# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.997 $
-# $Date: 2022/03/26 21:59:51 $
+# $Revision: 1.1032 $
+# $Date: 2022/08/27 18:44:46 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
it#8, use=ansi+tabs,
ansi+erase|ANSI clear screen/line,
clear=\E[H\E[J, ed=\E[J, el=\E[K,
-ansi+rca|ANSI relative cursor-addressing,
+ansi+rca|ANSI relative cursor-addressing (1-based),
hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
ansi+rca2|ANSI relative cursor-addressing,
hpa=\E[%i%p1%dG, vpa=\E[%i%p1%dd,
dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
ansi+idc|ANSI insert/delete characters,
dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
-ansi+arrows|ANSI normal-mode cursor-keys,
+ansi+arrows|ANSI normal-mode home and cursor-keys,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H,
ansi+sgr|ANSI graphic renditions,
use=klone+acs,
# Most Intel boxes do not treat "invis" (invisible) text.
-klone+sgr8|attribute control for ansi.sys displays,
+klone+sgr8|attribute control for ansi.sys displays with invis,
invis=\E[8m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=ansi+erase,
# ansi-mtabs adds relative addressing and minimal tab support
-ansi-mtabs|any ANSI terminal with pessimistic assumptions,
+ansi-mtabs|any ANSI terminal with pessimistic assumptions (relative addressing),
it#8,
ht=^I, use=ansi-mini, use=ansi+local1,
s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
+# ECMA-48 addresses three of the four capabilities here:
+#
+# u6 -
+# 8.3.14 CPR - ACTIVE POSITION REPORT
+# Notation: (Pn1;Pn2) Representation: CSI Pn1;Pn2 05/02
+# Parameter default values: Pn1 = 1; Pn2 = 1
+#
+# u7
+# 8.3.35 DSR - DEVICE ST A TUS REPORT
+# Notation: (Ps) Representation: CSI Ps 06/14
+# Parameter default value: Ps = 0
+# DSR is used either to report the status of the sending device or to
+# request a status report from the receiving device, depending on the
+# parameter values:
+# 6 a report of the active presentation position or of the active data
+# position in the form of ACTIVE POSITION REPORT (CPR) is requested
+#
+# u9 -
+# 8.3.24 DA - DEVICE ATTRIBUTES
+# Notation: (Ps) Representation: CSI Ps 06/03
+# Parameter default value: Ps = 0
+# With a parameter value not equal to 0, DA is used to identify the
+# device which sends the DA. The parameter value is a device type
+# identification code according to a register which is to be established.
+# If the parameter value is 0, DA is used to request an identifying DA
+# from a device.
+#
+# DEC (and most "ANSI") terminals reply with a private-mode ("?") sequence,
+# but that register "which is to be" in ECMA-48 was never established.
+# For terminals that support DA1, a more specific u8 capability is preferred,
+# except for those (such as xterm) which can be configured to return different
+# responses.
+ansi+cpr|ncurses extension for ANSI CPR,
+ u6=\E[%i%d;%dR, u7=\E[6n,
ansi+enq|ncurses extension for ANSI ENQ,
- u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
- u9=\E[c,
+ u8=\E[?%[;0123456789]c, u9=\E[c, use=ansi+cpr,
+# DEC terminals provided DECID, subsumed into DA1:
+decid+cpr|ncurses extension for DECID,
+ u8=\E[?%[;0123456789]c, u9=\EZ, use=ansi+cpr,
# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
- rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
- u7=\E[6n, use=klone+color, use=klone+sgr8,
+ rmam=\E[?7l, sc=\E[s, smam=\E[?7h, use=ansi+cpr,
+ use=klone+color, use=klone+sgr8,
# Keypad: Home=\0G Up=\0H PrPag=\0I
# ka1,kh kcuu1 kpp,ka3
#### Linux consoles
#
+# release 1.2.13: 1995/03
+#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
-linux-basic|Linux console,
+linux-basic|Linux console (basic),
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18, U8#1,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
use=klone+sgr, use=ecma+color, use=linux+sfkeys,
linux+decid|ncurses extension for Linux console DECID,
- u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
+ u8=\E[?6c, use=decid+cpr,
linux+sfkeys|shifted function-keys for Linux console,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
colors@, pairs@,
setab@, setaf@, setb@, setf@, use=linux,
+# release 1.3: 1995/06
+#
# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>. The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
%d%;,
oc=\E]R, use=linux-basic,
+# release 2.2: 1999/01
+#
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+# release 2.6: 2003/12 - 2004/12
+#
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
# http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
# Although the kernel has mappings for these, they were not in the default
rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
smpch@, use=linux,
+# release: 0.3.9b 1997/01 to 2000/05
+#
# This is based on the Linux console (relies on the console to perform some
# of the functionality), but does not recognize as many control sequences.
# The program comes bundled with an old (circa 1998) copy of the Linux
# \E[y,xf same as \E[y,xH
#
# Note: The status-line support is buggy (dsl does not work).
-kon|kon2|jfbterm|Kanji ON Linux console,
- ccc@, hs,
- civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
- initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
- use=linux,
+kon|kon2|Kanji ON Linux console,
+ am, bce, ccc, eo, eslok, hs, mir, msgr, xenl, xon,
+ colors#8, it#8, ncv#18, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, dsl=\E[?H\E[?E, ed=\E[J, el=\E[K, el1=\E[1K,
+ fsl=\E[?F, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ initc=\E]P%p1%x%p2%02x%p3%02x%p4%02x, invis=\E[8m,
+ kb2=\E[G, kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[37;40m,
+ rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
+ rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[?T, u8=\E[?6c,
+ vpa=\E[%i%p1%dd, use=ansi+enq,
+
+# release: 0.4.7 2005/05
+#
+jfbterm|japanese framebuffer terminal,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ sgr0=\E[0m, use=kon,
# FbTerm
# Another variant. There are two parts (src, src/lib) with the latter
# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach console,
- am, km,
+ am, km, NQ,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2%;%?%p6%t;1%;%?%p7%t;8%;m,
