1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2011/12/24 22:16:12 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+pp|ansi printer port,
380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The IBM PC alternate character set. Plug this into any Intel console entry.
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386 # ROM graphics for control characters such as the diamond, up- and down-arrow.
387 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
388 # will work with any Intel console, they all seem to have inherited \E[11m
389 # from the ANSI.SYS de-facto standard.
390 klone+acs|alternate character set for ansi.sys displays,
391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392 rmacs=\E[10m, smacs=\E[11m,
394 # Highlight controls corresponding to the ANSI.SYS standard. Most
395 # console drivers for Intel boxes obey these. Makes the same assumption
396 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
397 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398 klone+sgr|attribute control for ansi.sys displays,
399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400 rmso=\E[m, rmul=\E[m,
401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
405 # Most Intel boxes do not treat "invis" (invisible) text.
406 klone+sgr8|attribute control for ansi.sys displays,
408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
411 # Highlight controls corresponding to the ANSI.SYS standard. *All*
412 # console drivers for Intel boxes obey these. Does not assume \E[11m will
413 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414 # diamond and arrow characters under curses.
415 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
422 # KOI8-R (RFC1489) acs (alternate character set)
423 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426 rmacs=\E[10m, smacs=\E[11m,
428 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
429 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
430 # but equivalent strings that don't rely on that coincidence:
431 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434 # They match a subset of ECMA-48.
435 klone+color|color control for ansi.sys and ISO6429-compatible displays,
436 colors#8, ncv#3, pairs#64,
437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
439 # This is better than klone+color, it doesn't assume white-on-black as the
440 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
441 ecma+color|color control for ECMA-48-compatible terminals,
443 colors#8, ncv#3, pairs#64,
444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
446 # Attribute control for ECMA-48-compatible terminals
447 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
450 # For comparison, here are all the capabilities implied by the Intel
451 # Binary Compatibility Standard (level 2) that fit within terminfo.
452 # For more detail on this rather pathetic standard, see the comments
453 # near the end of this file.
454 ibcs2|Intel Binary Compatibility Standard prescriptions,
455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
456 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
457 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
458 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
459 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
460 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
461 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
463 #### ANSI/ECMA-48 terminals and terminal emulators
465 # See near the end of this file for details on ANSI conformance.
466 # Don't mess with these entries! Lots of other entries depend on them!
468 # This section lists entries in a least-capable to most-capable order.
469 # if you're in doubt about what `ANSI' matches yours, try them in that
470 # order and back off from the first that breaks.
472 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
473 # and more than one page of memory. It uses local motions instead of
474 # direct cursor addressing, and makes almost no assumptions. It does
475 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
476 ansi-mr|mem rel cup ansi,
478 cols#80, lines#24, use=vanilla, use=ansi+erase,
481 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
482 # beware of screen size problems and memory relative cursor addressing.
483 ansi-mini|any ansi terminal with pessimistic assumptions,
485 cols#80, lines#24, use=vanilla, use=ansi+cup,
488 # ansi-mtabs adds relative addressing and minimal tab support
489 ansi-mtabs|any ansi terminal with pessimistic assumptions,
491 ht=^I, use=ansi+local1, use=ansi-mini,
493 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
495 # The following is an entry for the full ANSI 3.64 (1977). It lacks
496 # padding, but most terminals using the standard are "fast" enough
497 # not to require any -- even at 9600 bps. If you encounter problems,
498 # try including the padding specifications.
500 # Note: the :as: and :ae: specifications are not implemented here, for
501 # the available termcap documentation does not make clear WHICH alternate
502 # character set to specify. ANSI 3.64 seems to make allowances for several.
503 # Please make the appropriate adjustments to fit your needs -- that is
504 # if you will be using alternate character sets.
506 # There are very few terminals running the full ANSI 3.64 standard,
507 # so I could only test this entry on one verified terminal (Visual 102).
508 # I would appreciate the results on other terminals sent to me.
510 # Please report comments, changes, and problems to:
512 # U.S. MAIL: Hugh Hansard
515 # Atlanta, GA. 30322.
517 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
519 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
520 ansi77|ansi 3.64 standard 1977 version,
522 cols#80, it#8, lines#24,
523 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
524 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
525 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
526 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
527 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
528 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
529 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
530 smso=\E[7m, smul=\E[4m,
532 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
533 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
534 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
535 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
536 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
537 # to confuse many emulators. On the other hand, we can count on these programs
538 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
539 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
540 # ANSI.SYS influence.
541 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
542 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
544 cols#80, it#8, lines#24,
545 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
546 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
547 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
548 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
549 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
551 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
552 lines#25, use=pcansi-m,
553 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
554 lines#33, use=pcansi-m,
555 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
556 lines#43, use=pcansi-m,
557 # The color versions. All PC emulators do color...
558 pcansi|ibm-pc terminal programs claiming to be ansi,
559 use=klone+color, use=pcansi-m,
560 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
561 lines#25, use=pcansi,
562 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
563 lines#33, use=pcansi,
564 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
565 lines#43, use=pcansi,
567 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
568 # If you want pound signs rather than dollars, replace `B' with `A'
569 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
570 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
571 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
573 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
574 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
575 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
576 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
577 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
578 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
579 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
580 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
581 vpa=\E[%i%p1%dd, use=pcansi-m,
583 ansi+enq|ncurses extension for ANSI ENQ,
584 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
587 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
588 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
589 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
590 ansi|ansi/pc-term compatible with color,
591 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
593 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
594 # all the normal ANSI stuff with no extensions. It assumes
595 # insert/delete line/char is there, so it won't work with
596 # vt100 clones. It assumes video attributes for bold, blink,
597 # underline, and reverse, which won't matter much if the terminal
598 # can't do some of those. Padding is assumed to be zero, which
599 # shouldn't hurt since xon/xoff is assumed.
600 ansi-generic|generic ansi standard terminal,
602 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
603 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
604 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
605 use=ansi+sgrbold, use=ansi+arrows,
607 #### DOS ANSI.SYS variants
609 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
610 # documentation (except for the keyboard key reassignment feature, which
611 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
612 # though undocumented. The <pfkey> capability is untested but should work for
613 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
614 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
615 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
616 OTbs, am, mir, msgr, xon,
618 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
620 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
621 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
622 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
623 u7=\E[6n, use=klone+color, use=klone+sgr8,
625 # Keypad: Home=\0G Up=\0H PrPag=\0I
626 # ka1,kh kcuu1 kpp,ka3
628 # Left=\0K 5=\0L Right=\0M
631 # End=\0O Down=\0P NxPag=\0Q
632 # kc1,kend kcud1 kc3,knp
637 # On keyboard with 12 function keys,
638 # shifted f-keys: F13-F24
639 # control f-keys: F25-F36
640 # alt f-keys: F37-F48
641 # The shift/control/alt keys do not modify each other, but alt overrides both,
642 # and control overrides shift.
644 # <pfkey> capability for F1-F48 -TD
645 ansi.sys|ANSI.SYS 3.1 and later versions,
646 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
647 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
648 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
649 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
650 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
651 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
652 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
653 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
654 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
655 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
656 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
657 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
658 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
662 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
663 # This should only be used when the terminal emulator cannot redefine the keys.
664 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
665 # definitions must be restored. If the terminal emulator is quit while in vi
666 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
667 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
668 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
669 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
670 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
671 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
672 # Consequently the End keypad key could not be set (it is relatively safe and
673 # actually useful because it sends ^@ O, which beeps and opens a line above).
674 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
675 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
676 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
677 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
680 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
681 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
682 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
683 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
686 # See ansi.sysk and nansi.sys above.
687 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
688 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
689 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
692 #### ANSI console types
695 # Atari ST terminals.
696 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
698 tw52|tw52-color|Toswin window manager with color,
700 colors#16, pairs#256,
701 oc=\Eb?\Ec0, op=\Eb?\Ec0,
702 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
703 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
704 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
705 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
707 tw52-m|Toswin window manager monochrome,
710 bold=\Eya, dch1=\Ea, dim=\EyB,
711 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
712 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
713 smso=\EyQ, smul=\EyH, use=at-m,
714 tt52|Atari TT medium and high resolution,
715 lines#30, use=at-color,
716 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
718 colors#16, pairs#256,
719 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
720 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
721 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
722 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
723 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
725 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
727 cols#80, it#8, lines#24,
728 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
729 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
730 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
731 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
732 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
733 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
734 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
735 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
736 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
737 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
738 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
739 tw100|toswin vt100 window mgr,
741 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
742 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
743 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
744 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
746 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
747 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
748 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
749 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
750 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
751 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
752 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
753 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
754 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
755 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
756 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
757 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
758 rmso=\E[m, rmul=\E[m,
759 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
761 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
762 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
763 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
764 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
765 # The entries for stv52 and stv52pc probably need a revision.
766 stv52|MiNT virtual console,
768 cols#80, it#8, lines#30,
769 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
770 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
772 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
773 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
774 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
775 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
776 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
777 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
778 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
779 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
780 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
781 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
782 stv52pc|MiNT virtual console with PC charset,
784 cols#80, it#8, lines#30,
785 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
786 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
787 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
788 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
789 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
790 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
791 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
792 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
793 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
794 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
795 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
796 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
797 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
803 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
806 cols#80, it#8, lines#25,
807 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
808 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
809 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
810 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
811 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
812 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
813 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
815 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
817 # MiNT VT52 emulation. 80 columns, 25 rows.
818 # MiNT is Now TOS, the operating system which comes with all Ataris now
819 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
820 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
821 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
822 st52-old|Atari ST with VT52 emulation,
825 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
826 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
827 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
828 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
829 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
830 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
831 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
832 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
833 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
838 # BeOS entry for Terminal program Seems to be almost ANSI
839 beterm|BeOS Terminal,
840 am, eo, mir, msgr, xenl, xon,
841 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
842 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
843 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
844 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
845 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
846 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
847 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
848 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
849 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
850 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
851 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
852 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
853 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
854 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
855 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
856 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
857 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
858 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
859 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
860 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
866 # This entry is good for the 1.2.13 or later version of the Linux console.
868 # ***************************************************************************
871 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
872 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
873 # * character. Here are the keymap replacement lines that will set this up: *
875 # keycode 15 = Tab Tab
876 # alt keycode 15 = Meta_Tab
877 # shift keycode 15 = F26
878 # string F26 ="\033[Z"
880 # * This has to use a key slot which is unfortunate (any unused one will *
881 # * do, F26 is the higher-numbered one). The change ought to be built *
882 # * into the kernel tables. *
884 # ***************************************************************************
886 # All linux kernels since 1.2.13 (at least) set the screen size
887 # themselves; this entry assumes that capability.
889 linux-basic|linux console,
890 am, bce, eo, mir, msgr, xenl, xon,
892 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
893 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
894 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
895 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
896 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
897 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
898 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
899 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
900 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
901 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
902 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
903 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
904 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
905 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
906 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
907 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
908 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
909 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
910 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
911 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
912 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
915 linux-m|Linux console no color,
917 setab@, setaf@, setb@, setf@, use=linux,
919 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
920 # and it matters, turn off <ccc>. The %02x escape used to implement this is
921 # not supposedly back-portable to older SV curses (although it has worked fine
922 # on Solaris for several years) and not supported in ncurses versions before
924 linux-c-nc|linux console with color-change,
926 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
927 oc=\E]R, use=linux-basic,
928 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
929 linux-c|linux console 1.3.6+ for older ncurses,
931 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
932 oc=\E]R, use=linux-basic,
934 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
935 # get a block cursor for cvvis.
936 # reported by Frank Heckenbach <frank@g-n-u.de>.
937 linux2.2|linux 2.2.x console,
938 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
939 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
941 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
942 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
943 # Using SI/SO has the drawback that it confuses screen. SCS would work.
944 # However, SCS is buggy (see comment in Debian #515609) -TD
945 linux2.6|linux 2.6.x console,
947 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
948 sgr0=\E[m\017, smacs=^N, use=linux2.2,
950 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
951 linux3.0|linux 3.0 kernels,
952 E3=\E[3;J, use=linux2.6,
954 # This is Linux console for ncurses.
958 # Subject: linux 2.6.26 vt back_color_erase
959 # Changes to the Linux console driver broke bce model as reported in
960 # https://bugzilla.novell.com/show_bug.cgi?id=418613
962 # http://lkml.org/lkml/2008/4/26/305
963 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
964 linux2.6.26|linux console w/o bce,
967 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
968 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
969 ich@, ich1@, use=linux,
971 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
972 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
973 linux-koi8|linux with koi8 alternate character set,
974 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
975 use=linux, use=klone+koi8acs,
977 # Another entry for KOI8-r with Qing Long's acsc.
978 # (which one better complies with the standard?)
979 linux-koi8r|linux with koi8-r alternate character set,
980 use=linux, use=klone+koi8acs,
982 # Entry for the latin1 and latin2 fonts
983 linux-lat|linux with latin1 or latin2 alternate character set,
984 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
987 # This uses graphics from VT codeset instead of from cp437.
988 # reason: cp437 (aka "straight to font") is not functional under luit.
989 # from: Andrey V Lukyanov <land@long.yar.ru>.
990 linux-vt|linux console using VT codes for graphics,
991 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
992 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
995 # This is based on the Linux console (relies on the console to perform some
996 # of the functionality), but does not recognize as many control sequences.
997 # The program comes bundled with an old (circa 1998) copy of the Linux
998 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
999 # \E* move cursor to home, as as \E[H
1001 # \EE move cursor to beginning of row
1002 # \E[y,xf same as \E[y,xH
1004 # Note: The status-line support is buggy (dsl does not work).
1005 kon|kon2|jfbterm|Kanji ON Linux console,
1007 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1008 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1011 # 16-color linux console entry; this works with a 256-character
1012 # console font but bright background colors turn into dim ones when
1013 # you use a 512-character console font. This uses bold for bright
1014 # foreground colors and blink for bright background colors.
1015 linux-16color|linux console with 16 colors,
1016 colors#16, ncv#54, pairs#256,
1017 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
1018 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
1021 # bterm (bogl 0.1.18)
1022 # Implementation is in bogl-term.c
1023 # Key capabilities from linux terminfo entry
1026 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1027 # bterm does not support sgr, since it only processes one parameter -TD
1028 bterm|bogl virtual terminal,
1030 colors#8, cols#80, lines#24, pairs#64,
1031 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1032 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1033 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1034 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1035 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1036 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1037 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1038 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1039 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1040 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1041 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1042 op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1043 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1044 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1049 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1052 cols#80, it#8, lines#25,
1053 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1054 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1055 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1056 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1057 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1058 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1059 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1060 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1061 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1062 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1063 smso=\E[7m, smul=\E[4m,
1064 mach-bold|Mach Console with bold instead of underline,
1065 rmul=\E[0m, smul=\E[1m, use=mach,
1066 mach-color|Mach Console with ANSI color,
1068 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1069 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1071 # From: Marcus Brinkmann
1072 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1074 # Comments in the original are summarized here:
1076 # hurd uses 8-bit characters (km).
1078 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1080 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1081 # have the eat_newline_glitch. It doesn't support setting or removing tab
1084 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1085 # one byte instead three.
1087 # <ich1> is not included because hurd has insert mode.
1089 # hurd doesn't use ^J for scrolling, because this could put things into the
1090 # scrollback buffer.
1092 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1093 # This is a GNU extension.
1095 # The original has commented-out ncv, but is restored here.
1097 # Reading the source, RIS resets cnorm, but not xmous.
1098 hurd|The GNU Hurd console server,
1099 am, bce, bw, eo, km, mir, msgr, xon,
1100 colors#8, it#8, ncv#18, pairs#64,
1101 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1102 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1103 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1104 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1105 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1106 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1107 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1108 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1109 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1110 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1111 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1112 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1113 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1114 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1115 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1116 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1117 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1118 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1119 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1120 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1121 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1122 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1123 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1124 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1125 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1131 # OSF/1 1.1 Snapshot 2
1132 pmcons|pmconsole|PMAX console,
1135 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
1136 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1137 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1139 # SCO console and SOS-Syscons console for 386bsd
1140 # (scoansi: had unknown capabilities
1141 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1142 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1143 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1144 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1145 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1146 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1147 # on the <smacs>=\E[12m -- esr)
1149 # klone+sgr-dumb is an error since the acsc does not match -TD
1151 # In this description based on SCO's keyboard(HW) manpage list of default
1152 # function key values:
1153 # F13-F24 are shifted F1-F12
1154 # F25-F36 are control F1-F12
1155 # F37-F48 are shift+control F1-F12
1157 # hpa/vpa work in the console, but not in scoterm:
1161 # SCO's terminfo uses
1164 # which do not work (console or scoterm).
1166 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1167 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1168 OTbs, am, bce, eo, xon,
1169 colors#8, cols#80, it#8, lines#25, pairs#64,
1170 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1171 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1172 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1173 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1174 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1175 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1176 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1177 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1178 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1179 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1180 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1181 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1182 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1183 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1184 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1185 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1186 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1187 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1188 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1189 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1190 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1191 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1192 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1193 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1194 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1195 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1196 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1198 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1199 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1200 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1201 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
1202 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1203 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1204 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1205 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1206 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1208 # make this easy to change...
1209 scoansi|SCO Extended ANSI standard crt,
1212 # This actually describes the generic SVr4 display driver for Intel boxes.
1213 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
1214 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1215 att6386|at386|386at|AT&T WGS 6386 console,
1217 cols#80, it#8, lines#25,
1218 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1219 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1220 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1221 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1222 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1223 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1224 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1225 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1226 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1227 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1228 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1229 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1230 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1231 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1232 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1233 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1235 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1236 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1237 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1238 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1239 pc6300plus|AT&T 6300 plus,
1242 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1243 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1244 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1245 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1246 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1247 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1248 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1249 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1250 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1251 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1253 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1255 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1256 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1257 # is broken. All the special key sequences are broken, making it unusable
1258 # with Emacs. The problem stems from the following:
1260 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1261 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1262 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1263 # uses resizable terminal windows, but the bundled terminal program always
1264 # uses an 80x24 window (and doesn't support seem to support a 132-column
1267 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1268 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1269 # access method".) tam includes support for real, overlapping windows,
1270 # onscreen function key labels, and bitmap graphics. But since the primary
1271 # user interface on the UNIX PC was a GUI program (ua, for "user
1272 # assistant",) and remote administration was considered important for the
1273 # machine, tam also supported VT100-compatible terminals attached to the
1274 # serial port or used across the StarLan network. To simulate the extra keys
1275 # not present on a VT100, users could press ESC and a two-letter sequence,
1276 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1277 # however, were not the same as those sent by the actual Undo key. The
1278 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1279 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1280 # have the full documentation and several programs which use tam. It also
1281 # used an extended terminfo format to describe key sequences, special
1282 # highlighting modes, etc.)
1284 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1285 # there are two sequences for every key-modifier combination (local keyboard
1286 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1287 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1288 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1289 # seem to have been built from the manual describing the VT100 sequences.
1290 # This means it doesn't work for a real live UNIX PC.
1292 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1293 # character set". Rather than the VT100 graphics you might expect, it allows
1294 # up to 8 custom fonts to be loaded at any given time. This means that
1295 # programs expecting VT100 graphics will usually be disappointed. For this
1296 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1297 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1298 # manpage), should you wish to do so:
1300 # SGR10 - Select font 0 - ESC [ 10 m or SO
1301 # SGR11 - Select font 1 - ESC [ 11 m or SI
1302 # SGR12 - Select font 2 - ESC [ 12 m
1304 # SGR17 - Select font 7 - ESC [ 17 m
1306 # Graphics for line drawing are not reliably found at *any* character
1307 # location because the UNIX PC has dynamically reloadable fonts. I use font
1308 # 0 for regular text and font 1 for italics, but this is by no means
1309 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1311 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1312 # distributed terminfo.
1314 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1315 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1316 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1317 # attached by serial cable. In Emacs, even the Undo key works, and many
1318 # applications can now use the F1-F8 keys.
1321 # Terminfo entry for the AT&T Unix PC 7300
1322 # from escape(7) in Unix PC 7300 Manual.
1323 # Somewhat similar to a vt100-am (but different enough
1324 # to redo this from scratch.)
1326 # /***************************************************************
1328 # * FONT LOADING PROGRAM FOR THE UNIX PC
1330 # * This routine loads a font defined in the file ALTFONT
1331 # * into font memory slot #1. Once the font has been loaded,
1332 # * it can be used as an alternative character set.
1334 # * The call to ioctl with the argument WIOCLFONT is the key
1335 # * to this routine. For more information, see window(7) in
1336 # * the PC 7300 documentation.
1337 # ***************************************************************/
1338 # #include <string.h> /* needed for strcpy call */
1339 # #include <sys/window.h> /* needed for ioctl call */
1340 # #define FNSIZE 60 /* font name size */
1341 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1343 # * The file /usr/lib/wfont/special.8.ft comes with the
1344 # * standard PC software. It defines a graphics character set
1345 # * similar to that of the Teletype 5425 terminal. To view
1346 # * this or other fonts in /usr/lib/wfont, use the command
1347 # * cfont <filename>. For further information on fonts see
1348 # * cfont(1) in the PC 7300 documentation.
1351 # struct altfdata /* structure for alt font data */
1353 # short altf_slot; /* memory slot number */
1354 # char altf_name[FNSIZE]; /* font name (file name) */
1358 # int wd; /* window in which altfont will be */
1359 # struct altfdata altf;
1361 # strcpy(altf.altf_name,ALTFONT);
1362 # for (wd =1; wd < 12; wd++) {
1363 # ioctl(wd, WIOCLFONT,&altf);
1367 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1368 # they're confirmed by the man page for the System V display---esr)
1370 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1372 cols#80, it#8, lines#24,
1373 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1374 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1375 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1376 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1377 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1378 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1379 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1380 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1381 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1382 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1383 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1384 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1385 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1386 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1387 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1388 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1389 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1390 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1391 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1392 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1393 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1394 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1397 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1398 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1399 # for the application keypad mode. We have added iris-ansi-ap rather than
1400 # change the original to keypad mode.
1402 # (iris-ansi: added rmam/smam based on init string -- esr)
1404 # This entry, and those derived from it, is used in xwsh (also known as
1405 # winterm). Some capabilities that do not fit into the terminfo model
1406 # include the shift- and control-functionkeys:
1408 # F1-F12 generate different codes when shift or control modifiers are used.
1412 # control-F1 \E[025q
1414 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1415 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1417 # The cursor keys also have different codes:
1418 # control-up \E[162q
1419 # control-down \E[165q
1420 # control-left \E[159q
1421 # control-right \E[168q
1424 # shift-down \E[164q
1425 # shift-left \E[158q
1426 # shift-right \E[167q
1428 # control-tab \[072q
1430 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1432 cols#80, it#8, lines#40,
1433 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1434 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1435 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1436 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1437 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1438 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1439 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1440 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1441 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1442 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1443 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1444 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1445 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1446 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1447 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1448 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1449 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1450 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1451 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1453 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1454 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1455 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1457 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1458 # (T.Dickey 98/1/24)
1459 iris-color|xwsh|IRIX ANSI with color,
1461 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1462 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1463 rmul=\E[24m, rs1=\Ec,
1464 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1465 sitm=\E[3m, use=vt100+enq, use=klone+color,
1468 # The following is a version of the ibm-pc entry distributed with PC/IX,
1469 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1470 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1471 # (the former is untrue, and the latter failed under UCB/man); standout and
1472 # underline modes have been added. Note: this entry describes the "native"
1473 # capabilities of the PC monochrome display, without ANY emulation; most
1474 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1478 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1479 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1480 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1483 # (ibmpcx: this entry used to be known as ibmx.
1484 # It formerly included the following extension capabilities:
1485 # :GC=b:GL=v:GR=t:RT=^J:\
1486 # :GH=\E[196g:GV=\E[179g:\
1487 # :GU=\E[193g:GD=\E[194g:\
1488 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1489 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1490 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1491 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1492 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1493 # what was there before. -- esr)
1494 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1497 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1498 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1499 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1500 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1501 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1502 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1508 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1509 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1510 # right corner without triggering a scroll. The ncurses terminfo library can
1511 # handle this case with the <ich1> capability, and prefers <am> for better
1512 # optimization. Bug: The <op> capability resets attributes.
1513 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1514 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1515 qnx|qnx4|qnx console,
1516 daisy, km, mir, msgr, xhpa, xt,
1517 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1518 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1519 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1520 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1521 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1522 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1523 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1524 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1525 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1526 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1527 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1528 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1529 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1530 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1531 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1532 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1533 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1534 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1535 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1536 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1537 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1538 kext=\377\270, kf1=\377\201, kf10=\377\212,
1539 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1540 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1541 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1542 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1543 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1544 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1545 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1546 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1547 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1548 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1549 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1550 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1551 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1552 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1553 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1554 khlp=\377\350, khome=\377\240, khts=\377\342,
1555 kich1=\377\253, kil1=\377\273, kind=\377\261,
1556 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1557 knp=\377\252, knxt=\377\312, kopn=\377\357,
1558 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1559 kprv=\377\302, krdo=\377\336, kref=\377\354,
1560 kres=\377\360, krfr=\377\347, kri=\377\271,
1561 krmir=\377\313, krpl=\377\362, krst=\377\352,
1562 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1563 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1564 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1565 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1566 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1570 qnxt|qnxt4|QNX4 terminal,
1573 qnxm|QNX4 with mouse events,
1575 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1576 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1577 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1578 smicm=\E/>2h, use=qnx4,
1583 # Monochrome QNX4 terminal or console. Setting this terminal type will
1584 # allow an application running on a color console to behave as if it
1585 # were a monochrome terminal. Output will be through stdout instead of
1586 # console writes because the term routines will recognize that the
1587 # terminal name starts with 'qnxt'.
1589 qnxtmono|Monochrome QNX4 terminal or console,
1593 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1594 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1595 # (TD: derive from original qnx4 entry)
1596 qnxt2|qnx 2.15 serial terminal,
1598 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1599 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1601 # QNX ANSI terminal definition
1604 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1605 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1606 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1607 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1608 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1609 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1610 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1611 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1612 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1613 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1614 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1615 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1616 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1617 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1618 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1619 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1620 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1621 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1622 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1623 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1624 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1625 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1626 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1627 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1628 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1629 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1630 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1631 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1632 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1633 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1634 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1635 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1636 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1637 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1638 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1639 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1640 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1641 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1642 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1643 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1644 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1645 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1646 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1647 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1648 smul=\E[4m, tbc=\E[3g,
1649 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1651 qansi|QNX ansi with console writes,
1652 daisy, xhpa, use=qansi-g,
1654 qansi-t|QNX ansi without console writes,
1657 qansi-m|QNX ansi with mouse,
1659 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1660 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1661 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1662 smicm=\E[>2h, use=qansi,
1664 qansi-w|QNX ansi for windows,
1667 #### OpenBSD consoles
1669 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1671 # The following terminal descriptions for the AMD/Intel PC console
1672 # were prepared based on information contained in the OpenBSD-4.9
1673 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1675 # Added bce based on testing with tack -TD
1676 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1677 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1679 pccon+keys|OpenBSD PC keyboard keys,
1680 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1681 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
1682 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1683 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1684 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1686 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1687 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
1688 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
1689 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1690 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1691 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1692 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
1693 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1694 pccon+colors|ANSI colors for OpenBSD PC console,
1697 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1698 pccon+base|base capabilities for OpenBSD PC console,
1699 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1700 cols#80, it#8, lines#24,
1701 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
1702 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
1703 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1704 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1705 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1706 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
1707 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1708 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1709 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
1710 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1711 use=pccon0-m, use=pccon+colors,
1712 pccon-m|OpenBSD PC console without colors,
1713 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1714 pccon|OpenBSD PC console,
1715 use=pccon-m, use=pccon+colors,
1717 #### NetBSD consoles
1719 # pcvt termcap database entries (corresponding to release 3.31)
1720 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1722 # (For the terminfo master file, I translated these into terminfo syntax.
1723 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1724 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1725 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1727 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1728 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1729 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1730 pcvtXX|pcvt vt200 emulator (DEC VT220),
1731 am, km, mir, msgr, xenl,
1733 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1734 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1735 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1736 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1737 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1738 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1739 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1740 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1741 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1742 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1743 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1744 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1745 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1746 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1747 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1748 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1749 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1750 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1751 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1752 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1754 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1755 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1756 # 50 lines entries; 80 columns
1757 pcvt25|dec vt220 emulation with 25 lines,
1759 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1760 pcvt28|dec vt220 emulation with 28 lines,
1762 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1763 pcvt35|dec vt220 emulation with 35 lines,
1765 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1766 pcvt40|dec vt220 emulation with 40 lines,
1768 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1769 pcvt43|dec vt220 emulation with 43 lines,
1771 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1772 pcvt50|dec vt220 emulation with 50 lines,
1774 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1776 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1777 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1778 # 50 lines entries; 132 columns
1779 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1781 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1782 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1784 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1785 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1787 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1788 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1790 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1791 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1793 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1794 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1796 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1798 # OpenBSD implements a color variation
1799 pcvt25-color|dec vt220 emulation with 25 lines and color,
1801 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1802 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1803 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1804 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1805 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1808 # Terminfo entries to enable the use of the ncurses library in colour on a
1809 # NetBSD-arm32 console (only tested on a RiscPC).
1810 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1811 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1812 # typo in invis - TD
1813 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1814 am, bce, msgr, xenl, xon,
1815 cols#80, it#8, lines#30,
1816 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1817 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1818 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1819 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1820 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1821 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1822 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1823 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1824 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1825 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1826 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1827 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1828 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1829 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1830 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1832 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1833 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1834 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1837 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1838 cols#132, lines#50, use=arm100,
1840 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1841 # manufactured by Sharp for the Japenese market.
1842 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1843 x68k|x68k-ite|NetBSD/x68k ITE,
1845 kclr=\E[9~, khlp=\E[28~, use=vt220,
1848 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1850 # (still unfinished, but good enough so far.)
1851 ofcons|DNARD OpenFirmware console,
1854 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1855 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1856 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1857 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1858 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1859 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1860 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1861 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1862 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1863 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1864 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1865 rmso=\2330m, rmul=\2330m,
1866 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1869 # NetBSD "wscons" emulator in vt220 mode.
1870 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1871 # The emulator renders underlined text in red. Colors are otherwise usable.
1873 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1874 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1875 # vt220 screens in vttest do not work with this emulator. For instance, it
1876 # identifies itself (primary DA response) as a vt220 with selective erase. But
1877 # the selective erase feature does not work. The secondary response is copied
1878 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1879 # the level of detail in a termcap, it is a passable emulator, since ECH does
1880 # work. Don't use it on a VMS system -TD
1881 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1883 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1884 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1885 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1886 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1887 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1888 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1890 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1893 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1895 rcons|BSD rasterconsole,
1897 # Color version of above. Color currently only provided by NetBSD.
1898 rcons-color|BSD rasterconsole with ANSI color,
1901 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1903 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1904 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1905 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1906 # -- compare with cons25w
1908 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1909 colors#8, cols#80, it#8, lines#18, pairs#64,
1910 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1911 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1912 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1914 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1915 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1916 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1917 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1918 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1919 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1920 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1921 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1922 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1923 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1924 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1925 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1927 #### FreeBSD console entries
1929 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1930 # Andrey Chernov maintains the FreeBSD termcap distributions.
1932 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1933 # or comment out the :cb: capability in the console entry.
1935 # Alexander Lukyanov reports:
1936 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1937 # Now el1 clears not only to the line beginning, but also a large chunk
1938 # of previous line. But there is another bug - ech does not work at all.
1942 # common entry without semigraphics
1943 # Bug: The <op> capability resets attributes.
1944 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1945 # instance el1 does if the cursor is moved to the right margin first. Removed
1946 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1948 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1949 # Note that this disables standout with color.
1951 # The emulator sends difference strings based on shift- and control-keys,
1953 # F13-F24 are shifted F1-F12
1954 # F25-F36 are control F1-F12
1955 # F37-F48 are shift+control F1-F12
1956 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1957 am, bce, bw, eo, msgr, npc,
1958 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1959 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1960 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1961 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1962 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1963 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1964 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1965 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1966 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1967 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1968 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1969 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1970 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1971 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1972 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1973 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1974 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1975 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1976 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1977 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1978 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1979 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1980 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1981 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1982 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1983 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1984 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1985 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1987 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
1988 kbs=\177, kdch1=\E[3~, use=cons25,
1989 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1991 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1992 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1993 smul=\E[4m, use=cons25,
1994 cons30|ansi80x30|freebsd console (30-line ansi mode),
1995 lines#30, use=cons25,
1996 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1997 lines#30, use=cons25-m,
1998 cons43|ansi80x43|freebsd console (43-line ansi mode),
1999 lines#43, use=cons25,
2000 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2001 lines#43, use=cons25-m,
2002 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2003 lines#50, use=cons25,
2004 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2005 lines#50, use=cons25-m,
2006 cons60|ansi80x60|freebsd console (60-line ansi mode),
2007 lines#60, use=cons25,
2008 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2009 lines#60, use=cons25-m,
2010 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2011 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2013 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2015 op@, rmul=\E[m, setab@, setaf@,
2016 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2017 smul=\E[4m, use=cons25r,
2018 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2019 lines#50, use=cons25r,
2020 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2021 lines#50, use=cons25r-m,
2022 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2023 lines#60, use=cons25r,
2024 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2025 lines#60, use=cons25r-m,
2026 # ISO 8859-1 FreeBSD console
2027 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2028 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2030 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2032 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2033 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2034 smul=\E[4m, use=cons25l1,
2035 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2036 lines#50, use=cons25l1,
2037 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2038 lines#50, use=cons25l1-m,
2039 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2040 lines#60, use=cons25l1,
2041 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2042 lines#60, use=cons25l1-m,
2044 #### 386BSD and BSD/OS Consoles
2047 # This was the original 386BSD console entry (I think).
2048 # Some places it's named oldpc3|oldibmpc3.
2049 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2050 origpc3|origibmpc3|IBM PC 386BSD Console,
2051 OTbs, am, bw, eo, xon,
2053 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2054 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2055 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2056 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2057 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2058 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2059 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2061 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2062 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2065 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2066 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2067 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2068 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2070 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2071 # Note, the emulator supports many of the additional console features
2072 # listed in the iBCS2 (e.g. character-set selection) though not all
2073 # are described here. This entry really ought to be upgraded.
2074 # Also note, the console will also work with fewer lines after doing
2075 # "stty rows NN", e.g. to use 24 lines.
2076 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2077 # Bug: The <op> capability resets attributes.
2078 bsdos-pc|IBM PC BSD/OS Console,
2079 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2080 use=bsdos-pc-nobold,
2082 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2083 use=klone+color, use=bsdos-pc-m,
2085 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2086 OTbs, am, eo, km, xon,
2087 cols#80, it#8, lines#25,
2088 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2089 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2090 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2091 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2092 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2093 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2094 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2095 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2098 # Old names for BSD/OS PC console used in releases before 4.1.
2099 pc3|BSD/OS on the PC Console,
2100 use=bsdos-pc-nobold,
2101 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2104 # BSD/OS on the SPARC
2105 bsdos-sparc|Sun SPARC BSD/OS Console,
2108 # BSD/OS on the PowerPC
2109 bsdos-ppc|PowerPC BSD/OS Console,
2113 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2115 # Actually (TD pointed this out at the time the acsc string was added):
2116 # vt52 shouldn't define full acsc since most of the cells don't match.
2117 # see vt100 manual page A-31. This is the list that does match:
2126 # The line-drawing happens to work in several terminal emulators, but should
2127 # not be used as a guide to the capabilities of the vt52. Note in particular
2128 # that vt52 does not support line-drawing characters (the scan-X values refer
2129 # to a crude plotting feature) -TD
2132 cols#80, it#8, lines#24,
2133 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2134 cub1=\ED, cud1=\EB, cuf1=\EC,
2135 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2136 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2137 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2139 #### DEC VT100 and compatibles
2141 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2142 # and micro consoles can be found in the `obsolete' section. More details on
2143 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2144 # found near the end of this file.
2146 # Except where noted, these entries are DEC's official terminfos.
2147 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2148 # Engineering for more information. Updated terminfos and termcaps
2149 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2151 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2152 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2153 # its name to Boundless Technologies; see http://www.boundless.com.
2156 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2157 # certainly includes what DEC called the `Level 1 editing extension' codes;
2158 # only the very oldest VT100s lacked these and there probably aren't any of
2159 # those left alive. To capture these, use one of the VT102 entries.
2161 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2162 # since the cursor is left in a different position while in the
2163 # weird state (concept at beginning of next line, vt100 at end
2164 # of this line) so all versions of vi before 3.7 don't handle
2165 # <xenl> right on vt100. The correct way to handle <xenl> is when
2166 # you output the char in column 80, immediately output CR LF
2167 # and then assume you are in column 1 of the next line. If <xenl>
2168 # is on, am should be on too.
2170 # I assume you have smooth scroll off or are at a slow enough baud
2171 # rate that it doesn't matter (1200? or less). Also this assumes
2172 # that you set auto-nl to "on", if you set it off use vt100-nam
2175 # The padding requirements listed here are guesses. It is strongly
2176 # recommended that xon/xoff be enabled, as this is assumed here.
2178 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2179 # tab settings are in non-volatile memory and don't need to be
2180 # reset upon login. Also setting the number of columns glitches
2181 # the screen annoyingly. You can type "reset" to get them set.
2183 # The VT100 series terminals have cursor ("arrows") keys which can operate
2184 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2185 # is the reset state, and is assumed to be the normal state. Application
2186 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2187 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2188 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2189 # was provided primarily as an aid to the porting of VT52 applications. It is
2190 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2191 # applications such as vi will always transmit the <smkx> string. Therefore,
2192 # the definitions for the cursor keys are made to match what the terminal
2193 # transmits after the <smkx> string is transmitted. If the <smkx> string
2194 # is a null string or is not defined, then cursor keys are assumed to be in
2195 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2196 # else the application may fail. It is also expected that applications will
2197 # always transmit the <rmkx> string to the terminal before they exit.
2199 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2200 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2201 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2202 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2203 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2204 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2205 # Enter key transmits the same as the Return key (Note: the Return key
2206 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2207 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2208 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2209 # is normally in Numeric Mode. If an application requires that the keypad be
2210 # in Application Mode then it is expected that the user, or the application,
2211 # will set the TERM environment variable to point to a terminfo entry which has
2212 # defined the <smkx> string to include the codes that switch the keypad into
2213 # Application Mode, and the terminfo entry will also define function key
2214 # fields to match the Application Mode control codes. If the <smkx> string
2215 # is a null string or is not defined, then the keypad is assumed to be in
2216 # Numeric Mode. If the <smkx> string switches the keypad into Application
2217 # Mode, it is expected that the <rmkx> string will contain the control codes
2218 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2219 # applications which transmit the <smkx> string will also always transmit the
2220 # <rmkx> string to the terminal before they exit.
2222 # Here's a diagram of the VT100 keypad keys with their bindings.
2223 # The top line is the name of the key (some DEC keyboards have the keys
2224 # labelled somewhat differently, like GOLD instead of PF1, but this is
2225 # the most "official" name). The second line is the escape sequence it
2226 # generates in Application Keypad mode (where "$" means the ESC
2227 # character). The third line contains two items, first the mapping of
2228 # the key in terminfo, and then in termcap.
2229 # _______________________________________
2230 # | PF1 | PF2 | PF3 | PF4 |
2231 # | $OP | $OQ | $OR | $OS |
2232 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2234 # | $Ow | $Ox | $Oy | $Om |
2235 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2237 # | $Ot | $Ou | $Ov | $Ol |
2238 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2240 # | $Oq | $Or | $Os | enter |
2241 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2244 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2246 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2247 # terminfo guidelines. That is a compromise used to assign the remaining
2248 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2250 vt100+keypad|dec vt100 numeric keypad no fkeys,
2251 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2252 vt100+pfkeys|dec vt100 numeric keypad,
2253 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2255 vt100+fnkeys|dec vt100 numeric keypad,
2256 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2257 kf9=\EOw, use=vt100+pfkeys,
2259 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2260 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2261 # use the 5-key arrangement to model the arrow keys as suggested in the
2262 # terminfo guidelines:
2263 # _______________________________________
2264 # | PF1 | PF2 | PF3 | PF4 |
2265 # | $OP | $OQ | $OR | $OS |
2266 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2268 # | $Ow | $Ox | $Oy | $Om |
2269 # |_ka1__K1_|_________|_ka3__K3_|_________|
2271 # | $Ot | $Ou | $Ov | $Ol |
2272 # |_________|_kb2__K2_|_________|_________|
2274 # | $Oq | $Or | $Os | enter |
2275 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2278 # |___________________|_________|_kent_@8_|
2280 vt220+keypad|dec vt220 numeric keypad,
2281 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2282 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2285 vt100+enq|ncurses extension for vt100-style ENQ,
2286 u8=\E[?1;2c, use=ansi+enq,
2287 vt102+enq|ncurses extension for vt102-style ENQ,
2288 u8=\E[?6c, use=ansi+enq,
2290 # And here, for those of you with orphaned VT100s lacking documentation, is
2291 # a description of the soft switches invoked when you do `Set Up'.
2293 # Scroll 0-Jump Shifted 3 0-#
2294 # | 1-Smooth | 1-British pound sign
2295 # | Autorepeat 0-Off | Wrap Around 0-Off
2297 # | | Screen 0-Dark Bkg | | New Line 0-Off
2298 # | | | 1-Light Bkg | | | 1-On
2299 # | | | Cursor 0-Underline | | | Interlace 0-Off
2300 # | | | | 1-Block | | | | 1-On
2302 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2304 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2305 # | | | 1-On | | | 1-50 Hz
2306 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2307 # | | 1-ANSI | | 1-8 Bits
2308 # | Keyclick 0-Off | Parity 0-Off
2310 # Margin Bell 0-Off Parity Sense 0-Odd
2313 # The following SET-UP modes are assumed for normal operation:
2314 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2315 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2316 # Other SET-UP modes may be set for operator convenience or communication
2317 # requirements; I recommend
2318 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2319 # Unless you have a graphics add-on such as Digital Engineering's VT640
2320 # (and even then, whenever it can be arranged!) you should set
2323 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2324 vt100|vt100-am|dec vt100 (w/advanced video),
2325 OTbs, am, mc5i, msgr, xenl, xon,
2326 cols#80, it#8, lines#24, vt#3,
2327 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2328 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2329 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2330 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2331 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2332 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2333 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2334 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2335 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2336 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2337 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2338 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2339 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2340 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2341 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2342 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2344 vt100nam|vt100-nam|vt100 no automargins,
2345 am@, xenl@, use=vt100-am,
2346 vt100-vb|dec vt100 (w/advanced video) & no beep,
2347 bel@, flash=\E[?5h\E[?5l, use=vt100,
2349 # Ordinary vt100 in 132 column ("wide") mode.
2350 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2352 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2353 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2354 cols#132, lines#14, vt@,
2355 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2357 # vt100 with no advanced video.
2358 vt100-nav|vt100 without advanced video option,
2360 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2362 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2363 cols#132, lines#14, use=vt100-nav,
2365 # vt100 with one of the 24 lines used as a status line.
2366 # We put the status line on the top.
2367 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2370 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2371 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2372 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2373 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2375 # Status line at bottom.
2376 # Clearing the screen will clobber status line.
2377 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2380 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2381 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2383 # Most of the `vt100' emulators out there actually emulate a vt102
2384 # This entry (or vt102-nsgr) is probably the right thing to use for
2387 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2389 vt102-w|dec vt102 in wide mode,
2391 rs3=\E[?3h, use=vt102,
2393 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2394 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2395 # string in the canonical vt100 entry above leaves the screen littered
2396 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2397 # after highlight turnoffs. This entry should fix that, and even leave
2398 # ACS support working, at the cost of making multiple-highlight changes
2399 # slightly more expensive.
2400 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2401 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2402 sgr@, sgr0=\E[m, use=vt102,
2404 # VT125 Graphics CRT. Clear screen also erases graphics
2405 # Some vt125's came configured with vt102 support.
2406 vt125|vt125 graphics terminal,
2408 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2410 # This isn't a DEC entry, it came from University of Wisconsin.
2411 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2414 cols#80, it#8, lines#24, vt#3,
2415 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2416 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2417 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2418 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2419 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2420 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2421 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2422 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2423 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2425 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2426 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2427 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2429 # vt132 - like vt100 but slower and has ins/del line and such.
2430 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2431 # manual and from the ANSI standard, this describes the actual
2432 # terminal. I've never actually used a vt132 myself, so this
2437 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2438 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2440 # This vt220 description maps F5--F9 to the second block of function keys
2441 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2442 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2443 # PF1--PF4 are used as F1--F4.
2445 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2446 OTbs, OTpt, am, mir, xenl, xon,
2447 cols#80, lines#24, vt#3,
2449 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2450 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2451 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2452 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2453 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2454 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2455 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2456 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2457 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2458 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2459 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2460 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2461 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2462 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2463 rmso=\E[27m, rmul=\E[24m,
2464 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2465 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2466 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2467 smso=\E[7m, smul=\E[4m,
2469 # A much better description of the VT200/220; used to be vt220-8
2470 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2471 # designation to accommodate bug in pcvt -TD
2472 vt220|vt200|dec vt220,
2473 OTbs, am, mc5i, mir, msgr, xenl, xon,
2474 cols#80, it#8, lines#24, vt#3,
2475 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2476 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2477 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2478 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2479 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2480 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2481 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2482 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2483 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2484 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2485 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2486 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2487 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2488 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2489 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2490 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2491 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2492 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2493 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2494 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2495 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2496 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2497 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2498 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2499 vt220-w|vt200-w|DEC vt220 in wide mode,
2501 rs3=\E[?3h, use=vt220,
2502 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2503 OTbs, am, mc5i, mir, msgr, xenl, xon,
2504 cols#80, it#8, lines#24, vt#3,
2505 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2506 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2507 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2508 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2509 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2510 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2511 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2512 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2513 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2514 il=\233%p1%dL, il1=\233L, ind=\ED,
2515 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2516 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2517 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2518 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2519 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2520 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2521 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2522 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2523 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2524 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2525 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2526 rs1=\233?3l, sc=\E7,
2527 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2528 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2529 smso=\2337m, smul=\2334m, tbc=\2333g,
2532 # This vt220 description regards F6--F10 as the second block of function keys
2533 # at the top of the keyboard. This mapping follows the description given
2534 # in the VT220 Programmer Reference Manual and agrees with the labeling
2535 # on some terminals that emulate the vt220. There is no support for an F5.
2536 # See vt220 for an alternate mapping.
2538 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2539 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2540 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2541 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2542 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2544 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2546 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2548 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2549 # (not an official DEC entry!)
2550 # The problem with real vt220 terminals is they don't send escapes when in
2551 # in vt220 mode. This can be gotten around two ways. 1> don't send
2552 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2553 # features of vt100 advanced video which it then has.
2555 # This entry takes the view of putting a vt220 into vt100 mode so
2556 # you can use the escape key in emacs and everything else which needs it.
2558 # You probably don't want to use this on a VMS machine since VMS will think
2559 # it has a vt220 and will get fouled up coming out of emacs
2561 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2562 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2563 vt200-js|vt220-js|dec vt200 series with jump scroll,
2566 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2567 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2568 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2569 ht=^I, il1=\E[L, ind=\ED,
2570 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2571 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2572 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2573 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2574 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2575 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2576 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2578 # This was DEC's vt320. Use the purpose-built one below instead
2579 #vt320|DEC VT320 in vt100 emulation mode,
2582 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2584 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2586 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2588 # These entries are not DEC's official ones, they were purpose-built for the
2589 # VT320. Here are the designer's notes:
2590 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2591 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2592 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2593 # Things that use <knxt> usually use tab anyways... and things that don't use
2594 # tab usually use <knxt> instead...
2595 # kprv is same as tab - Backtab is useless...
2596 # I left out <sgr> because of its RIDICULOUS complexity,
2597 # and the resulting fact that it causes the termcap translation of the entry
2598 # to SMASH the 1k-barrier...
2599 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2600 # (vt320: uncommented <fsl> --esr)
2601 vt320|vt300|dec vt320 7 bit terminal,
2602 am, eslok, hs, mir, msgr, xenl,
2603 cols#80, lines#24, wsl#80,
2604 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2605 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2606 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2607 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2608 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2609 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2610 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2611 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2612 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2614 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2615 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2616 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2617 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2618 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2619 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2620 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2621 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2622 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2623 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2624 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2626 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2628 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2629 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2630 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2631 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2632 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2634 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2635 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2637 # We have to init 132-col mode, not 80-col mode.
2638 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2640 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2641 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2643 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2645 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2646 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2649 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2650 # which are pretty much a superset of the VT320. They have the
2651 # host writable status line, yet another different DRCS matrix size,
2652 # and such, but they add the DEC Technical character set, Multiple text
2653 # pages, selectable length pages, and the like. The difference between
2654 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2655 # monitor, the former has 4 planes and a color monitor. These terminals
2656 # support VT131 and ANSI block mode, but as with much of these things,
2657 # termcap/terminfo doesn't deal with these features.
2659 # Note that this entry is are set up in what was the standard way for GNU
2660 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2661 # keys were switched into application mode at the same time the numeric pad
2662 # is switched into application mode. This changes the definitions of the
2663 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2664 # your termcap or terminfo entry,
2666 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2667 # (vt340: string capability "sb=\E[M" corrected to "sr";
2668 # also, added <rmam>/<smam> based on the init string -- esr)
2669 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2670 am, eslok, hs, mir, msgr, xenl, xon,
2671 cols#80, it#8, lines#24, vt#3,
2672 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2673 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2674 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2675 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2676 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2677 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2678 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2679 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2680 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2682 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2683 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2684 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2685 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2686 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2687 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2688 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2689 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2690 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2691 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2692 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2693 tsl=\E[2$~\E[1$}\E[1;%dH,
2695 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2696 # (originally written with vt420 as its primary name, and usable for it).
2698 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2699 # text pages and long text pages with selectable length of the vt340, along
2700 # with left and right margins, rectangular area text copy, fill, and erase
2701 # operations, selected region character attribute change operations,
2702 # page memory and rectangle checksums, insert/delete column, reception
2703 # macros, and other features too numerous to remember right now. TERMCAP
2704 # can only take advantage of a few of these added features.
2706 # Note that this entry is are set up in what was the standard way for GNU
2707 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2708 # keys were switched into application mode at the same time the numeric pad
2709 # is switched into application mode. This changes the definitions of the
2710 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2711 # your termcap entry,
2713 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2714 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2715 # also, added <rmam>/<smam> based on the init string -- esr)
2716 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2717 am, eslok, hs, mir, msgr, xenl, xon,
2718 cols#80, it#8, lines#24, vt#3,
2719 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2720 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2721 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2722 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2723 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2724 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2725 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2726 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2727 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2728 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2729 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2730 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2731 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2732 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2733 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2734 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2735 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2736 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2737 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2738 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2739 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2740 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2741 tsl=\E[2$~\E[1$}\E[1;%dH,
2743 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2744 # a missing <sc> -- esr)
2747 cols#80, lines#24, vt#3,
2748 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2749 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2750 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2751 cub1=^H, cud1=\E[B, cuf1=\E[C,
2752 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2753 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2754 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2755 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2756 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2757 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2758 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2759 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2760 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2761 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2762 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2763 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2764 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2765 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2766 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2767 smkx=\E=, smso=\E[7m, smul=\E[4m,
2769 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2770 # takes two parameters, the key and the string. Translating the key is
2771 # straightforward (keys 1-5 are not defined on real terminals, though some
2772 # emulators define these):
2774 # if (key < 16) then value = key;
2775 # else if (key < 21) then value = key + 1;
2776 # else if (key < 25) then value = key + 2;
2777 # else if (key < 27) then value = key + 3;
2778 # else if (key < 30) then value = key + 4;
2779 # else value = key + 5;
2781 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2782 # There's no provision in terminfo for emitting a string in this format, so the
2783 # application has to know it.
2785 vt420pc|DEC VT420 w/PC keyboard,
2786 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2787 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2788 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2789 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2790 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2791 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2792 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2793 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2794 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2795 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2796 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2797 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2798 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2799 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2800 pctrm=USR_TERM\:vt420pcdos\:,
2801 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2804 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2806 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2808 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2809 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2811 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2812 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2813 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2814 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2815 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2816 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2817 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2822 vt510pc|DEC VT510 w/PC keyboard,
2824 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2829 # The VT520 is a monochrome text terminal capable of managing up to
2830 # four independent sessions in the terminal. It has multiple ANSI
2831 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2832 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2833 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2835 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2836 # [Alt]/[Print Screen] depending upon which keyboard and which
2837 # terminal mode is being used. If Set-Up has been disabled or
2838 # assigned to an unknown key, Set-Up may be entered by pressing
2839 # [F3] as the first key after power up, regardless of keyboard type.
2840 # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2843 cols#80, lines#24, vt#3,
2844 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2845 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2846 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2847 cub1=^H, cud1=\E[B, cuf1=\E[C,
2848 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2849 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2850 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2851 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2852 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2853 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2854 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2855 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2857 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2858 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2859 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2860 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2861 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2862 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2863 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2864 smso=\E[7m, smul=\E[4m,
2866 # (vt525: I added <rmam>/<smam> based on the init string;
2867 # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2870 cols#80, lines#24, vt#3,
2871 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2872 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2873 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2874 cub1=^H, cud1=\E[B, cuf1=\E[C,
2875 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2876 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2877 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2878 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2879 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2880 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2881 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2882 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2884 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2885 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2886 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2887 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2888 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2889 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2890 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2891 smso=\E[7m, smul=\E[4m,
2893 #### VT100 emulations
2896 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2897 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2898 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2899 # that this works best with a stock vt100 entry.
2900 dec-vt100|EWAN telnet's vt100 emulation,
2903 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2904 dec-vt220|DOS tnvt200 terminal emulator,
2907 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2908 # anyone who needs PC VT340 emulation. (or anything below that level, for
2909 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2910 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2911 # I can send the address if requested.
2912 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2913 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2914 z340|zstem vt340 terminal emulator 132col 42line,
2916 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2917 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2919 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2921 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2922 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2925 # CRT is shareware. It implements some xterm features, including mouse.
2926 crt|crt-vt220|CRT 2.3 emulating VT220,
2929 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2931 # PuTTY 0.55 (released 3 August 2004)
2932 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2934 # Comparing with 0.51, vttest is much better (only a few problems with the
2935 # cursor position reports and wrapping).
2937 # PuTTY 0.51 (released 14 December 2000)
2939 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2940 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2941 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2942 # to xterm, which is incorrect, since several features are misimplemented:
2944 # Alt+key always sends ESC+key, so 'km' capability is removed.
2946 # Control responses, wrapping and tabs are buggy, failing a couple of
2947 # screens in vttest.
2949 # xterm mouse support is not implemented (unrelease version may).
2951 # Several features such as backspace/delete are optional; this entry documents
2952 # the default behavior -TD
2954 putty|PuTTY terminal emulator,
2955 am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT,
2956 colors#8, it#8, ncv#22, pairs#64, U8#1,
2957 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2958 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2959 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2960 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2961 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2962 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2963 dch=\E[%p1%dP, dch1=\E[P,
2964 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2965 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2966 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2967 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2968 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2970 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2971 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2972 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2973 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2974 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2975 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2976 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2977 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2978 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2979 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2980 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2981 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2982 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2983 rmso=\E[27m, rmul=\E[24m,
2984 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2985 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2986 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2987 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2988 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2989 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2990 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2991 vt100-putty|Reset PuTTY to pure vt100,
2992 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2994 # palette is hardcoded...
2995 putty-256color|PuTTY 0.58 with xterm 256-colors,
2996 initc@, use=xterm+256color, use=putty,
2998 # One of the keyboard selections is "VT100+".
2999 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3000 putty-vt100|VT100+ keyboard layout,
3001 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3002 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3003 kf9=\EOX, use=putty,
3005 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3007 # Use modifiers to obtain function keys past 12:
3010 # F25-F36 - control/alt
3011 # F37-F48 - control/shift
3013 putty-sco|putty with SCO function keys,
3014 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3015 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3016 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3017 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3018 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3019 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3020 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3021 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3022 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3023 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3024 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3025 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3027 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3028 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3029 # (communication program) which supports:
3031 # - Serial port connections.
3032 # - TCP/IP (telnet) connections.
3033 # - VT100 emulation, and selected VT200/300 emulation.
3034 # - TEK4010 emulation.
3035 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3037 # - Scripts using the "Tera Term Language".
3038 # - Japanese and Russian character sets.
3040 # The program does not come with terminfo or termcap entries. However, the
3041 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3042 # vt52 or doublesize character support; blinking is done with color). Besides
3043 # the HPA, VPA extensions it also implements CPL and CNL.
3045 # All of the function keys can be remapped. This description shows the default
3046 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3047 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3048 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3056 # ANSI colors are implemented, but cannot be combined with video attributes
3057 # except for reverse.
3059 # No fonts are supplied with the program, so the acsc string is chosen to
3060 # correspond with the default Microsoft terminal font.
3062 # Tera Term recognizes some xterm sequences, including those for setting and
3063 # retrieving the window title, and for setting the window size (i.e., using
3064 # "resize -s"), though it does not pass SIGWINCH to the application if the
3065 # user resizes the window with the mouse.
3066 teraterm2.3|Tera Term Pro,
3069 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3070 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3071 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3072 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3073 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3074 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3075 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3076 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3077 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3078 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3079 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3080 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3081 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3082 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3083 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3084 use=klone+color, use=vt100,
3086 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3087 # to choose a Windows OEM font).
3089 # Testing with tack:
3090 # - it does not have xenl (suppress that)
3091 # - underline seems to work with color (modify ncv).
3092 # Testing with vttest:
3093 # - wrapping differs from vt100 (menu 1).
3094 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3096 # - it recognizes the dtterm window controls for reporting size in
3097 # characters and pixels.
3098 # - it passes SIGWINCH.
3099 teraterm4.59|Tera Term Pro,
3102 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3103 kmous=\E[M, use=teraterm2.3,
3108 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3109 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3112 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3113 # for casual (occasional) use. Also fails several of the vttest screens,
3114 # but that is not unusual for vt100 "emulators".
3115 # b) Does not implement vt100 keypad
3116 # c) Recognizes a subset of vt52 controls.
3117 ms-vt100|MS telnet imitating dec vt100,
3119 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3120 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3121 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3123 # Tested with Windows 2000, the telnet application runs in a console window,
3124 # also using 'Terminal' font.
3127 # a) This version has no function keys or numeric keypad. Unlike the older
3128 # version, the numeric keypad is entirely ignored.
3129 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3130 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3132 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3135 # Based on comments from Federico Bianchi:
3137 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3138 # scheme for PF keys.
3140 # and PuTTY wishlist:
3142 # The modifiers are represented as the codes listed above, prefixed to
3143 # the normal sequences. If the modifier is pressed alone, its sequence
3144 # is transmitted twice in succession. If multiple modifiers apply,
3145 # they're transmitted in the order shift, control, alt.
3150 ms-vt100+|vt100+|windows XP vt100+ (sic),
3151 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3152 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3153 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3154 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3155 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3156 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3157 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3158 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3159 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3160 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3161 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3162 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3163 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3164 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3165 knp=\E/, kpp=\E?, use=ms-vt100-color,
3167 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3170 # expect-5.44.1.15/example/tkterm
3171 # a minimal subset of a vt100 (compare with "news-unk).
3173 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3174 tt|tkterm|Don Libes' tk text widget terminal emulator,
3175 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3176 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3177 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3178 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3181 ######## X TERMINAL EMULATORS
3184 # You can add the following line to your .Xdefaults to change the terminal type
3185 # set by the xterms you start up to my-xterm:
3187 # *termName: my-xterm
3189 # System administrators can change the default entry for xterm instances
3190 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3191 # case, xterm will detect and reject an invalid terminal type, falling back
3192 # to the default of xterm.
3195 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3196 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3197 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3198 # as these seem not to work -- esr)
3199 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3200 OTbs, am, km, mir, msgr, xenl, xon,
3201 cols#80, it#8, lines#65,
3202 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3203 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3204 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3205 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3206 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3207 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3208 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3209 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3210 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3211 smso=\E[7m, smul=\E[4m,
3212 # Compatible with the R5 xterm
3213 # (from the XFree86 3.2 distribution, <blink=@> removed)
3214 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3215 # corrected typos in rs2 string - TD
3217 xterm-r5|xterm R5 version,
3218 OTbs, am, km, msgr, xenl,
3219 cols#80, it#8, lines#24,
3220 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3221 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3222 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3223 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3224 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3225 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3226 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3227 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3228 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3229 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3230 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3231 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3232 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3233 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3235 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3237 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3238 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3239 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3240 # Compatible with the R6 xterm
3241 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3242 # added khome/kend, hts based on the R6 xterm code - TD
3243 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3244 # for compatibility with other emulators).
3245 xterm-r6|xterm-old|xterm X11R6 version,
3246 OTbs, am, km, mir, msgr, xenl,
3247 cols#80, it#8, lines#24,
3248 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3249 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3250 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3251 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3252 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3253 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3254 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3256 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3257 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3258 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3259 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3260 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3261 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3262 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3263 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3264 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3265 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3266 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3267 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3268 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3269 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3271 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3272 # The name has been changed and some aliases have been removed.
3273 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3274 OTbs, am, bce, km, mir, msgr, xenl,
3275 cols#80, it#8, lines#24, ncv@,
3276 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3277 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3278 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3279 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3280 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3281 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3282 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3283 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3284 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3285 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3287 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3288 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3289 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3290 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3291 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3292 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3293 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3294 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3295 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3296 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3297 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3298 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3299 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3300 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3301 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3302 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3303 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3304 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3305 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3306 use=ecma+color, use=vt220+keypad,
3308 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3309 # codes for F1-F4 except while in VT220 mode.
3310 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3311 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3313 # This version was released in XFree86 3.3.3 (November 1998).
3314 # Besides providing printer support, it exploits a new feature that allows
3315 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3316 # -- the distribution contained incorrect khome/kend values -TD
3317 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3319 blink=\E[5m, ich1@, invis=\E[8m,
3320 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3321 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
3322 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
3323 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3324 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
3326 # This version was released in XFree86 4.0.
3327 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3329 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3330 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3331 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3332 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3333 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3334 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3335 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3336 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3337 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3338 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3339 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3340 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3341 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3342 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3343 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3344 smcup=\E[?1049h, use=xterm-xf86-v333,
3346 # This version was released in XFree86 4.3.
3347 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3348 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3349 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3351 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3354 # This version was released in XFree86 4.4.
3355 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3356 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3357 rin=\E[%p1%dT, use=xterm-xf86-v43,
3359 xterm-xfree86|xterm terminal emulator (XFree86),
3362 # This version reflects the current xterm features.
3363 xterm-new|modern xterm terminal emulator,
3365 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3366 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3369 # This fragment is for people who cannot agree on what the backspace key
3371 xterm+kbs|fragment for backspace key,
3374 # This fragment describes as much of XFree86 xterm's "pc-style" function
3375 # keys as will fit into terminfo's 60 function keys.
3378 # ---------------------------------
3385 # 8 Shift + Alt + Control
3386 # ---------------------------------
3387 # The meta key may also be used as a modifier in this scheme, adding another
3388 # bit to the parameter.
3389 xterm+pcfkeys|fragment for PC-style fkeys,
3390 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3393 xterm+noapp|fragment with cursor keys in normal mode,
3394 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3397 xterm+app|fragment with cursor keys in application mode,
3398 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3401 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3402 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3403 # the earlier scheme, as noted in the "use=" clauses in this file.
3405 # The original assignments from patch #94 for cursor-keys had some technical
3408 # A parameter for a function-key to represent a modifier is just more
3409 # bits. But for a cursor-key it may change the behavior of the
3410 # application. For instance, emacs decodes the first parameter of a
3411 # cursor-key as a repeat count.
3413 # A parameterized string should (really) not begin with SS3 (\EO).
3414 # Rather, CSI (\E[) should be used.
3416 # For these reasons, the original assignments were deprecated. For
3417 # compatibility reasons, they are still available as a setting of xterm's
3418 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3419 # that might apply to xterm+pcfkeys with different values of that resource.
