1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2012/10/13 23:17:51 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### ANSI console types
704 # Atari ST terminals.
705 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
707 tw52|tw52-color|Toswin window manager with color,
709 colors#16, pairs#256,
710 oc=\Eb?\Ec0, op=\Eb?\Ec0,
711 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
713 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
716 tw52-m|Toswin window manager monochrome,
719 bold=\Eya, dch1=\Ea, dim=\EyB,
720 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
721 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
722 smso=\EyQ, smul=\EyH, use=at-m,
723 tt52|Atari TT medium and high resolution,
724 lines#30, use=at-color,
725 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
727 colors#16, pairs#256,
728 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
729 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
731 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
734 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
736 cols#80, it#8, lines#24,
737 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
738 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
739 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
740 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
741 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
742 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
743 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
744 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
745 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
746 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
747 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
748 tw100|toswin vt100 window mgr,
750 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
751 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
752 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
753 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
754 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
755 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
756 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
757 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
758 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
759 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
760 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
761 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
762 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
763 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
764 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
765 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
766 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
767 rmso=\E[m, rmul=\E[m,
768 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
770 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
771 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
772 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
773 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
774 # The entries for stv52 and stv52pc probably need a revision.
775 stv52|MiNT virtual console,
777 cols#80, it#8, lines#30,
778 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
779 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
780 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
781 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
782 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
783 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
784 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
785 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
786 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
787 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
788 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
789 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
790 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
791 stv52pc|MiNT virtual console with PC charset,
793 cols#80, it#8, lines#30,
794 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
795 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
796 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
797 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
798 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
799 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
800 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
801 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
802 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
803 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
804 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
805 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
806 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
812 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
815 cols#80, it#8, lines#25,
816 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
817 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
818 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
819 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
820 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
821 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
822 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
824 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
826 # MiNT VT52 emulation. 80 columns, 25 rows.
827 # MiNT is Now TOS, the operating system which comes with all Ataris now
828 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
829 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
830 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
831 st52-old|Atari ST with VT52 emulation,
834 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
835 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
836 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
837 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
838 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
839 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
840 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
841 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
842 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
847 # BeOS entry for Terminal program Seems to be almost ANSI
848 beterm|BeOS Terminal,
849 am, eo, mir, msgr, xenl, xon,
850 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
851 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
852 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
853 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
854 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
855 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
856 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
857 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
858 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
859 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
860 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
861 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
862 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
863 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
864 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
865 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
867 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
868 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
869 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
875 # This entry is good for the 1.2.13 or later version of the Linux console.
877 # ***************************************************************************
880 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
881 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
882 # * character. Here are the keymap replacement lines that will set this up: *
884 # keycode 15 = Tab Tab
885 # alt keycode 15 = Meta_Tab
886 # shift keycode 15 = F26
887 # string F26 ="\033[Z"
889 # * This has to use a key slot which is unfortunate (any unused one will *
890 # * do, F26 is the higher-numbered one). The change ought to be built *
891 # * into the kernel tables. *
893 # ***************************************************************************
895 # All linux kernels since 1.2.13 (at least) set the screen size
896 # themselves; this entry assumes that capability.
898 linux-basic|linux console,
899 am, bce, eo, mir, msgr, xenl, xon,
901 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
902 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
903 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
904 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
905 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
906 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
907 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
908 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
909 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
910 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
911 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
912 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
913 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
914 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
915 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
916 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
917 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
918 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
919 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
920 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
921 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
924 linux-m|Linux console no color,
926 setab@, setaf@, setb@, setf@, use=linux,
928 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
929 # and it matters, turn off <ccc>. The %02x escape used to implement this is
930 # not supposedly back-portable to older SV curses (although it has worked fine
931 # on Solaris for several years) and not supported in ncurses versions before
933 linux-c-nc|linux console with color-change,
935 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
936 oc=\E]R, use=linux-basic,
937 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
938 linux-c|linux console 1.3.6+ for older ncurses,
940 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
941 oc=\E]R, use=linux-basic,
943 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
944 # get a block cursor for cvvis.
945 # reported by Frank Heckenbach <frank@g-n-u.de>.
946 linux2.2|linux 2.2.x console,
947 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
948 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
950 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
951 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
952 # Using SI/SO has the drawback that it confuses screen. SCS would work.
953 # However, SCS is buggy (see comment in Debian #515609) -TD
954 # Further, this breaks longstanding workarounds for Linux console's line
955 # drawing (see Debian 665959) -TD
956 linux2.6|linux 2.6.x console,
958 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
959 sgr0=\E[m\017, smacs=^N, use=linux2.2,
961 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
962 # It is the same as xterm's erase-saved-lines feature.
963 linux3.0|linux 3.0 kernels,
964 E3=\E[3;J, use=linux2.6,
966 # This is Linux console for ncurses.
970 # Subject: linux 2.6.26 vt back_color_erase
971 # Changes to the Linux console driver broke bce model as reported in
972 # https://bugzilla.novell.com/show_bug.cgi?id=418613
974 # http://lkml.org/lkml/2008/4/26/305
975 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
976 linux2.6.26|linux console w/o bce,
979 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
980 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
981 ich@, ich1@, use=linux,
983 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
984 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
985 linux-koi8|linux with koi8 alternate character set,
986 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
987 use=linux, use=klone+koi8acs,
989 # Another entry for KOI8-r with Qing Long's acsc.
990 # (which one better complies with the standard?)
991 linux-koi8r|linux with koi8-r alternate character set,
992 use=linux, use=klone+koi8acs,
994 # Entry for the latin1 and latin2 fonts
995 linux-lat|linux with latin1 or latin2 alternate character set,
996 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
999 # This uses graphics from VT codeset instead of from cp437.
1000 # reason: cp437 (aka "straight to font") is not functional under luit.
1001 # from: Andrey V Lukyanov <land@long.yar.ru>.
1002 linux-vt|linux console using VT codes for graphics,
1003 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1004 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1007 # This is based on the Linux console (relies on the console to perform some
1008 # of the functionality), but does not recognize as many control sequences.
1009 # The program comes bundled with an old (circa 1998) copy of the Linux
1010 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1011 # \E* move cursor to home, as as \E[H
1013 # \EE move cursor to beginning of row
1014 # \E[y,xf same as \E[y,xH
1016 # Note: The status-line support is buggy (dsl does not work).
1017 kon|kon2|jfbterm|Kanji ON Linux console,
1019 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1020 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1023 # 16-color linux console entry; this works with a 256-character
1024 # console font but bright background colors turn into dim ones when
1025 # you use a 512-character console font. This uses bold for bright
1026 # foreground colors and blink for bright background colors.
1027 linux-16color|linux console with 16 colors,
1028 colors#16, ncv#54, pairs#256,
1029 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
1030 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
1033 # bterm (bogl 0.1.18)
1034 # Implementation is in bogl-term.c
1035 # Key capabilities from linux terminfo entry
1038 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1039 # bterm does not support sgr, since it only processes one parameter -TD
1040 bterm|bogl virtual terminal,
1042 colors#8, cols#80, lines#24, pairs#64,
1043 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1044 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1045 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1046 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1047 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1048 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1049 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1050 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1051 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1052 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1053 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1054 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1055 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1056 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1061 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1064 cols#80, it#8, lines#25,
1065 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1066 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1067 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1068 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1069 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1070 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1071 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1072 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1073 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1074 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1075 smso=\E[7m, smul=\E[4m,
1076 mach-bold|Mach Console with bold instead of underline,
1077 rmul=\E[0m, smul=\E[1m, use=mach,
1078 mach-color|Mach Console with ANSI color,
1080 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1081 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1083 # From: Samuel Thibault
1084 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1085 # Files: i386/i386at/kd.c
1087 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1089 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1090 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1091 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1092 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1093 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1096 mach-gnu-color|Mach Console with ANSI color,
1098 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1099 setaf=\E[3%p1%dm, use=mach-gnu,
1101 # From: Marcus Brinkmann
1102 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1104 # Comments in the original are summarized here:
1106 # hurd uses 8-bit characters (km).
1108 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1110 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1111 # have the eat_newline_glitch. It doesn't support setting or removing tab
1114 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1115 # one byte instead three.
1117 # <ich1> is not included because hurd has insert mode.
1119 # hurd doesn't use ^J for scrolling, because this could put things into the
1120 # scrollback buffer.
1122 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1123 # This is a GNU extension.
1125 # The original has commented-out ncv, but is restored here.
1127 # Reading the source, RIS resets cnorm, but not xmous.
1128 hurd|The GNU Hurd console server,
1129 am, bce, bw, eo, km, mir, msgr, xon,
1130 colors#8, it#8, ncv#18, pairs#64,
1131 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1132 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1133 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1134 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1135 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1136 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1137 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1138 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1139 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1140 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1141 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1142 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1143 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1144 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1145 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1146 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1147 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1148 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1149 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1150 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1151 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1152 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1153 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1154 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1155 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1161 # OSF/1 1.1 Snapshot 2
1162 pmcons|pmconsole|PMAX console,
1165 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
1166 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1167 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1169 # SCO console and SOS-Syscons console for 386bsd
1170 # (scoansi: had unknown capabilities
1171 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1172 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1173 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1174 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1175 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1176 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1177 # on the <smacs>=\E[12m -- esr)
1179 # klone+sgr-dumb is an error since the acsc does not match -TD
1181 # In this description based on SCO's keyboard(HW) manpage list of default
1182 # function key values:
1183 # F13-F24 are shifted F1-F12
1184 # F25-F36 are control F1-F12
1185 # F37-F48 are shift+control F1-F12
1187 # hpa/vpa work in the console, but not in scoterm:
1191 # SCO's terminfo uses
1194 # which do not work (console or scoterm).
1196 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1197 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1198 OTbs, am, bce, eo, xon,
1199 colors#8, cols#80, it#8, lines#25, pairs#64,
1200 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1201 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1202 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1203 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1204 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1205 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1206 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1207 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1208 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1209 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1210 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1211 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1212 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1213 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1214 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1215 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1216 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1217 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1218 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1219 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1220 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1221 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1222 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1223 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1224 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1225 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1226 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1228 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1229 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1230 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1231 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
1232 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1233 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1234 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1235 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1236 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1238 # make this easy to change...
1239 scoansi|SCO Extended ANSI standard crt,
1242 # This actually describes the generic SVr4 display driver for Intel boxes.
1243 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
1244 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1245 att6386|at386|386at|AT&T WGS 6386 console,
1247 cols#80, it#8, lines#25,
1248 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1249 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1250 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1251 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1252 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1253 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1254 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1255 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1256 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1257 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1258 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1259 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1260 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1261 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1262 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1263 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1265 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1266 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1267 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1268 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1269 pc6300plus|AT&T 6300 plus,
1272 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1273 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1274 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1275 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1276 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1277 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1278 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1279 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1280 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1281 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1283 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1285 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1286 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1287 # is broken. All the special key sequences are broken, making it unusable
1288 # with Emacs. The problem stems from the following:
1290 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1291 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1292 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1293 # uses resizable terminal windows, but the bundled terminal program always
1294 # uses an 80x24 window (and doesn't support seem to support a 132-column
1297 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1298 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1299 # access method".) tam includes support for real, overlapping windows,
1300 # onscreen function key labels, and bitmap graphics. But since the primary
1301 # user interface on the UNIX PC was a GUI program (ua, for "user
1302 # assistant",) and remote administration was considered important for the
1303 # machine, tam also supported VT100-compatible terminals attached to the
1304 # serial port or used across the StarLan network. To simulate the extra keys
1305 # not present on a VT100, users could press ESC and a two-letter sequence,
1306 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1307 # however, were not the same as those sent by the actual Undo key. The
1308 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1309 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1310 # have the full documentation and several programs which use tam. It also
1311 # used an extended terminfo format to describe key sequences, special
1312 # highlighting modes, etc.)
1314 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1315 # there are two sequences for every key-modifier combination (local keyboard
1316 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1317 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1318 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1319 # seem to have been built from the manual describing the VT100 sequences.
1320 # This means it doesn't work for a real live UNIX PC.
1322 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1323 # character set". Rather than the VT100 graphics you might expect, it allows
1324 # up to 8 custom fonts to be loaded at any given time. This means that
1325 # programs expecting VT100 graphics will usually be disappointed. For this
1326 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1327 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1328 # manpage), should you wish to do so:
1330 # SGR10 - Select font 0 - ESC [ 10 m or SO
1331 # SGR11 - Select font 1 - ESC [ 11 m or SI
1332 # SGR12 - Select font 2 - ESC [ 12 m
1334 # SGR17 - Select font 7 - ESC [ 17 m
1336 # Graphics for line drawing are not reliably found at *any* character
1337 # location because the UNIX PC has dynamically reloadable fonts. I use font
1338 # 0 for regular text and font 1 for italics, but this is by no means
1339 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1341 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1342 # distributed terminfo.
1344 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1345 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1346 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1347 # attached by serial cable. In Emacs, even the Undo key works, and many
1348 # applications can now use the F1-F8 keys.
1351 # Terminfo entry for the AT&T Unix PC 7300
1352 # from escape(7) in Unix PC 7300 Manual.
1353 # Somewhat similar to a vt100-am (but different enough
1354 # to redo this from scratch.)
1356 # /***************************************************************
1358 # * FONT LOADING PROGRAM FOR THE UNIX PC
1360 # * This routine loads a font defined in the file ALTFONT
1361 # * into font memory slot #1. Once the font has been loaded,
1362 # * it can be used as an alternative character set.
1364 # * The call to ioctl with the argument WIOCLFONT is the key
1365 # * to this routine. For more information, see window(7) in
1366 # * the PC 7300 documentation.
1367 # ***************************************************************/
1368 # #include <string.h> /* needed for strcpy call */
1369 # #include <sys/window.h> /* needed for ioctl call */
1370 # #define FNSIZE 60 /* font name size */
1371 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1373 # * The file /usr/lib/wfont/special.8.ft comes with the
1374 # * standard PC software. It defines a graphics character set
1375 # * similar to that of the Teletype 5425 terminal. To view
1376 # * this or other fonts in /usr/lib/wfont, use the command
1377 # * cfont <filename>. For further information on fonts see
1378 # * cfont(1) in the PC 7300 documentation.
1381 # struct altfdata /* structure for alt font data */
1383 # short altf_slot; /* memory slot number */
1384 # char altf_name[FNSIZE]; /* font name (file name) */
1388 # int wd; /* window in which altfont will be */
1389 # struct altfdata altf;
1391 # strcpy(altf.altf_name,ALTFONT);
1392 # for (wd =1; wd < 12; wd++) {
1393 # ioctl(wd, WIOCLFONT,&altf);
1397 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1398 # they're confirmed by the man page for the System V display---esr)
1400 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1402 cols#80, it#8, lines#24,
1403 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1404 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1405 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1406 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1407 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1408 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1409 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1410 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1411 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1412 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1413 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1414 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1415 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1416 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1417 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1418 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1419 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1420 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1421 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1422 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1423 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1424 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1427 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1428 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1429 # for the application keypad mode. We have added iris-ansi-ap rather than
1430 # change the original to keypad mode.
1432 # (iris-ansi: added rmam/smam based on init string -- esr)
1434 # This entry, and those derived from it, is used in xwsh (also known as
1435 # winterm). Some capabilities that do not fit into the terminfo model
1436 # include the shift- and control-functionkeys:
1438 # F1-F12 generate different codes when shift or control modifiers are used.
1442 # control-F1 \E[025q
1444 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1445 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1447 # The cursor keys also have different codes:
1448 # control-up \E[162q
1449 # control-down \E[165q
1450 # control-left \E[159q
1451 # control-right \E[168q
1454 # shift-down \E[164q
1455 # shift-left \E[158q
1456 # shift-right \E[167q
1458 # control-tab \[072q
1460 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1462 cols#80, it#8, lines#40,
1463 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1464 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1465 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1466 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1467 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1468 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1469 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1470 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1471 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1472 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1473 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1474 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1475 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1476 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1477 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1478 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1479 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1480 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1481 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1483 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1484 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1485 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1487 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1488 # (T.Dickey 98/1/24)
1489 iris-color|xwsh|IRIX ANSI with color,
1491 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1492 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1493 rmul=\E[24m, rs1=\Ec,
1494 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1495 sitm=\E[3m, use=vt100+enq, use=klone+color,
1498 # The following is a version of the ibm-pc entry distributed with PC/IX,
1499 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1500 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1501 # (the former is untrue, and the latter failed under UCB/man); standout and
1502 # underline modes have been added. Note: this entry describes the "native"
1503 # capabilities of the PC monochrome display, without ANY emulation; most
1504 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1508 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1509 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1510 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1513 # (ibmpcx: this entry used to be known as ibmx.
1514 # It formerly included the following extension capabilities:
1515 # :GC=b:GL=v:GR=t:RT=^J:\
1516 # :GH=\E[196g:GV=\E[179g:\
1517 # :GU=\E[193g:GD=\E[194g:\
1518 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1519 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1520 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1521 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1522 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1523 # what was there before. -- esr)
1524 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1527 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1528 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1529 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1530 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1531 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1532 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1538 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1539 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1540 # right corner without triggering a scroll. The ncurses terminfo library can
1541 # handle this case with the <ich1> capability, and prefers <am> for better
1542 # optimization. Bug: The <op> capability resets attributes.
1543 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1544 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1545 qnx|qnx4|qnx console,
1546 daisy, km, mir, msgr, xhpa, xt,
1547 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1548 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1549 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1550 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1551 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1552 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1553 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1554 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1555 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1556 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1557 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1558 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1559 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1560 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1561 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1562 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1563 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1564 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1565 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1566 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1567 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1568 kext=\377\270, kf1=\377\201, kf10=\377\212,
1569 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1570 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1571 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1572 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1573 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1574 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1575 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1576 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1577 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1578 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1579 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1580 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1581 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1582 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1583 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1584 khlp=\377\350, khome=\377\240, khts=\377\342,
1585 kich1=\377\253, kil1=\377\273, kind=\377\261,
1586 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1587 knp=\377\252, knxt=\377\312, kopn=\377\357,
1588 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1589 kprv=\377\302, krdo=\377\336, kref=\377\354,
1590 kres=\377\360, krfr=\377\347, kri=\377\271,
1591 krmir=\377\313, krpl=\377\362, krst=\377\352,
1592 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1593 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1594 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1595 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1596 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1600 qnxt|qnxt4|QNX4 terminal,
1603 qnxm|QNX4 with mouse events,
1605 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1606 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1607 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1608 smicm=\E/>2h, use=qnx4,
1613 # Monochrome QNX4 terminal or console. Setting this terminal type will
1614 # allow an application running on a color console to behave as if it
1615 # were a monochrome terminal. Output will be through stdout instead of
1616 # console writes because the term routines will recognize that the
1617 # terminal name starts with 'qnxt'.
1619 qnxtmono|Monochrome QNX4 terminal or console,
1623 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1624 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1625 # (TD: derive from original qnx4 entry)
1626 qnxt2|qnx 2.15 serial terminal,
1628 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1629 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1631 # QNX ANSI terminal definition
1634 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1635 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1636 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1637 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1638 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1639 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1640 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1641 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1642 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1643 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1644 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1645 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1646 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1647 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1648 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1649 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1650 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1651 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1652 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1653 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1654 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1655 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1656 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1657 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1658 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1659 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1660 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1661 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1662 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1663 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1664 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1665 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1666 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1667 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1668 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1669 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1670 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1671 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1672 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1673 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1674 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1675 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1676 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1677 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1678 smul=\E[4m, tbc=\E[3g,
1679 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1681 qansi|QNX ansi with console writes,
1682 daisy, xhpa, use=qansi-g,
1684 qansi-t|QNX ansi without console writes,
1687 qansi-m|QNX ansi with mouse,
1689 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1690 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1691 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1692 smicm=\E[>2h, use=qansi,
1694 qansi-w|QNX ansi for windows,
1697 #### OpenBSD consoles
1699 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1701 # The following terminal descriptions for the AMD/Intel PC console
1702 # were prepared based on information contained in the OpenBSD-4.9
1703 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1705 # Added bce based on testing with tack -TD
1706 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1707 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1709 pccon+keys|OpenBSD PC keyboard keys,
1710 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1711 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
1712 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1713 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1714 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1716 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1717 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
1718 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
1719 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1720 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1721 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1722 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
1723 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1724 pccon+colors|ANSI colors for OpenBSD PC console,
1727 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1728 pccon+base|base capabilities for OpenBSD PC console,
1729 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1730 cols#80, it#8, lines#24,
1731 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
1732 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
1733 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1734 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1735 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1736 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
1737 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1738 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1739 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
1740 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1741 use=pccon0-m, use=pccon+colors,
1742 pccon-m|OpenBSD PC console without colors,
1743 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1744 pccon|OpenBSD PC console,
1745 use=pccon-m, use=pccon+colors,
1747 #### NetBSD consoles
1749 # pcvt termcap database entries (corresponding to release 3.31)
1750 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1752 # (For the terminfo master file, I translated these into terminfo syntax.
1753 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1754 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1755 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1757 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1758 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1759 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1760 pcvtXX|pcvt vt200 emulator (DEC VT220),
1761 am, km, mir, msgr, xenl,
1763 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1764 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1765 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1766 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1767 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1768 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1769 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1770 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1771 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1772 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1773 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1774 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1775 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1776 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1777 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1778 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1779 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1780 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1781 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1782 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1784 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1785 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1786 # 50 lines entries; 80 columns
1787 pcvt25|dec vt220 emulation with 25 lines,
1789 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1790 pcvt28|dec vt220 emulation with 28 lines,
1792 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1793 pcvt35|dec vt220 emulation with 35 lines,
1795 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1796 pcvt40|dec vt220 emulation with 40 lines,
1798 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1799 pcvt43|dec vt220 emulation with 43 lines,
1801 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1802 pcvt50|dec vt220 emulation with 50 lines,
1804 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1806 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1807 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1808 # 50 lines entries; 132 columns
1809 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1811 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1812 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1814 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1815 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1817 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1818 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1820 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1821 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1823 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1824 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1826 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1828 # OpenBSD implements a color variation
1829 pcvt25-color|dec vt220 emulation with 25 lines and color,
1831 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1832 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1833 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1834 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1835 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1838 # Terminfo entries to enable the use of the ncurses library in colour on a
1839 # NetBSD-arm32 console (only tested on a RiscPC).
1840 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1841 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1842 # typo in invis - TD
1843 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1844 am, bce, msgr, xenl, xon,
1845 cols#80, it#8, lines#30,
1846 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1847 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1848 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1849 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1850 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1851 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1852 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1853 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1854 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1855 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1856 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1857 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1858 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1859 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1860 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1862 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1863 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1864 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1867 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1868 cols#132, lines#50, use=arm100,
1870 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1871 # manufactured by Sharp for the Japenese market.
1872 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1873 x68k|x68k-ite|NetBSD/x68k ITE,
1875 kclr=\E[9~, khlp=\E[28~, use=vt220,
1878 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1880 # (still unfinished, but good enough so far.)
1881 ofcons|DNARD OpenFirmware console,
1884 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
1885 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1886 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1887 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1888 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1889 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1890 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1891 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1892 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1893 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1894 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1895 rmso=\2330m, rmul=\2330m,
1896 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
1897 sgr0=\2330m, smso=\2337m, smul=\2334m,
1899 # NetBSD "wscons" emulator in vt220 mode.
1900 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1901 # The emulator renders underlined text in red. Colors are otherwise usable.
1903 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1904 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1905 # vt220 screens in vttest do not work with this emulator. For instance, it
1906 # identifies itself (primary DA response) as a vt220 with selective erase. But
1907 # the selective erase feature does not work. The secondary response is copied
1908 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1909 # the level of detail in a termcap, it is a passable emulator, since ECH does
1910 # work. Don't use it on a VMS system -TD
1911 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1913 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1914 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1915 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1916 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1917 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1918 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1919 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1921 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1924 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1926 rcons|BSD rasterconsole,
1928 # Color version of above. Color currently only provided by NetBSD.
1929 rcons-color|BSD rasterconsole with ANSI color,
1932 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1934 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1935 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1936 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1937 # -- compare with cons25w
1939 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1940 colors#8, cols#80, it#8, lines#18, pairs#64,
1941 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1942 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1943 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1944 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1945 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1946 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1947 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1948 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1949 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1950 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1951 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1952 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1953 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1954 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1955 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1956 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1958 #### FreeBSD console entries
1960 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1961 # Andrey Chernov maintains the FreeBSD termcap distributions.
1963 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1964 # or comment out the :cb: capability in the console entry.
1966 # Alexander Lukyanov reports:
1967 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1968 # Now el1 clears not only to the line beginning, but also a large chunk
1969 # of previous line. But there is another bug - ech does not work at all.
1973 # common entry without semigraphics
1974 # Bug: The <op> capability resets attributes.
1975 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1976 # instance el1 does if the cursor is moved to the right margin first. Removed
1977 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1979 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1980 # Note that this disables standout with color.
1982 # The emulator sends difference strings based on shift- and control-keys,
1984 # F13-F24 are shifted F1-F12
1985 # F25-F36 are control F1-F12
1986 # F37-F48 are shift+control F1-F12
1987 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1988 am, bce, bw, eo, msgr, npc,
1989 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1990 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1991 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1992 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1993 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1994 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1995 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1996 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1997 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1998 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1999 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2000 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2001 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2002 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2003 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2004 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2005 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2006 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2007 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2008 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2009 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2010 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2011 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2012 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2013 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2014 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2015 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2016 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2018 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2019 kbs=\177, kdch1=\E[3~, use=cons25,
2020 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2022 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2023 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2024 smul=\E[4m, use=cons25,
2025 cons30|ansi80x30|freebsd console (30-line ansi mode),
2026 lines#30, use=cons25,
2027 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2028 lines#30, use=cons25-m,
2029 cons43|ansi80x43|freebsd console (43-line ansi mode),
2030 lines#43, use=cons25,
2031 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2032 lines#43, use=cons25-m,
2033 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2034 lines#50, use=cons25,
2035 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2036 lines#50, use=cons25-m,
2037 cons60|ansi80x60|freebsd console (60-line ansi mode),
2038 lines#60, use=cons25,
2039 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2040 lines#60, use=cons25-m,
2041 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2042 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2044 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2046 op@, rmul=\E[m, setab@, setaf@,
2047 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2048 smul=\E[4m, use=cons25r,
2049 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2050 lines#50, use=cons25r,
2051 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2052 lines#50, use=cons25r-m,
2053 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2054 lines#60, use=cons25r,
2055 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2056 lines#60, use=cons25r-m,
2057 # ISO 8859-1 FreeBSD console
2058 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2059 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2061 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2063 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2064 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2065 smul=\E[4m, use=cons25l1,
2066 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2067 lines#50, use=cons25l1,
2068 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2069 lines#50, use=cons25l1-m,
2070 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2071 lines#60, use=cons25l1,
2072 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2073 lines#60, use=cons25l1-m,
2075 #### 386BSD and BSD/OS Consoles
2078 # This was the original 386BSD console entry (I think).
2079 # Some places it's named oldpc3|oldibmpc3.
2080 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2081 origpc3|origibmpc3|IBM PC 386BSD Console,
2082 OTbs, am, bw, eo, xon,
2084 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2085 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2086 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2087 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2088 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2089 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2090 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2092 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2093 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2096 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2097 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2098 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2099 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2101 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2102 # Note, the emulator supports many of the additional console features
2103 # listed in the iBCS2 (e.g. character-set selection) though not all
2104 # are described here. This entry really ought to be upgraded.
2105 # Also note, the console will also work with fewer lines after doing
2106 # "stty rows NN", e.g. to use 24 lines.
2107 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2108 # Bug: The <op> capability resets attributes.
2109 bsdos-pc|IBM PC BSD/OS Console,
2110 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2111 use=bsdos-pc-nobold,
2113 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2114 use=klone+color, use=bsdos-pc-m,
2116 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2117 OTbs, am, eo, km, xon,
2118 cols#80, it#8, lines#25,
2119 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2120 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2121 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2122 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2123 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2124 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2125 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2126 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2129 # Old names for BSD/OS PC console used in releases before 4.1.
2130 pc3|BSD/OS on the PC Console,
2131 use=bsdos-pc-nobold,
2132 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2135 # BSD/OS on the SPARC
2136 bsdos-sparc|Sun SPARC BSD/OS Console,
2139 # BSD/OS on the PowerPC
2140 bsdos-ppc|PowerPC BSD/OS Console,
2144 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2146 # Actually (TD pointed this out at the time the acsc string was added):
2147 # vt52 shouldn't define full acsc since most of the cells don't match.
2148 # see vt100 manual page A-31. This is the list that does match:
2157 # The line-drawing happens to work in several terminal emulators, but should
2158 # not be used as a guide to the capabilities of the vt52. Note in particular
2159 # that vt52 does not support line-drawing characters (the scan-X values refer
2160 # to a crude plotting feature) -TD
2163 cols#80, it#8, lines#24,
2164 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2165 cub1=\ED, cud1=\EB, cuf1=\EC,
2166 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2167 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2168 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2170 #### DEC VT100 and compatibles
2172 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2173 # and micro consoles can be found in the `obsolete' section. More details on
2174 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2175 # found near the end of this file.
2177 # Except where noted, these entries are DEC's official terminfos.
2178 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2179 # Engineering for more information. Updated terminfos and termcaps
2180 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2182 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2183 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2184 # its name to Boundless Technologies; see http://www.boundless.com.
2187 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2188 # certainly includes what DEC called the `Level 1 editing extension' codes;
2189 # only the very oldest VT100s lacked these and there probably aren't any of
2190 # those left alive. To capture these, use one of the VT102 entries.
2192 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2193 # since the cursor is left in a different position while in the
2194 # weird state (concept at beginning of next line, vt100 at end
2195 # of this line) so all versions of vi before 3.7 don't handle
2196 # <xenl> right on vt100. The correct way to handle <xenl> is when
2197 # you output the char in column 80, immediately output CR LF
2198 # and then assume you are in column 1 of the next line. If <xenl>
2199 # is on, am should be on too.
2201 # I assume you have smooth scroll off or are at a slow enough baud
2202 # rate that it doesn't matter (1200? or less). Also this assumes
2203 # that you set auto-nl to "on", if you set it off use vt100-nam
2206 # The padding requirements listed here are guesses. It is strongly
2207 # recommended that xon/xoff be enabled, as this is assumed here.
2209 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2210 # tab settings are in non-volatile memory and don't need to be
2211 # reset upon login. Also setting the number of columns glitches
2212 # the screen annoyingly. You can type "reset" to get them set.
2214 # The VT100 series terminals have cursor ("arrows") keys which can operate
2215 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2216 # is the reset state, and is assumed to be the normal state. Application
2217 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2218 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2219 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2220 # was provided primarily as an aid to the porting of VT52 applications. It is
2221 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2222 # applications such as vi will always transmit the <smkx> string. Therefore,
2223 # the definitions for the cursor keys are made to match what the terminal
2224 # transmits after the <smkx> string is transmitted. If the <smkx> string
2225 # is a null string or is not defined, then cursor keys are assumed to be in
2226 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2227 # else the application may fail. It is also expected that applications will
2228 # always transmit the <rmkx> string to the terminal before they exit.
2230 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2231 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2232 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2233 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2234 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2235 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2236 # Enter key transmits the same as the Return key (Note: the Return key
2237 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2238 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2239 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2240 # is normally in Numeric Mode. If an application requires that the keypad be
2241 # in Application Mode then it is expected that the user, or the application,
2242 # will set the TERM environment variable to point to a terminfo entry which has
2243 # defined the <smkx> string to include the codes that switch the keypad into
2244 # Application Mode, and the terminfo entry will also define function key
2245 # fields to match the Application Mode control codes. If the <smkx> string
2246 # is a null string or is not defined, then the keypad is assumed to be in
2247 # Numeric Mode. If the <smkx> string switches the keypad into Application
2248 # Mode, it is expected that the <rmkx> string will contain the control codes
2249 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2250 # applications which transmit the <smkx> string will also always transmit the
2251 # <rmkx> string to the terminal before they exit.
2253 # Here's a diagram of the VT100 keypad keys with their bindings.
2254 # The top line is the name of the key (some DEC keyboards have the keys
2255 # labelled somewhat differently, like GOLD instead of PF1, but this is
2256 # the most "official" name). The second line is the escape sequence it
2257 # generates in Application Keypad mode (where "$" means the ESC
2258 # character). The third line contains two items, first the mapping of
2259 # the key in terminfo, and then in termcap.
2260 # _______________________________________
2261 # | PF1 | PF2 | PF3 | PF4 |
2262 # | $OP | $OQ | $OR | $OS |
2263 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2265 # | $Ow | $Ox | $Oy | $Om |
2266 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2268 # | $Ot | $Ou | $Ov | $Ol |
2269 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2271 # | $Oq | $Or | $Os | enter |
2272 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2275 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2277 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2278 # terminfo guidelines. That is a compromise used to assign the remaining
2279 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2281 vt100+keypad|dec vt100 numeric keypad no fkeys,
2282 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2283 vt100+pfkeys|dec vt100 numeric keypad,
2284 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2286 vt100+fnkeys|dec vt100 numeric keypad,
2287 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2288 kf9=\EOw, use=vt100+pfkeys,
2290 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2291 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2292 # use the 5-key arrangement to model the arrow keys as suggested in the
2293 # terminfo guidelines:
2294 # _______________________________________
2295 # | PF1 | PF2 | PF3 | PF4 |
2296 # | $OP | $OQ | $OR | $OS |
2297 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2299 # | $Ow | $Ox | $Oy | $Om |
2300 # |_ka1__K1_|_________|_ka3__K3_|_________|
2302 # | $Ot | $Ou | $Ov | $Ol |
2303 # |_________|_kb2__K2_|_________|_________|
2305 # | $Oq | $Or | $Os | enter |
2306 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2309 # |___________________|_________|_kent_@8_|
2311 vt220+keypad|dec vt220 numeric keypad,
2312 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2313 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2316 vt100+enq|ncurses extension for vt100-style ENQ,
2317 u8=\E[?1;2c, use=ansi+enq,
2318 vt102+enq|ncurses extension for vt102-style ENQ,
2319 u8=\E[?6c, use=ansi+enq,
2321 # And here, for those of you with orphaned VT100s lacking documentation, is
2322 # a description of the soft switches invoked when you do `Set Up'.
2324 # Scroll 0-Jump Shifted 3 0-#
2325 # | 1-Smooth | 1-British pound sign
2326 # | Autorepeat 0-Off | Wrap Around 0-Off
2328 # | | Screen 0-Dark Bkg | | New Line 0-Off
2329 # | | | 1-Light Bkg | | | 1-On
2330 # | | | Cursor 0-Underline | | | Interlace 0-Off
2331 # | | | | 1-Block | | | | 1-On
2333 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2335 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2336 # | | | 1-On | | | 1-50 Hz
2337 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2338 # | | 1-ANSI | | 1-8 Bits
2339 # | Keyclick 0-Off | Parity 0-Off
2341 # Margin Bell 0-Off Parity Sense 0-Odd
2344 # The following SET-UP modes are assumed for normal operation:
2345 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2346 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2347 # Other SET-UP modes may be set for operator convenience or communication
2348 # requirements; I recommend
2349 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2350 # Unless you have a graphics add-on such as Digital Engineering's VT640
2351 # (and even then, whenever it can be arranged!) you should set
2354 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2355 vt100|vt100-am|dec vt100 (w/advanced video),
2356 OTbs, am, mc5i, msgr, xenl, xon,
2357 cols#80, it#8, lines#24, vt#3,
2358 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2359 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2360 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2361 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2362 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2363 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2364 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2365 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2366 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2367 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2368 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2369 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2370 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2371 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2372 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2373 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2375 vt100nam|vt100-nam|vt100 no automargins,
2376 am@, xenl@, use=vt100-am,
2377 vt100-vb|dec vt100 (w/advanced video) & no beep,
2378 bel@, flash=\E[?5h\E[?5l, use=vt100,
2380 # Ordinary vt100 in 132 column ("wide") mode.
2381 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2383 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2384 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2385 cols#132, lines#14, vt@,
2386 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2388 # vt100 with no advanced video.
2389 vt100-nav|vt100 without advanced video option,
2391 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2393 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2394 cols#132, lines#14, use=vt100-nav,
2396 # vt100 with one of the 24 lines used as a status line.
2397 # We put the status line on the top.
2398 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2401 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2402 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2403 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2404 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2406 # Status line at bottom.
2407 # Clearing the screen will clobber status line.
2408 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2411 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2412 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2414 # Most of the `vt100' emulators out there actually emulate a vt102
2415 # This entry (or vt102-nsgr) is probably the right thing to use for
2418 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2420 vt102-w|dec vt102 in wide mode,
2422 rs3=\E[?3h, use=vt102,
2424 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2425 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2426 # string in the canonical vt100 entry above leaves the screen littered
2427 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2428 # after highlight turnoffs. This entry should fix that, and even leave
2429 # ACS support working, at the cost of making multiple-highlight changes
2430 # slightly more expensive.
2431 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2432 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2433 sgr@, sgr0=\E[m, use=vt102,
2435 # VT125 Graphics CRT. Clear screen also erases graphics
2436 # Some vt125's came configured with vt102 support.
2437 vt125|vt125 graphics terminal,
2439 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2441 # This isn't a DEC entry, it came from University of Wisconsin.
2442 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2445 cols#80, it#8, lines#24, vt#3,
2446 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2447 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2448 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2449 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2450 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2451 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2452 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2453 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2454 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2456 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2457 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2458 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2460 # vt132 - like vt100 but slower and has ins/del line and such.
2461 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2462 # manual and from the ANSI standard, this describes the actual
2463 # terminal. I've never actually used a vt132 myself, so this
2468 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2469 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2471 # This vt220 description maps F5--F9 to the second block of function keys
2472 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2473 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2474 # PF1--PF4 are used as F1--F4.
2477 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2478 OTbs, OTpt, am, mir, msgr, xenl, xon,
2479 cols#80, lines#24, vt#3,
2481 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2482 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2483 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2484 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2485 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2486 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2487 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2488 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2489 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2490 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2491 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2492 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2493 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2494 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2495 rmso=\E[27m, rmul=\E[24m,
2496 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2497 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2498 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2499 smso=\E[7m, smul=\E[4m,
2501 # A much better description of the VT200/220; used to be vt220-8
2502 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2503 # designation to accommodate bug in pcvt -TD
2505 # Here's a picture of the VT220 editing keypad:
2506 # +--------+--------+--------+
2507 # | Find | Insert | Remove |
2508 # +--------+--------+--------+
2509 # | Select | Prev | Next |
2510 # +--------+--------+--------+
2511 vt220|vt200|dec vt220,
2512 OTbs, am, mir, msgr, xenl, xon,
2513 cols#80, it#8, lines#24, vt#3,
2514 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2515 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2516 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2517 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2518 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2519 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2520 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2521 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2522 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2523 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2524 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2525 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2526 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2527 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2528 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2529 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2530 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2531 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2532 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2533 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2535 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2536 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2537 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2539 vt220-w|vt200-w|DEC vt220 in wide mode,
2541 rs3=\E[?3h, use=vt220,
2542 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2543 OTbs, am, mc5i, mir, msgr, xenl, xon,
2544 cols#80, it#8, lines#24, vt#3,
2545 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2546 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2547 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2548 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2549 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2550 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2551 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2552 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2553 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2554 il=\233%p1%dL, il1=\233L, ind=\ED,
2555 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2556 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2557 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2558 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2559 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2560 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2561 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2562 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2563 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2564 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2565 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2566 rmul=\23324m, rs1=\233?3l, sc=\E7,
2567 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2568 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2569 smso=\2337m, smul=\2334m, tbc=\2333g,
2572 # This vt220 description regards F6--F10 as the second block of function keys
2573 # at the top of the keyboard. This mapping follows the description given
2574 # in the VT220 Programmer Reference Manual and agrees with the labeling
2575 # on some terminals that emulate the vt220. There is no support for an F5.
2576 # See vt220 for an alternate mapping.
2578 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2579 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2580 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2581 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2582 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2584 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2586 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2588 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2589 # (not an official DEC entry!)
2590 # The problem with real vt220 terminals is they don't send escapes when in
2591 # in vt220 mode. This can be gotten around two ways. 1> don't send
2592 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2593 # features of vt100 advanced video which it then has.
2595 # This entry takes the view of putting a vt220 into vt100 mode so
2596 # you can use the escape key in emacs and everything else which needs it.
2598 # You probably don't want to use this on a VMS machine since VMS will think
2599 # it has a vt220 and will get fouled up coming out of emacs
2601 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2602 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2604 vt200-js|vt220-js|dec vt200 series with jump scroll,
2607 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2608 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2609 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2610 ht=^I, il1=\E[L, ind=\ED,
2611 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2612 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2613 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2614 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2615 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2616 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2617 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2619 # This was DEC's vt320. Use the purpose-built one below instead
2620 #vt320|DEC VT320 in vt100 emulation mode,
2623 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2625 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2627 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2629 # These entries are not DEC's official ones, they were purpose-built for the
2630 # VT320. Here are the designer's notes:
2631 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2632 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2633 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2634 # Things that use <knxt> usually use tab anyways... and things that don't use
2635 # tab usually use <knxt> instead...
2636 # kprv is same as tab - Backtab is useless...
2637 # I left out <sgr> because of its RIDICULOUS complexity,
2638 # and the resulting fact that it causes the termcap translation of the entry
2639 # to SMASH the 1k-barrier...
2640 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2641 # (vt320: uncommented <fsl> --esr)
2642 vt320|vt300|dec vt320 7 bit terminal,
2643 am, hs, mir, msgr, xenl,
2644 cols#80, lines#24, wsl#80,
2645 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2646 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2647 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2648 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2649 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2650 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2651 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2652 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2653 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2654 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2655 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2656 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2657 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2658 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2659 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2660 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2661 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2662 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2663 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2665 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2667 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2668 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2669 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2670 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2671 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2673 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2674 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2676 # We have to init 132-col mode, not 80-col mode.
2677 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2679 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2680 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2682 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2684 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2685 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2688 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2689 # which are pretty much a superset of the VT320. They have the
2690 # host writable status line, yet another different DRCS matrix size,
2691 # and such, but they add the DEC Technical character set, Multiple text
2692 # pages, selectable length pages, and the like. The difference between
2693 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2694 # monitor, the former has 4 planes and a color monitor. These terminals
2695 # support VT131 and ANSI block mode, but as with much of these things,
2696 # termcap/terminfo doesn't deal with these features.
2698 # Note that this entry is are set up in what was the standard way for GNU
2699 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2700 # keys were switched into application mode at the same time the numeric pad
2701 # is switched into application mode. This changes the definitions of the
2702 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2703 # your termcap or terminfo entry,
2705 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2706 # (vt340: string capability "sb=\E[M" corrected to "sr";
2707 # also, added <rmam>/<smam> based on the init string -- esr)
2708 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2709 am, eslok, hs, mir, msgr, xenl, xon,
2710 cols#80, it#8, lines#24, vt#3,
2711 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2712 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2713 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2714 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2715 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2716 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2717 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2718 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2719 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2721 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2722 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2723 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2724 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2725 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2726 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2727 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2728 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2729 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2730 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2731 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2732 tsl=\E[2$~\E[1$}\E[1;%dH,
2734 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2735 # (originally written with vt420 as its primary name, and usable for it).
2737 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2738 # text pages and long text pages with selectable length of the vt340, along
2739 # with left and right margins, rectangular area text copy, fill, and erase
2740 # operations, selected region character attribute change operations,
2741 # page memory and rectangle checksums, insert/delete column, reception
2742 # macros, and other features too numerous to remember right now. TERMCAP
2743 # can only take advantage of a few of these added features.
2745 # Note that this entry is are set up in what was the standard way for GNU
2746 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2747 # keys were switched into application mode at the same time the numeric pad
2748 # is switched into application mode. This changes the definitions of the
2749 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2750 # your termcap entry,
2752 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2753 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2754 # also, added <rmam>/<smam> based on the init string -- esr)
2755 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2756 am, eslok, hs, mir, msgr, xenl, xon,
2757 cols#80, it#8, lines#24, vt#3,
2758 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2759 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2760 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2761 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2762 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2763 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2764 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2765 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2766 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2767 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2768 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2769 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2770 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2771 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2772 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2773 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2774 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2775 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2776 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2777 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2778 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2779 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2780 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2782 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2783 # a missing <sc> -- esr)
2784 # add msgr and other capabilities from vt220 -TD
2786 am, mir, msgr, xenl, xon,
2787 cols#80, it#8, lines#24, vt#3,
2788 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2789 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2790 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2791 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2792 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2793 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2794 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2795 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2796 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2797 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2798 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2799 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2800 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2801 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2802 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2803 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2804 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2805 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2806 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2807 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2808 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2809 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2810 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2811 use=ansi+pp, use=dec+sl, use=ansi+enq,
2813 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2814 # takes two parameters, the key and the string. Translating the key is
2815 # straightforward (keys 1-5 are not defined on real terminals, though some
2816 # emulators define these):
2818 # if (key < 16) then value = key;
2819 # else if (key < 21) then value = key + 1;
2820 # else if (key < 25) then value = key + 2;
2821 # else if (key < 27) then value = key + 3;
2822 # else if (key < 30) then value = key + 4;
2823 # else value = key + 5;
2825 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2826 # There's no provision in terminfo for emitting a string in this format, so the
2827 # application has to know it.
2829 vt420pc|DEC VT420 w/PC keyboard,
2830 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2831 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2832 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2833 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2834 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2835 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2836 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2837 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2838 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2839 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2840 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2841 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2842 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2843 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2844 pctrm=USR_TERM\:vt420pcdos\:,
2845 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2848 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2850 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2852 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2853 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2855 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2856 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2857 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2858 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2859 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2860 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2861 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2866 vt510pc|DEC VT510 w/PC keyboard,
2868 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2873 # The VT520 is a monochrome text terminal capable of managing up to
2874 # four independent sessions in the terminal. It has multiple ANSI
2875 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2876 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2877 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2879 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2880 # [Alt]/[Print Screen] depending upon which keyboard and which
2881 # terminal mode is being used. If Set-Up has been disabled or
2882 # assigned to an unknown key, Set-Up may be entered by pressing
2883 # [F3] as the first key after power up, regardless of keyboard type.
2885 use=ansi+rca, use=vt420, use=ansi+tabs,
2890 #### VT100 emulations
2893 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2894 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2895 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2896 # that this works best with a stock vt100 entry.
2897 dec-vt100|EWAN telnet's vt100 emulation,
2900 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2901 dec-vt220|DOS tnvt200 terminal emulator,
2904 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2905 # anyone who needs PC VT340 emulation. (or anything below that level, for
2906 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2907 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2908 # I can send the address if requested.
2909 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2910 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2911 z340|zstem vt340 terminal emulator 132col 42line,
2913 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2914 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2916 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2918 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2919 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2922 # CRT is shareware. It implements some xterm features, including mouse.
2923 crt|crt-vt220|CRT 2.3 emulating VT220,
2926 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2928 # PuTTY 0.55 (released 3 August 2004)
2929 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2931 # Comparing with 0.51, vttest is much better (only a few problems with the
2932 # cursor position reports and wrapping).
2934 # PuTTY 0.51 (released 14 December 2000)
2936 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2937 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2938 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2939 # to xterm, which is incorrect, since several features are misimplemented:
2941 # Alt+key always sends ESC+key, so 'km' capability is removed.
2943 # Control responses, wrapping and tabs are buggy, failing a couple of
2944 # screens in vttest.
2946 # xterm mouse support is not implemented (unrelease version may).
2948 # Several features such as backspace/delete are optional; this entry documents
2949 # the default behavior -TD
2951 putty|PuTTY terminal emulator,
2952 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
2953 colors#8, it#8, ncv#22, pairs#64, U8#1,
2954 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2955 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2956 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2957 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2958 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2960 dch=\E[%p1%dP, dch1=\E[P,
2961 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2962 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2963 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
2964 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
2965 ind=^J, indn=\E[%p1%dS,
2966 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2967 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2968 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2969 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2970 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2971 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2972 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2973 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2974 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2975 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2976 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2977 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2978 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2979 rmso=\E[27m, rmul=\E[24m,
2980 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2981 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2982 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2983 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2984 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2985 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2986 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq,
2988 vt100-putty|Reset PuTTY to pure vt100,
2989 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2991 # palette is hardcoded...
2992 putty-256color|PuTTY 0.58 with xterm 256-colors,
2993 initc@, use=xterm+256color, use=putty,
2995 # One of the keyboard selections is "VT100+".
2996 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2997 putty-vt100|VT100+ keyboard layout,
2998 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2999 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3000 kf9=\EOX, use=putty,
3002 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3004 # Use modifiers to obtain function keys past 12:
3007 # F25-F36 - control/alt
3008 # F37-F48 - control/shift
3010 putty-sco|putty with SCO function keys,
3011 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3012 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3013 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3014 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3015 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3016 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3017 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3018 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3019 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3020 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3021 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3022 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3024 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3025 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3026 # (communication program) which supports:
3028 # - Serial port connections.
3029 # - TCP/IP (telnet) connections.
3030 # - VT100 emulation, and selected VT200/300 emulation.
3031 # - TEK4010 emulation.
3032 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3034 # - Scripts using the "Tera Term Language".
3035 # - Japanese and Russian character sets.
3037 # The program does not come with terminfo or termcap entries. However, the
3038 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3039 # vt52 or doublesize character support; blinking is done with color). Besides
3040 # the HPA, VPA extensions it also implements CPL and CNL.
3042 # All of the function keys can be remapped. This description shows the default
3043 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3044 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3045 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3053 # ANSI colors are implemented, but cannot be combined with video attributes
3054 # except for reverse.
3056 # No fonts are supplied with the program, so the acsc string is chosen to
3057 # correspond with the default Microsoft terminal font.
3059 # Tera Term recognizes some xterm sequences, including those for setting and
3060 # retrieving the window title, and for setting the window size (i.e., using
3061 # "resize -s"), though it does not pass SIGWINCH to the application if the
3062 # user resizes the window with the mouse.
