1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2017/01/28 23:50:28 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
375 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
376 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
378 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
380 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The normal (ANSI) flavor of "media copy" building block asserts that
385 # characters sent to the printer do not echo on the screen. DEC terminals
386 # can also be put into autoprinter mode, where each line is sent to the
387 # printer as you move off that line, e.g., by a carriage return.
388 ansi+pp|ansi printer port,
390 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
391 dec+pp|DEC autoprinter mode,
392 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
394 # The IBM PC alternate character set. Plug this into any Intel console entry.
395 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
396 # ROM graphics for control characters such as the diamond, up- and down-arrow.
397 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
398 # will work with any Intel console, they all seem to have inherited \E[11m
399 # from the ANSI.SYS de-facto standard.
400 klone+acs|alternate character set for ansi.sys displays,
401 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
402 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
403 \301w\302x\263y\363z\362{\343|\330}\234~\376,
404 rmacs=\E[10m, smacs=\E[11m,
406 # Highlight controls corresponding to the ANSI.SYS standard. Most
407 # console drivers for Intel boxes obey these. Makes the same assumption
408 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
409 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
410 klone+sgr|attribute control for ansi.sys displays,
411 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
412 rmso=\E[m, rmul=\E[m,
413 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
415 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
418 # Most Intel boxes do not treat "invis" (invisible) text.
419 klone+sgr8|attribute control for ansi.sys displays,
421 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
422 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
425 # Highlight controls corresponding to the ANSI.SYS standard. *All*
426 # console drivers for Intel boxes obey these. Does not assume \E[11m will
427 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
428 # diamond and arrow characters under curses.
429 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
430 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
432 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
433 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
434 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
437 # KOI8-R (RFC1489) acs (alternate character set)
438 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
439 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
440 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
441 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
442 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
444 rmacs=\E[10m, smacs=\E[11m,
446 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
447 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
448 # but equivalent strings that don't rely on that coincidence:
449 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
450 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
451 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
452 # They match a subset of ECMA-48.
453 klone+color|color control for ansi.sys and ISO6429-compatible displays,
454 colors#8, ncv#3, pairs#64,
455 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
457 # This is better than klone+color, it doesn't assume white-on-black as the
458 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
459 ecma+color|color control for ECMA-48-compatible terminals,
461 colors#8, ncv#3, pairs#64,
462 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
464 # Attribute control for ECMA-48-compatible terminals
465 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
466 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
468 # For comparison, here are all the capabilities implied by the Intel
469 # Binary Compatibility Standard (level 2) that fit within terminfo.
470 # For more detail on this rather pathetic standard, see the comments
471 # near the end of this file.
472 ibcs2|Intel Binary Compatibility Standard prescriptions,
473 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
474 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
476 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
477 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
478 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
479 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
482 #### ANSI/ECMA-48 terminals and terminal emulators
484 # See near the end of this file for details on ANSI conformance.
485 # Don't mess with these entries! Lots of other entries depend on them!
487 # This section lists entries in a least-capable to most-capable order.
488 # if you're in doubt about what `ANSI' matches yours, try them in that
489 # order and back off from the first that breaks.
491 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
492 # and more than one page of memory. It uses local motions instead of
493 # direct cursor addressing, and makes almost no assumptions. It does
494 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
495 ansi-mr|mem rel cup ansi,
497 cols#80, lines#24, use=vanilla, use=ansi+erase,
500 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
501 # beware of screen size problems and memory relative cursor addressing.
502 ansi-mini|any ansi terminal with pessimistic assumptions,
504 cols#80, lines#24, use=vanilla, use=ansi+cup,
507 # ansi-mtabs adds relative addressing and minimal tab support
508 ansi-mtabs|any ansi terminal with pessimistic assumptions,
510 ht=^I, use=ansi-mini, use=ansi+local1,
512 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
514 # The following is an entry for the full ANSI 3.64 (1977). It lacks
515 # padding, but most terminals using the standard are "fast" enough
516 # not to require any -- even at 9600 bps. If you encounter problems,
517 # try including the padding specifications.
519 # Note: the :as: and :ae: specifications are not implemented here, for
520 # the available termcap documentation does not make clear WHICH alternate
521 # character set to specify. ANSI 3.64 seems to make allowances for several.
522 # Please make the appropriate adjustments to fit your needs -- that is
523 # if you will be using alternate character sets.
525 # There are very few terminals running the full ANSI 3.64 standard,
526 # so I could only test this entry on one verified terminal (Visual 102).
527 # I would appreciate the results on other terminals sent to me.
529 # Please report comments, changes, and problems to:
531 # U.S. MAIL: Hugh Hansard
534 # Atlanta, GA. 30322.
536 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
538 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
539 ansi77|ansi 3.64 standard 1977 version,
541 cols#80, it#8, lines#24,
542 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
543 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
544 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
545 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
546 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
547 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
548 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
549 smso=\E[7m, smul=\E[4m,
551 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
552 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
553 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
554 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
555 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
556 # to confuse many emulators. On the other hand, we can count on these programs
557 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
558 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
559 # ANSI.SYS influence.
560 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
561 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
563 cols#80, it#8, lines#24,
564 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
565 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
566 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
567 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
568 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
570 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
571 lines#25, use=pcansi-m,
572 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
573 lines#33, use=pcansi-m,
574 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
575 lines#43, use=pcansi-m,
576 # The color versions. All PC emulators do color...
577 pcansi|ibm-pc terminal programs claiming to be ansi,
578 use=klone+color, use=pcansi-m,
579 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
580 lines#25, use=pcansi,
581 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
582 lines#33, use=pcansi,
583 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
584 lines#43, use=pcansi,
586 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
587 # If you want pound signs rather than dollars, replace `B' with `A'
588 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
589 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
590 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
592 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
593 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
594 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
595 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
596 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
597 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
598 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
599 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
600 vpa=\E[%i%p1%dd, use=pcansi-m,
602 ansi+enq|ncurses extension for ANSI ENQ,
603 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
606 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
607 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
608 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
609 ansi|ansi/pc-term compatible with color,
610 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
612 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
613 # all the normal ANSI stuff with no extensions. It assumes
614 # insert/delete line/char is there, so it won't work with
615 # vt100 clones. It assumes video attributes for bold, blink,
616 # underline, and reverse, which won't matter much if the terminal
617 # can't do some of those. Padding is assumed to be zero, which
618 # shouldn't hurt since xon/xoff is assumed.
619 ansi-generic|generic ansi standard terminal,
621 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
622 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
623 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
624 use=ansi+sgrbold, use=ansi+arrows,
626 #### DOS ANSI.SYS variants
628 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
629 # documentation (except for the keyboard key reassignment feature, which
630 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
631 # though undocumented. The <pfkey> capability is untested but should work for
632 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
633 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
634 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
635 OTbs, am, mir, msgr, xon,
637 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
638 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
639 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
640 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
641 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
642 u7=\E[6n, use=klone+color, use=klone+sgr8,
644 # Keypad: Home=\0G Up=\0H PrPag=\0I
645 # ka1,kh kcuu1 kpp,ka3
647 # Left=\0K 5=\0L Right=\0M
650 # End=\0O Down=\0P NxPag=\0Q
651 # kc1,kend kcud1 kc3,knp
656 # On keyboard with 12 function keys,
657 # shifted f-keys: F13-F24
658 # control f-keys: F25-F36
659 # alt f-keys: F37-F48
660 # The shift/control/alt keys do not modify each other, but alt overrides both,
661 # and control overrides shift.
663 # <pfkey> capability for F1-F48 -TD
664 ansi.sys|ANSI.SYS 3.1 and later versions,
665 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
666 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
667 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
668 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
669 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
670 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
671 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
672 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
673 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
674 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
675 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
676 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
677 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
678 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
679 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
683 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
684 # This should only be used when the terminal emulator cannot redefine the keys.
685 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
686 # definitions must be restored. If the terminal emulator is quit while in vi
687 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
688 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
689 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
690 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
691 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
692 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
693 # Consequently the End keypad key could not be set (it is relatively safe and
694 # actually useful because it sends ^@ O, which beeps and opens a line above).
695 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
696 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
697 \svi\s9-29-86\n\E[;75;8p,
698 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
699 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
700 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
701 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
704 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
705 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
706 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
707 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
710 # See ansi.sysk and nansi.sys above.
711 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
712 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
713 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
714 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
717 #### Atari ST terminals
719 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
721 tw52|tw52-color|Toswin window manager with color,
723 colors#16, pairs#256,
724 oc=\Eb?\Ec0, op=\Eb?\Ec0,
725 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
727 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
729 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
731 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
734 tw52-m|Toswin window manager monochrome,
737 bold=\Eya, dch1=\Ea, dim=\EyB,
738 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
739 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
740 smso=\EyQ, smul=\EyH, use=at-m,
741 tt52|Atari TT medium and high resolution,
742 lines#30, use=at-color,
743 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
745 colors#16, pairs#256,
746 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
747 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
748 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
749 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
750 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
752 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
753 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
754 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
755 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
757 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
758 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
759 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
760 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
762 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
763 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
764 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
765 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
768 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
770 cols#80, it#8, lines#24,
771 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
772 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
773 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
774 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
775 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
776 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
777 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
778 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
779 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
780 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
781 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
782 tw100|toswin vt100 window mgr,
784 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
785 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
787 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
788 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
789 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
790 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
791 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
792 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
793 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
794 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
795 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
796 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
797 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
798 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
799 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
800 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
801 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
802 rmso=\E[m, rmul=\E[m,
803 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
805 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
806 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
808 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
809 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
811 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
812 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
813 # The entries for stv52 and stv52pc probably need a revision.
