1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2017/04/22 20:18:54 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=\r, cud1=\n, ind=\n,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
314 kcud1=\n, nel=\r\n, .kbs=^H,
318 bel=^G, cr=\r, cud1=\n, ind=\n,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=\n, bel=^G, cud1=\n,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
375 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
376 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
378 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
380 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The normal (ANSI) flavor of "media copy" building block asserts that
385 # characters sent to the printer do not echo on the screen. DEC terminals
386 # can also be put into autoprinter mode, where each line is sent to the
387 # printer as you move off that line, e.g., by a carriage return.
388 ansi+pp|ansi printer port,
390 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
391 dec+pp|DEC autoprinter mode,
392 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
394 # The IBM PC alternate character set. Plug this into any Intel console entry.
395 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
396 # ROM graphics for control characters such as the diamond, up- and down-arrow.
397 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
398 # will work with any Intel console, they all seem to have inherited \E[11m
399 # from the ANSI.SYS de-facto standard.
400 klone+acs|alternate character set for ansi.sys displays,
401 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
402 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
403 \301w\302x\263y\363z\362{\343|\330}\234~\376,
404 rmacs=\E[10m, smacs=\E[11m,
406 # Highlight controls corresponding to the ANSI.SYS standard. Most
407 # console drivers for Intel boxes obey these. Makes the same assumption
408 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
409 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
410 klone+sgr|attribute control for ansi.sys displays,
411 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
412 rmso=\E[m, rmul=\E[m,
413 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
415 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
418 # Most Intel boxes do not treat "invis" (invisible) text.
419 klone+sgr8|attribute control for ansi.sys displays,
421 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
422 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
425 # Highlight controls corresponding to the ANSI.SYS standard. *All*
426 # console drivers for Intel boxes obey these. Does not assume \E[11m will
427 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
428 # diamond and arrow characters under curses.
429 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
430 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
432 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
433 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
434 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
437 # KOI8-R (RFC1489) acs (alternate character set)
438 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
439 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
440 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
441 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
442 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
444 rmacs=\E[10m, smacs=\E[11m,
446 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
447 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
448 # but equivalent strings that don't rely on that coincidence:
449 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
450 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
451 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
452 # They match a subset of ECMA-48.
453 klone+color|color control for ansi.sys and ISO6429-compatible displays,
454 colors#8, ncv#3, pairs#64,
455 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
457 # This is better than klone+color, it doesn't assume white-on-black as the
458 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
459 ecma+color|color control for ECMA-48-compatible terminals,
461 colors#8, ncv#3, pairs#64,
462 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
464 # Attribute control for ECMA-48-compatible terminals
465 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
466 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
468 ecma+strikeout|ECMA-48 strikeout/crossed-out,
469 rmxx=\E[29m, smxx=\E[9m,
471 # For comparison, here are all the capabilities implied by the Intel
472 # Binary Compatibility Standard (level 2) that fit within terminfo.
473 # For more detail on this rather pathetic standard, see the comments
474 # near the end of this file.
475 ibcs2|Intel Binary Compatibility Standard prescriptions,
476 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
477 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
478 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
479 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
480 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
481 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
482 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
485 #### ANSI/ECMA-48 terminals and terminal emulators
487 # See near the end of this file for details on ANSI conformance.
488 # Don't mess with these entries! Lots of other entries depend on them!
490 # This section lists entries in a least-capable to most-capable order.
491 # if you're in doubt about what `ANSI' matches yours, try them in that
492 # order and back off from the first that breaks.
494 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
495 # and more than one page of memory. It uses local motions instead of
496 # direct cursor addressing, and makes almost no assumptions. It does
497 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
498 ansi-mr|mem rel cup ansi,
500 cols#80, lines#24, use=vanilla, use=ansi+erase,
503 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
504 # beware of screen size problems and memory relative cursor addressing.
505 ansi-mini|any ansi terminal with pessimistic assumptions,
507 cols#80, lines#24, use=vanilla, use=ansi+cup,
510 # ansi-mtabs adds relative addressing and minimal tab support
511 ansi-mtabs|any ansi terminal with pessimistic assumptions,
513 ht=^I, use=ansi-mini, use=ansi+local1,
515 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
517 # The following is an entry for the full ANSI 3.64 (1977). It lacks
518 # padding, but most terminals using the standard are "fast" enough
519 # not to require any -- even at 9600 bps. If you encounter problems,
520 # try including the padding specifications.
522 # Note: the :as: and :ae: specifications are not implemented here, for
523 # the available termcap documentation does not make clear WHICH alternate
524 # character set to specify. ANSI 3.64 seems to make allowances for several.
525 # Please make the appropriate adjustments to fit your needs -- that is
526 # if you will be using alternate character sets.
528 # There are very few terminals running the full ANSI 3.64 standard,
529 # so I could only test this entry on one verified terminal (Visual 102).
530 # I would appreciate the results on other terminals sent to me.
532 # Please report comments, changes, and problems to:
534 # U.S. MAIL: Hugh Hansard
537 # Atlanta, GA. 30322.
539 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
541 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
542 ansi77|ansi 3.64 standard 1977 version,
544 cols#80, it#8, lines#24,
545 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
546 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
547 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
548 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
549 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
550 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
551 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
552 smso=\E[7m, smul=\E[4m,
554 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
555 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
556 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
557 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
558 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
559 # to confuse many emulators. On the other hand, we can count on these programs
560 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
561 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
562 # ANSI.SYS influence.
563 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
564 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
566 cols#80, it#8, lines#24,
567 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
568 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
569 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
570 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
571 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
573 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
574 lines#25, use=pcansi-m,
575 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
576 lines#33, use=pcansi-m,
577 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
578 lines#43, use=pcansi-m,
579 # The color versions. All PC emulators do color...
580 pcansi|ibm-pc terminal programs claiming to be ansi,
581 use=klone+color, use=pcansi-m,
582 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
583 lines#25, use=pcansi,
584 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
585 lines#33, use=pcansi,
586 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
587 lines#43, use=pcansi,
589 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
590 # If you want pound signs rather than dollars, replace `B' with `A'
591 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
592 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
593 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
595 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
596 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
597 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
598 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
599 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
600 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
601 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
602 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
603 vpa=\E[%i%p1%dd, use=pcansi-m,
605 ansi+enq|ncurses extension for ANSI ENQ,
606 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
609 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
610 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
611 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
612 ansi|ansi/pc-term compatible with color,
613 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
615 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
616 # all the normal ANSI stuff with no extensions. It assumes
617 # insert/delete line/char is there, so it won't work with
618 # vt100 clones. It assumes video attributes for bold, blink,
619 # underline, and reverse, which won't matter much if the terminal
620 # can't do some of those. Padding is assumed to be zero, which
621 # shouldn't hurt since xon/xoff is assumed.
622 ansi-generic|ansiterm|generic ansi standard terminal,
624 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
625 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
626 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
627 use=ansi+sgrbold, use=ansi+arrows,
629 #### DOS ANSI.SYS variants
631 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
632 # documentation (except for the keyboard key reassignment feature, which
633 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
634 # though undocumented. The <pfkey> capability is untested but should work for
635 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
636 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
637 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
638 OTbs, am, mir, msgr, xon,
640 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
641 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
642 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
643 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
644 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
645 u7=\E[6n, use=klone+color, use=klone+sgr8,
647 # Keypad: Home=\0G Up=\0H PrPag=\0I
648 # ka1,kh kcuu1 kpp,ka3
650 # Left=\0K 5=\0L Right=\0M
653 # End=\0O Down=\0P NxPag=\0Q
654 # kc1,kend kcud1 kc3,knp
659 # On keyboard with 12 function keys,
660 # shifted f-keys: F13-F24
661 # control f-keys: F25-F36
662 # alt f-keys: F37-F48
663 # The shift/control/alt keys do not modify each other, but alt overrides both,
664 # and control overrides shift.
666 # <pfkey> capability for F1-F48 -TD
667 ansi.sys|ANSI.SYS 3.1 and later versions,
668 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
669 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
670 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
671 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
672 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
673 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
674 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
675 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
676 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
677 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
678 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
679 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
680 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
681 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
682 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
686 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
687 # This should only be used when the terminal emulator cannot redefine the keys.
688 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
689 # definitions must be restored. If the terminal emulator is quit while in vi
690 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
691 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
692 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
693 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
694 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
695 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
696 # Consequently the End keypad key could not be set (it is relatively safe and
697 # actually useful because it sends ^@ O, which beeps and opens a line above).
698 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
699 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
700 \svi\s9-29-86\n\E[;75;8p,
701 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
702 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
703 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
704 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
707 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
708 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
709 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
710 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
713 # See ansi.sysk and nansi.sys above.
714 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
715 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
716 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
717 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
720 #### Atari ST terminals
722 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
724 tw52|tw52-color|Toswin window manager with color,
726 colors#16, pairs#256,
727 oc=\Eb?\Ec0, op=\Eb?\Ec0,
728 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
730 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
732 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
734 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
737 tw52-m|Toswin window manager monochrome,
740 bold=\Eya, dch1=\Ea, dim=\EyB,
741 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
742 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
743 smso=\EyQ, smul=\EyH, use=at-m,
744 tt52|Atari TT medium and high resolution,
745 lines#30, use=at-color,
746 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
748 colors#16, pairs#256,
749 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
750 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
751 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
752 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
753 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
755 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
756 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
757 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
758 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
760 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
761 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
762 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
763 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
765 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
768 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
771 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
773 cols#80, it#8, lines#24,
774 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
775 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
776 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
777 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
778 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
779 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
780 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
781 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
782 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
783 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
784 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
785 tw100|toswin vt100 window mgr,
787 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
788 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
790 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
791 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
792 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
793 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
794 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
795 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
796 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
797 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
798 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
799 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
800 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
801 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
802 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
803 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
804 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
805 rmso=\E[m, rmul=\E[m,
806 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
808 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
809 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
811 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
812 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
814 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
815 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
816 # The entries for stv52 and stv52pc probably need a revision.
817 stv52|MiNT virtual console,
819 cols#80, it#8, lines#30,
820 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
821 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
822 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
823 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
824 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
825 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
826 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
827 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
828 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
829 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
830 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
831 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
832 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
833 stv52pc|MiNT virtual console with PC charset,
835 cols#80, it#8, lines#30,
836 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
837 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
838 \363z\362{\343|\366}\234~\371,
839 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
840 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
841 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
842 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
843 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
844 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
845 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
846 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
847 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
848 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
849 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
850 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
853 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
856 cols#80, it#8, lines#25,
857 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
858 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
859 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
860 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
861 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
862 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
863 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
865 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
866 # MiNT VT52 emulation. 80 columns, 25 rows.
867 # MiNT is Now TOS, the operating system which comes with all Ataris now
868 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
869 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
870 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
871 st52-old|Atari ST with VT52 emulation,
874 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
875 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
876 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
877 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
878 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
879 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
880 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
881 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
882 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
885 #### Apple Terminal.app
887 # nsterm*|Apple_Terminal - AppKit Terminal.app
889 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
890 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
891 # Server and Mac OS X operating systems. There is also a
892 # "terminal.app" in GNUstep, but I believe it to be an unrelated
893 # codebase and I have not attempted to describe it here.
895 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
896 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
897 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
898 # version supports color.
900 # To determine the version of Terminal.app you're using by running:
902 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
904 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
906 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
908 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
910 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
912 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
914 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
915 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
916 # might work too, but really you're on your own here since these
917 # systems are very obsolete and I can't test them. I do welcome
918 # patches, though :).
922 # For GNUstep_Terminal, you're probably best off using "linux" or
923 # writing your own terminfo.
925 # For MacTelnet, you're on your own. It's a different codebase, and
926 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
928 # For iTerm.app, see "iterm".
931 # The AppKit Terminal.app descriptions all have names beginning with
932 # "nsterm". Note that the statusline (-s) versions use the window
933 # titlebar as a phony status line, and may produce warnings during
934 # compilation as a result ("tsl uses 0 parameters, expected 1".)
935 # Ignore these warnings, or even ignore these entries entirely. Apps
936 # which need to position the cursor or do other fancy stuff inside the
937 # status line won't work with these entries. They're primarily useful
938 # for programs like Pine which provide simple notifications in the
939 # status line. Please note that non-ASCII characters don't work right
940 # in the status line, since Terminal.app incorrectly interprets their
941 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
942 # versions) or only accepts status lines consisting entirely of
943 # characters from the first 256 Unicode positions (including C1 but
946 # The Mythology* of AppKit Terminal.app:
948 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
949 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
950 # shareware replacement for Terminal called "Stuart" which NeXT bought
951 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
952 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
953 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
954 # capabilities for the early versions, but I believe that the
955 # TERM_PROGRAM_VERSION may have been reset at some point.
957 # The early versions were tailored to the NeXT character set. Sometime
958 # after the Apple acquisition the encoding was switched to MacRoman
959 # (initially with serious altcharset bugs due to incomplete conversion
960 # of the old NeXT code,) and then later to UTF-8. Also sometime during
961 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
962 # 8-color support (initially buggy when combined with attributes, but
963 # that was later fixed.) More recently, around Mac OS X version 10.3
964 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
965 # some versions (for instance 133-1 which shipped with Mac OS X
966 # version 10.4) this suffered from the <bce> bug, but that seems to
967 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
969 # In the early days of Mac OS X the terminal was fairly buggy and
970 # would routinely crash under load. Many of these bugs seem to have
971 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
972 # some may still remain. This change seems to correspond to
973 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
976 # * This may correspond with what actually happened, but I don't
977 # know. It is based on guesswork, hearsay, private correspondence,
978 # my faulty memory, and the following online sources and references:
980 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
981 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
983 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
984 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
986 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
987 # "nsterm" to comply with the name length and case conventions and
988 # limitations of various software packages [notably Solaris terminfo
989 # and UNIX.] A single Apple_Terminal alias is retained for
990 # backwards-compatibility.
992 # * Added function key support (F1-F4). These only work in Terminal.app
993 # version 51, hopefully the capabilities won't cause problems for people
996 # * Added "full color" (-c) entries which support the 16-color mode in
999 # * By default, version 51 uses UTF-8 encoding with broken altcharset
1000 # support, so "ASCII" (-7) entries without altcharset support were
1003 # nsterm - AppKit Terminal.app
1005 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1006 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1007 # extensions. This terminfo was written to describe versions 41
1008 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1009 # version 10.1) of Terminal.app.
1011 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1012 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1013 # use, the executable for Terminal.app is:
1014 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1016 # If you're looking for a description of the full-screen system
1017 # console which runs under Apple's Darwin operating system on PowerPC
1018 # platforms, see the "xnuppc" entry instead.
1020 # There were no function keys in version 41. In version 51, there are
1021 # four working function keys (F1, F2, F3 and F4.) The function keys
1022 # are included in all of these entries.
1024 # It does not support mouse pointer position reporting. Under some
1025 # circumstances the cursor can be positioned using option-click; this
1026 # works by comparing the cursor position and the selected position,
1027 # and simulating enough cursor-key presses to move the cursor to the
1028 # selected position. This technique fails in all but the simplest
1031 # It provides partial ANSI color support (background colors interacted
1032 # badly with bold in version 41, though, as reflected in :ncv:.) The
1033 # monochrome (-m) entries are useful if you've disabled color support
1034 # or use a monochrome monitor. The full color (-c) entries are useful
1035 # in version 51, which doesn't exhibit the background color bug. They
1036 # also enable an xterm-compatible 16-color mode.
1038 # The configurable titlebar is set using xterm-compatible sequences;
1039 # it is used as a status bar in the statusline (-s) entries. Its width
1040 # depends on font sizes and window sizes, but 50 characters seems to
1041 # be the default for an 80x24 window.
1043 # The MacRoman character encoding is used for some of the alternate
1044 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1045 # disable alternate character set support entirely, and the "VT100"
1046 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1047 # graphics emulation, which seems to think the character encoding is
1048 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1049 # are useful in Terminal.app version 51, which supports UTF-8 and
1050 # other ASCII-compatible character encodings but does not correctly
1051 # implement VT100 graphics; once VT100 graphics are correctly
1052 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1053 # usable in any ASCII-compatible character encoding [except perhaps
1054 # in UTF-8, where some experts argue for disallowing alternate
1055 # characters entirely.]
1057 # Terminal.app reports "vt100" as the terminal type, but exports
1058 # several environment variables which may aid detection in a shell
1059 # profile (i.e. .profile or .login):
1062 # TERM_PROGRAM=Apple_Terminal
1063 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1064 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1066 # For example, the following Bourne shell script would detect the
1067 # correct terminal type:
1069 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1072 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1080 # In a C shell derivative, this would be accomplished by:
1082 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1083 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1084 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1085 # setenv TERM "nsterm-old"
1087 # setenv TERM "nsterm-c-7"
1092 # The '+' entries are building blocks
1093 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1094 am, bw, msgr, xenl, xon,
1095 cols#80, it#8, lines#24,
1096 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1097 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1098 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1099 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1100 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1101 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1102 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
1103 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1104 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1105 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1106 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1107 %p5%t;2%;%?%p7%t;8%;m,
1108 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1109 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1111 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1112 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1113 enacs=\E(B\E)0, rmacs=^O,
1114 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1115 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1116 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1118 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1119 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1120 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1121 \271|\255}\243~\245,
1122 enacs=\E(B\E)0, rmacs=^O,
1123 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1124 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1125 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1127 # compare with xterm+sl-twm
1128 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1129 wsl#50, use=xterm+sl-twm,
1131 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1132 op=\E[0m, use=ibm+16color,
1134 nsterm+c41|AppKit Terminal.app v41 color support,
1135 colors#8, ncv#37, pairs#64,
1136 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1138 # These are different combinations of the building blocks
1140 # ASCII charset (-7)
1141 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1144 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1145 use=nsterm+s, use=nsterm+7,
1147 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1148 use=nsterm+c41, use=nsterm+7,
1150 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1151 use=nsterm+c, use=nsterm+7,
1153 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1154 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1156 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1157 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1159 # VT100 alternate-charset (-acs)
1160 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1163 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1164 use=nsterm+s, use=nsterm+acs,
1166 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1167 use=nsterm+c41, use=nsterm+acs,
1169 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1170 use=nsterm+c, use=nsterm+acs,
1172 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1173 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1175 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1176 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1179 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1182 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1183 use=nsterm+s, use=nsterm+mac,
1185 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1186 use=nsterm+c41, use=nsterm+mac,
1188 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1189 use=nsterm+c, use=nsterm+mac,
1191 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1192 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1194 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1195 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1197 # In Mac OS X version 10.5 the format of the preferences has changed
1198 # and a new, more complex technique is needed, e.g.,
1200 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1201 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1202 # ud.init();prefs=ud.persistentDomainForName_(
1203 # "com.apple.Terminal");prefs["Window Settings"][
1204 # prefs["Default Window Settings"]]["TerminalType"
1205 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1206 # "com.apple.Terminal")' nsterm-16color
1208 # and it is still not settable from the preferences dialog. This is
1209 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1210 # in Apple's bug reporter.
1212 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1213 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1214 # vt52, vt100, vt102 and xterm.
1215 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1217 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1218 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1219 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1220 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1221 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1222 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1223 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1224 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1225 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1226 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1228 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1229 # the background color erase feature. The newer version 240.2 in Mac OS X
1230 # version 10.5 does not.
1232 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1233 # and D P Schreber comparing to nsterm-c-s-acs.
1235 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1236 # can be set in Terminal.app, e.g.,
1238 # defaults write com.apple.Terminal TermCapString nsterm-bce
1240 # and that it is not set in Terminal's preferences dialog.
1242 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1245 # * The terminal description matches the default settings.
1246 # * The keyboard is configurable via a dialog.
1247 # * By default khome, kend, knext and kprev are honored only with a
1249 # * There are bindings for control left/right arrow (but not up/down).
1250 # Added those to nsterm-16color, which is the version used for OS X 10.6
1251 # * "Allow VT100 application keypage mode" is by default disabled.
1252 # There is no way to press keypad-comma unless application mode is enabled
1254 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1255 # * CHT, REP, SU, SD are buggy.
1256 # * ECH works (also in Leopard), but is not used here for compatibility.
1257 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1258 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1259 # nsterm entry from this file to override the MacPorts (20110404) or
1260 # system (20081102) copy of this file.
1261 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1262 # dialog defaults to xterm-256color. Alternative selections are ansi,
1263 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1264 # the menu says "Declare terminal as" without promising to actually emulate
1265 # the corresponding terminals. Indeed, changing TERM does not affect the
1266 # emulation itself. This means that
1267 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1269 # + the color model is the same for each setting of TERM (does not match
1271 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1272 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1273 # + the vt52 emulation does not give a usable shell because screen-clearing
1274 # does not work as expected.
1275 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1276 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1277 # as well as unmasking F10 (which had been used in the window manager). Those
1278 # keys are listed in this entry.
1279 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1280 bce, use=nsterm-16color,
1282 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1283 # TERM_PROGRAM_VERSION=309
1284 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1285 # TERM_PROGRAM_VERSION=303
1286 nsterm-256color|Terminal.app in OS X 10.8,
1287 use=xterm+256setaf, use=nsterm-bce,
1289 nsterm-build326|Terminal.app in OS X 10.9,
1290 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1291 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1292 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1293 use=nsterm-256color,
1296 nsterm-build343|Terminal.app in OS X 10.10,
1297 kend=\EOF, khome=\EOH, use=nsterm-build326,
1299 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1301 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1302 # + f1-f4 map to pf1-pf4
1303 # + no vt220 support aside from DECTCEM and ECH
1304 # + there are no protected areas. Forget about anything above vt220.
1305 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1306 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1307 # + but bce fails for 11.6.7.2 (test repeat).
1308 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1309 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1310 # + normal (not X10 or Highlight tracking) mouse now works.
1311 # + mouse any-event works
1312 # + mouse button-event works
1313 # + in alternate screen:
1315 # mode 1047 fails to restore cursor position (do not use)
1316 # mode 1049 fails to restore screen contents (do not use)
1317 # + dtterm window-modify operations work (some messages are not printed)
1318 # + dtterm window-report gives size of window in characters/pixels as
1319 # well as state of window.
1321 # + there is no difference between cnorm/cvvis
1322 # + has dim/invis/blink (no protect of course)
1323 # + most function keys with shift/control modifiers give beep
1324 # (user can configure, but out-of-the-box is what I record)
1325 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1327 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1328 # + kLFT/kRIT work, but not up/down with shift-modifier
1329 # + there are a few predefined bindings with Alt, but no clear pattern.
1330 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1331 # Using ncurses test-program with xterm-new:
1333 # Using xterm's scripts:
1334 # + palette for 256-colors is hardcoded.
1335 # + no support for "dynamic colors"
1336 # + no support for tcap-query.
1337 nsterm-build361|Terminal.app in OS X 10.11,
1338 kmous=\E[M, use=nsterm-build343,
1340 # This is an alias which should always point to the "current" version
1341 nsterm|Apple_Terminal|AppKit Terminal.app,
1342 use=nsterm-build361,
1344 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1345 # more featureful) terminal emulator for Mac OS X. It is similar
1346 # enough in capabilities to nsterm-16color that I have derived this
1347 # description from that one, but as far as I know they share no code.
1348 # Many of the features are user-configurable, but I attempt only to
1349 # describe the default configuration.
1351 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1353 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1355 csr@, dim@, kend=\EOF, khome=\EOH,
1356 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1357 %p7%t;8%;m%?%p9%t\016%e\017%;,
1358 use=xterm+256setaf, use=nsterm-16color,
1360 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1362 # On PowerPC platforms, Apple's Darwin operating system uses a
1363 # full-screen system console derived from a NetBSD framebuffer
1364 # console. It is an ANSI-style terminal, and is not really VT-100
1367 # Under Mac OS X, this is the system console driver used while in
1368 # single-user mode [reachable by holding down Command-S during the
1369 # boot process] and when logged in using console mode [reachable by
1370 # typing ">console" at the graphical login prompt.]
1372 # If you're looking for a description of the Terminal.app terminal
1373 # emulator which runs under the Mac OS X Quartz windowing system (and
1374 # other AppKit-supported windowing systems,) see the "nsterm"
1377 # NOTE: Under Mac OS X version 10.1, the default login window does not
1378 # prompt for user name, instead requiring an icon to be selected from
1379 # a list of known users. Since the special ">console" login is not in
1380 # this list, you must make one of two changes in the Login Window
1381 # panel of the Login section of System Prefs to make the special
1382 # ">console" login accessible. The first option is to enable 'Show
1383 # "Other User" in list for network users', which will add a special
1384 # "Other..." icon to the graphical login panel. Selecting "Other..."
1385 # will present the regular graphical login prompt. The second option
1386 # is to change the 'Display Login Window as:' setting to 'Name and
1387 # password entry fields', which replaces the login panel with a
1388 # graphical login prompt.
1390 # There are no function keys, at least not in Darwin 1.3.
1392 # It has no mouse support.
1394 # It has full ANSI color support, and color combines correctly with
1395 # all three supported attributes: bold, inverse-video and underline.
1396 # However, bold colored text is almost unreadable (bolding is
1397 # accomplished using shifting and or-ing, and looks smeared) so bold
1398 # has been excluded from the list of color-compatible attributes
1399 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1400 # monochrome monitor.
1402 # There is one serious bug with this terminal emulation's color
1403 # support: repositioning the cursor onto a cell with non-matching
1404 # colors obliterates that cell's contents, replacing it with a blank
1405 # and displaying a colored cursor in the "current" colors. There is
1406 # no complete workaround at present [other than using the monochrome
1407 # (-m) entries,] but removing the (msgr) capability seemed to help.
1409 # The "standout" chosen was simple reverse-video, although a colorful
1410 # standout might be more aesthetically pleasing. Similarly, the bold
1411 # chosen is the terminal's own smeared bold, although a simple
1412 # color-change might be more readable. The color-bold (-b) entries
1413 # uses magenta colored text for bolding instead. The fancy color (-f
1414 # and -f2) entries use color for bold, standout and underlined text
1415 # (underlined text is still underlined, though.)
1417 # Apparently the terminal emulator does support a VT-100-style
1418 # alternate character set, but all the alternate character set
1419 # positions have been left blank in the font. For this reason, no
1420 # alternate character set capabilities have been included in this
1421 # description. The console driver appears to be ASCII-only, so (enacs)
1422 # has been excluded [although the VT-100 sequence does work.]
1424 # The default Mac OS X and Darwin installation reports "vt100" as the
1425 # terminal type, and exports no helpful environment variables. To fix
1426 # this, change the "console" entry in /etc/ttys from "vt100" to
1427 # "xnuppc-WxH", where W and H are the character dimensions of your
1428 # console (see below.)
1430 # The font used by the terminal emulator is apparently one originally
1431 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1432 # file includes descriptions for the following geometries:
1434 # Pixels Characters Entry Name (append -m for monochrome)
1435 # -------------------------------------------------------------------
1436 # 640x400 80x25 xnuppc-80x25
1437 # 640x480 80x30 xnuppc-80x30
1438 # 720x480 90x30 xnuppc-90x30
1439 # 800x600 100x37 xnuppc-100x37
1440 # 896x600 112x37 xnuppc-112x37
1441 # 1024x640 128x40 xnuppc-128x40
1442 # 1024x768 128x48 xnuppc-128x48
1443 # 1152x768 144x48 xnuppc-144x48
1444 # 1280x1024 160x64 xnuppc-160x64
1445 # 1600x1024 200x64 xnuppc-200x64
1446 # 1600x1200 200x75 xnuppc-200x75
1447 # 2048x1536 256x96 xnuppc-256x96
1449 # The basic "xnuppc" entry includes no size information, and the
1450 # emulator includes no reporting capability, so you'll be at the mercy
1451 # of the TTY device (which reports incorrectly on my hardware.) The
1452 # color-bold entries do not include size information.
1454 # The '+' entries are building blocks
1455 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1458 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1459 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1460 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1461 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1462 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
1463 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1464 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1465 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1467 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1468 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1469 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1471 xnuppc+c|Darwin PowerPC Console ANSI color support,
1472 colors#8, ncv#32, pairs#64,
1473 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1475 xnuppc+b|Darwin PowerPC Console color-bold support,
1478 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1481 xnuppc+f|Darwin PowerPC Console fancy color support,
1483 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1485 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1487 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1490 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1491 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1493 # Building blocks for specific screen sizes
1494 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1497 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1500 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1503 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1506 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1509 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1512 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1515 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1518 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1521 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1524 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1527 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1530 # These are different combinations of the building blocks
1532 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1535 xnuppc|darwin|Darwin PowerPC Console (color),
1536 use=xnuppc+c, use=xnuppc+basic,
1538 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1541 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1542 use=xnuppc+b, use=xnuppc+c,
1544 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1547 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1548 use=xnuppc+f, use=xnuppc+c,
1550 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1553 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1554 use=xnuppc+f2, use=xnuppc+c,
1556 # Combinations for specific screen sizes
1557 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1558 use=xnuppc+80x25, use=xnuppc+basic,
1560 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1561 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1563 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1564 use=xnuppc+80x30, use=xnuppc+basic,
1566 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1567 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1569 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1570 use=xnuppc+90x30, use=xnuppc+basic,
1572 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1573 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1575 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1576 use=xnuppc+100x37, use=xnuppc+basic,
1578 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1579 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1581 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1582 use=xnuppc+112x37, use=xnuppc+basic,
1584 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1585 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1587 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1588 use=xnuppc+128x40, use=xnuppc+basic,
1590 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1591 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1593 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1594 use=xnuppc+128x48, use=xnuppc+basic,
1596 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1597 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1599 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1600 use=xnuppc+144x48, use=xnuppc+basic,
1602 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1603 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1605 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1606 use=xnuppc+160x64, use=xnuppc+basic,
1608 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1609 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1611 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1612 use=xnuppc+200x64, use=xnuppc+basic,
1614 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1615 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1617 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1618 use=xnuppc+200x75, use=xnuppc+basic,
1620 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1621 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1623 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1624 use=xnuppc+256x96, use=xnuppc+basic,
1626 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1627 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1632 # BeOS entry for Terminal program Seems to be almost ANSI
1633 beterm|BeOS Terminal,
1634 am, eo, mir, msgr, xenl, xon,
1635 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1636 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1637 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1638 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1639 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1640 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1641 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1642 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1643 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
1644 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1645 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1646 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1647 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1648 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1649 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1650 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1651 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1652 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1653 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1654 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1660 # This entry is good for the 1.2.13 or later version of the Linux console.
1662 # ***************************************************************************
1665 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1666 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1667 # * character. Here are the keymap replacement lines that will set this up: *
1669 # keycode 15 = Tab Tab
1670 # alt keycode 15 = Meta_Tab
1671 # shift keycode 15 = F26
1672 # string F26 ="\033[Z"
1674 # * This has to use a key slot which is unfortunate (any unused one will *
1675 # * do, F26 is the higher-numbered one). The change ought to be built *
1676 # * into the kernel tables. *
1678 # ***************************************************************************
1680 # All linux kernels since 1.2.13 (at least) set the screen size
1681 # themselves; this entry assumes that capability.
1683 linux-basic|linux console,
1684 am, bce, eo, mir, msgr, xenl, xon,
1686 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1687 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1688 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1689 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1690 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1691 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1692 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1693 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1694 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1695 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1696 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1697 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1698 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1699 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1700 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1701 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1702 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1703 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1704 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1705 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1706 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1707 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1708 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1709 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1712 linux-m|Linux console no color,
1714 setab@, setaf@, setb@, setf@, use=linux,
1716 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1717 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1718 # not supposedly back-portable to older SV curses (although it has worked fine
1719 # on Solaris for several years) and not supported in ncurses versions before
1721 linux-c-nc|linux console with color-change,
1723 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1724 %02x%p4%{255}%*%{1000}%/%02x,
1725 oc=\E]R, use=linux-basic,
1726 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1727 linux-c|linux console 1.3.6+ for older ncurses,
1729 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1730 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1731 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1732 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1733 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1734 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1735 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1736 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1738 oc=\E]R, use=linux-basic,
1740 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1741 # get a block cursor for cvvis.
1742 # reported by Frank Heckenbach <frank@g-n-u.de>.
1743 linux2.2|linux 2.2.x console,
1744 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1745 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1747 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1748 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1749 # Although the kernel has mappings for these, they were not in the default
1750 # font (tested with Debian and Fedora):
1756 linux2.6|linux 2.6.x console,
1757 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1759 enacs=\E)0, rmacs=^O,
1760 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1761 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1762 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1764 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1765 # It is the same as xterm's erase-saved-lines feature.
1766 linux3.0|linux 3.0 kernels,
1767 E3=\E[3J, use=linux2.6,
1769 # This is Linux console for ncurses.
1770 linux|linux console,
1773 # Subject: linux 2.6.26 vt back_color_erase
1774 # Changes to the Linux console driver broke bce model as reported in
1775 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1777 # http://lkml.org/lkml/2008/4/26/305
1778 # http://lkml.org/lkml/2008/10/3/66
1779 linux2.6.26|linux console w/o bce,
1782 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1783 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1784 ich@, ich1@, use=linux,
1786 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1787 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1788 linux-koi8|linux with koi8 alternate character set,
1789 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1790 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1791 \211w\210x\201y\230z\231{\267|\274~\224,
1792 use=linux, use=klone+koi8acs,
1794 # Another entry for KOI8-r with Qing Long's acsc.
1795 # (which one better complies with the standard?)
1796 linux-koi8r|linux with koi8-r alternate character set,
1797 use=linux, use=klone+koi8acs,
1799 # Entry for the latin1 and latin2 fonts
1800 linux-lat|linux with latin1 or latin2 alternate character set,
1801 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1802 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1803 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1806 # This uses graphics from VT codeset instead of from cp437.
1807 # reason: cp437 (aka "straight to font") is not functional under luit.
1808 # from: Andrey V Lukyanov <land@long.yar.ru>.
1809 linux-vt|linux console using VT codes for graphics,
1810 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1812 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1815 # This is based on the Linux console (relies on the console to perform some
1816 # of the functionality), but does not recognize as many control sequences.
1817 # The program comes bundled with an old (circa 1998) copy of the Linux
1818 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1819 # \E* move cursor to home, as as \E[H
1821 # \EE move cursor to beginning of row
1822 # \E[y,xf same as \E[y,xH
1824 # Note: The status-line support is buggy (dsl does not work).
1825 kon|kon2|jfbterm|Kanji ON Linux console,
1827 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1828 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1832 # Another variant. There are two parts (src, src/lib) with the latter
1833 # comprising the escape-sequence parsing. The copyright notice on that
1834 # says it is based on GTerm by Timothy Miller.
1836 # The original developer "dragchan" has left, but as of March 2017 there is
1837 # (still dead) code from May 2015 here:
1838 # https://github.com/izmntuk/fbterm
1840 # The acsc string may be incorrect.
1842 # Not used here, the program recognizes escapes for italic, underline and
1843 # dim, rendering those as green, cyan and gray respectively.
1844 fbterm|FbTerm for Linux with framebuffer,
1845 colors#256, pairs#32767,
1846 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1847 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1848 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1849 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1850 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1851 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1852 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1853 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1855 # 16-color linux console entry; this works with a 256-character
1856 # console font but bright background colors turn into dim ones when
1857 # you use a 512-character console font. This uses bold for bright
1858 # foreground colors and blink for bright background colors.
1859 linux-16color|linux console with 16 colors,
1860 colors#16, ncv#42, pairs#256,
1861 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1862 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1865 # bterm (bogl 0.1.18)
1866 # Implementation is in bogl-term.c
1867 # Key capabilities from linux terminfo entry
1870 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1871 # bterm does not support sgr, since it only processes one parameter -TD
1872 bterm|bogl virtual terminal,
1874 colors#8, cols#80, lines#24, pairs#64,
1875 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1876 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1877 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1878 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1879 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1880 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1881 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1882 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1883 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1884 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1885 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
1886 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1887 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1888 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1893 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1896 cols#80, it#8, lines#25,
1897 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1898 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1899 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1900 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1901 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1902 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1903 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1904 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1905 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1906 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1907 smso=\E[7m, smul=\E[4m,
1908 mach-bold|Mach Console with bold instead of underline,
1909 rmul=\E[0m, smul=\E[1m, use=mach,
1910 mach-color|Mach Console with ANSI color,
1912 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1913 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1915 # From: Samuel Thibault
1916 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1917 # Files: i386/i386at/kd.c
1919 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1921 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1922 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1923 \263y\363z\362{\343|\330}\234~\376,
1924 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1925 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1926 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1927 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1928 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1931 mach-gnu-color|Mach Console with ANSI color,
1933 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1934 setaf=\E[3%p1%dm, use=mach-gnu,
1936 # From: Marcus Brinkmann
1937 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1939 # Comments in the original are summarized here:
1941 # hurd uses 8-bit characters (km).
1943 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1945 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1946 # have the eat_newline_glitch. It doesn't support setting or removing tab
1949 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1950 # one byte instead three.
1952 # <ich1> is not included because hurd has insert mode.
1954 # hurd doesn't use ^J for scrolling, because this could put things into the
1955 # scrollback buffer.
1957 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1958 # This is a GNU extension.
1960 # The original has commented-out ncv, but is restored here.
1962 # Reading the source, RIS resets cnorm, but not xmous.
1963 hurd|The GNU Hurd console server,
1964 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1965 colors#8, it#8, ncv#18, pairs#64,
1966 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1968 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1969 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1970 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1971 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1972 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1973 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1974 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1975 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1976 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1977 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1978 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1979 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1980 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1981 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1982 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1983 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1984 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1985 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1986 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1987 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1988 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1989 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1990 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1991 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1992 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1999 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
2000 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
2001 # right corner without triggering a scroll. The ncurses terminfo library can
2002 # handle this case with the <ich1> capability, and prefers <am> for better
2003 # optimization. Bug: The <op> capability resets attributes.
2004 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
2005 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
2006 qnx|qnx4|qnx console,
2007 daisy, km, mir, msgr, xhpa, xt,
2008 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
2009 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
2010 \303u\264v\301w\302x\263,
2011 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
2012 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
2013 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
2014 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
2015 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
2016 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
2017 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
2018 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
2019 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
2020 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
2021 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
2022 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
2023 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
2024 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
2025 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
2026 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2027 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2028 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2029 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2030 kext=\377\270, kf1=\377\201, kf10=\377\212,
2031 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2032 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2033 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2034 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2035 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2036 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2037 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2038 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2039 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2040 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2041 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2042 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2043 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2044 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2045 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2046 khlp=\377\350, khome=\377\240, khts=\377\342,
2047 kich1=\377\253, kil1=\377\273, kind=\377\261,
2048 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2049 knp=\377\252, knxt=\377\312, kopn=\377\357,
2050 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2051 kprv=\377\302, krdo=\377\336, kref=\377\354,
2052 kres=\377\360, krfr=\377\347, kri=\377\271,
2053 krmir=\377\313, krpl=\377\362, krst=\377\352,
2054 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2055 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2056 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2057 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2058 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2062 qnxt|qnxt4|QNX4 terminal,
2065 qnxm|QNX4 with mouse events,
2067 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2068 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2069 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2070 smicm=\E/>2h, use=qnx4,
2075 # Monochrome QNX4 terminal or console. Setting this terminal type will
2076 # allow an application running on a color console to behave as if it
2077 # were a monochrome terminal. Output will be through stdout instead of
2078 # console writes because the term routines will recognize that the
2079 # terminal name starts with 'qnxt'.
2081 qnxtmono|Monochrome QNX4 terminal or console,
2085 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2086 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2087 # (TD: derive from original qnx4 entry)
2088 qnxt2|qnx 2.15 serial terminal,
2090 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2091 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2093 # QNX ANSI terminal definition
2096 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2097 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2098 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2099 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
2100 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2101 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2102 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2103 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2104 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2105 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2106 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2107 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2108 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2109 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2110 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2111 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2112 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2113 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2114 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2115 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2116 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2117 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2118 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2119 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2120 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2121 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2122 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2123 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2124 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2125 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2126 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2127 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2128 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2129 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2130 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2131 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2132 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2133 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2134 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2135 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2136 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2138 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2140 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2141 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2142 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2143 smul=\E[4m, tbc=\E[3g,
2144 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2146 qansi|QNX ansi with console writes,
2147 daisy, xhpa, use=qansi-g,
2149 qansi-t|QNX ansi without console writes,
2152 qansi-m|QNX ansi with mouse,
2154 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2155 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2156 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2157 smicm=\E[>2h, use=qansi,
2159 qansi-w|QNX ansi for windows,
2164 # SCO console and SOS-Syscons console for 386bsd
2165 # (scoansi: had unknown capabilities
2166 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2167 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2168 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2169 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2170 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2171 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2172 # on the <smacs>=\E[12m -- esr)
2174 # klone+sgr-dumb is an error since the acsc does not match -TD
2176 # In this description based on SCO's keyboard(HW) manpage list of default
2177 # function key values:
2178 # F13-F24 are shifted F1-F12
2179 # F25-F36 are control F1-F12
2180 # F37-F48 are shift+control F1-F12
2182 # hpa/vpa work in the console, but not in scoterm:
2186 # SCO's terminfo uses
2189 # which do not work (console or scoterm).
2191 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2192 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2193 OTbs, am, bce, eo, xon,
2194 colors#8, cols#80, it#8, lines#25, pairs#64,
2195 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2196 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2198 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2199 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2200 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2201 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2202 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2203 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2204 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2205 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2206 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2207 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2208 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2209 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2210 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2211 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2212 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2213 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2214 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2215 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2216 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2217 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2218 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2219 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2220 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2221 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2222 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2223 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2225 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2226 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2227 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2228 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2229 %p7%t;8%;%?%p9%t;12%e;10%;m,
2230 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2231 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2232 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2233 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2234 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2236 # make this easy to change...
2237 scoansi|SCO Extended ANSI standard crt,
2242 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2243 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2244 # for the application keypad mode. We have added iris-ansi-ap rather than
2245 # change the original to keypad mode.
2247 # (iris-ansi: added rmam/smam based on init string -- esr)
2249 # This entry, and those derived from it, is used in xwsh (also known as
2250 # winterm). Some capabilities that do not fit into the terminfo model
2251 # include the shift- and control-functionkeys:
2253 # F1-F12 generate different codes when shift or control modifiers are used.
2257 # control-F1 \E[025q
2259 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2260 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2262 # The cursor keys also have different codes:
2263 # control-up \E[162q
2264 # control-down \E[165q
2265 # control-left \E[159q
2266 # control-right \E[168q
2269 # shift-down \E[164q
2270 # shift-left \E[158q
2271 # shift-right \E[167q
2273 # control-tab \[072q
2275 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2277 cols#80, it#8, lines#40,
2278 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2279 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
2280 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
2281 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2282 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2283 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2284 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2285 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2286 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2287 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2288 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
2289 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
2290 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
2291 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
2292 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
2293 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
2294 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
2295 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2296 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2298 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2299 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2300 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2302 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2303 # (T.Dickey 98/1/24)
2304 iris-color|xwsh|IRIX ANSI with color,
2306 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2307 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2308 rmul=\E[24m, rs1=\Ec,
2309 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2310 sitm=\E[3m, use=vt100+enq, use=klone+color,
2313 #### OpenBSD consoles
2315 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2317 # The following terminal descriptions for the AMD/Intel PC console
2318 # were prepared based on information contained in the OpenBSD-4.9
2319 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2321 # Added bce based on testing with tack -TD
2322 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2323 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2325 # Notes from testing with vttest:
2326 # fails wrapping test
2328 # identifies as vt200 with selective erase, but does not implement DECSCA
2331 # ESC # 8 DEC Screen Alignment Test (DECALN).
2332 # CSI ? 5 h Reverse Video (DECSCNM).
2334 pccon+keys|OpenBSD PC keyboard keys,
2335 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2336 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
2337 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2338 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2339 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2340 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2341 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2342 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2344 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2345 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2347 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2349 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2350 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2352 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2353 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2355 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2356 # underline renders as color
2357 pccon+colors|ANSI colors for OpenBSD PC console,
2359 colors#8, ncv#2, pairs#64,
2360 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2361 pccon+base|base capabilities for OpenBSD PC console,
2362 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2363 cols#80, it#8, lines#24,
2364 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
2365 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2366 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2367 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2368 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2369 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2370 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2372 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2373 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2374 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2375 use=pccon0-m, use=pccon+colors,
2376 pccon-m|OpenBSD PC console without colors,
2377 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2378 pccon|OpenBSD PC console,
2379 use=pccon-m, use=pccon+colors,
2381 #### NetBSD consoles
2383 # pcvt termcap database entries (corresponding to release 3.31)
2384 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2386 # (For the terminfo master file, I translated these into terminfo syntax.
2387 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2388 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2389 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2391 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2392 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2393 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2394 pcvtXX|pcvt vt200 emulator (DEC VT220),
2395 am, km, mir, msgr, xenl,
2397 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2399 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2400 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
2401 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2402 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2403 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2404 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2405 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2406 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2407 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
2408 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2409 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2410 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2411 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2412 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2413 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2414 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2415 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2416 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2417 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2419 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2420 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2421 # 50 lines entries; 80 columns
2422 pcvt25|dec vt220 emulation with 25 lines,
2424 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2425 pcvt28|dec vt220 emulation with 28 lines,
2427 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2428 pcvt35|dec vt220 emulation with 35 lines,
2430 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2431 pcvt40|dec vt220 emulation with 40 lines,
2433 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2434 pcvt43|dec vt220 emulation with 43 lines,
2436 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2437 pcvt50|dec vt220 emulation with 50 lines,
2439 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2441 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2442 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2443 # 50 lines entries; 132 columns
2444 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2446 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2447 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2449 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2450 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2452 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2453 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2455 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2456 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2458 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2459 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2461 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2463 # OpenBSD implements a color variation
2464 pcvt25-color|dec vt220 emulation with 25 lines and color,
2466 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2467 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2468 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2469 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2470 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2473 # Terminfo entries to enable the use of the ncurses library in colour on a
2474 # NetBSD-arm32 console (only tested on a RiscPC).
2475 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2476 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2477 # typo in invis - TD
2478 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2479 am, bce, msgr, xenl, xon,
2480 cols#80, it#8, lines#30,
2481 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2482 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2483 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2484 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2485 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2486 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2487 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2488 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
2489 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2490 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2491 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2492 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2493 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2494 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2495 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2497 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2498 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2499 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2500 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2503 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2504 cols#132, lines#50, use=arm100,
2506 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2507 # manufactured by Sharp for the Japanese market.
2508 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2509 x68k|x68k-ite|NetBSD/x68k ITE,
2511 kclr=\E[9~, khlp=\E[28~, use=vt220,
2514 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2516 # (still unfinished, but good enough so far.)
2517 ofcons|DNARD OpenFirmware console,
2520 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
2521 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2522 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2523 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2524 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2525 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2526 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
2527 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2528 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2529 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2530 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
2531 rmso=\2330m, rmul=\2330m,
2532 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2533 %;%?%p1%p3%|%t;7%;m,
2534 sgr0=\2330m, smso=\2337m, smul=\2334m,
2536 # NetBSD "wscons" emulator in vt220 mode.
2537 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2538 # The emulator renders underlined text in red. Colors are otherwise usable.
2540 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2541 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2542 # vt220 screens in vttest do not work with this emulator. For instance, it
2543 # identifies itself (primary DA response) as a vt220 with selective erase. But
2544 # the selective erase feature does not work. The secondary response is copied
2545 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2546 # the level of detail in a termcap, it is a passable emulator, since ECH does
2547 # work. Don't use it on a VMS system -TD
2548 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2550 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2551 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2552 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2553 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2554 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2555 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2556 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2558 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2561 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2563 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2564 # Initial testing set TERM=xterm, based on comments by developers, found too
2565 # many differences to continue in that path. However, test-results may be
2566 # useful to people curious about compatibility with xterm.
2568 # Testing with tack:
2570 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2571 # There is color-bleeding in the color-pairs screen.
2572 # Attributes do not work with color
2574 # Failed: kf1-kf4, kf13-kf48, khome, kend
2575 # (effectively xterm-r6 for function-keys)
2576 # None of the function or cursor key-modifiers are encoded.
2577 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2579 # Testing with vttest:
2580 # -------------------
2581 # Identifies as vt220 with selective erase
2582 # (however, selective erase refers to DECSCA, SPA)
2583 # Does not implement vt52
2584 # Uses spaces to simulate double-size characters
2585 # Does not support 8-bit controls
2586 # Does not support VT220 reports
2587 # Does not support send/receive mode
2588 # Supports ECH (like rxvt)
2589 # Does not support DECSCA
2590 # Does not support any of the ISO-6429 cursor-movement
2591 # Does not support any of the ISO-6429 miscellaneous tests
2592 # (SL/SR also leave unexpected char on screen too)
2593 # Background does not change in menu 11.6.9 (SGR 22-27)
2594 # None of the xterm special features tests work
2595 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2598 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2600 rcons|BSD rasterconsole,
2602 # Color version of above. Color currently only provided by NetBSD.
2603 rcons-color|BSD rasterconsole with ANSI color,
2606 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2608 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2609 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2610 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2611 # -- compare with cons25w
2613 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2614 colors#8, cols#80, it#8, lines#18, pairs#64,
2615 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2616 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2617 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2618 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2619 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2620 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2621 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2622 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2623 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2624 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2625 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2626 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2627 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2628 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2629 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2630 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2632 #### FreeBSD console entries
2634 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2635 # Andrey Chernov maintains the FreeBSD termcap distributions.
2637 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2638 # or comment out the :cb: capability in the console entry.
2640 # Alexander Lukyanov reports:
2641 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2642 # Now el1 clears not only to the line beginning, but also a large chunk
2643 # of previous line. But there is another bug - ech does not work at all.
2647 # common entry without semigraphics
2648 # Bug: The <op> capability resets attributes.
2649 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2650 # instance el1 does if the cursor is moved to the right margin first. Removed
2651 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2653 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2654 # Note that this disables standout with color.
2656 # The emulator sends difference strings based on shift- and control-keys,
2658 # F13-F24 are shifted F1-F12
2659 # F25-F36 are control F1-F12
2660 # F37-F48 are shift+control F1-F12
2661 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2662 am, bce, bw, eo, msgr, npc,
2663 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2664 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2665 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2666 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2667 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2668 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2669 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2670 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2671 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2672 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2673 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2674 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2675 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2676 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2677 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2678 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2679 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2680 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2681 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2682 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2683 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2684 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2685 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2686 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2687 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2689 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2690 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2691 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2692 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2695 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2696 kbs=^?, kdch1=\E[3~, use=cons25,
2697 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2699 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2700 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2701 smul=\E[4m, use=cons25,
2702 cons30|ansi80x30|freebsd console (30-line ansi mode),
2703 lines#30, use=cons25,
2704 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2705 lines#30, use=cons25-m,
2706 cons43|ansi80x43|freebsd console (43-line ansi mode),
2707 lines#43, use=cons25,
2708 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2709 lines#43, use=cons25-m,
2710 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2711 lines#50, use=cons25,
2712 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2713 lines#50, use=cons25-m,
2714 cons60|ansi80x60|freebsd console (60-line ansi mode),
2715 lines#60, use=cons25,
2716 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2717 lines#60, use=cons25-m,
2718 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2719 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2720 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2723 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2725 op@, rmul=\E[m, setab@, setaf@,
2726 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2727 %t;30;1%;%?%p6%t;1%;m,
2728 smul=\E[4m, use=cons25r,
2729 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2730 lines#50, use=cons25r,
2731 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2732 lines#50, use=cons25r-m,
2733 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2734 lines#60, use=cons25r,
2735 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2736 lines#60, use=cons25r-m,
2737 # ISO 8859-1 FreeBSD console
2738 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2739 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2740 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2741 \226v\227w\230x\231y\232z\233~\237,
2743 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2745 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2746 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2747 smul=\E[4m, use=cons25l1,
2748 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2749 lines#50, use=cons25l1,
2750 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2751 lines#50, use=cons25l1-m,
2752 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2753 lines#60, use=cons25l1,
2754 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2755 lines#60, use=cons25l1-m,
2757 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2758 # which is intended to be xterm-compatible. See for example
2759 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2760 # in particular scterm-teken.c
2762 # For FreeBSD 9 and 10:
2763 # --------------------
2764 # The /etc/ttys entries for console and other ttys are all configured to set
2767 # Testing with tack:
2768 # There is no VT100 line-drawing (uses +'s and -'s)
2769 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2771 # Testing with vttest:
2772 # Menu 2 diamonds don't work, blink ditto, light background ditto
2773 # The terminal identifies itself as VT100 with AVO
2774 # There is no VT52 support
2775 # There is no doublesize character support
2776 # The terminal supports ECH (like rxvt)
2777 # The terminal does not support send/receive mode
2778 # The terminal supports all of the ISO-6429 cursor-movement
2779 # The terminal supports some of the ISO-6429 miscellaneous tests
2780 # (SL/SR also leave unexpected char on screen too)
2782 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2783 # the cells which happen to have ASCII control-character values:
2784 # - ^X arrow pointing up
2785 # . ^Y arrow pointing down
2789 # Those are removed from this entry's acsc string to avoid confusion.
2790 # The resulting description provides correct line-drawing and function-keys -TD
2791 teken|syscons with teken,
2793 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2794 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2795 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2796 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2797 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2798 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2799 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2800 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2801 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2802 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2804 #### 386BSD and BSD/OS Consoles
2807 # This was the original 386BSD console entry (I think).
2808 # Some places it's named oldpc3|oldibmpc3.
2809 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2810 origpc3|origibmpc3|IBM PC 386BSD Console,
2811 OTbs, am, bw, eo, xon,
2813 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2815 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2816 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2817 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2818 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2819 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2820 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2822 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2823 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2826 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2827 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2828 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2829 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2831 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2832 # Note, the emulator supports many of the additional console features
2833 # listed in the iBCS2 (e.g. character-set selection) though not all
2834 # are described here. This entry really ought to be upgraded.
2835 # Also note, the console will also work with fewer lines after doing
2836 # "stty rows NN", e.g. to use 24 lines.
2837 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2838 # Bug: The <op> capability resets attributes.
2839 bsdos-pc|IBM PC BSD/OS Console,
2840 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2841 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2842 use=bsdos-pc-nobold,
2844 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2845 use=klone+color, use=bsdos-pc-m,
2847 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2848 OTbs, am, eo, km, xon,
2849 cols#80, it#8, lines#25,
2850 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2851 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2852 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2853 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2854 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2855 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2856 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2857 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2858 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2861 # Old names for BSD/OS PC console used in releases before 4.1.
2862 pc3|BSD/OS on the PC Console,
2863 use=bsdos-pc-nobold,
2864 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2867 # BSD/OS on the SPARC
2868 bsdos-sparc|Sun SPARC BSD/OS Console,
2871 # BSD/OS on the PowerPC
2872 bsdos-ppc|PowerPC BSD/OS Console,
2877 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2879 # Actually (TD pointed this out at the time the acsc string was added):
2880 # vt52 shouldn't define full acsc since most of the cells don't match.
2881 # see vt100 manual page A-31. This is the list that does match:
2890 # The line-drawing happens to work in several terminal emulators, but should
2891 # not be used as a guide to the capabilities of the vt52. Note in particular
2892 # that vt52 does not support line-drawing characters (the scan-X values refer
2893 # to a crude plotting feature) -TD
2896 cols#80, it#8, lines#24,
2897 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
2898 cub1=\ED, cud1=\EB, cuf1=\EC,
2899 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2900 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2901 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
2903 #### DEC VT100 and compatibles
2905 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2906 # and micro consoles can be found in the `obsolete' section. More details on
2907 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2908 # found near the end of this file.
2910 # Except where noted, these entries are DEC's official terminfos.
2911 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2912 # Engineering for more information. Updated terminfos and termcaps
2913 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2915 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2916 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2917 # its name to Boundless Technologies; see http://www.boundless.com.
2920 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2921 # certainly includes what DEC called the `Level 1 editing extension' codes;
2922 # only the very oldest VT100s lacked these and there probably aren't any of
2923 # those left alive. To capture these, use one of the VT102 entries.
2925 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2926 # since the cursor is left in a different position while in the
2927 # weird state (concept at beginning of next line, vt100 at end
2928 # of this line) so all versions of vi before 3.7 don't handle
2929 # <xenl> right on vt100. The correct way to handle <xenl> is when
2930 # you output the char in column 80, immediately output CR LF
2931 # and then assume you are in column 1 of the next line. If <xenl>
2932 # is on, am should be on too.
2934 # I assume you have smooth scroll off or are at a slow enough baud
2935 # rate that it doesn't matter (1200? or less). Also this assumes
2936 # that you set auto-nl to "on", if you set it off use vt100-nam
2939 # The padding requirements listed here are guesses. It is strongly
2940 # recommended that xon/xoff be enabled, as this is assumed here.
2942 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2943 # tab settings are in non-volatile memory and don't need to be
2944 # reset upon login. Also setting the number of columns glitches
2945 # the screen annoyingly. You can type "reset" to get them set.
2947 # The VT100 series terminals have cursor ("arrows") keys which can operate
2948 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2949 # is the reset state, and is assumed to be the normal state. Application
2950 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2951 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2952 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2953 # was provided primarily as an aid to the porting of VT52 applications. It is
2954 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2955 # applications such as vi will always transmit the <smkx> string. Therefore,
2956 # the definitions for the cursor keys are made to match what the terminal
2957 # transmits after the <smkx> string is transmitted. If the <smkx> string
2958 # is a null string or is not defined, then cursor keys are assumed to be in
2959 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2960 # else the application may fail. It is also expected that applications will
2961 # always transmit the <rmkx> string to the terminal before they exit.
2963 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2964 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2965 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2966 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2967 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2968 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2969 # Enter key transmits the same as the Return key (Note: the Return key
2970 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2971 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2972 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2973 # is normally in Numeric Mode. If an application requires that the keypad be
2974 # in Application Mode then it is expected that the user, or the application,
2975 # will set the TERM environment variable to point to a terminfo entry which has
2976 # defined the <smkx> string to include the codes that switch the keypad into
2977 # Application Mode, and the terminfo entry will also define function key
2978 # fields to match the Application Mode control codes. If the <smkx> string
2979 # is a null string or is not defined, then the keypad is assumed to be in
2980 # Numeric Mode. If the <smkx> string switches the keypad into Application
2981 # Mode, it is expected that the <rmkx> string will contain the control codes
2982 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2983 # applications which transmit the <smkx> string will also always transmit the
2984 # <rmkx> string to the terminal before they exit.
2986 # Here's a diagram of the VT100 keypad keys with their bindings.
2987 # The top line is the name of the key (some DEC keyboards have the keys
2988 # labelled somewhat differently, like GOLD instead of PF1, but this is
2989 # the most "official" name). The second line is the escape sequence it
2990 # generates in Application Keypad mode (where "$" means the ESC
2991 # character). The third line contains two items, first the mapping of
2992 # the key in terminfo, and then in termcap.
2993 # _______________________________________
2994 # | PF1 | PF2 | PF3 | PF4 |
2995 # | $OP | $OQ | $OR | $OS |
2996 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2998 # | $Ow | $Ox | $Oy | $Om |
2999 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
3001 # | $Ot | $Ou | $Ov | $Ol |
3002 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
3004 # | $Oq | $Or | $Os | enter |
3005 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
3008 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
3010 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
3011 # terminfo guidelines. That is a compromise used to assign the remaining
3012 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
3014 vt100+keypad|dec vt100 numeric keypad no fkeys,
3015 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
3016 vt100+pfkeys|dec vt100 numeric keypad,
3017 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3019 vt100+fnkeys|dec vt100 numeric keypad,
3020 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
3021 kf9=\EOw, use=vt100+pfkeys,
3023 # A better adaptation to modern keyboards such as the PC's, which have a dozen
3024 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
3025 # use the 5-key arrangement to model the arrow keys as suggested in the
3026 # terminfo guidelines:
3027 # _______________________________________
3028 # | PF1 | PF2 | PF3 | PF4 |
3029 # | $OP | $OQ | $OR | $OS |
3030 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3032 # | $Ow | $Ox | $Oy | $Om |
3033 # |_ka1__K1_|_________|_ka3__K3_|_________|
3035 # | $Ot | $Ou | $Ov | $Ol |
3036 # |_________|_kb2__K2_|_________|_________|
3038 # | $Oq | $Or | $Os | enter |
3039 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3042 # |___________________|_________|_kent_@8_|
3044 vt220+keypad|dec vt220 numeric keypad,
3045 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3046 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3049 vt100+enq|ncurses extension for vt100-style ENQ,
3050 u8=\E[?1;2c, use=ansi+enq,
3051 vt102+enq|ncurses extension for vt102-style ENQ,
3052 u8=\E[?6c, use=ansi+enq,
3054 # And here, for those of you with orphaned VT100s lacking documentation, is
3055 # a description of the soft switches invoked when you do `Set Up'.
3057 # Scroll 0-Jump Shifted 3 0-#
3058 # | 1-Smooth | 1-British pound sign
3059 # | Autorepeat 0-Off | Wrap Around 0-Off
3061 # | | Screen 0-Dark Bkg | | New Line 0-Off
3062 # | | | 1-Light Bkg | | | 1-On
3063 # | | | Cursor 0-Underline | | | Interlace 0-Off
3064 # | | | | 1-Block | | | | 1-On
3066 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3068 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3069 # | | | 1-On | | | 1-50 Hz
3070 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3071 # | | 1-ANSI | | 1-8 Bits
3072 # | Keyclick 0-Off | Parity 0-Off
3074 # Margin Bell 0-Off Parity Sense 0-Odd
3077 # The following SET-UP modes are assumed for normal operation:
3078 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3079 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3080 # Other SET-UP modes may be set for operator convenience or communication
3081 # requirements; I recommend
3082 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3083 # Unless you have a graphics add-on such as Digital Engineering's VT640
3084 # (and even then, whenever it can be arranged!) you should set
3087 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3088 vt100|vt100-am|dec vt100 (w/advanced video),
3089 OTbs, mc5i, xenl, xon,
3091 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
3092 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3093 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
3094 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
3096 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3097 %;m%?%p9%t\016%e\017%;$<2>,
3098 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
3099 use=vt100+4bsd, use=vt100+fnkeys,
3100 vt100+4bsd|dec vt100 from 4.0BSD,
3102 cols#80, it#8, lines#24,
3103 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3104 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3105 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
3106 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3107 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3108 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3109 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
3110 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3111 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
3112 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3113 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3114 %;m%?%p9%t\016%e\017%;$<2>,
3115 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
3116 smul=\E[4m$<2>, tbc=\E[3g,
3117 vt100nam|vt100-nam|vt100 no automargins,
3119 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3120 vt100-vb|dec vt100 (w/advanced video) & no beep,
3121 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3123 # Ordinary vt100 in 132 column ("wide") mode.
3124 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3126 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3127 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3128 cols#132, lines#14, vt@,
3129 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3131 # vt100 with no advanced video.
3132 vt100-nav|vt100 without advanced video option,
3134 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3136 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3137 cols#132, lines#14, use=vt100-nav,
3139 # vt100 with one of the 24 lines used as a status line.
3140 # We put the status line on the top.
3141 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3144 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3145 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3146 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3147 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3149 # Status line at bottom.
3150 # Clearing the screen will clobber status line.
3151 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3154 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3155 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3157 # Most of the `vt100' emulators out there actually emulate a vt102
3158 # This entry (or vt102-nsgr) is probably the right thing to use for
3161 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3163 vt102-w|dec vt102 in wide mode,
3165 rs3=\E[?3h, use=vt102,
3167 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3168 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3169 # string in the canonical vt100 entry above leaves the screen littered
3170 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3171 # after highlight turnoffs. This entry should fix that, and even leave
3172 # ACS support working, at the cost of making multiple-highlight changes
3173 # slightly more expensive.
3174 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3175 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3176 sgr@, sgr0=\E[m, use=vt102,
3178 # VT125 Graphics CRT. Clear screen also erases graphics
3179 # Some vt125's came configured with vt102 support.
3180 vt125|vt125 graphics terminal,
3182 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3184 # This isn't a DEC entry, it came from University of Wisconsin.
3185 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3188 cols#80, it#8, lines#24, vt#3,
3189 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3190 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3191 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
3192 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3193 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3194 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3195 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3196 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3197 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3199 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3200 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3201 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3203 # vt132 - like vt100 but slower and has ins/del line and such.
3204 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3205 # manual and from the ANSI standard, this describes the actual
3206 # terminal. I've never actually used a vt132 myself, so this
3211 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3212 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3214 # This vt220 description maps F5--F9 to the second block of function keys
3215 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3216 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3217 # PF1--PF4 are used as F1--F4.
3220 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3221 OTbs, OTpt, am, mir, msgr, xenl, xon,
3222 cols#80, lines#24, vt#3,
3224 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3225 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3226 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3227 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3228 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3229 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3230 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3231 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3232 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3233 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3234 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3235 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3236 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3237 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3238 rmso=\E[27m, rmul=\E[24m,
3239 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3240 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3241 %p9%t\E(0%e\E(B%;$<2>,
3242 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3243 smso=\E[7m, smul=\E[4m,
3245 # A much better description of the VT200/220; used to be vt220-8
3246 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3247 # designation to accommodate bug in pcvt -TD
3249 # Here's a picture of the VT220 editing keypad:
3250 # +--------+--------+--------+
3251 # | Find | Insert | Remove |
3252 # +--------+--------+--------+
3253 # | Select | Prev | Next |
3254 # +--------+--------+--------+
3255 vt220|vt200|dec vt220,
3256 OTbs, am, mir, msgr, xenl, xon,
3257 cols#80, it#8, lines#24, vt#3,
3258 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3259 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3260 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3261 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3262 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3263 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3264 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3265 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3266 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3267 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3268 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3269 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3270 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3271 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3272 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3273 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3274 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3275 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3276 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3277 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3279 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3280 %p9%t\E(0%e\E(B%;$<2>,
3281 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3282 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3284 vt220-w|vt200-w|DEC vt220 in wide mode,
3286 rs3=\E[?3h, use=vt220,
3287 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3288 OTbs, am, mc5i, mir, msgr, xenl, xon,
3289 cols#80, it#8, lines#24, vt#3,
3290 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3291 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
3292 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3293 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
3294 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3295 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3296 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3297 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3298 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3299 il=\233%p1%dL, il1=\233L, ind=\ED,
3300 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3301 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3302 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3303 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3304 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3305 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3306 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3307 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3308 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3309 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3310 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3311 rmul=\23324m, rs1=\233?3l, sc=\E7,
3312 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3313 %?%p9%t\E(0%e\E(B%;$<2>,
3314 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3315 smso=\2337m, smul=\2334m, tbc=\2333g,
3318 # This vt220 description regards F6--F10 as the second block of function keys
3319 # at the top of the keyboard. This mapping follows the description given
3320 # in the VT220 Programmer Reference Manual and agrees with the labeling
3321 # on some terminals that emulate the vt220. There is no support for an F5.
3322 # See vt220 for an alternate mapping.
3324 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3325 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3326 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3327 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3328 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3330 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3332 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3334 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3335 # (not an official DEC entry!)
3336 # The problem with real vt220 terminals is they don't send escapes when in
3337 # in vt220 mode. This can be gotten around two ways. 1> don't send
3338 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3339 # features of vt100 advanced video which it then has.
3341 # This entry takes the view of putting a vt220 into vt100 mode so
3342 # you can use the escape key in emacs and everything else which needs it.
3344 # You probably don't want to use this on a VMS machine since VMS will think
3345 # it has a vt220 and will get fouled up coming out of emacs
3347 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3348 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3350 vt200-js|vt220-js|dec vt200 series with jump scroll,
3353 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3354 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3355 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3356 ht=^I, il1=\E[L, ind=\ED,
3357 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3359 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3360 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
3361 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3362 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3363 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3364 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3366 # This was DEC's vt320. Use the purpose-built one below instead
3367 #vt320|DEC VT320 in vt100 emulation mode,
3370 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3372 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3374 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3376 # These entries are not DEC's official ones, they were purpose-built for the
3377 # VT320. Here are the designer's notes:
3378 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3379 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3380 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3381 # Things that use <knxt> usually use tab anyways... and things that don't use
3382 # tab usually use <knxt> instead...
3383 # kprv is same as tab - Backtab is useless...
3384 # I left out <sgr> because of its RIDICULOUS complexity,
3385 # and the resulting fact that it causes the termcap translation of the entry
3386 # to SMASH the 1k-barrier...
3387 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3388 # (vt320: uncommented <fsl> --esr)
3389 vt320|vt300|dec vt320 7 bit terminal,
3390 am, hs, mir, msgr, xenl,
3391 cols#80, lines#24, wsl#80,
3392 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3393 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3394 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
3395 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3396 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3397 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3398 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3399 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3400 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3401 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3402 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3403 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3404 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3405 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3406 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3407 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3408 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3409 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3410 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3412 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3414 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3415 %p9%t\E(0%e\E(B%;$<2>,
3416 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3417 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3418 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3419 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3421 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3422 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3423 # We have to init 132-col mode, not 80-col mode.
3424 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3426 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3427 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3428 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3430 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3431 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3433 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3434 # which are pretty much a superset of the VT320. They have the
3435 # host writable status line, yet another different DRCS matrix size,
3436 # and such, but they add the DEC Technical character set, Multiple text
3437 # pages, selectable length pages, and the like. The difference between
3438 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3439 # monitor, the former has 4 planes and a color monitor. These terminals
3440 # support VT131 and ANSI block mode, but as with much of these things,
3441 # termcap/terminfo doesn't deal with these features.
3443 # Note that this entry is are set up in what was the standard way for GNU
3444 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3445 # keys were switched into application mode at the same time the numeric pad
3446 # is switched into application mode. This changes the definitions of the
3447 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3448 # your termcap or terminfo entry,
3450 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3451 # (vt340: string capability "sb=\E[M" corrected to "sr";
3452 # also, added <rmam>/<smam> based on the init string -- esr)
3453 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3454 am, eslok, hs, mir, msgr, xenl, xon,
3455 cols#80, it#8, lines#24, vt#3,
3456 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3457 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3458 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3459 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
3460 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3461 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3462 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3463 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3464 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3466 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3468 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3469 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3470 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3471 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3472 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3473 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3474 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3475 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3476 %p9%t\E(0%e\E(B%;$<2>,
3477 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3478 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3479 tsl=\E[2$~\E[1$}\E[1;%dH,
3481 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3482 # (originally written with vt420 as its primary name, and usable for it).
3484 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3485 # text pages and long text pages with selectable length of the vt340, along
3486 # with left and right margins, rectangular area text copy, fill, and erase
3487 # operations, selected region character attribute change operations,
3488 # page memory and rectangle checksums, insert/delete column, reception
3489 # macros, and other features too numerous to remember right now. TERMCAP
3490 # can only take advantage of a few of these added features.
3492 # Note that this entry is are set up in what was the standard way for GNU
3493 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3494 # keys were switched into application mode at the same time the numeric pad
3495 # is switched into application mode. This changes the definitions of the
3496 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3497 # your termcap entry,
3499 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3500 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3501 # also, added <rmam>/<smam> based on the init string -- esr)
3502 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3503 am, eslok, hs, mir, msgr, xenl, xon,
3504 cols#80, it#8, lines#24, vt#3,
3505 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3506 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3507 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
3508 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3509 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3510 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3511 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3512 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3513 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3514 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3515 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3516 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3518 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3519 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3520 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3521 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3522 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3523 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3524 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3525 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3526 %p9%t\E(0%e\E(B%;$<2>,
3527 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3528 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3529 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3531 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3532 # a missing <sc> -- esr)
3533 # add msgr and other capabilities from vt220 -TD
3535 am, mir, msgr, xenl, xon,
3536 cols#80, it#8, lines#24, vt#3,
3537 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3538 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3539 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3540 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3541 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3542 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3543 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3544 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3545 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3546 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3547 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3548 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3549 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3550 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3551 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3552 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3553 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3554 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3555 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3556 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3557 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3558 %p9%t\E(0%e\E(B%;$<2>,
3559 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3560 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3561 use=ansi+pp, use=dec+sl, use=ansi+enq,
3563 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3564 # takes two parameters, the key and the string. Translating the key is
3565 # straightforward (keys 1-5 are not defined on real terminals, though some
3566 # emulators define these):
3568 # if (key < 16) then value = key;
3569 # else if (key < 21) then value = key + 1;
3570 # else if (key < 25) then value = key + 2;
3571 # else if (key < 27) then value = key + 3;
3572 # else if (key < 30) then value = key + 4;
3573 # else value = key + 5;
3575 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3576 # There's no provision in terminfo for emitting a string in this format, so the
3577 # application has to know it.
3579 vt420pc|DEC VT420 w/PC keyboard,
3580 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3581 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3582 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3583 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3584 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3585 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3586 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3587 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3588 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3589 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3590 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3591 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3592 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3593 pctrm=USR_TERM\:vt420pcdos\:,
3594 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3595 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3599 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3601 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3602 %{127}%=%t\E\177%e%p1%c%;,
3604 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3605 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3607 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3608 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3609 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3610 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3611 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3612 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3613 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3618 vt510pc|DEC VT510 w/PC keyboard,
3620 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3625 # The VT520 is a monochrome text terminal capable of managing up to
3626 # four independent sessions in the terminal. It has multiple ANSI
3627 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3628 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3629 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3631 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3632 # [Alt]/[Print Screen] depending upon which keyboard and which
3633 # terminal mode is being used. If Set-Up has been disabled or
3634 # assigned to an unknown key, Set-Up may be entered by pressing
3635 # [F3] as the first key after power up, regardless of keyboard type.
3637 use=ansi+rca, use=vt420, use=ansi+tabs,
3642 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3643 # Keyboard, which replaces the old LK41R-AA keyboard.