3063 teraterm2.3|Tera Term Pro,
3066 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3067 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3068 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3069 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3070 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3071 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3072 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3073 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3074 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3075 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3076 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3077 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3078 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3079 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3080 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3081 use=klone+color, use=vt100,
3083 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3084 # to choose a Windows OEM font).
3086 # Testing with tack:
3087 # - it does not have xenl (suppress that)
3088 # - underline seems to work with color (modify ncv).
3089 # Testing with vttest:
3090 # - wrapping differs from vt100 (menu 1).
3091 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3093 # - it recognizes the dtterm window controls for reporting size in
3094 # characters and pixels.
3095 # - it passes SIGWINCH.
3096 teraterm4.59|Tera Term Pro,
3099 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3100 kmous=\E[M, use=teraterm2.3,
3105 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3106 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3109 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3110 # for casual (occasional) use. Also fails several of the vttest screens,
3111 # but that is not unusual for vt100 "emulators".
3112 # b) Does not implement vt100 keypad
3113 # c) Recognizes a subset of vt52 controls.
3114 ms-vt100|MS telnet imitating dec vt100,
3116 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3117 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3118 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3120 # Tested with Windows 2000, the telnet application runs in a console window,
3121 # also using 'Terminal' font.
3124 # a) This version has no function keys or numeric keypad. Unlike the older
3125 # version, the numeric keypad is entirely ignored.
3126 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3127 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3129 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3132 # Based on comments from Federico Bianchi:
3134 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3135 # scheme for PF keys.
3137 # and PuTTY wishlist:
3139 # The modifiers are represented as the codes listed above, prefixed to
3140 # the normal sequences. If the modifier is pressed alone, its sequence
3141 # is transmitted twice in succession. If multiple modifiers apply,
3142 # they're transmitted in the order shift, control, alt.
3147 ms-vt100+|vt100+|windows XP vt100+ (sic),
3148 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3149 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3150 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3151 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3152 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3153 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3154 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3155 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3156 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3157 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3158 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3159 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3160 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3161 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3162 knp=\E/, kpp=\E?, use=ms-vt100-color,
3164 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3167 # expect-5.44.1.15/example/tkterm
3168 # a minimal subset of a vt100 (compare with "news-unk).
3170 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3171 tt|tkterm|Don Libes' tk text widget terminal emulator,
3172 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3173 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3174 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3175 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3178 ######## X TERMINAL EMULATORS
3181 # You can add the following line to your .Xdefaults to change the terminal type
3182 # set by the xterms you start up to my-xterm:
3184 # *termName: my-xterm
3186 # System administrators can change the default entry for xterm instances
3187 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3188 # case, xterm will detect and reject an invalid terminal type, falling back
3189 # to the default of xterm.
3192 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3193 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3194 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3195 # as these seem not to work -- esr)
3196 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3197 OTbs, am, km, mir, msgr, xenl, xon,
3198 cols#80, it#8, lines#65,
3199 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3200 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3201 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3202 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3203 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3204 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3205 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3206 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3207 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3208 smso=\E[7m, smul=\E[4m,
3209 # Compatible with the R5 xterm
3210 # (from the XFree86 3.2 distribution, <blink=@> removed)
3211 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3212 # corrected typos in rs2 string - TD
3214 xterm-r5|xterm R5 version,
3215 OTbs, am, km, msgr, xenl,
3216 cols#80, it#8, lines#24,
3217 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3218 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3219 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3220 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3221 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3222 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3223 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3224 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3225 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3226 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3227 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3228 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3229 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3230 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3232 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3234 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3235 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3236 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3237 # Compatible with the R6 xterm
3238 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3239 # added khome/kend, hts based on the R6 xterm code - TD
3240 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3241 # for compatibility with other emulators).
3242 xterm-r6|xterm X11R6 version,
3243 OTbs, am, km, mir, msgr, xenl,
3244 cols#80, it#8, lines#24,
3245 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3246 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3247 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3248 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3249 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3250 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3251 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3253 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3254 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3255 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3256 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3257 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3258 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3259 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3260 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3261 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3262 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3263 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3264 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3265 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3266 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3268 xterm-old|antique xterm version,
3270 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3271 # The name has been changed and some aliases have been removed.
3272 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3273 OTbs, am, bce, km, mir, msgr, xenl, XT,
3274 cols#80, it#8, lines#24, ncv@,
3275 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3276 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3277 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3278 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3279 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3280 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3281 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3282 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3283 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3284 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3286 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3287 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3288 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3289 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3290 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3291 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3292 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3293 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3294 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3295 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3296 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3297 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3298 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3299 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3300 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3301 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3302 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3303 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3304 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3305 use=ecma+color, use=vt220+keypad,
3307 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3308 # codes for F1-F4 except while in VT220 mode.
3309 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3310 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3312 # This version was released in XFree86 3.3.3 (November 1998).
3313 # Besides providing printer support, it exploits a new feature that allows
3314 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3315 # -- the distribution contained incorrect khome/kend values -TD
3316 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3317 blink=\E[5m, ich1@, invis=\E[8m,
3318 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3319 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3320 rs2=\E[!p\E[?3;4l\E[4l\E>,
3321 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3322 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3325 # This version was released in XFree86 4.0.
3326 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3328 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3329 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3330 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3331 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3332 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3333 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3334 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3335 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3336 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3337 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3338 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3339 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3340 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3341 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3342 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3343 smcup=\E[?1049h, use=xterm-xf86-v333,
3345 # This version was released in XFree86 4.3.
3346 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3347 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3348 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3350 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3353 # This version was released in XFree86 4.4.
3354 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3355 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3356 rin=\E[%p1%dT, use=xterm-xf86-v43,
3358 xterm-xfree86|xterm terminal emulator (XFree86),
3361 # This version reflects the current xterm features.
3362 xterm-new|modern xterm terminal emulator,
3364 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3365 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3368 # This fragment is for people who cannot agree on what the backspace key
3370 xterm+kbs|fragment for backspace key,
3373 # This fragment describes as much of XFree86 xterm's "pc-style" function
3374 # keys as will fit into terminfo's 60 function keys.
3377 # ---------------------------------
3384 # 8 Shift + Alt + Control
3385 # ---------------------------------
3386 # The meta key may also be used as a modifier in this scheme, adding another
3387 # bit to the parameter.
3388 xterm+pcfkeys|fragment for PC-style fkeys,
3389 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3392 xterm+noapp|fragment with cursor keys in normal mode,
3393 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3396 xterm+app|fragment with cursor keys in application mode,
3397 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3400 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3401 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3402 # the earlier scheme, as noted in the "use=" clauses in this file.
3404 # The original assignments from patch #94 for cursor-keys had some technical
3407 # A parameter for a function-key to represent a modifier is just more
3408 # bits. But for a cursor-key it may change the behavior of the
3409 # application. For instance, emacs decodes the first parameter of a
3410 # cursor-key as a repeat count.
3412 # A parameterized string should (really) not begin with SS3 (\EO).
3413 # Rather, CSI (\E[) should be used.
3415 # For these reasons, the original assignments were deprecated. For
3416 # compatibility reasons, they are still available as a setting of xterm's
3417 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3418 # that might apply to xterm+pcfkeys with different values of that resource.
3419 xterm+pcc3|fragment with modifyCursorKeys:3,
3420 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3421 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3422 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3423 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3424 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3425 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3426 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3427 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3430 xterm+pcc2|fragment with modifyCursorKeys:2,
3431 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3432 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3433 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3434 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3435 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3436 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3437 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3439 xterm+pcc1|fragment with modifyCursorKeys:1,
3440 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3441 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3442 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3443 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3444 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3445 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3447 xterm+pcc0|fragment with modifyCursorKeys:0,
3448 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3449 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3450 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3451 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3452 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3453 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3456 # Here are corresponding fragments from xterm patch #216:
3458 xterm+pcf0|fragment with modifyFunctionKeys:0,
3459 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3460 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3461 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3462 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3463 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3464 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3465 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3466 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3467 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3468 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3469 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3470 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3471 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3472 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3473 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3474 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3475 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3477 xterm+pcf2|fragment with modifyFunctionKeys:2,
3478 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3479 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3480 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3481 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3482 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3483 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3484 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3485 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3486 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3487 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3488 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3489 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3490 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3491 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3492 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3493 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3494 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3495 kf8=\E[19~, kf9=\E[20~,
3497 # Chunks from xterm #230:
3498 xterm+pce2|fragment with modifyCursorKeys:2,
3499 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3500 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3501 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3502 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3503 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3504 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3505 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3506 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3507 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3508 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3509 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3512 xterm+edit|fragment for 6-key editing-keypad,
3513 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3516 xterm+pc+edit|fragment for pc-style editing keypad,
3517 kend=\E[4~, khome=\E[1~,
3519 xterm+vt+edit|fragment for vt220-style editing keypad,
3520 kfnd=\E[1~, kslt=\E[4~,
3523 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3524 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3525 # is shown here (because that is used in mrxvt and mlterm):
3526 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3527 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3528 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3529 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3530 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3531 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3532 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3533 kf63=\E[13;4~, use=xterm+pcf2,
3535 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3536 xterm-basic|modern xterm terminal emulator - common,
3537 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
3538 colors#8, cols#80, it#8, lines#24, pairs#64,
3539 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3540 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3541 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3542 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3543 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3544 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3545 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3546 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3547 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3548 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3549 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
3550 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
3551 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
3552 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
3553 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
3554 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
3556 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3557 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3558 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3559 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3560 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3561 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J,
3562 use=ansi+pp, use=xterm+kbs, use=vt100+enq,
3564 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3565 # In retrospect, something like xterm-r6 was intended here -TD
3566 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3567 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3569 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3570 # If configured to support 88- or 256-colors (which is fairly common in 2009),
3571 # xterm also recognizes the control sequences for initc -TD
3572 xterm-16color|xterm with 16 colors like aixterm,
3574 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3575 use=ibm+16color, use=xterm-new,
3577 # 256-colors is a compile-time feature of XFree86 xterm beginning with
3578 # patch #111 (1999/7/10) -TD
3579 xterm+256color|xterm 256-color feature,
3581 colors#256, pairs#32767,
3582 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3583 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3584 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3587 # 88-colors is a compile-time feature of XFree86 xterm beginning with
3588 # patch #115 (1999/9/18) -TD
3590 # Note that the escape sequences used are the same as for 256-colors - xterm
3591 # has a different table of default color resource values. If built for
3592 # 256-colors, it can still handle an 88-color palette by using the initc
3595 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3596 # which support the xterm+256color feature support the associated initc
3597 # capability. So it is cancelled in the entries which use this and/or the
3598 # xterm+256color block.
3600 # The default color palette for the 256- and 88-colors are different. A
3601 # given executable will have one palette (perhaps compiled-in). If the program
3602 # supports xterm's control sequence, it can be programmed using initc.
3603 xterm+88color|xterm 88-color feature,
3604 colors#88, pairs#7744, use=xterm+256color,
3606 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3607 xterm-256color|xterm with 256 colors,
3608 use=xterm+256color, use=xterm-new,
3609 xterm-88color|xterm with 88 colors,
3610 use=xterm+88color, use=xterm-256color,
3612 # These two are used to demonstrate the any-event mouse support, i.e., by
3613 # using an extended name "XM" which tells ncurses to put the terminal into
3614 # a special mode when initializing the xterm mouse.
3615 xterm-1002|testing xterm-mouse,
3616 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3617 xterm-1003|testing xterm-mouse,
3618 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3620 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
3621 # asked for some of xterm's advanced features to be added to its terminfo
3622 # entry. It defines extended capabilities not found in standard terminfo or
3623 # termcap. These are useful in tmux, for instance, hence the name.
3625 # One caveat in adding extended capabilities in ncurses is that if the names
3626 # are longer than two characters, then they will not be visible through the
3627 # termcap interface.
3629 # Ms modifies the selection/clipboard. Its parameters are
3630 # p1 = the storage unit (clipboard, selection or cut buffer)
3631 # p2 = the base64-encoded clipboard content.
3633 # Ss is used to set the cursor style as described by the DECSCUSR
3634 # function to a block or underline.
3635 # Se resets the cursor style to the terminal power-on default.
3637 # Cs and Cr set and reset the cursor colour.
3638 xterm+tmux|advanced xterm features used in tmux,
3639 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
3640 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
3642 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3643 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3644 # To use it, your decTerminalID resource must be set to 200 or above.
3651 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3652 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3653 colors#8, cols#80, it#8, lines#24, pairs#64,
3654 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3655 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3656 civis=\233?25l, clear=\233H\2332J,
3657 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3658 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3659 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3660 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3661 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3662 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3663 flash=\233?5h$<100/>\233?5l, home=\233H,
3664 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3665 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3666 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3667 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
3668 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3669 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3670 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3671 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3672 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3673 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3674 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3675 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3676 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3677 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3678 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3679 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3681 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3682 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3683 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3684 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3685 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3686 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3687 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3688 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3689 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3692 xterm-hp|xterm with hpterm function keys,
3693 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3694 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3695 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3696 knp=\ES, kpp=\ET, use=xterm-basic,
3698 xterm-sco|xterm with SCO function keys,
3699 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3700 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3701 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3702 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3703 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3704 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3705 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3706 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3707 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3708 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3709 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3710 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3713 # The xterm-new description has all of the features, but is not completely
3714 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3715 # sunKeyboard resource to true:
3716 # + maps the editing keypad
3717 # + interprets control-function-key as a second array of keys, so a
3718 # 12-fkey keyboard can support vt220's 20-fkeys.
3719 # + maps numeric keypad "+" to ",".
3720 # + uses DEC-style control sequences for the application keypad.
3722 xterm-vt220|xterm emulating vt220,
3723 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3724 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3725 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3726 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3727 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3728 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3729 use=xterm+app, use=xterm+edit, use=xterm-basic,
3732 xterm-vt52|xterm emulating dec vt52,
3733 cols#80, it#8, lines#24,
3734 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3735 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3736 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3737 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3738 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3741 xterm-noapp|xterm with cursor keys in normal mode,
3742 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3745 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3746 lines#24, use=xterm-old,
3748 # This is xterm for ncurses.
3749 xterm|xterm terminal emulator (X Window System),
3752 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
3753 # setting the vt100Graphics resource to false.
3754 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
3757 # These building-blocks allow access to the X titlebar and icon name as a
3758 # status line. There are a few problems in using them in entries:
3760 # a) tsl should have a parameter to denote the column on which to transfer to
3762 # b) the "0" code for xterm updates both icon-title and window title. Some
3763 # window managers such as twm (and possibly window managers descended from
3764 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
3765 # don't want to mess with icon-name when using those window managers.
3766 xterm+sl|access X title line and icon name,
3768 dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
3769 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3771 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
3773 # In contrast, this block can be used for a DEC vt320 and up. There are two
3776 # DECSASD (select active status display)
3777 # \E[0$} Main display
3778 # \E[1$} Status line
3780 # DECSSDT (select status line type)
3781 # \E[0$~ No status line
3782 # \E[1$~ Indicator status line
3783 # \E[2$~ Host-writable status line
3785 # The building block assumes that the terminal always shows something at the
3786 # status line (either the indicator, or status line). That is because if no
3787 # status line is used, then the terminal makes that line part of the user
3788 # window, changing its size without notice.
3790 # Because there is no "esl" (enable status line) capability, the "tsl"
3791 # capability ensures that the status line is host-writable. A DEC terminal
3792 # will clear the status line when changing from indicator to host-writable
3795 # Once on the status line, the row part of cursor addressing is ignored. Since
3796 # tsl expects a parameter (to specify the column), the shortest addressing that
3797 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
3799 dec+sl|DEC VTxx status line,
3801 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
3804 # The following xterm variants don't depend on your base version
3806 # xterm with bold instead of underline
3807 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3808 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
3809 smso=\E[7m, smul=\E[1m, use=xterm-old,
3811 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3812 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3813 ich@, ich1@, use=xterm,
3814 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3815 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3816 rmcup@, smcup@, use=xterm,
3819 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3820 # (kterm should not invoke DEC Graphics as the alternate character set
3821 # -- Kenji Rikitake)
3822 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3823 # -- MATSUMOTO Shoji)
3824 # kterm implements acsc via built-in table of X Drawable's
3825 kterm|kterm kanji terminal emulator (X window system),
3828 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3829 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3830 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3831 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3832 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3833 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3834 kterm-color|kterm-co|kterm with ANSI colors,
3835 ncv@, use=kterm, use=ecma+color,
3838 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3839 # variant of xterm which is apparently no longer supported, but are interesting
3840 # because they illustrate SVr4 curses mouse controls - T.Dickey
3841 xtermm|xterm terminal emulator (monocrome),
3842 OTbs, am, km, mir, msgr, xenl,
3843 btns#3, cols#80, it#8, lines#24,
3844 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3845 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3846 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
3847 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3848 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3849 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3850 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3851 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3852 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3853 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3854 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3855 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3856 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3857 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3858 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3859 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3860 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3861 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3862 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3864 xtermc|xterm terminal emulator (color),
3865 colors#8, ncv#7, pairs#64,
3866 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3867 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3868 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3871 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3872 # Here's a termcap entry I've been using for xterm_color, which comes
3873 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3874 # color stuff, I also have a status line defined as the window manager
3875 # title bar. [I have translated it to terminfo -- ESR]
3876 xterm-pcolor|xterm with color used for highlights and status line,
3878 bold=\E[1;43m, rev=\E[7;34m,
3879 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
3880 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
3882 # This describes the capabilities of color_xterm, an xterm variant from
3883 # before ECMA-64 color support was folded into the main-line xterm release.
3884 # This entry is straight from color_xterm's maintainer.
3885 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3886 # The README's with the distribution also say that it supports SGR 21, 24, 25
3887 # and 27, but they are not present in the terminfo or termcap.
3888 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3889 OTbs, am, km, mir, msgr, xenl, XT,
3890 cols#80, it#8, lines#65, ncv@,
3891 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3892 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3893 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3894 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3895 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3896 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3897 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3898 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3899 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3900 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3901 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3902 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3903 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3904 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3905 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3906 rmso=\E[27m, rmul=\E[24m,
3907 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3909 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3910 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3911 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3912 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3914 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3915 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3916 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3917 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3918 # that each of those implements the home, end, delete keys differently.
3920 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3921 # colors; note that this is not compatible with the 5.2 version.
3922 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3923 # match XFree86's xterm.terminfo usage and prevent circular links
3924 xterm-color|nxterm|generic color xterm,
3926 op=\E[m, use=xterm-r6, use=klone+color,
3928 # This entry describes an xterm with Sun-style function keys enabled
3929 # via the X resource setting "xterm*sunFunctionKeys:true"
3930 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
3931 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
3932 # because we want it to be seen as <kcpy>.
3933 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
3934 # with their Sun keyboard labels instead.
3935 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
3936 xterm-sun|xterm with sunFunctionKeys true,
3937 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
3938 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
3939 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
3940 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
3941 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
3942 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
3943 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
3944 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
3945 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
3946 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
3947 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
3948 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
3950 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
3951 cols#80, lines#24, use=xterm-sun,
3954 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3955 gnome-rh62|Gnome terminal,
3957 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3960 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3962 # This implements a subset of vt102 with a random selection of features from
3963 # other terminals such as color and function-keys.
3965 # shift-f1 to shift-f10 are f11 to f20
3967 # NumLock changes the application keypad to approximate vt100 keypad, except
3968 # that there is no escape sequence matching comma (,).
3970 # Other defects observed:
3971 # vt100 LNM mode is not implemented.
3972 # vt100 80/132 column mode is not implemented.
3973 # vt100 DECALN is not implemented.
3974 # vt100 DECSCNM mode is not implemented, so flash does not work.
3975 # vt100 TBC (tab reset) is not implemented.
3976 # xterm alternate screen controls do not restore cursor position properly
3977 # it hangs in tack after running function-keys test.
3978 gnome-rh72|GNOME Terminal,
3980 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3981 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3982 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3983 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3985 # GNOME Terminal 2.0.1 (Redhat 8.0)
3987 # Documentation now claims it implements vt220 (which is demonstrably false).
3988 # However, it does implement ECH, which is a vt220 feature. And there are
3989 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3990 # more of its bugs using vttest.
3992 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3993 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3995 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3996 # operations. Shift-tab generates a distinct sequence so it can be argued
3997 # that it implements kcbt.
3998 gnome-rh80|GNOME Terminal,
4000 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4001 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4003 # GNOME Terminal 2.2.1 (Redhat 9.0)
4005 # bce and msgr are repaired.
4006 gnome-rh90|GNOME Terminal,
4008 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4009 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4010 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4013 # GNOME Terminal 2.14.2 (Fedora Core 5)
4014 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4015 gnome-fc5|GNOME Terminal,
4017 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4018 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4020 # GNOME Terminal 2.18.1 (2007 snapshot)
4022 # For any "recent" version of gnome-terminal, it is futile to attempt to
4023 # support modifiers on cursor- and keypad keys because the program usually
4024 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4025 # of the keys (which more/less correspond to the termcap values), and will
4026 # interpret those according to the $TERM value, but others not in the
4027 # terminfo according to some constantly changing set of hacker guidelines -TD
4028 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4029 use=xterm+pcc2, use=gnome-fc5,
4030 gnome-2007|GNOME Terminal snapshot 2.18.1,
4033 # GNOME Terminal 2.22.3 (2008 snapshot)
4035 # In vttest, it claims to be a vt220 with national replacement character-sets,
4036 # but aside from the identifier string, implements only a small fraction of
4037 # vt220's behavior, which will make it less usable on a VMS system (unclear
4038 # what the intent of the developer is, since the NRC feature exposed in vttest
4039 # by this change does not work).
4040 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4041 use=vte+pcfkeys, use=vte-2007,
4042 gnome-2008|GNOME Terminal snapshot 2.22.3,
4045 # GNOME Terminal 3.6.0 (2012)
4046 # VTE 0.34.1 refers to an unreleased version as of 2012-10-13 (0.34.0 was
4047 # released 2012-09-26, 0.34.1 has not been marked in git) -TD
4048 vte-2012|VTE 0.34.1,
4049 ritm=\E[23m, sitm=\E[3m, use=xterm+pcc2, use=gnome-fc5,
4050 gnome-2012|GNOME Terminal 3.6.0,
4053 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4054 # supply key information which is not built into the program. With 2.22.3,
4055 # this list is built into the program (which addresses the inadvertant use of
4056 # random terminfo data, though using a set of values which does not correspond
4057 # to any that xterm produces - still not solving the problem that GNOME
4058 # terminal hardcodes the $TERM variable as "xterm").
4060 # terminfo modifier code keys
4061 # kf13-kf24 shift 2 F1 to F12
4062 # kf25-kf36 control 5 F1 to F12
4063 # kf37-kf48 shift/control 6 F1 to F12
4064 # kf49-kf60 alt 3 F1 to F12
4065 # kf61-kf63 shift-alt 4 F1 to F3
4067 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4068 # no parameters. This appears to be rote copying based on xterm+pcc0.
4069 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4070 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4071 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4072 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4073 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4074 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4075 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4077 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4080 vte|VTE aka GNOME Terminal,
4082 gnome|GNOME Terminal,
4085 # palette is hardcoded...
4086 vte-256color|VTE with xterm 256-colors,
4087 initc@, use=xterm+256color, use=vte,
4088 gnome-256color|GNOME Terminal with xterm 256-colors,
4091 # XFCE Terminal 0.2.5.4beta2
4093 # This is based on some of the same source code, e.g., the VTE library, as
4094 # gnome-terminal, but has fewer features, fails more screens in vttest.
4095 # Since most of the terminfo-related behavior is due to the VTE library,
4096 # the terminfo is the same as gnome-terminal.
4101 # Multi-Gnome-Terminal 1.6.2
4103 # This does not use VTE, and does have different behavior (compare xfce and
4105 mgt|Multi GNOME Terminal,
4106 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4109 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4110 # or not is debatable).
4113 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4116 # (formerly known as kvt)
4118 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4119 # simplify this entry (and point out why konsole isn't xterm), we base this on
4120 # xterm-r6. The default keyboard appears to be 'linux'.
4123 # a) konsole implements several features from XFree86 xterm, though none of
4124 # that is documented - except of course in its source code - apparently
4125 # because its implementors are unaccustomed to reading documentation - as
4126 # evidenced by the sparse and poorly edited documentation distributed with
4127 # konsole. Some features such as the 1049 private mode are recognized but
4128 # incorrectly implemented as a duplicate of the 47 private mode.
4129 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4130 # sends PC-style escapes rather than vt100.
4131 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4132 # parse some control sequences. Also fails vttest Primary Device Attributes
4133 # by sending a bogus code (in the source it says it's supposed to be a
4134 # vt220, which is doubly incorrect because it does not implement vt220
4135 # control sequences except for a few special cases). Treat it as a
4136 # mildly-broken vt102.
4138 # Update for konsole 1.3.2:
4139 # The 1049 private mode works (but see the other xterm screens in vttest).
4140 # Primary Device Attributes now returns the code for a vt100 with advanced
4141 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4143 # Updated for konsole 1.6.4:
4144 # add konsole-solaris
4146 # Updated for konsole 1.6.6:
4147 # add control-key modifiers for function-keys, etc.
4149 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4150 # different from xterm (and vt100's). They have the same behavior in this
4151 # detail, but it is unclear which copies the other.
4152 konsole-base|KDE console window,
4155 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4156 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4157 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4158 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4159 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4160 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4161 rmso=\E[27m, rmul=\E[24m,
4162 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4163 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4164 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4165 use=ecma+color, use=xterm-r6,
4166 konsole-linux|KDE console window with linux keyboard,
4167 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4168 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4169 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4170 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4171 konsole-solaris|KDE console window with Solaris keyboard,
4172 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4173 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4174 # than testing the code.
4175 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4176 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4177 # The value for kbs reflects local customization rather than the settings used
4178 # for XFree86 xterm.
4179 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4180 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4182 # Konsole does not implement shifted cursor-keys.
4183 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4184 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4186 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4187 # it is still useful for deriving the other entries.
4188 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4189 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4190 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4191 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4192 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4193 khome=\E[H, use=konsole-base,
4194 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4195 kbs=^H, kdch1=\177, use=konsole-vt100,
4196 konsole-16color|klone of xterm-16color,
4197 ncv#32, use=ibm+16color, use=konsole,
4198 # make a default entry for konsole
4199 konsole|KDE console window,
4202 # palette is hardcoded...
4203 konsole-256color|KDE console window with xterm 256-colors,
4204 initc@, use=xterm+256color, use=konsole,
4207 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4209 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4212 # The function keys are numbered based on shift/control/alt modifiers, except
4213 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4214 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4215 # how it is configured.
4217 # kf1 to kf12 \E[11~ to \E[24~
4218 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4219 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4220 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4221 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4222 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4223 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4224 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4226 mlterm|multi lingual terminal emulator,
4227 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4228 colors#8, cols#80, it#8, lines#24, pairs#64,
4229 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4230 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4231 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4232 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4233 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4234 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4235 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4236 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4237 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4238 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4239 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4240 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4241 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4242 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4243 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4244 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4245 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4246 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4247 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4248 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4249 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4250 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4251 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4252 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4253 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4255 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4256 # looks in its termcap to decide which string to send. If it used terminfo
4257 # (when available), it could use the extended names introduced for xterm.
4258 mlterm+pcfkeys|fragment for PC-style fkeys,
4259 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4260 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4261 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4262 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4263 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4264 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4265 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4266 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4267 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4269 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4270 use=xterm+256color, use=rxvt,
4273 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4274 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4277 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4278 # but some applications don't work with that.
4279 # It also has an AIX extension
4283 # but the latter does not work correctly.
4285 # The distributed terminfo says it implements hpa and vpa, but they are not
4286 # implemented correctly, using relative rather than absolute positioning.
4288 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4289 # Since rxvt is not really compatible with xterm, it should be configured as
4290 # "rxvt" or "rxvt-color".
4292 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4293 # remove km as per tack test -TD
4294 rxvt-basic|rxvt terminal base (X Window System),
4295 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4296 cols#80, it#8, lines#24,
4297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4298 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4299 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4300 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4301 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4302 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4303 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4304 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4305 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4306 ind=^J, is1=\E[?47l\E=\E[?1l,
4307 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4308 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4309 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4311 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4312 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4313 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4314 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4315 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4316 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4317 use=rxvt+pcfkeys, use=vt220+keypad,
4318 # Key Codes from rxvt reference:
4320 # Note: Shift + F1-F10 generates F11-F20
4322 # For the keypad, use Shift to temporarily override Application-Keypad
4323 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4324 # is off, escape sequences toggle Application-Keypad setting.
4325 # Also note that values of Home, End, Delete may have been compiled
4326 # differently on your system.
4328 # Normal Shift Control Ctrl+Shift
4329 # Tab ^I ESC [ Z ^I ESC [ Z
4330 # BackSpace ^H ^? ^? ^?
4331 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4332 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4333 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4334 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4335 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4336 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4337 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4338 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4339 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4340 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4341 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4342 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4343 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4344 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4345 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4346 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4347 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4348 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4349 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4350 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4351 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4352 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4353 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4354 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4355 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4356 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4357 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4358 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4359 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4362 # Up ESC [ A ESC [ a ESC O a ESC O A
4363 # Down ESC [ B ESC [ b ESC O b ESC O B
4364 # Right ESC [ C ESC [ c ESC O c ESC O C
4365 # Left ESC [ D ESC [ d ESC O d ESC O D
4366 # KP_Enter ^M ESC O M
4367 # KP_F1 ESC O P ESC O P
4368 # KP_F2 ESC O Q ESC O Q
4369 # KP_F3 ESC O R ESC O R
4370 # KP_F4 ESC O S ESC O S
4371 # XK_KP_Multiply * ESC O j
4372 # XK_KP_Add + ESC O k
4373 # XK_KP_Separator , ESC O l
4374 # XK_KP_Subtract - ESC O m
4375 # XK_KP_Decimal . ESC O n
4376 # XK_KP_Divide / ESC O o
4388 # The source-code for rxvt actually defines mappings for F21-F35, using
4389 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4390 # are rare, so this entry uses the shift- and control-modifiers as in
4391 # xterm+pcfkeys to define keys past F12.
4393 # kIC is normally not used, since rxvt performs a paste for that (shifted
4394 # insert), unless private mode 35 is set.
4396 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4397 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4398 rxvt+pcfkeys|fragment for PC-style fkeys,
4399 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4400 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4401 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4402 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4403 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4404 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4405 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4406 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4407 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4408 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4409 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4410 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4411 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4412 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4413 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4414 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4415 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4416 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4417 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4418 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4420 rxvt|rxvt terminal emulator (X Window System),
4422 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4423 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4424 rxvt-color|rxvt terminal emulator (X Window System),
4426 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4427 use=xterm+256color, use=rxvt,
4428 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4429 use=xterm+88color, use=rxvt,
4430 rxvt-xpm|rxvt terminal emulator (X Window System),
4432 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4433 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4435 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4436 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4439 # This variant is supposed to work with rxvt 2.7.7 when compiled with
4440 # NO_BRIGHTCOLOR defined. rxvt needs more work...
4441 rxvt-16color|xterm with 16 colors like aixterm,
4442 ncv#32, use=ibm+16color, use=rxvt,
4447 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4448 # makes its function-keys different from other flavors of rxvt -TD
4449 mrxvt|multitabbed rxvt,
4451 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4452 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4453 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4454 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4455 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4456 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4459 mrxvt-256color|multitabbed rxvt with 256 colors,
4460 use=xterm+256color, use=mrxvt,
4463 # From: Michael Jennings <mej@valinux.com>
4467 # removed kf0 which conflicts with kf10 -TD
4468 # remove cvvis which conflicts with cnorm -TD
4469 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4470 # but does otherwise follow the rxvt+pcfkeys model -TD
4471 # remove nonworking flash -TD
4472 # remove km as per tack test -TD
4473 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4474 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
4475 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4476 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4477 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4478 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4479 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4480 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4482 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4483 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4484 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4485 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4486 is1=\E[?47l\E>\E[?1l,
4487 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4488 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4489 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4490 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4491 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4492 rmso=\E[27m, rmul=\E[24m,
4493 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4494 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4496 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4497 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4498 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4499 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4502 Eterm-256color|Eterm with xterm 256-colors,
4503 use=xterm+256color, use=Eterm,
4505 Eterm-88color|Eterm with 88 colors,
4506 use=xterm+88color, use=Eterm,
4509 # Based on rxvt 2.4.8, it has a few differences in key bindings
4510 aterm|AfterStep terminal,
4512 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4516 # This is not based on xterm's source...
4517 # vttest shows several problems with keyboard, cursor-movements.
4518 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4519 xiterm|internationalized terminal emulator for X,
4521 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4525 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4526 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4527 # chars look like --esr)
4528 hpterm|X-hpterm|hp X11 terminal emulator,
4529 am, da, db, mir, xhp,
4530 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4531 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4532 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4533 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4534 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4535 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4536 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4537 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4538 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4539 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4540 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4541 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4542 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4543 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4544 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4546 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4547 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4548 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4549 # HPUX 11 provides a color version.
4550 hpterm-color|HP X11 terminal emulator with color,
4554 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4555 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4558 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4559 # It corresponds to emu's internal emulation:
4561 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4562 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4563 # fixes: add civis, cnorm, sgr -TD
4564 emu|emu native mode,
4565 am, bce, mir, msgr, xon,
4566 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4567 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4568 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4569 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4570 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
4571 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4572 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4573 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4574 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4575 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4576 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4577 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4578 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4579 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4580 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4581 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4582 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4583 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4585 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4586 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4588 # vt220 Terminfo entry for the Emu emulation, corresponds to
4590 # with NumLock set (to make the keypad transmit kf0-kf9).
4591 # fixes: add am, xenl, corrected sgr0 -TD
4592 emu-220|Emu-220 (vt200-7bit mode),
4594 cols#80, it#8, lines#24, vt#200,
4595 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4596 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4597 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4598 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4599 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4600 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4601 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4602 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4603 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4604 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4605 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4606 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4607 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4608 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4609 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4610 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4611 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4612 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4613 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4614 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4615 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4616 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4617 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4618 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4621 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4622 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4623 # indicate that it emulates more than one terminal, but incompletely.
4625 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4626 # It is based on vt102's entry, with some subtle differences, but also
4628 # supports ANSI colors (except for 'op' string)
4629 # apparently implements alternate screen like xterm
4630 # does not use padding, of course.
4631 mvterm|vv100|SwitchTerm aka mvTERM,
4632 am, eslok, hs, km, mir, msgr, xenl,
4633 colors#8, cols#80, it#8, lines#24, pairs#64,
4634 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4635 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4636 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4637 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4638 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4639 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4640 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4641 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4642 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4643 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4644 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4645 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4646 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4648 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4649 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4650 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4651 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4652 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4653 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4657 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4659 # "mterm -type ansi" sets $TERM to "ansi"
4660 mterm-ansi|ANSI emulation,
4663 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4664 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4665 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4666 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4667 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4668 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4669 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4670 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4671 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4672 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4674 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4675 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4677 # mterm normally sets $TERM to "mterm"
4678 mterm|mouse-sun|Der Mouse term,
4681 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4682 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4683 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4684 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4685 # "mterm -type decansi" sets $TERM to "decansi"
4687 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4688 decansi|ANSI emulation with DEC compatibility hacks,
4689 am, mir, msgr, xenl,
4690 colors#8, it#8, pairs#64,
4691 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4692 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4693 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4694 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4695 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4696 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4697 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4698 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4699 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4700 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4701 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4702 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4703 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4704 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4705 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4706 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4707 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4708 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4709 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4710 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4711 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4712 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4713 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4714 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4715 u7=\E[6n, vpa=\E[%i%p1%dd,
4719 # vwmterm is a terminal emulator written for the VWM console window manager
4722 am, bce, ccc, mir, msgr, npc, xenl, xon,
4724 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4725 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4726 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
4727 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
4728 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
4729 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
4730 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
4731 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4732 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
4733 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4734 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4735 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
4736 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
4737 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4738 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4739 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4740 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4744 # MGR is a Bell Labs window system lighter-weight than X.
4745 # These entries describe MGR's xterm-equivalent.
4746 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4749 mgr|Bellcore MGR (non X) window system terminal emulation,
4751 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4752 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4753 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4754 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4755 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4756 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4757 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4758 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4759 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4761 mgr-sun|Mgr window with Sun keyboard,
4762 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4763 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4764 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4765 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4766 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4767 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4768 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4769 mgr-linux|Mgr window with Linux keyboard,
4770 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4771 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4772 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4773 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4774 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4780 # Note: the original terminfo description uses leading blank to persuade
4781 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
4784 # Reading the code shows it should work for aixterm 16-colors
4785 # - added st-16color
4788 # - set eo (erase-overstrike)
4790 # - tbc doesn't work
4792 # - cbt doesn't work
4793 # - shifted cursor-keys send sequences like rxvt
4794 # - sgr referred to unimplemented "invis" mode.
4795 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
4796 simpleterm|st| simpleterm,
4797 am, eo, mir, msgr, ul, xenl,
4798 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
4799 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4800 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4801 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4802 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4803 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4804 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
4805 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
4806 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
4807 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4808 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4809 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4810 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4811 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
4812 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
4813 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4814 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
4815 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
4816 st-16color|simpleterm with 16-colors,
4817 use=ibm+16color, use=simpleterm,
4818 # 256 colors "works", but when running xterm's test-scripts, some garbage is
4819 # shown in the titlebar.
4820 st-256color|simpleterm with 256 colors,
4822 initc@, use=xterm+256color, use=simpleterm,
4825 # http://software.jessies.org/terminator/
4826 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
4827 # Debian/current -TD (2011/8/20)
4829 # There are some packaging problems:
4830 # a) using Java, the program starts off using 50Mb, and climbs from there,
4831 # up to 114Mb after testing (no scrollback).
4832 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
4833 # (two copies, just in case the host happens to be Mac OS X).
4834 # I deleted this after testing with tack.
4836 # Issues/features found with tack:
4837 # a) tbc does not work (implying that hts also is broken).
4838 # Comparing with the tabs utility shows a problem with the last tabstop on
4840 # b) has xterm-style shifted function-key strings
4841 # meta also is used, but control is ignored.
4842 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
4843 # d) some combinations of shift/control send xterm-style sequences for
4844 # insert/delete/home/end.
4845 # e) numeric keypad sends only numbers (compare with vttest).
4846 # f) meta mode (km) is not implemented.
4848 # Issues found with ncurses test-program:
4849 # a) bce is inconsistently implemented
4850 # b) widths of Unicode values above 256 do not always agree with wcwidth.
4852 # Checked with vttest, found low degree of compatibility there.
4854 # Checked with xterm's scripts, found that the 256-color palette is fixed.
4858 # b) corrected sgr0 to reset alternate character set
4859 # c) modified smacs/rmacs to use SCS rather than SI/SO
4862 terminator|Terminator no line wrap,
4863 eo, mir, msgr, xenl, xon,
4864 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
4865 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4866 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4867 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4868 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4869 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4870 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4871 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
4872 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
4873 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
4874 ind=^J, is1=\E[?47l\E=\E[?1l,
4875 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4876 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4877 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4878 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4879 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4880 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4881 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4882 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
4883 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
4884 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4885 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
4886 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
4887 setaf=\E[38;5;%p1%dm,
4888 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
4889 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
4890 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
4893 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4896 # Columbus UNIX virtual terminal. This terminal also appears in
4897 # UNIX 4.0 and successors as line discipline 1 (?), but is
4898 # undocumented and does not really work quite right.
4899 cbunix|cb unix virtual terminal,
4901 cols#80, lines#24, lm#0,
4902 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4903 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4904 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4905 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4906 smso=\Ea^D, smul=\Ea^A,
4907 # (vremote: removed obsolete ":nl@:" -- esr)
4908 vremote|virtual remote terminal,
4910 cols#79, use=cbunix,
4912 pty|4bsd pseudo teletype,
4913 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4914 smso=\Ea$, smul=\Ea!, use=cbunix,
4916 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4917 eterm|gnu emacs term.el terminal emulation,
4920 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4921 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4922 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4923 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4924 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4925 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4926 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4927 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4928 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4931 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4932 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4933 am, mir, msgr, xenl,
4934 colors#8, cols#80, lines#24, pairs#64,
4935 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4936 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4937 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4938 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4939 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4940 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4941 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4942 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4943 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4944 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4945 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4946 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4947 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4948 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4949 u6=\E[%i%d;%dR, u7=\E[6n,
4951 # Entries for use by the `screen' program by Juergen Weigert,
4952 # Michael Schroeder, Oliver Laumann. The screen and
4953 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4954 # come from University of Wisconsin and may be older.
4955 # (screen: added <cnorm> on ANSI model -- esr)
4957 # 'screen' defines extensions to termcap. Some are used in its terminal
4959 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4960 # AX (bool) Does understand ANSI set default fg/bg color
4961 # (\E[39m / \E[49m).
4962 # S0 (str) Switch charset 'G0' to the specified charset.
4963 # E0 (str) Switch charset 'G0' back to standard charset.
4965 # tested with screen 3.09.08
4966 screen|VT 100/ANSI X3.64 virtual terminal,
4967 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4968 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
4969 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4970 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4971 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4972 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4973 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4974 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4975 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4976 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4977 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4978 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4979 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4980 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4981 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4982 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4983 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4984 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4985 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4986 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4987 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4988 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4989 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4990 S0=\E(%p1%c, use=ecma+color,
4991 # The bce and status-line entries are from screen 3.9.13 (and require some
4992 # changes to .screenrc).
4993 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4996 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4997 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4999 # ======================================================================
5000 # Entries for GNU Screen with 16 colors.
5001 # Those variations permit to benefit from 16 colors palette, and from
5002 # bold font and blink attribute separated from bright colors. But they
5003 # are less portable than the generic "screen" 8 color entries: Their
5004 # usage makes real sense only if the terminals you attach and reattach
5005 # do all support 16 color palette.
5007 screen-16color|GNU Screen with 16 colors,
5008 use=ibm+16color, use=screen,
5010 screen-16color-s|GNU Screen with 16 colors and status line,
5011 use=ibm+16color, use=screen-s,
5013 screen-16color-bce|GNU Screen with 16 colors and BCE,
5014 use=ibm+16color, use=screen-bce,
5016 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
5017 bce, use=ibm+16color, use=screen-s,
5019 # ======================================================================
5020 # Entries for GNU Screen 4.02 with --enable-colors256.
5022 screen-256color|GNU Screen with 256 colors,
5024 initc@, use=xterm+256color, use=screen,
5026 screen-256color-s|GNU Screen with 256 colors and status line,
5028 initc@, use=xterm+256color, use=screen-s,
5030 screen-256color-bce|GNU Screen with 256 colors and BCE,
5032 initc@, use=xterm+256color, use=screen-bce,
5034 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
5036 initc@, use=xterm+256color, use=screen-s,
5038 # ======================================================================
5040 # Read the fine manpage:
5041 # When screen tries to figure out a terminal name for
5042 # itself, it first looks for an entry named "screen.<term>",
5043 # where <term> is the contents of your $TERM variable. If
5044 # no such entry exists, screen tries "screen" (or "screen-w"
5045 # if the terminal is wide (132 cols or more)). If even this
5046 # entry cannot be found, "vt100" is used as a substitute.
5048 # Notwithstanding the manpage, screen uses its own notion of the termcap
5049 # and some keys from "screen.<term>" are ignored. Here is an entry which
5050 # covers those (tested with screen 4.00.02) -TD
5051 screen+fkeys|function-keys according to screen,
5052 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5055 # Here are a few customized entries which are useful -TD
5058 # (a) screen does not support invis.
5059 # (b) screen's implementation of bw is incorrect according to tack.
5060 # (c) screen appears to hardcode the strings for khome/kend, making it
5061 # necessary to override the "use=" clause's values (screen+fkeys).
5062 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5063 # which is NOT the same as the terminfo screen.<term>.
5064 # (e) when screen finds one of these customized entries, it sets $TERM to
5065 # match. Hence, no "screen.xterm" entry is provided, since that would
5066 # create heartburn for people running remote xterm's.
5068 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5069 # since the default translations override the built-in keycode
5070 # translation. They are suppressed here to show what is tested by tack.
5071 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5073 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5074 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5075 E3@, use=screen+fkeys, use=xterm-new,
5076 # xterm-r6 does not really support khome/kend unless it is propped up by
5077 # the translations resource.
5078 screen.xterm-r6|screen customized for X11R6 xterm,
5079 bw, use=screen+fkeys, use=xterm-r6,
5080 # Color applications running in screen and TeraTerm do not play well together
5081 # on Solaris because Sun's curses implementation gets confused.
5082 screen.teraterm|disable ncv in teraterm,
5084 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5085 use=screen+fkeys, use=screen,
5087 screen.rxvt|screen in rxvt,
5089 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5090 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5091 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5092 screen.Eterm|screen in Eterm,
5093 use=screen+fkeys, use=Eterm,
5094 screen.mrxvt|screen in mrxvt,
5095 use=screen+fkeys, use=mrxvt,
5096 screen.vte|screen in any VTE-based terminal,
5097 use=screen+fkeys, use=vte,
5098 screen.gnome|screen in GNOME Terminal,
5099 use=screen+fkeys, use=gnome,
5100 screen.konsole|screen in KDE console window,
5101 use=screen+fkeys, use=konsole,
5102 # fix the backspace key
5103 screen.linux|screen in linux console,
5105 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5106 screen.mlterm|screen in mlterm,
5107 use=screen+fkeys, use=mlterm,
5109 # The default "screen" entry is reasonably portable, but not optimal for the
5110 # most widely-used terminal emulators. The "bce" capability is supported in
5111 # screen since 3.9.13, and when used, will require fewer characters to be sent
5112 # to the terminal for updates.
5114 # If you are using only terminals which support bce, then you can use this
5115 # feature in your screen configuration.
5117 # Adding these lines to your ".screenrc" file will allow using these customized
5122 screen-bce.xterm-new|screen optimized for modern xterm,
5124 ech@, use=screen.xterm-new,
5125 screen-bce.rxvt|screen optimized for rxvt,
5127 ech@, use=screen.rxvt,
5128 screen-bce.Eterm|screen optimized for Eterm,
5130 ech@, use=screen.Eterm,
5131 screen-bce.mrxvt|screen optimized for mrxvt,
5133 ech@, use=screen.mrxvt,
5134 screen-bce.gnome|screen optimized for GNOME-Terminal,
5136 ech@, use=screen.gnome,
5137 screen-bce.konsole|screen optimized for KDE console window,
5139 ech@, use=screen.konsole,
5140 screen-bce.linux|screen optimized for linux console,
5142 ech@, use=screen.linux,
5143 screen-bce.mlterm|screen optimized for mlterm,
5145 ech@, use=screen.mlterm,
5147 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5148 cols#132, use=screen,
5150 screen2|old VT 100/ANSI X3.64 virtual terminal,
5151 cols#80, it#8, lines#24,
5152 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5153 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5154 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5155 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5156 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5157 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5158 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5159 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5160 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5161 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5162 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5163 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5164 screen3|older VT 100/ANSI X3.64 virtual terminal,
5166 cols#80, it#8, lines#24,
5167 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5168 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5169 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5170 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5171 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5172 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5173 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5174 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5175 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5176 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5177 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5178 smul=\E[4m, tbc=\E[3g,
5180 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5181 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5182 # been maintained until recently by the National Center for Supercomputer
5183 # Applications, and it is feature rich, stable and free. It can be downloaded
5184 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5185 # xterm+sl, and the docs at NCSA. It works well.
5187 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5188 # The terminal options should be set as follows:
5189 # Xterm sequences ON
5190 # use VT wrap mode ON
5191 # use Emacs arrow keys OFF
5192 # CTRL-COMND is Emacs meta ON
5194 # answerback string: "ncsa-vt220-8"
5195 # setup keys: all disabled
5197 # Application mode is not used.
5199 # Other special mappings:
5206 # PAGEDOWN Next Screen
5208 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5211 # The status-line manipulation is a mapping of the xterm-compatible control
5212 # sequences for setting the window-title. So you must use tsl and fsl in
5213 # pairs, since the latter ends the string that is loaded to the window-title.
5214 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5215 am, km, mir, msgr, xenl,
5216 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5217 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5218 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5219 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5220 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5221 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5222 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5223 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
5224 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5225 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5227 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5228 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5229 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
5230 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
5231 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
5232 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
5233 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
5234 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
5235 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
5236 rmso=\E[27m, rmul=\E[24m,
5237 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
5238 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5239 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
5240 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5241 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
5242 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5243 use=ncsa-m, use=klone+color,
5244 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5246 dsl@, fsl@, tsl@, use=ncsa,
5247 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5249 dsl@, fsl@, tsl@, use=ncsa-m,
5251 # The documented function-key mapping refers to the Apple Extended Keyboard
5252 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
5253 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5254 # some keyboards and many applications require these as F1-F4.
5256 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
5257 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5258 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5259 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
5260 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
5261 kf8=\E[19~, kf9=\E[20~, use=ncsa,
5263 #### Pilot Pro Palm-Top
5265 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
5266 # http://www.ai/~iang/TGssh/
5267 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
5270 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
5271 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
5272 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
5275 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
5276 # These entries are for the Embeddable Linux Kernel System (ELKS)
5277 # project - an heavily stripped down Linux to be run on 16 bit
5278 # boxes or, eventually, to be used in embedded systems - and have been
5279 # adapted from the stock ELKS termcap. The project itself looks stalled,
5280 # and the latest improvements I know of date back to March 2000.
5282 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
5283 # as an added bonus, this deals with all the capabilities common to
5284 # both VT52 and ANSI (or, eventually, "special") modes.
5286 elks-glasstty|ELKS glass-TTY capabilities,
5288 cols#80, it#8, lines#25,
5289 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
5292 elks-vt52|ELKS vt52 console,
5293 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
5294 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
5295 home=\EH, use=elks-glasstty,
5297 elks-ansi|ELKS ANSI console,
5298 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5299 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5300 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5302 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
5303 # instead of VT52, but the "elks" entry still refers to the latter.
