- Terminfo is a data base describing terminals, used by screen-oriented
- programs such as nvi(1), rogue(1) and libraries such as curses(3x).
+ Terminfo is a database describing terminals, used by screen-oriented
+ programs such as nvi(1), lynx(1), mutt(1), and other curses
+ applications, using high-level calls to libraries such as curses(3x).
+ It is also used via low-level calls by non-curses applications which
+ may be screen-oriented (such as clear(1)) or non-screen (such as
+ tabs(1)).
+
Terminfo describes terminals by giving a set of capabilities which they
have, by specifying how to perform screen operations, and by specifying
- padding requirements and initialization sequences. This describes
- ncurses version 6.1 (patch 20190720).
+ padding requirements and initialization sequences.
+ This manual describes ncurses version 6.4 (patch 20240302).
-
Entries in terminfo consist of a sequence of fields:
o Each field ends with a comma "," (embedded commas may be escaped
@@ -116,1045 +89,891 @@
entries.
The infocmp-f and -W options rely on this to format if-then-else
- expressions, or to enforce maximum line-width. The resulting for-
- matted terminal description can be read by tic.
+ expressions, or to enforce maximum line-width. The resulting
+ formatted terminal description can be read by tic.
o The first field for each terminal gives the names which are known
for the terminal, separated by "|" characters.
- The first name given is the most common abbreviation for the termi-
- nal (its primary name), the last name given should be a long name
- fully identifying the terminal (see longname(3x)), and all others
- are treated as synonyms (aliases) for the primary terminal name.
+ The first name given is the most common abbreviation for the
+ terminal (its primary name), the last name given should be a long
+ name fully identifying the terminal (see longname(3x)), and all
+ others are treated as synonyms (aliases) for the primary terminal
+ name.
- X/Open Curses advises that all names but the last should be in
- lower case and contain no blanks; the last name may well contain
+ X/Open Curses advises that all names but the last should be in
+ lower case and contain no blanks; the last name may well contain
upper case and blanks for readability.
- This implementation is not so strict; it allows mixed case in the
+ This implementation is not so strict; it allows mixed case in the
primary name and aliases. If the last name has no embedded blanks,
- it allows that to be both an alias and a verbose name (but will
+ it allows that to be both an alias and a verbose name (but will
warn about this ambiguity).
- o Lines beginning with a "#" in the first column are treated as com-
- ments.
+ o Lines beginning with a "#" in the first column are treated as
+ comments.
- While comment lines are legal at any point, the output of captoinfo
- and infotocap (aliases for tic) will move comments so they occur
+ While comment lines are valid at any point, the output of captoinfo
+ and infotocap (aliases for tic) will move comments so they occur
only between entries.
- Terminal names (except for the last, verbose entry) should be chosen
- using the following conventions. The particular piece of hardware mak-
- ing up the terminal should have a root name, thus "hp2621". This name
- should not contain hyphens. Modes that the hardware can be in, or user
- preferences, should be indicated by appending a hyphen and a mode suf-
- fix. Thus, a vt100 in 132-column mode would be vt100-w. The following
- suffixes should be used where possible:
-
- SuffixMeaningExample
- -nn Number of lines on the screen aaa-60
- -np Number of pages of memory c100-4p
- -am With automargins (usually the default) vt100-am
- -m Mono mode; suppress color ansi-m
- -mc Magic cookie; spaces when highlighting wy30-mc
- -na No arrow keys (leave them in local) c100-na
- -nam Without automatic margins vt100-nam
- -nl No status line att4415-nl
- -ns No status line hp2626-ns
- -rv Reverse video c100-rv
- -s Enable status line vt100-s
- -vb Use visible bell instead of beep wy370-vb
- -w Wide mode (> 80 columns, usually 132) vt100-w
+ Terminal names (except for the last, verbose entry) should be chosen
+ using the following conventions. The particular piece of hardware
+ making up the terminal should have a root name, thus "hp2621". This
+ name should not contain hyphens. Modes that the hardware can be in, or
+ user preferences, should be indicated by appending a hyphen and a mode
+ suffix. Thus, a vt100 in 132-column mode would be vt100-w. The
+ following suffixes should be used where possible:
+
+ SuffixExampleMeaning
+ ------------------------------------------------------------------------
+ -nn aaa-60 Number of lines on the screen
+ -np c100-4p Number of pages of memory
+ -am vt100-am With automargins (usually the default)
+ -m ansi-m Mono mode; suppress color
+ -mc wy30-mc Magic cookie; spaces when highlighting
+ -na c100-na No arrow keys (leave them in local)
+ -nam vt100-nam Without automatic margins
+ -nl hp2621-nl No status line
+ -ns hp2626-ns No status line
+ -rv c100-rv Reverse video
+ -s vt100-s Enable status line
+ -vb wy370-vb Use visible bell instead of beep
+ -w vt100-w Wide mode (> 80 columns, usually 132)
For more on terminal naming conventions, see the term(7) manual page.
-
- The terminfo entry consists of several capabilities, i.e., features
- that the terminal has, or methods for exercising the terminal's fea-
- tures.
+
+ The terminfo entry consists of several capabilities, i.e., features
+ that the terminal has, or methods for exercising the terminal's
+ features.
After the first field (giving the name(s) of the terminal entry), there
- should be one or more capability fields. These are boolean, numeric or
+ should be one or more capability fields. These are Boolean, numeric or
string names with corresponding values:
- o Boolean capabilities are true when present, false when absent.
- There is no explicit value for boolean capabilities.
+ o Boolean capabilities are true when present, false when absent.
+ There is no explicit value for Boolean capabilities.
- o Numeric capabilities have a "#" following the name, then an
+ o Numeric capabilities have a "#" following the name, then an
unsigned decimal integer value.
- o String capabilities have a "=" following the name, then an string
+ o String capabilities have a "=" following the name, then an string
of characters making up the capability value.
- String capabilities can be split into multiple lines, just as the
- fields comprising a terminal entry can be split into multiple
- lines. While blanks between fields are ignored, blanks embedded
- within a string value are retained, except for leading blanks on a
+ String capabilities can be split into multiple lines, just as the
+ fields comprising a terminal entry can be split into multiple
+ lines. While blanks between fields are ignored, blanks embedded
+ within a string value are retained, except for leading blanks on a
line.
- Any capability can be canceled, i.e., suppressed from the terminal
+ Any capability can be canceled, i.e., suppressed from the terminal
entry, by following its name with "@" rather than a capability value.
- If there are two very similar terminals, one (the variant) can be
- defined as being just like the other (the base) with certain excep-
- tions. In the definition of the variant, the string capability use can
- be given with the name of the base terminal:
+ If there are two very similar terminals, one (the variant) can be
+ defined as being just like the other (the base) with certain
+ exceptions. In the definition of the variant, the string capability
+ use can be given with the name of the base terminal:
- o The capabilities given before use override those in the base type
+ o The capabilities given before use override those in the base type
named by use.
- o If there are multiple use capabilities, they are merged in reverse
- order. That is, the rightmost use reference is processed first,
+ o If there are multiple use capabilities, they are merged in reverse
+ order. That is, the rightmost use reference is processed first,
then the one to its left, and so forth.
- o Capabilities given explicitly in the entry override those brought
+ o Capabilities given explicitly in the entry override those brought
in by use references.
- A capability can be canceled by placing xx@ to the left of the use ref-
- erence that imports it, where xx is the capability. For example, the
- entry
+ A capability can be canceled by placing xx@ to the left of the use
+ reference that imports it, where xx is the capability. For example,
+ the entry
2621-nl, smkx@, rmkx@, use=2621,
defines a 2621-nl that does not have the smkx or rmkx capabilities, and
- hence does not turn on the function key labels when in visual mode.
- This is useful for different modes for a terminal, or for different
+ hence does not turn on the function key labels when in visual mode.
+ This is useful for different modes for a terminal, or for different
user preferences.
An entry included via use can contain canceled capabilities, which have
- the same effect as if those cancels were inline in the using terminal
+ the same effect as if those cancels were inline in the using terminal
entry.
- The following is a complete table of the capabilities included in a
- terminfo description block and available to terminfo-using code. In
+ The following is a complete table of the capabilities included in a
+ terminfo description block and available to terminfo-using code. In
each line of the table,
- The variable is the name by which the programmer (at the terminfo
- level) accesses the capability.
+ o The variable is the name by which the programmer (at the terminfo
+ level) accesses the capability.
+
+ o The capname (Cap-name) is the short name used in the text of the
+ database, and is used by a person updating the database.
+
+ Whenever possible, capnames are chosen to be the same as or similar
+ to the ANSI X3.64-1979 standard (now superseded by ECMA-48, which
+ uses identical or very similar names). Semantics are also intended
+ to match those of the specification.
- The capname is the short name used in the text of the database, and is
- used by a person updating the database. Whenever possible, capnames
- are chosen to be the same as or similar to the ANSI X3.64-1979 standard
- (now superseded by ECMA-48, which uses identical or very similar
- names). Semantics are also intended to match those of the specifica-
- tion.
+ Capability names have no hard length limit, but an informal limit
+ of 5 characters has been adopted to keep them short and to allow
+ the tabs in the source file Caps to line up nicely.
- The termcap code is the old termcap capability name (some capabilities
- are new, and have names which termcap did not originate).
+ o The termcap (Tcap) code is the old capability name (some
+ capabilities are new, and have names which termcap did not
+ originate).
- Capability names have no hard length limit, but an informal limit of 5
- characters has been adopted to keep them short and to allow the tabs in
- the source file Caps to line up nicely.
+ o Finally, the description field attempts to convey the semantics of
+ the capability.
- Finally, the description field attempts to convey the semantics of the
- capability. You may find some codes in the description field:
+ You may find some codes in the description field:
(P) indicates that padding may be specified
- #[1-9] in the description field indicates that the string is passed
- through tparm with parms as given (#i).
+ #[1-9] in the description field indicates that the string is passed
+ through tparm(3x) with parameters as given (#i).
- (P*) indicates that padding may vary in proportion to the number of
+ If no parameters are listed in the description, passing the
+ string through tparm(3x) may give unexpected results, e.g., if
+ it contains percent (%%) signs.
+
+ (P*) indicates that padding may vary in proportion to the number of
lines affected
(#i) indicates the ith parameter.
-
- These are the boolean capabilities:
-
-
- VariableCap-TCapDescription
- BooleansnameCode
- auto_left_margin bw bw cub1 wraps from col-
- umn 0 to last column
- auto_right_margin am am terminal has auto-
- matic margins
- back_color_erase bce ut screen erased with
- background color
- can_change ccc cc terminal can re-
- define existing col-
- ors
- ceol_standout_glitch xhp xs standout not erased
- by overwriting (hp)
- col_addr_glitch xhpa YA only positive motion
- for hpa/mhpa caps
-
- cpi_changes_res cpix YF changing character
- pitch changes reso-
- lution
- cr_cancels_micro_mode crxm YB using cr turns off
- micro mode
- dest_tabs_magic_smso xt xt tabs destructive,
- magic so char
- (t1061)
- eat_newline_glitch xenl xn newline ignored
- after 80 cols (con-
- cept)
- erase_overstrike eo eo can erase over-
- strikes with a blank
- generic_type gn gn generic line type
- hard_copy hc hc hardcopy terminal
- hard_cursor chts HC cursor is hard to
- see
- has_meta_key km km Has a meta key
- (i.e., sets 8th-bit)
- has_print_wheel daisy YC printer needs opera-
- tor to change char-
- acter set
- has_status_line hs hs has extra status
- line
- hue_lightness_saturation hls hl terminal uses only
- HLS color notation
- (Tektronix)
- insert_null_glitch in in insert mode distin-
- guishes nulls
- lpi_changes_res lpix YG changing line pitch
- changes resolution
- memory_above da da display may be
- retained above the
- screen
- memory_below db db display may be
- retained below the
- screen
- move_insert_mode mir mi safe to move while
- in insert mode
- move_standout_mode msgr ms safe to move while
- in standout mode
- needs_xon_xoff nxon nx padding will not
- work, xon/xoff
- required
- no_esc_ctlc xsb xb beehive (f1=escape,
- f2=ctrl C)
- no_pad_char npc NP pad character does
- not exist
- non_dest_scroll_region ndscr ND scrolling region is
- non-destructive
- non_rev_rmcup nrrmc NR smcup does not
- reverse rmcup
- over_strike os os terminal can over-
- strike
- prtr_silent mc5i 5i printer will not
- echo on screen
- row_addr_glitch xvpa YD only positive motion
- for vpa/mvpa caps
- semi_auto_right_margin sam YE printing in last
- column causes cr
- status_line_esc_ok eslok es escape can be used
- on the status line
- tilde_glitch hz hz cannot print ~'s
- (Hazeltine)
-
-
- transparent_underline ul ul underline character
- overstrikes
- xon_xoff xon xo terminal uses
- xon/xoff handshaking
-
- These are the numeric capabilities:
-
-
- VariableCap-TCapDescription
- NumericnameCode
- columns cols co number of columns in
- a line
- init_tabs it it tabs initially every
- # spaces
- label_height lh lh rows in each label
- label_width lw lw columns in each
- label
- lines lines li number of lines on
- screen or page
- lines_of_memory lm lm lines of memory if >
- line. 0 means varies
- magic_cookie_glitch xmc sg number of blank
- characters left by
- smso or rmso
- max_attributes ma ma maximum combined
- attributes terminal
- can handle
- max_colors colors Co maximum number of
- colors on screen
- max_pairs pairs pa maximum number of
- color-pairs on the
- screen
- maximum_windows wnum MW maximum number of
- definable windows
- no_color_video ncv NC video attributes
- that cannot be used
- with colors
- num_labels nlab Nl number of labels on
- screen
- padding_baud_rate pb pb lowest baud rate
- where padding needed
- virtual_terminal vt vt virtual terminal
- number (CB/unix)
- width_status_line wsl ws number of columns in
- status line
-
- The following numeric capabilities are present in the SVr4.0 term
- structure, but are not yet documented in the man page. They came in
+ Code
+ BooleanCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+
+ auto_left_marginbwbw cub1 wraps from column 0 to
+ last column
+ auto_right_marginamam terminal has automatic margins
+ no_esc_ctlcxsbxb beehive (f1=escape, f2=ctrl C)
+ ceol_standout_glitchxhpxs standout not erased by
+ overwriting (hp)
+ eat_newline_glitchxenlxn newline ignored after 80 cols
+ (concept)
+ erase_overstrikeeoeo can erase overstrikes with a
+ blank
+ generic_typegngn generic line type
+ hard_copyhchc hardcopy terminal
+ has_meta_keykmkm Has a meta key (i.e., sets
+ 8th-bit)
+ has_status_linehshs has extra status line
+ insert_null_glitchinin insert mode distinguishes
+ nulls
+ memory_abovedada display may be retained above
+ the screen
+ memory_belowdbdb display may be retained below
+ the screen
+ move_insert_modemirmi safe to move while in insert
+ mode
+ move_standout_modemsgrms safe to move while in standout
+ mode
+ over_strikeosos terminal can overstrike
+ status_line_esc_okeslokes escape can be used on the
+ status line
+ dest_tabs_magic_smsoxtxt tabs destructive, magic so
+ char (t1061)
+ tilde_glitchhzhz cannot print ~'s (Hazeltine)
+ transparent_underlineulul underline character
+ overstrikes
+ xon_xoffxonxo terminal uses xon/xoff
+ handshaking
+ needs_xon_xoffnxonnx padding will not work,
+ xon/xoff required
+ prtr_silentmc5i5i printer will not echo on
+ screen
+ hard_cursorchtsHC cursor is hard to see
+ non_rev_rmcupnrrmcNR smcup does not reverse rmcup
+ no_pad_charnpcNP pad character does not exist
+ non_dest_scroll_regionndscrND scrolling region is non-
+ destructive
+ can_changeccccc terminal can re-define
+ existing colors
+ back_color_erasebceut screen erased with background
+ color
+ hue_lightness_saturationhlshl terminal uses only HLS color
+ notation (Tektronix)
+ col_addr_glitchxhpaYA only positive motion for
+ hpa/mhpa caps
+ cr_cancels_micro_modecrxmYB using cr turns off micro mode
+ has_print_wheeldaisyYC printer needs operator to
+ change character set
+ row_addr_glitchxvpaYD only positive motion for
+ vpa/mvpa caps
+ semi_auto_right_marginsamYE printing in last column causes
+ cr
+ cpi_changes_rescpixYF changing character pitch
+ changes resolution
+ lpi_changes_reslpixYG changing line pitch changes
+ resolution
+
+ Code
+
+ NumericCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+ columnscolsco number of columns in a line
+ init_tabsitit tabs initially every # spaces
+ lineslinesli number of lines on screen or
+ page
+ lines_of_memorylmlm lines of memory if > line. 0
+ means varies
+ magic_cookie_glitchxmcsg number of blank characters
+ left by smso or rmso
+ padding_baud_ratepbpb lowest baud rate where padding
+ needed
+ virtual_terminalvtvt virtual terminal number
+ (CB/unix)
+ width_status_linewslws number of columns in status
+ line
+ num_labelsnlabNl number of labels on screen
+ label_heightlhlh rows in each label
+ label_widthlwlw columns in each label
+ max_attributesmama maximum combined attributes
+ terminal can handle
+ maximum_windowswnumMW maximum number of definable
+ windows
+ max_colorscolorsCo maximum number of colors on
+ screen
+ max_pairspairspa maximum number of color-pairs
+ on the screen
+ no_color_videoncvNC video attributes that cannot
+ be used with colors
+
+ The following numeric capabilities are present in the SVr4.0 term
+ structure, but are not yet documented in the man page. They came in
with SVr4's printer support.
