11116 # -----|--------||------------
11117 # F1 | <kf1> || FUNCT + @
11118 # F2 | <kf2> || FUNCT + A
11119 # F3 | <kf3> || FUNCT + B
11120 # F4 | <kf4> || FUNCT + C
11121 # F5 | <kf5> || FUNCT + D
11122 # F6 | <kf6> || FUNCT + E
11123 # F7 | <kf7> || FUNCT + F
11124 # F8 | <kf8> || FUNCT + G
11125 # F9 | <kf9> || FUNCT + H
11126 # F10 | <kf10> || FUNCT + I
11127 # F11 | <kf11> || FUNCT + J
11129 # Shifted Function Keys:
11131 # SHIFT + Key | capname|| Equivalent
11132 # -------------|--------||------------
11133 # SHIFT + F1 | <kf12> || FUNCT + `
11134 # SHIFT + F2 | <kf13> || FUNCT + a
11135 # SHIFT + F3 | <kf14> || FUNCT + b
11136 # SHIFT + F4 | <kf15> || FUNCT + c
11137 # SHIFT + F5 | <kf16> || FUNCT + d
11138 # SHIFT + F6 | <kf17> || FUNCT + e
11139 # SHIFT + F7 | <kf18> || FUNCT + f
11140 # SHIFT + F8 | <kf19> || FUNCT + g
11141 # SHIFT + F9 | <kf20> || FUNCT + h
11142 # SHIFT + F10 | <kf21> || FUNCT + i
11143 # SHIFT + F11 | <kf22> || FUNCT + j
11145 # PORTS AND SWITCH SETTINGS
11147 # Here are the switch settings for the TVI-912B/TVI-920B and
11148 # TVI-912C/TVI-920C:
11150 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
11151 # 2: 9600 3: 4800 4: 2400 5: 1200
11152 # 6: 600 7: 300 8: 150 9: 75
11155 # S2 UART/Terminal options:
11157 # 1: Not used Not allowed
11158 # 2: Alternate character set Standard character set
11159 # 3: Full duplex Half duplex
11160 # 4: 50 Hz refresh 60 Hz refresh
11161 # 5: No parity Send parity
11162 # 6: 2 stop bits 1 stop bit
11163 # 7: 8 data bits 7 data bits
11164 # 8: Not used Not allowed on Rev E or lower
11165 # 9: Even parity Odd parity
11166 # 10: Steady cursor Blinking cursor
11167 # (On Rev E or lower, use W25 instead of switch 10.)
11169 # S5 UART/Terminal options:
11171 # 1: P3-6 Not connected DSR received on P3-6
11172 # 2: P3-8 Not connected DCD received on P3-8
11174 # 3 Open, 4 Open: P3-20 Not connected
11175 # 3 Open, 4 Closed: DTR on when terminal is on
11176 # 3 Closed, 4 Open: DTR is connected to RTS
11177 # 3 Closed, 4 Closed: Not allowed
11179 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
11180 # all data transmitted out of the modem port (P3) will also be
11181 # transmitted out of the printer port (P4).
11183 # 6 Open, 7 Open: Not allowed
11184 # 6 Open, 7 Closed: 20ma current loop input
11185 # 6 Closed, 7 Open: RS232 input
11186 # 6 Closed, 7 Closed: Not allowed
11189 # If the jumper is installed, the effect will occur (the next time the terminal
11192 # S4/W31: Enables automatic LF upon receipt of CR from
11193 # remote or keyboard.
11194 # S4/W32: Enables transmission of EOT at the end of Send. If not
11195 # installed, a carriage return is sent.
11196 # S4/W33: Disables automatic carriage return in column 80.
11197 # S4/W34: Selects Page Print Mode as initial condition. If not
11198 # installed, Extension Mode is selected.
11200 # NON-STANDARD CAPABILITIES
11202 # Sending <u9> or <u7> returns a cursor position report in the format
11203 # YX\r, where Y and X are as in <cup>. This format is described in
11204 # <u8> and <u6>, but it's not clear how one should write an
11205 # appropriate scanf string, since we need to subtract %' ' from the
11206 # character after reading it. The <u9> capability is used by tack(1)
11207 # to synchronize during padding tests, and seems to work for that
11210 # This description also includes the obsolete termcap capabilities
11211 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
11213 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
11215 # The FUNCT modifier actually works with every normal key by sending
11216 # ^AX\r, where X is the sequence normally sent by that key. This is a
11217 # sort of meta key not currently describable in terminfo.
11219 # There are quite a few other keys (especially on the 920 models,) but
11220 # they are for the most part only useful in block mode.
11222 # These terminals have lots of forms manipulation features, mainly
11223 # useful in block mode, including "clear X to nulls" (vs. "clear X to
11224 # spaces"; nulls are sentinels for "send X" operations); "send X"
11225 # operations for uploading all or part of the screen; and block-mode
11226 # editing keys (they don't send escape sequences, but manipulate video
11227 # memory directly). Block mode is used for local editing, and protect
11228 # mode (in conjunction with the "write protect" attribute,
11229 # a.k.a. half-intensity outside of protect mode) is used to control
11230 # which parts of the screen are edited/sent/printed (by <mc0>).
11232 # There are at least two major families of ROM, "early" and
11233 # A49B1/A49C1; the major difference seems to be that the latter ROMs
11234 # support a few extra escape sequences for manipulating the off-screen
11235 # memory page, and for sending whole pages back to the host (mainly
11236 # useful in block mode.) The descriptions in this file don't use any
11237 # of those sequences: set cursor position including page (\E-PYX,
11238 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
11239 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
11240 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
11241 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
11242 # are as in <cup>, and some "send page" features mainly useful for
11243 # forms manipulation.
11245 # The keyboard enable (\E") and disable (\E#) sequences are unused,
11246 # except that a terminal reset (<is2>) enables the keyboard.
11248 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
11249 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
11253 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
11254 # sequences (I infer that in some TeleVideo terminal they may invert
11255 # and uninvert the display) so the <flash> sequence given here is a
11256 # cheesy page-flip instead.
11258 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
11259 # tack(1), so it is not included in the descriptions below.
11261 # It's not clear whether auto_left_margin (<bw>) flag should be set
11262 # for these terminals; tack says yes, so it is set here, but this
11263 # differs from other descriptions I've seen.
11265 # Extension print mode (<mc5>) echoes all characters to the printer
11266 # port [in addition to displaying them] except for the page print mode
11267 # sequence (<mc4>); this is a slight violation of the terminfo
11268 # definition for <mc5> but I don't expect it to cause problems. We
11269 # reset to page print mode in <rs1> since it may have been enabled
11272 # The descriptions with plus signs (+) are building blocks.
11274 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
11275 OTbs, OTpt, am, bw,
11276 cols#80, it#8, lines#24,
11277 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11278 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
11279 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
11280 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
11281 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
11282 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
11283 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
11284 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
11285 u7=\E?, u8=%c%c\r, u9=\E?,
11287 # This isn't included in the basic capabilities because it is
11288 # typically unusable in combination with the full range of video
11289 # attributes, since the magic cookie attributes turn into ASCII
11290 # control characters, and the half-intensity ("protected") attribute
11291 # converts all affected characters to spaces.
11293 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
11296 # This uses half-intensity mode (<dim>) for standout (<smso>), and
11297 # exposes no other attributes (half-intensity is the only attribute
11298 # that does not generate a magic cookie.)
11300 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
11302 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
11305 # Full magic-cookie attribute support, with half-intensity reverse
11306 # video for standout. Note that we add a space in the <dim> sequence
11307 # to give a consistent magic-cookie count. Also note that <sgr> uses
11308 # backspacing (in the TVI-supported order) to apply all requested
11309 # attributes with only a single magic cookie.
11311 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
11313 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
11315 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
11316 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
11317 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
11319 # This uses the second page memory option to save & restore screen
11320 # contents. If your terminal is missing the option, this description
11321 # should still work, but that has not been tested.
11323 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
11324 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
11325 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
11327 # This simulates flashing by briefly toggling to the other page
11330 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
11331 bel=\EK$<100>\EK, use=tvi912b+2p,
11333 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
11335 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
11336 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
11337 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
11338 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
11339 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11340 kf8=^AG\r, kf9=^AH\r,
11342 # Combinations of the basic building blocks
11344 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
11345 use=tvi912b+2p, use=tvi912b-unk,
11347 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
11348 use=tvi912b+vb, use=tvi912b-unk,
11350 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
11351 use=tvi912b+printer, use=tvi912b-unk,
11353 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
11354 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
11356 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
11357 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
11359 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
11360 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
11362 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
11363 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
11365 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
11366 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
11368 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
11369 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
11371 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
11372 use=tvi912b+dim, use=tvi912b-unk,
11374 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
11375 use=tvi912b+mc, use=tvi912b-unk,
11377 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
11378 use=tvi920b+fn, use=tvi912b-unk,
11380 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
11381 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
11383 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
11384 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
11386 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
11387 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
11389 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
11390 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
11393 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
11394 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
11397 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
11398 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
11401 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
11402 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
11405 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
11406 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
11409 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
11410 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
11413 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
11414 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
11416 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
11417 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
11419 # TeleVideo 921 and variants
11420 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
11421 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
11422 # also added empty <acsc> to suppress tic warning -- esr)
11423 tvi921|TeleVideo model 921 with sysline same as page & real vi function,
11424 OTbs, OTpt, am, hs, xenl, xhp,
11425 cols#80, lines#24, xmc#0,
11426 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11427 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11428 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11429 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
11430 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
11431 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
11432 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
11433 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
11434 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
11435 # without the beeper
11436 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
11437 # also added empty <acsc> to suppress tic warning -- esr)
11438 tvi92B|TeleVideo model 921 with sysline same as page & real vi function & no beeper,
11440 cols#80, lines#24, xmc#0,
11441 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11443 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11444 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
11445 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11446 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
11447 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11448 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
11449 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
11450 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
11451 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
11452 dl1=\ER$<2*/>, il1=\EE$<2*/>,
11453 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
11454 kil1=\EE$<2*/>, use=tvi92B,
11456 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
11457 # in from a BSD termcap file because it looks like they do something the
11458 # old ones skip -- esr)
11459 tvi924|TeleVideo tvi924,
11460 am, bw, hs, in, mir, msgr, xenl, xon,
11461 cols#80, it#8, lines#24, wsl#80, xmc#0,
11462 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
11463 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
11464 cub1=^H, cud1=^V, cuf1=^L,
11465 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
11466 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
11467 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
11468 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11469 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
11470 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11471 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
11472 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
11473 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
11474 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
11475 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
11476 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
11477 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
11480 # TVI925 DIP switches. In each of these, D = Down and U = Up,
11482 # Here are the settings for the external (baud) switches (S1):
11485 # 7 8 9 10 [Printer]
11486 # 1 2 3 4 [Main RS232]
11487 # -----------------------------------------------------
11506 # Settings for word length and stop-bits (S1)
11508 # Position Description
11510 # ---------------------------
11517 # S2 (external) settings
11519 # Position Up Dn Description
11520 # --------------------------------------------
11522 # X Duplex edit (transmit editing keys)
11523 # --------------------------------------------
11524 # 2 X 912/920 emulation
11526 # --------------------------------------------
11530 # --------------------------------------------
11534 # --------------------------------------------
11538 # --------------------------------------------
11542 # --------------------------------------------
11546 # --------------------------------------------
11547 # 6 X White on black display
11548 # X Black on white display
11549 # --------------------------------------------
11552 # --------------------------------------------
11555 # --------------------------------------------
11558 # --------------------------------------------
11561 # --------------------------------------------
11562 # 10 X CR/LF (Auto LF)
11565 # S3 (internal switch) settings:
11567 # Position Up Dn Description
11568 # --------------------------------------------
11571 # --------------------------------------------
11574 # --------------------------------------------
11577 # --------------------------------------------
11580 # --------------------------------------------
11583 # --------------------------------------------
11584 # 4 X Blinking block cursor
11586 # --------------------------------------------
11587 # 4 X Blinking underline cursor
11589 # --------------------------------------------
11590 # 4 X Steady block cursor
11592 # --------------------------------------------
11593 # 4 X Steady underline cursor
11595 # --------------------------------------------
11596 # 6 X Screen blanking timer (ON)
11597 # X Screen blanking timer (OFF)
11598 # --------------------------------------------
11599 # 7 X Page attributes
11600 # X Line attributes
11601 # --------------------------------------------
11602 # 8 X DCD disconnected
11604 # --------------------------------------------
11605 # 9 X DSR disconnected
11607 # --------------------------------------------
11608 # 10 X DTR Disconnected
11610 # --------------------------------------------
11612 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
11613 tvi925|TeleVideo 925,
11614 OTbs, am, bw, hs, ul,
11615 cols#80, lines#24, xmc#1,
11616 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
11617 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11618 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
11619 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
11620 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
11621 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11622 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11623 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11624 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
11625 tsl=\Eh\Ef, use=adm+sgr,
11626 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
11627 # to avoid "magic cookie" standout glitch:
11628 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
11630 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
11632 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
11633 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
11634 # for additional capabilities,
11635 # The following tvi descriptions from B:pjphar and virus!mike
11636 # is for all 950s. It sets the following attributes:
11637 # full duplex (\EDF) write protect off (\E()
11638 # conversation mode (\EC) graphics mode off (\E%)
11639 # white on black (\Ed) auto page flip off (\Ew)
11640 # turn off status line (\Eg) clear status line (\Ef\r)
11641 # normal video (\E0) monitor mode off (\EX or \Eu)
11642 # edit mode (\Er) load blank char to space (\Ee\040)
11643 # line edit mode (\EO) enable buffer control (^O)
11644 # protect mode off (\E\047) duplex edit keys (\El)
11645 # program unshifted send key to send line all (\E016)
11646 # program shifted send key to send line unprotected (\E004)
11647 # set the following to nulls:
11648 # field delimiter (\Ex0\200\200)
11649 # line delimiter (\Ex1\200\200)
11650 # start-protected field delimiter (\Ex2\200\200)
11651 # end-protected field delimiter (\Ex3\200\200)
11652 # set end of text delimiter to carriage return/null (\Ex4\r\200)
11654 # TVI 950 Switch Setting Reference Charts
11658 # S1 1 2 3 4 5 6 7 8 9 10
11659 # +-----------------------+-----+-----+-----------------------+
11660 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
11661 # | |Bits |Bits | |
11662 # +------+-----------------------+-----+-----+-----------------------+
11663 # | Up | See | 7 | 2 | See |
11664 # +------+-----------------------+-----+-----+-----------------------+
11665 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
11666 # +------+-----------------------+-----+-----+-----------------------+
11669 # S2 1 2 3 4 5 6 7 8 9 10
11670 # +-----+-----+-----------------+-----+-----------+-----+-----+
11671 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
11672 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11673 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
11674 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11675 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
11676 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11680 # +-----------+-----+-----+-----+-----+-----------+
11681 # | Display | 1 | 2 | 3 | 4 | Baud |
11682 # +-----------+-----+-----+-----+-----+ |
11683 # | Printer | 7 | 8 | 9 | 10 | Rate |
11684 # +-----------+-----+-----+-----+-----+-----------+
11685 # | D | D | D | D | 9600 |
11686 # | U | D | D | D | 50 |
11687 # | D | U | D | D | 75 |
11688 # | U | U | D | D | 110 |
11689 # | D | D | U | D | 135 |
11690 # | U | D | U | D | 150 |
11691 # | D | U | U | D | 300 |
11692 # | U | U | U | D | 600 |
11693 # | D | D | D | U | 1200 |
11694 # | U | D | D | U | 1800 |
11695 # | D | U | D | U | 2400 |
11696 # | U | U | D | U | 3600 |
11697 # | D | D | U | U | 4800 |
11698 # | U | D | U | U | 7200 |
11699 # | D | U | U | U | 9600 |
11700 # | U | U | U | U | 19200 |
11701 # +-----+-----+-----+-----+-----------+
11704 # +-----+-----+-----+-----------+
11705 # | 3 | 4 | 5 | Parity |
11706 # +-----+-----+-----+-----------+
11707 # | X | X | D | None |
11708 # | D | D | U | Odd |
11709 # | D | U | U | Even |
11710 # | U | D | U | Mark |
11711 # | U | U | U | Space |
11712 # +-----+-----+-----+-----------+
11716 # +-----+-----+-----------------+
11717 # | 7 | 8 | Communication |
11718 # +-----+-----+-----------------+
11719 # | D | D | Half Duplex |
11720 # | D | U | Full Duplex |
11721 # | U | D | Block |
11722 # | U | U | Local |
11723 # +-----+-----+-----------------+
11725 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
11726 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
11727 # should be present and all tvi native modes use the same string for this.
11728 # Finally, note that BSD has cud1=^V. -- esr)
11730 # TVI 950 has 11 function-keys -TD
11731 tvi950|TeleVideo 950,
11732 OTbs, am, hs, mir, msgr, xenl, xon,
11733 cols#80, it#8, lines#24, xmc#1,
11734 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
11735 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11736 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11737 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
11738 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
11740 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11741 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11743 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
11744 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
11745 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11746 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
11747 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
11748 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
11749 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
11750 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
11751 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11753 # is for 950 with two pages adds the following:
11754 # set 48 line page (\E\\2)
11755 # place cursor at page 0, line 24, column 1 (\E-07 )
11756 # set local (no send) edit keys (\Ek)
11758 # two page 950 adds the following:
11759 # when entering ex, set 24 line page (\E\\1)
11760 # when exiting ex, reset 48 line page (\E\\2)
11761 # place cursor at 0,24,1 (\E-07 )
11762 # set duplex (send) edit keys (\El) when entering vi
11763 # set local (no send) edit keys (\Ek) when exiting vi
11765 tvi950-2p|TeleVideo 950 w/2 pages,
11766 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11767 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11769 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11770 smkx=\El, use=tvi950,
11772 # is for 950 with four pages adds the following:
11773 # set 96 line page (\E\\3)
11774 # place cursor at page 0, line 24, column 1 (\E-07 )
11776 # four page 950 adds the following:
11777 # when entering ex, set 24 line page (\E\\1)
11778 # when exiting ex, reset 96 line page (\E\\3)
11779 # place cursor at 0,24,1 (\E-07 )
11781 tvi950-4p|TeleVideo 950 w/4 pages,
11782 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11783 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11785 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11786 smkx=\El, use=tvi950,
11788 # <is2> for reverse video 950 changes the following:
11789 # set reverse video (\Ed)
11791 # set vb accordingly (\Ed ...delay... \Eb)
11793 tvi950-rv|TeleVideo 950 rev video,
11794 flash=\Ed$<200/>\Eb,
11795 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11796 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
11800 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
11801 tvi950-rv-2p|TeleVideo 950 rev video w/2 pages,
11802 flash=\Ed$<200/>\Eb,
11803 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11804 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11806 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11807 smkx=\El, use=tvi950,
11809 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
11810 tvi950-rv-4p|TeleVideo 950 rev video w/4 pages,
11811 flash=\Ed$<200/>\Eb,
11812 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11813 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11815 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11816 smkx=\El, use=tvi950,
11817 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
11818 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
11819 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
11820 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
11821 # the :ko: string had :cl: in it, which means that one of the original
11822 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
11823 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
11824 # ko implies -- esr)
11825 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
11827 tvi955|TeleVideo 955,
11830 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
11831 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
11832 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
11833 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
11834 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
11835 rmam=\E[=7l, rmxon=^N,
11836 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
11838 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
11840 tvi955-w|955-w|TeleVideo 955 w/132 cols,
11842 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
11843 # use half-intensity as normal mode, full intensity as <bold>
11844 tvi955-hb|955-hb|TeleVideo 955 half-bright,
11845 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
11846 sgr0=\EG0\E[=5h, use=tvi955,
11847 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
11848 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
11849 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
11850 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
11851 # it does to the function keys. I deduced <rmam>/<smam>.
11852 # also added empty <acsc> to suppress tic warning, -- esr)
11853 tvi970|TeleVideo 970,
11854 OTbs, OTpt, am, da, db, mir, msgr,
11855 cols#80, it#8, lines#24,
11856 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
11857 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
11858 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
11859 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
11860 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
11861 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
11862 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11863 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
11864 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
11865 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
11866 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
11867 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
11868 smul=\E[4m, vpa=\E[%i%p1%dd,
11869 tvi970-vb|TeleVideo 970 with visual bell,
11870 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
11872 tvi970-2p|TeleVideo 970 with using 2 pages of memory,
11873 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
11875 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
11876 # per line (rather than 40), Esc K chooses the normal character set. Not sure
11877 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
11878 # <smul> strings are klutzy, but at least use no screen space.
11879 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
11880 # its absence means <smam>=\Ev isn't safe to use. -- esr)
11881 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
11882 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
11883 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
11884 tvipt|TeleVideo personal terminal,
11887 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
11888 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
11889 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
11890 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
11891 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
11892 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
11893 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
11894 tvi9065|TeleVideo 9065,
11895 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
11896 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
11898 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
11899 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
11900 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
11901 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
11902 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
11903 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
11904 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
11905 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
11906 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
11907 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
11908 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
11909 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
11910 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11911 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
11912 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11913 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
11914 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
11915 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
11916 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
11917 pfx=\E|%p1%{48}%+%c1%p2%s\031,
11918 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
11919 rep=\E[%p2%db%p1%c, rev=\EG4,
11920 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
11921 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
11922 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
11923 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
11924 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
11925 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
11926 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
11927 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
11928 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
11930 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
11931 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
11933 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
11934 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
11935 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index,
11939 # In September 1993, Visual Technology of Westboro, Massachusetts,
11940 # merged with White Pine Software of Nashua, New Hampshire.
11942 # White Pine Software may be contacted at +1 603/886-9050.
11943 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
11946 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
11947 # Recently I hacked together the following termcap for Visual
11948 # Technology's Visual 50 terminal. It's a slight modification of
11949 # the VT52 termcap.
11950 # It's intended to run when the Visual 50 is in VT52 emulation mode
11951 # (I know what you're thinking; if it's emulating a VT52, then why
11952 # another termcap? Well, it turns out that the Visual 50 can handle
11953 # <dl1> and db(?) among other things, which the VT52 can't)
11954 # The termcap works OK for the most part. The only problem is on
11955 # character inserts. The whole line gets painfully redrawn for each
11956 # character typed. Any suggestions?
11957 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
11958 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
11959 # disguise; <kf7>-<kf9> are really l1-l3.
11961 OTbs, OTpt, am, da, db, msgr,
11962 cols#80, it#8, lines#24,
11963 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
11964 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11965 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
11966 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
11967 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
11968 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
11969 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
11970 # this one was BSD & SCO's vi50
11971 vi50adm|Visual 50 in adm3a mode,
11973 cols#80, it#8, lines#24,
11974 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11975 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
11976 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
11977 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
11978 rmso=\ET, smso=\EU,
11979 # From: Jeff Siegal <jbs@quiotix.com>
11981 OTbs, am, mir, msgr,
11982 cols#80, it#8, lines#24,
11983 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
11984 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11985 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
11986 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
11987 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
11988 smir=\Ea, smso=\EU,
11990 # Visual 200 from BRL
11991 # The following switch settings are assumed for normal operation:
11992 # FULL_DUPLEX SCROLL CR
11993 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
11994 # Other switches may be set for operator convenience or communication
11996 # Character insertion is kludged in order to get around the "beep" misfeature.
11997 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
11998 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
11999 # and <dl1> strings, but we seem to get along fine without them.
12001 OTbs, OTpt, am, mir, msgr,
12002 OTkn#10, cols#80, it#8, lines#24,
12003 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
12004 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
12005 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
12006 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
12007 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
12008 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12009 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
12010 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
12011 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
12012 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
12013 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
12014 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
12015 # The older Visuals didn't come with function keys. This entry uses
12016 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
12017 # If your version of vi doesn't support function keys you may want
12019 vi200-f|Visual 200 no function keys,
12020 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
12021 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
12022 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
12024 vi200-rv|Visual 200 reverse video,
12025 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
12027 # the function keys are programmable but we don't reprogram them to their
12028 # default values with <is2> because programming them is very verbose. maybe
12029 # an initialization file should be made for the 300 and they could be stuck
12031 # (vi300: added <rmam>/<smam> based on init string -- esr)
12032 vi300|Visual 300 ANSI x3.64,
12035 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
12036 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12037 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12039 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
12040 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12041 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
12042 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
12043 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
12044 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
12045 smso=\E[1m, smul=\E[4m,
12046 # some of the vi300s have older firmware that has the command
12047 # sequence for setting editing extent reversed.
12048 vi300-old|Visual 300 with old firmware (set edit extent reversed),
12049 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
12051 # Visual 500 prototype entry from University of Wisconsin.
12052 # The best place to look for the escape sequences is page A1-1 of the
12053 # Visual 500 manual. The initialization sequence given here may be
12054 # overkill, but it does leave out some of the initializations which can
12055 # be done with the menus in set-up mode.
12056 # The :xp: line below is so that emacs can understand the padding requirements
12057 # of this slow terminal. :xp: is 10 time the padding factor.
12058 # (vi500: removed unknown :xp#4: termcap;
12059 # also added empty <acsc> to suppress tic warning -- esr)
12062 cols#80, it#8, lines#33,
12063 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
12064 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
12065 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12066 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
12067 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
12069 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
12070 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12071 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
12072 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
12074 # The visual 550 is a visual 300 with Tektronix graphics,
12075 # and with 33 lines. clear screen is modified here to
12076 # also clear the graphics.
12077 vi550|Visual 550 ANSI x3.64,
12079 clear=\030\E[H\E[2J, use=vi300,
12081 vi603|visual603|Visual 603,
12083 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
12084 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
12085 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
12086 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
12087 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
12088 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
12089 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12090 tsl=\EP2~, use=vt100+4bsd,
12095 # 3471 North First Street
12096 # San Jose, CA 95134
12097 # Vox: (408)-473-1200
12098 # Fax: (408) 473-1222
12099 # Web: http://www.wyse.com
12101 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
12102 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
12103 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
12104 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
12107 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
12108 # They now own the Qume and Amdek brands, too. So these are the people to
12109 # talk with about all Link, Qume, and Amdek terminals.
12111 # These entries include a few small fixes.
12112 # I canceled the bel capacities in the vb entries.
12113 # I made two trivial syntax fixes in the wyse30 entry.
12114 # I made some entries relative to adm+sgr.
12117 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
12119 # Although the Wyse 30 can support more than one attribute
12120 # it requires magic cookies to do so. Many applications do not
12121 # function well with magic cookies. The following terminfo uses
12122 # the protect mode to support one attribute (dim) without cookies.
12123 # If more than one attribute is needed then the wy30-mc terminfo
12126 wy30|wyse30|Wyse 30,
12127 am, bw, mc5i, mir, msgr, xon,
12128 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12129 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
12130 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
12131 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12132 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
12133 ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, home=^^,
12134 ht=\011$<1>, hts=\E1, il1=\EE$<2>, ind=\n$<2>, ip=$<2>,
12135 is2=\E'\E(\E\^3\E`9\016\024, kHOM=\E{, kbs=^H, kcbt=\EI,
12136 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12137 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
12138 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
12139 khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er,
12140 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12141 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12142 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
12143 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12144 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12145 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12146 smso=\E`7\E), tbc=\E0, use=wyse+sl,
12148 # This terminal description uses the non-hidden attribute mode
12149 # (with magic cookie).
12151 # (wy30-mc: added <smcup> to suppress tic warning --esr)
12152 wy30-mc|wyse30-mc|Wyse 30 with magic cookies,
12155 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
12156 rmcup=\EG0, rmso=\EG0,
12157 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12158 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12159 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12160 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12161 smso=\EG4, use=wy30, use=adm+sgr,
12162 # The mandatory pause used by <flash> does not work with
12163 # older versions of terminfo. If you see this effect then
12164 # unset xon and delete the / from the delay.
12165 # i.e. change $<100/> to $<100>
12166 wy30-vb|wyse30-vb|Wyse 30 visible bell,
12169 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
12170 # Normal) without magic cookies by using the protect mode.
12171 # The following description uses this feature, but when more
12172 # than one attribute is put on the screen at once, all attributes
12173 # will be changed to be the same as the last attribute given.
12174 # The Wyse 50 can support more attributes when used with magic
12175 # cookies. The wy50-mc terminal description uses magic cookies
12176 # to correctly handle multiple attributes on a screen.
12178 wy50|wyse50|Wyse 50,
12179 am, bw, mc5i, mir, msgr, xon,
12180 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12181 acsc=a;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, cbt=\EI,
12182 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
12183 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12184 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, ed=\EY$<20>,
12185 el=\ET, flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
12186 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12187 is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12188 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12189 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12190 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12191 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12192 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12193 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12194 mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12195 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12196 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
12197 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12198 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
12200 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12201 smso=\E`6\E), tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
12202 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
12203 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
12204 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=wyse+sl,
12205 wyse+sl|status line for Wyse terminals,
12208 dsl=\EF\r, fsl=\r, tsl=\EF,
12210 # This terminal description uses the non-hidden attribute mode
12211 # (with magic cookie).
12213 # The mandatory pause used by flash does not work with some
12214 # older versions of terminfo. If you see this effect then
12215 # unset <xon> and delete the / from the delay.
12216 # i.e. change $<100/> to $<100>
12217 # (wy50-mc: added <smcup> to suppress tic warning --esr)
12218 wy50-mc|wyse50-mc|Wyse 50 with magic cookies,
12221 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
12222 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
12223 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12224 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12225 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12226 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12227 smso=\EGt, use=wy50, use=adm+sgr,
12228 wy50-vb|wyse50-vb|Wyse 50 visible bell,
12230 wy50-w|wyse50-w|Wyse 50 132-column,
12231 cols#132, lw#7, nlab#16, wsl#97,
12232 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12234 wy50-wvb|wyse50-wvb|Wyse 50 132-column visible bell,
12238 # The Wyse 350 is a Wyse 50 with color.
12239 # Unfortunately this means that it has magic cookies.
12240 # The color attributes are designed to overlap the reverse, dim and
12241 # underline attributes. This is nice for monochrome applications
12242 # because you can make underline stuff green (or any other color)
12243 # but for true color applications it's not so hot because you cannot
12244 # mix color with reverse, dim or underline.
12245 # To further complicate things one of the attributes must be
12246 # black (either the foreground or the background). In reverse video
12247 # the background changes color with black letters. In normal video
12248 # the foreground changes colors on a black background.
12249 # This terminfo uses some of the more advanced features of curses
12250 # to display both color and blink. In the final analysis I am not
12251 # sure that the wy350 runs better with this terminfo than it does
12252 # with the wy50 terminfo (with user adjusted colors).
12254 # The mandatory pause used by flash does not work with
12255 # older versions of terminfo. If you see this effect then
12256 # unset xon and delete the / from the delay.
12257 # i.e. change $<100/> to $<100>
12259 # Bug: The <op> capability resets attributes.
12260 wy350|wyse350|Wyse 350,
12261 am, bw, mc5i, mir, xon,
12262 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
12264 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
12265 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
12266 cub1=^H, cud1=\n, cuf1=^L,
12267 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
12268 dim=\EGp, dl1=\ER, ed=\EY$<20>, el=\ET,
12269 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, il1=\EE,
12270 ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12271 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
12272 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12273 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
12274 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12275 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
12276 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12277 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
12278 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
12279 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12280 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
12281 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
12282 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
12283 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
12284 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
12286 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
12287 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
12288 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
12290 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
12291 smir=\Eq, smln=\EA10, tbc=\E0, use=adm+sgr, use=wyse+sl,
12292 wy350-vb|wyse350-vb|Wyse 350 visible bell,
12294 wy350-w|wyse350-w|Wyse 350 132-column,
12295 cols#132, lw#7, nlab#16, wsl#97,
12296 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12298 wy350-wvb|wyse350-wvb|Wyse 350 132-column visible bell,
12301 # This terminfo description is untested.
12302 # The wyse100 emulates an adm31, so the adm31 entry should work.
12306 cols#80, lines#24, xmc#1,
12307 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12308 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12309 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
12310 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
12311 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
12312 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
12313 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
12315 # The Wyse 120/150 has most of the features of the Wyse 60.
12316 # This terminal does not need padding up to 9600 baud!
12317 # <msgr> should be set but the clear screen fails when in
12318 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12321 wy120|wyse120|wy150|wyse150|Wyse 120/150,
12322 am, bw, km, mc5i, mir, msgr, xon,
12323 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601,
12324 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12325 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12326 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12327 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12328 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
12329 flash=\E`8$<100/>\E`9, home=^^, ht=\011$<1>, hts=\E1,
12330 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12331 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12333 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12334 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12335 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12336 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12337 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12338 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12339 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12340 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12341 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12342 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12343 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12344 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
12345 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
12346 rs3=\EwG\Ee($<100>,
12347 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12348 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12349 %{64}%|%;%?%p7%t%{1}%|%;%c,
12350 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12351 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12352 tbc=\E0, use=adm+sgr, use=wyse+sl,
12354 wy120-w|wyse120-w|wy150-w|wyse150-w|Wyse 120/150 132-column,
12355 cols#132, lw#7, nlab#16, wsl#97,
12356 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12357 rs2=\E`;$<70>, use=wy120,
12359 wy120-25|wyse120-25|wy150-25|wyse150-25|Wyse 120/150 80-column 25-lines,
12360 lh@, lines#25, lw@, nlab@,
12361 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
12363 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|Wyse 120/150 132-column 25-lines,
12364 lh@, lines#25, lw@, nlab@,
12365 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
12367 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
12370 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
12373 # The Wyse 60 is like the Wyse 50 but with more padding.
12374 # The reset strings are slow and the pad times very depending
12375 # on other parameters such as font loading. I have tried
12376 # to follow the following outline:
12378 # <rs1> -> set personality
12379 # <rs2> -> set number of columns
12380 # <rs3> -> set number of lines
12381 # <is1> -> select the proper font
12382 # <is2> -> do the initialization
12383 # <is3> -> set up display memory (2 pages)
12385 # The Wyse 60's that have VT100 emulation are slower than the
12386 # older Wyse 60's. This change happened mid-1987.
12387 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
12389 # The meta key is only half right. This terminal will return the
12390 # high order bit set when you hit CTRL-function_key
12392 # It may be useful to assign two function keys with the
12393 # values \E=(\s look at old data in page 1
12394 # \E=W, look at bottom of page 1
12395 # where \s is a space ( ).
12398 # The Wyse 60 runs faster when the XON/XOFF
12399 # handshake is turned off.
12401 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
12402 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12403 wy60|wyse60|Wyse 60,
12404 am, bw, km, mc5i, mir, msgr,
12405 cols#80, lh#1, lines#24, lw#8, nlab#8,
12406 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12407 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
12408 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12409 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12410 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>,
12411 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, home=\E{,
12412 ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, ip=$<3>,
12414 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12416 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12417 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12418 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12419 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12420 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12421 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12422 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12423 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12424 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12425 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12426 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
12427 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
12428 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
12429 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
12430 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12431 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12432 %{64}%|%;%?%p7%t%{1}%|%;%c,
12433 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12434 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12435 tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF12=^Ak\r,
12436 kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, kF2=^Aa\r,
12437 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
12438 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, use=wyse+sl,
12440 wy60-w|wyse60-w|Wyse 60 132-column,
12441 cols#132, lw#7, nlab#16, wsl#97,
12442 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
12443 rs2=\EeF$<150>\E`;$<150>, use=wy60,
12445 wy60-25|wyse60-25|Wyse 60 80-column 25-lines,
12446 lh@, lines#25, lw@, nlab@,
12447 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
12448 wy60-25-w|wyse60-25-w|Wyse 60 132-column 25-lines,
12449 lh@, lines#25, lw@, nlab@,
12450 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
12452 wy60-42|wyse60-42|Wyse 60 80-column 42-lines,
12454 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
12455 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
12456 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
12457 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
12458 wy60-42-w|wyse60-42-w|Wyse 60 132-column 42-lines,
12459 cols#132, lw#7, nlab#16, wsl#97,
12460 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12461 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
12462 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
12464 wy60-43|wyse60-43|Wyse 60 80-column 43-lines,
12465 lh@, lines#43, lw@, nlab@,
12466 pln@, rs3=\Ee+$<150>, use=wy60-42,
12467 wy60-43-w|wyse60-43-w|Wyse 60 132-column 43-lines,
12468 lh@, lines#43, lw@, nlab@,
12469 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
12471 wy60-vb|wyse60-vb|Wyse 60 visible bell,
12473 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
12476 # The Wyse-99GT looks at lot like the Wyse 60 except that it
12477 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
12478 # setup parameter controls the number of lines on the screen.
12479 # For the Wyse 99GT the "lines" setup parameter controls the
12480 # number of lines in a page. The screen can display 25 lines max.
12481 # The Wyse-99GT also has personalities for the VT220 and
12482 # Tektronix 4014. But this has no bearing on the native mode.
12484 # (msgr) should be set but the clear screen fails when in
12485 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12486 # then set msgr, else use msgr@.
12488 # u0 -> enter Tektronix mode
12489 # u1 -> exit Tektronix mode
12491 wy99gt|wyse99gt|Wyse 99gt,
12493 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
12494 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
12495 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
12496 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1,
12497 u0=\E~>\E8, u1=\E[42h, use=wy60,
12499 wy99gt-w|wyse99gt-w|Wyse 99gt 132-column,
12500 cols#132, lw#7, nlab#16, wsl#97,
12501 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12502 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
12505 wy99gt-25|wyse99gt-25|Wyse 99gt 80-column 25-lines,
12506 lh@, lines#25, lw@, nlab@,
12507 pln@, rs2=\E`:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
12509 wy99gt-25-w|wyse99gt-25-w|Wyse 99gt 132-column 25-lines,
12510 lh@, lines#25, lw@, nlab@,
12511 pln@, rs2=\E`;$<150>, use=wy99gt-w,
12513 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
12516 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
12517 bel@, use=wy99gt-w,
12519 # Can't set tabs! Other bugs (ANSI mode only):
12520 # - can't redefine function keys (anyway, key redefinition in ANSI mode
12521 # is too much complex to be described);
12522 # - meta key can't be described (the terminal forgets it when reset);
12523 # The xon-xoff handshaking can't be disabled while in ANSI personality, so
12524 # emacs can't work at speed greater than 9600 baud. No padding is needed at
12526 # dch1 has been commented out because it causes annoying glittering when
12527 # vi deletes one character at the beginning of a line with tabs in it.
12528 # dch makes sysgen(1M) have a horrible behaviour when deleting
12529 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
12530 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
12531 # not, so smir and rmir are commented out as well.
12532 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12533 wy99-ansi|Wyse WY-99GT in ANSI mode (int'l PC keyboard),
12534 am, km, mc5i, mir, msgr, xenl,
12535 cols#80, it#8, lines#25, vt#3,
12536 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
12537 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12538 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
12539 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
12540 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
12541 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
12542 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
12543 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
12544 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
12545 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
12546 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
12547 il1=\E[L, ind=\n$<1>, invis=\E[8m,
12548 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
12549 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
12550 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12551 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
12552 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
12553 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
12554 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
12555 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
12556 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
12557 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12558 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
12559 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
12560 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
12563 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
12564 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
12565 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
12566 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
12568 # This is the american terminal. Here tabs work fine.
12569 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12570 wy99a-ansi|Wyse WY-99GT in ANSI mode (US PC keyboard),
12571 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
12573 # This terminal (firmware version 02) has a lot of bugs:
12574 # - can't set tabs;
12575 # - other bugs in ANSI modes (see above).
12576 # This description disables handshaking when using cup. This is because
12577 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
12578 # cannot be used at speeds greater than 9600 baud, because at greater
12579 # speeds handshaking is needed even for character sending. If you use
12580 # DTR handshaking, you can use even greater speeds.
12581 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12582 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
12583 am, bw, km, mc5i, mir, msgr, xon,
12584 cols#80, it#8, lines#25,
12585 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
12586 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
12587 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
12588 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12589 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, ed=\EY$<8*>,
12590 el=\ET$<8>, enacs=\Ec@1J$<2000>,
12591 flash=\E\^1$<30/>\E\^0, home=^^, ht=^I, il1=\EE, ind=\n,
12593 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
12594 \^0\E`1\E`4\Ee.\E`:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"
12596 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
12597 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
12598 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
12599 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
12600 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
12601 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12602 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
12603 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
12604 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
12605 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
12606 9\E\^0\E`1\E`4\Ee.\E`:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
12607 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
12608 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
12609 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
12611 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
12612 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, use=wyse+sl,
12614 # This is the american terminal. Here tabs work.
12615 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12616 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
12617 hts=\E1, tbc=\E0, use=wy99f,
12620 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
12621 # The reset strings are slow and the pad times very depending
12622 # on other parameters such as font loading. I have tried
12623 # to follow the following outline:
12625 # <rs1> -> set personality
12626 # <rs2> -> set number of columns
12627 # <rs3> -> set number of lines
12628 # <is1> -> select the proper font
12629 # <is2> -> do the initialization
12630 # <is3> -> set up display memory (2 pages)
12632 # The display memory may be used for either text or graphics.
12633 # When "Display Memory = Shared" the terminal will have more pages
12634 # but garbage may be left on the screen when you switch from
12635 # graphics to text. If "Display Memory = Unshared" then the
12636 # text area will be only one page long.
12638 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
12639 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12640 wy160|wyse160|Wyse 160,
12641 am, bw, km, mc5i, mir, msgr,
12642 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
12643 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12644 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
12645 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12646 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
12647 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, ed=\EY$<30>, el=\ET$<5>,
12648 flash=\E`8$<100/>\E`9, home=\E{, ht=^I, hts=\E1,
12649 il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
12650 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12652 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12653 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12654 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12655 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12656 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12657 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12658 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12659 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
12660 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12661 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12662 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
12663 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
12664 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
12665 rs2=\E`:$<100>, rs3=\EwG\Ee($<140>,
12666 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12667 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12668 %{64}%|%;%?%p7%t%{1}%|%;%c,
12669 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12670 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12671 tbc=\E0, use=adm+sgr, use=wyse+sl,
12673 wy160-w|wyse160-w|Wyse 160 132-column,
12674 cols#132, lw#7, nlab#16, wsl#90,
12675 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
12676 rs2=\EeF$<150>\E`;$<150>, use=wy160,
12678 wy160-25|wyse160-25|Wyse 160 80-column 25-lines,
12679 lh@, lines#25, lw@, nlab@,
12680 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
12681 wy160-25-w|wyse160-25-w|Wyse 160 132-column 25-lines,
12682 lh@, lines#25, lw@, nlab@,
12683 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
12685 wy160-42|wyse160-42|Wyse 160 80-column 42-lines,
12687 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
12688 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
12689 rs3=\Ee*$<150>, use=wy160,
12690 wy160-42-w|wyse160-42-w|Wyse 160 132-column 42-lines,
12691 cols#132, lw#7, nlab#16, wsl#90,
12692 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
12693 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
12695 wy160-43|wyse160-43|Wyse 160 80-column 43-lines,
12696 lh@, lines#43, lw@, nlab@,
12697 pln@, rs3=\Ee+$<150>, use=wy160-42,
12698 wy160-43-w|wyse160-43-w|Wyse 160 132-column 43-lines,
12699 lh@, lines#43, lw@, nlab@,
12700 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
12702 wy160-vb|wyse160-vb|Wyse 160 visible bell,
12704 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
12707 # The Wyse 75 is a VT100 lookalike without advanced video.
12709 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
12710 # Underline) without magic cookies. The following description
12711 # uses this capability, but when more than one attribute is
12712 # put on the screen at once, all attributes will be changed
12713 # to be the same as the last attribute given.
12714 # The Wyse 75 can support more attributes when used with magic
12715 # cookies. The wy75-mc terminal description uses magic cookies
12716 # to correctly handle multiple attributes on a screen.
12718 wy75|wyse75|Wyse 75,
12719 am, hs, mc5i, mir, msgr, xenl, xon,
12720 cols#80, lines#24, ma#1, pb#1201, wsl#78,
12721 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12722 bel=^G, cbt=\E[Z, clear=\E[H\E[J$<30>, cr=\r,
12723 csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H,
12724 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12725 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12726 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m,
12727 dl=\E[%p1%dM$<1*>, dl1=\E[M,
12728 dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX,
12729 ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0,
12730 flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, home=\E[H,
12731 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>,
12732 il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>,
12733 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
12734 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
12735 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
12736 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12737 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12738 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
12739 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
12740 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12741 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
12742 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
12743 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
12744 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
12745 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
12747 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
12748 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
12750 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12751 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
12752 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+cvis,
12755 # This terminal description uses the non-hidden attribute mode
12756 # (with magic cookie).
12758 wy75-mc|wyse75-mc|Wyse 75 with magic cookies,
12761 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
12762 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
12763 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
12764 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
12766 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
12768 wy75-vb|wyse75-vb|Wyse 75 with visible bell,
12771 wy75-w|wyse75-w|Wyse 75 in 132 column mode,
12773 rs2=\E[35h\E[?3h$<80>, use=wy75,
12774 wy75-wvb|wyse75-wvb|Wyse 75 with visible bell 132 columns,
12778 # Wyse 85 emulating a VT220 7 bit mode.
12779 # 24 line screen with status line.
12781 # The VT220 mode permits more function keys but it wipes out
12782 # the escape key. I strongly recommend that <f11> be set to
12784 # The terminal may have to be set for 8 data bits and 2 stop
12785 # bits for the arrow keys to work.
12786 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
12787 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
12788 # <dch> leave trash on the screen when used without XON/XOFF.
12790 wy85|wyse85|Wyse 85,
12791 am, hs, mc5i, mir, msgr, xenl, xon,
12792 cols#80, it#8, lines#24, wsl#80,
12793 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12794 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12795 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12796 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
12797 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
12798 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
12799 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12800 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12801 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12802 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12803 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
12804 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
12805 ip=$<3>, is1=\E[62;1"p\E[?5W,
12806 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12807 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12808 kcuf1=\E[C, kcuu1=\E[A, kf10=\E[21~, kf11=\E[23~,
12809 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12810 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12811 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12812 kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2,
12813 lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8,
12814 rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12815 rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
12816 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
12817 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12818 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12819 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12820 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12821 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+vtedit,
12822 use=vt220+cvis, use=vt220+keypad,
12824 # Wyse 85 with visual bell.
12825 wy85-vb|wyse85-vb|Wyse 85 with visible bell,
12826 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
12828 # Wyse 85 in 132-column mode.
12829 wy85-w|wyse85-w|Wyse 85 in 132-column mode,
12831 rs2=\E[35h$<70/>\E[?3h, use=wy85,
12833 # Wyse 85 in 132-column mode with visual bell.
12834 wy85-wvb|wyse85-wvb|Wyse 85 with visible bell 132-columns,
12837 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
12838 # This copes with an apparent firmware bug in the wy85. He writes:
12839 # "What I did was change leave the terminal cursor keys set to Normal
12840 # (instead of application), and change \E[ to \233 for all the keys in
12841 # terminfo. At one point, I found some reference indicating that this
12842 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
12843 # me), but I can't find that and the server under my bookmark to "Wyse
12844 # Technical" isn't responding. So there's the question of whether the wy85
12845 # terminfo should reflect the manufacturer's intended behaviour of the terminal
12847 wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode,
12848 am, hs, mc5i, mir, msgr, xenl, xon,
12849 cols#80, it#8, lines#24, wsl#80,
12850 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12851 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12852 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12853 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
12854 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
12855 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
12856 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12857 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12858 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12859 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12860 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
12861 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
12862 ip=$<3>, is1=\E[62;1"p\E[?5W,
12863 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12864 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
12865 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
12866 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
12867 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
12868 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
12869 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
12870 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
12871 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
12872 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
12873 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
12874 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
12875 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
12876 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
12877 rs3=\E[?5l, sc=\E7,
12878 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12879 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
12880 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12881 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12882 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+cvis,
12884 # Wyse 185 emulating a VT320 7 bit mode.
12886 # This terminal always displays 25 lines. These lines may be used
12887 # as 24 data lines and a terminal status line (top or bottom) or
12888 # 25 data lines. The 48 and 50 line modes change the page size
12889 # and not the number of lines on the screen.
12891 # The Compose Character key can be used as a meta key if changed
12894 wy185|wyse185|Wyse 185,
12895 am, hs, km, mc5i, mir, msgr, xenl, xon,
12896 cols#80, it#8, lines#24, wsl#80,
12897 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12898 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12899 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12900 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12901 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12902 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12903 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
12904 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12905 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
12906 el=\E[K, el1=\E[1K, enacs=\E)0,
12907 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
12908 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
12909 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
12910 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12911 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
12912 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12913 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
12914 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12915 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12916 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
12917 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12918 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
12919 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12920 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
12921 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
12922 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12923 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12924 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12925 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12926 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
12927 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
12928 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
12929 use=vt220+vtedit, use=vt220+keypad,
12931 # Wyse 185 with 24 data lines and top status (terminal status)
12932 wy185-24|wyse185-24|Wyse 185 with 24 data lines,
12934 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12937 # Wyse 185 with visual bell.
12938 wy185-vb|wyse185-vb|Wyse 185+flash,
12941 # Wyse 185 in 132-column mode.
12942 wy185-w|wyse185-w|Wyse 185 in 132-column mode,
12944 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12945 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
12947 # Wyse 185 in 132-column mode with visual bell.
12948 wy185-wvb|wyse185-wvb|Wyse 185+flash+132 cols,
12951 # wy325 terminfo entries
12952 # Done by Joe H. Davis 3-9-92
12954 # lines 25 columns 80
12956 wy325|wyse325|Wyse epc,
12958 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601,
12959 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12960 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12961 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12962 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12963 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
12964 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
12965 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12966 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
12968 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12969 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12970 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12971 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12972 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12973 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
12974 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12975 mc0=\EP, mc4=^T, mc5=\Ed#,
12976 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12977 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12978 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12979 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
12980 rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
12981 rs3=\EwG\Ee($<100>,
12982 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12983 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12984 %{64}%|%;%?%p7%t%{1}%|%;%c,
12985 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12986 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
12987 use=adm+sgr, use=wyse+sl,
12990 # lines 24 columns 80 vb
12992 wy325-vb|wyse325-vb|Wyse-325 with visual bell,
12996 # lines 24 columns 132
12998 wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode,
12999 cols#132, lw#7, nlab#16, wsl#97,
13000 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
13001 rs2=\E`;$<70>, use=wy325,
13003 # lines 25 columns 80
13005 wy325-25|wyse325-25|wy325-80|wyse-325|Wyse-325 25 lines,
13006 lh@, lines#25, lw@, nlab@,
13007 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13009 # lines 25 columns 132
13011 wy325-25w|wyse325-25w|Wyse-325 132 columns,
13012 lh@, lines#25, lw@, nlab@,
13013 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13015 # lines 25 columns 132 vb
13017 wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video,
13021 # lines 42 columns 80
13023 wy325-42|wyse325-42|Wyse-325 42 lines,
13024 lh@, lines#42, lw@, nlab@,
13025 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13027 # lines 42 columns 132
13029 wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode,
13030 lh@, lines#42, lw@, nlab@,
13031 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13033 # lines 42 columns 132 vb
13035 wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell,
13038 # lines 43 columns 80
13040 wy325-43|wyse325-43|Wyse-325 43 lines,
13041 lh@, lines#43, lw@, nlab@,
13044 # lines 43 columns 132
13046 wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode,
13047 lh@, lines#43, lw@, nlab@,
13048 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13050 # lines 43 columns 132 vb
13052 wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell,
13055 # Wyse 370 -- 24 line screen with status line.
13057 # The terminal may have to be set for 8 data bits and 2 stop
13058 # bits for the arrow keys to work.
13060 # If you change keyboards the terminal will send different
13061 # escape sequences.
13062 # The following definition is for the basic terminal without
13065 # <u0> -> enter Tektronix 4010/4014 mode
13066 # <u1> -> exit Tektronix 4010/4014 mode
13067 # <u2> -> enter ASCII mode (from any ANSI mode)
13068 # <u3> -> exit ASCII mode (goto native ANSI mode)
13069 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
13070 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
13072 # Bug: The <op> capability resets attributes.
13073 wy370-nk|Wyse 370 without function keys,
13074 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
13075 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
13076 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13077 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13078 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
13079 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13080 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13081 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
13082 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
13083 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
13084 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
13085 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
13086 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
13087 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
13088 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
13090 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
13091 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
13092 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
13093 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
13095 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
13096 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
13097 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
13099 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
13100 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
13101 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
13102 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
13103 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
13104 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
13105 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
13106 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13107 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13108 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
13109 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
13110 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
13111 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
13112 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
13114 # Function key set for the ASCII (wy-50 compatible) keyboard
13115 # This is the default 370.
13117 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
13118 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13119 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
13120 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13121 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
13122 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
13123 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
13124 knp=\E[U, kpp=\E[V, use=wy370-nk,
13126 # Function key set for the VT-320 (and wy85) compatible keyboard
13128 wy370-105k|Wyse 370 with 105 key keyboard,
13129 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13130 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13131 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
13132 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~,
13133 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
13134 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13135 lf4=PF4, use=vt220+vtedit, use=wy370-nk,
13138 # Function key set for the PC compatible keyboard
13140 wy370-EPC|Wyse 370 with 102 key keyboard,
13141 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13142 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
13143 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13144 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13145 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
13147 # Wyse 370 with visual bell.
13148 wy370-vb|Wyse 370 with visible bell,
13151 # Wyse 370 in 132-column mode.
13152 wy370-w|Wyse 370 in 132-column mode,
13154 rs2=\E[35h\E[?3h$<70>, use=wy370,
13156 # Wyse 370 in 132-column mode with visual bell.
13157 wy370-wvb|Wyse 370 with visible bell 132-columns,
13158 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
13159 wy370-rv|Wyse 370 reverse video,
13160 rs3=\E[32h\E[?5h, use=wy370,
13162 # Wyse 99gt Tektronix 4010/4014 emulator,
13164 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
13167 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13168 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13169 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13170 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13171 %{31}%&%{64}%+%c\037,
13173 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13176 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13178 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
13180 # Wyse 160 Tektronix 4010/4014 emulator,
13182 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
13183 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13184 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13185 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13186 %{31}%&%{64}%+%c\037,
13187 home=^]8`g @\037, use=wy99gt-tek,
13189 # Wyse 370 Tektronix 4010/4014 emulator,
13191 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
13194 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13195 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
13196 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
13197 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
13199 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13202 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13204 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
13205 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
13207 # Vendor-supplied Wyse entries end here.
13210 #TITLE: TERMINFO ENTRY WY520
13212 # The WY520 terminfo is based on the WY285 entry published on the WYSE
13213 # BBS with the addition of more function keys and special keys.
13215 # rs1 -> set personality
13216 # rs2 -> set number of columns
13217 # rs3 -> set number of lines
13218 # is1 -> select the proper font
13219 # is2 -> do the initialization
13220 # is3 -> If this string is empty then rs3 gets sent.
13222 # Wyse 520 emulating a VT420 7 bit mode with default ANSI keyboard
13223 # - The BS key is programmed to generate BS in smcup since
13224 # is2 doesn't seem to work.
