1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2017/01/28 23:50:28 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
375 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
376 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
378 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
380 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The normal (ANSI) flavor of "media copy" building block asserts that
385 # characters sent to the printer do not echo on the screen. DEC terminals
386 # can also be put into autoprinter mode, where each line is sent to the
387 # printer as you move off that line, e.g., by a carriage return.
388 ansi+pp|ansi printer port,
390 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
391 dec+pp|DEC autoprinter mode,
392 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
394 # The IBM PC alternate character set. Plug this into any Intel console entry.
395 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
396 # ROM graphics for control characters such as the diamond, up- and down-arrow.
397 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
398 # will work with any Intel console, they all seem to have inherited \E[11m
399 # from the ANSI.SYS de-facto standard.
400 klone+acs|alternate character set for ansi.sys displays,
401 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
402 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
403 \301w\302x\263y\363z\362{\343|\330}\234~\376,
404 rmacs=\E[10m, smacs=\E[11m,
406 # Highlight controls corresponding to the ANSI.SYS standard. Most
407 # console drivers for Intel boxes obey these. Makes the same assumption
408 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
409 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
410 klone+sgr|attribute control for ansi.sys displays,
411 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
412 rmso=\E[m, rmul=\E[m,
413 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
415 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
418 # Most Intel boxes do not treat "invis" (invisible) text.
419 klone+sgr8|attribute control for ansi.sys displays,
421 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
422 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
425 # Highlight controls corresponding to the ANSI.SYS standard. *All*
426 # console drivers for Intel boxes obey these. Does not assume \E[11m will
427 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
428 # diamond and arrow characters under curses.
429 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
430 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
432 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
433 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
434 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
437 # KOI8-R (RFC1489) acs (alternate character set)
438 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
439 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
440 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
441 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
442 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
444 rmacs=\E[10m, smacs=\E[11m,
446 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
447 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
448 # but equivalent strings that don't rely on that coincidence:
449 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
450 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
451 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
452 # They match a subset of ECMA-48.
453 klone+color|color control for ansi.sys and ISO6429-compatible displays,
454 colors#8, ncv#3, pairs#64,
455 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
457 # This is better than klone+color, it doesn't assume white-on-black as the
458 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
459 ecma+color|color control for ECMA-48-compatible terminals,
461 colors#8, ncv#3, pairs#64,
462 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
464 # Attribute control for ECMA-48-compatible terminals
465 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
466 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
468 # For comparison, here are all the capabilities implied by the Intel
469 # Binary Compatibility Standard (level 2) that fit within terminfo.
470 # For more detail on this rather pathetic standard, see the comments
471 # near the end of this file.
472 ibcs2|Intel Binary Compatibility Standard prescriptions,
473 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
474 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
476 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
477 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
478 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
479 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
482 #### ANSI/ECMA-48 terminals and terminal emulators
484 # See near the end of this file for details on ANSI conformance.
485 # Don't mess with these entries! Lots of other entries depend on them!
487 # This section lists entries in a least-capable to most-capable order.
488 # if you're in doubt about what `ANSI' matches yours, try them in that
489 # order and back off from the first that breaks.
491 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
492 # and more than one page of memory. It uses local motions instead of
493 # direct cursor addressing, and makes almost no assumptions. It does
494 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
495 ansi-mr|mem rel cup ansi,
497 cols#80, lines#24, use=vanilla, use=ansi+erase,
500 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
501 # beware of screen size problems and memory relative cursor addressing.
502 ansi-mini|any ansi terminal with pessimistic assumptions,
504 cols#80, lines#24, use=vanilla, use=ansi+cup,
507 # ansi-mtabs adds relative addressing and minimal tab support
508 ansi-mtabs|any ansi terminal with pessimistic assumptions,
510 ht=^I, use=ansi-mini, use=ansi+local1,
512 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
514 # The following is an entry for the full ANSI 3.64 (1977). It lacks
515 # padding, but most terminals using the standard are "fast" enough
516 # not to require any -- even at 9600 bps. If you encounter problems,
517 # try including the padding specifications.
519 # Note: the :as: and :ae: specifications are not implemented here, for
520 # the available termcap documentation does not make clear WHICH alternate
521 # character set to specify. ANSI 3.64 seems to make allowances for several.
522 # Please make the appropriate adjustments to fit your needs -- that is
523 # if you will be using alternate character sets.
525 # There are very few terminals running the full ANSI 3.64 standard,
526 # so I could only test this entry on one verified terminal (Visual 102).
527 # I would appreciate the results on other terminals sent to me.
529 # Please report comments, changes, and problems to:
531 # U.S. MAIL: Hugh Hansard
534 # Atlanta, GA. 30322.
536 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
538 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
539 ansi77|ansi 3.64 standard 1977 version,
541 cols#80, it#8, lines#24,
542 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
543 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
544 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
545 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
546 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
547 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
548 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
549 smso=\E[7m, smul=\E[4m,
551 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
552 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
553 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
554 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
555 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
556 # to confuse many emulators. On the other hand, we can count on these programs
557 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
558 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
559 # ANSI.SYS influence.
560 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
561 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
563 cols#80, it#8, lines#24,
564 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
565 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
566 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
567 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
568 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
570 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
571 lines#25, use=pcansi-m,
572 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
573 lines#33, use=pcansi-m,
574 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
575 lines#43, use=pcansi-m,
576 # The color versions. All PC emulators do color...
577 pcansi|ibm-pc terminal programs claiming to be ansi,
578 use=klone+color, use=pcansi-m,
579 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
580 lines#25, use=pcansi,
581 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
582 lines#33, use=pcansi,
583 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
584 lines#43, use=pcansi,
586 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
587 # If you want pound signs rather than dollars, replace `B' with `A'
588 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
589 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
590 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
592 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
593 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
594 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
595 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
596 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
597 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
598 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
599 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
600 vpa=\E[%i%p1%dd, use=pcansi-m,
602 ansi+enq|ncurses extension for ANSI ENQ,
603 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
606 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
607 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
608 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
609 ansi|ansi/pc-term compatible with color,
610 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
612 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
613 # all the normal ANSI stuff with no extensions. It assumes
614 # insert/delete line/char is there, so it won't work with
615 # vt100 clones. It assumes video attributes for bold, blink,
616 # underline, and reverse, which won't matter much if the terminal
617 # can't do some of those. Padding is assumed to be zero, which
618 # shouldn't hurt since xon/xoff is assumed.
619 ansi-generic|generic ansi standard terminal,
621 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
622 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
623 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
624 use=ansi+sgrbold, use=ansi+arrows,
626 #### DOS ANSI.SYS variants
628 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
629 # documentation (except for the keyboard key reassignment feature, which
630 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
631 # though undocumented. The <pfkey> capability is untested but should work for
632 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
633 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
634 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
635 OTbs, am, mir, msgr, xon,
637 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
638 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
639 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
640 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
641 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
642 u7=\E[6n, use=klone+color, use=klone+sgr8,
644 # Keypad: Home=\0G Up=\0H PrPag=\0I
645 # ka1,kh kcuu1 kpp,ka3
647 # Left=\0K 5=\0L Right=\0M
650 # End=\0O Down=\0P NxPag=\0Q
651 # kc1,kend kcud1 kc3,knp
656 # On keyboard with 12 function keys,
657 # shifted f-keys: F13-F24
658 # control f-keys: F25-F36
659 # alt f-keys: F37-F48
660 # The shift/control/alt keys do not modify each other, but alt overrides both,
661 # and control overrides shift.
663 # <pfkey> capability for F1-F48 -TD
664 ansi.sys|ANSI.SYS 3.1 and later versions,
665 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
666 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
667 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
668 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
669 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
670 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
671 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
672 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
673 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
674 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
675 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
676 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
677 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
678 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
679 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
683 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
684 # This should only be used when the terminal emulator cannot redefine the keys.
685 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
686 # definitions must be restored. If the terminal emulator is quit while in vi
687 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
688 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
689 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
690 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
691 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
692 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
693 # Consequently the End keypad key could not be set (it is relatively safe and
694 # actually useful because it sends ^@ O, which beeps and opens a line above).
695 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
696 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
697 \svi\s9-29-86\n\E[;75;8p,
698 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
699 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
700 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
701 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
704 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
705 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
706 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
707 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
710 # See ansi.sysk and nansi.sys above.
711 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
712 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
713 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
714 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
717 #### Atari ST terminals
719 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
721 tw52|tw52-color|Toswin window manager with color,
723 colors#16, pairs#256,
724 oc=\Eb?\Ec0, op=\Eb?\Ec0,
725 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
727 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
729 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
731 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
734 tw52-m|Toswin window manager monochrome,
737 bold=\Eya, dch1=\Ea, dim=\EyB,
738 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
739 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
740 smso=\EyQ, smul=\EyH, use=at-m,
741 tt52|Atari TT medium and high resolution,
742 lines#30, use=at-color,
743 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
745 colors#16, pairs#256,
746 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
747 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
748 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
749 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
750 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
752 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
753 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
754 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
755 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
757 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
758 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
759 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
760 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
762 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
763 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
764 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
765 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
768 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
770 cols#80, it#8, lines#24,
771 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
772 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
773 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
774 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
775 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
776 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
777 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
778 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
779 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
780 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
781 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
782 tw100|toswin vt100 window mgr,
784 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
785 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
787 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
788 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
789 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
790 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
791 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
792 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
793 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
794 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
795 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
796 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
797 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
798 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
799 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
800 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
801 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
802 rmso=\E[m, rmul=\E[m,
803 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
805 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
806 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
808 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
809 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
811 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
812 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
813 # The entries for stv52 and stv52pc probably need a revision.
814 stv52|MiNT virtual console,
816 cols#80, it#8, lines#30,
817 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
818 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
819 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
820 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
821 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
822 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
823 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
824 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
825 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
826 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
827 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
828 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
829 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
830 stv52pc|MiNT virtual console with PC charset,
832 cols#80, it#8, lines#30,
833 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
834 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
835 \363z\362{\343|\366}\234~\371,
836 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
837 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
838 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
839 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
840 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
841 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
842 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
843 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
844 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
845 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
846 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
847 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
850 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
853 cols#80, it#8, lines#25,
854 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
855 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
856 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
857 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
858 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
859 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
860 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
862 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
863 # MiNT VT52 emulation. 80 columns, 25 rows.
864 # MiNT is Now TOS, the operating system which comes with all Ataris now
865 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
866 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
867 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
868 st52-old|Atari ST with VT52 emulation,
871 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
872 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
873 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
874 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
875 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
876 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
877 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
878 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
879 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
882 #### Apple Terminal.app
884 # nsterm*|Apple_Terminal - AppKit Terminal.app
886 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
887 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
888 # Server and Mac OS X operating systems. There is also a
889 # "terminal.app" in GNUStep, but I believe it to be an unrelated
890 # codebase and I have not attempted to describe it here.
892 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
893 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
894 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
895 # version supports color.
897 # To determine the version of Terminal.app you're using by running:
899 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
901 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
903 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
905 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
907 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
909 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
911 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
912 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
913 # might work too, but really you're on your own here since these
914 # systems are very obsolete and I can't test them. I do welcome
915 # patches, though :).
919 # For GNUstep_Terminal, you're probably best off using "linux" or
920 # writing your own terminfo.
922 # For MacTelnet, you're on your own. It's a different codebase, and
923 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
925 # For iTerm.app, see "iterm".
928 # The AppKit Terminal.app descriptions all have names beginning with
929 # "nsterm". Note that the statusline (-s) versions use the window
930 # titlebar as a phony status line, and may produce warnings during
931 # compilation as a result ("tsl uses 0 parameters, expected 1".)
932 # Ignore these warnings, or even ignore these entries entirely. Apps
933 # which need to position the cursor or do other fancy stuff inside the
934 # status line won't work with these entries. They're primarily useful
935 # for programs like Pine which provide simple notifications in the
936 # status line. Please note that non-ASCII characters don't work right
937 # in the status line, since Terminal.app incorrectly interprets their
938 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
939 # versions) or only accepts status lines consisting entirely of
940 # characters from the first 256 Unicode positions (including C1 but
943 # The Mythology* of AppKit Terminal.app:
945 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
946 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
947 # shareware replacement for Terminal called "Stuart" which NeXT bought
948 # and used as the basis for the Terminal.app in NeXTstep 2+,
949 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
950 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
951 # capabilities for the early versions, but I believe that the
952 # TERM_PROGRAM_VERSION may have been reset at some point.
954 # The early versions were tailored to the NeXT character set. Sometime
955 # after the Apple aquisition the encoding was swiched to MacRoman
956 # (initally with serious altcharset bugs due to incomplete conversion
957 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
958 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
959 # 8-color support (initially buggy when combined with attributes, but
960 # that was later fixed.) More recently, around Mac OS X version 10.3
961 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
962 # some versions (for instance 133-1 which shipped with Mac OS X
963 # version 10.4) this suffered from the <bce> bug, but that seems to
964 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
966 # In the early days of Mac OS X the terminal was fairly buggy and
967 # would routinely crash under load. Many of these bugs seem to have
968 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
969 # some may still remain. This change seems to correspond to
970 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
973 # * This may correspond with what actually happened, but I don't
974 # know. It is based on guesswork, hearsay, private correspondence,
975 # my faulty memory, and the following online sources and references:
977 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
978 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
980 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
981 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
983 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
984 # "nsterm" to comply with the name length and case conventions and
985 # limitations of various software packages [notably Solaris terminfo
986 # and UNIX.] A single Apple_Terminal alias is retained for
987 # backwards-compatbility.
989 # * Added function key support (F1-F4). These only work in Terminal.app
990 # version 51, hopefully the capabilities won't cause problems for people
993 # * Added "full color" (-c) entries which support the 16-color mode in
996 # * By default, version 51 uses UTF-8 encoding with broken altcharset
997 # support, so "ASCII" (-7) entries without altcharset support were
1000 # nsterm - AppKit Terminal.app
1002 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1003 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1004 # extensions. This terminfo was written to describe versions 41
1005 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1006 # version 10.1) of Terminal.app.
1008 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1009 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1010 # use, the executable for Terminal.app is:
1011 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1013 # If you're looking for a description of the full-screen system
1014 # console which runs under Apple's Darwin operating system on PowerPC
1015 # platforms, see the "xnuppc" entry instead.
1017 # There were no function keys in version 41. In version 51, there are
1018 # four working function keys (F1, F2, F3 and F4.) The function keys
1019 # are included in all of these entries.
1021 # It does not support mouse pointer position reporting. Under some
1022 # circumstances the cursor can be positioned using option-click; this
1023 # works by comparing the cursor position and the selected position,
1024 # and simulating enough cursor-key presses to move the cursor to the
1025 # selected position. This technique fails in all but the simplest
1028 # It provides partial ANSI color support (background colors interacted
1029 # badly with bold in version 41, though, as reflected in :ncv:.) The
1030 # monochrome (-m) entries are useful if you've disabled color support
1031 # or use a monochrome monitor. The full color (-c) entries are useful
1032 # in version 51, which doesn't exhibit the background color bug. They
1033 # also enable an xterm-compatible 16-color mode.
1035 # The configurable titlebar is set using xterm-compatible sequences;
1036 # it is used as a status bar in the statusline (-s) entries. Its width
1037 # depends on font sizes and window sizes, but 50 characters seems to
1038 # be the default for an 80x24 window.
1040 # The MacRoman character encoding is used for some of the alternate
1041 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1042 # disable alternate character set support entirely, and the "VT100"
1043 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1044 # graphics emulation, which seems to think the character encoding is
1045 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1046 # are useful in Terminal.app version 51, which supports UTF-8 and
1047 # other ASCII-compatible character encodings but does not correctly
1048 # implement VT100 graphics; once VT100 graphics are correctly
1049 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1050 # usable in any ASCII-compatible character encoding [except perhaps
1051 # in UTF-8, where some experts argue for disallowing alternate
1052 # characters entirely.]
1054 # Terminal.app reports "vt100" as the terminal type, but exports
1055 # several environment variables which may aid detection in a shell
1056 # profile (i.e. .profile or .login):
1059 # TERM_PROGRAM=Apple_Terminal
1060 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1061 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1063 # For example, the following Bourne shell script would detect the
1064 # correct terminal type:
1066 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1069 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1077 # In a C shell derivative, this would be accomplished by:
1079 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1080 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1081 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1082 # setenv TERM "nsterm-old"
1084 # setenv TERM "nsterm-c-7"
1089 # The '+' entries are building blocks
1090 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1091 am, bw, msgr, xenl, xon,
1092 cols#80, it#8, lines#24,
1093 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1094 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1095 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1096 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1097 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1098 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1099 ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1100 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1101 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1102 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1103 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1104 %p5%t;2%;%?%p7%t;8%;m,
1105 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1106 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1108 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1109 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1110 enacs=\E(B\E)0, rmacs=^O,
1111 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1112 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1113 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1115 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1116 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1117 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1118 \271|\255}\243~\245,
1119 enacs=\E(B\E)0, rmacs=^O,
1120 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1121 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1122 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1124 # compare with xterm+sl-twm
1125 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1126 wsl#50, use=xterm+sl-twm,
1128 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1129 op=\E[0m, use=ibm+16color,
1131 nsterm+c41|AppKit Terminal.app v41 color support,
1132 colors#8, ncv#37, pairs#64,
1133 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1135 # These are different combinations of the building blocks
1137 # ASCII charset (-7)
1138 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1141 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1142 use=nsterm+s, use=nsterm+7,
1144 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1145 use=nsterm+c41, use=nsterm+7,
1147 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1148 use=nsterm+c, use=nsterm+7,
1150 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1151 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1153 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1154 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1156 # VT100 alternate-charset (-acs)
1157 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1160 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1161 use=nsterm+s, use=nsterm+acs,
1163 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1164 use=nsterm+c41, use=nsterm+acs,
1166 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1167 use=nsterm+c, use=nsterm+acs,
1169 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1170 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1172 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1173 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1176 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1179 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1180 use=nsterm+s, use=nsterm+mac,
1182 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1183 use=nsterm+c41, use=nsterm+mac,
1185 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1186 use=nsterm+c, use=nsterm+mac,
1188 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1189 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1191 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1192 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1194 # In Mac OS X version 10.5 the format of the preferences has changed
1195 # and a new, more complex technique is needed, e.g.,
1197 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1198 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1199 # ud.init();prefs=ud.persistentDomainForName_(
1200 # "com.apple.Terminal");prefs["Window Settings"][
1201 # prefs["Default Window Settings"]]["TerminalType"
1202 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1203 # "com.apple.Terminal")' nsterm-16color
1205 # and it is still not settable from the preferences dialog. This is
1206 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1207 # in Apple's bug reporter.
1209 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1210 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1211 # vt52, vt100, vt102 and xterm.
1212 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1214 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1215 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1216 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1217 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1218 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1219 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1220 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1221 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1222 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1223 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1225 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1226 # the background color erase feature. The newer version 240.2 in Mac OS X
1227 # version 10.5 does not.
1229 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1230 # and D P Schreber comparing to nsterm-c-s-acs.
1232 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1233 # can be set in Terminal.app, e.g.,
1235 # defaults write com.apple.Terminal TermCapString nsterm-bce
1237 # and that it is not set in Terminal's preferences dialog.
1239 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1242 # * The terminal description matches the default settings.
1243 # * The keyboard is configurable via a dialog.
1244 # * By default khome, kend, knext and kprev are honored only with a
1246 # * There are bindings for control left/right arrow (but not up/down).
1247 # Added those to nsterm-16color, which is the version used for OS X 10.6
1248 # * "Allow VT100 application keypage mode" is by default disabled.
1249 # There is no way to press keypad-comma unless application mode is enabled
1251 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1252 # * CHT, REP, SU, SD are buggy.
1253 # * ECH works (also in Leopard), but is not used here for compatibility.
1254 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1255 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1256 # nsterm entry from this file to override the MacPorts (20110404) or
1257 # system (20081102) copy of this file.
1258 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1259 # dialog defaults to xterm-256color. Alternative selections are ansi,
1260 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1261 # the menu says "Declare terminal as" without promising to actually emulate
1262 # the corresponding terminals. Indeed, changing TERM does not affect the
1263 # emulation itself. This means that
1264 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1266 # + the color model is the same for each setting of TERM (does not match
1268 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1269 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1270 # + the vt52 emulation does not give a usable shell because screen-clearing
1271 # does not work as expected.
1272 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1273 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1274 # as well as unmasking F10 (which had been used in the window manager). Those
1275 # keys are listed in this entry.
1276 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1277 bce, use=nsterm-16color,
1279 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1280 # TERM_PROGRAM_VERSION=309
1281 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1282 # TERM_PROGRAM_VERSION=303
1283 nsterm-256color|Terminal.app in OS X 10.8,
1284 use=xterm+256setaf, use=nsterm-bce,
1286 nsterm-build326|Terminal.app in OS X 10.9,
1287 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1288 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1289 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1290 use=nsterm-256color,
1293 nsterm-build343|Terminal.app in OS X 10.10,
1294 kend=\EOF, khome=\EOH, use=nsterm-build326,
1296 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1298 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1299 # + f1-f4 map to pf1-pf4
1300 # + no vt220 support aside from DECTCEM and ECH
1301 # + there are no protected areas. Forget about anything above vt220.
1302 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1303 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1304 # + but bce fails for 11.6.7.2 (test repeat).
1305 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1306 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1307 # + normal (not X10 or Highlight tracking) mouse now works.
1308 # + mouse any-event works
1309 # + mouse button-event works
1310 # + in alternate screen:
1312 # mode 1047 fails to restore cursor position (do not use)
1313 # mode 1049 fails to restore screen contents (do not use)
1314 # + dtterm window-modify operations work (some messages are not printed)
1315 # + dtterm window-report gives size of window in characters/pixels as
1316 # well as state of window.
1318 # + there is no difference between cnorm/cvvis
1319 # + has dim/invis/blink (no protect of course)
1320 # + most function keys with shift/control modifiers give beep
1321 # (user can configure, but out-of-the-box is what I record)
1322 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1324 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1325 # + kLFT/kRIT work, but not up/down with shift-modifier
1326 # + there are a few predefined bindings with Alt, but no clear pattern.
1327 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1328 # Using ncurses test-program with xterm-new:
1330 # Using xterm's scripts:
1331 # + palette for 256-colors is hardcoded.
1332 # + no support for "dynamic colors"
1333 # + no support for tcap-query.
1334 nsterm-build361|Terminal.app in OS X 10.11,
1335 kmous=\E[M, use=nsterm-build343,
1337 # This is an alias which should always point to the "current" version
1338 nsterm|Apple_Terminal|AppKit Terminal.app,
1339 use=nsterm-build361,
1341 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1342 # more featureful) terminal emulator for Mac OS X. It is similar
1343 # enough in capabilities to nsterm-16color that I have derived this
1344 # description from that one, but as far as I know they share no code.
1345 # Many of the features are user-configurable, but I attempt only to
1346 # describe the default configuration.
1348 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1350 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1352 csr@, dim@, kend=\EOF, khome=\EOH,
1353 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1354 %p7%t;8%;m%?%p9%t\016%e\017%;,
1355 use=xterm+256setaf, use=nsterm-16color,
1357 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1359 # On PowerPC platforms, Apple's Darwin operating system uses a
1360 # full-screen system console derived from a NetBSD framebuffer
1361 # console. It is an ANSI-style terminal, and is not really VT-100
1364 # Under Mac OS X, this is the system console driver used while in
1365 # single-user mode [reachable by holding down Command-S during the
1366 # boot process] and when logged in using console mode [reachable by
1367 # typing ">console" at the graphical login prompt.]
1369 # If you're looking for a description of the Terminal.app terminal
1370 # emulator which runs under the Mac OS X Quartz windowing system (and
1371 # other AppKit-supported windowing systems,) see the "nsterm"
1374 # NOTE: Under Mac OS X version 10.1, the default login window does not
1375 # prompt for user name, instead requiring an icon to be selected from
1376 # a list of known users. Since the special ">console" login is not in
1377 # this list, you must make one of two changes in the Login Window
1378 # panel of the Login section of System Prefs to make the special
1379 # ">console" login accessible. The first option is to enable 'Show
1380 # "Other User" in list for network users', which will add a special
1381 # "Other..." icon to the graphical login panel. Selecting "Other..."
1382 # will present the regular graphical login prompt. The second option
1383 # is to change the 'Display Login Window as:' setting to 'Name and
1384 # password entry fields', which replaces the login panel with a
1385 # graphical login prompt.
1387 # There are no function keys, at least not in Darwin 1.3.
1389 # It has no mouse support.
1391 # It has full ANSI color support, and color combines correctly with
1392 # all three supported attributes: bold, inverse-video and underline.
1393 # However, bold colored text is almost unreadable (bolding is
1394 # accomplished using shifting and or-ing, and looks smeared) so bold
1395 # has been excluded from the list of color-compatible attributes
1396 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1397 # monochrome monitor.
1399 # There is one serious bug with this terminal emulation's color
1400 # support: repositioning the cursor onto a cell with non-matching
1401 # colors obliterates that cell's contents, replacing it with a blank
1402 # and displaying a colored cursor in the "current" colors. There is
1403 # no complete workaround at present [other than using the monochrome
1404 # (-m) entries,] but removing the (msgr) capability seemed to help.
1406 # The "standout" chosen was simple reverse-video, although a colorful
1407 # standout might be more aesthetically pleasing. Similarly, the bold
1408 # chosen is the terminal's own smeared bold, although a simple
1409 # color-change might be more readable. The color-bold (-b) entries
1410 # uses magenta colored text for bolding instead. The fancy color (-f
1411 # and -f2) entries use color for bold, standout and underlined text
1412 # (underlined text is still underlined, though.)
1414 # Apparently the terminal emulator does support a VT-100-style
1415 # alternate character set, but all the alternate character set
1416 # positions have been left blank in the font. For this reason, no
1417 # alternate character set capabilities have been included in this
1418 # description. The console driver appears to be ASCII-only, so (enacs)
1419 # has been excluded [although the VT-100 sequence does work.]
1421 # The default Mac OS X and Darwin installation reports "vt100" as the
1422 # terminal type, and exports no helpful environment variables. To fix
1423 # this, change the "console" entry in /etc/ttys from "vt100" to
1424 # "xnuppc-WxH", where W and H are the character dimensions of your
1425 # console (see below.)
1427 # The font used by the terminal emulator is apparently one originally
1428 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1429 # file includes descriptions for the following geometries:
1431 # Pixels Characters Entry Name (append -m for monochrome)
1432 # -------------------------------------------------------------------
1433 # 640x400 80x25 xnuppc-80x25
1434 # 640x480 80x30 xnuppc-80x30
1435 # 720x480 90x30 xnuppc-90x30
1436 # 800x600 100x37 xnuppc-100x37
1437 # 896x600 112x37 xnuppc-112x37
1438 # 1024x640 128x40 xnuppc-128x40
1439 # 1024x768 128x48 xnuppc-128x48
1440 # 1152x768 144x48 xnuppc-144x48
1441 # 1280x1024 160x64 xnuppc-160x64
1442 # 1600x1024 200x64 xnuppc-200x64
1443 # 1600x1200 200x75 xnuppc-200x75
1444 # 2048x1536 256x96 xnuppc-256x96
1446 # The basic "xnuppc" entry includes no size information, and the
1447 # emulator includes no reporting capability, so you'll be at the mercy
1448 # of the TTY device (which reports incorrectly on my hardware.) The
1449 # color-bold entries do not include size information.
1451 # The '+' entries are building blocks
1452 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1455 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1456 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1457 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1458 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1459 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1460 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1461 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1462 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1464 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1465 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1466 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1468 xnuppc+c|Darwin PowerPC Console ANSI color support,
1469 colors#8, ncv#32, pairs#64,
1470 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1472 xnuppc+b|Darwin PowerPC Console color-bold support,
1475 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1478 xnuppc+f|Darwin PowerPC Console fancy color support,
1480 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1482 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1484 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1487 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1488 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1490 # Building blocks for specific screen sizes
1491 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1494 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1497 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1500 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1503 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1506 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1509 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1512 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1515 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1518 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1521 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1524 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1527 # These are different combinations of the building blocks
1529 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1532 xnuppc|darwin|Darwin PowerPC Console (color),
1533 use=xnuppc+c, use=xnuppc+basic,
1535 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1538 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1539 use=xnuppc+b, use=xnuppc+c,
1541 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1544 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1545 use=xnuppc+f, use=xnuppc+c,
1547 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1550 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1551 use=xnuppc+f2, use=xnuppc+c,
1553 # Combinations for specific screen sizes
1554 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1555 use=xnuppc+80x25, use=xnuppc+basic,
1557 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1558 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1560 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1561 use=xnuppc+80x30, use=xnuppc+basic,
1563 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1564 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1566 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1567 use=xnuppc+90x30, use=xnuppc+basic,
1569 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1570 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1572 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1573 use=xnuppc+100x37, use=xnuppc+basic,
1575 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1576 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1578 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1579 use=xnuppc+112x37, use=xnuppc+basic,
1581 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1582 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1584 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1585 use=xnuppc+128x40, use=xnuppc+basic,
1587 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1588 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1590 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1591 use=xnuppc+128x48, use=xnuppc+basic,
1593 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1594 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1596 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1597 use=xnuppc+144x48, use=xnuppc+basic,
1599 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1600 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1602 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1603 use=xnuppc+160x64, use=xnuppc+basic,
1605 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1606 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1608 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1609 use=xnuppc+200x64, use=xnuppc+basic,
1611 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1612 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1614 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1615 use=xnuppc+200x75, use=xnuppc+basic,
1617 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1618 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1620 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1621 use=xnuppc+256x96, use=xnuppc+basic,
1623 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1624 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1629 # BeOS entry for Terminal program Seems to be almost ANSI
1630 beterm|BeOS Terminal,
1631 am, eo, mir, msgr, xenl, xon,
1632 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1633 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1634 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1635 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1636 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1637 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1638 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1639 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1640 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1641 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1642 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1643 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1644 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1645 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1646 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1647 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1648 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1649 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1650 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1651 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1657 # This entry is good for the 1.2.13 or later version of the Linux console.
1659 # ***************************************************************************
1662 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1663 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1664 # * character. Here are the keymap replacement lines that will set this up: *
1666 # keycode 15 = Tab Tab
1667 # alt keycode 15 = Meta_Tab
1668 # shift keycode 15 = F26
1669 # string F26 ="\033[Z"
1671 # * This has to use a key slot which is unfortunate (any unused one will *
1672 # * do, F26 is the higher-numbered one). The change ought to be built *
1673 # * into the kernel tables. *
1675 # ***************************************************************************
1677 # All linux kernels since 1.2.13 (at least) set the screen size
1678 # themselves; this entry assumes that capability.
1680 linux-basic|linux console,
1681 am, bce, eo, mir, msgr, xenl, xon,
1683 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1684 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1685 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1686 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1687 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1688 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1689 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1690 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1691 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1692 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1693 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1694 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1695 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1696 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1697 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1698 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1699 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1700 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1701 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1702 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1703 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1704 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1705 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1706 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1709 linux-m|Linux console no color,
1711 setab@, setaf@, setb@, setf@, use=linux,
1713 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1714 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1715 # not supposedly back-portable to older SV curses (although it has worked fine
1716 # on Solaris for several years) and not supported in ncurses versions before
1718 linux-c-nc|linux console with color-change,
1720 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1721 %02x%p4%{255}%*%{1000}%/%02x,
1722 oc=\E]R, use=linux-basic,
1723 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1724 linux-c|linux console 1.3.6+ for older ncurses,
1726 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1727 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1728 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1729 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1730 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1731 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1732 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1733 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1735 oc=\E]R, use=linux-basic,
1737 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1738 # get a block cursor for cvvis.
1739 # reported by Frank Heckenbach <frank@g-n-u.de>.
1740 linux2.2|linux 2.2.x console,
1741 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1742 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1744 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1745 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1746 # Although the kernel has mappings for these, they were not in the default
1747 # font (tested with Debian and Fedora):
1753 linux2.6|linux 2.6.x console,
1754 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1756 enacs=\E)0, rmacs=^O,
1757 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1758 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1759 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1761 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1762 # It is the same as xterm's erase-saved-lines feature.
1763 linux3.0|linux 3.0 kernels,
1764 E3=\E[3J, use=linux2.6,
1766 # This is Linux console for ncurses.
1767 linux|linux console,
1770 # Subject: linux 2.6.26 vt back_color_erase
1771 # Changes to the Linux console driver broke bce model as reported in
1772 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1774 # http://lkml.org/lkml/2008/4/26/305
1775 # http://lkml.org/lkml/2008/10/3/66
1776 linux2.6.26|linux console w/o bce,
1779 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1780 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1781 ich@, ich1@, use=linux,
1783 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1784 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1785 linux-koi8|linux with koi8 alternate character set,
1786 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1787 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1788 \211w\210x\201y\230z\231{\267|\274~\224,
1789 use=linux, use=klone+koi8acs,
1791 # Another entry for KOI8-r with Qing Long's acsc.
1792 # (which one better complies with the standard?)
1793 linux-koi8r|linux with koi8-r alternate character set,
1794 use=linux, use=klone+koi8acs,
1796 # Entry for the latin1 and latin2 fonts
1797 linux-lat|linux with latin1 or latin2 alternate character set,
1798 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1799 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1800 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1803 # This uses graphics from VT codeset instead of from cp437.
1804 # reason: cp437 (aka "straight to font") is not functional under luit.
1805 # from: Andrey V Lukyanov <land@long.yar.ru>.
1806 linux-vt|linux console using VT codes for graphics,
1807 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1809 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1812 # This is based on the Linux console (relies on the console to perform some
1813 # of the functionality), but does not recognize as many control sequences.
1814 # The program comes bundled with an old (circa 1998) copy of the Linux
1815 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1816 # \E* move cursor to home, as as \E[H
1818 # \EE move cursor to beginning of row
1819 # \E[y,xf same as \E[y,xH
1821 # Note: The status-line support is buggy (dsl does not work).
1822 kon|kon2|jfbterm|Kanji ON Linux console,
1824 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1825 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1828 # 16-color linux console entry; this works with a 256-character
1829 # console font but bright background colors turn into dim ones when
1830 # you use a 512-character console font. This uses bold for bright
1831 # foreground colors and blink for bright background colors.
1832 linux-16color|linux console with 16 colors,
1833 colors#16, ncv#42, pairs#256,
1834 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1835 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1838 # bterm (bogl 0.1.18)
1839 # Implementation is in bogl-term.c
1840 # Key capabilities from linux terminfo entry
1843 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1844 # bterm does not support sgr, since it only processes one parameter -TD
1845 bterm|bogl virtual terminal,
1847 colors#8, cols#80, lines#24, pairs#64,
1848 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1849 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1850 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1851 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1852 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1853 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1854 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1855 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1856 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1857 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1858 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1859 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1860 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1861 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1866 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1869 cols#80, it#8, lines#25,
1870 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1871 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1872 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1873 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1874 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1875 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1876 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1877 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1878 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1879 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1880 smso=\E[7m, smul=\E[4m,
1881 mach-bold|Mach Console with bold instead of underline,
1882 rmul=\E[0m, smul=\E[1m, use=mach,
1883 mach-color|Mach Console with ANSI color,
1885 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1886 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1888 # From: Samuel Thibault
1889 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1890 # Files: i386/i386at/kd.c
1892 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1894 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1895 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1896 \263y\363z\362{\343|\330}\234~\376,
1897 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1898 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1899 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1900 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1901 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1904 mach-gnu-color|Mach Console with ANSI color,
1906 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1907 setaf=\E[3%p1%dm, use=mach-gnu,
1909 # From: Marcus Brinkmann
1910 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1912 # Comments in the original are summarized here:
1914 # hurd uses 8-bit characters (km).
1916 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1918 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1919 # have the eat_newline_glitch. It doesn't support setting or removing tab
1922 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1923 # one byte instead three.
1925 # <ich1> is not included because hurd has insert mode.
1927 # hurd doesn't use ^J for scrolling, because this could put things into the
1928 # scrollback buffer.
1930 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1931 # This is a GNU extension.
1933 # The original has commented-out ncv, but is restored here.
1935 # Reading the source, RIS resets cnorm, but not xmous.
1936 hurd|The GNU Hurd console server,
1937 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1938 colors#8, it#8, ncv#18, pairs#64,
1939 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1941 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1942 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1943 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1944 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1945 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1946 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1947 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1948 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1949 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1950 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1951 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1952 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1953 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1954 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1955 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1956 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1957 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1958 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1959 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1960 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1961 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1962 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1963 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1964 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1965 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1972 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1973 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1974 # right corner without triggering a scroll. The ncurses terminfo library can
1975 # handle this case with the <ich1> capability, and prefers <am> for better
1976 # optimization. Bug: The <op> capability resets attributes.
1977 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1978 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1979 qnx|qnx4|qnx console,
1980 daisy, km, mir, msgr, xhpa, xt,
1981 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1982 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1983 \303u\264v\301w\302x\263,
1984 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1985 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1986 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1987 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1988 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1989 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1990 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1991 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1992 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1993 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1994 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1995 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1996 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1997 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1998 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1999 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2000 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2001 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2002 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2003 kext=\377\270, kf1=\377\201, kf10=\377\212,
2004 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2005 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2006 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2007 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2008 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2009 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2010 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2011 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2012 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2013 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2014 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2015 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2016 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2017 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2018 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2019 khlp=\377\350, khome=\377\240, khts=\377\342,
2020 kich1=\377\253, kil1=\377\273, kind=\377\261,
2021 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2022 knp=\377\252, knxt=\377\312, kopn=\377\357,
2023 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2024 kprv=\377\302, krdo=\377\336, kref=\377\354,
2025 kres=\377\360, krfr=\377\347, kri=\377\271,
2026 krmir=\377\313, krpl=\377\362, krst=\377\352,
2027 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2028 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2029 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2030 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2031 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2035 qnxt|qnxt4|QNX4 terminal,
2038 qnxm|QNX4 with mouse events,
2040 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2041 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2042 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2043 smicm=\E/>2h, use=qnx4,
2048 # Monochrome QNX4 terminal or console. Setting this terminal type will
2049 # allow an application running on a color console to behave as if it
2050 # were a monochrome terminal. Output will be through stdout instead of
2051 # console writes because the term routines will recognize that the
2052 # terminal name starts with 'qnxt'.
2054 qnxtmono|Monochrome QNX4 terminal or console,
2058 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2059 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2060 # (TD: derive from original qnx4 entry)
2061 qnxt2|qnx 2.15 serial terminal,
2063 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2064 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2066 # QNX ANSI terminal definition
2069 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2070 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2071 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2072 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
2073 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2074 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2075 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2076 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2077 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2078 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2079 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2080 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2081 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2082 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2083 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2084 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2085 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2086 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2087 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2088 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2089 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2090 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2091 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2092 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2093 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2094 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2095 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2096 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2097 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2098 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2099 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2100 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2101 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2102 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2103 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2104 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2105 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2106 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2107 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2108 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2109 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2111 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2113 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2114 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2115 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2116 smul=\E[4m, tbc=\E[3g,
2117 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2119 qansi|QNX ansi with console writes,
2120 daisy, xhpa, use=qansi-g,
2122 qansi-t|QNX ansi without console writes,
2125 qansi-m|QNX ansi with mouse,
2127 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2128 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2129 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2130 smicm=\E[>2h, use=qansi,
2132 qansi-w|QNX ansi for windows,
2137 # SCO console and SOS-Syscons console for 386bsd
2138 # (scoansi: had unknown capabilities
2139 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2140 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2141 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2142 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2143 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2144 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2145 # on the <smacs>=\E[12m -- esr)
2147 # klone+sgr-dumb is an error since the acsc does not match -TD
2149 # In this description based on SCO's keyboard(HW) manpage list of default
2150 # function key values:
2151 # F13-F24 are shifted F1-F12
2152 # F25-F36 are control F1-F12
2153 # F37-F48 are shift+control F1-F12
2155 # hpa/vpa work in the console, but not in scoterm:
2159 # SCO's terminfo uses
2162 # which do not work (console or scoterm).
2164 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2165 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2166 OTbs, am, bce, eo, xon,
2167 colors#8, cols#80, it#8, lines#25, pairs#64,
2168 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2169 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2171 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2172 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2173 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2174 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2175 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2176 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2177 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2178 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2179 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2180 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2181 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2182 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2183 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2184 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2185 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2186 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2187 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2188 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2189 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2190 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2191 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2192 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2193 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2194 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2195 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2196 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2198 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2199 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2200 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2201 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2202 %p7%t;8%;%?%p9%t;12%e;10%;m,
2203 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2204 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2205 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2206 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2207 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2209 # make this easy to change...
2210 scoansi|SCO Extended ANSI standard crt,
2215 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2216 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2217 # for the application keypad mode. We have added iris-ansi-ap rather than
2218 # change the original to keypad mode.
2220 # (iris-ansi: added rmam/smam based on init string -- esr)
2222 # This entry, and those derived from it, is used in xwsh (also known as
2223 # winterm). Some capabilities that do not fit into the terminfo model
2224 # include the shift- and control-functionkeys:
2226 # F1-F12 generate different codes when shift or control modifiers are used.
2230 # control-F1 \E[025q
2232 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2233 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2235 # The cursor keys also have different codes:
2236 # control-up \E[162q
2237 # control-down \E[165q
2238 # control-left \E[159q
2239 # control-right \E[168q
2242 # shift-down \E[164q
2243 # shift-left \E[158q
2244 # shift-right \E[167q
2246 # control-tab \[072q
2248 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2250 cols#80, it#8, lines#40,
2251 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2252 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2253 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2254 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2255 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2256 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2257 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2258 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2259 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2260 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2261 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2262 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2263 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2264 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2265 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2266 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2267 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2268 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2269 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2271 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2272 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2273 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2275 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2276 # (T.Dickey 98/1/24)
2277 iris-color|xwsh|IRIX ANSI with color,
2279 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2280 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2281 rmul=\E[24m, rs1=\Ec,
2282 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2283 sitm=\E[3m, use=vt100+enq, use=klone+color,
2286 #### OpenBSD consoles
2288 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2290 # The following terminal descriptions for the AMD/Intel PC console
2291 # were prepared based on information contained in the OpenBSD-4.9
2292 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2294 # Added bce based on testing with tack -TD
2295 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2296 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2298 # Notes from testing with vttest:
2299 # fails wrapping test
2301 # identifies as vt200 with selective erase, but does not implement DECSCA
2304 # ESC # 8 DEC Screen Alignment Test (DECALN).
2305 # CSI ? 5 h Reverse Video (DECSCNM).
2307 pccon+keys|OpenBSD PC keyboard keys,
2308 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2309 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2310 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2311 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2312 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2313 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2314 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2315 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2317 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2318 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2320 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2322 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2323 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2325 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2326 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2328 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2329 # underline renders as color
2330 pccon+colors|ANSI colors for OpenBSD PC console,
2332 colors#8, ncv#2, pairs#64,
2333 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2334 pccon+base|base capabilities for OpenBSD PC console,
2335 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2336 cols#80, it#8, lines#24,
2337 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
2338 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2339 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2340 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2341 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2342 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2343 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2345 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2346 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2347 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2348 use=pccon0-m, use=pccon+colors,
2349 pccon-m|OpenBSD PC console without colors,
2350 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2351 pccon|OpenBSD PC console,
2352 use=pccon-m, use=pccon+colors,
2354 #### NetBSD consoles
2356 # pcvt termcap database entries (corresponding to release 3.31)
2357 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2359 # (For the terminfo master file, I translated these into terminfo syntax.
2360 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2361 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2362 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2364 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2365 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2366 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2367 pcvtXX|pcvt vt200 emulator (DEC VT220),
2368 am, km, mir, msgr, xenl,
2370 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2372 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2373 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2374 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2375 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2376 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2377 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2378 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2379 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2380 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2381 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2382 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2383 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2384 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2385 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2386 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2387 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2388 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2389 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2390 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2392 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2393 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2394 # 50 lines entries; 80 columns
2395 pcvt25|dec vt220 emulation with 25 lines,
2397 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2398 pcvt28|dec vt220 emulation with 28 lines,
2400 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2401 pcvt35|dec vt220 emulation with 35 lines,
2403 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2404 pcvt40|dec vt220 emulation with 40 lines,
2406 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2407 pcvt43|dec vt220 emulation with 43 lines,
2409 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2410 pcvt50|dec vt220 emulation with 50 lines,
2412 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2414 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2415 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2416 # 50 lines entries; 132 columns
2417 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2419 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2420 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2422 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2423 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2425 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2426 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2428 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2429 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2431 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2432 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2434 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2436 # OpenBSD implements a color variation
2437 pcvt25-color|dec vt220 emulation with 25 lines and color,
2439 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2440 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2441 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2442 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2443 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2446 # Terminfo entries to enable the use of the ncurses library in colour on a
2447 # NetBSD-arm32 console (only tested on a RiscPC).
2448 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2449 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2450 # typo in invis - TD
2451 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2452 am, bce, msgr, xenl, xon,
2453 cols#80, it#8, lines#30,
2454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2455 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2456 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2457 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2458 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2459 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2460 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2461 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2462 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2463 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2464 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2465 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2466 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2467 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2468 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2470 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2471 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2472 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2473 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2476 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2477 cols#132, lines#50, use=arm100,
2479 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2480 # manufactured by Sharp for the Japenese market.
2481 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2482 x68k|x68k-ite|NetBSD/x68k ITE,
2484 kclr=\E[9~, khlp=\E[28~, use=vt220,
2487 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2489 # (still unfinished, but good enough so far.)
2490 ofcons|DNARD OpenFirmware console,
2493 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2494 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2495 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2496 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2497 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2498 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2499 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2500 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2501 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2502 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2503 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2504 rmso=\2330m, rmul=\2330m,
2505 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2506 %;%?%p1%p3%|%t;7%;m,
2507 sgr0=\2330m, smso=\2337m, smul=\2334m,
2509 # NetBSD "wscons" emulator in vt220 mode.
2510 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2511 # The emulator renders underlined text in red. Colors are otherwise usable.
2513 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2514 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2515 # vt220 screens in vttest do not work with this emulator. For instance, it
2516 # identifies itself (primary DA response) as a vt220 with selective erase. But
2517 # the selective erase feature does not work. The secondary response is copied
2518 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2519 # the level of detail in a termcap, it is a passable emulator, since ECH does
2520 # work. Don't use it on a VMS system -TD
2521 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2523 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2524 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2525 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2526 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2527 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2528 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2529 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2531 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2534 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2536 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2537 # Initial testing set TERM=xterm, based on comments by developers, found too
2538 # many differences to continue in that path. However, test-results may be
2539 # useful to people curious about compatibility with xterm.
2541 # Testing with tack:
2543 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2544 # There is color-bleeding in the color-pairs screen.
2545 # Attributes do not work with color
2547 # Failed: kf1-kf4, kf13-kf48, khome, kend
2548 # (effectively xterm-r6 for function-keys)
2549 # None of the function or cursor key-modifiers are encoded.
2550 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2552 # Testing with vttest:
2553 # -------------------
2554 # Identifies as vt220 with selective erase
2555 # (however, selective erase refers to DECSCA, SPA)
2556 # Does not implement vt52
2557 # Uses spaces to simulate double-size characters
2558 # Does not support 8-bit controls
2559 # Does not support VT220 reports
2560 # Does not support send/receive mode
2561 # Supports ECH (like rxvt)
2562 # Does not support DECSCA
2563 # Does not support any of the ISO-6429 cursor-movement
2564 # Does not support any of the ISO-6429 miscellaneous tests
2565 # (SL/SR also leave unexpected char on screen too)
2566 # Background does not change in menu 11.6.9 (SGR 22-27)
2567 # None of the xterm special features tests work
2568 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2569 kbs=\177, use=wsvt25,
2571 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2573 rcons|BSD rasterconsole,
2575 # Color version of above. Color currently only provided by NetBSD.
2576 rcons-color|BSD rasterconsole with ANSI color,
2579 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2581 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2582 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2583 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2584 # -- compare with cons25w
2586 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2587 colors#8, cols#80, it#8, lines#18, pairs#64,
2588 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2589 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2590 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2591 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2592 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2593 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2594 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2595 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2596 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2597 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2598 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2599 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2600 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2601 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2602 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2603 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2605 #### FreeBSD console entries
2607 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2608 # Andrey Chernov maintains the FreeBSD termcap distributions.
2610 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2611 # or comment out the :cb: capability in the console entry.
2613 # Alexander Lukyanov reports:
2614 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2615 # Now el1 clears not only to the line beginning, but also a large chunk
2616 # of previous line. But there is another bug - ech does not work at all.
2620 # common entry without semigraphics
2621 # Bug: The <op> capability resets attributes.
2622 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2623 # instance el1 does if the cursor is moved to the right margin first. Removed
2624 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2626 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2627 # Note that this disables standout with color.
2629 # The emulator sends difference strings based on shift- and control-keys,
2631 # F13-F24 are shifted F1-F12
2632 # F25-F36 are control F1-F12
2633 # F37-F48 are shift+control F1-F12
2634 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2635 am, bce, bw, eo, msgr, npc,
2636 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2637 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2638 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2639 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2640 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2641 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2642 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2643 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2644 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2645 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2646 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2647 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2648 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2649 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2650 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2651 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2652 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2653 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2654 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2655 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2656 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2657 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2658 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2659 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2660 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2662 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2663 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2664 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2665 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2668 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2669 kbs=\177, kdch1=\E[3~, use=cons25,
2670 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2672 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2673 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2674 smul=\E[4m, use=cons25,
2675 cons30|ansi80x30|freebsd console (30-line ansi mode),
2676 lines#30, use=cons25,
2677 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2678 lines#30, use=cons25-m,
2679 cons43|ansi80x43|freebsd console (43-line ansi mode),
2680 lines#43, use=cons25,
2681 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2682 lines#43, use=cons25-m,
2683 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2684 lines#50, use=cons25,
2685 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2686 lines#50, use=cons25-m,
2687 cons60|ansi80x60|freebsd console (60-line ansi mode),
2688 lines#60, use=cons25,
2689 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2690 lines#60, use=cons25-m,
2691 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2692 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2693 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2696 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2698 op@, rmul=\E[m, setab@, setaf@,
2699 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2700 %t;30;1%;%?%p6%t;1%;m,
2701 smul=\E[4m, use=cons25r,
2702 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2703 lines#50, use=cons25r,
2704 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2705 lines#50, use=cons25r-m,
2706 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2707 lines#60, use=cons25r,
2708 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2709 lines#60, use=cons25r-m,
2710 # ISO 8859-1 FreeBSD console
2711 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2712 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2713 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2714 \226v\227w\230x\231y\232z\233~\237,
2716 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2718 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2719 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2720 smul=\E[4m, use=cons25l1,
2721 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2722 lines#50, use=cons25l1,
2723 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2724 lines#50, use=cons25l1-m,
2725 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2726 lines#60, use=cons25l1,
2727 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2728 lines#60, use=cons25l1-m,
2730 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2731 # which is intended to be xterm-compatible. See for example
2732 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2733 # in particular scterm-teken.c
2735 # For FreeBSD 9 and 10:
2736 # --------------------
2737 # The /etc/ttys entries for console and other ttys are all configured to set
2740 # Testing with tack:
2741 # There is no VT100 line-drawing (uses +'s and -'s)
2742 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2744 # Testing with vttest:
2745 # Menu 2 diamonds don't work, blink ditto, light background ditto
2746 # The terminal identifies itself as VT100 with AVO
2747 # There is no VT52 support
2748 # There is no doublesize character support
2749 # The terminal supports ECH (like rxvt)
2750 # The terminal does not support send/receive mode
2751 # The terminal supports all of the ISO-6429 cursor-movement
2752 # The terminal supports some of the ISO-6429 miscellaneous tests
2753 # (SL/SR also leave unexpected char on screen too)
2755 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2756 # the cells which happen to have ASCII control-character values:
2757 # - ^X arrow pointing up
2758 # . ^Y arrow pointing down
2762 # Those are removed from this entry's acsc string to avoid confusion.
2763 # The resulting description provides correct line-drawing and function-keys -TD
2764 teken|syscons with teken,
2766 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2767 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2768 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2769 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2770 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2771 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2772 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2773 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2774 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2775 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2777 #### 386BSD and BSD/OS Consoles
2780 # This was the original 386BSD console entry (I think).
2781 # Some places it's named oldpc3|oldibmpc3.
2782 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2783 origpc3|origibmpc3|IBM PC 386BSD Console,
2784 OTbs, am, bw, eo, xon,
2786 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2788 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2789 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2790 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2791 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2792 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2793 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2795 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2796 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2799 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2800 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2801 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2802 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2804 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2805 # Note, the emulator supports many of the additional console features
2806 # listed in the iBCS2 (e.g. character-set selection) though not all
2807 # are described here. This entry really ought to be upgraded.
2808 # Also note, the console will also work with fewer lines after doing
2809 # "stty rows NN", e.g. to use 24 lines.
2810 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2811 # Bug: The <op> capability resets attributes.
2812 bsdos-pc|IBM PC BSD/OS Console,
2813 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2814 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2815 use=bsdos-pc-nobold,
2817 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2818 use=klone+color, use=bsdos-pc-m,
2820 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2821 OTbs, am, eo, km, xon,
2822 cols#80, it#8, lines#25,
2823 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2824 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2825 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2826 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2827 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2828 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2829 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2830 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2831 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2834 # Old names for BSD/OS PC console used in releases before 4.1.
2835 pc3|BSD/OS on the PC Console,
2836 use=bsdos-pc-nobold,
2837 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2840 # BSD/OS on the SPARC
2841 bsdos-sparc|Sun SPARC BSD/OS Console,
2844 # BSD/OS on the PowerPC
2845 bsdos-ppc|PowerPC BSD/OS Console,
2850 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2852 # Actually (TD pointed this out at the time the acsc string was added):
2853 # vt52 shouldn't define full acsc since most of the cells don't match.
2854 # see vt100 manual page A-31. This is the list that does match:
2863 # The line-drawing happens to work in several terminal emulators, but should
2864 # not be used as a guide to the capabilities of the vt52. Note in particular
2865 # that vt52 does not support line-drawing characters (the scan-X values refer
2866 # to a crude plotting feature) -TD
2869 cols#80, it#8, lines#24,
2870 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2871 cub1=\ED, cud1=\EB, cuf1=\EC,
2872 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2873 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2874 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2876 #### DEC VT100 and compatibles
2878 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2879 # and micro consoles can be found in the `obsolete' section. More details on
2880 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2881 # found near the end of this file.
2883 # Except where noted, these entries are DEC's official terminfos.
2884 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2885 # Engineering for more information. Updated terminfos and termcaps
2886 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2888 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2889 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2890 # its name to Boundless Technologies; see http://www.boundless.com.
2893 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2894 # certainly includes what DEC called the `Level 1 editing extension' codes;
2895 # only the very oldest VT100s lacked these and there probably aren't any of
2896 # those left alive. To capture these, use one of the VT102 entries.
2898 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2899 # since the cursor is left in a different position while in the
2900 # weird state (concept at beginning of next line, vt100 at end
2901 # of this line) so all versions of vi before 3.7 don't handle
2902 # <xenl> right on vt100. The correct way to handle <xenl> is when
2903 # you output the char in column 80, immediately output CR LF
2904 # and then assume you are in column 1 of the next line. If <xenl>
2905 # is on, am should be on too.
2907 # I assume you have smooth scroll off or are at a slow enough baud
2908 # rate that it doesn't matter (1200? or less). Also this assumes
2909 # that you set auto-nl to "on", if you set it off use vt100-nam
2912 # The padding requirements listed here are guesses. It is strongly
2913 # recommended that xon/xoff be enabled, as this is assumed here.
2915 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2916 # tab settings are in non-volatile memory and don't need to be
2917 # reset upon login. Also setting the number of columns glitches
2918 # the screen annoyingly. You can type "reset" to get them set.
2920 # The VT100 series terminals have cursor ("arrows") keys which can operate
2921 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2922 # is the reset state, and is assumed to be the normal state. Application
2923 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2924 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2925 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2926 # was provided primarily as an aid to the porting of VT52 applications. It is
2927 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2928 # applications such as vi will always transmit the <smkx> string. Therefore,
2929 # the definitions for the cursor keys are made to match what the terminal
2930 # transmits after the <smkx> string is transmitted. If the <smkx> string
2931 # is a null string or is not defined, then cursor keys are assumed to be in
2932 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2933 # else the application may fail. It is also expected that applications will
2934 # always transmit the <rmkx> string to the terminal before they exit.
2936 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2937 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2938 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2939 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2940 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2941 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2942 # Enter key transmits the same as the Return key (Note: the Return key
2943 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2944 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2945 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2946 # is normally in Numeric Mode. If an application requires that the keypad be
2947 # in Application Mode then it is expected that the user, or the application,
2948 # will set the TERM environment variable to point to a terminfo entry which has
2949 # defined the <smkx> string to include the codes that switch the keypad into
2950 # Application Mode, and the terminfo entry will also define function key
2951 # fields to match the Application Mode control codes. If the <smkx> string
2952 # is a null string or is not defined, then the keypad is assumed to be in
2953 # Numeric Mode. If the <smkx> string switches the keypad into Application
2954 # Mode, it is expected that the <rmkx> string will contain the control codes
2955 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2956 # applications which transmit the <smkx> string will also always transmit the
2957 # <rmkx> string to the terminal before they exit.
2959 # Here's a diagram of the VT100 keypad keys with their bindings.
2960 # The top line is the name of the key (some DEC keyboards have the keys
2961 # labelled somewhat differently, like GOLD instead of PF1, but this is
2962 # the most "official" name). The second line is the escape sequence it
2963 # generates in Application Keypad mode (where "$" means the ESC
2964 # character). The third line contains two items, first the mapping of
2965 # the key in terminfo, and then in termcap.
2966 # _______________________________________
2967 # | PF1 | PF2 | PF3 | PF4 |
2968 # | $OP | $OQ | $OR | $OS |
2969 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2971 # | $Ow | $Ox | $Oy | $Om |
2972 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2974 # | $Ot | $Ou | $Ov | $Ol |
2975 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2977 # | $Oq | $Or | $Os | enter |
2978 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2981 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2983 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2984 # terminfo guidelines. That is a compromise used to assign the remaining
2985 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2987 vt100+keypad|dec vt100 numeric keypad no fkeys,
2988 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2989 vt100+pfkeys|dec vt100 numeric keypad,
2990 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2992 vt100+fnkeys|dec vt100 numeric keypad,
2993 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2994 kf9=\EOw, use=vt100+pfkeys,
2996 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2997 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2998 # use the 5-key arrangement to model the arrow keys as suggested in the
2999 # terminfo guidelines:
3000 # _______________________________________
3001 # | PF1 | PF2 | PF3 | PF4 |
3002 # | $OP | $OQ | $OR | $OS |
3003 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3005 # | $Ow | $Ox | $Oy | $Om |
3006 # |_ka1__K1_|_________|_ka3__K3_|_________|
3008 # | $Ot | $Ou | $Ov | $Ol |
3009 # |_________|_kb2__K2_|_________|_________|
3011 # | $Oq | $Or | $Os | enter |
3012 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3015 # |___________________|_________|_kent_@8_|
3017 vt220+keypad|dec vt220 numeric keypad,
3018 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3019 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3022 vt100+enq|ncurses extension for vt100-style ENQ,
3023 u8=\E[?1;2c, use=ansi+enq,
3024 vt102+enq|ncurses extension for vt102-style ENQ,
3025 u8=\E[?6c, use=ansi+enq,
3027 # And here, for those of you with orphaned VT100s lacking documentation, is
3028 # a description of the soft switches invoked when you do `Set Up'.
3030 # Scroll 0-Jump Shifted 3 0-#
3031 # | 1-Smooth | 1-British pound sign
3032 # | Autorepeat 0-Off | Wrap Around 0-Off
3034 # | | Screen 0-Dark Bkg | | New Line 0-Off
3035 # | | | 1-Light Bkg | | | 1-On
3036 # | | | Cursor 0-Underline | | | Interlace 0-Off
3037 # | | | | 1-Block | | | | 1-On
3039 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3041 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3042 # | | | 1-On | | | 1-50 Hz
3043 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3044 # | | 1-ANSI | | 1-8 Bits
3045 # | Keyclick 0-Off | Parity 0-Off
3047 # Margin Bell 0-Off Parity Sense 0-Odd
3050 # The following SET-UP modes are assumed for normal operation:
3051 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3052 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3053 # Other SET-UP modes may be set for operator convenience or communication
3054 # requirements; I recommend
3055 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3056 # Unless you have a graphics add-on such as Digital Engineering's VT640
3057 # (and even then, whenever it can be arranged!) you should set
3060 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3061 vt100|vt100-am|dec vt100 (w/advanced video),
3062 OTbs, am, mc5i, msgr, xenl, xon,
3063 cols#80, it#8, lines#24, vt#3,
3064 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3065 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3066 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3067 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3068 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3069 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3070 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3071 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
3072 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
3073 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
3074 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
3075 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
3076 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3077 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3078 %;m%?%p9%t\016%e\017%;$<2>,
3079 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
3080 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
3082 vt100nam|vt100-nam|vt100 no automargins,
3084 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3085 vt100-vb|dec vt100 (w/advanced video) & no beep,
3086 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3088 # Ordinary vt100 in 132 column ("wide") mode.
3089 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3091 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3092 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3093 cols#132, lines#14, vt@,
3094 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3096 # vt100 with no advanced video.
3097 vt100-nav|vt100 without advanced video option,
3099 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3101 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3102 cols#132, lines#14, use=vt100-nav,
3104 # vt100 with one of the 24 lines used as a status line.
3105 # We put the status line on the top.
3106 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3109 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3110 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3111 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3112 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3114 # Status line at bottom.
3115 # Clearing the screen will clobber status line.
3116 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3119 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3120 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3122 # Most of the `vt100' emulators out there actually emulate a vt102
3123 # This entry (or vt102-nsgr) is probably the right thing to use for
3126 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3128 vt102-w|dec vt102 in wide mode,
3130 rs3=\E[?3h, use=vt102,
3132 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3133 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3134 # string in the canonical vt100 entry above leaves the screen littered
3135 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3136 # after highlight turnoffs. This entry should fix that, and even leave
3137 # ACS support working, at the cost of making multiple-highlight changes
3138 # slightly more expensive.
3139 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3140 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3141 sgr@, sgr0=\E[m, use=vt102,
3143 # VT125 Graphics CRT. Clear screen also erases graphics
3144 # Some vt125's came configured with vt102 support.
3145 vt125|vt125 graphics terminal,
3147 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3149 # This isn't a DEC entry, it came from University of Wisconsin.
3150 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3153 cols#80, it#8, lines#24, vt#3,
3154 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3155 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3156 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
3157 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3158 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3159 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3160 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3161 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3162 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3164 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3165 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3166 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3168 # vt132 - like vt100 but slower and has ins/del line and such.
3169 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3170 # manual and from the ANSI standard, this describes the actual
3171 # terminal. I've never actually used a vt132 myself, so this
3176 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3177 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3179 # This vt220 description maps F5--F9 to the second block of function keys
3180 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3181 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3182 # PF1--PF4 are used as F1--F4.
3185 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3186 OTbs, OTpt, am, mir, msgr, xenl, xon,
3187 cols#80, lines#24, vt#3,
3189 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3190 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3191 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3192 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3193 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3194 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3195 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3196 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3197 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3198 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3199 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3200 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3201 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3202 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3203 rmso=\E[27m, rmul=\E[24m,
3204 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3205 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3206 %p9%t\E(0%e\E(B%;$<2>,
3207 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3208 smso=\E[7m, smul=\E[4m,
3210 # A much better description of the VT200/220; used to be vt220-8
3211 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3212 # designation to accommodate bug in pcvt -TD
3214 # Here's a picture of the VT220 editing keypad:
3215 # +--------+--------+--------+
3216 # | Find | Insert | Remove |
3217 # +--------+--------+--------+
3218 # | Select | Prev | Next |
3219 # +--------+--------+--------+
3220 vt220|vt200|dec vt220,
3221 OTbs, am, mir, msgr, xenl, xon,
3222 cols#80, it#8, lines#24, vt#3,
3223 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3224 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3225 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3226 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3227 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3228 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3229 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3230 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3231 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3232 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3233 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3234 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3235 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3236 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3237 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3238 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3239 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3240 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3241 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3242 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3244 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3245 %p9%t\E(0%e\E(B%;$<2>,
3246 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3247 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3249 vt220-w|vt200-w|DEC vt220 in wide mode,
3251 rs3=\E[?3h, use=vt220,
3252 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3253 OTbs, am, mc5i, mir, msgr, xenl, xon,
3254 cols#80, it#8, lines#24, vt#3,
3255 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3256 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3257 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3258 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3259 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3260 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3261 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3262 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3263 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3264 il=\233%p1%dL, il1=\233L, ind=\ED,
3265 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3266 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3267 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3268 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3269 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3270 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3271 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3272 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3273 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3274 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3275 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3276 rmul=\23324m, rs1=\233?3l, sc=\E7,
3277 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3278 %?%p9%t\E(0%e\E(B%;$<2>,
3279 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3280 smso=\2337m, smul=\2334m, tbc=\2333g,
3283 # This vt220 description regards F6--F10 as the second block of function keys
3284 # at the top of the keyboard. This mapping follows the description given
3285 # in the VT220 Programmer Reference Manual and agrees with the labeling
3286 # on some terminals that emulate the vt220. There is no support for an F5.
3287 # See vt220 for an alternate mapping.
3289 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3290 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3291 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3292 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3293 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3295 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3297 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3299 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3300 # (not an official DEC entry!)
3301 # The problem with real vt220 terminals is they don't send escapes when in
3302 # in vt220 mode. This can be gotten around two ways. 1> don't send
3303 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3304 # features of vt100 advanced video which it then has.
3306 # This entry takes the view of putting a vt220 into vt100 mode so
3307 # you can use the escape key in emacs and everything else which needs it.
3309 # You probably don't want to use this on a VMS machine since VMS will think
3310 # it has a vt220 and will get fouled up coming out of emacs
3312 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3313 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3315 vt200-js|vt220-js|dec vt200 series with jump scroll,
3318 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3319 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3320 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3321 ht=^I, il1=\E[L, ind=\ED,
3322 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3324 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3325 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3326 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3327 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3328 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3329 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3331 # This was DEC's vt320. Use the purpose-built one below instead
3332 #vt320|DEC VT320 in vt100 emulation mode,
3335 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3337 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3339 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3341 # These entries are not DEC's official ones, they were purpose-built for the
3342 # VT320. Here are the designer's notes:
3343 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3344 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3345 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3346 # Things that use <knxt> usually use tab anyways... and things that don't use
3347 # tab usually use <knxt> instead...
3348 # kprv is same as tab - Backtab is useless...
3349 # I left out <sgr> because of its RIDICULOUS complexity,
3350 # and the resulting fact that it causes the termcap translation of the entry
3351 # to SMASH the 1k-barrier...
3352 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3353 # (vt320: uncommented <fsl> --esr)
3354 vt320|vt300|dec vt320 7 bit terminal,
3355 am, hs, mir, msgr, xenl,
3356 cols#80, lines#24, wsl#80,
3357 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3358 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3359 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3361 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3362 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3363 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3364 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3365 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3366 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3367 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3368 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3369 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3370 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3371 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3372 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3373 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3374 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3375 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3377 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3379 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3380 %p9%t\E(0%e\E(B%;$<2>,
3381 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3382 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3383 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3384 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3386 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3387 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3388 # We have to init 132-col mode, not 80-col mode.
3389 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3391 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3392 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3393 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3395 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3396 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3398 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3399 # which are pretty much a superset of the VT320. They have the
3400 # host writable status line, yet another different DRCS matrix size,
3401 # and such, but they add the DEC Technical character set, Multiple text
3402 # pages, selectable length pages, and the like. The difference between
3403 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3404 # monitor, the former has 4 planes and a color monitor. These terminals
3405 # support VT131 and ANSI block mode, but as with much of these things,
3406 # termcap/terminfo doesn't deal with these features.
3408 # Note that this entry is are set up in what was the standard way for GNU
3409 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3410 # keys were switched into application mode at the same time the numeric pad
3411 # is switched into application mode. This changes the definitions of the
3412 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3413 # your termcap or terminfo entry,
3415 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3416 # (vt340: string capability "sb=\E[M" corrected to "sr";
3417 # also, added <rmam>/<smam> based on the init string -- esr)
3418 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3419 am, eslok, hs, mir, msgr, xenl, xon,
3420 cols#80, it#8, lines#24, vt#3,
3421 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3422 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3423 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3424 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3425 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3426 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3427 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3428 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3429 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3431 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3433 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3434 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3435 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3436 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3437 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3438 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3439 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3440 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3441 %p9%t\E(0%e\E(B%;$<2>,
3442 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3443 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3444 tsl=\E[2$~\E[1$}\E[1;%dH,
3446 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3447 # (originally written with vt420 as its primary name, and usable for it).
3449 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3450 # text pages and long text pages with selectable length of the vt340, along
3451 # with left and right margins, rectangular area text copy, fill, and erase
3452 # operations, selected region character attribute change operations,
3453 # page memory and rectangle checksums, insert/delete column, reception
3454 # macros, and other features too numerous to remember right now. TERMCAP
3455 # can only take advantage of a few of these added features.
3457 # Note that this entry is are set up in what was the standard way for GNU
3458 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3459 # keys were switched into application mode at the same time the numeric pad
3460 # is switched into application mode. This changes the definitions of the
3461 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3462 # your termcap entry,
3464 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3465 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3466 # also, added <rmam>/<smam> based on the init string -- esr)
3467 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3468 am, eslok, hs, mir, msgr, xenl, xon,
3469 cols#80, it#8, lines#24, vt#3,
3470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3471 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3472 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3473 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3474 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3476 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3477 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3478 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3479 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3480 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3481 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3483 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3484 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3485 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3486 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3487 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3488 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3489 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3490 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3491 %p9%t\E(0%e\E(B%;$<2>,
3492 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3493 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3494 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3496 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3497 # a missing <sc> -- esr)
3498 # add msgr and other capabilities from vt220 -TD
3500 am, mir, msgr, xenl, xon,
3501 cols#80, it#8, lines#24, vt#3,
3502 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3503 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3504 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3505 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3506 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3507 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3508 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3509 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3510 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3511 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3512 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3513 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3514 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3515 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3516 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3517 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3518 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3519 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3520 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3521 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3522 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3523 %p9%t\E(0%e\E(B%;$<2>,
3524 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3525 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3526 use=ansi+pp, use=dec+sl, use=ansi+enq,
3528 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3529 # takes two parameters, the key and the string. Translating the key is
3530 # straightforward (keys 1-5 are not defined on real terminals, though some
3531 # emulators define these):
3533 # if (key < 16) then value = key;
3534 # else if (key < 21) then value = key + 1;
3535 # else if (key < 25) then value = key + 2;
3536 # else if (key < 27) then value = key + 3;
3537 # else if (key < 30) then value = key + 4;
3538 # else value = key + 5;
3540 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3541 # There's no provision in terminfo for emitting a string in this format, so the
3542 # application has to know it.
3544 vt420pc|DEC VT420 w/PC keyboard,
3545 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
3546 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
3547 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
3548 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
3549 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3550 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
3551 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
3552 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
3553 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
3554 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
3555 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
3556 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
3557 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3558 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3559 pctrm=USR_TERM\:vt420pcdos\:,
3560 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3561 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3565 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3567 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3568 %{127}%=%t\E\177%e%p1%c%;,
3570 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3571 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3573 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3574 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3575 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3576 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3577 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3578 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3579 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3584 vt510pc|DEC VT510 w/PC keyboard,
3586 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3591 # The VT520 is a monochrome text terminal capable of managing up to
3592 # four independent sessions in the terminal. It has multiple ANSI
3593 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3594 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3595 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3597 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3598 # [Alt]/[Print Screen] depending upon which keyboard and which
3599 # terminal mode is being used. If Set-Up has been disabled or
3600 # assigned to an unknown key, Set-Up may be entered by pressing
3601 # [F3] as the first key after power up, regardless of keyboard type.
3603 use=ansi+rca, use=vt420, use=ansi+tabs,
3608 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3609 # Keyboard, which replaces the old LK41R-AA keyboard.
3611 # In trying to get the function keys to work, I had to cobble my own
3612 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3613 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3614 # I seem to get them all -Mike Gran
3615 vt520ansi|Boundless VT520 ANSI,
3616 use=ansi+rca, use=vt420f, use=vt220+keypad,
3619 #### VT100 emulations
3622 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3623 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3624 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3625 # that this works best with a stock vt100 entry.
3626 dec-vt100|EWAN telnet's vt100 emulation,
3629 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3630 dec-vt220|DOS tnvt200 terminal emulator,
3633 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3634 # anyone who needs PC VT340 emulation. (or anything below that level, for
3635 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3636 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3637 # I can send the address if requested.
3638 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3639 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3640 z340|zstem vt340 terminal emulator 132col 42line,
3642 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3643 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3644 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3646 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3647 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3649 # CRT is shareware. It implements some xterm features, including mouse.
3650 crt|crt-vt220|CRT 2.3 emulating VT220,
3653 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3655 # PuTTY 0.55 (released 3 August 2004)
3656 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3658 # Comparing with 0.51, vttest is much better (only a few problems with the
3659 # cursor position reports and wrapping).
3661 # PuTTY 0.51 (released 14 December 2000)
3663 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3664 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3665 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3666 # to xterm, which is incorrect, since several features are misimplemented:
3668 # Alt+key always sends ESC+key, so 'km' capability is removed.