3645 # In trying to get the function keys to work, I had to cobble my own
3646 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3647 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3648 # I seem to get them all -Mike Gran
3649 vt520ansi|Boundless VT520 ANSI,
3650 use=ansi+rca, use=vt420f, use=vt220+keypad,
3653 #### VT100 emulations
3656 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3657 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3658 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3659 # that this works best with a stock vt100 entry.
3660 dec-vt100|EWAN telnet's vt100 emulation,
3663 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3664 dec-vt220|DOS tnvt200 terminal emulator,
3667 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3668 # anyone who needs PC VT340 emulation. (or anything below that level, for
3669 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3670 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3671 # I can send the address if requested.
3672 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3673 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3674 z340|zstem vt340 terminal emulator 132col 42line,
3676 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3677 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3678 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3680 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3681 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3683 # CRT is shareware. It implements some xterm features, including mouse.
3684 crt|crt-vt220|CRT 2.3 emulating VT220,
3687 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3689 # PuTTY 0.55 (released 3 August 2004)
3690 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3692 # Comparing with 0.51, vttest is much better (only a few problems with the
3693 # cursor position reports and wrapping).
3695 # PuTTY 0.51 (released 14 December 2000)
3697 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3698 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3699 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3700 # to xterm, which is incorrect, since several features are misimplemented:
3702 # Alt+key always sends ESC+key, so 'km' capability is removed.
3704 # Control responses, wrapping and tabs are buggy, failing a couple of
3705 # screens in vttest.
3707 # xterm mouse support is not implemented (unrelease version may).
3709 # Several features such as backspace/delete are optional; this entry documents
3710 # the default behavior -TD
3712 putty|PuTTY terminal emulator,
3713 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3714 colors#8, it#8, ncv#22, pairs#64, U8#1,
3715 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3716 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3717 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3718 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3719 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3720 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3721 dch=\E[%p1%dP, dch1=\E[P,
3722 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3723 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3724 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3725 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3726 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3727 %%G\340\202\242\E%%@%e%p1%c%;,
3728 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3729 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3730 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3731 il1=\E[L, ind=\n, indn=\E[%p1%dS,
3732 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3733 %02x%p4%{255}%*%{1000}%/%02x,
3734 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3735 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3736 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3737 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3738 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3739 kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3740 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3741 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3742 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3743 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3744 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3745 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3746 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3747 %;m%?%p9%t\016%e\017%;,
3748 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3749 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3750 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3751 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3752 vt100-putty|Reset PuTTY to pure vt100,
3753 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3755 putty-256color|PuTTY 0.58 with xterm 256-colors,
3756 use=xterm+256setaf, use=putty,
3757 putty-noapp|putty with cursor keys in normal mode,
3758 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3759 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3762 # One of the keyboard selections is "VT100+".
3763 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3764 putty-vt100|VT100+ keyboard layout,
3765 use=putty+fnkeys+vt100, use=putty,
3767 putty-sco|putty with SCO function keys,
3768 use=putty+fnkeys+sco, use=putty,
3770 # PuTTY has more than one section in its Keyboard configuration:
3771 # a) backspace/delete, which we ignore since that choice largely depends on
3772 # whether one matches Unix and BSD or Linux.
3773 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3774 # are unrelated to rxvt's actual settings.
3775 # c) function keys and keypad - this is the interesting part. None of the
3776 # selections match any of their respective namesakes, but they are shown
3777 # here to help users who expect that the selections do what is implied.
3779 # This is the default setting for PuTTY
3780 putty+fnkeys|fn-keys for PuTTY,
3781 use=putty+fnkeys+esc,
3783 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3784 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3785 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3786 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3787 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3788 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3790 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3791 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3792 use=putty+fnkeys+esc,
3794 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3795 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3796 use=putty+fnkeys+esc,
3798 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3799 use=putty+fnkeys+esc,
3801 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3803 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3804 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3805 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3806 kf9=\EOX, use=putty+fnkeys+esc,
3808 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3810 # Use modifiers to obtain function keys past 12:
3813 # F25-F36 - control/alt
3814 # F37-F48 - control/shift
3816 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3817 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3818 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3819 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3820 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3821 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3822 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3823 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3824 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3825 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3826 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3827 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3828 kich1=\E[L, knp=\E[G, kpp=\E[I,
3830 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3831 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3832 # (communication program) which supports:
3834 # - Serial port connections.
3835 # - TCP/IP (telnet) connections.
3836 # - VT100 emulation, and selected VT200/300 emulation.
3837 # - TEK4010 emulation.
3838 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3840 # - Scripts using the "Tera Term Language".
3841 # - Japanese and Russian character sets.
3843 # The program does not come with terminfo or termcap entries. However, the
3844 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3845 # vt52 or doublesize character support; blinking is done with color). Besides
3846 # the HPA, VPA extensions it also implements CPL and CNL.
3848 # All of the function keys can be remapped. This description shows the default
3849 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3850 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3851 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3859 # ANSI colors are implemented, but cannot be combined with video attributes
3860 # except for reverse.
3862 # No fonts are supplied with the program, so the acsc string is chosen to
3863 # correspond with the default Microsoft terminal font.
3865 # Tera Term recognizes some xterm sequences, including those for setting and
3866 # retrieving the window title, and for setting the window size (i.e., using
3867 # "resize -s"), though it does not pass SIGWINCH to the application if the
3868 # user resizes the window with the mouse.
3869 teraterm2.3|Tera Term Pro,
3872 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3873 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3874 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3875 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3876 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3877 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3878 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3879 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3880 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3881 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3882 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3883 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3884 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3885 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3886 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3887 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3888 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3889 use=klone+color, use=vt100,
3891 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3892 # to choose a Windows OEM font).
3894 # Testing with tack:
3895 # - it does not have xenl (suppress that)
3896 # - underline seems to work with color (modify ncv).
3897 # Testing with vttest:
3898 # - wrapping differs from vt100 (menu 1).
3899 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3901 # - it recognizes the dtterm window controls for reporting size in
3902 # characters and pixels.
3903 # - it passes SIGWINCH.
3904 teraterm4.59|Tera Term Pro,
3907 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3908 kmous=\E[M, use=teraterm2.3,
3913 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3914 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3917 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3918 # for casual (occasional) use. Also fails several of the vttest screens,
3919 # but that is not unusual for vt100 "emulators".
3920 # b) Does not implement vt100 keypad
3921 # c) Recognizes a subset of vt52 controls.
3922 ms-vt100|MS telnet imitating dec vt100,
3924 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3925 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3926 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3927 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3928 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3930 # Tested with Windows 2000, the telnet application runs in a console window,
3931 # also using 'Terminal' font.
3934 # a) This version has no function keys or numeric keypad. Unlike the older
3935 # version, the numeric keypad is entirely ignored.
3936 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3937 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3939 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3942 # Based on comments from Federico Bianchi:
3944 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3945 # scheme for PF keys.
3947 # and PuTTY wishlist:
3949 # The modifiers are represented as the codes listed above, prefixed to
3950 # the normal sequences. If the modifier is pressed alone, its sequence
3951 # is transmitted twice in succession. If multiple modifiers apply,
3952 # they're transmitted in the order shift, control, alt.
3957 ms-vt100+|vt100+|windows XP vt100+ (sic),
3958 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3959 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3960 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3961 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3962 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3963 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3964 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3965 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3966 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3967 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3968 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3969 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3970 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3971 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3972 knp=\E/, kpp=\E?, use=ms-vt100-color,
3974 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3977 # expect-5.44.1.15/example/tkterm
3978 # a minimal subset of a vt100 (compare with "news-unk).
3980 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3981 tt|tkterm|Don Libes' tk text widget terminal emulator,
3982 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3983 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3984 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3985 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3988 ######## X TERMINAL EMULATORS
3991 # You can add the following line to your .Xdefaults to change the terminal type
3992 # set by the xterms you start up to my-xterm:
3994 # *termName: my-xterm
3996 # System administrators can change the default entry for xterm instances
3997 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3998 # case, xterm will detect and reject an invalid terminal type, falling back
3999 # to the default of xterm.
4002 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4003 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4004 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4005 # as these seem not to work -- esr)
4006 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4007 OTbs, am, km, mir, msgr, xenl, xon,
4008 cols#80, it#8, lines#65,
4009 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4010 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4011 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4012 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4013 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4014 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4015 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4016 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4017 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4018 smso=\E[7m, smul=\E[4m,
4019 # Compatible with the R5 xterm
4020 # (from the XFree86 3.2 distribution, <blink=@> removed)
4021 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4022 # corrected typos in rs2 string - TD
4024 xterm-r5|xterm R5 version,
4025 OTbs, am, km, msgr, xenl,
4026 cols#80, it#8, lines#24,
4027 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4028 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4029 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4030 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4031 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4032 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4033 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
4034 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
4035 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
4036 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4037 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4038 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
4039 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
4040 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
4042 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4044 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4046 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4047 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4048 # Compatible with the R6 xterm
4049 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4050 # added khome/kend, hts based on the R6 xterm code - TD
4051 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4052 # for compatibility with other emulators).
4053 xterm-r6|xterm X11R6 version,
4054 OTbs, am, km, mir, msgr, xenl,
4055 cols#80, it#8, lines#24,
4056 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4057 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4058 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4059 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4060 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4061 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4062 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4064 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
4065 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4066 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4067 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4068 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4069 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4070 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4071 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4072 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4073 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4074 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4075 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4076 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4077 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4079 xterm-old|antique xterm version,
4081 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4082 # The name has been changed and some aliases have been removed.
4083 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4084 OTbs, am, bce, km, mir, msgr, xenl, XT,
4085 cols#80, it#8, lines#24, ncv@,
4086 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4087 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4088 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4089 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4090 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4091 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4092 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4093 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4094 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4095 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4097 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4098 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4099 kcuu1=\EOA, kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
4100 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4101 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
4102 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
4103 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4104 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
4105 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
4106 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
4107 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
4108 rmso=\E[27m, rmul=\E[24m, rs1=^O,
4109 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
4110 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4112 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4114 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4115 %;m%?%p9%t\016%e\017%;,
4116 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4117 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4118 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
4119 use=ecma+color, use=vt220+keypad,
4121 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4122 # codes for F1-F4 except while in VT220 mode.
4123 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4124 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4126 # This version was released in XFree86 3.3.3 (November 1998).
4127 # Besides providing printer support, it exploits a new feature that allows
4128 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4129 # -- the distribution contained incorrect khome/kend values -TD
4130 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4131 blink=\E[5m, ich1@, invis=\E[8m,
4132 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4133 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4134 rs2=\E[!p\E[?3;4l\E[4l\E>,
4135 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4136 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4137 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4140 # This version was released in XFree86 4.0.
4141 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4143 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4144 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4145 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4146 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4147 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4148 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4149 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4150 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4151 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4152 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4153 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4154 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4155 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4156 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4157 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4159 smcup=\E[?1049h, use=xterm-xf86-v333,
4161 # This version was released in XFree86 4.3.
4162 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4163 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4164 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4166 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4167 %p7%t;8%;m%?%p9%t\016%e\017%;,
4170 # This version was released in XFree86 4.4.
4171 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4172 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4173 rin=\E[%p1%dT, use=xterm-xf86-v43,
4175 xterm-xfree86|xterm terminal emulator (XFree86),
4178 # This version reflects the current xterm features.
4179 xterm-new|modern xterm terminal emulator,
4181 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4182 rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,
4183 use=xterm+tmux, use=ecma+strikeout, use=xterm-basic,
4185 # This fragment is for people who cannot agree on what the backspace key
4187 xterm+kbs|fragment for backspace key,
4190 # This fragment describes as much of XFree86 xterm's "pc-style" function
4191 # keys as will fit into terminfo's 60 function keys.
4194 # ---------------------------------
4201 # 8 Shift + Alt + Control
4202 # ---------------------------------
4203 # The meta key may also be used as a modifier in this scheme, adding another
4204 # bit to the parameter.
4205 xterm+pcfkeys|fragment for PC-style fkeys,
4206 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4209 xterm+noapp|fragment with cursor keys in normal mode,
4210 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4213 xterm+app|fragment with cursor keys in application mode,
4214 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4217 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4218 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4219 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4221 # The original assignments from patch #94 for cursor-keys had some technical
4224 # A parameter for a function-key to represent a modifier is just more
4225 # bits. But for a cursor-key it may change the behavior of the
4226 # application. For instance, emacs decodes the first parameter of a
4227 # cursor-key as a repeat count.
4229 # A parameterized string should (really) not begin with SS3 (\EO).
4230 # Rather, CSI (\E[) should be used.
4232 # For these reasons, the original assignments were deprecated. For
4233 # compatibility reasons, they are still available as a setting of xterm's
4234 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4235 # that might apply to xterm+pcfkeys with different values of that resource.
4236 xterm+pcc3|fragment with modifyCursorKeys:3,
4237 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4238 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4239 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4240 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4241 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4242 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4243 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4244 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4247 xterm+pcc2|fragment with modifyCursorKeys:2,
4248 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4249 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4250 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4251 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4252 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4253 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4254 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4256 xterm+pcc1|fragment with modifyCursorKeys:1,
4257 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4258 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4259 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4260 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4261 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4262 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4264 xterm+pcc0|fragment with modifyCursorKeys:0,
4265 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4266 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4267 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4268 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4269 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4270 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4273 # Here are corresponding fragments from xterm patch #216:
4275 xterm+pcf0|fragment with modifyFunctionKeys:0,
4276 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4277 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4278 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4279 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4280 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4281 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4282 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4283 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4284 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4285 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4286 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4287 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4288 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4289 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4290 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4291 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4292 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4294 xterm+pcf2|fragment with modifyFunctionKeys:2,
4295 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4296 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4297 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4298 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4299 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4300 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4301 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4302 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4303 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4304 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4305 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4306 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4307 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4308 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4309 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4310 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4311 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4312 kf8=\E[19~, kf9=\E[20~,
4314 # Chunks from xterm #230:
4315 xterm+pce2|fragment with modifyCursorKeys:2,
4316 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4317 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4318 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4319 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4320 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4321 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4322 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4323 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4324 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4325 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4326 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4329 xterm+edit|fragment for 6-key editing-keypad,
4330 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4333 xterm+pc+edit|fragment for pc-style editing keypad,
4334 kend=\E[4~, khome=\E[1~,
4336 xterm+vt+edit|fragment for vt220-style editing keypad,
4337 kfnd=\E[1~, kslt=\E[4~,
4340 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4341 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4342 # is shown here (because that is used in mrxvt and mlterm):
4343 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4344 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4345 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4346 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4347 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4348 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4349 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4350 kf63=\E[13;4~, use=xterm+pcf2,
4352 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4353 xterm-basic|modern xterm terminal emulator - common,
4354 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4355 colors#8, cols#80, it#8, lines#24, pairs#64,
4356 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4357 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4358 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4359 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4360 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4361 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4362 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4363 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4364 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4365 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4366 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4367 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4368 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4369 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4370 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4371 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4372 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4373 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4375 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4377 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4378 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4379 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4380 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4381 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4382 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
4385 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4386 # In retrospect, something like xterm-r6 was intended here -TD
4387 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4388 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4390 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4393 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4394 # xterm also recognizes the control sequences for initc -TD
4395 xterm-16color|xterm with 16 colors like aixterm,
4397 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4398 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4399 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4402 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4403 # xterm patch #111 (1999/7/10) -TD
4404 xterm+256color|xterm 256-color feature,
4406 colors#256, pairs#32767,
4407 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4408 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4410 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4412 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4416 # palette is hardcoded...
4417 xterm+256setaf|xterm 256-color (set-only),
4419 colors#256, pairs#32767,
4421 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4423 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4427 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4428 # xterm patch #115 (1999/9/18) -TD
4430 # Note that the escape sequences used are the same as for 256-colors - xterm
4431 # has a different table of default color resource values. If built for
4432 # 256-colors, it can still handle an 88-color palette by using the initc
4435 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4436 # which support the xterm+256color feature support the associated initc
4437 # capability. So it is cancelled in the entries which use this and/or the
4438 # xterm+256color block.
4440 # The default color palette for the 256- and 88-colors are different. A
4441 # given executable will have one palette (perhaps compiled-in). If the program
4442 # supports xterm's control sequence, it can be programmed using initc.
4443 xterm+88color|xterm 88-color feature,
4444 colors#88, pairs#7744, use=xterm+256color,
4446 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4447 xterm-256color|xterm with 256 colors,
4448 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4449 xterm-88color|xterm with 88 colors,
4450 rs1=\Ec\E]104\007, use=xterm+88color,
4453 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4454 # asked for some of xterm's advanced features to be added to its terminfo
4455 # entry. It defines extended capabilities not found in standard terminfo or
4456 # termcap. These are useful in tmux, for instance, hence the name.
4458 # One caveat in adding extended capabilities in ncurses is that if the names
4459 # are longer than two characters, then they will not be visible through the
4460 # termcap interface.
4462 # Ms modifies the selection/clipboard. Its parameters are
4463 # p1 = the storage unit (clipboard, selection or cut buffer)
4464 # p2 = the base64-encoded clipboard content.
4466 # Ss is used to set the cursor style as described by the DECSCUSR
4467 # function to a block or underline.
4468 # Se resets the cursor style to the terminal power-on default.
4470 # Cs and Cr set and reset the cursor colour.
4471 xterm+tmux|advanced xterm features used in tmux,
4472 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4473 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4475 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4476 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4477 # To use it, your decTerminalID resource must be set to 200 or above.
4484 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4485 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4486 colors#8, cols#80, it#8, lines#24, pairs#64,
4487 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4488 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4489 civis=\233?25l, clear=\233H\2332J,
4490 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4491 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4492 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4493 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4494 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4495 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4496 flash=\233?5h$<100/>\233?5l, home=\233H,
4497 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4498 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4499 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4501 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4502 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4503 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4504 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4505 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4506 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4507 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4508 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4509 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4510 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4511 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4512 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4513 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4515 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4517 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4518 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4519 %{6}%=%t3%e%p1%d%;m,
4520 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4521 %{6}%=%t3%e%p1%d%;m,
4522 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4523 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4524 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4525 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4526 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4527 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4530 xterm-hp|xterm with hpterm function keys,
4531 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4532 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4533 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4534 knp=\ES, kpp=\ET, use=xterm-basic,
4536 xterm-sco|xterm with SCO function keys,
4537 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4538 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4539 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4540 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4541 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4542 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4543 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4544 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4545 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4546 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4547 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4548 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4551 # The xterm-new description has all of the features, but is not completely
4552 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4553 # sunKeyboard resource to true:
4554 # + maps the editing keypad
4555 # + interprets control-function-key as a second array of keys, so a
4556 # 12-fkey keyboard can support vt220's 20-fkeys.
4557 # + maps numeric keypad "+" to ",".
4558 # + uses DEC-style control sequences for the application keypad.
4560 xterm-vt220|xterm emulating vt220,
4561 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4562 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4563 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4564 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4565 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4566 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4567 use=xterm+app, use=xterm+edit, use=xterm-basic,
4570 xterm-vt52|xterm emulating dec vt52,
4571 cols#80, it#8, lines#24,
4572 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4573 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
4574 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4575 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4576 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
4579 xterm-noapp|xterm with cursor keys in normal mode,
4580 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4583 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4584 lines#24, use=xterm-old,
4586 # This is xterm for ncurses.
4587 xterm|xterm terminal emulator (X Window System),
4590 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4591 # setting the vt100Graphics resource to false.
4592 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4595 # These building-blocks allow access to the X titlebar and icon name as a
4596 # status line. There are a few problems in using them in entries:
4598 # a) tsl should have a parameter to denote the column on which to transfer to
4600 # b) the "0" code for xterm updates both icon-title and window title. Some
4601 # window managers such as twm (and possibly window managers descended from
4602 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4603 # don't want to mess with icon-name when using those window managers.
4605 # The extension "TS" is preferable, because it does not accept a parameter.
4606 # However, if you are using a non-extended terminfo, "TS" is not visible.
4607 xterm+sl|access X title line and icon name,
4609 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4610 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4612 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4614 # In contrast, this block can be used for a DEC vt320 and up. There are two
4617 # DECSASD (select active status display)
4618 # \E[0$} Main display
4619 # \E[1$} Status line
4621 # DECSSDT (select status line type)
4622 # \E[0$~ No status line
4623 # \E[1$~ Indicator status line
4624 # \E[2$~ Host-writable status line
4626 # The building block assumes that the terminal always shows something at the
4627 # status line (either the indicator, or status line). That is because if no
4628 # status line is used, then the terminal makes that line part of the user
4629 # window, changing its size without notice.
4631 # Because there is no "esl" (enable status line) capability, the "tsl"
4632 # capability ensures that the status line is host-writable. A DEC terminal
4633 # will clear the status line when changing from indicator to host-writable
4636 # Once on the status line, the row part of cursor addressing is ignored. Since
4637 # tsl expects a parameter (to specify the column), the shortest addressing that
4638 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4640 dec+sl|DEC VTxx status line,
4642 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4645 # The following xterm variants don't depend on your base version
4647 # xterm with bold instead of underline
4648 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4649 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4651 smso=\E[7m, smul=\E[1m, use=xterm-old,
4653 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4654 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4655 ich@, ich1@, use=xterm,
4656 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4657 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4658 rmcup@, smcup@, use=xterm,
4661 # The xterm mouse protocol is used by other terminal emulators.
4662 # In this section, two extended capabilities are used to illustrate the mouse
4663 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4664 # enabling/disabling other mouse protocols. The "xm" capability describes the
4665 # mouse response; currently there is no interpreter which would use this
4666 # information to make the mouse support completely data-driven.
4668 # Here is the "original" xterm mouse protocol.
4670 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4671 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4672 # sequence", referring to the fact that it does not correspond to a "real"
4673 # terminal. The mouse responses for the X10 protocol are sent only for
4675 xterm+x10mouse|X10 xterm mouse protocol,
4676 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4677 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4678 xterm-x10mouse|X10 xterm mouse,
4679 use=xterm+x10mouse, use=xterm,
4681 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4684 # The mouse responses for the X11 protocol covered button releases, as well as
4687 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4690 # The modifiers are not reflected in this description because as used in xterm
4691 # they are normally inaccessible because the translations resources assign
4692 # shift and control to other features. However, they are important because
4693 # they take up space in the first byte of the response. The other bits of this
4694 # byte are used to encode the button number for both presses and releases.
4695 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4696 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4697 # provide additional features, e.g., wheel mouse.
4699 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4700 # "t" or "T", which was activated by double-clicking. The "t" response was
4701 # used when the starting/ending positions were the same.
4703 # X11R3 (February 1988) added the highlight/tracking mode.
4705 # X11R4 (December 1989) added the control sequences document, listing the
4706 # control sequences for the X10/X11 protocols without descriptions. It also
4707 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4708 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4710 # X11R5 (November 1993) gave a description of the mouse protocol.
4712 # X11R6 (January 1995) moved the control sequences document out of the xterm
4713 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4714 # no new information.
4715 xterm+x11mouse|X11 xterm mouse protocol,
4716 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4717 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4718 xterm-x11mouse|X11 mouse,
4719 use=xterm+x11mouse, use=xterm,
4721 # Here is a suggested description of the xterm highlighting protocol.
4722 # A more complicated example could be constructed to account for the "t"
4724 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4725 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4726 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4728 xterm-x11hilite|X11 mouse with highlight,
4729 use=xterm+x11mouse, use=xterm,
4731 # The preceding were the sources from X Consortium. Other sources (or patches)
4732 # were available. Starting in mid-1995, XFree86 developers collected some of
4733 # those changes and began improvements, e.g., to support color. This was, by
4734 # the way, around the same time that rxvt developers began implementing color,
4735 # though dates (and attributions) are not well documented. I became interested
4736 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4737 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4739 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4740 # "any-event" mouse mode.
4741 xterm+sm+1002|xterm any-event mouse,
4742 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4743 xterm-1002|xterm any-event mouse,
4744 use=xterm+sm+1002, use=xterm,
4746 xterm+sm+1003|testing xterm-mouse,
4747 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
4749 xterm-1003|testing xterm-mouse,
4750 use=xterm+sm+1003, use=xterm,
4752 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
4755 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
4756 # dropping support for the X11 mouse protocol's shift-modifier and using
4757 # available bits in the first byte of the response to encode buttons 4 and 5.
4758 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
4759 # older configurations which might have used the obsolete modifiers.
4761 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
4762 # where the coordinates in the mouse response would be encoded in UTF-8,
4763 # thereby extending the range of coordinates past 222=(255-33). This is the
4764 # "1005" mouse mode.
4765 xterm+sm+1005|xterm UTF-8 mouse,
4766 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
4767 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
4768 xterm-1005|xterm UTF-8 mouse,
4769 use=xterm+sm+1005, use=xterm,
4771 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
4772 # SGR-style parameters.
4774 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
4775 # (By the way, this is a problem with the X11 protocol). A more plausible
4776 # criticism is that the responses provided by the 1005 mode are not distinct
4777 # from the non-1005 responses.
4779 # As an alternative (and fixing the longstanding limitation of X11 mouse
4780 # protocol regarding button-releases), I provided this:
4781 xterm+sm+1006|xterm SGR-mouse,
4782 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
4783 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
4784 xterm-1006|xterm SGR-mouse,
4785 use=xterm+sm+1006, use=xterm,
4788 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4789 # (kterm should not invoke DEC Graphics as the alternate character set
4790 # -- Kenji Rikitake)
4791 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4792 # -- MATSUMOTO Shoji)
4793 # kterm implements acsc via built-in table of X Drawable's
4794 kterm|kterm kanji terminal emulator (X window system),
4797 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4798 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4799 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4800 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
4802 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4803 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4804 kterm-color|kterm-co|kterm with ANSI colors,
4805 ncv@, use=kterm, use=ecma+color,
4808 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4809 # variant of xterm which is apparently no longer supported, but are interesting
4810 # because they illustrate SVr4 curses mouse controls - T.Dickey
4811 xtermm|xterm terminal emulator (monocrome),
4812 OTbs, am, km, mir, msgr, xenl,
4813 btns#3, cols#80, it#8, lines#24,
4814 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4815 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4816 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4817 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4818 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4819 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4820 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4821 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4822 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
4823 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4824 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4825 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4826 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4827 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4828 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4829 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4830 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4831 %;m%?%p9%t\016%e\017%;,
4832 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4833 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4835 xtermc|xterm terminal emulator (color),
4836 colors#8, ncv#7, pairs#64,
4837 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4838 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4840 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4844 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4845 # Here's a termcap entry I've been using for xterm_color, which comes
4846 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4847 # color stuff, I also have a status line defined as the window manager
4848 # title bar. [I have translated it to terminfo -- ESR]
4849 xterm-pcolor|xterm with color used for highlights and status line,
4851 bold=\E[1;43m, rev=\E[7;34m,
4852 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
4853 %t;7;31%;%?%p3%t;7;34%;m,
4854 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4856 # This describes the capabilities of color_xterm, an xterm variant from
4857 # before ECMA-64 color support was folded into the main-line xterm release.
4858 # This entry is straight from color_xterm's maintainer.
4859 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4860 # The README's with the distribution also say that it supports SGR 21, 24, 25
4861 # and 27, but they are not present in the terminfo or termcap.
4862 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4863 OTbs, am, km, mir, msgr, xenl, XT,
4864 cols#80, it#8, lines#65, ncv@,
4865 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4866 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4867 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4868 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4869 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4870 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4871 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4872 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
4873 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4874 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4875 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4876 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4877 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4878 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4879 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4880 rmso=\E[27m, rmul=\E[24m,
4881 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4883 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4884 %;m%?%p9%t\016%e\017%;,
4885 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4886 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4887 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4889 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4890 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4891 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4892 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4893 # that each of those implements the home, end, delete keys differently.
4895 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4896 # colors; note that this is not compatible with the 5.2 version.
4897 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4898 # match XFree86's xterm.terminfo usage and prevent circular links
4899 xterm-color|nxterm|generic color xterm,
4901 op=\E[m, use=xterm-r6, use=klone+color,
4903 # This entry describes an xterm with Sun-style function keys enabled
4904 # via the X resource setting "xterm*sunFunctionKeys:true"
4905 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4906 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4907 # because we want it to be seen as <kcpy>.
4908 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4909 # with their Sun keyboard labels instead.
4910 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4911 xterm-sun|xterm with sunFunctionKeys true,
4912 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4913 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4914 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4915 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4916 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4917 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4918 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4919 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4920 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4921 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4922 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4923 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4925 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4926 cols#80, lines#24, use=xterm-sun,
4929 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4930 gnome-rh62|Gnome terminal,
4932 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4935 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4937 # This implements a subset of vt102 with a random selection of features from
4938 # other terminals such as color and function-keys.
4940 # shift-f1 to shift-f10 are f11 to f20
4942 # NumLock changes the application keypad to approximate vt100 keypad, except
4943 # that there is no escape sequence matching comma (,).
4945 # Other defects observed:
4946 # vt100 LNM mode is not implemented.
4947 # vt100 80/132 column mode is not implemented.
4948 # vt100 DECALN is not implemented.
4949 # vt100 DECSCNM mode is not implemented, so flash does not work.
4950 # vt100 TBC (tab reset) is not implemented.
4951 # xterm alternate screen controls do not restore cursor position properly
4952 # it hangs in tack after running function-keys test.
4953 gnome-rh72|GNOME Terminal,
4955 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4956 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4957 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
4959 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4961 # GNOME Terminal 2.0.1 (Redhat 8.0)
4963 # Documentation now claims it implements vt220 (which is demonstrably false).
4964 # However, it does implement ECH, which is a vt220 feature. And there are
4965 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4966 # more of its bugs using vttest.
4968 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4969 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4971 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4972 # operations. Shift-tab generates a distinct sequence so it can be argued
4973 # that it implements kcbt.
4974 gnome-rh80|GNOME Terminal,
4976 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
4977 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4979 # GNOME Terminal 2.2.1 (Redhat 9.0)
4981 # bce and msgr are repaired.
4982 gnome-rh90|GNOME Terminal,
4984 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4985 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4986 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4989 # GNOME Terminal 2.14.2 (Fedora Core 5)
4990 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4991 gnome-fc5|GNOME Terminal,
4993 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
4995 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4997 # GNOME Terminal 2.18.1 (2007 snapshot)
4999 # For any "recent" version of gnome-terminal, it is futile to attempt to
5000 # support modifiers on cursor- and keypad keys because the program usually
5001 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5002 # of the keys (which more/less correspond to the termcap values), and will
5003 # interpret those according to the $TERM value, but others not in the
5004 # terminfo according to some constantly changing set of hacker guidelines -TD
5005 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5006 use=xterm+pcc2, use=gnome-fc5,
5007 gnome-2007|GNOME Terminal snapshot 2.18.1,
5010 # GNOME Terminal 2.22.3 (2008 snapshot)
5012 # In vttest, it claims to be a vt220 with national replacement character-sets,
5013 # but aside from the identifier string, implements only a small fraction of
5014 # vt220's behavior, which will make it less usable on a VMS system (unclear
5015 # what the intent of the developer is, since the NRC feature exposed in vttest
5016 # by this change does not work).
5017 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5018 use=vte+pcfkeys, use=vte-2007,
5019 gnome-2008|GNOME Terminal snapshot 2.22.3,
5022 # GNOME Terminal 3.6.0 (2012)
5023 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5024 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5027 # Testing with tack shows that flash does not/has not worked -TD
5028 vte-2012|VTE 0.34.1,
5030 dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
5031 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5032 %|%t;7%;m%?%p9%t\016%e\017%;,
5033 sitm=\E[3m, use=vte-2008,
5034 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5035 # 61 differences from a correct entry for gnome terminal.
5036 gnome-2012|GNOME Terminal 3.6.0,
5039 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
5040 # supply key information which is not built into the program. With 2.22.3,
5041 # this list is built into the program (which addresses the inadvertent use of
5042 # random terminfo data, though using a set of values which does not correspond
5043 # to any that xterm produces - still not solving the problem that GNOME
5044 # terminal hardcodes the $TERM variable as "xterm").
5046 # terminfo modifier code keys
5047 # kf13-kf24 shift 2 F1 to F12
5048 # kf25-kf36 control 5 F1 to F12
5049 # kf37-kf48 shift/control 6 F1 to F12
5050 # kf49-kf60 alt 3 F1 to F12
5051 # kf61-kf63 shift-alt 4 F1 to F3
5053 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5054 # no parameters. This appears to be rote copying based on xterm+pcc0.
5055 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5056 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5057 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5058 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5059 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5060 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5061 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5063 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5066 # deprecated - use "vte" for newer versions
5067 gnome|GNOME Terminal,
5070 # relevant changes were made in January 2014, and later.
5071 vte-2014|VTE 0.35.1,
5073 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5074 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5075 rmso=\E[27m, rmul=\E[24m, use=xterm+pcfkeys,
5078 vte|VTE aka GNOME Terminal,
5081 vte-256color|VTE with xterm 256-colors,
5082 use=xterm+256color, use=vte,
5083 gnome-256color|GNOME Terminal with xterm 256-colors,
5086 # XFCE Terminal 0.2.5.4beta2
5088 # This is based on some of the same source code, e.g., the VTE library, as
5089 # gnome-terminal, but has fewer features, fails more screens in vttest.
5090 # Since most of the terminfo-related behavior is due to the VTE library,
5091 # the terminfo is the same as gnome-terminal.
5096 # Multi-Gnome-Terminal 1.6.2
5098 # This does not use VTE, and does have different behavior (compare xfce and
5100 mgt|Multi GNOME Terminal,
5101 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5104 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5105 # or not is debatable).
5108 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5111 # (formerly known as kvt)
5113 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5114 # simplify this entry (and point out why konsole isn't xterm), we base this on
5115 # xterm-r6. The default keyboard appears to be 'linux'.
5118 # a) konsole implements several features from XFree86 xterm, though none of
5119 # that is documented - except of course in its source code - apparently
5120 # because its implementors are unaccustomed to reading documentation - as
5121 # evidenced by the sparse and poorly edited documentation distributed with
5122 # konsole. Some features such as the 1049 private mode are recognized but
5123 # incorrectly implemented as a duplicate of the 47 private mode.
5124 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5125 # sends PC-style escapes rather than vt100.
5126 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5127 # parse some control sequences. Also fails vttest Primary Device Attributes
5128 # by sending a bogus code (in the source it says it's supposed to be a
5129 # vt220, which is doubly incorrect because it does not implement vt220
5130 # control sequences except for a few special cases). Treat it as a
5131 # mildly-broken vt102.
5133 # Update for konsole 1.3.2:
5134 # The 1049 private mode works (but see the other xterm screens in vttest).
5135 # Primary Device Attributes now returns the code for a vt100 with advanced
5136 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5138 # Updated for konsole 1.6.4:
5139 # add konsole-solaris
5141 # Updated for konsole 1.6.6:
5142 # add control-key modifiers for function-keys, etc.
5144 # Updated for konsole 2.12.4:
5147 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5148 # different from xterm (and vt100's). They have the same behavior in this
5149 # detail, but it is unclear which copies the other.
5150 konsole-base|KDE console window,
5153 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
5154 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5155 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=^?, kdch1=\E[3~,
5156 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
5157 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
5158 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
5159 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5160 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5161 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5163 sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
5164 use=ecma+color, use=xterm-r6,
5165 konsole-linux|KDE console window with linux keyboard,
5166 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5167 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5168 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5169 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5170 konsole-solaris|KDE console window with Solaris keyboard,
5171 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5172 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
5173 # than testing the code.
5174 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5175 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5176 # The value for kbs reflects local customization rather than the settings used
5177 # for XFree86 xterm.
5178 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5179 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5181 # Konsole does not implement shifted cursor-keys.
5182 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5183 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
5185 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5186 # it is still useful for deriving the other entries.
5187 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5188 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5189 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5190 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5191 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5192 khome=\E[H, use=konsole-base,
5193 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5194 kbs=^H, kdch1=^?, use=konsole-vt100,
5195 konsole-16color|klone of xterm-16color,
5196 ncv#32, use=ibm+16color, use=konsole,
5197 # make a default entry for konsole
5198 konsole|KDE console window,
5201 konsole-256color|KDE console window with xterm 256-colors,
5202 use=xterm+256setaf, use=konsole,
5205 # http://mlterm.sourceforge.net/
5207 mlterm|multi lingual terminal emulator,
5210 # Tested mlterm 3.2.2:
5211 # mlterm 3.x has made changes, but they are not reflected in the included
5212 # mlterm.ti; this entry is based on testing with tack and vttest -TD
5213 mlterm3|multi lingual terminal emulator,
5214 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5215 ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
5216 use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
5218 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5220 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5223 # The function keys are numbered based on shift/control/alt modifiers, except
5224 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5225 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5226 # how it is configured.
5228 # kf1 to kf12 \E[11~ to \E[24~
5229 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5230 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5231 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5232 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5233 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5234 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5235 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5237 mlterm2|multi lingual terminal emulator,
5238 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5239 colors#8, cols#80, it#8, lines#24, pairs#64,
5240 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5241 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5242 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5243 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5244 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5245 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5246 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5247 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5248 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5249 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5250 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5251 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5252 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5253 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5254 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5255 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT,
5256 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
5257 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5258 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5259 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5260 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5262 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5263 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5264 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5265 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5267 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5268 # looks in its termcap to decide which string to send. If it used terminfo
5269 # (when available), it could use the extended names introduced for xterm.
5270 mlterm+pcfkeys|fragment for PC-style fkeys,
5271 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5272 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5273 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5274 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5275 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5276 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5277 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5278 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5279 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5281 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5282 use=xterm+256color, use=mlterm,
5285 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5286 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5289 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5290 # but some applications don't work with that.
5291 # It also has an AIX extension
5295 # but the latter does not work correctly.
5297 # The distributed terminfo says it implements hpa and vpa, but they are not
5298 # implemented correctly, using relative rather than absolute positioning.
5300 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5301 # Since rxvt is not really compatible with xterm, it should be configured as
5302 # "rxvt" or "rxvt-color".
5304 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5305 # remove km as per tack test -TD
5306 rxvt-basic|rxvt terminal base (X Window System),
5307 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5308 cols#80, it#8, lines#24,
5309 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5310 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5311 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5312 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5313 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5314 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5315 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5316 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5317 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5318 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5319 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5320 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5321 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5323 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5324 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5326 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5327 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5329 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5330 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5331 use=rxvt+pcfkeys, use=vt220+keypad,
5332 # Key Codes from rxvt reference:
5334 # Note: Shift + F1-F10 generates F11-F20
5336 # For the keypad, use Shift to temporarily override Application-Keypad
5337 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5338 # is off, escape sequences toggle Application-Keypad setting.
5339 # Also note that values of Home, End, Delete may have been compiled
5340 # differently on your system.
5342 # Normal Shift Control Ctrl+Shift
5343 # Tab ^I ESC [ Z ^I ESC [ Z
5344 # BackSpace ^H ^? ^? ^?
5345 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5346 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5347 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5348 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5349 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5350 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5351 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5352 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5353 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5354 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5355 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5356 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5357 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5358 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5359 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5360 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5361 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5362 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5363 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5364 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5365 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5366 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5367 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5368 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5369 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5370 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5371 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5372 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5373 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5376 # Up ESC [ A ESC [ a ESC O a ESC O A
5377 # Down ESC [ B ESC [ b ESC O b ESC O B
5378 # Right ESC [ C ESC [ c ESC O c ESC O C
5379 # Left ESC [ D ESC [ d ESC O d ESC O D
5380 # KP_Enter ^M ESC O M
5381 # KP_F1 ESC O P ESC O P
5382 # KP_F2 ESC O Q ESC O Q
5383 # KP_F3 ESC O R ESC O R
5384 # KP_F4 ESC O S ESC O S
5385 # XK_KP_Multiply * ESC O j
5386 # XK_KP_Add + ESC O k
5387 # XK_KP_Separator , ESC O l
5388 # XK_KP_Subtract - ESC O m
5389 # XK_KP_Decimal . ESC O n
5390 # XK_KP_Divide / ESC O o
5402 # The source-code for rxvt actually defines mappings for F21-F35, using
5403 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5404 # are rare, so this entry uses the shift- and control-modifiers as in
5405 # xterm+pcfkeys to define keys past F12.
5407 # kIC is normally not used, since rxvt performs a paste for that (shifted
5408 # insert), unless private mode 35 is set.
5410 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5411 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5412 rxvt+pcfkeys|fragment for PC-style fkeys,
5413 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5414 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5415 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5416 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5417 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5418 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5419 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5420 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5421 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5422 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5423 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5424 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5425 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5426 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5427 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5428 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5429 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5430 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5431 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5432 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5434 # rxvt was originally "xvt", first announced in April 1993:
5435 # http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
5437 # Though its change-log does not mention this, John Davis has stated that he
5438 # was the author of the changes to use the bce ("new color model") which was
5439 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5440 # dates, nor give developer's names. Initial color support was added for rxvt
5441 # "2.0", which was sometime in 1994.
5443 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5444 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5446 # http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5447 # was from one of my bug-reports -TD
5449 # While the color model both for xterm and rxvt was based on Linux console,
5450 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5451 # behavior: inserting/deleting characters does not fill the newly empty cell
5452 # with the default background color.
5453 rxvt|rxvt terminal emulator (X Window System),
5455 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5456 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5457 rxvt-color|rxvt terminal emulator (X Window System),
5459 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5460 use=xterm+256color, use=rxvt,
5461 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5462 use=xterm+88color, use=rxvt,
5463 rxvt-xpm|rxvt terminal emulator (X Window System),
5465 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5466 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5467 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5468 \302x\263y\363z\362{\343|\330}\234~\376,
5470 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5471 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5472 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5473 \302x\263y\363z\362{\343|\330~\376,
5476 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5477 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5478 rxvt-16color|rxvt with 16 colors like aixterm,
5479 ncv#32, use=ibm+16color, use=rxvt,
5484 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5485 # makes its function-keys different from other flavors of rxvt -TD
5487 # Testing with tack:
5488 # + made custom description (below) to work, though it sets TERM=xterm.
5490 # Testing with vttest:
5491 # + While "based on" rxvt, some of the basic functionality is broken. The
5492 # window collapses to a single line when running several of the screens
5493 # in vttest, e.g., the tests for cursor movement, screen features,
5494 # double-sized characters.
5495 # + The vt52 test works properly, but this is an exception. Due to the
5496 # other bug(s) most of vttest is untestable.
5497 # + the color test using ECH shows a gap in the bce model, like rxvt.
5499 # Testing with xterm "vttest" scripts:
5500 # + resize.pl does not work because mrxvt does implement CSI 18 t
5501 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5502 # + none of the "dynamic colors" (OSC colors) scripts work.
5503 mrxvt|multitabbed rxvt,
5505 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5506 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5507 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5508 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5509 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5510 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5513 mrxvt-256color|multitabbed rxvt with 256 colors,
5514 use=xterm+256color, use=mrxvt,
5517 # From: Michael Jennings <mej@valinux.com>
5521 # removed kf0 which conflicts with kf10 -TD
5522 # remove cvvis which conflicts with cnorm -TD
5523 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5524 # but does otherwise follow the rxvt+pcfkeys model -TD
5525 # remove nonworking flash -TD
5526 # remove km as per tack test -TD
5527 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5528 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5529 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5530 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5531 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5532 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5533 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5534 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5535 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5536 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5537 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5538 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5539 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5540 is1=\E[?47l\E>\E[?1l,
5541 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5542 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5543 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5544 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5545 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5546 rmso=\E[27m, rmul=\E[24m,
5547 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5548 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5551 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5552 %;m%?%p9%t\016%e\017%;,
5553 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5554 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5555 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5558 Eterm-256color|Eterm with xterm 256-colors,
5559 use=xterm+256color, use=Eterm,
5561 Eterm-88color|Eterm with 88 colors,
5562 use=xterm+88color, use=Eterm,
5565 # Based on rxvt 2.4.8, it has a few differences in key bindings
5566 aterm|AfterStep terminal,
5568 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5572 # This is not based on xterm's source...
5573 # vttest shows several problems with keyboard, cursor-movements.
5574 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5575 xiterm|internationalized terminal emulator for X,
5577 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5581 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5582 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5583 # chars look like --esr)
5584 hpterm|X-hpterm|hp X11 terminal emulator,
5585 am, da, db, mir, xhp,
5586 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5587 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
5588 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5589 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5590 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
5591 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5592 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5593 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5594 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5595 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5596 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5597 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5598 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5599 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5600 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5602 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
5603 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5604 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5605 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5606 # HPUX 11 provides a color version.
5607 hpterm-color|HP X11 terminal emulator with color,
5611 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5612 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5615 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5616 # It corresponds to emu's internal emulation:
5618 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5619 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5620 # fixes: add civis, cnorm, sgr -TD
5621 emu|emu native mode,
5622 am, bce, mir, msgr, xon,
5623 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5624 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
5625 \224t\225u\226v\227w\230x\231~\244,
5626 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5627 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5628 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5629 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5630 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5631 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5632 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5633 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5634 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
5635 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5636 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5637 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5638 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5639 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5640 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5641 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5643 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
5645 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5647 # vt220 Terminfo entry for the Emu emulation, corresponds to
5649 # with NumLock set (to make the keypad transmit kf0-kf9).
5650 # fixes: add am, xenl, corrected sgr0 -TD
5651 emu-220|Emu-220 (vt200-7bit mode),
5653 cols#80, it#8, lines#24, vt#200,
5654 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5655 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5656 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
5657 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5658 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5659 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5660 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5661 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5662 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5663 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5664 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5665 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5666 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5667 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5668 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5669 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5670 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5671 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5672 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5673 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5674 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5675 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
5676 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5677 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5678 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5681 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5682 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5683 # indicate that it emulates more than one terminal, but incompletely.
5685 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5686 # It is based on vt102's entry, with some subtle differences, but also
5688 # supports ANSI colors (except for 'op' string)
5689 # apparently implements alternate screen like xterm
5690 # does not use padding, of course.
5691 mvterm|vv100|SwitchTerm aka mvTERM,
5692 am, eslok, hs, km, mir, msgr, xenl,
5693 colors#8, cols#80, it#8, lines#24, pairs#64,
5694 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5695 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5696 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5697 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5698 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5699 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5700 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5701 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5702 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
5703 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5704 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5705 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5706 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5708 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5709 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5710 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5711 %;m%?%p9%t\016%e\017%;,
5712 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5713 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5714 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5718 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5720 # "mterm -type ansi" sets $TERM to "ansi"
5721 mterm-ansi|ANSI emulation,
5724 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5725 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
5726 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5727 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5728 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5729 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5730 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5731 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5732 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5733 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5735 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5736 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5737 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5739 # mterm normally sets $TERM to "mterm"
5740 mterm|mouse-sun|Der Mouse term,
5743 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
5744 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5745 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
5746 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5747 # "mterm -type decansi" sets $TERM to "decansi"
5749 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5750 decansi|ANSI emulation with DEC compatibility hacks,
5751 am, mir, msgr, xenl,
5752 colors#8, it#8, pairs#64,
5753 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5754 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5755 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
5756 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5757 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5758 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5759 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5760 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5761 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5762 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5763 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5764 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5765 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5766 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5767 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5768 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5769 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5770 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5771 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5772 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5773 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5774 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5775 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5776 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5777 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5778 u7=\E[6n, vpa=\E[%i%p1%dd,
5781 # http://vwm.sourceforge.net/
5783 # VWM 2.0.2 (2009-05-01)
5784 # vwmterm is a terminal emulator written for the VWM console window manager.
5785 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5787 am, bce, ccc, mir, msgr, npc, xenl, xon,
5789 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5790 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5791 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
5792 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5793 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5794 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5795 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
5796 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5797 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5798 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5799 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5800 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5801 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5802 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5803 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
5804 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5805 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5806 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5810 # MGR is a Bell Labs window system lighter-weight than X.
5811 # These entries describe MGR's xterm-equivalent.
5812 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5815 mgr|Bellcore MGR (non X) window system terminal emulation,
5817 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
5818 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5819 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5820 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5821 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5822 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5823 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5824 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
5825 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5827 mgr-sun|Mgr window with Sun keyboard,
5828 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5829 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5830 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5831 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5832 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5833 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5834 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5835 mgr-linux|Mgr window with Linux keyboard,
5836 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5837 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5838 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5839 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5840 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5846 # This version uses a table which supports a single modifier (a subset of
5847 # xterm's keys, using the same scheme). Because it supports only a single
5848 # modifier in this table, function keys f36-f48 are normally unavailable
5849 # because they are assigned to modifier-4.
5851 # The program assigns TERM to match the program name (the upstream source says
5852 # "st", but Debian renames it to "stterm").
5854 # The source includes two entries which are not useful here:
5855 # st-meta| simpleterm with meta key,
5856 # st-meta-256color| simpleterm with meta key and 256 colors,
5857 # because st's notion of "meta" does not correspond to the terminfo definition.
5858 # Rather, it acts like xterm - when the meta feature is disabled.
5861 # Added eo, removed ul -TD
5864 # implements control-modifier, but not control-shift for special keys
5865 # implements alt-modifier, but not alt-shift for special keys
5868 # http://git.suckless.org/st/log/st.info
5869 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
5870 # still has no function keys past kf36 (no combinations of modifiers)
5871 # no application keypad mode, e.g, kent.
5872 st|stterm| simpleterm 0.4.1,
5873 am, bce, hs, mir, msgr, npc, xenl, Tc, XT,
5874 colors#8, cols#80, it#8, lines#24, pairs#64,
5875 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
5877 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5878 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5879 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5880 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5881 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5882 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5883 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5884 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
5885 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5886 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5887 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
5888 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
5889 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
5890 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
5891 kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5892 kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F,
5893 kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
5894 kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
5895 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5896 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5897 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5898 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5899 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5900 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5901 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5902 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5903 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5904 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5905 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
5906 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5907 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5908 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5909 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5910 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5911 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5912 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
5913 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5914 ritm=\E[23m, rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l,
5915 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5916 rs2=\E[4l\E>\E[?1034l, sc=\E7, setab=\E[4%p1%dm,
5918 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5920 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5922 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5923 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5924 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5925 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5926 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5927 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
5932 # Note: the original terminfo description uses leading blank to persuade
5933 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5936 # Reading the code shows it should work for aixterm 16-colors
5937 # - added st-16color
5940 # - set eo (erase-overstrike)
5942 # - tbc doesn't work
5944 # - cbt doesn't work
5945 # - shifted cursor-keys send sequences like rxvt
5946 # - sgr referred to unimplemented "invis" mode.
5947 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5948 simpleterm|old-st| simpleterm 0.1.1,
5949 am, eo, mir, msgr, ul, xenl,
5950 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5951 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5952 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5953 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
5954 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5955 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5956 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5957 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5958 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?,
5959 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5960 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5961 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5962 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5963 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5964 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5965 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5966 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5968 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5969 st-16color|stterm-16color|simpleterm with 16-colors,
5970 use=ibm+16color, use=st,
5971 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5972 # shown in the titlebar.
5974 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5975 # characters, making the choice nonportable.
5976 st-256color|stterm-256color|simpleterm with 256 colors,
5978 initc@, oc@, use=xterm+256color, use=st,
5981 # https://code.google.com/p/jessies/
5982 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5983 # Debian/current -TD (2011/8/20)
5985 # There are some packaging problems:
5986 # a) using Java, the program starts off using 50Mb, and climbs from there,
5987 # up to 114Mb after testing (no scrollback).
5988 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5989 # (two copies, just in case the host happens to be Mac OS X).
5990 # I deleted this after testing with tack.
5992 # Issues/features found with tack:
5993 # a) tbc does not work (implying that hts also is broken).
5994 # Comparing with the tabs utility shows a problem with the last tabstop on
5996 # b) has xterm-style shifted function-key strings
5997 # meta also is used, but control is ignored.
5998 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6000 # d) some combinations of shift/control send xterm-style sequences for
6001 # insert/delete/home/end.
6002 # e) numeric keypad sends only numbers (compare with vttest).
6003 # f) meta mode (km) is not implemented.
6005 # Issues found with ncurses test-program:
6006 # a) bce is inconsistently implemented
6007 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6009 # Checked with vttest, found low degree of compatibility there.
6011 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6015 # b) corrected sgr0 to reset alternate character set
6016 # c) modified smacs/rmacs to use SCS rather than SI/SO
6019 terminator|Terminator no line wrap,
6020 eo, mir, msgr, xenl, xon,
6021 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
6022 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6023 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6024 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6025 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6026 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6027 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6028 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6029 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
6030 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
6031 is1=\E[?47l\E=\E[?1l,
6032 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6033 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6034 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6035 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6036 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6037 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6038 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6039 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6040 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6041 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6042 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6043 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6044 setaf=\E[38;5;%p1%dm,
6045 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6047 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6048 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6052 # http://enlightenment.org
6054 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6055 # emulator, nor is it compatible with xterm, but it uses a few features from
6059 # cursor does not fill on focus
6060 # there are pervasive problems with clearing/erasing parts of the screen
6061 # resizing the window causes it to stop listening to the keyboard
6063 # doesn't understand vt100 CPR needed for resize
6068 # uses bce model for colors, but (see below) fails the vttest screens
6069 # has partial support for 256color feature.
6070 # tack function-keys (a subset of xterm+pcf0), and
6071 # tack cursor-keys (a subset of xterm+pce2):
6072 # ctrl+shift (ignored)
6074 # shift-alt modifier -> shift (2)
6078 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6079 # ctrl + khome/kend works - none of the other modifiers do
6081 # spits lots of messages from termptyesc.c especially in vttest.
6082 # no 132-column mode
6083 # fails menu 1, 2 (definitely not vt100-compatible)
6084 # primary (claims vt420 with several options, apparently none work) and
6085 # secondary report says (perhaps... vt420): \E[>41;285;0c
6086 # CHA, HPR, VPA, CNL, CPL work
6087 # BCE with ED/EL - fail
6088 # BCE with ECH/indexing - fail
6090 # unlike teken, background light/dark works
6092 # X10 and Normal mouse work
6093 # Any-event mouse works
6094 # Mouse button-event works
6096 # This description uses xterm+pcf0, which is misleading because the program
6097 # does not handle combinations of modifiers - but listing them all would
6098 # involve more effort than its developers spent -TD
6099 terminology|EFL-based terminal emulator,
6101 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6102 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6103 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6104 kind=\E[1;2B, kri=\E[1;2A,
6105 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6106 %;m%?%p9%t\016%e\017%;$<2>,
6107 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6108 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6109 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6110 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6111 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6112 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6113 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6114 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6117 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6120 # Columbus UNIX virtual terminal. This terminal also appears in
6121 # UNIX 4.0 and successors as line discipline 1 (?), but is
6122 # undocumented and does not really work quite right.
6123 cbunix|cb unix virtual terminal,
6125 cols#80, lines#24, lm#0,
6126 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
6127 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6128 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
6129 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6130 smso=\Ea^D, smul=\Ea^A,
6131 # (vremote: removed obsolete ":nl@:" -- esr)
6132 vremote|virtual remote terminal,
6134 cols#79, use=cbunix,
6136 pty|4bsd pseudo teletype,
6137 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6138 smso=\Ea$, smul=\Ea!, use=cbunix,
6142 # https://www.emacswiki.org/emacs/AnsiTerm
6143 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6145 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6146 eterm|gnu emacs term.el terminal emulation,
6149 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6150 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6151 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6152 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6153 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6154 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6155 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
6156 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6157 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6160 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6161 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6162 am, mir, msgr, xenl,
6163 colors#8, cols#80, lines#24, pairs#64,
6164 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6165 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6166 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6167 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6168 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6169 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6170 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
6171 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6172 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6173 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6174 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6175 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6176 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6178 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6179 u6=\E[%i%d;%dR, u7=\E[6n,
6181 # shell.el can "do" color, though not nearly as well.
6184 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6187 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6188 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6189 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6191 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6192 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6193 # italics but does not lose the color information -TD 2017/01/28.
6194 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6196 colors#8, it#8, ncv#13, pairs#64,
6197 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
6198 ritm=\E[23m, rmul=\E[24m, setab=\E[4%p1%dm,
6199 setaf=\E[3%p1%dm, sgr0=\E[m, sitm=\E[3m, smul=\E[4m,
6203 # Entries for use by the `screen' program by Juergen Weigert,
6204 # Michael Schroeder, Oliver Laumann. The screen and
6205 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6206 # come from University of Wisconsin and may be older.
6207 # (screen: added <cnorm> on ANSI model -- esr)
6209 # 'screen' defines extensions to termcap. Some are used in its terminal
6211 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6212 # AX (bool) Does understand ANSI set default fg/bg color
6213 # (\E[39m / \E[49m).
6214 # S0 (str) Switch charset 'G0' to the specified charset.
6215 # E0 (str) Switch charset 'G0' back to standard charset.
6217 # Initially tested with screen 3.09.08
6219 # According to its manual page
6221 # Screen is a full-screen window manager that multiplexes a physical
6222 # terminal between several processes (typically interactive shells). Each
6223 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6224 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6225 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6226 # multiple character sets).
6228 # However, there is a design error in its support for video highlights. The
6229 # program uses a table (rendlist) which equates the SGR codes to terminal
6230 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6231 # is modified only by the presence or absence of the corresponding capabilities.
6232 # Not by their values.
6234 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6235 # correspond to the rendlist table.
6237 # The table gives this information:
6249 # 22 reset bold, standout and dim
6251 # 24 reset underline
6256 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6257 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6258 # Without some redesign of screen, it is not possible to extend the set of
6259 # capabilities. Substitution would be possible, e.g., sending italics in
6260 # place of underline.
6262 # Because screen uses hard-coded parsing, it does not check if two capabilities
6263 # use the same value. For example, changing standout to be the same as any of
6264 # the other capabilities will confuse screen. Curses applications which use
6265 # sgr are not impacted (because that usually resets all capabilities before
6266 # setting any), but termcap applications do not use sgr -TD
6267 screen|VT 100/ANSI X3.64 virtual terminal,
6268 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6269 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6270 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6272 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6273 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
6274 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6275 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6276 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6277 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6278 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6279 enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
6280 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0,
6281 kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6282 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6283 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6284 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6285 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6286 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6287 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6288 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6289 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6290 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6291 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6292 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
6293 S0=\E(%p1%c, use=ecma+color,
6294 # The bce and status-line entries are from screen 3.9.13 (and require some
6295 # changes to .screenrc).
6296 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6299 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6300 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6302 # ======================================================================
6303 # Entries for GNU Screen with 16 colors.
6304 # Those variations permit to benefit from 16 colors palette, and from
6305 # bold font and blink attribute separated from bright colors. But they
6306 # are less portable than the generic "screen" 8 color entries: Their
6307 # usage makes real sense only if the terminals you attach and reattach
6308 # do all support 16 color palette.
6310 screen-16color|GNU Screen with 16 colors,
6311 use=ibm+16color, use=screen,
6313 screen-16color-s|GNU Screen with 16 colors and status line,
6314 use=ibm+16color, use=screen-s,
6316 screen-16color-bce|GNU Screen with 16 colors and BCE,
6317 use=ibm+16color, use=screen-bce,
6319 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6320 bce, use=ibm+16color, use=screen-s,
6322 # ======================================================================
6323 # Entries for GNU Screen 4.02 with --enable-colors256.
6325 screen-256color|GNU Screen with 256 colors,
6326 use=xterm+256setaf, use=screen,
6328 screen-256color-s|GNU Screen with 256 colors and status line,
6329 use=xterm+256setaf, use=screen-s,
6331 screen-256color-bce|GNU Screen with 256 colors and BCE,
6332 bce, use=xterm+256setaf, use=screen-bce,
6334 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6335 bce, use=xterm+256setaf, use=screen-s,
6337 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6338 use=xterm+256setaf, use=screen.xterm-new,
6340 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6341 use=xterm+256setaf, use=screen.konsole,
6343 screen.vte-256color|GNU Screen with vte using 256 colors,
6344 use=xterm+256setaf, use=screen.vte,
6346 screen.putty-256color|GNU Screen with putty using 256 colors,
6347 use=xterm+256setaf, use=screen.putty,
6349 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6350 use=xterm+256setaf, use=screen.mlterm,
6352 # ======================================================================
6354 # Read the fine manpage:
6355 # When screen tries to figure out a terminal name for
6356 # itself, it first looks for an entry named "screen.<term>",
6357 # where <term> is the contents of your $TERM variable. If
6358 # no such entry exists, screen tries "screen" (or "screen-w"
6359 # if the terminal is wide (132 cols or more)). If even this
6360 # entry cannot be found, "vt100" is used as a substitute.
6362 # Notwithstanding the manpage, screen uses its own notion of the termcap
6363 # and some keys from "screen.<term>" are ignored. Here is an entry which
6364 # covers those (tested with screen 4.00.02) -TD
6365 screen+fkeys|function-keys according to screen,
6366 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6369 # See explanation before "screen" entry. Cancel italics so that applications
6370 # do not assume screen supports the feature. Add this tweak to entries which
6371 # extend screen for terminals which do support italics.
6372 screen+italics|screen cannot support italics,
6375 # Here are a few customized entries which are useful -TD
6378 # (a) screen does not support invis.
6379 # (b) screen's implementation of bw is incorrect according to tack.
6380 # (c) screen appears to hardcode the strings for khome/kend, making it
6381 # necessary to override the "use=" clause's values (screen+fkeys).
6382 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6383 # which is NOT the same as the terminfo screen.<term>.
6384 # (e) when screen finds one of these customized entries, it sets $TERM to
6385 # match. Hence, no "screen.xterm" entry is provided, since that would
6386 # create heartburn for people running remote xterm's.
6388 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6389 # since the default translations override the built-in keycode
6390 # translation. They are suppressed here to show what is tested by tack.
6391 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6393 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
6394 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6395 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6396 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
6397 #:screen.xterm|screen for modern xterm,
6398 #: use=screen.xterm-new,
6399 # xterm-r6 does not really support khome/kend unless it is propped up by
6400 # the translations resource.
6401 screen.xterm-r6|screen customized for X11R6 xterm,
6402 bw, use=screen+fkeys, use=xterm-r6,
6403 # Color applications running in screen and TeraTerm do not play well together
6404 # on Solaris because Sun's curses implementation gets confused.
6405 screen.teraterm|disable ncv in teraterm,
6407 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
6408 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
6409 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6410 use=screen+fkeys, use=screen,
6412 screen.rxvt|screen in rxvt,
6414 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6415 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6416 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
6417 screen.Eterm|screen in Eterm,
6418 use=screen+fkeys, use=Eterm,
6419 screen.mrxvt|screen in mrxvt,
6420 use=screen+fkeys, use=mrxvt,
6421 screen.vte|screen in any VTE-based terminal,
6422 use=screen+italics, use=screen+fkeys, use=vte,
6423 screen.gnome|screen in GNOME Terminal,
6424 use=screen+italics, use=screen+fkeys, use=gnome,
6425 screen.konsole|screen in KDE console window,
6426 use=screen+italics, use=screen+fkeys, use=konsole,
6427 # fix the backspace key
6428 screen.linux|screen in linux console,
6430 kbs=^?, kcbt@, use=screen+fkeys, use=screen,
6431 screen.mlterm|screen in mlterm,
6432 use=screen+fkeys, use=mlterm,
6433 screen.putty|screen in putty,
6434 use=screen+fkeys, use=putty,
6436 # The default "screen" entry is reasonably portable, but not optimal for the
6437 # most widely-used terminal emulators. The "bce" capability is supported in
6438 # screen since 3.9.13, and when used, will require fewer characters to be sent
6439 # to the terminal for updates.
6441 # If you are using only terminals which support bce, then you can use this
6442 # feature in your screen configuration.
6444 # Adding these lines to your ".screenrc" file will allow using these customized
6449 screen-bce.xterm-new|screen optimized for modern xterm,
6451 ech@, use=screen+italics, use=screen.xterm-new,
6452 screen-bce.rxvt|screen optimized for rxvt,
6454 ech@, use=screen.rxvt,
6455 screen-bce.Eterm|screen optimized for Eterm,
6457 ech@, use=screen.Eterm,
6458 screen-bce.mrxvt|screen optimized for mrxvt,
6460 ech@, use=screen.mrxvt,
6461 screen-bce.gnome|screen optimized for GNOME-Terminal,
6463 ech@, use=screen+italics, use=screen.gnome,
6464 screen-bce.konsole|screen optimized for KDE console window,
6466 ech@, use=screen+italics, use=screen.konsole,
6467 screen-bce.linux|screen optimized for linux console,
6469 ech@, use=screen.linux,
6471 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6472 cols#132, use=screen,
6474 screen2|old VT 100/ANSI X3.64 virtual terminal,
6475 cols#80, it#8, lines#24,
6476 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
6477 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6478 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6479 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6480 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6481 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6482 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6483 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6484 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6485 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6486 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6487 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6488 screen3|older VT 100/ANSI X3.64 virtual terminal,
6490 cols#80, it#8, lines#24,
6491 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6492 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6493 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6495 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6496 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6497 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
6498 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6499 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6500 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6501 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6502 smul=\E[4m, tbc=\E[3g,
6506 # tmux is compatible with screen, but has support for italics, and some of the
6507 # xterm cursor bits.
6508 tmux|tmux terminal multiplexer,
6509 ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
6510 use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
6511 use=xterm+sl, use=xterm+tmux, use=screen,
6513 tmux-256color|tmux with 256 colors,
6514 use=xterm+256setaf, use=tmux,
6519 # http://www.brain-dump.org/projects/dvtm/
6521 # + This uses ncurses to manage the display, including support for italics and
6523 # + However, default-colors are incomplete: do not set bce.
6524 # + It does not implement flash (since no \e[?5h)
6525 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
6526 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
6527 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
6528 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
6530 # + It also omits the shifted cursor- and editing-keypad keys.
6531 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
6532 # (and passes those through without interpretation)
6533 # and may simply pass-through rxvt's, making it appear to work.
6534 # In other cases such as kf23 and up, no pass-through is done.
6535 # + Most of the mode-settings in the initialization/reset strings are not
6536 # implemented; dvtm copies its description from rxvt.
6537 dvtm|dynamic virtual terminal manager,
6538 am, eo, mir, msgr, xenl, AX,
6539 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
6540 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6541 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6542 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
6543 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6544 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6545 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6546 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6547 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
6548 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6549 is1=\E[?47l\E=\E[?1l,
6550 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
6551 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6552 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
6553 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6554 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6555 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
6556 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6557 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6558 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6559 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
6560 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6561 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
6562 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
6563 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m,
6564 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
6566 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6567 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6569 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
6571 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6573 sgr0=\E[m\017, sitm=\E[3m, smacs=^N, smcup=\E7\E[?47h,
6574 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6577 dvtm-256color|dynamic virtual terminal manager with 256 colors,
6578 colors#256, pairs#32767,
6579 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
6581 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
6587 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
6588 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
6589 # been maintained until recently by the National Center for Supercomputer
6590 # Applications, and it is feature rich, stable and free. It can be downloaded
6591 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
6592 # xterm+sl, and the docs at NCSA. It works well.
6594 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
6595 # The terminal options should be set as follows:
6596 # Xterm sequences ON
6597 # use VT wrap mode ON
6598 # use Emacs arrow keys OFF
6599 # CTRL-COMND is Emacs meta ON
6601 # answerback string: "ncsa-vt220-8"
6602 # setup keys: all disabled
6604 # Application mode is not used.
6606 # Other special mappings:
6613 # PAGEDOWN Next Screen
6615 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
6618 # The status-line manipulation is a mapping of the xterm-compatible control
6619 # sequences for setting the window-title. So you must use tsl and fsl in
6620 # pairs, since the latter ends the string that is loaded to the window-title.
6621 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6622 am, km, mir, msgr, xenl,
6623 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6624 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6625 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
6626 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6627 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6628 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6629 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6630 el=\E[K, el1=\E[1K, enacs=\E)0,
6631 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
6632 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
6633 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
6634 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
6635 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6636 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6637 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6638 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6639 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6640 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6641 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6642 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6643 rmso=\E[27m, rmul=\E[24m,
6644 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6645 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
6647 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6648 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6649 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6650 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6651 use=ncsa-m, use=klone+color,
6652 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6654 dsl@, fsl@, tsl@, use=ncsa,
6655 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6657 dsl@, fsl@, tsl@, use=ncsa-m,
6659 # The documented function-key mapping refers to the Apple Extended Keyboard
6660 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6661 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6662 # some keyboards and many applications require these as F1-F4.
6664 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6665 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6666 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6667 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6668 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6669 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6671 #### Pilot Pro Palm-Top
6673 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6674 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
6675 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6678 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
6679 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6680 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
6683 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6684 # These entries are for the Embeddable Linux Kernel System (ELKS)
6685 # project - an heavily stripped down Linux to be run on 16 bit
6686 # boxes or, eventually, to be used in embedded systems - and have been
6687 # adapted from the stock ELKS termcap. The project itself looks stalled,
6688 # and the latest improvements I know of date back to March 2000.
6690 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6691 # as an added bonus, this deals with all the capabilities common to
6692 # both VT52 and ANSI (or, eventually, "special") modes.
6694 elks-glasstty|ELKS glass-TTY capabilities,
6696 cols#80, it#8, lines#25,
6697 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
6700 elks-vt52|ELKS vt52 console,
6701 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6702 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6703 home=\EH, use=elks-glasstty,
6705 elks-ansi|ELKS ANSI console,
6706 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6707 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6708 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6710 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6711 # instead of VT52, but the "elks" entry still refers to the latter.
6713 elks|default ELKS console,
6716 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6717 # one but in screen size
6719 sibo|ELKS SIBO console,
6720 cols#61, it#8, lines#20, use=elks-vt52,
6722 ######## COMMERCIAL WORKSTATION CONSOLES
6728 # This is from the OSF/1 Release 1.0 termcap file
6729 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6732 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6733 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6734 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6735 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6736 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6741 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6742 oldsun|Sun Microsystems Workstation console,
6743 OTbs, am, km, mir, msgr,
6744 cols#80, it#8, lines#34,
6745 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
6746 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6747 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6748 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6749 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6750 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6751 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6752 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6753 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6754 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6755 sun-il|Sun Microsystems console with working insert-line,
6758 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6759 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6760 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6761 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6762 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6763 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
6764 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6765 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6766 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6767 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6768 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6769 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6770 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6771 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6772 # flake out on the last line. Unfortunately, without them the terminal has no
6774 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6775 il@, il1@, use=sun-il,
6776 # If you are using an SS5, change the sun definition to use sun-ss5.
6777 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6780 sun+sl|Sun Workstation window status line,
6782 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6784 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6785 sun-s|Sun Microsystems Workstation window with status line,
6787 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6788 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6790 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6791 sun-48|Sun 48-line window,
6792 cols#80, lines#48, use=sun,
6793 sun-34|Sun 34-line window,
6794 cols#80, lines#34, use=sun,
6795 sun-24|Sun 24-line window,
6796 cols#80, lines#24, use=sun,
6797 sun-17|Sun 17-line window,
6798 cols#80, lines#17, use=sun,
6799 sun-12|Sun 12-line window,
6800 cols#80, lines#12, use=sun,
6801 sun-1|Sun 1-line window for sysline,
6804 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
6805 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6806 ich1@, rmir@, smir@, use=sun,
6807 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6809 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6810 sun-type4|Sun Workstation console with type 4 keyboard,
6811 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6812 kcuu1=\E[215z, use=sun-il,
6814 # Most of the current references to sun-color are from users wondering why this
6815 # is the default on install. Details from reading the wscons manpage, adding
6816 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6817 # when those were added -TD (2005-05-28)
6819 # According to wscons manpage, color is supported only on IA systems.
6820 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6821 # does not list these. It also sets ncv#3, however that corresponds to
6822 # underline and standout.
6824 # Since the documentation and terminfo do not agree, see also current code at
6825 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6827 # That (actually a different driver which "supports" sun-color) also supports
6834 # It supports bold, but not underline -TD (2009-09-19)
6835 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6836 colors#8, ncv#3, pairs#64,
6837 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6838 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6839 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6840 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6842 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6844 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6845 smso=\E[7m, use=sun,
6850 # (wsiris: this had extension capabilities
6851 # :HS=\E7F2:HE=\E7F7:\
6852 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6853 # See the note on Iris extensions near the end of this file.
6854 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6855 # <flash> from BRL -- esr)
6856 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6857 OTbs, OTnc, OTpt, am,
6858 OTkn#3, cols#80, it#8, lines#40,
6859 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6860 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6861 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6862 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6863 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6864 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6865 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6866 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6871 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6872 # environment). Note: these have nothing to do with Sony's News workstation
6876 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6877 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6878 psterm|psterm-basic|NeWS psterm-80x34,
6879 OTbs, am, hs, km, ul,
6880 cols#80, it#8, lines#34,
6881 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6882 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6883 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6884 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6885 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6886 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6887 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6889 psterm-96x48|NeWS psterm 96x48,
6890 cols#96, lines#48, use=psterm,
6891 psterm-90x28|NeWS psterm 90x28,
6892 cols#90, lines#28, use=psterm,
6893 psterm-80x24|NeWS psterm 80x24,
6894 cols#80, lines#24, use=psterm,
6895 # This is a faster termcap for psterm. Warning: if you use this termcap,
6896 # some control characters you type will do strange things to the screen.