13225 # - Remove and shift/Remove: delete a character
13226 # - Insert : enter insert mode
13227 # - Find : delete to end of file
13228 # - Select : clear a line
13229 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
13231 # - Bottom status line (host writable line) is used.
13232 # - smkx,rmkx are removed because this would put the numeric
13233 # keypad in Dec application mode which doesn't seem to work
13234 # with SCO applications.
13236 wy520|wyse520|Wyse 520,
13237 am, hs, km, mc5i, mir, xenl, xon,
13238 cols#80, it#8, lines#24, wsl#80,
13239 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13240 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13241 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
13242 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
13243 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13244 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13245 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
13246 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
13247 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
13248 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
13249 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
13250 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
13251 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
13252 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
13253 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[1~, kel=\E[4~,
13254 kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
13255 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
13256 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
13257 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13258 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13259 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13260 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
13261 rmso=\E[m, rmul=\E[24m,
13262 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
13263 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
13264 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13265 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13266 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
13267 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13268 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
13269 vpa=\E[%i%p1%dd, use=vt220+vtedit, use=vt220+keypad,
13271 # Wyse 520 with 24 data lines and status (terminal status)
13272 wy520-24|wyse520-24|Wyse 520 with 24 data lines,
13274 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13277 # Wyse 520 with visual bell.
13278 wy520-vb|wyse520-vb|Wyse 520 with visible bell,
13279 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
13281 # Wyse 520 in 132-column mode.
13282 wy520-w|wyse520-w|Wyse 520 in 132-column mode,
13284 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13285 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
13287 # Wyse 520 in 132-column mode with visual bell.
13288 wy520-wvb|wyse520-wvb|Wyse 520 with visible bell 132-columns,
13289 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
13292 # Wyse 520 emulating a VT420 7 bit mode.
13293 # The DEL key is programmed to generate BS in is2.
13294 # With EPC keyboard.
13295 # - 'End' key will clear till end of line on EPC keyboard
13296 # - Shift/End : ignored.
13297 # - Insert : enter insert mode.
13298 # - Delete : delete a character (have to change interrupt character
13299 # to CTRL-C: stty intr '^c') for it to work since the
13300 # Delete key sends 7FH.
13301 wy520-epc|wyse520-epc|Wyse 520 with EPC keyboard,
13302 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
13303 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
13306 # Wyse 520 with 24 data lines and status (terminal status)
13307 # with EPC keyboard.
13308 wy520-epc-24|wyse520-pc-24|Wyse 520 with 24 data lines and EPC keyboard,
13310 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13313 # Wyse 520 with visual bell.
13314 wy520-epc-vb|wyse520-pc-vb|Wyse 520 with visible bell and EPC keyboard,
13315 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
13317 # Wyse 520 in 132-column mode.
13318 wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard,
13320 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13321 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
13323 # Wyse 520 in 132-column mode with visual bell.
13324 wy520-epc-wvb|wyse520-p-wvb|Wyse 520 with visible bell 132-columns and EPC keyboard,
13325 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
13327 # Wyse 520 in 80-column, 36 lines
13328 wy520-36|wyse520-36|Wyse 520 with 36 data lines,
13331 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13334 # Wyse 520 in 80-column, 48 lines
13335 wy520-48|wyse520-48|Wyse 520 with 48 data lines,
13338 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13341 # Wyse 520 in 132-column, 36 lines
13342 wy520-36w|wyse520-36w|Wyse 520 with 132 columns and 36 data lines,
13345 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13348 # Wyse 520 in 132-column, 48 lines
13349 wy520-48w|wyse520-48w|Wyse 520 with 48 data lines (132 column),
13352 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13356 # Wyse 520 in 80-column, 36 lines with EPC keyboard
13357 wy520-36pc|wyse520-36pc|Wyse 520 with 36 data lines and EPC keyboard,
13360 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13363 # Wyse 520 in 80-column, 48 lines with EPC keyboard
13364 wy520-48pc|wyse520-48pc|Wyse 520 with 48 data lines and EPC keyboard,
13367 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13370 # Wyse 520 in 132-column, 36 lines with EPC keyboard
13371 wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard (132 column),
13374 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13377 # Wyse 520 in 132-column, 48 lines with EPC keyboard
13378 wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard (132 column),
13381 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13384 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
13385 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
13386 # file and we don't know what <hts> is -- esr)
13387 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
13389 cols#80, it#8, lines#24,
13390 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
13391 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
13392 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
13393 is2=\E`:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
13394 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
13395 rmul=^O, rs1=\E`:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
13398 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
13399 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
13400 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13401 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
13404 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
13405 wy100q|Wyse 100 for Quotron,
13407 cols#80, lines#24, xmc#1,
13408 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
13409 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13410 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
13411 is2=\E`:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
13412 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
13414 #### Kermit terminal emulations
13416 # Obsolete Kermit versions may be listed in the section describing obsolete
13417 # non-ANSI terminal emulators later in the file.
13420 # KERMIT standard all versions.
13421 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13422 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13423 # From: greg small <gts@populi.berkeley.edu> 9-25-84
13424 kermit|standard kermit,
13427 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13428 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13429 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
13430 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13431 kermit-am|standard kermit plus auto-margin,
13433 is2=K1 Standard Kermit plus Automatic Margins\n,
13435 # IBMPC Kermit 1.2.
13436 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
13437 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
13439 # From: greg small <gts@populi.berkeley.edu> 8-30-84
13440 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
13443 clear=\EH\EJ, ed@, el@,
13444 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
13445 # IBMPC Kermit 1.20
13446 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13447 # Initialization must escape from that region by cursor position to line 24.
13448 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
13449 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
13450 # From: greg small <gts@populi.berkeley.edu> 12-19-84
13451 pckermit120|UCB IBMPC Kermit 1.20,
13453 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
13455 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
13457 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
13458 # MS-DOS Kermit 2.27 for the IBMPC
13459 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13460 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13461 # Initialization must escape from that region by cursor position to line 24.
13462 # Does not use am: because autowrap is lost when kermit dropped and restarted.
13463 # Reverse video for standout like H19.
13464 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13465 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13466 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
13468 cols#80, it#8, lines#24,
13469 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13470 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13471 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
13472 home=\EH, ht=^I, il1=\EL,
13473 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
13474 \sIBMPC\s3-17-85\n,
13475 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
13476 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
13477 # MS-DOS Kermit 2.27 with automatic margins
13478 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13479 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
13481 cvvis=\EO\Eq\EG\EvK5,
13482 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
13483 \smargins\s3-17-85\n,
13485 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
13486 # Automatic margins now default. Use ansi <sgr> for highlights.
13487 # Define function keys.
13488 # (msk22714: removed obsolete ":kn#10:" -- esr)
13489 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13490 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
13492 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
13493 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
13494 \sIBM\sPC\s3-17-85\n,
13495 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
13496 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13497 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
13498 # This was designed for a VT320 emulator, but it is probably a good start
13499 # at support for the VT320 itself.
13500 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
13501 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
13502 vt320-k3|MS-Kermit 3.00's VT320 emulation,
13503 am, eslok, hs, km, mir, msgr, xenl,
13504 cols#80, it#8, lines#49, pb#9600, vt#3,
13505 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13506 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cmdch=\E,
13507 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13508 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13509 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13510 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13511 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
13512 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
13514 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13515 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13516 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
13517 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
13518 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13519 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
13520 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
13521 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
13522 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
13523 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
13524 \E[4i\E[?4i\E[m\E[r\E[2$~,
13525 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
13526 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13527 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=vt220+cvis,
13529 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
13530 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
13531 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
13532 vt320-k311|DEC VT320 series as defined by kermit 3.11,
13533 am, eslok, hs, mir, msgr, xenl, xon,
13534 cols#80, it#8, lines#24, vt#3,
13535 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13536 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r,
13537 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13538 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13539 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13540 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13541 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
13542 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
13543 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
13545 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
13546 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13547 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13548 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
13549 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
13550 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
13551 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
13552 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
13553 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
13554 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
13557 ######## NON-ANSI TERMINAL EMULATIONS
13562 # These entries attempt to describe Avatar, a terminal emulation used with
13563 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
13564 # capabilities, but with cheaper (shorter) control sequences. Messy design,
13565 # excessively dependent on PC idiosyncrasies, but apparently rather popular
13566 # in the BBS world.
13568 # No color support. Avatar doesn't fit either of the Tektronix or HP color
13569 # models that terminfo knows about. An Avatar color attribute is the
13570 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
13572 # I wrote these entries while looking at the Avatar spec. I don't have
13573 # the facilities to test them. Let me know if they work, or don't.
13575 # Avatar escapes not used by these entries (because maybe you're smarter
13576 # and more motivated than I am and can figure out how to wrap terminfo
13577 # around some of them, and because they are weird enough to be funny):
13579 # ^L -- clear window/reset current attribute to default
13580 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
13582 # bit: 6 5 4 3 2 1 0
13584 # +---+---+ | +---+---+
13586 # | | foreground color
13587 # | foreground intensity
13590 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
13591 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
13592 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
13593 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
13594 # (^V^L and ^V^M set the current attribute as a side-effect.)
13595 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
13596 # in the pattern, <c> the number of times the pattern
13597 # should be repeated. If either value is 0, no-op.
13598 # The pattern can contain Avatar console codes,
13599 # including other ^V ^Y patterns.
13601 # ^V^O -- clockwise mode on; turn print direction right each time you
13602 # hit a window edge (yes, really). Turned off by CR
13604 # ^V^Q%c -- query the driver
13605 # ^V^R -- driver reset
13606 # ^V^S -- Sound tone (PC-specific)
13607 # ^V^T -- change highlight at current cursor position to %c
13608 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
13609 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
13612 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13613 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
13614 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
13615 # which is the only method that will actually work for multiple highlights.)
13617 # Update by TD - 2004: half of this was inconsistent. Found documentation
13618 # and repaired most of the damage. sgr0 is probably incorrect, but the
13619 # available documentation gives no clues for a workable string.
13620 avatar0|avatar terminal emulator level 0,
13622 cols#80, it#8, lines#25,
13623 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
13624 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
13625 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
13627 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
13628 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
13629 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
13630 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
13632 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13633 avatar0+|avatar terminal emulator level 0+,
13634 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
13635 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13636 avatar|avatar1|avatar terminal emulator level 1,
13637 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
13638 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
13642 # RBComm is a lean and mean terminal emulator written by the Interrupt List
13643 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
13644 # '90s), especially in the BBS world, and still has some loyal users due to
13645 # its very small memory footprint and to a cute macro language.
13646 rbcomm|IBM PC with RBcomm and EMACS keybindings,
13647 am, bw, mir, msgr, xenl,
13648 cols#80, it#8, lines#25,
13649 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r,
13650 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B,
13651 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
13652 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
13653 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
13654 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
13655 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
13656 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
13657 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
13658 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
13659 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
13661 rbcomm-nam|IBM PC with RBcomm without autowrap,
13663 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13664 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
13665 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13666 rbcomm-w|IBM PC with RBcomm in 132 column mode,
13668 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13669 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
13670 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13672 ######## LCD DISPLAYS
13675 #### Matrix Orbital
13676 # from: Eric Z. Ayers (eric@ale.org)
13678 # Matrix Orbital 20x4 LCD display
13679 # Command Character is 0xFE (decimal 254, octal 376)
13681 # On this device, cursor addressability isn't possible. The LCD expects:
13682 # 0xfe G <col> <row>
13683 # for cup: %p1 == row and %p2 is column
13686 # cup=\376G%p2%c%p1%c
13687 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
13688 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
13690 # Alas, there is no cursor upline capability on this display.
13692 # These entries add some 'sanity stuff' to the clear function. That is, it
13693 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
13694 # and turns off the cursor blinking and stuff like that.
13696 # NOTE: calling 'beep' turns on the backlight (bell)
13697 # NOTE: calling 'flash' turns it on and back off (visual bell)
13699 MtxOrb|generic Matrix Orbital LCD display,
13700 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
13701 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
13702 flash=\376B\001$<200>\376F, home=\376H,
13703 MtxOrb204|20x4 Matrix Orbital LCD display,
13704 cols#20, lines#4, use=MtxOrb,
13705 MtxOrb162|16x2 Matrix Orbital LCD display,
13706 cols#16, lines#2, use=MtxOrb,
13709 ######## OLDER TERMINAL TYPES
13711 # This section is devoted to older commercial terminal brands that are now
13712 # discontinued, but known to be still in use or represented by emulations.
13715 #### AT&T (att, tty)
13717 # This section also includes Teletype-branded VDTs.
13719 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
13720 # Boundless Technologies); for details, see the header comment on the ADDS
13723 # These are AT&T's official terminfo entries. All-caps aliases have been
13726 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
13727 am, eo, mir, msgr, xon,
13728 cols#80, it#8, lines#24,
13729 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
13730 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13731 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13732 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13733 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13734 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
13735 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13736 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
13737 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
13738 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
13739 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
13740 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13741 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
13743 att2350|AT&T 2350 Video Information Terminal 80 column mode,
13744 mc0@, mc4@, mc5@, use=att2300,
13746 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
13747 # Seems upward compatible with VT100, plus ins/del line/char.
13748 # On sgr, the protection parameter is ignored.
13749 # No check is made to make sure that only 3 parameters are output.
13750 # standout= reverse + half-intensity = 3 | 5.
13751 # bold= reverse + underline = 2 | 3.
13752 # note that half-bright blinking doesn't look different from normal blinking.
13753 # NOTE:you must program the function keys first, label second!
13754 # (att4410: a BSD entry has been seen with the following capabilities:
13755 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
13756 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
13757 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
13758 am, hs, mir, msgr, xon,
13759 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13760 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
13762 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
13763 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
13764 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
13765 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
13766 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
13767 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
13768 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
13769 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
13770 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
13771 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
13772 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
13774 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13775 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
13776 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
13777 ll=\E[24H, nel=\r\n,
13778 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
13780 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13781 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13783 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13784 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13785 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13786 tsl=\E7\E[25;%p1%{1}%+%dH,
13788 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
13790 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
13792 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
13794 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
13797 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
13799 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
13801 # 5410 in terms of a VT100
13802 # (v5410: added <rmam>/<smam> based on init string -- esr)
13803 v5410|att5410 in terms of a VT100,
13804 am, mir, msgr, xon,
13805 cols#80, it#8, lines#24, vt#3,
13806 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13807 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13808 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13809 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
13810 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
13811 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
13812 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
13813 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13814 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
13815 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
13816 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13818 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
13819 %;m%?%p9%t\016%e\017%;$<2>,
13820 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13821 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13825 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
13826 # even! the 5420 has three modes: scroll, window or page mode
13827 # this terminfo should work in scroll or window mode, but doesn't
13828 # take advantage of any of the differences between them.
13830 # Has memory below (2 lines!)
13831 # 3 pages of memory (plus some spare)
13832 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
13833 # <hpa>, <hts> would work for these, but these work in both scroll and window
13834 # mode... Unset insert character so insert mode works
13835 # <is1> sets 80 column mode,
13836 # <is2> escape sequence:
13837 # 1) turn off all fonts
13838 # 2) function keys off, keyboard lock off, control display off,
13839 # insert mode off, erasure mode off,
13840 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
13841 # 4) reset origin mode
13842 # 5) set line wraparound
13843 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
13845 # 8) program ENTER to transmit ^J,
13846 # We use \212 to program the ^J because a bare ^J will get translated by
13847 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
13849 # <is3> set screen color to black,
13850 # No representation in terminfo for the delete word key: kdw1=\Ed
13851 # Key capabilities assume the power-up send sequence...
13852 # This <rmcup> is not strictly necessary, but it helps maximize
13853 # memory usefulness: <rmcup=\Ez>,
13854 # Alternate sgr0: <sgr0=\E[m\EW^O>,
13855 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
13856 # smkx programs the SYS PF keys to send a set sequence.
13857 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
13858 # This string causes them to send the strings <kf1>-<kf8>
13859 # when pressed in SYS PF mode.
13860 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
13861 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
13862 OTbs, db, mir, xon,
13863 lh#2, lm#78, lw#8, nlab#8, wsl#55,
13864 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
13865 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
13866 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
13867 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
13868 flash=\E[?5h$<200>\E[?5l, home=\E[x,
13869 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
13870 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
13871 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
13872 \E[4i\Ex\E[21;1j\212,
13873 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
13874 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
13875 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13876 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13877 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13878 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
13879 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
13880 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
13881 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
13882 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
13883 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
13884 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13885 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
13886 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
13887 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
13888 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
13891 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
13892 cols#132, lm#54, wsl#97,
13893 is1=\E[?3h$<100>, use=att4415,
13895 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
13896 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
13898 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
13899 cols#132, lm#54, wsl#97,
13900 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
13903 # Note that this mode permits programming USER PF KEYS and labels
13904 # However, when you program user pf labels you have to reselect
13905 # user pf keys to make them appear!
13906 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
13907 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
13908 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13910 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
13912 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
13913 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13916 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
13917 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13920 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
13921 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13924 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
13925 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13928 att5420_2|AT&T 5420 model 2 80 cols,
13929 am, db, hs, mir, msgr, xon,
13930 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13931 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13932 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
13933 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13934 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
13935 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
13936 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13937 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
13938 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13939 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
13940 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13941 indn=\E[%p1%dE, invis=\E[8m,
13942 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
13943 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13945 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
13946 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
13947 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
13948 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
13949 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13950 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13951 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
13952 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
13953 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
13955 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
13956 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
13957 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13959 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
13960 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
13961 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
13962 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13963 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
13964 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
13966 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
13967 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13971 att4418|att5418|AT&T 5418 80 cols,
13974 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13975 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
13976 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
13977 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
13978 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
13979 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
13980 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
13981 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
13982 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
13983 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
13984 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
13985 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
13986 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
13987 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
13988 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13989 att4418-w|att5418-w|AT&T 5418 132 cols,
13991 is1=\E[?3h, use=att5418,
13993 att4420|tty4420|Teletype 4420,
13994 OTbs, da, db, eo, msgr, ul, xon,
13995 cols#80, lines#24, lm#72,
13996 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
13997 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13998 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
13999 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
14000 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
14001 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
14002 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
14003 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
14005 # The following is a terminfo entry for the Teletype 4424
14006 # asynchronous keyboard-display terminal. It supports
14007 # the vi editor. The terminal must be set up as follows,
14009 # HIGHLIGHT DEFINITION 3-TONE
14010 # DISPLAY FUNCTION GROUP III
14012 # The second entry below provides limited (a la adm3a)
14013 # operation under GROUP II.
14015 # This must be used with DISPLAY FUNCTION GROUP I or III
14016 # and HIGHLIGHT DEFINITION 3-TONE
14017 # The terminal has either bold or blink, depending on options
14019 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
14020 att4424|tty4424|Teletype 4424,
14023 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14024 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
14025 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14026 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
14027 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
14028 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
14029 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14030 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
14031 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14032 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
14033 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
14035 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
14036 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
14037 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
14040 att4424-1|tty4424-1|Teletype 4424 in display function group I,
14041 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
14044 # This entry is not one of AT&T's official ones, it was translated from the
14045 # 4.4BSD termcap file. The highlight strings are different from att4424.
14046 # I have no idea why this is -- older firmware version, maybe?
14047 # The following two lines are the comment originally attached to the entry:
14048 # This entry appears to avoid the top line - I have no idea why.
14049 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
14050 att4424m|tty4424m|Teletype 4424M,
14052 cols#80, it#8, lines#23,
14053 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
14054 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
14055 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
14056 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
14057 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14058 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
14059 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14061 # The Teletype 5425 is really version 2 of the Teletype 5420. It
14062 # is quite similar, except for some minor differences. No page
14063 # mode, for example, so all of the <cup> sequences used above have
14064 # to change back to what's being used for the 5410. Many of the
14065 # option settings have changed their numbering as well.
14067 # This has been tested on a preliminary model.
14069 # (att5425: added <rmam>/<smam> based on the init string -- esr)
14070 att5425|tty5425|att4425|AT&T 4425/5425,
14071 am, da, db, hs, mir, msgr, xenl, xon,
14072 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
14073 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14074 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14075 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
14076 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14077 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14078 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14079 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14080 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
14081 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
14082 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
14083 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14084 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
14085 invis=\E[8m, is1=\E<\E[?3l$<100>,
14086 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
14087 \E[4i\Ex\E[25;1j\212,
14088 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
14089 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14090 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
14091 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
14092 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
14093 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
14095 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14096 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
14097 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
14098 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
14099 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
14100 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14101 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
14102 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14103 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
14104 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
14105 vpa=\E[%p1%{1}%+%dd,
14107 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
14108 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
14110 att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode,
14111 cols#132, lm#54, wsl#97,
14112 is1=\E[?3h$<100>, use=tty5425,
14114 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
14115 # I also added <rmam>/<smam> -- esr)
14116 att4426|tty4426|Teletype 4426S,
14118 cols#80, lines#24, lm#48,
14119 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14120 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
14121 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
14122 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14123 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
14124 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
14125 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
14126 il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h,
14127 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
14128 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ,
14129 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
14130 khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8,
14131 rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
14132 rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
14133 smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
14134 vpa=\E[%p1%dd, use=ecma+index,
14136 # Terminfo entry for the AT&T 510 A Personal Terminal
14137 # Function keys 9 - 16 are available only after the
14138 # screen labeled (soft keys/action blocks) are labeled. Function key
14139 # 9 corresponds to the leftmost touch target on the screen,
14140 # function key 16 corresponds to the rightmost.
14142 # This entry is based on one done by Ernie Rice at Summit, NJ and
14143 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
14144 att510a|bct510a|AT&T 510A Personal Terminal,
14145 am, mir, msgr, xenl, xon,
14146 cols#80, lh#2, lines#24, lw#7, nlab#8,
14147 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14148 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14149 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
14150 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14151 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14152 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
14153 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
14154 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
14155 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
14156 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
14157 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
14158 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
14159 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
14160 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
14161 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
14162 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14163 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
14164 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14165 %|%t;7%;m%?%p9%t\016%e\017%;,
14166 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
14167 smul=\E[4m, tbc=\E[3g,
14169 # Terminfo entry for the AT&T 510 D Personal Terminal
14170 # Function keys 9 through 16 are accessed by bringing up the
14172 # Function key 9 corresponds to the leftmost touch target on the screen,
14173 # function key 16 corresponds to the rightmost.
14175 # There are problems with soft key labeling. These are due to
14176 # strangenesses in the native terminal that are impossible to
14177 # describe in a terminfo.
14178 att510d|bct510d|AT&T 510D Personal Terminal,
14179 am, da, db, mir, msgr, xenl, xon,
14180 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
14181 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14182 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14183 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
14184 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
14185 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
14186 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
14187 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
14188 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
14189 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14190 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14191 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
14192 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
14193 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
14194 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
14195 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
14196 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
14197 mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE,
14198 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14199 rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m,
14200 rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
14201 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14202 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14203 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
14204 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
14205 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
14206 use=ansi+rep, use=ecma+index,
14208 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
14209 att500|att513|AT&T 513 using page mode,
14210 am, chts, mir, msgr, xenl, xon,
14211 cols#80, lh#2, lines#24, lw#8, nlab#8,
14212 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14213 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14214 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
14215 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14216 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14217 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14218 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
14219 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14220 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
14221 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
14222 indn=\E[%p1%dE, invis=\E[8m,
14223 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
14224 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14225 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14226 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
14227 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
14228 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
14229 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
14230 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
14231 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14232 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
14233 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
14234 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
14235 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
14236 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14237 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14238 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
14239 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
14240 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
14242 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14244 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14246 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
14247 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14248 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
14249 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
14251 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
14252 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
14253 rs2=\E[5;0|, sc=\E7,
14254 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14255 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14256 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
14257 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
14258 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
14261 # printer must be set to EMUL ANSI to accept ESC codes
14262 # <cuu1> stops at top margin
14263 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
14264 # and alt font ascii,wrap on,tabs cleared
14265 # <is2> disables newline on LF,Emphasized off
14266 # The <u0> capability sets form length
14267 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
14269 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
14270 orhi#100, orl#12, orvi#72,
14271 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
14272 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
14273 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
14276 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
14277 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
14278 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
14279 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
14280 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
14281 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
14283 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
14284 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
14285 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
14286 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
14288 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
14289 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
14290 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
14291 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
14292 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
14294 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
14295 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
14296 u0=\E[%p1%dt, vpa=\E[%p1%dd,
14298 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
14299 # The following SET-UP modes are assumed for normal operation:
14300 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
14301 # Other SET-UP modes may be set for operator convenience or communication
14302 # requirements. This termcap description is for the Resident Terminal Mode.
14303 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14304 # The BRL entry also said: UNSAFE :ll=\E[70H:
14305 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
14307 cols#88, it#8, lines#70, vt#3,
14308 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
14309 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
14310 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
14311 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
14312 il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
14313 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n,
14314 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index,
14316 # 5620 terminfo (2.0 or later ROMS with char attributes)
14317 # The following SET-UP modes are assumed for normal operation:
14318 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
14319 # Other SET-UP modes may be set for operator convenience or communication
14320 # requirements. This termcap description is for Resident Terminal Mode. No
14321 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14322 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
14323 # Be aware that older versions of the dmd have a firmware bug that affects
14324 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
14325 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
14326 # also has <ll>=\E[70H commented out and marked unsafe.
14327 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
14328 att5620|dmd|tty5620|ttydmd|5620|AT&T 5620 terminal 88 columns,
14329 OTbs, am, msgr, npc, xon,
14330 cols#88, it#8, lines#70,
14331 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
14332 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14333 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
14334 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
14335 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H,
14336 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14337 khome=\E[H, kll=\E[70;1H, nel=\n,
14338 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
14339 rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
14340 smso=\E[7m, smul=\E[4m, use=ecma+index,
14341 att5620-24|tty5620-24|dmd-24|Teletype dmd 5620 in a 24x80 layer,
14342 lines#24, use=att5620,
14343 att5620-34|tty5620-34|dmd-34|Teletype dmd 5620 in a 34x80 layer,
14344 lines#34, use=att5620,
14345 # 5620 layer running the "S" system's downloaded graphics handler:
14346 att5620-s|tty5620-s|layer|vitty|AT&T 5620 S layer,
14348 cols#80, it#8, lines#72,
14349 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
14350 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
14351 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
14352 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
14355 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
14357 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
14358 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
14359 att605|AT&T 605 80 column 102key keyboard,
14361 cols#80, lines#24, lw#8, nlab#8, wsl#80,
14362 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14363 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14364 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14365 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
14366 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
14367 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14368 il1=\E[L, ind=\n, invis=\E[8m,
14369 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
14370 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
14371 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14372 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14373 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
14374 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
14375 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
14376 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
14377 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
14378 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
14379 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
14380 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
14381 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
14382 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
14383 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14384 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14385 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14386 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
14387 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
14388 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14389 tsl=\E7\E[25;%i%p1%dx,
14390 att605-pc|AT&T 605 in pc term mode,
14391 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
14393 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
14394 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
14395 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14396 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
14397 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
14398 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
14399 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
14400 xoffc=g, xonc=e, use=att605,
14401 att605-w|AT&T 605-w 132 column 102 key keyboard,
14403 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
14404 # (att610: I added <rmam>/<smam> based on the init string. I also
14405 # added <indn> and <rin> because the BSD file says the att615s have them,
14406 # and the 615 is like a 610 with a big keyboard, and most of their other
14407 # smart terminals support the same sequence -- esr)
14408 att610|AT&T 610; 80 column; 98key keyboard,
14409 am, eslok, hs, mir, msgr, xenl, xon,
14410 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14411 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14412 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14413 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14414 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14415 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14416 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14417 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14418 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14419 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14421 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
14422 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14423 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14424 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14425 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
14426 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14427 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
14429 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14430 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14431 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
14432 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14433 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14434 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14435 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14436 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
14437 use=ecma+index, use=att610+cvis0,
14438 att610-w|AT&T 610; 132 column; 98key keyboard,
14440 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14443 att610-103k|AT&T 610; 80 column; 103key keyboard,
14444 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14445 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14446 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14447 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14448 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14449 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14450 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14451 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
14452 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
14453 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
14454 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
14455 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
14456 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
14457 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
14459 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14461 att615|AT&T 615; 80 column; 98key keyboard,
14462 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14463 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14464 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14465 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14466 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14467 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14468 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
14469 att615-w|AT&T 615; 132 column; 98key keyboard,
14470 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14471 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14472 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14473 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14474 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14475 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14476 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
14477 att615-103k|AT&T 615; 80 column; 103key keyboard,
14478 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
14479 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
14480 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
14481 # (att620: I added <rmam>/<smam> based on the init string and
14482 # <rin>/<indn> from a BSD termcap -- esr)
14483 att620|AT&T 620; 80 column; 98key keyboard,
14484 am, eslok, hs, mir, msgr, xenl, xon,
14485 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14486 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14487 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14488 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14489 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14490 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14491 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14492 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14493 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14494 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14496 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
14497 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
14498 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14499 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14500 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14501 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
14502 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
14503 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
14504 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
14505 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
14506 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
14507 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
14508 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
14509 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14510 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14511 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14512 ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l,
14513 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14514 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14515 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
14516 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
14517 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14518 tsl=\E7\E[25;%i%p1%dx, use=ecma+index,
14520 att620-w|AT&T 620; 132 column; 98key keyboard,
14522 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14524 att620-103k|AT&T 620; 80 column; 103key keyboard,
14525 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14526 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14527 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14528 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14529 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14530 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14531 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14532 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
14533 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
14534 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
14535 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
14536 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
14537 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14538 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14539 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
14540 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
14542 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
14544 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14547 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
14548 # The following SETUP modes are assumed for normal operation:
14549 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
14550 # Font_Size=Large Non-Layers_Window_Cols=80
14551 # Non-Layers_Window_Rows=60
14552 # Other SETUP modes may be set for operator convenience or communication
14553 # requirements. Some capabilities assume a printer attached to the Aux EIA
14554 # port. This termcap description is for the Fixed Non-Layers Window. No
14555 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14556 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
14557 att630|AT&T 630 windowing terminal,
14558 OTbs, am, da, db, mir, msgr, npc, xon,
14559 cols#80, it#8, lines#60, lm#0,
14560 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
14561 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14562 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14563 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14564 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
14565 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14566 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z,
14567 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14568 kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq,
14569 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
14570 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{,
14571 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H,
14572 kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
14573 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
14574 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
14575 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
14577 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14579 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
14580 lines#24, use=att630,
14582 # This is the att700 entry for 700 native emulation of the AT&T 700
14583 # terminal. Comments are relative to changes from the 605V2 entry and
14584 # att730 on which the entry is based. Comments show the terminfo
14585 # capability name, termcap name, and description.
14587 # Here is what's going onm in the init string:
14588 # ESC [ 50;4| set 700 native mode (really is 605)
14589 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
14590 # ESC [ 53;0| set GenFlow to Xon/Xoff
14591 # ESC [ 8 ;0| set CR on NL
14592 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
14593 # ESC [ ? 4 l jump scroll
14594 # ESC [ ? 5 l/h video: normal (l); reverse (h)
14595 # ESC [ ?13 l Labels on
14596 # ESC [ ?15 l parity check = no
14597 # ESC [ 13 l monitor mode off
14598 # ESC [ 20 l LF on NL (not CRLF on NL)
14599 # ESC [ ? 7 h autowrap on
14600 # ESC [ 12 h local echo off
14601 # ESC ( B GO = ASCII
14602 # ESC ) 0 G1 = Special Char & Line Drawing
14603 # ESC [ ? 31 l Set 7 bit controls
14605 # Note: Most terminals, especially the 600 family use Reverse Video for
14606 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
14607 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
14608 # standout mode with \E[m (all normal attributes). The 730 entry simply
14609 # exits reverse video which would leave other current attributes intact. It
14610 # was assumed the 730 entry to be more correct so rmso has changed. The
14611 # 605V2 has no sequences to turn individual attributes off, thus its setting
14612 # and the rmso/smso settings from the 730.
14614 # Note: For the same reason as above in rmso I changed exit under-score mode
14615 # to specifically turn off underscore, rather than return to all normal
14618 # Note: The following pkey_xmit is taken from the 605V2 which contained the
14619 # capability as pfxl. It was changed here to pfx since pfxl
14620 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
14621 # allows strings to be parameters and label values must be programmed as
14622 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
14623 # and strings to be parameters. The 605V2 pfx entry should be examined later
14624 # in this regard. For reference the 730 pfxl entry is shown here for comparison
14626 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
14627 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14630 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14633 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14635 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
14639 # modular 10 pin Connector
14640 # Left side Right side
14641 # Pin 1 2 3 4 5 6 7 8 9 10
14643 # Key (notch) at bottom
14655 # The manual is 189 pages and is loaded with details about the escape codes,
14656 # etc..... Available from AT&T CIC 800-432-6600...
14657 # ask for Document number 999-300-660..
14659 att700|AT&T 700 24x80 column display w/102key keyboard,
14660 am, eslok, hs, mir, msgr, xenl, xon,
14661 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14662 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14663 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14664 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14665 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14666 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14667 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14668 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14669 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
14670 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14671 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
14672 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
14673 \E(B\E)0\E[?31l\E[0m\017,
14674 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
14675 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14676 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
14677 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
14678 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
14679 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
14680 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
14681 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
14682 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
14683 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14684 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
14685 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14686 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
14687 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14688 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
14689 \s\s\s\s\s\s%;%p2%s,
14690 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14691 ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m,
14692 rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
14694 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14695 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14696 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
14697 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
14698 tsl=\E7\E[99;%i%p1%dx, use=ansi+rep, use=att610+cvis0,
14700 # This entry was modified 3/13/90 by JWE.
14701 # fixes include additions of <enacs>, correcting <rep>, and modification
14702 # of <kHOM>. (See comments below)
14703 # att730 has status line of 80 chars
14704 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
14705 # the <kf25> and up keys are used for shifted system Fkeys
14706 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
14707 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
14708 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
14709 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
14710 # 102, 102+1, or 122 key keyboards
14712 # (att730: I added <rmam>/<smam> based on the init string -- esr)
14713 att730|AT&T 730 windowing terminal,
14714 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
14715 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
14716 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14717 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14718 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14719 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14720 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14721 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14722 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14723 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
14724 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
14725 ind=\ED, invis=\E[8m,
14726 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
14727 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14728 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14729 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14730 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
14731 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
14732 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
14733 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
14734 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
14735 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
14736 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
14737 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
14738 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14739 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
14740 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14741 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
14742 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14743 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
14744 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14745 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h,
14746 rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
14748 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14749 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14750 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14751 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
14752 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=ansi+rep,
14754 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
14755 lines#41, use=att730,
14756 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
14757 lines#24, use=att730,
14758 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
14759 flash=\E[?5l$<200>\E[?5h,
14760 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
14761 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
14762 lines#41, use=att730r,
14763 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
14764 lines#24, use=att730r,
14766 # The following represents the screen layout along with the associated
14767 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
14768 # not appear on the screen but are shown to reference the bezel buttons.
14769 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
14770 # position relative to the screen.
14774 # +----------------------------------------------------------------+
14776 # XXXX | kf0 kf24 | XXXX
14779 # XXXX | kf1 kf23 | XXXX
14782 # XXXX | kf2 kf22 | XXXX
14785 # XXXX | kf3 kf21 | XXXX
14788 # XXXX | kf4 kf20 | XXXX
14791 # XXXX | kf5 kf19 | XXXX
14794 # XXXX | kf6 kf18 | XXXX
14800 # +----------------------------------------------------------------+
14802 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
14804 # Note: XXXX represents the screen buttons
14810 # The character string sent by key 'kf26' may be user programmable
14811 # to send either \E[16s, or \E[26s.
14812 # The character string sent by key 'krfr' may be user programmable
14813 # to send either \E[17s, or \E[27s.
14815 # Depression of the "CMD" key sends \E! (kcmd)
14816 # Depression of the "MAIL" key sends \E[26s (kf26)
14817 # "REDRAW" same as "REFRESH" (krfr)
14819 # "kf" functions adds carriage return to output string if terminal is in
14822 # The following are functions not covered in the table above:
14824 # Set keyboard character (SKC): \EPn1;Pn2w
14825 # Pn1= 0 Back Space key
14827 # Pn2= Program char (hex)
14829 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
14830 # Pn1= Window number (1-39)
14831 # Pn2-Pn5= Y;X;Y;X coordinates
14833 # Screen Selection (SSL): \E[Pnu
14834 # Pn= Window number
14836 # Set Terminal Modes (SM): \E[Pnh
14837 # Pn= 3 Graphics mode
14838 # Pn= > Cursor blink
14839 # Pn= < Enter new line mode
14840 # Pn= = Enter reverse insert/replace mode
14841 # Pn= ? Enter no scroll mode
14843 # Reset Terminal Mode (RM): \E[Pnl
14844 # Pn= 3 Exit graphics mode
14845 # Pn= > Exit cursor blink
14846 # Pn= < Exit new line mode
14847 # Pn= = Exit reverse insert/replace mode
14848 # Pn= ? Exit no scroll mode
14850 # Screen Status Report (SSR): \E[Pnp
14851 # Pn= 0 Request current window number
14852 # Pn= 1 Request current window dimensions
14854 # Device Status Report (DSR): \E[6n Request cursor position
14856 # Call Status Report (CSR): \E[Pnv
14857 # Pn= 0 Call failed
14858 # Pn= 1 Call successful
14860 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
14861 # Pn1= Button number to be loaded
14862 # Pn2= Character count of "string"
14863 # Pn3= Key mode being loaded:
14867 # String= Text string (15 chars max)
14869 # Screen Number Report (SNR): \E[Pnp
14870 # Pn= Screen number
14872 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
14873 # Pn1= Number of rows available in window
14874 # Pn2= Number of columns available in window
14876 # Cursor Position Report (CPR): \E[Pn1;Pn2R
14877 # Pn1= "Y" Position of cursor
14878 # Pn2= "X" Position of cursor
14880 # Request Answer Back (RAB): \E[c
14882 # Answer Back Response (ABR): \E[?;*;30;VSV
14883 # *= 0 No printer available
14884 # *= 2 Printer available
14885 # V= Software version number
14886 # SV= Software sub version number
14887 # (printer-available field not documented in v1)
14889 # Screen Alignment Aid: \En
14891 # Bell (lower pitch): \E[x
14893 # Dial Phone Number: \EPdstring\
14894 # string= Phone number to be dialed
14896 # Set Phone Labels: \EPpstring\
14897 # string= Label for phone buttons
14899 # Set Clock: \EPchour;minute;second\
14901 # Position Clock: \EPsY;X\
14902 # Y= "Y" coordinate
14903 # X= "X" coordinate
14905 # Delete Clock: \Epr\
14907 # Programming The Function Buttons: \EPfPn;string\
14908 # Pn= Button number (00-06, 18-24)
14909 # (kf00-kf06, kf18-kf24)
14910 # string= Text to sent on button depression
14912 # The following in version 2 only:
14914 # Request For Local Directory Data: \EPp12;\
14916 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
14918 # Request for Local Directory Data in print format: \EPp13;\
14920 # Enable 'Prt on Line' mode: \022 (DC2)
14922 # Disable 'Prt on Line' mode: \024 (DC4)
14926 # The following Terminfo entry describes functions which are supported by
14927 # the AT&T 5430/pt505 terminal software version 2 and later.
14928 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
14930 cols#80, it#8, lines#24,
14931 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14932 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
14933 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
14934 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14935 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14936 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14937 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
14938 il=\E[%p1%dL, il1=\E[L, ind=\n,
14939 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
14940 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14941 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
14942 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
14943 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
14944 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
14945 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
14946 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
14947 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
14948 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
14950 # The following Terminfo entry describes functions which are supported by
14951 # the AT&T 5430/pt505 terminal software version 1.
14952 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
14954 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
14955 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
14956 lines#22, use=att505,
14958 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
14959 # This cut mark helps make life less painful for people running ncurses tic
14960 # on machines with relatively little RAM. The file can be broken in half here
14961 # cleanly and compiled in sections -- no `use' references cross this cut
14965 #### Ampex (Dialogue)
14967 # Yes, these are the same people who are better-known for making audio- and
14968 # videotape. I'm told they are located in Redwood City, CA.
14971 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
14972 # (ampex80: some capabilities merged in from SCO's entry -- esr)
14973 ampex80|a80|d80|dialogue|dialogue80|Ampex dialogue 80,
14975 cols#80, it#8, lines#24,
14976 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
14977 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14978 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
14979 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
14980 smso=\Ej, smul=\El, tbc=\E3,
14981 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
14982 ampex175|Ampex d175,
14985 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14986 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14987 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
14988 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
14989 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
14990 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
14991 # No backspace key in the main QWERTY cluster. Fortunately, it has a
14992 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
14993 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
14994 # mode), this key can be used as the erase key; I find I like this. Because
14995 # some people and some systems may not, there is another termcap ("ampex175")
14996 # that suppresses this little eccentricity by omitting the relevant capability.
14997 ampex175-b|Ampex d175 using left arrow for erase,
14998 kbs=^_, use=ampex175,
14999 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
15000 # (ampex210: removed obsolete ":kn#10:" -- esr)
15001 ampex210|a210|Ampex a210,
15002 OTbs, am, hs, xenl,
15003 cols#80, it#8, lines#24, xmc#1,
15004 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
15005 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15006 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
15007 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
15008 if=/usr/share/tabset/std, il1=\EE, invis@,
15009 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
15010 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
15011 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
15012 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
15013 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
15014 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
15015 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
15016 # and moved the padding to be *after* the caps -- esr)
15017 ampex219|ampex-219|amp219|Ampex with automargins,
15019 cols#80, it#8, lines#24,
15020 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
15021 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
15022 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
15023 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
15024 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
15025 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
15026 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15027 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
15028 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
15029 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
15030 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
15031 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
15032 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
15033 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
15034 cols#132, lines#24,
15035 bel=^G, cr=\r, cud1=\n, ind=\n,
15036 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
15037 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
15038 ampex232|ampex-232|Ampex Model 232,
15040 cols#80, lines#24, xmc#1,
15041 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
15042 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15043 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
15044 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
15045 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
15046 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
15047 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
15048 kf9=^AI\r, khome=^^, use=adm+sgr,
15049 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
15050 ampex232w|Ampex Model 232 / 132 columns,
15051 cols#132, lines#24,
15052 is2=\E\034Eg\El, use=ampex232,
15054 #### Ann Arbor (aa)
15056 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
15057 # numbers of function keys. At least some used monitors in portrait mode,
15058 # allowing up to 76-character screen heights! They were reachable at:
15060 # Ann Arbor Terminals
15061 # 6175 Jackson Road
15062 # Ann Arbor, MI 48103
15065 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
15066 # can't be found on the Web; I fear they're long dead. R.I.P.
15070 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
15071 # Highly modified 6/22 by Mike O'Brien.
15072 # split out into several for the various screen sizes by dave-yost@rand
15073 # Modifications made 3/82 by Mark Horton
15074 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
15075 # status line moved to top of screen, <flash> removed 5/82
15076 # Some unknown person at SCO then hacked the init strings to make them more
15079 # assumes the following setup:
15080 # A menu: 0000 1010 0001 0000
15081 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15082 # C menu: 56 66 0 0 9600 0110 1100
15083 # D menu: 0110 1001 1 0
15085 # Briefly, the settings are for the following modes:
15086 # (values are for bit set/clear with * indicating our preference
15087 # and the value used to test these termcaps)
15088 # Note that many of these settings are irrelevant to the terminfo
15089 # and are just set to the default mode of the terminal as shipped
15092 # A menu: 0000 1010 0001 0000
15093 # Block/underline cursor*
15094 # blinking/nonblinking cursor*
15095 # key click/no key click*
15096 # bell/no bell at column 72*
15098 # key pad is cursor control*/key pad is numeric
15099 # return and line feed/return for <cr> key *
15100 # repeat after .5 sec*/no repeat
15101 # repeat at 25/15 chars per sec. *
15103 # hold data until pause pressed/process data unless pause pressed*
15104 # slow scroll/no slow scroll*
15105 # Hold in area/don't hold in area*
15106 # functions keys have default*/function keys disabled on powerup
15108 # show/don't show position of cursor during page transmit*
15113 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15114 # Baud rate (9600*)
15116 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
15117 # 1 stop bit*/2 stop bits
15118 # parity error detection off*/on
15120 # keyboard local/on line*
15121 # half/full duplex*
15122 # disable/do not disable keyboard after data transmission*
15124 # transmit entire page/stop transmission at cursor*
15125 # transfer/do not transfer protected characters*
15126 # transmit all characters/transmit only selected characters*
15127 # transmit all selected areas/transmit only 1 selected area*
15129 # transmit/do not transmit line separators to host*
15130 # transmit/do not transmit page tab stops tabs to host*
15131 # transmit/do not transmit column tab stop tabs to host*
15132 # transmit/do not transmit graphics control (underline,inverse..)*
15134 # enable*/disable auto XON/XOFF control
15135 # require/do not require receipt of a DC1 from host after each LF*
15136 # pause key acts as a meta key/pause key is pause*
15144 # XON character (17*)
15145 # XOFF character (19*)
15147 # C menu: 56 66 0 0 9600 0110 1100
15148 # number of lines to print data on (printer) (56*)
15150 # number of lines on a sheet of paper (printer) (66*)
15152 # left margin (printer) (0*)
15154 # number of pad chars on new line to printer (0*)
15156 # printer baud rate (9600*)
15158 # printer parity: 00=odd,01=even*,10=space,11=mark
15159 # printer stop bits: 2*/1
15160 # print/do not print guarded areas*
15162 # new line is: 01=LF,10=CR,11=CRLF*
15166 # D menu: 0110 1001 1 0
15167 # LF is newline/LF is down one line, same column*
15168 # wrap to preceding line if move left from col 1*/don't wrap
15169 # wrap to next line if move right from col 80*/don't wrap
15170 # backspace is/is not destructive*
15172 # display*/ignore DEL character
15173 # display will not/will scroll*
15174 # page/column tab stops*
15175 # erase everything*/erase unprotected only
15177 # editing extent: 0=display,1=line*,2=field,3=area
15182 annarbor4080|aa4080|Ann Arbor 4080,
15185 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
15186 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
15187 %{12}%+%;%{64}%+%c,
15188 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
15189 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
15191 # Strange Ann Arbor terminal from BRL
15192 aas1901|Ann Arbor K4080 w/S1901 mod,
15195 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
15196 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
15199 # If you're using the GNU termcap library, add
15200 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
15201 # to these capabilities. This is the nonstandard GNU termcap scrolling
15202 # capability, arguments are:
15203 # 1. Total number of lines on the screen.
15204 # 2. Number of lines above desired scroll region.
15205 # 3. Number of lines below (outside of) desired scroll region.
15206 # 4. Total number of lines on the screen, the same as the first parameter.
15207 # The generic Ann Arbor entry is the only one that uses this.
15208 aaa+unk|aaa-unk|Ann Arbor Ambassador (internal - don't use this directly),
15209 OTbs, am, km, mc5i, mir, xon,
15211 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15212 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
15213 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
15214 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15215 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
15216 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
15217 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
15218 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
15219 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
15220 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15221 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
15222 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
15223 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
15224 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
15225 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
15226 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
15227 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m,
15228 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
15230 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
15231 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15234 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
15236 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15237 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
15239 aaa+rv|Ann Arbor Ambassador in reverse video,
15240 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
15241 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15242 rs1=\E[H\E[7m\E[J$<156>,
15243 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7
15244 ;%;%?%p7%t8;%;m\016,
15245 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
15246 # Ambassador with the DEC option, for partial VT100 compatibility.
15247 aaa+dec|Ann Arbor Ambassador in DEC VT100 mode,
15248 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
15249 csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O,
15250 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
15251 %p7%t8;%;m%?%p9%t\016%e\017%;,
15253 aaa-18|Ann Arbor Ambassador/18 lines,
15255 is2=\E7\E[60;0;0;18p\E8,
15256 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
15258 aaa-18-rv|Ann Arbor Ambassador/18 lines+reverse video,
15259 use=aaa+rv, use=aaa-18,
15260 aaa-20|Ann Arbor Ambassador/20 lines,
15262 is2=\E7\E[60;0;0;20p\E8,
15263 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
15265 aaa-22|Ann Arbor Ambassador/22 lines,
15267 is2=\E7\E[60;0;0;22p\E8,
15268 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
15270 aaa-24|Ann Arbor Ambassador/24 lines,
15272 is2=\E7\E[60;0;0;24p\E8,
15273 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
15275 aaa-24-rv|Ann Arbor Ambassador/24 lines+reverse video,
15276 use=aaa+rv, use=aaa-24,
15277 aaa-26|Ann Arbor Ambassador/26 lines,
15279 is2=\E7\E[60;0;0;26p\E8,
15280 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
15281 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
15282 aaa-28|Ann Arbor Ambassador/28 lines,
15284 is2=\E7\E[60;0;0;28p\E8,
15285 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
15286 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
15287 aaa-30-s|aaa-s|Ann Arbor Ambassador/30 lines w/status,
15290 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15291 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
15292 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
15293 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
15294 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15295 aaa-30-s-rv|aaa-s-rv|Ann Arbor Ambassador/30 lines+status+reverse video,
15296 use=aaa+rv, use=aaa-30-s,
15297 aaa-s-ctxt|aaa-30-s-ctxt|Ann Arbor Ambassador/30 lines+status+save context,
15298 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15299 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
15300 aaa-s-rv-ctxt|aaa-30-s-rv-ct|Ann Arbor Ambassador/30 lines+status+save context+reverse video,
15301 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15302 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
15303 aaa|aaa-30|ambas|ambassador|Ann Arbor Ambassador/30 lines,
15305 is2=\E7\E[60;0;0;30p\E8,
15306 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
15307 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
15308 aaa-30-rv|aaa-rv|Ann Arbor Ambassador/30 lines in reverse video,
15309 use=aaa+rv, use=aaa-30,
15310 aaa-30-ctxt|aaa-ctxt|Ann Arbor Ambassador/30 lines; saving context,
15311 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15313 aaa-30-rv-ctxt|aaa-rv-ctxt|Ann Arbor Ambassador/30 lines reverse video; saving context,
15314 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15315 use=aaa+rv, use=aaa-30,
15316 aaa-36|Ann Arbor Ambassador/36 lines,
15318 is2=\E7\E[60;0;0;36p\E8,
15319 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
15320 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
15321 aaa-36-rv|Ann Arbor Ambassador/36 lines+reverse video,
15322 use=aaa+rv, use=aaa-36,
15323 aaa-40|Ann Arbor Ambassador/40 lines,
15325 is2=\E7\E[60;0;0;40p\E8,
15326 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
15327 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
15328 aaa-40-rv|Ann Arbor Ambassador/40 lines+reverse video,
15329 use=aaa+rv, use=aaa-40,
15330 aaa-48|Ann Arbor Ambassador/48 lines,
15332 is2=\E7\E[60;0;0;48p\E8,
15333 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
15334 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
15335 aaa-48-rv|Ann Arbor Ambassador/48 lines+reverse video,
15336 use=aaa+rv, use=aaa-48,
15337 aaa-60-s|Ann Arbor Ambassador/59 lines+status,
15340 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15341 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
15342 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15343 aaa-60-s-rv|Ann Arbor Ambassador/59 lines+status+reverse video,
15344 use=aaa+rv, use=aaa-60-s,
15345 aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video,
15346 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
15347 aaa-60|Ann Arbor Ambassador/60 lines,
15349 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
15351 aaa-60-rv|Ann Arbor Ambassador/60 lines+reverse video,
15352 use=aaa+rv, use=aaa-60,
15353 aaa-db|Ann Arbor Ambassador 30/destructive backspace,
15355 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
15357 guru|guru-33|guru+unk|Ann Arbor guru/33 lines 80 cols,
15359 flash=\E[>59h$<100>\E[>59l,
15360 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
15361 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
15362 guru+rv|guru changes for reverse video,
15363 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
15364 guru-rv|guru-33-rv|Ann Arbor guru/33 lines+reverse video,
15365 use=guru+rv, use=guru-33,
15366 guru+s|guru status line,
15368 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
15369 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
15370 tsl=\E[>51h\E[1;%p1%dH\E[2K,
15371 guru-nctxt|guru with no saved context,
15372 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
15373 guru-s|guru-33-s|Ann Arbor guru/33 lines+status,
15375 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
15376 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15377 guru-24|Ann Arbor guru 24 lines,
15379 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
15381 guru-44|Ann Arbor guru 44 lines,
15383 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
15385 guru-44-s|Ann Arbor guru/44 lines+status,
15387 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
15388 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15389 guru-76|guru with 76 lines by 89 cols,
15391 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
15393 guru-76-s|Ann Arbor guru/76 lines+status,
15395 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
15396 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15397 guru-76-lp|guru-lp|guru with page bigger than line printer,
15398 cols#134, lines#76,
15399 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
15401 guru-76-w|guru 76 lines by 178 cols,
15402 cols#178, lines#76,
15403 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
15405 guru-76-w-s|Ann Arbor guru/76 lines+status+wide,
15406 cols#178, lines#75,
15407 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
15408 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15409 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
15410 cols#178, lines#76,
15411 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
15413 aaa-rv-unk|Ann Arbor unknown type,
15414 lh#0, lw#0, nlab#0,
15415 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
15416 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15418 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
15420 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
15422 #### Applied Digital Data Systems (adds)
15424 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
15425 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
15426 # terminals was merged again. Then AT&T sold the terminal business to
15427 # SunRiver, which later changed its name to Boundless Technologies. The
15428 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
15429 # as of early 1995) are at:
15431 # Boundless Technologies
15432 # 100 Marcus Boulevard
15433 # Hauppauge, NY 11788-3762
15434 # Vox: (800)-231-5445
15435 # Fax: (516)-342-7378
15436 # Web: http://boundless.com
15438 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
15439 # In 1995 Boundless acquired DEC's terminals business.
15442 # Regent: lowest common denominator, works on all regents.
15443 # (regent: renamed ":bc:" to ":le:" -- esr)
15444 regent|ADDS Regent Series,
15447 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
15448 home=\EY\s\s, ind=\n, ll=^A,
15449 # Regent 100 has a bug where if computer sends escape when user is holding
15450 # down shift key it gets confused, so we avoid escape.
15451 regent100|ADDS Regent 100,
15454 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15455 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
15456 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
15457 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
15458 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
15459 regent20|ADDS Regent 20,
15460 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
15462 regent25|ADDS Regent 25,
15463 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
15465 regent40|ADDS Regent 40,
15467 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
15468 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15469 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
15470 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
15471 smul=\E0`, use=regent25,
15472 regent40+|ADDS Regent 40+,
15473 is2=\EB, use=regent40,
15474 # It uses a different code for mapping acs vs dim/blink.
15475 regent60|regent200|adds200|ADDS Regent 60,
15476 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
15477 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
15478 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
15479 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
15480 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
15482 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
15483 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
15484 viewpoint|addsviewpoint|ADDS Viewpoint,
15487 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
15488 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15489 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
15490 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
15491 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
15492 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
15493 # Some viewpoints have bad ROMs that foo up on ^O
15494 screwpoint|ADDS Viewpoint with ^O bug,
15495 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
15497 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
15498 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
15499 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
15500 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
15501 # invis=01000100 and %c is the logical or of desired attributes.