3420 xterm+pcc3|fragment with modifyCursorKeys:3,
3421 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3422 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3423 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3424 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3425 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3426 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3427 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3428 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3431 xterm+pcc2|fragment with modifyCursorKeys:2,
3432 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3433 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3434 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3435 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3436 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3437 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3438 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3440 xterm+pcc1|fragment with modifyCursorKeys:1,
3441 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3442 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3443 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3444 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3445 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3446 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3448 xterm+pcc0|fragment with modifyCursorKeys:0,
3449 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3450 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3451 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3452 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3453 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3454 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3457 # Here are corresponding fragments from xterm patch #216:
3459 xterm+pcf0|fragment with modifyFunctionKeys:0,
3460 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3461 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3462 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3463 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3464 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3465 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3466 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3467 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3468 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3469 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3470 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3471 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3472 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3473 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3474 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3475 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3476 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3478 xterm+pcf2|fragment with modifyFunctionKeys:2,
3479 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3480 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3481 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3482 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3483 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3484 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3485 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3486 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3487 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3488 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3489 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3490 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3491 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3492 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3493 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3494 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3495 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3496 kf8=\E[19~, kf9=\E[20~,
3498 # Chunks from xterm #230:
3499 xterm+pce2|fragment with modifyCursorKeys:2,
3500 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3501 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3502 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3503 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3504 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3505 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3506 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3507 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3508 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3509 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3510 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3513 xterm+edit|fragment for 6-key editing-keypad,
3514 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3517 xterm+pc+edit|fragment for pc-style editing keypad,
3518 kend=\E[4~, khome=\E[1~,
3520 xterm+vt+edit|fragment for vt220-style editing keypad,
3521 kfnd=\E[1~, kslt=\E[4~,
3524 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3525 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3526 # is shown here (because that is used in mrxvt and mlterm):
3527 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3528 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3529 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3530 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3531 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3532 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3533 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3534 kf63=\E[13;4~, use=xterm+pcf2,
3536 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3537 xterm-basic|modern xterm terminal emulator - common,
3538 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3539 colors#8, cols#80, it#8, lines#24, pairs#64,
3540 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3541 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3542 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3543 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3544 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3545 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3546 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3547 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3548 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3549 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3550 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
3551 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3552 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3553 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3554 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3555 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3556 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3557 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3558 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3559 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3560 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3561 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3562 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs,
3565 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3566 # In retrospect, something like xterm-r6 was intended here -TD
3567 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3568 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3570 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3571 # If configured to support 88- or 256-colors (which is fairly common in 2009),
3572 # xterm also recognizes the control sequences for initc -TD
3573 xterm-16color|xterm with 16 colors like aixterm,
3575 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3576 use=ibm+16color, use=xterm-new,
3578 # 256-colors is a compile-time feature of XFree86 xterm beginning with
3579 # patch #111 (1999/7/10) -TD
3580 xterm+256color|xterm 256-color feature,
3582 colors#256, pairs#32767,
3583 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3584 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3585 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3588 # 88-colors is a compile-time feature of XFree86 xterm beginning with
3589 # patch #115 (1999/9/18) -TD
3591 # Note that the escape sequences used are the same as for 256-colors - xterm
3592 # has a different table of default color resource values. If built for
3593 # 256-colors, it can still handle an 88-color palette by using the initc
3596 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3597 # which support the xterm+256color feature support the associated initc
3598 # capability. So it is cancelled in the entries which use this and/or the
3599 # xterm+256color block.
3601 # The default color palette for the 256- and 88-colors are different. A
3602 # given executable will have one palette (perhaps compiled-in). If the program
3603 # supports xterm's control sequence, it can be programmed using initc.
3604 xterm+88color|xterm 88-color feature,
3605 colors#88, pairs#7744, use=xterm+256color,
3607 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3608 xterm-256color|xterm with 256 colors,
3609 use=xterm+256color, use=xterm-new,
3610 xterm-88color|xterm with 88 colors,
3611 use=xterm+88color, use=xterm-256color,
3613 # These two are used to demonstrate the any-event mouse support, i.e., by
3614 # using an extended name "XM" which tells ncurses to put the terminal into
3615 # a special mode when initializing the xterm mouse.
3616 xterm-1002|testing xterm-mouse,
3617 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3618 xterm-1003|testing xterm-mouse,
3619 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3621 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
3622 # asked for some of xterm's advanced features to be added to its terminfo
3623 # entry. It defines extended capabilities not found in standard terminfo or
3624 # termcap. These are useful in tmux, for instance, hence the name.
3626 # One caveat in adding extended capabilities in ncurses is that if the names
3627 # are longer than two characters, then they will not be visible through the
3628 # termcap interface.
3630 # Ms modifies the selection/clipboard. Its parameters are
3631 # p1 = the storage unit (clipboard, selection or cut buffer)
3632 # p2 = the base64-encoded clipboard content.
3634 # Ss is used to set the cursor style as described by the DECSCUSR
3635 # function to a block or underline.
3636 # Se resets the cursor style to the terminal power-on default.
3638 # Cs and Ce set and reset the cursor colour.
3639 xterm+tmux|advanced xterm features used in tmux,
3640 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
3641 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
3643 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3644 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3645 # To use it, your decTerminalID resource must be set to 200 or above.
3652 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3653 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3654 colors#8, cols#80, it#8, lines#24, pairs#64,
3655 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3656 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3657 civis=\233?25l, clear=\233H\2332J,
3658 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3659 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3660 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3661 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3662 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3663 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3664 flash=\233?5h$<100/>\233?5l, home=\233H,
3665 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3666 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3667 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3668 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
3669 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3670 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3671 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3672 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3673 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3674 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3675 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3676 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3677 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3678 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3679 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3680 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3682 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3683 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3684 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3685 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3686 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3687 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3688 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3689 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3690 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3693 xterm-hp|xterm with hpterm function keys,
3694 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3695 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3696 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3697 knp=\ES, kpp=\ET, use=xterm-basic,
3699 xterm-sco|xterm with SCO function keys,
3700 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3701 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3702 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3703 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3704 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3705 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3706 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3707 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3708 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3709 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3710 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3711 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3714 # The xterm-new description has all of the features, but is not completely
3715 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3716 # sunKeyboard resource to true:
3717 # + maps the editing keypad
3718 # + interprets control-function-key as a second array of keys, so a
3719 # 12-fkey keyboard can support vt220's 20-fkeys.
3720 # + maps numeric keypad "+" to ",".
3721 # + uses DEC-style control sequences for the application keypad.
3723 xterm-vt220|xterm emulating vt220,
3724 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3725 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3726 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3727 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3728 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3729 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3730 use=xterm+app, use=xterm+edit, use=xterm-basic,
3733 xterm-vt52|xterm emulating dec vt52,
3734 cols#80, it#8, lines#24,
3735 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3736 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3737 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3738 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3739 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3742 xterm-noapp|xterm with cursor keys in normal mode,
3743 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3746 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3747 lines#24, use=xterm-old,
3749 # This is xterm for ncurses.
3750 xterm|xterm terminal emulator (X Window System),
3753 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
3754 # setting the vt100Graphics resource to false.
3755 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
3758 # These entries allow access to the X titlebar and icon name as a status line.
3759 # Note that twm (and possibly window managers descended from it such as tvtwm,
3760 # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3762 xterm+sl|access X title line and icon name,
3765 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3766 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3769 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3772 # The following xterm variants don't depend on your base version
3774 # xterm with bold instead of underline
3775 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3776 smso=\E[7m, smul=\E[1m, use=xterm-old,
3778 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3779 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3780 ich@, ich1@, use=xterm,
3781 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3782 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3783 rmcup@, smcup@, use=xterm,
3786 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3787 # (kterm should not invoke DEC Graphics as the alternate character set
3788 # -- Kenji Rikitake)
3789 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3790 # -- MATSUMOTO Shoji)
3791 # kterm implements acsc via built-in table of X Drawable's
3792 kterm|kterm kanji terminal emulator (X window system),
3795 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3796 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3797 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3798 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3799 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3800 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3801 kterm-color|kterm-co|kterm with ANSI colors,
3802 ncv@, use=kterm, use=ecma+color,
3805 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3806 # variant of xterm which is apparently no longer supported, but are interesting
3807 # because they illustrate SVr4 curses mouse controls - T.Dickey
3808 xtermm|xterm terminal emulator (monocrome),
3809 OTbs, am, km, mir, msgr, xenl,
3810 btns#3, cols#80, it#8, lines#24,
3811 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3812 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3813 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
3814 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3815 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3816 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3817 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3818 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3819 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3820 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3821 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3822 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3823 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3824 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3825 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3826 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3827 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3828 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3829 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3831 xtermc|xterm terminal emulator (color),
3832 colors#8, ncv#7, pairs#64,
3833 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3834 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3835 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3838 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3839 # Here's a termcap entry I've been using for xterm_color, which comes
3840 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3841 # color stuff, I also have a status line defined as the window manager
3842 # title bar. [I have translated it to terminfo -- ESR]
3843 xterm-pcolor|xterm with color used for highlights and status line,
3844 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
3845 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
3847 # This describes the capabilities of color_xterm, an xterm variant from
3848 # before ECMA-64 color support was folded into the main-line xterm release.
3849 # This entry is straight from color_xterm's maintainer.
3850 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3851 # The README's with the distribution also say that it supports SGR 21, 24, 25
3852 # and 27, but they are not present in the terminfo or termcap.
3853 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3854 OTbs, am, km, mir, msgr, xenl, XT,
3855 cols#80, it#8, lines#65, ncv@,
3856 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3857 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3858 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3859 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3860 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3861 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3862 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3863 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3864 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3865 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3866 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3867 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3868 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3869 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3870 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3871 rmso=\E[27m, rmul=\E[24m,
3872 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3874 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3875 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3876 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3877 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3879 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3880 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3881 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3882 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3883 # that each of those implements the home, end, delete keys differently.
3885 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3886 # colors; note that this is not compatible with the 5.2 version.
3887 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3888 # match XFree86's xterm.terminfo usage and prevent circular links
3889 xterm-color|nxterm|generic color xterm,
3891 op=\E[m, use=xterm-r6, use=klone+color,
3893 # This entry describes an xterm with Sun-style function keys enabled
3894 # via the X resource setting "xterm*sunFunctionKeys:true"
3895 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
3896 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
3897 # because we want it to be seen as <kcpy>.
3898 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
3899 # with their Sun keyboard labels instead.
3900 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
3901 xterm-sun|xterm with sunFunctionKeys true,
3902 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
3903 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
3904 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
3905 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
3906 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
3907 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
3908 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
3909 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
3910 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
3911 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
3912 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
3913 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
3915 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
3916 cols#80, lines#24, use=xterm-sun,
3919 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3920 gnome-rh62|Gnome terminal,
3922 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3925 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3927 # This implements a subset of vt102 with a random selection of features from
3928 # other terminals such as color and function-keys.
3930 # shift-f1 to shift-f10 are f11 to f20
3932 # NumLock changes the application keypad to approximate vt100 keypad, except
3933 # that there is no escape sequence matching comma (,).
3935 # Other defects observed:
3936 # vt100 LNM mode is not implemented.
3937 # vt100 80/132 column mode is not implemented.
3938 # vt100 DECALN is not implemented.
3939 # vt100 DECSCNM mode is not implemented, so flash does not work.
3940 # vt100 TBC (tab reset) is not implemented.
3941 # xterm alternate screen controls do not restore cursor position properly
3942 # it hangs in tack after running function-keys test.
3943 gnome-rh72|GNOME Terminal,
3945 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3946 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3947 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3948 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3950 # GNOME Terminal 2.0.1 (Redhat 8.0)
3952 # Documentation now claims it implements vt220 (which is demonstrably false).
3953 # However, it does implement ECH, which is a vt220 feature. And there are
3954 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3955 # more of its bugs using vttest.
3957 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3958 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3960 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3961 # operations. Shift-tab generates a distinct sequence so it can be argued
3962 # that it implements kcbt.
3963 gnome-rh80|GNOME Terminal,
3965 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3966 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3968 # GNOME Terminal 2.2.1 (Redhat 9.0)
3970 # bce and msgr are repaired.
3971 gnome-rh90|GNOME Terminal,
3973 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3974 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3975 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3978 # GNOME Terminal 2.14.2 (Fedora Core 5)
3979 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3980 gnome-fc5|GNOME Terminal,
3982 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3983 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3985 # GNOME Terminal 2.18.1 (2007 snapshot)
3987 # For any "recent" version of gnome-terminal, it is futile to attempt to
3988 # support modifiers on cursor- and keypad keys because the program usually
3989 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3990 # of the keys (which more/less correspond to the termcap values), and will
3991 # interpret those according to the $TERM value, but others not in the
3992 # terminfo according to some constantly changing set of hacker guidelines -TD
3993 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
3994 use=xterm+pcc2, use=gnome-fc5,
3995 gnome-2007|GNOME Terminal snapshot 2.18.1,
3998 # GNOME Terminal 2.22.3 (2008 snapshot)
4000 # In vttest, it claims to be a vt220 with national replacement character-sets,
4001 # but aside from the identifier string, implements only a small fraction of
4002 # vt220's behavior, which will make it less usable on a VMS system (unclear
4003 # what the intent of the developer is, since the NRC feature exposed in vttest
4004 # by this change does not work).
4005 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4006 use=vte+pcfkeys, use=vte-2007,
4007 gnome-2008|GNOME Terminal snapshot 2.22.3,
4010 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4011 # supply key information which is not built into the program. With 2.22.3,
4012 # this list is built into the program (which addresses the inadvertant use of
4013 # random terminfo data, though using a set of values which does not correspond
4014 # to any that xterm produces - still not solving the problem that GNOME
4015 # terminal hardcodes the $TERM variable as "xterm").
4017 # terminfo modifier code keys
4018 # kf13-kf24 shift 2 F1 to F12
4019 # kf25-kf36 control 5 F1 to F12
4020 # kf37-kf48 shift/control 6 F1 to F12
4021 # kf49-kf60 alt 3 F1 to F12
4022 # kf61-kf63 shift-alt 4 F1 to F3
4024 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4025 # no parameters. This appears to be rote copying based on xterm+pcc0.
4026 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4027 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4028 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4029 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4030 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4031 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4032 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4034 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4037 vte|VTE aka GNOME Terminal,
4039 gnome|GNOME Terminal,
4042 # palette is hardcoded...
4043 vte-256color|VTE with xterm 256-colors,
4044 initc@, use=xterm+256color, use=vte,
4045 gnome-256color|GNOME Terminal with xterm 256-colors,
4048 # XFCE Terminal 0.2.5.4beta2
4050 # This is based on some of the same source code, e.g., the VTE library, as
4051 # gnome-terminal, but has fewer features, fails more screens in vttest.
4052 # Since most of the terminfo-related behavior is due to the VTE library,
4053 # the terminfo is the same as gnome-terminal.
4058 # Multi-Gnome-Terminal 1.6.2
4060 # This does not use VTE, and does have different behavior (compare xfce and
4062 mgt|Multi GNOME Terminal,
4063 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4066 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4067 # or not is debatable).
4070 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4073 # (formerly known as kvt)
4075 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4076 # simplify this entry (and point out why konsole isn't xterm), we base this on
4077 # xterm-r6. The default keyboard appears to be 'linux'.
4080 # a) konsole implements several features from XFree86 xterm, though none of
4081 # that is documented - except of course in its source code - apparently
4082 # because its implementors are unaccustomed to reading documentation - as
4083 # evidenced by the sparse and poorly edited documentation distributed with
4084 # konsole. Some features such as the 1049 private mode are recognized but
4085 # incorrectly implemented as a duplicate of the 47 private mode.
4086 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4087 # sends PC-style escapes rather than vt100.
4088 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4089 # parse some control sequences. Also fails vttest Primary Device Attributes
4090 # by sending a bogus code (in the source it says it's supposed to be a
4091 # vt220, which is doubly incorrect because it does not implement vt220
4092 # control sequences except for a few special cases). Treat it as a
4093 # mildly-broken vt102.
4095 # Update for konsole 1.3.2:
4096 # The 1049 private mode works (but see the other xterm screens in vttest).
4097 # Primary Device Attributes now returns the code for a vt100 with advanced
4098 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4100 # Updated for konsole 1.6.4:
4101 # add konsole-solaris
4103 # Updated for konsole 1.6.6:
4104 # add control-key modifiers for function-keys, etc.
4106 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4107 # different from xterm (and vt100's). They have the same behavior in this
4108 # detail, but it is unclear which copies the other.
4109 konsole-base|KDE console window,
4112 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4113 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4114 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
4115 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4116 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4117 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4118 rmso=\E[27m, rmul=\E[24m,
4119 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4120 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4121 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4122 use=ecma+color, use=xterm-r6,
4123 konsole-linux|KDE console window with linux keyboard,
4124 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
4125 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
4126 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4127 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4129 konsole-solaris|KDE console window with Solaris keyboard,
4130 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4131 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4132 # than testing the code.
4133 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4134 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4135 # The value for kbs reflects local customization rather than the settings used
4136 # for XFree86 xterm.
4137 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4138 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4140 # Konsole does not implement shifted cursor-keys.
4141 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4142 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4144 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4145 # it is still useful for deriving the other entries.
4146 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4147 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4148 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4149 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4150 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4151 khome=\E[H, use=konsole-base,
4152 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4153 kbs=^H, kdch1=\177, use=konsole-vt100,
4154 konsole-16color|klone of xterm-16color,
4155 ncv#32, use=ibm+16color, use=konsole,
4156 # make a default entry for konsole
4157 konsole|KDE console window,
4160 # palette is hardcoded...
4161 konsole-256color|KDE console window with xterm 256-colors,
4162 initc@, use=xterm+256color, use=konsole,
4165 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4167 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4170 # The function keys are numbered based on shift/control/alt modifiers, except
4171 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4172 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4173 # how it is configured.
4175 # kf1 to kf12 \E[11~ to \E[24~
4176 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4177 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4178 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4179 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4180 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4181 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4182 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4184 mlterm|multi lingual terminal emulator,
4185 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4186 colors#8, cols#80, it#8, lines#24, pairs#64,
4187 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4188 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4189 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4190 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4191 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4192 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4193 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4194 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4195 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4196 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4197 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4198 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4199 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4200 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4201 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4202 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4203 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4204 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4205 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4206 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4207 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4208 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4209 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4210 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4211 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4213 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4214 # looks in its termcap to decide which string to send. If it used terminfo
4215 # (when available), it could use the extended names introduced for xterm.
4216 mlterm+pcfkeys|fragment for PC-style fkeys,
4217 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4218 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4219 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4220 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4221 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4222 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4223 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4224 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4225 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4227 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4228 use=xterm+256color, use=rxvt,
4231 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4232 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4235 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4236 # but some applications don't work with that.
4237 # It also has an AIX extension
4241 # but the latter does not work correctly.
4243 # The distributed terminfo says it implements hpa and vpa, but they are not
4244 # implemented correctly, using relative rather than absolute positioning.
4246 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4247 # Since rxvt is not really compatible with xterm, it should be configured as
4248 # "rxvt" or "rxvt-color".
4250 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4251 # remove km as per tack test -TD
4252 rxvt-basic|rxvt terminal base (X Window System),
4253 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4254 cols#80, it#8, lines#24,
4255 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4256 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4257 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4258 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4259 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4260 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4261 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4262 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4263 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4264 ind=^J, is1=\E[?47l\E=\E[?1l,
4265 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4266 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4267 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4269 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4270 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4271 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4272 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4273 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4274 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4275 use=rxvt+pcfkeys, use=vt220+keypad,
4276 # Key Codes from rxvt reference:
4278 # Note: Shift + F1-F10 generates F11-F20
4280 # For the keypad, use Shift to temporarily override Application-Keypad
4281 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4282 # is off, escape sequences toggle Application-Keypad setting.
4283 # Also note that values of Home, End, Delete may have been compiled
4284 # differently on your system.
4286 # Normal Shift Control Ctrl+Shift
4287 # Tab ^I ESC [ Z ^I ESC [ Z
4288 # BackSpace ^H ^? ^? ^?
4289 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4290 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4291 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4292 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4293 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4294 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4295 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4296 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4297 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4298 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4299 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4300 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4301 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4302 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4303 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4304 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4305 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4306 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4307 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4308 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4309 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4310 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4311 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4312 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4313 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4314 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4315 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4316 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4317 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4320 # Up ESC [ A ESC [ a ESC O a ESC O A
4321 # Down ESC [ B ESC [ b ESC O b ESC O B
4322 # Right ESC [ C ESC [ c ESC O c ESC O C
4323 # Left ESC [ D ESC [ d ESC O d ESC O D
4324 # KP_Enter ^M ESC O M
4325 # KP_F1 ESC O P ESC O P
4326 # KP_F2 ESC O Q ESC O Q
4327 # KP_F3 ESC O R ESC O R
4328 # KP_F4 ESC O S ESC O S
4329 # XK_KP_Multiply * ESC O j
4330 # XK_KP_Add + ESC O k
4331 # XK_KP_Separator , ESC O l
4332 # XK_KP_Subtract - ESC O m
4333 # XK_KP_Decimal . ESC O n
4334 # XK_KP_Divide / ESC O o
4346 # The source-code for rxvt actually defines mappings for F21-F35, using
4347 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4348 # are rare, so this entry uses the shift- and control-modifiers as in
4349 # xterm+pcfkeys to define keys past F12.
4351 # kIC is normally not used, since rxvt performs a paste for that (shifted
4352 # insert), unless private mode 35 is set.
4354 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4355 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4356 rxvt+pcfkeys|fragment for PC-style fkeys,
4357 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4358 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4359 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4360 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4361 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4362 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4363 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4364 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4365 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4366 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4367 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4368 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4369 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4370 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4371 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4372 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4373 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4374 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4375 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4376 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4378 rxvt|rxvt terminal emulator (X Window System),
4380 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4381 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4382 rxvt-color|rxvt terminal emulator (X Window System),
4384 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4385 use=xterm+256color, use=rxvt,
4386 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4387 use=xterm+88color, use=rxvt,
4388 rxvt-xpm|rxvt terminal emulator (X Window System),
4390 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4391 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4393 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4394 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4397 # This variant is supposed to work with rxvt 2.7.7 when compiled with
4398 # NO_BRIGHTCOLOR defined. rxvt needs more work...
4399 rxvt-16color|xterm with 16 colors like aixterm,
4400 ncv#32, use=ibm+16color, use=rxvt,
4405 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4406 # makes its function-keys different from other flavors of rxvt -TD
4407 mrxvt|multitabbed rxvt,
4409 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4410 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4411 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4412 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4413 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4414 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4417 mrxvt-256color|multitabbed rxvt with 256 colors,
4418 use=xterm+256color, use=mrxvt,
4421 # From: Michael Jennings <mej@valinux.com>
4425 # removed kf0 which conflicts with kf10 -TD
4426 # remove cvvis which conflicts with cnorm -TD
4427 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4428 # but does otherwise follow the rxvt+pcfkeys model -TD
4429 # remove nonworking flash -TD
4430 # remove km as per tack test -TD
4431 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4432 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
4433 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4434 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4435 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4436 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4437 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4438 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4439 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4440 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4441 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4442 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4443 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4444 is1=\E[?47l\E>\E[?1l,
4445 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4446 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4447 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4448 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4449 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4450 rmso=\E[27m, rmul=\E[24m,
4451 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4452 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4454 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4455 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4456 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4457 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4460 Eterm-256color|Eterm with xterm 256-colors,
4461 use=xterm+256color, use=Eterm,
4463 Eterm-88color|Eterm with 88 colors,
4464 use=xterm+88color, use=Eterm,
4467 # Based on rxvt 2.4.8, it has a few differences in key bindings
4468 aterm|AfterStep terminal,
4470 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4474 # This is not based on xterm's source...
4475 # vttest shows several problems with keyboard, cursor-movements.
4476 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4477 xiterm|internationalized terminal emulator for X,
4479 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4483 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4484 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4485 # chars look like --esr)
4486 hpterm|X-hpterm|hp X11 terminal emulator,
4487 am, da, db, mir, xhp,
4488 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4489 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4490 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4491 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4492 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4493 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4494 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4495 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4496 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4497 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4498 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4499 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4500 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4501 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4502 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4504 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4505 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4506 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4507 # HPUX 11 provides a color version.
4508 hpterm-color|HP X11 terminal emulator with color,
4512 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4513 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4516 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4517 # It corresponds to emu's internal emulation:
4519 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4520 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4521 # fixes: add civis, cnorm, sgr -TD
4522 emu|emu native mode,
4523 am, bce, mir, msgr, xon,
4524 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4525 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4526 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4527 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4528 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
4529 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4530 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4531 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4532 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4533 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4534 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4535 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4536 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4537 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4538 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4539 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4540 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4541 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4543 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4544 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4546 # vt220 Terminfo entry for the Emu emulation, corresponds to
4548 # with NumLock set (to make the keypad transmit kf0-kf9).
4549 # fixes: add am, xenl, corrected sgr0 -TD
4550 emu-220|Emu-220 (vt200-7bit mode),
4552 cols#80, it#8, lines#24, vt#200,
4553 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4554 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4555 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4556 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4557 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4558 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4559 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4560 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4561 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4562 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4563 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4564 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4565 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4566 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4567 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4568 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4569 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4570 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4571 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4572 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4573 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4574 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4575 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4576 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4579 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4580 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4581 # indicate that it emulates more than one terminal, but incompletely.
4583 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4584 # It is based on vt102's entry, with some subtle differences, but also
4586 # supports ANSI colors (except for 'op' string)
4587 # apparently implements alternate screen like xterm
4588 # does not use padding, of course.
4589 mvterm|vv100|SwitchTerm aka mvTERM,
4590 am, eslok, hs, km, mir, msgr, xenl,
4591 colors#8, cols#80, it#8, lines#24, pairs#64,
4592 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4593 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4594 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4595 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4596 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4597 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4598 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4599 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4600 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4601 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4602 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4603 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4604 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4606 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4607 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4608 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4609 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4610 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4611 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4615 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4617 # "mterm -type ansi" sets $TERM to "ansi"
4618 mterm-ansi|ANSI emulation,
4621 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4622 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4623 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4624 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4625 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4626 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4627 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4628 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4629 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4630 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4632 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4633 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4635 # mterm normally sets $TERM to "mterm"
4636 mterm|mouse-sun|Der Mouse term,
4639 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4640 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4641 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4642 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4643 # "mterm -type decansi" sets $TERM to "decansi"
4645 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4646 decansi|ANSI emulation with DEC compatibility hacks,
4647 am, mir, msgr, xenl,
4648 colors#8, it#8, pairs#64,
4649 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4650 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4651 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4652 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4653 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4654 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4655 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4656 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4657 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4658 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4659 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4660 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4661 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4662 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4663 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4664 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4665 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4666 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4667 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4668 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4669 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4670 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4671 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4672 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4673 u7=\E[6n, vpa=\E[%i%p1%dd,
4677 # vwmterm is a terminal emulator written for the VWM console window manager
4680 am, bce, ccc, mir, msgr, npc, xenl, xon,
4682 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4683 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4684 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
4685 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
4686 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
4687 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
4688 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
4689 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4690 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
4691 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4692 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4693 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
4694 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
4695 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4696 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4697 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4698 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4702 # MGR is a Bell Labs window system lighter-weight than X.
4703 # These entries describe MGR's xterm-equivalent.
4704 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4707 mgr|Bellcore MGR (non X) window system terminal emulation,
4709 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4710 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4711 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4712 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4713 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4714 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4715 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4716 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4717 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4719 mgr-sun|Mgr window with Sun keyboard,
4720 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4721 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4722 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4723 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4724 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4725 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4726 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4727 mgr-linux|Mgr window with Linux keyboard,
4728 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4729 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4730 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4731 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4732 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4738 # Note: the original terminfo description uses leading blank to persuade
4739 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
4742 # Reading the code shows it should work for aixterm 16-colors
4743 # - added st-16color
4746 # - set eo (erase-overstrike)
4748 # - tbc doesn't work
4750 # - cbt doesn't work
4751 # - shifted cursor-keys send sequences like rxvt
4752 # - sgr referred to unimplemented "invis" mode.
4753 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
4754 simpleterm|st| simpleterm,
4755 am, eo, mir, msgr, ul, xenl,
4756 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
4757 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4758 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4759 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4760 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4761 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4762 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
4763 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
4764 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D,
4765 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4766 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
4767 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
4768 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4769 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
4770 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
4771 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4772 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
4773 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
4774 st-16color|simpleterm with 16-colors,
4775 use=ibm+16color, use=simpleterm,
4776 # 256 colors "works", but when running xterm's test-scripts, some garbage is
4777 # shown in the titlebar.
4778 st-256color|simpleterm with 256 colors,
4780 initc@, use=simpleterm, use=xterm+256color,
4783 # http://software.jessies.org/terminator/
4784 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
4785 # Debian/current -TD (2011/8/20)
4787 # There are some packaging problems:
4788 # a) using Java, the program starts off using 50Mb, and climbs from there,
4789 # up to 114Mb after testing (no scrollback).
4790 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
4791 # (two copies, just in case the host happens to be Mac OS X).
4792 # I deleted this after testing with tack.
4794 # Issues/features found with tack:
4795 # a) tbc does not work (implying that hts also is broken).
4796 # Comparing with the tabs utility shows a problem with the last tabstop on
4798 # b) has xterm-style shifted function-key strings
4799 # meta also is used, but control is ignored.
4800 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
4801 # d) some combinations of shift/control send xterm-style sequences for
4802 # insert/delete/home/end.
4803 # e) numeric keypad sends only numbers (compare with vttest).
4804 # f) meta mode (km) is not implemented.
4806 # Issues found with ncurses test-program:
4807 # a) bce is inconsistently implemented
4808 # b) widths of Unicode values above 256 do not always agree with wcwidth.
4810 # Checked with vttest, found low degree of compatibility there.
4812 # Checked with xterm's scripts, found that the 256-color palette is fixed.
4816 # b) corrected sgr0 to reset alternate character set
4817 # c) modified smacs/rmacs to use SCS rather than SI/SO
4820 terminator|Terminator no line wrap,
4821 eo, mir, msgr, xenl, xon,
4822 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
4823 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4824 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4825 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4826 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4827 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4828 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4829 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
4830 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
4831 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
4832 ind=^J, is1=\E[?47l\E=\E[?1l,
4833 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4834 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4835 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4836 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4837 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4838 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4839 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4840 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
4841 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
4842 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4843 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
4844 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
4845 setaf=\E[38;5;%p1%dm,
4846 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
4847 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
4848 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
4851 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4854 # Columbus UNIX virtual terminal. This terminal also appears in
4855 # UNIX 4.0 and successors as line discipline 1 (?), but is
4856 # undocumented and does not really work quite right.
4857 cbunix|cb unix virtual terminal,
4859 cols#80, lines#24, lm#0,
4860 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4861 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4862 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4863 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4864 smso=\Ea^D, smul=\Ea^A,
4865 # (vremote: removed obsolete ":nl@:" -- esr)
4866 vremote|virtual remote terminal,
4868 cols#79, use=cbunix,
4870 pty|4bsd pseudo teletype,
4871 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4872 smso=\Ea$, smul=\Ea!, use=cbunix,
4874 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4875 eterm|gnu emacs term.el terminal emulation,
4878 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4879 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4880 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4881 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4882 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4883 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4884 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4885 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4886 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4889 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4890 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4891 am, mir, msgr, xenl,
4892 colors#8, cols#80, lines#24, pairs#64,
4893 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4894 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4895 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4896 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4897 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4898 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4899 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4900 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4901 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4902 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4903 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4904 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4905 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4906 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4907 u6=\E[%i%d;%dR, u7=\E[6n,
4909 # Entries for use by the `screen' program by Juergen Weigert,
4910 # Michael Schroeder, Oliver Laumann. The screen and
4911 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4912 # come from University of Wisconsin and may be older.
4913 # (screen: added <cnorm> on ANSI model -- esr)
4915 # 'screen' defines extensions to termcap. Some are used in its terminal
4917 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4918 # AX (bool) Does understand ANSI set default fg/bg color
4919 # (\E[39m / \E[49m).
4920 # S0 (str) Switch charset 'G0' to the specified charset.
4921 # E0 (str) Switch charset 'G0' back to standard charset.
4923 # tested with screen 3.09.08
4924 screen|VT 100/ANSI X3.64 virtual terminal,
4925 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4926 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
4927 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4928 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4929 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4930 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4931 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4932 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4933 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4934 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4935 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4936 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4937 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4938 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4939 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4940 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4941 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4942 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4943 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4944 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4945 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4946 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4947 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4948 S0=\E(%p1%c, use=ecma+color,
4949 # The bce and status-line entries are from screen 3.9.13 (and require some
4950 # changes to .screenrc).
4951 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4954 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4955 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4957 # ======================================================================
4958 # Entries for GNU Screen with 16 colors.
4959 # Those variations permit to benefit from 16 colors palette, and from
4960 # bold font and blink attribute separated from bright colors. But they
4961 # are less portable than the generic "screen" 8 color entries: Their
4962 # usage makes real sense only if the terminals you attach and reattach
4963 # do all support 16 color palette.
4965 screen-16color|GNU Screen with 16 colors,
4966 use=ibm+16color, use=screen,
4968 screen-16color-s|GNU Screen with 16 colors and status line,
4969 use=ibm+16color, use=screen-s,
4971 screen-16color-bce|GNU Screen with 16 colors and BCE,
4972 use=ibm+16color, use=screen-bce,
4974 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
4975 bce, use=ibm+16color, use=screen-s,
4977 # ======================================================================
4978 # Entries for GNU Screen 4.02 with --enable-colors256.
4980 screen-256color|GNU Screen with 256 colors,
4982 initc@, use=xterm+256color, use=screen,
4984 screen-256color-s|GNU Screen with 256 colors and status line,
4986 initc@, use=xterm+256color, use=screen-s,
4988 screen-256color-bce|GNU Screen with 256 colors and BCE,
4990 initc@, use=xterm+256color, use=screen-bce,
4992 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
4994 initc@, use=xterm+256color, use=screen-s,
4996 # ======================================================================
4998 # Read the fine manpage:
4999 # When screen tries to figure out a terminal name for
5000 # itself, it first looks for an entry named "screen.<term>",
5001 # where <term> is the contents of your $TERM variable. If
5002 # no such entry exists, screen tries "screen" (or "screen-w"
5003 # if the terminal is wide (132 cols or more)). If even this
5004 # entry cannot be found, "vt100" is used as a substitute.
5006 # Notwithstanding the manpage, screen uses its own notion of the termcap
5007 # and some keys from "screen.<term>" are ignored. Here is an entry which
5008 # covers those (tested with screen 4.00.02) -TD
5009 screen+fkeys|function-keys according to screen,
5010 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5013 # Here are a few customized entries which are useful -TD
5016 # (a) screen does not support invis.
5017 # (b) screen's implementation of bw is incorrect according to tack.
5018 # (c) screen appears to hardcode the strings for khome/kend, making it
5019 # necessary to override the "use=" clause's values (screen+fkeys).
5020 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5021 # which is NOT the same as the terminfo screen.<term>.
5022 # (e) when screen finds one of these customized entries, it sets $TERM to
5023 # match. Hence, no "screen.xterm" entry is provided, since that would
5024 # create heartburn for people running remote xterm's.
5026 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5027 # since the default translations override the built-in keycode
5028 # translation. They are suppressed here to show what is tested by tack.
5029 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5031 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5032 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5033 use=screen+fkeys, use=xterm-new,
5034 # xterm-r6 does not really support khome/kend unless it is propped up by
5035 # the translations resource.
5036 screen.xterm-r6|screen customized for X11R6 xterm,
5037 bw, use=screen+fkeys, use=xterm-r6,
5038 # Color applications running in screen and TeraTerm do not play well together
5039 # on Solaris because Sun's curses implementation gets confused.
5040 screen.teraterm|disable ncv in teraterm,
5042 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5043 use=screen+fkeys, use=screen,
5045 screen.rxvt|screen in rxvt,
5047 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5048 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5049 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5050 screen.Eterm|screen in Eterm,
5051 use=screen+fkeys, use=Eterm,
5052 screen.mrxvt|screen in mrxvt,
5053 use=screen+fkeys, use=mrxvt,
5054 screen.vte|screen in any VTE-based terminal,
5055 use=screen+fkeys, use=vte,
5056 screen.gnome|screen in GNOME Terminal,
5057 use=screen+fkeys, use=gnome,
5058 screen.konsole|screen in KDE console window,
5059 use=screen+fkeys, use=konsole,
5060 # fix the backspace key
5061 screen.linux|screen in linux console,
5063 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5064 screen.mlterm|screen in mlterm,
5065 use=screen+fkeys, use=mlterm,
5067 # The default "screen" entry is reasonably portable, but not optimal for the
5068 # most widely-used terminal emulators. The "bce" capability is supported in
5069 # screen since 3.9.13, and when used, will require fewer characters to be sent
5070 # to the terminal for updates.
5072 # If you are using only terminals which support bce, then you can use this
5073 # feature in your screen configuration.
5075 # Adding these lines to your ".screenrc" file will allow using these customized
5080 screen-bce.xterm-new|screen optimized for modern xterm,
5082 ech@, use=screen.xterm-new,
5083 screen-bce.rxvt|screen optimized for rxvt,
5085 ech@, use=screen.rxvt,
5086 screen-bce.Eterm|screen optimized for Eterm,
5088 ech@, use=screen.Eterm,
5089 screen-bce.mrxvt|screen optimized for mrxvt,
5091 ech@, use=screen.mrxvt,
5092 screen-bce.gnome|screen optimized for GNOME-Terminal,
5094 ech@, use=screen.gnome,
5095 screen-bce.konsole|screen optimized for KDE console window,
5097 ech@, use=screen.konsole,
5098 screen-bce.linux|screen optimized for linux console,
5100 ech@, use=screen.linux,
5101 screen-bce.mlterm|screen optimized for mlterm,
5103 ech@, use=screen.mlterm,
5105 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5106 cols#132, use=screen,
5108 screen2|old VT 100/ANSI X3.64 virtual terminal,
5109 cols#80, it#8, lines#24,
5110 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5111 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5112 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5113 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5114 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5115 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5116 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5117 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5118 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5119 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5120 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5121 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5122 screen3|older VT 100/ANSI X3.64 virtual terminal,
5124 cols#80, it#8, lines#24,
5125 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5126 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5127 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5128 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5129 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5130 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5131 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5132 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5133 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5134 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5135 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5136 smul=\E[4m, tbc=\E[3g,
5138 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5139 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5140 # been maintained until recently by the National Center for Supercomputer
5141 # Applications, and it is feature rich, stable and free. It can be downloaded
5142 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5143 # xterm+sl, and the docs at NCSA. It works well.
5145 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5146 # The terminal options should be set as follows:
5147 # Xterm sequences ON
5148 # use VT wrap mode ON
5149 # use Emacs arrow keys OFF
5150 # CTRL-COMND is Emacs meta ON
5152 # answerback string: "ncsa-vt220-8"
5153 # setup keys: all disabled
5155 # Application mode is not used.
5157 # Other special mappings:
5164 # PAGEDOWN Next Screen
5166 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5169 # The status-line manipulation is a mapping of the xterm-compatible control
5170 # sequences for setting the window-title. So you must use tsl and fsl in
5171 # pairs, since the latter ends the string that is loaded to the window-title.
5172 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5173 am, hs, km, mir, msgr, xenl,
5174 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5175 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5176 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5180 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5181 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5182 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
5183 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
5184 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
5185 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5186 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5187 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
5188 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
5189 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
5190 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
5191 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
5192 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
5193 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
5194 rmso=\E[27m, rmul=\E[24m,
5195 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
5196 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5197 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
5198 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
5199 u8=\E[?62;1;6c, use=ansi+enq,
5200 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5201 use=ncsa-m, use=klone+color,
5202 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5204 dsl@, fsl@, tsl@, use=ncsa,
5205 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5207 dsl@, fsl@, tsl@, use=ncsa-m,
5209 # The documented function-key mapping refers to the Apple Extended Keyboard
5210 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
5211 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5212 # some keyboards and many applications require these as F1-F4.
5214 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
5215 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5216 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5217 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
5218 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
5219 kf8=\E[19~, kf9=\E[20~, use=ncsa,
5221 #### Pilot Pro Palm-Top
5223 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
5224 # http://www.ai/~iang/TGssh/
5225 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
5228 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
5229 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
5230 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
5233 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
5234 # These entries are for the Embeddable Linux Kernel System (ELKS)
5235 # project - an heavily stripped down Linux to be run on 16 bit
5236 # boxes or, eventually, to be used in embedded systems - and have been
5237 # adapted from the stock ELKS termcap. The project itself looks stalled,
5238 # and the latest improvements I know of date back to March 2000.
5240 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
5241 # as an added bonus, this deals with all the capabilities common to
5242 # both VT52 and ANSI (or, eventually, "special") modes.
5244 elks-glasstty|ELKS glass-TTY capabilities,
5246 cols#80, it#8, lines#25,
5247 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
5250 elks-vt52|ELKS vt52 console,
5251 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
5252 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
5253 home=\EH, use=elks-glasstty,
5255 elks-ansi|ELKS ANSI console,
5256 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5257 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5258 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5260 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
5261 # instead of VT52, but the "elks" entry still refers to the latter.
5263 elks|default ELKS console,
5266 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
5267 # one but in screen size
5269 sibo|ELKS SIBO console,
5270 cols#61, it#8, lines#20, use=elks-vt52,
5272 ######## COMMERCIAL WORKSTATION CONSOLES
5278 # This is from the OSF/1 Release 1.0 termcap file
5279 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
5282 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5283 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5284 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
5285 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
5286 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5291 # :is1: resets scrolling region in case a previous user had used "tset vt100"
5292 oldsun|Sun Microsystems Workstation console,
5293 OTbs, am, km, mir, msgr,
5294 cols#80, it#8, lines#34,
5295 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
5296 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5297 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5298 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5299 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5300 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
5301 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5302 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
5303 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
5304 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
5305 sun-il|Sun Microsystems console with working insert-line,
5308 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5309 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5310 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5311 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5312 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5313 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
5314 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
5315 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
5316 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
5317 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
5318 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
5319 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
5320 smso=\E[7m, u8=\E[1t, u9=\E[11t,
5321 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
5322 # flake out on the last line. Unfortunately, without them the terminal has no
5324 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
5325 il@, il1@, use=sun-il,
5326 # If you are using an SS5, change the sun definition to use sun-ss5.
5327 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
5330 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
5331 sun-s|Sun Microsystems Workstation window with status line,
5333 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5334 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
5336 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5337 sun-48|Sun 48-line window,
5338 cols#80, lines#48, use=sun,
5339 sun-34|Sun 34-line window,
5340 cols#80, lines#34, use=sun,
5341 sun-24|Sun 24-line window,
5342 cols#80, lines#24, use=sun,
5343 sun-17|Sun 17-line window,
5344 cols#80, lines#17, use=sun,
5345 sun-12|Sun 12-line window,
5346 cols#80, lines#12, use=sun,
5347 sun-1|Sun 1-line window for sysline,
5350 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5351 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
5352 ich1@, rmir@, smir@, use=sun,
5353 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
5355 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5356 sun-type4|Sun Workstation console with type 4 keyboard,
5357 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
5358 kcuu1=\E[215z, use=sun-il,
5360 # Most of the current references to sun-color are from users wondering why this
5361 # is the default on install. Details from reading the wscons manpage, adding
5362 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
5363 # when those were added -TD (2005-05-28)
5365 # According to wscons manpage, color is supported only on IA systems.
5366 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
5367 # does not list these. It also sets ncv#3, however that corresponds to
5368 # underline and standout.
5370 # Since the documentation and terminfo do not agree, see also current code at
5371 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
5373 # That (actually a different driver which "supports" sun-color) also supports
5380 # It supports bold, but not underline -TD (2009-09-19)
5381 sun-color|Sun Microsystems Workstation console with color support (IA systems),
5382 colors#8, ncv#3, pairs#64,
5383 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
5384 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm,
5386 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5387 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5388 smso=\E[1m, use=sun,
5393 # (wsiris: this had extension capabilities
5394 # :HS=\E7F2:HE=\E7F7:\
5395 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
5396 # See the note on Iris extensions near the end of this file.
5397 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
5398 # <flash> from BRL -- esr)
5399 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
5400 OTbs, OTnc, OTpt, am,
5401 OTkn#3, cols#80, it#8, lines#40,
5402 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
5403 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5404 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
5405 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
5406 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
5407 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
5408 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
5409 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
5414 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
5415 # environment). Note: these have nothing to do with Sony's News workstation
5419 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
5420 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
5421 psterm|psterm-basic|NeWS psterm-80x34,
5422 OTbs, am, hs, km, ul,
5423 cols#80, it#8, lines#34,
5424 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
5425 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
5426 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
5427 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
5428 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
5429 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
5430 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
5432 psterm-96x48|NeWS psterm 96x48,
5433 cols#96, lines#48, use=psterm,
5434 psterm-90x28|NeWS psterm 90x28,
5435 cols#90, lines#28, use=psterm,
5436 psterm-80x24|NeWS psterm 80x24,
5437 cols#80, lines#24, use=psterm,
5438 # This is a faster termcap for psterm. Warning: if you use this termcap,
5439 # some control characters you type will do strange things to the screen.
5440 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5441 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5442 OTbs, am, hs, km, ul,
5443 cols#80, it#8, lines#34,
5444 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5445 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5446 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5447 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5448 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5449 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5450 smso=^Oo, smul=^Ou, tsl=^Ol,
5454 # Use `glasstty' for the Workspace application
5457 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5460 cols#80, it#8, lines#24,
5461 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5462 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5463 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5464 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5465 nextshell|NeXT Shell application,
5468 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5471 #### Sony NEWS workstations
5474 # (news-unk: this had :KB=news: -- esr)
5475 news-unk|SONY NEWS vt100 emulator common entry,
5476 OTbs, OTpt, am, xenl,
5478 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5479 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5480 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5481 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5482 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5483 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5484 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5485 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5486 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5487 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5488 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5489 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5491 # (news-29: this had :TY=ascii: --esr)
5493 lines#29, use=news-unk,
5494 # (news-29-euc: this had :TY=euc: --esr)
5497 # (news-29-sjis: this had :TY=sjis: --esr)
5501 # (news-33: this had :TY=ascii: --esr)
5503 lines#33, use=news-unk,
5504 # (news-33-euc: this had :TY=euc: --esr)
5507 # (news-33-sjis: this had :TY=sjis: --esr)
5511 # (news-42: this had :TY=ascii: --esr)
5513 lines#42, use=news-unk,
5514 # (news-42-euc: this had :TY=euc: --esr)
5517 # (news-42-sjis: this had :TY=sjis: --esr)
5521 # NEWS-OS old termcap entry
5523 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
5524 news-old-unk|SONY NEWS vt100 emulator common entry,
5525 OTbs, OTpt, am, xenl,
5527 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5528 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5529 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5530 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5531 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5532 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5533 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5534 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5535 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5537 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5538 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5541 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5544 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5545 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5547 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5550 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
5551 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5554 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5557 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5558 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5561 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5564 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5565 # also the alias vt100-bm.
5566 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5569 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5572 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5573 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5576 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5579 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5580 news28|sony vt100 emulator 28 lines,
5583 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5586 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5587 news29|news28-a|sony vt100 emulator 29 lines,
5589 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5592 # (news511: this had :TY=sjis: --esr)
5593 nwp511|nwp-511|nwp-511 vt100,
5594 OTbs, OTpt, am, xenl,
5596 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5597 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5598 ed=\E[J$<30/>, el=\E[K$<3/>,
5599 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5600 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5601 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5602 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5603 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5604 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5605 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5606 # (news517: this had :TY=sjis:. --esr)
5607 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5610 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5611 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5612 tsl=\E[1$}\E[;%df, use=vt200,
5613 # (news517-w: this had :TY=sjis:. --esr)
5614 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5617 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5618 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5619 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5620 tsl=\E[1$}\E[;%df, use=vt200,
5622 #### Common Desktop Environment
5625 # This ships with Sun's CDE in Solaris 2.5
5626 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5627 dtterm|CDE desktop terminal,
5628 am, mir, msgr, xenl, xon,
5629 cols#80, it#8, lines#24, lm#0, ncv@,
5630 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5631 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5632 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5633 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5634 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5635 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5636 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5637 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5638 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5639 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5640 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5641 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5642 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5643 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5644 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5645 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5646 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5647 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5648 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5649 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5651 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5652 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5653 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5655 #### Non-Unix Consoles
5658 #### EMX termcap.dat compatibility modes
5660 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5661 # no_color_video to inform the application that standout(1), underline(2)
5662 # reverse(4) and invisible(64) don't work with color.
5663 emx-base|DOS special keys,
5666 bel=^G, use=ansi.sys,
5668 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5669 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5670 # names longer than 14 characters, the nominal maximum).
5672 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5673 ansi-emx|ANSI.SYS color,
5674 am, bce, eo, mir, msgr, xon,
5675 colors#8, cols#80, it#8, lines#25, pairs#64,
5676 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5677 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5678 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5679 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5680 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5681 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5682 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5683 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5684 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5685 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5686 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5687 u9=\E[c, use=emx-base,
5688 # nice colors for Emacs (white on blue, mode line white on cyan)
5689 ansi-color-2-emx|ANSI.SYS color 2,
5690 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5691 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5692 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5693 smul=\E[1;36;44m, use=ansi-emx,
5694 # nice colors for Emacs (white on black, mode line black on cyan)
5695 ansi-color-3-emx|ANSI.SYS color 3,
5696 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5697 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5698 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5699 smul=\E[0;36;40m, use=ansi-emx,
5700 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5702 cols#80, it#8, lines#24,
5703 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5704 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5705 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5706 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5707 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5708 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5711 # Use this for cygwin32 (tested with beta 19.1)
5712 # underline is colored bright magenta
5713 # shifted kf1-kf12 are kf11-kf22
5714 cygwinB19|ansi emulation for cygwin32,
5715 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5716 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5717 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5718 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5719 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5720 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5721 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5724 # Use this for cygwin (tested with version 1.1.0).
5725 # I've combined pcansi and linux. Some values of course were different and
5726 # I've indicated which of these were and which I used.
5727 # Cheers, earnie_boyd@yahoo.com
5728 # several changes based on running with tack and comparing with older entry -TD
5729 # more changes from csw:
5731 # remove eo [erase overstrike with blank]
5732 # change clear was \E[H\E[J now \E[2J (faster?)
5735 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5737 # add cub [cursor back param]
5738 # add cuf [cursor forward param]
5739 # add cuu [cursor up param]
5740 # add cud [cursor down param]
5741 # add hs [has status line]
5742 # add fsl [return from status line]
5743 # add tsl [go to status line]
5744 # add smacs [Start alt charset] (not sure if this works)
5745 # add rmacs [End alt charset] (ditto)
5746 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5747 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5748 # add kb2 [center of keypad]
5749 # add u8 [user string 8] \E[?6c
5750 # add el [clear to end of line] \E[K
5752 # cnorm [make cursor normal] not implemented
5753 # flash [flash] not implemented
5754 # blink [blink] not implemented very usefully in cygwin? \E[5m
5755 # dim [dim] not implemented very usefully in cygwin? \E[2m
5756 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5757 # kNXT [shifted next key] not implemented
5758 # kPRV [shifted prev key] not implemented
5759 # khome [home key] really is \E[1~ NOT \E[H
5760 # tbc [clear tab stops] not implemented
5761 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5762 # smpch [Start PC charset] is \E[11m, same as smacs
5763 # rmpch [End PC charset] is \E[10m, same as rmacs
5764 # mir [move in insert mode] fails in tack?
5765 # bce [back color erase] causes problems with change background color?
5766 # cvvis [make cursor very visible] causes a stackdump when testing with
5767 # testcurs using the output option? \E[?25h\E[?8c
5768 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5769 # ech [erase characters param] broken \E[%p1%dX
5770 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5773 # Remove cbt since it does not work in current cygwin
5774 # Add 'mir' and 'in' flags based on tack
5775 cygwin|ansi emulation for Cygwin,
5776 am, hs, mir, msgr, xon,
5777 colors#8, it#8, pairs#64,
5778 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5779 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5780 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5781 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5782 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5783 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5784 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5785 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5786 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5787 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5788 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5789 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5790 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5791 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5792 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5793 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5794 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5795 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5796 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5797 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5798 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5799 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5800 vpa=\E[%i%p1%dd, use=vt102+enq,
5802 # I've supplied this so that you can help test new values and add other
5803 # features. Cheers, earnie_boyd@yahoo.com.
5805 # Some features are from pcansi. The op value is from linux. Function-keys
5806 # are from linux. These have been tested not to cause problems. xenl was in
5807 # this list, but DOES cause problems so it has been removed
5808 cygwinDBG|Debug Version for Cygwin,
5809 am, eo, mir, msgr, xon,
5810 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5811 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5812 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5813 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5814 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5815 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5816 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5817 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5818 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5819 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5820 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5821 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5822 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5823 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5824 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5825 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5826 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5827 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5828 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5829 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5830 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5832 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5833 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5834 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5837 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5838 # encodings used by other x86 environments. All others are invented for DJGPP.
5839 # Oddly enough, while several combinations of modifiers are tabulated, there is
5840 # none for shifted cursor keys.
5892 # Ctrl-Delete \E[43~
5893 # Ctrl-Down Arrow \E[38~
5896 # Ctrl-Insert \E[42~
5897 # Ctrl-Left Arrow \E[39~
5898 # Ctrl-Page Down \E[46~
5899 # Ctrl-Page Up \E[45~
5900 # Ctrl-Right Arrow \E[40~
5901 # Ctrl-Up Arrow \E[37~
5917 # Alt-Down Arrow \E[60~
5921 # Alt-Left Arrow \E[61~
5922 # Alt-Page Down \E[68~
5923 # Alt-Page Up \E[67~
5924 # Alt-Right Arrow \E[62~
5925 # Alt-Up Arrow \E[59~
5954 djgpp|ansi emulation for DJGPP alpha,
5955 am, bce, msgr, xhp, xon, xt,
5956 colors#8, it#8, pairs#64,
5957 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5958 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5959 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5960 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5961 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5962 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5963 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5964 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5965 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5966 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5967 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5968 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5969 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5970 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5971 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5972 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5973 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5974 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5975 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5977 djgpp203|Entry for DJGPP 2.03,
5979 cols#80, it#8, lines#25,
5980 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5983 djgpp204|Entry for DJGPP 2.04,
5985 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5986 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5987 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5988 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5989 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5990 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5991 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5992 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5993 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5994 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5995 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5996 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5997 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5998 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5999 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6000 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6002 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6003 # buggy. Another odd bug appears when displaying "~" in alternate character
6004 # set (the emulator spits out error messages). Compare with att6386 -TD
6005 uwin|U/Win 3.2 console,
6006 am, eo, in, msgr, xenl, xon,
6007 colors#8, it#8, ncv#58, pairs#64,
6008 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6009 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6010 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6011 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6012 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6013 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6014 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6015 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6016 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6017 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6018 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6019 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6020 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6021 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6022 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6023 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6025 # This entry fits the Windows NT console when the _POSIX_TERM environment
6026 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6027 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6028 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6029 # systems is not, and (surprise!) they match very well.
6031 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6032 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6033 # are the installation instructions a pile of mind-numbing bureaucratese,
6034 # but the termcap entry is actually broken and unusable as given; the :do:
6035 # capability is misspelled "d".
6037 # To use this, you need to a bunch of environment variables:
6039 # SET _POSIX_TERM=on
6041 # SET TERMCAP=location of termcap file in POSIX file format
6042 # which is case-sensitive.
6043 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6046 # Important note: setting the TMP environment variable in POSIX style renders
6047 # it incompatible with a lot of other applications, including Visual C++. So
6048 # you should have a separate command window just for vi. All the other
6049 # variables may be permanently set in the Control Panel\System applet.
6051 # You can find out more about the restrictions of this facility at
6052 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6054 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6055 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6057 cols#80, it#8, lines#25,
6058 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6059 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6060 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6061 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6062 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6063 # From: jew@venus.sunquest.com
6064 # Date: 19 Feb 93 23:41:07 GMT
6065 # Here's a combination of ansi and vt100 termcap
6066 # entries that works nearly perfectly for me
6067 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6068 pcmw|PC running Microsoft Works,
6070 cols#80, it#8, lines#24, vt#3,
6071 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6072 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6073 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6074 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6075 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6076 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6077 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6078 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6079 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6080 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6081 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6084 # From: Federico Bianchi
6085 # This is the entry for the OpenNT terminal.
6086 # The ntconsole name is for backward compatability.
6087 # This is for OpenNT 2.0 and later.
6088 # Later OpenNT was renamed to Interix.
6090 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6091 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6092 # the documentation dates from 1.9.9e) -TD
6094 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6096 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6097 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6098 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6099 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6100 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6101 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6102 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6103 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6104 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6105 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6106 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6107 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6108 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6109 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6110 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6111 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6112 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6113 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6114 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6115 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6116 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6117 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6118 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6119 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6120 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6121 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6122 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6123 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6125 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6126 lines#35, use=opennt,
6128 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6129 lines#50, use=opennt,
6131 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6132 lines#60, use=opennt,
6134 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6135 lines#100, use=opennt,
6137 # OpenNT wide terminals
6138 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6139 cols#125, use=opennt,
6141 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6142 lines#35, use=opennt-w,
6144 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6145 lines#50, use=opennt-w,
6147 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6148 lines#60, use=opennt-w,
6150 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6151 cols#132, use=opennt,
6153 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6154 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6155 rmcup@, smcup@, use=opennt,
6157 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6158 lines#35, use=opennt-nti,
6160 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6161 lines#50, use=opennt-nti,
6163 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6164 lines#60, use=opennt-nti,
6166 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6167 lines#100, use=opennt-nti,
6169 ######## COMMON TERMINAL TYPES
6171 # This section describes terminal classes and maker brands that are still
6172 # quite common, but have proprietary command sets not blessed by ANSI.
6177 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
6178 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
6179 # Acer has a web site at http://www.acer.com.
6181 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
6182 # His comments suggest they were shipped with the system.
6185 # (altos2: had extension capabilities
6186 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6187 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6188 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6189 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6190 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6191 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
6192 # :HL=^AP\r:SP=\E[i:\
6193 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
6194 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
6195 # Comparison with the k* capabilities makes it obvious that the c* things are
6196 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
6197 # :sr: was given as a boolean-- esr)
6198 altos2|alt2|altos-2|altos II,
6199 cols#80, it#8, lines#24, xmc#0,
6200 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
6201 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
6202 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
6203 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
6204 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
6205 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
6206 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
6207 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6208 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6209 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6210 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6211 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
6212 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
6213 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
6214 # (altos3: had extension capabilities
6215 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6216 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6217 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6218 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6219 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6220 # :HL=^AP\r:SP=\E[i:\
6221 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
6222 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
6223 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6224 altos4|alt4|altos-4|altos IV,
6226 # (altos7: had extension capabilities:
6227 # :GG#0:GI=\EH8:GF=\EH7:\
6228 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6229 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6230 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6231 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6232 # Comparison with the k* capabilities makes it obvious that the c* things are
6233 # shift keys. I have renamed them to keys 32 and up accordingly. I have
6234 # also made this entry relative to adm12 in order to give it an <sgr>. The
6235 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
6236 altos7|alt7|altos VII,
6238 cols#80, lines#24, xmc#0,
6239 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
6240 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6241 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6242 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
6244 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
6245 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
6246 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
6247 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6248 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6249 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6250 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6251 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
6252 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
6253 rmir=\Er, smir=\Eq, use=adm+sgr,
6254 altos7pc|alt7pc|altos PC VII,
6255 kend=\ET, use=altos7,
6257 #### Hewlett-Packard (hp)
6260 # 8000 Foothills Blvd
6261 # Roseville, CA 95747
6262 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
6263 # 1-(800)-633-3600 (General customer support)
6266 # As of March 1998, HP no longer has any terminals in production.
6267 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
6268 # supported (they still have parts). So are the 2392a and 2394a.
6269 # See the WORKSTATION CONSOLES section for the 700s.
6272 # Generic HP terminal - this should (hopefully) work on any HP terminal.
6273 hpgeneric|hp|hewlett-packard generic terminal,
6274 OTbs, OTpt, am, da, db, mir, xhp,
6275 cols#80, lines#24, lm#0, vt#6,
6276 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6277 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
6278 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6279 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
6280 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6283 hp110|hewlett-packard model 110 portable,
6284 lines#16, use=hpgeneric,
6286 hp+pfk+cr|hp function keys with CR,
6287 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
6288 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
6290 hp+pfk-cr|hp function keys w/o CR,
6291 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6294 # The hp2621s use the same keys for the arrows and function keys,
6295 # but not separate escape sequences. These definitions allow the
6296 # user to use those keys as arrow keys rather than as function
6298 hp+pfk+arrows|hp alternate arrow definitions,
6299 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
6300 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
6301 kll=\Eq\r, kri=\Es\r,
6303 hp+arrows|hp arrow definitions,
6304 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6305 kind=\ES, kll=\EF, kri=\ET,
6307 # Generic stuff from the HP 262x series
6309 hp262x|HP 262x terminals,
6311 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
6312 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6313 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6314 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
6315 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6316 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
6317 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
6319 # Note: no <home> on HPs since that homes to top of memory, not screen.
6320 # Due to severe 2621 braindamage, the only way to get the arrow keys to
6321 # transmit anything at all is to turn on the function key labels
6322 # with <smkx>, and even then the user has to hold down shift!
6323 # The default 2621 turns off the labels except when it has to to
6324 # enable the function keys. If your installation prefers labels
6325 # on all the time, or off all the time (at the "expense" of the
6326 # function keys), use 2621-nl or 2621-wl.
6328 # Note: there are newer ROMs for 2621's that allow you to set
6329 # strap A so the regular arrow keys xmit \EA, etc, as with the
6330 # 2645. However, even with this strap set, the terminal stops
6331 # xmitting if you reset it, until you unset and reset the strap!
6332 # Since there is no way to set/unset the strap with an escape
6333 # sequence, we don't use it in the default.
6334 # If you like, you can use 2621-ba (brain-damaged arrow keys).
6335 hp2621-ba|2621 w/new rom and strap A set,
6336 rmkx@, smkx@, use=hp+arrows, use=hp2621,
6338 # hp2621 with function labels. Most of the time they are off,
6339 # but inside vi, the function key labels appear. You have to
6340 # hold down shift to get them to xmit.
6341 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
6342 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6346 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
6347 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
6348 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
6349 use=hp+pfk+cr, use=hpgeneric,
6351 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6352 hp2621p|hp 2621 with printer,
6353 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6355 hp2621p-a|hp2621p with fn as arrows,
6356 use=hp+pfk+arrows, use=hp2621p,
6358 # hp2621 with k45 keyboard
6359 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
6360 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
6361 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6363 # 2621 using all 48 lines of memory, only 24 visible at any time.
6364 hp2621-48|48 line 2621,
6366 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
6369 # 2621 with no labels ever. Also prevents vi delays on escape.
6370 hp2621-nl|hp 2621 with no labels,
6371 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
6374 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
6377 hp2621-nt|hp 2621 w/no tabs,
6380 # Hp 2624 B with 4 or 10 pages of memory.
6382 # Some assumptions are made with this entry. These settings are
6383 # NOT set up by the initialization strings.
6385 # Port Configuration
6390 # Terminal Configuration
6396 # Note: the 2624 DOES have a true <home>, believe it or not!
6398 # The 2624 has an "error line" to which messages can be sent.
6399 # This is CLOSE to what is expected for a "status line". However,
6400 # after a message is sent to the "error line", the next carriage
6401 # return is EATEN and the "error line" is turned back off again!
6402 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
6404 # This entry supports emacs (and any other program that uses raw
6405 # mode) at 4800 baud and less. I couldn't get the padding right
6408 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
6409 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
6412 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
6413 use=hp+labels, use=scrhp,
6415 # This hp2626 entry does not use any of the fancy windowing stuff
6418 # Indeed, terminfo does not yet handle such stuff. Since changing
6419 # any window clears memory, it is probably not possible to use
6420 # this for screen opt.
6422 # ed is incredibly slow most of the time - I am guessing at the
6423 # exact padding. Since the terminal uses xoff/xon this is intended
6424 # only for cost computation, so that the terminal will prefer el
6425 # or even dl1 which is probably faster!
6427 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
6428 # extra slow on the last line of the window.
6430 # The padding probably should be changed.
6432 hp2626|hp2626a|hp2626p|hp 2626,
6435 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6436 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
6437 use=hp+labels, use=scrhp,
6439 # This entry is for sysline. It allocates a 23 line window with
6440 # a 115 line workspace for regular use, and a 1 line window for
6443 # This assumes port 2 is being used.
6444 # Turn off horizontal line, Create ws #1 with 115 lines,
6445 # Create ws #2 with 1 line, Create window #1 lines 1-23,
6446 # Create window #2 lines 24-24, Attach cursor to workspace #1.
6447 # Note that this clears the tabs so it must be done by tset before
6450 hp2626-s|hp 2626 using only 23 lines,
6453 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6454 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6455 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6456 # Force terminal back to 24 lines after being 23.
6457 hp2626-ns|hp 2626 using all 24 lines,
6458 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6460 # Various entries useful for small windows on 2626.
6461 hp2626-12|hewlett-packard 2626 12 lines,
6462 lines#12, use=hp2626,
6463 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6464 cols#40, lines#12, use=hp2626,
6465 hp2626-x40|hewlett-packard 2626 40 columns,
6466 cols#40, use=hp2626,
6467 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6468 lines#11, use=hp2626-s,
6471 # hp2627 color tubes from University of Wisconsin
6473 hp2627a-rev|hp 2627 with reverse video colors,
6474 cr=^M, cud1=^J, ht=^I, ind=^J,
6475 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6476 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6477 smul=\E&dD\E&v1S, use=hp2621-nl,
6478 hp2627a|hp 2627 color terminal with no labels,
6479 cr=^M, cud1=^J, ht=^I, ind=^J,
6480 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6481 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6482 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6484 hp2627c|hp 2627 color (cyan) terminal with no labels,
6485 cr=^M, cud1=^J, ht=^I, ind=^J,
6486 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6487 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6489 # hp2640a doesn't have the Y cursor addressing feature, and C is
6490 # memory relative instead of screen relative, as we need.