6897 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6898 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6899 OTbs, am, hs, km, ul,
6900 cols#80, it#8, lines#34,
6901 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6902 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6903 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6904 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6905 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6906 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6907 smso=^Oo, smul=^Ou, tsl=^Ol,
6911 # Use `glasstty' for the Workspace application
6914 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6917 cols#80, it#8, lines#24,
6918 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6919 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6920 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
6921 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6922 nextshell|NeXT Shell application,
6925 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
6928 #### Sony NEWS workstations
6931 # (news-unk: this had :KB=news: -- esr)
6932 news-unk|SONY NEWS vt100 emulator common entry,
6933 OTbs, OTpt, am, xenl,
6935 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6936 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
6937 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6938 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6939 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6940 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6941 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6942 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6943 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6944 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6945 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6946 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6948 # (news-29: this had :TY=ascii: --esr)
6950 lines#29, use=news-unk,
6951 # (news-29-euc: this had :TY=euc: --esr)
6954 # (news-29-sjis: this had :TY=sjis: --esr)
6958 # (news-33: this had :TY=ascii: --esr)
6960 lines#33, use=news-unk,
6961 # (news-33-euc: this had :TY=euc: --esr)
6964 # (news-33-sjis: this had :TY=sjis: --esr)
6968 # (news-42: this had :TY=ascii: --esr)
6970 lines#42, use=news-unk,
6971 # (news-42-euc: this had :TY=euc: --esr)
6974 # (news-42-sjis: this had :TY=sjis: --esr)
6978 # NEWS-OS old termcap entry
6980 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6981 news-old-unk|SONY NEWS vt100 emulator common entry,
6982 OTbs, OTpt, am, xenl,
6984 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6985 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
6986 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6987 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6988 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6989 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6990 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6991 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6992 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6994 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6995 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6998 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7002 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
7003 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
7005 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
7008 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
7009 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
7012 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7016 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
7017 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
7020 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7024 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
7025 # also the alias vt100-bm.
7026 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
7029 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7033 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7034 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7037 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7041 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7042 news28|sony vt100 emulator 28 lines,
7045 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7049 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7050 news29|news28-a|sony vt100 emulator 29 lines,
7052 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7056 # (news511: this had :TY=sjis: --esr)
7057 nwp511|nwp-511|nwp-511 vt100,
7058 OTbs, OTpt, am, xenl,
7060 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7061 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7062 ed=\E[J$<30/>, el=\E[K$<3/>,
7063 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7064 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7065 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7066 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7067 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7068 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7069 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7070 # (news517: this had :TY=sjis:. --esr)
7071 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7074 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7075 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7076 tsl=\E[1$}\E[;%df, use=vt200,
7077 # (news517-w: this had :TY=sjis:. --esr)
7078 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7081 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7082 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7083 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7084 tsl=\E[1$}\E[;%df, use=vt200,
7086 #### Common Desktop Environment
7089 # This ships with Sun's CDE in Solaris 2.5
7090 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7091 dtterm|CDE desktop terminal,
7092 am, mir, msgr, xenl, xon,
7093 cols#80, it#8, lines#24, lm#0, ncv@,
7094 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7095 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7096 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
7097 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7098 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7099 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7100 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7101 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7102 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7103 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7104 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7105 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7106 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7107 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7108 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7109 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7110 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7111 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7112 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7113 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7115 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7116 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7117 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7118 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7120 ######## Non-Unix Consoles
7123 #### EMX termcap.dat compatibility modes
7125 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7126 # no_color_video to inform the application that standout(1), underline(2)
7127 # reverse(4) and invisible(64) don't work with color.
7128 emx-base|DOS special keys,
7131 bel=^G, use=ansi.sys,
7133 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7134 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7135 # names longer than 14 characters, the nominal maximum).
7137 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7138 ansi-emx|ANSI.SYS color,
7139 am, bce, eo, mir, msgr, xon,
7140 colors#8, cols#80, it#8, lines#25, pairs#64,
7141 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7142 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
7143 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7144 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7145 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7146 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
7147 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
7148 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7149 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7150 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7151 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7152 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7153 # nice colors for Emacs (white on blue, mode line white on cyan)
7154 ansi-color-2-emx|ANSI.SYS color 2,
7155 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7156 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7157 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7158 smul=\E[1;36;44m, use=ansi-emx,
7159 # nice colors for Emacs (white on black, mode line black on cyan)
7160 ansi-color-3-emx|ANSI.SYS color 3,
7161 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7162 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7163 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7164 smul=\E[0;36;40m, use=ansi-emx,
7165 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7167 cols#80, it#8, lines#24,
7168 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7169 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7170 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7171 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7172 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7173 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
7178 # Use this for cygwin32 (tested with beta 19.1)
7179 # underline is colored bright magenta
7180 # shifted kf1-kf12 are kf11-kf22
7181 cygwinB19|ansi emulation for cygwin32,
7182 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7183 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7184 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7185 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7186 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7187 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7188 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7191 # Use this for cygwin (tested with version 1.1.0).
7192 # I've combined pcansi and linux. Some values of course were different and
7193 # I've indicated which of these were and which I used.
7194 # Cheers, earnie_boyd@yahoo.com
7195 # several changes based on running with tack and comparing with older entry -TD
7196 # more changes from csw:
7198 # remove eo [erase overstrike with blank]
7199 # change clear was \E[H\E[J now \E[2J (faster?)
7202 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7204 # add cub [cursor back param]
7205 # add cuf [cursor forward param]
7206 # add cuu [cursor up param]
7207 # add cud [cursor down param]
7208 # add hs [has status line]
7209 # add fsl [return from status line]
7210 # add tsl [go to status line]
7211 # add smacs [Start alt charset] (not sure if this works)
7212 # add rmacs [End alt charset] (ditto)
7213 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7214 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7215 # add kb2 [center of keypad]
7216 # add u8 [user string 8] \E[?6c
7217 # add el [clear to end of line] \E[K
7219 # cnorm [make cursor normal] not implemented
7220 # flash [flash] not implemented
7221 # blink [blink] not implemented very usefully in cygwin? \E[5m
7222 # dim [dim] not implemented very usefully in cygwin? \E[2m
7223 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7224 # kNXT [shifted next key] not implemented
7225 # kPRV [shifted prev key] not implemented
7226 # khome [home key] really is \E[1~ NOT \E[H
7227 # tbc [clear tab stops] not implemented
7228 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
7229 # smpch [Start PC charset] is \E[11m, same as smacs
7230 # rmpch [End PC charset] is \E[10m, same as rmacs
7231 # mir [move in insert mode] fails in tack?
7232 # bce [back color erase] causes problems with change background color?
7233 # cvvis [make cursor very visible] causes a stackdump when testing with
7234 # testcurs using the output option? \E[?25h\E[?8c
7235 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7236 # ech [erase characters param] broken \E[%p1%dX
7237 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7240 # Remove cbt since it does not work in current cygwin
7241 # Add 'mir' and 'in' flags based on tack
7242 cygwin|ansi emulation for Cygwin,
7243 am, hs, mir, msgr, xon,
7244 colors#8, it#8, pairs#64,
7245 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7246 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7247 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7248 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
7249 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7250 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7251 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7252 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7253 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7254 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
7255 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7256 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7257 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7258 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7259 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7260 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7261 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7262 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7263 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7264 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7265 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7266 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7267 %t;8%;%?%p9%t;11%;m,
7268 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7269 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7270 vpa=\E[%i%p1%dd, use=vt102+enq,
7272 # I've supplied this so that you can help test new values and add other
7273 # features. Cheers, earnie_boyd@yahoo.com.
7275 # Some features are from pcansi. The op value is from linux. Function-keys
7276 # are from linux. These have been tested not to cause problems. xenl was in
7277 # this list, but DOES cause problems so it has been removed
7278 cygwinDBG|Debug Version for Cygwin,
7279 am, eo, mir, msgr, xon,
7280 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7281 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7282 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7283 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7284 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7285 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
7286 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7287 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7288 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7289 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7290 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
7291 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7292 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7293 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7294 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7295 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7296 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7297 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7298 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7299 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7300 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
7301 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7302 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7303 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7304 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7305 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7306 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7307 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7312 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7313 # encodings used by other x86 environments. All others are invented for DJGPP.
7314 # Oddly enough, while several combinations of modifiers are tabulated, there is
7315 # none for shifted cursor keys.
7367 # Ctrl-Delete \E[43~
7368 # Ctrl-Down Arrow \E[38~
7371 # Ctrl-Insert \E[42~
7372 # Ctrl-Left Arrow \E[39~
7373 # Ctrl-Page Down \E[46~
7374 # Ctrl-Page Up \E[45~
7375 # Ctrl-Right Arrow \E[40~
7376 # Ctrl-Up Arrow \E[37~
7392 # Alt-Down Arrow \E[60~
7396 # Alt-Left Arrow \E[61~
7397 # Alt-Page Down \E[68~
7398 # Alt-Page Up \E[67~
7399 # Alt-Right Arrow \E[62~
7400 # Alt-Up Arrow \E[59~
7429 djgpp|ansi emulation for DJGPP alpha,
7430 am, bce, msgr, xhp, xon, xt,
7431 colors#8, it#8, pairs#64,
7432 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7433 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7434 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7435 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7436 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
7437 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7438 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7439 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7440 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7441 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7442 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7443 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7444 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7445 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7446 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7447 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7448 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
7449 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7450 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7451 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
7452 %p6%t;1%;%?%p7%t;8%;m,
7453 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7455 djgpp203|Entry for DJGPP 2.03,
7457 cols#80, it#8, lines#25,
7458 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
7461 djgpp204|Entry for DJGPP 2.04,
7463 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7464 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7465 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
7466 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7467 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7468 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7469 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7470 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7471 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7472 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7473 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7474 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7475 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7476 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m,
7477 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7478 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7482 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7483 # buggy. Another odd bug appears when displaying "~" in alternate character
7484 # set (the emulator spits out error messages). Compare with att6386 -TD
7485 uwin|U/Win 3.2 console,
7486 am, eo, in, msgr, xenl, xon,
7487 colors#8, it#8, ncv#58, pairs#64,
7488 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7489 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7490 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7491 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7492 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
7493 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7494 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7495 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
7496 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7497 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
7498 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
7499 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
7500 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
7501 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
7502 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7503 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
7504 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
7505 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
7507 #### Microsoft (miscellaneous)
7509 # This entry fits the Windows NT console when the _POSIX_TERM environment
7510 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
7511 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
7512 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
7513 # systems is not, and (surprise!) they match very well.
7515 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
7516 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
7517 # are the installation instructions a pile of mind-numbing bureaucratese,
7518 # but the termcap entry is actually broken and unusable as given; the :do:
7519 # capability is misspelled "d".
7521 # To use this, you need to a bunch of environment variables:
7523 # SET _POSIX_TERM=on
7525 # SET TERMCAP=location of termcap file in POSIX file format
7526 # which is case-sensitive.
7527 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
7530 # Important note: setting the TMP environment variable in POSIX style renders
7531 # it incompatible with a lot of other applications, including Visual C++. So
7532 # you should have a separate command window just for vi. All the other
7533 # variables may be permanently set in the Control Panel\System applet.
7535 # You can find out more about the restrictions of this facility at
7536 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
7538 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
7539 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
7541 cols#80, it#8, lines#25,
7542 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7543 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7544 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
7545 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
7546 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
7547 # From: jew@venus.sunquest.com
7548 # Date: 19 Feb 93 23:41:07 GMT
7549 # Here's a combination of ansi and vt100 termcap
7550 # entries that works nearly perfectly for me
7551 # (Gateway 2000 Handbook and Microsoft Works 3.0):
7552 pcmw|PC running Microsoft Works,
7554 cols#80, it#8, lines#24, vt#3,
7555 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
7556 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
7557 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
7558 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
7559 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
7560 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7561 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
7562 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
7563 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7564 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7565 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7568 # From: Federico Bianchi
7569 # This is the entry for the OpenNT terminal.
7570 # The ntconsole name is for backward compatibility.
7571 # This is for OpenNT 2.0 and later.
7572 # Later OpenNT was renamed to Interix.
7574 # Presently it is distributed by Microsoft as Services For Unix (SFU).
7575 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
7576 # the documentation dates from 1.9.9e) -TD
7578 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
7580 colors#8, cols#80, lines#25, ncv#3, pairs#64,
7581 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7582 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7583 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7584 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
7585 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
7586 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7587 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7588 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7589 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7590 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
7591 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
7592 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
7593 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
7594 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
7595 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
7596 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
7597 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
7598 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
7599 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
7600 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
7601 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
7602 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, kf63=\EF^L,
7603 kf7=\EF7, kf8=\EF8, kf9=\EF9, kich1=\E[L, kll=\E[U, knp=\E[T,
7604 kpp=\E[S, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u, rev=\E[7m,
7605 ri=\E[T, rin=\E[%p1%dT, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
7606 rmul=\E[m, rs1=\Ec, sc=\E[s, setab=\E[4%p1%dm,
7607 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%dm,
7608 setf=\E[%p1%{30}%+%dm, sgr0=\E[0m, smcup=\E[s\E[1b,
7609 smso=\E[7m, smul=\E[4m, kf64=\EF$,
7611 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
7612 lines#35, use=opennt,
7614 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
7615 lines#50, use=opennt,
7617 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
7618 lines#60, use=opennt,
7620 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
7621 lines#100, use=opennt,
7623 # OpenNT wide terminals
7624 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
7625 cols#125, use=opennt,
7627 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
7628 lines#35, use=opennt-w,
7630 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
7631 lines#50, use=opennt-w,
7633 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
7634 lines#60, use=opennt-w,
7636 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
7637 cols#132, use=opennt,
7639 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
7640 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
7641 rmcup@, smcup@, use=opennt,
7643 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
7644 lines#35, use=opennt-nti,
7646 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
7647 lines#50, use=opennt-nti,
7649 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
7650 lines#60, use=opennt-nti,
7652 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
7653 lines#100, use=opennt-nti,
7655 ######## COMMON TERMINAL TYPES
7657 # This section describes terminal classes and maker brands that are still
7658 # quite common, but have proprietary command sets not blessed by ANSI.
7663 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7664 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7665 # Acer has a web site at http://www.acer.com.
7667 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7668 # His comments suggest they were shipped with the system.
7671 # (altos2: had extension capabilities
7672 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7673 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7674 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7675 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7676 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7677 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7678 # :HL=^AP\r:SP=\E[i:\
7679 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7680 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7681 # Comparison with the k* capabilities makes it obvious that the c* things are
7682 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7683 # :sr: was given as a boolean-- esr)
7684 altos2|alt2|altos-2|altos II,
7685 cols#80, it#8, lines#24, xmc#0,
7686 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7687 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7688 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7689 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
7690 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7691 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7692 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7693 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7694 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7695 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7696 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7697 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7698 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7699 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7700 # (altos3: had extension capabilities
7701 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7702 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7703 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7704 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7705 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7706 # :HL=^AP\r:SP=\E[i:\
7707 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7708 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7709 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7710 altos4|alt4|altos-4|altos IV,
7712 # (altos7: had extension capabilities:
7713 # :GG#0:GI=\EH8:GF=\EH7:\
7714 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7715 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7716 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7717 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7718 # Comparison with the k* capabilities makes it obvious that the c* things are
7719 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7720 # also made this entry relative to adm12 in order to give it an <sgr>. The
7721 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7722 altos7|alt7|altos VII,
7724 cols#80, lines#24, xmc#0,
7725 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7726 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
7727 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7728 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7730 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7731 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7732 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7733 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7734 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7735 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7736 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7737 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7738 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
7739 rmir=\Er, smir=\Eq, use=adm+sgr,
7740 altos7pc|alt7pc|altos PC VII,
7741 kend=\ET, use=altos7,
7743 #### Hewlett-Packard (hp)
7746 # 8000 Foothills Blvd
7747 # Roseville, CA 95747
7748 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7749 # 1-(800)-633-3600 (General customer support)
7752 # As of March 1998, HP no longer has any terminals in production.
7753 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7754 # supported (they still have parts). So are the 2392a and 2394a.
7755 # See the WORKSTATION CONSOLES section for the 700s.
7758 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7759 hpgeneric|hp|hewlett-packard generic terminal,
7760 OTbs, OTpt, am, da, db, mir, xhp,
7761 cols#80, lines#24, lm#0, vt#6,
7762 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7763 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7764 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7765 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7766 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7769 hp110|hewlett-packard model 110 portable,
7770 lines#16, use=hpgeneric,
7772 hp+pfk+cr|hp function keys with CR,
7773 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7774 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7776 hp+pfk-cr|hp function keys w/o CR,
7777 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7780 # The hp2621s use the same keys for the arrows and function keys,
7781 # but not separate escape sequences. These definitions allow the
7782 # user to use those keys as arrow keys rather than as function
7784 hp+pfk+arrows|hp alternate arrow definitions,
7785 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7786 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7787 kll=\Eq\r, kri=\Es\r,
7789 hp+arrows|hp arrow definitions,
7790 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7791 kind=\ES, kll=\EF, kri=\ET,
7793 # Generic stuff from the HP 262x series
7795 hp262x|HP 262x terminals,
7797 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7798 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7799 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7800 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7801 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7802 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
7803 %;%?%p4%t%{65}%|%;%c,
7804 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7806 # Note: no <home> on HPs since that homes to top of memory, not screen.
7807 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7808 # transmit anything at all is to turn on the function key labels
7809 # with <smkx>, and even then the user has to hold down shift!
7810 # The default 2621 turns off the labels except when it has to to
7811 # enable the function keys. If your installation prefers labels
7812 # on all the time, or off all the time (at the "expense" of the
7813 # function keys), use 2621-nl or 2621-wl.
7815 # Note: there are newer ROMs for 2621's that allow you to set
7816 # strap A so the regular arrow keys xmit \EA, etc, as with the
7817 # 2645. However, even with this strap set, the terminal stops
7818 # xmitting if you reset it, until you unset and reset the strap!
7819 # Since there is no way to set/unset the strap with an escape
7820 # sequence, we don't use it in the default.
7821 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7822 hp2621-ba|2621 w/new rom and strap A set,
7823 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7825 # hp2621 with function labels. Most of the time they are off,
7826 # but inside vi, the function key labels appear. You have to
7827 # hold down shift to get them to xmit.
7828 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7829 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7833 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7834 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7835 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7836 use=hp+pfk+cr, use=hpgeneric,
7838 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7839 hp2621p|hp 2621 with printer,
7840 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7842 hp2621p-a|hp2621p with fn as arrows,
7843 use=hp+pfk+arrows, use=hp2621p,
7845 # hp2621 with k45 keyboard
7846 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7847 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7848 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7850 # 2621 using all 48 lines of memory, only 24 visible at any time.
7851 hp2621-48|48 line 2621,
7853 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7856 # 2621 with no labels ever. Also prevents vi delays on escape.
7857 hp2621-nl|hp 2621 with no labels,
7858 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7861 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7864 hp2621-nt|hp 2621 w/no tabs,
7867 # Hp 2624 B with 4 or 10 pages of memory.
7869 # Some assumptions are made with this entry. These settings are
7870 # NOT set up by the initialization strings.
7872 # Port Configuration
7877 # Terminal Configuration
7883 # Note: the 2624 DOES have a true <home>, believe it or not!
7885 # The 2624 has an "error line" to which messages can be sent.
7886 # This is CLOSE to what is expected for a "status line". However,
7887 # after a message is sent to the "error line", the next carriage
7888 # return is EATEN and the "error line" is turned back off again!
7889 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7891 # This entry supports emacs (and any other program that uses raw
7892 # mode) at 4800 baud and less. I couldn't get the padding right
7895 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7896 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7899 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
7901 # This hp2626 entry does not use any of the fancy windowing stuff
7904 # Indeed, terminfo does not yet handle such stuff. Since changing
7905 # any window clears memory, it is probably not possible to use
7906 # this for screen opt.
7908 # ed is incredibly slow most of the time - I am guessing at the
7909 # exact padding. Since the terminal uses xoff/xon this is intended
7910 # only for cost computation, so that the terminal will prefer el
7911 # or even dl1 which is probably faster!
7913 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7914 # extra slow on the last line of the window.
7916 # The padding probably should be changed.
7918 hp2626|hp2626a|hp2626p|hp 2626,
7921 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7922 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7923 use=hp+labels, use=scrhp,
7925 # This entry is for sysline. It allocates a 23 line window with
7926 # a 115 line workspace for regular use, and a 1 line window for
7929 # This assumes port 2 is being used.
7930 # Turn off horizontal line, Create ws #1 with 115 lines,
7931 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7932 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7933 # Note that this clears the tabs so it must be done by tset before
7936 hp2626-s|hp 2626 using only 23 lines,
7939 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7940 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
7941 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
7942 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7943 # Force terminal back to 24 lines after being 23.
7944 hp2626-ns|hp 2626 using all 24 lines,
7945 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
7946 \s\E&w3f2I\s\E&w7f2p1I\s\r,
7948 # Various entries useful for small windows on 2626.
7949 hp2626-12|hewlett-packard 2626 12 lines,
7950 lines#12, use=hp2626,
7951 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7952 cols#40, lines#12, use=hp2626,
7953 hp2626-x40|hewlett-packard 2626 40 columns,
7954 cols#40, use=hp2626,
7955 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7956 lines#11, use=hp2626-s,
7959 # hp2627 color tubes from University of Wisconsin
7961 hp2627a-rev|hp 2627 with reverse video colors,
7962 cr=\r, cud1=\n, ht=^I, ind=\n,
7963 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
7965 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
7966 smul=\E&dD\E&v1S, use=hp2621-nl,
7967 hp2627a|hp 2627 color terminal with no labels,
7968 cr=\r, cud1=\n, ht=^I, ind=\n,
7969 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7970 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
7971 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7973 hp2627c|hp 2627 color (cyan) terminal with no labels,
7974 cr=\r, cud1=\n, ht=^I, ind=\n,
7975 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7976 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
7978 # hp2640a doesn't have the Y cursor addressing feature, and C is
7979 # memory relative instead of screen relative, as we need.
7982 cup@, rmkx@, smkx@, use=hp2645,
7984 hp2640b|hp2644a|hp 264x series,
7985 rmkx@, smkx@, use=hp2645,
7987 # (hp2641a: removed unknown :gu: -- esr)
7988 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7989 am, da, db, mir, xhp,
7991 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7992 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7993 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7994 if=/usr/share/tabset/std, il1=\EL, ind=\n,
7995 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7996 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7999 # This terminal should be used at 4800 baud or less. It needs padding for
8000 # plain characters at 9600, I guessed at an appropriate cr delay. It really
8001 # wants ^E/^F handshaking, but that doesn't work well even if you write
8002 # software to support it.
8003 hp2645|hp45|HP 2645 series,
8005 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
8006 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8007 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
8008 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
8010 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8011 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
8012 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
8013 # You should use this terminal at 4800 baud or less.
8014 hp2648|hp2648a|HP 2648a graphics terminal,
8015 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
8016 dch1=\EP$<7>, ip=$<5>, use=hp2645,
8018 # The HP 150 terminal is a fairly vanilla HP terminal, with the
8019 # clreol standout problem. It also has graphics capabilities and
8020 # a touch screen, which we don't describe here.
8021 hp150|hewlett packard Model 150,
8024 # HP 2382a terminals, "the little ones." They don't have any
8025 # alternate character set support and sending out ^N/^O will
8026 # leave the screen blank.
8027 hp2382a|hp2382|hewlett packard 2382a,
8031 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8034 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8035 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8036 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8038 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8040 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8041 use=hp+pfk+arrows, use=hp2621-fl,
8043 # newer hewlett packard terminals
8045 newhpkeyboard|generic entry for HP extended keyboard,
8046 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8047 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8048 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8049 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8052 newhp|generic entry for new hewlett packard terminals,
8053 am, bw, mir, xhp, xon,
8054 cols#80, lines#24, pb#4800,
8055 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8057 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
8058 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8059 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
8060 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
8061 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8062 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8063 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8064 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8065 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8066 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8067 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8068 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8069 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8070 tbc=\E3, use=newhpkeyboard,
8072 memhp|memory relative addressing for new HP ttys,
8074 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8075 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8076 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8077 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8079 scrhp|screen relative addressing for new HP ttys,
8080 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8081 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8082 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8083 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8084 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8086 # (hp+labels: added label values from a BRL termcap -- esr)
8087 hp+labels|"standard" label info for new HP ttys,
8089 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8090 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8092 rmln=\E&j@, smln=\E&jB,
8094 hp+printer|"standard" printer info for HP ttys,
8095 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8098 # The new hp2621b is kind of a cross between the old 2621 and the
8099 # new 262x series of machines. It has dip-switched options.
8100 # The firmware has a bug in it such that if you give it a null
8101 # length label, the following character is eaten!
8102 hp2621b|hp 2621b with old style keyboard,
8103 lh#1, lm#48, lw#8, nlab#8,
8104 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8105 kind=\ET, kll=\EF, kri=\ES,
8106 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8107 %;%p2%s\E%{111}%p1%+%c\r,
8108 smln=\E&jB, use=hp2621,
8110 hp2621b-p|hp 2621b with printer,
8111 use=hp+printer, use=hp2621b,
8113 # hp2621b - new 2621b with new extended keyboard
8114 # these are closer to the new 26xx series than the other 2621b
8115 hp2621b-kx|hp 2621b with extended keyboard,
8116 use=newhpkeyboard, use=hp2621b,
8118 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8119 use=hp+printer, use=hp2621b-kx,
8121 # Some assumptions are made in the following entries.
8122 # These settings are NOT set up by the initialization strings.
8124 # Port Configuration
8125 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8127 # Terminal Configuration
8128 # InhHndShk(G)=Yes InhDC2(H)=Yes
8129 # XmitFnctn(A)=No InhEolWrp=No
8132 # Hp 2622a & hp2623a display and graphics terminals
8134 hp2622|hp2622a|hp 2622,
8137 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8139 # The 2623 is a 2622 with extra graphics hardware.
8140 hp2623|hp2623a|hp 2623,
8143 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8144 use=hp+printer, use=hp2624,
8146 # The hewlett packard B can have an optional extra 6 pages of memory.
8147 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8150 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8151 lm#240, use=hp2624b-p,
8153 # Color manipulations for HP terminals
8154 hp+color|hp with colors,
8156 colors#16, ncv#17, pairs#7,
8157 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8158 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8159 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8160 %t1%e.%p7%d%;z%p1%dI,
8161 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8162 I\E&v1b1c6I\E&v1x1y7I,
8163 op=\E&v0S, scp=\E&v%p1%dS,
8165 # <is2> sets the screen to be 80 columns wide
8166 hp2397a|hp2397|hewlett packard 2397A color terminal,
8167 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8169 # HP 700/44 Setup parameters:
8170 # Terminal Mode HP-PCterm
8171 # Inhibit Auto Wrap NO
8172 # Status Line Host Writable
8173 # PC Character Set YES
8174 # Twenty-Five Line Mode YES
8175 # XON/XOFF @128 or 64 (sc)
8176 # Keycode Mode NO or YES (sc)
8177 # Backspace Key BS or BS/DEL
8179 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8180 # \E\\? does not turn off keycode mode
8181 # <smsc> sets alternate start/stop; keycode on
8182 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8185 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8187 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8188 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8189 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8190 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8192 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8193 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8194 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8195 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8196 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8197 kpp=\E[5~, rmam=\E[?7l,
8198 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8199 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8200 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8201 smul=\E[4m, xoffc=g, xonc=e,
8203 # (hp2392: copied <rmir> here from hpex -- esr)
8206 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8207 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8208 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8209 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8212 hpsub|hp terminals -- capability subset,
8213 am, da, db, mir, xhp, xon,
8215 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8216 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8217 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
8218 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8219 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8220 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8223 # May be used for most 24 x 80 hp terminals,
8224 # but has no padding added, so may allow runover in some terminals at high
8225 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8226 # hp98x5 terminal emulators or hp98x6 consoles.
8227 # Adds xy-cursor addressing, vertical cursor addressing, home,
8228 # last line, and underline capabilities.
8230 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8231 # moved <rmir> here from hpsub -- esr)
8232 hpex|hp extended capabilities,
8233 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
8234 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
8235 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8237 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8238 hp2|hpex2|hewlett-packard extended capabilities newer version,
8239 am, da, db, mir, xhp,
8240 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8241 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8242 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8243 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8244 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8245 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8246 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8247 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8248 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8249 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8250 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8251 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8252 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8253 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8254 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8255 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8256 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8257 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
8258 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8261 # From: <ddavis@ic.berkeley.edu>
8262 hp236|hp236 internal terminal emulator,
8265 clear=\EF, cnorm=\EDE, cub1=^H,
8266 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8267 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8268 sgr0=\ECI, smso=\EBI,
8270 # This works on a hp300 console running Utah 4.3 BSD
8271 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8272 hp300h|HP Catseye console,
8273 OTbs, am, da, db, mir, xhp,
8274 cols#128, lines#51, lm#0, xmc#0,
8275 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8276 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8277 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8278 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
8279 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8280 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8281 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8283 # From: Greg Couch <gregc@ernie.berkeley.edu>
8284 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8285 OTbs, am, da, db, mir, xhp,
8286 cols#128, it#8, lines#46, lm#0,
8287 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8288 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8289 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8290 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8291 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8292 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8293 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8294 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8295 tbc=\E3, vpa=\E&a%p1%dY,
8296 # HP 9845 desktop computer from BRL
8297 # (hp9845: removed unknown capability :gu: -- esr)
8299 OTbs, am, da, db, eo, mir, xhp,
8301 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8302 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8303 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
8304 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8305 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
8306 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
8307 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
8308 hp98550|hp98550a|HP 9000 Series 300 color console,
8309 OTbs, am, da, db, mir, xhp,
8310 cols#128, it#8, lines#49, lm#0,
8311 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
8312 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8313 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
8314 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8315 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
8316 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8317 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
8318 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
8319 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
8320 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
8321 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8322 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
8323 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8324 # From: Victor Duchovni <vic@fine.princeton.edu>
8325 # (hp700-wy: removed obsolete ":nl=^J:";
8326 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
8327 hp700-wy|HP700/41 emulating wyse30,
8328 OTbs, am, bw, mir, msgr,
8329 cols#80, it#8, lines#24, xmc#1,
8330 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
8331 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8332 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
8333 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
8334 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
8335 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
8336 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
8337 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
8338 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
8339 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
8340 hp70092|hp70092a|hp70092A|HP 700/92,
8342 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
8343 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
8344 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
8345 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
8346 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8347 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8348 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8349 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8350 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8351 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8352 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
8353 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8354 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8355 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8357 bobcat|sbobcat|HP 9000 model 300 console,
8358 am, da, db, mir, xhp,
8359 cols#128, it#8, lines#47, xmc#0,
8360 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8361 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
8362 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
8363 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
8364 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
8365 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
8366 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
8367 gator-t|HP 9000 model 237 emulating extra-tall AAA,
8368 lines#94, use=gator,
8369 gator|HP 9000 model 237 emulating AAA,
8371 cols#128, it#8, lines#47,
8372 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
8373 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
8374 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
8375 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
8376 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
8377 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8378 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
8379 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8380 gator-52|HP 9000 model 237 emulating VT52,
8381 cols#128, lines#47, use=vt52,
8382 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
8383 lines#94, use=gator-52,
8387 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
8390 # Honeywell Bull terminal. Its cursor and function keys send single
8391 # control characters and it has standout/underline glitch. Most programs
8392 # do not like these features/bugs. Visual bell is realized by flashing the
8393 # "keyboard locked" LED.
8394 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
8396 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
8397 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
8398 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
8399 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
8400 dku7003|Honeywell Bull DKU 7003 all features described,
8403 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
8404 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8407 #### Lear-Siegler (adm)
8409 # These guys are long since out of the terminals business, but
8410 # in 1995 many current terminals still have an adm type as one of their
8411 # emulations (usually their stupidest, and usually labeled adm3, though
8412 # these `adm3' emulations normally have adm3a+ capabilities).
8414 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
8415 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
8416 # was being held to ground would trigger a send of the top line on the screen.
8417 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
8418 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
8419 # for clearing up this point.)
8421 adm1a|adm1|lsi adm1a,
8424 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8425 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
8430 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8431 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8432 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
8433 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8434 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8438 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
8439 # The following ADM-3A switch settings are assumed for normal operation:
8440 # SPACE U/L_DISP CLR_SCRN 24_LINE
8441 # CUR_CTL LC_EN AUTO_NL FDX
8442 # Other switches may be set for operator convenience or communication
8443 # requirements. I recommend
8444 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8446 # Most of these terminals required an option ROM to support lower case display.
8447 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8448 # socket, you may be out of luck.
8450 # (adm3a: some capabilities merged in from BRl entry -- esr)
8454 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
8455 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8456 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
8460 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8463 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
8464 rmso=\EG, smso=\EG, use=adm3a+,
8465 # A lot of terminals other than adm11s use these. Wherever you see
8466 # use=adm+sgr with some of its capabilities disabled, try the
8467 # disabled ones. They may well work but not have been documented or
8468 # expressed in the using entry. We'd like to cook up an <sgr> but the
8469 # <rmacs>/<smacs> sequences of the using entries vary too much.
8470 adm+sgr|adm style highlight capabilities,
8471 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8472 smso=\EG4, smul=\EG8,
8473 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8474 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8475 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8476 # be ^Z, according to his entry.
8477 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8478 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8481 OTkn#8, cols#80, lines#24,
8482 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
8483 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8484 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
8485 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8486 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8487 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
8489 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
8490 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
8491 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
8492 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
8493 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
8494 # via BRL. That entry asserted <xmc#1>, but I've left that out because
8495 # neither earlier nor later ADMSs have it -- esr)
8497 # You will need to get into the supervisor setup before you can set
8498 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
8499 # see a lot more setup options.
8501 # While in supervisor setup you can also use following codes:
8503 # Ctrl-P Personality character selections (configure for example what
8504 # arrow keys send, if I recall correctly)
8505 # Ctrl-T tabs 1-80 use left&right to move and up to set and
8506 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
8507 # Ctrl-B Binary setup (probably not needed. I think that everything can
8508 # be set using normal setup)
8509 # Ctrl-A Answerback mode (enter answerback message)
8510 # Ctrl-U User friendly mode (normal setup)
8511 # Ctrl-D Defaults entire setup and function keys from EPROM tables
8512 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
8513 # Ctrl-R Reads both setup and functions keys from NVM.
8514 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
8516 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
8517 # RTS/CTS used nowadays with virtually every modem and computer. 19200
8518 # bps works fine with hardware flow control.
8520 # The following null-modem cable should fix this and enable you to use
8521 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
8522 # set ADM-12+ for DTR handshaking from supervisor setup.
8535 OTbs, OTpt, am, mir,
8536 OTug#1, cols#80, it#8, lines#24,
8537 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8538 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8539 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
8540 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
8541 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
8542 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
8543 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8544 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8545 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
8547 # (adm20: removed obsolete ":kn#7:" -- esr)
8548 adm20|lear siegler adm20,
8550 cols#80, it#8, lines#24,
8551 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
8552 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
8553 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
8554 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
8556 adm21|lear siegler adm21,
8558 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
8559 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
8560 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8561 use=adm+sgr, use=adm3a,
8562 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
8563 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
8564 # removed bogus-looking \200 from before <cup>. -- esr)
8568 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8569 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8570 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
8571 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
8573 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8574 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8575 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
8576 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
8577 # ADM 31 DIP Switches
8579 # This information comes from two versions of the manual for the
8580 # Lear-Siegler ADM 31.
8584 # +-||||-------------------------------------+
8599 # +----------------------------------------------+
8600 # front of case (keyboard)
8602 # S1 - Data Rate - Modem
8603 # S2 - Data Rate - Printer
8604 # ------------------------
8606 # -------------------
8624 # S3 - Interface/Printer/Attributes
8625 # ---------------------------------
8626 # Printer Busy Control
8629 # off off off Busy not active, CD disabled
8630 # off off on Busy not active, CD enabled
8631 # off on off Busy active on J5-20, CD disabled
8632 # on off off Busy active on J5-19, CD disabled - Factory Set.
8633 # on off on Busy active on J5-19, CD enabled
8635 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
8637 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
8639 # sw6 ON enables printer BUSY active LOW - Factory Setting
8640 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
8642 # sw7 ON - steady cursor - Factory Setting
8643 # OFF - blinking cursor
8645 # sw8 ON causes selected attribute character to be displayed
8646 # OFF causes SPACE to be displayed instead - Factory Setting
8652 # sw4 sw1 sw2 sw3 sw4
8653 # ---------------------------
8654 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
8655 # Current Loop disabled - Factory Setting
8656 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
8658 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
8659 # Current Loop Disabled
8661 # sw5 ON disables dot stretching mode - Factory Setting
8662 # OFF enables dot stretching mode
8663 # sw6 ON enables blanking function
8664 # OFF enables underline function - Factory Setting
8665 # sw7 ON causes NULLS to be displayed as NULLS
8666 # OFF causes NULLS to be displayed as SPACES - Factory Setting
8668 # S5 - Word Structure
8669 # -------------------
8670 # sw1 ON enables BREAK key - Factory Setting
8671 # OFF disables BREAK key
8672 # sw2 ON selects 50Hz monitor refresh rate
8673 # OFF selects 60Hz monitor refresh rate - Factory Setting
8675 # Modem Port Selection
8678 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
8679 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
8680 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
8681 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
8682 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
8683 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8684 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8685 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8687 # sw6 ON sends bit 8 a 1 (mark)
8688 # OFF sends bit 8 as 0 (space) - Factory Setting
8689 # sw7 ON selects Block Mode
8690 # OFF selects Conversation Mode - Factory Setting
8691 # sw8 ON selects Full Duplex operation
8692 # OFF selects Half Duplex operation - Factory Setting
8696 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8698 # Printer Port Selection
8699 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8701 # sw8 ON enables Printer Port
8702 # OFF disables Printer Port - Factory Setting
8704 # S7 - Polling Address
8705 # --------------------
8706 # sw1-7 Establish ASCII character which designates terminal polling address
8708 # OFF = logic 1 - Factory Setting
8709 # sw8 ON enables Polling Option
8710 # OFF disables Polling Option - Factory Setting
8713 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8715 # This adm31 entry uses underline as the standout mode.
8716 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8717 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8718 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8719 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8720 adm31|lsi adm31 with sw6 set for underline mode,
8723 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8724 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8725 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
8726 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8727 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8728 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8729 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8730 adm31-old|o31|old adm31,
8731 rmul@, smso=\EG4, smul@, use=adm31,
8732 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8736 if=/usr/share/tabset/vt100,
8737 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
8738 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8742 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8743 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8744 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8745 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
8746 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
8747 smir=\Eq, smul@, use=adm+sgr,
8748 # The following termcap for the Lear Siegler ADM-42 leaves the
8749 # "system line" at the bottom of the screen blank (for those who
8750 # find it distracting otherwise)
8751 adm42-ns|lsi adm-42 with no system line,
8752 cbt=\EI\EF \011, clear=\E;\EF \011,
8753 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8754 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8755 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8756 smir=\Eq\EF \011, use=adm42,
8757 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8758 # The insert mode of this terminal is commented out because it's broken for our
8759 # purposes in that it will shift the position of every character on the page,
8760 # not just the cursor line!
8761 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8762 adm1178|1178|lsi adm1178,
8764 cols#80, lines#24, xmc#1,
8765 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
8766 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8767 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8768 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
8769 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
8770 sgr0=\E), smso=\EG4, smul=\EG1,
8774 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8775 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8776 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8778 # ComputerVision Services
8779 # 500 Old Connecticut Path
8783 # Standout mode is dim reverse-video.
8784 pt100|pt200|wren|fenix|prime pt100/pt200,
8786 cols#80, it#8, lines#24,
8787 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
8788 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8789 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8790 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8791 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8792 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
8793 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
8794 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8796 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
8798 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8799 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8801 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8803 rmso@, smso@, use=pt100,
8804 pt250w|Prime PT250 in 132-column mode,
8805 rmso@, smso@, use=pt100w,
8810 # 3475-A North 1st Street
8812 # Vox: (800)-457-4447
8813 # Fax: (408)-473-1510
8814 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8816 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8817 # group and production division.
8819 # Discontinued Qume models:
8821 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8822 # built to replace them, and a qvt119+ which was a 101+ with available wide
8823 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8824 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8825 # ANSI-compatible terminals with the qvt323 and qvt61.
8827 # Current Qume models (as of February 1995):
8829 # All current Qume terminals have ANSI-compatible operation modes.
8830 # Qume is still producing the qvt62, which features emulations for other
8831 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8832 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8833 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8834 # model is the qvt520, which is vt420-compatible.
8836 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8838 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8839 # setup mode. Shift-s should be a configuration save to NVRAM.
8841 qvt101|qvt108|qume qvt 101 and QVT 108,
8844 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8845 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8846 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8847 # What seems to be going on here is that this entry was designed so that
8848 # the normal highlight is bold and standout is dim plus something else
8849 # (reverse-video maybe? But then, are there two <rev> sequences?)
8851 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8852 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8853 qvt101+|qvt101p|qume qvt 101 PLUS product,
8855 cols#80, lines#24, xmc#0,
8856 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
8857 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8858 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8859 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
8860 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8861 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8862 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8863 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8864 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8865 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8866 qvt102|qume qvt 102,
8867 cnorm=\E., use=qvt101,
8868 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8869 qvt103|qume qvt 103,
8871 cols#80, it#8, lines#24, vt#3,
8872 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8873 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
8874 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
8875 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8876 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8877 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8878 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8879 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8880 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8881 rmso=\E[m$<2>, rmul=\E[m$<2>,
8882 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8883 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
8885 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8886 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8887 qvt103-w|qume qvt103 132 cols,
8889 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8890 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8892 cols#80, lines#24, xmc#0,
8893 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
8894 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8895 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8896 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
8897 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
8898 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8899 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8900 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8901 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8902 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8903 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8904 lines#25, use=qvt119+,
8905 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8907 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8908 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8909 lines#25, use=qvt119+,
8910 qvt203|qvt203+|qume qvt 203 Plus,
8911 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8912 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8913 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8914 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8915 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8917 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8919 # Since a command is present for enabling 25 data lines,
8920 # a specific terminfo entry may be generated for the 203.
8921 # If one is desired for the QVT 119 PLUS then 25 lines must
8922 # be selected in the status line (setup line 9).
8924 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8926 is2=\E[=40h\E[?3l, use=qvt203,
8927 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8929 rs2=\E[?3h\E[=40h, use=qvt203,
8931 #### Televideo (tvi)
8934 # 550 East Brokaw Road
8935 # PO Box 49048 95161
8937 # Vox: (408)-954-8333
8938 # Fax: (408)-954-0623
8941 # These require incredible amounts of padding.
8943 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8944 # Televideo terminals are ANSI and PC-ANSI compatible.
8946 tvi803|televideo 803,
8947 clear=\E*$<10>, use=tvi950,
8949 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8950 # Switch settings are:
8971 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8987 # U do CR/LF when CR received
8988 # D do CR when CR received
9010 # S2 6 Cursor down key
9014 # S2 7 Screen colour
9018 # S2 8 DSR status (pin 6)
9022 # S2 9 DCD status (pin 8)
9026 # S2 10 DTR status (pin 20)
9029 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
9030 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
9031 tvi910|televideo model 910,
9033 cols#80, it#8, lines#24, xmc#1,
9034 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9035 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9036 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
9037 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
9038 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9039 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9040 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9041 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9042 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9043 # as subsequently hacked over by someone at SCO
9044 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9046 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9049 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9050 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9051 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9052 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9055 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9056 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9057 # D U D D 8O1 D U U U 8E2
9059 # S1 9 Autowrap (U = on, D = off)
9060 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9061 # S2 1 Mode (U = block, D = conversational)
9062 # S2 2 Duplex (U = half, D = full)
9063 # S2 3 Hertz (U = 50, D = 60)
9064 # S2 4 Edit mode (U = local, D = duplex)
9065 # S2 5 Cursor type (U = underline, D = block)
9066 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9067 # S2 7 Screen colour (U = green on black, D = black on green)
9068 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9069 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9070 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9072 tvi910+|televideo 910+,
9073 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9074 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9075 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9076 ll=\E=7\s, use=tvi910,
9078 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9079 # <khome> from BRL entry -- esr)
9080 tvi912|tvi914|tvi920|old televideo 912/914/920,
9081 OTbs, OTpt, am, msgr,
9082 cols#80, it#8, lines#24, xmc#1,
9083 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9084 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9085 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9086 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9087 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
9088 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9089 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9090 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9092 # We got some new tvi912c terminals that act really weird on the regular
9093 # termcap, so one of our gurus worked this up. Seems that cursor
9094 # addressing is broken.
9095 tvi912cc|tvi912 at cowell college,
9098 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9099 # From: Benjamin C. W. Sittler
9101 # Someone has put a scanned copy of the manual online at:
9102 # http://vt100.net/televideo/912b-om/
9104 # These terminals were produced ca. 1979, and had a 12" monochrome
9105 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9106 # ASCII, and were generally similar to adm3a but with attributes
9107 # (including some with magic cookies), fancy half-duplex mode, and
9110 # Some operations require truly incredible amounts of padding. The
9111 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9112 # are so slow as to be nearly unusable.
9114 # There may or may not have been a separate, earlier series of 912/920
9115 # terminals (without the "B" and "C" suffix); I have never seen one,
9116 # and the manual only describes the "B" and "C" series. The 912 and 920
9117 # are quite distinct from the 914 and 924, which were much nicer non-
9118 # magic-cookie terminals similar to the 950.
9120 # This is a new description for the following TeleVideo terminals,
9121 # distinguished chiefly by their keyboards:
9123 # TVI-912B - very odd layout, no function keys (84 keys)
9124 # TVI-920B - typewriter layout, no function keys (103 keys)
9125 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9126 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9128 # To choose a setting for the TERM variable, start with the model:
9130 # Model || base name
9131 # ----------||-----------
9132 # TVI-912B || tvi912b
9133 # TVI-912C || tvi912c
9134 # TVI-920B || tvi920b
9135 # TVI-920C || tvi920c
9137 # Then add a suffix from the following table describing installed options
9138 # and how you'd like to use the terminal:
9140 # Use Video | Second | Visual | Magic | Page || feature
9141 # Attributes | Page | Bell | Cookies | Print || suffix
9142 # ------------|--------|--------|---------|-------||---------
9143 # No | No | N/A | N/A | No || -unk
9144 # No | No | N/A | N/A | Yes || -p
9145 # No | Yes | No | N/A | No || -2p-unk
9146 # No | Yes | No | N/A | Yes || -2p-p
9147 # No | Yes | Yes | N/A | No || -vb-unk
9148 # No | Yes | Yes | N/A | Yes || -vb-p
9149 # Yes | No | N/A | No | N/A ||
9150 # Yes | No | N/A | Yes | N/A || -mc
9151 # Yes | Yes | No | No | N/A || -2p
9152 # Yes | Yes | No | Yes | N/A || -2p-mc
9153 # Yes | Yes | Yes | No | N/A || -vb
9154 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9156 # So e.g. a model 920 C with second page memory option, visual bell
9157 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9158 # second page memory option and using magic cookies would be
9163 # At 9600 baud, the terminal is prone to overflow its input buffer
9164 # during complex operations (insert/delete
9165 # character/line/screen/page), and it does not signal this over the
9166 # RS232 cable. The typical symptom of an overrun is that the terminal
9167 # starts beeping, and output becomes garbled.
9169 # The padding delays in this terminfo were derived using tack(1)
9170 # running on a Linux box connected to a TVI-920C with a later-model
9171 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9172 # vary. The numbers below seem to give the terminal enough time so
9173 # that it doesn't overflow its input buffer and start losing
9178 # If you want to use the FUNCT key on a tvi912[bc], use the
9179 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9180 # the following table (these also work on the 920 series):
9182 # Unshifted Function Keys:
9184 # Key | capname|| Equivalent
9185 # -----|--------||------------
9186 # F1 | <kf1> || FUNCT + @
9187 # F2 | <kf2> || FUNCT + A
9188 # F3 | <kf3> || FUNCT + B
9189 # F4 | <kf4> || FUNCT + C
9190 # F5 | <kf5> || FUNCT + D
9191 # F6 | <kf6> || FUNCT + E
9192 # F7 | <kf7> || FUNCT + F
9193 # F8 | <kf8> || FUNCT + G
9194 # F9 | <kf9> || FUNCT + H
9195 # F10 | <kf10> || FUNCT + I
9196 # F11 | <kf11> || FUNCT + J
9198 # Shifted Function Keys:
9200 # SHIFT + Key | capname|| Equivalent
9201 # -------------|--------||------------
9202 # SHIFT + F1 | <kf12> || FUNCT + `
9203 # SHIFT + F2 | <kf13> || FUNCT + a
9204 # SHIFT + F3 | <kf14> || FUNCT + b
9205 # SHIFT + F4 | <kf15> || FUNCT + c
9206 # SHIFT + F5 | <kf16> || FUNCT + d
9207 # SHIFT + F6 | <kf17> || FUNCT + e
9208 # SHIFT + F7 | <kf18> || FUNCT + f
9209 # SHIFT + F8 | <kf19> || FUNCT + g
9210 # SHIFT + F9 | <kf20> || FUNCT + h
9211 # SHIFT + F10 | <kf21> || FUNCT + i
9212 # SHIFT + F11 | <kf22> || FUNCT + j
9214 # PORTS AND SWITCH SETTINGS
9216 # Here are the switch settings for the TVI-912B/TVI-920B and
9217 # TVI-912C/TVI-920C:
9219 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9220 # 2: 9600 3: 4800 4: 2400 5: 1200
9221 # 6: 600 7: 300 8: 150 9: 75
9224 # S2 UART/Terminal options:
9226 # 1: Not used Not allowed
9227 # 2: Alternate character set Standard character set
9228 # 3: Full duplex Half duplex
9229 # 4: 50 Hz refresh 60 Hz refresh
9230 # 5: No parity Send parity
9231 # 6: 2 stop bits 1 stop bit
9232 # 7: 8 data bits 7 data bits
9233 # 8: Not used Not allowed on Rev E or lower
9234 # 9: Even parity Odd parity
9235 # 10: Steady cursor Blinking cursor
9236 # (On Rev E or lower, use W25 instead of switch 10.)
9238 # S5 UART/Terminal options:
9240 # 1: P3-6 Not connected DSR received on P3-6
9241 # 2: P3-8 Not connected DCD received on P3-8
9243 # 3 Open, 4 Open: P3-20 Not connected
9244 # 3 Open, 4 Closed: DTR on when terminal is on
9245 # 3 Closed, 4 Open: DTR is connected to RTS
9246 # 3 Closed, 4 Closed: Not allowed
9248 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9249 # all data transmitted out of the modem port (P3) will also be
9250 # transmitted out of the printer port (P4).
9252 # 6 Open, 7 Open: Not allowed
9253 # 6 Open, 7 Closed: 20ma current loop input
9254 # 6 Closed, 7 Open: RS232 input
9255 # 6 Closed, 7 Closed: Not allowed
9258 # If the jumper is installed, the effect will occur (the next time the terminal
9261 # S4/W31: Enables automatic LF upon receipt of CR from
9262 # remote or keyboard.
9263 # S4/W32: Enables transmission of EOT at the end of Send. If not
9264 # installed, a carriage return is sent.
9265 # S4/W33: Disables automatic carriage return in column 80.
9266 # S4/W34: Selects Page Print Mode as initial condition. If not
9267 # installed, Extension Mode is selected.
9269 # NON-STANDARD CAPABILITIES
9271 # Sending <u9> or <u7> returns a cursor position report in the format
9272 # YX\r, where Y and X are as in <cup>. This format is described in
9273 # <u8> and <u6>, but it's not clear how one should write an
9274 # appropriate scanf string, since we need to subtract %' ' from the
9275 # character after reading it. The <u9> capability is used by tack(1)
9276 # to synchronize during padding tests, and seems to work for that
9279 # This description also includes the obsolete termcap capabilities
9280 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9282 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9284 # The FUNCT modifier actually works with every normal key by sending
9285 # ^AX\r, where X is the sequence normally sent by that key. This is a
9286 # sort of meta key not currently describable in terminfo.
9288 # There are quite a few other keys (especially on the 920 models,) but
9289 # they are for the most part only useful in block mode.
9291 # These terminals have lots of forms manipulation features, mainly
9292 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9293 # spaces"; nulls are sentinels for "send X" operations); "send X"
9294 # operations for uploading all or part of the screen; and block-mode
9295 # editing keys (they don't send escape sequences, but manipulate video
9296 # memory directly). Block mode is used for local editing, and protect
9297 # mode (in conjunction with the "write protect" attribute,
9298 # a.k.a. half-intensity outside of protect mode) is used to control
9299 # which parts of the screen are edited/sent/printed (by <mc0>).
9301 # There are at least two major families of ROM, "early" and
9302 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9303 # support a few extra escape sequences for manipulating the off-screen
9304 # memory page, and for sending whole pages back to the host (mainly
9305 # useful in block mode.) The descriptions in this file don't use any
9306 # of those sequences: set cursor position including page (\E-PYX,
9307 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
9308 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
9309 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
9310 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
9311 # are as in <cup>, and some "send page" features mainly useful for
9312 # forms manipulation.
9314 # The keyboard enable (\E") and disable (\E#) sequences are unused,
9315 # except that a terminal reset (<is2>) enables the keyboard.
9317 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
9318 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
9322 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
9323 # sequences (I infer that in some TeleVideo terminal they may invert
9324 # and uninvert the display) so the <flash> sequence given here is a
9325 # cheesy page-flip instead.
9327 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
9328 # tack(1), so it is not included in the descriptions below.
9330 # It's not clear whether auto_left_margin (<bw>) flag should be set
9331 # for these terminals; tack says yes, so it is set here, but this
9332 # differs from other descriptions I've seen.
9334 # Extension print mode (<mc5>) echoes all characters to the printer
9335 # port [in addition to displaying them] except for the page print mode
9336 # sequence (<mc4>); this is a slight violation of the terminfo
9337 # definition for <mc5> but I don't expect it to cause problems. We
9338 # reset to page print mode in <rs1> since it may have been enabled
9341 # The descriptions with plus signs (+) are building blocks.
9343 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
9345 cols#80, it#8, lines#24,
9346 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9347 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
9348 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
9349 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
9350 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
9351 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
9352 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
9353 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
9354 u7=\E?, u8=%c%c\r, u9=\E?,
9356 # This isn't included in the basic capabilities because it is
9357 # typically unusable in combination with the full range of video
9358 # attributes, since the magic cookie attributes turn into ASCII
9359 # control characters, and the half-intensity ("protected") attribute
9360 # converts all affected characters to spaces.
9362 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
9365 # This uses half-intensity mode (<dim>) for standout (<smso>), and
9366 # exposes no other attributes (half-intensity is the only attribute
9367 # that does not generate a magic cookie.)
9369 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
9371 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
9374 # Full magic-cookie attribute support, with half-intensity reverse
9375 # video for standout. Note that we add a space in the <dim> sequence
9376 # to give a consistent magic-cookie count. Also note that <sgr> uses
9377 # backspacing (in the TVI-supported order) to apply all requested
9378 # attributes with only a single magic cookie.
9380 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
9382 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
9384 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
9385 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
9386 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
9388 # This uses the second page memory option to save & restore screen
9389 # contents. If your terminal is missing the option, this description
9390 # should still work, but that has not been tested.
9392 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
9393 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
9394 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
9396 # This simulates flashing by briefly toggling to the other page
9399 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
9400 bel=\EK$<100>\EK, use=tvi912b+2p,
9402 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
9404 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
9405 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
9406 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
9407 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
9408 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9409 kf8=^AG\r, kf9=^AH\r,
9411 # Combinations of the basic building blocks
9413 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
9414 use=tvi912b+2p, use=tvi912b-unk,
9416 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
9417 use=tvi912b+vb, use=tvi912b-unk,
9419 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
9420 use=tvi912b+printer, use=tvi912b-unk,
9422 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
9423 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
9425 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
9426 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
9428 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
9429 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
9431 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
9432 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
9434 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
9435 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
9437 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
9438 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
9440 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9441 use=tvi912b+dim, use=tvi912b-unk,
9443 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9444 use=tvi912b+mc, use=tvi912b-unk,
9446 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9447 use=tvi920b+fn, use=tvi912b-unk,
9449 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9450 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9452 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9453 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9455 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9456 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9458 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9459 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9462 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9463 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9466 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9467 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9470 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9471 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9474 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9475 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9478 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9479 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9482 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9483 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
9485 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
9486 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
9488 # Televideo 921 and variants
9489 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
9490 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
9491 # also added empty <acsc> to suppress tic warning -- esr)
9492 tvi921|televideo model 921 with sysline same as page & real vi function,
9493 OTbs, OTpt, am, hs, xenl, xhp,
9494 cols#80, lines#24, xmc#0,
9495 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9496 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9497 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9498 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
9499 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
9500 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
9501 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
9502 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
9503 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
9504 # without the beeper
9505 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
9506 # also added empty <acsc> to suppress tic warning -- esr)
9507 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
9509 cols#80, lines#24, xmc#0,
9510 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9511 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9512 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9513 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
9514 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
9515 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
9516 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9517 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
9518 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
9519 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
9520 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
9521 dl1=\ER$<2*/>, il1=\EE$<2*/>,
9522 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
9523 kil1=\EE$<2*/>, use=tvi92B,
9525 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
9526 # in from a BSD termcap file because it looks like they do something the
9527 # old ones skip -- esr)
9528 tvi924|televideo tvi924,
9529 am, bw, hs, in, mir, msgr, xenl, xon,
9530 cols#80, it#8, lines#24, wsl#80, xmc#0,
9531 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
9532 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
9533 cub1=^H, cud1=^V, cuf1=^L,
9534 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
9535 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
9536 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
9537 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
9538 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
9539 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9540 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
9541 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
9542 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
9543 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
9544 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
9545 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
9546 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
9549 # TVI925 DIP switches. In each of these, D = Down and U = Up,
9551 # Here are the settings for the external (baud) switches (S1):
9554 # 7 8 9 10 [Printer]
9555 # 1 2 3 4 [Main RS232]
9556 # -----------------------------------------------------
9575 # Settings for word length and stop-bits (S1)
9577 # Position Description
9579 # ---------------------------
9586 # S2 (external) settings
9588 # Position Up Dn Description
9589 # --------------------------------------------
9591 # X Duplex edit (transmit editing keys)
9592 # --------------------------------------------
9593 # 2 X 912/920 emulation
9595 # --------------------------------------------
9599 # --------------------------------------------
9603 # --------------------------------------------
9607 # --------------------------------------------
9611 # --------------------------------------------
9615 # --------------------------------------------
9616 # 6 X White on black display
9617 # X Black on white display
9618 # --------------------------------------------
9621 # --------------------------------------------
9624 # --------------------------------------------
9627 # --------------------------------------------
9630 # --------------------------------------------
9631 # 10 X CR/LF (Auto LF)
9634 # S3 (internal switch) settings:
9636 # Position Up Dn Description
9637 # --------------------------------------------
9640 # --------------------------------------------
9643 # --------------------------------------------
9646 # --------------------------------------------
9649 # --------------------------------------------
9652 # --------------------------------------------
9653 # 4 X Blinking block cursor
9655 # --------------------------------------------
9656 # 4 X Blinking underline cursor
9658 # --------------------------------------------
9659 # 4 X Steady block cursor
9661 # --------------------------------------------
9662 # 4 X Steady underline cursor
9664 # --------------------------------------------
9665 # 6 X Screen blanking timer (ON)
9666 # X Screen blanking timer (OFF)
9667 # --------------------------------------------
9668 # 7 X Page attributes
9670 # --------------------------------------------
9671 # 8 X DCD disconnected
9673 # --------------------------------------------
9674 # 9 X DSR disconnected
9676 # --------------------------------------------
9677 # 10 X DTR Disconnected
9679 # --------------------------------------------
9681 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
9682 tvi925|televideo 925,
9683 OTbs, am, bw, hs, ul,
9684 cols#80, lines#24, xmc#1,
9685 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
9686 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9687 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9688 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
9689 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9690 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9691 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9692 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9693 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9694 tsl=\Eh\Ef, use=adm+sgr,
9695 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9696 # to avoid "magic cookie" standout glitch:
9697 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9699 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
9701 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9702 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9703 # for additional capabilities,
9704 # The following tvi descriptions from B:pjphar and virus!mike
9705 # is for all 950s. It sets the following attributes:
9706 # full duplex (\EDF) write protect off (\E()
9707 # conversation mode (\EC) graphics mode off (\E%)
9708 # white on black (\Ed) auto page flip off (\Ew)
9709 # turn off status line (\Eg) clear status line (\Ef\r)
9710 # normal video (\E0) monitor mode off (\EX or \Eu)
9711 # edit mode (\Er) load blank char to space (\Ee\040)
9712 # line edit mode (\EO) enable buffer control (^O)
9713 # protect mode off (\E\047) duplex edit keys (\El)
9714 # program unshifted send key to send line all (\E016)
9715 # program shifted send key to send line unprotected (\E004)
9716 # set the following to nulls:
9717 # field delimiter (\Ex0\200\200)
9718 # line delimiter (\Ex1\200\200)
9719 # start-protected field delimiter (\Ex2\200\200)
9720 # end-protected field delimiter (\Ex3\200\200)
9721 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9723 # TVI 950 Switch Setting Reference Charts
9727 # S1 1 2 3 4 5 6 7 8 9 10
9728 # +-----------------------+-----+-----+-----------------------+
9729 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9731 # +------+-----------------------+-----+-----+-----------------------+
9732 # | Up | See | 7 | 2 | See |
9733 # +------+-----------------------+-----+-----+-----------------------+
9734 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9735 # +------+-----------------------+-----+-----+-----------------------+
9738 # S2 1 2 3 4 5 6 7 8 9 10
9739 # +-----+-----+-----------------+-----+-----------+-----+-----+
9740 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9741 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9742 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9743 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9744 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9745 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9749 # +-----------+-----+-----+-----+-----+-----------+
9750 # | Display | 1 | 2 | 3 | 4 | Baud |
9751 # +-----------+-----+-----+-----+-----+ |
9752 # | Printer | 7 | 8 | 9 | 10 | Rate |
9753 # +-----------+-----+-----+-----+-----+-----------+
9754 # | D | D | D | D | 9600 |
9755 # | U | D | D | D | 50 |
9756 # | D | U | D | D | 75 |
9757 # | U | U | D | D | 110 |
9758 # | D | D | U | D | 135 |
9759 # | U | D | U | D | 150 |
9760 # | D | U | U | D | 300 |
9761 # | U | U | U | D | 600 |
9762 # | D | D | D | U | 1200 |
9763 # | U | D | D | U | 1800 |
9764 # | D | U | D | U | 2400 |
9765 # | U | U | D | U | 3600 |
9766 # | D | D | U | U | 4800 |
9767 # | U | D | U | U | 7200 |
9768 # | D | U | U | U | 9600 |
9769 # | U | U | U | U | 19200 |
9770 # +-----+-----+-----+-----+-----------+
9773 # +-----+-----+-----+-----------+
9774 # | 3 | 4 | 5 | Parity |
9775 # +-----+-----+-----+-----------+
9776 # | X | X | D | None |
9777 # | D | D | U | Odd |
9778 # | D | U | U | Even |
9779 # | U | D | U | Mark |
9780 # | U | U | U | Space |
9781 # +-----+-----+-----+-----------+
9785 # +-----+-----+-----------------+
9786 # | 7 | 8 | Communication |
9787 # +-----+-----+-----------------+
9788 # | D | D | Half Duplex |
9789 # | D | U | Full Duplex |
9792 # +-----+-----+-----------------+
9794 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9795 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9796 # should be present and all tvi native modes use the same string for this.
9797 # Finally, note that BSD has cud1=^V. -- esr)
9798 tvi950|televideo 950,
9799 OTbs, am, hs, mir, msgr, xenl, xon,
9800 cols#80, it#8, lines#24, xmc#1,
9801 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9802 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9803 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9804 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9805 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
9807 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9808 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9810 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9811 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9812 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9813 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9814 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9815 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9818 # is for 950 with two pages adds the following:
9819 # set 48 line page (\E\\2)
9820 # place cursor at page 0, line 24, column 1 (\E-07 )
9821 # set local (no send) edit keys (\Ek)
9823 # two page 950 adds the following:
9824 # when entering ex, set 24 line page (\E\\1)
9825 # when exiting ex, reset 48 line page (\E\\2)
9826 # place cursor at 0,24,1 (\E-07 )
9827 # set duplex (send) edit keys (\El) when entering vi
9828 # set local (no send) edit keys (\Ek) when exiting vi
9830 tvi950-2p|televideo950 w/2 pages,
9831 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9832 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9834 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9835 smkx=\El, use=tvi950,
9837 # is for 950 with four pages adds the following:
9838 # set 96 line page (\E\\3)
9839 # place cursor at page 0, line 24, column 1 (\E-07 )
9841 # four page 950 adds the following:
9842 # when entering ex, set 24 line page (\E\\1)
9843 # when exiting ex, reset 96 line page (\E\\3)
9844 # place cursor at 0,24,1 (\E-07 )
9846 tvi950-4p|televideo950 w/4 pages,
9847 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9848 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9850 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9851 smkx=\El, use=tvi950,
9853 # <is2> for reverse video 950 changes the following:
9854 # set reverse video (\Ed)
9856 # set vb accordingly (\Ed ...delay... \Eb)
9858 tvi950-rv|televideo950 rev video,
9859 flash=\Ed$<200/>\Eb,
9860 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9861 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
9865 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9866 tvi950-rv-2p|televideo950 rev video w/2 pages,
9867 flash=\Ed$<200/>\Eb,
9868 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9869 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9871 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9872 smkx=\El, use=tvi950,
9874 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9875 tvi950-rv-4p|televideo950 rev video w/4 pages,
9876 flash=\Ed$<200/>\Eb,
9877 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9878 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9880 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9881 smkx=\El, use=tvi950,
9882 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9883 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9884 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9885 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9886 # the :ko: string had :cl: in it, which means that one of the original
9887 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9888 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9889 # ko implies -- esr)
9890 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9892 tvi955|televideo 955,
9895 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9896 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9897 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9898 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9899 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9900 rmam=\E[=7l, rmxon=^N,
9901 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
9903 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9905 tvi955-w|955-w|televideo955 w/132 cols,
9907 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9908 # use half-intensity as normal mode, full intensity as <bold>
9909 tvi955-hb|955-hb|televideo955 half-bright,
9910 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9911 sgr0=\EG0\E[=5h, use=tvi955,
9912 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9913 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9914 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9915 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9916 # it does to the function keys. I deduced <rmam>/<smam>.
9917 # also added empty <acsc> to suppress tic warning, -- esr)
9918 tvi970|televideo 970,
9919 OTbs, OTpt, am, da, db, mir, msgr,
9920 cols#80, it#8, lines#24,
9921 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9922 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9923 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9924 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9925 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9926 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9927 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9928 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9929 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9930 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9931 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9932 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9933 smul=\E[4m, vpa=\E[%i%p1%dd,
9934 tvi970-vb|televideo 970 with visual bell,
9935 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9937 tvi970-2p|televideo 970 with using 2 pages of memory,
9938 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9940 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9941 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9942 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9943 # <smul> strings are klutzy, but at least use no screen space.
9944 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9945 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9946 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9947 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9948 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9949 tvipt|televideo personal terminal,
9952 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9953 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9954 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9955 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
9956 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9957 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9958 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9959 tvi9065|televideo 9065,
9960 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9961 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9963 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9964 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9965 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9966 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9967 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9968 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9969 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9970 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9971 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9972 il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1,
9974 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9975 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9976 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9977 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9978 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9979 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9980 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
9981 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9982 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9983 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9984 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9985 rep=\E[%p2%db%p1%c, rev=\EG4,
9986 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9987 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9988 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9989 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9990 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
9991 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
9992 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
9993 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9994 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
9996 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
9997 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
9999 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
10000 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
10001 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
10005 # In September 1993, Visual Technology of Westboro, Massachusetts,
10006 # merged with White Pine Software of Nashua, New Hampshire.
10008 # White Pine Software may be contacted at +1 603/886-9050.
10009 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
10012 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
10013 # Recently I hacked together the following termcap for Visual
10014 # Technology's Visual 50 terminal. It's a slight modification of
10015 # the vt52 termcap.
10016 # It's intended to run when the Visual 50 is in vt52 emulation mode
10017 # (I know what you're thinking; if it's emulating a vt52, then why
10018 # another termcap? Well, it turns out that the Visual 50 can handle
10019 # <dl1> and db(?) among other things, which the vt52 can't)
10020 # The termcap works OK for the most part. The only problem is on
10021 # character inserts. The whole line gets painfully redrawn for each
10022 # character typed. Any suggestions?
10023 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
10024 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
10025 # disguise; <kf7>-<kf9> are really l1-l3.
10027 OTbs, OTpt, am, da, db, msgr,
10028 cols#80, it#8, lines#24,
10029 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
10030 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10031 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
10032 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10033 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10034 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10035 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10036 # this one was BSD & SCO's vi50
10037 vi50adm|visual 50 in adm3a mode,
10039 cols#80, it#8, lines#24,
10040 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10041 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10042 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
10043 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10044 rmso=\ET, smso=\EU,
10045 # From: Jeff Siegal <jbs@quiotix.com>
10047 OTbs, am, mir, msgr,
10048 cols#80, it#8, lines#24,
10049 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10050 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10051 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10052 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10053 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10054 smir=\Ea, smso=\EU,
10056 # Visual 200 from BRL
10057 # The following switch settings are assumed for normal operation:
10058 # FULL_DUPLEX SCROLL CR
10059 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10060 # Other switches may be set for operator convenience or communication
10062 # Character insertion is kludged in order to get around the "beep" misfeature.
10063 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10064 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10065 # and <dl1> strings, but we seem to get along fine without them.
10067 OTbs, OTpt, am, mir, msgr,
10068 OTkn#10, cols#80, it#8, lines#24,
10069 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H,
10070 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10071 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
10072 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=\n, invis=\Ea,
10073 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10074 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
10075 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
10076 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
10077 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
10078 rmacs=\EG, rmkx=\E>, rmso=\E3,
10079 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
10080 smkx=\E=, smso=\E4, tbc=\Eg,
10081 # The older Visuals didn't come with function keys. This entry uses
10082 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10083 # If your version of vi doesn't support function keys you may want
10085 vi200-f|visual 200 no function keys,
10086 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10087 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10088 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10090 vi200-rv|visual 200 reverse video,
10091 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10093 # the function keys are programmable but we don't reprogram them to their
10094 # default values with <is2> because programming them is very verbose. maybe
10095 # an initialization file should be made for the 300 and they could be stuck
10097 # (vi300: added <rmam>/<smam> based on init string -- esr)
10098 vi300|visual 300 ansi x3.64,
10101 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
10102 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10103 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10105 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10106 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10107 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10108 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10109 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10110 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10111 smso=\E[1m, smul=\E[4m,
10112 # some of the vi300s have older firmware that has the command
10113 # sequence for setting editing extent reversed.
10114 vi300-old|visual 300 with old firmware (set edit extent reversed),
10115 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10117 # Visual 500 prototype entry from University of Wisconsin.
10118 # The best place to look for the escape sequences is page A1-1 of the
10119 # Visual 500 manual. The initialization sequence given here may be
10120 # overkill, but it does leave out some of the initializations which can
10121 # be done with the menus in set-up mode.
10122 # The :xp: line below is so that emacs can understand the padding requirements
10123 # of this slow terminal. :xp: is 10 time the padding factor.
10124 # (vi500: removed unknown :xp#4: termcap;
10125 # also added empty <acsc> to suppress tic warning -- esr)
10128 cols#80, it#8, lines#33,
10129 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
10130 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10131 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10132 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10133 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10135 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10136 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10137 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
10138 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10140 # The visual 550 is a visual 300 with tektronix graphics,
10141 # and with 33 lines. clear screen is modified here to
10142 # also clear the graphics.
10143 vi550|visual 550 ansi x3.64,
10145 clear=\030\E[H\E[2J, use=vi300,
10147 vi603|visual603|visual 603,
10149 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10150 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10151 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10152 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10153 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10154 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10155 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
10161 # 3471 North First Street
10162 # San Jose, CA 95134
10163 # Vox: (408)-473-1200
10164 # Fax: (408) 473-1222
10165 # Web: http://www.wyse.com
10167 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10168 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10169 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10170 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10173 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10174 # They now own the Qume and Amdek brands, too. So these are the people to
10175 # talk with about all Link, Qume, and Amdek terminals.
10177 # These entries include a few small fixes.
10178 # I canceled the bel capacities in the vb entries.
10179 # I made two trivial syntax fixes in the wyse30 entry.
10180 # I made some entries relative to adm+sgr.
10183 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10185 # Although the Wyse 30 can support more than one attribute
10186 # it requires magic cookies to do so. Many applications do not
10187 # function well with magic cookies. The following terminfo uses
10188 # the protect mode to support one attribute (dim) without cookies.
10189 # If more than one attribute is needed then the wy30-mc terminfo
10192 wy30|wyse30|Wyse 30,
10193 am, bw, hs, mc5i, mir, msgr, xon,
10194 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10195 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10196 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
10197 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10198 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10199 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10200 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10201 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10202 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
10203 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10204 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10205 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10206 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10207 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10208 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10209 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10210 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10211 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10212 smso=\E`7\E), tbc=\E0, tsl=\EF,
10214 # This terminal description uses the non-hidden attribute mode
10215 # (with magic cookie).
10217 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10218 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10221 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10222 rmcup=\EG0, rmso=\EG0,
10223 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10224 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10225 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10226 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10227 smso=\EG4, use=wy30, use=adm+sgr,
10228 # The mandatory pause used by <flash> does not work with
10229 # older versions of terminfo. If you see this effect then
10230 # unset xon and delete the / from the delay.
10231 # i.e. change $<100/> to $<100>
10232 wy30-vb|wyse30-vb|wyse 30 visible bell,
10235 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10236 # Normal) without magic cookies by using the protect mode.
10237 # The following description uses this feature, but when more
10238 # than one attribute is put on the screen at once, all attributes
10239 # will be changed to be the same as the last attribute given.
10240 # The Wyse 50 can support more attributes when used with magic
10241 # cookies. The wy50-mc terminal description uses magic cookies
10242 # to correctly handle multiple attributes on a screen.