814 stv52|MiNT virtual console,
816 cols#80, it#8, lines#30,
817 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
818 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
819 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
820 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
821 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
822 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
823 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
824 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
825 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
826 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
827 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
828 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
829 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
830 stv52pc|MiNT virtual console with PC charset,
832 cols#80, it#8, lines#30,
833 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
834 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
835 \363z\362{\343|\366}\234~\371,
836 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
837 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
838 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
839 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
840 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
841 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
842 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
843 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
844 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
845 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
846 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
847 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
850 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
853 cols#80, it#8, lines#25,
854 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
855 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
856 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
857 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
858 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
859 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
860 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
862 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
863 # MiNT VT52 emulation. 80 columns, 25 rows.
864 # MiNT is Now TOS, the operating system which comes with all Ataris now
865 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
866 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
867 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
868 st52-old|Atari ST with VT52 emulation,
871 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
872 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
873 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
874 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
875 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
876 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
877 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
878 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
879 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
882 #### Apple Terminal.app
884 # nsterm*|Apple_Terminal - AppKit Terminal.app
886 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
887 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
888 # Server and Mac OS X operating systems. There is also a
889 # "terminal.app" in GNUStep, but I believe it to be an unrelated
890 # codebase and I have not attempted to describe it here.
892 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
893 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
894 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
895 # version supports color.
897 # To determine the version of Terminal.app you're using by running:
899 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
901 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
903 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
905 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
907 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
909 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
911 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
912 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
913 # might work too, but really you're on your own here since these
914 # systems are very obsolete and I can't test them. I do welcome
915 # patches, though :).
919 # For GNUstep_Terminal, you're probably best off using "linux" or
920 # writing your own terminfo.
922 # For MacTelnet, you're on your own. It's a different codebase, and
923 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
925 # For iTerm.app, see "iterm".
928 # The AppKit Terminal.app descriptions all have names beginning with
929 # "nsterm". Note that the statusline (-s) versions use the window
930 # titlebar as a phony status line, and may produce warnings during
931 # compilation as a result ("tsl uses 0 parameters, expected 1".)
932 # Ignore these warnings, or even ignore these entries entirely. Apps
933 # which need to position the cursor or do other fancy stuff inside the
934 # status line won't work with these entries. They're primarily useful
935 # for programs like Pine which provide simple notifications in the
936 # status line. Please note that non-ASCII characters don't work right
937 # in the status line, since Terminal.app incorrectly interprets their
938 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
939 # versions) or only accepts status lines consisting entirely of
940 # characters from the first 256 Unicode positions (including C1 but
943 # The Mythology* of AppKit Terminal.app:
945 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
946 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
947 # shareware replacement for Terminal called "Stuart" which NeXT bought
948 # and used as the basis for the Terminal.app in NeXTstep 2+,
949 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
950 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
951 # capabilities for the early versions, but I believe that the
952 # TERM_PROGRAM_VERSION may have been reset at some point.
954 # The early versions were tailored to the NeXT character set. Sometime
955 # after the Apple aquisition the encoding was swiched to MacRoman
956 # (initally with serious altcharset bugs due to incomplete conversion
957 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
958 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
959 # 8-color support (initially buggy when combined with attributes, but
960 # that was later fixed.) More recently, around Mac OS X version 10.3
961 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
962 # some versions (for instance 133-1 which shipped with Mac OS X
963 # version 10.4) this suffered from the <bce> bug, but that seems to
964 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
966 # In the early days of Mac OS X the terminal was fairly buggy and
967 # would routinely crash under load. Many of these bugs seem to have
968 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
969 # some may still remain. This change seems to correspond to
970 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
973 # * This may correspond with what actually happened, but I don't
974 # know. It is based on guesswork, hearsay, private correspondence,
975 # my faulty memory, and the following online sources and references:
977 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
978 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
980 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
981 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
983 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
984 # "nsterm" to comply with the name length and case conventions and
985 # limitations of various software packages [notably Solaris terminfo
986 # and UNIX.] A single Apple_Terminal alias is retained for
987 # backwards-compatbility.
989 # * Added function key support (F1-F4). These only work in Terminal.app
990 # version 51, hopefully the capabilities won't cause problems for people
993 # * Added "full color" (-c) entries which support the 16-color mode in
996 # * By default, version 51 uses UTF-8 encoding with broken altcharset
997 # support, so "ASCII" (-7) entries without altcharset support were
1000 # nsterm - AppKit Terminal.app
1002 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1003 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1004 # extensions. This terminfo was written to describe versions 41
1005 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1006 # version 10.1) of Terminal.app.
1008 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1009 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1010 # use, the executable for Terminal.app is:
1011 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1013 # If you're looking for a description of the full-screen system
1014 # console which runs under Apple's Darwin operating system on PowerPC
1015 # platforms, see the "xnuppc" entry instead.
1017 # There were no function keys in version 41. In version 51, there are
1018 # four working function keys (F1, F2, F3 and F4.) The function keys
1019 # are included in all of these entries.
1021 # It does not support mouse pointer position reporting. Under some
1022 # circumstances the cursor can be positioned using option-click; this
1023 # works by comparing the cursor position and the selected position,
1024 # and simulating enough cursor-key presses to move the cursor to the
1025 # selected position. This technique fails in all but the simplest
1028 # It provides partial ANSI color support (background colors interacted
1029 # badly with bold in version 41, though, as reflected in :ncv:.) The
1030 # monochrome (-m) entries are useful if you've disabled color support
1031 # or use a monochrome monitor. The full color (-c) entries are useful
1032 # in version 51, which doesn't exhibit the background color bug. They
1033 # also enable an xterm-compatible 16-color mode.
1035 # The configurable titlebar is set using xterm-compatible sequences;
1036 # it is used as a status bar in the statusline (-s) entries. Its width
1037 # depends on font sizes and window sizes, but 50 characters seems to
1038 # be the default for an 80x24 window.
1040 # The MacRoman character encoding is used for some of the alternate
1041 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1042 # disable alternate character set support entirely, and the "VT100"
1043 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1044 # graphics emulation, which seems to think the character encoding is
1045 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1046 # are useful in Terminal.app version 51, which supports UTF-8 and
1047 # other ASCII-compatible character encodings but does not correctly
1048 # implement VT100 graphics; once VT100 graphics are correctly
1049 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1050 # usable in any ASCII-compatible character encoding [except perhaps
1051 # in UTF-8, where some experts argue for disallowing alternate
1052 # characters entirely.]
1054 # Terminal.app reports "vt100" as the terminal type, but exports
1055 # several environment variables which may aid detection in a shell
1056 # profile (i.e. .profile or .login):
1059 # TERM_PROGRAM=Apple_Terminal
1060 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1061 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1063 # For example, the following Bourne shell script would detect the
1064 # correct terminal type:
1066 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1069 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1077 # In a C shell derivative, this would be accomplished by:
1079 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1080 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1081 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1082 # setenv TERM "nsterm-old"
1084 # setenv TERM "nsterm-c-7"
1089 # The '+' entries are building blocks
1090 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1091 am, bw, msgr, xenl, xon,
1092 cols#80, it#8, lines#24,
1093 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1094 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1095 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1096 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1097 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1098 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1099 ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1100 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1101 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1102 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1103 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1104 %p5%t;2%;%?%p7%t;8%;m,
1105 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1106 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1108 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1109 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1110 enacs=\E(B\E)0, rmacs=^O,
1111 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1112 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1113 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1115 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1116 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1117 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1118 \271|\255}\243~\245,
1119 enacs=\E(B\E)0, rmacs=^O,
1120 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1121 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1122 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1124 # compare with xterm+sl-twm
1125 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1126 wsl#50, use=xterm+sl-twm,
1128 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1129 op=\E[0m, use=ibm+16color,
1131 nsterm+c41|AppKit Terminal.app v41 color support,
1132 colors#8, ncv#37, pairs#64,
1133 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1135 # These are different combinations of the building blocks
1137 # ASCII charset (-7)
1138 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1141 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1142 use=nsterm+s, use=nsterm+7,
1144 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1145 use=nsterm+c41, use=nsterm+7,
1147 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1148 use=nsterm+c, use=nsterm+7,
1150 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1151 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1153 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1154 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1156 # VT100 alternate-charset (-acs)
1157 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1160 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1161 use=nsterm+s, use=nsterm+acs,
1163 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1164 use=nsterm+c41, use=nsterm+acs,
1166 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1167 use=nsterm+c, use=nsterm+acs,
1169 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1170 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1172 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1173 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1176 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1179 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1180 use=nsterm+s, use=nsterm+mac,
1182 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1183 use=nsterm+c41, use=nsterm+mac,
1185 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1186 use=nsterm+c, use=nsterm+mac,
1188 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1189 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1191 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1192 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1194 # In Mac OS X version 10.5 the format of the preferences has changed
1195 # and a new, more complex technique is needed, e.g.,
1197 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1198 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1199 # ud.init();prefs=ud.persistentDomainForName_(
1200 # "com.apple.Terminal");prefs["Window Settings"][
1201 # prefs["Default Window Settings"]]["TerminalType"
1202 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1203 # "com.apple.Terminal")' nsterm-16color
1205 # and it is still not settable from the preferences dialog. This is
1206 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1207 # in Apple's bug reporter.