15502 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
15504 # Update by TD - 2004:
15506 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
15508 # COMMANDS ASCII CODE
15510 # Address, Absolute ESC,=,row,column
15512 # Aux Port Enable ESC,@
15513 # Aux Port Disable ESC,A
15517 # Cursor forward FF
15520 # Cursor suppress ETB
15521 # Cursor enable CAN
15522 # Erase to end of line ESC,T
15523 # Erase to end of page ESC,Y
15526 # Keyboard unlock SO
15527 # Read current cursor position ESC,?
15528 # Set Attribute ESC,0,x (see below for values of x)
15529 # Tag bit reset ESC,(
15530 # Tag bit set ESC,)
15531 # Transparent Print on ESC,3
15532 # Transparent Print off ESC,4
15538 # Half Intensity A 0101
15540 # Half Intensity Blinking C 0103
15541 # Reverse Video P 0120
15542 # Reverse Video Half Intensity Q 0121
15543 # Reverse Video Blinking R 0122
15544 # Reverse Video Half Intensity
15546 # Underlined ` 0140
15547 # Underlined Half Intensity a 0141
15548 # Underlined Blinking b 0142
15549 # Underlined Half Intensity
15551 # Video suppress D 0104
15552 vp3a+|viewpoint3a+|ADDS Viewpoint 3a+,
15554 cols#80, it#8, lines#24,
15555 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
15556 cub1=^H, cud1=\n, cuf1=^L,
15557 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
15558 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
15559 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
15560 nel=\r\n, rev=\E0P\E), rmso=\E(,
15561 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
15562 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
15563 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
15564 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
15565 vp60|viewpoint60|addsvp60|ADDS Viewpoint60,
15568 # adds viewpoint 90 - from cornell
15569 # Note: emacs sends ei occasionally to insure the terminal is out of
15570 # insert mode. This unfortunately puts the viewpoint90 IN insert
15571 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
15572 # - :ei=:im=: must be present in the termcap translation.)
15573 # - <xhp> indicates glitch that attributes stick to location
15574 # - <msgr> means it's safe to move in standout mode
15575 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
15577 # Function key and label capabilities merged in from SCO.
15578 vp90|viewpoint90|ADDS Viewpoint 90,
15579 OTbs, bw, msgr, xhp,
15581 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
15582 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
15583 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
15584 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
15585 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
15586 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
15587 kf7=^B8\r, kf8=^B9\r, kf9=^B:\r, khome=^A, lf0=F1, lf1=F2,
15588 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
15589 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
15590 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
15591 # Note: if return acts weird on a980, check internal switch #2
15592 # on the top chip on the CONTROL pc board.
15593 adds980|a980|ADDS Consul 980,
15596 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
15597 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
15598 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
15599 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
15600 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
15602 #### C. Itoh Electronics
15604 # As of 1995 these people no longer make terminals (they're still in the
15605 # printer business). Their terminals were all clones of the DEC VT series.
15606 # They're located in Orange County, CA.
15609 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
15610 # the delay times and do an auto tab set rather than the indirect
15611 # file used in vt100.
15612 cit80|cit-80|citoh 80,
15615 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
15616 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
15617 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
15618 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
15619 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
15620 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
15621 cit101|citc|C. Itoh fast VT100,
15624 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
15625 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15626 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15627 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
15628 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
15629 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15630 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15631 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
15633 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
15634 # The following termcap entry was created from the Callan cd100 entry. The
15635 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
15636 # full selection of combinations of reverse video, underline, and blink.
15637 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
15638 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
15639 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
15640 cit101e|C. Itoh CIT-101e,
15641 OTbs, OTpt, am, mir, msgr,
15642 cols#80, it#8, lines#24,
15643 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
15644 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
15645 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
15646 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
15647 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
15648 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
15649 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
15650 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
15651 smkx=\E=, smso=\E[7m, smul=\E[4m,
15652 # From: David S. Lawyer, June 1997:
15653 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
15654 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
15655 # late 1980's CIT Terminals went out of business.
15656 # There is no need to use the initialization string is=... (by invoking
15657 # tset or setterm etc.) provided that the terminal has been manually set
15658 # up (and the setup saved with ^S) to be compatible with this termcap. To be
15659 # compatible it should be in ANSI mode (not VT52). A set-up that
15660 # works is to set all the manually settable stuff to factory defaults
15661 # by pressing ^D in set-up mode. Then increase the brightness with the
15662 # up-arrow key since the factory default will likely be dim on an old
15663 # terminal. Then change any options you want (provided that they are
15664 # compatible with the termcap). For my terminal I set: Screen
15665 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
15666 # on. I also set up mine for parity (but you may not need it). Then
15667 # save the setup with ^S.
15668 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
15669 cit101e-rv|C. Itoh CIT-101e (sets reverse video),
15670 am, eo, mir, msgr, xenl, xon,
15671 cols#80, it#8, lines#24,
15672 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15673 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
15674 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15675 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15676 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15677 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15678 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15679 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
15680 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
15681 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
15682 B\E[m\E[20l\E[1;24r\E[24;1H,
15683 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15684 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
15685 rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15686 rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
15687 smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
15688 smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
15689 u8=\E[?6c, u9=\E[c, use=ecma+index,
15690 cit101e-n|CIT-101e w/o am,
15692 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15694 cit101e-132|CIT-101e with 132 cols,
15696 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
15697 cit101e-n132|CIT-101e with 132 cols w/o am,
15700 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15702 # CIE Terminals CIT-500 from BRL
15703 # The following SET-UP modes are assumed for normal operation:
15704 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
15705 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
15706 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
15707 # Other SET-UP modes may be set for operator convenience or communication
15709 # Hardware tabs are assumed to be set every 8 columns; they can be set up
15710 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
15711 # "stty ixon -ixany" to enable DC3/DC1 flow control!
15712 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
15713 cit500|CIE Terminals CIT-500,
15714 OTbs, OTpt, mir, msgr, xon,
15715 OTkn#10, cols#80, it#8, lines#64, vt#3,
15716 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15717 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15718 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15719 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15720 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15721 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
15722 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
15723 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
15724 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
15725 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
15726 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
15727 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
15728 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
15729 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
15730 rmso=\E[m, rmul=\E[m,
15731 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
15732 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
15733 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15735 # C. Itoh printers begin here
15736 citoh|ci8510|8510|C. Itoh 8510a,
15739 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
15740 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
15742 citoh-pica|citoh in pica,
15743 is1=\EN, use=citoh,
15744 citoh-elite|citoh in elite,
15747 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15750 citoh-comp|citoh in compressed,
15753 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15754 \,097\,105\,113\,121\,129.,
15756 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
15757 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
15759 is1=\EP, use=citoh,
15760 citoh-6lpi|citoh in 6 lines per inch mode,
15761 is3=\EA, use=citoh,
15762 citoh-8lpi|citoh in 8 lines per inch mode,
15764 is3=\EB, use=citoh,
15766 #### Control Data (cdc)
15769 cdc456|CDC 456 terminal,
15772 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15773 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
15774 el=^V, home=^Y, il1=\EL, ind=\n,
15776 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
15780 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15781 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15782 kcuu1=^W, khome=^Y,
15783 cdc721ll|CDC Viking with long lines,
15785 cols#132, lines#24,
15786 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15787 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15788 kcuu1=^W, khome=^Y,
15789 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
15793 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15794 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
15795 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
15797 # The following switch/key settings are assumed for normal operation:
15798 # 96 chars SCROLL FULL duplex not BLOCK
15799 # Other switches may be set according to communication requirements.
15800 # Insert/delete-character cannot be used, as the whole display is affected.
15801 # "so" & "se" are commented out until jove handles "sg" correctly.
15804 OTkn#10, cols#80, lines#24,
15805 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15806 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
15807 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
15808 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
15809 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
15810 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
15811 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
15812 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
15815 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
15817 # Part of the long initialization string defines the "DOWN" key to the left
15818 # of the tab key to send an ESC. The real ESC key is positioned way out
15821 # The termcap won't work in 132 column mode due to the way it it moves the
15822 # cursor. Termcap doesn't have the capability (as far as I could tell) to
15823 # handle the 721 in 132 column mode.
15825 # (cdc721: changed :ri: to :sr: -- esr)
15826 cdc721-esc|Control Data 721,
15827 OTbs, OTpt, am, bw, msgr, xon,
15828 OTkn#10, cols#80, it#8, lines#30,
15829 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
15830 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
15831 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
15832 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
15833 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
15834 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
15835 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
15837 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
15838 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
15839 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
15840 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
15841 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
15846 # Getronics is a Dutch electronics company that at one time was called
15847 # `Geveke' and made async terminals; but (according to the company itself!)
15848 # they've lost all their documentation on the command set. The hardware
15849 # documentation suggests the terminals were actually manufactured by a
15850 # Taiwanese electronics company named Cal-Comp. There are known
15851 # to have been at least two models, the 33 and the 50.
15854 # The 50 seems to be a top end VT220 clone, with the addition of a higher
15855 # screen resolution, a larger screen, at least 1 page of memory above and
15856 # below the screen, apparently pages of memory right and left of the screen
15857 # which can be panned, and about 75 function keys (15 function keys x normal,
15858 # shift, control, func A, func B). It also has more setup possibilities than
15859 # the VT220. The monitor case is dated November 1978 and the keyboard case is
15862 # The VT100 emulation works as is. The entry below describes the rather
15863 # non-conformant (but more featureful) ANSI mode.
15865 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
15866 visa50|Geveke VISA 50 terminal in ANSI 80 character mode,
15869 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
15870 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
15871 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15872 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15873 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15874 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
15875 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
15876 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
15877 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
15878 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
15879 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
15880 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
15881 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
15882 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
15883 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
15884 lf3=A insert line, lf4=A delete line, lf5=A clear,
15885 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
15886 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
15887 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
15888 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
15889 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
15892 #### Human Designed Systems (Concept)
15894 # Human Designed Systems
15896 # King of Prussia, PA 19406
15897 # Vox: (610)-277-8300
15898 # Fax: (610)-275-5739
15899 # Net: support@hds.com
15901 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
15902 # the character-terminal business now (1995) and making X terminals. In
15903 # particular, the whole `Concept' line described here was discontinued long
15907 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
15908 # Extensive changes to c108 by arpavax:eric Feb 1982
15909 # Some unknown person at SCO then translated it to terminfo.
15911 # There seem to be a number of different versions of the C108 PROMS
15912 # (with bug fixes in its Z-80 program).
15914 # The first one that we had would lock out the keyboard of you
15915 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
15916 # Try that on your C108 and see if it sends a ^S when you type it.
15917 # If so, you have an old version of the PROMs.
15919 # You should configure the C108 to send ^S/^Q before running this.
15920 # It is much faster (at 9600 baud) than the c100 because the delays
15922 # new status line display entries for c108-8p:
15923 # <is3> - init str #3 - setup term for status display -
15924 # set programmer mode, select window 2, define window at last
15925 # line of memory, set bkgnd stat mesg there, select window 0.
15927 # <tsl> - to status line - select window 2, home cursor, erase to
15928 # end-of-window, 1/2 bright on, goto(line#0, col#?)
15930 # <fsl> - from status line - 1/2 bright off, select window 0
15932 # <dsl> - disable status display - set bkgnd status mesg with
15935 # There are probably more function keys that should be added but
15936 # I don't know what they are.
15938 # No delays needed on c108 because of ^S/^Q handshaking
15940 c108|concept108|c108-8p|concept108-8p|Concept 108 w/8 pages,
15941 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
15943 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
15944 c108-4p|concept108-4p|Concept 108 w/4 pages,
15945 OTbs, eslok, hs, xon,
15947 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
15948 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
15949 %>%t\001%{96}%-%;%{32}%+%c,
15950 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
15951 ind=\n, is1=\EK\E!\E F,
15952 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
15953 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
15954 smcup=\EU\Ev 8p\Ep\r\E\025,
15955 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
15956 c108-rv|c108-rv-8p|Concept 108 w/8 pages in reverse video,
15957 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
15959 c108-rv-4p|concept108rv4p|Concept 108 w/4 pages in reverse video,
15960 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
15962 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode,
15964 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
15965 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
15968 # These have only window relative cursor addressing, not screen
15969 # relative. To get it to work right here, smcup/rmcup (which
15970 # were invented for the concept) lock you into a one page
15971 # window for screen style programs.
15973 # To get out of the one page window, we use a clever trick:
15974 # we set the window size to zero ("\Ev " in rmcup) which the
15975 # terminal recognizes as an error and resets the window to all
15978 # This trick works on c100 but does not on c108, sigh.
15980 # Some tty drivers use cr3 for concept, others use nl3, hence
15981 # the delays on cr and ind below. This padding is only needed at
15982 # 9600 baud and up. One or the other is commented out depending on
15983 # local conventions.
15985 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
15986 # less than 6 but more than 2 will work.
15988 # Note: can't use function keys f7-f10 because they are
15989 # indistinguishable from arrow keys (!), also, del char and
15990 # clear eol use xon/xoff so they probably won't work very well.
15992 # Also note that we don't define insrt/del char/delline/eop/send
15993 # because they don't transmit unless we reset them - I figured
15994 # it was a bad idea to clobber their definitions.
15996 # The <mc5> sequence changes the escape character to ^^ so that
15997 # escapes will be passed through to the printer. Only trouble
15998 # is that ^^ won't be - ^^ was chosen to be unlikely.
15999 # Unfortunately, if you're sending raster bits through to be
16000 # plotted, any character you choose will be likely, so we lose.
16002 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
16003 # cannot be # in is2 because it will hang a c100 with no printer
16005 c100|concept100|concept|c104|c100-4p|HDS Concept 100,
16006 OTbs, am, eo, mir, ul, xenl,
16007 cols#80, lines#24, pb#9600, vt#8,
16008 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
16009 cub1=^H, cud1=\n, cuf1=\E=,
16010 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
16011 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
16012 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
16013 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
16015 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
16016 \010A@\s\E4#:"\E:a\E4#;"\E:b\E4#<"\E:c,
16017 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
16018 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
16019 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
16020 kf4=\E8, kf5=\E9, kf6=\E:a, kf7=\E:b, kf8=\E:c, khome=\E?,
16021 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
16022 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
16023 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
16024 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
16025 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
16026 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
16027 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
16028 smso=\ED, smul=\EG,
16029 c100-rv|c100-rv-4p|concept100-rv|Concept 100 reverse video,
16030 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
16031 smso=\EE, use=c100,
16032 oc100|oconcept|c100-1p|old 1-page Concept 100,
16036 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
16037 # Lots of notes, originally inline, but ncurses doesn't grok that.
16039 # am: not available in power on mode, but turned on with \E[=107;207h in
16040 # is2=. Also, \E=124l in is2= could have been used to prevent needing
16041 # to specify xenl:, but that would have rendered the last space on the
16042 # last line useless.
16043 # bw: Not available in power on mode, but turned on with \E[=107;207h in
16045 # clear: Could be done with \E[2J alone, except that vi (and probably most
16046 # other programs) assume that this also homes the cursor.
16047 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
16048 # scroll the window, and go back to window 1.
16049 # is2: the string may cause a warning to be issued by tic that it
16050 # found a very long line and that it suspects that a comma is missing
16051 # somewhere. This warning can be ignored (unless it comes up more than
16052 # once). The initialization string contains the following commands:
16054 # [Setup mode items changed from factory defaults:]
16055 # \E)0 set alternate character set to
16057 # ^O set character set to default
16058 # [In case it wasn't]
16059 # \E[m turn off all attributes
16060 # [In case they weren't off]
16061 # \E[=107; cursor wrap and
16062 # 207h character wrap on
16063 # \E[90;3u set Fkey definitions to "transmit"
16065 # \E[92;3u set cursor key definitions to
16066 # "transmit" defaults
16067 # \E[43;1u set shift F13 to transmit...
16069 # \E[44;1u set shift F14 to transmit...
16071 # \E[45;1u set shift F15 to transmit...
16073 # \E[46;1u set shift F16 to transmit...
16075 # \E[200;1u set shift up to transmit...
16077 # \E[201;1u set shift down to transmit...
16079 # \E[202;1u set shift right to transmit...
16081 # \E[203;1u set shift left to transmit...
16083 # \E[204;1u set shift home to transmit...
16085 # \E[212;1u set backtab to transmit...
16087 # \E[213;1u set shift backspace to transmit...
16089 # \E[214;1u set shift del to transmit...
16091 # [Necessary items not mentioned in setup mode:]
16092 # \E[2!w move to window 2
16093 # \E[25;25w define window as line 25 of memory
16094 # \E[!w move to window 1
16095 # \E[2*w show current line of window 2 as
16097 # \E[2+x set meta key to use high bit
16098 # \E[;3+} move underline to bottom of character
16100 # All Fkeys are set to their default transmit definitions with \E[90;3u
16101 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
16102 # setting MUST be redefined or deactivated, because the default is
16103 # contained in almost all of this terminal's Fkey strings! If for some
16104 # reason "quit" cannot be altered, the Fkeys can, but it would be
16105 # necessary to change ^| to ^] in all of these definitions, and add
16106 # \E[2;029!t to is2.
16107 # lines: is set to 24 because this terminal refuses to treat the 25th
16109 # ll: Not available in power on mode, but turned on with \E[=107;207h in
16111 # lm: Pointless, given that this definition locks a single screen of
16112 # memory into view, but what the hey...
16113 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
16114 # other attributes alone), but some programs expect this to turn off
16116 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
16117 # attributes alone), but some programs expect this to turn off
16119 # sgr: Attributes are set on this terminal with the string \E[ followed by
16120 # a list of attribute code numbers (in decimal, separated by
16121 # semicolons), followed by the character m. The attribute code
16124 # 2 for dim (which is ignored in power on mode);
16128 # 8 for not displayable; and
16129 # =99 for protected (except that there are strange side
16130 # effects to protected characters which make them inadvisable).
16131 # The mapping of terminfo parameters to attributes is as follows:
16132 # %p1 (standout) = bold and inverse together;
16133 # %p2 (underline) = underline;
16134 # %p3 (reverse) = inverse;
16135 # %p4 (blink) = blinking;
16136 # %p5 (dim) is ignored;
16137 # %p6 (bold) = bold;
16138 # %p7 (invisible) = not displayable;
16139 # %p8 (protected) is ignored; and
16140 # %p9 (alt char set) = alt char set.
16141 # The code to do this is:
16143 # %?%p1%p6%O IF (standout; bold) OR
16144 # %t;1 THEN OUTPUT ;1
16146 # %?%p2 IF underline
16147 # %t;4 THEN OUTPUT ;4
16150 # %t;5 THEN OUTPUT ;5
16152 # %?%p1%p3%O IF (standout; reverse) OR
16153 # %t;7 THEN OUTPUT ;7
16155 # %?%p7 IF invisible
16156 # %t;8 THEN OUTPUT ;8
16159 # %?%p9 IF altcharset
16160 # %t^N THEN OUTPUT ^N
16161 # %e^O ELSE OUTPUT ^O
16163 # sgr0: Everything is turned off (including alternate character set), since
16164 # there is no way of knowing what it is that the program wants turned
16166 # smul: The "underline" attribute is reconfigurable to an overline or
16167 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
16168 # bottom of the character cell. This was done to allow for more readable
16169 # underlined characters, and to be able to distinguish between an
16170 # underlined space, an underscore, and an underlined underscore.
16171 # xenl: Terminal can be configured to not need this, but this "glitch"
16172 # behavior is actually preferable with autowrap terminals.
16174 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
16175 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
16176 # string modifies the 'O' in kf43 to kf46 to a '$'.
16178 # kcbt was originally ^I but redefined in is2=.
16179 # kHOM was \E[H originally but redefined in is2=, as were a number of
16181 # kDC was originally \177 but redefined in is2=.
16183 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
16184 # tsl: Go to window 2, then do an hpa=.
16186 #------- flash=\E[8;3!}^G\E[3;3!}
16187 #------- flash=\E[?5h$<100>\E[?5l
16188 # There are two ways to flash the screen, both of which have their drawbacks.
16189 # The first is to set the bell mode to video, transmit a bell character, and
16190 # set the bell mode back - but to what? There is no way of knowing what the
16191 # user's old bell setting was before we messed with it. Worse, the command to
16192 # set the bell mode also sets the key click volume, and there is no way to say
16193 # "leave that alone", or to know what it's set to, either.
16194 # The second way to do a flash is to set the screen to inverse video, pad for a
16195 # tenth of a second, and set it back - but like before, there's no way to know
16196 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
16197 # it that way. The point is moot anyway, since vi (and probably other
16198 # programs) assume that by defining flash=, you want the computer to use it
16199 # INSTEAD of bel=, rather than as a secondary type of signal.
16201 #------- cvvis=\E[+{
16202 # The is the power on setting, which is also as visible as the cursor
16204 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
16205 # Windowing is possible, but not defined here because it is also used to
16206 # emulate status line functions. Allowing a program to set a window could
16207 # clobber the status line or render it unusable. There is additional memory,
16208 # but screen scroll functions are destructive and do not make use of it.
16210 #------- dim= Not available in power on mode.
16211 # You have a choice of defining low intensity characters as "half bright" and
16212 # high intensity as "normal", or defining low as "normal" and high as "bold".
16213 # No matter which you choose, only one of either "half bright" or "bold" is
16214 # available at any time, so taking the time to override the default is
16217 #------- prot=\E[=0;99m
16218 # Not defined, because it appears to have some strange side effects.
16219 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16220 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16221 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
16222 # Available, but making them available to programs is inadvisable.
16223 # The code to do this is:
16224 # %?%p1%{24}%< IF ((key; 24) <;
16225 # %p1%{30}%> ((key; 30) >;
16226 # %p1%{54}%< (key; 54) <
16229 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
16230 # %t\E[ THEN OUTPUT \E[
16231 # %p1%d OUTPUT (key) as decimal
16232 # [next line applies to pfx only]
16236 # %p2%s OUTPUT (string) as string
16238 # [DEL chosen as delimiter, but could be any character]
16239 # [implied: ELSE do nothing]
16243 # Not defined since anything it might do could be done faster and easier with
16244 # either Meta-Shift-Reset or the main power switch.
16246 #------- smkx=\E[1!z
16247 #------- rmkx=\E[!z
16248 # These sequences apply to the cursor and setup keys only, not to the
16249 # numeric keypad. But it doesn't matter anyway, since making these
16250 # available to programs is inadvisable.
16251 # For the key definitions below, all sequences beginning with \E$ are
16252 # custom and programmed into the terminal via is2. \E$ also has no
16253 # meaning to any other terminal.
16255 #------- cmdch=\E[;%p1%d!t
16256 # Available, but making it available to programs is inadvisable.
16257 #------- smxon=\E[1*q
16258 # Available, but making it available to programs is inadvisable.
16259 # Terminal will send XON/XOFF on buffer overflow.
16260 #------- rmxon=\E[*q
16261 # Available, but making it available to programs is inadvisable.
16262 # Terminal will not notify on buffer overflow.
16263 #------- smm=\E[2+x
16265 # Available, but making them available to programs is inadvisable.
16268 # It's not made clear in the manuals, but based on other ansi/vt type
16269 # terminals, it's a good guess that this terminal is capable of both
16270 # "transparent print" (which doesn't copy data to the screen, and
16271 # therefore needs mc5i: specified to say so) and "auxiliary print"
16272 # (which does duplicate printed data on the screen, in which case mc4=
16273 # and mc5= should use the \E[?4i and \E[?5i strings instead).
16275 hds200|Human Designed Systems HDS200,
16276 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
16277 cols#80, it#8, lines#24, lm#0,
16278 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16279 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
16280 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
16281 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16282 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16283 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16284 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16285 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
16286 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
16287 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
16289 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
16290 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
16291 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
16292 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
16293 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
16294 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
16295 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
16296 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16297 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
16298 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
16299 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
16300 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
16301 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
16302 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
16303 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
16304 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
16305 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
16306 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
16307 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
16308 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
16309 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
16310 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
16311 rmul=\E[m\017, sc=\E7,
16312 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
16313 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
16314 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
16315 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
16316 vpa=\E[%i%p1%dd, use=ansi+pp,
16318 # <ht> through <el> included to specify padding needed in raw mode.
16319 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
16320 avt-ns|Concept AVT no status line,
16321 OTbs, am, eo, mir, ul, xenl, xon,
16322 cols#80, it#8, lines#24, lm#192,
16323 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16324 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
16325 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16326 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
16327 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16328 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
16329 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
16330 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
16331 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
16332 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
16333 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
16334 \E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27
16336 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16337 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16338 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
16339 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
16340 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
16341 prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>,
16342 rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u,
16343 rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
16344 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
16345 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
16347 sgr0=\E[m\016$<1>, smacs=\017$<1>,
16348 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
16349 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16350 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
16351 avt-rv-ns|Concept AVT in reverse video mode/no status line,
16352 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16354 avt-w-ns|Concept AVT in 132 column mode/no status line,
16355 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16357 avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video,
16358 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16359 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
16361 # Concept AVT with status line. We get the status line using the
16362 # "Background status line" feature of the terminal. We swipe the
16363 # first line of memory in window 2 for the status line, keeping
16364 # 191 lines of memory and 24 screen lines for regular use.
16365 # The first line is used instead of the last so that this works
16366 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
16367 # assumes an 8 page AVT but lm isn't currently used anywhere.)
16369 avt+s|Concept AVT status line changes,
16372 dsl=\E[0*w, fsl=\E[1;1!w,
16373 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
16374 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
16375 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
16376 avt|avt-s|concept-avt|Concept AVT w/80 columns,
16377 use=avt+s, use=avt-ns,
16378 avt-rv|avt-rv-s|Concept AVT reverse video w/sl,
16379 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16380 use=avt+s, use=avt-ns,
16381 avt-w|avt-w-s|Concept AVT 132 cols+status,
16382 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16383 use=avt+s, use=avt-ns,
16384 avt-w-rv|avt-w-rv-s|Concept AVT wide+status+rv,
16385 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16386 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
16388 #### Contel Business Systems.
16391 # Contel c300 and c320 terminals.
16392 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
16394 cols#80, lines#24, xmc#1,
16395 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16396 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16397 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16398 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16399 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
16400 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16401 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16402 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
16403 # Contel c301 and c321 terminals.
16404 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
16405 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
16408 #### Data General (dg)
16410 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
16411 # the terminals group at Data General was shut down in 1991; all these
16412 # terminals have thus been discontinued.
16414 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
16415 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
16416 # sequentially, first the unmodified key codes are listed as F1 through F15.
16417 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
16418 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
16419 # F46 through F60. This is done in the private "includes" below whose names
16420 # start with "dgkeys+".
16422 # DG terminals generally support 8 bit characters. For each of these terminals
16423 # two descriptions are supplied:
16424 # 1) A default description for 8 bits/character communications, which
16425 # uses the default DG international character set and keyboard codes.
16426 # 2) A description with suffix "-7b" for 7 bits/character communications.
16427 # This description must use the NON-DEFAULT native keyboard language.
16429 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
16430 # Ctrl/Shift fdkeys (kf34-kf44).
16432 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
16433 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
16434 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16435 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
16436 kf11=\233011z, kf12=\233012z, kf13=\233013z,
16437 kf14=\233014z, kf15=\233000z, kf16=\233101z,
16438 kf17=\233102z, kf18=\233103z, kf19=\233104z,
16439 kf2=\233002z, kf20=\233105z, kf21=\233106z,
16440 kf22=\233107z, kf23=\233108z, kf24=\233109z,
16441 kf25=\233110z, kf26=\233111z, kf27=\233112z,
16442 kf28=\233113z, kf29=\233114z, kf3=\233003z,
16443 kf30=\233100z, kf31=\233201z, kf32=\233202z,
16444 kf33=\233203z, kf34=\233204z, kf35=\233205z,
16445 kf36=\233206z, kf37=\233207z, kf38=\233208z,
16446 kf39=\233209z, kf4=\233004z, kf40=\233210z,
16447 kf41=\233211z, kf42=\233212z, kf43=\233213z,
16448 kf44=\233214z, kf45=\233200z, kf46=\233301z,
16449 kf47=\233302z, kf48=\233303z, kf49=\233304z,
16450 kf5=\233005z, kf50=\233305z, kf51=\233306z,
16451 kf52=\233307z, kf53=\233308z, kf54=\233309z,
16452 kf55=\233310z, kf56=\233311z, kf57=\233312z,
16453 kf58=\233313z, kf59=\233314z, kf6=\233006z,
16454 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
16455 khome=\233H, kprt=\233i,
16457 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
16458 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
16459 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16460 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
16461 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
16462 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
16463 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
16464 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
16465 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
16466 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
16467 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
16468 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
16469 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
16470 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
16471 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
16472 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
16473 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
16474 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
16475 kf9=\E[009z, khome=\E[H, kprt=\E[i,
16477 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
16478 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
16479 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
16480 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
16481 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
16482 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
16483 kf31=^^9, kf32=^^:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
16484 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
16485 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
16486 kf8=^^x, kf9=^^y, khome=^H,
16488 dgkeys+15|Private entry describing 15 DG mode special keys,
16489 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
16490 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
16491 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
16492 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
16493 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
16494 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
16495 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^:,
16496 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
16497 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
16498 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
16499 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
16502 # Data General color terminals use the "Tektronix" color model. The total
16503 # number of colors varies with the terminal model, as does support for
16504 # attributes used in conjunction with color.
16506 # Removed u7, u8 definitions since they conflict with tack:
16507 # Preserve user-defined colors in at least some cases.
16509 # Default is ACM mode.
16510 # u8=^^F}20^^Fi^^F}21,
16512 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
16514 colors#16, ncv#53, pairs#0x100,
16516 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16517 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16518 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16519 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16520 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16522 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
16525 # Video attributes are coordinated using static variables set by "sgr", then
16526 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
16527 # (D=dim, U=underline, B=blink, R=reverse.)
16528 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
16530 colors#8, ncv#16, pairs#64,
16531 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
16532 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16533 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16534 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16535 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16536 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16537 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16539 dg+color|Color info for Data General D470C terminals in ANSI mode,
16540 colors#16, ncv#53, pairs#0x100,
16541 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16542 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16544 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16545 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16547 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16548 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16550 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16551 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16555 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
16557 colors#8, ncv#16, pairs#64,
16559 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16561 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16563 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16565 dgmode+color|Color info for Data General D470C terminals in DG mode,
16566 colors#16, pairs#0x100,
16567 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16568 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16569 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16570 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16573 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
16575 colors#52, ncv#53, pairs#26,
16576 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
16577 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
16578 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
16580 oc=\036RG01A00FF00000000\036RG01B00000000FF00
16581 \036RG01C007F00000000\036RG01D000000007F00,
16582 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
16583 scp=\036RG2%p1%02X,
16585 # Colors are in the order: normal, reverse, dim, dim + reverse.
16586 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
16588 colors#52, ncv#53, pairs#26,
16589 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
16590 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
16591 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
16592 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
16593 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
16594 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
16595 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
16596 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
16597 oc=\036RG01:00??00000000\036RG01;00000000??00\036RG01<007?00
16598 000000\036RG01=000000007?00,
16599 op=\036RF4831:\036RF2>31;\036RF1=31<\036RF3?31=,
16600 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
16602 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
16603 # Initialization string 1 sets:
16604 # ^R - vertical scrolling enabled
16605 # ^C - blinking enabled
16606 dg-generic|generic Data General terminal in DG mode,
16609 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16610 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
16611 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
16612 smul=^T, use=dgkeys+11,
16614 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
16615 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
16616 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
16617 # maybe they were originally nuls (which would fit).
16619 dg200|Data General DASHER 200,
16622 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16623 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
16624 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
16625 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
16626 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
16629 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
16630 dg210|dg-ansi|Data General 210/211,
16633 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16634 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16635 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16636 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
16637 smso=\E[7;m, smul=\E[4;m,
16638 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
16639 # courtesy of Carlos Rucalde of Vantage Software, Inc.
16640 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
16641 # I suspect the d200 function keys actually work on the dg211, check it out.)
16642 dg211|Data General d211,
16643 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
16644 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
16645 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
16647 # dg450 from Cornell (not official)
16648 dg450|dg6134|Data General 6134,
16649 cub1@, cuf1=^X, use=dg200,
16652 # Note: lesser Dasher terminals will not work with vi because vi insists upon
16653 # having a command to move straight down from any position on the bottom line
16654 # and scroll the screen up, or a direct vertical scroll command. The 460 and
16655 # above have both, the D210/211, for instance, has neither. We must use ANSI
16656 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
16657 # backspace on all terminals. This is not so in DG mode.
16658 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
16659 # grounds that there is no matching ":ml:"
16660 dg460-ansi|Data General Dasher 460 in ANSI-mode,
16661 OTbs, am, msgr, ul,
16662 cols#80, it#8, lines#24,
16663 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
16664 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
16665 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16666 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
16667 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16668 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
16669 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
16670 kf8=\E[009z, kf9=\E[00:z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
16671 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, mc0=\E[i,
16672 rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
16673 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
16675 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
16676 u7=\E[6n, u8=\E[5n, u9=\E[0n,
16677 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
16678 # Data General 605x
16679 # Ought to work for a Model 6242, Type D210 as well as a 605x.
16680 # Note that the cursor-down key transmits ^Z. Job control users, beware!
16681 # This also matches a posted description of something called a `Dasher 100'
16682 # so there's a dg100 alias here.
16683 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
16684 dg6053-old|dg100|Data General 6053,
16687 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
16688 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
16689 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
16690 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
16691 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
16692 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
16695 # (Some performance can be gained over the generic DG terminal type)
16696 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
16698 home=\020\0\0, ll=^P\0^W, use=dg-generic,
16700 # Like 6053, but adds reverse video and more keypad and function keys.
16701 d200|d200-dg|Data General DASHER D200,
16702 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
16703 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16704 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
16705 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
16707 # DASHER D210 series terminals in ANSI mode.
16708 # Reverse video, no insert/delete character/line, 7 bits/character only.
16710 # Initialization string 1 sets:
16711 # <0 - scrolling enabled
16712 # <1 - blink enabled
16713 # <4 - print characters regardless of attributes
16714 d210|d214|Data General DASHER D210 series,
16717 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
16718 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16719 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16720 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
16721 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
16722 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
16723 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
16725 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
16727 # DASHER D210 series terminals in DG mode.
16728 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
16729 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
16731 ed=^^FF, use=d200-dg,
16733 # DASHER D211 series terminals in ANSI mode.
16734 # Like the D210, but with 8-bit characters and local printer support.
16736 # Initialization string 2 sets:
16738 # 2;1 - 8 bit operations
16739 # 1;1 - 8 bit (international) keyboard language
16740 # \E(B - default primary character set (U.S. ASCII)
16741 # \E)4 - default secondary character set (international)
16742 # ^O - primary character set
16744 d211|d215|Data General DASHER D211 series,
16746 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
16749 # Initialization string 2 sets:
16751 # 2;0 - 7 bit operations
16752 # 1;0 - 7 bit (native) keyboard language
16753 # \E(0 - default character set (the keyboard native language)
16754 # ^O - primary character set
16755 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
16757 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
16759 # Like the D210 series, but adds support for 8-bit characters.
16761 # Reset string 2 sets:
16762 # ^^N - secondary character set
16763 # ^^FS0> - 8 bit international character set
16764 # ^^O - primary character set
16765 # ^^FS00 - default character set (matching the native keyboard language)
16767 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
16769 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
16771 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
16774 # Enhanced DG mode with changes to be more UNIX compatible.
16775 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
16778 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
16779 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
16780 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
16781 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
16782 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
16783 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
16784 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
16785 rs2=\036N\036FS0E\036O\036FS00,
16786 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
16787 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
16789 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
16790 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
16791 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
16793 is3=^^Fz2, use=d216+,
16795 d217-unix|Data General DASHER D217 in DG-UNIX mode,
16797 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
16800 # DASHER D220 color terminal in ANSI mode.
16801 # Like the D470C but with fewer colors and screen editing features.
16803 # Initialization string 1 sets:
16805 # <0 - scrolling enabled
16806 # <1 - blink enabled
16807 # <4 - print characters regardless of attributes
16808 # \E[m - all attributes off
16809 # Reset string 1 sets:
16810 # \Ec - initial mode defaults (RIS)
16812 d220|Data General DASHER D220,
16814 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16815 use=dg+color8, use=d470c,
16817 d220-7b|Data General DASHER D220 in 7 bit mode,
16819 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16820 use=dg+color8, use=d470c-7b,
16822 # Initialization string 3 sets:
16823 # - default cursor (solid rectangle)
16824 # Reset string 2 sets:
16825 # ^^N - secondary character set
16826 # ^^FS0> - 8 bit international character set
16827 # ^^O - primary character set
16828 # ^^FS00 - default character set (matching the native keyboard language)
16830 d220-dg|Data General DASHER D220 color terminal in DG mode,
16832 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
16833 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
16836 # DASHER D230C color terminal in ANSI mode.
16837 # Like the D220 but with minor ANSI compatibility improvements.
16839 d230c|d230|Data General DASHER D230C,
16840 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
16841 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
16842 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}
16843 %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e
16844 %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;,
16845 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
16846 smul=\E[4;50m, use=dgkeys+7b, use=d220,
16848 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
16851 # DASHER D400/D450 series terminals.
16852 # These add intelligent features like insert/delete to the D200 series.
16854 # Initialization string 2 sets:
16855 # ^^FQ2 - default cursor (solid rectangle)
16856 # ^^FW - character protection disabled
16857 # ^^FJ - normal (80 column) mode
16858 # ^^F\^ - horizontal scrolling enabled (for alignment)
16859 # ^^FX004? - margins at columns 0 and 79
16860 # ^^F] - horizontal scrolling disabled
16861 # ^^O - primary character set
16862 # ^^FS00 - default character set (the keyboard native language)
16863 # - (should reset scrolling regions, but that glitches the screen)
16864 # Reset string 1 sets:
16865 # ^^FA - all terminal defaults except scroll rate
16866 # Reset string 2 sets:
16867 # ^^F] - horizontal scrolling disabled
16868 # ^^FT0 - jump scrolling
16870 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
16872 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
16873 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
16874 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
16875 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
16877 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
16879 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16880 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
16881 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
16884 # DASHER D410/D460 series terminals in ANSI mode.
16885 # These add a large number of intelligent terminal features.
16887 # Initialization string 1 sets:
16889 # <0 - scrolling enabled
16890 # <1 - blink enabled
16891 # <2 - horizontal scrolling enabled (for alignment)
16892 # <4 - print characters regardless of attributes
16893 # \E[5;0v - normal (80 column) mode
16894 # \E[1;1;80w - margins at columns 1 and 80
16896 # 1 - print all characters even if protected
16897 # 6 - character protection disabled
16898 # <2 - horizontal scrolling disabled
16899 # - (should reset scrolling regions, but that glitches the screen)
16901 # Initialization string 2 sets:
16903 # 3;2 - default cursor (solid rectangle)
16904 # 2;1 - 8 bit operations
16905 # 1;1 - international keyboard language
16906 # \E(B - default primary character set (U.S. ASCII)
16907 # \E)4 - default secondary character set (international)
16908 # ^O - primary character set
16910 # Reset string 1 sets:
16911 # \Ec - initial mode defaults (RIS)
16912 # \E[<2h - horizontal scrolling disabled
16914 # Reset string 2 sets:
16916 # 4;0 - jump scrolling
16917 # 2;1 - 8 bit operations
16918 # 1;1 - 8 bit (international) keyboard language
16919 # \E(B - default primary character set (U.S. ASCII)
16920 # \E)4 - default secondary character set (international)
16922 d410|d411|d460|d461|Data General DASHER D410/D460 series,
16924 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
16925 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16926 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
16927 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
16928 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
16929 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
16930 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
16931 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
16932 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
16933 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
16935 # Initialization string 2 sets:
16937 # 3;2 - default cursor (solid rectangle)
16938 # 2;0 - 7 bit operations
16939 # 1;0 - 7 bit (native) keyboard language
16940 # \E(0 - default character set (the keyboard native language)
16941 # ^O - primary character set
16943 # Reset string 2 sets:
16945 # 4;0 - jump scrolling
16946 # 2;0 - 7 bit operations
16947 # 1;0 - 7 bit (native) keyboard language
16948 # \E(0 - default character set (the keyboard native language)
16950 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
16952 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
16953 rs2=\E[4;0;2;0;1;0v\E(0,
16954 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
16955 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
16956 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
16958 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
16960 enacs@, rmacs=\036FS00,
16961 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16962 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
16964 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
16967 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
16969 # Initialization string 1 sets:
16971 # <0 - scrolling enabled
16972 # <1 - blink enabled
16973 # <2 - horizontal scrolling enabled (for alignment)
16974 # <4 - print characters regardless of attributes
16975 # \E[5;1v - compressed (135 column) mode
16976 # \E[1;1;126 - margins at columns 1 and 126
16978 # 1 - print all characters even if protected
16979 # 6 - character protection disabled
16980 # <2 - horizontal scrolling disabled
16981 # - (should reset scrolling regions, but that glitches the screen)
16983 # Reset string 1 sets:
16984 # \Ec - initial mode defaults (RIS)
16985 # \E[5;1v - compressed (135 column) mode
16986 # \E[1;1;126w - margins at columns 1 and 126
16987 # \E[<2h - horizontal scrolling disabled
16989 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
16991 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16992 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
16994 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
16996 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16997 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
16999 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
17002 # These add intelligent features like scrolling regions.
17003 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
17004 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
17005 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
17006 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
17007 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
17009 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
17010 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
17011 vpa=\036FPFF%p1%2.2X,
17012 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
17013 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
17015 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
17017 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
17019 rs2=\036P@1\036FK\036FX0083,
17020 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
17021 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
17023 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
17026 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
17027 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
17029 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
17031 clear=\036FG\036PH, fsl=\036F}01\022,
17032 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
17033 tsl=\036F}00\036FP%p1%2.2X18\036PG,
17034 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
17035 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
17038 # Relative cursor motions are confined to the current window,
17039 # which is not what the scrolling region specification expects.
17040 # Thus, relative vertical cursor positioning must be deleted.
17041 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
17042 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
17044 cud1@, cuu1@, ll@, use=d462+,
17046 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
17048 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
17050 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
17052 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
17054 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
17057 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
17059 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
17061 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
17063 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
17065 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
17068 d430c-dg|d430-dg|Data General D430C in DG mode,
17069 use=d413-dg, use=dg+fixed,
17070 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
17071 use=d413-dg, use=dg+ccc,
17073 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
17074 use=d413-unix, use=dgunix+fixed,
17075 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
17076 use=d413-unix-w, use=dgunix+fixed,
17077 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
17078 use=d413-unix-25, use=dgunix+fixed,
17079 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
17080 use=d413-unix-s, use=dgunix+fixed,
17081 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
17082 use=d413-unix-sr, use=dgunix+fixed,
17083 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
17084 use=d413-unix, use=dgunix+ccc,
17085 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
17086 use=d413-unix-w, use=dgunix+ccc,
17087 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
17088 use=d413-unix-25, use=dgunix+ccc,
17089 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
17090 use=d413-unix-s, use=dgunix+ccc,
17091 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
17092 use=d413-unix-sr, use=dgunix+ccc,
17094 # DASHER D470C color terminal in ANSI mode.
17095 # Like the D460 but with 16 colors and without a compressed mode.
17097 # Initialization string 1 sets:
17099 # <0 - scrolling enabled
17100 # <1 - blink enabled
17101 # <2 - horizontal scrolling enabled (for alignment)
17102 # <4 - print characters regardless of attributes
17103 # \E[1;1;80w - margins at columns 1 and 80
17105 # 1 - print all characters even if protected
17106 # 6 - character protection disabled
17107 # <2 - horizontal scrolling disabled
17108 # - (should reset scrolling regions, but that glitches the screen)
17110 d470c|d470|Data General DASHER D470C,
17111 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17112 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17113 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
17114 use=dg+color, use=d460,
17116 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
17117 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17118 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17119 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
17120 use=dg+color, use=d460-7b,
17122 # Initialization string 2 sets:
17123 # ^^FQ2 - default cursor (solid rectangle)
17124 # ^^FW - character protection disabled
17125 # ^^F\^ - horizontal scrolling enabled (for alignment)
17126 # ^^FX004? - margins at columns 0 and 79
17127 # ^^F] - horizontal scrolling disabled
17128 # ^^O - primary character set
17129 # ^^FS00 - default character set (the keyboard native language)
17130 # - (should reset scrolling regions, but that glitches the screen)
17132 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
17133 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
17135 use=dgmode+color, use=d460-dg,
17137 # DASHER D555 terminal in ANSI mode.
17138 # Like a D411, but has an integrated phone.
17139 d555|Data General DASHER D555,
17141 d555-7b|Data General DASHER D555 in 7-bit mode,
17143 d555-w|Data General DASHER D555 in wide mode,
17145 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
17147 d555-dg|Data General DASHER D555 series in DG mode,
17150 # DASHER D577 terminal in ANSI mode.
17151 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
17152 d577|Data General DASHER D577,
17154 d577-7b|Data General DASHER D577 in 7-bit mode,
17156 d577-w|Data General DASHER D577 in wide mode,
17158 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
17161 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
17164 # DASHER D578 terminal.
17165 # Like a D577, but without compressed mode; like a D470C in this respect.
17167 # Initialization string 1 sets:
17169 # <0 - scrolling enabled
17170 # <1 - blink enabled
17171 # <2 - horizontal scrolling enabled (for alignment)
17172 # <4 - print characters regardless of attributes
17173 # \E[1;1;80w - margins at columns 1 and 80
17175 # 1 - print all characters even if protected
17176 # 6 - character protection disabled
17177 # <2 - horizontal scrolling disabled
17178 # - (should reset scrolling regions, but that glitches the screen)
17180 d578|Data General DASHER D578,
17181 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
17182 d578-7b|Data General DASHER D578 in 7-bit mode,
17183 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
17185 #### Datamedia (dm)
17187 # Datamedia was headquartered in Nashua, New Hampshire until it went
17188 # out of business in 1993, but the ID plates on the terminals referred
17189 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
17190 # manufacturer which threw out all information about the terminals.
17193 cs10|colorscan|Datamedia Color Scan 10,
17196 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17197 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
17198 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17199 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
17200 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17201 cs10-w|Datamedia Color Scan 10 with 132 columns,
17203 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
17205 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
17206 dm1520|dm1521|Datamedia 1520,
17208 cols#80, it#8, lines#24,
17209 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
17210 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17211 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
17213 # dm2500: this terminal has both <ich> and <smir>. Applications using
17214 # termcap/terminfo directly (rather than through ncurses) might be confused.
17215 dm2500|datamedia2500|Datamedia 2500,
17218 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
17219 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
17220 dch1=\020\010\030\035$<10*>,
17221 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
17222 ich1=\020\034\030\035$<10*>,
17223 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
17224 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
17225 smdc=^P, smir=^P, smso=^N,
17226 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
17227 # also, has a meta-key.
17228 # From: <goldberger@su-csli.arpa>
17229 # (dmchat: ":MT:" changed to ":km:" -- esr)
17230 dmchat|dmchat version of Datamedia 2500,
17232 dl1=\020\032\030\035$<2/>,
17233 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
17234 # (dm3025: ":MT:" changed to ":km:" -- esr)
17235 dm3025|Datamedia 3025a,
17237 cols#80, it#8, lines#24,
17238 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17239 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17240 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
17241 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
17242 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
17243 smir=\EP, smso=\EO1,
17244 dm3045|Datamedia 3045a,
17245 OTbs, am, eo, km@, ul, xenl,
17246 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
17247 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
17248 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
17249 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
17251 # Datamedia DT80 soft switches:
17252 # 1 0=Jump 1=Smooth
17253 # Autorepeat 0=off 1=on
17254 # Screen 0=Dark 1=light
17255 # Cursor 0=u/l 1=block
17257 # 2 Margin Bell 0=off 1=on
17258 # Keyclick 0=off 1=on
17259 # ANSI/VT52 0=VT52 1=ANSI
17260 # Xon/Xoff 0=Off 1=On
17262 # 3 Shift3 0=Hash 1=UK Pound
17264 # Newline 0=Off 1=On
17265 # Interlace 0=Off 1=On
17267 # 4 Parity 0=Odd 1=Even
17268 # Parity 0=Off 1=On
17269 # Bits/Char 0=7 1=8
17270 # Power 0=60Hz 1=50Hz
17272 # 5 Line Interface 0=EIA 1=Loop
17273 # Aux Interface 0=EIA 1=Loop
17274 # Local Copy 0=Off 1=On
17277 # 6 Aux Parity 0=Odd 1=Even
17278 # Aux Parity 0=Off 1=On
17279 # Aux Bits/Char 0=7 1=8
17280 # CRT Saver 0=Off 1=On
17281 # dm80/1 is a VT100 lookalike, but it doesn't seem to need any padding.
17282 dm80|dmdt80|dt80|Datamedia dt80/1,
17283 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
17284 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
17285 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
17286 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
17287 smul=\E[4m, use=vt100+4bsd,
17288 # except in 132 column mode, where it needs a little padding.
17289 # This is still less padding than the VT100, and you can always turn on
17290 # the ^S/^Q handshaking, so you can use VT100 flavors for things like
17292 dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode,
17294 clear=\E[H\E[2J$<50/>, cud1=\n,
17295 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
17296 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
17297 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
17298 dt80-sas|Datamedia DT803/DTX for SAS usage,
17301 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
17302 bel=^G, clear=^L, cr=\r,
17303 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
17304 cub1=^H, cud1=\EB, cuf1=^\,
17305 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
17306 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
17307 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
17308 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
17309 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
17310 smso=\E$2\004, tbc=\E'0,
17312 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
17313 # These aren't end-all Excel termcaps; but do insert/delete char/line
17314 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
17315 # The naming convention has been bent somewhat, with the use of E? (where
17316 # E is for 'Excel') as # a name. This was done to distinguish the entries
17317 # from the other Datamedias in use here, and yet to associate a model of
17318 # the Excel terminals with the regular datamedia terminals that share
17319 # major characteristics.
17320 excel62|excel64|Datamedia Excel 62,
17321 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17322 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17324 excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode,
17325 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17326 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17328 excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode,
17329 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
17330 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
17331 smir=\E[4h, use=dt80,
17335 # Falco Data Products
17336 # 440 Potrero Avenue
17337 # Sunnyvale, CA 940864-196
17338 # Vox: (800)-325-2648
17339 # Fax: (408)-745-7860
17340 # Net: techsup@charm.sys.falco.com
17342 # Current Falco models as of 1995 are generally ANSI-compatible and support
17343 # emulations of DEC VT-series, Wyse, and TeleVideo types.
17346 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
17347 # This terminal was released around 1983 and was discontinued long ago.
17348 # The standout and underline highlights are the same.
17349 falco|ts1|ts-1|Falco ts-1,
17351 cols#80, it#8, lines#24,
17352 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17353 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17354 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
17355 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17356 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
17357 smir=\Eq, smso=\Eg1, smul=\Eg1,
17358 falco-p|ts1p|ts-1p|Falco ts-1 with paging option,
17359 OTbs, am, da, db, mir, msgr, ul,
17360 cols#80, it#8, lines#24,
17361 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
17362 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
17363 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
17364 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
17365 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
17366 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
17367 smso=\Eg4, smul=\Eg1,
17368 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
17369 ts100|ts100-sp|Falco ts100-sp,
17370 am, mir, msgr, xenl, xon,
17371 cols#80, it#8, lines#24, vt#3,
17372 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17373 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17374 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17375 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17376 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17377 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17378 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
17379 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
17380 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
17381 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17382 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17383 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17384 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17385 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17386 %;m%?%p9%t\016%e\017%;$<2>,
17387 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17388 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17390 ts100-ctxt|Falco ts-100 saving context,
17391 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
17393 #### Florida Computer Graphics
17396 # Florida Computer Graphics Beacon System, using terminal emulator program
17397 # "host.com", as provided by FCG. This description is for an early release
17398 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
17401 # From: David Bryant <cbosg!djb> 1/7/83
17402 beacon|FCG Beacon System,
17405 bel=\ESTART\r\E37\r\EEND\r$<1>,
17406 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
17407 cub1=^H, cud1=\n, cuf1=\EV,
17408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
17409 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
17410 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
17411 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
17412 rmul=\ESTART\r\E60\,0\r\EEND\r,
17413 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
17414 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
17415 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
17416 smul=\ESTART\r\E60\,1\r\EEND\r,
17421 # The f1720a differences from ANSI: no auto margin, destructive
17422 # tabs, # of lines, funny highlighting and underlining
17423 f1720|f1720a|fluke 1720A,
17425 cols#80, lines#16, xmc#1,
17426 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
17427 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
17428 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
17429 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17430 smso=\E[7m, smul=\E[4m,
17432 #### Liberty Electronics (Freedom)
17434 # Liberty Electronics
17435 # 48089 Fremont Blvd
17437 # Vox: (510)-623-6000
17438 # Fax: (510)-623-7021
17440 # From: <faletti@berkeley.edu>
17441 # (f100: added empty <acsc> to suppress a tic warning;
17442 # made this relative to adm+sgr -- note that <invis> isn't
17443 # known to work for f100 but does on the f110. --esr)
17444 f100|freedom|freedom100|Liberty Freedom model 100,
17445 OTbs, am, bw, hs, mir, msgr, xon,
17447 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
17448 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17449 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
17450 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
17451 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
17452 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
17453 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
17454 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17455 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
17456 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
17457 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17458 f100-rv|freedom-rv|Liberty Freedom 100 in reverse video,
17459 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
17460 # The f110 and f200 have problems with vi(1). They use the ^V
17461 # code for the down cursor key. When kcud1 is defined in terminfo
17462 # as ^V, the Control Character Quoting capability (^V in insert mode)
17463 # is lost! It cannot be remapped in vi because it is necessary to enter
17464 # a ^V to to quote the ^V that is being remapped!!!
17466 # f110/f200 users will have to decide whether
17467 # to lose the down cursor key or the quoting capability. We will opt
17468 # initially for leaving the quoting capability out, since use of VI
17469 # is not generally applicable to most interactive applications
17470 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
17471 f110|freedom110|Liberty Freedom 110,
17474 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
17475 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
17476 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
17477 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17478 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
17479 smso=\EG<, tsl=\Ef, use=f100,
17480 f110-14|Liberty Freedom 110 14inch,
17482 f110-w|Liberty Freedom 110 - 132 cols,
17483 cols#132, use=f110,
17484 f110-14w|Liberty Freedom 110 14in/132 cols,
17487 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17488 f200|freedom200|Liberty Freedom 200,
17489 OTbs, am, eslok, hs, mir, msgr, xon,
17490 cols#80, it#8, lines#24, wsl#80,
17491 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
17492 clear=^Z, cnorm=\E.1, cr=\r,
17493 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
17494 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17495 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
17496 flash=\Eo$<200/>\En, fsl=\r, home=^^,
17497 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
17498 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
17499 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17500 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17501 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17502 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
17503 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17504 f200-w|Liberty Freedom 200 - 132 cols,
17505 cols#132, use=f200,
17506 # The f200 has the ability to reprogram the down cursor key. The key is
17507 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
17508 # so powering the terminal off and on will not cause the change to be lost.