10244 wy50|wyse50|Wyse 50,
10245 am, bw, hs, mc5i, mir, msgr, xon,
10246 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10247 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10248 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
10249 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10250 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10251 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10252 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10253 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10254 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10255 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10256 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10257 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10258 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10259 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10260 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
10261 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10262 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10263 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10264 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10266 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10267 smso=\E`6\E), tbc=\E0, tsl=\EF,
10269 # This terminal description uses the non-hidden attribute mode
10270 # (with magic cookie).
10272 # The mandatory pause used by flash does not work with some
10273 # older versions of terminfo. If you see this effect then
10274 # unset <xon> and delete the / from the delay.
10275 # i.e. change $<100/> to $<100>
10276 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10277 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10280 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10281 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10282 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10283 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10284 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10285 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10286 smso=\EGt, use=wy50, use=adm+sgr,
10287 wy50-vb|wyse50-vb|wyse 50 visible bell,
10289 wy50-w|wyse50-w|wyse 50 132-column,
10290 cols#132, lw#7, nlab#16, wsl#97,
10291 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10293 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
10297 # The Wyse 350 is a Wyse 50 with color.
10298 # Unfortunately this means that it has magic cookies.
10299 # The color attributes are designed to overlap the reverse, dim and
10300 # underline attributes. This is nice for monochrome applications
10301 # because you can make underline stuff green (or any other color)
10302 # but for true color applications it's not so hot because you cannot
10303 # mix color with reverse, dim or underline.
10304 # To further complicate things one of the attributes must be
10305 # black (either the foreground or the background). In reverse video
10306 # the background changes color with black letters. In normal video
10307 # the foreground changes colors on a black background.
10308 # This terminfo uses some of the more advanced features of curses
10309 # to display both color and blink. In the final analysis I am not
10310 # sure that the wy350 runs better with this terminfo than it does
10311 # with the wy50 terminfo (with user adjusted colors).
10313 # The mandatory pause used by flash does not work with
10314 # older versions of terminfo. If you see this effect then
10315 # unset xon and delete the / from the delay.
10316 # i.e. change $<100/> to $<100>
10318 # Bug: The <op> capability resets attributes.
10319 wy350|wyse350|Wyse 350,
10320 am, bw, hs, mc5i, mir, xon,
10321 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
10323 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
10324 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
10325 cub1=^H, cud1=\n, cuf1=^L,
10326 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
10327 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
10328 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
10329 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
10330 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
10331 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10332 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10333 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10334 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10335 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10336 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10337 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
10338 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10339 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
10340 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
10341 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
10342 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
10343 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
10345 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
10346 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
10347 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
10349 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
10350 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
10351 wy350-vb|wyse350-vb|wyse 350 visible bell,
10353 wy350-w|wyse350-w|wyse 350 132-column,
10354 cols#132, lw#7, nlab#16, wsl#97,
10355 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10357 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
10360 # This terminfo description is untested.
10361 # The wyse100 emulates an adm31, so the adm31 entry should work.
10365 cols#80, lines#24, xmc#1,
10366 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10367 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10368 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
10369 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10370 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10371 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
10372 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
10374 # The Wyse 120/150 has most of the features of the Wyse 60.
10375 # This terminal does not need padding up to 9600 baud!
10376 # <msgr> should be set but the clear screen fails when in
10377 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10380 wy120|wyse120|wy150|wyse150|Wyse 120/150,
10381 am, bw, hs, km, mc5i, mir, msgr, xon,
10382 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10383 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10384 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10385 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10386 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10387 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10388 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
10389 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10390 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10392 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10393 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10394 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10395 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10396 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10397 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10398 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10399 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10400 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10401 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10402 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10403 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
10404 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10405 rs3=\EwG\Ee($<100>,
10406 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10407 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10408 %{64}%|%;%?%p7%t%{1}%|%;%c,
10409 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10410 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10411 tbc=\E0, tsl=\EF, use=adm+sgr,
10413 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
10414 cols#132, lw#7, nlab#16, wsl#97,
10415 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10416 rs2=\E`;$<70>, use=wy120,
10418 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
10419 lh@, lines#25, lw@, nlab@,
10420 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
10422 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
10423 lh@, lines#25, lw@, nlab@,
10424 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
10426 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
10429 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
10432 # The Wyse 60 is like the Wyse 50 but with more padding.
10433 # The reset strings are slow and the pad times very depending
10434 # on other parameters such as font loading. I have tried
10435 # to follow the following outline:
10437 # <rs1> -> set personality
10438 # <rs2> -> set number of columns
10439 # <rs3> -> set number of lines
10440 # <is1> -> select the proper font
10441 # <is2> -> do the initialization
10442 # <is3> -> set up display memory (2 pages)
10444 # The Wyse 60's that have vt100 emulation are slower than the
10445 # older Wyse 60's. This change happened mid-1987.
10446 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
10448 # The meta key is only half right. This terminal will return the
10449 # high order bit set when you hit CTRL-function_key
10451 # It may be useful to assign two function keys with the
10452 # values \E=(\s look at old data in page 1
10453 # \E=W, look at bottom of page 1
10454 # where \s is a space ( ).
10457 # The Wyse 60 runs faster when the XON/XOFF
10458 # handshake is turned off.
10460 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
10461 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10462 wy60|wyse60|Wyse 60,
10463 am, bw, hs, km, mc5i, mir, msgr,
10464 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
10465 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10466 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
10467 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10469 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
10470 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10471 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
10472 ip=$<3>, is1=\EcB0\EcC1,
10473 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10475 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10476 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10477 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10478 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10479 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10480 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10481 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10482 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10483 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10484 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10485 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
10486 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
10487 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
10488 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
10489 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10490 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10491 %{64}%|%;%?%p7%t%{1}%|%;%c,
10492 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10493 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10494 tbc=\E0, tsl=\EF, use=adm+sgr,
10496 wy60-w|wyse60-w|wyse 60 132-column,
10497 cols#132, lw#7, nlab#16, wsl#97,
10498 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
10499 rs2=\EeF$<150>\E`;$<150>, use=wy60,
10501 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
10502 lh@, lines#25, lw@, nlab@,
10503 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
10504 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
10505 lh@, lines#25, lw@, nlab@,
10506 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
10508 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
10510 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
10511 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
10512 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
10513 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
10514 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
10515 cols#132, lw#7, nlab#16, wsl#97,
10516 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10517 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
10518 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
10520 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
10521 lh@, lines#43, lw@, nlab@,
10522 pln@, rs3=\Ee+$<150>, use=wy60-42,
10523 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
10524 lh@, lines#43, lw@, nlab@,
10525 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
10527 wy60-vb|wyse60-vb|Wyse 60 visible bell,
10529 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
10532 # The Wyse-99GT looks at lot like the Wyse 60 except that it
10533 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
10534 # setup parameter controls the number of lines on the screen.
10535 # For the Wyse 99GT the "lines" setup parameter controls the
10536 # number of lines in a page. The screen can display 25 lines max.
10537 # The Wyse-99GT also has personalities for the VT220 and
10538 # Tektronix 4014. But this has no bearing on the native mode.
10540 # (msgr) should be set but the clear screen fails when in
10541 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10542 # then set msgr, else use msgr@.
10544 # u0 -> enter Tektronix mode
10545 # u1 -> exit Tektronix mode
10547 wy99gt|wyse99gt|Wyse 99gt,
10549 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
10550 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
10551 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
10552 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
10553 u0=\E~>\E8, u1=\E[42h, use=wy60,
10555 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
10556 cols#132, lw#7, nlab#16, wsl#97,
10557 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10558 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
10561 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
10562 lh@, lines#25, lw@, nlab@,
10563 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
10565 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
10566 lh@, lines#25, lw@, nlab@,
10567 pln@, rs2=\E`;$<150>, use=wy99gt-w,
10569 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
10572 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
10573 bel@, use=wy99gt-w,
10575 # Can't set tabs! Other bugs (ANSI mode only):
10576 # - can't redefine function keys (anyway, key redefinition in ANSI mode
10577 # is too much complex to be described);
10578 # - meta key can't be described (the terminal forgets it when reset);
10579 # The xon-xoff handshaking can't be disabled while in ansi personality, so
10580 # emacs can't work at speed greater than 9600 baud. No padding is needed at
10582 # dch1 has been commented out because it causes annoying glittering when
10583 # vi deletes one character at the beginning of a line with tabs in it.
10584 # dch makes sysgen(1M) have a horrible behaviour when deleting
10585 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
10586 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
10587 # not, so smir and rmir are commented out as well.
10588 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10589 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
10590 am, km, mc5i, mir, msgr, xenl,
10591 cols#80, it#8, lines#25, vt#3,
10592 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
10593 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10594 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
10595 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
10596 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
10597 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
10598 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
10599 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
10600 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
10601 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
10602 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
10603 il1=\E[L, ind=\n$<1>, invis=\E[8m,
10604 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
10605 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
10606 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10607 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
10608 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
10609 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
10610 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
10611 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
10612 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
10613 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10614 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
10615 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
10616 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
10619 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
10620 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
10621 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
10622 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
10624 # This is the american terminal. Here tabs work fine.
10625 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10626 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
10627 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
10629 # This terminal (firmware version 02) has a lot of bugs:
10630 # - can't set tabs;
10631 # - other bugs in ANSI modes (see above).
10632 # This description disables handshaking when using cup. This is because
10633 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
10634 # cannot be used at speeds greater than 9600 baud, because at greater
10635 # speeds handshaking is needed even for character sending. If you use
10636 # DTR handshaking, you can use even greater speeds.
10637 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10638 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
10639 am, bw, hs, km, mc5i, mir, msgr, xon,
10640 cols#80, it#8, lines#25, wsl#46,
10641 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
10642 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
10643 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
10644 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10645 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
10646 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
10647 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
10648 ind=\n, invis=\EG3,
10649 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
10650 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
10652 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
10653 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
10654 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
10655 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
10656 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
10657 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10658 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
10659 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
10660 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
10661 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
10662 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
10663 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
10664 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
10665 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
10667 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
10668 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
10670 # This is the american terminal. Here tabs work.
10671 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10672 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
10673 hts=\E1, tbc=\E0, use=wy99f,
10676 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
10677 # The reset strings are slow and the pad times very depending
10678 # on other parameters such as font loading. I have tried
10679 # to follow the following outline:
10681 # <rs1> -> set personality
10682 # <rs2> -> set number of columns
10683 # <rs3> -> set number of lines
10684 # <is1> -> select the proper font
10685 # <is2> -> do the initialization
10686 # <is3> -> set up display memory (2 pages)
10688 # The display memory may be used for either text or graphics.
10689 # When "Display Memory = Shared" the terminal will have more pages
10690 # but garbage may be left on the screen when you switch from
10691 # graphics to text. If "Display Memory = Unshared" then the
10692 # text area will be only one page long.
10694 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
10695 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10696 wy160|wyse160|Wyse 160,
10697 am, bw, hs, km, mc5i, mir, msgr,
10698 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
10699 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10700 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
10701 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10702 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
10703 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
10704 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
10705 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
10706 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10708 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10709 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10710 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10711 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10712 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10713 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10714 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10715 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
10716 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10717 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10718 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
10719 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
10720 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
10721 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
10722 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10723 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10724 %{64}%|%;%?%p7%t%{1}%|%;%c,
10725 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10726 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10727 tbc=\E0, tsl=\EF, use=adm+sgr,
10729 wy160-w|wyse160-w|wyse 160 132-column,
10730 cols#132, lw#7, nlab#16, wsl#90,
10731 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
10732 rs2=\EeF$<150>\E`;$<150>, use=wy160,
10734 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10735 lh@, lines#25, lw@, nlab@,
10736 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10737 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10738 lh@, lines#25, lw@, nlab@,
10739 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10741 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10743 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10744 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10745 rs3=\Ee*$<150>, use=wy160,
10746 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10747 cols#132, lw#7, nlab#16, wsl#90,
10748 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10749 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10751 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10752 lh@, lines#43, lw@, nlab@,
10753 pln@, rs3=\Ee+$<150>, use=wy160-42,
10754 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10755 lh@, lines#43, lw@, nlab@,
10756 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10758 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10760 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10763 # The Wyse 75 is a vt100 lookalike without advanced video.
10765 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10766 # Underline) without magic cookies. The following description
10767 # uses this capability, but when more than one attribute is
10768 # put on the screen at once, all attributes will be changed
10769 # to be the same as the last attribute given.
10770 # The Wyse 75 can support more attributes when used with magic
10771 # cookies. The wy75-mc terminal description uses magic cookies
10772 # to correctly handle multiple attributes on a screen.
10774 wy75|wyse75|wyse 75,
10775 am, hs, mc5i, mir, msgr, xenl, xon,
10776 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10777 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10778 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10779 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
10780 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
10781 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10782 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10783 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10784 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10785 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10786 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
10787 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10788 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10789 ind=\n$<2>, ip=$<1>,
10790 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10791 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10792 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10793 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10794 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10795 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10796 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10797 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10798 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10799 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10800 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10801 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10802 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10804 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
10805 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
10807 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10808 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10809 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10811 # This terminal description uses the non-hidden attribute mode
10812 # (with magic cookie).
10814 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10817 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10818 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10819 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
10820 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
10822 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10824 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10827 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10829 rs2=\E[35h\E[?3h$<80>, use=wy75,
10830 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10834 # Wyse 85 emulating a vt220 7 bit mode.
10835 # 24 line screen with status line.
10837 # The vt220 mode permits more function keys but it wipes out
10838 # the escape key. I strongly recommend that <f11> be set to
10840 # The terminal may have to be set for 8 data bits and 2 stop
10841 # bits for the arrow keys to work.
10842 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10843 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10844 # <dch> leave trash on the screen when used without XON/XOFF.
10846 wy85|wyse85|wyse 85,
10847 am, hs, mc5i, mir, msgr, xenl, xon,
10848 cols#80, it#8, lines#24, wsl#80,
10849 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10850 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10851 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
10852 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10853 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10854 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10855 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10856 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10857 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10858 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10859 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10860 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10861 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10862 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10863 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10864 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10865 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10866 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10867 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10868 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10869 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10870 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10871 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10872 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10873 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10874 rs3=\E[?5l, sc=\E7,
10875 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10876 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10877 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10878 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10879 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10881 # Wyse 85 with visual bell.
10882 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10883 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
10885 # Wyse 85 in 132-column mode.
10886 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10888 rs2=\E[35h$<70/>\E[?3h, use=wy85,
10890 # Wyse 85 in 132-column mode with visual bell.
10891 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10894 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10895 # This copes with an apparent firmware bug in the wy85. He writes:
10896 # "What I did was change leave the terminal cursor keys set to Normal
10897 # (instead of application), and change \E[ to \233 for all the keys in
10898 # terminfo. At one point, I found some reference indicating that this
10899 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10900 # me), but I can't find that and the server under my bookmark to "Wyse
10901 # Technical" isn't responding. So there's the question of whether the wy85
10902 # terminfo should reflect the manufacturer's intended behaviour of the terminal
10904 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10905 am, hs, mc5i, mir, msgr, xenl, xon,
10906 cols#80, it#8, lines#24, wsl#80,
10907 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10908 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10909 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
10910 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10911 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10912 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10913 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10914 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10915 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10916 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10917 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10918 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10919 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10920 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10921 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10922 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10923 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10924 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10925 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10926 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10927 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10928 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10929 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10930 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10931 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10932 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10933 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10934 rs3=\E[?5l, sc=\E7,
10935 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10936 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10937 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10938 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10939 tsl=\E[40h\E7\E[25;%i%p1%dH,
10941 # Wyse 185 emulating a vt320 7 bit mode.
10943 # This terminal always displays 25 lines. These lines may be used
10944 # as 24 data lines and a terminal status line (top or bottom) or
10945 # 25 data lines. The 48 and 50 line modes change the page size
10946 # and not the number of lines on the screen.
10948 # The Compose Character key can be used as a meta key if changed
10951 wy185|wyse185|wyse 185,
10952 am, hs, km, mc5i, mir, msgr, xenl, xon,
10953 cols#80, it#8, lines#24, wsl#80,
10954 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10955 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10956 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
10957 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10958 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10960 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10961 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10962 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10963 el=\E[K, el1=\E[1K, enacs=\E)0,
10964 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
10965 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10966 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10967 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10968 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10969 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10970 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10971 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10972 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10973 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10974 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10975 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10976 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10977 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10978 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10979 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10980 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10981 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10982 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10983 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10984 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10985 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10986 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10989 # Wyse 185 with 24 data lines and top status (terminal status)
10990 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10992 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10995 # Wyse 185 with visual bell.
10996 wy185-vb|wyse185-vb|wyse 185+flash,
10999 # Wyse 185 in 132-column mode.
11000 wy185-w|wyse185-w|wyse 185 in 132-column mode,
11002 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11003 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
11005 # Wyse 185 in 132-column mode with visual bell.
11006 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
11009 # wy325 terminfo entries
11010 # Done by Joe H. Davis 3-9-92
11012 # lines 25 columns 80
11014 wy325|wyse325|Wyse epc,
11015 am, bw, hs, mc5i, mir,
11016 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11017 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11018 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11019 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11020 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11021 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11022 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11023 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11024 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
11026 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11027 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11028 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11029 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11030 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11031 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
11032 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11033 mc0=\EP, mc4=^T, mc5=\Ed#,
11034 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11035 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11036 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11037 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11038 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11039 rs3=\EwG\Ee($<100>,
11040 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11041 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11042 %{64}%|%;%?%p7%t%{1}%|%;%c,
11043 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11044 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11045 tsl=\EF, use=adm+sgr,
11048 # lines 24 columns 80 vb
11050 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11054 # lines 24 columns 132
11056 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11057 cols#132, lw#7, nlab#16, wsl#97,
11058 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11059 rs2=\E`;$<70>, use=wy325,
11061 # lines 25 columns 80
11063 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11064 lh@, lines#25, lw@, nlab@,
11065 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11067 # lines 25 columns 132
11069 wy325-25w|wyse325-25w|wy325 132 columns,
11070 lh@, lines#25, lw@, nlab@,
11071 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11073 # lines 25 columns 132 vb
11075 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11079 # lines 42 columns 80
11081 wy325-42|wyse325-42|wyse-325 42 lines,
11082 lh@, lines#42, lw@, nlab@,
11083 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11085 # lines 42 columns 132
11087 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11088 lh@, lines#42, lw@, nlab@,
11089 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11091 # lines 42 columns 132 vb
11093 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11096 # lines 43 columns 80
11098 wy325-43|wyse325-43|wyse-325 43 lines,
11099 lh@, lines#43, lw@, nlab@,
11102 # lines 43 columns 132
11104 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11105 lh@, lines#43, lw@, nlab@,
11106 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11108 # lines 43 columns 132 vb
11110 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11113 # Wyse 370 -- 24 line screen with status line.
11115 # The terminal may have to be set for 8 data bits and 2 stop
11116 # bits for the arrow keys to work.
11118 # If you change keyboards the terminal will send different
11119 # escape sequences.
11120 # The following definition is for the basic terminal without
11123 # <u0> -> enter Tektronix 4010/4014 mode
11124 # <u1> -> exit Tektronix 4010/4014 mode
11125 # <u2> -> enter ASCII mode (from any ANSI mode)
11126 # <u3> -> exit ASCII mode (goto native ANSI mode)
11127 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11128 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11130 # Bug: The <op> capability resets attributes.
11131 wy370-nk|wyse 370 without function keys,
11132 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11133 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11134 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11135 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11136 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11137 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11138 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11139 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11140 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11141 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11142 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11143 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11144 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11145 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11146 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11148 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11149 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11150 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11151 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11153 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11154 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11155 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11157 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11158 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11159 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11160 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11161 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11162 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11163 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11164 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11165 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11166 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11167 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11168 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11169 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11170 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11172 # Function key set for the ASCII (wy-50 compatible) keyboard
11173 # This is the default 370.
11175 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11176 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11177 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11178 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11179 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11180 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11181 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11182 knp=\E[U, kpp=\E[V, use=wy370-nk,
11184 # Function key set for the VT-320 (and wy85) compatible keyboard
11186 wy370-105k|Wyse 370 with 105 key keyboard,
11187 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11188 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11189 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11190 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11191 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11192 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11193 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11194 use=wy370-nk, use=vt220+keypad,
11196 # Function key set for the PC compatible keyboard
11198 wy370-EPC|Wyse 370 with 102 key keyboard,
11199 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11200 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11201 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11202 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11203 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11205 # Wyse 370 with visual bell.
11206 wy370-vb|Wyse 370 with visible bell,
11209 # Wyse 370 in 132-column mode.
11210 wy370-w|Wyse 370 in 132-column mode,
11212 rs2=\E[35h\E[?3h$<70>, use=wy370,
11214 # Wyse 370 in 132-column mode with visual bell.
11215 wy370-wvb|Wyse 370 with visible bell 132-columns,
11216 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11217 wy370-rv|Wyse 370 reverse video,
11218 rs3=\E[32h\E[?5h, use=wy370,
11220 # Wyse 99gt Tektronix 4010/4014 emulator,
11222 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11225 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11226 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11227 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11228 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11229 %{31}%&%{64}%+%c\037,
11231 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11234 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11236 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
11238 # Wyse 160 Tektronix 4010/4014 emulator,
11240 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11241 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11242 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11243 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11244 %{31}%&%{64}%+%c\037,
11245 home=^]8`g @\037, use=wy99gt-tek,
11247 # Wyse 370 Tektronix 4010/4014 emulator,
11249 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11252 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11253 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11254 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11255 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11257 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11260 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11262 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
11263 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11265 # Vendor-supplied Wyse entries end here.
11268 #TITLE: TERMINFO ENTRY WY520
11270 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11271 # BBS with the addition of more function keys and special keys.
11273 # rs1 -> set personality
11274 # rs2 -> set number of columns
11275 # rs3 -> set number of lines
11276 # is1 -> select the proper font
11277 # is2 -> do the initialization
11278 # is3 -> If this string is empty then rs3 gets sent.
11280 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11281 # - The BS key is programmed to generate BS in smcup since
11282 # is2 doesn't seem to work.
11283 # - Remove and shift/Remove: delete a character
11284 # - Insert : enter insert mode
11285 # - Find : delete to end of file
11286 # - Select : clear a line
11287 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11289 # - Bottom status line (host writable line) is used.
11290 # - smkx,rmkx are removed because this would put the numeric
11291 # keypad in Dec application mode which doesn't seem to work
11292 # with SCO applications.
11294 wy520|wyse520|wyse 520,
11295 am, hs, km, mc5i, mir, xenl, xon,
11296 cols#80, it#8, lines#24, wsl#80,
11297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11298 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11299 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11300 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11301 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11302 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11303 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
11304 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
11305 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
11306 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
11307 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
11308 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11309 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
11310 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11311 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
11312 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
11313 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
11314 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
11315 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
11316 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
11317 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
11318 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11319 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
11320 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
11321 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11322 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11323 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11324 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11325 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
11326 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11327 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
11328 vpa=\E[%i%p1%dd, use=vt220+keypad,
11330 # Wyse 520 with 24 data lines and status (terminal status)
11331 wy520-24|wyse520-24|wyse 520 with 24 data lines,
11333 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11336 # Wyse 520 with visual bell.
11337 wy520-vb|wyse520-vb|wyse 520 with visible bell,
11338 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
11340 # Wyse 520 in 132-column mode.
11341 wy520-w|wyse520-w|wyse 520 in 132-column mode,
11343 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11344 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
11346 # Wyse 520 in 132-column mode with visual bell.
11347 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
11348 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
11351 # Wyse 520 emulating a vt420 7 bit mode.
11352 # The DEL key is programmed to generate BS in is2.
11353 # With EPC keyboard.
11354 # - 'End' key will clear till end of line on EPC keyboard
11355 # - Shift/End : ignored.
11356 # - Insert : enter insert mode.
11357 # - Delete : delete a character (have to change interrupt character
11358 # to CTRL-C: stty intr '^c') for it to work since the
11359 # Delete key sends 7FH.
11360 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
11361 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
11362 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
11365 # Wyse 520 with 24 data lines and status (terminal status)
11366 # with EPC keyboard.
11367 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
11369 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11372 # Wyse 520 with visual bell.
11373 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
11374 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
11376 # Wyse 520 in 132-column mode.
11377 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
11379 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11380 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
11382 # Wyse 520 in 132-column mode with visual bell.
11383 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
11384 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
11386 # Wyse 520 in 80-column, 36 lines
11387 wy520-36|wyse520-36|wyse 520 with 36 data lines,
11390 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11393 # Wyse 520 in 80-column, 48 lines
11394 wy520-48|wyse520-48|wyse 520 with 48 data lines,
11397 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11400 # Wyse 520 in 132-column, 36 lines
11401 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
11404 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11407 # Wyse 520 in 132-column, 48 lines
11408 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
11411 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11415 # Wyse 520 in 80-column, 36 lines with EPC keyboard
11416 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
11419 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11422 # Wyse 520 in 80-column, 48 lines with EPC keyboard
11423 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
11426 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11429 # Wyse 520 in 132-column, 36 lines with EPC keyboard
11430 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
11433 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11436 # Wyse 520 in 132-column, 48 lines with EPC keyboard
11437 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
11440 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11443 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
11444 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
11445 # file and we don't know what <hts> is -- esr)
11446 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
11448 cols#80, it#8, lines#24,
11449 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
11450 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
11451 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
11452 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
11453 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
11454 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
11457 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
11458 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
11459 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11460 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
11463 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
11464 wy100q|Wyse 100 for Quotron,
11466 cols#80, lines#24, xmc#1,
11467 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
11468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11469 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
11470 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
11471 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
11473 #### Kermit terminal emulations
11475 # Obsolete Kermit versions may be listed in the section describing obsolete
11476 # non-ANSI terminal emulators later in the file.
11479 # KERMIT standard all versions.
11480 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11481 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11482 # From: greg small <gts@populi.berkeley.edu> 9-25-84
11483 kermit|standard kermit,
11486 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11487 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11488 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
11489 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
11490 kermit-am|standard kermit plus auto-margin,
11492 is2=K1 Standard Kermit plus Automatic Margins\n,
11494 # IBMPC Kermit 1.2.
11495 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
11496 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
11498 # From: greg small <gts@populi.berkeley.edu> 8-30-84
11499 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
11502 clear=\EH\EJ, ed@, el@,
11503 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
11504 # IBMPC Kermit 1.20
11505 # Cannot use line 25, now acts funny like ansi special scrolling region.
11506 # Initialization must escape from that region by cursor position to line 24.
11507 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
11508 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
11509 # From: greg small <gts@populi.berkeley.edu> 12-19-84
11510 pckermit120|UCB IBMPC Kermit 1.20,
11512 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
11514 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
11516 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
11517 # MS-DOS Kermit 2.27 for the IBMPC
11518 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11519 # Cannot use line 25, now acts funny like ansi special scrolling region.
11520 # Initialization must escape from that region by cursor position to line 24.
11521 # Does not use am: because autowrap is lost when kermit dropped and restarted.
11522 # Reverse video for standout like H19.
11523 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11524 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11525 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
11527 cols#80, it#8, lines#24,
11528 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11529 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11530 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
11531 home=\EH, ht=^I, il1=\EL,
11532 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
11533 \sIBMPC\s3-17-85\n,
11534 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
11535 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
11536 # MS-DOS Kermit 2.27 with automatic margins
11537 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11538 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
11540 cvvis=\EO\Eq\EG\EvK5,
11541 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
11542 \smargins\s3-17-85\n,
11544 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
11545 # Automatic margins now default. Use ansi <sgr> for highlights.
11546 # Define function keys.
11547 # (msk22714: removed obsolete ":kn#10:" -- esr)
11548 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11549 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
11551 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
11552 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
11553 \sIBM\sPC\s3-17-85\n,
11554 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
11555 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
11556 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
11557 # This was designed for a VT320 emulator, but it is probably a good start
11558 # at support for the VT320 itself.
11559 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
11560 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
11561 vt320-k3|MS-Kermit 3.00's vt320 emulation,
11562 am, eslok, hs, km, mir, msgr, xenl,
11563 cols#80, it#8, lines#49, pb#9600, vt#3,
11564 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11565 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11566 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
11567 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11568 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11569 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11570 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11571 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
11572 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
11574 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11575 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
11576 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
11577 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
11578 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11579 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
11580 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
11581 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
11582 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
11583 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
11584 \E[4i\E[?4i\E[m\E[r\E[2$~,
11585 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
11586 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11587 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
11588 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
11589 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
11590 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
11591 vt320-k311|dec vt320 series as defined by kermit 3.11,
11592 am, eslok, hs, mir, msgr, xenl, xon,
11593 cols#80, it#8, lines#24, vt#3,
11594 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11595 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11596 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
11597 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11598 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11599 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11600 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11601 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
11602 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
11603 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
11605 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
11606 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11607 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11608 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
11609 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
11610 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
11611 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
11612 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
11613 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
11614 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
11616 ######## NON-ANSI TERMINAL EMULATIONS
11621 # These entries attempt to describe Avatar, a terminal emulation used with
11622 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
11623 # capabilities, but with cheaper (shorter) control sequences. Messy design,
11624 # excessively dependent on PC idiosyncrasies, but apparently rather popular
11625 # in the BBS world.
11627 # No color support. Avatar doesn't fit either of the Tektronix or HP color
11628 # models that terminfo knows about. An Avatar color attribute is the
11629 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
11631 # I wrote these entries while looking at the Avatar spec. I don't have
11632 # the facilities to test them. Let me know if they work, or don't.
11634 # Avatar escapes not used by these entries (because maybe you're smarter
11635 # and more motivated than I am and can figure out how to wrap terminfo
11636 # around some of them, and because they are weird enough to be funny):
11638 # ^L -- clear window/reset current attribute to default
11639 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
11641 # bit: 6 5 4 3 2 1 0
11643 # +---+---+ | +---+---+
11645 # | | foreground color
11646 # | foreground intensity
11649 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
11650 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
11651 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
11652 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
11653 # (^V^L and ^V^M set the current attribute as a side-effect.)
11654 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
11655 # in the pattern, <c> the number of times the pattern
11656 # should be repeated. If either value is 0, no-op.
11657 # The pattern can contain Avatar console codes,
11658 # including other ^V ^Y patterns.
11660 # ^V^O -- clockwise mode on; turn print direction right each time you
11661 # hit a window edge (yes, really). Turned off by CR
11663 # ^V^Q%c -- query the driver
11664 # ^V^R -- driver reset
11665 # ^V^S -- Sound tone (PC-specific)
11666 # ^V^T -- change highlight at current cursor position to %c
11667 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
11668 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
11671 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11672 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
11673 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
11674 # which is the only method that will actually work for multiple highlights.)
11676 # Update by TD - 2004: half of this was inconsistent. Found documentation
11677 # and repaired most of the damage. sgr0 is probably incorrect, but the
11678 # available documentation gives no clues for a workable string.
11679 avatar0|avatar terminal emulator level 0,
11681 cols#80, it#8, lines#25,
11682 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
11683 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
11684 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
11686 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
11687 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
11688 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
11689 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
11691 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11692 avatar0+|avatar terminal emulator level 0+,
11693 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
11694 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11695 avatar|avatar1|avatar terminal emulator level 1,
11696 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
11697 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
11701 # RBComm is a lean and mean terminal emulator written by the Interrupt List
11702 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
11703 # '90s), especially in the BBS world, and still has some loyal users due to
11704 # its very small memory footprint and to a cute macro language.
11705 rbcomm|IBM PC with RBcomm and EMACS keybindings,
11706 am, bw, mir, msgr, xenl,
11707 cols#80, it#8, lines#25,
11708 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11709 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
11710 cub1=^H, cud1=^C, cuf1=^B,
11711 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
11712 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
11713 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
11714 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
11715 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
11716 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
11717 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
11718 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
11719 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
11720 rbcomm-nam|IBM PC with RBcomm without autowrap,
11722 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
11723 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
11724 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
11725 rbcomm-w|IBM PC with RBcomm in 132 column mode,
11727 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
11728 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
11729 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
11731 ######## LCD DISPLAYS
11734 #### Matrix Orbital
11735 # from: Eric Z. Ayers (eric@ale.org)
11737 # Matrix Orbital 20x4 LCD display
11738 # Command Character is 0xFE (decimal 254, octal 376)
11740 # On this device, cursor addressability isn't possible. The LCD expects:
11741 # 0xfe G <col> <row>
11742 # for cup: %p1 == row and %p2 is column
11745 # cup=\376G%p2%c%p1%c
11746 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
11747 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
11749 # Alas, there is no cursor upline capability on this display.
11751 # These entries add some 'sanity stuff' to the clear function. That is, it
11752 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
11753 # and turns off the cursor blinking and stuff like that.
11755 # NOTE: calling 'beep' turns on the backlight (bell)
11756 # NOTE: calling 'flash' turns it on and back off (visual bell)
11758 MtxOrb|Generic Matrix Orbital LCD display,
11759 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
11760 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
11761 flash=\376B\001$<200>\376F, home=\376H,
11762 MtxOrb204|20x4 Matrix Orbital LCD display,
11763 cols#20, lines#4, use=MtxOrb,
11764 MtxOrb162|16x2 Matrix Orbital LCD display,
11765 cols#16, lines#2, use=MtxOrb,
11768 ######## OLDER TERMINAL TYPES
11770 # This section is devoted to older commercial terminal brands that are now
11771 # discontinued, but known to be still in use or represented by emulations.
11774 #### AT&T (att, tty)
11776 # This section also includes Teletype-branded VDTs.
11778 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11779 # Boundless Technologies); for details, see the header comment on the ADDS
11782 # These are AT&T's official terminfo entries. All-caps aliases have been
11785 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11786 am, eo, mir, msgr, xon,
11787 cols#80, it#8, lines#24,
11788 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
11789 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11790 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11791 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11792 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11793 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11794 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11795 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11796 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11797 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11798 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11799 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11800 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11802 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11803 mc0@, mc4@, mc5@, use=att2300,
11805 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11806 # Seems upward compatible with vt100, plus ins/del line/char.
11807 # On sgr, the protection parameter is ignored.
11808 # No check is made to make sure that only 3 parameters are output.
11809 # standout= reverse + half-intensity = 3 | 5.
11810 # bold= reverse + underline = 2 | 3.
11811 # note that half-bright blinking doesn't look different from normal blinking.
11812 # NOTE:you must program the function keys first, label second!
11813 # (att4410: a BSD entry has been seen with the following capabilities:
11814 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11815 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11816 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11817 am, hs, mir, msgr, xon,
11818 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11819 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
11821 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
11822 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11823 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11824 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11825 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
11826 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
11827 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
11828 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
11829 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
11830 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
11831 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
11833 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11834 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11835 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11836 ll=\E[24H, nel=\r\n,
11837 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
11839 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11840 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11842 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11843 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11844 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11845 tsl=\E7\E[25;%p1%{1}%+%dH,
11847 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11849 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11851 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11853 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11856 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11858 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11860 # 5410 in terms of a vt100
11861 # (v5410: added <rmam>/<smam> based on init string -- esr)
11862 v5410|att5410 in terms of a vt100,
11863 am, mir, msgr, xon,
11864 cols#80, it#8, lines#24, vt#3,
11865 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11866 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11867 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
11868 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
11869 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11870 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11871 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11872 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11873 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11874 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11875 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11877 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
11878 %;m%?%p9%t\016%e\017%;$<2>,
11879 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11880 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11884 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11885 # even! the 5420 has three modes: scroll, window or page mode
11886 # this terminfo should work in scroll or window mode, but doesn't
11887 # take advantage of any of the differences between them.
11889 # Has memory below (2 lines!)
11890 # 3 pages of memory (plus some spare)
11891 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11892 # <hpa>, <hts> would work for these, but these work in both scroll and window
11893 # mode... Unset insert character so insert mode works
11894 # <is1> sets 80 column mode,
11895 # <is2> escape sequence:
11896 # 1) turn off all fonts
11897 # 2) function keys off, keyboard lock off, control display off,
11898 # insert mode off, erasure mode off,
11899 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11900 # 4) reset origin mode
11901 # 5) set line wraparound
11902 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11904 # 8) program ENTER to transmit ^J,
11905 # We use \212 to program the ^J because a bare ^J will get translated by
11906 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11908 # <is3> set screen color to black,
11909 # No representation in terminfo for the delete word key: kdw1=\Ed
11910 # Key capabilities assume the power-up send sequence...
11911 # This <rmcup> is not strictly necessary, but it helps maximize
11912 # memory usefulness: <rmcup=\Ez>,
11913 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11914 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11915 # smkx programs the SYS PF keys to send a set sequence.
11916 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11917 # This string causes them to send the strings <kf1>-<kf8>
11918 # when pressed in SYS PF mode.
11919 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11920 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11921 OTbs, db, mir, xon,
11922 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11923 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11924 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11925 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11926 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11927 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11928 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11929 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11930 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
11931 \E[4i\Ex\E[21;1j\212,
11932 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11933 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11934 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11935 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11936 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11937 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11938 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11939 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11940 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11941 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11942 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11943 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11944 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11945 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11946 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11947 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11950 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11951 cols#132, lm#54, wsl#97,
11952 is1=\E[?3h$<100>, use=att4415,
11954 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11955 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11957 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11958 cols#132, lm#54, wsl#97,
11959 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11962 # Note that this mode permits programming USER PF KEYS and labels
11963 # However, when you program user pf labels you have to reselect
11964 # user pf keys to make them appear!
11965 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11966 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11967 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
11969 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11971 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11972 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11975 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11976 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11979 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11980 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11983 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11984 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11987 att5420_2|AT&T 5420 model 2 80 cols,
11988 am, db, hs, mir, msgr, xon,
11989 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11990 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11991 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11992 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11993 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11994 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11995 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11996 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11997 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11998 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
11999 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12000 indn=\E[%p1%dE, invis=\E[8m,
12001 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
12002 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12004 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
12005 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
12006 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
12007 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
12008 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12009 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12010 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
12011 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
12012 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
12014 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
12015 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
12016 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12018 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12019 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12020 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
12021 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12022 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12023 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
12025 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
12026 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12030 att4418|att5418|AT&T 5418 80 cols,
12033 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12034 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
12035 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12036 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12037 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12038 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12039 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
12040 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12041 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12042 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12043 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12044 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12045 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12046 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12047 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12048 att4418-w|att5418-w|AT&T 5418 132 cols,
12050 is1=\E[?3h, use=att5418,
12052 att4420|tty4420|teletype 4420,
12053 OTbs, da, db, eo, msgr, ul, xon,
12054 cols#80, lines#24, lm#72,
12055 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12056 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12057 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12058 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12059 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12060 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12061 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12062 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12064 # The following is a terminfo entry for the Teletype 4424
12065 # asynchronous keyboard-display terminal. It supports
12066 # the vi editor. The terminal must be set up as follows,
12068 # HIGHLIGHT DEFINITION 3-TONE
12069 # DISPLAY FUNCTION GROUP III
12071 # The second entry below provides limited (a la adm3a)
12072 # operation under GROUP II.
12074 # This must be used with DISPLAY FUNCTION GROUP I or III
12075 # and HIGHLIGHT DEFINITION 3-TONE
12076 # The terminal has either bold or blink, depending on options
12078 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12079 att4424|tty4424|teletype 4424,
12082 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12083 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
12084 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12085 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12086 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12087 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12088 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12089 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
12090 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12091 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12092 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12094 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|
12095 %t;5%;%?%p5%t;0%;m,
12096 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12099 att4424-1|tty4424-1|teletype 4424 in display function group I,
12100 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12103 # This entry is not one of AT&T's official ones, it was translated from the
12104 # 4.4BSD termcap file. The highlight strings are different from att4424.
12105 # I have no idea why this is -- older firmware version, maybe?
12106 # The following two lines are the comment originally attached to the entry:
12107 # This entry appears to avoid the top line - I have no idea why.
12108 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12109 att4424m|tty4424m|teletype 4424M,
12111 cols#80, it#8, lines#23,
12112 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12113 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12114 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
12115 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12116 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12117 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
12118 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12120 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12121 # is quite similar, except for some minor differences. No page
12122 # mode, for example, so all of the <cup> sequences used above have
12123 # to change back to what's being used for the 5410. Many of the
12124 # option settings have changed their numbering as well.
12126 # This has been tested on a preliminary model.
12128 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12129 att5425|tty5425|att4425|AT&T 4425/5425,
12130 am, da, db, hs, mir, msgr, xenl, xon,
12131 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12132 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12133 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12134 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
12135 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12136 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12137 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12138 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12139 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12140 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12141 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12142 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12143 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
12144 invis=\E[8m, is1=\E<\E[?3l$<100>,
12145 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12146 \E[4i\Ex\E[25;1j\212,
12147 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12148 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12149 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12150 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12151 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12152 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12154 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12155 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12156 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12157 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12158 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12159 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12160 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12161 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12162 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12163 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12164 vpa=\E[%p1%{1}%+%dd,
12166 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12167 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12169 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12170 cols#132, lm#54, wsl#97,
12171 is1=\E[?3h$<100>, use=tty5425,
12173 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12174 # I also added <rmam>/<smam> -- esr)
12175 att4426|tty4426|teletype 4426S,
12177 cols#80, lines#24, lm#48,
12178 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12179 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12180 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12181 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12182 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12183 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12184 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12185 il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
12186 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12187 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12188 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12189 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12190 nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12191 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12192 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12193 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12196 # Terminfo entry for the AT&T 510 A Personal Terminal
12197 # Function keys 9 - 16 are available only after the
12198 # screen labeled (soft keys/action blocks) are labeled. Function key
12199 # 9 corresponds to the leftmost touch target on the screen,
12200 # function key 16 corresponds to the rightmost.
12202 # This entry is based on one done by Ernie Rice at Summit, NJ and
12203 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12204 att510a|bct510a|AT&T 510A Personal Terminal,
12205 am, mir, msgr, xenl, xon,
12206 cols#80, lh#2, lines#24, lw#7, nlab#8,
12207 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12208 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12209 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
12210 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12211 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12212 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12213 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12214 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12215 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
12216 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12217 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12218 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12219 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12220 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12221 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12222 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12223 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12224 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12225 %|%t;7%;m%?%p9%t\016%e\017%;,
12226 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12227 smul=\E[4m, tbc=\E[3g,
12229 # Terminfo entry for the AT&T 510 D Personal Terminal
12230 # Function keys 9 through 16 are accessed by bringing up the
12232 # Function key 9 corresponds to the leftmost touch target on the screen,
12233 # function key 16 corresponds to the rightmost.
12235 # There are problems with soft key labeling. These are due to
12236 # strangenesses in the native terminal that are impossible to
12237 # describe in a terminfo.
12238 att510d|bct510d|AT&T 510D Personal Terminal,
12239 am, da, db, mir, msgr, xenl, xon,
12240 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12241 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12242 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12243 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
12244 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12245 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12246 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12247 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12248 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12249 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12250 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
12251 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12252 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12253 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12254 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12255 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12256 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12257 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12258 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12259 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12260 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12261 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12262 rs2=\E[5;0|, sc=\E7,
12263 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12264 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12265 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12266 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12267 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12269 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12270 att500|att513|AT&T 513 using page mode,
12271 am, chts, mir, msgr, xenl, xon,
12272 cols#80, lh#2, lines#24, lw#8, nlab#8,
12273 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12274 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12275 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
12276 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12277 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12278 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12279 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12280 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12281 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12282 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12283 indn=\E[%p1%dE, invis=\E[8m,
12284 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12285 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12286 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12287 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12288 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12289 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12290 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12291 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12292 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12293 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
12294 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12295 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
12296 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
12297 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12298 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12299 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
12300 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
12301 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
12303 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12305 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12307 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
12308 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12309 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12310 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
12311 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
12313 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
12314 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
12315 rs2=\E[5;0|, sc=\E7,
12316 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12317 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12318 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
12319 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
12320 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12323 # printer must be set to EMUL ANSI to accept ESC codes
12324 # <cuu1> stops at top margin
12325 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
12326 # and alt font ascii,wrap on,tabs cleared
12327 # <is2> disables newline on LF,Emphasized off
12328 # The <u0> capability sets form length
12329 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
12331 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
12332 orhi#100, orl#12, orvi#72,
12333 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
12334 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
12335 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
12338 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
12339 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
12340 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
12341 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
12342 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
12343 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
12345 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
12346 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
12347 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
12348 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
12350 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
12351 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
12352 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
12353 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
12354 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
12356 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
12357 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
12358 u0=\E[%p1%dt, vpa=\E[%p1%dd,
12360 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
12361 # The following SET-UP modes are assumed for normal operation:
12362 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
12363 # Other SET-UP modes may be set for operator convenience or communication
12364 # requirements. This termcap description is for the Resident Terminal Mode.
12365 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12366 # The BRL entry also said: UNSAFE :ll=\E[70H:
12367 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
12369 cols#88, it#8, lines#70, vt#3,
12370 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12371 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12372 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12373 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
12374 il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
12375 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12376 kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
12379 # 5620 terminfo (2.0 or later ROMS with char attributes)
12380 # The following SET-UP modes are assumed for normal operation:
12381 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
12382 # Other SET-UP modes may be set for operator convenience or communication
12383 # requirements. This termcap description is for Resident Terminal Mode. No
12384 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12385 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
12386 # Be aware that older versions of the dmd have a firmware bug that affects
12387 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
12388 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
12389 # also has <ll>=\E[70H commented out and marked unsafe.
12390 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
12391 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
12392 OTbs, am, msgr, npc, xon,
12393 cols#88, it#8, lines#70,
12394 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
12395 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12396 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
12397 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12398 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
12399 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12400 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
12401 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
12402 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
12403 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
12404 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
12405 lines#24, use=att5620,
12406 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
12407 lines#34, use=att5620,
12408 # 5620 layer running the "S" system's downloaded graphics handler:
12409 att5620-s|tty5620-s|layer|vitty|5620 S layer,
12411 cols#80, it#8, lines#72,
12412 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
12413 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
12414 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
12415 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12418 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
12420 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12421 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
12422 att605|AT&T 605 80 column 102key keyboard,
12424 cols#80, lines#24, lw#8, nlab#8, wsl#80,
12425 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12426 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
12427 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
12428 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12429 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12430 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12431 il1=\E[L, ind=\n, invis=\E[8m,
12432 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
12433 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
12434 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12435 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
12436 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
12437 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
12438 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
12439 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
12440 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
12441 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
12442 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
12443 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
12444 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
12445 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
12446 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12447 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12448 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12449 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12450 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
12451 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12452 tsl=\E7\E[25;%i%p1%dx,
12453 att605-pc|ATT 605 in pc term mode,
12454 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
12456 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
12457 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
12458 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12459 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
12460 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
12461 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
12462 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
12463 xoffc=g, xonc=e, use=att605,
12464 att605-w|AT&T 605-w 132 column 102 key keyboard,
12466 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
12467 # (att610: I added <rmam>/<smam> based on the init string. I also
12468 # added <indn> and <rin> because the BSD file says the att615s have them,
12469 # and the 615 is like a 610 with a big keyboard, and most of their other
12470 # smart terminals support the same sequence -- esr)
12471 att610|AT&T 610; 80 column; 98key keyboard,
12472 am, eslok, hs, mir, msgr, xenl, xon,
12473 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12474 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12475 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12476 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12477 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12478 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12479 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12480 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12481 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12482 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12483 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12484 indn=\E[%p1%dS, invis=\E[8m,
12485 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
12486 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12487 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12488 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12489 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12490 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12491 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
12493 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12494 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12495 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12496 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
12497 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12498 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12499 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12500 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
12501 att610-w|AT&T 610; 132 column; 98key keyboard,
12503 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12506 att610-103k|AT&T 610; 80 column; 103key keyboard,
12507 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12508 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12509 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12510 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12511 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12512 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12513 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
12514 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
12515 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
12516 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
12517 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
12518 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
12519 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
12520 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
12522 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12524 att615|AT&T 615; 80 column; 98key keyboard,
12525 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12526 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12527 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12528 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12529 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12530 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12531 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
12532 att615-w|AT&T 615; 132 column; 98key keyboard,
12533 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12534 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12535 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12536 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12537 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12538 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12539 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
12540 att615-103k|AT&T 615; 80 column; 103key keyboard,
12541 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
12542 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
12543 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
12544 # (att620: I added <rmam>/<smam> based on the init string and
12545 # <rin>/<indn> from a BSD termcap -- esr)
12546 att620|AT&T 620; 80 column; 98key keyboard,
12547 am, eslok, hs, mir, msgr, xenl, xon,
12548 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12550 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12551 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12552 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12553 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12554 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12555 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12556 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12557 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12558 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12559 indn=\E[%p1%dS, invis=\E[8m,
12560 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
12561 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
12562 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12563 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12564 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12565 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
12566 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
12567 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
12568 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
12569 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
12570 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
12571 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12572 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
12573 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12574 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12575 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12576 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
12577 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12578 rs2=\Ec\E[?3l, sc=\E7,
12579 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12580 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
12581 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
12582 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12583 tsl=\E7\E[25;%i%p1%dx,
12584 att620-w|AT&T 620; 132 column; 98key keyboard,
12586 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12588 att620-103k|AT&T 620; 80 column; 103key keyboard,
12589 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12590 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12591 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12592 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12593 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12594 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12595 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
12596 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
12597 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
12598 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
12599 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
12600 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
12601 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12602 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12603 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
12604 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
12606 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
12608 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12611 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
12612 # The following SETUP modes are assumed for normal operation:
12613 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
12614 # Font_Size=Large Non-Layers_Window_Cols=80
12615 # Non-Layers_Window_Rows=60
12616 # Other SETUP modes may be set for operator convenience or communication
12617 # requirements. Some capabilities assume a printer attached to the Aux EIA
12618 # port. This termcap description is for the Fixed Non-Layers Window. No
12619 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12620 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
12621 att630|AT&T 630 windowing terminal,
12622 OTbs, am, da, db, mir, msgr, npc, xon,
12623 cols#80, it#8, lines#60, lm#0,
12624 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
12625 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12626 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12627 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12628 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12629 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12630 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
12631 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12632 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
12633 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
12634 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
12635 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
12636 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
12637 mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
12638 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
12639 rmul=\E[m, rs2=\Ec, sc=\E7,
12640 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
12642 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12643 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
12644 lines#24, use=att630,
12646 # This is the att700 entry for 700 native emulation of the AT&T 700
12647 # terminal. Comments are relative to changes from the 605V2 entry and
12648 # att730 on which the entry is based. Comments show the terminfo
12649 # capability name, termcap name, and description.
12651 # Here is what's going onm in the init string:
12652 # ESC [ 50;4| set 700 native mode (really is 605)
12653 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
12654 # ESC [ 53;0| set GenFlow to Xon/Xoff
12655 # ESC [ 8 ;0| set CR on NL
12656 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
12657 # ESC [ ? 4 l jump scroll
12658 # ESC [ ? 5 l/h video: normal (l); reverse (h)
12659 # ESC [ ?13 l Labels on
12660 # ESC [ ?15 l parity check = no
12661 # ESC [ 13 l monitor mode off
12662 # ESC [ 20 l LF on NL (not CRLF on NL)
12663 # ESC [ ? 7 h autowrap on
12664 # ESC [ 12 h local echo off
12665 # ESC ( B GO = ASCII
12666 # ESC ) 0 G1 = Special Char & Line Drawing
12667 # ESC [ ? 31 l Set 7 bit controls
12669 # Note: Most terminals, especially the 600 family use Reverse Video for
12670 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
12671 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
12672 # standout mode with \E[m (all normal attributes). The 730 entry simply
12673 # exits reverse video which would leave other current attributes intact. It
12674 # was assumed the 730 entry to be more correct so rmso has changed. The
12675 # 605V2 has no sequences to turn individual attributes off, thus its setting
12676 # and the rmso/smso settings from the 730.
12678 # Note: For the same reason as above in rmso I changed exit under-score mode
12679 # to specifically turn off underscore, rather than return to all normal
12682 # Note: The following pkey_xmit is taken from the 605V2 which contained the
12683 # capability as pfxl. It was changed here to pfx since pfxl
12684 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
12685 # allows strings to be parameters and label values must be programmed as
12686 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
12687 # and strings to be parameters. The 605V2 pfx entry should be examined later
12688 # in this regard. For reference the 730 pfxl entry is shown here for comparison
12690 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
12691 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12694 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12697 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12699 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
12703 # modular 10 pin Connector
12704 # Left side Right side
12705 # Pin 1 2 3 4 5 6 7 8 9 10
12707 # Key (notch) at bottom
12719 # The manual is 189 pages and is loaded with details about the escape codes,
12720 # etc..... Available from AT&T CIC 800-432-6600...
12721 # ask for Document number 999-300-660..
12723 att700|AT&T 700 24x80 column display w/102key keyboard,
12724 am, eslok, hs, mir, msgr, xenl, xon,
12725 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12726 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12727 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12728 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12729 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12730 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12731 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12732 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12733 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12734 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
12735 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12736 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
12737 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
12738 \E(B\E)0\E[?31l\E[0m\017,
12739 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
12740 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12741 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
12742 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
12743 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
12744 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
12745 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
12746 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
12747 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
12748 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12749 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
12750 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12751 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
12752 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12753 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
12754 \s\s\s\s\s\s%;%p2%s,
12755 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12756 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12757 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
12758 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
12759 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12760 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12761 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
12762 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
12763 tsl=\E7\E[99;%i%p1%dx,
12765 # This entry was modified 3/13/90 by JWE.
12766 # fixes include additions of <enacs>, correcting <rep>, and modification
12767 # of <kHOM>. (See comments below)
12768 # att730 has status line of 80 chars
12769 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
12770 # the <kf25> and up keys are used for shifted system Fkeys
12771 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
12772 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
12773 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
12774 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
12775 # 102, 102+1, or 122 key keyboards
12777 # (att730: I added <rmam>/<smam> based on the init string -- esr)
12778 att730|AT&T 730 windowing terminal,
12779 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
12780 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
12781 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12782 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12783 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12784 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12785 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12786 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12787 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12788 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12789 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12790 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
12791 ind=\ED, invis=\E[8m,
12792 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
12793 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12794 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12795 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12796 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
12797 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
12798 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
12799 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
12800 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
12801 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
12802 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
12803 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
12804 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12805 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
12806 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12807 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
12808 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12809 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
12810 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12811 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12812 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
12813 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
12814 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12815 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12816 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12817 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
12818 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
12819 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
12820 lines#41, use=att730,
12821 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
12822 lines#24, use=att730,
12823 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12824 flash=\E[?5l$<200>\E[?5h,
12825 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
12826 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12827 lines#41, use=att730r,
12828 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12829 lines#24, use=att730r,
12831 # The following represents the screen layout along with the associated
12832 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12833 # not appear on the screen but are shown to reference the bezel buttons.
12834 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12835 # position relative to the screen.
12839 # +----------------------------------------------------------------+
12841 # XXXX | kf0 kf24 | XXXX
12844 # XXXX | kf1 kf23 | XXXX
12847 # XXXX | kf2 kf22 | XXXX
12850 # XXXX | kf3 kf21 | XXXX
12853 # XXXX | kf4 kf20 | XXXX
12856 # XXXX | kf5 kf19 | XXXX
12859 # XXXX | kf6 kf18 | XXXX
12865 # +----------------------------------------------------------------+
12867 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12869 # Note: XXXX represents the screen buttons
12875 # The character string sent by key 'kf26' may be user programmable
12876 # to send either \E[16s, or \E[26s.
12877 # The character string sent by key 'krfr' may be user programmable
12878 # to send either \E[17s, or \E[27s.
12880 # Depression of the "CMD" key sends \E! (kcmd)
12881 # Depression of the "MAIL" key sends \E[26s (kf26)
12882 # "REDRAW" same as "REFRESH" (krfr)
12884 # "kf" functions adds carriage return to output string if terminal is in
12887 # The following are functions not covered in the table above:
12889 # Set keyboard character (SKC): \EPn1;Pn2w
12890 # Pn1= 0 Back Space key
12892 # Pn2= Program char (hex)
12894 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12895 # Pn1= Window number (1-39)
12896 # Pn2-Pn5= Y;X;Y;X coordinates
12898 # Screen Selection (SSL): \E[Pnu
12899 # Pn= Window number
12901 # Set Terminal Modes (SM): \E[Pnh
12902 # Pn= 3 Graphics mode
12903 # Pn= > Cursor blink
12904 # Pn= < Enter new line mode
12905 # Pn= = Enter reverse insert/replace mode
12906 # Pn= ? Enter no scroll mode
12908 # Reset Terminal Mode (RM): \E[Pnl
12909 # Pn= 3 Exit graphics mode
12910 # Pn= > Exit cursor blink
12911 # Pn= < Exit new line mode
12912 # Pn= = Exit reverse insert/replace mode
12913 # Pn= ? Exit no scroll mode
12915 # Screen Status Report (SSR): \E[Pnp
12916 # Pn= 0 Request current window number
12917 # Pn= 1 Request current window dimensions
12919 # Device Status Report (DSR): \E[6n Request cursor position
12921 # Call Status Report (CSR): \E[Pnv
12922 # Pn= 0 Call failed
12923 # Pn= 1 Call successful
12925 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12926 # Pn1= Button number to be loaded
12927 # Pn2= Character count of "string"
12928 # Pn3= Key mode being loaded:
12932 # String= Text string (15 chars max)
12934 # Screen Number Report (SNR): \E[Pnp
12935 # Pn= Screen number
12937 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12938 # Pn1= Number of rows available in window
12939 # Pn2= Number of columns available in window
12941 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12942 # Pn1= "Y" Position of cursor
12943 # Pn2= "X" Position of cursor
12945 # Request Answer Back (RAB): \E[c
12947 # Answer Back Response (ABR): \E[?;*;30;VSV
12948 # *= 0 No printer available
12949 # *= 2 Printer available
12950 # V= Software version number
12951 # SV= Software sub version number
12952 # (printer-available field not documented in v1)
12954 # Screen Alignment Aid: \En
12956 # Bell (lower pitch): \E[x
12958 # Dial Phone Number: \EPdstring\
12959 # string= Phone number to be dialed
12961 # Set Phone Labels: \EPpstring\
12962 # string= Label for phone buttons
12964 # Set Clock: \EPchour;minute;second\
12966 # Position Clock: \EPsY;X\
12967 # Y= "Y" coordinate
12968 # X= "X" coordinate
12970 # Delete Clock: \Epr\
12972 # Programming The Function Buttons: \EPfPn;string\
12973 # Pn= Button number (00-06, 18-24)
12974 # (kf00-kf06, kf18-kf24)
12975 # string= Text to sent on button depression
12977 # The following in version 2 only:
12979 # Request For Local Directory Data: \EPp12;\
12981 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12983 # Request for Local Directory Data in print format: \EPp13;\
12985 # Enable 'Prt on Line' mode: \022 (DC2)
12987 # Disable 'Prt on Line' mode: \024 (DC4)
12991 # The following Terminfo entry describes functions which are supported by
12992 # the AT&T 5430/pt505 terminal software version 2 and later.
12993 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12995 cols#80, it#8, lines#24,
12996 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12997 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12998 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
12999 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13000 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13001 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13002 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
13003 il=\E[%p1%dL, il1=\E[L, ind=\n,
13004 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
13005 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13006 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
13007 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
13008 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
13009 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
13010 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13011 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
13012 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
13013 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
13015 # The following Terminfo entry describes functions which are supported by
13016 # the AT&T 5430/pt505 terminal software version 1.
13017 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
13019 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
13020 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
13021 lines#22, use=att505,
13023 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
13024 # This cut mark helps make life less painful for people running ncurses tic
13025 # on machines with relatively little RAM. The file can be broken in half here
13026 # cleanly and compiled in sections -- no `use' references cross this cut
13030 #### Ampex (Dialogue)
13032 # Yes, these are the same people who are better-known for making audio- and
13033 # videotape. I'm told they are located in Redwood City, CA.
13036 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13037 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13038 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13040 cols#80, it#8, lines#24,
13041 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
13042 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13043 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13044 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
13045 smso=\Ej, smul=\El, tbc=\E3,
13046 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13047 ampex175|ampex d175,
13050 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13051 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13052 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
13053 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
13054 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13055 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13056 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13057 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13058 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13059 # mode), this key can be used as the erase key; I find I like this. Because
13060 # some people and some systems may not, there is another termcap ("ampex175")
13061 # that suppresses this little eccentricity by omitting the relevant capability.
13062 ampex175-b|ampex d175 using left arrow for erase,
13063 kbs=^_, use=ampex175,
13064 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13065 # (ampex210: removed obsolete ":kn#10:" -- esr)
13066 ampex210|a210|ampex a210,
13067 OTbs, am, hs, xenl,
13068 cols#80, it#8, lines#24, xmc#1,
13069 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13071 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13072 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13073 if=/usr/share/tabset/std, il1=\EE, invis@,
13074 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13075 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13076 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13077 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13078 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13079 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13080 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13081 # and moved the padding to be *after* the caps -- esr)
13082 ampex219|ampex-219|amp219|Ampex with Automargins,
13084 cols#80, it#8, lines#24,
13085 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13086 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
13087 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13088 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13089 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13090 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
13091 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13092 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13093 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13094 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13095 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13096 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13097 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13098 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13099 cols#132, lines#24,
13100 bel=^G, cr=\r, cud1=\n, ind=\n,
13101 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13102 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13103 ampex232|ampex-232|Ampex Model 232,
13105 cols#80, lines#24, xmc#1,
13106 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13107 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13108 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13109 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13110 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13111 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13112 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13113 kf9=^AI\r, khome=^^, use=adm+sgr,
13114 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13115 ampex232w|Ampex Model 232 / 132 columns,
13116 cols#132, lines#24,
13117 is2=\E\034Eg\El, use=ampex232,
13119 #### Ann Arbor (aa)
13121 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13122 # numbers of function keys. At least some used monitors in portrait mode,
13123 # allowing up to 76-character screen heights! They were reachable at:
13125 # Ann Arbor Terminals
13126 # 6175 Jackson Road
13127 # Ann Arbor, MI 48103
13130 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13131 # can't be found on the Web; I fear they're long dead. R.I.P.
13135 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13136 # Highly modified 6/22 by Mike O'Brien.
13137 # split out into several for the various screen sizes by dave-yost@rand
13138 # Modifications made 3/82 by Mark Horton
13139 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13140 # status line moved to top of screen, <flash> removed 5/82
13141 # Some unknown person at SCO then hacked the init strings to make them more
13144 # assumes the following setup:
13145 # A menu: 0000 1010 0001 0000
13146 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13147 # C menu: 56 66 0 0 9600 0110 1100
13148 # D menu: 0110 1001 1 0
13150 # Briefly, the settings are for the following modes:
13151 # (values are for bit set/clear with * indicating our preference
13152 # and the value used to test these termcaps)
13153 # Note that many of these settings are irrelevant to the terminfo
13154 # and are just set to the default mode of the terminal as shipped
13157 # A menu: 0000 1010 0001 0000
13158 # Block/underline cursor*
13159 # blinking/nonblinking cursor*
13160 # key click/no key click*
13161 # bell/no bell at column 72*
13163 # key pad is cursor control*/key pad is numeric
13164 # return and line feed/return for <cr> key *
13165 # repeat after .5 sec*/no repeat
13166 # repeat at 25/15 chars per sec. *
13168 # hold data until pause pressed/process data unless pause pressed*
13169 # slow scroll/no slow scroll*
13170 # Hold in area/don't hold in area*
13171 # functions keys have default*/function keys disabled on powerup
13173 # show/don't show position of cursor during page transmit*
13178 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13179 # Baud rate (9600*)
13181 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13182 # 1 stop bit*/2 stop bits
13183 # parity error detection off*/on
13185 # keyboard local/on line*
13186 # half/full duplex*
13187 # disable/do not disable keyboard after data transmission*
13189 # transmit entire page/stop transmission at cursor*
13190 # transfer/do not transfer protected characters*
13191 # transmit all characters/transmit only selected characters*
13192 # transmit all selected areas/transmit only 1 selected area*
13194 # transmit/do not transmit line separators to host*
13195 # transmit/do not transmit page tab stops tabs to host*
13196 # transmit/do not transmit column tab stop tabs to host*
13197 # transmit/do not transmit graphics control (underline,inverse..)*
13199 # enable*/disable auto XON/XOFF control
13200 # require/do not require receipt of a DC1 from host after each LF*
13201 # pause key acts as a meta key/pause key is pause*
13209 # XON character (17*)
13210 # XOFF character (19*)
13212 # C menu: 56 66 0 0 9600 0110 1100
13213 # number of lines to print data on (printer) (56*)
13215 # number of lines on a sheet of paper (printer) (66*)
13217 # left margin (printer) (0*)
13219 # number of pad chars on new line to printer (0*)
13221 # printer baud rate (9600*)
13223 # printer parity: 00=odd,01=even*,10=space,11=mark
13224 # printer stop bits: 2*/1
13225 # print/do not print guarded areas*
13227 # new line is: 01=LF,10=CR,11=CRLF*
13231 # D menu: 0110 1001 1 0
13232 # LF is newline/LF is down one line, same column*
13233 # wrap to preceding line if move left from col 1*/don't wrap
13234 # wrap to next line if move right from col 80*/don't wrap
13235 # backspace is/is not destructive*
13237 # display*/ignore DEL character
13238 # display will not/will scroll*
13239 # page/column tab stops*
13240 # erase everything*/erase unprotected only
13242 # editing extent: 0=display,1=line*,2=field,3=area
13247 annarbor4080|aa4080|ann arbor 4080,
13250 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
13251 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13252 %{12}%+%;%{64}%+%c,
13253 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
13254 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13256 # Strange Ann Arbor terminal from BRL
13257 aas1901|Ann Arbor K4080 w/S1901 mod,
13260 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
13261 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
13264 # If you're using the GNU termcap library, add
13265 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13266 # to these capabilities. This is the nonstandard GNU termcap scrolling
13267 # capability, arguments are:
13268 # 1. Total number of lines on the screen.
13269 # 2. Number of lines above desired scroll region.
13270 # 3. Number of lines below (outside of) desired scroll region.
13271 # 4. Total number of lines on the screen, the same as the first parameter.
13272 # The generic Ann Arbor entry is the only one that uses this.
13273 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13274 OTbs, am, km, mc5i, mir, xon,
13276 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13277 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
13278 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13279 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13280 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13281 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13282 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13283 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13284 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13285 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13286 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13287 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13288 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13289 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13290 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13291 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13292 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13293 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13294 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
13296 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
13297 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
13300 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
13302 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13303 vpa=\E[%p1%{1}%+%dd,
13305 aaa+rv|ann arbor ambassador in reverse video,
13306 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
13307 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13308 rs1=\E[H\E[7m\E[J$<156>,
13309 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
13310 %;%?%p7%t8;%;m\016,
13311 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
13312 # Ambassador with the DEC option, for partial vt100 compatibility.
13313 aaa+dec|ann arbor ambassador in dec vt100 mode,
13314 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
13315 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
13316 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
13317 %p7%t8;%;m%?%p9%t\017%e\016%;,
13319 aaa-18|ann arbor ambassador/18 lines,
13321 is2=\E7\E[60;0;0;18p\E8,
13322 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
13324 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
13325 use=aaa+rv, use=aaa-18,
13326 aaa-20|ann arbor ambassador/20 lines,
13328 is2=\E7\E[60;0;0;20p\E8,
13329 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
13331 aaa-22|ann arbor ambassador/22 lines,
13333 is2=\E7\E[60;0;0;22p\E8,
13334 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
13336 aaa-24|ann arbor ambassador/24 lines,
13338 is2=\E7\E[60;0;0;24p\E8,
13339 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
13341 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
13342 use=aaa+rv, use=aaa-24,
13343 aaa-26|ann arbor ambassador/26 lines,
13345 is2=\E7\E[60;0;0;26p\E8,
13346 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
13347 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
13348 aaa-28|ann arbor ambassador/28 lines,
13350 is2=\E7\E[60;0;0;28p\E8,
13351 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
13352 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
13353 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
13356 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13357 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
13358 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
13359 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
13360 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13361 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
13362 use=aaa+rv, use=aaa-30-s,
13363 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
13364 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13365 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
13366 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
13367 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13368 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
13369 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
13371 is2=\E7\E[60;0;0;30p\E8,
13372 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
13373 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
13374 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
13375 use=aaa+rv, use=aaa-30,
13376 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
13377 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13379 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
13380 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13381 use=aaa+rv, use=aaa-30,
13382 aaa-36|ann arbor ambassador/36 lines,
13384 is2=\E7\E[60;0;0;36p\E8,
13385 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
13386 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
13387 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
13388 use=aaa+rv, use=aaa-36,
13389 aaa-40|ann arbor ambassador/40 lines,
13391 is2=\E7\E[60;0;0;40p\E8,
13392 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
13393 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
13394 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
13395 use=aaa+rv, use=aaa-40,
13396 aaa-48|ann arbor ambassador/48 lines,
13398 is2=\E7\E[60;0;0;48p\E8,
13399 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
13400 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
13401 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
13402 use=aaa+rv, use=aaa-48,
13403 aaa-60-s|ann arbor ambassador/59 lines+status,
13406 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13407 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
13408 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13409 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
13410 use=aaa+rv, use=aaa-60-s,
13411 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
13412 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
13413 aaa-60|ann arbor ambassador/60 lines,
13415 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
13417 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
13418 use=aaa+rv, use=aaa-60,
13419 aaa-db|ann arbor ambassador 30/destructive backspace,
13421 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
13423 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
13425 flash=\E[>59h$<100>\E[>59l,
13426 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
13427 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
13428 guru+rv|guru changes for reverse video,
13429 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
13430 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
13431 use=guru+rv, use=guru-33,
13432 guru+s|guru status line,
13434 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
13435 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
13436 tsl=\E[>51h\E[1;%p1%dH\E[2K,
13437 guru-nctxt|guru with no saved context,
13438 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
13439 guru-s|guru-33-s|ann arbor guru/33 lines+status,
13441 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
13442 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13443 guru-24|ann arbor guru 24 lines,
13445 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
13447 guru-44|ann arbor guru 44 lines,
13449 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
13451 guru-44-s|ann arbor guru/44 lines+status,
13453 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
13454 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13455 guru-76|guru with 76 lines by 89 cols,
13457 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
13459 guru-76-s|ann arbor guru/76 lines+status,
13461 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
13462 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13463 guru-76-lp|guru-lp|guru with page bigger than line printer,
13464 cols#134, lines#76,
13465 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
13467 guru-76-w|guru 76 lines by 178 cols,
13468 cols#178, lines#76,
13469 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
13471 guru-76-w-s|ann arbor guru/76 lines+status+wide,
13472 cols#178, lines#75,
13473 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
13474 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13475 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
13476 cols#178, lines#76,
13477 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
13479 aaa-rv-unk|ann arbor unknown type,
13480 lh#0, lw#0, nlab#0,
13481 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
13482 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13484 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
13486 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
13488 #### Applied Digital Data Systems (adds)
13490 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
13491 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
13492 # terminals was merged again. Then AT&T sold the terminal business to
13493 # SunRiver, which later changed its name to Boundless Technologies. The
13494 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
13495 # as of early 1995) are at:
13497 # Boundless Technologies
13498 # 100 Marcus Boulevard
13499 # Hauppauge, NY 11788-3762
13500 # Vox: (800)-231-5445
13501 # Fax: (516)-342-7378
13502 # Web: http://boundless.com
13504 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
13505 # In 1995 Boundless acquired DEC's terminals business.
13508 # Regent: lowest common denominator, works on all regents.
13509 # (regent: renamed ":bc:" to ":le:" -- esr)
13510 regent|Adds Regent Series,
13513 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
13514 home=\EY\s\s, ind=\n, ll=^A,
13515 # Regent 100 has a bug where if computer sends escape when user is holding
13516 # down shift key it gets confused, so we avoid escape.
13517 regent100|Adds Regent 100,
13520 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
13521 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
13522 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
13523 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
13524 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
13525 regent20|Adds Regent 20,
13526 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
13528 regent25|Adds Regent 25,
13529 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
13531 regent40|Adds Regent 40,
13533 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
13534 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13535 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
13536 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
13537 smul=\E0`, use=regent25,
13538 regent40+|Adds Regent 40+,
13539 is2=\EB, use=regent40,
13540 regent60|regent200|Adds Regent 60,
13541 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
13542 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
13544 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
13545 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
13546 viewpoint|addsviewpoint|adds viewpoint,
13549 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
13550 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
13551 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
13552 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
13553 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
13554 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
13555 # Some viewpoints have bad ROMs that foo up on ^O
13556 screwpoint|adds viewpoint with ^O bug,
13557 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
13559 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
13560 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
13561 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
13562 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
13563 # invis=01000100 and %c is the logical or of desired attributes.
13564 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
13566 # Update by TD - 2004:
13568 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
13570 # COMMANDS ASCII CODE
13572 # Address, Absolute ESC,=,row,column
13574 # Aux Port Enable ESC,@
13575 # Aux Port Disable ESC,A
13579 # Cursor forward FF
13582 # Cursor suppress ETB
13583 # Cursor enable CAN
13584 # Erase to end of line ESC,T
13585 # Erase to end of page ESC,Y
13588 # Keyboard unlock SO
13589 # Read current cursor position ESC,?
13590 # Set Attribute ESC,0,x (see below for values of x)
13591 # Tag bit reset ESC,(
13592 # Tag bit set ESC,)
13593 # Transparent Print on ESC,3
13594 # Transparent Print off ESC,4
13600 # Half Intensity A 0101
13602 # Half Intensity Blinking C 0103
13603 # Reverse Video P 0120
13604 # Reverse Video Half Intensity Q 0121
13605 # Reverse Video Blinking R 0122
13606 # Reverse Video Half Intensity
13608 # Underlined ` 0140
13609 # Underlined Half Intensity a 0141
13610 # Underlined Blinking b 0142
13611 # Underlined Half Intensity
13613 # Video suppress D 0104
13614 vp3a+|viewpoint3a+|adds viewpoint 3a+,
13616 cols#80, it#8, lines#24,
13617 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
13618 cub1=^H, cud1=\n, cuf1=^L,
13619 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
13620 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
13621 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13622 nel=\r\n, rev=\E0P\E), rmso=\E(,
13623 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
13624 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
13625 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
13626 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
13627 vp60|viewpoint60|addsvp60|adds viewpoint60,
13630 # adds viewpoint 90 - from cornell
13631 # Note: emacs sends ei occasionally to insure the terminal is out of
13632 # insert mode. This unfortunately puts the viewpoint90 IN insert
13633 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
13634 # - :ei=:im=: must be present in the termcap translation.)