1209 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1210 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1211 # vt52, vt100, vt102 and xterm.
1212 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1214 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1215 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1216 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1217 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1218 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1219 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1220 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1221 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1222 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1223 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1225 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1226 # the background color erase feature. The newer version 240.2 in Mac OS X
1227 # version 10.5 does not.
1229 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1230 # and D P Schreber comparing to nsterm-c-s-acs.
1232 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1233 # can be set in Terminal.app, e.g.,
1235 # defaults write com.apple.Terminal TermCapString nsterm-bce
1237 # and that it is not set in Terminal's preferences dialog.
1239 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1242 # * The terminal description matches the default settings.
1243 # * The keyboard is configurable via a dialog.
1244 # * By default khome, kend, knext and kprev are honored only with a
1246 # * There are bindings for control left/right arrow (but not up/down).
1247 # Added those to nsterm-16color, which is the version used for OS X 10.6
1248 # * "Allow VT100 application keypage mode" is by default disabled.
1249 # There is no way to press keypad-comma unless application mode is enabled
1251 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1252 # * CHT, REP, SU, SD are buggy.
1253 # * ECH works (also in Leopard), but is not used here for compatibility.
1254 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1255 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1256 # nsterm entry from this file to override the MacPorts (20110404) or
1257 # system (20081102) copy of this file.
1258 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1259 # dialog defaults to xterm-256color. Alternative selections are ansi,
1260 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1261 # the menu says "Declare terminal as" without promising to actually emulate
1262 # the corresponding terminals. Indeed, changing TERM does not affect the
1263 # emulation itself. This means that
1264 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1266 # + the color model is the same for each setting of TERM (does not match
1268 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1269 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1270 # + the vt52 emulation does not give a usable shell because screen-clearing
1271 # does not work as expected.
1272 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1273 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1274 # as well as unmasking F10 (which had been used in the window manager). Those
1275 # keys are listed in this entry.
1276 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1277 bce, use=nsterm-16color,
1279 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1280 # TERM_PROGRAM_VERSION=309
1281 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1282 # TERM_PROGRAM_VERSION=303
1283 nsterm-256color|Terminal.app in OS X 10.8,
1284 use=xterm+256setaf, use=nsterm-bce,
1286 nsterm-build326|Terminal.app in OS X 10.9,
1287 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1288 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1289 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1290 use=nsterm-256color,
1293 nsterm-build343|Terminal.app in OS X 10.10,
1294 kend=\EOF, khome=\EOH, use=nsterm-build326,
1296 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1298 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1299 # + f1-f4 map to pf1-pf4
1300 # + no vt220 support aside from DECTCEM and ECH
1301 # + there are no protected areas. Forget about anything above vt220.
1302 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1303 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1304 # + but bce fails for 11.6.7.2 (test repeat).
1305 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1306 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1307 # + normal (not X10 or Highlight tracking) mouse now works.
1308 # + mouse any-event works
1309 # + mouse button-event works
1310 # + in alternate screen:
1312 # mode 1047 fails to restore cursor position (do not use)
1313 # mode 1049 fails to restore screen contents (do not use)
1314 # + dtterm window-modify operations work (some messages are not printed)
1315 # + dtterm window-report gives size of window in characters/pixels as
1316 # well as state of window.
1318 # + there is no difference between cnorm/cvvis
1319 # + has dim/invis/blink (no protect of course)
1320 # + most function keys with shift/control modifiers give beep
1321 # (user can configure, but out-of-the-box is what I record)
1322 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1324 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1325 # + kLFT/kRIT work, but not up/down with shift-modifier
1326 # + there are a few predefined bindings with Alt, but no clear pattern.
1327 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1328 # Using ncurses test-program with xterm-new:
1330 # Using xterm's scripts:
1331 # + palette for 256-colors is hardcoded.
1332 # + no support for "dynamic colors"
1333 # + no support for tcap-query.
1334 nsterm-build361|Terminal.app in OS X 10.11,
1335 kmous=\E[M, use=nsterm-build343,
1337 # This is an alias which should always point to the "current" version
1338 nsterm|Apple_Terminal|AppKit Terminal.app,
1339 use=nsterm-build361,
1341 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1342 # more featureful) terminal emulator for Mac OS X. It is similar
1343 # enough in capabilities to nsterm-16color that I have derived this
1344 # description from that one, but as far as I know they share no code.
1345 # Many of the features are user-configurable, but I attempt only to
1346 # describe the default configuration.
1348 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1350 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1352 csr@, dim@, kend=\EOF, khome=\EOH,
1353 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1354 %p7%t;8%;m%?%p9%t\016%e\017%;,
1355 use=xterm+256setaf, use=nsterm-16color,
1357 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1359 # On PowerPC platforms, Apple's Darwin operating system uses a
1360 # full-screen system console derived from a NetBSD framebuffer
1361 # console. It is an ANSI-style terminal, and is not really VT-100
1364 # Under Mac OS X, this is the system console driver used while in
1365 # single-user mode [reachable by holding down Command-S during the
1366 # boot process] and when logged in using console mode [reachable by
1367 # typing ">console" at the graphical login prompt.]
1369 # If you're looking for a description of the Terminal.app terminal
1370 # emulator which runs under the Mac OS X Quartz windowing system (and
1371 # other AppKit-supported windowing systems,) see the "nsterm"
1374 # NOTE: Under Mac OS X version 10.1, the default login window does not
1375 # prompt for user name, instead requiring an icon to be selected from
1376 # a list of known users. Since the special ">console" login is not in
1377 # this list, you must make one of two changes in the Login Window
1378 # panel of the Login section of System Prefs to make the special
1379 # ">console" login accessible. The first option is to enable 'Show
1380 # "Other User" in list for network users', which will add a special
1381 # "Other..." icon to the graphical login panel. Selecting "Other..."
1382 # will present the regular graphical login prompt. The second option
1383 # is to change the 'Display Login Window as:' setting to 'Name and
1384 # password entry fields', which replaces the login panel with a
1385 # graphical login prompt.
1387 # There are no function keys, at least not in Darwin 1.3.
1389 # It has no mouse support.
1391 # It has full ANSI color support, and color combines correctly with
1392 # all three supported attributes: bold, inverse-video and underline.
1393 # However, bold colored text is almost unreadable (bolding is
1394 # accomplished using shifting and or-ing, and looks smeared) so bold
1395 # has been excluded from the list of color-compatible attributes
1396 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1397 # monochrome monitor.
1399 # There is one serious bug with this terminal emulation's color
1400 # support: repositioning the cursor onto a cell with non-matching
1401 # colors obliterates that cell's contents, replacing it with a blank
1402 # and displaying a colored cursor in the "current" colors. There is
1403 # no complete workaround at present [other than using the monochrome
1404 # (-m) entries,] but removing the (msgr) capability seemed to help.
1406 # The "standout" chosen was simple reverse-video, although a colorful
1407 # standout might be more aesthetically pleasing. Similarly, the bold
1408 # chosen is the terminal's own smeared bold, although a simple
1409 # color-change might be more readable. The color-bold (-b) entries
1410 # uses magenta colored text for bolding instead. The fancy color (-f
1411 # and -f2) entries use color for bold, standout and underlined text
1412 # (underlined text is still underlined, though.)
1414 # Apparently the terminal emulator does support a VT-100-style
1415 # alternate character set, but all the alternate character set
1416 # positions have been left blank in the font. For this reason, no
1417 # alternate character set capabilities have been included in this
1418 # description. The console driver appears to be ASCII-only, so (enacs)
1419 # has been excluded [although the VT-100 sequence does work.]
1421 # The default Mac OS X and Darwin installation reports "vt100" as the
1422 # terminal type, and exports no helpful environment variables. To fix
1423 # this, change the "console" entry in /etc/ttys from "vt100" to
1424 # "xnuppc-WxH", where W and H are the character dimensions of your
1425 # console (see below.)