use=ecma+index, use=mach,
-mach-gnu-color|Mach console with ANSI color,
+mach-gnu-color|GNU Mach console with ANSI color,
colors#8, pairs#64,
op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, use=mach-gnu,
#
# Reading the source, RIS resets cnorm, but not xmous.
hurd|The GNU Hurd console server,
- am, bce, bw, eo, km, mir, msgr, xenl, xon,
+ am, bce, bw, eo, km, mir, msgr, xenl, xon, NQ,
colors#8, it#8, ncv#18, pairs#64,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
yzz{{||}}~~,
%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
- tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
- use=att610+cvis0, use=ecma+index,
+ tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=decid+cpr,
+ use=ansi+rep, use=att610+cvis0, use=ecma+index,
#
qansi|QNX ANSI with console writes,
daisy, xhpa, use=qansi-g,
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
scoansi-old|SCO Extended ANSI standard crt (5.0.5),
- OTbs, am, bce, eo, xon,
+ OTbs, am, bce, eo, xon, NQ,
colors#8, cols#80, it#8, lines#25, pairs#64,
acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN
OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3
el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, nel=\EE, rc=\E8, ri=\EM,
rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, sc=\E7, smam=\E[?7h,
- smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ smul=\E[4m, tbc=\E[3g, use=ansi+cpr,
pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
pccon0|OpenBSD PC console with simple ASCII pseudographics,
rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=ecma+index, use=vt220+cvis,
+ use=decid+cpr, use=ecma+index, use=vt220+cvis,
# NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
vpa=\E[%i%p1%dd, use=ecma+index,
#### FreeBSD console entries
+
+# Originally from termcap:
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
-#
+# syscons, sc - the console driver
+#
# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
-# The emulator sends difference strings based on shift- and control-keys,
+# The emulator sends different strings based on shift- and control-keys,
# like scoansi:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
+# vt - virtual terminal console driver
+#
# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
# which is intended to be xterm-compatible. See for example
# http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
# in particular scterm-teken.c
#
+# Some of the documentation refers to this as "vt"; its proper name is "teken".
+#
+# The sc(4) manual page states that it is possible to switch between the two
+# by editing /boot/loader.conf, adding
+# kern.vty=sc
+# Doing that does not change the default TERM variable. That is hard-coded in
+# /etc/ttys, rather than deriving it from the kernel state.
+#
# For FreeBSD 12 and 13:
# ---------------------
# In newer releases, it is no longer possible to boot into a configuration that
-# works with syscons. teken's "cons25" configuration supports only the first
-# 12 function keys. One may switch at runtime between the two flavors of
-# function keys using vidcontrol:
+# works with syscons. According to efi(4),
+# "The vt(4) system console is automatically selected when booting via UEFI."
+# See FreeBSD #264226.
+#
+# FreeBSD 13 supports 64-bit machines which boot with UEFI:
+# https://www.freebsd.org/platforms/
+# The i386 platform does not use UEFI (and modifying the loader configuration
+# does load sysconf); however because no updates (fixes) are available, most
+# developers will regard that as unsupported.
+#
+# With FreeBSD 13, even when syscons is loaded (e.g., with the i386 platform),
+# its function-keys are not configured. Using
+# vidcontrol -T cons25
+# repairs this.
+#
+# When teken is loaded, vidcontrol can switch at runtime between the
+# teken/cons25 function keys:
# vidcontrol -T cons25
# vidcontrol -T xterm
-# But for each, teken implements only about a quarter of the imitated terminal's
-# terminal descriptions.
+# However due to a limitation in the implementation, only the first 12 function
+# keys are available. The real syscons supports 48 function keys (using the
+# shift and control modifiers), while xterm supports more than twice as many.
+#
+# vidcontrol does not change the emulation. As a result, the quarter (17/73) of
+# non-function key capabilities which differ between syscons and teken are
+# unsupported in the UEFI-based configurations.
#
# tack:
# VT100 line-drawing does not work (UTF-8 equivalents do).
# Those are removed from this entry's acsc string to avoid confusion.
# The resulting description provides correct line-drawing and function-keys -TD
teken-2018|teken as of 2018,
- bw@, mir, xenl,
+ bw@, mir, xenl, NQ,
acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
\304t\303u\264v\301w\302x\263y\363z\362~\371,
cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
- u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
teken-2022|teken as of 2022,
- am, bce, eo, mir, msgr, npc,
+ am, bce, eo, mir, msgr, npc, NQ,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, U8#1,
bold=\E[1m, cr=\r, cub1=^H, dim=\E[30;1m, ech=\E[%p1%dX,
ind=\E[S, kbs=^H, kent=\r, nel=\E[E, op=\E[x, rev=\E[7m,
# support:
vt100+keypad|DEC VT100 numeric keypad no fkeys,
ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
-vt100+pfkeys|DEC VT100 numeric keypad,
+vt100+pfkeys|DEC VT100 numeric keypad (kf1-kf4),
kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=vt100+keypad,
-vt100+fnkeys|DEC VT100 numeric keypad,
+vt100+fnkeys|DEC VT100 numeric keypad (kf0-kf10),
kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
kf9=\EOw, use=vt100+pfkeys,
#
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;$<2>,
smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
- use=vt100+4bsd, use=vt100+fnkeys,
+ use=decid+cpr, use=vt100+4bsd, use=vt100+fnkeys,
vt100+4bsd|DEC VT100 from 4.0BSD,
am, msgr,
cols#80, it#8, lines#24,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[H, knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8,
- rmir=\E[4l, smcup=\E7\E[?47h, smir=\E[4h,
+ khome=\E[H, knp=\E[6~, kpp=\E[5~, rmir=\E[4l, smir=\E[4h,
vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C,
- use=nsterm-c-s-acs, use=vt220+cvis,
+ use=xterm+alt47, use=nsterm-c-s-acs, use=vt220+cvis,
# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
# the background color erase feature. The newer version 240.2 in Mac OS X
rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
use=ecma+italics, use=nsterm-build361,
+nsterm-build440|Terminal.app in MacOS 11.6.8,
+ use=xterm+alt1049, use=nsterm-build400,
+
# This is an alias which should always point to the "current" version
nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
- use=nsterm-build400,
+ use=nsterm-build440,
#### iTerm, iTerm2
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
- rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmso=\E[m, rmul=\E[m,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
- use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
- use=xterm+x11mouse, use=xterm+256setaf, use=vt220+cvis,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
+ use=xterm+alt47, use=ansi+enq, use=xterm+sl-twm,
+ use=vt100+keypad, use=xterm+x11mouse,
+ use=xterm+256setaf, use=vt220+cvis,
# iTerm2 3.0.15
#
# The '+' entries are building blocks
xnuppc+basic|Darwin PowerPC console basic capabilities,
- am, bce, mir, xenl,
+ am, bce, mir, xenl, NQ,
it#8,
bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kind=\E[B, kri=\E[A, kspd=^Z, nel=\r\n, oc=\E]R,
