* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="generator" content="Manpage converted by man2html - see https://invisible-island.net/scripts/readme.html#others_scripts">
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="generator" content="Manpage converted by man2html - see https://invisible-island.net/scripts/readme.html#others_scripts">
method of updating character screens with reasonable optimization.
This implementation is "new curses" (ncurses) and is the approved
replacement for 4.4BSD classic curses, which has been discontinued.
method of updating character screens with reasonable optimization.
This implementation is "new curses" (ncurses) and is the approved
replacement for 4.4BSD classic curses, which has been discontinued.
The <STRONG>ncurses</STRONG> library emulates the curses library of System V Release 4
UNIX, and XPG4 (X/Open Portability Guide) curses (also known as XSI
The <STRONG>ncurses</STRONG> library emulates the curses library of System V Release 4
UNIX, and XPG4 (X/Open Portability Guide) curses (also known as XSI
Before a <STRONG>curses</STRONG> program is run, the tab stops of the terminal should be
set and its initialization strings, if defined, must be output. This
can be done by executing the <STRONG>tput</STRONG> <STRONG>init</STRONG> command after the shell
Before a <STRONG>curses</STRONG> program is run, the tab stops of the terminal should be
set and its initialization strings, if defined, must be output. This
can be done by executing the <STRONG>tput</STRONG> <STRONG>init</STRONG> command after the shell
- environment variable <STRONG>TERM</STRONG> has been exported. <STRONG>tset(1)</STRONG> is usually
- responsible for doing this. [See <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> for further details.]
+ environment variable <STRONG>TERM</STRONG> has been exported. (The BSD-style <STRONG><A HREF="tset.1.html">tset(1)</A></STRONG>
+ utility also performs this function.) See subsection "Tabs and
+ Initialization" of <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
- The <STRONG>ncurses</STRONG> library permits manipulation of data structures, called
- <EM>windows</EM>, which can be thought of as two-dimensional arrays of
- characters representing all or part of a CRT screen. A default window
- called <STRONG>stdscr</STRONG>, which is the size of the terminal screen, is supplied.
+ The <STRONG>ncurses</STRONG> library permits manipulation of data structures, called
+ <EM>windows</EM>, which can be thought of as two-dimensional arrays of
+ characters representing all or part of a CRT screen. A default window
+ called <STRONG>stdscr</STRONG>, which is the size of the terminal screen, is supplied.
- Note that <STRONG>curses</STRONG> does not handle overlapping windows, that's done by
- the <STRONG><A HREF="panel.3x.html">panel(3x)</A></STRONG> library. This means that you can either use <STRONG>stdscr</STRONG> or
- divide the screen into tiled windows and not using <STRONG>stdscr</STRONG> at all.
+ Note that <STRONG>curses</STRONG> does not handle overlapping windows, that's done by
+ the <STRONG><A HREF="panel.3x.html">panel(3x)</A></STRONG> library. This means that you can either use <STRONG>stdscr</STRONG> or
+ divide the screen into tiled windows and not using <STRONG>stdscr</STRONG> at all.
- Windows are referred to by variables declared as <STRONG>WINDOW</STRONG> <STRONG>*</STRONG>. These data
- structures are manipulated with routines described here and elsewhere
- in the <STRONG>ncurses</STRONG> manual pages. Among those, the most basic routines are
- <STRONG>move</STRONG> and <STRONG>addch</STRONG>. More general versions of these routines are included
- with names beginning with <STRONG>w</STRONG>, allowing the user to specify a window.
+ Windows are referred to by variables declared as <STRONG>WINDOW</STRONG> <STRONG>*</STRONG>. These data
+ structures are manipulated with routines described here and elsewhere
+ in the <STRONG>ncurses</STRONG> manual pages. Among those, the most basic routines are
+ <STRONG>move</STRONG> and <STRONG>addch</STRONG>. More general versions of these routines are included
+ with names beginning with <STRONG>w</STRONG>, allowing the user to specify a window.
- After using routines to manipulate a window, <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG> is called,
- telling <STRONG>curses</STRONG> to make the user's CRT screen look like <STRONG>stdscr</STRONG>. The
- characters in a window are actually of type <STRONG>chtype</STRONG>, (character and
- attribute data) so that other information about the character may also
+ After using routines to manipulate a window, <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG> is called,
+ telling <STRONG>curses</STRONG> to make the user's CRT screen look like <STRONG>stdscr</STRONG>. The
+ characters in a window are actually of type <STRONG>chtype</STRONG>, (character and
+ attribute data) so that other information about the character may also
be stored with each character.
Special windows called <EM>pads</EM> may also be manipulated. These are windows
be stored with each character.
Special windows called <EM>pads</EM> may also be manipulated. These are windows
- which are not constrained to the size of the screen and whose contents
- need not be completely displayed. See <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG> for more
+ which are not constrained to the size of the screen and whose contents
+ need not be completely displayed. See <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG> for more
- In addition to drawing characters on the screen, video attributes and
- colors may be supported, causing the characters to show up in such
- modes as underlined, in reverse video, or in color on terminals that
- support such display enhancements. Line drawing characters may be
- specified to be output. On input, <STRONG>curses</STRONG> is also able to translate
- arrow and function keys that transmit escape sequences into single
- values. The video attributes, line drawing characters, and input
- values use names, defined in <STRONG><curses.h></STRONG>, such as <STRONG>A_REVERSE</STRONG>, <STRONG>ACS_HLINE</STRONG>,
+ In addition to drawing characters on the screen, video attributes and
+ colors may be supported, causing the characters to show up in such
+ modes as underlined, in reverse video, or in color on terminals that
+ support such display enhancements. Line drawing characters may be
+ specified to be output. On input, <STRONG>curses</STRONG> is also able to translate
+ arrow and function keys that transmit escape sequences into single
+ values. The video attributes, line drawing characters, and input
+ values use names, defined in <STRONG><curses.h></STRONG>, such as <STRONG>A_REVERSE</STRONG>, <STRONG>ACS_HLINE</STRONG>,
and <STRONG>KEY_LEFT</STRONG>.