3670 # Control responses, wrapping and tabs are buggy, failing a couple of
3671 # screens in vttest.
3673 # xterm mouse support is not implemented (unrelease version may).
3675 # Several features such as backspace/delete are optional; this entry documents
3676 # the default behavior -TD
3678 putty|PuTTY terminal emulator,
3679 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3680 colors#8, it#8, ncv#22, pairs#64, U8#1,
3681 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3682 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3683 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3684 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3685 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3686 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3687 dch=\E[%p1%dP, dch1=\E[P,
3688 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3689 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3690 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3691 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3692 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3693 %%G\340\202\242\E%%@%e%p1%c%;,
3694 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3695 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3696 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3697 il1=\E[L, ind=^J, indn=\E[%p1%dS,
3698 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3699 %02x%p4%{255}%*%{1000}%/%02x,
3700 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3701 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=\177, kcbt=\E[Z,
3702 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3703 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3704 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3705 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3706 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3707 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3708 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3709 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3710 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3711 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3712 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3713 %;m%?%p9%t\016%e\017%;,
3714 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3715 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3716 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3717 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3718 vt100-putty|Reset PuTTY to pure vt100,
3719 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3721 putty-256color|PuTTY 0.58 with xterm 256-colors,
3722 use=xterm+256setaf, use=putty,
3723 putty-noapp|putty with cursor keys in normal mode,
3724 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3725 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3728 # One of the keyboard selections is "VT100+".
3729 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3730 putty-vt100|VT100+ keyboard layout,
3731 use=putty+fnkeys+vt100, use=putty,
3733 putty-sco|putty with SCO function keys,
3734 use=putty+fnkeys+sco, use=putty,
3736 # PuTTY has more than one section in its Keyboard configuration:
3737 # a) backspace/delete, which we ignore since that choice largely depends on
3738 # whether one matches Unix and BSD or Linux.
3739 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3740 # are unrelated to rxvt's actual settings.
3741 # c) function keys and keypad - this is the interesting part. None of the
3742 # selections match any of their respective namesakes, but they are shown
3743 # here to help users who expect that the selections do what is implied.
3745 # This is the default setting for PuTTY
3746 putty+fnkeys|fn-keys for PuTTY,
3747 use=putty+fnkeys+esc,
3749 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3750 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3751 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3752 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3753 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3754 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3756 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3757 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3758 use=putty+fnkeys+esc,
3760 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3761 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3762 use=putty+fnkeys+esc,
3764 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3765 use=putty+fnkeys+esc,
3767 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3769 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3770 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3771 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3772 kf9=\EOX, use=putty+fnkeys+esc,
3774 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3776 # Use modifiers to obtain function keys past 12:
3779 # F25-F36 - control/alt
3780 # F37-F48 - control/shift
3782 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3783 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3784 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3785 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3786 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3787 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3788 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3789 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3790 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3791 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3792 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3793 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3794 kich1=\E[L, knp=\E[G, kpp=\E[I,
3796 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3797 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3798 # (communication program) which supports:
3800 # - Serial port connections.
3801 # - TCP/IP (telnet) connections.
3802 # - VT100 emulation, and selected VT200/300 emulation.
3803 # - TEK4010 emulation.
3804 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3806 # - Scripts using the "Tera Term Language".
3807 # - Japanese and Russian character sets.
3809 # The program does not come with terminfo or termcap entries. However, the
3810 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3811 # vt52 or doublesize character support; blinking is done with color). Besides
3812 # the HPA, VPA extensions it also implements CPL and CNL.
3814 # All of the function keys can be remapped. This description shows the default
3815 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3816 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3817 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3825 # ANSI colors are implemented, but cannot be combined with video attributes
3826 # except for reverse.
3828 # No fonts are supplied with the program, so the acsc string is chosen to
3829 # correspond with the default Microsoft terminal font.
3831 # Tera Term recognizes some xterm sequences, including those for setting and
3832 # retrieving the window title, and for setting the window size (i.e., using
3833 # "resize -s"), though it does not pass SIGWINCH to the application if the
3834 # user resizes the window with the mouse.
3835 teraterm2.3|Tera Term Pro,
3838 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3839 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3840 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3841 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3842 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3843 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3844 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3845 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3846 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3847 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3848 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3849 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3850 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3851 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3852 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3853 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3854 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3855 use=klone+color, use=vt100,
3857 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3858 # to choose a Windows OEM font).
3860 # Testing with tack:
3861 # - it does not have xenl (suppress that)
3862 # - underline seems to work with color (modify ncv).
3863 # Testing with vttest:
3864 # - wrapping differs from vt100 (menu 1).
3865 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3867 # - it recognizes the dtterm window controls for reporting size in
3868 # characters and pixels.
3869 # - it passes SIGWINCH.
3870 teraterm4.59|Tera Term Pro,
3873 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3874 kmous=\E[M, use=teraterm2.3,
3879 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3880 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3883 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3884 # for casual (occasional) use. Also fails several of the vttest screens,
3885 # but that is not unusual for vt100 "emulators".
3886 # b) Does not implement vt100 keypad
3887 # c) Recognizes a subset of vt52 controls.
3888 ms-vt100|MS telnet imitating dec vt100,
3890 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3891 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3892 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3893 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3894 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3896 # Tested with Windows 2000, the telnet application runs in a console window,
3897 # also using 'Terminal' font.
3900 # a) This version has no function keys or numeric keypad. Unlike the older
3901 # version, the numeric keypad is entirely ignored.
3902 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3903 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3905 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3908 # Based on comments from Federico Bianchi:
3910 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3911 # scheme for PF keys.
3913 # and PuTTY wishlist:
3915 # The modifiers are represented as the codes listed above, prefixed to
3916 # the normal sequences. If the modifier is pressed alone, its sequence
3917 # is transmitted twice in succession. If multiple modifiers apply,
3918 # they're transmitted in the order shift, control, alt.
3923 ms-vt100+|vt100+|windows XP vt100+ (sic),
3924 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3925 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3926 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3927 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3928 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3929 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3930 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3931 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3932 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3933 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3934 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3935 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3936 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3937 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3938 knp=\E/, kpp=\E?, use=ms-vt100-color,
3940 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3943 # expect-5.44.1.15/example/tkterm
3944 # a minimal subset of a vt100 (compare with "news-unk).
3946 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3947 tt|tkterm|Don Libes' tk text widget terminal emulator,
3948 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3949 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3950 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3951 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3954 ######## X TERMINAL EMULATORS
3957 # You can add the following line to your .Xdefaults to change the terminal type
3958 # set by the xterms you start up to my-xterm:
3960 # *termName: my-xterm
3962 # System administrators can change the default entry for xterm instances
3963 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3964 # case, xterm will detect and reject an invalid terminal type, falling back
3965 # to the default of xterm.
3968 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3969 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3970 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3971 # as these seem not to work -- esr)
3972 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3973 OTbs, am, km, mir, msgr, xenl, xon,
3974 cols#80, it#8, lines#65,
3975 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3976 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3977 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3978 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3979 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3980 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3981 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3982 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3983 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3984 smso=\E[7m, smul=\E[4m,
3985 # Compatible with the R5 xterm
3986 # (from the XFree86 3.2 distribution, <blink=@> removed)
3987 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3988 # corrected typos in rs2 string - TD
3990 xterm-r5|xterm R5 version,
3991 OTbs, am, km, msgr, xenl,
3992 cols#80, it#8, lines#24,
3993 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3994 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3995 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3996 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3997 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3998 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3999 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4000 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
4001 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
4002 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4003 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4004 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
4005 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
4006 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
4008 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4010 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4012 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4013 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4014 # Compatible with the R6 xterm
4015 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4016 # added khome/kend, hts based on the R6 xterm code - TD
4017 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4018 # for compatibility with other emulators).
4019 xterm-r6|xterm X11R6 version,
4020 OTbs, am, km, mir, msgr, xenl,
4021 cols#80, it#8, lines#24,
4022 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4023 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4024 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4025 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4026 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4027 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4028 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4030 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
4031 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4032 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4033 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4034 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4035 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4036 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4037 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4038 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4039 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4040 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4041 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4042 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4043 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4045 xterm-old|antique xterm version,
4047 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4048 # The name has been changed and some aliases have been removed.
4049 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4050 OTbs, am, bce, km, mir, msgr, xenl, XT,
4051 cols#80, it#8, lines#24, ncv@,
4052 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4053 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4054 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4055 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4056 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4057 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4058 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4059 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4060 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4061 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4063 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4064 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4065 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
4066 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4067 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
4068 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
4069 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4070 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
4071 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
4072 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
4073 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
4074 rmso=\E[27m, rmul=\E[24m, rs1=^O,
4075 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
4076 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4078 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4080 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4081 %;m%?%p9%t\016%e\017%;,
4082 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4083 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4084 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
4085 use=ecma+color, use=vt220+keypad,
4087 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4088 # codes for F1-F4 except while in VT220 mode.
4089 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4090 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4092 # This version was released in XFree86 3.3.3 (November 1998).
4093 # Besides providing printer support, it exploits a new feature that allows
4094 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4095 # -- the distribution contained incorrect khome/kend values -TD
4096 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4097 blink=\E[5m, ich1@, invis=\E[8m,
4098 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4099 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4100 rs2=\E[!p\E[?3;4l\E[4l\E>,
4101 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4102 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4103 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4106 # This version was released in XFree86 4.0.
4107 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4109 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4110 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4111 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4112 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4113 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4114 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4115 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4116 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4117 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4118 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4119 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4120 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4121 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4122 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4123 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4125 smcup=\E[?1049h, use=xterm-xf86-v333,
4127 # This version was released in XFree86 4.3.
4128 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4129 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4130 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4132 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4133 %p7%t;8%;m%?%p9%t\016%e\017%;,
4136 # This version was released in XFree86 4.4.
4137 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4138 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4139 rin=\E[%p1%dT, use=xterm-xf86-v43,
4141 xterm-xfree86|xterm terminal emulator (XFree86),
4144 # This version reflects the current xterm features.
4145 xterm-new|modern xterm terminal emulator,
4147 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4148 rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,
4149 use=xterm+tmux, use=xterm-basic,
4151 # This fragment is for people who cannot agree on what the backspace key
4153 xterm+kbs|fragment for backspace key,
4156 # This fragment describes as much of XFree86 xterm's "pc-style" function
4157 # keys as will fit into terminfo's 60 function keys.
4160 # ---------------------------------
4167 # 8 Shift + Alt + Control
4168 # ---------------------------------
4169 # The meta key may also be used as a modifier in this scheme, adding another
4170 # bit to the parameter.
4171 xterm+pcfkeys|fragment for PC-style fkeys,
4172 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4175 xterm+noapp|fragment with cursor keys in normal mode,
4176 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4179 xterm+app|fragment with cursor keys in application mode,
4180 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4183 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4184 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4185 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4187 # The original assignments from patch #94 for cursor-keys had some technical
4190 # A parameter for a function-key to represent a modifier is just more
4191 # bits. But for a cursor-key it may change the behavior of the
4192 # application. For instance, emacs decodes the first parameter of a
4193 # cursor-key as a repeat count.
4195 # A parameterized string should (really) not begin with SS3 (\EO).
4196 # Rather, CSI (\E[) should be used.
4198 # For these reasons, the original assignments were deprecated. For
4199 # compatibility reasons, they are still available as a setting of xterm's
4200 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4201 # that might apply to xterm+pcfkeys with different values of that resource.
4202 xterm+pcc3|fragment with modifyCursorKeys:3,
4203 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4204 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4205 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4206 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4207 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4208 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4209 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4210 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4213 xterm+pcc2|fragment with modifyCursorKeys:2,
4214 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4215 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4216 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4217 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4218 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4219 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4220 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4222 xterm+pcc1|fragment with modifyCursorKeys:1,
4223 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4224 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4225 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4226 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4227 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4228 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4230 xterm+pcc0|fragment with modifyCursorKeys:0,
4231 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4232 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4233 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4234 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4235 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4236 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4239 # Here are corresponding fragments from xterm patch #216:
4241 xterm+pcf0|fragment with modifyFunctionKeys:0,
4242 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4243 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4244 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4245 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4246 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4247 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4248 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4249 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4250 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4251 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4252 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4253 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4254 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4255 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4256 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4257 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4258 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4260 xterm+pcf2|fragment with modifyFunctionKeys:2,
4261 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4262 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4263 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4264 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4265 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4266 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4267 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4268 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4269 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4270 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4271 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4272 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4273 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4274 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4275 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4276 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4277 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4278 kf8=\E[19~, kf9=\E[20~,
4280 # Chunks from xterm #230:
4281 xterm+pce2|fragment with modifyCursorKeys:2,
4282 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4283 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4284 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4285 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4286 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4287 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4288 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4289 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4290 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4291 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4292 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4295 xterm+edit|fragment for 6-key editing-keypad,
4296 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4299 xterm+pc+edit|fragment for pc-style editing keypad,
4300 kend=\E[4~, khome=\E[1~,
4302 xterm+vt+edit|fragment for vt220-style editing keypad,
4303 kfnd=\E[1~, kslt=\E[4~,
4306 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4307 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4308 # is shown here (because that is used in mrxvt and mlterm):
4309 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4310 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4311 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4312 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4313 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4314 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4315 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4316 kf63=\E[13;4~, use=xterm+pcf2,
4318 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4319 xterm-basic|modern xterm terminal emulator - common,
4320 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4321 colors#8, cols#80, it#8, lines#24, pairs#64,
4322 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4323 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4324 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
4325 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4326 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4327 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4328 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4329 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4330 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4331 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4332 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
4333 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4334 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4335 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4336 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4337 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4338 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4339 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4341 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4343 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4344 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4345 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4346 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4347 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4348 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
4351 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4352 # In retrospect, something like xterm-r6 was intended here -TD
4353 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4354 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4356 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4359 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4360 # xterm also recognizes the control sequences for initc -TD
4361 xterm-16color|xterm with 16 colors like aixterm,
4363 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4364 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4365 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4368 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4369 # xterm patch #111 (1999/7/10) -TD
4370 xterm+256color|xterm 256-color feature,
4372 colors#256, pairs#32767,
4373 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4374 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4376 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4378 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4382 # palette is hardcoded...
4383 xterm+256setaf|xterm 256-color (set-only),
4385 colors#256, pairs#32767,
4387 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4389 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4393 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4394 # xterm patch #115 (1999/9/18) -TD
4396 # Note that the escape sequences used are the same as for 256-colors - xterm
4397 # has a different table of default color resource values. If built for
4398 # 256-colors, it can still handle an 88-color palette by using the initc
4401 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4402 # which support the xterm+256color feature support the associated initc
4403 # capability. So it is cancelled in the entries which use this and/or the
4404 # xterm+256color block.
4406 # The default color palette for the 256- and 88-colors are different. A
4407 # given executable will have one palette (perhaps compiled-in). If the program
4408 # supports xterm's control sequence, it can be programmed using initc.
4409 xterm+88color|xterm 88-color feature,
4410 colors#88, pairs#7744, use=xterm+256color,
4412 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4413 xterm-256color|xterm with 256 colors,
4414 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4415 xterm-88color|xterm with 88 colors,
4416 rs1=\Ec\E]104\007, use=xterm+88color,
4419 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4420 # asked for some of xterm's advanced features to be added to its terminfo
4421 # entry. It defines extended capabilities not found in standard terminfo or
4422 # termcap. These are useful in tmux, for instance, hence the name.
4424 # One caveat in adding extended capabilities in ncurses is that if the names
4425 # are longer than two characters, then they will not be visible through the
4426 # termcap interface.
4428 # Ms modifies the selection/clipboard. Its parameters are
4429 # p1 = the storage unit (clipboard, selection or cut buffer)
4430 # p2 = the base64-encoded clipboard content.
4432 # Ss is used to set the cursor style as described by the DECSCUSR
4433 # function to a block or underline.
4434 # Se resets the cursor style to the terminal power-on default.
4436 # Cs and Cr set and reset the cursor colour.
4437 xterm+tmux|advanced xterm features used in tmux,
4438 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4439 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4441 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4442 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4443 # To use it, your decTerminalID resource must be set to 200 or above.
4450 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4451 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4452 colors#8, cols#80, it#8, lines#24, pairs#64,
4453 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4454 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4455 civis=\233?25l, clear=\233H\2332J,
4456 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
4457 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
4458 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4459 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4460 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4461 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4462 flash=\233?5h$<100/>\233?5l, home=\233H,
4463 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4464 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
4465 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4467 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4468 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4469 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4470 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4471 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4472 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4473 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4474 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4475 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4476 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4477 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4478 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4479 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4481 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4483 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4484 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4485 %{6}%=%t3%e%p1%d%;m,
4486 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4487 %{6}%=%t3%e%p1%d%;m,
4488 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4489 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4490 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4491 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4492 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4493 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4496 xterm-hp|xterm with hpterm function keys,
4497 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4498 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4499 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4500 knp=\ES, kpp=\ET, use=xterm-basic,
4502 xterm-sco|xterm with SCO function keys,
4503 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4504 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4505 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4506 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4507 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4508 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4509 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4510 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4511 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4512 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4513 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4514 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4517 # The xterm-new description has all of the features, but is not completely
4518 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4519 # sunKeyboard resource to true:
4520 # + maps the editing keypad
4521 # + interprets control-function-key as a second array of keys, so a
4522 # 12-fkey keyboard can support vt220's 20-fkeys.
4523 # + maps numeric keypad "+" to ",".
4524 # + uses DEC-style control sequences for the application keypad.
4526 xterm-vt220|xterm emulating vt220,
4527 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4528 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4529 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4530 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4531 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4532 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4533 use=xterm+app, use=xterm+edit, use=xterm-basic,
4536 xterm-vt52|xterm emulating dec vt52,
4537 cols#80, it#8, lines#24,
4538 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4539 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
4540 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4541 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4542 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
4545 xterm-noapp|xterm with cursor keys in normal mode,
4546 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4549 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4550 lines#24, use=xterm-old,
4552 # This is xterm for ncurses.
4553 xterm|xterm terminal emulator (X Window System),
4556 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4557 # setting the vt100Graphics resource to false.
4558 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4561 # These building-blocks allow access to the X titlebar and icon name as a
4562 # status line. There are a few problems in using them in entries:
4564 # a) tsl should have a parameter to denote the column on which to transfer to
4566 # b) the "0" code for xterm updates both icon-title and window title. Some
4567 # window managers such as twm (and possibly window managers descended from
4568 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4569 # don't want to mess with icon-name when using those window managers.
4571 # The extension "TS" is preferable, because it does not accept a parameter.
4572 # However, if you are using a non-extended terminfo, "TS" is not visible.
4573 xterm+sl|access X title line and icon name,
4575 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4576 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4578 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4580 # In contrast, this block can be used for a DEC vt320 and up. There are two
4583 # DECSASD (select active status display)
4584 # \E[0$} Main display
4585 # \E[1$} Status line
4587 # DECSSDT (select status line type)
4588 # \E[0$~ No status line
4589 # \E[1$~ Indicator status line
4590 # \E[2$~ Host-writable status line
4592 # The building block assumes that the terminal always shows something at the
4593 # status line (either the indicator, or status line). That is because if no
4594 # status line is used, then the terminal makes that line part of the user
4595 # window, changing its size without notice.
4597 # Because there is no "esl" (enable status line) capability, the "tsl"
4598 # capability ensures that the status line is host-writable. A DEC terminal
4599 # will clear the status line when changing from indicator to host-writable
4602 # Once on the status line, the row part of cursor addressing is ignored. Since
4603 # tsl expects a parameter (to specify the column), the shortest addressing that
4604 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4606 dec+sl|DEC VTxx status line,
4608 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4611 # The following xterm variants don't depend on your base version
4613 # xterm with bold instead of underline
4614 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4615 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4617 smso=\E[7m, smul=\E[1m, use=xterm-old,
4619 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4620 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4621 ich@, ich1@, use=xterm,
4622 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4623 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4624 rmcup@, smcup@, use=xterm,
4627 # The xterm mouse protocol is used by other terminal emulators.
4628 # In this section, two extended capabilities are used to illustrate the mouse
4629 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4630 # enabling/disabling other mouse protocols. The "xm" capability describes the
4631 # mouse response; currently there is no interpreter which would use this
4632 # information to make the mouse support completely data-driven.
4634 # Here is the "original" xterm mouse protocol.
4636 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4637 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4638 # sequence", referring to the fact that it does not correspond to a "real"
4639 # terminal. The mouse responses for the X10 protocol are sent only for
4641 xterm+x10mouse|X10 xterm mouse protocol,
4642 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4643 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4644 xterm-x10mouse|X10 xterm mouse,
4645 use=xterm+x10mouse, use=xterm,
4647 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4650 # The mouse responses for the X11 protocol covered button releases, as well as
4653 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4656 # The modifiers are not reflected in this description because as used in xterm
4657 # they are normally inaccessible because the translations resources assign
4658 # shift and control to other features. However, they are important because
4659 # they take up space in the first byte of the response. The other bits of this
4660 # byte are used to encode the button number for both presses and releases.
4661 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4662 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4663 # provide additional features, e.g., wheel mouse.
4665 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4666 # "t" or "T", which was activated by double-clicking. The "t" response was
4667 # used when the starting/ending positions were the same.
4669 # X11R3 (February 1988) added the highlight/tracking mode.
4671 # X11R4 (December 1989) added the control sequences document, listing the
4672 # control sequences for the X10/X11 protocols without descriptions. It also
4673 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4674 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4676 # X11R5 (November 1993) gave a description of the mouse protocol.
4678 # X11R6 (January 1995) moved the control sequences document out of the xterm
4679 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4680 # no new information.
4681 xterm+x11mouse|X11 xterm mouse protocol,
4682 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4683 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4684 xterm-x11mouse|X11 mouse,
4685 use=xterm+x11mouse, use=xterm,
4687 # Here is a suggested description of the xterm highlighting protocol.
4688 # A more complicated example could be constructed to account for the "t"
4690 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4691 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4692 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4694 xterm-x11hilite|X11 mouse with highlight,
4695 use=xterm+x11mouse, use=xterm,
4697 # The preceding were the sources from X Consortium. Other sources (or patches)
4698 # were available. Starting in mid-1995, XFree86 developers collected some of
4699 # those changes and began improvements, e.g., to support color. This was, by
4700 # the way, around the same time that rxvt developers began implementing color,
4701 # though dates (and attributions) are not well documented. I became interested
4702 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4703 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4705 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4706 # "any-event" mouse mode.
4707 xterm+sm+1002|xterm any-event mouse,
4708 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4709 xterm-1002|xterm any-event mouse,
4710 use=xterm+sm+1002, use=xterm,
4712 xterm+sm+1003|testing xterm-mouse,
4713 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
4715 xterm-1003|testing xterm-mouse,
4716 use=xterm+sm+1003, use=xterm,
4718 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
4721 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
4722 # dropping support for the X11 mouse protocol's shift-modifier and using
4723 # available bits in the first byte of the response to encode buttons 4 and 5.
4724 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
4725 # older configurations which might have used the obsolete modifiers.
4727 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
4728 # where the coordinates in the mouse response would be encoded in UTF-8,
4729 # thereby extending the range of coordinates past 222=(255-33). This is the
4730 # "1005" mouse mode.
4731 xterm+sm+1005|xterm UTF-8 mouse,
4732 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
4733 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
4734 xterm-1005|xterm UTF-8 mouse,
4735 use=xterm+sm+1005, use=xterm,
4737 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
4738 # SGR-style parameters.
4740 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
4741 # (By the way, this is a problem with the X11 protocol). A more plausible
4742 # criticism is that the responses provided by the 1005 mode are not distinct
4743 # from the non-1005 responses.
4745 # As an alternative (and fixing the longstanding limitation of X11 mouse
4746 # protocol regarding button-releases), I provided this:
4747 xterm+sm+1006|xterm SGR-mouse,
4748 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
4749 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
4750 xterm-1006|xterm SGR-mouse,
4751 use=xterm+sm+1006, use=xterm,
4754 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4755 # (kterm should not invoke DEC Graphics as the alternate character set
4756 # -- Kenji Rikitake)
4757 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4758 # -- MATSUMOTO Shoji)
4759 # kterm implements acsc via built-in table of X Drawable's
4760 kterm|kterm kanji terminal emulator (X window system),
4763 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4764 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4765 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4766 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
4768 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4769 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4770 kterm-color|kterm-co|kterm with ANSI colors,
4771 ncv@, use=kterm, use=ecma+color,
4774 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4775 # variant of xterm which is apparently no longer supported, but are interesting
4776 # because they illustrate SVr4 curses mouse controls - T.Dickey
4777 xtermm|xterm terminal emulator (monocrome),
4778 OTbs, am, km, mir, msgr, xenl,
4779 btns#3, cols#80, it#8, lines#24,
4780 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4781 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4782 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4783 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4784 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4785 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4786 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4787 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4788 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4789 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4790 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4791 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4792 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4793 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4794 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4795 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4796 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4797 %;m%?%p9%t\016%e\017%;,
4798 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4799 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4801 xtermc|xterm terminal emulator (color),
4802 colors#8, ncv#7, pairs#64,
4803 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4804 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4806 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4810 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4811 # Here's a termcap entry I've been using for xterm_color, which comes
4812 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4813 # color stuff, I also have a status line defined as the window manager
4814 # title bar. [I have translated it to terminfo -- ESR]
4815 xterm-pcolor|xterm with color used for highlights and status line,
4817 bold=\E[1;43m, rev=\E[7;34m,
4818 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
4819 %t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
4820 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4822 # This describes the capabilities of color_xterm, an xterm variant from
4823 # before ECMA-64 color support was folded into the main-line xterm release.
4824 # This entry is straight from color_xterm's maintainer.
4825 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4826 # The README's with the distribution also say that it supports SGR 21, 24, 25
4827 # and 27, but they are not present in the terminfo or termcap.
4828 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4829 OTbs, am, km, mir, msgr, xenl, XT,
4830 cols#80, it#8, lines#65, ncv@,
4831 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4832 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4833 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4834 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4835 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4836 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4837 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4838 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4839 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4840 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4841 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4842 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4843 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4844 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4845 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4846 rmso=\E[27m, rmul=\E[24m,
4847 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4849 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4850 %;m%?%p9%t\016%e\017%;,
4851 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4852 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4853 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4855 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4856 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4857 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4858 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4859 # that each of those implements the home, end, delete keys differently.
4861 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4862 # colors; note that this is not compatible with the 5.2 version.
4863 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4864 # match XFree86's xterm.terminfo usage and prevent circular links
4865 xterm-color|nxterm|generic color xterm,
4867 op=\E[m, use=xterm-r6, use=klone+color,
4869 # This entry describes an xterm with Sun-style function keys enabled
4870 # via the X resource setting "xterm*sunFunctionKeys:true"
4871 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4872 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4873 # because we want it to be seen as <kcpy>.
4874 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4875 # with their Sun keyboard labels instead.
4876 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4877 xterm-sun|xterm with sunFunctionKeys true,
4878 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4879 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4880 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4881 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4882 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4883 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4884 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4885 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4886 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4887 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4888 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4889 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4891 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4892 cols#80, lines#24, use=xterm-sun,
4895 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4896 gnome-rh62|Gnome terminal,
4898 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4901 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4903 # This implements a subset of vt102 with a random selection of features from
4904 # other terminals such as color and function-keys.
4906 # shift-f1 to shift-f10 are f11 to f20
4908 # NumLock changes the application keypad to approximate vt100 keypad, except
4909 # that there is no escape sequence matching comma (,).
4911 # Other defects observed:
4912 # vt100 LNM mode is not implemented.
4913 # vt100 80/132 column mode is not implemented.
4914 # vt100 DECALN is not implemented.
4915 # vt100 DECSCNM mode is not implemented, so flash does not work.
4916 # vt100 TBC (tab reset) is not implemented.
4917 # xterm alternate screen controls do not restore cursor position properly
4918 # it hangs in tack after running function-keys test.
4919 gnome-rh72|GNOME Terminal,
4921 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4922 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4923 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
4925 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4927 # GNOME Terminal 2.0.1 (Redhat 8.0)
4929 # Documentation now claims it implements vt220 (which is demonstrably false).
4930 # However, it does implement ECH, which is a vt220 feature. And there are
4931 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4932 # more of its bugs using vttest.
4934 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4935 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4937 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4938 # operations. Shift-tab generates a distinct sequence so it can be argued
4939 # that it implements kcbt.
4940 gnome-rh80|GNOME Terminal,
4942 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4943 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4945 # GNOME Terminal 2.2.1 (Redhat 9.0)
4947 # bce and msgr are repaired.
4948 gnome-rh90|GNOME Terminal,
4950 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4951 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4952 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4955 # GNOME Terminal 2.14.2 (Fedora Core 5)
4956 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4957 gnome-fc5|GNOME Terminal,
4959 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
4961 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4963 # GNOME Terminal 2.18.1 (2007 snapshot)
4965 # For any "recent" version of gnome-terminal, it is futile to attempt to
4966 # support modifiers on cursor- and keypad keys because the program usually
4967 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4968 # of the keys (which more/less correspond to the termcap values), and will
4969 # interpret those according to the $TERM value, but others not in the
4970 # terminfo according to some constantly changing set of hacker guidelines -TD
4971 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4972 use=xterm+pcc2, use=gnome-fc5,
4973 gnome-2007|GNOME Terminal snapshot 2.18.1,
4976 # GNOME Terminal 2.22.3 (2008 snapshot)
4978 # In vttest, it claims to be a vt220 with national replacement character-sets,
4979 # but aside from the identifier string, implements only a small fraction of
4980 # vt220's behavior, which will make it less usable on a VMS system (unclear
4981 # what the intent of the developer is, since the NRC feature exposed in vttest
4982 # by this change does not work).
4983 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4984 use=vte+pcfkeys, use=vte-2007,
4985 gnome-2008|GNOME Terminal snapshot 2.22.3,
4988 # GNOME Terminal 3.6.0 (2012)
4989 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
4990 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
4993 # Testing with tack shows that flash does not/has not worked -TD
4994 vte-2012|VTE 0.34.1,
4996 dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
4997 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
4998 %|%t;7%;m%?%p9%t\016%e\017%;,
4999 sitm=\E[3m, use=vte-2008,
5000 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5001 # 61 differences from a correct entry for gnome terminal.
5002 gnome-2012|GNOME Terminal 3.6.0,
5005 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
5006 # supply key information which is not built into the program. With 2.22.3,
5007 # this list is built into the program (which addresses the inadvertant use of
5008 # random terminfo data, though using a set of values which does not correspond
5009 # to any that xterm produces - still not solving the problem that GNOME
5010 # terminal hardcodes the $TERM variable as "xterm").
5012 # terminfo modifier code keys
5013 # kf13-kf24 shift 2 F1 to F12
5014 # kf25-kf36 control 5 F1 to F12
5015 # kf37-kf48 shift/control 6 F1 to F12
5016 # kf49-kf60 alt 3 F1 to F12
5017 # kf61-kf63 shift-alt 4 F1 to F3
5019 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5020 # no parameters. This appears to be rote copying based on xterm+pcc0.
5021 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5022 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5023 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5024 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5025 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5026 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5027 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5029 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5032 # deprecated - use "vte" for newer versions
5033 gnome|GNOME Terminal,
5036 # relevant changes were made in January 2014, and later.
5037 vte-2014|VTE 0.35.1,
5039 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5040 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5041 rmso=\E[27m, rmul=\E[24m, use=xterm+pcfkeys,
5044 vte|VTE aka GNOME Terminal,
5047 vte-256color|VTE with xterm 256-colors,
5048 use=xterm+256color, use=vte,
5049 gnome-256color|GNOME Terminal with xterm 256-colors,
5052 # XFCE Terminal 0.2.5.4beta2
5054 # This is based on some of the same source code, e.g., the VTE library, as
5055 # gnome-terminal, but has fewer features, fails more screens in vttest.
5056 # Since most of the terminfo-related behavior is due to the VTE library,
5057 # the terminfo is the same as gnome-terminal.
5062 # Multi-Gnome-Terminal 1.6.2
5064 # This does not use VTE, and does have different behavior (compare xfce and
5066 mgt|Multi GNOME Terminal,
5067 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5070 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5071 # or not is debatable).
5074 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
5077 # (formerly known as kvt)
5079 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5080 # simplify this entry (and point out why konsole isn't xterm), we base this on
5081 # xterm-r6. The default keyboard appears to be 'linux'.
5084 # a) konsole implements several features from XFree86 xterm, though none of
5085 # that is documented - except of course in its source code - apparently
5086 # because its implementors are unaccustomed to reading documentation - as
5087 # evidenced by the sparse and poorly edited documentation distributed with
5088 # konsole. Some features such as the 1049 private mode are recognized but
5089 # incorrectly implemented as a duplicate of the 47 private mode.
5090 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5091 # sends PC-style escapes rather than vt100.
5092 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5093 # parse some control sequences. Also fails vttest Primary Device Attributes
5094 # by sending a bogus code (in the source it says it's supposed to be a
5095 # vt220, which is doubly incorrect because it does not implement vt220
5096 # control sequences except for a few special cases). Treat it as a
5097 # mildly-broken vt102.
5099 # Update for konsole 1.3.2:
5100 # The 1049 private mode works (but see the other xterm screens in vttest).
5101 # Primary Device Attributes now returns the code for a vt100 with advanced
5102 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5104 # Updated for konsole 1.6.4:
5105 # add konsole-solaris
5107 # Updated for konsole 1.6.6:
5108 # add control-key modifiers for function-keys, etc.
5110 # Updated for konsole 2.12.4:
5113 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5114 # different from xterm (and vt100's). They have the same behavior in this
5115 # detail, but it is unclear which copies the other.
5116 konsole-base|KDE console window,
5119 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
5120 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5121 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
5122 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
5123 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
5124 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
5125 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5126 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5127 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5129 sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
5130 use=ecma+color, use=xterm-r6,
5131 konsole-linux|KDE console window with linux keyboard,
5132 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5133 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5134 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5135 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5136 konsole-solaris|KDE console window with Solaris keyboard,
5137 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5138 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
5139 # than testing the code.
5140 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5141 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5142 # The value for kbs reflects local customization rather than the settings used
5143 # for XFree86 xterm.
5144 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5145 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5147 # Konsole does not implement shifted cursor-keys.
5148 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5149 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
5151 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5152 # it is still useful for deriving the other entries.
5153 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5154 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5155 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5156 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5157 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5158 khome=\E[H, use=konsole-base,
5159 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5160 kbs=^H, kdch1=\177, use=konsole-vt100,
5161 konsole-16color|klone of xterm-16color,
5162 ncv#32, use=ibm+16color, use=konsole,
5163 # make a default entry for konsole
5164 konsole|KDE console window,
5167 konsole-256color|KDE console window with xterm 256-colors,
5168 use=xterm+256setaf, use=konsole,
5171 # http://mlterm.sourceforge.net/
5173 mlterm|multi lingual terminal emulator,
5176 # Tested mlterm 3.2.2:
5177 # mlterm 3.x has made changes, but they are not reflected in the included
5178 # mlterm.ti; this entry is based on testing with tack and vttest -TD
5179 mlterm3|multi lingual terminal emulator,
5180 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5181 ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
5182 use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
5184 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5186 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5189 # The function keys are numbered based on shift/control/alt modifiers, except
5190 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5191 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5192 # how it is configured.
5194 # kf1 to kf12 \E[11~ to \E[24~
5195 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5196 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5197 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5198 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5199 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5200 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5201 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5203 mlterm2|multi lingual terminal emulator,
5204 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5205 colors#8, cols#80, it#8, lines#24, pairs#64,
5206 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5207 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5208 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5209 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5210 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5211 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5212 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5213 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5214 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5215 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
5216 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
5217 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5218 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
5219 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
5220 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
5221 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5222 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
5223 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5224 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5225 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5226 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5228 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5229 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5230 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5231 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5233 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5234 # looks in its termcap to decide which string to send. If it used terminfo
5235 # (when available), it could use the extended names introduced for xterm.
5236 mlterm+pcfkeys|fragment for PC-style fkeys,
5237 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5238 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5239 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5240 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5241 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5242 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5243 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5244 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5245 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5247 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5248 use=xterm+256color, use=mlterm,
5251 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5252 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5255 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5256 # but some applications don't work with that.
5257 # It also has an AIX extension
5261 # but the latter does not work correctly.
5263 # The distributed terminfo says it implements hpa and vpa, but they are not
5264 # implemented correctly, using relative rather than absolute positioning.
5266 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5267 # Since rxvt is not really compatible with xterm, it should be configured as
5268 # "rxvt" or "rxvt-color".
5270 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5271 # remove km as per tack test -TD
5272 rxvt-basic|rxvt terminal base (X Window System),
5273 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5274 cols#80, it#8, lines#24,
5275 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5276 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5277 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5278 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5279 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5280 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5281 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5282 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5283 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5284 il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
5285 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5286 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5287 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5289 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5290 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5292 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5293 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5295 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5296 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5297 use=rxvt+pcfkeys, use=vt220+keypad,
5298 # Key Codes from rxvt reference:
5300 # Note: Shift + F1-F10 generates F11-F20
5302 # For the keypad, use Shift to temporarily override Application-Keypad
5303 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5304 # is off, escape sequences toggle Application-Keypad setting.
5305 # Also note that values of Home, End, Delete may have been compiled
5306 # differently on your system.
5308 # Normal Shift Control Ctrl+Shift
5309 # Tab ^I ESC [ Z ^I ESC [ Z
5310 # BackSpace ^H ^? ^? ^?
5311 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5312 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5313 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5314 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5315 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5316 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5317 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5318 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5319 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5320 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5321 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5322 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5323 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5324 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5325 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5326 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5327 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5328 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5329 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5330 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5331 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5332 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5333 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5334 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5335 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5336 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5337 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5338 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5339 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5342 # Up ESC [ A ESC [ a ESC O a ESC O A
5343 # Down ESC [ B ESC [ b ESC O b ESC O B
5344 # Right ESC [ C ESC [ c ESC O c ESC O C
5345 # Left ESC [ D ESC [ d ESC O d ESC O D
5346 # KP_Enter ^M ESC O M
5347 # KP_F1 ESC O P ESC O P
5348 # KP_F2 ESC O Q ESC O Q
5349 # KP_F3 ESC O R ESC O R
5350 # KP_F4 ESC O S ESC O S
5351 # XK_KP_Multiply * ESC O j
5352 # XK_KP_Add + ESC O k
5353 # XK_KP_Separator , ESC O l
5354 # XK_KP_Subtract - ESC O m
5355 # XK_KP_Decimal . ESC O n
5356 # XK_KP_Divide / ESC O o
5368 # The source-code for rxvt actually defines mappings for F21-F35, using
5369 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5370 # are rare, so this entry uses the shift- and control-modifiers as in
5371 # xterm+pcfkeys to define keys past F12.
5373 # kIC is normally not used, since rxvt performs a paste for that (shifted
5374 # insert), unless private mode 35 is set.
5376 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5377 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5378 rxvt+pcfkeys|fragment for PC-style fkeys,
5379 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5380 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5381 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5382 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5383 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5384 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5385 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5386 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5387 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5388 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5389 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5390 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5391 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5392 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5393 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5394 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5395 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5396 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5397 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5398 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5400 # rxvt was originally "xvt", first announced in April 1993:
5401 # http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
5403 # Though its change-log does not mention this, John Davis has stated that he
5404 # was the author of the changes to use the bce ("new color model") which was
5405 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5406 # dates, nor give developer's names. Initial color support was added for rxvt
5407 # "2.0", which was sometime in 1994.
5409 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5410 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5412 # http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5413 # was from one of my bug-reports -TD
5415 # While the color model both for xterm and rxvt was based on Linux console,
5416 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5417 # behavior: inserting/deleting characters does not fill the newly empty cell
5418 # with the default background color.
5419 rxvt|rxvt terminal emulator (X Window System),
5421 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5422 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5423 rxvt-color|rxvt terminal emulator (X Window System),
5425 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5426 use=xterm+256color, use=rxvt,
5427 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5428 use=xterm+88color, use=rxvt,
5429 rxvt-xpm|rxvt terminal emulator (X Window System),
5431 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5432 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5433 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5434 \302x\263y\363z\362{\343|\330}\234~\376,
5436 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5437 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5438 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5439 \302x\263y\363z\362{\343|\330~\376,
5442 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5443 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5444 rxvt-16color|rxvt with 16 colors like aixterm,
5445 ncv#32, use=ibm+16color, use=rxvt,
5450 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5451 # makes its function-keys different from other flavors of rxvt -TD
5453 # Testing with tack:
5454 # + made custom description (below) to work, though it sets TERM=xterm.
5456 # Testing with vttest:
5457 # + While "based on" rxvt, some of the basic functionality is broken. The
5458 # window collapses to a single line when running several of the screens
5459 # in vttest, e.g., the tests for cursor movement, screen features,
5460 # double-sized characters.
5461 # + The vt52 test works properly, but this is an exception. Due to the
5462 # other bug(s) most of vttest is untestable.
5463 # + the color test using ECH shows a gap in the bce model, like rxvt.
5465 # Testing with xterm "vttest" scripts:
5466 # + resize.pl does not work because mrxvt does implement CSI 18 t
5467 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5468 # + none of the "dynamic colors" (OSC colors) scripts work.
5469 mrxvt|multitabbed rxvt,
5471 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5472 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5473 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5474 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5475 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5476 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5479 mrxvt-256color|multitabbed rxvt with 256 colors,
5480 use=xterm+256color, use=mrxvt,
5483 # From: Michael Jennings <mej@valinux.com>
5487 # removed kf0 which conflicts with kf10 -TD
5488 # remove cvvis which conflicts with cnorm -TD
5489 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5490 # but does otherwise follow the rxvt+pcfkeys model -TD
5491 # remove nonworking flash -TD
5492 # remove km as per tack test -TD
5493 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5494 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5495 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5496 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5497 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5498 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5499 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5500 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5501 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5502 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5503 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5504 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5505 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5506 is1=\E[?47l\E>\E[?1l,
5507 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5508 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5509 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5510 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5511 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5512 rmso=\E[27m, rmul=\E[24m,
5513 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5514 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5517 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5518 %;m%?%p9%t\016%e\017%;,
5519 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5520 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5521 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5524 Eterm-256color|Eterm with xterm 256-colors,
5525 use=xterm+256color, use=Eterm,
5527 Eterm-88color|Eterm with 88 colors,
5528 use=xterm+88color, use=Eterm,
5531 # Based on rxvt 2.4.8, it has a few differences in key bindings
5532 aterm|AfterStep terminal,
5534 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5538 # This is not based on xterm's source...
5539 # vttest shows several problems with keyboard, cursor-movements.
5540 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5541 xiterm|internationalized terminal emulator for X,
5543 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5547 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5548 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5549 # chars look like --esr)
5550 hpterm|X-hpterm|hp X11 terminal emulator,
5551 am, da, db, mir, xhp,
5552 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5553 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
5554 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5555 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5556 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
5557 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5558 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5559 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5560 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5561 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5562 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5563 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5564 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5565 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5566 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5568 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
5569 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5570 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5571 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5572 # HPUX 11 provides a color version.
5573 hpterm-color|HP X11 terminal emulator with color,
5577 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5578 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5581 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5582 # It corresponds to emu's internal emulation:
5584 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5585 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5586 # fixes: add civis, cnorm, sgr -TD
5587 emu|emu native mode,
5588 am, bce, mir, msgr, xon,
5589 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5590 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
5591 \224t\225u\226v\227w\230x\231~\244,
5592 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5593 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5594 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5595 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5596 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5597 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5598 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5599 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5600 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
5601 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5602 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5603 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5604 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5605 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5606 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5607 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5609 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
5611 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5613 # vt220 Terminfo entry for the Emu emulation, corresponds to
5615 # with NumLock set (to make the keypad transmit kf0-kf9).
5616 # fixes: add am, xenl, corrected sgr0 -TD
5617 emu-220|Emu-220 (vt200-7bit mode),
5619 cols#80, it#8, lines#24, vt#200,
5620 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5621 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5622 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
5623 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5624 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5625 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5626 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5627 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5628 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5629 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5630 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5631 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5632 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5633 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5634 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5635 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5636 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5637 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5638 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5639 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5640 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5641 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
5642 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5643 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5644 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5647 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5648 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5649 # indicate that it emulates more than one terminal, but incompletely.
5651 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5652 # It is based on vt102's entry, with some subtle differences, but also
5654 # supports ANSI colors (except for 'op' string)
5655 # apparently implements alternate screen like xterm
5656 # does not use padding, of course.
5657 mvterm|vv100|SwitchTerm aka mvTERM,
5658 am, eslok, hs, km, mir, msgr, xenl,
5659 colors#8, cols#80, it#8, lines#24, pairs#64,
5660 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5661 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
5662 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5663 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5664 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5665 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5666 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5667 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5668 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
5669 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5670 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5671 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5672 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5674 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5675 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5676 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5677 %;m%?%p9%t\016%e\017%;,
5678 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5679 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5680 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5684 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5686 # "mterm -type ansi" sets $TERM to "ansi"
5687 mterm-ansi|ANSI emulation,
5690 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5691 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5692 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5693 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5694 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5695 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5696 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5697 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5698 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5699 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5701 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5702 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5703 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5705 # mterm normally sets $TERM to "mterm"
5706 mterm|mouse-sun|Der Mouse term,
5709 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
5710 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5711 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
5712 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5713 # "mterm -type decansi" sets $TERM to "decansi"
5715 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5716 decansi|ANSI emulation with DEC compatibility hacks,
5717 am, mir, msgr, xenl,
5718 colors#8, it#8, pairs#64,
5719 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5720 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5721 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5722 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5723 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5724 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5725 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5726 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5727 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5728 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5729 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5730 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5731 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5732 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5733 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5734 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5735 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5736 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5737 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5738 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5739 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5740 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5741 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5742 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5743 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5744 u7=\E[6n, vpa=\E[%i%p1%dd,
5747 # http://vwm.sourceforge.net/
5749 # VWM 2.0.2 (2009-05-01)
5750 # vwmterm is a terminal emulator written for the VWM console window manager.
5751 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5753 am, bce, ccc, mir, msgr, npc, xenl, xon,
5755 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5756 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5757 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
5758 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5759 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5760 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5761 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
5762 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5763 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5764 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5765 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5766 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5767 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5768 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5769 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
5770 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5771 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5772 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5776 # MGR is a Bell Labs window system lighter-weight than X.
5777 # These entries describe MGR's xterm-equivalent.
5778 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5781 mgr|Bellcore MGR (non X) window system terminal emulation,
5783 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
5784 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5785 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5786 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5787 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5788 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5789 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5790 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
5791 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5793 mgr-sun|Mgr window with Sun keyboard,
5794 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5795 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5796 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5797 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5798 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5799 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5800 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5801 mgr-linux|Mgr window with Linux keyboard,
5802 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5803 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5804 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5805 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5806 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5812 # This version uses a table which supports a single modifier (a subset of
5813 # xterm's keys, using the same scheme). Because it supports only a single
5814 # modifier in this table, function keys f36-f48 are normally unavailable
5815 # because they are assigned to modifier-4.
5817 # The program assigns TERM to match the program name (the upstream source says
5818 # "st", but Debian renames it to "stterm").
5820 # The source includes two entries which are not useful here:
5821 # st-meta| simpleterm with meta key,
5822 # st-meta-256color| simpleterm with meta key and 256 colors,
5823 # because st's notion of "meta" does not correspond to the terminfo definition.
5824 # Rather, it acts like xterm - when the meta feature is disabled.
5827 # Added eo, removed ul -TD
5830 # implements control-modifier, but not control-shift for special keys
5831 # implements alt-modifier, but not alt-shift for special keys
5834 # http://git.suckless.org/st/log/st.info
5835 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
5836 # still has no function keys past kf36 (no combinations of modifiers)
5837 # no application keypad mode, e.g, kent.
5838 st|stterm| simpleterm 0.4.1,
5839 am, bce, hs, mir, msgr, npc, xenl, Tc, XT,
5840 colors#8, cols#80, it#8, lines#24, pairs#64,
5841 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
5843 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5844 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
5845 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5846 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5847 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5848 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5849 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5850 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
5851 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5852 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
5853 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
5854 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
5855 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
5856 ka3=\E[5~, kb2=\EOu, kbs=\177, kc1=\E[4~, kc3=\E[6~,
5857 kcbt=\E[Z, kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB,
5858 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~,
5859 ked=\E[1;5F, kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP,
5860 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P,
5861 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
5862 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
5863 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
5864 kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R,
5865 kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~,
5866 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
5867 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~,
5868 kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, kf4=\EOS,
5869 kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
5870 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5871 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
5872 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
5873 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5874 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5875 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5876 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5877 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5878 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5879 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
5880 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5881 ritm=\E[23m, rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l,
5882 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5883 rs2=\E[4l\E>\E[?1034l, sc=\E7, setab=\E[4%p1%dm,
5885 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5887 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5889 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5890 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5891 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5892 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5893 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5894 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
5899 # Note: the original terminfo description uses leading blank to persuade
5900 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5903 # Reading the code shows it should work for aixterm 16-colors
5904 # - added st-16color
5907 # - set eo (erase-overstrike)
5909 # - tbc doesn't work
5911 # - cbt doesn't work
5912 # - shifted cursor-keys send sequences like rxvt
5913 # - sgr referred to unimplemented "invis" mode.
5914 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5915 simpleterm|old-st| simpleterm 0.1.1,
5916 am, eo, mir, msgr, ul, xenl,
5917 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5918 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5919 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5920 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5921 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5922 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5923 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5924 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5925 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
5926 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5927 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5928 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5929 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5930 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5931 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5932 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5933 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5935 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5936 st-16color|stterm-16color|simpleterm with 16-colors,
5937 use=ibm+16color, use=st,
5938 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5939 # shown in the titlebar.
5941 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5942 # characters, making the choice nonportable.
5943 st-256color|stterm-256color|simpleterm with 256 colors,
5945 initc@, oc@, use=xterm+256color, use=st,
5948 # https://code.google.com/p/jessies/
5949 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5950 # Debian/current -TD (2011/8/20)
5952 # There are some packaging problems:
5953 # a) using Java, the program starts off using 50Mb, and climbs from there,
5954 # up to 114Mb after testing (no scrollback).
5955 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5956 # (two copies, just in case the host happens to be Mac OS X).
5957 # I deleted this after testing with tack.
5959 # Issues/features found with tack:
5960 # a) tbc does not work (implying that hts also is broken).
5961 # Comparing with the tabs utility shows a problem with the last tabstop on
5963 # b) has xterm-style shifted function-key strings
5964 # meta also is used, but control is ignored.
5965 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
5967 # d) some combinations of shift/control send xterm-style sequences for
5968 # insert/delete/home/end.
5969 # e) numeric keypad sends only numbers (compare with vttest).
5970 # f) meta mode (km) is not implemented.
5972 # Issues found with ncurses test-program:
5973 # a) bce is inconsistently implemented
5974 # b) widths of Unicode values above 256 do not always agree with wcwidth.
5976 # Checked with vttest, found low degree of compatibility there.
5978 # Checked with xterm's scripts, found that the 256-color palette is fixed.
5982 # b) corrected sgr0 to reset alternate character set
5983 # c) modified smacs/rmacs to use SCS rather than SI/SO
5986 terminator|Terminator no line wrap,
5987 eo, mir, msgr, xenl, xon,
5988 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
5989 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5990 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5991 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5992 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
5993 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5994 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5995 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5996 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
5997 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
5998 is1=\E[?47l\E=\E[?1l,
5999 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6000 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6001 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6002 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6003 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6004 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6005 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6006 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6007 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6008 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6009 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6010 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6011 setaf=\E[38;5;%p1%dm,
6012 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6014 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6015 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6019 # http://enlightenment.org
6021 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6022 # emulator, nor is it compatible with xterm, but it uses a few features from
6026 # cursor does not fill on focus
6027 # there are pervasive problems with clearing/erasing parts of the screen
6028 # resizing the window causes it to stop listening to the keyboard
6030 # doesn't understand vt100 CPR needed for resize
6035 # uses bce model for colors, but (see below) fails the vttest screens
6036 # has partial support for 256color feature.
6037 # tack function-keys (a subset of xterm+pcf0), and
6038 # tack cursor-keys (a subset of xterm+pce2):
6039 # ctrl+shift (ignored)
6041 # shift-alt modifier -> shift (2)
6045 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6046 # ctrl + khome/kend works - none of the other modifiers do
6048 # spits lots of messages from termptyesc.c especially in vttest.
6049 # no 132-column mode
6050 # fails menu 1, 2 (definitely not vt100-compatible)
6051 # primary (claims vt420 with several options, apparently none work) and
6052 # secondary report says (perhaps... vt420): \E[>41;285;0c
6053 # CHA, HPR, VPA, CNL, CPL work
6054 # BCE with ED/EL - fail
6055 # BCE with ECH/indexing - fail
6057 # unlike teken, background light/dark works
6059 # X10 and Normal mouse work
6060 # Any-event mouse works
6061 # Mouse button-event works
6063 # This description uses xterm+pcf0, which is misleading because the program
6064 # does not handle combinations of modifiers - but listing them all would
6065 # involve more effort than its developers spent -TD
6066 terminology|EFL-based terminal emulator,
6068 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6069 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6070 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6071 kind=\E[1;2B, kri=\E[1;2A,
6072 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6073 %;m%?%p9%t\016%e\017%;$<2>,
6074 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6075 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6076 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6077 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6078 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6079 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6080 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6081 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6084 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6087 # Columbus UNIX virtual terminal. This terminal also appears in
6088 # UNIX 4.0 and successors as line discipline 1 (?), but is
6089 # undocumented and does not really work quite right.
6090 cbunix|cb unix virtual terminal,
6092 cols#80, lines#24, lm#0,
6093 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6094 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6095 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
6096 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6097 smso=\Ea^D, smul=\Ea^A,
6098 # (vremote: removed obsolete ":nl@:" -- esr)
6099 vremote|virtual remote terminal,
6101 cols#79, use=cbunix,
6103 pty|4bsd pseudo teletype,
6104 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6105 smso=\Ea$, smul=\Ea!, use=cbunix,
6109 # https://www.emacswiki.org/emacs/AnsiTerm
6110 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6112 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6113 eterm|gnu emacs term.el terminal emulation,
6116 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
6117 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6118 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6119 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6120 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6121 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6122 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
6123 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6124 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6127 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6128 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6129 am, mir, msgr, xenl,
6130 colors#8, cols#80, lines#24, pairs#64,
6131 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
6132 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6133 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6134 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6135 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6136 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6137 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
6138 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6139 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6140 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6141 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6142 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6143 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6145 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6146 u6=\E[%i%d;%dR, u7=\E[6n,
6148 # shell.el can "do" color, though not nearly as well.
6151 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6154 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6155 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6156 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6158 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6159 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6160 # italics but does not lose the color information -TD 2017/01/28.
6161 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6163 colors#8, it#8, ncv#13, pairs#64,
6164 bold=\E[1m, cud1=^J, ht=^I, ind=^J, op=\E[39;49m,
6165 ritm=\E[23m, rmul=\E[24m, setab=\E[4%p1%dm,
6166 setaf=\E[3%p1%dm, sgr0=\E[m, sitm=\E[3m, smul=\E[4m,
6170 # Entries for use by the `screen' program by Juergen Weigert,
6171 # Michael Schroeder, Oliver Laumann. The screen and
6172 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6173 # come from University of Wisconsin and may be older.
6174 # (screen: added <cnorm> on ANSI model -- esr)
6176 # 'screen' defines extensions to termcap. Some are used in its terminal
6178 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6179 # AX (bool) Does understand ANSI set default fg/bg color
6180 # (\E[39m / \E[49m).
6181 # S0 (str) Switch charset 'G0' to the specified charset.
6182 # E0 (str) Switch charset 'G0' back to standard charset.
6184 # Initially tested with screen 3.09.08
6186 # According to its manual page
6188 # Screen is a full-screen window manager that multiplexes a physical
6189 # terminal between several processes (typically interactive shells). Each
6190 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6191 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6192 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6193 # multiple character sets).
6195 # However, there is a design error in its support for video highlights. The
6196 # program uses a table (rendlist) which equates the SGR codes to terminal
6197 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6198 # is modified only by the presence or absence of the corresponding capabilities.
6199 # Not by their values.
6201 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6202 # correspond to the rendlist table.
6204 # The table gives this information:
6216 # 22 reset bold, standout and dim
6218 # 24 reset underline
6223 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6224 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6225 # Without some redesign of screen, it is not possible to extend the set of
6226 # capabilities. Substitution would be possible, e.g., sending italics in
6227 # place of underline.
6229 # Because screen uses hard-coded parsing, it does not check if two capabilities
6230 # use the same value. For example, changing standout to be the same as any of
6231 # the other capabilities will confuse screen. Curses applications which use
6232 # sgr are not impacted (because that usually resets all capabilities before
6233 # setting any), but termcap applications do not use sgr -TD
6234 screen|VT 100/ANSI X3.64 virtual terminal,
6235 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6236 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6237 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6239 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6240 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
6241 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6242 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6243 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6244 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6245 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6246 enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
6247 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0,
6248 kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6249 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6250 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6251 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6252 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6253 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6254 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6255 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6256 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6257 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6258 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6259 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
6260 S0=\E(%p1%c, use=ecma+color,
6261 # The bce and status-line entries are from screen 3.9.13 (and require some
6262 # changes to .screenrc).
6263 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6266 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6267 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6269 # ======================================================================
6270 # Entries for GNU Screen with 16 colors.
6271 # Those variations permit to benefit from 16 colors palette, and from
6272 # bold font and blink attribute separated from bright colors. But they
6273 # are less portable than the generic "screen" 8 color entries: Their
6274 # usage makes real sense only if the terminals you attach and reattach
6275 # do all support 16 color palette.
6277 screen-16color|GNU Screen with 16 colors,
6278 use=ibm+16color, use=screen,
6280 screen-16color-s|GNU Screen with 16 colors and status line,
6281 use=ibm+16color, use=screen-s,
6283 screen-16color-bce|GNU Screen with 16 colors and BCE,
6284 use=ibm+16color, use=screen-bce,
6286 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6287 bce, use=ibm+16color, use=screen-s,
6289 # ======================================================================
6290 # Entries for GNU Screen 4.02 with --enable-colors256.
6292 screen-256color|GNU Screen with 256 colors,
6293 use=xterm+256setaf, use=screen,
6295 screen-256color-s|GNU Screen with 256 colors and status line,
6296 use=xterm+256setaf, use=screen-s,
6298 screen-256color-bce|GNU Screen with 256 colors and BCE,
6299 bce, use=xterm+256setaf, use=screen-bce,
6301 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6302 bce, use=xterm+256setaf, use=screen-s,
6304 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6305 use=xterm+256setaf, use=screen.xterm-new,
6307 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6308 use=xterm+256setaf, use=screen.konsole,
6310 screen.vte-256color|GNU Screen with vte using 256 colors,
6311 use=xterm+256setaf, use=screen.vte,
6313 screen.putty-256color|GNU Screen with putty using 256 colors,
6314 use=xterm+256setaf, use=screen.putty,
6316 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6317 use=xterm+256setaf, use=screen.mlterm,
6319 # ======================================================================
6321 # Read the fine manpage:
6322 # When screen tries to figure out a terminal name for
6323 # itself, it first looks for an entry named "screen.<term>",
6324 # where <term> is the contents of your $TERM variable. If
6325 # no such entry exists, screen tries "screen" (or "screen-w"
6326 # if the terminal is wide (132 cols or more)). If even this
6327 # entry cannot be found, "vt100" is used as a substitute.
6329 # Notwithstanding the manpage, screen uses its own notion of the termcap
6330 # and some keys from "screen.<term>" are ignored. Here is an entry which
6331 # covers those (tested with screen 4.00.02) -TD
6332 screen+fkeys|function-keys according to screen,
6333 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6336 # See explanation before "screen" entry. Cancel italics so that applications
6337 # do not assume screen supports the feature. Add this tweak to entries which
6338 # extend screen for terminals which do support italics.
6339 screen+italics|screen cannot support italics,
6342 # Here are a few customized entries which are useful -TD
6345 # (a) screen does not support invis.
6346 # (b) screen's implementation of bw is incorrect according to tack.
6347 # (c) screen appears to hardcode the strings for khome/kend, making it
6348 # necessary to override the "use=" clause's values (screen+fkeys).
6349 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6350 # which is NOT the same as the terminfo screen.<term>.
6351 # (e) when screen finds one of these customized entries, it sets $TERM to
6352 # match. Hence, no "screen.xterm" entry is provided, since that would
6353 # create heartburn for people running remote xterm's.
6355 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6356 # since the default translations override the built-in keycode
6357 # translation. They are suppressed here to show what is tested by tack.
6358 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6360 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
6361 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6362 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6363 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
6364 #:screen.xterm|screen for modern xterm,
6365 #: use=screen.xterm-new,
6366 # xterm-r6 does not really support khome/kend unless it is propped up by
6367 # the translations resource.
6368 screen.xterm-r6|screen customized for X11R6 xterm,
6369 bw, use=screen+fkeys, use=xterm-r6,
6370 # Color applications running in screen and TeraTerm do not play well together
6371 # on Solaris because Sun's curses implementation gets confused.
6372 screen.teraterm|disable ncv in teraterm,
6374 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
6375 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
6376 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6377 use=screen+fkeys, use=screen,
6379 screen.rxvt|screen in rxvt,
6381 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6382 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6383 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
6384 screen.Eterm|screen in Eterm,
6385 use=screen+fkeys, use=Eterm,
6386 screen.mrxvt|screen in mrxvt,
6387 use=screen+fkeys, use=mrxvt,
6388 screen.vte|screen in any VTE-based terminal,
6389 use=screen+italics, use=screen+fkeys, use=vte,
6390 screen.gnome|screen in GNOME Terminal,
6391 use=screen+italics, use=screen+fkeys, use=gnome,
6392 screen.konsole|screen in KDE console window,
6393 use=screen+italics, use=screen+fkeys, use=konsole,
6394 # fix the backspace key
6395 screen.linux|screen in linux console,
6397 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
6398 screen.mlterm|screen in mlterm,
6399 use=screen+fkeys, use=mlterm,
6400 screen.putty|screen in putty,
6401 use=screen+fkeys, use=putty,
6403 # The default "screen" entry is reasonably portable, but not optimal for the
6404 # most widely-used terminal emulators. The "bce" capability is supported in
6405 # screen since 3.9.13, and when used, will require fewer characters to be sent
6406 # to the terminal for updates.
6408 # If you are using only terminals which support bce, then you can use this
6409 # feature in your screen configuration.
6411 # Adding these lines to your ".screenrc" file will allow using these customized
6416 screen-bce.xterm-new|screen optimized for modern xterm,
6418 ech@, use=screen+italics, use=screen.xterm-new,
6419 screen-bce.rxvt|screen optimized for rxvt,
6421 ech@, use=screen.rxvt,
6422 screen-bce.Eterm|screen optimized for Eterm,
6424 ech@, use=screen.Eterm,
6425 screen-bce.mrxvt|screen optimized for mrxvt,
6427 ech@, use=screen.mrxvt,
6428 screen-bce.gnome|screen optimized for GNOME-Terminal,
6430 ech@, use=screen+italics, use=screen.gnome,
6431 screen-bce.konsole|screen optimized for KDE console window,
6433 ech@, use=screen+italics, use=screen.konsole,
6434 screen-bce.linux|screen optimized for linux console,
6436 ech@, use=screen.linux,
6438 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6439 cols#132, use=screen,
6441 screen2|old VT 100/ANSI X3.64 virtual terminal,
6442 cols#80, it#8, lines#24,
6443 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
6444 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6445 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6446 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6447 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6448 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6449 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6450 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6451 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6452 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6453 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6454 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6455 screen3|older VT 100/ANSI X3.64 virtual terminal,
6457 cols#80, it#8, lines#24,
6458 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6459 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6460 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6461 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6462 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6463 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6464 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
6465 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6466 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6467 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6468 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6469 smul=\E[4m, tbc=\E[3g,
6473 # tmux is compatible with screen, but has support for italics, and some of the
6474 # xterm cursor bits.
6475 tmux|tmux terminal multiplexer,
6476 ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
6477 use=xterm+edit, use=xterm+pcfkeys, use=xterm+sl,
6478 use=xterm+tmux, use=screen,
6480 tmux-256color|tmux with 256 colors,
6481 use=xterm+256setaf, use=tmux,
6486 # http://www.brain-dump.org/projects/dvtm/
6488 # + This uses ncurses to manage the display, including support for italics and
6490 # + However, default-colors are incomplete: do not set bce.
6491 # + It does not implement flash (since no \e[?5h)
6492 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
6493 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
6494 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
6495 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
6497 # + It also omits the shifted cursor- and editing-keypad keys.
6498 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
6499 # (and passes those through without interpretation)
6500 # and may simply pass-through rxvt's, making it appear to work.
6501 # In other cases such as kf23 and up, no pass-through is done.
6502 # + Most of the mode-settings in the initialization/reset strings are not
6503 # implemented; dvtm copies its description from rxvt.
6504 dvtm|dynamic virtual terminal manager,
6505 am, eo, mir, msgr, xenl, AX,
6506 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
6507 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6508 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6509 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
6510 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6511 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6512 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6513 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6514 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
6515 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6516 is1=\E[?47l\E=\E[?1l,
6517 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
6518 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6519 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
6520 kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs, kcbt=\E[Z,
6521 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6522 kdch1=\E[3~, kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~,
6523 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6524 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6525 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
6526 kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, kf3=\E[13~,
6527 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
6528 kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~,
6529 kind=\E[a, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b,
6530 kslt=\E[4~, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6531 ritm=\E[23m, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
6532 rmso=\E[27m, rmul=\E[24m,
6533 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6534 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6536 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
6538 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6540 sgr0=\E[m\017, sitm=\E[3m, smacs=^N, smcup=\E7\E[?47h,
6541 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6544 dvtm-256color|dynamic virtual terminal manager with 256 colors,
6545 colors#256, pairs#32767,
6546 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
6548 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
6554 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
6555 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
6556 # been maintained until recently by the National Center for Supercomputer
6557 # Applications, and it is feature rich, stable and free. It can be downloaded
6558 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
6559 # xterm+sl, and the docs at NCSA. It works well.
6561 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
6562 # The terminal options should be set as follows:
6563 # Xterm sequences ON
6564 # use VT wrap mode ON
6565 # use Emacs arrow keys OFF
6566 # CTRL-COMND is Emacs meta ON
6568 # answerback string: "ncsa-vt220-8"
6569 # setup keys: all disabled
6571 # Application mode is not used.
6573 # Other special mappings:
6580 # PAGEDOWN Next Screen
6582 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
6585 # The status-line manipulation is a mapping of the xterm-compatible control
6586 # sequences for setting the window-title. So you must use tsl and fsl in
6587 # pairs, since the latter ends the string that is loaded to the window-title.
6588 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6589 am, km, mir, msgr, xenl,
6590 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6591 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6592 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
6593 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6594 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6595 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6596 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6597 el=\E[K, el1=\E[1K, enacs=\E)0,
6598 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
6599 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
6600 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
6601 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
6602 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6603 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6604 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6605 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6606 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6607 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6608 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6609 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6610 rmso=\E[27m, rmul=\E[24m,
6611 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6612 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
6614 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6615 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6616 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6617 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6618 use=ncsa-m, use=klone+color,
6619 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6621 dsl@, fsl@, tsl@, use=ncsa,
6622 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6624 dsl@, fsl@, tsl@, use=ncsa-m,
6626 # The documented function-key mapping refers to the Apple Extended Keyboard
6627 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6628 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6629 # some keyboards and many applications require these as F1-F4.
6631 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6632 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6633 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6634 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6635 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6636 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6638 #### Pilot Pro Palm-Top
6640 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6641 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
6642 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6645 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
6646 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6647 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
6650 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6651 # These entries are for the Embeddable Linux Kernel System (ELKS)
6652 # project - an heavily stripped down Linux to be run on 16 bit
6653 # boxes or, eventually, to be used in embedded systems - and have been
6654 # adapted from the stock ELKS termcap. The project itself looks stalled,
6655 # and the latest improvements I know of date back to March 2000.
6657 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6658 # as an added bonus, this deals with all the capabilities common to
6659 # both VT52 and ANSI (or, eventually, "special") modes.
6661 elks-glasstty|ELKS glass-TTY capabilities,
6663 cols#80, it#8, lines#25,
6664 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
6667 elks-vt52|ELKS vt52 console,
6668 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6669 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6670 home=\EH, use=elks-glasstty,
6672 elks-ansi|ELKS ANSI console,
6673 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6674 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6675 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6677 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6678 # instead of VT52, but the "elks" entry still refers to the latter.
6680 elks|default ELKS console,
6683 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6684 # one but in screen size
6686 sibo|ELKS SIBO console,
6687 cols#61, it#8, lines#20, use=elks-vt52,
6689 ######## COMMERCIAL WORKSTATION CONSOLES
6695 # This is from the OSF/1 Release 1.0 termcap file
6696 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6699 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6700 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6701 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6702 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6703 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6708 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6709 oldsun|Sun Microsystems Workstation console,
6710 OTbs, am, km, mir, msgr,
6711 cols#80, it#8, lines#34,
6712 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
6713 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6714 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6715 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6716 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6717 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6718 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6719 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6720 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6721 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6722 sun-il|Sun Microsystems console with working insert-line,
6725 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6726 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6727 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6728 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6729 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6730 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
6731 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6732 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6733 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6734 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6735 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6736 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6737 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6738 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6739 # flake out on the last line. Unfortunately, without them the terminal has no
6741 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6742 il@, il1@, use=sun-il,
6743 # If you are using an SS5, change the sun definition to use sun-ss5.
6744 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6747 sun+sl|Sun Workstation window status line,
6749 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6751 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6752 sun-s|Sun Microsystems Workstation window with status line,
6754 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6755 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6757 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6758 sun-48|Sun 48-line window,
6759 cols#80, lines#48, use=sun,
6760 sun-34|Sun 34-line window,
6761 cols#80, lines#34, use=sun,
6762 sun-24|Sun 24-line window,
6763 cols#80, lines#24, use=sun,
6764 sun-17|Sun 17-line window,
6765 cols#80, lines#17, use=sun,
6766 sun-12|Sun 12-line window,
6767 cols#80, lines#12, use=sun,
6768 sun-1|Sun 1-line window for sysline,
6771 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
6772 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6773 ich1@, rmir@, smir@, use=sun,
6774 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6776 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6777 sun-type4|Sun Workstation console with type 4 keyboard,
6778 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6779 kcuu1=\E[215z, use=sun-il,
6781 # Most of the current references to sun-color are from users wondering why this
6782 # is the default on install. Details from reading the wscons manpage, adding
6783 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6784 # when those were added -TD (2005-05-28)
6786 # According to wscons manpage, color is supported only on IA systems.
6787 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6788 # does not list these. It also sets ncv#3, however that corresponds to
6789 # underline and standout.
6791 # Since the documentation and terminfo do not agree, see also current code at
6792 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6794 # That (actually a different driver which "supports" sun-color) also supports
6801 # It supports bold, but not underline -TD (2009-09-19)
6802 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6803 colors#8, ncv#3, pairs#64,
6804 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6805 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6806 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6807 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6809 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6811 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6812 smso=\E[7m, use=sun,
6817 # (wsiris: this had extension capabilities
6818 # :HS=\E7F2:HE=\E7F7:\
6819 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6820 # See the note on Iris extensions near the end of this file.
6821 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6822 # <flash> from BRL -- esr)
6823 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6824 OTbs, OTnc, OTpt, am,
6825 OTkn#3, cols#80, it#8, lines#40,
6826 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6827 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6828 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6829 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6830 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6831 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6832 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6833 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6838 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6839 # environment). Note: these have nothing to do with Sony's News workstation
6843 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6844 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6845 psterm|psterm-basic|NeWS psterm-80x34,
6846 OTbs, am, hs, km, ul,
6847 cols#80, it#8, lines#34,
6848 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6849 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6850 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6851 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6852 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6853 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6854 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6856 psterm-96x48|NeWS psterm 96x48,
6857 cols#96, lines#48, use=psterm,
6858 psterm-90x28|NeWS psterm 90x28,
6859 cols#90, lines#28, use=psterm,
6860 psterm-80x24|NeWS psterm 80x24,
6861 cols#80, lines#24, use=psterm,
6862 # This is a faster termcap for psterm. Warning: if you use this termcap,
6863 # some control characters you type will do strange things to the screen.
6864 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6865 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6866 OTbs, am, hs, km, ul,
6867 cols#80, it#8, lines#34,
6868 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6869 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6870 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6871 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6872 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6873 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6874 smso=^Oo, smul=^Ou, tsl=^Ol,
6878 # Use `glasstty' for the Workspace application
6881 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6884 cols#80, it#8, lines#24,
6885 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6886 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6887 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6888 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6889 nextshell|NeXT Shell application,
6892 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
6895 #### Sony NEWS workstations
6898 # (news-unk: this had :KB=news: -- esr)
6899 news-unk|SONY NEWS vt100 emulator common entry,
6900 OTbs, OTpt, am, xenl,
6902 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6903 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6904 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6905 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6906 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6907 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6908 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6909 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6910 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6911 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6912 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6913 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6915 # (news-29: this had :TY=ascii: --esr)
6917 lines#29, use=news-unk,
6918 # (news-29-euc: this had :TY=euc: --esr)
6921 # (news-29-sjis: this had :TY=sjis: --esr)
6925 # (news-33: this had :TY=ascii: --esr)
6927 lines#33, use=news-unk,
6928 # (news-33-euc: this had :TY=euc: --esr)
6931 # (news-33-sjis: this had :TY=sjis: --esr)
6935 # (news-42: this had :TY=ascii: --esr)
6937 lines#42, use=news-unk,
6938 # (news-42-euc: this had :TY=euc: --esr)
6941 # (news-42-sjis: this had :TY=sjis: --esr)
6945 # NEWS-OS old termcap entry
6947 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6948 news-old-unk|SONY NEWS vt100 emulator common entry,
6949 OTbs, OTpt, am, xenl,
6951 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6952 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6953 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6954 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6955 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6956 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6957 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6958 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6959 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6961 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6962 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6965 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
6969 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
6970 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
6972 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
6975 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
6976 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
6979 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
6983 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
6984 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
6987 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
6991 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
6992 # also the alias vt100-bm.