1427 # The font used by the terminal emulator is apparently one originally
1428 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1429 # file includes descriptions for the following geometries:
1431 # Pixels Characters Entry Name (append -m for monochrome)
1432 # -------------------------------------------------------------------
1433 # 640x400 80x25 xnuppc-80x25
1434 # 640x480 80x30 xnuppc-80x30
1435 # 720x480 90x30 xnuppc-90x30
1436 # 800x600 100x37 xnuppc-100x37
1437 # 896x600 112x37 xnuppc-112x37
1438 # 1024x640 128x40 xnuppc-128x40
1439 # 1024x768 128x48 xnuppc-128x48
1440 # 1152x768 144x48 xnuppc-144x48
1441 # 1280x1024 160x64 xnuppc-160x64
1442 # 1600x1024 200x64 xnuppc-200x64
1443 # 1600x1200 200x75 xnuppc-200x75
1444 # 2048x1536 256x96 xnuppc-256x96
1446 # The basic "xnuppc" entry includes no size information, and the
1447 # emulator includes no reporting capability, so you'll be at the mercy
1448 # of the TTY device (which reports incorrectly on my hardware.) The
1449 # color-bold entries do not include size information.
1451 # The '+' entries are building blocks
1452 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1455 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1456 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1457 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1458 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1459 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1460 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1461 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1462 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1464 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1465 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1466 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1468 xnuppc+c|Darwin PowerPC Console ANSI color support,
1469 colors#8, ncv#32, pairs#64,
1470 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1472 xnuppc+b|Darwin PowerPC Console color-bold support,
1475 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1478 xnuppc+f|Darwin PowerPC Console fancy color support,
1480 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1482 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1484 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1487 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1488 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1490 # Building blocks for specific screen sizes
1491 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1494 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1497 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1500 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1503 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1506 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1509 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1512 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1515 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1518 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1521 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1524 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1527 # These are different combinations of the building blocks
1529 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1532 xnuppc|darwin|Darwin PowerPC Console (color),
1533 use=xnuppc+c, use=xnuppc+basic,
1535 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1538 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1539 use=xnuppc+b, use=xnuppc+c,
1541 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1544 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1545 use=xnuppc+f, use=xnuppc+c,
1547 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1550 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1551 use=xnuppc+f2, use=xnuppc+c,
1553 # Combinations for specific screen sizes
1554 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1555 use=xnuppc+80x25, use=xnuppc+basic,
1557 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1558 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1560 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1561 use=xnuppc+80x30, use=xnuppc+basic,
1563 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1564 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1566 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1567 use=xnuppc+90x30, use=xnuppc+basic,
1569 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1570 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1572 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1573 use=xnuppc+100x37, use=xnuppc+basic,
1575 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1576 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1578 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1579 use=xnuppc+112x37, use=xnuppc+basic,
1581 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1582 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1584 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1585 use=xnuppc+128x40, use=xnuppc+basic,
1587 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1588 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1590 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1591 use=xnuppc+128x48, use=xnuppc+basic,
1593 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1594 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1596 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1597 use=xnuppc+144x48, use=xnuppc+basic,
1599 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1600 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1602 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1603 use=xnuppc+160x64, use=xnuppc+basic,
1605 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1606 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1608 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1609 use=xnuppc+200x64, use=xnuppc+basic,
1611 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1612 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1614 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1615 use=xnuppc+200x75, use=xnuppc+basic,
1617 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1618 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1620 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1621 use=xnuppc+256x96, use=xnuppc+basic,
1623 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1624 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1629 # BeOS entry for Terminal program Seems to be almost ANSI
1630 beterm|BeOS Terminal,
1631 am, eo, mir, msgr, xenl, xon,
1632 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1633 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1634 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1635 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1636 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1637 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1638 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1639 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1640 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1641 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1642 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1643 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1644 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1645 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1646 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1647 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1648 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1649 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1650 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1651 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1657 # This entry is good for the 1.2.13 or later version of the Linux console.
1659 # ***************************************************************************
1662 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1663 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1664 # * character. Here are the keymap replacement lines that will set this up: *
1666 # keycode 15 = Tab Tab
1667 # alt keycode 15 = Meta_Tab
1668 # shift keycode 15 = F26
1669 # string F26 ="\033[Z"
1671 # * This has to use a key slot which is unfortunate (any unused one will *
1672 # * do, F26 is the higher-numbered one). The change ought to be built *
1673 # * into the kernel tables. *
1675 # ***************************************************************************
1677 # All linux kernels since 1.2.13 (at least) set the screen size
1678 # themselves; this entry assumes that capability.
1680 linux-basic|linux console,
1681 am, bce, eo, mir, msgr, xenl, xon,
1683 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1684 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1685 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1686 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1687 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1688 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1689 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1690 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1691 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1692 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1693 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1694 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1695 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1696 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1697 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1698 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1699 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1700 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1701 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1702 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1703 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1704 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1705 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1706 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1709 linux-m|Linux console no color,
1711 setab@, setaf@, setb@, setf@, use=linux,
1713 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1714 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1715 # not supposedly back-portable to older SV curses (although it has worked fine
1716 # on Solaris for several years) and not supported in ncurses versions before
1718 linux-c-nc|linux console with color-change,
1720 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1721 %02x%p4%{255}%*%{1000}%/%02x,
1722 oc=\E]R, use=linux-basic,
1723 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1724 linux-c|linux console 1.3.6+ for older ncurses,
1726 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1727 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1728 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1729 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1730 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1731 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1732 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1733 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1735 oc=\E]R, use=linux-basic,
1737 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1738 # get a block cursor for cvvis.
1739 # reported by Frank Heckenbach <frank@g-n-u.de>.
1740 linux2.2|linux 2.2.x console,
1741 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1742 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1744 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1745 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1746 # Although the kernel has mappings for these, they were not in the default
1747 # font (tested with Debian and Fedora):
1753 linux2.6|linux 2.6.x console,
1754 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1756 enacs=\E)0, rmacs=^O,
1757 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1758 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1759 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1761 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1762 # It is the same as xterm's erase-saved-lines feature.
1763 linux3.0|linux 3.0 kernels,
1764 E3=\E[3J, use=linux2.6,
1766 # This is Linux console for ncurses.
1767 linux|linux console,
1770 # Subject: linux 2.6.26 vt back_color_erase
1771 # Changes to the Linux console driver broke bce model as reported in
1772 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1774 # http://lkml.org/lkml/2008/4/26/305
1775 # http://lkml.org/lkml/2008/10/3/66
1776 linux2.6.26|linux console w/o bce,
1779 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1780 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1781 ich@, ich1@, use=linux,
1783 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1784 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1785 linux-koi8|linux with koi8 alternate character set,
1786 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1787 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1788 \211w\210x\201y\230z\231{\267|\274~\224,
1789 use=linux, use=klone+koi8acs,
1791 # Another entry for KOI8-r with Qing Long's acsc.
1792 # (which one better complies with the standard?)
1793 linux-koi8r|linux with koi8-r alternate character set,
1794 use=linux, use=klone+koi8acs,
1796 # Entry for the latin1 and latin2 fonts
1797 linux-lat|linux with latin1 or latin2 alternate character set,
1798 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1799 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1800 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1803 # This uses graphics from VT codeset instead of from cp437.
1804 # reason: cp437 (aka "straight to font") is not functional under luit.
1805 # from: Andrey V Lukyanov <land@long.yar.ru>.
1806 linux-vt|linux console using VT codes for graphics,
1807 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1809 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1812 # This is based on the Linux console (relies on the console to perform some
1813 # of the functionality), but does not recognize as many control sequences.
1814 # The program comes bundled with an old (circa 1998) copy of the Linux
1815 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1816 # \E* move cursor to home, as as \E[H
1818 # \EE move cursor to beginning of row
1819 # \E[y,xf same as \E[y,xH
1821 # Note: The status-line support is buggy (dsl does not work).
1822 kon|kon2|jfbterm|Kanji ON Linux console,
1824 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1825 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1828 # 16-color linux console entry; this works with a 256-character
1829 # console font but bright background colors turn into dim ones when
1830 # you use a 512-character console font. This uses bold for bright
1831 # foreground colors and blink for bright background colors.
1832 linux-16color|linux console with 16 colors,
1833 colors#16, ncv#42, pairs#256,
1834 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1835 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1838 # bterm (bogl 0.1.18)
1839 # Implementation is in bogl-term.c
1840 # Key capabilities from linux terminfo entry
1843 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1844 # bterm does not support sgr, since it only processes one parameter -TD
1845 bterm|bogl virtual terminal,
1847 colors#8, cols#80, lines#24, pairs#64,
1848 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1849 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1850 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1851 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1852 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1853 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1854 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1855 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1856 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1857 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1858 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1859 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1860 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1861 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1866 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1869 cols#80, it#8, lines#25,
1870 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1871 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1872 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1873 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1874 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1875 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1876 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1877 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1878 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1879 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1880 smso=\E[7m, smul=\E[4m,
1881 mach-bold|Mach Console with bold instead of underline,
1882 rmul=\E[0m, smul=\E[1m, use=mach,
1883 mach-color|Mach Console with ANSI color,
1885 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1886 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1888 # From: Samuel Thibault
1889 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1890 # Files: i386/i386at/kd.c
1892 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1894 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1895 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1896 \263y\363z\362{\343|\330}\234~\376,
1897 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1898 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1899 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1900 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1901 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1904 mach-gnu-color|Mach Console with ANSI color,
1906 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1907 setaf=\E[3%p1%dm, use=mach-gnu,
1909 # From: Marcus Brinkmann
1910 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1912 # Comments in the original are summarized here:
1914 # hurd uses 8-bit characters (km).