17509 f200vi|Liberty Freedom 200 for vi,
17510 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
17511 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
17512 cols#132, use=f200vi,
17516 # Graphon Corporation
17517 # 544 Division Street
17518 # Campbell, CA 95008
17519 # Vox: (408)-370-4080
17520 # Fax: (408)-370-5047
17521 # Net: troy@graphon.com (Troy Morrison)
17524 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
17525 # including one odd hybrid that starts out life on power-up as a character
17526 # terminal, than can be switched to X graphics mode (driven over the serial
17527 # line) by an escape sequence. No info on this beast yet.
17528 # (go140: I added <rmam>/<smam> based on the init string -- esr)
17529 go140|graphon go-140,
17531 cols#80, it#8, lines#24,
17532 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
17533 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17534 ed=\E[J$<10/>, el=\E[K, ht=^I,
17535 if=/usr/share/tabset/vt100, il1=\E[L,
17536 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17537 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
17538 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
17539 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
17540 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
17541 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17542 go140w|graphon go-140 in 132 column mode,
17545 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17547 # Hacked up vt200 termcap to handle GO-225/VT220
17548 # From: <edm@nwnexus.WA.COM>
17549 # (go225: I added <rmam>/<smam> based on the init string -- esr)
17550 go225|go-225|Graphon 225,
17551 OTbs, am, mir, xenl,
17552 cols#80, it#8, lines#25, vt#3,
17553 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
17554 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
17555 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17556 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
17557 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
17558 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17559 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
17560 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
17561 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
17562 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
17563 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
17564 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
17566 #### Harris (Beehive)
17568 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
17569 # Their terminal group is ancient history now (1995) though the parent
17570 # company is still in business.
17573 # Beehive documentation is undated and marked Preliminary and has no figures
17574 # so we must have early Superbee2 (Model 600, according to phone conversation
17575 # with mfr.). It has proved reliable except for some missing padding
17576 # (notably after \EK and <nl> at bottom of screen).
17578 # The key idea is that AEP mode is poison for <cup> & that US's in
17579 # the local memory should be avoided like the plague. That means
17580 # that the 2048 character local buffer is used as 25 lines of 80
17581 # characters, period. No scrolling local memory, folks. It also
17582 # appears that we cannot use naked INS LINE feature since it uses
17583 # US. The sbi fakes <il1> with an 80-space insert that may be too
17584 # slow at low speeds; also spaces get converted to \040 which is
17585 # too long for some programs (not vi). DEL LINE is ok but slow.
17587 # The <nl> string is designed for last line of screen ONLY; cup to
17588 # 25th line corrects the motion inherent in scrolling to Page 1.
17590 # There is one understood bug. It is that the screen appears to
17591 # pop to a new (blank) page after a <nel>, or leave a half-line
17592 # ellipsis to a quad that is the extra 48 memory locations. The
17593 # data received is dumped into memory but not displayed. Not to
17594 # worry if <cup> is being used; the lines not displayed will be,
17595 # whenever the cursor is moved up there. Since <cup> is addressed
17596 # relative to MEMORY of window, nothing is lost; but beware of
17597 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
17598 # therefore, is setenv MORE -c .
17600 # WARNING: Not all features tested.
17602 # Timings are assembled from 3 sources. Some timings may reflect
17603 # SB2/Model 300 that were used if more conservative.
17604 # Tested on a Model 600 at 1200 and 9600 bd.
17606 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
17607 # placed on the keyboard and useless because of AEP, is made
17608 # into a backspace key. In use ESC must be pressed twice (to send)
17609 # and sending ^C must be prefixed by ESC to avoid that weird
17610 # transmit mode associated with ENTER key.
17612 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
17613 # the screen, then it has dropped into ENTER mode; hit
17614 # RESET--ONLINE--!tset.
17616 # As delivered this machine has a FATAL feature that will throw
17617 # it into that strange transmit state (SPOW) if the space bar is
17618 # hit after a CR is received, but before receiving a LF (or a
17621 # The circuits MUST be modified to eliminate the SPOW latch.
17622 # This is done by strapping on chip A46 of the I/O board; cut
17623 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
17624 # chip. This mod has been checked out on a Mod 600 of Superbee II.
17625 # With this modification absurdly high timings on cr are
17628 # NOTE WELL that the rear panel switch should be set to CR/LF,
17631 sb1|Beehive SuperBee,
17632 OTbs, am, bw, da, db, mir, ul, xsb,
17633 cols#80, lines#25, xmc#1,
17634 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
17635 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
17636 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
17637 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
17638 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17639 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17640 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17641 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
17642 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
17643 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
17644 kf0=\E2, kf9=\E1, khome=\EH, kich1=\EQ\EO, krmir=\ER,
17645 lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, rmso=\E_3,
17646 rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, smso=\E_1,
17647 smul=\E_0, tbc=\E3, use=hp+pfk-cr,
17648 sbi|superbee|Beehive SuperBee at Indiana U.,
17650 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
17652 # Alternate (older) description of Superbee - f1=escape, f2=^C.
17653 # Note: there are at least 3 kinds of superbees in the world. The sb1
17654 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
17655 # The sb3 puts garbage on the bottom of the screen when you scroll with
17656 # the switch in the back set to CRLF instead of AEP. This description
17657 # is tested on the sb2 but should work on all with either switch setting.
17658 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
17659 # the other two if you want to try to hit that tiny escape key.
17660 # This description is tricky: being able to use cup depends on there being
17661 # 2048 bytes of memory and the hairy <nl> string.
17662 superbee-xsb|Beehive SuperBee (improved),
17664 cols#80, it#8, lines#25,
17665 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
17666 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
17667 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
17668 home=\EH, ht=^I, hts=\E1,
17669 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
17670 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
17671 rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, use=hp+pfk-cr,
17672 # This loses on lines > 80 chars long, use at your own risk
17673 superbeeic|SuperBee with insert char,
17674 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
17675 sb2|sb3|fixed SuperBee,
17676 xsb@, use=superbee,
17678 #### Beehive Medical Electronics
17680 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
17681 # Regarding your question though; Beehive terminals weren't made by Harris.
17682 # They were made by Beehive Medical Electronics in Utah. They went out of
17683 # business in the early '80s.
17685 # (OK, then, I don't know why a couple of these say "Harris Beehive".)
17688 # Reports are that most of these Beehive entries (except superbee) have not
17689 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
17691 # (bee: <ich1> was empty, which is obviously bogus -- esr)
17692 beehive|bee|Harris Beehive,
17695 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
17696 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
17697 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
17698 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17699 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
17700 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
17701 smir=\EQ, smso=\EdP, smul=\Ed`,
17702 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
17703 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
17704 # look at those spaces in <rmso>/<smso>. Seems strange to me...
17705 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
17706 # really care, cook up one using ^F -- esr)
17707 beehive3|bh3m|beehiveIIIm|Harris Beehive 3m,
17709 cols#80, it#8, lines#20,
17710 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
17711 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
17712 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
17713 beehive4|bh4|Beehive 4,
17716 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
17717 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
17718 # There was an early Australian kit-built computer called a "Microbee".
17719 # It's not clear whether this is for one of those or for a relative
17721 microb|microbee|Micro Bee series,
17723 cols#80, it#8, lines#24,
17724 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17725 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17726 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17727 kcuu1=\EA, kf9=\Ex, khome=\EH, rmso=\Ed@, rmul=\Ed@,
17728 sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, use=hp+pfk-cr,
17730 # 8675, 8686, and bee from Cyrus Rahman
17731 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
17732 ha8675|Harris 8675,
17733 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
17734 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
17735 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
17737 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
17739 ha8686|Harris 8686,
17740 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
17741 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
17742 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
17744 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
17745 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
17746 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
17747 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
17751 # Hazeltine appears to be out of the terminal business as of 1995. These
17752 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
17753 # Harris. They have a hazeltine.com domain (but no web page there ) and can
17757 # 450 East Pulaski Road
17758 # Greenlawn, New York 11740
17760 # As late as 1993, manuals for the terminal product line could still be
17763 # TRW Customer Service Division
17766 # Fairfield, NJ 07007-2078
17768 # They're now (1998) a subsidiary of General Electric, operating under the
17769 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
17770 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
17773 # Since <cuf1> is blank, when you want to erase something you
17774 # are out of luck. You will have to do ^L's a lot to
17775 # redraw the screen. h1000 is untested. It doesn't work in
17776 # vi - this terminal is too dumb for even vi. (The code is
17777 # there but it isn't debugged for this case.)
17778 hz1000|Hazeltine 1000,
17781 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
17783 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
17784 hz1420|Hazeltine 1420,
17787 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
17788 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
17789 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
17791 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
17792 # freakout with out-of-range args and tn3270. No hz since it needs to
17794 hz1500|Hazeltine 1500,
17797 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17798 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
17799 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
17800 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
17801 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
17802 # h1510 assumed to be in sane escape mode. Else use h1500.
17803 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
17804 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
17805 # removed incorrect and overridden ":do=^J:" -- esr)
17806 hz1510|Hazeltine 1510,
17809 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
17810 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
17811 el=\E^O, il1=\E^Z, ind=\n,
17813 # The following switch settings are assumed for normal operation:
17814 # FULL CR U/L_CASE ESCAPE
17815 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
17816 # Other switches may be set for operator convenience or communication
17818 hz1520|Hazeltine 1520,
17819 OTbs, am, bw, msgr,
17821 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
17822 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17823 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
17824 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
17825 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
17826 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
17827 # This version works with the escape switch off
17828 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
17829 hz1520-noesc|Hazeltine 1520 (no escape),
17832 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17833 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
17834 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
17835 # Note: the h1552 appears to be the first Hazeltine terminal which
17836 # is not braindamaged. It has tildes and backprimes and everything!
17837 # Be sure the auto lf/cr switch is set to cr.
17838 hz1552|Hazeltine 1552,
17840 cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
17842 hz1552-rv|Hazeltine 1552 reverse video,
17843 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
17844 # Note: h2000 won't work well because of a clash between upper case and ~'s.
17845 hz2000|Hazeltine 2000,
17848 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
17849 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
17850 il1=~\032$<6>, ind=\n, pad=^?,
17851 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
17852 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
17853 # to work ok. There is one problem though if one types a lot of garbage
17854 # characters very fast vi seems not able to keep up and hangs while trying
17855 # to insert. That's in insert mode while trying to insert in the middle of
17856 # a line. It might be because the Esprit doesn't have insert char and delete
17857 # char as a built in function. Vi has to delete to end of line and then
17858 # redraw the rest of the line.
17859 esprit|Hazeltine Esprit I,
17862 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
17863 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17864 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
17865 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
17866 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
17867 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
17868 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
17869 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
17870 esprit-am|Hazeltine esprit auto-margin,
17872 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
17873 # Vi it seems always wants to send a control J for "do" and it turned out
17874 # that the terminal would work somewhat if the auto LF/CR was turned off.
17875 # (hmod1: removed :dn=~^K: -- esr)
17876 hmod1|Hazeltine Modular 1,
17879 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17880 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
17881 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
17882 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
17884 # Hazeltine Executive 80 Model 30 (1554?)
17885 # from Will Martin <control@ALMSA-1.ARPA> via BRL
17886 # Like VT100, except for different "am" behavior.
17887 hazel|exec80|h80|he80|Hazeltine Executive 80,
17889 cols#80, it#8, lines#24, vt#3,
17890 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
17891 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17892 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
17893 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
17894 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
17895 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
17896 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
17897 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
17898 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
17899 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
17900 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17901 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
17907 ibm327x|line mode IBM 3270 style,
17909 clear=\r\n, el=\r, home=\r,
17911 ibm3101|i3101|IBM 3101-10,
17914 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17915 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17916 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
17917 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
17918 ibm3151|IBM 3151 display,
17919 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
17920 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17921 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17922 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
17923 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
17924 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
17925 # removed kend, knp, kpp -TD
17927 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17928 # Added ich1 (kich1 without ich1 doesn't make sense).
17929 # Added il1 (kil1 without il1 doesn't make sense).
17930 # Added xon (terminal uses XON/XOFF flow control).
17932 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
17933 OTbs, am, mir, msgr, xon,
17934 cols#80, it#8, lines#24,
17935 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
17937 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
17938 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17939 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
17940 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
17941 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17942 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
17943 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
17944 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
17945 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
17946 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
17947 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
17948 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
17949 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
17950 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
17951 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17952 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17953 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
17954 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
17956 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
17957 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
17959 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17960 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
17963 ibm3162|IBM 3162 display,
17964 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
17965 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
17968 # This really should not use setab/setaf, but it is clear that the
17969 # original terminfo does not toggle red/blue colors as in setb/setf.
17970 ibm3164|i3164|IBM 3164,
17972 colors#8, pairs#64,
17973 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
17974 setab=\E4 %p1%{64}%+%c,
17975 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
17976 smcup=\E!9/N\E>B, use=ibm3161,
17978 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
17980 cols#80, it#8, lines#25,
17981 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17983 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
17984 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17985 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17986 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17987 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
17988 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17989 invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q,
17990 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
17991 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
17992 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
17993 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
17994 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
17995 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
17996 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
17997 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
17998 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
17999 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
18000 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H,
18001 kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q,
18002 kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T,
18003 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec,
18004 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18006 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18009 ibmaed|IBM Experimental display,
18010 OTbs, am, eo, msgr,
18011 cols#80, it#8, lines#52,
18012 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
18013 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
18014 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
18015 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18016 rmso=\E0, sgr0=\E0, smso=\E0,
18017 ibm-apl|apl|IBM apl terminal simulator,
18018 lines#25, use=dm1520,
18019 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
18020 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
18021 ibmmono|IBM workstation monochrome,
18023 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
18024 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
18025 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
18026 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
18027 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
18028 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
18030 ibmega|IBM Enhanced Color Display,
18031 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18032 nel=\r\n, use=ibmmono,
18033 # This color scheme is assumed in some recent IBM terminal descriptions
18034 # (green on black, emulated on a 16-color terminal).
18035 ibm+color|IBM color definitions,
18036 colors#8, ncv#3, pairs#64,
18038 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
18039 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
18040 %=%t46m%e%p1%{7}%=%t107m%;,
18041 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
18042 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
18043 %=%t36m%e%p1%{7}%=%t97m%;,
18044 ibm+16color|IBM aixterm color definitions,
18045 colors#16, pairs#0x100,
18046 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
18047 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
18048 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18049 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18050 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18051 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18052 ibm5154|IBM 5154 Color display,
18053 colors#8, ncv@, pairs#64,
18054 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18056 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
18057 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
18059 ibmvga-c|IBM VGA display color termcap,
18060 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18061 nel=\r\n, use=ibmega-c,
18062 ibmvga|IBM VGA display,
18063 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18064 nel=\r\n, use=ibmega,
18065 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
18066 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
18068 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
18069 ibm6155|IBM 6155 Black & White display,
18070 blink@, bold@, use=ibm5151,
18071 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
18072 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
18074 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
18075 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
18077 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
18079 ibm6154|IBM 6154 Color displays,
18080 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18081 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18083 sgr0=\E[0;10m, use=ibm5154,
18084 ibm6153|IBM 6153 Black & White display,
18085 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18086 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18088 sgr0=\E[0;10m, use=ibm5151,
18089 ibm6153-90|IBM 6153 Black & White display (36-line),
18091 blink@, bold@, use=ibm5151,
18092 ibm6153-40|IBM 6153 Black & White display (12-line),
18093 cols#40, lines#12, use=ibm6153-90,
18094 ibm8512|ibm8513|IBM color VGA Terminal,
18096 cols#80, it#8, lines#25,
18097 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
18098 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
18099 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
18100 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
18101 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
18102 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
18103 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
18104 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
18105 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
18106 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
18107 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
18108 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
18109 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18111 hft-c|HFT with Color,
18112 colors#8, pairs#64,
18113 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
18114 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
18115 use=ibm5151, use=ibm+color,
18116 hft-c-old|HFT with Color PC850,
18117 colors#8, pairs#64,
18118 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18120 hft-old|AIWS High Function Terminal,
18123 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
18124 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18125 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
18126 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
18127 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18128 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
18129 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
18130 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
18131 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
18132 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
18133 ibm-system1|system1|IBM system/1 computer,
18136 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
18137 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
18139 # lft-pc850 : IBM Low Function Terminal Device
18140 # lft "supports" underline, bold, and blink in the sense that the lft code
18141 # sets all the right bits. HOWEVER, depending upon the adapter, these
18142 # attributes may or may not be supported by the device driver.
18143 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
18145 cols#80, it#8, lines#25,
18146 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18148 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18149 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18150 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18151 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18152 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
18153 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
18154 il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
18155 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18156 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
18157 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
18158 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
18159 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
18160 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
18161 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
18162 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
18163 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
18164 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
18165 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
18166 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
18167 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
18168 krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l,
18169 rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
18170 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18171 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
18172 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18173 tbc=\E[3g, use=ecma+index,
18174 # "Megapel" refers to the display adapter, which was used with the IBM RT
18176 ibm5081|hft|IBM Megapel Color display,
18177 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
18178 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
18179 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
18182 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
18184 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
18186 ibm8514|IBM 8514/a color VGA display,
18188 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
18189 ibm8514-c|IBM 8514 color display with standout and underline,
18192 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
18193 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
18197 # AIX entries. IBM ships these with AIX 3.2.5.
18198 # -- added rc, sc based on manpage -TD
18199 # -- added rmacs, smacs based on manpage -TD
18200 # Note that we could use ibm+16color, but that is not how IBM defines this one.
18201 aixterm|IBM Aixterm Terminal Emulator,
18202 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, rc=\E8, ri@,
18203 rmacs=\E(B, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18204 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18205 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18206 sgr0=\E[0;10m\E(B, smacs=\E(0, use=ibm6154,
18208 aixterm+sl|status line for AIXterm,
18210 dsl=\E[?E, fsl=\E[?F, tsl=\E[?%p1%dT,
18212 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
18213 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, ri@, s0ds=\E(B,
18215 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18216 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18217 sgr0=\E[0;10m\E(B, use=ibm6153, use=aixterm+sl,
18218 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
18220 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18222 use=ibm6153, use=aixterm+sl,
18223 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
18225 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18227 sgr0=\E[m, smacs@, use=aixterm,
18228 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
18230 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18232 sgr0=\E[m, smacs@, use=aixterm-m,
18234 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
18235 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
18236 use=ibm+16color, use=aixterm,
18238 #### Infoton/General Terminal Corp.
18241 # gt100 sounds like something DEC would come out with. Let's hope they don't.
18242 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
18245 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18246 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
18247 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
18248 ind=\n, rmso=\Ea, smso=\Eb,
18253 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
18254 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
18255 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
18256 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
18258 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
18259 addrinfo|cursor-addressable Infoton,
18260 cup=\037%p1%c%p2%c, home=^H, use=infoton,
18262 # "VISTAR II/HZ Technical Users Manual" (May 1975).
18264 infoton2|cursor-addressable Infoton VISTAR II,
18265 cup=~\021%p2%c%p1%c, home=^H, use=infoton,
18267 # "VISTAR Technical User's Manual" (October 1972).
18269 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
18270 infoton|Infoton VISTAR,
18273 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
18274 ed=^K, ind=\n, ll=^H^\,
18276 # The ICL6402 was actually the Kokusai Display System 6402.
18277 # The 6404 was the KDS7372 (color version of the 6402).
18279 # ICL6404 control codes follow:
18282 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18283 #ctrl-A set SOM position at cursor position
18286 #ctrl-I Horizontal tab
18289 #ctrl-L Cursor right
18290 #ctrl-M Carriage return
18291 #ctrl-N Disable xon/xoff to host
18292 #ctrl-O Enable xon/xoff to host
18293 #ctrl-R Enable bidirectional mode
18294 #ctrl-T Disable bidirectional mode
18295 #ctrl-V Cursor down
18296 #ctrl-Z Clear unprotected data to insert char
18297 #ctrl-^ Cursor home
18300 #ESC lead-in char for multiple character command
18302 #ESC space R execute power on sequence
18303 #ESC ! p1 p2 define scroll region:
18304 # p1 = scroll top line: 20h - 37h
18305 # p1 = scroll bottom line: 20h - 37h
18306 #ESC " unlock keyboard
18307 #ESC # lock keyboard
18308 #ESC $ Semi-graphics mode on
18309 #ESC % Semi-graphics mode off
18310 #ESC & protect mode on
18311 #ESC ' protect mode off
18312 #ESC ( write protect mode off (full intensity)
18313 #ESC ) write protect mode on (half intensity)
18315 #ESC * clear screen
18316 #ESC + clear unprotected data to insert char
18317 #ESC , clear unprotected data to half intensity spaces
18318 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
18319 # p1 = page number 0 - 3
18320 # p2 = row 20h - 7fh
18321 # p3 = column (lo) 20h - 7fh
18322 # p4 = column (hi) 20h - 21h (only 132 col)
18323 #ESC . p1 set cursor style:
18324 # p1 = 0 invisible cursor
18325 # p1 = 1 block blinking cursor
18326 # p1 = 2 block steady cursor
18327 # p1 = 3 underline blinking cursor
18328 # p1 = 4 underline steady cursor
18329 #ESC / transmit cursor location (page, row, column)
18330 #ESC 0 p1 p2 p3 p4 program edit key:
18331 # p1 = edit key code: '@'-'S', '`'-'s'
18332 # p2 p3 p4 = program data (3 bytes)
18335 #ESC 2 clear tab at cursor
18336 #ESC 3 clear all tabs
18337 #ESC 4 send unprotect line to cursor
18338 #ESC 5 send unprotect page to cursor
18339 #ESC 6 send line to cursor
18340 #ESC 7 send page to cursor
18341 #ESC 8 n set scroll mode:
18342 # n = 0 set jump scroll
18343 # n = 1 set smooth scroll
18344 #ESC 9 n control display:
18345 # n = 0 display off
18347 #ESC : clear unprotected data to null
18348 #ESC ; clear unprotected data to insert char
18351 #ESC = p1 p2 address cursor to row, column
18352 # p1 = row 20h - 7fh
18353 # p2 = column (lo) 20h - 7fh
18354 # p3 = column (hi) 20h - 21h (only 132 col)
18355 #ESC > keyclick off
18356 #ESC ? transmit cursor location (row, column)
18358 #ESC @ copy print mode on
18359 #ESC A copy print mode off
18360 #ESC B block mode on
18361 #ESC C block mode off (conversation mode)
18362 #ESC D F set full duplex
18363 #ESC D H set half duplex
18365 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
18366 # 0 = black, 1 = red, 2 = green, 3 = yellow
18367 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
18368 #ESC G n set serial field attribute (n = 30h - 3Fh)
18369 #ESC H n full graphics mode:
18370 # n = 0 exit full graphics mode
18371 # n = 1 enter full graphics mode
18374 #ESC K forward page
18376 #ESC L unformatted page print
18377 #ESC M L move window left (132 col mode only)
18378 #ESC M R move window right (132 col mode only)
18379 #ESC N set page edit (clear line edit)
18380 #ESC O set line edit (clear page edit)
18381 #ESC P formatted page print
18382 #ESC Q character insert
18384 #ESC S send message unprotected only
18385 #ESC T erase line to insert char
18386 #ESC U set monitor mode (see ESC X, ESC u)
18388 #ESC V n select video attribute mode:
18389 # n = 0 serial field attribute mode
18390 # n = 1 parallel character attribute mode
18391 #ESC V 2 n define line attribute:
18392 # n = 0 single width single height
18393 # n = 1 single width double height
18394 # n = 2 double width single height
18395 # n = 3 double width double height
18396 #ESC V 3 n select character font:
18397 # n = 0 system font
18398 # n = 1 user defined font
18399 #ESC V 4 n select screen mode:
18400 # n = 0 page screen mode
18401 # n = 1 virtual screen mode
18402 #ESC V 5 n control mouse mode:
18403 # n = 0 disable mouse
18404 # n = 1 enable sample mode
18405 # n = 2 send mouse information
18406 # n = 3 enable request mode
18407 #ESC W character delete
18408 #ESC X clear monitor mode (see ESC U, ESC u)
18409 #ESC Y erase page to insert char
18411 #ESC Z n send user/status line:
18412 # n = 0 send user line
18413 # n = 1 send status line
18414 # n = 2 send terminal ID
18415 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
18419 # 3 = blink blank (= blank)
18421 # 5 = reverse blank
18422 # 6 = reverse blink
18423 # 7 = reverse blink blank (= reverse blank)
18425 # 9 = underline blank
18426 # : = underline blink
18427 # ; = underline blink blank
18428 # < = reverse underline
18429 # = = reverse underline blank
18430 # > = reverse underline blink
18431 # ? = reverse underline blink blank
18432 # p2, p3: f/grnd, b/grnd colour
18433 # (see ESC F for colours)
18434 # use ZZ for mono, eg.
18435 # ESC [ 0 Z Z for normal
18436 # ESC [ 4 Z Z for inverse etc.
18438 #ESC \ n set page size:
18439 # n = 1 24 lines/page
18440 # n = 2 48 lines/page
18441 # n = 3 72 lines/page
18442 # n = 4 96 lines/page
18443 #ESC ] n set Wordstar mode:
18444 # n = 0 normal (KDS7372) mode
18445 # n = 1 Wordstar mode
18447 #ESC b set foreground colour screen
18449 #ESC c n enter self-test mode:
18450 # n = 0 exit self test mode
18454 # n = 4 screen display test
18455 # n = 5 main/printer port test
18456 # n = 6 mouse port test
18457 # n = 7 graphics board test
18458 # n = 8 graphics memory test
18459 # n = 9 display all 'E'
18460 # n = : display all 'H'
18461 #ESC d set background colour screen
18463 #ESC e n program insert char (n = insert char)
18464 #ESC f text CR load user status line with 'text'
18466 #ESC g display user status line on 25th line
18467 #ESC h display system status line on 25th line
18469 #ESC j reverse linefeed
18470 #ESC k n duplex/local edit mode:
18471 # n = 0 duplex edit mode
18472 # n = 1 local edit mode
18473 #ESC l n select virtual screen:
18476 #ESC m save current config to NVRAM
18477 #ESC n p1 select display screen:
18482 #ESC o p1 p2 set characters/line and attribute:
18483 # p1 = 0 80 chars/line
18485 #ESC o p1 p2 set characters/line and attribute:
18486 # p1 = 0 80 chars/line
18487 # p1 = 1 132 chars/line
18488 # p2 = 0 single width single height
18489 # p2 = 1 single width double height
18490 # p2 = 2 double width single height
18491 # p2 = 3 double width double height
18493 #ESC q insert mode on
18494 #ESC r edit mode on
18495 #ESC s send message all
18496 #ESC t erase line to null
18497 #ESC u clear monitor mode (see ESC U, ESC X)
18498 #ESC v autopage mode on
18499 #ESC w autopage mode off
18500 #ESC x p1 p2 p3 define delimiter code...
18501 #ESC y erase page to null
18503 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
18504 # p1 = starting row
18505 # p2 = starting column
18509 #ESC { p1 p2 p3 p4 configure main port
18510 # (baud, stop bits, parity, word length)
18512 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
18513 # p1 = function key code:
18514 # '1' - ';' normal f1- f11
18515 # '<' - 'F' shifted f1 - f11
18516 # p2 = program mode:
18520 # Ctrl-Y = terminator
18521 # (use Ctrl-P to escape ^P, ^Y )
18523 #ESC } p1 p2 p3 p4 configure printer port
18524 # (baud, stop bits, parity, word length)
18525 #ESC ~ send system status
18527 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
18529 # Entry is by esr going solely on above information and is UNTESTED.
18530 # This actually looks a lot like a TeleVideo 9xx.
18531 # This entry uses page 0 and is monochrome; I'm not brave enough to try
18532 # to make color work without a test terminal. The <am> capability is a guess.
18533 # The initialization string sets conversation mode, blinking underline cursor,
18534 # full duplex, parallel attribute mode, display user status line, white
18535 # foreground, black background, normal highlight.
18537 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
18540 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
18541 cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c,
18542 cub1=^H, cud1=^V, cuf1=^L,
18543 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
18544 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
18545 hts=\E1, il1=\EE, invis=\E[1ZZ,
18546 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
18547 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
18548 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
18549 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
18550 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
18551 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
18552 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
18553 rs2=\Eo1, use=icl6404,
18555 #### Interactive Systems Corp
18557 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
18558 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
18559 # bought out by Sun.
18562 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
18563 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
18564 # ":le=^_:" later overridden -- esr)
18565 intext|Interactive Systems Corporation modified owl 1200,
18567 cols#80, it#8, lines#24, xmc#1,
18568 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
18569 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
18570 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
18571 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
18572 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
18573 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
18574 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
18575 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036:\264\026%%,
18577 intext2|intextii|INTERACTIVE modified owl 1251,
18579 cols#80, lines#24, xmc#0,
18580 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
18581 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18582 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
18583 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
18584 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
18585 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
18586 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
18587 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
18588 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
18589 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
18590 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
18593 #### Kimtron (abm, kt)
18595 # Kimtron seems to be history, but as March 1998 these people are still
18596 # offering repair services for Kimtron equipment:
18598 # Com/Pair Monitor Service
18599 # 1105 N. Cliff Ave.
18600 # Sioux Falls, South Dakota 57103
18602 # WATS voice: 1-800/398-4946
18603 # POTS fax: +1 605/338-8709
18604 # POTS voice: +1 605/338-9650
18605 # Email: <compair@sd.cybernex.net>
18606 # Internet/Web: <http://www.com-pair.com>
18608 # Kimtron entries include (undocumented) codes for: enter dim mode,
18609 # enter bold mode, enter reverse mode, turn off all attributes.
18612 # Kimtron ABM 85 added by Dual Systems
18613 # (abm85: removed duplicated ":kd=^J:" -- esr)
18614 abm85|Kimtron ABM 85,
18615 OTbs, am, bw, msgr,
18616 cols#80, it#8, lines#24, xmc#1,
18617 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
18618 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18619 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
18620 if=/usr/share/tabset/stdcrt, il1=\EE,
18621 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
18622 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
18623 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
18624 # Kimtron ABM 85H added by Dual Systems.
18625 # Some notes about the abm85h entries:
18626 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
18627 # firmware revs prior to SP51
18628 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
18629 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
18630 # in some places and NOT software settable i.e., <is2> can't fix it)
18631 # 3) In 85h mode, the arrow keys and special functions transmit when
18632 # the terminal is in dup-edit, and work only locally in local-edit.
18633 # Vi won't swallow `del char' for instance, but <smcup> turns on
18634 # dup-edit anyway so that the arrow keys will work right. If the
18635 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
18636 # <is2>. Note that 920E mode does not have software commands to toggle
18637 # between dup and local edit, so you get whatever was set last on the
18639 # 4) <flash> attribute is nice, but seems too slow to work correctly
18641 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
18642 # are selected, the <xmc@> entry should be removed.
18643 # 6) auto new-line should be on (selectable from setup mode only)
18645 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
18646 abm85h|Kimtron ABM 85H native mode,
18649 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
18651 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
18653 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
18655 abm85e|Kimtron ABM 85H in 920E mode,
18657 bel=^G, dim=\E), flash@,
18658 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
18660 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18661 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
18664 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
18666 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18667 # From: <malman@bbn-vax.arpa>
18668 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
18669 kt7|kimtron model kt-7,
18671 cols#80, it#8, lines#24,
18672 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
18673 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18674 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
18675 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
18676 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
18677 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
18678 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18679 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18680 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
18681 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
18682 # other kt7 entry and the adjacent key capabilities). Removed EE which is
18683 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
18684 # but we can't figure out what.
18685 kt7ix|kimtron model kt-7 or 70 in IX mode,
18687 cols#80, it#8, lines#25,
18688 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
18689 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
18690 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18691 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
18692 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
18693 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
18694 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
18695 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
18696 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18697 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
18698 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
18699 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
18701 #### Microdata/MDIS
18703 # This was a line of terminals made by McDonnell-Douglas Information Systems.
18704 # These entries come direct from MDIS documentation. I have edited them only
18705 # to move primary names of the form p[0-9] * to aliases, and to comment out
18706 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
18707 # also removed the change history; the last version indicates this is
18708 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
18711 # McDonnell Information Systems Terminal Family History
18712 # =========================================
18714 # Prism-1, Prism-2 and P99:
18715 # Ancient Microdata and CMC terminals, vaguely like ADDS Regent 25.
18717 # Prism-4 and Prism-5:
18718 # Slightly less ancient range of Microdata terminals. Follow-on from
18719 # Prism-2, but with many enhancements. P5 has eight display pages.
18722 # A special terminal for use with library systems, primarily in Germany.
18723 # Limited numbers. Similar functionality to P5 (except attributes?).
18725 # Prism-7, Prism-8 and Prism-9:
18726 # More recent range of MDIS terminals, in which P7 and P8
18727 # replace the P4 & P5, with added functionality, and P9 is the flagship.
18728 # The P9 has two emulation modes - P8 and ANSI - and includes a
18729 # large number of the DEC VT220 control sequences. Both
18730 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
18732 # Prism-12 and Prism-14:
18733 # Latest range, functionally very similar to the P9. The P14 has a
18734 # black-on-white overscanning screen.
18736 # The terminfo definitions given here are:
18738 # p2 - Prism-2 (or Prism-1 or P99).
18740 # p4 - Prism-4 (and older P7s & P8s).
18741 # p5 - Prism-5 (or Prism-6).
18744 # p8 - Prism-8 (in national or multinational mode).
18745 # p8-w - 132 column version of p8.
18746 # p9 - Prism-9 in ANSI mode.
18747 # p9-w - 132 column version of p9.
18748 # p9-8 - Prism-9 in Prism-8 emulation mode.
18749 # p9-8-w - As p9-8, but with 132 columns.
18751 # p12 - Prism-12 in ANSI mode.
18752 # p12-w - 132 column version of p12.
18753 # p12-m - Prism-12 in MDC emulation mode.
18754 # p12-m-w - As p12-m, but with 132 columns.
18755 # p14 - Prism-14 in ANSI mode.
18756 # p14-w - 132 column version of p14.
18757 # p14-m - Prism-14 in MDC emulation mode.
18758 # p14-m-w - As p14-m, but with 132 columns.
18763 # Includes Prism-1 and basic P99 without SP or MP loaded.
18764 # The simplest form of Prism-type terminal.
18765 # Basic cursor movement and clearing operations only.
18766 # No video attributes.
18768 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18769 # value up, followed by backspace.
18771 prism2|MDC Prism-2,
18774 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18775 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18776 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18777 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
18778 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18779 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18780 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
18785 # Includes early versions of P7 & P8.
18786 # Basic family definition for most Prisms (except P2 and P9 ANSI).
18788 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18789 # value up, followed by backspace.
18790 # Cursor key definitions removed because they interfere with vi and csh keys.
18792 prism4|p4|P4|MDC Prism-4,
18793 am, bw, hs, mc5i, msgr,
18794 cols#80, lines#24, wsl#72, xmc#1,
18795 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
18796 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18797 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18798 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18799 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
18800 fsl=\035\345, home=^A,
18801 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18802 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18803 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
18804 rev=^CD, rmso=^C\s, rmul=^C\s,
18805 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
18806 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
18807 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
18808 vpa=\013%p1%{32}%+%c,
18813 # Same definition as p4. Includes Prism-6 (not tested!).
18814 # Does not use any multi-page features.
18816 prism5|p5|P5|MDC Prism-5,
18822 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
18824 # Use p4 for very early models of P7.
18825 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18827 prism7|p7|P7|MDC Prism-7,
18828 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
18833 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
18834 # Supports national and multinational character sets.
18836 # Alternate char set operations only work in multinational mode.
18837 # Use p4 for very early models of P8.
18838 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18839 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18841 prism8|p8|P8|MDC Prism-8,
18842 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
18843 vpa=\E[%i%p1%dd, use=p4,
18845 # p8-w: Prism-8 in 132 column mode
18846 # --------------------------------
18848 # 'Wide' version of p8.
18850 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18852 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
18854 is2=\E[<12h\E[<14h, use=p8,
18856 # p9: Prism-9 in ANSI mode
18857 # -------------------------
18859 # The "flagship" model of this generation of terminals.
18860 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
18862 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
18863 # Fixes to deal with terminal firmware bugs:
18864 # . 'ri' uses insert-line since rev index doesn't always
18865 # . 'sgr0' has extra '0' since esc[m fails
18866 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
18867 # Not covered in the current definition:
18869 # . Programming Fn keys
18870 # . Graphic characters (defaults correctly to vt100)
18871 # . Padding values (sets xon)
18872 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18874 prism9|p9|P9|MDC Prism-9 in ANSI mode,
18875 am, bw, hs, msgr, xenl, xon,
18876 cols#80, it#8, lines#24, vt#3, wsl#72,
18877 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
18878 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
18879 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18880 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18881 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18882 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
18883 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
18884 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
18885 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
18886 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
18887 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
18888 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
18889 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
18890 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18891 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
18892 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
18893 rmso=\E[27m, rmul=\E[24m,
18894 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
18897 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
18898 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
18899 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18900 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
18903 # p9-w: Prism-9 in 132 column mode
18904 # --------------------------------
18906 # 'Wide' version of p9.
18908 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
18910 is2=\E[&p\E[<12l\E F\E[<14h,
18911 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
18913 # p9-8: Prism-9 in P8 mode
18914 # ------------------------
18916 # P9 terminal in P8 emulation mode.
18917 # Similar to p8 definition.
18918 # Insertion and deletion operations possible.
18920 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
18921 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18922 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
18924 # p9-8-w: Prism-9 in P8 and 132 column modes
18925 # ------------------------------------------
18927 # P9 terminal in P8 emulation mode and 132 column mode.
18929 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
18930 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18931 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
18933 # p12: Prism-12 in ANSI mode
18934 # ---------------------------
18936 # See p9 definition.
18938 prism12|p12|P12|MDC Prism-12 in ANSI mode,
18941 # p12-w: Prism-12 in 132 column mode
18942 # ----------------------------------
18944 # 'Wide' version of p12.
18946 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
18949 # p12-m: Prism-12 in MDC emulation mode
18950 # -------------------------------------
18952 # P12 terminal in MDC emulation mode.
18953 # Similar to p8 definition.
18954 # Insertion and deletion operations possible.
18956 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
18959 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
18960 # -------------------------------------------------------
18962 # P12 terminal in MDC emulation mode and 132 column mode.
18964 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
18967 # p14: Prism-14 in ANSI mode
18968 # ---------------------------
18970 # See p9 definition.
18972 prism14|p14|P14|MDC Prism-14 in ANSI mode,
18975 # p14-w: Prism-14 in 132 column mode
18976 # ----------------------------------
18978 # 'Wide' version of p14.
18980 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
18983 # p14-m: Prism-14 in MDC emulation mode
18984 # -------------------------------------
18986 # P14 terminal in MDC emulation mode.
18987 # Similar to p8 definition.
18988 # Insertion and deletion operations possible.
18990 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
18993 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
18994 # -------------------------------------------------------
18996 # P14 terminal in MDC emulation mode and 132 column mode.
18998 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
19001 # End of McDonnell Information Systems Prism definitions
19003 # These things were popular in the Pick database community at one time
19004 # From: George Land <georgeland@aol.com> 24 Sep 1996
19005 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
19007 cols#80, lines#24, ma#1, wsl#78, xmc#1,
19008 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
19009 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
19010 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
19011 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
19012 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
19013 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
19014 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19015 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
19016 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
19017 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
19020 #### Microterm (act, mime)
19022 # The mime1 entries refer to the Microterm Mime I or Mime II.
19023 # The default mime is assumed to be in enhanced act iv mode.
19026 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
19027 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
19028 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
19029 # since Sytek insists ^S means xoff.
19030 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
19031 act4|microterm|microterm act iv,
19034 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
19035 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
19036 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
19037 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
19038 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
19040 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
19041 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
19042 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
19043 act5|microterm5|microterm act v,
19044 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
19046 # Mimes using brightness for standout. Half bright is really dim unless
19047 # you turn up the brightness so far that lines show up on the screen.
19048 mime-fb|full bright mime1,
19049 is2=^S\E, rmso=^S, smso=^Y, use=mime,
19050 mime-hb|half bright mime1,
19051 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
19052 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
19053 # the more plausible ":do=^J:" -- esr)
19054 # uc was at one time disabled to get around a curses bug, be wary of it
19055 mime|mime1|mime2|mimei|mimeii|microterm mime1,
19057 cols#80, it#8, lines#24, vt#9,
19058 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
19059 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
19060 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
19061 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
19062 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
19063 # These termcaps (for mime2a) put the terminal in low intensity mode
19064 # since high intensity mode is so obnoxious.
19065 mime2a-s|microterm mime2a (emulating an enhanced Soroc iq120),
19068 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19069 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
19070 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
19071 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
19072 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
19073 smir=\EE, smso=\E:, smul=\E6,
19074 # This is the preferred mode (but ^X can't be used as a kill character)
19075 mime2a|mime2a-v|microterm mime2a (emulating an enhanced VT52),
19077 cols#80, it#8, lines#24,
19078 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19079 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
19080 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
19081 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
19082 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
19083 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
19084 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
19085 mime3a|mime1 emulating 3a,
19087 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
19088 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
19090 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
19092 # Wed Mar 9 18:53:21 1983
19093 # We run our terminals at 2400 baud, so there might be some timing problems at
19094 # higher speeds. The major improvements in this model are the terminal now
19095 # scrolls down and insert mode works without redrawing the rest of the line
19096 # to the right of the cursor. This is done with a bit of a kludge using the
19097 # exit graphics mode to get out of insert, but it does not appear to hurt
19098 # anything when using vi at least. If you have some users using act4s with
19099 # programs that use curses and graphics mode this could be a problem.
19100 mime314|mm314|mime 314,
19103 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
19104 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
19105 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
19106 # Microterm mime 340 from University of Wisconsin
19107 mm340|mime340|mime 340,
19109 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19110 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19111 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
19112 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
19113 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
19114 # This came from University of Wisconsin marked "astro termcap for jooss".
19115 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
19116 # also added <rmam>/<smam> based on the init string -- esr)
19117 mt4520-rv|micro-term 4520 reverse video,
19118 am, hs, msgr, xenl, xon,
19119 cols#80, it#8, lines#24, wsl#80,
19120 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
19121 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19122 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19123 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19124 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19125 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
19126 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
19127 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
19128 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
19130 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19131 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
19132 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
19133 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
19134 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
19135 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
19136 tbc=\E[g, tsl=\E[25;1H,
19138 # Fri Aug 5 08:11:57 1983
19139 # This entry works for the ergo 4000 with the following setups:
19140 # ansi,wraparound,newline disabled, xon/xoff disabled in both
19143 # WARNING!!! There are multiple versions of ERGO 4000 microcode
19144 # Be advised that very early versions DO NOT WORK RIGHT !!
19145 # Microterm does have a ROM exchange program- use it or lose big
19146 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
19147 ergo4000|microterm ergo 4000,
19150 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
19151 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19152 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
19153 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
19154 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
19155 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19156 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
19157 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
19158 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
19159 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
19164 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
19165 # For what happened to that group, see the ADDS section.
19167 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
19170 # The following vendor-supplied termcaps were captured from the Boundless
19171 # Technologies site, 8 March 1998. I removed all-upper-case names that were
19172 # identical, except for case, to lower-case ones. I also uncommented the acsc
19175 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19176 # DEC VT200/300 with color capabilities added.
19177 ncr260intan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard,
19178 colors#8, pairs#64,
19179 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19181 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19182 # DEC VT200/300 with color capabilities added.
19183 ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard (132 column),
19184 colors#8, pairs#64,
19185 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19186 use=ncr260vt300wan,
19187 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19188 # DEC VT200/300 with color capabilities added.
19189 ncr260intpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard,
19190 colors#8, pairs#64,
19191 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19193 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19194 # DEC VT200/300 with color capabilities added.
19195 ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard (132 column),
19196 colors#8, pairs#64,
19197 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19198 use=ncr260vt300wpp,
19199 # This definition for ViewPoint supports several attributes. This means
19200 # that it has magic cookies (extra spaces where the attributes begin).
19201 # Some applications do not function well with magic cookies. The System
19202 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19203 # If supporting various attributes is not vital, 'xmc#1' and the extra
19204 # attributes can be removed.
19205 # Mapping to ASCII character set ('acsc' capability) can also be
19206 # restored if needed.
19207 ncr260vppp|NCR 2900/260 viewpoint,
19208 am, bw, km, mc5i, mir, msgr, xon,
19209 cols#80, lines#24, nlab#32, xmc#1,
19210 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19211 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
19212 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
19213 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
19214 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, ed=\Ek$<2>,
19215 el=\EK$<2>, home=\036$<2>, ht=^I, hts=\E1, il1=\EM$<2>,
19216 ind=\n$<2>, invis=\EG1,
19217 is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19219 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
19220 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
19221 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B:\r,
19222 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
19223 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
19224 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
19225 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
19226 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
19227 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
19228 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
19229 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
19230 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
19231 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
19232 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19233 rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19235 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
19236 smso=\EG4, smul=\EG8, smxon=\Ec21, use=ncr260vp+sl,
19238 ncr260vp+sl|NCR 2900/260 viewpoint with status-line,
19240 dsl=\E`c, fsl=\r, tsl=\EF,
19242 ncr260vpwpp|NCR 2900/260 viewpoint wide mode,
19244 cup=\Ea%i%p1%dR%p2%dC$<30>,
19245 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19247 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19251 ncr260vt100an|NCR 2900/260 VT100 with ANSI keyboard,
19252 am, mir, msgr, xenl, xon,
19253 cols#80, lines#24, nlab#32,
19254 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19255 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19256 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
19257 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
19258 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19259 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19260 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19261 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX,
19262 ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, home=\E[H$<1>,
19263 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19264 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19265 indn=\E[%p1%dE$<5>, invis=\E[8m,
19266 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19268 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19269 khlp=\E[28~, kich1=\E[2~, krdo=\E[29~, nel=\EE$<5>, rc=\E8,
19270 rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
19271 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
19272 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19275 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19276 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19277 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
19278 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
19279 vpa=\E[%p1%dd$<40>, use=vt220+vtedit, use=vt220+cvis,
19280 use=vt220+keypad, use=ncr260vt+sl,
19281 ncr260vt+sl|NCR 2900/260 VT100 status line,
19283 dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
19284 ncr260vt100wan|NCR 2900/260 VT100 wide mode ANSI keyboard,
19286 cup=\E[%i%p1%d;%p2%dH$<30>,
19287 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19289 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19292 ncr260vt100pp|NCR 2900/260 VT100 with PC+ keyboard,
19293 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19295 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19296 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19297 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
19298 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
19299 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19301 smkx=\E=, use=ncr260vt100an,
19302 ncr260vt100wpp|NCR 2900/260 VT100 wide mode PC+ keyboard,
19304 cup=\E[%i%p1%d;%p2%dH$<30>,
19305 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19307 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19310 ncr260vt200an|NCR 2900/260 VT200 with ANSI keyboard,
19311 am, mir, msgr, xenl, xon,
19312 cols#80, lines#24, nlab#32,
19313 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19314 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19315 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
19316 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
19317 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19318 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19319 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19320 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19321 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19322 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19323 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19324 indn=\E[%p1%dE$<5>, invis=\E[8m,
19325 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19327 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19328 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19329 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19330 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
19331 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
19332 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
19333 kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, kf31=\E[6~,
19334 kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf4=\EOS,
19335 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19336 khlp=\E[28~, krdo=\E[29~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
19337 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
19338 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
19340 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19343 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19344 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19345 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19346 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19347 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=vt220+vtedit,
19348 use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
19349 ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard,
19351 cup=\E[%i%p1%d;%p2%dH$<30>,
19352 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
19353 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
19354 ncr260vt200pp|NCR 2900/260 VT200 with PC+ keyboard,
19355 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19356 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19357 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19358 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19360 ncr260vt200wpp|NCR 2900/260 VT200 wide mode PC+ keyboard,
19362 cup=\E[%i%p1%d;%p2%dH$<30>,
19363 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19365 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19368 ncr260vt300an|NCR 2900/260 VT300 with ANSI keyboard,
19369 am, mir, msgr, xenl, xon,
19370 cols#80, lines#24, nlab#32,
19371 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19372 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19373 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
19374 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
19375 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19376 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19377 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19378 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19379 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19380 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19381 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19382 indn=\E[%p1%dE$<5>, invis=\E[8m,
19383 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19385 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19386 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19387 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19388 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
19389 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
19390 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
19391 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~,
19392 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
19393 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i,
19394 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>,
19395 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
19396 rmso=\E[27m, rmul=\E[24m,
19397 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19400 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19401 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19402 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19403 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19404 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=vt220+vtedit,
19405 use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
19406 ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard,
19408 cup=\E[%i%p1%d;%p2%dH$<30>,
19409 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19411 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19414 ncr260vt300pp|NCR 2900/260 VT300 with PC+ keyboard,
19415 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19416 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19417 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19418 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19420 ncr260vt300wpp|NCR260VT300WPP|NCR 2900/260 VT300 wide mode PC+ keyboard,
19422 cup=\E[%i%p1%d;%p2%dH$<30>,
19423 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19425 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19428 # This terminfo file contains color capabilities for the Wyse325 emulation of
19429 # the NCR 2900/260C color terminal. Because of the structure of the command
19430 # (escape sequence) used to set color attributes, one of the fore/background
19431 # colors must be preset to a given value. I have set the background color to
19432 # black. The user can change this setup by altering the last section of the
19433 # 'setf' definition. The escape sequence to set color attributes is
19434 # ESC d y <foreground_color> <background_color> 1
19435 # In addition, the background color can be changed through the desk accessories.
19436 # The capability 'op' sets colors to green on black (default combination).
19438 # NOTE: The NCR Unix System Administrator's Shell will not function properly
19439 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
19440 # capability and recompile if you wish to have it included.
19442 ncr260wy325pp|NCR 2900/260 Wyse 325,
19443 am, bw, km, mc5i, mir, msgr, xon,
19444 colors#16, cols#80, lines#24, ncv#33, nlab#32,
19445 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19446 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
19447 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19448 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19449 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19450 el=\Et$<5>, home=\036$<5>, ht=^I, hts=\E1, il1=\EE$<5>,
19451 ind=\n$<5>, invis=\EG1,
19452 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19454 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19455 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
19456 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
19457 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
19458 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
19459 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
19460 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
19461 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
19462 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19463 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
19464 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19465 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19466 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19467 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19468 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19471 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19472 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19473 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
19474 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
19475 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
19476 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
19477 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
19478 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19480 ncr260wy325wpp|NCR 2900/260 Wyse 325 wide mode,
19482 cup=\Ea%i%p1%dR%p2%dC$<30>,
19483 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19485 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19488 # This definition for Wyse 350 supports several attributes. This means
19489 # that it has magic cookies (extra spaces where the attributes begin).
19490 # Some applications do not function well with magic cookies. The System
19491 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19492 # If supporting various attributes is not vital, 'xmc#1' and the extra
19493 # attributes can be removed.
19494 # Mapping to ASCII character set ('acsc' capability) can also be
19495 # restored if needed.
19496 # In addition, color capabilities have been added to this file. The drawback,
19497 # however, is that the background color has to be black. The foreground colors
19498 # are numbered 0 through 15.
19500 # NOTE: The NCR Unix System Administrator's Shell does not function properly
19501 # with the 'pairs' capability defined as below. If you wish to
19502 # have it included, Un-comment it and recompile (using 'tic').
19504 ncr260wy350pp|NCR 2900/260 Wyse 350,
19505 am, bw, km, mc5i, mir, msgr, xon,
19506 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
19507 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19508 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19509 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19510 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
19511 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>,
19512 ed=\Ey$<5>, el=\Et$<5>, home=\036$<10>, ht=^I, hts=\E1,
19513 il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19514 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19516 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19517 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19518 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19519 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19520 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19521 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19522 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19523 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19524 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19525 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19526 mc0=\EP$<10>, mc4=^T, mc5=^R,
19527 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
19528 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19529 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19530 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19533 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19534 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19535 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
19536 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
19537 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
19538 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
19539 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
19540 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19542 ncr260wy350wpp|NCR 2900/260 Wyse 350 wide mode,
19544 cup=\Ea%i%p1%dR%p2%dC$<30>,
19545 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19547 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19550 # This definition for Wyse 50+ supports several attributes. This means
19551 # that it has magic cookies (extra spaces where the attributes begin).
19552 # Some applications do not function well with magic cookies. The System
19553 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19554 # If supporting various attributes is not vital, 'xmc#1' and the extra
19555 # attributes can be removed.
19556 # Mapping to ASCII character set ('acsc' capability) can also be
19557 # restored if needed.