6493 cup@, rmkx@, smkx@, use=hp2645,
6495 hp2640b|hp2644a|hp 264x series,
6496 rmkx@, smkx@, use=hp2645,
6498 # (hp2641a: removed unknown :gu: -- esr)
6499 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6500 am, da, db, mir, xhp,
6502 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6503 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6504 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6505 if=/usr/share/tabset/std, il1=\EL, ind=^J,
6506 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6507 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6510 # This terminal should be used at 4800 baud or less. It needs padding for
6511 # plain characters at 9600, I guessed at an appropriate cr delay. It really
6512 # wants ^E/^F handshaking, but that doesn't work well even if you write
6513 # software to support it.
6514 hp2645|hp45|HP 2645 series,
6516 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6517 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6518 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6519 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6521 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6522 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6523 # You should use this terminal at 4800 baud or less.
6524 hp2648|hp2648a|HP 2648a graphics terminal,
6525 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6526 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6528 # The HP 150 terminal is a fairly vanilla HP terminal, with the
6529 # clreol standout problem. It also has graphics capabilities and
6530 # a touch screen, which we don't describe here.
6531 hp150|hewlett packard Model 150,
6534 # HP 2382a terminals, "the little ones." They don't have any
6535 # alternate character set support and sending out ^N/^O will
6536 # leave the screen blank.
6537 hp2382a|hp2382|hewlett packard 2382a,
6541 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6543 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6544 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6546 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6547 use=hp+pfk+arrows, use=hp2621-fl,
6549 # newer hewlett packard terminals
6551 newhpkeyboard|generic entry for HP extended keyboard,
6552 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6553 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6554 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6555 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6558 newhp|generic entry for new hewlett packard terminals,
6559 am, bw, mir, xhp, xon,
6560 cols#80, lines#24, pb#4800,
6561 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6562 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6563 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6564 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6565 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6566 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6567 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6568 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6569 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6570 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6571 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6572 tbc=\E3, use=newhpkeyboard,
6574 memhp|memory relative addressing for new HP ttys,
6576 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6577 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6578 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6579 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6581 scrhp|screen relative addressing for new HP ttys,
6582 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6583 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6584 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6585 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6586 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6588 # (hp+labels: added label values from a BRL termcap -- esr)
6589 hp+labels|"standard" label info for new HP ttys,
6591 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6592 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6593 rmln=\E&j@, smln=\E&jB,
6595 hp+printer|"standard" printer info for HP ttys,
6596 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6599 # The new hp2621b is kind of a cross between the old 2621 and the
6600 # new 262x series of machines. It has dip-switched options.
6601 # The firmware has a bug in it such that if you give it a null
6602 # length label, the following character is eaten!
6603 hp2621b|hp 2621b with old style keyboard,
6604 lh#1, lm#48, lw#8, nlab#8,
6605 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6606 kind=\ET, kll=\EF, kri=\ES,
6607 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6608 smln=\E&jB, use=hp2621,
6610 hp2621b-p|hp 2621b with printer,
6611 use=hp+printer, use=hp2621b,
6613 # hp2621b - new 2621b with new extended keyboard
6614 # these are closer to the new 26xx series than the other 2621b
6615 hp2621b-kx|hp 2621b with extended keyboard,
6616 use=newhpkeyboard, use=hp2621b,
6618 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6619 use=hp+printer, use=hp2621b-kx,
6621 # Some assumptions are made in the following entries.
6622 # These settings are NOT set up by the initialization strings.
6624 # Port Configuration
6625 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6627 # Terminal Configuration
6628 # InhHndShk(G)=Yes InhDC2(H)=Yes
6629 # XmitFnctn(A)=No InhEolWrp=No
6632 # Hp 2622a & hp2623a display and graphics terminals
6634 hp2622|hp2622a|hp 2622,
6637 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
6639 # The 2623 is a 2622 with extra graphics hardware.
6640 hp2623|hp2623a|hp 2623,
6643 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6644 use=hp+printer, use=hp2624,
6646 # The hewlett packard B can have an optional extra 6 pages of memory.
6647 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6650 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6651 lm#240, use=hp2624b-p,
6653 # Color manipulations for HP terminals
6654 hp+color|hp with colors,
6656 colors#16, ncv#17, pairs#7,
6657 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6658 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6659 op=\E&v0S, scp=\E&v%p1%dS,
6661 # <is2> sets the screen to be 80 columns wide
6662 hp2397a|hp2397|hewlett packard 2397A color terminal,
6663 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6665 # HP 700/44 Setup parameters:
6666 # Terminal Mode HP-PCterm
6667 # Inhibit Auto Wrap NO
6668 # Status Line Host Writable
6669 # PC Character Set YES
6670 # Twenty-Five Line Mode YES
6671 # XON/XOFF @128 or 64 (sc)
6672 # Keycode Mode NO or YES (sc)
6673 # Backspace Key BS or BS/DEL
6675 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6676 # \E\\? does not turn off keycode mode
6677 # <smsc> sets alternate start/stop; keycode on
6678 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6681 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6682 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6683 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6684 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6685 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6687 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6688 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6689 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6690 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6691 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6692 kpp=\E[5~, rmam=\E[?7l,
6693 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6694 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6695 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6696 smul=\E[4m, xoffc=g, xonc=e,
6698 # (hp2392: copied <rmir> here from hpex -- esr)
6701 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6702 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6703 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6704 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6707 hpsub|hp terminals -- capability subset,
6708 am, da, db, mir, xhp, xon,
6710 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6711 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6712 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6713 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6714 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6715 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6718 # May be used for most 24 x 80 hp terminals,
6719 # but has no padding added, so may allow runover in some terminals at high
6720 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6721 # hp98x5 terminal emulators or hp98x6 consoles.
6722 # Adds xy-cursor addressing, vertical cursor addressing, home,
6723 # last line, and underline capabilities.
6725 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6726 # moved <rmir> here from hpsub -- esr)
6727 hpex|hp extended capabilites,
6728 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6729 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6730 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6732 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6733 hp2|hpex2|hewlett-packard extended capabilities newer version,
6734 am, da, db, mir, xhp,
6735 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6736 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6737 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6738 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6739 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6740 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6741 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6742 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6743 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6744 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6745 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6746 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6747 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6748 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6749 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6750 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6751 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6752 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6755 # From: <ddavis@ic.berkeley.edu>
6756 hp236|hp236 internal terminal emulator,
6759 clear=\EF, cnorm=\EDE, cub1=^H,
6760 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6761 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6762 sgr0=\ECI, smso=\EBI,
6764 # This works on a hp300 console running Utah 4.3 BSD
6765 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6766 hp300h|HP Catseye console,
6767 OTbs, am, da, db, mir, xhp,
6768 cols#128, lines#51, lm#0, xmc#0,
6769 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6770 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6771 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6772 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6773 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6774 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6775 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6777 # From: Greg Couch <gregc@ernie.berkeley.edu>
6778 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6779 OTbs, am, da, db, mir, xhp,
6780 cols#128, it#8, lines#46, lm#0,
6781 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6782 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6783 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6784 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6785 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6786 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6787 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6788 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6789 tbc=\E3, vpa=\E&a%p1%dY,
6790 # HP 9845 desktop computer from BRL
6791 # (hp9845: removed unknown capability :gu: -- esr)
6793 OTbs, am, da, db, eo, mir, xhp,
6795 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6796 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6797 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
6798 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6799 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6800 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6801 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6802 hp98550|hp98550a|HP 9000 Series 300 color console,
6803 OTbs, am, da, db, mir, xhp,
6804 cols#128, it#8, lines#49, lm#0,
6805 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6806 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6807 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6808 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6809 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6810 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6811 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6812 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6813 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6814 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6815 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6816 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6817 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6818 # From: Victor Duchovni <vic@fine.princeton.edu>
6819 # (hp700-wy: removed obsolete ":nl=^J:";
6820 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6821 hp700-wy|HP700/41 emulating wyse30,
6822 OTbs, am, bw, mir, msgr,
6823 cols#80, it#8, lines#24, xmc#1,
6824 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6825 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6826 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6827 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6828 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6829 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6830 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6831 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6832 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6833 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6834 hp70092|hp70092a|hp70092A|HP 700/92,
6836 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6837 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6838 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6839 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6840 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6841 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6842 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6843 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6844 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6845 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6846 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6847 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6848 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6849 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6851 bobcat|sbobcat|HP 9000 model 300 console,
6852 am, da, db, mir, xhp,
6853 cols#128, it#8, lines#47, xmc#0,
6854 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6855 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6856 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6857 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6858 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6859 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6860 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6861 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6862 lines#94, use=gator,
6863 gator|HP 9000 model 237 emulating AAA,
6865 cols#128, it#8, lines#47,
6866 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6867 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6868 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6869 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6870 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6871 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6872 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6873 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6874 gator-52|HP 9000 model 237 emulating VT52,
6875 cols#128, lines#47, use=vt52,
6876 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6877 lines#94, use=gator-52,
6881 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6884 # Honeywell Bull terminal. Its cursor and function keys send single
6885 # control characters and it has standout/underline glitch. Most programs
6886 # do not like these features/bugs. Visual bell is realized by flashing the
6887 # "keyboard locked" LED.
6888 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6890 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6891 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6892 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6893 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6894 dku7003|Honeywell Bull DKU 7003 all features described,
6897 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6898 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6901 #### Lear-Siegler (adm)
6903 # These guys are long since out of the terminals business, but
6904 # in 1995 many current terminals still have an adm type as one of their
6905 # emulations (usually their stupidest, and usually labeled adm3, though
6906 # these `adm3' emulations normally have adm3a+ capabilities).
6908 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6909 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6910 # was being held to ground would trigger a send of the top line on the screen.
6911 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6912 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6913 # for clearing up this point.)
6915 adm1a|adm1|lsi adm1a,
6918 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6919 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6924 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6925 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6926 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6927 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6928 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6932 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6933 # The following ADM-3A switch settings are assumed for normal operation:
6934 # SPACE U/L_DISP CLR_SCRN 24_LINE
6935 # CUR_CTL LC_EN AUTO_NL FDX
6936 # Other switches may be set for operator convenience or communication
6937 # requirements. I recommend
6938 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6940 # Most of these terminals required an option ROM to support lower case display.
6941 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6942 # socket, you may be out of luck.
6944 # (adm3a: some capabilities merged in from BRl entry -- esr)
6948 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6949 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6950 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6954 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6957 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6958 rmso=\EG, smso=\EG, use=adm3a+,
6959 # A lot of terminals other than adm11s use these. Wherever you see
6960 # use=adm+sgr with some of its capabilities disabled, try the
6961 # disabled ones. They may well work but not have been documented or
6962 # expressed in the using entry. We'd like to cook up an <sgr> but the
6963 # <rmacs>/<smacs> sequences of the using entries vary too much.
6964 adm+sgr|adm style highlight capabilities,
6965 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6966 smso=\EG4, smul=\EG8,
6967 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6968 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6969 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
6970 # be ^Z, according to his entry.
6971 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
6972 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
6975 OTkn#8, cols#80, lines#24,
6976 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6977 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6978 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6979 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6980 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6981 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6983 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6984 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6985 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6986 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
6987 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6988 # via BRL. That entry asserted <xmc#1>, but I've left that out because
6989 # neither earlier nor later ADMSs have it -- esr)
6991 # You will need to get into the supervisor setup before you can set
6992 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6993 # see a lot more setup options.
6995 # While in supervisor setup you can also use following codes:
6997 # Ctrl-P Personality character selections (configure for example what
6998 # arrow keys send, if I recall correctly)
6999 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7000 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7001 # Ctrl-B Binary setup (probably not needed. I think that everything can
7002 # be set using normal setup)
7003 # Ctrl-A Answerback mode (enter answerback message)
7004 # Ctrl-U User friendly mode (normal setup)
7005 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7006 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7007 # Ctrl-R Reads both setup and functions keys from NVM.
7008 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7010 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7011 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7012 # bps works fine with hardware flow control.
7014 # The following null-modem cable should fix this and enable you to use
7015 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7016 # set ADM-12+ for DTR handshaking from supervisor setup.
7029 OTbs, OTpt, am, mir,
7030 OTug#1, cols#80, it#8, lines#24,
7031 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7032 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7033 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7034 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7035 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7036 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7037 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7039 # (adm20: removed obsolete ":kn#7:" -- esr)
7040 adm20|lear siegler adm20,
7042 cols#80, it#8, lines#24,
7043 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7044 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7045 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7046 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7048 adm21|lear siegler adm21,
7050 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
7051 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
7052 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
7054 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7055 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7056 # removed bogus-looking \200 from before <cup>. -- esr)
7060 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7061 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7062 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7063 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7064 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7065 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7066 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7067 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7068 # ADM 31 DIP Switches
7070 # This information comes from two versions of the manual for the
7071 # Lear-Siegler ADM 31.
7075 # +-||||-------------------------------------+
7090 # +----------------------------------------------+
7091 # front of case (keyboard)
7093 # S1 - Data Rate - Modem
7094 # S2 - Data Rate - Printer
7095 # ------------------------
7097 # -------------------
7115 # S3 - Interface/Printer/Attributes
7116 # ---------------------------------
7117 # Printer Busy Control
7120 # off off off Busy not active, CD disabled
7121 # off off on Busy not active, CD enabled
7122 # off on off Busy active on J5-20, CD disabled
7123 # on off off Busy active on J5-19, CD disabled - Factory Set.
7124 # on off on Busy active on J5-19, CD enabled
7126 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7128 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7130 # sw6 ON enables printer BUSY active LOW - Factory Setting
7131 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7133 # sw7 ON - steady cursor - Factory Setting
7134 # OFF - blinking cursor
7136 # sw8 ON causes selected attribute character to be displayed
7137 # OFF causes SPACE to be displayed instead - Factory Setting
7143 # sw4 sw1 sw2 sw3 sw4
7144 # ---------------------------
7145 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7146 # Current Loop disabled - Factory Setting
7147 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7149 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7150 # Current Loop Disabled
7152 # sw5 ON disables dot stretching mode - Factory Setting
7153 # OFF enables dot stretching mode
7154 # sw6 ON enables blanking function
7155 # OFF enables underline function - Factory Setting
7156 # sw7 ON causes NULLS to be displayed as NULLS
7157 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7159 # S5 - Word Structure
7160 # -------------------
7161 # sw1 ON enables BREAK key - Factory Setting
7162 # OFF disables BREAK key
7163 # sw2 ON selects 50Hz monitor refresh rate
7164 # OFF selects 60Hz monitor refresh rate - Factory Setting
7166 # Modem Port Selection
7169 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
7170 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
7171 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7172 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
7173 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
7174 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
7175 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
7176 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
7178 # sw6 ON sends bit 8 a 1 (mark)
7179 # OFF sends bit 8 as 0 (space) - Factory Setting
7180 # sw7 ON selects Block Mode
7181 # OFF selects Conversation Mode - Factory Setting
7182 # sw8 ON selects Full Duplex operation
7183 # OFF selects Half Duplex operation - Factory Setting
7187 # sw1, sw2, sw6, sw7 Reserved - Factory 0
7189 # Printer Port Selection
7190 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
7192 # sw8 ON enables Printer Port
7193 # OFF disables Printer Port - Factory Setting
7195 # S7 - Polling Address
7196 # --------------------
7197 # sw1-7 Establish ASCII character which designates terminal polling address
7199 # OFF = logic 1 - Factory Setting
7200 # sw8 ON enables Polling Option
7201 # OFF disables Polling Option - Factory Setting
7204 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
7206 # This adm31 entry uses underline as the standout mode.
7207 # If the adm31 gives you trouble with standout mode, check the DIP switch in
7208 # position 6, bank @c11, 25% from back end of the circuit board. Should be
7209 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
7210 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
7211 adm31|lsi adm31 with sw6 set for underline mode,
7214 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7215 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7216 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
7217 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7218 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7219 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
7220 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
7221 adm31-old|o31|old adm31,
7222 rmul@, smso=\EG4, smul@, use=adm31,
7223 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
7227 if=/usr/share/tabset/vt100,
7228 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
7230 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
7234 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7235 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7236 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
7237 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
7238 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
7239 smir=\Eq, smul@, use=adm+sgr,
7240 # The following termcap for the Lear Siegler ADM-42 leaves the
7241 # "system line" at the bottom of the screen blank (for those who
7242 # find it distracting otherwise)
7243 adm42-ns|lsi adm-42 with no system line,
7244 cbt=\EI\EF \011, clear=\E;\EF \011,
7245 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
7246 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
7247 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
7248 smir=\Eq\EF \011, use=adm42,
7249 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
7250 # The insert mode of this terminal is commented out because it's broken for our
7251 # purposes in that it will shift the position of every character on the page,
7252 # not just the cursor line!
7253 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
7254 adm1178|1178|lsi adm1178,
7256 cols#80, lines#24, xmc#1,
7257 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
7258 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7259 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
7260 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
7261 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
7262 sgr0=\E), smso=\EG4, smul=\EG1,
7266 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
7267 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
7268 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
7270 # ComputerVision Services
7271 # 500 Old Connecticut Path
7275 # Standout mode is dim reverse-video.
7276 pt100|pt200|wren|fenix|prime pt100/pt200,
7278 cols#80, it#8, lines#24,
7279 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
7280 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
7281 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
7282 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
7283 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
7284 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
7285 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
7286 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
7288 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
7289 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
7290 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
7292 cup=\E[%i%p1%d;%p2%dH, use=pt100,
7294 rmso@, smso@, use=pt100,
7295 pt250w|Prime PT250 in 132-column mode,
7296 rmso@, smso@, use=pt100w,
7301 # 3475-A North 1st Street
7303 # Vox: (800)-457-4447
7304 # Fax: (408)-473-1510
7305 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
7307 # Qume was bought by Wyse, but still (as of early 1995) has its own support
7308 # group and production division.
7310 # Discontinued Qume models:
7312 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
7313 # built to replace them, and a qvt119+ which was a 101+ with available wide
7314 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
7315 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
7316 # ANSI-compatible terminals with the qvt323 and qvt61.
7318 # Current Qume models (as of February 1995):
7320 # All current Qume terminals have ANSI-compatible operation modes.
7321 # Qume is still producing the qvt62, which features emulations for other
7322 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
7323 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
7324 # with many emulations including Wyse370, Wyse 325, etc. Their newest
7325 # model is the qvt520, which is vt420-compatible.
7327 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
7329 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
7330 # setup mode. Shift-s should be a configuration save to NVRAM.
7332 qvt101|qvt108|qume qvt 101 and QVT 108,
7335 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
7336 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
7337 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
7338 # What seems to be going on here is that this entry was designed so that
7339 # the normal highlight is bold and standout is dim plus something else
7340 # (reverse-video maybe? But then, are there two <rev> sequences?)
7341 qvt101+|qvt101p|qume qvt 101 PLUS product,
7343 cols#80, lines#24, xmc#0,
7344 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
7345 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7346 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
7347 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7348 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
7349 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
7350 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
7351 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
7352 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
7353 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7354 qvt102|qume qvt 102,
7355 cnorm=\E., use=qvt101,
7356 # (qvt103: added <rmam>/<smam> based on init string -- esr)
7357 qvt103|qume qvt 103,
7359 cols#80, it#8, lines#24, vt#3,
7360 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7361 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7362 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
7363 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
7364 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
7365 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
7366 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7367 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
7368 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
7369 rmso=\E[m$<2>, rmul=\E[m$<2>,
7370 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7371 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
7372 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
7373 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
7374 qvt103-w|qume qvt103 132 cols,
7376 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7377 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
7379 cols#80, lines#24, xmc#0,
7380 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
7381 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7382 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
7383 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
7384 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
7385 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
7386 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7387 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7388 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
7389 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7390 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
7391 lines#25, use=qvt119+,
7392 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
7394 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7395 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
7396 lines#25, use=qvt119+,
7397 qvt203|qvt203+|qume qvt 203 Plus,
7398 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
7399 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
7400 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
7401 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7402 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
7404 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7406 # Since a command is present for enabling 25 data lines,
7407 # a specific terminfo entry may be generated for the 203.
7408 # If one is desired for the QVT 119 PLUS then 25 lines must
7409 # be selected in the status line (setup line 9).
7411 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
7413 is2=\E[=40h\E[?3l, use=qvt203,
7414 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
7416 rs2=\E[?3h\E[=40h, use=qvt203,
7418 #### Televideo (tvi)
7421 # 550 East Brokaw Road
7422 # PO Box 49048 95161
7424 # Vox: (408)-954-8333
7425 # Fax: (408)-954-0623
7428 # These require incredible amounts of padding.
7430 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
7431 # Televideo terminals are ANSI and PC-ANSI compatible.
7433 tvi803|televideo 803,
7434 clear=\E*$<10>, use=tvi950,
7436 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7437 # Switch settings are:
7458 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
7474 # U do CR/LF when CR received
7475 # D do CR when CR received
7497 # S2 6 Cursor down key
7501 # S2 7 Screen colour
7505 # S2 8 DSR status (pin 6)
7509 # S2 9 DCD status (pin 8)
7513 # S2 10 DTR status (pin 20)
7516 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7517 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7518 tvi910|televideo model 910,
7520 cols#80, it#8, lines#24, xmc#1,
7521 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7522 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7523 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7524 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7525 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7526 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7527 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7528 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7529 # From: Alan R. Rogers <rogers%albany@csnet-relay>
7530 # as subsequently hacked over by someone at SCO
7531 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7533 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7536 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
7537 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
7538 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
7539 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
7542 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
7543 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
7544 # D U D D 8O1 D U U U 8E2
7546 # S1 9 Autowrap (U = on, D = off)
7547 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7548 # S2 1 Mode (U = block, D = conversational)
7549 # S2 2 Duplex (U = half, D = full)
7550 # S2 3 Hertz (U = 50, D = 60)
7551 # S2 4 Edit mode (U = local, D = duplex)
7552 # S2 5 Cursor type (U = underline, D = block)
7553 # S2 6 Cursor down key (U = send ^J, D = send ^V)
7554 # S2 7 Screen colour (U = green on black, D = black on green)
7555 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
7556 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
7557 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7559 tvi910+|televideo 910+,
7560 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7561 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7562 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7563 ll=\E=7\s, use=tvi910,
7565 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
7566 # <khome> from BRL entry -- esr)
7567 tvi912|tvi914|tvi920|old televideo 912/914/920,
7568 OTbs, OTpt, am, msgr,
7569 cols#80, it#8, lines#24, xmc#1,
7570 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7571 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7572 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7573 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7574 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7575 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7576 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7577 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7579 # We got some new tvi912c terminals that act really weird on the regular
7580 # termcap, so one of our gurus worked this up. Seems that cursor
7581 # addressing is broken.
7582 tvi912cc|tvi912 at cowell college,
7585 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7586 # From: Benjamin C. W. Sittler
7588 # Someone has put a scanned copy of the manual online at:
7589 # http://vt100.net/televideo/912b-om/
7591 # These terminals were produced ca. 1979, and had a 12" monochrome
7592 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7593 # ASCII, and were generally similar to adm3a but with attributes
7594 # (including some with magic cookies), fancy half-duplex mode, and
7597 # Some operations reqire truly incredible amounts of padding. The
7598 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7599 # are so slow as to be nearly unusable.
7601 # There may or may not have been a separate, earlier series of 912/920
7602 # terminals (without the "B" and "C" suffix); I have never seen one,
7603 # and the manual only describes the "B" and "C" series. The 912 and 920
7604 # are quite distinct from the 914 and 924, which were much nicer non-
7605 # magic-cookie terminals similar to the 950.
7607 # This is a new description for the following TeleVideo terminals,
7608 # distinguished chiefly by their keyboards:
7610 # TVI-912B - very odd layout, no function keys (84 keys)
7611 # TVI-920B - typewriter layout, no function keys (103 keys)
7612 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7613 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7615 # To choose a setting for the TERM variable, start with the model:
7617 # Model || base name
7618 # ----------||-----------
7619 # TVI-912B || tvi912b
7620 # TVI-912C || tvi912c
7621 # TVI-920B || tvi920b
7622 # TVI-920C || tvi920c
7624 # Then add a suffix from the following table describing installed options
7625 # and how you'd like to use the terminal:
7627 # Use Video | Second | Visual | Magic | Page || feature
7628 # Attributes | Page | Bell | Cookies | Print || suffix
7629 # ------------|--------|--------|---------|-------||---------
7630 # No | No | N/A | N/A | No || -unk
7631 # No | No | N/A | N/A | Yes || -p
7632 # No | Yes | No | N/A | No || -2p-unk
7633 # No | Yes | No | N/A | Yes || -2p-p
7634 # No | Yes | Yes | N/A | No || -vb-unk
7635 # No | Yes | Yes | N/A | Yes || -vb-p
7636 # Yes | No | N/A | No | N/A ||
7637 # Yes | No | N/A | Yes | N/A || -mc
7638 # Yes | Yes | No | No | N/A || -2p
7639 # Yes | Yes | No | Yes | N/A || -2p-mc
7640 # Yes | Yes | Yes | No | N/A || -vb
7641 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7643 # So e.g. a model 920 C with second page memory option, visual bell
7644 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7645 # second page memory option and using magic cookies would be
7650 # At 9600 baud, the terminal is prone to overflow its input buffer
7651 # during complex operations (insert/delete
7652 # character/line/screen/page), and it does not signal this over the
7653 # RS232 cable. The typical symptom of an overrun is that the terminal
7654 # starts beeping, and output becomes garbled.
7656 # The padding delays in this terminfo were derived using tack(1)
7657 # running on a Linux box connected to a TVI-920C with a later-model
7658 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7659 # vary. The numbers below seem to give the terminal enough time so
7660 # that it doesn't overflow its input buffer and start losing
7665 # If you want to use the FUNCT key on a tvi912[bc], use the
7666 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7667 # the following table (these also work on the 920 series):
7669 # Unshifted Function Keys:
7671 # Key | capname|| Equivalent
7672 # -----|--------||------------
7673 # F1 | <kf1> || FUNCT + @
7674 # F2 | <kf2> || FUNCT + A
7675 # F3 | <kf3> || FUNCT + B
7676 # F4 | <kf4> || FUNCT + C
7677 # F5 | <kf5> || FUNCT + D
7678 # F6 | <kf6> || FUNCT + E
7679 # F7 | <kf7> || FUNCT + F
7680 # F8 | <kf8> || FUNCT + G
7681 # F9 | <kf9> || FUNCT + H
7682 # F10 | <kf10> || FUNCT + I
7683 # F11 | <kf11> || FUNCT + J
7685 # Shifted Function Keys:
7687 # SHIFT + Key | capname|| Equivalent
7688 # -------------|--------||------------
7689 # SHIFT + F1 | <kf12> || FUNCT + `
7690 # SHIFT + F2 | <kf13> || FUNCT + a
7691 # SHIFT + F3 | <kf14> || FUNCT + b
7692 # SHIFT + F4 | <kf15> || FUNCT + c
7693 # SHIFT + F5 | <kf16> || FUNCT + d
7694 # SHIFT + F6 | <kf17> || FUNCT + e
7695 # SHIFT + F7 | <kf18> || FUNCT + f
7696 # SHIFT + F8 | <kf19> || FUNCT + g
7697 # SHIFT + F9 | <kf20> || FUNCT + h
7698 # SHIFT + F10 | <kf21> || FUNCT + i
7699 # SHIFT + F11 | <kf22> || FUNCT + j
7701 # PORTS AND SWITCH SETTINGS
7703 # Here are the switch settings for the TVI-912B/TVI-920B and
7704 # TVI-912C/TVI-920C:
7706 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7707 # 2: 9600 3: 4800 4: 2400 5: 1200
7708 # 6: 600 7: 300 8: 150 9: 75
7711 # S2 UART/Terminal options:
7713 # 1: Not used Not allowed
7714 # 2: Alternate character set Standard character set
7715 # 3: Full duplex Half duplex
7716 # 4: 50 Hz refresh 60 Hz refresh
7717 # 5: No parity Send parity
7718 # 6: 2 stop bits 1 stop bit
7719 # 7: 8 data bits 7 data bits
7720 # 8: Not used Not allowed on Rev E or lower
7721 # 9: Even parity Odd parity
7722 # 10: Steady cursor Blinking cursor
7723 # (On Rev E or lower, use W25 instead of switch 10.)
7725 # S5 UART/Terminal options:
7727 # 1: P3-6 Not connected DSR received on P3-6
7728 # 2: P3-8 Not connected DCD received on P3-8
7730 # 3 Open, 4 Open: P3-20 Not connected
7731 # 3 Open, 4 Closed: DTR on when terminal is on
7732 # 3 Closed, 4 Open: DTR is connected to RTS
7733 # 3 Closed, 4 Closed: Not allowed
7735 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7736 # all data transmitted out of the modem port (P3) will also be
7737 # transmitted out of the printer port (P4).
7739 # 6 Open, 7 Open: Not allowed
7740 # 6 Open, 7 Closed: 20ma current loop input
7741 # 6 Closed, 7 Open: RS232 input
7742 # 6 Closed, 7 Closed: Not allowed
7745 # If the jumper is installed, the effect will occur (the next time the terminal
7748 # S4/W31: Enables automatic LF upon receipt of CR from
7749 # remote or keyboard.
7750 # S4/W32: Enables transmission of EOT at the end of Send. If not
7751 # installed, a carriage return is sent.
7752 # S4/W33: Disables automatic carriage return in column 80.
7753 # S4/W34: Selects Page Print Mode as initial condition. If not
7754 # installed, Extension Mode is selected.
7756 # NON-STANDARD CAPABILITIES
7758 # Sending <u9> or <u7> returns a cursor position report in the format
7759 # YX\r, where Y and X are as in <cup>. This format is described in
7760 # <u8> and <u6>, but it's not clear how one should write an
7761 # appropriate scanf string, since we need to subtract %' ' from the
7762 # character after reading it. The <u9> capability is used by tack(1)
7763 # to synchronize during padding tests, and seems to work for that
7766 # This description also includes the obsolete termcap capabilities
7767 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7769 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7771 # The FUNCT modifier actually works with every normal key by sending
7772 # ^AX\r, where X is the sequence normally sent by that key. This is a
7773 # sort of meta key not currently describable in terminfo.
7775 # There are quite a few other keys (especially on the 920 models,) but
7776 # they are for the most part only useful in block mode.
7778 # These terminals have lots of forms manipulation features, mainly
7779 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7780 # spaces"; nulls are sentinels for "send X" operations); "send X"
7781 # operations for uploading all or part of the screen; and block-mode
7782 # editing keys (they don't send escape sequences, but manipulate video
7783 # memory directly). Block mode is used for local editing, and protect
7784 # mode (in conjunction with the "write protect" attribute,
7785 # a.k.a. half-intensity outside of protect mode) is used to control
7786 # which parts of the screen are edited/sent/printed (by <mc0>).
7788 # There are at least two major families of ROM, "early" and
7789 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7790 # support a few extra escape sequences for manipulating the off-screen
7791 # memory page, and for sending whole pages back to the host (mainly
7792 # useful in block mode.) The descriptions in this file don't use any
7793 # of those sequences: set cursor position including page (\E-PYX,
7794 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7795 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7796 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7797 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7798 # are as in <cup>, and some "send page" features mainly useful for
7799 # forms manipulation.
7801 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7802 # except that a terminal reset (<is2>) enables the keyboard.
7804 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7805 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7809 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7810 # sequences (I infer that in some TeleVideo terminal they may invert
7811 # and uninvert the display) so the <flash> sequence given here is a
7812 # cheesy page-flip instead.
7814 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7815 # tack(1), so it is not included in the descriptions below.
7817 # It's not clear whether auto_left_margin (<bw>) flag should be set
7818 # for these terminals; tack says yes, so it is set here, but this
7819 # differs from other descriptions I've seen.
7821 # Extension print mode (<mc5>) echoes all characters to the printer
7822 # port [in addition to displaying them] except for the page print mode
7823 # sequence (<mc4>); this is a slight violation of the terminfo
7824 # definition for <mc5> but I don't expect it to cause problems. We
7825 # reset to page print mode in <rs1> since it may have been enabled
7828 # The descriptions with plus signs (+) are building blocks.
7830 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7832 cols#80, it#8, lines#24,
7833 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7834 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7835 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7836 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7837 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7838 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7839 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7840 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7841 u7=\E?, u8=%c%c\r, u9=\E?,
7843 # This isn't included in the basic capabilities because it is
7844 # typically unusable in combination with the full range of video
7845 # attributes, since the magic cookie attributes turn into ASCII
7846 # control characters, and the half-intensity ("protected") attribute
7847 # converts all affected characters to spaces.
7849 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7852 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7853 # exposes no other attributes (half-intensity is the only attribute
7854 # that does not generate a magic cookie.)
7856 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7858 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7861 # Full magic-cookie attribute support, with half-intensity reverse
7862 # video for standout. Note that we add a space in the <dim> sequence
7863 # to give a consistent magic-cookie count. Also note that <sgr> uses
7864 # backspacing (in the TVI-supported order) to apply all requested
7865 # attributes with only a single magic cookie.
7867 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7869 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7871 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7872 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7874 # This uses the second page memory option to save & restore screen
7875 # contents. If your terminal is missing the option, this description
7876 # should still work, but that has not been tested.
7878 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7879 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7880 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7882 # This simulates flashing by briefly toggling to the other page
7885 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7886 bel=\EK$<100>\EK, use=tvi912b+2p,
7888 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7890 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7891 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7892 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7893 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7894 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7895 kf8=^AG\r, kf9=^AH\r,
7897 # Combinations of the basic building blocks
7899 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7900 use=tvi912b+2p, use=tvi912b-unk,
7902 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7903 use=tvi912b+vb, use=tvi912b-unk,
7905 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7906 use=tvi912b+printer, use=tvi912b-unk,
7908 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7909 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7911 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7912 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7914 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7915 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7917 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7918 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7920 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7921 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7923 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7924 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7926 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7927 use=tvi912b+dim, use=tvi912b-unk,
7929 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7930 use=tvi912b+mc, use=tvi912b-unk,
7932 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7933 use=tvi920b+fn, use=tvi912b-unk,
7935 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7936 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7938 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7939 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7941 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7942 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7944 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7945 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7948 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7949 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7952 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7953 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7956 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7957 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7960 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7961 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7964 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7965 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7968 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7969 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7971 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7972 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7974 # Televideo 921 and variants
7975 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7976 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7977 # also added empty <acsc> to suppress tic warning -- esr)
7978 tvi921|televideo model 921 with sysline same as page & real vi function,
7979 OTbs, OTpt, am, hs, xenl, xhp,
7980 cols#80, lines#24, xmc#0,
7981 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7982 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7983 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7984 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7985 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7986 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7987 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7988 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7989 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7990 # without the beeper
7991 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7992 # also added empty <acsc> to suppress tic warning -- esr)
7993 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7995 cols#80, lines#24, xmc#0,
7996 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7997 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7998 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7999 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8000 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8001 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8002 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8003 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8004 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8005 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8006 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8007 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8008 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8009 kil1=\EE$<2*/>, use=tvi92B,
8011 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8012 # in from a BSD termcap file because it looks like they do something the
8013 # old ones skip -- esr)
8014 tvi924|televideo tvi924,
8015 am, bw, hs, in, mir, msgr, xenl, xon,
8016 cols#80, it#8, lines#24, wsl#80, xmc#0,
8017 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8018 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8019 cub1=^H, cud1=^V, cuf1=^L,
8020 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8021 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8022 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8023 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8024 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8025 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8026 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8027 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8028 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8029 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8030 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8031 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8032 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8035 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8037 # Here are the settings for the external (baud) switches (S1):
8040 # 7 8 9 10 [Printer]
8041 # 1 2 3 4 [Main RS232]
8042 # -----------------------------------------------------
8061 # Settings for word length and stop-bits (S1)
8063 # Position Description
8065 # ---------------------------
8072 # S2 (external) settings
8074 # Position Up Dn Description
8075 # --------------------------------------------
8077 # X Duplex edit (transmit editing keys)
8078 # --------------------------------------------
8079 # 2 X 912/920 emulation
8081 # --------------------------------------------
8085 # --------------------------------------------
8089 # --------------------------------------------
8093 # --------------------------------------------
8097 # --------------------------------------------
8101 # --------------------------------------------
8102 # 6 X White on black display
8103 # X Black on white display
8104 # --------------------------------------------
8107 # --------------------------------------------
8110 # --------------------------------------------
8113 # --------------------------------------------
8116 # --------------------------------------------
8117 # 10 X CR/LF (Auto LF)
8120 # S3 (internal switch) settings:
8122 # Position Up Dn Description
8123 # --------------------------------------------
8126 # --------------------------------------------
8129 # --------------------------------------------
8132 # --------------------------------------------
8135 # --------------------------------------------
8138 # --------------------------------------------
8139 # 4 X Blinking block cursor
8141 # --------------------------------------------
8142 # 4 X Blinking underline cursor
8144 # --------------------------------------------
8145 # 4 X Steady block cursor
8147 # --------------------------------------------
8148 # 4 X Steady underline cursor
8150 # --------------------------------------------
8151 # 6 X Screen blanking timer (ON)
8152 # X Screen blanking timer (OFF)
8153 # --------------------------------------------
8154 # 7 X Page attributes
8156 # --------------------------------------------
8157 # 8 X DCD disconnected
8159 # --------------------------------------------
8160 # 9 X DSR disconnected
8162 # --------------------------------------------
8163 # 10 X DTR Disconnected
8165 # --------------------------------------------
8167 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
8168 tvi925|televideo 925,
8169 OTbs, am, bw, hs, ul,
8170 cols#80, lines#24, xmc#1,
8171 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
8172 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8173 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
8174 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
8175 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
8176 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8177 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8178 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8179 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
8180 tsl=\Eh\Ef, use=adm+sgr,
8181 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
8182 # to avoid "magic cookie" standout glitch:
8183 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
8185 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8187 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
8188 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
8189 # for additional capabilities,
8190 # The following tvi descriptions from B:pjphar and virus!mike
8191 # is for all 950s. It sets the following attributes:
8192 # full duplex (\EDF) write protect off (\E()
8193 # conversation mode (\EC) graphics mode off (\E%)
8194 # white on black (\Ed) auto page flip off (\Ew)
8195 # turn off status line (\Eg) clear status line (\Ef\r)
8196 # normal video (\E0) monitor mode off (\EX or \Eu)
8197 # edit mode (\Er) load blank char to space (\Ee\040)
8198 # line edit mode (\EO) enable buffer control (^O)
8199 # protect mode off (\E\047) duplex edit keys (\El)
8200 # program unshifted send key to send line all (\E016)
8201 # program shifted send key to send line unprotected (\E004)
8202 # set the following to nulls:
8203 # field delimiter (\Ex0\200\200)
8204 # line delimiter (\Ex1\200\200)
8205 # start-protected field delimiter (\Ex2\200\200)
8206 # end-protected field delimiter (\Ex3\200\200)
8207 # set end of text delimiter to carriage return/null (\Ex4\r\200)
8209 # TVI 950 Switch Setting Reference Charts
8213 # S1 1 2 3 4 5 6 7 8 9 10
8214 # +-----------------------+-----+-----+-----------------------+
8215 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
8217 # +------+-----------------------+-----+-----+-----------------------+
8218 # | Up | See | 7 | 2 | See |
8219 # +------+-----------------------+-----+-----+-----------------------+
8220 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
8221 # +------+-----------------------+-----+-----+-----------------------+
8224 # S2 1 2 3 4 5 6 7 8 9 10
8225 # +-----+-----+-----------------+-----+-----------+-----+-----+
8226 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
8227 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8228 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
8229 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8230 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
8231 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8235 # +-----------+-----+-----+-----+-----+-----------+
8236 # | Display | 1 | 2 | 3 | 4 | Baud |
8237 # +-----------+-----+-----+-----+-----+ |
8238 # | Printer | 7 | 8 | 9 | 10 | Rate |
8239 # +-----------+-----+-----+-----+-----+-----------+
8240 # | D | D | D | D | 9600 |
8241 # | U | D | D | D | 50 |
8242 # | D | U | D | D | 75 |
8243 # | U | U | D | D | 110 |
8244 # | D | D | U | D | 135 |
8245 # | U | D | U | D | 150 |
8246 # | D | U | U | D | 300 |
8247 # | U | U | U | D | 600 |
8248 # | D | D | D | U | 1200 |
8249 # | U | D | D | U | 1800 |
8250 # | D | U | D | U | 2400 |
8251 # | U | U | D | U | 3600 |
8252 # | D | D | U | U | 4800 |
8253 # | U | D | U | U | 7200 |
8254 # | D | U | U | U | 9600 |
8255 # | U | U | U | U | 19200 |
8256 # +-----+-----+-----+-----+-----------+
8259 # +-----+-----+-----+-----------+
8260 # | 3 | 4 | 5 | Parity |
8261 # +-----+-----+-----+-----------+
8262 # | X | X | D | None |
8263 # | D | D | U | Odd |
8264 # | D | U | U | Even |
8265 # | U | D | U | Mark |
8266 # | U | U | U | Space |
8267 # +-----+-----+-----+-----------+
8271 # +-----+-----+-----------------+
8272 # | 7 | 8 | Communication |
8273 # +-----+-----+-----------------+
8274 # | D | D | Half Duplex |
8275 # | D | U | Full Duplex |
8278 # +-----+-----+-----------------+
8280 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
8281 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
8282 # should be present and all tvi native modes use the same string for this.
8283 # Finally, note that BSD has cud1=^V. -- esr)
8284 tvi950|televideo 950,
8285 OTbs, am, hs, mir, msgr, xenl, xon,
8286 cols#80, it#8, lines#24, xmc#1,
8287 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
8288 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8289 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8290 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
8291 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
8293 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
8294 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
8295 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
8296 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8297 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8298 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
8299 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
8302 # is for 950 with two pages adds the following:
8303 # set 48 line page (\E\\2)
8304 # place cursor at page 0, line 24, column 1 (\E-07 )
8305 # set local (no send) edit keys (\Ek)
8307 # two page 950 adds the following:
8308 # when entering ex, set 24 line page (\E\\1)
8309 # when exiting ex, reset 48 line page (\E\\2)
8310 # place cursor at 0,24,1 (\E-07 )
8311 # set duplex (send) edit keys (\El) when entering vi
8312 # set local (no send) edit keys (\Ek) when exiting vi
8314 tvi950-2p|televideo950 w/2 pages,
8315 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
8316 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8317 smkx=\El, use=tvi950,
8319 # is for 950 with four pages adds the following:
8320 # set 96 line page (\E\\3)
8321 # place cursor at page 0, line 24, column 1 (\E-07 )
8323 # four page 950 adds the following:
8324 # when entering ex, set 24 line page (\E\\1)
8325 # when exiting ex, reset 96 line page (\E\\3)
8326 # place cursor at 0,24,1 (\E-07 )
8328 tvi950-4p|televideo950 w/4 pages,
8329 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
8330 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8331 smkx=\El, use=tvi950,
8333 # <is2> for reverse video 950 changes the following:
8334 # set reverse video (\Ed)
8336 # set vb accordingly (\Ed ...delay... \Eb)
8338 tvi950-rv|televideo950 rev video,
8339 flash=\Ed$<200/>\Eb,
8340 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
8343 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
8344 tvi950-rv-2p|televideo950 rev video w/2 pages,
8345 flash=\Ed$<200/>\Eb,
8346 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
8347 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8348 smkx=\El, use=tvi950,
8350 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
8351 tvi950-rv-4p|televideo950 rev video w/4 pages,
8352 flash=\Ed$<200/>\Eb,
8353 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
8354 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8355 smkx=\El, use=tvi950,
8356 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
8357 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
8358 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
8359 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
8360 # the :ko: string had :cl: in it, which means that one of the original
8361 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
8362 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
8363 # ko implies -- esr)
8364 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
8366 tvi955|televideo 955,
8369 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
8370 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
8371 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
8372 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
8373 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
8374 rmam=\E[=7l, rmxon=^N,
8375 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
8376 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
8378 tvi955-w|955-w|televideo955 w/132 cols,
8380 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8381 # use half-intensity as normal mode, full intensity as <bold>
8382 tvi955-hb|955-hb|televideo955 half-bright,
8383 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
8384 sgr0=\EG0\E[=5h, use=tvi955,
8385 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
8386 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
8387 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
8388 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
8389 # it does to the function keys. I deduced <rmam>/<smam>.
8390 # also added empty <acsc> to suppress tic warning, -- esr)
8391 tvi970|televideo 970,
8392 OTbs, OTpt, am, da, db, mir, msgr,
8393 cols#80, it#8, lines#24,
8394 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
8395 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
8396 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
8397 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
8398 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
8399 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
8400 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8401 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
8402 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
8403 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8404 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
8405 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
8406 smul=\E[4m, vpa=\E[%i%p1%dd,
8407 tvi970-vb|televideo 970 with visual bell,
8408 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8410 tvi970-2p|televideo 970 with using 2 pages of memory,
8411 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
8413 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
8414 # per line (rather than 40), Esc K chooses the normal character set. Not sure
8415 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
8416 # <smul> strings are klutzy, but at least use no screen space.
8417 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
8418 # its absence means <smam>=\Ev isn't safe to use. -- esr)
8419 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
8420 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
8421 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
8422 tvipt|televideo personal terminal,
8425 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
8426 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
8427 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
8428 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
8429 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
8430 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
8431 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
8432 tvi9065|televideo 9065,
8433 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8434 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8436 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8437 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8438 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8439 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8440 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8441 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8442 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8443 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8444 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8445 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8447 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8448 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8449 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8450 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8451 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8452 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8453 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8454 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8455 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8456 pfx=\E|%p1%{48}%+%c1%p2%s\031,
8457 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8458 rep=\E[%p2%db%p1%c, rev=\EG4,
8459 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8460 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8461 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8462 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8463 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8464 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8465 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
8466 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8467 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8468 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8472 # In September 1993, Visual Technology of Westboro, Massachusetts,
8473 # merged with White Pine Software of Nashua, New Hampshire.
8475 # White Pine Software may be contacted at +1 603/886-9050.
8476 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8479 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8480 # Recently I hacked together the following termcap for Visual
8481 # Technology's Visual 50 terminal. It's a slight modification of
8483 # It's intended to run when the Visual 50 is in vt52 emulation mode
8484 # (I know what you're thinking; if it's emulating a vt52, then why
8485 # another termcap? Well, it turns out that the Visual 50 can handle
8486 # <dl1> and db(?) among other things, which the vt52 can't)
8487 # The termcap works OK for the most part. The only problem is on
8488 # character inserts. The whole line gets painfully redrawn for each
8489 # character typed. Any suggestions?
8490 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
8491 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
8492 # disguise; <kf7>-<kf9> are really l1-l3.
8494 OTbs, OTpt, am, da, db, msgr,
8495 cols#80, it#8, lines#24,
8496 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8497 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8498 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8499 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8500 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8501 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8502 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8503 # this one was BSD & SCO's vi50
8504 vi50adm|visual 50 in adm3a mode,
8506 cols#80, it#8, lines#24,
8507 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8508 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8509 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8510 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8512 # From: Jeff Siegal <jbs@quiotix.com>
8514 OTbs, am, mir, msgr,
8515 cols#80, it#8, lines#24,
8516 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8517 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8518 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8519 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8520 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8523 # Visual 200 from BRL
8524 # The following switch settings are assumed for normal operation:
8525 # FULL_DUPLEX SCROLL CR
8526 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
8527 # Other switches may be set for operator convenience or communication
8529 # Character insertion is kludged in order to get around the "beep" misfeature.
8530 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8531 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8532 # and <dl1> strings, but we seem to get along fine without them.
8534 OTbs, OTpt, am, mir, msgr,
8535 OTkn#10, cols#80, it#8, lines#24,
8536 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8537 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8538 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8539 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8540 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8541 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8542 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8543 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8544 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8545 rmacs=\EG, rmkx=\E>, rmso=\E3,
8546 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8547 smkx=\E=, smso=\E4, tbc=\Eg,
8548 # The older Visuals didn't come with function keys. This entry uses
8549 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8550 # If your version of vi doesn't support function keys you may want
8552 vi200-f|visual 200 no function keys,
8553 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8554 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8555 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8557 vi200-rv|visual 200 reverse video,
8558 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8560 # the function keys are programmable but we don't reprogram them to their
8561 # default values with <is2> because programming them is very verbose. maybe
8562 # an initialization file should be made for the 300 and they could be stuck
8564 # (vi300: added <rmam>/<smam> based on init string -- esr)
8565 vi300|visual 300 ansi x3.64,
8568 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8569 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8570 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8572 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8573 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8574 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8575 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8576 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8577 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8578 smso=\E[1m, smul=\E[4m,
8579 # some of the vi300s have older firmware that has the command
8580 # sequence for setting editing extent reversed.
8581 vi300-old|visual 300 with old firmware (set edit extent reversed),
8582 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8585 # Visual 500 prototype entry from University of Wisconsin.
8586 # The best place to look for the escape sequences is page A1-1 of the
8587 # Visual 500 manual. The initialization sequence given here may be
8588 # overkill, but it does leave out some of the initializations which can
8589 # be done with the menus in set-up mode.
8590 # The :xp: line below is so that emacs can understand the padding requirements
8591 # of this slow terminal. :xp: is 10 time the padding factor.
8592 # (vi500: removed unknown :xp#4: termcap;
8593 # also added empty <acsc> to suppress tic warning -- esr)
8596 cols#80, it#8, lines#33,
8597 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8598 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8599 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8600 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8601 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8603 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8604 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8605 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8606 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8608 # The visual 550 is a visual 300 with tektronix graphics,
8609 # and with 33 lines. clear screen is modified here to
8610 # also clear the graphics.
8611 vi550|visual 550 ansi x3.64,
8613 clear=\030\E[H\E[2J, use=vi300,
8615 vi603|visual603|visual 603,
8617 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8618 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8620 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8621 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8622 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8623 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8629 # 3471 North First Street
8630 # San Jose, CA 95134
8631 # Vox: (408)-473-1200
8632 # Fax: (408) 473-1222
8633 # Web: http://www.wyse.com
8635 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8636 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8637 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8638 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8640 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8641 # They now own the Qume and Amdek brands, too. So these are the people to
8642 # talk with about all Link, Qume, and Amdek terminals.
8644 # These entries include a few small fixes.
8645 # I canceled the bel capacities in the vb entries.
8646 # I made two trivial syntax fixes in the wyse30 entry.
8647 # I made some entries relative to adm+sgr.
8650 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8652 # Although the Wyse 30 can support more than one attribute
8653 # it requires magic cookies to do so. Many applications do not
8654 # function well with magic cookies. The following terminfo uses
8655 # the protect mode to support one attribute (dim) without cookies.
8656 # If more than one attribute is needed then the wy30-mc terminfo
8659 wy30|wyse30|Wyse 30,
8660 am, bw, hs, mc5i, mir, msgr, xon,
8661 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8662 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8663 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8664 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8665 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8666 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8667 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8668 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8669 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8670 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8671 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8672 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8673 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8674 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8675 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8676 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8677 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8678 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8679 smso=\E`7\E), tbc=\E0, tsl=\EF,
8681 # This terminal description uses the non-hidden attribute mode
8682 # (with magic cookie).
8684 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8685 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8688 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8689 rmcup=\EG0, rmso=\EG0,
8690 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8691 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8692 smso=\EG4, use=wy30, use=adm+sgr,
8693 # The mandatory pause used by <flash> does not work with
8694 # older versions of terminfo. If you see this effect then
8695 # unset xon and delete the / from the delay.
8696 # i.e. change $<100/> to $<100>
8697 wy30-vb|wyse30-vb|wyse 30 visible bell,
8700 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8701 # Normal) without magic cookies by using the protect mode.
8702 # The following description uses this feature, but when more
8703 # than one attribute is put on the screen at once, all attributes
8704 # will be changed to be the same as the last attribute given.
8705 # The Wyse 50 can support more attributes when used with magic
8706 # cookies. The wy50-mc terminal description uses magic cookies
8707 # to correctly handle multiple attributes on a screen.
8709 wy50|wyse50|Wyse 50,
8710 am, bw, hs, mc5i, mir, msgr, xon,
8711 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8712 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8713 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8714 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8715 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8716 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8717 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8718 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8719 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8720 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8721 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8722 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8723 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8724 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8725 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8726 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8727 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8728 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8729 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8730 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8731 smso=\E`6\E), tbc=\E0, tsl=\EF,
8733 # This terminal description uses the non-hidden attribute mode
8734 # (with magic cookie).
8736 # The mandatory pause used by flash does not work with some
8737 # older versions of terminfo. If you see this effect then
8738 # unset <xon> and delete the / from the delay.
8739 # i.e. change $<100/> to $<100>
8740 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8741 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8744 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8745 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8746 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8747 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8748 smso=\EGt, use=wy50, use=adm+sgr,
8749 wy50-vb|wyse50-vb|wyse 50 visible bell,
8751 wy50-w|wyse50-w|wyse 50 132-column,
8752 cols#132, lw#7, nlab#16, wsl#97,
8753 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8755 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8759 # The Wyse 350 is a Wyse 50 with color.
8760 # Unfortunately this means that it has magic cookies.
8761 # The color attributes are designed to overlap the reverse, dim and
8762 # underline attributes. This is nice for monochrome applications
8763 # because you can make underline stuff green (or any other color)
8764 # but for true color applications it's not so hot because you cannot
8765 # mix color with reverse, dim or underline.
8766 # To further complicate things one of the attributes must be
8767 # black (either the foreground or the background). In reverse video
8768 # the background changes color with black letters. In normal video
8769 # the foreground changes colors on a black background.
8770 # This terminfo uses some of the more advanced features of curses
8771 # to display both color and blink. In the final analysis I am not
8772 # sure that the wy350 runs better with this terminfo than it does
8773 # with the wy50 terminfo (with user adjusted colors).
8775 # The mandatory pause used by flash does not work with
8776 # older versions of terminfo. If you see this effect then
8777 # unset xon and delete the / from the delay.
8778 # i.e. change $<100/> to $<100>
8780 # Bug: The <op> capability resets attributes.
8781 wy350|wyse350|Wyse 350,
8782 am, bw, hs, mc5i, mir, xon,
8783 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8785 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8786 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8787 cub1=^H, cud1=^J, cuf1=^L,
8788 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8789 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8790 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8791 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8792 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8793 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8794 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8795 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8796 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8797 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8798 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8799 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8800 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8801 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8802 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8803 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8804 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8805 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8806 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8807 wy350-vb|wyse350-vb|wyse 350 visible bell,
8809 wy350-w|wyse350-w|wyse 350 132-column,
8810 cols#132, lw#7, nlab#16, wsl#97,
8811 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8813 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8816 # This terminfo description is untested.
8817 # The wyse100 emulates an adm31, so the adm31 entry should work.
8821 cols#80, lines#24, xmc#1,
8822 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8823 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8824 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8825 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8826 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8827 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8828 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8830 # The Wyse 120/150 has most of the features of the Wyse 60.
8831 # This terminal does not need padding up to 9600 baud!
8832 # <msgr> should be set but the clear screen fails when in
8833 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8836 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8837 am, bw, hs, km, mc5i, mir, msgr, xon,
8838 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8839 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8840 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8841 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8842 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8843 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8844 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8845 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8846 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8847 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8848 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8849 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8850 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8851 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8852 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8853 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8854 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8855 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8856 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8857 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8858 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8859 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8861 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8862 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8863 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8864 tbc=\E0, tsl=\EF, use=adm+sgr,
8866 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8867 cols#132, lw#7, nlab#16, wsl#97,
8868 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8869 rs2=\E`;$<70>, use=wy120,
8871 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8872 lh@, lines#25, lw@, nlab@,
8873 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8875 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8876 lh@, lines#25, lw@, nlab@,
8877 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8879 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8882 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8885 # The Wyse 60 is like the Wyse 50 but with more padding.
8886 # The reset strings are slow and the pad times very depending
8887 # on other parameters such as font loading. I have tried
8888 # to follow the following outline:
8890 # <rs1> -> set personality
8891 # <rs2> -> set number of columns
8892 # <rs3> -> set number of lines
8893 # <is1> -> select the proper font
8894 # <is2> -> do the initialization
8895 # <is3> -> set up display memory (2 pages)
8897 # The Wyse 60's that have vt100 emulation are slower than the
8898 # older Wyse 60's. This change happened mid-1987.
8899 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8901 # The meta key is only half right. This terminal will return the
8902 # high order bit set when you hit CTRL-function_key
8904 # It may be useful to assign two function keys with the
8905 # values \E=(\s look at old data in page 1
8906 # \E=W, look at bottom of page 1
8907 # where \s is a space ( ).
8910 # The Wyse 60 runs faster when the XON/XOFF
8911 # handshake is turned off.
8913 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8914 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8915 wy60|wyse60|Wyse 60,
8916 am, bw, hs, km, mc5i, mir, msgr,
8917 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8918 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8919 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8920 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8921 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8922 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8923 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8924 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8925 ip=$<3>, is1=\EcB0\EcC1,
8926 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8927 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8928 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8929 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8930 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8931 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8932 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8933 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8934 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8935 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8936 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8937 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8938 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8939 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8940 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8941 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8942 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8943 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8944 tbc=\E0, tsl=\EF, use=adm+sgr,
8946 wy60-w|wyse60-w|wyse 60 132-column,
8947 cols#132, lw#7, nlab#16, wsl#97,
8948 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8949 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8951 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8952 lh@, lines#25, lw@, nlab@,
8953 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8954 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8955 lh@, lines#25, lw@, nlab@,
8956 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8958 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8960 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8961 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8962 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8963 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8964 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8965 cols#132, lw#7, nlab#16, wsl#97,
8966 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8967 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8968 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8970 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8971 lh@, lines#43, lw@, nlab@,
8972 pln@, rs3=\Ee+$<150>, use=wy60-42,
8973 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8974 lh@, lines#43, lw@, nlab@,
8975 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8977 wy60-vb|wyse60-vb|Wyse 60 visible bell,
8979 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8982 # The Wyse-99GT looks at lot like the Wyse 60 except that it
8983 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
8984 # setup parameter controls the number of lines on the screen.
8985 # For the Wyse 99GT the "lines" setup parameter controls the
8986 # number of lines in a page. The screen can display 25 lines max.
8987 # The Wyse-99GT also has personalities for the VT220 and
8988 # Tektronix 4014. But this has no bearing on the native mode.
8990 # (msgr) should be set but the clear screen fails when in
8991 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8992 # then set msgr, else use msgr@.
8994 # u0 -> enter Tektronix mode
8995 # u1 -> exit Tektronix mode
8997 wy99gt|wyse99gt|Wyse 99gt,
8999 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9000 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9001 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9002 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9003 u0=\E~>\E8, u1=\E[42h, use=wy60,
9005 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9006 cols#132, lw#7, nlab#16, wsl#97,
9007 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9008 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9011 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9012 lh@, lines#25, lw@, nlab@,
9013 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9015 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9016 lh@, lines#25, lw@, nlab@,
9017 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9019 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9022 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9025 # Can't set tabs! Other bugs (ANSI mode only):
9026 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9027 # is too much complex to be described);
9028 # - meta key can't be described (the terminal forgets it when reset);
9029 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9030 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9032 # dch1 has been commented out because it causes annoying glittering when
9033 # vi deletes one character at the beginning of a line with tabs in it.
9034 # dch makes sysgen(1M) have a horrible behaviour when deleting
9035 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9036 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9037 # not, so smir and rmir are commented out as well.
9038 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9039 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9040 am, km, mc5i, mir, msgr, xenl,
9041 cols#80, it#8, lines#25, vt#3,
9042 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9043 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9044 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9045 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9046 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9047 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9048 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9049 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9050 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9051 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9052 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9053 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9054 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9055 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9056 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9057 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9058 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9059 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9060 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9061 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9062 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9063 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9064 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9066 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9067 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9068 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9070 # This is the american terminal. Here tabs work fine.
9071 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9072 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9073 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9075 # This terminal (firmware version 02) has a lot of bugs:
9077 # - other bugs in ANSI modes (see above).
9078 # This description disables handshaking when using cup. This is because
9079 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9080 # cannot be used at speeds greater than 9600 baud, because at greater
9081 # speeds handshaking is needed even for character sending. If you use
9082 # DTR handshaking, you can use even greater speeds.
9083 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9084 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9085 am, bw, hs, km, mc5i, mir, msgr, xon,
9086 cols#80, it#8, lines#25, wsl#46,
9087 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9088 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9089 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9090 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9091 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9092 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9093 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9095 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9096 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9097 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9098 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9099 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9100 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9101 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9102 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9103 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9104 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9105 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9106 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9107 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9108 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9110 # This is the american terminal. Here tabs work.
9111 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9112 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9113 hts=\E1, tbc=\E0, use=wy99f,
9116 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9117 # The reset strings are slow and the pad times very depending
9118 # on other parameters such as font loading. I have tried
9119 # to follow the following outline:
9121 # <rs1> -> set personality
9122 # <rs2> -> set number of columns
9123 # <rs3> -> set number of lines
9124 # <is1> -> select the proper font
9125 # <is2> -> do the initialization
9126 # <is3> -> set up display memory (2 pages)
9128 # The display memory may be used for either text or graphics.
9129 # When "Display Memory = Shared" the terminal will have more pages
9130 # but garbage may be left on the screen when you switch from
9131 # graphics to text. If "Display Memory = Unshared" then the
9132 # text area will be only one page long.
9134 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9135 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9136 wy160|wyse160|Wyse 160,
9137 am, bw, hs, km, mc5i, mir, msgr,
9138 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9139 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9140 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9141 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9142 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9143 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9144 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9145 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9146 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9147 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9148 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9149 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9150 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9151 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9152 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9153 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9154 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9155 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9156 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9157 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9158 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9159 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9160 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9161 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9162 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9163 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9164 tbc=\E0, tsl=\EF, use=adm+sgr,
9166 wy160-w|wyse160-w|wyse 160 132-column,
9167 cols#132, lw#7, nlab#16, wsl#90,
9168 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9169 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9171 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
9172 lh@, lines#25, lw@, nlab@,
9173 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9174 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
9175 lh@, lines#25, lw@, nlab@,
9176 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9178 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
9180 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
9181 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
9182 rs3=\Ee*$<150>, use=wy160,
9183 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
9184 cols#132, lw#7, nlab#16, wsl#90,
9185 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
9186 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9188 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
9189 lh@, lines#43, lw@, nlab@,
9190 pln@, rs3=\Ee+$<150>, use=wy160-42,
9191 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
9192 lh@, lines#43, lw@, nlab@,
9193 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9195 wy160-vb|wyse160-vb|Wyse 160 visible bell,
9197 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
9200 # The Wyse 75 is a vt100 lookalike without advanced video.
9202 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
9203 # Underline) without magic cookies. The following description
9204 # uses this capability, but when more than one attribute is
9205 # put on the screen at once, all attributes will be changed
9206 # to be the same as the last attribute given.
9207 # The Wyse 75 can support more attributes when used with magic
9208 # cookies. The wy75-mc terminal description uses magic cookies
9209 # to correctly handle multiple attributes on a screen.
9211 wy75|wyse75|wyse 75,
9212 am, hs, mc5i, mir, msgr, xenl, xon,
9213 cols#80, lines#24, ma#1, pb#1201, wsl#78,
9214 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9215 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
9216 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
9217 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9218 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9219 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
9220 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
9221 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
9222 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
9223 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
9224 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9225 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9226 ind=\n$<2>, ip=$<1>,
9227 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
9228 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
9229 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
9230 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9231 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9232 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
9233 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
9234 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9235 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
9236 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
9237 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
9238 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
9239 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
9241 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
9242 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9243 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
9244 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9246 # This terminal description uses the non-hidden attribute mode
9247 # (with magic cookie).
9249 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
9252 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
9253 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
9254 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
9255 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
9257 wy75-vb|wyse75-vb|wyse 75 with visible bell,
9260 wy75-w|wyse75-w|wyse 75 in 132 column mode,
9262 rs2=\E[35h\E[?3h$<80>, use=wy75,
9263 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
9267 # Wyse 85 emulating a vt220 7 bit mode.
9268 # 24 line screen with status line.
9270 # The vt220 mode permits more function keys but it wipes out
9271 # the escape key. I strongly recommend that <f11> be set to
9273 # The terminal may have to be set for 8 data bits and 2 stop
9274 # bits for the arrow keys to work.
9275 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
9276 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
9277 # <dch> leave trash on the screen when used without XON/XOFF.
9279 wy85|wyse85|wyse 85,
9280 am, hs, mc5i, mir, msgr, xenl, xon,
9281 cols#80, it#8, lines#24, wsl#80,
9282 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9283 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9284 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9285 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9286 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9287 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9288 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9289 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9290 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9291 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9292 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9293 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9294 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9295 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9296 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9297 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
9298 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9299 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9300 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
9301 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
9302 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
9303 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9304 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9305 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9306 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9308 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9309 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9310 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9311 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9313 # Wyse 85 with visual bell.