1916 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1918 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1919 # have the eat_newline_glitch. It doesn't support setting or removing tab
1922 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1923 # one byte instead three.
1925 # <ich1> is not included because hurd has insert mode.
1927 # hurd doesn't use ^J for scrolling, because this could put things into the
1928 # scrollback buffer.
1930 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1931 # This is a GNU extension.
1933 # The original has commented-out ncv, but is restored here.
1935 # Reading the source, RIS resets cnorm, but not xmous.
1936 hurd|The GNU Hurd console server,
1937 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1938 colors#8, it#8, ncv#18, pairs#64,
1939 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1941 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1942 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1943 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1944 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1945 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1946 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1947 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1948 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1949 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1950 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1951 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1952 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1953 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1954 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1955 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1956 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1957 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1958 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1959 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1960 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1961 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1962 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1963 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1964 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1965 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1972 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1973 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1974 # right corner without triggering a scroll. The ncurses terminfo library can
1975 # handle this case with the <ich1> capability, and prefers <am> for better
1976 # optimization. Bug: The <op> capability resets attributes.
1977 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1978 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1979 qnx|qnx4|qnx console,
1980 daisy, km, mir, msgr, xhpa, xt,
1981 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1982 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1983 \303u\264v\301w\302x\263,
1984 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1985 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1986 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1987 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1988 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1989 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1990 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1991 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1992 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1993 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1994 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1995 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1996 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1997 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1998 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1999 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2000 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2001 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2002 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2003 kext=\377\270, kf1=\377\201, kf10=\377\212,
2004 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2005 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2006 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2007 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2008 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2009 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2010 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2011 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2012 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2013 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2014 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2015 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2016 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2017 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2018 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2019 khlp=\377\350, khome=\377\240, khts=\377\342,
2020 kich1=\377\253, kil1=\377\273, kind=\377\261,
2021 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2022 knp=\377\252, knxt=\377\312, kopn=\377\357,
2023 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2024 kprv=\377\302, krdo=\377\336, kref=\377\354,
2025 kres=\377\360, krfr=\377\347, kri=\377\271,
2026 krmir=\377\313, krpl=\377\362, krst=\377\352,
2027 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2028 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2029 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2030 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2031 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2035 qnxt|qnxt4|QNX4 terminal,
2038 qnxm|QNX4 with mouse events,
2040 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2041 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2042 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2043 smicm=\E/>2h, use=qnx4,
2048 # Monochrome QNX4 terminal or console. Setting this terminal type will
2049 # allow an application running on a color console to behave as if it
2050 # were a monochrome terminal. Output will be through stdout instead of
2051 # console writes because the term routines will recognize that the
2052 # terminal name starts with 'qnxt'.
2054 qnxtmono|Monochrome QNX4 terminal or console,
2058 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2059 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2060 # (TD: derive from original qnx4 entry)
2061 qnxt2|qnx 2.15 serial terminal,
2063 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2064 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2066 # QNX ANSI terminal definition
2069 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2070 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2071 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2072 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
2073 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2074 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2075 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2076 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2077 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2078 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2079 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2080 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2081 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2082 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2083 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2084 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2085 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2086 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2087 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2088 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2089 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2090 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2091 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2092 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2093 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2094 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2095 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2096 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2097 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2098 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2099 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2100 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2101 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2102 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2103 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2104 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2105 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2106 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2107 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2108 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2109 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2111 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2113 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2114 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2115 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2116 smul=\E[4m, tbc=\E[3g,
2117 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2119 qansi|QNX ansi with console writes,
2120 daisy, xhpa, use=qansi-g,
2122 qansi-t|QNX ansi without console writes,
2125 qansi-m|QNX ansi with mouse,
2127 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2128 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2129 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2130 smicm=\E[>2h, use=qansi,
2132 qansi-w|QNX ansi for windows,
2137 # SCO console and SOS-Syscons console for 386bsd
2138 # (scoansi: had unknown capabilities
2139 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2140 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2141 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2142 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2143 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2144 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2145 # on the <smacs>=\E[12m -- esr)
2147 # klone+sgr-dumb is an error since the acsc does not match -TD
2149 # In this description based on SCO's keyboard(HW) manpage list of default
2150 # function key values:
2151 # F13-F24 are shifted F1-F12
2152 # F25-F36 are control F1-F12
2153 # F37-F48 are shift+control F1-F12
2155 # hpa/vpa work in the console, but not in scoterm:
2159 # SCO's terminfo uses
2162 # which do not work (console or scoterm).
2164 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2165 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2166 OTbs, am, bce, eo, xon,
2167 colors#8, cols#80, it#8, lines#25, pairs#64,
2168 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2169 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2171 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2172 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2173 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2174 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2175 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2176 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2177 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2178 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2179 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2180 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2181 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2182 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2183 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2184 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2185 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2186 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2187 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2188 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2189 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2190 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2191 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2192 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2193 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2194 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2195 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2196 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2198 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2199 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2200 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2201 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2202 %p7%t;8%;%?%p9%t;12%e;10%;m,
2203 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2204 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2205 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2206 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2207 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2209 # make this easy to change...
2210 scoansi|SCO Extended ANSI standard crt,
2215 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2216 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2217 # for the application keypad mode. We have added iris-ansi-ap rather than
2218 # change the original to keypad mode.
2220 # (iris-ansi: added rmam/smam based on init string -- esr)
2222 # This entry, and those derived from it, is used in xwsh (also known as
2223 # winterm). Some capabilities that do not fit into the terminfo model
2224 # include the shift- and control-functionkeys:
2226 # F1-F12 generate different codes when shift or control modifiers are used.
2230 # control-F1 \E[025q
2232 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2233 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2235 # The cursor keys also have different codes:
2236 # control-up \E[162q
2237 # control-down \E[165q
2238 # control-left \E[159q
2239 # control-right \E[168q
2242 # shift-down \E[164q
2243 # shift-left \E[158q
2244 # shift-right \E[167q
2246 # control-tab \[072q
2248 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2250 cols#80, it#8, lines#40,
2251 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2252 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2253 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2254 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2255 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2256 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2257 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2258 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2259 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2260 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2261 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2262 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2263 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2264 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2265 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2266 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2267 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2268 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2269 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2271 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2272 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2273 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2275 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2276 # (T.Dickey 98/1/24)
2277 iris-color|xwsh|IRIX ANSI with color,
2279 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2280 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2281 rmul=\E[24m, rs1=\Ec,
2282 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2283 sitm=\E[3m, use=vt100+enq, use=klone+color,
2286 #### OpenBSD consoles
2288 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2290 # The following terminal descriptions for the AMD/Intel PC console
2291 # were prepared based on information contained in the OpenBSD-4.9
2292 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2294 # Added bce based on testing with tack -TD
2295 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2296 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2298 # Notes from testing with vttest:
2299 # fails wrapping test
2301 # identifies as vt200 with selective erase, but does not implement DECSCA
2304 # ESC # 8 DEC Screen Alignment Test (DECALN).
2305 # CSI ? 5 h Reverse Video (DECSCNM).
2307 pccon+keys|OpenBSD PC keyboard keys,
2308 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2309 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2310 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2311 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2312 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2313 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2314 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2315 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2317 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2318 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2320 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2322 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2323 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2325 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2326 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2328 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2329 # underline renders as color
2330 pccon+colors|ANSI colors for OpenBSD PC console,
2332 colors#8, ncv#2, pairs#64,
2333 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2334 pccon+base|base capabilities for OpenBSD PC console,
2335 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2336 cols#80, it#8, lines#24,
2337 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
2338 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2339 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2340 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2341 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2342 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2343 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2345 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2346 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2347 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2348 use=pccon0-m, use=pccon+colors,
2349 pccon-m|OpenBSD PC console without colors,
2350 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2351 pccon|OpenBSD PC console,
2352 use=pccon-m, use=pccon+colors,
2354 #### NetBSD consoles
2356 # pcvt termcap database entries (corresponding to release 3.31)
2357 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2359 # (For the terminfo master file, I translated these into terminfo syntax.
2360 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2361 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2362 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2364 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2365 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2366 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2367 pcvtXX|pcvt vt200 emulator (DEC VT220),
2368 am, km, mir, msgr, xenl,
2370 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2372 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2373 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2374 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2375 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2376 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2377 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2378 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2379 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2380 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2381 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2382 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2383 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2384 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2385 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2386 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2387 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2388 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2389 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2390 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2392 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2393 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2394 # 50 lines entries; 80 columns
2395 pcvt25|dec vt220 emulation with 25 lines,
2397 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2398 pcvt28|dec vt220 emulation with 28 lines,
2400 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2401 pcvt35|dec vt220 emulation with 35 lines,
2403 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2404 pcvt40|dec vt220 emulation with 40 lines,
2406 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2407 pcvt43|dec vt220 emulation with 43 lines,
2409 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2410 pcvt50|dec vt220 emulation with 50 lines,
2412 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2414 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2415 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2416 # 50 lines entries; 132 columns
2417 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2419 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2420 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2422 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2423 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2425 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2426 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2428 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2429 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2431 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2432 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2434 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2436 # OpenBSD implements a color variation
2437 pcvt25-color|dec vt220 emulation with 25 lines and color,
2439 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2440 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2441 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2442 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2443 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2446 # Terminfo entries to enable the use of the ncurses library in colour on a
2447 # NetBSD-arm32 console (only tested on a RiscPC).