</PRE><H3><a name="h3-Environment-variables">Environment variables</a></H3><PRE>
and <STRONG>KEY_LEFT</STRONG>.
</PRE><H3><a name="h3-Environment-variables">Environment variables</a></H3><PRE>
- If the environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> are set, or if the
- program is executing in a window environment, line and column
- information in the environment will override information read by
- <EM>terminfo</EM>. This would affect a program running in an AT&T 630 layer,
- for example, where the size of a screen is changeable (see
+ If the environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> are set, or if the
+ program is executing in a window environment, line and column
+ information in the environment will override information read by
+ <EM>terminfo</EM>. This would affect a program running in an AT&T 630 layer,
+ for example, where the size of a screen is changeable (see
- If the environment variable <STRONG>TERMINFO</STRONG> is defined, any program using
- <STRONG>curses</STRONG> checks for a local terminal definition before checking in the
- standard place. For example, if <STRONG>TERM</STRONG> is set to <STRONG>att4424</STRONG>, then the
+ If the environment variable <STRONG>TERMINFO</STRONG> is defined, any program using
+ <STRONG>curses</STRONG> checks for a local terminal definition before checking in the
+ standard place. For example, if <STRONG>TERM</STRONG> is set to <STRONG>att4424</STRONG>, then the
- (The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid creation of
- huge directories.) However, if <STRONG>TERMINFO</STRONG> is set to <STRONG>$HOME/myterms</STRONG>,
+ (The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid creation of
+ huge directories.) However, if <STRONG>TERMINFO</STRONG> is set to <STRONG>$HOME/myterms</STRONG>,
<STRONG>curses</STRONG> first checks
<STRONG>$HOME/myterms/a/att4424</STRONG>,
<STRONG>curses</STRONG> first checks
<STRONG>$HOME/myterms/a/att4424</STRONG>,
permission in <STRONG>/usr/share/terminfo</STRONG> is not available.
The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in <STRONG><curses.h></STRONG> and will
permission in <STRONG>/usr/share/terminfo</STRONG> is not available.
The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in <STRONG><curses.h></STRONG> and will
- The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable <STRONG>curscr</STRONG> which is
- used for certain low-level operations like clearing and redrawing a
- screen containing garbage. The <STRONG>curscr</STRONG> can be used in only a few
+ The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable <STRONG>curscr</STRONG> which is
+ used for certain low-level operations like clearing and redrawing a
+ screen containing garbage. The <STRONG>curscr</STRONG> can be used in only a few
with <EM>w</EM> require a window argument. The routines prefixed with <EM>p</EM> require
a pad argument. Those without a prefix generally use <STRONG>stdscr</STRONG>.
with <EM>w</EM> require a window argument. The routines prefixed with <EM>p</EM> require
a pad argument. Those without a prefix generally use <STRONG>stdscr</STRONG>.
- to <STRONG>move</STRONG> before the call to the other routine. The coordinate <EM>y</EM> always
- refers to the row (of the window), and <EM>x</EM> always refers to the column.
+ to <STRONG>move</STRONG> before the call to the other routine. The coordinate <EM>y</EM> always
+ refers to the row (of the window), and <EM>x</EM> always refers to the column.
The upper left-hand corner is always (0,0), not (1,1).
The upper left-hand corner is always (0,0), not (1,1).
- The routines prefixed with <STRONG>mvw</STRONG> take both a window argument and <EM>x</EM> and <EM>y</EM>
- coordinates. The window argument is always specified before the
+ The routines prefixed with <STRONG>mvw</STRONG> take both a window argument and <EM>x</EM> and <EM>y</EM>
+ coordinates. The window argument is always specified before the
- Option setting routines require a Boolean flag <EM>bf</EM> with the value <STRONG>TRUE</STRONG>
- or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of the data types used in
- the library routines, such as <STRONG>WINDOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are
- defined in <STRONG><curses.h></STRONG>. Types used for the terminfo routines such as
+ Option setting routines require a Boolean flag <EM>bf</EM> with the value <STRONG>TRUE</STRONG>
+ or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of the data types used in
+ the library routines, such as <STRONG>WINDOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are
+ defined in <STRONG><curses.h></STRONG>. Types used for the terminfo routines such as
- This manual page describes functions which may appear in any
- configuration of the library. There are two common configurations of
+ This manual page describes functions which may appear in any
+ configuration of the library. There are two common configurations of
- the "normal" library, which handles 8-bit characters. The
- normal (8-bit) library stores characters combined with
+ the "normal" library, which handles 8-bit characters. The
+ normal (8-bit) library stores characters combined with
<STRONG>chtype</STRONG> or the equivalent <STRONG>attr_t</STRONG> data. In either case, the data
is stored in something like an integer.
Each cell (row and column) in a <STRONG>WINDOW</STRONG> is stored as a <STRONG>chtype</STRONG>.
<EM>ncursesw</EM>
<STRONG>chtype</STRONG> or the equivalent <STRONG>attr_t</STRONG> data. In either case, the data
is stored in something like an integer.
Each cell (row and column) in a <STRONG>WINDOW</STRONG> is stored as a <STRONG>chtype</STRONG>.