op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmpch=\E[10m,
+ rmso=\E[27m, rmul=\E[24m,
rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
- smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
- smul=\E[4m, vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
+ vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit,
use=ansi+tabs, use=ansi+rep, use=ecma+index,
- use=xterm+sm+1006, use=putty+fnkeys, use=vt102+enq,
- use=xterm+sl, use=vt100+fnkeys, use=putty+keypad,
- use=vt220+cvis,
+ use=xterm+alt1049, use=xterm+sm+1006, use=putty+fnkeys,
+ use=vt102+enq, use=xterm+sl, use=vt100+fnkeys,
+ use=putty+keypad, use=vt220+cvis,
putty+keypad|PuTTY numeric keypad,
kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
-teraterm2.3|Tera Term Pro,
+teraterm2.3|Tera Term Pro 2.3,
km,
ncv#43, vt@,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
# - it recognizes the dtterm window controls for reporting size in
# characters and pixels.
# - it passes SIGWINCH.
-teraterm4.59|Tera Term Pro,
+teraterm4.59|Tera Term Pro 4.59,
bce, xenl@,
ncv#41,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# + recognizes xterm's original direct-colors sequences, but result is
# poor.
# + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
-teraterm4.97|Tera Term Pro,
+teraterm4.97|Tera Term Pro 4.97,
XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
teraterm-256color|TeraTerm with xterm 256-colors,
use=xterm+256setaf, use=teraterm,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em,
- rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
- sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=xterm+alt47,
use=vt220+vtedit, use=xterm+kbs, use=vt100+enq,
xterm-old|antique xterm version,
use=xterm-r6,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
- ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
- rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
- sc=\E7,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[27m, rmul=\E[24m, rs1=^O,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
- use=ecma+color, use=vt220+cvis, use=vt220+keypad,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=xterm+alt47, use=xterm+kbs,
+ use=vt100+enq, use=ecma+color, use=vt220+cvis,
+ use=vt220+keypad,
# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
# codes for F1-F4 except while in VT220 mode.
civis=\E[?25l, cnorm=\E[?25h,
vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility,
civis=\233?25l, cnorm=\233?25h,
-# The cvvis capability was unused in the SVr4 terminal descriptions for the
-# AT&T terminals, and there are no available documents as of 2021 which can
-# provide that it would have worked. The first block is used for those 1980s
-# terminals; the second is used for terminals whose behavior can be verified.
+# The first block is for terminals which did not support blinking cursor.