9314 wy85-vb|wyse85-vb|wyse 85 with visible bell,
9315 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9317 # Wyse 85 in 132-column mode.
9318 wy85-w|wyse85-w|wyse 85 in 132-column mode,
9320 rs2=\E[35h\E[?3h$<70>, use=wy85,
9322 # Wyse 85 in 132-column mode with visual bell.
9323 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
9326 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
9327 # This copes with an apparent firmware bug in the wy85. He writes:
9328 # "What I did was change leave the terminal cursor keys set to Normal
9329 # (instead of application), and change \E[ to \233 for all the keys in
9330 # terminfo. At one point, I found some reference indicating that this
9331 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
9332 # me), but I can't find that and the server under my bookmark to "Wyse
9333 # Technical" isn't responding. So there's the question of wether the wy85
9334 # terminfo should reflect the manufactuer's intended behaviour of the terminal
9336 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
9337 am, hs, mc5i, mir, msgr, xenl, xon,
9338 cols#80, it#8, lines#24, wsl#80,
9339 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9340 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9341 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9342 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9343 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9344 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9345 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9346 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9347 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9348 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9349 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9350 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9351 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9352 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9353 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
9354 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
9355 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
9356 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
9357 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
9358 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
9359 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
9360 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
9361 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
9362 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9363 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9364 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9365 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9367 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
9368 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9369 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9370 tsl=\E[40h\E7\E[25;%i%p1%dH,
9372 # Wyse 185 emulating a vt320 7 bit mode.
9374 # This terminal always displays 25 lines. These lines may be used
9375 # as 24 data lines and a terminal status line (top or bottom) or
9376 # 25 data lines. The 48 and 50 line modes change the page size
9377 # and not the number of lines on the screen.
9379 # The Compose Character key can be used as a meta key if changed
9382 wy185|wyse185|wyse 185,
9383 am, hs, km, mc5i, mir, msgr, xenl, xon,
9384 cols#80, it#8, lines#24, wsl#80,
9385 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9386 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9387 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9388 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9389 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9390 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9391 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
9392 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9393 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
9394 el=\E[K, el1=\E[1K, enacs=\E)0,
9395 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
9396 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
9397 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
9398 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9399 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
9400 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9401 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
9402 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9403 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9404 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
9405 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9406 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
9407 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
9408 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
9409 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
9410 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9411 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9412 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9413 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9414 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9415 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9416 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
9419 # Wyse 185 with 24 data lines and top status (terminal status)
9420 wy185-24|wyse185-24|wyse 185 with 24 data lines,
9422 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9425 # Wyse 185 with visual bell.
9426 wy185-vb|wyse185-vb|wyse 185+flash,
9429 # Wyse 185 in 132-column mode.
9430 wy185-w|wyse185-w|wyse 185 in 132-column mode,
9432 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9433 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9435 # Wyse 185 in 132-column mode with visual bell.
9436 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9439 # wy325 terminfo entries
9440 # Done by Joe H. Davis 3-9-92
9442 # lines 25 columns 80
9444 wy325|wyse325|Wyse epc,
9445 am, bw, hs, mc5i, mir,
9446 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9447 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9448 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9449 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9450 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9451 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9452 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9453 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9454 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9455 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9456 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9457 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9458 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9459 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9460 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9461 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9462 mc0=\EP, mc4=^T, mc5=\Ed#,
9463 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9464 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9465 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9466 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9467 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9469 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9470 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9471 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9472 tsl=\EF, use=adm+sgr,
9475 # lines 24 columns 80 vb
9477 wy325-vb|wyse325-vb|wyse-325 with visual bell,
9481 # lines 24 columns 132
9483 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9484 cols#132, lw#7, nlab#16, wsl#97,
9485 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9486 rs2=\E`;$<70>, use=wy325,
9488 # lines 25 columns 80
9490 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9491 lh@, lines#25, lw@, nlab@,
9492 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9494 # lines 25 columns 132
9496 wy325-25w|wyse325-25w|wy325 132 columns,
9497 lh@, lines#25, lw@, nlab@,
9498 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9500 # lines 25 columns 132 vb
9502 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9506 # lines 42 columns 80
9508 wy325-42|wyse325-42|wyse-325 42 lines,
9509 lh@, lines#42, lw@, nlab@,
9510 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9512 # lines 42 columns 132
9514 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9515 lh@, lines#42, lw@, nlab@,
9516 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9518 # lines 42 columns 132 vb
9520 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9523 # lines 43 columns 80
9525 wy325-43|wyse325-43|wyse-325 43 lines,
9526 lh@, lines#43, lw@, nlab@,
9529 # lines 43 columns 132
9531 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9532 lh@, lines#43, lw@, nlab@,
9533 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9535 # lines 43 columns 132 vb
9537 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9540 # Wyse 370 -- 24 line screen with status line.
9542 # The terminal may have to be set for 8 data bits and 2 stop
9543 # bits for the arrow keys to work.
9545 # If you change keyboards the terminal will send different
9547 # The following definition is for the basic terminal without
9550 # <u0> -> enter Tektronix 4010/4014 mode
9551 # <u1> -> exit Tektronix 4010/4014 mode
9552 # <u2> -> enter ASCII mode (from any ANSI mode)
9553 # <u3> -> exit ASCII mode (goto native ANSI mode)
9554 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9555 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
9557 # Bug: The <op> capability resets attributes.
9558 wy370-nk|wyse 370 without function keys,
9559 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9560 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9561 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9562 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9563 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9564 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9565 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9566 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9567 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9568 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9569 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9570 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9571 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9572 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9573 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9575 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9576 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9577 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9578 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9580 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9581 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9582 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9583 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9584 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9585 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9586 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9587 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9588 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9589 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9590 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9591 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9593 # Function key set for the ASCII (wy-50 compatible) keyboard
9594 # This is the default 370.
9596 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9597 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9598 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9599 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9600 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9601 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9602 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9603 knp=\E[U, kpp=\E[V, use=wy370-nk,
9605 # Function key set for the VT-320 (and wy85) compatible keyboard
9607 wy370-105k|Wyse 370 with 105 key keyboard,
9608 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9609 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9610 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9611 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9612 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9613 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9614 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9615 use=wy370-nk, use=vt220+keypad,
9617 # Function key set for the PC compatible keyboard
9619 wy370-EPC|Wyse 370 with 102 key keyboard,
9620 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9621 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9622 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9623 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9624 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9626 # Wyse 370 with visual bell.
9627 wy370-vb|Wyse 370 with visible bell,
9630 # Wyse 370 in 132-column mode.
9631 wy370-w|Wyse 370 in 132-column mode,
9633 rs2=\E[35h\E[?3h$<70>, use=wy370,
9635 # Wyse 370 in 132-column mode with visual bell.
9636 wy370-wvb|Wyse 370 with visible bell 132-columns,
9637 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9638 wy370-rv|Wyse 370 reverse video,
9639 rs3=\E[32h\E[?5h, use=wy370,
9641 # Wyse 99gt Tektronix 4010/4014 emulator,
9643 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9646 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9647 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9649 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9651 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9652 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9654 # Wyse 160 Tektronix 4010/4014 emulator,
9656 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9657 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9658 home=^]8`g @\037, use=wy99gt-tek,
9660 # Wyse 370 Tektronix 4010/4014 emulator,
9662 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9665 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9666 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9668 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9670 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9671 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9672 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9674 # Vendor-supplied Wyse entries end here.
9677 #TITLE: TERMINFO ENTRY WY520
9679 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9680 # BBS with the addition of more function keys and special keys.
9682 # rs1 -> set personality
9683 # rs2 -> set number of columns
9684 # rs3 -> set number of lines
9685 # is1 -> select the proper font
9686 # is2 -> do the initialization
9687 # is3 -> If this string is empty then rs3 gets sent.
9689 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9690 # - The BS key is programmed to generate BS in smcup since
9691 # is2 doesn't seem to work.
9692 # - Remove and shift/Remove: delete a character
9693 # - Insert : enter insert mode
9694 # - Find : delete to end of file
9695 # - Select : clear a line
9696 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9698 # - Bottom status line (host writable line) is used.
9699 # - smkx,rmkx are removed because this would put the numeric
9700 # keypad in Dec application mode which doesn't seem to work
9701 # with SCO applications.
9703 wy520|wyse520|wyse 520,
9704 am, hs, km, mc5i, mir, xenl, xon,
9705 cols#80, it#8, lines#24, wsl#80,
9706 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9707 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9708 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9709 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9710 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9711 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9712 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9713 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9714 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9715 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9716 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9717 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9718 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9719 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9720 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9721 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9722 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9723 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9724 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9725 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9726 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9727 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9728 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9729 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9730 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9731 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9732 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9733 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9734 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9735 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9736 vpa=\E[%i%p1%dd, use=vt220+keypad,
9738 # Wyse 520 with 24 data lines and status (terminal status)
9739 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9741 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9744 # Wyse 520 with visual bell.
9745 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9746 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9748 # Wyse 520 in 132-column mode.
9749 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9751 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9752 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9754 # Wyse 520 in 132-column mode with visual bell.
9755 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9756 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9759 # Wyse 520 emulating a vt420 7 bit mode.
9760 # The DEL key is programmed to generate BS in is2.
9761 # With EPC keyboard.
9762 # - 'End' key will clear till end of line on EPC keyboard
9763 # - Shift/End : ignored.
9764 # - Insert : enter insert mode.
9765 # - Delete : delete a character (have to change interrupt character
9766 # to CTRL-C: stty intr '^c') for it to work since the
9767 # Delete key sends 7FH.
9768 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9769 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9770 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9773 # Wyse 520 with 24 data lines and status (terminal status)
9774 # with EPC keyboard.
9775 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9777 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9780 # Wyse 520 with visual bell.
9781 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9782 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9784 # Wyse 520 in 132-column mode.
9785 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9787 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9788 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9790 # Wyse 520 in 132-column mode with visual bell.
9791 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9792 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9794 # Wyse 520 in 80-column, 36 lines
9795 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9798 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9801 # Wyse 520 in 80-column, 48 lines
9802 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9805 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9808 # Wyse 520 in 132-column, 36 lines
9809 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9812 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9815 # Wyse 520 in 132-column, 48 lines
9816 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9819 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9823 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9824 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9827 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9830 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9831 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9834 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9837 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9838 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9841 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9844 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9845 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9848 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9851 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9852 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9853 # file and we don't know what <hts> is -- esr)
9854 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9856 cols#80, it#8, lines#24,
9857 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9858 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9859 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9860 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9861 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9862 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9865 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9866 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9867 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9868 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9871 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9872 wy100q|Wyse 100 for Quotron,
9874 cols#80, lines#24, xmc#1,
9875 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9876 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9877 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9878 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9879 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9881 #### Kermit terminal emulations
9883 # Obsolete Kermit versions may be listed in the section describing obsolete
9884 # non-ANSI terminal emulators later in the file.
9887 # KERMIT standard all versions.
9888 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9889 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9890 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9891 kermit|standard kermit,
9894 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9895 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9896 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9897 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9898 kermit-am|standard kermit plus auto-margin,
9900 is2=K1 Standard Kermit plus Automatic Margins\n,
9903 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9904 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9906 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9907 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9910 clear=\EH\EJ, ed@, el@,
9911 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9913 # Cannot use line 25, now acts funny like ansi special scrolling region.
9914 # Initialization must escape from that region by cursor position to line 24.
9915 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9916 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9917 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9918 pckermit120|UCB IBMPC Kermit 1.20,
9920 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9922 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9923 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9924 # MS-DOS Kermit 2.27 for the IBMPC
9925 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9926 # Cannot use line 25, now acts funny like ansi special scrolling region.
9927 # Initialization must escape from that region by cursor position to line 24.
9928 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9929 # Reverse video for standout like H19.
9930 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9931 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9932 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9934 cols#80, it#8, lines#24,
9935 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9936 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9937 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9938 home=\EH, ht=^I, il1=\EL,
9939 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9940 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9941 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9942 # MS-DOS Kermit 2.27 with automatic margins
9943 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9944 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9946 cvvis=\EO\Eq\EG\EvK5,
9947 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9949 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9950 # Automatic margins now default. Use ansi <sgr> for highlights.
9951 # Define function keys.
9952 # (msk22714: removed obsolete ":kn#10:" -- esr)
9953 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9954 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9956 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9957 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9958 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9959 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9960 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9961 # This was designed for a VT320 emulator, but it is probably a good start
9962 # at support for the VT320 itself.
9963 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9964 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9965 vt320-k3|MS-Kermit 3.00's vt320 emulation,
9966 am, eslok, hs, km, mir, msgr, xenl,
9967 cols#80, it#8, lines#49, pb#9600, vt#3,
9968 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9969 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9970 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9971 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9972 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9973 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9974 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9975 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9976 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9977 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9978 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9979 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9980 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9981 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9982 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9983 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9984 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9985 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9986 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9987 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9988 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9989 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9990 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9991 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
9992 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9993 vt320-k311|dec vt320 series as defined by kermit 3.11,
9994 am, eslok, hs, mir, msgr, xenl, xon,
9995 cols#80, it#8, lines#24, vt#3,
9996 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9997 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9998 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9999 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10000 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10001 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10002 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10003 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10004 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10005 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10006 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10007 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10008 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10009 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10010 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10011 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10012 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10013 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10014 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10015 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10017 ######## NON-ANSI TERMINAL EMULATIONS
10022 # These entries attempt to describe Avatar, a terminal emulation used with
10023 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10024 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10025 # excessively dependent on PC idiosyncracies, but apparently rather popular
10026 # in the BBS world.
10028 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10029 # models that terminfo knows about. An Avatar color attribute is the
10030 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10032 # I wrote these entries while looking at the Avatar spec. I don't have
10033 # the facilities to test them. Let me know if they work, or don't.
10035 # Avatar escapes not used by these entries (because maybe you're smarter
10036 # and more motivated than I am and can figure out how to wrap terminfo
10037 # around some of them, and because they are weird enough to be funny):
10039 # ^L -- clear window/reset current attribute to default
10040 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10042 # bit: 6 5 4 3 2 1 0
10044 # +---+---+ | +---+---+
10046 # | | foreground color
10047 # | foreground intensity
10050 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10051 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10052 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10053 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10054 # (^V^L and ^V^M set the current attribute as a side-effect.)
10055 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10056 # in the pattern, <c> the number of times the pattern
10057 # should be repeated. If either value is 0, no-op.
10058 # The pattern can contain Avatar console codes,
10059 # including other ^V ^Y patterns.
10061 # ^V^O -- clockwise mode on; turn print direction right each time you
10062 # hit a window edge (yes, really). Turned off by CR
10064 # ^V^Q%c -- query the driver
10065 # ^V^R -- driver reset
10066 # ^V^S -- Sound tone (PC-specific)
10067 # ^V^T -- change highlight at current cursor poition to %c
10068 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10069 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10072 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10073 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10074 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10075 # which is the only method that will actually work for multiple highlights.)
10077 # Update by TD - 2004: half of this was inconsistent. Found documentation
10078 # and repaired most of the damage. sgr0 is probably incorrect, but the
10079 # available documentation gives no clues for a workable string.
10080 avatar0|avatar terminal emulator level 0,
10082 cols#80, it#8, lines#25,
10083 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10084 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10085 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10087 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10088 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10090 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10091 avatar0+|avatar terminal emulator level 0+,
10092 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10093 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10094 avatar|avatar1|avatar terminal emulator level 1,
10095 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10096 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10100 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10101 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10102 # '90s), especially in the BBS world, and still has some loyal users due to
10103 # its very small memory footprint and to a cute macro language.
10104 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10105 am, bw, mir, msgr, xenl,
10106 cols#80, it#8, lines#25,
10107 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10108 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10109 cub1=^H, cud1=^C, cuf1=^B,
10110 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10111 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10112 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10113 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10114 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10115 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10116 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10117 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10118 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10119 rbcomm-nam|IBM PC with RBcomm without autowrap,
10121 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10122 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10123 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10124 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10126 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10127 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10128 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10130 ######## LCD DISPLAYS
10133 #### Matrix Orbital
10134 # from: Eric Z. Ayers (eric@ale.org)
10136 # Matrix Orbital 20x4 LCD display
10137 # Command Character is 0xFE (decimal 254, octal 376)
10139 # On this device, cursor addressability isn't possible. The LCD expects:
10140 # 0xfe G <col> <row>
10141 # for cup: %p1 == row and %p2 is column
10144 # cup=\376G%p2%c%p1%c
10145 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10146 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10148 # Alas, there is no cursor upline capability on this display.
10150 # These entries add some 'sanity stuff' to the clear function. That is, it
10151 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10152 # and turns off the cursor blinking and stuff like that.
10154 # NOTE: calling 'beep' turns on the backlight (bell)
10155 # NOTE: calling 'flash' turns it on and back off (visual bell)
10157 MtxOrb|Generic Matrix Orbital LCD display,
10158 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10159 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10160 flash=\376B\001$<200>\376F, home=\376H,
10161 MtxOrb204|20x4 Matrix Orbital LCD display,
10162 cols#20, lines#4, use=MtxOrb,
10163 MtxOrb162|16x2 Matrix Orbital LCD display,
10164 cols#16, lines#2, use=MtxOrb,
10167 ######## OLDER TERMINAL TYPES
10169 # This section is devoted to older commercial terminal brands that are now
10170 # discontinued, but known to be still in use or represented by emulations.
10173 #### AT&T (att, tty)
10175 # This section also includes Teletype-branded VDTs.
10177 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
10178 # Boundless Technologies); for details, see the header comment on the ADDS
10181 # These are AT&T's official terminfo entries. All-caps aliases have been
10184 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
10185 am, eo, mir, msgr, xon,
10186 cols#80, it#8, lines#24,
10187 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
10188 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10189 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10190 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10191 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10192 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10193 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10194 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
10195 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
10196 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
10197 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
10198 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10199 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
10201 att2350|AT&T 2350 Video Information Terminal 80 column mode,
10202 mc0@, mc4@, mc5@, use=att2300,
10204 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10205 # Seems upward compatible with vt100, plus ins/del line/char.
10206 # On sgr, the protection parameter is ignored.
10207 # No check is made to make sure that only 3 parameters are output.
10208 # standout= reverse + half-intensity = 3 | 5.
10209 # bold= reverse + underline = 2 | 3.
10210 # note that half-bright blinking doesn't look different from normal blinking.
10211 # NOTE:you must program the function keys first, label second!
10212 # (att4410: a BSD entry has been seen with the following capabilities:
10213 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
10214 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
10215 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
10216 am, hs, mir, msgr, xon,
10217 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10218 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10219 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
10220 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
10221 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
10222 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
10223 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
10224 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
10225 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10226 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
10227 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
10228 ll=\E[24H, nel=^M^J,
10229 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
10230 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10231 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10233 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10234 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10235 tsl=\E7\E[25;%p1%{1}%+%dH,
10237 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
10239 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10241 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
10243 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
10246 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
10248 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10250 # 5410 in terms of a vt100
10251 # (v5410: added <rmam>/<smam> based on init string -- esr)
10252 v5410|att5410 in terms of a vt100,
10253 am, mir, msgr, xon,
10254 cols#80, it#8, lines#24, vt#3,
10255 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10256 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10257 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10258 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
10259 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
10260 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
10261 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
10262 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10263 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
10264 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
10265 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10267 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
10268 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10269 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10273 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
10274 # even! the 5420 has three modes: scroll, window or page mode
10275 # this terminfo should work in scroll or window mode, but doesn't
10276 # take advantage of any of the differences between them.
10278 # Has memory below (2 lines!)
10279 # 3 pages of memory (plus some spare)
10280 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
10281 # <hpa>, <hts> would work for these, but these work in both scroll and window
10282 # mode... Unset insert character so insert mode works
10283 # <is1> sets 80 column mode,
10284 # <is2> escape sequence:
10285 # 1) turn off all fonts
10286 # 2) function keys off, keyboard lock off, control display off,
10287 # insert mode off, erasure mode off,
10288 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
10289 # 4) reset origin mode
10290 # 5) set line wraparound
10291 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
10293 # 8) program ENTER to transmit ^J,
10294 # We use \212 to program the ^J because a bare ^J will get translated by
10295 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10297 # <is3> set screen color to black,
10298 # No representation in terminfo for the delete word key: kdw1=\Ed
10299 # Key capabilities assume the power-up send sequence...
10300 # This <rmcup> is not strictly necessary, but it helps maximize
10301 # memory usefulness: <rmcup=\Ez>,
10302 # Alternate sgr0: <sgr0=\E[m\EW^O>,
10303 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
10304 # smkx programs the SYS PF keys to send a set sequence.
10305 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
10306 # This string causes them to send the strings <kf1>-<kf8>
10307 # when pressed in SYS PF mode.
10308 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
10309 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
10310 OTbs, db, mir, xon,
10311 lh#2, lm#78, lw#8, nlab#8, wsl#55,
10312 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
10313 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
10314 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
10315 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
10316 flash=\E[?5h$<200>\E[?5l, home=\E[x,
10317 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
10318 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
10319 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
10320 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
10321 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
10322 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10323 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10324 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10325 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
10326 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
10327 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
10328 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
10329 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
10330 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
10331 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10332 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
10333 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
10334 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10337 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
10338 cols#132, lm#54, wsl#97,
10339 is1=\E[?3h$<100>, use=att4415,
10341 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
10342 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10344 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
10345 cols#132, lm#54, wsl#97,
10346 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
10349 # Note that this mode permits programming USER PF KEYS and labels
10350 # However, when you program user pf labels you have to reselect
10351 # user pf keys to make them appear!
10352 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
10353 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
10354 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
10355 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
10357 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
10358 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10361 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
10362 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10365 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
10366 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10369 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
10370 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10373 att5420_2|AT&T 5420 model 2 80 cols,
10374 am, db, hs, mir, msgr, xon,
10375 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10376 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10377 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
10378 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10379 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
10380 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
10381 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10382 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
10383 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10384 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
10385 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10386 indn=\E[%p1%dE, invis=\E[8m,
10387 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10388 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
10389 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
10390 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
10391 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
10392 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10393 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10394 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
10395 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
10396 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
10397 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
10398 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
10399 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10401 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10402 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
10403 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10404 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10405 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
10407 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10410 att4418|att5418|AT&T 5418 80 cols,
10413 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10414 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
10415 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10416 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10417 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
10418 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
10419 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
10420 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
10421 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
10422 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
10423 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
10424 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
10425 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
10426 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
10427 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10428 att4418-w|att5418-w|AT&T 5418 132 cols,
10430 is1=\E[?3h, use=att5418,
10432 att4420|tty4420|teletype 4420,
10433 OTbs, da, db, eo, msgr, ul, xon,
10434 cols#80, lines#24, lm#72,
10435 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10436 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10437 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10438 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10439 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10440 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10441 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10442 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10444 # The following is a terminfo entry for the Teletype 4424
10445 # asynchronous keyboard-display terminal. It supports
10446 # the vi editor. The terminal must be set up as follows,
10448 # HIGHLIGHT DEFINITION 3-TONE
10449 # DISPLAY FUNCTION GROUP III
10451 # The second entry below provides limited (a la adm3a)
10452 # operation under GROUP II.
10454 # This must be used with DISPLAY FUNCTION GROUP I or III
10455 # and HIGHLIGHT DEFINITION 3-TONE
10456 # The terminal has either bold or blink, depending on options
10458 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10459 att4424|tty4424|teletype 4424,
10462 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10463 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10464 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10465 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10466 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10467 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10468 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10469 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10470 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10471 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10472 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10474 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10475 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10478 att4424-1|tty4424-1|teletype 4424 in display function group I,
10479 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10482 # This entry is not one of AT&T's official ones, it was translated from the
10483 # 4.4BSD termcap file. The highlight strings are different from att4424.
10484 # I have no idea why this is -- older firmware version, maybe?
10485 # The following two lines are the comment originally attached to the entry:
10486 # This entry appears to avoid the top line - I have no idea why.
10487 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10488 att4424m|tty4424m|teletype 4424M,
10490 cols#80, it#8, lines#23,
10491 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10492 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10493 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10494 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10495 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10496 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10497 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10499 # The Teletype 5425 is really version 2 of the Teletype 5420. It
10500 # is quite similar, except for some minor differences. No page
10501 # mode, for example, so all of the <cup> sequences used above have
10502 # to change back to what's being used for the 5410. Many of the
10503 # option settings have changed their numbering as well.
10505 # This has been tested on a preliminary model.
10507 # (att5425: added <rmam>/<smam> based on the init string -- esr)
10508 att5425|tty5425|att4425|AT&T 4425/5425,
10509 am, da, db, hs, mir, msgr, xenl, xon,
10510 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10511 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10512 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10513 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10514 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10515 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10516 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10517 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10518 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10519 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10520 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10521 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10522 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10523 invis=\E[8m, is1=\E<\E[?3l$<100>,
10524 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10525 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10527 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10528 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10529 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10530 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10532 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10533 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10534 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10535 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10536 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10537 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10538 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10539 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10540 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10541 vpa=\E[%p1%{1}%+%dd,
10543 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10544 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10546 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10547 cols#132, lm#54, wsl#97,
10548 is1=\E[?3h$<100>, use=tty5425,
10550 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10551 # I also added <rmam>/<smam> -- esr)
10552 att4426|tty4426|teletype 4426S,
10554 cols#80, lines#24, lm#48,
10555 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10556 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10557 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10558 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10559 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
10560 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10561 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10562 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10563 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10564 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10565 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10566 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10567 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10568 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10569 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10570 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10573 # Terminfo entry for the AT&T 510 A Personal Terminal
10574 # Function keys 9 - 16 are available only after the
10575 # screen labeled (soft keys/action blocks) are labeled. Function key
10576 # 9 corresponds to the leftmost touch target on the screen,
10577 # function key 16 corresponds to the rightmost.
10579 # This entry is based on one done by Ernie Rice at Summit, NJ and
10580 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
10581 att510a|bct510a|AT&T 510A Personal Terminal,
10582 am, mir, msgr, xenl, xon,
10583 cols#80, lh#2, lines#24, lw#7, nlab#8,
10584 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10585 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10586 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10587 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10588 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10589 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10590 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10591 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10592 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10593 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10594 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10595 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10596 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10597 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10598 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10599 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10600 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10601 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10602 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10603 smul=\E[4m, tbc=\E[3g,
10605 # Terminfo entry for the AT&T 510 D Personal Terminal
10606 # Function keys 9 through 16 are accessed by bringing up the
10608 # Function key 9 corresponds to the leftmost touch target on the screen,
10609 # function key 16 corresponds to the rightmost.
10611 # There are problems with soft key labeling. These are due to
10612 # strangenesses in the native terminal that are impossible to
10613 # describe in a terminfo.
10614 att510d|bct510d|AT&T 510D Personal Terminal,
10615 am, da, db, mir, msgr, xenl, xon,
10616 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10617 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10618 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10619 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10620 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10621 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10622 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10623 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10624 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10625 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10626 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10627 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10628 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10629 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10630 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10631 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10632 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10633 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10634 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10635 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10636 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10637 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10638 rs2=\E[5;0|, sc=\E7,
10639 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10640 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10641 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10642 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10644 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10645 att500|att513|AT&T 513 using page mode,
10646 am, chts, mir, msgr, xenl, xon,
10647 cols#80, lh#2, lines#24, lw#8, nlab#8,
10648 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10649 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10650 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10651 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10652 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10654 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10655 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10656 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10657 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10658 indn=\E[%p1%dE, invis=\E[8m,
10659 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10660 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10661 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10662 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10663 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10664 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10665 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10666 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10667 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10668 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10669 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10670 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10671 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10672 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10673 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10674 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10675 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10676 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10678 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10679 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10680 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10681 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10682 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10683 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10684 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10686 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10687 rs2=\E[5;0|, sc=\E7,
10688 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10689 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10690 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10691 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10694 # printer must be set to EMUL ANSI to accept ESC codes
10695 # <cuu1> stops at top margin
10696 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10697 # and alt font ascii,wrap on,tabs cleared
10698 # <is2> disables newline on LF,Emphasized off
10699 # The <u0> capability sets form length
10700 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10702 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10703 orhi#100, orl#12, orvi#72,
10704 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10706 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10707 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10708 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10709 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10711 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10712 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10713 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10714 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10716 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10717 # The following SET-UP modes are assumed for normal operation:
10718 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10719 # Other SET-UP modes may be set for operator convenience or communication
10720 # requirements. This termcap description is for the Resident Terminal Mode.
10721 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10722 # The BRL entry also said: UNSAFE :ll=\E[70H:
10723 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10725 cols#88, it#8, lines#70, vt#3,
10726 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10727 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10728 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10729 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10730 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10731 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10732 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10735 # 5620 terminfo (2.0 or later ROMS with char attributes)
10736 # The following SET-UP modes are assumed for normal operation:
10737 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10738 # Other SET-UP modes may be set for operator convenience or communication
10739 # requirements. This termcap description is for Resident Terminal Mode. No
10740 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10741 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10742 # Be aware that older versions of the dmd have a firmware bug that affects
10743 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10744 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10745 # also has <ll>=\E[70H commented out and marked unsafe.
10746 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10747 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10748 OTbs, am, msgr, npc, xon,
10749 cols#88, it#8, lines#70,
10750 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10751 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10752 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10753 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10754 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10755 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10756 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10757 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10758 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10759 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10760 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10761 lines#24, use=att5620,
10762 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10763 lines#34, use=att5620,
10764 # 5620 layer running the "S" system's downloaded graphics handler:
10765 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10767 cols#80, it#8, lines#72,
10768 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10769 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10770 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10771 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10774 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10776 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10777 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10778 att605|AT&T 605 80 column 102key keyboard,
10780 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10781 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10782 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10783 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10784 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10785 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10786 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10787 il1=\E[L, ind=^J, invis=\E[8m,
10788 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10789 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10790 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10791 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10792 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10793 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10794 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10795 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10796 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10797 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10798 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10799 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10800 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10801 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10802 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10803 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10804 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10805 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10806 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10807 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10808 tsl=\E7\E[25;%i%p1%dx,
10809 att605-pc|ATT 605 in pc term mode,
10810 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10811 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10812 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10813 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10814 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10815 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10816 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10817 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10818 xonc=e, use=att605,
10819 att605-w|AT&T 605-w 132 column 102 key keyboard,
10821 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10823 # (att610: I added <rmam>/<smam> based on the init string. I also
10824 # added <indn> and <rin> because the BSD file says the att615s have them,
10825 # and the 615 is like a 610 with a big keyboard, and most of their other
10826 # smart terminals support the same sequence -- esr)
10827 att610|AT&T 610; 80 column; 98key keyboard,
10828 am, eslok, hs, mir, msgr, xenl, xon,
10829 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10830 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10831 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10832 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10833 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10834 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10835 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10836 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10837 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10838 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10839 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10840 indn=\E[%p1%dS, invis=\E[8m,
10841 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10842 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10843 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10844 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10845 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10846 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10847 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10849 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10850 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10851 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10852 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10853 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10854 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10855 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10856 att610-w|AT&T 610; 132 column; 98key keyboard,
10858 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10861 att610-103k|AT&T 610; 80 column; 103key keyboard,
10862 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10863 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10864 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10865 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10866 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10867 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10868 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10869 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10870 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10871 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10872 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10873 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10874 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10875 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10877 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10879 att615|AT&T 615; 80 column; 98key keyboard,
10880 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10881 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10882 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10883 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10884 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10885 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10886 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10887 att615-w|AT&T 615; 132 column; 98key keyboard,
10888 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10889 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10890 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10891 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10892 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10893 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10894 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10895 att615-103k|AT&T 615; 80 column; 103key keyboard,
10896 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10897 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10898 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10899 # (att620: I added <rmam>/<smam> based on the init string and
10900 # <rin>/<indn> from a BSD termcap -- esr)
10901 att620|AT&T 620; 80 column; 98key keyboard,
10902 am, eslok, hs, mir, msgr, xenl, xon,
10903 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10904 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10905 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10906 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10908 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10910 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10911 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10912 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10913 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10914 indn=\E[%p1%dS, invis=\E[8m,
10915 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10916 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10917 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10918 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10919 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10920 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10921 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10922 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10923 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10924 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10925 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10926 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10927 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10928 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10929 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10930 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10931 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10932 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10933 rs2=\Ec\E[?3l, sc=\E7,
10934 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10935 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10936 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10937 tsl=\E7\E[25;%i%p1%dx,
10938 att620-w|AT&T 620; 132 column; 98key keyboard,
10940 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10942 att620-103k|AT&T 620; 80 column; 103key keyboard,
10943 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10944 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10945 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10946 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10947 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10948 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10949 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10950 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10951 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10952 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10953 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10954 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10955 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10956 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10957 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10958 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10960 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10962 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10965 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10966 # The following SETUP modes are assumed for normal operation:
10967 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10968 # Font_Size=Large Non-Layers_Window_Cols=80
10969 # Non-Layers_Window_Rows=60
10970 # Other SETUP modes may be set for operator convenience or communication
10971 # requirements. Some capabilities assume a printer attached to the Aux EIA
10972 # port. This termcap description is for the Fixed Non-Layers Window. No
10973 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10974 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10975 att630|AT&T 630 windowing terminal,
10976 OTbs, am, da, db, mir, msgr, npc, xon,
10977 cols#80, it#8, lines#60, lm#0,
10978 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10979 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10980 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10981 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10982 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10983 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10984 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10985 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10986 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10987 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10988 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10989 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10990 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10991 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10992 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10993 rmul=\E[m, rs2=\Ec, sc=\E7,
10994 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10995 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10996 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10997 lines#24, use=att630,
10999 # This is the att700 entry for 700 native emulation of the AT&T 700
11000 # terminal. Comments are relative to changes from the 605V2 entry and
11001 # att730 on which the entry is based. Comments show the terminfo
11002 # capability name, termcap name, and description.
11004 # Here is what's going onm in the init string:
11005 # ESC [ 50;4| set 700 native mode (really is 605)
11006 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11007 # ESC [ 53;0| set GenFlow to Xon/Xoff
11008 # ESC [ 8 ;0| set CR on NL
11009 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11010 # ESC [ ? 4 l jump scroll
11011 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11012 # ESC [ ?13 l Labels on
11013 # ESC [ ?15 l parity check = no
11014 # ESC [ 13 l monitor mode off
11015 # ESC [ 20 l LF on NL (not CRLF on NL)
11016 # ESC [ ? 7 h autowrap on
11017 # ESC [ 12 h local echo off
11018 # ESC ( B GO = ASCII
11019 # ESC ) 0 G1 = Special Char & Line Drawing
11020 # ESC [ ? 31 l Set 7 bit controls
11022 # Note: Most terminals, especially the 600 family use Reverse Video for
11023 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11024 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11025 # standout mode with \E[m (all normal attributes). The 730 entry simply
11026 # exits reverse video which would leave other current attributes intact. It
11027 # was assumed the 730 entry to be more correct so rmso has changed. The
11028 # 605V2 has no sequences to turn individual attributes off, thus its setting
11029 # and the rmso/smso settings from the 730.
11031 # Note: For the same reason as above in rmso I changed exit under-score mode
11032 # to specifically turn off underscore, rather than return to all normal
11035 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11036 # capability as pfxl. It was changed here to pfx since pfxl
11037 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11038 # allows strings to be parameters and label values must be programmed as
11039 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11040 # and strings to be parameters. The 605V2 pfx entry should be examined later
11041 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11043 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11044 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11047 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11050 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11052 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11056 # modular 10 pin Connector
11057 # Left side Right side
11058 # Pin 1 2 3 4 5 6 7 8 9 10
11060 # Key (notch) at bottom
11072 # The manual is 189 pages and is loaded with details about the escape codes,
11073 # etc..... Available from AT&T CIC 800-432-6600...
11074 # ask for Document number 999-300-660..
11076 att700|AT&T 700 24x80 column display w/102key keyboard,
11077 am, eslok, hs, mir, msgr, xenl, xon,
11078 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11079 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11080 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11081 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11082 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11083 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11084 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11085 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11086 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11087 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11088 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11089 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11090 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11091 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11092 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11093 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11094 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11095 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11096 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11097 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11098 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11099 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11100 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11101 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11102 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11103 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11104 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11105 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11106 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11107 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11108 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11109 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11110 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11111 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11112 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11113 tsl=\E7\E[99;%i%p1%dx,
11115 # This entry was modified 3/13/90 by JWE.
11116 # fixes include additions of <enacs>, correcting <rep>, and modification
11117 # of <kHOM>. (See comments below)
11118 # att730 has status line of 80 chars
11119 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11120 # the <kf25> and up keys are used for shifted system Fkeys
11121 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11122 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11123 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11124 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11125 # 102, 102+1, or 122 key keyboards
11127 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11128 att730|AT&T 730 windowing terminal,
11129 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11130 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11131 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11132 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11133 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11134 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11135 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11136 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11137 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11138 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11139 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11140 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11141 ind=\ED, invis=\E[8m,
11142 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11143 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11144 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11145 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11146 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11147 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11148 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11149 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11150 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11151 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11152 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11153 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11154 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11155 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11156 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11157 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11158 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11159 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11160 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11161 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11162 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11163 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11164 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11165 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11166 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11167 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
11168 lines#41, use=att730,
11169 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
11170 lines#24, use=att730,
11171 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
11172 flash=\E[?5l$<200>\E[?5h,
11173 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
11175 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
11176 lines#41, use=att730r,
11177 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
11178 lines#24, use=att730r,
11180 # The following represents the screen layout along with the associated
11181 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
11182 # not appear on the screen but are shown to reference the bezel buttons.
11183 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
11184 # position relative to the screen.
11188 # +----------------------------------------------------------------+
11190 # XXXX | kf0 kf24 | XXXX
11193 # XXXX | kf1 kf23 | XXXX
11196 # XXXX | kf2 kf22 | XXXX
11199 # XXXX | kf3 kf21 | XXXX
11202 # XXXX | kf4 kf20 | XXXX
11205 # XXXX | kf5 kf19 | XXXX
11208 # XXXX | kf6 kf18 | XXXX
11214 # +----------------------------------------------------------------+
11216 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
11218 # Note: XXXX represents the screen buttons
11224 # The character string sent by key 'kf26' may be user programmable
11225 # to send either \E[16s, or \E[26s.
11226 # The character string sent by key 'krfr' may be user programmable
11227 # to send either \E[17s, or \E[27s.
11229 # Depression of the "CMD" key sends \E! (kcmd)
11230 # Depression of the "MAIL" key sends \E[26s (kf26)
11231 # "REDRAW" same as "REFRESH" (krfr)
11233 # "kf" functions adds carriage return to output string if terminal is in
11236 # The following are functions not covered in the table above:
11238 # Set keyboard character (SKC): \EPn1;Pn2w
11239 # Pn1= 0 Back Space key
11241 # Pn2= Program char (hex)
11243 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
11244 # Pn1= Window number (1-39)
11245 # Pn2-Pn5= Y;X;Y;X coordinates
11247 # Screen Selection (SSL): \E[Pnu
11248 # Pn= Window number
11250 # Set Terminal Modes (SM): \E[Pnh
11251 # Pn= 3 Graphics mode
11252 # Pn= > Cursor blink
11253 # Pn= < Enter new line mode
11254 # Pn= = Enter reverse insert/replace mode
11255 # Pn= ? Enter no scroll mode
11257 # Reset Terminal Mode (RM): \E[Pnl
11258 # Pn= 3 Exit graphics mode
11259 # Pn= > Exit cursor blink
11260 # Pn= < Exit new line mode
11261 # Pn= = Exit reverse insert/replace mode
11262 # Pn= ? Exit no scroll mode
11264 # Screen Status Report (SSR): \E[Pnp
11265 # Pn= 0 Request current window number
11266 # Pn= 1 Request current window dimensions
11268 # Device Status Report (DSR): \E[6n Request cursor position
11270 # Call Status Report (CSR): \E[Pnv
11271 # Pn= 0 Call failed
11272 # Pn= 1 Call successful
11274 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
11275 # Pn1= Button number to be loaded
11276 # Pn2= Character count of "string"
11277 # Pn3= Key mode being loaded:
11281 # String= Text string (15 chars max)
11283 # Screen Number Report (SNR): \E[Pnp
11284 # Pn= Screen number
11286 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
11287 # Pn1= Number of rows available in window
11288 # Pn2= Number of columns available in window
11290 # Cursor Position Report (CPR): \E[Pn1;Pn2R
11291 # Pn1= "Y" Position of cursor
11292 # Pn2= "X" Position of cursor
11294 # Request Answer Back (RAB): \E[c
11296 # Answer Back Response (ABR): \E[?;*;30;VSV
11297 # *= 0 No printer available
11298 # *= 2 Printer available
11299 # V= Software version number
11300 # SV= Software sub version number
11301 # (printer-available field not documented in v1)
11303 # Screen Alignment Aid: \En
11305 # Bell (lower pitch): \E[x
11307 # Dial Phone Number: \EPdstring\
11308 # string= Phone number to be dialed
11310 # Set Phone Labels: \EPpstring\
11311 # string= Label for phone buttons
11313 # Set Clock: \EPchour;minute;second\
11315 # Position Clock: \EPsY;X\
11316 # Y= "Y" coordinate
11317 # X= "X" coordinate
11319 # Delete Clock: \Epr\
11321 # Programming The Function Buttons: \EPfPn;string\
11322 # Pn= Button number (00-06, 18-24)
11323 # (kf00-kf06, kf18-kf24)
11324 # string= Text to sent on button depression
11326 # The following in version 2 only:
11328 # Request For Local Directory Data: \EPp12;\
11330 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
11332 # Request for Local Directory Data in print format: \EPp13;\
11334 # Enable 'Prt on Line' mode: \022 (DC2)
11336 # Disable 'Prt on Line' mode: \024 (DC4)
11340 # The following Terminfo entry describes functions which are supported by
11341 # the AT&T 5430/pt505 terminal software version 2 and later.
11342 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
11344 cols#80, it#8, lines#24,
11345 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11346 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
11347 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
11348 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11349 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11350 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11351 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
11352 il=\E[%p1%dL, il1=\E[L, ind=^J,
11353 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
11354 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11355 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
11356 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
11357 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
11358 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
11359 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11360 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
11361 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
11362 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
11364 # The following Terminfo entry describes functions which are supported by
11365 # the AT&T 5430/pt505 terminal software version 1.
11366 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
11368 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
11369 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
11370 lines#22, use=att505,
11372 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
11373 # This cut mark helps make life less painful for people running ncurses tic
11374 # on machines with relatively little RAM. The file can be broken in half here
11375 # cleanly and compiled in sections -- no `use' references cross this cut
11379 #### Ampex (Dialogue)
11381 # Yes, these are the same people who are better-known for making audio- and
11382 # videotape. I'm told they are located in Redwood City, CA.
11385 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
11386 # (ampex80: some capabilities merged in from SCO's entry -- esr)
11387 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
11389 cols#80, it#8, lines#24,
11390 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
11391 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11392 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
11393 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
11394 smso=\Ej, smul=\El, tbc=\E3,
11395 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
11396 ampex175|ampex d175,
11399 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11400 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11401 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
11402 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
11403 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
11404 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
11405 # No backspace key in the main QWERTY cluster. Fortunately, it has a
11406 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
11407 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
11408 # mode), this key can be used as the erase key; I find I like this. Because
11409 # some people and some systems may not, there is another termcap ("ampex175")
11410 # that suppresses this little eccentricity by omitting the relevant capability.
11411 ampex175-b|ampex d175 using left arrow for erase,
11412 kbs=^_, use=ampex175,
11413 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
11414 # (ampex210: removed obsolete ":kn#10:" -- esr)
11415 ampex210|a210|ampex a210,
11416 OTbs, am, hs, xenl,
11417 cols#80, it#8, lines#24, xmc#1,
11418 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
11419 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11420 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
11421 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
11422 if=/usr/share/tabset/std, il1=\EE, invis@,
11423 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
11424 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
11425 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
11426 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
11427 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
11428 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
11429 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
11430 # and moved the padding to be *after* the caps -- esr)
11431 ampex219|ampex-219|amp219|Ampex with Automargins,
11433 cols#80, it#8, lines#24,
11434 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
11435 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
11436 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
11437 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
11438 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
11439 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
11440 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11441 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
11442 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
11443 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
11444 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
11445 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
11446 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
11447 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
11448 cols#132, lines#24,
11449 bel=^G, cr=^M, cud1=^J, ind=^J,
11450 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11451 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
11452 ampex232|ampex-232|Ampex Model 232,
11454 cols#80, lines#24, xmc#1,
11455 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
11456 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11457 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
11458 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
11459 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
11460 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
11461 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
11462 kf9=^AI\r, khome=^^, use=adm+sgr,
11463 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
11464 ampex232w|Ampex Model 232 / 132 columns,
11465 cols#132, lines#24,
11466 is2=\E\034Eg\El, use=ampex232,
11468 #### Ann Arbor (aa)
11470 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11471 # numbers of function keys. At least some used monitors in portrait mode,
11472 # allowing up to 76-character screen heights! They were reachable at:
11474 # Ann Arbor Terminals
11475 # 6175 Jackson Road
11476 # Ann Arbor, MI 48103
11479 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
11480 # can't be found on the Web; I fear they're long dead. R.I.P.
11484 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
11485 # Highly modified 6/22 by Mike O'Brien.
11486 # split out into several for the various screen sizes by dave-yost@rand
11487 # Modifications made 3/82 by Mark Horton
11488 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
11489 # status line moved to top of screen, <flash> removed 5/82
11490 # Some unknown person at SCO then hacked the init strings to make them more
11493 # assumes the following setup:
11494 # A menu: 0000 1010 0001 0000
11495 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11496 # C menu: 56 66 0 0 9600 0110 1100
11497 # D menu: 0110 1001 1 0
11499 # Briefly, the settings are for the following modes:
11500 # (values are for bit set/clear with * indicating our preference
11501 # and the value used to test these termcaps)
11502 # Note that many of these settings are irrelevent to the terminfo
11503 # and are just set to the default mode of the terminal as shipped
11506 # A menu: 0000 1010 0001 0000
11507 # Block/underline cursor*
11508 # blinking/nonblinking cursor*
11509 # key click/no key click*
11510 # bell/no bell at column 72*
11512 # key pad is cursor control*/key pad is numeric
11513 # return and line feed/return for <cr> key *
11514 # repeat after .5 sec*/no repeat
11515 # repeat at 25/15 chars per sec. *
11517 # hold data until pause pressed/process data unless pause pressed*
11518 # slow scroll/no slow scroll*
11519 # Hold in area/don't hold in area*
11520 # functions keys have default*/function keys disabled on powerup
11522 # show/don't show position of cursor during page transmit*
11527 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11528 # Baud rate (9600*)
11530 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
11531 # 1 stop bit*/2 stop bits
11532 # parity error detection off*/on
11534 # keyboard local/on line*
11535 # half/full duplex*
11536 # disable/do not disable keyboard after data transmission*
11538 # transmit entire page/stop transmission at cursor*
11539 # transfer/do not transfer protected characters*
11540 # transmit all characters/transmit only selected characters*
11541 # transmit all selected areas/transmit only 1 selected area*
11543 # transmit/do not transmit line separators to host*
11544 # transmit/do not transmit page tab stops tabs to host*
11545 # transmit/do not transmit column tab stop tabs to host*
11546 # transmit/do not transmit graphics control (underline,inverse..)*
11548 # enable*/disable auto XON/XOFF control
11549 # require/do not require receipt of a DC1 from host after each LF*
11550 # pause key acts as a meta key/pause key is pause*
11558 # XON character (17*)
11559 # XOFF character (19*)
11561 # C menu: 56 66 0 0 9600 0110 1100
11562 # number of lines to print data on (printer) (56*)
11564 # number of lines on a sheet of paper (printer) (66*)
11566 # left margin (printer) (0*)
11568 # number of pad chars on new line to printer (0*)
11570 # printer baud rate (9600*)
11572 # printer parity: 00=odd,01=even*,10=space,11=mark
11573 # printer stop bits: 2*/1
11574 # print/do not print guarded areas*
11576 # new line is: 01=LF,10=CR,11=CRLF*
11580 # D menu: 0110 1001 1 0
11581 # LF is newline/LF is down one line, same column*
11582 # wrap to preceding line if move left from col 1*/don't wrap
11583 # wrap to next line if move right from col 80*/don't wrap
11584 # backspace is/is not destructive*
11586 # display*/ignore DEL character
11587 # display will not/will scroll*
11588 # page/column tab stops*
11589 # erase everything*/erase unprotected only
11591 # editing extent: 0=display,1=line*,2=field,3=area
11596 annarbor4080|aa4080|ann arbor 4080,
11599 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11600 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11601 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11602 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11604 # Strange Ann Arbor terminal from BRL
11605 aas1901|Ann Arbor K4080 w/S1901 mod,
11608 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11609 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11612 # If you're using the GNU termcap library, add
11613 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11614 # to these capabilities. This is the nonstandard GNU termcap scrolling
11615 # capability, arguments are:
11616 # 1. Total number of lines on the screen.
11617 # 2. Number of lines above desired scroll region.
11618 # 3. Number of lines below (outside of) desired scroll region.
11619 # 4. Total number of lines on the screen, the same as the first parameter.
11620 # The generic Ann Arbor entry is the only one that uses this.
11621 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11622 OTbs, am, km, mc5i, mir, xon,
11624 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11625 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11626 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11627 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11628 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11629 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11630 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11631 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11632 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11633 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11634 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11635 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11636 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11637 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11638 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11639 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11640 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11641 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11642 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11643 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11644 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
11646 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11647 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11648 vpa=\E[%p1%{1}%+%dd,
11650 aaa+rv|ann arbor ambassador in reverse video,
11651 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11652 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11653 rs1=\E[H\E[7m\E[J$<156>,
11654 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11655 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11656 # Ambassador with the DEC option, for partial vt100 compatibility.
11657 aaa+dec|ann arbor ambassador in dec vt100 mode,
11658 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11659 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11660 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11662 aaa-18|ann arbor ambassador/18 lines,
11664 is2=\E7\E[60;0;0;18p\E8,
11665 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11667 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11668 use=aaa+rv, use=aaa-18,
11669 aaa-20|ann arbor ambassador/20 lines,
11671 is2=\E7\E[60;0;0;20p\E8,
11672 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11674 aaa-22|ann arbor ambassador/22 lines,
11676 is2=\E7\E[60;0;0;22p\E8,
11677 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11679 aaa-24|ann arbor ambassador/24 lines,
11681 is2=\E7\E[60;0;0;24p\E8,
11682 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11684 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11685 use=aaa+rv, use=aaa-24,
11686 aaa-26|ann arbor ambassador/26 lines,
11688 is2=\E7\E[60;0;0;26p\E8,
11689 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11690 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11691 aaa-28|ann arbor ambassador/28 lines,
11693 is2=\E7\E[60;0;0;28p\E8,
11694 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11695 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11696 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11699 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11700 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11701 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11702 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11703 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11704 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11705 use=aaa+rv, use=aaa-30-s,
11706 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11707 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11708 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11709 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11710 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11711 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11712 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11714 is2=\E7\E[60;0;0;30p\E8,
11715 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11716 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11717 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11718 use=aaa+rv, use=aaa-30,
11719 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11720 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11722 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11723 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11724 use=aaa+rv, use=aaa-30,
11725 aaa-36|ann arbor ambassador/36 lines,
11727 is2=\E7\E[60;0;0;36p\E8,
11728 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11729 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11730 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11731 use=aaa+rv, use=aaa-36,
11732 aaa-40|ann arbor ambassador/40 lines,
11734 is2=\E7\E[60;0;0;40p\E8,
11735 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11736 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11737 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11738 use=aaa+rv, use=aaa-40,
11739 aaa-48|ann arbor ambassador/48 lines,
11741 is2=\E7\E[60;0;0;48p\E8,
11742 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11743 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11744 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11745 use=aaa+rv, use=aaa-48,
11746 aaa-60-s|ann arbor ambassador/59 lines+status,
11749 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11750 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11751 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11752 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11753 use=aaa+rv, use=aaa-60-s,
11754 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11755 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11756 aaa-60|ann arbor ambassador/60 lines,
11758 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11760 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11761 use=aaa+rv, use=aaa-60,
11762 aaa-db|ann arbor ambassador 30/destructive backspace,
11764 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11766 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11768 flash=\E[>59h$<100>\E[>59l,
11769 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11770 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11771 guru+rv|guru changes for reverse video,
11772 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11773 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11774 use=guru+rv, use=guru-33,
11775 guru+s|guru status line,
11777 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11778 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11779 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11780 guru-nctxt|guru with no saved context,
11781 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11782 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11784 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11785 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11786 guru-24|ann arbor guru 24 lines,
11788 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11790 guru-44|ann arbor guru 44 lines,
11792 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11794 guru-44-s|ann arbor guru/44 lines+status,
11796 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11797 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11798 guru-76|guru with 76 lines by 89 cols,
11800 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11802 guru-76-s|ann arbor guru/76 lines+status,
11804 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11805 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11806 guru-76-lp|guru-lp|guru with page bigger than line printer,
11807 cols#134, lines#76,
11808 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11810 guru-76-w|guru 76 lines by 178 cols,
11811 cols#178, lines#76,
11812 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11814 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11815 cols#178, lines#75,
11816 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11817 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11818 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11819 cols#178, lines#76,
11820 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11822 aaa-rv-unk|ann arbor unknown type,
11823 lh#0, lw#0, nlab#0,
11824 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11825 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11827 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11828 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11830 #### Applied Digital Data Systems (adds)
11832 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11833 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11834 # terminals was merged again. Then AT&T sold the terminal business to
11835 # SunRiver, which later changed its name to Boundless Technologies. The
11836 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11837 # as of early 1995) are at:
11839 # Boundless Technologies
11840 # 100 Marcus Boulevard
11841 # Hauppauge, NY 11788-3762
11842 # Vox: (800)-231-5445
11843 # Fax: (516)-342-7378
11844 # Web: http://boundless.com
11846 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11847 # In 1995 Boundless acquired DEC's terminals business.
11850 # Regent: lowest common denominator, works on all regents.
11851 # (regent: renamed ":bc:" to ":le:" -- esr)
11852 regent|Adds Regent Series,
11855 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11856 home=\EY\s\s, ind=^J, ll=^A,
11857 # Regent 100 has a bug where if computer sends escape when user is holding
11858 # down shift key it gets confused, so we avoid escape.
11859 regent100|Adds Regent 100,
11862 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11863 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11864 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11865 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11866 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11867 regent20|Adds Regent 20,
11868 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11870 regent25|Adds Regent 25,
11871 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11873 regent40|Adds Regent 40,
11875 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11876 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11877 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11878 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11879 smul=\E0`, use=regent25,
11880 regent40+|Adds Regent 40+,
11881 is2=\EB, use=regent40,
11882 regent60|regent200|Adds Regent 60,
11883 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11884 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11886 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11887 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11888 viewpoint|addsviewpoint|adds viewpoint,
11891 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11892 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11893 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11894 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11895 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11896 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11897 # Some viewpoints have bad ROMs that foo up on ^O
11898 screwpoint|adds viewpoint with ^O bug,
11899 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11901 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11902 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11903 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11904 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11905 # invis=01000100 and %c is the logical or of desired attributes.
11906 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11908 # Update by TD - 2004:
11910 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11912 # COMMANDS ASCII CODE
11914 # Address, Absolute ESC,=,row,column
11916 # Aux Port Enable ESC,@
11917 # Aux Port Disable ESC,A
11921 # Cursor forward FF
11924 # Cursor supress ETB
11925 # Cursor enable CAN
11926 # Erase to end of line ESC,T
11927 # Erase to end of page ESC,Y
11930 # Keyboard unlock SO
11931 # Read current cursor position ESC,?
11932 # Set Attribute ESC,0,x (see below for values of x)
11933 # Tag bit reset ESC,(
11934 # Tag bit set ESC,)
11935 # Transparent Print on ESC,3
11936 # Transparent Print off ESC,4
11942 # Half Intensity A 0101
11944 # Half Intensity Blinking C 0103
11945 # Reverse Video P 0120
11946 # Reverse Video Half Intensity Q 0121
11947 # Reverse Video Blinking R 0122
11948 # Reverse Video Half Intensity
11950 # Underlined ` 0140
11951 # Underlined Half Intensity a 0141
11952 # Underlined Blinking b 0142
11953 # Underlined Half Intensity
11955 # Video suppress D 0104
11956 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11958 cols#80, it#8, lines#24,
11959 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11960 cub1=^H, cud1=^J, cuf1=^L,
11961 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
11962 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
11963 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11964 nel=^M^J, rev=\E0P\E), rmso=\E(,
11965 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
11966 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
11967 vp60|viewpoint60|addsvp60|adds viewpoint60,
11970 # adds viewpoint 90 - from cornell
11971 # Note: emacs sends ei occasionally to insure the terminal is out of
11972 # insert mode. This unfortunately puts the viewpoint90 IN insert
11973 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
11974 # - :ei=:im=: must be present in the termcap translation.)
11975 # - <xhp> indicates glitch that attributes stick to location
11976 # - <msgr> means it's safe to move in standout mode
11977 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
11979 # Function key and label capabilities merged in from SCO.
11980 vp90|viewpoint90|adds viewpoint 90,
11981 OTbs, bw, msgr, xhp,
11983 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
11984 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
11985 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
11986 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
11987 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
11988 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11989 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
11990 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
11991 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
11992 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
11993 # Note: if return acts weird on a980, check internal switch #2
11994 # on the top chip on the CONTROL pc board.
11995 adds980|a980|adds consul 980,
11998 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
11999 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12000 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12001 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12002 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12004 #### C. Itoh Electronics
12006 # As of 1995 these people no longer make terminals (they're still in the
12007 # printer business). Their terminals were all clones of the DEC VT series.
12008 # They're located in Orange County, CA.
12011 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12012 # the delay times and do an auto tab set rather than the indirect
12013 # file used in vt100.
12014 cit80|cit-80|citoh 80,
12017 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12018 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12019 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12020 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12021 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12022 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12023 cit101|citc|C.itoh fast vt100,
12026 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12027 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12028 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12029 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12030 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12031 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12032 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12033 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12035 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12036 # The following termcap entry was created from the Callan cd100 entry. The
12037 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12038 # full selection of combinations of reverse video, underline, and blink.
12039 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12040 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12041 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12042 cit101e|C. Itoh CIT-101e,
12043 OTbs, OTpt, am, mir, msgr,
12044 cols#80, it#8, lines#24,
12045 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12046 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12047 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12048 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12049 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12050 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12051 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12052 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12053 smkx=\E=, smso=\E[7m, smul=\E[4m,
12054 # From: David S. Lawyer, June 1997:
12055 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12056 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12057 # late 1980's CIT Terminals went out of business.
12058 # There is no need to use the initialization string is=... (by invoking
12059 # tset or setterm etc.) provided that the terminal has been manually set
12060 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12061 # compatible it should be in ANSI mode (not VT52). A set-up that
12062 # works is to set all the manually setable stuff to factory defaults
12063 # by pressing ^D in set-up mode. Then increse the brighness with the
12064 # up-arrow key since the factory default will likely be dim on an old
12065 # terminal. Then change any options you want (provided that they are
12066 # compatible with the termcap). For my terminal I set: Screen
12067 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12068 # on. I also set up mine for parity (but you may not need it). Then
12069 # save the setup with ^S.
12070 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12071 cit101e-rv|Citoh CIT-101e (sets reverse video),
12072 am, eo, mir, msgr, xenl, xon,
12073 cols#80, it#8, lines#24,
12074 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12075 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12076 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12077 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12078 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12079 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12080 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12081 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12082 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12083 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12084 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12085 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12086 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12087 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12088 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12089 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12090 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12091 cit101e-n|CIT-101e w/o am,
12093 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12095 cit101e-132|CIT-101e with 132 cols,
12097 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12098 cit101e-n132|CIT-101e with 132 cols w/o am,
12101 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12103 # CIE Terminals CIT-500 from BRL
12104 # The following SET-UP modes are assumed for normal operation:
12105 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12106 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12107 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12108 # Other SET-UP modes may be set for operator convenience or communication
12110 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12111 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12112 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12113 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12114 cit500|CIE Terminals CIT-500,
12115 OTbs, OTpt, mir, msgr, xon,
12116 OTkn#10, cols#80, it#8, lines#64, vt#3,
12117 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12118 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12119 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12120 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12121 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12122 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12123 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12124 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12125 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12126 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12127 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12128 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12129 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12130 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12131 rmso=\E[m, rmul=\E[m,
12132 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12133 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12134 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12136 # C. Itoh printers begin here
12137 citoh|ci8510|8510|c.itoh 8510a,
12140 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12141 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12143 citoh-pica|citoh in pica,
12144 is1=\EN, use=citoh,
12145 citoh-elite|citoh in elite,
12148 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12150 citoh-comp|citoh in compressed,
12153 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12155 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12156 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12158 is1=\EP, use=citoh,
12159 citoh-6lpi|citoh in 6 lines per inch mode,
12160 is3=\EA, use=citoh,
12161 citoh-8lpi|citoh in 8 lines per inch mode,
12163 is3=\EB, use=citoh,
12165 #### Control Data (cdc)
12168 cdc456|cdc 456 terminal,
12171 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12172 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
12173 el=^V, home=^Y, il1=\EL, ind=^J,
12175 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
12179 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12180 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12181 kcuu1=^W, khome=^Y,
12182 cdc721ll|CDC Vikingll,
12184 cols#132, lines#24,
12185 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12186 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12187 kcuu1=^W, khome=^Y,
12188 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
12192 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12193 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
12194 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
12196 # The following switch/key settings are assumed for normal operation:
12197 # 96 chars SCROLL FULL duplex not BLOCK
12198 # Other switches may be set according to communication requirements.
12199 # Insert/delete-character cannot be used, as the whole display is affected.
12200 # "so" & "se" are commented out until jove handles "sg" correctly.
12203 OTkn#10, cols#80, lines#24,
12204 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12205 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
12206 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
12207 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
12208 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
12209 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
12210 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
12211 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
12212 rs1=\031\030\002\003\017,
12214 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
12216 # Part of the long initialization string defines the "DOWN" key to the left
12217 # of the tab key to send an ESC. The real ESC key is positioned way out
12220 # The termcap won't work in 132 column mode due to the way it it moves the
12221 # cursor. Termcap doesn't have the capability (as far as I could tell) to
12222 # handle the 721 in 132 column mode.
12224 # (cdc721: changed :ri: to :sr: -- esr)
12225 cdc721-esc|Control Data 721,
12226 OTbs, OTpt, am, bw, msgr, xon,
12227 OTkn#10, cols#80, it#8, lines#30,
12228 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
12229 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
12230 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
12231 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
12232 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
12233 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
12234 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
12235 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
12236 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
12237 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
12238 smso=^^D, smul=^\, tbc=^^^RY,
12242 # Getronics is a Dutch electronics company that at one time was called
12243 # `Geveke' and made async terminals; but (according to the company itself!)
12244 # they've lost all their documentation on the command set. The hardware
12245 # documentation suggests the terminals were actually manufactured by a
12246 # Taiwanese electronics company named Cal-Comp. There are known
12247 # to have been at least two models, the 33 and the 50.
12250 # The 50 seems to be a top end vt220 clone, with the addition of a higher
12251 # screen resolution, a larger screen, at least 1 page of memory above and
12252 # below the screen, apparently pages of memory right and left of the screen
12253 # which can be panned, and about 75 function keys (15 function keys x normal,
12254 # shift, control, func A, func B). It also has more setup possibilities than
12255 # the vt220. The monitor case is dated November 1978 and the keyboard case is
12258 # The vt100 emulation works as is. The entry below describes the rather
12259 # non-conformant (but more featureful) ANSI mode.
12261 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
12262 visa50|geveke visa 50 terminal in ansi 80 character mode,
12265 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
12266 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
12267 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12268 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12269 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12270 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
12271 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
12272 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12273 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
12274 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
12275 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
12276 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
12277 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
12278 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
12279 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
12280 lf3=A insert line, lf4=A delete line, lf5=A clear,
12281 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
12282 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
12283 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
12284 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
12285 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
12288 #### Human Designed Systems (Concept)
12290 # Human Designed Systems
12292 # King of Prussia, PA 19406
12293 # Vox: (610)-277-8300
12294 # Fax: (610)-275-5739
12295 # Net: support@hds.com
12297 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
12298 # the character-terminal business now (1995) and making X terminals. In
12299 # particular, the whole `Concept' line described here was discontinued long
12303 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
12304 # Extensive changes to c108 by arpavax:eric Feb 1982
12305 # Some unknown person at SCO then translated it to terminfo.
12307 # There seem to be a number of different versions of the C108 PROMS
12308 # (with bug fixes in its Z-80 program).
12310 # The first one that we had would lock out the keyboard of you
12311 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
12312 # Try that on your C108 and see if it sends a ^S when you type it.
12313 # If so, you have an old version of the PROMs.
12315 # You should configure the C108 to send ^S/^Q before running this.
12316 # It is much faster (at 9600 baud) than the c100 because the delays
12318 # new status line display entries for c108-8p:
12319 # <is3> - init str #3 - setup term for status display -
12320 # set programmer mode, select window 2, define window at last
12321 # line of memory, set bkgnd stat mesg there, select window 0.
