+# Wyse 370 -- 24 line screen with status line.
+#
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+#
+# If you change keyboards the terminal will send different
+# escape sequences.
+# The following definition is for the basic terminal without
+# function keys.
+#
+# <u0> -> enter Tektronix 4010/4014 mode
+# <u1> -> exit Tektronix 4010/4014 mode
+# <u2> -> enter ASCII mode (from any ANSI mode)
+# <u3> -> exit ASCII mode (goto native ANSI mode)
+# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
+# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
+#
+# Bug: The <op> capability resets attributes.
+wy370-nk|wyse 370 without function keys,
+ am, ccc, hs, mc5i, mir, msgr, xenl, xon,
+ colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
+ dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
+ dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
+ el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
+ flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
+ ind=\n$<2>,
+ initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
+ %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
+ %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
+ %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
+ %{1}%+%+%+%dw,
+ invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
+ is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
+ is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i,
+ oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
+ \E[66;5;51w\E[66;6;61w\E[66;7;64w,
+ op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
+ rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
+ smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
+ u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
+ u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
+#
+# Function key set for the ASCII (wy-50 compatible) keyboard
+# This is the default 370.
+#
+wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
+ kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
+ knp=\E[U, kpp=\E[V, use=wy370-nk,
+#
+# Function key set for the VT-320 (and wy85) compatible keyboard
+#
+wy370-105k|Wyse 370 with 105 key keyboard,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
+ use=wy370-nk, use=vt220+keypad,
+#
+# Function key set for the PC compatible keyboard
+#
+wy370-EPC|Wyse 370 with 102 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
+#
+# Wyse 370 with visual bell.
+wy370-vb|Wyse 370 with visible bell,
+ bel@, use=wy370,
+#
+# Wyse 370 in 132-column mode.
+wy370-w|Wyse 370 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h\E[?3h$<70>, use=wy370,
+#
+# Wyse 370 in 132-column mode with visual bell.
+wy370-wvb|Wyse 370 with visible bell 132-columns,
+ flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
+wy370-rv|Wyse 370 reverse video,
+ rs3=\E[32h\E[?5h, use=wy370,
+#
+# Wyse 99gt Tektronix 4010/4014 emulator,
+#
+wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
+ am, os,
+ cols#74, lines#35,
+ bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
+ cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
+ %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
+ %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
+ %{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+ \037,
+ home=^]7`x @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
+ \037,
+ is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
+#
+# Wyse 160 Tektronix 4010/4014 emulator,
+#
+wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
+ cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
+ %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
+ %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
+ %{31}%&%{64}%+%c\037,
+ home=^]8`g @\037, use=wy99gt-tek,
+#
+# Wyse 370 Tektronix 4010/4014 emulator,
+#
+wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
+ am, os,
+ cols#80, lines#36,
+ bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
+ cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
+ %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
+ %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+ \037,
+ home=^]8g @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
+ \037,
+ is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
+ nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
+
+# Vendor-supplied Wyse entries end here.
+
+#
+#TITLE: TERMINFO ENTRY WY520
+#DATE: 8/5/93
+# The WY520 terminfo is based on the WY285 entry published on the WYSE
+# BBS with the addition of more function keys and special keys.
+#
+# rs1 -> set personality
+# rs2 -> set number of columns
+# rs3 -> set number of lines
+# is1 -> select the proper font
+# is2 -> do the initialization
+# is3 -> If this string is empty then rs3 gets sent.
+#
+# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
+# - The BS key is programmed to generate BS in smcup since
+# is2 doesn't seem to work.
+# - Remove and shift/Remove: delete a character
+# - Insert : enter insert mode
+# - Find : delete to end of file
+# - Select : clear a line
+# - F11, F12, F13: send default sequences (not ESC, BS, LF)
+# - F14 : Home key
+# - Bottom status line (host writable line) is used.
+# - smkx,rmkx are removed because this would put the numeric
+# keypad in Dec application mode which doesn't seem to work
+# with SCO applications.
+#
+wy520|wyse520|wyse 520,
+ am, hs, km, mc5i, mir, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
+ dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
+ ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
+ enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
+ il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
+ kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
+ lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
+ rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
+ smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
+ vpa=\E[%i%p1%dd, use=vt220+keypad,
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+wy520-24|wyse520-24|wyse 520 with 24 data lines,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520,
+#
+# Wyse 520 with visual bell.
+wy520-vb|wyse520-vb|wyse 520 with visible bell,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
+#
+# Wyse 520 in 132-column mode.
+wy520-w|wyse520-w|wyse 520 in 132-column mode,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
+#
+#
+# Wyse 520 emulating a vt420 7 bit mode.
+# The DEL key is programmed to generate BS in is2.
+# With EPC keyboard.
+# - 'End' key will clear till end of line on EPC keyboard
+# - Shift/End : ignored.
+# - Insert : enter insert mode.
+# - Delete : delete a character (have to change interrupt character
+# to CTRL-C: stty intr '^c') for it to work since the
+# Delete key sends 7FH.
+wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
+ kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
+ kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
+ use=wy520,
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+# with EPC keyboard.