6993 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
6996 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7000 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7001 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7004 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7008 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7009 news28|sony vt100 emulator 28 lines,
7012 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7016 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7017 news29|news28-a|sony vt100 emulator 29 lines,
7019 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7023 # (news511: this had :TY=sjis: --esr)
7024 nwp511|nwp-511|nwp-511 vt100,
7025 OTbs, OTpt, am, xenl,
7027 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7028 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7029 ed=\E[J$<30/>, el=\E[K$<3/>,
7030 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7031 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7032 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7033 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7034 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7035 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7036 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7037 # (news517: this had :TY=sjis:. --esr)
7038 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7041 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7042 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7043 tsl=\E[1$}\E[;%df, use=vt200,
7044 # (news517-w: this had :TY=sjis:. --esr)
7045 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7048 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7049 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7050 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7051 tsl=\E[1$}\E[;%df, use=vt200,
7053 #### Common Desktop Environment
7056 # This ships with Sun's CDE in Solaris 2.5
7057 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7058 dtterm|CDE desktop terminal,
7059 am, mir, msgr, xenl, xon,
7060 cols#80, it#8, lines#24, lm#0, ncv@,
7061 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7062 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7063 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
7064 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7065 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7066 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7067 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7068 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7069 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7070 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7071 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7072 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7073 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7074 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7075 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7076 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7077 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7078 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7079 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7080 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7082 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7083 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7084 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7085 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7087 ######## Non-Unix Consoles
7090 #### EMX termcap.dat compatibility modes
7092 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7093 # no_color_video to inform the application that standout(1), underline(2)
7094 # reverse(4) and invisible(64) don't work with color.
7095 emx-base|DOS special keys,
7098 bel=^G, use=ansi.sys,
7100 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7101 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7102 # names longer than 14 characters, the nominal maximum).
7104 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7105 ansi-emx|ANSI.SYS color,
7106 am, bce, eo, mir, msgr, xon,
7107 colors#8, cols#80, it#8, lines#25, pairs#64,
7108 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7109 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
7110 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7111 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7112 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7113 ich=\E[%p1%d@, ich1=\E[@, ind=^J, kb2=\E[G, kbs=^H, kf0=\0D,
7114 kll=\0O, kspd=^Z, nel=^M^J, rev=\E[5;37;41m, rmir=\E[4l,
7115 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7116 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7117 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7118 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7119 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7120 # nice colors for Emacs (white on blue, mode line white on cyan)
7121 ansi-color-2-emx|ANSI.SYS color 2,
7122 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7123 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7124 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7125 smul=\E[1;36;44m, use=ansi-emx,
7126 # nice colors for Emacs (white on black, mode line black on cyan)
7127 ansi-color-3-emx|ANSI.SYS color 3,
7128 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7129 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7130 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7131 smul=\E[0;36;40m, use=ansi-emx,
7132 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7134 cols#80, it#8, lines#24,
7135 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7136 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7137 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7138 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7139 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7140 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
7145 # Use this for cygwin32 (tested with beta 19.1)
7146 # underline is colored bright magenta
7147 # shifted kf1-kf12 are kf11-kf22
7148 cygwinB19|ansi emulation for cygwin32,
7149 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7150 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7151 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7152 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7153 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7154 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7155 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7158 # Use this for cygwin (tested with version 1.1.0).
7159 # I've combined pcansi and linux. Some values of course were different and
7160 # I've indicated which of these were and which I used.
7161 # Cheers, earnie_boyd@yahoo.com
7162 # several changes based on running with tack and comparing with older entry -TD
7163 # more changes from csw:
7165 # remove eo [erase overstrike with blank]
7166 # change clear was \E[H\E[J now \E[2J (faster?)
7169 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7171 # add cub [cursor back param]
7172 # add cuf [cursor forward param]
7173 # add cuu [cursor up param]
7174 # add cud [cursor down param]
7175 # add hs [has status line]
7176 # add fsl [return from status line]
7177 # add tsl [go to status line]
7178 # add smacs [Start alt charset] (not sure if this works)
7179 # add rmacs [End alt charset] (ditto)
7180 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7181 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7182 # add kb2 [center of keypad]
7183 # add u8 [user string 8] \E[?6c
7184 # add el [clear to end of line] \E[K
7186 # cnorm [make cursor normal] not implemented
7187 # flash [flash] not implemented
7188 # blink [blink] not implemented very usefully in cygwin? \E[5m
7189 # dim [dim] not implemented very usefully in cygwin? \E[2m
7190 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7191 # kNXT [shifted next key] not implemented
7192 # kPRV [shifted prev key] not implemented
7193 # khome [home key] really is \E[1~ NOT \E[H
7194 # tbc [clear tab stops] not implemented
7195 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
7196 # smpch [Start PC charset] is \E[11m, same as smacs
7197 # rmpch [End PC charset] is \E[10m, same as rmacs
7198 # mir [move in insert mode] fails in tack?
7199 # bce [back color erase] causes problems with change background color?
7200 # cvvis [make cursor very visible] causes a stackdump when testing with
7201 # testcurs using the output option? \E[?25h\E[?8c
7202 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7203 # ech [erase characters param] broken \E[%p1%dX
7204 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7207 # Remove cbt since it does not work in current cygwin
7208 # Add 'mir' and 'in' flags based on tack
7209 cygwin|ansi emulation for Cygwin,
7210 am, hs, mir, msgr, xon,
7211 colors#8, it#8, pairs#64,
7212 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7213 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7214 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7215 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
7216 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7217 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7218 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7219 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7220 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7221 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
7222 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7223 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7224 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7225 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7226 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7227 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7228 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7229 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7230 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7231 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7232 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7233 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7234 %t;8%;%?%p9%t;11%;m,
7235 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7236 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7237 vpa=\E[%i%p1%dd, use=vt102+enq,
7239 # I've supplied this so that you can help test new values and add other
7240 # features. Cheers, earnie_boyd@yahoo.com.
7242 # Some features are from pcansi. The op value is from linux. Function-keys
7243 # are from linux. These have been tested not to cause problems. xenl was in
7244 # this list, but DOES cause problems so it has been removed
7245 cygwinDBG|Debug Version for Cygwin,
7246 am, eo, mir, msgr, xon,
7247 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7248 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7249 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7250 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7251 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7252 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
7253 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7254 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7255 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7256 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7257 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
7258 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7259 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7260 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7261 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7262 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7263 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7264 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7265 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7266 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7267 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
7268 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7269 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7270 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7271 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7272 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7273 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7274 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7279 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7280 # encodings used by other x86 environments. All others are invented for DJGPP.
7281 # Oddly enough, while several combinations of modifiers are tabulated, there is
7282 # none for shifted cursor keys.
7334 # Ctrl-Delete \E[43~
7335 # Ctrl-Down Arrow \E[38~
7338 # Ctrl-Insert \E[42~
7339 # Ctrl-Left Arrow \E[39~
7340 # Ctrl-Page Down \E[46~
7341 # Ctrl-Page Up \E[45~
7342 # Ctrl-Right Arrow \E[40~
7343 # Ctrl-Up Arrow \E[37~
7359 # Alt-Down Arrow \E[60~
7363 # Alt-Left Arrow \E[61~
7364 # Alt-Page Down \E[68~
7365 # Alt-Page Up \E[67~
7366 # Alt-Right Arrow \E[62~
7367 # Alt-Up Arrow \E[59~
7396 djgpp|ansi emulation for DJGPP alpha,
7397 am, bce, msgr, xhp, xon, xt,
7398 colors#8, it#8, pairs#64,
7399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7400 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7401 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7402 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7403 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
7404 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7405 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7406 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7407 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7408 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7409 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7410 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7411 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7412 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7413 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7414 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7415 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
7416 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7417 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7418 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
7419 %p6%t;1%;%?%p7%t;8%;m,
7420 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7422 djgpp203|Entry for DJGPP 2.03,
7424 cols#80, it#8, lines#25,
7425 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
7428 djgpp204|Entry for DJGPP 2.04,
7430 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7431 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7432 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
7433 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7434 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7435 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7436 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7437 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7438 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7439 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7440 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7441 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7442 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7443 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
7444 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7445 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7449 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7450 # buggy. Another odd bug appears when displaying "~" in alternate character
7451 # set (the emulator spits out error messages). Compare with att6386 -TD
7452 uwin|U/Win 3.2 console,
7453 am, eo, in, msgr, xenl, xon,
7454 colors#8, it#8, ncv#58, pairs#64,
7455 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7456 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7457 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7458 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7459 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
7460 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7461 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7462 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
7463 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7464 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
7465 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
7466 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
7467 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
7468 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
7469 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7470 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
7471 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
7472 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
7474 #### Microsoft (miscellaneous)
7476 # This entry fits the Windows NT console when the _POSIX_TERM environment
7477 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
7478 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
7479 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
7480 # systems is not, and (surprise!) they match very well.
7482 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
7483 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
7484 # are the installation instructions a pile of mind-numbing bureaucratese,
7485 # but the termcap entry is actually broken and unusable as given; the :do:
7486 # capability is misspelled "d".
7488 # To use this, you need to a bunch of environment variables:
7490 # SET _POSIX_TERM=on
7492 # SET TERMCAP=location of termcap file in POSIX file format
7493 # which is case-sensitive.
7494 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
7497 # Important note: setting the TMP environment variable in POSIX style renders
7498 # it incompatible with a lot of other applications, including Visual C++. So
7499 # you should have a separate command window just for vi. All the other
7500 # variables may be permanently set in the Control Panel\System applet.
7502 # You can find out more about the restrictions of this facility at
7503 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
7505 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
7506 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
7508 cols#80, it#8, lines#25,
7509 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7510 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7511 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
7512 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
7513 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
7514 # From: jew@venus.sunquest.com
7515 # Date: 19 Feb 93 23:41:07 GMT
7516 # Here's a combination of ansi and vt100 termcap
7517 # entries that works nearly perfectly for me
7518 # (Gateway 2000 Handbook and Microsoft Works 3.0):
7519 pcmw|PC running Microsoft Works,
7521 cols#80, it#8, lines#24, vt#3,
7522 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
7523 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
7524 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
7525 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
7526 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
7527 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7528 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
7529 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
7530 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7531 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7532 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7535 # From: Federico Bianchi
7536 # This is the entry for the OpenNT terminal.
7537 # The ntconsole name is for backward compatability.
7538 # This is for OpenNT 2.0 and later.
7539 # Later OpenNT was renamed to Interix.
7541 # Presently it is distributed by Microsoft as Services For Unix (SFU).
7542 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
7543 # the documentation dates from 1.9.9e) -TD
7545 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
7547 colors#8, cols#80, lines#25, ncv#3, pairs#64,
7548 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7549 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7550 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7551 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
7552 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
7553 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7554 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7555 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7556 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7557 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
7558 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
7559 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
7560 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
7561 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
7562 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
7563 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
7564 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
7565 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
7566 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
7567 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
7568 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
7569 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, kf63=\EF^L,
7570 kf7=\EF7, kf8=\EF8, kf9=\EF9, kich1=\E[L, kll=\E[U, knp=\E[T,
7571 kpp=\E[S, ll=\E[U, nel=^M^J, op=\E[m, rc=\E[u, rev=\E[7m,
7572 ri=\E[T, rin=\E[%p1%dT, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
7573 rmul=\E[m, rs1=\Ec, sc=\E[s, setab=\E[4%p1%dm,
7574 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%dm,
7575 setf=\E[%p1%{30}%+%dm, sgr0=\E[0m, smcup=\E[s\E[1b,
7576 smso=\E[7m, smul=\E[4m, kf64=\EF$,
7578 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
7579 lines#35, use=opennt,
7581 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
7582 lines#50, use=opennt,
7584 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
7585 lines#60, use=opennt,
7587 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
7588 lines#100, use=opennt,
7590 # OpenNT wide terminals
7591 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
7592 cols#125, use=opennt,
7594 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
7595 lines#35, use=opennt-w,
7597 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
7598 lines#50, use=opennt-w,
7600 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
7601 lines#60, use=opennt-w,
7603 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
7604 cols#132, use=opennt,
7606 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
7607 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
7608 rmcup@, smcup@, use=opennt,
7610 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
7611 lines#35, use=opennt-nti,
7613 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
7614 lines#50, use=opennt-nti,
7616 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
7617 lines#60, use=opennt-nti,
7619 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
7620 lines#100, use=opennt-nti,
7622 ######## COMMON TERMINAL TYPES
7624 # This section describes terminal classes and maker brands that are still
7625 # quite common, but have proprietary command sets not blessed by ANSI.
7630 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7631 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7632 # Acer has a web site at http://www.acer.com.
7634 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7635 # His comments suggest they were shipped with the system.
7638 # (altos2: had extension capabilities
7639 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7640 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7641 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7642 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7643 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7644 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7645 # :HL=^AP\r:SP=\E[i:\
7646 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7647 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7648 # Comparison with the k* capabilities makes it obvious that the c* things are
7649 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7650 # :sr: was given as a boolean-- esr)
7651 altos2|alt2|altos-2|altos II,
7652 cols#80, it#8, lines#24, xmc#0,
7653 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7654 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7655 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7656 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
7657 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7658 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7659 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7660 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7661 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7662 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7663 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7664 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7665 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7666 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7667 # (altos3: had extension capabilities
7668 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7669 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7670 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7671 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7672 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7673 # :HL=^AP\r:SP=\E[i:\
7674 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7675 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7676 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7677 altos4|alt4|altos-4|altos IV,
7679 # (altos7: had extension capabilities:
7680 # :GG#0:GI=\EH8:GF=\EH7:\
7681 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7682 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7683 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7684 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7685 # Comparison with the k* capabilities makes it obvious that the c* things are
7686 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7687 # also made this entry relative to adm12 in order to give it an <sgr>. The
7688 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7689 altos7|alt7|altos VII,
7691 cols#80, lines#24, xmc#0,
7692 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7693 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7694 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7695 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7697 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7698 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7699 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7700 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7701 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7702 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7703 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7704 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7705 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
7706 rmir=\Er, smir=\Eq, use=adm+sgr,
7707 altos7pc|alt7pc|altos PC VII,
7708 kend=\ET, use=altos7,
7710 #### Hewlett-Packard (hp)
7713 # 8000 Foothills Blvd
7714 # Roseville, CA 95747
7715 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7716 # 1-(800)-633-3600 (General customer support)
7719 # As of March 1998, HP no longer has any terminals in production.
7720 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7721 # supported (they still have parts). So are the 2392a and 2394a.
7722 # See the WORKSTATION CONSOLES section for the 700s.
7725 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7726 hpgeneric|hp|hewlett-packard generic terminal,
7727 OTbs, OTpt, am, da, db, mir, xhp,
7728 cols#80, lines#24, lm#0, vt#6,
7729 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7730 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7731 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7732 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7733 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7736 hp110|hewlett-packard model 110 portable,
7737 lines#16, use=hpgeneric,
7739 hp+pfk+cr|hp function keys with CR,
7740 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7741 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7743 hp+pfk-cr|hp function keys w/o CR,
7744 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7747 # The hp2621s use the same keys for the arrows and function keys,
7748 # but not separate escape sequences. These definitions allow the
7749 # user to use those keys as arrow keys rather than as function
7751 hp+pfk+arrows|hp alternate arrow definitions,
7752 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7753 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7754 kll=\Eq\r, kri=\Es\r,
7756 hp+arrows|hp arrow definitions,
7757 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7758 kind=\ES, kll=\EF, kri=\ET,
7760 # Generic stuff from the HP 262x series
7762 hp262x|HP 262x terminals,
7764 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7765 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7766 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7767 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7768 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7769 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
7770 %;%?%p4%t%{65}%|%;%c,
7771 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7773 # Note: no <home> on HPs since that homes to top of memory, not screen.
7774 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7775 # transmit anything at all is to turn on the function key labels
7776 # with <smkx>, and even then the user has to hold down shift!
7777 # The default 2621 turns off the labels except when it has to to
7778 # enable the function keys. If your installation prefers labels
7779 # on all the time, or off all the time (at the "expense" of the
7780 # function keys), use 2621-nl or 2621-wl.
7782 # Note: there are newer ROMs for 2621's that allow you to set
7783 # strap A so the regular arrow keys xmit \EA, etc, as with the
7784 # 2645. However, even with this strap set, the terminal stops
7785 # xmitting if you reset it, until you unset and reset the strap!
7786 # Since there is no way to set/unset the strap with an escape
7787 # sequence, we don't use it in the default.
7788 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7789 hp2621-ba|2621 w/new rom and strap A set,
7790 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7792 # hp2621 with function labels. Most of the time they are off,
7793 # but inside vi, the function key labels appear. You have to
7794 # hold down shift to get them to xmit.
7795 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7796 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7800 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7801 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7802 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7803 use=hp+pfk+cr, use=hpgeneric,
7805 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7806 hp2621p|hp 2621 with printer,
7807 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7809 hp2621p-a|hp2621p with fn as arrows,
7810 use=hp+pfk+arrows, use=hp2621p,
7812 # hp2621 with k45 keyboard
7813 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7814 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7815 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7817 # 2621 using all 48 lines of memory, only 24 visible at any time.
7818 hp2621-48|48 line 2621,
7820 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7823 # 2621 with no labels ever. Also prevents vi delays on escape.
7824 hp2621-nl|hp 2621 with no labels,
7825 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7828 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7831 hp2621-nt|hp 2621 w/no tabs,
7834 # Hp 2624 B with 4 or 10 pages of memory.
7836 # Some assumptions are made with this entry. These settings are
7837 # NOT set up by the initialization strings.
7839 # Port Configuration
7844 # Terminal Configuration
7850 # Note: the 2624 DOES have a true <home>, believe it or not!
7852 # The 2624 has an "error line" to which messages can be sent.
7853 # This is CLOSE to what is expected for a "status line". However,
7854 # after a message is sent to the "error line", the next carriage
7855 # return is EATEN and the "error line" is turned back off again!
7856 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7858 # This entry supports emacs (and any other program that uses raw
7859 # mode) at 4800 baud and less. I couldn't get the padding right
7862 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7863 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7866 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
7868 # This hp2626 entry does not use any of the fancy windowing stuff
7871 # Indeed, terminfo does not yet handle such stuff. Since changing
7872 # any window clears memory, it is probably not possible to use
7873 # this for screen opt.
7875 # ed is incredibly slow most of the time - I am guessing at the
7876 # exact padding. Since the terminal uses xoff/xon this is intended
7877 # only for cost computation, so that the terminal will prefer el
7878 # or even dl1 which is probably faster!
7880 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7881 # extra slow on the last line of the window.
7883 # The padding probably should be changed.
7885 hp2626|hp2626a|hp2626p|hp 2626,
7888 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7889 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7890 use=hp+labels, use=scrhp,
7892 # This entry is for sysline. It allocates a 23 line window with
7893 # a 115 line workspace for regular use, and a 1 line window for
7896 # This assumes port 2 is being used.
7897 # Turn off horizontal line, Create ws #1 with 115 lines,
7898 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7899 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7900 # Note that this clears the tabs so it must be done by tset before
7903 hp2626-s|hp 2626 using only 23 lines,
7906 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7907 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
7908 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
7909 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7910 # Force terminal back to 24 lines after being 23.
7911 hp2626-ns|hp 2626 using all 24 lines,
7912 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
7913 \s\E&w3f2I\s\E&w7f2p1I\s\r,
7915 # Various entries useful for small windows on 2626.
7916 hp2626-12|hewlett-packard 2626 12 lines,
7917 lines#12, use=hp2626,
7918 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7919 cols#40, lines#12, use=hp2626,
7920 hp2626-x40|hewlett-packard 2626 40 columns,
7921 cols#40, use=hp2626,
7922 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7923 lines#11, use=hp2626-s,
7926 # hp2627 color tubes from University of Wisconsin
7928 hp2627a-rev|hp 2627 with reverse video colors,
7929 cr=^M, cud1=^J, ht=^I, ind=^J,
7930 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
7932 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
7933 smul=\E&dD\E&v1S, use=hp2621-nl,
7934 hp2627a|hp 2627 color terminal with no labels,
7935 cr=^M, cud1=^J, ht=^I, ind=^J,
7936 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7937 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
7938 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7940 hp2627c|hp 2627 color (cyan) terminal with no labels,
7941 cr=^M, cud1=^J, ht=^I, ind=^J,
7942 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7943 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
7945 # hp2640a doesn't have the Y cursor addressing feature, and C is
7946 # memory relative instead of screen relative, as we need.
7949 cup@, rmkx@, smkx@, use=hp2645,
7951 hp2640b|hp2644a|hp 264x series,
7952 rmkx@, smkx@, use=hp2645,
7954 # (hp2641a: removed unknown :gu: -- esr)
7955 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7956 am, da, db, mir, xhp,
7958 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7959 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7960 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7961 if=/usr/share/tabset/std, il1=\EL, ind=^J,
7962 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7963 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7966 # This terminal should be used at 4800 baud or less. It needs padding for
7967 # plain characters at 9600, I guessed at an appropriate cr delay. It really
7968 # wants ^E/^F handshaking, but that doesn't work well even if you write
7969 # software to support it.
7970 hp2645|hp45|HP 2645 series,
7972 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
7973 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7974 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
7975 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
7977 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
7978 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
7979 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
7980 # You should use this terminal at 4800 baud or less.
7981 hp2648|hp2648a|HP 2648a graphics terminal,
7982 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
7983 dch1=\EP$<7>, ip=$<5>, use=hp2645,
7985 # The HP 150 terminal is a fairly vanilla HP terminal, with the
7986 # clreol standout problem. It also has graphics capabilities and
7987 # a touch screen, which we don't describe here.
7988 hp150|hewlett packard Model 150,
7991 # HP 2382a terminals, "the little ones." They don't have any
7992 # alternate character set support and sending out ^N/^O will
7993 # leave the screen blank.
7994 hp2382a|hp2382|hewlett packard 2382a,
7998 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8001 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8002 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8003 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8005 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8007 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8008 use=hp+pfk+arrows, use=hp2621-fl,
8010 # newer hewlett packard terminals
8012 newhpkeyboard|generic entry for HP extended keyboard,
8013 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8014 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8015 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8016 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8019 newhp|generic entry for new hewlett packard terminals,
8020 am, bw, mir, xhp, xon,
8021 cols#80, lines#24, pb#4800,
8022 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8024 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
8025 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8026 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
8027 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
8028 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8029 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8030 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8031 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8032 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8033 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8034 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8035 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8036 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8037 tbc=\E3, use=newhpkeyboard,
8039 memhp|memory relative addressing for new HP ttys,
8041 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8042 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8043 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8044 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8046 scrhp|screen relative addressing for new HP ttys,
8047 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8048 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8049 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8050 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8051 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8053 # (hp+labels: added label values from a BRL termcap -- esr)
8054 hp+labels|"standard" label info for new HP ttys,
8056 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8057 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8059 rmln=\E&j@, smln=\E&jB,
8061 hp+printer|"standard" printer info for HP ttys,
8062 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8065 # The new hp2621b is kind of a cross between the old 2621 and the
8066 # new 262x series of machines. It has dip-switched options.
8067 # The firmware has a bug in it such that if you give it a null
8068 # length label, the following character is eaten!
8069 hp2621b|hp 2621b with old style keyboard,
8070 lh#1, lm#48, lw#8, nlab#8,
8071 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8072 kind=\ET, kll=\EF, kri=\ES,
8073 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8074 %;%p2%s\E%{111}%p1%+%c\r,
8075 smln=\E&jB, use=hp2621,
8077 hp2621b-p|hp 2621b with printer,
8078 use=hp+printer, use=hp2621b,
8080 # hp2621b - new 2621b with new extended keyboard
8081 # these are closer to the new 26xx series than the other 2621b
8082 hp2621b-kx|hp 2621b with extended keyboard,
8083 use=newhpkeyboard, use=hp2621b,
8085 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8086 use=hp+printer, use=hp2621b-kx,
8088 # Some assumptions are made in the following entries.
8089 # These settings are NOT set up by the initialization strings.
8091 # Port Configuration
8092 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8094 # Terminal Configuration
8095 # InhHndShk(G)=Yes InhDC2(H)=Yes
8096 # XmitFnctn(A)=No InhEolWrp=No
8099 # Hp 2622a & hp2623a display and graphics terminals
8101 hp2622|hp2622a|hp 2622,
8104 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8106 # The 2623 is a 2622 with extra graphics hardware.
8107 hp2623|hp2623a|hp 2623,
8110 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8111 use=hp+printer, use=hp2624,
8113 # The hewlett packard B can have an optional extra 6 pages of memory.
8114 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8117 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8118 lm#240, use=hp2624b-p,
8120 # Color manipulations for HP terminals
8121 hp+color|hp with colors,
8123 colors#16, ncv#17, pairs#7,
8124 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8125 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8126 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8127 %t1%e.%p7%d%;z%p1%dI,
8128 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8129 I\E&v1b1c6I\E&v1x1y7I,
8130 op=\E&v0S, scp=\E&v%p1%dS,
8132 # <is2> sets the screen to be 80 columns wide
8133 hp2397a|hp2397|hewlett packard 2397A color terminal,
8134 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8136 # HP 700/44 Setup parameters:
8137 # Terminal Mode HP-PCterm
8138 # Inhibit Auto Wrap NO
8139 # Status Line Host Writable
8140 # PC Character Set YES
8141 # Twenty-Five Line Mode YES
8142 # XON/XOFF @128 or 64 (sc)
8143 # Keycode Mode NO or YES (sc)
8144 # Backspace Key BS or BS/DEL
8146 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8147 # \E\\? does not turn off keycode mode
8148 # <smsc> sets alternate start/stop; keycode on
8149 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8152 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8154 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8155 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8156 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8157 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8159 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8160 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8161 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8162 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8163 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8164 kpp=\E[5~, rmam=\E[?7l,
8165 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8166 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8167 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8168 smul=\E[4m, xoffc=g, xonc=e,
8170 # (hp2392: copied <rmir> here from hpex -- esr)
8173 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8174 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8175 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8176 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8179 hpsub|hp terminals -- capability subset,
8180 am, da, db, mir, xhp, xon,
8182 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
8183 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8184 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
8185 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8186 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8187 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8190 # May be used for most 24 x 80 hp terminals,
8191 # but has no padding added, so may allow runover in some terminals at high
8192 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8193 # hp98x5 terminal emulators or hp98x6 consoles.
8194 # Adds xy-cursor addressing, vertical cursor addressing, home,
8195 # last line, and underline capabilities.
8197 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8198 # moved <rmir> here from hpsub -- esr)
8199 hpex|hp extended capabilites,
8200 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
8201 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
8202 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8204 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8205 hp2|hpex2|hewlett-packard extended capabilities newer version,
8206 am, da, db, mir, xhp,
8207 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8208 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
8209 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8210 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8211 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8212 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8213 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8214 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8215 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8216 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8217 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8218 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8219 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8220 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8221 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8222 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8223 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8224 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
8225 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8228 # From: <ddavis@ic.berkeley.edu>
8229 hp236|hp236 internal terminal emulator,
8232 clear=\EF, cnorm=\EDE, cub1=^H,
8233 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8234 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8235 sgr0=\ECI, smso=\EBI,
8237 # This works on a hp300 console running Utah 4.3 BSD
8238 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8239 hp300h|HP Catseye console,
8240 OTbs, am, da, db, mir, xhp,
8241 cols#128, lines#51, lm#0, xmc#0,
8242 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
8243 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8244 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8245 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
8246 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8247 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8248 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8250 # From: Greg Couch <gregc@ernie.berkeley.edu>
8251 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8252 OTbs, am, da, db, mir, xhp,
8253 cols#128, it#8, lines#46, lm#0,
8254 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8255 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8256 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8257 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8258 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8259 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8260 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8261 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8262 tbc=\E3, vpa=\E&a%p1%dY,
8263 # HP 9845 desktop computer from BRL
8264 # (hp9845: removed unknown capability :gu: -- esr)
8266 OTbs, am, da, db, eo, mir, xhp,
8268 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8269 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8270 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
8271 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8272 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
8273 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
8274 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
8275 hp98550|hp98550a|HP 9000 Series 300 color console,
8276 OTbs, am, da, db, mir, xhp,
8277 cols#128, it#8, lines#49, lm#0,
8278 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
8279 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
8280 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
8281 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8282 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
8283 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8284 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
8285 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
8286 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
8287 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
8288 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8289 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
8290 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8291 # From: Victor Duchovni <vic@fine.princeton.edu>
8292 # (hp700-wy: removed obsolete ":nl=^J:";
8293 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
8294 hp700-wy|HP700/41 emulating wyse30,
8295 OTbs, am, bw, mir, msgr,
8296 cols#80, it#8, lines#24, xmc#1,
8297 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8298 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8299 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
8300 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
8301 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
8302 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
8303 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
8304 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
8305 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
8306 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
8307 hp70092|hp70092a|hp70092A|HP 700/92,
8309 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
8310 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
8311 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
8312 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
8313 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8314 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8315 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8316 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8317 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8318 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8319 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
8320 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8321 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8322 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8324 bobcat|sbobcat|HP 9000 model 300 console,
8325 am, da, db, mir, xhp,
8326 cols#128, it#8, lines#47, xmc#0,
8327 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
8328 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
8329 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
8330 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8331 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
8332 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
8333 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
8334 gator-t|HP 9000 model 237 emulating extra-tall AAA,
8335 lines#94, use=gator,
8336 gator|HP 9000 model 237 emulating AAA,
8338 cols#128, it#8, lines#47,
8339 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
8340 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
8341 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
8342 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
8343 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
8344 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
8345 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
8346 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8347 gator-52|HP 9000 model 237 emulating VT52,
8348 cols#128, lines#47, use=vt52,
8349 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
8350 lines#94, use=gator-52,
8354 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
8357 # Honeywell Bull terminal. Its cursor and function keys send single
8358 # control characters and it has standout/underline glitch. Most programs
8359 # do not like these features/bugs. Visual bell is realized by flashing the
8360 # "keyboard locked" LED.
8361 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
8363 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
8364 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
8365 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
8366 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
8367 dku7003|Honeywell Bull DKU 7003 all features described,
8370 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
8371 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8374 #### Lear-Siegler (adm)
8376 # These guys are long since out of the terminals business, but
8377 # in 1995 many current terminals still have an adm type as one of their
8378 # emulations (usually their stupidest, and usually labeled adm3, though
8379 # these `adm3' emulations normally have adm3a+ capabilities).
8381 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
8382 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
8383 # was being held to ground would trigger a send of the top line on the screen.
8384 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
8385 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
8386 # for clearing up this point.)
8388 adm1a|adm1|lsi adm1a,
8391 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8392 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
8397 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8398 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8399 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
8400 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
8401 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8405 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
8406 # The following ADM-3A switch settings are assumed for normal operation:
8407 # SPACE U/L_DISP CLR_SCRN 24_LINE
8408 # CUR_CTL LC_EN AUTO_NL FDX
8409 # Other switches may be set for operator convenience or communication
8410 # requirements. I recommend
8411 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8413 # Most of these terminals required an option ROM to support lower case display.
8414 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8415 # socket, you may be out of luck.
8417 # (adm3a: some capabilities merged in from BRl entry -- esr)
8421 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
8422 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8423 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
8427 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8430 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
8431 rmso=\EG, smso=\EG, use=adm3a+,
8432 # A lot of terminals other than adm11s use these. Wherever you see
8433 # use=adm+sgr with some of its capabilities disabled, try the
8434 # disabled ones. They may well work but not have been documented or
8435 # expressed in the using entry. We'd like to cook up an <sgr> but the
8436 # <rmacs>/<smacs> sequences of the using entries vary too much.
8437 adm+sgr|adm style highlight capabilities,
8438 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8439 smso=\EG4, smul=\EG8,
8440 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8441 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8442 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8443 # be ^Z, according to his entry.
8444 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8445 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8448 OTkn#8, cols#80, lines#24,
8449 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
8450 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8451 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
8452 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8453 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8454 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
8456 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
8457 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
8458 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
8459 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
8460 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
8461 # via BRL. That entry asserted <xmc#1>, but I've left that out because
8462 # neither earlier nor later ADMSs have it -- esr)
8464 # You will need to get into the supervisor setup before you can set
8465 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
8466 # see a lot more setup options.
8468 # While in supervisor setup you can also use following codes:
8470 # Ctrl-P Personality character selections (configure for example what
8471 # arrow keys send, if I recall correctly)
8472 # Ctrl-T tabs 1-80 use left&right to move and up to set and
8473 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
8474 # Ctrl-B Binary setup (probably not needed. I think that everything can
8475 # be set using normal setup)
8476 # Ctrl-A Answerback mode (enter answerback message)
8477 # Ctrl-U User friendly mode (normal setup)
8478 # Ctrl-D Defaults entire setup and function keys from EPROM tables
8479 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
8480 # Ctrl-R Reads both setup and functions keys from NVM.
8481 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
8483 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
8484 # RTS/CTS used nowadays with virtually every modem and computer. 19200
8485 # bps works fine with hardware flow control.
8487 # The following null-modem cable should fix this and enable you to use
8488 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
8489 # set ADM-12+ for DTR handshaking from supervisor setup.
8502 OTbs, OTpt, am, mir,
8503 OTug#1, cols#80, it#8, lines#24,
8504 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8505 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8506 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
8507 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
8508 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
8509 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
8510 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8511 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8512 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
8514 # (adm20: removed obsolete ":kn#7:" -- esr)
8515 adm20|lear siegler adm20,
8517 cols#80, it#8, lines#24,
8518 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
8519 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
8520 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
8521 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
8523 adm21|lear siegler adm21,
8525 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
8526 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=^J, invis@, kbs=^H,
8527 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
8528 use=adm+sgr, use=adm3a,
8529 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
8530 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
8531 # removed bogus-looking \200 from before <cup>. -- esr)
8535 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8536 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8537 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
8538 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
8540 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8541 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8542 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
8543 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
8544 # ADM 31 DIP Switches
8546 # This information comes from two versions of the manual for the
8547 # Lear-Siegler ADM 31.
8551 # +-||||-------------------------------------+
8566 # +----------------------------------------------+
8567 # front of case (keyboard)
8569 # S1 - Data Rate - Modem
8570 # S2 - Data Rate - Printer
8571 # ------------------------
8573 # -------------------
8591 # S3 - Interface/Printer/Attributes
8592 # ---------------------------------
8593 # Printer Busy Control
8596 # off off off Busy not active, CD disabled
8597 # off off on Busy not active, CD enabled
8598 # off on off Busy active on J5-20, CD disabled
8599 # on off off Busy active on J5-19, CD disabled - Factory Set.
8600 # on off on Busy active on J5-19, CD enabled
8602 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
8604 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
8606 # sw6 ON enables printer BUSY active LOW - Factory Setting
8607 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
8609 # sw7 ON - steady cursor - Factory Setting
8610 # OFF - blinking cursor
8612 # sw8 ON causes selected attribute character to be displayed
8613 # OFF causes SPACE to be displayed instead - Factory Setting
8619 # sw4 sw1 sw2 sw3 sw4
8620 # ---------------------------
8621 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
8622 # Current Loop disabled - Factory Setting
8623 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
8625 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
8626 # Current Loop Disabled
8628 # sw5 ON disables dot stretching mode - Factory Setting
8629 # OFF enables dot stretching mode
8630 # sw6 ON enables blanking function
8631 # OFF enables underline function - Factory Setting
8632 # sw7 ON causes NULLS to be displayed as NULLS
8633 # OFF causes NULLS to be displayed as SPACES - Factory Setting
8635 # S5 - Word Structure
8636 # -------------------
8637 # sw1 ON enables BREAK key - Factory Setting
8638 # OFF disables BREAK key
8639 # sw2 ON selects 50Hz monitor refresh rate
8640 # OFF selects 60Hz monitor refresh rate - Factory Setting
8642 # Modem Port Selection
8645 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
8646 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
8647 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
8648 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
8649 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
8650 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8651 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8652 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8654 # sw6 ON sends bit 8 a 1 (mark)
8655 # OFF sends bit 8 as 0 (space) - Factory Setting
8656 # sw7 ON selects Block Mode
8657 # OFF selects Conversation Mode - Factory Setting
8658 # sw8 ON selects Full Duplex operation
8659 # OFF selects Half Duplex operation - Factory Setting
8663 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8665 # Printer Port Selection
8666 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8668 # sw8 ON enables Printer Port
8669 # OFF disables Printer Port - Factory Setting
8671 # S7 - Polling Address
8672 # --------------------
8673 # sw1-7 Establish ASCII character which designates terminal polling address
8675 # OFF = logic 1 - Factory Setting
8676 # sw8 ON enables Polling Option
8677 # OFF disables Polling Option - Factory Setting
8680 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8682 # This adm31 entry uses underline as the standout mode.
8683 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8684 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8685 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8686 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8687 adm31|lsi adm31 with sw6 set for underline mode,
8690 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8691 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8692 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
8693 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8694 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8695 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8696 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8697 adm31-old|o31|old adm31,
8698 rmul@, smso=\EG4, smul@, use=adm31,
8699 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8703 if=/usr/share/tabset/vt100,
8704 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
8705 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8709 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8710 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8711 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8712 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
8713 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
8714 smir=\Eq, smul@, use=adm+sgr,
8715 # The following termcap for the Lear Siegler ADM-42 leaves the
8716 # "system line" at the bottom of the screen blank (for those who
8717 # find it distracting otherwise)
8718 adm42-ns|lsi adm-42 with no system line,
8719 cbt=\EI\EF \011, clear=\E;\EF \011,
8720 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8721 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8722 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8723 smir=\Eq\EF \011, use=adm42,
8724 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8725 # The insert mode of this terminal is commented out because it's broken for our
8726 # purposes in that it will shift the position of every character on the page,
8727 # not just the cursor line!
8728 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8729 adm1178|1178|lsi adm1178,
8731 cols#80, lines#24, xmc#1,
8732 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
8733 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8734 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8735 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
8736 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
8737 sgr0=\E), smso=\EG4, smul=\EG1,
8741 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8742 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8743 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8745 # ComputerVision Services
8746 # 500 Old Connecticut Path
8750 # Standout mode is dim reverse-video.
8751 pt100|pt200|wren|fenix|prime pt100/pt200,
8753 cols#80, it#8, lines#24,
8754 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
8755 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8756 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8757 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8758 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8759 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
8760 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
8761 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8763 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
8765 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8766 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8768 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8770 rmso@, smso@, use=pt100,
8771 pt250w|Prime PT250 in 132-column mode,
8772 rmso@, smso@, use=pt100w,
8777 # 3475-A North 1st Street
8779 # Vox: (800)-457-4447
8780 # Fax: (408)-473-1510
8781 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8783 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8784 # group and production division.
8786 # Discontinued Qume models:
8788 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8789 # built to replace them, and a qvt119+ which was a 101+ with available wide
8790 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8791 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8792 # ANSI-compatible terminals with the qvt323 and qvt61.
8794 # Current Qume models (as of February 1995):
8796 # All current Qume terminals have ANSI-compatible operation modes.
8797 # Qume is still producing the qvt62, which features emulations for other
8798 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8799 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8800 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8801 # model is the qvt520, which is vt420-compatible.
8803 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8805 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8806 # setup mode. Shift-s should be a configuration save to NVRAM.
8808 qvt101|qvt108|qume qvt 101 and QVT 108,
8811 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8812 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8813 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8814 # What seems to be going on here is that this entry was designed so that
8815 # the normal highlight is bold and standout is dim plus something else
8816 # (reverse-video maybe? But then, are there two <rev> sequences?)
8818 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8819 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8820 qvt101+|qvt101p|qume qvt 101 PLUS product,
8822 cols#80, lines#24, xmc#0,
8823 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
8824 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8825 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8826 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8827 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8828 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8829 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8830 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8831 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8832 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8833 qvt102|qume qvt 102,
8834 cnorm=\E., use=qvt101,
8835 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8836 qvt103|qume qvt 103,
8838 cols#80, it#8, lines#24, vt#3,
8839 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8840 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
8841 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8842 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8843 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8844 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8845 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8846 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8847 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8848 rmso=\E[m$<2>, rmul=\E[m$<2>,
8849 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8850 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
8852 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8853 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8854 qvt103-w|qume qvt103 132 cols,
8856 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8857 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8859 cols#80, lines#24, xmc#0,
8860 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
8861 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8862 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8863 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
8864 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
8865 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8866 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8867 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8868 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8869 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8870 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8871 lines#25, use=qvt119+,
8872 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8874 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8875 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8876 lines#25, use=qvt119+,
8877 qvt203|qvt203+|qume qvt 203 Plus,
8878 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8879 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8880 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8881 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8882 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8884 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8886 # Since a command is present for enabling 25 data lines,
8887 # a specific terminfo entry may be generated for the 203.
8888 # If one is desired for the QVT 119 PLUS then 25 lines must
8889 # be selected in the status line (setup line 9).
8891 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8893 is2=\E[=40h\E[?3l, use=qvt203,
8894 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8896 rs2=\E[?3h\E[=40h, use=qvt203,
8898 #### Televideo (tvi)
8901 # 550 East Brokaw Road
8902 # PO Box 49048 95161
8904 # Vox: (408)-954-8333
8905 # Fax: (408)-954-0623
8908 # These require incredible amounts of padding.
8910 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8911 # Televideo terminals are ANSI and PC-ANSI compatible.
8913 tvi803|televideo 803,
8914 clear=\E*$<10>, use=tvi950,
8916 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8917 # Switch settings are:
8938 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8954 # U do CR/LF when CR received
8955 # D do CR when CR received
8977 # S2 6 Cursor down key
8981 # S2 7 Screen colour
8985 # S2 8 DSR status (pin 6)
8989 # S2 9 DCD status (pin 8)
8993 # S2 10 DTR status (pin 20)
8996 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
8997 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
8998 tvi910|televideo model 910,
9000 cols#80, it#8, lines#24, xmc#1,
9001 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9002 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9003 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
9004 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
9005 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9006 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9007 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9008 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9009 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9010 # as subsequently hacked over by someone at SCO
9011 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9013 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9016 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9017 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9018 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9019 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9022 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9023 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9024 # D U D D 8O1 D U U U 8E2
9026 # S1 9 Autowrap (U = on, D = off)
9027 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9028 # S2 1 Mode (U = block, D = conversational)
9029 # S2 2 Duplex (U = half, D = full)
9030 # S2 3 Hertz (U = 50, D = 60)
9031 # S2 4 Edit mode (U = local, D = duplex)
9032 # S2 5 Cursor type (U = underline, D = block)
9033 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9034 # S2 7 Screen colour (U = green on black, D = black on green)
9035 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9036 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9037 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9039 tvi910+|televideo 910+,
9040 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9041 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9042 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9043 ll=\E=7\s, use=tvi910,
9045 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9046 # <khome> from BRL entry -- esr)
9047 tvi912|tvi914|tvi920|old televideo 912/914/920,
9048 OTbs, OTpt, am, msgr,
9049 cols#80, it#8, lines#24, xmc#1,
9050 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9051 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9052 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9053 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9054 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
9055 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9056 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9057 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9059 # We got some new tvi912c terminals that act really weird on the regular
9060 # termcap, so one of our gurus worked this up. Seems that cursor
9061 # addressing is broken.
9062 tvi912cc|tvi912 at cowell college,
9065 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9066 # From: Benjamin C. W. Sittler
9068 # Someone has put a scanned copy of the manual online at:
9069 # http://vt100.net/televideo/912b-om/
9071 # These terminals were produced ca. 1979, and had a 12" monochrome
9072 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9073 # ASCII, and were generally similar to adm3a but with attributes
9074 # (including some with magic cookies), fancy half-duplex mode, and
9077 # Some operations reqire truly incredible amounts of padding. The
9078 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9079 # are so slow as to be nearly unusable.
9081 # There may or may not have been a separate, earlier series of 912/920
9082 # terminals (without the "B" and "C" suffix); I have never seen one,
9083 # and the manual only describes the "B" and "C" series. The 912 and 920
9084 # are quite distinct from the 914 and 924, which were much nicer non-
9085 # magic-cookie terminals similar to the 950.
9087 # This is a new description for the following TeleVideo terminals,
9088 # distinguished chiefly by their keyboards:
9090 # TVI-912B - very odd layout, no function keys (84 keys)
9091 # TVI-920B - typewriter layout, no function keys (103 keys)
9092 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9093 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9095 # To choose a setting for the TERM variable, start with the model:
9097 # Model || base name
9098 # ----------||-----------
9099 # TVI-912B || tvi912b
9100 # TVI-912C || tvi912c
9101 # TVI-920B || tvi920b
9102 # TVI-920C || tvi920c
9104 # Then add a suffix from the following table describing installed options
9105 # and how you'd like to use the terminal:
9107 # Use Video | Second | Visual | Magic | Page || feature
9108 # Attributes | Page | Bell | Cookies | Print || suffix
9109 # ------------|--------|--------|---------|-------||---------
9110 # No | No | N/A | N/A | No || -unk
9111 # No | No | N/A | N/A | Yes || -p
9112 # No | Yes | No | N/A | No || -2p-unk
9113 # No | Yes | No | N/A | Yes || -2p-p
9114 # No | Yes | Yes | N/A | No || -vb-unk
9115 # No | Yes | Yes | N/A | Yes || -vb-p
9116 # Yes | No | N/A | No | N/A ||
9117 # Yes | No | N/A | Yes | N/A || -mc
9118 # Yes | Yes | No | No | N/A || -2p
9119 # Yes | Yes | No | Yes | N/A || -2p-mc
9120 # Yes | Yes | Yes | No | N/A || -vb
9121 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9123 # So e.g. a model 920 C with second page memory option, visual bell
9124 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9125 # second page memory option and using magic cookies would be
9130 # At 9600 baud, the terminal is prone to overflow its input buffer
9131 # during complex operations (insert/delete
9132 # character/line/screen/page), and it does not signal this over the
9133 # RS232 cable. The typical symptom of an overrun is that the terminal
9134 # starts beeping, and output becomes garbled.
9136 # The padding delays in this terminfo were derived using tack(1)
9137 # running on a Linux box connected to a TVI-920C with a later-model
9138 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9139 # vary. The numbers below seem to give the terminal enough time so
9140 # that it doesn't overflow its input buffer and start losing
9145 # If you want to use the FUNCT key on a tvi912[bc], use the
9146 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9147 # the following table (these also work on the 920 series):
9149 # Unshifted Function Keys:
9151 # Key | capname|| Equivalent
9152 # -----|--------||------------
9153 # F1 | <kf1> || FUNCT + @
9154 # F2 | <kf2> || FUNCT + A
9155 # F3 | <kf3> || FUNCT + B
9156 # F4 | <kf4> || FUNCT + C
9157 # F5 | <kf5> || FUNCT + D
9158 # F6 | <kf6> || FUNCT + E
9159 # F7 | <kf7> || FUNCT + F
9160 # F8 | <kf8> || FUNCT + G
9161 # F9 | <kf9> || FUNCT + H
9162 # F10 | <kf10> || FUNCT + I
9163 # F11 | <kf11> || FUNCT + J
9165 # Shifted Function Keys:
9167 # SHIFT + Key | capname|| Equivalent
9168 # -------------|--------||------------
9169 # SHIFT + F1 | <kf12> || FUNCT + `
9170 # SHIFT + F2 | <kf13> || FUNCT + a
9171 # SHIFT + F3 | <kf14> || FUNCT + b
9172 # SHIFT + F4 | <kf15> || FUNCT + c
9173 # SHIFT + F5 | <kf16> || FUNCT + d
9174 # SHIFT + F6 | <kf17> || FUNCT + e
9175 # SHIFT + F7 | <kf18> || FUNCT + f
9176 # SHIFT + F8 | <kf19> || FUNCT + g
9177 # SHIFT + F9 | <kf20> || FUNCT + h
9178 # SHIFT + F10 | <kf21> || FUNCT + i
9179 # SHIFT + F11 | <kf22> || FUNCT + j
9181 # PORTS AND SWITCH SETTINGS
9183 # Here are the switch settings for the TVI-912B/TVI-920B and
9184 # TVI-912C/TVI-920C:
9186 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9187 # 2: 9600 3: 4800 4: 2400 5: 1200
9188 # 6: 600 7: 300 8: 150 9: 75
9191 # S2 UART/Terminal options:
9193 # 1: Not used Not allowed
9194 # 2: Alternate character set Standard character set
9195 # 3: Full duplex Half duplex
9196 # 4: 50 Hz refresh 60 Hz refresh
9197 # 5: No parity Send parity
9198 # 6: 2 stop bits 1 stop bit
9199 # 7: 8 data bits 7 data bits
9200 # 8: Not used Not allowed on Rev E or lower
9201 # 9: Even parity Odd parity
9202 # 10: Steady cursor Blinking cursor
9203 # (On Rev E or lower, use W25 instead of switch 10.)
9205 # S5 UART/Terminal options:
9207 # 1: P3-6 Not connected DSR received on P3-6
9208 # 2: P3-8 Not connected DCD received on P3-8
9210 # 3 Open, 4 Open: P3-20 Not connected
9211 # 3 Open, 4 Closed: DTR on when terminal is on
9212 # 3 Closed, 4 Open: DTR is connected to RTS
9213 # 3 Closed, 4 Closed: Not allowed
9215 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9216 # all data transmitted out of the modem port (P3) will also be
9217 # transmitted out of the printer port (P4).
9219 # 6 Open, 7 Open: Not allowed
9220 # 6 Open, 7 Closed: 20ma current loop input
9221 # 6 Closed, 7 Open: RS232 input
9222 # 6 Closed, 7 Closed: Not allowed
9225 # If the jumper is installed, the effect will occur (the next time the terminal
9228 # S4/W31: Enables automatic LF upon receipt of CR from
9229 # remote or keyboard.
9230 # S4/W32: Enables transmission of EOT at the end of Send. If not
9231 # installed, a carriage return is sent.
9232 # S4/W33: Disables automatic carriage return in column 80.
9233 # S4/W34: Selects Page Print Mode as initial condition. If not
9234 # installed, Extension Mode is selected.
9236 # NON-STANDARD CAPABILITIES
9238 # Sending <u9> or <u7> returns a cursor position report in the format
9239 # YX\r, where Y and X are as in <cup>. This format is described in
9240 # <u8> and <u6>, but it's not clear how one should write an
9241 # appropriate scanf string, since we need to subtract %' ' from the
9242 # character after reading it. The <u9> capability is used by tack(1)
9243 # to synchronize during padding tests, and seems to work for that
9246 # This description also includes the obsolete termcap capabilities
9247 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9249 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9251 # The FUNCT modifier actually works with every normal key by sending
9252 # ^AX\r, where X is the sequence normally sent by that key. This is a
9253 # sort of meta key not currently describable in terminfo.
9255 # There are quite a few other keys (especially on the 920 models,) but
9256 # they are for the most part only useful in block mode.
9258 # These terminals have lots of forms manipulation features, mainly
9259 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9260 # spaces"; nulls are sentinels for "send X" operations); "send X"
9261 # operations for uploading all or part of the screen; and block-mode
9262 # editing keys (they don't send escape sequences, but manipulate video
9263 # memory directly). Block mode is used for local editing, and protect
9264 # mode (in conjunction with the "write protect" attribute,
9265 # a.k.a. half-intensity outside of protect mode) is used to control
9266 # which parts of the screen are edited/sent/printed (by <mc0>).
9268 # There are at least two major families of ROM, "early" and
9269 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9270 # support a few extra escape sequences for manipulating the off-screen
9271 # memory page, and for sending whole pages back to the host (mainly
9272 # useful in block mode.) The descriptions in this file don't use any
9273 # of those sequences: set cursor position including page (\E-PYX,
9274 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
9275 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
9276 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
9277 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
9278 # are as in <cup>, and some "send page" features mainly useful for
9279 # forms manipulation.
9281 # The keyboard enable (\E") and disable (\E#) sequences are unused,
9282 # except that a terminal reset (<is2>) enables the keyboard.
9284 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
9285 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
9289 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
9290 # sequences (I infer that in some TeleVideo terminal they may invert
9291 # and uninvert the display) so the <flash> sequence given here is a
9292 # cheesy page-flip instead.
9294 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
9295 # tack(1), so it is not included in the descriptions below.
9297 # It's not clear whether auto_left_margin (<bw>) flag should be set
9298 # for these terminals; tack says yes, so it is set here, but this
9299 # differs from other descriptions I've seen.
9301 # Extension print mode (<mc5>) echoes all characters to the printer
9302 # port [in addition to displaying them] except for the page print mode
9303 # sequence (<mc4>); this is a slight violation of the terminfo
9304 # definition for <mc5> but I don't expect it to cause problems. We
9305 # reset to page print mode in <rs1> since it may have been enabled
9308 # The descriptions with plus signs (+) are building blocks.
9310 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
9312 cols#80, it#8, lines#24,
9313 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9314 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
9315 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
9316 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
9317 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
9318 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
9319 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
9320 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
9321 u7=\E?, u8=%c%c\r, u9=\E?,
9323 # This isn't included in the basic capabilities because it is
9324 # typically unusable in combination with the full range of video
9325 # attributes, since the magic cookie attributes turn into ASCII
9326 # control characters, and the half-intensity ("protected") attribute
9327 # converts all affected characters to spaces.
9329 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
9332 # This uses half-intensity mode (<dim>) for standout (<smso>), and
9333 # exposes no other attributes (half-intensity is the only attribute
9334 # that does not generate a magic cookie.)
9336 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
9338 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
9341 # Full magic-cookie attribute support, with half-intensity reverse
9342 # video for standout. Note that we add a space in the <dim> sequence
9343 # to give a consistent magic-cookie count. Also note that <sgr> uses
9344 # backspacing (in the TVI-supported order) to apply all requested
9345 # attributes with only a single magic cookie.
9347 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
9349 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
9351 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
9352 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
9353 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
9355 # This uses the second page memory option to save & restore screen
9356 # contents. If your terminal is missing the option, this description
9357 # should still work, but that has not been tested.
9359 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
9360 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
9361 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
9363 # This simulates flashing by briefly toggling to the other page
9366 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
9367 bel=\EK$<100>\EK, use=tvi912b+2p,
9369 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
9371 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
9372 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
9373 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
9374 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
9375 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9376 kf8=^AG\r, kf9=^AH\r,
9378 # Combinations of the basic building blocks
9380 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
9381 use=tvi912b+2p, use=tvi912b-unk,
9383 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
9384 use=tvi912b+vb, use=tvi912b-unk,
9386 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
9387 use=tvi912b+printer, use=tvi912b-unk,
9389 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
9390 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
9392 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
9393 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
9395 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
9396 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
9398 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
9399 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
9401 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
9402 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
9404 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
9405 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
9407 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9408 use=tvi912b+dim, use=tvi912b-unk,
9410 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9411 use=tvi912b+mc, use=tvi912b-unk,
9413 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9414 use=tvi920b+fn, use=tvi912b-unk,
9416 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9417 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9419 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9420 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9422 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9423 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9425 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9426 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9429 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9430 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9433 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9434 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9437 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9438 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9441 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9442 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9445 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9446 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9449 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9450 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
9452 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
9453 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
9455 # Televideo 921 and variants
9456 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
9457 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
9458 # also added empty <acsc> to suppress tic warning -- esr)
9459 tvi921|televideo model 921 with sysline same as page & real vi function,
9460 OTbs, OTpt, am, hs, xenl, xhp,
9461 cols#80, lines#24, xmc#0,
9462 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
9463 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9464 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9465 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
9466 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
9467 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
9468 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
9469 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
9470 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
9471 # without the beeper
9472 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
9473 # also added empty <acsc> to suppress tic warning -- esr)
9474 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
9476 cols#80, lines#24, xmc#0,
9477 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
9478 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9479 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9480 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
9481 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
9482 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
9483 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9484 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
9485 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
9486 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
9487 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
9488 dl1=\ER$<2*/>, il1=\EE$<2*/>,
9489 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
9490 kil1=\EE$<2*/>, use=tvi92B,
9492 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
9493 # in from a BSD termcap file because it looks like they do something the
9494 # old ones skip -- esr)
9495 tvi924|televideo tvi924,
9496 am, bw, hs, in, mir, msgr, xenl, xon,
9497 cols#80, it#8, lines#24, wsl#80, xmc#0,
9498 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
9499 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
9500 cub1=^H, cud1=^V, cuf1=^L,
9501 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
9502 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
9503 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
9504 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
9505 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
9506 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9507 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
9508 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
9509 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
9510 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
9511 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
9512 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
9513 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
9516 # TVI925 DIP switches. In each of these, D = Down and U = Up,
9518 # Here are the settings for the external (baud) switches (S1):
9521 # 7 8 9 10 [Printer]
9522 # 1 2 3 4 [Main RS232]
9523 # -----------------------------------------------------
9542 # Settings for word length and stop-bits (S1)
9544 # Position Description
9546 # ---------------------------
9553 # S2 (external) settings
9555 # Position Up Dn Description
9556 # --------------------------------------------
9558 # X Duplex edit (transmit editing keys)
9559 # --------------------------------------------
9560 # 2 X 912/920 emulation
9562 # --------------------------------------------
9566 # --------------------------------------------
9570 # --------------------------------------------
9574 # --------------------------------------------
9578 # --------------------------------------------
9582 # --------------------------------------------
9583 # 6 X White on black display
9584 # X Black on white display
9585 # --------------------------------------------
9588 # --------------------------------------------
9591 # --------------------------------------------
9594 # --------------------------------------------
9597 # --------------------------------------------
9598 # 10 X CR/LF (Auto LF)
9601 # S3 (internal switch) settings:
9603 # Position Up Dn Description
9604 # --------------------------------------------
9607 # --------------------------------------------
9610 # --------------------------------------------
9613 # --------------------------------------------
9616 # --------------------------------------------
9619 # --------------------------------------------
9620 # 4 X Blinking block cursor
9622 # --------------------------------------------
9623 # 4 X Blinking underline cursor
9625 # --------------------------------------------
9626 # 4 X Steady block cursor
9628 # --------------------------------------------
9629 # 4 X Steady underline cursor
9631 # --------------------------------------------
9632 # 6 X Screen blanking timer (ON)
9633 # X Screen blanking timer (OFF)
9634 # --------------------------------------------
9635 # 7 X Page attributes
9637 # --------------------------------------------
9638 # 8 X DCD disconnected
9640 # --------------------------------------------
9641 # 9 X DSR disconnected
9643 # --------------------------------------------
9644 # 10 X DTR Disconnected
9646 # --------------------------------------------
9648 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
9649 tvi925|televideo 925,
9650 OTbs, am, bw, hs, ul,
9651 cols#80, lines#24, xmc#1,
9652 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
9653 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9654 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9655 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
9656 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9657 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9658 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9659 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9660 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9661 tsl=\Eh\Ef, use=adm+sgr,
9662 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9663 # to avoid "magic cookie" standout glitch:
9664 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9666 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
9668 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9669 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9670 # for additional capabilities,
9671 # The following tvi descriptions from B:pjphar and virus!mike
9672 # is for all 950s. It sets the following attributes:
9673 # full duplex (\EDF) write protect off (\E()
9674 # conversation mode (\EC) graphics mode off (\E%)
9675 # white on black (\Ed) auto page flip off (\Ew)
9676 # turn off status line (\Eg) clear status line (\Ef\r)
9677 # normal video (\E0) monitor mode off (\EX or \Eu)
9678 # edit mode (\Er) load blank char to space (\Ee\040)
9679 # line edit mode (\EO) enable buffer control (^O)
9680 # protect mode off (\E\047) duplex edit keys (\El)
9681 # program unshifted send key to send line all (\E016)
9682 # program shifted send key to send line unprotected (\E004)
9683 # set the following to nulls:
9684 # field delimiter (\Ex0\200\200)
9685 # line delimiter (\Ex1\200\200)
9686 # start-protected field delimiter (\Ex2\200\200)
9687 # end-protected field delimiter (\Ex3\200\200)
9688 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9690 # TVI 950 Switch Setting Reference Charts
9694 # S1 1 2 3 4 5 6 7 8 9 10
9695 # +-----------------------+-----+-----+-----------------------+
9696 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9698 # +------+-----------------------+-----+-----+-----------------------+
9699 # | Up | See | 7 | 2 | See |
9700 # +------+-----------------------+-----+-----+-----------------------+
9701 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9702 # +------+-----------------------+-----+-----+-----------------------+
9705 # S2 1 2 3 4 5 6 7 8 9 10
9706 # +-----+-----+-----------------+-----+-----------+-----+-----+
9707 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9708 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9709 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9710 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9711 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9712 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9716 # +-----------+-----+-----+-----+-----+-----------+
9717 # | Display | 1 | 2 | 3 | 4 | Baud |
9718 # +-----------+-----+-----+-----+-----+ |
9719 # | Printer | 7 | 8 | 9 | 10 | Rate |
9720 # +-----------+-----+-----+-----+-----+-----------+
9721 # | D | D | D | D | 9600 |
9722 # | U | D | D | D | 50 |
9723 # | D | U | D | D | 75 |
9724 # | U | U | D | D | 110 |
9725 # | D | D | U | D | 135 |
9726 # | U | D | U | D | 150 |
9727 # | D | U | U | D | 300 |
9728 # | U | U | U | D | 600 |
9729 # | D | D | D | U | 1200 |
9730 # | U | D | D | U | 1800 |
9731 # | D | U | D | U | 2400 |
9732 # | U | U | D | U | 3600 |
9733 # | D | D | U | U | 4800 |
9734 # | U | D | U | U | 7200 |
9735 # | D | U | U | U | 9600 |
9736 # | U | U | U | U | 19200 |
9737 # +-----+-----+-----+-----+-----------+
9740 # +-----+-----+-----+-----------+
9741 # | 3 | 4 | 5 | Parity |
9742 # +-----+-----+-----+-----------+
9743 # | X | X | D | None |
9744 # | D | D | U | Odd |
9745 # | D | U | U | Even |
9746 # | U | D | U | Mark |
9747 # | U | U | U | Space |
9748 # +-----+-----+-----+-----------+
9752 # +-----+-----+-----------------+
9753 # | 7 | 8 | Communication |
9754 # +-----+-----+-----------------+
9755 # | D | D | Half Duplex |
9756 # | D | U | Full Duplex |
9759 # +-----+-----+-----------------+
9761 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9762 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9763 # should be present and all tvi native modes use the same string for this.
9764 # Finally, note that BSD has cud1=^V. -- esr)
9765 tvi950|televideo 950,
9766 OTbs, am, hs, mir, msgr, xenl, xon,
9767 cols#80, it#8, lines#24, xmc#1,
9768 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9769 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9770 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9771 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9772 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
9774 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9775 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9777 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9778 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9779 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9780 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9781 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9782 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9785 # is for 950 with two pages adds the following:
9786 # set 48 line page (\E\\2)
9787 # place cursor at page 0, line 24, column 1 (\E-07 )
9788 # set local (no send) edit keys (\Ek)
9790 # two page 950 adds the following:
9791 # when entering ex, set 24 line page (\E\\1)
9792 # when exiting ex, reset 48 line page (\E\\2)
9793 # place cursor at 0,24,1 (\E-07 )
9794 # set duplex (send) edit keys (\El) when entering vi
9795 # set local (no send) edit keys (\Ek) when exiting vi
9797 tvi950-2p|televideo950 w/2 pages,
9798 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9799 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9801 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9802 smkx=\El, use=tvi950,
9804 # is for 950 with four pages adds the following:
9805 # set 96 line page (\E\\3)
9806 # place cursor at page 0, line 24, column 1 (\E-07 )
9808 # four page 950 adds the following:
9809 # when entering ex, set 24 line page (\E\\1)
9810 # when exiting ex, reset 96 line page (\E\\3)
9811 # place cursor at 0,24,1 (\E-07 )
9813 tvi950-4p|televideo950 w/4 pages,
9814 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9815 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9817 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9818 smkx=\El, use=tvi950,
9820 # <is2> for reverse video 950 changes the following:
9821 # set reverse video (\Ed)
9823 # set vb accordingly (\Ed ...delay... \Eb)
9825 tvi950-rv|televideo950 rev video,
9826 flash=\Ed$<200/>\Eb,
9827 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9828 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
9832 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9833 tvi950-rv-2p|televideo950 rev video w/2 pages,
9834 flash=\Ed$<200/>\Eb,
9835 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9836 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9838 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9839 smkx=\El, use=tvi950,
9841 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9842 tvi950-rv-4p|televideo950 rev video w/4 pages,
9843 flash=\Ed$<200/>\Eb,
9844 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9845 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9847 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9848 smkx=\El, use=tvi950,
9849 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9850 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9851 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9852 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9853 # the :ko: string had :cl: in it, which means that one of the original
9854 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9855 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9856 # ko implies -- esr)
9857 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9859 tvi955|televideo 955,
9862 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9863 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9864 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9865 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9866 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9867 rmam=\E[=7l, rmxon=^N,
9868 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
9870 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9872 tvi955-w|955-w|televideo955 w/132 cols,
9874 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9875 # use half-intensity as normal mode, full intensity as <bold>
9876 tvi955-hb|955-hb|televideo955 half-bright,
9877 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9878 sgr0=\EG0\E[=5h, use=tvi955,
9879 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9880 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9881 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9882 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9883 # it does to the function keys. I deduced <rmam>/<smam>.
9884 # also added empty <acsc> to suppress tic warning, -- esr)
9885 tvi970|televideo 970,
9886 OTbs, OTpt, am, da, db, mir, msgr,
9887 cols#80, it#8, lines#24,
9888 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9889 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9890 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9891 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9892 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9893 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9894 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9895 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9896 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9897 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9898 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9899 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9900 smul=\E[4m, vpa=\E[%i%p1%dd,
9901 tvi970-vb|televideo 970 with visual bell,
9902 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9904 tvi970-2p|televideo 970 with using 2 pages of memory,
9905 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9907 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9908 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9909 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9910 # <smul> strings are klutzy, but at least use no screen space.
9911 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9912 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9913 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9914 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9915 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9916 tvipt|televideo personal terminal,
9919 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9920 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9921 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9922 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
9923 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9924 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9925 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9926 tvi9065|televideo 9065,
9927 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9928 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9930 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9931 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9932 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9933 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9934 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9935 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9936 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9937 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
9938 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9939 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
9941 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9942 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9943 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9944 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9945 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9946 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9947 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
9948 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9949 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9950 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9951 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9952 rep=\E[%p2%db%p1%c, rev=\EG4,
9953 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9954 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9955 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9956 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9957 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
9958 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
9959 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
9960 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9961 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
9963 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
9964 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
9966 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
9967 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
9968 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
9972 # In September 1993, Visual Technology of Westboro, Massachusetts,
9973 # merged with White Pine Software of Nashua, New Hampshire.
9975 # White Pine Software may be contacted at +1 603/886-9050.
9976 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
9979 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
9980 # Recently I hacked together the following termcap for Visual
9981 # Technology's Visual 50 terminal. It's a slight modification of
9983 # It's intended to run when the Visual 50 is in vt52 emulation mode
9984 # (I know what you're thinking; if it's emulating a vt52, then why
9985 # another termcap? Well, it turns out that the Visual 50 can handle
9986 # <dl1> and db(?) among other things, which the vt52 can't)
9987 # The termcap works OK for the most part. The only problem is on
9988 # character inserts. The whole line gets painfully redrawn for each
9989 # character typed. Any suggestions?
9990 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
9991 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
9992 # disguise; <kf7>-<kf9> are really l1-l3.
9994 OTbs, OTpt, am, da, db, msgr,
9995 cols#80, it#8, lines#24,
9996 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
9997 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9998 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
9999 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
10000 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10001 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10002 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10003 # this one was BSD & SCO's vi50
10004 vi50adm|visual 50 in adm3a mode,
10006 cols#80, it#8, lines#24,
10007 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10008 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10009 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
10010 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10011 rmso=\ET, smso=\EU,
10012 # From: Jeff Siegal <jbs@quiotix.com>
10014 OTbs, am, mir, msgr,
10015 cols#80, it#8, lines#24,
10016 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10017 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10018 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10019 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10020 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10021 smir=\Ea, smso=\EU,
10023 # Visual 200 from BRL
10024 # The following switch settings are assumed for normal operation:
10025 # FULL_DUPLEX SCROLL CR
10026 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10027 # Other switches may be set for operator convenience or communication
10029 # Character insertion is kludged in order to get around the "beep" misfeature.
10030 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10031 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10032 # and <dl1> strings, but we seem to get along fine without them.
10034 OTbs, OTpt, am, mir, msgr,
10035 OTkn#10, cols#80, it#8, lines#24,
10036 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
10037 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10038 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
10039 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
10040 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10041 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
10042 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
10043 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
10044 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
10045 rmacs=\EG, rmkx=\E>, rmso=\E3,
10046 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
10047 smkx=\E=, smso=\E4, tbc=\Eg,
10048 # The older Visuals didn't come with function keys. This entry uses
10049 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10050 # If your version of vi doesn't support function keys you may want
10052 vi200-f|visual 200 no function keys,
10053 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10054 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10055 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10057 vi200-rv|visual 200 reverse video,
10058 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10060 # the function keys are programmable but we don't reprogram them to their
10061 # default values with <is2> because programming them is very verbose. maybe
10062 # an initialization file should be made for the 300 and they could be stuck
10064 # (vi300: added <rmam>/<smam> based on init string -- esr)
10065 vi300|visual 300 ansi x3.64,
10068 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
10069 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10070 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10072 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10073 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10074 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10075 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10076 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10077 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10078 smso=\E[1m, smul=\E[4m,
10079 # some of the vi300s have older firmware that has the command
10080 # sequence for setting editing extent reversed.
10081 vi300-old|visual 300 with old firmware (set edit extent reversed),
10082 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10084 # Visual 500 prototype entry from University of Wisconsin.
10085 # The best place to look for the escape sequences is page A1-1 of the
10086 # Visual 500 manual. The initialization sequence given here may be
10087 # overkill, but it does leave out some of the initializations which can
10088 # be done with the menus in set-up mode.
10089 # The :xp: line below is so that emacs can understand the padding requirements
10090 # of this slow terminal. :xp: is 10 time the padding factor.
10091 # (vi500: removed unknown :xp#4: termcap;
10092 # also added empty <acsc> to suppress tic warning -- esr)
10095 cols#80, it#8, lines#33,
10096 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
10097 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10098 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10099 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10100 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10102 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10103 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10104 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
10105 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10107 # The visual 550 is a visual 300 with tektronix graphics,
10108 # and with 33 lines. clear screen is modified here to
10109 # also clear the graphics.
10110 vi550|visual 550 ansi x3.64,
10112 clear=\030\E[H\E[2J, use=vi300,
10114 vi603|visual603|visual 603,
10116 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10117 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10118 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10119 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10120 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10121 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10122 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
10128 # 3471 North First Street
10129 # San Jose, CA 95134
10130 # Vox: (408)-473-1200
10131 # Fax: (408) 473-1222
10132 # Web: http://www.wyse.com
10134 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10135 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10136 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10137 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10140 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10141 # They now own the Qume and Amdek brands, too. So these are the people to
10142 # talk with about all Link, Qume, and Amdek terminals.
10144 # These entries include a few small fixes.
10145 # I canceled the bel capacities in the vb entries.
10146 # I made two trivial syntax fixes in the wyse30 entry.
10147 # I made some entries relative to adm+sgr.
10150 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10152 # Although the Wyse 30 can support more than one attribute
10153 # it requires magic cookies to do so. Many applications do not
10154 # function well with magic cookies. The following terminfo uses
10155 # the protect mode to support one attribute (dim) without cookies.
10156 # If more than one attribute is needed then the wy30-mc terminfo
10159 wy30|wyse30|Wyse 30,
10160 am, bw, hs, mc5i, mir, msgr, xon,
10161 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10162 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10163 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
10164 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10165 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10166 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10167 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10168 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10169 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
10170 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10171 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10172 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10173 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10174 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10175 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10176 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10177 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10178 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10179 smso=\E`7\E), tbc=\E0, tsl=\EF,
10181 # This terminal description uses the non-hidden attribute mode
10182 # (with magic cookie).
10184 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10185 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10188 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10189 rmcup=\EG0, rmso=\EG0,
10190 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10191 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10192 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10193 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10194 smso=\EG4, use=wy30, use=adm+sgr,
10195 # The mandatory pause used by <flash> does not work with
10196 # older versions of terminfo. If you see this effect then
10197 # unset xon and delete the / from the delay.
10198 # i.e. change $<100/> to $<100>
10199 wy30-vb|wyse30-vb|wyse 30 visible bell,
10202 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10203 # Normal) without magic cookies by using the protect mode.
10204 # The following description uses this feature, but when more
10205 # than one attribute is put on the screen at once, all attributes
10206 # will be changed to be the same as the last attribute given.