13635 # - <xhp> indicates glitch that attributes stick to location
13636 # - <msgr> means it's safe to move in standout mode
13637 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
13639 # Function key and label capabilities merged in from SCO.
13640 vp90|viewpoint90|adds viewpoint 90,
13641 OTbs, bw, msgr, xhp,
13643 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
13644 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
13645 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
13646 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
13647 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
13648 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13649 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
13650 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
13651 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
13652 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
13653 # Note: if return acts weird on a980, check internal switch #2
13654 # on the top chip on the CONTROL pc board.
13655 adds980|a980|adds consul 980,
13658 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
13659 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
13660 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
13661 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
13662 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
13664 #### C. Itoh Electronics
13666 # As of 1995 these people no longer make terminals (they're still in the
13667 # printer business). Their terminals were all clones of the DEC VT series.
13668 # They're located in Orange County, CA.
13671 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
13672 # the delay times and do an auto tab set rather than the indirect
13673 # file used in vt100.
13674 cit80|cit-80|citoh 80,
13677 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
13678 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
13679 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13680 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
13681 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
13682 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
13683 cit101|citc|C.itoh fast vt100,
13686 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
13687 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13688 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
13689 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
13690 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
13691 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13692 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13693 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
13695 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
13696 # The following termcap entry was created from the Callan cd100 entry. The
13697 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
13698 # full selection of combinations of reverse video, underline, and blink.
13699 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
13700 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
13701 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
13702 cit101e|C. Itoh CIT-101e,
13703 OTbs, OTpt, am, mir, msgr,
13704 cols#80, it#8, lines#24,
13705 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
13706 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
13707 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
13708 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
13709 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
13710 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
13711 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
13712 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
13713 smkx=\E=, smso=\E[7m, smul=\E[4m,
13714 # From: David S. Lawyer, June 1997:
13715 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
13716 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
13717 # late 1980's CIT Terminals went out of business.
13718 # There is no need to use the initialization string is=... (by invoking
13719 # tset or setterm etc.) provided that the terminal has been manually set
13720 # up (and the setup saved with ^S) to be compatible with this termcap. To be
13721 # compatible it should be in ANSI mode (not VT52). A set-up that
13722 # works is to set all the manually settable stuff to factory defaults
13723 # by pressing ^D in set-up mode. Then increase the brightness with the
13724 # up-arrow key since the factory default will likely be dim on an old
13725 # terminal. Then change any options you want (provided that they are
13726 # compatible with the termcap). For my terminal I set: Screen
13727 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
13728 # on. I also set up mine for parity (but you may not need it). Then
13729 # save the setup with ^S.
13730 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
13731 cit101e-rv|Citoh CIT-101e (sets reverse video),
13732 am, eo, mir, msgr, xenl, xon,
13733 cols#80, it#8, lines#24,
13734 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13735 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
13736 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13737 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13738 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13739 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13740 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
13741 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13742 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
13743 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
13744 B\E[m\E[20l\E[1;24r\E[24;1H,
13745 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13746 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
13747 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
13748 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
13749 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
13750 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
13751 u7=\E[6n, u8=\E[?6c, u9=\E[c,
13752 cit101e-n|CIT-101e w/o am,
13754 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
13756 cit101e-132|CIT-101e with 132 cols,
13758 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
13759 cit101e-n132|CIT-101e with 132 cols w/o am,
13762 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
13764 # CIE Terminals CIT-500 from BRL
13765 # The following SET-UP modes are assumed for normal operation:
13766 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
13767 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
13768 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
13769 # Other SET-UP modes may be set for operator convenience or communication
13771 # Hardware tabs are assumed to be set every 8 columns; they can be set up
13772 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
13773 # "stty ixon -ixany" to enable DC3/DC1 flow control!
13774 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
13775 cit500|CIE Terminals CIT-500,
13776 OTbs, OTpt, mir, msgr, xon,
13777 OTkn#10, cols#80, it#8, lines#64, vt#3,
13778 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13779 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13780 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
13781 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13782 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13783 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
13784 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
13785 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
13786 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
13787 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
13788 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
13789 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
13790 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
13791 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
13792 rmso=\E[m, rmul=\E[m,
13793 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
13794 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
13795 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13797 # C. Itoh printers begin here
13798 citoh|ci8510|8510|c.itoh 8510a,
13801 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
13802 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
13804 citoh-pica|citoh in pica,
13805 is1=\EN, use=citoh,
13806 citoh-elite|citoh in elite,
13809 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13812 citoh-comp|citoh in compressed,
13815 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13816 \,097\,105\,113\,121\,129.,
13818 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
13819 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
13821 is1=\EP, use=citoh,
13822 citoh-6lpi|citoh in 6 lines per inch mode,
13823 is3=\EA, use=citoh,
13824 citoh-8lpi|citoh in 8 lines per inch mode,
13826 is3=\EB, use=citoh,
13828 #### Control Data (cdc)
13831 cdc456|cdc 456 terminal,
13834 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13835 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13836 el=^V, home=^Y, il1=\EL, ind=\n,
13838 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13842 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13843 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
13844 kcuu1=^W, khome=^Y,
13845 cdc721ll|CDC Viking with long lines,
13847 cols#132, lines#24,
13848 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13849 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
13850 kcuu1=^W, khome=^Y,
13851 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13855 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
13856 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13857 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
13859 # The following switch/key settings are assumed for normal operation:
13860 # 96 chars SCROLL FULL duplex not BLOCK
13861 # Other switches may be set according to communication requirements.
13862 # Insert/delete-character cannot be used, as the whole display is affected.
13863 # "so" & "se" are commented out until jove handles "sg" correctly.
13866 OTkn#10, cols#80, lines#24,
13867 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
13868 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13869 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
13870 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13871 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13872 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13873 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13874 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13877 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13879 # Part of the long initialization string defines the "DOWN" key to the left
13880 # of the tab key to send an ESC. The real ESC key is positioned way out
13883 # The termcap won't work in 132 column mode due to the way it it moves the
13884 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13885 # handle the 721 in 132 column mode.
13887 # (cdc721: changed :ri: to :sr: -- esr)
13888 cdc721-esc|Control Data 721,
13889 OTbs, OTpt, am, bw, msgr, xon,
13890 OTkn#10, cols#80, it#8, lines#30,
13891 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13892 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13893 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13894 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13895 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
13896 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
13897 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
13899 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13900 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13901 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13902 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13903 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
13908 # Getronics is a Dutch electronics company that at one time was called
13909 # `Geveke' and made async terminals; but (according to the company itself!)
13910 # they've lost all their documentation on the command set. The hardware
13911 # documentation suggests the terminals were actually manufactured by a
13912 # Taiwanese electronics company named Cal-Comp. There are known
13913 # to have been at least two models, the 33 and the 50.
13916 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13917 # screen resolution, a larger screen, at least 1 page of memory above and
13918 # below the screen, apparently pages of memory right and left of the screen
13919 # which can be panned, and about 75 function keys (15 function keys x normal,
13920 # shift, control, func A, func B). It also has more setup possibilities than
13921 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13924 # The vt100 emulation works as is. The entry below describes the rather
13925 # non-conformant (but more featureful) ANSI mode.
13927 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13928 visa50|geveke visa 50 terminal in ansi 80 character mode,
13931 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13932 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
13933 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13934 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13935 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13936 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13937 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
13938 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
13939 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
13940 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13941 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13942 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
13943 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13944 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13945 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13946 lf3=A insert line, lf4=A delete line, lf5=A clear,
13947 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13948 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
13949 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13950 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13951 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13954 #### Human Designed Systems (Concept)
13956 # Human Designed Systems
13958 # King of Prussia, PA 19406
13959 # Vox: (610)-277-8300
13960 # Fax: (610)-275-5739
13961 # Net: support@hds.com
13963 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13964 # the character-terminal business now (1995) and making X terminals. In
13965 # particular, the whole `Concept' line described here was discontinued long
13969 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13970 # Extensive changes to c108 by arpavax:eric Feb 1982
13971 # Some unknown person at SCO then translated it to terminfo.
13973 # There seem to be a number of different versions of the C108 PROMS
13974 # (with bug fixes in its Z-80 program).
13976 # The first one that we had would lock out the keyboard of you
13977 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13978 # Try that on your C108 and see if it sends a ^S when you type it.
13979 # If so, you have an old version of the PROMs.
13981 # You should configure the C108 to send ^S/^Q before running this.
13982 # It is much faster (at 9600 baud) than the c100 because the delays
13984 # new status line display entries for c108-8p:
13985 # <is3> - init str #3 - setup term for status display -
13986 # set programmer mode, select window 2, define window at last
13987 # line of memory, set bkgnd stat mesg there, select window 0.
13989 # <tsl> - to status line - select window 2, home cursor, erase to
13990 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13992 # <fsl> - from status line - 1/2 bright off, select window 0
13994 # <dsl> - disable status display - set bkgnd status mesg with
13997 # There are probably more function keys that should be added but
13998 # I don't know what they are.
14000 # No delays needed on c108 because of ^S/^Q handshaking
14002 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
14003 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
14005 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
14006 c108-4p|concept108-4p|concept 108 w/4 pages,
14007 OTbs, eslok, hs, xon,
14009 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
14010 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
14011 %>%t\001%{96}%-%;%{32}%+%c,
14012 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
14013 ind=\n, is1=\EK\E!\E F,
14014 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
14015 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
14016 smcup=\EU\Ev 8p\Ep\r\E\025,
14017 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
14018 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
14019 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
14021 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
14022 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
14024 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
14026 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
14027 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
14030 # These have only window relative cursor addressing, not screen
14031 # relative. To get it to work right here, smcup/rmcup (which
14032 # were invented for the concept) lock you into a one page
14033 # window for screen style programs.
14035 # To get out of the one page window, we use a clever trick:
14036 # we set the window size to zero ("\Ev " in rmcup) which the
14037 # terminal recognizes as an error and resets the window to all
14040 # This trick works on c100 but does not on c108, sigh.
14042 # Some tty drivers use cr3 for concept, others use nl3, hence
14043 # the delays on cr and ind below. This padding is only needed at
14044 # 9600 baud and up. One or the other is commented out depending on
14045 # local conventions.
14047 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14048 # less than 6 but more than 2 will work.
14050 # Note: can't use function keys f7-f10 because they are
14051 # indistinguishable from arrow keys (!), also, del char and
14052 # clear eol use xon/xoff so they probably won't work very well.
14054 # Also note that we don't define insrt/del char/delline/eop/send
14055 # because they don't transmit unless we reset them - I figured
14056 # it was a bad idea to clobber their definitions.
14058 # The <mc5> sequence changes the escape character to ^^ so that
14059 # escapes will be passed through to the printer. Only trouble
14060 # is that ^^ won't be - ^^ was chosen to be unlikely.
14061 # Unfortunately, if you're sending raster bits through to be
14062 # plotted, any character you choose will be likely, so we lose.
14064 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14065 # cannot be # in is2 because it will hang a c100 with no printer
14067 c100|concept100|concept|c104|c100-4p|hds concept 100,
14068 OTbs, am, eo, mir, ul, xenl,
14069 cols#80, lines#24, pb#9600, vt#8,
14070 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14071 cub1=^H, cud1=\n, cuf1=\E=,
14072 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14073 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14074 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14075 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
14077 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14078 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14079 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14080 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14081 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14082 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14083 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14084 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14085 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14086 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14087 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14088 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14089 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14090 smso=\ED, smul=\EG,
14091 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14092 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14093 smso=\EE, use=c100,
14094 oc100|oconcept|c100-1p|old 1 page concept 100,
14098 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14099 # Lots of notes, originally inline, but ncurses doesn't grok that.
14101 # am: not available in power on mode, but turned on with \E[=107;207h in
14102 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14103 # to specify xenl:, but that would have rendered the last space on the
14104 # last line useless.
14105 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14107 # clear: Could be done with \E[2J alone, except that vi (and probably most
14108 # other programs) assume that this also homes the cursor.
14109 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14110 # scroll the window, and go back to window 1.
14111 # is2: the string may cause a warning to be issued by tic that it
14112 # found a very long line and that it suspects that a comma is missing
14113 # somewhere. This warning can be ignored (unless it comes up more than
14114 # once). The initialization string contains the following commands:
14116 # [Setup mode items changed from factory defaults:]
14117 # \E)0 set alternate character set to
14119 # ^O set character set to default
14120 # [In case it wasn't]
14121 # \E[m turn off all attributes
14122 # [In case they weren't off]
14123 # \E[=107; cursor wrap and
14124 # 207h character wrap on
14125 # \E[90;3u set Fkey definitions to "transmit"
14127 # \E[92;3u set cursor key definitions to
14128 # "transmit" defaults
14129 # \E[43;1u set shift F13 to transmit...
14131 # \E[44;1u set shift F14 to transmit...
14133 # \E[45;1u set shift F15 to transmit...
14135 # \E[46;1u set shift F16 to transmit...
14137 # \E[200;1u set shift up to transmit...
14139 # \E[201;1u set shift down to transmit...
14141 # \E[202;1u set shift right to transmit...
14143 # \E[203;1u set shift left to transmit...
14145 # \E[204;1u set shift home to transmit...
14147 # \E[212;1u set backtab to transmit...
14149 # \E[213;1u set shift backspace to transmit...
14151 # \E[214;1u set shift del to transmit...
14153 # [Necessary items not mentioned in setup mode:]
14154 # \E[2!w move to window 2
14155 # \E[25;25w define window as line 25 of memory
14156 # \E[!w move to window 1
14157 # \E[2*w show current line of window 2 as
14159 # \E[2+x set meta key to use high bit
14160 # \E[;3+} move underline to bottom of character
14162 # All Fkeys are set to their default transmit definitions with \E[90;3u
14163 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14164 # setting MUST be redefined or deactivated, because the default is
14165 # contained in almost all of this terminal's Fkey strings! If for some
14166 # reason "quit" cannot be altered, the Fkeys can, but it would be
14167 # necessary to change ^| to ^] in all of these definitions, and add
14168 # \E[2;029!t to is2.
14169 # lines: is set to 24 because this terminal refuses to treat the 25th
14171 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14173 # lm: Pointless, given that this definition locks a single screen of
14174 # memory into view, but what the hey...
14175 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14176 # other attributes alone), but some programs expect this to turn off
14178 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14179 # attributes alone), but some programs expect this to turn off
14181 # sgr: Attributes are set on this terminal with the string \E[ followed by
14182 # a list of attribute code numbers (in decimal, separated by
14183 # semicolons), followed by the character m. The attribute code
14186 # 2 for dim (which is ignored in power on mode);
14190 # 8 for not displayable; and
14191 # =99 for protected (except that there are strange side
14192 # effects to protected characters which make them inadvisable).
14193 # The mapping of terminfo parameters to attributes is as follows:
14194 # %p1 (standout) = bold and inverse together;
14195 # %p2 (underline) = underline;
14196 # %p3 (reverse) = inverse;
14197 # %p4 (blink) = blinking;
14198 # %p5 (dim) is ignored;
14199 # %p6 (bold) = bold;
14200 # %p7 (invisible) = not displayable;
14201 # %p8 (protected) is ignored; and
14202 # %p9 (alt char set) = alt char set.
14203 # The code to do this is:
14205 # %?%p1%p6%O IF (standout; bold) OR
14206 # %t;1 THEN OUTPUT ;1
14208 # %?%p2 IF underline
14209 # %t;4 THEN OUTPUT ;4
14212 # %t;5 THEN OUTPUT ;5
14214 # %?%p1%p3%O IF (standout; reverse) OR
14215 # %t;7 THEN OUTPUT ;7
14217 # %?%p7 IF invisible
14218 # %t;8 THEN OUTPUT ;8
14221 # %?%p9 IF altcharset
14222 # %t^N THEN OUTPUT ^N
14223 # %e^O ELSE OUTPUT ^O
14225 # sgr0: Everything is turned off (including alternate character set), since
14226 # there is no way of knowing what it is that the program wants turned
14228 # smul: The "underline" attribute is reconfigurable to an overline or
14229 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
14230 # bottom of the character cell. This was done to allow for more readable
14231 # underlined characters, and to be able to distinguish between an
14232 # underlined space, an underscore, and an underlined underscore.
14233 # xenl: Terminal can be configured to not need this, but this "glitch"
14234 # behavior is actually preferable with autowrap terminals.
14236 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14237 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14238 # string modifies the 'O' in kf43 to kf46 to a '$'.
14240 # kcbt was originally ^I but redefined in is2=.
14241 # kHOM was \E[H originally but redefined in is2=, as were a number of
14243 # kDC was originally \177 but redefined in is2=.
14245 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14246 # tsl: Go to window 2, then do an hpa=.
14248 #------- flash=\E[8;3!}^G\E[3;3!}
14249 #------- flash=\E[?5h$<100>\E[?5l
14250 # There are two ways to flash the screen, both of which have their drawbacks.
14251 # The first is to set the bell mode to video, transmit a bell character, and
14252 # set the bell mode back - but to what? There is no way of knowing what the
14253 # user's old bell setting was before we messed with it. Worse, the command to
14254 # set the bell mode also sets the key click volume, and there is no way to say
14255 # "leave that alone", or to know what it's set to, either.
14256 # The second way to do a flash is to set the screen to inverse video, pad for a
14257 # tenth of a second, and set it back - but like before, there's no way to know
14258 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14259 # it that way. The point is moot anyway, since vi (and probably other
14260 # programs) assume that by defining flash=, you want the computer to use it
14261 # INSTEAD of bel=, rather than as a secondary type of signal.
14263 #------- cvvis=\E[+{
14264 # The is the power on setting, which is also as visible as the cursor
14266 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14267 # Windowing is possible, but not defined here because it is also used to
14268 # emulate status line functions. Allowing a program to set a window could
14269 # clobber the status line or render it unusable. There is additional memory,
14270 # but screen scroll functions are destructive and do not make use of it.
14272 #------- dim= Not available in power on mode.
14273 # You have a choice of defining low intensity characters as "half bright" and
14274 # high intensity as "normal", or defining low as "normal" and high as "bold".
14275 # No matter which you choose, only one of either "half bright" or "bold" is
14276 # available at any time, so taking the time to override the default is
14279 #------- prot=\E[=0;99m
14280 # Not defined, because it appears to have some strange side effects.
14281 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14282 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14283 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14284 # Available, but making them available to programs is inadvisable.
14285 # The code to do this is:
14286 # %?%p1%{24}%< IF ((key; 24) <;
14287 # %p1%{30}%> ((key; 30) >;
14288 # %p1%{54}%< (key; 54) <
14291 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
14292 # %t\E[ THEN OUTPUT \E[
14293 # %p1%d OUTPUT (key) as decimal
14294 # [next line applies to pfx only]
14298 # %p2%s OUTPUT (string) as string
14300 # [DEL chosen as delimiter, but could be any character]
14301 # [implied: ELSE do nothing]
14305 # Not defined since anything it might do could be done faster and easier with
14306 # either Meta-Shift-Reset or the main power switch.
14308 #------- smkx=\E[1!z
14309 #------- rmkx=\E[!z
14310 # These sequences apply to the cursor and setup keys only, not to the
14311 # numeric keypad. But it doesn't matter anyway, since making these
14312 # available to programs is inadvisable.
14313 # For the key definitions below, all sequences beginning with \E$ are
14314 # custom and programmed into the terminal via is2. \E$ also has no
14315 # meaning to any other terminal.
14317 #------- cmdch=\E[;%p1%d!t
14318 # Available, but making it available to programs is inadvisable.
14319 #------- smxon=\E[1*q
14320 # Available, but making it available to programs is inadvisable.
14321 # Terminal will send XON/XOFF on buffer overflow.
14322 #------- rmxon=\E[*q
14323 # Available, but making it available to programs is inadvisable.
14324 # Terminal will not notify on buffer overflow.
14325 #------- smm=\E[2+x
14327 # Available, but making them available to programs is inadvisable.
14330 # It's not made clear in the manuals, but based on other ansi/vt type
14331 # terminals, it's a good guess that this terminal is capable of both
14332 # "transparent print" (which doesn't copy data to the screen, and
14333 # therefore needs mc5i: specified to say so) and "auxiliary print"
14334 # (which does duplicate printed data on the screen, in which case mc4=
14335 # and mc5= should use the \E[?4i and \E[?5i strings instead).
14337 hds200|Human Designed Systems HDS200,
14338 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
14339 cols#80, it#8, lines#24, lm#0,
14340 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14341 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
14342 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
14343 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14344 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14345 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14346 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14347 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
14348 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
14349 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14351 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
14352 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
14353 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
14354 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
14355 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
14356 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
14357 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
14358 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14359 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
14360 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
14361 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
14362 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
14363 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
14364 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
14365 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
14366 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
14367 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
14368 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
14369 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
14370 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
14371 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
14372 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
14373 rmul=\E[m\017, sc=\E7,
14374 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
14375 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14376 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
14377 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
14378 vpa=\E[%i%p1%dd, use=ansi+pp,
14380 # <ht> through <el> included to specify padding needed in raw mode.
14381 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
14382 avt-ns|concept avt no status line,
14383 OTbs, am, eo, mir, ul, xenl, xon,
14384 cols#80, it#8, lines#24, lm#192,
14385 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14386 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
14387 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14388 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14389 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14390 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
14391 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
14392 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
14393 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
14394 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
14395 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
14396 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
14398 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14399 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14400 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
14401 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
14402 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
14403 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14404 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
14405 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
14407 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14408 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
14410 sgr0=\E[m\016$<1>, smacs=\017$<1>,
14411 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
14412 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14413 vpa=\E[%p1%{1}%+%dd,
14414 avt-rv-ns|concept avt in reverse video mode/no status line,
14415 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14417 avt-w-ns|concept avt in 132 column mode/no status line,
14418 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14420 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
14421 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14422 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
14424 # Concept AVT with status line. We get the status line using the
14425 # "Background status line" feature of the terminal. We swipe the
14426 # first line of memory in window 2 for the status line, keeping
14427 # 191 lines of memory and 24 screen lines for regular use.
14428 # The first line is used instead of the last so that this works
14429 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
14430 # assumes an 8 page AVT but lm isn't currently used anywhere.)
14432 avt+s|concept avt status line changes,
14435 dsl=\E[0*w, fsl=\E[1;1!w,
14436 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
14437 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
14438 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
14439 avt|avt-s|concept-avt|avt w/80 columns,
14440 use=avt+s, use=avt-ns,
14441 avt-rv|avt-rv-s|avt reverse video w/sl,
14442 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14443 use=avt+s, use=avt-ns,
14444 avt-w|avt-w-s|concept avt 132 cols+status,
14445 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14446 use=avt+s, use=avt-ns,
14447 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
14448 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14449 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
14451 #### Contel Business Systems.
14454 # Contel c300 and c320 terminals.
14455 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
14457 cols#80, lines#24, xmc#1,
14458 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
14459 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
14460 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
14461 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
14462 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
14463 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
14464 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
14465 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
14466 # Contel c301 and c321 terminals.
14467 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
14468 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
14471 #### Data General (dg)
14473 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
14474 # the terminals group at Data General was shut down in 1991; all these
14475 # terminals have thus been discontinued.
14477 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
14478 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
14479 # sequentially, first the unmodified key codes are listed as F1 through F15.
14480 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
14481 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
14482 # F46 through F60. This is done in the private "includes" below whose names
14483 # start with "dgkeys+".
14485 # DG terminals generally support 8 bit characters. For each of these terminals
14486 # two descriptions are supplied:
14487 # 1) A default description for 8 bits/character communications, which
14488 # uses the default DG international character set and keyboard codes.
14489 # 2) A description with suffix "-7b" for 7 bits/character communications.
14490 # This description must use the NON-DEFAULT native keyboard language.
14492 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
14493 # Ctrl/Shift fdkeys (kf34-kf44).
14495 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
14496 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
14497 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
14498 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
14499 kf11=\233011z, kf12=\233012z, kf13=\233013z,
14500 kf14=\233014z, kf15=\233000z, kf16=\233101z,
14501 kf17=\233102z, kf18=\233103z, kf19=\233104z,
14502 kf2=\233002z, kf20=\233105z, kf21=\233106z,
14503 kf22=\233107z, kf23=\233108z, kf24=\233109z,
14504 kf25=\233110z, kf26=\233111z, kf27=\233112z,
14505 kf28=\233113z, kf29=\233114z, kf3=\233003z,
14506 kf30=\233100z, kf31=\233201z, kf32=\233202z,
14507 kf33=\233203z, kf34=\233204z, kf35=\233205z,
14508 kf36=\233206z, kf37=\233207z, kf38=\233208z,
14509 kf39=\233209z, kf4=\233004z, kf40=\233210z,
14510 kf41=\233211z, kf42=\233212z, kf43=\233213z,
14511 kf44=\233214z, kf45=\233200z, kf46=\233301z,
14512 kf47=\233302z, kf48=\233303z, kf49=\233304z,
14513 kf5=\233005z, kf50=\233305z, kf51=\233306z,
14514 kf52=\233307z, kf53=\233308z, kf54=\233309z,
14515 kf55=\233310z, kf56=\233311z, kf57=\233312z,
14516 kf58=\233313z, kf59=\233314z, kf6=\233006z,
14517 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
14518 khome=\233H, kprt=\233i,
14520 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
14521 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
14522 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14523 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
14524 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
14525 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
14526 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
14527 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
14528 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
14529 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
14530 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
14531 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
14532 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
14533 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
14534 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
14535 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
14536 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
14537 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
14538 kf9=\E[009z, khome=\E[H, kprt=\E[i,
14540 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
14541 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
14542 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
14543 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
14544 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
14545 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
14546 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
14547 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
14548 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
14549 kf8=^^x, kf9=^^y, khome=^H,
14551 dgkeys+15|Private entry describing 15 DG mode special keys,
14552 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
14553 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
14554 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
14555 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
14556 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
14557 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
14558 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
14559 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
14560 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
14561 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
14562 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
14565 # Data General color terminals use the "Tektronix" color model. The total
14566 # number of colors varies with the terminal model, as does support for
14567 # attributes used in conjunction with color.
14569 # Removed u7, u8 definitions since they conflict with tack:
14570 # Preserve user-defined colors in at least some cases.
14572 # Default is ACM mode.
14573 # u8=^^F}20^^Fi^^F}21,
14575 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
14577 colors#16, ncv#53, pairs#256,
14579 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14580 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14581 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14582 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14583 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14585 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
14588 # Video attributes are coordinated using static variables set by "sgr", then
14589 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
14590 # (D=dim, U=underline, B=blink, R=reverse.)
14591 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
14593 colors#8, ncv#16, pairs#64,
14594 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
14595 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14596 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14597 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14598 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14599 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14600 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14602 dg+color|Color info for Data General D470C terminals in ANSI mode,
14603 colors#16, ncv#53, pairs#256,
14604 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14605 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14607 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14608 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14610 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14611 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14613 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14614 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14618 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
14620 colors#8, ncv#16, pairs#64,
14622 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14624 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14626 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14628 dgmode+color|Color info for Data General D470C terminals in DG mode,
14629 colors#16, pairs#256,
14630 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14631 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14632 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14633 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14636 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
14638 colors#52, ncv#53, pairs#26,
14639 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
14640 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
14641 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
14643 oc=\036RG01A00FF00000000\036RG01B00000000FF00
14644 \036RG01C007F00000000\036RG01D000000007F00,
14645 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
14646 scp=\036RG2%p1%02X,
14648 # Colors are in the order: normal, reverse, dim, dim + reverse.
14649 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
14651 colors#52, ncv#53, pairs#26,
14652 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
14653 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
14654 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
14655 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
14656 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
14657 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
14658 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
14659 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
14660 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
14661 0000000\036RG01=000000007?00,
14662 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
14663 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
14665 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
14666 # Initialization string 1 sets:
14667 # ^R - vertical scrolling enabled
14668 # ^C - blinking enabled
14669 dg-generic|Generic Data General terminal in DG mode,
14672 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
14673 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
14674 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
14675 smul=^T, use=dgkeys+11,
14677 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
14678 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
14679 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
14680 # maybe they were originally nuls (which would fit).
14682 dg200|data general dasher 200,
14685 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
14686 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
14687 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
14688 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
14689 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
14692 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
14693 dg210|dg-ansi|Data General 210/211,
14696 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
14697 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14698 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14699 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
14700 smso=\E[7;m, smul=\E[4;m,
14701 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
14702 # courtesy of Carlos Rucalde of Vantage Software, Inc.
14703 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
14704 # I suspect the d200 function keys actually work on the dg211, check it out.)
14705 dg211|Data General d211,
14706 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
14707 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
14708 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
14710 # dg450 from Cornell (not official)
14711 dg450|dg6134|data general 6134,
14712 cub1@, cuf1=^X, use=dg200,
14715 # Note: lesser Dasher terminals will not work with vi because vi insists upon
14716 # having a command to move straight down from any position on the bottom line
14717 # and scroll the screen up, or a direct vertical scroll command. The 460 and
14718 # above have both, the D210/211, for instance, has neither. We must use ANSI
14719 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
14720 # backspace on all terminals. This is not so in DG mode.
14721 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
14722 # grounds that there is no matching ":ml:"
14723 dg460-ansi|Data General Dasher 460 in ANSI-mode,
14724 OTbs, am, msgr, ul,
14725 cols#80, it#8, lines#24,
14726 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
14727 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
14728 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
14729 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
14730 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14731 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
14732 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
14733 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
14734 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
14735 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
14736 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
14738 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
14739 u7=\E[6n, u8=\E[5n, u9=\E[0n,
14740 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
14741 # Data General 605x
14742 # Ought to work for a Model 6242, Type D210 as well as a 605x.
14743 # Note that the cursor-down key transmits ^Z. Job control users, beware!
14744 # This also matches a posted description of something called a `Dasher 100'
14745 # so there's a dg100 alias here.
14746 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
14747 dg6053-old|dg100|data general 6053,
14750 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
14751 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
14752 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
14753 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
14754 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
14755 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
14758 # (Some performance can be gained over the generic DG terminal type)
14759 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
14761 home=\020\0\0, ll=^P\0^W, use=dg-generic,
14763 # Like 6053, but adds reverse video and more keypad and function keys.
14764 d200|d200-dg|Data General DASHER D200,
14765 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
14766 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14767 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
14768 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
14770 # DASHER D210 series terminals in ANSI mode.
14771 # Reverse video, no insert/delete character/line, 7 bits/character only.
14773 # Initialization string 1 sets:
14774 # <0 - scrolling enabled
14775 # <1 - blink enabled
14776 # <4 - print characters regardless of attributes
14777 d210|d214|Data General DASHER D210 series,
14780 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
14781 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14782 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14783 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
14784 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
14785 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
14786 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
14788 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
14790 # DASHER D210 series terminals in DG mode.
14791 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
14792 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
14794 ed=^^FF, use=d200-dg,
14796 # DASHER D211 series terminals in ANSI mode.
14797 # Like the D210, but with 8-bit characters and local printer support.
14799 # Initialization string 2 sets:
14801 # 2;1 - 8 bit operations
14802 # 1;1 - 8 bit (international) keyboard language
14803 # \E(B - default primary character set (U.S. ASCII)
14804 # \E)4 - default secondary character set (international)
14805 # ^O - primary character set
14807 d211|d215|Data General DASHER D211 series,
14809 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
14812 # Initialization string 2 sets:
14814 # 2;0 - 7 bit operations
14815 # 1;0 - 7 bit (native) keyboard language
14816 # \E(0 - default character set (the keyboard native language)
14817 # ^O - primary character set
14818 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
14820 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
14822 # Like the D210 series, but adds support for 8-bit characters.
14824 # Reset string 2 sets:
14825 # ^^N - secondary character set
14826 # ^^FS0> - 8 bit international character set
14827 # ^^O - primary character set
14828 # ^^FS00 - default character set (matching the native keyboard language)
14830 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
14832 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
14834 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
14837 # Enhanced DG mode with changes to be more UNIX compatible.
14838 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
14841 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
14842 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
14843 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
14844 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
14845 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
14846 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
14847 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
14848 rs2=\036N\036FS0E\036O\036FS00,
14849 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
14850 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
14852 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
14853 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
14854 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
14856 is3=^^Fz2, use=d216+,
14858 d217-unix|Data General DASHER D217 in DG-UNIX mode,
14860 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
14863 # DASHER D220 color terminal in ANSI mode.
14864 # Like the D470C but with fewer colors and screen editing features.
14866 # Initialization string 1 sets:
14868 # <0 - scrolling enabled
14869 # <1 - blink enabled
14870 # <4 - print characters regardless of attributes
14871 # \E[m - all attributes off
14872 # Reset string 1 sets:
14873 # \Ec - initial mode defaults (RIS)
14875 d220|Data General DASHER D220,
14877 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14878 use=dg+color8, use=d470c,
14880 d220-7b|Data General DASHER D220 in 7 bit mode,
14882 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14883 use=dg+color8, use=d470c-7b,
14885 # Initialization string 3 sets:
14886 # - default cursor (solid rectangle)
14887 # Reset string 2 sets:
14888 # ^^N - secondary character set
14889 # ^^FS0> - 8 bit international character set
14890 # ^^O - primary character set
14891 # ^^FS00 - default character set (matching the native keyboard language)
14893 d220-dg|Data General DASHER D220 color terminal in DG mode,
14895 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
14896 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14899 # DASHER D230C color terminal in ANSI mode.
14900 # Like the D220 but with minor ANSI compatibility improvements.
14902 d230c|d230|Data General DASHER D230C,
14903 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
14904 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14905 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
14906 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
14907 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14908 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14909 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14911 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14914 # DASHER D400/D450 series terminals.
14915 # These add intelligent features like insert/delete to the D200 series.
14917 # Initialization string 2 sets:
14918 # ^^FQ2 - default cursor (solid rectangle)
14919 # ^^FW - character protection disabled
14920 # ^^FJ - normal (80 column) mode
14921 # ^^F\^ - horizontal scrolling enabled (for alignment)
14922 # ^^FX004? - margins at columns 0 and 79
14923 # ^^F] - horizontal scrolling disabled
14924 # ^^O - primary character set
14925 # ^^FS00 - default character set (the keyboard native language)
14926 # - (should reset scrolling regions, but that glitches the screen)
14927 # Reset string 1 sets:
14928 # ^^FA - all terminal defaults except scroll rate
14929 # Reset string 2 sets:
14930 # ^^F] - horizontal scrolling disabled
14931 # ^^FT0 - jump scrolling
14933 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14935 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
14936 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
14937 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
14938 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
14940 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
14942 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14943 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14944 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
14947 # DASHER D410/D460 series terminals in ANSI mode.
14948 # These add a large number of intelligent terminal features.
14950 # Initialization string 1 sets:
14952 # <0 - scrolling enabled
14953 # <1 - blink enabled
14954 # <2 - horizontal scrolling enabled (for alignment)
14955 # <4 - print characters regardless of attributes
14956 # \E[5;0v - normal (80 column) mode
14957 # \E[1;1;80w - margins at columns 1 and 80
14959 # 1 - print all characters even if protected
14960 # 6 - character protection disabled
14961 # <2 - horizontal scrolling disabled
14962 # - (should reset scrolling regions, but that glitches the screen)
14964 # Initialization string 2 sets:
14966 # 3;2 - default cursor (solid rectangle)
14967 # 2;1 - 8 bit operations
14968 # 1;1 - international keyboard language
14969 # \E(B - default primary character set (U.S. ASCII)
14970 # \E)4 - default secondary character set (international)
14971 # ^O - primary character set
14973 # Reset string 1 sets:
14974 # \Ec - initial mode defaults (RIS)
14975 # \E[<2h - horizontal scrolling disabled
14977 # Reset string 2 sets:
14979 # 4;0 - jump scrolling
14980 # 2;1 - 8 bit operations
14981 # 1;1 - 8 bit (international) keyboard language
14982 # \E(B - default primary character set (U.S. ASCII)
14983 # \E)4 - default secondary character set (international)
14985 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14987 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14988 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14989 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14990 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14991 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14992 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14993 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14994 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
14995 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14996 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14998 # Initialization string 2 sets:
15000 # 3;2 - default cursor (solid rectangle)
15001 # 2;0 - 7 bit operations
15002 # 1;0 - 7 bit (native) keyboard language
15003 # \E(0 - default character set (the keyboard native language)
15004 # ^O - primary character set
15006 # Reset string 2 sets:
15008 # 4;0 - jump scrolling
15009 # 2;0 - 7 bit operations
15010 # 1;0 - 7 bit (native) keyboard language
15011 # \E(0 - default character set (the keyboard native language)
15013 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
15015 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
15016 rs2=\E[4;0;2;0;1;0v\E(0,
15017 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1
15018 %p5%|%t2;%;m%?%p9%t\016%e\017%;,
15019 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
15021 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
15023 enacs@, rmacs=\036FS00,
15024 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15025 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
15027 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
15030 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15032 # Initialization string 1 sets:
15034 # <0 - scrolling enabled
15035 # <1 - blink enabled
15036 # <2 - horizontal scrolling enabled (for alignment)
15037 # <4 - print characters regardless of attributes
15038 # \E[5;1v - compressed (135 column) mode
15039 # \E[1;1;126 - margins at columns 1 and 126
15041 # 1 - print all characters even if protected
15042 # 6 - character protection disabled
15043 # <2 - horizontal scrolling disabled
15044 # - (should reset scrolling regions, but that glitches the screen)
15046 # Reset string 1 sets:
15047 # \Ec - initial mode defaults (RIS)
15048 # \E[5;1v - compressed (135 column) mode
15049 # \E[1;1;126w - margins at columns 1 and 126
15050 # \E[<2h - horizontal scrolling disabled
15052 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15054 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15055 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15057 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15059 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15060 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15062 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15065 # These add intelligent features like scrolling regions.
15066 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15067 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
15068 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15069 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15070 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15072 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15073 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
15074 vpa=\036FPFF%p1%2.2X,
15075 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15076 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15078 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15080 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15082 rs2=\036P@1\036FK\036FX0083,
15083 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15084 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15086 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15089 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15090 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15092 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15094 clear=\036FG\036PH, fsl=\036F}01\022,
15095 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15096 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15097 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15098 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15101 # Relative cursor motions are confined to the current window,
15102 # which is not what the scrolling region specification expects.
15103 # Thus, relative vertical cursor positioning must be deleted.
15104 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15105 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15107 cud1@, cuu1@, ll@, use=d462+,
15109 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15111 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15113 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15115 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15117 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15120 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15122 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15124 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15126 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15128 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15131 d430c-dg|d430-dg|Data General D430C in DG mode,
15132 use=d413-dg, use=dg+fixed,
15133 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15134 use=d413-dg, use=dg+ccc,
15136 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15137 use=d413-unix, use=dgunix+fixed,
15138 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15139 use=d413-unix-w, use=dgunix+fixed,
15140 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15141 use=d413-unix-25, use=dgunix+fixed,
15142 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15143 use=d413-unix-s, use=dgunix+fixed,
15144 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15145 use=d413-unix-sr, use=dgunix+fixed,
15146 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15147 use=d413-unix, use=dgunix+ccc,
15148 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15149 use=d413-unix-w, use=dgunix+ccc,
15150 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15151 use=d413-unix-25, use=dgunix+ccc,
15152 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15153 use=d413-unix-s, use=dgunix+ccc,
15154 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15155 use=d413-unix-sr, use=dgunix+ccc,
15157 # DASHER D470C color terminal in ANSI mode.
15158 # Like the D460 but with 16 colors and without a compressed mode.
15160 # Initialization string 1 sets:
15162 # <0 - scrolling enabled
15163 # <1 - blink enabled
15164 # <2 - horizontal scrolling enabled (for alignment)
15165 # <4 - print characters regardless of attributes
15166 # \E[1;1;80w - margins at columns 1 and 80
15168 # 1 - print all characters even if protected
15169 # 6 - character protection disabled
15170 # <2 - horizontal scrolling disabled
15171 # - (should reset scrolling regions, but that glitches the screen)
15173 d470c|d470|Data General DASHER D470C,
15174 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15175 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15176 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15177 use=dg+color, use=d460,
15179 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15180 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15181 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15182 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15183 use=dg+color, use=d460-7b,
15185 # Initialization string 2 sets:
15186 # ^^FQ2 - default cursor (solid rectangle)
15187 # ^^FW - character protection disabled
15188 # ^^F\^ - horizontal scrolling enabled (for alignment)
15189 # ^^FX004? - margins at columns 0 and 79
15190 # ^^F] - horizontal scrolling disabled
15191 # ^^O - primary character set
15192 # ^^FS00 - default character set (the keyboard native language)
15193 # - (should reset scrolling regions, but that glitches the screen)
15195 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15196 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15198 use=dgmode+color, use=d460-dg,
15200 # DASHER D555 terminal in ANSI mode.
15201 # Like a D411, but has an integrated phone.
15202 d555|Data General DASHER D555,
15204 d555-7b|Data General DASHER D555 in 7-bit mode,
15206 d555-w|Data General DASHER D555 in wide mode,
15208 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15210 d555-dg|Data General DASHER D555 series in DG mode,
15213 # DASHER D577 terminal in ANSI mode.
15214 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15215 d577|Data General DASHER D577,
15217 d577-7b|Data General DASHER D577 in 7-bit mode,
15219 d577-w|Data General DASHER D577 in wide mode,
15221 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15224 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15227 # DASHER D578 terminal.
15228 # Like a D577, but without compressed mode; like a D470C in this respect.
15230 # Initialization string 1 sets:
15232 # <0 - scrolling enabled
15233 # <1 - blink enabled
15234 # <2 - horizontal scrolling enabled (for alignment)
15235 # <4 - print characters regardless of attributes
15236 # \E[1;1;80w - margins at columns 1 and 80
15238 # 1 - print all characters even if protected
15239 # 6 - character protection disabled
15240 # <2 - horizontal scrolling disabled
15241 # - (should reset scrolling regions, but that glitches the screen)
15243 d578|Data General DASHER D578,
15244 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15245 d578-7b|Data General DASHER D578 in 7-bit mode,
15246 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15248 #### Datamedia (dm)
15250 # Datamedia was headquartered in Nashua, New Hampshire until it went
15251 # out of business in 1993, but the ID plates on the terminals referred
15252 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15253 # manufacturer which threw out all information about the terminals.
15256 cs10|colorscan|Datamedia Color Scan 10,
15259 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
15260 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15261 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15262 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15263 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15264 cs10-w|Datamedia Color Scan 10 with 132 columns,
15266 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15268 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15269 dm1520|dm1521|datamedia 1520,
15271 cols#80, it#8, lines#24,
15272 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
15273 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15274 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
15276 # dm2500: this terminal has both <ich> and <smir>. Applications using
15277 # termcap/terminfo directly (rather than through ncurses) might be confused.
15278 dm2500|datamedia2500|datamedia 2500,
15281 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
15282 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15283 dch1=\020\010\030\035$<10*>,
15284 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15285 ich1=\020\034\030\035$<10*>,
15286 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
15287 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15288 smdc=^P, smir=^P, smso=^N,
15289 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
15290 # also, has a meta-key.
15291 # From: <goldberger@su-csli.arpa>
15292 # (dmchat: ":MT:" changed to ":km:" -- esr)
15293 dmchat|dmchat version of datamedia 2500,
15295 dl1=\020\032\030\035$<2/>,
15296 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
15297 # (dm3025: ":MT:" changed to ":km:" -- esr)
15298 dm3025|datamedia 3025a,
15300 cols#80, it#8, lines#24,
15301 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15302 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
15303 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
15304 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
15305 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
15306 smir=\EP, smso=\EO1,
15307 dm3045|datamedia 3045a,
15308 OTbs, am, eo, km@, ul, xenl,
15309 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
15310 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
15311 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
15312 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
15314 # Datamedia DT80 soft switches:
15315 # 1 0=Jump 1=Smooth
15316 # Autorepeat 0=off 1=on
15317 # Screen 0=Dark 1=light
15318 # Cursor 0=u/l 1=block
15320 # 2 Margin Bell 0=off 1=on
15321 # Keyclick 0=off 1=on
15322 # ANSI/VT52 0=VT52 1=ANSI
15323 # Xon/Xoff 0=Off 1=On
15325 # 3 Shift3 0=Hash 1=UK Pound
15327 # Newline 0=Off 1=On
15328 # Interlace 0=Off 1=On
15330 # 4 Parity 0=Odd 1=Even
15331 # Parity 0=Off 1=On
15332 # Bits/Char 0=7 1=8
15333 # Power 0=60Hz 1=50Hz
15335 # 5 Line Interface 0=EIA 1=Loop
15336 # Aux Interface 0=EIA 1=Loop
15337 # Local Copy 0=Off 1=On
15340 # 6 Aux Parity 0=Odd 1=Even
15341 # Aux Parity 0=Off 1=On
15342 # Aux Bits/Char 0=7 1=8
15343 # CRT Saver 0=Off 1=On
15344 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
15345 dm80|dmdt80|dt80|datamedia dt80/1,
15346 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
15347 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15348 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
15349 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15351 # except in 132 column mode, where it needs a little padding.
15352 # This is still less padding than the vt100, and you can always turn on
15353 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
15355 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
15357 clear=\E[H\E[2J$<50/>, cud1=\n,
15358 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
15359 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
15360 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
15361 dt80-sas|Datamedia DT803/DTX for SAS usage,
15364 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
15365 bel=^G, clear=^L, cr=\r,
15366 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
15367 cub1=^H, cud1=\EB, cuf1=^\,
15368 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
15369 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
15370 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
15371 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
15372 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
15373 smso=\E$2\004, tbc=\E'0,
15375 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
15376 # These aren't end-all Excel termcaps; but do insert/delete char/line
15377 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
15378 # The naming convention has been bent somewhat, with the use of E? (where
15379 # E is for 'Excel') as # a name. This was done to distinguish the entries
15380 # from the other Datamedias in use here, and yet to associate a model of
15381 # the Excel terminals with the regular datamedia terminals that share
15382 # major characteristics.
15383 excel62|excel64|datamedia Excel 62,
15384 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15385 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15387 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
15388 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15389 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15391 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
15392 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
15393 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
15394 smir=\E[4h, use=dt80,
15398 # Falco Data Products
15399 # 440 Potrero Avenue
15400 # Sunnyvale, CA 940864-196
15401 # Vox: (800)-325-2648
15402 # Fax: (408)-745-7860
15403 # Net: techsup@charm.sys.falco.com
15405 # Current Falco models as of 1995 are generally ANSI-compatible and support
15406 # emulations of DEC VT-series, Wyse, and Televideo types.
15409 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
15410 # This terminal was released around 1983 and was discontinued long ago.
15411 # The standout and underline highlights are the same.
15412 falco|ts1|ts-1|falco ts-1,
15414 cols#80, it#8, lines#24,
15415 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15416 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15417 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
15418 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
15419 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
15420 smir=\Eq, smso=\Eg1, smul=\Eg1,
15421 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
15422 OTbs, am, da, db, mir, msgr, ul,
15423 cols#80, it#8, lines#24,
15424 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
15425 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
15426 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
15427 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
15428 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
15429 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
15430 smso=\Eg4, smul=\Eg1,
15431 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
15432 ts100|ts100-sp|falco ts100-sp,
15433 am, mir, msgr, xenl, xon,
15434 cols#80, it#8, lines#24, vt#3,
15435 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15436 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15437 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15438 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15439 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15440 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15441 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
15442 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
15443 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
15444 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15445 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15446 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15447 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15448 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
15449 %;m%?%p9%t\016%e\017%;$<2>,
15450 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15451 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15453 ts100-ctxt|falco ts-100 saving context,
15454 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
15456 #### Florida Computer Graphics
15459 # Florida Computer Graphics Beacon System, using terminal emulator program
15460 # "host.com", as provided by FCG. This description is for an early release
15461 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
15464 # From: David Bryant <cbosg!djb> 1/7/83
15465 beacon|FCG Beacon System,
15468 bel=\ESTART\r\E37\r\EEND\r$<1>,
15469 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
15470 cub1=^H, cud1=\n, cuf1=\EV,
15471 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
15472 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
15473 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
15474 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
15475 rmul=\ESTART\r\E60\,0\r\EEND\r,
15476 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
15477 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
15478 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
15479 smul=\ESTART\r\E60\,1\r\EEND\r,
15484 # The f1720a differences from ANSI: no auto margin, destructive
15485 # tabs, # of lines, funny highlighting and underlining
15486 f1720|f1720a|fluke 1720A,
15488 cols#80, lines#16, xmc#1,
15489 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
15490 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
15491 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
15492 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15493 smso=\E[7m, smul=\E[4m,
15495 #### Liberty Electronics (Freedom)
15497 # Liberty Electronics
15498 # 48089 Fremont Blvd
15500 # Vox: (510)-623-6000
15501 # Fax: (510)-623-7021
15503 # From: <faletti@berkeley.edu>
15504 # (f100: added empty <acsc> to suppress a tic warning;
15505 # made this relative to adm+sgr -- note that <invis> isn't
15506 # known to work for f100 but does on the f110. --esr)
15507 f100|freedom|freedom100|freedom model 100,
15508 OTbs, am, bw, hs, mir, msgr, xon,
15510 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
15511 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15512 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
15513 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
15514 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
15515 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
15516 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
15517 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15518 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
15519 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
15520 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15521 f100-rv|freedom-rv|freedom 100 in reverse video,
15522 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
15523 # The f110 and f200 have problems with vi(1). They use the ^V
15524 # code for the down cursor key. When kcud1 is defined in terminfo
15525 # as ^V, the Control Character Quoting capability (^V in insert mode)
15526 # is lost! It cannot be remapped in vi because it is necessary to enter
15527 # a ^V to to quote the ^V that is being remapped!!!
15529 # f110/f200 users will have to decide whether
15530 # to lose the down cursor key or the quoting capability. We will opt
15531 # initially for leaving the quoting capability out, since use of VI
15532 # is not generally applicable to most interactive applications
15533 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
15534 f110|freedom110|Liberty Freedom 110,
15537 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
15538 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
15539 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
15540 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15541 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
15542 smso=\EG<, tsl=\Ef, use=f100,
15543 f110-14|Liberty Freedom 110 14inch,
15545 f110-w|Liberty Freedom 110 - 132 cols,
15546 cols#132, use=f110,
15547 f110-14w|Liberty Freedom 110 14in/132 cols,
15550 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15551 f200|freedom200|Liberty Freedom 200,
15552 OTbs, am, eslok, hs, mir, msgr, xon,
15553 cols#80, it#8, lines#24, wsl#80,
15554 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
15555 clear=^Z, cnorm=\E.1, cr=\r,
15556 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
15557 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15558 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
15559 flash=\Eo$<200/>\En, fsl=\r, home=^^,
15560 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
15561 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
15562 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15563 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15564 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15565 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
15566 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15567 f200-w|Liberty Freedom 200 - 132 cols,
15568 cols#132, use=f200,
15569 # The f200 has the ability to reprogram the down cursor key. The key is
15570 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
15571 # so powering the terminal off and on will not cause the change to be lost.
15572 f200vi|Liberty Freedom 200 for vi,
15573 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
15574 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
15575 cols#132, use=f200vi,
15579 # Graphon Corporation
15580 # 544 Division Street
15581 # Campbell, CA 95008
15582 # Vox: (408)-370-4080
15583 # Fax: (408)-370-5047
15584 # Net: troy@graphon.com (Troy Morrison)
15587 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
15588 # including one odd hybrid that starts out life on power-up as a character
15589 # terminal, than can be switched to X graphics mode (driven over the serial
15590 # line) by an escape sequence. No info on this beast yet.
15591 # (go140: I added <rmam>/<smam> based on the init string -- esr)
15592 go140|graphon go-140,
15594 cols#80, it#8, lines#24,
15595 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
15596 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15597 ed=\E[J$<10/>, el=\E[K, ht=^I,
15598 if=/usr/share/tabset/vt100, il1=\E[L,
15599 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15600 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
15601 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
15602 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
15603 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
15604 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15605 go140w|graphon go-140 in 132 column mode,
15608 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15610 # Hacked up vt200 termcap to handle GO-225/VT220
15611 # From: <edm@nwnexus.WA.COM>
15612 # (go225: I added <rmam>/<smam> based on the init string -- esr)
15613 go225|go-225|Graphon 225,
15614 OTbs, am, mir, xenl,
15615 cols#80, it#8, lines#25, vt#3,
15616 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
15617 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
15618 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15619 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
15620 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
15621 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15622 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
15623 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
15624 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
15625 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
15626 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
15627 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
15629 #### Harris (Beehive)
15631 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
15632 # Their terminal group is ancient history now (1995) though the parent
15633 # company is still in business.
15636 # Beehive documentation is undated and marked Preliminary and has no figures
15637 # so we must have early Superbee2 (Model 600, according to phone conversation
15638 # with mfr.). It has proved reliable except for some missing padding
15639 # (notably after \EK and <nl> at bottom of screen).
15641 # The key idea is that AEP mode is poison for <cup> & that US's in
15642 # the local memory should be avoided like the plague. That means
15643 # that the 2048 character local buffer is used as 25 lines of 80
15644 # characters, period. No scrolling local memory, folks. It also
15645 # appears that we cannot use naked INS LINE feature since it uses
15646 # US. The sbi fakes <il1> with an 80-space insert that may be too
15647 # slow at low speeds; also spaces get converted to \040 which is
15648 # too long for some programs (not vi). DEL LINE is ok but slow.
15650 # The <nl> string is designed for last line of screen ONLY; cup to
15651 # 25th line corrects the motion inherent in scrolling to Page 1.
15653 # There is one understood bug. It is that the screen appears to
15654 # pop to a new (blank) page after a <nel>, or leave a half-line
15655 # ellipsis to a quad that is the extra 48 memory locations. The
15656 # data received is dumped into memory but not displayed. Not to
15657 # worry if <cup> is being used; the lines not displayed will be,
15658 # whenever the cursor is moved up there. Since <cup> is addressed
15659 # relative to MEMORY of window, nothing is lost; but beware of
15660 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
15661 # therefore, is setenv MORE -c .
15663 # WARNING: Not all features tested.
15665 # Timings are assembled from 3 sources. Some timings may reflect
15666 # SB2/Model 300 that were used if more conservative.
15667 # Tested on a Model 600 at 1200 and 9600 bd.
15669 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
15670 # placed on the keyboard and useless because of AEP, is made
15671 # into a backspace key. In use ESC must be pressed twice (to send)
15672 # and sending ^C must be prefixed by ESC to avoid that weird
15673 # transmit mode associated with ENTER key.
15675 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
15676 # the screen, then it has dropped into ENTER mode; hit
15677 # RESET--ONLINE--!tset.
15679 # As delivered this machine has a FATAL feature that will throw
15680 # it into that strange transmit state (SPOW) if the space bar is
15681 # hit after a CR is received, but before receiving a LF (or a
15684 # The circuits MUST be modified to eliminate the SPOW latch.
15685 # This is done by strapping on chip A46 of the I/O board; cut
15686 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
15687 # chip. This mod has been checked out on a Mod 600 of Superbee II.
15688 # With this modification absurdly high timings on cr are
15691 # NOTE WELL that the rear panel switch should be set to CR/LF,
15694 sb1|beehive superbee,
15695 OTbs, am, bw, da, db, mir, ul, xsb,
15696 cols#80, lines#25, xmc#1,
15697 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
15698 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
15699 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
15700 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
15701 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15702 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15703 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15704 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
15705 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
15706 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
15707 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
15708 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
15709 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
15710 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
15711 smso=\E_1, smul=\E_0, tbc=\E3,
15712 sbi|superbee|beehive superbee at Indiana U.,
15714 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
15716 # Alternate (older) description of Superbee - f1=escape, f2=^C.
15717 # Note: there are at least 3 kinds of superbees in the world. The sb1
15718 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
15719 # The sb3 puts garbage on the bottom of the screen when you scroll with
15720 # the switch in the back set to CRLF instead of AEP. This description
15721 # is tested on the sb2 but should work on all with either switch setting.
15722 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
15723 # the other two if you want to try to hit that tiny escape key.
15724 # This description is tricky: being able to use cup depends on there being
15725 # 2048 bytes of memory and the hairy <nl> string.
15726 superbee-xsb|beehive super bee,
15728 cols#80, it#8, lines#25,
15729 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
15730 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
15731 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
15732 home=\EH, ht=^I, hts=\E1,
15733 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
15734 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
15735 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
15736 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
15737 # This loses on lines > 80 chars long, use at your own risk
15738 superbeeic|super bee with insert char,
15739 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
15740 sb2|sb3|fixed superbee,
15741 xsb@, use=superbee,
15743 #### Beehive Medical Electronics
15745 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
15746 # Regarding your question though; Beehive terminals weren't made by Harris.
15747 # They were made by Beehive Medical Electronics in Utah. They went out of
15748 # business in the early '80s.
15750 # (OK, then, I don't know why a couple of these say "harris beehive".)
15753 # Reports are that most of these Beehive entries (except superbee) have not
15754 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
15756 # (bee: <ich1> was empty, which is obviously bogus -- esr)
15757 beehive|bee|harris beehive,
15760 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
15761 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
15762 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
15763 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15764 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
15765 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
15766 smir=\EQ, smso=\EdP, smul=\Ed`,
15767 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
15768 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
15769 # look at those spaces in <rmso>/<smso>. Seems strange to me...
15770 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
15771 # really care, cook up one using ^F -- esr)
15772 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
15774 cols#80, it#8, lines#20,
15775 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
15776 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
15777 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
15778 beehive4|bh4|beehive 4,
15781 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
15782 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
15783 # There was an early Australian kit-built computer called a "Microbee".
15784 # It's not clear whether this is for one of those or for a relative
15786 microb|microbee|micro bee series,
15788 cols#80, it#8, lines#24,
15789 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15790 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15791 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15792 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
15793 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
15794 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
15796 # 8675, 8686, and bee from Cyrus Rahman
15797 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
15798 ha8675|harris 8675,
15799 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
15800 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
15801 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
15803 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
15805 ha8686|harris 8686,
15806 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
15807 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
15808 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
15810 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
15811 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
15812 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
15813 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
15817 # Hazeltine appears to be out of the terminal business as of 1995. These
15818 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
15819 # Harris. They have a hazeltine.com domain (but no web page there ) and can
15823 # 450 East Pulaski Road
15824 # Greenlawn, New York 11740
15826 # As late as 1993, manuals for the terminal product line could still be
15829 # TRW Customer Service Division
15832 # Fairfield, NJ 07007-2078
15834 # They're now (1998) a subsidiary of General Electric, operating under the
15835 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
15836 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
15839 # Since <cuf1> is blank, when you want to erase something you
15840 # are out of luck. You will have to do ^L's a lot to
15841 # redraw the screen. h1000 is untested. It doesn't work in
15842 # vi - this terminal is too dumb for even vi. (The code is
15843 # there but it isn't debugged for this case.)
15844 hz1000|hazeltine 1000,
15847 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
15849 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
15850 hz1420|hazeltine 1420,
15853 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
15854 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
15855 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
15857 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
15858 # freakout with out-of-range args and tn3270. No hz since it needs to
15860 hz1500|hazeltine 1500,
15863 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15864 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
15865 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
15866 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
15867 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
15868 # h1510 assumed to be in sane escape mode. Else use h1500.
15869 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
15870 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
15871 # removed incorrect and overridden ":do=^J:" -- esr)
15872 hz1510|hazeltine 1510,
15875 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
15876 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
15877 el=\E^O, il1=\E^Z, ind=\n,
15879 # The following switch settings are assumed for normal operation:
15880 # FULL CR U/L_CASE ESCAPE
15881 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
15882 # Other switches may be set for operator convenience or communication
15884 hz1520|Hazeltine 1520,
15885 OTbs, am, bw, msgr,
15887 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
15888 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15889 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
15890 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
15891 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
15892 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
15893 # This version works with the escape switch off
15894 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
15895 hz1520-noesc|hazeltine 1520,
15898 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15899 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
15900 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
15901 # Note: the h1552 appears to be the first Hazeltine terminal which
15902 # is not braindamaged. It has tildes and backprimes and everything!
15903 # Be sure the auto lf/cr switch is set to cr.
15904 hz1552|hazeltine 1552,
15906 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15907 lf2=red, lf3=green, use=vt52,
15908 hz1552-rv|hazeltine 1552 reverse video,
15909 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
15910 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15911 hz2000|hazeltine 2000,
15914 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
15915 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15916 il1=~\032$<6>, ind=\n, pad=^?,
15917 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15918 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15919 # to work ok. There is one problem though if one types a lot of garbage
15920 # characters very fast vi seems not able to keep up and hangs while trying
15921 # to insert. That's in insert mode while trying to insert in the middle of
15922 # a line. It might be because the Esprit doesn't have insert char and delete
15923 # char as a built in function. Vi has to delete to end of line and then
15924 # redraw the rest of the line.
15925 esprit|Hazeltine Esprit I,
15928 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
15929 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15930 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
15931 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
15932 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
15933 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
15934 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15935 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15936 esprit-am|hazeltine esprit auto-margin,
15938 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15939 # Vi it seems always wants to send a control J for "do" and it turned out
15940 # that the terminal would work somewhat if the auto LF/CR was turned off.
15941 # (hmod1: removed :dn=~^K: -- esr)
15942 hmod1|Hazeltine Modular 1,
15945 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15946 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15947 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15948 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15950 # Hazeltine Executive 80 Model 30 (1554?)
15951 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15952 # Like VT100, except for different "am" behavior.
15953 hazel|exec80|h80|he80|Hazeltine Executive 80,
15955 cols#80, it#8, lines#24, vt#3,
15956 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15957 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15958 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
15959 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15960 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15961 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15962 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15963 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15964 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15965 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15966 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15967 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15973 ibm327x|line mode IBM 3270 style,
15975 clear=\r\n, el=\r, home=\r,
15977 ibm3101|i3101|IBM 3101-10,
15980 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15981 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15982 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
15983 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
15984 ibm3151|IBM 3151 display,
15985 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15986 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
15987 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
15988 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15989 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15990 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15991 # removed kend, knp, kpp -TD
15993 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15994 # Added ich1 (kich1 without ich1 doesn't make sense).
15995 # Added il1 (kil1 without il1 doesn't make sense).
15996 # Added xon (terminal uses XON/XOFF flow control).
15998 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
15999 OTbs, am, mir, msgr, xon,
16000 cols#80, it#8, lines#24,
16001 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
16003 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
16004 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16005 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16006 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
16007 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16008 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
16009 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
16010 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
16011 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
16012 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
16013 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
16014 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
16015 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
16016 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
16017 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16018 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16019 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
16020 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
16022 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
16023 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
16025 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16026 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
16029 ibm3162|IBM 3162 display,
16030 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16031 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16034 # This really should not use setab/setaf, but it is clear that the
16035 # original terminfo does not toggle red/blue colors as in setb/setf.
16036 ibm3164|i3164|IBM 3164,
16038 colors#8, pairs#64,
16039 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16040 setab=\E4 %p1%{64}%+%c,
16041 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16042 smcup=\E!9/N\E>B, use=ibm3161,
16044 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16046 cols#80, it#8, lines#25,
16047 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16049 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16050 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16051 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16052 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16053 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16054 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16055 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16056 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16057 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16058 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16059 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16060 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16061 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16062 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16063 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16064 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16065 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16066 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16067 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16068 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16069 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16070 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16071 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16073 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16075 ibmaed|IBM Experimental display,
16076 OTbs, am, eo, msgr,
16077 cols#80, it#8, lines#52,
16078 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16079 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16080 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16081 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16082 rmso=\E0, sgr0=\E0, smso=\E0,
16083 ibm-apl|apl|IBM apl terminal simulator,
16084 lines#25, use=dm1520,
16085 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16086 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16087 ibmmono|IBM workstation monochrome,
16089 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16090 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16091 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16092 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16093 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16094 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16096 ibmega|IBM Enhanced Color Display,
16097 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16098 nel=\r\n, use=ibmmono,
16099 # This color scheme is assumed in some recent IBM terminal descriptions
16100 # (green on black, emulated on a 16-color terminal).
16101 ibm+color|IBM color definitions,
16102 colors#8, ncv#3, pairs#64,
16104 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16105 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16106 %=%t46m%e%p1%{7}%=%t107m%;,
16107 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16108 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16109 %=%t36m%e%p1%{7}%=%t97m%;,
16110 ibm+16color|IBM aixterm color definitions,
16111 colors#16, pairs#256,
16112 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16113 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16114 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16115 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16116 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16117 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16118 ibm5154|IBM 5154 Color display,
16119 colors#8, ncv@, pairs#64,
16120 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16122 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16123 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16125 ibmvga-c|IBM VGA display color termcap,
16126 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16127 nel=\r\n, use=ibmega-c,
16128 ibmvga|IBM VGA display,
16129 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16130 nel=\r\n, use=ibmega,
16131 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16132 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16134 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16135 ibm6155|IBM 6155 Black & White display,
16136 blink@, bold@, use=ibm5151,
16137 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16138 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16140 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16141 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16143 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16145 ibm6154|IBM 6154 Color displays,
16146 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16147 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16149 sgr0=\E[0;10m, use=ibm5154,
16150 ibm6153|IBM 6153 Black & White display,
16151 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16152 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16154 sgr0=\E[0;10m, use=ibm5151,
16155 ibm6153-90|IBM 6153 Black & White display,
16157 blink@, bold@, use=ibm5151,
16158 ibm6153-40|IBM 6153 Black & White display,
16159 cols#40, lines#12, use=ibm6153-90,
16160 ibm8512|ibm8513|IBM color VGA Terminal,
16162 cols#80, it#8, lines#25,
16163 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16164 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
16165 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16166 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16167 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16168 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16169 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16170 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16171 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16172 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16173 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16174 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16175 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16177 hft-c|HFT with Color,
16178 colors#8, pairs#64,
16179 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16180 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16181 use=ibm5151, use=ibm+color,
16182 hft-c-old|HFT with Color PC850,
16183 colors#8, pairs#64,
16184 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16186 hft-old|AIWS High Function Terminal,
16189 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16190 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16191 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16192 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
16193 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16194 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16195 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16196 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16197 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16198 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16199 ibm-system1|system1|ibm system/1 computer,
16202 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16203 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16205 # lft-pc850 : IBM Low Function Terminal Device
16206 # lft "supports" underline, bold, and blink in the sense that the lft code
16207 # sets all the right bits. HOWEVER, depending upon the adapter, these
16208 # attributes may or may not be supported by the device driver.
16209 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16211 cols#80, it#8, lines#25,
16212 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16214 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16215 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16216 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16217 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16218 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16219 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16220 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16221 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16222 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16223 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16224 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16225 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16226 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16227 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16228 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16229 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16230 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16231 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16232 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16233 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16234 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16235 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16236 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16237 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16238 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16240 # "Megapel" refers to the display adapter, which was used with the IBM RT
16242 ibm5081|hft|IBM Megapel Color display,
16243 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16244 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16245 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16248 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16250 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16252 ibm8514|IBM 8514/a color VGA display,
16254 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16255 ibm8514-c|IBM 8514 color display with standout and underline,
16258 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
16259 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
16263 # AIX entries. IBM ships these with AIX 3.2.5.
16264 # -- added rc, sc based on manpage -TD
16265 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16266 aixterm|IBM Aixterm Terminal Emulator,
16268 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16269 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
16270 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16271 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16272 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
16273 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16275 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16276 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16277 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16279 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16280 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16282 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16283 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16285 tsl=\E[?%p1%dT, use=ibm6153,
16286 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
16287 acsc@, use=aixterm,
16288 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
16289 acsc@, use=aixterm-m,
16291 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
16292 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
16293 use=ibm+16color, use=aixterm,
16295 #### Infoton/General Terminal Corp.
16298 # gt100 sounds like something DEC would come out with. Let's hope they don't.
16299 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
16302 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16303 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
16304 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
16305 ind=\n, rmso=\Ea, smso=\Eb,
16309 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16310 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
16311 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
16312 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
16313 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
16317 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
16318 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
16319 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
16323 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
16324 ed=^K, ind=\n, ll=^H^\,
16326 # The ICL6402 was actually the Kokusai Display System 6402.
16327 # The 6404 was the KDS7372 (color version of the 6402).
16329 # ICL6404 control codes follow:
16332 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16333 #ctrl-A set SOM position at cursor position
16336 #ctrl-I Horizontal tab
16339 #ctrl-L Cursor right
16340 #ctrl-M Carriage return
16341 #ctrl-N Disable xon/xoff to host
16342 #ctrl-O Enable xon/xoff to host
16343 #ctrl-R Enable bidirectional mode
16344 #ctrl-T Disable bidirectional mode
16345 #ctrl-V Cursor down
16346 #ctrl-Z Clear unprotected data to insert char
16347 #ctrl-^ Cursor home
16350 #ESC lead-in char for multiple character command
16352 #ESC space R execute power on sequence
16353 #ESC ! p1 p2 define scroll region:
16354 # p1 = scroll top line: 20h - 37h
16355 # p1 = scroll bottom line: 20h - 37h
16356 #ESC " unlock keyboard
16357 #ESC # lock keyboard
16358 #ESC $ Semi-graphics mode on
16359 #ESC % Semi-graphics mode off
16360 #ESC & protect mode on
16361 #ESC ' protect mode off
16362 #ESC ( write protect mode off (full intensity)
16363 #ESC ) write protect mode on (half intensity)
16365 #ESC * clear screen
16366 #ESC + clear unprotected data to insert char
16367 #ESC , clear unprotected data to half intensity spaces
16368 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
16369 # p1 = page number 0 - 3
16370 # p2 = row 20h - 7fh
16371 # p3 = column (lo) 20h - 7fh
16372 # p4 = column (hi) 20h - 21h (only 132 col)
16373 #ESC . p1 set cursor style:
16374 # p1 = 0 invisible cursor
16375 # p1 = 1 block blinking cursor
16376 # p1 = 2 block steady cursor
16377 # p1 = 3 underline blinking cursor
16378 # p1 = 4 underline steady cursor
16379 #ESC / transmit cursor location (page, row, column)
16380 #ESC 0 p1 p2 p3 p4 program edit key:
16381 # p1 = edit key code: '@'-'S', '`'-'s'
16382 # p2 p3 p4 = program data (3 bytes)
16385 #ESC 2 clear tab at cursor
16386 #ESC 3 clear all tabs
16387 #ESC 4 send unprotect line to cursor
16388 #ESC 5 send unprotect page to cursor
16389 #ESC 6 send line to cursor
16390 #ESC 7 send page to cursor
16391 #ESC 8 n set scroll mode:
16392 # n = 0 set jump scroll
16393 # n = 1 set smooth scroll
16394 #ESC 9 n control display:
16395 # n = 0 display off
16397 #ESC : clear unprotected data to null
16398 #ESC ; clear unprotected data to insert char
16401 #ESC = p1 p2 address cursor to row, column
16402 # p1 = row 20h - 7fh
16403 # p2 = column (lo) 20h - 7fh
16404 # p3 = column (hi) 20h - 21h (only 132 col)
16405 #ESC > keyclick off
16406 #ESC ? transmit cursor location (row, column)
16408 #ESC @ copy print mode on
16409 #ESC A copy print mode off
16410 #ESC B block mode on
16411 #ESC C block mode off (conversation mode)
16412 #ESC D F set full duplex
16413 #ESC D H set half duplex
16415 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
16416 # 0 = black, 1 = red, 2 = green, 3 = yellow
16417 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
16418 #ESC G n set serial field attribute (n = 30h - 3Fh)
16419 #ESC H n full graphics mode:
16420 # n = 0 exit full graphics mode
16421 # n = 1 enter full graphics mode
16424 #ESC K forward page
16426 #ESC L unformatted page print
16427 #ESC M L move window left (132 col mode only)
16428 #ESC M R move window right (132 col mode only)
16429 #ESC N set page edit (clear line edit)
16430 #ESC O set line edit (clear page edit)
16431 #ESC P formatted page print
16432 #ESC Q character insert
16434 #ESC S send message unprotected only
16435 #ESC T erase line to insert char
16436 #ESC U set monitor mode (see ESC X, ESC u)
16438 #ESC V n select video attribute mode:
16439 # n = 0 serial field attribute mode
16440 # n = 1 parallel character attribute mode
16441 #ESC V 2 n define line attribute:
16442 # n = 0 single width single height
16443 # n = 1 single width double height
16444 # n = 2 double width single height
16445 # n = 3 double width double height
16446 #ESC V 3 n select character font:
16447 # n = 0 system font
16448 # n = 1 user defined font
16449 #ESC V 4 n select screen mode:
16450 # n = 0 page screen mode
16451 # n = 1 virtual screen mode
16452 #ESC V 5 n control mouse mode:
16453 # n = 0 disable mouse
16454 # n = 1 enable sample mode
16455 # n = 2 send mouse information
16456 # n = 3 enable request mode
16457 #ESC W character delete
16458 #ESC X clear monitor mode (see ESC U, ESC u)
16459 #ESC Y erase page to insert char
16461 #ESC Z n send user/status line:
16462 # n = 0 send user line
16463 # n = 1 send status line
16464 # n = 2 send terminal ID
16465 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
16469 # 3 = blink blank (= blank)
16471 # 5 = reverse blank
16472 # 6 = reverse blink
16473 # 7 = reverse blink blank (= reverse blank)
16475 # 9 = underline blank
16476 # : = underline blink
16477 # ; = underline blink blank
16478 # < = reverse underline
16479 # = = reverse underline blank
16480 # > = reverse underline blink
16481 # ? = reverse underline blink blank
16482 # p2, p3: f/grnd, b/grnd colour
16483 # (see ESC F for colours)
16484 # use ZZ for mono, eg.