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 with visual bell.
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode.
+wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
+#
+# Wyse 520 in 80-column, 36 lines
+wy520-36|wyse520-36|wyse 520 with 36 data lines,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 80-column, 48 lines
+wy520-48|wyse520-48|wyse 520 with 48 data lines,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 132-column, 36 lines
+wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36,
+#
+# Wyse 520 in 132-column, 48 lines
+wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48,
+#
+#
+# Wyse 520 in 80-column, 36 lines with EPC keyboard
+wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 80-column, 48 lines with EPC keyboard
+wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 132-column, 36 lines with EPC keyboard
+wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36pc,
+#
+# Wyse 520 in 132-column, 48 lines with EPC keyboard
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48pc,
+
+# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
+# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
+# file and we don't know what <hts> is -- esr)
+wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
+ dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
+ is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
+ kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
+ rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
+ smul=^N,
+
+wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
+ is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
+ use=wy75,
+
+# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
+wy100q|Wyse 100 for Quotron,
+ OTbs,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
+ is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
+
+#### Kermit terminal emulations
+#
+# Obsolete Kermit versions may be listed in the section describing obsolete
+# non-ANSI terminal emulators later in the file.
+#
+
+# KERMIT standard all versions.
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 9-25-84
+kermit|standard kermit,
+ OTbs,
+ cols#80, lines#24,
+ clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
+kermit-am|standard kermit plus auto-margin,
+ am,
+ is2=K1 Standard Kermit plus Automatic Margins\n,
+ use=kermit,
+# IBMPC Kermit 1.2.
+# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
+# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
+# line).
+# From: greg small <gts@populi.berkeley.edu> 8-30-84
+pckermit|pckermit12|UCB IBMPC Kermit 1.2,
+ am,
+ lines#25,
+ clear=\EH\EJ, ed@, el@,
+ is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
+# IBMPC Kermit 1.20
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Cannot use character insert because 1.20 goes crazy if insert at col 80.
+# Does not use :am: because autowrap is lost when kermit dropped and restarted.
+# From: greg small <gts@populi.berkeley.edu> 12-19-84
+pckermit120|UCB IBMPC Kermit 1.20,
+ it#8, lines#24,
+ cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
+ il1=\EL,
+ is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
+ \n,
+ rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
+# MS-DOS Kermit 2.27 for the IBMPC
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Does not use am: because autowrap is lost when kermit dropped and restarted.
+# Reverse video for standout like H19.
+# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
+ OTbs, am@,
+ cols#80, it#8, lines#24,
+ clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, il1=\EL,
+ is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
+ \sIBMPC\s3-17-85\n,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
+ rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
+# MS-DOS Kermit 2.27 with automatic margins
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
+ am,
+ cvvis=\EO\Eq\EG\EvK5,
+ is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
+ \smargins\s3-17-85\n,
+ use=msk227,
+# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
+# Automatic margins now default. Use ansi <sgr> for highlights.
+# Define function keys.
+# (msk22714: removed obsolete ":kn#10:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
+ am,
+ bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
+ is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
+ \sIBM\sPC\s3-17-85\n,
+ kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
+ kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
+# This was designed for a VT320 emulator, but it is probably a good start
+# at support for the VT320 itself.
+# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
+# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+vt320-k3|MS-Kermit 3.00's vt320 emulation,
+ am, eslok, hs, km, mir, msgr, xenl,
+ cols#80, it#8, lines#49, pb#9600, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
+ ?5l,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
+ \E[4i\E[?4i\E[m\E[r\E[2$~,
+ sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
+# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
+# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
+# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
+vt320-k311|dec vt320 series as defined by kermit 3.11,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
+ ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
+ lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
+ smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
+
+######## NON-ANSI TERMINAL EMULATIONS
+#
+
+#### Avatar
+#
+# These entries attempt to describe Avatar, a terminal emulation used with
+# MS-DOS bulletin-board systems. It was designed to give ANSI-like
+# capabilities, but with cheaper (shorter) control sequences. Messy design,
+# excessively dependent on PC idiosyncrasies, but apparently rather popular
+# in the BBS world.
+#
+# No color support. Avatar doesn't fit either of the Tektronix or HP color
+# models that terminfo knows about. An Avatar color attribute is the
+# low 7 bits of the IBM-PC display-memory attribute. Bletch.
+#
+# I wrote these entries while looking at the Avatar spec. I don't have
+# the facilities to test them. Let me know if they work, or don't.
+#
+# Avatar escapes not used by these entries (because maybe you're smarter
+# and more motivated than I am and can figure out how to wrap terminfo
+# around some of them, and because they are weird enough to be funny):
+# level 0:
+# ^L -- clear window/reset current attribute to default
+# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
+#
+# bit: 6 5 4 3 2 1 0
+# | | | | |
+# +---+---+ | +---+---+
+# | | |
+# | | foreground color
+# | foreground intensity
+# background color
+# level 0+:
+# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
+# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
+# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
+# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
+# (^V^L and ^V^M set the current attribute as a side-effect.)
+# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
+# in the pattern, <c> the number of times the pattern
+# should be repeated. If either value is 0, no-op.
