-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<!--
* t
* DO NOT EDIT THIS FILE BY HAND!
* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2013,2016 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.20 2013/03/02 23:52:37 tom Exp @
+ * @Id: terminfo.head,v 1.22 2016/10/15 17:02:31 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.61 2013/03/03 00:06:39 tom Exp @
+ * @Id: terminfo.tail,v 1.75 2016/12/24 22:54:11 tom Exp @
* Beginning of terminfo.tail file
* This file is part of ncurses.
* See "terminfo.head" for copyright.
*.in +2
*.TH
-->
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
+<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
<TITLE>terminfo 5 File Formats</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
-<H1>terminfo 5 File Formats</H1>
-<HR>
+<H1 class="no-header">terminfo 5 File Formats</H1>
<PRE>
-<!-- Manpage converted by man2html 3.0.1 -->
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> File Formats <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
-</PRE>
-<H2>NAME</H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
terminfo - terminal capability data base
-</PRE>
-<H2>SYNOPSIS</H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
/usr/share/terminfo/*/*
-</PRE>
-<H2>DESCRIPTION</H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
<EM>Terminfo</EM> is a data base describing terminals, used by
- screen-oriented programs such as <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>, <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG> and
+ screen-oriented programs such as <STRONG>nvi(1)</STRONG>, <STRONG>rogue(1)</STRONG> and
libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. <EM>Terminfo</EM> describes termi-
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
fying padding requirements and initialization sequences.
- This describes <STRONG>ncurses</STRONG> version 5.9 (patch 20130309).
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20161231).
Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
manual page.
- <STRONG>Predefined</STRONG> <STRONG>Capabilities</STRONG>
+
+</PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
The following is a complete table of the capabilities
included in a terminfo description block and available to
terminfo-using code. In each line of the table,
status_line_esc_ok eslok es escape can be used
on the status line
tilde_glitch hz hz cannot print ~'s
- (hazeltine)
+ (Hazeltine)
transparent_underline ul ul underline character
color-pairs on the
screen
maximum_windows wnum MW maximum number of
- defineable windows
+ definable windows
no_color_video ncv NC video attributes
that cannot be used
with colors
multiple codesets
color_names colornm Yw Give name for
color #1
- define_bit_image_region defbi Yx Define rectan-
- gualar bit image
- region
+ define_bit_image_region defbi Yx Define rectangular
+ bit image region
device_type devt dv Indicate lan-
guage/codeset sup-
port
set_page_length slines YZ Set page length to
#1 lines
+
set_tb_margin smgtb MT Sets both top and
bottom margins to
#1, #2
- The XSI Curses standard added these hardcopy capabili-
+ The XSI Curses standard added these hardcopy capabili-
ties. They were used in some post-4.1 versions of System
V curses, e.g., Solaris 2.5 and IRIX 6.x. Except for <STRONG>YI</STRONG>,
the <STRONG>ncurses</STRONG> termcap names for them are invented. Accord-
- ing to the XSI Curses standard, they have no termcap
+ ing to the XSI Curses standard, they have no termcap
names. If your compiled terminfo entries use these, they
- may not be binary-compatible with System V terminfo
+ may not be binary-compatible with System V terminfo
entries after SVr4.1; beware!
tations use sL for
termcap).
- <STRONG>User-Defined</STRONG> <STRONG>Capabilities</STRONG>
- The preceding section listed the <EM>predefined</EM> capabilities.
- They deal with some special features for terminals no
- longer (or possibly never) produced. Occasionally there
- are special features of newer terminals which are awkward
+
+</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
+ The preceding section listed the <EM>predefined</EM> capabilities.
+ They deal with some special features for terminals no
+ longer (or possibly never) produced. Occasionally there
+ are special features of newer terminals which are awkward
or impossible to represent by reusing the predefined capa-
bilities.
<STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
capabilities. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG>
- option for this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats
- unknown capabilities as user-defined. That is, if <STRONG>tic</STRONG>
- encounters a capability name which it does not recognize,
- it infers its type (boolean, number or string) from the
+ option for this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats
+ unknown capabilities as user-defined. That is, if <STRONG>tic</STRONG>
+ encounters a capability name which it does not recognize,
+ it infers its type (boolean, number or string) from the
syntax and makes an extended table entry for that capabil-
- ity. The <STRONG>use_extended_names</STRONG> function makes this informa-
+ ity. The <STRONG>use_extended_names</STRONG> function makes this informa-
tion conditionally available to applications. The ncurses
- library provides the data leaving most of the behavior to
+ library provides the data leaving most of the behavior to
applications:
<STRONG>o</STRONG> User-defined capability strings whose name begins with
"k" are treated as function keys.