2448 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2449 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2450 # typo in invis - TD
2451 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2452 am, bce, msgr, xenl, xon,
2453 cols#80, it#8, lines#30,
2454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2455 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2456 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2457 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2458 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2459 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2460 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2461 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2462 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2463 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2464 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2465 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2466 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2467 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2468 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2470 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2471 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2472 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2473 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2476 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2477 cols#132, lines#50, use=arm100,
2479 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2480 # manufactured by Sharp for the Japenese market.
2481 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2482 x68k|x68k-ite|NetBSD/x68k ITE,
2484 kclr=\E[9~, khlp=\E[28~, use=vt220,
2487 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2489 # (still unfinished, but good enough so far.)
2490 ofcons|DNARD OpenFirmware console,
2493 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2494 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2495 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2496 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2497 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2498 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2499 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2500 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2501 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2502 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2503 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2504 rmso=\2330m, rmul=\2330m,
2505 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2506 %;%?%p1%p3%|%t;7%;m,
2507 sgr0=\2330m, smso=\2337m, smul=\2334m,
2509 # NetBSD "wscons" emulator in vt220 mode.
2510 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2511 # The emulator renders underlined text in red. Colors are otherwise usable.
2513 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2514 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2515 # vt220 screens in vttest do not work with this emulator. For instance, it
2516 # identifies itself (primary DA response) as a vt220 with selective erase. But
2517 # the selective erase feature does not work. The secondary response is copied
2518 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2519 # the level of detail in a termcap, it is a passable emulator, since ECH does
2520 # work. Don't use it on a VMS system -TD
2521 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2523 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2524 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2525 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2526 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2527 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2528 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2529 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2531 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2534 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2536 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2537 # Initial testing set TERM=xterm, based on comments by developers, found too
2538 # many differences to continue in that path. However, test-results may be
2539 # useful to people curious about compatibility with xterm.
2541 # Testing with tack:
2543 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2544 # There is color-bleeding in the color-pairs screen.
2545 # Attributes do not work with color
2547 # Failed: kf1-kf4, kf13-kf48, khome, kend
2548 # (effectively xterm-r6 for function-keys)
2549 # None of the function or cursor key-modifiers are encoded.
2550 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2552 # Testing with vttest:
2553 # -------------------
2554 # Identifies as vt220 with selective erase
2555 # (however, selective erase refers to DECSCA, SPA)
2556 # Does not implement vt52
2557 # Uses spaces to simulate double-size characters
2558 # Does not support 8-bit controls
2559 # Does not support VT220 reports
2560 # Does not support send/receive mode
2561 # Supports ECH (like rxvt)
2562 # Does not support DECSCA
2563 # Does not support any of the ISO-6429 cursor-movement
2564 # Does not support any of the ISO-6429 miscellaneous tests
2565 # (SL/SR also leave unexpected char on screen too)
2566 # Background does not change in menu 11.6.9 (SGR 22-27)
2567 # None of the xterm special features tests work
2568 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2569 kbs=\177, use=wsvt25,
2571 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2573 rcons|BSD rasterconsole,
2575 # Color version of above. Color currently only provided by NetBSD.
2576 rcons-color|BSD rasterconsole with ANSI color,
2579 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2581 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2582 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2583 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2584 # -- compare with cons25w
2586 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2587 colors#8, cols#80, it#8, lines#18, pairs#64,
2588 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2589 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2590 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2591 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2592 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2593 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2594 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2595 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2596 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2597 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2598 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2599 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2600 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2601 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2602 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2603 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2605 #### FreeBSD console entries
2607 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2608 # Andrey Chernov maintains the FreeBSD termcap distributions.
2610 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2611 # or comment out the :cb: capability in the console entry.
2613 # Alexander Lukyanov reports:
2614 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2615 # Now el1 clears not only to the line beginning, but also a large chunk
2616 # of previous line. But there is another bug - ech does not work at all.
2620 # common entry without semigraphics
2621 # Bug: The <op> capability resets attributes.
2622 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2623 # instance el1 does if the cursor is moved to the right margin first. Removed
2624 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2626 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2627 # Note that this disables standout with color.
2629 # The emulator sends difference strings based on shift- and control-keys,
2631 # F13-F24 are shifted F1-F12
2632 # F25-F36 are control F1-F12
2633 # F37-F48 are shift+control F1-F12
2634 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2635 am, bce, bw, eo, msgr, npc,
2636 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2637 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2638 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2639 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2640 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2641 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2642 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2643 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2644 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2645 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2646 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2647 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2648 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2649 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2650 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2651 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2652 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2653 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2654 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2655 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2656 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2657 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2658 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2659 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2660 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2662 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2663 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2664 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2665 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2668 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2669 kbs=\177, kdch1=\E[3~, use=cons25,
2670 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2672 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2673 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2674 smul=\E[4m, use=cons25,
2675 cons30|ansi80x30|freebsd console (30-line ansi mode),
2676 lines#30, use=cons25,
2677 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2678 lines#30, use=cons25-m,
2679 cons43|ansi80x43|freebsd console (43-line ansi mode),
2680 lines#43, use=cons25,
2681 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2682 lines#43, use=cons25-m,
2683 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2684 lines#50, use=cons25,
2685 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2686 lines#50, use=cons25-m,
2687 cons60|ansi80x60|freebsd console (60-line ansi mode),
2688 lines#60, use=cons25,
2689 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2690 lines#60, use=cons25-m,
2691 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2692 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2693 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2696 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2698 op@, rmul=\E[m, setab@, setaf@,
2699 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2700 %t;30;1%;%?%p6%t;1%;m,
2701 smul=\E[4m, use=cons25r,
2702 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2703 lines#50, use=cons25r,
2704 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2705 lines#50, use=cons25r-m,
2706 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2707 lines#60, use=cons25r,
2708 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2709 lines#60, use=cons25r-m,
2710 # ISO 8859-1 FreeBSD console
2711 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2712 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2713 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2714 \226v\227w\230x\231y\232z\233~\237,
2716 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2718 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2719 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2720 smul=\E[4m, use=cons25l1,
2721 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2722 lines#50, use=cons25l1,
2723 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2724 lines#50, use=cons25l1-m,
2725 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2726 lines#60, use=cons25l1,
2727 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2728 lines#60, use=cons25l1-m,
2730 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2731 # which is intended to be xterm-compatible. See for example
2732 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2733 # in particular scterm-teken.c
2735 # For FreeBSD 9 and 10:
2736 # --------------------
2737 # The /etc/ttys entries for console and other ttys are all configured to set
2740 # Testing with tack:
2741 # There is no VT100 line-drawing (uses +'s and -'s)
2742 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2744 # Testing with vttest:
2745 # Menu 2 diamonds don't work, blink ditto, light background ditto
2746 # The terminal identifies itself as VT100 with AVO
2747 # There is no VT52 support
2748 # There is no doublesize character support
2749 # The terminal supports ECH (like rxvt)
2750 # The terminal does not support send/receive mode
2751 # The terminal supports all of the ISO-6429 cursor-movement
2752 # The terminal supports some of the ISO-6429 miscellaneous tests
2753 # (SL/SR also leave unexpected char on screen too)
2755 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2756 # the cells which happen to have ASCII control-character values:
2757 # - ^X arrow pointing up
2758 # . ^Y arrow pointing down
2762 # Those are removed from this entry's acsc string to avoid confusion.
2763 # The resulting description provides correct line-drawing and function-keys -TD
2764 teken|syscons with teken,
2766 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2767 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2768 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2769 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2770 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2771 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2772 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2773 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2774 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2775 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2777 #### 386BSD and BSD/OS Consoles
2780 # This was the original 386BSD console entry (I think).
2781 # Some places it's named oldpc3|oldibmpc3.
2782 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2783 origpc3|origibmpc3|IBM PC 386BSD Console,
2784 OTbs, am, bw, eo, xon,
2786 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2788 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2789 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2790 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2791 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2792 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2793 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2795 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2796 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2799 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2800 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2801 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2802 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2804 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2805 # Note, the emulator supports many of the additional console features
2806 # listed in the iBCS2 (e.g. character-set selection) though not all
2807 # are described here. This entry really ought to be upgraded.
2808 # Also note, the console will also work with fewer lines after doing
2809 # "stty rows NN", e.g. to use 24 lines.
2810 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2811 # Bug: The <op> capability resets attributes.
2812 bsdos-pc|IBM PC BSD/OS Console,
2813 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2814 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2815 use=bsdos-pc-nobold,
2817 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2818 use=klone+color, use=bsdos-pc-m,
2820 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2821 OTbs, am, eo, km, xon,
2822 cols#80, it#8, lines#25,
2823 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2824 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2825 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2826 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2827 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2828 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2829 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2830 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2831 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2834 # Old names for BSD/OS PC console used in releases before 4.1.
