X-Git-Url: http://ncurses.scripts.mit.edu/?a=blobdiff_plain;ds=sidebyside;f=doc%2Fhtml%2Fman%2Fncurses.3x.html;h=8b1dee843247a8907e220114fabf8401d17d93d8;hb=f6718d80c998008de6cfe8e6296bee3958ff86d7;hp=83995f9e1407afe0068f2bec6000c2e003870510;hpb=46722468f47c2b77b3987729b4bcf2321cccfd01;p=ncurses.git
diff --git a/doc/html/man/ncurses.3x.html b/doc/html/man/ncurses.3x.html
index 83995f9e..8b1dee84 100644
--- a/doc/html/man/ncurses.3x.html
+++ b/doc/html/man/ncurses.3x.html
@@ -2,7 +2,7 @@
@@ -41,6 +41,10 @@
+ncurses(3x) ncurses(3x)
+
+
+
NAME
@@ -55,42 +59,62 @@
DESCRIPTION
The ncurses library routines give the user a terminal-
- independent method of updating character screens with
- reasonable optimization. This implementation is ``new
+ independent method of updating character screens with rea-
+ sonable optimization. This implementation is ``new
curses'' (ncurses) and is the approved replacement for
- 4.4BSD classic curses, which has been discontinued.
-
- The ncurses routines emulate the curses(3x) library of
- System V Release 4 UNIX, and the XPG4 curses standard (XSI
- curses) but the ncurses library is freely redistributable
- in source form. Differences from the SVr4 curses are
- summarized under the EXTENSIONS and BUGS sections below
- and described in detail in the EXTENSIONS and BUGS
- sections of individual man pages.
+ 4.4BSD classic curses, which has been discontinued. This
+ describes ncurses version 5.6 (patch 20081011).
+
+ The ncurses library emulates the curses(3x) library of
+ System V Release 4 UNIX, and XPG4 (X/Open Portability
+ Guide) curses (also known as XSI curses). XSI stands for
+ X/Open System Interfaces Extension. The ncurses library
+ is freely redistributable in source form. Differences
+ from the SVr4 curses are summarized under the EXTENSIONS
+ and PORTABILITY sections below and described in detail in
+ the respective EXTENSIONS, PORTABILITY and BUGS sections
+ of individual man pages.
+
+ The ncurses library also provides many useful extensions,
+ i.e., features which cannot be implemented by a simple
+ add-on library but which require access to the internals
+ of the library.
A program using these routines must be linked with the
-lncurses option, or (if it has been generated) with the
debugging library -lncurses_g. (Your system integrator
may also have installed these libraries under the names
-lcurses and -lcurses_g.) The ncurses_g library generates
- trace logs (in a file called 'trace' in the current
- directory) that describe curses actions.
-
- The ncurses package supports: overall screen, window and
- pad manipulation; output to windows and pads; reading
- terminal input; control over terminal and curses input and
- output options; environment query routines; color
- manipulation; use of soft label keys; terminfo
- capabilities; and access to low-level terminal-
- manipulation routines.
-
- To initialize the routines, the routine initscr or newterm
- must be called before any of the other routines that deal
- with windows and screens are used. The routine endwin
- must be called before exiting. To get character-at-a-time
- input without echoing (most interactive, screen oriented
- programs want this), the following sequence should be
- used:
+ trace logs (in a file called 'trace' in the current direc-
+ tory) that describe curses actions. See also the section
+ on ALTERNATE CONFIGURATIONS.
+
+ The ncurses package supports: overall screen, window and
+ pad manipulation; output to windows and pads; reading ter-
+ minal input; control over terminal and curses input and
+ output options; environment query routines; color manipu-
+ lation; use of soft label keys; terminfo capabilities; and
+ access to low-level terminal-manipulation routines.
+
+ The library uses the locale which the calling program has
+ initialized. That is normally done with setlocale:
+
+ setlocale(LC_ALL, "");
+
+ If the locale is not initialized, the library assumes that
+ characters are printable as in ISO-8859-1, to work with
+ certain legacy programs. You should initialize the locale
+ and not rely on specific details of the library when the
+ locale has not been setup.
+
+ The function initscr or newterm must be called to initial-
+ ize the library before any of the other routines that deal
+ with windows and screens are used. The routine endwin
+ must be called before exiting.
+
+ To get character-at-a-time input without echoing (most
+ interactive, screen oriented programs want this), the fol-
+ lowing sequence should be used:
initscr(); cbreak(); noecho();
@@ -100,33 +124,33 @@
intrflush(stdscr, FALSE);
keypad(stdscr, TRUE);
- Before a curses program is run, the tab stops of the
- terminal should be set and its initialization strings, if
+ Before a curses program is run, the tab stops of the ter-
+ minal should be set and its initialization strings, if
defined, must be output. This can be done by executing
the tput init command after the shell environment variable
TERM has been exported. tset(1) is usually responsible
for doing this. [See terminfo(5) for further details.]