10207 # The Wyse 50 can support more attributes when used with magic
10208 # cookies. The wy50-mc terminal description uses magic cookies
10209 # to correctly handle multiple attributes on a screen.
10211 wy50|wyse50|Wyse 50,
10212 am, bw, hs, mc5i, mir, msgr, xon,
10213 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10214 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10215 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
10216 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10217 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10218 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
10219 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10220 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10221 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10222 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10223 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10224 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10225 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10226 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10227 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
10228 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10229 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10230 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10231 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10233 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10234 smso=\E`6\E), tbc=\E0, tsl=\EF,
10236 # This terminal description uses the non-hidden attribute mode
10237 # (with magic cookie).
10239 # The mandatory pause used by flash does not work with some
10240 # older versions of terminfo. If you see this effect then
10241 # unset <xon> and delete the / from the delay.
10242 # i.e. change $<100/> to $<100>
10243 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10244 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10247 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10248 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10249 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10250 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10251 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10252 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10253 smso=\EGt, use=wy50, use=adm+sgr,
10254 wy50-vb|wyse50-vb|wyse 50 visible bell,
10256 wy50-w|wyse50-w|wyse 50 132-column,
10257 cols#132, lw#7, nlab#16, wsl#97,
10258 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10260 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
10264 # The Wyse 350 is a Wyse 50 with color.
10265 # Unfortunately this means that it has magic cookies.
10266 # The color attributes are designed to overlap the reverse, dim and
10267 # underline attributes. This is nice for monochrome applications
10268 # because you can make underline stuff green (or any other color)
10269 # but for true color applications it's not so hot because you cannot
10270 # mix color with reverse, dim or underline.
10271 # To further complicate things one of the attributes must be
10272 # black (either the foreground or the background). In reverse video
10273 # the background changes color with black letters. In normal video
10274 # the foreground changes colors on a black background.
10275 # This terminfo uses some of the more advanced features of curses
10276 # to display both color and blink. In the final analysis I am not
10277 # sure that the wy350 runs better with this terminfo than it does
10278 # with the wy50 terminfo (with user adjusted colors).
10280 # The mandatory pause used by flash does not work with
10281 # older versions of terminfo. If you see this effect then
10282 # unset xon and delete the / from the delay.
10283 # i.e. change $<100/> to $<100>
10285 # Bug: The <op> capability resets attributes.
10286 wy350|wyse350|Wyse 350,
10287 am, bw, hs, mc5i, mir, xon,
10288 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
10290 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
10291 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
10292 cub1=^H, cud1=^J, cuf1=^L,
10293 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
10294 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
10295 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
10296 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
10297 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
10298 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10299 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10300 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10301 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10302 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10303 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10304 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
10305 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10306 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
10307 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
10308 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
10309 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
10310 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
10312 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
10313 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
10314 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
10316 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
10317 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
10318 wy350-vb|wyse350-vb|wyse 350 visible bell,
10320 wy350-w|wyse350-w|wyse 350 132-column,
10321 cols#132, lw#7, nlab#16, wsl#97,
10322 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10324 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
10327 # This terminfo description is untested.
10328 # The wyse100 emulates an adm31, so the adm31 entry should work.
10332 cols#80, lines#24, xmc#1,
10333 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10334 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10335 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
10336 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
10337 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10338 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
10339 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
10341 # The Wyse 120/150 has most of the features of the Wyse 60.
10342 # This terminal does not need padding up to 9600 baud!
10343 # <msgr> should be set but the clear screen fails when in
10344 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10347 wy120|wyse120|wy150|wyse150|Wyse 120/150,
10348 am, bw, hs, km, mc5i, mir, msgr, xon,
10349 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10350 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10351 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10352 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10353 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10354 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10355 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
10356 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10357 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10359 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10360 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10361 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10362 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10363 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10364 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10365 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10366 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10367 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10368 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10369 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10370 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
10371 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10372 rs3=\EwG\Ee($<100>,
10373 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10374 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10375 %{64}%|%;%?%p7%t%{1}%|%;%c,
10376 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10377 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10378 tbc=\E0, tsl=\EF, use=adm+sgr,
10380 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
10381 cols#132, lw#7, nlab#16, wsl#97,
10382 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10383 rs2=\E`;$<70>, use=wy120,
10385 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
10386 lh@, lines#25, lw@, nlab@,
10387 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
10389 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
10390 lh@, lines#25, lw@, nlab@,
10391 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
10393 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
10396 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
10399 # The Wyse 60 is like the Wyse 50 but with more padding.
10400 # The reset strings are slow and the pad times very depending
10401 # on other parameters such as font loading. I have tried
10402 # to follow the following outline:
10404 # <rs1> -> set personality
10405 # <rs2> -> set number of columns
10406 # <rs3> -> set number of lines
10407 # <is1> -> select the proper font
10408 # <is2> -> do the initialization
10409 # <is3> -> set up display memory (2 pages)
10411 # The Wyse 60's that have vt100 emulation are slower than the
10412 # older Wyse 60's. This change happened mid-1987.
10413 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
10415 # The meta key is only half right. This terminal will return the
10416 # high order bit set when you hit CTRL-function_key
10418 # It may be useful to assign two function keys with the
10419 # values \E=(\s look at old data in page 1
10420 # \E=W, look at bottom of page 1
10421 # where \s is a space ( ).
10424 # The Wyse 60 runs faster when the XON/XOFF
10425 # handshake is turned off.
10427 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
10428 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10429 wy60|wyse60|Wyse 60,
10430 am, bw, hs, km, mc5i, mir, msgr,
10431 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
10432 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10433 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
10434 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10435 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10436 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
10437 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
10438 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
10439 ip=$<3>, is1=\EcB0\EcC1,
10440 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10442 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10443 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10444 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10445 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10446 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10447 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10448 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10449 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10450 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10451 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10452 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
10453 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
10454 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
10455 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
10456 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10457 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10458 %{64}%|%;%?%p7%t%{1}%|%;%c,
10459 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10460 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10461 tbc=\E0, tsl=\EF, use=adm+sgr,
10463 wy60-w|wyse60-w|wyse 60 132-column,
10464 cols#132, lw#7, nlab#16, wsl#97,
10465 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
10466 rs2=\EeF$<150>\E`;$<150>, use=wy60,
10468 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
10469 lh@, lines#25, lw@, nlab@,
10470 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
10471 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
10472 lh@, lines#25, lw@, nlab@,
10473 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
10475 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
10477 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
10478 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
10479 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
10480 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
10481 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
10482 cols#132, lw#7, nlab#16, wsl#97,
10483 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10484 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
10485 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
10487 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
10488 lh@, lines#43, lw@, nlab@,
10489 pln@, rs3=\Ee+$<150>, use=wy60-42,
10490 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
10491 lh@, lines#43, lw@, nlab@,
10492 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
10494 wy60-vb|wyse60-vb|Wyse 60 visible bell,
10496 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
10499 # The Wyse-99GT looks at lot like the Wyse 60 except that it
10500 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
10501 # setup parameter controls the number of lines on the screen.
10502 # For the Wyse 99GT the "lines" setup parameter controls the
10503 # number of lines in a page. The screen can display 25 lines max.
10504 # The Wyse-99GT also has personalities for the VT220 and
10505 # Tektronix 4014. But this has no bearing on the native mode.
10507 # (msgr) should be set but the clear screen fails when in
10508 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10509 # then set msgr, else use msgr@.
10511 # u0 -> enter Tektronix mode
10512 # u1 -> exit Tektronix mode
10514 wy99gt|wyse99gt|Wyse 99gt,
10516 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
10517 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
10518 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
10519 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
10520 u0=\E~>\E8, u1=\E[42h, use=wy60,
10522 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
10523 cols#132, lw#7, nlab#16, wsl#97,
10524 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10525 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
10528 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
10529 lh@, lines#25, lw@, nlab@,
10530 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
10532 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
10533 lh@, lines#25, lw@, nlab@,
10534 pln@, rs2=\E`;$<150>, use=wy99gt-w,
10536 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
10539 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
10540 bel@, use=wy99gt-w,
10542 # Can't set tabs! Other bugs (ANSI mode only):
10543 # - can't redefine function keys (anyway, key redefinition in ANSI mode
10544 # is too much complex to be described);
10545 # - meta key can't be described (the terminal forgets it when reset);
10546 # The xon-xoff handshaking can't be disabled while in ansi personality, so
10547 # emacs can't work at speed greater than 9600 baud. No padding is needed at
10549 # dch1 has been commented out because it causes annoying glittering when
10550 # vi deletes one character at the beginning of a line with tabs in it.
10551 # dch makes sysgen(1M) have a horrible behaviour when deleting
10552 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
10553 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
10554 # not, so smir and rmir are commented out as well.
10555 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10556 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
10557 am, km, mc5i, mir, msgr, xenl,
10558 cols#80, it#8, lines#25, vt#3,
10559 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
10560 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10561 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
10562 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
10563 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
10564 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
10565 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
10566 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
10567 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
10568 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
10569 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
10570 il1=\E[L, ind=\n$<1>, invis=\E[8m,
10571 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
10572 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
10573 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10574 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
10575 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
10576 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
10577 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
10578 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
10579 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
10580 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10581 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
10582 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
10583 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
10586 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
10587 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
10588 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
10589 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
10591 # This is the american terminal. Here tabs work fine.
10592 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10593 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
10594 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
10596 # This terminal (firmware version 02) has a lot of bugs:
10597 # - can't set tabs;
10598 # - other bugs in ANSI modes (see above).
10599 # This description disables handshaking when using cup. This is because
10600 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
10601 # cannot be used at speeds greater than 9600 baud, because at greater
10602 # speeds handshaking is needed even for character sending. If you use
10603 # DTR handshaking, you can use even greater speeds.
10604 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10605 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
10606 am, bw, hs, km, mc5i, mir, msgr, xon,
10607 cols#80, it#8, lines#25, wsl#46,
10608 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
10609 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
10610 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
10611 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10612 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
10613 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
10614 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
10615 ind=^J, invis=\EG3,
10616 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
10617 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
10619 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
10620 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
10621 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
10622 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
10623 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
10624 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10625 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
10626 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
10627 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
10628 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
10629 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
10630 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
10631 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
10632 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
10634 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
10635 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
10637 # This is the american terminal. Here tabs work.
10638 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10639 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
10640 hts=\E1, tbc=\E0, use=wy99f,
10643 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
10644 # The reset strings are slow and the pad times very depending
10645 # on other parameters such as font loading. I have tried
10646 # to follow the following outline:
10648 # <rs1> -> set personality
10649 # <rs2> -> set number of columns
10650 # <rs3> -> set number of lines
10651 # <is1> -> select the proper font
10652 # <is2> -> do the initialization
10653 # <is3> -> set up display memory (2 pages)
10655 # The display memory may be used for either text or graphics.
10656 # When "Display Memory = Shared" the terminal will have more pages
10657 # but garbage may be left on the screen when you switch from
10658 # graphics to text. If "Display Memory = Unshared" then the
10659 # text area will be only one page long.
10661 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
10662 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10663 wy160|wyse160|Wyse 160,
10664 am, bw, hs, km, mc5i, mir, msgr,
10665 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
10666 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10667 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
10668 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10669 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
10670 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
10671 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
10672 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
10673 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10675 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10676 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10677 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10678 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10679 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10680 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10681 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10682 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
10683 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10684 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10685 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
10686 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
10687 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
10688 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
10689 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10690 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10691 %{64}%|%;%?%p7%t%{1}%|%;%c,
10692 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10693 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10694 tbc=\E0, tsl=\EF, use=adm+sgr,
10696 wy160-w|wyse160-w|wyse 160 132-column,
10697 cols#132, lw#7, nlab#16, wsl#90,
10698 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
10699 rs2=\EeF$<150>\E`;$<150>, use=wy160,
10701 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10702 lh@, lines#25, lw@, nlab@,
10703 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10704 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10705 lh@, lines#25, lw@, nlab@,
10706 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10708 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10710 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10711 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10712 rs3=\Ee*$<150>, use=wy160,
10713 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10714 cols#132, lw#7, nlab#16, wsl#90,
10715 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10716 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10718 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10719 lh@, lines#43, lw@, nlab@,
10720 pln@, rs3=\Ee+$<150>, use=wy160-42,
10721 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10722 lh@, lines#43, lw@, nlab@,
10723 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10725 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10727 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10730 # The Wyse 75 is a vt100 lookalike without advanced video.
10732 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10733 # Underline) without magic cookies. The following description
10734 # uses this capability, but when more than one attribute is
10735 # put on the screen at once, all attributes will be changed
10736 # to be the same as the last attribute given.
10737 # The Wyse 75 can support more attributes when used with magic
10738 # cookies. The wy75-mc terminal description uses magic cookies
10739 # to correctly handle multiple attributes on a screen.
10741 wy75|wyse75|wyse 75,
10742 am, hs, mc5i, mir, msgr, xenl, xon,
10743 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10744 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10745 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10746 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
10747 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10748 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10749 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10750 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10751 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10752 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10753 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
10754 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10755 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10756 ind=\n$<2>, ip=$<1>,
10757 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10758 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10759 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10760 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10761 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10762 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10763 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10764 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10765 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10766 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10767 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10768 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10769 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10771 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
10772 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
10774 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10775 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10776 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10778 # This terminal description uses the non-hidden attribute mode
10779 # (with magic cookie).
10781 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10784 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10785 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10786 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
10787 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
10789 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10791 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10794 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10796 rs2=\E[35h\E[?3h$<80>, use=wy75,
10797 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10801 # Wyse 85 emulating a vt220 7 bit mode.
10802 # 24 line screen with status line.
10804 # The vt220 mode permits more function keys but it wipes out
10805 # the escape key. I strongly recommend that <f11> be set to
10807 # The terminal may have to be set for 8 data bits and 2 stop
10808 # bits for the arrow keys to work.
10809 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10810 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10811 # <dch> leave trash on the screen when used without XON/XOFF.
10813 wy85|wyse85|wyse 85,
10814 am, hs, mc5i, mir, msgr, xenl, xon,
10815 cols#80, it#8, lines#24, wsl#80,
10816 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10817 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10818 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10819 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10820 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10821 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10822 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10823 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10824 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10825 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10826 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10827 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10828 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10829 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10830 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10831 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10832 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10833 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10834 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10835 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10836 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10837 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10838 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10839 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10840 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10841 rs3=\E[?5l, sc=\E7,
10842 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10843 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10844 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10845 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10846 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10848 # Wyse 85 with visual bell.
10849 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10850 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
10852 # Wyse 85 in 132-column mode.
10853 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10855 rs2=\E[35h$<70/>\E[?3h, use=wy85,
10857 # Wyse 85 in 132-column mode with visual bell.
10858 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10861 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10862 # This copes with an apparent firmware bug in the wy85. He writes:
10863 # "What I did was change leave the terminal cursor keys set to Normal
10864 # (instead of application), and change \E[ to \233 for all the keys in
10865 # terminfo. At one point, I found some reference indicating that this
10866 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10867 # me), but I can't find that and the server under my bookmark to "Wyse
10868 # Technical" isn't responding. So there's the question of wether the wy85
10869 # terminfo should reflect the manufactuer's intended behaviour of the terminal
10871 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10872 am, hs, mc5i, mir, msgr, xenl, xon,
10873 cols#80, it#8, lines#24, wsl#80,
10874 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10875 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10876 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10877 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10878 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10879 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10880 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10881 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10882 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10883 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10884 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10885 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10886 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10887 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10888 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10889 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10890 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10891 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10892 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10893 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10894 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10895 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10896 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10897 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10898 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10899 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10900 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10901 rs3=\E[?5l, sc=\E7,
10902 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10903 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10904 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10905 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10906 tsl=\E[40h\E7\E[25;%i%p1%dH,
10908 # Wyse 185 emulating a vt320 7 bit mode.
10910 # This terminal always displays 25 lines. These lines may be used
10911 # as 24 data lines and a terminal status line (top or bottom) or
10912 # 25 data lines. The 48 and 50 line modes change the page size
10913 # and not the number of lines on the screen.
10915 # The Compose Character key can be used as a meta key if changed
10918 wy185|wyse185|wyse 185,
10919 am, hs, km, mc5i, mir, msgr, xenl, xon,
10920 cols#80, it#8, lines#24, wsl#80,
10921 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10922 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10923 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10924 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10925 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10926 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10927 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10928 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10929 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10930 el=\E[K, el1=\E[1K, enacs=\E)0,
10931 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
10932 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10933 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10934 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10935 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10936 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10937 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10938 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10939 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10940 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10941 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10942 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10943 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10944 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10945 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10946 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10947 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10948 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10949 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10950 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10951 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10952 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10953 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10956 # Wyse 185 with 24 data lines and top status (terminal status)
10957 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10959 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10962 # Wyse 185 with visual bell.
10963 wy185-vb|wyse185-vb|wyse 185+flash,
10966 # Wyse 185 in 132-column mode.
10967 wy185-w|wyse185-w|wyse 185 in 132-column mode,
10969 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10970 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
10972 # Wyse 185 in 132-column mode with visual bell.
10973 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
10976 # wy325 terminfo entries
10977 # Done by Joe H. Davis 3-9-92
10979 # lines 25 columns 80
10981 wy325|wyse325|Wyse epc,
10982 am, bw, hs, mc5i, mir,
10983 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10984 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10985 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10986 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10987 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10988 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10989 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
10990 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10991 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
10993 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10994 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10995 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10996 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10997 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10998 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
10999 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11000 mc0=\EP, mc4=^T, mc5=\Ed#,
11001 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11002 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11003 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11004 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11005 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11006 rs3=\EwG\Ee($<100>,
11007 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11008 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11009 %{64}%|%;%?%p7%t%{1}%|%;%c,
11010 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11011 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11012 tsl=\EF, use=adm+sgr,
11015 # lines 24 columns 80 vb
11017 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11021 # lines 24 columns 132
11023 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11024 cols#132, lw#7, nlab#16, wsl#97,
11025 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11026 rs2=\E`;$<70>, use=wy325,
11028 # lines 25 columns 80
11030 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11031 lh@, lines#25, lw@, nlab@,
11032 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11034 # lines 25 columns 132
11036 wy325-25w|wyse325-25w|wy325 132 columns,
11037 lh@, lines#25, lw@, nlab@,
11038 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11040 # lines 25 columns 132 vb
11042 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11046 # lines 42 columns 80
11048 wy325-42|wyse325-42|wyse-325 42 lines,
11049 lh@, lines#42, lw@, nlab@,
11050 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11052 # lines 42 columns 132
11054 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11055 lh@, lines#42, lw@, nlab@,
11056 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11058 # lines 42 columns 132 vb
11060 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11063 # lines 43 columns 80
11065 wy325-43|wyse325-43|wyse-325 43 lines,
11066 lh@, lines#43, lw@, nlab@,
11069 # lines 43 columns 132
11071 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11072 lh@, lines#43, lw@, nlab@,
11073 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11075 # lines 43 columns 132 vb
11077 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11080 # Wyse 370 -- 24 line screen with status line.
11082 # The terminal may have to be set for 8 data bits and 2 stop
11083 # bits for the arrow keys to work.
11085 # If you change keyboards the terminal will send different
11086 # escape sequences.
11087 # The following definition is for the basic terminal without
11090 # <u0> -> enter Tektronix 4010/4014 mode
11091 # <u1> -> exit Tektronix 4010/4014 mode
11092 # <u2> -> enter ASCII mode (from any ANSI mode)
11093 # <u3> -> exit ASCII mode (goto native ANSI mode)
11094 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11095 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11097 # Bug: The <op> capability resets attributes.
11098 wy370-nk|wyse 370 without function keys,
11099 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11100 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11101 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11102 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11103 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
11104 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11105 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11106 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11107 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11108 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11109 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11110 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11111 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11112 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11113 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11115 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11116 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11117 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11118 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11120 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11121 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11122 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11124 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11125 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11126 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11127 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11128 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11129 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11130 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11131 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11132 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11133 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11134 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11135 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11136 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11137 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11139 # Function key set for the ASCII (wy-50 compatible) keyboard
11140 # This is the default 370.
11142 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11143 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11144 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11145 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11146 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11147 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11148 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11149 knp=\E[U, kpp=\E[V, use=wy370-nk,
11151 # Function key set for the VT-320 (and wy85) compatible keyboard
11153 wy370-105k|Wyse 370 with 105 key keyboard,
11154 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11155 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11156 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11157 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11158 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11159 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11160 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11161 use=wy370-nk, use=vt220+keypad,
11163 # Function key set for the PC compatible keyboard
11165 wy370-EPC|Wyse 370 with 102 key keyboard,
11166 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11167 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11168 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11169 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11170 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11172 # Wyse 370 with visual bell.
11173 wy370-vb|Wyse 370 with visible bell,
11176 # Wyse 370 in 132-column mode.
11177 wy370-w|Wyse 370 in 132-column mode,
11179 rs2=\E[35h\E[?3h$<70>, use=wy370,
11181 # Wyse 370 in 132-column mode with visual bell.
11182 wy370-wvb|Wyse 370 with visible bell 132-columns,
11183 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11184 wy370-rv|Wyse 370 reverse video,
11185 rs3=\E[32h\E[?5h, use=wy370,
11187 # Wyse 99gt Tektronix 4010/4014 emulator,
11189 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11192 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
11193 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11194 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11195 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11196 %{31}%&%{64}%+%c\037,
11198 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11201 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11203 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
11205 # Wyse 160 Tektronix 4010/4014 emulator,
11207 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11208 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11209 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11210 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11211 %{31}%&%{64}%+%c\037,
11212 home=^]8`g @\037, use=wy99gt-tek,
11214 # Wyse 370 Tektronix 4010/4014 emulator,
11216 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11219 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
11220 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11221 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11222 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11224 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11227 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11229 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
11230 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11232 # Vendor-supplied Wyse entries end here.
11235 #TITLE: TERMINFO ENTRY WY520
11237 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11238 # BBS with the addition of more function keys and special keys.
11240 # rs1 -> set personality
11241 # rs2 -> set number of columns
11242 # rs3 -> set number of lines
11243 # is1 -> select the proper font
11244 # is2 -> do the initialization
11245 # is3 -> If this string is empty then rs3 gets sent.
11247 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11248 # - The BS key is programmed to generate BS in smcup since
11249 # is2 doesn't seem to work.
11250 # - Remove and shift/Remove: delete a character
11251 # - Insert : enter insert mode
11252 # - Find : delete to end of file
11253 # - Select : clear a line
11254 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11256 # - Bottom status line (host writable line) is used.
11257 # - smkx,rmkx are removed because this would put the numeric
11258 # keypad in Dec application mode which doesn't seem to work
11259 # with SCO applications.
11261 wy520|wyse520|wyse 520,
11262 am, hs, km, mc5i, mir, xenl, xon,
11263 cols#80, it#8, lines#24, wsl#80,
11264 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11265 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11266 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
11267 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11268 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11269 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11270 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
11271 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
11272 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
11273 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
11274 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
11275 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11276 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
11277 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11278 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
11279 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
11280 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
11281 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
11282 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
11283 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
11284 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
11285 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11286 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
11287 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
11288 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11289 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11290 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11291 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11292 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
11293 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11294 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
11295 vpa=\E[%i%p1%dd, use=vt220+keypad,
11297 # Wyse 520 with 24 data lines and status (terminal status)
11298 wy520-24|wyse520-24|wyse 520 with 24 data lines,
11300 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11303 # Wyse 520 with visual bell.
11304 wy520-vb|wyse520-vb|wyse 520 with visible bell,
11305 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
11307 # Wyse 520 in 132-column mode.
11308 wy520-w|wyse520-w|wyse 520 in 132-column mode,
11310 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11311 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
11313 # Wyse 520 in 132-column mode with visual bell.
11314 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
11315 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
11318 # Wyse 520 emulating a vt420 7 bit mode.
11319 # The DEL key is programmed to generate BS in is2.
11320 # With EPC keyboard.
11321 # - 'End' key will clear till end of line on EPC keyboard
11322 # - Shift/End : ignored.
11323 # - Insert : enter insert mode.
11324 # - Delete : delete a character (have to change interrupt character
11325 # to CTRL-C: stty intr '^c') for it to work since the
11326 # Delete key sends 7FH.
11327 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
11328 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
11329 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
11332 # Wyse 520 with 24 data lines and status (terminal status)
11333 # with EPC keyboard.
11334 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
11336 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11339 # Wyse 520 with visual bell.
11340 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
11341 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
11343 # Wyse 520 in 132-column mode.
11344 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
11346 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11347 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
11349 # Wyse 520 in 132-column mode with visual bell.
11350 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
11351 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
11353 # Wyse 520 in 80-column, 36 lines
11354 wy520-36|wyse520-36|wyse 520 with 36 data lines,
11357 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11360 # Wyse 520 in 80-column, 48 lines
11361 wy520-48|wyse520-48|wyse 520 with 48 data lines,
11364 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11367 # Wyse 520 in 132-column, 36 lines
11368 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
11371 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11374 # Wyse 520 in 132-column, 48 lines
11375 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
11378 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11382 # Wyse 520 in 80-column, 36 lines with EPC keyboard
11383 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
11386 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11389 # Wyse 520 in 80-column, 48 lines with EPC keyboard
11390 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
11393 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11396 # Wyse 520 in 132-column, 36 lines with EPC keyboard
11397 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
11400 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11403 # Wyse 520 in 132-column, 48 lines with EPC keyboard
11404 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
11407 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11410 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
11411 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
11412 # file and we don't know what <hts> is -- esr)
11413 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
11415 cols#80, it#8, lines#24,
11416 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
11417 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
11418 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
11419 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
11420 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
11421 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
11424 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
11425 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
11426 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11427 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
11430 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
11431 wy100q|Wyse 100 for Quotron,
11433 cols#80, lines#24, xmc#1,
11434 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
11435 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11436 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
11437 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
11438 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
11440 #### Kermit terminal emulations
11442 # Obsolete Kermit versions may be listed in the section describing obsolete
11443 # non-ANSI terminal emulators later in the file.
11446 # KERMIT standard all versions.
11447 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11448 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11449 # From: greg small <gts@populi.berkeley.edu> 9-25-84
11450 kermit|standard kermit,
11453 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11454 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11455 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
11456 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11457 kermit-am|standard kermit plus auto-margin,
11459 is2=K1 Standard Kermit plus Automatic Margins\n,
11461 # IBMPC Kermit 1.2.
11462 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
11463 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
11465 # From: greg small <gts@populi.berkeley.edu> 8-30-84
11466 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
11469 clear=\EH\EJ, ed@, el@,
11470 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
11471 # IBMPC Kermit 1.20
11472 # Cannot use line 25, now acts funny like ansi special scrolling region.
11473 # Initialization must escape from that region by cursor position to line 24.
11474 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
11475 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
11476 # From: greg small <gts@populi.berkeley.edu> 12-19-84
11477 pckermit120|UCB IBMPC Kermit 1.20,
11479 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
11481 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
11483 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
11484 # MS-DOS Kermit 2.27 for the IBMPC
11485 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11486 # Cannot use line 25, now acts funny like ansi special scrolling region.
11487 # Initialization must escape from that region by cursor position to line 24.
11488 # Does not use am: because autowrap is lost when kermit dropped and restarted.
11489 # Reverse video for standout like H19.
11490 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11491 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11492 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
11494 cols#80, it#8, lines#24,
11495 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11496 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11497 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
11498 home=\EH, ht=^I, il1=\EL,
11499 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
11500 \sIBMPC\s3-17-85\n,
11501 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
11502 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
11503 # MS-DOS Kermit 2.27 with automatic margins
11504 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11505 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
11507 cvvis=\EO\Eq\EG\EvK5,
11508 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
11509 \smargins\s3-17-85\n,
11511 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
11512 # Automatic margins now default. Use ansi <sgr> for highlights.
11513 # Define function keys.
11514 # (msk22714: removed obsolete ":kn#10:" -- esr)
11515 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11516 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
11518 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
11519 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
11520 \sIBM\sPC\s3-17-85\n,
11521 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
11522 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
11523 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
11524 # This was designed for a VT320 emulator, but it is probably a good start
11525 # at support for the VT320 itself.
11526 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
11527 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
11528 vt320-k3|MS-Kermit 3.00's vt320 emulation,
11529 am, eslok, hs, km, mir, msgr, xenl,
11530 cols#80, it#8, lines#49, pb#9600, vt#3,
11531 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11532 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11533 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
11534 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11535 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11536 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11537 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11538 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
11539 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
11541 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11542 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11543 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
11544 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
11545 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11546 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
11547 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
11548 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
11549 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
11550 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
11551 \E[4i\E[?4i\E[m\E[r\E[2$~,
11552 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
11553 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11554 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
11555 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
11556 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
11557 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
11558 vt320-k311|dec vt320 series as defined by kermit 3.11,
11559 am, eslok, hs, mir, msgr, xenl, xon,
11560 cols#80, it#8, lines#24, vt#3,
11561 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11562 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11563 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
11564 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11565 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11566 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11567 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11568 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
11569 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
11570 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
11572 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
11573 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11574 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11575 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
11576 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
11577 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
11578 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
11579 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
11580 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
11581 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
11583 ######## NON-ANSI TERMINAL EMULATIONS
11588 # These entries attempt to describe Avatar, a terminal emulation used with
11589 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
11590 # capabilities, but with cheaper (shorter) control sequences. Messy design,
11591 # excessively dependent on PC idiosyncracies, but apparently rather popular
11592 # in the BBS world.
11594 # No color support. Avatar doesn't fit either of the Tektronix or HP color
11595 # models that terminfo knows about. An Avatar color attribute is the
11596 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
11598 # I wrote these entries while looking at the Avatar spec. I don't have
11599 # the facilities to test them. Let me know if they work, or don't.
11601 # Avatar escapes not used by these entries (because maybe you're smarter
11602 # and more motivated than I am and can figure out how to wrap terminfo
11603 # around some of them, and because they are weird enough to be funny):
11605 # ^L -- clear window/reset current attribute to default
11606 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
11608 # bit: 6 5 4 3 2 1 0
11610 # +---+---+ | +---+---+
11612 # | | foreground color
11613 # | foreground intensity
11616 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
11617 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
11618 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
11619 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
11620 # (^V^L and ^V^M set the current attribute as a side-effect.)
11621 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
11622 # in the pattern, <c> the number of times the pattern
11623 # should be repeated. If either value is 0, no-op.
11624 # The pattern can contain Avatar console codes,
11625 # including other ^V ^Y patterns.
11627 # ^V^O -- clockwise mode on; turn print direction right each time you
11628 # hit a window edge (yes, really). Turned off by CR
11630 # ^V^Q%c -- query the driver
11631 # ^V^R -- driver reset
11632 # ^V^S -- Sound tone (PC-specific)
11633 # ^V^T -- change highlight at current cursor poition to %c
11634 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
11635 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
11638 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11639 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
11640 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
11641 # which is the only method that will actually work for multiple highlights.)
11643 # Update by TD - 2004: half of this was inconsistent. Found documentation
11644 # and repaired most of the damage. sgr0 is probably incorrect, but the
11645 # available documentation gives no clues for a workable string.
11646 avatar0|avatar terminal emulator level 0,
11648 cols#80, it#8, lines#25,
11649 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
11650 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
11651 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
11653 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
11654 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
11655 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
11656 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
11658 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11659 avatar0+|avatar terminal emulator level 0+,
11660 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
11661 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11662 avatar|avatar1|avatar terminal emulator level 1,
11663 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
11664 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
11668 # RBComm is a lean and mean terminal emulator written by the Interrupt List
11669 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
11670 # '90s), especially in the BBS world, and still has some loyal users due to
11671 # its very small memory footprint and to a cute macro language.
11672 rbcomm|IBM PC with RBcomm and EMACS keybindings,
11673 am, bw, mir, msgr, xenl,
11674 cols#80, it#8, lines#25,
11675 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11676 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11677 cub1=^H, cud1=^C, cuf1=^B,
11678 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
11679 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
11680 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
11681 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
11682 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
11683 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
11684 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
11685 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
11686 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
11687 rbcomm-nam|IBM PC with RBcomm without autowrap,
11689 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
11690 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
11691 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
11692 rbcomm-w|IBM PC with RBcomm in 132 column mode,
11694 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
11695 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
11696 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
11698 ######## LCD DISPLAYS
11701 #### Matrix Orbital
11702 # from: Eric Z. Ayers (eric@ale.org)
11704 # Matrix Orbital 20x4 LCD display
11705 # Command Character is 0xFE (decimal 254, octal 376)
11707 # On this device, cursor addressability isn't possible. The LCD expects:
11708 # 0xfe G <col> <row>
11709 # for cup: %p1 == row and %p2 is column
11712 # cup=\376G%p2%c%p1%c
11713 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
11714 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
11716 # Alas, there is no cursor upline capability on this display.
11718 # These entries add some 'sanity stuff' to the clear function. That is, it
11719 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
11720 # and turns off the cursor blinking and stuff like that.
11722 # NOTE: calling 'beep' turns on the backlight (bell)
11723 # NOTE: calling 'flash' turns it on and back off (visual bell)
11725 MtxOrb|Generic Matrix Orbital LCD display,
11726 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
11727 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
11728 flash=\376B\001$<200>\376F, home=\376H,
11729 MtxOrb204|20x4 Matrix Orbital LCD display,
11730 cols#20, lines#4, use=MtxOrb,
11731 MtxOrb162|16x2 Matrix Orbital LCD display,
11732 cols#16, lines#2, use=MtxOrb,
11735 ######## OLDER TERMINAL TYPES
11737 # This section is devoted to older commercial terminal brands that are now
11738 # discontinued, but known to be still in use or represented by emulations.
11741 #### AT&T (att, tty)
11743 # This section also includes Teletype-branded VDTs.
11745 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11746 # Boundless Technologies); for details, see the header comment on the ADDS
11749 # These are AT&T's official terminfo entries. All-caps aliases have been
11752 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11753 am, eo, mir, msgr, xon,
11754 cols#80, it#8, lines#24,
11755 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
11756 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11757 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11758 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11759 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11760 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11761 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11762 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11763 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11764 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11765 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11766 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11767 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11769 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11770 mc0@, mc4@, mc5@, use=att2300,
11772 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11773 # Seems upward compatible with vt100, plus ins/del line/char.
11774 # On sgr, the protection parameter is ignored.
11775 # No check is made to make sure that only 3 parameters are output.
11776 # standout= reverse + half-intensity = 3 | 5.
11777 # bold= reverse + underline = 2 | 3.
11778 # note that half-bright blinking doesn't look different from normal blinking.
11779 # NOTE:you must program the function keys first, label second!
11780 # (att4410: a BSD entry has been seen with the following capabilities:
11781 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11782 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11783 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11784 am, hs, mir, msgr, xon,
11785 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11786 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
11788 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
11789 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11790 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11791 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11792 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
11793 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
11794 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
11795 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
11796 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
11797 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
11798 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
11800 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11801 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11802 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11803 ll=\E[24H, nel=^M^J,
11804 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
11806 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11807 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11809 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11810 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11811 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11812 tsl=\E7\E[25;%p1%{1}%+%dH,
11814 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11816 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11818 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11820 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11823 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11825 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11827 # 5410 in terms of a vt100
11828 # (v5410: added <rmam>/<smam> based on init string -- esr)
11829 v5410|att5410 in terms of a vt100,
11830 am, mir, msgr, xon,
11831 cols#80, it#8, lines#24, vt#3,
11832 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11833 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11834 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11835 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
11836 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11837 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11838 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11839 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11840 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11841 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11842 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11844 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
11845 %;m%?%p9%t\016%e\017%;$<2>,
11846 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11847 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11851 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11852 # even! the 5420 has three modes: scroll, window or page mode
11853 # this terminfo should work in scroll or window mode, but doesn't
11854 # take advantage of any of the differences between them.
11856 # Has memory below (2 lines!)
11857 # 3 pages of memory (plus some spare)
11858 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11859 # <hpa>, <hts> would work for these, but these work in both scroll and window
11860 # mode... Unset insert character so insert mode works
11861 # <is1> sets 80 column mode,
11862 # <is2> escape sequence:
11863 # 1) turn off all fonts
11864 # 2) function keys off, keyboard lock off, control display off,
11865 # insert mode off, erasure mode off,
11866 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11867 # 4) reset origin mode
11868 # 5) set line wraparound
11869 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11871 # 8) program ENTER to transmit ^J,
11872 # We use \212 to program the ^J because a bare ^J will get translated by
11873 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11875 # <is3> set screen color to black,
11876 # No representation in terminfo for the delete word key: kdw1=\Ed
11877 # Key capabilities assume the power-up send sequence...
11878 # This <rmcup> is not strictly necessary, but it helps maximize
11879 # memory usefulness: <rmcup=\Ez>,
11880 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11881 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11882 # smkx programs the SYS PF keys to send a set sequence.
11883 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11884 # This string causes them to send the strings <kf1>-<kf8>
11885 # when pressed in SYS PF mode.
11886 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11887 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11888 OTbs, db, mir, xon,
11889 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11890 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11891 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11892 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11893 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11894 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11895 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11896 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11897 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
11898 \E[4i\Ex\E[21;1j\212,
11899 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11900 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11901 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11902 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11903 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11904 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11905 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11906 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11907 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11908 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11909 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11910 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11911 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11912 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11913 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11914 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11917 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11918 cols#132, lm#54, wsl#97,
11919 is1=\E[?3h$<100>, use=att4415,
11921 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11922 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11924 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11925 cols#132, lm#54, wsl#97,
11926 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11929 # Note that this mode permits programming USER PF KEYS and labels
11930 # However, when you program user pf labels you have to reselect
11931 # user pf keys to make them appear!
11932 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11933 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11934 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
11936 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11938 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11939 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11942 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11943 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11946 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11947 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11950 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11951 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11954 att5420_2|AT&T 5420 model 2 80 cols,
11955 am, db, hs, mir, msgr, xon,
11956 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11957 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11958 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11959 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11960 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11961 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11962 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11963 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11964 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11965 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
11966 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11967 indn=\E[%p1%dE, invis=\E[8m,
11968 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
11969 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
11971 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
11972 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
11973 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
11974 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
11975 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11976 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11977 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
11978 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
11979 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
11981 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
11982 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
11983 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11985 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
11986 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11987 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
11988 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11989 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11990 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
11992 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
11993 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
11997 att4418|att5418|AT&T 5418 80 cols,
12000 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12001 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
12002 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12003 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12004 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12005 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12006 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
12007 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12008 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12009 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12010 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12011 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12012 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12013 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12014 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12015 att4418-w|att5418-w|AT&T 5418 132 cols,
12017 is1=\E[?3h, use=att5418,
12019 att4420|tty4420|teletype 4420,
12020 OTbs, da, db, eo, msgr, ul, xon,
12021 cols#80, lines#24, lm#72,
12022 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12023 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12024 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12025 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12026 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12027 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12028 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12029 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12031 # The following is a terminfo entry for the Teletype 4424
12032 # asynchronous keyboard-display terminal. It supports
12033 # the vi editor. The terminal must be set up as follows,
12035 # HIGHLIGHT DEFINITION 3-TONE
12036 # DISPLAY FUNCTION GROUP III
12038 # The second entry below provides limited (a la adm3a)
12039 # operation under GROUP II.
12041 # This must be used with DISPLAY FUNCTION GROUP I or III
12042 # and HIGHLIGHT DEFINITION 3-TONE
12043 # The terminal has either bold or blink, depending on options
12045 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12046 att4424|tty4424|teletype 4424,
12049 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12050 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
12051 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12052 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12053 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12054 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12055 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12056 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
12057 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12058 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12059 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12061 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|
12062 %t;5%;%?%p5%t;0%;m,
12063 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12066 att4424-1|tty4424-1|teletype 4424 in display function group I,
12067 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12070 # This entry is not one of AT&T's official ones, it was translated from the
12071 # 4.4BSD termcap file. The highlight strings are different from att4424.
12072 # I have no idea why this is -- older firmware version, maybe?
12073 # The following two lines are the comment originally attached to the entry:
12074 # This entry appears to avoid the top line - I have no idea why.
12075 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12076 att4424m|tty4424m|teletype 4424M,
12078 cols#80, it#8, lines#23,
12079 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
12080 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12081 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
12082 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12083 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12084 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
12085 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12087 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12088 # is quite similar, except for some minor differences. No page
12089 # mode, for example, so all of the <cup> sequences used above have
12090 # to change back to what's being used for the 5410. Many of the
12091 # option settings have changed their numbering as well.
12093 # This has been tested on a preliminary model.
12095 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12096 att5425|tty5425|att4425|AT&T 4425/5425,
12097 am, da, db, hs, mir, msgr, xenl, xon,
12098 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12099 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12100 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12101 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
12102 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12103 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12104 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12105 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12106 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12107 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12108 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12109 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12110 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
12111 invis=\E[8m, is1=\E<\E[?3l$<100>,
12112 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12113 \E[4i\Ex\E[25;1j\212,
12114 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12115 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12116 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12117 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12118 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12119 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12121 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12122 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12123 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12124 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12125 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12126 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12127 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12128 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12129 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12130 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12131 vpa=\E[%p1%{1}%+%dd,
12133 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12134 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12136 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12137 cols#132, lm#54, wsl#97,
12138 is1=\E[?3h$<100>, use=tty5425,
12140 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12141 # I also added <rmam>/<smam> -- esr)
12142 att4426|tty4426|teletype 4426S,
12144 cols#80, lines#24, lm#48,
12145 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12146 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12147 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12148 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12149 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12150 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12151 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12152 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
12153 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12154 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12155 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12156 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12157 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12158 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12159 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12160 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12163 # Terminfo entry for the AT&T 510 A Personal Terminal
12164 # Function keys 9 - 16 are available only after the
12165 # screen labeled (soft keys/action blocks) are labeled. Function key
12166 # 9 corresponds to the leftmost touch target on the screen,
12167 # function key 16 corresponds to the rightmost.
12169 # This entry is based on one done by Ernie Rice at Summit, NJ and
12170 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12171 att510a|bct510a|AT&T 510A Personal Terminal,
12172 am, mir, msgr, xenl, xon,
12173 cols#80, lh#2, lines#24, lw#7, nlab#8,
12174 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12175 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12176 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
12177 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12178 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12179 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12180 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12181 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12182 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
12183 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12184 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12185 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12186 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12187 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12188 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12189 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12190 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12191 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12192 %|%t;7%;m%?%p9%t\016%e\017%;,
12193 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12194 smul=\E[4m, tbc=\E[3g,
12196 # Terminfo entry for the AT&T 510 D Personal Terminal
12197 # Function keys 9 through 16 are accessed by bringing up the
12199 # Function key 9 corresponds to the leftmost touch target on the screen,
12200 # function key 16 corresponds to the rightmost.
12202 # There are problems with soft key labeling. These are due to
12203 # strangenesses in the native terminal that are impossible to
12204 # describe in a terminfo.
12205 att510d|bct510d|AT&T 510D Personal Terminal,
12206 am, da, db, mir, msgr, xenl, xon,
12207 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12208 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12209 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12210 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
12211 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12212 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12213 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12214 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12215 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12216 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12217 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12218 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12219 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12220 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12221 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12222 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12223 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12224 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12225 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12226 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12227 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12228 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12229 rs2=\E[5;0|, sc=\E7,
12230 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12231 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12232 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12233 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12234 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12236 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12237 att500|att513|AT&T 513 using page mode,
12238 am, chts, mir, msgr, xenl, xon,
12239 cols#80, lh#2, lines#24, lw#8, nlab#8,
12240 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12241 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12242 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
12243 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12244 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12245 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12246 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12247 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12248 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12249 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
12250 indn=\E[%p1%dE, invis=\E[8m,
12251 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12252 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12253 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12254 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12255 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12256 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12257 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12258 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12259 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12260 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
12261 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12262 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
12263 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
12264 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12265 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12266 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
12267 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
12268 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
12270 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12272 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12274 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
12275 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12276 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12277 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
12278 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
12280 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
12281 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
12282 rs2=\E[5;0|, sc=\E7,
12283 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12284 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12285 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
12286 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
12287 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12290 # printer must be set to EMUL ANSI to accept ESC codes
12291 # <cuu1> stops at top margin
12292 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
12293 # and alt font ascii,wrap on,tabs cleared
12294 # <is2> disables newline on LF,Emphasized off
12295 # The <u0> capability sets form length
12296 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
12298 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
12299 orhi#100, orl#12, orvi#72,
12300 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
12301 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
12302 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
12305 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
12306 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
12307 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
12308 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
12309 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
12310 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
12312 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
12313 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
12314 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
12315 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
12317 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
12318 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
12319 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
12320 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
12321 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
12323 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
12324 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
12325 u0=\E[%p1%dt, vpa=\E[%p1%dd,
12327 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
12328 # The following SET-UP modes are assumed for normal operation:
12329 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
12330 # Other SET-UP modes may be set for operator convenience or communication
12331 # requirements. This termcap description is for the Resident Terminal Mode.
12332 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12333 # The BRL entry also said: UNSAFE :ll=\E[70H:
12334 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
12336 cols#88, it#8, lines#70, vt#3,
12337 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
12338 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12339 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12340 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
12341 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
12342 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12343 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
12346 # 5620 terminfo (2.0 or later ROMS with char attributes)
12347 # The following SET-UP modes are assumed for normal operation:
12348 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
12349 # Other SET-UP modes may be set for operator convenience or communication
12350 # requirements. This termcap description is for Resident Terminal Mode. No
12351 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12352 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
12353 # Be aware that older versions of the dmd have a firmware bug that affects
12354 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
12355 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
12356 # also has <ll>=\E[70H commented out and marked unsafe.
12357 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
12358 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
12359 OTbs, am, msgr, npc, xon,
12360 cols#88, it#8, lines#70,
12361 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
12362 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12363 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
12364 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12365 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
12366 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12367 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
12368 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
12369 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
12370 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
12371 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
12372 lines#24, use=att5620,
12373 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
12374 lines#34, use=att5620,
12375 # 5620 layer running the "S" system's downloaded graphics handler:
12376 att5620-s|tty5620-s|layer|vitty|5620 S layer,
12378 cols#80, it#8, lines#72,
12379 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
12380 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
12381 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
12382 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12385 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
12387 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12388 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
12389 att605|AT&T 605 80 column 102key keyboard,
12391 cols#80, lines#24, lw#8, nlab#8, wsl#80,
12392 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12393 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
12394 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12395 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12396 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12397 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12398 il1=\E[L, ind=^J, invis=\E[8m,
12399 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
12400 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
12401 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12402 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
12403 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
12404 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
12405 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
12406 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
12407 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
12408 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
12409 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
12410 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
12411 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
12412 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
12413 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12414 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12415 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12416 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12417 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
12418 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12419 tsl=\E7\E[25;%i%p1%dx,
12420 att605-pc|ATT 605 in pc term mode,
12421 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
12423 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
12424 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
12425 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12426 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
12427 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
12428 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
12429 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
12430 xoffc=g, xonc=e, use=att605,
12431 att605-w|AT&T 605-w 132 column 102 key keyboard,
12433 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
12434 # (att610: I added <rmam>/<smam> based on the init string. I also
12435 # added <indn> and <rin> because the BSD file says the att615s have them,
12436 # and the 615 is like a 610 with a big keyboard, and most of their other
12437 # smart terminals support the same sequence -- esr)
12438 att610|AT&T 610; 80 column; 98key keyboard,
12439 am, eslok, hs, mir, msgr, xenl, xon,
12440 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12441 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12442 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12443 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12444 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12445 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12446 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12447 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12448 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12449 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12450 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12451 indn=\E[%p1%dS, invis=\E[8m,
12452 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
12453 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12454 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12455 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12456 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12457 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12458 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
12460 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12461 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12462 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12463 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
12464 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12465 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12466 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12467 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
12468 att610-w|AT&T 610; 132 column; 98key keyboard,
12470 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12473 att610-103k|AT&T 610; 80 column; 103key keyboard,
12474 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12475 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12476 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12477 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12478 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12479 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12480 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
12481 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
12482 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
12483 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
12484 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
12485 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
12486 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
12487 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
12489 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12491 att615|AT&T 615; 80 column; 98key keyboard,
12492 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12493 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12494 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12495 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12496 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12497 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12498 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
12499 att615-w|AT&T 615; 132 column; 98key keyboard,
12500 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12501 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12502 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12503 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12504 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12505 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12506 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
12507 att615-103k|AT&T 615; 80 column; 103key keyboard,
12508 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
12509 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
12510 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
12511 # (att620: I added <rmam>/<smam> based on the init string and
12512 # <rin>/<indn> from a BSD termcap -- esr)
12513 att620|AT&T 620; 80 column; 98key keyboard,
12514 am, eslok, hs, mir, msgr, xenl, xon,
12515 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12516 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12517 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12518 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12520 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12522 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12523 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12524 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12525 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12526 indn=\E[%p1%dS, invis=\E[8m,
12527 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
12528 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
12529 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12530 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12531 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12532 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
12533 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
12534 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
12535 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
12536 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
12537 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
12538 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12539 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
12540 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12541 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12542 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12543 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
12544 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12545 rs2=\Ec\E[?3l, sc=\E7,
12546 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12547 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
12548 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
12549 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12550 tsl=\E7\E[25;%i%p1%dx,
12551 att620-w|AT&T 620; 132 column; 98key keyboard,
12553 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12555 att620-103k|AT&T 620; 80 column; 103key keyboard,
12556 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12557 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12558 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12559 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12560 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12561 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12562 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
12563 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
12564 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
12565 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
12566 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
12567 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
12568 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12569 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12570 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
12571 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
12573 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
12575 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12578 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
12579 # The following SETUP modes are assumed for normal operation:
12580 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
12581 # Font_Size=Large Non-Layers_Window_Cols=80
12582 # Non-Layers_Window_Rows=60
12583 # Other SETUP modes may be set for operator convenience or communication
12584 # requirements. Some capabilities assume a printer attached to the Aux EIA
12585 # port. This termcap description is for the Fixed Non-Layers Window. No
12586 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12587 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
12588 att630|AT&T 630 windowing terminal,
12589 OTbs, am, da, db, mir, msgr, npc, xon,
12590 cols#80, it#8, lines#60, lm#0,
12591 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
12592 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12593 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12594 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12595 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12596 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12597 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
12598 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12599 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
12600 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
12601 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
12602 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
12603 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
12604 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
12605 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
12606 rmul=\E[m, rs2=\Ec, sc=\E7,
12607 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
12609 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12610 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
12611 lines#24, use=att630,
12613 # This is the att700 entry for 700 native emulation of the AT&T 700
12614 # terminal. Comments are relative to changes from the 605V2 entry and
12615 # att730 on which the entry is based. Comments show the terminfo
12616 # capability name, termcap name, and description.
12618 # Here is what's going onm in the init string:
12619 # ESC [ 50;4| set 700 native mode (really is 605)
12620 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
12621 # ESC [ 53;0| set GenFlow to Xon/Xoff
12622 # ESC [ 8 ;0| set CR on NL
12623 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
12624 # ESC [ ? 4 l jump scroll
12625 # ESC [ ? 5 l/h video: normal (l); reverse (h)
12626 # ESC [ ?13 l Labels on
12627 # ESC [ ?15 l parity check = no
12628 # ESC [ 13 l monitor mode off
12629 # ESC [ 20 l LF on NL (not CRLF on NL)
12630 # ESC [ ? 7 h autowrap on
12631 # ESC [ 12 h local echo off
12632 # ESC ( B GO = ASCII
12633 # ESC ) 0 G1 = Special Char & Line Drawing
12634 # ESC [ ? 31 l Set 7 bit controls
12636 # Note: Most terminals, especially the 600 family use Reverse Video for
12637 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
12638 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
12639 # standout mode with \E[m (all normal attributes). The 730 entry simply
12640 # exits reverse video which would leave other current attributes intact. It
12641 # was assumed the 730 entry to be more correct so rmso has changed. The
12642 # 605V2 has no sequences to turn individual attributes off, thus its setting
12643 # and the rmso/smso settings from the 730.
12645 # Note: For the same reason as above in rmso I changed exit under-score mode
12646 # to specifically turn off underscore, rather than return to all normal
12649 # Note: The following pkey_xmit is taken from the 605V2 which contained the
12650 # capability as pfxl. It was changed here to pfx since pfxl
12651 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
12652 # allows strings to be parameters and label values must be programmed as
12653 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
12654 # and strings to be parameters. The 605V2 pfx entry should be examined later
12655 # in this regard. For reference the 730 pfxl entry is shown here for comparison
12657 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
12658 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12661 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12664 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12666 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
12670 # modular 10 pin Connector
12671 # Left side Right side
12672 # Pin 1 2 3 4 5 6 7 8 9 10
12674 # Key (notch) at bottom
12686 # The manual is 189 pages and is loaded with details about the escape codes,
12687 # etc..... Available from AT&T CIC 800-432-6600...
12688 # ask for Document number 999-300-660..
12690 att700|AT&T 700 24x80 column display w/102key keyboard,
12691 am, eslok, hs, mir, msgr, xenl, xon,
12692 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12693 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12694 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12695 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12696 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12697 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12698 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12699 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12700 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12701 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
12702 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12703 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
12704 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
12705 \E(B\E)0\E[?31l\E[0m\017,
12706 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
12707 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12708 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
12709 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
12710 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
12711 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
12712 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
12713 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
12714 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
12715 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12716 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
12717 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12718 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
12719 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12720 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
12721 \s\s\s\s\s\s%;%p2%s,
12722 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12723 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12724 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
12725 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
12726 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12727 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12728 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
12729 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
12730 tsl=\E7\E[99;%i%p1%dx,
12732 # This entry was modified 3/13/90 by JWE.
12733 # fixes include additions of <enacs>, correcting <rep>, and modification
12734 # of <kHOM>. (See comments below)
12735 # att730 has status line of 80 chars
12736 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
12737 # the <kf25> and up keys are used for shifted system Fkeys
12738 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
12739 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
12740 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
12741 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
12742 # 102, 102+1, or 122 key keyboards
12744 # (att730: I added <rmam>/<smam> based on the init string -- esr)
12745 att730|AT&T 730 windowing terminal,
12746 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
12747 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
12748 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12749 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12750 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12751 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12752 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12753 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12754 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12755 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12756 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12757 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
12758 ind=\ED, invis=\E[8m,
12759 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
12760 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12761 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12762 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12763 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
12764 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
12765 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
12766 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
12767 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
12768 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
12769 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
12770 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
12771 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12772 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
12773 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12774 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
12775 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12776 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
12777 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12778 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12779 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
12780 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
12781 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12782 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12783 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12784 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
12785 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
12786 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
12787 lines#41, use=att730,
12788 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
12789 lines#24, use=att730,
12790 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12791 flash=\E[?5l$<200>\E[?5h,
12792 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
12793 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12794 lines#41, use=att730r,
12795 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12796 lines#24, use=att730r,
12798 # The following represents the screen layout along with the associated
12799 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12800 # not appear on the screen but are shown to reference the bezel buttons.
12801 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12802 # position relative to the screen.
12806 # +----------------------------------------------------------------+
12808 # XXXX | kf0 kf24 | XXXX
12811 # XXXX | kf1 kf23 | XXXX
12814 # XXXX | kf2 kf22 | XXXX
12817 # XXXX | kf3 kf21 | XXXX
12820 # XXXX | kf4 kf20 | XXXX
12823 # XXXX | kf5 kf19 | XXXX
12826 # XXXX | kf6 kf18 | XXXX
12832 # +----------------------------------------------------------------+
12834 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12836 # Note: XXXX represents the screen buttons
12842 # The character string sent by key 'kf26' may be user programmable
12843 # to send either \E[16s, or \E[26s.
12844 # The character string sent by key 'krfr' may be user programmable
12845 # to send either \E[17s, or \E[27s.
12847 # Depression of the "CMD" key sends \E! (kcmd)
12848 # Depression of the "MAIL" key sends \E[26s (kf26)
12849 # "REDRAW" same as "REFRESH" (krfr)
12851 # "kf" functions adds carriage return to output string if terminal is in
12854 # The following are functions not covered in the table above:
12856 # Set keyboard character (SKC): \EPn1;Pn2w
12857 # Pn1= 0 Back Space key
12859 # Pn2= Program char (hex)
12861 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12862 # Pn1= Window number (1-39)
12863 # Pn2-Pn5= Y;X;Y;X coordinates
12865 # Screen Selection (SSL): \E[Pnu
12866 # Pn= Window number
12868 # Set Terminal Modes (SM): \E[Pnh
12869 # Pn= 3 Graphics mode
12870 # Pn= > Cursor blink
12871 # Pn= < Enter new line mode
12872 # Pn= = Enter reverse insert/replace mode
12873 # Pn= ? Enter no scroll mode
12875 # Reset Terminal Mode (RM): \E[Pnl
12876 # Pn= 3 Exit graphics mode
12877 # Pn= > Exit cursor blink
12878 # Pn= < Exit new line mode
12879 # Pn= = Exit reverse insert/replace mode
12880 # Pn= ? Exit no scroll mode
12882 # Screen Status Report (SSR): \E[Pnp
12883 # Pn= 0 Request current window number
12884 # Pn= 1 Request current window dimensions
12886 # Device Status Report (DSR): \E[6n Request cursor position
12888 # Call Status Report (CSR): \E[Pnv
12889 # Pn= 0 Call failed
12890 # Pn= 1 Call successful
12892 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12893 # Pn1= Button number to be loaded
12894 # Pn2= Character count of "string"
12895 # Pn3= Key mode being loaded:
12899 # String= Text string (15 chars max)
12901 # Screen Number Report (SNR): \E[Pnp
12902 # Pn= Screen number
12904 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12905 # Pn1= Number of rows available in window
12906 # Pn2= Number of columns available in window
12908 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12909 # Pn1= "Y" Position of cursor
12910 # Pn2= "X" Position of cursor
12912 # Request Answer Back (RAB): \E[c
12914 # Answer Back Response (ABR): \E[?;*;30;VSV
12915 # *= 0 No printer available
12916 # *= 2 Printer available
12917 # V= Software version number
12918 # SV= Software sub version number
12919 # (printer-available field not documented in v1)
12921 # Screen Alignment Aid: \En
12923 # Bell (lower pitch): \E[x
12925 # Dial Phone Number: \EPdstring\
12926 # string= Phone number to be dialed
12928 # Set Phone Labels: \EPpstring\
12929 # string= Label for phone buttons
12931 # Set Clock: \EPchour;minute;second\
12933 # Position Clock: \EPsY;X\
12934 # Y= "Y" coordinate
12935 # X= "X" coordinate
12937 # Delete Clock: \Epr\
12939 # Programming The Function Buttons: \EPfPn;string\
12940 # Pn= Button number (00-06, 18-24)
12941 # (kf00-kf06, kf18-kf24)
12942 # string= Text to sent on button depression
12944 # The following in version 2 only:
12946 # Request For Local Directory Data: \EPp12;\
12948 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12950 # Request for Local Directory Data in print format: \EPp13;\
12952 # Enable 'Prt on Line' mode: \022 (DC2)
12954 # Disable 'Prt on Line' mode: \024 (DC4)
12958 # The following Terminfo entry describes functions which are supported by
12959 # the AT&T 5430/pt505 terminal software version 2 and later.
12960 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12962 cols#80, it#8, lines#24,
12963 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12964 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12965 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
12966 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12967 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12968 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12969 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
12970 il=\E[%p1%dL, il1=\E[L, ind=^J,
12971 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
12972 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12973 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
12974 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
12975 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
12976 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
12977 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12978 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
12979 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
12980 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
12982 # The following Terminfo entry describes functions which are supported by
12983 # the AT&T 5430/pt505 terminal software version 1.
12984 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
12986 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
12987 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
12988 lines#22, use=att505,
12990 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
12991 # This cut mark helps make life less painful for people running ncurses tic
12992 # on machines with relatively little RAM. The file can be broken in half here
12993 # cleanly and compiled in sections -- no `use' references cross this cut
12997 #### Ampex (Dialogue)
12999 # Yes, these are the same people who are better-known for making audio- and
13000 # videotape. I'm told they are located in Redwood City, CA.
13003 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13004 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13005 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13007 cols#80, it#8, lines#24,
13008 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
13009 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13010 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13011 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
13012 smso=\Ej, smul=\El, tbc=\E3,
13013 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13014 ampex175|ampex d175,
13017 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13018 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13019 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
13020 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13021 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13022 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13023 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13024 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13025 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13026 # mode), this key can be used as the erase key; I find I like this. Because
13027 # some people and some systems may not, there is another termcap ("ampex175")
13028 # that suppresses this little eccentricity by omitting the relevant capability.
13029 ampex175-b|ampex d175 using left arrow for erase,
13030 kbs=^_, use=ampex175,
13031 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13032 # (ampex210: removed obsolete ":kn#10:" -- esr)
13033 ampex210|a210|ampex a210,
13034 OTbs, am, hs, xenl,
13035 cols#80, it#8, lines#24, xmc#1,
13036 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13037 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13038 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13039 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13040 if=/usr/share/tabset/std, il1=\EE, invis@,
13041 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13042 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13043 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13044 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13045 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13046 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13047 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13048 # and moved the padding to be *after* the caps -- esr)
13049 ampex219|ampex-219|amp219|Ampex with Automargins,
13051 cols#80, it#8, lines#24,
13052 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13053 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
13054 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13055 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13056 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13057 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
13058 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13059 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13060 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13061 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13062 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13063 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13064 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13065 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13066 cols#132, lines#24,
13067 bel=^G, cr=^M, cud1=^J, ind=^J,
13068 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13069 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13070 ampex232|ampex-232|Ampex Model 232,
13072 cols#80, lines#24, xmc#1,
13073 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13074 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13075 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13076 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13077 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13078 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13079 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13080 kf9=^AI\r, khome=^^, use=adm+sgr,
13081 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13082 ampex232w|Ampex Model 232 / 132 columns,
13083 cols#132, lines#24,
13084 is2=\E\034Eg\El, use=ampex232,
13086 #### Ann Arbor (aa)
13088 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13089 # numbers of function keys. At least some used monitors in portrait mode,
13090 # allowing up to 76-character screen heights! They were reachable at:
13092 # Ann Arbor Terminals
13093 # 6175 Jackson Road
13094 # Ann Arbor, MI 48103
13097 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13098 # can't be found on the Web; I fear they're long dead. R.I.P.
13102 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13103 # Highly modified 6/22 by Mike O'Brien.
13104 # split out into several for the various screen sizes by dave-yost@rand
13105 # Modifications made 3/82 by Mark Horton
13106 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13107 # status line moved to top of screen, <flash> removed 5/82
13108 # Some unknown person at SCO then hacked the init strings to make them more
13111 # assumes the following setup:
13112 # A menu: 0000 1010 0001 0000
13113 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13114 # C menu: 56 66 0 0 9600 0110 1100
13115 # D menu: 0110 1001 1 0
13117 # Briefly, the settings are for the following modes:
13118 # (values are for bit set/clear with * indicating our preference
13119 # and the value used to test these termcaps)
13120 # Note that many of these settings are irrelevent to the terminfo
13121 # and are just set to the default mode of the terminal as shipped
13124 # A menu: 0000 1010 0001 0000
13125 # Block/underline cursor*
13126 # blinking/nonblinking cursor*
13127 # key click/no key click*
13128 # bell/no bell at column 72*
13130 # key pad is cursor control*/key pad is numeric
13131 # return and line feed/return for <cr> key *
13132 # repeat after .5 sec*/no repeat
13133 # repeat at 25/15 chars per sec. *
13135 # hold data until pause pressed/process data unless pause pressed*
13136 # slow scroll/no slow scroll*
13137 # Hold in area/don't hold in area*
13138 # functions keys have default*/function keys disabled on powerup
13140 # show/don't show position of cursor during page transmit*
13145 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13146 # Baud rate (9600*)
13148 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13149 # 1 stop bit*/2 stop bits
13150 # parity error detection off*/on
13152 # keyboard local/on line*
13153 # half/full duplex*
13154 # disable/do not disable keyboard after data transmission*
13156 # transmit entire page/stop transmission at cursor*
13157 # transfer/do not transfer protected characters*
13158 # transmit all characters/transmit only selected characters*
13159 # transmit all selected areas/transmit only 1 selected area*
13161 # transmit/do not transmit line separators to host*
13162 # transmit/do not transmit page tab stops tabs to host*
13163 # transmit/do not transmit column tab stop tabs to host*
13164 # transmit/do not transmit graphics control (underline,inverse..)*
13166 # enable*/disable auto XON/XOFF control
13167 # require/do not require receipt of a DC1 from host after each LF*
13168 # pause key acts as a meta key/pause key is pause*
13176 # XON character (17*)
13177 # XOFF character (19*)
13179 # C menu: 56 66 0 0 9600 0110 1100
13180 # number of lines to print data on (printer) (56*)
13182 # number of lines on a sheet of paper (printer) (66*)
13184 # left margin (printer) (0*)
13186 # number of pad chars on new line to printer (0*)
13188 # printer baud rate (9600*)
13190 # printer parity: 00=odd,01=even*,10=space,11=mark
13191 # printer stop bits: 2*/1
13192 # print/do not print guarded areas*
13194 # new line is: 01=LF,10=CR,11=CRLF*
13198 # D menu: 0110 1001 1 0
13199 # LF is newline/LF is down one line, same column*
13200 # wrap to preceding line if move left from col 1*/don't wrap
13201 # wrap to next line if move right from col 80*/don't wrap
13202 # backspace is/is not destructive*
13204 # display*/ignore DEL character
13205 # display will not/will scroll*
13206 # page/column tab stops*
13207 # erase everything*/erase unprotected only
13209 # editing extent: 0=display,1=line*,2=field,3=area
13214 annarbor4080|aa4080|ann arbor 4080,
13217 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
13218 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13219 %{12}%+%;%{64}%+%c,
13220 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
13221 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13223 # Strange Ann Arbor terminal from BRL
13224 aas1901|Ann Arbor K4080 w/S1901 mod,
13227 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
13228 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
13231 # If you're using the GNU termcap library, add
13232 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13233 # to these capabilities. This is the nonstandard GNU termcap scrolling
13234 # capability, arguments are:
13235 # 1. Total number of lines on the screen.
13236 # 2. Number of lines above desired scroll region.
13237 # 3. Number of lines below (outside of) desired scroll region.
13238 # 4. Total number of lines on the screen, the same as the first parameter.
13239 # The generic Ann Arbor entry is the only one that uses this.
13240 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13241 OTbs, am, km, mc5i, mir, xon,
13243 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13244 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
13245 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13246 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13247 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13248 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13249 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13250 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13251 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13252 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13253 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13254 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13255 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13256 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13257 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13258 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13259 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13260 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13261 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
13263 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
13264 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
13267 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
13269 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13270 vpa=\E[%p1%{1}%+%dd,
13272 aaa+rv|ann arbor ambassador in reverse video,
13273 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
13274 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13275 rs1=\E[H\E[7m\E[J$<156>,
13276 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
13277 %;%?%p7%t8;%;m\016,
13278 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
13279 # Ambassador with the DEC option, for partial vt100 compatibility.
13280 aaa+dec|ann arbor ambassador in dec vt100 mode,
13281 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
13282 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
13283 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
13284 %p7%t8;%;m%?%p9%t\017%e\016%;,
13286 aaa-18|ann arbor ambassador/18 lines,
13288 is2=\E7\E[60;0;0;18p\E8,
13289 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
13291 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
13292 use=aaa+rv, use=aaa-18,
13293 aaa-20|ann arbor ambassador/20 lines,
13295 is2=\E7\E[60;0;0;20p\E8,
13296 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
13298 aaa-22|ann arbor ambassador/22 lines,
13300 is2=\E7\E[60;0;0;22p\E8,
13301 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
13303 aaa-24|ann arbor ambassador/24 lines,
13305 is2=\E7\E[60;0;0;24p\E8,
13306 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
13308 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
13309 use=aaa+rv, use=aaa-24,
13310 aaa-26|ann arbor ambassador/26 lines,
13312 is2=\E7\E[60;0;0;26p\E8,
13313 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
13314 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
13315 aaa-28|ann arbor ambassador/28 lines,
13317 is2=\E7\E[60;0;0;28p\E8,
13318 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
13319 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
13320 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
13323 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13324 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
13325 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
13326 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
13327 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13328 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
13329 use=aaa+rv, use=aaa-30-s,
13330 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
13331 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13332 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
13333 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
13334 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13335 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
13336 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
13338 is2=\E7\E[60;0;0;30p\E8,
13339 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
13340 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
13341 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
13342 use=aaa+rv, use=aaa-30,
13343 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
13344 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13346 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
13347 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13348 use=aaa+rv, use=aaa-30,
13349 aaa-36|ann arbor ambassador/36 lines,
13351 is2=\E7\E[60;0;0;36p\E8,
13352 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
13353 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
13354 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
13355 use=aaa+rv, use=aaa-36,
13356 aaa-40|ann arbor ambassador/40 lines,
13358 is2=\E7\E[60;0;0;40p\E8,
13359 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
13360 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
13361 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
13362 use=aaa+rv, use=aaa-40,
13363 aaa-48|ann arbor ambassador/48 lines,
13365 is2=\E7\E[60;0;0;48p\E8,
13366 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
13367 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
13368 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
13369 use=aaa+rv, use=aaa-48,
13370 aaa-60-s|ann arbor ambassador/59 lines+status,
13373 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13374 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
13375 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13376 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
13377 use=aaa+rv, use=aaa-60-s,
13378 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
13379 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
13380 aaa-60|ann arbor ambassador/60 lines,
13382 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
13384 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
13385 use=aaa+rv, use=aaa-60,
13386 aaa-db|ann arbor ambassador 30/destructive backspace,
13388 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
13390 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
13392 flash=\E[>59h$<100>\E[>59l,
13393 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
13394 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
13395 guru+rv|guru changes for reverse video,
13396 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
13397 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
13398 use=guru+rv, use=guru-33,
13399 guru+s|guru status line,
13401 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
13402 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
13403 tsl=\E[>51h\E[1;%p1%dH\E[2K,
13404 guru-nctxt|guru with no saved context,
13405 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
13406 guru-s|guru-33-s|ann arbor guru/33 lines+status,
13408 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
13409 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13410 guru-24|ann arbor guru 24 lines,
13412 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
13414 guru-44|ann arbor guru 44 lines,
13416 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
13418 guru-44-s|ann arbor guru/44 lines+status,
13420 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
13421 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13422 guru-76|guru with 76 lines by 89 cols,
13424 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
13426 guru-76-s|ann arbor guru/76 lines+status,
13428 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
13429 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13430 guru-76-lp|guru-lp|guru with page bigger than line printer,
13431 cols#134, lines#76,
13432 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
13434 guru-76-w|guru 76 lines by 178 cols,
13435 cols#178, lines#76,
13436 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
13438 guru-76-w-s|ann arbor guru/76 lines+status+wide,
13439 cols#178, lines#75,
13440 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
13441 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13442 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
13443 cols#178, lines#76,
13444 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
13446 aaa-rv-unk|ann arbor unknown type,
13447 lh#0, lw#0, nlab#0,
13448 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
13449 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13451 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
13453 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
13455 #### Applied Digital Data Systems (adds)
13457 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
13458 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
13459 # terminals was merged again. Then AT&T sold the terminal business to
13460 # SunRiver, which later changed its name to Boundless Technologies. The
13461 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
13462 # as of early 1995) are at:
13464 # Boundless Technologies
13465 # 100 Marcus Boulevard
13466 # Hauppauge, NY 11788-3762
13467 # Vox: (800)-231-5445
13468 # Fax: (516)-342-7378
13469 # Web: http://boundless.com
13471 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
13472 # In 1995 Boundless acquired DEC's terminals business.
13475 # Regent: lowest common denominator, works on all regents.
13476 # (regent: renamed ":bc:" to ":le:" -- esr)
13477 regent|Adds Regent Series,
13480 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
13481 home=\EY\s\s, ind=^J, ll=^A,
13482 # Regent 100 has a bug where if computer sends escape when user is holding
13483 # down shift key it gets confused, so we avoid escape.
13484 regent100|Adds Regent 100,
13487 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
13488 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
13489 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
13490 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
13491 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
13492 regent20|Adds Regent 20,
13493 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
13495 regent25|Adds Regent 25,
13496 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
13498 regent40|Adds Regent 40,
13500 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
13501 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13502 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
13503 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
13504 smul=\E0`, use=regent25,
13505 regent40+|Adds Regent 40+,
13506 is2=\EB, use=regent40,
13507 regent60|regent200|Adds Regent 60,
13508 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
13509 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
13511 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
13512 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
13513 viewpoint|addsviewpoint|adds viewpoint,
13516 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
13517 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
13518 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
13519 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
13520 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
13521 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
13522 # Some viewpoints have bad ROMs that foo up on ^O
13523 screwpoint|adds viewpoint with ^O bug,
13524 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
13526 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
13527 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
13528 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
13529 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
13530 # invis=01000100 and %c is the logical or of desired attributes.
13531 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
13533 # Update by TD - 2004:
13535 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
13537 # COMMANDS ASCII CODE
13539 # Address, Absolute ESC,=,row,column
13541 # Aux Port Enable ESC,@
13542 # Aux Port Disable ESC,A
13546 # Cursor forward FF
13549 # Cursor supress ETB
13550 # Cursor enable CAN
13551 # Erase to end of line ESC,T
13552 # Erase to end of page ESC,Y
13555 # Keyboard unlock SO
13556 # Read current cursor position ESC,?