att610+cvis0|AT&T 610 cursor-visibility,
- civis=\E[?25l, cnorm=\E[?25h\E[?12l,
-att610+cvis|xterm cursor-visibility in XFree86 4.4,
+ civis=\E[?25l, cnorm=\E[?12l\E[?25h,
+att610+cvis|AT&T 610 cursor-visibility with blink,
civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
# This version was released in XFree86 4.4.
use=ansi+rep, use=ecma+strikeout, use=xterm+pcfkeys,
use=xterm+nofkeys,
+xterm-p371|xterm patch #371,
+ use=dec+sl, use=xterm-p370,
+
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator,
- use=dec+sl, use=xterm-p370,
+ use=xterm-p370,
# This fragment is for people who cannot agree on what the backspace key
# should send.
# ---------------------------------
# The meta key may also be used as a modifier in this scheme, adding another
# bit to the parameter.
-xterm+pcfkeys|fragment for PC-style fkeys,
+xterm+pcfkeys|xterm fragment for PC-style fkeys,
use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
use=xterm+pce2,
kf8=\E[19~, kf9=\E[20~,
#
# Chunks from xterm #230:
-xterm+pce2|fragment with modifyCursorKeys:2,
+xterm+pce2|fragment with modifyCursorKeys:2 editing-keys,
kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
xterm+noalt|xterm without altscreen,
rmcup@, smcup@,
+xterm+alt47|X11R4 alternate-screen,
+ rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h,
+
xterm+alt1049|xterm 90 feature,
rmcup=\E[?1049l, smcup=\E[?1049h,
# is of interest only to the numerically illiterate), is compatible with other
# terminal descriptions written for curses. It relies upon the extended range
# for numeric capabilities provided in ncurses 6.1:
-xterm+direct2|xterm with direct-color indexing,
+xterm+direct2|xterm with direct-color indexing (old building-block),
RGB,
colors#0x1000000, pairs#0x10000, CO#8,
initc@, op=\E[39;49m,
# That in turn had a problem: in the original patch submitted for KDE konsole
# in 2006, the submitter and the developer alike overlooked a "color space
# identifier" parameter. This version provides for that parameter:
-xterm+direct|xterm with direct-color indexing,
+xterm+direct|xterm with direct-color indexing (building-block),
RGB,
colors#0x1000000, pairs#0x10000, CO#8,
initc@, op=\E[39;49m,
# that xterm's original implementation should have used colons for the
# subparameter separators, but chose not to correct this in konsole. As of
# late 2017, konsole still accepts only the nonstandard semicolon delimiters.
-xterm+indirect|xterm with direct-color indexing (old),
+xterm+indirect|xterm with direct-color indexing (old legacy building-block),
RGB,
colors#0x1000000, pairs#0x10000,
initc@, op=\E[39;49m,
# palette, though the intrusion of indexed colors on the direct-color space
# would be more noticeable.
-xterm+direct16|xterm with direct-color indexing,
+xterm+direct16|xterm with direct-color indexing (16-color building-block),
CO#16,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48
:2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&
xterm-direct16|xterm with direct-colors and 16 indexed colors,
use=xterm+direct16, use=xterm,
-xterm+direct256|xterm with direct-color indexing,
+xterm+direct256|xterm with direct-color indexing (256-color building-block),
CO#0x100,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
%p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1
# Se resets the cursor style to the terminal power-on default.
#
# Cs and Cr set and reset the cursor colour.
-xterm+tmux|advanced xterm features used in tmux,
+xterm+tmux|advanced xterm features used in tmux (cursor style 2),
Cr=\E]112\007, Cs=\E]12;%p1%s\007,
Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
xterm+tmux2|advanced xterm features used in tmux,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
- u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
- vpa=\233%i%p1%dd, use=xterm+kbs,
+ u8=\233[?%[;0123456789]c, vpa=\233%i%p1%dd,
+ use=ansi+enq, use=xterm+kbs,
# Note: normally xterm supports modified function-keys as described in
# XTerm - "Other" modified keys
rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
use=xterm,
-xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
+xterm-24|vs100|xterms|xterm terminal emulator 24-line (X Window System),
lines#24, use=xterm-old,
# This is xterm for ncurses.
#
dec+sl|DEC VTxx status line,
eslok, hs,
- dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
+ dsl=\E[0$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
#
# The following xterm variants don't depend on your base version
# xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
# "any-event" mouse mode.
-xterm+sm+1002|xterm any-event mouse,
- kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
-xterm-1002|xterm any-event mouse,
- use=xterm+sm+1002, use=xterm,
+#
+# These building blocks incorporate later features as well:
+# xterm patch #224 (2007/2/11 added private mode 1004, for enabling/disabling
+# focus in/out event reporting.
+# xterm patch #277 (2012/01/07 added private mode 1006
-xterm+sm+1003|testing xterm-mouse,
- kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
+xterm+sm+1002|xterm any-button mouse,
+ kmous=\E[<, XM=\E[?1006;1004;1002%?%p1%{1}%=%th%el%;,
+ xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
+ use=xterm+focus,
+xterm-1002|example of xterm any-button mouse,
+ use=xterm+sm+1002, use=xterm,
-xterm-1003|testing xterm-mouse,
+xterm+sm+1003|xterm any-event mouse,
+ XM=\E[?1006;1004;1003%?%p1%{1}%=%th%el%;,
+ use=xterm+sm+1002,
+xterm-1003|example of xterm any-event mouse,
use=xterm+sm+1003, use=xterm,
+xterm+focus|xterm focus-in/out event "keys",
+ kxIN=\E[I, kxOUT=\E[O,
+
# xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
# locator mode.
# where the coordinates in the mouse response would be encoded in UTF-8,
# thereby extending the range of coordinates past 222=(255-33). This is the
# "1005" mouse mode.
-xterm+sm+1005|xterm UTF-8 mouse,
+xterm+sm+1005|xterm UTF-8 mouse (building block),
kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
xterm-1005|xterm UTF-8 mouse,
# As an alternative (and fixing the longstanding limitation of X11 mouse
# protocol regarding button-releases), I provided the 1006 mode, referring
# to it as "SGR 1006" since the replies resemble the SGR control string:
-xterm+sm+1006|xterm SGR-mouse,
+xterm+sm+1006|xterm SGR-mouse (building block),
kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
xterm-1006|xterm SGR-mouse,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
- smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
+ smso=\E[7m, tbc=\E[3g, use=decid+cpr, use=vt100+fnkeys,
xtermc|xterm terminal emulator (color),
colors#8, ncv#7, pairs#64,
smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
# This describes the capabilities of color_xterm, an xterm variant from
-# before ECMA-64 color support was folded into the main-line xterm release.
+# before ECMA-48 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
# The README's with the distribution also say that it supports SGR 21, 24, 25
%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, use=ecma+color, use=vt220+keypad,