12323 # <tsl> - to status line - select window 2, home cursor, erase to
12324 # end-of-window, 1/2 bright on, goto(line#0, col#?)
12326 # <fsl> - from status line - 1/2 bright off, select window 0
12328 # <dsl> - disable status display - set bkgnd status mesg with
12331 # There are probably more function keys that should be added but
12332 # I don't know what they are.
12334 # No delays needed on c108 because of ^S/^Q handshaking
12336 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
12337 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
12338 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
12339 c108-4p|concept108-4p|concept 108 w/4 pages,
12340 OTbs, eslok, hs, xon,
12342 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
12343 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
12344 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
12345 ind=^J, is1=\EK\E!\E F,
12346 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
12347 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
12348 smcup=\EU\Ev 8p\Ep\r\E\025,
12349 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
12350 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
12351 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
12353 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
12354 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
12356 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
12358 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
12359 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
12362 # These have only window relative cursor addressing, not screen
12363 # relative. To get it to work right here, smcup/rmcup (which
12364 # were invented for the concept) lock you into a one page
12365 # window for screen style programs.
12367 # To get out of the one page window, we use a clever trick:
12368 # we set the window size to zero ("\Ev " in rmcup) which the
12369 # terminal recognizes as an error and resets the window to all
12372 # This trick works on c100 but does not on c108, sigh.
12374 # Some tty drivers use cr3 for concept, others use nl3, hence
12375 # the delays on cr and ind below. This padding is only needed at
12376 # 9600 baud and up. One or the other is commented out depending on
12377 # local conventions.
12379 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
12380 # less than 6 but more than 2 will work.
12382 # Note: can't use function keys f7-f10 because they are
12383 # indistinguishable from arrow keys (!), also, del char and
12384 # clear eol use xon/xoff so they probably won't work very well.
12386 # Also note that we don't define insrt/del char/delline/eop/send
12387 # because they don't transmit unless we reset them - I figured
12388 # it was a bad idea to clobber their definitions.
12390 # The <mc5> sequence changes the escape character to ^^ so that
12391 # escapes will be passed through to the printer. Only trouble
12392 # is that ^^ won't be - ^^ was chosen to be unlikely.
12393 # Unfortunately, if you're sending raster bits through to be
12394 # plotted, any character you choose will be likely, so we lose.
12396 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
12397 # cannot be # in is2 because it will hang a c100 with no printer
12399 c100|concept100|concept|c104|c100-4p|hds concept 100,
12400 OTbs, am, eo, mir, ul, xenl,
12401 cols#80, lines#24, pb#9600, vt#8,
12402 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
12403 cub1=^H, cud1=^J, cuf1=\E=,
12404 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
12405 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
12406 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
12407 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
12409 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
12410 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
12411 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
12412 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
12413 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
12414 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
12415 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
12416 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
12417 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
12418 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
12419 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
12420 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
12421 smso=\ED, smul=\EG,
12422 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
12423 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
12424 smso=\EE, use=c100,
12425 oc100|oconcept|c100-1p|old 1 page concept 100,
12429 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
12430 # Lots of notes, originally inline, but ncurses doesn't grok that.
12432 # am: not available in power on mode, but turned on with \E[=107;207h in
12433 # is2=. Also, \E=124l in is2= could have been used to prevent needing
12434 # to specify xenl:, but that would have rendered the last space on the
12435 # last line useless.
12436 # bw: Not available in power on mode, but turned on with \E[=107;207h in
12438 # clear: Could be done with \E[2J alone, except that vi (and probably most
12439 # other programs) assume that this also homes the cursor.
12440 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12441 # scroll the window, and go back to window 1.
12442 # is2: the string may cause a warning to be issued by tic that it
12443 # found a very long line and that it suspects that a comma is missing
12444 # somewhere. This warning can be ignored (unless it comes up more than
12445 # once). The initialization string contains the following commands:
12447 # [Setup mode items changed from factory defaults:]
12448 # \E)0 set alternate character set to
12450 # ^O set character set to default
12451 # [In case it wasn't]
12452 # \E[m turn off all attributes
12453 # [In case they weren't off]
12454 # \E[=107; cursor wrap and
12455 # 207h character wrap on
12456 # \E[90;3u set Fkey definitions to "transmit"
12458 # \E[92;3u set cursor key definitions to
12459 # "transmit" defaults
12460 # \E[43;1u set shift F13 to transmit...
12462 # \E[44;1u set shift F14 to transmit...
12464 # \E[45;1u set shift F15 to transmit...
12466 # \E[46;1u set shift F16 to transmit...
12468 # \E[200;1u set shift up to transmit...
12470 # \E[201;1u set shift down to transmit...
12472 # \E[202;1u set shift right to transmit...
12474 # \E[203;1u set shift left to transmit...
12476 # \E[204;1u set shift home to transmit...
12478 # \E[212;1u set backtab to transmit...
12480 # \E[213;1u set shift backspace to transmit...
12482 # \E[214;1u set shift del to transmit...
12484 # [Necessary items not mentioned in setup mode:]
12485 # \E[2!w move to window 2
12486 # \E[25;25w define window as line 25 of memory
12487 # \E[!w move to window 1
12488 # \E[2*w show current line of window 2 as
12490 # \E[2+x set meta key to use high bit
12491 # \E[;3+} move underline to bottom of character
12493 # All Fkeys are set to their default transmit definitions with \E[90;3u
12494 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12495 # setting MUST be redefined or deactivated, because the default is
12496 # contained in almost all of this terminal's Fkey strings! If for some
12497 # reason "quit" cannot be altered, the Fkeys can, but it would be
12498 # necessary to change ^| to ^] in all of these definitions, and add
12499 # \E[2;029!t to is2.
12500 # lines: is set to 24 because this terminal refuses to treat the 25th
12502 # ll: Not available in power on mode, but turned on with \E[=107;207h in
12504 # lm: Pointless, given that this definition locks a single screen of
12505 # memory into view, but what the hey...
12506 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12507 # other attributes alone), but some programs expect this to turn off
12509 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12510 # attributes alone), but some programs expect this to turn off
12512 # sgr: Attributes are set on this terminal with the string \E[ followed by
12513 # a list of attribute code numbers (in decimal, separated by
12514 # semicolons), followed by the character m. The attribute code
12517 # 2 for dim (which is ignored in power on mode);
12521 # 8 for not displayable; and
12522 # =99 for protected (except that there are strange side
12523 # effects to protected characters which make them inadvisable).
12524 # The mapping of terminfo parameters to attributes is as follows:
12525 # %p1 (standout) = bold and inverse together;
12526 # %p2 (underline) = underline;
12527 # %p3 (reverse) = inverse;
12528 # %p4 (blink) = blinking;
12529 # %p5 (dim) is ignored;
12530 # %p6 (bold) = bold;
12531 # %p7 (invisible) = not displayable;
12532 # %p8 (protected) is ignored; and
12533 # %p9 (alt char set) = alt char set.
12534 # The code to do this is:
12536 # %?%p1%p6%O IF (standout; bold) OR
12537 # %t;1 THEN OUTPUT ;1
12539 # %?%p2 IF underline
12540 # %t;4 THEN OUTPUT ;4
12543 # %t;5 THEN OUTPUT ;5
12545 # %?%p1%p3%O IF (standout; reverse) OR
12546 # %t;7 THEN OUTPUT ;7
12548 # %?%p7 IF invisible
12549 # %t;8 THEN OUTPUT ;8
12552 # %?%p9 IF altcharset
12553 # %t^N THEN OUTPUT ^N
12554 # %e^O ELSE OUTPUT ^O
12556 # sgr0: Everything is turned off (including alternate character set), since
12557 # there is no way of knowing what it is that the program wants turned
12559 # smul: The "underline" attribute is reconfigurable to an overline or
12560 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
12561 # bottom of the character cell. This was done to allow for more readable
12562 # underlined characters, and to be able to distinguish between an
12563 # underlined space, an underscore, and an underlined underscore.
12564 # xenl: Terminal can be configured to not need this, but this "glitch"
12565 # behavior is actually preferable with autowrap terminals.
12567 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
12568 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
12569 # string modifies the 'O' in kf43 to kf46 to a '$'.
12571 # kcbt was originally ^I but redefined in is2=.
12572 # kHOM was \E[H originally but redefined in is2=, as were a number of
12574 # kDC was originally \177 but redefined in is2=.
12576 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
12577 # tsl: Go to window 2, then do an hpa=.
12579 #------- flash=\E[8;3!}^G\E[3;3!}
12580 #------- flash=\E[?5h$<100>\E[?5l
12581 # There are two ways to flash the screen, both of which have their drawbacks.
12582 # The first is to set the bell mode to video, transmit a bell character, and
12583 # set the bell mode back - but to what? There is no way of knowing what the
12584 # user's old bell setting was before we messed with it. Worse, the command to
12585 # set the bell mode also sets the key click volume, and there is no way to say
12586 # "leave that alone", or to know what it's set to, either.
12587 # The second way to do a flash is to set the screen to inverse video, pad for a
12588 # tenth of a second, and set it back - but like before, there's no way to know
12589 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12590 # it that way. The point is moot anyway, since vi (and probably other
12591 # programs) assume that by defining flash=, you want the computer to use it
12592 # INSTEAD of bel=, rather than as a secondary type of signal.
12594 #------- cvvis=\E[+{
12595 # The is the power on setting, which is also as visible as the cursor
12597 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12598 # Windowing is possible, but not defined here because it is also used to
12599 # emulate status line functions. Allowing a program to set a window could
12600 # clobber the status line or render it unusable. There is additional memory,
12601 # but screen scroll functions are destructive and do not make use of it.
12603 #------- dim= Not available in power on mode.
12604 # You have a choice of defining low intensity characters as "half bright" and
12605 # high intensity as "normal", or defining low as "normal" and high as "bold".
12606 # No matter which you choose, only one of either "half bright" or "bold" is
12607 # available at any time, so taking the time to override the default is
12610 #------- prot=\E[=0;99m
12611 # Not defined, because it appears to have some strange side effects.
12612 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12613 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12614 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12615 # Available, but making them available to programs is inadvisable.
12616 # The code to do this is:
12617 # %?%p1%{24}%< IF ((key; 24) <;
12618 # %p1%{30}%> ((key; 30) >;
12619 # %p1%{54}%< (key; 54) <
12622 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12623 # %t\E[ THEN OUTPUT \E[
12624 # %p1%d OUTPUT (key) as decimal
12625 # [next line applies to pfx only]
12629 # %p2%s OUTPUT (string) as string
12631 # [DEL chosen as delimiter, but could be any character]
12632 # [implied: ELSE do nothing]
12636 # Not defined since anything it might do could be done faster and easier with
12637 # either Meta-Shift-Reset or the main power switch.
12639 #------- smkx=\E[1!z
12640 #------- rmkx=\E[!z
12641 # These sequences apply to the cursor and setup keys only, not to the
12642 # numeric keypad. But it doesn't matter anyway, since making these
12643 # available to programs is inadvisable.
12644 # For the key definitions below, all sequences beginning with \E$ are
12645 # custom and programmed into the terminal via is2. \E$ also has no
12646 # meaning to any other terminal.
12648 #------- cmdch=\E[;%p1%d!t
12649 # Available, but making it available to programs is inadvisable.
12650 #------- smxon=\E[1*q
12651 # Available, but making it available to programs is inadvisable.
12652 # Terminal will send XON/XOFF on buffer overflow.
12653 #------- rmxon=\E[*q
12654 # Available, but making it available to programs is inadvisable.
12655 # Terminal will not notify on buffer overflow.
12656 #------- smm=\E[2+x
12658 # Available, but making them available to programs is inadvisable.
12661 # It's not made clear in the manuals, but based on other ansi/vt type
12662 # terminals, it's a good guess that this terminal is capable of both
12663 # "transparent print" (which doesn't copy data to the screen, and
12664 # therefore needs mc5i: specified to say so) and "auxilliary print"
12665 # (which does duplicate printed data on the screen, in which case mc4=
12666 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12668 hds200|Human Designed Systems HDS200,
12669 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
12670 cols#80, it#8, lines#24, lm#0,
12671 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12672 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12673 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12674 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12675 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12676 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12677 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12678 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12679 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12680 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12682 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12683 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12684 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12685 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12686 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12687 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12688 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12689 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12690 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12691 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12692 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12693 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12694 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12695 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12696 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12697 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12698 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
12699 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
12700 rmul=\E[m\017, sc=\E7,
12701 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12702 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12703 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12706 # <ht> through <el> included to specify padding needed in raw mode.
12707 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12708 avt-ns|concept avt no status line,
12709 OTbs, am, eo, mir, ul, xenl, xon,
12710 cols#80, it#8, lines#24, lm#192,
12711 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12712 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12713 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12714 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12715 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12716 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12717 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12718 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12719 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12720 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12721 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12722 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12723 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12724 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12725 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12726 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12727 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12728 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12729 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12731 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
12732 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
12733 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
12734 tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12735 avt-rv-ns|concept avt in reverse video mode/no status line,
12736 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12738 avt-w-ns|concept avt in 132 column mode/no status line,
12739 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12741 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12742 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12743 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12745 # Concept AVT with status line. We get the status line using the
12746 # "Background status line" feature of the terminal. We swipe the
12747 # first line of memory in window 2 for the status line, keeping
12748 # 191 lines of memory and 24 screen lines for regular use.
12749 # The first line is used instead of the last so that this works
12750 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12751 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12753 avt+s|concept avt status line changes,
12756 dsl=\E[0*w, fsl=\E[1;1!w,
12757 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12758 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12759 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12760 avt|avt-s|concept-avt|avt w/80 columns,
12761 use=avt+s, use=avt-ns,
12762 avt-rv|avt-rv-s|avt reverse video w/sl,
12763 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12764 use=avt+s, use=avt-ns,
12765 avt-w|avt-w-s|concept avt 132 cols+status,
12766 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12767 use=avt+s, use=avt-ns,
12768 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12769 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12770 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12772 #### Contel Business Systems.
12775 # Contel c300 and c320 terminals.
12776 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12778 cols#80, lines#24, xmc#1,
12779 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12780 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12781 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12782 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12783 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12784 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12785 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12786 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12787 # Contel c301 and c321 terminals.
12788 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12789 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12792 #### Data General (dg)
12794 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12795 # the terminals group at Data General was shut down in 1991; all these
12796 # terminals have thus been discontinued.
12798 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12799 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12800 # sequentially, first the unmodified key codes are listed as F1 through F15.
12801 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12802 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12803 # F46 through F60. This is done in the private "includes" below whose names
12804 # start with "dgkeys+".
12806 # DG terminals generally support 8 bit characters. For each of these terminals
12807 # two descriptions are supplied:
12808 # 1) A default description for 8 bits/character communications, which
12809 # uses the default DG international character set and keyboard codes.
12810 # 2) A description with suffix "-7b" for 7 bits/character communications.
12811 # This description must use the NON-DEFAULT native keyboard language.
12813 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12814 # Ctrl/Shift fdkeys (kf34-kf44).
12816 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12817 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12818 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12819 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12820 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12821 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12822 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12823 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12824 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12825 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12826 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12827 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12828 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12829 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12830 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12831 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12832 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12833 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12834 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12835 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12836 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12837 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12838 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12839 khome=\233H, kprt=\233i,
12841 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12842 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12843 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12844 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12845 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12846 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12847 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12848 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12849 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12850 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12851 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12852 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12853 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12854 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12855 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12856 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12857 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12858 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12859 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12861 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12862 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12863 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12864 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12865 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12866 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12867 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12868 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12869 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12870 kf8=^^x, kf9=^^y, khome=^H,
12872 dgkeys+15|Private entry describing 15 DG mode special keys,
12873 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12874 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12875 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12876 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12877 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12878 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12879 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12880 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12881 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12882 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12883 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12886 # Data General color terminals use the "Tektronix" color model. The total
12887 # number of colors varies with the terminal model, as does support for
12888 # attributes used in conjunction with color.
12890 # Removed u7, u8 definitions since they conflict with tack:
12891 # Preserve user-defined colors in at least some cases.
12893 # Default is ACM mode.
12894 # u8=^^F}20^^Fi^^F}21,
12896 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12898 colors#16, ncv#53, pairs#256,
12900 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12901 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12902 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12904 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12907 # Video attributes are coordinated using static variables set by "sgr", then
12908 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12909 # (D=dim, U=underline, B=blink, R=reverse.)
12910 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12912 colors#8, ncv#16, pairs#64,
12913 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12914 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12915 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12916 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12917 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12919 dg+color|Color info for Data General D470C terminals in ANSI mode,
12920 colors#16, ncv#53, pairs#256,
12921 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12922 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12923 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12924 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12927 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12929 colors#8, ncv#16, pairs#64,
12931 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12932 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12933 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12935 dgmode+color|Color info for Data General D470C terminals in DG mode,
12936 colors#16, pairs#256,
12937 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12938 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12941 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12943 colors#52, ncv#53, pairs#26,
12944 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
12945 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12946 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12947 scp=\036RG2%p1%02X,
12949 # Colors are in the order: normal, reverse, dim, dim + reverse.
12950 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12952 colors#52, ncv#53, pairs#26,
12953 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12954 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12955 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12956 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12958 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12959 # Initialization string 1 sets:
12960 # ^R - vertical scrolling enabled
12961 # ^C - blinking enabled
12962 dg-generic|Generic Data General terminal in DG mode,
12965 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12966 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
12967 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
12968 smul=^T, use=dgkeys+11,
12970 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
12971 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
12972 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
12973 # maybe they were originally nuls (which would fit).
12975 dg200|data general dasher 200,
12978 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12979 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
12980 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
12981 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
12982 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
12985 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
12986 dg210|dg-ansi|Data General 210/211,
12989 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
12990 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12991 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12992 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
12993 smso=\E[7;m, smul=\E[4;m,
12994 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
12995 # courtesy of Carlos Rucalde of Vantage Software, Inc.
12996 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
12997 # I suspect the d200 function keys actually work on the dg211, check it out.)
12998 dg211|Data General d211,
12999 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13000 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13001 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13003 # dg450 from Cornell (not official)
13004 dg450|dg6134|data general 6134,
13005 cub1@, cuf1=^X, use=dg200,
13008 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13009 # having a command to move straight down from any position on the bottom line
13010 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13011 # above have both, the D210/211, for instance, has neither. We must use ANSI
13012 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13013 # backspace on all terminals. This is not so in DG mode.
13014 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13015 # grounds that there is no matching ":ml:"
13016 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13017 OTbs, am, msgr, ul,
13018 cols#80, it#8, lines#24,
13019 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13020 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13021 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13022 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13023 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13024 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13025 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13026 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13027 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13028 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13029 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13030 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13031 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13032 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13033 # Data General 605x
13034 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13035 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13036 # This also matches a posted description of something called a `Dasher 100'
13037 # so there's a dg100 alias here.
13038 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13039 dg6053-old|dg100|data general 6053,
13042 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13043 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13044 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13045 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13046 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13047 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13050 # (Some performance can be gained over the generic DG terminal type)
13051 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13053 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13055 # Like 6053, but adds reverse video and more keypad and function keys.
13056 d200|d200-dg|Data General DASHER D200,
13057 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13058 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13059 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13062 # DASHER D210 series terminals in ANSI mode.
13063 # Reverse video, no insert/delete character/line, 7 bits/character only.
13065 # Initialization string 1 sets:
13066 # <0 - scrolling enabled
13067 # <1 - blink enabled
13068 # <4 - print characters regardless of attributes
13069 d210|d214|Data General DASHER D210 series,
13072 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13073 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13074 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13075 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13076 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13077 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13078 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
13079 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13081 # DASHER D210 series terminals in DG mode.
13082 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13083 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13085 ed=^^FF, use=d200-dg,
13087 # DASHER D211 series terminals in ANSI mode.
13088 # Like the D210, but with 8-bit characters and local printer support.
13090 # Initialization string 2 sets:
13092 # 2;1 - 8 bit operations
13093 # 1;1 - 8 bit (international) keyboard language
13094 # \E(B - default primary character set (U.S. ASCII)
13095 # \E)4 - default secondary character set (international)
13096 # ^O - primary character set
13098 d211|d215|Data General DASHER D211 series,
13100 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13103 # Initialization string 2 sets:
13105 # 2;0 - 7 bit operations
13106 # 1;0 - 7 bit (native) keyboard language
13107 # \E(0 - default character set (the keyboard native language)
13108 # ^O - primary character set
13109 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13111 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13113 # Like the D210 series, but adds support for 8-bit characters.
13115 # Reset string 2 sets:
13116 # ^^N - secondary character set
13117 # ^^FS0> - 8 bit international character set
13118 # ^^O - primary character set
13119 # ^^FS00 - default character set (matching the native keyboard language)
13121 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13123 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13125 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13128 # Enhanced DG mode with changes to be more UNIX compatible.
13129 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13132 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13133 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13134 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13135 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13136 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13137 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13138 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13139 rs2=\036N\036FS0E\036O\036FS00,
13140 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13141 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13142 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13143 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13145 is3=\036Fz2, use=d216+,
13147 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13149 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13152 # DASHER D220 color terminal in ANSI mode.
13153 # Like the D470C but with fewer colors and screen editing features.
13155 # Initialization string 1 sets:
13157 # <0 - scrolling enabled
13158 # <1 - blink enabled
13159 # <4 - print characters regardless of attributes
13160 # \E[m - all attributes off
13161 # Reset string 1 sets:
13162 # \Ec - initial mode defaults (RIS)
13164 d220|Data General DASHER D220,
13166 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13167 use=dg+color8, use=d470c,
13169 d220-7b|Data General DASHER D220 in 7 bit mode,
13171 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13172 use=dg+color8, use=d470c-7b,
13174 # Initialization string 3 sets:
13175 # - default cursor (solid rectangle)
13176 # Reset string 2 sets:
13177 # ^^N - secondary character set
13178 # ^^FS0> - 8 bit international character set
13179 # ^^O - primary character set
13180 # ^^FS00 - default character set (matching the native keyboard language)
13182 d220-dg|Data General DASHER D220 color terminal in DG mode,
13184 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
13185 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
13188 # DASHER D230C color terminal in ANSI mode.
13189 # Like the D220 but with minor ANSI compatibility improvements.
13191 d230c|d230|Data General DASHER D230C,
13192 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
13193 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
13194 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13195 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
13196 smul=\E[4;50m, use=dgkeys+7b, use=d220,
13198 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
13201 # DASHER D400/D450 series terminals.
13202 # These add intelligent features like insert/delete to the D200 series.
13204 # Initialization string 2 sets:
13205 # ^^FQ2 - default cursor (solid rectangle)
13206 # ^^FW - character protection disabled
13207 # ^^FJ - normal (80 column) mode
13208 # ^^F\^ - horizontal scrolling enabled (for alignment)
13209 # ^^FX004? - margins at columns 0 and 79
13210 # ^^F] - horizontal scrolling disabled
13211 # ^^O - primary character set
13212 # ^^FS00 - default character set (the keyboard native language)
13213 # - (should reset scrolling regions, but that glitches the screen)
13214 # Reset string 1 sets:
13215 # ^^FA - all terminal defaults except scroll rate
13216 # Reset string 2 sets:
13217 # ^^F] - horizontal scrolling disabled
13218 # ^^FT0 - jump scrolling
13220 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
13222 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
13223 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
13224 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
13225 ich1=^^J, il1=^^FH,
13226 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
13227 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
13228 rs1=^^FA, rs2=\036F]\036FT0,
13229 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
13230 sgr0=\017\025\035\036E\036O, smacs=^^N,
13231 vpa=\020\177%p1%c, use=d210-dg,
13233 # DASHER D410/D460 series terminals in ANSI mode.
13234 # These add a large number of intelligent terminal features.
13236 # Initialization string 1 sets:
13238 # <0 - scrolling enabled
13239 # <1 - blink enabled
13240 # <2 - horizontal scrolling enabled (for alignment)
13241 # <4 - print characters regardless of attributes
13242 # \E[5;0v - normal (80 column) mode
13243 # \E[1;1;80w - margins at columns 1 and 80
13245 # 1 - print all characters even if protected
13246 # 6 - character protection disabled
13247 # <2 - horizontal scrolling disabled
13248 # - (should reset scrolling regions, but that glitches the screen)
13250 # Initialization string 2 sets:
13252 # 3;2 - default cursor (solid rectangle)
13253 # 2;1 - 8 bit operations
13254 # 1;1 - international keyboard language
13255 # \E(B - default primary character set (U.S. ASCII)
13256 # \E)4 - default secondary character set (international)
13257 # ^O - primary character set
13259 # Reset string 1 sets:
13260 # \Ec - initial mode defaults (RIS)
13261 # \E[<2h - horizontal scrolling disabled
13263 # Reset string 2 sets:
13265 # 4;0 - jump scrolling
13266 # 2;1 - 8 bit operations
13267 # 1;1 - 8 bit (international) keyboard language
13268 # \E(B - default primary character set (U.S. ASCII)
13269 # \E)4 - default secondary character set (international)
13271 d410|d411|d460|d461|Data General DASHER D410/D460 series,
13273 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
13274 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13275 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
13276 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
13277 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
13278 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
13279 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
13280 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
13281 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
13283 # Initialization string 2 sets:
13285 # 3;2 - default cursor (solid rectangle)
13286 # 2;0 - 7 bit operations
13287 # 1;0 - 7 bit (native) keyboard language
13288 # \E(0 - default character set (the keyboard native language)
13289 # ^O - primary character set
13291 # Reset string 2 sets:
13293 # 4;0 - jump scrolling
13294 # 2;0 - 7 bit operations
13295 # 1;0 - 7 bit (native) keyboard language
13296 # \E(0 - default character set (the keyboard native language)
13298 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
13300 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
13301 rs2=\E[4;0;2;0;1;0v\E(0,
13302 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
13303 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
13305 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
13307 enacs@, rmacs=\036FS00,
13308 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13309 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
13312 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
13314 # Initialization string 1 sets:
13316 # <0 - scrolling enabled
13317 # <1 - blink enabled
13318 # <2 - horizontal scrolling enabled (for alignment)
13319 # <4 - print characters regardless of attributes
13320 # \E[5;1v - compressed (135 column) mode
13321 # \E[1;1;126 - margins at columns 1 and 126
13323 # 1 - print all characters even if protected
13324 # 6 - character protection disabled
13325 # <2 - horizontal scrolling disabled
13326 # - (should reset scrolling regions, but that glitches the screen)
13328 # Reset string 1 sets:
13329 # \Ec - initial mode defaults (RIS)
13330 # \E[5;1v - compressed (135 column) mode
13331 # \E[1;1;126w - margins at columns 1 and 126
13332 # \E[<2h - horizontal scrolling disabled
13334 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
13336 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13337 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
13339 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
13341 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13342 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
13344 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
13347 # These add intelligent features like scrolling regions.
13348 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
13349 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
13350 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
13351 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
13352 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
13353 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
13354 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
13355 vpa=\036FPFF%p1%2.2X,
13356 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13358 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
13360 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
13361 rs2=\036P@1\036FK\036FX0083,
13362 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
13364 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
13367 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13369 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
13371 clear=\036FG\036PH, fsl=\036F}01\022,
13372 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
13373 tsl=\036F}00\036FP%p1%2.2X18\036PG,
13374 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
13377 # Relative cursor motions are confined to the current window,
13378 # which is not what the scrolling region specification expects.
13379 # Thus, relative vertical cursor positioning must be deleted.
13380 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
13381 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
13382 cud1@, cuu1@, ll@, use=d462+,
13384 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
13386 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
13388 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
13390 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
13392 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
13395 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
13397 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
13399 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
13401 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
13403 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
13406 d430c-dg|d430-dg|Data General D430C in DG mode,
13407 use=d413-dg, use=dg+fixed,
13408 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
13409 use=d413-dg, use=dg+ccc,
13411 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
13412 use=d413-unix, use=dgunix+fixed,
13413 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
13414 use=d413-unix-w, use=dgunix+fixed,
13415 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
13416 use=d413-unix-25, use=dgunix+fixed,
13417 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
13418 use=d413-unix-s, use=dgunix+fixed,
13419 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
13420 use=d413-unix-sr, use=dgunix+fixed,
13421 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
13422 use=d413-unix, use=dgunix+ccc,
13423 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
13424 use=d413-unix-w, use=dgunix+ccc,
13425 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
13426 use=d413-unix-25, use=dgunix+ccc,
13427 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
13428 use=d413-unix-s, use=dgunix+ccc,
13429 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
13430 use=d413-unix-sr, use=dgunix+ccc,
13432 # DASHER D470C color terminal in ANSI mode.
13433 # Like the D460 but with 16 colors and without a compressed mode.
13435 # Initialization string 1 sets:
13437 # <0 - scrolling enabled
13438 # <1 - blink enabled
13439 # <2 - horizontal scrolling enabled (for alignment)
13440 # <4 - print characters regardless of attributes
13441 # \E[1;1;80w - margins at columns 1 and 80
13443 # 1 - print all characters even if protected
13444 # 6 - character protection disabled
13445 # <2 - horizontal scrolling disabled
13446 # - (should reset scrolling regions, but that glitches the screen)
13448 d470c|d470|Data General DASHER D470C,
13449 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13450 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13451 use=dg+color, use=d460,
13453 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
13454 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13455 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
13456 use=dg+color, use=d460-7b,
13458 # Initialization string 2 sets:
13459 # ^^FQ2 - default cursor (solid rectangle)
13460 # ^^FW - character protection disabled
13461 # ^^F\^ - horizontal scrolling enabled (for alignment)
13462 # ^^FX004? - margins at columns 0 and 79
13463 # ^^F] - horizontal scrolling disabled
13464 # ^^O - primary character set
13465 # ^^FS00 - default character set (the keyboard native language)
13466 # - (should reset scrolling regions, but that glitches the screen)
13468 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
13469 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
13470 use=dgmode+color, use=d460-dg,
13472 # DASHER D555 terminal in ANSI mode.
13473 # Like a D411, but has an integrated phone.
13474 d555|Data General DASHER D555,
13476 d555-7b|Data General DASHER D555 in 7-bit mode,
13478 d555-w|Data General DASHER D555 in wide mode,
13480 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
13482 d555-dg|Data General DASHER D555 series in DG mode,
13485 # DASHER D577 terminal in ANSI mode.
13486 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
13487 d577|Data General DASHER D577,
13489 d577-7b|Data General DASHER D577 in 7-bit mode,
13491 d577-w|Data General DASHER D577 in wide mode,
13493 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
13496 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
13499 # DASHER D578 terminal.
13500 # Like a D577, but without compressed mode; like a D470C in this respect.
13502 # Initialization string 1 sets:
13504 # <0 - scrolling enabled
13505 # <1 - blink enabled
13506 # <2 - horizontal scrolling enabled (for alignment)
13507 # <4 - print characters regardless of attributes
13508 # \E[1;1;80w - margins at columns 1 and 80
13510 # 1 - print all characters even if protected
13511 # 6 - character protection disabled
13512 # <2 - horizontal scrolling disabled
13513 # - (should reset scrolling regions, but that glitches the screen)
13515 d578|Data General DASHER D578,
13516 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13517 d578-7b|Data General DASHER D578 in 7-bit mode,
13518 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13520 #### Datamedia (dm)
13522 # Datamedia was headquartered in Nashua, New Hampshire until it went
13523 # out of business in 1993, but the ID plates on the terminals referred
13524 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
13525 # manufacturer which threw out all information about the terminals.
13528 cs10|colorscan|Datamedia Color Scan 10,
13531 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13532 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13533 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13534 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
13535 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13536 cs10-w|Datamedia Color Scan 10 with 132 columns,
13538 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13540 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
13541 dm1520|dm1521|datamedia 1520,
13543 cols#80, it#8, lines#24,
13544 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13545 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13546 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
13548 # dm2500: this terminal has both <ich> and <smir>. Applications using
13549 # termcap/terminfo directly (rather than through ncurses) might be confused.
13550 dm2500|datamedia2500|datamedia 2500,
13553 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
13554 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
13555 dch1=\020\010\030\035$<10*>,
13556 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
13557 ich1=\020\034\030\035$<10*>,
13558 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
13559 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
13560 smdc=^P, smir=^P, smso=^N,
13561 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
13562 # also, has a meta-key.
13563 # From: <goldberger@su-csli.arpa>
13564 # (dmchat: ":MT:" changed to ":km:" -- esr)
13565 dmchat|dmchat version of datamedia 2500,
13567 dl1=\020\032\030\035$<2/>,
13568 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13569 # (dm3025: ":MT:" changed to ":km:" -- esr)
13570 dm3025|datamedia 3025a,
13572 cols#80, it#8, lines#24,
13573 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13574 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
13575 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
13576 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
13577 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
13578 smir=\EP, smso=\EO1,
13579 dm3045|datamedia 3045a,
13580 OTbs, am, eo, km@, ul, xenl,
13581 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
13582 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
13583 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
13584 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13586 # Datamedia DT80 soft switches:
13587 # 1 0=Jump 1=Smooth
13588 # Autorepeat 0=off 1=on
13589 # Screen 0=Dark 1=light
13590 # Cursor 0=u/l 1=block
13592 # 2 Margin Bell 0=off 1=on
13593 # Keyclick 0=off 1=on
13594 # Ansi/VT52 0=VT52 1=Ansi
13595 # Xon/Xoff 0=Off 1=On
13597 # 3 Shift3 0=Hash 1=UK Pound
13599 # Newline 0=Off 1=On
13600 # Interlace 0=Off 1=On
13602 # 4 Parity 0=Odd 1=Even
13603 # Parity 0=Off 1=On
13604 # Bits/Char 0=7 1=8
13605 # Power 0=60Hz 1=50Hz
13607 # 5 Line Interface 0=EIA 1=Loop
13608 # Aux Interface 0=EIA 1=Loop
13609 # Local Copy 0=Off 1=On
13612 # 6 Aux Parity 0=Odd 1=Even
13613 # Aux Parity 0=Off 1=On
13614 # Aux Bits/Char 0=7 1=8
13615 # CRT Saver 0=Off 1=On
13616 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13617 dm80|dmdt80|dt80|datamedia dt80/1,
13618 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13619 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13620 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13621 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13623 # except in 132 column mode, where it needs a little padding.
13624 # This is still less padding than the vt100, and you can always turn on
13625 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13627 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13629 clear=\E[H\E[2J$<50/>, cud1=^J,
13630 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13631 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13632 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13633 dt80-sas|Datamedia DT803/DTX for SAS usage,
13636 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13637 bel=^G, clear=^L, cr=^M,
13638 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13639 cub1=^H, cud1=\EB, cuf1=^\,
13640 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13641 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13642 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13643 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13644 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13645 smso=\E$2\004, tbc=\E'0,
13647 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13648 # These aren't end-all Excel termcaps; but do insert/delete char/line
13649 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13650 # The naming convention has been bent somewhat, with the use of E? (where
13651 # E is for 'Excel') as # a name. This was done to distinguish the entries
13652 # from the other Datamedias in use here, and yet to associate a model of
13653 # the Excel terminals with the regular datamedia terminals that share
13654 # major characteristics.
13655 excel62|excel64|datamedia Excel 62,
13656 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13657 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13659 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13660 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13661 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13663 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13664 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13665 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13666 smir=\E[4h, use=dt80,
13670 # Falco Data Products
13671 # 440 Potrero Avenue
13672 # Sunnyvale, CA 940864-196
13673 # Vox: (800)-325-2648
13674 # Fax: (408)-745-7860
13675 # Net: techsup@charm.sys.falco.com
13677 # Current Falco models as of 1995 are generally ANSI-compatible and support
13678 # emulations of DEC VT-series, Wyse, and Televideo types.
13681 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13682 # This terminal was released around 1983 and was discontinued long ago.
13683 # The standout and underline highlights are the same.
13684 falco|ts1|ts-1|falco ts-1,
13686 cols#80, it#8, lines#24,
13687 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13688 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13689 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13690 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13691 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13692 smir=\Eq, smso=\Eg1, smul=\Eg1,
13693 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13694 OTbs, am, da, db, mir, msgr, ul,
13695 cols#80, it#8, lines#24,
13696 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13697 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13698 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13699 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13700 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13701 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13702 smso=\Eg4, smul=\Eg1,
13703 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13704 ts100|ts100-sp|falco ts100-sp,
13705 am, mir, msgr, xenl, xon,
13706 cols#80, it#8, lines#24, vt#3,
13707 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13708 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13709 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13710 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13711 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13712 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13713 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13714 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13715 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13716 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13717 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13718 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13719 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13720 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13721 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13722 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13724 ts100-ctxt|falco ts-100 saving context,
13725 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13727 #### Florida Computer Graphics
13730 # Florida Computer Graphics Beacon System, using terminal emulator program
13731 # "host.com", as provided by FCG. This description is for an early release
13732 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13735 # From: David Bryant <cbosg!djb> 1/7/83
13736 beacon|FCG Beacon System,
13739 bel=\ESTART\r\E37\r\EEND\r$<1>,
13740 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13741 cub1=^H, cud1=^J, cuf1=\EV,
13742 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13743 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13744 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13745 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13746 rmul=\ESTART\r\E60\,0\r\EEND\r,
13747 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13748 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13749 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13750 smul=\ESTART\r\E60\,1\r\EEND\r,
13755 # The f1720a differences from ANSI: no auto margin, destructive
13756 # tabs, # of lines, funny highlighting and underlining
13757 f1720|f1720a|fluke 1720A,
13759 cols#80, lines#16, xmc#1,
13760 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13761 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13762 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13763 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13764 smso=\E[7m, smul=\E[4m,
13766 #### Liberty Electronics (Freedom)
13768 # Liberty Electronics
13769 # 48089 Fremont Blvd
13771 # Vox: (510)-623-6000
13772 # Fax: (510)-623-7021
13774 # From: <faletti@berkeley.edu>
13775 # (f100: added empty <acsc> to suppress a tic warning;
13776 # made this relative to adm+sgr -- note that <invis> isn't
13777 # known to work for f100 but does on the f110. --esr)
13778 f100|freedom|freedom100|freedom model 100,
13779 OTbs, am, bw, hs, mir, msgr, xon,
13781 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13782 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13783 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13784 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13785 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13786 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13787 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13788 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13789 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13790 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13791 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13792 f100-rv|freedom-rv|freedom 100 in reverse video,
13793 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13794 # The f110 and f200 have problems with vi(1). They use the ^V
13795 # code for the down cursor key. When kcud1 is defined in terminfo
13796 # as ^V, the Control Character Quoting capability (^V in insert mode)
13797 # is lost! It cannot be remapped in vi because it is necessary to enter
13798 # a ^V to to quote the ^V that is being remapped!!!
13800 # f110/f200 users will have to decide whether
13801 # to lose the down cursor key or the quoting capability. We will opt
13802 # initially for leaving the quoting capability out, since use of VI
13803 # is not generally applicable to most interactive applications
13804 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13805 f110|freedom110|Liberty Freedom 110,
13808 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13809 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13810 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13811 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13812 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13813 smso=\EG<, tsl=\Ef, use=f100,
13814 f110-14|Liberty Freedom 110 14inch,
13816 f110-w|Liberty Freedom 110 - 132 cols,
13817 cols#132, use=f110,
13818 f110-14w|Liberty Freedom 110 14in/132 cols,
13821 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13822 f200|freedom200|Liberty Freedom 200,
13823 OTbs, am, eslok, hs, mir, msgr, xon,
13824 cols#80, it#8, lines#24, wsl#80,
13825 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13826 clear=^Z, cnorm=\E.1, cr=^M,
13827 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13828 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13829 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13830 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13831 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13832 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13833 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13834 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13835 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13836 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13837 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13838 f200-w|Liberty Freedom 200 - 132 cols,
13839 cols#132, use=f200,
13840 # The f200 has the ability to reprogram the down cursor key. The key is
13841 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13842 # so powering the terminal off and on will not cause the change to be lost.
13843 f200vi|Liberty Freedom 200 for vi,
13844 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13845 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13846 cols#132, use=f200vi,
13850 # Graphon Corporation
13851 # 544 Division Street
13852 # Campbell, CA 95008
13853 # Vox: (408)-370-4080
13854 # Fax: (408)-370-5047
13855 # Net: troy@graphon.com (Troy Morrison)
13858 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13859 # including one odd hybrid that starts out life on power-up as a character
13860 # terminal, than can be switched to X graphics mode (driven over the serial
13861 # line) by an escape sequence. No info on this beast yet.
13862 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13863 go140|graphon go-140,
13865 cols#80, it#8, lines#24,
13866 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
13867 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13868 ed=\E[J$<10/>, el=\E[K, ht=^I,
13869 if=/usr/share/tabset/vt100, il1=\E[L,
13870 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13871 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13872 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13873 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13874 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13875 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13876 go140w|graphon go-140 in 132 column mode,
13879 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13881 # Hacked up vt200 termcap to handle GO-225/VT220
13882 # From: <edm@nwnexus.WA.COM>
13883 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13884 go225|go-225|Graphon 225,
13885 OTbs, am, mir, xenl,
13886 cols#80, it#8, lines#25, vt#3,
13887 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13888 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13889 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13890 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13891 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13892 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13893 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13894 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13895 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13896 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13897 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13898 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13900 #### Harris (Beehive)
13902 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13903 # Their terminal group is ancient history now (1995) though the parent
13904 # company is still in business.
13907 # Beehive documentation is undated and marked Preliminary and has no figures
13908 # so we must have early Superbee2 (Model 600, according to phone conversation
13909 # with mfr.). It has proved reliable except for some missing padding
13910 # (notably after \EK and <nl> at bottom of screen).
13912 # The key idea is that AEP mode is poison for <cup> & that US's in
13913 # the local memory should be avoided like the plague. That means
13914 # that the 2048 character local buffer is used as 25 lines of 80
13915 # characters, period. No scrolling local memory, folks. It also
13916 # appears that we cannot use naked INS LINE feature since it uses
13917 # US. The sbi fakes <il1> with an 80-space insert that may be too
13918 # slow at low speeds; also spaces get converted to \040 which is
13919 # too long for some programs (not vi). DEL LINE is ok but slow.
13921 # The <nl> string is designed for last line of screen ONLY; cup to
13922 # 25th line corrects the motion inherent in scrolling to Page 1.
13924 # There is one understood bug. It is that the screen appears to
13925 # pop to a new (blank) page after a <nel>, or leave a half-line
13926 # ellipsis to a quad that is the extra 48 memory locations. The
13927 # data received is dumped into memory but not displayed. Not to
13928 # worry if <cup> is being used; the lines not displayed will be,
13929 # whenever the cursor is moved up there. Since <cup> is addressed
13930 # relative to MEMORY of window, nothing is lost; but beware of
13931 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13932 # therefore, is setenv MORE -c .
13934 # WARNING: Not all features tested.
13936 # Timings are assembled from 3 sources. Some timings may reflect
13937 # SB2/Model 300 that were used if more conservative.
13938 # Tested on a Model 600 at 1200 and 9600 bd.
13940 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13941 # placed on the keyboard and useless because of AEP, is made
13942 # into a backspace key. In use ESC must be pressed twice (to send)
13943 # and sending ^C must be prefixed by ESC to avoid that weird
13944 # transmit mode associated with ENTER key.
13946 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13947 # the screen, then it has dropped into ENTER mode; hit
13948 # RESET--ONLINE--!tset.
13950 # As delivered this machine has a FATAL feature that will throw
13951 # it into that strange transmit state (SPOW) if the space bar is
13952 # hit after a CR is received, but before receiving a LF (or a
13955 # The circuits MUST be modified to eliminate the SPOW latch.
13956 # This is done by strapping on chip A46 of the I/O board; cut
13957 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13958 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13959 # With this modification absurdly high timings on cr are
13962 # NOTE WELL that the rear panel switch should be set to CR/LF,
13965 sb1|beehive superbee,
13966 OTbs, am, bw, da, db, mir, ul, xsb,
13967 cols#80, lines#25, xmc#1,
13968 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
13969 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
13970 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
13971 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
13972 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
13973 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
13974 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
13975 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
13976 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
13977 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
13978 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
13979 smso=\E_1, smul=\E_0, tbc=\E3,
13980 sbi|superbee|beehive superbee at Indiana U.,
13982 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
13984 # Alternate (older) description of Superbee - f1=escape, f2=^C.
13985 # Note: there are at least 3 kinds of superbees in the world. The sb1
13986 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
13987 # The sb3 puts garbage on the bottom of the screen when you scroll with
13988 # the switch in the back set to CRLF instead of AEP. This description
13989 # is tested on the sb2 but should work on all with either switch setting.
13990 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
13991 # the other two if you want to try to hit that tiny escape key.
13992 # This description is tricky: being able to use cup depends on there being
13993 # 2048 bytes of memory and the hairy <nl> string.
13994 superbee-xsb|beehive super bee,
13996 cols#80, it#8, lines#25,
13997 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
13998 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
13999 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14000 home=\EH, ht=^I, hts=\E1,
14001 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14002 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14003 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14004 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14005 # This loses on lines > 80 chars long, use at your own risk
14006 superbeeic|super bee with insert char,
14007 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14008 sb2|sb3|fixed superbee,
14009 xsb@, use=superbee,
14011 #### Beehive Medical Electronics
14013 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14014 # Regarding your question though; Beehive terminals weren't made by Harris.
14015 # They were made by Beehive Medical Electronics in Utah. They went out of
14016 # business in the early '80s.
14018 # (OK, then, I don't know why a couple of these say "harris beehive".)
14021 # Reports are that most of these Beehive entries (except superbee) have not
14022 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14024 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14025 beehive|bee|harris beehive,
14028 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14029 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14030 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14031 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14032 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14033 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14034 smir=\EQ, smso=\EdP, smul=\Ed`,
14035 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14036 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14037 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14038 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14039 # really care, cook up one using ^F -- esr)
14040 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14042 cols#80, it#8, lines#20,
14043 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14044 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14045 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14046 beehive4|bh4|beehive 4,
14049 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14050 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14051 # There was an early Australian kit-built computer called a "Microbee".
14052 # It's not clear whether this is for one of those or for a relative
14054 microb|microbee|micro bee series,
14056 cols#80, it#8, lines#24,
14057 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14058 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14059 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14060 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14061 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14062 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14064 # 8675, 8686, and bee from Cyrus Rahman
14065 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14066 ha8675|harris 8675,
14067 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14068 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14069 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14070 kf8=\177, kf9=\Ee, use=bee,
14071 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14073 ha8686|harris 8686,
14074 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14075 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14076 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14077 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14078 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14083 # Hazeltine appears to be out of the terminal business as of 1995. These
14084 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14085 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14089 # 450 East Pulaski Road
14090 # Greenlawn, New York 11740
14092 # As late as 1993, manuals for the terminal product line could still be
14095 # TRW Customer Service Division
14098 # Fairfield, NJ 07007-2078
14100 # They're now (1998) a subsidiary of General Electric, operating under the
14101 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14102 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14105 # Since <cuf1> is blank, when you want to erase something you
14106 # are out of luck. You will have to do ^L's a lot to
14107 # redraw the screen. h1000 is untested. It doesn't work in
14108 # vi - this terminal is too dumb for even vi. (The code is
14109 # there but it isn't debugged for this case.)
14110 hz1000|hazeltine 1000,
14113 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14115 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14116 hz1420|hazeltine 1420,
14119 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14120 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14121 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14123 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14124 # freakout with out-of-range args and tn3270. No hz since it needs to
14126 hz1500|hazeltine 1500,
14129 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14130 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14131 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14132 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14133 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14134 # h1510 assumed to be in sane escape mode. Else use h1500.
14135 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14136 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14137 # removed incorrect and overridden ":do=^J:" -- esr)
14138 hz1510|hazeltine 1510,
14141 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14142 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14143 el=\E^O, il1=\E^Z, ind=^J,
14145 # The following switch settings are assumed for normal operation:
14146 # FULL CR U/L_CASE ESCAPE
14147 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14148 # Other switches may be set for operator convenience or communication
14150 hz1520|Hazeltine 1520,
14151 OTbs, am, bw, msgr,
14153 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14154 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14155 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14156 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14157 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14158 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14159 # This version works with the escape switch off
14160 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14161 hz1520-noesc|hazeltine 1520,
14164 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14165 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
14166 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
14167 # Note: the h1552 appears to be the first Hazeltine terminal which
14168 # is not braindamaged. It has tildes and backprimes and everything!
14169 # Be sure the auto lf/cr switch is set to cr.
14170 hz1552|hazeltine 1552,
14172 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
14173 lf2=red, lf3=green, use=vt52,
14174 hz1552-rv|hazeltine 1552 reverse video,
14175 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
14176 # Note: h2000 won't work well because of a clash between upper case and ~'s.
14177 hz2000|hazeltine 2000,
14180 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
14181 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
14182 il1=~\032$<6>, ind=^J, pad=\177,
14183 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
14184 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
14185 # to work ok. There is one problem though if one types a lot of garbage
14186 # characters very fast vi seems not able to keep up and hangs while trying
14187 # to insert. That's in insert mode while trying to insert in the middle of
14188 # a line. It might be because the Esprit doesn't have insert char and delete
14189 # char as a built in function. Vi has to delete to end of line and then
14190 # redraw the rest of the line.
14191 esprit|Hazeltine Esprit I,
14194 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
14195 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14196 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
14197 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
14198 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
14199 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
14200 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
14201 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
14202 esprit-am|hazeltine esprit auto-margin,
14204 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
14205 # Vi it seems always wants to send a control J for "do" and it turned out
14206 # that the terminal would work somewhat if the auto LF/CR was turned off.
14207 # (hmod1: removed :dn=~^K: -- esr)
14208 hmod1|Hazeltine Modular 1,
14211 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14212 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
14213 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
14214 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
14216 # Hazeltine Executive 80 Model 30 (1554?)
14217 # from Will Martin <control@ALMSA-1.ARPA> via BRL
14218 # Like VT100, except for different "am" behavior.
14219 hazel|exec80|h80|he80|Hazeltine Executive 80,
14221 cols#80, it#8, lines#24, vt#3,
14222 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
14223 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14224 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
14225 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
14226 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
14227 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
14228 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14229 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
14230 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
14231 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
14232 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14233 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
14239 ibm327x|line mode IBM 3270 style,
14241 clear=^M^J, el=^M, home=^M,
14243 ibm3101|i3101|IBM 3101-10,
14246 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14247 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14248 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
14249 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
14250 ibm3151|IBM 3151 display,
14251 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
14252 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
14253 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
14254 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
14255 # removed kend, knp, kpp -TD
14256 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
14257 OTbs, am, mir, msgr,
14258 cols#80, it#8, lines#24,
14259 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
14260 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
14261 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14262 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
14263 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
14264 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
14265 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
14266 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
14267 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
14268 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
14269 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
14270 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
14271 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
14272 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
14273 rmso=\E4@, rmul=\E4@,
14274 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
14275 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
14277 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
14278 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
14279 ibm3162|IBM 3162 display,
14280 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
14281 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
14284 # This really should not use setab/setaf, but it is clear that the
14285 # original terminfo does not toggle red/blue colors as in setb/setf.
14286 ibm3164|i3164|IBM 3164,
14288 colors#8, pairs#64,
14289 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
14290 setab=\E4 %p1%{64}%+%c,
14291 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
14292 smcup=\E!9/N\E>B, use=ibm3161,
14294 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
14296 cols#80, it#8, lines#25,
14297 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14298 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14299 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14300 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14301 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
14302 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
14303 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
14304 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
14305 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14306 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
14307 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
14308 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
14309 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
14310 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
14311 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
14312 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
14313 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
14314 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
14315 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14316 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
14317 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
14318 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
14319 rmso=\E[m, rmul=\E[m, rs2=\Ec,
14320 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
14321 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14323 ibmaed|IBM Experimental display,
14324 OTbs, am, eo, msgr,
14325 cols#80, it#8, lines#52,
14326 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
14327 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14328 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
14329 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14330 rmso=\E0, sgr0=\E0, smso=\E0,
14331 ibm-apl|apl|IBM apl terminal simulator,
14332 lines#25, use=dm1520,
14333 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
14334 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
14335 ibmmono|IBM workstation monochrome,
14337 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
14338 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
14339 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
14340 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
14341 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
14342 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
14344 ibmega|IBM Enhanced Color Display,
14345 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14346 nel=^M^J, use=ibmmono,
14347 # This color scheme is assumed in some recent IBM terminal descriptions
14348 # (green on black, emulated on a 16-color terminal).
14349 ibm+color|IBM color definitions,
14350 colors#8, ncv#3, pairs#64,
14352 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
14353 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
14354 ibm+16color|IBM aixterm color definitions,
14355 colors#16, pairs#256,
14356 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
14357 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
14358 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14359 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14360 ibm5154|IBM 5154 Color display,
14361 colors#8, ncv@, pairs#64,
14362 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14364 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
14365 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
14367 ibmvga-c|IBM VGA display color termcap,
14368 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14369 nel=^M^J, use=ibmega-c,
14370 ibmvga|IBM VGA display,
14371 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14372 nel=^M^J, use=ibmega,
14373 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
14374 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
14376 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
14377 ibm6155|IBM 6155 Black & White display,
14378 blink@, bold@, use=ibm5151,
14379 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
14380 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
14382 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
14383 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
14385 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
14387 ibm6154|IBM 6154 Color displays,
14388 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14389 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14390 sgr0=\E[0;10m, use=ibm5154,
14391 ibm6153|IBM 6153 Black & White display,
14392 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14393 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14394 sgr0=\E[0;10m, use=ibm5151,
14395 ibm6153-90|IBM 6153 Black & White display,
14397 blink@, bold@, use=ibm5151,
14398 ibm6153-40|IBM 6153 Black & White display,
14399 cols#40, lines#12, use=ibm6153-90,
14400 ibm8512|ibm8513|IBM color VGA Terminal,
14402 cols#80, it#8, lines#25,
14403 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
14404 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
14405 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
14406 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
14407 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
14408 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
14409 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14410 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
14411 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
14412 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
14413 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
14414 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
14415 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14417 hft-c|HFT with Color,
14418 colors#8, pairs#64,
14419 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
14420 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
14421 use=ibm5151, use=ibm+color,
14422 hft-c-old|HFT with Color PC850,
14423 colors#8, pairs#64,
14424 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14426 hft-old|AIWS High Function Terminal,
14429 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14430 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14431 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14432 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
14433 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14434 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
14435 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14436 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
14437 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
14438 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14439 ibm-system1|system1|ibm system/1 computer,
14442 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
14443 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
14445 # lft-pc850 : IBM Low Function Terminal Device
14446 # lft "supports" underline, bold, and blink in the sense that the lft code
14447 # sets all the right bits. HOWEVER, depending upon the adapter, these
14448 # attributes may or may not be supported by the device driver.
14449 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
14451 cols#80, it#8, lines#25,
14452 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14453 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14454 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14455 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14456 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14457 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
14458 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
14459 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
14460 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
14461 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
14462 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
14463 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
14464 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
14465 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
14466 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
14467 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
14468 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
14469 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
14470 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14471 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
14472 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
14473 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
14474 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
14475 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14476 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14478 ibm5081|hft|IBM Megapel Color display,
14479 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
14480 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14481 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
14484 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
14486 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
14488 ibm8514|IBM 8514/a color VGA display,
14490 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14491 ibm8514-c|IBM 8514 color display with standout and underline,
14494 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
14495 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
14499 # AIX entries. IBM ships these with AIX 3.2.5.
14500 # -- added rc, sc based on manpage -TD
14501 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14502 aixterm|IBM Aixterm Terminal Emulator,
14504 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14505 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14506 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14507 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14508 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
14510 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14511 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
14512 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14513 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14514 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
14516 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
14517 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14518 tsl=\E[?%p1%dT, use=ibm6153,
14519 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
14520 acsc@, use=aixterm,
14521 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
14522 acsc@, use=aixterm-m,
14524 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
14525 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
14526 use=ibm+16color, use=aixterm,
14528 #### Infoton/General Terminal Corp.
14531 # gt100 sounds like something DEC would come out with. Let's hope they don't.
14532 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
14535 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14536 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
14537 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
14538 ind=^J, rmso=\Ea, smso=\Eb,
14542 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14543 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
14544 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
14545 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
14546 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
14550 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
14551 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
14552 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
14556 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
14557 ed=^K, ind=^J, ll=^H^\,
14559 # The ICL6402 was actually the Kokusai Display System 6402.
14560 # The 6404 was the KDS7372 (color version of the 6402).
14562 # ICL6404 control codes follow:
14565 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14566 #ctrl-A set SOM position at cursor position
14572 #ctrl-L Cursor right
14573 #ctrl-M Carriage return
14574 #ctrl-N Disable xon/xoff to host
14575 #ctrl-O Enable xon/xoff to host
14576 #ctrl-R Enable bidirectional mode
14577 #ctrl-T Disable bidirectional mode
14578 #ctrl-V Cursor down
14579 #ctrl-Z Clear unprotected data to insert char
14580 #ctrl-^ Cursor home
14583 #ESC lead-in char for multiple character command
14585 #ESC space R execute power on sequence
14586 #ESC ! p1 p2 define scroll region:
14587 # p1 = scroll top line: 20h - 37h
14588 # p1 = scroll bottom line: 20h - 37h
14589 #ESC " unlock keyboard
14590 #ESC # lock keyboard
14591 #ESC $ Semi-graphics mode on
14592 #ESC % Semi-graphics mode off
14593 #ESC & protect mode on
14594 #ESC ' protect mode off
14595 #ESC ( write protect mode off (full intensity)
14596 #ESC ) write protect mode on (half intensity)
14598 #ESC * clear screen
14599 #ESC + clear unprotected data to insert char
14600 #ESC , clear unprotected data to half intensity spaces
14601 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14602 # p1 = page number 0 - 3
14603 # p2 = row 20h - 7fh
14604 # p3 = column (lo) 20h - 7fh
14605 # p4 = column (hi) 20h - 21h (only 132 col)
14606 #ESC . p1 set cursor style:
14607 # p1 = 0 invisible cursor
14608 # p1 = 1 block blinking cursor
14609 # p1 = 2 block steady cursor
14610 # p1 = 3 underline blinking cursor
14611 # p1 = 4 underline steady cursor
14612 #ESC / transmit cursor location (page, row, column)
14613 #ESC 0 p1 p2 p3 p4 program edit key:
14614 # p1 = edit key code: '@'-'S', '`'-'s'
14615 # p2 p3 p4 = program data (3 bytes)
14618 #ESC 2 clear tab at cursor
14619 #ESC 3 clear all tabs
14620 #ESC 4 send unprotect line to cursor
14621 #ESC 5 send unprotect page to cursor
14622 #ESC 6 send line to cursor
14623 #ESC 7 send page to cursor
14624 #ESC 8 n set scroll mode:
14625 # n = 0 set jump scroll
14626 # n = 1 set smooth scroll
14627 #ESC 9 n control display:
14628 # n = 0 display off
14630 #ESC : clear unprotected data to null
14631 #ESC ; clear unprotected data to insert char
14634 #ESC = p1 p2 address cursor to row, column
14635 # p1 = row 20h - 7fh
14636 # p2 = column (lo) 20h - 7fh
14637 # p3 = column (hi) 20h - 21h (only 132 col)
14638 #ESC > keyclick off
14639 #ESC ? transmit cursor location (row, column)
14641 #ESC @ copy print mode on
14642 #ESC A copy print mode off
14643 #ESC B block mode on
14644 #ESC C block mode off (conversation mode)
14645 #ESC D F set full duplex
14646 #ESC D H set half duplex
14648 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14649 # 0 = black, 1 = red, 2 = green, 3 = yellow
14650 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14651 #ESC G n set serial field attribute (n = 30h - 3Fh)
14652 #ESC H n full graphics mode:
14653 # n = 0 exit full graphics mode
14654 # n = 1 enter full graphics mode
14657 #ESC K forward page
14659 #ESC L unformatted page print
14660 #ESC M L move window left (132 col mode only)
14661 #ESC M R move window right (132 col mode only)
14662 #ESC N set page edit (clear line edit)
14663 #ESC O set line edit (clear page edit)
14664 #ESC P formatted page print
14665 #ESC Q character insert
14667 #ESC S send message unprotected only
14668 #ESC T erase line to insert char
14669 #ESC U set monitor mode (see ESC X, ESC u)
14671 #ESC V n select video attribute mode:
14672 # n = 0 serial field attribute mode
14673 # n = 1 parallel character attribute mode
14674 #ESC V 2 n define line attribute:
14675 # n = 0 single width single height
14676 # n = 1 single width double height
14677 # n = 2 double width single height
14678 # n = 3 double width double height
14679 #ESC V 3 n select character font:
14680 # n = 0 system font
14681 # n = 1 user defined font
14682 #ESC V 4 n select screen mode:
14683 # n = 0 page screen mode
14684 # n = 1 virtual screen mode
14685 #ESC V 5 n control mouse mode:
14686 # n = 0 disable mouse
14687 # n = 1 enable sample mode
14688 # n = 2 send mouse information
14689 # n = 3 enable request mode
14690 #ESC W character delete
14691 #ESC X clear monitor mode (see ESC U, ESC u)
14692 #ESC Y erase page to insert char
14694 #ESC Z n send user/status line:
14695 # n = 0 send user line
14696 # n = 1 send status line
14697 # n = 2 send terminal ID
14698 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14702 # 3 = blink blank (= blank)
14704 # 5 = reverse blank
14705 # 6 = reverse blink
14706 # 7 = reverse blink blank (= reverse blank)
14708 # 9 = underline blank
14709 # : = underline blink
14710 # ; = underline blink blank
14711 # < = reverse underline
14712 # = = reverse underline blank
14713 # > = reverse underline blink
14714 # ? = reverse underline blink blank
14715 # p2, p3: f/grnd, b/grnd colour
14716 # (see ESC F for colours)
14717 # use ZZ for mono, eg.
14718 # ESC [ 0 Z Z for normal
14719 # ESC [ 4 Z Z for inverse etc.
14721 #ESC \ n set page size:
14722 # n = 1 24 lines/page
14723 # n = 2 48 lines/page
14724 # n = 3 72 lines/page
14725 # n = 4 96 lines/page
14726 #ESC ] n set Wordstar mode:
14727 # n = 0 normal (KDS7372) mode
14728 # n = 1 Wordstar mode
14730 #ESC b set foreground colour screen
14732 #ESC c n enter self-test mode:
14733 # n = 0 exit self test mode
14737 # n = 4 screen display test
14738 # n = 5 main/printer port test
14739 # n = 6 mouse port test
14740 # n = 7 graphics board test
14741 # n = 8 graphics memory test
14742 # n = 9 display all 'E'
14743 # n = : display all 'H'
14744 #ESC d set background colour screen
14746 #ESC e n program insert char (n = insert char)
14747 #ESC f text CR load user status line with 'text'
14749 #ESC g display user status line on 25th line
14750 #ESC h display system status line on 25th line
14752 #ESC j reverse linefeed
14753 #ESC k n duplex/local edit mode:
14754 # n = 0 duplex edit mode
14755 # n = 1 local edit mode
14756 #ESC l n select virtual screen:
14759 #ESC m save current config to NVRAM
14760 #ESC n p1 select display screen:
14765 #ESC o p1 p2 set characters/line and attribute:
14766 # p1 = 0 80 chars/line
14768 #ESC o p1 p2 set characters/line and attribute:
14769 # p1 = 0 80 chars/line
14770 # p1 = 1 132 chars/line
14771 # p2 = 0 single width single height
14772 # p2 = 1 single width double height
14773 # p2 = 2 double width single height
14774 # p2 = 3 double width double height
14776 #ESC q insert mode on
14777 #ESC r edit mode on
14778 #ESC s send message all
14779 #ESC t erase line to null
14780 #ESC u clear monitor mode (see ESC U, ESC X)
14781 #ESC v autopage mode on
14782 #ESC w autopage mode off
14783 #ESC x p1 p2 p3 define delimiter code...
14784 #ESC y erase page to null
14786 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14787 # p1 = starting row
14788 # p2 = starting column
14792 #ESC { p1 p2 p3 p4 configure main port
14793 # (baud, stop bits, parity, word length)
14795 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14796 # p1 = function key code:
14797 # '1' - ';' normal f1- f11
14798 # '<' - 'F' shifted f1 - f11
14799 # p2 = program mode:
14803 # Ctrl-Y = terminator
14804 # (use Ctrl-P to escape ^P, ^Y )
14806 #ESC } p1 p2 p3 p4 configure printer port
14807 # (baud, stop bits, parity, word length)
14808 #ESC ~ send system status
14810 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14812 # Entry is by esr going solely on above information and is UNTESTED.
14813 # This actually looks a lot like a Televideo 9xx.
14814 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14815 # to make color work without a test terminal. The <am> capability is a guess.
14816 # The initialization string sets conversation mode, blinking underline cursor,
14817 # full duplex, parallel attribute mode, display user status line, white
14818 # foreground, black background, normal highlight.
14820 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14823 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14825 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14826 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14827 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14828 hts=\E1, il1=\EE, invis=\E[1ZZ,
14829 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14830 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14831 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14832 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
14833 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14834 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14835 rs2=\Eo1, use=icl6404,
14837 #### Interactive Systems Corp
14839 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14840 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14841 # bought out by Sun.