- <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG>
+ <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG>
can be inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
- <STRONG>o</STRONG> If the capability name happens to be two characters,
- the capability is also available through the termcap
+ <STRONG>o</STRONG> If the capability name happens to be two characters,
+ the capability is also available through the termcap
interface.
While termcap is said to be extensible because it does not
- use a predefined set of capabilities, in practice it has
- been limited to the capabilities defined by terminfo
- implementations. As a rule, user-defined capabilities
+ use a predefined set of capabilities, in practice it has
+ been limited to the capabilities defined by terminfo
+ implementations. As a rule, user-defined capabilities
intended for use by termcap applications should be limited
- to booleans and numbers to avoid running past the 1023
- byte limit assumed by termcap implementations and their
- applications. In particular, providing extended sets of
- function keys (past the 60 numbered keys and the handful
+ to booleans and numbers to avoid running past the 1023
+ byte limit assumed by termcap implementations and their
+ applications. In particular, providing extended sets of
+ function keys (past the 60 numbered keys and the handful
of special named keys) is best done using the longer names
available using terminfo.
- <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
+
+</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
The following entry, describing an ANSI-standard terminal,
- is representative of what a <STRONG>terminfo</STRONG> entry for a modern
+ is representative of what a <STRONG>terminfo</STRONG> entry for a modern
terminal typically looks like.
- ansi|ansi/pc-term compatible with color,
- mc5i,
- colors#8, ncv#3, pairs#64,
- cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
- cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
- ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%p1%dG, ht=\E[I,
- ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, .indn=\E[%p1%dT,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf1=\E[M, kf10=\E[V,
- kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P,
- kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
- kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
- op=\E[37;40m, rep=%p1%c\E[%p2%{1}%-%db,
- rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B,
- s3ds=\E+B, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m,
- sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
- u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
-
- Entries may continue onto multiple lines by placing white
- space at the beginning of each line except the first.
- Comments may be included on lines beginning with "#".
+ ansi|ansi/pc-term compatible with color,
+ am, mc5i, mir, msgr,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260
+ j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303
+ u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=\E[I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+ mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, op=\E[39;49m,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rin=\E[%p1%dT,
+ rmacs=\E[10m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
+ s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;
+ %?%p2%t;4%;
+ %?%p3%t;7%;
+ %?%p4%t;5%;
+ %?%p6%t;1%;
+ %?%p7%t;8%;
+ %?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
+
+ Entries may continue onto multiple lines by placing white
+ space at the beginning of each line except the first.
+ Comments may be included on lines beginning with "#".
Capabilities in <EM>terminfo</EM> are of three types:
- <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal
+ <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal
has some particular feature,
- <STRONG>o</STRONG> numeric capabilities giving the size of the terminal
+ <STRONG>o</STRONG> numeric capabilities giving the size of the terminal
or the size of particular delays, and
- <STRONG>o</STRONG> string capabilities, which give a sequence which can
+ <STRONG>o</STRONG> string capabilities, which give a sequence which can
be used to perform particular terminal operations.
- <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
- All capabilities have names. For instance, the fact that
- ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
- automatic return and line-feed when the end of a line is
- reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
+
+</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
+ All capabilities have names. For instance, the fact that
+ ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
+ automatic return and line-feed when the end of a line is
+ reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
- followed by the character `#' and then a positive value.
- Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
- minal has, gives the value `80' for ansi. Values for
+ followed by the character "#" and then a positive value.
+ Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
+ minal has, gives the value "80" for ansi. Values for
numeric capabilities may be specified in decimal, octal or
- hexadecimal, using the C programming language conventions
+ hexadecimal, using the C programming language conventions
(e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
+ Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
end of line sequence) are given by the two-character code,
- an `=', and then a string ending at the next following
- `,'.
+ an "=", and then a string ending at the next following
+ ",".
- A number of escape sequences are provided in the string
+ A number of escape sequences are provided in the string
valued capabilities for easy encoding of characters there.
- Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
- control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
- <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
+ Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
+ control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
+ <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
backspace, form-feed, and space. Other escapes include
<STRONG>o</STRONG> <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
<STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
- <STRONG>\0</STRONG> will produce \200, which does not terminate a
- string but behaves as a null character on most termi-
- nals, providing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.
+ <STRONG>\0</STRONG> will produce \200, which does not terminate a
+ string but behaves as a null character on most termi-
+ nals, providing CS7 is specified. See <STRONG>stty(1)</STRONG>.