-
- VariableCap-TCapDescription
- NumericnameCode
- bit_image_entwining bitwin Yo number of passes for
- each bit-image row
- bit_image_type bitype Yp type of bit-image
- device
- buffer_capacity bufsz Ya numbers of bytes
- buffered before
- printing
- buttons btns BT number of buttons on
- mouse
- dot_horz_spacing spinh Yc spacing of dots hor-
- izontally in dots
- per inch
-
- dot_vert_spacing spinv Yb spacing of pins ver-
- tically in pins per
- inch
- max_micro_address maddr Yd maximum value in
- micro_..._address
- max_micro_jump mjump Ye maximum value in
- parm_..._micro
- micro_col_size mcs Yf character step size
- when in micro mode
- micro_line_size mls Yg line step size when
- in micro mode
- number_of_pins npins Yh numbers of pins in
- print-head
- output_res_char orc Yi horizontal resolu-
- tion in units per
- line
- output_res_horz_inch orhi Yk horizontal resolu-
- tion in units per
- inch
- output_res_line orl Yj vertical resolution
- in units per line
- output_res_vert_inch orvi Yl vertical resolution
- in units per inch
- print_rate cps Ym print rate in char-
- acters per second
- wide_char_size widcs Yn character step size
- when in double wide
- mode
-
- These are the string capabilities:
-
-
- VariableCap-TCapDescription
- StringnameCode
- acs_chars acsc ac graphics charset
- pairs, based on
- vt100
- back_tab cbt bt back tab (P)
- bell bel bl audible signal
- (bell) (P)
- carriage_return cr cr carriage return (P*)
- (P*)
- change_char_pitch cpi ZA Change number of
- characters per inch
- to #1
- change_line_pitch lpi ZB Change number of
- lines per inch to #1
- change_res_horz chr ZC Change horizontal
- resolution to #1
- change_res_vert cvr ZD Change vertical res-
- olution to #1
- change_scroll_region csr cs change region to
- line #1 to line #2
- (P)
- char_padding rmp rP like ip but when in
- insert mode
- clear_all_tabs tbc ct clear all tab stops
- (P)
- clear_margins mgc MC clear right and left
- soft margins
- clear_screen clear cl clear screen and
- home cursor (P*)
- clr_bol el1 cb Clear to beginning
- of line
-
-
- clr_eol el ce clear to end of line
- (P)
- clr_eos ed cd clear to end of
- screen (P*)
- column_address hpa ch horizontal position
- #1, absolute (P)
- command_character cmdch CC terminal settable
- cmd character in
- prototype !?
- create_window cwin CW define a window #1
- from #2,#3 to #4,#5
- cursor_address cup cm move to row #1 col-
- umns #2
- cursor_down cud1 do down one line
- cursor_home home ho home cursor (if no
- cup)
- cursor_invisible civis vi make cursor invisi-
- ble
- cursor_left cub1 le move left one space
- cursor_mem_address mrcup CM memory relative cur-
- sor addressing, move
- to row #1 columns #2
- cursor_normal cnorm ve make cursor appear
- normal (undo
- civis/cvvis)
- cursor_right cuf1 nd non-destructive
- space (move right
- one space)
- cursor_to_ll ll ll last line, first
- column (if no cup)
- cursor_up cuu1 up up one line
- cursor_visible cvvis vs make cursor very
- visible
- define_char defc ZE Define a character
- #1, #2 dots wide,
- descender #3
- delete_character dch1 dc delete character
- (P*)
- delete_line dl1 dl delete line (P*)
- dial_phone dial DI dial number #1
- dis_status_line dsl ds disable status line
- display_clock dclk DK display clock
- down_half_line hd hd half a line down
- ena_acs enacs eA enable alternate
- char set
- enter_alt_charset_mode smacs as start alternate
- character set (P)
- enter_am_mode smam SA turn on automatic
- margins
- enter_blink_mode blink mb turn on blinking
- enter_bold_mode bold md turn on bold (extra
- bright) mode
- enter_ca_mode smcup ti string to start pro-
- grams using cup
- enter_delete_mode smdc dm enter delete mode
- enter_dim_mode dim mh turn on half-bright
- mode
- enter_doublewide_mode swidm ZF Enter double-wide
- mode
- enter_draft_quality sdrfq ZG Enter draft-quality
- mode
- enter_insert_mode smir im enter insert mode
- enter_italics_mode sitm ZH Enter italic mode
- enter_leftward_mode slm ZI Start leftward car-
- riage motion
-
- enter_micro_mode smicm ZJ Start micro-motion
- mode
- enter_near_letter_quality snlq ZK Enter NLQ mode
- enter_normal_quality snrmq ZL Enter normal-quality
- mode
- enter_protected_mode prot mp turn on protected
- mode
- enter_reverse_mode rev mr turn on reverse
- video mode
- enter_secure_mode invis mk turn on blank mode
- (characters invisi-
- ble)
- enter_shadow_mode sshm ZM Enter shadow-print
- mode
- enter_standout_mode smso so begin standout mode
- enter_subscript_mode ssubm ZN Enter subscript mode
- enter_superscript_mode ssupm ZO Enter superscript
- mode
- enter_underline_mode smul us begin underline mode
- enter_upward_mode sum ZP Start upward car-
- riage motion
- enter_xon_mode smxon SX turn on xon/xoff
- handshaking
- erase_chars ech ec erase #1 characters
- (P)
- exit_alt_charset_mode rmacs ae end alternate char-
- acter set (P)
- exit_am_mode rmam RA turn off automatic
- margins
- exit_attribute_mode sgr0 me turn off all
- attributes
- exit_ca_mode rmcup te strings to end pro-
- grams using cup
- exit_delete_mode rmdc ed end delete mode
- exit_doublewide_mode rwidm ZQ End double-wide mode
- exit_insert_mode rmir ei exit insert mode
- exit_italics_mode ritm ZR End italic mode
- exit_leftward_mode rlm ZS End left-motion mode
- exit_micro_mode rmicm ZT End micro-motion
- mode
- exit_shadow_mode rshm ZU End shadow-print
- mode
- exit_standout_mode rmso se exit standout mode
- exit_subscript_mode rsubm ZV End subscript mode
- exit_superscript_mode rsupm ZW End superscript mode
- exit_underline_mode rmul ue exit underline mode
- exit_upward_mode rum ZX End reverse charac-
- ter motion
- exit_xon_mode rmxon RX turn off xon/xoff
- handshaking
- fixed_pause pause PA pause for 2-3 sec-
- onds
- flash_hook hook fh flash switch hook
- flash_screen flash vb visible bell (may
- not move cursor)
- form_feed ff ff hardcopy terminal
- page eject (P*)
- from_status_line fsl fs return from status
- line
- goto_window wingo WG go to window #1
- hangup hup HU hang-up phone
- init_1string is1 i1 initialization
- string
- init_2string is2 is initialization
- string
-
- init_3string is3 i3 initialization
- string
- init_file if if name of initializa-
- tion file
- init_prog iprog iP path name of program
- for initialization
- initialize_color initc Ic initialize color #1
- to (#2,#3,#4)
- initialize_pair initp Ip Initialize color
- pair #1 to
- fg=(#2,#3,#4),
- bg=(#5,#6,#7)
- insert_character ich1 ic insert character (P)
- insert_line il1 al insert line (P*)
- insert_padding ip ip insert padding after
- inserted character
- key_a1 ka1 K1 upper left of keypad
- key_a3 ka3 K3 upper right of key-
- pad
- key_b2 kb2 K2 center of keypad
- key_backspace kbs kb backspace key
- key_beg kbeg @1 begin key
- key_btab kcbt kB back-tab key
- key_c1 kc1 K4 lower left of keypad
- key_c3 kc3 K5 lower right of key-
- pad
- key_cancel kcan @2 cancel key
- key_catab ktbc ka clear-all-tabs key
- key_clear kclr kC clear-screen or
- erase key
- key_close kclo @3 close key
- key_command kcmd @4 command key
- key_copy kcpy @5 copy key
- key_create kcrt @6 create key
- key_ctab kctab kt clear-tab key
- key_dc kdch1 kD delete-character key
- key_dl kdl1 kL delete-line key
- key_down kcud1 kd down-arrow key
- key_eic krmir kM sent by rmir or smir
- in insert mode
- key_end kend @7 end key
- key_enter kent @8 enter/send key
- key_eol kel kE clear-to-end-of-line
- key
- key_eos ked kS clear-to-end-of-
- screen key
- key_exit kext @9 exit key
- key_f0 kf0 k0 F0 function key
- key_f1 kf1 k1 F1 function key
- key_f10 kf10 k; F10 function key
- key_f11 kf11 F1 F11 function key
- key_f12 kf12 F2 F12 function key
- key_f13 kf13 F3 F13 function key
- key_f14 kf14 F4 F14 function key
- key_f15 kf15 F5 F15 function key
- key_f16 kf16 F6 F16 function key
- key_f17 kf17 F7 F17 function key
- key_f18 kf18 F8 F18 function key
- key_f19 kf19 F9 F19 function key
- key_f2 kf2 k2 F2 function key
- key_f20 kf20 FA F20 function key
- key_f21 kf21 FB F21 function key
- key_f22 kf22 FC F22 function key
- key_f23 kf23 FD F23 function key
- key_f24 kf24 FE F24 function key
-
- key_f25 kf25 FF F25 function key
- key_f26 kf26 FG F26 function key
- key_f27 kf27 FH F27 function key
- key_f28 kf28 FI F28 function key
- key_f29 kf29 FJ F29 function key
- key_f3 kf3 k3 F3 function key
- key_f30 kf30 FK F30 function key
- key_f31 kf31 FL F31 function key
- key_f32 kf32 FM F32 function key
- key_f33 kf33 FN F33 function key
- key_f34 kf34 FO F34 function key
- key_f35 kf35 FP F35 function key
- key_f36 kf36 FQ F36 function key
- key_f37 kf37 FR F37 function key
- key_f38 kf38 FS F38 function key
- key_f39 kf39 FT F39 function key
- key_f4 kf4 k4 F4 function key
- key_f40 kf40 FU F40 function key
- key_f41 kf41 FV F41 function key
- key_f42 kf42 FW F42 function key
- key_f43 kf43 FX F43 function key
- key_f44 kf44 FY F44 function key
- key_f45 kf45 FZ F45 function key
- key_f46 kf46 Fa F46 function key
- key_f47 kf47 Fb F47 function key
- key_f48 kf48 Fc F48 function key
- key_f49 kf49 Fd F49 function key
- key_f5 kf5 k5 F5 function key
- key_f50 kf50 Fe F50 function key
- key_f51 kf51 Ff F51 function key
- key_f52 kf52 Fg F52 function key
- key_f53 kf53 Fh F53 function key
- key_f54 kf54 Fi F54 function key
- key_f55 kf55 Fj F55 function key
- key_f56 kf56 Fk F56 function key
- key_f57 kf57 Fl F57 function key
- key_f58 kf58 Fm F58 function key
- key_f59 kf59 Fn F59 function key
- key_f6 kf6 k6 F6 function key
- key_f60 kf60 Fo F60 function key
- key_f61 kf61 Fp F61 function key
- key_f62 kf62 Fq F62 function key
- key_f63 kf63 Fr F63 function key
- key_f7 kf7 k7 F7 function key
- key_f8 kf8 k8 F8 function key
- key_f9 kf9 k9 F9 function key
- key_find kfnd @0 find key
- key_help khlp %1 help key
- key_home khome kh home key
- key_ic kich1 kI insert-character key
- key_il kil1 kA insert-line key
- key_left kcub1 kl left-arrow key
- key_ll kll kH lower-left key (home
- down)
- key_mark kmrk %2 mark key
- key_message kmsg %3 message key
- key_move kmov %4 move key
- key_next knxt %5 next key
- key_npage knp kN next-page key
- key_open kopn %6 open key
- key_options kopt %7 options key
- key_ppage kpp kP previous-page key
- key_previous kprv %8 previous key
- key_print kprt %9 print key
- key_redo krdo %0 redo key
-
- key_reference kref &1 reference key
- key_refresh krfr &2 refresh key
- key_replace krpl &3 replace key
- key_restart krst &4 restart key
- key_resume kres &5 resume key
- key_right kcuf1 kr right-arrow key
- key_save ksav &6 save key
- key_sbeg kBEG &9 shifted begin key
- key_scancel kCAN &0 shifted cancel key
- key_scommand kCMD *1 shifted command key
- key_scopy kCPY *2 shifted copy key
- key_screate kCRT *3 shifted create key
- key_sdc kDC *4 shifted delete-char-
- acter key
- key_sdl kDL *5 shifted delete-line
- key
- key_select kslt *6 select key
- key_send kEND *7 shifted end key
- key_seol kEOL *8 shifted clear-to-
- end-of-line key
- key_sexit kEXT *9 shifted exit key
- key_sf kind kF scroll-forward key
- key_sfind kFND *0 shifted find key
- key_shelp kHLP #1 shifted help key
- key_shome kHOM #2 shifted home key
- key_sic kIC #3 shifted insert-char-
- acter key
- key_sleft kLFT #4 shifted left-arrow
- key
- key_smessage kMSG %a shifted message key
- key_smove kMOV %b shifted move key
- key_snext kNXT %c shifted next key
- key_soptions kOPT %d shifted options key
- key_sprevious kPRV %e shifted previous key
- key_sprint kPRT %f shifted print key
- key_sr kri kR scroll-backward key
- key_sredo kRDO %g shifted redo key
- key_sreplace kRPL %h shifted replace key
- key_sright kRIT %i shifted right-arrow
- key
- key_srsume kRES %j shifted resume key
- key_ssave kSAV !1 shifted save key
- key_ssuspend kSPD !2 shifted suspend key
- key_stab khts kT set-tab key
- key_sundo kUND !3 shifted undo key
- key_suspend kspd &7 suspend key
- key_undo kund &8 undo key
- key_up kcuu1 ku up-arrow key
- keypad_local rmkx ke leave 'key-
- board_transmit' mode
- keypad_xmit smkx ks enter 'key-
- board_transmit' mode
- lab_f0 lf0 l0 label on function
- key f0 if not f0
- lab_f1 lf1 l1 label on function
- key f1 if not f1
- lab_f10 lf10 la label on function
- key f10 if not f10
- lab_f2 lf2 l2 label on function
- key f2 if not f2
- lab_f3 lf3 l3 label on function
- key f3 if not f3
- lab_f4 lf4 l4 label on function
- key f4 if not f4
-
-
- lab_f5 lf5 l5 label on function
- key f5 if not f5
- lab_f6 lf6 l6 label on function
- key f6 if not f6
- lab_f7 lf7 l7 label on function
- key f7 if not f7
- lab_f8 lf8 l8 label on function
- key f8 if not f8
- lab_f9 lf9 l9 label on function
- key f9 if not f9
- label_format fln Lf label format
- label_off rmln LF turn off soft labels
- label_on smln LO turn on soft labels
- meta_off rmm mo turn off meta mode
- meta_on smm mm turn on meta mode
- (8th-bit on)
- micro_column_address mhpa ZY Like column_address
- in micro mode
- micro_down mcud1 ZZ Like cursor_down in
- micro mode
- micro_left mcub1 Za Like cursor_left in
- micro mode
- micro_right mcuf1 Zb Like cursor_right in
- micro mode
- micro_row_address mvpa Zc Like row_address #1
- in micro mode
- micro_up mcuu1 Zd Like cursor_up in
- micro mode
- newline nel nw newline (behave like
- cr followed by lf)
- order_of_pins porder Ze Match software bits
- to print-head pins
- orig_colors oc oc Set all color pairs
- to the original ones
- orig_pair op op Set default pair to
- its original value
- pad_char pad pc padding char
- (instead of null)
- parm_dch dch DC delete #1 characters
- (P*)
- parm_delete_line dl DL delete #1 lines (P*)
- parm_down_cursor cud DO down #1 lines (P*)
- parm_down_micro mcud Zf Like parm_down_cur-
- sor in micro mode
- parm_ich ich IC insert #1 characters
- (P*)
- parm_index indn SF scroll forward #1
- lines (P)
- parm_insert_line il AL insert #1 lines (P*)
- parm_left_cursor cub LE move #1 characters
- to the left (P)
- parm_left_micro mcub Zg Like parm_left_cur-
- sor in micro mode
- parm_right_cursor cuf RI move #1 characters
- to the right (P*)
- parm_right_micro mcuf Zh Like parm_right_cur-
- sor in micro mode
- parm_rindex rin SR scroll back #1 lines
- (P)
- parm_up_cursor cuu UP up #1 lines (P*)
- parm_up_micro mcuu Zi Like parm_up_cursor
- in micro mode
- pkey_key pfkey pk program function key
- #1 to type string #2
-
-
- pkey_local pfloc pl program function key
- #1 to execute string
- #2
- pkey_xmit pfx px program function key
- #1 to transmit
- string #2
- plab_norm pln pn program label #1 to
- show string #2
- print_screen mc0 ps print contents of
- screen
- prtr_non mc5p pO turn on printer for
- #1 bytes
- prtr_off mc4 pf turn off printer
- prtr_on mc5 po turn on printer
- pulse pulse PU select pulse dialing
- quick_dial qdial QD dial number #1 with-
- out checking
- remove_clock rmclk RC remove clock
- repeat_char rep rp repeat char #1 #2
- times (P*)
- req_for_input rfi RF send next input char
- (for ptys)
- reset_1string rs1 r1 reset string
- reset_2string rs2 r2 reset string
- reset_3string rs3 r3 reset string
- reset_file rf rf name of reset file
- restore_cursor rc rc restore cursor to
- position of last
- save_cursor
- row_address vpa cv vertical position #1
- absolute (P)
- save_cursor sc sc save current cursor
- position (P)
- scroll_forward ind sf scroll text up (P)
- scroll_reverse ri sr scroll text down (P)
- select_char_set scs Zj Select character
- set, #1
- set_attributes sgr sa define video
- attributes #1-#9
- (PG9)
- set_background setb Sb Set background color
- #1
- set_bottom_margin smgb Zk Set bottom margin at
- current line
- set_bottom_margin_parm smgbp Zl Set bottom margin at
- line #1 or (if smgtp
- is not given) #2
- lines from bottom
- set_clock sclk SC set clock, #1 hrs #2
- mins #3 secs
- set_color_pair scp sp Set current color
- pair to #1
- set_foreground setf Sf Set foreground color
- #1
- set_left_margin smgl ML set left soft margin
- at current col-
- umn. See smgl.