<EM>ncursesw</EM>
- the so-called "wide" library, which handles multibyte
- characters (see the section on <STRONG>ALTERNATE</STRONG> <STRONG>CONFIGURATIONS</STRONG>). The
- "wide" library includes all of the calls from the "normal"
- library. It adds about one third more calls using data types
+ the so-called "wide" library, which handles multibyte
+ characters (see the section on <STRONG>ALTERNATE</STRONG> <STRONG>CONFIGURATIONS</STRONG>). The
+ "wide" library includes all of the calls from the "normal"
+ library. It adds about one third more calls using data types
which store multibyte characters:
<STRONG>cchar_t</STRONG>
corresponds to <STRONG>chtype</STRONG>. However it is a structure, because
which store multibyte characters:
<STRONG>cchar_t</STRONG>
corresponds to <STRONG>chtype</STRONG>. However it is a structure, because
- more data is stored than can fit into an integer. The
- characters are large enough to require a full integer
+ more data is stored than can fit into an integer. The
+ characters are large enough to require a full integer
- The "wide" library provides new functions which are analogous
- to functions in the "normal" library. There is a naming
- convention which relates many of the normal/wide variants: a
- "_w" is inserted into the name. For example, <STRONG>waddch</STRONG> becomes
+ The "wide" library provides new functions which are analogous
+ to functions in the "normal" library. There is a naming
+ convention which relates many of the normal/wide variants: a
+ "_w" is inserted into the name. For example, <STRONG>waddch</STRONG> becomes
<STRONG>wadd_wch</STRONG>.
</PRE><H3><a name="h3-Routine-Name-Index">Routine Name Index</a></H3><PRE>
<STRONG>wadd_wch</STRONG>.
</PRE><H3><a name="h3-Routine-Name-Index">Routine Name Index</a></H3><PRE>
- The following table lists the <STRONG>curses</STRONG> routines provided in the "normal"
- and "wide" libraries and the names of the manual pages on which they
- are described. Routines flagged with "*" are ncurses-specific, not
+ The following table lists the <STRONG>curses</STRONG> routines provided in the "normal"
+ and "wide" libraries and the names of the manual pages on which they
+ are described. Routines flagged with "*" are ncurses-specific, not
bkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
bkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
bkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
bkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
bkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
bkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
border_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
box <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
box_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
border_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
box <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
box_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
getn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
getnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
getparx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
getn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
getnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
getparx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
getparyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
getstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
getsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
getparyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
getstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
getsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
instr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
instr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_keypad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_leaveok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_linetouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_keypad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_leaveok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_linetouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
is_nodelay <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_notimeout <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_pad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_nodelay <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_notimeout <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_pad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_scrollok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_subwin <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_syncok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_scrollok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_subwin <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_syncok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
key_name <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
keybound <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
keyname <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
key_name <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
keybound <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
keyname <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
keyok <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
keypad <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
killchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
killwchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
leaveok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
keyok <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
keypad <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
killchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
killwchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
leaveok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
longname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
mcprint <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
meta <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
longname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
mcprint <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
meta <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
mvwaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
mvwaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
mvwchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
mvwaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
mvwaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
mvwchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
mvwdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
mvwget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
mvwget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
mvwgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
mvwgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
mvwdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
mvwget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
mvwget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
mvwgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
mvwgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
mvwgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
mvwgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
mvwhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
mvwgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
mvwgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
mvwhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
overlay <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
overwrite <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
overlay <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
overwrite <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
resizeterm <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
restartterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
ripoffline <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
resizeterm <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
restartterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
ripoffline <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
savetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
scr_dump <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scr_init <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scr_restore <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
savetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
scr_dump <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scr_init <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scr_restore <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scr_set <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
scroll <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
scr_set <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
scrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
scroll <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
slk_restore <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
slk_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
slk_touch <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
slk_restore <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
slk_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
slk_touch <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
standend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
standout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
start_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
standend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
standout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
start_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
tigetnum <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
tigetnum <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
tiparm_s <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
tiscan_s <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
tiparm_s <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
tiscan_s <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
ungetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
ungetmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
untouchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
ungetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
ungetmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
untouchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
use_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
use_tioctl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
use_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
use_tioctl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vidattr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vidattr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
win_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
win_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
win_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
win_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
win_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
win_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
winch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
winchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
winchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
winnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
winnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
winch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
winchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
winchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
winnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
winnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
wins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
wins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
wins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
wins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
wins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
wins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
wvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
wvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
wvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
wvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
value other than <STRONG>ERR</STRONG> upon successful completion, unless otherwise noted
in the routine descriptions.
As a general rule, routines check for null pointers passed as
parameters, and handle this as an error.
value other than <STRONG>ERR</STRONG> upon successful completion, unless otherwise noted
in the routine descriptions.
As a general rule, routines check for null pointers passed as
parameters, and handle this as an error.
- All macros return the value of the <STRONG>w</STRONG> version, except <STRONG>setscrreg</STRONG>,
- <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG>. The return values of
- <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG> are undefined
- (i.e., these should not be used as the right-hand side of assignment
+ All macros return the value of the <STRONG>w</STRONG> version, except <STRONG>setscrreg</STRONG>,
+ <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG>. The return values of
+ <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG> are undefined
+ (i.e., these should not be used as the right-hand side of assignment
- the window pointer is null. Most "mv"-prefixed functions (except
- variadic functions such as <STRONG>mvprintw</STRONG>) are provided both as macros and
+ the window pointer is null. Most "mv"-prefixed functions (except
+ variadic functions such as <STRONG>mvprintw</STRONG>) are provided both as macros and
functions.