+ smul=\E[4m, use=decid+cpr, use=ecma+color,
+ use=vt220+keypad,
# The IRAF source has a terminfo using "xterm-r5", but line-drawing does not
# work in that case. This entry uses xterm+acs, to work around that problem.
# vt100 TBC (tab reset) is not implemented.
# xterm alternate screen controls do not restore cursor position properly
# it hangs in tack after running function-keys test.
-gnome-rh72|GNOME Terminal,
+gnome-rh72|GNOME Terminal in RedHat 7,
bce, km@,
kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
rmam=\E[?7l,
# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
# operations. Shift-tab generates a distinct sequence so it can be argued
# that it implements kcbt.
-gnome-rh80|GNOME Terminal,
+gnome-rh80|GNOME Terminal in RedHat 8,
bce@, msgr@,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
# GNOME Terminal 2.2.1 (Redhat 9.0)
#
# bce and msgr are repaired.
-gnome-rh90|GNOME Terminal,
+gnome-rh90|GNOME Terminal in RedHat 9,
bce, msgr, XT,
hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
# GNOME Terminal 2.14.2 (Fedora Core 5)
# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
-gnome-fc5|GNOME Terminal,
+gnome-fc5|GNOME Terminal in Fedora Core 5,
rs1=\Ec,
rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
\E[?25h,
#
# The parameters with \EO (SS3) are technically an error, since SS3 should have
# no parameters. This appears to be rote copying based on xterm+pcc0.
-vte+pcfkeys|VTE's variation on xterm+pcfkeys,
+vte+pcfkeys|VTE's variation on xterm+pcfkeys (building block),
kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
use=xterm+pcfkeys,
-gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
+gnome+pcfkeys|GHOME Terminal's variation on xterm+pcfkeys (building block),
use=vte+pcfkeys,
# deprecated - use "vte" for newer versions
#
# Re-enable "bel", since it is latent in the source-code even though KDE config
# often hides the feature (2020/5/30)
-konsole-base|KDE console window,
+konsole-base|KDE console window (base),
bce, km@, npc, XT,
ncv@,
blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX,
# mlterm 3.x made further changes, but they were not reflected in the included
# mlterm.ti (which was dropped in 2015). This entry has been based on testing
# with ncurses, tack and vttest -TD
-mlterm3|multi lingual terminal emulator,
+mlterm3|multi lingual terminal emulator 3.x,
bce, AX,
blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
#
-mlterm2|multi lingual terminal emulator,
+mlterm2|multi lingual terminal emulator 2.x,
am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
- vpa=\E[%i%p1%dd, use=vt220+vtedit, use=xterm+alt1049,
- use=ecma+index, use=mlterm+pcfkeys, use=vt220+cvis,
- use=xterm+r6f2,
+ u8=\E[?1;2c, vpa=\E[%i%p1%dd, use=ansi+enq,
+ use=vt220+vtedit, use=xterm+alt1049, use=ecma+index,
+ use=mlterm+pcfkeys, use=vt220+cvis, use=xterm+r6f2,
# The insert/delete/home/end keys do not respond to modifiers because mlterm
# looks in its termcap to decide which string to send. If it used terminfo
# (when available), it could use the extended names introduced for xterm.
-mlterm+pcfkeys|fragment for PC-style fkeys,
+mlterm+pcfkeys|mlterm fragment for PC-style fkeys,
kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
ind=\n, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
- rmul=\E[24m,
+ rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
25h,
s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
- smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
+ sgr0=\E[0m\017, smacs=^N, smir=\E[4h, smkx=\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+enq,
use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
# Key Codes from rxvt reference:
#
#
# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
-rxvt+pcfkeys|fragment for PC-style fkeys,
+rxvt+pcfkeys|rxvt fragment for PC-style fkeys,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
# Olesen (or possibly Davis) diverged in one respect from Linux's bce color
# behavior: inserting/deleting characters does not fill the newly empty cell
# with the default background color.
-rxvt|rxvt terminal emulator (X Window System),
+rxvt|rxvt-color|rxvt terminal emulator (X Window System),
ncv@,
hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
-rxvt-color|rxvt terminal emulator (X Window System),
- use=rxvt,
rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
use=xterm+256color, use=rxvt,
rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
use=xterm+88color, use=rxvt,
-rxvt-xpm|rxvt terminal emulator (X Window System),
+rxvt-xpm|rxvt terminal emulator (X Window System with xpm),
use=rxvt,
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
- rmso=\E[27m, rmul=\E[24m,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=, rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
25h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
- smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+ use=xterm+alt47, use=vt100+enq, use=rxvt+pcfkeys,
use=ecma+color, use=vt220+cvis,
Eterm-256color|Eterm with xterm 256-colors,
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
-hpterm|X-hpterm|HP X11 terminal emulator,
+hpterm|X-hpterm|HP X11 terminal emulator (old),
am, da, db, mir, xhp, xon,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
#
# This version, which came from Martin Trusler, was tested with lynx using
# ncurses 5.4
-hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color,
+hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color (new),
OTbs, am, ccc, da, db, km, mir, xhp,
colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
pairs#8, xmc#0,
ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu,
kf7=\EOv, kf8=\EOl, kf9=\EOw, op=\E[100m, rc=\E8, rev=\E[7m,
- ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>,
- rmso=\E[m, rmul=\E[m,
+ ri=\EM, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=vt100+fnkeys, use=x10term+sl,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+fnkeys,
+ use=x10term+sl,
#### MTERM
#
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
- u7=\E[6n, vpa=\E[%i%p1%dd, use=vt220+vtedit,
- use=ecma+index, use=vt220+cvis,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+ use=ansi+cpr, use=vt220+vtedit, use=ecma+index,
+ use=vt220+cvis,
#### VWM
# http://vwm.sourceforge.net/
# VWM 2.0.2 (2009-05-01)
# vwmterm is a terminal emulator written for the VWM console window manager.
# This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
-vwmterm|(vwm term),
+vwmterm|VWM terminal,
am, bce, ccc, mir, msgr, npc, xenl, xon,
colors#8, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
- u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
- Ss=\E[%p1%d q, use=vt220+pcedit, use=ecma+index,
- use=xterm+alt1049, use=vt220+cvis, use=xterm+sl,
- use=ecma+italics, use=ecma+strikeout,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, u8=\E[?1;2c,
+ vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=ansi+enq,
+ use=vt220+pcedit, use=ecma+index, use=xterm+alt1049,
+ use=vt220+cvis, use=xterm+sl, use=ecma+italics,
+ use=ecma+strikeout,
#
# st-0.1.1
#
%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E]2;, vpa=\E[%i%p1%dd,
- use=vt220+pcedit, use=ecma+italics, use=ecma+index,
- use=xterm+256setaf, use=xterm+sl-twm,
+ use=ansi+enq, use=vt220+pcedit, use=ecma+italics,
+ use=ecma+index, use=xterm+256setaf, use=xterm+sl-twm,
use=xterm+alt1049, use=vt220+cvis,
#### TERMINOLOGY
# This description uses xterm+pcf0, which is misleading because the program
# does not handle combinations of modifiers - but listing them all would
# involve more effort than its developers spent -TD
-terminology-0.6.1|EFL-based terminal emulator,
+terminology-0.6.1|EFL-based terminal emulator (0.6.1),
mc5i@,
blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
- kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
- use=xterm+256setaf,
+ kRIT7=\E[1;7C, kUP=\E[1;2A, use=ansi+enq, use=xterm+pcf0,
+ use=vt100, use=xterm+256setaf,
-# 2017-11-11
+# 2017-11-11:
# Tested terminology 1.0.0
#
# tack -
#
# Aside from the partial fixes for function/cursor/editing keys, no improvement
# in other tests versus 0.6.1
-terminology-1.0.0|EFL-based terminal emulator,
+terminology-1.0.0|EFL-based terminal emulator (1.0.0),
dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
khome=\E[OH, rmacs=\E(B,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
# left/right margins do not work
# most of DECSCUSR works
# most problems with bce are fixed.
-terminology-1.8.1|EFL-based terminal emulator,
+terminology-1.8.1|EFL-based terminal emulator (1.8.1),
km@,
cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
use=ecma+index, use=xterm+256setaf, use=ansi+rep,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
- smul=\E[4m,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, use=xterm+alt47, use=ansi+cpr,
# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
- am, mir, msgr, xenl,
- colors#8, cols#80, lines#24, pairs#64,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
- setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
+ msgr,
+ colors#8, pairs#64,
+ blink=\E[5m, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
+ kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ op=\E[39;49m, rc=\E8, ri=\EM, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec, sc=\E7, setab=\E[%p1%'('%+%dm,
+ setaf=\E[%p1%{30}%+%dm,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
%p7%t;8%;m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- u6=\E[%i%d;%dR, u7=\E[6n, use=vt220+pcedit,