- (ML is not in BSD
- termcap).
- set_left_margin_parm smglp Zm Set left (right)
- margin at column #1
- set_right_margin smgr MR set right soft mar-
- gin at current col-
- umn
-
-
- set_right_margin_parm smgrp Zn Set right margin at
- column #1
- set_tab hts st set a tab in every
- row, current columns
- set_top_margin smgt Zo Set top margin at
- current line
- set_top_margin_parm smgtp Zp Set top (bottom)
- margin at row #1
- set_window wind wi current window is
- lines #1-#2 cols
- #3-#4
- start_bit_image sbim Zq Start printing bit
- image graphics
- start_char_set_def scsd Zr Start character set
- definition #1, with
- #2 characters in the
- set
- stop_bit_image rbim Zs Stop printing bit
- image graphics
- stop_char_set_def rcsd Zt End definition of
- character set #1
- subscript_characters subcs Zu List of subscript-
- able characters
- superscript_characters supcs Zv List of superscript-
- able characters
- tab ht ta tab to next 8-space
- hardware tab stop
- these_cause_cr docr Zw Printing any of
- these characters
- causes CR
- to_status_line tsl ts move to status line,
- column #1
- tone tone TO select touch tone
- dialing
- underline_char uc uc underline char and
- move past it
- up_half_line hu hu half a line up
- user0 u0 u0 User string #0
- user1 u1 u1 User string #1
- user2 u2 u2 User string #2
- user3 u3 u3 User string #3
- user4 u4 u4 User string #4
- user5 u5 u5 User string #5
- user6 u6 u6 User string #6
- user7 u7 u7 User string #7
- user8 u8 u8 User string #8
- user9 u9 u9 User string #9
- wait_tone wait WA wait for dial-tone
- xoff_character xoffc XF XOFF character
- xon_character xonc XN XON character
- zero_motion zerom Zx No motion for subse-
- quent character
-
- The following string capabilities are present in the SVr4.0 term struc-
- ture, but were originally not documented in the man page.
-
-
- VariableCap-TCapDescription
- StringnameCode
- alt_scancode_esc scesa S8 Alternate escape
- for scancode emu-
- lation
- bit_image_carriage_return bicr Yv Move to beginning
- of same row
-
-
- bit_image_newline binel Zz Move to next row
- of the bit image
- bit_image_repeat birep Xy Repeat bit image
- cell #1 #2 times
- char_set_names csnm Zy Produce #1'th item
- from list of char-
- acter set names
- code_set_init csin ci Init sequence for
- multiple codesets
- color_names colornm Yw Give name for
- color #1
- define_bit_image_region defbi Yx Define rectangular
- bit image region
- device_type devt dv Indicate lan-
- guage/codeset sup-
- port
- display_pc_char dispc S1 Display PC charac-
- ter #1
- end_bit_image_region endbi Yy End a bit-image
- region
- enter_pc_charset_mode smpch S2 Enter PC character
- display mode
- enter_scancode_mode smsc S4 Enter PC scancode
- mode
- exit_pc_charset_mode rmpch S3 Exit PC character
- display mode
- exit_scancode_mode rmsc S5 Exit PC scancode
- mode
- get_mouse getm Gm Curses should get
- button events,
- parameter #1 not
- documented.
- key_mouse kmous Km Mouse event has
- occurred
- mouse_info minfo Mi Mouse status
- information
- pc_term_options pctrm S6 PC terminal
- options
- pkey_plab pfxl xl Program function
- key #1 to type
- string #2 and show
- string #3
- req_mouse_pos reqmp RQ Request mouse
- position
- scancode_escape scesc S7 Escape for scan-
- code emulation
- set0_des_seq s0ds s0 Shift to codeset 0
- (EUC set 0, ASCII)
- set1_des_seq s1ds s1 Shift to codeset 1
- set2_des_seq s2ds s2 Shift to codeset 2
- set3_des_seq s3ds s3 Shift to codeset 3
- set_a_background setab AB Set background
- color to #1, using
- ANSI escape
- set_a_foreground setaf AF Set foreground
- color to #1, using
- ANSI escape
- set_color_band setcolor Yz Change to ribbon
- color #1
- set_lr_margin smglr ML Set both left and
- right margins to
- #1, #2. (ML is
- not in BSD term-
- cap).
-
-
- set_page_length slines YZ Set page length to
- #1 lines
- set_tb_margin smgtb MT Sets both top and
- bottom margins to
- #1, #2
-
- The XSI Curses standard added these hardcopy capabilities. They were
- used in some post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. Except for YI, the ncurses termcap names for them are
- invented. According to the XSI Curses standard, they have no termcap
- names. If your compiled terminfo entries use these, they may not be
- binary-compatible with System V terminfo entries after SVr4.1; beware!
-
-
- VariableCap-TCapDescription
- StringnameCode
- enter_horizontal_hl_mode ehhlm Xh Enter horizontal
- highlight mode
- enter_left_hl_mode elhlm Xl Enter left highlight
- mode
- enter_low_hl_mode elohlm Xo Enter low highlight
- mode
- enter_right_hl_mode erhlm Xr Enter right high-
- light mode
- enter_top_hl_mode ethlm Xt Enter top highlight
- mode
- enter_vertical_hl_mode evhlm Xv Enter vertical high-
- light mode
- set_a_attributes sgr1 sA Define second set of
- video attributes
- #1-#6
- set_pglen_inch slength YI Set page length to
- #1 hundredth of an
- inch (some implemen-
- tations use sL for
- termcap).
+ Code
+ NumericCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+ buffer_capacitybufszYa numbers of bytes buffered
+ before printing
+ dot_vert_spacingspinvYb spacing of pins vertically in
+ pins per inch
+ dot_horz_spacingspinhYc spacing of dots horizontally
+ in dots per inch
+ max_micro_addressmaddrYd maximum value in
+ micro_..._address
+ max_micro_jumpmjumpYe maximum value in
+ parm_..._micro
+ micro_col_sizemcsYf character step size when in
+ micro mode
+ micro_line_sizemlsYg line step size when in micro
+ mode
+ number_of_pinsnpinsYh numbers of pins in print-head
+ output_res_charorcYi horizontal resolution in units
+ per line
+ output_res_lineorlYj vertical resolution in units
+ per line
+ output_res_horz_inchorhiYk horizontal resolution in units
+ per inch
+ output_res_vert_inchorviYl vertical resolution in units
+ per inch
+ print_ratecpsYm print rate in characters per
+ second
+ wide_char_sizewidcsYn character step size when in
+ double wide mode
+ buttonsbtnsBT number of buttons on mouse
+
+ bit_image_entwiningbitwinYo number of passes for each bit-
+ image row
+ bit_image_typebitypeYp type of bit-image device
+
+ Code
+ StringCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+ back_tabcbtbt back tab (P)
+ bellbelbl audible signal (bell) (P)
+ carriage_returncrcr carriage return (P*) (P*)
+ change_scroll_regioncsrcs change region to line #1 to
+ line #2 (P)
+ clear_all_tabstbcct clear all tab stops (P)
+ clear_screenclearcl clear screen and home cursor
+ (P*)
+ clr_eolelce clear to end of line (P)
+ clr_eosedcd clear to end of screen (P*)
+ column_addresshpach horizontal position #1,
+ absolute (P)
+ command_charactercmdchCC terminal settable cmd
+ character in prototype !?
+ cursor_addresscupcm move to row #1 columns #2
+ cursor_downcud1do down one line
+ cursor_homehomeho home cursor (if no cup)
+ cursor_invisiblecivisvi make cursor invisible
+ cursor_leftcub1le move left one space
+ cursor_mem_addressmrcupCM memory relative cursor
+ addressing, move to row #1
+ columns #2
+ cursor_normalcnormve make cursor appear normal
+ (undo civis/cvvis)
+ cursor_rightcuf1nd non-destructive space (move
+ right one space)
+ cursor_to_llllll last line, first column (if no
+ cup)
+ cursor_upcuu1up up one line
+ cursor_visiblecvvisvs make cursor very visible
+ delete_characterdch1dc delete character (P*)
+ delete_linedl1dl delete line (P*)
+ dis_status_linedslds disable status line
+ down_half_linehdhd half a line down
+ enter_alt_charset_modesmacsas start alternate character set
+ (P)
+ enter_blink_modeblinkmb turn on blinking
+ enter_bold_modeboldmd turn on bold (extra bright)
+ mode
+ enter_ca_modesmcupti string to start programs using
+ cup
+ enter_delete_modesmdcdm enter delete mode
+ enter_dim_modedimmh turn on half-bright mode
+ enter_insert_modesmirim enter insert mode
+ enter_secure_modeinvismk turn on blank mode (characters
+ invisible)
+ enter_protected_modeprotmp turn on protected mode
+ enter_reverse_moderevmr turn on reverse video mode
+ enter_standout_modesmsoso begin standout mode
+ enter_underline_modesmulus begin underline mode
+ erase_charsechec erase #1 characters (P)
+ exit_alt_charset_modermacsae end alternate character set
+ (P)
+ exit_attribute_modesgr0me turn off all attributes
+ exit_ca_modermcupte strings to end programs using
+ cup
+ exit_delete_modermdced end delete mode
+ exit_insert_modermirei exit insert mode
+
+ exit_standout_modermsose exit standout mode
+ exit_underline_modermulue exit underline mode
+ flash_screenflashvb visible bell (may not move
+ cursor)
+ form_feedffff hardcopy terminal page eject
+ (P*)
+ from_status_linefslfs return from status line
+ init_1stringis1i1 initialization string
+ init_2stringis2is initialization string
+ init_3stringis3i3 initialization string
+ init_fileifif name of initialization file
+ insert_characterich1ic insert character (P)
+ insert_lineil1al insert line (P*)
+ insert_paddingipip insert padding after inserted
+ character
+ key_backspacekbskb backspace key
+ key_catabktbcka clear-all-tabs key
+ key_clearkclrkC clear-screen or erase key
+ key_ctabkctabkt clear-tab key
+ key_dckdch1kD delete-character key
+ key_dlkdl1kL delete-line key
+ key_downkcud1kd down-arrow key
+
+ key_eickrmirkM sent by rmir or smir in insert
+ mode
+ key_eolkelkE clear-to-end-of-line key
+ key_eoskedkS clear-to-end-of-screen key
+ key_f0kf0k0 F0 function key
+ key_f1kf1k1 F1 function key
+ key_f10kf10k; F10 function key
+ key_f2kf2k2 F2 function key
+ key_f3kf3k3 F3 function key
+ key_f4kf4k4 F4 function key
+ key_f5kf5k5 F5 function key
+ key_f6kf6k6 F6 function key
+ key_f7kf7k7 F7 function key
+ key_f8kf8k8 F8 function key
+ key_f9kf9k9 F9 function key
+ key_homekhomekh home key
+ key_ickich1kI insert-character key
+ key_ilkil1kA insert-line key
+ key_leftkcub1kl left-arrow key
+ key_llkllkH lower-left key (home down)
+ key_npageknpkN next-page key
+ key_ppagekppkP previous-page key
+ key_rightkcuf1kr right-arrow key
+ key_sfkindkF scroll-forward key
+ key_srkrikR scroll-backward key
+ key_stabkhtskT set-tab key
+ key_upkcuu1ku up-arrow key
+ keypad_localrmkxke leave keyboard transmit mode
+ keypad_xmitsmkxks enter keyboard transmit mode
+ lab_f0lf0l0 label on function key f0 if
+ not f0
+ lab_f1lf1l1 label on function key f1 if
+ not f1
+ lab_f10lf10la label on function key f10 if
+ not f10
+ lab_f2lf2l2 label on function key f2 if
+ not f2
+ lab_f3lf3l3 label on function key f3 if
+ not f3
+ lab_f4lf4l4 label on function key f4 if
+ not f4
+
+
+ lab_f5lf5l5 label on function key f5 if
+ not f5
+ lab_f6lf6l6 label on function key f6 if
+ not f6
+ lab_f7lf7l7 label on function key f7 if
+ not f7
+ lab_f8lf8l8 label on function key f8 if
+ not f8
+ lab_f9lf9l9 label on function key f9 if
+ not f9
+ meta_offrmmmo turn off meta mode
+ meta_onsmmmm turn on meta mode (8th-bit on)
+ newlinenelnw newline (behave like cr
+ followed by lf)
+ pad_charpadpc padding char (instead of null)
+ parm_dchdchDC delete #1 characters (P*)
+ parm_delete_linedlDL delete #1 lines (P*)
+ parm_down_cursorcudDO down #1 lines (P*)
+ parm_ichichIC insert #1 characters (P*)
+ parm_indexindnSF scroll forward #1 lines (P)
+ parm_insert_lineilAL insert #1 lines (P*)
+ parm_left_cursorcubLE move #1 characters to the left
+ (P)
+ parm_right_cursorcufRI move #1 characters to the
+ right (P*)
+ parm_rindexrinSR scroll back #1 lines (P)
+ parm_up_cursorcuuUP up #1 lines (P*)
+ pkey_keypfkeypk program function key #1 to
+ type string #2
+ pkey_localpflocpl program function key #1 to
+ execute string #2
+ pkey_xmitpfxpx program function key #1 to
+ transmit string #2
+ print_screenmc0ps print contents of screen
+ prtr_offmc4pf turn off printer
+ prtr_onmc5po turn on printer
+ repeat_charreprp repeat char #1 #2 times (P*)
+ reset_1stringrs1r1 reset string
+ reset_2stringrs2r2 reset string
+
+ reset_3stringrs3r3 reset string
+ reset_filerfrf name of reset file
+ restore_cursorrcrc restore cursor to position of
+ last save_cursor
+ row_addressvpacv vertical position #1 absolute
+ (P)
+ save_cursorscsc save current cursor position
+ (P)
+ scroll_forwardindsf scroll text up (P)
+ scroll_reverserisr scroll text down (P)
+ set_attributessgrsa define video attributes #1-#9
+ (PG9)
+ set_tabhtsst set a tab in every row,
+ current columns
+ set_windowwindwi current window is lines #1-#2
+ cols #3-#4
+ tabhtta tab to next 8-space hardware
+ tab stop