- The reason for this quirk is to maintain binary com-
- patibility of the compiled terminfo files with other
- implementations, e.g., the SVr4 systems, which docu-
- ment this. Compiled terminfo files use null-termi-
- nated strings, with no lengths. Modifying this would
+ The reason for this quirk is to maintain binary com-
+ patibility of the compiled terminfo files with other
+ implementations, e.g., the SVr4 systems, which docu-
+ ment this. Compiled terminfo files use null-termi-
+ nated strings, with no lengths. Modifying this would
require a new binary format, which would not work with
other implementations.
- Finally, characters may be given as three octal digits
+ Finally, characters may be given as three octal digits
after a <STRONG>\</STRONG>.
- A delay in milliseconds may appear anywhere in a string
- capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
- and padding characters are supplied by <EM>tputs</EM> to provide
- this delay. The delay must be a number with at most one
- decimal place of precision; it may be followed by suffixes
- `*' or '/' or both. A `*' indicates that the padding
- required is proportional to the number of lines affected
- by the operation, and the amount given is the per-
- affected-unit padding required. (In the case of insert
- character, the factor is still the number of <EM>lines</EM>
- affected.) Normally, padding is advisory if the device
- has the <STRONG>xon</STRONG> capability; it is used for cost computation
- but does not trigger delays. A `/' suffix indicates that
- the padding is mandatory and forces a delay of the given
- number of milliseconds even on devices for which <STRONG>xon</STRONG> is
- present to indicate flow control.
+ A delay in milliseconds may appear anywhere in a string
+ capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
+ and padding characters are supplied by <STRONG>tputs</STRONG> to provide
+ this delay.
+
+ <STRONG>o</STRONG> The delay must be a number with at most one decimal
+ place of precision; it may be followed by suffixes "*"
+ or "/" or both.
+
+ <STRONG>o</STRONG> A "*" indicates that the padding required is propor-
+ tional to the number of lines affected by the opera-
+ tion, and the amount given is the per-affected-unit
+ padding required. (In the case of insert character,
+ the factor is still the number of <EM>lines</EM> affected.)
+
+ Normally, padding is advisory if the device has the
+ <STRONG>xon</STRONG> capability; it is used for cost computation but
+ does not trigger delays.
+
+ <STRONG>o</STRONG> A "/" suffix indicates that the padding is mandatory
+ and forces a delay of the given number of milliseconds
+ even on devices for which <STRONG>xon</STRONG> is present to indicate
+ flow control.
Sometimes individual capabilities must be commented out.
To do this, put a period before the capability name. For
example, see the second <STRONG>ind</STRONG> in the example above.
- <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
+
+</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
several places. It uses only the first description found.
The library has a compiled-in list of places to search
database files) to be searched.
An empty directory name (i.e., if the variable begins
- or ends with a colon, or contains adacent colons) is
+ or ends with a colon, or contains adjacent colons) is
interpreted as the system location <EM>/usr/share/ter-</EM>
<EM>minfo</EM>.
<STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM>
(the compiled-in default).
- <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
+
+</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
We now outline how to prepare descriptions of terminals.
The most effective way to prepare a terminal description
is by imitating the description of a similar terminal in
To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the `u' key several times
+ middle of the screen, then hit the "u" key several times
quickly. If the terminal messes up, more padding is usu-
ally needed. A similar test can be used for insert char-
acter.
- <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
+
+</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
The number of columns on each line for the terminal is
given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
a CRT, then the number of lines on the screen is given by
as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
cursor motions should not alter the text they pass over,
- for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
+ for example, you would not normally use "<STRONG>cuf1</STRONG>= " because
the space would erase the character moved over.
A very important point here is that the local cursor
described as
33|tty33|tty|model 33 teletype,
- bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
+ bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
while the Lear Siegler ADM-3 is described as
adm3|3|lsi adm3,
- am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
- ind=^J, lines#24,
+ am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
+ ind=^J, lines#24,
- <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
+
+</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
Cursor addressing and other strings requiring parameters
in the terminal are described by a parameterized string
- capability, with <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
- example, to address the cursor, the <STRONG>cup</STRONG> capability is
+ capability, with <EM>printf</EM>-like escapes such as <EM>%x</EM> in it.
+ For example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
The <STRONG>%</STRONG> encodings have the following meanings:
- %% outputs `%'
+ <STRONG>%%</STRONG> outputs "%"
- %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are [-+#] and space. Use a `:'
- to allow the next character to be a `-' flag, avoid-
+ <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
+ as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":"
+ to allow the next character to be a "-" flag, avoid-
ing interpreting "%-" as an operator.