+ sgr0=\E[m, use=vt220+pcedit, use=eterm,
# shell.el can "do" color, though not nearly as well.
#
# since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
# the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
# terminfo entries (which list about 60% of the control sequences).
-screen|VT 100/ANSI X3.64 virtual terminal,
+screen|VT 100/ANSI X3.64 virtual terminal (base),
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen4,
-screen2|VT 100/ANSI X3.64 virtual terminal (old),
+screen2|VT 100/ANSI X3.64 virtual terminal (old 2.x),
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
smso=\E[3m, smul=\E[4m, tbc=\E[3g,
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
-screen3|VT 100/ANSI X3.64 virtual terminal (old),
+screen3|VT 100/ANSI X3.64 virtual terminal (old 3.x),
km, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
# screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
# was last updated in 2009 to include 256-color support. The most recent
# release is 4.6.2 (October 2017).
-screen4|VT 100/ANSI X3.64 virtual terminal,
+screen4|VT 100/ANSI X3.64 virtual terminal (4.x),
use=ecma+index, use=screen,
# As of March 2019, screen 5.0 has not been released.
kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, op=\E[39;49m,
- rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
- rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
25h,
setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+alt47,
use=vt220+vtedit, use=vt220+cvis, use=ecma+italics,
dvtm-256color|dynamic virtual terminal manager with 256 colors,
smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl,
use=ansi+enq,
-ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode,
+ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color),
use=ncsa-m, use=klone+color,
-ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode,
+ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line),
hs@,
dsl@, fsl@, tsl@, use=ncsa,
-ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode,
+ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line),
hs@,
dsl@, fsl@, tsl@, use=ncsa-m,
# alternate -TD:
# NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
-news-old-unk|Sony NEWS VT100 emulator common entry,
+news-old-unk|old Sony NEWS VT100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80, vt#3,
OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
-nwp512|news|nwp514|news40|vt100-bm|old Sony VT100 emulator 40 lines,
+nwp512|news|nwp514|news40|vt100-bm|nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|old Sony VT100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
use=news-old-unk,
#
# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
-nwp512-a|nwp514-a|news-a|news42|news40-a|Sony VT100 emulator 42 line,
+nwp512-a|nwp514-a|news-a|news42|news40-a|old Sony VT100 emulator 42 line,
lines#42,
is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
use=news-old-unk,
#
-# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
-nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|Sony VT100 emulator 40 lines,
- OTbs,
- lines#40,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
- r\E8,
- use=news-old-unk,
-#
# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
-nwp513|nwp518|nwe501|newscbm|news31|Sony VT100 emulator 33 lines,
+nwp513|nwp518|nwe501|newscbm|news31|nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 31 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
r\E8,
use=news-old-unk,
#
-# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
-nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 33 lines,
- OTbs,
- lines#31,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
- r\E8,
- use=news-old-unk,
-#
# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
-news28|Sony VT100 emulator 28 lines,
+news28|old Sony VT100 emulator 28 lines,
OTbs,
lines#28,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
use=news-old-unk,
#
# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
-news29|news28-a|Sony VT100 emulator 29 lines,
+news29|news28-a|old Sony VT100 emulator 29 lines,
lines#29,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
r\E8,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
- use=vt220+cvis, use=ecma+color,
+ smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=decid+cpr,
+ use=vt220+vtedit, use=vt220+cvis, use=ecma+color,
######## Non-Unix Consoles
#
kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kspd=^Z, nel=\r\n,
op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmpch=\E[10m,
- rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
%t;8%;%?%p9%t;11%;m,
- sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
- smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
- vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
+ sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m,
+ smso=\E[7m, smul=\E[4m, tsl=\E];, vpa=\E[%i%p1%dd,
+ use=xterm+alt47, use=vt220+pcedit, use=vt102+enq,
# I've supplied this so that you can help test new values and add other
# features. Cheers, earnie_boyd@yahoo.com.
rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
- use=vt220+cvis,
+ smul=\E[4m, tbc=\E[3g, use=ansi+cpr, use=vt220+cvis,
#### Microsoft (miscellaneous)
vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
# From: Martin Trusler
-hp98550-color|hp98550a-color|HP 9000 Series 300 color console,
+hp98550-color|hp98550a-color|HP 9000 Series 300 color console (Trusler),
OTbs, am, ccc, da, db, km, mir, xhp,
colors#8, cols#128, it#8, lh#2, lines#49, lm#0, lw#8, nlab#8,
pairs#8, xmc#0,
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- tsl=\EP2~, use=vt100+4bsd,
+ tsl=\EP2~, use=decid+cpr, use=vt100+4bsd,
#### Wyse (wy)
#
\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
- tbc=\E[3g, tsl=\E[>\,\001, use=vt220+cvis,
+ tbc=\E[3g, tsl=\E[>\,\001, use=decid+cpr, use=vt220+cvis,
use=vt220+keypad,
#
# This terminal description uses the non-hidden attribute mode
%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+vtedit,
- use=vt220+cvis, use=vt220+keypad,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr,
+ use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
#
# Wyse 85 with visual bell.
wy85-vb|wyse85-vb|Wyse 85 with visible bell,
%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+cvis,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr,