- The ncurses library permits manipulation of data
- structures, called windows, which can be thought of as
- two-dimensional arrays of characters representing all or
- part of a CRT screen. A default window called stdscr,
- which is the size of the terminal screen, is supplied.
- Others may be created with newwin.
+ The ncurses library permits manipulation of data struc-
+ tures, called windows, which can be thought of as two-
+ dimensional arrays of characters representing all or part
+ of a CRT screen. A default window called stdscr, which is
+ the size of the terminal screen, is supplied. Others may
+ be created with newwin.
Note that curses does not handle overlapping windows,
- that's done by the panel(3x) library. This means that you
- can either use stdscr or divide the screen into tiled
- windows and not using stdscr at all. Mixing the two will
+ that's done by the panel(3x) library. This means that you
+ can either use stdscr or divide the screen into tiled win-
+ dows and not using stdscr at all. Mixing the two will
result in unpredictable, and undesired, effects.
Windows are referred to by variables declared as WINDOW *.
These data structures are manipulated with routines
described here and elsewhere in the ncurses manual pages.
- Among which the most basic routines are move and addch.
+ Among those, the most basic routines are move and addch.
More general versions of these routines are included with
names beginning with w, allowing the user to specify a
- window. The routines not beginning with w affect stdscr.)
+ window. The routines not beginning with w affect stdscr.
After using routines to manipulate a window, refresh is
called, telling curses to make the user's CRT screen look
@@ -137,32 +161,32 @@
Special windows called pads may also be manipulated.
These are windows which are not constrained to the size of
- the screen and whose contents need not be completely
- displayed. See curs_pad(3x) for more information.
+ the screen and whose contents need not be completely dis-
+ played. See curs_pad(3x) for more information.
In addition to drawing characters on the screen, video
- attributes and colors may be supported, causing the
- characters to show up in such modes as underlined, in
- reverse video, or in color on terminals that support such
- display enhancements. Line drawing characters may be
- specified to be output. On input, curses is also able to
- translate arrow and function keys that transmit escape
- sequences into single values. The video attributes, line
- drawing characters, and input values use names, defined in
+ attributes and colors may be supported, causing the char-
+ acters to show up in such modes as underlined, in reverse
+ video, or in color on terminals that support such display
+ enhancements. Line drawing characters may be specified to
+ be output. On input, curses is also able to translate
+ arrow and function keys that transmit escape sequences
+ into single values. The video attributes, line drawing
+ characters, and input values use names, defined in
<curses.h>, such as A_REVERSE, ACS_HLINE, and KEY_LEFT.
If the environment variables LINES and COLUMNS are set, or
if the program is executing in a window environment, line
and column information in the environment will override
- information read by terminfo. This would effect a program
+ information read by terminfo. This would affect a program
running in an AT&T 630 layer, for example, where the size
of a screen is changeable (see ENVIRONMENT).
- If the environment variable TERMINFO is defined, any
- program using curses checks for a local terminal
- definition before checking in the standard place. For
- example, if TERM is set to att4424, then the compiled
- terminal definition is found in
+ If the environment variable TERMINFO is defined, any pro-
+ gram using curses checks for a local terminal definition
+ before checking in the standard place. For example, if
+ TERM is set to att4424, then the compiled terminal defini-
+ tion is found in
/usr/share/terminfo/a/att4424.
@@ -177,25 +201,24 @@
/usr/share/terminfo/a/att4424.
This is useful for developing experimental definitions or
- when write permission in /usr/share/terminfo is not
- available.
+ when write permission in /usr/share/terminfo is not avail-
+ able.
The integer variables LINES and COLS are defined in
<curses.h> and will be filled in by initscr with the size
- of the screen. The constants TRUE and FALSE have the
- values 1 and 0, respectively.
+ of the screen. The constants TRUE and FALSE have the val-
+ ues 1 and 0, respectively.
The curses routines also define the WINDOW * variable
curscr which is used for certain low-level operations like
clearing and redrawing a screen containing garbage. The
curscr can be used in only a few routines.
-
Routine and Argument Names
- Many curses routines have two or more versions. The
- routines prefixed with w require a window argument. The
- routines prefixed with p require a pad argument. Those
- without a prefix generally use stdscr.
+ Many curses routines have two or more versions. The rou-
+ tines prefixed with w require a window argument. The rou-
+ tines prefixed with p require a pad argument. Those with-
+ out a prefix generally use stdscr.
The routines prefixed with mv require a y and x coordinate
to move to before performing the appropriate action. The
@@ -209,15 +232,70 @@
specified before the coordinates.
In each case, win is the window affected, and pad is the
- pad affected; win and pad are always pointers to type
- WINDOW.
+ pad affected; win and pad are always pointers to type WIN-
+ DOW.
Option setting routines require a Boolean flag bf with the
- value TRUE or FALSE; bf is always of type bool. The
- variables ch and attrs below are always of type chtype.
- The types WINDOW, SCREEN, bool, and chtype are defined in
- <curses.h>. The type TERMINAL is defined in <term.h>.