- %c print pop() like %c in <STRONG>printf</STRONG>
+ %c print <EM>pop()</EM> like %c in <STRONG>printf</STRONG>
- %s print pop() like %s in <STRONG>printf</STRONG>
+ <STRONG>%s</STRONG> print <EM>pop()</EM> like %s in <STRONG>printf</STRONG>
- %p[1-9]
+ <STRONG>%p</STRONG><EM>[1-9]</EM>
push <EM>i</EM>'th parameter
- %P[a-z]
- set dynamic variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[a-z]</EM>
+ set dynamic variable <EM>[a-z]</EM> to <EM>pop()</EM>
- %g[a-z]
- get dynamic variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[a-z]/</EM>
+ get dynamic variable <EM>[a-z]</EM> and push it
- %P[A-Z]
- set static variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[A-Z]</EM>
+ set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
- %g[A-Z]
- get static variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[A-Z]</EM>
+ get static variable <EM>[a-z]</EM> and push it
The terms "static" and "dynamic" are misleading.
Historically, these are simply two different sets of
other implementations. Relying on it will adversely
impact portability to other implementations.
- %'<EM>c</EM>' char constant <EM>c</EM>
+ <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
- %{<EM>nn</EM>}
+ <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
integer constant <EM>nn</EM>
- %l push strlen(pop)
+ <STRONG>%l</STRONG> push strlen(pop)
- %+ %- %* %/ %m
- arithmetic (%m is mod): push(pop() op pop())
+ <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
+ arithmetic (%m is <EM>mod</EM>): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %& %| %^
- bit operations (AND, OR and exclusive-OR): push(pop()
- op pop())
+ <STRONG>%&</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
+ bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM>
+ <EM>op</EM> <EM>pop())</EM>
- %= %> %<
- logical operations: push(pop() op pop())
+ <STRONG>%=</STRONG>, <STRONG>%></STRONG>, <STRONG>%<</STRONG>
+ logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %A, %O
+ <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
logical AND and OR operations (for conditionals)
- %! %~
+ <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
unary operations (logical and bit complement):
- push(op pop())
+ <EM>push(op</EM> <EM>pop())</EM>
- %i add 1 to first two parameters (for ANSI terminals)
+ <STRONG>%i</STRONG> add 1 to first two parameters (for ANSI terminals)
- %? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
- This forms an if-then-else. The %e <EM>elsepart</EM> is
- optional. Usually the %? <EM>expr</EM> part pushes a value
- onto the stack, and %t pops it from the stack, test-
+ <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
+ This forms an if-then-else. The <STRONG>%e</STRONG> <EM>elsepart</EM> is
+ optional. Usually the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value
+ onto the stack, and <STRONG>%t</STRONG> pops it from the stack, test-
ing if it is nonzero (true). If it is zero (false),
- control passes to the %e (else) part.
+ control passes to the <STRONG>%e</STRONG> (else) part.
It is possible to form else-if's a la Algol 68:
- %? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
+ <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
where ci are conditions, bi are bodies.
Binary operations are in postfix form with the operands in
the usual order. That is, to get x-5 one would use
- "%gx%{5}%-". %P and %g variables are persistent across
+ "%gx%{5}%-". <STRONG>%P</STRONG> and <STRONG>%g</STRONG> variables are persistent across
escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12,
A final example is the LSI ADM-3a, which uses row and col-
umn offset by a blank character, thus "cup=\E=%p1%'
- '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
+ '%+%c%p2%' '%+%c". After sending "\E=", this pushes the
first parameter, pushes the ASCII value for a space (32),
adds them (pushing the sum on the stack in place of the
two previous values) and outputs that value as a charac-
ter. Then the same is done for the second parameter.
More complex arithmetic is possible using the stack.
- <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
+
+</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
If the terminal has a fast way to home the cursor (to very
upper left corner of screen) then this can be given as
<STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
<STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
<STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
- <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
+
+</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
If the terminal can clear from the current position to the
end of the line, leaving the cursor where it is, this
should be given as <STRONG>el</STRONG>. If the terminal can clear from the
(Thus, it can be simulated by a request to delete a large
number of lines, if a true <STRONG>ed</STRONG> is not available.)
- <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
+
+</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
If the terminal can open a new blank line before the line
where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
done only from the first position of a line. The cursor
late destructive scrolling; their documentation cautions
you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
implementation is more liberal and will do explicit erases
- after scrolling if <STRONG>ndstr</STRONG> is defined.
+ after scrolling if <STRONG>ndsrc</STRONG> is defined.
If the terminal has the ability to define a window as part
of memory, which all commands affect, it should be given
lines up from below or that scrolling back with <STRONG>ri</STRONG> may
bring down non-blank lines.