13557 # Set Attribute ESC,0,x (see below for values of x)
13558 # Tag bit reset ESC,(
13559 # Tag bit set ESC,)
13560 # Transparent Print on ESC,3
13561 # Transparent Print off ESC,4
13567 # Half Intensity A 0101
13569 # Half Intensity Blinking C 0103
13570 # Reverse Video P 0120
13571 # Reverse Video Half Intensity Q 0121
13572 # Reverse Video Blinking R 0122
13573 # Reverse Video Half Intensity
13575 # Underlined ` 0140
13576 # Underlined Half Intensity a 0141
13577 # Underlined Blinking b 0142
13578 # Underlined Half Intensity
13580 # Video suppress D 0104
13581 vp3a+|viewpoint3a+|adds viewpoint 3a+,
13583 cols#80, it#8, lines#24,
13584 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
13585 cub1=^H, cud1=^J, cuf1=^L,
13586 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
13587 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
13588 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
13589 nel=^M^J, rev=\E0P\E), rmso=\E(,
13590 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
13591 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
13592 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
13593 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
13594 vp60|viewpoint60|addsvp60|adds viewpoint60,
13597 # adds viewpoint 90 - from cornell
13598 # Note: emacs sends ei occasionally to insure the terminal is out of
13599 # insert mode. This unfortunately puts the viewpoint90 IN insert
13600 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
13601 # - :ei=:im=: must be present in the termcap translation.)
13602 # - <xhp> indicates glitch that attributes stick to location
13603 # - <msgr> means it's safe to move in standout mode
13604 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
13606 # Function key and label capabilities merged in from SCO.
13607 vp90|viewpoint90|adds viewpoint 90,
13608 OTbs, bw, msgr, xhp,
13610 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
13611 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
13612 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
13613 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
13614 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
13615 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13616 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
13617 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
13618 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
13619 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
13620 # Note: if return acts weird on a980, check internal switch #2
13621 # on the top chip on the CONTROL pc board.
13622 adds980|a980|adds consul 980,
13625 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
13626 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
13627 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
13628 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
13629 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
13631 #### C. Itoh Electronics
13633 # As of 1995 these people no longer make terminals (they're still in the
13634 # printer business). Their terminals were all clones of the DEC VT series.
13635 # They're located in Orange County, CA.
13638 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
13639 # the delay times and do an auto tab set rather than the indirect
13640 # file used in vt100.
13641 cit80|cit-80|citoh 80,
13644 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
13645 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
13646 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13647 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
13648 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
13649 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
13650 cit101|citc|C.itoh fast vt100,
13653 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
13654 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13655 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
13656 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
13657 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
13658 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13659 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13660 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
13662 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
13663 # The following termcap entry was created from the Callan cd100 entry. The
13664 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
13665 # full selection of combinations of reverse video, underline, and blink.
13666 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
13667 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
13668 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
13669 cit101e|C. Itoh CIT-101e,
13670 OTbs, OTpt, am, mir, msgr,
13671 cols#80, it#8, lines#24,
13672 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
13673 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
13674 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
13675 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
13676 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
13677 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
13678 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
13679 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
13680 smkx=\E=, smso=\E[7m, smul=\E[4m,
13681 # From: David S. Lawyer, June 1997:
13682 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
13683 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
13684 # late 1980's CIT Terminals went out of business.
13685 # There is no need to use the initialization string is=... (by invoking
13686 # tset or setterm etc.) provided that the terminal has been manually set
13687 # up (and the setup saved with ^S) to be compatible with this termcap. To be
13688 # compatible it should be in ANSI mode (not VT52). A set-up that
13689 # works is to set all the manually setable stuff to factory defaults
13690 # by pressing ^D in set-up mode. Then increse the brighness with the
13691 # up-arrow key since the factory default will likely be dim on an old
13692 # terminal. Then change any options you want (provided that they are
13693 # compatible with the termcap). For my terminal I set: Screen
13694 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
13695 # on. I also set up mine for parity (but you may not need it). Then
13696 # save the setup with ^S.
13697 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
13698 cit101e-rv|Citoh CIT-101e (sets reverse video),
13699 am, eo, mir, msgr, xenl, xon,
13700 cols#80, it#8, lines#24,
13701 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13702 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
13703 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13704 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13705 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13706 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13707 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
13708 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13709 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
13710 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
13711 B\E[m\E[20l\E[1;24r\E[24;1H,
13712 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13713 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
13714 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
13715 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
13716 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
13717 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
13718 u7=\E[6n, u8=\E[?6c, u9=\E[c,
13719 cit101e-n|CIT-101e w/o am,
13721 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
13723 cit101e-132|CIT-101e with 132 cols,
13725 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
13726 cit101e-n132|CIT-101e with 132 cols w/o am,
13729 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
13731 # CIE Terminals CIT-500 from BRL
13732 # The following SET-UP modes are assumed for normal operation:
13733 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
13734 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
13735 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
13736 # Other SET-UP modes may be set for operator convenience or communication
13738 # Hardware tabs are assumed to be set every 8 columns; they can be set up
13739 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
13740 # "stty ixon -ixany" to enable DC3/DC1 flow control!
13741 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
13742 cit500|CIE Terminals CIT-500,
13743 OTbs, OTpt, mir, msgr, xon,
13744 OTkn#10, cols#80, it#8, lines#64, vt#3,
13745 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13746 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13747 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13748 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13749 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13750 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
13751 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
13752 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
13753 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
13754 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
13755 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
13756 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
13757 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
13758 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
13759 rmso=\E[m, rmul=\E[m,
13760 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
13761 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
13762 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13764 # C. Itoh printers begin here
13765 citoh|ci8510|8510|c.itoh 8510a,
13768 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
13769 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
13771 citoh-pica|citoh in pica,
13772 is1=\EN, use=citoh,
13773 citoh-elite|citoh in elite,
13776 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13779 citoh-comp|citoh in compressed,
13782 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13783 \,097\,105\,113\,121\,129.,
13785 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
13786 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
13788 is1=\EP, use=citoh,
13789 citoh-6lpi|citoh in 6 lines per inch mode,
13790 is3=\EA, use=citoh,
13791 citoh-8lpi|citoh in 8 lines per inch mode,
13793 is3=\EB, use=citoh,
13795 #### Control Data (cdc)
13798 cdc456|cdc 456 terminal,
13801 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13802 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13803 el=^V, home=^Y, il1=\EL, ind=^J,
13805 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13809 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13810 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13811 kcuu1=^W, khome=^Y,
13812 cdc721ll|CDC Vikingll,
13814 cols#132, lines#24,
13815 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13816 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13817 kcuu1=^W, khome=^Y,
13818 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13822 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13823 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13824 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
13826 # The following switch/key settings are assumed for normal operation:
13827 # 96 chars SCROLL FULL duplex not BLOCK
13828 # Other switches may be set according to communication requirements.
13829 # Insert/delete-character cannot be used, as the whole display is affected.
13830 # "so" & "se" are commented out until jove handles "sg" correctly.
13833 OTkn#10, cols#80, lines#24,
13834 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13835 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13836 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
13837 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13838 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13839 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13840 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13841 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13842 rs1=\031\030\002\003\017,
13844 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13846 # Part of the long initialization string defines the "DOWN" key to the left
13847 # of the tab key to send an ESC. The real ESC key is positioned way out
13850 # The termcap won't work in 132 column mode due to the way it it moves the
13851 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13852 # handle the 721 in 132 column mode.
13854 # (cdc721: changed :ri: to :sr: -- esr)
13855 cdc721-esc|Control Data 721,
13856 OTbs, OTpt, am, bw, msgr, xon,
13857 OTkn#10, cols#80, it#8, lines#30,
13858 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13859 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13860 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13861 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13862 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
13863 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
13864 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
13866 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13867 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13868 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13869 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13870 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
13871 smso=^^D, smul=^\, tbc=^^^RY,
13875 # Getronics is a Dutch electronics company that at one time was called
13876 # `Geveke' and made async terminals; but (according to the company itself!)
13877 # they've lost all their documentation on the command set. The hardware
13878 # documentation suggests the terminals were actually manufactured by a
13879 # Taiwanese electronics company named Cal-Comp. There are known
13880 # to have been at least two models, the 33 and the 50.
13883 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13884 # screen resolution, a larger screen, at least 1 page of memory above and
13885 # below the screen, apparently pages of memory right and left of the screen
13886 # which can be panned, and about 75 function keys (15 function keys x normal,
13887 # shift, control, func A, func B). It also has more setup possibilities than
13888 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13891 # The vt100 emulation works as is. The entry below describes the rather
13892 # non-conformant (but more featureful) ANSI mode.
13894 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13895 visa50|geveke visa 50 terminal in ansi 80 character mode,
13898 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13899 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
13900 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13901 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13902 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13903 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13904 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
13905 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
13906 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
13907 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13908 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13909 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
13910 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13911 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13912 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13913 lf3=A insert line, lf4=A delete line, lf5=A clear,
13914 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13915 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
13916 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13917 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13918 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13921 #### Human Designed Systems (Concept)
13923 # Human Designed Systems
13925 # King of Prussia, PA 19406
13926 # Vox: (610)-277-8300
13927 # Fax: (610)-275-5739
13928 # Net: support@hds.com
13930 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13931 # the character-terminal business now (1995) and making X terminals. In
13932 # particular, the whole `Concept' line described here was discontinued long
13936 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13937 # Extensive changes to c108 by arpavax:eric Feb 1982
13938 # Some unknown person at SCO then translated it to terminfo.
13940 # There seem to be a number of different versions of the C108 PROMS
13941 # (with bug fixes in its Z-80 program).
13943 # The first one that we had would lock out the keyboard of you
13944 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13945 # Try that on your C108 and see if it sends a ^S when you type it.
13946 # If so, you have an old version of the PROMs.
13948 # You should configure the C108 to send ^S/^Q before running this.
13949 # It is much faster (at 9600 baud) than the c100 because the delays
13951 # new status line display entries for c108-8p:
13952 # <is3> - init str #3 - setup term for status display -
13953 # set programmer mode, select window 2, define window at last
13954 # line of memory, set bkgnd stat mesg there, select window 0.
13956 # <tsl> - to status line - select window 2, home cursor, erase to
13957 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13959 # <fsl> - from status line - 1/2 bright off, select window 0
13961 # <dsl> - disable status display - set bkgnd status mesg with
13964 # There are probably more function keys that should be added but
13965 # I don't know what they are.
13967 # No delays needed on c108 because of ^S/^Q handshaking
13969 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
13970 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
13972 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
13973 c108-4p|concept108-4p|concept 108 w/4 pages,
13974 OTbs, eslok, hs, xon,
13976 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
13977 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
13978 %>%t\001%{96}%-%;%{32}%+%c,
13979 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
13980 ind=^J, is1=\EK\E!\E F,
13981 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
13982 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
13983 smcup=\EU\Ev 8p\Ep\r\E\025,
13984 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
13985 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
13986 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
13988 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
13989 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
13991 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
13993 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
13994 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
13997 # These have only window relative cursor addressing, not screen
13998 # relative. To get it to work right here, smcup/rmcup (which
13999 # were invented for the concept) lock you into a one page
14000 # window for screen style programs.
14002 # To get out of the one page window, we use a clever trick:
14003 # we set the window size to zero ("\Ev " in rmcup) which the
14004 # terminal recognizes as an error and resets the window to all
14007 # This trick works on c100 but does not on c108, sigh.
14009 # Some tty drivers use cr3 for concept, others use nl3, hence
14010 # the delays on cr and ind below. This padding is only needed at
14011 # 9600 baud and up. One or the other is commented out depending on
14012 # local conventions.
14014 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14015 # less than 6 but more than 2 will work.
14017 # Note: can't use function keys f7-f10 because they are
14018 # indistinguishable from arrow keys (!), also, del char and
14019 # clear eol use xon/xoff so they probably won't work very well.
14021 # Also note that we don't define insrt/del char/delline/eop/send
14022 # because they don't transmit unless we reset them - I figured
14023 # it was a bad idea to clobber their definitions.
14025 # The <mc5> sequence changes the escape character to ^^ so that
14026 # escapes will be passed through to the printer. Only trouble
14027 # is that ^^ won't be - ^^ was chosen to be unlikely.
14028 # Unfortunately, if you're sending raster bits through to be
14029 # plotted, any character you choose will be likely, so we lose.
14031 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14032 # cannot be # in is2 because it will hang a c100 with no printer
14034 c100|concept100|concept|c104|c100-4p|hds concept 100,
14035 OTbs, am, eo, mir, ul, xenl,
14036 cols#80, lines#24, pb#9600, vt#8,
14037 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14038 cub1=^H, cud1=^J, cuf1=\E=,
14039 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14040 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14041 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14042 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
14044 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14045 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14046 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14047 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14048 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14049 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14050 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14051 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14052 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14053 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14054 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14055 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14056 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14057 smso=\ED, smul=\EG,
14058 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14059 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14060 smso=\EE, use=c100,
14061 oc100|oconcept|c100-1p|old 1 page concept 100,
14065 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14066 # Lots of notes, originally inline, but ncurses doesn't grok that.
14068 # am: not available in power on mode, but turned on with \E[=107;207h in
14069 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14070 # to specify xenl:, but that would have rendered the last space on the
14071 # last line useless.
14072 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14074 # clear: Could be done with \E[2J alone, except that vi (and probably most
14075 # other programs) assume that this also homes the cursor.
14076 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14077 # scroll the window, and go back to window 1.
14078 # is2: the string may cause a warning to be issued by tic that it
14079 # found a very long line and that it suspects that a comma is missing
14080 # somewhere. This warning can be ignored (unless it comes up more than
14081 # once). The initialization string contains the following commands:
14083 # [Setup mode items changed from factory defaults:]
14084 # \E)0 set alternate character set to
14086 # ^O set character set to default
14087 # [In case it wasn't]
14088 # \E[m turn off all attributes
14089 # [In case they weren't off]
14090 # \E[=107; cursor wrap and
14091 # 207h character wrap on
14092 # \E[90;3u set Fkey definitions to "transmit"
14094 # \E[92;3u set cursor key definitions to
14095 # "transmit" defaults
14096 # \E[43;1u set shift F13 to transmit...
14098 # \E[44;1u set shift F14 to transmit...
14100 # \E[45;1u set shift F15 to transmit...
14102 # \E[46;1u set shift F16 to transmit...
14104 # \E[200;1u set shift up to transmit...
14106 # \E[201;1u set shift down to transmit...
14108 # \E[202;1u set shift right to transmit...
14110 # \E[203;1u set shift left to transmit...
14112 # \E[204;1u set shift home to transmit...
14114 # \E[212;1u set backtab to transmit...
14116 # \E[213;1u set shift backspace to transmit...
14118 # \E[214;1u set shift del to transmit...
14120 # [Necessary items not mentioned in setup mode:]
14121 # \E[2!w move to window 2
14122 # \E[25;25w define window as line 25 of memory
14123 # \E[!w move to window 1
14124 # \E[2*w show current line of window 2 as
14126 # \E[2+x set meta key to use high bit
14127 # \E[;3+} move underline to bottom of character
14129 # All Fkeys are set to their default transmit definitions with \E[90;3u
14130 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14131 # setting MUST be redefined or deactivated, because the default is
14132 # contained in almost all of this terminal's Fkey strings! If for some
14133 # reason "quit" cannot be altered, the Fkeys can, but it would be
14134 # necessary to change ^| to ^] in all of these definitions, and add
14135 # \E[2;029!t to is2.
14136 # lines: is set to 24 because this terminal refuses to treat the 25th
14138 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14140 # lm: Pointless, given that this definition locks a single screen of
14141 # memory into view, but what the hey...
14142 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14143 # other attributes alone), but some programs expect this to turn off
14145 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14146 # attributes alone), but some programs expect this to turn off
14148 # sgr: Attributes are set on this terminal with the string \E[ followed by
14149 # a list of attribute code numbers (in decimal, separated by
14150 # semicolons), followed by the character m. The attribute code
14153 # 2 for dim (which is ignored in power on mode);
14157 # 8 for not displayable; and
14158 # =99 for protected (except that there are strange side
14159 # effects to protected characters which make them inadvisable).
14160 # The mapping of terminfo parameters to attributes is as follows:
14161 # %p1 (standout) = bold and inverse together;
14162 # %p2 (underline) = underline;
14163 # %p3 (reverse) = inverse;
14164 # %p4 (blink) = blinking;
14165 # %p5 (dim) is ignored;
14166 # %p6 (bold) = bold;
14167 # %p7 (invisible) = not displayable;
14168 # %p8 (protected) is ignored; and
14169 # %p9 (alt char set) = alt char set.
14170 # The code to do this is:
14172 # %?%p1%p6%O IF (standout; bold) OR
14173 # %t;1 THEN OUTPUT ;1
14175 # %?%p2 IF underline
14176 # %t;4 THEN OUTPUT ;4
14179 # %t;5 THEN OUTPUT ;5
14181 # %?%p1%p3%O IF (standout; reverse) OR
14182 # %t;7 THEN OUTPUT ;7
14184 # %?%p7 IF invisible
14185 # %t;8 THEN OUTPUT ;8
14188 # %?%p9 IF altcharset
14189 # %t^N THEN OUTPUT ^N
14190 # %e^O ELSE OUTPUT ^O
14192 # sgr0: Everything is turned off (including alternate character set), since
14193 # there is no way of knowing what it is that the program wants turned
14195 # smul: The "underline" attribute is reconfigurable to an overline or
14196 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
14197 # bottom of the character cell. This was done to allow for more readable
14198 # underlined characters, and to be able to distinguish between an
14199 # underlined space, an underscore, and an underlined underscore.
14200 # xenl: Terminal can be configured to not need this, but this "glitch"
14201 # behavior is actually preferable with autowrap terminals.
14203 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14204 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14205 # string modifies the 'O' in kf43 to kf46 to a '$'.
14207 # kcbt was originally ^I but redefined in is2=.
14208 # kHOM was \E[H originally but redefined in is2=, as were a number of
14210 # kDC was originally \177 but redefined in is2=.
14212 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14213 # tsl: Go to window 2, then do an hpa=.
14215 #------- flash=\E[8;3!}^G\E[3;3!}
14216 #------- flash=\E[?5h$<100>\E[?5l
14217 # There are two ways to flash the screen, both of which have their drawbacks.
14218 # The first is to set the bell mode to video, transmit a bell character, and
14219 # set the bell mode back - but to what? There is no way of knowing what the
14220 # user's old bell setting was before we messed with it. Worse, the command to
14221 # set the bell mode also sets the key click volume, and there is no way to say
14222 # "leave that alone", or to know what it's set to, either.
14223 # The second way to do a flash is to set the screen to inverse video, pad for a
14224 # tenth of a second, and set it back - but like before, there's no way to know
14225 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14226 # it that way. The point is moot anyway, since vi (and probably other
14227 # programs) assume that by defining flash=, you want the computer to use it
14228 # INSTEAD of bel=, rather than as a secondary type of signal.
14230 #------- cvvis=\E[+{
14231 # The is the power on setting, which is also as visible as the cursor
14233 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14234 # Windowing is possible, but not defined here because it is also used to
14235 # emulate status line functions. Allowing a program to set a window could
14236 # clobber the status line or render it unusable. There is additional memory,
14237 # but screen scroll functions are destructive and do not make use of it.
14239 #------- dim= Not available in power on mode.
14240 # You have a choice of defining low intensity characters as "half bright" and
14241 # high intensity as "normal", or defining low as "normal" and high as "bold".
14242 # No matter which you choose, only one of either "half bright" or "bold" is
14243 # available at any time, so taking the time to override the default is
14246 #------- prot=\E[=0;99m
14247 # Not defined, because it appears to have some strange side effects.
14248 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14249 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14250 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14251 # Available, but making them available to programs is inadvisable.
14252 # The code to do this is:
14253 # %?%p1%{24}%< IF ((key; 24) <;
14254 # %p1%{30}%> ((key; 30) >;
14255 # %p1%{54}%< (key; 54) <
14258 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
14259 # %t\E[ THEN OUTPUT \E[
14260 # %p1%d OUTPUT (key) as decimal
14261 # [next line applies to pfx only]
14265 # %p2%s OUTPUT (string) as string
14267 # [DEL chosen as delimiter, but could be any character]
14268 # [implied: ELSE do nothing]
14272 # Not defined since anything it might do could be done faster and easier with
14273 # either Meta-Shift-Reset or the main power switch.
14275 #------- smkx=\E[1!z
14276 #------- rmkx=\E[!z
14277 # These sequences apply to the cursor and setup keys only, not to the
14278 # numeric keypad. But it doesn't matter anyway, since making these
14279 # available to programs is inadvisable.
14280 # For the key definitions below, all sequences beginning with \E$ are
14281 # custom and programmed into the terminal via is2. \E$ also has no
14282 # meaning to any other terminal.
14284 #------- cmdch=\E[;%p1%d!t
14285 # Available, but making it available to programs is inadvisable.
14286 #------- smxon=\E[1*q
14287 # Available, but making it available to programs is inadvisable.
14288 # Terminal will send XON/XOFF on buffer overflow.
14289 #------- rmxon=\E[*q
14290 # Available, but making it available to programs is inadvisable.
14291 # Terminal will not notify on buffer overflow.
14292 #------- smm=\E[2+x
14294 # Available, but making them available to programs is inadvisable.
14297 # It's not made clear in the manuals, but based on other ansi/vt type
14298 # terminals, it's a good guess that this terminal is capable of both
14299 # "transparent print" (which doesn't copy data to the screen, and
14300 # therefore needs mc5i: specified to say so) and "auxilliary print"
14301 # (which does duplicate printed data on the screen, in which case mc4=
14302 # and mc5= should use the \E[?4i and \E[?5i strings instead).
14304 hds200|Human Designed Systems HDS200,
14305 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
14306 cols#80, it#8, lines#24, lm#0,
14307 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14308 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
14309 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
14310 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14311 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14312 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14313 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14314 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
14315 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
14316 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14318 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
14319 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
14320 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
14321 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
14322 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
14323 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
14324 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
14325 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14326 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
14327 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
14328 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
14329 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
14330 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
14331 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
14332 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
14333 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
14334 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
14335 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
14336 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
14337 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
14338 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
14339 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
14340 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
14341 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
14342 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14343 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
14344 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
14345 vpa=\E[%i%p1%dd, use=ansi+pp,
14347 # <ht> through <el> included to specify padding needed in raw mode.
14348 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
14349 avt-ns|concept avt no status line,
14350 OTbs, am, eo, mir, ul, xenl, xon,
14351 cols#80, it#8, lines#24, lm#192,
14352 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14353 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
14354 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14355 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
14356 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14357 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
14358 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
14359 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
14360 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
14361 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
14362 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
14363 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
14365 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14366 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14367 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
14368 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
14369 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
14370 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14371 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
14372 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
14374 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14375 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
14377 sgr0=\E[m\016$<1>, smacs=\017$<1>,
14378 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
14379 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14380 vpa=\E[%p1%{1}%+%dd,
14381 avt-rv-ns|concept avt in reverse video mode/no status line,
14382 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14384 avt-w-ns|concept avt in 132 column mode/no status line,
14385 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14387 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
14388 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14389 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
14391 # Concept AVT with status line. We get the status line using the
14392 # "Background status line" feature of the terminal. We swipe the
14393 # first line of memory in window 2 for the status line, keeping
14394 # 191 lines of memory and 24 screen lines for regular use.
14395 # The first line is used instead of the last so that this works
14396 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
14397 # assumes an 8 page AVT but lm isn't currently used anywhere.)
14399 avt+s|concept avt status line changes,
14402 dsl=\E[0*w, fsl=\E[1;1!w,
14403 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
14404 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
14405 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
14406 avt|avt-s|concept-avt|avt w/80 columns,
14407 use=avt+s, use=avt-ns,
14408 avt-rv|avt-rv-s|avt reverse video w/sl,
14409 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14410 use=avt+s, use=avt-ns,
14411 avt-w|avt-w-s|concept avt 132 cols+status,
14412 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14413 use=avt+s, use=avt-ns,
14414 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
14415 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14416 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
14418 #### Contel Business Systems.
14421 # Contel c300 and c320 terminals.
14422 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
14424 cols#80, lines#24, xmc#1,
14425 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14426 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
14427 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
14428 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
14429 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
14430 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
14431 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
14432 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
14433 # Contel c301 and c321 terminals.
14434 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
14435 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
14438 #### Data General (dg)
14440 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
14441 # the terminals group at Data General was shut down in 1991; all these
14442 # terminals have thus been discontinued.
14444 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
14445 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
14446 # sequentially, first the unmodified key codes are listed as F1 through F15.
14447 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
14448 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
14449 # F46 through F60. This is done in the private "includes" below whose names
14450 # start with "dgkeys+".
14452 # DG terminals generally support 8 bit characters. For each of these terminals
14453 # two descriptions are supplied:
14454 # 1) A default description for 8 bits/character communications, which
14455 # uses the default DG international character set and keyboard codes.
14456 # 2) A description with suffix "-7b" for 7 bits/character communications.
14457 # This description must use the NON-DEFAULT native keyboard language.
14459 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
14460 # Ctrl/Shift fdkeys (kf34-kf44).
14462 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
14463 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
14464 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
14465 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
14466 kf11=\233011z, kf12=\233012z, kf13=\233013z,
14467 kf14=\233014z, kf15=\233000z, kf16=\233101z,
14468 kf17=\233102z, kf18=\233103z, kf19=\233104z,
14469 kf2=\233002z, kf20=\233105z, kf21=\233106z,
14470 kf22=\233107z, kf23=\233108z, kf24=\233109z,
14471 kf25=\233110z, kf26=\233111z, kf27=\233112z,
14472 kf28=\233113z, kf29=\233114z, kf3=\233003z,
14473 kf30=\233100z, kf31=\233201z, kf32=\233202z,
14474 kf33=\233203z, kf34=\233204z, kf35=\233205z,
14475 kf36=\233206z, kf37=\233207z, kf38=\233208z,
14476 kf39=\233209z, kf4=\233004z, kf40=\233210z,
14477 kf41=\233211z, kf42=\233212z, kf43=\233213z,
14478 kf44=\233214z, kf45=\233200z, kf46=\233301z,
14479 kf47=\233302z, kf48=\233303z, kf49=\233304z,
14480 kf5=\233005z, kf50=\233305z, kf51=\233306z,
14481 kf52=\233307z, kf53=\233308z, kf54=\233309z,
14482 kf55=\233310z, kf56=\233311z, kf57=\233312z,
14483 kf58=\233313z, kf59=\233314z, kf6=\233006z,
14484 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
14485 khome=\233H, kprt=\233i,
14487 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
14488 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
14489 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14490 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
14491 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
14492 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
14493 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
14494 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
14495 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
14496 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
14497 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
14498 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
14499 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
14500 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
14501 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
14502 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
14503 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
14504 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
14505 kf9=\E[009z, khome=\E[H, kprt=\E[i,
14507 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
14508 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
14509 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
14510 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
14511 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
14512 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
14513 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
14514 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
14515 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
14516 kf8=^^x, kf9=^^y, khome=^H,
14518 dgkeys+15|Private entry describing 15 DG mode special keys,
14519 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
14520 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
14521 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
14522 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
14523 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
14524 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
14525 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
14526 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
14527 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
14528 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
14529 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
14532 # Data General color terminals use the "Tektronix" color model. The total
14533 # number of colors varies with the terminal model, as does support for
14534 # attributes used in conjunction with color.
14536 # Removed u7, u8 definitions since they conflict with tack:
14537 # Preserve user-defined colors in at least some cases.
14539 # Default is ACM mode.
14540 # u8=^^F}20^^Fi^^F}21,
14542 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
14544 colors#16, ncv#53, pairs#256,
14546 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14547 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14548 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14549 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14550 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14552 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
14555 # Video attributes are coordinated using static variables set by "sgr", then
14556 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
14557 # (D=dim, U=underline, B=blink, R=reverse.)
14558 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
14560 colors#8, ncv#16, pairs#64,
14561 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
14562 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14563 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14564 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14565 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14566 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14567 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14569 dg+color|Color info for Data General D470C terminals in ANSI mode,
14570 colors#16, ncv#53, pairs#256,
14571 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14572 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14574 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14575 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14577 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14578 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14580 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14581 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14585 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
14587 colors#8, ncv#16, pairs#64,
14589 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14591 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14593 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14595 dgmode+color|Color info for Data General D470C terminals in DG mode,
14596 colors#16, pairs#256,
14597 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14598 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14599 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14600 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14603 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
14605 colors#52, ncv#53, pairs#26,
14606 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
14607 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
14608 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
14610 oc=\036RG01A00FF00000000\036RG01B00000000FF00
14611 \036RG01C007F00000000\036RG01D000000007F00,
14612 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
14613 scp=\036RG2%p1%02X,
14615 # Colors are in the order: normal, reverse, dim, dim + reverse.
14616 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
14618 colors#52, ncv#53, pairs#26,
14619 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
14620 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
14621 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
14622 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
14623 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
14624 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
14625 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
14626 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
14627 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
14628 0000000\036RG01=000000007?00,
14629 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
14630 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
14632 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
14633 # Initialization string 1 sets:
14634 # ^R - vertical scrolling enabled
14635 # ^C - blinking enabled
14636 dg-generic|Generic Data General terminal in DG mode,
14639 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
14640 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
14641 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
14642 smul=^T, use=dgkeys+11,
14644 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
14645 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
14646 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
14647 # maybe they were originally nuls (which would fit).
14649 dg200|data general dasher 200,
14652 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
14653 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
14654 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
14655 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
14656 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
14659 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
14660 dg210|dg-ansi|Data General 210/211,
14663 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
14664 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14665 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14666 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
14667 smso=\E[7;m, smul=\E[4;m,
14668 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
14669 # courtesy of Carlos Rucalde of Vantage Software, Inc.
14670 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
14671 # I suspect the d200 function keys actually work on the dg211, check it out.)
14672 dg211|Data General d211,
14673 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
14674 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
14675 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
14677 # dg450 from Cornell (not official)
14678 dg450|dg6134|data general 6134,
14679 cub1@, cuf1=^X, use=dg200,
14682 # Note: lesser Dasher terminals will not work with vi because vi insists upon
14683 # having a command to move straight down from any position on the bottom line
14684 # and scroll the screen up, or a direct vertical scroll command. The 460 and
14685 # above have both, the D210/211, for instance, has neither. We must use ANSI
14686 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
14687 # backspace on all terminals. This is not so in DG mode.
14688 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
14689 # grounds that there is no matching ":ml:"
14690 dg460-ansi|Data General Dasher 460 in ANSI-mode,
14691 OTbs, am, msgr, ul,
14692 cols#80, it#8, lines#24,
14693 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
14694 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
14695 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
14696 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
14697 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14698 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
14699 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
14700 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
14701 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
14702 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
14703 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
14705 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
14706 u7=\E[6n, u8=\E[5n, u9=\E[0n,
14707 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
14708 # Data General 605x
14709 # Ought to work for a Model 6242, Type D210 as well as a 605x.
14710 # Note that the cursor-down key transmits ^Z. Job control users, beware!
14711 # This also matches a posted description of something called a `Dasher 100'
14712 # so there's a dg100 alias here.
14713 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
14714 dg6053-old|dg100|data general 6053,
14717 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
14718 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
14719 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
14720 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
14721 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
14722 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
14725 # (Some performance can be gained over the generic DG terminal type)
14726 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
14728 home=^P\0\0, ll=^P\0^W, use=dg-generic,
14730 # Like 6053, but adds reverse video and more keypad and function keys.
14731 d200|d200-dg|Data General DASHER D200,
14732 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
14733 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14734 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
14735 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
14738 # DASHER D210 series terminals in ANSI mode.
14739 # Reverse video, no insert/delete character/line, 7 bits/character only.
14741 # Initialization string 1 sets:
14742 # <0 - scrolling enabled
14743 # <1 - blink enabled
14744 # <4 - print characters regardless of attributes
14745 d210|d214|Data General DASHER D210 series,
14748 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
14749 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14750 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14751 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
14752 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
14753 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
14754 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
14756 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
14758 # DASHER D210 series terminals in DG mode.
14759 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
14760 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
14762 ed=^^FF, use=d200-dg,
14764 # DASHER D211 series terminals in ANSI mode.
14765 # Like the D210, but with 8-bit characters and local printer support.
14767 # Initialization string 2 sets:
14769 # 2;1 - 8 bit operations
14770 # 1;1 - 8 bit (international) keyboard language
14771 # \E(B - default primary character set (U.S. ASCII)
14772 # \E)4 - default secondary character set (international)
14773 # ^O - primary character set
14775 d211|d215|Data General DASHER D211 series,
14777 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
14780 # Initialization string 2 sets:
14782 # 2;0 - 7 bit operations
14783 # 1;0 - 7 bit (native) keyboard language
14784 # \E(0 - default character set (the keyboard native language)
14785 # ^O - primary character set
14786 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
14788 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
14790 # Like the D210 series, but adds support for 8-bit characters.
14792 # Reset string 2 sets:
14793 # ^^N - secondary character set
14794 # ^^FS0> - 8 bit international character set
14795 # ^^O - primary character set
14796 # ^^FS00 - default character set (matching the native keyboard language)
14798 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
14800 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
14802 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
14805 # Enhanced DG mode with changes to be more UNIX compatible.
14806 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
14809 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
14810 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
14811 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
14812 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
14813 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
14814 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
14815 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
14816 rs2=\036N\036FS0E\036O\036FS00,
14817 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
14818 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
14820 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
14821 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
14822 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
14824 is3=\036Fz2, use=d216+,
14826 d217-unix|Data General DASHER D217 in DG-UNIX mode,
14828 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
14831 # DASHER D220 color terminal in ANSI mode.
14832 # Like the D470C but with fewer colors and screen editing features.
14834 # Initialization string 1 sets:
14836 # <0 - scrolling enabled
14837 # <1 - blink enabled
14838 # <4 - print characters regardless of attributes
14839 # \E[m - all attributes off
14840 # Reset string 1 sets:
14841 # \Ec - initial mode defaults (RIS)
14843 d220|Data General DASHER D220,
14845 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14846 use=dg+color8, use=d470c,
14848 d220-7b|Data General DASHER D220 in 7 bit mode,
14850 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14851 use=dg+color8, use=d470c-7b,
14853 # Initialization string 3 sets:
14854 # - default cursor (solid rectangle)
14855 # Reset string 2 sets:
14856 # ^^N - secondary character set
14857 # ^^FS0> - 8 bit international character set
14858 # ^^O - primary character set
14859 # ^^FS00 - default character set (matching the native keyboard language)
14861 d220-dg|Data General DASHER D220 color terminal in DG mode,
14863 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
14864 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14867 # DASHER D230C color terminal in ANSI mode.
14868 # Like the D220 but with minor ANSI compatibility improvements.
14870 d230c|d230|Data General DASHER D230C,
14871 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
14872 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14873 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
14874 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
14875 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14876 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14877 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14879 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14882 # DASHER D400/D450 series terminals.
14883 # These add intelligent features like insert/delete to the D200 series.
14885 # Initialization string 2 sets:
14886 # ^^FQ2 - default cursor (solid rectangle)
14887 # ^^FW - character protection disabled
14888 # ^^FJ - normal (80 column) mode
14889 # ^^F\^ - horizontal scrolling enabled (for alignment)
14890 # ^^FX004? - margins at columns 0 and 79
14891 # ^^F] - horizontal scrolling disabled
14892 # ^^O - primary character set
14893 # ^^FS00 - default character set (the keyboard native language)
14894 # - (should reset scrolling regions, but that glitches the screen)
14895 # Reset string 1 sets:
14896 # ^^FA - all terminal defaults except scroll rate
14897 # Reset string 2 sets:
14898 # ^^F] - horizontal scrolling disabled
14899 # ^^FT0 - jump scrolling
14901 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14903 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
14904 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
14905 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
14906 ich1=^^J, il1=^^FH,
14907 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
14909 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
14910 rs1=^^FA, rs2=\036F]\036FT0,
14911 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14912 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14913 sgr0=\017\025\035\036E\036O, smacs=^^N,
14914 vpa=\020\177%p1%c, use=d210-dg,
14916 # DASHER D410/D460 series terminals in ANSI mode.
14917 # These add a large number of intelligent terminal features.
14919 # Initialization string 1 sets:
14921 # <0 - scrolling enabled
14922 # <1 - blink enabled
14923 # <2 - horizontal scrolling enabled (for alignment)
14924 # <4 - print characters regardless of attributes
14925 # \E[5;0v - normal (80 column) mode
14926 # \E[1;1;80w - margins at columns 1 and 80
14928 # 1 - print all characters even if protected
14929 # 6 - character protection disabled
14930 # <2 - horizontal scrolling disabled
14931 # - (should reset scrolling regions, but that glitches the screen)
14933 # Initialization string 2 sets:
14935 # 3;2 - default cursor (solid rectangle)
14936 # 2;1 - 8 bit operations
14937 # 1;1 - international keyboard language
14938 # \E(B - default primary character set (U.S. ASCII)
14939 # \E)4 - default secondary character set (international)
14940 # ^O - primary character set
14942 # Reset string 1 sets:
14943 # \Ec - initial mode defaults (RIS)
14944 # \E[<2h - horizontal scrolling disabled
14946 # Reset string 2 sets:
14948 # 4;0 - jump scrolling
14949 # 2;1 - 8 bit operations
14950 # 1;1 - 8 bit (international) keyboard language
14951 # \E(B - default primary character set (U.S. ASCII)
14952 # \E)4 - default secondary character set (international)
14954 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14956 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14957 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14958 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14959 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14960 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14961 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14962 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14963 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
14964 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14965 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14967 # Initialization string 2 sets:
14969 # 3;2 - default cursor (solid rectangle)
14970 # 2;0 - 7 bit operations
14971 # 1;0 - 7 bit (native) keyboard language
14972 # \E(0 - default character set (the keyboard native language)
14973 # ^O - primary character set
14975 # Reset string 2 sets:
14977 # 4;0 - jump scrolling
14978 # 2;0 - 7 bit operations
14979 # 1;0 - 7 bit (native) keyboard language
14980 # \E(0 - default character set (the keyboard native language)
14982 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
14984 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
14985 rs2=\E[4;0;2;0;1;0v\E(0,
14986 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1
14987 %p5%|%t2;%;m%?%p9%t\016%e\017%;,
14988 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
14990 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
14992 enacs@, rmacs=\036FS00,
14993 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14994 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
14996 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
14999 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15001 # Initialization string 1 sets:
15003 # <0 - scrolling enabled
15004 # <1 - blink enabled
15005 # <2 - horizontal scrolling enabled (for alignment)
15006 # <4 - print characters regardless of attributes
15007 # \E[5;1v - compressed (135 column) mode
15008 # \E[1;1;126 - margins at columns 1 and 126
15010 # 1 - print all characters even if protected
15011 # 6 - character protection disabled
15012 # <2 - horizontal scrolling disabled
15013 # - (should reset scrolling regions, but that glitches the screen)
15015 # Reset string 1 sets:
15016 # \Ec - initial mode defaults (RIS)
15017 # \E[5;1v - compressed (135 column) mode
15018 # \E[1;1;126w - margins at columns 1 and 126
15019 # \E[<2h - horizontal scrolling disabled
15021 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15023 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15024 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15026 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15028 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15029 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15031 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15034 # These add intelligent features like scrolling regions.
15035 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15036 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
15037 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15038 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15039 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15041 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15042 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
15043 vpa=\036FPFF%p1%2.2X,
15044 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15045 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15047 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15049 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15051 rs2=\036P@1\036FK\036FX0083,
15052 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15053 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15055 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15058 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15059 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15061 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15063 clear=\036FG\036PH, fsl=\036F}01\022,
15064 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15065 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15066 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15067 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15070 # Relative cursor motions are confined to the current window,
15071 # which is not what the scrolling region specification expects.
15072 # Thus, relative vertical cursor positioning must be deleted.
15073 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15074 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15076 cud1@, cuu1@, ll@, use=d462+,
15078 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15080 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15082 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15084 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15086 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15089 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15091 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15093 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15095 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15097 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15100 d430c-dg|d430-dg|Data General D430C in DG mode,
15101 use=d413-dg, use=dg+fixed,
15102 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15103 use=d413-dg, use=dg+ccc,
15105 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15106 use=d413-unix, use=dgunix+fixed,
15107 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15108 use=d413-unix-w, use=dgunix+fixed,
15109 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15110 use=d413-unix-25, use=dgunix+fixed,
15111 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15112 use=d413-unix-s, use=dgunix+fixed,
15113 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15114 use=d413-unix-sr, use=dgunix+fixed,
15115 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15116 use=d413-unix, use=dgunix+ccc,
15117 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15118 use=d413-unix-w, use=dgunix+ccc,
15119 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15120 use=d413-unix-25, use=dgunix+ccc,
15121 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15122 use=d413-unix-s, use=dgunix+ccc,
15123 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15124 use=d413-unix-sr, use=dgunix+ccc,
15126 # DASHER D470C color terminal in ANSI mode.
15127 # Like the D460 but with 16 colors and without a compressed mode.
15129 # Initialization string 1 sets:
15131 # <0 - scrolling enabled
15132 # <1 - blink enabled
15133 # <2 - horizontal scrolling enabled (for alignment)
15134 # <4 - print characters regardless of attributes
15135 # \E[1;1;80w - margins at columns 1 and 80
15137 # 1 - print all characters even if protected
15138 # 6 - character protection disabled
15139 # <2 - horizontal scrolling disabled
15140 # - (should reset scrolling regions, but that glitches the screen)
15142 d470c|d470|Data General DASHER D470C,
15143 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15144 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15145 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15146 use=dg+color, use=d460,
15148 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15149 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15150 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15151 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15152 use=dg+color, use=d460-7b,
15154 # Initialization string 2 sets:
15155 # ^^FQ2 - default cursor (solid rectangle)
15156 # ^^FW - character protection disabled
15157 # ^^F\^ - horizontal scrolling enabled (for alignment)
15158 # ^^FX004? - margins at columns 0 and 79
15159 # ^^F] - horizontal scrolling disabled
15160 # ^^O - primary character set
15161 # ^^FS00 - default character set (the keyboard native language)
15162 # - (should reset scrolling regions, but that glitches the screen)
15164 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15165 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15167 use=dgmode+color, use=d460-dg,
15169 # DASHER D555 terminal in ANSI mode.
15170 # Like a D411, but has an integrated phone.
15171 d555|Data General DASHER D555,
15173 d555-7b|Data General DASHER D555 in 7-bit mode,
15175 d555-w|Data General DASHER D555 in wide mode,
15177 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15179 d555-dg|Data General DASHER D555 series in DG mode,
15182 # DASHER D577 terminal in ANSI mode.
15183 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15184 d577|Data General DASHER D577,
15186 d577-7b|Data General DASHER D577 in 7-bit mode,
15188 d577-w|Data General DASHER D577 in wide mode,
15190 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15193 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15196 # DASHER D578 terminal.
15197 # Like a D577, but without compressed mode; like a D470C in this respect.
15199 # Initialization string 1 sets:
15201 # <0 - scrolling enabled
15202 # <1 - blink enabled
15203 # <2 - horizontal scrolling enabled (for alignment)
15204 # <4 - print characters regardless of attributes
15205 # \E[1;1;80w - margins at columns 1 and 80
15207 # 1 - print all characters even if protected
15208 # 6 - character protection disabled
15209 # <2 - horizontal scrolling disabled
15210 # - (should reset scrolling regions, but that glitches the screen)
15212 d578|Data General DASHER D578,
15213 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15214 d578-7b|Data General DASHER D578 in 7-bit mode,
15215 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15217 #### Datamedia (dm)
15219 # Datamedia was headquartered in Nashua, New Hampshire until it went
15220 # out of business in 1993, but the ID plates on the terminals referred
15221 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15222 # manufacturer which threw out all information about the terminals.
15225 cs10|colorscan|Datamedia Color Scan 10,
15228 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
15229 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15230 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15231 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15232 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15233 cs10-w|Datamedia Color Scan 10 with 132 columns,
15235 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15237 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15238 dm1520|dm1521|datamedia 1520,
15240 cols#80, it#8, lines#24,
15241 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
15242 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15243 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
15245 # dm2500: this terminal has both <ich> and <smir>. Applications using
15246 # termcap/terminfo directly (rather than through ncurses) might be confused.
15247 dm2500|datamedia2500|datamedia 2500,
15250 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
15251 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15252 dch1=\020\010\030\035$<10*>,
15253 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15254 ich1=\020\034\030\035$<10*>,
15255 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
15256 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15257 smdc=^P, smir=^P, smso=^N,
15258 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
15259 # also, has a meta-key.
15260 # From: <goldberger@su-csli.arpa>
15261 # (dmchat: ":MT:" changed to ":km:" -- esr)
15262 dmchat|dmchat version of datamedia 2500,
15264 dl1=\020\032\030\035$<2/>,
15265 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
15266 # (dm3025: ":MT:" changed to ":km:" -- esr)
15267 dm3025|datamedia 3025a,
15269 cols#80, it#8, lines#24,
15270 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15271 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
15272 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
15273 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
15274 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
15275 smir=\EP, smso=\EO1,
15276 dm3045|datamedia 3045a,
15277 OTbs, am, eo, km@, ul, xenl,
15278 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
15279 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
15280 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
15281 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
15283 # Datamedia DT80 soft switches:
15284 # 1 0=Jump 1=Smooth
15285 # Autorepeat 0=off 1=on
15286 # Screen 0=Dark 1=light
15287 # Cursor 0=u/l 1=block
15289 # 2 Margin Bell 0=off 1=on
15290 # Keyclick 0=off 1=on
15291 # Ansi/VT52 0=VT52 1=Ansi
15292 # Xon/Xoff 0=Off 1=On
15294 # 3 Shift3 0=Hash 1=UK Pound
15296 # Newline 0=Off 1=On
15297 # Interlace 0=Off 1=On
15299 # 4 Parity 0=Odd 1=Even
15300 # Parity 0=Off 1=On
15301 # Bits/Char 0=7 1=8
15302 # Power 0=60Hz 1=50Hz
15304 # 5 Line Interface 0=EIA 1=Loop
15305 # Aux Interface 0=EIA 1=Loop
15306 # Local Copy 0=Off 1=On
15309 # 6 Aux Parity 0=Odd 1=Even
15310 # Aux Parity 0=Off 1=On
15311 # Aux Bits/Char 0=7 1=8
15312 # CRT Saver 0=Off 1=On
15313 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
15314 dm80|dmdt80|dt80|datamedia dt80/1,
15315 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
15316 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15317 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
15318 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15320 # except in 132 column mode, where it needs a little padding.
15321 # This is still less padding than the vt100, and you can always turn on
15322 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
15324 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
15326 clear=\E[H\E[2J$<50/>, cud1=^J,
15327 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
15328 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
15329 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
15330 dt80-sas|Datamedia DT803/DTX for SAS usage,
15333 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
15334 bel=^G, clear=^L, cr=^M,
15335 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
15336 cub1=^H, cud1=\EB, cuf1=^\,
15337 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
15338 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
15339 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
15340 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
15341 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
15342 smso=\E$2\004, tbc=\E'0,
15344 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
15345 # These aren't end-all Excel termcaps; but do insert/delete char/line
15346 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
15347 # The naming convention has been bent somewhat, with the use of E? (where
15348 # E is for 'Excel') as # a name. This was done to distinguish the entries
15349 # from the other Datamedias in use here, and yet to associate a model of
15350 # the Excel terminals with the regular datamedia terminals that share
15351 # major characteristics.
15352 excel62|excel64|datamedia Excel 62,
15353 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
15354 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15356 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
15357 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
15358 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15360 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
15361 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
15362 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
15363 smir=\E[4h, use=dt80,
15367 # Falco Data Products
15368 # 440 Potrero Avenue
15369 # Sunnyvale, CA 940864-196
15370 # Vox: (800)-325-2648
15371 # Fax: (408)-745-7860
15372 # Net: techsup@charm.sys.falco.com
15374 # Current Falco models as of 1995 are generally ANSI-compatible and support
15375 # emulations of DEC VT-series, Wyse, and Televideo types.
15378 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
15379 # This terminal was released around 1983 and was discontinued long ago.
15380 # The standout and underline highlights are the same.
15381 falco|ts1|ts-1|falco ts-1,
15383 cols#80, it#8, lines#24,
15384 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15385 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15386 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
15387 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15388 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
15389 smir=\Eq, smso=\Eg1, smul=\Eg1,
15390 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
15391 OTbs, am, da, db, mir, msgr, ul,
15392 cols#80, it#8, lines#24,
15393 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
15394 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
15395 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
15396 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
15397 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
15398 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
15399 smso=\Eg4, smul=\Eg1,
15400 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
15401 ts100|ts100-sp|falco ts100-sp,
15402 am, mir, msgr, xenl, xon,
15403 cols#80, it#8, lines#24, vt#3,
15404 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15405 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15406 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15407 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15408 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15409 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15410 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
15411 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
15412 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
15413 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15414 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15415 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15416 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15417 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
15418 %;m%?%p9%t\016%e\017%;$<2>,
15419 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15420 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15422 ts100-ctxt|falco ts-100 saving context,
15423 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
15425 #### Florida Computer Graphics
15428 # Florida Computer Graphics Beacon System, using terminal emulator program
15429 # "host.com", as provided by FCG. This description is for an early release
15430 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
15433 # From: David Bryant <cbosg!djb> 1/7/83
15434 beacon|FCG Beacon System,
15437 bel=\ESTART\r\E37\r\EEND\r$<1>,
15438 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
15439 cub1=^H, cud1=^J, cuf1=\EV,
15440 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
15441 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
15442 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
15443 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
15444 rmul=\ESTART\r\E60\,0\r\EEND\r,
15445 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
15446 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
15447 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
15448 smul=\ESTART\r\E60\,1\r\EEND\r,
15453 # The f1720a differences from ANSI: no auto margin, destructive
15454 # tabs, # of lines, funny highlighting and underlining
15455 f1720|f1720a|fluke 1720A,
15457 cols#80, lines#16, xmc#1,
15458 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
15459 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
15460 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
15461 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15462 smso=\E[7m, smul=\E[4m,
15464 #### Liberty Electronics (Freedom)
15466 # Liberty Electronics
15467 # 48089 Fremont Blvd
15469 # Vox: (510)-623-6000
15470 # Fax: (510)-623-7021
15472 # From: <faletti@berkeley.edu>
15473 # (f100: added empty <acsc> to suppress a tic warning;
15474 # made this relative to adm+sgr -- note that <invis> isn't
15475 # known to work for f100 but does on the f110. --esr)
15476 f100|freedom|freedom100|freedom model 100,
15477 OTbs, am, bw, hs, mir, msgr, xon,
15479 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
15480 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15481 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
15482 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
15483 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
15484 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
15485 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
15486 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15487 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
15488 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
15489 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15490 f100-rv|freedom-rv|freedom 100 in reverse video,
15491 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
15492 # The f110 and f200 have problems with vi(1). They use the ^V
15493 # code for the down cursor key. When kcud1 is defined in terminfo
15494 # as ^V, the Control Character Quoting capability (^V in insert mode)
15495 # is lost! It cannot be remapped in vi because it is necessary to enter
15496 # a ^V to to quote the ^V that is being remapped!!!
15498 # f110/f200 users will have to decide whether
15499 # to lose the down cursor key or the quoting capability. We will opt
15500 # initially for leaving the quoting capability out, since use of VI
15501 # is not generally applicable to most interactive applications
15502 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
15503 f110|freedom110|Liberty Freedom 110,
15506 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
15507 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
15508 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
15509 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15510 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
15511 smso=\EG<, tsl=\Ef, use=f100,
15512 f110-14|Liberty Freedom 110 14inch,
15514 f110-w|Liberty Freedom 110 - 132 cols,
15515 cols#132, use=f110,
15516 f110-14w|Liberty Freedom 110 14in/132 cols,
15519 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15520 f200|freedom200|Liberty Freedom 200,
15521 OTbs, am, eslok, hs, mir, msgr, xon,
15522 cols#80, it#8, lines#24, wsl#80,
15523 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
15524 clear=^Z, cnorm=\E.1, cr=^M,
15525 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
15526 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15527 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
15528 flash=\Eo$<200/>\En, fsl=^M, home=^^,
15529 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
15530 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
15531 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15532 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15533 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15534 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
15535 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15536 f200-w|Liberty Freedom 200 - 132 cols,
15537 cols#132, use=f200,
15538 # The f200 has the ability to reprogram the down cursor key. The key is
15539 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
15540 # so powering the terminal off and on will not cause the change to be lost.
15541 f200vi|Liberty Freedom 200 for vi,
15542 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
15543 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
15544 cols#132, use=f200vi,
15548 # Graphon Corporation
15549 # 544 Division Street
15550 # Campbell, CA 95008
15551 # Vox: (408)-370-4080
15552 # Fax: (408)-370-5047
15553 # Net: troy@graphon.com (Troy Morrison)
15556 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
15557 # including one odd hybrid that starts out life on power-up as a character
15558 # terminal, than can be switched to X graphics mode (driven over the serial
15559 # line) by an escape sequence. No info on this beast yet.
15560 # (go140: I added <rmam>/<smam> based on the init string -- esr)
15561 go140|graphon go-140,
15563 cols#80, it#8, lines#24,
15564 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
15565 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15566 ed=\E[J$<10/>, el=\E[K, ht=^I,
15567 if=/usr/share/tabset/vt100, il1=\E[L,
15568 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15569 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
15570 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
15571 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
15572 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
15573 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15574 go140w|graphon go-140 in 132 column mode,
15577 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15579 # Hacked up vt200 termcap to handle GO-225/VT220
15580 # From: <edm@nwnexus.WA.COM>
15581 # (go225: I added <rmam>/<smam> based on the init string -- esr)
15582 go225|go-225|Graphon 225,
15583 OTbs, am, mir, xenl,
15584 cols#80, it#8, lines#25, vt#3,
15585 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
15586 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
15587 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15588 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
15589 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
15590 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15591 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
15592 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
15593 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
15594 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
15595 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
15596 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
15598 #### Harris (Beehive)
15600 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
15601 # Their terminal group is ancient history now (1995) though the parent
15602 # company is still in business.
15605 # Beehive documentation is undated and marked Preliminary and has no figures
15606 # so we must have early Superbee2 (Model 600, according to phone conversation
15607 # with mfr.). It has proved reliable except for some missing padding
15608 # (notably after \EK and <nl> at bottom of screen).
15610 # The key idea is that AEP mode is poison for <cup> & that US's in
15611 # the local memory should be avoided like the plague. That means
15612 # that the 2048 character local buffer is used as 25 lines of 80
15613 # characters, period. No scrolling local memory, folks. It also
15614 # appears that we cannot use naked INS LINE feature since it uses
15615 # US. The sbi fakes <il1> with an 80-space insert that may be too
15616 # slow at low speeds; also spaces get converted to \040 which is
15617 # too long for some programs (not vi). DEL LINE is ok but slow.
15619 # The <nl> string is designed for last line of screen ONLY; cup to
15620 # 25th line corrects the motion inherent in scrolling to Page 1.
15622 # There is one understood bug. It is that the screen appears to
15623 # pop to a new (blank) page after a <nel>, or leave a half-line
15624 # ellipsis to a quad that is the extra 48 memory locations. The
15625 # data received is dumped into memory but not displayed. Not to
15626 # worry if <cup> is being used; the lines not displayed will be,
15627 # whenever the cursor is moved up there. Since <cup> is addressed
15628 # relative to MEMORY of window, nothing is lost; but beware of
15629 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
15630 # therefore, is setenv MORE -c .
15632 # WARNING: Not all features tested.
15634 # Timings are assembled from 3 sources. Some timings may reflect
15635 # SB2/Model 300 that were used if more conservative.
15636 # Tested on a Model 600 at 1200 and 9600 bd.
15638 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
15639 # placed on the keyboard and useless because of AEP, is made
15640 # into a backspace key. In use ESC must be pressed twice (to send)
15641 # and sending ^C must be prefixed by ESC to avoid that weird
15642 # transmit mode associated with ENTER key.
15644 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
15645 # the screen, then it has dropped into ENTER mode; hit
15646 # RESET--ONLINE--!tset.
15648 # As delivered this machine has a FATAL feature that will throw
15649 # it into that strange transmit state (SPOW) if the space bar is
15650 # hit after a CR is received, but before receiving a LF (or a
15653 # The circuits MUST be modified to eliminate the SPOW latch.
15654 # This is done by strapping on chip A46 of the I/O board; cut
15655 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
15656 # chip. This mod has been checked out on a Mod 600 of Superbee II.
15657 # With this modification absurdly high timings on cr are
15660 # NOTE WELL that the rear panel switch should be set to CR/LF,
15663 sb1|beehive superbee,
15664 OTbs, am, bw, da, db, mir, ul, xsb,
15665 cols#80, lines#25, xmc#1,
15666 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
15667 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
15668 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
15669 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
15670 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15671 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15672 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15673 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
15674 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
15675 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
15676 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
15677 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
15678 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
15679 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
15680 smso=\E_1, smul=\E_0, tbc=\E3,
15681 sbi|superbee|beehive superbee at Indiana U.,
15683 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
15685 # Alternate (older) description of Superbee - f1=escape, f2=^C.
15686 # Note: there are at least 3 kinds of superbees in the world. The sb1
15687 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
15688 # The sb3 puts garbage on the bottom of the screen when you scroll with
15689 # the switch in the back set to CRLF instead of AEP. This description
15690 # is tested on the sb2 but should work on all with either switch setting.
15691 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
15692 # the other two if you want to try to hit that tiny escape key.
15693 # This description is tricky: being able to use cup depends on there being
15694 # 2048 bytes of memory and the hairy <nl> string.
15695 superbee-xsb|beehive super bee,
15697 cols#80, it#8, lines#25,
15698 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
15699 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
15700 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
15701 home=\EH, ht=^I, hts=\E1,
15702 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
15703 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
15704 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
15705 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
15706 # This loses on lines > 80 chars long, use at your own risk
15707 superbeeic|super bee with insert char,
15708 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
15709 sb2|sb3|fixed superbee,
15710 xsb@, use=superbee,
15712 #### Beehive Medical Electronics
15714 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
15715 # Regarding your question though; Beehive terminals weren't made by Harris.
15716 # They were made by Beehive Medical Electronics in Utah. They went out of
15717 # business in the early '80s.
15719 # (OK, then, I don't know why a couple of these say "harris beehive".)
15722 # Reports are that most of these Beehive entries (except superbee) have not
15723 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
15725 # (bee: <ich1> was empty, which is obviously bogus -- esr)
15726 beehive|bee|harris beehive,
15729 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
15730 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
15731 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
15732 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15733 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
15734 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
15735 smir=\EQ, smso=\EdP, smul=\Ed`,
15736 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
15737 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
15738 # look at those spaces in <rmso>/<smso>. Seems strange to me...
15739 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
15740 # really care, cook up one using ^F -- esr)
15741 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
15743 cols#80, it#8, lines#20,
15744 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
15745 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
15746 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
15747 beehive4|bh4|beehive 4,
15750 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
15751 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
15752 # There was an early Australian kit-built computer called a "Microbee".
15753 # It's not clear whether this is for one of those or for a relative
15755 microb|microbee|micro bee series,
15757 cols#80, it#8, lines#24,
15758 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15759 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15760 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15761 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
15762 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
15763 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
15765 # 8675, 8686, and bee from Cyrus Rahman
15766 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
15767 ha8675|harris 8675,
15768 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
15769 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
15770 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
15771 kf8=\177, kf9=\Ee, use=bee,
15772 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
15774 ha8686|harris 8686,
15775 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
15776 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
15777 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
15779 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
15780 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
15781 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
15782 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
15787 # Hazeltine appears to be out of the terminal business as of 1995. These
15788 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
15789 # Harris. They have a hazeltine.com domain (but no web page there ) and can
15793 # 450 East Pulaski Road
15794 # Greenlawn, New York 11740
15796 # As late as 1993, manuals for the terminal product line could still be
15799 # TRW Customer Service Division
15802 # Fairfield, NJ 07007-2078
15804 # They're now (1998) a subsidiary of General Electric, operating under the
15805 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
15806 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
15809 # Since <cuf1> is blank, when you want to erase something you
15810 # are out of luck. You will have to do ^L's a lot to
15811 # redraw the screen. h1000 is untested. It doesn't work in
15812 # vi - this terminal is too dumb for even vi. (The code is
15813 # there but it isn't debugged for this case.)
15814 hz1000|hazeltine 1000,
15817 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
15819 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
15820 hz1420|hazeltine 1420,
15823 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
15824 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
15825 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
15827 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
15828 # freakout with out-of-range args and tn3270. No hz since it needs to
15830 hz1500|hazeltine 1500,
15833 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15834 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
15835 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
15836 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
15837 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
15838 # h1510 assumed to be in sane escape mode. Else use h1500.
15839 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
15840 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
15841 # removed incorrect and overridden ":do=^J:" -- esr)
15842 hz1510|hazeltine 1510,
15845 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
15846 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
15847 el=\E^O, il1=\E^Z, ind=^J,
15849 # The following switch settings are assumed for normal operation:
15850 # FULL CR U/L_CASE ESCAPE
15851 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
15852 # Other switches may be set for operator convenience or communication
15854 hz1520|Hazeltine 1520,
15855 OTbs, am, bw, msgr,
15857 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
15858 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15859 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
15860 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
15861 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
15862 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
15863 # This version works with the escape switch off
15864 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
15865 hz1520-noesc|hazeltine 1520,
15868 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15869 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
15870 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
15871 # Note: the h1552 appears to be the first Hazeltine terminal which
15872 # is not braindamaged. It has tildes and backprimes and everything!
15873 # Be sure the auto lf/cr switch is set to cr.
15874 hz1552|hazeltine 1552,
15876 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15877 lf2=red, lf3=green, use=vt52,
15878 hz1552-rv|hazeltine 1552 reverse video,
15879 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
15880 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15881 hz2000|hazeltine 2000,
15884 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
15885 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15886 il1=~\032$<6>, ind=^J, pad=\177,
15887 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15888 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15889 # to work ok. There is one problem though if one types a lot of garbage
15890 # characters very fast vi seems not able to keep up and hangs while trying
15891 # to insert. That's in insert mode while trying to insert in the middle of
15892 # a line. It might be because the Esprit doesn't have insert char and delete
15893 # char as a built in function. Vi has to delete to end of line and then
15894 # redraw the rest of the line.
15895 esprit|Hazeltine Esprit I,
15898 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
15899 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15900 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
15901 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
15902 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
15903 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
15904 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15905 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15906 esprit-am|hazeltine esprit auto-margin,
15908 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15909 # Vi it seems always wants to send a control J for "do" and it turned out
15910 # that the terminal would work somewhat if the auto LF/CR was turned off.
15911 # (hmod1: removed :dn=~^K: -- esr)
15912 hmod1|Hazeltine Modular 1,
15915 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15916 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15917 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15918 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15920 # Hazeltine Executive 80 Model 30 (1554?)
15921 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15922 # Like VT100, except for different "am" behavior.
15923 hazel|exec80|h80|he80|Hazeltine Executive 80,
15925 cols#80, it#8, lines#24, vt#3,
15926 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15927 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15928 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
15929 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15930 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15931 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15932 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15933 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15934 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15935 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15936 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15937 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15943 ibm327x|line mode IBM 3270 style,
15945 clear=^M^J, el=^M, home=^M,
15947 ibm3101|i3101|IBM 3101-10,
15950 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15951 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15952 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
15953 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
15954 ibm3151|IBM 3151 display,
15955 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15956 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
15957 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
15958 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15959 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15960 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15961 # removed kend, knp, kpp -TD
15963 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15964 # Added ich1 (kich1 without ich1 doesn't make sense).
15965 # Added il1 (kil1 without il1 doesn't make sense).
15966 # Added xon (terminal uses XON/XOFF flow control).
15968 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
15969 OTbs, am, mir, msgr, xon,
15970 cols#80, it#8, lines#24,
15971 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
15973 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
15974 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15975 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
15976 ich1=\EP \010, il1=\EN, ind=^J, invis=\E4P, kbs=^H, kcbt=\E2,
15977 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15978 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
15979 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
15980 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
15981 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
15982 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
15983 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
15984 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
15985 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
15986 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
15987 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
15988 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
15989 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
15990 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
15992 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
15993 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
15995 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15996 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
15999 ibm3162|IBM 3162 display,
16000 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16001 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16004 # This really should not use setab/setaf, but it is clear that the
16005 # original terminfo does not toggle red/blue colors as in setb/setf.
16006 ibm3164|i3164|IBM 3164,
16008 colors#8, pairs#64,
16009 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16010 setab=\E4 %p1%{64}%+%c,
16011 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16012 smcup=\E!9/N\E>B, use=ibm3161,
16014 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16016 cols#80, it#8, lines#25,
16017 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16019 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16020 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16021 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16022 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16023 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16024 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16025 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16026 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16027 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16028 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16029 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16030 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16031 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16032 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16033 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16034 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16035 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16036 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16037 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16038 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16039 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16040 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16041 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16043 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16045 ibmaed|IBM Experimental display,
16046 OTbs, am, eo, msgr,
16047 cols#80, it#8, lines#52,
16048 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16049 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16050 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16051 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16052 rmso=\E0, sgr0=\E0, smso=\E0,
16053 ibm-apl|apl|IBM apl terminal simulator,
16054 lines#25, use=dm1520,
16055 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16056 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16057 ibmmono|IBM workstation monochrome,
16059 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16060 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16061 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16062 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16063 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16064 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16066 ibmega|IBM Enhanced Color Display,
16067 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
16068 nel=^M^J, use=ibmmono,
16069 # This color scheme is assumed in some recent IBM terminal descriptions
16070 # (green on black, emulated on a 16-color terminal).
16071 ibm+color|IBM color definitions,
16072 colors#8, ncv#3, pairs#64,
16074 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16075 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16076 %=%t46m%e%p1%{7}%=%t107m%;,
16077 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16078 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16079 %=%t36m%e%p1%{7}%=%t97m%;,
16080 ibm+16color|IBM aixterm color definitions,
16081 colors#16, pairs#256,
16082 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16083 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16084 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16085 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16086 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16087 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16088 ibm5154|IBM 5154 Color display,
16089 colors#8, ncv@, pairs#64,
16090 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16092 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16093 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16095 ibmvga-c|IBM VGA display color termcap,
16096 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
16097 nel=^M^J, use=ibmega-c,
16098 ibmvga|IBM VGA display,
16099 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
16100 nel=^M^J, use=ibmega,
16101 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16102 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16104 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16105 ibm6155|IBM 6155 Black & White display,
16106 blink@, bold@, use=ibm5151,
16107 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16108 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16110 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16111 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16113 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16115 ibm6154|IBM 6154 Color displays,
16116 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16117 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16119 sgr0=\E[0;10m, use=ibm5154,
16120 ibm6153|IBM 6153 Black & White display,
16121 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16122 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16124 sgr0=\E[0;10m, use=ibm5151,
16125 ibm6153-90|IBM 6153 Black & White display,
16127 blink@, bold@, use=ibm5151,
16128 ibm6153-40|IBM 6153 Black & White display,
16129 cols#40, lines#12, use=ibm6153-90,
16130 ibm8512|ibm8513|IBM color VGA Terminal,
16132 cols#80, it#8, lines#25,
16133 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16134 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
16135 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16136 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16137 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16138 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16139 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16140 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16141 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16142 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16143 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16144 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16145 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16147 hft-c|HFT with Color,
16148 colors#8, pairs#64,
16149 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16150 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16151 use=ibm5151, use=ibm+color,
16152 hft-c-old|HFT with Color PC850,
16153 colors#8, pairs#64,
16154 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16156 hft-old|AIWS High Function Terminal,
16159 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16160 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16161 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16162 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
16163 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16164 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16165 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16166 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16167 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16168 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16169 ibm-system1|system1|ibm system/1 computer,
16172 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16173 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16175 # lft-pc850 : IBM Low Function Terminal Device
16176 # lft "supports" underline, bold, and blink in the sense that the lft code
16177 # sets all the right bits. HOWEVER, depending upon the adapter, these
16178 # attributes may or may not be supported by the device driver.
16179 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16181 cols#80, it#8, lines#25,
16182 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16184 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16185 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16186 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16187 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16188 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16189 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16190 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16191 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16192 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16193 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16194 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16195 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16196 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16197 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16198 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16199 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16200 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16201 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16202 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16203 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16204 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16205 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16206 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16207 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16208 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16210 # "Megapel" refers to the display adapter, which was used with the IBM RT
16212 ibm5081|hft|IBM Megapel Color display,
16213 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16214 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16215 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16218 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16220 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16222 ibm8514|IBM 8514/a color VGA display,
16224 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16225 ibm8514-c|IBM 8514 color display with standout and underline,
16228 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
16229 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
16233 # AIX entries. IBM ships these with AIX 3.2.5.
16234 # -- added rc, sc based on manpage -TD
16235 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16236 aixterm|IBM Aixterm Terminal Emulator,
16238 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16239 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
16240 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16241 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16242 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
16243 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16245 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16246 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16247 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16249 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16250 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16252 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16253 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16255 tsl=\E[?%p1%dT, use=ibm6153,
16256 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
16257 acsc@, use=aixterm,
16258 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
16259 acsc@, use=aixterm-m,
16261 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
16262 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
16263 use=ibm+16color, use=aixterm,
16265 #### Infoton/General Terminal Corp.
16268 # gt100 sounds like something DEC would come out with. Let's hope they don't.
16269 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
16272 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16273 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
16274 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
16275 ind=^J, rmso=\Ea, smso=\Eb,
16279 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
16280 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
16281 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
16282 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
16283 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
16287 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
16288 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
16289 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
16293 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
16294 ed=^K, ind=^J, ll=^H^\,
16296 # The ICL6402 was actually the Kokusai Display System 6402.
16297 # The 6404 was the KDS7372 (color version of the 6402).
16299 # ICL6404 control codes follow:
16302 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16303 #ctrl-A set SOM position at cursor position
16309 #ctrl-L Cursor right
16310 #ctrl-M Carriage return
16311 #ctrl-N Disable xon/xoff to host
16312 #ctrl-O Enable xon/xoff to host
16313 #ctrl-R Enable bidirectional mode
16314 #ctrl-T Disable bidirectional mode
16315 #ctrl-V Cursor down
16316 #ctrl-Z Clear unprotected data to insert char
16317 #ctrl-^ Cursor home
16320 #ESC lead-in char for multiple character command
16322 #ESC space R execute power on sequence
16323 #ESC ! p1 p2 define scroll region:
16324 # p1 = scroll top line: 20h - 37h
16325 # p1 = scroll bottom line: 20h - 37h
16326 #ESC " unlock keyboard
16327 #ESC # lock keyboard
16328 #ESC $ Semi-graphics mode on
16329 #ESC % Semi-graphics mode off
16330 #ESC & protect mode on
16331 #ESC ' protect mode off
16332 #ESC ( write protect mode off (full intensity)
16333 #ESC ) write protect mode on (half intensity)
16335 #ESC * clear screen
16336 #ESC + clear unprotected data to insert char
16337 #ESC , clear unprotected data to half intensity spaces
16338 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
16339 # p1 = page number 0 - 3
16340 # p2 = row 20h - 7fh
16341 # p3 = column (lo) 20h - 7fh
16342 # p4 = column (hi) 20h - 21h (only 132 col)
16343 #ESC . p1 set cursor style:
16344 # p1 = 0 invisible cursor
16345 # p1 = 1 block blinking cursor
16346 # p1 = 2 block steady cursor
16347 # p1 = 3 underline blinking cursor
16348 # p1 = 4 underline steady cursor
16349 #ESC / transmit cursor location (page, row, column)
16350 #ESC 0 p1 p2 p3 p4 program edit key:
16351 # p1 = edit key code: '@'-'S', '`'-'s'
16352 # p2 p3 p4 = program data (3 bytes)
16355 #ESC 2 clear tab at cursor
16356 #ESC 3 clear all tabs
16357 #ESC 4 send unprotect line to cursor
16358 #ESC 5 send unprotect page to cursor
16359 #ESC 6 send line to cursor
16360 #ESC 7 send page to cursor
16361 #ESC 8 n set scroll mode:
16362 # n = 0 set jump scroll
16363 # n = 1 set smooth scroll
16364 #ESC 9 n control display:
16365 # n = 0 display off
16367 #ESC : clear unprotected data to null
16368 #ESC ; clear unprotected data to insert char
16371 #ESC = p1 p2 address cursor to row, column
16372 # p1 = row 20h - 7fh
16373 # p2 = column (lo) 20h - 7fh
16374 # p3 = column (hi) 20h - 21h (only 132 col)
16375 #ESC > keyclick off
16376 #ESC ? transmit cursor location (row, column)
16378 #ESC @ copy print mode on
16379 #ESC A copy print mode off
16380 #ESC B block mode on
16381 #ESC C block mode off (conversation mode)
16382 #ESC D F set full duplex
16383 #ESC D H set half duplex
16385 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
16386 # 0 = black, 1 = red, 2 = green, 3 = yellow
16387 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
16388 #ESC G n set serial field attribute (n = 30h - 3Fh)
16389 #ESC H n full graphics mode:
16390 # n = 0 exit full graphics mode
16391 # n = 1 enter full graphics mode
16394 #ESC K forward page
16396 #ESC L unformatted page print
16397 #ESC M L move window left (132 col mode only)
16398 #ESC M R move window right (132 col mode only)
16399 #ESC N set page edit (clear line edit)
16400 #ESC O set line edit (clear page edit)
16401 #ESC P formatted page print
16402 #ESC Q character insert
16404 #ESC S send message unprotected only
16405 #ESC T erase line to insert char
16406 #ESC U set monitor mode (see ESC X, ESC u)
16408 #ESC V n select video attribute mode:
16409 # n = 0 serial field attribute mode
16410 # n = 1 parallel character attribute mode
16411 #ESC V 2 n define line attribute:
16412 # n = 0 single width single height
16413 # n = 1 single width double height
16414 # n = 2 double width single height
16415 # n = 3 double width double height
16416 #ESC V 3 n select character font:
16417 # n = 0 system font
16418 # n = 1 user defined font
16419 #ESC V 4 n select screen mode:
16420 # n = 0 page screen mode
16421 # n = 1 virtual screen mode
16422 #ESC V 5 n control mouse mode:
16423 # n = 0 disable mouse
16424 # n = 1 enable sample mode
16425 # n = 2 send mouse information
16426 # n = 3 enable request mode
16427 #ESC W character delete
16428 #ESC X clear monitor mode (see ESC U, ESC u)
16429 #ESC Y erase page to insert char
16431 #ESC Z n send user/status line:
16432 # n = 0 send user line
16433 # n = 1 send status line
16434 # n = 2 send terminal ID
16435 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
16439 # 3 = blink blank (= blank)
16441 # 5 = reverse blank
16442 # 6 = reverse blink
16443 # 7 = reverse blink blank (= reverse blank)
16445 # 9 = underline blank
16446 # : = underline blink
16447 # ; = underline blink blank
16448 # < = reverse underline
16449 # = = reverse underline blank
16450 # > = reverse underline blink
16451 # ? = reverse underline blink blank
16452 # p2, p3: f/grnd, b/grnd colour
16453 # (see ESC F for colours)
16454 # use ZZ for mono, eg.