+ to_status_linetslts move to status line, column #1
+ underline_charucuc underline char and move past
+ it
+ up_half_linehuhu half a line up
+ init_progiprogiP path name of program for
+ initialization
+ key_a1ka1K1 upper left of keypad
+
+ key_a3ka3K3 upper right of keypad
+ key_b2kb2K2 center of keypad
+ key_c1kc1K4 lower left of keypad
+ key_c3kc3K5 lower right of keypad
+ prtr_nonmc5ppO turn on printer for #1 bytes
+ char_paddingrmprP like ip but when in insert
+ mode
+ acs_charsacscac graphics charset pairs, based
+ on vt100
+ plab_normplnpn program label #1 to show
+ string #2
+ key_btabkcbtkB back-tab key
+ enter_xon_modesmxonSX turn on xon/xoff handshaking
+ exit_xon_modermxonRX turn off xon/xoff handshaking
+ enter_am_modesmamSA turn on automatic margins
+ exit_am_modermamRA turn off automatic margins
+ xon_characterxoncXN XON character
+ xoff_characterxoffcXF XOFF character
+ ena_acsenacseA enable alternate char set
+ label_onsmlnLO turn on soft labels
+ label_offrmlnLF turn off soft labels
+ key_begkbeg@1 begin key
+ key_cancelkcan@2 cancel key
+ key_closekclo@3 close key
+ key_commandkcmd@4 command key
+ key_copykcpy@5 copy key
+ key_createkcrt@6 create key
+ key_endkend@7 end key
+ key_enterkent@8 enter/send key
+ key_exitkext@9 exit key
+ key_findkfnd@0 find key
+ key_helpkhlp%1 help key
+ key_markkmrk%2 mark key
+ key_messagekmsg%3 message key
+ key_movekmov%4 move key
+ key_nextknxt%5 next key
+ key_openkopn%6 open key
+ key_optionskopt%7 options key
+ key_previouskprv%8 previous key
+ key_printkprt%9 print key
+ key_redokrdo%0 redo key
+ key_referencekref&1 reference key
+ key_refreshkrfr&2 refresh key
+ key_replacekrpl&3 replace key
+ key_restartkrst&4 restart key
+ key_resumekres&5 resume key
+ key_saveksav&6 save key
+ key_suspendkspd&7 suspend key
+ key_undokund&8 undo key
+
+ key_sbegkBEG&9 shifted begin key
+ key_scancelkCAN&0 shifted cancel key
+ key_scommandkCMD*1 shifted command key
+ key_scopykCPY*2 shifted copy key
+ key_screatekCRT*3 shifted create key
+ key_sdckDC*4 shifted delete-character key
+ key_sdlkDL*5 shifted delete-line key
+ key_selectkslt*6 select key
+ key_sendkEND*7 shifted end key
+ key_seolkEOL*8 shifted clear-to-end-of-line
+ key
+ key_sexitkEXT*9 shifted exit key
+ key_sfindkFND*0 shifted find key
+ key_shelpkHLP#1 shifted help key
+ key_shomekHOM#2 shifted home key
+
+ key_sickIC#3 shifted insert-character key
+ key_sleftkLFT#4 shifted left-arrow key
+ key_smessagekMSG%a shifted message key
+ key_smovekMOV%b shifted move key
+ key_snextkNXT%c shifted next key
+ key_soptionskOPT%d shifted options key
+ key_spreviouskPRV%e shifted previous key
+ key_sprintkPRT%f shifted print key
+ key_sredokRDO%g shifted redo key
+ key_sreplacekRPL%h shifted replace key
+ key_srightkRIT%i shifted right-arrow key
+ key_srsumekRES%j shifted resume key
+ key_ssavekSAV!1 shifted save key
+ key_ssuspendkSPD!2 shifted suspend key
+ key_sundokUND!3 shifted undo key
+ req_for_inputrfiRF send next input char (for
+ ptys)
+ key_f11kf11F1 F11 function key
+ key_f12kf12F2 F12 function key
+ key_f13kf13F3 F13 function key
+ key_f14kf14F4 F14 function key
+ key_f15kf15F5 F15 function key
+ key_f16kf16F6 F16 function key
+ key_f17kf17F7 F17 function key
+ key_f18kf18F8 F18 function key
+ key_f19kf19F9 F19 function key
+ key_f20kf20FA F20 function key
+ key_f21kf21FB F21 function key
+ key_f22kf22FC F22 function key
+ key_f23kf23FD F23 function key
+ key_f24kf24FE F24 function key
+ key_f25kf25FF F25 function key
+ key_f26kf26FG F26 function key
+ key_f27kf27FH F27 function key
+ key_f28kf28FI F28 function key
+ key_f29kf29FJ F29 function key
+ key_f30kf30FK F30 function key
+ key_f31kf31FL F31 function key
+ key_f32kf32FM F32 function key
+ key_f33kf33FN F33 function key
+ key_f34kf34FO F34 function key
+ key_f35kf35FP F35 function key
+ key_f36kf36FQ F36 function key
+ key_f37kf37FR F37 function key
+ key_f38kf38FS F38 function key
+ key_f39kf39FT F39 function key
+ key_f40kf40FU F40 function key
+ key_f41kf41FV F41 function key
+ key_f42kf42FW F42 function key
+
+ key_f43kf43FX F43 function key
+ key_f44kf44FY F44 function key
+ key_f45kf45FZ F45 function key
+ key_f46kf46Fa F46 function key
+ key_f47kf47Fb F47 function key
+ key_f48kf48Fc F48 function key
+ key_f49kf49Fd F49 function key
+ key_f50kf50Fe F50 function key
+ key_f51kf51Ff F51 function key
+ key_f52kf52Fg F52 function key
+ key_f53kf53Fh F53 function key
+ key_f54kf54Fi F54 function key
+ key_f55kf55Fj F55 function key
+ key_f56kf56Fk F56 function key
+ key_f57kf57Fl F57 function key
+
+ key_f58kf58Fm F58 function key
+ key_f59kf59Fn F59 function key
+ key_f60kf60Fo F60 function key
+ key_f61kf61Fp F61 function key
+ key_f62kf62Fq F62 function key
+ key_f63kf63Fr F63 function key
+ clr_bolel1cb Clear to beginning of line
+ clear_marginsmgcMC clear right and left soft
+ margins
+ set_left_marginsmglML set left soft margin at
+ current column. (ML is not in
+ BSD termcap).
+ set_right_marginsmgrMR set right soft margin at
+ current column
+ label_formatflnLf label format
+ set_clocksclkSC set clock, #1 hrs #2 mins #3
+ secs
+ display_clockdclkDK display clock
+ remove_clockrmclkRC remove clock
+ create_windowcwinCW define a window #1 from #2,#3
+ to #4,#5
+ goto_windowwingoWG go to window #1
+ hanguphupHU hang-up phone
+ dial_phonedialDI dial number #1
+ quick_dialqdialQD dial number #1 without
+ checking
+ tonetoneTO select touch tone dialing
+ pulsepulsePU select pulse dialing
+ flash_hookhookfh flash switch hook
+ fixed_pausepausePA pause for 2-3 seconds
+ wait_tonewaitWA wait for dial-tone
+ user0u0u0 User string #0
+ user1u1u1 User string #1
+ user2u2u2 User string #2
+ user3u3u3 User string #3
+ user4u4u4 User string #4
+ user5u5u5 User string #5
+ user6u6u6 User string #6
+ user7u7u7 User string #7
+ user8u8u8 User string #8
+ user9u9u9 User string #9
+ orig_pairopop Set default pair to its
+ original value
+ orig_colorsococ Set all color pairs to the
+ original ones
+ initialize_colorinitcIc initialize color #1 to
+ (#2,#3,#4)
+ initialize_pairinitpIp Initialize color pair #1 to
+ fg=(#2,#3,#4), bg=(#5,#6,#7)
+ set_color_pairscpsp Set current color pair to #1
+ set_foregroundsetfSf Set foreground color #1
+ set_backgroundsetbSb Set background color #1
+ change_char_pitchcpiZA Change number of characters
+ per inch to #1
+ change_line_pitchlpiZB Change number of lines per
+ inch to #1
+ change_res_horzchrZC Change horizontal resolution
+ to #1
+ change_res_vertcvrZD Change vertical resolution to
+ #1
+ define_chardefcZE Define a character #1, #2 dots
+ wide, descender #3
+ enter_doublewide_modeswidmZF Enter double-wide mode
+
+ enter_draft_qualitysdrfqZG Enter draft-quality mode
+
+ enter_italics_modesitmZH Enter italic mode
+ enter_leftward_modeslmZI Start leftward carriage motion
+ enter_micro_modesmicmZJ Start micro-motion mode
+ enter_near_letter_qualitysnlqZK Enter NLQ mode
+ enter_normal_qualitysnrmqZL Enter normal-quality mode
+ enter_shadow_modesshmZM Enter shadow-print mode
+ enter_subscript_modessubmZN Enter subscript mode
+ enter_superscript_modessupmZO Enter superscript mode
+ enter_upward_modesumZP Start upward carriage motion
+ exit_doublewide_moderwidmZQ End double-wide mode
+ exit_italics_moderitmZR End italic mode
+ exit_leftward_moderlmZS End left-motion mode
+ exit_micro_modermicmZT End micro-motion mode
+ exit_shadow_modershmZU End shadow-print mode
+ exit_subscript_modersubmZV End subscript mode
+ exit_superscript_modersupmZW End superscript mode
+ exit_upward_moderumZX End reverse character motion
+ micro_column_addressmhpaZY Like column_address in micro
+ mode
+ micro_downmcud1ZZ Like cursor_down in micro mode
+ micro_leftmcub1Za Like cursor_left in micro mode
+ micro_rightmcuf1Zb Like cursor_right in micro
+ mode
+ micro_row_addressmvpaZc Like row_address #1 in micro
+ mode
+ micro_upmcuu1Zd Like cursor_up in micro mode
+ order_of_pinsporderZe Match software bits to print-
+ head pins
+ parm_down_micromcudZf Like parm_down_cursor in micro
+ mode
+ parm_left_micromcubZg Like parm_left_cursor in micro
+ mode
+ parm_right_micromcufZh Like parm_right_cursor in
+ micro mode
+ parm_up_micromcuuZi Like parm_up_cursor in micro
+ mode
+ select_char_setscsZj Select character set, #1
+ set_bottom_marginsmgbZk Set bottom margin at current
+ line
+ set_bottom_margin_parmsmgbpZl Set bottom margin at line #1
+ or (if smgtp is not given) #2
+ lines from bottom
+ set_left_margin_parmsmglpZm Set left (right) margin at
+ column #1
+ set_right_margin_parmsmgrpZn Set right margin at column #1
+ set_top_marginsmgtZo Set top margin at current line
+ set_top_margin_parmsmgtpZp Set top (bottom) margin at row
+ #1
+ start_bit_imagesbimZq Start printing bit image
+ graphics
+ start_char_set_defscsdZr Start character set definition
+ #1, with #2 characters in the
+ set
+ stop_bit_imagerbimZs Stop printing bit image
+ graphics
+ stop_char_set_defrcsdZt End definition of character
+ set #1
+ subscript_characterssubcsZu List of subscriptable
+ characters
+ superscript_characterssupcsZv List of superscriptable
+ characters
+ these_cause_crdocrZw Printing any of these
+ characters causes CR
+ zero_motionzeromZx No motion for subsequent
+ character
+
+ The following string capabilities are present in the SVr4.0 term
+ structure, but were originally not documented in the man page.
+
+ Code
+ StringCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+ char_set_namescsnmZy Produce #1'th item from list
+ of character set names
+ key_mousekmousKm Mouse event has occurred
+ mouse_infominfoMi Mouse status information
+ req_mouse_posreqmpRQ Request mouse position
+ get_mousegetmGm Curses should get button
+ events, parameter #1 not
+ documented.
+ set_a_foregroundsetafAF Set foreground color to #1,
+ using ANSI escape
+ set_a_backgroundsetabAB Set background color to #1,
+ using ANSI escape
+ pkey_plabpfxlxl Program function key #1 to
+ type string #2 and show string
+ #3
+ device_typedevtdv Indicate language, codeset
+ support
+ code_set_initcsinci Init sequence for multiple
+ codesets
+ set0_des_seqs0dss0 Shift to codeset 0 (EUC set 0,
+ ASCII)
+ set1_des_seqs1dss1 Shift to codeset 1
+ set2_des_seqs2dss2 Shift to codeset 2
+ set3_des_seqs3dss3 Shift to codeset 3
+ set_lr_marginsmglrML Set both left and right
+ margins to #1, #2. (ML is not
+ in BSD termcap).
+ set_tb_marginsmgtbMT Sets both top and bottom
+ margins to #1, #2
+ bit_image_repeatbirepXy Repeat bit image cell #1 #2
+ times
+ bit_image_newlinebinelZz Move to next row of the bit
+ image
+ bit_image_carriage_returnbicrYv Move to beginning of same row
+ color_namescolornmYw Give name for color #1
+ define_bit_image_regiondefbiYx Define rectangular bit image
+ region
+ end_bit_image_regionendbiYy End a bit-image region
+ set_color_bandsetcolorYz Change to ribbon color #1
+ set_page_lengthslinesYZ Set page length to #1 lines
+ display_pc_chardispcS1 Display PC character #1
+ enter_pc_charset_modesmpchS2 Enter PC character display
+ mode
+ exit_pc_charset_modermpchS3 Exit PC character display mode
+ enter_scancode_modesmscS4 Enter PC scancode mode
+ exit_scancode_modermscS5 Exit PC scancode mode
+ pc_term_optionspctrmS6 PC terminal options
+ scancode_escapescescS7 Escape for scancode emulation
+ alt_scancode_escscesaS8 Alternate escape for scancode
+ emulation
+
+ The XSI Curses standard added these hardcopy capabilities. They were
+ used in some post-4.1 versions of System V curses, e.g., Solaris 2.5
+ and IRIX 6.x. Except for YI, the ncurses termcap names for them are
+ invented. According to the XSI Curses standard, they have no termcap
+ names. If your compiled terminfo entries use these, they may not be
+ binary-compatible with System V terminfo entries after SVr4.1; beware!
+
+ Code
+
+ StringCapabilityNameTITCDescription
+ ------------------------------------------------------------------------
+ enter_horizontal_hl_modeehhlmXh Enter horizontal highlight
+ mode
+ enter_left_hl_modeelhlmXl Enter left highlight mode
+ enter_low_hl_modeelohlmXo Enter low highlight mode
+ enter_right_hl_modeerhlmXr Enter right highlight mode
+ enter_top_hl_modeethlmXt Enter top highlight mode
+ enter_vertical_hl_modeevhlmXv Enter vertical highlight mode
+ set_a_attributessgr1sA Define second set of video
+ attributes #1-#6
+ set_pglen_inchslengthYI Set page length to #1
+ hundredth of an inch (some
+ implementations use sL for
+ termcap).