+ use=vt220+cvis,
#
# Wyse 185 emulating a VT320 7 bit mode.
#
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
- use=vt220+vtedit, use=vt220+keypad,
+ use=decid+cpr, use=vt220+vtedit, use=vt220+keypad,
#
# Wyse 185 with 24 data lines and top status (terminal status)
wy185-24|wyse185-24|Wyse 185 with 24 data lines,
tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
+ use=decid+cpr,
#
# Function key set for the ASCII (wy-50 compatible) keyboard
# This is the default 370.
sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
- vpa=\E[%i%p1%dd, use=vt220+vtedit, use=vt220+keypad,
+ vpa=\E[%i%p1%dd, use=decid+cpr, use=vt220+vtedit,
+ use=vt220+keypad,
#
# Wyse 520 with 24 data lines and status (terminal status)
wy520-24|wyse520-24|Wyse 520 with 24 data lines,
use=wy520-36,
#
# Wyse 520 in 132-column, 48 lines
-wy520-48w|wyse520-48w|Wyse 520 with 48 data lines,
+wy520-48w|wyse520-48w|Wyse 520 with 48 data lines (132 column),
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
use=wy520-epc,
#
# Wyse 520 in 132-column, 36 lines with EPC keyboard
-wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard,
+wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard (132 column),
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
use=wy520-36pc,
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
-wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard,
+wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard (132 column),
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
- smso=\E[7m,
+ smso=\E[7m, use=ansi+cpr,
att2350|AT&T 2350 Video Information Terminal 80 column mode,
mc0@, mc4@, mc5@, use=att2300,
%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ use=decid+cpr, use=vt100+fnkeys,
#
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+ use=decid+cpr,
att5420_2-w|AT&T 5420 model 2 in 132 column mode,
cols#132,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
- vpa=\E[%p1%{1}%+%dd,
+ vpa=\E[%p1%{1}%+%dd, use=decid+cpr,
att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
%|%t;7%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
+ smul=\E[4m, tbc=\E[3g, use=ansi+cpr,
# Terminfo entry for the AT&T 510 D Personal Terminal
# Function keys 9 through 16 are accessed by bringing up the
sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
- use=ansi+rep, use=ecma+index,
+ use=ansi+cpr, use=ansi+rep, use=ecma+index,
# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
att500|att513|AT&T 513 using page mode,
%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h,
smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+ use=decid+cpr, use=ansi+rep,
-# 01-07-88
+# 01-07-88:
# printer must be set to EMUL ANSI to accept ESC codes
# <cuu1> stops at top margin
# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx,
+ tsl=\E7\E[25;%i%p1%dx, use=ansi+cpr,
att605-pc|AT&T 605 in pc term mode,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
\263,
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
- use=ecma+index, use=att610+cvis0,
+ use=decid+cpr, use=ecma+index, use=att610+cvis,
att610-w|AT&T 610; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx, use=ecma+index,
- use=att610+cvis0,
+ tsl=\E7\E[25;%i%p1%dx, use=decid+cpr, use=ecma+index,
+ use=att610+cvis,
att620-w|AT&T 620; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
%;m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- use=ecma+index,
+ use=ansi+cpr, use=ecma+index,
att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
lines#24, use=att630,
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
- tsl=\E7\E[99;%i%p1%dx, use=ansi+rep, use=att610+cvis0,
+ tsl=\E7\E[99;%i%p1%dx, use=decid+cpr, use=ansi+rep,
+ use=att610+cvis0,
# This entry was modified 3/13/90 by JWE.
# fixes include additions of <enacs>, correcting <rep>, and modification
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
- swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=ansi+rep,
- use=att610+cvis0,
-att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=decid+cpr,
+ use=ansi+rep, use=att610+cvis,
+# "MGT" is "Multi-Tasking Graphics Terminal"
+att730-41|730MTG-41|AT&T 730-41 windowing terminal,
lines#41, use=att730,
-att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal,
lines#24, use=att730,
-att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+att730r|730MTGr|AT&T 730 rev video windowing terminal,
flash=\E[?5l$<200>\E[?5h,
is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
-att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal,
lines#41, use=att730r,
-att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal,
lines#24, use=att730r,
# The following represents the screen layout along with the associated
rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
+ use=ansi+cpr,
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 1.
att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
lines#24,
mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
-tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+att505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
lines#22, use=att505,
#
#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
- u8=\E[?6c, u9=\E[c, use=ecma+index,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u8=\E[?6c,
+ use=ansi+enq, use=ecma+index,
cit101e-n|CIT-101e w/o am,
am@,
cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
# and mc5= should use the \E[?4i and \E[?5i strings instead).
hds200|Human Designed Systems HDS200,
- am, bw, eslok, hs, km, mir, msgr, xenl, xon,
+ am, bw, eslok, hs, km, mir, msgr, xenl, xon, NQ,
cols#80, it#8, lines#24, lm#0,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
%?%p1%p3%|%t;7%;m,
- sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
- u7=\E[6n, u8=\E[5n, u9=\E[0n,
+ sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u8=\E[5n, u9=\E[0n,
+ use=ansi+cpr,
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ use=decid+cpr, use=vt100+fnkeys,
ts100-ctxt|Falco ts-100 saving context,
rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy <nl> string.
-superbee-xsb|Beehive SuperBee,
+superbee-xsb|Beehive SuperBee (improved),
am, da, db, xsb,
cols#80, it#8, lines#25,
clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
# This version works with the escape switch off
# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
-hz1520-noesc|Hazeltine 1520,
+hz1520-noesc|Hazeltine 1520 (no escape),
am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
2%;m,
sgr0=\E[0;10m, use=ibm5151,
-ibm6153-90|IBM 6153 Black & White display,
+ibm6153-90|IBM 6153 Black & White display (36-line),
cols#90, lines#36,
blink@, bold@, use=ibm5151,
-ibm6153-40|IBM 6153 Black & White display,
+ibm6153-40|IBM 6153 Black & White display (12-line),
cols#40, lines#12, use=ibm6153-90,
ibm8512|ibm8513|IBM color VGA Terminal,
am, mir, msgr,
ncr260intan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300an,
+ use=decid+cpr, use=ncr260vt300an,
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC VT200/300 with color capabilities added.
-ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard,
+ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard (132 column),
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300wan,
+ use=decid+cpr, use=ncr260vt300wan,
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC VT200/300 with color capabilities added.
ncr260intpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard,
use=ncr260vt300pp,
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC VT200/300 with color capabilities added.
-ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard in 132 column mode,
+ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard (132 column),
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300wpp,
sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
smso=\EG4, smul=\EG8, smxon=\Ec21, use=ncr260vp+sl,
-ncr260vp+sl|NCR 2900/260 viewpoint,
+ncr260vp+sl|NCR 2900/260 viewpoint with status-line,
hs,
dsl=\E`c, fsl=\r, tsl=\EF,
%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%dd$<40>, use=vt220+vtedit, use=vt220+cvis,
- use=vt220+keypad, use=ncr260vt+sl,
+ vpa=\E[%p1%dd$<40>, use=decid+cpr, use=vt220+vtedit,
+ use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
ncr260vt+sl|NCR 2900/260 VT100 status line,
hs,
dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=vt220+vtedit,
- use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
+ tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr,
+ use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
+ use=ncr260vt+sl,
ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=vt220+vtedit,
- use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
+ tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr,
+ use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
+ use=ncr260vt+sl,
ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
%p3%|%t;7%;%?%p4%t;5%;m$<120>,
sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
- tsl=\E[>+1$<70>,
+ tsl=\E[>+1$<70>, use=decid+cpr,
ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
cols#132,
is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
# "tek4105a" is just a guess:
-tek4105a|Tektronix 4105,
+tek4105a|Tektronix 4105 (BRL),
OTbs, OTpt, msgr, xon,
OTkn#8, cols#80, it#8, lines#30, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
# See
# https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
minix|minix console (v3),
+ NQ,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
\301w\302x\263y\363z\362{\343|\330}\234~\376,
# See
# https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
-# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
+# This matches the entry provided with minix 1.7.4, with bogus :ri: removed.