2835 pc3|BSD/OS on the PC Console,
2836 use=bsdos-pc-nobold,
2837 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2840 # BSD/OS on the SPARC
2841 bsdos-sparc|Sun SPARC BSD/OS Console,
2844 # BSD/OS on the PowerPC
2845 bsdos-ppc|PowerPC BSD/OS Console,
2850 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2852 # Actually (TD pointed this out at the time the acsc string was added):
2853 # vt52 shouldn't define full acsc since most of the cells don't match.
2854 # see vt100 manual page A-31. This is the list that does match:
2863 # The line-drawing happens to work in several terminal emulators, but should
2864 # not be used as a guide to the capabilities of the vt52. Note in particular
2865 # that vt52 does not support line-drawing characters (the scan-X values refer
2866 # to a crude plotting feature) -TD
2869 cols#80, it#8, lines#24,
2870 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2871 cub1=\ED, cud1=\EB, cuf1=\EC,
2872 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2873 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2874 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2876 #### DEC VT100 and compatibles
2878 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2879 # and micro consoles can be found in the `obsolete' section. More details on
2880 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2881 # found near the end of this file.
2883 # Except where noted, these entries are DEC's official terminfos.
2884 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2885 # Engineering for more information. Updated terminfos and termcaps
2886 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2888 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2889 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2890 # its name to Boundless Technologies; see http://www.boundless.com.
2893 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2894 # certainly includes what DEC called the `Level 1 editing extension' codes;
2895 # only the very oldest VT100s lacked these and there probably aren't any of
2896 # those left alive. To capture these, use one of the VT102 entries.
2898 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2899 # since the cursor is left in a different position while in the
2900 # weird state (concept at beginning of next line, vt100 at end
2901 # of this line) so all versions of vi before 3.7 don't handle
2902 # <xenl> right on vt100. The correct way to handle <xenl> is when
2903 # you output the char in column 80, immediately output CR LF
2904 # and then assume you are in column 1 of the next line. If <xenl>
2905 # is on, am should be on too.
2907 # I assume you have smooth scroll off or are at a slow enough baud
2908 # rate that it doesn't matter (1200? or less). Also this assumes
2909 # that you set auto-nl to "on", if you set it off use vt100-nam
2912 # The padding requirements listed here are guesses. It is strongly
2913 # recommended that xon/xoff be enabled, as this is assumed here.
2915 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2916 # tab settings are in non-volatile memory and don't need to be
2917 # reset upon login. Also setting the number of columns glitches
2918 # the screen annoyingly. You can type "reset" to get them set.
2920 # The VT100 series terminals have cursor ("arrows") keys which can operate
2921 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2922 # is the reset state, and is assumed to be the normal state. Application
2923 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2924 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2925 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2926 # was provided primarily as an aid to the porting of VT52 applications. It is
2927 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2928 # applications such as vi will always transmit the <smkx> string. Therefore,
2929 # the definitions for the cursor keys are made to match what the terminal
2930 # transmits after the <smkx> string is transmitted. If the <smkx> string
2931 # is a null string or is not defined, then cursor keys are assumed to be in
2932 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2933 # else the application may fail. It is also expected that applications will
2934 # always transmit the <rmkx> string to the terminal before they exit.
2936 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2937 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2938 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2939 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2940 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2941 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2942 # Enter key transmits the same as the Return key (Note: the Return key
2943 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2944 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2945 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2946 # is normally in Numeric Mode. If an application requires that the keypad be
2947 # in Application Mode then it is expected that the user, or the application,
2948 # will set the TERM environment variable to point to a terminfo entry which has
2949 # defined the <smkx> string to include the codes that switch the keypad into
2950 # Application Mode, and the terminfo entry will also define function key
2951 # fields to match the Application Mode control codes. If the <smkx> string
2952 # is a null string or is not defined, then the keypad is assumed to be in
2953 # Numeric Mode. If the <smkx> string switches the keypad into Application
2954 # Mode, it is expected that the <rmkx> string will contain the control codes
2955 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2956 # applications which transmit the <smkx> string will also always transmit the
2957 # <rmkx> string to the terminal before they exit.
2959 # Here's a diagram of the VT100 keypad keys with their bindings.
2960 # The top line is the name of the key (some DEC keyboards have the keys
2961 # labelled somewhat differently, like GOLD instead of PF1, but this is
2962 # the most "official" name). The second line is the escape sequence it
2963 # generates in Application Keypad mode (where "$" means the ESC
2964 # character). The third line contains two items, first the mapping of
2965 # the key in terminfo, and then in termcap.
2966 # _______________________________________
2967 # | PF1 | PF2 | PF3 | PF4 |
2968 # | $OP | $OQ | $OR | $OS |
2969 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2971 # | $Ow | $Ox | $Oy | $Om |
2972 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2974 # | $Ot | $Ou | $Ov | $Ol |
2975 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2977 # | $Oq | $Or | $Os | enter |
2978 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2981 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2983 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2984 # terminfo guidelines. That is a compromise used to assign the remaining
2985 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2987 vt100+keypad|dec vt100 numeric keypad no fkeys,
2988 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2989 vt100+pfkeys|dec vt100 numeric keypad,
2990 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2992 vt100+fnkeys|dec vt100 numeric keypad,
2993 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2994 kf9=\EOw, use=vt100+pfkeys,
2996 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2997 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2998 # use the 5-key arrangement to model the arrow keys as suggested in the
2999 # terminfo guidelines:
3000 # _______________________________________
3001 # | PF1 | PF2 | PF3 | PF4 |
3002 # | $OP | $OQ | $OR | $OS |
3003 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3005 # | $Ow | $Ox | $Oy | $Om |
3006 # |_ka1__K1_|_________|_ka3__K3_|_________|
3008 # | $Ot | $Ou | $Ov | $Ol |
3009 # |_________|_kb2__K2_|_________|_________|
3011 # | $Oq | $Or | $Os | enter |
3012 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3015 # |___________________|_________|_kent_@8_|
3017 vt220+keypad|dec vt220 numeric keypad,
3018 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3019 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3022 vt100+enq|ncurses extension for vt100-style ENQ,
3023 u8=\E[?1;2c, use=ansi+enq,
3024 vt102+enq|ncurses extension for vt102-style ENQ,
3025 u8=\E[?6c, use=ansi+enq,
3027 # And here, for those of you with orphaned VT100s lacking documentation, is
3028 # a description of the soft switches invoked when you do `Set Up'.
3030 # Scroll 0-Jump Shifted 3 0-#
3031 # | 1-Smooth | 1-British pound sign
3032 # | Autorepeat 0-Off | Wrap Around 0-Off
3034 # | | Screen 0-Dark Bkg | | New Line 0-Off
3035 # | | | 1-Light Bkg | | | 1-On
3036 # | | | Cursor 0-Underline | | | Interlace 0-Off
3037 # | | | | 1-Block | | | | 1-On
3039 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3041 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3042 # | | | 1-On | | | 1-50 Hz
3043 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3044 # | | 1-ANSI | | 1-8 Bits
3045 # | Keyclick 0-Off | Parity 0-Off
3047 # Margin Bell 0-Off Parity Sense 0-Odd
3050 # The following SET-UP modes are assumed for normal operation:
3051 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3052 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3053 # Other SET-UP modes may be set for operator convenience or communication
3054 # requirements; I recommend
3055 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3056 # Unless you have a graphics add-on such as Digital Engineering's VT640
3057 # (and even then, whenever it can be arranged!) you should set
3060 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3061 vt100|vt100-am|dec vt100 (w/advanced video),
3062 OTbs, am, mc5i, msgr, xenl, xon,
3063 cols#80, it#8, lines#24, vt#3,
3064 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3065 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3066 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3067 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3068 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3069 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3070 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3071 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
3072 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
3073 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
3074 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
3075 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
3076 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3077 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3078 %;m%?%p9%t\016%e\017%;$<2>,
3079 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
3080 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
3082 vt100nam|vt100-nam|vt100 no automargins,
3084 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3085 vt100-vb|dec vt100 (w/advanced video) & no beep,
3086 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3088 # Ordinary vt100 in 132 column ("wide") mode.
3089 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3091 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3092 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3093 cols#132, lines#14, vt@,
3094 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3096 # vt100 with no advanced video.
3097 vt100-nav|vt100 without advanced video option,
3099 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3101 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3102 cols#132, lines#14, use=vt100-nav,
3104 # vt100 with one of the 24 lines used as a status line.
3105 # We put the status line on the top.
3106 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3109 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3110 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3111 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3112 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3114 # Status line at bottom.
3115 # Clearing the screen will clobber status line.
3116 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3119 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3120 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3122 # Most of the `vt100' emulators out there actually emulate a vt102
3123 # This entry (or vt102-nsgr) is probably the right thing to use for
3126 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3128 vt102-w|dec vt102 in wide mode,
3130 rs3=\E[?3h, use=vt102,
3132 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3133 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3134 # string in the canonical vt100 entry above leaves the screen littered
3135 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3136 # after highlight turnoffs. This entry should fix that, and even leave
3137 # ACS support working, at the cost of making multiple-highlight changes
3138 # slightly more expensive.