- <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+
+</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
There are two basic kinds of intelligent terminals with
respect to insert/delete character which can be described
using <EM>terminfo.</EM> The most common insert/delete character
milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
which may need to be sent after an insert of a single
character may also be given in <STRONG>ip</STRONG>. If your terminal needs
- both to be placed into an `insert mode' and a special code
+ both to be placed into an "insert mode" and a special code
to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
capability, with one parameter, <EM>n</EM>, will repeat the effects
<EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
with one parameter.
- <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
+
+</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
If your terminal has one or more kinds of display
attributes, these can be represented in a number of dif-
ferent ways. You should choose one display form as <EM>stand-</EM>
<STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
-
\E[0 always \E[0
;1 if p1 or p6 %?%p1%p6%|%t;1%;
;4 if p2 %?%p2%|%t;4%;
Putting this all together into the sgr sequence gives:
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
- %?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
+ %?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
Remember that if you specify sgr, you must also specify
sgr0. Also, some implementations rely on sgr being given
erasable with a blank, then this should be indicated by
giving <STRONG>eo</STRONG>.
- <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
+
+</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
If the terminal has a keypad that transmits codes when the
keys are pressed, this information can be given. Note
that it is not possible to handle terminals where the key-
or more pln sequences to make sure that the change becomes
visible.
- <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
+
+</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
If the terminal has hardware tabs, the command to advance
to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
I). A "back-tab" command which moves leftward to the pre-
initially set every <EM>n</EM> spaces when the terminal is powered
up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
of spaces the tabs are set to. This is normally used by
- the <EM>tset</EM> command to determine whether to set the mode for
+ the <STRONG>tset</STRONG> command to determine whether to set the mode for
hardware tab expansion, and whether to set the tab stops.
If the terminal has tab stops that can be saved in non-
volatile memory, the terminfo description can assume that
These strings are expected to set the terminal into modes
consistent with the rest of the terminfo description.
They are normally sent to the terminal, by the <EM>init</EM> option
- of the <EM>tput</EM> program, each time the user logs in. They
+ of the <STRONG>tput</STRONG> program, each time the user logs in. They
will be printed in the following order:
run the program
A set of sequences that does a harder reset from a totally
unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
- strings are output by the <EM>reset</EM> program, which is used
+ strings are output by the <STRONG>reset</STRONG> program, which is used
when the terminal gets into a wedged state. Commands are
normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
duce annoying effects on the screen and are not necessary
normally needed since the terminal is usually already in
80 column mode.
- The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
+ The <STRONG>reset</STRONG> program writes strings including <STRONG>iprog</STRONG>, etc., in
the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
instead of <STRONG>is1</STRONG>, etc. If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
- capability strings are missing, the <EM>reset</EM> program falls
+ capability strings are missing, the <STRONG>reset</STRONG> program falls
back upon the corresponding initialization capability
string.
described by this, the sequence can be placed in <STRONG>is2</STRONG> or
<STRONG>if</STRONG>.
- <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
+
+</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
Many older and slower terminals do not support either
XON/XOFF or DTR handshaking, including hard copy terminals
and some very archaic CRTs (including, for example, DEC
ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
first character of the <STRONG>pad</STRONG> string is used.
- <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
- Some terminals have an extra `status line' which is not
+
+</PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
+ Some terminals have an extra "status line" which is not
normally used by software (and thus not counted in the
terminal's <STRONG>lines</STRONG> capability).
capabilities. They are documented here in case they ever
become important.
- <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
+
+</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
Many terminals have alternate character sets useful for
forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
the drawing characters supported by the VT100, with some
acter pairs right to left in sequence; these become the
ACSC string.
- <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
- Most color terminals are either `Tektronix-like' or `HP-
- like'. Tektronix-like terminals have a predefined set of
- N colors (where N usually 8), and can set character-cell
- foreground and background characters independently, mixing
- them into N * N color-pairs. On HP-like terminals, the
- use must set each color pair up separately (foreground and
- background are not independently settable). Up to M
- color-pairs may be set up from 2*M different colors.
- ANSI-compatible terminals are Tektronix-like.
+
+</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
+ The curses library functions <STRONG>init_pair</STRONG> and <STRONG>init_color</STRONG>
+ manipulate the <EM>color</EM> <EM>pairs</EM> and <EM>color</EM> <EM>values</EM> discussed in
+ this section (see <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> for details on these and
+ related functions).
+
+ Most color terminals are either "Tektronix-like" or "HP-
+ like":
+
+ <STRONG>o</STRONG> Tektronix-like terminals have a predefined set of <EM>N</EM>
+ colors (where <EM>N</EM> is usually 8), and can set character-
+ cell foreground and background characters indepen-
+ dently, mixing them into <EM>N</EM> * <EM>N</EM> color-pairs.