16485 # ESC [ 0 Z Z for normal
16486 # ESC [ 4 Z Z for inverse etc.
16488 #ESC \ n set page size:
16489 # n = 1 24 lines/page
16490 # n = 2 48 lines/page
16491 # n = 3 72 lines/page
16492 # n = 4 96 lines/page
16493 #ESC ] n set Wordstar mode:
16494 # n = 0 normal (KDS7372) mode
16495 # n = 1 Wordstar mode
16497 #ESC b set foreground colour screen
16499 #ESC c n enter self-test mode:
16500 # n = 0 exit self test mode
16504 # n = 4 screen display test
16505 # n = 5 main/printer port test
16506 # n = 6 mouse port test
16507 # n = 7 graphics board test
16508 # n = 8 graphics memory test
16509 # n = 9 display all 'E'
16510 # n = : display all 'H'
16511 #ESC d set background colour screen
16513 #ESC e n program insert char (n = insert char)
16514 #ESC f text CR load user status line with 'text'
16516 #ESC g display user status line on 25th line
16517 #ESC h display system status line on 25th line
16519 #ESC j reverse linefeed
16520 #ESC k n duplex/local edit mode:
16521 # n = 0 duplex edit mode
16522 # n = 1 local edit mode
16523 #ESC l n select virtual screen:
16526 #ESC m save current config to NVRAM
16527 #ESC n p1 select display screen:
16532 #ESC o p1 p2 set characters/line and attribute:
16533 # p1 = 0 80 chars/line
16535 #ESC o p1 p2 set characters/line and attribute:
16536 # p1 = 0 80 chars/line
16537 # p1 = 1 132 chars/line
16538 # p2 = 0 single width single height
16539 # p2 = 1 single width double height
16540 # p2 = 2 double width single height
16541 # p2 = 3 double width double height
16543 #ESC q insert mode on
16544 #ESC r edit mode on
16545 #ESC s send message all
16546 #ESC t erase line to null
16547 #ESC u clear monitor mode (see ESC U, ESC X)
16548 #ESC v autopage mode on
16549 #ESC w autopage mode off
16550 #ESC x p1 p2 p3 define delimiter code...
16551 #ESC y erase page to null
16553 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
16554 # p1 = starting row
16555 # p2 = starting column
16559 #ESC { p1 p2 p3 p4 configure main port
16560 # (baud, stop bits, parity, word length)
16562 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
16563 # p1 = function key code:
16564 # '1' - ';' normal f1- f11
16565 # '<' - 'F' shifted f1 - f11
16566 # p2 = program mode:
16570 # Ctrl-Y = terminator
16571 # (use Ctrl-P to escape ^P, ^Y )
16573 #ESC } p1 p2 p3 p4 configure printer port
16574 # (baud, stop bits, parity, word length)
16575 #ESC ~ send system status
16577 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
16579 # Entry is by esr going solely on above information and is UNTESTED.
16580 # This actually looks a lot like a Televideo 9xx.
16581 # This entry uses page 0 and is monochrome; I'm not brave enough to try
16582 # to make color work without a test terminal. The <am> capability is a guess.
16583 # The initialization string sets conversation mode, blinking underline cursor,
16584 # full duplex, parallel attribute mode, display user status line, white
16585 # foreground, black background, normal highlight.
16587 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
16590 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
16591 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
16593 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
16594 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
16595 hts=\E1, il1=\EE, invis=\E[1ZZ,
16596 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
16597 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
16598 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
16599 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
16600 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
16601 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
16602 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
16603 rs2=\Eo1, use=icl6404,
16605 #### Interactive Systems Corp
16607 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
16608 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
16609 # bought out by Sun.
16612 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
16613 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
16614 # ":le=^_:" later overridden -- esr)
16615 intext|Interactive Systems Corporation modified owl 1200,
16617 cols#80, it#8, lines#24, xmc#1,
16618 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
16619 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
16620 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
16621 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
16622 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
16623 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
16624 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
16625 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
16627 intext2|intextii|INTERACTIVE modified owl 1251,
16629 cols#80, lines#24, xmc#0,
16630 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
16631 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16632 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
16633 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
16634 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
16635 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
16636 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
16637 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
16638 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
16639 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
16640 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
16643 #### Kimtron (abm, kt)
16645 # Kimtron seems to be history, but as March 1998 these people are still
16646 # offering repair services for Kimtron equipment:
16648 # Com/Pair Monitor Service
16649 # 1105 N. Cliff Ave.
16650 # Sioux Falls, South Dakota 57103
16652 # WATS voice: 1-800/398-4946
16653 # POTS fax: +1 605/338-8709
16654 # POTS voice: +1 605/338-9650
16655 # Email: <compair@sd.cybernex.net>
16656 # Internet/Web: <http://www.com-pair.com>
16658 # Kimtron entries include (undocumented) codes for: enter dim mode,
16659 # enter bold mode, enter reverse mode, turn off all attributes.
16662 # Kimtron ABM 85 added by Dual Systems
16663 # (abm85: removed duplicated ":kd=^J:" -- esr)
16664 abm85|Kimtron ABM 85,
16665 OTbs, am, bw, msgr,
16666 cols#80, it#8, lines#24, xmc#1,
16667 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
16668 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16669 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
16670 if=/usr/share/tabset/stdcrt, il1=\EE,
16671 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
16672 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
16673 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
16674 # Kimtron ABM 85H added by Dual Systems.
16675 # Some notes about the abm85h entries:
16676 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
16677 # firmware revs prior to SP51
16678 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
16679 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
16680 # in some places and NOT software settable i.e., <is2> can't fix it)
16681 # 3) In 85h mode, the arrow keys and special functions transmit when
16682 # the terminal is in dup-edit, and work only locally in local-edit.
16683 # Vi won't swallow `del char' for instance, but <smcup> turns on
16684 # dup-edit anyway so that the arrow keys will work right. If the
16685 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
16686 # <is2>. Note that 920E mode does not have software commands to toggle
16687 # between dup and local edit, so you get whatever was set last on the
16689 # 4) <flash> attribute is nice, but seems too slow to work correctly
16691 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
16692 # are selected, the <xmc@> entry should be removed.
16693 # 6) auto new-line should be on (selectable from setup mode only)
16695 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
16696 abm85h|Kimtron ABM 85H native mode,
16699 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
16701 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
16703 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
16705 abm85e|Kimtron ABM 85H in 920E mode,
16707 bel=^G, dim=\E), flash@,
16708 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
16710 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16711 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
16714 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
16716 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16717 # From: <malman@bbn-vax.arpa>
16718 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
16719 kt7|kimtron model kt-7,
16721 cols#80, it#8, lines#24,
16722 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
16723 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16724 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
16725 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
16726 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
16727 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
16728 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16729 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16730 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
16731 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
16732 # other kt7 entry and the adjacent key capabilities). Removed EE which is
16733 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
16734 # but we can't figure out what.
16735 kt7ix|kimtron model kt-7 or 70 in IX mode,
16737 cols#80, it#8, lines#25,
16738 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
16739 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
16740 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16741 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
16742 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
16743 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
16744 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
16745 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16746 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16747 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
16748 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
16749 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
16751 #### Microdata/MDIS
16753 # This was a line of terminals made by McDonnell-Douglas Information Systems.
16754 # These entries come direct from MDIS documentation. I have edited them only
16755 # to move primary names of the form p[0-9] * to aliases, and to comment out
16756 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
16757 # also removed the change history; the last version indicates this is
16758 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
16761 # McDonnell Information Systems Terminal Family History
16762 # =========================================
16764 # Prism-1, Prism-2 and P99:
16765 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
16767 # Prism-4 and Prism-5:
16768 # Slightly less ancient range of Microdata terminals. Follow-on from
16769 # Prism-2, but with many enhancements. P5 has eight display pages.
16772 # A special terminal for use with library systems, primarily in Germany.
16773 # Limited numbers. Similar functionality to P5 (except attributes?).
16775 # Prism-7, Prism-8 and Prism-9:
16776 # More recent range of MDIS terminals, in which P7 and P8
16777 # replace the P4 & P5, with added functionality, and P9 is the flagship.
16778 # The P9 has two emulation modes - P8 and ANSI - and includes a
16779 # large number of the DEC VT220 control sequences. Both
16780 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
16782 # Prism-12 and Prism-14:
16783 # Latest range, functionally very similar to the P9. The P14 has a
16784 # black-on-white overscanning screen.
16786 # The terminfo definitions given here are:
16788 # p2 - Prism-2 (or Prism-1 or P99).
16790 # p4 - Prism-4 (and older P7s & P8s).
16791 # p5 - Prism-5 (or Prism-6).
16794 # p8 - Prism-8 (in national or multinational mode).
16795 # p8-w - 132 column version of p8.
16796 # p9 - Prism-9 in ANSI mode.
16797 # p9-w - 132 column version of p9.
16798 # p9-8 - Prism-9 in Prism-8 emulation mode.
16799 # p9-8-w - As p9-8, but with 132 columns.
16801 # p12 - Prism-12 in ANSI mode.
16802 # p12-w - 132 column version of p12.
16803 # p12-m - Prism-12 in MDC emulation mode.
16804 # p12-m-w - As p12-m, but with 132 columns.
16805 # p14 - Prism-14 in ANSI mode.
16806 # p14-w - 132 column version of p14.
16807 # p14-m - Prism-14 in MDC emulation mode.
16808 # p14-m-w - As p14-m, but with 132 columns.
16813 # Includes Prism-1 and basic P99 without SP or MP loaded.
16814 # The simplest form of Prism-type terminal.
16815 # Basic cursor movement and clearing operations only.
16816 # No video attributes.
16818 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16819 # value up, followed by backspace.
16821 prism2|MDC Prism-2,
16824 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
16825 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16826 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16827 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
16828 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16829 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16830 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
16835 # Includes early versions of P7 & P8.
16836 # Basic family definition for most Prisms (except P2 and P9 ANSI).
16838 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16839 # value up, followed by backspace.
16840 # Cursor key definitions removed because they interfere with vi and csh keys.
16842 prism4|p4|P4|MDC Prism-4,
16843 am, bw, hs, mc5i, msgr,
16844 cols#80, lines#24, wsl#72, xmc#1,
16845 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
16846 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
16847 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16848 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16849 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
16850 fsl=\035\345, home=^A,
16851 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16852 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16853 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
16854 rev=^CD, rmso=^C\s, rmul=^C\s,
16855 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
16856 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
16857 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
16858 vpa=\013%p1%{32}%+%c,
16863 # Same definition as p4. Includes Prism-6 (not tested!).
16864 # Does not use any multi-page features.
16866 prism5|p5|P5|MDC Prism-5,
16872 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
16874 # Use p4 for very early models of P7.
16875 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16877 prism7|p7|P7|MDC Prism-7,
16878 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
16883 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
16884 # Supports national and multinational character sets.
16886 # Alternate char set operations only work in multinational mode.
16887 # Use p4 for very early models of P8.
16888 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16889 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16891 prism8|p8|P8|MDC Prism-8,
16892 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
16893 vpa=\E[%i%p1%dd, use=p4,
16895 # p8-w: Prism-8 in 132 column mode
16896 # --------------------------------
16898 # 'Wide' version of p8.
16900 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16902 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
16904 is2=\E[<12h\E[<14h, use=p8,
16906 # p9: Prism-9 in ANSI mode
16907 # -------------------------
16909 # The "flagship" model of this generation of terminals.
16910 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
16912 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
16913 # Fixes to deal with terminal firmware bugs:
16914 # . 'ri' uses insert-line since rev index doesn't always
16915 # . 'sgr0' has extra '0' since esc[m fails
16916 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
16917 # Not covered in the current definition:
16919 # . Programming Fn keys
16920 # . Graphic characters (defaults correctly to vt100)
16921 # . Padding values (sets xon)
16922 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16924 prism9|p9|P9|MDC Prism-9 in ANSII mode,
16925 am, bw, hs, msgr, xenl, xon,
16926 cols#80, it#8, lines#24, vt#3, wsl#72,
16927 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
16928 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
16929 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16930 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16931 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16932 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
16933 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
16934 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
16935 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
16936 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
16937 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
16938 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
16939 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
16940 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16941 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
16942 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
16943 rmso=\E[27m, rmul=\E[24m,
16944 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
16947 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
16948 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16949 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16950 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16953 # p9-w: Prism-9 in 132 column mode
16954 # --------------------------------
16956 # 'Wide' version of p9.
16958 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16960 is2=\E[&p\E[<12l\E F\E[<14h,
16961 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16963 # p9-8: Prism-9 in P8 mode
16964 # ------------------------
16966 # P9 terminal in P8 emulation mode.
16967 # Similar to p8 definition.
16968 # Insertion and deletion operations possible.
16970 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16971 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16972 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16974 # p9-8-w: Prism-9 in P8 and 132 column modes
16975 # ------------------------------------------
16977 # P9 terminal in P8 emulation mode and 132 column mode.
16979 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16980 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16981 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16983 # p12: Prism-12 in ANSI mode
16984 # ---------------------------
16986 # See p9 definition.
16988 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16991 # p12-w: Prism-12 in 132 column mode
16992 # ----------------------------------
16994 # 'Wide' version of p12.
16996 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
16999 # p12-m: Prism-12 in MDC emulation mode
17000 # -------------------------------------
17002 # P12 terminal in MDC emulation mode.
17003 # Similar to p8 definition.
17004 # Insertion and deletion operations possible.
17006 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
17009 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
17010 # -------------------------------------------------------
17012 # P12 terminal in MDC emulation mode and 132 column mode.
17014 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
17017 # p14: Prism-14 in ANSII mode
17018 # ---------------------------
17020 # See p9 definition.
17022 prism14|p14|P14|MDC Prism-14 in ANSII mode,
17025 # p14-w: Prism-14 in 132 column mode
17026 # ----------------------------------
17028 # 'Wide' version of p14.
17030 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17033 # p14-m: Prism-14 in MDC emulation mode
17034 # -------------------------------------
17036 # P14 terminal in MDC emulation mode.
17037 # Similar to p8 definition.
17038 # Insertion and deletion operations possible.
17040 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17043 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17044 # -------------------------------------------------------
17046 # P14 terminal in MDC emulation mode and 132 column mode.
17048 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17051 # End of McDonnell Information Systems Prism definitions
17053 # These things were popular in the Pick database community at one time
17054 # From: George Land <georgeland@aol.com> 24 Sep 1996
17055 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17057 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17058 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
17059 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17060 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
17061 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17062 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17063 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17064 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17065 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17066 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
17067 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17070 #### Microterm (act, mime)
17072 # The mime1 entries refer to the Microterm Mime I or Mime II.
17073 # The default mime is assumed to be in enhanced act iv mode.
17076 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17077 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17078 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17079 # since Sytek insists ^S means xoff.
17080 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17081 act4|microterm|microterm act iv,
17084 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
17085 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17086 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17087 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17088 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
17090 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17091 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17092 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17093 act5|microterm5|microterm act v,
17094 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17096 # Mimes using brightness for standout. Half bright is really dim unless
17097 # you turn up the brightness so far that lines show up on the screen.
17098 mime-fb|full bright mime1,
17099 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17100 mime-hb|half bright mime1,
17101 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17102 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17103 # the more plausible ":do=^J:" -- esr)
17104 # uc was at one time disabled to get around a curses bug, be wary of it
17105 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17107 cols#80, it#8, lines#24, vt#9,
17108 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
17109 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17110 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17111 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17112 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17113 # These termcaps (for mime2a) put the terminal in low intensity mode
17114 # since high intensity mode is so obnoxious.
17115 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17118 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17119 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17120 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17121 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
17122 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17123 smir=\EE, smso=\E\:, smul=\E6,
17124 # This is the preferred mode (but ^X can't be used as a kill character)
17125 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17127 cols#80, it#8, lines#24,
17128 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17129 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17130 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17131 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
17132 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17133 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17134 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17135 mime3a|mime1 emulating 3a,
17137 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17138 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17140 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17142 # Wed Mar 9 18:53:21 1983
17143 # We run our terminals at 2400 baud, so there might be some timing problems at
17144 # higher speeds. The major improvements in this model are the terminal now
17145 # scrolls down and insert mode works without redrawing the rest of the line
17146 # to the right of the cursor. This is done with a bit of a kludge using the
17147 # exit graphics mode to get out of insert, but it does not appear to hurt
17148 # anything when using vi at least. If you have some users using act4s with
17149 # programs that use curses and graphics mode this could be a problem.
17150 mime314|mm314|mime 314,
17153 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17154 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17155 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17156 # Microterm mime 340 from University of Wisconsin
17157 mm340|mime340|mime 340,
17159 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17160 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17161 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17162 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
17163 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
17164 # This came from University of Wisconsin marked "astro termcap for jooss".
17165 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17166 # also added <rmam>/<smam> based on the init string -- esr)
17167 mt4520-rv|micro-term 4520 reverse video,
17168 am, hs, msgr, xenl, xon,
17169 cols#80, it#8, lines#24, wsl#80,
17170 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
17171 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17172 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17173 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17174 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17175 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17176 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17177 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17178 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17180 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17181 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17182 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17183 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17184 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17185 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17186 tbc=\E[g, tsl=\E[25;1H,
17188 # Fri Aug 5 08:11:57 1983
17189 # This entry works for the ergo 4000 with the following setups:
17190 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17193 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17194 # Be advised that very early versions DO NOT WORK RIGHT !!
17195 # Microterm does have a ROM exchange program- use it or lose big
17196 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17197 ergo4000|microterm ergo 4000,
17200 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
17201 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17202 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17203 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17204 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17205 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17206 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17207 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17208 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17209 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17214 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17215 # For what happened to that group, see the ADDS section.
17217 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17220 # The following vendor-supplied termcaps were captured from the Boundless
17221 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17222 # identical, except for case, to lower-case ones. I also uncommented the acsc
17225 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17226 # DEC vt200/300 with color capabilities added.
17227 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17228 colors#8, pairs#64,
17229 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17231 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17232 # DEC vt200/300 with color capabilities added.
17233 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17234 colors#8, pairs#64,
17235 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17236 use=ncr260vt300wan,
17237 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17238 # DEC vt200/300 with color capabilities added.
17239 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17240 colors#8, pairs#64,
17241 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17243 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17244 # DEC vt200/300 with color capabilities added.
17245 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17246 colors#8, pairs#64,
17247 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17248 use=ncr260vt300wpp,
17249 # This definition for ViewPoint supports several attributes. This means
17250 # that it has magic cookies (extra spaces where the attributes begin).
17251 # Some applications do not function well with magic cookies. The System
17252 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17253 # If supporting various attributes is not vital, 'xmc#1' and the extra
17254 # attributes can be removed.
17255 # Mapping to ASCII character set ('acsc' capability) can also be
17256 # restored if needed.
17257 ncr260vppp|NCR 2900_260 viewpoint,
17258 am, bw, hs, km, mc5i, mir, msgr, xon,
17259 cols#80, lines#24, nlab#32, xmc#1,
17260 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17261 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17262 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17263 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17264 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17265 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
17266 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17267 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17269 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17270 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
17271 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
17272 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17273 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17274 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
17275 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
17276 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
17277 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
17278 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
17279 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17280 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
17281 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
17282 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17283 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17285 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
17286 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
17287 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
17289 cup=\Ea%i%p1%dR%p2%dC$<30>,
17290 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17292 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17295 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
17296 am, hs, mir, msgr, xenl, xon,
17297 cols#80, lines#24, nlab#32,
17298 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17299 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17300 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17301 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
17302 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17303 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17304 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17305 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17306 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17307 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
17308 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
17309 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
17310 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
17312 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17314 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17315 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
17316 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
17317 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
17318 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
17319 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17322 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17323 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17324 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
17325 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
17326 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
17327 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
17329 cup=\E[%i%p1%d;%p2%dH$<30>,
17330 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17332 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17335 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
17336 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17338 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17339 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17340 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
17341 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
17342 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17344 smkx=\E=, use=ncr260vt100an,
17345 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
17347 cup=\E[%i%p1%d;%p2%dH$<30>,
17348 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17350 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17353 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
17354 am, hs, mir, msgr, xenl, xon,
17355 cols#80, lines#24, nlab#32,
17356 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17357 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17358 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17359 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17360 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17361 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17362 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17363 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17364 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17365 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17366 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17367 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17368 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17369 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17371 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17372 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17373 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17374 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17375 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
17376 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
17377 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
17378 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
17379 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
17380 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
17381 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
17382 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17383 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
17384 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
17385 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17388 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17389 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17390 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17391 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17392 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17394 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
17396 cup=\E[%i%p1%d;%p2%dH$<30>,
17397 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
17398 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
17399 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
17400 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17401 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17402 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17403 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17405 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
17407 cup=\E[%i%p1%d;%p2%dH$<30>,
17408 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17410 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17413 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
17414 am, hs, mir, msgr, xenl, xon,
17415 cols#80, lines#24, nlab#32,
17416 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17417 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17418 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17419 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17420 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17421 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17422 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17423 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17424 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17425 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17426 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17427 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17428 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17429 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17431 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17432 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17433 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17434 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17435 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
17436 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
17437 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
17438 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
17439 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17440 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17441 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
17442 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
17443 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
17445 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17448 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17449 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17450 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17451 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17452 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17454 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
17456 cup=\E[%i%p1%d;%p2%dH$<30>,
17457 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17459 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17462 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
17463 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17464 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17465 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17466 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17468 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
17470 cup=\E[%i%p1%d;%p2%dH$<30>,
17471 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17473 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17476 # This terminfo file contains color capabilities for the Wyse325 emulation of
17477 # the NCR 2900/260C color terminal. Because of the structure of the command
17478 # (escape sequence) used to set color attributes, one of the fore/background
17479 # colors must be preset to a given value. I have set the background color to
17480 # black. The user can change this setup by altering the last section of the
17481 # 'setf' definition. The escape sequence to set color attributes is
17482 # ESC d y <foreground_color> <background_color> 1
17483 # In addition, the background color can be changed through the desk accessories.
17484 # The capability 'op' sets colors to green on black (default combination).
17486 # NOTE: The NCR Unix System Administrator's Shell will not function properly
17487 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
17488 # capability and recompile if you wish to have it included.
17490 ncr260wy325pp|NCR 2900_260 wyse 325,
17491 am, bw, hs, km, mc5i, mir, msgr, xon,
17492 colors#16, cols#80, lines#24, ncv#33, nlab#32,
17493 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17494 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
17495 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17496 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17497 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17498 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
17499 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17500 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17502 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17503 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
17504 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
17505 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
17506 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
17507 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
17508 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
17509 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
17510 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17511 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
17512 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17513 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17514 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17515 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17516 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17519 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17520 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17521 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
17522 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
17523 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
17524 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
17525 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
17526 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17528 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
17530 cup=\Ea%i%p1%dR%p2%dC$<30>,
17531 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17533 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17536 # This definition for Wyse 350 supports several attributes. This means
17537 # that it has magic cookies (extra spaces where the attributes begin).
17538 # Some applications do not function well with magic cookies. The System
17539 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17540 # If supporting various attributes is not vital, 'xmc#1' and the extra
17541 # attributes can be removed.
17542 # Mapping to ASCII character set ('acsc' capability) can also be
17543 # restored if needed.
17544 # In addition, color capabilities have been added to this file. The drawback,
17545 # however, is that the background color has to be black. The foreground colors
17546 # are numbered 0 through 15.
17548 # NOTE: The NCR Unix System Administrator's Shell does not function properly
17549 # with the 'pairs' capability defined as below. If you wish to
17550 # have it included, Un-comment it and recompile (using 'tic').
17552 ncr260wy350pp|NCR 2900_260 wyse 350,
17553 am, bw, hs, km, mc5i, mir, msgr, xon,
17554 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
17555 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17556 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
17557 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17558 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
17559 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17560 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
17561 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17562 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17564 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17565 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
17566 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17567 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17568 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17569 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17570 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17571 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17572 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17573 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17574 mc0=\EP$<10>, mc4=^T, mc5=^R,
17575 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
17576 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17577 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17578 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17581 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17582 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17583 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
17584 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
17585 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
17586 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
17587 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
17588 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17590 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
17592 cup=\Ea%i%p1%dR%p2%dC$<30>,
17593 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17595 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17598 # This definition for Wyse 50+ supports several attributes. This means
17599 # that it has magic cookies (extra spaces where the attributes begin).
17600 # Some applications do not function well with magic cookies. The System
17601 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17602 # If supporting various attributes is not vital, 'xmc#1' and the extra
17603 # attributes can be removed.
17604 # Mapping to ASCII character set ('acsc' capability) can also be
17605 # restored if needed.
17606 # (ncr260wy50+pp: originally contained commented-out
17607 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
17608 ncr260wy50+pp|NCR 2900_260 wyse 50+,
17609 am, bw, hs, km, mc5i, mir, msgr, xon,
17610 cols#80, lines#24, nlab#32, xmc#1,
17611 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
17612 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
17613 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17614 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
17615 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17616 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
17617 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
17619 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17620 \Ee4\Ex@\E`9\Ee7$<100>,
17621 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17622 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
17623 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17624 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17625 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17626 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17627 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17628 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17629 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17630 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17631 mc0=\EP$<10>, mc4=^T, mc5=^R,
17632 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17633 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17634 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17635 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17636 \Ee4\Ex@\E`9\Ee7$<100>,
17637 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
17638 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
17639 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
17641 cup=\Ea%i%p1%dR%p2%dC$<30>,
17642 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17643 \Ee4\Ex@\E`9\Ee7$<200>,
17644 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17645 \Ee4\Ex@\E`9\Ee7$<200>,
17647 ncr260wy60pp|NCR 2900_260 wyse 60,
17648 am, bw, hs, km, mc5i, mir, msgr, xon,
17649 cols#80, lines#24, nlab#32,
17650 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17651 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
17652 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17653 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17654 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17655 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
17656 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
17658 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17659 \Ee4\Ex@\E`9\Ee7$<100>,
17660 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17661 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
17662 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17663 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17664 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
17665 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
17666 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
17667 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
17668 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
17669 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17670 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17671 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
17672 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17673 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17674 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17675 \Ee4\Ex@\E`9\Ee7$<100>,
17676 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
17677 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
17679 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
17681 cup=\Ea%i%p1%dR%p2%dC$<30>,
17682 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17683 \Ee4\Ex@\E`9\Ee7$<100>,
17684 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17685 \Ee4\Ex@\E`9\Ee7$<100>,
17687 ncr160vppp|NCR 2900_160 viewpoint,
17689 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
17691 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
17693 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
17695 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
17696 use=ncr260vt100wan,
17697 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
17698 use=ncr260vt100wpp,
17699 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
17701 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
17703 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
17704 use=ncr260vt200wan,
17705 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
17706 use=ncr260vt200wpp,
17707 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
17709 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
17711 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
17712 use=ncr260vt300wan,
17713 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
17714 use=ncr260vt300wpp,
17715 ncr160wy50+pp|NCR 2900_160 wyse 50+,
17717 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
17718 use=ncr260wy50+wpp,
17719 ncr160wy60pp|NCR 2900_160 wyse 60,
17721 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
17723 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
17724 am, hs, mc5i, mir, msgr, xon,
17725 cols#80, it#8, lines#24, nlab#32,
17726 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
17727 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
17728 clear=\E[2J\E[1;1H$<300>, cr=\r,
17729 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
17730 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
17731 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
17732 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
17733 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
17734 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
17735 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
17736 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
17737 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
17739 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
17740 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
17741 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
17742 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
17743 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
17744 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
17745 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
17746 B\E)0\E%/0n\E[P\031$<200>,
17748 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17749 %;m%?%p9%t\016%e\017%;$<100>,
17750 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
17751 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
17753 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
17755 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
17756 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
17757 \E)0\E%/0n\E[P\031$<200>,
17760 # Vendor-supplied NCR termcaps end here
17762 # NCR7900 DIP switches:
17766 # 5 - Parity (Odd/Even)
17767 # 6 - Don't Send or Do Send Spaces
17768 # 7 - Parity Enable
17769 # 8 - Stop Bits (One/Two)
17772 # 1 - Upper/Lower Shift
17773 # 2 - Typewriter Shift
17774 # 3 - Half Duplex / Full Duplex
17775 # 4 - Light/Dark Background
17776 # 5-6 - Carriage Return Without / With Line Feed
17777 # 7 - Extended Mode
17778 # 8 - Suppress Keyboard Display
17781 # 1 - End of line entry disabled/enabled
17782 # 2 - Conversational mode / (Local?) Mode
17783 # 3 - Control characters displayed / not displayed
17784 # 4 - (2-wire?) / 4-wire communications
17785 # 5 - RTS on and off for each character
17786 # 6 - (50Hz?) / 60 Hz
17787 # 7 - Exit after level zero diagnostics
17788 # 8 - RS-232 interface
17791 # 1 - Reverse Channel (yes / no)
17792 # 2 - Manual answer (no / yes)
17793 # 3-4 - Cursor appearance
17794 # 5 - Communication Rate
17795 # 6 - Enable / Disable EXT turnoff
17796 # 7 - Enable / Disable CR turnoff
17797 # 8 - Enable / Disable backspace
17799 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
17800 # reverse, blink, dim, and underline) the appropriate number of bits (by
17801 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
17802 # '@' is (effectively) "or"ed with each attribute to generate the proper third
17803 # character in the <ESC>0 sequence. The <sgr> string implements the following
17806 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
17807 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
17809 # Where: P1 <==> Standout attribute parameter
17810 # P2 <==> Underline attribute parameter
17811 # P3 <==> Reverse attribute parameter
17812 # P4 <==> Blink attribute parameter
17813 # P5 <==> Dim attribute parameter
17814 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
17815 ncr7900i|ncr7900|ncr 7900 model 1,
17817 cols#80, lines#24, xmc#1,
17818 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17819 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
17820 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
17821 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
17823 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17825 sgr0=\E0@, smso=\E0Q, smul=\E0`,
17826 ncr7900iv|ncr 7900 model 4,
17829 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
17830 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
17831 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
17832 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
17833 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
17834 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
17835 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
17836 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
17837 # The user can enter a CTRL-B to get out of this locked state.
17838 # In <hpa>, we want to output the character given by the formula:
17839 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
17840 ncr7901|ncr 7901 model,
17843 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
17844 cub1=^H, cud1=\n, cuf1=^F,
17845 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
17847 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
17848 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
17849 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
17850 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17852 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
17853 vpa=\013%p1%{64}%+%c,
17855 # Newbury Data Recording Limited (Newbury Data)
17857 # Have been manufacturing and reselling various peripherals for a long time
17858 # They don't make terminals anymore, but are still in business (in 2007).
17859 # Their e-mail address is at ndsales@newburydata.co.uk
17860 # and their post address is:
17862 # Newbury Data Recording Ltd,
17863 # Premier Park, Road One,
17864 # Winsford, Cheshire, CW7 3PT
17866 # Their technical support is still good, they sent me for free a printed copy
17867 # of the 9500 user manual and I got it just 1 week after I first contacted them
17871 # Manufactured in the early/mid eighties, behaves almost the same as a
17872 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
17873 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
17874 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
17875 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
17876 # recognized: if you type in "ESC !", the next (third) character is not
17877 # echoed, showing that the terminal was actually waiting for a parameter!
17878 ndr9500|nd9500|Newbury Data 9500,
17879 am, bw, hs, mc5i, mir, msgr, ul, xon,
17880 cols#80, lines#24, wsl#79,
17881 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
17882 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
17883 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17884 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
17885 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
17886 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
17887 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
17888 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
17889 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17890 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
17891 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
17892 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17893 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17894 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
17895 pfloc=\E|%{48}%p1%+%c2%p2\031,
17896 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
17897 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
17898 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
17899 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
17900 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
17902 ndr9500-nl|NDR 9500 with no status line,
17905 dsl@, fsl@, tsl@, use=ndr9500,
17907 ndr9500-25|NDR 9500 with 25th line enabled,
17908 lines#25, use=ndr9500,
17910 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
17911 lines#25, use=ndr9500-nl,
17913 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
17916 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
17917 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
17918 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
17919 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
17921 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
17922 lines#25, use=ndr9500-mc,
17924 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
17927 dsl@, fsl@, tsl@, use=ndr9500-mc,
17929 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
17930 lines#25, use=ndr9500-mc-nl,
17932 #### Perkin-Elmer (Owl)
17934 # These are official terminfo entries from within Perkin-Elmer.
17937 bantam|pe550|pe6100|perkin elmer 550,
17940 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17941 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17942 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
17943 fox|pe1100|perkin elmer 1100,
17946 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
17947 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17948 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
17949 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
17950 owl|pe1200|perkin elmer 1200,
17953 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
17954 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17955 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
17956 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
17957 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
17958 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
17959 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
17960 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
17961 pe1251|pe6300|pe6312|perkin elmer 1251,
17963 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
17964 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
17965 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17966 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
17967 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
17968 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
17969 # (pe7000m: this had
17970 # rmul=\E!\0, smul=\E!\040,
17971 # which is probably wrong, it collides with kf0
17972 pe7000m|perkin elmer 7000 series monochrome monitor,
17975 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
17976 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
17977 ed=\EJ, el=\EI, home=\EH, ind=\n,
17978 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
17979 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
17980 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
17981 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
17983 pe7000c|perkin elmer 7000 series colour monitor,
17984 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
17985 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
17989 # Sperry Univac has merged with Burroughs to form Unisys.
17992 # This entry is for the Sperry UTS30 terminal running the TTY
17993 # utility under control of CP/M Plus 1R1. The functionality
17994 # provided is comparable to the DEC vt100.
17995 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
17996 uts30|sperry uts30 with cp/m@1R1,
17998 cols#80, lines#24, wsl#40,
17999 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18000 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
18001 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
18002 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18003 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18004 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
18005 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
18006 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
18007 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
18008 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
18009 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
18010 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
18011 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
18012 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
18013 smul=\E[4m, tsl=\E], uc=\EPB,
18017 # Tandem builds these things for use with its line of fault-tolerant
18018 # transaction-processing computers. They aren't generally available
18019 # on the merchant market, and so are fairly uncommon.
18022 tandem6510|adm3a repackaged by Tandem,
18025 # A funny series of terminal that TANDEM uses. The actual model numbers
18026 # have a fourth digit after 653 that designates minor variants. These are
18027 # natively block-mode and rather ugly, but they have a character mode which
18028 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
18029 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18030 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18031 tandem653|t653x|Tandem 653x multipage terminal,
18032 OTbs, am, da, db, hs,
18033 cols#80, lines#24, wsl#64, xmc#1,
18034 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
18035 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18036 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18037 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18039 #### Tandy/Radio Shack
18041 # Tandy has a line of VDTs distinct from its microcomputers.
18044 dmterm|deskmate terminal,
18047 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
18048 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18049 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18050 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18051 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18052 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18053 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18054 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18056 dt100|dt-100|Tandy DT-100 terminal,
18058 cols#80, lines#24, xmc#1,
18059 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18060 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18061 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18062 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18063 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18064 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18065 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18066 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18067 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18068 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18069 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18070 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18071 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18072 cols#132, use=dt100,
18073 dt110|Tandy DT-110 emulating ansi,
18076 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18077 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18078 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18079 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18080 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18081 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
18082 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18083 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18084 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18085 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18086 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18087 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18088 smacs=^N, smso=\E[7m, smul=\E[4m,
18089 pt210|TRS-80 PT-210 printing terminal,
18092 bel=^G, cr=\r, cud1=\n, ind=\n,
18094 #### Tektronix (tek)
18096 # Tektronix tubes are graphics terminals. Most of them use modified
18097 # oscilloscope technology incorporating a long-persistence green phosphor,
18098 # and support vector graphics on a main screen with an attached "dialogue
18099 # area" for interactive text.
18102 tek|tek4012|tektronix 4012,
18105 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
18106 ff=\014$<1000>, is2=\E^O,
18107 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18108 tek4013|tektronix 4013,
18109 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18110 tek4014|tektronix 4014,
18112 is2=\E\017\E9, use=tek4012,
18113 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18114 tek4015|tektronix 4015,
18115 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18116 tek4014-sm|tektronix 4014 in small font,
18117 cols#121, lines#58,
18118 is2=\E\017\E\:, use=tek4014,
18119 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18120 tek4015-sm|tektronix 4015 in small font,
18121 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18122 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18124 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18125 # how to set it for you.
18127 # It's got the Magic Cookie problem around stand-out mode. If you can't
18128 # live with Magic Cookie, remove the :so: and :se: fields and do without
18129 # reverse video. If you like reverse video stand-out mode but don't want
18130 # it to flash, change the letter 'H' to 'P' in the :so: field.
18131 tek4023|tektronix 4023,
18133 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18134 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
18135 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18136 rmso=^_@, smso=^_P,
18137 # It is recommended that you run the 4025 at 4800 baud or less;
18138 # various bugs in the terminal appear at 9600. It wedges at the
18139 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18140 # on keyboard don't work. You have to hit BREAK twice to get
18141 # one break at any speed - this is a documented feature.
18142 # Can't use cursor motion because it's memory relative, and
18143 # because it only works in the workspace, not the monitor.
18144 # Same for home. Likewise, standout only works in the workspace.
18146 # <el> was commented out since vi and rogue seem to work better
18147 # simulating it with lots of spaces!
18149 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18150 # and didn't seem necessary.
18152 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18154 cols#80, it#8, lines#34, lm#0,
18155 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
18156 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18157 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18158 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18159 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18160 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18161 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18163 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18164 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18166 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18167 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18168 tek4025-17|tek 4025 17 line window,
18169 lines#17, use=tek4025,
18170 tek4025-17-ws|tek 4025 17 line window in workspace,
18171 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18172 \r\037wor\s17\r\037mon\s17\r,
18173 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18174 smso=\037att e\r, use=tek4025-17,
18175 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18176 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18177 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18179 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18180 # The following status modes are assumed for normal operation (replace the
18181 # initial "!" by whatever the current command character is):
18182 # !COM 29 # NOTE: changes command character to GS (^])
18188 # ^]STO 9 17 25 33 41 49 57 65 73
18189 # Other modes may be set according to communication requirements.
18190 # If the command character is inadvertently changed, termcap can't restore it.
18191 # Insert-character cannot be made to work on both top and bottom rows.
18192 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18193 # There also seems to be a problem with vertical motion, perhaps involving
18194 # delete/insert-line, following a typed carriage return. This terminal sucks.
18195 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18196 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18197 # work any more. -- esr)
18198 tek4025a|Tektronix 4025A,
18199 OTbs, OTpt, am, bw, da, db, xon,
18200 cols#80, it#8, lines#34,
18201 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18202 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18203 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
18204 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18205 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18206 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18207 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
18208 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18209 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18210 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18211 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18213 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18214 # Here's the command file that I use to get rogue to work on the 4025.
18215 # It should work with any program using the old curses (e.g. it better
18216 # not try to scroll, or cursor addressing won't work. Also, you can't
18218 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18219 tek4025-cr|tek 4025 for curses and rogue,
18221 cols#80, it#8, lines#33,
18222 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
18223 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
18224 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18225 rmcup=\037wor 0, smcup=\037wor 33h,
18226 # next two lines commented out since curses only allows 128 chars, sigh.
18227 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18228 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18229 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18230 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18232 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18233 tek4105|tektronix 4105,
18234 OTbs, am, mir, msgr, ul, xenl, xt,
18235 cols#79, it#8, lines#29,
18236 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18237 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18238 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18239 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18240 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18241 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18242 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18243 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18244 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18245 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18246 smul=\E[=5;<2m, tbc=\E[1g,
18248 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18249 tek4105-30|4015 emulating 30 line vt100,
18250 am, mir, msgr, xenl, xon,
18251 cols#80, it#8, lines#30, vt#3,
18252 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18253 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18254 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18255 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18256 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18257 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18258 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18259 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
18260 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18261 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18262 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18263 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18264 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18265 %;m%?%p9%t\016%e\017%;$<2>,
18266 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18267 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18270 # Tektronix 4105 from BRL
18271 # The following setup modes are assumed for normal operation:
18272 # CODE ansi CRLF no DABUFFER 141
18273 # DAENABLE yes DALINES 30 DAMODE replace
18274 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18275 # FLAGGING input INSERTREPLACE replace LFCR no
18276 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18277 # SELECTCHARSET G1 0 TABS -2
18278 # Other setup modes may be set for operator convenience or communication
18279 # requirements; I recommend
18280 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18281 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18282 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18283 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
18284 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18285 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
18287 # and factory color maps. After setting these modes, save them with NVSAVE. No
18288 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18289 # "IC" cannot be used in combination with "im" & "ei".
18290 # "tek4105a" is just a guess:
18291 tek4105a|Tektronix 4105,
18292 OTbs, OTpt, msgr, xon,
18293 OTkn#8, cols#80, it#8, lines#30, vt#3,
18294 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18295 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18296 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18297 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18298 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18299 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18300 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18301 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18302 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18303 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18304 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18305 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18306 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18307 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18308 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18309 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18310 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
18311 \E[?7;8h\E[r\E[m\E>,
18312 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18313 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18316 # Tektronix 4106/4107/4109 from BRL
18317 # The following setup modes are assumed for normal operation:
18318 # CODE ansi COLUMNMODE 80 CRLF no
18319 # DABUFFER 141 DAENABLE yes DALINES 32
18320 # DAMODE replace DAVISIBILITY yes ECHO no
18321 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
18322 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
18323 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
18325 # Other setup modes may be set for operator convenience or communication
18326 # requirements; I recommend
18327 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18328 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18329 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18330 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
18331 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18332 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
18334 # and factory color maps. After setting these modes, save them with NVSAVE. No
18335 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18336 # "IC" cannot be used in combination with "im" & "ei".
18337 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
18339 cols#80, it#8, lines#32, vt#3,
18340 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18341 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18342 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18343 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18344 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18345 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18346 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18347 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18348 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18349 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18350 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18351 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18352 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18353 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18354 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18355 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18356 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
18357 ;5l\E[?7;8h\E[r\E[m\E>,
18358 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18359 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
18361 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
18362 # 0 selects Tek mode, i.e., \E%!0
18363 # 1 selects ANSI mode
18364 # 2 selects ANSI edit-mode
18365 # 3 selects VT52 mode
18367 # One odd thing about the description (which has been unchanged since the 90s)
18368 # is that the cursor addressing is using VT52 mode, and a few others use the
18369 # VT52's non-CSI versions of ANSI, e.g., \EJ.
18370 tek4107|tek4109|tektronix terminals 4107 4109,
18371 OTbs, am, mir, msgr, ul, xenl, xt,
18372 cols#79, it#8, lines#29,
18373 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
18374 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
18375 cub1=^H, cud1=\n, cuf1=\EC,
18376 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
18377 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
18378 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18379 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
18380 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
18381 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
18382 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
18383 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
18384 smul=\E%!1\E[4m$<2>\E%!0,
18385 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
18386 # see the note attached to tek4207.
18387 tek4207-s|Tektronix 4207 with sysline but no memory,
18389 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
18390 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18391 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18392 is2=\E7\E[?6l\E[2K\E[?6h\E8,
18393 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
18395 # The 4110 series may be a wonderful graphics series, but they make the 4025
18396 # look good for screen editing. In the dialog area, you can't move the cursor
18397 # off the bottom line. Out of the dialog area, ^K moves it up, but there
18398 # is no way to scroll.
18400 # Note that there is a floppy for free from Tek that makes the
18401 # 4112 emulate the vt52 (use the vt52 termcap). There is also
18402 # an expected enhancement that will use ANSI standard sequences.
18404 # 4112 in non-dialog area pretending to scroll. It really wraps
18405 # but vi is said to work (more or less) in this mode.
18407 # 'vi' works reasonably well with this entry.
18409 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
18412 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
18413 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
18414 # The 4112 with the ANSI compatibility enhancement
18415 tek4112|tek4114|tektronix 4110 series,
18418 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
18419 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
18420 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
18421 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
18422 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18423 tek4112-nd|4112 not in dialog area,
18425 cuu1=^K, use=tek4112,
18426 tek4112-5|4112 in 5 line dialog area,
18427 lines#5, use=tek4112,
18428 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
18429 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
18430 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
18431 # previously \0410 and \0411 sequences...I don't *think* they were supposed
18432 # to be 4-digit octal -- esr)
18433 tek4113|tektronix 4113 color graphics with 5 line dialog area,
18436 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
18437 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18439 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
18440 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
18442 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
18443 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
18444 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
18445 # :vb: needs enough delay to let you see the background color being toggled.
18446 tek4113-nd|tektronix 4113 color graphics with no dialog area,
18448 cols#80, it#8, lines#34,
18449 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
18451 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18453 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
18454 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
18455 # This entry is from Tek. Inc. (Brian Biehl)
18456 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
18457 otek4115|Tektronix 4115,
18458 OTbs, am, da, db, eo,
18459 cols#80, it#8, lines#34,
18460 cbt=\E[Z, clear=\E[H\E[2J,
18461 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
18462 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18463 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
18464 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
18466 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
18467 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
18468 kbs=^H, ri=\EM, rmam=\E[?7l,
18469 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
18470 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
18471 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
18473 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
18476 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18477 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18478 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18479 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
18480 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
18481 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18482 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
18483 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
18484 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
18485 rmso=\E[m, rmul=\E[m,
18486 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
18488 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18489 vpa=\E[%p1%{1}%+%dd,
18490 # The tek4125 emulates a vt100 incorrectly - the scrolling region
18491 # command is ignored. The following entry replaces <csr> with the needed
18492 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
18493 # chokes on; and adds a lot of initialization for the tek dialog area.
18494 # Note that this entry uses all 34 lines and sets the cursor color to green.
18495 # Steve Jacobson 8/85
18496 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
18497 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
18498 tek4125|tektronix 4125,
18500 csr@, dl1=\E[1M, il1=\E[1L,
18501 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
18502 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
18504 rc@, sc@, smkx=\E=, use=vt100+4bsd,
18506 # From: <jcoker@ucbic>
18507 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
18508 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
18509 # note that if jcoker wasn't confused you may be able to use this one.
18510 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
18511 tek4207|Tektronix 4207 graphics terminal with memory,
18512 am, bw, mir, msgr, ul, xenl,
18513 cols#80, it#8, lines#32,
18514 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
18515 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18516 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
18517 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
18518 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
18519 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18520 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18521 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
18522 rev=\E[7m, ri=\E[T,
18523 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
18524 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
18525 smul=\E[4m, tbc=\E[1g,
18527 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
18528 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
18529 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
18530 tek4404|tektronix 4404,
18532 cols#80, it#8, lines#32,
18533 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
18534 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
18535 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
18536 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
18537 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
18538 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
18539 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18540 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
18541 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
18542 # Some unknown person wrote:
18543 # I added the is string - straight Unix has ESC ; in the login
18544 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
18545 # mode). The is string here cleans up a few things (but not
18547 ct8500|tektronix ct8500,
18550 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
18551 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
18552 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
18553 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
18554 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
18556 # Tektronix 4205 terminal.
18558 # am is not defined because the wrap around occurs not when the char.
18559 # is placed in the 80'th column, but when we are attempting to type
18560 # the 81'st character on the line. (esr: hmm, this is like the vt100
18561 # version of xenl, perhaps am + xenl would work!)
18563 # Bold, dim, and standout are simulated by colors and thus not allowed
18564 # with colors. The tektronix color table is mapped into the RGB color
18565 # table by setf/setb. All colors are reset to factory specifications by oc.
18566 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
18567 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
18568 # interval then maps into pre-defined value.
18569 tek4205|tektronix 4205,
18571 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
18572 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18573 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
18574 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
18575 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18576 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18577 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
18578 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
18579 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
18581 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
18582 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
18583 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
18584 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
18585 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
18586 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
18587 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
18588 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
18589 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
18591 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
18592 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
18593 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
18595 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
18597 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
18598 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
18599 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18600 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18602 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18603 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18605 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
18606 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18607 smul=\E[4m, tbc=\E[1g,
18609 #### Teletype (tty)
18611 # These are the hardcopy Teletypes from before AT&T bought the company,
18612 # clattering electromechanical dinosaurs in Bakelite cases that printed on
18613 # pulpy yellow roll paper. If you remember these you go back a ways.
18614 # Teletype-branded VDTs are listed in the AT&T section.
18616 # The earliest UNIXes were designed to use these clunkers; nroff and a few
18617 # other programs still default to emitting codes for the Model 37.
18620 tty33|tty35|model 33 or 35 teletype,
18623 bel=^G, cr=\r, cud1=\n, ind=\n,
18624 tty37|model 37 teletype,
18626 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
18629 # There are known to be at least three flavors of the tty40, all seem more
18630 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
18631 # awful braindamage, such as printing a visible newline indicator after each
18632 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
18633 # braindamaged but has hope and is described here. The 40-4 is a 3270
18634 # lookalike and beyond hope. The terminal has visible bell but I don't know
18635 # it - it's null here to prevent it from showing the BL character.
18636 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
18637 # a "newline" style terminal (-crmode) vi figures all it needs is nl
18638 # to get crlf, even if <cr> is not ^M.)
18639 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
18640 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
18643 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
18644 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
18645 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
18646 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
18647 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
18648 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
18649 tty43|model 43 teletype,
18650 OTbs, am, hc, os, xon,
18652 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
18657 # You can add <is2=\E<> to put this 40-column mode, though I can't
18658 # for the life of me think why anyone would want to.
18659 scanset|sc410|sc415|Tymshare Scan Set,
18662 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
18663 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18664 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
18665 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
18666 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
18668 #### Volker-Craig (vc)
18670 # If you saw a Byte Magazine cover with a terminal on it during the early
18671 # 1980s, it was probably one of these. Carl Helmers liked them because
18672 # they could crank 19.2 and were cheap (that is, he liked them until he tried
18673 # to program one...)
18676 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
18677 # every other linefeed.
18678 vc303|vc103|vc203|volker-craig 303,
18681 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
18682 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
18683 kcuu1=^N, ll=\017$<1>W,
18684 vc303a|vc403a|volker-craig 303a,
18685 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
18686 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
18687 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
18688 vc404|volker-craig 404,
18691 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
18692 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18693 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
18694 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
18695 vc404-s|volker-craig 404 w/standout mode,
18696 cud1=\n, rmso=^O, smso=^N, use=vc404,
18697 # From: <wolfgang@cs.sfu.ca>
18698 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
18699 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
18702 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
18703 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
18704 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
18705 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
18706 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
18707 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
18708 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
18709 rmso=\E^_, smso=\E^Y,
18710 vc415|volker-craig 415,
18711 clear=^L, use=vc404,
18713 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
18716 #### IBM PC and clones
18719 # The pcplot IBM-PC terminal emulation program is really messed up. It is
18720 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
18721 # doesn't support scrolling regions, ignores add line commands, and ignores
18722 # delete line commands. Consequently, the resulting behavior looks like a
18723 # crude adm3a-type terminal.
18724 # Steve Jacobson 8/85
18725 pcplot|pc-plot terminal emulation program,
18727 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
18728 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
18729 # I've found that my KayPro II, running MDM730, continues to emulate an
18730 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
18731 # system the following termcap entry works well:
18732 # I have noticed a couple of minor glitches, but nothing I can't work
18733 # around. (I added two capabilities from the BRL entry -- esr)
18734 kaypro|kaypro2|kaypro II,
18737 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
18738 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
18739 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
18741 # From IBM, Thu May 5 19:35:27 1983
18742 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
18743 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
18746 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
18747 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
18749 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
18750 OTbs, am, bw, eo, hs, km, msgr, ul,
18751 cols#80, it#8, lines#24,
18752 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18754 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
18755 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18756 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18757 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
18758 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
18759 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
18760 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18761 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
18762 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
18763 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
18764 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
18765 rmso=\E[m, rmul=\E[m,
18766 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18768 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18772 # Apple II firmware console first, then various 80-column cards and
18773 # terminal emulators. For two cents I'd toss all these in the UFO file
18774 # along with the 40-column apple entries.
18777 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
18778 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
18779 # function of TIC, not the firmware.
18780 # The clear key on a IIgs will do something like clear-screen,
18781 # depending on what you're in.
18782 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
18783 OTbs, am, bw, eo, msgr,
18784 cols#80, it#8, lines#24,
18785 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
18786 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18787 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
18788 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
18790 # Apple //e with 80-column card, entry from BRL
18791 # The modem interface is permitted to discard LF (maybe DC1), otherwise
18792 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
18793 # Auto-wrap does not work right due to newline scrolling delay, which also
18794 # requires that you set "stty cr2".
18795 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
18796 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
18797 # using a terminal emulation program instead of the built-in firmware.
18801 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
18802 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
18803 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
18804 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18806 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
18807 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
18808 apple2e-p|Apple //e via Pascal,
18809 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
18810 kcud1=\n, use=apple2e,
18811 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
18812 # Enable DC3/DC1 flow control with "stty ixon -ixany".
18813 apple-ae|ASCII Express,
18814 OTbs, am, bw, msgr, nxon, xon,
18815 cols#80, it#8, lines#24,
18816 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
18817 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18818 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
18819 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18821 appleII|apple ii plus,
18823 cols#80, it#8, lines#24,
18824 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
18825 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
18826 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
18827 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
18828 # Originally by Gary Ford 21NOV83
18829 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
18830 apple-80|apple II with smarterm 80 col,
18833 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
18834 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
18835 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
18836 apple-soroc|apple emulating soroc 120,
18839 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18840 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
18841 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18842 # From Peter Harrison, Computer Graphics Lab, San Francisco
18843 # ucbvax!ucsfmis!harrison .....uucp
18844 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
18845 # "These two work. If you don't have the inverse video chip for the
18846 # Apple with videx then remove the :so: and :se: fields."
18847 # (apple-videx: this used to be called DaleApple -- esr)
18848 apple-videx|Apple with videx videoterm 80 column board with inverse video,
18850 cols#80, it#8, lines#24,
18851 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
18852 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18853 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
18854 rmso=^Z2, sgr0=^Z2, smso=^Z3,
18855 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
18856 # Apple Cat ][ 212 modem, + more all
18857 # controlled by ASCII Express: Pro.
18858 # From Dave Shaver <isucs1!shaver>
18859 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
18862 acsc=, clear=^L, cuf1=^\,
18863 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18864 flash=^W35^W06, home=^Y,
18865 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
18867 apple-uterm|Ultraterm for Apple micros,
18870 acsc=, clear=^L, cuf1=^\,
18871 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18872 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
18873 # from trwrba!bwong (Bradley W. Wong):
18875 # This entry assumes that you are using an apple with the UCSD Pascal
18876 # language card. SYSTEM.MISCINFO is assumed to be the same as that
18877 # supplied with the standard apple except that screenwidth should be set
18878 # using SETUP to 80 columns. Note that the right arrow is not mapped in
18879 # this termcap entry. This is because that key, on the Apple, transmits
18880 # a ^U and would thus preempt the more useful "up" function of vi.
18883 apple80p|80-column apple with Pascal card,
18886 clear=^Y^L, cuf1=^\\:,
18887 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18890 # Apple II+ equipped with Videx 80 column card
18892 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
18893 # manually converted by D A Gwyn
18895 # DO NOT use any terminal emulation with this data base, it works directly
18896 # with the Videx card. This has been tested with vi 1200 baud and works fine.
18898 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
18899 # 1 screen, while in R2 ^U doesn't.
18900 # For inverse alternate character set add:
18901 # <smacs>=^O:<rmacs>=^N:
18902 # (apple-v: added it#8 -- esr)
18903 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
18905 cols#80, it#8, lines#24,
18906 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
18907 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
18908 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
18909 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
18910 khome=^Y, rmso=^Z2, smso=^Z3,
18911 apple-videx3|vapple|Apple II with 80 col card,
18914 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
18915 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
18916 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18917 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
18918 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
18919 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
18920 aepro|Apple II+ running ASCII Express Pro--vt52,
18923 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
18924 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18926 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
18927 apple-vm80|ap-vm80|apple with viewmax-80,
18930 clear=\014$<300/>, cuf1=^\\:,
18931 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
18932 ed=\013$<300/>, el=^], home=\031$<200/>,
18934 #### Apple Lisa & Macintosh
18937 # (lisa: changed <cvvis> to <cnorm> -- esr)
18938 lisa|apple lisa console display (black on white),
18939 OTbs, am, eo, msgr,
18940 cols#88, it#8, lines#32,
18941 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
18942 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
18943 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
18944 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
18945 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18946 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
18947 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
18948 liswb|apple lisa console display (white on black),
18949 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
18950 smso=\E[m, smul=\E[4m, use=lisa,
18952 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
18953 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
18955 # These entries assume that the 'Auto Wraparound' is enabled.
18956 # Xon-Xoff flow control should also be enabled.
18958 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
18959 # settings are in non-volatile memory and don't need to be reset upon login.
18960 # Also setting the number of columns glitches the screen annoyingly.
18961 # You can type "reset" to get them set.
18963 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
18964 OTbs, OTpt, am, xenl, xon,
18965 OTkn#4, cols#80, it#8, lines#24, vt#3,
18966 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
18967 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18968 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
18969 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18970 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
18971 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
18972 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
18973 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18974 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
18975 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18977 # Lisaterm in 132 column ("wide") mode.
18978 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
18980 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
18981 # Although MacTerminal has insert/delete line, it is commented out here
18982 # since it is much faster and cleaner to use the "lock scrolling region"
18983 # method of inserting and deleting lines due to the MacTerminal implementation.
18984 # Also, the "Insert/delete ch" strings have an extra character appended to them
18985 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
18986 # supported by MacTerminal.
18987 mac|macintosh|Macintosh with MacTerminal,
18990 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
18991 # Lisaterm in 132 column ("wide") mode.
18992 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
18995 #### Radio Shack/Tandy
18998 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
18999 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
19000 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
19001 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
19003 cols#80, it#8, lines#24,
19004 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
19005 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
19006 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
19007 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
19008 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
19009 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
19010 # (trs2: removed obsolete ":nl=^_:" -- esr)
19011 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
19013 cols#80, it#8, lines#24,
19014 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
19015 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
19016 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
19017 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
19018 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
19019 # (This had extension capabilities
19020 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
19021 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
19022 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
19023 trs16|trs-80 model 16 console,
19025 cols#80, it#8, lines#24,
19026 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
19027 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19028 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19029 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19030 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19031 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19032 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19033 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19034 smacs=\ERG, smso=\ERD,
19036 #### Commodore Business Machines
19038 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19039 # after years of shaky engineering and egregious mismanagement. Made one
19040 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19041 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19042 # ever (most units sold); they can still be found gathering dust in closets
19046 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19047 # Added a few more entries, converted caret-type control sequence (^x) entries
19048 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19049 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19051 # :as:, :ae: Support for alternate character sets.
19052 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19053 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19054 # This one appears to fix a problem I always had with a line ending
19055 # at 'width+1' (I think) followed by a blank line in vi. The blank
19056 # line tended to disappear and reappear depending on how the screen
19057 # was refreshed. Note that this is probably needed only if you use
19058 # something like a Dnet Fterm with the window sized to some peculiar
19059 # dimension larger than 80 columns.
19060 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19061 # (amiga: removed obsolete :kn#10:,
19062 # also added empty <acsc> to suppress a warning --esr)
19064 OTbs, am, bw, xenl,
19066 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19067 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19068 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19069 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19070 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19071 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19072 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19073 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19074 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19075 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19076 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19077 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19078 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19080 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19081 # (amiga: added empty <acsc> to suppress a warning.
19082 # I'm told this entry screws up badly with AS225, the Amiga
19083 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19084 amiga-h|Hans Verkuil's Amiga ANSI,
19087 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19088 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
19089 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19090 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19091 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19092 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19093 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19094 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19095 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19096 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19097 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19098 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19099 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19100 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19101 smso=\2337m, smul=\2334m,
19103 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19105 # Pavel Fedin added
19110 amiga-8bit|Amiga ANSI using 8-bit controls,
19111 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19112 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19113 kpp=\233T, ri=\215, rin@, use=amiga-h,
19115 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19116 # requires use of appropriate preferences settings.
19117 amiga-vnc|Amiga using VNC console (black on light gray),
19118 am, da, db, msgr, ndscr,
19119 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
19120 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19121 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
19122 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19123 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19124 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19125 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19126 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19127 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19128 indn=\E[%p1%dS, invis=\E8m,
19129 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19130 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19131 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19132 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19133 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19134 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19135 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19136 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19137 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19138 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19139 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19140 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19141 smso=\E[1m, smul=\E[4m,
19143 # MorphOS on Genesi Pegasos
19144 # By Pavel Fedin <sonic_amiga@rambler.ru>
19146 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19147 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19148 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19149 ri=\215, rin@, use=amiga-h,
19151 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19152 # I'm trying to write a termcap for a commodore b-128, and I'm
19153 # having a little trouble. I've had to map most of my control characters
19154 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19155 # and create some functions (like cm), but thats life.
19156 # The problem is with the arrow keys - right, and up work fine, but
19157 # left deletes the previous character and down I just can't figure out.
19158 # Jove knows what I want, but I don't know what it's sending to me (it
19159 # isn't thats bound to next-line in jove).
19160 # Anybody got any ideas? Here's my termcap.
19161 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19163 commodore|b-128|Commodore B-128 micro,
19165 OTdN#20, cols#80, lines#24, pb#150,
19166 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
19167 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19168 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19169 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19170 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19175 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19176 northstar|North Star Advantage,
19180 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19181 el=\016$<200/>, home=\034\032$<200/>,
19185 # Thu Jul 7 03:55:16 1983
19187 # As an aside, be careful; it may sound like an anomaly on the
19188 # Osborne, but with the 80-column upgrade, it's too easy to
19189 # enter lines >80 columns!
19191 # I've already had several comments...
19192 # The Osborne-1 with the 80-col option is capable of being
19193 # 52, 80, or 104 characters wide; default to 80 for compatibility
19194 # with most systems.
19196 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19197 osborne-w|osborne1-w|osborne I in 104-column mode,
19199 cols#104, lines#24,
19200 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19201 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19202 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
19203 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19204 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19205 osborne|osborne1|osborne I in 80-column mode,
19206 OTbs, am, mir, msgr, ul, xhp,
19207 OTdB#4, cols#80, lines#24,
19208 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
19209 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19210 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19211 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19212 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19214 # Osborne Executive definition from BRL
19215 # Similar to tvi920
19216 # Added by David Milligan and Tom Smith (SMU)
19217 osexec|Osborne executive,
19219 OTug#1, cols#80, lines#24, xmc#1,
19220 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19221 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19222 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19223 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
19224 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19225 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19226 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19229 #### Console types for obsolete UNIX clones
19231 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19232 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19233 # were commercial, Minix an educational tool sold in conjunction with a book.
19234 # Memory-segmentation limits and a strong tendency to look like V7 long after
19235 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19236 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19237 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19238 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19239 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19240 # even as single processes under SunOS and the Macintosh OS.
19244 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19245 minix|minix console (v3),
19246 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19247 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19248 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19249 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19250 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19251 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19252 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19253 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19254 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19255 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19256 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19257 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19258 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19259 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19260 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19261 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19264 minix-3.0|minix console (v3.0),
19265 use=ecma+color, use=minix-1.7,
19268 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19269 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19270 minix-1.7|minix console (v1.7),
19272 cols#80, it#8, lines#25,
19273 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19274 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19275 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19276 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19277 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19278 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19279 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19280 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
19281 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
19282 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
19283 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
19284 smso=\E[7m, smul=\E[4m,
19285 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
19286 minix-old|minix-1.5|minix console (v1.5),
19288 cols#80, it#8, lines#25,
19289 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19290 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19291 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19292 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19293 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
19294 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
19295 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19296 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
19297 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
19298 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
19299 # The linewrap option can be specified by editing /usr/include/minix/config.h
19300 # before recompiling the minix 1.5 kernel.
19301 minix-old-am|minix console with linewrap,
19304 pc-minix|minix console on an Intel box,
19305 use=klone+acs, use=minix-3.0,
19307 # According to the Coherent 2.3 manual, the PC console is similar
19308 # to a z19. The differences seem to be (1) 25 lines, (2) no status
19309 # line, (3) standout is broken, (4) ins/del line is broken, (5)
19310 # has blinking and bold.
19311 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
19313 cols#80, it#8, lines#25,
19314 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19315 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
19316 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
19317 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
19318 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
19320 # According to the Venix 1.1 manual, the PC console is similar
19321 # to a DEC vt52. Differences seem to be (1) arrow keys send
19322 # different strings, (2) enhanced standout, (3) added insert/delete line.
19323 # Note in particular that it doesn't have automatic margins.
19324 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
19325 # not described here because this derives from an old termcap entry.
19326 pc-venix|venix|IBM PC console running Venix,
19327 cols#80, it#8, lines#25,
19328 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19329 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19330 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
19331 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
19333 #### Miscellaneous microcomputer consoles
19335 # If you know anything more about any of these, please tell me.
19338 # The MAI Basic Four computer was obsolete at the end of the 1980s.
19339 # It may be used as a terminal by putting it in "line" mode as seen on
19340 # one of the status lines.
19341 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
19342 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
19343 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
19344 # used \ED instead.
19345 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
19346 mai|basic4|MAI Basic Four in ansi mode,
19347 am, da, db, mir, msgr,
19348 cols#82, it#8, lines#25,
19349 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
19350 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
19351 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
19352 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
19353 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
19354 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
19355 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19356 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
19357 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
19358 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19359 smir=\E[4h, smso=\E[7m, smul=\E[4m,
19360 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
19361 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
19363 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
19364 # The Basis 108 was a Apple II clone, manufactured by the "Basis
19365 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
19366 # about 1,5 km from where I live, but doesn't build own computers any
19367 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
19368 # equipped with one or two 5.25" disk drives, had a monochrome and colour
19369 # video output for a TV set or a dedicated monitor and several slots for
19370 # Apple II cards. Basis 108 were quite popular at german schools before
19371 # the advent of the IBM PC. They run, for example, the UCSD Pascal
19372 # development system (which I used even in 1993 to program the steering
19373 # and data recording for our school's experimental solar panel :), Apple DOS
19375 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
19376 basis|BASIS108 computer with terminal translation table active,
19377 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
19378 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
19379 smso=\E(, use=adm3a,
19380 # luna's BMC terminal emulator
19381 luna|luna68k|LUNA68K Bitmap console,
19382 cols#88, lines#46, use=ansi-mini,
19383 megatek|pegasus workstation terminal emulator,
19386 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
19387 # interface (pre-Macintosh by several years) that went nowhere.
19388 xerox820|x820|Xerox 820,
19391 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19392 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
19395 #### Videotex and teletext
19398 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
19399 # \E[?3l 80 columns
19400 # \E[?4l scrolling on
19401 # \E[12h local echo off
19402 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
19403 # \E)0 G1 DEC set (line graphics)
19405 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
19406 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
19407 OTbs, eslok, hs, xenl,
19408 cols#80, it#8, lines#24, wsl#72, xmc#0,
19409 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
19410 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
19411 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19412 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19413 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19414 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19415 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
19416 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
19417 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
19418 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
19419 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
19420 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19421 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
19422 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
19423 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19424 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
19425 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
19426 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
19427 u6=\E[%i%d;%dR, u7=\E[6n,
19429 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
19431 minitel1|minitel 1,
19432 am, bw, eslok, hs, hz, .msgr, G0,
19433 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
19434 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
19435 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19436 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
19437 dsl=\037@A\030\n, el=^X,
19438 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
19439 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
19440 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
19441 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
19442 rev=\E], ri=^K, rmso=\E\\,
19443 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19444 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19445 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
19447 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
19448 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
19449 %tC%e%p1%'@'%+%c%;,
19450 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
19451 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
19452 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
19453 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
19454 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
19455 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
19457 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
19458 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
19459 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
19460 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
19461 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
19462 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
19463 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
19464 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
19465 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
19466 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
19467 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
19468 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
19469 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
19471 minitel1b|minitel 1-bistandard (in 40cols mode),
19473 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
19474 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19475 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
19476 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
19477 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
19478 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
19479 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
19480 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
19481 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
19482 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
19483 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
19484 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
19485 rmir=\E[4l, smir=\E[4h,
19486 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
19487 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
19488 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
19489 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
19491 # rmkx posait des problemes (logout en sortant de vi).
19492 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
19493 am@, bw@, eslok@, hz@, msgr, G0,
19494 colors@, cols#80, it#8, pairs@,
19495 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
19496 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
19497 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19498 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
19499 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
19500 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
19501 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
19502 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19503 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
19504 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
19505 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
19507 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
19508 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
19509 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
19510 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
19512 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
19513 smso=\E[7m, smul=\E[4m,
19514 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
19515 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
19516 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
19517 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
19519 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
19520 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
19521 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
19523 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
19525 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
19526 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
19527 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
19528 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
19529 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
19530 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
19531 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
19532 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
19533 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
19534 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
19537 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
19539 bold=\EG, clear=^L\EB,
19540 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
19541 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
19542 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19543 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
19546 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
19549 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
19550 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
19551 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
19552 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
19553 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
19555 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19556 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
19557 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
19558 .u8=\001Cu|\004r, use=minitel1b,
19562 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
19564 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
19565 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
19566 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
19568 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
19569 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
19570 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
19571 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
19573 # Fonctionne par exemple avec Midnight Commander (mc).
19575 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
19577 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
19578 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
19579 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
19581 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19582 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
19583 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
19584 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
19585 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
19586 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
19587 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
19588 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
19589 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
19590 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
19591 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
19592 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
19593 \,+k\,.l\,0\177\,-j,
19596 minitel12-80|minitel 12 (80cols),
19598 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
19600 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
19602 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
19604 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
19605 E0=^O, S0=\E)3\016,
19606 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19607 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
19608 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
19609 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
19610 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
19611 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
19612 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
19613 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
19614 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
19615 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
19616 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
19617 \,\\\,m\,+k\,.l\,0\177\,-j,
19621 # Add these in your ~/.screenrc for inputting some special glyphs like french
19622 # accentuated chars in 40 cols mode:
19624 # bindkey ^YA digraph '`' # Saisi accent grave.
19625 # bindkey ^YB digraph "'" # Saisi accent aigu.
19626 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
19627 # bindkey ^YH digraph '"' # Saisi accent trema.
19629 # bindkey ^Y# stuff \243 # Livre.
19630 # bindkey "^Y\047" stuff \247 # Paragraphe.
19631 # bindkey ^Yj stuff \306 # AE
19632 # bindkey ^Yz stuff \346 # ae
19633 # bindkey ^YKc stuff \347 # c cedille.
19636 screen.minitel1|Screen specific for minitel1,
19638 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
19640 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
19641 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19644 screen.minitel1b|Screen specific for minitel1b,
19645 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
19646 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
19647 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
19648 use=screen.minitel1,
19650 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
19651 colors@, ncv@, pairs@,
19652 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
19653 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
19654 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
19655 use=screen.minitel1b,
19657 screen.minitel1-nb|Screen specific for minitel1-nb,
19658 colors@, ncv@, pairs@,
19659 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19660 use=screen.minitel1,
19662 screen.minitel1b-nb|Screen specific for minitel1b-nb,
19663 colors@, ncv@, pairs@,
19664 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19665 use=screen.minitel1b,
19667 # From: Alexandre Montaron, 29 Sep 2016
19669 linux-m1|Linux Minitel 1 "like" Couleurs,
19670 am, bw@, ccc, mir, msgr, xenl,
19671 colors#8, it#8, ncv#16, pairs#64,
19672 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
19673 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
19674 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19675 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
19676 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19677 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
19678 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
19679 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
19680 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
19681 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
19682 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
19684 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
19685 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
19686 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
19687 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
19688 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
19689 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
19690 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
19691 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19692 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
19693 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
19694 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19695 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
19696 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
19697 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
19698 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
19699 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
19700 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
19701 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
19702 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
19704 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19705 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19706 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19707 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19708 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19709 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19710 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19711 \n\n\n\n\n\n\n\n\n\n,
19713 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
19714 # 2. Native brown color corrected to good yellow color.
19715 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
19716 # 4. Suppressed nonexistent underlined mode (normally as bright).
19717 # 5. ich/ich1 not filled because of non-curses programs.
19719 # 6. Suppressed nonexistent invisible mode.
19720 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
19722 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
19724 colors@, ncv@, pairs@,
19725 acsc@, bold=\E[33m, enacs@, initc@,
19726 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
19727 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
19728 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19729 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
19730 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
19731 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
19732 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19735 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
19737 colors@, ncv@, pairs@,
19738 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19739 uvvwwxxyyzz{{||}}~~,
19740 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
19741 enacs=\E)0, initc@,
19742 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
19743 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
19744 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
19746 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
19748 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
19749 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
19750 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
19751 \E]PFFFFFFF\E[;37m,
19754 # Screen entries counterpart :
19756 screen.linux-m1|Linux m1 specific for screen,
19758 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
19759 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
19760 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
19761 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19762 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19763 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19764 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19765 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19766 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19767 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19768 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19769 \n\n\n\n\n\n\n\n\n\n,
19772 screen.linux-m1b|Linux m1b specific for screen,
19774 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
19776 screen.linux-m2|Linux m2 specific for screen,
19777 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19778 uvvwwxxyyzz{{||}}~~,
19779 use=screen.linux-m1b,
19783 putty-m1|Putty Minitel 1 "like" Couleurs,
19785 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19786 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19787 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19788 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19789 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
19791 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
19793 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19794 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19795 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19796 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19797 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
19799 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
19801 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
19803 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19804 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19805 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19806 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19807 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
19810 screen.putty-m1|Putty m1 specific for screen,
19811 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
19813 screen.putty-m1b|Putty m1b specific for screen,
19815 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
19817 screen.putty-m2|Putty m2 specific for screen,
19818 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19819 uvvwwxxyyzz{{||}}~~,
19820 use=screen.putty-m1b,
19821 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
19824 # viewdata lacks a true cup capability,
19825 # so I achieved it with home and cud1/cuf1 sequences only !