5305 elks|default ELKS console,
5308 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
5309 # one but in screen size
5311 sibo|ELKS SIBO console,
5312 cols#61, it#8, lines#20, use=elks-vt52,
5314 ######## COMMERCIAL WORKSTATION CONSOLES
5320 # This is from the OSF/1 Release 1.0 termcap file
5321 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
5324 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5325 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5326 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
5327 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
5328 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5333 # :is1: resets scrolling region in case a previous user had used "tset vt100"
5334 oldsun|Sun Microsystems Workstation console,
5335 OTbs, am, km, mir, msgr,
5336 cols#80, it#8, lines#34,
5337 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
5338 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5339 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5340 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5341 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5342 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
5343 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5344 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
5345 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
5346 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
5347 sun-il|Sun Microsystems console with working insert-line,
5350 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5351 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5352 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5353 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5354 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5355 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
5356 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
5357 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
5358 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
5359 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
5360 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
5361 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
5362 smso=\E[7m, u8=\E[1t, u9=\E[11t,
5363 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
5364 # flake out on the last line. Unfortunately, without them the terminal has no
5366 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
5367 il@, il1@, use=sun-il,
5368 # If you are using an SS5, change the sun definition to use sun-ss5.
5369 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
5372 sun+sl|Sun Workstation window status line,
5374 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
5376 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
5377 sun-s|Sun Microsystems Workstation window with status line,
5379 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5380 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
5382 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5383 sun-48|Sun 48-line window,
5384 cols#80, lines#48, use=sun,
5385 sun-34|Sun 34-line window,
5386 cols#80, lines#34, use=sun,
5387 sun-24|Sun 24-line window,
5388 cols#80, lines#24, use=sun,
5389 sun-17|Sun 17-line window,
5390 cols#80, lines#17, use=sun,
5391 sun-12|Sun 12-line window,
5392 cols#80, lines#12, use=sun,
5393 sun-1|Sun 1-line window for sysline,
5396 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5397 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
5398 ich1@, rmir@, smir@, use=sun,
5399 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
5401 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5402 sun-type4|Sun Workstation console with type 4 keyboard,
5403 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
5404 kcuu1=\E[215z, use=sun-il,
5406 # Most of the current references to sun-color are from users wondering why this
5407 # is the default on install. Details from reading the wscons manpage, adding
5408 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
5409 # when those were added -TD (2005-05-28)
5411 # According to wscons manpage, color is supported only on IA systems.
5412 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
5413 # does not list these. It also sets ncv#3, however that corresponds to
5414 # underline and standout.
5416 # Since the documentation and terminfo do not agree, see also current code at
5417 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
5419 # That (actually a different driver which "supports" sun-color) also supports
5426 # It supports bold, but not underline -TD (2009-09-19)
5427 sun-color|Sun Microsystems Workstation console with color support (IA systems),
5428 colors#8, ncv#3, pairs#64,
5429 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
5430 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
5431 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5432 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5433 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5434 sgr=\E[0%?%p1;1%;%?%p3%;7%;m, sgr0=\E[m, smso=\E[1m,
5440 # (wsiris: this had extension capabilities
5441 # :HS=\E7F2:HE=\E7F7:\
5442 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
5443 # See the note on Iris extensions near the end of this file.
5444 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
5445 # <flash> from BRL -- esr)
5446 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
5447 OTbs, OTnc, OTpt, am,
5448 OTkn#3, cols#80, it#8, lines#40,
5449 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
5450 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5451 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
5452 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
5453 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
5454 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
5455 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
5456 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
5461 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
5462 # environment). Note: these have nothing to do with Sony's News workstation
5466 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
5467 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
5468 psterm|psterm-basic|NeWS psterm-80x34,
5469 OTbs, am, hs, km, ul,
5470 cols#80, it#8, lines#34,
5471 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
5472 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
5473 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
5474 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
5475 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
5476 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
5477 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
5479 psterm-96x48|NeWS psterm 96x48,
5480 cols#96, lines#48, use=psterm,
5481 psterm-90x28|NeWS psterm 90x28,
5482 cols#90, lines#28, use=psterm,
5483 psterm-80x24|NeWS psterm 80x24,
5484 cols#80, lines#24, use=psterm,
5485 # This is a faster termcap for psterm. Warning: if you use this termcap,
5486 # some control characters you type will do strange things to the screen.
5487 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5488 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5489 OTbs, am, hs, km, ul,
5490 cols#80, it#8, lines#34,
5491 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5492 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5493 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5494 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5495 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5496 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5497 smso=^Oo, smul=^Ou, tsl=^Ol,
5501 # Use `glasstty' for the Workspace application
5504 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5507 cols#80, it#8, lines#24,
5508 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5509 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5510 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5511 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5512 nextshell|NeXT Shell application,
5515 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5518 #### Sony NEWS workstations
5521 # (news-unk: this had :KB=news: -- esr)
5522 news-unk|SONY NEWS vt100 emulator common entry,
5523 OTbs, OTpt, am, xenl,
5525 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5526 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5527 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5528 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5529 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5530 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5531 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5532 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5533 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5534 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5535 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5536 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5538 # (news-29: this had :TY=ascii: --esr)
5540 lines#29, use=news-unk,
5541 # (news-29-euc: this had :TY=euc: --esr)
5544 # (news-29-sjis: this had :TY=sjis: --esr)
5548 # (news-33: this had :TY=ascii: --esr)
5550 lines#33, use=news-unk,
5551 # (news-33-euc: this had :TY=euc: --esr)
5554 # (news-33-sjis: this had :TY=sjis: --esr)
5558 # (news-42: this had :TY=ascii: --esr)
5560 lines#42, use=news-unk,
5561 # (news-42-euc: this had :TY=euc: --esr)
5564 # (news-42-sjis: this had :TY=sjis: --esr)
5568 # NEWS-OS old termcap entry
5570 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
5571 news-old-unk|SONY NEWS vt100 emulator common entry,
5572 OTbs, OTpt, am, xenl,
5574 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5575 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5576 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5577 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5578 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5579 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5580 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5581 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5582 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5584 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5585 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5588 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5591 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5592 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5594 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5597 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
5598 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5601 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5604 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5605 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5608 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5611 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5612 # also the alias vt100-bm.
5613 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5616 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5619 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5620 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5623 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5626 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5627 news28|sony vt100 emulator 28 lines,
5630 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5633 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5634 news29|news28-a|sony vt100 emulator 29 lines,
5636 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5639 # (news511: this had :TY=sjis: --esr)
5640 nwp511|nwp-511|nwp-511 vt100,
5641 OTbs, OTpt, am, xenl,
5643 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5644 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5645 ed=\E[J$<30/>, el=\E[K$<3/>,
5646 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5647 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5648 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5649 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5650 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5651 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5652 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5653 # (news517: this had :TY=sjis:. --esr)
5654 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5657 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5658 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5659 tsl=\E[1$}\E[;%df, use=vt200,
5660 # (news517-w: this had :TY=sjis:. --esr)
5661 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5664 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5665 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5666 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5667 tsl=\E[1$}\E[;%df, use=vt200,
5669 #### Common Desktop Environment
5672 # This ships with Sun's CDE in Solaris 2.5
5673 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5674 dtterm|CDE desktop terminal,
5675 am, mir, msgr, xenl, xon,
5676 cols#80, it#8, lines#24, lm#0, ncv@,
5677 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5678 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5679 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5680 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5681 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5682 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5683 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5684 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5685 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5686 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5687 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5688 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5689 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5690 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5691 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5692 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5693 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5694 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5695 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5696 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5698 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5699 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5700 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5702 #### Non-Unix Consoles
5705 #### EMX termcap.dat compatibility modes
5707 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5708 # no_color_video to inform the application that standout(1), underline(2)
5709 # reverse(4) and invisible(64) don't work with color.
5710 emx-base|DOS special keys,
5713 bel=^G, use=ansi.sys,
5715 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5716 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5717 # names longer than 14 characters, the nominal maximum).
5719 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5720 ansi-emx|ANSI.SYS color,
5721 am, bce, eo, mir, msgr, xon,
5722 colors#8, cols#80, it#8, lines#25, pairs#64,
5723 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5724 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5725 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5726 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5727 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5728 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5729 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5730 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5731 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5732 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5733 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5734 u9=\E[c, use=emx-base,
5735 # nice colors for Emacs (white on blue, mode line white on cyan)
5736 ansi-color-2-emx|ANSI.SYS color 2,
5737 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5738 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5739 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5740 smul=\E[1;36;44m, use=ansi-emx,
5741 # nice colors for Emacs (white on black, mode line black on cyan)
5742 ansi-color-3-emx|ANSI.SYS color 3,
5743 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5744 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5745 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5746 smul=\E[0;36;40m, use=ansi-emx,
5747 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5749 cols#80, it#8, lines#24,
5750 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5751 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5752 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5753 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5754 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5755 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5758 # Use this for cygwin32 (tested with beta 19.1)
5759 # underline is colored bright magenta
5760 # shifted kf1-kf12 are kf11-kf22
5761 cygwinB19|ansi emulation for cygwin32,
5762 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5763 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5764 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5765 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5766 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5767 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5768 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5771 # Use this for cygwin (tested with version 1.1.0).
5772 # I've combined pcansi and linux. Some values of course were different and
5773 # I've indicated which of these were and which I used.
5774 # Cheers, earnie_boyd@yahoo.com
5775 # several changes based on running with tack and comparing with older entry -TD
5776 # more changes from csw:
5778 # remove eo [erase overstrike with blank]
5779 # change clear was \E[H\E[J now \E[2J (faster?)
5782 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5784 # add cub [cursor back param]
5785 # add cuf [cursor forward param]
5786 # add cuu [cursor up param]
5787 # add cud [cursor down param]
5788 # add hs [has status line]
5789 # add fsl [return from status line]
5790 # add tsl [go to status line]
5791 # add smacs [Start alt charset] (not sure if this works)
5792 # add rmacs [End alt charset] (ditto)
5793 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5794 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5795 # add kb2 [center of keypad]
5796 # add u8 [user string 8] \E[?6c
5797 # add el [clear to end of line] \E[K
5799 # cnorm [make cursor normal] not implemented
5800 # flash [flash] not implemented
5801 # blink [blink] not implemented very usefully in cygwin? \E[5m
5802 # dim [dim] not implemented very usefully in cygwin? \E[2m
5803 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5804 # kNXT [shifted next key] not implemented
5805 # kPRV [shifted prev key] not implemented
5806 # khome [home key] really is \E[1~ NOT \E[H
5807 # tbc [clear tab stops] not implemented
5808 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5809 # smpch [Start PC charset] is \E[11m, same as smacs
5810 # rmpch [End PC charset] is \E[10m, same as rmacs
5811 # mir [move in insert mode] fails in tack?
5812 # bce [back color erase] causes problems with change background color?
5813 # cvvis [make cursor very visible] causes a stackdump when testing with
5814 # testcurs using the output option? \E[?25h\E[?8c
5815 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5816 # ech [erase characters param] broken \E[%p1%dX
5817 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5820 # Remove cbt since it does not work in current cygwin
5821 # Add 'mir' and 'in' flags based on tack
5822 cygwin|ansi emulation for Cygwin,
5823 am, hs, mir, msgr, xon,
5824 colors#8, it#8, pairs#64,
5825 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5826 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5827 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5828 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5829 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5830 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5831 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5832 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5833 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5834 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5835 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5836 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5837 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5838 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5839 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5840 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5841 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5842 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5843 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5844 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5845 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5846 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5847 vpa=\E[%i%p1%dd, use=vt102+enq,
5849 # I've supplied this so that you can help test new values and add other
5850 # features. Cheers, earnie_boyd@yahoo.com.
5852 # Some features are from pcansi. The op value is from linux. Function-keys
5853 # are from linux. These have been tested not to cause problems. xenl was in
5854 # this list, but DOES cause problems so it has been removed
5855 cygwinDBG|Debug Version for Cygwin,
5856 am, eo, mir, msgr, xon,
5857 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5858 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5859 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5860 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5861 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5862 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5863 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5864 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5865 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5866 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5867 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5868 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5869 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5870 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5871 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5872 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5873 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5874 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5875 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5876 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5877 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5878 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5879 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5880 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5881 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5884 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5885 # encodings used by other x86 environments. All others are invented for DJGPP.
5886 # Oddly enough, while several combinations of modifiers are tabulated, there is
5887 # none for shifted cursor keys.
5939 # Ctrl-Delete \E[43~
5940 # Ctrl-Down Arrow \E[38~
5943 # Ctrl-Insert \E[42~
5944 # Ctrl-Left Arrow \E[39~
5945 # Ctrl-Page Down \E[46~
5946 # Ctrl-Page Up \E[45~
5947 # Ctrl-Right Arrow \E[40~
5948 # Ctrl-Up Arrow \E[37~
5964 # Alt-Down Arrow \E[60~
5968 # Alt-Left Arrow \E[61~
5969 # Alt-Page Down \E[68~
5970 # Alt-Page Up \E[67~
5971 # Alt-Right Arrow \E[62~
5972 # Alt-Up Arrow \E[59~
6001 djgpp|ansi emulation for DJGPP alpha,
6002 am, bce, msgr, xhp, xon, xt,
6003 colors#8, it#8, pairs#64,
6004 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6005 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6006 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
6007 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6008 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6009 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6010 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6011 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6012 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6013 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
6014 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6015 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
6016 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6017 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6018 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
6019 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
6020 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6021 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
6022 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6024 djgpp203|Entry for DJGPP 2.03,
6026 cols#80, it#8, lines#25,
6027 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
6030 djgpp204|Entry for DJGPP 2.04,
6032 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
6033 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6034 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
6035 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6036 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6037 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
6038 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6039 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6040 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
6041 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6042 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
6043 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6044 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6045 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
6046 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6047 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6049 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6050 # buggy. Another odd bug appears when displaying "~" in alternate character
6051 # set (the emulator spits out error messages). Compare with att6386 -TD
6052 uwin|U/Win 3.2 console,
6053 am, eo, in, msgr, xenl, xon,
6054 colors#8, it#8, ncv#58, pairs#64,
6055 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6056 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6057 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6058 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6059 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6060 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6061 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6062 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6063 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6064 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6065 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6066 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6067 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6068 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6069 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6070 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6072 # This entry fits the Windows NT console when the _POSIX_TERM environment
6073 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6074 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6075 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6076 # systems is not, and (surprise!) they match very well.
6078 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6079 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6080 # are the installation instructions a pile of mind-numbing bureaucratese,
6081 # but the termcap entry is actually broken and unusable as given; the :do:
6082 # capability is misspelled "d".
6084 # To use this, you need to a bunch of environment variables:
6086 # SET _POSIX_TERM=on
6088 # SET TERMCAP=location of termcap file in POSIX file format
6089 # which is case-sensitive.
6090 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6093 # Important note: setting the TMP environment variable in POSIX style renders
6094 # it incompatible with a lot of other applications, including Visual C++. So
6095 # you should have a separate command window just for vi. All the other
6096 # variables may be permanently set in the Control Panel\System applet.
6098 # You can find out more about the restrictions of this facility at
6099 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6101 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6102 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6104 cols#80, it#8, lines#25,
6105 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6106 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6107 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6108 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6109 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6110 # From: jew@venus.sunquest.com
6111 # Date: 19 Feb 93 23:41:07 GMT
6112 # Here's a combination of ansi and vt100 termcap
6113 # entries that works nearly perfectly for me
6114 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6115 pcmw|PC running Microsoft Works,
6117 cols#80, it#8, lines#24, vt#3,
6118 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6119 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6120 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6121 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6122 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6123 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6124 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6125 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6126 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6127 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6128 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6131 # From: Federico Bianchi
6132 # This is the entry for the OpenNT terminal.
6133 # The ntconsole name is for backward compatability.
6134 # This is for OpenNT 2.0 and later.
6135 # Later OpenNT was renamed to Interix.
6137 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6138 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6139 # the documentation dates from 1.9.9e) -TD
6141 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6143 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6144 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6145 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6146 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6147 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6148 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6149 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6150 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6151 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6152 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6153 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6154 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6155 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6156 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6157 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6158 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6159 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6160 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6161 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6162 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6163 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6164 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6165 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6166 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6167 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6168 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6169 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6170 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6172 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6173 lines#35, use=opennt,
6175 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6176 lines#50, use=opennt,
6178 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6179 lines#60, use=opennt,
6181 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6182 lines#100, use=opennt,
6184 # OpenNT wide terminals
6185 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6186 cols#125, use=opennt,
6188 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6189 lines#35, use=opennt-w,
6191 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6192 lines#50, use=opennt-w,
6194 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6195 lines#60, use=opennt-w,
6197 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6198 cols#132, use=opennt,
6200 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6201 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6202 rmcup@, smcup@, use=opennt,
6204 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6205 lines#35, use=opennt-nti,
6207 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6208 lines#50, use=opennt-nti,
6210 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6211 lines#60, use=opennt-nti,
6213 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6214 lines#100, use=opennt-nti,
6216 ######## COMMON TERMINAL TYPES
6218 # This section describes terminal classes and maker brands that are still
6219 # quite common, but have proprietary command sets not blessed by ANSI.
6224 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
6225 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
6226 # Acer has a web site at http://www.acer.com.
6228 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
6229 # His comments suggest they were shipped with the system.
6232 # (altos2: had extension capabilities
6233 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6234 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6235 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6236 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6237 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6238 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
6239 # :HL=^AP\r:SP=\E[i:\
6240 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
6241 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
6242 # Comparison with the k* capabilities makes it obvious that the c* things are
6243 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
6244 # :sr: was given as a boolean-- esr)
6245 altos2|alt2|altos-2|altos II,
6246 cols#80, it#8, lines#24, xmc#0,
6247 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
6248 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
6249 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
6250 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
6251 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
6252 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
6253 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
6254 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6255 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6256 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6257 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6258 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
6259 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
6260 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
6261 # (altos3: had extension capabilities
6262 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6263 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6264 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6265 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6266 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6267 # :HL=^AP\r:SP=\E[i:\
6268 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
6269 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
6270 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6271 altos4|alt4|altos-4|altos IV,
6273 # (altos7: had extension capabilities:
6274 # :GG#0:GI=\EH8:GF=\EH7:\
6275 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6276 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6277 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6278 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6279 # Comparison with the k* capabilities makes it obvious that the c* things are
6280 # shift keys. I have renamed them to keys 32 and up accordingly. I have
6281 # also made this entry relative to adm12 in order to give it an <sgr>. The
6282 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
6283 altos7|alt7|altos VII,
6285 cols#80, lines#24, xmc#0,
6286 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
6287 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6288 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6289 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
6291 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
6292 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
6293 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
6294 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6295 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6296 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6297 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6298 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
6299 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
6300 rmir=\Er, smir=\Eq, use=adm+sgr,
6301 altos7pc|alt7pc|altos PC VII,
6302 kend=\ET, use=altos7,
6304 #### Hewlett-Packard (hp)
6307 # 8000 Foothills Blvd
6308 # Roseville, CA 95747
6309 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
6310 # 1-(800)-633-3600 (General customer support)
6313 # As of March 1998, HP no longer has any terminals in production.
6314 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
6315 # supported (they still have parts). So are the 2392a and 2394a.
6316 # See the WORKSTATION CONSOLES section for the 700s.
6319 # Generic HP terminal - this should (hopefully) work on any HP terminal.
6320 hpgeneric|hp|hewlett-packard generic terminal,
6321 OTbs, OTpt, am, da, db, mir, xhp,
6322 cols#80, lines#24, lm#0, vt#6,
6323 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6324 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
6325 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6326 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
6327 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6330 hp110|hewlett-packard model 110 portable,
6331 lines#16, use=hpgeneric,
6333 hp+pfk+cr|hp function keys with CR,
6334 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
6335 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
6337 hp+pfk-cr|hp function keys w/o CR,
6338 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6341 # The hp2621s use the same keys for the arrows and function keys,
6342 # but not separate escape sequences. These definitions allow the
6343 # user to use those keys as arrow keys rather than as function
6345 hp+pfk+arrows|hp alternate arrow definitions,
6346 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
6347 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
6348 kll=\Eq\r, kri=\Es\r,
6350 hp+arrows|hp arrow definitions,
6351 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6352 kind=\ES, kll=\EF, kri=\ET,
6354 # Generic stuff from the HP 262x series
6356 hp262x|HP 262x terminals,
6358 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
6359 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6360 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6361 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
6362 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6363 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
6364 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
6366 # Note: no <home> on HPs since that homes to top of memory, not screen.
6367 # Due to severe 2621 braindamage, the only way to get the arrow keys to
6368 # transmit anything at all is to turn on the function key labels
6369 # with <smkx>, and even then the user has to hold down shift!
6370 # The default 2621 turns off the labels except when it has to to
6371 # enable the function keys. If your installation prefers labels
6372 # on all the time, or off all the time (at the "expense" of the
6373 # function keys), use 2621-nl or 2621-wl.
6375 # Note: there are newer ROMs for 2621's that allow you to set
6376 # strap A so the regular arrow keys xmit \EA, etc, as with the
6377 # 2645. However, even with this strap set, the terminal stops
6378 # xmitting if you reset it, until you unset and reset the strap!
6379 # Since there is no way to set/unset the strap with an escape
6380 # sequence, we don't use it in the default.
6381 # If you like, you can use 2621-ba (brain-damaged arrow keys).
6382 hp2621-ba|2621 w/new rom and strap A set,
6383 rmkx@, smkx@, use=hp+arrows, use=hp2621,
6385 # hp2621 with function labels. Most of the time they are off,
6386 # but inside vi, the function key labels appear. You have to
6387 # hold down shift to get them to xmit.
6388 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
6389 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6393 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
6394 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
6395 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
6396 use=hp+pfk+cr, use=hpgeneric,
6398 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6399 hp2621p|hp 2621 with printer,
6400 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6402 hp2621p-a|hp2621p with fn as arrows,
6403 use=hp+pfk+arrows, use=hp2621p,
6405 # hp2621 with k45 keyboard
6406 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
6407 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
6408 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6410 # 2621 using all 48 lines of memory, only 24 visible at any time.
6411 hp2621-48|48 line 2621,
6413 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
6416 # 2621 with no labels ever. Also prevents vi delays on escape.
6417 hp2621-nl|hp 2621 with no labels,
6418 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
6421 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
6424 hp2621-nt|hp 2621 w/no tabs,
6427 # Hp 2624 B with 4 or 10 pages of memory.
6429 # Some assumptions are made with this entry. These settings are
6430 # NOT set up by the initialization strings.
6432 # Port Configuration
6437 # Terminal Configuration
6443 # Note: the 2624 DOES have a true <home>, believe it or not!
6445 # The 2624 has an "error line" to which messages can be sent.
6446 # This is CLOSE to what is expected for a "status line". However,
6447 # after a message is sent to the "error line", the next carriage
6448 # return is EATEN and the "error line" is turned back off again!
6449 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
6451 # This entry supports emacs (and any other program that uses raw
6452 # mode) at 4800 baud and less. I couldn't get the padding right
6455 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
6456 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
6459 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
6460 use=hp+labels, use=scrhp,
6462 # This hp2626 entry does not use any of the fancy windowing stuff
6465 # Indeed, terminfo does not yet handle such stuff. Since changing
6466 # any window clears memory, it is probably not possible to use
6467 # this for screen opt.
6469 # ed is incredibly slow most of the time - I am guessing at the
6470 # exact padding. Since the terminal uses xoff/xon this is intended
6471 # only for cost computation, so that the terminal will prefer el
6472 # or even dl1 which is probably faster!
6474 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
6475 # extra slow on the last line of the window.
6477 # The padding probably should be changed.
6479 hp2626|hp2626a|hp2626p|hp 2626,
6482 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6483 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
6484 use=hp+labels, use=scrhp,
6486 # This entry is for sysline. It allocates a 23 line window with
6487 # a 115 line workspace for regular use, and a 1 line window for
6490 # This assumes port 2 is being used.
6491 # Turn off horizontal line, Create ws #1 with 115 lines,
6492 # Create ws #2 with 1 line, Create window #1 lines 1-23,
6493 # Create window #2 lines 24-24, Attach cursor to workspace #1.
6494 # Note that this clears the tabs so it must be done by tset before
6497 hp2626-s|hp 2626 using only 23 lines,
6500 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6501 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6502 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6503 # Force terminal back to 24 lines after being 23.
6504 hp2626-ns|hp 2626 using all 24 lines,
6505 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6507 # Various entries useful for small windows on 2626.
6508 hp2626-12|hewlett-packard 2626 12 lines,
6509 lines#12, use=hp2626,
6510 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6511 cols#40, lines#12, use=hp2626,
6512 hp2626-x40|hewlett-packard 2626 40 columns,
6513 cols#40, use=hp2626,
6514 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6515 lines#11, use=hp2626-s,
6518 # hp2627 color tubes from University of Wisconsin
6520 hp2627a-rev|hp 2627 with reverse video colors,
6521 cr=^M, cud1=^J, ht=^I, ind=^J,
6522 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6523 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6524 smul=\E&dD\E&v1S, use=hp2621-nl,
6525 hp2627a|hp 2627 color terminal with no labels,
6526 cr=^M, cud1=^J, ht=^I, ind=^J,
6527 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6528 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6529 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6531 hp2627c|hp 2627 color (cyan) terminal with no labels,
6532 cr=^M, cud1=^J, ht=^I, ind=^J,
6533 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6534 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6536 # hp2640a doesn't have the Y cursor addressing feature, and C is
6537 # memory relative instead of screen relative, as we need.
6540 cup@, rmkx@, smkx@, use=hp2645,
6542 hp2640b|hp2644a|hp 264x series,
6543 rmkx@, smkx@, use=hp2645,
6545 # (hp2641a: removed unknown :gu: -- esr)
6546 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6547 am, da, db, mir, xhp,
6549 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6550 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6551 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6552 if=/usr/share/tabset/std, il1=\EL, ind=^J,
6553 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6554 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6557 # This terminal should be used at 4800 baud or less. It needs padding for
6558 # plain characters at 9600, I guessed at an appropriate cr delay. It really
6559 # wants ^E/^F handshaking, but that doesn't work well even if you write
6560 # software to support it.
6561 hp2645|hp45|HP 2645 series,
6563 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6564 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6565 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6566 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6568 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6569 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6570 # You should use this terminal at 4800 baud or less.
6571 hp2648|hp2648a|HP 2648a graphics terminal,
6572 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6573 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6575 # The HP 150 terminal is a fairly vanilla HP terminal, with the
6576 # clreol standout problem. It also has graphics capabilities and
6577 # a touch screen, which we don't describe here.
6578 hp150|hewlett packard Model 150,
6581 # HP 2382a terminals, "the little ones." They don't have any
6582 # alternate character set support and sending out ^N/^O will
6583 # leave the screen blank.
6584 hp2382a|hp2382|hewlett packard 2382a,
6588 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6590 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6591 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6593 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6594 use=hp+pfk+arrows, use=hp2621-fl,
6596 # newer hewlett packard terminals
6598 newhpkeyboard|generic entry for HP extended keyboard,
6599 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6600 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6601 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6602 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6605 newhp|generic entry for new hewlett packard terminals,
6606 am, bw, mir, xhp, xon,
6607 cols#80, lines#24, pb#4800,
6608 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6609 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6610 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6611 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6612 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6613 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6614 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6615 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6616 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6617 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6618 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6619 tbc=\E3, use=newhpkeyboard,
6621 memhp|memory relative addressing for new HP ttys,
6623 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6624 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6625 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6626 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6628 scrhp|screen relative addressing for new HP ttys,
6629 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6630 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6631 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6632 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6633 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6635 # (hp+labels: added label values from a BRL termcap -- esr)
6636 hp+labels|"standard" label info for new HP ttys,
6638 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6639 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6640 rmln=\E&j@, smln=\E&jB,
6642 hp+printer|"standard" printer info for HP ttys,
6643 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6646 # The new hp2621b is kind of a cross between the old 2621 and the
6647 # new 262x series of machines. It has dip-switched options.
6648 # The firmware has a bug in it such that if you give it a null
6649 # length label, the following character is eaten!
6650 hp2621b|hp 2621b with old style keyboard,
6651 lh#1, lm#48, lw#8, nlab#8,
6652 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6653 kind=\ET, kll=\EF, kri=\ES,
6654 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6655 smln=\E&jB, use=hp2621,
6657 hp2621b-p|hp 2621b with printer,
6658 use=hp+printer, use=hp2621b,
6660 # hp2621b - new 2621b with new extended keyboard
6661 # these are closer to the new 26xx series than the other 2621b
6662 hp2621b-kx|hp 2621b with extended keyboard,
6663 use=newhpkeyboard, use=hp2621b,
6665 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6666 use=hp+printer, use=hp2621b-kx,
6668 # Some assumptions are made in the following entries.
6669 # These settings are NOT set up by the initialization strings.
6671 # Port Configuration
6672 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6674 # Terminal Configuration
6675 # InhHndShk(G)=Yes InhDC2(H)=Yes
6676 # XmitFnctn(A)=No InhEolWrp=No
6679 # Hp 2622a & hp2623a display and graphics terminals
6681 hp2622|hp2622a|hp 2622,
6684 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
6686 # The 2623 is a 2622 with extra graphics hardware.
6687 hp2623|hp2623a|hp 2623,
6690 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6691 use=hp+printer, use=hp2624,
6693 # The hewlett packard B can have an optional extra 6 pages of memory.
6694 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6697 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6698 lm#240, use=hp2624b-p,
6700 # Color manipulations for HP terminals
6701 hp+color|hp with colors,
6703 colors#16, ncv#17, pairs#7,
6704 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6705 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6706 op=\E&v0S, scp=\E&v%p1%dS,
6708 # <is2> sets the screen to be 80 columns wide
6709 hp2397a|hp2397|hewlett packard 2397A color terminal,
6710 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6712 # HP 700/44 Setup parameters:
6713 # Terminal Mode HP-PCterm
6714 # Inhibit Auto Wrap NO
6715 # Status Line Host Writable
6716 # PC Character Set YES
6717 # Twenty-Five Line Mode YES
6718 # XON/XOFF @128 or 64 (sc)
6719 # Keycode Mode NO or YES (sc)
6720 # Backspace Key BS or BS/DEL
6722 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6723 # \E\\? does not turn off keycode mode
6724 # <smsc> sets alternate start/stop; keycode on
6725 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6728 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6729 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6730 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6731 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6732 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6734 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6735 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6736 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6737 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6738 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6739 kpp=\E[5~, rmam=\E[?7l,
6740 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6741 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6742 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6743 smul=\E[4m, xoffc=g, xonc=e,
6745 # (hp2392: copied <rmir> here from hpex -- esr)
6748 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6749 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6750 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6751 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6754 hpsub|hp terminals -- capability subset,
6755 am, da, db, mir, xhp, xon,
6757 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6758 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6759 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6760 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6761 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6762 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6765 # May be used for most 24 x 80 hp terminals,
6766 # but has no padding added, so may allow runover in some terminals at high
6767 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6768 # hp98x5 terminal emulators or hp98x6 consoles.
6769 # Adds xy-cursor addressing, vertical cursor addressing, home,
6770 # last line, and underline capabilities.
6772 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6773 # moved <rmir> here from hpsub -- esr)
6774 hpex|hp extended capabilites,
6775 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6776 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6777 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6779 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6780 hp2|hpex2|hewlett-packard extended capabilities newer version,
6781 am, da, db, mir, xhp,
6782 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6783 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6784 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6785 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6786 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6787 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6788 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6789 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6790 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6791 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6792 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6793 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6794 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6795 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6796 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6797 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6798 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6799 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6802 # From: <ddavis@ic.berkeley.edu>
6803 hp236|hp236 internal terminal emulator,
6806 clear=\EF, cnorm=\EDE, cub1=^H,
6807 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6808 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6809 sgr0=\ECI, smso=\EBI,
6811 # This works on a hp300 console running Utah 4.3 BSD
6812 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6813 hp300h|HP Catseye console,
6814 OTbs, am, da, db, mir, xhp,
6815 cols#128, lines#51, lm#0, xmc#0,
6816 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6817 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6818 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6819 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6820 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6821 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6822 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6824 # From: Greg Couch <gregc@ernie.berkeley.edu>
6825 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6826 OTbs, am, da, db, mir, xhp,
6827 cols#128, it#8, lines#46, lm#0,
6828 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6829 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6830 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6831 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6832 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6833 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6834 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6835 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6836 tbc=\E3, vpa=\E&a%p1%dY,
6837 # HP 9845 desktop computer from BRL
6838 # (hp9845: removed unknown capability :gu: -- esr)
6840 OTbs, am, da, db, eo, mir, xhp,
6842 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6843 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6844 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
6845 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6846 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6847 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6848 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6849 hp98550|hp98550a|HP 9000 Series 300 color console,
6850 OTbs, am, da, db, mir, xhp,
6851 cols#128, it#8, lines#49, lm#0,
6852 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6853 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6854 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6855 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6856 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6857 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6858 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6859 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6860 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6861 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6862 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6863 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6864 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6865 # From: Victor Duchovni <vic@fine.princeton.edu>
6866 # (hp700-wy: removed obsolete ":nl=^J:";
6867 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6868 hp700-wy|HP700/41 emulating wyse30,
6869 OTbs, am, bw, mir, msgr,
6870 cols#80, it#8, lines#24, xmc#1,
6871 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6872 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6873 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6874 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6875 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6876 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6877 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6878 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6879 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6880 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6881 hp70092|hp70092a|hp70092A|HP 700/92,
6883 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6884 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6885 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6886 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6887 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6888 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6889 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6890 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6891 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6892 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6893 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6894 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6895 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6896 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6898 bobcat|sbobcat|HP 9000 model 300 console,
6899 am, da, db, mir, xhp,
6900 cols#128, it#8, lines#47, xmc#0,
6901 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6902 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6903 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6904 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6905 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6906 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6907 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6908 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6909 lines#94, use=gator,
6910 gator|HP 9000 model 237 emulating AAA,
6912 cols#128, it#8, lines#47,
6913 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6914 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6915 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6916 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6917 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6918 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6919 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6920 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6921 gator-52|HP 9000 model 237 emulating VT52,
6922 cols#128, lines#47, use=vt52,
6923 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6924 lines#94, use=gator-52,
6928 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6931 # Honeywell Bull terminal. Its cursor and function keys send single
6932 # control characters and it has standout/underline glitch. Most programs
6933 # do not like these features/bugs. Visual bell is realized by flashing the
6934 # "keyboard locked" LED.
6935 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6937 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6938 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6939 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6940 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6941 dku7003|Honeywell Bull DKU 7003 all features described,
6944 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6945 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6948 #### Lear-Siegler (adm)
6950 # These guys are long since out of the terminals business, but
6951 # in 1995 many current terminals still have an adm type as one of their
6952 # emulations (usually their stupidest, and usually labeled adm3, though
6953 # these `adm3' emulations normally have adm3a+ capabilities).
6955 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6956 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6957 # was being held to ground would trigger a send of the top line on the screen.
6958 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6959 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6960 # for clearing up this point.)
6962 adm1a|adm1|lsi adm1a,
6965 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6966 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6971 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6972 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6973 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6974 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6975 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6979 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6980 # The following ADM-3A switch settings are assumed for normal operation:
6981 # SPACE U/L_DISP CLR_SCRN 24_LINE
6982 # CUR_CTL LC_EN AUTO_NL FDX
6983 # Other switches may be set for operator convenience or communication
6984 # requirements. I recommend
6985 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6987 # Most of these terminals required an option ROM to support lower case display.
6988 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6989 # socket, you may be out of luck.
6991 # (adm3a: some capabilities merged in from BRl entry -- esr)
6995 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6996 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6997 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
7001 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
7004 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
7005 rmso=\EG, smso=\EG, use=adm3a+,
7006 # A lot of terminals other than adm11s use these. Wherever you see
7007 # use=adm+sgr with some of its capabilities disabled, try the
7008 # disabled ones. They may well work but not have been documented or
7009 # expressed in the using entry. We'd like to cook up an <sgr> but the
7010 # <rmacs>/<smacs> sequences of the using entries vary too much.
7011 adm+sgr|adm style highlight capabilities,
7012 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
7013 smso=\EG4, smul=\EG8,
7014 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
7015 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
7016 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
7017 # be ^Z, according to his entry.
7018 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
7019 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
7022 OTkn#8, cols#80, lines#24,
7023 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
7024 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7025 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
7026 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7027 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7028 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
7030 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
7031 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
7032 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
7033 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
7034 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
7035 # via BRL. That entry asserted <xmc#1>, but I've left that out because
7036 # neither earlier nor later ADMSs have it -- esr)
7038 # You will need to get into the supervisor setup before you can set
7039 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
7040 # see a lot more setup options.
7042 # While in supervisor setup you can also use following codes:
7044 # Ctrl-P Personality character selections (configure for example what
7045 # arrow keys send, if I recall correctly)
7046 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7047 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7048 # Ctrl-B Binary setup (probably not needed. I think that everything can
7049 # be set using normal setup)
7050 # Ctrl-A Answerback mode (enter answerback message)
7051 # Ctrl-U User friendly mode (normal setup)
7052 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7053 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7054 # Ctrl-R Reads both setup and functions keys from NVM.
7055 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7057 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7058 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7059 # bps works fine with hardware flow control.
7061 # The following null-modem cable should fix this and enable you to use
7062 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7063 # set ADM-12+ for DTR handshaking from supervisor setup.
7076 OTbs, OTpt, am, mir,
7077 OTug#1, cols#80, it#8, lines#24,
7078 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7079 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7080 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7081 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7082 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7083 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7084 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7086 # (adm20: removed obsolete ":kn#7:" -- esr)
7087 adm20|lear siegler adm20,
7089 cols#80, it#8, lines#24,
7090 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7091 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7092 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7093 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7095 adm21|lear siegler adm21,
7097 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
7098 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
7099 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
7101 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7102 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7103 # removed bogus-looking \200 from before <cup>. -- esr)
7107 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7108 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7109 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7110 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7111 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7112 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7113 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7114 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7115 # ADM 31 DIP Switches
7117 # This information comes from two versions of the manual for the
7118 # Lear-Siegler ADM 31.
7122 # +-||||-------------------------------------+
7137 # +----------------------------------------------+
7138 # front of case (keyboard)
7140 # S1 - Data Rate - Modem
7141 # S2 - Data Rate - Printer
7142 # ------------------------
7144 # -------------------
7162 # S3 - Interface/Printer/Attributes
7163 # ---------------------------------
7164 # Printer Busy Control
7167 # off off off Busy not active, CD disabled
7168 # off off on Busy not active, CD enabled
7169 # off on off Busy active on J5-20, CD disabled
7170 # on off off Busy active on J5-19, CD disabled - Factory Set.
7171 # on off on Busy active on J5-19, CD enabled
7173 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7175 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7177 # sw6 ON enables printer BUSY active LOW - Factory Setting
7178 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7180 # sw7 ON - steady cursor - Factory Setting
7181 # OFF - blinking cursor
7183 # sw8 ON causes selected attribute character to be displayed
7184 # OFF causes SPACE to be displayed instead - Factory Setting
7190 # sw4 sw1 sw2 sw3 sw4
7191 # ---------------------------
7192 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7193 # Current Loop disabled - Factory Setting
7194 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7196 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7197 # Current Loop Disabled
7199 # sw5 ON disables dot stretching mode - Factory Setting
7200 # OFF enables dot stretching mode
7201 # sw6 ON enables blanking function
7202 # OFF enables underline function - Factory Setting
7203 # sw7 ON causes NULLS to be displayed as NULLS
7204 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7206 # S5 - Word Structure
7207 # -------------------
7208 # sw1 ON enables BREAK key - Factory Setting
7209 # OFF disables BREAK key
7210 # sw2 ON selects 50Hz monitor refresh rate
7211 # OFF selects 60Hz monitor refresh rate - Factory Setting
7213 # Modem Port Selection
7216 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
7217 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
7218 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7219 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
7220 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
7221 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
7222 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
7223 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
7225 # sw6 ON sends bit 8 a 1 (mark)
7226 # OFF sends bit 8 as 0 (space) - Factory Setting
7227 # sw7 ON selects Block Mode
7228 # OFF selects Conversation Mode - Factory Setting
7229 # sw8 ON selects Full Duplex operation
7230 # OFF selects Half Duplex operation - Factory Setting
7234 # sw1, sw2, sw6, sw7 Reserved - Factory 0
7236 # Printer Port Selection
7237 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
7239 # sw8 ON enables Printer Port
7240 # OFF disables Printer Port - Factory Setting
7242 # S7 - Polling Address
7243 # --------------------
7244 # sw1-7 Establish ASCII character which designates terminal polling address
7246 # OFF = logic 1 - Factory Setting
7247 # sw8 ON enables Polling Option
7248 # OFF disables Polling Option - Factory Setting
7251 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
7253 # This adm31 entry uses underline as the standout mode.
7254 # If the adm31 gives you trouble with standout mode, check the DIP switch in
7255 # position 6, bank @c11, 25% from back end of the circuit board. Should be
7256 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
7257 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
7258 adm31|lsi adm31 with sw6 set for underline mode,
7261 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7262 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7263 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
7264 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7265 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7266 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
7267 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
7268 adm31-old|o31|old adm31,
7269 rmul@, smso=\EG4, smul@, use=adm31,
7270 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
7274 if=/usr/share/tabset/vt100,
7275 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
7277 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
7281 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7282 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7283 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
7284 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
7285 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
7286 smir=\Eq, smul@, use=adm+sgr,
7287 # The following termcap for the Lear Siegler ADM-42 leaves the
7288 # "system line" at the bottom of the screen blank (for those who
7289 # find it distracting otherwise)
7290 adm42-ns|lsi adm-42 with no system line,
7291 cbt=\EI\EF \011, clear=\E;\EF \011,
7292 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
7293 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
7294 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
7295 smir=\Eq\EF \011, use=adm42,
7296 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
7297 # The insert mode of this terminal is commented out because it's broken for our
7298 # purposes in that it will shift the position of every character on the page,
7299 # not just the cursor line!
7300 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
7301 adm1178|1178|lsi adm1178,
7303 cols#80, lines#24, xmc#1,
7304 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
7305 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7306 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
7307 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
7308 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
7309 sgr0=\E), smso=\EG4, smul=\EG1,
7313 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
7314 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
7315 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
7317 # ComputerVision Services
7318 # 500 Old Connecticut Path
7322 # Standout mode is dim reverse-video.
7323 pt100|pt200|wren|fenix|prime pt100/pt200,
7325 cols#80, it#8, lines#24,
7326 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
7327 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
7328 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
7329 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
7330 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
7331 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
7332 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
7333 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
7335 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
7336 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
7337 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
7339 cup=\E[%i%p1%d;%p2%dH, use=pt100,
7341 rmso@, smso@, use=pt100,
7342 pt250w|Prime PT250 in 132-column mode,
7343 rmso@, smso@, use=pt100w,
7348 # 3475-A North 1st Street
7350 # Vox: (800)-457-4447
7351 # Fax: (408)-473-1510
7352 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
7354 # Qume was bought by Wyse, but still (as of early 1995) has its own support
7355 # group and production division.
7357 # Discontinued Qume models:
7359 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
7360 # built to replace them, and a qvt119+ which was a 101+ with available wide
7361 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
7362 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
7363 # ANSI-compatible terminals with the qvt323 and qvt61.
7365 # Current Qume models (as of February 1995):
7367 # All current Qume terminals have ANSI-compatible operation modes.
7368 # Qume is still producing the qvt62, which features emulations for other
7369 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
7370 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
7371 # with many emulations including Wyse370, Wyse 325, etc. Their newest
7372 # model is the qvt520, which is vt420-compatible.
7374 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
7376 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
7377 # setup mode. Shift-s should be a configuration save to NVRAM.
7379 qvt101|qvt108|qume qvt 101 and QVT 108,
7382 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
7383 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
7384 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
7385 # What seems to be going on here is that this entry was designed so that
7386 # the normal highlight is bold and standout is dim plus something else
7387 # (reverse-video maybe? But then, are there two <rev> sequences?)
7389 # Added kdch1, kil1, kdl1 based on screenshot -TD:
7390 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
7391 qvt101+|qvt101p|qume qvt 101 PLUS product,
7393 cols#80, lines#24, xmc#0,
7394 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
7395 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7396 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
7397 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7398 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
7399 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
7400 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
7401 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7402 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
7403 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7404 qvt102|qume qvt 102,
7405 cnorm=\E., use=qvt101,
7406 # (qvt103: added <rmam>/<smam> based on init string -- esr)
7407 qvt103|qume qvt 103,
7409 cols#80, it#8, lines#24, vt#3,
7410 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7411 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7412 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
7413 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
7414 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
7415 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
7416 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7417 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
7418 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
7419 rmso=\E[m$<2>, rmul=\E[m$<2>,
7420 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7421 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
7422 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
7423 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
7424 qvt103-w|qume qvt103 132 cols,
7426 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7427 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
7429 cols#80, lines#24, xmc#0,
7430 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
7431 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7432 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
7433 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
7434 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
7435 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
7436 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7437 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7438 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
7439 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7440 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
7441 lines#25, use=qvt119+,
7442 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
7444 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7445 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
7446 lines#25, use=qvt119+,
7447 qvt203|qvt203+|qume qvt 203 Plus,
7448 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
7449 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
7450 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
7451 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7452 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
7454 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7456 # Since a command is present for enabling 25 data lines,
7457 # a specific terminfo entry may be generated for the 203.
7458 # If one is desired for the QVT 119 PLUS then 25 lines must
7459 # be selected in the status line (setup line 9).
7461 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
7463 is2=\E[=40h\E[?3l, use=qvt203,
7464 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
7466 rs2=\E[?3h\E[=40h, use=qvt203,
7468 #### Televideo (tvi)
7471 # 550 East Brokaw Road
7472 # PO Box 49048 95161
7474 # Vox: (408)-954-8333
7475 # Fax: (408)-954-0623
7478 # These require incredible amounts of padding.
7480 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
7481 # Televideo terminals are ANSI and PC-ANSI compatible.
7483 tvi803|televideo 803,
7484 clear=\E*$<10>, use=tvi950,
7486 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7487 # Switch settings are:
7508 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
7524 # U do CR/LF when CR received
7525 # D do CR when CR received
7547 # S2 6 Cursor down key
7551 # S2 7 Screen colour
7555 # S2 8 DSR status (pin 6)
7559 # S2 9 DCD status (pin 8)
7563 # S2 10 DTR status (pin 20)
7566 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7567 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7568 tvi910|televideo model 910,
7570 cols#80, it#8, lines#24, xmc#1,
7571 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7572 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7573 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7574 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7575 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7576 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7577 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7578 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7579 # From: Alan R. Rogers <rogers%albany@csnet-relay>
7580 # as subsequently hacked over by someone at SCO
7581 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7583 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7586 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
7587 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
7588 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
7589 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
7592 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
7593 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
7594 # D U D D 8O1 D U U U 8E2
7596 # S1 9 Autowrap (U = on, D = off)
7597 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7598 # S2 1 Mode (U = block, D = conversational)
7599 # S2 2 Duplex (U = half, D = full)
7600 # S2 3 Hertz (U = 50, D = 60)
7601 # S2 4 Edit mode (U = local, D = duplex)
7602 # S2 5 Cursor type (U = underline, D = block)
7603 # S2 6 Cursor down key (U = send ^J, D = send ^V)
7604 # S2 7 Screen colour (U = green on black, D = black on green)
7605 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
7606 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
7607 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7609 tvi910+|televideo 910+,
7610 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7611 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7612 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7613 ll=\E=7\s, use=tvi910,
7615 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
7616 # <khome> from BRL entry -- esr)
7617 tvi912|tvi914|tvi920|old televideo 912/914/920,
7618 OTbs, OTpt, am, msgr,
7619 cols#80, it#8, lines#24, xmc#1,
7620 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7621 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7622 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7623 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7624 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7625 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7626 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7627 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7629 # We got some new tvi912c terminals that act really weird on the regular
7630 # termcap, so one of our gurus worked this up. Seems that cursor
7631 # addressing is broken.
7632 tvi912cc|tvi912 at cowell college,
7635 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7636 # From: Benjamin C. W. Sittler
7638 # Someone has put a scanned copy of the manual online at:
7639 # http://vt100.net/televideo/912b-om/
7641 # These terminals were produced ca. 1979, and had a 12" monochrome
7642 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7643 # ASCII, and were generally similar to adm3a but with attributes
7644 # (including some with magic cookies), fancy half-duplex mode, and
7647 # Some operations reqire truly incredible amounts of padding. The
7648 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7649 # are so slow as to be nearly unusable.
7651 # There may or may not have been a separate, earlier series of 912/920
7652 # terminals (without the "B" and "C" suffix); I have never seen one,
7653 # and the manual only describes the "B" and "C" series. The 912 and 920
7654 # are quite distinct from the 914 and 924, which were much nicer non-
7655 # magic-cookie terminals similar to the 950.
7657 # This is a new description for the following TeleVideo terminals,
7658 # distinguished chiefly by their keyboards:
7660 # TVI-912B - very odd layout, no function keys (84 keys)
7661 # TVI-920B - typewriter layout, no function keys (103 keys)
7662 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7663 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7665 # To choose a setting for the TERM variable, start with the model:
7667 # Model || base name
7668 # ----------||-----------
7669 # TVI-912B || tvi912b
7670 # TVI-912C || tvi912c
7671 # TVI-920B || tvi920b
7672 # TVI-920C || tvi920c
7674 # Then add a suffix from the following table describing installed options
7675 # and how you'd like to use the terminal:
7677 # Use Video | Second | Visual | Magic | Page || feature
7678 # Attributes | Page | Bell | Cookies | Print || suffix
7679 # ------------|--------|--------|---------|-------||---------
7680 # No | No | N/A | N/A | No || -unk
7681 # No | No | N/A | N/A | Yes || -p
7682 # No | Yes | No | N/A | No || -2p-unk
7683 # No | Yes | No | N/A | Yes || -2p-p
7684 # No | Yes | Yes | N/A | No || -vb-unk
7685 # No | Yes | Yes | N/A | Yes || -vb-p
7686 # Yes | No | N/A | No | N/A ||
7687 # Yes | No | N/A | Yes | N/A || -mc
7688 # Yes | Yes | No | No | N/A || -2p
7689 # Yes | Yes | No | Yes | N/A || -2p-mc
7690 # Yes | Yes | Yes | No | N/A || -vb
7691 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7693 # So e.g. a model 920 C with second page memory option, visual bell
7694 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7695 # second page memory option and using magic cookies would be
7700 # At 9600 baud, the terminal is prone to overflow its input buffer
7701 # during complex operations (insert/delete
7702 # character/line/screen/page), and it does not signal this over the
7703 # RS232 cable. The typical symptom of an overrun is that the terminal
7704 # starts beeping, and output becomes garbled.