- The preceding section listed the predefined capabilities. They deal
- with some special features for terminals no longer (or possibly never)
- produced. Occasionally there are special features of newer terminals
- which are awkward or impossible to represent by reusing the predefined
+ The preceding section listed the predefined capabilities. They deal
+ with some special features for terminals no longer (or possibly never)
+ produced. Occasionally there are special features of newer terminals
+ which are awkward or impossible to represent by reusing the predefined
capabilities.
- ncurses addresses this limitation by allowing user-defined capabili-
- ties. The tic and infocmp programs provide the -x option for this pur-
- pose. When -x is set, tic treats unknown capabilities as user-defined.
- That is, if tic encounters a capability name which it does not recog-
- nize, it infers its type (boolean, number or string) from the syntax
- and makes an extended table entry for that capability. The
- use_extended_names(3x) function makes this information conditionally
- available to applications. The ncurses library provides the data leav-
- ing most of the behavior to applications:
-
- o User-defined capability strings whose name begins with "k" are
+ ncurses addresses this limitation by allowing user-defined
+ capabilities. The tic and infocmp programs provide the -x option for
+ this purpose. When -x is set, tic treats unknown capabilities as user-
+ defined. That is, if tic encounters a capability name which it does
+ not recognize, it infers its type (Boolean, number or string) from the
+ syntax and makes an extended table entry for that capability. The
+ use_extended_names(3x) function makes this information conditionally
+ available to applications. The ncurses library provides the data
+ leaving most of the behavior to applications:
+
+ o User-defined capability strings whose name begins with "k" are
treated as function keys.
- o The types (boolean, number, string) determined by tic can be
+ o The types (Boolean, number, string) determined by tic can be
inferred by successful calls on tigetflag, etc.
o If the capability name happens to be two characters, the capability
is also available through the termcap interface.
- While termcap is said to be extensible because it does not use a prede-
- fined set of capabilities, in practice it has been limited to the capa-
- bilities defined by terminfo implementations. As a rule, user-defined
- capabilities intended for use by termcap applications should be limited
- to booleans and numbers to avoid running past the 1023 byte limit
- assumed by termcap implementations and their applications. In particu-
- lar, providing extended sets of function keys (past the 60 numbered
- keys and the handful of special named keys) is best done using the
- longer names available using terminfo.
+ While termcap is said to be extensible because it does not use a
+ predefined set of capabilities, in practice it has been limited to the
+ capabilities defined by terminfo implementations. As a rule, user-
+ defined capabilities intended for use by termcap applications should be
+ limited to Booleans and numbers to avoid running past the 1023 byte
+ limit assumed by termcap implementations and their applications. In
+ particular, providing extended sets of function keys (past the 60
+ numbered keys and the handful of special named keys) is best done using
+ the longer names available using terminfo.
+
+ The ncurses library uses a few of these user-defined capabilities, as
+ described in user_caps(5). Other user-defined capabilities (including
+ function keys) are described in the terminal database, in the section
+ on NCURSESUSER-DEFINABLECAPABILITIES
- The following entry, describing an ANSI-standard terminal, is represen-
- tative of what a terminfo entry for a modern terminal typically looks
- like.
+ The following entry, describing an ANSI-standard terminal, is
+ representative of what a terminfo entry for a modern terminal typically
+ looks like.
ansi|ansi/pc-term compatible with color,
am, mc5i, mir, msgr,
@@ -1191,8 +1010,8 @@
beginning of each line except the first. Comments may be included on
lines beginning with "#". Capabilities in terminfo are of three types:
- o Boolean capabilities which indicate that the terminal has some par-
- ticular feature,
+ o Boolean capabilities which indicate that the terminal has some
+ particular feature,
o numeric capabilities giving the size of the terminal or the size of
particular delays, and
@@ -1209,19 +1028,19 @@
are followed by the character "#" and then a positive value. Thus
cols, which indicates the number of columns the terminal has, gives the
value "80" for ansi. Values for numeric capabilities may be specified
- in decimal, octal or hexadecimal, using the C programming language con-
- ventions (e.g., 255, 0377 and 0xff or 0xFF).
+ in decimal, octal, or hexadecimal, using the C programming language
+ conventions (e.g., 255, 0377 and 0xff or 0xFF).
Finally, string valued capabilities, such as el (clear to end of line
sequence) are given by the two-character code, an "=", and then a
string ending at the next following ",".
- A number of escape sequences are provided in the string valued capabil-
- ities for easy encoding of characters there:
+ A number of escape sequences are provided in the string valued
+ capabilities for easy encoding of characters there:
o Both \E and \e map to an ESCAPE character,
- o^x maps to a control-x for any appropriate x, and
+ o^x maps to a control-x for any appropriate x, and
o the sequences
@@ -1259,8 +1078,8 @@
the compiled terminfo files with other implementations, e.g., the
SVr4 systems, which document this. Compiled terminfo files use
null-terminated strings, with no lengths. Modifying this would
- require a new binary format, which would not work with other imple-
- mentations.
+ require a new binary format, which would not work with other
+ implementations.
Finally, characters may be given as three octal digits after a \.
@@ -1268,8 +1087,8 @@
enclosed in $<..> brackets, as in el=\EK$<5>, and padding characters
are supplied by tputs(3x) to provide this delay.
- o The delay must be a number with at most one decimal place of preci-
- sion; it may be followed by suffixes "*" or "/" or both.
+ o The delay must be a number with at most one decimal place of
+ precision; it may be followed by suffixes "*" or "/" or both.
o A "*" indicates that the padding required is proportional to the
number of lines affected by the operation, and the amount given is
@@ -1289,34 +1108,52 @@
- The ncurses library searches for terminal descriptions in several
- places. It uses only the first description found. The library has a
- compiled-in list of places to search which can be overridden by envi-
- ronment variables. Before starting to search, ncurses eliminates
- duplicates in its search list.
+ Terminal descriptions in ncurses are stored in terminal databases.
+ These databases, which are found by their pathname, may be configured
+ either as directory trees or hashed databases (see term(5)),
+
+ The library uses a compiled-in list of pathnames, which can be
+ overridden by environment variables. Before starting to search,
+ ncurses checks the search list, eliminating duplicates and pathnames
+ where no terminal database is found. The ncurses library reads the
+ first description which passes its consistency checks.
+
+ o The environment variable TERMINFO is checked first, for a terminal
+ database containing the terminal description.
- o If the environment variable TERMINFO is set, it is interpreted as
- the pathname of a directory containing the compiled description you
- are working on. Only that directory is searched.
+ o Next, ncurses looks in $HOME/.terminfo for a compiled description.
- o If TERMINFO is not set, ncurses will instead look in the directory
- $HOME/.terminfo for a compiled description.
+ This is an optional feature which may be omitted entirely from the
+ library, or limited to prevent accidental use by privileged
+ applications.
- o Next, if the environment variable TERMINFO_DIRS is set, ncurses
- will interpret the contents of that variable as a list of colon-
- separated directories (or database files) to be searched.
+ o Next, if the environment variable TERMINFO_DIRS is set, ncurses
+ interprets the contents of that variable as a list of colon-
+ separated pathnames of terminal databases to be searched.
- An empty directory name (i.e., if the variable begins or ends with
- a colon, or contains adjacent colons) is interpreted as the system
+ An empty pathname (i.e., if the variable begins or ends with a
+ colon, or contains adjacent colons) is interpreted as the system
location /usr/share/terminfo.
- o Finally, ncurses searches these compiled-in locations:
+ o Finally, ncurses searches these compiled-in locations:
- o a list of directories (/usr/local/ncurses/share/ter-
- minfo:/usr/share/terminfo), and
+ o a list of directories (/usr/share/terminfo), and
- o the system terminfo directory, /usr/share/terminfo (the com-
- piled-in default).
+ o the system terminfo directory, /usr/share/terminfo
+
+ The TERMINFO variable can contain a terminal description instead of the
+ pathname of a terminal database. If this variable begins with "hex:"
+ or "b64:" then ncurses reads a terminal description from hexadecimal-
+ or base64-encoded data, and if that description matches the name
+ sought, will use that. This encoded data can be set using the "-Q"
+ option of tic or infocmp.
+
+ The preceding addresses the usual configuration of ncurses, which uses
+ terminal descriptions prepared in terminfo format. While termcap is
+ less expressive, ncurses can also be configured to read termcap
+ descriptions. In that configuration, it checks the TERMCAP and
+ TERMPATH variables (for content and search path, respectively) after
+ the system terminal database.
@@ -1343,15 +1180,15 @@
wraps around to the beginning of the next line when it reaches the
right margin, then it should have the am capability. If the terminal
can clear its screen, leaving the cursor in the home position, then
- this is given by the clear string capability. If the terminal over-
- strikes (rather than clearing a position when a character is struck
+ this is given by the clear string capability. If the terminal
+ overstrikes (rather than clearing a position when a character is struck
over) then it should have the os capability. If the terminal is a
printing terminal, with no soft copy unit, give it both hc and os. (os
applies to storage scope terminals, such as TEKTRONIX 4010 series, as
well as hard copy and APL terminals.) If there is a code to move the
cursor to the left edge of the current row, give this as cr. (Normally
- this will be carriage return, control/M.) If there is a code to pro-
- duce an audible signal (bell, beep, etc) give this as bel.
+ this will be carriage return, control/M.) If there is a code to
+ produce an audible signal (bell, beep, etc) give this as bel.
If there is a code to move the cursor one position to the left (such as
backspace) that capability should be given as cub1. Similarly, codes
@@ -1384,14 +1221,14 @@
the effect is undefined. This is useful for drawing a box around the
edge of the screen, for example. If the terminal has switch selectable
automatic margins, the terminfo file usually assumes that this is on;
- i.e., am. If the terminal has a command which moves to the first col-
- umn of the next line, that command can be given as nel (newline). It
- does not matter if the command clears the remainder of the current
+ i.e., am. If the terminal has a command which moves to the first
+ column of the next line, that command can be given as nel (newline).
+ It does not matter if the command clears the remainder of the current
line, so if the terminal has no cr and lf it may still be possible to
craft a working nel out of one or both of them.
- These capabilities suffice to describe hard-copy and "glass-tty" termi-
- nals. Thus the model 33 teletype is described as
+ These capabilities suffice to describe hard-copy and "glass-tty"
+ terminals. Thus the model 33 teletype is described as
33|tty33|tty|model 33 teletype,
bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
@@ -1404,21 +1241,21 @@
- Cursor addressing and other strings requiring parameters in the termi-
- nal are described by a parameterized string capability, with printf-
- like escapes such as %x in it. For example, to address the cursor, the
- cup capability is given, using two parameters: the row and column to
- address to. (Rows and columns are numbered from zero and refer to the
- physical screen visible to the user, not to any unseen memory.) If the
- terminal has memory relative cursor addressing, that can be indicated
- by mrcup.
+ Cursor addressing and other strings requiring parameters in the
+ terminal are described by a parameterized string capability, with
+ printf-like escapes such as %x in it. For example, to address the
+ cursor, the cup capability is given, using two parameters: the row and
+ column to address to. (Rows and columns are numbered from zero and
+ refer to the physical screen visible to the user, not to any unseen
+ memory.) If the terminal has memory relative cursor addressing, that
+ can be indicated by mrcup.
The parameter mechanism uses a stack and special % codes to manipulate
it. Typically a sequence will push one of the parameters onto the
- stack and then print it in some format. Print (e.g., "%d") is a spe-
- cial case. Other operations, including "%t" pop their operand from the
- stack. It is noted that more complex operations are often necessary,
- e.g., in the sgr string.
+ stack and then print it in some format. Print (e.g., "%d") is a
+ special case. Other operations, including "%t" pop their operand from
+ the stack. It is noted that more complex operations are often
+ necessary, e.g., in the sgr string.
The % encodings have the following meanings:
@@ -1429,7 +1266,7 @@
the next character to be a "-" flag, avoiding interpreting "%-" as
an operator.
- %c print pop() like %c in printf
+ %c print pop() like %c in printf%s print pop() like %s in printf
@@ -1439,7 +1276,7 @@
%P[a-z]
set dynamic variable [a-z] to pop()
- %g[a-z]/
+ %g[a-z]
get dynamic variable [a-z] and push it
%P[A-Z]
@@ -1452,7 +1289,37 @@
these are simply two different sets of variables, whose values are
not reset between calls to tparm(3x). However, that fact is not
documented in other implementations. Relying on it will adversely
- impact portability to other implementations.
+ impact portability to other implementations:
+
+ o SVr2 curses supported dynamic variables. Those are set only
+ by a %P operator. A %g for a given variable without first
+ setting it with %P will give unpredictable results, because
+ dynamic variables are an uninitialized local array on the
+ stack in the tparm function.
+
+ o SVr3.2 curses supported static variables. Those are an array
+ in the TERMINAL structure (declared in term.h), and are zeroed
+ automatically when the setupterm function allocates the data.
+
+ o SVr4 curses made no further improvements to the dynamic/static
+ variable feature.
+
+ o Solaris XPG4 curses does not distinguish between dynamic and
+ static variables. They are the same. Like SVr4 curses, XPG4
+ curses does not initialize these explicitly.
+
+ o Before version 6.3, ncurses stores both dynamic and static
+ variables in persistent storage, initialized to zeros.
+
+ o Beginning with version 6.3, ncurses stores static and dynamic
+ variables in the same manner as SVr4.
+
+ o Unlike other implementations, ncurses zeros dynamic
+ variables before the first %g or %P operator.
+
+ o Like SVr2, the scope of dynamic variables in ncurses is
+ within the current call to tparm. Use static variables if
+ persistent storage is needed.
%'c' char constant c
@@ -1495,32 +1362,35 @@
with the parts indented.
Binary operations are in postfix form with the operands in the usual
- order. That is, to get x-5 one would use "%gx%{5}%-". %P and %g vari-
- ables are persistent across escape-string evaluations.
+ order. That is, to get x-5 one would use "%gx%{5}%-". %P and %g
+ variables are persistent across escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12, needs to be
- sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the
- rows and columns is inverted here, and that the row and column are
- printed as two digits. Thus its cup capability is
- "cup=6\E&%p2%2dc%p1%2dY".
-
- The Microterm ACT-IV needs the current row and column sent preceded by
- a ^T, with the row and column simply encoded in binary,
- "cup=^T%p1%c%p2%c". Terminals which use "%c" need to be able to
- backspace the cursor (cub1), and to move the cursor up one line on the
- screen (cuu1). This is necessary because it is not always safe to
- transmit \n^D and \r, as the system may change or discard them. (The
- library routines dealing with terminfo set tty modes so that tabs are
- never expanded, so \t is safe to send. This turns out to be essential
- for the Ann Arbor 4080.)
-
- A final example is the LSI ADM-3a, which uses row and column offset by
- a blank character, thus "cup=\E=%p1%' '%+%c%p2%' '%+%c". After sending
- "\E=", this pushes the first parameter, pushes the ASCII value for a
- space (32), adds them (pushing the sum on the stack in place of the two
- previous values) and outputs that value as a character. Then the same
- is done for the second parameter. More complex arithmetic is possible
- using the stack.
+ sent \E&a12c03Y padded for 6 milliseconds. The order of the rows and
+ columns is inverted here, and the row and column are printed as two
+ digits. The corresponding terminal description is expressed thus:
+ cup=\E&a%p2%dc%p1%dY$<6>,
+
+ The Microterm ACT-IV needs the current row and column sent preceded by
+ a ^T, with the row and column simply encoded in binary,
+ cup=^T%p1%c%p2%c
+
+ Terminals which use "%c" need to be able to backspace the cursor
+ (cub1), and to move the cursor up one line on the screen (cuu1). This
+ is necessary because it is not always safe to transmit \n^D and \r, as
+ the system may change or discard them. (The library routines dealing
+ with terminfo set tty modes so that tabs are never expanded, so \t is
+ safe to send. This turns out to be essential for the Ann Arbor 4080.)