19826 viewdata|prestel/viewdata terminals,
19829 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
19831 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
19832 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
19833 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
19834 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
19835 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
19836 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
19837 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
19839 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
19840 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
19842 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
19843 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
19844 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
19845 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
19846 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
19847 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
19848 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
19849 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
19850 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
19851 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
19852 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
19853 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
19854 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
19855 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
19856 .ll=^^^K, use=viewdata,
19858 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
19860 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
19862 rmso=\EG, smso=\EB, use=viewdata-o,
19864 ######## OBSOLETE VDT TYPES
19866 # These terminals are *long* dead -- these entries are retained for
19867 # historical interest only.
19869 #### Amtek Business Machines
19872 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
19873 # but these caps were commented out in 8.3; also, removed overridden
19874 # ":do=^J:" -- esr)
19875 abm80|amtek business machines 80,
19878 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
19879 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
19880 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
19882 #### Bell Labs blit terminals
19884 # These were AT&T's official entries. The 5620 FAQ maintained by
19885 # David Breneman <daveb@dgtl.com> has this to say:
19887 # Actually, in the beginning was the Jerq, and the Jerq was white with a
19888 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
19889 # was good. But lo, upon the horizon loomed a mighty management-type person
19890 # (known now only by the initials VP) who said, the mighty Jerq must stay
19891 # alone, and could not go forth into the world. So Locanthi and Pike put the
19892 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
19893 # world. And the Jerq lived the rest of its days in research, but never
19894 # strayed from those paths.
19896 # In all seriousness, the Blit was originally known as the Jerq, but when
19897 # it started to be shown outside of the halls of the Bell Labs Research
19898 # organization, the management powers that be decided that the name could
19899 # not remain. So it was renamed to be Blit. This was in late 1981.
19901 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
19905 blit|jerq|blit running teletype rom,
19907 cols#87, it#8, lines#72,
19908 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
19909 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
19910 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
19911 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
19912 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
19913 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
19915 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
19916 cbblit|fixterm|blit running columbus code,
19918 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
19919 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
19920 smul=\EU", use=blit,
19922 oblit|ojerq|first version of blit rom,
19923 am, da, db, eo, mir, ul, xon,
19924 cols#88, it#8, lines#72,
19925 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
19926 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
19927 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
19928 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
19931 #### Bolt, Beranek & Newman (bbn)
19933 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
19934 # The parent company, best known as the architects of the Internet, is
19937 # Jeff DelPapa <dp@world.std.com> writes:
19938 # The bitgraph was a large white box that contained a monochrome bitmap
19939 # display, and a 68000 to run it. You could download code and run it on
19940 # the cpu, it had 128kb (I think) of memory. I used one in the late
19941 # 70's, sure beat a vt100. It had one strange feature tho -- it used
19942 # the cpu to bitblt pixels to scroll, it took longer than the refresh
19943 # rate, and looked like a rubber sheet stretching, then snapping
19944 # upwards. It had everything the early mac had, except a floppy drive a
19945 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
19946 # Beranek and Neuman) sold at most a few hundred of them to the real
19947 # world. DOD may have bought more...
19950 # Entries for the BitGraph terminals. The problem
19951 # with scrolling in vi can only be fixed by getting BBN to put
19952 # smarter scroll logic in the terminal or changing vi or padding
19953 # scrolls with about 500 ms delay.
19955 # I always thought the problem was related to the terminal
19956 # counting newlines in its input buffer before scrolling and
19957 # then moving the screen that much. Then vi comes along and
19958 # paints lines in on the bottom line of the screen, so you get
19959 # this big white gap.
19961 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
19962 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19964 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
19965 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19967 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
19970 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
19971 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
19972 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
19973 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
19974 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19975 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
19976 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
19977 sgr0=\E[m, smkx=\E=, smso=\E[7m,
19979 bg1.25rv|bbn bitgraph 1.25 (reverse video),
19980 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19982 bg1.25nv|bbn bitgraph 1.25 (normal video),
19983 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19985 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
19986 bg1.25|bbn bitgraph 1.25,
19988 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
19989 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
19990 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
19991 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
19992 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
19993 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
19994 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
19997 #### Bull (bq, dku, vip)
19999 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
20001 #============================================#
20002 # BULL QUESTAR 210 `SDP' terminals emulation #
20003 #============================================#
20005 # Description written by R.K.Saunders (Bull Transac)
20007 # Modifications written by F. Girard (Bull MTS)
20008 # 19-05-87 V02.00.01
20009 # 17-12-87 V02.00.02
20010 # 15-09-89 V02.00.05
20012 # Typical technical selections F1 (modes SDP/ROLL):
20013 # -------------------------------------------------------
20014 # | 01 02 03 04 05 06 07 08 09 10 |
20015 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
20017 # | 11 12 13 14 15 16 17 18 19 20 |
20018 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
20020 # | 21 22 23 24 25 26 27 28 29 30 |
20021 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
20023 # | 31 32 33 34 35 36 37 38 39 40 |
20024 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
20025 # -------------------------------------------------------
20026 # Typical firmware identification F5 "etat 6":
20027 # P287.02.04b (AZERTY)
20028 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20029 # P298.03.03 (monochrome) or P374.03.02 (colour)
20031 # SM SDP mode (VIP command): ^[[?=h
20032 # RIS (erases screen): ^[c
20033 # DMI disable keyboard: ^[`
20034 # SM double rendition mode: ^[[?>h
20035 # RM solicited status mode: ^[[5l
20036 # RM character mode: ^[[>l
20037 # RM echoplex mode: ^[[12l
20038 # RM column tab mode: ^[[18l
20039 # RM forbid SS2 keyboard mode: ^[[?<l
20040 # SM scroll mode: ^[[=h
20041 # FCF enable XON/XOFF: ^[P1s^[\
20042 # MTL select end msg character: ^[[^Wp
20043 # EMI enable keyboard: ^[b
20044 # RIS retour etat initial: ^[c
20045 # enable FC keypad: ^[[?<h,
20046 # MPW map status line window: ^[PY99:98^[\
20047 # SCP select status line: ^[[0;98v
20048 # ED erase entire partition: ^[[2J
20049 # SCP select main partition: ^[[v
20050 # SM character insertion mode: ^[[4h
20051 # RM character replacement mode: ^[[4l
20052 # COO cursor on: ^[[r
20053 # COO cursor off: ^[[1r
20054 # SGR dim (turquoise) rev attr: ^[[2;7m
20055 # SGR Data normal attr: ^[[m
20056 # SO Line-graphic mode ON: ^N
20057 # SI Line-graphic mode OFF: ^O
20058 # MC start routing to printer: ^[[5i
20059 # MC stop routing to printer: ^M^[[4i
20062 # This entry covers the following terminals:
20063 # dku7102, tws2102, and tws models 2105 to 2112
20064 tws-generic|dku7102|Bull Questar tws terminals,
20065 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20066 cols#80, it#8, lines#24, wsl#80,
20067 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20068 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20069 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20070 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20071 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20072 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20073 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20074 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20075 il1=\E[L, ind=\n, invis=\E[0;8m,
20076 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20077 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20078 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20079 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20080 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20081 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20082 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20083 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20084 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20085 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20086 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20087 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20088 %p7%t;8%;m%?%p9%t\016%e\017%;,
20089 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20090 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20091 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20092 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20093 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20095 tws2103|xdku|BULL Questar tws2103,
20096 ht=^I, use=tws-generic,
20097 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20098 ht=^I, use=tws2102-sna,
20099 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20100 clear=\E[2J\E[H, cup@, dl@, dl1@,
20101 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20102 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20104 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20105 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20106 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20107 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20108 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20110 #=========================================================#
20111 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20112 #=========================================================#
20114 # Description written by J. Staerck (BULL SA)
20115 # Copyright (c) 1989 BULL SA
20116 #---------------------------------------------------------------------------
20117 # This entry is used for terminals with vt320 emulation mode
20118 # and following set-up :
20119 # 8 bit ISO Latin Character Set (ISO 8859-1),
20120 # 7 bit Control Characters,
20121 # 80 columns screen.
20122 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20123 # They are used in string capabilities with vt220-320 emulation mode.
20124 # In the following DEC definitions, two kinds of terminfo databases are
20126 # 1. the first with Command Sequence Introducer starting with escape
20127 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20128 # 2. the second with Command Sequence Introducer starting with escape
20129 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20130 # Soft Terminal Reset esc [ ! p
20131 # RIS (erases screen): esc c
20132 # DECKPNM numeric keypad mode: esc >
20133 # DECKPAM applic. keypad mode: esc =
20134 # DECSTBM Scrolling region: esc [ r
20135 # SCS select G0 = US: esc ( B
20136 # SCS select G1 = line-graphic: esc ) 0
20137 # Select 7-bit C1 controls: esc sp F
20138 # Select 8-bit C1 controls: esc sp G
20139 # Select cursor home: esc [ H
20140 # Select erase screen: esc [ J
20141 # SM KAM lock keyboard: esc [ 2 h
20142 # RM KAM unlock keyboard: esc [ 2 l
20143 # SM SRM local echo off: esc [ 1 2 h
20144 # RM SRM local echo on: esc [ 1 2 l
20145 # SM LNM New line : esc [ 2 0 h
20146 # RM LNM return = CR only: esc [ 2 0 l
20147 # SM DECCKM cursor keys mode: esc [ ? 1 h
20148 # RM DECCKM appli. keys mode: esc [ ? 1 l
20149 # SM DECANM ANSI mode on: esc [ ? 2 h
20150 # RM DECANM ANSI mode off: esc [ ? 2 l
20151 # SM DECCOLM 132-column screen: esc [ ? 3 h
20152 # RM DECCOLM 80-column screen: esc [ ? 3 l
20153 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20154 # RM DECSCLM Jump scroll: esc [ ? 4 l
20155 # SM DECSCNM screen light backgr. esc [ ? 5 h
20156 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20157 # SM DECOM move within margins: esc [ ? 6 h
20158 # RM DECOM move outside margins: esc [ ? 6 l
20159 # SM DECAWM auto right margin: esc [ ? 7 h
20160 # RM DECAWM auto right margin: esc [ ? 7 l
20161 # SM DECARM auto repeat: esc [ ? 8 h
20162 # RM DECARM auto repeat: esc [ ? 8 l
20163 # DECSASD Select active main: esc [ 0 $ }
20164 # DECSASD Select active status: esc [ 1 $ }
20165 # DECSSDT Select status none: esc [ 0 $ ~
20166 # DECSSDT Select status indic.: esc [ 1 $ ~
20167 # DECSSDT Select status host-wr: esc [ 2 $ ~
20168 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20169 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20170 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20171 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20172 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20173 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20174 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20175 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20176 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20177 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20178 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20179 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20180 # Char. and Line attributes: esc [ Ps ... Ps m
20181 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20182 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20185 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20186 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20187 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20188 cols#80, it#8, lines#24, vt#3, wsl#80,
20189 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20190 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20191 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20192 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20193 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20194 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20195 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20196 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20197 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20198 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20199 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20200 is1=\E[63;1"p\E[2h,
20201 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20203 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20204 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20205 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20206 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20207 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20208 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20209 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20210 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20211 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20212 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20213 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20214 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20216 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20217 %;m%?%p9%t\E(0%e\E(B%;,
20218 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20219 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20220 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20221 bq300-rv|Bull vt320 reverse 80 columns,
20222 flash=\E[?5l$<50>\E[?5h,
20223 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20226 bq300-w|Bull vt320 132 columns,
20228 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20230 rs2=\E[?3h, use=bq300,
20231 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20233 flash=\E[?5l$<50>\E[?5h,
20234 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20236 rs2=\E[?3h, use=bq300,
20238 # This entry is used for terminals with vt320 emulation mode
20239 # and following set-up :
20240 # 8 bit ISO Latin Character Set (ISO 8859-1),
20241 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20242 # 80 columns screen.
20243 # Soft Terminal Reset csi ! p
20244 # RIS (erases screen): esc c
20245 # DECKPNM numeric keypad mode: esc >
20246 # DECKPAM applic. keypad mode: esc =
20247 # DECSTBM Scrolling region: esc [ r
20248 # SCS select G0 = US: esc ( B
20249 # SCS select G1 = line-graphic: esc ) 0
20250 # Select 7-bit C1 controls: esc sp F
20251 # Select 8-bit C1 controls: esc sp G
20252 # Select cursor home: csi H
20253 # Select erase screen: csi J
20254 # SM KAM lock keyboard: csi 2 h
20255 # RM KAM unlock keyboard: csi 2 l
20256 # SM SRM local echo off: csi 1 2 h
20257 # RM SRM local echo on: csi 1 2 l
20258 # SM LNM New line : csi 2 0 h
20259 # RM LNM return = CR only: csi 2 0 l
20260 # SM DECCKM cursor keys mode: csi ? 1 h
20261 # RM DECCKM appli. keys mode: csi ? 1 l
20262 # SM DECANM ANSI mode on: csi ? 2 h
20263 # RM DECANM ANSI mode off: csi ? 2 l
20264 # SM DECCOLM 132-column screen: csi ? 3 h
20265 # RM DECCOLM 80-column screen: csi ? 3 l
20266 # SM DECSCLM Smooth scroll: csi ? 4 h
20267 # RM DECSCLM Jump scroll: csi ? 4 l
20268 # SM DECSCNM screen light backgr. csi ? 5 h
20269 # RM DECSCNM screen dark backgr. csi ? 5 l
20270 # SM DECOM move within margins: csi ? 6 h
20271 # RM DECOM move outside margins: csi ? 6 l
20272 # SM DECAWM auto right margin: csi ? 7 h
20273 # RM DECAWM auto right margin: csi ? 7 l
20274 # SM DECARM auto repeat: csi ? 8 h
20275 # RM DECARM auto repeat: csi ? 8 l
20276 # DECSASD Select active main: csi 0 $ }
20277 # DECSASD Select active status: csi 1 $ }
20278 # DECSSDT Select status none: csi 0 $ ~
20279 # DECSSDT Select status indic.: csi 1 $ ~
20280 # DECSSDT Select status host-wr: csi 2 $ ~
20281 # SM DECTCEM Visible cursor: csi ? 2 5 h
20282 # RM DECTCEM Invisible cursor: csi ? 2 5 l
20283 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
20284 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
20285 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
20286 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
20287 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
20288 # Char. and Line attributes: csi Ps ... Ps m
20289 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20290 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20291 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
20292 bq300-8|Bull vt320 full 8 bits 80 columns,
20293 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
20294 cols#80, it#8, lines#24, vt#3, wsl#80,
20295 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20296 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
20297 clear=\233H\233J, cnorm=\233?25h, cr=\r,
20298 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
20299 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
20300 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
20301 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
20302 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
20303 el=\233K, el1=\2331K, enacs=\E(B\E)0,
20304 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
20305 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
20306 ind=\ED, is1=\E[63;2"p\E[2h,
20307 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20309 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
20310 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
20311 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20312 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
20313 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
20314 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
20315 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
20316 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
20317 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
20318 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
20319 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
20320 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
20321 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
20322 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
20323 s0ds=\E(B, s1ds=\E(0, sc=\E7,
20324 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
20325 1%;m%?%p9%t\E(0%e\E(B%;,
20326 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
20327 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
20328 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
20329 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
20330 flash=\233?5l$<50>\233?5h,
20331 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20334 bq300-8w|Bull vt320 8-bit 132 columns,
20336 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20338 rs2=\233?3h, use=bq300-8,
20339 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
20341 flash=\233?5l$<50>\233?5h,
20342 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20344 rs2=\233?3h, use=bq300-8,
20346 # This entry is used for terminals with vt320 emulation mode
20347 # a 102 keys keyboard (PC scancode !) and following set-up :
20348 # 8 bit ISO Latin Character Set (ISO 8859-1),
20349 # 7 bit Control Characters,
20350 # 80 columns screen.
20351 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
20352 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
20353 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
20354 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
20355 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20356 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20357 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
20358 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
20359 flash=\E[?5l$<50>\E[?5h,
20360 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20363 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
20365 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20367 rs2=\E[?3h, use=bq300-pc,
20368 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
20370 flash=\E[?5l$<50>\E[?5h,
20371 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20373 rs2=\E[?3h, use=bq300-pc,
20374 # 8 bit ISO Latin Character Set (ISO 8859-1),
20375 # 8 bit Control Characters,
20376 # 80 columns screen.
20377 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
20378 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
20379 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
20380 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
20381 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20382 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
20383 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
20384 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
20385 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
20386 flash=\E[?5l$<50>\E[?5h,
20387 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20390 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
20392 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20394 rs2=\E[?3h, use=bq300-8-pc,
20395 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
20397 flash=\E[?5l$<50>\E[?5h,
20398 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20400 rs2=\E[?3h, use=bq300-8-pc,
20402 #======================================================#
20403 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
20404 #======================================================#
20406 # normal mode, 8 bits, 80 columns terminal.
20408 # RIS reset initial state: ^[c
20409 # BLE bell enable ^[h
20410 # BLD bell disable ^[g
20411 # CAMS char. attr. mode set ^[[D
20412 # CAMR char. attr. mode reset ^[[G
20414 # KBU keyboard unlock (set) ^[[W
20415 # KBL keyboard lock (reset) ^[[X
20416 # CM character mode (async.) ^[k
20417 # NEP non echoplex mode (by host) ^[l
20418 # EP echoplex mode (by host) ^[m
20419 # IM insert mode set ^[[I
20420 # IM insert mode reset ^[[J
20421 # RMS roll mode set ^[r
20422 # RMR roll mode reset ^[q
20423 # SM78 set mode vip7800 ^[[1q
20424 # SD scroll up (72 lines) ^[[0s
20425 # SD scroll down (72 lines) ^[[1s
20426 # RBM block mode reset ^[[E
20427 # SLS status line set ^[w
20428 # SLR status line reset ^[v
20429 # SLL status line lock ^[O
20430 # LGS Line-graphic mode set ^[G
20431 # LGR Line-graphic mode reset ^[F
20432 # TBC tab clear (at cursor pos.) ^[[g
20433 # TBI tab initialize ^[[N
20434 # TBS tab set (at cursor pos.) ^[p
20435 # PDS print data space ^[[0p
20436 # PHD print host data ^[[3p
20437 # PDT print data terminator ^[[<p
20438 # PRES print adapter reset ^[[2p
20439 # SSPR multi-part. reset ^[[<>u
20440 # SSP0 partition 0 set ^[[00u
20441 # SSP1 partition n format 1 ^[[PnPnSTRINGu
20442 # SSP2 partition n format 2 ^[[PnPnSTRINGu
20443 # SSP3 partition n format 3 ^[[PnPnu
20444 # ATR attribute (visual)
20447 # hide (blank) : ^[sH
20449 # inverse video : ^[sI
20454 # This covers the vip7800 and BQ3155-vip7800
20455 vip|Bull Questar 3155-7800,
20456 am, eslok, hs, km, mc5i, msgr, xenl, xon,
20457 cols#80, it#8, lines#24, vt#3, wsl#80,
20458 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
20459 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20460 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
20461 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
20462 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
20463 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
20464 is2=\E[00u\E[<>001001024080024080u\E[01u,
20465 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
20466 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
20467 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
20468 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
20469 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
20470 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
20471 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
20472 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
20473 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
20474 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
20475 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
20476 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
20477 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
20478 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
20479 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
20480 smul=\Es_, tbc=\E[N, tsl=\Ew,
20481 # normal screen, 8 bits, 132 columns terminal.
20482 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
20484 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
20485 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
20487 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
20488 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
20489 cols#132, lines#72, wsl#132,
20490 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
20495 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
20496 # that is smaller than the screen, and puts up a warning message
20497 # outside the window. Te erases the warning message, puts the
20498 # window back to be the whole screen, and puts the cursor at just
20499 # below the small window. I defined <cnorm> and <civis> to really turn
20500 # the cursor on and off, but I have taken this out since I don't
20501 # like the cursor being turned off when vi exits.
20502 cg7900|chromatics|chromatics 7900,
20505 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
20506 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
20507 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
20508 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
20510 rmso=\001C1\,\001c2\,,
20511 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
20512 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
20513 \001W0\,0\,79\,39\,,
20514 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
20516 #### Computer Automation
20519 ca22851|computer automation 22851,
20522 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
20523 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
20524 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
20529 # This entry has correct padding and the undocumented "ri" capability
20530 cyb83|xl83|cybernex xl-83,
20533 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20534 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
20535 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
20536 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
20537 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
20538 cyb110|mdl110|cybernex mdl-110,
20541 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20542 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20543 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
20544 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
20545 ht=\011$<43>, ich1=\016A\035$<3.5>,
20546 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
20550 # Datapoint is gone. They used to be headquartered in Texas.
20551 # They created ARCnet, an Ethernet competitor that flourished for a while
20552 # in the early 1980s before 3COM got wise and cut its prices. The service
20553 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
20556 dp3360|datapoint|datapoint 3360,
20559 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
20560 ed=^_, el=^^, home=^], ind=\n,
20562 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
20563 # The Datapoint 8242 Workstation was sold at least between 1985
20564 # and 1989. To make the terminal work with this entry, press
20565 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
20566 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
20567 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
20568 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
20569 # fact unusable because the strings sent by the terminal conflict
20570 # with other keys).
20571 # The terminal is capable of displaying "box draw" characters.
20572 # For each graphic character you must send 2 ESC's (\E\E) followed
20573 # by a control character as follows:
20574 # character meaning
20575 # ========= =======
20578 # ctrl-G bottom tee
20581 # ctrl-J top left corner
20582 # ctrl-K top right corner
20583 # ctrl-L bottom left corner
20584 # ctrl-M bottom right corner
20585 # ctrl-N horizontal line
20586 # ctrl-O vertical line
20587 # Unfortunately this cannot be fitted into the termcap/terminfo
20588 # description scheme.
20589 dp8242|datapoint 8242,
20592 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
20593 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
20594 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
20595 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20596 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
20597 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
20598 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
20599 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
20600 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20601 smso=\E^E, smul=\E^F,
20602 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
20605 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
20607 # These entries are DEC's official terminfos for its older terminals.
20608 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
20609 # Engineering for more information. Updated terminfos and termcaps
20610 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
20616 bel=^G, cr=\r, cub1=^H, cud1=\n,
20620 bel=^G, cr=\r, cub1=^H, cud1=\n,
20624 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20625 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
20629 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20630 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20631 el=\EK, ht=^I, ind=\n, ri=\EI,
20632 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
20633 vt61|vt-61|vt61.5|dec vt61,
20635 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
20636 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
20637 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
20638 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20641 # The gigi does standout with red!
20642 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
20643 gigi|vk100|dec gigi graphics terminal,
20646 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
20647 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20648 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20649 el=\E[K, ht=^I, ind=\n,
20650 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
20651 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
20652 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
20653 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20654 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
20657 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
20658 # a PC differentiated from the IBM clones. It was a total, ludicrous,
20659 # grossly-overpriced failure (among other things, DEC's OS didn't include
20660 # a format program, so you had to buy pre-formatted floppies from DEC at
20661 # a hefty premium!).
20662 pro350|decpro|dec pro console,
20664 cols#80, it#8, lines#24,
20665 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20666 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
20667 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20668 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20669 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
20670 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
20671 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
20676 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
20677 dw2|decwriter|dw|decwriter II,
20680 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20681 # \E(B Use U.S. character set (otherwise # => british pound !)
20682 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
20683 # \E[w 10 char/in pitch
20684 # \E[1;132 full width horizontal margins
20685 # \E[2g clear all tab stops
20687 # \E[66t 66 lines/page (for \f)
20688 # \E[1;66r full vertical page can be printed
20689 # \E[4g clear vertical tab stops
20690 # \E> disable alternate keypad mode (so it transmits numbers!)
20691 # \E[%i%p1%du set tab stop at column %d (origin == 1)
20692 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
20695 # The dw3 does standout with wide characters.
20697 dw3|la120|decwriter III,
20700 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
20701 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
20702 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
20704 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
20708 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
20709 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
20711 # These aren't official
20712 ln03|dec ln03 laser printer,
20715 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
20716 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
20718 ln03-w|dec ln03 laser printer 132 cols,
20720 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
20721 kcud1=\n, nel=\r\n, use=ln03,
20723 #### Delta Data (dd)
20726 # Untested. The cup sequence is hairy enough that it probably needs work.
20727 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
20728 # There are BSD-derived termcap entries floating around for this puppy
20729 # that are *certainly* wrong.
20730 delta|dd5000|delta data 5000,
20733 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
20734 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
20736 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
20738 #### Digital Data Research (ddr)
20741 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
20742 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
20744 cols#80, it#8, lines#24, vt#3,
20745 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20746 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
20747 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
20748 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
20749 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
20750 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
20751 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
20752 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
20753 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
20754 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
20755 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
20758 #### Evans & Sutherland
20761 # Jon Leech <leech@cs.unc.edu> tells us:
20762 # The ps300 was the Evans & Sutherland Picture System 300, a high
20763 # performance 3D vector graphics system with a bunch of specialized hardware.
20764 # Approximate date of release was 1982 (early 80s, anyway), and it had several
20765 # evolutions including (limited) color versions such as the PS330C. PS300s
20766 # were effectively obsolete by the late 80s, replaced by raster graphics
20767 # systems, although specialized applications like molecular modeling
20768 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
20769 # are out of production, though of course E&S is very much alive (in 1996).
20770 # (ps300: changed ":pt@:" to "it@" -- esr)
20772 ps300|Picture System 300,
20775 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
20777 #### General Electric (ge)
20780 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
20783 bel=^G, cr=\r, cud1=\n, ind=\n,
20785 #### Heathkit/Zenith
20788 # Here is a description of the H19 DIP switches:
20791 # 0-3 = baud rate as follows:
20796 # 0 1 0 1 1200 baud
20797 # 1 0 0 0 2400 baud
20798 # 1 0 1 0 4800 baud
20799 # 1 1 0 0 9600 baud
20800 # 1 1 0 1 19.2K baud
20802 # 4 = parity (0 = no parity)
20803 # 5 = even parity (0 = odd parity)
20804 # 6 = stick parity (0 = normal parity)
20805 # 7 = full duplex (0 = half duplex)
20808 # 0 = block cursor (0 = underscore cursor)
20809 # 1 = no key click (0 = keyclick)
20810 # 2 = wrap at end of line (0 = no wrap)
20811 # 3 = auto LF on CR (0 = no LF on CR)
20812 # 4 = auto CR on LF (0 = no CR on LF)
20813 # 5 = ANSI mode (0 = VT52 mode)
20814 # 6 = keypad shifted (0 = keypad unshifted)
20815 # 7 = 50Hz refresh (1 = 60Hz refresh)
20817 # Factory Default settings are as follows:
20819 # S401 1 0 0 0 1 1 0 0
20820 # S402 0 0 0 0 0 0 0 0
20821 # (h19: I added <rmam>/<smam> based on the init string;
20822 # also added empty <acsc> to suppress a tic warning -- esr)
20823 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
20824 OTbs, am, mir, msgr,
20825 cols#80, it#8, lines#24,
20826 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
20827 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
20828 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
20829 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
20830 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
20831 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
20832 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
20833 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
20834 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
20835 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
20836 h19-bs|heathkit w/keypad shifted,
20837 rmkx=\Eu, smkx=\Et, use=h19-b,
20838 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
20839 rmkx=\Eu, smkx=\Et, use=h19-u,
20840 # (h19: merged in <ip> from BSDI hp19-e entry>;
20841 # also added empty <acsc> to suppress a tic warning --esr)
20842 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
20843 # Tim tells us that:
20844 # I have an old Zenith-19 terminal at home that still gets a lot of use.
20845 # This terminal suffers from the same famous insert-mode padding lossage
20846 # that has been acknowledged for the Z29 terminal. Emacs is nearly
20847 # unusable on this box, since even a half-scroll up or down the window
20848 # causes flaming terminal death.
20850 # On the Z19, the only way I have found around this problem is to remove
20851 # the :al: and :dl: entries entirely. No amount of extra padding will
20852 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
20853 # makes Emacs a little slower, but it remains in the land of the living.
20855 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
20856 OTbs, am, eslok, hs, mir, msgr,
20857 cols#80, it#8, lines#24,
20858 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
20859 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20860 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
20861 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
20862 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20863 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
20864 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
20865 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
20866 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
20867 h19-u|heathkit with underscore cursor,
20868 cnorm@, cvvis@, use=h19-b,
20869 h19-g|h19g|heathkit w/block cursor,
20870 cnorm=\Ex4, cvvis@, use=h19-b,
20871 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
20873 dl1=\EM, il1=\EL, use=h19,
20875 # The major problem with the Z29 is that it requires more padding than the Z19.
20877 # The problem with declaring an H19 to be synonymous with a Z29 is that
20878 # it needs more padding. It especially loses if a program attempts
20879 # to put the Z29 into insert mode and insert text at 9600 baud. It
20880 # even loses worse if the program attempts to insert tabs at 9600
20881 # baud. Adding padding to text that is inserted loses because in
20882 # order to make the Z29 not die, one must add so much padding that
20883 # whenever the program tries to use insert mode, the effective
20884 # rate is about 110 baud.
20886 # What program would want to put the terminal into insert mode
20887 # and shove stuff at it at 9600 baud you ask?
20889 # Emacs. Emacs seems to want to do the mathematically optimal
20890 # thing in doing a redisplay rather than the practical thing.
20891 # When it is about to output a line on top of a line that is
20892 # already on the screen, instead of just killing to the end of
20893 # the line and outputting the new line, it compares the old line
20894 # and the new line and if there are any similarities, it
20895 # constructs the new line by deleting the text on the old line
20896 # on the terminal that is already there and then inserting new
20897 # text into the line to transform it into the new line that is
20898 # to be displayed. The Z29 does not react kindly to this.
20900 # But don't cry for too long.... There is a solution. You can make
20901 # a termcap entry for the Z29 that says the Z29 has no insert mode.
20902 # Then Emacs cannot use it. "Oh, no, but now inserting into a
20903 # line will be really slow", you say. Well there is a sort of a
20904 # solution to that too. There is an insert character option on
20905 # the Z29 that will insert one character. Unfortunately, it
20906 # involves putting the terminal into ansi mode, inserting the
20907 # character, and changing it back to H19 mode. All this takes 12
20908 # characters. Pretty expensive to insert one character, but it
20909 # works. Either Emacs doesn't try to use its inserting hack when
20910 # it's only given an insert character ability or the Z29 doesn't
20911 # require padding with this (the former is probably more likely,
20912 # but I haven't checked it out).
20913 # (z29: added empty <acsc> to suppress a tic warning, merged in
20914 # status line capabilities from BRL entry --esr)
20915 z29|zenith29|z29b|zenith z29b,
20916 OTbs, OTpt, am, eslok, hs, mir, msgr,
20917 OTkn#10, cols#80, lines#24,
20918 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
20919 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20920 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
20921 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
20922 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
20923 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
20924 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20925 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
20926 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
20927 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
20928 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
20929 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
20930 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
20931 # the world is stable. <rs1> causes the terminal to be reset to the state
20932 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
20933 # cursor, bc -> block cursor.
20934 # From: Mike Meyers
20935 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
20936 # looks vt100-compatible -- esr)
20937 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
20938 OTbs, OTpt, am, eslok, hs, mir, msgr,
20939 OTkn#10, cols#80, it#8, lines#24,
20940 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
20941 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20942 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20943 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20944 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20945 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
20946 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
20947 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
20948 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
20949 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
20950 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
20951 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
20952 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
20953 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
20955 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
20956 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
20957 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
20958 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
20961 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
20962 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
20965 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
20966 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
20969 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
20970 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
20971 am, eslok, hs, mc5i, mir, msgr, xon,
20973 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
20974 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
20975 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
20976 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20977 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20978 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20979 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20980 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
20981 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
20982 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
20983 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
20984 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
20985 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
20986 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
20987 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
20988 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
20989 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
20990 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20991 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
20993 # From: Brad Brahms <Brahms@USC-ECLC>
20994 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
20995 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
20996 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
20997 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
20998 OTbs, OTpt, mir, msgr,
20999 OTkn#10, cols#80, it#8, lines#24,
21000 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
21001 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
21002 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
21003 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
21004 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
21005 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
21006 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
21007 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21008 smir=\E@, smso=\Ep,
21009 p19|h19-b with il1/dl1,
21010 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
21011 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
21012 # (ztx: removed duplicate :sr: -- esr)
21013 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
21014 OTbs, am, eslok, hs,
21015 cols#80, it#8, lines#24,
21016 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
21017 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21018 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
21019 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
21020 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
21021 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
21022 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
21023 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21025 #### IMS International (ims)
21027 # There was a company called IMS International located in Carson City,
21028 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21029 # bus/Z80 hardware and a line of terminals called Ultimas.
21032 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21033 ims950-b|bare ims950 no init string,
21035 # (ims950: removed obsolete ":ko@:" -- esr)
21036 ims950|ims televideo 950 emulation,
21038 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21039 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21040 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21041 ims950-rv|ims tvi950 rev video,
21043 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21044 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21045 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21047 cols#80, it#8, lines#24,
21048 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21049 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21050 ht=^I, if=/usr/share/tabset/vt100,
21051 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21052 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21053 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21056 #### Intertec Data Systems
21058 # I think this company is long dead as of 1995. They made an early CP/M
21059 # micro called the "Intertec Superbrain" that was moderately popular,
21060 # then sank out of sight.
21063 superbrain|intertec superbrain,
21066 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
21067 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21068 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
21069 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21070 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21071 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21072 # and the reverse is actually true. Try it. -- esr)
21073 intertube|intertec|Intertec InterTube,
21076 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
21077 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21078 ind=\n, rmso=\E0@, smso=\E0P,
21079 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21080 # are typing and a command comes in, the keystrokes you type get interspersed
21081 # with the command and it messes up
21082 intertube2|intertec data systems intertube 2,
21084 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21085 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21086 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21088 #### Ithaca Intersystems
21090 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21091 # past. They used to be reachable at:
21093 # Ithaca Intersystems
21094 # 1650 Hanshaw Road
21095 # Ithaca, New York 14850
21097 # However, the outfit went bankrupt years ago.
21100 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21101 # These entries were written (originally in termcap syntax) by Brian Yandell
21102 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21103 # University of Wisconsin.
21105 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21106 # removed <if=/usr/share/tabset/init.graphos> and
21107 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21108 graphos|graphos III,
21110 cols#80, it#8, lines#24,
21111 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21112 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21113 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21114 cuu=\E[%p1%dA, cuu1=\E[A,
21115 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21116 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21117 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21118 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21119 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21120 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21121 smir=\E[4h, smso=\E[7m,
21122 graphos-30|graphos III with 30 lines,
21124 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21128 # These people used to be reachable at:
21131 # 1393 Main Street,
21132 # Waltham, MA 02154
21133 # Vox: (617)-890-5796.
21135 # However, if you call that number today you'll get an insurance company.
21136 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21137 # 26 Feb 1997 that says:
21139 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21140 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21141 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21142 # panel-mount etc). I can be emailed at sonfour@aol.com
21144 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21145 # dated 1984. According to the manual, it featured Tek 4010/4014
21146 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21149 modgraph|mod24|modgraph terminal emulating vt100,
21152 cvvis=\E\^9;0s\E\^7;1s,
21153 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21154 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21155 \E\^11;81s\E\^11;89s,
21156 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
21157 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21158 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21160 cols#80, it#8, lines#24,
21161 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21162 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21163 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21164 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21165 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21166 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21167 1s\E\^9;1s\E\^27;1,
21170 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21171 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21172 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21173 # mark and using delete-to-killbuffer work correctly. However, we would
21174 # like normal mode of operation to be using a Modgraph with 48 line setting.
21175 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21176 # the setting mark and delete-to-killbuffer results in the deletion of only
21177 # the line the mark is set on.
21178 # We've discovered that the delete-to-killbuffer works correctly
21179 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21180 # the first line disappears but a ctrl-l shows that it did work
21182 modgraph48|mod|Modgraph w/48 lines,
21183 OTbs, OTpt, am, xenl,
21184 cols#80, it#8, lines#48, vt#3,
21185 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21186 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21187 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21188 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21189 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21190 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21191 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21192 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21193 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21194 smso=\E[7m, smul=\E[4m,
21196 #### Morrow Designs
21198 # This was George Morrow's company. They started in the late 1970s making
21199 # S100-bus machines. They used to be reachable at:
21202 # 600 McCormick St.
21203 # San Leandro, CA 94577
21205 # but they're long gone now (1995).
21208 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21209 # Jeff's specimen was dated June 1984.
21210 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21211 mt70|mt-70|Morrow MD-70; native Morrow mode,
21212 am, mir, msgr, xon,
21213 cols#80, it#8, lines#24,
21214 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21215 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
21216 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21217 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21218 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21219 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21220 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21221 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21222 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21223 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21224 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21225 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21226 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21227 smul=\EG1, tbc=\E0, use=adm+sgr,
21232 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21234 ex155|Motorola Exorterm 155,
21236 OTkn#5, OTug#1, cols#80, lines#24,
21237 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21238 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21239 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21240 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21241 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21245 # This company is still around in 1995, manufacturing point-of-sale systems.
21247 omron|Omron 8025AG,
21250 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
21251 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21252 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21256 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21257 # were competition for things like the Tektronix 4025.
21260 # Ramtek 6221 from BRL, probably by Doug Gwyn
21261 # The following SET-UP modes are assumed for normal operation:
21262 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21263 # NEWLINE_OFF 80_COLUMNS
21264 # Other SET-UP modes may be set for operator convenience or communication
21265 # requirements; I recommend
21266 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21267 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21268 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21269 # Note that the Control-E key is useless on this brain-damaged terminal. No
21270 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21271 rt6221|Ramtek 6221 80x24,
21272 OTbs, OTpt, msgr, xon,
21273 OTkn#4, cols#80, it#8, lines#24, vt#3,
21274 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21275 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
21276 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21277 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21278 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21279 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21280 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21281 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
21282 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
21283 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
21284 rmso=\E[m, rmul=\E[m,
21285 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
21286 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
21288 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
21289 smul=\E[4m, tbc=\E[3g,
21290 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
21291 rt6221-w|Ramtek 6221 160x48,
21292 cols#160, lines#48,
21293 ll=\E[48;1H, use=rt6221,
21298 # RCA VP3301 or VP3501
21299 rca|rca vp3301/vp3501,
21302 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21303 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
21309 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
21310 # The following SET-UP modes are assumed for normal operation:
21311 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
21312 # ONLINE ANSI CURSOR_VISIBLE
21313 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
21314 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
21315 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
21316 # For use with graphics software, all graphics modes should be set to factory
21317 # default. Other SET-UP modes may be set for operator convenience or
21318 # communication requirements. No delays are specified; use "stty ixon -ixany"
21319 # to enable DC3/DC1 flow control!
21320 # I commented out the scrolling capabilities since they are too slow.
21321 hirez100|Selanar HiREZ-100,
21322 OTbs, OTpt, mir, msgr, xon,
21323 OTkn#4, cols#80, it#8, lines#48, vt#3,
21324 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
21325 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
21326 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21327 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
21328 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
21329 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
21330 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
21331 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
21332 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
21333 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
21334 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21335 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
21336 9l\E[r\E[m\E(B\017\E)0\E>,
21337 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
21338 smul=\E[4m, tbc=\E[3g,
21339 hirez100-w|Selanar HiREZ-100 in 132-column mode,
21340 cols#132, use=hirez100,
21345 # From University of Wisconsin
21346 vsc|Signetics Vsc Video driver by RMC,
21348 cols#80, it#8, lines#26,
21349 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
21350 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21351 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
21352 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
21356 # Alan Frisbie <frisbie@flying-disk.com> writes:
21358 # As you may recall, the Soroc logo consisted of their name,
21359 # with the letter "S" superimposed over an odd design. This
21360 # consisted of a circle with a slightly smaller 15 degree (approx.)
21361 # wedge with rounded corners inside it. The color was sort of
21362 # a metallic gold/yellow.
21364 # If I had been more of a beer drinker it might have been obvious
21365 # to me, but it took a clue from their service department to make
21366 # me exclaim, "Of course!" The circular object was the top of
21367 # a beer can (the old removable pop-top style) and "Soroc" was an
21368 # anagram for "Coors".
21370 # I can just imagine the founders of the company sitting around
21371 # one evening, tossing back a few and trying to decide what to
21372 # call their new company and what to use for a logo.
21375 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
21376 soroc120|iq120|soroc|soroc iq120,
21377 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
21378 kcuf1=^L, kcuu1=^K, use=adm3a,
21379 soroc140|iq140|soroc iq140,
21382 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21383 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
21384 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
21385 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
21386 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21387 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
21388 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
21390 #### Southwest Technical Products
21392 # These guys made an early personal micro called the M6800.
21393 # The ct82 was probably its console terminal.
21396 # (swtp: removed obsolete ":bc=^D:" -- esr)
21397 swtp|ct82|southwest technical products ct82,
21400 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
21401 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
21402 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
21403 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
21404 \017\035\027\022\011,
21405 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
21409 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
21411 # Synertek used to make ICs, various 6502-based single-board process
21412 # control and hobbyist computers, and assorted peripherals including a
21413 # series of small inexpensive terminals (I think they were one of the
21414 # first to have a "terminal-on-a-keyboard", where the terminal itself
21415 # was only slightly larger than the keyboard).
21417 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
21418 # was a 40x24 terminal that could connect to a standard TV through a
21419 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
21420 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
21421 # I have a KTM-2/80 still in working order. The KTM-2s had fully
21422 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
21423 # ROM and 2 ROMs as character generators. They were incredibly simple,
21424 # and I've never had any problems with mine (witness the fact that mine
21425 # was made in 1981 and is still working great... I've blown the video
21426 # output transistor a couple of times, but it's a 2N2222 :-)
21428 # The KTM-3 (which is what is listed in the terminfo file) was their
21429 # attempt at putting a KTM-2 in a box (and some models came with a
21430 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
21431 # control and escape sequences are very different. The KTM-3 was always
21432 # real broken, at least according to the folks I've talked to about it.
21434 # The padding in the entry is probably off--these terminals were very
21435 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
21436 # anyone with any sanity replaced the ROMs with something that provided
21437 # a reasonable subset of VT100 functionality, since the usual ROMs were
21438 # obviously very primitive... oh, you could get an upgraded ROM from
21439 # Synertek for some incredible amount of money, but what hacker with an
21440 # EPROM burner would do that? :)
21442 # Sorry I don't have any contact info; I believe they were located in
21443 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
21444 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
21445 # business these days.
21448 # Tested, seems to work fine with vi.
21449 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
21452 clear=^Z, cub1=^H, cuf1=^L,
21453 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21455 #### Tab Office Products
21457 # TAB Products Co. - Palo Alto, California
21458 # Electronic Office Products,
21459 # 1451 California Avenue 94304
21461 # I think they're out of business.
21464 # The tab 132 uses xon/xoff, so no padding needed.
21465 # <smkx>/<rmkx> have nothing to do with arrow keys.
21466 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
21467 # Seems to be no way to get rid of status line.
21468 # The manual for this puppy was dated June 1981. It claims to be VT52-
21469 # compatible but looks more vt100-like.
21470 tab132|tab|tab132-15|tab 132/15,
21472 OTdN@, cols#80, lines#24, lm#96,
21473 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
21474 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
21475 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
21477 tab132-w|tab132 in wide mode,
21479 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
21480 tab132-rv|tab132 in reverse-video mode,
21481 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
21482 tab132-w-rv|tab132 in reverse-video/wide mode,
21483 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
21488 # Research Incorporated
21489 # 6425 Flying Cloud Drive
21490 # Eden Prairie, MN 55344
21491 # Vox: (612)-941-3300
21493 # The Teleray terminals were all discontinued in 1992-93. RI still services
21494 # and repairs these beasts, but no longer manufactures them. The Teleray
21495 # people believe that all the types listed below are very rare now (1995).
21496 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
21497 # Model 100) that were ANSI-compatible.
21499 # Note two things called "teleray". Reorder should move the common one
21500 # to the front if you have either. A dumb teleray with the cursor stuck
21501 # on the bottom and no obvious model number is probably a 3700.
21504 t3700|dumb teleray 3700,
21507 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
21508 t3800|teleray 3800 series,
21510 cols#80, it#8, lines#24,
21511 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21512 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21513 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
21514 t1061|teleray|teleray 1061,
21515 OTbs, am, km, xhp, xt,
21516 cols#80, it#8, lines#24, xmc#1,
21517 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21518 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21519 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
21520 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
21521 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
21522 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
21523 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
21524 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
21526 t1061f|teleray 1061 with fast PROMs,
21527 dl1=\EM, il1=\EL, ip@, use=t1061,
21528 # "Teleray Arpa Special", officially designated as
21529 # "Teleray Arpa network model 10" with "Special feature 720".
21530 # This is the new (1981) fast microcode updating the older "arpa" proms
21531 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
21532 # converts the keypad to programmable function keys, and has other goodies.
21533 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
21534 # programs handle such lossage properly.
21535 # Note: this is NOT the old termcap's "t1061f with fast proms."
21536 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
21537 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
21538 t10|teleray 10 special,
21540 cols#80, it#8, lines#24, xmc#2,
21541 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
21542 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21543 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
21544 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
21546 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
21547 # back/forth words. Put the function keys (f1-f10) where they can be
21548 # found, and turn off the other magic keys along the top row, except
21549 # for line/local. Do the magic appropriate to make the page shifts work.
21550 # Also toggle ^S/^Q for those of us who use Emacs.
21552 am, da, db, mir, xhp, xt,
21554 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
21555 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
21556 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
21557 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
21558 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
21559 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
21560 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
21561 smso=\E[7m, smul=\E[4m,
21563 #### Texas Instruments (ti)
21566 # The Silent 700 was so called because it was built around a quiet thermal
21567 # printer. It was portable, equipped with an acoustic coupler, and pretty
21568 # neat for its day.
21569 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
21572 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
21575 # Texas Instruments 916 VDT 7 bit control mode
21577 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
21579 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
21580 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
21581 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21582 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
21583 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
21584 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
21585 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
21586 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
21587 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
21588 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
21589 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
21590 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
21591 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
21592 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
21595 # Texas Instruments 916 VDT 8 bit control mode
21597 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
21598 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
21599 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
21600 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
21601 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21602 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
21603 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
21605 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
21607 ti916-132|Texas Instruments 916 VDT vt220 132 column,
21608 cols#132, use=ti916,
21610 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
21612 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
21613 cols#132, use=ti916-8,
21614 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
21616 cols#80, it#8, lines#24,
21617 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21618 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
21619 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21620 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21621 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21622 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21623 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
21624 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
21625 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
21626 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
21627 smul=\E[4m, tbc=\E[3g,
21628 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
21630 cols#80, it#8, lines#24,
21631 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21632 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
21633 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21634 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21635 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21636 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21637 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
21638 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
21639 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
21640 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
21641 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21642 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
21643 cols#132, use=ti924,
21644 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
21645 cols#132, use=ti924-8,
21646 ti931|Texas Instruments 931 VDT,
21649 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
21650 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21651 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
21652 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
21653 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21654 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
21655 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
21656 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
21657 sgr0=\E4@, smso=\E4A, smul=\E4D,
21658 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
21659 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
21660 # (ti926-8: I corrected this from the broken SCO entry -- esr)
21661 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
21662 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
21663 ti_ansi|basic entry for ti928,
21664 am, bce, eo, xenl, xon,
21665 colors#8, cols#80, it#8, lines#25, pairs#64,
21666 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
21667 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
21668 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
21669 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
21670 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21671 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
21672 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
21673 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
21674 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
21675 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21676 smso=\E[7m, smul=\E[4m,
21678 # 928 VDT 7 bit control mode
21680 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
21681 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
21682 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
21683 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
21684 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
21685 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
21687 # 928 VDT 8 bit control mode
21689 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
21690 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
21691 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
21692 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
21693 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
21694 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
21695 kpp=\233T, kprt=\23335~, use=ti_ansi,
21700 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
21701 # had just <smso>=\EG6 which I think means standout was supposed to be
21702 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
21703 # <invis> might work-- esr)
21704 zen30|z30|zentec 30,
21707 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21708 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21709 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
21710 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
21711 smul@, use=adm+sgr,
21712 # (zen50: this had extension capabilities
21713 # :BS=^U:CL=^V:CR=^B:
21714 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
21715 # which were also in the original entry -- esr)
21716 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
21717 zen50|z50|zentec zephyr,
21719 cols#80, lines#24, xmc#1,
21720 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
21721 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
21722 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
21723 rmul@, smul@, use=adm+sgr,
21725 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
21726 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
21729 blink=\EM", clear=\EH\EJ, cnorm=\EP,
21730 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
21731 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
21732 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
21733 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
21734 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
21735 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
21736 smso=\EM$, smul=\EM0,
21738 ######## OBSOLETE UNIX CONSOLES
21741 #### Apollo consoles
21743 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
21744 # labeled HP700s now.
21747 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
21748 apollo|apollo console,
21751 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
21752 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
21753 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
21754 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
21755 smso=\ES, smul=\EU, vpa=\EO+\s,
21757 # We don't know whether or not the apollo guys replicated DEC's firmware bug
21758 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
21759 # both these capabilities.
21760 apollo_15P|apollo 15 inch display,
21761 rmir@, smir@, use=vt132,
21762 apollo_19L|apollo 19 inch display,
21763 rmir@, smir@, use=vt132,
21764 apollo_color|apollo color display,
21765 rmir@, smir@, use=vt132,
21769 # This actually describes the generic SVr4 display driver for Intel boxes.
21770 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
21771 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
21772 att6386|at386|386at|AT&T WGS 6386 console,
21774 cols#80, it#8, lines#25,
21775 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
21776 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
21777 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
21778 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21779 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21780 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21781 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
21782 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
21783 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
21784 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
21785 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
21786 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
21787 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21788 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
21789 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
21790 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
21792 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
21793 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
21794 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
21795 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
21796 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
21797 pc6300plus|AT&T 6300 plus,
21800 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
21801 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
21802 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
21803 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
21804 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
21805 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21806 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
21807 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
21808 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21809 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21811 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
21813 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
21814 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
21815 # is broken. All the special key sequences are broken, making it unusable
21816 # with Emacs. The problem stems from the following:
21818 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
21819 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
21820 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
21821 # uses resizable terminal windows, but the bundled terminal program always
21822 # uses an 80x24 window (and doesn't support seem to support a 132-column
21825 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
21826 # library which was a superset of SVr3.5 curses (called tam, for "terminal
21827 # access method".) tam includes support for real, overlapping windows,
21828 # onscreen function key labels, and bitmap graphics. But since the primary
21829 # user interface on the UNIX PC was a GUI program (ua, for "user
21830 # assistant",) and remote administration was considered important for the
21831 # machine, tam also supported VT100-compatible terminals attached to the
21832 # serial port or used across the StarLan network. To simulate the extra keys
21833 # not present on a VT100, users could press ESC and a two-letter sequence,
21834 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
21835 # however, were not the same as those sent by the actual Undo key. The
21836 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
21837 # (If you're interested in adding some of the tam calls to ncurses, btw, I
21838 # have the full documentation and several programs which use tam. It also
21839 # used an extended terminfo format to describe key sequences, special
21840 # highlighting modes, etc.)
21842 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
21843 # there are two sequences for every key-modifier combination (local keyboard
21844 # sequence and remote "VT100" sequence.) But I doubt many people are trying
21845 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
21846 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
21847 # seem to have been built from the manual describing the VT100 sequences.
21848 # This means it doesn't work for a real live UNIX PC.
21850 # FONTS: The UNIX PC also has a strange interpretation of "alternate
21851 # character set". Rather than the VT100 graphics you might expect, it allows
21852 # up to 8 custom fonts to be loaded at any given time. This means that
21853 # programs expecting VT100 graphics will usually be disappointed. For this
21854 # reason I have disabled the smacs/rmacs sequences, but they could easily be
21855 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
21856 # manpage), should you wish to do so:
21858 # SGR10 - Select font 0 - ESC [ 10 m or SO
21859 # SGR11 - Select font 1 - ESC [ 11 m or SI
21860 # SGR12 - Select font 2 - ESC [ 12 m
21862 # SGR17 - Select font 7 - ESC [ 17 m
21864 # Graphics for line drawing are not reliably found at *any* character
21865 # location because the UNIX PC has dynamically reloadable fonts. I use font
21866 # 0 for regular text and font 1 for italics, but this is by no means
21867 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
21869 # MISC: The cursor visible/cursor invisible sequences were swapped in the
21870 # distributed terminfo.
21872 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
21873 # the UNIX PC terminfo entry. The modified version works great with Lynx,
21874 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
21875 # attached by serial cable. In Emacs, even the Undo key works, and many
21876 # applications can now use the F1-F8 keys.
21879 # Terminfo entry for the AT&T Unix PC 7300
21880 # from escape(7) in Unix PC 7300 Manual.
21881 # Somewhat similar to a vt100-am (but different enough
21882 # to redo this from scratch.)
21884 # /***************************************************************
21886 # * FONT LOADING PROGRAM FOR THE UNIX PC
21888 # * This routine loads a font defined in the file ALTFONT
21889 # * into font memory slot #1. Once the font has been loaded,
21890 # * it can be used as an alternative character set.
21892 # * The call to ioctl with the argument WIOCLFONT is the key
21893 # * to this routine. For more information, see window(7) in
21894 # * the PC 7300 documentation.
21895 # ***************************************************************/
21896 # #include <string.h> /* needed for strcpy call */
21897 # #include <sys/window.h> /* needed for ioctl call */
21898 # #define FNSIZE 60 /* font name size */
21899 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
21901 # * The file /usr/lib/wfont/special.8.ft comes with the
21902 # * standard PC software. It defines a graphics character set
21903 # * similar to that of the Teletype 5425 terminal. To view
21904 # * this or other fonts in /usr/lib/wfont, use the command
21905 # * cfont <filename>. For further information on fonts see
21906 # * cfont(1) in the PC 7300 documentation.
21909 # struct altfdata /* structure for alt font data */
21911 # short altf_slot; /* memory slot number */
21912 # char altf_name[FNSIZE]; /* font name (file name) */
21916 # int wd; /* window in which altfont will be */
21917 # struct altfdata altf;
21918 # altf.altf_slot=1;
21919 # strcpy(altf.altf_name,ALTFONT);
21920 # for (wd =1; wd < 12; wd++) {
21921 # ioctl(wd, WIOCLFONT,&altf);
21925 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
21926 # they're confirmed by the man page for the System V display---esr)
21928 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
21930 cols#80, it#8, lines#24,
21931 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
21932 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
21933 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21934 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21935 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21936 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
21937 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
21938 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
21939 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
21940 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
21941 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
21942 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
21943 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
21944 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
21945 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
21946 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
21947 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
21948 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
21949 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
21950 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
21951 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
21952 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
21955 #### Convergent Technology
21957 # Burroughs bought Convergent shortly before it merged with Univac.
21958 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
21959 # from 1991 or earlier).
21962 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
21963 # (aws: removed unknown :dn=^K: -- esr)
21964 aws|Convergent Technologies AWS workstation under UTX and Xenix,
21966 OTug#0, cols#80, lines#28, xmc#0,
21967 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
21968 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
21969 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
21970 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
21971 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
21972 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
21974 awsc|Convergent Technologies AWS workstation under CTOS,
21976 OTug#0, cols#80, lines#24, xmc#0,
21977 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
21978 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
21979 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
21980 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
21986 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
21987 # The digital uVax II's had a graphic display called a qdss. It was
21988 # supposed to be a high performance graphic accelerator, but it was
21989 # late to market and barely appeared before faster dumb frame buffers
21990 # appeared. I have only used this display while running X11. However,
21991 # during bootup, it was in text mode, and probably had a terminal emulator
21992 # within it. And that is what your termcap entry is for. In graphics
21993 # mode the screen size is 1024x864 pixels.
21994 qdss|qdcons|qdss glass tty,
21996 cols#128, lines#57,
21997 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
21998 cup=\E=%p1%c%p2%c, cuu1=^K,
22000 #### Fortune Systems consoles
22002 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
22003 # in their day; I (esr) used one myself for a year or so around 1984.
22004 # They had no graphics, though, and couldn't compete against Suns and
22008 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
22009 # (This had extension capabilities
22010 # :rv=\EH:re=\EI:rg=0:GG=0:\
22011 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
22012 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
22013 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
22014 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
22015 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
22016 # to force both magic cookie glitches off. Once upon a time, I
22017 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
22018 # function keys; thus the "Al" value for HM was certainly an error. I renamed
22019 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
22020 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
22021 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
22022 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
22023 fos|fortune|Fortune system,
22026 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
22027 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
22028 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22029 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22030 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22031 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
22032 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22033 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22034 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22035 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
22036 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22037 smso=^\H`, smul=^\HP,
22039 #### Masscomp consoles
22041 # Masscomp has gone out of business. Their product line was purchased by
22042 # comany in Georgia (US) called "XS International", parts and service may
22043 # still be available through them.
22046 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22047 masscomp|masscomp workstation console,
22049 cols#80, it#8, lines#24,
22050 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22051 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22052 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22053 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22054 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22055 masscomp1|masscomp large screen version 1,
22056 cols#104, lines#36, use=masscomp,
22057 masscomp2|masscomp large screen version 2,
22058 cols#64, lines#21, use=masscomp,
22063 # OSF/1 1.1 Snapshot 2
22064 pmcons|pmconsole|PMAX console,
22066 cols#128, lines#57,
22067 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
22068 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22069 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22071 #### Other consoles
22072 # The following is a version of the ibm-pc entry distributed with PC/IX,
22073 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22074 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22075 # (the former is untrue, and the latter failed under UCB/man); standout and
22076 # underline modes have been added. Note: this entry describes the "native"
22077 # capabilities of the PC monochrome display, without ANY emulation; most
22078 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22079 pcix|PC/IX console,
22082 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22083 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22084 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22087 # (ibmpcx: this entry used to be known as ibmx.
22088 # It formerly included the following extension capabilities:
22089 # :GC=b:GL=v:GR=t:RT=^J:\
22090 # :GH=\E[196g:GV=\E[179g:\
22091 # :GU=\E[193g:GD=\E[194g:\
22092 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22093 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22094 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22095 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22096 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22097 # what was there before. -- esr)
22098 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22101 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22102 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22103 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22104 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22105 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22106 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22108 ######## OTHER OBSOLETE TYPES
22110 # These terminals are *long* dead -- these entries are retained for
22111 # historical interest only.
22114 #### Obsolete non-ANSI software emulations
22117 # CTRM terminal emulator
22118 # 1. underlining is not allowed with colors: first, is is simulated by
22119 # black on white, second, it disables background color manipulations.
22120 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22121 # so we have to save their status in the static registers A, B and H
22122 # respectively, to be able to restore them when color changes
22123 # (because any color change turns off ALL attributes)
22124 # 3. <bold> and <rev> sequences alternate modes,
22125 # rather than simply entering them. Thus we have to check the
22126 # static register B and H to determine the status, before sending the
22128 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22129 # and then reset colors
22130 # 5. implementation of the protect mode would badly penalize the performance.
22131 # we would have to use \E&bn sequence to turn off colors (as well as all
22132 # other attributes), and keep the status of protect mode in yet another
22133 # static variable. If someone really needs this mode, they would have to
22134 # create another terminfo entry.
22135 # 6. original color-pair is white on black.
22136 # store the information about colors into static registers
22137 # 7. set foreground color. it performs the following steps.
22138 # 1) turn off all attributes
22139 # 2) turn on the background and video attributes that have been turned
22140 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22141 # 3) turn on foreground attributes
22142 # 4) store information about foreground into U,V,W static registers
22143 # 8. turn on background: similar to turn on foreground above
22144 ctrm|C terminal emulator,
22146 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22147 pairs#63, pb#19200, vt#6,
22148 bel=^G, blink=\E&dA%{1}%PA,
22149 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22150 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22151 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22152 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22153 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22154 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22155 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22156 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22157 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22159 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22160 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22161 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22162 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22163 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22164 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22165 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22166 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22167 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22168 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22169 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22171 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22172 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22174 # gs6300 - can't use blue foreground, it clashes with underline;
22175 # it's simulated with cyan
22176 # Bug: The <op> capability probably resets attributes.
22177 # (gs6300: commented out <rmln> (no <smln>) --esr)
22178 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22179 am, bce, msgr, xon,
22180 colors#8, cols#80, it#8, lines#24, pairs#63,
22181 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22183 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22184 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22185 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22186 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22187 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22188 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
22189 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22190 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22191 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22192 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22193 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22194 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22195 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22197 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22198 # MS-Kermit with Heath-19 emulation mode enabled
22199 # (h19k: changed ":pt@:" to ":it@"
22200 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22205 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22206 # Software (formerly Peripherals Computers & Supplies, Inc) of
22207 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22208 # also be reached at support@synergy.com.
22209 versaterm|versaterm vt100 emulator for the Macintosh,
22211 cols#80, it#8, lines#24,
22212 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22213 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
22214 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22215 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22216 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22217 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22218 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22219 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22220 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
22221 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22222 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22223 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22226 # From: Rick Thomas <ihnp4!btlunix!rbt>
22227 # (xtalk: I added <rmam>/<smam> based on the init string.
22228 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22229 am, mir, msgr, xon,
22230 cols#80, it#8, lines#24, vt#3, xmc#1,
22231 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22232 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
22233 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22234 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22235 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22236 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22237 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22238 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22239 rmkx=\E[?1l\E>, rmso=\E[m\s,
22240 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22241 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22242 tbc=\E[3g, use=vt100+fnkeys,
22244 # The official PC terminal emulator program of the AT&T Product Centers.
22245 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22246 simterm|attpc running simterm,
22249 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22250 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22251 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
22252 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22254 #### Daisy wheel printers
22256 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22257 # wheel terminals. These are now largely obsolete.
22260 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22261 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22264 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
22265 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22266 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22268 is2=\r \E9, use=diablo1620,
22269 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22270 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22271 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22273 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22275 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22277 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22278 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22280 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
22281 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
22282 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
22283 # If no tab is set or the terminal's in a bad mood, it glitches the screen
22284 # around all of memory. Note that return puts a blank ("a return character")
22285 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
22286 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
22287 # curses won't work (some old BSD versions) because it doesn't clear this bit,
22288 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
22289 # I have been unable to get tabs set in all 96 lines - it always leaves at
22290 # least one line with no tabs in it, and once you tab through that line,
22291 # it completely weirds out.
22292 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
22295 cols#80, lines#24, lm#96,
22296 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
22297 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
22298 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
22299 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
22300 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
22304 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22305 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22306 gsi|mystery gsi terminal,
22309 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
22311 aj830|aj832|aj|anderson jacobson,
22313 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
22315 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
22316 aj510|Anderson-Jacobson model 510,
22319 clear=^L, cub1=^H, cuf1=\EX,
22320 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
22321 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
22322 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
22323 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
22324 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
22326 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
22327 # This is incomplete, but it's a start.
22328 nec5520|nec|spinwriter|nec 5520,
22331 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
22332 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
22334 qume5|qume|Qume Sprint 5,
22337 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22338 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22339 # I suspect the xerox 1720 is the same as the diablo 1620.
22340 xerox1720|x1720|x1750|xerox 1720,
22343 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
22346 #### Miscellaneous obsolete terminals, manufacturers unknown
22348 # If you have any information about these (like, a manufacturer's name,
22349 # and a date on the serial-number plate) please send it!
22351 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
22354 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
22355 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
22358 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
22359 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
22360 kf4=\E8, rmso=\Em^C, smso=\Em^L,
22361 cops10|cops|cops-10|cops 10,
22364 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22365 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
22366 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
22368 # (d132: removed duplicate :ic=\E5:,
22369 # merged in capabilities from a BRL entry -- esr)
22370 d132|datagraphix|datagraphix 132a,
22373 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
22374 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
22375 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
22376 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
22377 # The d800 was an early portable terminal from c.1984-85 that looked a lot
22378 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
22379 # mode (which is what this entry looks like) and several other lesser-known
22382 OTbs, am, da, db, msgr, xhp,
22383 cols#80, it#8, lines#24,
22384 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22385 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
22386 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
22387 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
22388 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22389 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
22390 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22391 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
22392 digilog|digilog 333,
22395 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
22397 # The DWK was a terminal manufactured in the Soviet Union c.1986
22398 dwk|dwk-vt|dwk terminal,
22400 cols#80, it#8, lines#24,
22401 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
22403 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22404 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
22405 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
22406 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
22407 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
22408 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
22409 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
22410 sgr0=\EX, smacs=\EF, smso=\ET,
22411 env230|envision230|envision 230 graphics terminal,
22413 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
22414 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22416 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
22417 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
22418 # coupler attached, the whole rig fitting in a suitcase and more or less
22419 # portable. Hot stuff for c.1977 :-) -- esr
22420 ep48|ep4080|execuport 4080,
22423 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
22424 ep40|ep4000|execuport 4000,
22425 cols#136, use=ep4080,
22426 # Adam Thompson <athompso@pangea.ca> tells us:
22427 # Informer series - these are all portable units, resembling older
22428 # automatic bread-baking machines. The terminal looks like a `clamshell'
22429 # design, but isn't. The structure is similar to the Direct terminals,
22430 # but only half the width. The entire unit is only about 10" wide.
22431 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
22432 # keyboard. All the keys are crammed together, much like some laptop
22433 # PCs today, but perhaps less well organized...all these units have a
22434 # bewildering array of plugs on the back, including a built-in modem.
22435 # The 305 was a color version of the 304; the 306 and 307 were mono and
22436 # color terminals built for IBM bisync protocols.
22437 # From: Paul Leondis <unllab@amber.berkeley.edu>
22438 ifmr|Informer D304,
22441 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
22442 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
22443 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
22445 # Entry largely based on wy60 and has the features of wy60ak.
22446 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
22447 am, bw, hs, km, mir, msgr, ul, xon,
22448 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
22449 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
22450 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
22451 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
22452 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
22453 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
22454 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
22456 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
22457 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
22459 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
22460 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
22461 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
22462 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
22463 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
22464 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
22465 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
22466 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
22467 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
22468 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
22469 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
22470 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
22471 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
22472 rs3=\EwG\Ee($<150>,
22473 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
22474 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
22475 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
22476 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
22477 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
22479 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
22480 uc=\EG8\EG0, use=adm+sgr,
22481 teletec|Teletec Datascreen,
22484 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
22486 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
22487 # This description is for the LANPAR Technologies VISION 3220
22488 # terminal from 1984/85. The function key definitions k0-k5 represent the
22489 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
22490 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
22492 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
22493 # I had a couple of scopes (3221) like this once where I used to work, around
22494 # the 1987 time frame if memory serves me correctly. These scopes were made
22495 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
22496 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
22497 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
22498 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
22499 # (3221) cost about $1500 each, and one was always broken -- had to be sent
22500 # back to the shop for repairs.
22501 # The only real advantage these scopes had over the VT-240's were:
22502 # 1) They were faster in the Regis display, or at least the ones I did
22503 # 2) They had a handy debugging feature where you could split-screen the
22504 # scope, the graphics would appear on the top, and the REGIS commands would
22505 # appear on the bottom. I don't remember the VT-240s being able to do that.
22506 # I would swear that LANPAR Technologies was in MA someplace, but since I
22507 # don't work at the same place anymore, and those terminals and manuals were
22508 # long since junked, I cannot be any more sure than that.
22510 # (v3220: removed obsolete ":kn#10:",
22511 # I added <rmam>/<smam> based on the init string -- esr)
22512 v3220|LANPAR Vision II model 3220/3221/3222,
22513 OTbs, am, mir, xenl,
22514 cols#80, it#8, lines#24,
22515 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22516 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22517 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
22518 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
22519 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
22520 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
22521 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
22522 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22523 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
22524 ######## ICH/ICH1 VERSUS RMIR/SMIR
22526 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
22527 # are present; the symptom is doubled characters in an update using insert.
22528 # These applications are technically correct; in both 4.3BSD termcap and
22529 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
22530 # unless the terminal needs both. To my knowledge, no terminal still in this
22531 # file requires both other than the very obsolete dm2500.
22533 # For ncurses-based applications this is not a problem, as ncurses uses
22534 # one or the other as appropriate but never mixes the two. Therefore we
22535 # have not corrected entries like `linux' and `xterm' that specify both.
22536 # If you see doubled characters from these, use the linux-nic and xterm-nic
22537 # entries that suppress ich/ich1. And upgrade to ncurses!
22540 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
22542 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
22543 # ECMA-48 standards are said to be almost identical, but are not the same
22544 # as X3.64 (though for practical purposes they are close supersets of it).
22546 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
22547 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
22548 # Coded Character Sets"), include your snail-mail address, and you should
22549 # receive the document in due course. Don't expect an email acknowledgment.
22551 # Related standards include "X3.4-1977: American National Standard Code for
22552 # Information Interchange" (the ASCII standard) and "X3.41.1974:
22553 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
22554 # American National Standard for Information Interchange." I believe (but
22555 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
22559 #### VT100/ANSI/ECMA-48
22561 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
22562 # and ECMA-48 Control Functions for Coded Character Sets.
22564 # Much of the content of this comment is adapted from a table prepared by
22565 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
22566 # discussion of some terminfo-related issues, and updates to capture ECMA-48
22567 # have been added. Control functions described in ECMA-48 only are tagged
22568 # with * after their names.
22570 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
22571 # sequences. In the main table, \E stands for an escape (\033) character,
22572 # SPC for space. Pn stands for a single numeric parameter to be inserted
22573 # in decimal ASCII. Ps stands for a list of such parameters separated by
22574 # semicolons. Parameter meanings for most parameterized sequences are
22575 # described in the notes.
22577 # Sequence Sequence Parameter or
22578 # Mnemonic Name Sequence Value Mode terminfo
22579 # -----------------------------------------------------------------------------
22580 # APC Applicatn Program Command \E _ - Delim -
22581 # BEL Bell * ^G - - bel
22582 # BPH Break Permitted Here * \E B - * -
22583 # BS BackSpace * ^H - EF -
22584 # CAN Cancel * ^X - - - (A)
22585 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
22586 # CCH Cancel Previous Character \E T - - -
22587 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
22588 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
22589 # CMD Coding Method Delimiter * \E
22590 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
22591 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
22592 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
22593 # CSI Control Sequence Intro \E [ - Intro -
22594 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
22595 # CUB Cursor Backward \E [ Pn D 1 eF cub
22596 # CUD Cursor Down \E [ Pn B 1 eF cud
22597 # CUF Cursor Forward \E [ Pn C 1 eF cuf
22598 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
22599 # CUU Cursor Up \E [ Pn A 1 eF cuu
22600 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
22601 # DA Device Attributes \E [ Pn c 0 - -
22602 # DAQ Define Area Qualification \E [ Ps o 0 - -
22603 # DCH Delete Character \E [ Pn P 1 eF dch
22604 # DCS Device Control String \E P - Delim -
22605 # DL Delete Line \E [ Pn M 1 eF dl
22606 # DLE Data Link Escape * ^P - - -
22607 # DMI Disable Manual Input \E \ - Fs -
22608 # DSR Device Status Report \E [ Ps n 0 - - (I)
22609 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
22610 # EA Erase in Area \E [ Ps O 0 eF - (J)
22611 # ECH Erase Character \E [ Pn X 1 eF ech
22612 # ED Erase in Display \E [ Ps J 0 eF ed (J)
22613 # EF Erase in Field \E [ Ps N 0 eF -
22614 # EL Erase in Line \E [ Ps K 0 eF el (J)
22615 # EM End of Medium * ^Y - - -
22616 # EMI Enable Manual Input \E b Fs -
22617 # ENQ Enquire ^E - - -
22618 # EOT End Of Transmission ^D - * -
22619 # EPA End of Protected Area \E W - - - (K)
22620 # ESA End of Selected Area \E G - - -
22621 # ESC Escape ^[ - - -
22622 # ETB End Transmission Block ^W - - -
22623 # ETX End of Text ^C - - -
22624 # FF Form Feed ^L - - -
22625 # FNK Function Key * \E [ Pn SPC W - - -
22626 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
22627 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
22628 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
22629 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
22630 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
22631 # HPB Char Position Backward \E [ j 1 FE -
22632 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
22633 # HT Horizontal Tab * ^I - FE - (N)
22634 # HTJ Horz Tab w/Justification \E I - FE -
22635 # HTS Horizontal Tab Set \E H - FE hts
22636 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
22637 # ICH Insert Character \E [ Pn @ 1 eF ich
22638 # IDCS ID Device Control String \E [ SPC O - * -
22639 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
22640 # IL Insert Line \E [ Pn L 1 eF il
22641 # IND Index \E D - FE -
22642 # INT Interrupt \E a - Fs -
22643 # JFY Justify \E [ Ps SPC F 0 FE -
22644 # IS1 Info Separator #1 * ^_ - * -
22645 # IS2 Info Separator #1 * ^^ - * -
22646 # IS3 Info Separator #1 * ^] - * -
22647 # IS4 Info Separator #1 * ^\ - * -
22648 # LF Line Feed ^J - - -
22649 # LS1R Locking Shift Right 1 * \E ~ - - -
22650 # LS2 Locking Shift 2 * \E n - - -
22651 # LS2R Locking Shift Right 2 * \E } - - -
22652 # LS3 Locking Shift 3 * \E o - - -
22653 # LS3R Locking Shift Right 3 * \E | - - -
22654 # MC Media Copy \E [ Ps i 0 - - (S)
22655 # MW Message Waiting \E U - - -
22656 # NAK Negative Acknowledge * ^U - * -
22657 # NBH No Break Here * \E C - - -
22658 # NEL Next Line \E E - FE nel (D)
22659 # NP Next Page \E [ Pn U 1 eF -
22660 # NUL Null * ^@ - - -
22661 # OSC Operating System Command \E ] - Delim -
22662 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
22663 # PFS Page Format Selection * \E Pn SPC J 0 - -
22664 # PLD Partial Line Down \E K - FE - (T)
22665 # PLU Partial Line Up \E L - FE - (U)
22666 # PM Privacy Message \E ^ - Delim -
22667 # PP Preceding Page \E [ Pn V 1 eF -
22668 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
22669 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
22670 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
22671 # PTX Parallel Texts * \E [ \ - - -
22672 # PU1 Private Use 1 \E Q - - -
22673 # PU2 Private Use 2 \E R - - -
22674 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
22675 # REP Repeat Char or Control \E [ Pn b 1 - rep
22676 # RI Reverse Index \E M - FE - (V)
22677 # RIS Reset to Initial State \E c - Fs -
22678 # RM Reset Mode * \E [ Ps l - - - (W)
22679 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
22680 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
22681 # SCI Single-Char Introducer \E Z - - -
22682 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
22683 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
22684 # SD Scroll Down \E [ Pn T 1 eF rin
22685 # SDS Start Directed String * \E [ Pn ] 1 - -
22686 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
22687 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
22688 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
22689 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
22690 # SI Shift In ^O - - - (P)
22691 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
22692 # SL Scroll Left \E [ Pn SPC @ 1 eF -
22693 # SLH Set Line Home * \E [ Pn SPC U - - -
22694 # SLL Set Line Limit * \E [ Pn SPC V - - -
22695 # SLS Set Line Spacing * \E [ Pn SPC h - - -
22696 # SM Select Mode \E [ Ps h none - - (W)
22697 # SO Shift Out ^N - - - (Q)
22698 # SOH Start Of Heading * ^A - - -
22699 # SOS Start of String * \E X - - -
22700 # SPA Start of Protected Area \E V - - - (Z)
22701 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
22702 # SPH Set Page Home * \E [ Ps SPC G - - -
22703 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
22704 # SPL Set Page Limit * \E [ Ps SPC j - - -
22705 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
22706 # SR Scroll Right \E [ Pn SPC A 1 eF -
22707 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
22708 # SRS Start Reversed String * \E [ Ps [ 0 - -
22709 # SSA Start of Selected Area \E F - - -
22710 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
22711 # SSW Set Space Width * \E [ Pn SPC [ none - -
22712 # SS2 Single Shift 2 (G2 set) \E N - Intro -
22713 # SS3 Single Shift 3 (G3 set) \E O - Intro -
22714 # ST String Terminator \E \ - Delim -
22715 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
22716 # STS Set Transmit State \E S - - -
22717 # STX Start pf Text * ^B - - -
22718 # SU Scroll Up \E [ Pn S 1 eF indn
22719 # SUB Substitute * ^Z - - -
22720 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
22721 # SYN Synchronous Idle * ^F - - -
22722 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
22723 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
22724 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
22725 # TBC Tab Clear \E [ Ps g 0 FE tbc
22726 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
22727 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
22728 # TSS Thin Space Specification \E [ Pn SC E none FE -
22729 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
22730 # VPB Line Position Backward * \E [ Pn k 1 FE -
22731 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
22732 # VT Vertical Tabulation * ^K - FE -
22733 # VTS Vertical Tabulation Set \E J - FE -
22735 # ---------------------------------------------------------------------------
22739 # Some control characters are listed in the ECMA-48 standard without
22740 # being assigned functions relevant to terminal control there (they
22741 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
22742 # here anyway for completeness.