- All other arguments are integers.
+ value TRUE or FALSE; bf is always of type bool. Most of
+ the data types used in the library routines, such as WIN-
+ DOW, SCREEN, bool, and chtype are defined in <curses.h>.
+ Types used for the terminfo routines such as TERMINAL are
+ defined in <term.h>.
+
+ This manual page describes functions which may appear in
+ any configuration of the library. There are two common
+ configurations of the library:
+
+ ncurses
+ the "normal" library, which handles 8-bit
+ characters. The normal (8-bit) library stores
+ characters combined with attributes in chtype
+ data.
+
+ Attributes alone (no corresponding character)
+ may be stored in chtype or the equivalent
+ attr_t data. In either case, the data is
+ stored in something like an integer.
+
+ Each cell (row and column) in a WINDOW is
+ stored as a chtype.
+
+ ncursesw
+ the so-called "wide" library, which handles
+ multibyte characters (See the section on
+ ALTERNATE CONFIGURATIONS). The "wide" library
+ includes all of the calls from the "normal"
+ library. It adds about one third more calls
+ using data types which store multibyte charac-
+ ters:
+
+ cchar_t
+ corresponds to chtype. However it is a
+ structure, because more data is stored
+ than can fit into an integer. The char-
+ acters are large enough to require a full
+ integer value - and there may be more
+ than one character per cell. The video
+ attributes and color are stored in sepa-
+ rate fields of the structure.
+
+ Each cell (row and column) in a WINDOW is
+ stored as a cchar_t.
+
+ wchar_t
+ stores a "wide" character. Like chtype,
+ this may be an integer.
+
+ wint_t
+ stores a wchar_t or WEOF - not the same,
+ though both may have the same size.
+
+ The "wide" library provides new functions
+ which are analogous to functions in the "nor-
+ mal" library. There is a naming convention
+ which relates many of the normal/wide vari-
+ ants: a "_w" is inserted into the name. For
+ example, waddch becomes wadd_wch.
Routine Name Index
@@ -226,11 +304,13 @@
flagged with `*' are ncurses-specific, not described by
XPG4 or present in SVr4.
+
curses Routine Name Manual Page Name
--------------------------------------------
COLOR_PAIR curs_color(3x)
PAIR_NUMBER curs_attr(3x)
_nc_tracebits curs_trace(3x)*
+
_traceattr curs_trace(3x)*
_traceattr2 curs_trace(3x)*
_tracechar curs_trace(3x)*
@@ -262,7 +342,6 @@
bkgd curs_bkgd(3x)
bkgdset curs_bkgd(3x)
bkgrnd curs_bkgrnd(3x)
-
bkgrndset curs_bkgrnd(3x)
border curs_border(3x)
border_set curs_border_set(3x)
@@ -297,6 +376,7 @@
echochar curs_addch(3x)
endwin curs_initscr(3x)
erase curs_clear(3x)
+
erasechar curs_termattrs(3x)
erasewchar curs_termattrs(3x)
filter curs_util(3x)
@@ -304,19 +384,27 @@
flushinp curs_util(3x)
get_wch curs_get_wch(3x)
get_wstr curs_get_wstr(3x)
+ getattrs curs_attr(3x)
+ getbegx curs_legacy(3x)*
+ getbegy curs_legacy(3x)*
getbegyx curs_getyx(3x)
getbkgd curs_bkgd(3x)
getbkgrnd curs_bkgrnd(3x)
getcchar curs_getcchar(3x)
getch curs_getch(3x)
+ getcurx curs_legacy(3x)*
+ getcury curs_legacy(3x)*
+ getmaxx curs_legacy(3x)*
+ getmaxy curs_legacy(3x)*
getmaxyx curs_getyx(3x)
getmouse curs_mouse(3x)*
getn_wstr curs_get_wstr(3x)
getnstr curs_getstr(3x)
+ getparx curs_legacy(3x)*
+ getpary curs_legacy(3x)*
getparyx curs_getyx(3x)
getstr curs_getstr(3x)
getsyx curs_kernel(3x)
-
getwin curs_util(3x)
getyx curs_getyx(3x)
halfdelay curs_inopts(3x)
@@ -351,9 +439,22 @@
instr curs_instr(3x)
intrflush curs_inopts(3x)
inwstr curs_inwstr(3x)
+ is_cleared curs_opaque(3x)*
+ is_idcok curs_opaque(3x)*
+ is_idlok curs_opaque(3x)*
+
+ is_immedok curs_opaque(3x)*
+ is_keypad curs_opaque(3x)*
+ is_leaveok curs_opaque(3x)*
is_linetouched curs_touch(3x)
+ is_nodelay curs_opaque(3x)*
+ is_notimeout curs_opaque(3x)*
+ is_scrollok curs_opaque(3x)*
+ is_syncok curs_opaque(3x)*
+ is_term_resized resizeterm(3x)*