16455 # ESC [ 0 Z Z for normal
16456 # ESC [ 4 Z Z for inverse etc.
16458 #ESC \ n set page size:
16459 # n = 1 24 lines/page
16460 # n = 2 48 lines/page
16461 # n = 3 72 lines/page
16462 # n = 4 96 lines/page
16463 #ESC ] n set Wordstar mode:
16464 # n = 0 normal (KDS7372) mode
16465 # n = 1 Wordstar mode
16467 #ESC b set foreground colour screen
16469 #ESC c n enter self-test mode:
16470 # n = 0 exit self test mode
16474 # n = 4 screen display test
16475 # n = 5 main/printer port test
16476 # n = 6 mouse port test
16477 # n = 7 graphics board test
16478 # n = 8 graphics memory test
16479 # n = 9 display all 'E'
16480 # n = : display all 'H'
16481 #ESC d set background colour screen
16483 #ESC e n program insert char (n = insert char)
16484 #ESC f text CR load user status line with 'text'
16486 #ESC g display user status line on 25th line
16487 #ESC h display system status line on 25th line
16489 #ESC j reverse linefeed
16490 #ESC k n duplex/local edit mode:
16491 # n = 0 duplex edit mode
16492 # n = 1 local edit mode
16493 #ESC l n select virtual screen:
16496 #ESC m save current config to NVRAM
16497 #ESC n p1 select display screen:
16502 #ESC o p1 p2 set characters/line and attribute:
16503 # p1 = 0 80 chars/line
16505 #ESC o p1 p2 set characters/line and attribute:
16506 # p1 = 0 80 chars/line
16507 # p1 = 1 132 chars/line
16508 # p2 = 0 single width single height
16509 # p2 = 1 single width double height
16510 # p2 = 2 double width single height
16511 # p2 = 3 double width double height
16513 #ESC q insert mode on
16514 #ESC r edit mode on
16515 #ESC s send message all
16516 #ESC t erase line to null
16517 #ESC u clear monitor mode (see ESC U, ESC X)
16518 #ESC v autopage mode on
16519 #ESC w autopage mode off
16520 #ESC x p1 p2 p3 define delimiter code...
16521 #ESC y erase page to null
16523 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
16524 # p1 = starting row
16525 # p2 = starting column
16529 #ESC { p1 p2 p3 p4 configure main port
16530 # (baud, stop bits, parity, word length)
16532 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
16533 # p1 = function key code:
16534 # '1' - ';' normal f1- f11
16535 # '<' - 'F' shifted f1 - f11
16536 # p2 = program mode:
16540 # Ctrl-Y = terminator
16541 # (use Ctrl-P to escape ^P, ^Y )
16543 #ESC } p1 p2 p3 p4 configure printer port
16544 # (baud, stop bits, parity, word length)
16545 #ESC ~ send system status
16547 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
16549 # Entry is by esr going solely on above information and is UNTESTED.
16550 # This actually looks a lot like a Televideo 9xx.
16551 # This entry uses page 0 and is monochrome; I'm not brave enough to try
16552 # to make color work without a test terminal. The <am> capability is a guess.
16553 # The initialization string sets conversation mode, blinking underline cursor,
16554 # full duplex, parallel attribute mode, display user status line, white
16555 # foreground, black background, normal highlight.
16557 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
16560 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
16562 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
16563 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
16564 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
16565 hts=\E1, il1=\EE, invis=\E[1ZZ,
16566 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
16567 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
16568 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
16569 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
16570 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
16571 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
16572 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
16573 rs2=\Eo1, use=icl6404,
16575 #### Interactive Systems Corp
16577 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
16578 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
16579 # bought out by Sun.
16582 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
16583 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
16584 # ":le=^_:" later overridden -- esr)
16585 intext|Interactive Systems Corporation modified owl 1200,
16587 cols#80, it#8, lines#24, xmc#1,
16588 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
16589 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
16590 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
16591 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
16592 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
16593 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
16594 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
16595 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
16597 intext2|intextii|INTERACTIVE modified owl 1251,
16599 cols#80, lines#24, xmc#0,
16600 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
16601 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16602 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
16603 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
16604 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
16605 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
16606 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
16607 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
16608 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
16609 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
16610 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
16613 #### Kimtron (abm, kt)
16615 # Kimtron seems to be history, but as March 1998 these people are still
16616 # offering repair services for Kimtron equipment:
16618 # Com/Pair Monitor Service
16619 # 1105 N. Cliff Ave.
16620 # Sioux Falls, South Dakota 57103
16622 # WATS voice: 1-800/398-4946
16623 # POTS fax: +1 605/338-8709
16624 # POTS voice: +1 605/338-9650
16625 # Email: <compair@sd.cybernex.net>
16626 # Internet/Web: <http://www.com-pair.com>
16628 # Kimtron entries include (undocumented) codes for: enter dim mode,
16629 # enter bold mode, enter reverse mode, turn off all attributes.
16632 # Kimtron ABM 85 added by Dual Systems
16633 # (abm85: removed duplicated ":kd=^J:" -- esr)
16634 abm85|Kimtron ABM 85,
16635 OTbs, am, bw, msgr,
16636 cols#80, it#8, lines#24, xmc#1,
16637 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
16638 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16639 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
16640 if=/usr/share/tabset/stdcrt, il1=\EE,
16641 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
16642 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
16643 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
16644 # Kimtron ABM 85H added by Dual Systems.
16645 # Some notes about the abm85h entries:
16646 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
16647 # firmware revs prior to SP51
16648 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
16649 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
16650 # in some places and NOT software settable i.e., <is2> can't fix it)
16651 # 3) In 85h mode, the arrow keys and special functions transmit when
16652 # the terminal is in dup-edit, and work only locally in local-edit.
16653 # Vi won't swallow `del char' for instance, but <smcup> turns on
16654 # dup-edit anyway so that the arrow keys will work right. If the
16655 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
16656 # <is2>. Note that 920E mode does not have software commands to toggle
16657 # between dup and local edit, so you get whatever was set last on the
16659 # 4) <flash> attribute is nice, but seems too slow to work correctly
16661 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
16662 # are selected, the <xmc@> entry should be removed.
16663 # 6) auto new-line should be on (selectable from setup mode only)
16665 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
16666 abm85h|Kimtron ABM 85H native mode,
16669 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
16671 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
16673 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
16675 abm85e|Kimtron ABM 85H in 920E mode,
16677 bel=^G, dim=\E), flash@,
16678 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
16680 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16681 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
16684 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
16686 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16687 # From: <malman@bbn-vax.arpa>
16688 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
16689 kt7|kimtron model kt-7,
16691 cols#80, it#8, lines#24,
16692 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
16693 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16694 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
16695 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
16696 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
16697 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
16698 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16699 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16700 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
16701 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
16702 # other kt7 entry and the adjacent key capabilities). Removed EE which is
16703 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
16704 # but we can't figure out what.
16705 kt7ix|kimtron model kt-7 or 70 in IX mode,
16707 cols#80, it#8, lines#25,
16708 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
16709 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
16710 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16711 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
16712 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
16713 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
16714 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
16715 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16716 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16717 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
16718 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
16719 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
16721 #### Microdata/MDIS
16723 # This was a line of terminals made by McDonnell-Douglas Information Systems.
16724 # These entries come direct from MDIS documentation. I have edited them only
16725 # to move primary names of the form p[0-9] * to aliases, and to comment out
16726 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
16727 # also removed the change history; the last version indicates this is
16728 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
16731 # McDonnell Information Systems Terminal Family History
16732 # =========================================
16734 # Prism-1, Prism-2 and P99:
16735 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
16737 # Prism-4 and Prism-5:
16738 # Slightly less ancient range of Microdata terminals. Follow-on from
16739 # Prism-2, but with many enhancements. P5 has eight display pages.
16742 # A special terminal for use with library systems, primarily in Germany.
16743 # Limited numbers. Similar functionality to P5 (except attributes?).
16745 # Prism-7, Prism-8 and Prism-9:
16746 # More recent range of MDIS terminals, in which P7 and P8
16747 # replace the P4 & P5, with added functionality, and P9 is the flagship.
16748 # The P9 has two emulation modes - P8 and ANSI - and includes a
16749 # large number of the DEC VT220 control sequences. Both
16750 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
16752 # Prism-12 and Prism-14:
16753 # Latest range, functionally very similar to the P9. The P14 has a
16754 # black-on-white overscanning screen.
16756 # The terminfo definitions given here are:
16758 # p2 - Prism-2 (or Prism-1 or P99).
16760 # p4 - Prism-4 (and older P7s & P8s).
16761 # p5 - Prism-5 (or Prism-6).
16764 # p8 - Prism-8 (in national or multinational mode).
16765 # p8-w - 132 column version of p8.
16766 # p9 - Prism-9 in ANSI mode.
16767 # p9-w - 132 column version of p9.
16768 # p9-8 - Prism-9 in Prism-8 emulation mode.
16769 # p9-8-w - As p9-8, but with 132 columns.
16771 # p12 - Prism-12 in ANSI mode.
16772 # p12-w - 132 column version of p12.
16773 # p12-m - Prism-12 in MDC emulation mode.
16774 # p12-m-w - As p12-m, but with 132 columns.
16775 # p14 - Prism-14 in ANSI mode.
16776 # p14-w - 132 column version of p14.
16777 # p14-m - Prism-14 in MDC emulation mode.
16778 # p14-m-w - As p14-m, but with 132 columns.
16783 # Includes Prism-1 and basic P99 without SP or MP loaded.
16784 # The simplest form of Prism-type terminal.
16785 # Basic cursor movement and clearing operations only.
16786 # No video attributes.
16788 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16789 # value up, followed by backspace.
16791 prism2|MDC Prism-2,
16794 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16795 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16796 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16797 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
16798 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16799 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16800 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
16805 # Includes early versions of P7 & P8.
16806 # Basic family definition for most Prisms (except P2 and P9 ANSI).
16808 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16809 # value up, followed by backspace.
16810 # Cursor key definitions removed because they interfere with vi and csh keys.
16812 prism4|p4|P4|MDC Prism-4,
16813 am, bw, hs, mc5i, msgr,
16814 cols#80, lines#24, wsl#72, xmc#1,
16815 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
16816 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16817 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16818 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16819 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
16820 fsl=^]\345, home=^A,
16821 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16822 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16823 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
16824 rev=^CD, rmso=^C\s, rmul=^C\s,
16825 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
16826 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
16827 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
16828 vpa=\013%p1%{32}%+%c,
16833 # Same definition as p4. Includes Prism-6 (not tested!).
16834 # Does not use any multi-page features.
16836 prism5|p5|P5|MDC Prism-5,
16842 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
16844 # Use p4 for very early models of P7.
16845 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16847 prism7|p7|P7|MDC Prism-7,
16848 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
16853 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
16854 # Supports national and multinational character sets.
16856 # Alternate char set operations only work in multinational mode.
16857 # Use p4 for very early models of P8.
16858 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16859 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16861 prism8|p8|P8|MDC Prism-8,
16862 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
16863 vpa=\E[%i%p1%dd, use=p4,
16865 # p8-w: Prism-8 in 132 column mode
16866 # --------------------------------
16868 # 'Wide' version of p8.
16870 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16872 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
16874 is2=\E[<12h\E[<14h, use=p8,
16876 # p9: Prism-9 in ANSI mode
16877 # -------------------------
16879 # The "flagship" model of this generation of terminals.
16880 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
16882 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
16883 # Fixes to deal with terminal firmware bugs:
16884 # . 'ri' uses insert-line since rev index doesn't always
16885 # . 'sgr0' has extra '0' since esc[m fails
16886 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
16887 # Not covered in the current definition:
16889 # . Programming Fn keys
16890 # . Graphic characters (defaults correctly to vt100)
16891 # . Padding values (sets xon)
16892 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16894 prism9|p9|P9|MDC Prism-9 in ANSII mode,
16895 am, bw, hs, msgr, xenl, xon,
16896 cols#80, it#8, lines#24, vt#3, wsl#72,
16897 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
16898 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
16899 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16900 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16901 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16902 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
16903 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
16904 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16905 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
16906 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
16907 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
16908 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
16909 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
16910 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16911 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
16912 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
16913 rmso=\E[27m, rmul=\E[24m,
16914 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
16917 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
16918 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16919 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16920 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16923 # p9-w: Prism-9 in 132 column mode
16924 # --------------------------------
16926 # 'Wide' version of p9.
16928 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16930 is2=\E[&p\E[<12l\E F\E[<14h,
16931 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16933 # p9-8: Prism-9 in P8 mode
16934 # ------------------------
16936 # P9 terminal in P8 emulation mode.
16937 # Similar to p8 definition.
16938 # Insertion and deletion operations possible.
16940 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16941 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16942 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16944 # p9-8-w: Prism-9 in P8 and 132 column modes
16945 # ------------------------------------------
16947 # P9 terminal in P8 emulation mode and 132 column mode.
16949 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16950 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16951 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16953 # p12: Prism-12 in ANSI mode
16954 # ---------------------------
16956 # See p9 definition.
16958 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16961 # p12-w: Prism-12 in 132 column mode
16962 # ----------------------------------
16964 # 'Wide' version of p12.
16966 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
16969 # p12-m: Prism-12 in MDC emulation mode
16970 # -------------------------------------
16972 # P12 terminal in MDC emulation mode.
16973 # Similar to p8 definition.
16974 # Insertion and deletion operations possible.
16976 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
16979 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
16980 # -------------------------------------------------------
16982 # P12 terminal in MDC emulation mode and 132 column mode.
16984 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
16987 # p14: Prism-14 in ANSII mode
16988 # ---------------------------
16990 # See p9 definition.
16992 prism14|p14|P14|MDC Prism-14 in ANSII mode,
16995 # p14-w: Prism-14 in 132 column mode
16996 # ----------------------------------
16998 # 'Wide' version of p14.
17000 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17003 # p14-m: Prism-14 in MDC emulation mode
17004 # -------------------------------------
17006 # P14 terminal in MDC emulation mode.
17007 # Similar to p8 definition.
17008 # Insertion and deletion operations possible.
17010 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17013 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17014 # -------------------------------------------------------
17016 # P14 terminal in MDC emulation mode and 132 column mode.
17018 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17021 # End of McDonnell Information Systems Prism definitions
17023 # These things were popular in the Pick database community at one time
17024 # From: George Land <georgeland@aol.com> 24 Sep 1996
17025 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17027 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17028 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
17029 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17030 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
17031 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17032 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17033 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17034 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17035 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17036 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
17037 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17040 #### Microterm (act, mime)
17042 # The mime1 entries refer to the Microterm Mime I or Mime II.
17043 # The default mime is assumed to be in enhanced act iv mode.
17046 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17047 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17048 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17049 # since Sytek insists ^S means xoff.
17050 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17051 act4|microterm|microterm act iv,
17054 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
17055 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17056 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17057 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17058 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
17060 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17061 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17062 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17063 act5|microterm5|microterm act v,
17064 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17066 # Mimes using brightness for standout. Half bright is really dim unless
17067 # you turn up the brightness so far that lines show up on the screen.
17068 mime-fb|full bright mime1,
17069 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17070 mime-hb|half bright mime1,
17071 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17072 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17073 # the more plausible ":do=^J:" -- esr)
17074 # uc was at one time disabled to get around a curses bug, be wary of it
17075 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17077 cols#80, it#8, lines#24, vt#9,
17078 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
17079 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17080 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17081 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17082 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17083 # These termcaps (for mime2a) put the terminal in low intensity mode
17084 # since high intensity mode is so obnoxious.
17085 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17088 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17089 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17090 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17091 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
17092 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17093 smir=\EE, smso=\E\:, smul=\E6,
17094 # This is the preferred mode (but ^X can't be used as a kill character)
17095 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17097 cols#80, it#8, lines#24,
17098 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17099 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17100 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17101 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
17102 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17103 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17104 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17105 mime3a|mime1 emulating 3a,
17107 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17108 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17110 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17112 # Wed Mar 9 18:53:21 1983
17113 # We run our terminals at 2400 baud, so there might be some timing problems at
17114 # higher speeds. The major improvements in this model are the terminal now
17115 # scrolls down and insert mode works without redrawing the rest of the line
17116 # to the right of the cursor. This is done with a bit of a kludge using the
17117 # exit graphics mode to get out of insert, but it does not appear to hurt
17118 # anything when using vi at least. If you have some users using act4s with
17119 # programs that use curses and graphics mode this could be a problem.
17120 mime314|mm314|mime 314,
17123 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17124 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17125 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17126 # Microterm mime 340 from University of Wisconsin
17127 mm340|mime340|mime 340,
17129 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17130 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17131 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17132 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
17133 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
17134 # This came from University of Wisconsin marked "astro termcap for jooss".
17135 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17136 # also added <rmam>/<smam> based on the init string -- esr)
17137 mt4520-rv|micro-term 4520 reverse video,
17138 am, hs, msgr, xenl, xon,
17139 cols#80, it#8, lines#24, wsl#80,
17140 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
17141 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17142 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17143 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17144 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17145 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17146 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17147 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17148 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17150 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17151 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17152 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17153 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17154 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17155 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17156 tbc=\E[g, tsl=\E[25;1H,
17158 # Fri Aug 5 08:11:57 1983
17159 # This entry works for the ergo 4000 with the following setups:
17160 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17163 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17164 # Be advised that very early versions DO NOT WORK RIGHT !!
17165 # Microterm does have a ROM exchange program- use it or lose big
17166 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17167 ergo4000|microterm ergo 4000,
17170 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
17171 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17172 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17173 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17174 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17175 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17176 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17177 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17178 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17179 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17184 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17185 # For what happened to that group, see the ADDS section.
17187 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17190 # The following vendor-supplied termcaps were captured from the Boundless
17191 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17192 # identical, except for case, to lower-case ones. I also uncommented the acsc
17195 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17196 # DEC vt200/300 with color capabilities added.
17197 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17198 colors#8, pairs#64,
17199 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17201 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17202 # DEC vt200/300 with color capabilities added.
17203 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17204 colors#8, pairs#64,
17205 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17206 use=ncr260vt300wan,
17207 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17208 # DEC vt200/300 with color capabilities added.
17209 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17210 colors#8, pairs#64,
17211 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17213 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
17214 # DEC vt200/300 with color capabilities added.
17215 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17216 colors#8, pairs#64,
17217 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17218 use=ncr260vt300wpp,
17219 # This definition for ViewPoint supports several attributes. This means
17220 # that it has magic cookies (extra spaces where the attributes begin).
17221 # Some applications do not function well with magic cookies. The System
17222 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17223 # If supporting various attributes is not vital, 'xmc#1' and the extra
17224 # attributes can be removed.
17225 # Mapping to ASCII character set ('acsc' capability) can also be
17226 # restored if needed.
17227 ncr260vppp|NCR 2900_260 viewpoint,
17228 am, bw, hs, km, mc5i, mir, msgr, xon,
17229 cols#80, lines#24, nlab#32, xmc#1,
17230 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17231 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17232 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17233 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17234 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17235 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
17236 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17237 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17239 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17240 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
17241 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
17242 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17243 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17244 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
17245 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
17246 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
17247 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
17248 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
17249 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17250 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
17251 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
17252 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17253 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17255 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
17256 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
17257 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
17259 cup=\Ea%i%p1%dR%p2%dC$<30>,
17260 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17262 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17265 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
17266 am, hs, mir, msgr, xenl, xon,
17267 cols#80, lines#24, nlab#32,
17268 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17269 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17270 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17271 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
17272 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17273 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17274 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17275 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17276 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17277 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
17278 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
17279 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
17280 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
17282 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17284 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17285 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
17286 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
17287 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
17288 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
17289 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17292 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17293 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17294 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
17295 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
17296 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
17297 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
17299 cup=\E[%i%p1%d;%p2%dH$<30>,
17300 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17302 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17305 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
17306 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17308 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17309 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17310 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
17311 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
17312 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17314 smkx=\E=, use=ncr260vt100an,
17315 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
17317 cup=\E[%i%p1%d;%p2%dH$<30>,
17318 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17320 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17323 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
17324 am, hs, mir, msgr, xenl, xon,
17325 cols#80, lines#24, nlab#32,
17326 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17327 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17328 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17329 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17330 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17331 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17332 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17333 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17334 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17335 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17336 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17337 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17338 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17339 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17341 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17342 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17343 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17344 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17345 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
17346 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
17347 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
17348 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
17349 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
17350 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
17351 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
17352 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17353 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
17354 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
17355 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17358 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17359 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17360 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17361 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17362 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17364 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
17366 cup=\E[%i%p1%d;%p2%dH$<30>,
17367 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
17368 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
17369 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
17370 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17371 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17372 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17373 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17375 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
17377 cup=\E[%i%p1%d;%p2%dH$<30>,
17378 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17380 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17383 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
17384 am, hs, mir, msgr, xenl, xon,
17385 cols#80, lines#24, nlab#32,
17386 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17387 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17388 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17389 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17390 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17391 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17392 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17393 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17394 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17395 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17396 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17397 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17398 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17399 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17401 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17402 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17403 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17404 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17405 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
17406 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
17407 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
17408 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
17409 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17410 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17411 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
17412 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
17413 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
17415 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17418 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17419 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17420 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17421 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17422 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17424 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
17426 cup=\E[%i%p1%d;%p2%dH$<30>,
17427 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17429 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17432 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
17433 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17434 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17435 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17436 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17438 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
17440 cup=\E[%i%p1%d;%p2%dH$<30>,
17441 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17443 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17446 # This terminfo file contains color capabilities for the Wyse325 emulation of
17447 # the NCR 2900/260C color terminal. Because of the structure of the command
17448 # (escape sequence) used to set color attributes, one of the fore/background
17449 # colors must be preset to a given value. I have set the background color to
17450 # black. The user can change this setup by altering the last section of the
17451 # 'setf' definition. The escape sequence to set color attributes is
17452 # ESC d y <foreground_color> <background_color> 1
17453 # In addition, the background color can be changed through the desk accessories.
17454 # The capablitiy 'op' sets colors to green on black (default combination).
17456 # NOTE: The NCR Unix System Administrator's Shell will not function properly
17457 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
17458 # capability and recompile if you wish to have it included.
17460 ncr260wy325pp|NCR 2900_260 wyse 325,
17461 am, bw, hs, km, mc5i, mir, msgr, xon,
17462 colors#16, cols#80, lines#24, ncv#33, nlab#32,
17463 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17464 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
17465 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17466 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17467 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17468 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
17469 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17470 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17472 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17473 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
17474 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
17475 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
17476 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
17477 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
17478 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
17479 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
17480 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17481 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
17482 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17483 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17484 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17485 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17486 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17489 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17490 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17491 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
17492 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
17493 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
17494 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
17495 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
17496 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17498 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
17500 cup=\Ea%i%p1%dR%p2%dC$<30>,
17501 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17503 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17506 # This definition for Wyse 350 supports several attributes. This means
17507 # that it has magic cookies (extra spaces where the attributes begin).
17508 # Some applications do not function well with magic cookies. The System
17509 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17510 # If supporting various attributes is not vital, 'xmc#1' and the extra
17511 # attributes can be removed.
17512 # Mapping to ASCII character set ('acsc' capability) can also be
17513 # restored if needed.
17514 # In addition, color capabilities have been added to this file. The drawback,
17515 # however, is that the background color has to be black. The foreground colors
17516 # are numbered 0 through 15.
17518 # NOTE: The NCR Unix System Administrator's Shell does not function properly
17519 # with the 'pairs' capability defined as below. If you wish to
17520 # have it included, Un-comment it and recompile (using 'tic').
17522 ncr260wy350pp|NCR 2900_260 wyse 350,
17523 am, bw, hs, km, mc5i, mir, msgr, xon,
17524 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
17525 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17526 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
17527 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17528 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
17529 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17530 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
17531 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17532 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17534 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17535 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
17536 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17537 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17538 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17539 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17540 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17541 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17542 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17543 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17544 mc0=\EP$<10>, mc4=^T, mc5=^R,
17545 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
17546 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17547 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17548 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17551 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17552 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17553 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
17554 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
17555 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
17556 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
17557 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
17558 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17560 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
17562 cup=\Ea%i%p1%dR%p2%dC$<30>,
17563 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17565 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17568 # This definition for Wyse 50+ supports several attributes. This means
17569 # that it has magic cookies (extra spaces where the attributes begin).
17570 # Some applications do not function well with magic cookies. The System
17571 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17572 # If supporting various attributes is not vital, 'xmc#1' and the extra
17573 # attributes can be removed.
17574 # Mapping to ASCII character set ('acsc' capability) can also be
17575 # restored if needed.
17576 # (ncr260wy50+pp: originally contained commented-out
17577 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
17578 ncr260wy50+pp|NCR 2900_260 wyse 50+,
17579 am, bw, hs, km, mc5i, mir, msgr, xon,
17580 cols#80, lines#24, nlab#32, xmc#1,
17581 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
17582 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
17583 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17584 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
17585 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17586 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
17587 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
17589 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17590 \Ee4\Ex@\E`9\Ee7$<100>,
17591 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17592 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
17593 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17594 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17595 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17596 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17597 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17598 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17599 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17600 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17601 mc0=\EP$<10>, mc4=^T, mc5=^R,
17602 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17603 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17604 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17605 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17606 \Ee4\Ex@\E`9\Ee7$<100>,
17607 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
17608 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
17609 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
17611 cup=\Ea%i%p1%dR%p2%dC$<30>,
17612 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17613 \Ee4\Ex@\E`9\Ee7$<200>,
17614 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17615 \Ee4\Ex@\E`9\Ee7$<200>,
17617 ncr260wy60pp|NCR 2900_260 wyse 60,
17618 am, bw, hs, km, mc5i, mir, msgr, xon,
17619 cols#80, lines#24, nlab#32,
17620 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17621 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
17622 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17623 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17624 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17625 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
17626 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
17628 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17629 \Ee4\Ex@\E`9\Ee7$<100>,
17630 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17631 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
17632 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17633 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17634 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
17635 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
17636 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
17637 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
17638 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
17639 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17640 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17641 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
17642 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17643 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17644 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17645 \Ee4\Ex@\E`9\Ee7$<100>,
17646 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
17647 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
17649 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
17651 cup=\Ea%i%p1%dR%p2%dC$<30>,
17652 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17653 \Ee4\Ex@\E`9\Ee7$<100>,
17654 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17655 \Ee4\Ex@\E`9\Ee7$<100>,
17657 ncr160vppp|NCR 2900_160 viewpoint,
17659 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
17661 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
17663 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
17665 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
17666 use=ncr260vt100wan,
17667 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
17668 use=ncr260vt100wpp,
17669 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
17671 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
17673 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
17674 use=ncr260vt200wan,
17675 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
17676 use=ncr260vt200wpp,
17677 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
17679 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
17681 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
17682 use=ncr260vt300wan,
17683 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
17684 use=ncr260vt300wpp,
17685 ncr160wy50+pp|NCR 2900_160 wyse 50+,
17687 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
17688 use=ncr260wy50+wpp,
17689 ncr160wy60pp|NCR 2900_160 wyse 60,
17691 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
17693 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
17694 am, hs, mc5i, mir, msgr, xon,
17695 cols#80, it#8, lines#24, nlab#32,
17696 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
17697 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
17698 clear=\E[2J\E[1;1H$<300>, cr=^M,
17699 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
17700 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
17701 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
17702 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
17703 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
17704 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
17705 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
17706 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
17707 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
17709 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
17710 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
17711 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
17712 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
17713 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
17714 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
17715 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
17716 B\E)0\E%/0n\E[P\031$<200>,
17718 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17719 %;m%?%p9%t\016%e\017%;$<100>,
17720 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
17721 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
17723 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
17725 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
17726 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
17727 \E)0\E%/0n\E[P\031$<200>,
17730 # Vendor-supplied NCR termcaps end here
17732 # NCR7900 DIP switches:
17736 # 5 - Parity (Odd/Even)
17737 # 6 - Don't Send or Do Send Spaces
17738 # 7 - Parity Enable
17739 # 8 - Stop Bits (One/Two)
17742 # 1 - Upper/Lower Shift
17743 # 2 - Typewriter Shift
17744 # 3 - Half Duplex / Full Duplex
17745 # 4 - Light/Dark Background
17746 # 5-6 - Carriage Return Without / With Line Feed
17747 # 7 - Extended Mode
17748 # 8 - Suppress Keyboard Display
17751 # 1 - End of line entry disabled/enabled
17752 # 2 - Conversational mode / (Local?) Mode
17753 # 3 - Control characters displayed / not displayed
17754 # 4 - (2-wire?) / 4-wire communications
17755 # 5 - RTS on and off for each character
17756 # 6 - (50Hz?) / 60 Hz
17757 # 7 - Exit after level zero diagnostics
17758 # 8 - RS-232 interface
17761 # 1 - Reverse Channel (yes / no)
17762 # 2 - Manual answer (no / yes)
17763 # 3-4 - Cursor appearance
17764 # 5 - Communication Rate
17765 # 6 - Enable / Disable EXT turnoff
17766 # 7 - Enable / Disable CR turnoff
17767 # 8 - Enable / Disable backspace
17769 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
17770 # reverse, blink, dim, and underline) the appropriate number of bits (by
17771 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
17772 # '@' is (effectively) "or"ed with each attribute to generate the proper third
17773 # character in the <ESC>0 sequence. The <sgr> string implements the following
17776 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
17777 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
17779 # Where: P1 <==> Standout attribute parameter
17780 # P2 <==> Underline attribute parameter
17781 # P3 <==> Reverse attribute parameter
17782 # P4 <==> Blink attribute parameter
17783 # P5 <==> Dim attribute parameter
17784 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
17785 ncr7900i|ncr7900|ncr 7900 model 1,
17787 cols#80, lines#24, xmc#1,
17788 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
17789 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
17790 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
17791 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
17793 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17795 sgr0=\E0@, smso=\E0Q, smul=\E0`,
17796 ncr7900iv|ncr 7900 model 4,
17799 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
17800 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
17801 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
17802 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
17803 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
17804 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
17805 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
17806 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
17807 # The user can enter a CTRL-B to get out of this locked state.
17808 # In <hpa>, we want to output the character given by the formula:
17809 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
17810 ncr7901|ncr 7901 model,
17813 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
17814 cub1=^H, cud1=^J, cuf1=^F,
17815 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
17817 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
17818 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
17819 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
17820 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17822 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
17823 vpa=\013%p1%{64}%+%c,
17825 # Newbury Data Recording Limited (Newbury Data)
17827 # Have been manufacturing and reselling various peripherals for a long time
17828 # They don't make terminals anymore, but are still in business (in 2007).
17829 # Their e-mail address is at ndsales@newburydata.co.uk
17830 # and their post address is:
17832 # Newbury Data Recording Ltd,
17833 # Premier Park, Road One,
17834 # Winsford, Cheshire, CW7 3PT
17836 # Their technical support is still good, they sent me for free a printed copy
17837 # of the 9500 user manual and I got it just 1 week after I first contacted them
17841 # Manufactured in the early/mid eighties, behaves almost the same as a
17842 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
17843 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
17844 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
17845 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
17846 # recognized: if you type in "ESC !", the next (third) character is not
17847 # echoed, showing that the terminal was actually waiting for a parameter!
17848 ndr9500|nd9500|Newbury Data 9500,
17849 am, bw, hs, mc5i, mir, msgr, ul, xon,
17850 cols#80, lines#24, wsl#79,
17851 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
17852 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
17853 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17854 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
17855 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
17856 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
17857 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
17858 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
17859 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17860 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
17861 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
17862 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17863 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17864 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
17865 pfloc=\E|%{48}%p1%+%c2%p2\031,
17866 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
17867 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
17868 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
17869 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
17870 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
17872 ndr9500-nl|NDR 9500 with no status line,
17875 dsl@, fsl@, tsl@, use=ndr9500,
17877 ndr9500-25|NDR 9500 with 25th line enabled,
17878 lines#25, use=ndr9500,
17880 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
17881 lines#25, use=ndr9500-nl,
17883 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
17886 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
17887 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
17888 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
17889 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
17891 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
17892 lines#25, use=ndr9500-mc,
17894 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
17897 dsl@, fsl@, tsl@, use=ndr9500-mc,
17899 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
17900 lines#25, use=ndr9500-mc-nl,
17902 #### Perkin-Elmer (Owl)
17904 # These are official terminfo entries from within Perkin-Elmer.
17907 bantam|pe550|pe6100|perkin elmer 550,
17910 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17911 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17912 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
17913 fox|pe1100|perkin elmer 1100,
17916 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
17917 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17918 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
17919 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
17920 owl|pe1200|perkin elmer 1200,
17923 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
17924 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17925 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
17926 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
17927 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
17928 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
17929 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
17930 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
17931 pe1251|pe6300|pe6312|perkin elmer 1251,
17933 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
17934 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
17935 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17936 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
17937 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
17938 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
17939 # (pe7000m: this had
17940 # rmul=\E!\0, smul=\E!\040,
17941 # which is probably wrong, it collides with kf0
17942 pe7000m|perkin elmer 7000 series monochrome monitor,
17945 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
17946 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
17947 ed=\EJ, el=\EI, home=\EH, ind=^J,
17948 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
17949 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
17950 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
17951 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
17953 pe7000c|perkin elmer 7000 series colour monitor,
17954 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
17955 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
17959 # Sperry Univac has merged with Burroughs to form Unisys.
17962 # This entry is for the Sperry UTS30 terminal running the TTY
17963 # utility under control of CP/M Plus 1R1. The functionality
17964 # provided is comparable to the DEC vt100.
17965 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
17966 uts30|sperry uts30 with cp/m@1R1,
17968 cols#80, lines#24, wsl#40,
17969 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17970 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
17971 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
17972 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17973 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17974 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
17975 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
17976 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
17977 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
17978 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
17979 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
17980 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
17981 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17982 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
17983 smul=\E[4m, tsl=\E], uc=\EPB,
17987 # Tandem builds these things for use with its line of fault-tolerant
17988 # transaction-processing computers. They aren't generally available
17989 # on the merchant market, and so are fairly uncommon.
17992 tandem6510|adm3a repackaged by Tandem,
17995 # A funny series of terminal that TANDEM uses. The actual model numbers
17996 # have a fourth digit after 653 that designates minor variants. These are
17997 # natively block-mode and rather ugly, but they have a character mode which
17998 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
17999 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18000 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18001 tandem653|t653x|Tandem 653x multipage terminal,
18002 OTbs, am, da, db, hs,
18003 cols#80, lines#24, wsl#64, xmc#1,
18004 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
18005 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18006 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18007 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18009 #### Tandy/Radio Shack
18011 # Tandy has a line of VDTs distinct from its microcomputers.
18014 dmterm|deskmate terminal,
18017 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
18018 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18019 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18020 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18021 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18022 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18023 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18024 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18026 dt100|dt-100|Tandy DT-100 terminal,
18028 cols#80, lines#24, xmc#1,
18029 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18030 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
18031 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18032 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18033 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18034 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18035 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18036 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18037 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18038 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18039 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18040 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18041 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18042 cols#132, use=dt100,
18043 dt110|Tandy DT-110 emulating ansi,
18046 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18047 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
18048 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18049 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18050 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18051 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
18052 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18053 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18054 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18055 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18056 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18057 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18058 smacs=^N, smso=\E[7m, smul=\E[4m,
18059 pt210|TRS-80 PT-210 printing terminal,
18062 bel=^G, cr=^M, cud1=^J, ind=^J,
18064 #### Tektronix (tek)
18066 # Tektronix tubes are graphics terminals. Most of them use modified
18067 # oscilloscope technology incorporating a long-persistence green phosphor,
18068 # and support vector graphics on a main screen with an attached "dialogue
18069 # area" for interactive text.
18072 tek|tek4012|tektronix 4012,
18075 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
18076 ff=\014$<1000>, is2=\E^O,
18077 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18078 tek4013|tektronix 4013,
18079 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18080 tek4014|tektronix 4014,
18082 is2=\E\017\E9, use=tek4012,
18083 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18084 tek4015|tektronix 4015,
18085 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18086 tek4014-sm|tektronix 4014 in small font,
18087 cols#121, lines#58,
18088 is2=\E\017\E\:, use=tek4014,
18089 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18090 tek4015-sm|tektronix 4015 in small font,
18091 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18092 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18094 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18095 # how to set it for you.
18097 # It's got the Magic Cookie problem around stand-out mode. If you can't
18098 # live with Magic Cookie, remove the :so: and :se: fields and do without
18099 # reverse video. If you like reverse video stand-out mode but don't want
18100 # it to flash, change the letter 'H' to 'P' in the :so: field.
18101 tek4023|tektronix 4023,
18103 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18104 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
18105 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18106 rmso=^_@, smso=^_P,
18107 # It is recommended that you run the 4025 at 4800 baud or less;
18108 # various bugs in the terminal appear at 9600. It wedges at the
18109 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18110 # on keyboard don't work. You have to hit BREAK twice to get
18111 # one break at any speed - this is a documented feature.
18112 # Can't use cursor motion because it's memory relative, and
18113 # because it only works in the workspace, not the monitor.
18114 # Same for home. Likewise, standout only works in the workspace.
18116 # <el> was commented out since vi and rogue seem to work better
18117 # simulating it with lots of spaces!
18119 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18120 # and didn't seem necessary.
18122 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18124 cols#80, it#8, lines#34, lm#0,
18125 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
18126 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18127 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18128 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18129 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18130 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18131 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18133 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18134 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18136 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18137 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18138 tek4025-17|tek 4025 17 line window,
18139 lines#17, use=tek4025,
18140 tek4025-17-ws|tek 4025 17 line window in workspace,
18141 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18142 \r\037wor\s17\r\037mon\s17\r,
18143 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18144 smso=\037att e\r, use=tek4025-17,
18145 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18146 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18147 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18149 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18150 # The following status modes are assumed for normal operation (replace the
18151 # initial "!" by whatever the current command character is):
18152 # !COM 29 # NOTE: changes command character to GS (^])
18158 # ^]STO 9 17 25 33 41 49 57 65 73
18159 # Other modes may be set according to communication requirements.
18160 # If the command character is inadvertently changed, termcap can't restore it.
18161 # Insert-character cannot be made to work on both top and bottom rows.
18162 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18163 # There also seems to be a problem with vertical motion, perhaps involving
18164 # delete/insert-line, following a typed carriage return. This terminal sucks.
18165 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18166 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18167 # work any more. -- esr)
18168 tek4025a|Tektronix 4025A,
18169 OTbs, OTpt, am, bw, da, db, xon,
18170 cols#80, it#8, lines#34,
18171 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18172 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18173 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
18174 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18175 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18176 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18177 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
18178 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18179 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18180 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18181 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18183 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18184 # Here's the command file that I use to get rogue to work on the 4025.
18185 # It should work with any program using the old curses (e.g. it better
18186 # not try to scroll, or cursor addressing won't work. Also, you can't
18188 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18189 tek4025-cr|tek 4025 for curses and rogue,
18191 cols#80, it#8, lines#33,
18192 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
18193 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
18194 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18195 rmcup=\037wor 0, smcup=\037wor 33h,
18196 # next two lines commented out since curses only allows 128 chars, sigh.
18197 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18198 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18199 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18200 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18202 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18203 tek4105|tektronix 4105,
18204 OTbs, am, mir, msgr, ul, xenl, xt,
18205 cols#79, it#8, lines#29,
18206 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18207 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18208 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18209 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18210 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18211 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18212 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18213 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18214 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18215 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18216 smul=\E[=5;<2m, tbc=\E[1g,
18218 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18219 tek4105-30|4015 emulating 30 line vt100,
18220 am, mir, msgr, xenl, xon,
18221 cols#80, it#8, lines#30, vt#3,
18222 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18223 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18224 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18225 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18226 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18227 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18228 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18229 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
18230 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18231 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18232 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18233 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18234 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18235 %;m%?%p9%t\016%e\017%;$<2>,
18236 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18237 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18240 # Tektronix 4105 from BRL
18241 # The following setup modes are assumed for normal operation:
18242 # CODE ansi CRLF no DABUFFER 141
18243 # DAENABLE yes DALINES 30 DAMODE replace
18244 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18245 # FLAGGING input INSERTREPLACE replace LFCR no
18246 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18247 # SELECTCHARSET G1 0 TABS -2
18248 # Other setup modes may be set for operator convenience or communication
18249 # requirements; I recommend
18250 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18251 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18252 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18253 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
18254 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18255 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
18257 # and factory color maps. After setting these modes, save them with NVSAVE. No
18258 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18259 # "IC" cannot be used in combination with "im" & "ei".
18260 # "tek4105a" is just a guess:
18261 tek4105a|Tektronix 4105,
18262 OTbs, OTpt, msgr, xon,
18263 OTkn#8, cols#80, it#8, lines#30, vt#3,
18264 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18265 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18266 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18267 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18268 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18269 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18270 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18271 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18272 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
18273 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18274 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18275 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18276 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18277 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18278 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18279 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18280 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
18281 \E[?7;8h\E[r\E[m\E>,
18282 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18283 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18286 # Tektronix 4106/4107/4109 from BRL
18287 # The following setup modes are assumed for normal operation:
18288 # CODE ansi COLUMNMODE 80 CRLF no
18289 # DABUFFER 141 DAENABLE yes DALINES 32
18290 # DAMODE replace DAVISIBILITY yes ECHO no
18291 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
18292 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
18293 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
18295 # Other setup modes may be set for operator convenience or communication
18296 # requirements; I recommend
18297 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18298 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18299 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18300 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
18301 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18302 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
18304 # and factory color maps. After setting these modes, save them with NVSAVE. No
18305 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18306 # "IC" cannot be used in combination with "im" & "ei".
18307 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
18309 cols#80, it#8, lines#32, vt#3,
18310 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18311 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18312 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18313 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18314 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18315 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18316 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18317 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18318 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
18319 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18320 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18321 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18322 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18323 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18324 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18325 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18326 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
18327 ;5l\E[?7;8h\E[r\E[m\E>,
18328 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18329 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
18331 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
18332 # 0 selects Tek mode, i.e., \E%!0
18333 # 1 selects ANSI mode
18334 # 2 selects ANSI edit-mode
18335 # 3 selects VT52 mode
18337 # One odd thing about the description (which has been unchanged since the 90s)
18338 # is that the cursor addressing is using VT52 mode, and a few others use the
18339 # VT52's non-CSI versions of ANSI, e.g., \EJ.
18340 tek4107|tek4109|tektronix terminals 4107 4109,
18341 OTbs, am, mir, msgr, ul, xenl, xt,
18342 cols#79, it#8, lines#29,
18343 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
18344 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
18345 cub1=^H, cud1=^J, cuf1=\EC,
18346 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
18347 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
18348 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18349 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
18350 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
18351 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
18352 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
18353 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
18354 smul=\E%!1\E[4m$<2>\E%!0,
18355 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
18356 # see the note attached to tek4207.
18357 tek4207-s|Tektronix 4207 with sysline but no memory,
18359 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
18360 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18361 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18362 is2=\E7\E[?6l\E[2K\E[?6h\E8,
18363 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
18365 # The 4110 series may be a wonderful graphics series, but they make the 4025
18366 # look good for screen editing. In the dialog area, you can't move the cursor
18367 # off the bottom line. Out of the dialog area, ^K moves it up, but there
18368 # is no way to scroll.
18370 # Note that there is a floppy for free from Tek that makes the
18371 # 4112 emulate the vt52 (use the vt52 termcap). There is also
18372 # an expected enhancement that will use ANSI standard sequences.
18374 # 4112 in non-dialog area pretending to scroll. It really wraps
18375 # but vi is said to work (more or less) in this mode.
18377 # 'vi' works reasonably well with this entry.
18379 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
18382 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
18383 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
18384 # The 4112 with the ANSI compatibility enhancement
18385 tek4112|tek4114|tektronix 4110 series,
18388 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
18389 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
18390 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
18391 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
18392 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18393 tek4112-nd|4112 not in dialog area,
18395 cuu1=^K, use=tek4112,
18396 tek4112-5|4112 in 5 line dialog area,
18397 lines#5, use=tek4112,
18398 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
18399 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
18400 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
18401 # previously \0410 and \0411 sequences...I don't *think* they were supposed
18402 # to be 4-digit octal -- esr)
18403 tek4113|tektronix 4113 color graphics with 5 line dialog area,
18406 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
18407 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18409 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
18410 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
18412 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
18413 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
18414 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
18415 # :vb: needs enough delay to let you see the background color being toggled.
18416 tek4113-nd|tektronix 4113 color graphics with no dialog area,
18418 cols#80, it#8, lines#34,
18419 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
18421 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18423 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
18424 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
18425 # This entry is from Tek. Inc. (Brian Biehl)
18426 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
18427 otek4115|Tektronix 4115,
18428 OTbs, am, da, db, eo,
18429 cols#80, it#8, lines#34,
18430 cbt=\E[Z, clear=\E[H\E[2J,
18431 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
18432 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18433 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
18434 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
18436 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
18437 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
18438 kbs=^H, ri=\EM, rmam=\E[?7l,
18439 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
18440 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
18441 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
18443 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
18446 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18447 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18448 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18449 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
18450 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
18451 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18452 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
18453 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
18454 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
18455 rmso=\E[m, rmul=\E[m,
18456 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
18458 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18459 vpa=\E[%p1%{1}%+%dd,
18460 # The tek4125 emulates a vt100 incorrectly - the scrolling region
18461 # command is ignored. The following entry replaces <csr> with the needed
18462 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
18463 # chokes on; and adds a lot of initialization for the tek dialog area.
18464 # Note that this entry uses all 34 lines and sets the cursor color to green.
18465 # Steve Jacobson 8/85
18466 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
18467 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
18468 tek4125|tektronix 4125,
18470 csr@, dl1=\E[1M, il1=\E[1L,
18471 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
18472 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
18474 rc@, sc@, smkx=\E=, use=vt100,
18476 # From: <jcoker@ucbic>
18477 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
18478 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
18479 # note that if jcoker wasn't confused you may be able to use this one.
18480 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
18481 tek4207|Tektronix 4207 graphics terminal with memory,
18482 am, bw, mir, msgr, ul, xenl,
18483 cols#80, it#8, lines#32,
18484 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
18485 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18486 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
18487 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
18488 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
18489 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18490 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18491 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
18492 rev=\E[7m, ri=\E[T,
18493 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
18494 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
18495 smul=\E[4m, tbc=\E[1g,
18497 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
18498 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
18499 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
18500 tek4404|tektronix 4404,
18502 cols#80, it#8, lines#32,
18503 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
18504 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
18505 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
18506 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
18507 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
18508 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
18509 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18510 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
18511 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
18512 # Some unknown person wrote:
18513 # I added the is string - straight Unix has ESC ; in the login
18514 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
18515 # mode). The is string here cleans up a few things (but not
18517 ct8500|tektronix ct8500,
18520 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
18521 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
18522 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
18523 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
18524 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
18526 # Tektronix 4205 terminal.
18528 # am is not defined because the wrap around occurs not when the char.
18529 # is placed in the 80'th column, but when we are attempting to type
18530 # the 81'st character on the line. (esr: hmm, this is like the vt100
18531 # version of xenl, perhaps am + xenl would work!)
18533 # Bold, dim, and standout are simulated by colors and thus not allowed
18534 # with colors. The tektronix color table is mapped into the RGB color
18535 # table by setf/setb. All colors are reset to factory specifications by oc.
18536 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
18537 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
18538 # interval then maps into pre-defined value.
18539 tek4205|tektronix 4205,
18541 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
18542 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18543 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
18544 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
18545 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18546 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18547 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
18548 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
18549 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
18551 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
18552 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
18553 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
18554 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
18555 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
18556 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
18557 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
18558 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
18559 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
18561 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
18562 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
18563 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
18565 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
18567 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
18568 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
18569 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18570 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18572 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18573 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18575 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
18576 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18577 smul=\E[4m, tbc=\E[1g,
18579 #### Teletype (tty)
18581 # These are the hardcopy Teletypes from before AT&T bought the company,
18582 # clattering electromechanical dinosaurs in Bakelite cases that printed on
18583 # pulpy yellow roll paper. If you remember these you go back a ways.
18584 # Teletype-branded VDTs are listed in the AT&T section.
18586 # The earliest UNIXes were designed to use these clunkers; nroff and a few
18587 # other programs still default to emitting codes for the Model 37.
18590 tty33|tty35|model 33 or 35 teletype,
18593 bel=^G, cr=^M, cud1=^J, ind=^J,
18594 tty37|model 37 teletype,
18596 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
18599 # There are known to be at least three flavors of the tty40, all seem more
18600 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
18601 # awful braindamage, such as printing a visible newline indicator after each
18602 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
18603 # braindamaged but has hope and is described here. The 40-4 is a 3270
18604 # lookalike and beyond hope. The terminal has visible bell but I don't know
18605 # it - it's null here to prevent it from showing the BL character.
18606 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
18607 # a "newline" style terminal (-crmode) vi figures all it needs is nl
18608 # to get crlf, even if <cr> is not ^M.)
18609 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
18610 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
18613 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
18614 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
18615 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
18616 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
18617 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
18618 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
18619 tty43|model 43 teletype,
18620 OTbs, am, hc, os, xon,
18622 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
18627 # You can add <is2=\E<> to put this 40-column mode, though I can't
18628 # for the life of me think why anyone would want to.
18629 scanset|sc410|sc415|Tymshare Scan Set,
18632 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
18633 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18634 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
18635 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
18636 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
18638 #### Volker-Craig (vc)
18640 # If you saw a Byte Magazine cover with a terminal on it during the early
18641 # 1980s, it was probably one of these. Carl Helmers liked them because
18642 # they could crank 19.2 and were cheap (that is, he liked them until he tried
18643 # to program one...)
18646 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
18647 # every other linefeed.
18648 vc303|vc103|vc203|volker-craig 303,
18651 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18652 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
18653 kcuu1=^N, ll=\017$<1>W,
18654 vc303a|vc403a|volker-craig 303a,
18655 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
18656 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
18657 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
18658 vc404|volker-craig 404,
18661 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18662 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18663 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
18664 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
18665 vc404-s|volker-craig 404 w/standout mode,
18666 cud1=^J, rmso=^O, smso=^N, use=vc404,
18667 # From: <wolfgang@cs.sfu.ca>
18668 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
18669 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
18672 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
18673 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
18674 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
18675 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
18676 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
18677 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
18678 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
18679 rmso=\E^_, smso=\E^Y,
18680 vc415|volker-craig 415,
18681 clear=^L, use=vc404,
18683 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
18686 #### IBM PC and clones
18689 # The pcplot IBM-PC terminal emulation program is really messed up. It is
18690 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
18691 # doesn't support scrolling regions, ignores add line commands, and ignores
18692 # delete line commands. Consequently, the resulting behavior looks like a
18693 # crude adm3a-type terminal.
18694 # Steve Jacobson 8/85
18695 pcplot|pc-plot terminal emulation program,
18697 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
18698 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
18699 # I've found that my KayPro II, running MDM730, continues to emulate an
18700 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
18701 # system the following termcap entry works well:
18702 # I have noticed a couple of minor glitches, but nothing I can't work
18703 # around. (I added two capabilities from the BRL entry -- esr)
18704 kaypro|kaypro2|kaypro II,
18707 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
18708 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
18709 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
18711 # From IBM, Thu May 5 19:35:27 1983
18712 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
18713 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
18716 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
18717 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
18719 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
18720 OTbs, am, bw, eo, hs, km, msgr, ul,
18721 cols#80, it#8, lines#24,
18722 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18724 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
18725 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18726 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18727 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
18728 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
18729 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
18730 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18731 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
18732 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
18733 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
18734 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
18735 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
18736 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18738 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18742 # Apple II firmware console first, then various 80-column cards and
18743 # terminal emulators. For two cents I'd toss all these in the UFO file
18744 # along with the 40-column apple entries.
18747 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
18748 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
18749 # function of TIC, not the firmware.
18750 # The clear key on a IIgs will do something like clear-screen,
18751 # depending on what you're in.
18752 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
18753 OTbs, am, bw, eo, msgr,
18754 cols#80, it#8, lines#24,
18755 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
18756 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18757 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
18758 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
18760 # Apple //e with 80-column card, entry from BRL
18761 # The modem interface is permitted to discard LF (maybe DC1), otherwise
18762 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
18763 # Auto-wrap does not work right due to newline scrolling delay, which also
18764 # requires that you set "stty cr2".
18765 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
18766 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
18767 # using a terminal emulation program instead of the built-in firmware.
18771 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
18772 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
18773 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
18774 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18776 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
18777 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
18778 apple2e-p|Apple //e via Pascal,
18779 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
18780 kcud1=^J, use=apple2e,
18781 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
18782 # Enable DC3/DC1 flow control with "stty ixon -ixany".
18783 apple-ae|ASCII Express,
18784 OTbs, am, bw, msgr, nxon, xon,
18785 cols#80, it#8, lines#24,
18786 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18787 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18788 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
18789 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18791 appleII|apple ii plus,
18793 cols#80, it#8, lines#24,
18794 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
18795 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
18796 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
18797 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
18799 # Originally by Gary Ford 21NOV83
18800 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
18801 apple-80|apple II with smarterm 80 col,
18804 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
18805 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
18806 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
18807 apple-soroc|apple emulating soroc 120,
18810 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18811 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
18812 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
18813 # From Peter Harrison, Computer Graphics Lab, San Francisco
18814 # ucbvax!ucsfmis!harrison .....uucp
18815 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
18816 # "These two work. If you don't have the inverse video chip for the
18817 # Apple with videx then remove the :so: and :se: fields."
18818 # (apple-videx: this used to be called DaleApple -- esr)
18819 apple-videx|Apple with videx videoterm 80 column board with inverse video,
18821 cols#80, it#8, lines#24,
18822 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
18823 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18824 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
18825 rmso=^Z2, sgr0=^Z2, smso=^Z3,
18826 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
18827 # Apple Cat ][ 212 modem, + more all
18828 # controlled by ASCII Express: Pro.
18829 # From Dave Shaver <isucs1!shaver>
18830 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
18833 acsc=, clear=^L, cuf1=^\,
18834 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18835 flash=^W35^W06, home=^Y,
18836 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
18838 apple-uterm|Ultraterm for Apple micros,
18841 acsc=, clear=^L, cuf1=^\,
18842 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18843 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
18844 # from trwrba!bwong (Bradley W. Wong):
18846 # This entry assumes that you are using an apple with the UCSD Pascal
18847 # language card. SYSTEM.MISCINFO is assumed to be the same as that
18848 # supplied with the standard apple except that screenwidth should be set
18849 # using SETUP to 80 columns. Note that the right arrow is not mapped in
18850 # this termcap entry. This is because that key, on the Apple, transmits
18851 # a ^U and would thus preempt the more useful "up" function of vi.
18854 apple80p|80-column apple with Pascal card,
18857 clear=^Y^L, cuf1=^\\:,
18858 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18861 # Apple II+ equipped with Videx 80 column card
18863 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
18864 # manually converted by D A Gwyn
18866 # DO NOT use any terminal emulation with this data base, it works directly
18867 # with the Videx card. This has been tested with vi 1200 baud and works fine.
18869 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
18870 # 1 screen, while in R2 ^U doesn't.
18871 # For inverse alternate character set add:
18872 # <smacs>=^O:<rmacs>=^N:
18873 # (apple-v: added it#8 -- esr)
18874 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
18876 cols#80, it#8, lines#24,
18877 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
18878 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
18879 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
18880 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
18881 khome=^Y, rmso=^Z2, smso=^Z3,
18882 apple-videx3|vapple|Apple II with 80 col card,
18885 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
18886 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
18887 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18888 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
18889 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
18890 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
18891 aepro|Apple II+ running ASCII Express Pro--vt52,
18894 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
18895 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18897 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
18898 apple-vm80|ap-vm80|apple with viewmax-80,
18901 clear=\014$<300/>, cuf1=^\\:,
18902 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
18903 ed=\013$<300/>, el=^], home=\031$<200/>,
18905 #### Apple Lisa & Macintosh
18908 # (lisa: changed <cvvis> to <cnorm> -- esr)
18909 lisa|apple lisa console display (black on white),
18910 OTbs, am, eo, msgr,
18911 cols#88, it#8, lines#32,
18912 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
18913 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
18914 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
18915 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
18916 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18917 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
18918 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
18919 liswb|apple lisa console display (white on black),
18920 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
18921 smso=\E[m, smul=\E[4m, use=lisa,
18923 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
18924 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
18926 # These entries assume that the 'Auto Wraparound' is enabled.
18927 # Xon-Xoff flow control should also be enabled.
18929 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
18930 # settings are in non-volatile memory and don't need to be reset upon login.
18931 # Also setting the number of columns glitches the screen annoyingly.
18932 # You can type "reset" to get them set.
18934 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
18935 OTbs, OTpt, am, xenl, xon,
18936 OTkn#4, cols#80, it#8, lines#24, vt#3,
18937 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
18938 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18939 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18940 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18941 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
18942 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
18943 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
18944 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18945 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
18946 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18948 # Lisaterm in 132 column ("wide") mode.
18949 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
18951 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
18952 # Although MacTerminal has insert/delete line, it is commented out here
18953 # since it is much faster and cleaner to use the "lock scrolling region"
18954 # method of inserting and deleting lines due to the MacTerminal implementation.
18955 # Also, the "Insert/delete ch" strings have an extra character appended to them
18956 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
18957 # supported by MacTerminal.
18958 mac|macintosh|Macintosh with MacTerminal,
18961 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
18962 # Lisaterm in 132 column ("wide") mode.
18963 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
18966 #### Radio Shack/Tandy
18969 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
18970 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
18971 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
18972 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
18974 cols#80, it#8, lines#24,
18975 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
18976 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
18977 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
18978 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
18979 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
18980 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
18981 # (trs2: removed obsolete ":nl=^_:" -- esr)
18982 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
18984 cols#80, it#8, lines#24,
18985 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
18986 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
18987 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
18988 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
18989 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
18990 # (This had extension capabilities
18991 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
18992 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
18993 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
18994 trs16|trs-80 model 16 console,
18996 cols#80, it#8, lines#24,
18997 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
18998 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18999 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19000 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19001 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19002 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19003 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19004 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19005 smacs=\ERG, smso=\ERD,
19007 #### Commodore Business Machines
19009 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19010 # after years of shaky engineering and egregious mismanagement. Made one
19011 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19012 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19013 # ever (most units sold); they can still be found gathering dust in closets
19017 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19018 # Added a few more entries, converted caret-type control sequence (^x) entries
19019 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19020 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19022 # :as:, :ae: Support for alternate character sets.
19023 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19024 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19025 # This one appears to fix a problem I always had with a line ending
19026 # at 'width+1' (I think) followed by a blank line in vi. The blank
19027 # line tended to disappear and reappear depending on how the screen
19028 # was refreshed. Note that this is probably needed only if you use
19029 # something like a Dnet Fterm with the window sized to some peculiar
19030 # dimension larger than 80 columns.
19031 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19032 # (amiga: removed obsolete :kn#10:,
19033 # also added empty <acsc> to suppress a warning --esr)
19035 OTbs, am, bw, xenl,
19037 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19038 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19039 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19040 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19041 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19042 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19043 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19044 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19045 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19046 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19047 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19048 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19049 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19051 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19052 # (amiga: added empty <acsc> to suppress a warning.
19053 # I'm told this entry screws up badly with AS225, the Amiga
19054 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19055 amiga-h|Hans Verkuil's Amiga ANSI,
19058 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19059 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
19060 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19061 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19062 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19063 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19064 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19065 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19066 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19067 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19068 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19069 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19070 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19071 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19072 smso=\2337m, smul=\2334m,
19074 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19076 # Pavel Fedin added
19081 amiga-8bit|Amiga ANSI using 8-bit controls,
19082 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19083 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19084 kpp=\233T, ri=\215, rin@, use=amiga-h,
19086 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19087 # requires use of appropriate preferences settings.
19088 amiga-vnc|Amiga using VNC console (black on light gray),
19089 am, da, db, msgr, ndscr,
19090 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
19091 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19092 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
19093 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19094 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19095 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19096 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19097 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19098 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19099 indn=\E[%p1%dS, invis=\E8m,
19100 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19101 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19102 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19103 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19104 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19105 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19106 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19107 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19108 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19109 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19110 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19111 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19112 smso=\E[1m, smul=\E[4m,
19114 # MorphOS on Genesi Pegasos
19115 # By Pavel Fedin <sonic_amiga@rambler.ru>
19117 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19118 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19119 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19120 ri=\215, rin@, use=amiga-h,
19122 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19123 # I'm trying to write a termcap for a commodore b-128, and I'm
19124 # having a little trouble. I've had to map most of my control characters
19125 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19126 # and create some functions (like cm), but thats life.
19127 # The problem is with the arrow keys - right, and up work fine, but
19128 # left deletes the previous character and down I just can't figure out.
19129 # Jove knows what I want, but I don't know what it's sending to me (it
19130 # isn't thats bound to next-line in jove).
19131 # Anybody got any ideas? Here's my termcap.
19132 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19134 commodore|b-128|Commodore B-128 micro,
19136 OTdN#20, cols#80, lines#24, pb#150,
19137 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
19138 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19139 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19140 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19141 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19146 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19147 northstar|North Star Advantage,
19151 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19152 el=\016$<200/>, home=\034\032$<200/>,
19156 # Thu Jul 7 03:55:16 1983
19158 # As an aside, be careful; it may sound like an anomaly on the
19159 # Osborne, but with the 80-column upgrade, it's too easy to
19160 # enter lines >80 columns!
19162 # I've already had several comments...
19163 # The Osborne-1 with the 80-col option is capable of being
19164 # 52, 80, or 104 characters wide; default to 80 for compatibility
19165 # with most systems.
19167 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19168 osborne-w|osborne1-w|osborne I in 104-column mode,
19170 cols#104, lines#24,
19171 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19172 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19173 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
19174 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19175 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19176 osborne|osborne1|osborne I in 80-column mode,
19177 OTbs, am, mir, msgr, ul, xhp,
19178 OTdB#4, cols#80, lines#24,
19179 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
19180 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19181 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19182 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19183 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19185 # Osborne Executive definition from BRL
19186 # Similar to tvi920
19187 # Added by David Milligan and Tom Smith (SMU)
19188 osexec|Osborne executive,
19190 OTug#1, cols#80, lines#24, xmc#1,
19191 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19192 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19193 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19194 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
19195 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19196 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19197 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19200 #### Console types for obsolete UNIX clones
19202 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19203 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19204 # were commercial, Minix an educational tool sold in conjunction with a book.
19205 # Memory-segmentation limits and a strong tendency to look like V7 long after
19206 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19207 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19208 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19209 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19210 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19211 # even as single processes under SunOS and the Macintosh OS.
19215 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19216 minix|minix console (v3),
19217 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19218 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19219 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19220 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19221 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19222 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19223 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19224 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19225 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19226 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19227 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19228 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19229 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19230 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19231 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19232 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19235 minix-3.0|minix console (v3.0),
19236 use=ecma+color, use=minix-1.7,
19239 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19240 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19241 minix-1.7|minix console (v1.7),
19243 cols#80, it#8, lines#25,
19244 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
19245 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19246 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19247 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19248 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19249 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19250 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19251 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
19252 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
19253 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
19254 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
19255 smso=\E[7m, smul=\E[4m,
19256 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
19257 minix-old|minix-1.5|minix console (v1.5),
19259 cols#80, it#8, lines#25,
19260 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
19261 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19262 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19263 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19264 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
19265 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
19266 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19267 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
19268 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
19269 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
19270 # The linewrap option can be specified by editing /usr/include/minix/config.h
19271 # before recompiling the minix 1.5 kernel.
19272 minix-old-am|minix console with linewrap,
19275 pc-minix|minix console on an Intel box,
19276 use=klone+acs, use=minix-3.0,
19278 # According to the Coherent 2.3 manual, the PC console is similar
19279 # to a z19. The differences seem to be (1) 25 lines, (2) no status
19280 # line, (3) standout is broken, (4) ins/del line is broken, (5)
19281 # has blinking and bold.
19282 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
19284 cols#80, it#8, lines#25,
19285 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19286 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
19287 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
19288 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
19289 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
19291 # According to the Venix 1.1 manual, the PC console is similar
19292 # to a DEC vt52. Differences seem to be (1) arrow keys send
19293 # different strings, (2) enhanced standout, (3) added insert/delete line.
19294 # Note in particular that it doesn't have automatic margins.
19295 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
19296 # not described here because this derives from an old termcap entry.
19297 pc-venix|venix|IBM PC console running Venix,
19298 cols#80, it#8, lines#25,
19299 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19300 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19301 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
19302 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
19304 #### Miscellaneous microcomputer consoles
19306 # If you know anything more about any of these, please tell me.
19309 # The MAI Basic Four computer was obsolete at the end of the 1980s.
19310 # It may be used as a terminal by putting it in "line" mode as seen on
19311 # one of the status lines.
19312 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
19313 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
19314 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
19315 # used \ED instead.
19316 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
19317 mai|basic4|MAI Basic Four in ansi mode,
19318 am, da, db, mir, msgr,
19319 cols#82, it#8, lines#25,
19320 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
19321 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
19322 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
19323 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
19324 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
19325 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
19326 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19327 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
19328 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
19329 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19330 smir=\E[4h, smso=\E[7m, smul=\E[4m,
19331 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
19332 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
19334 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
19335 # The Basis 108 was a Apple II clone, manufactured by the "Basis
19336 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
19337 # about 1,5 km from where I live, but doesn't build own computers any
19338 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
19339 # equipped with one or two 5.25" disk drives, had a monochrome and colour
19340 # video output for a TV set or a dedicated monitor and several slots for
19341 # Apple II cards. Basis 108 were quite popular at german schools before
19342 # the advent of the IBM PC. They run, for example, the UCSD Pascal
19343 # development system (which I used even in 1993 to program the steering
19344 # and data recording for our school's experimental solar panel :), Apple DOS
19346 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
19347 basis|BASIS108 computer with terminal translation table active,
19348 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
19349 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
19350 smso=\E(, use=adm3a,
19351 # luna's BMC terminal emulator
19352 luna|luna68k|LUNA68K Bitmap console,
19353 cols#88, lines#46, use=ansi-mini,
19354 megatek|pegasus workstation terminal emulator,
19357 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
19358 # interface (pre-Macintosh by several years) that went nowhere.
19359 xerox820|x820|Xerox 820,
19362 bel=^G, clear=\032$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19363 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
19366 #### Videotex and teletext
19369 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
19370 # \E[?3l 80 columns
19371 # \E[?4l scrolling on
19372 # \E[12h local echo off
19373 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
19374 # \E)0 G1 DEC set (line graphics)
19376 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
19377 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
19378 OTbs, eslok, hs, xenl,
19379 cols#80, it#8, lines#24, wsl#72, xmc#0,
19380 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
19381 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
19382 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
19383 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19384 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19385 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19386 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
19387 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
19388 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
19389 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
19390 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
19391 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19392 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
19393 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
19394 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19395 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
19396 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
19397 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
19398 u6=\E[%i%d;%dR, u7=\E[6n,
19400 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
19402 minitel1|minitel 1,
19403 am, bw, eslok, hs, hz, .msgr, G0,
19404 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
19405 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
19406 civis=^T, clear=^L, cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
19407 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
19408 dsl=\037@A\030\n, el=^X,
19409 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=^J,
19410 home=^^, ind=^J, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
19411 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
19412 krfr=^SC, nel=^M^J, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
19413 rev=\E], ri=^K, rmso=\E\\,
19414 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19415 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19416 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
19418 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
19419 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
19420 %tC%e%p1%'@'%+%c%;,
19421 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
19422 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
19423 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
19424 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
19425 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=\001Br4\004,
19426 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
19428 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
19429 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
19430 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
19431 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
19432 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
19433 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
19434 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
19435 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
19436 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
19437 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
19438 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
19439 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
19440 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
19442 minitel1b|minitel 1-bistandard (in 40cols mode),
19444 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
19445 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19446 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
19447 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
19448 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
19449 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
19450 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
19451 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
19452 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
19453 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
19454 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
19455 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
19456 rmir=\E[4l, smir=\E[4h,
19457 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
19458 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
19459 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
19460 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=\001Cu<\004,
19462 # rmkx posait des problemes (logout en sortant de vi).
19463 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
19464 am@, bw@, eslok@, hz@, msgr, G0,
19465 colors@, cols#80, it#8, pairs@,
19466 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
19467 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
19468 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19469 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
19470 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
19471 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
19472 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
19473 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19474 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
19475 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
19476 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
19478 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
19479 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
19480 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
19481 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
19483 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
19484 smso=\E[7m, smul=\E[4m,
19485 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
19486 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
19487 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
19488 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
19490 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
19491 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
19492 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
19494 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
19496 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
19497 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
19498 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
19499 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
19500 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
19501 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
19502 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
19503 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
19504 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
19505 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
19508 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
19510 bold=\EG, clear=^L\EB,
19511 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
19512 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
19513 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19514 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
19517 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
19520 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
19521 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
19522 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
19523 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
19524 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
19526 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19527 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
19528 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
19529 .u8=\001Cu|\004r, use=minitel1b,
19533 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
19535 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
19536 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
19537 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
19539 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
19540 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
19541 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
19542 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
19544 # Fonctionne par exemple avec Midnight Commander (mc).
19546 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
19548 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
19549 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
19550 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
19552 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19553 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
19554 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
19555 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
19556 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
19557 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
19558 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
19559 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
19560 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
19561 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
19562 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
19563 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
19564 \,+k\,.l\,0\177\,-j,
19567 minitel12-80|minitel 12 (80cols),
19569 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
19571 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
19573 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
19575 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
19576 E0=^O, S0=\E)3\016,
19577 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19578 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
19579 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
19580 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
19581 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
19582 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
19583 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
19584 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
19585 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
19586 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
19587 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
19588 \,\\\,m\,+k\,.l\,0\177\,-j,
19592 # Add these in your ~/.screenrc for inputting some special glyphs like french
19593 # accentuated chars in 40 cols mode:
19595 # bindkey ^YA digraph '`' # Saisi accent grave.
19596 # bindkey ^YB digraph "'" # Saisi accent aigu.
19597 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
19598 # bindkey ^YH digraph '"' # Saisi accent trema.
19600 # bindkey ^Y# stuff \243 # Livre.
19601 # bindkey "^Y\047" stuff \247 # Paragraphe.
19602 # bindkey ^Yj stuff \306 # AE
19603 # bindkey ^Yz stuff \346 # ae
19604 # bindkey ^YKc stuff \347 # c cedille.
19607 screen.minitel1|Screen specific for minitel1,
19609 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
19611 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
19612 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19615 screen.minitel1b|Screen specific for minitel1b,
19616 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
19617 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
19618 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
19619 use=screen.minitel1,
19621 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
19622 colors@, ncv@, pairs@,
19623 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
19624 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
19625 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
19626 use=screen.minitel1b,
19628 screen.minitel1-nb|Screen specific for minitel1-nb,
19629 colors@, ncv@, pairs@,
19630 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19631 use=screen.minitel1,
19633 screen.minitel1b-nb|Screen specific for minitel1b-nb,
19634 colors@, ncv@, pairs@,
19635 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19636 use=screen.minitel1b,
19638 # From: Alexandre Montaron, 29 Sep 2016
19640 linux-m1|Linux Minitel 1 "like" Couleurs,
19641 am, bw@, ccc, mir, msgr, xenl,
19642 colors#8, it#8, ncv#16, pairs#64,
19643 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
19644 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
19645 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19646 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
19647 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19648 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
19649 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
19650 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
19651 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
19652 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
19653 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
19655 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
19656 kbs=\177, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E^M,
19657 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19658 kdch1=\E[3~, kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A,
19659 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
19660 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
19661 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
19662 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
19663 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
19664 kil1=\E\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, nel=\EE,
19665 oc=\E]R\E]P3FFFF80, op=\E[39;49m, rc=\E8, rev=\E[7m,
19666 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m,
19667 rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7,
19668 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N,
19669 smam=\E[?7h, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
19670 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
19671 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
19672 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
19673 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
19675 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19676 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19677 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19678 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19679 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19680 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19681 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19682 \n\n\n\n\n\n\n\n\n\n,
19684 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
19685 # 2. Native brown color corrected to good yellow color.