7706 # The padding delays in this terminfo were derived using tack(1)
7707 # running on a Linux box connected to a TVI-920C with a later-model
7708 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7709 # vary. The numbers below seem to give the terminal enough time so
7710 # that it doesn't overflow its input buffer and start losing
7715 # If you want to use the FUNCT key on a tvi912[bc], use the
7716 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7717 # the following table (these also work on the 920 series):
7719 # Unshifted Function Keys:
7721 # Key | capname|| Equivalent
7722 # -----|--------||------------
7723 # F1 | <kf1> || FUNCT + @
7724 # F2 | <kf2> || FUNCT + A
7725 # F3 | <kf3> || FUNCT + B
7726 # F4 | <kf4> || FUNCT + C
7727 # F5 | <kf5> || FUNCT + D
7728 # F6 | <kf6> || FUNCT + E
7729 # F7 | <kf7> || FUNCT + F
7730 # F8 | <kf8> || FUNCT + G
7731 # F9 | <kf9> || FUNCT + H
7732 # F10 | <kf10> || FUNCT + I
7733 # F11 | <kf11> || FUNCT + J
7735 # Shifted Function Keys:
7737 # SHIFT + Key | capname|| Equivalent
7738 # -------------|--------||------------
7739 # SHIFT + F1 | <kf12> || FUNCT + `
7740 # SHIFT + F2 | <kf13> || FUNCT + a
7741 # SHIFT + F3 | <kf14> || FUNCT + b
7742 # SHIFT + F4 | <kf15> || FUNCT + c
7743 # SHIFT + F5 | <kf16> || FUNCT + d
7744 # SHIFT + F6 | <kf17> || FUNCT + e
7745 # SHIFT + F7 | <kf18> || FUNCT + f
7746 # SHIFT + F8 | <kf19> || FUNCT + g
7747 # SHIFT + F9 | <kf20> || FUNCT + h
7748 # SHIFT + F10 | <kf21> || FUNCT + i
7749 # SHIFT + F11 | <kf22> || FUNCT + j
7751 # PORTS AND SWITCH SETTINGS
7753 # Here are the switch settings for the TVI-912B/TVI-920B and
7754 # TVI-912C/TVI-920C:
7756 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7757 # 2: 9600 3: 4800 4: 2400 5: 1200
7758 # 6: 600 7: 300 8: 150 9: 75
7761 # S2 UART/Terminal options:
7763 # 1: Not used Not allowed
7764 # 2: Alternate character set Standard character set
7765 # 3: Full duplex Half duplex
7766 # 4: 50 Hz refresh 60 Hz refresh
7767 # 5: No parity Send parity
7768 # 6: 2 stop bits 1 stop bit
7769 # 7: 8 data bits 7 data bits
7770 # 8: Not used Not allowed on Rev E or lower
7771 # 9: Even parity Odd parity
7772 # 10: Steady cursor Blinking cursor
7773 # (On Rev E or lower, use W25 instead of switch 10.)
7775 # S5 UART/Terminal options:
7777 # 1: P3-6 Not connected DSR received on P3-6
7778 # 2: P3-8 Not connected DCD received on P3-8
7780 # 3 Open, 4 Open: P3-20 Not connected
7781 # 3 Open, 4 Closed: DTR on when terminal is on
7782 # 3 Closed, 4 Open: DTR is connected to RTS
7783 # 3 Closed, 4 Closed: Not allowed
7785 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7786 # all data transmitted out of the modem port (P3) will also be
7787 # transmitted out of the printer port (P4).
7789 # 6 Open, 7 Open: Not allowed
7790 # 6 Open, 7 Closed: 20ma current loop input
7791 # 6 Closed, 7 Open: RS232 input
7792 # 6 Closed, 7 Closed: Not allowed
7795 # If the jumper is installed, the effect will occur (the next time the terminal
7798 # S4/W31: Enables automatic LF upon receipt of CR from
7799 # remote or keyboard.
7800 # S4/W32: Enables transmission of EOT at the end of Send. If not
7801 # installed, a carriage return is sent.
7802 # S4/W33: Disables automatic carriage return in column 80.
7803 # S4/W34: Selects Page Print Mode as initial condition. If not
7804 # installed, Extension Mode is selected.
7806 # NON-STANDARD CAPABILITIES
7808 # Sending <u9> or <u7> returns a cursor position report in the format
7809 # YX\r, where Y and X are as in <cup>. This format is described in
7810 # <u8> and <u6>, but it's not clear how one should write an
7811 # appropriate scanf string, since we need to subtract %' ' from the
7812 # character after reading it. The <u9> capability is used by tack(1)
7813 # to synchronize during padding tests, and seems to work for that
7816 # This description also includes the obsolete termcap capabilities
7817 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7819 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7821 # The FUNCT modifier actually works with every normal key by sending
7822 # ^AX\r, where X is the sequence normally sent by that key. This is a
7823 # sort of meta key not currently describable in terminfo.
7825 # There are quite a few other keys (especially on the 920 models,) but
7826 # they are for the most part only useful in block mode.
7828 # These terminals have lots of forms manipulation features, mainly
7829 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7830 # spaces"; nulls are sentinels for "send X" operations); "send X"
7831 # operations for uploading all or part of the screen; and block-mode
7832 # editing keys (they don't send escape sequences, but manipulate video
7833 # memory directly). Block mode is used for local editing, and protect
7834 # mode (in conjunction with the "write protect" attribute,
7835 # a.k.a. half-intensity outside of protect mode) is used to control
7836 # which parts of the screen are edited/sent/printed (by <mc0>).
7838 # There are at least two major families of ROM, "early" and
7839 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7840 # support a few extra escape sequences for manipulating the off-screen
7841 # memory page, and for sending whole pages back to the host (mainly
7842 # useful in block mode.) The descriptions in this file don't use any
7843 # of those sequences: set cursor position including page (\E-PYX,
7844 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7845 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7846 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7847 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7848 # are as in <cup>, and some "send page" features mainly useful for
7849 # forms manipulation.
7851 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7852 # except that a terminal reset (<is2>) enables the keyboard.
7854 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7855 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7859 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7860 # sequences (I infer that in some TeleVideo terminal they may invert
7861 # and uninvert the display) so the <flash> sequence given here is a
7862 # cheesy page-flip instead.
7864 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7865 # tack(1), so it is not included in the descriptions below.
7867 # It's not clear whether auto_left_margin (<bw>) flag should be set
7868 # for these terminals; tack says yes, so it is set here, but this
7869 # differs from other descriptions I've seen.
7871 # Extension print mode (<mc5>) echoes all characters to the printer
7872 # port [in addition to displaying them] except for the page print mode
7873 # sequence (<mc4>); this is a slight violation of the terminfo
7874 # definition for <mc5> but I don't expect it to cause problems. We
7875 # reset to page print mode in <rs1> since it may have been enabled
7878 # The descriptions with plus signs (+) are building blocks.
7880 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7882 cols#80, it#8, lines#24,
7883 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7884 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7885 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7886 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7887 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7888 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7889 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7890 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7891 u7=\E?, u8=%c%c\r, u9=\E?,
7893 # This isn't included in the basic capabilities because it is
7894 # typically unusable in combination with the full range of video
7895 # attributes, since the magic cookie attributes turn into ASCII
7896 # control characters, and the half-intensity ("protected") attribute
7897 # converts all affected characters to spaces.
7899 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7902 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7903 # exposes no other attributes (half-intensity is the only attribute
7904 # that does not generate a magic cookie.)
7906 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7908 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7911 # Full magic-cookie attribute support, with half-intensity reverse
7912 # video for standout. Note that we add a space in the <dim> sequence
7913 # to give a consistent magic-cookie count. Also note that <sgr> uses
7914 # backspacing (in the TVI-supported order) to apply all requested
7915 # attributes with only a single magic cookie.
7917 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7919 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7921 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7922 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7924 # This uses the second page memory option to save & restore screen
7925 # contents. If your terminal is missing the option, this description
7926 # should still work, but that has not been tested.
7928 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7929 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7930 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7932 # This simulates flashing by briefly toggling to the other page
7935 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7936 bel=\EK$<100>\EK, use=tvi912b+2p,
7938 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7940 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7941 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7942 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7943 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7944 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7945 kf8=^AG\r, kf9=^AH\r,
7947 # Combinations of the basic building blocks
7949 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7950 use=tvi912b+2p, use=tvi912b-unk,
7952 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7953 use=tvi912b+vb, use=tvi912b-unk,
7955 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7956 use=tvi912b+printer, use=tvi912b-unk,
7958 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7959 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7961 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7962 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7964 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7965 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7967 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7968 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7970 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7971 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7973 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7974 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7976 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7977 use=tvi912b+dim, use=tvi912b-unk,
7979 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7980 use=tvi912b+mc, use=tvi912b-unk,
7982 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7983 use=tvi920b+fn, use=tvi912b-unk,
7985 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7986 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7988 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7989 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7991 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7992 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7994 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7995 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7998 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7999 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
8002 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
8003 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
8006 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
8007 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
8010 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
8011 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
8014 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
8015 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
8018 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
8019 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
8021 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
8022 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
8024 # Televideo 921 and variants
8025 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
8026 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
8027 # also added empty <acsc> to suppress tic warning -- esr)
8028 tvi921|televideo model 921 with sysline same as page & real vi function,
8029 OTbs, OTpt, am, hs, xenl, xhp,
8030 cols#80, lines#24, xmc#0,
8031 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8032 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8033 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8034 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
8035 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
8036 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
8037 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
8038 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
8039 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
8040 # without the beeper
8041 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
8042 # also added empty <acsc> to suppress tic warning -- esr)
8043 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
8045 cols#80, lines#24, xmc#0,
8046 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8047 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8048 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8049 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8050 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8051 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8052 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8053 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8054 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8055 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8056 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8057 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8058 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8059 kil1=\EE$<2*/>, use=tvi92B,
8061 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8062 # in from a BSD termcap file because it looks like they do something the
8063 # old ones skip -- esr)
8064 tvi924|televideo tvi924,
8065 am, bw, hs, in, mir, msgr, xenl, xon,
8066 cols#80, it#8, lines#24, wsl#80, xmc#0,
8067 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8068 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8069 cub1=^H, cud1=^V, cuf1=^L,
8070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8071 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8072 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8073 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8074 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8075 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8076 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8077 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8078 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8079 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8080 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8081 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8082 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8085 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8087 # Here are the settings for the external (baud) switches (S1):
8090 # 7 8 9 10 [Printer]
8091 # 1 2 3 4 [Main RS232]
8092 # -----------------------------------------------------
8111 # Settings for word length and stop-bits (S1)
8113 # Position Description
8115 # ---------------------------
8122 # S2 (external) settings
8124 # Position Up Dn Description
8125 # --------------------------------------------
8127 # X Duplex edit (transmit editing keys)
8128 # --------------------------------------------
8129 # 2 X 912/920 emulation
8131 # --------------------------------------------
8135 # --------------------------------------------
8139 # --------------------------------------------
8143 # --------------------------------------------
8147 # --------------------------------------------
8151 # --------------------------------------------
8152 # 6 X White on black display
8153 # X Black on white display
8154 # --------------------------------------------
8157 # --------------------------------------------
8160 # --------------------------------------------
8163 # --------------------------------------------
8166 # --------------------------------------------
8167 # 10 X CR/LF (Auto LF)
8170 # S3 (internal switch) settings:
8172 # Position Up Dn Description
8173 # --------------------------------------------
8176 # --------------------------------------------
8179 # --------------------------------------------
8182 # --------------------------------------------
8185 # --------------------------------------------
8188 # --------------------------------------------
8189 # 4 X Blinking block cursor
8191 # --------------------------------------------
8192 # 4 X Blinking underline cursor
8194 # --------------------------------------------
8195 # 4 X Steady block cursor
8197 # --------------------------------------------
8198 # 4 X Steady underline cursor
8200 # --------------------------------------------
8201 # 6 X Screen blanking timer (ON)
8202 # X Screen blanking timer (OFF)
8203 # --------------------------------------------
8204 # 7 X Page attributes
8206 # --------------------------------------------
8207 # 8 X DCD disconnected
8209 # --------------------------------------------
8210 # 9 X DSR disconnected
8212 # --------------------------------------------
8213 # 10 X DTR Disconnected
8215 # --------------------------------------------
8217 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
8218 tvi925|televideo 925,
8219 OTbs, am, bw, hs, ul,
8220 cols#80, lines#24, xmc#1,
8221 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
8222 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8223 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
8224 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
8225 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
8226 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8227 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8228 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8229 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
8230 tsl=\Eh\Ef, use=adm+sgr,
8231 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
8232 # to avoid "magic cookie" standout glitch:
8233 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
8235 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8237 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
8238 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
8239 # for additional capabilities,
8240 # The following tvi descriptions from B:pjphar and virus!mike
8241 # is for all 950s. It sets the following attributes:
8242 # full duplex (\EDF) write protect off (\E()
8243 # conversation mode (\EC) graphics mode off (\E%)
8244 # white on black (\Ed) auto page flip off (\Ew)
8245 # turn off status line (\Eg) clear status line (\Ef\r)
8246 # normal video (\E0) monitor mode off (\EX or \Eu)
8247 # edit mode (\Er) load blank char to space (\Ee\040)
8248 # line edit mode (\EO) enable buffer control (^O)
8249 # protect mode off (\E\047) duplex edit keys (\El)
8250 # program unshifted send key to send line all (\E016)
8251 # program shifted send key to send line unprotected (\E004)
8252 # set the following to nulls:
8253 # field delimiter (\Ex0\200\200)
8254 # line delimiter (\Ex1\200\200)
8255 # start-protected field delimiter (\Ex2\200\200)
8256 # end-protected field delimiter (\Ex3\200\200)
8257 # set end of text delimiter to carriage return/null (\Ex4\r\200)
8259 # TVI 950 Switch Setting Reference Charts
8263 # S1 1 2 3 4 5 6 7 8 9 10
8264 # +-----------------------+-----+-----+-----------------------+
8265 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
8267 # +------+-----------------------+-----+-----+-----------------------+
8268 # | Up | See | 7 | 2 | See |
8269 # +------+-----------------------+-----+-----+-----------------------+
8270 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
8271 # +------+-----------------------+-----+-----+-----------------------+
8274 # S2 1 2 3 4 5 6 7 8 9 10
8275 # +-----+-----+-----------------+-----+-----------+-----+-----+
8276 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
8277 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8278 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
8279 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8280 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
8281 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8285 # +-----------+-----+-----+-----+-----+-----------+
8286 # | Display | 1 | 2 | 3 | 4 | Baud |
8287 # +-----------+-----+-----+-----+-----+ |
8288 # | Printer | 7 | 8 | 9 | 10 | Rate |
8289 # +-----------+-----+-----+-----+-----+-----------+
8290 # | D | D | D | D | 9600 |
8291 # | U | D | D | D | 50 |
8292 # | D | U | D | D | 75 |
8293 # | U | U | D | D | 110 |
8294 # | D | D | U | D | 135 |
8295 # | U | D | U | D | 150 |
8296 # | D | U | U | D | 300 |
8297 # | U | U | U | D | 600 |
8298 # | D | D | D | U | 1200 |
8299 # | U | D | D | U | 1800 |
8300 # | D | U | D | U | 2400 |
8301 # | U | U | D | U | 3600 |
8302 # | D | D | U | U | 4800 |
8303 # | U | D | U | U | 7200 |
8304 # | D | U | U | U | 9600 |
8305 # | U | U | U | U | 19200 |
8306 # +-----+-----+-----+-----+-----------+
8309 # +-----+-----+-----+-----------+
8310 # | 3 | 4 | 5 | Parity |
8311 # +-----+-----+-----+-----------+
8312 # | X | X | D | None |
8313 # | D | D | U | Odd |
8314 # | D | U | U | Even |
8315 # | U | D | U | Mark |
8316 # | U | U | U | Space |
8317 # +-----+-----+-----+-----------+
8321 # +-----+-----+-----------------+
8322 # | 7 | 8 | Communication |
8323 # +-----+-----+-----------------+
8324 # | D | D | Half Duplex |
8325 # | D | U | Full Duplex |
8328 # +-----+-----+-----------------+
8330 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
8331 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
8332 # should be present and all tvi native modes use the same string for this.
8333 # Finally, note that BSD has cud1=^V. -- esr)
8334 tvi950|televideo 950,
8335 OTbs, am, hs, mir, msgr, xenl, xon,
8336 cols#80, it#8, lines#24, xmc#1,
8337 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
8338 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8339 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8340 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
8341 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
8343 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
8344 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
8345 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
8346 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8347 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8348 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
8349 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
8352 # is for 950 with two pages adds the following:
8353 # set 48 line page (\E\\2)
8354 # place cursor at page 0, line 24, column 1 (\E-07 )
8355 # set local (no send) edit keys (\Ek)
8357 # two page 950 adds the following:
8358 # when entering ex, set 24 line page (\E\\1)
8359 # when exiting ex, reset 48 line page (\E\\2)
8360 # place cursor at 0,24,1 (\E-07 )
8361 # set duplex (send) edit keys (\El) when entering vi
8362 # set local (no send) edit keys (\Ek) when exiting vi
8364 tvi950-2p|televideo950 w/2 pages,
8365 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
8366 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8367 smkx=\El, use=tvi950,
8369 # is for 950 with four pages adds the following:
8370 # set 96 line page (\E\\3)
8371 # place cursor at page 0, line 24, column 1 (\E-07 )
8373 # four page 950 adds the following:
8374 # when entering ex, set 24 line page (\E\\1)
8375 # when exiting ex, reset 96 line page (\E\\3)
8376 # place cursor at 0,24,1 (\E-07 )
8378 tvi950-4p|televideo950 w/4 pages,
8379 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
8380 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8381 smkx=\El, use=tvi950,
8383 # <is2> for reverse video 950 changes the following:
8384 # set reverse video (\Ed)
8386 # set vb accordingly (\Ed ...delay... \Eb)
8388 tvi950-rv|televideo950 rev video,
8389 flash=\Ed$<200/>\Eb,
8390 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
8393 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
8394 tvi950-rv-2p|televideo950 rev video w/2 pages,
8395 flash=\Ed$<200/>\Eb,
8396 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
8397 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8398 smkx=\El, use=tvi950,
8400 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
8401 tvi950-rv-4p|televideo950 rev video w/4 pages,
8402 flash=\Ed$<200/>\Eb,
8403 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
8404 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8405 smkx=\El, use=tvi950,
8406 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
8407 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
8408 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
8409 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
8410 # the :ko: string had :cl: in it, which means that one of the original
8411 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
8412 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
8413 # ko implies -- esr)
8414 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
8416 tvi955|televideo 955,
8419 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
8420 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
8421 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
8422 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
8423 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
8424 rmam=\E[=7l, rmxon=^N,
8425 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
8426 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
8428 tvi955-w|955-w|televideo955 w/132 cols,
8430 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8431 # use half-intensity as normal mode, full intensity as <bold>
8432 tvi955-hb|955-hb|televideo955 half-bright,
8433 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
8434 sgr0=\EG0\E[=5h, use=tvi955,
8435 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
8436 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
8437 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
8438 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
8439 # it does to the function keys. I deduced <rmam>/<smam>.
8440 # also added empty <acsc> to suppress tic warning, -- esr)
8441 tvi970|televideo 970,
8442 OTbs, OTpt, am, da, db, mir, msgr,
8443 cols#80, it#8, lines#24,
8444 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
8445 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
8446 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
8447 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
8448 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
8449 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
8450 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8451 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
8452 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
8453 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8454 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
8455 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
8456 smul=\E[4m, vpa=\E[%i%p1%dd,
8457 tvi970-vb|televideo 970 with visual bell,
8458 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8460 tvi970-2p|televideo 970 with using 2 pages of memory,
8461 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
8463 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
8464 # per line (rather than 40), Esc K chooses the normal character set. Not sure
8465 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
8466 # <smul> strings are klutzy, but at least use no screen space.
8467 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
8468 # its absence means <smam>=\Ev isn't safe to use. -- esr)
8469 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
8470 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
8471 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
8472 tvipt|televideo personal terminal,
8475 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
8476 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
8477 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
8478 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
8479 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
8480 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
8481 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
8482 tvi9065|televideo 9065,
8483 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8484 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8486 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8487 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8488 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8489 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8490 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8491 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8492 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8493 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8494 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8495 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8497 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8498 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8499 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8500 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8501 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8502 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8503 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8504 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8505 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8506 pfx=\E|%p1%{48}%+%c1%p2%s\031,
8507 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8508 rep=\E[%p2%db%p1%c, rev=\EG4,
8509 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8510 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8511 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8512 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8513 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8514 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8515 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
8516 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8517 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8518 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8522 # In September 1993, Visual Technology of Westboro, Massachusetts,
8523 # merged with White Pine Software of Nashua, New Hampshire.
8525 # White Pine Software may be contacted at +1 603/886-9050.
8526 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8529 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8530 # Recently I hacked together the following termcap for Visual
8531 # Technology's Visual 50 terminal. It's a slight modification of
8533 # It's intended to run when the Visual 50 is in vt52 emulation mode
8534 # (I know what you're thinking; if it's emulating a vt52, then why
8535 # another termcap? Well, it turns out that the Visual 50 can handle
8536 # <dl1> and db(?) among other things, which the vt52 can't)
8537 # The termcap works OK for the most part. The only problem is on
8538 # character inserts. The whole line gets painfully redrawn for each
8539 # character typed. Any suggestions?
8540 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
8541 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
8542 # disguise; <kf7>-<kf9> are really l1-l3.
8544 OTbs, OTpt, am, da, db, msgr,
8545 cols#80, it#8, lines#24,
8546 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8547 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8548 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8549 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8550 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8551 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8552 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8553 # this one was BSD & SCO's vi50
8554 vi50adm|visual 50 in adm3a mode,
8556 cols#80, it#8, lines#24,
8557 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8558 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8559 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8560 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8562 # From: Jeff Siegal <jbs@quiotix.com>
8564 OTbs, am, mir, msgr,
8565 cols#80, it#8, lines#24,
8566 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8567 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8568 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8569 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8570 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8573 # Visual 200 from BRL
8574 # The following switch settings are assumed for normal operation:
8575 # FULL_DUPLEX SCROLL CR
8576 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
8577 # Other switches may be set for operator convenience or communication
8579 # Character insertion is kludged in order to get around the "beep" misfeature.
8580 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8581 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8582 # and <dl1> strings, but we seem to get along fine without them.
8584 OTbs, OTpt, am, mir, msgr,
8585 OTkn#10, cols#80, it#8, lines#24,
8586 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8587 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8588 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8589 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8590 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8591 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8592 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8593 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8594 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8595 rmacs=\EG, rmkx=\E>, rmso=\E3,
8596 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8597 smkx=\E=, smso=\E4, tbc=\Eg,
8598 # The older Visuals didn't come with function keys. This entry uses
8599 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8600 # If your version of vi doesn't support function keys you may want
8602 vi200-f|visual 200 no function keys,
8603 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8604 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8605 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8607 vi200-rv|visual 200 reverse video,
8608 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8610 # the function keys are programmable but we don't reprogram them to their
8611 # default values with <is2> because programming them is very verbose. maybe
8612 # an initialization file should be made for the 300 and they could be stuck
8614 # (vi300: added <rmam>/<smam> based on init string -- esr)
8615 vi300|visual 300 ansi x3.64,
8618 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8619 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8620 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8622 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8623 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8624 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8625 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8626 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8627 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8628 smso=\E[1m, smul=\E[4m,
8629 # some of the vi300s have older firmware that has the command
8630 # sequence for setting editing extent reversed.
8631 vi300-old|visual 300 with old firmware (set edit extent reversed),
8632 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8635 # Visual 500 prototype entry from University of Wisconsin.
8636 # The best place to look for the escape sequences is page A1-1 of the
8637 # Visual 500 manual. The initialization sequence given here may be
8638 # overkill, but it does leave out some of the initializations which can
8639 # be done with the menus in set-up mode.
8640 # The :xp: line below is so that emacs can understand the padding requirements
8641 # of this slow terminal. :xp: is 10 time the padding factor.
8642 # (vi500: removed unknown :xp#4: termcap;
8643 # also added empty <acsc> to suppress tic warning -- esr)
8646 cols#80, it#8, lines#33,
8647 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8648 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8649 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8650 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8651 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8653 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8654 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8655 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8656 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8658 # The visual 550 is a visual 300 with tektronix graphics,
8659 # and with 33 lines. clear screen is modified here to
8660 # also clear the graphics.
8661 vi550|visual 550 ansi x3.64,
8663 clear=\030\E[H\E[2J, use=vi300,
8665 vi603|visual603|visual 603,
8667 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8668 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8669 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8670 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8671 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8672 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8673 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8679 # 3471 North First Street
8680 # San Jose, CA 95134
8681 # Vox: (408)-473-1200
8682 # Fax: (408) 473-1222
8683 # Web: http://www.wyse.com
8685 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8686 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8687 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8688 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8690 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8691 # They now own the Qume and Amdek brands, too. So these are the people to
8692 # talk with about all Link, Qume, and Amdek terminals.
8694 # These entries include a few small fixes.
8695 # I canceled the bel capacities in the vb entries.
8696 # I made two trivial syntax fixes in the wyse30 entry.
8697 # I made some entries relative to adm+sgr.
8700 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8702 # Although the Wyse 30 can support more than one attribute
8703 # it requires magic cookies to do so. Many applications do not
8704 # function well with magic cookies. The following terminfo uses
8705 # the protect mode to support one attribute (dim) without cookies.
8706 # If more than one attribute is needed then the wy30-mc terminfo
8709 wy30|wyse30|Wyse 30,
8710 am, bw, hs, mc5i, mir, msgr, xon,
8711 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8712 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8713 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8714 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8715 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8716 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8717 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8718 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8719 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8720 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8721 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8722 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8723 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8724 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8725 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8726 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8727 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8728 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8729 smso=\E`7\E), tbc=\E0, tsl=\EF,
8731 # This terminal description uses the non-hidden attribute mode
8732 # (with magic cookie).
8734 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8735 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8738 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8739 rmcup=\EG0, rmso=\EG0,
8740 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8741 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8742 smso=\EG4, use=wy30, use=adm+sgr,
8743 # The mandatory pause used by <flash> does not work with
8744 # older versions of terminfo. If you see this effect then
8745 # unset xon and delete the / from the delay.
8746 # i.e. change $<100/> to $<100>
8747 wy30-vb|wyse30-vb|wyse 30 visible bell,
8750 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8751 # Normal) without magic cookies by using the protect mode.
8752 # The following description uses this feature, but when more
8753 # than one attribute is put on the screen at once, all attributes
8754 # will be changed to be the same as the last attribute given.
8755 # The Wyse 50 can support more attributes when used with magic
8756 # cookies. The wy50-mc terminal description uses magic cookies
8757 # to correctly handle multiple attributes on a screen.
8759 wy50|wyse50|Wyse 50,
8760 am, bw, hs, mc5i, mir, msgr, xon,
8761 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8762 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8763 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8764 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8765 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8766 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8767 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8768 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8769 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8770 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8771 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8772 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8773 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8774 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8775 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8776 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8777 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8778 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8779 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8780 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8781 smso=\E`6\E), tbc=\E0, tsl=\EF,
8783 # This terminal description uses the non-hidden attribute mode
8784 # (with magic cookie).
8786 # The mandatory pause used by flash does not work with some
8787 # older versions of terminfo. If you see this effect then
8788 # unset <xon> and delete the / from the delay.
8789 # i.e. change $<100/> to $<100>
8790 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8791 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8794 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8795 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8796 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8797 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8798 smso=\EGt, use=wy50, use=adm+sgr,
8799 wy50-vb|wyse50-vb|wyse 50 visible bell,
8801 wy50-w|wyse50-w|wyse 50 132-column,
8802 cols#132, lw#7, nlab#16, wsl#97,
8803 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8805 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8809 # The Wyse 350 is a Wyse 50 with color.
8810 # Unfortunately this means that it has magic cookies.
8811 # The color attributes are designed to overlap the reverse, dim and
8812 # underline attributes. This is nice for monochrome applications
8813 # because you can make underline stuff green (or any other color)
8814 # but for true color applications it's not so hot because you cannot
8815 # mix color with reverse, dim or underline.
8816 # To further complicate things one of the attributes must be
8817 # black (either the foreground or the background). In reverse video
8818 # the background changes color with black letters. In normal video
8819 # the foreground changes colors on a black background.
8820 # This terminfo uses some of the more advanced features of curses
8821 # to display both color and blink. In the final analysis I am not
8822 # sure that the wy350 runs better with this terminfo than it does
8823 # with the wy50 terminfo (with user adjusted colors).
8825 # The mandatory pause used by flash does not work with
8826 # older versions of terminfo. If you see this effect then
8827 # unset xon and delete the / from the delay.
8828 # i.e. change $<100/> to $<100>
8830 # Bug: The <op> capability resets attributes.
8831 wy350|wyse350|Wyse 350,
8832 am, bw, hs, mc5i, mir, xon,
8833 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8835 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8836 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8837 cub1=^H, cud1=^J, cuf1=^L,
8838 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8839 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8840 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8841 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8842 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8843 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8844 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8845 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8846 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8847 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8848 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8849 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8850 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8851 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8852 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8853 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8854 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8855 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8856 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8857 wy350-vb|wyse350-vb|wyse 350 visible bell,
8859 wy350-w|wyse350-w|wyse 350 132-column,
8860 cols#132, lw#7, nlab#16, wsl#97,
8861 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8863 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8866 # This terminfo description is untested.
8867 # The wyse100 emulates an adm31, so the adm31 entry should work.
8871 cols#80, lines#24, xmc#1,
8872 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8873 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8874 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8875 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8876 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8877 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8878 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8880 # The Wyse 120/150 has most of the features of the Wyse 60.
8881 # This terminal does not need padding up to 9600 baud!
8882 # <msgr> should be set but the clear screen fails when in
8883 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8886 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8887 am, bw, hs, km, mc5i, mir, msgr, xon,
8888 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8889 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8890 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8891 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8892 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8893 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8894 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8895 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8896 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8897 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8898 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8899 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8900 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8901 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8902 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8903 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8904 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8905 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8906 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8907 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8908 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8909 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8911 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8912 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8913 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8914 tbc=\E0, tsl=\EF, use=adm+sgr,
8916 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8917 cols#132, lw#7, nlab#16, wsl#97,
8918 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8919 rs2=\E`;$<70>, use=wy120,
8921 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8922 lh@, lines#25, lw@, nlab@,
8923 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8925 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8926 lh@, lines#25, lw@, nlab@,
8927 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8929 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8932 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8935 # The Wyse 60 is like the Wyse 50 but with more padding.
8936 # The reset strings are slow and the pad times very depending
8937 # on other parameters such as font loading. I have tried
8938 # to follow the following outline:
8940 # <rs1> -> set personality
8941 # <rs2> -> set number of columns
8942 # <rs3> -> set number of lines
8943 # <is1> -> select the proper font
8944 # <is2> -> do the initialization
8945 # <is3> -> set up display memory (2 pages)
8947 # The Wyse 60's that have vt100 emulation are slower than the
8948 # older Wyse 60's. This change happened mid-1987.
8949 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8951 # The meta key is only half right. This terminal will return the
8952 # high order bit set when you hit CTRL-function_key
8954 # It may be useful to assign two function keys with the
8955 # values \E=(\s look at old data in page 1
8956 # \E=W, look at bottom of page 1
8957 # where \s is a space ( ).
8960 # The Wyse 60 runs faster when the XON/XOFF
8961 # handshake is turned off.
8963 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8964 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8965 wy60|wyse60|Wyse 60,
8966 am, bw, hs, km, mc5i, mir, msgr,
8967 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8968 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8969 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8970 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8971 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8972 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8973 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8974 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8975 ip=$<3>, is1=\EcB0\EcC1,
8976 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8977 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8978 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8979 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8980 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8981 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8982 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8983 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8984 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8985 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8986 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8987 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8988 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8989 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8990 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8991 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8992 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8993 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8994 tbc=\E0, tsl=\EF, use=adm+sgr,
8996 wy60-w|wyse60-w|wyse 60 132-column,
8997 cols#132, lw#7, nlab#16, wsl#97,
8998 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8999 rs2=\EeF$<150>\E`;$<150>, use=wy60,
9001 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
9002 lh@, lines#25, lw@, nlab@,
9003 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
9004 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
9005 lh@, lines#25, lw@, nlab@,
9006 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
9008 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
9010 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
9011 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
9012 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
9013 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
9014 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
9015 cols#132, lw#7, nlab#16, wsl#97,
9016 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9017 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
9018 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
9020 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
9021 lh@, lines#43, lw@, nlab@,
9022 pln@, rs3=\Ee+$<150>, use=wy60-42,
9023 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
9024 lh@, lines#43, lw@, nlab@,
9025 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
9027 wy60-vb|wyse60-vb|Wyse 60 visible bell,
9029 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
9032 # The Wyse-99GT looks at lot like the Wyse 60 except that it
9033 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
9034 # setup parameter controls the number of lines on the screen.
9035 # For the Wyse 99GT the "lines" setup parameter controls the
9036 # number of lines in a page. The screen can display 25 lines max.
9037 # The Wyse-99GT also has personalities for the VT220 and
9038 # Tektronix 4014. But this has no bearing on the native mode.
9040 # (msgr) should be set but the clear screen fails when in
9041 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9042 # then set msgr, else use msgr@.
9044 # u0 -> enter Tektronix mode
9045 # u1 -> exit Tektronix mode
9047 wy99gt|wyse99gt|Wyse 99gt,
9049 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9050 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9051 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9052 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9053 u0=\E~>\E8, u1=\E[42h, use=wy60,
9055 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9056 cols#132, lw#7, nlab#16, wsl#97,
9057 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9058 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9061 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9062 lh@, lines#25, lw@, nlab@,
9063 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9065 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9066 lh@, lines#25, lw@, nlab@,
9067 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9069 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9072 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9075 # Can't set tabs! Other bugs (ANSI mode only):
9076 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9077 # is too much complex to be described);
9078 # - meta key can't be described (the terminal forgets it when reset);
9079 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9080 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9082 # dch1 has been commented out because it causes annoying glittering when
9083 # vi deletes one character at the beginning of a line with tabs in it.
9084 # dch makes sysgen(1M) have a horrible behaviour when deleting
9085 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9086 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9087 # not, so smir and rmir are commented out as well.
9088 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9089 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9090 am, km, mc5i, mir, msgr, xenl,
9091 cols#80, it#8, lines#25, vt#3,
9092 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9093 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9094 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9095 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9096 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9097 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9098 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9099 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9100 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9101 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9102 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9103 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9104 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9105 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9106 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9107 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9108 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9109 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9110 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9111 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9112 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9113 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9114 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9116 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9117 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9118 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9120 # This is the american terminal. Here tabs work fine.
9121 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9122 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9123 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9125 # This terminal (firmware version 02) has a lot of bugs:
9127 # - other bugs in ANSI modes (see above).
9128 # This description disables handshaking when using cup. This is because
9129 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9130 # cannot be used at speeds greater than 9600 baud, because at greater
9131 # speeds handshaking is needed even for character sending. If you use
9132 # DTR handshaking, you can use even greater speeds.
9133 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9134 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9135 am, bw, hs, km, mc5i, mir, msgr, xon,
9136 cols#80, it#8, lines#25, wsl#46,
9137 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9138 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9139 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9140 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9141 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9142 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9143 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9145 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9146 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9147 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9148 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9149 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9150 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9151 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9152 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9153 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9154 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9155 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9156 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9157 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9158 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9160 # This is the american terminal. Here tabs work.
9161 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9162 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9163 hts=\E1, tbc=\E0, use=wy99f,
9166 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9167 # The reset strings are slow and the pad times very depending
9168 # on other parameters such as font loading. I have tried
9169 # to follow the following outline:
9171 # <rs1> -> set personality
9172 # <rs2> -> set number of columns
9173 # <rs3> -> set number of lines
9174 # <is1> -> select the proper font
9175 # <is2> -> do the initialization
9176 # <is3> -> set up display memory (2 pages)
9178 # The display memory may be used for either text or graphics.
9179 # When "Display Memory = Shared" the terminal will have more pages
9180 # but garbage may be left on the screen when you switch from
9181 # graphics to text. If "Display Memory = Unshared" then the
9182 # text area will be only one page long.
9184 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9185 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9186 wy160|wyse160|Wyse 160,
9187 am, bw, hs, km, mc5i, mir, msgr,
9188 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9189 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9190 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9191 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9192 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9193 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9194 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9195 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9196 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9197 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9198 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9199 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9200 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9201 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9202 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9203 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9204 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9205 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9206 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9207 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9208 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9209 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9210 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9211 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9212 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9213 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9214 tbc=\E0, tsl=\EF, use=adm+sgr,
9216 wy160-w|wyse160-w|wyse 160 132-column,
9217 cols#132, lw#7, nlab#16, wsl#90,
9218 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9219 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9221 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
9222 lh@, lines#25, lw@, nlab@,
9223 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9224 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
9225 lh@, lines#25, lw@, nlab@,
9226 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9228 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
9230 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
9231 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
9232 rs3=\Ee*$<150>, use=wy160,
9233 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
9234 cols#132, lw#7, nlab#16, wsl#90,
9235 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
9236 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9238 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
9239 lh@, lines#43, lw@, nlab@,
9240 pln@, rs3=\Ee+$<150>, use=wy160-42,
9241 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
9242 lh@, lines#43, lw@, nlab@,
9243 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9245 wy160-vb|wyse160-vb|Wyse 160 visible bell,
9247 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
9250 # The Wyse 75 is a vt100 lookalike without advanced video.
9252 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
9253 # Underline) without magic cookies. The following description
9254 # uses this capability, but when more than one attribute is
9255 # put on the screen at once, all attributes will be changed
9256 # to be the same as the last attribute given.
9257 # The Wyse 75 can support more attributes when used with magic
9258 # cookies. The wy75-mc terminal description uses magic cookies
9259 # to correctly handle multiple attributes on a screen.
9261 wy75|wyse75|wyse 75,
9262 am, hs, mc5i, mir, msgr, xenl, xon,
9263 cols#80, lines#24, ma#1, pb#1201, wsl#78,
9264 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9265 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
9266 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
9267 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9268 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9269 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
9270 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
9271 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
9272 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
9273 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
9274 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9275 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9276 ind=\n$<2>, ip=$<1>,
9277 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
9278 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
9279 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
9280 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9281 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9282 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
9283 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
9284 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9285 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
9286 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
9287 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
9288 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
9289 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
9291 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
9292 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9293 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
9294 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9296 # This terminal description uses the non-hidden attribute mode
9297 # (with magic cookie).
9299 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
9302 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
9303 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
9304 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
9305 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
9307 wy75-vb|wyse75-vb|wyse 75 with visible bell,
9310 wy75-w|wyse75-w|wyse 75 in 132 column mode,
9312 rs2=\E[35h\E[?3h$<80>, use=wy75,
9313 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
9317 # Wyse 85 emulating a vt220 7 bit mode.
9318 # 24 line screen with status line.
9320 # The vt220 mode permits more function keys but it wipes out
9321 # the escape key. I strongly recommend that <f11> be set to
9323 # The terminal may have to be set for 8 data bits and 2 stop
9324 # bits for the arrow keys to work.
9325 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
9326 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
9327 # <dch> leave trash on the screen when used without XON/XOFF.
9329 wy85|wyse85|wyse 85,
9330 am, hs, mc5i, mir, msgr, xenl, xon,
9331 cols#80, it#8, lines#24, wsl#80,
9332 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9333 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9334 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9335 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9336 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9337 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9338 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9339 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9340 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9341 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9342 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9343 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9344 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9345 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9346 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9347 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
9348 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9349 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9350 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
9351 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
9352 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
9353 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9354 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9355 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9356 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9358 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9359 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9360 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9361 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9363 # Wyse 85 with visual bell.
9364 wy85-vb|wyse85-vb|wyse 85 with visible bell,
9365 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9367 # Wyse 85 in 132-column mode.
9368 wy85-w|wyse85-w|wyse 85 in 132-column mode,
9370 rs2=\E[35h\E[?3h$<70>, use=wy85,
9372 # Wyse 85 in 132-column mode with visual bell.
9373 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
9376 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
9377 # This copes with an apparent firmware bug in the wy85. He writes:
9378 # "What I did was change leave the terminal cursor keys set to Normal
9379 # (instead of application), and change \E[ to \233 for all the keys in
9380 # terminfo. At one point, I found some reference indicating that this
9381 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
9382 # me), but I can't find that and the server under my bookmark to "Wyse
9383 # Technical" isn't responding. So there's the question of wether the wy85
9384 # terminfo should reflect the manufactuer's intended behaviour of the terminal
9386 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
9387 am, hs, mc5i, mir, msgr, xenl, xon,
9388 cols#80, it#8, lines#24, wsl#80,
9389 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9390 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9391 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9392 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9393 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9394 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9395 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9396 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9397 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9398 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9399 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9400 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9401 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9402 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9403 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
9404 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
9405 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
9406 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
9407 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
9408 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
9409 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
9410 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
9411 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
9412 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9413 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9414 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9415 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9417 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
9418 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9419 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9420 tsl=\E[40h\E7\E[25;%i%p1%dH,
9422 # Wyse 185 emulating a vt320 7 bit mode.
9424 # This terminal always displays 25 lines. These lines may be used
9425 # as 24 data lines and a terminal status line (top or bottom) or
9426 # 25 data lines. The 48 and 50 line modes change the page size
9427 # and not the number of lines on the screen.
9429 # The Compose Character key can be used as a meta key if changed
9432 wy185|wyse185|wyse 185,
9433 am, hs, km, mc5i, mir, msgr, xenl, xon,
9434 cols#80, it#8, lines#24, wsl#80,
9435 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9436 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9437 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9438 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9439 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9440 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9441 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
9442 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9443 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
9444 el=\E[K, el1=\E[1K, enacs=\E)0,
9445 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
9446 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
9447 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
9448 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9449 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
9450 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9451 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
9452 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9453 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9454 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
9455 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9456 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
9457 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
9458 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
9459 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
9460 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9461 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9462 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9463 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9464 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9465 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9466 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
9469 # Wyse 185 with 24 data lines and top status (terminal status)
9470 wy185-24|wyse185-24|wyse 185 with 24 data lines,
9472 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9475 # Wyse 185 with visual bell.
9476 wy185-vb|wyse185-vb|wyse 185+flash,
9479 # Wyse 185 in 132-column mode.
9480 wy185-w|wyse185-w|wyse 185 in 132-column mode,
9482 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9483 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9485 # Wyse 185 in 132-column mode with visual bell.
9486 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9489 # wy325 terminfo entries
9490 # Done by Joe H. Davis 3-9-92
9492 # lines 25 columns 80
9494 wy325|wyse325|Wyse epc,
9495 am, bw, hs, mc5i, mir,
9496 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9497 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9498 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9499 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9500 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9501 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9502 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9503 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9504 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9505 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9506 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9507 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9508 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9509 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9510 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9511 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9512 mc0=\EP, mc4=^T, mc5=\Ed#,
9513 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9514 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9515 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9516 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9517 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9519 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9520 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9521 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9522 tsl=\EF, use=adm+sgr,
9525 # lines 24 columns 80 vb
9527 wy325-vb|wyse325-vb|wyse-325 with visual bell,
9531 # lines 24 columns 132
9533 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9534 cols#132, lw#7, nlab#16, wsl#97,
9535 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9536 rs2=\E`;$<70>, use=wy325,
9538 # lines 25 columns 80
9540 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9541 lh@, lines#25, lw@, nlab@,
9542 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9544 # lines 25 columns 132
9546 wy325-25w|wyse325-25w|wy325 132 columns,
9547 lh@, lines#25, lw@, nlab@,
9548 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9550 # lines 25 columns 132 vb
9552 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9556 # lines 42 columns 80
9558 wy325-42|wyse325-42|wyse-325 42 lines,
9559 lh@, lines#42, lw@, nlab@,
9560 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9562 # lines 42 columns 132
9564 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9565 lh@, lines#42, lw@, nlab@,
9566 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9568 # lines 42 columns 132 vb
9570 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9573 # lines 43 columns 80
9575 wy325-43|wyse325-43|wyse-325 43 lines,
9576 lh@, lines#43, lw@, nlab@,
9579 # lines 43 columns 132
9581 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9582 lh@, lines#43, lw@, nlab@,
9583 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9585 # lines 43 columns 132 vb
9587 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9590 # Wyse 370 -- 24 line screen with status line.
9592 # The terminal may have to be set for 8 data bits and 2 stop
9593 # bits for the arrow keys to work.
9595 # If you change keyboards the terminal will send different
9597 # The following definition is for the basic terminal without
9600 # <u0> -> enter Tektronix 4010/4014 mode
9601 # <u1> -> exit Tektronix 4010/4014 mode
9602 # <u2> -> enter ASCII mode (from any ANSI mode)
9603 # <u3> -> exit ASCII mode (goto native ANSI mode)
9604 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9605 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
9607 # Bug: The <op> capability resets attributes.
9608 wy370-nk|wyse 370 without function keys,
9609 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9610 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9611 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9612 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9613 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9614 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9615 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9616 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9617 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9618 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9619 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9620 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9621 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9622 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9623 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9625 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9626 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9627 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9628 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9630 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9631 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9632 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9633 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9634 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9635 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9636 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9637 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9638 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9639 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9640 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9641 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9643 # Function key set for the ASCII (wy-50 compatible) keyboard
9644 # This is the default 370.
9646 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9647 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9648 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9649 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9650 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9651 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9652 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9653 knp=\E[U, kpp=\E[V, use=wy370-nk,
9655 # Function key set for the VT-320 (and wy85) compatible keyboard
9657 wy370-105k|Wyse 370 with 105 key keyboard,
9658 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9659 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9660 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9661 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9662 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9663 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9664 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9665 use=wy370-nk, use=vt220+keypad,
9667 # Function key set for the PC compatible keyboard
9669 wy370-EPC|Wyse 370 with 102 key keyboard,
9670 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9671 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9672 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9673 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9674 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9676 # Wyse 370 with visual bell.
9677 wy370-vb|Wyse 370 with visible bell,
9680 # Wyse 370 in 132-column mode.
9681 wy370-w|Wyse 370 in 132-column mode,
9683 rs2=\E[35h\E[?3h$<70>, use=wy370,
9685 # Wyse 370 in 132-column mode with visual bell.
9686 wy370-wvb|Wyse 370 with visible bell 132-columns,
9687 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9688 wy370-rv|Wyse 370 reverse video,
9689 rs3=\E[32h\E[?5h, use=wy370,
9691 # Wyse 99gt Tektronix 4010/4014 emulator,
9693 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9696 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9697 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9699 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9701 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9702 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9704 # Wyse 160 Tektronix 4010/4014 emulator,
9706 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9707 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9708 home=^]8`g @\037, use=wy99gt-tek,
9710 # Wyse 370 Tektronix 4010/4014 emulator,
9712 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9715 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9716 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9718 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9720 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9721 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9722 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9724 # Vendor-supplied Wyse entries end here.
9727 #TITLE: TERMINFO ENTRY WY520
9729 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9730 # BBS with the addition of more function keys and special keys.
9732 # rs1 -> set personality
9733 # rs2 -> set number of columns
9734 # rs3 -> set number of lines
9735 # is1 -> select the proper font
9736 # is2 -> do the initialization
9737 # is3 -> If this string is empty then rs3 gets sent.
9739 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9740 # - The BS key is programmed to generate BS in smcup since
9741 # is2 doesn't seem to work.
9742 # - Remove and shift/Remove: delete a character
9743 # - Insert : enter insert mode
9744 # - Find : delete to end of file
9745 # - Select : clear a line
9746 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9748 # - Bottom status line (host writable line) is used.
9749 # - smkx,rmkx are removed because this would put the numeric
9750 # keypad in Dec application mode which doesn't seem to work
9751 # with SCO applications.
9753 wy520|wyse520|wyse 520,
9754 am, hs, km, mc5i, mir, xenl, xon,
9755 cols#80, it#8, lines#24, wsl#80,
9756 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9757 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9758 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9759 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9760 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9761 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9762 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9763 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9764 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9765 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9766 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9767 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9768 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9769 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9770 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9771 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9772 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9773 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9774 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9775 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9776 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9777 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9778 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9779 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9780 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9781 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9782 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9783 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9784 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9785 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9786 vpa=\E[%i%p1%dd, use=vt220+keypad,
9788 # Wyse 520 with 24 data lines and status (terminal status)
9789 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9791 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9794 # Wyse 520 with visual bell.
9795 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9796 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9798 # Wyse 520 in 132-column mode.
9799 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9801 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9802 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9804 # Wyse 520 in 132-column mode with visual bell.
9805 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9806 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9809 # Wyse 520 emulating a vt420 7 bit mode.
9810 # The DEL key is programmed to generate BS in is2.
9811 # With EPC keyboard.
9812 # - 'End' key will clear till end of line on EPC keyboard
9813 # - Shift/End : ignored.
9814 # - Insert : enter insert mode.
9815 # - Delete : delete a character (have to change interrupt character
9816 # to CTRL-C: stty intr '^c') for it to work since the
9817 # Delete key sends 7FH.
9818 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9819 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9820 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9823 # Wyse 520 with 24 data lines and status (terminal status)
9824 # with EPC keyboard.
9825 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9827 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9830 # Wyse 520 with visual bell.
9831 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9832 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9834 # Wyse 520 in 132-column mode.