is_wintouched curs_touch(3x)
isendwin curs_initscr(3x)
+ key_defined key_defined(3x)*
key_name curs_util(3x)
keybound keybound(3x)*
keyname curs_util(3x)
@@ -370,7 +471,6 @@
mousemask curs_mouse(3x)*
move curs_move(3x)
mvadd_wch curs_add_wch(3x)
-
mvadd_wchnstr curs_add_wchstr(3x)
mvadd_wchstr curs_add_wchstr(3x)
mvaddch curs_addch(3x)
@@ -408,6 +508,7 @@
mvinsstr curs_insstr(3x)
mvinstr curs_instr(3x)
mvinwstr curs_inwstr(3x)
+
mvprintw curs_printw(3x)
mvscanw curs_scanw(3x)
mvvline curs_border(3x)
@@ -424,7 +525,6 @@
mvwaddwstr curs_addwstr(3x)
mvwchgat curs_attr(3x)
mvwdelch curs_delch(3x)
-
mvwget_wch curs_get_wch(3x)
mvwget_wstr curs_get_wstr(3x)
mvwgetch curs_getch(3x)
@@ -462,6 +562,7 @@
nocbreak curs_inopts(3x)
nodelay curs_inopts(3x)
noecho curs_inopts(3x)
+ nofilter curs_util(3x)*
nonl curs_outopts(3x)
noqiflush curs_inopts(3x)
noraw curs_inopts(3x)
@@ -473,12 +574,12 @@
pnoutrefresh curs_pad(3x)
prefresh curs_pad(3x)
printw curs_printw(3x)
+
putp curs_terminfo(3x)
putwin curs_util(3x)
qiflush curs_inopts(3x)
raw curs_inopts(3x)
redrawwin curs_refresh(3x)
-
refresh curs_refresh(3x)
reset_prog_mode curs_kernel(3x)
reset_shell_mode curs_kernel(3x)
@@ -532,7 +633,6 @@
tgetnum curs_termcap(3x)
tgetstr curs_termcap(3x)
tgoto curs_termcap(3x)
-
tigetflag curs_terminfo(3x)
tigetnum curs_terminfo(3x)
tigetstr curs_terminfo(3x)
@@ -540,6 +640,7 @@
touchline curs_touch(3x)
touchwin curs_touch(3x)
tparm curs_terminfo(3x)
+
tputs curs_termcap(3x)
tputs curs_terminfo(3x)
trace curs_trace(3x)*
@@ -552,6 +653,7 @@
use_default_colors default_colors(3x)*
use_env curs_util(3x)
use_extended_names curs_extend(3x)*
+ use_legacy_coding legacy_coding(3x)*
vid_attr curs_terminfo(3x)
vid_puts curs_terminfo(3x)
vidattr curs_terminfo(3x)
@@ -586,7 +688,6 @@
wborder curs_border(3x)
wborder_set curs_border_set(3x)
wchgat curs_attr(3x)
-
wclear curs_clear(3x)
wclrtobot curs_clear(3x)
wclrtoeol curs_clear(3x)
@@ -605,6 +706,7 @@
wgetn_wstr curs_get_wstr(3x)
wgetnstr curs_getstr(3x)
wgetstr curs_getstr(3x)
+
whline curs_border(3x)
whline_set curs_border_set(3x)
win_wch curs_in_wch(3x)
@@ -640,7 +742,6 @@
wsyncdown curs_window(3x)
wsyncup curs_window(3x)
wtimeout curs_inopts(3x)
-
wtouchln curs_touch(3x)
wunctrl curs_util(3x)
wvline curs_border(3x)
@@ -650,14 +751,14 @@
RETURN VALUE
Routines that return an integer return ERR upon failure
- and an integer value other than ERR upon successful
- completion, unless otherwise noted in the routine
- descriptions.
+ and an integer value other than ERR upon successful com-
+ pletion, unless otherwise noted in the routine descrip-
+ tions.
All macros return the value of the w version, except
- setscrreg, wsetscrreg, getyx, getbegyx, getmaxyx. The
+ setscrreg, wsetscrreg, getyx, getbegyx, and getmaxyx. The
return values of setscrreg, wsetscrreg, getyx, getbegyx,
- and getmaxyx are undefined (i.e., these should not be used
+ and getmaxyx are undefined (i.e., these should not be used
as the right-hand side of assignment statements).
Routines that return pointers return NULL on error.
@@ -665,72 +766,83 @@
ENVIRONMENT
- The following environment symbols are useful for
- customizing the runtime behavior of the ncurses library.
- The most important ones have been already discussed in
- detail.
+ The following environment symbols are useful for customiz-
+ ing the runtime behavior of the ncurses library. The most
+ important ones have been already discussed in detail.
BAUDRATE
- The debugging library checks this environment symbol
+ The debugging library checks this environment symbol
when the application has redirected output to a file.
- The symbol's numeric value is used for the baudrate.
- If no value is found ncurses uses 9600. This allows
- testers to construct repeatable test-cases that take
+ The symbol's numeric value is used for the baudrate.