19686 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
19687 # 4. Suppressed inexistant underlined mode (normally as bright).
19688 # 5. ich/ich1 not filled because of non-curses programs.
19690 # 6. Suppressed inexistant invisible mode.
19691 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
19693 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
19695 colors@, ncv@, pairs@,
19696 acsc@, bold=\E[33m, enacs@, initc@,
19697 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
19698 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
19699 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19700 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
19701 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
19702 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
19703 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19706 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
19708 colors@, ncv@, pairs@,
19709 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19710 uvvwwxxyyzz{{||}}~~,
19711 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
19712 enacs=\E)0, initc@,
19713 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
19714 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
19715 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
19717 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
19719 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
19720 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
19721 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
19722 \E]PFFFFFFF\E[;37m,
19725 # Screen entries counterpart :
19727 screen.linux-m1|Linux m1 specific for screen,
19729 dim=\E[2m, kbs=\177, kclr=\E^M, kdl1=\E\E[A, kf13=\E[25~,
19730 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
19731 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
19732 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19733 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19734 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19735 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19736 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19737 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19738 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19739 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19740 \n\n\n\n\n\n\n\n\n\n,
19743 screen.linux-m1b|Linux m1b specific for screen,
19745 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
19747 screen.linux-m2|Linux m2 specific for screen,
19748 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19749 uvvwwxxyyzz{{||}}~~,
19750 use=screen.linux-m1b,
19754 putty-m1|Putty Minitel 1 "like" Couleurs,
19756 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19757 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19758 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19759 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19760 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
19762 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
19764 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19765 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19766 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19767 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19768 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
19770 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
19772 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
19774 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19775 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19776 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19777 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19778 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
19781 screen.putty-m1|Putty m1 specific for screen,
19782 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
19784 screen.putty-m1b|Putty m1b specific for screen,
19786 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
19788 screen.putty-m2|Putty m2 specific for screen,
19789 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19790 uvvwwxxyyzz{{||}}~~,
19791 use=screen.putty-m1b,
19792 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
19795 # viewdata lacks a true cup capabilitie,
19796 # so I achieved it with home and cud1/cuf1 sequences only !
19797 viewdata|prestel/viewdata terminals,
19800 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=^M, cub1=^H, cud1=^J,
19802 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
19803 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
19804 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
19805 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
19806 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
19807 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
19808 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
19810 cuu1=^K, home=^^, nel=^M^J, rs2=^L, .el=^X, .ind=^J,
19811 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
19813 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
19814 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
19815 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
19816 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
19817 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
19818 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
19819 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
19820 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
19821 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
19822 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
19823 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
19824 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
19825 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
19826 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
19827 .ll=^^^K, use=viewdata,
19829 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
19831 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
19833 rmso=\EG, smso=\EB, use=viewdata-o,
19835 ######## OBSOLETE VDT TYPES
19837 # These terminals are *long* dead -- these entries are retained for
19838 # historical interest only.
19840 #### Amtek Business Machines
19843 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
19844 # but these caps were commented out in 8.3; also, removed overridden
19845 # ":do=^J:" -- esr)
19846 abm80|amtek business machines 80,
19849 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
19850 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
19851 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
19853 #### Bell Labs blit terminals
19855 # These were AT&T's official entries. The 5620 FAQ maintained by
19856 # David Breneman <daveb@dgtl.com> has this to say:
19858 # Actually, in the beginning was the Jerq, and the Jerq was white with a
19859 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
19860 # was good. But lo, upon the horizon loomed a mighty management-type person
19861 # (known now only by the initials VP) who said, the mighty Jerq must stay
19862 # alone, and could not go forth into the world. So Locanthi and Pike put the
19863 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
19864 # world. And the Jerq lived the rest of its days in research, but never
19865 # strayed from those paths.
19867 # In all seriousness, the Blit was originally known as the Jerq, but when
19868 # it started to be shown outside of the halls of the Bell Labs Research
19869 # organization, the management powers that be decided that the name could
19870 # not remain. So it was renamed to be Blit. This was in late 1981.
19872 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
19876 blit|jerq|blit running teletype rom,
19878 cols#87, it#8, lines#72,
19879 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
19880 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
19881 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
19882 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
19883 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
19884 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
19886 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
19887 cbblit|fixterm|blit running columbus code,
19889 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
19890 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
19891 smul=\EU", use=blit,
19893 oblit|ojerq|first version of blit rom,
19894 am, da, db, eo, mir, ul, xon,
19895 cols#88, it#8, lines#72,
19896 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
19897 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
19898 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
19899 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
19902 #### Bolt, Beranek & Newman (bbn)
19904 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
19905 # The parent company, best known as the architects of the Internet, is
19908 # Jeff DelPapa <dp@world.std.com> writes:
19909 # The bitgraph was a large white box that contained a monochrome bitmap
19910 # display, and a 68000 to run it. You could download code and run it on
19911 # the cpu, it had 128kb (I think) of memory. I used one in the late
19912 # 70's, sure beat a vt100. It had one strange feature tho -- it used
19913 # the cpu to bitblt pixels to scroll, it took longer than the refresh
19914 # rate, and looked like a rubber sheet stretching, then snapping
19915 # upwards. It had everything the early mac had, except a floppy drive a
19916 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
19917 # Beranek and Neuman) sold at most a few hundred of them to the real
19918 # world. DOD may have bought more...
19921 # Entries for the BitGraph terminals. The problem
19922 # with scrolling in vi can only be fixed by getting BBN to put
19923 # smarter scroll logic in the terminal or changing vi or padding
19924 # scrolls with about 500 ms delay.
19926 # I always thought the problem was related to the terminal
19927 # counting newlines in its input buffer before scrolling and
19928 # then moving the screen that much. Then vi comes along and
19929 # paints lines in on the bottom line of the screen, so you get
19930 # this big white gap.
19932 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
19933 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19935 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
19936 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19938 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
19941 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
19942 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
19943 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
19944 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
19945 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19946 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
19947 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
19948 sgr0=\E[m, smkx=\E=, smso=\E[7m,
19950 bg1.25rv|bbn bitgraph 1.25 (reverse video),
19951 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19953 bg1.25nv|bbn bitgraph 1.25 (normal video),
19954 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19956 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
19957 bg1.25|bbn bitgraph 1.25,
19959 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
19960 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
19961 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
19962 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
19963 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
19964 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
19965 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
19968 #### Bull (bq, dku, vip)
19970 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
19972 #============================================#
19973 # BULL QUESTAR 210 `SDP' terminals emulation #
19974 #============================================#
19976 # Description written by R.K.Saunders (Bull Transac)
19978 # Modifications written by F. Girard (Bull MTS)
19979 # 19-05-87 V02.00.01
19980 # 17-12-87 V02.00.02
19981 # 15-09-89 V02.00.05
19983 # Typical technical selections F1 (modes SDP/ROLL):
19984 # -------------------------------------------------------
19985 # | 01 02 03 04 05 06 07 08 09 10 |
19986 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
19988 # | 11 12 13 14 15 16 17 18 19 20 |
19989 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
19991 # | 21 22 23 24 25 26 27 28 29 30 |
19992 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
19994 # | 31 32 33 34 35 36 37 38 39 40 |
19995 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
19996 # -------------------------------------------------------
19997 # Typical firmware identification F5 "etat 6":
19998 # P287.02.04b (AZERTY)
19999 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20000 # P298.03.03 (monochrome) or P374.03.02 (colour)
20002 # SM SDP mode (VIP command): ^[[?=h
20003 # RIS (erases screen): ^[c
20004 # DMI disable keyboard: ^[`
20005 # SM double rendition mode: ^[[?>h
20006 # RM solicited status mode: ^[[5l
20007 # RM character mode: ^[[>l
20008 # RM echoplex mode: ^[[12l
20009 # RM column tab mode: ^[[18l
20010 # RM forbid SS2 keyboard mode: ^[[?<l
20011 # SM scroll mode: ^[[=h
20012 # FCF enable XON/XOFF: ^[P1s^[\
20013 # MTL select end msg character: ^[[^Wp
20014 # EMI enable keyboard: ^[b
20015 # RIS retour etat initial: ^[c
20016 # enable FC keypad: ^[[?<h,
20017 # MPW map status line window: ^[PY99:98^[\
20018 # SCP select status line: ^[[0;98v
20019 # ED erase entire partition: ^[[2J
20020 # SCP select main partition: ^[[v
20021 # SM character insertion mode: ^[[4h
20022 # RM character replacement mode: ^[[4l
20023 # COO cursor on: ^[[r
20024 # COO cursor off: ^[[1r
20025 # SGR dim (turquoise) rev attr: ^[[2;7m
20026 # SGR Data normal attr: ^[[m
20027 # SO Line-graphic mode ON: ^N
20028 # SI Line-graphic mode OFF: ^O
20029 # MC start routing to printer: ^[[5i
20030 # MC stop routing to printer: ^M^[[4i
20033 # This entry covers the following terminals:
20034 # dku7102, tws2102, and tws models 2105 to 2112
20035 tws-generic|dku7102|Bull Questar tws terminals,
20036 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20037 cols#80, it#8, lines#24, wsl#80,
20038 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20039 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20040 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20041 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20042 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20043 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20044 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20045 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20046 il1=\E[L, ind=^J, invis=\E[0;8m,
20047 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20048 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20049 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20050 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20051 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20052 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20053 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20054 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20055 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20056 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20057 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20058 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20059 %p7%t;8%;m%?%p9%t\016%e\017%;,
20060 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20061 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20062 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20063 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20064 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20066 tws2103|xdku|BULL Questar tws2103,
20067 ht=^I, use=tws-generic,
20068 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20069 ht=^I, use=tws2102-sna,
20070 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20071 clear=\E[2J\E[H, cup@, dl@, dl1@,
20072 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20073 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20075 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20076 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20077 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20078 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20079 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20081 #=========================================================#
20082 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20083 #=========================================================#
20085 # Description written by J. Staerck (BULL SA)
20086 # Copyright (c) 1989 BULL SA
20087 #---------------------------------------------------------------------------
20088 # This entry is used for terminals with vt320 emulation mode
20089 # and following set-up :
20090 # 8 bit ISO Latin Character Set (ISO 8859-1),
20091 # 7 bit Control Characters,
20092 # 80 columns screen.
20093 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20094 # They are used in string capabilities with vt220-320 emulation mode.
20095 # In the following DEC definitions, two kinds of terminfo databases are
20097 # 1. the first with Command Sequence Introducer starting with escape
20098 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20099 # 2. the second with Command Sequence Introducer starting with escape
20100 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20101 # Soft Terminal Reset esc [ ! p
20102 # RIS (erases screen): esc c
20103 # DECKPNM numeric keypad mode: esc >
20104 # DECKPAM applic. keypad mode: esc =
20105 # DECSTBM Scrolling region: esc [ r
20106 # SCS select G0 = US: esc ( B
20107 # SCS select G1 = line-graphic: esc ) 0
20108 # Select 7-bit C1 controls: esc sp F
20109 # Select 8-bit C1 controls: esc sp G
20110 # Select cursor home: esc [ H
20111 # Select erase screen: esc [ J
20112 # SM KAM lock keyboard: esc [ 2 h
20113 # RM KAM unlock keyboard: esc [ 2 l
20114 # SM SRM local echo off: esc [ 1 2 h
20115 # RM SRM local echo on: esc [ 1 2 l
20116 # SM LNM New line : esc [ 2 0 h
20117 # RM LNM return = CR only: esc [ 2 0 l
20118 # SM DECCKM cursor keys mode: esc [ ? 1 h
20119 # RM DECCKM appli. keys mode: esc [ ? 1 l
20120 # SM DECANM ANSI mode on: esc [ ? 2 h
20121 # RM DECANM ANSI mode off: esc [ ? 2 l
20122 # SM DECCOLM 132-column screen: esc [ ? 3 h
20123 # RM DECCOLM 80-column screen: esc [ ? 3 l
20124 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20125 # RM DECSCLM Jump scroll: esc [ ? 4 l
20126 # SM DECSCNM screen light backgr. esc [ ? 5 h
20127 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20128 # SM DECOM move within margins: esc [ ? 6 h
20129 # RM DECOM move outside margins: esc [ ? 6 l
20130 # SM DECAWM auto right margin: esc [ ? 7 h
20131 # RM DECAWM auto right margin: esc [ ? 7 l
20132 # SM DECARM auto repeat: esc [ ? 8 h
20133 # RM DECARM auto repeat: esc [ ? 8 l
20134 # DECSASD Select active main: esc [ 0 $ }
20135 # DECSASD Select active status: esc [ 1 $ }
20136 # DECSSDT Select status none: esc [ 0 $ ~
20137 # DECSSDT Select status indic.: esc [ 1 $ ~
20138 # DECSSDT Select status host-wr: esc [ 2 $ ~
20139 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20140 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20141 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20142 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20143 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20144 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20145 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20146 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20147 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20148 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20149 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20150 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20151 # Char. and Line attributes: esc [ Ps ... Ps m
20152 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20153 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20156 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20157 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20158 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20159 cols#80, it#8, lines#24, vt#3, wsl#80,
20160 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20161 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20162 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
20163 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20164 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20165 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20166 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20167 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20168 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20169 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20170 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20171 is1=\E[63;1"p\E[2h,
20172 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20174 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20175 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20176 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20177 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20178 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20179 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20180 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20181 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20182 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20183 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20184 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20185 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20187 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20188 %;m%?%p9%t\E(0%e\E(B%;,
20189 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20190 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20191 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20192 bq300-rv|Bull vt320 reverse 80 columns,
20193 flash=\E[?5l$<50>\E[?5h,
20194 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20197 bq300-w|Bull vt320 132 columns,
20199 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20201 rs2=\E[?3h, use=bq300,
20202 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20204 flash=\E[?5l$<50>\E[?5h,
20205 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20207 rs2=\E[?3h, use=bq300,
20209 # This entry is used for terminals with vt320 emulation mode
20210 # and following set-up :
20211 # 8 bit ISO Latin Character Set (ISO 8859-1),
20212 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20213 # 80 columns screen.
20214 # Soft Terminal Reset csi ! p
20215 # RIS (erases screen): esc c
20216 # DECKPNM numeric keypad mode: esc >
20217 # DECKPAM applic. keypad mode: esc =
20218 # DECSTBM Scrolling region: esc [ r
20219 # SCS select G0 = US: esc ( B
20220 # SCS select G1 = line-graphic: esc ) 0
20221 # Select 7-bit C1 controls: esc sp F
20222 # Select 8-bit C1 controls: esc sp G
20223 # Select cursor home: csi H
20224 # Select erase screen: csi J
20225 # SM KAM lock keyboard: csi 2 h
20226 # RM KAM unlock keyboard: csi 2 l
20227 # SM SRM local echo off: csi 1 2 h
20228 # RM SRM local echo on: csi 1 2 l
20229 # SM LNM New line : csi 2 0 h
20230 # RM LNM return = CR only: csi 2 0 l
20231 # SM DECCKM cursor keys mode: csi ? 1 h
20232 # RM DECCKM appli. keys mode: csi ? 1 l
20233 # SM DECANM ANSI mode on: csi ? 2 h
20234 # RM DECANM ANSI mode off: csi ? 2 l
20235 # SM DECCOLM 132-column screen: csi ? 3 h
20236 # RM DECCOLM 80-column screen: csi ? 3 l
20237 # SM DECSCLM Smooth scroll: csi ? 4 h
20238 # RM DECSCLM Jump scroll: csi ? 4 l
20239 # SM DECSCNM screen light backgr. csi ? 5 h
20240 # RM DECSCNM screen dark backgr. csi ? 5 l
20241 # SM DECOM move within margins: csi ? 6 h
20242 # RM DECOM move outside margins: csi ? 6 l
20243 # SM DECAWM auto right margin: csi ? 7 h
20244 # RM DECAWM auto right margin: csi ? 7 l
20245 # SM DECARM auto repeat: csi ? 8 h
20246 # RM DECARM auto repeat: csi ? 8 l
20247 # DECSASD Select active main: csi 0 $ }
20248 # DECSASD Select active status: csi 1 $ }
20249 # DECSSDT Select status none: csi 0 $ ~
20250 # DECSSDT Select status indic.: csi 1 $ ~
20251 # DECSSDT Select status host-wr: csi 2 $ ~
20252 # SM DECTCEM Visible cursor: csi ? 2 5 h
20253 # RM DECTCEM Invisible cursor: csi ? 2 5 l
20254 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
20255 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
20256 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
20257 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
20258 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
20259 # Char. and Line attributes: csi Ps ... Ps m
20260 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20261 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20262 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
20263 bq300-8|Bull vt320 full 8 bits 80 columns,
20264 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
20265 cols#80, it#8, lines#24, vt#3, wsl#80,
20266 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20267 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
20268 clear=\233H\233J, cnorm=\233?25h, cr=^M,
20269 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
20270 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
20271 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
20272 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
20273 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
20274 el=\233K, el1=\2331K, enacs=\E(B\E)0,
20275 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
20276 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
20277 ind=\ED, is1=\E[63;2"p\E[2h,
20278 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20280 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
20281 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
20282 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20283 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
20284 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
20285 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
20286 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
20287 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
20288 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
20289 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
20290 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
20291 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
20292 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
20293 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
20294 s0ds=\E(B, s1ds=\E(0, sc=\E7,
20295 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
20296 1%;m%?%p9%t\E(0%e\E(B%;,
20297 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
20298 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
20299 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
20300 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
20301 flash=\233?5l$<50>\233?5h,
20302 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20305 bq300-8w|Bull vt320 8-bit 132 columns,
20307 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20309 rs2=\233?3h, use=bq300-8,
20310 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
20312 flash=\233?5l$<50>\233?5h,
20313 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20315 rs2=\233?3h, use=bq300-8,
20317 # This entry is used for terminals with vt320 emulation mode
20318 # a 102 keys keyboard (PC scancode !) and following set-up :
20319 # 8 bit ISO Latin Character Set (ISO 8859-1),
20320 # 7 bit Control Characters,
20321 # 80 columns screen.
20322 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
20323 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
20324 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
20325 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
20326 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20327 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20328 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
20329 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
20330 flash=\E[?5l$<50>\E[?5h,
20331 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20334 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
20336 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20338 rs2=\E[?3h, use=bq300-pc,
20339 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
20341 flash=\E[?5l$<50>\E[?5h,
20342 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20344 rs2=\E[?3h, use=bq300-pc,
20345 # 8 bit ISO Latin Character Set (ISO 8859-1),
20346 # 8 bit Control Characters,
20347 # 80 columns screen.
20348 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
20349 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
20350 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
20351 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
20352 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20353 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
20354 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
20355 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
20356 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
20357 flash=\E[?5l$<50>\E[?5h,
20358 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20361 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
20363 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20365 rs2=\E[?3h, use=bq300-8-pc,
20366 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
20368 flash=\E[?5l$<50>\E[?5h,
20369 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20371 rs2=\E[?3h, use=bq300-8-pc,
20373 #======================================================#
20374 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
20375 #======================================================#
20377 # normal mode, 8 bits, 80 columns terminal.
20379 # RIS reset initial state: ^[c
20380 # BLE bell enable ^[h
20381 # BLD bell disable ^[g
20382 # CAMS char. attr. mode set ^[[D
20383 # CAMR char. attr. mode reset ^[[G
20385 # KBU keyboard unlock (set) ^[[W
20386 # KBL keyboard lock (reset) ^[[X
20387 # CM character mode (async.) ^[k
20388 # NEP non echoplex mode (by host) ^[l
20389 # EP echoplex mode (by host) ^[m
20390 # IM insert mode set ^[[I
20391 # IM insert mode reset ^[[J
20392 # RMS roll mode set ^[r
20393 # RMR roll mode reset ^[q
20394 # SM78 set mode vip7800 ^[[1q
20395 # SD scroll up (72 lines) ^[[0s
20396 # SD scroll down (72 lines) ^[[1s
20397 # RBM block mode reset ^[[E
20398 # SLS status line set ^[w
20399 # SLR status line reset ^[v
20400 # SLL status line lock ^[O
20401 # LGS Line-graphic mode set ^[G
20402 # LGR Line-graphic mode reset ^[F
20403 # TBC tab clear (at cursor pos.) ^[[g
20404 # TBI tab initialize ^[[N
20405 # TBS tab set (at cursor pos.) ^[p
20406 # PDS print data space ^[[0p
20407 # PHD print host data ^[[3p
20408 # PDT print data terminator ^[[<p
20409 # PRES print adapter reset ^[[2p
20410 # SSPR multi-part. reset ^[[<>u
20411 # SSP0 partition 0 set ^[[00u
20412 # SSP1 partition n format 1 ^[[PnPnSTRINGu
20413 # SSP2 partition n format 2 ^[[PnPnSTRINGu
20414 # SSP3 partition n format 3 ^[[PnPnu
20415 # ATR attribute (visual)
20418 # hide (blank) : ^[sH
20420 # inverse video : ^[sI
20425 # This covers the vip7800 and BQ3155-vip7800
20426 vip|Bull Questar 3155-7800,
20427 am, eslok, hs, km, mc5i, msgr, xenl, xon,
20428 cols#80, it#8, lines#24, vt#3, wsl#80,
20429 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
20430 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20431 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
20432 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
20433 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
20434 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
20435 is2=\E[00u\E[<>001001024080024080u\E[01u,
20436 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
20437 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
20438 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
20439 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
20440 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
20441 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
20442 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
20443 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
20444 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
20445 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
20446 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
20447 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
20448 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
20449 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
20450 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
20451 smul=\Es_, tbc=\E[N, tsl=\Ew,
20452 # normal screen, 8 bits, 132 columns terminal.
20453 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
20455 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
20456 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
20458 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
20459 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
20460 cols#132, lines#72, wsl#132,
20461 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
20466 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
20467 # that is smaller than the screen, and puts up a warning message
20468 # outside the window. Te erases the warning message, puts the
20469 # window back to be the whole screen, and puts the cursor at just
20470 # below the small window. I defined <cnorm> and <civis> to really turn
20471 # the cursor on and off, but I have taken this out since I don't
20472 # like the cursor being turned off when vi exits.
20473 cg7900|chromatics|chromatics 7900,
20476 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
20477 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
20478 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
20479 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
20481 rmso=\001C1\,\001c2\,,
20482 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
20483 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
20484 \001W0\,0\,79\,39\,,
20485 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
20487 #### Computer Automation
20490 ca22851|computer automation 22851,
20493 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
20494 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
20495 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
20500 # This entry has correct padding and the undocumented "ri" capability
20501 cyb83|xl83|cybernex xl-83,
20504 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
20505 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
20506 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
20507 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
20508 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
20509 cyb110|mdl110|cybernex mdl-110,
20512 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
20513 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20514 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
20515 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
20516 ht=\011$<43>, ich1=\016A\035$<3.5>,
20517 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
20521 # Datapoint is gone. They used to be headquartered in Texas.
20522 # They created ARCnet, an Ethernet competitor that flourished for a while
20523 # in the early 1980s before 3COM got wise and cut its prices. The service
20524 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
20527 dp3360|datapoint|datapoint 3360,
20530 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
20531 ed=^_, el=^^, home=^], ind=^J,
20533 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
20534 # The Datapoint 8242 Workstation was sold at least between 1985
20535 # and 1989. To make the terminal work with this entry, press
20536 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
20537 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
20538 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
20539 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
20540 # fact unusable because the strings sent by the terminal conflict
20541 # with other keys).
20542 # The terminal is capable of displaying "box draw" characters.
20543 # For each graphic character you must send 2 ESC's (\E\E) followed
20544 # by a control character as follows:
20545 # character meaning
20546 # ========= =======
20549 # ctrl-G bottom tee
20552 # ctrl-J top left corner
20553 # ctrl-K top right corner
20554 # ctrl-L bottom left corner
20555 # ctrl-M bottom right corner
20556 # ctrl-N horizontal line
20557 # ctrl-O vertical line
20558 # Unfortunately this cannot be fitted into the termcap/terminfo
20559 # description scheme.
20560 dp8242|datapoint 8242,
20563 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
20564 cr=^M, cub1=^H, cud1=^J,
20565 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
20566 home=^U, ht=^I, il1=\E^T, ind=^C,
20567 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20568 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
20569 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
20570 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
20571 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
20572 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20573 smso=\E^E, smul=\E^F,
20574 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
20577 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
20579 # These entries are DEC's official terminfos for its older terminals.
20580 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
20581 # Engineering for more information. Updated terminfos and termcaps
20582 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
20588 bel=^G, cr=^M, cub1=^H, cud1=^J,
20592 bel=^G, cr=^M, cub1=^H, cud1=^J,
20596 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20597 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
20601 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20602 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20603 el=\EK, ht=^I, ind=^J, ri=\EI,
20604 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
20605 vt61|vt-61|vt61.5|dec vt61,
20607 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
20608 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
20609 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
20610 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20613 # The gigi does standout with red!
20614 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
20615 gigi|vk100|dec gigi graphics terminal,
20618 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
20619 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
20620 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20621 el=\E[K, ht=^I, ind=^J,
20622 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
20623 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
20624 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
20625 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20626 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
20629 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
20630 # a PC differentiated from the IBM clones. It was a total, ludicrous,
20631 # grossly-overpriced failure (among other things, DEC's OS didn't include
20632 # a format program, so you had to buy pre-formatted floppies from DEC at
20633 # a hefty premium!).
20634 pro350|decpro|dec pro console,
20636 cols#80, it#8, lines#24,
20637 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20638 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
20639 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20640 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20641 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
20642 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
20643 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
20648 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
20649 dw2|decwriter|dw|decwriter II,
20652 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
20653 # \E(B Use U.S. character set (otherwise # => british pound !)
20654 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
20655 # \E[w 10 char/in pitch
20656 # \E[1;132 full width horizontal margins
20657 # \E[2g clear all tab stops
20659 # \E[66t 66 lines/page (for \f)
20660 # \E[1;66r full vertical page can be printed
20661 # \E[4g clear vertical tab stops
20662 # \E> disable alternate keypad mode (so it transmits numbers!)
20663 # \E[%i%p1%du set tab stop at column %d (origin == 1)
20664 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
20667 # The dw3 does standout with wide characters.
20669 dw3|la120|decwriter III,
20672 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
20673 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
20674 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
20676 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
20680 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
20681 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
20683 # These aren't official
20684 ln03|dec ln03 laser printer,
20687 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
20688 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
20690 ln03-w|dec ln03 laser printer 132 cols,
20692 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
20693 kcud1=^J, nel=^M^J, use=ln03,
20695 #### Delta Data (dd)
20698 # Untested. The cup sequence is hairy enough that it probably needs work.
20699 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
20700 # There are BSD-derived termcap entries floating around for this puppy
20701 # that are *certainly* wrong.
20702 delta|dd5000|delta data 5000,
20705 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
20706 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
20708 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
20710 #### Digital Data Research (ddr)
20713 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
20714 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
20716 cols#80, it#8, lines#24, vt#3,
20717 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20718 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
20719 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
20720 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
20721 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
20722 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
20723 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
20724 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
20725 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
20726 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
20727 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
20730 #### Evans & Sutherland
20733 # Jon Leech <leech@cs.unc.edu> tells us:
20734 # The ps300 was the Evans & Sutherland Picture System 300, a high
20735 # performance 3D vector graphics system with a bunch of specialized hardware.
20736 # Approximate date of release was 1982 (early 80s, anyway), and it had several
20737 # evolutions including (limited) color versions such as the PS330C. PS300s
20738 # were effectively obsolete by the late 80s, replaced by raster graphics
20739 # systems, although specialized applications like molecular modelling
20740 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
20741 # are out of production, though of course E&S is very much alive (in 1996).
20742 # (ps300: changed ":pt@:" to "it@" -- esr)
20744 ps300|Picture System 300,
20747 rmso@, rmul@, smso@, smul@, use=vt100,
20749 #### General Electric (ge)
20752 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
20755 bel=^G, cr=^M, cud1=^J, ind=^J,
20757 #### Heathkit/Zenith
20760 # Here is a description of the H19 DIP switches:
20763 # 0-3 = baud rate as follows:
20768 # 0 1 0 1 1200 baud
20769 # 1 0 0 0 2400 baud
20770 # 1 0 1 0 4800 baud
20771 # 1 1 0 0 9600 baud
20772 # 1 1 0 1 19.2K baud
20774 # 4 = parity (0 = no parity)
20775 # 5 = even parity (0 = odd parity)
20776 # 6 = stick parity (0 = normal parity)
20777 # 7 = full duplex (0 = half duplex)
20780 # 0 = block cursor (0 = underscore cursor)
20781 # 1 = no key click (0 = keyclick)
20782 # 2 = wrap at end of line (0 = no wrap)
20783 # 3 = auto LF on CR (0 = no LF on CR)
20784 # 4 = auto CR on LF (0 = no CR on LF)
20785 # 5 = ANSI mode (0 = VT52 mode)
20786 # 6 = keypad shifted (0 = keypad unshifted)
20787 # 7 = 50Hz refresh (1 = 60Hz refresh)
20789 # Factory Default settings are as follows:
20791 # S401 1 0 0 0 1 1 0 0
20792 # S402 0 0 0 0 0 0 0 0
20793 # (h19: I added <rmam>/<smam> based on the init string;
20794 # also added empty <acsc> to suppress a tic warning -- esr)
20795 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
20796 OTbs, am, mir, msgr,
20797 cols#80, it#8, lines#24,
20798 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
20799 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
20800 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
20801 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
20802 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
20803 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
20804 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
20805 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
20806 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
20807 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
20808 h19-bs|heathkit w/keypad shifted,
20809 rmkx=\Eu, smkx=\Et, use=h19-b,
20810 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
20811 rmkx=\Eu, smkx=\Et, use=h19-u,
20812 # (h19: merged in <ip> from BSDI hp19-e entry>;
20813 # also added empty <acsc> to suppress a tic warning --esr)
20814 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
20815 # Tim tells us that:
20816 # I have an old Zenith-19 terminal at home that still gets a lot of use.
20817 # This terminal suffers from the same famous insert-mode padding lossage
20818 # that has been acknowledged for the Z29 terminal. Emacs is nearly
20819 # unusable on this box, since even a half-scroll up or down the window
20820 # causes flaming terminal death.
20822 # On the Z19, the only way I have found around this problem is to remove
20823 # the :al: and :dl: entries entirely. No amount of extra padding will
20824 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
20825 # makes Emacs a little slower, but it remains in the land of the living.
20827 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
20828 OTbs, am, eslok, hs, mir, msgr,
20829 cols#80, it#8, lines#24,
20830 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
20831 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20832 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
20833 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
20834 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20835 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
20836 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
20837 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
20838 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
20839 h19-u|heathkit with underscore cursor,
20840 cnorm@, cvvis@, use=h19-b,
20841 h19-g|h19g|heathkit w/block cursor,
20842 cnorm=\Ex4, cvvis@, use=h19-b,
20843 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
20845 dl1=\EM, il1=\EL, use=h19,
20847 # The major problem with the Z29 is that it requires more padding than the Z19.
20849 # The problem with declaring an H19 to be synonymous with a Z29 is that
20850 # it needs more padding. It especially loses if a program attempts
20851 # to put the Z29 into insert mode and insert text at 9600 baud. It
20852 # even loses worse if the program attempts to insert tabs at 9600
20853 # baud. Adding padding to text that is inserted loses because in
20854 # order to make the Z29 not die, one must add so much padding that
20855 # whenever the program tries to use insert mode, the effective
20856 # rate is about 110 baud.
20858 # What program would want to put the terminal into insert mode
20859 # and shove stuff at it at 9600 baud you ask?
20861 # Emacs. Emacs seems to want to do the mathematically optimal
20862 # thing in doing a redisplay rather than the practical thing.
20863 # When it is about to output a line on top of a line that is
20864 # already on the screen, instead of just killing to the end of
20865 # the line and outputting the new line, it compares the old line
20866 # and the new line and if there are any similarities, it
20867 # constructs the new line by deleting the text on the old line
20868 # on the terminal that is already there and then inserting new
20869 # text into the line to transform it into the new line that is
20870 # to be displayed. The Z29 does not react kindly to this.
20872 # But don't cry for too long.... There is a solution. You can make
20873 # a termcap entry for the Z29 that says the Z29 has no insert mode.
20874 # Then Emacs cannot use it. "Oh, no, but now inserting into a
20875 # line will be really slow", you say. Well there is a sort of a
20876 # solution to that too. There is an insert character option on
20877 # the Z29 that will insert one character. Unfortunately, it
20878 # involves putting the terminal into ansi mode, inserting the
20879 # character, and changing it back to H19 mode. All this takes 12
20880 # characters. Pretty expensive to insert one character, but it
20881 # works. Either Emacs doesn't try to use its inserting hack when
20882 # it's only given an insert character ability or the Z29 doesn't
20883 # require padding with this (the former is probably more likely,
20884 # but I haven't checked it out).
20885 # (z29: added empty <acsc> to suppress a tic warning, merged in
20886 # status line capabilities from BRL entry --esr)
20887 z29|zenith29|z29b|zenith z29b,
20888 OTbs, OTpt, am, eslok, hs, mir, msgr,
20889 OTkn#10, cols#80, lines#24,
20890 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
20891 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20892 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
20893 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
20894 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
20895 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
20896 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20897 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
20898 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
20899 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
20900 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
20901 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
20902 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
20903 # the world is stable. <rs1> causes the terminal to be reset to the state
20904 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
20905 # cursor, bc -> block cursor.
20906 # From: Mike Meyers
20907 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
20908 # looks vt100-compatible -- esr)
20909 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
20910 OTbs, OTpt, am, eslok, hs, mir, msgr,
20911 OTkn#10, cols#80, it#8, lines#24,
20912 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
20913 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20914 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
20915 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20916 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20917 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
20918 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
20919 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
20920 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
20921 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
20922 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
20923 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
20924 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
20925 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
20927 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
20928 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
20929 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
20930 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
20933 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
20934 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
20937 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
20938 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
20941 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
20942 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
20943 am, eslok, hs, mc5i, mir, msgr, xon,
20945 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
20946 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
20947 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
20948 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20949 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20950 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20951 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20952 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
20953 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
20954 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
20955 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
20956 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
20957 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
20958 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
20959 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
20960 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
20961 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
20962 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20963 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
20965 # From: Brad Brahms <Brahms@USC-ECLC>
20966 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
20967 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
20968 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
20969 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
20970 OTbs, OTpt, mir, msgr,
20971 OTkn#10, cols#80, it#8, lines#24,
20972 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
20973 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
20974 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
20975 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
20976 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
20977 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
20978 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
20979 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
20980 smir=\E@, smso=\Ep,
20981 p19|h19-b with il1/dl1,
20982 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
20983 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
20984 # (ztx: removed duplicate :sr: -- esr)
20985 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
20986 OTbs, am, eslok, hs,
20987 cols#80, it#8, lines#24,
20988 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
20989 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
20990 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
20991 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
20992 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
20993 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
20994 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
20995 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
20997 #### IMS International (ims)
20999 # There was a company called IMS International located in Carson City,
21000 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21001 # bus/Z80 hardware and a line of terminals called Ultimas.
21004 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21005 ims950-b|bare ims950 no init string,
21007 # (ims950: removed obsolete ":ko@:" -- esr)
21008 ims950|ims televideo 950 emulation,
21010 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21011 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21012 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21013 ims950-rv|ims tvi950 rev video,
21015 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21016 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21017 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21019 cols#80, it#8, lines#24,
21020 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21021 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21022 ht=^I, if=/usr/share/tabset/vt100,
21023 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21024 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21025 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21028 #### Intertec Data Systems
21030 # I think this company is long dead as of 1995. They made an early CP/M
21031 # micro called the "Intertec Superbrain" that was moderately popular,
21032 # then sank out of sight.
21035 superbrain|intertec superbrain,
21038 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
21039 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21040 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
21041 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21042 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21043 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21044 # and the reverse is actually true. Try it. -- esr)
21045 intertube|intertec|Intertec InterTube,
21048 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
21049 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21050 ind=^J, rmso=\E0@, smso=\E0P,
21051 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21052 # are typing and a command comes in, the keystrokes you type get interspersed
21053 # with the command and it messes up
21054 intertube2|intertec data systems intertube 2,
21056 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21057 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21058 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21060 #### Ithaca Intersystems
21062 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21063 # past. They used to be reachable at:
21065 # Ithaca Intersystems
21066 # 1650 Hanshaw Road
21067 # Ithaca, New York 14850
21069 # However, the outfit went bankrupt years ago.
21072 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21073 # These entries were written (originally in termcap syntax) by Brian Yandell
21074 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21075 # University of Wisconsin.
21077 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21078 # removed <if=/usr/share/tabset/init.graphos> and
21079 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21080 graphos|graphos III,
21082 cols#80, it#8, lines#24,
21083 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21084 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21085 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21086 cuu=\E[%p1%dA, cuu1=\E[A,
21087 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21088 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21089 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21090 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21091 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21092 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21093 smir=\E[4h, smso=\E[7m,
21094 graphos-30|graphos III with 30 lines,
21096 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21100 # These people used to be reachable at:
21103 # 1393 Main Street,
21104 # Waltham, MA 02154
21105 # Vox: (617)-890-5796.
21107 # However, if you call that number today you'll get an insurance company.
21108 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21109 # 26 Feb 1997 that says:
21111 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21112 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21113 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21114 # panel-mount etc). I can be emailed at sonfour@aol.com
21116 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21117 # dated 1984. According to the manual, it featured Tek 4010/4014
21118 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21121 modgraph|mod24|modgraph terminal emulating vt100,
21124 cvvis=\E\^9;0s\E\^7;1s,
21125 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21126 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21127 \E\^11;81s\E\^11;89s,
21128 rf@, ri=\EM\E[K$<5/>, use=vt100,
21129 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21130 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21132 cols#80, it#8, lines#24,
21133 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21134 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21135 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21136 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21137 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21138 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21139 1s\E\^9;1s\E\^27;1,
21142 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21143 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21144 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21145 # mark and using delete-to-killbuffer work correctly. However, we would
21146 # like normal mode of operation to be using a Modgraph with 48 line setting.
21147 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21148 # the setting mark and delete-to-killbuffer results in the deletion of only
21149 # the line the mark is set on.
21150 # We've discovered that the delete-to-killbuffer works correctly
21151 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21152 # the first line disappears but a ctrl-l shows that it did work
21154 modgraph48|mod|Modgraph w/48 lines,
21155 OTbs, OTpt, am, xenl,
21156 cols#80, it#8, lines#48, vt#3,
21157 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21158 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
21159 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21160 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21161 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21162 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21163 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21164 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21165 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21166 smso=\E[7m, smul=\E[4m,
21168 #### Morrow Designs
21170 # This was George Morrow's company. They started in the late 1970s making
21171 # S100-bus machines. They used to be reachable at:
21174 # 600 McCormick St.
21175 # San Leandro, CA 94577
21177 # but they're long gone now (1995).
21180 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21181 # Jeff's specimen was dated June 1984.
21182 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21183 mt70|mt-70|Morrow MD-70; native Morrow mode,
21184 am, mir, msgr, xon,
21185 cols#80, it#8, lines#24,
21186 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21187 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
21188 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21189 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21190 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21191 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21192 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21193 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21194 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21195 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21196 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21197 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21198 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21199 smul=\EG1, tbc=\E0, use=adm+sgr,
21204 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21206 ex155|Motorola Exorterm 155,
21208 OTkn#5, OTug#1, cols#80, lines#24,
21209 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21210 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21211 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21212 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21213 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21217 # This company is still around in 1995, manufacturing point-of-sale systems.
21219 omron|Omron 8025AG,
21222 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
21223 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21224 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21228 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21229 # were competition for things like the Tektronics 4025.
21232 # Ramtek 6221 from BRL, probably by Doug Gwyn
21233 # The following SET-UP modes are assumed for normal operation:
21234 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21235 # NEWLINE_OFF 80_COLUMNS
21236 # Other SET-UP modes may be set for operator convenience or communication
21237 # requirements; I recommend
21238 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21239 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21240 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21241 # Note that the Control-E key is useless on this brain-damaged terminal. No
21242 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21243 rt6221|Ramtek 6221 80x24,
21244 OTbs, OTpt, msgr, xon,
21245 OTkn#4, cols#80, it#8, lines#24, vt#3,
21246 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21247 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
21248 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21249 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21250 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21251 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21252 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21253 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
21254 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
21255 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
21256 rmso=\E[m, rmul=\E[m,
21257 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
21258 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
21260 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
21261 smul=\E[4m, tbc=\E[3g,
21262 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
21263 rt6221-w|Ramtek 6221 160x48,
21264 cols#160, lines#48,
21265 ll=\E[48;1H, use=rt6221,
21270 # RCA VP3301 or VP3501
21271 rca|rca vp3301/vp3501,
21274 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21275 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
21281 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
21282 # The following SET-UP modes are assumed for normal operation:
21283 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
21284 # ONLINE ANSI CURSOR_VISIBLE
21285 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
21286 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
21287 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
21288 # For use with graphics software, all graphics modes should be set to factory
21289 # default. Other SET-UP modes may be set for operator convenience or
21290 # communication requirements. No delays are specified; use "stty ixon -ixany"
21291 # to enable DC3/DC1 flow control!
21292 # I commented out the scrolling capabilities since they are too slow.
21293 hirez100|Selanar HiREZ-100,
21294 OTbs, OTpt, mir, msgr, xon,
21295 OTkn#4, cols#80, it#8, lines#48, vt#3,
21296 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
21297 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
21298 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21299 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
21300 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
21301 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
21302 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
21303 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
21304 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
21305 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
21306 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21307 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
21308 9l\E[r\E[m\E(B\017\E)0\E>,
21309 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
21310 smul=\E[4m, tbc=\E[3g,
21311 hirez100-w|Selanar HiREZ-100 in 132-column mode,
21312 cols#132, use=hirez100,
21317 # From University of Wisconsin
21318 vsc|Signetics Vsc Video driver by RMC,
21320 cols#80, it#8, lines#26,
21321 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
21322 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21323 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
21324 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
21328 # Alan Frisbie <frisbie@flying-disk.com> writes:
21330 # As you may recall, the Soroc logo consisted of their name,
21331 # with the letter "S" superimposed over an odd design. This
21332 # consisted of a circle with a slightly smaller 15 degree (approx.)
21333 # wedge with rounded corners inside it. The color was sort of
21334 # a metallic gold/yellow.
21336 # If I had been more of a beer drinker it might have been obvious
21337 # to me, but it took a clue from their service department to make
21338 # me exclaim, "Of course!" The circular object was the top of
21339 # a beer can (the old removable pop-top style) and "Soroc" was an
21340 # anagram for "Coors".
21342 # I can just imagine the founders of the company sitting around
21343 # one evening, tossing back a few and trying to decide what to
21344 # call their new company and what to use for a logo.
21347 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
21348 soroc120|iq120|soroc|soroc iq120,
21349 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
21350 kcuf1=^L, kcuu1=^K, use=adm3a,
21351 soroc140|iq140|soroc iq140,
21354 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
21355 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
21356 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
21357 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
21358 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21359 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
21360 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
21362 #### Southwest Technical Products
21364 # These guys made an early personal micro called the M6800.
21365 # The ct82 was probably its console terminal.
21368 # (swtp: removed obsolete ":bc=^D:" -- esr)
21369 swtp|ct82|southwest technical products ct82,
21372 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
21373 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
21374 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
21375 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
21376 \017\035\027\022\011,
21377 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
21381 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
21383 # Synertek used to make ICs, various 6502-based single-board process
21384 # control and hobbyist computers, and assorted peripherals including a
21385 # series of small inexpensive terminals (I think they were one of the
21386 # first to have a "terminal-on-a-keyboard", where the terminal itself
21387 # was only slightly larger than the keyboard).
21389 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
21390 # was a 40x24 terminal that could connect to a standard TV through a
21391 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
21392 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
21393 # I have a KTM-2/80 still in working order. The KTM-2s had fully
21394 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
21395 # ROM and 2 ROMs as character generators. They were incredibly simple,
21396 # and I've never had any problems with mine (witness the fact that mine
21397 # was made in 1981 and is still working great... I've blown the video
21398 # output transistor a couple of times, but it's a 2N2222 :-)
21400 # The KTM-3 (which is what is listed in the terminfo file) was their
21401 # attempt at putting a KTM-2 in a box (and some models came with a
21402 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
21403 # control and escape sequences are very different. The KTM-3 was always
21404 # real broken, at least according to the folks I've talked to about it.
21406 # The padding in the entry is probably off--these terminals were very
21407 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
21408 # anyone with any sanity replaced the ROMs with something that provided
21409 # a reasonable subset of VT100 functionality, since the usual ROMs were
21410 # obviously very primitive... oh, you could get an upgraded ROM from
21411 # Synertek for some incredible amount of money, but what hacker with an
21412 # EPROM burner would do that? :)
21414 # Sorry I don't have any contact info; I believe they were located in
21415 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
21416 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
21417 # business these days.
21420 # Tested, seems to work fine with vi.
21421 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
21424 clear=^Z, cub1=^H, cuf1=^L,
21425 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21427 #### Tab Office Products
21429 # TAB Products Co. - Palo Alto, California
21430 # Electronic Office Products,
21431 # 1451 California Avenue 94304
21433 # I think they're out of business.
21436 # The tab 132 uses xon/xoff, so no padding needed.
21437 # <smkx>/<rmkx> have nothing to do with arrow keys.
21438 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
21439 # Seems to be no way to get rid of status line.
21440 # The manual for this puppy was dated June 1981. It claims to be VT52-
21441 # compatible but looks more vt100-like.
21442 tab132|tab|tab132-15|tab 132/15,
21444 OTdN@, cols#80, lines#24, lm#96,
21445 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
21446 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
21447 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
21448 tab132-w|tab132 in wide mode,
21450 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
21451 tab132-rv|tab132 in reverse-video mode,
21452 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
21453 tab132-w-rv|tab132 in reverse-video/wide mode,
21454 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
21459 # Research Incorporated
21460 # 6425 Flying Cloud Drive
21461 # Eden Prairie, MN 55344
21462 # Vox: (612)-941-3300
21464 # The Teleray terminals were all discontinued in 1992-93. RI still services
21465 # and repairs these beasts, but no longer manufactures them. The Teleray
21466 # people believe that all the types listed below are very rare now (1995).
21467 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
21468 # Model 100) that were ANSI-compatible.
21470 # Note two things called "teleray". Reorder should move the common one
21471 # to the front if you have either. A dumb teleray with the cursor stuck
21472 # on the bottom and no obvious model number is probably a 3700.
21475 t3700|dumb teleray 3700,
21478 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
21479 t3800|teleray 3800 series,
21481 cols#80, it#8, lines#24,
21482 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
21483 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21484 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
21485 t1061|teleray|teleray 1061,
21486 OTbs, am, km, xhp, xt,
21487 cols#80, it#8, lines#24, xmc#1,
21488 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
21489 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21490 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
21491 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
21492 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
21493 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
21494 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
21495 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
21497 t1061f|teleray 1061 with fast PROMs,
21498 dl1=\EM, il1=\EL, ip@, use=t1061,
21499 # "Teleray Arpa Special", officially designated as
21500 # "Teleray Arpa network model 10" with "Special feature 720".
21501 # This is the new (1981) fast microcode updating the older "arpa" proms
21502 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
21503 # converts the keypad to programmable function keys, and has other goodies.
21504 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
21505 # programs handle such lossage properly.
21506 # Note: this is NOT the old termcap's "t1061f with fast proms."
21507 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
21508 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
21509 t10|teleray 10 special,
21511 cols#80, it#8, lines#24, xmc#2,
21512 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
21513 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21514 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
21515 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
21517 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
21518 # back/forth words. Put the function keys (f1-f10) where they can be
21519 # found, and turn off the other magic keys along the top row, except
21520 # for line/local. Do the magic appropriate to make the page shifts work.
21521 # Also toggle ^S/^Q for those of us who use Emacs.
21523 am, da, db, mir, xhp, xt,
21525 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
21526 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
21527 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
21528 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
21529 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
21530 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
21531 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
21532 smso=\E[7m, smul=\E[4m,
21534 #### Texas Instruments (ti)
21537 # The Silent 700 was so called because it was built around a quiet thermal
21538 # printer. It was portable, equipped with an acoustic coupler, and pretty
21539 # neat for its day.
21540 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
21543 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
21546 # Texas Instruments 916 VDT 7 bit control mode
21548 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
21550 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
21551 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
21552 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21553 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
21554 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
21555 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
21556 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
21557 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
21558 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
21559 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
21560 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
21561 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
21562 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
21563 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
21566 # Texas Instruments 916 VDT 8 bit control mode
21568 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
21569 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
21570 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
21571 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
21572 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21573 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
21574 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
21576 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
21578 ti916-132|Texas Instruments 916 VDT vt220 132 column,
21579 cols#132, use=ti916,
21581 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
21583 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
21584 cols#132, use=ti916-8,
21585 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
21587 cols#80, it#8, lines#24,
21588 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21589 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
21590 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21591 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21592 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21593 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21594 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
21595 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
21596 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
21597 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
21598 smul=\E[4m, tbc=\E[3g,
21599 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
21601 cols#80, it#8, lines#24,
21602 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21603 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
21604 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21605 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21606 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21607 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21608 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
21609 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
21610 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
21611 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
21612 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21613 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
21614 cols#132, use=ti924,
21615 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
21616 cols#132, use=ti924-8,
21617 ti931|Texas Instruments 931 VDT,
21620 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
21621 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21622 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
21623 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
21624 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21625 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
21626 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
21627 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
21628 sgr0=\E4@, smso=\E4A, smul=\E4D,
21629 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
21630 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
21631 # (ti926-8: I corrected this from the broken SCO entry -- esr)
21632 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
21633 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
21634 ti_ansi|basic entry for ti928,
21635 am, bce, eo, xenl, xon,
21636 colors#8, cols#80, it#8, lines#25, pairs#64,
21637 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
21638 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
21639 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
21640 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
21641 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21642 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
21643 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
21644 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
21645 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
21646 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21647 smso=\E[7m, smul=\E[4m,
21649 # 928 VDT 7 bit control mode
21651 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
21652 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
21653 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
21654 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
21655 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
21656 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
21658 # 928 VDT 8 bit control mode
21660 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
21661 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
21662 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
21663 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
21664 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
21665 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
21666 kpp=\233T, kprt=\23335~, use=ti_ansi,
21671 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
21672 # had just <smso>=\EG6 which I think means standout was supposed to be
21673 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
21674 # <invis> might work-- esr)
21675 zen30|z30|zentec 30,
21678 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
21679 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21680 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
21681 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
21682 smul@, use=adm+sgr,
21683 # (zen50: this had extension capabilities
21684 # :BS=^U:CL=^V:CR=^B:
21685 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
21686 # which were also in the original entry -- esr)
21687 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
21688 zen50|z50|zentec zephyr,
21690 cols#80, lines#24, xmc#1,
21691 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
21692 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
21693 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
21694 rmul@, smul@, use=adm+sgr,
21696 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
21697 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
21700 blink=\EM", clear=\EH\EJ, cnorm=\EP,
21701 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
21702 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
21703 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
21704 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
21705 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
21706 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
21707 smso=\EM$, smul=\EM0,
21709 ######## OBSOLETE UNIX CONSOLES
21712 #### Apollo consoles
21714 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
21715 # labeled HP700s now.
21718 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
21719 apollo|apollo console,
21722 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
21723 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
21724 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
21725 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
21726 smso=\ES, smul=\EU, vpa=\EO+\s,
21728 # We don't know whether or not the apollo guys replicated DEC's firmware bug
21729 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
21730 # both these capabilities.
21731 apollo_15P|apollo 15 inch display,
21732 rmir@, smir@, use=vt132,
21733 apollo_19L|apollo 19 inch display,
21734 rmir@, smir@, use=vt132,
21735 apollo_color|apollo color display,
21736 rmir@, smir@, use=vt132,
21740 # This actually describes the generic SVr4 display driver for Intel boxes.
21741 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
21742 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
21743 att6386|at386|386at|AT&T WGS 6386 console,
21745 cols#80, it#8, lines#25,
21746 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
21747 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
21748 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
21749 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21750 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21751 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21752 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
21753 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
21754 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
21755 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
21756 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
21757 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
21758 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21759 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
21760 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
21761 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
21763 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
21764 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
21765 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
21766 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
21767 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
21768 pc6300plus|AT&T 6300 plus,
21771 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
21772 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
21773 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
21774 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
21775 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
21776 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21777 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
21778 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
21779 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21780 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21782 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
21784 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
21785 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
21786 # is broken. All the special key sequences are broken, making it unusable
21787 # with Emacs. The problem stems from the following:
21789 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
21790 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
21791 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
21792 # uses resizable terminal windows, but the bundled terminal program always
21793 # uses an 80x24 window (and doesn't support seem to support a 132-column
21796 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
21797 # library which was a superset of SVr3.5 curses (called tam, for "terminal
21798 # access method".) tam includes support for real, overlapping windows,
21799 # onscreen function key labels, and bitmap graphics. But since the primary
21800 # user interface on the UNIX PC was a GUI program (ua, for "user
21801 # assistant",) and remote administration was considered important for the
21802 # machine, tam also supported VT100-compatible terminals attached to the
21803 # serial port or used across the StarLan network. To simulate the extra keys
21804 # not present on a VT100, users could press ESC and a two-letter sequence,
21805 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
21806 # however, were not the same as those sent by the actual Undo key. The
21807 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
21808 # (If you're interested in adding some of the tam calls to ncurses, btw, I
21809 # have the full documentation and several programs which use tam. It also
21810 # used an extended terminfo format to describe key sequences, special
21811 # highlighting modes, etc.)
21813 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
21814 # there are two sequences for every key-modifier combination (local keyboard
21815 # sequence and remote "VT100" sequence.) But I doubt many people are trying
21816 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
21817 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
21818 # seem to have been built from the manual describing the VT100 sequences.
21819 # This means it doesn't work for a real live UNIX PC.
21821 # FONTS: The UNIX PC also has a strange interpretation of "alternate
21822 # character set". Rather than the VT100 graphics you might expect, it allows
21823 # up to 8 custom fonts to be loaded at any given time. This means that
21824 # programs expecting VT100 graphics will usually be disappointed. For this
21825 # reason I have disabled the smacs/rmacs sequences, but they could easily be
21826 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
21827 # manpage), should you wish to do so:
21829 # SGR10 - Select font 0 - ESC [ 10 m or SO
21830 # SGR11 - Select font 1 - ESC [ 11 m or SI
21831 # SGR12 - Select font 2 - ESC [ 12 m
21833 # SGR17 - Select font 7 - ESC [ 17 m
21835 # Graphics for line drawing are not reliably found at *any* character
21836 # location because the UNIX PC has dynamically reloadable fonts. I use font
21837 # 0 for regular text and font 1 for italics, but this is by no means
21838 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
21840 # MISC: The cursor visible/cursor invisible sequences were swapped in the
21841 # distributed terminfo.
21843 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
21844 # the UNIX PC terminfo entry. The modified version works great with Lynx,
21845 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
21846 # attached by serial cable. In Emacs, even the Undo key works, and many
21847 # applications can now use the F1-F8 keys.
21850 # Terminfo entry for the AT&T Unix PC 7300
21851 # from escape(7) in Unix PC 7300 Manual.
21852 # Somewhat similar to a vt100-am (but different enough
21853 # to redo this from scratch.)
21855 # /***************************************************************
21857 # * FONT LOADING PROGRAM FOR THE UNIX PC
21859 # * This routine loads a font defined in the file ALTFONT
21860 # * into font memory slot #1. Once the font has been loaded,
21861 # * it can be used as an alternative character set.
21863 # * The call to ioctl with the argument WIOCLFONT is the key
21864 # * to this routine. For more information, see window(7) in
21865 # * the PC 7300 documentation.
21866 # ***************************************************************/
21867 # #include <string.h> /* needed for strcpy call */
21868 # #include <sys/window.h> /* needed for ioctl call */
21869 # #define FNSIZE 60 /* font name size */
21870 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
21872 # * The file /usr/lib/wfont/special.8.ft comes with the
21873 # * standard PC software. It defines a graphics character set
21874 # * similar to that of the Teletype 5425 terminal. To view
21875 # * this or other fonts in /usr/lib/wfont, use the command
21876 # * cfont <filename>. For further information on fonts see
21877 # * cfont(1) in the PC 7300 documentation.
21880 # struct altfdata /* structure for alt font data */
21882 # short altf_slot; /* memory slot number */
21883 # char altf_name[FNSIZE]; /* font name (file name) */
21887 # int wd; /* window in which altfont will be */
21888 # struct altfdata altf;
21889 # altf.altf_slot=1;
21890 # strcpy(altf.altf_name,ALTFONT);
21891 # for (wd =1; wd < 12; wd++) {
21892 # ioctl(wd, WIOCLFONT,&altf);
21896 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
21897 # they're confirmed by the man page for the System V display---esr)
21899 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
21901 cols#80, it#8, lines#24,
21902 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
21903 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
21904 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21905 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21906 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21907 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
21908 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
21909 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
21910 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
21911 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
21912 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
21913 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
21914 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
21915 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
21916 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
21917 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
21918 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
21919 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
21920 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
21921 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
21922 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
21923 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
21926 #### Convergent Technology
21928 # Burroughs bought Convergent shortly before it merged with Univac.
21929 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
21930 # from 1991 or earlier).
21933 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
21934 # (aws: removed unknown :dn=^K: -- esr)
21935 aws|Convergent Technologies AWS workstation under UTX and Xenix,
21937 OTug#0, cols#80, lines#28, xmc#0,
21938 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
21939 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
21940 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
21941 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
21942 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
21943 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
21945 awsc|Convergent Technologies AWS workstation under CTOS,
21947 OTug#0, cols#80, lines#24, xmc#0,
21948 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
21949 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
21950 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
21951 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
21957 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
21958 # The digital uVax II's had a graphic display called a qdss. It was
21959 # supposed to be a high performance graphic accelerator, but it was
21960 # late to market and barely appeared before faster dumb frame buffers
21961 # appeared. I have only used this display while running X11. However,
21962 # during bootup, it was in text mode, and probably had a terminal emulator
21963 # within it. And that is what your termcap entry is for. In graphics
21964 # mode the screen size is 1024x864 pixels.
21965 qdss|qdcons|qdss glass tty,
21967 cols#128, lines#57,
21968 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
21969 cup=\E=%p1%c%p2%c, cuu1=^K,
21971 #### Fortune Systems consoles
21973 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
21974 # in their day; I (esr) used one myself for a year or so around 1984.
21975 # They had no graphics, though, and couldn't compete against Suns and
21979 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
21980 # (This had extension capabilities
21981 # :rv=\EH:re=\EI:rg=0:GG=0:\
21982 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
21983 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
21984 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
21985 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
21986 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
21987 # to force both magic cookie glitches off. Once upon a time, I
21988 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
21989 # function keys; thus the "Al" value for HM was certainly an error. I renamed
21990 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
21991 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
21992 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
21993 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
21994 fos|fortune|Fortune system,
21997 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
21998 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
21999 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22000 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22001 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22002 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
22003 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22004 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22005 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22006 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
22007 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22008 smso=^\H`, smul=^\HP,
22010 #### Masscomp consoles
22012 # Masscomp has gone out of business. Their product line was purchased by
22013 # comany in Georgia (US) called "XS International", parts and service may
22014 # still be available through them.
22017 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22018 masscomp|masscomp workstation console,
22020 cols#80, it#8, lines#24,
22021 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22022 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22023 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22024 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22025 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22026 masscomp1|masscomp large screen version 1,
22027 cols#104, lines#36, use=masscomp,
22028 masscomp2|masscomp large screen version 2,
22029 cols#64, lines#21, use=masscomp,
22034 # OSF/1 1.1 Snapshot 2
22035 pmcons|pmconsole|PMAX console,
22037 cols#128, lines#57,
22038 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
22039 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22040 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22042 #### Other consoles
22043 # The following is a version of the ibm-pc entry distributed with PC/IX,
22044 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22045 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22046 # (the former is untrue, and the latter failed under UCB/man); standout and
22047 # underline modes have been added. Note: this entry describes the "native"
22048 # capabilities of the PC monochrome display, without ANY emulation; most
22049 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22050 pcix|PC/IX console,
22053 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22054 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22055 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22058 # (ibmpcx: this entry used to be known as ibmx.
22059 # It formerly included the following extension capabilities:
22060 # :GC=b:GL=v:GR=t:RT=^J:\
22061 # :GH=\E[196g:GV=\E[179g:\
22062 # :GU=\E[193g:GD=\E[194g:\
22063 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22064 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22065 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22066 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22067 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22068 # what was there before. -- esr)
22069 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22072 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22073 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22074 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22075 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22076 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22077 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22079 ######## OTHER OBSOLETE TYPES
22081 # These terminals are *long* dead -- these entries are retained for
22082 # historical interest only.
22085 #### Obsolete non-ANSI software emulations
22088 # CTRM terminal emulator
22089 # 1. underlining is not allowed with colors: first, is is simulated by
22090 # black on white, second, it disables background color manipulations.
22091 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22092 # so we have to save their status in the static registers A, B and H
22093 # respectively, to be able to restore them when color changes
22094 # (because any color change turns off ALL attributes)
22095 # 3. <bold> and <rev> sequences alternate modes,
22096 # rather than simply entering them. Thus we have to check the
22097 # static register B and H to determine the status, before sending the
22099 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22100 # and then reset colors
22101 # 5. implementation of the protect mode would badly penalize the performance.
22102 # we would have to use \E&bn sequence to turn off colors (as well as all
22103 # other attributes), and keep the status of protect mode in yet another
22104 # static variable. If someone really needs this mode, they would have to
22105 # create another terminfo entry.
22106 # 6. original color-pair is white on black.
22107 # store the information about colors into static registers
22108 # 7. set foreground color. it performs the following steps.
22109 # 1) turn off all attributes
22110 # 2) turn on the background and video attributes that have been turned
22111 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22112 # 3) turn on foreground attributes
22113 # 4) store information about foreground into U,V,W static registers
22114 # 8. turn on background: similar to turn on foreground above
22115 ctrm|C terminal emulator,
22117 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22118 pairs#63, pb#19200, vt#6,
22119 bel=^G, blink=\E&dA%{1}%PA,
22120 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22121 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
22122 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22123 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22124 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22125 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22126 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22127 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22128 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22130 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22131 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22132 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22133 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22134 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22135 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22136 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22137 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22138 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22139 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22140 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22142 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22143 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22145 # gs6300 - can't use blue foreground, it clashes with underline;
22146 # it's simulated with cyan
22147 # Bug: The <op> capability probably resets attributes.
22148 # (gs6300: commented out <rmln> (no <smln>) --esr)
22149 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22150 am, bce, msgr, xon,
22151 colors#8, cols#80, it#8, lines#24, pairs#63,
22152 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22154 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
22155 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
22156 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22157 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22158 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22159 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
22160 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22161 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22162 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22163 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22164 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22165 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22166 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22168 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22169 # MS-Kermit with Heath-19 emulation mode enabled
22170 # (h19k: changed ":pt@:" to ":it@"
22171 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22176 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22177 # Software (formerly Peripherals Computers & Supplies, Inc) of
22178 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22179 # also be reached at support@synergy.com.
22180 versaterm|versaterm vt100 emulator for the macintosh,
22182 cols#80, it#8, lines#24,
22183 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22184 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
22185 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
22186 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22187 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22188 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22189 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22190 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22191 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
22192 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22193 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22194 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22197 # From: Rick Thomas <ihnp4!btlunix!rbt>
22198 # (xtalk: I added <rmam>/<smam> based on the init string.
22199 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22200 am, mir, msgr, xon,
22201 cols#80, it#8, lines#24, vt#3, xmc#1,
22202 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22203 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
22204 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22205 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22206 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22207 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22208 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22209 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22210 rmkx=\E[?1l\E>, rmso=\E[m\s,
22211 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22212 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22213 tbc=\E[3g, use=vt100+fnkeys,
22215 # The official PC terminal emulator program of the AT&T Product Centers.
22216 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22217 simterm|attpc running simterm,
22220 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
22221 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22222 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
22223 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22225 #### Daisy wheel printers
22227 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22228 # wheel terminals. These are now largely obsolete.
22231 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22232 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22235 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
22236 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22237 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22239 is2=\r \E9, use=diablo1620,
22240 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22241 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22242 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22244 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22246 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22248 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22249 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22251 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
22252 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
22253 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
22254 # If no tab is set or the terminal's in a bad mood, it glitches the screen
22255 # around all of memory. Note that return puts a blank ("a return character")
22256 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
22257 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
22258 # curses won't work (some old BSD versions) because it doesn't clear this bit,
22259 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
22260 # I have been unable to get tabs set in all 96 lines - it always leaves at
22261 # least one line with no tabs in it, and once you tab through that line,
22262 # it completely weirds out.
22263 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
22266 cols#80, lines#24, lm#96,
22267 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
22268 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
22269 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
22270 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
22271 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
22275 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22276 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
22277 gsi|mystery gsi terminal,
22280 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
22282 aj830|aj832|aj|anderson jacobson,
22284 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
22286 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
22287 aj510|Anderson-Jacobson model 510,
22290 clear=^L, cub1=^H, cuf1=\EX,
22291 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
22292 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
22293 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
22294 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
22295 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
22297 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
22298 # This is incomplete, but it's a start.
22299 nec5520|nec|spinwriter|nec 5520,
22302 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
22303 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
22305 qume5|qume|Qume Sprint 5,
22308 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22309 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
22310 # I suspect the xerox 1720 is the same as the diablo 1620.
22311 xerox1720|x1720|x1750|xerox 1720,
22314 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
22317 #### Miscellaneous obsolete terminals, manufacturers unknown
22319 # If you have any information about these (like, a manufacturer's name,
22320 # and a date on the serial-number plate) please send it!
22322 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
22325 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
22326 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
22329 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
22330 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
22331 kf4=\E8, rmso=\Em^C, smso=\Em^L,
22332 cops10|cops|cops-10|cops 10,
22335 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
22336 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
22337 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
22339 # (d132: removed duplicate :ic=\E5:,
22340 # merged in capabilities from a BRL entry -- esr)
22341 d132|datagraphix|datagraphix 132a,
22344 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
22345 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
22346 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
22347 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
22348 # The d800 was an early portable terminal from c.1984-85 that looked a lot
22349 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
22350 # mode (which is what this entry looks like) and several other lesser-known
22353 OTbs, am, da, db, msgr, xhp,
22354 cols#80, it#8, lines#24,
22355 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22356 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
22357 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
22358 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
22359 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22360 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
22361 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22362 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
22363 digilog|digilog 333,
22366 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
22368 # The DWK was a terminal manufactured in the Soviet Union c.1986
22369 dwk|dwk-vt|dwk terminal,
22371 cols#80, it#8, lines#24,
22372 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
22374 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
22375 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
22376 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
22377 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
22378 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
22379 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
22380 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
22381 sgr0=\EX, smacs=\EF, smso=\ET,
22382 env230|envision230|envision 230 graphics terminal,
22384 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
22385 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22387 sgr0=\E[0m$<2>, smacs@, use=vt100,
22388 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
22389 # coupler attached, the whole rig fitting in a suitcase and more or less
22390 # portable. Hot stuff for c.1977 :-) -- esr
22391 ep48|ep4080|execuport 4080,
22394 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
22395 ep40|ep4000|execuport 4000,
22396 cols#136, use=ep4080,
22397 # Adam Thompson <athompso@pangea.ca> tells us:
22398 # Informer series - these are all portable units, resembling older
22399 # automatic bread-baking machines. The terminal looks like a `clamshell'
22400 # design, but isn't. The structure is similar to the Direct terminals,
22401 # but only half the width. The entire unit is only about 10" wide.
22402 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
22403 # keyboard. All the keys are crammed together, much like some laptop
22404 # PCs today, but perhaps less well organized...all these units have a
22405 # bewildering array of plugs on the back, including a built-in modem.
22406 # The 305 was a color version of the 304; the 306 and 307 were mono and
22407 # color terminals built for IBM bisync protocols.
22408 # From: Paul Leondis <unllab@amber.berkeley.edu>
22409 ifmr|Informer D304,
22412 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
22413 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
22414 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
22416 # Entry largely based on wy60 and has the features of wy60ak.
22417 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
22418 am, bw, hs, km, mir, msgr, ul, xon,
22419 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
22420 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
22421 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
22422 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
22423 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
22424 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
22425 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
22427 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
22428 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
22430 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
22431 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
22432 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
22433 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
22434 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
22435 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
22436 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
22437 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
22438 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
22439 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
22440 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
22441 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
22442 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
22443 rs3=\EwG\Ee($<150>,
22444 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
22445 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
22446 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
22447 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
22448 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
22450 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
22451 uc=\EG8\EG0, use=adm+sgr,
22452 teletec|Teletec Datascreen,
22455 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
22457 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
22458 # This description is for the LANPAR Technologies VISION 3220
22459 # terminal from 1984/85. The function key definitions k0-k5 represent the
22460 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
22461 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
22463 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
22464 # I had a couple of scopes (3221) like this once where I used to work, around
22465 # the 1987 time frame if memory serves me correctly. These scopes were made
22466 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
22467 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
22468 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
22469 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
22470 # (3221) cost about $1500 each, and one was always broken -- had to be sent
22471 # back to the shop for repairs.
22472 # The only real advantage these scopes had over the VT-240's were:
22473 # 1) They were faster in the Regis display, or at least the ones I did
22474 # 2) They had a handy debugging feature where you could split-screen the
22475 # scope, the graphics would appear on the top, and the REGIS commands would
22476 # appear on the bottom. I don't remember the VT-240s being able to do that.
22477 # I would swear that LANPAR Technologies was in MA someplace, but since I
22478 # don't work at the same place anymore, and those terminals and manuals were
22479 # long since junked, I cannot be any more sure than that.
22481 # (v3220: removed obsolete ":kn#10:",
22482 # I added <rmam>/<smam> based on the init string -- esr)
22483 v3220|LANPAR Vision II model 3220/3221/3222,
22484 OTbs, am, mir, xenl,
22485 cols#80, it#8, lines#24,
22486 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22487 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22488 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
22489 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
22490 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
22491 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
22492 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
22493 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22494 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
22495 ######## ICH/ICH1 VERSUS RMIR/SMIR
22497 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
22498 # are present; the symptom is doubled characters in an update using insert.
22499 # These applications are technically correct; in both 4.3BSD termcap and
22500 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
22501 # unless the terminal needs both. To my knowledge, no terminal still in this
22502 # file requires both other than the very obsolete dm2500.
22504 # For ncurses-based applications this is not a problem, as ncurses uses
22505 # one or the other as appropriate but never mixes the two. Therefore we
22506 # have not corrected entries like `linux' and `xterm' that specify both.
22507 # If you see doubled characters from these, use the linux-nic and xterm-nic
22508 # entries that suppress ich/ich1. And upgrade to ncurses!
22511 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
22513 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
22514 # ECMA-48 standards are said to be almost identical, but are not the same
22515 # as X3.64 (though for practical purposes they are close supersets of it).
22517 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
22518 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
22519 # Coded Character Sets"), include your snail-mail address, and you should
22520 # receive the document in due course. Don't expect an email acknowledgement.
22522 # Related standards include "X3.4-1977: American National Standard Code for
22523 # Information Interchange" (the ASCII standard) and "X3.41.1974:
22524 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
22525 # American National Standard for Information Interchange." I believe (but
22526 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
22530 #### VT100/ANSI/ECMA-48
22532 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
22533 # and ECMA-48 Control Functions for Coded Character Sets.
22535 # Much of the content of this comment is adapted from a table prepared by
22536 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
22537 # discussion of some terminfo-related issues, and updates to capture ECMA-48
22538 # have been added. Control functions described in ECMA-48 only are tagged
22539 # with * after their names.
22541 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
22542 # sequences. In the main table, \E stands for an escape (\033) character,
22543 # SPC for space. Pn stands for a single numeric parameter to be inserted
22544 # in decimal ASCII. Ps stands for a list of such parameters separated by
22545 # semicolons. Parameter meanings for most parametrized sequences are
22546 # decribed in the notes.