Routines that return pointers return <STRONG>NULL</STRONG> on error.
</PRE><H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
functions.
Routines that return pointers return <STRONG>NULL</STRONG> on error.
</PRE><H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
- The following environment symbols are useful for customizing the
- runtime behavior of the <STRONG>ncurses</STRONG> library. The most important ones have
+ The following environment symbols are useful for customizing the
+ runtime behavior of the <STRONG>ncurses</STRONG> library. The most important ones have
been already discussed in detail.
</PRE><H3><a name="h3-CC-command-character">CC command-character</a></H3><PRE>
been already discussed in detail.
</PRE><H3><a name="h3-CC-command-character">CC command-character</a></H3><PRE>
- When set, change occurrences of the command_character (i.e., the <STRONG>cmdch</STRONG>
- capability) of the loaded terminfo entries to the value of this
+ When set, change occurrences of the command_character (i.e., the <STRONG>cmdch</STRONG>
+ capability) of the loaded terminfo entries to the value of this
variable. Very few terminfo entries provide this feature.
Because this name is also used in development environments to represent
variable. Very few terminfo entries provide this feature.
Because this name is also used in development environments to represent
</PRE><H3><a name="h3-BAUDRATE">BAUDRATE</a></H3><PRE>
The debugging library checks this environment variable when the
</PRE><H3><a name="h3-BAUDRATE">BAUDRATE</a></H3><PRE>
The debugging library checks this environment variable when the
- application has redirected output to a file. The variable's numeric
- value is used for the baudrate. If no value is found, <STRONG>ncurses</STRONG> uses
+ application has redirected output to a file. The variable's numeric
+ value is used for the baudrate. If no value is found, <STRONG>ncurses</STRONG> uses
9600. This allows testers to construct repeatable test-cases that take
into account costs that depend on baudrate.
</PRE><H3><a name="h3-COLUMNS">COLUMNS</a></H3><PRE>
Specify the width of the screen in characters. Applications running in
9600. This allows testers to construct repeatable test-cases that take
into account costs that depend on baudrate.
</PRE><H3><a name="h3-COLUMNS">COLUMNS</a></H3><PRE>
Specify the width of the screen in characters. Applications running in
- a windowing environment usually are able to obtain the width of the
- window in which they are executing. If neither the <STRONG>COLUMNS</STRONG> value nor
- the terminal's screen size is available, <STRONG>ncurses</STRONG> uses the size which
+ a windowing environment usually are able to obtain the width of the
+ window in which they are executing. If neither the <STRONG>COLUMNS</STRONG> value nor
+ the terminal's screen size is available, <STRONG>ncurses</STRONG> uses the size which
- It is important that your application use a correct size for the
- screen. This is not always possible because your application may be
- running on a host which does not honor NAWS (Negotiations About Window
+ It is important that your application use a correct size for the
+ screen. This is not always possible because your application may be
+ running on a host which does not honor NAWS (Negotiations About Window
- Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified independently. This
- is mainly useful to circumvent legacy misfeatures of terminal
- descriptions, e.g., xterm which commonly specifies a 65 line screen.
- For best results, <STRONG>lines</STRONG> and <STRONG>cols</STRONG> should not be specified in a terminal
+ Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified independently. This
+ is mainly useful to circumvent legacy misfeatures of terminal
+ descriptions, e.g., xterm which commonly specifies a 65 line screen.
+ For best results, <STRONG>lines</STRONG> and <STRONG>cols</STRONG> should not be specified in a terminal
(but not including system calls) to determine the screen size. Use the
<STRONG>use_tioctl</STRONG> function to update <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen size
obtained from system calls or the terminal database.
(but not including system calls) to determine the screen size. Use the
<STRONG>use_tioctl</STRONG> function to update <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen size
obtained from system calls or the terminal database.
</PRE><H3><a name="h3-ESCDELAY">ESCDELAY</a></H3><PRE>
Specifies the total time, in milliseconds, for which ncurses will await
</PRE><H3><a name="h3-ESCDELAY">ESCDELAY</a></H3><PRE>
Specifies the total time, in milliseconds, for which ncurses will await
- a character sequence, e.g., a function key. The default value, 1000
- milliseconds, is enough for most uses. However, it is made a variable
+ a character sequence, e.g., a function key. The default value, 1000
+ milliseconds, is enough for most uses. However, it is made a variable
- The most common instance where you may wish to change this value is to
- work with slow hosts, e.g., running on a network. If the host cannot
- read characters rapidly enough, it will have the same effect as if the
- terminal did not send characters rapidly enough. The library will
+ The most common instance where you may wish to change this value is to
+ work with slow hosts, e.g., running on a network. If the host cannot
+ read characters rapidly enough, it will have the same effect as if the
+ terminal did not send characters rapidly enough. The library will
- Note that xterm mouse events are built up from character sequences
- received from the xterm. If your application makes heavy use of
- multiple-clicking, you may wish to lengthen this default value because
- the timeout applies to the composed multi-click event as well as the
+ Note that xterm mouse events are built up from character sequences
+ received from the xterm. If your application makes heavy use of
+ multiple-clicking, you may wish to lengthen this default value because
+ the timeout applies to the composed multi-click event as well as the
- global variable with the same name. Portable applications should not
- rely upon the presence of ESCDELAY in either form, but setting the
- environment variable rather than the global variable does not create
+ global variable with the same name. Portable applications should not
+ rely upon the presence of ESCDELAY in either form, but setting the
+ environment variable rather than the global variable does not create
COLUMNS for a detailed description.