+ If no value is found, ncurses uses 9600. This allows
+ testers to construct repeatable test-cases that take
into account costs that depend on baudrate.
CC When set, change occurrences of the command_character
- (i.e., the cmdch capability) of the loaded terminfo
- entries to the value of this symbol. Very few
- terminfo entries provide this feature.
+ (i.e., the cmdch capability) of the loaded terminfo
+ entries to the value of this symbol. Very few ter-
+ minfo entries provide this feature.
COLUMNS
Specify the width of the screen in characters.
- Applications running in a windowing environment
- usually are able to obtain the width of the window in
- which they are executing. If neither the $COLUMNS
- value nor the terminal's screen size is available,
- ncurses uses the size which may be specified in the
+ Applications running in a windowing environment usu-
+ ally are able to obtain the width of the window in
+ which they are executing. If neither the COLUMNS
+ value nor the terminal's screen size is available,
+ ncurses uses the size which may be specified in the
terminfo database (i.e., the cols capability).
- It is important that your application use a correct
- size for the screen. However, this is not always
- possible because your application may be running on a
- host which does not honor NAWS (Negotiations About
- Window Size), or because you are temporarily running
- as another user.
-
- Either COLUMNS or LINES symbols may be specified
- independently. This is mainly useful to circumvent
- legacy misfeatures of terminal descriptions, e.g.,
+ It is important that your application use a correct
+ size for the screen. This is not always possible
+ because your application may be running on a host
+ which does not honor NAWS (Negotiations About Window
+ Size), or because you are temporarily running as
+ another user. However, setting COLUMNS and/or LINES
+ overrides the library's use of the screen size
+ obtained from the operating system.
+
+ Either COLUMNS or LINES symbols may be specified
+ independently. This is mainly useful to circumvent
+ legacy misfeatures of terminal descriptions, e.g.,
xterm which commonly specifies a 65 line screen. For
- best results, lines and cols should not be specified
+ best results, lines and cols should not be specified
in a terminal description for terminals which are run
as emulations.
- Use the use_env function to disable this feature.
+ Use the use_env function to disable all use of exter-
+ nal environment (including system calls) to determine
+ the screen size.
ESCDELAY
- Specifies the total time, in milliseconds, for which
- ncurses will await a character sequence, e.g., a
- function key. The default value, 1000 milliseconds,
- is enough for most uses. However, it is made a
- variable to accommodate unusual applications.
+ Specifies the total time, in milliseconds, for which
+ ncurses will await a character sequence, e.g., a
+ function key. The default value, 1000 milliseconds,
+ is enough for most uses. However, it is made a vari-
+ able to accommodate unusual applications.
The most common instance where you may wish to change
- this value is to work with slow hosts, e.g., running
- on a network. If the host cannot read characters
- rapidly enough, it will have the same effect as if
- the terminal did not send characters rapidly enough.
+ this value is to work with slow hosts, e.g., running
+ on a network. If the host cannot read characters
+ rapidly enough, it will have the same effect as if
+ the terminal did not send characters rapidly enough.
The library will still see a timeout.
- Note that xterm mouse events are built up from
- character sequences received from the xterm. If your
+ Note that xterm mouse events are built up from char-
+ acter sequences received from the xterm. If your
application makes heavy use of multiple-clicking, you
- may wish to lengthen this default value because the
- timeout applies to the composed multi-click event as
+ may wish to lengthen this default value because the
+ timeout applies to the composed multi-click event as
well as the individual clicks.
- HOME Tells ncurses where your home directory is. That is
+ In addition to the environment variable, this imple-
+ mentation provides a global variable with the same
+ name. Portable applications should not rely upon the
+ presence of ESCDELAY in either form, but setting the
+ environment variable rather than the global variable
+ does not create problems when compiling an applica-
+ tion.
+
+ HOME Tells ncurses where your home directory is. That is
where it may read and write auxiliary terminal
descriptions:
@@ -738,12 +850,12 @@
$HOME/.terminfo
LINES
- Like COLUMNS, specify the height of the screen in
- characters. See COLUMNS for a detailed description.
+ Like COLUMNS, specify the height of the screen in
+ characters. See COLUMNS for a detailed description.
MOUSE_BUTTONS_123
This applies only to the OS/2 EMX port. It specifies
- the order of buttons on the mouse. OS/2 numbers a
+ the order of buttons on the mouse. OS/2 numbers a
3-button mouse inconsistently from other platforms:
1 = left
@@ -751,59 +863,105 @@
3 = middle.
This symbol lets you customize the mouse. The symbol
- must be three numeric digits 1-3 in any order, e.g.,
- 123 or 321. If it is not specified, ncurses uses
+ must be three numeric digits 1-3 in any order, e.g.,
+ 123 or 321. If it is not specified, ncurses uses
132.
NCURSES_ASSUMED_COLORS
- Override the compiled-in assumption that the
- terminal's default colors are white-on-black (see
- assume_default_colors(3x)). You may set the
- foreground and background color values with this
- environment variable by proving a 2-element list:
- foreground,background. For example, to tell ncurses
- to not assume anything about the colors, set this to
- "-1,-1". To make it green-on-black, set it to "2,0".