19558 # (ncr260wy50+pp: originally contained commented-out
19559 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
19560 ncr260wy50+pp|NCR 2900/260 Wyse 50+,
19561 am, bw, km, mc5i, mir, msgr, xon,
19562 cols#80, lines#24, nlab#32, xmc#1,
19563 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19564 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19565 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19566 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
19567 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>,
19568 ed=\EY$<5>, el=\ET$<5>, home=\036$<10>, ht=\011$<5>,
19569 hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19570 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19571 \Ee4\Ex@\E`9\Ee7$<100>,
19572 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19573 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19574 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19575 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19576 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19577 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19578 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19579 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19580 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19581 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19582 mc0=\EP$<10>, mc4=^T, mc5=^R,
19583 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19584 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19585 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19586 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19587 \Ee4\Ex@\E`9\Ee7$<100>,
19588 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
19589 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>,
19591 ncr260wy50+wpp|NCR 2900/260 Wyse 50+ wide mode,
19593 cup=\Ea%i%p1%dR%p2%dC$<30>,
19594 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19595 \Ee4\Ex@\E`9\Ee7$<200>,
19596 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19597 \Ee4\Ex@\E`9\Ee7$<200>,
19599 ncr260wy60pp|NCR 2900/260 Wyse 60,
19600 am, bw, km, mc5i, mir, msgr, xon,
19601 cols#80, lines#24, nlab#32,
19602 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19603 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
19604 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19605 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19606 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19607 el=\Et$<5>, home=\036$<25>, ht=\011$<15>, hts=\E1$<15>,
19608 il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19609 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19610 \Ee4\Ex@\E`9\Ee7$<100>,
19611 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19612 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
19613 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19614 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19615 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
19616 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
19617 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
19618 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
19619 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
19620 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19621 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19622 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
19623 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19624 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19625 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19626 \Ee4\Ex@\E`9\Ee7$<100>,
19627 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
19628 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
19630 ncr260wy60wpp|NCR 2900/260 Wyse 60 wide mode,
19632 cup=\Ea%i%p1%dR%p2%dC$<30>,
19633 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19634 \Ee4\Ex@\E`9\Ee7$<100>,
19635 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19636 \Ee4\Ex@\E`9\Ee7$<100>,
19638 ncr160vppp|NCR 2900/160 viewpoint,
19640 ncr160vpwpp|NCR 2900/160 viewpoint wide mode,
19642 ncr160vt100an|NCR 2900/160 VT100 with ANSI keyboard,
19644 ncr160vt100pp|NCR 2900/160 VT100 with PC+ keyboard,
19646 ncr160vt100wan|NCR 2900/160 VT100 wide mode ANSI keyboard,
19647 use=ncr260vt100wan,
19648 ncr160vt100wpp|NCR 2900/160 VT100 wide mode PC+ keyboard,
19649 use=ncr260vt100wpp,
19650 ncr160vt200an|NCR 2900/160 VT200 with ANSI keyboard,
19652 ncr160vt200pp|NCR 2900/160 VT200 with PC+ keyboard,
19654 ncr160vt200wan|NCR 2900/160 VT200 wide mode ANSI keyboard,
19655 use=ncr260vt200wan,
19656 ncr160vt200wpp|NCR 2900/160 VT200 wide mode PC+ keyboard,
19657 use=ncr260vt200wpp,
19658 ncr160vt300an|NCR 2900/160 VT300 with ANSI keyboard,
19660 ncr160vt300pp|NCR 2900/160 VT300 with PC+ keyboard,
19662 ncr160vt300wan|NCR 2900/160 VT300 wide mode ANSI keyboard,
19663 use=ncr260vt300wan,
19664 ncr160vt300wpp|NCR 2900/160 VT300 wide mode PC+ keyboard,
19665 use=ncr260vt300wpp,
19666 ncr160wy50+pp|NCR 2900/160 Wyse 50+,
19668 ncr160wy50+wpp|NCR 2900/160 Wyse 50+ wide mode,
19669 use=ncr260wy50+wpp,
19670 ncr160wy60pp|NCR 2900/160 Wyse 60,
19672 ncr160wy60wpp|NCR 2900/160 Wyse 60 wide mode,
19674 ncrvt100an|ncrvt100pp|NCR VT100 for the 2900 terminal,
19675 am, hs, mc5i, mir, msgr, xon,
19676 cols#80, it#8, lines#24, nlab#32,
19677 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
19678 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
19679 clear=\E[2J\E[1;1H$<300>, cr=\r,
19680 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
19681 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
19682 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
19683 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
19684 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
19685 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
19686 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
19687 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
19688 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
19690 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
19691 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
19692 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
19693 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
19694 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
19695 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
19696 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
19697 B\E)0\E%/0n\E[P\031$<200>,
19699 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
19700 %p3%|%t;7%;%?%p4%t;5%;m$<120>,
19701 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
19702 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
19704 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
19706 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
19707 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
19708 \E)0\E%/0n\E[P\031$<200>,
19711 # Vendor-supplied NCR termcaps end here
19713 # NCR7900 DIP switches:
19717 # 5 - Parity (Odd/Even)
19718 # 6 - Don't Send or Do Send Spaces
19719 # 7 - Parity Enable
19720 # 8 - Stop Bits (One/Two)
19723 # 1 - Upper/Lower Shift
19724 # 2 - Typewriter Shift
19725 # 3 - Half Duplex / Full Duplex
19726 # 4 - Light/Dark Background
19727 # 5-6 - Carriage Return Without / With Line Feed
19728 # 7 - Extended Mode
19729 # 8 - Suppress Keyboard Display
19732 # 1 - End of line entry disabled/enabled
19733 # 2 - Conversational mode / (Local?) Mode
19734 # 3 - Control characters displayed / not displayed
19735 # 4 - (2-wire?) / 4-wire communications
19736 # 5 - RTS on and off for each character
19737 # 6 - (50Hz?) / 60 Hz
19738 # 7 - Exit after level zero diagnostics
19739 # 8 - RS-232 interface
19742 # 1 - Reverse Channel (yes / no)
19743 # 2 - Manual answer (no / yes)
19744 # 3-4 - Cursor appearance
19745 # 5 - Communication Rate
19746 # 6 - Enable / Disable EXT turnoff
19747 # 7 - Enable / Disable CR turnoff
19748 # 8 - Enable / Disable backspace
19750 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
19751 # reverse, blink, dim, and underline) the appropriate number of bits (by
19752 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
19753 # '@' is (effectively) "or"ed with each attribute to generate the proper third
19754 # character in the <ESC>0 sequence. The <sgr> string implements the following
19757 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
19758 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
19760 # Where: P1 <==> Standout attribute parameter
19761 # P2 <==> Underline attribute parameter
19762 # P3 <==> Reverse attribute parameter
19763 # P4 <==> Blink attribute parameter
19764 # P5 <==> Dim attribute parameter
19765 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
19766 ncr7900i|ncr7900|n7900|NCR 7900 model 1,
19768 cols#80, lines#24, xmc#1,
19769 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
19770 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
19771 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
19772 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
19774 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19776 sgr0=\E0@, smso=\E0Q, smul=\E0`,
19777 ncr7900iv|NCR 7900 model 4,
19780 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
19781 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
19782 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
19783 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
19784 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
19785 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
19786 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
19787 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
19788 # The user can enter a CTRL-B to get out of this locked state.
19789 # In <hpa>, we want to output the character given by the formula:
19790 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
19791 ncr7901|NCR 7901 model,
19794 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
19795 cub1=^H, cud1=\n, cuf1=^F,
19796 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
19798 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
19799 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
19800 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
19801 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19803 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
19804 vpa=\013%p1%{64}%+%c,
19806 # Newbury Data Recording Limited (Newbury Data)
19808 # Have been manufacturing and reselling various peripherals for a long time
19809 # They don't make terminals anymore, but are still in business (in 2007).
19810 # Their e-mail address is at ndsales@newburydata.co.uk
19811 # and their post address is:
19813 # Newbury Data Recording Ltd,
19814 # Premier Park, Road One,
19815 # Winsford, Cheshire, CW7 3PT
19817 # Their technical support is still good, they sent me for free a printed copy
19818 # of the 9500 user manual and I got it just 1 week after I first contacted them
19822 # Manufactured in the early/mid eighties, behaves almost the same as a
19823 # TeleVideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
19824 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
19825 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
19826 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
19827 # recognized: if you type in "ESC !", the next (third) character is not
19828 # echoed, showing that the terminal was actually waiting for a parameter!
19829 ndr9500|nd9500|Newbury Data 9500,
19830 am, bw, hs, mc5i, mir, msgr, ul, xon,
19831 cols#80, lines#24, wsl#79,
19832 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
19833 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
19834 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19835 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
19836 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
19837 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
19838 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
19839 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
19840 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19841 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
19842 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
19843 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19844 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19845 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
19846 pfloc=\E|%{48}%p1%+%c2%p2%s\031,
19847 pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej,
19848 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
19849 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
19850 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
19851 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
19853 ndr9500-nl|NDR 9500 with no status line,
19856 dsl@, fsl@, tsl@, use=ndr9500,
19858 ndr9500-25|NDR 9500 with 25th line enabled,
19859 lines#25, use=ndr9500,
19861 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
19862 lines#25, use=ndr9500-nl,
19864 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
19867 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
19868 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
19869 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
19870 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
19872 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
19873 lines#25, use=ndr9500-mc,
19875 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
19878 dsl@, fsl@, tsl@, use=ndr9500-mc,
19880 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
19881 lines#25, use=ndr9500-mc-nl,
19883 #### Perkin-Elmer (Owl)
19885 # These are official terminfo entries from within Perkin-Elmer.
19888 bantam|pe550|pe6100|Perkin Elmer 550,
19891 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19892 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19893 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
19894 fox|pe1100|Perkin Elmer 1100,
19897 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19898 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19899 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
19900 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
19901 owl|pe1200|Perkin Elmer 1200,
19904 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19905 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19906 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
19907 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
19908 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
19909 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
19910 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
19911 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
19912 pe1251|pe6300|pe6312|Perkin Elmer 1251,
19914 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
19915 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
19916 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19917 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
19918 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
19919 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
19920 # (pe7000m: this had
19921 # rmul=\E!\0, smul=\E!\040,
19922 # which is probably wrong, it collides with kf0
19923 pe7000m|Perkin Elmer 7000 series monochrome monitor,
19926 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
19927 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19928 ed=\EJ, el=\EI, home=\EH, ind=\n,
19929 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
19930 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
19931 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
19932 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
19934 pe7000c|Perkin Elmer 7000 series colour monitor,
19935 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
19936 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
19940 # Sperry Univac has merged with Burroughs to form Unisys.
19943 # This entry is for the Sperry UTS30 terminal running the TTY
19944 # utility under control of CP/M Plus 1R1. The functionality
19945 # provided is comparable to the DEC VT100.
19946 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
19947 uts30|Sperry UTS30 with cp/m@1R1,
19949 cols#80, lines#24, wsl#40,
19950 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19951 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
19952 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
19953 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19954 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19955 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
19956 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
19957 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
19958 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
19959 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
19960 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
19961 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
19962 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
19963 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
19964 smul=\E[4m, tsl=\E], uc=\EPB,
19968 # Tandem builds these things for use with its line of fault-tolerant
19969 # transaction-processing computers. They aren't generally available
19970 # on the merchant market, and so are fairly uncommon.
19973 tandem6510|adm3a repackaged by Tandem,
19976 # A funny series of terminal that TANDEM uses. The actual model numbers
19977 # have a fourth digit after 653 that designates minor variants. These are
19978 # natively block-mode and rather ugly, but they have a character mode which
19979 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
19980 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
19981 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
19982 tandem653|t653x|Tandem 653x multipage terminal,
19983 OTbs, am, da, db, hs,
19984 cols#80, lines#24, wsl#64, xmc#1,
19985 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
19986 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
19987 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
19988 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
19990 #### Tandy/Radio Shack
19992 # Tandy has a line of VDTs distinct from its microcomputers.
19995 dmterm|deskmate terminal,
19998 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
19999 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20000 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
20001 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
20002 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
20003 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
20004 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
20005 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
20007 dt100|dt-100|Tandy DT-100 terminal,
20009 cols#80, lines#24, xmc#1,
20010 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
20011 cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
20012 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20013 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20014 ich1=\E[@, il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B,
20015 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
20016 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
20017 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
20018 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
20019 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
20020 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
20022 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
20023 cols#132, use=dt100,
20024 dt110|Tandy DT-110 emulating ANSI,
20027 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
20028 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20029 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20030 dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0,
20031 home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n,
20032 is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20033 kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~,
20034 kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~,
20035 kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~,
20036 kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
20037 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m,
20038 rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
20040 pt210|TRS-80 PT-210 printing terminal,
20043 bel=^G, cr=\r, cud1=\n, ind=\n,
20045 #### Tektronix (tek)
20047 # Tektronix tubes are graphics terminals. Most of them use modified
20048 # oscilloscope technology incorporating a long-persistence green phosphor,
20049 # and support vector graphics on a main screen with an attached "dialogue
20050 # area" for interactive text.
20053 tek|tek4012|Tektronix 4012,
20056 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
20057 ff=\014$<1000>, is2=\E^O,
20058 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20059 tek4013|Tektronix 4013,
20060 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
20061 tek4014|Tektronix 4014,
20063 is2=\E\017\E9, use=tek4012,
20064 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20065 tek4015|Tektronix 4015,
20066 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
20067 tek4014-sm|Tektronix 4014 in small font,
20068 cols#121, lines#58,
20069 is2=\E\017\E:, use=tek4014,
20070 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20071 tek4015-sm|Tektronix 4015 in small font,
20072 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
20073 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
20075 # You need to have "stty nl2" in effect. Some versions of tset(1) know
20076 # how to set it for you.
20078 # It's got the Magic Cookie problem around stand-out mode. If you can't
20079 # live with Magic Cookie, remove the :so: and :se: fields and do without
20080 # reverse video. If you like reverse video stand-out mode but don't want
20081 # it to flash, change the letter 'H' to 'P' in the :so: field.
20082 tek4023|Tektronix 4023,
20084 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
20085 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
20086 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
20087 rmso=^_@, smso=^_P,
20088 # It is recommended that you run the 4025 at 4800 baud or less;
20089 # various bugs in the terminal appear at 9600. It wedges at the
20090 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
20091 # on keyboard don't work. You have to hit BREAK twice to get
20092 # one break at any speed - this is a documented feature.
20093 # Can't use cursor motion because it's memory relative, and
20094 # because it only works in the workspace, not the monitor.
20095 # Same for home. Likewise, standout only works in the workspace.
20097 # <el> was commented out since vi and rogue seem to work better
20098 # simulating it with lots of spaces!
20100 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
20101 # and didn't seem necessary.
20103 tek4024|tek4025|tek4027|Tektronix 4024/4025/4027,
20105 cols#80, it#8, lines#34, lm#0,
20106 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
20107 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
20108 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
20109 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
20110 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
20111 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
20112 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
20114 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20115 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
20117 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
20118 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
20119 tek4025-17|Tektronix 4025 17 line window,
20120 lines#17, use=tek4025,
20121 tek4025-17-ws|Tektronix 4025 17 line window in workspace,
20122 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
20123 \r\037wor\s17\r\037mon\s17\r,
20124 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
20125 smso=\037att e\r, use=tek4025-17,
20126 tek4025-ex|tek4027-ex|Tektronix 4025/4027 w/!,
20127 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
20128 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20130 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
20131 # The following status modes are assumed for normal operation (replace the
20132 # initial "!" by whatever the current command character is):
20133 # !COM 29 # NOTE: changes command character to GS (^])
20139 # ^]STO 9 17 25 33 41 49 57 65 73
20140 # Other modes may be set according to communication requirements.
20141 # If the command character is inadvertently changed, termcap can't restore it.
20142 # Insert-character cannot be made to work on both top and bottom rows.
20143 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
20144 # There also seems to be a problem with vertical motion, perhaps involving
20145 # delete/insert-line, following a typed carriage return. This terminal sucks.
20146 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20147 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
20148 # work any more. -- esr)
20149 tek4025a|Tektronix 4025A,
20150 OTbs, OTpt, am, bw, da, db, xon,
20151 cols#80, it#8, lines#34,
20152 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
20153 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
20154 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
20155 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
20156 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
20157 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
20158 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
20159 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
20160 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
20161 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
20162 \s33\s41\s49\s57\s65\s73\035wor\s0;,
20164 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
20165 # Here's the command file that I use to get rogue to work on the 4025.
20166 # It should work with any program using the old curses (e.g. it better
20167 # not try to scroll, or cursor addressing won't work. Also, you can't
20169 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
20170 tek4025-cr|Tektronix 4025 for curses and rogue,
20172 cols#80, it#8, lines#33,
20173 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
20174 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
20175 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20176 rmcup=\037wor 0, smcup=\037wor 33h,
20177 # next two lines commented out since curses only allows 128 chars, sigh.
20178 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
20179 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
20180 tek4025ex|4025ex|4027ex|Tektronix 4025 w/!,
20181 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
20183 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20184 tek4105|Tektronix 4105,
20185 OTbs, am, mir, msgr, ul, xenl, xt,
20186 cols#79, it#8, lines#29,
20187 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
20188 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
20189 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
20190 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20191 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
20192 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
20193 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
20194 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
20195 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
20196 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20197 smul=\E[=5;<2m, tbc=\E[1g,
20199 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
20200 tek4105-30|Tektronix 4015 emulating 30 line VT100,
20201 am, mir, msgr, xenl, xon,
20202 cols#80, it#8, lines#30, vt#3,
20203 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20204 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
20205 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20206 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20207 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20208 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20209 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
20210 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
20211 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
20212 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20213 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
20214 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
20215 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
20216 %;m%?%p9%t\016%e\017%;$<2>,
20217 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
20218 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
20221 # Tektronix 4105 from BRL
20222 # The following setup modes are assumed for normal operation:
20223 # CODE ansi CRLF no DABUFFER 141
20224 # DAENABLE yes DALINES 30 DAMODE replace
20225 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
20226 # FLAGGING input INSERTREPLACE replace LFCR no
20227 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
20228 # SELECTCHARSET G1 0 TABS -2
20229 # Other setup modes may be set for operator convenience or communication
20230 # requirements; I recommend
20231 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20232 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20233 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20234 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
20235 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20236 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
20238 # and factory color maps. After setting these modes, save them with NVSAVE. No
20239 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20240 # "IC" cannot be used in combination with "im" & "ei".
20241 # "tek4105a" is just a guess:
20242 tek4105a|Tektronix 4105 (BRL),
20243 OTbs, OTpt, msgr, xon,
20244 OTkn#8, cols#80, it#8, lines#30, vt#3,
20245 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
20246 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
20247 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20248 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20249 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20250 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
20251 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20252 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20253 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
20254 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20255 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20256 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20257 ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20258 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20259 rmso=\E[m, rmul=\E[m,
20260 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20261 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
20262 \E[?7;8h\E[r\E[m\E>,
20263 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20264 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20268 # Tektronix 4106/4107/4109 from BRL
20269 # The following setup modes are assumed for normal operation:
20270 # CODE ansi COLUMNMODE 80 CRLF no
20271 # DABUFFER 141 DAENABLE yes DALINES 32
20272 # DAMODE replace DAVISIBILITY yes ECHO no
20273 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
20274 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
20275 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
20277 # Other setup modes may be set for operator convenience or communication
20278 # requirements; I recommend
20279 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20280 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20281 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20282 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
20283 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20284 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
20286 # and factory color maps. After setting these modes, save them with NVSAVE. No
20287 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20288 # "IC" cannot be used in combination with "im" & "ei".
20289 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
20291 cols#80, it#8, lines#32, vt#3,
20292 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
20293 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
20294 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20295 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20296 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20297 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
20298 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20299 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20300 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
20301 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20302 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20303 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20304 ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20305 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20306 rmso=\E[m, rmul=\E[m,
20307 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20308 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
20309 ;5l\E[?7;8h\E[r\E[m\E>,
20310 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20311 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
20315 # TEK Programmer's Reference
20316 # Part No. 070-4893-00
20318 # 4107/4109 Computer Display Terminal
20321 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
20322 # 0 selects Tek mode, i.e., \E%!0
20323 # 1 selects ANSI mode
20324 # 2 selects ANSI edit-mode
20325 # 3 selects VT52 mode
20327 # One odd thing about the description (which has been unchanged since the 90s)
20328 # is that the cursor addressing is using VT52 mode, and a few others use the
20329 # VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
20330 # the developer used Emacs, which misuses cvvis (this description sets VT52
20331 # mode in that capability).
20332 tek4107|tek4109|Tektronix terminals 4107 4109,
20333 OTbs, am, mir, msgr, ul, xenl, xt,
20334 cols#79, it#8, lines#29,
20335 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
20336 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
20337 cub1=^H, cud1=\n, cuf1=\EC,
20338 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
20339 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
20340 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20341 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
20342 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
20343 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
20344 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
20345 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
20346 smul=\E%!1\E[4m$<2>\E%!0,
20347 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
20348 # see the note attached to tek4207.
20349 tek4207-s|Tektronix 4207 with sysline but no memory,
20351 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
20352 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20353 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20354 is2=\E7\E[?6l\E[2K\E[?6h\E8,
20355 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
20357 # The 4110 series may be a wonderful graphics series, but they make the 4025
20358 # look good for screen editing. In the dialog area, you can't move the cursor
20359 # off the bottom line. Out of the dialog area, ^K moves it up, but there
20360 # is no way to scroll.
20362 # Note that there is a floppy for free from Tek that makes the
20363 # 4112 emulate the VT52 (use the VT52 termcap). There is also
20364 # an expected enhancement that will use ANSI standard sequences.
20366 # 4112 in non-dialog area pretending to scroll. It really wraps
20367 # but vi is said to work (more or less) in this mode.
20369 # 'vi' works reasonably well with this entry.
20371 otek4112|o4112-nd|otek4113|otek4114|Tektronix 4110 series (old),
20374 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
20375 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
20376 # The 4112 with the ANSI compatibility enhancement
20377 tek4112|tek4114|Tektronix 4110 series,
20380 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
20381 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
20382 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
20383 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
20384 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20385 tek4112-nd|Tektronix 4112 not in dialog area,
20387 cuu1=^K, use=tek4112,
20388 tek4112-5|Tektronix 4112 in 5 line dialog area,
20389 lines#5, use=tek4112,
20390 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
20391 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
20392 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
20393 # previously \0410 and \0411 sequences...I don't *think* they were supposed
20394 # to be 4-digit octal -- esr)
20395 tek4113|Tektronix 4113 color graphics with 5 line dialog area,
20398 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
20399 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20401 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
20402 tek4113-34|Tektronix 4113 color graphics with 34 line dialog area,
20404 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
20405 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
20406 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
20407 # :vb: needs enough delay to let you see the background color being toggled.
20408 tek4113-nd|Tektronix 4113 color graphics with no dialog area,
20410 cols#80, it#8, lines#34,
20411 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
20413 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20415 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
20416 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
20417 # This entry is from Tek. Inc. (Brian Biehl)
20418 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
20419 otek4115|Tektronix 4115 (old),
20420 OTbs, am, da, db, eo,
20421 cols#80, it#8, lines#34,
20422 cbt=\E[Z, clear=\E[H\E[2J,
20423 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
20424 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20425 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
20426 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
20428 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
20429 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
20430 kbs=^H, ri=\EM, rmam=\E[?7l,
20431 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
20432 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
20433 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
20435 tek4115|Tektronix 4115 entry with more ANSI capabilities (new),
20438 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
20439 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20440 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20441 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
20442 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
20443 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
20444 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
20445 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m,
20446 rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
20447 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
20449 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20450 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
20451 # The tek4125 emulates a VT100 incorrectly - the scrolling region
20452 # command is ignored. The following entry replaces <csr> with the needed
20453 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
20454 # chokes on; and adds a lot of initialization for the Tektronix dialog area.
20455 # Note that this entry uses all 34 lines and sets the cursor color to green.
20456 # Steve Jacobson 8/85
20457 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
20458 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
20459 tek4125|Tektronix 4125,
20461 csr@, dl1=\E[1M, il1=\E[1L,
20462 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
20463 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
20465 rc@, sc@, smkx=\E=, use=vt100+4bsd,
20467 # From: <jcoker@ucbic>
20468 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
20469 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
20470 # note that if jcoker wasn't confused you may be able to use this one.
20471 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
20472 tek4207|Tektronix 4207 graphics terminal with memory,
20473 am, bw, mir, msgr, ul, xenl,
20474 cols#80, it#8, lines#32,
20475 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
20476 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20477 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
20478 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
20479 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
20480 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20481 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20482 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
20483 rev=\E[7m, ri=\E[T,
20484 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
20485 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
20486 smul=\E[4m, tbc=\E[1g,
20488 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
20489 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
20490 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
20491 tek4404|Tektronix 4404,
20493 cols#80, it#8, lines#32,
20494 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
20495 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20496 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
20497 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
20498 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
20499 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
20500 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20501 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
20502 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
20503 # Some unknown person wrote:
20504 # I added the is string - straight Unix has ESC ; in the login
20505 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
20506 # mode). The is string here cleans up a few things (but not
20508 ct8500|Tektronix ct8500,
20511 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
20512 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
20513 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
20514 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
20515 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
20517 # Tektronix 4205 terminal.
20519 # am is not defined because the wrap around occurs not when the char.
20520 # is placed in the 80'th column, but when we are attempting to type
20521 # the 81'st character on the line. (esr: hmm, this is like the VT100
20522 # version of xenl, perhaps am + xenl would work!)
20524 # Bold, dim, and standout are simulated by colors and thus not allowed
20525 # with colors. The Tektronix color table is mapped into the RGB color
20526 # table by setf/setb. All colors are reset to factory specifications by oc.
20527 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
20528 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
20529 # interval then maps into pre-defined value.
20530 tek4205|Tektronix 4205,
20532 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
20533 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20534 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
20535 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
20536 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20537 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20538 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
20539 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
20540 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
20542 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
20543 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
20544 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
20545 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
20546 1%e%p2%{875}%<%tE:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
20547 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
20548 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE:%eF4%;%?%p4%{125}%<
20549 %t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8
20550 %e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE:%eF
20552 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
20553 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
20554 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
20556 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
20558 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
20559 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
20560 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20561 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20563 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20564 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20566 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
20567 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20568 smul=\E[4m, tbc=\E[1g,
20570 #### Teletype (tty)
20572 # These are the hardcopy Teletypes from before AT&T bought the company,
20573 # clattering electromechanical dinosaurs in Bakelite cases that printed on
20574 # pulpy yellow roll paper. If you remember these you go back a ways.
20575 # Teletype-branded VDTs are listed in the AT&T section.
20577 # The earliest UNIXes were designed to use these clunkers; nroff and a few
20578 # other programs still default to emitting codes for the Model 37.
20581 tty33|tty35|model 33 or 35 teletype,
20584 bel=^G, cr=\r, cud1=\n, ind=\n,
20585 tty37|model 37 teletype,
20587 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
20590 # There are known to be at least three flavors of the tty40, all seem more
20591 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
20592 # awful braindamage, such as printing a visible newline indicator after each
20593 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
20594 # braindamaged but has hope and is described here. The 40-4 is a 3270
20595 # lookalike and beyond hope. The terminal has visible bell but I don't know
20596 # it - it's null here to prevent it from showing the BL character.
20597 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
20598 # a "newline" style terminal (-crmode) vi figures all it needs is nl
20599 # to get crlf, even if <cr> is not ^M.)
20600 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
20601 tty40|ds40|ds40-2|dataspeed40|Teletype dataspeed 40/2,
20604 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
20605 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
20606 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
20607 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
20608 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
20609 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
20610 tty43|model 43 teletype,
20611 OTbs, am, hc, os, xon,
20613 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20618 # You can add <is2=\E<> to put this 40-column mode, though I can't
20619 # for the life of me think why anyone would want to.
20620 scanset|sc410|sc415|Tymshare Scan Set,
20623 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
20624 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20625 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
20626 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
20627 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
20629 #### Volker-Craig (vc)
20631 # If you saw a Byte Magazine cover with a terminal on it during the early
20632 # 1980s, it was probably one of these. Carl Helmers liked them because
20633 # they could crank 19.2 and were cheap (that is, he liked them until he tried
20634 # to program one...)
20637 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
20638 # every other linefeed.
20639 vc303|vc103|vc203|Volker-Craig 303,
20642 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20643 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
20644 kcuu1=^N, ll=\017$<1>W,
20645 vc303a|vc403a|Volker-Craig 303a,
20646 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
20647 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
20648 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
20649 vc404|Volker-Craig 404,
20652 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20653 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20654 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
20655 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
20656 vc404-s|Volker-Craig 404 w/standout mode,
20657 cud1=\n, rmso=^O, smso=^N, use=vc404,
20658 # From: <wolfgang@cs.sfu.ca>
20659 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
20660 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
20663 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
20664 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
20665 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
20666 ich1=\E:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
20667 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
20668 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
20669 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
20670 rmso=\E^_, smso=\E^Y,
20671 vc415|Volker-Craig 415,
20672 clear=^L, use=vc404,
20674 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
20677 #### IBM PC and clones
20680 # The pcplot IBM-PC terminal emulation program is really messed up. It is
20681 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
20682 # doesn't support scrolling regions, ignores add line commands, and ignores
20683 # delete line commands. Consequently, the resulting behavior looks like a
20684 # crude adm3a-type terminal.
20685 # Steve Jacobson 8/85
20686 pcplot|pc-plot terminal emulation program,
20688 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
20689 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
20690 # I've found that my KayPro II, running MDM730, continues to emulate an
20691 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
20692 # system the following termcap entry works well:
20693 # I have noticed a couple of minor glitches, but nothing I can't work
20694 # around. (I added two capabilities from the BRL entry -- esr)
20695 kaypro|kaypro2|kaypro II,
20698 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
20699 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
20700 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
20702 # From IBM, Thu May 5 19:35:27 1983
20703 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
20704 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
20707 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
20708 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
20710 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
20711 OTbs, am, bw, eo, hs, km, msgr, ul,
20712 cols#80, it#8, lines#24,
20713 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
20715 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
20716 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
20717 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20718 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20719 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
20720 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
20721 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20722 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
20723 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
20724 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
20725 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
20726 rmso=\E[m, rmul=\E[m,
20727 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20729 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20733 # Apple II firmware console first, then various 80-column cards and
20734 # terminal emulators. For two cents I'd toss all these in the UFO file
20735 # along with the 40-column apple entries.
20738 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
20739 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
20740 # function of TIC, not the firmware.
20741 # The clear key on a IIgs will do something like clear-screen,
20742 # depending on what you're in.
20743 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
20744 OTbs, am, bw, eo, msgr,
20745 cols#80, it#8, lines#24,
20746 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
20747 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20748 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
20749 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
20751 # Apple //e with 80-column card, entry from BRL
20752 # The modem interface is permitted to discard LF (maybe DC1), otherwise
20753 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
20754 # Auto-wrap does not work right due to newline scrolling delay, which also
20755 # requires that you set "stty cr2".
20756 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
20757 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
20758 # using a terminal emulation program instead of the built-in firmware.
20762 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
20763 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
20764 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
20765 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20767 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
20768 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
20769 apple2e-p|Apple //e via Pascal,
20770 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
20771 kcud1=\n, use=apple2e,
20772 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
20773 # Enable DC3/DC1 flow control with "stty ixon -ixany".
20774 apple-ae|ASCII Express,
20775 OTbs, am, bw, msgr, nxon, xon,
20776 cols#80, it#8, lines#24,
20777 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20778 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20779 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
20780 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20782 appleII|Apple II plus,
20784 cols#80, it#8, lines#24,
20785 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
20786 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
20787 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
20788 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
20789 # Originally by Gary Ford 21NOV83
20790 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
20791 apple-80|Apple II with smarterm 80 col,
20794 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
20795 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
20796 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
20797 apple-soroc|Apple emulating Soroc 120,
20800 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20801 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
20802 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
20803 # From Peter Harrison, Computer Graphics Lab, San Francisco
20804 # ucbvax!ucsfmis!harrison .....uucp
20805 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
20806 # "These two work. If you don't have the inverse video chip for the
20807 # Apple with videx then remove the :so: and :se: fields."
20808 # (apple-videx: this used to be called DaleApple -- esr)
20809 apple-videx|Apple with videx videoterm 80 column board with inverse video,
20811 cols#80, it#8, lines#24,
20812 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
20813 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20814 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
20815 rmso=^Z2, sgr0=^Z2, smso=^Z3,
20816 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
20817 # Apple Cat ][ 212 modem, + more all
20818 # controlled by ASCII Express: Pro.
20819 # From Dave Shaver <isucs1!shaver>
20820 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
20823 acsc=, clear=^L, cuf1=^\,
20824 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20825 flash=^W35^W06, home=^Y,
20826 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
20828 apple-uterm|Ultraterm for Apple micros,
20831 acsc=, clear=^L, cuf1=^\,
20832 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20833 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
20834 # from trwrba!bwong (Bradley W. Wong):
20836 # This entry assumes that you are using an apple with the UCSD Pascal
20837 # language card. SYSTEM.MISCINFO is assumed to be the same as that
20838 # supplied with the standard apple except that screenwidth should be set
20839 # using SETUP to 80 columns. Note that the right arrow is not mapped in
20840 # this termcap entry. This is because that key, on the Apple, transmits
20841 # a ^U and would thus preempt the more useful "up" function of vi.
20844 apple80p|80-column apple with Pascal card,
20847 clear=^Y^L, cuf1=^\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20848 cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H,
20850 # Apple II+ equipped with Videx 80 column card
20852 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
20853 # manually converted by D A Gwyn
20855 # DO NOT use any terminal emulation with this data base, it works directly
20856 # with the Videx card. This has been tested with vi 1200 baud and works fine.
20858 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
20859 # 1 screen, while in R2 ^U doesn't.
20860 # For inverse alternate character set add:
20861 # <smacs>=^O:<rmacs>=^N:
20862 # (apple-v: added it#8 -- esr)
20863 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
20865 cols#80, it#8, lines#24,
20866 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
20867 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20868 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
20869 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
20870 khome=^Y, rmso=^Z2, smso=^Z3,
20871 apple-videx3|vapple|Apple II with 80 col card,
20874 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
20875 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
20876 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20877 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
20878 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
20879 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
20880 aepro|Apple II+ running ASCII Express Pro--vt52,
20883 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
20884 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20886 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
20887 apple-vm80|ap-vm80|Apple with viewmax-80,
20890 clear=\014$<300/>, cuf1=^\:,
20891 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
20892 ed=\013$<300/>, el=^], home=\031$<200/>,
20894 #### Apple Lisa & Macintosh
20897 # (lisa: changed <cvvis> to <cnorm> -- esr)
20898 lisa|Apple Lisa console display (black on white),
20899 OTbs, am, eo, msgr,
20900 cols#88, it#8, lines#32,
20901 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
20902 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
20903 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20904 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
20905 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20906 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20907 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
20908 liswb|Apple Lisa console display (white on black),
20909 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
20910 smso=\E[m, smul=\E[4m, use=lisa,
20912 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
20913 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
20915 # These entries assume that the 'Auto Wraparound' is enabled.
20916 # Xon-Xoff flow control should also be enabled.
20918 # The VT100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
20919 # settings are in non-volatile memory and don't need to be reset upon login.
20920 # Also setting the number of columns glitches the screen annoyingly.
20921 # You can type "reset" to get them set.
20923 lisaterm|Apple Lisa or Lisa/2 running LisaTerm VT100 emulation,
20924 OTbs, OTpt, am, xenl, xon,
20925 OTkn#4, cols#80, it#8, lines#24, vt#3,
20926 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
20927 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20928 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20929 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20930 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
20931 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
20932 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
20933 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20934 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
20935 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
20937 # Lisaterm in 132 column ("wide") mode.
20938 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
20940 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
20941 # Although MacTerminal has insert/delete line, it is commented out here
20942 # since it is much faster and cleaner to use the "lock scrolling region"
20943 # method of inserting and deleting lines due to the MacTerminal implementation.
20944 # Also, the "Insert/delete ch" strings have an extra character appended to them
20945 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
20946 # supported by MacTerminal.
20947 mac|macintosh|Macintosh with MacTerminal,
20950 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
20951 # Lisaterm in 132 column ("wide") mode.
20952 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
20955 #### Radio Shack/Tandy
20958 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
20959 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
20960 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
20961 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
20963 cols#80, it#8, lines#24,
20964 bel=^G, blink=^_", bold=\E:^A, civis=^E\s,
20965 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
20966 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
20967 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
20968 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
20969 sgr0=\037!\E:\0, smso=^_\s, smul=^_",
20970 # (trs2: removed obsolete ":nl=^_:" -- esr)
20971 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
20973 cols#80, it#8, lines#24,
20974 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
20975 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
20976 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
20977 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
20978 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
20979 # (This had extension capabilities
20980 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
20981 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
20982 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
20983 trs16|trs-80 model 16 console,
20985 cols#80, it#8, lines#24,
20986 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
20987 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20988 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20989 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20990 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20991 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
20992 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
20993 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
20994 smacs=\ERG, smso=\ERD,
20996 #### Commodore Business Machines
20998 # Formerly located in West Chester, PA; went spectacularly bust in 1994
20999 # after years of shaky engineering and egregious mismanagement. Made one
21000 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
21001 # C-128, VIC-20). The C-64 is said to have been the most popular machine
21002 # ever (most units sold); they can still be found gathering dust in closets
21006 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
21007 # Added a few more entries, converted caret-type control sequence (^x) entries
21008 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
21009 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
21011 # :as:, :ae: Support for alternate character sets.
21012 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
21013 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
21014 # This one appears to fix a problem I always had with a line ending
21015 # at 'width+1' (I think) followed by a blank line in vi. The blank
21016 # line tended to disappear and reappear depending on how the screen
21017 # was refreshed. Note that this is probably needed only if you use
21018 # something like a Dnet Fterm with the window sized to some peculiar
21019 # dimension larger than 80 columns.
21020 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
21021 # (amiga: removed obsolete :kn#10:,
21022 # also added empty <acsc> to suppress a warning --esr)
21024 OTbs, am, bw, xenl,
21026 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
21027 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
21028 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21029 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21030 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21031 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
21032 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
21033 invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21034 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
21035 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
21036 kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O,
21037 rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
21038 smso=\E[7m, smul=\E[4m, use=ecma+index,
21040 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
21041 # (amiga: added empty <acsc> to suppress a warning.
21042 # I'm told this entry screws up badly with AS225, the Amiga
21043 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
21044 amiga-h|Hans Verkuil's Amiga ANSI,
21047 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
21048 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
21049 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
21050 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
21051 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
21052 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
21053 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
21054 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
21055 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
21056 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
21057 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
21058 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
21059 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
21060 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
21061 smso=\2337m, smul=\2334m,
21063 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
21065 # Pavel Fedin added
21070 amiga-8bit|Amiga ANSI using 8-bit controls,
21071 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
21072 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
21073 kpp=\233T, ri=\215, rin@, use=amiga-h,
21075 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
21076 # requires use of appropriate preferences settings.
21077 amiga-vnc|Amiga using VNC console (black on light gray),
21078 am, da, db, msgr, ndscr,
21079 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
21080 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
21081 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
21082 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
21083 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21084 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21085 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21086 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
21087 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
21089 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
21090 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21091 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
21092 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
21093 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
21094 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
21095 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
21096 rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
21097 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
21098 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
21099 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
21100 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
21101 smso=\E[1m, smul=\E[4m, use=ecma+index,
21103 # MorphOS on Genesi Pegasos
21104 # By Pavel Fedin <sonic_amiga@rambler.ru>
21105 morphos|MorphOS on Genesi Pegasos,
21106 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
21107 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
21108 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
21109 ri=\215, rin@, use=amiga-h,
21111 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
21112 # I'm trying to write a termcap for a commodore b-128, and I'm
21113 # having a little trouble. I've had to map most of my control characters
21114 # to something that unix will accept (my delete-char is a ctrl-t, etc),
21115 # and create some functions (like cm), but thats life.
21116 # The problem is with the arrow keys - right, and up work fine, but
21117 # left deletes the previous character and down I just can't figure out.
21118 # Jove knows what I want, but I don't know what it's sending to me (it
21119 # isn't thats bound to next-line in jove).
21120 # Anybody got any ideas? Here's my termcap.
21121 # DAG -- I changed his "^n" entries to "\n"; see if that works.
21123 commodore|b-128|Commodore B-128 micro,
21125 OTdN#20, cols#80, lines#24, pb#150,
21126 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
21127 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
21128 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
21129 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
21130 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
21135 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
21136 northstar|North Star Advantage,
21140 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
21141 el=\016$<200/>, home=\034\032$<200/>,
21145 # Thu Jul 7 03:55:16 1983
21147 # As an aside, be careful; it may sound like an anomaly on the
21148 # Osborne, but with the 80-column upgrade, it's too easy to
21149 # enter lines >80 columns!
21151 # I've already had several comments...
21152 # The Osborne-1 with the 80-col option is capable of being
21153 # 52, 80, or 104 characters wide; default to 80 for compatibility
21154 # with most systems.
21156 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
21157 osborne-w|osborne1-w|Osborne I in 104-column mode,
21159 cols#104, lines#24,
21160 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21161 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21162 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
21163 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
21164 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
21165 osborne|osborne1|Osborne I in 80-column mode,
21166 OTbs, am, mir, msgr, ul, xhp,
21167 OTdB#4, cols#80, lines#24,
21168 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
21169 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
21170 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
21171 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
21172 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
21174 # Osborne Executive definition from BRL
21175 # Similar to tvi920
21176 # Added by David Milligan and Tom Smith (SMU)
21177 osexec|Osborne executive,
21179 OTug#1, cols#80, lines#24, xmc#1,
21180 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21181 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21182 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
21183 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
21184 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
21185 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
21186 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
21189 #### Console types for obsolete UNIX clones
21191 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
21192 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
21193 # were commercial, Minix an educational tool sold in conjunction with a book.
21194 # Memory-segmentation limits and a strong tendency to look like V7 long after
21195 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
21196 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
21197 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
21198 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
21199 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
21200 # even as single processes under SunOS and the Macintosh OS.
21204 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
21205 minix|minix console (v3),
21206 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
21207 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
21208 \301w\302x\263y\363z\362{\343|\330}\234~\376,
21209 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
21210 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
21211 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
21212 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
21213 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
21214 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
21215 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
21216 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
21217 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
21218 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
21219 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
21220 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
21221 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
21224 minix-3.0|minix console (v3.0),
21225 use=ecma+color, use=minix-1.7,
21228 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
21229 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
21230 minix-1.7|minix console (v1.7),
21232 cols#80, it#8, lines#25,
21233 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
21234 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21235 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21236 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21237 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
21238 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
21239 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21240 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
21241 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
21242 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
21243 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
21244 smso=\E[7m, smul=\E[4m,
21245 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
21246 minix-old|minix-1.5|minix console (v1.5),
21248 cols#80, it#8, lines#25,
21249 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
21250 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21251 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21252 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21253 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
21254 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
21255 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
21256 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
21257 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
21258 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
21259 # The linewrap option can be specified by editing /usr/include/minix/config.h
21260 # before recompiling the minix 1.5 kernel.
21261 minix-old-am|minix console with linewrap,
21264 pc-minix|minix console on an Intel box,
21265 use=klone+acs, use=minix-3.0,
21267 # According to the Coherent 2.3 manual, the PC console is similar
21268 # to a z19. The differences seem to be (1) 25 lines, (2) no status
21269 # line, (3) standout is broken, (4) ins/del line is broken, (5)
21270 # has blinking and bold.
21271 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
21273 cols#80, it#8, lines#25,
21274 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21275 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
21276 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
21277 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
21278 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
21280 # According to the Venix 1.1 manual, the PC console is similar
21281 # to a DEC VT52. Differences seem to be (1) arrow keys send
21282 # different strings, (2) enhanced standout, (3) added insert/delete line.
21283 # Note in particular that it doesn't have automatic margins.
21284 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
21285 # not described here because this derives from an old termcap entry.
21286 pc-venix|venix|IBM PC console running Venix,
21287 cols#80, it#8, lines#25,
21288 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21289 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21290 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
21291 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
21293 #### Miscellaneous microcomputer consoles
21295 # If you know anything more about any of these, please tell me.
21298 # The MAI Basic Four computer was obsolete at the end of the 1980s.
21299 # It may be used as a terminal by putting it in "line" mode as seen on
21300 # one of the status lines.
21301 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
21302 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
21303 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
21304 # used \ED instead.
21305 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
21306 mai|basic4|MAI Basic Four in ANSI mode,
21307 am, da, db, mir, msgr,
21308 cols#82, it#8, lines#25,
21309 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
21310 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
21311 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
21312 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
21313 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
21314 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
21315 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21316 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21317 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
21318 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
21319 smir=\E[4h, smso=\E[7m, smul=\E[4m,
21320 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
21321 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
21323 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
21324 # The Basis 108 was a Apple II clone, manufactured by the "Basis
21325 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
21326 # about 1,5 km from where I live, but doesn't build own computers any
21327 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
21328 # equipped with one or two 5.25" disk drives, had a monochrome and colour
21329 # video output for a TV set or a dedicated monitor and several slots for
21330 # Apple II cards. Basis 108 were quite popular at german schools before
21331 # the advent of the IBM PC. They run, for example, the UCSD Pascal
21332 # development system (which I used even in 1993 to program the steering
21333 # and data recording for our school's experimental solar panel :), Apple DOS
21335 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
21336 basis|BASIS108 computer with terminal translation table active,
21337 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
21338 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
21339 smso=\E(, use=adm3a,
21340 # luna's BMC terminal emulator
21341 luna|luna68k|LUNA68K Bitmap console,
21342 cols#88, lines#46, use=ansi-mini,
21343 megatek|pegasus workstation terminal emulator,
21346 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
21347 # interface (pre-Macintosh by several years) that went nowhere.
21348 xerox820|x820|Xerox 820,
21351 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21352 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
21355 #### Videotex and teletext
21358 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
21359 # \E[?3l 80 columns
21360 # \E[?4l scrolling on
21361 # \E[12h local echo off
21362 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
21363 # \E)0 G1 DEC set (line graphics)
21365 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
21366 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
21367 OTbs, eslok, hs, xenl,
21368 cols#80, it#8, lines#24, wsl#72, xmc#0,
21369 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
21370 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
21371 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
21372 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
21373 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21374 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21375 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
21376 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
21377 is1=\E:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
21378 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
21379 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
21380 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21381 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
21382 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
21383 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
21384 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
21385 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
21386 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
21387 u6=\E[%i%d;%dR, u7=\E[6n,
21389 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
21391 minitel1|minitel 1,
21392 am, bw, eslok, hs, hz, .msgr, G0,
21393 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
21394 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
21395 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21396 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
21397 dsl=\037@A\030\n, el=^X,
21398 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
21399 home=^^, ind=\n, is2=\E;`ZQ\E:iC\E:iE\021, kbs=^SG,
21400 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
21401 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
21402 rev=\E], ri=^K, rmso=\E\\,
21403 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21404 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21405 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
21407 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
21408 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
21409 %tC%e%p1%'@'%+%c%;,
21410 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
21411 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
21412 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
21413 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
21414 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
21415 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
21417 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
21418 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
21419 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
21420 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
21421 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
21422 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
21423 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
21424 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
21425 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
21426 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
21427 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
21428 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
21429 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
21431 minitel1b|minitel 1-bistandard (in 40cols mode),
21433 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
21434 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
21435 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
21436 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
21437 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
21438 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
21439 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
21440 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
21441 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
21442 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
21443 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
21444 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
21445 rmir=\E[4l, smir=\E[4h,
21446 u8=\001%[ABCPtuvwxyz0123456789:;<=>?]\004,
21447 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
21448 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E:|k, .rmkx=\E;jYA,
21449 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
21451 # rmkx posait des problemes (logout en sortant de vi).
21452 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
21453 am@, bw@, eslok@, hz@, msgr, G0,
21454 colors@, cols#80, it#8, pairs@,
21455 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
21456 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
21457 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21458 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
21459 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
21460 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
21461 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
21462 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21463 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
21464 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
21465 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
21467 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
21468 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
21469 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
21470 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
21472 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
21473 smso=\E[7m, smul=\E[4m,
21474 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
21475 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
21476 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
21477 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
21479 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
21480 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
21481 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
21483 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
21485 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
21486 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
21487 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
21488 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
21489 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
21490 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
21491 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
21492 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
21493 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
21494 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
21497 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
21499 bold=\EG, clear=^L\EB,
21500 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
21501 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
21502 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21503 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
21506 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
21509 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
21510 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
21511 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
21512 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
21513 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
21515 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21516 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
21517 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
21518 .u8=\001Cu|\004r, use=minitel1b,
21522 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
21524 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
21525 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
21526 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
21528 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
21529 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
21530 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
21531 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
21533 # Fonctionne par exemple avec Midnight Commander (mc).
21535 minitel2-80|minitel 2 (80cols) avec filets VT100 (DEC),
21537 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
21538 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
21539 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
21541 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21542 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
21543 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
21544 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
21545 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
21546 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
21547 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
21548 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
21549 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
21550 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
21551 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
21552 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
21553 \,+k\,.l\,0\177\,-j,
21556 minitel12-80|minitel 12 (80cols),
21558 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
21560 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
21562 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
21564 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
21565 E0=^O, S0=\E)3\016,
21566 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21567 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
21568 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
21569 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
21570 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
21571 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
21572 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
21573 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
21574 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
21575 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
21576 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
21577 \,\\\,m\,+k\,.l\,0\177\,-j,
21581 # Add these in your ~/.screenrc for inputting some special glyphs like french
21582 # accentuated chars in 40 cols mode:
21584 # bindkey ^YA digraph '`' # Saisi accent grave.
21585 # bindkey ^YB digraph "'" # Saisi accent aigu.
21586 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
21587 # bindkey ^YH digraph '"' # Saisi accent trema.
21589 # bindkey ^Y# stuff \243 # Livre.
21590 # bindkey "^Y\047" stuff \247 # Paragraphe.
21591 # bindkey ^Yj stuff \306 # AE
21592 # bindkey ^Yz stuff \346 # ae
21593 # bindkey ^YKc stuff \347 # c cedille.
21596 screen.minitel1|Screen specific for minitel1,
21598 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
21600 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
21601 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
21602 use=xterm+x11mouse, use=screen4,
21604 screen.minitel1b|Screen specific for minitel1b,
21605 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
21606 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
21607 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
21608 use=screen.minitel1,
21610 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
21611 colors@, ncv@, pairs@,
21612 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
21613 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
21614 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
21615 use=screen.minitel1b,
21617 screen.minitel1-nb|Screen specific for minitel1-nb,
21618 colors@, ncv@, pairs@,
21619 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21620 use=screen.minitel1,
21622 screen.minitel1b-nb|Screen specific for minitel1b-nb,
21623 colors@, ncv@, pairs@,
21624 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21625 use=screen.minitel1b,
21627 # From: Alexandre Montaron, 29 Sep 2016
21629 linux-m1|Linux Minitel 1 "like" Couleurs,
21630 am, bw@, ccc, mir, msgr, xenl,
21631 colors#8, it#8, ncv#16, pairs#64,
21632 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
21633 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
21634 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
21635 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21636 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
21637 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21638 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
21639 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
21640 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
21641 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
21643 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
21644 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
21645 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E\E[A, kent=\EOM,
21646 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
21647 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
21648 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
21649 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
21650 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kil1=\E\E[B,
21651 kmous=\E[M, nel=\EE, oc=\E]R\E]P3FFFF80, op=\E[39;49m,
21652 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
21653 rmpch=\E[10m, rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8],
21654 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21655 smacs=^N, smam=\E[?7h, smir=\E[4h, smpch=\E[11m,
21656 smso=\E[7m, tbc=\E[3g, vpa=\E[%i%p1%dd, .VN=\E[?5l,
21657 .VR=\E[?5h, .am@, .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H,
21658 .rmcup=, .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
21660 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21661 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21662 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21663 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21664 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21665 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21666 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21667 \n\n\n\n\n\n\n\n\n\n,
21668 use=vt220+pcedit, use=vt220+cvis, use=linux+decid,
21670 # 1. Using double-shapes for VT100 graphical chars (eg: mc).
21671 # 2. Native brown color corrected to good yellow color.
21672 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
21673 # 4. Suppressed nonexistent underlined mode (normally as bright).
21674 # 5. ich/ich1 not filled because of non-curses programs.
21676 # 6. Suppressed nonexistent invisible mode.
21677 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
21679 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
21681 colors@, ncv@, pairs@,
21682 acsc@, bold=\E[33m, enacs@, initc@,
21683 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
21684 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
21685 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21686 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
21687 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
21688 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
21689 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21692 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
21694 colors@, ncv@, pairs@,
21695 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21696 uvvwwxxyyzz{{||}}~~,
21697 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
21698 enacs=\E)0, initc@,
21699 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
21700 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
21701 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
21703 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
21705 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
21706 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
21707 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
21708 \E]PFFFFFFF\E[;37m,
21711 # From: Alexandre Montaron, 27 May 2020
21712 linux-s|Linux console with added status line at bottom,
21714 clear=\E[255;255H\E[A\E[1J\E[H, csr@,
21715 dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
21716 iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s;
21717 \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1
21718 \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE
21719 S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"',
21720 rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux,
21722 # Screen entries counterpart :
21724 screen.linux-m1|Linux m1 specific for screen,
21726 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
21727 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
21728 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
21729 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
21730 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21731 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21732 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21733 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21734 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21735 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21736 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21737 \n\n\n\n\n\n\n\n\n\n,
21738 use=xterm+x11mouse, use=screen4,
21740 screen.linux-m1b|Linux m1b specific for screen,
21742 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
21744 screen.linux-m2|Linux m2 specific for screen,
21745 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21746 uvvwwxxyyzz{{||}}~~,
21747 use=screen.linux-m1b,
21751 putty-m1|Putty Minitel 1 "like" Couleurs,
21753 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21754 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21755 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21756 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21759 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
21761 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21762 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21763 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21764 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21767 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
21769 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
21771 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21772 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21773 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21774 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21777 putty+screen|PuTTY with screen resizing extensions (building-block),
21778 .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
21780 putty-screen|PuTTY with screen resizing extensions,
21781 WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty,
21783 screen.putty-m1|Putty m1 specific for screen,
21784 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
21786 screen.putty-m1b|Putty m1b specific for screen,
21788 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
21790 screen.putty-m2|Putty m2 specific for screen,
21791 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21792 uvvwwxxyyzz{{||}}~~,
21793 use=screen.putty-m1b,
21794 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
21797 # viewdata lacks a true cup capability,
21798 # so I achieved it with home and cud1/cuf1 sequences only !
21799 viewdata|Prestel/Viewdata terminals,
21802 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
21804 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
21805 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
21806 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
21807 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
21808 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
21809 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
21810 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
21812 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
21813 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
21815 viewdata-o|optimized version of Viewdata Prestel/Viewdata terminals,
21816 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
21817 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
21818 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
21819 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
21820 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
21821 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
21822 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
21823 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
21824 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
21825 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
21826 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
21827 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
21828 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
21829 .ll=^^^K, use=viewdata,
21831 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
21833 viewdata-rv|Prestel/Viewdata terminals with reverse capabilitie (as green),
21835 rmso=\EG, smso=\EB, use=viewdata-o,
21837 ######## OBSOLETE VDT TYPES
21839 # These terminals are *long* dead -- these entries are retained for
21840 # historical interest only.
21842 #### Amtek Business Machines
21845 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
21846 # but these caps were commented out in 8.3; also, removed overridden
21847 # ":do=^J:" -- esr)
21848 abm80|amtek business machines 80,
21851 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
21852 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
21853 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
21855 #### Bell Labs blit terminals
21857 # These were AT&T's official entries. The 5620 FAQ maintained by
21858 # David Breneman <daveb@dgtl.com> has this to say:
21860 # Actually, in the beginning was the Jerq, and the Jerq was white with a
21861 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
21862 # was good. But lo, upon the horizon loomed a mighty management-type person
21863 # (known now only by the initials VP) who said, the mighty Jerq must stay
21864 # alone, and could not go forth into the world. So Locanthi and Pike put the
21865 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
21866 # world. And the Jerq lived the rest of its days in research, but never
21867 # strayed from those paths.
21869 # In all seriousness, the Blit was originally known as the Jerq, but when
21870 # it started to be shown outside of the halls of the Bell Labs Research
21871 # organization, the management powers that be decided that the name could
21872 # not remain. So it was renamed to be Blit. This was in late 1981.
21874 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
21878 blit|jerq|blit running teletype rom,
21880 cols#87, it#8, lines#72,
21881 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21882 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
21883 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
21884 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
21885 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
21886 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
21888 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
21889 cbblit|fixterm|blit running columbus code,
21891 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
21892 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
21893 smul=\EU", use=blit,
21895 oblit|ojerq|first version of blit rom,
21896 am, da, db, eo, mir, ul, xon,
21897 cols#88, it#8, lines#72,
21898 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21899 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
21900 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
21901 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
21904 #### Bolt, Beranek & Newman (bbn)
21906 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
21907 # The parent company, best known as the architects of the Internet, is
21910 # Jeff DelPapa <dp@world.std.com> writes:
21911 # The bitgraph was a large white box that contained a monochrome bitmap
21912 # display, and a 68000 to run it. You could download code and run it on
21913 # the cpu, it had 128kb (I think) of memory. I used one in the late
21914 # 70's, sure beat a VT100. It had one strange feature tho -- it used
21915 # the cpu to bitblt pixels to scroll, it took longer than the refresh
21916 # rate, and looked like a rubber sheet stretching, then snapping
21917 # upwards. It had everything the early mac had, except a floppy drive a
21918 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
21919 # Beranek and Neuman) sold at most a few hundred of them to the real
21920 # world. DOD may have bought more...