</PRE><H3><a name="h3-MOUSE_BUTTONS_123">MOUSE_BUTTONS_123</a></H3><PRE>
COLUMNS for a detailed description.
</PRE><H3><a name="h3-MOUSE_BUTTONS_123">MOUSE_BUTTONS_123</a></H3><PRE>
- This applies only to the OS/2 EMX port. It specifies the order of
- buttons on the mouse. OS/2 numbers a 3-button mouse inconsistently
+ This applies only to the OS/2 EMX port. It specifies the order of
+ buttons on the mouse. OS/2 numbers a 3-button mouse inconsistently
specified, <STRONG>ncurses</STRONG> uses 132.
</PRE><H3><a name="h3-NCURSES_ASSUMED_COLORS">NCURSES_ASSUMED_COLORS</a></H3><PRE>
specified, <STRONG>ncurses</STRONG> uses 132.
</PRE><H3><a name="h3-NCURSES_ASSUMED_COLORS">NCURSES_ASSUMED_COLORS</a></H3><PRE>
- Override the compiled-in assumption that the terminal's default colors
- are white-on-black (see <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>). You may set the
- foreground and background color values with this environment variable
- by proving a 2-element list: foreground,background. For example, to
- tell ncurses to not assume anything about the colors, set this to
- "-1,-1". To make it green-on-black, set it to "2,0". Any positive
+ Override the compiled-in assumption that the terminal's default colors
+ are white-on-black (see <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>). You may set the
+ foreground and background color values with this environment variable
+ by proving a 2-element list: foreground,background. For example, to
+ tell ncurses to not assume anything about the colors, set this to
+ "-1,-1". To make it green-on-black, set it to "2,0". Any positive
value from zero to the terminfo <STRONG>max_colors</STRONG> value is allowed.
</PRE><H3><a name="h3-NCURSES_CONSOLE2">NCURSES_CONSOLE2</a></H3><PRE>
This applies only to the MinGW port of ncurses.
value from zero to the terminfo <STRONG>max_colors</STRONG> value is allowed.
</PRE><H3><a name="h3-NCURSES_CONSOLE2">NCURSES_CONSOLE2</a></H3><PRE>
This applies only to the MinGW port of ncurses.
- The <STRONG>Console2</STRONG> program's handling of the Microsoft Console API call
- <STRONG>CreateConsoleScreenBuffer</STRONG> is defective. Applications which use this
+ The <STRONG>Console2</STRONG> program's handling of the Microsoft Console API call
+ <STRONG>CreateConsoleScreenBuffer</STRONG> is defective. Applications which use this
- by mapping coordinates, explicitly saving and restoring the original
- screen contents. Setting the environment variable <STRONG>NCGDB</STRONG> has the same
+ by mapping coordinates, explicitly saving and restoring the original
+ screen contents. Setting the environment variable <STRONG>NCGDB</STRONG> has the same
effect.
</PRE><H3><a name="h3-NCURSES_GPM_TERMS">NCURSES_GPM_TERMS</a></H3><PRE>
This applies only to ncurses configured to use the GPM interface.
effect.
</PRE><H3><a name="h3-NCURSES_GPM_TERMS">NCURSES_GPM_TERMS</a></H3><PRE>
This applies only to ncurses configured to use the GPM interface.
- If present, the environment variable is a list of one or more terminal
- names against which the <STRONG>TERM</STRONG> environment variable is matched. Setting
- it to an empty value disables the GPM interface; using the built-in
+ If present, the environment variable is a list of one or more terminal
+ names against which the <STRONG>TERM</STRONG> environment variable is matched. Setting
+ it to an empty value disables the GPM interface; using the built-in
- <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement optimization. In
- some cases, your terminal driver may not handle these properly. Set
- this environment variable to disable the feature. You can also adjust
+ <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement optimization. In
+ some cases, your terminal driver may not handle these properly. Set
+ this environment variable to disable the feature. You can also adjust
your <STRONG>stty(1)</STRONG> settings to avoid the problem.
</PRE><H3><a name="h3-NCURSES_NO_MAGIC_COOKIE">NCURSES_NO_MAGIC_COOKIE</a></H3><PRE>
your <STRONG>stty(1)</STRONG> settings to avoid the problem.
</PRE><H3><a name="h3-NCURSES_NO_MAGIC_COOKIE">NCURSES_NO_MAGIC_COOKIE</a></H3><PRE>
- Some terminals use a magic-cookie feature which requires special
- handling to make highlighting and other video attributes display
+ Some terminals use a magic-cookie feature which requires special
+ handling to make highlighting and other video attributes display
properly. You can suppress the highlighting entirely for these
terminals by setting this environment variable.
</PRE><H3><a name="h3-NCURSES_NO_PADDING">NCURSES_NO_PADDING</a></H3><PRE>
properly. You can suppress the highlighting entirely for these
terminals by setting this environment variable.