minix-1.7|minix console (v1.7),
- am, xenl,
- cols#80, it#8, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
- home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
- kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
- lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
- rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
- smso=\E[7m, smul=\E[4m,
+ am, xenl, xon@,
+ el1=\E[2K, is2=\E[0m, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
+ lf4=Num -, lf5=Num 5, use=minix-1.5,
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
minix-old|minix-1.5|minix console (v1.5),
- xon,
+ xon, NQ,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
- u6=\E[%i%d;%dR, u7=\E[6n,
+ use=ansi+cpr,
# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
#
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
yzz||}}~~,
bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
- rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
+ rmul@, smul@, u8=\E[?1;2c, use=decid+cpr,
use=xterm+x11mouse, use=screen4,
screen.minitel1b|Screen specific for minitel1b,
dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
- smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
+ smul@, u8=\E[?1;2c,
E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n,
- use=xterm+x11mouse, use=screen4,
+ use=decid+cpr, use=xterm+x11mouse, use=screen4,
screen.linux-m1b|Linux m1b specific for screen,
colors@, pairs@,
putty-m1|Putty Minitel 1 "like" Couleurs,
hs,
dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
- smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
- use=putty+screen, use=xterm+sl-twm, use=ecma+index,
- use=linux-m1,
+ kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
+ use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
+ use=ecma+index, use=linux-m1,
putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
hs,
dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
- smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
- use=putty+screen, use=xterm+sl-twm, use=ecma+index,
- use=linux-m1b,
+ kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
+ use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
+ use=ecma+index, use=linux-m1b,
putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
hs,
acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
{||}}~~,
dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
- smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
- use=putty+screen, use=xterm+sl-twm, use=ecma+index,
- use=linux-m2,
+ kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
+ use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
+ use=ecma+index, use=linux-m2,
-putty+screen|PuTTY with screen resizing extensions,
+putty+screen|PuTTY with screen resizing extensions (building-block),
.WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
putty-screen|PuTTY with screen resizing extensions,
%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+enq,
use=vt220+vtedit, use=ansi+pp, use=vt220+cvis,
bq300-rv|Bull VT320 reverse 80 columns,
flash=\E[?5l$<50>\E[?5h,
# <is2> sets 80 col mode, normal video, autowrap on (for <am>).
# Seems to be no way to get rid of status line.
# The manual for this puppy was dated June 1981. It claims to be VT52-
-# compatible but looks more VT100-like.
+# compatible but looks more VT100-like -esr
+#
+# According to
+# https://ub.fnwi.uva.nl/computermuseum/tab13215g.html
+# This monochrome graphics terminal of TAB Products, California, is a DEC
+# VT52/VT100/VT132 compatible alphanumeric terminal (TAB 132/15),
+# factory-fitted with additional hardware for Tektronix 4010 emulation.
+# Also the terminal understands a selection of Tektronix 4027 commands.
tab132|tab|tab132-15|tab 132/15,
da, db,
OTdN@, cols#80, lines#24, lm#96,
cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
- use=vt100+4bsd,
+ use=decid+cpr, use=vt100+4bsd,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
am, xenl,
it#8,
cuf1=\s, is2=\EPC\\, nel=\r\n, use=ti700,
-ti703-w|ti707-w|Texas Instruments Silent 703/707,
+ti703-w|ti707-w|Texas Instruments Silent 703/707 (132 column),
cols#132,
is2=\EPD\\, use=ti703,
# We don't know whether or not the apollo guys replicated DEC's firmware bug
# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
# both these capabilities.
-apollo_15P|Apollo 15 inch display,
+apollo+vt132|Apollo console emulating VT132,
rmir@, smir@, use=vt132,
+
+apollo_15P|Apollo 15 inch display,
+ use=apollo+vt132,
apollo_19L|Apollo 19 inch display,
- rmir@, smir@, use=vt132,
+ use=apollo+vt132,
apollo_color|Apollo color display,
- rmir@, smir@, use=vt132,
+ use=apollo+vt132,
#### AT&T consoles
# E3 clears the terminal's scrollback buffer. This was implemented in the
# Linux 3.0 kernel as a security feature. It matches a feature which was
# added in xterm patch #107.
+# NQ denotes a terminal which does not support the standard query/response used
+# in u6/u7 (cursor position) and u8/u9 (device attributes).
# U8 is a numeric capability which denotes a terminal emulator which does not
# support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
# value to enable it.
# + add teken-16color, teken-vt and teken-sc -TD
# + add a few missing details for vte-2018 (report by Robert Lange) -TD
#
+# 2022-03-27
+# + make description-fields distinct -TD
+#
+# 2022-04-30
+# + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and
+# also provide for focus in/out responses -TD
+#
+# 2022-05-28
+# + expanded notes for teken/syscons -TD
+#
+# 2022-06-04
+# + remove u6-u9 from teken-2018 -TD
+# + set "xterm-new" to "xterm-p370", add "xterm-p371" -TD
+#
+# 2022-06-18
+# + revise kon/kon2/jfbterm to undo "linux2.6" change to
+# smacs/rmacs/enacs (Debian #1012800) -TD
+# + amended note for att610+cvis0, as per documentation for att610,
+# att620, att730 -TD
+#
+# 2022-06-25
+# + correct dsl in dec+sl (report by Rajeev Pillai) -TD
+# + add/use ansi+cpr, decid+cpr -TD
+#
+# 2022-07-03
+# + use NQ to flag entries where the terminal does not support query and
+# response -TD
+# + use ansi+enq and decid+cpr in cases where the terminal probably
+# supported the u6-u9 extension -TD
+# + add/use apollo+vt132, xterm+alt47 -TD
+#
+# 2022-08-27
+# + modify nsterm to use xterm+alt1049 (report by Paul Handly) -TD
+# + modify putty to use xterm+alt1049 -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!