21923 # Entries for the BitGraph terminals. The problem
21924 # with scrolling in vi can only be fixed by getting BBN to put
21925 # smarter scroll logic in the terminal or changing vi or padding
21926 # scrolls with about 500 ms delay.
21928 # I always thought the problem was related to the terminal
21929 # counting newlines in its input buffer before scrolling and
21930 # then moving the screen that much. Then vi comes along and
21931 # paints lines in on the bottom line of the screen, so you get
21932 # this big white gap.
21934 bitgraph|bg2.0nv|bg3.10nv|BBN BitGraph 2.0 or later (normal video),
21935 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21937 bg2.0rv|bg3.10rv|BBn BitGraph 2.0 (reverse video),
21938 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21940 bg2.0|bg3.10|BBN BitGraph 2.0 or later (no init),
21943 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
21944 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
21945 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
21946 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
21947 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21948 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
21949 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
21950 sgr0=\E[m, smkx=\E=, smso=\E[7m,
21952 bg1.25rv|BBN BitGraph 1.25 (reverse video),
21953 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21955 bg1.25nv|BBN BitGraph 1.25 (normal video),
21956 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21958 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
21959 bg1.25|BBN BitGraph 1.25,
21961 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
21962 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
21963 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
21964 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
21965 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
21966 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
21967 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
21970 #### Bull (bq, dku, vip)
21972 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
21974 #============================================#
21975 # BULL QUESTAR 210 `SDP' terminals emulation #
21976 #============================================#
21978 # Description written by R.K.Saunders (Bull Transac)
21980 # Modifications written by F. Girard (Bull MTS)
21981 # 19-05-87 V02.00.01
21982 # 17-12-87 V02.00.02
21983 # 15-09-89 V02.00.05
21985 # Typical technical selections F1 (modes SDP/ROLL):
21986 # -------------------------------------------------------
21987 # | 01 02 03 04 05 06 07 08 09 10 |
21988 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
21990 # | 11 12 13 14 15 16 17 18 19 20 |
21991 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
21993 # | 21 22 23 24 25 26 27 28 29 30 |
21994 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
21996 # | 31 32 33 34 35 36 37 38 39 40 |
21997 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
21998 # -------------------------------------------------------
21999 # Typical firmware identification F5 "etat 6":
22000 # P287.02.04b (AZERTY)
22001 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
22002 # P298.03.03 (monochrome) or P374.03.02 (colour)
22004 # SM SDP mode (VIP command): ^[[?=h
22005 # RIS (erases screen): ^[c
22006 # DMI disable keyboard: ^[`
22007 # SM double rendition mode: ^[[?>h
22008 # RM solicited status mode: ^[[5l
22009 # RM character mode: ^[[>l
22010 # RM echoplex mode: ^[[12l
22011 # RM column tab mode: ^[[18l
22012 # RM forbid SS2 keyboard mode: ^[[?<l
22013 # SM scroll mode: ^[[=h
22014 # FCF enable XON/XOFF: ^[P1s^[\
22015 # MTL select end msg character: ^[[^Wp
22016 # EMI enable keyboard: ^[b
22017 # RIS retour etat initial: ^[c
22018 # enable FC keypad: ^[[?<h,
22019 # MPW map status line window: ^[PY99:98^[\
22020 # SCP select status line: ^[[0;98v
22021 # ED erase entire partition: ^[[2J
22022 # SCP select main partition: ^[[v
22023 # SM character insertion mode: ^[[4h
22024 # RM character replacement mode: ^[[4l
22025 # COO cursor on: ^[[r
22026 # COO cursor off: ^[[1r
22027 # SGR dim (turquoise) rev attr: ^[[2;7m
22028 # SGR Data normal attr: ^[[m
22029 # SO Line-graphic mode ON: ^N
22030 # SI Line-graphic mode OFF: ^O
22031 # MC start routing to printer: ^[[5i
22032 # MC stop routing to printer: ^M^[[4i
22035 # This entry covers the following terminals:
22036 # dku7102, tws2102, and tws models 2105 to 2112
22037 tws-generic|dku7102|Bull Questar tws terminals,
22038 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
22039 cols#80, it#8, lines#24, wsl#80,
22040 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
22041 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
22042 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
22043 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
22044 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22045 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
22046 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
22047 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
22048 il1=\E[L, ind=\n, invis=\E[0;8m,
22049 is1=\E[?=h\Ec\E`\E[?>h\EPY99:98\E\\,
22050 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
22051 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
22052 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
22053 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
22054 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
22055 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
22056 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
22057 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
22058 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
22059 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
22060 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
22061 %p7%t;8%;m%?%p9%t\016%e\017%;,
22062 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\,
22063 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
22064 tsl=\EPY99:98\E\\\E[0;98v\E[2;7m,
22065 tws2102-sna|dku7102-sna|Bull Questar tws2102 for SNA,
22066 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
22068 tws2103|xdku|Bull Questar tws2103,
22069 ht=^I, use=tws-generic,
22070 tws2103-sna|dku7103-sna|Bull Questar tws2103 for SNA,
22071 ht=^I, use=tws2102-sna,
22072 dku7102-old|Bull Questar 200 DKU7102 (microcode version < 6),
22073 clear=\E[2J\E[H, cup@, dl@, dl1@,
22074 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
22075 il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m,
22077 dku7202|Bull Questar 200 DKU7202 (colour/character attributes),
22078 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
22079 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
22080 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
22081 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
22083 #=========================================================#
22084 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
22085 #=========================================================#
22087 # Description written by J. Staerck (BULL SA)
22088 # Copyright (c) 1989 BULL SA
22089 #---------------------------------------------------------------------------
22090 # This entry is used for terminals with VT320 emulation mode
22091 # and following set-up :
22092 # 8 bit ISO Latin Character Set (ISO 8859-1),
22093 # 7 bit Control Characters,
22094 # 80 columns screen.
22095 # Hereafter are some DEC vt terminals' commands. (valid on VT200 and 300)
22096 # They are used in string capabilities with VT220-320 emulation mode.
22097 # In the following DEC definitions, two kinds of terminfo databases are
22099 # 1. the first with Command Sequence Introducer starting with escape
22100 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
22101 # 2. the second with Command Sequence Introducer starting with escape
22102 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
22103 # Soft Terminal Reset esc [ ! p
22104 # RIS (erases screen): esc c
22105 # DECKPNM numeric keypad mode: esc >
22106 # DECKPAM applic. keypad mode: esc =
22107 # DECSTBM Scrolling region: esc [ r
22108 # SCS select G0 = US: esc ( B
22109 # SCS select G1 = line-graphic: esc ) 0
22110 # Select 7-bit C1 controls: esc sp F
22111 # Select 8-bit C1 controls: esc sp G
22112 # Select cursor home: esc [ H
22113 # Select erase screen: esc [ J
22114 # SM KAM lock keyboard: esc [ 2 h
22115 # RM KAM unlock keyboard: esc [ 2 l
22116 # SM SRM local echo off: esc [ 1 2 h
22117 # RM SRM local echo on: esc [ 1 2 l
22118 # SM LNM New line : esc [ 2 0 h
22119 # RM LNM return = CR only: esc [ 2 0 l
22120 # SM DECCKM cursor keys mode: esc [ ? 1 h
22121 # RM DECCKM appli. keys mode: esc [ ? 1 l
22122 # SM DECANM ANSI mode on: esc [ ? 2 h
22123 # RM DECANM ANSI mode off: esc [ ? 2 l
22124 # SM DECCOLM 132-column screen: esc [ ? 3 h
22125 # RM DECCOLM 80-column screen: esc [ ? 3 l
22126 # SM DECSCLM Smooth scroll: esc [ ? 4 h
22127 # RM DECSCLM Jump scroll: esc [ ? 4 l
22128 # SM DECSCNM screen light backgr. esc [ ? 5 h
22129 # RM DECSCNM screen dark backgr. esc [ ? 5 l
22130 # SM DECOM move within margins: esc [ ? 6 h
22131 # RM DECOM move outside margins: esc [ ? 6 l
22132 # SM DECAWM auto right margin: esc [ ? 7 h
22133 # RM DECAWM auto right margin: esc [ ? 7 l
22134 # SM DECARM auto repeat: esc [ ? 8 h
22135 # RM DECARM auto repeat: esc [ ? 8 l
22136 # DECSASD Select active main: esc [ 0 $ }
22137 # DECSASD Select active status: esc [ 1 $ }
22138 # DECSSDT Select status none: esc [ 0 $ ~
22139 # DECSSDT Select status indic.: esc [ 1 $ ~
22140 # DECSSDT Select status host-wr: esc [ 2 $ ~
22141 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
22142 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
22143 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
22144 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
22145 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
22146 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
22147 # SM DECKBUM clavier informatique esc [ ? 6 8 h
22148 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
22149 # DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 " p
22150 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
22151 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
22152 # DECSCL VT300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
22153 # Char. and Line attributes: esc [ Ps ... Ps m
22154 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
22155 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
22158 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
22159 bq300|Bull VT320 ISO Latin 1 80 columns terminal,
22160 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
22161 cols#80, it#8, lines#24, vt#3, wsl#80,
22162 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22163 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22164 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
22165 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
22166 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22167 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
22168 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
22169 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
22170 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
22171 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
22172 is1=\E[63;1"p\E[2h,
22173 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22175 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
22176 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
22177 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
22178 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
22179 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
22180 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
22181 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
22182 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
22183 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
22184 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
22185 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
22187 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
22188 %;m%?%p9%t\E(0%e\E(B%;,
22189 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
22190 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
22191 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
22192 use=vt220+vtedit, use=ansi+pp, use=vt220+cvis,
22193 bq300-rv|Bull VT320 reverse 80 columns,
22194 flash=\E[?5l$<50>\E[?5h,
22195 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22198 bq300-w|Bull VT320 132 columns,
22200 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22202 rs2=\E[?3h, use=bq300,
22203 bq300-w-rv|Bull VT320 reverse mode 132 columns,
22205 flash=\E[?5l$<50>\E[?5h,
22206 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22208 rs2=\E[?3h, use=bq300,
22210 # This entry is used for terminals with VT320 emulation mode
22211 # and following set-up :
22212 # 8 bit ISO Latin Character Set (ISO 8859-1),
22213 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
22214 # 80 columns screen.
22215 # Soft Terminal Reset csi ! p
22216 # RIS (erases screen): esc c
22217 # DECKPNM numeric keypad mode: esc >
22218 # DECKPAM applic. keypad mode: esc =
22219 # DECSTBM Scrolling region: esc [ r
22220 # SCS select G0 = US: esc ( B
22221 # SCS select G1 = line-graphic: esc ) 0
22222 # Select 7-bit C1 controls: esc sp F
22223 # Select 8-bit C1 controls: esc sp G
22224 # Select cursor home: csi H
22225 # Select erase screen: csi J
22226 # SM KAM lock keyboard: csi 2 h
22227 # RM KAM unlock keyboard: csi 2 l
22228 # SM SRM local echo off: csi 1 2 h
22229 # RM SRM local echo on: csi 1 2 l
22230 # SM LNM New line : csi 2 0 h
22231 # RM LNM return = CR only: csi 2 0 l
22232 # SM DECCKM cursor keys mode: csi ? 1 h
22233 # RM DECCKM appli. keys mode: csi ? 1 l
22234 # SM DECANM ANSI mode on: csi ? 2 h
22235 # RM DECANM ANSI mode off: csi ? 2 l
22236 # SM DECCOLM 132-column screen: csi ? 3 h
22237 # RM DECCOLM 80-column screen: csi ? 3 l
22238 # SM DECSCLM Smooth scroll: csi ? 4 h
22239 # RM DECSCLM Jump scroll: csi ? 4 l
22240 # SM DECSCNM screen light backgr. csi ? 5 h
22241 # RM DECSCNM screen dark backgr. csi ? 5 l
22242 # SM DECOM move within margins: csi ? 6 h
22243 # RM DECOM move outside margins: csi ? 6 l
22244 # SM DECAWM auto right margin: csi ? 7 h
22245 # RM DECAWM auto right margin: csi ? 7 l
22246 # SM DECARM auto repeat: csi ? 8 h
22247 # RM DECARM auto repeat: csi ? 8 l
22248 # DECSASD Select active main: csi 0 $ }
22249 # DECSASD Select active status: csi 1 $ }
22250 # DECSSDT Select status none: csi 0 $ ~
22251 # DECSSDT Select status indic.: csi 1 $ ~
22252 # DECSSDT Select status host-wr: csi 2 $ ~
22253 # SM DECTCEM Visible cursor: csi ? 2 5 h
22254 # RM DECTCEM Invisible cursor: csi ? 2 5 l
22255 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
22256 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
22257 # DECSCL VT300 mode 8-bit ctrl: csi 6 3 " p
22258 # or DECSCL VT300 mode 8-bit ctrl: csi 6 3 ; 0 " p
22259 # DECSCL VT300 mode 7-bit ctrl: csi 6 3 ; 1 " p
22260 # Char. and Line attributes: csi Ps ... Ps m
22261 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
22262 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
22263 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
22264 bq300-8|Bull VT320 full 8 bits 80 columns,
22265 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
22266 cols#80, it#8, lines#24, vt#3, wsl#80,
22267 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22268 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
22269 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
22270 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
22271 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
22272 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
22273 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
22274 el=\233K, el1=\2331K, enacs=\E(B\E)0,
22275 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
22276 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
22277 ind=\ED, is1=\E[63;2"p\E[2h,
22278 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22280 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
22281 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
22282 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
22283 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
22284 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
22285 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
22286 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
22287 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
22288 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
22289 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
22290 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
22291 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
22292 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
22293 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
22294 s0ds=\E(B, s1ds=\E(0, sc=\E7,
22295 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22296 1%;m%?%p9%t\E(0%e\E(B%;,
22297 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
22298 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
22299 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
22301 bq300-8rv|Bull VT320 8-bit reverse mode 80 columns,
22302 flash=\233?5l$<50>\233?5h,
22303 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22306 bq300-8w|Bull VT320 8-bit 132 columns,
22308 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22310 rs2=\233?3h, use=bq300-8,
22311 bq300-w-8rv|Bull VT320 8-bit reverse mode 132 columns,
22313 flash=\233?5l$<50>\233?5h,
22314 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22316 rs2=\233?3h, use=bq300-8,
22318 # This entry is used for terminals with VT320 emulation mode
22319 # a 102 keys keyboard (PC scancode !) and following set-up :
22320 # 8 bit ISO Latin Character Set (ISO 8859-1),
22321 # 7 bit Control Characters,
22322 # 80 columns screen.
22323 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
22324 kbs=^H, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~,
22325 kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@,
22326 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~,
22327 kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, krdo@, kslt@, lf1@, lf2@,
22328 lf3@, lf4@, use=vt220+pcedit, use=bq300,
22329 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
22330 flash=\E[?5l$<50>\E[?5h,
22331 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22334 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
22336 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22338 rs2=\E[?3h, use=bq300-pc,
22339 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
22341 flash=\E[?5l$<50>\E[?5h,
22342 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22344 rs2=\E[?3h, use=bq300-pc,
22345 # 8 bit ISO Latin Character Set (ISO 8859-1),
22346 # 8 bit Control Characters,
22347 # 80 columns screen.
22348 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
22349 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
22350 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
22351 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
22352 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22353 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
22354 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
22355 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
22356 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
22357 flash=\E[?5l$<50>\E[?5h,
22358 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22361 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
22363 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22365 rs2=\E[?3h, use=bq300-8-pc,
22366 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
22368 flash=\E[?5l$<50>\E[?5h,
22369 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22371 rs2=\E[?3h, use=bq300-8-pc,
22373 #======================================================#
22374 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
22375 #======================================================#
22377 # normal mode, 8 bits, 80 columns terminal.
22378 # BLD bell disable ^[g
22379 # BLE bell enable ^[h
22380 # CAMR char. attr. mode reset ^[[G
22381 # CAMS char. attr. mode set ^[[D
22383 # CM character mode (async.) ^[k
22384 # EP echoplex mode (by host) ^[m
22385 # IM insert mode set ^[[I
22386 # IMR insert mode reset ^[[J
22387 # KBL keyboard lock (reset) ^[[X
22388 # KBU keyboard unlock (set) ^[[W
22389 # LGR Line-graphic mode reset ^[F
22390 # LGS Line-graphic mode set ^[G
22391 # NEP non echoplex mode (by host) ^[l
22392 # PDS print data space ^[[0p
22393 # PDT print data terminator ^[[<p
22394 # PHD print host data ^[[3p
22395 # PRES print adapter reset ^[[2p
22396 # RBM block mode reset ^[[E
22398 # RIS reset initial state: ^[c
22399 # RMR roll mode reset ^[q
22400 # RMS roll mode set ^[r
22401 # SCD scroll down (72 lines) ^[[1s
22402 # SCU scroll up (72 lines) ^[[0s
22403 # SLL status line lock ^[O
22404 # SLR status line reset ^[v
22405 # SLS status line set ^[w
22406 # SM78 set mode vip7800 ^[[1q
22407 # SSP0 partition 0 set ^[[00u
22408 # SSP1 partition n format 1 ^[[PnPnSTRINGu
22409 # SSP2 partition n format 2 ^[[PnPnSTRINGu
22410 # SSP3 partition n format 3 ^[[PnPnu
22411 # SSPR multi-part. reset ^[[<>u
22412 # TBC tab clear (at cursor pos.) ^[[g
22413 # TBI tab initialize ^[[N
22414 # TBS tab set (at cursor pos.) ^[p
22416 # ATR attribute (visual)
22419 # hide (blank) : ^[sH
22420 # inverse video : ^[sI
22425 # This covers the vip7800 and BQ3155-vip7800
22426 vip|Bull Questar 3155-7800,
22427 am, eslok, hs, km, mc5i, msgr, xenl, xon,
22428 cols#80, it#8, lines#24, vt#3, wsl#80,
22429 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
22430 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22431 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
22432 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
22433 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
22434 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
22435 is2=\E[00u\E[<>001001024080024080u\E[01u,
22436 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
22437 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
22438 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
22439 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
22440 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
22441 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
22442 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
22443 kf4=\E8, kf5=\E:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
22444 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
22445 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
22446 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
22447 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
22448 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
22449 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
22450 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
22451 smul=\Es_, tbc=\E[N, tsl=\Ew,
22452 # normal screen, 8 bits, 132 columns terminal.
22453 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
22455 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
22456 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
22458 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
22459 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
22460 cols#132, lines#72, wsl#132,
22461 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
22466 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
22467 # that is smaller than the screen, and puts up a warning message
22468 # outside the window. Te erases the warning message, puts the
22469 # window back to be the whole screen, and puts the cursor at just
22470 # below the small window. I defined <cnorm> and <civis> to really turn
22471 # the cursor on and off, but I have taken this out since I don't
22472 # like the cursor being turned off when vi exits.
22473 cg7900|chromatics|chromatics 7900,
22476 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
22477 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
22478 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
22479 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
22481 rmso=\001C1\,\001c2\,,
22482 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
22483 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
22484 \001W0\,0\,79\,39\,,
22485 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
22487 #### Computer Automation
22490 ca22851|Computer Automation 22851,
22493 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
22494 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
22495 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
22500 # This entry has correct padding and the undocumented "ri" capability
22501 cyb83|xl83|Cybernex xl-83,
22504 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
22505 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
22506 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
22507 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
22508 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
22509 cyb110|mdl110|Cybernex mdl-110,
22512 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
22513 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
22514 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
22515 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
22516 ht=\011$<43>, ich1=\016A\035$<3.5>,
22517 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
22521 # Datapoint is gone. They used to be headquartered in Texas.
22522 # They created ARCnet, an Ethernet competitor that flourished for a while
22523 # in the early 1980s before 3COM got wise and cut its prices. The service
22524 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
22527 dp3360|datapoint|Datapoint 3360,
22530 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
22531 ed=^_, el=^^, home=^], ind=\n,
22533 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
22534 # The Datapoint 8242 Workstation was sold at least between 1985
22535 # and 1989. To make the terminal work with this entry, press
22536 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
22537 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
22538 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
22539 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
22540 # fact unusable because the strings sent by the terminal conflict
22541 # with other keys).
22542 # The terminal is capable of displaying "box draw" characters.
22543 # For each graphic character you must send 2 ESC's (\E\E) followed
22544 # by a control character as follows:
22545 # character meaning
22546 # ========= =======
22549 # ctrl-G bottom tee
22552 # ctrl-J top left corner
22553 # ctrl-K top right corner
22554 # ctrl-L bottom left corner
22555 # ctrl-M bottom right corner
22556 # ctrl-N horizontal line
22557 # ctrl-O vertical line
22558 # Unfortunately this cannot be fitted into the termcap/terminfo
22559 # description scheme.
22560 dp8242|Datapoint 8242,
22563 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
22564 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
22565 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
22566 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22567 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
22568 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
22569 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
22570 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
22571 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22572 smso=\E^E, smul=\E^F,
22573 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
22576 #### DEC terminals (Obsolete types: DECwriter and VT40/42/50)
22578 # These entries came from DEC's official terminfos for its older terminals
22579 # (which happen to be identical to the AT&T/SCO terminal descriptions),
22580 # Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support Engineering
22581 # may have had more information. Updated terminfos and termcaps were available
22582 # at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
22584 # DEC's terminfos did not describe the auxiliary keypad.
22586 # DECScope of course had no "function keys", but this building block assigns
22587 # the three blank keys at the top of the auxiliary (numeric) keypad, using
22588 # the same analogy as VT100 (also lacking function-keys).
22590 # These assignments use the same layout for 0-9 as VT100+keypad; the VT52
22591 # keypad had its cursor-keys on the right-column as shown -TD
22592 # _______________________________________
22593 # | PF1 | PF2 | PF3 | c-up |
22594 # | \EP | \EQ | \ER | \EA |
22595 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_|
22597 # | \E?w | \E?x | \E?y | \EB |
22598 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____|
22599 # | 4 | 5 | 6 | c-right |
22600 # | \E?t | \E?u | \E?v | \EC |
22601 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_|
22602 # | 1 | 2 | 3 | c-left |
22603 # | \E?q | \E?r | \E?s | \ED |
22604 # |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____|
22605 # | 0 | . | enter |
22606 # | \E?p | \E?n | \E?M |
22607 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
22609 vt52+keypad|DECScope auxiliary keypad,
22610 ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y,
22611 kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
22612 kf8=\E?w, kf9=\E?x,
22617 bel=^G, cr=\r, cub1=^H, cud1=\n,
22621 bel=^G, cr=\r, cub1=^H, cud1=\n,
22626 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22627 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
22629 cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22630 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ],
22631 use=vt52+keypad, use=vt50,
22633 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
22634 vt61|vt-61|vt61.5|DEC VT61,
22636 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
22637 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
22638 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
22639 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
22642 # The gigi does standout with red!
22643 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
22644 gigi|vk100|DEC gigi graphics terminal,
22647 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
22648 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
22649 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
22650 el=\E[K, ht=^I, ind=\n,
22651 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
22652 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
22653 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
22654 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22655 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
22658 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
22659 # a PC differentiated from the IBM clones. It was a total, ludicrous,
22660 # grossly-overpriced failure (among other things, DEC's OS didn't include
22661 # a format program, so you had to buy pre-formatted floppies from DEC at
22662 # a hefty premium!).
22663 pro350|decpro|DEC pro console,
22665 cols#80, it#8, lines#24,
22666 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22667 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
22668 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
22669 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22670 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
22671 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
22672 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
22677 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
22678 dw2|decwriter|dw|DECwriter II,
22681 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
22682 # \E(B Use U.S. character set (otherwise # => british pound !)
22683 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
22684 # \E[w 10 char/in pitch
22685 # \E[1;132 full width horizontal margins
22686 # \E[2g clear all tab stops
22688 # \E[66t 66 lines/page (for \f)
22689 # \E[1;66r full vertical page can be printed
22690 # \E[4g clear vertical tab stops
22691 # \E> disable alternate keypad mode (so it transmits numbers!)
22692 # \E[%i%p1%du set tab stop at column %d (origin == 1)
22693 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
22696 # The dw3 does standout with wide characters.
22698 dw3|la120|DECwriter III,
22701 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
22702 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
22703 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
22705 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
22709 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
22710 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
22712 # These aren't official
22713 ln03|DEC ln03 laser printer,
22716 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
22717 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
22719 ln03-w|DEC ln03 laser printer 132 cols,
22721 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
22722 kcud1=\n, nel=\r\n, use=ln03,
22724 #### Delta Data (dd)
22727 # Untested. The cup sequence is hairy enough that it probably needs work.
22728 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
22729 # There are BSD-derived termcap entries floating around for this puppy
22730 # that are *certainly* wrong.
22731 delta|dd5000|delta data 5000,
22734 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
22735 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
22737 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
22739 #### Digital Data Research (ddr)
22742 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
22743 ddr|rebus3180|ddr3180|Rebus/DDR 3180 VT100 emulator,
22745 cols#80, it#8, lines#24, vt#3,
22746 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22747 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
22748 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
22749 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
22750 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
22751 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
22752 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
22753 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
22754 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
22755 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
22756 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
22759 #### Evans & Sutherland
22762 # Jon Leech <leech@cs.unc.edu> tells us:
22763 # The ps300 was the Evans & Sutherland Picture System 300, a high
22764 # performance 3D vector graphics system with a bunch of specialized hardware.
22765 # Approximate date of release was 1982 (early 80s, anyway), and it had several
22766 # evolutions including (limited) color versions such as the PS330C. PS300s
22767 # were effectively obsolete by the late 80s, replaced by raster graphics
22768 # systems, although specialized applications like molecular modeling
22769 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
22770 # are out of production, though of course E&S is very much alive (in 1996).
22771 # (ps300: changed ":pt@:" to "it@" -- esr)
22773 ps300|Picture System 300,
22776 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
22778 #### General Electric (ge)
22781 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
22784 bel=^G, cr=\r, cud1=\n, ind=\n,
22786 #### Heathkit/Zenith
22789 # Here is a description of the H19 DIP switches:
22792 # 0-3 = baud rate as follows:
22797 # 0 1 0 1 1200 baud
22798 # 1 0 0 0 2400 baud
22799 # 1 0 1 0 4800 baud
22800 # 1 1 0 0 9600 baud
22801 # 1 1 0 1 19.2K baud
22803 # 4 = parity (0 = no parity)
22804 # 5 = even parity (0 = odd parity)
22805 # 6 = stick parity (0 = normal parity)
22806 # 7 = full duplex (0 = half duplex)
22809 # 0 = block cursor (0 = underscore cursor)
22810 # 1 = no key click (0 = keyclick)
22811 # 2 = wrap at end of line (0 = no wrap)
22812 # 3 = auto LF on CR (0 = no LF on CR)
22813 # 4 = auto CR on LF (0 = no CR on LF)
22814 # 5 = ANSI mode (0 = VT52 mode)
22815 # 6 = keypad shifted (0 = keypad unshifted)
22816 # 7 = 50Hz refresh (1 = 60Hz refresh)
22818 # Factory Default settings are as follows:
22820 # S401 1 0 0 0 1 1 0 0
22821 # S402 0 0 0 0 0 0 0 0
22822 # (h19: I added <rmam>/<smam> based on the init string;
22823 # also added empty <acsc> to suppress a tic warning -- esr)
22824 h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ANSI mode,
22825 OTbs, am, mir, msgr,
22826 cols#80, it#8, lines#24,
22827 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
22828 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
22829 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
22830 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
22831 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
22832 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
22833 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
22834 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
22835 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
22836 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
22837 h19-bs|Heathkit w/keypad shifted,
22838 rmkx=\Eu, smkx=\Et, use=h19-b,
22839 h19-us|h19us|h19-smul|Heathkit w/keypad shifted/underscore cursor,
22840 rmkx=\Eu, smkx=\Et, use=h19-u,
22841 # (h19: merged in <ip> from BSDI hp19-e entry>;
22842 # also added empty <acsc> to suppress a tic warning --esr)
22843 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
22844 # Tim tells us that:
22845 # I have an old Zenith-19 terminal at home that still gets a lot of use.
22846 # This terminal suffers from the same famous insert-mode padding lossage
22847 # that has been acknowledged for the Z29 terminal. Emacs is nearly
22848 # unusable on this box, since even a half-scroll up or down the window
22849 # causes flaming terminal death.
22851 # On the Z19, the only way I have found around this problem is to remove
22852 # the :al: and :dl: entries entirely. No amount of extra padding will
22853 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
22854 # makes Emacs a little slower, but it remains in the land of the living.
22856 h19|heath|h19-b|heathkit|heath-19|z19|zenith|Heathkit h19,
22857 OTbs, am, eslok, hs, mir, msgr,
22858 cols#80, it#8, lines#24,
22859 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
22860 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22861 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
22862 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
22863 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22864 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
22865 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
22866 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
22867 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
22868 h19-u|Heathkit with underscore cursor,
22869 cnorm@, cvvis@, use=h19-b,
22870 h19-g|h19g|Heathkit w/block cursor,
22871 cnorm=\Ex4, cvvis@, use=h19-b,
22872 alto-h19|altoh19|altoheath|alto-heath|alto emulating Heathkit h19,
22874 dl1=\EM, il1=\EL, use=h19,
22876 # The major problem with the Z29 is that it requires more padding than the Z19.
22878 # The problem with declaring an H19 to be synonymous with a Z29 is that
22879 # it needs more padding. It especially loses if a program attempts
22880 # to put the Z29 into insert mode and insert text at 9600 baud. It
22881 # even loses worse if the program attempts to insert tabs at 9600
22882 # baud. Adding padding to text that is inserted loses because in
22883 # order to make the Z29 not die, one must add so much padding that
22884 # whenever the program tries to use insert mode, the effective
22885 # rate is about 110 baud.
22887 # What program would want to put the terminal into insert mode
22888 # and shove stuff at it at 9600 baud you ask?
22890 # Emacs. Emacs seems to want to do the mathematically optimal
22891 # thing in doing a redisplay rather than the practical thing.
22892 # When it is about to output a line on top of a line that is
22893 # already on the screen, instead of just killing to the end of
22894 # the line and outputting the new line, it compares the old line
22895 # and the new line and if there are any similarities, it
22896 # constructs the new line by deleting the text on the old line
22897 # on the terminal that is already there and then inserting new
22898 # text into the line to transform it into the new line that is
22899 # to be displayed. The Z29 does not react kindly to this.
22901 # But don't cry for too long.... There is a solution. You can make
22902 # a termcap entry for the Z29 that says the Z29 has no insert mode.
22903 # Then Emacs cannot use it. "Oh, no, but now inserting into a
22904 # line will be really slow", you say. Well there is a sort of a
22905 # solution to that too. There is an insert character option on
22906 # the Z29 that will insert one character. Unfortunately, it
22907 # involves putting the terminal into ANSI mode, inserting the
22908 # character, and changing it back to H19 mode. All this takes 12
22909 # characters. Pretty expensive to insert one character, but it
22910 # works. Either Emacs doesn't try to use its inserting hack when
22911 # it's only given an insert character ability or the Z29 doesn't
22912 # require padding with this (the former is probably more likely,
22913 # but I haven't checked it out).
22914 # (z29: added empty <acsc> to suppress a tic warning, merged in
22915 # status line capabilities from BRL entry --esr)
22916 z29|zenith29|z29b|Zenith z29b,
22917 OTbs, OTpt, am, eslok, hs, mir, msgr,
22918 OTkn#10, cols#80, lines#24,
22919 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
22920 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22921 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
22922 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
22923 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
22924 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
22925 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22926 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
22927 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
22928 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
22929 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
22930 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
22931 # z29 in ANSI mode. Assumes that the cursor is in the correct state, and that
22932 # the world is stable. <rs1> causes the terminal to be reset to the state
22933 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
22934 # cursor, bc -> block cursor.
22935 # From: Mike Meyers
22936 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
22937 # looks VT100-compatible -- esr)
22938 z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ANSI mode,
22939 OTbs, OTpt, am, eslok, hs, mir, msgr,
22940 OTkn#10, cols#80, it#8, lines#24,
22941 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
22942 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22943 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
22944 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22945 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22946 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
22947 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
22948 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
22949 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
22950 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
22951 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
22952 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
22953 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
22954 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
22956 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
22957 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
22958 z29a-kc-uc|h29a-kc-uc|Zenith z29 ANSI mode with keyclick and underscore cursor,
22959 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
22962 z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ANSI mode with block cursor and no keyclick,
22963 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
22966 z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ANSI mode with underscore cursor and no keyclick,
22967 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
22970 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
22971 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
22972 am, eslok, hs, mc5i, mir, msgr, xon,
22974 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
22975 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
22976 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
22977 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22978 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
22979 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22980 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22981 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
22982 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
22983 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
22984 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
22985 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
22986 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
22987 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
22988 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
22989 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
22990 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
22991 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22992 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
22994 # From: Brad Brahms <Brahms@USC-ECLC>
22995 z100|h100|z110|z-100|h-100|Heath/Zenith z-100 pc with color monitor,
22996 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
22997 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
22998 z100bw|h100bw|z110bw|z-100bw|h-100bw|Heath/Zenith z-100 pc,
22999 OTbs, OTpt, mir, msgr,
23000 OTkn#10, cols#80, it#8, lines#24,
23001 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
23002 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
23003 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
23004 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
23005 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
23006 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
23007 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
23008 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
23009 smir=\E@, smso=\Ep,
23010 p19|h19-b with il1/dl1,
23011 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
23012 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
23013 # (ztx: removed duplicate :sr: -- esr)
23014 ztx|ztx11|zt-1|htx11|ztx-1-a|Heath/Zenith ztx-10 or 11,
23015 OTbs, am, eslok, hs,
23016 cols#80, it#8, lines#24,
23017 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
23018 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
23019 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
23020 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
23021 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
23022 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
23023 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
23024 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
23026 #### IMS International (ims)
23028 # There was a company called IMS International located in Carson City,
23029 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
23030 # bus/Z80 hardware and a line of terminals called Ultimas.
23033 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
23034 ims950-b|bare ims950 no init string,
23036 # (ims950: removed obsolete ":ko@:" -- esr)
23037 ims950|IMS TeleVideo 950 emulation,
23039 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
23040 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
23041 # (ims950-rv: removed obsolete ":ko@:" -- esr)
23042 ims950-rv|IMS tvi950 rev video,
23044 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
23045 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
23046 ims-ansi|ultima2|ultimaII|IMS Ultima II,
23048 cols#80, it#8, lines#24,
23049 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
23050 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
23051 ht=^I, if=/usr/share/tabset/vt100,
23052 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
23053 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
23054 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
23057 #### Intertec Data Systems
23059 # I think this company is long dead as of 1995. They made an early CP/M
23060 # micro called the "Intertec Superbrain" that was moderately popular,
23061 # then sank out of sight.
23064 superbrain|Intertec Superbrain,
23067 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
23068 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
23069 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
23070 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
23071 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
23072 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
23073 # and the reverse is actually true. Try it. -- esr)
23074 intertube|intertec|Intertec InterTube,
23077 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
23078 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
23079 ind=\n, rmso=\E0@, smso=\E0P,
23080 # The intertube 2 has the "full duplex" problem like the Tektronix 4025: if you
23081 # are typing and a command comes in, the keystrokes you type get interspersed
23082 # with the command and it messes up
23083 intertube2|Intertec data systems InterTube 2,
23085 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
23086 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
23087 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
23089 #### Ithaca Intersystems
23091 # This company made S100-bus personal computers long ago in the pre-IBM-PC
23092 # past. They used to be reachable at:
23094 # Ithaca Intersystems
23095 # 1650 Hanshaw Road
23096 # Ithaca, New York 14850
23098 # However, the outfit went bankrupt years ago.
23101 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
23102 # These entries were written (originally in termcap syntax) by Brian Yandell
23103 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
23104 # University of Wisconsin.
23106 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
23107 # removed <if=/usr/share/tabset/init.graphos> and
23108 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
23109 graphos|graphos III,
23111 cols#80, it#8, lines#24,
23112 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
23113 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
23114 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23115 cuu=\E[%p1%dA, cuu1=\E[A,
23116 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
23117 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
23118 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23119 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
23120 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
23121 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
23122 smir=\E[4h, smso=\E[7m,
23123 graphos-30|graphos III with 30 lines,
23125 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
23129 # These people used to be reachable at:
23132 # 1393 Main Street,
23133 # Waltham, MA 02154
23134 # Vox: (617)-890-5796.
23136 # However, if you call that number today you'll get an insurance company.
23137 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
23138 # 26 Feb 1997 that says:
23140 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
23141 # for ~7 years. Modgraph still in business. Products are rugged laptop and
23142 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
23143 # panel-mount etc). I can be emailed at sonfour@aol.com
23145 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
23146 # dated 1984. According to the manual, it featured Tek 4010/4014
23147 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
23150 modgraph|mod24|modgraph terminal emulating VT100,
23153 cvvis=\E\^9;0s\E\^7;1s,
23154 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
23155 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
23156 \E\^11;81s\E\^11;89s,
23157 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
23158 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
23159 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
23161 cols#80, it#8, lines#24,
23162 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
23163 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
23164 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
23165 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
23166 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
23167 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
23168 1s\E\^9;1s\E\^27;1,
23171 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
23172 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
23173 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
23174 # mark and using delete-to-killbuffer work correctly. However, we would
23175 # like normal mode of operation to be using a Modgraph with 48 line setting.
23176 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
23177 # the setting mark and delete-to-killbuffer results in the deletion of only
23178 # the line the mark is set on.
23179 # We've discovered that the delete-to-killbuffer works correctly
23180 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
23181 # the first line disappears but a ctrl-l shows that it did work
23183 modgraph48|mod|Modgraph w/48 lines,
23184 OTbs, OTpt, am, xenl,
23185 cols#80, it#8, lines#48, vt#3,
23186 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
23187 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
23188 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
23189 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
23190 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
23191 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
23192 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
23193 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
23194 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
23195 smso=\E[7m, smul=\E[4m,
23197 #### Morrow Designs
23199 # This was George Morrow's company. They started in the late 1970s making
23200 # S100-bus machines. They used to be reachable at:
23203 # 600 McCormick St.
23204 # San Leandro, CA 94577
23206 # but they're long gone now (1995).
23209 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
23210 # Jeff's specimen was dated June 1984.
23211 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
23212 mt70|mt-70|Morrow MD-70; native Morrow mode,
23213 am, mir, msgr, xon,
23214 cols#80, it#8, lines#24,
23215 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
23216 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
23217 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
23218 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
23219 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
23220 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
23221 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
23222 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
23223 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
23224 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
23225 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23226 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
23227 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
23228 smul=\EG1, tbc=\E0, use=adm+sgr,
23233 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
23235 ex155|Motorola Exorterm 155,
23237 OTkn#5, OTug#1, cols#80, lines#24,
23238 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
23239 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
23240 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
23241 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
23242 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
23246 # This company is still around in 1995, manufacturing point-of-sale systems.
23248 omron|Omron 8025AG,
23251 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
23252 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
23253 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
23257 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
23258 # were competition for things like the Tektronix 4025.
23261 # Ramtek 6221 from BRL, probably by Doug Gwyn
23262 # The following SET-UP modes are assumed for normal operation:
23263 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
23264 # NEWLINE_OFF 80_COLUMNS
23265 # Other SET-UP modes may be set for operator convenience or communication
23266 # requirements; I recommend
23267 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
23268 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
23269 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
23270 # Note that the Control-E key is useless on this brain-damaged terminal. No
23271 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
23272 rt6221|Ramtek 6221 80x24,
23273 OTbs, OTpt, msgr, xon,
23274 OTkn#4, cols#80, it#8, lines#24, vt#3,
23275 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
23276 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
23277 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
23278 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
23279 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
23280 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
23281 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23282 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
23283 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
23284 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
23285 rmso=\E[m, rmul=\E[m,
23286 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
23287 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
23289 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
23290 smul=\E[4m, tbc=\E[3g,
23291 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
23292 rt6221-w|Ramtek 6221 160x48,
23293 cols#160, lines#48,
23294 ll=\E[48;1H, use=rt6221,
23299 # RCA VP3301 or VP3501
23300 rca|RCA vp3301/vp3501,
23303 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23304 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
23310 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
23311 # The following SET-UP modes are assumed for normal operation:
23312 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
23313 # ONLINE ANSI CURSOR_VISIBLE
23314 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
23315 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
23316 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
23317 # For use with graphics software, all graphics modes should be set to factory
23318 # default. Other SET-UP modes may be set for operator convenience or
23319 # communication requirements. No delays are specified; use "stty ixon -ixany"
23320 # to enable DC3/DC1 flow control!
23321 # I commented out the scrolling capabilities since they are too slow.
23322 hirez100|Selanar HiREZ-100,
23323 OTbs, OTpt, mir, msgr, xon,
23324 OTkn#4, cols#80, it#8, lines#48, vt#3,
23325 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
23326 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
23327 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23328 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
23329 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23330 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
23331 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
23332 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
23333 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
23334 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
23335 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
23336 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
23337 9l\E[r\E[m\E(B\017\E)0\E>,
23338 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
23339 smul=\E[4m, tbc=\E[3g,
23340 hirez100-w|Selanar HiREZ-100 in 132-column mode,
23341 cols#132, use=hirez100,
23346 # From University of Wisconsin
23347 vsc|Signetics Vsc Video driver by RMC,
23349 cols#80, it#8, lines#26,
23350 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
23351 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
23352 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
23353 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
23357 # Alan Frisbie <frisbie@flying-disk.com> writes:
23359 # As you may recall, the Soroc logo consisted of their name,
23360 # with the letter "S" superimposed over an odd design. This
23361 # consisted of a circle with a slightly smaller 15 degree (approx.)
23362 # wedge with rounded corners inside it. The color was sort of
23363 # a metallic gold/yellow.
23365 # If I had been more of a beer drinker it might have been obvious
23366 # to me, but it took a clue from their service department to make
23367 # me exclaim, "Of course!" The circular object was the top of
23368 # a beer can (the old removable pop-top style) and "Soroc" was an
23369 # anagram for "Coors".
23371 # I can just imagine the founders of the company sitting around
23372 # one evening, tossing back a few and trying to decide what to
23373 # call their new company and what to use for a logo.
23376 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
23377 soroc120|iq120|soroc|Soroc iq120,
23378 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
23379 kcuf1=^L, kcuu1=^K, use=adm3a,
23380 soroc140|iq140|Soroc iq140,
23383 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23384 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
23385 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
23386 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
23387 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23388 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
23389 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
23391 #### Southwest Technical Products
23393 # These guys made an early personal micro called the M6800.
23394 # The ct82 was probably its console terminal.
23397 # (swtp: removed obsolete ":bc=^D:" -- esr)
23398 swtp|ct82|Southwest Technical Products ct82,
23401 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
23402 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
23403 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
23404 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
23405 \017\035\027\022\011,
23406 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
23410 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
23412 # Synertek used to make ICs, various 6502-based single-board process
23413 # control and hobbyist computers, and assorted peripherals including a
23414 # series of small inexpensive terminals (I think they were one of the
23415 # first to have a "terminal-on-a-keyboard", where the terminal itself
23416 # was only slightly larger than the keyboard).
23418 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
23419 # was a 40x24 terminal that could connect to a standard TV through a
23420 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
23421 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
23422 # I have a KTM-2/80 still in working order. The KTM-2s had fully
23423 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
23424 # ROM and 2 ROMs as character generators. They were incredibly simple,
23425 # and I've never had any problems with mine (witness the fact that mine
23426 # was made in 1981 and is still working great... I've blown the video
23427 # output transistor a couple of times, but it's a 2N2222 :-)
23429 # The KTM-3 (which is what is listed in the terminfo file) was their
23430 # attempt at putting a KTM-2 in a box (and some models came with a
23431 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
23432 # control and escape sequences are very different. The KTM-3 was always
23433 # real broken, at least according to the folks I've talked to about it.
23435 # The padding in the entry is probably off--these terminals were very
23436 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
23437 # anyone with any sanity replaced the ROMs with something that provided
23438 # a reasonable subset of VT100 functionality, since the usual ROMs were
23439 # obviously very primitive... oh, you could get an upgraded ROM from
23440 # Synertek for some incredible amount of money, but what hacker with an
23441 # EPROM burner would do that? :)
23443 # Sorry I don't have any contact info; I believe they were located in
23444 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
23445 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
23446 # business these days.
23449 # Tested, seems to work fine with vi.
23450 synertek|ktm|synertek380|Synertek KTM 3/80 tubeless terminal,
23453 clear=^Z, cub1=^H, cuf1=^L,
23454 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23456 #### Tab Office Products
23458 # TAB Products Co. - Palo Alto, California
23459 # Electronic Office Products,
23460 # 1451 California Avenue 94304
23462 # I think they're out of business.
23465 # The tab 132 uses xon/xoff, so no padding needed.
23466 # <smkx>/<rmkx> have nothing to do with arrow keys.
23467 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
23468 # Seems to be no way to get rid of status line.
23469 # The manual for this puppy was dated June 1981. It claims to be VT52-
23470 # compatible but looks more VT100-like.
23471 tab132|tab|tab132-15|tab 132/15,
23473 OTdN@, cols#80, lines#24, lm#96,
23474 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
23475 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
23476 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
23478 tab132-w|tab132 in wide mode,
23480 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
23481 tab132-rv|tab132 in reverse-video mode,
23482 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
23483 tab132-w-rv|tab132 in reverse-video/wide mode,
23484 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
23489 # Research Incorporated
23490 # 6425 Flying Cloud Drive
23491 # Eden Prairie, MN 55344
23492 # Vox: (612)-941-3300
23494 # The Teleray terminals were all discontinued in 1992-93. RI still services
23495 # and repairs these beasts, but no longer manufactures them. The Teleray
23496 # people believe that all the types listed below are very rare now (1995).
23497 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
23498 # Model 100) that were ANSI-compatible.
23500 # Note two things called "teleray". Reorder should move the common one
23501 # to the front if you have either. A dumb Teleray with the cursor stuck
23502 # on the bottom and no obvious model number is probably a 3700.
23505 t3700|dumb Teleray 3700,
23508 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
23509 t3800|Teleray 3800 series,
23511 cols#80, it#8, lines#24,
23512 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23513 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23514 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
23515 t1061|teleray|Teleray 1061,
23516 OTbs, am, km, xhp, xt,
23517 cols#80, it#8, lines#24, xmc#1,
23518 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23519 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23520 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
23521 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
23522 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
23523 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
23524 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
23525 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
23527 t1061f|Teleray 1061 with fast PROMs,
23528 dl1=\EM, il1=\EL, ip@, use=t1061,
23529 # "Teleray Arpa Special", officially designated as
23530 # "Teleray Arpa network model 10" with "Special feature 720".
23531 # This is the new (1981) fast microcode updating the older "arpa" proms
23532 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
23533 # converts the keypad to programmable function keys, and has other goodies.
23534 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
23535 # programs handle such lossage properly.
23536 # Note: this is NOT the old termcap's "t1061f with fast proms."
23537 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
23538 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
23539 t10|Teleray 10 special,
23541 cols#80, it#8, lines#24, xmc#2,
23542 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
23543 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23544 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
23545 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
23547 # Teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
23548 # back/forth words. Put the function keys (f1-f10) where they can be
23549 # found, and turn off the other magic keys along the top row, except
23550 # for line/local. Do the magic appropriate to make the page shifts work.
23551 # Also toggle ^S/^Q for those of us who use Emacs.
23553 am, da, db, mir, xhp, xt,
23555 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
23556 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
23557 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
23558 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
23559 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
23560 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
23561 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
23562 smso=\E[7m, smul=\E[4m,
23564 #### Texas Instruments (ti)
23567 # The Silent 700 was so called because it was built around a quiet thermal
23568 # printer. It was portable, equipped with an acoustic coupler, and pretty
23569 # neat for its day.
23570 ti700|ti733|ti735|ti745|ti800|Texas Instruments Silent 700/733/735/745 or OMNI 800,
23573 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
23575 # Terminal entries for the Texas Instruments 703/707
23576 # hardcopy terminals.
23578 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/
23580 # Model 707 Data Terminal User's Manual
23581 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/2310451-0001_Silent_700_Model_707_Users_Manual_Nov1983.pdf
23583 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
23584 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0
23585 # cpi using an escape sequence. There is no 80/132-column capability in
23586 # terminfo (only the more general cpi which allows any value).
23587 ti703|ti707|Texas Instruments Silent 703/707,
23590 cuf1=\s, is2=\EPC\\, nel=\r\n, use=ti700,
23591 ti703-w|ti707-w|Texas Instruments Silent 703/707 (132 column),
23593 is2=\EPD\\, use=ti703,
23596 # Texas Instruments 916 VDT 7 bit control mode
23598 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 VT220 mode 7 bit CTRL,
23600 cbt=\E[Z, clear=\E[H\E[2J$<6>, cub=\E[%p1%dD,
23601 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,
23602 cuu=\E[%p1%dA, dch=\E[%p1%dP$<250>, dch1=\E[P,
23603 dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
23604 el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
23605 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
23606 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
23607 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
23608 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
23609 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
23610 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
23611 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
23612 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
23615 # Texas Instruments 916 VDT 8 bit control mode
23617 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 VT220 mode bit CTRL,
23618 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
23619 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
23620 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
23621 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
23622 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
23623 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
23625 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
23627 ti916-132|Texas Instruments 916 VDT VT220 132 column,
23628 cols#132, use=ti916,
23630 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
23632 ti916-8-132|Texas Instruments 916 VDT 8-bit VT220 132 column,
23633 cols#132, use=ti916-8,
23634 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
23636 cols#80, it#8, lines#24,
23637 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23638 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23639 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23640 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23641 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23642 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
23643 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
23644 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
23645 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
23646 smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23647 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
23649 cols#80, it#8, lines#24,
23650 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23651 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23652 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23653 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23654 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23655 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
23656 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
23657 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
23658 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
23659 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23660 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
23661 cols#132, use=ti924,
23662 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
23663 cols#132, use=ti924-8,
23664 ti931|Texas Instruments 931 VDT,
23667 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
23668 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23669 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
23670 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
23671 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
23672 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
23673 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
23674 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
23675 sgr0=\E4@, smso=\E4A, smul=\E4D,
23676 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
23677 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
23678 # (ti926-8: I corrected this from the broken SCO entry -- esr)
23679 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
23680 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
23681 ti_ansi|basic entry for ti928,
23682 am, bce, eo, xenl, xon,
23683 colors#8, cols#80, it#8, lines#25, pairs#64,
23684 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
23685 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
23686 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
23687 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
23688 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23689 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
23690 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
23691 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
23692 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
23693 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
23694 smso=\E[7m, smul=\E[4m,
23696 # 928 VDT 7 bit control mode
23698 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
23699 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
23700 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
23701 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
23702 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
23703 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
23705 # 928 VDT 8 bit control mode
23707 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
23708 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
23709 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
23710 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
23711 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
23712 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
23713 kpp=\233T, kprt=\23335~, use=ti_ansi,
23718 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
23719 # had just <smso>=\EG6 which I think means standout was supposed to be
23720 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
23721 # <invis> might work-- esr)
23722 zen30|z30|Zentec 30,
23725 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23726 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
23727 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
23728 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
23729 smul@, use=adm+sgr,
23730 # (zen50: this had extension capabilities
23731 # :BS=^U:CL=^V:CR=^B:
23732 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
23733 # which were also in the original entry -- esr)
23734 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
23735 zen50|z50|Zentec Zephyr,
23737 cols#80, lines#24, xmc#1,
23738 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
23739 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
23740 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
23741 rmul@, smul@, use=adm+sgr,
23743 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
23744 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
23747 blink=\EM", clear=\EH\EJ, cnorm=\EP,
23748 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
23749 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
23750 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
23751 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
23752 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
23753 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
23754 smso=\EM$, smul=\EM0,
23756 ######## OBSOLETE UNIX CONSOLES
23759 #### Apollo consoles
23761 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
23762 # labeled HP700s now.
23765 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
23766 apollo|Apollo console,
23769 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
23770 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
23771 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
23772 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
23773 smso=\ES, smul=\EU, vpa=\EO+\s,
23775 # We don't know whether or not the apollo guys replicated DEC's firmware bug
23776 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
23777 # both these capabilities.
23778 apollo_15P|Apollo 15 inch display,
23779 rmir@, smir@, use=vt132,
23780 apollo_19L|Apollo 19 inch display,
23781 rmir@, smir@, use=vt132,
23782 apollo_color|Apollo color display,
23783 rmir@, smir@, use=vt132,
23787 # This actually describes the generic SVr4 display driver for Intel boxes.
23788 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
23789 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
23790 att6386|at386|386at|AT&T WGS 6386 console,
23792 cols#80, it#8, lines#25,
23793 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23794 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
23795 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
23796 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23797 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23798 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
23799 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
23800 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
23801 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
23802 is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B,
23803 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP,
23804 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
23805 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
23806 khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0,
23807 nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
23808 rmso=\E[m, rmul=\E[m, sc=\E7,
23809 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
23810 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
23811 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
23812 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index,
23814 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
23815 pc6300plus|AT&T 6300 plus,
23818 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
23819 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
23820 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
23821 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
23822 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
23823 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
23824 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
23825 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
23826 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23827 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
23829 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
23831 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
23832 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
23833 # is broken. All the special key sequences are broken, making it unusable
23834 # with Emacs. The problem stems from the following:
23836 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
23837 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
23838 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
23839 # uses resizable terminal windows, but the bundled terminal program always
23840 # uses an 80x24 window (and doesn't support seem to support a 132-column
23843 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
23844 # library which was a superset of SVr3.5 curses (called tam, for "terminal
23845 # access method".) tam includes support for real, overlapping windows,
23846 # onscreen function key labels, and bitmap graphics. But since the primary
23847 # user interface on the UNIX PC was a GUI program (ua, for "user
23848 # assistant",) and remote administration was considered important for the
23849 # machine, tam also supported VT100-compatible terminals attached to the
23850 # serial port or used across the StarLan network. To simulate the extra keys
23851 # not present on a VT100, users could press ESC and a two-letter sequence,
23852 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
23853 # however, were not the same as those sent by the actual Undo key. The
23854 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
23855 # (If you're interested in adding some of the tam calls to ncurses, btw, I
23856 # have the full documentation and several programs which use tam. It also
23857 # used an extended terminfo format to describe key sequences, special
23858 # highlighting modes, etc.)
23860 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
23861 # there are two sequences for every key-modifier combination (local keyboard
23862 # sequence and remote "VT100" sequence.) But I doubt many people are trying
23863 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
23864 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
23865 # seem to have been built from the manual describing the VT100 sequences.
23866 # This means it doesn't work for a real live UNIX PC.