</PRE><H3><a name="h3-NCURSES_NO_PADDING">NCURSES_NO_PADDING</a></H3><PRE>
- Most of the terminal descriptions in the terminfo database are written
- for real "hardware" terminals. Many people use terminal emulators
+ Most of the terminal descriptions in the terminfo database are written
+ for real "hardware" terminals. Many people use terminal emulators
- Terminal emulators can duplicate all of the important aspects of a
- hardware terminal, but they do not have the same limitations. The
- chief limitation of a hardware terminal from the standpoint of your
- application is the management of dataflow, i.e., timing. Unless a
- hardware terminal is interfaced into a terminal concentrator (which
- does flow control), it (or your application) must manage dataflow,
- preventing overruns. The cheapest solution (no hardware cost) is for
- your program to do this by pausing after operations that the terminal
+ Terminal emulators can duplicate all of the important aspects of a
+ hardware terminal, but they do not have the same limitations. The
+ chief limitation of a hardware terminal from the standpoint of your
+ application is the management of dataflow, i.e., timing. Unless a
+ hardware terminal is interfaced into a terminal concentrator (which
+ does flow control), it (or your application) must manage dataflow,
+ preventing overruns. The cheapest solution (no hardware cost) is for
+ your program to do this by pausing after operations that the terminal
- As a result, many terminal descriptions (including the vt100) have
- delay times embedded. You may wish to use these descriptions, but not
+ As a result, many terminal descriptions (including the vt100) have
+ delay times embedded. You may wish to use these descriptions, but not
- Set the NCURSES_NO_PADDING environment variable to disable all but
- mandatory padding. Mandatory padding is used as a part of special
+ Set the NCURSES_NO_PADDING environment variable to disable all but
+ mandatory padding. Mandatory padding is used as a part of special
- <STRONG>ncurses</STRONG> enabled buffered output during terminal initialization. This
- was done (as in SVr4 curses) for performance reasons. For testing
- purposes, both of <STRONG>ncurses</STRONG> and certain applications, this feature was
- made optional. Setting the NCURSES_NO_SETBUF variable disabled output
- buffering, leaving the output in the original (usually line buffered)
+ <STRONG>ncurses</STRONG> enabled buffered output during terminal initialization. This
+ was done (as in SVr4 curses) for performance reasons. For testing
+ purposes, both of <STRONG>ncurses</STRONG> and certain applications, this feature was
+ made optional. Setting the NCURSES_NO_SETBUF variable disabled output
+ buffering, leaving the output in the original (usually line buffered)
- In the current implementation, ncurses performs its own buffering and
- does not require this workaround. It does not modify the buffering of
+ In the current implementation, ncurses performs its own buffering and
+ does not require this workaround. It does not modify the buffering of
- The reason for the change was to make the behavior for interrupts and
- other signals more robust. One drawback is that certain
- nonconventional programs would mix ordinary stdio calls with ncurses
- calls and (usually) work. This is no longer possible since ncurses is
- not using the buffered standard output but its own output (to the same
- file descriptor). As a special case, the low-level calls such as <STRONG>putp</STRONG>
+ The reason for the change was to make the behavior for interrupts and
+ other signals more robust. One drawback is that certain
+ nonconventional programs would mix ordinary stdio calls with ncurses
+ calls and (usually) work. This is no longer possible since ncurses is
+ not using the buffered standard output but its own output (to the same
+ file descriptor). As a special case, the low-level calls such as <STRONG>putp</STRONG>
still use the standard output. But high-level curses calls do not.
</PRE><H3><a name="h3-NCURSES_NO_UTF8_ACS">NCURSES_NO_UTF8_ACS</a></H3><PRE>
still use the standard output. But high-level curses calls do not.
</PRE><H3><a name="h3-NCURSES_NO_UTF8_ACS">NCURSES_NO_UTF8_ACS</a></H3><PRE>
- capabilities) described in the terminfo are known to be missing.
- Specifically, when running in a UTF-8 locale, the Linux console
- emulator and the GNU screen program ignore these. Ncurses checks the
- <STRONG>TERM</STRONG> environment variable for these. For other special cases, you
- should set this environment variable. Doing this tells ncurses to use
+ capabilities) described in the terminfo are known to be missing.
+ Specifically, when running in a UTF-8 locale, the Linux console
+ emulator and the GNU screen program ignore these. Ncurses checks the
+ <STRONG>TERM</STRONG> environment variable for these. For other special cases, you
+ should set this environment variable. Doing this tells ncurses to use
- When setting this variable, you should set it to a nonzero value.
- Setting it to zero (or to a nonnumber) disables the special check for
+ When setting this variable, you should set it to a nonzero value.
+ Setting it to zero (or to a nonnumber) disables the special check for
- As an alternative to the environment variable, ncurses checks for an
- extended terminfo capability <STRONG>U8</STRONG>. This is a numeric capability which
+ As an alternative to the environment variable, ncurses checks for an
+ extended terminfo capability <STRONG>U8</STRONG>. This is a numeric capability which
can be compiled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>. For example
# linux console, if patched to provide working
can be compiled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>. For example
# linux console, if patched to provide working
by applications that use ncurses' termcap interface.
</PRE><H3><a name="h3-NCURSES_TRACE">NCURSES_TRACE</a></H3><PRE>
by applications that use ncurses' termcap interface.
</PRE><H3><a name="h3-NCURSES_TRACE">NCURSES_TRACE</a></H3><PRE>
- During initialization, the <STRONG>ncurses</STRONG> debugging library checks the
- NCURSES_TRACE environment variable. If it is defined, to a numeric
- value, <STRONG>ncurses</STRONG> calls the <STRONG>trace</STRONG> function, using that value as the
+ During initialization, the <STRONG>ncurses</STRONG> debugging library checks the
+ NCURSES_TRACE environment variable. If it is defined, to a numeric
+ value, <STRONG>ncurses</STRONG> calls the <STRONG>trace</STRONG> function, using that value as the
- The argument values, which are defined in <STRONG>curses.h</STRONG>, provide several
- types of information. When running with traces enabled, your
+ The argument values, which are defined in <STRONG>curses.h</STRONG>, provide several
+ types of information. When running with traces enabled, your
application will write the file <STRONG>trace</STRONG> to the current directory.
See <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG> for more information.