9835 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9837 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9838 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9840 # Wyse 520 in 132-column mode with visual bell.
9841 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9842 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9844 # Wyse 520 in 80-column, 36 lines
9845 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9848 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9851 # Wyse 520 in 80-column, 48 lines
9852 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9855 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9858 # Wyse 520 in 132-column, 36 lines
9859 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9862 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9865 # Wyse 520 in 132-column, 48 lines
9866 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9869 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9873 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9874 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9877 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9880 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9881 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9884 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9887 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9888 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9891 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9894 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9895 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9898 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9901 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9902 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9903 # file and we don't know what <hts> is -- esr)
9904 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9906 cols#80, it#8, lines#24,
9907 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9908 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9909 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9910 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9911 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9912 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9915 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9916 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9917 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9918 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9921 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9922 wy100q|Wyse 100 for Quotron,
9924 cols#80, lines#24, xmc#1,
9925 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9926 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9927 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9928 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9929 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9931 #### Kermit terminal emulations
9933 # Obsolete Kermit versions may be listed in the section describing obsolete
9934 # non-ANSI terminal emulators later in the file.
9937 # KERMIT standard all versions.
9938 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9939 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9940 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9941 kermit|standard kermit,
9944 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9945 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9946 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9947 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9948 kermit-am|standard kermit plus auto-margin,
9950 is2=K1 Standard Kermit plus Automatic Margins\n,
9953 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9954 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9956 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9957 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9960 clear=\EH\EJ, ed@, el@,
9961 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9963 # Cannot use line 25, now acts funny like ansi special scrolling region.
9964 # Initialization must escape from that region by cursor position to line 24.
9965 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9966 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9967 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9968 pckermit120|UCB IBMPC Kermit 1.20,
9970 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9972 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9973 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9974 # MS-DOS Kermit 2.27 for the IBMPC
9975 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9976 # Cannot use line 25, now acts funny like ansi special scrolling region.
9977 # Initialization must escape from that region by cursor position to line 24.
9978 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9979 # Reverse video for standout like H19.
9980 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9981 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9982 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9984 cols#80, it#8, lines#24,
9985 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9986 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9987 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9988 home=\EH, ht=^I, il1=\EL,
9989 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9990 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9991 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9992 # MS-DOS Kermit 2.27 with automatic margins
9993 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9994 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9996 cvvis=\EO\Eq\EG\EvK5,
9997 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9999 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
10000 # Automatic margins now default. Use ansi <sgr> for highlights.
10001 # Define function keys.
10002 # (msk22714: removed obsolete ":kn#10:" -- esr)
10003 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10004 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
10006 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
10007 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
10008 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
10009 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10010 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
10011 # This was designed for a VT320 emulator, but it is probably a good start
10012 # at support for the VT320 itself.
10013 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
10014 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
10015 vt320-k3|MS-Kermit 3.00's vt320 emulation,
10016 am, eslok, hs, km, mir, msgr, xenl,
10017 cols#80, it#8, lines#49, pb#9600, vt#3,
10018 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10019 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10020 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
10021 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10022 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10023 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10024 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10025 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
10026 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
10027 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10028 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10029 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
10030 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
10031 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10032 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
10033 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
10034 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
10035 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
10036 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
10037 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
10038 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10039 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
10040 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
10041 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
10042 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
10043 vt320-k311|dec vt320 series as defined by kermit 3.11,
10044 am, eslok, hs, mir, msgr, xenl, xon,
10045 cols#80, it#8, lines#24, vt#3,
10046 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10047 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10048 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
10049 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10050 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10051 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10052 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10053 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10054 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10055 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10056 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10057 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10058 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10059 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10060 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10061 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10062 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10063 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10064 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10065 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10067 ######## NON-ANSI TERMINAL EMULATIONS
10072 # These entries attempt to describe Avatar, a terminal emulation used with
10073 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10074 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10075 # excessively dependent on PC idiosyncracies, but apparently rather popular
10076 # in the BBS world.
10078 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10079 # models that terminfo knows about. An Avatar color attribute is the
10080 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10082 # I wrote these entries while looking at the Avatar spec. I don't have
10083 # the facilities to test them. Let me know if they work, or don't.
10085 # Avatar escapes not used by these entries (because maybe you're smarter
10086 # and more motivated than I am and can figure out how to wrap terminfo
10087 # around some of them, and because they are weird enough to be funny):
10089 # ^L -- clear window/reset current attribute to default
10090 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10092 # bit: 6 5 4 3 2 1 0
10094 # +---+---+ | +---+---+
10096 # | | foreground color
10097 # | foreground intensity
10100 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10101 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10102 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10103 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10104 # (^V^L and ^V^M set the current attribute as a side-effect.)
10105 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10106 # in the pattern, <c> the number of times the pattern
10107 # should be repeated. If either value is 0, no-op.
10108 # The pattern can contain Avatar console codes,
10109 # including other ^V ^Y patterns.
10111 # ^V^O -- clockwise mode on; turn print direction right each time you
10112 # hit a window edge (yes, really). Turned off by CR
10114 # ^V^Q%c -- query the driver
10115 # ^V^R -- driver reset
10116 # ^V^S -- Sound tone (PC-specific)
10117 # ^V^T -- change highlight at current cursor poition to %c
10118 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10119 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10122 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10123 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10124 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10125 # which is the only method that will actually work for multiple highlights.)
10127 # Update by TD - 2004: half of this was inconsistent. Found documentation
10128 # and repaired most of the damage. sgr0 is probably incorrect, but the
10129 # available documentation gives no clues for a workable string.
10130 avatar0|avatar terminal emulator level 0,
10132 cols#80, it#8, lines#25,
10133 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10134 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10135 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10137 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10138 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10140 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10141 avatar0+|avatar terminal emulator level 0+,
10142 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10143 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10144 avatar|avatar1|avatar terminal emulator level 1,
10145 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10146 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10150 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10151 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10152 # '90s), especially in the BBS world, and still has some loyal users due to
10153 # its very small memory footprint and to a cute macro language.
10154 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10155 am, bw, mir, msgr, xenl,
10156 cols#80, it#8, lines#25,
10157 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10158 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10159 cub1=^H, cud1=^C, cuf1=^B,
10160 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10161 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10162 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10163 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10164 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10165 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10166 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10167 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10168 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10169 rbcomm-nam|IBM PC with RBcomm without autowrap,
10171 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10172 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10173 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10174 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10176 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10177 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10178 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10180 ######## LCD DISPLAYS
10183 #### Matrix Orbital
10184 # from: Eric Z. Ayers (eric@ale.org)
10186 # Matrix Orbital 20x4 LCD display
10187 # Command Character is 0xFE (decimal 254, octal 376)
10189 # On this device, cursor addressability isn't possible. The LCD expects:
10190 # 0xfe G <col> <row>
10191 # for cup: %p1 == row and %p2 is column
10194 # cup=\376G%p2%c%p1%c
10195 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10196 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10198 # Alas, there is no cursor upline capability on this display.
10200 # These entries add some 'sanity stuff' to the clear function. That is, it
10201 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10202 # and turns off the cursor blinking and stuff like that.
10204 # NOTE: calling 'beep' turns on the backlight (bell)
10205 # NOTE: calling 'flash' turns it on and back off (visual bell)
10207 MtxOrb|Generic Matrix Orbital LCD display,
10208 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10209 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10210 flash=\376B\001$<200>\376F, home=\376H,
10211 MtxOrb204|20x4 Matrix Orbital LCD display,
10212 cols#20, lines#4, use=MtxOrb,
10213 MtxOrb162|16x2 Matrix Orbital LCD display,
10214 cols#16, lines#2, use=MtxOrb,
10217 ######## OLDER TERMINAL TYPES
10219 # This section is devoted to older commercial terminal brands that are now
10220 # discontinued, but known to be still in use or represented by emulations.
10223 #### AT&T (att, tty)
10225 # This section also includes Teletype-branded VDTs.
10227 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
10228 # Boundless Technologies); for details, see the header comment on the ADDS
10231 # These are AT&T's official terminfo entries. All-caps aliases have been
10234 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
10235 am, eo, mir, msgr, xon,
10236 cols#80, it#8, lines#24,
10237 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
10238 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10239 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10240 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10241 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10242 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10243 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10244 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
10245 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
10246 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
10247 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
10248 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10249 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
10251 att2350|AT&T 2350 Video Information Terminal 80 column mode,
10252 mc0@, mc4@, mc5@, use=att2300,
10254 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10255 # Seems upward compatible with vt100, plus ins/del line/char.
10256 # On sgr, the protection parameter is ignored.
10257 # No check is made to make sure that only 3 parameters are output.
10258 # standout= reverse + half-intensity = 3 | 5.
10259 # bold= reverse + underline = 2 | 3.
10260 # note that half-bright blinking doesn't look different from normal blinking.
10261 # NOTE:you must program the function keys first, label second!
10262 # (att4410: a BSD entry has been seen with the following capabilities:
10263 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
10264 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
10265 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
10266 am, hs, mir, msgr, xon,
10267 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10268 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10269 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
10270 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
10271 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
10272 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
10273 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
10274 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
10275 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10276 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
10277 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
10278 ll=\E[24H, nel=^M^J,
10279 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
10280 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10281 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10283 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10284 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10285 tsl=\E7\E[25;%p1%{1}%+%dH,
10287 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
10289 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10291 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
10293 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
10296 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
10298 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10300 # 5410 in terms of a vt100
10301 # (v5410: added <rmam>/<smam> based on init string -- esr)
10302 v5410|att5410 in terms of a vt100,
10303 am, mir, msgr, xon,
10304 cols#80, it#8, lines#24, vt#3,
10305 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10306 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10307 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10308 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
10309 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
10310 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
10311 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
10312 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10313 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
10314 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
10315 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10317 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
10318 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10319 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10323 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
10324 # even! the 5420 has three modes: scroll, window or page mode
10325 # this terminfo should work in scroll or window mode, but doesn't
10326 # take advantage of any of the differences between them.
10328 # Has memory below (2 lines!)
10329 # 3 pages of memory (plus some spare)
10330 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
10331 # <hpa>, <hts> would work for these, but these work in both scroll and window
10332 # mode... Unset insert character so insert mode works
10333 # <is1> sets 80 column mode,
10334 # <is2> escape sequence:
10335 # 1) turn off all fonts
10336 # 2) function keys off, keyboard lock off, control display off,
10337 # insert mode off, erasure mode off,
10338 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
10339 # 4) reset origin mode
10340 # 5) set line wraparound
10341 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
10343 # 8) program ENTER to transmit ^J,
10344 # We use \212 to program the ^J because a bare ^J will get translated by
10345 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10347 # <is3> set screen color to black,
10348 # No representation in terminfo for the delete word key: kdw1=\Ed
10349 # Key capabilities assume the power-up send sequence...
10350 # This <rmcup> is not strictly necessary, but it helps maximize
10351 # memory usefulness: <rmcup=\Ez>,
10352 # Alternate sgr0: <sgr0=\E[m\EW^O>,
10353 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
10354 # smkx programs the SYS PF keys to send a set sequence.
10355 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
10356 # This string causes them to send the strings <kf1>-<kf8>
10357 # when pressed in SYS PF mode.
10358 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
10359 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
10360 OTbs, db, mir, xon,
10361 lh#2, lm#78, lw#8, nlab#8, wsl#55,
10362 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
10363 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
10364 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
10365 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
10366 flash=\E[?5h$<200>\E[?5l, home=\E[x,
10367 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
10368 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
10369 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
10370 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
10371 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
10372 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10373 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10374 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10375 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
10376 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
10377 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
10378 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
10379 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
10380 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
10381 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10382 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
10383 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
10384 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10387 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
10388 cols#132, lm#54, wsl#97,
10389 is1=\E[?3h$<100>, use=att4415,
10391 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
10392 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10394 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
10395 cols#132, lm#54, wsl#97,
10396 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
10399 # Note that this mode permits programming USER PF KEYS and labels
10400 # However, when you program user pf labels you have to reselect
10401 # user pf keys to make them appear!
10402 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
10403 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
10404 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
10405 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
10407 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
10408 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10411 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
10412 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10415 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
10416 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10419 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
10420 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10423 att5420_2|AT&T 5420 model 2 80 cols,
10424 am, db, hs, mir, msgr, xon,
10425 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10426 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10427 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
10428 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10429 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
10430 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
10431 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10432 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
10433 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10434 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
10435 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10436 indn=\E[%p1%dE, invis=\E[8m,
10437 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10438 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
10439 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
10440 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
10441 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
10442 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10443 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10444 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
10445 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
10446 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
10447 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
10448 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
10449 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10451 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10452 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
10453 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10454 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10455 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
10457 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10460 att4418|att5418|AT&T 5418 80 cols,
10463 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10464 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
10465 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10466 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10467 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
10468 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
10469 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
10470 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
10471 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
10472 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
10473 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
10474 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
10475 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
10476 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
10477 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10478 att4418-w|att5418-w|AT&T 5418 132 cols,
10480 is1=\E[?3h, use=att5418,
10482 att4420|tty4420|teletype 4420,
10483 OTbs, da, db, eo, msgr, ul, xon,
10484 cols#80, lines#24, lm#72,
10485 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10486 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10487 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10488 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10489 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10490 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10491 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10492 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10494 # The following is a terminfo entry for the Teletype 4424
10495 # asynchronous keyboard-display terminal. It supports
10496 # the vi editor. The terminal must be set up as follows,
10498 # HIGHLIGHT DEFINITION 3-TONE
10499 # DISPLAY FUNCTION GROUP III
10501 # The second entry below provides limited (a la adm3a)
10502 # operation under GROUP II.
10504 # This must be used with DISPLAY FUNCTION GROUP I or III
10505 # and HIGHLIGHT DEFINITION 3-TONE
10506 # The terminal has either bold or blink, depending on options
10508 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10509 att4424|tty4424|teletype 4424,
10512 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10513 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10514 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10515 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10516 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10517 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10518 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10519 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10520 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10521 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10522 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10524 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10525 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10528 att4424-1|tty4424-1|teletype 4424 in display function group I,
10529 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10532 # This entry is not one of AT&T's official ones, it was translated from the
10533 # 4.4BSD termcap file. The highlight strings are different from att4424.
10534 # I have no idea why this is -- older firmware version, maybe?
10535 # The following two lines are the comment originally attached to the entry:
10536 # This entry appears to avoid the top line - I have no idea why.
10537 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10538 att4424m|tty4424m|teletype 4424M,
10540 cols#80, it#8, lines#23,
10541 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10542 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10543 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10544 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10545 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10546 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10547 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10549 # The Teletype 5425 is really version 2 of the Teletype 5420. It
10550 # is quite similar, except for some minor differences. No page
10551 # mode, for example, so all of the <cup> sequences used above have
10552 # to change back to what's being used for the 5410. Many of the
10553 # option settings have changed their numbering as well.
10555 # This has been tested on a preliminary model.
10557 # (att5425: added <rmam>/<smam> based on the init string -- esr)
10558 att5425|tty5425|att4425|AT&T 4425/5425,
10559 am, da, db, hs, mir, msgr, xenl, xon,
10560 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10561 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10562 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10563 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10564 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10565 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10566 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10567 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10568 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10569 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10570 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10571 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10572 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10573 invis=\E[8m, is1=\E<\E[?3l$<100>,
10574 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10575 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10576 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10577 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10578 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10579 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10580 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10582 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10583 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10584 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10585 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10586 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10587 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10588 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10589 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10590 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10591 vpa=\E[%p1%{1}%+%dd,
10593 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10594 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10596 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10597 cols#132, lm#54, wsl#97,
10598 is1=\E[?3h$<100>, use=tty5425,
10600 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10601 # I also added <rmam>/<smam> -- esr)
10602 att4426|tty4426|teletype 4426S,
10604 cols#80, lines#24, lm#48,
10605 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10606 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10607 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10608 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10609 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
10610 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10611 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10612 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10613 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10614 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10615 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10616 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10617 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10618 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10619 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10620 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10623 # Terminfo entry for the AT&T 510 A Personal Terminal
10624 # Function keys 9 - 16 are available only after the
10625 # screen labeled (soft keys/action blocks) are labeled. Function key
10626 # 9 corresponds to the leftmost touch target on the screen,
10627 # function key 16 corresponds to the rightmost.
10629 # This entry is based on one done by Ernie Rice at Summit, NJ and
10630 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
10631 att510a|bct510a|AT&T 510A Personal Terminal,
10632 am, mir, msgr, xenl, xon,
10633 cols#80, lh#2, lines#24, lw#7, nlab#8,
10634 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10635 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10636 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10637 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10638 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10639 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10640 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10641 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10642 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10643 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10644 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10645 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10646 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10647 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10648 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10649 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10650 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10651 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10652 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10653 smul=\E[4m, tbc=\E[3g,
10655 # Terminfo entry for the AT&T 510 D Personal Terminal
10656 # Function keys 9 through 16 are accessed by bringing up the
10658 # Function key 9 corresponds to the leftmost touch target on the screen,
10659 # function key 16 corresponds to the rightmost.
10661 # There are problems with soft key labeling. These are due to
10662 # strangenesses in the native terminal that are impossible to
10663 # describe in a terminfo.
10664 att510d|bct510d|AT&T 510D Personal Terminal,
10665 am, da, db, mir, msgr, xenl, xon,
10666 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10667 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10668 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10669 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10670 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10671 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10672 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10673 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10674 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10675 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10676 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10677 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10678 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10679 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10680 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10681 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10682 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10683 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10684 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10685 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10686 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10687 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10688 rs2=\E[5;0|, sc=\E7,
10689 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10690 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10691 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10692 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10694 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10695 att500|att513|AT&T 513 using page mode,
10696 am, chts, mir, msgr, xenl, xon,
10697 cols#80, lh#2, lines#24, lw#8, nlab#8,
10698 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10699 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10700 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10701 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10702 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10703 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10704 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10705 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10706 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10707 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10708 indn=\E[%p1%dE, invis=\E[8m,
10709 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10710 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10711 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10712 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10713 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10714 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10715 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10716 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10717 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10718 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10719 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10720 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10721 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10722 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10723 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10724 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10725 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10726 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10728 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10729 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10730 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10731 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10732 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10733 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10734 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10736 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10737 rs2=\E[5;0|, sc=\E7,
10738 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10739 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10740 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10741 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10744 # printer must be set to EMUL ANSI to accept ESC codes
10745 # <cuu1> stops at top margin
10746 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10747 # and alt font ascii,wrap on,tabs cleared
10748 # <is2> disables newline on LF,Emphasized off
10749 # The <u0> capability sets form length
10750 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10752 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10753 orhi#100, orl#12, orvi#72,
10754 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10756 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10757 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10758 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10759 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10761 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10762 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10763 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10764 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10766 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10767 # The following SET-UP modes are assumed for normal operation:
10768 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10769 # Other SET-UP modes may be set for operator convenience or communication
10770 # requirements. This termcap description is for the Resident Terminal Mode.
10771 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10772 # The BRL entry also said: UNSAFE :ll=\E[70H:
10773 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10775 cols#88, it#8, lines#70, vt#3,
10776 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10777 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10778 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10779 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10780 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10781 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10782 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10785 # 5620 terminfo (2.0 or later ROMS with char attributes)
10786 # The following SET-UP modes are assumed for normal operation:
10787 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10788 # Other SET-UP modes may be set for operator convenience or communication
10789 # requirements. This termcap description is for Resident Terminal Mode. No
10790 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10791 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10792 # Be aware that older versions of the dmd have a firmware bug that affects
10793 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10794 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10795 # also has <ll>=\E[70H commented out and marked unsafe.
10796 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10797 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10798 OTbs, am, msgr, npc, xon,
10799 cols#88, it#8, lines#70,
10800 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10801 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10802 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10803 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10804 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10805 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10806 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10807 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10808 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10809 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10810 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10811 lines#24, use=att5620,
10812 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10813 lines#34, use=att5620,
10814 # 5620 layer running the "S" system's downloaded graphics handler:
10815 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10817 cols#80, it#8, lines#72,
10818 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10819 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10820 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10821 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10824 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10826 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10827 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10828 att605|AT&T 605 80 column 102key keyboard,
10830 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10831 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10832 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10833 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10834 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10835 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10836 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10837 il1=\E[L, ind=^J, invis=\E[8m,
10838 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10839 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10840 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10841 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10842 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10843 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10844 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10845 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10846 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10847 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10848 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10849 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10850 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10851 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10852 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10853 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10854 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10855 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10856 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10857 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10858 tsl=\E7\E[25;%i%p1%dx,
10859 att605-pc|ATT 605 in pc term mode,
10860 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10861 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10862 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10863 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10864 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10865 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10866 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10867 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10868 xonc=e, use=att605,
10869 att605-w|AT&T 605-w 132 column 102 key keyboard,
10871 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10873 # (att610: I added <rmam>/<smam> based on the init string. I also
10874 # added <indn> and <rin> because the BSD file says the att615s have them,
10875 # and the 615 is like a 610 with a big keyboard, and most of their other
10876 # smart terminals support the same sequence -- esr)
10877 att610|AT&T 610; 80 column; 98key keyboard,
10878 am, eslok, hs, mir, msgr, xenl, xon,
10879 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10880 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10881 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10882 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10883 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10884 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10885 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10886 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10887 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10888 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10889 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10890 indn=\E[%p1%dS, invis=\E[8m,
10891 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10892 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10893 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10894 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10895 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10896 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10897 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10899 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10900 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10901 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10902 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10903 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10904 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10905 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10906 att610-w|AT&T 610; 132 column; 98key keyboard,
10908 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10911 att610-103k|AT&T 610; 80 column; 103key keyboard,
10912 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10913 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10914 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10915 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10916 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10917 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10918 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10919 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10920 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10921 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10922 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10923 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10924 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10925 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10927 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10929 att615|AT&T 615; 80 column; 98key keyboard,
10930 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10931 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10932 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10933 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10934 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10935 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10936 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10937 att615-w|AT&T 615; 132 column; 98key keyboard,
10938 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10939 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10940 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10941 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10942 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10943 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10944 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10945 att615-103k|AT&T 615; 80 column; 103key keyboard,
10946 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10947 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10948 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10949 # (att620: I added <rmam>/<smam> based on the init string and
10950 # <rin>/<indn> from a BSD termcap -- esr)
10951 att620|AT&T 620; 80 column; 98key keyboard,
10952 am, eslok, hs, mir, msgr, xenl, xon,
10953 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10954 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10955 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10956 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10957 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10958 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10960 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10961 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10962 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10963 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10964 indn=\E[%p1%dS, invis=\E[8m,
10965 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10966 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10967 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10968 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10969 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10970 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10971 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10972 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10973 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10974 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10975 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10976 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10977 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10978 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10979 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10980 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10981 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10982 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10983 rs2=\Ec\E[?3l, sc=\E7,
10984 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
10985 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10986 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10987 tsl=\E7\E[25;%i%p1%dx,
10988 att620-w|AT&T 620; 132 column; 98key keyboard,
10990 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10992 att620-103k|AT&T 620; 80 column; 103key keyboard,
10993 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10994 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10995 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10996 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10997 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10998 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10999 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11000 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
11001 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
11002 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
11003 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
11004 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
11005 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11006 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11007 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
11008 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
11010 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
11012 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11015 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
11016 # The following SETUP modes are assumed for normal operation:
11017 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
11018 # Font_Size=Large Non-Layers_Window_Cols=80
11019 # Non-Layers_Window_Rows=60
11020 # Other SETUP modes may be set for operator convenience or communication
11021 # requirements. Some capabilities assume a printer attached to the Aux EIA
11022 # port. This termcap description is for the Fixed Non-Layers Window. No
11023 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11024 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
11025 att630|AT&T 630 windowing terminal,
11026 OTbs, am, da, db, mir, msgr, npc, xon,
11027 cols#80, it#8, lines#60, lm#0,
11028 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
11029 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11030 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11031 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11032 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11033 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11034 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
11035 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11036 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
11037 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
11038 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
11039 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
11040 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
11041 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
11042 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
11043 rmul=\E[m, rs2=\Ec, sc=\E7,
11044 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
11045 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11046 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
11047 lines#24, use=att630,
11049 # This is the att700 entry for 700 native emulation of the AT&T 700
11050 # terminal. Comments are relative to changes from the 605V2 entry and
11051 # att730 on which the entry is based. Comments show the terminfo
11052 # capability name, termcap name, and description.
11054 # Here is what's going onm in the init string:
11055 # ESC [ 50;4| set 700 native mode (really is 605)
11056 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11057 # ESC [ 53;0| set GenFlow to Xon/Xoff
11058 # ESC [ 8 ;0| set CR on NL
11059 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11060 # ESC [ ? 4 l jump scroll
11061 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11062 # ESC [ ?13 l Labels on
11063 # ESC [ ?15 l parity check = no
11064 # ESC [ 13 l monitor mode off
11065 # ESC [ 20 l LF on NL (not CRLF on NL)
11066 # ESC [ ? 7 h autowrap on
11067 # ESC [ 12 h local echo off
11068 # ESC ( B GO = ASCII
11069 # ESC ) 0 G1 = Special Char & Line Drawing
11070 # ESC [ ? 31 l Set 7 bit controls
11072 # Note: Most terminals, especially the 600 family use Reverse Video for
11073 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11074 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11075 # standout mode with \E[m (all normal attributes). The 730 entry simply
11076 # exits reverse video which would leave other current attributes intact. It
11077 # was assumed the 730 entry to be more correct so rmso has changed. The
11078 # 605V2 has no sequences to turn individual attributes off, thus its setting
11079 # and the rmso/smso settings from the 730.
11081 # Note: For the same reason as above in rmso I changed exit under-score mode
11082 # to specifically turn off underscore, rather than return to all normal
11085 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11086 # capability as pfxl. It was changed here to pfx since pfxl
11087 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11088 # allows strings to be parameters and label values must be programmed as
11089 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11090 # and strings to be parameters. The 605V2 pfx entry should be examined later
11091 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11093 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11094 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11097 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11100 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11102 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11106 # modular 10 pin Connector
11107 # Left side Right side
11108 # Pin 1 2 3 4 5 6 7 8 9 10
11110 # Key (notch) at bottom
11122 # The manual is 189 pages and is loaded with details about the escape codes,
11123 # etc..... Available from AT&T CIC 800-432-6600...
11124 # ask for Document number 999-300-660..
11126 att700|AT&T 700 24x80 column display w/102key keyboard,
11127 am, eslok, hs, mir, msgr, xenl, xon,
11128 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11129 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11130 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11131 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11132 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11133 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11134 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11135 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11136 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11137 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11138 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11139 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11140 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11141 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11142 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11143 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11144 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11145 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11146 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11147 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11148 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11149 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11150 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11151 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11152 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11153 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11154 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11155 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11156 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11157 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11158 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11159 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11160 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11161 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11162 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11163 tsl=\E7\E[99;%i%p1%dx,
11165 # This entry was modified 3/13/90 by JWE.
11166 # fixes include additions of <enacs>, correcting <rep>, and modification
11167 # of <kHOM>. (See comments below)
11168 # att730 has status line of 80 chars
11169 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11170 # the <kf25> and up keys are used for shifted system Fkeys
11171 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11172 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11173 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11174 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11175 # 102, 102+1, or 122 key keyboards
11177 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11178 att730|AT&T 730 windowing terminal,
11179 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11180 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11181 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11182 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11183 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11184 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11185 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11186 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11187 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11188 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11189 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11190 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11191 ind=\ED, invis=\E[8m,
11192 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11193 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11194 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11195 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11196 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11197 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11198 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11199 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11200 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11201 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11202 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11203 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11204 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11205 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11206 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11207 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11208 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11209 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11210 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11211 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11212 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11213 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11214 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11215 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11216 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11217 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
11218 lines#41, use=att730,
11219 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
11220 lines#24, use=att730,
11221 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
11222 flash=\E[?5l$<200>\E[?5h,
11223 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
11225 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
11226 lines#41, use=att730r,
11227 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
11228 lines#24, use=att730r,
11230 # The following represents the screen layout along with the associated
11231 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
11232 # not appear on the screen but are shown to reference the bezel buttons.
11233 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
11234 # position relative to the screen.
11238 # +----------------------------------------------------------------+
11240 # XXXX | kf0 kf24 | XXXX
11243 # XXXX | kf1 kf23 | XXXX
11246 # XXXX | kf2 kf22 | XXXX
11249 # XXXX | kf3 kf21 | XXXX
11252 # XXXX | kf4 kf20 | XXXX
11255 # XXXX | kf5 kf19 | XXXX
11258 # XXXX | kf6 kf18 | XXXX
11264 # +----------------------------------------------------------------+
11266 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
11268 # Note: XXXX represents the screen buttons
11274 # The character string sent by key 'kf26' may be user programmable
11275 # to send either \E[16s, or \E[26s.
11276 # The character string sent by key 'krfr' may be user programmable
11277 # to send either \E[17s, or \E[27s.
11279 # Depression of the "CMD" key sends \E! (kcmd)
11280 # Depression of the "MAIL" key sends \E[26s (kf26)
11281 # "REDRAW" same as "REFRESH" (krfr)
11283 # "kf" functions adds carriage return to output string if terminal is in
11286 # The following are functions not covered in the table above:
11288 # Set keyboard character (SKC): \EPn1;Pn2w
11289 # Pn1= 0 Back Space key
11291 # Pn2= Program char (hex)
11293 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
11294 # Pn1= Window number (1-39)
11295 # Pn2-Pn5= Y;X;Y;X coordinates
11297 # Screen Selection (SSL): \E[Pnu
11298 # Pn= Window number
11300 # Set Terminal Modes (SM): \E[Pnh
11301 # Pn= 3 Graphics mode
11302 # Pn= > Cursor blink
11303 # Pn= < Enter new line mode
11304 # Pn= = Enter reverse insert/replace mode
11305 # Pn= ? Enter no scroll mode
11307 # Reset Terminal Mode (RM): \E[Pnl
11308 # Pn= 3 Exit graphics mode
11309 # Pn= > Exit cursor blink
11310 # Pn= < Exit new line mode
11311 # Pn= = Exit reverse insert/replace mode
11312 # Pn= ? Exit no scroll mode
11314 # Screen Status Report (SSR): \E[Pnp
11315 # Pn= 0 Request current window number
11316 # Pn= 1 Request current window dimensions
11318 # Device Status Report (DSR): \E[6n Request cursor position
11320 # Call Status Report (CSR): \E[Pnv
11321 # Pn= 0 Call failed
11322 # Pn= 1 Call successful
11324 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
11325 # Pn1= Button number to be loaded
11326 # Pn2= Character count of "string"
11327 # Pn3= Key mode being loaded:
11331 # String= Text string (15 chars max)
11333 # Screen Number Report (SNR): \E[Pnp
11334 # Pn= Screen number
11336 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
11337 # Pn1= Number of rows available in window
11338 # Pn2= Number of columns available in window
11340 # Cursor Position Report (CPR): \E[Pn1;Pn2R
11341 # Pn1= "Y" Position of cursor
11342 # Pn2= "X" Position of cursor
11344 # Request Answer Back (RAB): \E[c
11346 # Answer Back Response (ABR): \E[?;*;30;VSV
11347 # *= 0 No printer available
11348 # *= 2 Printer available
11349 # V= Software version number
11350 # SV= Software sub version number
11351 # (printer-available field not documented in v1)
11353 # Screen Alignment Aid: \En
11355 # Bell (lower pitch): \E[x
11357 # Dial Phone Number: \EPdstring\
11358 # string= Phone number to be dialed
11360 # Set Phone Labels: \EPpstring\
11361 # string= Label for phone buttons
11363 # Set Clock: \EPchour;minute;second\
11365 # Position Clock: \EPsY;X\
11366 # Y= "Y" coordinate
11367 # X= "X" coordinate
11369 # Delete Clock: \Epr\
11371 # Programming The Function Buttons: \EPfPn;string\
11372 # Pn= Button number (00-06, 18-24)
11373 # (kf00-kf06, kf18-kf24)
11374 # string= Text to sent on button depression
11376 # The following in version 2 only:
11378 # Request For Local Directory Data: \EPp12;\
11380 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
11382 # Request for Local Directory Data in print format: \EPp13;\
11384 # Enable 'Prt on Line' mode: \022 (DC2)
11386 # Disable 'Prt on Line' mode: \024 (DC4)
11390 # The following Terminfo entry describes functions which are supported by
11391 # the AT&T 5430/pt505 terminal software version 2 and later.
11392 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
11394 cols#80, it#8, lines#24,
11395 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11396 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
11397 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
11398 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11399 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11400 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11401 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
11402 il=\E[%p1%dL, il1=\E[L, ind=^J,
11403 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
11404 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11405 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
11406 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
11407 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
11408 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
11409 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11410 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
11411 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
11412 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
11414 # The following Terminfo entry describes functions which are supported by
11415 # the AT&T 5430/pt505 terminal software version 1.
11416 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
11418 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
11419 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
11420 lines#22, use=att505,
11422 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
11423 # This cut mark helps make life less painful for people running ncurses tic
11424 # on machines with relatively little RAM. The file can be broken in half here
11425 # cleanly and compiled in sections -- no `use' references cross this cut
11429 #### Ampex (Dialogue)
11431 # Yes, these are the same people who are better-known for making audio- and
11432 # videotape. I'm told they are located in Redwood City, CA.
11435 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
11436 # (ampex80: some capabilities merged in from SCO's entry -- esr)
11437 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
11439 cols#80, it#8, lines#24,
11440 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
11441 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11442 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
11443 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
11444 smso=\Ej, smul=\El, tbc=\E3,
11445 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
11446 ampex175|ampex d175,
11449 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11450 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11451 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
11452 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
11453 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
11454 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
11455 # No backspace key in the main QWERTY cluster. Fortunately, it has a
11456 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
11457 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
11458 # mode), this key can be used as the erase key; I find I like this. Because
11459 # some people and some systems may not, there is another termcap ("ampex175")
11460 # that suppresses this little eccentricity by omitting the relevant capability.
11461 ampex175-b|ampex d175 using left arrow for erase,
11462 kbs=^_, use=ampex175,
11463 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
11464 # (ampex210: removed obsolete ":kn#10:" -- esr)
11465 ampex210|a210|ampex a210,
11466 OTbs, am, hs, xenl,
11467 cols#80, it#8, lines#24, xmc#1,
11468 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
11469 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11470 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
11471 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
11472 if=/usr/share/tabset/std, il1=\EE, invis@,
11473 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
11474 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
11475 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
11476 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
11477 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
11478 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
11479 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
11480 # and moved the padding to be *after* the caps -- esr)
11481 ampex219|ampex-219|amp219|Ampex with Automargins,
11483 cols#80, it#8, lines#24,
11484 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
11485 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
11486 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
11487 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
11488 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
11489 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
11490 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11491 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
11492 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
11493 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
11494 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
11495 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
11496 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
11497 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
11498 cols#132, lines#24,
11499 bel=^G, cr=^M, cud1=^J, ind=^J,
11500 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11501 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
11502 ampex232|ampex-232|Ampex Model 232,
11504 cols#80, lines#24, xmc#1,
11505 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
11506 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11507 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
11508 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
11509 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
11510 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
11511 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
11512 kf9=^AI\r, khome=^^, use=adm+sgr,
11513 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
11514 ampex232w|Ampex Model 232 / 132 columns,
11515 cols#132, lines#24,
11516 is2=\E\034Eg\El, use=ampex232,
11518 #### Ann Arbor (aa)
11520 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11521 # numbers of function keys. At least some used monitors in portrait mode,
11522 # allowing up to 76-character screen heights! They were reachable at:
11524 # Ann Arbor Terminals
11525 # 6175 Jackson Road
11526 # Ann Arbor, MI 48103
11529 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
11530 # can't be found on the Web; I fear they're long dead. R.I.P.
11534 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
11535 # Highly modified 6/22 by Mike O'Brien.
11536 # split out into several for the various screen sizes by dave-yost@rand
11537 # Modifications made 3/82 by Mark Horton
11538 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
11539 # status line moved to top of screen, <flash> removed 5/82
11540 # Some unknown person at SCO then hacked the init strings to make them more
11543 # assumes the following setup:
11544 # A menu: 0000 1010 0001 0000
11545 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11546 # C menu: 56 66 0 0 9600 0110 1100
11547 # D menu: 0110 1001 1 0
11549 # Briefly, the settings are for the following modes:
11550 # (values are for bit set/clear with * indicating our preference
11551 # and the value used to test these termcaps)
11552 # Note that many of these settings are irrelevent to the terminfo
11553 # and are just set to the default mode of the terminal as shipped
11556 # A menu: 0000 1010 0001 0000
11557 # Block/underline cursor*
11558 # blinking/nonblinking cursor*
11559 # key click/no key click*
11560 # bell/no bell at column 72*
11562 # key pad is cursor control*/key pad is numeric
11563 # return and line feed/return for <cr> key *
11564 # repeat after .5 sec*/no repeat
11565 # repeat at 25/15 chars per sec. *
11567 # hold data until pause pressed/process data unless pause pressed*
11568 # slow scroll/no slow scroll*
11569 # Hold in area/don't hold in area*
11570 # functions keys have default*/function keys disabled on powerup
11572 # show/don't show position of cursor during page transmit*
11577 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11578 # Baud rate (9600*)
11580 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
11581 # 1 stop bit*/2 stop bits
11582 # parity error detection off*/on
11584 # keyboard local/on line*
11585 # half/full duplex*
11586 # disable/do not disable keyboard after data transmission*
11588 # transmit entire page/stop transmission at cursor*
11589 # transfer/do not transfer protected characters*
11590 # transmit all characters/transmit only selected characters*
11591 # transmit all selected areas/transmit only 1 selected area*
11593 # transmit/do not transmit line separators to host*
11594 # transmit/do not transmit page tab stops tabs to host*
11595 # transmit/do not transmit column tab stop tabs to host*
11596 # transmit/do not transmit graphics control (underline,inverse..)*
11598 # enable*/disable auto XON/XOFF control
11599 # require/do not require receipt of a DC1 from host after each LF*
11600 # pause key acts as a meta key/pause key is pause*
11608 # XON character (17*)
11609 # XOFF character (19*)
11611 # C menu: 56 66 0 0 9600 0110 1100
11612 # number of lines to print data on (printer) (56*)
11614 # number of lines on a sheet of paper (printer) (66*)
11616 # left margin (printer) (0*)
11618 # number of pad chars on new line to printer (0*)
11620 # printer baud rate (9600*)
11622 # printer parity: 00=odd,01=even*,10=space,11=mark
11623 # printer stop bits: 2*/1
11624 # print/do not print guarded areas*
11626 # new line is: 01=LF,10=CR,11=CRLF*
11630 # D menu: 0110 1001 1 0
11631 # LF is newline/LF is down one line, same column*
11632 # wrap to preceding line if move left from col 1*/don't wrap
11633 # wrap to next line if move right from col 80*/don't wrap
11634 # backspace is/is not destructive*
11636 # display*/ignore DEL character
11637 # display will not/will scroll*
11638 # page/column tab stops*
11639 # erase everything*/erase unprotected only
11641 # editing extent: 0=display,1=line*,2=field,3=area
11646 annarbor4080|aa4080|ann arbor 4080,
11649 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11650 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11651 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11652 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11654 # Strange Ann Arbor terminal from BRL
11655 aas1901|Ann Arbor K4080 w/S1901 mod,
11658 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11659 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11662 # If you're using the GNU termcap library, add
11663 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11664 # to these capabilities. This is the nonstandard GNU termcap scrolling
11665 # capability, arguments are:
11666 # 1. Total number of lines on the screen.
11667 # 2. Number of lines above desired scroll region.
11668 # 3. Number of lines below (outside of) desired scroll region.
11669 # 4. Total number of lines on the screen, the same as the first parameter.
11670 # The generic Ann Arbor entry is the only one that uses this.
11671 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11672 OTbs, am, km, mc5i, mir, xon,
11674 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11675 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11676 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11677 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11678 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11679 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11680 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11681 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11682 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11683 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11684 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11685 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11686 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11687 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11688 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11689 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11690 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11691 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11692 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11693 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11694 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11696 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11697 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11698 vpa=\E[%p1%{1}%+%dd,
11700 aaa+rv|ann arbor ambassador in reverse video,
11701 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11702 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11703 rs1=\E[H\E[7m\E[J$<156>,
11704 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
11705 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11706 # Ambassador with the DEC option, for partial vt100 compatibility.
11707 aaa+dec|ann arbor ambassador in dec vt100 mode,
11708 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11709 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11710 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11712 aaa-18|ann arbor ambassador/18 lines,
11714 is2=\E7\E[60;0;0;18p\E8,
11715 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11717 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11718 use=aaa+rv, use=aaa-18,
11719 aaa-20|ann arbor ambassador/20 lines,
11721 is2=\E7\E[60;0;0;20p\E8,
11722 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11724 aaa-22|ann arbor ambassador/22 lines,
11726 is2=\E7\E[60;0;0;22p\E8,
11727 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11729 aaa-24|ann arbor ambassador/24 lines,
11731 is2=\E7\E[60;0;0;24p\E8,
11732 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11734 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11735 use=aaa+rv, use=aaa-24,
11736 aaa-26|ann arbor ambassador/26 lines,
11738 is2=\E7\E[60;0;0;26p\E8,
11739 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11740 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11741 aaa-28|ann arbor ambassador/28 lines,
11743 is2=\E7\E[60;0;0;28p\E8,
11744 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11745 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11746 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11749 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11750 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11751 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11752 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11753 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11754 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11755 use=aaa+rv, use=aaa-30-s,
11756 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11757 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11758 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11759 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11760 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11761 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11762 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11764 is2=\E7\E[60;0;0;30p\E8,
11765 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11766 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11767 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11768 use=aaa+rv, use=aaa-30,
11769 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11770 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11772 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11773 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11774 use=aaa+rv, use=aaa-30,
11775 aaa-36|ann arbor ambassador/36 lines,
11777 is2=\E7\E[60;0;0;36p\E8,
11778 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11779 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11780 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11781 use=aaa+rv, use=aaa-36,
11782 aaa-40|ann arbor ambassador/40 lines,
11784 is2=\E7\E[60;0;0;40p\E8,
11785 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11786 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11787 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11788 use=aaa+rv, use=aaa-40,
11789 aaa-48|ann arbor ambassador/48 lines,
11791 is2=\E7\E[60;0;0;48p\E8,
11792 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11793 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11794 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11795 use=aaa+rv, use=aaa-48,
11796 aaa-60-s|ann arbor ambassador/59 lines+status,
11799 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11800 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11801 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11802 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11803 use=aaa+rv, use=aaa-60-s,
11804 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11805 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11806 aaa-60|ann arbor ambassador/60 lines,
11808 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11810 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11811 use=aaa+rv, use=aaa-60,
11812 aaa-db|ann arbor ambassador 30/destructive backspace,
11814 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11816 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11818 flash=\E[>59h$<100>\E[>59l,
11819 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11820 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11821 guru+rv|guru changes for reverse video,
11822 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11823 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11824 use=guru+rv, use=guru-33,
11825 guru+s|guru status line,
11827 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11828 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11829 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11830 guru-nctxt|guru with no saved context,
11831 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11832 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11834 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11835 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11836 guru-24|ann arbor guru 24 lines,
11838 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11840 guru-44|ann arbor guru 44 lines,
11842 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11844 guru-44-s|ann arbor guru/44 lines+status,
11846 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11847 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11848 guru-76|guru with 76 lines by 89 cols,
11850 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11852 guru-76-s|ann arbor guru/76 lines+status,
11854 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11855 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11856 guru-76-lp|guru-lp|guru with page bigger than line printer,
11857 cols#134, lines#76,
11858 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11860 guru-76-w|guru 76 lines by 178 cols,
11861 cols#178, lines#76,
11862 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11864 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11865 cols#178, lines#75,
11866 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11867 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11868 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11869 cols#178, lines#76,
11870 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11872 aaa-rv-unk|ann arbor unknown type,
11873 lh#0, lw#0, nlab#0,
11874 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11875 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11877 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
11878 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11880 #### Applied Digital Data Systems (adds)
11882 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11883 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11884 # terminals was merged again. Then AT&T sold the terminal business to
11885 # SunRiver, which later changed its name to Boundless Technologies. The
11886 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11887 # as of early 1995) are at:
11889 # Boundless Technologies
11890 # 100 Marcus Boulevard
11891 # Hauppauge, NY 11788-3762
11892 # Vox: (800)-231-5445
11893 # Fax: (516)-342-7378
11894 # Web: http://boundless.com
11896 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11897 # In 1995 Boundless acquired DEC's terminals business.
11900 # Regent: lowest common denominator, works on all regents.
11901 # (regent: renamed ":bc:" to ":le:" -- esr)
11902 regent|Adds Regent Series,
11905 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11906 home=\EY\s\s, ind=^J, ll=^A,
11907 # Regent 100 has a bug where if computer sends escape when user is holding
11908 # down shift key it gets confused, so we avoid escape.
11909 regent100|Adds Regent 100,
11912 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11913 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11914 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11915 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11916 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11917 regent20|Adds Regent 20,
11918 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11920 regent25|Adds Regent 25,
11921 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11923 regent40|Adds Regent 40,
11925 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11926 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11927 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11928 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11929 smul=\E0`, use=regent25,
11930 regent40+|Adds Regent 40+,
11931 is2=\EB, use=regent40,
11932 regent60|regent200|Adds Regent 60,
11933 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11934 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11936 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11937 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11938 viewpoint|addsviewpoint|adds viewpoint,
11941 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11942 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11943 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11944 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11945 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11946 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11947 # Some viewpoints have bad ROMs that foo up on ^O
11948 screwpoint|adds viewpoint with ^O bug,
11949 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11951 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11952 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11953 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11954 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11955 # invis=01000100 and %c is the logical or of desired attributes.
11956 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11958 # Update by TD - 2004:
11960 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11962 # COMMANDS ASCII CODE
11964 # Address, Absolute ESC,=,row,column
11966 # Aux Port Enable ESC,@
11967 # Aux Port Disable ESC,A
11971 # Cursor forward FF
11974 # Cursor supress ETB
11975 # Cursor enable CAN
11976 # Erase to end of line ESC,T
11977 # Erase to end of page ESC,Y
11980 # Keyboard unlock SO
11981 # Read current cursor position ESC,?
11982 # Set Attribute ESC,0,x (see below for values of x)
11983 # Tag bit reset ESC,(
11984 # Tag bit set ESC,)
11985 # Transparent Print on ESC,3
11986 # Transparent Print off ESC,4
11992 # Half Intensity A 0101
11994 # Half Intensity Blinking C 0103
11995 # Reverse Video P 0120
11996 # Reverse Video Half Intensity Q 0121
11997 # Reverse Video Blinking R 0122
11998 # Reverse Video Half Intensity
12000 # Underlined ` 0140
12001 # Underlined Half Intensity a 0141
12002 # Underlined Blinking b 0142
12003 # Underlined Half Intensity
12005 # Video suppress D 0104
12006 vp3a+|viewpoint3a+|adds viewpoint 3a+,
12008 cols#80, it#8, lines#24,
12009 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
12010 cub1=^H, cud1=^J, cuf1=^L,
12011 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
12012 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
12013 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
12014 nel=^M^J, rev=\E0P\E), rmso=\E(,
12015 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
12016 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
12017 vp60|viewpoint60|addsvp60|adds viewpoint60,
12020 # adds viewpoint 90 - from cornell
12021 # Note: emacs sends ei occasionally to insure the terminal is out of
12022 # insert mode. This unfortunately puts the viewpoint90 IN insert
12023 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
12024 # - :ei=:im=: must be present in the termcap translation.)
12025 # - <xhp> indicates glitch that attributes stick to location
12026 # - <msgr> means it's safe to move in standout mode
12027 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12029 # Function key and label capabilities merged in from SCO.
12030 vp90|viewpoint90|adds viewpoint 90,
12031 OTbs, bw, msgr, xhp,
12033 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
12034 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
12035 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
12036 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
12037 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
12038 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12039 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
12040 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
12041 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
12042 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
12043 # Note: if return acts weird on a980, check internal switch #2
12044 # on the top chip on the CONTROL pc board.
12045 adds980|a980|adds consul 980,
12048 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
12049 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12050 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12051 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12052 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12054 #### C. Itoh Electronics
12056 # As of 1995 these people no longer make terminals (they're still in the
12057 # printer business). Their terminals were all clones of the DEC VT series.
12058 # They're located in Orange County, CA.
12061 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12062 # the delay times and do an auto tab set rather than the indirect
12063 # file used in vt100.
12064 cit80|cit-80|citoh 80,
12067 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12068 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12069 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12070 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12071 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12072 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12073 cit101|citc|C.itoh fast vt100,
12076 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12077 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12078 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12079 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12080 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12081 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12082 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12083 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12085 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12086 # The following termcap entry was created from the Callan cd100 entry. The
12087 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12088 # full selection of combinations of reverse video, underline, and blink.
12089 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12090 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12091 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12092 cit101e|C. Itoh CIT-101e,
12093 OTbs, OTpt, am, mir, msgr,
12094 cols#80, it#8, lines#24,
12095 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12096 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12097 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12098 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12099 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12100 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12101 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12102 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12103 smkx=\E=, smso=\E[7m, smul=\E[4m,
12104 # From: David S. Lawyer, June 1997:
12105 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12106 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12107 # late 1980's CIT Terminals went out of business.
12108 # There is no need to use the initialization string is=... (by invoking
12109 # tset or setterm etc.) provided that the terminal has been manually set
12110 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12111 # compatible it should be in ANSI mode (not VT52). A set-up that
12112 # works is to set all the manually setable stuff to factory defaults
12113 # by pressing ^D in set-up mode. Then increse the brighness with the
12114 # up-arrow key since the factory default will likely be dim on an old
12115 # terminal. Then change any options you want (provided that they are
12116 # compatible with the termcap). For my terminal I set: Screen
12117 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12118 # on. I also set up mine for parity (but you may not need it). Then
12119 # save the setup with ^S.