14844 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14845 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14846 # ":le=^_:" later overridden -- esr)
14847 intext|Interactive Systems Corporation modified owl 1200,
14849 cols#80, it#8, lines#24, xmc#1,
14850 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14851 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14852 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14853 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14854 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14855 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14856 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14857 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14859 intext2|intextii|INTERACTIVE modified owl 1251,
14861 cols#80, lines#24, xmc#0,
14862 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
14863 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14864 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14865 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14866 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14867 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14868 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14869 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14870 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14871 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14872 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14875 #### Kimtron (abm, kt)
14877 # Kimtron seems to be history, but as March 1998 these people are still
14878 # offering repair services for Kimtron equipment:
14880 # Com/Pair Monitor Service
14881 # 1105 N. Cliff Ave.
14882 # Sioux Falls, South Dakota 57103
14884 # WATS voice: 1-800/398-4946
14885 # POTS fax: +1 605/338-8709
14886 # POTS voice: +1 605/338-9650
14887 # Email: <compair@sd.cybernex.net>
14888 # Internet/Web: <http://www.com-pair.com>
14890 # Kimtron entries include (undocumented) codes for: enter dim mode,
14891 # enter bold mode, enter reverse mode, turn off all attributes.
14894 # Kimtron ABM 85 added by Dual Systems
14895 # (abm85: removed duplicated ":kd=^J:" -- esr)
14896 abm85|Kimtron ABM 85,
14897 OTbs, am, bw, msgr,
14898 cols#80, it#8, lines#24, xmc#1,
14899 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14900 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14901 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14902 if=/usr/share/tabset/stdcrt, il1=\EE,
14903 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14904 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14905 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14906 # Kimtron ABM 85H added by Dual Systems.
14907 # Some notes about the abm85h entries:
14908 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14909 # firmware revs prior to SP51
14910 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14911 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14912 # in some places and NOT software settable i.e., <is2> can't fix it)
14913 # 3) In 85h mode, the arrow keys and special functions transmit when
14914 # the terminal is in dup-edit, and work only locally in local-edit.
14915 # Vi won't swallow `del char' for instance, but <smcup> turns on
14916 # dup-edit anyway so that the arrow keys will work right. If the
14917 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14918 # <is2>. Note that 920E mode does not have software commands to toggle
14919 # between dup and local edit, so you get whatever was set last on the
14921 # 4) <flash> attribute is nice, but seems too slow to work correctly
14923 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14924 # are selected, the <xmc@> entry should be removed.
14925 # 6) auto new-line should be on (selectable from setup mode only)
14927 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14928 abm85h|Kimtron ABM 85H native mode,
14931 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14933 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14934 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14936 abm85e|Kimtron ABM 85H in 920E mode,
14938 bel=^G, dim=\E), flash@,
14939 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14940 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14941 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14944 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14945 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14946 # From: <malman@bbn-vax.arpa>
14947 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14948 kt7|kimtron model kt-7,
14950 cols#80, it#8, lines#24,
14951 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14952 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14953 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14954 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14955 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14956 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14957 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14958 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14959 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14960 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
14961 # other kt7 entry and the adjacent key capabilities). Removed EE which is
14962 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
14963 # but we can't figure out what.
14964 kt7ix|kimtron model kt-7 or 70 in IX mode,
14966 cols#80, it#8, lines#25,
14967 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
14968 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
14969 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14970 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
14971 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
14972 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
14973 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
14974 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14975 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14976 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
14977 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
14978 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
14980 #### Microdata/MDIS
14982 # This was a line of terminals made by McDonnell-Douglas Information Systems.
14983 # These entries come direct from MDIS documentation. I have edited them only
14984 # to move primary names of the form p[0-9] * to aliases, and to comment out
14985 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
14986 # also removed the change history; the last version indicates this is
14987 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
14990 # McDonnell Information Systems Terminal Family History
14991 # =========================================
14993 # Prism-1, Prism-2 and P99:
14994 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
14996 # Prism-4 and Prism-5:
14997 # Slightly less ancient range of Microdata terminals. Follow-on from
14998 # Prism-2, but with many enhancements. P5 has eight display pages.
15001 # A special terminal for use with library systems, primarily in Germany.
15002 # Limited numbers. Similar functionality to P5 (except attributes?).
15004 # Prism-7, Prism-8 and Prism-9:
15005 # More recent range of MDIS terminals, in which P7 and P8
15006 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15007 # The P9 has two emulation modes - P8 and ANSI - and includes a
15008 # large number of the DEC VT220 control sequences. Both
15009 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15011 # Prism-12 and Prism-14:
15012 # Latest range, functionally very similar to the P9. The P14 has a
15013 # black-on-white overscanning screen.
15015 # The terminfo definitions given here are:
15017 # p2 - Prism-2 (or Prism-1 or P99).
15019 # p4 - Prism-4 (and older P7s & P8s).
15020 # p5 - Prism-5 (or Prism-6).
15023 # p8 - Prism-8 (in national or multinational mode).
15024 # p8-w - 132 column version of p8.
15025 # p9 - Prism-9 in ANSI mode.
15026 # p9-w - 132 column version of p9.
15027 # p9-8 - Prism-9 in Prism-8 emulation mode.
15028 # p9-8-w - As p9-8, but with 132 columns.
15030 # p12 - Prism-12 in ANSI mode.
15031 # p12-w - 132 column version of p12.
15032 # p12-m - Prism-12 in MDC emulation mode.
15033 # p12-m-w - As p12-m, but with 132 columns.
15034 # p14 - Prism-14 in ANSI mode.
15035 # p14-w - 132 column version of p14.
15036 # p14-m - Prism-14 in MDC emulation mode.
15037 # p14-m-w - As p14-m, but with 132 columns.
15042 # Includes Prism-1 and basic P99 without SP or MP loaded.
15043 # The simplest form of Prism-type terminal.
15044 # Basic cursor movement and clearing operations only.
15045 # No video attributes.
15047 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15048 # value up, followed by backspace.
15050 prism2|MDC Prism-2,
15053 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15054 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15055 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15056 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15057 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15062 # Includes early versions of P7 & P8.
15063 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15065 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15066 # value up, followed by backspace.
15067 # Cursor key definitions removed because they interfere with vi and csh keys.
15069 prism4|p4|P4|MDC Prism-4,
15070 am, bw, hs, mc5i, msgr,
15071 cols#80, lines#24, wsl#72, xmc#1,
15072 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15073 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15074 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15075 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15076 fsl=^]\345, home=^A,
15077 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15078 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15079 rev=^CD, rmso=^C\s, rmul=^C\s,
15080 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15081 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15082 vpa=\013%p1%{32}%+%c,
15087 # Same definition as p4. Includes Prism-6 (not tested!).
15088 # Does not use any multi-page features.
15090 prism5|p5|P5|MDC Prism-5,
15096 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15098 # Use p4 for very early models of P7.
15099 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15101 prism7|p7|P7|MDC Prism-7,
15102 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15107 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15108 # Supports national and multinational character sets.
15110 # Alternate char set operations only work in multinational mode.
15111 # Use p4 for very early models of P8.
15112 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15113 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15115 prism8|p8|P8|MDC Prism-8,
15116 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15117 vpa=\E[%i%p1%dd, use=p4,
15119 # p8-w: Prism-8 in 132 column mode
15120 # --------------------------------
15122 # 'Wide' version of p8.
15124 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15126 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15128 is2=\E[<12h\E[<14h, use=p8,
15130 # p9: Prism-9 in ANSI mode
15131 # -------------------------
15133 # The "flagship" model of this generation of terminals.
15134 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15136 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15137 # Fixes to deal with terminal firmware bugs:
15138 # . 'ri' uses insert-line since rev index doesn't always
15139 # . 'sgr0' has extra '0' since esc[m fails
15140 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15141 # Not covered in the current definition:
15143 # . Programming Fn keys
15144 # . Graphic characters (defaults correctly to vt100)
15145 # . Padding values (sets xon)
15146 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15148 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15149 am, bw, hs, mc5i, msgr, xenl, xon,
15150 cols#80, it#8, lines#24, vt#3, wsl#72,
15151 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15152 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15153 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15154 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15155 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15156 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15157 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15158 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15159 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15160 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15161 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15162 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
15163 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
15164 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
15165 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
15166 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
15167 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
15168 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
15170 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
15171 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15172 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
15174 # p9-w: Prism-9 in 132 column mode
15175 # --------------------------------
15177 # 'Wide' version of p9.
15179 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
15181 is2=\E[&p\E[<12l\E F\E[<14h,
15182 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
15184 # p9-8: Prism-9 in P8 mode
15185 # ------------------------
15187 # P9 terminal in P8 emulation mode.
15188 # Similar to p8 definition.
15189 # Insertion and deletion operations possible.
15191 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
15192 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15193 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
15195 # p9-8-w: Prism-9 in P8 and 132 column modes
15196 # ------------------------------------------
15198 # P9 terminal in P8 emulation mode and 132 column mode.
15200 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
15201 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15202 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
15204 # p12: Prism-12 in ANSI mode
15205 # ---------------------------
15207 # See p9 definition.
15209 prism12|p12|P12|MDC Prism-12 in ANSI mode,
15212 # p12-w: Prism-12 in 132 column mode
15213 # ----------------------------------
15215 # 'Wide' version of p12.
15217 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
15220 # p12-m: Prism-12 in MDC emulation mode
15221 # -------------------------------------
15223 # P12 terminal in MDC emulation mode.
15224 # Similar to p8 definition.
15225 # Insertion and deletion operations possible.
15227 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
15230 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
15231 # -------------------------------------------------------
15233 # P12 terminal in MDC emulation mode and 132 column mode.
15235 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
15238 # p14: Prism-14 in ANSII mode
15239 # ---------------------------
15241 # See p9 definition.
15243 prism14|p14|P14|MDC Prism-14 in ANSII mode,
15246 # p14-w: Prism-14 in 132 column mode
15247 # ----------------------------------
15249 # 'Wide' version of p14.
15251 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
15254 # p14-m: Prism-14 in MDC emulation mode
15255 # -------------------------------------
15257 # P14 terminal in MDC emulation mode.
15258 # Similar to p8 definition.
15259 # Insertion and deletion operations possible.
15261 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
15264 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
15265 # -------------------------------------------------------
15267 # P14 terminal in MDC emulation mode and 132 column mode.
15269 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
15272 # End of McDonnell Information Systems Prism definitions
15274 # These things were popular in the Pick database community at one time
15275 # From: George Land <georgeland@aol.com> 24 Sep 1996
15276 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
15278 cols#80, lines#24, ma#1, wsl#78, xmc#1,
15279 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
15280 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
15281 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
15282 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
15283 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
15284 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
15285 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15286 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
15287 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
15288 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
15291 #### Microterm (act, mime)
15293 # The mime1 entries refer to the Microterm Mime I or Mime II.
15294 # The default mime is assumed to be in enhanced act iv mode.
15297 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
15298 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
15299 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
15300 # since Sytek insists ^S means xoff.
15301 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
15302 act4|microterm|microterm act iv,
15305 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
15306 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
15307 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
15308 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
15309 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
15311 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
15312 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
15313 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
15314 act5|microterm5|microterm act v,
15315 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
15317 # Mimes using brightness for standout. Half bright is really dim unless
15318 # you turn up the brightness so far that lines show up on the screen.
15319 mime-fb|full bright mime1,
15320 is2=^S\E, rmso=^S, smso=^Y, use=mime,
15321 mime-hb|half bright mime1,
15322 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
15323 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
15324 # the more plausible ":do=^J:" -- esr)
15325 # uc was at one time disabled to get around a curses bug, be wary of it
15326 mime|mime1|mime2|mimei|mimeii|microterm mime1,
15328 cols#80, it#8, lines#24, vt#9,
15329 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
15330 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
15331 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
15332 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
15333 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
15334 # These termcaps (for mime2a) put the terminal in low intensity mode
15335 # since high intensity mode is so obnoxious.
15336 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
15339 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15340 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
15341 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
15342 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
15343 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
15344 smir=\EE, smso=\E\:, smul=\E6,
15345 # This is the preferred mode (but ^X can't be used as a kill character)
15346 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
15348 cols#80, it#8, lines#24,
15349 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15350 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
15351 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
15352 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
15353 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
15354 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
15355 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
15356 mime3a|mime1 emulating 3a,
15358 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
15359 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
15361 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
15363 # Wed Mar 9 18:53:21 1983
15364 # We run our terminals at 2400 baud, so there might be some timing problems at
15365 # higher speeds. The major improvements in this model are the terminal now
15366 # scrolls down and insert mode works without redrawing the rest of the line
15367 # to the right of the cursor. This is done with a bit of a kludge using the
15368 # exit graphics mode to get out of insert, but it does not appear to hurt
15369 # anything when using vi at least. If you have some users using act4s with
15370 # programs that use curses and graphics mode this could be a problem.
15371 mime314|mm314|mime 314,
15374 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
15375 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
15376 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
15377 # Microterm mime 340 from University of Wisconsin
15378 mm340|mime340|mime 340,
15380 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15381 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15382 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
15383 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
15384 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
15385 # This came from University of Wisconsin marked "astro termcap for jooss".
15386 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
15387 # also added <rmam>/<smam> based on the init string -- esr)
15388 mt4520-rv|micro-term 4520 reverse video,
15389 am, hs, msgr, xenl, xon,
15390 cols#80, it#8, lines#24, wsl#80,
15391 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
15392 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15393 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15394 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15395 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15396 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15397 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
15398 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15399 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
15400 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15401 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
15402 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
15403 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
15404 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
15405 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
15406 tbc=\E[g, tsl=\E[25;1H,
15408 # Fri Aug 5 08:11:57 1983
15409 # This entry works for the ergo 4000 with the following setups:
15410 # ansi,wraparound,newline disabled, xon/xoff disabled in both
15413 # WARNING!!! There are multiple versions of ERGO 4000 microcode
15414 # Be advised that very early versions DO NOT WORK RIGHT !!
15415 # Microterm does have a ROM exchange program- use it or lose big
15416 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
15417 ergo4000|microterm ergo 4000,
15420 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
15421 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15422 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
15423 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
15424 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
15425 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15426 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
15427 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
15428 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
15429 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
15434 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
15435 # For what happened to that group, see the ADDS section.
15437 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
15440 # The following vendor-supplied termcaps were captured from the Boundless
15441 # Technologies site, 8 March 1998. I removed all-upper-case names that were
15442 # identical, except for case, to lower-case ones. I also uncommented the acsc
15445 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15446 # DEC vt200/300 with color capabilities added.
15447 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15448 colors#8, pairs#64,
15449 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15451 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15452 # DEC vt200/300 with color capabilities added.
15453 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15454 colors#8, pairs#64,
15455 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15456 use=ncr260vt300wan,
15457 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15458 # DEC vt200/300 with color capabilities added.
15459 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
15460 colors#8, pairs#64,
15461 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15463 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
15464 # DEC vt200/300 with color capabilities added.
15465 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
15466 colors#8, pairs#64,
15467 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15468 use=ncr260vt300wpp,
15469 # This definition for ViewPoint supports several attributes. This means
15470 # that it has magic cookies (extra spaces where the attributes begin).
15471 # Some applications do not function well with magic cookies. The System
15472 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15473 # If supporting various attributes is not vital, 'xmc#1' and the extra
15474 # attributes can be removed.
15475 # Mapping to ASCII character set ('acsc' capability) can also be
15476 # restored if needed.
15477 ncr260vppp|NCR 2900_260 viewpoint,
15478 am, bw, hs, km, mc5i, mir, msgr, xon,
15479 cols#80, lines#24, nlab#32, xmc#1,
15480 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15481 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
15482 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
15483 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
15484 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
15485 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
15486 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
15487 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15488 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
15489 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
15490 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
15491 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
15492 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
15493 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
15494 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
15495 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
15496 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15497 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
15498 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
15499 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
15500 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
15501 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15502 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15503 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
15504 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
15505 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
15507 cup=\Ea%i%p1%dR%p2%dC$<30>,
15508 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15509 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15511 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
15512 am, hs, mir, msgr, xenl, xon,
15513 cols#80, lines#24, nlab#32,
15514 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15515 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15516 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15517 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
15518 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15519 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15520 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15521 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15522 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15523 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
15524 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
15525 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
15526 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
15528 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15529 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15530 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
15531 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
15532 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
15533 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
15534 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15536 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15537 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
15538 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
15539 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15540 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
15542 cup=\E[%i%p1%d;%p2%dH$<30>,
15543 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15544 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15546 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
15547 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15548 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15549 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15550 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
15551 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
15552 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15553 smkx=\E=, use=ncr260vt100an,
15554 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
15556 cup=\E[%i%p1%d;%p2%dH$<30>,
15557 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15558 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15560 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
15561 am, hs, mir, msgr, xenl, xon,
15562 cols#80, lines#24, nlab#32,
15563 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15564 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15565 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15566 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15567 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15568 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15569 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15570 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15571 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15572 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15573 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15574 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15575 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15576 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15577 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15578 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15579 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15580 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15581 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
15582 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
15583 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
15584 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15585 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15586 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15587 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15588 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15589 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15590 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15591 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15593 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15594 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15595 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15596 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15598 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15600 cup=\E[%i%p1%d;%p2%dH$<30>,
15601 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15602 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15604 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15605 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15606 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15607 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15608 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15610 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15612 cup=\E[%i%p1%d;%p2%dH$<30>,
15613 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15614 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15616 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15617 am, hs, mir, msgr, xenl, xon,
15618 cols#80, lines#24, nlab#32,
15619 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15620 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15621 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15622 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15623 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15624 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15625 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15626 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15627 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15628 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15629 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15630 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15631 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15632 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15633 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15634 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15635 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15636 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15637 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15638 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15639 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15640 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15641 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15642 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15643 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15644 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15645 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15647 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15649 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15650 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15651 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15652 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15654 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15656 cup=\E[%i%p1%d;%p2%dH$<30>,
15657 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15658 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15660 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15661 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15662 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15663 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15664 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15666 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15668 cup=\E[%i%p1%d;%p2%dH$<30>,
15669 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15670 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15672 # This terminfo file contains color capabilities for the Wyse325 emulation of
15673 # the NCR 2900/260C color terminal. Because of the structure of the command
15674 # (escape sequence) used to set color attributes, one of the fore/background
15675 # colors must be preset to a given value. I have set the background color to
15676 # black. The user can change this setup by altering the last section of the
15677 # 'setf' definition. The escape sequence to set color attributes is
15678 # ESC d y <foreground_color> <background_color> 1
15679 # In addition, the background color can be changed through the desk accessories.
15680 # The capablitiy 'op' sets colors to green on black (default combination).
15682 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15683 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15684 # capability and recompile if you wish to have it included.
15686 ncr260wy325pp|NCR 2900_260 wyse 325,
15687 am, bw, hs, km, mc5i, mir, msgr, xon,
15688 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15689 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15690 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15691 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15692 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15693 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15694 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15695 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15696 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15697 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15698 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15699 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15700 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15701 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15702 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15703 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15704 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15705 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15706 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15707 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15708 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15709 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15710 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15711 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15713 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15714 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15715 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15717 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15719 cup=\Ea%i%p1%dR%p2%dC$<30>,
15720 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15721 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15723 # This definition for Wyse 350 supports several attributes. This means
15724 # that it has magic cookies (extra spaces where the attributes begin).
15725 # Some applications do not function well with magic cookies. The System
15726 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15727 # If supporting various attributes is not vital, 'xmc#1' and the extra
15728 # attributes can be removed.
15729 # Mapping to ASCII character set ('acsc' capability) can also be
15730 # restored if needed.
15731 # In addition, color capabilities have been added to this file. The drawback,
15732 # however, is that the background color has to be black. The foreground colors
15733 # are numbered 0 through 15.
15735 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15736 # with the 'pairs' capability defined as below. If you wish to
15737 # have it included, Un-comment it and recompile (using 'tic').
15739 ncr260wy350pp|NCR 2900_260 wyse 350,
15740 am, bw, hs, km, mc5i, mir, msgr, xon,
15741 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15742 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15743 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15744 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15745 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15746 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15747 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15748 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15749 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15750 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15751 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15752 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15753 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15754 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15755 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15756 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15757 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15758 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15759 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15760 mc0=\EP$<10>, mc4=^T, mc5=^R,
15761 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15762 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15763 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15764 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15766 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15767 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15768 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15770 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15772 cup=\Ea%i%p1%dR%p2%dC$<30>,
15773 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15774 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15776 # This definition for Wyse 50+ supports several attributes. This means
15777 # that it has magic cookies (extra spaces where the attributes begin).
15778 # Some applications do not function well with magic cookies. The System
15779 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15780 # If supporting various attributes is not vital, 'xmc#1' and the extra
15781 # attributes can be removed.
15782 # Mapping to ASCII character set ('acsc' capability) can also be
15783 # restored if needed.
15784 # (ncr260wy50+pp: originally contained commented-out
15785 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15786 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15787 am, bw, hs, km, mc5i, mir, msgr, xon,
15788 cols#80, lines#24, nlab#32, xmc#1,
15789 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15790 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15791 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15792 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15793 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15794 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15795 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15797 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15798 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15799 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15800 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15801 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15802 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15803 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15804 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15805 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15806 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15807 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15808 mc0=\EP$<10>, mc4=^T, mc5=^R,
15809 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15810 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15811 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15812 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15813 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15814 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15815 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15817 cup=\Ea%i%p1%dR%p2%dC$<30>,
15818 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15819 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15821 ncr260wy60pp|NCR 2900_260 wyse 60,
15822 am, bw, hs, km, mc5i, mir, msgr, xon,
15823 cols#80, lines#24, nlab#32,
15824 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15825 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15826 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15827 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15828 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15829 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15830 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15832 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15833 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15834 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15835 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15836 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15837 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15838 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15839 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15840 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15841 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15842 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15843 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15844 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15845 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15846 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15847 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15848 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15849 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15851 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15853 cup=\Ea%i%p1%dR%p2%dC$<30>,
15854 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15855 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15857 ncr160vppp|NCR 2900_160 viewpoint,
15859 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15861 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15863 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15865 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15866 use=ncr260vt100wan,
15867 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15868 use=ncr260vt100wpp,
15869 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15871 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15873 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15874 use=ncr260vt200wan,
15875 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15876 use=ncr260vt200wpp,
15877 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15879 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15881 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15882 use=ncr260vt300wan,
15883 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15884 use=ncr260vt300wpp,
15885 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15887 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15888 use=ncr260wy50+wpp,
15889 ncr160wy60pp|NCR 2900_160 wyse 60,
15891 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15893 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15894 am, hs, mc5i, mir, msgr, xon,
15895 cols#80, it#8, lines#24, nlab#32,
15896 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15897 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15898 clear=\E[2J\E[1;1H$<300>, cr=^M,
15899 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15900 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15901 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15902 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15903 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15904 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15905 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15906 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15907 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15909 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15910 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15911 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15912 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15913 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15914 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15915 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15917 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15918 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15919 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15921 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15923 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15924 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15927 # Vendor-supplied NCR termcaps end here
15929 # NCR7900 DIP switches:
15933 # 5 - Parity (Odd/Even)
15934 # 6 - Don't Send or Do Send Spaces
15935 # 7 - Parity Enable
15936 # 8 - Stop Bits (One/Two)
15939 # 1 - Upper/Lower Shift
15940 # 2 - Typewriter Shift
15941 # 3 - Half Duplex / Full Duplex
15942 # 4 - Light/Dark Background
15943 # 5-6 - Carriage Return Without / With Line Feed
15944 # 7 - Extended Mode
15945 # 8 - Suppress Keyboard Display
15948 # 1 - End of line entry disabled/enabled
15949 # 2 - Conversational mode / (Local?) Mode
15950 # 3 - Control characters displayed / not displayed
15951 # 4 - (2-wire?) / 4-wire communications
15952 # 5 - RTS on and off for each character
15953 # 6 - (50Hz?) / 60 Hz
15954 # 7 - Exit after level zero diagnostics
15955 # 8 - RS-232 interface
15958 # 1 - Reverse Channel (yes / no)
15959 # 2 - Manual answer (no / yes)
15960 # 3-4 - Cursor appearance
15961 # 5 - Communication Rate
15962 # 6 - Enable / Disable EXT turnoff
15963 # 7 - Enable / Disable CR turnoff
15964 # 8 - Enable / Disable backspace
15966 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
15967 # reverse, blink, dim, and underline) the appropriate number of bits (by
15968 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
15969 # '@' is (effectively) "or"ed with each attribute to generate the proper third
15970 # character in the <ESC>0 sequence. The <sgr> string implements the following
15973 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
15974 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
15976 # Where: P1 <==> Standout attribute parameter
15977 # P2 <==> Underline attribute parameter
15978 # P3 <==> Reverse attribute parameter
15979 # P4 <==> Blink attribute parameter
15980 # P5 <==> Dim attribute parameter
15981 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
15982 ncr7900i|ncr7900|ncr 7900 model 1,
15984 cols#80, lines#24, xmc#1,
15985 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15986 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
15987 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
15988 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
15990 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
15991 sgr0=\E0@, smso=\E0Q, smul=\E0`,
15992 ncr7900iv|ncr 7900 model 4,
15995 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
15996 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
15997 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
15998 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
15999 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16000 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16001 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16002 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16003 # The user can enter a CTRL-B to get out of this locked state.
16004 # In <hpa>, we want to output the character given by the formula:
16005 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16006 ncr7901|ncr 7901 model,
16009 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16010 cub1=^H, cud1=^J, cuf1=^F,
16011 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16013 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16014 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16015 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16016 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16017 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16018 vpa=\013%p1%{64}%+%c,
16020 # Newbury Data Recording Limited (Newbury Data)
16022 # Have been manufacturing and reselling various peripherals for a long time
16023 # They don't make terminals anymore, but are still in business (in 2007).
16024 # Their e-mail address is at ndsales@newburydata.co.uk
16025 # and their post address is:
16027 # Newbury Data Recording Ltd,
16028 # Premier Park, Road One,
16029 # Winsford, Cheshire, CW7 3PT
16031 # Their technical support is still good, they sent me for free a printed copy
16032 # of the 9500 user manual and I got it just 1 week after I first contacted them
16036 # Manufactured in the early/mid eighties, behaves almost the same as a
16037 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16038 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16039 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16040 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16041 # recognized: if you type in "ESC !", the next (third) character is not
16042 # echoed, showing that the terminal was actually waiting for a parameter!
16043 ndr9500|nd9500|Newbury Data 9500,
16044 am, bw, hs, mc5i, mir, msgr, ul, xon,
16045 cols#80, lines#24, wsl#79,
16046 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16047 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16048 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16049 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16050 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16051 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16052 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16053 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16054 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16055 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16056 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16057 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16058 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16059 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16060 pfloc=\E|%{48}%p1%+%c2%p2\031,
16061 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16062 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16063 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16064 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16065 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16067 ndr9500-nl|NDR 9500 with no status line,
16070 dsl@, fsl@, tsl@, use=ndr9500,
16072 ndr9500-25|NDR 9500 with 25th line enabled,
16073 lines#25, use=ndr9500,
16075 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16076 lines#25, use=ndr9500-nl,
16078 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16081 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16082 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16083 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16085 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16086 lines#25, use=ndr9500-mc,
16088 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16091 dsl@, fsl@, tsl@, use=ndr9500-mc,
16093 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16094 lines#25, use=ndr9500-mc-nl,
16096 #### Perkin-Elmer (Owl)
16098 # These are official terminfo entries from within Perkin-Elmer.
16101 bantam|pe550|pe6100|perkin elmer 550,
16104 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16105 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16106 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16107 fox|pe1100|perkin elmer 1100,
16110 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16111 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16112 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16113 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16114 owl|pe1200|perkin elmer 1200,
16117 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16118 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16119 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16120 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16121 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16122 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16123 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16124 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16125 pe1251|pe6300|pe6312|perkin elmer 1251,
16127 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16128 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16129 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16130 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16131 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16132 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16133 # (pe7000m: this had
16134 # rmul=\E!\0, smul=\E!\040,
16135 # which is probably wrong, it collides with kf0
16136 pe7000m|perkin elmer 7000 series monochrome monitor,
16139 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16140 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16141 ed=\EJ, el=\EI, home=\EH, ind=^J,
16142 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16143 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16144 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16145 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16147 pe7000c|perkin elmer 7000 series colour monitor,
16148 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16149 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16153 # Sperry Univac has merged with Burroughs to form Unisys.
16156 # This entry is for the Sperry UTS30 terminal running the TTY
16157 # utility under control of CP/M Plus 1R1. The functionality
16158 # provided is comparable to the DEC vt100.
16159 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16160 uts30|sperry uts30 with cp/m@1R1,
16162 cols#80, lines#24, wsl#40,
16163 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16164 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
16165 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
16166 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16167 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16168 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
16169 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
16170 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
16171 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
16172 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
16173 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
16174 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
16175 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16176 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
16177 smul=\E[4m, tsl=\E], uc=\EPB,
16181 # Tandem builds these things for use with its line of fault-tolerant
16182 # transaction-processing computers. They aren't generally available
16183 # on the merchant market, and so are fairly uncommon.
16186 tandem6510|adm3a repackaged by Tandem,
16189 # A funny series of terminal that TANDEM uses. The actual model numbers
16190 # have a fourth digit after 653 that designates minor variants. These are
16191 # natively block-mode and rather ugly, but they have a character mode which
16192 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
16193 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
16194 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
16195 tandem653|t653x|Tandem 653x multipage terminal,
16196 OTbs, am, da, db, hs,
16197 cols#80, lines#24, wsl#64, xmc#1,
16198 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
16199 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
16200 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
16201 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
16203 #### Tandy/Radio Shack
16205 # Tandy has a line of VDTs distinct from its microcomputers.
16208 dmterm|deskmate terminal,
16211 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
16212 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16213 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
16214 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
16215 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
16216 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
16217 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
16218 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
16220 dt100|dt-100|Tandy DT-100 terminal,
16222 cols#80, lines#24, xmc#1,
16223 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16224 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16225 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16226 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16227 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16228 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
16229 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
16230 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
16231 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
16232 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
16233 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
16234 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
16235 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
16236 cols#132, use=dt100,
16237 dt110|Tandy DT-110 emulating ansi,
16240 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16241 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16242 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16243 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
16244 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
16245 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
16246 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
16247 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
16248 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
16249 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
16250 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
16251 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16252 smacs=^N, smso=\E[7m, smul=\E[4m,
16253 pt210|TRS-80 PT-210 printing terminal,
16256 bel=^G, cr=^M, cud1=^J, ind=^J,
16258 #### Tektronix (tek)
16260 # Tektronix tubes are graphics terminals. Most of them use modified
16261 # oscilloscope technology incorporating a long-persistence green phosphor,
16262 # and support vector graphics on a main screen with an attached "dialogue
16263 # area" for interactive text.
16266 tek|tek4012|tektronix 4012,
16269 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
16270 ff=\014$<1000>, is2=\E^O,
16271 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16272 tek4013|tektronix 4013,
16273 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
16274 tek4014|tektronix 4014,
16276 is2=\E\017\E9, use=tek4012,
16277 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16278 tek4015|tektronix 4015,
16279 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
16280 tek4014-sm|tektronix 4014 in small font,
16281 cols#121, lines#58,
16282 is2=\E\017\E\:, use=tek4014,
16283 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16284 tek4015-sm|tektronix 4015 in small font,
16285 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
16286 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
16288 # You need to have "stty nl2" in effect. Some versions of tset(1) know
16289 # how to set it for you.
16291 # It's got the Magic Cookie problem around stand-out mode. If you can't
16292 # live with Magic Cookie, remove the :so: and :se: fields and do without
16293 # reverse video. If you like reverse video stand-out mode but don't want
16294 # it to flash, change the letter 'H' to 'P' in the :so: field.
16295 tek4023|tektronix 4023,
16297 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
16298 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
16299 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
16300 rmso=^_@, smso=^_P,
16301 # It is recommended that you run the 4025 at 4800 baud or less;
16302 # various bugs in the terminal appear at 9600. It wedges at the
16303 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
16304 # on keyboard don't work. You have to hit BREAK twice to get
16305 # one break at any speed - this is a documented feature.
16306 # Can't use cursor motion because it's memory relative, and
16307 # because it only works in the workspace, not the monitor.
16308 # Same for home. Likewise, standout only works in the workspace.
16310 # <el> was commented out since vi and rogue seem to work better
16311 # simulating it with lots of spaces!
16313 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
16314 # and didn't seem necessary.
16316 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
16318 cols#80, it#8, lines#34, lm#0,
16319 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
16320 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
16321 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
16322 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
16323 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
16324 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
16325 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
16327 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16328 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
16329 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
16330 tek4025-17|tek 4025 17 line window,
16331 lines#17, use=tek4025,
16332 tek4025-17-ws|tek 4025 17 line window in workspace,
16333 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
16334 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
16335 smso=\037att e\r, use=tek4025-17,
16336 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
16337 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
16338 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16340 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
16341 # The following status modes are assumed for normal operation (replace the
16342 # initial "!" by whatever the current command character is):
16343 # !COM 29 # NOTE: changes command character to GS (^])
16349 # ^]STO 9 17 25 33 41 49 57 65 73
16350 # Other modes may be set according to communication requirements.
16351 # If the command character is inadvertently changed, termcap can't restore it.
16352 # Insert-character cannot be made to work on both top and bottom rows.
16353 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
16354 # There also seems to be a problem with vertical motion, perhaps involving
16355 # delete/insert-line, following a typed carriage return. This terminal sucks.
16356 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16357 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
16358 # work any more. -- esr)
16359 tek4025a|Tektronix 4025A,
16360 OTbs, OTpt, am, bw, da, db, xon,
16361 cols#80, it#8, lines#34,
16362 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
16363 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
16364 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
16365 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
16366 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
16367 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
16368 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
16369 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
16371 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
16372 # Here's the command file that I use to get rogue to work on the 4025.
16373 # It should work with any program using the old curses (e.g. it better
16374 # not try to scroll, or cursor addressing won't work. Also, you can't
16376 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
16377 tek4025-cr|tek 4025 for curses and rogue,
16379 cols#80, it#8, lines#33,
16380 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
16381 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
16382 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16383 rmcup=\037wor 0, smcup=\037wor 33h,
16384 # next two lines commented out since curses only allows 128 chars, sigh.
16385 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
16386 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
16387 tek4025ex|4025ex|4027ex|tek 4025 w/!,
16388 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
16389 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16390 tek4105|tektronix 4105,
16391 OTbs, am, mir, msgr, ul, xenl, xt,
16392 cols#79, it#8, lines#29,
16393 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
16394 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
16395 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
16396 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16397 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
16398 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
16399 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
16400 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
16401 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
16402 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16403 smul=\E[=5;<2m, tbc=\E[1g,
16405 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
16406 tek4105-30|4015 emulating 30 line vt100,
16407 am, mir, msgr, xenl, xon,
16408 cols#80, it#8, lines#30, vt#3,
16409 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16410 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16411 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16412 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16413 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16414 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16415 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
16416 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
16417 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16418 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16419 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16420 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16421 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
16422 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16423 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16426 # Tektronix 4105 from BRL
16427 # The following setup modes are assumed for normal operation:
16428 # CODE ansi CRLF no DABUFFER 141
16429 # DAENABLE yes DALINES 30 DAMODE replace
16430 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
16431 # FLAGGING input INSERTREPLACE replace LFCR no
16432 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
16433 # SELECTCHARSET G1 0 TABS -2
16434 # Other setup modes may be set for operator convenience or communication
16435 # requirements; I recommend
16436 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16437 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16438 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16439 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
16440 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16441 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
16443 # and factory color maps. After setting these modes, save them with NVSAVE. No
16444 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16445 # "IC" cannot be used in combination with "im" & "ei".
16446 # "tek4105a" is just a guess:
16447 tek4105a|Tektronix 4105,
16448 OTbs, OTpt, msgr, xon,
16449 OTkn#8, cols#80, it#8, lines#30, vt#3,
16450 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16451 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16452 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16453 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16454 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16455 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16456 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16457 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16458 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16459 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16460 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16461 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16462 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16463 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16464 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16465 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16466 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16467 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16470 # Tektronix 4106/4107/4109 from BRL
16471 # The following setup modes are assumed for normal operation:
16472 # CODE ansi COLUMNMODE 80 CRLF no
16473 # DABUFFER 141 DAENABLE yes DALINES 32
16474 # DAMODE replace DAVISIBILITY yes ECHO no
16475 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
16476 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
16477 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
16479 # Other setup modes may be set for operator convenience or communication
16480 # requirements; I recommend
16481 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16482 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16483 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16484 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
16485 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16486 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
16488 # and factory color maps. After setting these modes, save them with NVSAVE. No
16489 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16490 # "IC" cannot be used in combination with "im" & "ei".
16491 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
16493 cols#80, it#8, lines#32, vt#3,
16494 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16495 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16496 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16497 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16498 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16499 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16500 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16501 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16502 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16503 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16504 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16505 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16506 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16507 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16508 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16509 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16510 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16511 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
16513 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
16514 # 0 selects Tek mode, i.e., \E%!0
16515 # 1 selects ANSI mode
16516 # 2 selects ANSI edit-mode
16517 # 3 selects VT52 mode
16519 # One odd thing about the description (which has been unchanged since the 90s)
16520 # is that the cursor addressing is using VT52 mode, and a few others use the
16521 # VT52's non-CSI versions of ANSI, e.g., \EJ.
16522 tek4107|tek4109|tektronix terminals 4107 4109,
16523 OTbs, am, mir, msgr, ul, xenl, xt,
16524 cols#79, it#8, lines#29,
16525 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
16526 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
16527 cub1=^H, cud1=^J, cuf1=\EC,
16528 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
16529 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
16530 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16531 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
16532 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
16533 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
16534 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
16535 smul=\E%!1\E[4m$<2>\E%!0,
16536 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
16537 # see the note attached to tek4207.
16538 tek4207-s|Tektronix 4207 with sysline but no memory,
16540 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
16541 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16542 is2=\E7\E[?6l\E[2K\E[?6h\E8,
16543 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16545 # The 4110 series may be a wonderful graphics series, but they make the 4025
16546 # look good for screen editing. In the dialog area, you can't move the cursor
16547 # off the bottom line. Out of the dialog area, ^K moves it up, but there
16548 # is no way to scroll.
16550 # Note that there is a floppy for free from Tek that makes the
16551 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16552 # an expected enhancement that will use ANSI standard sequences.
16554 # 4112 in non-dialog area pretending to scroll. It really wraps
16555 # but vi is said to work (more or less) in this mode.
16557 # 'vi' works reasonably well with this entry.
16559 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
16562 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
16563 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
16564 # The 4112 with the ANSI compatibility enhancement
16565 tek4112|tek4114|tektronix 4110 series,
16568 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
16569 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
16570 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
16571 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
16572 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16573 tek4112-nd|4112 not in dialog area,
16575 cuu1=^K, use=tek4112,
16576 tek4112-5|4112 in 5 line dialog area,
16577 lines#5, use=tek4112,
16578 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
16579 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
16580 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
16581 # previously \0410 and \0411 sequences...I don't *think* they were supposed
16582 # to be 4-digit octal -- esr)
16583 tek4113|tektronix 4113 color graphics with 5 line dialog area,
16586 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
16587 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16588 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
16589 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
16591 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16592 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
16593 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16594 # :vb: needs enough delay to let you see the background color being toggled.
16595 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16597 cols#80, it#8, lines#34,
16598 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16600 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16601 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16602 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16603 # This entry is from Tek. Inc. (Brian Biehl)
16604 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16605 otek4115|Tektronix 4115,
16606 OTbs, am, da, db, eo,
16607 cols#80, it#8, lines#34,
16608 cbt=\E[Z, clear=\E[H\E[2J,
16609 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16610 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16611 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16612 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16614 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16615 kbs=^H, ri=\EM, rmam=\E[?7l,
16616 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16617 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16618 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16620 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16623 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16624 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16625 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16626 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16627 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16628 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16629 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16630 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16631 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16632 rmso=\E[m, rmul=\E[m,
16633 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
16634 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16635 vpa=\E[%p1%{1}%+%dd,
16636 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16637 # command is ignored. The following entry replaces <csr> with the needed
16638 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16639 # chokes on; and adds a lot of initialization for the tek dialog area.
16640 # Note that this entry uses all 34 lines and sets the cursor color to green.
16641 # Steve Jacobson 8/85
16642 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16643 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16644 tek4125|tektronix 4125,
16646 csr@, dl1=\E[1M, il1=\E[1L,
16647 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16648 rc@, sc@, smkx=\E=, use=vt100,
16650 # From: <jcoker@ucbic>
16651 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16652 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16653 # note that if jcoker wasn't confused you may be able to use this one.
16654 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16655 tek4207|Tektronix 4207 graphics terminal with memory,
16656 am, bw, mir, msgr, ul, xenl,
16657 cols#80, it#8, lines#32,
16658 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16659 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16660 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16661 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16662 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16663 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16664 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16665 rev=\E[7m, ri=\E[T,
16666 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16667 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16668 smul=\E[4m, tbc=\E[1g,
16670 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16671 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16672 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16673 tek4404|tektronix 4404,
16675 cols#80, it#8, lines#32,
16676 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16677 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16678 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16679 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16680 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16681 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16682 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16683 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16684 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16685 # Some unknown person wrote:
16686 # I added the is string - straight Unix has ESC ; in the login
16687 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16688 # mode). The is string here cleans up a few things (but not
16690 ct8500|tektronix ct8500,
16693 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16694 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16695 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16696 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16697 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16699 # Tektronix 4205 terminal.
16701 # am is not defined because the wrap around occurs not when the char.
16702 # is placed in the 80'th column, but when we are attempting to type
16703 # the 81'st character on the line. (esr: hmm, this is like the vt100
16704 # version of xenl, perhaps am + xenl would work!)
16706 # Bold, dim, and standout are simulated by colors and thus not allowed
16707 # with colors. The tektronix color table is mapped into the RGB color
16708 # table by setf/setb. All colors are reset to factory specifications by oc.
16709 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16710 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16711 # interval then maps into pre-defined value.
16712 tek4205|tektronix 4205,
16714 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16715 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16716 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16717 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16718 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16719 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16720 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
16721 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
16722 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
16723 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16724 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16725 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16726 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16728 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16729 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16730 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16731 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16732 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16733 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16734 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16735 smul=\E[4m, tbc=\E[1g,
16737 #### Teletype (tty)
16739 # These are the hardcopy Teletypes from before AT&T bought the company,
16740 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16741 # pulpy yellow roll paper. If you remember these you go back a ways.
16742 # Teletype-branded VDTs are listed in the AT&T section.
16744 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16745 # other programs still default to emitting codes for the Model 37.
16748 tty33|tty35|model 33 or 35 teletype,
16751 bel=^G, cr=^M, cud1=^J, ind=^J,
16752 tty37|model 37 teletype,
16754 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16757 # There are known to be at least three flavors of the tty40, all seem more
16758 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16759 # awful braindamage, such as printing a visible newline indicator after each
16760 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16761 # braindamaged but has hope and is described here. The 40-4 is a 3270
16762 # lookalike and beyond hope. The terminal has visible bell but I don't know
16763 # it - it's null here to prevent it from showing the BL character.
16764 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16765 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16766 # to get crlf, even if <cr> is not ^M.)
16767 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16768 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16771 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16772 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16773 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16774 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16775 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16776 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16777 tty43|model 43 teletype,
16778 OTbs, am, hc, os, xon,
16780 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16785 # You can add <is2=\E<> to put this 40-column mode, though I can't
16786 # for the life of me think why anyone would want to.
16787 scanset|sc410|sc415|Tymshare Scan Set,
16790 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16791 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16792 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16793 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16794 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16796 #### Volker-Craig (vc)
16798 # If you saw a Byte Magazine cover with a terminal on it during the early
16799 # 1980s, it was probably one of these. Carl Helmers liked them because
16800 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16801 # to program one...)
16804 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16805 # every other linefeed.
16806 vc303|vc103|vc203|volker-craig 303,
16809 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16810 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16811 kcuu1=^N, ll=\017$<1>W,
16812 vc303a|vc403a|volker-craig 303a,
16813 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16814 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16815 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16816 vc404|volker-craig 404,
16819 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16820 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16821 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16822 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16823 vc404-s|volker-craig 404 w/standout mode,
16824 cud1=^J, rmso=^O, smso=^N, use=vc404,
16825 # From: <wolfgang@cs.sfu.ca>
16826 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16827 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16830 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16831 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16832 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16833 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16834 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16835 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16836 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16837 rmso=\E^_, smso=\E^Y,
16838 vc415|volker-craig 415,
16839 clear=^L, use=vc404,
16841 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16844 #### IBM PC and clones
16847 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16848 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16849 # doesn't support scrolling regions, ignores add line commands, and ignores
16850 # delete line commands. Consequently, the resulting behavior looks like a
16851 # crude adm3a-type terminal.
16852 # Steve Jacobson 8/85
16853 pcplot|pc-plot terminal emulation program,
16855 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16856 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16857 # I've found that my KayPro II, running MDM730, continues to emulate an
16858 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16859 # system the following termcap entry works well:
16860 # I have noticed a couple of minor glitches, but nothing I can't work
16861 # around. (I added two capabilities from the BRL entry -- esr)
16862 kaypro|kaypro2|kaypro II,
16865 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16866 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16867 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16869 # From IBM, Thu May 5 19:35:27 1983
16870 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16871 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16874 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16875 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16877 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16878 OTbs, am, bw, eo, hs, km, msgr, ul,
16879 cols#80, it#8, lines#24,
16880 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16881 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16882 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16883 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16884 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16885 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16886 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16887 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16888 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16889 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16890 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16891 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16892 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16893 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
16894 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16898 # Apple II firmware console first, then various 80-column cards and
16899 # terminal emulators. For two cents I'd toss all these in the UFO file
16900 # along with the 40-column apple entries.
16903 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16904 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16905 # function of TIC, not the firmware.
16906 # The clear key on a IIgs will do something like clear-screen,
16907 # depending on what you're in.
16908 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16909 OTbs, am, bw, eo, msgr,
16910 cols#80, it#8, lines#24,
16911 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16912 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16913 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16914 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16916 # Apple //e with 80-column card, entry from BRL
16917 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16918 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16919 # Auto-wrap does not work right due to newline scrolling delay, which also
16920 # requires that you set "stty cr2".
16921 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16922 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16923 # using a terminal emulation program instead of the built-in firmware.
16927 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16928 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16929 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16930 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16932 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16933 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16934 apple2e-p|Apple //e via Pascal,
16935 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16936 kcud1=^J, use=apple2e,
16937 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16938 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16939 apple-ae|ASCII Express,
16940 OTbs, am, bw, msgr, nxon, xon,
16941 cols#80, it#8, lines#24,
16942 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16943 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16944 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16945 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16947 appleII|apple ii plus,
16949 cols#80, it#8, lines#24,
16950 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16951 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16952 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16953 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16955 # Originally by Gary Ford 21NOV83
16956 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16957 apple-80|apple II with smarterm 80 col,
16960 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
16961 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
16962 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
16963 apple-soroc|apple emulating soroc 120,
16966 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16967 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
16968 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16969 # From Peter Harrison, Computer Graphics Lab, San Francisco
16970 # ucbvax!ucsfmis!harrison .....uucp
16971 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
16972 # "These two work. If you don't have the inverse video chip for the
16973 # Apple with videx then remove the :so: and :se: fields."
16974 # (apple-videx: this used to be called DaleApple -- esr)
16975 apple-videx|Apple with videx videoterm 80 column board with inverse video,
16977 cols#80, it#8, lines#24,
16978 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
16979 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16980 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
16981 rmso=^Z2, sgr0=^Z2, smso=^Z3,
16982 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
16983 # Apple Cat ][ 212 modem, + more all
16984 # controlled by ASCII Express: Pro.
16985 # From Dave Shaver <isucs1!shaver>
16986 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
16989 acsc=, clear=^L, cuf1=^\,
16990 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16991 flash=^W35^W06, home=^Y,
16992 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
16994 apple-uterm|Ultraterm for Apple micros,
16997 acsc=, clear=^L, cuf1=^\,
16998 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16999 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17000 # from trwrba!bwong (Bradley W. Wong):
17002 # This entry assumes that you are using an apple with the UCSD Pascal
17003 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17004 # supplied with the standard apple except that screenwidth should be set
17005 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17006 # this termcap entry. This is because that key, on the Apple, transmits
17007 # a ^U and would thus preempt the more useful "up" function of vi.
17010 apple80p|80-column apple with Pascal card,
17013 clear=^Y^L, cuf1=^\\:,
17014 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17017 # Apple II+ equipped with Videx 80 column card
17019 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17020 # manually converted by D A Gwyn
17022 # DO NOT use any terminal emulation with this data base, it works directly
17023 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17025 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17026 # 1 screen, while in R2 ^U doesn't.
17027 # For inverse alternate character set add:
17028 # <smacs>=^O:<rmacs>=^N:
17029 # (apple-v: added it#8 -- esr)
17030 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17032 cols#80, it#8, lines#24,
17033 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17034 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17035 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17036 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17037 khome=^Y, rmso=^Z2, smso=^Z3,
17038 apple-videx3|vapple|Apple II with 80 col card,
17041 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17042 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17043 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17044 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17045 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17046 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17047 aepro|Apple II+ running ASCII Express Pro--vt52,
17050 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17051 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17053 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17054 apple-vm80|ap-vm80|apple with viewmax-80,
17057 clear=\014$<300/>, cuf1=^\\:,
17058 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17059 ed=\013$<300/>, el=^], home=\031$<200/>,
17061 #### Apple Lisa & Macintosh
17064 # (lisa: changed <cvvis> to <cnorm> -- esr)
17065 lisa|apple lisa console display (black on white),
17066 OTbs, am, eo, msgr,
17067 cols#88, it#8, lines#32,
17068 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17069 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17070 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17071 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17072 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17073 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17074 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17075 liswb|apple lisa console display (white on black),
17076 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17077 smso=\E[m, smul=\E[4m, use=lisa,
17079 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17080 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17082 # These entries assume that the 'Auto Wraparound' is enabled.
17083 # Xon-Xoff flow control should also be enabled.
17085 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17086 # settings are in non-volatile memory and don't need to be reset upon login.
17087 # Also setting the number of columns glitches the screen annoyingly.
17088 # You can type "reset" to get them set.
17090 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17091 OTbs, OTpt, am, xenl, xon,
17092 OTkn#4, cols#80, it#8, lines#24, vt#3,
17093 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17094 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17095 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17096 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17097 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17098 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17099 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17100 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17101 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17102 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17104 # Lisaterm in 132 column ("wide") mode.
17105 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17107 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17108 # Although MacTerminal has insert/delete line, it is commented out here
17109 # since it is much faster and cleaner to use the "lock scrolling region"
17110 # method of inserting and deleting lines due to the MacTerminal implementation.
17111 # Also, the "Insert/delete ch" strings have an extra character appended to them
17112 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17113 # supported by MacTerminal.
17114 mac|macintosh|Macintosh with MacTerminal,
17117 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17118 # Lisaterm in 132 column ("wide") mode.
17119 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17122 # nsterm*|Apple_Terminal - AppKit Terminal.app
17124 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
17125 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
17126 # Server and Mac OS X operating systems. There is also a
17127 # "terminal.app" in GNUStep, but I believe it to be an unrelated
17128 # codebase and I have not attempted to describe it here.
17130 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
17131 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
17132 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
17133 # version supports color.
17135 # To determine the version of Terminal.app you're using by running:
17137 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
17139 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
17141 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
17143 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
17145 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
17147 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
17148 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
17149 # might work too, but really you're on your own here since these
17150 # systems are very obsolete and I can't test them. I do welcome
17151 # patches, though :).
17155 # For GNUstep_Terminal, you're probably best off using "linux" or
17156 # writing your own terminfo.
17158 # For MacTelnet, you're on your own. It's a different codebase, and
17159 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
17161 # For iTerm.app, see "iterm".
17164 # The AppKit Terminal.app descriptions all have names beginning with
17165 # "nsterm". Note that the statusline (-s) versions use the window
17166 # titlebar as a phony status line, and may produce warnings during
17167 # compilation as a result ("tsl uses 0 parameters, expected 1".)
17168 # Ignore these warnings, or even ignore these entries entirely. Apps
17169 # which need to position the cursor or do other fancy stuff inside the
17170 # status line won't work with these entries. They're primarily useful
17171 # for programs like Pine which provide simple notifications in the
17172 # status line. Please note that non-ASCII characters don't work right
17173 # in the status line, since Terminal.app incorrectly interprets their
17174 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
17175 # versions) or only accepts status lines consisting entirely of
17176 # characters from the first 256 Unicode positions (including C1 but
17179 # The Mythology* of AppKit Terminal.app:
17181 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
17182 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
17183 # shareware replacement for Terminal called "Stuart" which NeXT bought
17184 # and used as the basis for the Terminal.app in NeXTstep 2+,
17185 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
17186 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
17187 # capabilities for the early versions, but I believe that the
17188 # TERM_PROGRAM_VERSION may have been reset at some point.
17190 # The early versions were tailored to the NeXT character set. Sometime
17191 # after the Apple aquisition the encoding was swiched to MacRoman
17192 # (initally with serious altcharset bugs due to incomplete conversion
17193 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
17194 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
17195 # 8-color support (initially buggy when combined with attributes, but
17196 # that was later fixed.) More recently, around Mac OS X version 10.3
17197 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
17198 # some versions (for instance 133-1 which shipped with Mac OS X
17199 # version 10.4) this suffered from the <bce> bug, but that seems to
17200 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
17202 # In the early days of Mac OS X the terminal was fairly buggy and
17203 # would routinely crash under load. Many of these bugs seem to have
17204 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
17205 # some may still remain. This change seems to correspond to
17206 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
17207 # it did previously.
17209 # * This may correspond with what actually happened, but I don't
17210 # know. It is based on guesswork, hearsay, private correspondence,
17211 # my faulty memory, and the following online sources and references:
17213 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
17214 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
17216 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
17217 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
17219 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
17220 # "nsterm" to comply with the name length and case conventions and
17221 # limitations of various software packages [notably Solaris terminfo
17222 # and UNIX.] A single Apple_Terminal alias is retained for
17223 # backwards-compatbility.
17225 # * Added function key support (F1-F4). These only work in Terminal.app
17226 # version 51, hopefully the capabilities won't cause problems for people
17227 # using version 41.
17229 # * Added "full color" (-c) entries which support the 16-color mode in
17232 # * By default, version 51 uses UTF-8 encoding with broken altcharset
17233 # support, so "ASCII" (-7) entries without altcharset support were
17236 # nsterm - AppKit Terminal.app
17238 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
17239 # Terminal.app. It is a partial VT100 emulation with some xterm-like
17240 # extensions. This terminfo was written to describe versions 41
17241 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
17242 # version 10.1) of Terminal.app.
17244 # Terminal.app runs under the Mac OS X Quartz windowing system (and
17245 # other AppKit-supported windowing systems.) On the Mac OS X machine I
17246 # use, the executable for Terminal.app is:
17247 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
17249 # If you're looking for a description of the full-screen system
17250 # console which runs under Apple's Darwin operating system on PowerPC
17251 # platforms, see the "xnuppc" entry instead.
17253 # There were no function keys in version 41. In version 51, there are
17254 # four working function keys (F1, F2, F3 and F4.) The function keys
17255 # are included in all of these entries.
17257 # It does not support mouse pointer position reporting. Under some
17258 # circumstances the cursor can be positioned using option-click; this
17259 # works by comparing the cursor position and the selected position,
17260 # and simulating enough cursor-key presses to move the cursor to the
17261 # selected position. This technique fails in all but the simplest
17264 # It provides partial ANSI color support (background colors interacted
17265 # badly with bold in version 41, though, as reflected in :ncv:.) The
17266 # monochrome (-m) entries are useful if you've disabled color support
17267 # or use a monochrome monitor. The full color (-c) entries are useful
17268 # in version 51, which doesn't exhibit the background color bug. They
17269 # also enable an xterm-compatible 16-color mode.
17271 # The configurable titlebar is set using xterm-compatible sequences;
17272 # it is used as a status bar in the statusline (-s) entries. Its width
17273 # depends on font sizes and window sizes, but 50 characters seems to
17274 # be the default for an 80x24 window.
17276 # The MacRoman character encoding is used for some of the alternate
17277 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
17278 # disable alternate character set support entirely, and the "VT100"
17279 # (-acs) entries rely instead on Terminal.app's own buggy VT100
17280 # graphics emulation, which seems to think the character encoding is
17281 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
17282 # are useful in Terminal.app version 51, which supports UTF-8 and
17283 # other ASCII-compatible character encodings but does not correctly
17284 # implement VT100 graphics; once VT100 graphics are correctly
17285 # implemented in Terminal.app, the "VT100" (-acs) entries should be
17286 # usable in any ASCII-compatible character encoding [except perhaps
17287 # in UTF-8, where some experts argue for disallowing alternate
17288 # characters entirely.]
17290 # Terminal.app reports "vt100" as the terminal type, but exports
17291 # several environment variables which may aid detection in a shell
17292 # profile (i.e. .profile or .login):
17295 # TERM_PROGRAM=Apple_Terminal
17296 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
17297 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
17299 # For example, the following Bourne shell script would detect the
17300 # correct terminal type:
17302 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
17305 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
17307 # TERM="nsterm-old"
17309 # TERM="nsterm-c-7"
17313 # In a C shell derivative, this would be accomplished by:
17315 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
17316 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
17317 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
17318 # setenv TERM "nsterm-old"
17320 # setenv TERM "nsterm-c-7"
17325 # The '+' entries are building blocks
17326 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
17327 am, bw, msgr, xenl, xon,
17328 cols#80, it#8, lines#24,
17329 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
17330 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17331 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17332 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17333 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
17334 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
17335 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
17336 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
17337 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17338 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17339 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
17340 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17341 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
17343 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
17344 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17345 enacs=\E(B\E)0, rmacs=^O,
17346 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17347 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17349 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
17350 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
17351 enacs=\E(B\E)0, rmacs=^O,
17352 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17353 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17355 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
17358 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
17360 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
17361 op=\E[0m, use=ibm+16color,
17363 nsterm+c41|AppKit Terminal.app v41 color support,
17364 colors#8, ncv#37, pairs#64,
17365 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17367 # These are different combinations of the building blocks
17369 # ASCII charset (-7)
17370 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
17373 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
17374 use=nsterm+s, use=nsterm+7,
17376 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
17377 use=nsterm+c41, use=nsterm+7,
17379 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
17380 use=nsterm+c, use=nsterm+7,
17382 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
17383 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
17385 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
17386 use=nsterm+s, use=nsterm+c, use=nsterm+7,
17388 # VT100 alternate-charset (-acs)
17389 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
17392 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
17393 use=nsterm+s, use=nsterm+acs,
17395 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
17396 use=nsterm+c41, use=nsterm+acs,
17398 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
17399 use=nsterm+c, use=nsterm+acs,
17401 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
17402 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
17404 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
17405 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
17408 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
17411 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
17412 use=nsterm+s, use=nsterm+mac,
17414 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
17415 use=nsterm+c41, use=nsterm+mac,
17417 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
17418 use=nsterm+c, use=nsterm+mac,
17420 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
17421 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
17423 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
17424 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
17426 # In Mac OS X version 10.5 the format of the preferences has changed
17427 # and a new, more complex technique is needed, e.g.,
17429 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
17430 # "NSUserDefaults");ud=NSUserDefaults.alloc();
17431 # ud.init();prefs=ud.persistentDomainForName_(
17432 # "com.apple.Terminal");prefs["Window Settings"][
17433 # prefs["Default Window Settings"]]["TerminalType"
17434 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
17435 # "com.apple.Terminal")' nsterm-16color
17437 # and it is still not settable from the preferences dialog. This is
17438 # tracked under rdar://problem/7365108 and rdar://problem/7365134
17439 # in Apple's bug reporter.
17440 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
17442 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
17443 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
17444 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
17445 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17446 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17447 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
17448 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
17449 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
17450 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
17451 use=nsterm-c-s-acs,
17453 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
17454 # the background color erase bug. The newer version 240.2 in Mac OS X
17455 # version 10.5 does not.
17457 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
17458 # and D P Schreber comparing to nsterm-c-s-acs.
17460 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
17461 # can be set in Terminal.app, e.g.,
17463 # defaults write com.apple.Terminal TermCapString nsterm-bce
17465 # and that it is not set in Terminal's preferences dialog.
17466 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
17467 bce, bw, use=nsterm-16color,
17469 # This is an alias which should always point to the "current" version
17470 nsterm|Apple_Terminal|AppKit Terminal.app,
17471 use=nsterm-16color,
17473 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
17474 # more featureful) terminal emulator for Mac OS X. It is similar
17475 # enough in capabilities to nsterm-16color that I have derived this
17476 # description from that one, but as far as I know they share no code.
17477 # Many of the features are user-configurable, but I attempt only to
17478 # describe the default configuration.
17480 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
17482 iTerm.app|iTerm.app terminal emulator for Mac OS X,
17484 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17485 use=nsterm-16color,
17487 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
17489 # On PowerPC platforms, Apple's Darwin operating system uses a
17490 # full-screen system console derived from a NetBSD framebuffer
17491 # console. It is an ANSI-style terminal, and is not really VT-100
17494 # Under Mac OS X, this is the system console driver used while in
17495 # single-user mode [reachable by holding down Command-S during the
17496 # boot process] and when logged in using console mode [reachable by
17497 # typing ">console" at the graphical login prompt.]
17499 # If you're looking for a description of the Terminal.app terminal
17500 # emulator which runs under the Mac OS X Quartz windowing system (and
17501 # other AppKit-supported windowing systems,) see the "nsterm"
17504 # NOTE: Under Mac OS X version 10.1, the default login window does not
17505 # prompt for user name, instead requiring an icon to be selected from
17506 # a list of known users. Since the special ">console" login is not in
17507 # this list, you must make one of two changes in the Login Window
17508 # panel of the Login section of System Prefs to make the special
17509 # ">console" login accessible. The first option is to enable 'Show
17510 # "Other User" in list for network users', which will add a special
17511 # "Other..." icon to the graphical login panel. Selecting "Other..."
17512 # will present the regular graphical login prompt. The second option
17513 # is to change the 'Display Login Window as:' setting to 'Name and
17514 # password entry fields', which replaces the login panel with a
17515 # graphical login prompt.
17517 # There are no function keys, at least not in Darwin 1.3.
17519 # It has no mouse support.
17521 # It has full ANSI color support, and color combines correctly with
17522 # all three supported attributes: bold, inverse-video and underline.
17523 # However, bold colored text is almost unreadable (bolding is
17524 # accomplished using shifting and or-ing, and looks smeared) so bold
17525 # has been excluded from the list of color-compatible attributes
17526 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17527 # monochrome monitor.
17529 # There is one serious bug with this terminal emulation's color
17530 # support: repositioning the cursor onto a cell with non-matching
17531 # colors obliterates that cell's contents, replacing it with a blank
17532 # and displaying a colored cursor in the "current" colors. There is
17533 # no complete workaround at present [other than using the monochrome
17534 # (-m) entries,] but removing the (msgr) capability seemed to help.
17536 # The "standout" chosen was simple reverse-video, although a colorful
17537 # standout might be more aesthetically pleasing. Similarly, the bold
17538 # chosen is the terminal's own smeared bold, although a simple
17539 # color-change might be more readable. The color-bold (-b) entries
17540 # uses magenta colored text for bolding instead. The fancy color (-f
17541 # and -f2) entries use color for bold, standout and underlined text
17542 # (underlined text is still underlined, though.)
17544 # Apparently the terminal emulator does support a VT-100-style
17545 # alternate character set, but all the alternate character set
17546 # positions have been left blank in the font. For this reason, no
17547 # alternate character set capabilities have been included in this
17548 # description. The console driver appears to be ASCII-only, so (enacs)
17549 # has been excluded [although the VT-100 sequence does work.]
17551 # The default Mac OS X and Darwin installation reports "vt100" as the
17552 # terminal type, and exports no helpful environment variables. To fix
17553 # this, change the "console" entry in /etc/ttys from "vt100" to
17554 # "xnuppc-WxH", where W and H are the character dimensions of your
17555 # console (see below.)
17557 # The font used by the terminal emulator is apparently one originally
17558 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
17559 # file includes descriptions for the following geometries:
17561 # Pixels Characters Entry Name (append -m for monochrome)
17562 # -------------------------------------------------------------------
17563 # 640x400 80x25 xnuppc-80x25
17564 # 640x480 80x30 xnuppc-80x30
17565 # 720x480 90x30 xnuppc-90x30
17566 # 800x600 100x37 xnuppc-100x37
17567 # 896x600 112x37 xnuppc-112x37
17568 # 1024x640 128x40 xnuppc-128x40
17569 # 1024x768 128x48 xnuppc-128x48
17570 # 1152x768 144x48 xnuppc-144x48
17571 # 1280x1024 160x64 xnuppc-160x64
17572 # 1600x1024 200x64 xnuppc-200x64
17573 # 1600x1200 200x75 xnuppc-200x75
17574 # 2048x1536 256x96 xnuppc-256x96
17576 # The basic "xnuppc" entry includes no size information, and the
17577 # emulator includes no reporting capability, so you'll be at the mercy
17578 # of the TTY device (which reports incorrectly on my hardware.) The
17579 # color-bold entries do not include size information.