</PRE><H3><a name="h3-TERM">TERM</a></H3><PRE>
application will write the file <STRONG>trace</STRONG> to the current directory.
See <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG> for more information.
</PRE><H3><a name="h3-TERM">TERM</a></H3><PRE>
- <STRONG>TERM</STRONG> is commonly set by terminal emulators to help applications find a
- workable terminal description. Some of those choose a popular
+ <STRONG>TERM</STRONG> is commonly set by terminal emulators to help applications find a
+ workable terminal description. Some of those choose a popular
approximation, e.g., "ansi", "vt100", "xterm" rather than an exact fit.
Not infrequently, your application will have problems with that
approach, e.g., incorrect function-key definitions.
approximation, e.g., "ansi", "vt100", "xterm" rather than an exact fit.
Not infrequently, your application will have problems with that
approach, e.g., incorrect function-key definitions.
- If you set <STRONG>TERM</STRONG> in your environment, it has no effect on the operation
- of the terminal emulator. It only affects the way applications work
- within the terminal. Likewise, as a general rule (<STRONG>xterm(1)</STRONG> being a
- rare exception), terminal emulators which allow you to specify <STRONG>TERM</STRONG> as
- a parameter or configuration value do not change their behavior to
+ If you set <STRONG>TERM</STRONG> in your environment, it has no effect on the operation
+ of the terminal emulator. It only affects the way applications work
+ within the terminal. Likewise, as a general rule (<STRONG>xterm(1)</STRONG> being a
+ rare exception), terminal emulators which allow you to specify <STRONG>TERM</STRONG> as
+ a parameter or configuration value do not change their behavior to
- If the <STRONG>ncurses</STRONG> library has been configured with <EM>termcap</EM> support,
- <STRONG>ncurses</STRONG> will check for a terminal's description in termcap form if it
+ If the <STRONG>ncurses</STRONG> library has been configured with <EM>termcap</EM> support,
+ <STRONG>ncurses</STRONG> will check for a terminal's description in termcap form if it
is not available in the terminfo database.
The <STRONG>TERMCAP</STRONG> environment variable contains either a terminal description
is not available in the terminfo database.
The <STRONG>TERMCAP</STRONG> environment variable contains either a terminal description
information, e.g., /etc/termcap.
</PRE><H3><a name="h3-TERMINFO">TERMINFO</a></H3><PRE>
information, e.g., /etc/termcap.
</PRE><H3><a name="h3-TERMINFO">TERMINFO</a></H3><PRE>
- <STRONG>ncurses</STRONG> can be configured to read from multiple terminal databases.
- The <STRONG>TERMINFO</STRONG> variable overrides the location for the default terminal
- database. Terminal descriptions (in terminal format) are stored in
+ <STRONG>ncurses</STRONG> can be configured to read from multiple terminal databases.
+ The <STRONG>TERMINFO</STRONG> variable overrides the location for the default terminal
+ database. Terminal descriptions (in terminal format) are stored in
terminal databases:
<STRONG>o</STRONG> Normally these are stored in a directory tree, using subdirectories
named by the first letter of the terminal names therein.
This is the scheme used in System V, which legacy Unix systems use,
terminal databases:
<STRONG>o</STRONG> Normally these are stored in a directory tree, using subdirectories
named by the first letter of the terminal names therein.
This is the scheme used in System V, which legacy Unix systems use,
- The hashed database uses less disk-space and is a little faster
- than the directory tree. However, some applications assume the
- existence of the directory tree, reading it directly rather than
+ The hashed database uses less disk-space and is a little faster
+ than the directory tree. However, some applications assume the
+ existence of the directory tree, reading it directly rather than
- <STRONG>o</STRONG> If <STRONG>ncurses</STRONG> is built with a support for reading termcap files
- directly, then an entry in this list may be the path of a termcap
+ <STRONG>o</STRONG> If <STRONG>ncurses</STRONG> is built with a support for reading termcap files
+ directly, then an entry in this list may be the path of a termcap
You might produce the base64 format using <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>:
TERMINFO="$(infocmp -0 -Q2 -q)"
export TERMINFO
You might produce the base64 format using <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>:
TERMINFO="$(infocmp -0 -Q2 -q)"
export TERMINFO
- Setting <STRONG>TERMINFO</STRONG> is the simplest, but not the only way to set location
- of the default terminal database. The complete list of database
+ Setting <STRONG>TERMINFO</STRONG> is the simplest, but not the only way to set location
+ of the default terminal database. The complete list of database
variable)
<STRONG>o</STRONG> /usr/share/terminfo (corresponding to the TERMINFO variable)
</PRE><H3><a name="h3-TERMINFO_DIRS">TERMINFO_DIRS</a></H3><PRE>
variable)
<STRONG>o</STRONG> /usr/share/terminfo (corresponding to the TERMINFO variable)
</PRE><H3><a name="h3-TERMINFO_DIRS">TERMINFO_DIRS</a></H3><PRE>
- Specifies a list of locations to search for terminal descriptions.
- Each location in the list is a terminal database as described in the
- section on the <STRONG>TERMINFO</STRONG> variable. The list is separated by colons
+ Specifies a list of locations to search for terminal descriptions.
+ Each location in the list is a terminal database as described in the
+ section on the <STRONG>TERMINFO</STRONG> variable. The list is separated by colons
extension developed for <STRONG>ncurses</STRONG>.
</PRE><H3><a name="h3-TERMPATH">TERMPATH</a></H3><PRE>
extension developed for <STRONG>ncurses</STRONG>.