- Any positive value from zero to the terminfo
- max_colors value is allowed.
+ Override the compiled-in assumption that the termi-
+ nal's default colors are white-on-black (see
+ default_colors(3x)). You may set the foreground and
+ background color values with this environment vari-
+ able by proving a 2-element list: foreground,back-
+ ground. For example, to tell ncurses to not assume
+ anything about the colors, set this to "-1,-1". To
+ make it green-on-black, set it to "2,0". Any posi-
+ tive value from zero to the terminfo max_colors value
+ is allowed.
+
+ NCURSES_GPM_TERMS
+ This applies only to ncurses configured to use the
+ GPM interface.
+
+ If present, the environment variable is a list of one
+ or more terminal names against which the TERM envi-
+ ronment variable is matched. Setting it to an empty
+ value disables the GPM interface; using the built-in
+ support for xterm, etc.
+
+ If the environment variable is absent, ncurses will
+ attempt to open GPM if TERM contains "linux".
+
+ NCURSES_NO_HARD_TABS
+ Ncurses may use tabs as part of the cursor movement
+ optimization. In some cases, your terminal driver
+ may not handle these properly. Set this environment
+ variable to disable the feature. You can also adjust
+ your stty settings to avoid the problem.
+
+ NCURSES_NO_MAGIC_COOKIES
+ Some terminals use a magic-cookie feature which
+ requires special handling to make highlighting and
+ other video attributes display properly. You can
+ suppress the highlighting entirely for these termi-
+ nals by setting this environment variable.
NCURSES_NO_PADDING
- Most of the terminal descriptions in the terminfo
- database are written for real "hardware" terminals.
- Many people use terminal emulators which run in a
- windowing environment and use curses-based
- applications. Terminal emulators can duplicate all
- of the important aspects of a hardware terminal, but
- they do not have the same limitations. The chief
+ Most of the terminal descriptions in the terminfo
+ database are written for real "hardware" terminals.
+ Many people use terminal emulators which run in a
+ windowing environment and use curses-based
+ applications. Terminal emulators can duplicate all
+ of the important aspects of a hardware terminal, but
+ they do not have the same limitations. The chief
limitation of a hardware terminal from the standpoint
- of your application is the management of dataflow,
- i.e., timing. Unless a hardware terminal is
- interfaced into a terminal concentrator (which does
- flow control), it (or your application) must manage
+ of your application is the management of dataflow,
+ i.e., timing. Unless a hardware terminal is inter-
+ faced into a terminal concentrator (which does flow
+ control), it (or your application) must manage
dataflow, preventing overruns. The cheapest solution
- (no hardware cost) is for your program to do this by
+ (no hardware cost) is for your program to do this by
pausing after operations that the terminal does
slowly, such as clearing the display.
- As a result, many terminal descriptions (including
- the vt100) have delay times embedded. You may wish
- to use these descriptions, but not want to pay the
+ As a result, many terminal descriptions (including
+ the vt100) have delay times embedded. You may wish
+ to use these descriptions, but not want to pay the
performance penalty.
- Set the NCURSES_NO_PADDING symbol to disable all but
- mandatory padding. Mandatory padding is used as a
+ Set the NCURSES_NO_PADDING symbol to disable all but
+ mandatory padding. Mandatory padding is used as a
part of special control sequences such as flash.
NCURSES_NO_SETBUF
- Normally ncurses enables buffered output during
- terminal initialization. This is done (as in SVr4
- curses) for performance reasons. For testing
- purposes, both of ncurses and certain applications,
- this feature is made optional. Setting the
+ Normally ncurses enables buffered output during ter-
+ minal initialization. This is done (as in SVr4
+ curses) for performance reasons. For testing pur-
+ poses, both of ncurses and certain applications, this
+ feature is made optional. Setting the
NCURSES_NO_SETBUF variable disables output buffering,
- leaving the output in the original (usually line
+ leaving the output in the original (usually line
buffered) mode.
+ NCURSES_NO_UTF8_ACS
+ During initialization, the ncurses library checks for
+ special cases where VT100 line-drawing (and the cor-
+ responding alternate character set capabilities)
+ described in the terminfo are known to be missing.
+ Specifically, when running in a UTF-8 locale, the
+ Linux console emulator and the GNU screen program
+ ignore these. Ncurses checks the TERM environment
+ variable for these. For other special cases, you
+ should set this environment variable. Doing this
+ tells ncurses to use Unicode values which correspond
+ to the VT100 line-drawing glyphs. That works for the
+ special cases cited, and is likely to work for termi-
+ nal emulators.
+
+ When setting this variable, you should set it to a
+ nonzero value. Setting it to zero (or to a nonnum-
+ ber) disables the special check for Linux and screen.
+
NCURSES_TRACE
During initialization, the ncurses debugging library
checks the NCURSES_TRACE symbol. If it is defined,
@@ -819,8 +977,8 @@
distinct, though many are similar.