+
+ <STRONG>o</STRONG> On HP-like terminals, the user must set each color
+ pair up separately (foreground and background are not
+ independently settable). Up to <EM>M</EM> color-pairs may be
+ set up from 2*<EM>M</EM> different colors. ANSI-compatible
+ terminals are Tektronix-like.
Some basic color capabilities are independent of the color
method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
- the maximum numbers of colors and color-pairs that can be
- displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
- resets foreground and background colors to their default
- values for the terminal. The <STRONG>oc</STRONG> string resets all colors
- or color-pairs to their default values for the terminal.
- Some terminals (including many PC terminal emulators)
- erase screen areas with the current background color
- rather than the power-up default background; these should
+ the maximum numbers of colors and color-pairs that can be
+ displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
+ resets foreground and background colors to their default
+ values for the terminal. The <STRONG>oc</STRONG> string resets all colors
+ or color-pairs to their default values for the terminal.
+ Some terminals (including many PC terminal emulators)
+ erase screen areas with the current background color
+ rather than the power-up default background; these should
have the boolean capability <STRONG>bce</STRONG>.
- To change the current foreground or background color on a
- Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
- and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
- and <STRONG>setb</STRONG> (set background). These take one parameter, the
- color number. The SVr4 documentation describes only
- <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
- supports ANSI escape sequences to set background and fore-
- ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
- tively. If the terminal supports other escape sequences
- to set background and foreground, they should be coded as
- <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
- the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
- defined."
+ While the curses library works with <EM>color</EM> <EM>pairs</EM> (reflect-
+ ing the inability of some devices to set foreground and
+ background colors independently), there are separate capa-
+ bilities for setting these features:
+
+ <STRONG>o</STRONG> To change the current foreground or background color
+ on a Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI
+ foreground) and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG>
+ (set foreground) and <STRONG>setb</STRONG> (set background). These
+ take one parameter, the color number. The SVr4 docu-
+ mentation describes only <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft
+ says that "If the terminal supports ANSI escape
+ sequences to set background and foreground, they
+ should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respectively.
+
+ <STRONG>o</STRONG> If the terminal supports other escape sequences to set
+ background and foreground, they should be coded as
+ <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <STRONG>vidputs</STRONG> and the
+ <STRONG>refresh</STRONG> functions use the <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> capabilities
+ if they are defined.
The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
numeric argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>
On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
parameter to set which color pair is current.
- On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
- present to indicate that colors can be modified. If so,
- the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
- - 1)and three more parameters which describe the color.
- These three parameters default to being interpreted as RGB
- (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
- is present, they are instead as HLS (Hue, Lightness, Satu-
- ration) indices. The ranges are terminal-dependent.
-
- On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
- changing a color-pair value. It will take seven parame-
- ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
- triples describing first background and then foreground
- colors. These parameters must be (Red, Green, Blue) or
- (Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
+ Some terminals allow the <EM>color</EM> <EM>values</EM> to be modified:
+
+ <STRONG>o</STRONG> On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may
+ be present to indicate that colors can be modified.
+ If so, the <STRONG>initc</STRONG> capability will take a color number
+ (0 to <STRONG>colors</STRONG> - 1)and three more parameters which
+ describe the color. These three parameters default to
+ being interpreted as RGB (Red, Green, Blue) values.
+ If the boolean capability <STRONG>hls</STRONG> is present, they are
+ instead as HLS (Hue, Lightness, Saturation) indices.
+ The ranges are terminal-dependent.
+
+ <STRONG>o</STRONG> On an HP-like terminal, <STRONG>initp</STRONG> may give a capability
+ for changing a color-pair value. It will take seven
+ parameters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1),
+ and two triples describing first background and then
+ foreground colors. These parameters must be (Red,
+ Green, Blue) or (Hue, Lightness, Saturation) depending
+ on <STRONG>hls</STRONG>.
On some color terminals, colors collide with highlights.