+
+ A final example is the LSI ADM-3a, which uses row and column offset by
+ a blank character, thus
+ cup=\E=%p1%' '%+%c%p2%' '%+%c
+
+ After sending "\E=", this pushes the first parameter, pushes the ASCII
+ value for a space (32), adds them (pushing the sum on the stack in
+ place of the two previous values) and outputs that value as a
+ character. Then the same is done for the second parameter. More
+ complex arithmetic is possible using the stack.
@@ -1530,31 +1400,140 @@
involve going up with cuu1 from the home position, but a program should
never do this itself (unless ll does) because it can make no assumption
about the effect of moving up from the home position. Note that the
- home position is the same as addressing to (0,0): to the top left cor-
- ner of the screen, not of memory. (Thus, the \EH sequence on HP termi-
- nals cannot be used for home.)
+ home position is the same as addressing to (0,0): to the top left
+ corner of the screen, not of memory. (Thus, the \EH sequence on HP
+ terminals cannot be used for home.)
If the terminal has row or column absolute cursor addressing, these can
be given as single parameter capabilities hpa (horizontal position
absolute) and vpa (vertical position absolute). Sometimes these are
shorter than the more general two parameter sequence (as with the
- hp2645) and can be used in preference to cup. If there are parameter-
- ized local motions (e.g., move n spaces to the right) these can be
- given as cud, cub, cuf, and cuu with a single parameter indicating how
- many spaces to move. These are primarily useful if the terminal does
- not have cup, such as the TEKTRONIX 4025.
+ hp2645) and can be used in preference to cup. If there are
+ parameterized local motions (e.g., move n spaces to the right) these
+ can be given as cud, cub, cuf, and cuu with a single parameter
+ indicating how many spaces to move. These are primarily useful if the
+ terminal does not have cup, such as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running a program
that uses these capabilities, the codes to enter and exit this mode can
be given as smcup and rmcup. This arises, for example, from terminals
like the Concept with more than one page of memory. If the terminal
- has only memory relative cursor addressing and not screen relative cur-
- sor addressing, a one screen-sized window must be fixed into the termi-
- nal for cursor addressing to work properly. This is also used for the
- TEKTRONIX 4025, where smcup sets the command character to be the one
- used by terminfo. If the smcup sequence will not restore the screen
- after an rmcup sequence is output (to the state prior to outputting
- rmcup), specify nrrmc.
+ has only memory relative cursor addressing and not screen relative
+ cursor addressing, a one screen-sized window must be fixed into the
+ terminal for cursor addressing to work properly. This is also used for
+ the TEKTRONIX 4025, where smcup sets the command character to be the
+ one used by terminfo. If the smcup sequence will not restore the
+ screen after an rmcup sequence is output (to the state prior to
+ outputting rmcup), specify nrrmc.
+
+
+
+ SVr4 (and X/Open Curses) list several string capabilities for setting
+ margins. Two were intended for use with terminals, and another six
+ were intended for use with printers.
+
+ o The two terminal capabilities assume that the terminal may have the
+ capability of setting the left and/or right margin at the current
+ cursor column position.
+
+ o The printer capabilities assume that the printer may have two types
+ of capability:
+
+ o the ability to set a top and/or bottom margin using the current
+ line position, and
+
+ o parameterized capabilities for setting the top, bottom, left,
+ right margins given the number of rows or columns.
+
+ In practice, the categorization into "terminal" and "printer" is not
+ suitable:
+
+ o The AT&T SVr4 terminal database uses smgl four times, for AT&T
+ hardware.
+
+ Three of the four are printers. They lack the ability to set
+ left/right margins by specifying the column.
+
+ o Other (non-AT&T) terminals may support margins but using different
+ assumptions from AT&T.
+
+ For instance, the DEC VT420 supports left/right margins, but only
+ using a column parameter. As an added complication, the VT420 uses
+ two settings to fully enable left/right margins (left/right margin
+ mode, and origin mode). The former enables the margins, which
+ causes printed text to wrap within margins, but the latter is
+ needed to prevent cursor-addressing outside those margins.
+
+ o Both DEC VT420 left/right margins are set with a single control
+ sequence. If either is omitted, the corresponding margin is set to
+ the left or right edge of the display (rather than leaving the
+ margin unmodified).
+
+ These are the margin-related capabilities:
+
+ NameDescription
+ ---------------------------------------------------
+ smgl Set left margin at current column
+ smgr Set right margin at current column
+ smgb Set bottom margin at current line
+ smgt Set top margin at current line
+ smgbp Set bottom margin at line N
+ smglp Set left margin at column N
+ smgrp Set right margin at column N
+ smgtp Set top margin at line N
+ smglr Set both left and right margins to L and R
+ smgtb Set both top and bottom margins to T and B
+
+ When writing an application that uses these string capabilities, the
+ pairs should be first checked to see if each capability in the pair is
+ set or only one is set:
+
+ o If both smglp and smgrp are set, each is used with a single
+ argument, N, that gives the column number of the left and right
+ margin, respectively.
+
+ o If both smgtp and smgbp are set, each is used to set the top and
+ bottom margin, respectively:
+
+ osmgtp is used with a single argument, N, the line number of the
+ top margin.
+
+ osmgbp is used with two arguments, N and M, that give the line
+ number of the bottom margin, the first counting from the top of
+ the page and the second counting from the bottom. This
+ accommodates the two styles of specifying the bottom margin in
+ different manufacturers' printers.
+
+ When designing a terminfo entry for a printer that has a settable
+ bottom margin, only the first or second argument should be used,
+ depending on the printer. When developing an application that uses
+ smgbp to set the bottom margin, both arguments must be given.
+
+ Conversely, when only one capability in the pair is set:
+
+ o If only one of smglp and smgrp is set, then it is used with two
+ arguments, the column number of the left and right margins, in that
+ order.
+
+ o Likewise, if only one of smgtp and smgbp is set, then it is used
+ with two arguments that give the top and bottom margins, in that
+ order, counting from the top of the page.
+
+ When designing a terminfo entry for a printer that requires setting
+ both left and right or top and bottom margins simultaneously, only
+ one capability in the pairs smglp and smgrp or smgtp and smgbp
+ should be defined, leaving the other unset.
+
+ Except for very old terminal descriptions, e.g., those developed for
+ SVr4, the scheme just described should be considered obsolete. An
+ improved set of capabilities was added late in the SVr4 releases (smglr
+ and smgtb), which explicitly use two parameters for setting the
+ left/right or top/bottom margins.
+
+ When setting margins, the line- and column-values are zero-based.
+
+ The mgc string capability should be defined. Applications such as
+ tabs(1) rely upon this to reset all margins.
@@ -1565,11 +1544,11 @@
given as el1. If the terminal can clear from the current position to
the end of the display, then this should be given as ed. Ed is only
defined from the first column of a line. (Thus, it can be simulated by
- a request to delete a large number of lines, if a true ed is not avail-
- able.)
+ a request to delete a large number of lines, if a true ed is not
+ available.)
-
If the terminal can open a new blank line before the line where the
cursor is, this should be given as il1; this is done only from the
first position of a line. The cursor must then appear on the newly
@@ -1585,53 +1564,55 @@
The cursor position is, alas, undefined after using this command.
It is possible to get the effect of insert or delete line using csr on
- a properly chosen region; the sc and rc (save and restore cursor) com-
- mands may be useful for ensuring that your synthesized insert/delete
+ a properly chosen region; the sc and rc (save and restore cursor)
+ commands may be useful for ensuring that your synthesized insert/delete
string does not move the cursor. (Note that the ncurses(3x) library
does this synthesis automatically, so you need not compose
insert/delete strings for an entry with csr).
- Yet another way to construct insert and delete might be to use a combi-
- nation of index with the memory-lock feature found on some terminals
- (like the HP-700/90 series, which however also has insert/delete).
+ Yet another way to construct insert and delete might be to use a
+ combination of index with the memory-lock feature found on some
+ terminals (like the HP-700/90 series, which however also has
+ insert/delete).
- Inserting lines at the top or bottom of the screen can also be done
- using ri or ind on many terminals without a true insert/delete line,
+ Inserting lines at the top or bottom of the screen can also be done
+ using ri or ind on many terminals without a true insert/delete line,
and is often faster even on terminals with those features.
- The boolean non_dest_scroll_region should be set if each scrolling win-
- dow is effectively a view port on a screen-sized canvas. To test for
- this capability, create a scrolling region in the middle of the screen,
- write something to the bottom line, move the cursor to the top of the
- region, and do ri followed by dl1 or ind. If the data scrolled off the
- bottom of the region by the ri re-appears, then scrolling is non-
- destructive. System V and XSI Curses expect that ind, ri, indn, and
- rin will simulate destructive scrolling; their documentation cautions
- you not to define csr unless this is true. This curses implementation
- is more liberal and will do explicit erases after scrolling if ndsrc is
- defined.
-
- If the terminal has the ability to define a window as part of memory,
- which all commands affect, it should be given as the parameterized
- string wind. The four parameters are the starting and ending lines in
+ The Boolean non_dest_scroll_region should be set if each scrolling
+ window is effectively a view port on a screen-sized canvas. To test
+ for this capability, create a scrolling region in the middle of the
+ screen, write something to the bottom line, move the cursor to the top
+ of the region, and do ri followed by dl1 or ind. If the data scrolled
+ off the bottom of the region by the ri re-appears, then scrolling is
+ non-destructive. System V and XSI Curses expect that ind, ri, indn,
+ and rin will simulate destructive scrolling; their documentation
+ cautions you not to define csr unless this is true. This curses
+ implementation is more liberal and will do explicit erases after
+ scrolling if ndsrc is defined.
+
+ If the terminal has the ability to define a window as part of memory,
+ which all commands affect, it should be given as the parameterized
+ string wind. The four parameters are the starting and ending lines in
memory and the starting and ending columns in memory, in that order.
If the terminal can retain display memory above, then the da capability
- should be given; if display memory can be retained below, then db
- should be given. These indicate that deleting a line or scrolling may
- bring non-blank lines up from below or that scrolling back with ri may
+ should be given; if display memory can be retained below, then db
+ should be given. These indicate that deleting a line or scrolling may
+ bring non-blank lines up from below or that scrolling back with ri may
bring down non-blank lines.
- There are two basic kinds of intelligent terminals with respect to
- insert/delete character which can be described using terminfo. The
- most common insert/delete character operations affect only the charac-
- ters on the current line and shift characters off the end of the line
- rigidly. Other terminals, such as the Concept 100 and the Perkin Elmer
- Owl, make a distinction between typed and untyped blanks on the screen,
- shifting upon an insert or delete only to an untyped blank on the
- screen which is either eliminated, or expanded to two untyped blanks.
+ There are two basic kinds of intelligent terminals with respect to
+ insert/delete character which can be described using terminfo. The
+ most common insert/delete character operations affect only the
+ characters on the current line and shift characters off the end of the
+ line rigidly. Other terminals, such as the Concept 100 and the Perkin
+ Elmer Owl, make a distinction between typed and untyped blanks on the
+ screen, shifting upon an insert or delete only to an untyped blank on
+ the screen which is either eliminated, or expanded to two untyped
+ blanks.
You can determine the kind of terminal you have by clearing the screen
and then typing text separated by cursor motions. Type "abc def"
@@ -1641,9 +1622,9 @@
shift rigidly and characters to fall off the end, then your terminal
does not distinguish between blanks and untyped positions. If the
"abc" shifts over to the "def" which then move together around the end
- of the current line and onto the next as you insert, you have the sec-
- ond type of terminal, and should give the capability in, which stands
- for "insert null".
+ of the current line and onto the next as you insert, you have the
+ second type of terminal, and should give the capability in, which
+ stands for "insert null".
While these are two logically separate attributes (one line versus
multi-line insert mode, and special treatment of untyped spaces) we
@@ -1699,7 +1680,7 @@
without moving the cursor) can be given as ech with one parameter.
-
If your terminal has one or more kinds of display attributes, these can
be represented in a number of different ways. You should choose one
display form as standoutmode, representing a good, high contrast,
@@ -1725,52 +1706,52 @@
If there is a sequence to set arbitrary combinations of modes, this
should be given as sgr (set attributes), taking 9 parameters. Each
- parameter is either 0 or nonzero, as the corresponding attribute is on
- or off. The 9 parameters are, in order: standout, underline, reverse,
- blink, dim, bold, blank, protect, alternate character set. Not all
- modes need be supported by sgr, only those for which corresponding sep-
- arate attribute commands exist.
+ parameter is either zero (0) or nonzero, as the corresponding attribute
+ is on or off. The 9 parameters are, in order: standout, underline,
+ reverse, blink, dim, bold, blank, protect, alternate character set.
+ Not all modes need be supported by sgr, only those for which
+ corresponding separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
- tparmparameterattributeescapesequence
-
- none none \E[0m
- p1 standout \E[0;1;7m
- p2 underline \E[0;4m
- p3 reverse \E[0;7m
- p4 blink \E[0;5m
- p5 dim not available
- p6 bold \E[0;1m
- p7 invis \E[0;8m
- p8 protect not used
- p9 altcharset ^O (off) ^N (on)
+ tparmParameterAttributeEscapeSequence
+ ------------------------------------------------
+ none none \E[0m
+ p1 standout \E[0;1;7m
+ p2 underline \E[0;4m
+ p3 reverse \E[0;7m
+ p4 blink \E[0;5m
+ p5 dim not available
+ p6 bold \E[0;1m
+ p7 invis \E[0;8m
+ p8 protect not used
+ p9 altcharset ^O (off) ^N (on)
We begin each escape sequence by turning off any existing modes, since
there is no quick way to determine whether they are active. Standout
- is set up to be the combination of reverse and bold. The vt220 termi-
- nal has a protect mode, though it is not commonly used in sgr because
- it protects characters on the screen from the host's erasures. The
- altcharset mode also is different in that it is either ^O or ^N,
+ is set up to be the combination of reverse and bold. The vt220
+ terminal has a protect mode, though it is not commonly used in sgr
+ because it protects characters on the screen from the host's erasures.
+ The altcharset mode also is different in that it is either ^O or ^N,
depending on whether it is off or on. If all modes are turned on, the
resulting sequence is \E[0;1;4;5;7;8m^N.
- Some sequences are common to different modes. For example, ;7 is out-
- put when either p1 or p3 is true, that is, if either standout or
+ Some sequences are common to different modes. For example, ;7 is
+ output when either p1 or p3 is true, that is, if either standout or
reverse modes are turned on.
Writing out the above sequences, along with their dependencies yields
- sequencewhentooutputterminfotranslation
-
- \E[0 always \E[0
- ;1 if p1 or p6 %?%p1%p6%|%t;1%;
- ;4 if p2 %?%p2%|%t;4%;
- ;5 if p4 %?%p4%|%t;5%;
- ;7 if p1 or p3 %?%p1%p3%|%t;7%;
- ;8 if p7 %?%p7%|%t;8%;
- m always m
- ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
+ SequenceWhentoOutputterminfoTranslation
+ ----------------------------------------------------
+ \E[0 always \E[0
+ ;1 if p1 or p6 %?%p1%p6%|%t;1%;
+ ;4 if p2 %?%p2%|%t;4%;
+ ;5 if p4 %?%p4%|%t;5%;
+ ;7 if p1 or p3 %?%p1%p3%|%t;7%;
+ ;8 if p7 %?%p7%|%t;8%;
+ m always m
+ ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
Putting this all together into the sgr sequence gives:
@@ -1778,19 +1759,19 @@
%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
Remember that if you specify sgr, you must also specify sgr0. Also,
- some implementations rely on sgr being given if sgr0 is, Not all ter-
- minfo entries necessarily have an sgr string, however. Many terminfo
- entries are derived from termcap entries which have no sgr string. The
- only drawback to adding an sgr string is that termcap also assumes that
- sgr0 does not exit alternate character set mode.
-
- Terminals with the "magic cookie" glitch (xmc) deposit special "cook-
- ies" when they receive mode-setting sequences, which affect the display
- algorithm rather than having extra bits for each character. Some ter-
- minals, such as the HP 2621, automatically leave standout mode when
- they move to a new line or the cursor is addressed. Programs using
- standout mode should exit standout mode before moving the cursor or
- sending a newline, unless the msgr capability, asserting that it is
+ some implementations rely on sgr being given if sgr0 is, Not all
+ terminfo entries necessarily have an sgr string, however. Many
+ terminfo entries are derived from termcap entries which have no sgr
+ string. The only drawback to adding an sgr string is that termcap also
+ assumes that sgr0 does not exit alternate character set mode.