17581 # The '+' entries are building blocks
17582 xnuppc+basic|Darwin PowerPC Console basic capabilities,
17583 am, bce, mir, xenl,
17585 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17586 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17587 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17588 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
17589 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
17590 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17591 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
17592 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17594 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17595 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17596 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17598 xnuppc+c|Darwin PowerPC Console ANSI color support,
17599 colors#8, ncv#32, pairs#64,
17600 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17602 xnuppc+b|Darwin PowerPC Console color-bold support,
17605 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17608 xnuppc+f|Darwin PowerPC Console fancy color support,
17610 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
17611 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17613 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
17616 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
17617 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17619 # Building blocks for specific screen sizes
17620 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
17623 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
17626 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
17629 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
17630 cols#100, lines#37,
17632 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
17633 cols#112, lines#37,
17635 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
17636 cols#128, lines#40,
17638 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
17639 cols#128, lines#48,
17641 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
17642 cols#144, lines#48,
17644 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
17645 cols#160, lines#64,
17647 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
17648 cols#200, lines#64,
17650 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
17651 cols#200, lines#75,
17653 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
17654 cols#256, lines#96,
17656 # These are different combinations of the building blocks
17658 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
17661 xnuppc|darwin|Darwin PowerPC Console (color),
17662 use=xnuppc+c, use=xnuppc+basic,
17664 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
17667 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
17668 use=xnuppc+b, use=xnuppc+c,
17670 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
17673 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
17674 use=xnuppc+f, use=xnuppc+c,
17676 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
17679 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
17680 use=xnuppc+f2, use=xnuppc+c,
17682 # Combinations for specific screen sizes
17683 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
17684 use=xnuppc+80x25, use=xnuppc+basic,
17686 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
17687 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17689 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
17690 use=xnuppc+80x30, use=xnuppc+basic,
17692 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
17693 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17695 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
17696 use=xnuppc+90x30, use=xnuppc+basic,
17698 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
17699 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17701 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
17702 use=xnuppc+100x37, use=xnuppc+basic,
17704 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
17705 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17707 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
17708 use=xnuppc+112x37, use=xnuppc+basic,
17710 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
17711 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17713 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
17714 use=xnuppc+128x40, use=xnuppc+basic,
17716 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
17717 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17719 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
17720 use=xnuppc+128x48, use=xnuppc+basic,
17722 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
17723 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17725 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
17726 use=xnuppc+144x48, use=xnuppc+basic,
17728 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17729 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17731 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17732 use=xnuppc+160x64, use=xnuppc+basic,
17734 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17735 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17737 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17738 use=xnuppc+200x64, use=xnuppc+basic,
17740 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17741 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17743 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17744 use=xnuppc+200x75, use=xnuppc+basic,
17746 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17747 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17749 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17750 use=xnuppc+256x96, use=xnuppc+basic,
17752 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17753 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17755 #### Radio Shack/Tandy
17758 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17759 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17760 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17761 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17763 cols#80, it#8, lines#24,
17764 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17765 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17766 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17767 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17768 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17769 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17770 # (trs2: removed obsolete ":nl=^_:" -- esr)
17771 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17773 cols#80, it#8, lines#24,
17774 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17775 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17776 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17777 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17778 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17779 # (This had extension capabilities
17780 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17781 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17782 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17783 trs16|trs-80 model 16 console,
17785 cols#80, it#8, lines#24,
17786 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17787 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17788 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17789 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17790 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17791 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17792 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17793 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17794 smacs=\ERG, smso=\ERD,
17796 #### Commodore Business Machines
17798 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17799 # after years of shaky engineering and egregious mismanagement. Made one
17800 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17801 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17802 # ever (most units sold); they can still be found gathering dust in closets
17806 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17807 # Added a few more entries, converted caret-type control sequence (^x) entries
17808 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17809 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17811 # :as:, :ae: Support for alternate character sets.
17812 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17813 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17814 # This one appears to fix a problem I always had with a line ending
17815 # at 'width+1' (I think) followed by a blank line in vi. The blank
17816 # line tended to disappear and reappear depending on how the screen
17817 # was refreshed. Note that this is probably needed only if you use
17818 # something like a Dnet Fterm with the window sized to some peculiar
17819 # dimension larger than 80 columns.
17820 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17821 # (amiga: removed obsolete :kn#10:,
17822 # also added empty <acsc> to suppress a warning --esr)
17824 OTbs, am, bw, xenl,
17826 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17827 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17828 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17829 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17830 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17831 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17832 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17833 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17834 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17835 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17836 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17837 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17838 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17840 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17841 # (amiga: added empty <acsc> to suppress a warning.
17842 # I'm told this entry screws up badly with AS225, the Amiga
17843 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17844 amiga-h|Hans Verkuil's Amiga ANSI,
17847 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17848 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17849 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17850 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17851 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17852 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17853 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17854 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17855 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17856 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17857 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17858 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17859 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17860 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17861 smso=\2337m, smul=\2334m,
17863 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17865 # Pavel Fedin added
17870 amiga-8bit|Amiga ANSI using 8-bit controls,
17871 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17872 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17873 kpp=\233T, ri=\215, rin@, use=amiga-h,
17875 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17876 # requires use of appropriate preferences settings.
17877 amiga-vnc|Amiga using VNC console (black on light gray),
17878 am, da, db, msgr, ndscr,
17879 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17880 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17881 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17882 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17883 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17884 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17885 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17886 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17887 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17888 indn=\E[%p1%dS, invis=\E8m,
17889 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17890 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17891 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17892 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17893 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17894 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17895 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17896 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17897 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17898 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17899 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17900 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17901 smso=\E[1m, smul=\E[4m,
17903 # MorphOS on Genesi Pegasos
17904 # By Pavel Fedin <sonic_amiga@rambler.ru>
17906 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17907 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17908 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17909 ri=\215, rin@, use=amiga-h,
17911 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17912 # I'm trying to write a termcap for a commodore b-128, and I'm
17913 # having a little trouble. I've had to map most of my control characters
17914 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17915 # and create some functions (like cm), but thats life.
17916 # The problem is with the arrow keys - right, and up work fine, but
17917 # left deletes the previous character and down I just can't figure out.
17918 # Jove knows what I want, but I don't know what it's sending to me (it
17919 # isn't thats bound to next-line in jove).
17920 # Anybody got any ideas? Here's my termcap.
17921 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17923 commodore|b-128|Commodore B-128 micro,
17925 OTdN#20, cols#80, lines#24, pb#150,
17926 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17927 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17928 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17929 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17930 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17935 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17936 northstar|North Star Advantage,
17940 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17941 el=\016$<200/>, home=\034\032$<200/>,
17945 # Thu Jul 7 03:55:16 1983
17947 # As an aside, be careful; it may sound like an anomaly on the
17948 # Osborne, but with the 80-column upgrade, it's too easy to
17949 # enter lines >80 columns!
17951 # I've already had several comments...
17952 # The Osborne-1 with the 80-col option is capable of being
17953 # 52, 80, or 104 characters wide; default to 80 for compatibility
17954 # with most systems.
17956 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17957 osborne-w|osborne1-w|osborne I in 104-column mode,
17959 cols#104, lines#24,
17960 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17961 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17962 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
17963 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
17964 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
17965 osborne|osborne1|osborne I in 80-column mode,
17966 OTbs, am, mir, msgr, ul, xhp,
17967 OTdB#4, cols#80, lines#24,
17968 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
17969 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17970 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
17971 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
17972 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
17974 # Osborne Executive definition from BRL
17975 # Similar to tvi920
17976 # Added by David Milligan and Tom Smith (SMU)
17977 osexec|Osborne executive,
17979 OTug#1, cols#80, lines#24, xmc#1,
17980 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17981 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17982 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
17983 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
17984 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
17985 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
17986 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
17989 #### Console types for obsolete UNIX clones
17991 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
17992 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
17993 # were commercial, Minix an educational tool sold in conjunction with a book.
17994 # Memory-segmentation limits and a strong tendency to look like V7 long after
17995 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
17996 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
17997 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
17998 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
17999 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18000 # even as single processes under SunOS and the Macintosh OS.
18004 # http://www.minix3.org/manpages/man4/console.4.html
18005 minix|minix console (v3),
18006 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18007 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18008 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18009 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18010 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18011 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18012 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18013 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18014 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18015 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18016 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18017 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18018 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18019 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18022 minix-3.0|minix console (v3.0),
18023 use=ecma+color, use=minix-1.7,
18026 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18027 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18028 minix-1.7|minix console (v1.7),
18030 cols#80, it#8, lines#25,
18031 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18032 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18033 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18034 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18035 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18036 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18037 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18038 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18039 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18040 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18041 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18042 smso=\E[7m, smul=\E[4m,
18043 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18044 minix-old|minix-1.5|minix console (v1.5),
18046 cols#80, it#8, lines#25,
18047 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18048 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18049 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18050 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18051 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18052 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18053 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18054 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18055 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18056 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18057 # The linewrap option can be specified by editing /usr/include/minix/config.h
18058 # before recompiling the minix 1.5 kernel.
18059 minix-old-am|minix console with linewrap,
18062 pc-minix|minix console on an Intel box,
18063 use=klone+acs, use=minix-3.0,
18065 # According to the Coherent 2.3 manual, the PC console is similar
18066 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18067 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18068 # has blinking and bold.
18069 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18071 cols#80, it#8, lines#25,
18072 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18073 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18074 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18075 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18076 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18078 # According to the Venix 1.1 manual, the PC console is similar
18079 # to a DEC vt52. Differences seem to be (1) arrow keys send
18080 # different strings, (2) enhanced standout, (3) added insert/delete line.
18081 # Note in particular that it doesn't have automatic margins.
18082 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18083 # not described here because this derives from an old termcap entry.
18084 pc-venix|venix|IBM PC console running Venix,
18085 cols#80, it#8, lines#25,
18086 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18087 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18088 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18089 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18091 #### Miscellaneous microcomputer consoles
18093 # If you know anything more about any of these, please tell me.
18096 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18097 # It may be used as a terminal by putting it in "line" mode as seen on
18098 # one of the status lines.
18099 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18100 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18101 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18102 # used \ED instead.
18103 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18104 mai|basic4|MAI Basic Four in ansi mode,
18105 am, da, db, mir, msgr,
18106 cols#82, it#8, lines#25,
18107 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18108 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18109 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18110 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18111 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18112 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18113 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18114 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18115 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18116 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18117 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18118 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18119 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18121 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18122 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18123 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18124 # about 1,5 km from where I live, but doesn't build own computers any
18125 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18126 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18127 # video output for a TV set or a dedicated monitor and several slots for
18128 # Apple II cards. Basis 108 were quite popular at german schools before
18129 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18130 # development system (which I used even in 1993 to program the steering
18131 # and data recording for our school's experimental solar panel :), Apple DOS
18133 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18134 basis|BASIS108 computer with terminal translation table active,
18135 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18136 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18137 smso=\E(, use=adm3a,
18138 # luna's BMC terminal emulator
18139 luna|luna68k|LUNA68K Bitmap console,
18140 cols#88, lines#46, use=ansi-mini,
18141 megatek|pegasus workstation terminal emulator,
18144 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18145 # interface (pre-Macintosh by several years) that went nowhere.
18146 xerox820|x820|Xerox 820,
18149 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18150 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18153 #### Videotex and teletext
18156 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18157 # \E[?3l 80 columns
18158 # \E[?4l scrolling on
18159 # \E[12h local echo off
18160 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18161 # \E)0 G1 DEC set (line graphics)
18163 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18164 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18165 OTbs, eslok, hs, xenl,
18166 cols#80, it#8, lines#24, wsl#72, xmc#0,
18167 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18168 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18169 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18170 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18171 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18172 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18173 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18174 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18175 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18176 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18177 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18178 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18179 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18180 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18181 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18182 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18183 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18184 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18185 u6=\E[%i%d;%dR, u7=\E[6n,
18187 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18189 minitel1|minitel 1,
18190 am, bw, eslok, hs, hz, msgr,
18191 colors#8, cols#40, lines#24, pairs#8,
18192 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18193 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18194 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18195 enacs=^Y, fsl=^J, home=^^, ind=^J,
18196 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18197 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18198 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18199 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18200 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18201 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18202 minitel1b|minitel 1-bistandard (in 40cols mode),
18204 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18205 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18206 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18207 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18208 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18209 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18210 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18211 # <rmkx> posait des problemes (logout en sortant de vi).
18212 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18214 colors@, cols#80, it#8, pairs@,
18215 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18216 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18217 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18218 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18219 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18220 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18221 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18222 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18223 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18225 ######## OBSOLETE VDT TYPES
18227 # These terminals are *long* dead -- these entries are retained for
18228 # historical interest only.
18230 #### Amtek Business Machines
18233 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18234 # but these caps were commented out in 8.3; also, removed overridden
18235 # ":do=^J:" -- esr)
18236 abm80|amtek business machines 80,
18239 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18240 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18241 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18243 #### Bell Labs blit terminals
18245 # These were AT&T's official entries. The 5620 FAQ maintained by
18246 # David Breneman <daveb@dgtl.com> has this to say:
18248 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18249 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18250 # was good. But lo, upon the horizon loomed a mighty management-type person
18251 # (known now only by the initials VP) who said, the mighty Jerq must stay
18252 # alone, and could not go forth into the world. So Locanthi and Pike put the
18253 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18254 # world. And the Jerq lived the rest of its days in research, but never
18255 # strayed from those paths.
18257 # In all seriousness, the Blit was originally known as the Jerq, but when
18258 # it started to be shown outside of the halls of the Bell Labs Research
18259 # organization, the management powers that be decided that the name could
18260 # not remain. So it was renamed to be Blit. This was in late 1981.
18262 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18266 blit|jerq|blit running teletype rom,
18268 cols#87, it#8, lines#72,
18269 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18270 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18271 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18272 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18273 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18274 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18276 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18277 cbblit|fixterm|blit running columbus code,
18279 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18280 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18281 smul=\EU", use=blit,
18283 oblit|ojerq|first version of blit rom,
18284 am, da, db, eo, mir, ul, xon,
18285 cols#88, it#8, lines#72,
18286 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18287 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18288 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18289 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18292 #### Bolt, Beranek & Newman (bbn)
18294 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18295 # The parent company, best known as the architects of the Internet, is
18298 # Jeff DelPapa <dp@world.std.com> writes:
18299 # The bitgraph was a large white box that contained a monochrome bitmap
18300 # display, and a 68000 to run it. You could download code and run it on
18301 # the cpu, it had 128kb (I think) of memory. I used one in the late
18302 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18303 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18304 # rate, and looked like a rubber sheet stretching, then snapping
18305 # upwards. It had everything the early mac had, except a floppy drive a
18306 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18307 # Beranek and Neuman) sold at most a few hundred of them to the real
18308 # world. DOD may have bought more...
18311 # Entries for the BitGraph terminals. The problem
18312 # with scrolling in vi can only be fixed by getting BBN to put
18313 # smarter scroll logic in the terminal or changing vi or padding
18314 # scrolls with about 500 ms delay.
18316 # I always thought the problem was related to the terminal
18317 # counting newlines in its input buffer before scrolling and
18318 # then moving the screen that much. Then vi comes along and
18319 # paints lines in on the bottom line of the screen, so you get
18320 # this big white gap.
18322 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18323 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18325 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18326 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18328 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18331 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18332 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18333 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18334 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18335 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18336 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18337 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18338 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18340 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18341 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18343 bg1.25nv|bbn bitgraph 1.25 (normal video),
18344 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18346 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18347 bg1.25|bbn bitgraph 1.25,
18349 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18350 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18351 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18352 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18353 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18354 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18355 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18358 #### Bull (bq, dku, vip)
18360 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18362 #============================================#
18363 # BULL QUESTAR 210 `SDP' terminals emulation #
18364 #============================================#
18366 # Description written by R.K.Saunders (Bull Transac)
18368 # Modifications written by F. Girard (Bull MTS)
18369 # 19-05-87 V02.00.01
18370 # 17-12-87 V02.00.02
18371 # 15-09-89 V02.00.05
18373 # Typical technical selections F1 (modes SDP/ROLL):
18374 # -------------------------------------------------------
18375 # | 01 02 03 04 05 06 07 08 09 10 |
18376 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18378 # | 11 12 13 14 15 16 17 18 19 20 |
18379 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18381 # | 21 22 23 24 25 26 27 28 29 30 |
18382 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18384 # | 31 32 33 34 35 36 37 38 39 40 |
18385 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18386 # -------------------------------------------------------
18387 # Typical firmware identification F5 "etat 6":
18388 # P287.02.04b (AZERTY)
18389 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18390 # P298.03.03 (monochrome) or P374.03.02 (colour)
18392 # SM SDP mode (VIP command): ^[[?=h
18393 # RIS (erases screen): ^[c
18394 # DMI disable keyboard: ^[`
18395 # SM double rendition mode: ^[[?>h
18396 # RM solicited status mode: ^[[5l
18397 # RM character mode: ^[[>l
18398 # RM echoplex mode: ^[[12l
18399 # RM column tab mode: ^[[18l
18400 # RM forbid SS2 keyboard mode: ^[[?<l
18401 # SM scroll mode: ^[[=h
18402 # FCF enable XON/XOFF: ^[P1s^[\
18403 # MTL select end msg character: ^[[^Wp
18404 # EMI enable keyboard: ^[b
18405 # RIS retour etat initial: ^[c
18406 # enable FC keypad: ^[[?<h,
18407 # MPW map status line window: ^[PY99:98^[\
18408 # SCP select status line: ^[[0;98v
18409 # ED erase entire partition: ^[[2J
18410 # SCP select main partition: ^[[v
18411 # SM character insertion mode: ^[[4h
18412 # RM character replacement mode: ^[[4l
18413 # COO cursor on: ^[[r
18414 # COO cursor off: ^[[1r
18415 # SGR dim (turquoise) rev attr: ^[[2;7m
18416 # SGR Data normal attr: ^[[m
18417 # SO Line-graphic mode ON: ^N
18418 # SI Line-graphic mode OFF: ^O
18419 # MC start routing to printer: ^[[5i
18420 # MC stop routing to printer: ^M^[[4i
18423 # This entry covers the following terminals:
18424 # dku7102, tws2102, and tws models 2105 to 2112
18425 tws-generic|dku7102|Bull Questar tws terminals,
18426 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18427 cols#80, it#8, lines#24, wsl#80,
18428 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18429 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18430 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18431 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18432 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18433 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18434 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18435 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18436 il1=\E[L, ind=^J, invis=\E[0;8m,
18437 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18438 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18439 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18440 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18441 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18442 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18443 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18444 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18445 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18446 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18447 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18448 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18449 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18450 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18451 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18452 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18453 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18455 tws2103|xdku|BULL Questar tws2103,
18456 ht=^I, use=tws-generic,
18457 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18458 ht=^I, use=tws2102-sna,
18459 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18460 clear=\E[2J\E[H, cup@, dl@, dl1@,
18461 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18462 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18464 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18465 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18466 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18468 #=========================================================#
18469 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18470 #=========================================================#
18472 # Description written by J. Staerck (BULL SA)
18473 # Copyright (c) 1989 BULL SA
18474 #---------------------------------------------------------------------------
18475 # This entry is used for terminals with vt320 emulation mode
18476 # and following set-up :
18477 # 8 bit ISO Latin Character Set (ISO 8859-1),
18478 # 7 bit Control Characters,
18479 # 80 columns screen.
18480 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18481 # They are used in string capabilities with vt220-320 emulation mode.
18482 # In the following DEC definitions, two kinds of terminfo databases are
18484 # 1. the first with Command Sequence Introducer starting with escape
18485 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18486 # 2. the second with Command Sequence Introducer starting with escape
18487 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18488 # Soft Terminal Reset esc [ ! p
18489 # RIS (erases screen): esc c
18490 # DECKPNM numeric keypad mode: esc >
18491 # DECKPAM applic. keypad mode: esc =
18492 # DECSTBM Scrolling region: esc [ r
18493 # SCS select G0 = US: esc ( B
18494 # SCS select G1 = line-graphic: esc ) 0
18495 # Select 7-bit C1 controls: esc sp F
18496 # Select 8-bit C1 controls: esc sp G
18497 # Select cursor home: esc [ H
18498 # Select erase screen: esc [ J
18499 # SM KAM lock keyboard: esc [ 2 h
18500 # RM KAM unlock keyboard: esc [ 2 l
18501 # SM SRM local echo off: esc [ 1 2 h
18502 # RM SRM local echo on: esc [ 1 2 l
18503 # SM LNM New line : esc [ 2 0 h
18504 # RM LNM return = CR only: esc [ 2 0 l
18505 # SM DECCKM cursor keys mode: esc [ ? 1 h
18506 # RM DECCKM appli. keys mode: esc [ ? 1 l
18507 # SM DECANM ANSI mode on: esc [ ? 2 h
18508 # RM DECANM ANSI mode off: esc [ ? 2 l
18509 # SM DECCOLM 132-column screen: esc [ ? 3 h
18510 # RM DECCOLM 80-column screen: esc [ ? 3 l
18511 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18512 # RM DECSCLM Jump scroll: esc [ ? 4 l
18513 # SM DECSCNM screen light backgr. esc [ ? 5 h
18514 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18515 # SM DECOM move within margins: esc [ ? 6 h
18516 # RM DECOM move outside margins: esc [ ? 6 l
18517 # SM DECAWM auto right margin: esc [ ? 7 h
18518 # RM DECAWM auto right margin: esc [ ? 7 l
18519 # SM DECARM auto repeat: esc [ ? 8 h
18520 # RM DECARM auto repeat: esc [ ? 8 l
18521 # DECSASD Select active main: esc [ 0 $ }
18522 # DECSASD Select active status: esc [ 1 $ }
18523 # DECSSDT Select status none: esc [ 0 $ ~
18524 # DECSSDT Select status indic.: esc [ 1 $ ~
18525 # DECSSDT Select status host-wr: esc [ 2 $ ~
18526 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18527 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18528 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18529 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18530 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18531 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18532 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18533 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18534 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18535 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18536 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18537 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18538 # Char. and Line attributes: esc [ Ps ... Ps m
18539 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18540 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18543 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18544 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18545 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18546 cols#80, it#8, lines#24, vt#3, wsl#80,
18547 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18548 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18549 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18550 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18551 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18552 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18553 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18554 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18555 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18556 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18557 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18558 is1=\E[63;1"p\E[2h,
18559 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18560 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18561 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18562 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18563 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18564 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18565 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18566 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18567 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18568 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18569 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
18570 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
18571 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
18572 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18573 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18574 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18575 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18576 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
18577 bq300-rv|Bull vt320 reverse 80 columns,
18578 flash=\E[?5l$<50>\E[?5h,
18579 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18581 bq300-w|Bull vt320 132 columns,
18583 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18584 rs2=\E[?3h, use=bq300,
18585 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18587 flash=\E[?5l$<50>\E[?5h,
18588 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18589 rs2=\E[?3h, use=bq300,
18591 # This entry is used for terminals with vt320 emulation mode
18592 # and following set-up :
18593 # 8 bit ISO Latin Character Set (ISO 8859-1),
18594 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18595 # 80 columns screen.
18596 # Soft Terminal Reset csi ! p
18597 # RIS (erases screen): esc c
18598 # DECKPNM numeric keypad mode: esc >
18599 # DECKPAM applic. keypad mode: esc =
18600 # DECSTBM Scrolling region: esc [ r
18601 # SCS select G0 = US: esc ( B
18602 # SCS select G1 = line-graphic: esc ) 0
18603 # Select 7-bit C1 controls: esc sp F
18604 # Select 8-bit C1 controls: esc sp G
18605 # Select cursor home: csi H
18606 # Select erase screen: csi J
18607 # SM KAM lock keyboard: csi 2 h
18608 # RM KAM unlock keyboard: csi 2 l
18609 # SM SRM local echo off: csi 1 2 h
18610 # RM SRM local echo on: csi 1 2 l
18611 # SM LNM New line : csi 2 0 h
18612 # RM LNM return = CR only: csi 2 0 l
18613 # SM DECCKM cursor keys mode: csi ? 1 h
18614 # RM DECCKM appli. keys mode: csi ? 1 l
18615 # SM DECANM ANSI mode on: csi ? 2 h
18616 # RM DECANM ANSI mode off: csi ? 2 l
18617 # SM DECCOLM 132-column screen: csi ? 3 h
18618 # RM DECCOLM 80-column screen: csi ? 3 l
18619 # SM DECSCLM Smooth scroll: csi ? 4 h
18620 # RM DECSCLM Jump scroll: csi ? 4 l
18621 # SM DECSCNM screen light backgr. csi ? 5 h
18622 # RM DECSCNM screen dark backgr. csi ? 5 l
18623 # SM DECOM move within margins: csi ? 6 h
18624 # RM DECOM move outside margins: csi ? 6 l
18625 # SM DECAWM auto right margin: csi ? 7 h
18626 # RM DECAWM auto right margin: csi ? 7 l
18627 # SM DECARM auto repeat: csi ? 8 h
18628 # RM DECARM auto repeat: csi ? 8 l
18629 # DECSASD Select active main: csi 0 $ }
18630 # DECSASD Select active status: csi 1 $ }
18631 # DECSSDT Select status none: csi 0 $ ~
18632 # DECSSDT Select status indic.: csi 1 $ ~
18633 # DECSSDT Select status host-wr: csi 2 $ ~
18634 # SM DECTCEM Visible cursor: csi ? 2 5 h
18635 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18636 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18637 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18638 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18639 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18640 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18641 # Char. and Line attributes: csi Ps ... Ps m
18642 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18643 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18644 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18645 bq300-8|Bull vt320 full 8 bits 80 columns,
18646 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18647 cols#80, it#8, lines#24, vt#3, wsl#80,
18648 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18649 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18650 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18651 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18652 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18653 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18654 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
18655 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18656 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18657 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18658 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
18659 is1=\E[63;2"p\E[2h,
18660 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18661 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18662 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18663 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18664 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18665 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18666 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18667 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18668 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18669 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18670 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18671 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18672 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
18673 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
18674 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18675 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18676 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
18677 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18678 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18679 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18680 flash=\233?5l$<50>\233?5h,
18681 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18683 bq300-8w|Bull vt320 8-bit 132 columns,
18685 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18686 rs2=\233?3h, use=bq300-8,
18687 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18689 flash=\233?5l$<50>\233?5h,
18690 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18691 rs2=\233?3h, use=bq300-8,
18693 # This entry is used for terminals with vt320 emulation mode
18694 # a 102 keys keyboard (PC scancode !) and following set-up :
18695 # 8 bit ISO Latin Character Set (ISO 8859-1),
18696 # 7 bit Control Characters,
18697 # 80 columns screen.
18698 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18699 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18700 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18701 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18702 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18703 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18704 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18705 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18706 flash=\E[?5l$<50>\E[?5h,
18707 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18709 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18711 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18712 rs2=\E[?3h, use=bq300-pc,
18713 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18715 flash=\E[?5l$<50>\E[?5h,
18716 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18717 rs2=\E[?3h, use=bq300-pc,
18718 # 8 bit ISO Latin Character Set (ISO 8859-1),
18719 # 8 bit Control Characters,
18720 # 80 columns screen.
18721 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18722 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18723 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18724 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18725 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18726 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18727 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18728 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18729 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18730 flash=\E[?5l$<50>\E[?5h,
18731 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18733 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18735 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18736 rs2=\E[?3h, use=bq300-8-pc,
18737 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18739 flash=\E[?5l$<50>\E[?5h,
18740 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18741 rs2=\E[?3h, use=bq300-8-pc,
18743 #======================================================#
18744 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18745 #======================================================#
18747 # normal mode, 8 bits, 80 columns terminal.
18749 # RIS reset initial state: ^[c
18750 # BLE bell enable ^[h
18751 # BLD bell disable ^[g
18752 # CAMS char. attr. mode set ^[[D
18753 # CAMR char. attr. mode reset ^[[G
18755 # KBU keyboard unlock (set) ^[[W
18756 # KBL keyboard lock (reset) ^[[X
18757 # CM character mode (async.) ^[k
18758 # NEP non echoplex mode (by host) ^[l
18759 # EP echoplex mode (by host) ^[m
18760 # IM insert mode set ^[[I
18761 # IM insert mode reset ^[[J
18762 # RMS roll mode set ^[r
18763 # RMR roll mode reset ^[q
18764 # SM78 set mode vip7800 ^[[1q
18765 # SD scroll up (72 lines) ^[[0s
18766 # SD scroll down (72 lines) ^[[1s
18767 # RBM block mode reset ^[[E
18768 # SLS status line set ^[w
18769 # SLR status line reset ^[v
18770 # SLL status line lock ^[O
18771 # LGS Line-graphic mode set ^[G
18772 # LGR Line-graphic mode reset ^[F
18773 # TBC tab clear (at cursor pos.) ^[[g
18774 # TBI tab initialize ^[[N
18775 # TBS tab set (at cursor pos.) ^[p
18776 # PDS print data space ^[[0p
18777 # PHD print host data ^[[3p
18778 # PDT print data terminator ^[[<p
18779 # PRES print adapter reset ^[[2p
18780 # SSPR multi-part. reset ^[[<>u
18781 # SSP0 partition 0 set ^[[00u
18782 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18783 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18784 # SSP3 partition n format 3 ^[[PnPnu
18785 # ATR attribute (visual)
18788 # hide (blank) : ^[sH
18790 # inverse video : ^[sI
18795 # This covers the vip7800 and BQ3155-vip7800
18796 vip|Bull Questar 3155-7800,
18797 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18798 cols#80, it#8, lines#24, vt#3, wsl#80,
18799 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18800 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18801 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18802 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18803 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18804 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18805 is2=\E[00u\E[<>001001024080024080u\E[01u,
18806 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18807 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18808 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18809 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18810 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18811 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18812 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18813 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18814 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18815 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18816 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18817 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18818 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18819 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18820 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18821 smul=\Es_, tbc=\E[N, tsl=\Ew,
18822 # normal screen, 8 bits, 132 columns terminal.
18823 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18825 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18826 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18828 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18829 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18830 cols#132, lines#72, wsl#132,
18831 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18836 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18837 # that is smaller than the screen, and puts up a warning message
18838 # outside the window. Te erases the warning message, puts the
18839 # window back to be the whole screen, and puts the cursor at just
18840 # below the small window. I defined <cnorm> and <civis> to really turn
18841 # the cursor on and off, but I have taken this out since I don't
18842 # like the cursor being turned off when vi exits.
18843 cg7900|chromatics|chromatics 7900,
18846 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18847 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18848 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18849 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18850 rmso=\001C1\,\001c2\,,
18851 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18852 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18854 #### Computer Automation
18857 ca22851|computer automation 22851,
18860 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18861 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18862 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18867 # This entry has correct padding and the undocumented "ri" capability
18868 cyb83|xl83|cybernex xl-83,
18871 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18872 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18873 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18874 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18875 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18876 cyb110|mdl110|cybernex mdl-110,
18879 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18880 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18881 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18882 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18883 ht=\011$<43>, ich1=\016A\035$<3.5>,
18884 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18888 # Datapoint is gone. They used to be headquartered in Texas.
18889 # They created ARCnet, an Ethernet competitor that flourished for a while
18890 # in the early 1980s before 3COM got wise and cut its prices. The service
18891 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18894 dp3360|datapoint|datapoint 3360,
18897 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18898 ed=^_, el=^^, home=^], ind=^J,
18900 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18901 # The Datapoint 8242 Workstation was sold at least between 1985
18902 # and 1989. To make the terminal work with this entry, press
18903 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18904 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18905 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18906 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18907 # fact unusable because the strings sent by the terminal conflict
18908 # with other keys).
18909 # The terminal is capable of displaying "box draw" characters.
18910 # For each graphic character you must send 2 ESC's (\E\E) followed
18911 # by a control character as follows:
18912 # character meaning
18913 # ========= =======
18916 # ctrl-G bottom tee
18919 # ctrl-J top left corner
18920 # ctrl-K top right corner
18921 # ctrl-L bottom left corner
18922 # ctrl-M bottom right corner
18923 # ctrl-N horizontal line
18924 # ctrl-O vertical line
18925 # Unfortunately this cannot be fitted into the termcap/terminfo
18926 # description scheme.
18927 dp8242|datapoint 8242,
18930 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18931 cr=^M, cub1=^H, cud1=^J,
18932 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18933 home=^U, ht=^I, il1=\E^T, ind=^C,
18934 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18935 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18936 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18937 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18938 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18939 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18940 smso=\E^E, smul=\E^F,
18941 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18943 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18945 # These entries are DEC's official terminfos for its older terminals.
18946 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18947 # Engineering for more information. Updated terminfos and termcaps
18948 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18954 bel=^G, cr=^M, cub1=^H, cud1=^J,
18958 bel=^G, cr=^M, cub1=^H, cud1=^J,
18962 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18963 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
18967 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18968 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18969 el=\EK, ht=^I, ind=^J, ri=\EI,
18970 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
18971 vt61|vt-61|vt61.5|dec vt61,
18973 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
18974 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
18975 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
18976 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18979 # The gigi does standout with red!
18980 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
18981 gigi|vk100|dec gigi graphics terminal,
18984 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
18985 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18986 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18987 el=\E[K, ht=^I, ind=^J,
18988 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
18989 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
18990 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
18991 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18992 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
18995 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
18996 # a PC differentiated from the IBM clones. It was a total, ludicrous,
18997 # grossly-overpriced failure (among other things, DEC's OS didn't include
18998 # a format program, so you had to buy pre-formatted floppies from DEC at
18999 # a hefty premium!).
19000 pro350|decpro|dec pro console,
19002 cols#80, it#8, lines#24,
19003 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19004 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19005 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19006 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19007 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19008 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19009 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19014 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19015 dw2|decwriter|dw|decwriter II,
19018 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19019 # \E(B Use U.S. character set (otherwise # => british pound !)
19020 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19021 # \E[w 10 char/in pitch
19022 # \E[1;132 full width horizontal margins
19023 # \E[2g clear all tab stops
19025 # \E[66t 66 lines/page (for \f)
19026 # \E[1;66r full vertical page can be printed
19027 # \E[4g clear vertical tab stops
19028 # \E> disable alternate keypad mode (so it transmits numbers!)
19029 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19030 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19033 # The dw3 does standout with wide characters.
19035 dw3|la120|decwriter III,
19038 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19039 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19040 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19041 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19045 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19046 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19048 # These aren't official
19049 ln03|dec ln03 laser printer,
19052 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19053 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19055 ln03-w|dec ln03 laser printer 132 cols,
19057 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19058 kcud1=^J, nel=^M^J, use=ln03,
19060 #### Delta Data (dd)
19063 # Untested. The cup sequence is hairy enough that it probably needs work.
19064 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19065 # There are BSD-derived termcap entries floating around for this puppy
19066 # that are *certainly* wrong.
19067 delta|dd5000|delta data 5000,
19070 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19071 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19072 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19074 #### Digital Data Research (ddr)
19077 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19078 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19080 cols#80, it#8, lines#24, vt#3,
19081 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19082 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19083 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19084 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19085 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19086 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19087 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19088 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19089 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19090 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19091 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19094 #### Evans & Sutherland
19097 # Jon Leech <leech@cs.unc.edu> tells us:
19098 # The ps300 was the Evans & Sutherland Picture System 300, a high
19099 # performance 3D vector graphics system with a bunch of specialized hardware.
19100 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19101 # evolutions including (limited) color versions such as the PS330C. PS300s
19102 # were effectively obsolete by the late 80s, replaced by raster graphics
19103 # systems, although specialized applications like molecular modelling
19104 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19105 # are out of production, though of course E&S is very much alive (in 1996).
19106 # (ps300: changed ":pt@:" to "it@" -- esr)
19108 ps300|Picture System 300,
19111 rmso@, rmul@, smso@, smul@, use=vt100,
19113 #### General Electric (ge)
19116 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19119 bel=^G, cr=^M, cud1=^J, ind=^J,
19121 #### Heathkit/Zenith
19124 # Here is a description of the H19 DIP switches:
19127 # 0-3 = baud rate as follows:
19132 # 0 1 0 1 1200 baud
19133 # 1 0 0 0 2400 baud
19134 # 1 0 1 0 4800 baud
19135 # 1 1 0 0 9600 baud
19136 # 1 1 0 1 19.2K baud
19138 # 4 = parity (0 = no parity)
19139 # 5 = even parity (0 = odd parity)
19140 # 6 = stick parity (0 = normal parity)
19141 # 7 = full duplex (0 = half duplex)
19144 # 0 = block cursor (0 = underscore cursor)
19145 # 1 = no key click (0 = keyclick)
19146 # 2 = wrap at end of line (0 = no wrap)
19147 # 3 = auto LF on CR (0 = no LF on CR)
19148 # 4 = auto CR on LF (0 = no CR on LF)
19149 # 5 = ANSI mode (0 = VT52 mode)
19150 # 6 = keypad shifted (0 = keypad unshifted)
19151 # 7 = 50Hz refresh (1 = 60Hz refresh)
19153 # Factory Default settings are as follows:
19155 # S401 1 0 0 0 1 1 0 0
19156 # S402 0 0 0 0 0 0 0 0
19157 # (h19: I added <rmam>/<smam> based on the init string;
19158 # also added empty <acsc> to suppress a tic warning -- esr)
19159 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19160 OTbs, am, mir, msgr,
19161 cols#80, it#8, lines#24,
19162 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19163 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19164 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19165 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19166 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19167 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19168 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19169 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19170 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19171 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19172 h19-bs|heathkit w/keypad shifted,
19173 rmkx=\Eu, smkx=\Et, use=h19-b,
19174 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19175 rmkx=\Eu, smkx=\Et, use=h19-u,
19176 # (h19: merged in <ip> from BSDI hp19-e entry>;
19177 # also added empty <acsc> to suppress a tic warning --esr)
19178 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19179 # Tim tells us that:
19180 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19181 # This terminal suffers from the same famous insert-mode padding lossage
19182 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19183 # unusable on this box, since even a half-scroll up or down the window
19184 # causes flaming terminal death.
19186 # On the Z19, the only way I have found around this problem is to remove
19187 # the :al: and :dl: entries entirely. No amount of extra padding will
19188 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19189 # makes Emacs a little slower, but it remains in the land of the living.
19191 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19192 OTbs, am, eslok, hs, mir, msgr,
19193 cols#80, it#8, lines#24,
19194 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19195 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19196 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19197 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19198 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19199 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19200 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19201 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19202 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19203 h19-u|heathkit with underscore cursor,
19204 cnorm@, cvvis@, use=h19-b,
19205 h19-g|h19g|heathkit w/block cursor,
19206 cnorm=\Ex4, cvvis@, use=h19-b,
19207 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19209 dl1=\EM, il1=\EL, use=h19,
19211 # The major problem with the Z29 is that it requires more padding than the Z19.
19213 # The problem with declaring an H19 to be synonymous with a Z29 is that
19214 # it needs more padding. It especially loses if a program attempts
19215 # to put the Z29 into insert mode and insert text at 9600 baud. It
19216 # even loses worse if the program attempts to insert tabs at 9600
19217 # baud. Adding padding to text that is inserted loses because in
19218 # order to make the Z29 not die, one must add so much padding that
19219 # whenever the program tries to use insert mode, the effective
19220 # rate is about 110 baud.
19222 # What program would want to put the terminal into insert mode
19223 # and shove stuff at it at 9600 baud you ask?
19225 # Emacs. Emacs seems to want to do the mathematically optimal
19226 # thing in doing a redisplay rather than the practical thing.
19227 # When it is about to output a line on top of a line that is
19228 # already on the screen, instead of just killing to the end of
19229 # the line and outputting the new line, it compares the old line
19230 # and the new line and if there are any similarities, it
19231 # constructs the new line by deleting the text on the old line
19232 # on the terminal that is already there and then inserting new
19233 # text into the line to transform it into the new line that is
19234 # to be displayed. The Z29 does not react kindly to this.
19236 # But don't cry for too long.... There is a solution. You can make
19237 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19238 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19239 # line will be really slow", you say. Well there is a sort of a
19240 # solution to that too. There is an insert character option on
19241 # the Z29 that will insert one character. Unfortunately, it
19242 # involves putting the terminal into ansi mode, inserting the
19243 # character, and changing it back to H19 mode. All this takes 12
19244 # characters. Pretty expensive to insert one character, but it
19245 # works. Either Emacs doesn't try to use its inserting hack when
19246 # it's only given an insert character ability or the Z29 doesn't
19247 # require padding with this (the former is probably more likely,
19248 # but I haven't checked it out).
19249 # (z29: added empty <acsc> to suppress a tic warning, merged in
19250 # status line capabilities from BRL entry --esr)
19251 z29|zenith29|z29b|zenith z29b,
19252 OTbs, OTpt, am, eslok, hs, mir, msgr,
19253 OTkn#10, cols#80, lines#24,
19254 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19255 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19256 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19257 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19258 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19259 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19260 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19261 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19262 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19263 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19264 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19265 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19266 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19267 # the world is stable. <rs1> causes the terminal to be reset to the state
19268 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19269 # cursor, bc -> block cursor.
19270 # From: Mike Meyers
19271 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19272 # looks vt100-compatible -- esr)
19273 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19274 OTbs, OTpt, am, eslok, hs, mir, msgr,
19275 OTkn#10, cols#80, it#8, lines#24,
19276 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19277 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19278 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19279 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19280 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19281 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
19282 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
19283 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
19284 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
19285 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19286 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
19287 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
19288 rmso=\E[m, rmul=\E[m,
19289 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19290 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19291 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19292 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19293 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19295 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19296 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19298 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19299 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19301 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19302 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19303 am, eslok, hs, mc5i, mir, msgr, xon,
19305 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19306 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19307 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19308 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19309 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19310 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19311 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19312 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19313 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19314 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19315 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19316 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19317 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19318 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19319 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19320 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19321 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19322 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19323 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19325 # From: Brad Brahms <Brahms@USC-ECLC>
19326 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19327 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19328 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19329 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19330 OTbs, OTpt, mir, msgr,
19331 OTkn#10, cols#80, it#8, lines#24,
19332 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19333 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19334 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19335 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19336 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19337 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19338 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19339 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19340 smir=\E@, smso=\Ep,
19341 p19|h19-b with il1/dl1,
19342 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19343 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19344 # (ztx: removed duplicate :sr: -- esr)
19345 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19346 OTbs, am, eslok, hs,
19347 cols#80, it#8, lines#24,
19348 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19349 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19350 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19351 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19352 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19353 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19354 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19355 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19357 #### IMS International (ims)
19359 # There was a company called IMS International located in Carson City,
19360 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19361 # bus/Z80 hardware and a line of terminals called Ultimas.
19364 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19365 ims950-b|bare ims950 no init string,
19367 # (ims950: removed obsolete ":ko@:" -- esr)
19368 ims950|ims televideo 950 emulation,
19370 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19371 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19372 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19373 ims950-rv|ims tvi950 rev video,
19375 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19376 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19377 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19379 cols#80, it#8, lines#24,
19380 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19381 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19382 ht=^I, if=/usr/share/tabset/vt100,
19383 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19384 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19385 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19388 #### Intertec Data Systems
19390 # I think this company is long dead as of 1995. They made an early CP/M
19391 # micro called the "Intertec Superbrain" that was moderately popular,
19392 # then sank out of sight.
19395 superbrain|intertec superbrain,
19398 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19399 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19400 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19401 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19402 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19403 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19404 # and the reverse is actually true. Try it. -- esr)
19405 intertube|intertec|Intertec InterTube,
19408 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19409 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19410 ind=^J, rmso=\E0@, smso=\E0P,
19411 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19412 # are typing and a command comes in, the keystrokes you type get interspersed
19413 # with the command and it messes up
19414 intertube2|intertec data systems intertube 2,
19416 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19417 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19418 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19420 #### Ithaca Intersystems
19422 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19423 # past. They used to be reachable at:
19425 # Ithaca Intersystems
19426 # 1650 Hanshaw Road
19427 # Ithaca, New York 14850
19429 # However, the outfit went bankrupt years ago.
19432 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19433 # These entries were written (originally in termcap syntax) by Brian Yandell
19434 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19435 # University of Wisconsin.
19437 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19438 # removed <if=/usr/share/tabset/init.graphos> and
19439 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19440 graphos|graphos III,
19442 cols#80, it#8, lines#24,
19443 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19444 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19445 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19446 cuu=\E[%p1%dA, cuu1=\E[A,
19447 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19448 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19449 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19450 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19451 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19452 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19453 smir=\E[4h, smso=\E[7m,
19454 graphos-30|graphos III with 30 lines,
19456 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19460 # These people used to be reachable at:
19463 # 1393 Main Street,
19464 # Waltham, MA 02154
19465 # Vox: (617)-890-5796.
19467 # However, if you call that number today you'll get an insurance company.
19468 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19469 # 26 Feb 1997 that says:
19471 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19472 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19473 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19474 # panel-mount etc). I can be emailed at sonfour@aol.com
19476 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19477 # dated 1984. According to the manual, it featured Tek 4010/4014
19478 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19481 modgraph|mod24|modgraph terminal emulating vt100,
19484 cvvis=\E\^9;0s\E\^7;1s,
19485 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19486 rf@, ri=\EM\E[K$<5/>, use=vt100,
19487 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19488 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19490 cols#80, it#8, lines#24,
19491 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19492 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19493 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19494 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19497 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19498 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19499 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19500 # mark and using delete-to-killbuffer work correctly. However, we would
19501 # like normal mode of operation to be using a Modgraph with 48 line setting.
19502 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19503 # the setting mark and delete-to-killbuffer results in the deletion of only
19504 # the line the mark is set on.
19505 # We've discovered that the delete-to-killbuffer works correctly
19506 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19507 # the first line disappears but a ctrl-l shows that it did work
19509 modgraph48|mod|Modgraph w/48 lines,
19510 OTbs, OTpt, am, xenl,
19511 cols#80, it#8, lines#48, vt#3,
19512 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19513 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19514 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19515 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19516 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19517 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19518 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19519 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19520 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19521 smso=\E[7m, smul=\E[4m,
19523 #### Morrow Designs
19525 # This was George Morrow's company. They started in the late 1970s making
19526 # S100-bus machines. They used to be reachable at:
19529 # 600 McCormick St.
19530 # San Leandro, CA 94577
19532 # but they're long gone now (1995).
19535 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19536 # Jeff's specimen was dated June 1984.
19537 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19538 mt70|mt-70|Morrow MD-70; native Morrow mode,
19539 am, mir, msgr, xon,
19540 cols#80, it#8, lines#24,
19541 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19542 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19543 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19544 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19545 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19546 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19547 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19548 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19549 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19550 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19551 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19552 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19553 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19554 smul=\EG1, tbc=\E0, use=adm+sgr,
19559 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19561 ex155|Motorola Exorterm 155,
19563 OTkn#5, OTug#1, cols#80, lines#24,
19564 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19565 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19566 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19567 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19568 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19572 # This company is still around in 1995, manufacturing point-of-sale systems.
19574 omron|Omron 8025AG,
19577 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19578 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19579 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19583 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19584 # were competition for things like the Tektronics 4025.
19587 # Ramtek 6221 from BRL, probably by Doug Gwyn
19588 # The following SET-UP modes are assumed for normal operation:
19589 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19590 # NEWLINE_OFF 80_COLUMNS
19591 # Other SET-UP modes may be set for operator convenience or communication
19592 # requirements; I recommend
19593 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19594 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19595 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19596 # Note that the Control-E key is useless on this brain-damaged terminal. No
19597 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19598 rt6221|Ramtek 6221 80x24,
19599 OTbs, OTpt, msgr, xon,
19600 OTkn#4, cols#80, it#8, lines#24, vt#3,
19601 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19602 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19603 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19604 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19605 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19606 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19607 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19608 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19609 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19610 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19611 rmso=\E[m, rmul=\E[m,
19612 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19613 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19614 smul=\E[4m, tbc=\E[3g,
19615 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19616 rt6221-w|Ramtek 6221 160x48,
19617 cols#160, lines#48,
19618 ll=\E[48;1H, use=rt6221,
19623 # RCA VP3301 or VP3501
19624 rca|rca vp3301/vp3501,
19627 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19628 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19634 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19635 # The following SET-UP modes are assumed for normal operation:
19636 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19637 # ONLINE ANSI CURSOR_VISIBLE
19638 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19639 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19640 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19641 # For use with graphics software, all graphics modes should be set to factory
19642 # default. Other SET-UP modes may be set for operator convenience or
19643 # communication requirements. No delays are specified; use "stty ixon -ixany"
19644 # to enable DC3/DC1 flow control!
19645 # I commented out the scrolling capabilities since they are too slow.
19646 hirez100|Selanar HiREZ-100,
19647 OTbs, OTpt, mir, msgr, xon,
19648 OTkn#4, cols#80, it#8, lines#48, vt#3,
19649 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19650 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19651 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19652 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19653 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19654 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19655 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19656 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19657 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19658 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19659 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19660 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19661 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19662 smul=\E[4m, tbc=\E[3g,
19663 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19664 cols#132, use=hirez100,
19669 # From University of Wisconsin
19670 vsc|Signetics Vsc Video driver by RMC,
19672 cols#80, it#8, lines#26,
19673 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19674 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19675 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19676 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19680 # Alan Frisbie <frisbie@flying-disk.com> writes:
19682 # As you may recall, the Soroc logo consisted of their name,
19683 # with the letter "S" superimposed over an odd design. This
19684 # consisted of a circle with a slightly smaller 15 degree (approx.)
19685 # wedge with rounded corners inside it. The color was sort of
19686 # a metallic gold/yellow.
19688 # If I had been more of a beer drinker it might have been obvious
19689 # to me, but it took a clue from their service department to make
19690 # me exclaim, "Of course!" The circular object was the top of
19691 # a beer can (the old removable pop-top style) and "Soroc" was an
19692 # anagram for "Coors".
19694 # I can just imagine the founders of the company sitting around
19695 # one evening, tossing back a few and trying to decide what to
19696 # call their new company and what to use for a logo.
19699 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19700 soroc120|iq120|soroc|soroc iq120,
19701 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19702 kcuf1=^L, kcuu1=^K, use=adm3a,
19703 soroc140|iq140|soroc iq140,
19706 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19707 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19708 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19709 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19710 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19711 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19712 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19714 #### Southwest Technical Products
19716 # These guys made an early personal micro called the M6800.
19717 # The ct82 was probably its console terminal.
19720 # (swtp: removed obsolete ":bc=^D:" -- esr)
19721 swtp|ct82|southwest technical products ct82,
19724 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19725 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19726 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19727 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19728 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19732 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19734 # Synertek used to make ICs, various 6502-based single-board process
19735 # control and hobbyist computers, and assorted peripherals including a
19736 # series of small inexpensive terminals (I think they were one of the
19737 # first to have a "terminal-on-a-keyboard", where the terminal itself
19738 # was only slightly larger than the keyboard).
19740 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19741 # was a 40x24 terminal that could connect to a standard TV through a
19742 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19743 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19744 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19745 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19746 # ROM and 2 ROMs as character generators. They were incredibly simple,
19747 # and I've never had any problems with mine (witness the fact that mine
19748 # was made in 1981 and is still working great... I've blown the video
19749 # output transistor a couple of times, but it's a 2N2222 :-)
19751 # The KTM-3 (which is what is listed in the terminfo file) was their
19752 # attempt at putting a KTM-2 in a box (and some models came with a
19753 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19754 # control and escape sequences are very different. The KTM-3 was always
19755 # real broken, at least according to the folks I've talked to about it.
19757 # The padding in the entry is probably off--these terminals were very
19758 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19759 # anyone with any sanity replaced the ROMs with something that provided
19760 # a reasonable subset of VT100 functionality, since the usual ROMs were
19761 # obviously very primitive... oh, you could get an upgraded ROM from
19762 # Synertek for some incredible amount of money, but what hacker with an
19763 # EPROM burner would do that? :)
19765 # Sorry I don't have any contact info; I believe they were located in
19766 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19767 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19768 # business these days.
19771 # Tested, seems to work fine with vi.
19772 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19775 clear=^Z, cub1=^H, cuf1=^L,
19776 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19778 #### Tab Office Products
19780 # TAB Products Co. - Palo Alto, California
19781 # Electronic Office Products,
19782 # 1451 California Avenue 94304
19784 # I think they're out of business.
19787 # The tab 132 uses xon/xoff, so no padding needed.
19788 # <smkx>/<rmkx> have nothing to do with arrow keys.
19789 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19790 # Seems to be no way to get rid of status line.
19791 # The manual for this puppy was dated June 1981. It claims to be VT52-
19792 # compatible but looks more vt100-like.
19793 tab132|tab|tab132-15|tab 132/15,
19795 OTdN@, cols#80, lines#24, lm#96,
19796 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19797 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19798 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19799 tab132-w|tab132 in wide mode,
19801 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19802 tab132-rv|tab132 in reverse-video mode,
19803 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19804 tab132-w-rv|tab132 in reverse-video/wide mode,
19805 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19810 # Research Incorporated
19811 # 6425 Flying Cloud Drive
19812 # Eden Prairie, MN 55344
19813 # Vox: (612)-941-3300
19815 # The Teleray terminals were all discontinued in 1992-93. RI still services
19816 # and repairs these beasts, but no longer manufactures them. The Teleray
19817 # people believe that all the types listed below are very rare now (1995).
19818 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19819 # Model 100) that were ANSI-compatible.
19821 # Note two things called "teleray". Reorder should move the common one
19822 # to the front if you have either. A dumb teleray with the cursor stuck
19823 # on the bottom and no obvious model number is probably a 3700.
19826 t3700|dumb teleray 3700,
19829 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19830 t3800|teleray 3800 series,
19832 cols#80, it#8, lines#24,
19833 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19834 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19835 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19836 t1061|teleray|teleray 1061,
19837 OTbs, am, km, xhp, xt,
19838 cols#80, it#8, lines#24, xmc#1,
19839 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19840 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19841 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19842 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19843 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19844 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19845 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19847 t1061f|teleray 1061 with fast PROMs,
19848 dl1=\EM, il1=\EL, ip@, use=t1061,
19849 # "Teleray Arpa Special", officially designated as
19850 # "Teleray Arpa network model 10" with "Special feature 720".
19851 # This is the new (1981) fast microcode updating the older "arpa" proms
19852 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19853 # converts the keypad to programmable function keys, and has other goodies.
19854 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19855 # programs handle such lossage properly.
19856 # Note: this is NOT the old termcap's "t1061f with fast proms."
19857 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19858 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19859 t10|teleray 10 special,
19861 cols#80, it#8, lines#24, xmc#2,
19862 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
19863 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19864 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19865 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19867 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19868 # back/forth words. Put the function keys (f1-f10) where they can be
19869 # found, and turn off the other magic keys along the top row, except
19870 # for line/local. Do the magic appropriate to make the page shifts work.
19871 # Also toggle ^S/^Q for those of us who use Emacs.
19873 am, da, db, mir, xhp, xt,
19875 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19876 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19877 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19878 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19879 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19880 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19881 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19882 smso=\E[7m, smul=\E[4m,
19884 #### Texas Instruments (ti)
19887 # The Silent 700 was so called because it was built around a quiet thermal
19888 # printer. It was portable, equipped with an acoustic coupler, and pretty
19889 # neat for its day.
19890 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19893 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19896 # Texas Instruments 916 VDT 7 bit control mode
19898 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19900 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19901 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19902 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19903 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19904 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19905 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19906 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19907 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19908 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19909 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19910 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19911 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19912 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19913 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19916 # Texas Instruments 916 VDT 8 bit control mode
19918 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19919 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19920 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19921 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19922 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19923 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19924 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19926 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19928 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19929 cols#132, use=ti916,
19931 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19933 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19934 cols#132, use=ti916-8,
19935 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19937 cols#80, it#8, lines#24,
19938 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19939 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19940 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19941 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19942 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19943 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19944 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19945 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19946 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19947 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19948 smul=\E[4m, tbc=\E[3g,
19949 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19951 cols#80, it#8, lines#24,
19952 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19953 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19954 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19955 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19956 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19957 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19958 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
19959 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
19960 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
19961 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
19962 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19963 smul=\E[4m, tbc=\E[3g,
19964 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
19965 cols#132, use=ti924,
19966 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
19967 cols#132, use=ti924-8,
19968 ti931|Texas Instruments 931 VDT,
19971 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
19972 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19973 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
19974 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
19975 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19976 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
19977 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
19978 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
19979 sgr0=\E4@, smso=\E4A, smul=\E4D,
19980 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
19981 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19982 # (ti926-8: I corrected this from the broken SCO entry -- esr)
19983 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
19984 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19985 ti_ansi|basic entry for ti928,
19986 am, bce, eo, xenl, xon,
19987 colors#8, cols#80, it#8, lines#25, pairs#64,
19988 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
19989 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19990 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19991 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19992 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19993 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
19994 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
19995 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
19996 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
19997 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
19998 smso=\E[7m, smul=\E[4m,
20000 # 928 VDT 7 bit control mode
20002 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20003 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20004 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20005 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20006 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20007 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20009 # 928 VDT 8 bit control mode
20011 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20012 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20013 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20014 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20015 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20016 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20017 kpp=\233T, kprt=\23335~, use=ti_ansi,
20022 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20023 # had just <smso>=\EG6 which I think means standout was supposed to be
20024 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20025 # <invis> might work-- esr)
20026 zen30|z30|zentec 30,
20029 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20030 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20031 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20032 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20033 smul@, use=adm+sgr,
20034 # (zen50: this had extension capabilities
20035 # :BS=^U:CL=^V:CR=^B:
20036 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20037 # which were also in the original entry -- esr)
20038 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20039 zen50|z50|zentec zephyr,
20041 cols#80, lines#24, xmc#1,
20042 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20043 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20044 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20045 rmul@, smul@, use=adm+sgr,
20047 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20048 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20051 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20052 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20053 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20054 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20055 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20056 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20057 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20058 smso=\EM$, smul=\EM0,
20060 ######## OBSOLETE UNIX CONSOLES
20063 #### Apollo consoles
20065 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20066 # labeled HP700s now.
20069 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20070 apollo|apollo console,
20073 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20074 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20075 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20076 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20077 smso=\ES, smul=\EU, vpa=\EO+\s,
20079 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20080 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20081 # both these capabilities.
20082 apollo_15P|apollo 15 inch display,
20083 rmir@, smir@, use=vt132,
20084 apollo_19L|apollo 19 inch display,
20085 rmir@, smir@, use=vt132,
20086 apollo_color|apollo color display,
20087 rmir@, smir@, use=vt132,
20089 #### Convergent Technology
20091 # Burroughs bought Convergent shortly before it merged with Univac.
20092 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20093 # from 1991 or earlier).
20096 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20097 # (aws: removed unknown :dn=^K: -- esr)
20098 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20100 OTug#0, cols#80, lines#28, xmc#0,
20101 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20102 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20103 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20104 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20105 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20106 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20108 awsc|Convergent Technologies AWS workstation under CTOS,
20110 OTug#0, cols#80, lines#24, xmc#0,
20111 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20112 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20113 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20114 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20120 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20121 # The digital uVax II's had a graphic display called a qdss. It was
20122 # supposed to be a high performance graphic accelerator, but it was
20123 # late to market and barely appeared before faster dumb frame buffers
20124 # appeared. I have only used this display while running X11. However,
20125 # during bootup, it was in text mode, and probably had a terminal emulator
20126 # within it. And that is what your termcap entry is for. In graphics
20127 # mode the screen size is 1024x864 pixels.
20128 qdss|qdcons|qdss glass tty,
20130 cols#128, lines#57,
20131 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20132 cup=\E=%p1%c%p2%c, cuu1=^K,
20134 #### Fortune Systems consoles
20136 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20137 # in their day; I (esr) used one myself for a year or so around 1984.
20138 # They had no graphics, though, and couldn't compete against Suns and
20142 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20143 # (This had extension capabilities
20144 # :rv=\EH:re=\EI:rg=0:GG=0:\
20145 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20146 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20147 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20148 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20149 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20150 # to force both magic cookie glitches off. Once upon a time, I
20151 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20152 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20153 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20154 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20155 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20156 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20157 fos|fortune|Fortune system,
20160 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20161 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20162 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20163 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20164 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20165 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20166 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20167 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20168 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20169 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20170 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20171 smso=^\H`, smul=^\HP,
20173 #### Masscomp consoles
20175 # Masscomp has gone out of business. Their product line was purchased by
20176 # comany in Georgia (US) called "XS International", parts and service may
20177 # still be available through them.
20180 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20181 masscomp|masscomp workstation console,
20183 cols#80, it#8, lines#24,
20184 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20185 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20186 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20187 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20188 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20189 masscomp1|masscomp large screen version 1,
20190 cols#104, lines#36, use=masscomp,
20191 masscomp2|masscomp large screen version 2,
20192 cols#64, lines#21, use=masscomp,
20194 ######## OTHER OBSOLETE TYPES
20196 # These terminals are *long* dead -- these entries are retained for
20197 # historical interest only.
20200 #### Obsolete non-ANSI software emulations
20203 # CTRM terminal emulator
20204 # 1. underlining is not allowed with colors: first, is is simulated by
20205 # black on white, second, it disables background color manipulations.
20206 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20207 # so we have to save their status in the static registers A, B and H
20208 # respectively, to be able to restore them when color changes
20209 # (because any color change turns off ALL attributes)
20210 # 3. <bold> and <rev> sequences alternate modes,
20211 # rather than simply entering them. Thus we have to check the
20212 # static register B and H to determine the status, before sending the
20214 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20215 # and then reset colors
20216 # 5. implementation of the protect mode would badly penalize the performance.
20217 # we would have to use \E&bn sequence to turn off colors (as well as all
20218 # other attributes), and keep the status of protect mode in yet another
20219 # static variable. If someone really needs this mode, they would have to
20220 # create another terminfo entry.
20221 # 6. original color-pair is white on black.
20222 # store the information about colors into static registers
20223 # 7. set foreground color. it performs the following steps.
20224 # 1) turn off all attributes
20225 # 2) turn on the background and video attributes that have been turned
20226 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20227 # 3) turn on foreground attributes
20228 # 4) store information about foreground into U,V,W static registers
20229 # 8. turn on background: similar to turn on foreground above
20230 ctrm|C terminal emulator,
20232 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20233 pairs#63, pb#19200, vt#6,
20234 bel=^G, blink=\E&dA%{1}%PA,
20235 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20236 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20237 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20238 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20239 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20240 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20241 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20242 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20243 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20244 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20245 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20246 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20247 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20248 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20249 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20251 # gs6300 - can't use blue foreground, it clashes with underline;
20252 # it's simulated with cyan
20253 # Bug: The <op> capability probably resets attributes.
20254 # (gs6300: commented out <rmln> (no <smln>) --esr)
20255 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20256 am, bce, msgr, xon,
20257 colors#8, cols#80, it#8, lines#24, pairs#63,
20258 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20259 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20260 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20261 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20262 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20263 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20264 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20265 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20266 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20267 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20268 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20269 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20270 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20271 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20273 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20274 # MS-Kermit with Heath-19 emulation mode enabled
20275 # (h19k: changed ":pt@:" to ":it@"
20276 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20281 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20282 # Software (formerly Peripherals Computers & Supplies, Inc) of
20283 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20284 # also be reached at support@synergy.com.
20285 versaterm|versaterm vt100 emulator for the macintosh,
20287 cols#80, it#8, lines#24,
20288 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20289 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20290 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20291 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20292 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20293 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20294 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20295 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20296 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20297 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20298 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20299 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20302 # From: Rick Thomas <ihnp4!btlunix!rbt>
20303 # (xtalk: I added <rmam>/<smam> based on the init string.
20304 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20305 am, mir, msgr, xon,
20306 cols#80, it#8, lines#24, vt#3, xmc#1,
20307 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20308 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20309 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20310 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20311 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20312 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20313 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20314 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20315 rmkx=\E[?1l\E>, rmso=\E[m\s,
20316 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20317 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20318 tbc=\E[3g, use=vt100+fnkeys,
20320 # The official PC terminal emulator program of the AT&T Product Centers.
20321 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20322 simterm|attpc running simterm,
20325 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20326 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20327 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20328 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20330 #### Daisy wheel printers
20332 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20333 # wheel terminals. These are now largely obsolete.
20336 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20337 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20340 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20341 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20342 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20344 is2=\r \E9, use=diablo1620,
20345 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20346 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20347 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20349 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20351 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20353 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20354 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20356 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20357 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20358 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20359 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20360 # around all of memory. Note that return puts a blank ("a return character")
20361 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20362 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20363 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20364 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20365 # I have been unable to get tabs set in all 96 lines - it always leaves at
20366 # least one line with no tabs in it, and once you tab through that line,
20367 # it completely weirds out.
20368 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20371 cols#80, lines#24, lm#96,
20372 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20373 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20374 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20375 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20376 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20380 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20381 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20382 gsi|mystery gsi terminal,
20385 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20387 aj830|aj832|aj|anderson jacobson,
20389 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20391 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20392 aj510|Anderson-Jacobson model 510,
20395 clear=^L, cub1=^H, cuf1=\EX,
20396 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20397 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20398 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20399 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20400 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20402 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20403 # This is incomplete, but it's a start.