You can register these collisions with the <STRONG>ncv</STRONG> capability.
ors are enabled. The correspondence with the attributes
understood by <STRONG>curses</STRONG> is as follows:
- <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG>
- A_STANDOUT 0 1
- A_UNDERLINE 1 2
- A_REVERSE 2 4
- A_BLINK 3 8
- A_DIM 4 16
- A_BOLD 5 32
- A_INVIS 6 64
- A_PROTECT 7 128
- A_ALTCHARSET 8 256
+ <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
+ A_STANDOUT 0 1 sgr
+ A_UNDERLINE 1 2 sgr
+ A_REVERSE 2 4 sgr
+ A_BLINK 3 8 sgr
+ A_DIM 4 16 sgr
+ A_BOLD 5 32 sgr
+ A_INVIS 6 64 sgr
+ A_PROTECT 7 128 sgr
+ A_ALTCHARSET 8 256 sgr
+ A_HORIZONTAL 9 512 sgr1
+ A_LEFT 10 1024 sgr1
+ A_LOW 11 2048 sgr1
+ A_RIGHT 12 4096 sgr1
+ A_TOP 13 8192 sgr1
+ A_VERTICAL 14 16384 sgr1
+ A_ITALIC 15 32768 sitm
For example, on many IBM PC consoles, the underline
attribute collides with the foreground color blue and is
SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
and optimizes the output in favor of colors.
- <STRONG>Miscellaneous</STRONG>
+
+</PRE><H3><a name="h3-Miscellaneous">Miscellaneous</a></H3><PRE>
If the terminal requires other than a null (zero) charac-
ter as a pad, then this can be given as pad. Only the
first character of the pad string is used. If the termi-
parameterized string <STRONG>rep</STRONG>. The first parameter is the
character to be repeated and the second is the number of
times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
- the same as `xxxxxxxxxx'.
+ the same as "xxxxxxxxxx".
If the terminal has a settable command character, such as
the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
text, including <STRONG>mc4</STRONG>, is transparently passed to the
printer while an <STRONG>mc5p</STRONG> is in effect.
- <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
- Hazeltine terminals, which do not allow `~' characters to
+
+</PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
+ Hazeltine terminals, which do not allow "~" characters to
be displayed should indicate <STRONG>hz</STRONG>.
Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
Teleray terminals, where tabs turn all characters moved
over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
Note: the variable indicating this is now
- `dest_tabs_magic_smso'; in older versions, it was tel-
+ "dest_tabs_magic_smso"; in older versions, it was tel-
eray_glitch. This glitch is also taken to mean that it is
not possible to position the cursor on top of a "magic
cookie", that to erase standout mode it is instead neces-
ing that the f1 key is used for escape and f2 for control
C. (Only certain Superbees have this problem, depending
on the ROM.) Note that in older terminfo versions, this
- capability was called `beehive_glitch'; it is now
- `no_esc_ctl_c'.
+ capability was called "beehive_glitch"; it is now
+ "no_esc_ctl_c".
Other specific terminal problems may be corrected by
adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
- <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
+
+</PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
If there are two very similar terminals, one (the variant)
can be defined as being just like the other (the base)
with certain exceptions. In the definition of the vari-
labels when in visual mode. This is useful for different
modes for a terminal, or for different user preferences.
- <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
+
+</PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
Long terminfo entries are unlikely to be a problem; to
date, no entry has even approached terminfo's 4096-byte
string-table maximum. Unfortunately, the termcap transla-
termcap translations of long terminfo entries can cause
problems.
- The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
+ The man pages for 4.3BSD and older versions of <STRONG>tgetent</STRONG>
instruct the user to allocate a 1024-byte buffer for the
termcap entry. The entry gets null-terminated by the
termcap library, so that makes the maximum safe length for
a termcap entry 1k-1 (1023) bytes. Depending on what the
application and the termcap library being used does, and
- where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
+ where in the termcap file the terminal type that <STRONG>tgetent</STRONG>
is searching for is, several bad things can happen.
Some termcap libraries print a warning message or exit if
one, because it affects more than just users of that par-
ticular terminal. This is the length of the entry as it
exists in /etc/termcap, minus the backslash-newline pairs,
- which <STRONG>tgetent()</STRONG> strips out while reading it. Some termcap
+ which <STRONG>tgetent</STRONG> strips out while reading it. Some termcap
libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
matter what its length, to see if it is the entry it
wants,
- <STRONG>o</STRONG> and <STRONG>tgetent()</STRONG> is searching for a terminal type that
+ <STRONG>o</STRONG> and <STRONG>tgetent</STRONG> is searching for a terminal type that
either is the long entry, appears in the termcap file
after the long entry, or does not appear in the file
- at all (so that <STRONG>tgetent()</STRONG> has to search the whole
- termcap file).
-
- Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
- and probably core dump the program. Programs like telnet
- are particularly vulnerable; modern telnets pass along
- values like the terminal type automatically. The results
- are almost as undesirable with a termcap library, like
- SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
- when it reads an overly long termcap entry. If a termcap
- library truncates long entries, like OSF/1 3.0, it is
- immune to dying here but will return incorrect data for
- the terminal.
+ at all (so that <STRONG>tgetent</STRONG> has to search the whole term-
+ cap file).