+
+ Terminals with the "magic cookie" glitch (xmc) deposit special
+ "cookies" when they receive mode-setting sequences, which affect the
+ display algorithm rather than having extra bits for each character.
+ Some terminals, such as the HP 2621, automatically leave standout mode
+ when they move to a new line or the cursor is addressed. Programs
+ using standout mode should exit standout mode before moving the cursor
+ or sending a newline, unless the msgr capability, asserting that it is
safe to move in standout mode, is present.
If the terminal has a way of flashing the screen to indicate an error
@@ -1817,8 +1798,8 @@
pressed, this information can be given. Note that it is not possible
to handle terminals where the keypad only works in local (this applies,
for example, to the unshifted HP 2621 keys). If the keypad can be set
- to transmit or not transmit, give these codes as smkx and rmkx. Other-
- wise the keypad is assumed to always transmit.
+ to transmit or not transmit, give these codes as smkx and rmkx.
+ Otherwise the keypad is assumed to always transmit.
The codes sent by the left arrow, right arrow, up arrow, down arrow,
and home keys can be given as kcub1,kcuf1,kcuu1,kcud1, and khome
@@ -1880,8 +1861,8 @@
The capabilities nlab, lw and lh define the number of programmable
screen labels and their width and height. If there are commands to
- turn the labels on and off, give them in smln and rmln. smln is nor-
- mally output after one or more pln sequences to make sure that the
+ turn the labels on and off, give them in smln and rmln. smln is
+ normally output after one or more pln sequences to make sure that the
change becomes visible.
@@ -1913,8 +1894,8 @@
ois1, is2, and is3, initialization strings for the terminal,
- oiprog, the path name of a program to be run to initialize the ter-
- minal,
+ oiprog, the path name of a program to be run to initialize the
+ terminal,
o and if, the name of a file containing long initialization strings.
@@ -1962,8 +1943,8 @@
The reset program writes strings including iprog, etc., in the same
order as the init program, using rs1, etc., instead of is1, etc. If
any of rs1, rs2, rs3, or rf reset capability strings are missing, the
- reset program falls back upon the corresponding initialization capabil-
- ity string.
+ reset program falls back upon the corresponding initialization
+ capability string.
If there are commands to set and clear tab stops, they can be given as
tbc (clear all tab stops) and hts (set a tab stop in the current column
@@ -1974,8 +1955,8 @@
command, although the two programs (tput and reset) provide different
command-line options.
- In practice, these terminfo capabilities are not often used in initial-
- ization of tabs (though they are required for the tabs program):
+ In practice, these terminfo capabilities are not often used in
+ initialization of tabs (though they are required for the tabs program):
o Almost all hardware terminals (at least those which supported tabs)
initialized those to every eight columns:
@@ -1983,9 +1964,9 @@
The only exception was the AT&T 2300 series, which set tabs to
every five columns.
- o In particular, developers of the hardware terminals which are com-
- monly used as models for modern terminal emulators provided docu-
- mentation demonstrating that eight columns were the standard.
+ o In particular, developers of the hardware terminals which are
+ commonly used as models for modern terminal emulators provided
+ documentation demonstrating that eight columns were the standard.
o Because of this, the terminal initialization programs tput and tset
use the tbc (clear_all_tabs) and hts (set_tab) capabilities
@@ -1996,16 +1977,16 @@
Many older and slower terminals do not support either XON/XOFF or DTR
handshaking, including hard copy terminals and some very archaic CRTs
- (including, for example, DEC VT100s). These may require padding char-
- acters after certain cursor motions and screen changes.
+ (including, for example, DEC VT100s). These may require padding
+ characters after certain cursor motions and screen changes.
If the terminal uses xon/xoff handshaking for flow control (that is, it
automatically emits ^S back to the host when its input buffers are
close to full), set xon. This capability suppresses the emission of
- padding. You can also set it for memory-mapped console devices effec-
- tively that do not have a speed limit. Padding information should
- still be included so that routines can make better decisions about rel-
- ative costs, but actual pad characters will not be transmitted.
+ padding. You can also set it for memory-mapped console devices
+ effectively that do not have a speed limit. Padding information should
+ still be included so that routines can make better decisions about
+ relative costs, but actual pad characters will not be transmitted.
If pb (padding baud rate) is given, padding is suppressed at baud rates
below the value of pb. If the entry has no padding baud rate, then
@@ -2029,10 +2010,10 @@
Some terminals with status lines need special sequences to access the
status line. These may be expressed as a string with single parameter
tsl which takes the cursor to a given zero-origin column on the status
- line. The capability fsl must return to the main-screen cursor posi-
- tions before the last tsl. You may need to embed the string values of
- sc (save cursor) and rc (restore cursor) in tsl and fsl to accomplish
- this.
+ line. The capability fsl must return to the main-screen cursor
+ positions before the last tsl. You may need to embed the string values
+ of sc (save cursor) and rc (restore cursor) in tsl and fsl to
+ accomplish this.
The status line is normally assumed to be the same width as the width
of the terminal. If this is untrue, you can specify it with the
@@ -2040,55 +2021,56 @@
A command to erase or blank the status line may be specified as dsl.
- The boolean capability eslok specifies that escape sequences, tabs,
+ The Boolean capability eslok specifies that escape sequences, tabs,
etc., work ordinarily in the status line.
- The ncurses implementation does not yet use any of these capabilities.
+ The ncurses implementation does not yet use any of these capabilities.
They are documented here in case they ever become important.
Many terminals have alternate character sets useful for forms-drawing.
- Terminfo and curses have built-in support for most of the drawing char-
- acters supported by the VT100, with some characters from the AT&T
+ Terminfo and curses have built-in support for most of the drawing
+ characters supported by the VT100, with some characters from the AT&T
4410v1 added. This alternate character set may be specified by the
acsc capability.
- GlyphACSAsciiacscacsc
- NameNameDefaultCharValue
- --------------------------------------------------------------------
- arrow pointing right ACS_RARROW > + 0x2b
- arrow pointing left ACS_LARROW < , 0x2c
- arrow pointing up ACS_UARROW ^ - 0x2d
- arrow pointing down ACS_DARROW v . 0x2e
- solid square block ACS_BLOCK # 0 0x30
- diamond ACS_DIAMOND + ` 0x60
- checker board (stipple) ACS_CKBOARD : a 0x61
- degree symbol ACS_DEGREE \ f 0x66
- plus/minus ACS_PLMINUS # g 0x67
- board of squares ACS_BOARD # h 0x68
- lantern symbol ACS_LANTERN # i 0x69
- lower right corner ACS_LRCORNER + j 0x6a
- upper right corner ACS_URCORNER + k 0x6b
- upper left corner ACS_ULCORNER + l 0x6c
- lower left corner ACS_LLCORNER + m 0x6d
- large plus or crossover ACS_PLUS + n 0x6e
- scan line 1 ACS_S1 ~ o 0x6f
- scan line 3 ACS_S3 - p 0x70
- horizontal line ACS_HLINE - q 0x71
- scan line 7 ACS_S7 - r 0x72
- scan line 9 ACS_S9 _ s 0x73
- tee pointing right ACS_LTEE + t 0x74
- tee pointing left ACS_RTEE + u 0x75
- tee pointing up ACS_BTEE + v 0x76
- tee pointing down ACS_TTEE + w 0x77
- vertical line ACS_VLINE | x 0x78
- less-than-or-equal-to ACS_LEQUAL < y 0x79
- greater-than-or-equal-to ACS_GEQUAL > z 0x7a
- greek pi ACS_PI * { 0x7b
- not-equal ACS_NEQUAL ! | 0x7c
- UK pound sign ACS_STERLING f } 0x7d
- bullet ACS_BULLET o ~ 0x7e
+ acsc
+ ACSNameValueSymbolASCIIFallback/GlyphName
+ ------------------------------------------------------------------------
+ ACS_RARROW 0x2b + > arrow pointing right
+ ACS_LARROW 0x2c , < arrow pointing left
+ ACS_UARROW 0x2d - ^ arrow pointing up
+ ACS_DARROW 0x2e . v arrow pointing down
+ ACS_BLOCK 0x30 0 # solid square block
+ ACS_DIAMOND 0x60 ` + diamond
+ ACS_CKBOARD 0x61 a : checker board (stipple)
+ ACS_DEGREE 0x66 f \ degree symbol
+ ACS_PLMINUS 0x67 g # plus/minus
+ ACS_BOARD 0x68 h # board of squares
+ ACS_LANTERN 0x69 i # lantern symbol
+ ACS_LRCORNER 0x6a j + lower right corner
+
+ ACS_URCORNER 0x6b k + upper right corner
+ ACS_ULCORNER 0x6c l + upper left corner
+ ACS_LLCORNER 0x6d m + lower left corner
+ ACS_PLUS 0x6e n + large plus or crossover
+ ACS_S1 0x6f o ~ scan line 1
+ ACS_S3 0x70 p - scan line 3
+ ACS_HLINE 0x71 q - horizontal line
+ ACS_S7 0x72 r - scan line 7
+ ACS_S9 0x73 s _ scan line 9
+ ACS_LTEE 0x74 t + tee pointing right
+ ACS_RTEE 0x75 u + tee pointing left
+ ACS_BTEE 0x76 v + tee pointing up
+ ACS_TTEE 0x77 w + tee pointing down
+ ACS_VLINE 0x78 x | vertical line
+ ACS_LEQUAL 0x79 y < less-than-or-equal-to
+ ACS_GEQUAL 0x7a z > greater-than-or-equal-to
+ ACS_PI 0x7b { * greek pi
+ ACS_NEQUAL 0x7c | ! not-equal
+ ACS_STERLING 0x7d } f UK pound sign
+ ACS_BULLET 0x7e ~ o bullet
A few notes apply to the table itself:
@@ -2098,8 +2080,8 @@
o The DEC VT100 implemented graphics using the alternate character
set feature, temporarily switching modes and sending characters in
- the range 0x60 (96) to 0x7e (126) (the acscValue column in the ta-
- ble).
+ the range 0x60 (96) to 0x7e (126) (the acscValue column in the
+ table).
o The AT&T terminal added graphics characters outside that range.
@@ -2126,121 +2108,126 @@
o Tektronix-like terminals have a predefined set of N colors (where N
is usually 8), and can set character-cell foreground and background
- characters independently, mixing them into N * N color-pairs.
+ characters independently, mixing them into N * N color pairs.
- o On HP-like terminals, the user must set each color pair up sepa-
- rately (foreground and background are not independently settable).
- Up to M color-pairs may be set up from 2*M different colors. ANSI-
- compatible terminals are Tektronix-like.
+ o On HP-like terminals, the user must set each color pair up
+ separately (foreground and background are not independently
+ settable). Up to M color pairs may be set up from 2*M different
+ colors. ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color method. The
numeric capabilities colors and pairs specify the maximum numbers of
- colors and color-pairs that can be displayed simultaneously. The op
+ colors and color pairs that can be displayed simultaneously. The op
(original pair) string resets foreground and background colors to their
default values for the terminal. The oc string resets all colors or
- color-pairs to their default values for the terminal. Some terminals
- (including many PC terminal emulators) erase screen areas with the cur-
- rent background color rather than the power-up default background;
- these should have the boolean capability bce.
-
- While the curses library works with colorpairs (reflecting the inabil-
- ity of some devices to set foreground and background colors indepen-
- dently), there are separate capabilities for setting these features:
-
- o To change the current foreground or background color on a Tek-
- tronix-type terminal, use setaf (set ANSI foreground) and setab
- (set ANSI background) or setf (set foreground) and setb (set back-
- ground). These take one parameter, the color number. The SVr4
- documentation describes only setaf/setab; the XPG4 draft says that
- "If the terminal supports ANSI escape sequences to set background
- and foreground, they should be coded as setaf and setab, respec-
- tively.
-
- o If the terminal supports other escape sequences to set background
- and foreground, they should be coded as setf and setb, respec-
- tively. The vidputs and the refresh(3x) functions use the setaf
- and setab capabilities if they are defined.
-
- The setaf/setab and setf/setb capabilities take a single numeric argu-
- ment each. Argument values 0-7 of setaf/setab are portably defined as
- follows (the middle column is the symbolic #define available in the
- header for the curses or ncurses libraries). The terminal hardware is
- free to map these as it likes, but the RGB values indicate normal loca-
- tions in color space.
-
- Color#defineValueRGB
- black COLOR_BLACK 0 0, 0, 0
- red COLOR_RED 1 max,0,0
- green COLOR_GREEN 2 0,max,0
- yellow COLOR_YELLOW 3 max,max,0
- blue COLOR_BLUE 4 0,0,max
- magenta COLOR_MAGENTA 5 max,0,max
- cyan COLOR_CYAN 6 0,max,max
- white COLOR_WHITE 7 max,max,max
+ color pairs to their default values for the terminal. Some terminals
+ (including many PC terminal emulators) erase screen areas with the
+ current background color rather than the power-up default background;
+ these should have the Boolean capability bce.
+
+ While the curses library works with colorpairs (reflecting the
+ inability of some devices to set foreground and background colors
+ independently), there are separate capabilities for setting these
+ features:
+
+ o To change the current foreground or background color on a
+ Tektronix-type terminal, use setaf (set ANSI foreground) and setab
+ (set ANSI background) or setf (set foreground) and setb (set
+ background). These take one parameter, the color number. The SVr4
+ documentation describes only setaf/setab; the XPG4 draft says that
+ "If the terminal supports ANSI escape sequences to set background
+ and foreground, they should be coded as setaf and setab,
+ respectively.
+
+ o If the terminal supports other escape sequences to set background
+ and foreground, they should be coded as setf and setb,
+ respectively. The vidputs and the refresh(3x) functions use the
+ setaf and setab capabilities if they are defined.
+
+ The setaf/setab and setf/setb capabilities take a single numeric
+ argument each. Argument values 0-7 of setaf/setab are portably defined
+ as follows (the middle column is the symbolic #define available in the
+ header for the curses or ncurses libraries). The terminal hardware is
+ free to map these as it likes, but the RGB values indicate normal
+ locations in color space.
+
+ Color#defineValueRGB
+ ------------------------------------------------
+ black COLOR_BLACK 0 0, 0, 0
+ red COLOR_RED 1 max, 0, 0
+ green COLOR_GREEN 2 0, max, 0
+ yellow COLOR_YELLOW 3 max, max, 0
+ blue COLOR_BLUE 4 0, 0, max
+ magenta COLOR_MAGENTA 5 max, 0, max
+ cyan COLOR_CYAN 6 0, max, max
+ white COLOR_WHITE 7 max, max, max
The argument values of setf/setb historically correspond to a different
mapping, i.e.,
- Color#defineValueRGB
- black COLOR_BLACK 0 0, 0, 0
- blue COLOR_BLUE 1 0,0,max
- green COLOR_GREEN 2 0,max,0
- cyan COLOR_CYAN 3 0,max,max
- red COLOR_RED 4 max,0,0
- magenta COLOR_MAGENTA 5 max,0,max
- yellow COLOR_YELLOW 6 max,max,0
- white COLOR_WHITE 7 max,max,max
-
- It is important to not confuse the two sets of color capabilities; oth-
- erwise red/blue will be interchanged on the display.
-
- On an HP-like terminal, use scp with a color-pair number parameter to
+ Color#defineValueRGB
+ ------------------------------------------------
+ black COLOR_BLACK 0 0, 0, 0
+ blue COLOR_BLUE 1 0, 0, max
+ green COLOR_GREEN 2 0, max, 0
+ cyan COLOR_CYAN 3 0, max, max
+ red COLOR_RED 4 max, 0, 0
+ magenta COLOR_MAGENTA 5 max, 0, max
+ yellow COLOR_YELLOW 6 max, max, 0
+ white COLOR_WHITE 7 max, max, max
+
+ It is important to not confuse the two sets of color capabilities;
+ otherwise red/blue will be interchanged on the display.