22744 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
22746 # (B) There seems to be some confusion abroad between CHA and HPA. Most
22747 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
22748 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
22749 # preserved the CHA abbreviation.
22751 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
22752 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
22753 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
22754 # CHT abbreviation.
22756 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
22758 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
22761 # (F) CTC parameter values:
22762 # 0 = set char tab,
22763 # 1 = set line tab,
22764 # 2 = clear char tab,
22765 # 3 = clear line tab,
22766 # 4 = clear all char tabs on current line,
22767 # 5 = clear all char tabs,
22768 # 6 = clear all line tabs.
22770 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
22771 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
22772 # Position Absolute" but retains the HVP abbreviation.
22774 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
22777 # (I) DSR parameter values:
22780 # 2 = busy, will send DSR later,
22782 # 4 = malfunction, will send DSR later,
22784 # 6 = request CPR response.
22786 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
22787 # 0 = clear to end,
22788 # 1 = clear from beginning,
22791 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
22793 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
22795 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
22796 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
22797 # Position Relative" but retains the HPR abbreviation.
22799 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
22802 # (O) SGR parameter values:
22803 # 0 = default mode (attributes off),
22810 # 7 = reverse video,
22812 # 9 = crossed-out (marked for deletion),
22813 # 10 = primary font,
22814 # 10 + n (n in 1..9) = nth alternative font,
22816 # 21 = double underline,
22821 # 26 = proportional spacing,
22833 # 38 = set fg color as in CCITT T.416,
22834 # 39 = set default fg color,
22843 # 48 = set bg color as in CCITT T.416,
22844 # 49 = set default bg color,
22845 # 50 = turn off 26,
22849 # 54 = turn off 51 & 52,
22850 # 55 = not overlined,
22851 # 56-59 = reserved,
22852 # 61-65 = variable highlights for ideograms.
22854 # (P) SI is also called LSO, Locking Shift Zero.
22856 # (Q) SI is also called LS1, Locking Shift One.
22858 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
22859 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
22860 # Absolute' but retains the VPA abbreviation.
22862 # (S) MC parameters:
22863 # 0 = start xfer to primary aux device,
22864 # 1 = start xfer from primary aux device,
22865 # 2 = start xfer to secondary aux device,
22866 # 3 = start xfer from secondary aux device,
22867 # 4 = stop relay to primary aux device,
22868 # 5 = start relay to primary aux device,
22869 # 6 = stop relay to secondary aux device,
22870 # 7 = start relay to secondary aux device.
22872 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
22875 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
22878 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
22880 # (W) RM/SM modes are as follows:
22881 # 1 = Guarded Area Transfer Mode (GATM),
22882 # 2 = Keyboard Action Mode (KAM),
22883 # 3 = Control Representation Mode (CRM),
22884 # 4 = Insertion Replacement Mode (IRM),
22885 # 5 = Status Report Transfer Mode (SRTM),
22886 # 6 = Erasure Mode (ERM),
22887 # 7 = Line Editing Mode (LEM),
22888 # 8 = Bi-Directional Support Mode (BDSM),
22889 # 9 = Device Component Select Mode (DCSM),
22890 # 10 = Character Editing Mode (HEM),
22891 # 11 = Positioning Unit Mode (PUM),
22892 # 12 = Send/Receive Mode (SRM),
22893 # 13 = Format Effector Action Mode (FEAM),
22894 # 14 = Format Effector Transfer Mode (FETM),
22895 # 15 = Multiple Area Transfer Mode (MATM),
22896 # 16 = Transfer Termination Mode (TTM),
22897 # 17 = Selected Area Transfer Mode (SATM),
22898 # 18 = Tabulation Stop Mode (TSM),
22899 # 19 = Editing Boundary Mode (EBM),
22900 # 20 = Line Feed New Line Mode (LF/NL),
22901 # 21 = Graphic Rendition Combination Mode (GRCM),
22902 # 22 = Zero Default Mode (ZDM).
22904 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
22905 # but are listed here for reference.
22907 # (X) Select Alternate Presentation Variants is used only for non-Latin
22910 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
22912 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
22915 # ---------------------------------------------------------------------------
22919 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
22920 # X3.64 Control Sequence Introducer is the two characters "Escape ["
22922 # Delim a Delimiter
22924 # x/y identifies a character by position in the ASCII table (column/row)
22926 # eF editor function (see explanation)
22928 # FE format effector (see explanation)
22930 # F is a Final character in
22931 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
22932 # a control sequence (F from 4/0 to 7/14)
22934 # Gs is a graphic character appearing in strings (Gs ranges from
22935 # 2/0 to 7/14) in the ASCII table
22937 # Ce is a control represented as a single bit combination in the C1 set
22938 # of controls in an 8-bit character set
22940 # C0 the familiar set of 7-bit ASCII control characters
22942 # C1 roughly, the set of control chars available only in 8-bit systems.
22943 # This is too complicated to explain fully here, so read Jim Fleming's
22944 # article in the February 1983 BYTE, especially pages 214 through 224.
22946 # Fe is a Final character of a 2-character Escape sequence that has an
22947 # equivalent representation in an 8-bit environment as a Ce-type
22948 # (Fe ranges from 4/0 to 5/15)
22950 # Fs is a Final character of a 2-character Escape sequence that is
22951 # standardized internationally with identical representation in 7-bit
22952 # and 8-bit environments and is independent of the currently
22953 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
22955 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
22958 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
22961 # Pn is a numeric parameter in a control sequence, a string of zero or
22962 # more characters ranging from 3/0 to 3/9 in the ASCII table
22964 # Ps is a variable number of selective parameters in a control sequence
22965 # with each selective parameter separated from the other by the code
22966 # 3/11 (which usually represents a semicolon); Ps ranges from
22967 # 3/0 to 3/9 and includes 3/11
22969 # * Not relevant to terminal control, listed for completeness only.
22971 # Format Effectors versus Editor Functions
22973 # A format effector specifies how following output is to be displayed.
22974 # An editor function allows you to modify the display. Informally
22975 # format effectors may be destructive; format effectors should not be.
22977 # For instance, a format effector that moves the "active position" (the
22978 # cursor or equivalent) one space to the left would be useful when you want to
22979 # create an overstrike, a compound character made of two standard characters
22980 # overlaid. Control-H, the Backspace character, is actually supposed to be a
22981 # format effector, so you can do this. But many systems use it in a
22982 # nonstandard fashion, as an editor function, deleting the character to the
22983 # left of the cursor and moving the cursor left. When Control-H is assumed to
22984 # be an editor function, you cannot predict whether its use will create an
22985 # overstrike unless you also know whether the output device is in an "insert
22986 # mode" or an "overwrite mode". When Control-H is used as a format effector,
22987 # its effect can always be predicted. The familiar characters carriage
22988 # return, linefeed, formfeed, etc., are defined as format effectors.
22990 # NOTES ON THE DEC VT100 IMPLEMENTATION
22992 # Control sequences implemented in the VT100 are as follows:
22994 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
22995 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
22997 # plus several private DEC commands.
22999 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
23001 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
23002 # Erase from beginning of line to cursor Esc [ 1 K
23003 # Erase line containing cursor Esc [ 2 K
23004 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
23005 # Erase from beginning of screen to cursor Esc [ 1 J
23006 # Erase entire screen Esc [ 2 J
23008 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
23009 # Esc [ 2 J, but this is wrong; the default is 0.
23011 # The VT100 responds to receiving the DA (Device Attributes) control
23013 # Esc [ c (or Esc [ 0 c)
23015 # by transmitting the sequence
23019 # where Ps is a character that describes installed options.
23021 # The VT100's cursor location can be read with the DSR (Device Status
23026 # The VT100 reports by transmitting the CPR sequence
23030 # where Pl is the line number and Pc is the column number (in decimal).
23032 # The specification for the DEC VT100 is document EK-VT100-UG-003.
23036 # Here is a description of the color and attribute controls supported in the
23037 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
23038 # terminal emulators for Intel boxes obey these. They are a proper subset
23039 # of the ECMA-48 escapes.
23041 # 0 all attributes off
23042 # 1 foreground bright
23044 # 5 blink on/background bright (not reliable with brown)
23046 # 8 set blank (non-display)
23047 # 10 set primary font
23048 # 11 set first alternate font (on PCs, display ROM characters 1-31)
23049 # 12 set second alternate font (on PCs, display IBM high-half chars)
23051 # Color attribute sets
23052 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
23053 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
23054 # Bright black becomes gray. Bright brown becomes yellow,
23055 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
23057 # * If the 5 attribute is on and you set a background color (40-47) it is
23058 # supposed to enable bright background.
23060 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
23061 # when you try to set a "bright brown" (yellow) background with attribute
23062 # 5 (you get a blinking yellow foreground instead). A few displays
23063 # (including the System V console) support an attribute 6 that undoes this
23064 # braindamage (this is required by iBCS2).
23066 # * Some older versions of ANSI.SYS have a bug that causes thems to require
23067 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
23070 #### Intel Binary Compatibility Standard
23072 # For comparison, here are the capabilities implied by the Intel Binary
23073 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
23074 # These recommendations are optional. IBCS2 allows the leading escape to
23075 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
23076 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
23077 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
23078 # terminfo entry are followed with the corresponding capability in parens:
23080 # CSI <n>k disable (n=0) or enable (n=1) keyclick
23081 # CSI 2h lock keyboard
23082 # CSI 2i send screen as input
23083 # CSI 2l unlock keyboard
23084 # CSI 6m enable background color intensity
23085 # CSI <0-2>c reserved
23086 # CSI <0-59>m select graphic rendition
23087 # CSI <n>;<m>H (cup) cursor to line n and column m
23088 # CSI <n>;<m>f cursor to line n and column m
23089 # CSI <n>@ (ich) insert characters
23090 # CSI <n>A (cuu) cursor up n lines
23091 # CSI <n>B (cud) cursor down n lines
23092 # CSI <n>C (cuu) cursor right n characters
23093 # CSI <n>D (cud) cursor left n characters
23094 # CSI <n>E cursor down n lines and in first column
23095 # CSI <n>F cursor up n lines and in first column
23096 # CSI <n>G (hpa) position cursor at column n-1
23097 # CSI <n>J (ed) erase in display
23098 # CSI <n>K (el) erase in line
23099 # CSI <n>L (il) insert line(s)
23100 # CSI <n>P (dch) delete characters
23101 # CSI <n>S (indn) scroll up n lines
23102 # CSI <n>T (rin) scroll down n lines
23103 # CSI <n>X (ech) erase characters
23104 # CSI <n>Z (cbt) back up n tab stops
23105 # CSI <n>` cursor to column n on line
23106 # CSI <n>a (cuu) cursor right n characters
23107 # CSI <n>d (vpa) cursor to line n
23108 # CSI <n>e cursor down n lines and in first column
23109 # CSI <n>g (cbt) clear all tabs
23110 # CSI <n>z make virtual terminal n active
23111 # CSI ?7h (smam) turn automargin on
23112 # CSI ?7l (rmam) turn automargin off
23113 # CSI s save cursor position
23114 # CSI u restore cursor position to saved value
23115 # CSI =<c>A set overscan color
23116 # CSI =<c>F set normal foreground color
23117 # CSI =<c>G set normal background color
23118 # CSI =<c>H set reverse foreground color
23119 # CSI =<c>I set reverse foreground color
23120 # CSI =<c>J set graphic foreground color
23121 # CSI =<c>K set graphic foreground color
23122 # CSI =<n>g (dispc) display n from alternate graphics character set
23123 # CSI =<p>;<d>B set bell parameters
23124 # CSI =<s>;<e>C set cursor parameters
23125 # CSI =<x>D enable/disable intensity of background color
23126 # CSI =<x>E set/clear blink vs. bold background
23127 # CSI 7 (sc) (sc) save cursor position
23128 # CSI 8 (rc) (rc) restore cursor position to saved value
23129 # CSI H (hts) (hts) set tab stop
23130 # CSI Q<n><string> define function key string
23131 # (string must begin and end with delimiter char)
23132 # CSI c (clear) clear screen
23134 # The lack of any specification for attributes in SGR (among other things)
23135 # makes this a wretchedly weak standard. The table above is literally
23136 # everything iBSC2 has to say about terminal escape sequences; there is
23137 # no further discussion of their meaning or how to set the parameters
23138 # in these sequences at all.
23141 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23143 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23144 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23145 # with the extension names chosen for compatibility with the termcap names
23146 # assigned in System V terminfo. There are some variant extension sets out
23147 # there. We try to describe them here.
23149 #### XENIX extensions:
23151 # The XENIX extensions include a set of function-key capabilities as follows:
23153 # code XENIX variable name terminfo name name clashes?
23154 # ---- ------------------- ------------- -----------------------
23156 # CR key_char_right
23157 # CW key_change_window create_window
23159 # HM key_home khome
23161 # LD key_delete_line kdl1
23162 # LF key_linefeed label_off
23163 # NU key_next_unlocked_cell
23164 # PD key_page_down knp
23166 # PN start_print mc5
23168 # PS stop_print mc4
23169 # PU key_page_up kpp pulse
23170 # RC key_recalc remove_clock
23171 # RF key_toggle_ref req_for_input
23172 # RT key_return kent
23173 # UP key_up_arrow kcuu1 parm_up_cursor
23175 # WR key_word_right
23177 # The XENIX extensions also include the following character-set and highlight
23180 # XENIX terminfo function
23181 # ----- -------- ------------------------------
23182 # GS smacs start alternate character set
23183 # GE rmacs end alternate character set
23184 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23185 # bo blink begin blink (not used in /etc/termcap)
23186 # be end blink (not used in /etc/termcap)
23187 # bb blink glitch (not used in /etc/termcap)
23188 # it dim begin dim (not used in /etc/termcap)
23189 # ie end dim (not used in /etc/termcap)
23190 # ig dim glitch (not used in /etc/termcap)
23192 # Finally, XENIX also used the following forms-drawing capabilities:
23194 # single double type ASCII approximation
23195 # ------ ------ ------------- -------------------
23196 # GV Gv vertical line |
23197 # GH Gv horizontal line - _
23198 # G1 G5 top right corner _ |
23199 # G2 G6 top left corner |
23200 # G3 G7 bottom left corner |_
23201 # G4 G8 bottom right corner _|
23202 # GD Gd down-tick character T
23203 # GL Gl left-tick character -|
23204 # GR Gr right-tick character |-
23205 # GC Gc middle intersection -|-
23206 # GU Gu up-tick character _|_
23208 # These were invented to take advantage of the IBM PC ROM character set. One
23209 # can compose an acsc string from the single-width characters as follows
23210 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23211 # When translating a termcap file, ncurses tic will do this automatically.
23212 # The double forms characters don't fit the SVr4 terminfo model.
23214 #### AT&T Extensions:
23216 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23217 # nonstandard capabilities. Its signature is the KM capability, used to name
23218 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23219 # set. Comments in the original, and a little cross-checking with other AT&T
23220 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23221 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23222 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23223 # cursor invisible), and CV=:ve: (make cursor normal).
23227 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23228 # have the System V capabilities up to SVr1 level. After that, it supports
23229 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23230 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23231 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23232 # HP binary format incompatible with SVr4's.
23234 #### IBM Extensions
23236 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23237 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23238 # capabilities following prtr_non with the following special capabilities:
23239 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23240 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23241 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23242 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23243 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23244 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23245 # correspond to acsc chars, here is the mapping:
23247 # box1[0] = ACS_ULCORNER
23248 # box1[1] = ACS_HLINE
23249 # box1[2] = ACS_URCORNER
23250 # box1[3] = ACS_VLINE
23251 # box1[4] = ACS_LRCORNER
23252 # box1[5] = ACS_LLCORNER
23253 # box1[6] = ACS_TTEE
23254 # box1[7] = ACS_RTEE
23255 # box1[8] = ACS_BTEE
23256 # box1[9] = ACS_LTEE
23257 # box1[10] = ACS_PLUS
23259 # The box2 characters are the double-line versions of these forms graphics.
23260 # The AIX binary terminfo format is incompatible with SVr4's.
23262 #### Iris console extensions:
23264 # HS is half-intensity start; HE is half-intensity end
23265 # CT is color terminal type (for Curses & rogue)
23266 # CP is color change escape sequence
23267 # CZ are color names (for Curses & rogue)
23269 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23271 #### TC Extensions:
23273 # There is a set of extended termcaps associated with something
23274 # called the "Terminal Control" or TC package created by MainStream Systems,
23275 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23276 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23277 # that flags color terminals.
23279 ######## NCURSES USER-DEFINABLE CAPABILITIES
23281 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
23282 # infocmp to manipulate user-definable capabilities. Those that are intended
23283 # for use in either terminfo or termcap use 2-character names. Extended
23284 # function keys do not use 2-character names, and are available only with
23287 # As of mid-2012, no other terminfo/termcap implementation than ncurses
23288 # supports this extension; termcap libraries can as noted above make limited
23289 # use of the feature.
23291 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
23294 #### SCREEN Extensions:
23296 # The screen program uses the termcap interface. It recognizes a few useful
23297 # nonstandard capabilities. Those are used in this file.
23299 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
23301 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
23302 # E0 (str) Switch charset 'G0' back to standard charset.
23303 # S0 (str) Switch charset 'G0' to the specified charset.
23304 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
23307 # AX is relatively straightforward; it is interpreted by ncurses to say that
23308 # SGR 39/49 reset the terminal's foreground and background colors to their
23311 # XT is harder, since screen's manpage does not give more details. For that,
23312 # we must read screen's source-code. When XT is set, screen assumes
23314 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
23315 # screen may also set the terminal's name, which is (for xterm) distinct
23316 # from the icon name.
23317 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
23318 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
23319 # this is an rxvt feature.
23320 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
23321 # These are from xterm, although xterm accepts mouse codes that may not be
23322 # recognized by screen, e.g., 1005, 1006.
23323 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
23324 # sequence. However, because screen uses only termcap, the values returned
23325 # by Af/Ab are not usable because they rely on expressions that termcap
23326 # does not support. Therefore, screen uses a hardcoded string to work
23327 # around the limitation.
23328 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
23330 # The other ISO-2022 features are rarely used, but provided here to make
23331 # screen's termcap features available.
23333 #### XTERM Extensions:
23335 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
23336 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
23337 # additional function-key strings. Some other developers copied the feature,
23338 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
23339 # these key definitions less ambiguous.
23341 # A few terminals provide similar functionality (sending distinct keys when
23342 # a modifier is used), including rxvt.
23344 # These are the extended keys defined in this file:
23346 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
23347 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
23348 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
23349 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
23351 # Here are the other xterm-related extensions which are used in this file:
23353 # Cr is a string capability which resets the cursor color
23354 # Cs is a string capability which sets the cursor color to a given value.
23355 # The single string parameter is the color name/number, according to the
23357 # Ms modifies the selection/clipboard. Its parameters are
23358 # p1 = the storage unit (clipboard, selection or cut buffer)
23359 # p2 = the base64-encoded clipboard content.
23360 # Se resets the cursor style to the terminal power-on default.
23361 # Ss is a string capability with one numeric parameter. It is used to set the
23362 # cursor style as described by the DECSCUSR function to a block or
23364 # TS is a string capability which acts like "tsl", but uses no parameter and
23365 # goes to the first column of the "status line".
23366 # XM is a string capability which overrides ncurses's built-in string which
23367 # enables/disables xterm mouse mode.
23368 # xm shows the format of the mouse responses. Parameters are (from zero):
23372 # p4 = state, e.g., pressed or released
23373 # p6 = y-ordinate starting region
23374 # p7 = x-ordinate starting region
23375 # p8 = y-ordinate ending region
23376 # p9 = x-ordinate ending region
23377 # Other extensions, used in xm:
23380 #### Miscellaneous extensions:
23382 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
23383 # This was implemented for the Hurd.
23384 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
23385 # experimental feature of tmux.
23386 # E3 clears the terminal's scrollback buffer. This was implemented in the
23387 # Linux 3.0 kernel as a security feature. It matches a feature which was
23388 # added in xterm patch #107.
23389 # U8 is a numeric capability which denotes a terminal emulator which does not
23390 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
23391 # value to enable it.
23393 ######## CHANGE HISTORY
23395 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
23396 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
23397 # maintained by Eric S. Raymond as part of the ncurses project.
23399 # This file contains all the capability information present in John Kunze's
23400 # last version of the termcap master file, except as noted in the change
23401 # comments at end of file. Some information about very ancient obsolete
23402 # capabilities has been moved to comments. Some all-numeric names of older
23403 # terminals have been retired.
23405 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
23406 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
23407 # used by BSD curses.
23409 # The 9.1.0 version of this file was translated from my lightly-edited copy of
23410 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
23411 # the purpose. Unless the ncurses tic implementation and the Lisp code were
23412 # making perfectly synchronized mistakes which I then failed to catch by
23413 # eyeball, the translation was correct and perfectly information-preserving.
23415 # Major version number bumps correspond to major version changes in ncurses.
23417 # Here is a log of the changes since then:
23419 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
23420 # * First terminfo master translated from 8.3.
23421 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
23422 # * Replaced Wyse entries with updated entries supplied by vendor.
23424 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
23425 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
23426 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
23427 # * Better XENIX keycap translation. Describe TC termcaps.
23428 # * Contact and history info supplied by Qume.
23429 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
23430 # * Raided the Shuford FTP site for recent termcaps/terminfos.
23431 # * Added information on X3.64 and VT100 standard escape sequences.
23432 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
23433 # * Added a correct X11R6 xterm entry.
23434 # * Fixed terminfo translations of padding.
23435 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
23436 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
23437 # * Added u6/u7/u8/u9 capabilities.
23438 # * Added PCVT entry.
23439 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
23440 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
23441 # to use reverse-video standout so Emacs will look right.
23442 # * Added el1 capability to ansi.
23443 # * Added smacs/rmacs to ansi.sys.
23445 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
23446 # * New mt70 entry.
23447 # * Added COPYRIGHTS AND OTHER DELUSIONS.
23448 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
23449 # smartvid & smarterm, ampex 175 & 219 & 232,
23450 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
23451 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
23452 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
23453 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
23454 # * Replaced the Perkin-Elmer entries with vendor's official ones.
23455 # * Restored the old minimal-ansi entry, luna needs it.
23456 # * Fixed some incorrect ip and proportional-padding translations.
23457 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
23458 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
23459 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
23460 # to force a particular height.
23461 # * Added beehive4 and reorganized other Harris entries.
23462 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
23463 # * Merged in DEC's official entries for its terminals. The only old
23464 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
23465 # * Replaced the translated BBN BitGraph entries with purpose-built
23466 # ones from AT&T's SVr3.
23467 # * Replaced the AT&T entries with AT&T's official terminfos.
23468 # * Added teleray 16, vc415, cops10.
23469 # * Merged in many individual capabilities from SCO terminfo files.
23470 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
23472 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
23473 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
23474 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
23475 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
23476 # simterm, citoh and variants.
23477 # * Replaced sol entry with sol1 and sol2.
23478 # * Replaced Qume QVT and Freedom-series entries with purpose-built
23479 # terminfo entries.
23480 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
23481 # and dg200 entries using caps from from SCO.
23482 # * Added the usual set of function-key mappings to ANSI entry.
23483 # * Corrected xterm's function-key capabilities.
23484 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
23485 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
23486 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
23487 # * Fix in xterm entry, get the arrow keys right.
23488 # * Change some \0 escapes to \200.
23489 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
23490 # * Added apple (Videx card), adm1a, oadm31.
23491 # * Fixed malformed ampex csr.
23492 # * Fixed act4, cyb110; they had old-style prefix padding left in.
23493 # * Changed mandatory to advisory padding in many entries.
23494 # * Replaced HP entries up to hpsub with purpose-built ones.
23495 # * Blank rmir/smir/rmdc/smdc capabilities removed.
23496 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
23497 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
23498 # * Replaced the Ann Arbor entries with SCO's, the init strings are
23499 # more efficient (but the entries otherwise identical).
23500 # * Added dg211 from Shuford archive.
23501 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
23502 # adm42-nl, pc52, gs6300, xerox820, uts30.
23503 # * Pull SCO's padding into vi200 entry.
23504 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
23505 # entries merged in from SCO's descriptions.
23506 # * Fixed old-style prefix padding on zen50, h1500.
23507 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
23508 # entry from SCO's description.
23509 # * Reorganized the special entries.
23510 # * Added lm#0 to cbunix and virtual entries.
23512 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
23513 # * Restored cdc456tst.
23514 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
23515 # * Added megatek, beacon, microkit.
23516 # * Freeze for ncurses-1.9 release.
23517 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
23518 # * Added historical data for TAB.
23519 # * Comment fixes from David MacKenzie.
23520 # * Added the new BSDI pc3 entry.
23521 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
23522 # * A change in the tic -C logic now ensures that all entries in
23523 # the termcap translation will fit in < 1024 bytes.
23524 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
23525 # from GNU termcap file. This merges in all their local information.
23526 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
23527 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
23528 # * Added warnings about entries with long translations (restoring
23529 # all the GNU termcaps pushes a few over the edge).
23530 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
23531 # * Yet another tic change, and a couple of entry tweaks, to reduce the
23532 # number of long (> 1024) termcap translations back to 0.
23534 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
23535 # * Added kf13-kf20 to Linux entry.
23536 # * Regularize Prime terminal names.
23537 # * Historical data on Synertek.
23538 # * Freeze for ncurses-1.9.1.
23539 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
23540 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
23541 # * Eliminate whitespace in short name fields, this tanks some scripts.
23542 # * Name field changes to shorten some long entries.
23543 # * Termcap translation now automatically generates empty rmir/smir
23544 # when ich1/ich is present (copes with an ancient vi bug).
23545 # * Added `screen' entries from FSF's screen-3.6.2.
23546 # * Added linux-nic and xterm-nic entries.
23547 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
23548 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
23549 # eliminating some special-case code in ncurses.
23551 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
23552 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
23553 # that captures everything unique from it.
23554 # * Added reorder script generator.
23555 # * Freeze for ncurses 1.9.2 release.
23556 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
23557 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
23558 # * Added Olaf Siebert's corrections for adm12.
23559 # * ansi-pc-color now includes the colors and pairs caps, so that
23560 # entries which use it will inherit them automatically.
23561 # * The linux entry can now recognize the center (keypad 5) key.
23562 # * Removed some junk that found its way into Linux acsc.
23564 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
23565 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
23566 # * xterm doesn't try to use application keypad mode any more.
23567 # * Freeze for ncurses-1.9.3 release.
23568 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
23569 # * Added corrected sun entry from vendor.
23570 # * Added csr capability to linux entry.
23571 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
23572 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
23573 # * Some commented-out caps in long entries come back in, my code
23574 # for computing string-table lengths had a bug in it.
23575 # * pcansi series modified to fit comm-program reality better.
23576 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
23577 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
23578 # * Correct some bad aliases in the pcansi series
23579 # * Added entry for QNX console.
23580 # * Clean up duplicate long names for use with 4.4 library.
23581 # * Change vt100 standout to be normal reverse vide, not bright reverse;
23582 # this makes the Emacs status line look better.
23583 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
23584 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
23585 # * Minor surgery, mostly on name strings, to shorten termcap version.
23587 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
23588 # * Added dec-vt100 for use with the EWAN emulator.
23589 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
23590 # * Freeze for 1.9.5 alpha release.
23591 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
23592 # * Changed xterm lines to 24, the X11R6 default.
23593 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
23594 # * Added 7 newly discovered, undocumented acsc characters to linux
23595 # entry (the pryz{|} characters).
23596 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
23597 # * Correct two typos in the xterm entries introduced in 9.9.1.
23598 # * I finally figured out how to translate ko capabilities. Done.
23599 # * Added tvi921 entries from Tim Theisen.
23600 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
23601 # * Removed mystery tec entry, it was neither interesting nor useful.
23602 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
23603 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
23604 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
23605 # by making them relative to use capabilities
23606 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
23607 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
23608 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
23610 # * Translate all home=\E[;H capabilities to home=\E[H, they're
23612 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
23613 # vt100 and ANSI-like terminals.
23614 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
23615 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
23616 # does this now, too.
23617 # * fviewpoint is gone, it duplicated screwpoint.
23618 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
23619 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
23620 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
23621 # The UW vi50 replaces the old one, which becomes vi50adm,
23622 # * No more embedded commas in name fields.
23624 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
23625 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
23626 # * Introduced klone+* entries for describing Intel-console behavior.
23627 # * Linux kbs is default-mapped to delete for some brain-dead reason.
23628 # * -nsl -> -ns. The -pp syntax is obsolete.
23629 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
23630 # * Make xterm entry do application-keypad mode again. I got complaints
23631 # that it was messing up someone's 3270 emulator.
23632 # * Added some longname fields in order to avoid warning messages from
23633 # older tic implementations.
23634 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
23635 # it! (This gives us pi, greater than, less than, and a few more.)
23636 # * Freeze for ncurses-1.9.6 release.
23637 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
23638 # * Add xon to a number of console entries, they're memory-mapped and
23639 # don't need padding.
23640 # * Correct the use dependencies in the ansi series.
23641 # * Hand-translate more XENIX capabilities.
23642 # * Added hpterm entry for HP's X terminal emulator.
23643 # * Added aixterm entries.
23644 # * Shortened four names so everything fits in 14 chars.
23646 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
23647 # * Added ibcs2 entry and info on iBCS2 standard.
23648 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
23649 # * We can handle the HP meml/memu capability now.
23650 # * Added smacs to klone entries, just as documentation.
23651 # * Corrected ansi.sys and cit-500 entries.
23652 # * Added z39, vt320-k311, v220c, and avatar entries.
23653 # * Make pcansi use the ansi.sys invis capability.
23654 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
23655 # tvi925, tvi950, dt80, ncr7900i, h19.
23656 # * X3.64 has been withdrawn, change some references.
23657 # * Removed function keys from ansi-m entry.
23658 # * Corrected ansi.sys entry.
23659 # * Freeze for ncurses-1.9.7 release.
23660 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
23661 # * Added rmam/smam capabilities to many entries based on init strings.
23662 # * Added correct hpa/vpa to linux.
23663 # * Reduced several entries relative to vt52.
23664 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
23665 # * Exiled some utterly unidentifiable custom and homebrew types to the
23666 # UFO file; also, obsolete small-screen hardware; also, entries which
23667 # look flat-out incorrect, garbled, or redundant. These include the
23668 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
23669 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
23670 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
23671 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
23672 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
23673 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
23674 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
23675 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
23676 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
23677 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
23678 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
23679 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
23680 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
23681 # * Corrected pcvt25h as suggested by Brian C. Grayson
23682 # <bgrayson@pine.ece.utexas.edu>.
23683 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
23684 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
23685 # * Added kent=\EOM to xterm entry.
23687 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
23688 # * Corrected gigi entry.
23689 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
23690 # bad hpa/vpa capabilities.
23691 # * Corrected flash strings to have a uniform delay of .2 sec. No
23692 # more speed-dependent NUL-padding!
23693 # * terminfo capabilities in comments bracketed with <>.
23694 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
23695 # * Replaced pcvt with the 3.31 pcvt entries.
23696 # * Freeze for 1.9.7a.
23697 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
23698 # * Added emu entry from the X11R6 contrib tape sources.
23700 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
23701 # * Improved iris-ansi and sun entries.
23702 # * More flash string improvements.
23703 # * Corrected wy160 & wy160 as suggested by Robert Dunn
23704 # * Added dim to at386.
23705 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
23706 # he's ready to start using the termcap generated from this one.
23707 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
23708 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
23709 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
23710 # att610, att620, att630,
23711 # * Changed hazeltine name prefix from h to hz.
23712 # * Sent t500 to the UFI file.
23713 # * I think we've sucked all the juice out of BSDI's termcap file now.
23714 # * Freeze for ncurses 1.9.8 release
23715 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
23716 # * Unfreeze, linux kbs needed to be fixed.
23717 # * Tim Theisen pinned down a bug in the DMD firmware.
23718 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
23719 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
23720 # (The broken ones had been shadowed by sgr.)
23721 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
23722 # * Added documentation on ECMA-48 standard.
23723 # * New Amiga entry.
23724 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
23725 # * More ECMA-48 stuff
23726 # * Corrected typo in minix entry, added pc-minix.
23727 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
23728 # * Added rxvt entry.
23729 # * Added 1.3.x color-change capabilities to linux entry.
23730 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
23731 # * Corrected rxvt entry khome/kend.
23732 # * Corrected linux color change capabilities.
23733 # * NeXT entries from Dave Wetzel.
23734 # * Cleaned up if and rf file names (all in /usr/share now).
23735 # * Changed linux op capability to avoid screwing up a background color
23736 # pair set by setterm.
23737 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
23738 # * Added xterm-sun.
23739 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
23742 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
23743 # * Another sweep through the Shuford archive looking for new info.
23744 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
23745 # * Added st52 from Per Persson.
23746 # * Added eterm from the GNU Emacs 19.30 distribution.
23747 # * Freeze for 1.9.9.
23748 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
23749 # * FreeBSD console entries from Andrew Chernov.
23750 # * Removed duplicate Atari st52 name.
23751 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
23752 # * xterm doesn't actually have ACS_BLOCK.
23753 # * Change klone+color setf/setb to simpler forms that can be
23754 # translated into termcap.
23756 # * Removed mechanically-generated junk capabilities from cons* entries.
23757 # * Added color support to bsdos.
23758 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
23759 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
23760 # * Created ecma+color, linux can use it. Also added ech to linux.
23761 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
23762 # * Add descriptions to FreeBSD console entries. Also shorten
23763 # some aliases to <= 14 chars for portability.
23764 # * Added x68k console
23765 # * Added OTbs to several VT-series entries.
23766 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
23767 # * screen entry update for 3.7.1 from Michael Alan Dorman.
23768 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
23769 # * kterm correction due to Kenji Rikitake.
23770 # * ACS correction in vt320-kll due to Phillippe De Muyter.
23771 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
23772 # * Sun console entry correction from J.T. Conklin.
23773 # * Changed all DEC VT300 and up terminals to use VT300 tab set
23774 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
23775 # * Added smul to linux entry (we never noticed it was missing
23776 # because of sgr!).
23777 # * Added rmln to hp+labels (deduced from other HP entries).
23778 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
23779 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
23780 # * Corrected vt220 acsc.
23781 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
23782 # this corresponds to reality and helps prevent some tic warnings.
23783 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
23784 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
23785 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
23786 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
23787 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
23788 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
23789 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
23790 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
23791 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
23792 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
23793 # ifmr, v3220, wy100q, tandem653, ibmaed.
23794 # * Added DWK terminal description.
23795 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
23796 # * Many entries now have highlights inherited from adm+sgr.
23797 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
23798 # * xtitle and xtitle-twm enable access to the X status line.
23799 # * Added linux-1.3.6 color palette caps in conventional format.
23800 # * Added adm1178 terminal.
23801 # * Move fos and apollo terminals to obsolete category.
23802 # * Aha! The BRL terminals file told us what the Iris extensions mean.
23803 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
23804 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
23806 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
23807 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
23808 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
23809 # * Corrected, from BRL termcap file: vi50.
23810 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
23811 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
23812 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
23813 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
23814 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
23815 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
23816 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
23817 # * Paired-attribute fixes to various terminals.
23818 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
23819 # * xterm entry corrections from Thomas Dickey.
23820 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
23821 # * Added t916 entry, translated from a termcap in SCO's support area.
23822 # * New qnx entry from Michael Hunter.
23823 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
23824 # * Added hpex2 from Ville Sulko.
23825 # * Fixed a bug that ran the qnx and pcvtXX together.
23826 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
23827 # * Added dtterm entry from Solaris CDE.
23828 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
23829 # * corrected pairs#8 typo in dtterm entry.
23831 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
23832 # * updated xterm entry to cover 3.1.2E's new features.
23833 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
23834 # * Added new minix entry
23835 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
23836 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
23837 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
23838 # * Added Prism entries and kt7ix.
23839 # * Caution notes about EWAN and tabset files.
23840 # * Changed /usr/lib/tabset -> /usr/share/tabset.
23841 # * Added acsc/rmacs/smacs to vt52.
23842 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
23843 # * Merged in Thomas Dickey's reorganization of the xterm entries;
23844 # added technical corrections to avoid warning messages.
23845 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
23846 # * Added rmso=\E[27m in Linux entry.
23847 # * Added koi8-r support for Linux console.
23848 # * Replace xterm entries with canonical ones from XFree86 3.2.
23849 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
23850 # * Added color_xterm from Jacob Mandelson
23851 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
23852 # * Back off the xterm entry to use r6 as a base.
23853 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
23854 # * Added dec-vt220 at Adrian Garside's request.
23856 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
23858 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
23859 # * Minor corrections to xterm entries.
23860 # * Replaced EWAN telnet entry.
23861 # * Dropped the reorder script generator. It was a fossil.
23862 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23863 # * Replaced minitel-2 entry.
23864 # * Added MGR, ansi-nt.
23865 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23866 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23867 # the 4.4BSD Lite2 file.
23869 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
23870 # * Use setaf/setab consistently with SVr4.
23871 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
23872 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
23873 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
23874 # * add xterm-16color, for XFree86 3.3
23875 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
23876 # * correct typo in emu
23877 # * correct typo in vt102-w (Robert Wuest)
23878 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
23879 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
23880 # * remove ech capability from rxvt (it does the wrong thing)
23881 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
23882 # * remove spurious newlines from several entries (hp+color, wy50,
23883 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
23885 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
23886 # * correct rmso capability of wy50-mc
23887 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
23888 # * add cbt to xterm-xf86-v32
23889 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
23890 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
23891 # other capabilities not in xterm-r6.
23892 # * remove alternate character set from kterm entry.
23893 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
23894 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
23895 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
23896 # * add xterm-8bit entry.
23897 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
23898 # * repair several places where early version of tic replaced \, with \\\,
23899 # * make acsc entries canonical form (sorted, uniq).
23900 # * modify acsc entries for linux, linux-koi8
23901 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
23902 # * add color, mouse support to kterm.
23903 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
23904 # * correct wy120 smxon/tbc capabilities which were stuck together.
23905 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
23906 # * add entry for xterm-xf86-v39t
23907 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
23908 # * add u8,u9 to sun-il description
23909 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
23910 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
23912 # * add hds200 description (Walter Skorski)
23913 # * add EMX 0.9b descriptions
23914 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
23915 # * rename xhpterm back to hpterm.
23916 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
23917 # * change initc in linux-c-nc to use 0..1000 range.
23918 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
23919 # * remove hpa/vpa from rxvt, which implements them incorrectly.
23920 # * add sgr0 for rxvt.
23921 # * remove bogus smacs/rmacs from EMX descriptions.
23922 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
23923 # * revised entry for att7300
23924 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
23925 # * use \0 rather than \200.
23926 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
23927 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
23928 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
23929 # * rename xterm-xf86-v39t to xterm-xf86-v40
23930 # * remove bold/underline from sun console entries since they're not
23932 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
23933 # * add beterm entry (Fred Fish)
23934 # * add irix-color/xwsh entry.
23935 # * turn ncv off for linux.
23936 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
23937 # * set ncv for FreeBSD console (treat colors with reverse specially).
23938 # * remove sgr string from qnx based on report by Xiaodan Tang
23939 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
23940 # * remove spurious commas from descriptions
23941 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
23942 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
23943 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23944 # apparently based on cp-866).
23946 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
23948 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23949 # * Replaced minitel-2 entry.
23950 # * Added MGR, ansi-nt.
23951 # * Minor corrections to xterm entries.
23952 # * Replaced EWAN telnet entry.
23953 # * Dropped the reorder script generator. It was a fossil.
23954 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23955 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23956 # the 4.4BSD Lite2 file.
23957 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
23958 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
23959 # * Updated iris-ansi; corrected vt102-w.
23960 # * Switch base xterm entry to 3.3 level.
23961 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
23963 # * Removed rmir/smir from tv92B.
23965 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
23966 # * add hds200 description (Walter Skorski)
23967 # * add beterm entry (Fred Fish)
23968 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
23969 # iris-color entries.
23970 # * add emx entries.
23971 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
23972 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
23974 # * remove sgr string from qnx based on report by Xiaodan Tang
23975 # * Added u8/u9, removed rmul/smul from sun-il.
23976 # * 4.2 tic displays \0 rather than \200.
23977 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23978 # apparently based on cp-866).
23979 # * Merged in Pavel Roskin's acsc for linux-koi8
23980 # * Corrected some erroneous \\'s to \.
23981 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
23982 # * II -> ii in pcvtXX, screen, xterm.
23983 # * Removed \n chars following ANSI escapes in sgr & friends.
23984 # * Updated Wyse entries.
23985 # * h19 corrections from Tim Pierce.
23986 # * Noted that the dm2500 has both ich and smir.
23987 # * added pccons for the Alpha under OSF/1.
23988 # * Added Sony NEWS workstation entries and cit101e-rv.
23989 # * Reverted `amiga'; to Kent Polk's version, as I'm told
23990 # the Verkuil entry messes up with Amiga Telnet.
23991 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
23992 # * Corrected attributions in 10.2.0 release notes.
23993 # * Scanned the Shuford archive for new terminfos and information.
23994 # * Removed sgr from qnx entry (Thomas Dickey).
23995 # * Added entries for ICL and Kokusai Data Systems terminals.
23996 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
23997 # * Incorporated att700 from the Boundless Technology FTP site.
23998 # * Miscellaneous contact-address and Web-page updates.
24000 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
24003 # * add nxterm and xterm-color terminfo description (request by Cristian
24004 # Gafton <gafton@redhat.com>).
24005 # * modify rxvt terminfo description to clear alternate screen before
24006 # switching back to normal screen, for compatibility with applications
24007 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
24008 # * modify linux terminfo description to reset color palette (reported
24009 # by Telford Tendys <telford@eng.uts.edu.au>).
24012 # * merge changes from current XFree86 xterm terminfo descriptions.
24015 # * Added minitel1 entries from Alexander Montaron.
24016 # * Added qnxt2 from Federico Bianchi.
24017 # * Added arm100 terminfo entries from Dave Millen.
24020 # * Added ncsa telnet entries from Francesco Potorti
24023 # * modify ncsa telnet entry to reflect color, other capabilities based on
24024 # examination of the source code - T.Dickey.
24027 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
24030 # * Added Francesco Potorti's tuned Wyse 99 entries.
24031 # * dtterm enacs correction from Alexander V. Lukyanov.
24032 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
24033 # * correct a typo in icl6404 entry.
24034 # * add xtermm and xtermc
24037 # * format most %'char' sequences to %{number}
24038 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
24039 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
24042 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
24043 # * correct initialization string in xterm-r5, add misc other features
24044 # to correspond with xterm patch #84 - TD
24047 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
24048 # * add Mathew Vernon's mach console entries
24049 # * corrections for ncsa function-keys (report by Larry Virden)
24052 # * change linux to use ncv#2, since underline does not work with color - TD
24055 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
24056 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
24057 # application modes, change kent to use the correct keypad code - TD
24060 # * add entry for Tera Term - TD
24063 # * minor improvements for teraterm entry - TD
24064 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
24065 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
24068 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
24069 # xterm and ncsa entries by removing the unneeded ones. Note that
24070 # some entries will return kend & khome versus kslt and kfnd, for
24071 # PC-style keyboards versus strict vt220 compatibility - TD
24074 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
24076 # * add 'crt' entry - TD
24077 # * correct typos in 'linux-c' entry - TD
24080 # * update entries for BSD/OS console to use klone+sgr and klone+color
24081 # (Jeffrey C Honig)
24084 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
24087 # * add linux-lat, from RedHat patches to ncurses 4.2
24090 # * add complete set of default function-key definitions for scoansi - TD.
24093 # * add cnorm, cvvis for Linux 2.2 kernels
24096 # * add kmous to xterm-r5 -TD
24097 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24098 # parent "use" clause -TD
24101 # * corrected cnorm, added el1 in 'screen' description -TD
24104 # * add ms-vt100 -TD
24107 # * corrections to beterm entry -TD
24110 # * add cygwin entry -TD
24113 # * minor corrections for beterm entry -TD
24116 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24119 # * add amiga-8bit entry
24120 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24121 # rcons-color, based on
24122 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24123 # * add alias for iris-ansi-net
24126 # * corrected scoansi entry's acsc, some function keys, add color -TD
24129 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24130 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24131 # key mapping, leaving Potorti's entries more like he named them -TD
24132 # * remove enter/exit am-mode from cygwin -TD
24135 # * correct typos in several entries (missing '[' from CSI):
24136 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24137 # strings for avt-ns -TD
24138 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24141 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24142 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24143 # * add xterm-88color and xterm-256color -TD
24146 # * add "obsolete" termcap strings -TD
24147 # * add kvt and gnome entries -TD
24150 # * correct cup string for regent100 -TD
24153 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24154 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24155 # * change OTrs capabilities to rs2 -TD
24156 # * add obsolete and extended capabilities to 'screen' -TD
24159 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24161 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24162 # and adding kcbt -TD
24165 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24166 # nonstandard resource settings -TD
24169 # * minor fixes for xterm-*, based on Debian #58530 -TD
24172 # * add several terminal types from esr's "11.0", as well as comments.
24173 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24174 # vt220-8bit, vt220-old, wy85-8bit
24177 # * add several terminal types from esr's "11.0.1" (ansi-*).
24178 # * update OTxx capabilities for changes on 2000/3/4.
24179 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24182 # * move screen's AX extension to ecma+color, modify several entries to
24183 # use that, adjusting ncv as needed -TD
24186 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24187 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24188 # in esr's version.
24191 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24192 # * correct color definition for ibm3164, make minor changes to other
24193 # IBM terminal definitions based on recent terminfo descriptions -TD
24196 # * add mgterm, from NetBSD -TD
24197 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24198 # * change cons25w to use rs2 for reset rather than rs1 -TD
24199 # * add rc/sc to aixterm based on manpage -TD
24202 # * remove ncv from xterm-16color, xterm-256color
24205 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24208 # * add Eterm (Michael Jennings)
24211 # * add amiga-vnc entry.
24214 # * correct description of Top Gun Telnet.
24215 # * add kterm-color
24218 # * add qansi* entries from QNX ftp site.
24221 # * add Matrix Orbital entries by Eric Z. Ayers).
24222 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24226 # * add S0, E0 extensions to screen's entry -TD
24229 # * several corrections based on tic's new parameter-checking code -TD
24230 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24231 # bracketing sequences that reset video attributes (\E8 would restore
24235 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24238 # * improved scoansi, based on SCO man-page, and testing console,
24239 # scoterm with tack -TD
24242 # * modify kterm to use acsc via SCS controls.
24245 # * screen 3.9.8 allows xterm mouse controls to pass-through
24248 # * remove spurious "%|" from some xterm entries.
24251 # * modify 'screen' khome/kend to match screen 3.09.08
24252 # * add examples of 'screen' customization (screen.xterm-xfree86,
24253 # screen.xterm-r6, screen.teraterm) -TD
24256 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24257 # * add "Apple_Terminal" entries -Benjamin Sittler
24258 # * remove time-delays from "Apple_Terminal" entries -TD
24259 # * make sgr entries time-delays consistent with individual caps -TD
24262 # * corrected/updated screen.xterm-xfree86
24265 # * ELKS descriptions, from Federico Bianchi
24266 # * add u6 (CSR) to Eterm (Michael Jennings).
24269 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
24270 # tic which handles names no longer than 14 characters. Add
24271 # corresponding descriptions for the Darwin PowerPC console named
24272 # "xnuppc" -Benjamin Sittler
24275 # * change kbs in mach entries to ^? (Marcus Brinkmann).
24278 # * add "putty" entry -TD
24279 # * updated "Apple_Terminal" entries -Benjamin Sittler
24282 # * add ms-vt100-color entry -TD
24283 # * add "konsole" entries -TD
24286 # * update gnome entry to Redhat 7.2 -TD
24289 # * add kf13-kf48 strings to cons25w -TD
24290 # * add pcvt25-color entry -TD
24291 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
24292 # * improve some features of scoansi entry based on SCO's version -TD
24293 # * add scoansi-new entry corresponding to OpenServer 5.0.6
24296 # * add kcbt to screen entry -TD
24299 # * add rxvt-16color, ibm+16color, mvterm entries -TD
24302 # * split out linux-basic entry, making linux-c inherit from that, and
24303 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
24304 # the history of this console type -TD
24305 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
24306 # r/g/b parameters of initc are in the range 0 to 1000 -TD
24309 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
24312 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
24313 # in the latter -TD
24316 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
24317 # * ncr260wy350pp has only 16 color pairs -TD
24318 # * add sun-type4 from NetBSD -TD
24319 # * update xterm-xfree86 to current (xterm patch #170) -TD
24320 # * add screen-bce, screen-s entries -TD
24321 # * add xterm-1002, xterm-1003 entries -TD
24324 # * update homepage for Top Gun Telnet/SSH
24327 # * reduce duplication in emx entries, added emx-base -TD
24330 # * corrected acs for screen.teraterm -TD
24331 # * add tkterm entry -TD
24334 # * cygwin changes from Charles Wilson:
24335 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
24336 # primary instead of nxterm, to match XFree86's xterm.terminfo
24337 # usage and to prevent circular links.
24338 # (rxvt): add additional codes from rxvt.org.
24339 # (rxvt-color): new alias
24340 # (rxvt-xpm): new alias
24341 # (rxvt-cygwin): like rxvt, but with special acsc codes.
24342 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
24343 # with a "native" MSWin GUI. Each takes different acsc codes,
24344 # which are both different from the "normal" rxvt's acsc.
24345 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
24346 # (cygwinDBG): ditto.
24349 # * update gnome terminal entries -TD
24352 # * add entries for djgpp 2.03 and 2.04 -TD
24355 # * add alias for vtnt -TD
24356 # * update xterm-xfree86 for XFree86 4.4 -TD
24359 # * add linux-vt (Andrey V Lukyanov)
24362 # * add screen.linux -TD
24365 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
24368 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
24369 # * add vt100+ and vt-utf8 entries -TD
24370 # * add uwin entry -TD
24373 # * add sgr strings to several common entries lacking them, e.g.,
24374 # screen, to make the entries more portable -TD
24375 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
24376 # * similar fixups for cvvis/cnorm various entries -TD
24379 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
24383 # * add xterm-xf86-v44 -TD
24384 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
24385 # on G1 being used via an ISO-2022 escape sequence (report by
24386 # Juliusz Chroboczek) -TD
24387 # * add 'hurd' entry -TD
24390 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
24392 # * align with xterm #192's use of xterm-new -TD
24393 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
24394 # * make xterm-new the default "xterm" -TD
24397 # * minor fixes for emu -TD
24399 # * add rmam/smam to linux (Trevor Van Bremen)
24400 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
24401 # * fixes for avatar0 -TD
24402 # * fixes for vp3a+ -TD
24405 # * add xterm-pc-fkeys -TD
24406 # * review/update gnome and gnome-rh90 entries (prompted by
24407 # Redhat Bugzilla #122815) -TD
24408 # * review/update konsole entries -TD
24409 # * add sgr, correct sgr0 for kterm and mlterm -TD
24410 # * correct tsl string in kterm -TD
24413 # * make ncsa-m rmacs/smacs consistent with sgr -TD
24414 # * add sgr, rc/sc and ech to syscons entries -TD
24415 # * add function-keys to decansi -TD
24416 # * add sgr to mterm-ansi -TD
24417 # * add sgr, civis, cnorm to emu -TD
24418 # * correct/simplify cup in addrinfo -TD
24419 # * corrections for gnome and konsole entries
24420 # (Redhat Bugzilla #122815) -Hans de Goede
24421 # * modify DEC entries (vt220, etc), to add sgr string, and to use
24422 # ISO-2022 strings for rmacs/smacs -TD
24425 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
24428 # * improved putty entry -Robert de Bath
24431 # * remove dch/dch1 from rxvt because they are implemented inconsistently
24432 # with the common usage of bce/ech -TD
24433 # * remove khome from vt220 (vt220's have no home key) -TD
24434 # * add rxvt+pcfkeys -TD
24437 # * modify several entries to ensure xterm mouse and cursor visibility
24438 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
24439 # Eterm, screen. (The xterm entries are left alone - old ones for
24440 # compatibility, and the new ones do not require this change) -TD
24443 # * add morphos entry -Pavel Fedin
24444 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
24445 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
24448 # * update wsvt25 entry -TD
24451 # * update pairs for xterm-88color and xterm-256color to reflect the
24452 # ncurses extended-color support -TD
24455 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
24456 # * add aixterm-16color to demonstrate 16-color capability -TD
24459 # * add media-copy to vt100 -TD
24460 # * corrected acsc string for vt52 -TD
24463 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
24465 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
24468 # * re-corrected acsc string for vt52 -TD
24471 # * corrected sun-il sgr string which referred to bold and underline -TD
24472 # * add sun-color entry -TD
24475 # * modify sgr0 in several entries to reset alternate-charset as in the
24477 # * modify sgr string of prism9 to better match the individual
24481 # * correct order of use= in rxvt-basic -TD
24484 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
24487 # * other minor fixes to cygwin based on tack -TD
24488 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
24491 # * add nsterm-16color entry -TD
24492 # * remove ncv flag from xterm-16color -TD
24493 # * remove setf/setb from xterm-256color to match xterm #209 -TD
24494 # * update mlterm entry to 2.9.2 -TD
24497 # * fixes to make nsterm-16color match report
24498 # by Christian Ebert -Alain Bench
24501 # * add xterm+256color building block -TD
24502 # * add gnome-256color, putty-256color, rxvt-256color -TD
24505 # * add hpterm-color -TD
24508 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
24509 # * add gnome-fc5 (prompted by GenToo #122566) -TD
24510 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
24511 # * improve xterm-256color by combining the ibm+16color setaf/setab
24512 # strings with SGR 48. The setf/setb strings also are cancelled here
24513 # rather than omitted so derived entries will cancel those also -Alain
24517 # * add some notes regarding copyright to terminfo.src -TD
24518 # * use rxvt+pcfkeys in Eterm -TD
24519 # * remove km and flash from gnome, Eterm and rxvt since they do not work
24520 # as one would expect (km sends ESC rather than setting the 8th bit
24522 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
24523 # * add konsole-solaris -TD
24526 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
24527 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
24528 # * modify xterm-24 to inherit from "xterm" -TD
24529 # * add xiterm entry -TD
24530 # * add putty-vt100 entry -TD
24531 # * corrected spelling of Michael A Dorman's name, prompted by
24532 # http://www.advogato.org/person/mdorman/diary.html -TD
24535 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
24536 # * update xterm+pcfkeys to match xterm #216 -TD
24539 # * make descriptions of xterm entries consistent with its terminfo -TD
24542 # * add xfce, mgt -TD
24545 # * correct acsc string in kterm -TD
24548 # * add kon entry -TD
24549 # * remove invis from linux and related entries, add klone+sgr8 for those
24550 # that implement the feature (or have not been shown to lack it) -TD
24553 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
24554 # * minor improvements to rxvt+pcfkeys -TD
24557 # * fix a few typos in if/then/else expressions -TD
24560 # * add several GNU Screen variations with 16- and 256-colors, and
24561 # status line (Alain Bench).
24564 # * add Newbury Data entries (Jean-Charles Billaud).
24567 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
24570 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
24571 # * add konsole-256color entry -TD
24574 # * add 9term entry (request by Juhapekka Tolvanen) -TD
24577 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
24578 # * add shift-control- and control-modified keys for rxvt editing
24580 # * update mlterm entry to 2.9.3 -TD
24581 # * add mlterm+pcfkeys -TD
24584 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
24585 # xterm+pcc0, etc., to make the corresponding building blocks reflect
24586 # xterm's capabilities -TD
24587 # * add mrxvt entry -TD
24588 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
24591 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
24594 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
24595 # xterm starting with xterm patch #216 -TD
24596 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
24597 # to match xterm #230 -TD
24598 # * extend xterm+pccX entries to match xterm #230 -TD
24599 # * add xterm+app, xterm+noapp, from xterm #230 -TD
24600 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
24603 # * add screen.rxvt -TD
24606 # * add screen+fkeys (prompted by Debian #478094) -TD
24609 # * add screen.mlterm -TD
24610 # * improve mlterm and mlterm+pcfkeys -TD
24613 # * add Eterm-256color, Eterm-88color -TD
24614 # * add rxvt-88color -TD
24617 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
24618 # original to teraterm2.3 -TD
24619 # * update "gnome" to 2.22.3 -TD
24620 # * update "konsole" to 1.6.6 -TD
24621 # * add "aterm" -TD
24622 # * add "linux2.6.26" -TD
24625 # * change several \E[2g (clear tab at current column) to \E[3g
24626 # (clear all tabs) to match definition for tbc capability -TD
24629 # * add eterm-color -TD
24632 # * add screen.Eterm -TD
24635 # * correct typo in pfkey of ansi.sys-old
24636 # (report by Kalle Olavi Niemitalo)
24637 # * move function- and cursor-keys from emx-base to ansi.sys, and create
24638 # a pfkey capability which handles F1-F48 -TD
24641 # * add vwmterm entry (Bryan Christ)
24644 # * change ncv and op capabilities in sun-color to match Sun's entry for
24645 # this (report by Laszlo Peter)
24646 # * improve interix smso by using reverse rather than bold (report by
24647 # Kristof Zelechovski).
24650 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
24651 # * add linux-16color (Benjamin Sittler)
24652 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
24653 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
24654 # * add ccc and initc capabilities to xterm-16color -TD
24657 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
24660 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
24663 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
24664 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
24667 # * add bterm (bogl 0.1.18) -TD
24668 # * minor fix to rxvt+pcfkeys -TD
24671 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
24674 # * add several screen-bce.XXX entries -TD
24677 # * modify screen-bce.XXX entries to exclude ech, since screen's color
24678 # model does not clear with color for that feature -TD
24681 # * rename atari and st52 to atari-old, st52-old, use newer entries from
24682 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
24685 # * add mlterm-256color entry -TD
24688 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
24689 # the alternate character set (patch by Nicholas Marriott)
24692 # * improve acsc for vt52 (Benjamin Sittler)
24693 # * modify nsterm entries for consistent sgr/sgr0 -TD
24694 # * modify xnuppc entries for consistent sgr/sgr0 -TD
24695 # * add invis to tek4115 sgr -TD
24698 # * reformat acsc strings to canonical format -TD
24701 # * add "XT" capability to entries for terminals that support both
24702 # xterm-style mouse- and title-controls, for "screen" which
24703 # special-cases TERM beginning with "xterm" or "rxvt" -TD
24706 # * fill in no-parameter forms of cursor-movement where a parameterized
24707 # form is available -TD
24708 # * fill in missing cursor controls where the form of the controls is
24710 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
24713 # * correct comparison used for setting 16-colors in linux-16color
24714 # entry (Novell #644831) -TD
24715 # * improve linux-16color entry, using "dim" for color-8 which makes it
24716 # gray rather than black like color-0 -TD
24719 # * make "vte" the principal entry defining "gnome", since GNOME terminal
24720 # is merely one of several terminals whose behavior is provided by this
24724 # * fix typo in rmso for tek4106 -Goran Weinholt
24727 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
24728 # * also suppress ncv in konsole-base -TD
24731 # * add U8 feature to denote entries for terminal emulators which do not
24732 # support VT100 SI/SO when processing UTF-8 encoding -TD
24733 # * add xterm-utf8 as a demo of the U8 feature -TD
24736 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
24739 # * update minix entry to minix 3.2 (Thomas Cort).
24742 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
24743 # * remove a backslash which continued comment, obscuring altos3
24744 # definition with OpenBSD toolset (Nicholas Marriott).
24747 # * add/use xterm+tmux chunk from xterm #271 -TD
24748 # * resync xterm-new entry from xterm #271 -TD
24749 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
24750 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
24751 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
24754 # * add kich1 to sun (Yuri Pankov)
24755 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
24758 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
24761 # * minor cleanup of X-terminal emulator section -TD
24762 # * add terminator entry -TD
24763 # * add simpleterm entry -TD
24766 # * add xterm+kbs fragment from xterm #272 -TD
24769 # * add pccon entries for OpenBSD console (Alexei Malinin)
24772 # * corrected old changelog comments -TD
24775 # * add putty-sco -TD
24778 # * add mach-gnu (Samuel Thibault)
24779 # * add mach-gnu-color, tweaks to mach-gnu -TD
24780 # * make sgr for sun-color agree with smso -TD
24781 # * make sgr for prism9 agree with other caps -TD
24782 # * make sgr for icl6404 agree with other caps -TD
24783 # * make sgr for ofcons agree with other caps -TD
24784 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
24785 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
24786 # * make sgr for avt-ns agree with other caps -TD
24789 # * make sgr for xterm-pcolor agree with other caps -TD
24790 # * make sgr for att5425 agree with other caps -TD
24791 # * make sgr for att630 agree with other caps -TD
24792 # * make sgr for linux entries agree with other caps -TD
24793 # * make sgr for tvi9065 agree with other caps -TD
24794 # * make sgr for ncr260vt200an agree with other caps -TD
24795 # * make sgr for ncr160vt100pp agree with other caps -TD
24796 # * make sgr for ncr260vt300an agree with other caps -TD
24797 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
24798 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
24801 # * correct order of use-clauses in st-256color -TD
24804 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
24807 # * document all of the user-defined capabilities in one place -TD
24808 # * add XT to some places to improve usefulness for other applications
24809 # than screen, which would like to pretend that xterm's title is
24810 # a status-line. -TD
24811 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
24812 # of ordering and overrides -TD
24815 # * add msgr to vt420, similar DEC vtXXX entries -TD
24816 # * add several missing vt420 capabilities from vt220 -TD
24817 # * factor out ansi+pp from several entries -TD
24818 # * change xterm+sl and xterm+sl-twm to include only the status-line
24819 # capabilities and not "use=xterm", making them more generally useful
24820 # as building-blocks -TD
24821 # * add dec+sl building block, as example -TD
24824 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
24825 # * add eslok flag to dec+sl -TD
24826 # * dec+sl applies to vt320 and up -TD
24827 # * drop wsl width from xterm+sl -TD
24828 # * reuse xterm+sl in putty and nsca-m -TD
24829 # * add ansi+tabs to vt520 -TD
24830 # * add ansi+enq to vt220-vt520 -TD
24833 # * remove p6 (bold) from opus3n1+ for consistency -TD
24834 # * remove acs stuff from env230 per clues in Ingres termcap -TD
24835 # * modify env230 sgr/sgr0 to match other capabilities -TD
24836 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
24837 # * make sgr for dku7202 agree with other caps -TD
24838 # * make sgr for ibmpc agree with other caps -TD
24839 # * make sgr for tek4107 agree with other caps -TD
24840 # * make sgr for ndr9500 agree with other caps -TD
24841 # * make sgr for sco-ansi agree with other caps -TD
24842 # * make sgr for d410 agree with other caps -TD
24843 # * make sgr for d210 agree with other caps -TD
24844 # * make sgr for d470c, d470c-7b agree with other caps -TD
24847 # * rewrite vt520 entry based on vt420 -TD
24848 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
24851 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
24852 # analysis by Martin Husemann).
24853 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
24854 # Onno van der Linden).
24855 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
24856 # * add kdch1, etc., to qvt108 -TD
24857 # * add dl1/il1 to some entries based on dl/il values -TD
24858 # * add dl to simpleterm -TD
24861 # * modify some older xterm entries to align with xterm source -TD
24862 # * separate "xterm-old" alias from "xterm-r6" -TD
24865 # * add E3 to xterm-basic and putty -TD
24868 # * add nsterm-256color, make this the default nsterm -TD
24869 # * remove bw from nsterm-bce, per testing with tack -TD
24872 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
24873 # (patch by Christian Persch).
24876 # * reviewed vte-2012, reverted most of the change since it was incorrect
24877 # based on testing with tack -TD
24878 # * un-cancel the initc in vte-256color, since this was implemented
24879 # starting with version 0.20 in 2009 -TD
24882 # * correct typo in sgr string for sun-color,
24883 # add bold for consistency with sgr,
24884 # change smso for consistency with sgr -TD
24885 # * correct typo in sgr string for terminator -TD
24886 # * add blink to the attributes masked by ncv in linux-16color (report
24887 # by Benjamin Sittler)
24890 # * change initialization for vt220, similar entries for consistency
24891 # with cursor-key strings (NetBSD #47674) -TD
24892 # * further improvements to linux-16color (Benjamin Sittler)
24895 # * move nsterm-related entries out of "obsolete" section to more
24896 # plausible "ansi consoles" -TD
24897 # * additional cleanup of table-of-contents by reordering -TD
24900 # * added note to clarify Terminal.app's non-emulation of the various
24901 # terminal types listed in the preferences dialog -TD
24904 # * use TS extension to describe xterm's title-escapes -TD
24905 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
24906 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
24907 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
24908 # (Debian #727119).
24909 # * simplify pfkey expression in ansi.sys -TD
24912 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
24915 # * updated notes for wsvt25 based on tack and vttest -TD
24916 # * add teken entry to show actual properties of FreeBSD's "xterm"
24920 # * add terminology entry -TD
24921 # * add mlterm3 entry, use that as "mlterm" -TD
24922 # * inherit mlterm-256color from mlterm -TD
24925 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
24928 # * cancel ccc in putty-256color and konsole-256color for consistency
24929 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
24930 # * add xterm+256setaf building block for various terminals which only
24931 # get the 256-color feature half-implemented -TD
24932 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
24936 # * add vt520ansi (Mike Gran)
24939 # * correct several entries which had termcap-style padding used in
24940 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
24941 # * correct syntax for padding in some entries: dg211, h19 -TD
24942 # * correct ti924-8 which had confused padding versus octal escapes -TD
24943 # * correct padding in sbi entry -TD
24946 # * update xterm-new to xterm patch #305 -TD
24947 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
24948 # (italic). This was a long-ago typo in screen 3.1.1 which was
24949 # overlooked until a few terminal emulators implemented the feature -TD
24952 # > fix regression in screen terminfo entries (reports by Christian
24953 # Ebert, Gabriele Balducci) -TD
24954 # + revert the change to screen; see notes for why this did not work -TD
24955 # + cancel sitm/ritm for entries which extend "screen", to work around
24956 # screen's hardcoded behavior for SGR 3 -TD
24959 # + modify sgr for screen.xterm-new to support dim capability -TD
24960 # + add dim capability to nsterm+7 -TD
24961 # + cancel dim capability for iterm -TD
24962 # + add dim, invis capabilities to vte-2012 -TD
24963 # + add sitm/ritm to konsole-base and mlterm3 -TD
24966 # + add xterm-1005 and xterm-1006 entries, with suggested extension
24967 # capability "xm" -TD
24970 # + update test-report for mrxvt -TD
24973 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
24976 # + reviewed terminology 0.6.1, add function key definitions. None of
24977 # the vt100-compatibility issues were improved -TD
24980 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
24981 # + add several key definitions to nsterm-bce to match preconfigured
24982 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
24985 # + remove unnecessary ';' from E3 capabilities -TD
24986 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
24987 # + split-out recent change to nsterm-bce as nsterm-build326, and add
24988 # nsterm-build342 to reflect changes with successive releases of OSX
24989 # (discussion with Leonardo B Schenkel)
24990 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
24994 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
24995 # + add several screen.XXX entries to support the respective variations
24996 # for 256 colors -TD
24999 # + add putty+fnkeys* building-block entries -TD
25002 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
25003 # + add vte-2014, update vte to use that -TD
25006 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
25007 # from xterm-new (report by Richard Birkett) -TD
25010 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
25011 # + fixes for st 0.5 from testing with tack -TD
25014 # + updated minitel entries to fix kel problem with emacs, and add
25015 # minitel1b-nb (Alexandre Montaron).
25016 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
25017 # + replace some dead URLs in commands with equivalents from the
25018 # Internet Archive -TD
25021 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
25022 # + add keys f12-f124 to pccon+keys (Tati Chevron).
25025 # + fix some inconsistencies in the pccon* entries -TD
25028 # + add viewdata (Alexandre Montaron).
25031 # + tidy up comments about hardcoded 256color palette (report by
25032 # Leonardo Brondani Schenkel) -TD
25033 # + add putty-noapp entry, and amend putty entry to use application mode
25034 # for better consistency with xterm (report by Leonardo Brondani
25038 # + add 'oc' capability to xterm+256color, allowing palette reset for
25042 # + modify linux2.6 entry to improve line-drawing -TD
25043 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
25046 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
25047 # reset palette using "oc" string as in linux -TD
25050 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
25051 # that could be returned -TD
25052 # + added a few capabilities fixed in recent vte -TD
25055 # + correct a typo in interix -TD
25058 # + updated minitel entries to use status line with screen(1), as well as
25059 # printing special G2 videotex chars like french accentuated glyph
25060 # using special cap XC= (patch by Alexandre Montaron).
25063 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
25064 # + correct rs2 string for vt100-nam -TD
25067 # + modify linux-16color to not mask dim, standout or reverse with the
25068 # ncv capability -TD
25069 # + add 0.1sec mandatory delay to flash capabilities using the VT100
25070 # reverse-video control -TD
25071 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
25072 # entry, to avoid conflict with the user-defined mapping. The reset
25073 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
25076 # + merge current st description (report by Harry Gindi) -TD
25079 # + modify flash capability for linux and wyse entries to put the delay
25080 # between the reverse/normal escapes rather than after -TD
25083 # + minor comment-fixes to help automate links to bug-urls -TD
25084 # + add dvtm, dvtm-256color -TD
25085 # + add settings corresponding to xterm-keys option to tmux entry to
25086 # reflect upcoming change to make that option "on" by default
25087 # (patch by Nicholas Marriott).
25088 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
25089 # + add dumb-emacs-ansi -TD
25092 # + correct a few spelling errors in comments -TD
25096 # + add vt100+4bsd building block, use that for older terminals rather
25097 # than "vt100" which is now mostly used as a building block for
25098 # terminal emulators -TD
25099 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
25100 # (report/analysis by Robert King) -TD
25103 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
25104 # + add smso for env230, to match sgr -TD
25105 # + remove p7/protect from sgr in fbterm -TD
25106 # + drop setf/setb from fbterm; setaf/setab are enough -TD
25107 # + make xterm-pcolor sgr consistent with other capabilities -TD
25108 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
25109 # (discussion with Nicholas Marriott)
25112 # + correct missing comma-separator between string capabilities in
25113 # icl6402 and m2-nam -TD
25114 # + update formatting with ncurses 6.0.20170422 -TD
25115 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
25116 # add alias ansiterm (report by Robert King).
25118 ######## SHANTIH! SHANTIH! SHANTIH!