12120 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12121 cit101e-rv|Citoh CIT-101e (sets reverse video),
12122 am, eo, mir, msgr, xenl, xon,
12123 cols#80, it#8, lines#24,
12124 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12125 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12126 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12127 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12128 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12129 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12130 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12131 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12132 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12133 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12134 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12135 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12136 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12137 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12138 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12139 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12140 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12141 cit101e-n|CIT-101e w/o am,
12143 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12145 cit101e-132|CIT-101e with 132 cols,
12147 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12148 cit101e-n132|CIT-101e with 132 cols w/o am,
12151 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12153 # CIE Terminals CIT-500 from BRL
12154 # The following SET-UP modes are assumed for normal operation:
12155 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12156 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12157 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12158 # Other SET-UP modes may be set for operator convenience or communication
12160 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12161 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12162 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12163 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12164 cit500|CIE Terminals CIT-500,
12165 OTbs, OTpt, mir, msgr, xon,
12166 OTkn#10, cols#80, it#8, lines#64, vt#3,
12167 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12168 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12169 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12170 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12171 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12172 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12173 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12174 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12175 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12176 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12177 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12178 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12179 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12180 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12181 rmso=\E[m, rmul=\E[m,
12182 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12183 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12184 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12186 # C. Itoh printers begin here
12187 citoh|ci8510|8510|c.itoh 8510a,
12190 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12191 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12193 citoh-pica|citoh in pica,
12194 is1=\EN, use=citoh,
12195 citoh-elite|citoh in elite,
12198 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12200 citoh-comp|citoh in compressed,
12203 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12205 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12206 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12208 is1=\EP, use=citoh,
12209 citoh-6lpi|citoh in 6 lines per inch mode,
12210 is3=\EA, use=citoh,
12211 citoh-8lpi|citoh in 8 lines per inch mode,
12213 is3=\EB, use=citoh,
12215 #### Control Data (cdc)
12218 cdc456|cdc 456 terminal,
12221 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12222 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
12223 el=^V, home=^Y, il1=\EL, ind=^J,
12225 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
12229 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12230 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12231 kcuu1=^W, khome=^Y,
12232 cdc721ll|CDC Vikingll,
12234 cols#132, lines#24,
12235 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12236 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12237 kcuu1=^W, khome=^Y,
12238 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
12242 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12243 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
12244 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
12246 # The following switch/key settings are assumed for normal operation:
12247 # 96 chars SCROLL FULL duplex not BLOCK
12248 # Other switches may be set according to communication requirements.
12249 # Insert/delete-character cannot be used, as the whole display is affected.
12250 # "so" & "se" are commented out until jove handles "sg" correctly.
12253 OTkn#10, cols#80, lines#24,
12254 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12255 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
12256 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
12257 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
12258 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
12259 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
12260 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
12261 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
12262 rs1=\031\030\002\003\017,
12264 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
12266 # Part of the long initialization string defines the "DOWN" key to the left
12267 # of the tab key to send an ESC. The real ESC key is positioned way out
12270 # The termcap won't work in 132 column mode due to the way it it moves the
12271 # cursor. Termcap doesn't have the capability (as far as I could tell) to
12272 # handle the 721 in 132 column mode.
12274 # (cdc721: changed :ri: to :sr: -- esr)
12275 cdc721-esc|Control Data 721,
12276 OTbs, OTpt, am, bw, msgr, xon,
12277 OTkn#10, cols#80, it#8, lines#30,
12278 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
12279 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
12280 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
12281 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
12282 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
12283 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
12284 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
12285 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
12286 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
12287 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
12288 smso=^^D, smul=^\, tbc=^^^RY,
12292 # Getronics is a Dutch electronics company that at one time was called
12293 # `Geveke' and made async terminals; but (according to the company itself!)
12294 # they've lost all their documentation on the command set. The hardware
12295 # documentation suggests the terminals were actually manufactured by a
12296 # Taiwanese electronics company named Cal-Comp. There are known
12297 # to have been at least two models, the 33 and the 50.
12300 # The 50 seems to be a top end vt220 clone, with the addition of a higher
12301 # screen resolution, a larger screen, at least 1 page of memory above and
12302 # below the screen, apparently pages of memory right and left of the screen
12303 # which can be panned, and about 75 function keys (15 function keys x normal,
12304 # shift, control, func A, func B). It also has more setup possibilities than
12305 # the vt220. The monitor case is dated November 1978 and the keyboard case is
12308 # The vt100 emulation works as is. The entry below describes the rather
12309 # non-conformant (but more featureful) ANSI mode.
12311 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
12312 visa50|geveke visa 50 terminal in ansi 80 character mode,
12315 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
12316 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
12317 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12318 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12319 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12320 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
12321 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
12322 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12323 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
12324 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
12325 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
12326 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
12327 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
12328 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
12329 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
12330 lf3=A insert line, lf4=A delete line, lf5=A clear,
12331 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
12332 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
12333 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
12334 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
12335 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
12338 #### Human Designed Systems (Concept)
12340 # Human Designed Systems
12342 # King of Prussia, PA 19406
12343 # Vox: (610)-277-8300
12344 # Fax: (610)-275-5739
12345 # Net: support@hds.com
12347 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
12348 # the character-terminal business now (1995) and making X terminals. In
12349 # particular, the whole `Concept' line described here was discontinued long
12353 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
12354 # Extensive changes to c108 by arpavax:eric Feb 1982
12355 # Some unknown person at SCO then translated it to terminfo.
12357 # There seem to be a number of different versions of the C108 PROMS
12358 # (with bug fixes in its Z-80 program).
12360 # The first one that we had would lock out the keyboard of you
12361 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
12362 # Try that on your C108 and see if it sends a ^S when you type it.
12363 # If so, you have an old version of the PROMs.
12365 # You should configure the C108 to send ^S/^Q before running this.
12366 # It is much faster (at 9600 baud) than the c100 because the delays
12368 # new status line display entries for c108-8p:
12369 # <is3> - init str #3 - setup term for status display -
12370 # set programmer mode, select window 2, define window at last
12371 # line of memory, set bkgnd stat mesg there, select window 0.
12373 # <tsl> - to status line - select window 2, home cursor, erase to
12374 # end-of-window, 1/2 bright on, goto(line#0, col#?)
12376 # <fsl> - from status line - 1/2 bright off, select window 0
12378 # <dsl> - disable status display - set bkgnd status mesg with
12381 # There are probably more function keys that should be added but
12382 # I don't know what they are.
12384 # No delays needed on c108 because of ^S/^Q handshaking
12386 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
12387 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
12388 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
12389 c108-4p|concept108-4p|concept 108 w/4 pages,
12390 OTbs, eslok, hs, xon,
12392 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
12393 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
12394 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
12395 ind=^J, is1=\EK\E!\E F,
12396 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
12397 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
12398 smcup=\EU\Ev 8p\Ep\r\E\025,
12399 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
12400 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
12401 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
12403 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
12404 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
12406 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
12408 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
12409 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
12412 # These have only window relative cursor addressing, not screen
12413 # relative. To get it to work right here, smcup/rmcup (which
12414 # were invented for the concept) lock you into a one page
12415 # window for screen style programs.
12417 # To get out of the one page window, we use a clever trick:
12418 # we set the window size to zero ("\Ev " in rmcup) which the
12419 # terminal recognizes as an error and resets the window to all
12422 # This trick works on c100 but does not on c108, sigh.
12424 # Some tty drivers use cr3 for concept, others use nl3, hence
12425 # the delays on cr and ind below. This padding is only needed at
12426 # 9600 baud and up. One or the other is commented out depending on
12427 # local conventions.
12429 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
12430 # less than 6 but more than 2 will work.
12432 # Note: can't use function keys f7-f10 because they are
12433 # indistinguishable from arrow keys (!), also, del char and
12434 # clear eol use xon/xoff so they probably won't work very well.
12436 # Also note that we don't define insrt/del char/delline/eop/send
12437 # because they don't transmit unless we reset them - I figured
12438 # it was a bad idea to clobber their definitions.
12440 # The <mc5> sequence changes the escape character to ^^ so that
12441 # escapes will be passed through to the printer. Only trouble
12442 # is that ^^ won't be - ^^ was chosen to be unlikely.
12443 # Unfortunately, if you're sending raster bits through to be
12444 # plotted, any character you choose will be likely, so we lose.
12446 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
12447 # cannot be # in is2 because it will hang a c100 with no printer
12449 c100|concept100|concept|c104|c100-4p|hds concept 100,
12450 OTbs, am, eo, mir, ul, xenl,
12451 cols#80, lines#24, pb#9600, vt#8,
12452 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
12453 cub1=^H, cud1=^J, cuf1=\E=,
12454 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
12455 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
12456 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
12457 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
12459 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
12460 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
12461 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
12462 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
12463 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
12464 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
12465 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
12466 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
12467 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
12468 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
12469 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
12470 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
12471 smso=\ED, smul=\EG,
12472 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
12473 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
12474 smso=\EE, use=c100,
12475 oc100|oconcept|c100-1p|old 1 page concept 100,
12479 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
12480 # Lots of notes, originally inline, but ncurses doesn't grok that.
12482 # am: not available in power on mode, but turned on with \E[=107;207h in
12483 # is2=. Also, \E=124l in is2= could have been used to prevent needing
12484 # to specify xenl:, but that would have rendered the last space on the
12485 # last line useless.
12486 # bw: Not available in power on mode, but turned on with \E[=107;207h in
12488 # clear: Could be done with \E[2J alone, except that vi (and probably most
12489 # other programs) assume that this also homes the cursor.
12490 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12491 # scroll the window, and go back to window 1.
12492 # is2: the string may cause a warning to be issued by tic that it
12493 # found a very long line and that it suspects that a comma is missing
12494 # somewhere. This warning can be ignored (unless it comes up more than
12495 # once). The initialization string contains the following commands:
12497 # [Setup mode items changed from factory defaults:]
12498 # \E)0 set alternate character set to
12500 # ^O set character set to default
12501 # [In case it wasn't]
12502 # \E[m turn off all attributes
12503 # [In case they weren't off]
12504 # \E[=107; cursor wrap and
12505 # 207h character wrap on
12506 # \E[90;3u set Fkey definitions to "transmit"
12508 # \E[92;3u set cursor key definitions to
12509 # "transmit" defaults
12510 # \E[43;1u set shift F13 to transmit...
12512 # \E[44;1u set shift F14 to transmit...
12514 # \E[45;1u set shift F15 to transmit...
12516 # \E[46;1u set shift F16 to transmit...
12518 # \E[200;1u set shift up to transmit...
12520 # \E[201;1u set shift down to transmit...
12522 # \E[202;1u set shift right to transmit...
12524 # \E[203;1u set shift left to transmit...
12526 # \E[204;1u set shift home to transmit...
12528 # \E[212;1u set backtab to transmit...
12530 # \E[213;1u set shift backspace to transmit...
12532 # \E[214;1u set shift del to transmit...
12534 # [Necessary items not mentioned in setup mode:]
12535 # \E[2!w move to window 2
12536 # \E[25;25w define window as line 25 of memory
12537 # \E[!w move to window 1
12538 # \E[2*w show current line of window 2 as
12540 # \E[2+x set meta key to use high bit
12541 # \E[;3+} move underline to bottom of character
12543 # All Fkeys are set to their default transmit definitions with \E[90;3u
12544 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12545 # setting MUST be redefined or deactivated, because the default is
12546 # contained in almost all of this terminal's Fkey strings! If for some
12547 # reason "quit" cannot be altered, the Fkeys can, but it would be
12548 # necessary to change ^| to ^] in all of these definitions, and add
12549 # \E[2;029!t to is2.
12550 # lines: is set to 24 because this terminal refuses to treat the 25th
12552 # ll: Not available in power on mode, but turned on with \E[=107;207h in
12554 # lm: Pointless, given that this definition locks a single screen of
12555 # memory into view, but what the hey...
12556 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12557 # other attributes alone), but some programs expect this to turn off
12559 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12560 # attributes alone), but some programs expect this to turn off
12562 # sgr: Attributes are set on this terminal with the string \E[ followed by
12563 # a list of attribute code numbers (in decimal, separated by
12564 # semicolons), followed by the character m. The attribute code
12567 # 2 for dim (which is ignored in power on mode);
12571 # 8 for not displayable; and
12572 # =99 for protected (except that there are strange side
12573 # effects to protected characters which make them inadvisable).
12574 # The mapping of terminfo parameters to attributes is as follows:
12575 # %p1 (standout) = bold and inverse together;
12576 # %p2 (underline) = underline;
12577 # %p3 (reverse) = inverse;
12578 # %p4 (blink) = blinking;
12579 # %p5 (dim) is ignored;
12580 # %p6 (bold) = bold;
12581 # %p7 (invisible) = not displayable;
12582 # %p8 (protected) is ignored; and
12583 # %p9 (alt char set) = alt char set.
12584 # The code to do this is:
12586 # %?%p1%p6%O IF (standout; bold) OR
12587 # %t;1 THEN OUTPUT ;1
12589 # %?%p2 IF underline
12590 # %t;4 THEN OUTPUT ;4
12593 # %t;5 THEN OUTPUT ;5
12595 # %?%p1%p3%O IF (standout; reverse) OR
12596 # %t;7 THEN OUTPUT ;7
12598 # %?%p7 IF invisible
12599 # %t;8 THEN OUTPUT ;8
12602 # %?%p9 IF altcharset
12603 # %t^N THEN OUTPUT ^N
12604 # %e^O ELSE OUTPUT ^O
12606 # sgr0: Everything is turned off (including alternate character set), since
12607 # there is no way of knowing what it is that the program wants turned
12609 # smul: The "underline" attribute is reconfigurable to an overline or
12610 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
12611 # bottom of the character cell. This was done to allow for more readable
12612 # underlined characters, and to be able to distinguish between an
12613 # underlined space, an underscore, and an underlined underscore.
12614 # xenl: Terminal can be configured to not need this, but this "glitch"
12615 # behavior is actually preferable with autowrap terminals.
12617 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
12618 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
12619 # string modifies the 'O' in kf43 to kf46 to a '$'.
12621 # kcbt was originally ^I but redefined in is2=.
12622 # kHOM was \E[H originally but redefined in is2=, as were a number of
12624 # kDC was originally \177 but redefined in is2=.
12626 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
12627 # tsl: Go to window 2, then do an hpa=.
12629 #------- flash=\E[8;3!}^G\E[3;3!}
12630 #------- flash=\E[?5h$<100>\E[?5l
12631 # There are two ways to flash the screen, both of which have their drawbacks.
12632 # The first is to set the bell mode to video, transmit a bell character, and
12633 # set the bell mode back - but to what? There is no way of knowing what the
12634 # user's old bell setting was before we messed with it. Worse, the command to
12635 # set the bell mode also sets the key click volume, and there is no way to say
12636 # "leave that alone", or to know what it's set to, either.
12637 # The second way to do a flash is to set the screen to inverse video, pad for a
12638 # tenth of a second, and set it back - but like before, there's no way to know
12639 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12640 # it that way. The point is moot anyway, since vi (and probably other
12641 # programs) assume that by defining flash=, you want the computer to use it
12642 # INSTEAD of bel=, rather than as a secondary type of signal.
12644 #------- cvvis=\E[+{
12645 # The is the power on setting, which is also as visible as the cursor
12647 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12648 # Windowing is possible, but not defined here because it is also used to
12649 # emulate status line functions. Allowing a program to set a window could
12650 # clobber the status line or render it unusable. There is additional memory,
12651 # but screen scroll functions are destructive and do not make use of it.
12653 #------- dim= Not available in power on mode.
12654 # You have a choice of defining low intensity characters as "half bright" and
12655 # high intensity as "normal", or defining low as "normal" and high as "bold".
12656 # No matter which you choose, only one of either "half bright" or "bold" is
12657 # available at any time, so taking the time to override the default is
12660 #------- prot=\E[=0;99m
12661 # Not defined, because it appears to have some strange side effects.
12662 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12663 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12664 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12665 # Available, but making them available to programs is inadvisable.
12666 # The code to do this is:
12667 # %?%p1%{24}%< IF ((key; 24) <;
12668 # %p1%{30}%> ((key; 30) >;
12669 # %p1%{54}%< (key; 54) <
12672 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12673 # %t\E[ THEN OUTPUT \E[
12674 # %p1%d OUTPUT (key) as decimal
12675 # [next line applies to pfx only]
12679 # %p2%s OUTPUT (string) as string
12681 # [DEL chosen as delimiter, but could be any character]
12682 # [implied: ELSE do nothing]
12686 # Not defined since anything it might do could be done faster and easier with
12687 # either Meta-Shift-Reset or the main power switch.
12689 #------- smkx=\E[1!z
12690 #------- rmkx=\E[!z
12691 # These sequences apply to the cursor and setup keys only, not to the
12692 # numeric keypad. But it doesn't matter anyway, since making these
12693 # available to programs is inadvisable.
12694 # For the key definitions below, all sequences beginning with \E$ are
12695 # custom and programmed into the terminal via is2. \E$ also has no
12696 # meaning to any other terminal.
12698 #------- cmdch=\E[;%p1%d!t
12699 # Available, but making it available to programs is inadvisable.
12700 #------- smxon=\E[1*q
12701 # Available, but making it available to programs is inadvisable.
12702 # Terminal will send XON/XOFF on buffer overflow.
12703 #------- rmxon=\E[*q
12704 # Available, but making it available to programs is inadvisable.
12705 # Terminal will not notify on buffer overflow.
12706 #------- smm=\E[2+x
12708 # Available, but making them available to programs is inadvisable.
12711 # It's not made clear in the manuals, but based on other ansi/vt type
12712 # terminals, it's a good guess that this terminal is capable of both
12713 # "transparent print" (which doesn't copy data to the screen, and
12714 # therefore needs mc5i: specified to say so) and "auxilliary print"
12715 # (which does duplicate printed data on the screen, in which case mc4=
12716 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12718 hds200|Human Designed Systems HDS200,
12719 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
12720 cols#80, it#8, lines#24, lm#0,
12721 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12722 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12723 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12724 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12725 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12726 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12727 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12728 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12729 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12730 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12732 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12733 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12734 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12735 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12736 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12737 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12738 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12739 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12740 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12741 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12742 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12743 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12744 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12745 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12746 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12747 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12748 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
12749 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
12750 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12751 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12752 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12753 vpa=\E[%i%p1%dd, use=ansi+pp,
12755 # <ht> through <el> included to specify padding needed in raw mode.
12756 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12757 avt-ns|concept avt no status line,
12758 OTbs, am, eo, mir, ul, xenl, xon,
12759 cols#80, it#8, lines#24, lm#192,
12760 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12761 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12762 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12763 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12764 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12765 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12766 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12767 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12768 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12769 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12770 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12771 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12772 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12773 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12774 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12775 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12776 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12777 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12778 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12780 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
12781 sgr0=\E[m\016$<1>, smacs=\017$<1>,
12782 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
12783 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12784 vpa=\E[%p1%{1}%+%dd,
12785 avt-rv-ns|concept avt in reverse video mode/no status line,
12786 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12788 avt-w-ns|concept avt in 132 column mode/no status line,
12789 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12791 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12792 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12793 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12795 # Concept AVT with status line. We get the status line using the
12796 # "Background status line" feature of the terminal. We swipe the
12797 # first line of memory in window 2 for the status line, keeping
12798 # 191 lines of memory and 24 screen lines for regular use.
12799 # The first line is used instead of the last so that this works
12800 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12801 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12803 avt+s|concept avt status line changes,
12806 dsl=\E[0*w, fsl=\E[1;1!w,
12807 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12808 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12809 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12810 avt|avt-s|concept-avt|avt w/80 columns,
12811 use=avt+s, use=avt-ns,
12812 avt-rv|avt-rv-s|avt reverse video w/sl,
12813 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12814 use=avt+s, use=avt-ns,
12815 avt-w|avt-w-s|concept avt 132 cols+status,
12816 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12817 use=avt+s, use=avt-ns,
12818 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12819 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12820 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12822 #### Contel Business Systems.
12825 # Contel c300 and c320 terminals.
12826 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12828 cols#80, lines#24, xmc#1,
12829 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12830 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12831 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12832 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12833 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12834 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12835 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12836 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12837 # Contel c301 and c321 terminals.
12838 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12839 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12842 #### Data General (dg)
12844 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12845 # the terminals group at Data General was shut down in 1991; all these
12846 # terminals have thus been discontinued.
12848 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12849 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12850 # sequentially, first the unmodified key codes are listed as F1 through F15.
12851 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12852 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12853 # F46 through F60. This is done in the private "includes" below whose names
12854 # start with "dgkeys+".
12856 # DG terminals generally support 8 bit characters. For each of these terminals
12857 # two descriptions are supplied:
12858 # 1) A default description for 8 bits/character communications, which
12859 # uses the default DG international character set and keyboard codes.
12860 # 2) A description with suffix "-7b" for 7 bits/character communications.
12861 # This description must use the NON-DEFAULT native keyboard language.
12863 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12864 # Ctrl/Shift fdkeys (kf34-kf44).
12866 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12867 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12868 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12869 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12870 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12871 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12872 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12873 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12874 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12875 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12876 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12877 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12878 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12879 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12880 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12881 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12882 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12883 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12884 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12885 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12886 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12887 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12888 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12889 khome=\233H, kprt=\233i,
12891 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12892 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12893 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12894 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12895 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12896 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12897 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12898 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12899 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12900 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12901 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12902 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12903 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12904 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12905 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12906 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12907 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12908 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12909 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12911 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12912 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12913 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12914 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12915 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12916 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12917 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12918 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12919 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12920 kf8=^^x, kf9=^^y, khome=^H,
12922 dgkeys+15|Private entry describing 15 DG mode special keys,
12923 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12924 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12925 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12926 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12927 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12928 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12929 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12930 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12931 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12932 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12933 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12936 # Data General color terminals use the "Tektronix" color model. The total
12937 # number of colors varies with the terminal model, as does support for
12938 # attributes used in conjunction with color.
12940 # Removed u7, u8 definitions since they conflict with tack:
12941 # Preserve user-defined colors in at least some cases.
12943 # Default is ACM mode.
12944 # u8=^^F}20^^Fi^^F}21,
12946 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12948 colors#16, ncv#53, pairs#256,
12950 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12951 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12952 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12954 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12957 # Video attributes are coordinated using static variables set by "sgr", then
12958 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12959 # (D=dim, U=underline, B=blink, R=reverse.)
12960 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12962 colors#8, ncv#16, pairs#64,
12963 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12964 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12965 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12966 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12967 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12969 dg+color|Color info for Data General D470C terminals in ANSI mode,
12970 colors#16, ncv#53, pairs#256,
12971 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12972 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12973 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12974 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12977 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12979 colors#8, ncv#16, pairs#64,
12981 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12982 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12983 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12985 dgmode+color|Color info for Data General D470C terminals in DG mode,
12986 colors#16, pairs#256,
12987 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12988 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12991 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12993 colors#52, ncv#53, pairs#26,
12994 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
12995 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12996 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12997 scp=\036RG2%p1%02X,
12999 # Colors are in the order: normal, reverse, dim, dim + reverse.
13000 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
13002 colors#52, ncv#53, pairs#26,
13003 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
13004 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
13005 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
13006 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
13008 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
13009 # Initialization string 1 sets:
13010 # ^R - vertical scrolling enabled
13011 # ^C - blinking enabled
13012 dg-generic|Generic Data General terminal in DG mode,
13015 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13016 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
13017 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
13018 smul=^T, use=dgkeys+11,
13020 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
13021 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
13022 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
13023 # maybe they were originally nuls (which would fit).
13025 dg200|data general dasher 200,
13028 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13029 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
13030 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
13031 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
13032 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
13035 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
13036 dg210|dg-ansi|Data General 210/211,
13039 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
13040 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13041 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13042 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
13043 smso=\E[7;m, smul=\E[4;m,
13044 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
13045 # courtesy of Carlos Rucalde of Vantage Software, Inc.
13046 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
13047 # I suspect the d200 function keys actually work on the dg211, check it out.)
13048 dg211|Data General d211,
13049 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13050 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13051 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13053 # dg450 from Cornell (not official)
13054 dg450|dg6134|data general 6134,
13055 cub1@, cuf1=^X, use=dg200,
13058 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13059 # having a command to move straight down from any position on the bottom line
13060 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13061 # above have both, the D210/211, for instance, has neither. We must use ANSI
13062 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13063 # backspace on all terminals. This is not so in DG mode.
13064 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13065 # grounds that there is no matching ":ml:"
13066 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13067 OTbs, am, msgr, ul,
13068 cols#80, it#8, lines#24,
13069 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13070 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13071 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13072 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13073 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13074 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13075 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13076 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13077 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13078 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13079 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13080 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13081 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13082 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13083 # Data General 605x
13084 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13085 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13086 # This also matches a posted description of something called a `Dasher 100'
13087 # so there's a dg100 alias here.
13088 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13089 dg6053-old|dg100|data general 6053,
13092 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13093 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13094 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13095 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13096 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13097 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13100 # (Some performance can be gained over the generic DG terminal type)
13101 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13103 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13105 # Like 6053, but adds reverse video and more keypad and function keys.
13106 d200|d200-dg|Data General DASHER D200,
13107 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13108 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13109 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13112 # DASHER D210 series terminals in ANSI mode.
13113 # Reverse video, no insert/delete character/line, 7 bits/character only.
13115 # Initialization string 1 sets:
13116 # <0 - scrolling enabled
13117 # <1 - blink enabled
13118 # <4 - print characters regardless of attributes
13119 d210|d214|Data General DASHER D210 series,
13122 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13123 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13124 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13125 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13126 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13127 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13128 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
13129 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13131 # DASHER D210 series terminals in DG mode.
13132 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13133 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13135 ed=^^FF, use=d200-dg,
13137 # DASHER D211 series terminals in ANSI mode.
13138 # Like the D210, but with 8-bit characters and local printer support.
13140 # Initialization string 2 sets:
13142 # 2;1 - 8 bit operations
13143 # 1;1 - 8 bit (international) keyboard language
13144 # \E(B - default primary character set (U.S. ASCII)
13145 # \E)4 - default secondary character set (international)
13146 # ^O - primary character set
13148 d211|d215|Data General DASHER D211 series,
13150 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13153 # Initialization string 2 sets:
13155 # 2;0 - 7 bit operations
13156 # 1;0 - 7 bit (native) keyboard language
13157 # \E(0 - default character set (the keyboard native language)
13158 # ^O - primary character set
13159 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13161 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13163 # Like the D210 series, but adds support for 8-bit characters.
13165 # Reset string 2 sets:
13166 # ^^N - secondary character set
13167 # ^^FS0> - 8 bit international character set
13168 # ^^O - primary character set
13169 # ^^FS00 - default character set (matching the native keyboard language)
13171 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13173 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13175 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13178 # Enhanced DG mode with changes to be more UNIX compatible.
13179 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13182 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13183 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13184 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13185 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13186 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13187 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13188 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13189 rs2=\036N\036FS0E\036O\036FS00,
13190 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13191 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13192 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13193 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13195 is3=\036Fz2, use=d216+,
13197 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13199 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13202 # DASHER D220 color terminal in ANSI mode.
13203 # Like the D470C but with fewer colors and screen editing features.
13205 # Initialization string 1 sets:
13207 # <0 - scrolling enabled
13208 # <1 - blink enabled
13209 # <4 - print characters regardless of attributes
13210 # \E[m - all attributes off
13211 # Reset string 1 sets:
13212 # \Ec - initial mode defaults (RIS)
13214 d220|Data General DASHER D220,
13216 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13217 use=dg+color8, use=d470c,
13219 d220-7b|Data General DASHER D220 in 7 bit mode,
13221 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13222 use=dg+color8, use=d470c-7b,
13224 # Initialization string 3 sets:
13225 # - default cursor (solid rectangle)
13226 # Reset string 2 sets:
13227 # ^^N - secondary character set
13228 # ^^FS0> - 8 bit international character set
13229 # ^^O - primary character set
13230 # ^^FS00 - default character set (matching the native keyboard language)
13232 d220-dg|Data General DASHER D220 color terminal in DG mode,
13234 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
13235 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
13238 # DASHER D230C color terminal in ANSI mode.
13239 # Like the D220 but with minor ANSI compatibility improvements.
13241 d230c|d230|Data General DASHER D230C,
13242 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
13243 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
13244 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13245 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
13246 smul=\E[4;50m, use=dgkeys+7b, use=d220,
13248 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
13251 # DASHER D400/D450 series terminals.
13252 # These add intelligent features like insert/delete to the D200 series.
13254 # Initialization string 2 sets:
13255 # ^^FQ2 - default cursor (solid rectangle)
13256 # ^^FW - character protection disabled
13257 # ^^FJ - normal (80 column) mode
13258 # ^^F\^ - horizontal scrolling enabled (for alignment)
13259 # ^^FX004? - margins at columns 0 and 79
13260 # ^^F] - horizontal scrolling disabled
13261 # ^^O - primary character set
13262 # ^^FS00 - default character set (the keyboard native language)
13263 # - (should reset scrolling regions, but that glitches the screen)
13264 # Reset string 1 sets:
13265 # ^^FA - all terminal defaults except scroll rate
13266 # Reset string 2 sets:
13267 # ^^F] - horizontal scrolling disabled
13268 # ^^FT0 - jump scrolling
13270 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
13272 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
13273 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
13274 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
13275 ich1=^^J, il1=^^FH,
13276 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
13277 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
13278 rs1=^^FA, rs2=\036F]\036FT0,
13279 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
13280 sgr0=\017\025\035\036E\036O, smacs=^^N,
13281 vpa=\020\177%p1%c, use=d210-dg,
13283 # DASHER D410/D460 series terminals in ANSI mode.
13284 # These add a large number of intelligent terminal features.
13286 # Initialization string 1 sets:
13288 # <0 - scrolling enabled
13289 # <1 - blink enabled
13290 # <2 - horizontal scrolling enabled (for alignment)
13291 # <4 - print characters regardless of attributes
13292 # \E[5;0v - normal (80 column) mode
13293 # \E[1;1;80w - margins at columns 1 and 80
13295 # 1 - print all characters even if protected
13296 # 6 - character protection disabled
13297 # <2 - horizontal scrolling disabled
13298 # - (should reset scrolling regions, but that glitches the screen)
13300 # Initialization string 2 sets:
13302 # 3;2 - default cursor (solid rectangle)
13303 # 2;1 - 8 bit operations
13304 # 1;1 - international keyboard language
13305 # \E(B - default primary character set (U.S. ASCII)
13306 # \E)4 - default secondary character set (international)
13307 # ^O - primary character set
13309 # Reset string 1 sets:
13310 # \Ec - initial mode defaults (RIS)
13311 # \E[<2h - horizontal scrolling disabled
13313 # Reset string 2 sets:
13315 # 4;0 - jump scrolling
13316 # 2;1 - 8 bit operations
13317 # 1;1 - 8 bit (international) keyboard language
13318 # \E(B - default primary character set (U.S. ASCII)
13319 # \E)4 - default secondary character set (international)
13321 d410|d411|d460|d461|Data General DASHER D410/D460 series,
13323 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
13324 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13325 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
13326 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
13327 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
13328 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
13329 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
13330 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
13331 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
13333 # Initialization string 2 sets:
13335 # 3;2 - default cursor (solid rectangle)
13336 # 2;0 - 7 bit operations
13337 # 1;0 - 7 bit (native) keyboard language
13338 # \E(0 - default character set (the keyboard native language)
13339 # ^O - primary character set
13341 # Reset string 2 sets:
13343 # 4;0 - jump scrolling
13344 # 2;0 - 7 bit operations
13345 # 1;0 - 7 bit (native) keyboard language
13346 # \E(0 - default character set (the keyboard native language)
13348 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
13350 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
13351 rs2=\E[4;0;2;0;1;0v\E(0,
13352 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
13353 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
13355 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
13357 enacs@, rmacs=\036FS00,
13358 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13359 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
13362 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
13364 # Initialization string 1 sets:
13366 # <0 - scrolling enabled
13367 # <1 - blink enabled
13368 # <2 - horizontal scrolling enabled (for alignment)
13369 # <4 - print characters regardless of attributes
13370 # \E[5;1v - compressed (135 column) mode
13371 # \E[1;1;126 - margins at columns 1 and 126
13373 # 1 - print all characters even if protected
13374 # 6 - character protection disabled
13375 # <2 - horizontal scrolling disabled
13376 # - (should reset scrolling regions, but that glitches the screen)
13378 # Reset string 1 sets:
13379 # \Ec - initial mode defaults (RIS)
13380 # \E[5;1v - compressed (135 column) mode
13381 # \E[1;1;126w - margins at columns 1 and 126
13382 # \E[<2h - horizontal scrolling disabled
13384 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
13386 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13387 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
13389 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
13391 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13392 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
13394 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
13397 # These add intelligent features like scrolling regions.
13398 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
13399 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
13400 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
13401 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
13402 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
13403 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
13404 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
13405 vpa=\036FPFF%p1%2.2X,
13406 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13408 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
13410 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
13411 rs2=\036P@1\036FK\036FX0083,
13412 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
13414 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
13417 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13419 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
13421 clear=\036FG\036PH, fsl=\036F}01\022,
13422 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
13423 tsl=\036F}00\036FP%p1%2.2X18\036PG,
13424 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
13427 # Relative cursor motions are confined to the current window,
13428 # which is not what the scrolling region specification expects.
13429 # Thus, relative vertical cursor positioning must be deleted.
13430 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
13431 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
13432 cud1@, cuu1@, ll@, use=d462+,
13434 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
13436 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
13438 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
13440 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
13442 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
13445 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
13447 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
13449 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
13451 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
13453 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
13456 d430c-dg|d430-dg|Data General D430C in DG mode,
13457 use=d413-dg, use=dg+fixed,
13458 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
13459 use=d413-dg, use=dg+ccc,
13461 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
13462 use=d413-unix, use=dgunix+fixed,
13463 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
13464 use=d413-unix-w, use=dgunix+fixed,
13465 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
13466 use=d413-unix-25, use=dgunix+fixed,
13467 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
13468 use=d413-unix-s, use=dgunix+fixed,
13469 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
13470 use=d413-unix-sr, use=dgunix+fixed,
13471 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
13472 use=d413-unix, use=dgunix+ccc,
13473 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
13474 use=d413-unix-w, use=dgunix+ccc,
13475 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
13476 use=d413-unix-25, use=dgunix+ccc,
13477 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
13478 use=d413-unix-s, use=dgunix+ccc,
13479 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
13480 use=d413-unix-sr, use=dgunix+ccc,
13482 # DASHER D470C color terminal in ANSI mode.
13483 # Like the D460 but with 16 colors and without a compressed mode.
13485 # Initialization string 1 sets:
13487 # <0 - scrolling enabled
13488 # <1 - blink enabled
13489 # <2 - horizontal scrolling enabled (for alignment)
13490 # <4 - print characters regardless of attributes
13491 # \E[1;1;80w - margins at columns 1 and 80
13493 # 1 - print all characters even if protected
13494 # 6 - character protection disabled
13495 # <2 - horizontal scrolling disabled
13496 # - (should reset scrolling regions, but that glitches the screen)
13498 d470c|d470|Data General DASHER D470C,
13499 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13500 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
13501 use=dg+color, use=d460,
13503 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
13504 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13505 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
13506 use=dg+color, use=d460-7b,
13508 # Initialization string 2 sets:
13509 # ^^FQ2 - default cursor (solid rectangle)
13510 # ^^FW - character protection disabled
13511 # ^^F\^ - horizontal scrolling enabled (for alignment)
13512 # ^^FX004? - margins at columns 0 and 79
13513 # ^^F] - horizontal scrolling disabled
13514 # ^^O - primary character set
13515 # ^^FS00 - default character set (the keyboard native language)
13516 # - (should reset scrolling regions, but that glitches the screen)
13518 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
13519 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
13520 use=dgmode+color, use=d460-dg,
13522 # DASHER D555 terminal in ANSI mode.
13523 # Like a D411, but has an integrated phone.
13524 d555|Data General DASHER D555,
13526 d555-7b|Data General DASHER D555 in 7-bit mode,
13528 d555-w|Data General DASHER D555 in wide mode,
13530 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
13532 d555-dg|Data General DASHER D555 series in DG mode,
13535 # DASHER D577 terminal in ANSI mode.
13536 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
13537 d577|Data General DASHER D577,
13539 d577-7b|Data General DASHER D577 in 7-bit mode,
13541 d577-w|Data General DASHER D577 in wide mode,
13543 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
13546 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
13549 # DASHER D578 terminal.
13550 # Like a D577, but without compressed mode; like a D470C in this respect.
13552 # Initialization string 1 sets:
13554 # <0 - scrolling enabled
13555 # <1 - blink enabled
13556 # <2 - horizontal scrolling enabled (for alignment)
13557 # <4 - print characters regardless of attributes
13558 # \E[1;1;80w - margins at columns 1 and 80
13560 # 1 - print all characters even if protected
13561 # 6 - character protection disabled
13562 # <2 - horizontal scrolling disabled
13563 # - (should reset scrolling regions, but that glitches the screen)
13565 d578|Data General DASHER D578,
13566 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13567 d578-7b|Data General DASHER D578 in 7-bit mode,
13568 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13570 #### Datamedia (dm)
13572 # Datamedia was headquartered in Nashua, New Hampshire until it went
13573 # out of business in 1993, but the ID plates on the terminals referred
13574 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
13575 # manufacturer which threw out all information about the terminals.
13578 cs10|colorscan|Datamedia Color Scan 10,
13581 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13582 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13583 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13584 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
13585 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13586 cs10-w|Datamedia Color Scan 10 with 132 columns,
13588 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13590 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
13591 dm1520|dm1521|datamedia 1520,
13593 cols#80, it#8, lines#24,
13594 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13595 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13596 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
13598 # dm2500: this terminal has both <ich> and <smir>. Applications using
13599 # termcap/terminfo directly (rather than through ncurses) might be confused.
13600 dm2500|datamedia2500|datamedia 2500,
13603 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
13604 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
13605 dch1=\020\010\030\035$<10*>,
13606 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
13607 ich1=\020\034\030\035$<10*>,
13608 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
13609 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
13610 smdc=^P, smir=^P, smso=^N,
13611 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
13612 # also, has a meta-key.
13613 # From: <goldberger@su-csli.arpa>
13614 # (dmchat: ":MT:" changed to ":km:" -- esr)
13615 dmchat|dmchat version of datamedia 2500,
13617 dl1=\020\032\030\035$<2/>,
13618 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13619 # (dm3025: ":MT:" changed to ":km:" -- esr)
13620 dm3025|datamedia 3025a,
13622 cols#80, it#8, lines#24,
13623 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13624 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
13625 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
13626 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
13627 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
13628 smir=\EP, smso=\EO1,
13629 dm3045|datamedia 3045a,
13630 OTbs, am, eo, km@, ul, xenl,
13631 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
13632 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
13633 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
13634 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13636 # Datamedia DT80 soft switches:
13637 # 1 0=Jump 1=Smooth
13638 # Autorepeat 0=off 1=on
13639 # Screen 0=Dark 1=light
13640 # Cursor 0=u/l 1=block
13642 # 2 Margin Bell 0=off 1=on
13643 # Keyclick 0=off 1=on
13644 # Ansi/VT52 0=VT52 1=Ansi
13645 # Xon/Xoff 0=Off 1=On
13647 # 3 Shift3 0=Hash 1=UK Pound
13649 # Newline 0=Off 1=On
13650 # Interlace 0=Off 1=On
13652 # 4 Parity 0=Odd 1=Even
13653 # Parity 0=Off 1=On
13654 # Bits/Char 0=7 1=8
13655 # Power 0=60Hz 1=50Hz
13657 # 5 Line Interface 0=EIA 1=Loop
13658 # Aux Interface 0=EIA 1=Loop
13659 # Local Copy 0=Off 1=On
13662 # 6 Aux Parity 0=Odd 1=Even
13663 # Aux Parity 0=Off 1=On
13664 # Aux Bits/Char 0=7 1=8
13665 # CRT Saver 0=Off 1=On
13666 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13667 dm80|dmdt80|dt80|datamedia dt80/1,
13668 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13669 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13670 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13671 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13673 # except in 132 column mode, where it needs a little padding.
13674 # This is still less padding than the vt100, and you can always turn on
13675 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13677 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13679 clear=\E[H\E[2J$<50/>, cud1=^J,
13680 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13681 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13682 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13683 dt80-sas|Datamedia DT803/DTX for SAS usage,
13686 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13687 bel=^G, clear=^L, cr=^M,
13688 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13689 cub1=^H, cud1=\EB, cuf1=^\,
13690 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13691 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13692 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13693 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13694 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13695 smso=\E$2\004, tbc=\E'0,
13697 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13698 # These aren't end-all Excel termcaps; but do insert/delete char/line
13699 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13700 # The naming convention has been bent somewhat, with the use of E? (where
13701 # E is for 'Excel') as # a name. This was done to distinguish the entries
13702 # from the other Datamedias in use here, and yet to associate a model of
13703 # the Excel terminals with the regular datamedia terminals that share
13704 # major characteristics.
13705 excel62|excel64|datamedia Excel 62,
13706 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13707 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13709 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13710 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13711 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13713 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13714 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13715 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13716 smir=\E[4h, use=dt80,
13720 # Falco Data Products
13721 # 440 Potrero Avenue
13722 # Sunnyvale, CA 940864-196
13723 # Vox: (800)-325-2648
13724 # Fax: (408)-745-7860
13725 # Net: techsup@charm.sys.falco.com
13727 # Current Falco models as of 1995 are generally ANSI-compatible and support
13728 # emulations of DEC VT-series, Wyse, and Televideo types.
13731 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13732 # This terminal was released around 1983 and was discontinued long ago.
13733 # The standout and underline highlights are the same.
13734 falco|ts1|ts-1|falco ts-1,
13736 cols#80, it#8, lines#24,
13737 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13738 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13739 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13740 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13741 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13742 smir=\Eq, smso=\Eg1, smul=\Eg1,
13743 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13744 OTbs, am, da, db, mir, msgr, ul,
13745 cols#80, it#8, lines#24,
13746 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13747 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13748 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13749 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13750 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13751 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13752 smso=\Eg4, smul=\Eg1,
13753 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13754 ts100|ts100-sp|falco ts100-sp,
13755 am, mir, msgr, xenl, xon,
13756 cols#80, it#8, lines#24, vt#3,
13757 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13758 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13759 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13760 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13761 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13762 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13763 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13764 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13765 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13766 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13767 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13768 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13769 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13770 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13771 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13772 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13774 ts100-ctxt|falco ts-100 saving context,
13775 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13777 #### Florida Computer Graphics
13780 # Florida Computer Graphics Beacon System, using terminal emulator program
13781 # "host.com", as provided by FCG. This description is for an early release
13782 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13785 # From: David Bryant <cbosg!djb> 1/7/83
13786 beacon|FCG Beacon System,
13789 bel=\ESTART\r\E37\r\EEND\r$<1>,
13790 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13791 cub1=^H, cud1=^J, cuf1=\EV,
13792 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13793 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13794 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13795 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13796 rmul=\ESTART\r\E60\,0\r\EEND\r,
13797 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13798 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13799 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13800 smul=\ESTART\r\E60\,1\r\EEND\r,
13805 # The f1720a differences from ANSI: no auto margin, destructive
13806 # tabs, # of lines, funny highlighting and underlining
13807 f1720|f1720a|fluke 1720A,
13809 cols#80, lines#16, xmc#1,
13810 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13811 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13812 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13813 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13814 smso=\E[7m, smul=\E[4m,
13816 #### Liberty Electronics (Freedom)
13818 # Liberty Electronics
13819 # 48089 Fremont Blvd
13821 # Vox: (510)-623-6000
13822 # Fax: (510)-623-7021
13824 # From: <faletti@berkeley.edu>
13825 # (f100: added empty <acsc> to suppress a tic warning;
13826 # made this relative to adm+sgr -- note that <invis> isn't
13827 # known to work for f100 but does on the f110. --esr)
13828 f100|freedom|freedom100|freedom model 100,
13829 OTbs, am, bw, hs, mir, msgr, xon,
13831 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13832 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13833 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13834 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13835 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13836 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13837 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13838 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13839 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13840 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13841 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13842 f100-rv|freedom-rv|freedom 100 in reverse video,
13843 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13844 # The f110 and f200 have problems with vi(1). They use the ^V
13845 # code for the down cursor key. When kcud1 is defined in terminfo
13846 # as ^V, the Control Character Quoting capability (^V in insert mode)
13847 # is lost! It cannot be remapped in vi because it is necessary to enter
13848 # a ^V to to quote the ^V that is being remapped!!!
13850 # f110/f200 users will have to decide whether
13851 # to lose the down cursor key or the quoting capability. We will opt
13852 # initially for leaving the quoting capability out, since use of VI
13853 # is not generally applicable to most interactive applications
13854 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13855 f110|freedom110|Liberty Freedom 110,
13858 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13859 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13860 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13861 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13862 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13863 smso=\EG<, tsl=\Ef, use=f100,
13864 f110-14|Liberty Freedom 110 14inch,
13866 f110-w|Liberty Freedom 110 - 132 cols,
13867 cols#132, use=f110,
13868 f110-14w|Liberty Freedom 110 14in/132 cols,
13871 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13872 f200|freedom200|Liberty Freedom 200,
13873 OTbs, am, eslok, hs, mir, msgr, xon,
13874 cols#80, it#8, lines#24, wsl#80,
13875 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13876 clear=^Z, cnorm=\E.1, cr=^M,
13877 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13878 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13879 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13880 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13881 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13882 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13883 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13884 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13885 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13886 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13887 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13888 f200-w|Liberty Freedom 200 - 132 cols,
13889 cols#132, use=f200,
13890 # The f200 has the ability to reprogram the down cursor key. The key is
13891 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13892 # so powering the terminal off and on will not cause the change to be lost.
13893 f200vi|Liberty Freedom 200 for vi,
13894 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13895 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13896 cols#132, use=f200vi,
13900 # Graphon Corporation
13901 # 544 Division Street
13902 # Campbell, CA 95008
13903 # Vox: (408)-370-4080
13904 # Fax: (408)-370-5047
13905 # Net: troy@graphon.com (Troy Morrison)
13908 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13909 # including one odd hybrid that starts out life on power-up as a character
13910 # terminal, than can be switched to X graphics mode (driven over the serial
13911 # line) by an escape sequence. No info on this beast yet.
13912 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13913 go140|graphon go-140,
13915 cols#80, it#8, lines#24,
13916 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
13917 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13918 ed=\E[J$<10/>, el=\E[K, ht=^I,
13919 if=/usr/share/tabset/vt100, il1=\E[L,
13920 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13921 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13922 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13923 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13924 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13925 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13926 go140w|graphon go-140 in 132 column mode,
13929 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13931 # Hacked up vt200 termcap to handle GO-225/VT220
13932 # From: <edm@nwnexus.WA.COM>
13933 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13934 go225|go-225|Graphon 225,
13935 OTbs, am, mir, xenl,
13936 cols#80, it#8, lines#25, vt#3,
13937 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13938 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13939 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13940 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13941 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13942 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13943 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13944 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13945 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13946 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13947 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13948 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13950 #### Harris (Beehive)
13952 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13953 # Their terminal group is ancient history now (1995) though the parent
13954 # company is still in business.
13957 # Beehive documentation is undated and marked Preliminary and has no figures
13958 # so we must have early Superbee2 (Model 600, according to phone conversation
13959 # with mfr.). It has proved reliable except for some missing padding
13960 # (notably after \EK and <nl> at bottom of screen).
13962 # The key idea is that AEP mode is poison for <cup> & that US's in
13963 # the local memory should be avoided like the plague. That means
13964 # that the 2048 character local buffer is used as 25 lines of 80
13965 # characters, period. No scrolling local memory, folks. It also
13966 # appears that we cannot use naked INS LINE feature since it uses
13967 # US. The sbi fakes <il1> with an 80-space insert that may be too
13968 # slow at low speeds; also spaces get converted to \040 which is
13969 # too long for some programs (not vi). DEL LINE is ok but slow.
13971 # The <nl> string is designed for last line of screen ONLY; cup to
13972 # 25th line corrects the motion inherent in scrolling to Page 1.
13974 # There is one understood bug. It is that the screen appears to
13975 # pop to a new (blank) page after a <nel>, or leave a half-line
13976 # ellipsis to a quad that is the extra 48 memory locations. The
13977 # data received is dumped into memory but not displayed. Not to
13978 # worry if <cup> is being used; the lines not displayed will be,
13979 # whenever the cursor is moved up there. Since <cup> is addressed
13980 # relative to MEMORY of window, nothing is lost; but beware of
13981 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13982 # therefore, is setenv MORE -c .
13984 # WARNING: Not all features tested.
13986 # Timings are assembled from 3 sources. Some timings may reflect
13987 # SB2/Model 300 that were used if more conservative.
13988 # Tested on a Model 600 at 1200 and 9600 bd.
13990 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13991 # placed on the keyboard and useless because of AEP, is made
13992 # into a backspace key. In use ESC must be pressed twice (to send)
13993 # and sending ^C must be prefixed by ESC to avoid that weird
13994 # transmit mode associated with ENTER key.
13996 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13997 # the screen, then it has dropped into ENTER mode; hit
13998 # RESET--ONLINE--!tset.
14000 # As delivered this machine has a FATAL feature that will throw
14001 # it into that strange transmit state (SPOW) if the space bar is
14002 # hit after a CR is received, but before receiving a LF (or a
14005 # The circuits MUST be modified to eliminate the SPOW latch.
14006 # This is done by strapping on chip A46 of the I/O board; cut
14007 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
14008 # chip. This mod has been checked out on a Mod 600 of Superbee II.
14009 # With this modification absurdly high timings on cr are
14012 # NOTE WELL that the rear panel switch should be set to CR/LF,
14015 sb1|beehive superbee,
14016 OTbs, am, bw, da, db, mir, ul, xsb,
14017 cols#80, lines#25, xmc#1,
14018 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
14019 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
14020 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
14021 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
14022 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
14023 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
14024 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
14025 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
14026 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
14027 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
14028 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
14029 smso=\E_1, smul=\E_0, tbc=\E3,
14030 sbi|superbee|beehive superbee at Indiana U.,
14032 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
14034 # Alternate (older) description of Superbee - f1=escape, f2=^C.