+
+ On an HP-like terminal, use scp with a color pair number parameter to
set which color pair is current.
Some terminals allow the colorvalues to be modified:
- o On a Tektronix-like terminal, the capability ccc may be present to
- indicate that colors can be modified. If so, the initc capability
+ o On a Tektronix-like terminal, the capability ccc may be present to
+ indicate that colors can be modified. If so, the initc capability
will take a color number (0 to colors - 1)and three more parameters
- which describe the color. These three parameters default to being
- interpreted as RGB (Red, Green, Blue) values. If the boolean capa-
- bility hls is present, they are instead as HLS (Hue, Lightness,
+ which describe the color. These three parameters default to being
+ interpreted as RGB (Red, Green, Blue) values. If the Boolean
+ capability hls is present, they are instead as HLS (Hue, Lightness,
Saturation) indices. The ranges are terminal-dependent.
- o On an HP-like terminal, initp may give a capability for changing a
- color-pair value. It will take seven parameters; a color-pair num-
- ber (0 to max_pairs - 1), and two triples describing first back-
- ground and then foreground colors. These parameters must be (Red,
- Green, Blue) or (Hue, Lightness, Saturation) depending on hls.
-
- On some color terminals, colors collide with highlights. You can reg-
- ister these collisions with the ncv capability. This is a bit-mask of
- attributes not to be used when colors are enabled. The correspondence
- with the attributes understood by curses is as follows:
-
- AttributeBitDecimalSetby
- A_STANDOUT 0 1 sgr
- A_UNDERLINE 1 2 sgr
- A_REVERSE 2 4 sgr
- A_BLINK 3 8 sgr
- A_DIM 4 16 sgr
- A_BOLD 5 32 sgr
- A_INVIS 6 64 sgr
- A_PROTECT 7 128 sgr
- A_ALTCHARSET 8 256 sgr
- A_HORIZONTAL 9 512 sgr1
- A_LEFT 10 1024 sgr1
- A_LOW 11 2048 sgr1
- A_RIGHT 12 4096 sgr1
- A_TOP 13 8192 sgr1
- A_VERTICAL 14 16384 sgr1
- A_ITALIC 15 32768 sitm
+ o On an HP-like terminal, initp may give a capability for changing a
+ color pair value. It will take seven parameters; a color pair
+ number (0 to max_pairs - 1), and two triples describing first
+ background and then foreground colors. These parameters must be
+ (Red, Green, Blue) or (Hue, Lightness, Saturation) depending on
+ hls.
+
+ On some color terminals, colors collide with highlights. You can
+ register these collisions with the ncv capability. This is a bit mask
+ of attributes not to be used when colors are enabled. The
+ correspondence with the attributes understood by curses is as follows:
+
+ AttributeBitDecimalSetby
+ --------------------------------------
+ A_STANDOUT 0 1 sgr
+ A_UNDERLINE 1 2 sgr
+ A_REVERSE 2 4 sgr
+ A_BLINK 3 8 sgr
+ A_DIM 4 16 sgr
+ A_BOLD 5 32 sgr
+ A_INVIS 6 64 sgr
+ A_PROTECT 7 128 sgr
+ A_ALTCHARSET 8 256 sgr
+ A_HORIZONTAL 9 512 sgr1
+ A_LEFT 10 1024 sgr1
+ A_LOW 11 2048 sgr1
+ A_RIGHT 12 4096 sgr1
+ A_TOP 13 8192 sgr1
+ A_VERTICAL 14 16384 sgr1
+ A_ITALIC 15 32768 sitm
For example, on many IBM PC consoles, the underline attribute collides
with the foreground color blue and is not available in color mode.
These should have an ncv capability of 2.
- SVr4 curses does nothing with ncv, ncurses recognizes it and optimizes
+ SVr4 curses does nothing with ncv, ncurses recognizes it and optimizes
the output in favor of colors.
@@ -2248,29 +2235,29 @@
If the terminal requires other than a null (zero) character as a pad,
then this can be given as pad. Only the first character of the pad
string is used. If the terminal does not have a pad character, specify
- npc. Note that ncurses implements the termcap-compatible PC variable;
+ npc. Note that ncurses implements the termcap-compatible PC variable;
though the application may set this value to something other than a
- null, ncurses will test npc first and use napms if the terminal has no
+ null, ncurses will test npc first and use napms if the terminal has no
pad character.
If the terminal can move up or down half a line, this can be indicated
- with hu (half-line up) and hd (half-line down). This is primarily use-
- ful for superscripts and subscripts on hard-copy terminals. If a hard-
- copy terminal can eject to the next page (form feed), give this as ff
- (usually control/L).
+ with hu (half-line up) and hd (half-line down). This is primarily
+ useful for superscripts and subscripts on hard-copy terminals. If a
+ hard-copy terminal can eject to the next page (form feed), give this as
+ ff (usually control/L).
If there is a command to repeat a given character a given number of
- times (to save time transmitting a large number of identical charac-
- ters) this can be indicated with the parameterized string rep. The
- first parameter is the character to be repeated and the second is the
- number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is the
- same as "xxxxxxxxxx".
+ times (to save time transmitting a large number of identical
+ characters) this can be indicated with the parameterized string rep.
+ The first parameter is the character to be repeated and the second is
+ the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
+ the same as "xxxxxxxxxx".
If the terminal has a settable command character, such as the TEKTRONIX
4025, this can be indicated with cmdch. A prototype command character
is chosen which is used in all capabilities. This character is given
in the cmdch capability to identify it. The following convention is
- supported on some UNIX systems: The environment is to be searched for a
+ supported on some Unix systems: The environment is to be searched for a
CC variable, and if found, all occurrences of the prototype character
are replaced with the character in the environment variable.
@@ -2292,7 +2279,7 @@
of lm#0 indicates that the number of lines is not fixed, but that there
is still more memory than fits on the screen.
- If the terminal is one of those supported by the UNIX virtual terminal
+ If the terminal is one of those supported by the Unix virtual terminal
protocol, the terminal number can be given as vt.
Media copy strings which control an auxiliary printer connected to the
@@ -2301,13 +2288,13 @@
is on, all text sent to the terminal will be sent to the printer. It
is undefined whether the text is also displayed on the terminal screen
when the printer is on. A variation mc5p takes one parameter, and
- leaves the printer on for as many characters as the value of the param-
- eter, then turns the printer off. The parameter should not exceed 255.
- All text, including mc4, is transparently passed to the printer while
- an mc5p is in effect.
+ leaves the printer on for as many characters as the value of the
+ parameter, then turns the printer off. The parameter should not exceed
+ 255. All text, including mc4, is transparently passed to the printer
+ while an mc5p is in effect.
-
Hazeltine terminals, which do not allow "~" characters to be displayed
should indicate hz.
@@ -2319,11 +2306,11 @@
Teleray terminals, where tabs turn all characters moved over to blanks,
should indicate xt (destructive tabs). Note: the variable indicating
- this is now "dest_tabs_magic_smso"; in older versions, it was tel-
- eray_glitch. This glitch is also taken to mean that it is not possible
- to position the cursor on top of a "magic cookie", that to erase stand-
- out mode it is instead necessary to use delete and insert line. The
- ncurses implementation ignores this glitch.
+ this is now "dest_tabs_magic_smso"; in older versions, it was
+ teleray_glitch. This glitch is also taken to mean that it is not
+ possible to position the cursor on top of a "magic cookie", that to
+ erase standout mode it is instead necessary to use delete and insert
+ line. The ncurses implementation ignores this glitch.
The Beehive Superbee, which is unable to correctly transmit the escape
or control/C characters, has xsb, indicating that the f1 key is used
@@ -2331,15 +2318,15 @@
problem, depending on the ROM.) Note that in older terminfo versions,
this capability was called "beehive_glitch"; it is now "no_esc_ctl_c".
- Other specific terminal problems may be corrected by adding more capa-
- bilities of the form xx.
+ Other specific terminal problems may be corrected by adding more
+ capabilities of the form xx.
Long terminfo entries are unlikely to be a problem; to date, no entry
- has even approached terminfo's 4096-byte string-table maximum. Unfor-
- tunately, the termcap translations are much more strictly limited (to
- 1023 bytes), thus termcap translations of long terminfo entries can
+ has even approached terminfo's 4096-byte string-table maximum.
+ Unfortunately, the termcap translations are much more strictly limited
+ (to 1023 bytes), thus termcap translations of long terminfo entries can
cause problems.
The man pages for 4.3BSD and older versions of tgetent instruct the
@@ -2348,12 +2335,18 @@
safe length for a termcap entry 1k-1 (1023) bytes. Depending on what
the application and the termcap library being used does, and where in
the termcap file the terminal type that tgetent is searching for is,
- several bad things can happen.
+ several bad things can happen:
+
+ o some termcap libraries print a warning message,
+
+ o some exit if they find an entry that's longer than 1023 bytes,
+
+ o some neither exit nor warn, doing nothing useful, and
+
+ o some simply truncate the entries to 1023 bytes.
- Some termcap libraries print a warning message or exit if they find an
- entry that's longer than 1023 bytes; others do not; others truncate the
- entries to 1023 bytes. Some application programs allocate more than
- the recommended 1K for the termcap entry; others do not.
+ Some application programs allocate more than the recommended 1K for the
+ termcap entry; others do not.
Each termcap entry has two important sizes associated with it: before
"tc" expansion, and after "tc" expansion. "tc" is the capability that
@@ -2382,16 +2375,16 @@
the whole termcap file).
Then tgetent will overwrite memory, perhaps its stack, and probably
- core dump the program. Programs like telnet are particularly vulnera-
- ble; modern telnets pass along values like the terminal type automati-
- cally. The results are almost as undesirable with a termcap library,
- like SunOS 4.1.3 and Ultrix 4.4, that prints warning messages when it
- reads an overly long termcap entry. If a termcap library truncates
- long entries, like OSF/1 3.0, it is immune to dying here but will
- return incorrect data for the terminal.
+ core dump the program. Programs like telnet are particularly
+ vulnerable; modern telnets pass along values like the terminal type
+ automatically. The results are almost as undesirable with a termcap
+ library, like SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
+ when it reads an overly long termcap entry. If a termcap library
+ truncates long entries, like OSF/1 3.0, it is immune to dying here but
+ will return incorrect data for the terminal.
The "after tc expansion" length will have a similar effect to the
- above, but only for people who actually set TERM to that terminal type,
+ above, but only for people who actually set TERM to that terminal type,
since tgetent only does "tc" expansion once it is found the terminal
type it was looking for, not while searching.
@@ -2399,99 +2392,102 @@
on various combinations of termcap libraries and applications, a core
dump, warnings, or incorrect operation. If it is too long even before
"tc" expansion, it will have this effect even for users of some other
- terminal types and users whose TERM variable does not have a termcap
+ terminal types and users whose TERM variable does not have a termcap
entry.
- When in -C (translate to termcap) mode, the ncurses implementation of
+ When in -C (translate to termcap) mode, the ncurses implementation of
tic(1m) issues warning messages when the pre-tc length of a termcap
translation is too long. The -c (check) option also checks resolved
(after tc expansion) lengths.
-
- It is not wise to count on portability of binary terminfo entries
- between commercial UNIX versions. The problem is that there are at
- least two versions of terminfo (under HP-UX and AIX) which diverged
- from System V terminfo after SVr1, and have added extension capabili-
- ties to the string table that (in the binary format) collide with Sys-
- tem V and XSI Curses extensions.
+
- Searching for terminal descriptions in $HOME/.terminfo and TER-
- MINFO_DIRS is not supported by older implementations.
+ Searching for terminal descriptions in $HOME/.terminfo and
+ TERMINFO_DIRS is not supported by older implementations.
- Some SVr4 curses implementations, and all previous to SVr4, do not
+ Some SVr4 curses implementations, and all previous to SVr4, do not
interpret the %A and %O operators in parameter strings.
- SVr4/XPG4 do not specify whether msgr licenses movement while in an
- alternate-character-set mode (such modes may, among other things, map
- CR and NL to characters that do not trigger local motions). The
- ncurses implementation ignores msgr in ALTCHARSET mode. This raises
- the possibility that an XPG4 implementation making the opposite inter-
- pretation may need terminfo entries made for ncurses to have msgr
+ SVr4/XPG4 do not specify whether msgr licenses movement while in an
+ alternate-character-set mode (such modes may, among other things, map
+ CR and NL to characters that do not trigger local motions). The
+ ncurses implementation ignores msgr in ALTCHARSET mode. This raises
+ the possibility that an XPG4 implementation making the opposite
+ interpretation may need terminfo entries made for ncurses to have msgr
turned off.
- The ncurses library handles insert-character and insert-character modes
- in a slightly non-standard way to get better update efficiency. See
+ The ncurses library handles insert-character and insert-character modes
+ in a slightly non-standard way to get better update efficiency. See
the Insert/DeleteCharacter subsection above.
- The parameter substitutions for set_clock and display_clock are not
- documented in SVr4 or the XSI Curses standard. They are deduced from
+ The parameter substitutions for set_clock and display_clock are not
+ documented in SVr4 or the XSI Curses standard. They are deduced from
the documentation for the AT&T 505 terminal.
- Be careful assigning the kmous capability. The ncurses library wants
- to interpret it as KEY_MOUSE, for use by terminals and emulators like
- xterm that can return mouse-tracking information in the keyboard-input
+ Be careful assigning the kmous capability. The ncurses library wants
+ to interpret it as KEY_MOUSE, for use by terminals and emulators like
+ xterm that can return mouse-tracking information in the keyboard-input
stream.
- X/Open Curses does not mention italics. Portable applications must
- assume that numeric capabilities are signed 16-bit values. This
- includes the no_color_video (ncv) capability. The 32768 mask value
- used for italics with ncv can be confused with an absent or cancelled
- ncv. If italics should work with colors, then the ncv value must be
+ X/Open Curses does not mention italics. Portable applications must
+ assume that numeric capabilities are signed 16-bit values. This
+ includes the no_color_video (ncv) capability. The 32768 mask value
+ used for italics with ncv can be confused with an absent or cancelled
+ ncv. If italics should work with colors, then the ncv value must be
specified, even if it is zero.
- Different commercial ports of terminfo and curses support different
- subsets of the XSI Curses standard and (in some cases) different exten-
- sion sets. Here is a summary, accurate as of October 1995:
+ Different commercial ports of terminfo and curses support different
+ subsets of XSI Curses and (in some cases) different extensions. Here
+ is a summary, accurate as of October 1995, after which the commercial
+ Unix market contracted and lost diversity.
- oSVR4,Solaris,ncurses -- These support all SVr4 capabilities.
+ o SVr4, Solaris, and ncurses support all SVr4 capabilities.
- oSGI -- Supports the SVr4 set, adds one undocumented extended string
- capability (set_pglen).
+ o IRIX supports the SVr4 set and adds one undocumented extended
+ string capability (set_pglen).
- oSVr1,Ultrix -- These support a restricted subset of terminfo capa-
- bilities. The booleans end with xon_xoff; the numerics with
+ o SVr1 and Ultrix support a restricted subset of terminfo
+ capabilities. The Booleans end with xon_xoff; the numerics with
width_status_line; and the strings with prtr_non.
- oHP/UX -- Supports the SVr1 subset, plus the SVr[234] numerics
+ o HP/UX supports the SVr1 subset, plus the SVr[234] numerics
num_labels, label_height, label_width, plus function keys 11
- through 63, plus plab_norm, label_on, and label_off, plus some
- incompatible extensions in the string table.
+ through 63, plus plab_norm, label_on, and label_off, plus a number
+ of incompatible string table extensions.
- oAIX -- Supports the SVr1 subset, plus function keys 11 through 63,
+ o AIX supports the SVr1 subset, plus function keys 11 through 63,
plus a number of incompatible string table extensions.
- oOSF -- Supports both the SVr4 set and the AIX extensions.
-
-
-
+ Do not count on compiled (binary) terminfo entries being portable
+ between commercial Unix systems. At least two implementations of
+ terminfo (those of HP-UX and AIX) diverged from those of other System V
+ Unices after SVr1, adding extension capabilities to the string table
+ that (in the binary format) collide with subsequent System V and XSI
+ Curses extensions.
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. Based on pcurses
+ Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. Based on pcurses
by Pavel Curtis.
+