23868 # FONTS: The UNIX PC also has a strange interpretation of "alternate
23869 # character set". Rather than the VT100 graphics you might expect, it allows
23870 # up to 8 custom fonts to be loaded at any given time. This means that
23871 # programs expecting VT100 graphics will usually be disappointed. For this
23872 # reason I have disabled the smacs/rmacs sequences, but they could easily be
23873 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
23874 # manpage), should you wish to do so:
23876 # SGR10 - Select font 0 - ESC [ 10 m or SO
23877 # SGR11 - Select font 1 - ESC [ 11 m or SI
23878 # SGR12 - Select font 2 - ESC [ 12 m
23880 # SGR17 - Select font 7 - ESC [ 17 m
23882 # Graphics for line drawing are not reliably found at *any* character
23883 # location because the UNIX PC has dynamically reloadable fonts. I use font
23884 # 0 for regular text and font 1 for italics, but this is by no means
23885 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
23887 # MISC: The cursor visible/cursor invisible sequences were swapped in the
23888 # distributed terminfo.
23890 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
23891 # the UNIX PC terminfo entry. The modified version works great with Lynx,
23892 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
23893 # attached by serial cable. In Emacs, even the Undo key works, and many
23894 # applications can now use the F1-F8 keys.
23897 # Terminfo entry for the AT&T Unix PC 7300
23898 # from escape(7) in Unix PC 7300 Manual.
23899 # Somewhat similar to a vt100-am (but different enough
23900 # to redo this from scratch.)
23902 # /***************************************************************
23904 # * FONT LOADING PROGRAM FOR THE UNIX PC
23906 # * This routine loads a font defined in the file ALTFONT
23907 # * into font memory slot #1. Once the font has been loaded,
23908 # * it can be used as an alternative character set.
23910 # * The call to ioctl with the argument WIOCLFONT is the key
23911 # * to this routine. For more information, see window(7) in
23912 # * the PC 7300 documentation.
23913 # ***************************************************************/
23914 # #include <string.h> /* needed for strcpy call */
23915 # #include <sys/window.h> /* needed for ioctl call */
23916 # #define FNSIZE 60 /* font name size */
23917 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
23919 # * The file /usr/lib/wfont/special.8.ft comes with the
23920 # * standard PC software. It defines a graphics character set
23921 # * similar to that of the Teletype 5425 terminal. To view
23922 # * this or other fonts in /usr/lib/wfont, use the command
23923 # * cfont <filename>. For further information on fonts see
23924 # * cfont(1) in the PC 7300 documentation.
23927 # struct altfdata /* structure for alt font data */
23929 # short altf_slot; /* memory slot number */
23930 # char altf_name[FNSIZE]; /* font name (file name) */
23934 # int wd; /* window in which altfont will be */
23935 # struct altfdata altf;
23936 # altf.altf_slot=1;
23937 # strcpy(altf.altf_name,ALTFONT);
23938 # for (wd =1; wd < 12; wd++) {
23939 # ioctl(wd, WIOCLFONT,&altf);
23943 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
23944 # they're confirmed by the man page for the System V display---esr)
23946 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
23948 cols#80, it#8, lines#24,
23949 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
23950 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
23951 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23952 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23953 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
23954 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
23955 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
23956 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
23957 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
23958 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
23959 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
23960 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
23961 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
23962 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
23963 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
23964 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
23965 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
23966 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
23967 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
23968 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
23969 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
23970 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
23973 #### Convergent Technology
23975 # Burroughs bought Convergent shortly before it merged with Univac.
23976 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
23977 # from 1991 or earlier).
23980 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
23981 # (aws: removed unknown :dn=^K: -- esr)
23982 aws|Convergent Technologies AWS workstation under UTX and Xenix,
23984 OTug#0, cols#80, lines#28, xmc#0,
23985 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
23986 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
23987 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
23988 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
23989 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
23990 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
23992 awsc|Convergent Technologies AWS workstation under CTOS,
23994 OTug#0, cols#80, lines#24, xmc#0,
23995 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
23996 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
23997 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
23998 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
24004 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
24005 # The digital uVax II's had a graphic display called a qdss. It was
24006 # supposed to be a high performance graphic accelerator, but it was
24007 # late to market and barely appeared before faster dumb frame buffers
24008 # appeared. I have only used this display while running X11. However,
24009 # during bootup, it was in text mode, and probably had a terminal emulator
24010 # within it. And that is what your termcap entry is for. In graphics
24011 # mode the screen size is 1024x864 pixels.
24012 qdss|qdcons|qdss glass tty,
24014 cols#128, lines#57,
24015 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
24016 cup=\E=%p1%c%p2%c, cuu1=^K,
24018 #### Fortune Systems consoles
24020 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
24021 # in their day; I (esr) used one myself for a year or so around 1984.
24022 # They had no graphics, though, and couldn't compete against Suns and
24026 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
24027 # (This had extension capabilities
24028 # :rv=\EH:re=\EI:rg=0:GG=0:\
24029 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
24030 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
24031 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
24032 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
24033 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
24034 # to force both magic cookie glitches off. Once upon a time, I
24035 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
24036 # function keys; thus the "Al" value for HM was certainly an error. I renamed
24037 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
24038 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
24039 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
24040 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
24041 fos|fortune|Fortune system,
24044 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
24045 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
24046 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
24047 cvvis=\E:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>,
24048 el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>,
24049 il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H, kcub1=^Aw\r,
24050 kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r,
24051 kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r,
24052 kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r,
24053 knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH, rmacs=^O, rmso=^\I`,
24054 rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP,
24056 #### Masscomp consoles
24058 # Masscomp has gone out of business. Their product line was purchased by a
24059 # company in Georgia (US) called "XS International", parts and service may
24060 # still be available through them.
24063 # (masscomp: ":MT:" changed to ":km:"; -- esr)
24064 masscomp|masscomp workstation console,
24066 cols#80, it#8, lines#24,
24067 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
24068 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24069 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
24070 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
24071 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
24072 masscomp1|masscomp large screen version 1,
24073 cols#104, lines#36, use=masscomp,
24074 masscomp2|masscomp large screen version 2,
24075 cols#64, lines#21, use=masscomp,
24080 # OSF/1 1.1 Snapshot 2
24081 pmcons|pmconsole|PMAX console,
24083 cols#128, lines#57,
24084 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
24085 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
24086 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
24088 #### Other consoles
24089 # The following is a version of the ibm-pc entry distributed with PC/IX,
24090 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
24091 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
24092 # (the former is untrue, and the latter failed under UCB/man); standout and
24093 # underline modes have been added. Note: this entry describes the "native"
24094 # capabilities of the PC monochrome display, without ANY emulation; most
24095 # communications packages (but NOT PC/IX connect) do some kind of emulation.
24096 pcix|PC/IX console,
24099 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
24100 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
24101 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
24104 # (ibmpcx: this entry used to be known as ibmx.
24105 # It formerly included the following extension capabilities:
24106 # :GC=b:GL=v:GR=t:RT=^J:\
24107 # :GH=\E[196g:GV=\E[179g:\
24108 # :GU=\E[193g:GD=\E[194g:\
24109 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
24110 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
24111 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
24112 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
24113 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
24114 # what was there before. -- esr)
24115 ibmpcx|xenix|ibmx|IBM PC xenix console display,
24118 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
24119 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24120 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
24121 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
24122 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
24123 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
24125 ######## OTHER OBSOLETE TYPES
24127 # These terminals are *long* dead -- these entries are retained for
24128 # historical interest only.
24131 #### Obsolete non-ANSI software emulations
24134 # CTRM terminal emulator
24135 # 1. underlining is not allowed with colors: first, is is simulated by
24136 # black on white, second, it disables background color manipulations.
24137 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
24138 # so we have to save their status in the static registers A, B and H
24139 # respectively, to be able to restore them when color changes
24140 # (because any color change turns off ALL attributes)
24141 # 3. <bold> and <rev> sequences alternate modes,
24142 # rather than simply entering them. Thus we have to check the
24143 # static register B and H to determine the status, before sending the
24145 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
24146 # and then reset colors
24147 # 5. implementation of the protect mode would badly penalize the performance.
24148 # we would have to use \E&bn sequence to turn off colors (as well as all
24149 # other attributes), and keep the status of protect mode in yet another
24150 # static variable. If someone really needs this mode, they would have to
24151 # create another terminfo entry.
24152 # 6. original color-pair is white on black.
24153 # store the information about colors into static registers
24154 # 7. set foreground color. it performs the following steps.
24155 # 1) turn off all attributes
24156 # 2) turn on the background and video attributes that have been turned
24157 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
24158 # 3) turn on foreground attributes
24159 # 4) store information about foreground into U,V,W static registers
24160 # 8. turn on background: similar to turn on foreground above
24161 ctrm|C terminal emulator,
24163 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
24164 pairs#63, pb#19200, vt#6,
24165 bel=^G, blink=\E&dA%{1}%PA,
24166 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
24167 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
24168 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
24169 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
24170 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
24171 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
24172 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
24173 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
24174 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
24176 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
24177 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
24178 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
24179 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
24180 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
24181 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
24182 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
24183 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
24184 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
24185 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
24186 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
24188 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
24189 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
24191 # gs6300 - can't use blue foreground, it clashes with underline;
24192 # it's simulated with cyan
24193 # Bug: The <op> capability probably resets attributes.
24194 # (gs6300: commented out <rmln> (no <smln>) --esr)
24195 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
24196 am, bce, msgr, xon,
24197 colors#8, cols#80, it#8, lines#24, pairs#63,
24198 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
24200 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
24201 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
24202 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
24203 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
24204 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
24205 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
24206 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
24207 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
24208 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
24209 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
24210 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
24211 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
24212 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
24214 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
24215 # MS-Kermit with Heath-19 emulation mode enabled
24216 # (h19k: changed ":pt@:" to ":it@"
24217 h19k|h19kermit|Heathkit emulation provided by Kermit (no auto margin),
24222 # Apple Macintosh with VersaTerm, a terminal emulator distributed by Synergy
24223 # Software (formerly Peripherals Computers & Supplies, Inc) of
24224 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
24225 # also be reached at support@synergy.com.
24226 versaterm|VersaTerm VT100 emulator for the Macintosh,
24228 cols#80, it#8, lines#24,
24229 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
24230 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
24231 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
24232 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
24233 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
24234 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
24235 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
24236 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
24237 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
24238 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
24239 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
24240 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
24243 # From: Rick Thomas <ihnp4!btlunix!rbt>
24244 # (xtalk: I added <rmam>/<smam> based on the init string.
24245 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
24246 am, mir, msgr, xon,
24247 cols#80, it#8, lines#24, vt#3, xmc#1,
24248 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
24249 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
24250 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
24251 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
24252 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
24253 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
24254 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
24255 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
24256 rmkx=\E[?1l\E>, rmso=\E[m\s,
24257 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
24258 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
24259 tbc=\E[3g, use=vt100+fnkeys,
24261 # The official PC terminal emulator program of the AT&T Product Centers.
24262 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
24263 simterm|attpc running simterm,
24266 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
24267 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
24268 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
24269 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
24271 #### Daisy wheel printers
24273 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
24274 # wheel terminals. These are now largely obsolete.
24277 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
24278 diablo1620|diablo1720|diablo450|ipsi|Diablo 1620,
24281 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
24282 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
24283 diablo1620-m8|diablo1640-m8|Diablo 1620 w/8 column left margin,
24285 is2=\r \E9, use=diablo1620,
24286 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
24287 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|Diablo 1640,
24288 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
24290 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
24292 diablo1640-lm|diablo-lm|xerox-lm|Diablo 1640 with indented left margin,
24294 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
24295 diablo1740-lm|630-lm|1730-lm|x1700-lm|Diablo 1740 printer,
24297 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
24298 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
24299 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
24300 # If no tab is set or the terminal's in a bad mood, it glitches the screen
24301 # around all of memory. Note that return puts a blank ("a return character")
24302 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
24303 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
24304 # curses won't work (some old BSD versions) because it doesn't clear this bit,
24305 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
24306 # I have been unable to get tabs set in all 96 lines - it always leaves at
24307 # least one line with no tabs in it, and once you tab through that line,
24308 # it completely weirds out.
24309 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
24312 cols#80, lines#24, lm#96,
24313 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
24314 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
24315 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
24316 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
24317 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
24321 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24322 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24323 gsi|mystery gsi terminal,
24326 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
24328 aj830|aj832|aj|Anderson Jacobson,
24330 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
24332 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
24333 aj510|Anderson-Jacobson model 510,
24336 clear=^L, cub1=^H, cuf1=\EX,
24337 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
24338 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
24339 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
24340 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
24341 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
24343 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
24344 # This is incomplete, but it's a start.
24345 nec5520|nec|spinwriter|NEC 5520,
24348 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
24349 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
24351 qume5|qume|Qume Sprint 5,
24354 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24355 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24356 # I suspect the Xerox 1720 is the same as the Diablo 1620.
24357 xerox1720|x1720|x1750|Xerox 1720,
24360 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
24363 #### Miscellaneous obsolete terminals, manufacturers unknown
24365 # If you have any information about these (like, a manufacturer's name,
24366 # and a date on the serial-number plate) please send it!
24368 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
24371 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
24372 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
24375 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
24376 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
24377 kf4=\E8, rmso=\Em^C, smso=\Em^L,
24378 cops10|cops|cops-10|cops 10,
24381 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
24382 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
24383 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
24386 # http://www.bitsavers.org/pdf/datapro/alphanumeric_terminals/Datapro_C25_Datagraphix.pdf
24388 # DatagraphiX, Inc.
24389 # (a subsidiary of General Dynamics),
24390 # P.O. Box 82449, San Diego, California 92138.
24392 # (d132: removed duplicate :ic=\E5:,
24393 # merged in capabilities from a BRL entry -- esr)
24394 d132|datagraphix|DatagraphiX 132a,
24397 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
24398 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
24399 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
24400 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
24401 # The d800 was an early portable terminal from c.1984-85 that looked a lot
24402 # like the original Compaq `lunchbox' portable (but no handle). It had a VT220
24403 # mode (which is what this entry looks like) and several other lesser-known
24406 OTbs, am, da, db, msgr, xhp,
24407 cols#80, it#8, lines#24,
24408 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
24409 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
24410 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
24411 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
24412 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
24413 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
24414 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24415 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
24416 digilog|digilog 333,
24419 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
24421 # The DWK was a terminal manufactured in the Soviet Union c.1986
24422 dwk|dwk-vt|dwk terminal,
24424 cols#80, it#8, lines#24,
24425 acsc=+\^\,Q-S.M0\177`+a:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~
24427 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
24428 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
24429 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
24430 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
24431 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
24432 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
24433 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
24434 sgr0=\EX, smacs=\EF, smso=\ET,
24435 env230|envision230|envision 230 graphics terminal,
24437 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
24438 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
24440 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
24441 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
24442 # coupler attached, the whole rig fitting in a suitcase and more or less
24443 # portable. Hot stuff for c.1977 :-) -- esr
24444 ep48|ep4080|execuport 4080,
24447 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
24448 ep40|ep4000|execuport 4000,
24449 cols#136, use=ep4080,
24450 # Adam Thompson <athompso@pangea.ca> tells us:
24451 # Informer series - these are all portable units, resembling older
24452 # automatic bread-baking machines. The terminal looks like a `clamshell'
24453 # design, but isn't. The structure is similar to the Direct terminals,
24454 # but only half the width. The entire unit is only about 10" wide.
24455 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
24456 # keyboard. All the keys are crammed together, much like some laptop
24457 # PCs today, but perhaps less well organized...all these units have a
24458 # bewildering array of plugs on the back, including a built-in modem.
24459 # The 305 was a color version of the 304; the 306 and 307 were mono and
24460 # color terminals built for IBM bisync protocols.
24461 # From: Paul Leondis <unllab@amber.berkeley.edu>
24462 ifmr|Informer D304,
24465 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
24466 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
24467 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
24469 # Entry largely based on wy60 and has the features of wy60ak.
24470 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
24471 am, bw, hs, km, mir, msgr, ul, xon,
24472 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
24473 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
24474 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
24475 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
24476 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
24477 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
24478 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
24480 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
24481 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
24483 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
24484 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
24485 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
24486 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
24487 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
24488 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
24489 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
24490 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
24491 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
24492 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
24493 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
24494 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
24495 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
24496 rs3=\EwG\Ee($<150>,
24497 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
24498 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
24499 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
24500 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
24501 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
24503 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
24504 uc=\EG8\EG0, use=adm+sgr,
24505 teletec|Teletec Datascreen,
24508 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
24510 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
24511 # This description is for the LANPAR Technologies VISION 3220
24512 # terminal from 1984/85. The function key definitions k0-k5 represent the
24513 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
24514 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
24516 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
24517 # I had a couple of scopes (3221) like this once where I used to work, around
24518 # the 1987 time frame if memory serves me correctly. These scopes were made
24519 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
24520 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
24521 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
24522 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
24523 # (3221) cost about $1500 each, and one was always broken -- had to be sent
24524 # back to the shop for repairs.
24525 # The only real advantage these scopes had over the VT-240's were:
24526 # 1) They were faster in the Regis display, or at least the ones I did
24527 # 2) They had a handy debugging feature where you could split-screen the
24528 # scope, the graphics would appear on the top, and the REGIS commands would
24529 # appear on the bottom. I don't remember the VT-240s being able to do that.
24530 # I would swear that LANPAR Technologies was in MA someplace, but since I
24531 # don't work at the same place anymore, and those terminals and manuals were
24532 # long since junked, I cannot be any more sure than that.
24534 # (v3220: removed obsolete ":kn#10:",
24535 # I added <rmam>/<smam> based on the init string -- esr)
24536 v3220|LANPAR Vision II model 3220/3221/3222,
24537 OTbs, am, mir, xenl,
24538 cols#80, it#8, lines#24,
24539 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
24540 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24541 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
24542 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
24543 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
24544 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
24545 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
24546 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24547 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
24548 ######## ICH/ICH1 VERSUS RMIR/SMIR
24550 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
24551 # are present; the symptom is doubled characters in an update using insert.
24552 # These applications are technically correct; in both 4.3BSD termcap and
24553 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
24554 # unless the terminal needs both. To my knowledge, no terminal still in this
24555 # file requires both other than the very obsolete dm2500.
24557 # For ncurses-based applications this is not a problem, as ncurses uses
24558 # one or the other as appropriate but never mixes the two. Therefore we
24559 # have not corrected entries like `linux' and `xterm' that specify both.
24560 # If you see doubled characters from these, use the linux-nic and xterm-nic
24561 # entries that suppress ich/ich1. And upgrade to ncurses!
24564 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
24566 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
24567 # ECMA-48 standards are said to be almost identical, but are not the same
24568 # as X3.64 (though for practical purposes they are close supersets of it).
24570 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
24571 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
24572 # Coded Character Sets"), include your snail-mail address, and you should
24573 # receive the document in due course. Don't expect an email acknowledgment.
24575 # Related standards include "X3.4-1977: American National Standard Code for
24576 # Information Interchange" (the ASCII standard) and "X3.41.1974:
24577 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
24578 # American National Standard for Information Interchange." I believe (but
24579 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
24583 #### VT100/ANSI/ECMA-48
24585 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
24586 # and ECMA-48 Control Functions for Coded Character Sets.
24588 # Much of the content of this comment is adapted from a table prepared by
24589 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
24590 # discussion of some terminfo-related issues, and updates to capture ECMA-48
24591 # have been added. Control functions described in ECMA-48 only are tagged
24592 # with * after their names.
24594 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
24595 # sequences. In the main table, \E stands for an escape (\033) character,
24596 # SPC for space. Pn stands for a single numeric parameter to be inserted
24597 # in decimal ASCII. Ps stands for a list of such parameters separated by
24598 # semicolons. Parameter meanings for most parameterized sequences are
24599 # described in the notes.
24601 # Sequence Sequence Parameter or
24602 # Mnemonic Name Sequence Value Mode terminfo
24603 # -----------------------------------------------------------------------------
24604 # APC Applicatn Program Command \E _ - Delim -
24605 # BEL Bell * ^G - - bel
24606 # BPH Break Permitted Here * \E B - * -
24607 # BS BackSpace * ^H - EF -
24608 # CAN Cancel * ^X - - - (A)
24609 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
24610 # CCH Cancel Previous Character \E T - - -
24611 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
24612 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
24613 # CMD Coding Method Delimiter * \E
24614 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
24615 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
24616 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
24617 # CSI Control Sequence Intro \E [ - Intro -
24618 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
24619 # CUB Cursor Backward \E [ Pn D 1 eF cub
24620 # CUD Cursor Down \E [ Pn B 1 eF cud
24621 # CUF Cursor Forward \E [ Pn C 1 eF cuf
24622 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
24623 # CUU Cursor Up \E [ Pn A 1 eF cuu
24624 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
24625 # DA Device Attributes \E [ Pn c 0 - -
24626 # DAQ Define Area Qualification \E [ Ps o 0 - -
24627 # DCH Delete Character \E [ Pn P 1 eF dch
24628 # DCS Device Control String \E P - Delim -
24629 # DL Delete Line \E [ Pn M 1 eF dl
24630 # DLE Data Link Escape * ^P - - -
24631 # DMI Disable Manual Input \E \ - Fs -
24632 # DSR Device Status Report \E [ Ps n 0 - - (I)
24633 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
24634 # EA Erase in Area \E [ Ps O 0 eF - (J)
24635 # ECH Erase Character \E [ Pn X 1 eF ech
24636 # ED Erase in Display \E [ Ps J 0 eF ed (J)
24637 # EF Erase in Field \E [ Ps N 0 eF -
24638 # EL Erase in Line \E [ Ps K 0 eF el (J)
24639 # EM End of Medium * ^Y - - -
24640 # EMI Enable Manual Input \E b Fs -
24641 # ENQ Enquire ^E - - -
24642 # EOT End Of Transmission ^D - * -
24643 # EPA End of Protected Area \E W - - - (K)
24644 # ESA End of Selected Area \E G - - -
24645 # ESC Escape ^[ - - -
24646 # ETB End Transmission Block ^W - - -
24647 # ETX End of Text ^C - - -
24648 # FF Form Feed ^L - - -
24649 # FNK Function Key * \E [ Pn SPC W - - -
24650 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
24651 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
24652 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
24653 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
24654 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
24655 # HPB Char Position Backward \E [ j 1 FE -
24656 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
24657 # HT Horizontal Tab * ^I - FE - (N)
24658 # HTJ Horz Tab w/Justification \E I - FE -
24659 # HTS Horizontal Tab Set \E H - FE hts
24660 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
24661 # ICH Insert Character \E [ Pn @ 1 eF ich
24662 # IDCS ID Device Control String \E [ SPC O - * -
24663 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
24664 # IL Insert Line \E [ Pn L 1 eF il
24665 # IND Index \E D - FE -
24666 # INT Interrupt \E a - Fs -
24667 # JFY Justify \E [ Ps SPC F 0 FE -
24668 # IS1 Info Separator #1 * ^_ - * -
24669 # IS2 Info Separator #1 * ^^ - * -
24670 # IS3 Info Separator #1 * ^] - * -
24671 # IS4 Info Separator #1 * ^\ - * -
24672 # LF Line Feed ^J - - -
24673 # LS1R Locking Shift Right 1 * \E ~ - - -
24674 # LS2 Locking Shift 2 * \E n - - -
24675 # LS2R Locking Shift Right 2 * \E } - - -
24676 # LS3 Locking Shift 3 * \E o - - -
24677 # LS3R Locking Shift Right 3 * \E | - - -
24678 # MC Media Copy \E [ Ps i 0 - - (S)
24679 # MW Message Waiting \E U - - -
24680 # NAK Negative Acknowledge * ^U - * -
24681 # NBH No Break Here * \E C - - -
24682 # NEL Next Line \E E - FE nel (D)
24683 # NP Next Page \E [ Pn U 1 eF -
24684 # NUL Null * ^@ - - -
24685 # OSC Operating System Command \E ] - Delim -
24686 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
24687 # PFS Page Format Selection * \E Pn SPC J 0 - -
24688 # PLD Partial Line Down \E K - FE - (T)
24689 # PLU Partial Line Up \E L - FE - (U)
24690 # PM Privacy Message \E ^ - Delim -
24691 # PP Preceding Page \E [ Pn V 1 eF -
24692 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
24693 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
24694 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
24695 # PTX Parallel Texts * \E [ \ - - -
24696 # PU1 Private Use 1 \E Q - - -
24697 # PU2 Private Use 2 \E R - - -
24698 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
24699 # REP Repeat Char or Control \E [ Pn b 1 - rep
24700 # RI Reverse Index \E M - FE - (V)
24701 # RIS Reset to Initial State \E c - Fs -
24702 # RM Reset Mode * \E [ Ps l - - - (W)
24703 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
24704 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
24705 # SCI Single-Char Introducer \E Z - - -
24706 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
24707 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
24708 # SD Scroll Down \E [ Pn T 1 eF rin
24709 # SDS Start Directed String * \E [ Pn ] 1 - -
24710 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
24711 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
24712 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
24713 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
24714 # SI Shift In ^O - - - (P)
24715 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
24716 # SL Scroll Left \E [ Pn SPC @ 1 eF -
24717 # SLH Set Line Home * \E [ Pn SPC U - - -
24718 # SLL Set Line Limit * \E [ Pn SPC V - - -
24719 # SLS Set Line Spacing * \E [ Pn SPC h - - -
24720 # SM Select Mode \E [ Ps h none - - (W)
24721 # SO Shift Out ^N - - - (Q)
24722 # SOH Start Of Heading * ^A - - -
24723 # SOS Start of String * \E X - - -
24724 # SPA Start of Protected Area \E V - - - (Z)
24725 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
24726 # SPH Set Page Home * \E [ Ps SPC G - - -
24727 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
24728 # SPL Set Page Limit * \E [ Ps SPC j - - -
24729 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
24730 # SR Scroll Right \E [ Pn SPC A 1 eF -
24731 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
24732 # SRS Start Reversed String * \E [ Ps [ 0 - -
24733 # SSA Start of Selected Area \E F - - -
24734 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
24735 # SSW Set Space Width * \E [ Pn SPC [ none - -
24736 # SS2 Single Shift 2 (G2 set) \E N - Intro -
24737 # SS3 Single Shift 3 (G3 set) \E O - Intro -
24738 # ST String Terminator \E \ - Delim -
24739 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
24740 # STS Set Transmit State \E S - - -
24741 # STX Start pf Text * ^B - - -
24742 # SU Scroll Up \E [ Pn S 1 eF indn
24743 # SUB Substitute * ^Z - - -
24744 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
24745 # SYN Synchronous Idle * ^F - - -
24746 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
24747 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
24748 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
24749 # TBC Tab Clear \E [ Ps g 0 FE tbc
24750 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
24751 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
24752 # TSS Thin Space Specification \E [ Pn SC E none FE -
24753 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
24754 # VPB Line Position Backward * \E [ Pn k 1 FE -
24755 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
24756 # VT Vertical Tabulation * ^K - FE -
24757 # VTS Vertical Tabulation Set \E J - FE -
24759 # ---------------------------------------------------------------------------
24763 # Some control characters are listed in the ECMA-48 standard without
24764 # being assigned functions relevant to terminal control there (they
24765 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
24766 # here anyway for completeness.
24768 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
24770 # (B) There seems to be some confusion abroad between CHA and HPA. Most
24771 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
24772 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
24773 # preserved the CHA abbreviation.
24775 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
24776 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
24777 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
24778 # CHT abbreviation.
24780 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
24782 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
24785 # (F) CTC parameter values:
24786 # 0 = set char tab,
24787 # 1 = set line tab,
24788 # 2 = clear char tab,
24789 # 3 = clear line tab,
24790 # 4 = clear all char tabs on current line,
24791 # 5 = clear all char tabs,
24792 # 6 = clear all line tabs.
24794 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
24795 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
24796 # Position Absolute" but retains the HVP abbreviation.
24798 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
24801 # (I) DSR parameter values:
24804 # 2 = busy, will send DSR later,
24806 # 4 = malfunction, will send DSR later,
24808 # 6 = request CPR response.
24810 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
24811 # 0 = clear to end,
24812 # 1 = clear from beginning,
24815 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
24817 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
24819 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
24820 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
24821 # Position Relative" but retains the HPR abbreviation.
24823 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
24826 # (O) SGR parameter values:
24827 # 0 = default mode (attributes off),
24834 # 7 = reverse video,
24836 # 9 = crossed-out (marked for deletion),
24837 # 10 = primary font,
24838 # 10 + n (n in 1..9) = nth alternative font,
24840 # 21 = double underline,
24845 # 26 = proportional spacing,
24857 # 38 = set fg color as in CCITT T.416,
24858 # 39 = set default fg color,
24867 # 48 = set bg color as in CCITT T.416,
24868 # 49 = set default bg color,
24869 # 50 = turn off 26,
24873 # 54 = turn off 51 & 52,
24874 # 55 = not overlined,
24875 # 56-59 = reserved,
24876 # 61-65 = variable highlights for ideograms.
24878 # (P) SI is also called LSO, Locking Shift Zero.
24880 # (Q) SI is also called LS1, Locking Shift One.
24882 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
24883 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
24884 # Absolute' but retains the VPA abbreviation.
24886 # (S) MC parameters:
24887 # 0 = start xfer to primary aux device,
24888 # 1 = start xfer from primary aux device,
24889 # 2 = start xfer to secondary aux device,
24890 # 3 = start xfer from secondary aux device,
24891 # 4 = stop relay to primary aux device,
24892 # 5 = start relay to primary aux device,
24893 # 6 = stop relay to secondary aux device,
24894 # 7 = start relay to secondary aux device.
24896 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
24899 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
24902 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
24904 # (W) RM/SM modes are as follows:
24905 # 1 = Guarded Area Transfer Mode (GATM),
24906 # 2 = Keyboard Action Mode (KAM),
24907 # 3 = Control Representation Mode (CRM),
24908 # 4 = Insertion Replacement Mode (IRM),
24909 # 5 = Status Report Transfer Mode (SRTM),
24910 # 6 = Erasure Mode (ERM),
24911 # 7 = Line Editing Mode (LEM),
24912 # 8 = Bi-Directional Support Mode (BDSM),
24913 # 9 = Device Component Select Mode (DCSM),
24914 # 10 = Character Editing Mode (HEM),
24915 # 11 = Positioning Unit Mode (PUM),
24916 # 12 = Send/Receive Mode (SRM),
24917 # 13 = Format Effector Action Mode (FEAM),
24918 # 14 = Format Effector Transfer Mode (FETM),
24919 # 15 = Multiple Area Transfer Mode (MATM),
24920 # 16 = Transfer Termination Mode (TTM),
24921 # 17 = Selected Area Transfer Mode (SATM),
24922 # 18 = Tabulation Stop Mode (TSM),
24923 # 19 = Editing Boundary Mode (EBM),
24924 # 20 = Line Feed New Line Mode (LF/NL),
24925 # 21 = Graphic Rendition Combination Mode (GRCM),
24926 # 22 = Zero Default Mode (ZDM).
24928 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
24929 # but are listed here for reference.
24931 # (X) Select Alternate Presentation Variants is used only for non-Latin
24934 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
24936 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
24939 # ---------------------------------------------------------------------------
24943 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
24944 # X3.64 Control Sequence Introducer is the two characters "Escape ["
24946 # Delim a Delimiter
24948 # x/y identifies a character by position in the ASCII table (column/row)
24950 # eF editor function (see explanation)
24952 # FE format effector (see explanation)
24954 # F is a Final character in
24955 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
24956 # a control sequence (F from 4/0 to 7/14)
24958 # Gs is a graphic character appearing in strings (Gs ranges from
24959 # 2/0 to 7/14) in the ASCII table
24961 # Ce is a control represented as a single bit combination in the C1 set
24962 # of controls in an 8-bit character set
24964 # C0 the familiar set of 7-bit ASCII control characters
24966 # C1 roughly, the set of control chars available only in 8-bit systems.
24967 # This is too complicated to explain fully here, so read Jim Fleming's
24968 # article in the February 1983 BYTE, especially pages 214 through 224.
24970 # Fe is a Final character of a 2-character Escape sequence that has an
24971 # equivalent representation in an 8-bit environment as a Ce-type
24972 # (Fe ranges from 4/0 to 5/15)
24974 # Fs is a Final character of a 2-character Escape sequence that is
24975 # standardized internationally with identical representation in 7-bit
24976 # and 8-bit environments and is independent of the currently
24977 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
24979 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
24982 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
24985 # Pn is a numeric parameter in a control sequence, a string of zero or
24986 # more characters ranging from 3/0 to 3/9 in the ASCII table
24988 # Ps is a variable number of selective parameters in a control sequence
24989 # with each selective parameter separated from the other by the code
24990 # 3/11 (which usually represents a semicolon); Ps ranges from
24991 # 3/0 to 3/9 and includes 3/11
24993 # * Not relevant to terminal control, listed for completeness only.
24995 # Format Effectors versus Editor Functions
24997 # A format effector specifies how following output is to be displayed.
24998 # An editor function allows you to modify the display. Informally
24999 # format effectors may be destructive; format effectors should not be.
25001 # For instance, a format effector that moves the "active position" (the
25002 # cursor or equivalent) one space to the left would be useful when you want to
25003 # create an overstrike, a compound character made of two standard characters
25004 # overlaid. Control-H, the Backspace character, is actually supposed to be a
25005 # format effector, so you can do this. But many systems use it in a
25006 # nonstandard fashion, as an editor function, deleting the character to the
25007 # left of the cursor and moving the cursor left. When Control-H is assumed to
25008 # be an editor function, you cannot predict whether its use will create an
25009 # overstrike unless you also know whether the output device is in an "insert
25010 # mode" or an "overwrite mode". When Control-H is used as a format effector,
25011 # its effect can always be predicted. The familiar characters carriage
25012 # return, linefeed, formfeed, etc., are defined as format effectors.
25014 # NOTES ON THE DEC VT100 IMPLEMENTATION
25016 # Control sequences implemented in the VT100 are as follows:
25018 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
25019 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
25021 # plus several private DEC commands.
25023 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
25025 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
25026 # Erase from beginning of line to cursor Esc [ 1 K
25027 # Erase line containing cursor Esc [ 2 K
25028 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
25029 # Erase from beginning of screen to cursor Esc [ 1 J
25030 # Erase entire screen Esc [ 2 J
25032 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
25033 # Esc [ 2 J, but this is wrong; the default is 0.
25035 # The VT100 responds to receiving the DA (Device Attributes) control
25037 # Esc [ c (or Esc [ 0 c)
25039 # by transmitting the sequence
25043 # where Ps is a character that describes installed options.
25045 # The VT100's cursor location can be read with the DSR (Device Status
25050 # The VT100 reports by transmitting the CPR sequence
25054 # where Pl is the line number and Pc is the column number (in decimal).
25056 # The specification for the DEC VT100 is document EK-VT100-UG-003.
25060 # Here is a description of the color and attribute controls supported in the
25061 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
25062 # terminal emulators for Intel boxes obey these. They are a proper subset
25063 # of the ECMA-48 escapes.
25065 # 0 all attributes off
25066 # 1 foreground bright
25068 # 5 blink on/background bright (not reliable with brown)
25070 # 8 set blank (non-display)
25071 # 10 set primary font
25072 # 11 set first alternate font (on PCs, display ROM characters 1-31)
25073 # 12 set second alternate font (on PCs, display IBM high-half chars)
25075 # Color attribute sets
25076 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
25077 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
25078 # Bright black becomes gray. Bright brown becomes yellow,
25079 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
25081 # * If the 5 attribute is on and you set a background color (40-47) it is
25082 # supposed to enable bright background.
25084 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
25085 # when you try to set a "bright brown" (yellow) background with attribute
25086 # 5 (you get a blinking yellow foreground instead). A few displays
25087 # (including the System V console) support an attribute 6 that undoes this
25088 # braindamage (this is required by iBCS2).
25090 # * Some older versions of ANSI.SYS have a bug that causes them to require
25091 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
25094 #### Intel Binary Compatibility Standard
25096 # For comparison, here are the capabilities implied by the Intel Binary
25097 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
25098 # These recommendations are optional. IBCS2 allows the leading escape to
25099 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
25100 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
25101 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
25102 # terminfo entry are followed with the corresponding capability in parens:
25104 # CSI <n>k disable (n=0) or enable (n=1) keyclick
25105 # CSI 2h lock keyboard
25106 # CSI 2i send screen as input
25107 # CSI 2l unlock keyboard
25108 # CSI 6m enable background color intensity
25109 # CSI <0-2>c reserved
25110 # CSI <0-59>m select graphic rendition
25111 # CSI <n>;<m>H (cup) cursor to line n and column m
25112 # CSI <n>;<m>f cursor to line n and column m
25113 # CSI <n>@ (ich) insert characters
25114 # CSI <n>A (cuu) cursor up n lines
25115 # CSI <n>B (cud) cursor down n lines
25116 # CSI <n>C (cuu) cursor right n characters
25117 # CSI <n>D (cud) cursor left n characters
25118 # CSI <n>E cursor down n lines and in first column
25119 # CSI <n>F cursor up n lines and in first column
25120 # CSI <n>G (hpa) position cursor at column n-1
25121 # CSI <n>J (ed) erase in display
25122 # CSI <n>K (el) erase in line
25123 # CSI <n>L (il) insert line(s)
25124 # CSI <n>P (dch) delete characters
25125 # CSI <n>S (indn) scroll up n lines
25126 # CSI <n>T (rin) scroll down n lines
25127 # CSI <n>X (ech) erase characters
25128 # CSI <n>Z (cbt) back up n tab stops
25129 # CSI <n>` cursor to column n on line
25130 # CSI <n>a (cuu) cursor right n characters
25131 # CSI <n>d (vpa) cursor to line n
25132 # CSI <n>e cursor down n lines and in first column
25133 # CSI <n>g (cbt) clear all tabs
25134 # CSI <n>z make virtual terminal n active
25135 # CSI ?7h (smam) turn automargin on
25136 # CSI ?7l (rmam) turn automargin off
25137 # CSI s save cursor position
25138 # CSI u restore cursor position to saved value
25139 # CSI =<c>A set overscan color
25140 # CSI =<c>F set normal foreground color
25141 # CSI =<c>G set normal background color
25142 # CSI =<c>H set reverse foreground color
25143 # CSI =<c>I set reverse foreground color
25144 # CSI =<c>J set graphic foreground color
25145 # CSI =<c>K set graphic foreground color
25146 # CSI =<n>g (dispc) display n from alternate graphics character set
25147 # CSI =<p>;<d>B set bell parameters
25148 # CSI =<s>;<e>C set cursor parameters
25149 # CSI =<x>D enable/disable intensity of background color
25150 # CSI =<x>E set/clear blink vs. bold background
25151 # CSI 7 (sc) (sc) save cursor position
25152 # CSI 8 (rc) (rc) restore cursor position to saved value
25153 # CSI H (hts) (hts) set tab stop
25154 # CSI Q<n><string> define function key string
25155 # (string must begin and end with delimiter char)
25156 # CSI c (clear) clear screen
25158 # The lack of any specification for attributes in SGR (among other things)
25159 # makes this a wretchedly weak standard. The table above is literally
25160 # everything iBSC2 has to say about terminal escape sequences; there is
25161 # no further discussion of their meaning or how to set the parameters
25162 # in these sequences at all.
25165 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
25167 # The historical termcap file entries were written primarily in 4.4BSD termcap.
25168 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
25169 # with the extension names chosen for compatibility with the termcap names
25170 # assigned in System V terminfo. There are some variant extension sets out
25171 # there. We try to describe them here.
25173 #### XENIX extensions:
25175 # The XENIX extensions include a set of function-key capabilities as follows:
25177 # code XENIX variable name terminfo name name clashes?
25178 # ---- ------------------- ------------- -----------------------
25180 # CR key_char_right
25181 # CW key_change_window create_window
25183 # HM key_home khome
25185 # LD key_delete_line kdl1
25186 # LF key_linefeed label_off
25187 # NU key_next_unlocked_cell
25188 # PD key_page_down knp
25190 # PN start_print mc5
25192 # PS stop_print mc4
25193 # PU key_page_up kpp pulse
25194 # RC key_recalc remove_clock
25195 # RF key_toggle_ref req_for_input
25196 # RT key_return kent
25197 # UP key_up_arrow kcuu1 parm_up_cursor
25199 # WR key_word_right
25201 # The XENIX extensions also include the following character-set and highlight
25204 # XENIX terminfo function
25205 # ----- -------- ------------------------------
25206 # GS smacs start alternate character set
25207 # GE rmacs end alternate character set
25208 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
25209 # bo blink begin blink (not used in /etc/termcap)
25210 # be end blink (not used in /etc/termcap)
25211 # bb blink glitch (not used in /etc/termcap)
25212 # it dim begin dim (not used in /etc/termcap)
25213 # ie end dim (not used in /etc/termcap)
25214 # ig dim glitch (not used in /etc/termcap)
25216 # Finally, XENIX also used the following forms-drawing capabilities:
25218 # single double type ASCII approximation
25219 # ------ ------ ------------- -------------------
25220 # GV Gv vertical line |
25221 # GH Gv horizontal line - _
25222 # G1 G5 top right corner _ |
25223 # G2 G6 top left corner |
25224 # G3 G7 bottom left corner |_
25225 # G4 G8 bottom right corner _|
25226 # GD Gd down-tick character T
25227 # GL Gl left-tick character -|
25228 # GR Gr right-tick character |-
25229 # GC Gc middle intersection -|-
25230 # GU Gu up-tick character _|_
25232 # These were invented to take advantage of the IBM PC ROM character set. One
25233 # can compose an acsc string from the single-width characters as follows
25234 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
25235 # When translating a termcap file, ncurses tic will do this automatically.
25236 # The double forms characters don't fit the SVr4 terminfo model.
25238 #### AT&T Extensions:
25240 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
25241 # nonstandard capabilities. Its signature is the KM capability, used to name
25242 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
25243 # set. Comments in the original, and a little cross-checking with other AT&T
25244 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
25245 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
25246 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
25247 # cursor invisible), and CV=:ve: (make cursor normal).
25251 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
25252 # have the System V capabilities up to SVr1 level. After that, it supports
25253 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
25254 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
25255 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
25256 # HP binary format incompatible with SVr4's.
25258 #### IBM Extensions
25260 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
25261 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
25262 # capabilities following prtr_non with the following special capabilities:
25263 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
25264 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
25265 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
25266 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
25267 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
25268 # renamed (to kcbt and kslt). The places in the box[12] capabilities
25269 # correspond to acsc chars, here is the mapping:
25271 # box1[0] = ACS_ULCORNER
25272 # box1[1] = ACS_HLINE
25273 # box1[2] = ACS_URCORNER
25274 # box1[3] = ACS_VLINE
25275 # box1[4] = ACS_LRCORNER
25276 # box1[5] = ACS_LLCORNER
25277 # box1[6] = ACS_TTEE
25278 # box1[7] = ACS_RTEE
25279 # box1[8] = ACS_BTEE
25280 # box1[9] = ACS_LTEE
25281 # box1[10] = ACS_PLUS
25283 # The box2 characters are the double-line versions of these forms graphics.
25284 # The AIX binary terminfo format is incompatible with SVr4's.
25286 #### Iris console extensions:
25288 # HS is half-intensity start; HE is half-intensity end
25289 # CT is color terminal type (for Curses & rogue)
25290 # CP is color change escape sequence
25291 # CZ are color names (for Curses & rogue)
25293 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
25295 #### TC Extensions:
25297 # There is a set of extended termcaps associated with something
25298 # called the "Terminal Control" or TC package created by MainStream Systems,
25299 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
25300 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
25301 # that flags color terminals.
25303 ######## NCURSES USER-DEFINABLE CAPABILITIES
25305 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
25306 # infocmp to manipulate user-definable capabilities. Those that are intended
25307 # for use in either terminfo or termcap use 2-character names. Extended
25308 # function keys do not use 2-character names, and are available only with
25311 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
25312 # tic/infocmp, and uses this database (with a few changes). There are a few
25313 # differences, noted in
25314 # https://invisible-island.net/ncurses/ncurses-netbsd.html
25316 # ncurses makes explicit checks for a few user-definable capabilities: AX,
25317 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
25319 #### SCREEN Extensions:
25321 # The screen program uses the termcap interface. It recognizes a few useful
25322 # nonstandard capabilities. Those are used in this file.
25324 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
25326 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
25327 # E0 (str) Switch charset 'G0' back to standard charset.
25328 # S0 (str) Switch charset 'G0' to the specified charset.
25329 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
25332 # AX is relatively straightforward; it is interpreted by ncurses to say that
25333 # SGR 39/49 reset the terminal's foreground and background colors to their
25336 # XT is harder, since screen's manpage does not give more details. For that,
25337 # we must read screen's source-code. For example, when XT is set, screen
25340 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
25341 # screen may also set the terminal's name, which is (for xterm) distinct
25342 # from the icon name.
25343 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
25344 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
25345 # this is an rxvt feature.
25346 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
25347 # These are from xterm, although xterm accepts mouse codes that may not be
25348 # recognized by screen, e.g., 1005, 1006.
25349 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
25350 # sequence. However, because screen uses only termcap, the values returned
25351 # by Af/Ab are not usable because they rely on expressions that termcap
25352 # does not support. Therefore, screen uses a hardcoded string to work
25353 # around the limitation. In a few cases, screen also uses tparm, which
25354 # is a terminfo function rather than termcap.
25355 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
25356 # g) screen also uses the feature to decide whether to pay attention to other
25357 # xterm-related features which are unrelated to the description in the
25360 # Since XT is useful only when the outer terminal matches screen's assumptions,
25361 # it is appropriate to use it in the derived terminal descriptions such as
25362 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
25364 # The other ISO-2022 features are rarely used, but provided here to make
25365 # screen's termcap features available.
25367 #### XTERM Extensions:
25369 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
25370 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
25371 # additional function-key strings. Some other developers copied the feature,
25372 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
25373 # these key definitions less ambiguous.
25375 # A few terminals provide similar functionality (sending distinct keys when
25376 # a modifier is used), including rxvt.
25378 # These are the extended keys defined in this file:
25380 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
25381 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
25382 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
25383 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
25385 # Here are the other xterm-related extensions which are used in this file:
25387 # Cr is a string capability which resets the cursor color
25388 # Cs is a string capability which sets the cursor color to a given value.
25389 # The single string parameter is the color name/number, according to the
25391 # Ms modifies the selection/clipboard. Its parameters are
25392 # p1 = the storage unit (clipboard, selection or cut buffer)
25393 # p2 = the base64-encoded clipboard content.
25394 # Se resets the cursor style to the terminal power-on default.
25395 # Ss is a string capability with one numeric parameter. It is used to set the
25396 # cursor style as described by the DECSCUSR function to a block or
25398 # TS is a string capability which acts like "tsl", but uses no parameter and
25399 # goes to the first column of the "status line".
25400 # XM is a string capability which overrides ncurses's built-in string which
25401 # enables/disables xterm mouse mode.
25402 # xm shows the format of the mouse responses. Parameters:
25406 # p4 = state, e.g., pressed or released
25407 # p5 = y-ordinate starting region
25408 # p6 = x-ordinate starting region
25409 # p7 = y-ordinate ending region
25410 # p8 = x-ordinate ending region
25411 # Other extensions, used in xm:
25414 #### Miscellaneous extensions:
25416 # csr clears the status line
25417 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
25418 # This was implemented for the Hurd.
25419 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
25420 # experimental feature of tmux.
25421 # CO gives the number of indexed ("ANSI") colors which overlay an RGB color
25423 # E3 clears the terminal's scrollback buffer. This was implemented in the
25424 # Linux 3.0 kernel as a security feature. It matches a feature which was
25425 # added in xterm patch #107.
25426 # U8 is a numeric capability which denotes a terminal emulator which does not
25427 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
25428 # value to enable it.
25429 # Smulx modifies the appearance of underlines in VTE, December 2017.
25431 ######## CHANGE HISTORY
25433 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
25434 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
25435 # maintained by Eric S. Raymond as part of the ncurses project.
25437 # This file contains all the capability information present in John Kunze's
25438 # last version of the termcap master file, except as noted in the change
25439 # comments at end of file. Some information about very ancient obsolete
25440 # capabilities has been moved to comments. Some all-numeric names of older
25441 # terminals have been retired.
25443 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
25444 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
25445 # used by BSD curses.
25447 # The 9.1.0 version of this file was translated from my lightly-edited copy of
25448 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
25449 # the purpose. Unless the ncurses tic implementation and the Lisp code were
25450 # making perfectly synchronized mistakes which I then failed to catch by
25451 # eyeball, the translation was correct and perfectly information-preserving.
25453 # Major version number bumps correspond to major version changes in ncurses.
25455 # Here is a log of the changes since then:
25457 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
25458 # * First terminfo master translated from 8.3.
25459 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
25460 # * Replaced Wyse entries with updated entries supplied by vendor.
25462 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
25463 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
25464 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
25465 # * Better XENIX keycap translation. Describe TC termcaps.
25466 # * Contact and history info supplied by Qume.
25467 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
25468 # * Raided the Shuford FTP site for recent termcaps/terminfos.
25469 # * Added information on X3.64 and VT100 standard escape sequences.
25470 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
25471 # * Added a correct X11R6 xterm entry.
25472 # * Fixed terminfo translations of padding.
25473 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
25474 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
25475 # * Added u6/u7/u8/u9 capabilities.
25476 # * Added PCVT entry.
25477 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
25478 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
25479 # to use reverse-video standout so Emacs will look right.
25480 # * Added el1 capability to ansi.
25481 # * Added smacs/rmacs to ansi.sys.
25483 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
25484 # * New mt70 entry.
25485 # * Added COPYRIGHTS AND OTHER DELUSIONS.
25486 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
25487 # smartvid & smarterm, ampex 175 & 219 & 232,
25488 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
25489 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
25490 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
25491 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
25492 # * Replaced the Perkin-Elmer entries with vendor's official ones.
25493 # * Restored the old minimal-ansi entry, luna needs it.
25494 # * Fixed some incorrect ip and proportional-padding translations.
25495 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
25496 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
25497 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
25498 # to force a particular height.
25499 # * Added beehive4 and reorganized other Harris entries.
25500 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
25501 # * Merged in DEC's official entries for its terminals. The only old
25502 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
25503 # * Replaced the translated BBN BitGraph entries with purpose-built
25504 # ones from AT&T's SVr3.
25505 # * Replaced the AT&T entries with AT&T's official terminfos.
25506 # * Added Teleray 16, vc415, cops10.
25507 # * Merged in many individual capabilities from SCO terminfo files.
25508 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
25510 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
25511 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
25512 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
25513 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
25514 # simterm, citoh and variants.
25515 # * Replaced sol entry with sol1 and sol2.
25516 # * Replaced Qume QVT and Freedom-series entries with purpose-built
25517 # terminfo entries.
25518 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
25519 # and dg200 entries using caps from from SCO.
25520 # * Added the usual set of function-key mappings to ANSI entry.
25521 # * Corrected xterm's function-key capabilities.
25522 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
25523 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
25524 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
25525 # * Fix in xterm entry, get the arrow keys right.
25526 # * Change some \0 escapes to \200.
25527 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
25528 # * Added apple (Videx card), adm1a, oadm31.
25529 # * Fixed malformed ampex csr.
25530 # * Fixed act4, cyb110; they had old-style prefix padding left in.
25531 # * Changed mandatory to advisory padding in many entries.
25532 # * Replaced HP entries up to hpsub with purpose-built ones.
25533 # * Blank rmir/smir/rmdc/smdc capabilities removed.
25534 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
25535 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
25536 # * Replaced the Ann Arbor entries with SCO's, the init strings are
25537 # more efficient (but the entries otherwise identical).
25538 # * Added dg211 from Shuford archive.
25539 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
25540 # adm42-nl, pc52, gs6300, xerox820, uts30.
25541 # * Pull SCO's padding into vi200 entry.
25542 # * Improved capabilities for tvi4107 and other TeleVideo and Viewpoint
25543 # entries merged in from SCO's descriptions.
25544 # * Fixed old-style prefix padding on zen50, h1500.
25545 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
25546 # entry from SCO's description.
25547 # * Reorganized the special entries.
25548 # * Added lm#0 to cbunix and virtual entries.
25550 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
25551 # * Restored cdc456tst.
25552 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
25553 # * Added megatek, beacon, microkit.
25554 # * Freeze for ncurses-1.9 release.
25555 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
25556 # * Added historical data for TAB.
25557 # * Comment fixes from David MacKenzie.
25558 # * Added the new BSDI pc3 entry.
25559 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
25560 # * A change in the tic -C logic now ensures that all entries in
25561 # the termcap translation will fit in < 1024 bytes.
25562 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
25563 # from GNU termcap file. This merges in all their local information.
25564 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
25565 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
25566 # * Added warnings about entries with long translations (restoring
25567 # all the GNU termcaps pushes a few over the edge).
25568 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
25569 # * Yet another tic change, and a couple of entry tweaks, to reduce the
25570 # number of long (> 1024) termcap translations back to 0.
25572 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
25573 # * Added kf13-kf20 to Linux entry.
25574 # * Regularize Prime terminal names.
25575 # * Historical data on Synertek.
25576 # * Freeze for ncurses-1.9.1.
25577 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
25578 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
25579 # * Eliminate whitespace in short name fields, this tanks some scripts.
25580 # * Name field changes to shorten some long entries.
25581 # * Termcap translation now automatically generates empty rmir/smir
25582 # when ich1/ich is present (copes with an ancient vi bug).
25583 # * Added `screen' entries from FSF's screen-3.6.2.
25584 # * Added linux-nic and xterm-nic entries.
25585 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
25586 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
25587 # eliminating some special-case code in ncurses.
25589 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
25590 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
25591 # that captures everything unique from it.
25592 # * Added reorder script generator.
25593 # * Freeze for ncurses 1.9.2 release.
25594 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
25595 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
25596 # * Added Olaf Siebert's corrections for adm12.
25597 # * ansi-pc-color now includes the colors and pairs caps, so that
25598 # entries which use it will inherit them automatically.
25599 # * The linux entry can now recognize the center (keypad 5) key.
25600 # * Removed some junk that found its way into Linux acsc.
25602 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
25603 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
25604 # * xterm doesn't try to use application keypad mode any more.
25605 # * Freeze for ncurses-1.9.3 release.
25606 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
25607 # * Added corrected sun entry from vendor.
25608 # * Added csr capability to linux entry.
25609 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
25610 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
25611 # * Some commented-out caps in long entries come back in, my code
25612 # for computing string-table lengths had a bug in it.
25613 # * pcansi series modified to fit comm-program reality better.
25614 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
25615 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
25616 # * Correct some bad aliases in the pcansi series
25617 # * Added entry for QNX console.
25618 # * Clean up duplicate long names for use with 4.4 library.
25619 # * Change vt100 standout to be normal reverse vide, not bright reverse;
25620 # this makes the Emacs status line look better.
25621 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
25622 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
25623 # * Minor surgery, mostly on name strings, to shorten termcap version.
25625 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
25626 # * Added dec-vt100 for use with the EWAN emulator.
25627 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
25628 # * Freeze for 1.9.5 alpha release.
25629 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
25630 # * Changed xterm lines to 24, the X11R6 default.
25631 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
25632 # * Added 7 newly discovered, undocumented acsc characters to linux
25633 # entry (the pryz{|} characters).
25634 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
25635 # * Correct two typos in the xterm entries introduced in 9.9.1.