14035 # Note: there are at least 3 kinds of superbees in the world. The sb1
14036 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
14037 # The sb3 puts garbage on the bottom of the screen when you scroll with
14038 # the switch in the back set to CRLF instead of AEP. This description
14039 # is tested on the sb2 but should work on all with either switch setting.
14040 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
14041 # the other two if you want to try to hit that tiny escape key.
14042 # This description is tricky: being able to use cup depends on there being
14043 # 2048 bytes of memory and the hairy <nl> string.
14044 superbee-xsb|beehive super bee,
14046 cols#80, it#8, lines#25,
14047 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
14048 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
14049 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14050 home=\EH, ht=^I, hts=\E1,
14051 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14052 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14053 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14054 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14055 # This loses on lines > 80 chars long, use at your own risk
14056 superbeeic|super bee with insert char,
14057 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14058 sb2|sb3|fixed superbee,
14059 xsb@, use=superbee,
14061 #### Beehive Medical Electronics
14063 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14064 # Regarding your question though; Beehive terminals weren't made by Harris.
14065 # They were made by Beehive Medical Electronics in Utah. They went out of
14066 # business in the early '80s.
14068 # (OK, then, I don't know why a couple of these say "harris beehive".)
14071 # Reports are that most of these Beehive entries (except superbee) have not
14072 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14074 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14075 beehive|bee|harris beehive,
14078 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14079 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14080 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14081 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14082 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14083 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14084 smir=\EQ, smso=\EdP, smul=\Ed`,
14085 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14086 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14087 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14088 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14089 # really care, cook up one using ^F -- esr)
14090 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14092 cols#80, it#8, lines#20,
14093 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14094 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14095 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14096 beehive4|bh4|beehive 4,
14099 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14100 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14101 # There was an early Australian kit-built computer called a "Microbee".
14102 # It's not clear whether this is for one of those or for a relative
14104 microb|microbee|micro bee series,
14106 cols#80, it#8, lines#24,
14107 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14108 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14109 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14110 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14111 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14112 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14114 # 8675, 8686, and bee from Cyrus Rahman
14115 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14116 ha8675|harris 8675,
14117 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14118 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14119 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14120 kf8=\177, kf9=\Ee, use=bee,
14121 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14123 ha8686|harris 8686,
14124 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14125 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14126 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14127 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14128 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14133 # Hazeltine appears to be out of the terminal business as of 1995. These
14134 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14135 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14139 # 450 East Pulaski Road
14140 # Greenlawn, New York 11740
14142 # As late as 1993, manuals for the terminal product line could still be
14145 # TRW Customer Service Division
14148 # Fairfield, NJ 07007-2078
14150 # They're now (1998) a subsidiary of General Electric, operating under the
14151 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14152 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14155 # Since <cuf1> is blank, when you want to erase something you
14156 # are out of luck. You will have to do ^L's a lot to
14157 # redraw the screen. h1000 is untested. It doesn't work in
14158 # vi - this terminal is too dumb for even vi. (The code is
14159 # there but it isn't debugged for this case.)
14160 hz1000|hazeltine 1000,
14163 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14165 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14166 hz1420|hazeltine 1420,
14169 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14170 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14171 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14173 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14174 # freakout with out-of-range args and tn3270. No hz since it needs to
14176 hz1500|hazeltine 1500,
14179 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14180 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14181 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14182 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14183 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14184 # h1510 assumed to be in sane escape mode. Else use h1500.
14185 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14186 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14187 # removed incorrect and overridden ":do=^J:" -- esr)
14188 hz1510|hazeltine 1510,
14191 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14192 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14193 el=\E^O, il1=\E^Z, ind=^J,
14195 # The following switch settings are assumed for normal operation:
14196 # FULL CR U/L_CASE ESCAPE
14197 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14198 # Other switches may be set for operator convenience or communication
14200 hz1520|Hazeltine 1520,
14201 OTbs, am, bw, msgr,
14203 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14204 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14205 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14206 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14207 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14208 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14209 # This version works with the escape switch off
14210 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14211 hz1520-noesc|hazeltine 1520,
14214 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14215 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
14216 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
14217 # Note: the h1552 appears to be the first Hazeltine terminal which
14218 # is not braindamaged. It has tildes and backprimes and everything!
14219 # Be sure the auto lf/cr switch is set to cr.
14220 hz1552|hazeltine 1552,
14222 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
14223 lf2=red, lf3=green, use=vt52,
14224 hz1552-rv|hazeltine 1552 reverse video,
14225 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
14226 # Note: h2000 won't work well because of a clash between upper case and ~'s.
14227 hz2000|hazeltine 2000,
14230 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
14231 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
14232 il1=~\032$<6>, ind=^J, pad=\177,
14233 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
14234 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
14235 # to work ok. There is one problem though if one types a lot of garbage
14236 # characters very fast vi seems not able to keep up and hangs while trying
14237 # to insert. That's in insert mode while trying to insert in the middle of
14238 # a line. It might be because the Esprit doesn't have insert char and delete
14239 # char as a built in function. Vi has to delete to end of line and then
14240 # redraw the rest of the line.
14241 esprit|Hazeltine Esprit I,
14244 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
14245 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14246 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
14247 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
14248 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
14249 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
14250 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
14251 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
14252 esprit-am|hazeltine esprit auto-margin,
14254 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
14255 # Vi it seems always wants to send a control J for "do" and it turned out
14256 # that the terminal would work somewhat if the auto LF/CR was turned off.
14257 # (hmod1: removed :dn=~^K: -- esr)
14258 hmod1|Hazeltine Modular 1,
14261 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14262 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
14263 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
14264 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
14266 # Hazeltine Executive 80 Model 30 (1554?)
14267 # from Will Martin <control@ALMSA-1.ARPA> via BRL
14268 # Like VT100, except for different "am" behavior.
14269 hazel|exec80|h80|he80|Hazeltine Executive 80,
14271 cols#80, it#8, lines#24, vt#3,
14272 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
14273 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14274 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
14275 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
14276 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
14277 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
14278 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14279 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
14280 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
14281 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
14282 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14283 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
14289 ibm327x|line mode IBM 3270 style,
14291 clear=^M^J, el=^M, home=^M,
14293 ibm3101|i3101|IBM 3101-10,
14296 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14297 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14298 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
14299 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
14300 ibm3151|IBM 3151 display,
14301 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
14302 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
14303 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
14304 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
14305 # removed kend, knp, kpp -TD
14306 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
14307 OTbs, am, mir, msgr,
14308 cols#80, it#8, lines#24,
14309 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
14310 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
14311 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14312 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
14313 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
14314 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
14315 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
14316 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
14317 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
14318 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
14319 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
14320 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
14321 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
14322 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
14323 rmso=\E4@, rmul=\E4@,
14324 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
14325 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
14327 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
14328 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
14329 ibm3162|IBM 3162 display,
14330 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
14331 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
14334 # This really should not use setab/setaf, but it is clear that the
14335 # original terminfo does not toggle red/blue colors as in setb/setf.
14336 ibm3164|i3164|IBM 3164,
14338 colors#8, pairs#64,
14339 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
14340 setab=\E4 %p1%{64}%+%c,
14341 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
14342 smcup=\E!9/N\E>B, use=ibm3161,
14344 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
14346 cols#80, it#8, lines#25,
14347 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14348 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14349 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14350 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14351 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
14352 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
14353 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
14354 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
14355 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14356 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
14357 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
14358 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
14359 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
14360 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
14361 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
14362 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
14363 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
14364 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
14365 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14366 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
14367 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
14368 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
14369 rmso=\E[m, rmul=\E[m, rs2=\Ec,
14370 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
14371 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14373 ibmaed|IBM Experimental display,
14374 OTbs, am, eo, msgr,
14375 cols#80, it#8, lines#52,
14376 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
14377 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14378 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
14379 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14380 rmso=\E0, sgr0=\E0, smso=\E0,
14381 ibm-apl|apl|IBM apl terminal simulator,
14382 lines#25, use=dm1520,
14383 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
14384 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
14385 ibmmono|IBM workstation monochrome,
14387 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
14388 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
14389 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
14390 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
14391 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
14392 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
14394 ibmega|IBM Enhanced Color Display,
14395 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14396 nel=^M^J, use=ibmmono,
14397 # This color scheme is assumed in some recent IBM terminal descriptions
14398 # (green on black, emulated on a 16-color terminal).
14399 ibm+color|IBM color definitions,
14400 colors#8, ncv#3, pairs#64,
14402 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
14403 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
14404 ibm+16color|IBM aixterm color definitions,
14405 colors#16, pairs#256,
14406 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
14407 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
14408 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14409 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14410 ibm5154|IBM 5154 Color display,
14411 colors#8, ncv@, pairs#64,
14412 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14414 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
14415 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
14417 ibmvga-c|IBM VGA display color termcap,
14418 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14419 nel=^M^J, use=ibmega-c,
14420 ibmvga|IBM VGA display,
14421 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14422 nel=^M^J, use=ibmega,
14423 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
14424 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
14426 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
14427 ibm6155|IBM 6155 Black & White display,
14428 blink@, bold@, use=ibm5151,
14429 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
14430 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
14432 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
14433 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
14435 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
14437 ibm6154|IBM 6154 Color displays,
14438 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14439 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14440 sgr0=\E[0;10m, use=ibm5154,
14441 ibm6153|IBM 6153 Black & White display,
14442 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14443 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14444 sgr0=\E[0;10m, use=ibm5151,
14445 ibm6153-90|IBM 6153 Black & White display,
14447 blink@, bold@, use=ibm5151,
14448 ibm6153-40|IBM 6153 Black & White display,
14449 cols#40, lines#12, use=ibm6153-90,
14450 ibm8512|ibm8513|IBM color VGA Terminal,
14452 cols#80, it#8, lines#25,
14453 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
14454 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
14455 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
14456 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
14457 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
14458 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
14459 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14460 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
14461 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
14462 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
14463 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
14464 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
14465 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14467 hft-c|HFT with Color,
14468 colors#8, pairs#64,
14469 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
14470 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
14471 use=ibm5151, use=ibm+color,
14472 hft-c-old|HFT with Color PC850,
14473 colors#8, pairs#64,
14474 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14476 hft-old|AIWS High Function Terminal,
14479 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14480 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14481 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14482 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
14483 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14484 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
14485 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14486 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
14487 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
14488 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14489 ibm-system1|system1|ibm system/1 computer,
14492 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
14493 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
14495 # lft-pc850 : IBM Low Function Terminal Device
14496 # lft "supports" underline, bold, and blink in the sense that the lft code
14497 # sets all the right bits. HOWEVER, depending upon the adapter, these
14498 # attributes may or may not be supported by the device driver.
14499 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
14501 cols#80, it#8, lines#25,
14502 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14503 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14504 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14505 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14506 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14507 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
14508 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
14509 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
14510 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
14511 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
14512 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
14513 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
14514 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
14515 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
14516 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
14517 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
14518 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
14519 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
14520 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14521 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
14522 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
14523 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
14524 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
14525 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14526 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14528 # "Megapel" refers to the display adapter, which was used with the IBM RT
14530 ibm5081|hft|IBM Megapel Color display,
14531 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
14532 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14533 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
14536 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
14538 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
14540 ibm8514|IBM 8514/a color VGA display,
14542 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14543 ibm8514-c|IBM 8514 color display with standout and underline,
14546 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
14547 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
14551 # AIX entries. IBM ships these with AIX 3.2.5.
14552 # -- added rc, sc based on manpage -TD
14553 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14554 aixterm|IBM Aixterm Terminal Emulator,
14556 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14557 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14558 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14559 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14560 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
14562 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14563 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
14564 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14565 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14566 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
14568 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
14569 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14570 tsl=\E[?%p1%dT, use=ibm6153,
14571 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
14572 acsc@, use=aixterm,
14573 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
14574 acsc@, use=aixterm-m,
14576 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
14577 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
14578 use=ibm+16color, use=aixterm,
14580 #### Infoton/General Terminal Corp.
14583 # gt100 sounds like something DEC would come out with. Let's hope they don't.
14584 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
14587 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14588 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
14589 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
14590 ind=^J, rmso=\Ea, smso=\Eb,
14594 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14595 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
14596 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
14597 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
14598 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
14602 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
14603 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
14604 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
14608 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
14609 ed=^K, ind=^J, ll=^H^\,
14611 # The ICL6402 was actually the Kokusai Display System 6402.
14612 # The 6404 was the KDS7372 (color version of the 6402).
14614 # ICL6404 control codes follow:
14617 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14618 #ctrl-A set SOM position at cursor position
14624 #ctrl-L Cursor right
14625 #ctrl-M Carriage return
14626 #ctrl-N Disable xon/xoff to host
14627 #ctrl-O Enable xon/xoff to host
14628 #ctrl-R Enable bidirectional mode
14629 #ctrl-T Disable bidirectional mode
14630 #ctrl-V Cursor down
14631 #ctrl-Z Clear unprotected data to insert char
14632 #ctrl-^ Cursor home
14635 #ESC lead-in char for multiple character command
14637 #ESC space R execute power on sequence
14638 #ESC ! p1 p2 define scroll region:
14639 # p1 = scroll top line: 20h - 37h
14640 # p1 = scroll bottom line: 20h - 37h
14641 #ESC " unlock keyboard
14642 #ESC # lock keyboard
14643 #ESC $ Semi-graphics mode on
14644 #ESC % Semi-graphics mode off
14645 #ESC & protect mode on
14646 #ESC ' protect mode off
14647 #ESC ( write protect mode off (full intensity)
14648 #ESC ) write protect mode on (half intensity)
14650 #ESC * clear screen
14651 #ESC + clear unprotected data to insert char
14652 #ESC , clear unprotected data to half intensity spaces
14653 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14654 # p1 = page number 0 - 3
14655 # p2 = row 20h - 7fh
14656 # p3 = column (lo) 20h - 7fh
14657 # p4 = column (hi) 20h - 21h (only 132 col)
14658 #ESC . p1 set cursor style:
14659 # p1 = 0 invisible cursor
14660 # p1 = 1 block blinking cursor
14661 # p1 = 2 block steady cursor
14662 # p1 = 3 underline blinking cursor
14663 # p1 = 4 underline steady cursor
14664 #ESC / transmit cursor location (page, row, column)
14665 #ESC 0 p1 p2 p3 p4 program edit key:
14666 # p1 = edit key code: '@'-'S', '`'-'s'
14667 # p2 p3 p4 = program data (3 bytes)
14670 #ESC 2 clear tab at cursor
14671 #ESC 3 clear all tabs
14672 #ESC 4 send unprotect line to cursor
14673 #ESC 5 send unprotect page to cursor
14674 #ESC 6 send line to cursor
14675 #ESC 7 send page to cursor
14676 #ESC 8 n set scroll mode:
14677 # n = 0 set jump scroll
14678 # n = 1 set smooth scroll
14679 #ESC 9 n control display:
14680 # n = 0 display off
14682 #ESC : clear unprotected data to null
14683 #ESC ; clear unprotected data to insert char
14686 #ESC = p1 p2 address cursor to row, column
14687 # p1 = row 20h - 7fh
14688 # p2 = column (lo) 20h - 7fh
14689 # p3 = column (hi) 20h - 21h (only 132 col)
14690 #ESC > keyclick off
14691 #ESC ? transmit cursor location (row, column)
14693 #ESC @ copy print mode on
14694 #ESC A copy print mode off
14695 #ESC B block mode on
14696 #ESC C block mode off (conversation mode)
14697 #ESC D F set full duplex
14698 #ESC D H set half duplex
14700 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14701 # 0 = black, 1 = red, 2 = green, 3 = yellow
14702 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14703 #ESC G n set serial field attribute (n = 30h - 3Fh)
14704 #ESC H n full graphics mode:
14705 # n = 0 exit full graphics mode
14706 # n = 1 enter full graphics mode
14709 #ESC K forward page
14711 #ESC L unformatted page print
14712 #ESC M L move window left (132 col mode only)
14713 #ESC M R move window right (132 col mode only)
14714 #ESC N set page edit (clear line edit)
14715 #ESC O set line edit (clear page edit)
14716 #ESC P formatted page print
14717 #ESC Q character insert
14719 #ESC S send message unprotected only
14720 #ESC T erase line to insert char
14721 #ESC U set monitor mode (see ESC X, ESC u)
14723 #ESC V n select video attribute mode:
14724 # n = 0 serial field attribute mode
14725 # n = 1 parallel character attribute mode
14726 #ESC V 2 n define line attribute:
14727 # n = 0 single width single height
14728 # n = 1 single width double height
14729 # n = 2 double width single height
14730 # n = 3 double width double height
14731 #ESC V 3 n select character font:
14732 # n = 0 system font
14733 # n = 1 user defined font
14734 #ESC V 4 n select screen mode:
14735 # n = 0 page screen mode
14736 # n = 1 virtual screen mode
14737 #ESC V 5 n control mouse mode:
14738 # n = 0 disable mouse
14739 # n = 1 enable sample mode
14740 # n = 2 send mouse information
14741 # n = 3 enable request mode
14742 #ESC W character delete
14743 #ESC X clear monitor mode (see ESC U, ESC u)
14744 #ESC Y erase page to insert char
14746 #ESC Z n send user/status line:
14747 # n = 0 send user line
14748 # n = 1 send status line
14749 # n = 2 send terminal ID
14750 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14754 # 3 = blink blank (= blank)
14756 # 5 = reverse blank
14757 # 6 = reverse blink
14758 # 7 = reverse blink blank (= reverse blank)
14760 # 9 = underline blank
14761 # : = underline blink
14762 # ; = underline blink blank
14763 # < = reverse underline
14764 # = = reverse underline blank
14765 # > = reverse underline blink
14766 # ? = reverse underline blink blank
14767 # p2, p3: f/grnd, b/grnd colour
14768 # (see ESC F for colours)
14769 # use ZZ for mono, eg.
14770 # ESC [ 0 Z Z for normal
14771 # ESC [ 4 Z Z for inverse etc.
14773 #ESC \ n set page size:
14774 # n = 1 24 lines/page
14775 # n = 2 48 lines/page
14776 # n = 3 72 lines/page
14777 # n = 4 96 lines/page
14778 #ESC ] n set Wordstar mode:
14779 # n = 0 normal (KDS7372) mode
14780 # n = 1 Wordstar mode
14782 #ESC b set foreground colour screen
14784 #ESC c n enter self-test mode:
14785 # n = 0 exit self test mode
14789 # n = 4 screen display test
14790 # n = 5 main/printer port test
14791 # n = 6 mouse port test
14792 # n = 7 graphics board test
14793 # n = 8 graphics memory test
14794 # n = 9 display all 'E'
14795 # n = : display all 'H'
14796 #ESC d set background colour screen
14798 #ESC e n program insert char (n = insert char)
14799 #ESC f text CR load user status line with 'text'
14801 #ESC g display user status line on 25th line
14802 #ESC h display system status line on 25th line
14804 #ESC j reverse linefeed
14805 #ESC k n duplex/local edit mode:
14806 # n = 0 duplex edit mode
14807 # n = 1 local edit mode
14808 #ESC l n select virtual screen:
14811 #ESC m save current config to NVRAM
14812 #ESC n p1 select display screen:
14817 #ESC o p1 p2 set characters/line and attribute:
14818 # p1 = 0 80 chars/line
14820 #ESC o p1 p2 set characters/line and attribute:
14821 # p1 = 0 80 chars/line
14822 # p1 = 1 132 chars/line
14823 # p2 = 0 single width single height
14824 # p2 = 1 single width double height
14825 # p2 = 2 double width single height
14826 # p2 = 3 double width double height
14828 #ESC q insert mode on
14829 #ESC r edit mode on
14830 #ESC s send message all
14831 #ESC t erase line to null
14832 #ESC u clear monitor mode (see ESC U, ESC X)
14833 #ESC v autopage mode on
14834 #ESC w autopage mode off
14835 #ESC x p1 p2 p3 define delimiter code...
14836 #ESC y erase page to null
14838 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14839 # p1 = starting row
14840 # p2 = starting column
14844 #ESC { p1 p2 p3 p4 configure main port
14845 # (baud, stop bits, parity, word length)
14847 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14848 # p1 = function key code:
14849 # '1' - ';' normal f1- f11
14850 # '<' - 'F' shifted f1 - f11
14851 # p2 = program mode:
14855 # Ctrl-Y = terminator
14856 # (use Ctrl-P to escape ^P, ^Y )
14858 #ESC } p1 p2 p3 p4 configure printer port
14859 # (baud, stop bits, parity, word length)
14860 #ESC ~ send system status
14862 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14864 # Entry is by esr going solely on above information and is UNTESTED.
14865 # This actually looks a lot like a Televideo 9xx.
14866 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14867 # to make color work without a test terminal. The <am> capability is a guess.
14868 # The initialization string sets conversation mode, blinking underline cursor,
14869 # full duplex, parallel attribute mode, display user status line, white
14870 # foreground, black background, normal highlight.
14872 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14875 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14877 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14878 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14879 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14880 hts=\E1, il1=\EE, invis=\E[1ZZ,
14881 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14882 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14883 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14884 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
14885 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14886 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14887 rs2=\Eo1, use=icl6404,
14889 #### Interactive Systems Corp
14891 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14892 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14893 # bought out by Sun.
14896 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14897 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14898 # ":le=^_:" later overridden -- esr)
14899 intext|Interactive Systems Corporation modified owl 1200,
14901 cols#80, it#8, lines#24, xmc#1,
14902 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14903 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14904 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14905 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14906 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14907 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14908 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14909 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14911 intext2|intextii|INTERACTIVE modified owl 1251,
14913 cols#80, lines#24, xmc#0,
14914 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
14915 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14916 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14917 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14918 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14919 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14920 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14921 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14922 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14923 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14924 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14927 #### Kimtron (abm, kt)
14929 # Kimtron seems to be history, but as March 1998 these people are still
14930 # offering repair services for Kimtron equipment:
14932 # Com/Pair Monitor Service
14933 # 1105 N. Cliff Ave.
14934 # Sioux Falls, South Dakota 57103
14936 # WATS voice: 1-800/398-4946
14937 # POTS fax: +1 605/338-8709
14938 # POTS voice: +1 605/338-9650
14939 # Email: <compair@sd.cybernex.net>
14940 # Internet/Web: <http://www.com-pair.com>
14942 # Kimtron entries include (undocumented) codes for: enter dim mode,
14943 # enter bold mode, enter reverse mode, turn off all attributes.
14946 # Kimtron ABM 85 added by Dual Systems
14947 # (abm85: removed duplicated ":kd=^J:" -- esr)
14948 abm85|Kimtron ABM 85,
14949 OTbs, am, bw, msgr,
14950 cols#80, it#8, lines#24, xmc#1,
14951 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14952 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14953 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14954 if=/usr/share/tabset/stdcrt, il1=\EE,
14955 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14956 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14957 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14958 # Kimtron ABM 85H added by Dual Systems.
14959 # Some notes about the abm85h entries:
14960 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14961 # firmware revs prior to SP51
14962 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14963 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14964 # in some places and NOT software settable i.e., <is2> can't fix it)
14965 # 3) In 85h mode, the arrow keys and special functions transmit when
14966 # the terminal is in dup-edit, and work only locally in local-edit.
14967 # Vi won't swallow `del char' for instance, but <smcup> turns on
14968 # dup-edit anyway so that the arrow keys will work right. If the
14969 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14970 # <is2>. Note that 920E mode does not have software commands to toggle
14971 # between dup and local edit, so you get whatever was set last on the
14973 # 4) <flash> attribute is nice, but seems too slow to work correctly
14975 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14976 # are selected, the <xmc@> entry should be removed.
14977 # 6) auto new-line should be on (selectable from setup mode only)
14979 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14980 abm85h|Kimtron ABM 85H native mode,
14983 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14985 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14986 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14988 abm85e|Kimtron ABM 85H in 920E mode,
14990 bel=^G, dim=\E), flash@,
14991 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14992 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14993 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14996 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14997 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14998 # From: <malman@bbn-vax.arpa>
14999 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
15000 kt7|kimtron model kt-7,
15002 cols#80, it#8, lines#24,
15003 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
15004 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15005 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
15006 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
15007 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
15008 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
15009 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15010 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15011 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
15012 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
15013 # other kt7 entry and the adjacent key capabilities). Removed EE which is
15014 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
15015 # but we can't figure out what.
15016 kt7ix|kimtron model kt-7 or 70 in IX mode,
15018 cols#80, it#8, lines#25,
15019 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
15020 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
15021 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15022 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
15023 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
15024 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
15025 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
15026 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15027 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15028 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
15029 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
15030 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
15032 #### Microdata/MDIS
15034 # This was a line of terminals made by McDonnell-Douglas Information Systems.
15035 # These entries come direct from MDIS documentation. I have edited them only
15036 # to move primary names of the form p[0-9] * to aliases, and to comment out
15037 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
15038 # also removed the change history; the last version indicates this is
15039 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
15042 # McDonnell Information Systems Terminal Family History
15043 # =========================================
15045 # Prism-1, Prism-2 and P99:
15046 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
15048 # Prism-4 and Prism-5:
15049 # Slightly less ancient range of Microdata terminals. Follow-on from
15050 # Prism-2, but with many enhancements. P5 has eight display pages.
15053 # A special terminal for use with library systems, primarily in Germany.
15054 # Limited numbers. Similar functionality to P5 (except attributes?).
15056 # Prism-7, Prism-8 and Prism-9:
15057 # More recent range of MDIS terminals, in which P7 and P8
15058 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15059 # The P9 has two emulation modes - P8 and ANSI - and includes a
15060 # large number of the DEC VT220 control sequences. Both
15061 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15063 # Prism-12 and Prism-14:
15064 # Latest range, functionally very similar to the P9. The P14 has a
15065 # black-on-white overscanning screen.
15067 # The terminfo definitions given here are:
15069 # p2 - Prism-2 (or Prism-1 or P99).
15071 # p4 - Prism-4 (and older P7s & P8s).
15072 # p5 - Prism-5 (or Prism-6).
15075 # p8 - Prism-8 (in national or multinational mode).
15076 # p8-w - 132 column version of p8.
15077 # p9 - Prism-9 in ANSI mode.
15078 # p9-w - 132 column version of p9.
15079 # p9-8 - Prism-9 in Prism-8 emulation mode.
15080 # p9-8-w - As p9-8, but with 132 columns.
15082 # p12 - Prism-12 in ANSI mode.
15083 # p12-w - 132 column version of p12.
15084 # p12-m - Prism-12 in MDC emulation mode.
15085 # p12-m-w - As p12-m, but with 132 columns.
15086 # p14 - Prism-14 in ANSI mode.
15087 # p14-w - 132 column version of p14.
15088 # p14-m - Prism-14 in MDC emulation mode.
15089 # p14-m-w - As p14-m, but with 132 columns.
15094 # Includes Prism-1 and basic P99 without SP or MP loaded.
15095 # The simplest form of Prism-type terminal.
15096 # Basic cursor movement and clearing operations only.
15097 # No video attributes.
15099 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15100 # value up, followed by backspace.
15102 prism2|MDC Prism-2,
15105 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15106 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15107 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15108 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15109 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15114 # Includes early versions of P7 & P8.
15115 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15117 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15118 # value up, followed by backspace.
15119 # Cursor key definitions removed because they interfere with vi and csh keys.
15121 prism4|p4|P4|MDC Prism-4,
15122 am, bw, hs, mc5i, msgr,
15123 cols#80, lines#24, wsl#72, xmc#1,
15124 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15125 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15126 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15127 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15128 fsl=^]\345, home=^A,
15129 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15130 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15131 rev=^CD, rmso=^C\s, rmul=^C\s,
15132 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15133 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15134 vpa=\013%p1%{32}%+%c,
15139 # Same definition as p4. Includes Prism-6 (not tested!).
15140 # Does not use any multi-page features.
15142 prism5|p5|P5|MDC Prism-5,
15148 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15150 # Use p4 for very early models of P7.
15151 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15153 prism7|p7|P7|MDC Prism-7,
15154 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15159 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15160 # Supports national and multinational character sets.
15162 # Alternate char set operations only work in multinational mode.
15163 # Use p4 for very early models of P8.
15164 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15165 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15167 prism8|p8|P8|MDC Prism-8,
15168 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15169 vpa=\E[%i%p1%dd, use=p4,
15171 # p8-w: Prism-8 in 132 column mode
15172 # --------------------------------
15174 # 'Wide' version of p8.
15176 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15178 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15180 is2=\E[<12h\E[<14h, use=p8,
15182 # p9: Prism-9 in ANSI mode
15183 # -------------------------
15185 # The "flagship" model of this generation of terminals.
15186 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15188 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15189 # Fixes to deal with terminal firmware bugs:
15190 # . 'ri' uses insert-line since rev index doesn't always
15191 # . 'sgr0' has extra '0' since esc[m fails
15192 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15193 # Not covered in the current definition:
15195 # . Programming Fn keys
15196 # . Graphic characters (defaults correctly to vt100)
15197 # . Padding values (sets xon)
15198 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15200 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15201 am, bw, hs, msgr, xenl, xon,
15202 cols#80, it#8, lines#24, vt#3, wsl#72,
15203 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15204 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15205 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15206 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15207 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15208 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15209 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15210 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15211 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15212 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15213 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15214 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
15215 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
15216 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
15217 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
15218 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
15219 rmso=\E[27m, rmul=\E[24m,
15220 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
15222 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
15223 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15224 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
15227 # p9-w: Prism-9 in 132 column mode
15228 # --------------------------------
15230 # 'Wide' version of p9.
15232 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
15234 is2=\E[&p\E[<12l\E F\E[<14h,
15235 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
15237 # p9-8: Prism-9 in P8 mode
15238 # ------------------------
15240 # P9 terminal in P8 emulation mode.
15241 # Similar to p8 definition.
15242 # Insertion and deletion operations possible.
15244 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
15245 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15246 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
15248 # p9-8-w: Prism-9 in P8 and 132 column modes
15249 # ------------------------------------------
15251 # P9 terminal in P8 emulation mode and 132 column mode.
15253 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
15254 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15255 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
15257 # p12: Prism-12 in ANSI mode
15258 # ---------------------------
15260 # See p9 definition.
15262 prism12|p12|P12|MDC Prism-12 in ANSI mode,
15265 # p12-w: Prism-12 in 132 column mode
15266 # ----------------------------------
15268 # 'Wide' version of p12.
15270 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
15273 # p12-m: Prism-12 in MDC emulation mode
15274 # -------------------------------------
15276 # P12 terminal in MDC emulation mode.
15277 # Similar to p8 definition.
15278 # Insertion and deletion operations possible.
15280 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
15283 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
15284 # -------------------------------------------------------
15286 # P12 terminal in MDC emulation mode and 132 column mode.
15288 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
15291 # p14: Prism-14 in ANSII mode
15292 # ---------------------------
15294 # See p9 definition.
15296 prism14|p14|P14|MDC Prism-14 in ANSII mode,
15299 # p14-w: Prism-14 in 132 column mode
15300 # ----------------------------------
15302 # 'Wide' version of p14.
15304 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
15307 # p14-m: Prism-14 in MDC emulation mode
15308 # -------------------------------------
15310 # P14 terminal in MDC emulation mode.
15311 # Similar to p8 definition.
15312 # Insertion and deletion operations possible.
15314 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
15317 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
15318 # -------------------------------------------------------
15320 # P14 terminal in MDC emulation mode and 132 column mode.
15322 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
15325 # End of McDonnell Information Systems Prism definitions
15327 # These things were popular in the Pick database community at one time
15328 # From: George Land <georgeland@aol.com> 24 Sep 1996
15329 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
15331 cols#80, lines#24, ma#1, wsl#78, xmc#1,
15332 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
15333 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
15334 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
15335 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
15336 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
15337 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
15338 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15339 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
15340 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
15341 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
15344 #### Microterm (act, mime)
15346 # The mime1 entries refer to the Microterm Mime I or Mime II.
15347 # The default mime is assumed to be in enhanced act iv mode.
15350 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
15351 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
15352 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
15353 # since Sytek insists ^S means xoff.
15354 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
15355 act4|microterm|microterm act iv,
15358 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
15359 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
15360 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
15361 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
15362 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
15364 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
15365 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
15366 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
15367 act5|microterm5|microterm act v,
15368 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
15370 # Mimes using brightness for standout. Half bright is really dim unless
15371 # you turn up the brightness so far that lines show up on the screen.
15372 mime-fb|full bright mime1,
15373 is2=^S\E, rmso=^S, smso=^Y, use=mime,
15374 mime-hb|half bright mime1,
15375 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
15376 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
15377 # the more plausible ":do=^J:" -- esr)
15378 # uc was at one time disabled to get around a curses bug, be wary of it
15379 mime|mime1|mime2|mimei|mimeii|microterm mime1,
15381 cols#80, it#8, lines#24, vt#9,
15382 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
15383 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
15384 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
15385 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
15386 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
15387 # These termcaps (for mime2a) put the terminal in low intensity mode
15388 # since high intensity mode is so obnoxious.
15389 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
15392 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15393 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
15394 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
15395 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
15396 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
15397 smir=\EE, smso=\E\:, smul=\E6,
15398 # This is the preferred mode (but ^X can't be used as a kill character)
15399 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
15401 cols#80, it#8, lines#24,
15402 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15403 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
15404 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
15405 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
15406 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
15407 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
15408 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
15409 mime3a|mime1 emulating 3a,
15411 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
15412 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
15414 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
15416 # Wed Mar 9 18:53:21 1983
15417 # We run our terminals at 2400 baud, so there might be some timing problems at
15418 # higher speeds. The major improvements in this model are the terminal now
15419 # scrolls down and insert mode works without redrawing the rest of the line
15420 # to the right of the cursor. This is done with a bit of a kludge using the
15421 # exit graphics mode to get out of insert, but it does not appear to hurt
15422 # anything when using vi at least. If you have some users using act4s with
15423 # programs that use curses and graphics mode this could be a problem.
15424 mime314|mm314|mime 314,
15427 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
15428 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
15429 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
15430 # Microterm mime 340 from University of Wisconsin
15431 mm340|mime340|mime 340,
15433 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15434 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15435 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
15436 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
15437 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
15438 # This came from University of Wisconsin marked "astro termcap for jooss".
15439 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
15440 # also added <rmam>/<smam> based on the init string -- esr)
15441 mt4520-rv|micro-term 4520 reverse video,
15442 am, hs, msgr, xenl, xon,
15443 cols#80, it#8, lines#24, wsl#80,
15444 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
15445 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15446 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15447 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15448 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15449 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15450 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
15451 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15452 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
15453 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15454 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
15455 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
15456 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
15457 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
15458 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
15459 tbc=\E[g, tsl=\E[25;1H,
15461 # Fri Aug 5 08:11:57 1983
15462 # This entry works for the ergo 4000 with the following setups:
15463 # ansi,wraparound,newline disabled, xon/xoff disabled in both
15466 # WARNING!!! There are multiple versions of ERGO 4000 microcode
15467 # Be advised that very early versions DO NOT WORK RIGHT !!
15468 # Microterm does have a ROM exchange program- use it or lose big
15469 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
15470 ergo4000|microterm ergo 4000,
15473 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
15474 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15475 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
15476 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
15477 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
15478 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15479 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
15480 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
15481 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
15482 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
15487 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
15488 # For what happened to that group, see the ADDS section.
15490 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
15493 # The following vendor-supplied termcaps were captured from the Boundless
15494 # Technologies site, 8 March 1998. I removed all-upper-case names that were
15495 # identical, except for case, to lower-case ones. I also uncommented the acsc
15498 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15499 # DEC vt200/300 with color capabilities added.
15500 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15501 colors#8, pairs#64,
15502 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15504 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15505 # DEC vt200/300 with color capabilities added.
15506 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15507 colors#8, pairs#64,
15508 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15509 use=ncr260vt300wan,
15510 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15511 # DEC vt200/300 with color capabilities added.
15512 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
15513 colors#8, pairs#64,
15514 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15516 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
15517 # DEC vt200/300 with color capabilities added.
15518 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
15519 colors#8, pairs#64,
15520 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15521 use=ncr260vt300wpp,
15522 # This definition for ViewPoint supports several attributes. This means
15523 # that it has magic cookies (extra spaces where the attributes begin).
15524 # Some applications do not function well with magic cookies. The System
15525 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15526 # If supporting various attributes is not vital, 'xmc#1' and the extra
15527 # attributes can be removed.
15528 # Mapping to ASCII character set ('acsc' capability) can also be
15529 # restored if needed.
15530 ncr260vppp|NCR 2900_260 viewpoint,
15531 am, bw, hs, km, mc5i, mir, msgr, xon,
15532 cols#80, lines#24, nlab#32, xmc#1,
15533 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15534 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
15535 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
15536 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
15537 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
15538 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
15539 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
15540 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15541 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
15542 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
15543 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
15544 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
15545 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
15546 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
15547 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
15548 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
15549 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15550 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
15551 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
15552 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
15553 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
15554 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15555 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15556 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
15557 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
15558 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
15560 cup=\Ea%i%p1%dR%p2%dC$<30>,
15561 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15562 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15564 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
15565 am, hs, mir, msgr, xenl, xon,
15566 cols#80, lines#24, nlab#32,
15567 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15568 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15569 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15570 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
15571 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15572 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15573 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15574 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15575 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15576 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
15577 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
15578 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
15579 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
15581 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15582 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15583 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
15584 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
15585 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
15586 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
15587 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15589 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15590 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
15591 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
15592 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15593 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
15595 cup=\E[%i%p1%d;%p2%dH$<30>,
15596 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15597 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15599 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
15600 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15601 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15602 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15603 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
15604 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
15605 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15606 smkx=\E=, use=ncr260vt100an,
15607 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
15609 cup=\E[%i%p1%d;%p2%dH$<30>,
15610 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15611 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15613 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
15614 am, hs, mir, msgr, xenl, xon,
15615 cols#80, lines#24, nlab#32,
15616 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15617 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15618 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15619 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15620 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15621 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15622 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15623 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15624 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15625 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15626 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15627 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15628 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15629 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15630 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15631 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15632 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15633 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15634 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
15635 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
15636 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
15637 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15638 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15639 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15640 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15641 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15642 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15643 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15644 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15646 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15647 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15648 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15649 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15651 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15653 cup=\E[%i%p1%d;%p2%dH$<30>,
15654 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15655 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15657 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15658 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15659 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15660 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15661 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15663 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15665 cup=\E[%i%p1%d;%p2%dH$<30>,
15666 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15667 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15669 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15670 am, hs, mir, msgr, xenl, xon,
15671 cols#80, lines#24, nlab#32,
15672 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15673 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15674 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15675 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15676 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15677 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15678 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15679 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15680 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15681 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15682 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15683 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15684 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15685 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15686 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15687 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15688 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15689 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15690 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15691 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15692 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15693 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15694 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15695 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15696 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15697 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15698 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15700 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15702 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15703 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15704 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15705 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15707 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15709 cup=\E[%i%p1%d;%p2%dH$<30>,
15710 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15711 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15713 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15714 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15715 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15716 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15717 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15719 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15721 cup=\E[%i%p1%d;%p2%dH$<30>,
15722 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15723 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15725 # This terminfo file contains color capabilities for the Wyse325 emulation of
15726 # the NCR 2900/260C color terminal. Because of the structure of the command
15727 # (escape sequence) used to set color attributes, one of the fore/background
15728 # colors must be preset to a given value. I have set the background color to
15729 # black. The user can change this setup by altering the last section of the
15730 # 'setf' definition. The escape sequence to set color attributes is
15731 # ESC d y <foreground_color> <background_color> 1
15732 # In addition, the background color can be changed through the desk accessories.
15733 # The capablitiy 'op' sets colors to green on black (default combination).
15735 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15736 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15737 # capability and recompile if you wish to have it included.
15739 ncr260wy325pp|NCR 2900_260 wyse 325,
15740 am, bw, hs, km, mc5i, mir, msgr, xon,
15741 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15742 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15743 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15744 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15745 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15746 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15747 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15748 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15749 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15750 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15751 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15752 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15753 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15754 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15755 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15756 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15757 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15758 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15759 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15760 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15761 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15762 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15763 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15764 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15766 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15767 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15768 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15770 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15772 cup=\Ea%i%p1%dR%p2%dC$<30>,
15773 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15774 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15776 # This definition for Wyse 350 supports several attributes. This means
15777 # that it has magic cookies (extra spaces where the attributes begin).
15778 # Some applications do not function well with magic cookies. The System
15779 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15780 # If supporting various attributes is not vital, 'xmc#1' and the extra
15781 # attributes can be removed.
15782 # Mapping to ASCII character set ('acsc' capability) can also be
15783 # restored if needed.
15784 # In addition, color capabilities have been added to this file. The drawback,
15785 # however, is that the background color has to be black. The foreground colors
15786 # are numbered 0 through 15.
15788 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15789 # with the 'pairs' capability defined as below. If you wish to
15790 # have it included, Un-comment it and recompile (using 'tic').
15792 ncr260wy350pp|NCR 2900_260 wyse 350,
15793 am, bw, hs, km, mc5i, mir, msgr, xon,
15794 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15795 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15796 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15797 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15798 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15799 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15800 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15801 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15802 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15803 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15804 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15805 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15806 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15807 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15808 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15809 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15810 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15811 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15812 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15813 mc0=\EP$<10>, mc4=^T, mc5=^R,
15814 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15815 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15816 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15817 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15819 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15820 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15821 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15823 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15825 cup=\Ea%i%p1%dR%p2%dC$<30>,
15826 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15827 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15829 # This definition for Wyse 50+ supports several attributes. This means
15830 # that it has magic cookies (extra spaces where the attributes begin).
15831 # Some applications do not function well with magic cookies. The System
15832 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15833 # If supporting various attributes is not vital, 'xmc#1' and the extra
15834 # attributes can be removed.
15835 # Mapping to ASCII character set ('acsc' capability) can also be
15836 # restored if needed.
15837 # (ncr260wy50+pp: originally contained commented-out
15838 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15839 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15840 am, bw, hs, km, mc5i, mir, msgr, xon,
15841 cols#80, lines#24, nlab#32, xmc#1,
15842 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15843 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15844 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15845 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15846 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15847 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15848 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15850 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15851 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15852 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15853 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15854 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15855 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15856 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15857 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15858 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15859 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15860 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15861 mc0=\EP$<10>, mc4=^T, mc5=^R,
15862 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15863 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15864 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15865 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15866 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15867 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15868 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15870 cup=\Ea%i%p1%dR%p2%dC$<30>,
15871 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15872 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15874 ncr260wy60pp|NCR 2900_260 wyse 60,
15875 am, bw, hs, km, mc5i, mir, msgr, xon,
15876 cols#80, lines#24, nlab#32,
15877 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15878 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15879 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15880 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15881 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15882 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15883 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15885 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15886 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15887 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15888 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15889 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15890 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15891 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15892 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15893 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15894 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15895 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15896 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15897 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15898 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15899 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15900 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15901 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15902 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15904 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15906 cup=\Ea%i%p1%dR%p2%dC$<30>,
15907 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15908 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15910 ncr160vppp|NCR 2900_160 viewpoint,
15912 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15914 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15916 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15918 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15919 use=ncr260vt100wan,
15920 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15921 use=ncr260vt100wpp,
15922 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15924 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15926 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15927 use=ncr260vt200wan,
15928 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15929 use=ncr260vt200wpp,
15930 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15932 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15934 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15935 use=ncr260vt300wan,
15936 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15937 use=ncr260vt300wpp,
15938 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15940 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15941 use=ncr260wy50+wpp,
15942 ncr160wy60pp|NCR 2900_160 wyse 60,
15944 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15946 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15947 am, hs, mc5i, mir, msgr, xon,
15948 cols#80, it#8, lines#24, nlab#32,
15949 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15950 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15951 clear=\E[2J\E[1;1H$<300>, cr=^M,
15952 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15953 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15954 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15955 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15956 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15957 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15958 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15959 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15960 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15962 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15963 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15964 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15965 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15966 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15967 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15968 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15970 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15971 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15972 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15974 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15976 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15977 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15980 # Vendor-supplied NCR termcaps end here
15982 # NCR7900 DIP switches:
15986 # 5 - Parity (Odd/Even)
15987 # 6 - Don't Send or Do Send Spaces
15988 # 7 - Parity Enable
15989 # 8 - Stop Bits (One/Two)
15992 # 1 - Upper/Lower Shift
15993 # 2 - Typewriter Shift
15994 # 3 - Half Duplex / Full Duplex
15995 # 4 - Light/Dark Background
15996 # 5-6 - Carriage Return Without / With Line Feed
15997 # 7 - Extended Mode
15998 # 8 - Suppress Keyboard Display
16001 # 1 - End of line entry disabled/enabled
16002 # 2 - Conversational mode / (Local?) Mode
16003 # 3 - Control characters displayed / not displayed
16004 # 4 - (2-wire?) / 4-wire communications
16005 # 5 - RTS on and off for each character
16006 # 6 - (50Hz?) / 60 Hz
16007 # 7 - Exit after level zero diagnostics
16008 # 8 - RS-232 interface
16011 # 1 - Reverse Channel (yes / no)
16012 # 2 - Manual answer (no / yes)
16013 # 3-4 - Cursor appearance
16014 # 5 - Communication Rate
16015 # 6 - Enable / Disable EXT turnoff
16016 # 7 - Enable / Disable CR turnoff
16017 # 8 - Enable / Disable backspace
16019 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
16020 # reverse, blink, dim, and underline) the appropriate number of bits (by
16021 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
16022 # '@' is (effectively) "or"ed with each attribute to generate the proper third
16023 # character in the <ESC>0 sequence. The <sgr> string implements the following
16026 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
16027 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
16029 # Where: P1 <==> Standout attribute parameter
16030 # P2 <==> Underline attribute parameter
16031 # P3 <==> Reverse attribute parameter
16032 # P4 <==> Blink attribute parameter
16033 # P5 <==> Dim attribute parameter
16034 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
16035 ncr7900i|ncr7900|ncr 7900 model 1,
16037 cols#80, lines#24, xmc#1,
16038 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16039 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
16040 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
16041 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
16043 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
16044 sgr0=\E0@, smso=\E0Q, smul=\E0`,
16045 ncr7900iv|ncr 7900 model 4,
16048 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
16049 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
16050 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
16051 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
16052 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16053 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16054 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16055 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16056 # The user can enter a CTRL-B to get out of this locked state.
16057 # In <hpa>, we want to output the character given by the formula:
16058 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16059 ncr7901|ncr 7901 model,
16062 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16063 cub1=^H, cud1=^J, cuf1=^F,
16064 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16066 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16067 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16068 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16069 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16070 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16071 vpa=\013%p1%{64}%+%c,
16073 # Newbury Data Recording Limited (Newbury Data)
16075 # Have been manufacturing and reselling various peripherals for a long time
16076 # They don't make terminals anymore, but are still in business (in 2007).
16077 # Their e-mail address is at ndsales@newburydata.co.uk
16078 # and their post address is:
16080 # Newbury Data Recording Ltd,
16081 # Premier Park, Road One,
16082 # Winsford, Cheshire, CW7 3PT
16084 # Their technical support is still good, they sent me for free a printed copy
16085 # of the 9500 user manual and I got it just 1 week after I first contacted them
16089 # Manufactured in the early/mid eighties, behaves almost the same as a
16090 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16091 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16092 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16093 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16094 # recognized: if you type in "ESC !", the next (third) character is not
16095 # echoed, showing that the terminal was actually waiting for a parameter!
16096 ndr9500|nd9500|Newbury Data 9500,
16097 am, bw, hs, mc5i, mir, msgr, ul, xon,
16098 cols#80, lines#24, wsl#79,
16099 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16100 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16101 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16102 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16103 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16104 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16105 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16106 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16107 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16108 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16109 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16110 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16111 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16112 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16113 pfloc=\E|%{48}%p1%+%c2%p2\031,
16114 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16115 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16116 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16117 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16118 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16120 ndr9500-nl|NDR 9500 with no status line,
16123 dsl@, fsl@, tsl@, use=ndr9500,
16125 ndr9500-25|NDR 9500 with 25th line enabled,
16126 lines#25, use=ndr9500,
16128 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16129 lines#25, use=ndr9500-nl,
16131 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16134 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16135 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16136 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16138 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16139 lines#25, use=ndr9500-mc,
16141 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16144 dsl@, fsl@, tsl@, use=ndr9500-mc,
16146 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16147 lines#25, use=ndr9500-mc-nl,
16149 #### Perkin-Elmer (Owl)
16151 # These are official terminfo entries from within Perkin-Elmer.
16154 bantam|pe550|pe6100|perkin elmer 550,
16157 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16158 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16159 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16160 fox|pe1100|perkin elmer 1100,
16163 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16164 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16165 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16166 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16167 owl|pe1200|perkin elmer 1200,
16170 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16171 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16172 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16173 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16174 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16175 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16176 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16177 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16178 pe1251|pe6300|pe6312|perkin elmer 1251,
16180 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16181 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16182 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16183 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16184 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16185 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16186 # (pe7000m: this had
16187 # rmul=\E!\0, smul=\E!\040,
16188 # which is probably wrong, it collides with kf0
16189 pe7000m|perkin elmer 7000 series monochrome monitor,
16192 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16193 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16194 ed=\EJ, el=\EI, home=\EH, ind=^J,
16195 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16196 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16197 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16198 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16200 pe7000c|perkin elmer 7000 series colour monitor,
16201 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16202 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16206 # Sperry Univac has merged with Burroughs to form Unisys.
16209 # This entry is for the Sperry UTS30 terminal running the TTY
16210 # utility under control of CP/M Plus 1R1. The functionality
16211 # provided is comparable to the DEC vt100.
16212 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16213 uts30|sperry uts30 with cp/m@1R1,
16215 cols#80, lines#24, wsl#40,
16216 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16217 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
16218 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
16219 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16220 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16221 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
16222 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
16223 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
16224 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
16225 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
16226 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
16227 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
16228 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16229 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
16230 smul=\E[4m, tsl=\E], uc=\EPB,
16234 # Tandem builds these things for use with its line of fault-tolerant
16235 # transaction-processing computers. They aren't generally available
16236 # on the merchant market, and so are fairly uncommon.