TERMCAP
- If the ncurses library has been configured with
- termcap support, ncurses will check for a terminal's
+ If the ncurses library has been configured with term-
+ cap support, ncurses will check for a terminal's
description in termcap form if it is not available in
the terminfo database.
@@ -838,7 +996,7 @@
The complete list of directories in order follows:
- the last directory to which ncurses wrote, if any,
- is searched first.
+ is searched first
- the directory specified by the TERMINFO symbol
@@ -851,21 +1009,21 @@
/usr/share/terminfo
TERMINFO_DIRS
- Specifies a list of directories to search for
- terminal descriptions. The list is separated by
- colons (i.e., ":") on Unix, semicolons on OS/2 EMX.
- All of the terminal descriptions are in terminfo
- form, which makes a subdirectory named for the first
- letter of the terminal names therein.
+ Specifies a list of directories to search for termi-
+ nal descriptions. The list is separated by colons
+ (i.e., ":") on Unix, semicolons on OS/2 EMX. All of
+ the terminal descriptions are in terminfo form, which
+ makes a subdirectory named for the first letter of
+ the terminal names therein.
TERMPATH
If TERMCAP does not hold a file name then ncurses
- checks the TERMPATH symbol. This is a list of
- filenames separated by spaces or colons (i.e., ":")
- on Unix, semicolons on OS/2 EMX. If the TERMPATH
- symbol is not set, ncurses looks in the files
- /etc/termcap, /usr/share/misc/termcap and
- $HOME/.termcap, in that order.
+ checks the TERMPATH symbol. This is a list of file-
+ names separated by spaces or colons (i.e., ":") on
+ Unix, semicolons on OS/2 EMX. If the TERMPATH symbol
+ is not set, ncurses looks in the files /etc/termcap,
+ /usr/share/misc/termcap and $HOME/.termcap, in that
+ order.
The library may be configured to disregard the following
variables when the current user is the superuser (root),
@@ -873,12 +1031,83 @@
$TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
+
+ALTERNATE CONFIGURATIONS
+ Several different configurations are possible, depending
+ on the configure script options used when building
+ ncurses. There are a few main options whose effects are
+ visible to the applications developer using ncurses:
+
+ --disable-overwrite
+ The standard include for ncurses is as noted in SYN-
+ OPSIS:
+
+ #include <curses.h>
+
+ This option is used to avoid filename conflicts when
+ ncurses is not the main implementation of curses of
+ the computer. If ncurses is installed disabling
+ overwrite, it puts its headers in a subdirectory,
+ e.g.,
+
+ #include <ncurses/curses.h>
+
+ It also omits a symbolic link which would allow you
+ to use -lcurses to build executables.
+
+ --enable-widec
+ The configure script renames the library and (if the
+ --disable-overwrite option is used) puts the header
+ files in a different subdirectory. All of the
+ library names have a "w" appended to them, i.e.,
+ instead of
+
+ -lncurses
+
+ you link with
+
+ -lncursesw
+
+ You must also define _XOPEN_SOURCE_EXTENDED when com-
+ piling for the wide-character library to use the
+ extended (wide-character) functions. The curses.h
+ file which is installed for the wide-character
+ library is designed to be compatible with the normal
+ library's header. Only the size of the WINDOW struc-
+ ture differs, and very few applications require more
+ than a pointer to WINDOWs. If the headers are
+ installed allowing overwrite, the wide-character
+ library's headers should be installed last, to allow
+ applications to be built using either library from
+ the same set of headers.
+
+ --with-shared
+
+ --with-normal
+
+ --with-debug
+
+ --with-profile
+ The shared and normal (static) library names differ
+ by their suffixes, e.g., libncurses.so and libn-
+ curses.a. The debug and profiling libraries add a
+ "_g" and a "_p" to the root names respectively, e.g.,
+ libncurses_g.a and libncurses_p.a.
+
+ --with-trace
+ The trace function normally resides in the debug
+ library, but it is sometimes useful to configure this
+ in the shared library. Configure scripts should
+ check for the function's existence rather than assum-
+ ing it is always in the debug library.
+
+
FILES
/usr/share/tabset
directory containing initialization files for the
- terminal capability database /usr/share/terminfo
- terminal capability database
+ terminal capability database /usr/share/terminfo ter-
+ minal capability database
@@ -890,15 +1119,15 @@
EXTENSIONS
The ncurses library can be compiled with an option
- (-DUSE_GETCAP) that falls back to the old-style
- /etc/termcap file if the terminal setup code cannot find a
- terminfo entry corresponding to TERM. Use of this feature
- is not recommended, as it essentially includes an entire
- termcap compiler in the ncurses startup code, at
- significant cost in core and startup cycles.
+ (-DUSE_GETCAP) that falls back to the old-style /etc/term-
+ cap file if the terminal setup code cannot find a terminfo
+ entry corresponding to TERM. Use of this feature is not
+ recommended, as it essentially includes an entire termcap
+ compiler in the ncurses startup code, at significant cost
+ in core and startup cycles.
