+# Most of the `vt100' emulators out there actually emulate a VT102
+# This entry (or vt102-nsgr) is probably the right thing to use for
+# these.
+vt102|DEC VT102,
+ dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
+ use=vt100,
+vt102-w|DEC VT102 in wide mode,
+ cols#132,
+ rs3=\E[?3h, use=vt102,
+
+# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
+# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
+# string in the canonical vt100 entry above leaves the screen littered
+# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
+# after highlight turnoffs. This entry should fix that, and even leave
+# ACS support working, at the cost of making multiple-highlight changes
+# slightly more expensive.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
+vt102-nsgr|VT102 no sgr (use if you see snowflakes after highlight changes),
+ sgr@, sgr0=\E[m, use=vt102,
+
+# VT125 Graphics CRT. Clear screen also erases graphics
+# Some VT125's came configured with VT102 support.
+vt125|VT125 graphics terminal,
+ mir,
+ clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
+
+# This isn't a DEC entry, it came from University of Wisconsin.
+# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
+vt131|DEC VT131,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
+ ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, nel=\r\n, rev=\E[7m$<2/>, ri=\EM$<5/>,
+ rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
+ rmul=\E[m$<2/>,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2/>, smul=\E[4m$<2/>, use=ansi+csr,
+
+# vt132 - like vt100 but slower and has ins/del line and such.
+# I'm told that <smir>/<rmir> are backwards in the terminal from the
+# manual and from the ANSI standard, this describes the actual
+# terminal. I've never actually used a vt132 myself, so this
+# is untested.
+#
+vt132|DEC VT132,
+ xenl,
+ dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
+ ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
+
+# This vt220 description maps F5--F9 to the second block of function keys
+# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
+# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
+# PF1--PF4 are used as F1--F4.
+#
+# added msgr -TD
+vt220-old|vt200-old|DEC VT220 in VT100 emulation mode,
+ OTbs, OTpt, am, mir, msgr, xenl, xon,
+ cols#80, lines#24, vt#3,
+ OTnl=\n,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=\r, cub1=^H,
+ cup=\E[%i%p1%d;%p2%dH$<10>, dch1=\E[P, ed=\E[J$<50>,
+ el=\E[K$<3>, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt100, ind=\ED$<20/>,
+ is2=\E[1;24r\E[24;1H, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
+ kf8=\E[20~, kf9=\E[21~, khome=\E[1~, kich1=\E[2~,
+ rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
+ ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, use=ansi+arrows, use=ansi+csr,
+ use=ansi+idl1, use=ansi+local1, use=vt220+pcedit,
+ use=vt220+cvis,
+
+# Here's a picture of the Sun/PC editing keypad:
+# +--------+--------+--------+
+# | Insert | Home | PageUp |
+# +--------+--------+--------+
+# | Delete | End | PageDn |
+# +--------+--------+--------+
+#
+# VT220 emulators such as xterm, using PC-keyboards use a different layout than
+# the VT220 keyboard:
+# VT220 PC
+# ----- --
+# Prev PageUp
+# Next PageDn
+# Insert Insert
+# Remove Delete
+# Find Home
+# Select End
+vt220+pcedit|editing-keypad for VT220 using PC keyboard,
+ kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~,
+vt220+vtedit|editing-keypad for VT220 using DEC keyboard,
+ kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~,
+
+# A much better description of the VT200/220; used to be vt220-8
+# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
+# designation to accommodate bug in pcvt -TD
+#
+# Here's a picture of the VT220 editing keypad:
+# +--------+--------+--------+
+# | Find | Insert | Remove |
+# +--------+--------+--------+
+# | Select | Prev | Next |
+# +--------+--------+--------+
+#
+# Still, this is a "base" entry. Software emulators commonly leave out the
+# DECTCEM feature -TD
+vt220-base|DEC VT220 as emulated,
+ OTbs, am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
+ dch=\E[%p1%dP, dch1=\E[P, ech=\E[%p1%dX, el1=\E[1K,
+ enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt100, ind=\ED,
+ is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
+ kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, rev=\E[7m, ri=\EM,
+ rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+csr,
+ use=ansi+cup, use=ansi+pp, use=ansi+enq, use=ansi+erase,
+ use=ansi+idl, use=ansi+local, use=vt220+vtedit,
+
+vt220|vt200|DEC VT220,
+ use=vt220+cvis, use=vt220-base,
+vt220-w|vt200-w|DEC VT220 in wide mode,
+ cols#132,
+ rs3=\E[?3h, use=vt220,
+vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode,
+ OTbs, am, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
+ csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
+ cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
+ cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
+ flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
+ ich=\233%p1%d@, if=/usr/share/tabset/vt100,
+ il=\233%p1%dL, il1=\233L, ind=\ED,
+ is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
+ kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
+ kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+ kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
+ kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
+ kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
+ mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
+ rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
+ rmul=\23324m, rs1=\233?3l, sc=\E7,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
+ %?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
+ smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
+
+# vt220d:
+# This VT220 description regards F6--F10 as the second block of function keys
+# at the top of the keyboard. This mapping follows the description given
+# in the VT220 Programmer Reference Manual and agrees with the labeling
+# on some terminals that emulate the VT220. There is no support for an F5.
+# See vt220 for an alternate mapping.
+#
+vt220d|DEC VT220 in VT100 mode with DEC function key labeling,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
+
+vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins,
+ am@,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
+
+# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
+# (not an official DEC entry!)
+# The problem with real VT220 terminals is they don't send escapes when in
+# in VT220 mode. This can be gotten around two ways. 1> don't send
+# escapes or 2> put the VT220 into VT100 mode and use all the nifty
+# features of VT100 advanced video which it then has.
+#
+# This entry takes the view of putting a VT220 into VT100 mode so
+# you can use the escape key in emacs and everything else which needs it.
+#
+# You probably don't want to use this on a VMS machine since VMS will think
+# it has a VT220 and will get fouled up coming out of emacs
+#
+# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
+# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
+# added msgr -TD
+vt200-js|vt220-js|DEC VT200 series with jump scroll,
+ am, msgr,
+ cols#80,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ home=\E[H, ht=^I, il1=\E[L, ind=\ED,
+ is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
+ ?25h\E>\E[m,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smdc=,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
+ use=ansi+csr, use=ansi+erase, use=vt220+cvis,