3139 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3140 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3141 sgr@, sgr0=\E[m, use=vt102,
3143 # VT125 Graphics CRT. Clear screen also erases graphics
3144 # Some vt125's came configured with vt102 support.
3145 vt125|vt125 graphics terminal,
3147 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3149 # This isn't a DEC entry, it came from University of Wisconsin.
3150 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3153 cols#80, it#8, lines#24, vt#3,
3154 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3155 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3156 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
3157 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3158 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3159 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3160 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3161 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3162 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3164 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3165 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3166 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3168 # vt132 - like vt100 but slower and has ins/del line and such.
3169 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3170 # manual and from the ANSI standard, this describes the actual
3171 # terminal. I've never actually used a vt132 myself, so this
3176 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3177 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3179 # This vt220 description maps F5--F9 to the second block of function keys
3180 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3181 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3182 # PF1--PF4 are used as F1--F4.
3185 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3186 OTbs, OTpt, am, mir, msgr, xenl, xon,
3187 cols#80, lines#24, vt#3,
3189 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3190 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3191 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3192 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3193 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3194 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3195 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3196 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3197 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3198 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3199 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3200 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3201 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3202 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3203 rmso=\E[27m, rmul=\E[24m,
3204 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3205 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3206 %p9%t\E(0%e\E(B%;$<2>,
3207 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3208 smso=\E[7m, smul=\E[4m,
3210 # A much better description of the VT200/220; used to be vt220-8
3211 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3212 # designation to accommodate bug in pcvt -TD
3214 # Here's a picture of the VT220 editing keypad:
3215 # +--------+--------+--------+
3216 # | Find | Insert | Remove |
3217 # +--------+--------+--------+
3218 # | Select | Prev | Next |
3219 # +--------+--------+--------+
3220 vt220|vt200|dec vt220,
3221 OTbs, am, mir, msgr, xenl, xon,
3222 cols#80, it#8, lines#24, vt#3,
3223 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3224 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3225 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3226 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3227 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3228 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3229 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3230 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3231 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3232 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3233 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3234 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3235 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3236 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3237 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3238 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3239 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3240 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3241 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3242 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3244 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3245 %p9%t\E(0%e\E(B%;$<2>,
3246 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3247 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3249 vt220-w|vt200-w|DEC vt220 in wide mode,
3251 rs3=\E[?3h, use=vt220,
3252 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3253 OTbs, am, mc5i, mir, msgr, xenl, xon,
3254 cols#80, it#8, lines#24, vt#3,
3255 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3256 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3257 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3258 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3259 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3260 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3261 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3262 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3263 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3264 il=\233%p1%dL, il1=\233L, ind=\ED,
3265 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3266 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3267 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3268 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3269 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3270 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3271 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3272 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3273 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3274 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3275 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3276 rmul=\23324m, rs1=\233?3l, sc=\E7,
3277 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3278 %?%p9%t\E(0%e\E(B%;$<2>,
3279 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3280 smso=\2337m, smul=\2334m, tbc=\2333g,
3283 # This vt220 description regards F6--F10 as the second block of function keys
3284 # at the top of the keyboard. This mapping follows the description given
3285 # in the VT220 Programmer Reference Manual and agrees with the labeling
3286 # on some terminals that emulate the vt220. There is no support for an F5.
3287 # See vt220 for an alternate mapping.
3289 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3290 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3291 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3292 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3293 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3295 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3297 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3299 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3300 # (not an official DEC entry!)
3301 # The problem with real vt220 terminals is they don't send escapes when in
3302 # in vt220 mode. This can be gotten around two ways. 1> don't send
3303 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3304 # features of vt100 advanced video which it then has.
3306 # This entry takes the view of putting a vt220 into vt100 mode so
3307 # you can use the escape key in emacs and everything else which needs it.
3309 # You probably don't want to use this on a VMS machine since VMS will think
3310 # it has a vt220 and will get fouled up coming out of emacs
3312 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3313 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3315 vt200-js|vt220-js|dec vt200 series with jump scroll,
3318 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3319 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3320 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3321 ht=^I, il1=\E[L, ind=\ED,
3322 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3324 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3325 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3326 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3327 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3328 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3329 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3331 # This was DEC's vt320. Use the purpose-built one below instead
3332 #vt320|DEC VT320 in vt100 emulation mode,
3335 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3337 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3339 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3341 # These entries are not DEC's official ones, they were purpose-built for the
3342 # VT320. Here are the designer's notes:
3343 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3344 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3345 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3346 # Things that use <knxt> usually use tab anyways... and things that don't use
3347 # tab usually use <knxt> instead...
3348 # kprv is same as tab - Backtab is useless...
3349 # I left out <sgr> because of its RIDICULOUS complexity,
3350 # and the resulting fact that it causes the termcap translation of the entry
3351 # to SMASH the 1k-barrier...
3352 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3353 # (vt320: uncommented <fsl> --esr)
3354 vt320|vt300|dec vt320 7 bit terminal,
3355 am, hs, mir, msgr, xenl,
3356 cols#80, lines#24, wsl#80,
3357 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3358 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3359 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3361 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3362 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3363 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3364 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3365 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3366 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3367 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3368 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3369 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3370 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3371 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3372 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3373 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3374 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3375 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3377 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3379 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3380 %p9%t\E(0%e\E(B%;$<2>,
3381 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3382 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3383 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3384 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3386 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3387 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3388 # We have to init 132-col mode, not 80-col mode.
3389 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3391 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3392 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3393 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3395 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3396 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3398 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3399 # which are pretty much a superset of the VT320. They have the
3400 # host writable status line, yet another different DRCS matrix size,
3401 # and such, but they add the DEC Technical character set, Multiple text
3402 # pages, selectable length pages, and the like. The difference between
3403 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3404 # monitor, the former has 4 planes and a color monitor. These terminals
3405 # support VT131 and ANSI block mode, but as with much of these things,
3406 # termcap/terminfo doesn't deal with these features.
3408 # Note that this entry is are set up in what was the standard way for GNU
3409 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3410 # keys were switched into application mode at the same time the numeric pad
3411 # is switched into application mode. This changes the definitions of the
3412 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3413 # your termcap or terminfo entry,
3415 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3416 # (vt340: string capability "sb=\E[M" corrected to "sr";
3417 # also, added <rmam>/<smam> based on the init string -- esr)
3418 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3419 am, eslok, hs, mir, msgr, xenl, xon,
3420 cols#80, it#8, lines#24, vt#3,
3421 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3422 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3423 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3424 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3425 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3426 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3427 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3428 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3429 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3431 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3433 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3434 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3435 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3436 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3437 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3438 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3439 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3440 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3441 %p9%t\E(0%e\E(B%;$<2>,
3442 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3443 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3444 tsl=\E[2$~\E[1$}\E[1;%dH,
3446 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3447 # (originally written with vt420 as its primary name, and usable for it).
3449 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3450 # text pages and long text pages with selectable length of the vt340, along
3451 # with left and right margins, rectangular area text copy, fill, and erase
3452 # operations, selected region character attribute change operations,
3453 # page memory and rectangle checksums, insert/delete column, reception
3454 # macros, and other features too numerous to remember right now. TERMCAP
3455 # can only take advantage of a few of these added features.
3457 # Note that this entry is are set up in what was the standard way for GNU
3458 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3459 # keys were switched into application mode at the same time the numeric pad
3460 # is switched into application mode. This changes the definitions of the
3461 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3462 # your termcap entry,
3464 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3465 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3466 # also, added <rmam>/<smam> based on the init string -- esr)
3467 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3468 am, eslok, hs, mir, msgr, xenl, xon,
3469 cols#80, it#8, lines#24, vt#3,
3470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3471 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3472 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3473 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3474 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3476 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3477 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3478 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3479 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3480 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3481 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3483 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3484 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3485 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3486 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3487 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3488 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3489 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3490 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3491 %p9%t\E(0%e\E(B%;$<2>,
3492 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3493 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3494 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3496 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3497 # a missing <sc> -- esr)
3498 # add msgr and other capabilities from vt220 -TD
3500 am, mir, msgr, xenl, xon,
3501 cols#80, it#8, lines#24, vt#3,
3502 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3503 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3504 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3505 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3506 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3507 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3508 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3509 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3510 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3511 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3512 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3513 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3514 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3515 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3516 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3517 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3518 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3519 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3520 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3521 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3522 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3523 %p9%t\E(0%e\E(B%;$<2>,
3524 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3525 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3526 use=ansi+pp, use=dec+sl, use=ansi+enq,
3528 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3529 # takes two parameters, the key and the string. Translating the key is
3530 # straightforward (keys 1-5 are not defined on real terminals, though some
3531 # emulators define these):
3533 # if (key < 16) then value = key;
3534 # else if (key < 21) then value = key + 1;
3535 # else if (key < 25) then value = key + 2;
3536 # else if (key < 27) then value = key + 3;
projects / ncurses.git / blob