</PRE><H3><a name="h3-TERMPATH">TERMPATH</a></H3><PRE>
- If <STRONG>TERMCAP</STRONG> does not hold a file name then <STRONG>ncurses</STRONG> checks the <STRONG>TERMPATH</STRONG>
- environment variable. This is a list of filenames separated by spaces
+ If <STRONG>TERMCAP</STRONG> does not hold a file name then <STRONG>ncurses</STRONG> checks the <STRONG>TERMPATH</STRONG>
+ environment variable. This is a list of filenames separated by spaces
setuid or setgid permissions:
$TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
</PRE><H2><a name="h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></H2><PRE>
setuid or setgid permissions:
$TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
</PRE><H2><a name="h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></H2><PRE>
- Several different configurations are possible, depending on the
- configure script options used when building <STRONG>ncurses</STRONG>. There are a few
- main options whose effects are visible to the applications developer
+ Several different configurations are possible, depending on the
+ configure script options used when building <STRONG>ncurses</STRONG>. There are a few
+ main options whose effects are visible to the applications developer
- The configure script renames the library and (if the
- <STRONG>--disable-overwrite</STRONG> option is used) puts the header files in a
- different subdirectory. All of the library names have a "w"
+ The configure script renames the library and (if the
+ <STRONG>--disable-overwrite</STRONG> option is used) puts the header files in a
+ different subdirectory. All of the library names have a "w"
appended to them, i.e., instead of
<STRONG>-lncurses</STRONG>
appended to them, i.e., instead of
<STRONG>-lncurses</STRONG>
- You must also enable the wide-character features in the header
- file when compiling for the wide-character library to use the
- extended (wide-character) functions. The symbol which enables
+ You must also enable the wide-character features in the header
+ file when compiling for the wide-character library to use the
+ extended (wide-character) functions. The symbol which enables
- <STRONG>o</STRONG> As of mid-2018, none of the features in this implementation
- require a <STRONG>_XOPEN_SOURCE</STRONG> feature greater than 600. However,
+ <STRONG>o</STRONG> As of mid-2018, none of the features in this implementation
+ require a <STRONG>_XOPEN_SOURCE</STRONG> feature greater than 600. However,
- <STRONG>o</STRONG> Alternatively, you can enable the feature by defining
- <STRONG>NCURSES_WIDECHAR</STRONG> with the caveat that some other header file
- than <STRONG>curses.h</STRONG> may require a specific value for <STRONG>_XOPEN_SOURCE</STRONG>
+ <STRONG>o</STRONG> Alternatively, you can enable the feature by defining
+ <STRONG>NCURSES_WIDECHAR</STRONG> with the caveat that some other header file
+ than <STRONG>curses.h</STRONG> may require a specific value for <STRONG>_XOPEN_SOURCE</STRONG>
- The <STRONG>curses.h</STRONG> file which is installed for the wide-character
- library is designed to be compatible with the normal library's
- header. Only the size of the <STRONG>WINDOW</STRONG> structure differs, and very
+ The <STRONG>curses.h</STRONG> file which is installed for the wide-character
+ library is designed to be compatible with the normal library's
+ header. Only the size of the <STRONG>WINDOW</STRONG> structure differs, and very
few applications require more than a pointer to <STRONG>WINDOW</STRONG>s.
If the headers are installed allowing overwrite, the wide-
few applications require more than a pointer to <STRONG>WINDOW</STRONG>s.
If the headers are installed allowing overwrite, the wide-
- The configure script renames the library. All of the library
- names have a "t" appended to them (before any "w" added by
+ The configure script renames the library. All of the library
+ names have a "t" appended to them (before any "w" added by
<STRONG>--enable-widec</STRONG>).
The global variables such as <STRONG>LINES</STRONG> are replaced by macros to allow
read-only access. At the same time, setter-functions are provided
<STRONG>--enable-widec</STRONG>).
The global variables such as <STRONG>LINES</STRONG> are replaced by macros to allow
read-only access. At the same time, setter-functions are provided
- The shared and normal (static) library names differ by their
- suffixes, e.g., <STRONG>libncurses.so</STRONG> and <STRONG>libncurses.a</STRONG>. The debug and
- profiling libraries add a "_g" and a "_p" to the root names
+ The shared and normal (static) library names differ by their
+ suffixes, e.g., <STRONG>libncurses.so</STRONG> and <STRONG>libncurses.a</STRONG>. The debug and
+ profiling libraries add a "_g" and a "_p" to the root names
- By doing this, it is possible to share the tinfo library between
- wide/normal configurations as well as reduce the size of the
+ By doing this, it is possible to share the tinfo library between
+ wide/normal configurations as well as reduce the size of the
- The <STRONG>trace</STRONG> function normally resides in the debug library, but it
- is sometimes useful to configure this in the shared library.
+ The <STRONG>trace</STRONG> function normally resides in the debug library, but it
+ is sometimes useful to configure this in the shared library.
Configure scripts should check for the function's existence rather
than assuming it is always in the debug library.
</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
Configure scripts should check for the function's existence rather
than assuming it is always in the debug library.
</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
-
-</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> and related pages whose names begin "curs_" for detailed
- routine descriptions.
- <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>
- <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG> for user-defined capabilities
+ <EM>/usr/share/terminfo</EM>
+ compiled terminal capability database
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+ <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> and related pages whose names begin "curs_" for detailed
+ routine descriptions.
+ <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>
+ <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG> for user-defined capabilities
+
</li>
<li><a href="#h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></li>
<li><a href="#h2-FILES">FILES</a></li>
</li>
<li><a href="#h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></li>
<li><a href="#h2-FILES">FILES</a></li>
projects / ncurses.git / blobdiff