22548 # Sequence Sequence Parameter or
22549 # Mnemonic Name Sequence Value Mode terminfo
22550 # -----------------------------------------------------------------------------
22551 # APC Applicatn Program Command \E _ - Delim -
22552 # BEL Bell * ^G - - bel
22553 # BPH Break Permitted Here * \E B - * -
22554 # BS Backpace * ^H - EF -
22555 # CAN Cancel * ^X - - - (A)
22556 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
22557 # CCH Cancel Previous Character \E T - - -
22558 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
22559 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
22560 # CMD Coding Method Delimiter * \E
22561 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
22562 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
22563 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
22564 # CSI Control Sequence Intro \E [ - Intro -
22565 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
22566 # CUB Cursor Backward \E [ Pn D 1 eF cub
22567 # CUD Cursor Down \E [ Pn B 1 eF cud
22568 # CUF Cursor Forward \E [ Pn C 1 eF cuf
22569 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
22570 # CUU Cursor Up \E [ Pn A 1 eF cuu
22571 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
22572 # DA Device Attributes \E [ Pn c 0 - -
22573 # DAQ Define Area Qualification \E [ Ps o 0 - -
22574 # DCH Delete Character \E [ Pn P 1 eF dch
22575 # DCS Device Control String \E P - Delim -
22576 # DL Delete Line \E [ Pn M 1 eF dl
22577 # DLE Data Link Escape * ^P - - -
22578 # DMI Disable Manual Input \E \ - Fs -
22579 # DSR Device Status Report \E [ Ps n 0 - - (I)
22580 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
22581 # EA Erase in Area \E [ Ps O 0 eF - (J)
22582 # ECH Erase Character \E [ Pn X 1 eF ech
22583 # ED Erase in Display \E [ Ps J 0 eF ed (J)
22584 # EF Erase in Field \E [ Ps N 0 eF -
22585 # EL Erase in Line \E [ Ps K 0 eF el (J)
22586 # EM End of Medium * ^Y - - -
22587 # EMI Enable Manual Input \E b Fs -
22588 # ENQ Enquire ^E - - -
22589 # EOT End Of Transmission ^D - * -
22590 # EPA End of Protected Area \E W - - - (K)
22591 # ESA End of Selected Area \E G - - -
22592 # ESC Escape ^[ - - -
22593 # ETB End Transmission Block ^W - - -
22594 # ETX End of Text ^C - - -
22595 # FF Form Feed ^L - - -
22596 # FNK Function Key * \E [ Pn SPC W - - -
22597 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
22598 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
22599 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
22600 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
22601 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
22602 # HPB Char Position Backward \E [ j 1 FE -
22603 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
22604 # HT Horizontal Tab * ^I - FE - (N)
22605 # HTJ Horz Tab w/Justification \E I - FE -
22606 # HTS Horizontal Tab Set \E H - FE hts
22607 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
22608 # ICH Insert Character \E [ Pn @ 1 eF ich
22609 # IDCS ID Device Control String \E [ SPC O - * -
22610 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
22611 # IL Insert Line \E [ Pn L 1 eF il
22612 # IND Index \E D - FE -
22613 # INT Interrupt \E a - Fs -
22614 # JFY Justify \E [ Ps SPC F 0 FE -
22615 # IS1 Info Separator #1 * ^_ - * -
22616 # IS2 Info Separator #1 * ^^ - * -
22617 # IS3 Info Separator #1 * ^] - * -
22618 # IS4 Info Separator #1 * ^\ - * -
22619 # LF Line Feed ^J - - -
22620 # LS1R Locking Shift Right 1 * \E ~ - - -
22621 # LS2 Locking Shift 2 * \E n - - -
22622 # LS2R Locking Shift Right 2 * \E } - - -
22623 # LS3 Locking Shift 3 * \E o - - -
22624 # LS3R Locking Shift Right 3 * \E | - - -
22625 # MC Media Copy \E [ Ps i 0 - - (S)
22626 # MW Message Waiting \E U - - -
22627 # NAK Negative Acknowledge * ^U - * -
22628 # NBH No Break Here * \E C - - -
22629 # NEL Next Line \E E - FE nel (D)
22630 # NP Next Page \E [ Pn U 1 eF -
22631 # NUL Null * ^@ - - -
22632 # OSC Operating System Command \E ] - Delim -
22633 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
22634 # PFS Page Format Selection * \E Pn SPC J 0 - -
22635 # PLD Partial Line Down \E K - FE - (T)
22636 # PLU Partial Line Up \E L - FE - (U)
22637 # PM Privacy Message \E ^ - Delim -
22638 # PP Preceding Page \E [ Pn V 1 eF -
22639 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
22640 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
22641 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
22642 # PTX Parallel Texts * \E [ \ - - -
22643 # PU1 Private Use 1 \E Q - - -
22644 # PU2 Private Use 2 \E R - - -
22645 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
22646 # REP Repeat Char or Control \E [ Pn b 1 - rep
22647 # RI Reverse Index \E M - FE - (V)
22648 # RIS Reset to Initial State \E c - Fs -
22649 # RM Reset Mode * \E [ Ps l - - - (W)
22650 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
22651 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
22652 # SCI Single-Char Introducer \E Z - - -
22653 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
22654 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
22655 # SD Scroll Down \E [ Pn T 1 eF rin
22656 # SDS Start Directed String * \E [ Pn ] 1 - -
22657 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
22658 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
22659 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
22660 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
22661 # SI Shift In ^O - - - (P)
22662 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
22663 # SL Scroll Left \E [ Pn SPC @ 1 eF -
22664 # SLH Set Line Home * \E [ Pn SPC U - - -
22665 # SLL Set Line Limit * \E [ Pn SPC V - - -
22666 # SLS Set Line Spacing * \E [ Pn SPC h - - -
22667 # SM Select Mode \E [ Ps h none - - (W)
22668 # SO Shift Out ^N - - - (Q)
22669 # SOH Start Of Heading * ^A - - -
22670 # SOS Start of String * \E X - - -
22671 # SPA Start of Protected Area \E V - - - (Z)
22672 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
22673 # SPH Set Page Home * \E [ Ps SPC G - - -
22674 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
22675 # SPL Set Page Limit * \E [ Ps SPC j - - -
22676 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
22677 # SR Scroll Right \E [ Pn SPC A 1 eF -
22678 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
22679 # SRS Start Reversed String * \E [ Ps [ 0 - -
22680 # SSA Start of Selected Area \E F - - -
22681 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
22682 # SSW Set Space Width * \E [ Pn SPC [ none - -
22683 # SS2 Single Shift 2 (G2 set) \E N - Intro -
22684 # SS3 Single Shift 3 (G3 set) \E O - Intro -
22685 # ST String Terminator \E \ - Delim -
22686 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
22687 # STS Set Transmit State \E S - - -
22688 # STX Start pf Text * ^B - - -
22689 # SU Scroll Up \E [ Pn S 1 eF indn
22690 # SUB Substitute * ^Z - - -
22691 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
22692 # SYN Synchronous Idle * ^F - - -
22693 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
22694 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
22695 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
22696 # TBC Tab Clear \E [ Ps g 0 FE tbc
22697 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
22698 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
22699 # TSS Thin Space Specification \E [ Pn SC E none FE -
22700 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
22701 # VPB Line Position Backward * \E [ Pn k 1 FE -
22702 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
22703 # VT Vertical Tabulation * ^K - FE -
22704 # VTS Vertical Tabulation Set \E J - FE -
22706 # ---------------------------------------------------------------------------
22710 # Some control characters are listed in the ECMA-48 standard without
22711 # being assigned functions relevant to terminal control there (they
22712 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
22713 # here anyway for completeness.
22715 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
22717 # (B) There seems to be some confusion abroad between CHA and HPA. Most
22718 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
22719 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
22720 # preserved the CHA abbreviation.
22722 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
22723 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
22724 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
22725 # CHT abbreviation.
22727 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
22729 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
22732 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
22733 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
22734 # 5 = clear all char tabs, 6 = clear all line tabs.
22736 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
22737 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
22738 # Position Absolute" but retains the HVP abbreviation.
22740 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
22743 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
22744 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
22745 # DSR, 6 = request CPR response.
22747 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
22748 # 1 = clear from beginning, 2 = clear.
22750 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
22752 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
22754 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
22755 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
22756 # Position Relative" but retains the HPR abbreviation.
22758 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
22761 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
22762 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
22763 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
22764 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
22765 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
22766 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
22767 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
22768 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
22769 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
22770 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
22771 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
22772 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
22773 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
22774 # 61-65 = variable highlights for ideograms.
22776 # (P) SI is also called LSO, Locking Shift Zero.
22778 # (Q) SI is also called LS1, Locking Shift One.
22780 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
22781 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
22782 # Absolute' but retains the VPA abbreviation.
22784 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
22785 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
22786 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
22787 # start relay to primary aux device, 6 = stop relay to secondary aux device,
22788 # 7 = start relay to secondary aux device.
22790 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
22793 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
22796 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
22798 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
22799 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
22800 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
22801 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
22802 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
22803 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
22804 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
22805 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
22806 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
22807 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
22808 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
22809 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
22810 # from ECMA-48's 5th edition but are listed here for reference.
22812 # (X) Select Alternate Presentation Variants is used only for non-Latin
22815 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
22817 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
22820 # ---------------------------------------------------------------------------
22824 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
22825 # X3.64 Control Sequence Introducer is the two characters "Escape ["
22827 # Delim a Delimiter
22829 # x/y identifies a character by position in the ASCII table (column/row)
22831 # eF editor function (see explanation)
22833 # FE format effector (see explanation)
22835 # F is a Final character in
22836 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
22837 # a control sequence (F from 4/0 to 7/14)
22839 # Gs is a graphic character appearing in strings (Gs ranges from
22840 # 2/0 to 7/14) in the ASCII table
22842 # Ce is a control represented as a single bit combination in the C1 set
22843 # of controls in an 8-bit character set
22845 # C0 the familiar set of 7-bit ASCII control characters
22847 # C1 roughly, the set of control chars available only in 8-bit systems.
22848 # This is too complicated to explain fully here, so read Jim Fleming's
22849 # article in the February 1983 BYTE, especially pages 214 through 224.
22851 # Fe is a Final character of a 2-character Escape sequence that has an
22852 # equivalent representation in an 8-bit environment as a Ce-type
22853 # (Fe ranges from 4/0 to 5/15)
22855 # Fs is a Final character of a 2-character Escape sequence that is
22856 # standardized internationally with identical representation in 7-bit
22857 # and 8-bit environments and is independent of the currently
22858 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
22860 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
22863 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
22866 # Pn is a numeric parameter in a control sequence, a string of zero or
22867 # more characters ranging from 3/0 to 3/9 in the ASCII table
22869 # Ps is a variable number of selective parameters in a control sequence
22870 # with each selective parameter separated from the other by the code
22871 # 3/11 (which usually represents a semicolon); Ps ranges from
22872 # 3/0 to 3/9 and includes 3/11
22874 # * Not relevant to terminal control, listed for completeness only.
22876 # Format Effectors versus Editor Functions
22878 # A format effector specifies how following output is to be displayed.
22879 # An editor function allows you to modify the display. Informally
22880 # format effectors may be destructive; format effectors should not be.
22882 # For instance, a format effector that moves the "active position" (the
22883 # cursor or equivalent) one space to the left would be useful when you want to
22884 # create an overstrike, a compound character made of two standard characters
22885 # overlaid. Control-H, the Backspace character, is actually supposed to be a
22886 # format effector, so you can do this. But many systems use it in a
22887 # nonstandard fashion, as an editor function, deleting the character to the
22888 # left of the cursor and moving the cursor left. When Control-H is assumed to
22889 # be an editor function, you cannot predict whether its use will create an
22890 # overstrike unless you also know whether the output device is in an "insert
22891 # mode" or an "overwrite mode". When Control-H is used as a format effector,
22892 # its effect can always be predicted. The familiar characters carriage
22893 # return, linefeed, formfeed, etc., are defined as format effectors.
22895 # NOTES ON THE DEC VT100 IMPLEMENTATION
22897 # Control sequences implemented in the VT100 are as follows:
22899 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
22900 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
22902 # plus several private DEC commands.
22904 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
22906 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
22907 # Erase from beginning of line to cursor Esc [ 1 K
22908 # Erase line containing cursor Esc [ 2 K
22909 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
22910 # Erase from beginning of screen to cursor Esc [ 1 J
22911 # Erase entire screen Esc [ 2 J
22913 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
22914 # Esc [ 2 J, but this is wrong; the default is 0.
22916 # The VT100 responds to receiving the DA (Device Attributes) control
22918 # Esc [ c (or Esc [ 0 c)
22920 # by transmitting the sequence
22924 # where Ps is a character that describes installed options.
22926 # The VT100's cursor location can be read with the DSR (Device Status
22931 # The VT100 reports by transmitting the CPR sequence
22935 # where Pl is the line number and Pc is the column number (in decimal).
22937 # The specification for the DEC VT100 is document EK-VT100-UG-003.
22941 # Here is a description of the color and attribute controls supported in the
22942 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
22943 # terminal emulators for Intel boxes obey these. They are a proper subset
22944 # of the ECMA-48 escapes.
22946 # 0 all attributes off
22947 # 1 foreground bright
22949 # 5 blink on/background bright (not reliable with brown)
22951 # 8 set blank (non-display)
22952 # 10 set primary font
22953 # 11 set first alternate font (on PCs, display ROM characters 1-31)
22954 # 12 set second alternate font (on PCs, display IBM high-half chars)
22956 # Color attribute sets
22957 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
22958 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
22959 # Bright black becomes gray. Bright brown becomes yellow,
22960 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
22962 # * If the 5 attribute is on and you set a background color (40-47) it is
22963 # supposed to enable bright background.
22965 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
22966 # when you try to set a "bright brown" (yellow) background with attribute
22967 # 5 (you get a blinking yellow foreground instead). A few displays
22968 # (including the System V console) support an attribute 6 that undoes this
22969 # braindamage (this is required by iBCS2).
22971 # * Some older versions of ANSI.SYS have a bug that causes thems to require
22972 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
22975 #### Intel Binary Compatibility Standard
22977 # For comparison, here are the capabilities implied by the Intel Binary
22978 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
22979 # These recommendations are optional. IBCS2 allows the leading escape to
22980 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
22981 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
22982 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
22983 # terminfo entry are followed with the corresponding capability in parens:
22985 # CSI <n>k disable (n=0) or enable (n=1) keyclick
22986 # CSI 2h lock keyboard
22987 # CSI 2i send screen as input
22988 # CSI 2l unlock keyboard
22989 # CSI 6m enable background color intensity
22990 # CSI <0-2>c reserved
22991 # CSI <0-59>m select graphic rendition
22992 # CSI <n>;<m>H (cup) cursor to line n and column m
22993 # CSI <n>;<m>f cursor to line n and column m
22994 # CSI <n>@ (ich) insert characters
22995 # CSI <n>A (cuu) cursor up n lines
22996 # CSI <n>B (cud) cursor down n lines
22997 # CSI <n>C (cuu) cursor right n characters
22998 # CSI <n>D (cud) cursor left n characters
22999 # CSI <n>E cursor down n lines and in first column
23000 # CSI <n>F cursor up n lines and in first column
23001 # CSI <n>G (hpa) position cursor at column n-1
23002 # CSI <n>J (ed) erase in display
23003 # CSI <n>K (el) erase in line
23004 # CSI <n>L (il) insert line(s)
23005 # CSI <n>P (dch) delete characters
23006 # CSI <n>S (indn) scroll up n lines
23007 # CSI <n>T (rin) scroll down n lines
23008 # CSI <n>X (ech) erase characters
23009 # CSI <n>Z (cbt) back up n tab stops
23010 # CSI <n>` cursor to column n on line
23011 # CSI <n>a (cuu) cursor right n characters
23012 # CSI <n>d (vpa) cursor to line n
23013 # CSI <n>e cursor down n lines and in first column
23014 # CSI <n>g (cbt) clear all tabs
23015 # CSI <n>z make virtual terminal n active
23016 # CSI ?7h (smam) turn automargin on
23017 # CSI ?7l (rmam) turn automargin off
23018 # CSI s save cursor position
23019 # CSI u restore cursor position to saved value
23020 # CSI =<c>A set overscan color
23021 # CSI =<c>F set normal foreground color
23022 # CSI =<c>G set normal background color
23023 # CSI =<c>H set reverse foreground color
23024 # CSI =<c>I set reverse foreground color
23025 # CSI =<c>J set graphic foreground color
23026 # CSI =<c>K set graphic foreground color
23027 # CSI =<n>g (dispc) display n from alternate graphics character set
23028 # CSI =<p>;<d>B set bell parameters
23029 # CSI =<s>;<e>C set cursor parameters
23030 # CSI =<x>D enable/disable intensity of background color
23031 # CSI =<x>E set/clear blink vs. bold background
23032 # CSI 7 (sc) (sc) save cursor position
23033 # CSI 8 (rc) (rc) restore cursor position to saved value
23034 # CSI H (hts) (hts) set tab stop
23035 # CSI Q<n><string> define function key string
23036 # (string must begin and end with delimiter char)
23037 # CSI c (clear) clear screen
23039 # The lack of any specification for attributes in SGR (among other things)
23040 # makes this a wretchedly weak standard. The table above is literally
23041 # everything iBSC2 has to say about terminal escape sequences; there is
23042 # no further discussion of their meaning or how to set the parameters
23043 # in these sequences at all.
23046 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23048 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23049 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23050 # with the extension names chosen for compatibility with the termcap names
23051 # assigned in System V terminfo. There are some variant extension sets out
23052 # there. We try to describe them here.
23054 #### XENIX extensions:
23056 # The XENIX extensions include a set of function-key capabilities as follows:
23058 # code XENIX variable name terminfo name name clashes?
23059 # ---- ------------------- ------------- -----------------------
23061 # CR key_char_right
23062 # CW key_change_window create_window
23064 # HM key_home khome
23066 # LD key_delete_line kdl1
23067 # LF key_linefeed label_off
23068 # NU key_next_unlocked_cell
23069 # PD key_page_down knp
23071 # PN start_print mc5
23073 # PS stop_print mc4
23074 # PU key_page_up kpp pulse
23075 # RC key_recalc remove_clock
23076 # RF key_toggle_ref req_for_input
23077 # RT key_return kent
23078 # UP key_up_arrow kcuu1 parm_up_cursor
23080 # WR key_word_right
23082 # The XENIX extensions also include the following character-set and highlight
23085 # XENIX terminfo function
23086 # ----- -------- ------------------------------
23087 # GS smacs start alternate character set
23088 # GE rmacs end alternate character set
23089 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23090 # bo blink begin blink (not used in /etc/termcap)
23091 # be end blink (not used in /etc/termcap)
23092 # bb blink glitch (not used in /etc/termcap)
23093 # it dim begin dim (not used in /etc/termcap)
23094 # ie end dim (not used in /etc/termcap)
23095 # ig dim glitch (not used in /etc/termcap)
23097 # Finally, XENIX also used the following forms-drawing capabilities:
23099 # single double type ASCII approximation
23100 # ------ ------ ------------- -------------------
23101 # GV Gv vertical line |
23102 # GH Gv horizontal line - _
23103 # G1 G5 top right corner _ |
23104 # G2 G6 top left corner |
23105 # G3 G7 bottom left corner |_
23106 # G4 G8 bottom right corner _|
23107 # GD Gd down-tick character T
23108 # GL Gl left-tick character -|
23109 # GR Gr right-tick character |-
23110 # GC Gc middle intersection -|-
23111 # GU Gu up-tick character _|_
23113 # These were invented to take advantage of the IBM PC ROM character set. One
23114 # can compose an acsc string from the single-width characters as follows
23115 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23116 # When translating a termcap file, ncurses tic will do this automatically.
23117 # The double forms characters don't fit the SVr4 terminfo model.
23119 #### AT&T Extensions:
23121 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23122 # nonstandard capabilities. Its signature is the KM capability, used to name
23123 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23124 # set. Comments in the original, and a little cross-checking with other AT&T
23125 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23126 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23127 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23128 # cursor invisible), and CV=:ve: (make cursor normal).
23132 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23133 # have the System V capabilities up to SVr1 level. After that, it supports
23134 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23135 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23136 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23137 # HP binary format incompatible with SVr4's.
23139 #### IBM Extensions
23141 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23142 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23143 # capabilities following prtr_non with the following special capabilties:
23144 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23145 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23146 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23147 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23148 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23149 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23150 # correspond to acsc chars, here is the mapping:
23152 # box1[0] = ACS_ULCORNER
23153 # box1[1] = ACS_HLINE
23154 # box1[2] = ACS_URCORNER
23155 # box1[3] = ACS_VLINE
23156 # box1[4] = ACS_LRCORNER
23157 # box1[5] = ACS_LLCORNER
23158 # box1[6] = ACS_TTEE
23159 # box1[7] = ACS_RTEE
23160 # box1[8] = ACS_BTEE
23161 # box1[9] = ACS_LTEE
23162 # box1[10] = ACS_PLUS
23164 # The box2 characters are the double-line versions of these forms graphics.
23165 # The AIX binary terminfo format is incompatible with SVr4's.
23167 #### Iris console extensions:
23169 # HS is half-intensity start; HE is half-intensity end
23170 # CT is color terminal type (for Curses & rogue)
23171 # CP is color change escape sequence
23172 # CZ are color names (for Curses & rogue)
23174 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23176 #### TC Extensions:
23178 # There is a set of extended termcaps associated with something
23179 # called the "Terminal Control" or TC package created by MainStream Systems,
23180 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23181 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23182 # that flags color terminals.
23184 ######## NCURSES USER-DEFINABLE CAPABILITIES
23186 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
23187 # infocmp to manipulate user-definable capabilities. Those that are intended
23188 # for use in either terminfo or termcap use 2-character names. Extended
23189 # function keys do not use 2-character names, and are available only with
23192 # As of mid-2012, no other terminfo/termcap implementation than ncurses
23193 # supports this extension; termcap libraries can as noted above make limited
23194 # use of the feature.
23196 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
23199 #### SCREEN Extensions:
23201 # The screen program uses the termcap interface. It recognizes a few useful
23202 # nonstandard capabilities. Those are used in this file.
23204 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
23206 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
23207 # E0 (str) Switch charset 'G0' back to standard charset.
23208 # S0 (str) Switch charset 'G0' to the specified charset.
23209 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
23212 # AX is relatively straightforward; it is interpreted by ncurses to say that
23213 # SGR 39/49 reset the terminal's foreground and background colors to their
23216 # XT is harder, since screen's manpage does not give more details. For that,
23217 # we must read screen's source-code. When XT is set, screen assumes
23219 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
23220 # screen may also set the terminal's name, which is (for xterm) distinct
23221 # from the icon name.
23222 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
23223 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
23224 # this is an rxvt feature.
23225 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
23226 # These are from xterm, although xterm accepts mouse codes that may not be
23227 # recognized by screen, e.g., 1005, 1006.
23228 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
23229 # sequence. However, because screen uses only termcap, the values returned
23230 # by Af/Ab are not usable because they rely on expressions that termcap
23231 # does not support. Therefore, screen uses a hardcoded string to work
23232 # around the limitation.
23233 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
23235 # The other ISO-2022 features are rarely used, but provided here to make
23236 # screen's termcap features available.
23238 #### XTERM Extensions:
23240 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
23241 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
23242 # additional function-key strings. Some other developers copied the feature,
23243 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
23244 # these key definitions less ambiguous.
23246 # A few terminals provide similar functionality (sending distinct keys when
23247 # a modifier is used), including rxvt.
23249 # These are the extended keys defined in this file:
23251 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
23252 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
23253 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
23254 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
23256 # Here are the other xterm-related extensions which are used in this file:
23258 # Cr is a string capability which resets the cursor color
23259 # Cs is a string capability which sets the cursor color to a given value.
23260 # The single string parameter is the color name/number, according to the
23262 # Ms modifies the selection/clipboard. Its parameters are
23263 # p1 = the storage unit (clipboard, selection or cut buffer)
23264 # p2 = the base64-encoded clipboard content.
23265 # Se resets the cursor style to the terminal power-on default.
23266 # Ss is a string capability with one numeric parameter. It is used to set the
23267 # cursor style as described by the DECSCUSR function to a block or
23269 # TS is a string capability which acts like "tsl", but uses no parameter and
23270 # goes to the first column of the "status line".
23271 # XM is a string capability which overrides ncurses's built-in string which
23272 # enables/disables xterm mouse mode.
23273 # xm shows the format of the mouse responses. Parameters are (from zero):
23277 # p4 = state, e.g., pressed or released
23278 # p6 = y-ordinate starting region
23279 # p7 = x-ordinate starting region
23280 # p8 = y-ordinate ending region
23281 # p9 = x-ordinate ending region
23282 # Other extensions, used in xm:
23285 #### Miscellaneous extensions:
23287 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
23288 # This was implemented for the Hurd.
23289 # E3 clears the terminal's scrollback buffer. This was implemented in the
23290 # Linux 3.0 kernel as a security feature. It matches a feature which was
23291 # added in xterm patch #107.
23292 # U8 is a numeric capability which denotes a terminal emulator which does not
23293 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
23294 # value to enable it.
23296 ######## CHANGE HISTORY
23298 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
23299 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
23300 # maintained by Eric S. Raymond as part of the ncurses project.
23302 # This file contains all the capability information present in John Kunze's
23303 # last version of the termcap master file, except as noted in the change
23304 # comments at end of file. Some information about very ancient obsolete
23305 # capabilities has been moved to comments. Some all-numeric names of older
23306 # terminals have been retired.
23308 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
23309 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
23310 # used by BSD curses.
23312 # The 9.1.0 version of this file was translated from my lightly-edited copy of
23313 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
23314 # the purpose. Unless the ncurses tic implementation and the Lisp code were
23315 # making perfectly synchronized mistakes which I then failed to catch by
23316 # eyeball, the translation was correct and perfectly information-preserving.
23318 # Major version number bumps correspond to major version changes in ncurses.
23320 # Here is a log of the changes since then:
23322 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
23323 # * First terminfo master translated from 8.3.
23324 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
23325 # * Replaced Wyse entries with updated entries supplied by vendor.
23327 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
23328 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
23329 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
23330 # * Better XENIX keycap translation. Describe TC termcaps.
23331 # * Contact and history info supplied by Qume.
23332 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
23333 # * Raided the Shuford FTP site for recent termcaps/terminfos.
23334 # * Added information on X3.64 and VT100 standard escape sequences.
23335 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
23336 # * Added a correct X11R6 xterm entry.
23337 # * Fixed terminfo translations of padding.
23338 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
23339 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
23340 # * Added u6/u7/u8/u9 capabilities.
23341 # * Added PCVT entry.
23342 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
23343 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
23344 # to use reverse-video standout so Emacs will look right.
23345 # * Added el1 capability to ansi.
23346 # * Added smacs/rmacs to ansi.sys.
23348 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
23349 # * New mt70 entry.
23350 # * Added COPYRIGHTS AND OTHER DELUSIONS.
23351 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
23352 # smartvid & smarterm, ampex 175 & 219 & 232,
23353 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
23354 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
23355 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
23356 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
23357 # * Replaced the Perkin-Elmer entries with vendor's official ones.
23358 # * Restored the old minimal-ansi entry, luna needs it.
23359 # * Fixed some incorrect ip and proportional-padding translations.
23360 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
23361 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
23362 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
23363 # to force a particular height.
23364 # * Added beehive4 and reorganized other Harris entries.
23365 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
23366 # * Merged in DEC's official entries for its terminals. The only old
23367 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
23368 # * Replaced the translated BBN Bitgraph entries with purpose-built
23369 # ones from AT&T's SVr3.
23370 # * Replaced the AT&T entries with AT&T's official terminfos.
23371 # * Added teleray 16, vc415, cops10.
23372 # * Merged in many individual capabilities from SCO terminfo files.
23373 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
23375 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
23376 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
23377 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
23378 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
23379 # simterm, citoh and variants.
23380 # * Replaced sol entry with sol1 and sol2.
23381 # * Replaced Qume QVT and Freedom-series entries with purpose-built
23382 # terminfo entries.
23383 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
23384 # and dg200 entries using caps from from SCO.
23385 # * Added the usual set of function-key mappings to ANSI entry.
23386 # * Corrected xterm's function-key capabilities.
23387 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
23388 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
23389 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
23390 # * Fix in xterm entry, get the arrow keys right.
23391 # * Change some \0 escapes to \200.
23392 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
23393 # * Added apple (Videx card), adm1a, oadm31.
23394 # * Fixed malformed ampex csr.
23395 # * Fixed act4, cyb110; they had old-style prefix padding left in.
23396 # * Changed mandatory to advisory padding in many entries.
23397 # * Replaced HP entries up to hpsub with purpose-built ones.
23398 # * Blank rmir/smir/rmdc/smdc capabilities removed.
23399 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
23400 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
23401 # * Replaced the Ann Arbor entries with SCO's, the init strings are
23402 # more efficient (but the entries otherwise identical).
23403 # * Added dg211 from Shuford archive.
23404 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
23405 # adm42-nl, pc52, gs6300, xerox820, uts30.
23406 # * Pull SCO's padding into vi200 entry.
23407 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
23408 # entries merged in from SCO's descriptions.
23409 # * Fixed old-style prefix padding on zen50, h1500.
23410 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
23411 # entry from SCO's description.
23412 # * Reorganized the special entries.
23413 # * Added lm#0 to cbunix and virtual entries.
23415 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
23416 # * Restored cdc456tst.
23417 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
23418 # * Added megatek, beacon, microkit.
23419 # * Freeze for ncurses-1.9 release.
23420 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
23421 # * Added historical data for TAB.
23422 # * Comment fixes from David MacKenzie.
23423 # * Added the new BSDI pc3 entry.
23424 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
23425 # * A change in the tic -C logic now ensures that all entries in
23426 # the termcap translation will fit in < 1024 bytes.
23427 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
23428 # from GNU termcap file. This merges in all their local information.
23429 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
23430 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
23431 # * Added warnings about entries with long translations (restoring
23432 # all the GNU termcaps pushes a few over the edge).
23433 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
23434 # * Yet another tic change, and a couple of entry tweaks, to reduce the
23435 # number of long (> 1024) termcap translations back to 0.
23437 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
23438 # * Added kf13-kf20 to Linux entry.
23439 # * Regularize Prime terminal names.
23440 # * Historical data on Synertek.
23441 # * Freeze for ncurses-1.9.1.
23442 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
23443 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
23444 # * Eliminate whitespace in short name fields, this tanks some scripts.
23445 # * Name field changes to shorten some long entries.
23446 # * Termcap translation now automatically generates empty rmir/smir
23447 # when ich1/ich is present (copes with an ancient vi bug).
23448 # * Added `screen' entries from FSF's screen-3.6.2.
23449 # * Added linux-nic and xterm-nic entries.
23450 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
23451 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
23452 # eliminating some special-case code in ncurses.
23454 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
23455 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
23456 # that captures everything unique from it.
23457 # * Added reorder script generator.
23458 # * Freeze for ncurses 1.9.2 release.
23459 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
23460 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
23461 # * Added Olaf Siebert's corrections for adm12.
23462 # * ansi-pc-color now includes the colors and pairs caps, so that
23463 # entries which use it will inherit them automatically.
23464 # * The linux entry can now recognize the center (keypad 5) key.
23465 # * Removed some junk that found its way into Linux acsc.
23467 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
23468 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
23469 # * xterm doesn't try to use application keypad mode any more.
23470 # * Freeze for ncurses-1.9.3 release.
23471 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
23472 # * Added corrected sun entry from vendor.
23473 # * Added csr capability to linux entry.
23474 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
23475 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
23476 # * Some commented-out caps in long entries come back in, my code
23477 # for computing string-table lengths had a bug in it.
23478 # * pcansi series modified to fit comm-program reality better.
23479 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
23480 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
23481 # * Correct some bad aliases in the pcansi series
23482 # * Added entry for QNX console.
23483 # * Clean up duplicate long names for use with 4.4 library.
23484 # * Change vt100 standout to be normal reverse vide, not bright reverse;
23485 # this makes the Emacs status line look better.
23486 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
23487 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
23488 # * Minor surgery, mostly on name strings, to shorten termcap version.
23490 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
23491 # * Added dec-vt100 for use with the EWAN emulator.
23492 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
23493 # * Freeze for 1.9.5 alpha release.
23494 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
23495 # * Changed xterm lines to 24, the X11R6 default.
23496 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
23497 # * Added 7 newly discovered, undocumented acsc characters to linux
23498 # entry (the pryz{|} characters).
23499 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
23500 # * Correct two typos in the xterm entries introduced in 9.9.1.
23501 # * I finally figured out how to translate ko capabilities. Done.
23502 # * Added tvi921 entries from Tim Theisen.
23503 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
23504 # * Removed mystery tec entry, it was neither interesting nor useful.
23505 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
23506 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
23507 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
23508 # by making them relative to use capabilities
23509 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
23510 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
23511 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
23513 # * Translate all home=\E[;H capabilities to home=\E[H, they're
23515 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
23516 # vt100 and ANSI-like terminals.
23517 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
23518 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
23519 # does this now, too.
23520 # * fviewpoint is gone, it duplicated screwpoint.
23521 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
23522 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
23523 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
23524 # The UW vi50 replaces the old one, which becomes vi50adm,
23525 # * No more embedded commas in name fields.
23527 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
23528 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
23529 # * Introduced klone+* entries for describing Intel-console behavior.
23530 # * Linux kbs is default-mapped to delete for some brain-dead reason.
23531 # * -nsl -> -ns. The -pp syntax is obsolete.
23532 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
23533 # * Make xterm entry do application-keypad mode again. I got complaints
23534 # that it was messing up someone's 3270 emulator.
23535 # * Added some longname fields in order to avoid warning messages from
23536 # older tic implementations.
23537 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
23538 # it! (This gives us pi, greater than, less than, and a few more.)
23539 # * Freeze for ncurses-1.9.6 release.
23540 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
23541 # * Add xon to a number of console entries, they're memory-mapped and
23542 # don't need padding.
23543 # * Correct the use dependencies in the ansi series.
23544 # * Hand-translate more XENIX capabilities.
23545 # * Added hpterm entry for HP's X terminal emulator.
23546 # * Added aixterm entries.
23547 # * Shortened four names so everything fits in 14 chars.
23549 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
23550 # * Added ibcs2 entry and info on iBCS2 standard.
23551 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
23552 # * We can handle the HP meml/memu capability now.
23553 # * Added smacs to klone entries, just as documentation.
23554 # * Carrected ansi.sys and cit-500 entries.
23555 # * Added z39, vt320-k311, v220c, and avatar entries.
23556 # * Make pcansi use the ansi.sys invis capability.
23557 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
23558 # tvi925, tvi950, dt80, ncr7900i, h19.
23559 # * X3.64 has been withdrawn, change some references.
23560 # * Removed function keys from ansi-m entry.
23561 # * Corrected ansi.sys entry.
23562 # * Freeze for ncurses-1.9.7 release.
23563 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
23564 # * Added rmam/smam capabilities to many entries based on init strings.
23565 # * Added correct hpa/vpa to linux.
23566 # * Reduced several entries relative to vt52.
23567 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
23568 # * Exiled some utterly unidentifiable custom and homebrew types to the
23569 # UFO file; also, obsolete small-screen hardware; also, entries which
23570 # look flat-out incorrect, garbled, or redundant. These include the
23571 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
23572 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
23573 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
23574 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
23575 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
23576 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
23577 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
23578 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
23579 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
23580 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
23581 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
23582 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
23583 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
23584 # * Corrected pcvt25h as suggested by Brian C. Grayson
23585 # <bgrayson@pine.ece.utexas.edu>.
23586 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
23587 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
23588 # * Added kent=\EOM to xterm entry.
23590 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
23591 # * Corrected gigi entry.
23592 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
23593 # bad hpa/vpa capabilities.
23594 # * Corrected flash strings to have a uniform delay of .2 sec. No
23595 # more speed-dependent NUL-padding!
23596 # * terminfo capabilities in comments bracketed with <>.
23597 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
23598 # * Replaced pcvt with the 3.31 pcvt entries.
23599 # * Freeze for 1.9.7a.
23600 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
23601 # * Added emu entry from the X11R6 contrib tape sources.
23603 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
23604 # * Improved iris-ansi and sun entries.
23605 # * More flash string improvements.
23606 # * Corrected wy160 & wy160 as suggested by Robert Dunn
23607 # * Added dim to at386.
23608 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
23609 # he's ready to start using the termcap generated from this one.
23610 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
23611 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
23612 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
23613 # att610, att620, att630,
23614 # * Changed hazeltine name prefix from h to hz.
23615 # * Sent t500 to the UFI file.
23616 # * I think we've sucked all the juice out of BSDI's termcap file now.
23617 # * Freeze for ncurses 1.9.8 release
23618 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
23619 # * Unfreeze, linux kbs needed to be fixed.
23620 # * Tim Theisen pinned down a bug in the DMD firmware.
23621 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
23622 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
23623 # (The broken ones had been shadowed by sgr.)
23624 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
23625 # * Added documentation on ECMA-48 standard.
23626 # * New Amiga entry.
23627 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
23628 # * More ECMA-48 stuff
23629 # * Corrected typo in minix entry, added pc-minix.
23630 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
23631 # * Added rxvt entry.
23632 # * Added 1.3.x color-change capabilities to linux entry.
23633 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
23634 # * Corrected rxvt entry khome/kend.
23635 # * Corrected linux color change capabilities.
23636 # * NeXT entries from Dave Wetzel.
23637 # * Cleaned up if and rf file names (all in /usr/share now).
23638 # * Changed linux op capability to avoid screwing up a background color
23639 # pair set by setterm.
23640 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
23641 # * Added xterm-sun.
23642 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
23645 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
23646 # * Another sweep through the Shuford archive looking for new info.
23647 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
23648 # * Added st52 from Per Persson.
23649 # * Added eterm from the GNU Emacs 19.30 distribution.
23650 # * Freeze for 1.9.9.
23651 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
23652 # * FreeBSD console entries from Andrew Chernov.
23653 # * Removed duplicate Atari st52 name.
23654 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
23655 # * xterm doesn't actually have ACS_BLOCK.
23656 # * Change klone+color setf/setb to simpler forms that can be
23657 # translated into termcap.
23659 # * Removed mechanically-generated junk capabilities from cons* entries.
23660 # * Added color support to bsdos.
23661 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
23662 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
23663 # * Created ecma+color, linux can use it. Also added ech to linux.
23664 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
23665 # * Add descriptions to FreeBSD console entries. Also shorten
23666 # some aliases to <= 14 chars for portability.
23667 # * Added x68k console
23668 # * Added OTbs to several VT-series entries.
23669 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
23670 # * screen entry update for 3.7.1 from Michael Alan Dorman.
23671 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
23672 # * kterm correction due to Kenji Rikitake.
23673 # * ACS correction in vt320-kll due to Phillippe De Muyter.
23674 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
23675 # * Sun console entry correction from J.T. Conklin.
23676 # * Changed all DEC VT300 and up terminals to use VT300 tab set
23677 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
23678 # * Added smul to linux entry (we never noticed it was missing
23679 # because of sgr!).
23680 # * Added rmln to hp+labels (deduced from other HP entries).
23681 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
23682 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
23683 # * Corrected vt220 acsc.
23684 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
23685 # this corresponds to reality and helps prevent some tic warnings.
23686 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
23687 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
23688 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
23689 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
23690 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
23691 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
23692 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
23693 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
23694 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
23695 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
23696 # ifmr, v3220, wy100q, tandem653, ibmaed.
23697 # * Added DWK terminal description.
23698 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
23699 # * Many entries now have highlights inherited from adm+sgr.
23700 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
23701 # * xtitle and xtitle-twm enable access to the X status line.
23702 # * Added linux-1.3.6 color palette caps in conventional format.
23703 # * Added adm1178 terminal.
23704 # * Move fos and apollo terminals to obsolete category.
23705 # * Aha! The BRL terminals file told us what the Iris extensions mean.
23706 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
23707 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
23709 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
23710 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
23711 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
23712 # * Corrected, from BRL termcap file: vi50.
23713 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
23714 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
23715 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
23716 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
23717 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
23718 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
23719 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
23720 # * Paired-attribute fixes to various terminals.
23721 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
23722 # * xterm entry corrections from Thomas Dickey.
23723 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
23724 # * Added t916 entry, translated from a termcap in SCO's support area.
23725 # * New qnx entry from Michael Hunter.
23726 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
23727 # * Added hpex2 from Ville Sulko.
23728 # * Fixed a bug that ran the qnx and pcvtXX together.
23729 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
23730 # * Added dtterm entry from Solaris CDE.
23731 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
23732 # * corrected pairs#8 typo in dtterm entry.
23734 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
23735 # * updated xterm entry to cover 3.1.2E's new features.
23736 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
23737 # * Added new minix entry
23738 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
23739 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
23740 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
23741 # * Added Prism entries and kt7ix.
23742 # * Caution notes about EWAN and tabset files.
23743 # * Changed /usr/lib/tabset -> /usr/share/tabset.
23744 # * Added acsc/rmacs/smacs to vt52.
23745 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
23746 # * Merged in Thomas Dickey's reorganization of the xterm entries;
23747 # added technical corrections to avoid warning messages.
23748 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
23749 # * Added rmso=\E[27m in Linux entry.
23750 # * Added koi8-r support for Linux console.
23751 # * Replace xterm entries with canonical ones from XFree86 3.2.
23752 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
23753 # * Added color_xterm from Jacob Mandelson
23754 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
23755 # * Back off the xterm entry to use r6 as a base.
23756 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
23757 # * Added dec-vt220 at Adrian Garside's request.
23759 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
23761 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
23762 # * Minor corrections to xterm entries.
23763 # * Replaced EWAN telnet entry.
23764 # * Dropped the reorder script generator. It was a fossil.
23765 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23766 # * Replaced minitel-2 entry.
23767 # * Added MGR, ansi-nt.
23768 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23769 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23770 # the 4.4BSD Lite2 file.
23772 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
23773 # * Use setaf/setab consistently with SVr4.
23774 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
23775 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
23776 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
23777 # * add xterm-16color, for XFree86 3.3
23778 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
23779 # * correct typo in emu
23780 # * correct typo in vt102-w (Robert Wuest)
23781 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
23782 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
23783 # * remove ech capability from rxvt (it does the wrong thing)
23784 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
23785 # * remove spurious newlines from several entries (hp+color, wy50,
23786 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
23788 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
23789 # * correct rmso capability of wy50-mc
23790 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
23791 # * add cbt to xterm-xf86-v32
23792 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
23793 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
23794 # other capabilities not in xterm-r6.
23795 # * remove alternate character set from kterm entry.
23796 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
23797 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
23798 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
23799 # * add xterm-8bit entry.
23800 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
23801 # * repair several places where early version of tic replaced \, with \\\,
23802 # * make acsc entries canonical form (sorted, uniq).
23803 # * modify acsc entries for linux, linux-koi8
23804 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
23805 # * add color, mouse support to kterm.
23806 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
23807 # * correct wy120 smxon/tbc capabilities which were stuck together.
23808 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
23809 # * add entry for xterm-xf86-v39t
23810 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
23811 # * add u8,u9 to sun-il description
23812 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
23813 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
23815 # * add hds200 description (Walter Skorski)
23816 # * add EMX 0.9b descriptions
23817 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
23818 # * rename xhpterm back to hpterm.
23819 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
23820 # * change initc in linux-c-nc to use 0..1000 range.
23821 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
23822 # * remove hpa/vpa from rxvt, which implements them incorrectly.
23823 # * add sgr0 for rxvt.
23824 # * remove bogus smacs/rmacs from EMX descriptions.
23825 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
23826 # * revised entry for att7300
23827 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
23828 # * use \0 rather than \200.
23829 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
23830 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
23831 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
23832 # * rename xterm-xf86-v39t to xterm-xf86-v40
23833 # * remove bold/underline from sun console entries since they're not
23835 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
23836 # * add beterm entry (Fred Fish)
23837 # * add irix-color/xwsh entry.
23838 # * turn ncv off for linux.
23839 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
23840 # * set ncv for FreeBSD console (treat colors with reverse specially).
23841 # * remove sgr string from qnx based on report by Xiaodan Tang
23842 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
23843 # * remove spurious commas from descriptions
23844 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
23845 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
23846 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23847 # apparently based on cp-866).
23849 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
23851 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23852 # * Replaced minitel-2 entry.
23853 # * Added MGR, ansi-nt.
23854 # * Minor corrections to xterm entries.
23855 # * Replaced EWAN telnet entry.
23856 # * Dropped the reorder script generator. It was a fossil.
23857 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23858 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23859 # the 4.4BSD Lite2 file.
23860 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
23861 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
23862 # * Updated iris-ansi; corrected vt102-w.
23863 # * Switch base xterm entry to 3.3 level.
23864 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
23866 # * Removed rmir/smir from tv92B.
23868 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
23869 # * add hds200 description (Walter Skorski)
23870 # * add beterm entry (Fred Fish)
23871 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
23872 # iris-color entries.
23873 # * add emx entries.
23874 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
23875 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
23877 # * remove sgr string from qnx based on report by Xiaodan Tang
23878 # * Added u8/u9, removed rmul/smul from sun-il.
23879 # * 4.2 tic displays \0 rather than \200.
23880 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23881 # apparently based on cp-866).
23882 # * Merged in Pavel Roskin's acsc for linux-koi8
23883 # * Corrected some erroneous \\'s to \.
23884 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
23885 # * II -> ii in pcvtXX, screen, xterm.
23886 # * Removed \n chars following ANSI escapes in sgr & friends.
23887 # * Updated Wyse entries.
23888 # * h19 corrections from Tim Pierce.
23889 # * Noted that the dm2500 has both ich and smir.
23890 # * added pccons for the Alpha under OSF/1.
23891 # * Added Sony NEWS workstation entries and cit101e-rv.
23892 # * Reverted `amiga'; to Kent Polk's version, as I'm told
23893 # the Verkuil entry messes up with Amiga Telnet.
23894 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
23895 # * Corrected attributions in 10.2.0 release notes.
23896 # * Scanned the Shuford archive for new terminfos and information.
23897 # * Removed sgr from qnx entry (Thomas Dickey).
23898 # * Added entries for ICL and Kokusai Data Systems terminals.
23899 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
23900 # * Incorporated att700 from the Boundless Technology FTP site.
23901 # * Miscellaneous contact-address and Web-page updates.
23903 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
23906 # * add nxterm and xterm-color terminfo description (request by Cristian
23907 # Gafton <gafton@redhat.com>).
23908 # * modify rxvt terminfo description to clear alternate screen before
23909 # switching back to normal screen, for compatibility with applications
23910 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
23911 # * modify linux terminfo description to reset color palette (reported
23912 # by Telford Tendys <telford@eng.uts.edu.au>).
23915 # * merge changes from current XFree86 xterm terminfo descriptions.
23918 # * Added minitel1 entries from Alexander Montaron.
23919 # * Added qnxt2 from Federico Bianchi.
23920 # * Added arm100 terminfo entries from Dave Millen.
23923 # * Added ncsa telnet entries from Francesco Potorti
23926 # * modify ncsa telnet entry to reflect color, other capabilities based on
23927 # examination of the source code - T.Dickey.
23930 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
23933 # * Added Francesco Potorti's tuned Wyse 99 entries.
23934 # * dtterm enacs correction from Alexander V. Lukyanov.
23935 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
23936 # * correct a typo in icl6404 entry.
23937 # * add xtermm and xtermc
23940 # * format most %'char' sequences to %{number}
23941 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
23942 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
23945 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
23946 # * correct initialization string in xterm-r5, add misc other features
23947 # to correspond with xterm patch #84 - TD
23950 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
23951 # * add Mathew Vernon's mach console entries
23952 # * corrections for ncsa function-keys (report by Larry Virden)
23955 # * change linux to use ncv#2, since underline does not work with color - TD
23958 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
23959 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
23960 # application modes, change kent to use the correct keypad code - TD
23963 # * add entry for Tera Term - TD
23966 # * minor improvements for teraterm entry - TD
23967 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
23968 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
23971 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
23972 # xterm and ncsa entries by removing the unneeded ones. Note that
23973 # some entries will return kend & khome versus kslt and kfnd, for
23974 # PC-style keyboards versus strict vt220 compatiblity - TD
23977 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
23979 # * add 'crt' entry - TD
23980 # * correct typos in 'linux-c' entry - TD
23983 # * update entries for BSD/OS console to use klone+sgr and klone+color
23984 # (Jeffrey C Honig)
23987 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
23990 # * add linux-lat, from RedHat patches to ncurses 4.2
23993 # * add complete set of default function-key definitions for scoansi - TD.
23996 # * add cnorm, cvvis for Linux 2.2 kernels
23999 # * add kmous to xterm-r5 -TD
24000 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24001 # parent "use" clause -TD
24004 # * corrected cnorm, added el1 in 'screen' description -TD
24007 # * add ms-vt100 -TD
24010 # * corrections to beterm entry -TD
24013 # * add cygwin entry -TD
24016 # * minor corrections for beterm entry -TD
24019 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24022 # * add amiga-8bit entry
24023 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24024 # rcons-color, based on
24025 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24026 # * add alias for iris-ansi-net
24029 # * corrected scoansi entry's acsc, some function keys, add color -TD
24032 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24033 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24034 # key mapping, leaving Potorti's entries more like he named them -TD
24035 # * remove enter/exit am-mode from cygwin -TD
24038 # * correct typos in several entries (missing '[' from CSI):
24039 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24040 # strings for avt-ns -TD
24041 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24044 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24045 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24046 # * add xterm-88color and xterm-256color -TD
24049 # * add "obsolete" termcap strings -TD
24050 # * add kvt and gnome entries -TD
24053 # * correct cup string for regent100 -TD
24056 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24057 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24058 # * change OTrs capabilities to rs2 -TD
24059 # * add obsolete and extended capabilities to 'screen' -TD
24062 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24064 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24065 # and adding kcbt -TD
24068 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24069 # nonstandard resource settings -TD
24072 # * minor fixes for xterm-*, based on Debian #58530 -TD
24075 # * add several terminal types from esr's "11.0", as well as comments.
24076 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24077 # vt220-8bit, vt220-old, wy85-8bit
24080 # * add several terminal types from esr's "11.0.1" (ansi-*).
24081 # * update OTxx capabilities for changes on 2000/3/4.
24082 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24085 # * move screen's AX extension to ecma+color, modify several entries to
24086 # use that, adjusting ncv as needed -TD
24089 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24090 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24091 # in esr's version.
24094 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24095 # * correct color definition for ibm3164, make minor changes to other
24096 # IBM terminal definitions based on recent terminfo descriptions -TD
24099 # * add mgterm, from NetBSD -TD
24100 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24101 # * change cons25w to use rs2 for reset rather than rs1 -TD
24102 # * add rc/sc to aixterm based on manpage -TD
24105 # * remove ncv from xterm-16color, xterm-256color
24108 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24111 # * add Eterm (Michael Jennings)
24114 # * add amiga-vnc entry.
24117 # * correct description of Top Gun Telnet.
24118 # * add kterm-color
24121 # * add qansi* entries from QNX ftp site.
24124 # * add Matrix Orbital entries by Eric Z. Ayers).
24125 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24129 # * add S0, E0 extensions to screen's entry -TD
24132 # * several corrections based on tic's new parameter-checking code -TD
24133 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24134 # bracketing sequences that reset video attributes (\E8 would restore
24138 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24141 # * improved scoansi, based on SCO man-page, and testing console,
24142 # scoterm with tack -TD
24145 # * modify kterm to use acsc via SCS controls.
24148 # * screen 3.9.8 allows xterm mouse controls to pass-through
24151 # * remove spurious "%|" from some xterm entries.
24154 # * modify 'screen' khome/kend to match screen 3.09.08
24155 # * add examples of 'screen' customization (screen.xterm-xfree86,
24156 # screen.xterm-r6, screen.teraterm) -TD
24159 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24160 # * add "Apple_Terminal" entries -Benjamin Sittler
24161 # * remove time-delays from "Apple_Terminal" entries -TD
24162 # * make sgr entries time-delays consistent with individual caps -TD
24165 # * corrected/updated screen.xterm-xfree86
24168 # * ELKS descriptions, from Federico Bianchi
24169 # * add u6 (CSR) to Eterm (Michael Jennings).
24172 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
24173 # tic which handles names no longer than 14 characters. Add
24174 # corresponding descriptions for the Darwin PowerPC console named
24175 # "xnuppc" -Benjamin Sittler
24178 # * change kbs in mach entries to ^? (Marcus Brinkmann).
24181 # * add "putty" entry -TD
24182 # * updated "Apple_Terminal" entries -Benjamin Sittler
24185 # * add ms-vt100-color entry -TD
24186 # * add "konsole" entries -TD
24189 # * update gnome entry to Redhat 7.2 -TD
24192 # * add kf13-kf48 strings to cons25w -TD
24193 # * add pcvt25-color entry -TD
24194 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
24195 # * improve some features of scoansi entry based on SCO's version -TD
24196 # * add scoansi-new entry corresponding to OpenServer 5.0.6
24199 # * add kcbt to screen entry -TD
24202 # * add rxvt-16color, ibm+16color, mvterm entries -TD
24205 # * split out linux-basic entry, making linux-c inherit from that, and
24206 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
24207 # the history of this console type -TD
24208 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
24209 # r/g/b parameters of initc are in the range 0 to 1000 -TD
24212 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
24215 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
24216 # in the latter -TD
24219 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
24220 # * ncr260wy350pp has only 16 color pairs -TD
24221 # * add sun-type4 from NetBSD -TD
24222 # * update xterm-xfree86 to current (xterm patch #170) -TD
24223 # * add screen-bce, screen-s entries -TD
24224 # * add xterm-1002, xterm-1003 entries -TD
24227 # * update homepage for Top Gun Telnet/SSH
24230 # * reduce duplication in emx entries, added emx-base -TD
24233 # * corrected acs for screen.teraterm -TD
24234 # * add tkterm entry -TD
24237 # * cygwin changes from Charles Wilson:
24238 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
24239 # primary instead of nxterm, to match XFree86's xterm.terminfo
24240 # usage and to prevent circular links.
24241 # (rxvt): add additional codes from rxvt.org.
24242 # (rxvt-color): new alias
24243 # (rxvt-xpm): new alias
24244 # (rxvt-cygwin): like rxvt, but with special acsc codes.
24245 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
24246 # with a "native" MSWin GUI. Each takes different acsc codes,
24247 # which are both different from the "normal" rxvt's acsc.
24248 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
24249 # (cygwinDBG): ditto.
24252 # * update gnome terminal entries -TD
24255 # * add entries for djgpp 2.03 and 2.04 -TD
24258 # * add alias for vtnt -TD
24259 # * update xterm-xfree86 for XFree86 4.4 -TD
24262 # * add linux-vt (Andrey V Lukyanov)
24265 # * add screen.linux -TD
24268 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
24271 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
24272 # * add vt100+ and vt-utf8 entries -TD
24273 # * add uwin entry -TD
24276 # * add sgr strings to several common entries lacking them, e.g.,
24277 # screen, to make the entries more portable -TD
24278 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
24279 # * similar fixups for cvvis/cnorm various entries -TD
24282 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
24286 # * add xterm-xf86-v44 -TD
24287 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
24288 # on G1 being used via an ISO-2022 escape sequence (report by
24289 # Juliusz Chroboczek) -TD
24290 # * add 'hurd' entry -TD
24293 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
24295 # * align with xterm #192's use of xterm-new -TD
24296 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
24297 # * make xterm-new the default "xterm" -TD
24300 # * minor fixes for emu -TD
24302 # * add rmam/smam to linux (Trevor Van Bremen)
24303 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
24304 # * fixes for avatar0 -TD
24305 # * fixes for vp3a+ -TD
24308 # * add xterm-pc-fkeys -TD
24309 # * review/update gnome and gnome-rh90 entries (prompted by
24310 # Redhat Bugzilla #122815) -TD
24311 # * review/update konsole entries -TD
24312 # * add sgr, correct sgr0 for kterm and mlterm -TD
24313 # * correct tsl string in kterm -TD
24316 # * make ncsa-m rmacs/smacs consistent with sgr -TD
24317 # * add sgr, rc/sc and ech to syscons entries -TD
24318 # * add function-keys to decansi -TD
24319 # * add sgr to mterm-ansi -TD
24320 # * add sgr, civis, cnorm to emu -TD
24321 # * correct/simplify cup in addrinfo -TD
24322 # * corrections for gnome and konsole entries
24323 # (Redhat Bugzilla #122815) -Hans de Goede
24324 # * modify DEC entries (vt220, etc), to add sgr string, and to use
24325 # ISO-2022 strings for rmacs/smacs -TD
24328 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
24331 # * improved putty entry -Robert de Bath
24334 # * remove dch/dch1 from rxvt because they are implemented inconsistently
24335 # with the common usage of bce/ech -TD
24336 # * remove khome from vt220 (vt220's have no home key) -TD
24337 # * add rxvt+pcfkeys -TD
24340 # * modify several entries to ensure xterm mouse and cursor visibility
24341 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
24342 # Eterm, screen. (The xterm entries are left alone - old ones for
24343 # compatibility, and the new ones do not require this change) -TD
24346 # * add morphos entry -Pavel Fedin
24347 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
24348 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
24351 # * update wsvt25 entry -TD
24354 # * update pairs for xterm-88color and xterm-256color to reflect the
24355 # ncurses extended-color support -TD
24358 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
24359 # * add aixterm-16color to demonstrate 16-color capability -TD
24362 # * add media-copy to vt100 -TD
24363 # * corrected acsc string for vt52 -TD
24366 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
24368 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
24371 # * re-corrected acsc string for vt52 -TD
24374 # * corrected sun-il sgr string which referred to bold and underline -TD
24375 # * add sun-color entry -TD
24378 # * modify sgr0 in several entries to reset alternate-charset as in the
24380 # * modify sgr string of prism9 to better match the individual
24384 # * correct order of use= in rxvt-basic -TD
24387 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
24390 # * other minor fixes to cygwin based on tack -TD
24391 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
24394 # * add nsterm-16color entry -TD
24395 # * remove ncv flag from xterm-16color -TD
24396 # * remove setf/setb from xterm-256color to match xterm #209 -TD
24397 # * update mlterm entry to 2.9.2 -TD
24400 # * fixes to make nsterm-16color match report
24401 # by Christian Ebert -Alain Bench
24404 # * add xterm+256color building block -TD
24405 # * add gnome-256color, putty-256color, rxvt-256color -TD
24408 # * add hpterm-color -TD
24411 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
24412 # * add gnome-fc5 (prompted by GenToo #122566) -TD
24413 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
24414 # * improve xterm-256color by combining the ibm+16color setaf/setab
24415 # strings with SGR 48. The setf/setb strings also are cancelled here
24416 # rather than omitted so derived entries will cancel those also -Alain
24420 # * add some notes regarding copyright to terminfo.src -TD
24421 # * use rxvt+pcfkeys in Eterm -TD
24422 # * remove km and flash from gnome, Eterm and rxvt since they do not work
24423 # as one would expect (km sends ESC rather than setting the 8th bit
24425 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
24426 # * add konsole-solaris -TD
24429 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
24430 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
24431 # * modify xterm-24 to inherit from "xterm" -TD
24432 # * add xiterm entry -TD
24433 # * add putty-vt100 entry -TD
24434 # * corrected spelling of Michael A Dorman's name, prompted by
24435 # http://www.advogato.org/person/mdorman/diary.html -TD
24438 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
24439 # * update xterm+pcfkeys to match xterm #216 -TD
24442 # * make descriptions of xterm entries consistent with its terminfo -TD
24445 # * add xfce, mgt -TD
24448 # * correct acsc string in kterm -TD
24451 # * add kon entry -TD
24452 # * remove invis from linux and related entries, add klone+sgr8 for those
24453 # that implement the feature (or have not been shown to lack it) -TD
24456 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
24457 # * minor improvements to rxvt+pcfkeys -TD
24460 # * fix a few typos in if/then/else expressions -TD
24463 # * add several GNU Screen variations with 16- and 256-colors, and
24464 # status line (Alain Bench).
24467 # * add Newbury Data entries (Jean-Charles Billaud).
24470 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
24473 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
24474 # * add konsole-256color entry -TD
24477 # * add 9term entry (request by Juhapekka Tolvanen) -TD
24480 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
24481 # * add shift-control- and control-modified keys for rxvt editing
24483 # * update mlterm entry to 2.9.3 -TD
24484 # * add mlterm+pcfkeys -TD
24487 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
24488 # xterm+pcc0, etc., to make the corresponding building blocks reflect
24489 # xterm's capabilities -TD
24490 # * add mrxvt entry -TD
24491 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
24494 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
24497 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
24498 # xterm starting with xterm patch #216 -TD
24499 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
24500 # to match xterm #230 -TD
24501 # * extend xterm+pccX entries to match xterm #230 -TD
24502 # * add xterm+app, xterm+noapp, from xterm #230 -TD
24503 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
24506 # * add screen.rxvt -TD
24509 # * add screen+fkeys (prompted by Debian #478094) -TD
24512 # * add screen.mlterm -TD
24513 # * improve mlterm and mlterm+pcfkeys -TD
24516 # * add Eterm-256color, Eterm-88color -TD
24517 # * add rxvt-88color -TD
24520 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
24521 # original to teraterm2.3 -TD
24522 # * update "gnome" to 2.22.3 -TD
24523 # * update "konsole" to 1.6.6 -TD
24524 # * add "aterm" -TD
24525 # * add "linux2.6.26" -TD
24528 # * change several \E[2g (clear tab at current column) to \E[3g
24529 # (clear all tabs) to match definition for tbc capability -TD
24532 # * add eterm-color -TD
24535 # * add screen.Eterm -TD
24538 # * correct typo in pfkey of ansi.sys-old
24539 # (report by Kalle Olavi Niemitalo)
24540 # * move function- and cursor-keys from emx-base to ansi.sys, and create
24541 # a pfkey capability which handles F1-F48 -TD
24544 # * add vwmterm entry (Bryan Christ)
24547 # * change ncv and op capabilities in sun-color to match Sun's entry for
24548 # this (report by Laszlo Peter)
24549 # * improve interix smso by using reverse rather than bold (report by
24550 # Kristof Zelechovski).
24553 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
24554 # * add linux-16color (Benjamin Sittler)
24555 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
24556 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
24557 # * add ccc and initc capabilities to xterm-16color -TD
24560 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
24563 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
24566 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
24567 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
24570 # * add bterm (bogl 0.1.18) -TD
24571 # * minor fix to rxvt+pcfkeys -TD
24574 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
24577 # * add several screen-bce.XXX entries -TD
24580 # * modify screen-bce.XXX entries to exclude ech, since screen's color
24581 # model does not clear with color for that feature -TD
24584 # * rename atari and st52 to atari-old, st52-old, use newer entries from
24585 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
24588 # * add mlterm-256color entry -TD
24591 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
24592 # the alternate character set (patch by Nicholas Marriott)
24595 # * improve acsc for vt52 (Benjamin Sittler)
24596 # * modify nsterm entries for consistent sgr/sgr0 -TD
24597 # * modify xnuppc entries for consistent sgr/sgr0 -TD
24598 # * add invis to tek4115 sgr -TD
24601 # * reformat acsc strings to canonical format -TD
24604 # * add "XT" capability to entries for terminals that support both
24605 # xterm-style mouse- and title-controls, for "screen" which
24606 # special-cases TERM beginning with "xterm" or "rxvt" -TD
24609 # * fill in no-parameter forms of cursor-movement where a parameterized
24610 # form is available -TD
24611 # * fill in missing cursor controls where the form of the controls is
24613 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
24616 # * correct comparison used for setting 16-colors in linux-16color
24617 # entry (Novell #644831) -TD
24618 # * improve linux-16color entry, using "dim" for color-8 which makes it
24619 # gray rather than black like color-0 -TD
24622 # * make "vte" the principal entry defining "gnome", since GNOME terminal
24623 # is merely one of several terminals whose behavior is provided by this
24627 # * fix typo in rmso for tek4106 -Goran Weinholt
24630 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
24631 # * also suppress ncv in konsole-base -TD
24634 # * add U8 feature to denote entries for terminal emulators which do not
24635 # support VT100 SI/SO when processing UTF-8 encoding -TD
24636 # * add xterm-utf8 as a demo of the U8 feature -TD
24639 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
24642 # * update minix entry to minix 3.2 (Thomas Cort).
24645 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
24646 # * remove a backslash which continued comment, obscuring altos3
24647 # definition with OpenBSD toolset (Nicholas Marriott).
24650 # * add/use xterm+tmux chunk from xterm #271 -TD
24651 # * resync xterm-new entry from xterm #271 -TD
24652 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
24653 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
24654 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
24657 # * add kich1 to sun (Yuri Pankov)
24658 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
24661 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
24664 # * minor cleanup of X-terminal emulator section -TD
24665 # * add terminator entry -TD
24666 # * add simpleterm entry -TD
24669 # * add xterm+kbs fragment from xterm #272 -TD
24672 # * add pccon entries for OpenBSD console (Alexei Malinin)
24675 # * corrected old changelog comments -TD
24678 # * add putty-sco -TD
24681 # * add mach-gnu (Samuel Thibault)
24682 # * add mach-gnu-color, tweaks to mach-gnu -TD
24683 # * make sgr for sun-color agree with smso -TD
24684 # * make sgr for prism9 agree with other caps -TD
24685 # * make sgr for icl6404 agree with other caps -TD
24686 # * make sgr for ofcons agree with other caps -TD
24687 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
24688 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
24689 # * make sgr for avt-ns agree with other caps -TD
24692 # * make sgr for xterm-pcolor agree with other caps -TD
24693 # * make sgr for att5425 agree with other caps -TD
24694 # * make sgr for att630 agree with other caps -TD
24695 # * make sgr for linux entries agree with other caps -TD
24696 # * make sgr for tvi9065 agree with other caps -TD
24697 # * make sgr for ncr260vt200an agree with other caps -TD
24698 # * make sgr for ncr160vt100pp agree with other caps -TD
24699 # * make sgr for ncr260vt300an agree with other caps -TD
24700 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
24701 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
24704 # * correct order of use-clauses in st-256color -TD
24707 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
24710 # * document all of the user-defined capabilities in one place -TD
24711 # * add XT to some places to improve usefulness for other applications
24712 # than screen, which would like to pretend that xterm's title is
24713 # a status-line. -TD
24714 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
24715 # of ordering and overrides -TD
24718 # * add msgr to vt420, similar DEC vtXXX entries -TD
24719 # * add several missing vt420 capabilities from vt220 -TD
24720 # * factor out ansi+pp from several entries -TD
24721 # * change xterm+sl and xterm+sl-twm to include only the status-line
24722 # capabilities and not "use=xterm", making them more generally useful
24723 # as building-blocks -TD
24724 # * add dec+sl building block, as example -TD
24727 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
24728 # * add eslok flag to dec+sl -TD
24729 # * dec+sl applies to vt320 and up -TD
24730 # * drop wsl width from xterm+sl -TD
24731 # * reuse xterm+sl in putty and nsca-m -TD
24732 # * add ansi+tabs to vt520 -TD
24733 # * add ansi+enq to vt220-vt520 -TD
24736 # * remove p6 (bold) from opus3n1+ for consistency -TD
24737 # * remove acs stuff from env230 per clues in Ingres termcap -TD
24738 # * modify env230 sgr/sgr0 to match other capabilities -TD
24739 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
24740 # * make sgr for dku7202 agree with other caps -TD
24741 # * make sgr for ibmpc agree with other caps -TD
24742 # * make sgr for tek4107 agree with other caps -TD
24743 # * make sgr for ndr9500 agree with other caps -TD
24744 # * make sgr for sco-ansi agree with other caps -TD
24745 # * make sgr for d410 agree with other caps -TD
24746 # * make sgr for d210 agree with other caps -TD
24747 # * make sgr for d470c, d470c-7b agree with other caps -TD
24750 # * rewrite vt520 entry based on vt420 -TD
24751 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
24754 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
24755 # analysis by Martin Husemann).
24756 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
24757 # Onno van der Linden).
24758 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
24759 # * add kdch1, etc., to qvt108 -TD
24760 # * add dl1/il1 to some entries based on dl/il values -TD
24761 # * add dl to simpleterm -TD
24764 # * modify some older xterm entries to align with xterm source -TD
24765 # * separate "xterm-old" alias from "xterm-r6" -TD
24768 # * add E3 to xterm-basic and putty -TD
24771 # * add nsterm-256color, make this the default nsterm -TD
24772 # * remove bw from nsterm-bce, per testing with tack -TD
24775 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
24776 # (patch by Christian Persch).
24779 # * reviewed vte-2012, reverted most of the change since it was incorrect
24780 # based on testing with tack -TD
24781 # * un-cancel the initc in vte-256color, since this was implemented
24782 # starting with version 0.20 in 2009 -TD
24785 # * correct typo in sgr string for sun-color,
24786 # add bold for consistency with sgr,
24787 # change smso for consistency with sgr -TD
24788 # * correct typo in sgr string for terminator -TD
24789 # * add blink to the attributes masked by ncv in linux-16color (report
24790 # by Benjamin Sittler)
24793 # * change initialization for vt220, similar entries for consistency
24794 # with cursor-key strings (NetBSD #47674) -TD
24795 # * further improvements to linux-16color (Benjamin Sittler)
24798 # * move nsterm-related entries out of "obsolete" section to more
24799 # plausible "ansi consoles" -TD
24800 # * additional cleanup of table-of-contents by reordering -TD
24803 # * added note to clarify Terminal.app's non-emulation of the various
24804 # terminal types listed in the preferences dialog -TD
24807 # * use TS extension to describe xterm's title-escapes -TD
24808 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
24809 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
24810 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
24811 # (Debian #727119).
24812 # * simplify pfkey expression in ansi.sys -TD
24815 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
24818 # * updated notes for wsvt25 based on tack and vttest -TD
24819 # * add teken entry to show actual properties of FreeBSD's "xterm"
24823 # * add terminology entry -TD
24824 # * add mlterm3 entry, use that as "mlterm" -TD
24825 # * inherit mlterm-256color from mlterm -TD
24828 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
24831 # * cancel ccc in putty-256color and konsole-256color for consistency
24832 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
24833 # * add xterm+256setaf building block for various terminals which only
24834 # get the 256-color feature half-implemented -TD
24835 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
24839 # * add vt520ansi (Mike Gran)
24842 # * correct several entries which had termcap-style padding used in
24843 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
24844 # * correct syntax for padding in some entries: dg211, h19 -TD
24845 # * correct ti924-8 which had confused padding versus octal escapes -TD
24846 # * correct padding in sbi entry -TD
24849 # * update xterm-new to xterm patch #305 -TD
24850 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
24851 # (italic). This was a long-ago typo in screen 3.1.1 which was
24852 # overlooked until a few terminal emulators implemented the feature -TD
24855 # > fix regression in screen terminfo entries (reports by Christian
24856 # Ebert, Gabriele Balducci) -TD
24857 # + revert the change to screen; see notes for why this did not work -TD
24858 # + cancel sitm/ritm for entries which extend "screen", to work around
24859 # screen's hardcoded behavior for SGR 3 -TD
24862 # + modify sgr for screen.xterm-new to support dim capability -TD
24863 # + add dim capability to nsterm+7 -TD
24864 # + cancel dim capability for iterm -TD
24865 # + add dim, invis capabilities to vte-2012 -TD
24866 # + add sitm/ritm to konsole-base and mlterm3 -TD
24869 # + add xterm-1005 and xterm-1006 entries, with suggested extension
24870 # capability "xm" -TD
24873 # + update test-report for mrxvt -TD
24876 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
24879 # + reviewed terminology 0.6.1, add function key definitions. None of
24880 # the vt100-compatibility issues were improved -TD
24883 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
24884 # + add several key definitions to nsterm-bce to match preconfigured
24885 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
24888 # + remove unnecessary ';' from E3 capabilities -TD
24889 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
24890 # + split-out recent change to nsterm-bce as nsterm-build326, and add
24891 # nsterm-build342 to reflect changes with successive releases of OSX
24892 # (discussion with Leonardo B Schenkel)
24893 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
24897 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
24898 # + add several screen.XXX entries to support the respective variations
24899 # for 256 colors -TD
24902 # + add putty+fnkeys* building-block entries -TD
24905 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
24906 # + add vte-2014, update vte to use that -TD
24909 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
24910 # from xterm-new (report by Richard Birkett) -TD
24913 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
24914 # + fixes for st 0.5 from testing with tack -TD
24917 # + updated minitel entries to fix kel problem with emacs, and add
24918 # minitel1b-nb (Alexandre Montaron).
24919 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
24920 # + replace some dead URLs in commands with equivalents from the
24921 # Internet Archive -TD
24924 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
24925 # + add keys f12-f124 to pccon+keys (Tati Chevron).
24928 # + fix some inconsistencies in the pccon* entries -TD
24931 # + add viewdata (Alexandre Montaron).
24934 # + tidy up comments about hardcoded 256color palette (report by
24935 # Leonardo Brondani Schenkel) -TD
24936 # + add putty-noapp entry, and amend putty entry to use application mode
24937 # for better consistency with xterm (report by Leonardo Brondani
24941 # + add 'oc' capability to xterm+256color, allowing palette reset for
24945 # + modify linux2.6 entry to improve line-drawing -TD
24946 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
24949 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
24950 # reset palette using "oc" string as in linux -TD
24953 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
24954 # that could be returned -TD
24955 # + added a few capabilities fixed in recent vte -TD
24958 # + correct a typo in interix -TD
24961 # + updated minitel entries to use status line with screen(1), as well as
24962 # printing special G2 videotex chars like french accentuated glyph
24963 # using special cap XC= (patch by Alexandre Montaron).
24966 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
24967 # + correct rs2 string for vt100-nam -TD
24970 # + modify linux-16color to not mask dim, standout or reverse with the
24971 # ncv capability -TD
24972 # + add 0.1sec mandatory delay to flash capabilities using the VT100
24973 # reverse-video control -TD
24974 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
24975 # entry, to avoid conflict with the user-defined mapping. The reset
24976 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
24979 # + merge current st description (report by Harry Gindi) -TD
24982 # + modify flash capability for linux and wyse entries to put the delay
24983 # between the reverse/normal escapes rather than after -TD
24986 # + minor comment-fixes to help automate links to bug-urls -TD
24987 # + add dvtm, dvtm-256color -TD
24988 # + add settings corresponding to xterm-keys option to tmux entry to
24989 # reflect upcoming change to make that option "on" by default
24990 # (patch by Nicholas Marriott).
24991 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
24992 # + add dumb-emacs-ansi -TD
24994 ######## SHANTIH! SHANTIH! SHANTIH!