The ncurses library includes facilities for capturing
- mouse events on certain terminals (including xterm). See
+ mouse events on certain terminals (including xterm). See
the curs_mouse(3x) manual page for details.
The ncurses library includes facilities for responding to
@@ -910,64 +1139,69 @@
The ncurses library extends the fixed set of function key
capabilities of terminals by allowing the application
designer to define additional key sequences at runtime.
- See the define_key(3x) and keyok(3x) manual pages for
- details.
-
- The ncurses library can exploit the capabilities of
- terminals which implement the ISO-6429 SGR 39 and SGR 49
- controls, which allow an application to reset the terminal
- to its original foreground and background colors. From
- the users' perspective, the application is able to draw
- colored text on a background whose color is set
- independently, providing better control over color
- contrasts. See the default_colors(3x) manual page for
- details.
-
- The ncurses library includes a function for directing
- application output to a printer attached to the terminal
+ See the define_key(3x) key_defined(3x), and keyok(3x) man-
+ ual pages for details.
+
+ The ncurses library can exploit the capabilities of termi-
+ nals which implement the ISO-6429 SGR 39 and SGR 49 con-
+ trols, which allow an application to reset the terminal to
+ its original foreground and background colors. From the
+ users' perspective, the application is able to draw col-
+ ored text on a background whose color is set indepen-
+ dently, providing better control over color contrasts.
+ See the default_colors(3x) manual page for details.
+
+ The ncurses library includes a function for directing
+ application output to a printer attached to the terminal
device. See the curs_print(3x) manual page for details.
PORTABILITY
- The ncurses library is intended to be BASE-level
- conformant with the XSI Curses standard. Certain portions
- of the EXTENDED XSI Curses functionality (including color
- support) are supported. The following EXTENDED XSI Curses
- calls in support of wide (multibyte) characters are not
- yet implemented: pecho_wchar, slk_wset.
+ The ncurses library is intended to be BASE-level confor-
+ mant with XSI Curses. The EXTENDED XSI Curses functional-
+ ity (including color support) is supported.
A small number of local differences (that is, individual
differences between the XSI Curses and ncurses calls) are
described in PORTABILITY sections of the library man
pages.
- The routine has_key is not part of XPG4, nor is it present
- in SVr4. See the curs_getch(3x) manual page for details.
+ This implementation also contains several extensions:
- The routine slk_attr is not part of XPG4, nor is it
- present in SVr4. See the curs_slk(3x) manual page for
- details.
+ The routine has_key is not part of XPG4, nor is it
+ present in SVr4. See the curs_getch(3x) manual page
+ for details.
- The routines getmouse, mousemask, ungetmouse,
- mouseinterval, and wenclose relating to mouse interfacing
- are not part of XPG4, nor are they present in SVr4. See
- the curs_mouse(3x) manual page for details.
+ The routine slk_attr is not part of XPG4, nor is it
+ present in SVr4. See the curs_slk(3x) manual page
+ for details.
+
+ The routines getmouse, mousemask, ungetmouse, mou-
+ seinterval, and wenclose relating to mouse interfac-
+ ing are not part of XPG4, nor are they present in
+ SVr4. See the curs_mouse(3x) manual page for
+ details.
- The routine mcprint was not present in any previous curses
- implementation. See the curs_print(3x) manual page for
- details.
+ The routine mcprint was not present in any previous
+ curses implementation. See the curs_print(3x) manual
+ page for details.
- The routine wresize is not part of XPG4, nor is it present
- in SVr4. See the wresize(3x) manual page for details.
+ The routine wresize is not part of XPG4, nor is it
+ present in SVr4. See the wresize(3x) manual page for
+ details.
- In historic curses versions, delays embedded in the
- capabilities cr, ind, cub1, ff and tab activated
- corresponding delay bits in the UNIX tty driver. In this
- implementation, all padding is done by NUL sends. This
- method is slightly more expensive, but narrows the
- interface to the UNIX kernel significantly and increases
- the package's portability correspondingly.
+ The WINDOW structure's internal details can be hidden
+ from application programs. See curs_opaque(3x) for
+ the discussion of is_scrollok, etc.
+
+ In historic curses versions, delays embedded in the capa-
+ bilities cr, ind, cub1, ff and tab activated corresponding
+ delay bits in the UNIX tty driver. In this implementa-
+ tion, all padding is done by sending NUL bytes. This
+ method is slightly more expensive, but narrows the inter-
+ face to the UNIX kernel significantly and increases the
+ package's portability correspondingly.
@@ -977,8 +1211,8 @@
If standard output from a ncurses program is re-directed
to something which is not a tty, screen updates will be
- directed to standard error. This was an undocumented
- feature of AT&T System V Release 3 curses.
+ directed to standard error. This was an undocumented fea-
+ ture of AT&T System V Release 3 curses.
@@ -988,54 +1222,7 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+ ncurses(3x)