20404 nec5520|nec|spinwriter|nec 5520,
20407 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20408 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20410 qume5|qume|Qume Sprint 5,
20413 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20414 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20415 # I suspect the xerox 1720 is the same as the diablo 1620.
20416 xerox1720|x1720|x1750|xerox 1720,
20419 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20422 #### Miscellaneous obsolete terminals, manufacturers unknown
20424 # If you have any information about these (like, a manufacturer's name,
20425 # and a date on the serial-number plate) please send it!
20427 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20430 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20431 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20434 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20435 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20436 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20437 cops10|cops|cops-10|cops 10,
20440 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20441 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20442 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20444 # (d132: removed duplicate :ic=\E5:,
20445 # merged in capabilities from a BRL entry -- esr)
20446 d132|datagraphix|datagraphix 132a,
20449 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20450 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20451 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20452 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20453 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20454 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20455 # mode (which is what this entry looks like) and several other lesser-known
20458 OTbs, am, da, db, msgr, xhp,
20459 cols#80, it#8, lines#24,
20460 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20461 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20462 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20463 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20464 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20465 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20466 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20467 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20468 digilog|digilog 333,
20471 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20473 # The DWK was a terminal manufactured in the Soviet Union c.1986
20474 dwk|dwk-vt|dwk terminal,
20476 cols#80, it#8, lines#24,
20477 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20478 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20479 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20480 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20481 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20482 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20483 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20484 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20485 sgr0=\EX, smacs=\EF, smso=\ET,
20486 env230|envision230|envision 230 graphics terminal,
20488 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
20489 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20491 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20492 # coupler attached, the whole rig fitting in a suitcase and more or less
20493 # portable. Hot stuff for c.1977 :-) -- esr
20494 ep48|ep4080|execuport 4080,
20497 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20498 ep40|ep4000|execuport 4000,
20499 cols#136, use=ep4080,
20500 # Adam Thompson <athompso@pangea.ca> tells us:
20501 # Informer series - these are all portable units, resembling older
20502 # automatic bread-baking machines. The terminal looks like a `clamshell'
20503 # design, but isn't. The structure is similar to the Direct terminals,
20504 # but only half the width. The entire unit is only about 10" wide.
20505 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20506 # keyboard. All the keys are crammed together, much like some laptop
20507 # PCs today, but perhaps less well organized...all these units have a
20508 # bewildering array of plugs on the back, including a built-in modem.
20509 # The 305 was a color version of the 304; the 306 and 307 were mono and
20510 # color terminals built for IBM bisync protocols.
20511 # From: Paul Leondis <unllab@amber.berkeley.edu>
20512 ifmr|Informer D304,
20515 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20516 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20517 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20519 # Entry largely based on wy60 and has the features of wy60ak.
20520 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20521 am, bw, hs, km, mir, msgr, ul, xon,
20522 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20523 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20524 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20525 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20526 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20527 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20528 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20530 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20531 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20532 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20533 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20534 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20535 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20536 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20537 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20538 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20539 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20540 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20541 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20542 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20543 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20544 rs3=\EwG\Ee($<150>,
20545 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20546 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20547 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20548 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20549 uc=\EG8\EG0, use=adm+sgr,
20550 teletec|Teletec Datascreen,
20553 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20555 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20556 # This description is for the LANPAR Technologies VISION 3220
20557 # terminal from 1984/85. The function key definitions k0-k5 represent the
20558 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20559 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20561 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20562 # I had a couple of scopes (3221) like this once where I used to work, around
20563 # the 1987 time frame if memory serves me correctly. These scopes were made
20564 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
20565 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
20566 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
20567 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
20568 # (3221) cost about $1500 each, and one was always broken -- had to be sent
20569 # back to the shop for repairs.
20570 # The only real advantage these scopes had over the VT-240's were:
20571 # 1) They were faster in the Regis display, or at least the ones I did
20572 # 2) They had a handy debugging feature where you could split-screen the
20573 # scope, the graphics would appear on the top, and the REGIS commands would
20574 # appear on the bottom. I don't remember the VT-240s being able to do that.
20575 # I would swear that LANPAR Technologies was in MA someplace, but since I
20576 # don't work at the same place anymore, and those terminals and manuals were
20577 # long since junked, I cannot be any more sure than that.
20579 # (v3220: removed obsolete ":kn#10:",
20580 # I added <rmam>/<smam> based on the init string -- esr)
20581 v3220|LANPAR Vision II model 3220/3221/3222,
20582 OTbs, am, mir, xenl,
20583 cols#80, it#8, lines#24,
20584 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20585 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20586 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
20587 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
20588 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
20589 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
20590 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
20591 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20592 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
20593 ######## ICH/ICH1 VERSUS RMIR/SMIR
20595 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
20596 # are present; the symptom is doubled characters in an update using insert.
20597 # These applications are technically correct; in both 4.3BSD termcap and
20598 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
20599 # unless the terminal needs both. To my knowledge, no terminal still in this
20600 # file requires both other than the very obsolete dm2500.
20602 # For ncurses-based applications this is not a problem, as ncurses uses
20603 # one or the other as appropriate but never mixes the two. Therefore we
20604 # have not corrected entries like `linux' and `xterm' that specify both.
20605 # If you see doubled characters from these, use the linux-nic and xterm-nic
20606 # entries that suppress ich/ich1. And upgrade to ncurses!
20609 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
20611 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
20612 # ECMA-48 standards are said to be almost identical, but are not the same
20613 # as X3.64 (though for practical purposes they are close supersets of it).
20615 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
20616 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
20617 # Coded Character Sets"), include your snail-mail address, and you should
20618 # receive the document in due course. Don't expect an email acknowledgement.
20620 # Related standards include "X3.4-1977: American National Standard Code for
20621 # Information Interchange" (the ASCII standard) and "X3.41.1974:
20622 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
20623 # American National Standard for Information Interchange." I believe (but
20624 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
20628 #### VT100/ANSI/ECMA-48
20630 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
20631 # and ECMA-48 Control Functions for Coded Character Sets.
20633 # Much of the content of this comment is adapted from a table prepared by
20634 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
20635 # discussion of some terminfo-related issues, and updates to capture ECMA-48
20636 # have been added. Control functions described in ECMA-48 only are tagged
20637 # with * after their names.
20639 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
20640 # sequences. In the main table, \E stands for an escape (\033) character,
20641 # SPC for space. Pn stands for a single numeric parameter to be inserted
20642 # in decimal ASCII. Ps stands for a list of such parameters separated by
20643 # semicolons. Parameter meanings for most parametrized sequences are
20644 # decribed in the notes.
20646 # Sequence Sequence Parameter or
20647 # Mnemonic Name Sequence Value Mode terminfo
20648 # -----------------------------------------------------------------------------
20649 # APC Applicatn Program Command \E _ - Delim -
20650 # BEL Bell * ^G - - bel
20651 # BPH Break Permitted Here * \E B - * -
20652 # BS Backpace * ^H - EF -
20653 # CAN Cancel * ^X - - - (A)
20654 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
20655 # CCH Cancel Previous Character \E T - - -
20656 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
20657 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
20658 # CMD Coding Method Delimiter * \E
20659 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
20660 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
20661 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
20662 # CSI Control Sequence Intro \E [ - Intro -
20663 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
20664 # CUB Cursor Backward \E [ Pn D 1 eF cub
20665 # CUD Cursor Down \E [ Pn B 1 eF cud
20666 # CUF Cursor Forward \E [ Pn C 1 eF cuf
20667 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
20668 # CUU Cursor Up \E [ Pn A 1 eF cuu
20669 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
20670 # DA Device Attributes \E [ Pn c 0 - -
20671 # DAQ Define Area Qualification \E [ Ps o 0 - -
20672 # DCH Delete Character \E [ Pn P 1 eF dch
20673 # DCS Device Control String \E P - Delim -
20674 # DL Delete Line \E [ Pn M 1 eF dl
20675 # DLE Data Link Escape * ^P - - -
20676 # DMI Disable Manual Input \E \ - Fs -
20677 # DSR Device Status Report \E [ Ps n 0 - - (I)
20678 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
20679 # EA Erase in Area \E [ Ps O 0 eF - (J)
20680 # ECH Erase Character \E [ Pn X 1 eF ech
20681 # ED Erase in Display \E [ Ps J 0 eF ed (J)
20682 # EF Erase in Field \E [ Ps N 0 eF -
20683 # EL Erase in Line \E [ Ps K 0 eF el (J)
20684 # EM End of Medium * ^Y - - -
20685 # EMI Enable Manual Input \E b Fs -
20686 # ENQ Enquire ^E - - -
20687 # EOT End Of Transmission ^D - * -
20688 # EPA End of Protected Area \E W - - - (K)
20689 # ESA End of Selected Area \E G - - -
20690 # ESC Escape ^[ - - -
20691 # ETB End Transmission Block ^W - - -
20692 # ETX End of Text ^C - - -
20693 # FF Form Feed ^L - - -
20694 # FNK Function Key * \E [ Pn SPC W - - -
20695 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
20696 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
20697 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
20698 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
20699 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
20700 # HPB Char Position Backward \E [ j 1 FE -
20701 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
20702 # HT Horizontal Tab * ^I - FE - (N)
20703 # HTJ Horz Tab w/Justification \E I - FE -
20704 # HTS Horizontal Tab Set \E H - FE hts
20705 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
20706 # ICH Insert Character \E [ Pn @ 1 eF ich
20707 # IDCS ID Device Control String \E [ SPC O - * -
20708 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
20709 # IL Insert Line \E [ Pn L 1 eF il
20710 # IND Index \E D - FE -
20711 # INT Interrupt \E a - Fs -
20712 # JFY Justify \E [ Ps SPC F 0 FE -
20713 # IS1 Info Separator #1 * ^_ - * -
20714 # IS2 Info Separator #1 * ^^ - * -
20715 # IS3 Info Separator #1 * ^] - * -
20716 # IS4 Info Separator #1 * ^\ - * -
20717 # LF Line Feed ^J - - -
20718 # LS1R Locking Shift Right 1 * \E ~ - - -
20719 # LS2 Locking Shift 2 * \E n - - -
20720 # LS2R Locking Shift Right 2 * \E } - - -
20721 # LS3 Locking Shift 3 * \E o - - -
20722 # LS3R Locking Shift Right 3 * \E | - - -
20723 # MC Media Copy \E [ Ps i 0 - - (S)
20724 # MW Message Waiting \E U - - -
20725 # NAK Negative Acknowledge * ^U - * -
20726 # NBH No Break Here * \E C - - -
20727 # NEL Next Line \E E - FE nel (D)
20728 # NP Next Page \E [ Pn U 1 eF -
20729 # NUL Null * ^@ - - -
20730 # OSC Operating System Command \E ] - Delim -
20731 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20732 # PFS Page Format Selection * \E Pn SPC J 0 - -
20733 # PLD Partial Line Down \E K - FE - (T)
20734 # PLU Partial Line Up \E L - FE - (U)
20735 # PM Privacy Message \E ^ - Delim -
20736 # PP Preceding Page \E [ Pn V 1 eF -
20737 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20738 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20739 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20740 # PTX Parallel Texts * \E [ \ - - -
20741 # PU1 Private Use 1 \E Q - - -
20742 # PU2 Private Use 2 \E R - - -
20743 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20744 # REP Repeat Char or Control \E [ Pn b 1 - rep
20745 # RI Reverse Index \E M - FE - (V)
20746 # RIS Reset to Initial State \E c - Fs -
20747 # RM Reset Mode * \E [ Ps l - - - (W)
20748 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20749 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20750 # SCI Single-Char Introducer \E Z - - -
20751 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20752 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20753 # SD Scroll Down \E [ Pn T 1 eF rin
20754 # SDS Start Directed String * \E [ Pn ] 1 - -
20755 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20756 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20757 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20758 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20759 # SI Shift In ^O - - - (P)
20760 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20761 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20762 # SLH Set Line Home * \E [ Pn SPC U - - -
20763 # SLL Set Line Limit * \E [ Pn SPC V - - -
20764 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20765 # SM Select Mode \E [ Ps h none - - (W)
20766 # SO Shift Out ^N - - - (Q)
20767 # SOH Start Of Heading * ^A - - -
20768 # SOS Start of String * \E X - - -
20769 # SPA Start of Protected Area \E V - - - (Z)
20770 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20771 # SPH Set Page Home * \E [ Ps SPC G - - -
20772 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20773 # SPL Set Page Limit * \E [ Ps SPC j - - -
20774 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20775 # SR Scroll Right \E [ Pn SPC A 1 eF -
20776 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20777 # SRS Start Reversed String * \E [ Ps [ 0 - -
20778 # SSA Start of Selected Area \E F - - -
20779 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20780 # SSW Set Space Width * \E [ Pn SPC [ none - -
20781 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20782 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20783 # ST String Terminator \E \ - Delim -
20784 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20785 # STS Set Transmit State \E S - - -
20786 # STX Start pf Text * ^B - - -
20787 # SU Scroll Up \E [ Pn S 1 eF indn
20788 # SUB Substitute * ^Z - - -
20789 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20790 # SYN Synchronous Idle * ^F - - -
20791 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20792 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20793 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20794 # TBC Tab Clear \E [ Ps g 0 FE tbc
20795 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20796 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20797 # TSS Thin Space Specification \E [ Pn SC E none FE -
20798 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20799 # VPB Line Position Backward * \E [ Pn k 1 FE -
20800 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20801 # VT Vertical Tabulation * ^K - FE -
20802 # VTS Vertical Tabulation Set \E J - FE -
20804 # ---------------------------------------------------------------------------
20808 # Some control characters are listed in the ECMA-48 standard without
20809 # being assigned functions relevant to terminal control there (they
20810 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20811 # here anyway for completeness.
20813 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20815 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20816 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20817 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20818 # preserved the CHA abbreviation.
20820 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20821 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20822 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20823 # CHT abbreviation.
20825 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20827 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20830 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20831 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20832 # 5 = clear all char tabs, 6 = clear all line tabs.
20834 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20835 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20836 # Position Absolute" but retains the HVP abbreviation.
20838 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20841 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20842 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20843 # DSR, 6 = request CPR response.
20845 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20846 # 1 = clear from beginning, 2 = clear.
20848 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20850 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20852 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20853 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20854 # Position Relative" but retains the HPR abbreviation.
20856 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20859 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20860 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20861 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20862 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20863 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20864 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20865 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20866 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20867 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20868 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20869 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20870 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20871 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20872 # 61-65 = variable highlights for ideograms.
20874 # (P) SI is also called LSO, Locking Shift Zero.
20876 # (Q) SI is also called LS1, Locking Shift One.
20878 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20879 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20880 # Absolute' but retains the VPA abbreviation.
20882 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20883 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20884 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20885 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20886 # 7 = start relay to secondary aux device.
20888 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20891 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20894 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20896 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20897 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20898 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20899 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20900 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20901 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20902 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20903 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20904 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20905 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20906 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20907 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20908 # from ECMA-48's 5th edition but are listed here for reference.
20910 # (X) Select Alternate Presentation Variants is used only for non-Latin
20913 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20915 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20918 # ---------------------------------------------------------------------------
20922 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20923 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20925 # Delim a Delimiter
20927 # x/y identifies a character by position in the ASCII table (column/row)
20929 # eF editor function (see explanation)
20931 # FE format effector (see explanation)
20933 # F is a Final character in
20934 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20935 # a control sequence (F from 4/0 to 7/14)
20937 # Gs is a graphic character appearing in strings (Gs ranges from
20938 # 2/0 to 7/14) in the ASCII table
20940 # Ce is a control represented as a single bit combination in the C1 set
20941 # of controls in an 8-bit character set
20943 # C0 the familiar set of 7-bit ASCII control characters
20945 # C1 roughly, the set of control chars available only in 8-bit systems.
20946 # This is too complicated to explain fully here, so read Jim Fleming's
20947 # article in the February 1983 BYTE, especially pages 214 through 224.
20949 # Fe is a Final character of a 2-character Escape sequence that has an
20950 # equivalent representation in an 8-bit environment as a Ce-type
20951 # (Fe ranges from 4/0 to 5/15)
20953 # Fs is a Final character of a 2-character Escape sequence that is
20954 # standardized internationally with identical representation in 7-bit
20955 # and 8-bit environments and is independent of the currently
20956 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
20958 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
20961 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
20964 # Pn is a numeric parameter in a control sequence, a string of zero or
20965 # more characters ranging from 3/0 to 3/9 in the ASCII table
20967 # Ps is a variable number of selective parameters in a control sequence
20968 # with each selective parameter separated from the other by the code
20969 # 3/11 (which usually represents a semicolon); Ps ranges from
20970 # 3/0 to 3/9 and includes 3/11
20972 # * Not relevant to terminal control, listed for completeness only.
20974 # Format Effectors versus Editor Functions
20976 # A format effector specifies how following output is to be displayed.
20977 # An editor function allows you to modify the display. Informally
20978 # format effectors may be destructive; format effectors should not be.
20980 # For instance, a format effector that moves the "active position" (the
20981 # cursor or equivalent) one space to the left would be useful when you want to
20982 # create an overstrike, a compound character made of two standard characters
20983 # overlaid. Control-H, the Backspace character, is actually supposed to be a
20984 # format effector, so you can do this. But many systems use it in a
20985 # nonstandard fashion, as an editor function, deleting the character to the
20986 # left of the cursor and moving the cursor left. When Control-H is assumed to
20987 # be an editor function, you cannot predict whether its use will create an
20988 # overstrike unless you also know whether the output device is in an "insert
20989 # mode" or an "overwrite mode". When Control-H is used as a format effector,
20990 # its effect can always be predicted. The familiar characters carriage
20991 # return, linefeed, formfeed, etc., are defined as format effectors.
20993 # NOTES ON THE DEC VT100 IMPLEMENTATION
20995 # Control sequences implemented in the VT100 are as follows:
20997 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
20998 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21000 # plus several private DEC commands.
21002 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21004 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21005 # Erase from beginning of line to cursor Esc [ 1 K
21006 # Erase line containing cursor Esc [ 2 K
21007 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21008 # Erase from beginning of screen to cursor Esc [ 1 J
21009 # Erase entire screen Esc [ 2 J
21011 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21012 # Esc [ 2 J, but this is wrong; the default is 0.
21014 # The VT100 responds to receiving the DA (Device Attributes) control
21016 # Esc [ c (or Esc [ 0 c)
21018 # by transmitting the sequence
21022 # where Ps is a character that describes installed options.
21024 # The VT100's cursor location can be read with the DSR (Device Status
21029 # The VT100 reports by transmitting the CPR sequence
21033 # where Pl is the line number and Pc is the column number (in decimal).
21035 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21039 # Here is a description of the color and attribute controls supported in the
21040 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21041 # terminal emulators for Intel boxes obey these. They are a proper subset
21042 # of the ECMA-48 escapes.
21044 # 0 all attributes off
21045 # 1 foreground bright
21047 # 5 blink on/background bright (not reliable with brown)
21049 # 8 set blank (non-display)
21050 # 10 set primary font
21051 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21052 # 12 set second alternate font (on PCs, display IBM high-half chars)
21054 # Color attribute sets
21055 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21056 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21057 # Bright black becomes gray. Bright brown becomes yellow,
21058 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21060 # * If the 5 attribute is on and you set a background color (40-47) it is
21061 # supposed to enable bright background.
21063 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21064 # when you try to set a "bright brown" (yellow) background with attribute
21065 # 5 (you get a blinking yellow foreground instead). A few displays
21066 # (including the System V console) support an attribute 6 that undoes this
21067 # braindamage (this is required by iBCS2).
21069 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21070 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21073 #### Intel Binary Compatibility Standard
21075 # For comparison, here are the capabilities implied by the Intel Binary
21076 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21077 # These recommendations are optional. IBCS2 allows the leading escape to
21078 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21079 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21080 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21081 # terminfo entry are followed with the corresponding capability in parens:
21083 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21084 # CSI 2h lock keyboard
21085 # CSI 2i send screen as input
21086 # CSI 2l unlock keyboard
21087 # CSI 6m enable background color intensity
21088 # CSI <0-2>c reserved
21089 # CSI <0-59>m select graphic rendition
21090 # CSI <n>;<m>H (cup) cursor to line n and column m
21091 # CSI <n>;<m>f cursor to line n and column m
21092 # CSI <n>@ (ich) insert characters
21093 # CSI <n>A (cuu) cursor up n lines
21094 # CSI <n>B (cud) cursor down n lines
21095 # CSI <n>C (cuu) cursor right n characters
21096 # CSI <n>D (cud) cursor left n characters
21097 # CSI <n>E cursor down n lines and in first column
21098 # CSI <n>F cursor up n lines and in first column
21099 # CSI <n>G (hpa) position cursor at column n-1
21100 # CSI <n>J (ed) erase in display
21101 # CSI <n>K (el) erase in line
21102 # CSI <n>L (il) insert line(s)
21103 # CSI <n>P (dch) delete characters
21104 # CSI <n>S (indn) scroll up n lines
21105 # CSI <n>T (rin) scroll down n lines
21106 # CSI <n>X (ech) erase characters
21107 # CSI <n>Z (cbt) back up n tab stops
21108 # CSI <n>` cursor to column n on line
21109 # CSI <n>a (cuu) cursor right n characters
21110 # CSI <n>d (vpa) cursor to line n
21111 # CSI <n>e cursor down n lines and in first column
21112 # CSI <n>g (cbt) clear all tabs
21113 # CSI <n>z make virtual terminal n active
21114 # CSI ?7h (smam) turn automargin on
21115 # CSI ?7l (rmam) turn automargin off
21116 # CSI s save cursor position
21117 # CSI u restore cursor position to saved value
21118 # CSI =<c>A set overscan color
21119 # CSI =<c>F set normal foreground color
21120 # CSI =<c>G set normal background color
21121 # CSI =<c>H set reverse foreground color
21122 # CSI =<c>I set reverse foreground color
21123 # CSI =<c>J set graphic foreground color
21124 # CSI =<c>K set graphic foreground color
21125 # CSI =<n>g (dispc) display n from alternate graphics character set
21126 # CSI =<p>;<d>B set bell parameters
21127 # CSI =<s>;<e>C set cursor parameters
21128 # CSI =<x>D enable/disable intensity of background color
21129 # CSI =<x>E set/clear blink vs. bold background
21130 # CSI 7 (sc) (sc) save cursor position
21131 # CSI 8 (rc) (rc) restore cursor position to saved value
21132 # CSI H (hts) (hts) set tab stop
21133 # CSI Q<n><string> define function key string
21134 # (string must begin and end with delimiter char)
21135 # CSI c (clear) clear screen
21137 # The lack of any specification for attributes in SGR (among other things)
21138 # makes this a wretchedly weak standard. The table above is literally
21139 # everything iBSC2 has to say about terminal escape sequences; there is
21140 # no further discussion of their meaning or how to set the parameters
21141 # in these sequences at all.
21144 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21146 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21147 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21148 # with the extension names chosen for compatibility with the termcap names
21149 # assigned in System V terminfo. There are some variant extension sets out
21150 # there. We try to describe them here.
21152 # XENIX extensions:
21154 # The XENIX extensions include a set of function-key capabilities as follows:
21156 # code XENIX variable name terminfo name name clashes?
21157 # ---- ------------------- ------------- -----------------------
21159 # CR key_char_right
21160 # CW key_change_window create_window
21162 # HM key_home khome
21164 # LD key_delete_line kdl1
21165 # LF key_linefeed label_off
21166 # NU key_next_unlocked_cell
21167 # PD key_page_down knp
21169 # PN start_print mc5
21171 # PS stop_print mc4
21172 # PU key_page_up kpp pulse
21173 # RC key_recalc remove_clock
21174 # RF key_toggle_ref req_for_input
21175 # RT key_return kent
21176 # UP key_up_arrow kcuu1 parm_up_cursor
21178 # WR key_word_right
21180 # The XENIX extensions also include the following character-set and highlight
21183 # XENIX terminfo function
21184 # ----- -------- ------------------------------
21185 # GS smacs start alternate character set
21186 # GE rmacs end alternate character set
21187 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21188 # bo blink begin blink (not used in /etc/termcap)
21189 # be end blink (not used in /etc/termcap)
21190 # bb blink glitch (not used in /etc/termcap)
21191 # it dim begin dim (not used in /etc/termcap)
21192 # ie end dim (not used in /etc/termcap)
21193 # ig dim glitch (not used in /etc/termcap)
21195 # Finally, XENIX also used the following forms-drawing capabilities:
21197 # single double type ASCII approximation
21198 # ------ ------ ------------- -------------------
21199 # GV Gv vertical line |
21200 # GH Gv horizontal line - _
21201 # G1 G5 top right corner _ |
21202 # G2 G6 top left corner |
21203 # G3 G7 bottom left corner |_
21204 # G4 G8 bottom right corner _|
21205 # GD Gd down-tick character T
21206 # GL Gl left-tick character -|
21207 # GR Gr right-tick character |-
21208 # GC Gc middle intersection -|-
21209 # GU Gu up-tick character _|_
21211 # These were invented to take advantage of the IBM PC ROM character set. One
21212 # can compose an acsc string from the single-width characters as follows
21213 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21214 # When translating a termcap file, ncurses tic will do this automatically.
21215 # The double forms characters don't fit the SVr4 terminfo model.
21219 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21220 # nonstandard capabilities. Its signature is the KM capability, used to name
21221 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21222 # set. Comments in the original, and a little cross-checking with other AT&T
21223 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21224 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21225 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21226 # cursor invisible), and CV=:ve: (make cursor normal).
21230 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21231 # have the System V capabilities up to SVr1 level. After that, it supports
21232 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21233 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21234 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21235 # HP binary format incompatible with SVr4's.
21239 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21240 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21241 # capabilities following prtr_non with the following special capabilties:
21242 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21243 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21244 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21245 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21246 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21247 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21248 # correspond to acsc chars, here is the mapping:
21250 # box1[0] = ACS_ULCORNER
21251 # box1[1] = ACS_HLINE
21252 # box1[2] = ACS_URCORNER
21253 # box1[3] = ACS_VLINE
21254 # box1[4] = ACS_LRCORNER
21255 # box1[5] = ACS_LLCORNER
21256 # box1[6] = ACS_TTEE
21257 # box1[7] = ACS_RTEE
21258 # box1[8] = ACS_BTEE
21259 # box1[9] = ACS_LTEE
21260 # box1[10] = ACS_PLUS
21262 # The box2 characters are the double-line versions of these forms graphics.
21263 # The AIX binary terminfo format is incompatible with SVr4's.
21265 # Iris console extensions:
21267 # HS is half-intensity start; HE is half-intensity end
21268 # CT is color terminal type (for Curses & rogue)
21269 # CP is color change escape sequence
21270 # CZ are color names (for Curses & rogue)
21272 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21276 # There is a set of extended termcaps associated with something
21277 # called the "Terminal Control" or TC package created by MainStream Systems,
21278 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21279 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21280 # that flags color terminals.
21282 ######## CHANGE HISTORY
21284 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21285 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21286 # maintained by Eric S. Raymond as part of the ncurses project.
21288 # This file contains all the capability information present in John Kunze's
21289 # last version of the termcap master file, except as noted in the change
21290 # comments at end of file. Some information about very ancient obsolete
21291 # capabilities has been moved to comments. Some all-numeric names of older
21292 # terminals have been retired.
21294 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21295 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21296 # used by BSD curses.
21298 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21299 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21300 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21301 # making perfectly synchronized mistakes which I then failed to catch by
21302 # eyeball, the translation was correct and perfectly information-preserving.
21304 # Major version number bumps correspond to major version changes in ncurses.
21306 # Here is a log of the changes since then:
21308 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21309 # * First terminfo master translated from 8.3.
21310 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21311 # * Replaced Wyse entries with updated entries supplied by vendor.
21313 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21314 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21315 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21316 # * Better XENIX keycap translation. Describe TC termcaps.
21317 # * Contact and history info supplied by Qume.
21318 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21319 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21320 # * Added information on X3.64 and VT100 standard escape sequences.
21321 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21322 # * Added a correct X11R6 xterm entry.
21323 # * Fixed terminfo translations of padding.
21324 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21325 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21326 # * Added u6/u7/u8/u9 capabilities.
21327 # * Added PCVT entry.
21328 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21329 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21330 # to use reverse-video standout so Emacs will look right.
21331 # * Added el1 capability to ansi.
21332 # * Added smacs/rmacs to ansi.sys.
21334 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21335 # * New mt70 entry.
21336 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21337 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21338 # smartvid & smarterm, ampex 175 & 219 & 232,
21339 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21340 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21341 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21342 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21343 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21344 # * Restored the old minimal-ansi entry, luna needs it.
21345 # * Fixed some incorrect ip and proportional-padding translations.
21346 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21347 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21348 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21349 # to force a particular height.
21350 # * Added beehive4 and reorganized other Harris entries.
21351 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21352 # * Merged in DEC's official entries for its terminals. The only old
21353 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21354 # * Replaced the translated BBN Bitgraph entries with purpose-built
21355 # ones from AT&T's SVr3.
21356 # * Replaced the AT&T entries with AT&T's official terminfos.
21357 # * Added teleray 16, vc415, cops10.
21358 # * Merged in many individual capabilities from SCO terminfo files.
21359 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21361 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21362 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21363 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21364 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21365 # simterm, citoh and variants.
21366 # * Replaced sol entry with sol1 and sol2.
21367 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21368 # terminfo entries.
21369 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21370 # and dg200 entries using caps from from SCO.
21371 # * Added the usual set of function-key mappings to ANSI entry.
21372 # * Corrected xterm's function-key capabilities.
21373 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21374 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21375 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21376 # * Fix in xterm entry, get the arrow keys right.
21377 # * Change some \0 escapes to \200.
21378 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21379 # * Added apple (Videx card), adm1a, oadm31.
21380 # * Fixed malformed ampex csr.
21381 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21382 # * Changed mandatory to advisory padding in many entries.
21383 # * Replaced HP entries up to hpsub with purpose-built ones.
21384 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21385 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21386 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21387 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21388 # more efficient (but the entries otherwise identical).
21389 # * Added dg211 from Shuford archive.
21390 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21391 # adm42-nl, pc52, gs6300, xerox820, uts30.
21392 # * Pull SCO's padding into vi200 entry.
21393 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21394 # entries merged in from SCO's descriptions.
21395 # * Fixed old-style prefix padding on zen50, h1500.
21396 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21397 # entry from SCO's description.
21398 # * Reorganized the special entries.
21399 # * Added lm#0 to cbunix and virtual entries.
21401 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21402 # * Restored cdc456tst.
21403 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21404 # * Added megatek, beacon, microkit.
21405 # * Freeze for ncurses-1.9 release.
21406 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21407 # * Added historical data for TAB.
21408 # * Comment fixes from David MacKenzie.
21409 # * Added the new BSDI pc3 entry.
21410 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21411 # * A change in the tic -C logic now ensures that all entries in
21412 # the termcap translation will fit in < 1024 bytes.
21413 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21414 # from GNU termcap file. This merges in all their local information.
21415 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21416 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21417 # * Added warnings about entries with long translations (restoring
21418 # all the GNU termcaps pushes a few over the edge).
21419 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21420 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21421 # number of long (> 1024) termcap translations back to 0.
21423 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21424 # * Added kf13-kf20 to Linux entry.
21425 # * Regularize Prime terminal names.
21426 # * Historical data on Synertek.
21427 # * Freeze for ncurses-1.9.1.
21428 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21429 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21430 # * Eliminate whitespace in short name fields, this tanks some scripts.
21431 # * Name field changes to shorten some long entries.
21432 # * Termcap translation now automatically generates empty rmir/smir
21433 # when ich1/ich is present (copes with an ancient vi bug).
21434 # * Added `screen' entries from FSF's screen-3.6.2.
21435 # * Added linux-nic and xterm-nic entries.
21436 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21437 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21438 # eliminating some special-case code in ncurses.
21440 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21441 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21442 # that captures everything unique from it.
21443 # * Added reorder script generator.
21444 # * Freeze for ncurses 1.9.2 release.
21445 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21446 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21447 # * Added Olaf Siebert's corrections for adm12.
21448 # * ansi-pc-color now includes the colors and pairs caps, so that
21449 # entries which use it will inherit them automatically.
21450 # * The linux entry can now recognize the center (keypad 5) key.
21451 # * Removed some junk that found its way into Linux acsc.
21453 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21454 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21455 # * xterm doesn't try to use application keypad mode any more.
21456 # * Freeze for ncurses-1.9.3 release.
21457 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21458 # * Added corrected sun entry from vendor.
21459 # * Added csr capability to linux entry.
21460 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21461 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21462 # * Some commented-out caps in long entries come back in, my code
21463 # for computing string-table lengths had a bug in it.
21464 # * pcansi series modified to fit comm-program reality better.
21465 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
21466 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
21467 # * Correct some bad aliases in the pcansi series
21468 # * Added entry for QNX console.
21469 # * Clean up duplicate long names for use with 4.4 library.
21470 # * Change vt100 standout to be normal reverse vide, not bright reverse;
21471 # this makes the Emacs status line look better.
21472 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
21473 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
21474 # * Minor surgery, mostly on name strings, to shorten termcap version.
21476 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
21477 # * Added dec-vt100 for use with the EWAN emulator.
21478 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21479 # * Freeze for 1.9.5 alpha release.
21480 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
21481 # * Changed xterm lines to 24, the X11R6 default.
21482 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
21483 # * Added 7 newly discovered, undocumented acsc characters to linux
21484 # entry (the pryz{|} characters).
21485 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
21486 # * Correct two typos in the xterm entries introduced in 9.9.1.
21487 # * I finally figured out how to translate ko capabilities. Done.
21488 # * Added tvi921 entries from Tim Theisen.
21489 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
21490 # * Removed mystery tec entry, it was neither interesting nor useful.
21491 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
21492 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
21493 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
21494 # by making them relative to use capabilities
21495 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
21496 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
21497 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
21499 # * Translate all home=\E[;H capabilities to home=\E[H, they're
21501 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
21502 # vt100 and ANSI-like terminals.
21503 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
21504 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
21505 # does this now, too.
21506 # * fviewpoint is gone, it duplicated screwpoint.
21507 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
21508 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
21509 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
21510 # The UW vi50 replaces the old one, which becomes vi50adm,
21511 # * No more embedded commas in name fields.
21513 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
21514 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
21515 # * Introduced klone+* entries for describing Intel-console behavior.
21516 # * Linux kbs is default-mapped to delete for some brain-dead reason.
21517 # * -nsl -> -ns. The -pp syntax is obsolete.
21518 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
21519 # * Make xterm entry do application-keypad mode again. I got complaints
21520 # that it was messing up someone's 3270 emulator.
21521 # * Added some longname fields in order to avoid warning messages from
21522 # older tic implementations.
21523 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
21524 # it! (This gives us pi, greater than, less than, and a few more.)
21525 # * Freeze for ncurses-1.9.6 release.
21526 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
21527 # * Add xon to a number of console entries, they're memory-mapped and
21528 # don't need padding.
21529 # * Correct the use dependencies in the ansi series.
21530 # * Hand-translate more XENIX capabilities.
21531 # * Added hpterm entry for HP's X terminal emulator.
21532 # * Added aixterm entries.
21533 # * Shortened four names so everything fits in 14 chars.
21535 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
21536 # * Added ibcs2 entry and info on iBCS2 standard.
21537 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
21538 # * We can handle the HP meml/memu capability now.
21539 # * Added smacs to klone entries, just as documentation.
21540 # * Carrected ansi.sys and cit-500 entries.
21541 # * Added z39, vt320-k311, v220c, and avatar entries.
21542 # * Make pcansi use the ansi.sys invis capability.
21543 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
21544 # tvi925, tvi950, dt80, ncr7900i, h19.
21545 # * X3.64 has been withdrawn, change some references.
21546 # * Removed function keys from ansi-m entry.
21547 # * Corrected ansi.sys entry.
21548 # * Freeze for ncurses-1.9.7 release.
21549 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
21550 # * Added rmam/smam capabilities to many entries based on init strings.
21551 # * Added correct hpa/vpa to linux.
21552 # * Reduced several entries relative to vt52.
21553 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
21554 # * Exiled some utterly unidentifiable custom and homebrew types to the
21555 # UFO file; also, obsolete small-screen hardware; also, entries which
21556 # look flat-out incorrect, garbled, or redundant. These include the
21557 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
21558 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
21559 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
21560 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
21561 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
21562 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
21563 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
21564 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
21565 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
21566 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
21567 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
21568 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
21569 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
21570 # * Corrected pcvt25h as suggested by Brian C. Grayson
21571 # <bgrayson@pine.ece.utexas.edu>.
21572 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
21573 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
21574 # * Added kent=\EOM to xterm entry.
21576 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
21577 # * Corrected gigi entry.
21578 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
21579 # bad hpa/vpa capabilities.
21580 # * Corrected flash strings to have a uniform delay of .2 sec. No
21581 # more speed-dependent NUL-padding!
21582 # * terminfo capabilities in comments bracketed with <>.
21583 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
21584 # * Replaced pcvt with the 3.31 pcvt entries.
21585 # * Freeze for 1.9.7a.
21586 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
21587 # * Added emu entry from the X11R6 contrib tape sources.
21589 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
21590 # * Improved iris-ansi and sun entries.
21591 # * More flash string improvements.
21592 # * Corrected wy160 & wy160 as suggested by Robert Dunn
21593 # * Added dim to at386.
21594 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
21595 # he's ready to start using the termcap generated from this one.
21596 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
21597 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
21598 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
21599 # att610, att620, att630,
21600 # * Changed hazeltine name prefix from h to hz.
21601 # * Sent t500 to the UFI file.
21602 # * I think we've sucked all the juice out of BSDI's termcap file now.
21603 # * Freeze for ncurses 1.9.8 release
21604 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
21605 # * Unfreeze, linux kbs needed to be fixed.
21606 # * Tim Theisen pinned down a bug in the DMD firmware.
21607 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
21608 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
21609 # (The broken ones had been shadowed by sgr.)
21610 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
21611 # * Added documentation on ECMA-48 standard.
21612 # * New Amiga entry.
21613 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
21614 # * More ECMA-48 stuff
21615 # * Corrected typo in minix entry, added pc-minix.
21616 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
21617 # * Added rxvt entry.
21618 # * Added 1.3.x color-change capabilities to linux entry.
21619 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
21620 # * Corrected rxvt entry khome/kend.
21621 # * Corrected linux color change capabilities.
21622 # * NeXT entries from Dave Wetzel.
21623 # * Cleaned up if and rf file names (all in /usr/share now).
21624 # * Changed linux op capability to avoid screwing up a background color
21625 # pair set by setterm.
21626 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
21627 # * Added xterm-sun.
21628 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
21631 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
21632 # * Another sweep through the Shuford archive looking for new info.
21633 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
21634 # * Added st52 from Per Persson.
21635 # * Added eterm from the GNU Emacs 19.30 distribution.
21636 # * Freeze for 1.9.9.
21637 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
21638 # * FreeBSD console entries from Andrew Chernov.
21639 # * Removed duplicate Atari st52 name.
21640 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
21641 # * xterm doesn't actually have ACS_BLOCK.
21642 # * Change klone+color setf/setb to simpler forms that can be
21643 # translated into termcap.
21645 # * Removed mechanically-generated junk capabilities from cons* entries.
21646 # * Added color support to bsdos.
21647 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
21648 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
21649 # * Created ecma+color, linux can use it. Also added ech to linux.
21650 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
21651 # * Add descriptions to FreeBSD console entries. Also shorten
21652 # some aliases to <= 14 chars for portability.
21653 # * Added x68k console
21654 # * Added OTbs to several VT-series entries.
21655 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
21656 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21657 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
21658 # * kterm correction due to Kenji Rikitake.
21659 # * ACS correction in vt320-kll due to Phillippe De Muyter.
21660 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
21661 # * Sun console entry correction from J.T. Conklin.
21662 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21663 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
21664 # * Added smul to linux entry (we never noticed it was missing
21665 # because of sgr!).
21666 # * Added rmln to hp+labels (deduced from other HP entries).
21667 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
21668 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
21669 # * Corrected vt220 acsc.
21670 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21671 # this corresponds to reality and helps prevent some tic warnings.
21672 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
21673 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
21674 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
21675 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
21676 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
21677 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
21678 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
21679 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
21680 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
21681 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
21682 # ifmr, v3220, wy100q, tandem653, ibmaed.
21683 # * Added DWK terminal description.
21684 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
21685 # * Many entries now have highlights inherited from adm+sgr.
21686 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
21687 # * xtitle and xtitle-twm enable access to the X status line.
21688 # * Added linux-1.3.6 color palette caps in conventional format.
21689 # * Added adm1178 terminal.
21690 # * Move fos and apollo terminals to obsolete category.
21691 # * Aha! The BRL terminals file told us what the Iris extensions mean.
21692 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
21693 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
21695 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
21696 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
21697 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
21698 # * Corrected, from BRL termcap file: vi50.
21699 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
21700 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
21701 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
21702 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
21703 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
21704 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
21705 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
21706 # * Paired-attribute fixes to various terminals.
21707 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
21708 # * xterm entry corrections from Thomas Dickey.
21709 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
21710 # * Added t916 entry, translated from a termcap in SCO's support area.
21711 # * New qnx entry from Michael Hunter.
21712 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
21713 # * Added hpex2 from Ville Sulko.
21714 # * Fixed a bug that ran the qnx and pcvtXX together.
21715 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
21716 # * Added dtterm entry from Solaris CDE.
21717 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
21718 # * corrected pairs#8 typo in dtterm entry.
21720 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21721 # * updated xterm entry to cover 3.1.2E's new features.
21722 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21723 # * Added new minix entry
21724 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21725 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21726 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21727 # * Added Prism entries and kt7ix.
21728 # * Caution notes about EWAN and tabset files.
21729 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21730 # * Added acsc/rmacs/smacs to vt52.
21731 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21732 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21733 # added technical corrections to avoid warning messages.
21734 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21735 # * Added rmso=\E[27m in Linux entry.
21736 # * Added koi8-r support for Linux console.
21737 # * Replace xterm entries with canonical ones from XFree86 3.2.
21738 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21739 # * Added color_xterm from Jacob Mandelson
21740 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21741 # * Back off the xterm entry to use r6 as a base.
21742 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21743 # * Added dec-vt220 at Adrian Garside's request.
21745 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21747 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21748 # * Minor corrections to xterm entries.
21749 # * Replaced EWAN telnet entry.
21750 # * Dropped the reorder script generator. It was a fossil.
21751 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21752 # * Replaced minitel-2 entry.
21753 # * Added MGR, ansi-nt.
21754 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21755 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21756 # the 4.4BSD Lite2 file.
21758 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21759 # * Use setaf/setab consistently with SVr4.
21760 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21761 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21762 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21763 # * add xterm-16color, for XFree86 3.3
21764 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21765 # * correct typo in emu
21766 # * correct typo in vt102-w (Robert Wuest)
21767 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21768 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21769 # * remove ech capability from rxvt (it does the wrong thing)
21770 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21771 # * remove spurious newlines from several entries (hp+color, wy50,
21772 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21774 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21775 # * correct rmso capability of wy50-mc
21776 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21777 # * add cbt to xterm-xf86-v32
21778 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21779 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21780 # other capabilities not in xterm-r6.
21781 # * remove alternate character set from kterm entry.
21782 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21783 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21784 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21785 # * add xterm-8bit entry.
21786 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21787 # * repair several places where early version of tic replaced \, with \\\,
21788 # * make acsc entries canonical form (sorted, uniq).
21789 # * modify acsc entries for linux, linux-koi8
21790 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21791 # * add color, mouse support to kterm.
21792 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21793 # * correct wy120 smxon/tbc capabilities which were stuck together.
21794 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21795 # * add entry for xterm-xf86-v39t
21796 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21797 # * add u8,u9 to sun-il description
21798 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21799 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21801 # * add hds200 description (Walter Skorski)
21802 # * add EMX 0.9b descriptions
21803 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21804 # * rename xhpterm back to hpterm.
21805 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21806 # * change initc in linux-c-nc to use 0..1000 range.
21807 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21808 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21809 # * add sgr0 for rxvt.
21810 # * remove bogus smacs/rmacs from EMX descriptions.
21811 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
21812 # * revised entry for att7300
21813 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
21814 # * use \0 rather than \200.
21815 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21816 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21817 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21818 # * rename xterm-xf86-v39t to xterm-xf86-v40
21819 # * remove bold/underline from sun console entries since they're not
21821 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21822 # * add beterm entry (Fred Fish)
21823 # * add irix-color/xwsh entry.
21824 # * turn ncv off for linux.
21825 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21826 # * set ncv for FreeBSD console (treat colors with reverse specially).
21827 # * remove sgr string from qnx based on report by Xiaodan Tang
21828 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21829 # * remove spurious commas from descriptions
21830 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21831 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21832 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21833 # apparently based on cp-866).
21835 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21837 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21838 # * Replaced minitel-2 entry.
21839 # * Added MGR, ansi-nt.
21840 # * Minor corrections to xterm entries.
21841 # * Replaced EWAN telnet entry.
21842 # * Dropped the reorder script generator. It was a fossil.
21843 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21844 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21845 # the 4.4BSD Lite2 file.
21846 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21847 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21848 # * Updated iris-ansi; corrected vt102-w.
21849 # * Switch base xterm entry to 3.3 level.
21850 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21852 # * Removed rmir/smir from tv92B.
21854 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21855 # * add hds200 description (Walter Skorski)
21856 # * add beterm entry (Fred Fish)
21857 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21858 # iris-color entries.
21859 # * add emx entries.
21860 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
21861 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
21863 # * remove sgr string from qnx based on report by Xiaodan Tang
21864 # * Added u8/u9, removed rmul/smul from sun-il.
21865 # * 4.2 tic displays \0 rather than \200.
21866 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21867 # apparently based on cp-866).
21868 # * Merged in Pavel Roskin's acsc for linux-koi8
21869 # * Corrected some erroneous \\'s to \.
21870 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21871 # * II -> ii in pcvtXX, screen, xterm.
21872 # * Removed \n chars following ANSI escapes in sgr & friends.
21873 # * Updated Wyse entries.
21874 # * h19 corrections from Tim Pierce.
21875 # * Noted that the dm2500 has both ich and smir.
21876 # * added pccons for the Alpha under OSF/1.
21877 # * Added Sony NEWS workstation entries and cit101e-rv.
21878 # * Reverted `amiga'; to Kent Polk's version, as I'm told
21879 # the Verkuil entry messes up with Amiga Telnet.
21880 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
21881 # * Corrected attributions in 10.2.0 release notes.
21882 # * Scanned the Shuford archive for new terminfos and information.
21883 # * Removed sgr from qnx entry (Thomas Dickey).
21884 # * Added entries for ICL and Kokusai Data Systems terminals.
21885 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
21886 # * Incorporated att700 from the Boundless Technology FTP site.
21887 # * Miscellaneous contact-address and Web-page updates.
21889 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
21892 # * add nxterm and xterm-color terminfo description (request by Cristian
21893 # Gafton <gafton@redhat.com>).
21894 # * modify rxvt terminfo description to clear alternate screen before
21895 # switching back to normal screen, for compatibility with applications
21896 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21897 # * modify linux terminfo description to reset color palette (reported
21898 # by Telford Tendys <telford@eng.uts.edu.au>).
21901 # * merge changes from current XFree86 xterm terminfo descriptions.
21904 # * Added minitel1 entries from Alexander Montaron.
21905 # * Added qnxt2 from Federico Bianchi.
21906 # * Added arm100 terminfo entries from Dave Millen.
21909 # * Added ncsa telnet entries from Francesco Potorti
21912 # * modify ncsa telnet entry to reflect color, other capabilities based on
21913 # examination of the source code - T.Dickey.
21916 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
21919 # * Added Francesco Potorti's tuned Wyse 99 entries.
21920 # * dtterm enacs correction from Alexander V. Lukyanov.
21921 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
21922 # * correct a typo in icl6404 entry.
21923 # * add xtermm and xtermc
21926 # * format most %'char' sequences to %{number}
21927 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
21928 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
21931 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
21932 # * correct initialization string in xterm-r5, add misc other features
21933 # to correspond with xterm patch 84 - TD
21936 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
21937 # * add Mathew Vernon's mach console entries
21938 # * corrections for ncsa function-keys (report by Larry Virden)
21941 # * change linux to use ncv#2, since underline does not work with color - TD
21944 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
21945 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21946 # application modes, change kent to use the correct keypad code - TD
21949 # * add entry for Tera Term - TD
21952 # * minor improvements for teraterm entry - TD
21953 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
21954 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
21957 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
21958 # xterm and ncsa entries by removing the unneeded ones. Note that
21959 # some entries will return kend & khome versus kslt and kfnd, for
21960 # PC-style keyboards versus strict vt220 compatiblity - TD
21963 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
21965 # * add 'crt' entry - TD
21966 # * correct typos in 'linux-c' entry - TD
21969 # * update entries for BSD/OS console to use klone+sgr and klone+color
21970 # (Jeffrey C Honig)
21973 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
21976 # * add linux-lat, from RedHat patches to ncurses 4.2
21979 # * add complete set of default function-key definitions for scoansi - TD.
21982 # * add cnorm, cvvis for Linux 2.2 kernels
21985 # * add kmous to xterm-r5 -TD
21986 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
21987 # parent "use" clause -TD
21990 # * corrected cnorm, added el1 in 'screen' description -TD
21993 # * add ms-vt100 -TD
21996 # * corrections to beterm entry -TD
21999 # * add cygwin entry -TD
22002 # * minor corrections for beterm entry -TD
22005 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22008 # * add amiga-8bit entry
22009 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22010 # rcons-color, based on
22011 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22012 # * add alias for iris-ansi-net
22015 # * corrected scoansi entry's acsc, some function keys, add color -TD
22018 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22019 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22020 # key mapping, leaving Potorti's entries more like he named them -TD
22021 # * remove enter/exit am-mode from cygwin -TD
22024 # * correct typos in several entries (missing '[' from CSI):
22025 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22026 # strings for avt-ns -TD
22027 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22030 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22031 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22032 # * add xterm-88color and xterm-256color -TD
22035 # * add "obsolete" termcap strings -TD
22036 # * add kvt and gnome entries -TD
22039 # * correct cup string for regent100 -TD
22042 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22043 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22044 # * change OTrs capabilities to rs2 -TD
22045 # * add obsolete and extended capabilities to 'screen' -TD
22048 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22050 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22051 # and adding kcbt -TD
22054 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22055 # nonstandard resource settings -TD
22058 # * minor fixes for xterm-*, based on Debian #58530 -TD
22061 # * add several terminal types from esr's "11.0", as well as comments.
22062 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22063 # vt220-8bit, vt220-old, wy85-8bit
22066 # * add several terminal types from esr's "11.0.1" (ansi-*).
22067 # * update OTxx capabilities for changes on 2000/3/4.
22068 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22071 # * move screen's AX extension to ecma+color, modify several entries to
22072 # use that, adjusting ncv as needed -TD
22075 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22076 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22077 # in esr's version.
22080 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22081 # * correct color definition for ibm3164, make minor changes to other
22082 # IBM terminal definitions based on recent terminfo descriptions -TD
22085 # * add mgterm, from NetBSD -TD
22086 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22087 # * change cons25w to use rs2 for reset rather than rs1 -TD
22088 # * add rc/sc to aixterm based on manpage -TD
22091 # * remove ncv from xterm-16color, xterm-256color
22094 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22097 # * add Eterm (Michael Jennings)
22100 # * add amiga-vnc entry.
22103 # * correct description of Top Gun Telnet.
22104 # * add kterm-color
22107 # * add qansi* entries from QNX ftp site.
22110 # * add Matrix Orbital entries by Eric Z. Ayers).
22111 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22115 # * add S0, E0 extensions to screen's entry -TD
22118 # * several corrections based on tic's new parameter-checking code -TD
22119 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22120 # bracketing sequences that reset video attributes (\E8 would restore
22124 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22127 # * improved scoansi, based on SCO man-page, and testing console,
22128 # scoterm with tack -TD
22131 # * modify kterm to use acsc via SCS controls.
22134 # * screen 3.9.8 allows xterm mouse controls to pass-through
22137 # * remove spurious "%|" from some xterm entries.
22140 # * modify 'screen' khome/kend to match screen 3.09.08
22141 # * add examples of 'screen' customization (screen.xterm-xfree86,
22142 # screen.xterm-r6, screen.teraterm) -TD
22145 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22146 # * add "Apple_Terminal" entries -Benjamin Sittler
22147 # * remove time-delays from "Apple_Terminal" entries -TD
22148 # * make sgr entries time-delays consistent with individual caps -TD
22151 # * corrected/updated screen.xterm-xfree86
22154 # * ELKS descriptions, from Federico Bianchi
22155 # * add u6 (CSR) to Eterm (Michael Jennings).
22158 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22159 # tic which handles names no longer than 14 characters. Add
22160 # corresponding descriptions for the Darwin PowerPC console named
22161 # "xnuppc" -Benjamin Sittler
22164 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22167 # * add "putty" entry -TD
22168 # * updated "Apple_Terminal" entries -Benjamin Sittler
22171 # * add ms-vt100-color entry -TD
22172 # * add "konsole" entries -TD
22175 # * update gnome entry to Redhat 7.2 -TD
22178 # * add kf13-kf48 strings to cons25w -TD
22179 # * add pcvt25-color entry -TD
22180 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22181 # * improve some features of scoansi entry based on SCO's version -TD
22182 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22185 # * add kcbt to screen entry -TD
22188 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22191 # * split out linux-basic entry, making linux-c inherit from that, and
22192 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22193 # the history of this console type -TD
22194 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22195 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22198 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22201 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22202 # in the latter -TD
22205 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22206 # * ncr260wy350pp has only 16 color pairs -TD
22207 # * add sun-type4 from NetBSD -TD
22208 # * update xterm-xfree86 to current (patch 170) -TD
22209 # * add screen-bce, screen-s entries -TD
22210 # * add xterm-1002, xterm-1003 entries -TD
22213 # * update homepage for Top Gun Telnet/SSH
22216 # * reduce duplication in emx entries, added emx-base -TD
22219 # * corrected acs for screen.teraterm -TD
22220 # * add tkterm entry -TD
22223 # * cygwin changes from Charles Wilson:
22224 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22225 # primary instead of nxterm, to match XFree86's xterm.terminfo
22226 # usage and to prevent circular links.
22227 # (rxvt): add additional codes from rxvt.org.
22228 # (rxvt-color): new alias
22229 # (rxvt-xpm): new alias
22230 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22231 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22232 # with a "native" MSWin GUI. Each takes different acsc codes,
22233 # which are both different from the "normal" rxvt's acsc.
22234 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22235 # (cygwinDBG): ditto.
22238 # * update gnome terminal entries -TD
22241 # * add entries for djgpp 2.03 and 2.04 -TD
22244 # * add alias for vtnt -TD
22245 # * update xterm-xfree86 for XFree86 4.4 -TD
22248 # * add linux-vt (Andrey V Lukyanov)
22251 # * add screen.linux -TD
22254 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22257 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22258 # * add vt100+ and vt-utf8 entries -TD
22259 # * add uwin entry -TD
22262 # * add sgr strings to several common entries lacking them, e.g.,
22263 # screen, to make the entries more portable -TD
22264 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22265 # * similar fixups for cvvis/cnorm various entries -TD
22268 # * remove 'ncv' from xterm-256color (patch 188) -TD
22272 # * add xterm-xf86-v44 -TD
22273 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22274 # on G1 being used via an ISO-2022 escape sequence (report by
22275 # Juliusz Chroboczek) -TD
22276 # * add 'hurd' entry -TD
22279 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22281 # * align with xterm #192's use of xterm-new -TD
22282 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22283 # * make xterm-new the default "xterm" -TD
22286 # * minor fixes for emu -TD
22288 # * add rmam/smam to linux (Trevor Van Bremen)
22289 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22290 # * fixes for avatar0 -TD
22291 # * fixes for vp3a+ -TD
22294 # * add xterm-pc-fkeys -TD
22295 # * review/update gnome and gnome-rh90 entries (prompted by
22296 # Redhat Bugzilla #122815) -TD
22297 # * review/update konsole entries -TD
22298 # * add sgr, correct sgr0 for kterm and mlterm -TD
22299 # * correct tsl string in kterm -TD
22302 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22303 # * add sgr, rc/sc and ech to syscons entries -TD
22304 # * add function-keys to decansi -TD
22305 # * add sgr to mterm-ansi -TD
22306 # * add sgr, civis, cnorm to emu -TD
22307 # * correct/simplify cup in addrinfo -TD
22308 # * corrections for gnome and konsole entries
22309 # (Redhat Bugzilla #122815) -Hans de Goede
22310 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22311 # ISO-2022 strings for rmacs/smacs -TD
22314 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22317 # * improved putty entry -Robert de Bath
22320 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22321 # with the common usage of bce/ech -TD
22322 # * remove khome from vt220 (vt220's have no home key) -TD
22323 # * add rxvt+pcfkeys -TD
22326 # * modify several entries to ensure xterm mouse and cursor visibility
22327 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22328 # Eterm, screen. (The xterm entries are left alone - old ones for
22329 # compatibility, and the new ones do not require this change) -TD
22332 # * add morphos entry -Pavel Fedin
22333 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22334 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22337 # * update wsvt25 entry -TD
22340 # * update pairs for xterm-88color and xterm-256color to reflect the
22341 # ncurses extended-color support -TD
22344 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22345 # * add aixterm-16color to demonstrate 16-color capability -TD
22348 # * add media-copy to vt100 -TD
22349 # * corrected acsc string for vt52 -TD
22352 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22354 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22357 # * re-corrected acsc string for vt52 -TD
22360 # * corrected sun-il sgr string which referred to bold and underline -TD
22361 # * add sun-color entry -TD
22364 # * modify sgr0 in several entries to reset alternate-charset as in the
22366 # * modify sgr string of prism9 to better match the individual
22370 # * correct order of use= in rxvt-basic -TD
22373 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22376 # * other minor fixes to cygwin based on tack -TD
22377 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22380 # * add nsterm-16color entry -TD
22381 # * remove ncv flag from xterm-16color -TD
22382 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22383 # * update mlterm entry to 2.9.2 -TD
22386 # * fixes to make nsterm-16color match report
22387 # by Christian Ebert -Alain Bench
22390 # * add xterm+256color building block -TD
22391 # * add gnome-256color, putty-256color, rxvt-256color -TD
22394 # * add hpterm-color -TD
22397 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22398 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22399 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22400 # * improve xterm-256color by combining the ibm+16color setaf/setab
22401 # strings with SGR 48. The setf/setb strings also are cancelled here
22402 # rather than omitted so derived entries will cancel those also -Alain
22406 # * add some notes regarding copyright to terminfo.src -TD
22407 # * use rxvt+pcfkeys in Eterm -TD
22408 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22409 # as one would expect (km sends ESC rather than setting the 8th bit
22411 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22412 # * add konsole-solaris -TD
22415 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22416 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22417 # * modify xterm-24 to inherit from "xterm" -TD
22418 # * add xiterm entry -TD
22419 # * add putty-vt100 entry -TD
22420 # * corrected spelling of Michael A Dorman's name, prompted by
22421 # http://www.advogato.org/person/mdorman/diary.html -TD
22424 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22425 # * update xterm+pcfkeys to match xterm #216 -TD
22428 # * make descriptions of xterm entries consistent with its terminfo -TD
22431 # * add xfce, mgt -TD
22434 # * correct acsc string in kterm -TD
22437 # * add kon entry -TD
22438 # * remove invis from linux and related entries, add klone+sgr8 for those
22439 # that implement the feature (or have not been shown to lack it) -TD
22442 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22443 # * minor improvements to rxvt+pcfkeys -TD
22446 # * fix a few typos in if/then/else expressions -TD
22449 # * add several GNU Screen variations with 16- and 256-colors, and
22450 # status line (Alain Bench).
22453 # * add Newbury Data entries (Jean-Charles Billaud).
22456 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22459 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22460 # * add konsole-256color entry -TD
22463 # * add 9term entry (request by Juhapekka Tolvanen) -TD
22466 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
22467 # * add shift-control- and control-modified keys for rxvt editing
22469 # * update mlterm entry to 2.9.3 -TD
22470 # * add mlterm+pcfkeys -TD
22473 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
22474 # xterm+pcc0, etc., to make the corresponding building blocks reflect
22475 # xterm's capabilities -TD
22476 # * add mrxvt entry -TD
22477 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22480 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
22483 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22484 # xterm starting with patch #216 -TD
22485 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
22486 # to match xterm #230 -TD
22487 # * extend xterm+pccX entries to match xterm #230 -TD
22488 # * add xterm+app, xterm+noapp, from xterm #230 -TD
22489 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22492 # * add screen.rxvt -TD
22495 # * add screen+fkeys (prompted by Debian #478094) -TD
22498 # * add screen.mlterm -TD
22499 # * improve mlterm and mlterm+pcfkeys -TD
22502 # * add Eterm-256color, Eterm-88color -TD
22503 # * add rxvt-88color -TD
22506 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22507 # original to teraterm2.3 -TD
22508 # * update "gnome" to 2.22.3 -TD
22509 # * update "konsole" to 1.6.6 -TD
22510 # * add "aterm" -TD
22511 # * add "linux2.6.26" -TD
22514 # * change several \E[2g (clear tab at current column) to \E[3g
22515 # (clear all tabs) to match definition for tbc capability -TD
22518 # * add eterm-color -TD
22521 # * add screen.Eterm -TD
22524 # * correct typo in pfkey of ansi.sys-old
22525 # (report by Kalle Olavi Niemitalo)
22526 # * move function- and cursor-keys from emx-base to ansi.sys, and create
22527 # a pfkey capability which handles F1-F48 -TD
22530 # * add vwmterm entry (Bryan Christ)
22533 # * change ncv and op capabilities in sun-color to match Sun's entry for
22534 # this (report by Laszlo Peter)
22535 # * improve interix smso by using reverse rather than bold (report by
22536 # Kristof Zelechovski).
22539 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
22540 # * add linux-16color (Benjamin Sittler)
22541 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
22542 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
22543 # * add ccc and initc capabilities to xterm-16color -TD
22546 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
22549 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
22552 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
22553 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
22556 # * add bterm (bogl 0.1.18) -TD
22557 # * minor fix to rxvt+pcfkeys -TD
22560 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
22563 # * add several screen-bce.XXX entries -TD
22566 # * modify screen-bce.XXX entries to exclude ech, since screen's color
22567 # model does not clear with color for that feature -TD
22570 # * rename atari and st52 to atari-old, st52-old, use newer entries from
22571 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
22574 # * add mlterm+256color entry -TD
22577 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
22578 # the alternate character set (patch by Nicholas Marriott)
22581 # * improve acsc for vt52 (Benjamin Sittler)
22582 # * modify nsterm entries for consistent sgr/sgr0 -TD
22583 # * modify xnuppc entries for consistent sgr/sgr0 -TD
22584 # * add invis to tek4115 sgr -TD
22587 # * reformat acsc strings to canonical format -TD
22590 # * add "XT" capability to entries for terminals that support both
22591 # xterm-style mouse- and title-controls, for "screen" which
22592 # special-cases TERM beginning with "xterm" or "rxvt" -TD
22595 # * fill in no-parameter forms of cursor-movement where a parameterized
22596 # form is available -TD
22597 # * fill in missing cursor controls where the form of the controls is
22599 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
22602 # * correct comparison used for setting 16-colors in linux-16color
22603 # entry (Novell #644831) -TD
22604 # * improve linux-16color entry, using "dim" for color-8 which makes it
22605 # gray rather than black like color-0 -TD
22608 # * make "vte" the principal entry defining "gnome", since GNOME terminal
22609 # is merely one of several terminals whose behavior is provided by this
22613 # * fix typo in rmso for tek4106 -Goran Weinholt
22616 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
22617 # * also suppress ncv in konsole-base -TD
22620 # * add U8 feature to denote entries for terminal emulators which do not
22621 # support VT100 SI/SO when processing UTF-8 encoding -TD
22622 # * add xterm-utf8 as a demo of the U8 feature -TD
22625 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
22628 # * update minix entry to minix 3.2 (Thomas Cort).
22631 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
22632 # * remove a backslash which continued comment, obscuring altos3
22633 # definition with OpenBSD toolset (Nicholas Marriott).
22636 # * add/use xterm+tmux chunk from xterm #271 -TD
22637 # * resync xterm-new entry from xterm #271 -TD
22638 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
22639 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
22640 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
22643 # * add kich1 to sun (Yuri Pankov)
22644 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
22647 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
22650 # * minor cleanup of X-terminal emulator section -TD
22651 # * add terminator entry -TD
22652 # * add simpleterm entry -TD
22655 # * add xterm+kbs fragment from xterm #272 -TD
22658 # * add pccon entries for OpenBSD console (Alexei Malinin)
22661 # * corrected old changelog comments -TD
22664 # * add putty-sco -TD
22666 ######## SHANTIH! SHANTIH! SHANTIH!