25636 # * I finally figured out how to translate ko capabilities. Done.
25637 # * Added tvi921 entries from Tim Theisen.
25638 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
25639 # * Removed mystery tec entry, it was neither interesting nor useful.
25640 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
25641 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
25642 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
25643 # by making them relative to use capabilities
25644 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
25645 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
25646 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
25648 # * Translate all home=\E[;H capabilities to home=\E[H, they're
25650 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
25651 # vt100 and ANSI-like terminals.
25652 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
25653 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
25654 # does this now, too.
25655 # * fviewpoint is gone, it duplicated screwpoint.
25656 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
25657 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
25658 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
25659 # The UW vi50 replaces the old one, which becomes vi50adm,
25660 # * No more embedded commas in name fields.
25662 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
25663 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
25664 # * Introduced klone+* entries for describing Intel-console behavior.
25665 # * Linux kbs is default-mapped to delete for some brain-dead reason.
25666 # * -nsl -> -ns. The -pp syntax is obsolete.
25667 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
25668 # * Make xterm entry do application-keypad mode again. I got complaints
25669 # that it was messing up someone's 3270 emulator.
25670 # * Added some longname fields in order to avoid warning messages from
25671 # older tic implementations.
25672 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
25673 # it! (This gives us pi, greater than, less than, and a few more.)
25674 # * Freeze for ncurses-1.9.6 release.
25675 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
25676 # * Add xon to a number of console entries, they're memory-mapped and
25677 # don't need padding.
25678 # * Correct the use dependencies in the ansi series.
25679 # * Hand-translate more XENIX capabilities.
25680 # * Added hpterm entry for HP's X terminal emulator.
25681 # * Added aixterm entries.
25682 # * Shortened four names so everything fits in 14 chars.
25684 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
25685 # * Added ibcs2 entry and info on iBCS2 standard.
25686 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
25687 # * We can handle the HP meml/memu capability now.
25688 # * Added smacs to klone entries, just as documentation.
25689 # * Corrected ansi.sys and cit-500 entries.
25690 # * Added z39, vt320-k311, v220c, and avatar entries.
25691 # * Make pcansi use the ansi.sys invis capability.
25692 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
25693 # tvi925, tvi950, dt80, ncr7900i, h19.
25694 # * X3.64 has been withdrawn, change some references.
25695 # * Removed function keys from ansi-m entry.
25696 # * Corrected ansi.sys entry.
25697 # * Freeze for ncurses-1.9.7 release.
25698 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
25699 # * Added rmam/smam capabilities to many entries based on init strings.
25700 # * Added correct hpa/vpa to linux.
25701 # * Reduced several entries relative to vt52.
25702 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
25703 # * Exiled some utterly unidentifiable custom and homebrew types to the
25704 # UFO file; also, obsolete small-screen hardware; also, entries which
25705 # look flat-out incorrect, garbled, or redundant. These include the
25706 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
25707 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
25708 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
25709 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
25710 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
25711 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
25712 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
25713 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
25714 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
25715 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
25716 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
25717 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
25718 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
25719 # * Corrected pcvt25h as suggested by Brian C. Grayson
25720 # <bgrayson@pine.ece.utexas.edu>.
25721 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
25722 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
25723 # * Added kent=\EOM to xterm entry.
25725 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
25726 # * Corrected gigi entry.
25727 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
25728 # bad hpa/vpa capabilities.
25729 # * Corrected flash strings to have a uniform delay of .2 sec. No
25730 # more speed-dependent NUL-padding!
25731 # * terminfo capabilities in comments bracketed with <>.
25732 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
25733 # * Replaced pcvt with the 3.31 pcvt entries.
25734 # * Freeze for 1.9.7a.
25735 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
25736 # * Added emu entry from the X11R6 contrib tape sources.
25738 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
25739 # * Improved iris-ansi and sun entries.
25740 # * More flash string improvements.
25741 # * Corrected wy160 & wy160 as suggested by Robert Dunn
25742 # * Added dim to at386.
25743 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
25744 # he's ready to start using the termcap generated from this one.
25745 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
25746 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
25747 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
25748 # att610, att620, att630,
25749 # * Changed hazeltine name prefix from h to hz.
25750 # * Sent t500 to the UFI file.
25751 # * I think we've sucked all the juice out of BSDI's termcap file now.
25752 # * Freeze for ncurses 1.9.8 release
25753 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
25754 # * Unfreeze, linux kbs needed to be fixed.
25755 # * Tim Theisen pinned down a bug in the DMD firmware.
25756 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
25757 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
25758 # (The broken ones had been shadowed by sgr.)
25759 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
25760 # * Added documentation on ECMA-48 standard.
25761 # * New Amiga entry.
25762 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
25763 # * More ECMA-48 stuff
25764 # * Corrected typo in minix entry, added pc-minix.
25765 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
25766 # * Added rxvt entry.
25767 # * Added 1.3.x color-change capabilities to linux entry.
25768 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
25769 # * Corrected rxvt entry khome/kend.
25770 # * Corrected linux color change capabilities.
25771 # * NeXT entries from Dave Wetzel.
25772 # * Cleaned up if and rf file names (all in /usr/share now).
25773 # * Changed linux op capability to avoid screwing up a background color
25774 # pair set by setterm.
25775 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
25776 # * Added xterm-sun.
25777 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
25780 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
25781 # * Another sweep through the Shuford archive looking for new info.
25782 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
25783 # * Added st52 from Per Persson.
25784 # * Added eterm from the GNU Emacs 19.30 distribution.
25785 # * Freeze for 1.9.9.
25786 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
25787 # * FreeBSD console entries from Andrew Chernov.
25788 # * Removed duplicate Atari st52 name.
25789 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
25790 # * xterm doesn't actually have ACS_BLOCK.
25791 # * Change klone+color setf/setb to simpler forms that can be
25792 # translated into termcap.
25794 # * Removed mechanically-generated junk capabilities from cons* entries.
25795 # * Added color support to bsdos.
25796 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
25797 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
25798 # * Created ecma+color, linux can use it. Also added ech to linux.
25799 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
25800 # * Add descriptions to FreeBSD console entries. Also shorten
25801 # some aliases to <= 14 chars for portability.
25802 # * Added x68k console
25803 # * Added OTbs to several VT-series entries.
25804 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
25805 # * screen entry update for 3.7.1 from Michael Alan Dorman.
25806 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
25807 # * kterm correction due to Kenji Rikitake.
25808 # * ACS correction in vt320-kll due to Phillippe De Muyter.
25809 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
25810 # * Sun console entry correction from J.T. Conklin.
25811 # * Changed all DEC VT300 and up terminals to use VT300 tab set
25812 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
25813 # * Added smul to linux entry (we never noticed it was missing
25814 # because of sgr!).
25815 # * Added rmln to hp+labels (deduced from other HP entries).
25816 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
25817 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
25818 # * Corrected vt220 acsc.
25819 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
25820 # this corresponds to reality and helps prevent some tic warnings.
25821 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
25822 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
25823 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
25824 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
25825 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
25826 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
25827 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
25828 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
25829 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
25830 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
25831 # ifmr, v3220, wy100q, tandem653, ibmaed.
25832 # * Added DWK terminal description.
25833 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
25834 # * Many entries now have highlights inherited from adm+sgr.
25835 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
25836 # * xtitle and xtitle-twm enable access to the X status line.
25837 # * Added linux-1.3.6 color palette caps in conventional format.
25838 # * Added adm1178 terminal.
25839 # * Move fos and apollo terminals to obsolete category.
25840 # * Aha! The BRL terminals file told us what the Iris extensions mean.
25841 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
25842 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
25844 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
25845 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
25846 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
25847 # * Corrected, from BRL termcap file: vi50.
25848 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
25849 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
25850 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
25851 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
25852 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
25853 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
25854 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
25855 # * Paired-attribute fixes to various terminals.
25856 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
25857 # * xterm entry corrections from Thomas Dickey.
25858 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
25859 # * Added t916 entry, translated from a termcap in SCO's support area.
25860 # * New qnx entry from Michael Hunter.
25861 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
25862 # * Added hpex2 from Ville Sulko.
25863 # * Fixed a bug that ran the qnx and pcvtXX together.
25864 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
25865 # * Added dtterm entry from Solaris CDE.
25866 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
25867 # * corrected pairs#8 typo in dtterm entry.
25869 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
25870 # * updated xterm entry to cover 3.1.2E's new features.
25871 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
25872 # * Added new minix entry
25873 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
25874 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
25875 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
25876 # * Added Prism entries and kt7ix.
25877 # * Caution notes about EWAN and tabset files.
25878 # * Changed /usr/lib/tabset -> /usr/share/tabset.
25879 # * Added acsc/rmacs/smacs to vt52.
25880 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
25881 # * Merged in Thomas Dickey's reorganization of the xterm entries;
25882 # added technical corrections to avoid warning messages.
25883 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
25884 # * Added rmso=\E[27m in Linux entry.
25885 # * Added koi8-r support for Linux console.
25886 # * Replace xterm entries with canonical ones from XFree86 3.2.
25887 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
25888 # * Added color_xterm from Jacob Mandelson
25889 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
25890 # * Back off the xterm entry to use r6 as a base.
25891 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
25892 # * Added dec-vt220 at Adrian Garside's request.
25894 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
25896 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
25897 # * Minor corrections to xterm entries.
25898 # * Replaced EWAN telnet entry.
25899 # * Dropped the reorder script generator. It was a fossil.
25900 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25901 # * Replaced minitel-2 entry.
25902 # * Added MGR, ansi-nt.
25903 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25904 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25905 # the 4.4BSD Lite2 file.
25907 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
25908 # * Use setaf/setab consistently with SVr4.
25909 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
25910 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
25911 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
25912 # * add xterm-16color, for XFree86 3.3
25913 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
25914 # * correct typo in emu
25915 # * correct typo in vt102-w (Robert Wuest)
25916 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
25917 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
25918 # * remove ech capability from rxvt (it does the wrong thing)
25919 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
25920 # * remove spurious newlines from several entries (hp+color, wy50,
25921 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
25923 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
25924 # * correct rmso capability of wy50-mc
25925 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
25926 # * add cbt to xterm-xf86-v32
25927 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
25928 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
25929 # other capabilities not in xterm-r6.
25930 # * remove alternate character set from kterm entry.
25931 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
25932 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
25933 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
25934 # * add xterm-8bit entry.
25935 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
25936 # * repair several places where early version of tic replaced \, with \\\,
25937 # * make acsc entries canonical form (sorted, uniq).
25938 # * modify acsc entries for linux, linux-koi8
25939 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
25940 # * add color, mouse support to kterm.
25941 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
25942 # * correct wy120 smxon/tbc capabilities which were stuck together.
25943 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
25944 # * add entry for xterm-xf86-v39t
25945 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
25946 # * add u8,u9 to sun-il description
25947 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
25948 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
25950 # * add hds200 description (Walter Skorski)
25951 # * add EMX 0.9b descriptions
25952 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
25953 # * rename xhpterm back to hpterm.
25954 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
25955 # * change initc in linux-c-nc to use 0..1000 range.
25956 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
25957 # * remove hpa/vpa from rxvt, which implements them incorrectly.
25958 # * add sgr0 for rxvt.
25959 # * remove bogus smacs/rmacs from EMX descriptions.
25960 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
25961 # * revised entry for att7300
25962 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
25963 # * use \0 rather than \200.
25964 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
25965 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
25966 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
25967 # * rename xterm-xf86-v39t to xterm-xf86-v40
25968 # * remove bold/underline from sun console entries since they're not
25970 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
25971 # * add beterm entry (Fred Fish)
25972 # * add irix-color/xwsh entry.
25973 # * turn ncv off for linux.
25974 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
25975 # * set ncv for FreeBSD console (treat colors with reverse specially).
25976 # * remove sgr string from qnx based on report by Xiaodan Tang
25977 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
25978 # * remove spurious commas from descriptions
25979 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
25980 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
25981 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25982 # apparently based on cp-866).
25984 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
25986 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25987 # * Replaced minitel-2 entry.
25988 # * Added MGR, ansi-nt.
25989 # * Minor corrections to xterm entries.
25990 # * Replaced EWAN telnet entry.
25991 # * Dropped the reorder script generator. It was a fossil.
25992 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25993 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25994 # the 4.4BSD Lite2 file.
25995 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
25996 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
25997 # * Updated iris-ansi; corrected vt102-w.
25998 # * Switch base xterm entry to 3.3 level.
25999 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
26001 # * Removed rmir/smir from tv92B.
26003 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
26004 # * add hds200 description (Walter Skorski)
26005 # * add beterm entry (Fred Fish)
26006 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
26007 # iris-color entries.
26008 # * add emx entries.
26009 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
26010 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
26012 # * remove sgr string from qnx based on report by Xiaodan Tang
26013 # * Added u8/u9, removed rmul/smul from sun-il.
26014 # * 4.2 tic displays \0 rather than \200.
26015 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
26016 # apparently based on cp-866).
26017 # * Merged in Pavel Roskin's acsc for linux-koi8
26018 # * Corrected some erroneous \\'s to \.
26019 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
26020 # * II -> ii in pcvtXX, screen, xterm.
26021 # * Removed \n chars following ANSI escapes in sgr & friends.
26022 # * Updated Wyse entries.
26023 # * h19 corrections from Tim Pierce.
26024 # * Noted that the dm2500 has both ich and smir.
26025 # * added pccons for the Alpha under OSF/1.
26026 # * Added Sony NEWS workstation entries and cit101e-rv.
26027 # * Reverted `amiga'; to Kent Polk's version, as I'm told
26028 # the Verkuil entry messes up with Amiga Telnet.
26029 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
26030 # * Corrected attributions in 10.2.0 release notes.
26031 # * Scanned the Shuford archive for new terminfos and information.
26032 # * Removed sgr from qnx entry (Thomas Dickey).
26033 # * Added entries for ICL and Kokusai Data Systems terminals.
26034 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
26035 # * Incorporated att700 from the Boundless Technology FTP site.
26036 # * Miscellaneous contact-address and Web-page updates.
26038 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
26041 # * add nxterm and xterm-color terminfo description (request by Cristian
26042 # Gafton <gafton@redhat.com>).
26043 # * modify rxvt terminfo description to clear alternate screen before
26044 # switching back to normal screen, for compatibility with applications
26045 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
26046 # * modify linux terminfo description to reset color palette (reported
26047 # by Telford Tendys <telford@eng.uts.edu.au>).
26050 # * merge changes from current XFree86 xterm terminfo descriptions.
26053 # * Added minitel1 entries from Alexander Montaron.
26054 # * Added qnxt2 from Federico Bianchi.
26055 # * Added arm100 terminfo entries from Dave Millen.
26058 # * Added ncsa telnet entries from Francesco Potorti
26061 # * modify ncsa telnet entry to reflect color, other capabilities based on
26062 # examination of the source code - T.Dickey.
26065 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
26068 # * Added Francesco Potorti's tuned Wyse 99 entries.
26069 # * dtterm enacs correction from Alexander V. Lukyanov.
26070 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
26071 # * correct a typo in icl6404 entry.
26072 # * add xtermm and xtermc
26075 # * format most %'char' sequences to %{number}
26076 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
26077 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
26080 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
26081 # * correct initialization string in xterm-r5, add misc other features
26082 # to correspond with xterm patch #84 - TD
26085 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
26086 # * add Mathew Vernon's mach console entries
26087 # * corrections for ncsa function-keys (report by Larry Virden)
26090 # * change linux to use ncv#2, since underline does not work with color - TD
26093 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
26094 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
26095 # application modes, change kent to use the correct keypad code - TD
26098 # * add entry for Tera Term - TD
26101 # * minor improvements for teraterm entry - TD
26102 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
26103 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
26106 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
26107 # xterm and ncsa entries by removing the unneeded ones. Note that
26108 # some entries will return kend & khome versus kslt and kfnd, for
26109 # PC-style keyboards versus strict vt220 compatibility - TD
26112 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
26114 # * add 'crt' entry - TD
26115 # * correct typos in 'linux-c' entry - TD
26118 # * update entries for BSD/OS console to use klone+sgr and klone+color
26119 # (Jeffrey C Honig)
26122 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
26125 # * add linux-lat, from RedHat patches to ncurses 4.2
26128 # * add complete set of default function-key definitions for scoansi - TD.
26131 # * add cnorm, cvvis for Linux 2.2 kernels
26134 # * add kmous to xterm-r5 -TD
26135 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
26136 # parent "use" clause -TD
26139 # * corrected cnorm, added el1 in 'screen' description -TD
26142 # * add ms-vt100 -TD
26145 # * corrections to beterm entry -TD
26148 # * add cygwin entry -TD
26151 # * minor corrections for beterm entry -TD
26154 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
26157 # * add amiga-8bit entry
26158 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
26159 # rcons-color, based on
26160 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
26161 # * add alias for iris-ansi-net
26164 # * corrected scoansi entry's acsc, some function keys, add color -TD
26167 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
26168 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
26169 # key mapping, leaving Potorti's entries more like he named them -TD
26170 # * remove enter/exit am-mode from cygwin -TD
26173 # * correct typos in several entries (missing '[' from CSI):
26174 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
26175 # strings for avt-ns -TD
26176 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
26179 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
26180 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
26181 # * add xterm-88color and xterm-256color -TD
26184 # * add "obsolete" termcap strings -TD
26185 # * add kvt and gnome entries -TD
26188 # * correct cup string for regent100 -TD
26191 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
26192 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
26193 # * change OTrs capabilities to rs2 -TD
26194 # * add obsolete and extended capabilities to 'screen' -TD
26197 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
26199 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
26200 # and adding kcbt -TD
26203 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
26204 # nonstandard resource settings -TD
26207 # * minor fixes for xterm-*, based on Debian #58530 -TD
26210 # * add several terminal types from esr's "11.0", as well as comments.
26211 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
26212 # vt220-8bit, vt220-old, wy85-8bit
26215 # * add several terminal types from esr's "11.0.1" (ansi-*).
26216 # * update OTxx capabilities for changes on 2000/3/4.
26217 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
26220 # * move screen's AX extension to ecma+color, modify several entries to
26221 # use that, adjusting ncv as needed -TD
26224 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
26225 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
26226 # in esr's version.
26229 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
26230 # * correct color definition for ibm3164, make minor changes to other
26231 # IBM terminal definitions based on recent terminfo descriptions -TD
26234 # * add mgterm, from NetBSD -TD
26235 # * add alias sun-cgsix for sun-ss5 as per NetBSD
26236 # * change cons25w to use rs2 for reset rather than rs1 -TD
26237 # * add rc/sc to aixterm based on manpage -TD
26240 # * remove ncv from xterm-16color, xterm-256color
26243 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
26246 # * add Eterm (Michael Jennings)
26249 # * add amiga-vnc entry.
26252 # * correct description of Top Gun Telnet.
26253 # * add kterm-color
26256 # * add qansi* entries from QNX ftp site.
26259 # * add Matrix Orbital entries by Eric Z. Ayers).
26260 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
26264 # * add S0, E0 extensions to screen's entry -TD
26267 # * several corrections based on tic's new parameter-checking code -TD
26268 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
26269 # bracketing sequences that reset video attributes (\E8 would restore
26273 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
26276 # * improved scoansi, based on SCO man-page, and testing console,
26277 # scoterm with tack -TD
26280 # * modify kterm to use acsc via SCS controls.
26283 # * screen 3.9.8 allows xterm mouse controls to pass-through
26286 # * remove spurious "%|" from some xterm entries.
26289 # * modify 'screen' khome/kend to match screen 3.09.08
26290 # * add examples of 'screen' customization (screen.xterm-xfree86,
26291 # screen.xterm-r6, screen.teraterm) -TD
26294 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
26295 # * add "Apple_Terminal" entries -Benjamin Sittler
26296 # * remove time-delays from "Apple_Terminal" entries -TD
26297 # * make sgr entries time-delays consistent with individual caps -TD
26300 # * corrected/updated screen.xterm-xfree86
26303 # * ELKS descriptions, from Federico Bianchi
26304 # * add u6 (CSR) to Eterm (Michael Jennings).
26307 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
26308 # tic which handles names no longer than 14 characters. Add
26309 # corresponding descriptions for the Darwin PowerPC console named
26310 # "xnuppc" -Benjamin Sittler
26313 # * change kbs in mach entries to ^? (Marcus Brinkmann).
26316 # * add "putty" entry -TD
26317 # * updated "Apple_Terminal" entries -Benjamin Sittler
26320 # * add ms-vt100-color entry -TD
26321 # * add "konsole" entries -TD
26324 # * update gnome entry to Redhat 7.2 -TD
26327 # * add kf13-kf48 strings to cons25w -TD
26328 # * add pcvt25-color entry -TD
26329 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
26330 # * improve some features of scoansi entry based on SCO's version -TD
26331 # * add scoansi-new entry corresponding to OpenServer 5.0.6
26334 # * add kcbt to screen entry -TD
26337 # * add rxvt-16color, ibm+16color, mvterm entries -TD
26340 # * split out linux-basic entry, making linux-c inherit from that, and
26341 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
26342 # the history of this console type -TD
26343 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
26344 # r/g/b parameters of initc are in the range 0 to 1000 -TD
26347 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
26350 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
26351 # in the latter -TD
26354 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
26355 # * ncr260wy350pp has only 16 color pairs -TD
26356 # * add sun-type4 from NetBSD -TD
26357 # * update xterm-xfree86 to current (xterm patch #170) -TD
26358 # * add screen-bce, screen-s entries -TD
26359 # * add xterm-1002, xterm-1003 entries -TD
26362 # * update homepage for Top Gun Telnet/SSH
26365 # * reduce duplication in emx entries, added emx-base -TD
26368 # * corrected acs for screen.teraterm -TD
26369 # * add tkterm entry -TD
26372 # * cygwin changes from Charles Wilson:
26373 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
26374 # primary instead of nxterm, to match XFree86's xterm.terminfo
26375 # usage and to prevent circular links.
26376 # (rxvt): add additional codes from rxvt.org.
26377 # (rxvt-color): new alias
26378 # (rxvt-xpm): new alias
26379 # (rxvt-cygwin): like rxvt, but with special acsc codes.
26380 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
26381 # with a "native" MSWin GUI. Each takes different acsc codes,
26382 # which are both different from the "normal" rxvt's acsc.
26383 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
26384 # (cygwinDBG): ditto.
26387 # * update gnome terminal entries -TD
26390 # * add entries for djgpp 2.03 and 2.04 -TD
26393 # * add alias for vtnt -TD
26394 # * update xterm-xfree86 for XFree86 4.4 -TD
26397 # * add linux-vt (Andrey V Lukyanov)
26400 # * add screen.linux -TD
26403 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
26406 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
26407 # * add vt100+ and vt-utf8 entries -TD
26408 # * add uwin entry -TD
26411 # * add sgr strings to several common entries lacking them, e.g.,
26412 # screen, to make the entries more portable -TD
26413 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
26414 # * similar fixups for cvvis/cnorm various entries -TD
26417 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
26421 # * add xterm-xf86-v44 -TD
26422 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
26423 # on G1 being used via an ISO-2022 escape sequence (report by
26424 # Juliusz Chroboczek) -TD
26425 # * add 'hurd' entry -TD
26428 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
26430 # * align with xterm #192's use of xterm-new -TD
26431 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
26432 # * make xterm-new the default "xterm" -TD
26435 # * minor fixes for emu -TD
26437 # * add rmam/smam to linux (Trevor Van Bremen)
26438 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
26439 # * fixes for avatar0 -TD
26440 # * fixes for vp3a+ -TD
26443 # * add xterm-pc-fkeys -TD
26444 # * review/update gnome and gnome-rh90 entries (prompted by
26445 # Redhat Bugzilla #122815) -TD
26446 # * review/update konsole entries -TD
26447 # * add sgr, correct sgr0 for kterm and mlterm -TD
26448 # * correct tsl string in kterm -TD
26451 # * make ncsa-m rmacs/smacs consistent with sgr -TD
26452 # * add sgr, rc/sc and ech to syscons entries -TD
26453 # * add function-keys to decansi -TD
26454 # * add sgr to mterm-ansi -TD
26455 # * add sgr, civis, cnorm to emu -TD
26456 # * correct/simplify cup in addrinfo -TD
26457 # * corrections for gnome and konsole entries
26458 # (Redhat Bugzilla #122815) -Hans de Goede
26459 # * modify DEC entries (vt220, etc), to add sgr string, and to use
26460 # ISO-2022 strings for rmacs/smacs -TD
26463 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
26466 # * improved putty entry -Robert de Bath
26469 # * remove dch/dch1 from rxvt because they are implemented inconsistently
26470 # with the common usage of bce/ech -TD
26471 # * remove khome from vt220 (vt220's have no home key) -TD
26472 # * add rxvt+pcfkeys -TD
26475 # * modify several entries to ensure xterm mouse and cursor visibility
26476 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
26477 # Eterm, screen. (The xterm entries are left alone - old ones for
26478 # compatibility, and the new ones do not require this change) -TD
26481 # * add morphos entry -Pavel Fedin
26482 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
26483 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
26486 # * update wsvt25 entry -TD
26489 # * update pairs for xterm-88color and xterm-256color to reflect the
26490 # ncurses extended-color support -TD
26493 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
26494 # * add aixterm-16color to demonstrate 16-color capability -TD
26497 # * add media-copy to vt100 -TD
26498 # * corrected acsc string for vt52 -TD
26501 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
26503 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
26506 # * re-corrected acsc string for vt52 -TD
26509 # * corrected sun-il sgr string which referred to bold and underline -TD
26510 # * add sun-color entry -TD
26513 # * modify sgr0 in several entries to reset alternate-charset as in the
26515 # * modify sgr string of prism9 to better match the individual
26519 # * correct order of use= in rxvt-basic -TD
26522 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
26525 # * other minor fixes to cygwin based on tack -TD
26526 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
26529 # * add nsterm-16color entry -TD
26530 # * remove ncv flag from xterm-16color -TD
26531 # * remove setf/setb from xterm-256color to match xterm #209 -TD
26532 # * update mlterm entry to 2.9.2 -TD
26535 # * fixes to make nsterm-16color match report
26536 # by Christian Ebert -Alain Bench
26539 # * add xterm+256color building block -TD
26540 # * add gnome-256color, putty-256color, rxvt-256color -TD
26543 # * add hpterm-color -TD
26546 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
26547 # * add gnome-fc5 (prompted by GenToo #122566) -TD
26548 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
26549 # * improve xterm-256color by combining the ibm+16color setaf/setab
26550 # strings with SGR 48. The setf/setb strings also are cancelled here
26551 # rather than omitted so derived entries will cancel those also -Alain
26555 # * add some notes regarding copyright to terminfo.src -TD
26556 # * use rxvt+pcfkeys in Eterm -TD
26557 # * remove km and flash from gnome, Eterm and rxvt since they do not work
26558 # as one would expect (km sends ESC rather than setting the 8th bit
26560 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
26561 # * add konsole-solaris -TD
26564 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
26565 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
26566 # * modify xterm-24 to inherit from "xterm" -TD
26567 # * add xiterm entry -TD
26568 # * add putty-vt100 entry -TD
26569 # * corrected spelling of Michael A Dorman's name, prompted by
26570 # http://www.advogato.org/person/mdorman/diary.html -TD
26573 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
26574 # * update xterm+pcfkeys to match xterm #216 -TD
26577 # * make descriptions of xterm entries consistent with its terminfo -TD
26580 # * add xfce, mgt -TD
26583 # * correct acsc string in kterm -TD
26586 # * add kon entry -TD
26587 # * remove invis from linux and related entries, add klone+sgr8 for those
26588 # that implement the feature (or have not been shown to lack it) -TD
26591 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
26592 # * minor improvements to rxvt+pcfkeys -TD
26595 # * fix a few typos in if/then/else expressions -TD
26598 # * add several GNU Screen variations with 16- and 256-colors, and
26599 # status line (Alain Bench).
26602 # * add Newbury Data entries (Jean-Charles Billaud).
26605 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
26608 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
26609 # * add konsole-256color entry -TD
26612 # * add 9term entry (request by Juhapekka Tolvanen) -TD
26615 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
26616 # * add shift-control- and control-modified keys for rxvt editing
26618 # * update mlterm entry to 2.9.3 -TD
26619 # * add mlterm+pcfkeys -TD
26622 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
26623 # xterm+pcc0, etc., to make the corresponding building blocks reflect
26624 # xterm's capabilities -TD
26625 # * add mrxvt entry -TD
26626 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
26629 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
26632 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
26633 # xterm starting with xterm patch #216 -TD
26634 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
26635 # to match xterm #230 -TD
26636 # * extend xterm+pccX entries to match xterm #230 -TD
26637 # * add xterm+app, xterm+noapp, from xterm #230 -TD
26638 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
26641 # * add screen.rxvt -TD
26644 # * add screen+fkeys (prompted by Debian #478094) -TD
26647 # * add screen.mlterm -TD
26648 # * improve mlterm and mlterm+pcfkeys -TD
26651 # * add Eterm-256color, Eterm-88color -TD
26652 # * add rxvt-88color -TD
26655 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
26656 # original to teraterm2.3 -TD
26657 # * update "gnome" to 2.22.3 -TD
26658 # * update "konsole" to 1.6.6 -TD
26659 # * add "aterm" -TD
26660 # * add "linux2.6.26" -TD
26663 # * change several \E[2g (clear tab at current column) to \E[3g
26664 # (clear all tabs) to match definition for tbc capability -TD
26667 # * add eterm-color -TD
26670 # * add screen.Eterm -TD
26673 # * correct typo in pfkey of ansi.sys-old
26674 # (report by Kalle Olavi Niemitalo)
26675 # * move function- and cursor-keys from emx-base to ansi.sys, and create
26676 # a pfkey capability which handles F1-F48 -TD
26679 # * add vwmterm entry (Bryan Christ)
26682 # * change ncv and op capabilities in sun-color to match Sun's entry for
26683 # this (report by Laszlo Peter)
26684 # * improve interix smso by using reverse rather than bold (report by
26685 # Kristof Zelechovski).
26688 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
26689 # * add linux-16color (Benjamin Sittler)
26690 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
26691 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
26692 # * add ccc and initc capabilities to xterm-16color -TD
26695 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
26698 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
26701 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
26702 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
26705 # * add bterm (bogl 0.1.18) -TD
26706 # * minor fix to rxvt+pcfkeys -TD
26709 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
26712 # * add several screen-bce.XXX entries -TD
26715 # * modify screen-bce.XXX entries to exclude ech, since screen's color
26716 # model does not clear with color for that feature -TD
26719 # * rename atari and st52 to atari-old, st52-old, use newer entries from
26720 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
26723 # * add mlterm-256color entry -TD
26726 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
26727 # the alternate character set (patch by Nicholas Marriott)
26730 # * improve acsc for vt52 (Benjamin Sittler)
26731 # * modify nsterm entries for consistent sgr/sgr0 -TD
26732 # * modify xnuppc entries for consistent sgr/sgr0 -TD
26733 # * add invis to tek4115 sgr -TD
26736 # * reformat acsc strings to canonical format -TD
26739 # * add "XT" capability to entries for terminals that support both
26740 # xterm-style mouse- and title-controls, for "screen" which
26741 # special-cases TERM beginning with "xterm" or "rxvt" -TD
26744 # * fill in no-parameter forms of cursor-movement where a parameterized
26745 # form is available -TD
26746 # * fill in missing cursor controls where the form of the controls is
26748 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
26751 # * correct comparison used for setting 16-colors in linux-16color
26752 # entry (Novell #644831) -TD
26753 # * improve linux-16color entry, using "dim" for color-8 which makes it
26754 # gray rather than black like color-0 -TD
26757 # * make "vte" the principal entry defining "gnome", since GNOME terminal
26758 # is merely one of several terminals whose behavior is provided by this
26762 # * fix typo in rmso for tek4106 -Goran Weinholt
26765 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
26766 # * also suppress ncv in konsole-base -TD
26769 # * add U8 feature to denote entries for terminal emulators which do not
26770 # support VT100 SI/SO when processing UTF-8 encoding -TD
26771 # * add xterm-utf8 as a demo of the U8 feature -TD
26774 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
26777 # * update minix entry to minix 3.2 (Thomas Cort).
26780 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
26781 # * remove a backslash which continued comment, obscuring altos3
26782 # definition with OpenBSD toolset (Nicholas Marriott).
26785 # * add/use xterm+tmux chunk from xterm #271 -TD
26786 # * resync xterm-new entry from xterm #271 -TD
26787 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
26788 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
26789 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
26792 # * add kich1 to sun (Yuri Pankov)
26793 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
26796 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
26799 # * minor cleanup of X-terminal emulator section -TD
26800 # * add terminator entry -TD
26801 # * add simpleterm entry -TD
26804 # * add xterm+kbs fragment from xterm #272 -TD
26807 # * add pccon entries for OpenBSD console (Alexei Malinin)
26810 # * corrected old changelog comments -TD
26813 # * add putty-sco -TD
26816 # * add mach-gnu (Samuel Thibault)
26817 # * add mach-gnu-color, tweaks to mach-gnu -TD
26818 # * make sgr for sun-color agree with smso -TD
26819 # * make sgr for prism9 agree with other caps -TD
26820 # * make sgr for icl6404 agree with other caps -TD
26821 # * make sgr for ofcons agree with other caps -TD
26822 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
26823 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
26824 # * make sgr for avt-ns agree with other caps -TD
26827 # * make sgr for xterm-pcolor agree with other caps -TD
26828 # * make sgr for att5425 agree with other caps -TD
26829 # * make sgr for att630 agree with other caps -TD
26830 # * make sgr for linux entries agree with other caps -TD
26831 # * make sgr for tvi9065 agree with other caps -TD
26832 # * make sgr for ncr260vt200an agree with other caps -TD
26833 # * make sgr for ncr160vt100pp agree with other caps -TD
26834 # * make sgr for ncr260vt300an agree with other caps -TD
26835 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
26836 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
26839 # * correct order of use-clauses in st-256color -TD
26842 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
26845 # * document all of the user-defined capabilities in one place -TD
26846 # * add XT to some places to improve usefulness for other applications
26847 # than screen, which would like to pretend that xterm's title is
26848 # a status-line. -TD
26849 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
26850 # of ordering and overrides -TD
26853 # * add msgr to vt420, similar DEC vtXXX entries -TD
26854 # * add several missing vt420 capabilities from vt220 -TD
26855 # * factor out ansi+pp from several entries -TD
26856 # * change xterm+sl and xterm+sl-twm to include only the status-line
26857 # capabilities and not "use=xterm", making them more generally useful
26858 # as building-blocks -TD
26859 # * add dec+sl building block, as example -TD
26862 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
26863 # * add eslok flag to dec+sl -TD
26864 # * dec+sl applies to vt320 and up -TD
26865 # * drop wsl width from xterm+sl -TD
26866 # * reuse xterm+sl in putty and nsca-m -TD
26867 # * add ansi+tabs to vt520 -TD
26868 # * add ansi+enq to vt220-vt520 -TD
26871 # * remove p6 (bold) from opus3n1+ for consistency -TD
26872 # * remove acs stuff from env230 per clues in Ingres termcap -TD
26873 # * modify env230 sgr/sgr0 to match other capabilities -TD
26874 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
26875 # * make sgr for dku7202 agree with other caps -TD
26876 # * make sgr for ibmpc agree with other caps -TD
26877 # * make sgr for tek4107 agree with other caps -TD
26878 # * make sgr for ndr9500 agree with other caps -TD
26879 # * make sgr for sco-ansi agree with other caps -TD
26880 # * make sgr for d410 agree with other caps -TD
26881 # * make sgr for d210 agree with other caps -TD
26882 # * make sgr for d470c, d470c-7b agree with other caps -TD
26885 # * rewrite vt520 entry based on vt420 -TD
26886 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
26889 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
26890 # analysis by Martin Husemann).
26891 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
26892 # Onno van der Linden).
26893 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
26894 # * add kdch1, etc., to qvt108 -TD
26895 # * add dl1/il1 to some entries based on dl/il values -TD
26896 # * add dl to simpleterm -TD
26899 # * modify some older xterm entries to align with xterm source -TD
26900 # * separate "xterm-old" alias from "xterm-r6" -TD
26903 # * add E3 to xterm-basic and putty -TD
26906 # * add nsterm-256color, make this the default nsterm -TD
26907 # * remove bw from nsterm-bce, per testing with tack -TD
26910 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
26911 # (patch by Christian Persch).
26914 # * reviewed vte-2012, reverted most of the change since it was incorrect
26915 # based on testing with tack -TD
26916 # * un-cancel the initc in vte-256color, since this was implemented
26917 # starting with version 0.20 in 2009 -TD
26920 # * correct typo in sgr string for sun-color,
26921 # add bold for consistency with sgr,
26922 # change smso for consistency with sgr -TD
26923 # * correct typo in sgr string for terminator -TD
26924 # * add blink to the attributes masked by ncv in linux-16color (report
26925 # by Benjamin Sittler)
26928 # * change initialization for vt220, similar entries for consistency
26929 # with cursor-key strings (NetBSD #47674) -TD
26930 # * further improvements to linux-16color (Benjamin Sittler)
26933 # * move nsterm-related entries out of "obsolete" section to more
26934 # plausible "ansi consoles" -TD
26935 # * additional cleanup of table-of-contents by reordering -TD
26938 # * added note to clarify Terminal.app's non-emulation of the various
26939 # terminal types listed in the preferences dialog -TD
26942 # * use TS extension to describe xterm's title-escapes -TD
26943 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
26944 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
26945 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
26946 # (Debian #727119).
26947 # * simplify pfkey expression in ansi.sys -TD
26950 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
26953 # * updated notes for wsvt25 based on tack and vttest -TD
26954 # * add teken entry to show actual properties of FreeBSD's "xterm"
26958 # * add terminology entry -TD
26959 # * add mlterm3 entry, use that as "mlterm" -TD
26960 # * inherit mlterm-256color from mlterm -TD
26963 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
26966 # * cancel ccc in putty-256color and konsole-256color for consistency
26967 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
26968 # * add xterm+256setaf building block for various terminals which only
26969 # get the 256-color feature half-implemented -TD
26970 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
26974 # * add vt520ansi (Mike Gran)
26977 # * correct several entries which had termcap-style padding used in
26978 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
26979 # * correct syntax for padding in some entries: dg211, h19 -TD
26980 # * correct ti924-8 which had confused padding versus octal escapes -TD
26981 # * correct padding in sbi entry -TD
26984 # * update xterm-new to xterm patch #305 -TD
26985 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
26986 # (italic). This was a long-ago typo in screen 3.1.1 which was
26987 # overlooked until a few terminal emulators implemented the feature -TD
26990 # > fix regression in screen terminfo entries (reports by Christian
26991 # Ebert, Gabriele Balducci) -TD
26992 # + revert the change to screen; see notes for why this did not work -TD
26993 # + cancel sitm/ritm for entries which extend "screen", to work around
26994 # screen's hardcoded behavior for SGR 3 -TD
26997 # + modify sgr for screen.xterm-new to support dim capability -TD
26998 # + add dim capability to nsterm+7 -TD
26999 # + cancel dim capability for iterm -TD
27000 # + add dim, invis capabilities to vte-2012 -TD
27001 # + add sitm/ritm to konsole-base and mlterm3 -TD
27004 # + add xterm-1005 and xterm-1006 entries, with suggested extension
27005 # capability "xm" -TD
27008 # + update test-report for mrxvt -TD
27011 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
27014 # + reviewed terminology 0.6.1, add function key definitions. None of
27015 # the vt100-compatibility issues were improved -TD
27018 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
27019 # + add several key definitions to nsterm-bce to match preconfigured
27020 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
27023 # + remove unnecessary ';' from E3 capabilities -TD
27024 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
27025 # + split-out recent change to nsterm-bce as nsterm-build326, and add
27026 # nsterm-build342 to reflect changes with successive releases of OSX
27027 # (discussion with Leonardo B Schenkel)
27028 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
27032 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
27033 # + add several screen.XXX entries to support the respective variations
27034 # for 256 colors -TD
27037 # + add putty+fnkeys* building-block entries -TD
27040 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
27041 # + add vte-2014, update vte to use that -TD
27044 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
27045 # from xterm-new (report by Richard Birkett) -TD
27048 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
27049 # + fixes for st 0.5 from testing with tack -TD
27052 # + updated minitel entries to fix kel problem with emacs, and add
27053 # minitel1b-nb (Alexandre Montaron).
27054 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
27055 # + replace some dead URLs in commands with equivalents from the
27056 # Internet Archive -TD
27059 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
27060 # + add keys f12-f124 to pccon+keys (Tati Chevron).
27063 # + fix some inconsistencies in the pccon* entries -TD
27066 # + add viewdata (Alexandre Montaron).
27069 # + tidy up comments about hardcoded 256color palette (report by
27070 # Leonardo Brondani Schenkel) -TD
27071 # + add putty-noapp entry, and amend putty entry to use application mode
27072 # for better consistency with xterm (report by Leonardo Brondani
27076 # + add 'oc' capability to xterm+256color, allowing palette reset for
27080 # + modify linux2.6 entry to improve line-drawing -TD
27081 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
27084 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
27085 # reset palette using "oc" string as in linux -TD
27088 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
27089 # that could be returned -TD
27090 # + added a few capabilities fixed in recent vte -TD
27093 # + correct a typo in interix -TD
27096 # + updated minitel entries to use status line with screen(1), as well as
27097 # printing special G2 videotex chars like french accentuated glyph
27098 # using special cap XC= (patch by Alexandre Montaron).
27101 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
27102 # + correct rs2 string for vt100-nam -TD
27105 # + modify linux-16color to not mask dim, standout or reverse with the
27106 # ncv capability -TD
27107 # + add 0.1sec mandatory delay to flash capabilities using the VT100
27108 # reverse-video control -TD
27109 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
27110 # entry, to avoid conflict with the user-defined mapping. The reset
27111 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
27114 # + merge current st description (report by Harry Gindi) -TD
27117 # + modify flash capability for linux and wyse entries to put the delay
27118 # between the reverse/normal escapes rather than after -TD
27121 # + minor comment-fixes to help automate links to bug-urls -TD
27122 # + add dvtm, dvtm-256color -TD
27123 # + add settings corresponding to xterm-keys option to tmux entry to
27124 # reflect upcoming change to make that option "on" by default
27125 # (patch by Nicholas Marriott).
27126 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
27127 # + add dumb-emacs-ansi -TD
27130 # + correct a few spelling errors in comments -TD
27134 # + add vt100+4bsd building block, use that for older terminals rather
27135 # than "vt100" which is now mostly used as a building block for
27136 # terminal emulators -TD
27137 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
27138 # (report/analysis by Robert King) -TD
27141 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
27142 # + add smso for env230, to match sgr -TD
27143 # + remove p7/protect from sgr in fbterm -TD
27144 # + drop setf/setb from fbterm; setaf/setab are enough -TD
27145 # + make xterm-pcolor sgr consistent with other capabilities -TD
27146 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
27147 # (discussion with Nicholas Marriott)
27150 # + correct missing comma-separator between string capabilities in
27151 # icl6402 and m2-nam -TD
27152 # + update formatting with ncurses 6.0.20170422 -TD
27153 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
27154 # add alias ansiterm (report by Robert King).
27157 # + reformatted using hexadecimal numbers to improve readability -TD
27160 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
27161 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
27162 # + add "rep" to xterm-new, available since 1997/01/26 -TD
27163 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
27167 # + update "iterm" entry -TD
27168 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
27171 # + update notes on user-defined capabilities -TD
27174 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
27177 # + add "op" to xterm+256setaf -TD
27178 # + reviewed terminology 1.0.0 -TD
27179 # + reviewed st 0.7 -TD
27182 # + modify old terminology entry and a few other terminal emulators to
27183 # account for xon -TD
27184 # + correct sgr string for tmux, which used screen's "standout" code
27185 # rather than the standard code (patch by Roman Kagan)
27186 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
27187 # those correspond to the non-sgr settings where they differ, but
27188 # otherwise use ECMA-48 consistently:
27189 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
27190 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
27191 # st-0.7, vi603, vwmterm -TD
27194 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
27195 # blocks from xterm #331 -TD
27196 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
27198 # + modify xterm+256color and xterm+256setaf to use correct number of
27199 # color pairs, for ncurses 6.1 -TD
27200 # + add rs1 capability to xterm-256color -TD
27201 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
27202 # match xterm #272, reflecting packager's changes -TD
27203 # + remove "boolean" Se, Ss from st-0.7 -TD
27206 # + add konsole-direct and st-direct -TD
27207 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
27208 # direct-colors are wanted -TD
27211 # + add vte-direct -TD
27212 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
27216 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
27217 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
27218 # mode does not work with those programs. konsole is debatable -TD
27219 # + add "termite" entry (report by Markus Pfeiffer) -TD
27222 # + trim "XT" from screen entry -TD
27223 # + modify iterm to use xterm+sl-twm building block -TD
27224 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
27225 # konsole's removal in 2008 -TD
27226 # + expanded the history section of konsole to explain its flawed
27227 # imitation of xterm's keyboard -TD
27228 # + use xterm+x11mouse in screen.* entries because screen does not yet
27229 # support xterm's 1006 mode -TD
27230 # + add nsterm-build400 for macOS 10.13 -TD
27231 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
27232 # + update vte to vte-2017 -TD
27233 # + add ecma+strikeout to vte-2017 -TD
27234 # + add iterm2-direct -TD
27235 # + updated teraterm, added teraterm-256color -TD
27236 # + add mlterm-direct -TD
27237 # + add descriptions for ANSI building-blocks -TD
27240 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
27241 # + fix remaining flash capabilities with trailing mandatory delays -TD
27244 # + trim some redundant capabilities from st-0.7 -TD
27245 # + trim unnecessary setf/setb from interix -TD
27248 # + trim spurious whitespace from tmux in 2018-02-24 changes;
27249 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
27250 # (report by C Anthony Risinger)
27251 # + improve iterm2 using some xterm features which it has adapted -TD
27254 # + add acsc string to vi200 (Nibby Nebbulous)
27255 # add right/down-arrow to vi200's acsc -TD
27258 # + corrected acsc for wy50 -TD
27259 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
27260 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
27263 # + fix typo in tvi955 -TD
27264 # + corrected acsc for regent60 -TD
27265 # + add alias n7900 -TD
27268 # + corrected acsc for tvi950 -TD
27269 # + remove bogus kf0 from tvi950 -TD
27270 # + added function-key definitions to agree with TeleVideo 950 manual -TD
27271 # + add bel to tvi950 -TD
27272 # + add shifted function-keys to regent60 -TD
27273 # + renumber regent40 function-keys to match manual -TD
27274 # + add cd (clr_eos) to adds200 -TD
27277 # + add OpenGL clients alacritty and kitty -TD
27278 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
27281 # + fix a typo in comments (Aaron Gyes).
27282 # + add nsterm-build309 to replace nsterm-256color, assigning the latter
27283 # as an alias of nsterm, to make mouse work with nsterm-256color -TD
27284 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD
27287 # + add nsterm-direct -TD
27288 # + use SGR 1006 mouse for konsole-base -TD
27289 # + use SGR 1006 mouse for putty -TD
27290 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
27293 # + fix typo in adds200 -TD
27296 # + add "screen5", to mention italics (report by Stefan Assmann)
27297 # + modify description of xterm+x11hilite to eliminate unused p5 -TD
27300 # + update xterm-new to xterm patch #345 -TD
27301 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
27302 # + update terminator entry -TD
27303 # + remove hard-tabs from ti703 (report by Robert Clausecker)
27304 # + add Smol/Rmol for mintty, vte-2018 -Nicholas Marriott
27307 # + add rs1 to konsole, mlterm -TD
27310 # + add mintty, mintty-direct (Thomas Wolff)
27312 # + comment-out some user-defined capabilities in mintty+common to allow
27313 # builds with existing releases 5.9-6.1 -TD
27316 # + add ms-terminal -TD
27317 # + add vscode, vscode-direct -TD
27318 # + use ecma+index in screen, st -TD
27321 # + add domterm -TD
27322 # + improve comments for recent changes, add alias xterm.js -TD
27325 # + amend the change to screen, because tmux relies upon that entry
27326 # and does not support that feature (Debian #933572) -TD
27327 # + updated ms-terminal entry & notes -TD
27328 # + updated kitty entry & notes -TD
27329 # + updated alacritty+common entry & notes -TD
27330 # + use xterm+sl-twm for consistency -TD
27333 # + correct a comment -TD
27336 # + modify linux-16color to accommodate Linux console driver change in
27337 # early 2018 (report by Dino Petrucci).
27340 # + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
27343 # + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
27344 # with old non-curses programs -TD
27345 # + reviewed st 0.8.2, updated some details -TD
27346 # + use ansi+rep several places -TD
27349 # + update alacritty entries for 0.4.0 (prompted by patch by
27350 # Christian Duerr) -TD
27353 # + spelling fixes per codespell -TD
27354 # + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD
27357 # + improve vt50h and vt52 based on DECScope manual -TD
27358 # + add/use vt52+keypad and vt52-basic -TD
27361 # + use vt52+keypad in xterm-vt52, from xterm #354 -TD
27364 # + use vt100+fnkeys in putty -TD
27367 # + add details on the change to Linux SGR 21 in 2018 -TD
27368 # + add xterm-direct16 and xterm-direct256 -TD
27371 # + fix some dead URLs -TD
27374 # + update notes on vscode / xterm.js -TD
27377 # + re-enable "bel" in konsole-base (report by Nia Huang)
27378 # + add linux-s entry (patch by Alexandre Montaron).
27381 # + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage
27382 # in xterm+256color, xterm+88color -TD
27383 # + add shifted Linux console keys in linux+sfkeys entry for
27384 # screen.linux (report by Alexandre Montaron).
27385 # + use vt100+enq in screen (report by Alexandre Montaron).
27386 # + add screen.linux-s alias (suggested by Alexandre Montaron).
27389 # + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo
27393 # + correct icl6404 csr (report by Florian Weimer).
27394 # + correct ti916 cup (report by Florian Weimer).
27395 # + improve ndr9500 (report by Florian Weimer).
27398 # + correct description of vt330/vt340 (Ross Combs).
27401 # + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch).
27404 # + add tmux-direct (tmux #2370)
27405 # + simplify mlterm initialization with DECSTR -TD
27406 # + change tmux's kbs to ^? (report by Premysl Eric Janouch)
27409 # + correct sgr in aaa+rv (report by Florian Weimer) -TD
27410 # + fix some sgr inconsistencies in d230c, ibm6153, ibm6154,
27414 # + expanded notes about tek4107 -TD
27417 # + update kitty+common -TD
27418 # + add putty+screen and putty-screen (suggested by Alexandre Montaron).
27421 # + add Smulx to alacritty (Christian Duerr).
27422 # + add rep to PuTTY -TD
27423 # + add putty+keypad -TD
27426 # + correct mlterm3 kf1-kf4 (Debian #975322) -TD
27427 # + add flash to mlterm3 -TD
27430 # + update terminology to 1.8.1 -TD
27433 # + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS
27434 # (report by Patrick McDermott) -TD
27437 # + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD
27438 # + add vt220-base, for terminal emulators which generally have not
27439 # supported att610's blinking cursor control -TD
27440 # + use vt220+cvis in vt220, etc -TD
27441 # + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD
27442 # + use vt220+cvis in st, terminology, termite since they ignore
27443 # blinking-cursor detail in att610+cvis -TD
27446 # + add/use vt220+pcedit and vt220+vtedit -TD
27447 # + add scrt/securecrt and absolute -TD
27448 # + add nel to xterm-new, though supported since X11R5 -TD
27449 # + add/use xterm+nofkeys -TD
27450 # + move use of ecma+italics from xterm-basic to xterm+nofkeys -TD
27453 # + remove a duplicate "use" in xterm-vt220 -TD
27456 # + correct use-ordering in some xterm-direct flavors -TD
27459 # + add hterm, hterm-256color (Mike Frysinger)
27462 # + use default colors in pccon "op" -TD
27463 # + correct rmacs/smacs in aaa+dec, aaa+rv -TD
27464 # + add hpterm-color2 and hp98550-color (Martin Trusler)
27467 # + correct typo in "vip" comments (report by Nick Black), reviewed this
27468 # against Glink manual -TD
27469 # + fill in some missing pieces for pccon, to make it comparable to the
27473 # + trim "flash" from pccon+base -TD
27474 # + revert change for aaa+rv -TD
27475 # + add workaround for Windows Terminal's problems with CR/LF mapping to
27476 # ms-terminal (patch by Juergen Pfeifer).
27477 # + review/update current Windows Terminal vs ms-terminal -TD
27480 # + add extensions in xterm+tmux and ecma+strikeout to ms-terminal,
27481 # but cancel the non-working Cr and Ms capabilities -TD
27482 # + add foot and foot-direct -TD
27485 # + fix missing "%d" for setaf/setab code 8-15 in xterm+direct16 (report
27486 # by Florian Weimer) -TD
27489 # + corrected tsl capability for terminator -TD
27492 # + modify linux3.0 entry to reflect default mapping of shift-tab by
27493 # kbd 1.14 (report by Jan Engelhardt) -TD
27496 # + add testing note for xterm-{hp|sco|sun} -TD
27497 # + corrected description for ansi.sys-old -TD
27498 # + add xterm+nopcfkeys, to fill in keys for xterm-hp, xterm-sun -TD
27499 # + use hp+arrows in a few places -TD
27500 # + use hp+pfk-cr in a few places -TD
27503 # + add kbeg to xterm+keypad to accommodate termcap applications -TD
27504 # + add smglp and smgrp to vt420+lrmm, to provide useful data for the
27505 # "tabs" +m option -TD
27508 # + fill in some details for infoton -TD
27509 # + fix spelling/consistency in several descriptions -TD
27510 # + use vt420+lrmm in vt420 -TD
27513 # + trim some redundant definitions -TD
27516 # + add xterm+sl-alt, use that in foot+base (report by Jonas Grosse
27520 # + add dim, ecma+strikeout to st-0.6 -TD
27523 # + fix errata in description fields (report by Eric Lindblad) -TD
27524 # + add x10term+sl, aixterm+sl, ncr260vp+sl, ncr260vp+vt, wyse+sl -TD
27527 # + update kitty -TD
27530 # + add xterm+acs building-block -TD
27531 # + add xterm-p370, for use in older terminals -TD
27532 # + add dec+sl to xterm-new, per patch #371 -TD
27533 # + add mosh and mosh-256color -TD
27537 # + correct setal in mintty/tmux entries, add to vte-2018 (report by
27539 # + add blink to vte-2018 (report by Robert Lange)
27542 # + update teken -TD
27543 # + add teken-16color, teken-vt and teken-sc -TD
27544 # + add a few missing details for vte-2018 (report by Robert Lange) -TD
27547 # + make description-fields distinct -TD
27550 # + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and
27551 # also provide for focus in/out responses -TD
27554 # + expanded notes for teken/syscons -TD
27557 # + remove u6-u9 from teken-2018 -TD
27558 # + set "xterm-new" to "xterm-p370", add "xterm-p371" -TD
27560 ######## SHANTIH! SHANTIH! SHANTIH!