+# The pattern can contain Avatar console codes,
+# including other ^V ^Y patterns.
+# level 1:
+# ^V^O -- clockwise mode on; turn print direction right each time you
+# hit a window edge (yes, really). Turned off by CR
+# ^V^P -- no-op
+# ^V^Q%c -- query the driver
+# ^V^R -- driver reset
+# ^V^S -- Sound tone (PC-specific)
+# ^V^T -- change highlight at current cursor position to %c
+# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
+# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
+# -- define window
+#
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
+# tell ncurses that the corresponding highlights exist; it should use <sgr>,
+# which is the only method that will actually work for multiple highlights.)
+#
+# Update by TD - 2004: half of this was inconsistent. Found documentation
+# and repaired most of the damage. sgr0 is probably incorrect, but the
+# available documentation gives no clues for a workable string.
+avatar0|avatar terminal emulator level 0,
+ am, bce, msgr,
+ cols#80, it#8, lines#25,
+ blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
+ cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
+ ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
+ rmacs@, rs2=^L,
+ sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
+ %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
+ %{16}%|%;%;%c%;%?%p4%t\026\002%;,
+ sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
+ use=klone+acs,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar0+|avatar terminal emulator level 0+,
+ dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar|avatar1|avatar terminal emulator level 1,
+ civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
+ rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
+
+#### RBcomm
+#
+# RBComm is a lean and mean terminal emulator written by the Interrupt List
+# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
+# '90s), especially in the BBS world, and still has some loyal users due to
+# its very small memory footprint and to a cute macro language.
+rbcomm|IBM PC with RBcomm and EMACS keybindings,
+ am, bw, mir, msgr, xenl,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^C, cuf1=^B,
+ cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
+ dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
+ il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
+ kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
+ rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
+ rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
+ rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
+ smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
+rbcomm-nam|IBM PC with RBcomm without autowrap,
+ am@,
+ bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
+rbcomm-w|IBM PC with RBcomm in 132 column mode,
+ cols#132,
+ bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
+
+######## LCD DISPLAYS
+#
+
+#### Matrix Orbital
+# from: Eric Z. Ayers (eric@ale.org)
+#
+# Matrix Orbital 20x4 LCD display
+# Command Character is 0xFE (decimal 254, octal 376)
+#
+# On this device, cursor addressability isn't possible. The LCD expects:
+# 0xfe G <col> <row>
+# for cup: %p1 == row and %p2 is column
+#
+# This line:
+# cup=\376G%p2%c%p1%c
+# LOOKS like it will work, but sometimes only one of the two numbers is sent.
+# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
+#
+# Alas, there is no cursor upline capability on this display.
+#
+# These entries add some 'sanity stuff' to the clear function. That is, it
+# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
+# and turns off the cursor blinking and stuff like that.
+#
+# NOTE: calling 'beep' turns on the backlight (bell)
+# NOTE: calling 'flash' turns it on and back off (visual bell)
+#
+MtxOrb|Generic Matrix Orbital LCD display,
+ bel=\376B\001, clear=\376X\376C\376R\376K\376T,
+ cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
+ flash=\376B\001$<200>\376F, home=\376H,
+MtxOrb204|20x4 Matrix Orbital LCD display,
+ cols#20, lines#4, use=MtxOrb,
+MtxOrb162|16x2 Matrix Orbital LCD display,
+ cols#16, lines#2, use=MtxOrb,
+# The end
+
+######## OLDER TERMINAL TYPES
+#
+# This section is devoted to older commercial terminal brands that are now
+# discontinued, but known to be still in use or represented by emulations.
+#
+
+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries. All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
+ am, eo, mir, msgr, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
+ kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
+ kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
+ kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
+ smso=\E[7m,
+att2350|AT&T 2350 Video Information Terminal 80 column mode,
+ mc0@, mc4@, mc5@, use=att2300,
+
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities:
+# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
+# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
+ am, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
+ z{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
+ dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
+ is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
+ \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
+ \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
+ \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
+ \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
+ \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
+ \s\s\s\EOW,
+ kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
+ kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
+ ll=\E[24H, nel=\r\n,
+ pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%p1%{1}%+%dH,
+
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
+
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
+ OTbs,
+ pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
+ use=att5410v1,
+
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
+ il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+
+#
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
+#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
+# <hpa>, <hts> would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# <is1> sets 80 column mode,
+# <is2> escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+# insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+# 1 2 3 4 5 6 7 8
+# <is3> set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This <rmcup> is not strictly necessary, but it helps maximize
+# memory usefulness: <rmcup=\Ez>,
+# Alternate sgr0: <sgr0=\E[m\EW^O>,
+# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings <kf1>-<kf8>
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
+ OTbs, db, mir, xon,
+ lh#2, lm#78, lw#8, nlab#8, wsl#55,
+ cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
+ cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
+ cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
+ dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
+ flash=\E[?5h$<200>\E[?5l, home=\E[x,
+ hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
+ il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
+ \E[4i\Ex\E[21;1j\212,
+ is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
+ mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
+ rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+ use=att4410,