+
+ Then <STRONG>tgetent</STRONG> will overwrite memory, perhaps its stack, and
+ probably core dump the program. Programs like telnet are
+ particularly vulnerable; modern telnets pass along values
+ like the terminal type automatically. The results are
+ almost as undesirable with a termcap library, like SunOS
+ 4.1.3 and Ultrix 4.4, that prints warning messages when it
+ reads an overly long termcap entry. If a termcap library
+ truncates long entries, like OSF/1 3.0, it is immune to
+ dying here but will return incorrect data for the termi-
+ nal.
The "after tc expansion" length will have a similar effect
to the above, but only for people who actually set TERM to
- that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
- sion once it is found the terminal type it was looking
- for, not while searching.
+ that terminal type, since <STRONG>tgetent</STRONG> only does "tc" expansion
+ once it is found the terminal type it was looking for, not
+ while searching.
In summary, a termcap entry that is longer than 1023 bytes
can cause, on various combinations of termcap libraries
(check) option also checks resolved (after tc expansion)
lengths.
- <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
+
+</PRE><H3><a name="h3-Binary-Compatibility">Binary Compatibility</a></H3><PRE>
It is not wise to count on portability of binary terminfo
entries between commercial UNIX versions. The problem is
that there are at least two versions of terminfo (under
and XSI Curses extensions.
-</PRE>
-<H2>EXTENSIONS</H2><PRE>
+</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
TERMINFO_DIRS is not supported by older implementations.
and emulators like xterm that can return mouse-tracking
information in the keyboard-input stream.
+ X/Open Curses does not mention italics. Portable applica-
+ tions must assume that numeric capabilities are signed
+ 16-bit values. This includes the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv)
+ capability. The 32768 mask value used for italics with
+ ncv can be confused with an absent or cancelled ncv. If
+ italics should work with colors, then the ncv value must
+ be specified, even if it is zero.
+
Different commercial ports of terminfo and curses support
different subsets of the XSI Curses standard and (in some
cases) different extension sets. Here is a summary, accu-
<STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
-</PRE>
-<H2>FILES</H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/usr/share/terminfo/?/* files containing terminal
descriptions
-</PRE>
-<H2>SEE ALSO</H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
- <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>,
+ <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>. <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
-</PRE>
-<H2>AUTHORS</H2><PRE>
+</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
</PRE>
-<HR>
-<ADDRESS>
-Man(1) output converted with
-<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
-</ADDRESS>
+<div class="nav">
+<ul>
+<li><a href="#h2-NAME">NAME</a></li>
+<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-Predefined-Capabilities">Predefined Capabilities</a></li>
+<li><a href="#h3-User-Defined-Capabilities">User-Defined Capabilities</a></li>
+<li><a href="#h3-A-Sample-Entry">A Sample Entry</a></li>
+<li><a href="#h3-Types-of-Capabilities">Types of Capabilities</a></li>
+<li><a href="#h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></li>
+<li><a href="#h3-Preparing-Descriptions">Preparing Descriptions</a></li>
+<li><a href="#h3-Basic-Capabilities">Basic Capabilities</a></li>
+<li><a href="#h3-Parameterized-Strings">Parameterized Strings</a></li>
+<li><a href="#h3-Cursor-Motions">Cursor Motions</a></li>
+<li><a href="#h3-Area-Clears">Area Clears</a></li>
+<li><a href="#h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></li>
+<li><a href="#h3-Insert_Delete-Character">Insert/Delete Character</a></li>
+<li><a href="#h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></li>
+<li><a href="#h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></li>
+<li><a href="#h3-Tabs-and-Initialization">Tabs and Initialization</a></li>
+<li><a href="#h3-Delays-and-Padding">Delays and Padding</a></li>
+<li><a href="#h3-Status-Lines">Status Lines</a></li>
+<li><a href="#h3-Line-Graphics">Line Graphics</a></li>
+<li><a href="#h3-Color-Handling">Color Handling</a></li>
+<li><a href="#h3-Miscellaneous">Miscellaneous</a></li>
+<li><a href="#h3-Glitches-and-Braindamage">Glitches and Braindamage</a></li>
+<li><a href="#h3-Similar-Terminals">Similar Terminals</a></li>
+<li><a href="#h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></li>
+<li><a href="#h3-Binary-Compatibility">Binary Compatibility</a></li>
+</ul>
+</li>
+<li><a href="#h2-EXTENSIONS">EXTENSIONS</a></li>
+<li><a href="#h2-FILES">FILES</a></li>
+<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
+<li><a href="#h2-AUTHORS">AUTHORS</a></li>
+</ul>
+</div>
</BODY>
</HTML>