16239 tandem6510|adm3a repackaged by Tandem,
16242 # A funny series of terminal that TANDEM uses. The actual model numbers
16243 # have a fourth digit after 653 that designates minor variants. These are
16244 # natively block-mode and rather ugly, but they have a character mode which
16245 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
16246 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
16247 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
16248 tandem653|t653x|Tandem 653x multipage terminal,
16249 OTbs, am, da, db, hs,
16250 cols#80, lines#24, wsl#64, xmc#1,
16251 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
16252 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
16253 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
16254 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
16256 #### Tandy/Radio Shack
16258 # Tandy has a line of VDTs distinct from its microcomputers.
16261 dmterm|deskmate terminal,
16264 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
16265 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16266 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
16267 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
16268 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
16269 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
16270 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
16271 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
16273 dt100|dt-100|Tandy DT-100 terminal,
16275 cols#80, lines#24, xmc#1,
16276 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16277 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16278 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16279 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16280 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16281 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
16282 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
16283 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
16284 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
16285 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
16286 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
16287 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
16288 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
16289 cols#132, use=dt100,
16290 dt110|Tandy DT-110 emulating ansi,
16293 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16294 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16295 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16296 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
16297 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
16298 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
16299 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
16300 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
16301 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
16302 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
16303 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
16304 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16305 smacs=^N, smso=\E[7m, smul=\E[4m,
16306 pt210|TRS-80 PT-210 printing terminal,
16309 bel=^G, cr=^M, cud1=^J, ind=^J,
16311 #### Tektronix (tek)
16313 # Tektronix tubes are graphics terminals. Most of them use modified
16314 # oscilloscope technology incorporating a long-persistence green phosphor,
16315 # and support vector graphics on a main screen with an attached "dialogue
16316 # area" for interactive text.
16319 tek|tek4012|tektronix 4012,
16322 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
16323 ff=\014$<1000>, is2=\E^O,
16324 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16325 tek4013|tektronix 4013,
16326 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
16327 tek4014|tektronix 4014,
16329 is2=\E\017\E9, use=tek4012,
16330 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16331 tek4015|tektronix 4015,
16332 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
16333 tek4014-sm|tektronix 4014 in small font,
16334 cols#121, lines#58,
16335 is2=\E\017\E\:, use=tek4014,
16336 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16337 tek4015-sm|tektronix 4015 in small font,
16338 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
16339 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
16341 # You need to have "stty nl2" in effect. Some versions of tset(1) know
16342 # how to set it for you.
16344 # It's got the Magic Cookie problem around stand-out mode. If you can't
16345 # live with Magic Cookie, remove the :so: and :se: fields and do without
16346 # reverse video. If you like reverse video stand-out mode but don't want
16347 # it to flash, change the letter 'H' to 'P' in the :so: field.
16348 tek4023|tektronix 4023,
16350 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
16351 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
16352 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
16353 rmso=^_@, smso=^_P,
16354 # It is recommended that you run the 4025 at 4800 baud or less;
16355 # various bugs in the terminal appear at 9600. It wedges at the
16356 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
16357 # on keyboard don't work. You have to hit BREAK twice to get
16358 # one break at any speed - this is a documented feature.
16359 # Can't use cursor motion because it's memory relative, and
16360 # because it only works in the workspace, not the monitor.
16361 # Same for home. Likewise, standout only works in the workspace.
16363 # <el> was commented out since vi and rogue seem to work better
16364 # simulating it with lots of spaces!
16366 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
16367 # and didn't seem necessary.
16369 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
16371 cols#80, it#8, lines#34, lm#0,
16372 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
16373 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
16374 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
16375 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
16376 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
16377 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
16378 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
16380 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16381 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
16382 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
16383 tek4025-17|tek 4025 17 line window,
16384 lines#17, use=tek4025,
16385 tek4025-17-ws|tek 4025 17 line window in workspace,
16386 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
16387 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
16388 smso=\037att e\r, use=tek4025-17,
16389 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
16390 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
16391 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16393 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
16394 # The following status modes are assumed for normal operation (replace the
16395 # initial "!" by whatever the current command character is):
16396 # !COM 29 # NOTE: changes command character to GS (^])
16402 # ^]STO 9 17 25 33 41 49 57 65 73
16403 # Other modes may be set according to communication requirements.
16404 # If the command character is inadvertently changed, termcap can't restore it.
16405 # Insert-character cannot be made to work on both top and bottom rows.
16406 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
16407 # There also seems to be a problem with vertical motion, perhaps involving
16408 # delete/insert-line, following a typed carriage return. This terminal sucks.
16409 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16410 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
16411 # work any more. -- esr)
16412 tek4025a|Tektronix 4025A,
16413 OTbs, OTpt, am, bw, da, db, xon,
16414 cols#80, it#8, lines#34,
16415 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
16416 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
16417 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
16418 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
16419 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
16420 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
16421 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
16422 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
16424 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
16425 # Here's the command file that I use to get rogue to work on the 4025.
16426 # It should work with any program using the old curses (e.g. it better
16427 # not try to scroll, or cursor addressing won't work. Also, you can't
16429 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
16430 tek4025-cr|tek 4025 for curses and rogue,
16432 cols#80, it#8, lines#33,
16433 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
16434 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
16435 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16436 rmcup=\037wor 0, smcup=\037wor 33h,
16437 # next two lines commented out since curses only allows 128 chars, sigh.
16438 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
16439 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
16440 tek4025ex|4025ex|4027ex|tek 4025 w/!,
16441 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
16442 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16443 tek4105|tektronix 4105,
16444 OTbs, am, mir, msgr, ul, xenl, xt,
16445 cols#79, it#8, lines#29,
16446 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
16447 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
16448 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
16449 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16450 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
16451 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
16452 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
16453 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
16454 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
16455 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16456 smul=\E[=5;<2m, tbc=\E[1g,
16458 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
16459 tek4105-30|4015 emulating 30 line vt100,
16460 am, mir, msgr, xenl, xon,
16461 cols#80, it#8, lines#30, vt#3,
16462 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16463 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16464 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16465 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16466 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16467 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16468 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
16469 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
16470 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16471 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16472 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16473 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16474 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
16475 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16476 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16479 # Tektronix 4105 from BRL
16480 # The following setup modes are assumed for normal operation:
16481 # CODE ansi CRLF no DABUFFER 141
16482 # DAENABLE yes DALINES 30 DAMODE replace
16483 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
16484 # FLAGGING input INSERTREPLACE replace LFCR no
16485 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
16486 # SELECTCHARSET G1 0 TABS -2
16487 # Other setup modes may be set for operator convenience or communication
16488 # requirements; I recommend
16489 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16490 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16491 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16492 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
16493 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16494 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
16496 # and factory color maps. After setting these modes, save them with NVSAVE. No
16497 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16498 # "IC" cannot be used in combination with "im" & "ei".
16499 # "tek4105a" is just a guess:
16500 tek4105a|Tektronix 4105,
16501 OTbs, OTpt, msgr, xon,
16502 OTkn#8, cols#80, it#8, lines#30, vt#3,
16503 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16504 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16505 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16506 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16507 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16508 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16509 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16510 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16511 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16512 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16513 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16514 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16515 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16516 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16517 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16518 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16519 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16520 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16523 # Tektronix 4106/4107/4109 from BRL
16524 # The following setup modes are assumed for normal operation:
16525 # CODE ansi COLUMNMODE 80 CRLF no
16526 # DABUFFER 141 DAENABLE yes DALINES 32
16527 # DAMODE replace DAVISIBILITY yes ECHO no
16528 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
16529 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
16530 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
16532 # Other setup modes may be set for operator convenience or communication
16533 # requirements; I recommend
16534 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16535 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16536 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16537 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
16538 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16539 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
16541 # and factory color maps. After setting these modes, save them with NVSAVE. No
16542 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16543 # "IC" cannot be used in combination with "im" & "ei".
16544 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
16546 cols#80, it#8, lines#32, vt#3,
16547 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16548 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16549 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16550 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16551 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16552 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16553 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16554 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16555 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16556 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16557 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16558 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16559 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16560 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16561 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16562 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16563 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16564 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
16566 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
16567 # 0 selects Tek mode, i.e., \E%!0
16568 # 1 selects ANSI mode
16569 # 2 selects ANSI edit-mode
16570 # 3 selects VT52 mode
16572 # One odd thing about the description (which has been unchanged since the 90s)
16573 # is that the cursor addressing is using VT52 mode, and a few others use the
16574 # VT52's non-CSI versions of ANSI, e.g., \EJ.
16575 tek4107|tek4109|tektronix terminals 4107 4109,
16576 OTbs, am, mir, msgr, ul, xenl, xt,
16577 cols#79, it#8, lines#29,
16578 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
16579 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
16580 cub1=^H, cud1=^J, cuf1=\EC,
16581 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
16582 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
16583 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16584 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
16585 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
16586 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
16587 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
16588 smul=\E%!1\E[4m$<2>\E%!0,
16589 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
16590 # see the note attached to tek4207.
16591 tek4207-s|Tektronix 4207 with sysline but no memory,
16593 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
16594 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16595 is2=\E7\E[?6l\E[2K\E[?6h\E8,
16596 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16598 # The 4110 series may be a wonderful graphics series, but they make the 4025
16599 # look good for screen editing. In the dialog area, you can't move the cursor
16600 # off the bottom line. Out of the dialog area, ^K moves it up, but there
16601 # is no way to scroll.
16603 # Note that there is a floppy for free from Tek that makes the
16604 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16605 # an expected enhancement that will use ANSI standard sequences.
16607 # 4112 in non-dialog area pretending to scroll. It really wraps
16608 # but vi is said to work (more or less) in this mode.
16610 # 'vi' works reasonably well with this entry.
16612 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
16615 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
16616 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
16617 # The 4112 with the ANSI compatibility enhancement
16618 tek4112|tek4114|tektronix 4110 series,
16621 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
16622 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
16623 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
16624 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
16625 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16626 tek4112-nd|4112 not in dialog area,
16628 cuu1=^K, use=tek4112,
16629 tek4112-5|4112 in 5 line dialog area,
16630 lines#5, use=tek4112,
16631 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
16632 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
16633 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
16634 # previously \0410 and \0411 sequences...I don't *think* they were supposed
16635 # to be 4-digit octal -- esr)
16636 tek4113|tektronix 4113 color graphics with 5 line dialog area,
16639 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
16640 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16641 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
16642 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
16644 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16645 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
16646 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16647 # :vb: needs enough delay to let you see the background color being toggled.
16648 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16650 cols#80, it#8, lines#34,
16651 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16653 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16654 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16655 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16656 # This entry is from Tek. Inc. (Brian Biehl)
16657 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16658 otek4115|Tektronix 4115,
16659 OTbs, am, da, db, eo,
16660 cols#80, it#8, lines#34,
16661 cbt=\E[Z, clear=\E[H\E[2J,
16662 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16663 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16664 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16665 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16667 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16668 kbs=^H, ri=\EM, rmam=\E[?7l,
16669 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16670 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16671 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16673 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16676 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16677 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16678 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16679 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16680 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16681 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16682 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16683 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16684 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16685 rmso=\E[m, rmul=\E[m,
16686 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
16687 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16688 vpa=\E[%p1%{1}%+%dd,
16689 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16690 # command is ignored. The following entry replaces <csr> with the needed
16691 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16692 # chokes on; and adds a lot of initialization for the tek dialog area.
16693 # Note that this entry uses all 34 lines and sets the cursor color to green.
16694 # Steve Jacobson 8/85
16695 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16696 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16697 tek4125|tektronix 4125,
16699 csr@, dl1=\E[1M, il1=\E[1L,
16700 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16701 rc@, sc@, smkx=\E=, use=vt100,
16703 # From: <jcoker@ucbic>
16704 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16705 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16706 # note that if jcoker wasn't confused you may be able to use this one.
16707 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16708 tek4207|Tektronix 4207 graphics terminal with memory,
16709 am, bw, mir, msgr, ul, xenl,
16710 cols#80, it#8, lines#32,
16711 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16712 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16713 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16714 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16715 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16716 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16717 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16718 rev=\E[7m, ri=\E[T,
16719 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16720 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16721 smul=\E[4m, tbc=\E[1g,
16723 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16724 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16725 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16726 tek4404|tektronix 4404,
16728 cols#80, it#8, lines#32,
16729 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16730 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16731 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16732 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16733 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16734 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16735 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16736 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16737 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16738 # Some unknown person wrote:
16739 # I added the is string - straight Unix has ESC ; in the login
16740 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16741 # mode). The is string here cleans up a few things (but not
16743 ct8500|tektronix ct8500,
16746 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16747 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16748 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16749 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16750 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16752 # Tektronix 4205 terminal.
16754 # am is not defined because the wrap around occurs not when the char.
16755 # is placed in the 80'th column, but when we are attempting to type
16756 # the 81'st character on the line. (esr: hmm, this is like the vt100
16757 # version of xenl, perhaps am + xenl would work!)
16759 # Bold, dim, and standout are simulated by colors and thus not allowed
16760 # with colors. The tektronix color table is mapped into the RGB color
16761 # table by setf/setb. All colors are reset to factory specifications by oc.
16762 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16763 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16764 # interval then maps into pre-defined value.
16765 tek4205|tektronix 4205,
16767 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16768 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16769 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16770 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16771 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16772 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16773 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
16774 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
16775 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
16777 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16778 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16779 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16780 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16782 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16783 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16784 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16785 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16786 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16787 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16788 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16789 smul=\E[4m, tbc=\E[1g,
16791 #### Teletype (tty)
16793 # These are the hardcopy Teletypes from before AT&T bought the company,
16794 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16795 # pulpy yellow roll paper. If you remember these you go back a ways.
16796 # Teletype-branded VDTs are listed in the AT&T section.
16798 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16799 # other programs still default to emitting codes for the Model 37.
16802 tty33|tty35|model 33 or 35 teletype,
16805 bel=^G, cr=^M, cud1=^J, ind=^J,
16806 tty37|model 37 teletype,
16808 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16811 # There are known to be at least three flavors of the tty40, all seem more
16812 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16813 # awful braindamage, such as printing a visible newline indicator after each
16814 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16815 # braindamaged but has hope and is described here. The 40-4 is a 3270
16816 # lookalike and beyond hope. The terminal has visible bell but I don't know
16817 # it - it's null here to prevent it from showing the BL character.
16818 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16819 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16820 # to get crlf, even if <cr> is not ^M.)
16821 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16822 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16825 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16826 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16827 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16828 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16829 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16830 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16831 tty43|model 43 teletype,
16832 OTbs, am, hc, os, xon,
16834 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16839 # You can add <is2=\E<> to put this 40-column mode, though I can't
16840 # for the life of me think why anyone would want to.
16841 scanset|sc410|sc415|Tymshare Scan Set,
16844 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16845 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16846 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16847 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16848 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16850 #### Volker-Craig (vc)
16852 # If you saw a Byte Magazine cover with a terminal on it during the early
16853 # 1980s, it was probably one of these. Carl Helmers liked them because
16854 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16855 # to program one...)
16858 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16859 # every other linefeed.
16860 vc303|vc103|vc203|volker-craig 303,
16863 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16864 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16865 kcuu1=^N, ll=\017$<1>W,
16866 vc303a|vc403a|volker-craig 303a,
16867 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16868 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16869 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16870 vc404|volker-craig 404,
16873 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16874 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16875 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16876 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16877 vc404-s|volker-craig 404 w/standout mode,
16878 cud1=^J, rmso=^O, smso=^N, use=vc404,
16879 # From: <wolfgang@cs.sfu.ca>
16880 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16881 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16884 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16885 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16886 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16887 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16888 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16889 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16890 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16891 rmso=\E^_, smso=\E^Y,
16892 vc415|volker-craig 415,
16893 clear=^L, use=vc404,
16895 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16898 #### IBM PC and clones
16901 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16902 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16903 # doesn't support scrolling regions, ignores add line commands, and ignores
16904 # delete line commands. Consequently, the resulting behavior looks like a
16905 # crude adm3a-type terminal.
16906 # Steve Jacobson 8/85
16907 pcplot|pc-plot terminal emulation program,
16909 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16910 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16911 # I've found that my KayPro II, running MDM730, continues to emulate an
16912 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16913 # system the following termcap entry works well:
16914 # I have noticed a couple of minor glitches, but nothing I can't work
16915 # around. (I added two capabilities from the BRL entry -- esr)
16916 kaypro|kaypro2|kaypro II,
16919 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16920 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16921 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16923 # From IBM, Thu May 5 19:35:27 1983
16924 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16925 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16928 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16929 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16931 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16932 OTbs, am, bw, eo, hs, km, msgr, ul,
16933 cols#80, it#8, lines#24,
16934 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16935 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16936 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16937 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16938 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16939 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16940 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16941 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16942 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16943 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16944 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16945 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16946 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16947 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
16948 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16952 # Apple II firmware console first, then various 80-column cards and
16953 # terminal emulators. For two cents I'd toss all these in the UFO file
16954 # along with the 40-column apple entries.
16957 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16958 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16959 # function of TIC, not the firmware.
16960 # The clear key on a IIgs will do something like clear-screen,
16961 # depending on what you're in.
16962 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16963 OTbs, am, bw, eo, msgr,
16964 cols#80, it#8, lines#24,
16965 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16966 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16967 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16968 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16970 # Apple //e with 80-column card, entry from BRL
16971 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16972 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16973 # Auto-wrap does not work right due to newline scrolling delay, which also
16974 # requires that you set "stty cr2".
16975 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16976 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16977 # using a terminal emulation program instead of the built-in firmware.
16981 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16982 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16983 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16984 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16986 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16987 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16988 apple2e-p|Apple //e via Pascal,
16989 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16990 kcud1=^J, use=apple2e,
16991 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16992 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16993 apple-ae|ASCII Express,
16994 OTbs, am, bw, msgr, nxon, xon,
16995 cols#80, it#8, lines#24,
16996 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16997 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16998 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16999 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
17001 appleII|apple ii plus,
17003 cols#80, it#8, lines#24,
17004 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
17005 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
17006 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
17007 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
17009 # Originally by Gary Ford 21NOV83
17010 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
17011 apple-80|apple II with smarterm 80 col,
17014 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
17015 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
17016 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
17017 apple-soroc|apple emulating soroc 120,
17020 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17021 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
17022 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17023 # From Peter Harrison, Computer Graphics Lab, San Francisco
17024 # ucbvax!ucsfmis!harrison .....uucp
17025 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
17026 # "These two work. If you don't have the inverse video chip for the
17027 # Apple with videx then remove the :so: and :se: fields."
17028 # (apple-videx: this used to be called DaleApple -- esr)
17029 apple-videx|Apple with videx videoterm 80 column board with inverse video,
17031 cols#80, it#8, lines#24,
17032 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
17033 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17034 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
17035 rmso=^Z2, sgr0=^Z2, smso=^Z3,
17036 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
17037 # Apple Cat ][ 212 modem, + more all
17038 # controlled by ASCII Express: Pro.
17039 # From Dave Shaver <isucs1!shaver>
17040 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
17043 acsc=, clear=^L, cuf1=^\,
17044 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17045 flash=^W35^W06, home=^Y,
17046 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
17048 apple-uterm|Ultraterm for Apple micros,
17051 acsc=, clear=^L, cuf1=^\,
17052 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17053 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17054 # from trwrba!bwong (Bradley W. Wong):
17056 # This entry assumes that you are using an apple with the UCSD Pascal
17057 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17058 # supplied with the standard apple except that screenwidth should be set
17059 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17060 # this termcap entry. This is because that key, on the Apple, transmits
17061 # a ^U and would thus preempt the more useful "up" function of vi.
17064 apple80p|80-column apple with Pascal card,
17067 clear=^Y^L, cuf1=^\\:,
17068 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17071 # Apple II+ equipped with Videx 80 column card
17073 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17074 # manually converted by D A Gwyn
17076 # DO NOT use any terminal emulation with this data base, it works directly
17077 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17079 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17080 # 1 screen, while in R2 ^U doesn't.
17081 # For inverse alternate character set add:
17082 # <smacs>=^O:<rmacs>=^N:
17083 # (apple-v: added it#8 -- esr)
17084 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17086 cols#80, it#8, lines#24,
17087 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17088 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17089 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17090 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17091 khome=^Y, rmso=^Z2, smso=^Z3,
17092 apple-videx3|vapple|Apple II with 80 col card,
17095 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17096 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17097 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17098 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17099 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17100 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17101 aepro|Apple II+ running ASCII Express Pro--vt52,
17104 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17105 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17107 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17108 apple-vm80|ap-vm80|apple with viewmax-80,
17111 clear=\014$<300/>, cuf1=^\\:,
17112 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17113 ed=\013$<300/>, el=^], home=\031$<200/>,
17115 #### Apple Lisa & Macintosh
17118 # (lisa: changed <cvvis> to <cnorm> -- esr)
17119 lisa|apple lisa console display (black on white),
17120 OTbs, am, eo, msgr,
17121 cols#88, it#8, lines#32,
17122 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17123 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17124 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17125 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17126 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17127 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17128 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17129 liswb|apple lisa console display (white on black),
17130 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17131 smso=\E[m, smul=\E[4m, use=lisa,
17133 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17134 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17136 # These entries assume that the 'Auto Wraparound' is enabled.
17137 # Xon-Xoff flow control should also be enabled.
17139 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17140 # settings are in non-volatile memory and don't need to be reset upon login.
17141 # Also setting the number of columns glitches the screen annoyingly.
17142 # You can type "reset" to get them set.
17144 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17145 OTbs, OTpt, am, xenl, xon,
17146 OTkn#4, cols#80, it#8, lines#24, vt#3,
17147 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17148 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17149 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17150 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17151 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17152 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17153 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17154 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17155 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17156 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17158 # Lisaterm in 132 column ("wide") mode.
17159 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17161 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17162 # Although MacTerminal has insert/delete line, it is commented out here
17163 # since it is much faster and cleaner to use the "lock scrolling region"
17164 # method of inserting and deleting lines due to the MacTerminal implementation.
17165 # Also, the "Insert/delete ch" strings have an extra character appended to them
17166 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17167 # supported by MacTerminal.
17168 mac|macintosh|Macintosh with MacTerminal,
17171 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17172 # Lisaterm in 132 column ("wide") mode.
17173 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17176 # nsterm*|Apple_Terminal - AppKit Terminal.app
17178 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
17179 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
17180 # Server and Mac OS X operating systems. There is also a
17181 # "terminal.app" in GNUStep, but I believe it to be an unrelated
17182 # codebase and I have not attempted to describe it here.
17184 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
17185 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
17186 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
17187 # version supports color.
17189 # To determine the version of Terminal.app you're using by running:
17191 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
17193 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
17195 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
17197 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
17199 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
17201 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
17203 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
17204 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
17205 # might work too, but really you're on your own here since these
17206 # systems are very obsolete and I can't test them. I do welcome
17207 # patches, though :).
17211 # For GNUstep_Terminal, you're probably best off using "linux" or
17212 # writing your own terminfo.
17214 # For MacTelnet, you're on your own. It's a different codebase, and
17215 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
17217 # For iTerm.app, see "iterm".
17220 # The AppKit Terminal.app descriptions all have names beginning with
17221 # "nsterm". Note that the statusline (-s) versions use the window
17222 # titlebar as a phony status line, and may produce warnings during
17223 # compilation as a result ("tsl uses 0 parameters, expected 1".)
17224 # Ignore these warnings, or even ignore these entries entirely. Apps
17225 # which need to position the cursor or do other fancy stuff inside the
17226 # status line won't work with these entries. They're primarily useful
17227 # for programs like Pine which provide simple notifications in the
17228 # status line. Please note that non-ASCII characters don't work right
17229 # in the status line, since Terminal.app incorrectly interprets their
17230 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
17231 # versions) or only accepts status lines consisting entirely of
17232 # characters from the first 256 Unicode positions (including C1 but
17235 # The Mythology* of AppKit Terminal.app:
17237 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
17238 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
17239 # shareware replacement for Terminal called "Stuart" which NeXT bought
17240 # and used as the basis for the Terminal.app in NeXTstep 2+,
17241 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
17242 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
17243 # capabilities for the early versions, but I believe that the
17244 # TERM_PROGRAM_VERSION may have been reset at some point.
17246 # The early versions were tailored to the NeXT character set. Sometime
17247 # after the Apple aquisition the encoding was swiched to MacRoman
17248 # (initally with serious altcharset bugs due to incomplete conversion
17249 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
17250 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
17251 # 8-color support (initially buggy when combined with attributes, but
17252 # that was later fixed.) More recently, around Mac OS X version 10.3
17253 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
17254 # some versions (for instance 133-1 which shipped with Mac OS X
17255 # version 10.4) this suffered from the <bce> bug, but that seems to
17256 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
17258 # In the early days of Mac OS X the terminal was fairly buggy and
17259 # would routinely crash under load. Many of these bugs seem to have
17260 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
17261 # some may still remain. This change seems to correspond to
17262 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
17263 # it did previously.
17265 # * This may correspond with what actually happened, but I don't
17266 # know. It is based on guesswork, hearsay, private correspondence,
17267 # my faulty memory, and the following online sources and references:
17269 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
17270 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
17272 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
17273 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
17275 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
17276 # "nsterm" to comply with the name length and case conventions and
17277 # limitations of various software packages [notably Solaris terminfo
17278 # and UNIX.] A single Apple_Terminal alias is retained for
17279 # backwards-compatbility.
17281 # * Added function key support (F1-F4). These only work in Terminal.app
17282 # version 51, hopefully the capabilities won't cause problems for people
17283 # using version 41.
17285 # * Added "full color" (-c) entries which support the 16-color mode in
17288 # * By default, version 51 uses UTF-8 encoding with broken altcharset
17289 # support, so "ASCII" (-7) entries without altcharset support were
17292 # nsterm - AppKit Terminal.app
17294 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
17295 # Terminal.app. It is a partial VT100 emulation with some xterm-like
17296 # extensions. This terminfo was written to describe versions 41
17297 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
17298 # version 10.1) of Terminal.app.
17300 # Terminal.app runs under the Mac OS X Quartz windowing system (and
17301 # other AppKit-supported windowing systems.) On the Mac OS X machine I
17302 # use, the executable for Terminal.app is:
17303 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
17305 # If you're looking for a description of the full-screen system
17306 # console which runs under Apple's Darwin operating system on PowerPC
17307 # platforms, see the "xnuppc" entry instead.
17309 # There were no function keys in version 41. In version 51, there are
17310 # four working function keys (F1, F2, F3 and F4.) The function keys
17311 # are included in all of these entries.
17313 # It does not support mouse pointer position reporting. Under some
17314 # circumstances the cursor can be positioned using option-click; this
17315 # works by comparing the cursor position and the selected position,
17316 # and simulating enough cursor-key presses to move the cursor to the
17317 # selected position. This technique fails in all but the simplest
17320 # It provides partial ANSI color support (background colors interacted
17321 # badly with bold in version 41, though, as reflected in :ncv:.) The
17322 # monochrome (-m) entries are useful if you've disabled color support
17323 # or use a monochrome monitor. The full color (-c) entries are useful
17324 # in version 51, which doesn't exhibit the background color bug. They
17325 # also enable an xterm-compatible 16-color mode.
17327 # The configurable titlebar is set using xterm-compatible sequences;
17328 # it is used as a status bar in the statusline (-s) entries. Its width
17329 # depends on font sizes and window sizes, but 50 characters seems to
17330 # be the default for an 80x24 window.
17332 # The MacRoman character encoding is used for some of the alternate
17333 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
17334 # disable alternate character set support entirely, and the "VT100"
17335 # (-acs) entries rely instead on Terminal.app's own buggy VT100
17336 # graphics emulation, which seems to think the character encoding is
17337 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
17338 # are useful in Terminal.app version 51, which supports UTF-8 and
17339 # other ASCII-compatible character encodings but does not correctly
17340 # implement VT100 graphics; once VT100 graphics are correctly
17341 # implemented in Terminal.app, the "VT100" (-acs) entries should be
17342 # usable in any ASCII-compatible character encoding [except perhaps
17343 # in UTF-8, where some experts argue for disallowing alternate
17344 # characters entirely.]
17346 # Terminal.app reports "vt100" as the terminal type, but exports
17347 # several environment variables which may aid detection in a shell
17348 # profile (i.e. .profile or .login):
17351 # TERM_PROGRAM=Apple_Terminal
17352 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
17353 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
17355 # For example, the following Bourne shell script would detect the
17356 # correct terminal type:
17358 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
17361 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
17363 # TERM="nsterm-old"
17365 # TERM="nsterm-c-7"
17369 # In a C shell derivative, this would be accomplished by:
17371 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
17372 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
17373 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
17374 # setenv TERM "nsterm-old"
17376 # setenv TERM "nsterm-c-7"
17381 # The '+' entries are building blocks
17382 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
17383 am, bw, msgr, xenl, xon,
17384 cols#80, it#8, lines#24,
17385 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
17386 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17387 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17388 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17389 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
17390 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
17391 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
17392 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
17393 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17394 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17395 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
17396 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17397 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
17399 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
17400 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17401 enacs=\E(B\E)0, rmacs=^O,
17402 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17403 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17405 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
17406 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
17407 enacs=\E(B\E)0, rmacs=^O,
17408 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17409 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17411 # compare with xterm+sl-twm
17412 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
17415 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
17417 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
17418 op=\E[0m, use=ibm+16color,
17420 nsterm+c41|AppKit Terminal.app v41 color support,
17421 colors#8, ncv#37, pairs#64,
17422 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17424 # These are different combinations of the building blocks
17426 # ASCII charset (-7)
17427 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
17430 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
17431 use=nsterm+s, use=nsterm+7,
17433 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
17434 use=nsterm+c41, use=nsterm+7,
17436 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
17437 use=nsterm+c, use=nsterm+7,
17439 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
17440 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
17442 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
17443 use=nsterm+s, use=nsterm+c, use=nsterm+7,
17445 # VT100 alternate-charset (-acs)
17446 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
17449 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
17450 use=nsterm+s, use=nsterm+acs,
17452 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
17453 use=nsterm+c41, use=nsterm+acs,
17455 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
17456 use=nsterm+c, use=nsterm+acs,
17458 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
17459 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
17461 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
17462 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
17465 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
17468 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
17469 use=nsterm+s, use=nsterm+mac,
17471 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
17472 use=nsterm+c41, use=nsterm+mac,
17474 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
17475 use=nsterm+c, use=nsterm+mac,
17477 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
17478 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
17480 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
17481 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
17483 # In Mac OS X version 10.5 the format of the preferences has changed
17484 # and a new, more complex technique is needed, e.g.,
17486 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
17487 # "NSUserDefaults");ud=NSUserDefaults.alloc();
17488 # ud.init();prefs=ud.persistentDomainForName_(
17489 # "com.apple.Terminal");prefs["Window Settings"][
17490 # prefs["Default Window Settings"]]["TerminalType"
17491 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
17492 # "com.apple.Terminal")' nsterm-16color
17494 # and it is still not settable from the preferences dialog. This is
17495 # tracked under rdar://problem/7365108 and rdar://problem/7365134
17496 # in Apple's bug reporter.
17498 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
17499 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
17500 # vt52, vt100, vt102 and xterm.
17501 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
17503 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
17504 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
17505 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
17506 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17507 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17508 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
17509 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
17510 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
17511 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
17512 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
17514 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
17515 # the background color erase feature. The newer version 240.2 in Mac OS X
17516 # version 10.5 does not.
17518 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
17519 # and D P Schreber comparing to nsterm-c-s-acs.
17521 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
17522 # can be set in Terminal.app, e.g.,
17524 # defaults write com.apple.Terminal TermCapString nsterm-bce
17526 # and that it is not set in Terminal's preferences dialog.
17528 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
17531 # * The terminal description matches the default settings.
17532 # * The keyboard is configurable via a dialog.
17533 # * By default khome, kend, knext and kprev are honored only with a
17535 # * There are bindings for control left/right arrow (but not up/down).
17536 # Added those to nsterm-16color, which is the version used for OS X 10.6
17537 # * "Allow VT100 application keypage mode" is by default disabled.
17538 # There is no way to press keypad-comma unless application mode is enabled
17540 # * 132-column mode stopped working during vttest's tests. Consider it broken.
17541 # * CHT, REP, SU, SD are buggy.
17542 # * ECH works (also in Leopard), but is not used here for compatibility.
17543 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
17544 # xterm-256color. However, it adds "nsterm", so it is possible to use the
17545 # nsterm entry from this file to override the MacPorts (20110404) or
17546 # system (20081102) copy of this file.
17547 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
17548 bce, use=nsterm-16color,
17550 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
17551 # TERM_PROGRAM_VERSION=309
17552 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
17553 # TERM_PROGRAM_VERSION=303
17554 nsterm-256color|Terminal.app in OS X 10.8,
17556 initc@, use=xterm+256color, use=nsterm-bce,
17558 # This is an alias which should always point to the "current" version
17559 nsterm|Apple_Terminal|AppKit Terminal.app,
17560 use=nsterm-256color,
17562 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
17563 # more featureful) terminal emulator for Mac OS X. It is similar
17564 # enough in capabilities to nsterm-16color that I have derived this
17565 # description from that one, but as far as I know they share no code.
17566 # Many of the features are user-configurable, but I attempt only to
17567 # describe the default configuration.
17569 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
17571 iTerm.app|iTerm.app terminal emulator for Mac OS X,
17573 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17574 use=nsterm-16color,
17576 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
17578 # On PowerPC platforms, Apple's Darwin operating system uses a
17579 # full-screen system console derived from a NetBSD framebuffer
17580 # console. It is an ANSI-style terminal, and is not really VT-100
17583 # Under Mac OS X, this is the system console driver used while in
17584 # single-user mode [reachable by holding down Command-S during the
17585 # boot process] and when logged in using console mode [reachable by
17586 # typing ">console" at the graphical login prompt.]
17588 # If you're looking for a description of the Terminal.app terminal
17589 # emulator which runs under the Mac OS X Quartz windowing system (and
17590 # other AppKit-supported windowing systems,) see the "nsterm"
17593 # NOTE: Under Mac OS X version 10.1, the default login window does not
17594 # prompt for user name, instead requiring an icon to be selected from
17595 # a list of known users. Since the special ">console" login is not in
17596 # this list, you must make one of two changes in the Login Window
17597 # panel of the Login section of System Prefs to make the special
17598 # ">console" login accessible. The first option is to enable 'Show
17599 # "Other User" in list for network users', which will add a special
17600 # "Other..." icon to the graphical login panel. Selecting "Other..."
17601 # will present the regular graphical login prompt. The second option
17602 # is to change the 'Display Login Window as:' setting to 'Name and
17603 # password entry fields', which replaces the login panel with a
17604 # graphical login prompt.
17606 # There are no function keys, at least not in Darwin 1.3.
17608 # It has no mouse support.
17610 # It has full ANSI color support, and color combines correctly with
17611 # all three supported attributes: bold, inverse-video and underline.
17612 # However, bold colored text is almost unreadable (bolding is
17613 # accomplished using shifting and or-ing, and looks smeared) so bold
17614 # has been excluded from the list of color-compatible attributes
17615 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17616 # monochrome monitor.
17618 # There is one serious bug with this terminal emulation's color
17619 # support: repositioning the cursor onto a cell with non-matching
17620 # colors obliterates that cell's contents, replacing it with a blank
17621 # and displaying a colored cursor in the "current" colors. There is
17622 # no complete workaround at present [other than using the monochrome
17623 # (-m) entries,] but removing the (msgr) capability seemed to help.
17625 # The "standout" chosen was simple reverse-video, although a colorful
17626 # standout might be more aesthetically pleasing. Similarly, the bold
17627 # chosen is the terminal's own smeared bold, although a simple
17628 # color-change might be more readable. The color-bold (-b) entries
17629 # uses magenta colored text for bolding instead. The fancy color (-f
17630 # and -f2) entries use color for bold, standout and underlined text
17631 # (underlined text is still underlined, though.)
17633 # Apparently the terminal emulator does support a VT-100-style
17634 # alternate character set, but all the alternate character set
17635 # positions have been left blank in the font. For this reason, no
17636 # alternate character set capabilities have been included in this
17637 # description. The console driver appears to be ASCII-only, so (enacs)
17638 # has been excluded [although the VT-100 sequence does work.]
17640 # The default Mac OS X and Darwin installation reports "vt100" as the
17641 # terminal type, and exports no helpful environment variables. To fix
17642 # this, change the "console" entry in /etc/ttys from "vt100" to
17643 # "xnuppc-WxH", where W and H are the character dimensions of your
17644 # console (see below.)
17646 # The font used by the terminal emulator is apparently one originally
17647 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
17648 # file includes descriptions for the following geometries:
17650 # Pixels Characters Entry Name (append -m for monochrome)
17651 # -------------------------------------------------------------------
17652 # 640x400 80x25 xnuppc-80x25
17653 # 640x480 80x30 xnuppc-80x30
17654 # 720x480 90x30 xnuppc-90x30
17655 # 800x600 100x37 xnuppc-100x37
17656 # 896x600 112x37 xnuppc-112x37
17657 # 1024x640 128x40 xnuppc-128x40
17658 # 1024x768 128x48 xnuppc-128x48
17659 # 1152x768 144x48 xnuppc-144x48
17660 # 1280x1024 160x64 xnuppc-160x64
17661 # 1600x1024 200x64 xnuppc-200x64
17662 # 1600x1200 200x75 xnuppc-200x75
17663 # 2048x1536 256x96 xnuppc-256x96
17665 # The basic "xnuppc" entry includes no size information, and the
17666 # emulator includes no reporting capability, so you'll be at the mercy
17667 # of the TTY device (which reports incorrectly on my hardware.) The
17668 # color-bold entries do not include size information.
17670 # The '+' entries are building blocks
17671 xnuppc+basic|Darwin PowerPC Console basic capabilities,
17672 am, bce, mir, xenl,
17674 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17675 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17676 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17677 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
17678 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
17679 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17680 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
17681 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17683 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17684 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17685 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17687 xnuppc+c|Darwin PowerPC Console ANSI color support,
17688 colors#8, ncv#32, pairs#64,
17689 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17691 xnuppc+b|Darwin PowerPC Console color-bold support,
17694 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17697 xnuppc+f|Darwin PowerPC Console fancy color support,
17699 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
17700 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17702 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
17705 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
17706 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17708 # Building blocks for specific screen sizes
17709 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
17712 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
17715 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
17718 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
17719 cols#100, lines#37,
17721 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
17722 cols#112, lines#37,
17724 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
17725 cols#128, lines#40,
17727 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
17728 cols#128, lines#48,
17730 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
17731 cols#144, lines#48,
17733 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
17734 cols#160, lines#64,
17736 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
17737 cols#200, lines#64,
17739 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
17740 cols#200, lines#75,
17742 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
17743 cols#256, lines#96,
17745 # These are different combinations of the building blocks
17747 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
17750 xnuppc|darwin|Darwin PowerPC Console (color),
17751 use=xnuppc+c, use=xnuppc+basic,
17753 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
17756 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
17757 use=xnuppc+b, use=xnuppc+c,
17759 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
17762 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
17763 use=xnuppc+f, use=xnuppc+c,
17765 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
17768 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
17769 use=xnuppc+f2, use=xnuppc+c,
17771 # Combinations for specific screen sizes
17772 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
17773 use=xnuppc+80x25, use=xnuppc+basic,
17775 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
17776 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17778 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
17779 use=xnuppc+80x30, use=xnuppc+basic,
17781 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
17782 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17784 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
17785 use=xnuppc+90x30, use=xnuppc+basic,
17787 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
17788 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17790 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
17791 use=xnuppc+100x37, use=xnuppc+basic,
17793 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
17794 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17796 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
17797 use=xnuppc+112x37, use=xnuppc+basic,
17799 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
17800 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17802 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
17803 use=xnuppc+128x40, use=xnuppc+basic,
17805 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
17806 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17808 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
17809 use=xnuppc+128x48, use=xnuppc+basic,
17811 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
17812 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17814 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
17815 use=xnuppc+144x48, use=xnuppc+basic,
17817 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17818 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17820 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17821 use=xnuppc+160x64, use=xnuppc+basic,
17823 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17824 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17826 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17827 use=xnuppc+200x64, use=xnuppc+basic,
17829 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17830 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17832 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17833 use=xnuppc+200x75, use=xnuppc+basic,
17835 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17836 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17838 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17839 use=xnuppc+256x96, use=xnuppc+basic,
17841 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17842 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17844 #### Radio Shack/Tandy
17847 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17848 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17849 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17850 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17852 cols#80, it#8, lines#24,
17853 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17854 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17855 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17856 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17857 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17858 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17859 # (trs2: removed obsolete ":nl=^_:" -- esr)
17860 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17862 cols#80, it#8, lines#24,
17863 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17864 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17865 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17866 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17867 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17868 # (This had extension capabilities
17869 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17870 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17871 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17872 trs16|trs-80 model 16 console,
17874 cols#80, it#8, lines#24,
17875 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17876 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17877 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17878 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17879 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17880 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17881 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17882 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17883 smacs=\ERG, smso=\ERD,
17885 #### Commodore Business Machines
17887 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17888 # after years of shaky engineering and egregious mismanagement. Made one
17889 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17890 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17891 # ever (most units sold); they can still be found gathering dust in closets
17895 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17896 # Added a few more entries, converted caret-type control sequence (^x) entries
17897 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17898 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17900 # :as:, :ae: Support for alternate character sets.
17901 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17902 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17903 # This one appears to fix a problem I always had with a line ending
17904 # at 'width+1' (I think) followed by a blank line in vi. The blank
17905 # line tended to disappear and reappear depending on how the screen
17906 # was refreshed. Note that this is probably needed only if you use
17907 # something like a Dnet Fterm with the window sized to some peculiar
17908 # dimension larger than 80 columns.
17909 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17910 # (amiga: removed obsolete :kn#10:,
17911 # also added empty <acsc> to suppress a warning --esr)
17913 OTbs, am, bw, xenl,
17915 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17916 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17917 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17918 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17919 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17920 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17921 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17922 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17923 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17924 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17925 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17926 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17927 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17929 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17930 # (amiga: added empty <acsc> to suppress a warning.
17931 # I'm told this entry screws up badly with AS225, the Amiga
17932 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17933 amiga-h|Hans Verkuil's Amiga ANSI,
17936 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17937 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17938 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17939 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17940 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17941 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17942 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17943 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17944 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17945 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17946 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17947 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17948 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17949 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17950 smso=\2337m, smul=\2334m,
17952 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17954 # Pavel Fedin added
17959 amiga-8bit|Amiga ANSI using 8-bit controls,
17960 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17961 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17962 kpp=\233T, ri=\215, rin@, use=amiga-h,
17964 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17965 # requires use of appropriate preferences settings.
17966 amiga-vnc|Amiga using VNC console (black on light gray),
17967 am, da, db, msgr, ndscr,
17968 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17969 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17970 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17971 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17972 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17973 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17974 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17975 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17976 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17977 indn=\E[%p1%dS, invis=\E8m,
17978 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17979 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17980 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17981 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17982 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17983 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17984 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17985 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17986 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17987 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17988 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17989 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17990 smso=\E[1m, smul=\E[4m,
17992 # MorphOS on Genesi Pegasos
17993 # By Pavel Fedin <sonic_amiga@rambler.ru>
17995 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17996 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17997 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17998 ri=\215, rin@, use=amiga-h,
18000 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
18001 # I'm trying to write a termcap for a commodore b-128, and I'm
18002 # having a little trouble. I've had to map most of my control characters
18003 # to something that unix will accept (my delete-char is a ctrl-t, etc),
18004 # and create some functions (like cm), but thats life.
18005 # The problem is with the arrow keys - right, and up work fine, but
18006 # left deletes the previous character and down I just can't figure out.
18007 # Jove knows what I want, but I don't know what it's sending to me (it
18008 # isn't thats bound to next-line in jove).
18009 # Anybody got any ideas? Here's my termcap.
18010 # DAG -- I changed his "^n" entries to "\n"; see if that works.
18012 commodore|b-128|Commodore B-128 micro,
18014 OTdN#20, cols#80, lines#24, pb#150,
18015 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
18016 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
18017 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
18018 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
18019 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
18024 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
18025 northstar|North Star Advantage,
18029 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
18030 el=\016$<200/>, home=\034\032$<200/>,
18034 # Thu Jul 7 03:55:16 1983
18036 # As an aside, be careful; it may sound like an anomaly on the
18037 # Osborne, but with the 80-column upgrade, it's too easy to
18038 # enter lines >80 columns!
18040 # I've already had several comments...
18041 # The Osborne-1 with the 80-col option is capable of being
18042 # 52, 80, or 104 characters wide; default to 80 for compatibility
18043 # with most systems.
18045 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18046 osborne-w|osborne1-w|osborne I in 104-column mode,
18048 cols#104, lines#24,
18049 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18050 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18051 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18052 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18053 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18054 osborne|osborne1|osborne I in 80-column mode,
18055 OTbs, am, mir, msgr, ul, xhp,
18056 OTdB#4, cols#80, lines#24,
18057 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18058 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18059 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18060 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18061 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18063 # Osborne Executive definition from BRL
18064 # Similar to tvi920
18065 # Added by David Milligan and Tom Smith (SMU)
18066 osexec|Osborne executive,
18068 OTug#1, cols#80, lines#24, xmc#1,
18069 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18071 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18072 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18073 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18074 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18075 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18078 #### Console types for obsolete UNIX clones
18080 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18081 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18082 # were commercial, Minix an educational tool sold in conjunction with a book.
18083 # Memory-segmentation limits and a strong tendency to look like V7 long after
18084 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18085 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18086 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18087 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18088 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18089 # even as single processes under SunOS and the Macintosh OS.
18093 # http://www.minix3.org/manpages/man4/console.4.html
18094 minix|minix console (v3),
18095 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18096 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18097 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18098 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18099 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18100 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18101 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18102 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18103 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18104 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18105 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18106 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18107 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18108 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18111 minix-3.0|minix console (v3.0),
18112 use=ecma+color, use=minix-1.7,
18115 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18116 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18117 minix-1.7|minix console (v1.7),
18119 cols#80, it#8, lines#25,
18120 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18121 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18122 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18123 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18124 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18125 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18126 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18127 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18128 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18129 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18130 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18131 smso=\E[7m, smul=\E[4m,
18132 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18133 minix-old|minix-1.5|minix console (v1.5),
18135 cols#80, it#8, lines#25,
18136 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18137 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18138 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18139 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18140 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18141 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18142 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18143 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18144 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18145 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18146 # The linewrap option can be specified by editing /usr/include/minix/config.h
18147 # before recompiling the minix 1.5 kernel.
18148 minix-old-am|minix console with linewrap,
18151 pc-minix|minix console on an Intel box,
18152 use=klone+acs, use=minix-3.0,
18154 # According to the Coherent 2.3 manual, the PC console is similar
18155 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18156 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18157 # has blinking and bold.
18158 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18160 cols#80, it#8, lines#25,
18161 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18162 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18163 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18164 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18165 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18167 # According to the Venix 1.1 manual, the PC console is similar
18168 # to a DEC vt52. Differences seem to be (1) arrow keys send
18169 # different strings, (2) enhanced standout, (3) added insert/delete line.
18170 # Note in particular that it doesn't have automatic margins.
18171 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18172 # not described here because this derives from an old termcap entry.
18173 pc-venix|venix|IBM PC console running Venix,
18174 cols#80, it#8, lines#25,
18175 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18176 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18177 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18178 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18180 #### Miscellaneous microcomputer consoles
18182 # If you know anything more about any of these, please tell me.
18185 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18186 # It may be used as a terminal by putting it in "line" mode as seen on
18187 # one of the status lines.
18188 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18189 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18190 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18191 # used \ED instead.
18192 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18193 mai|basic4|MAI Basic Four in ansi mode,
18194 am, da, db, mir, msgr,
18195 cols#82, it#8, lines#25,
18196 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18197 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18198 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18199 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18200 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18201 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18202 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18203 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18204 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18205 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18206 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18207 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18208 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18210 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18211 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18212 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18213 # about 1,5 km from where I live, but doesn't build own computers any
18214 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18215 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18216 # video output for a TV set or a dedicated monitor and several slots for
18217 # Apple II cards. Basis 108 were quite popular at german schools before
18218 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18219 # development system (which I used even in 1993 to program the steering
18220 # and data recording for our school's experimental solar panel :), Apple DOS
18222 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18223 basis|BASIS108 computer with terminal translation table active,
18224 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18225 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18226 smso=\E(, use=adm3a,
18227 # luna's BMC terminal emulator
18228 luna|luna68k|LUNA68K Bitmap console,
18229 cols#88, lines#46, use=ansi-mini,
18230 megatek|pegasus workstation terminal emulator,
18233 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18234 # interface (pre-Macintosh by several years) that went nowhere.
18235 xerox820|x820|Xerox 820,
18238 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18239 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18242 #### Videotex and teletext
18245 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18246 # \E[?3l 80 columns
18247 # \E[?4l scrolling on
18248 # \E[12h local echo off
18249 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18250 # \E)0 G1 DEC set (line graphics)
18252 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18253 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18254 OTbs, eslok, hs, xenl,
18255 cols#80, it#8, lines#24, wsl#72, xmc#0,
18256 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18257 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18258 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18259 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18260 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18261 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18262 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18263 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18264 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18265 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18266 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18267 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18268 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18269 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18270 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18271 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18272 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18273 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18274 u6=\E[%i%d;%dR, u7=\E[6n,
18276 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18278 minitel1|minitel 1,
18279 am, bw, eslok, hs, hz, msgr,
18280 colors#8, cols#40, lines#24, pairs#8,
18281 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18282 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18283 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18284 enacs=^Y, fsl=^J, home=^^, ind=^J,
18285 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18286 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18287 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18288 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18289 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18290 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18291 minitel1b|minitel 1-bistandard (in 40cols mode),
18293 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18294 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18295 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18296 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18297 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18298 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18299 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18300 # <rmkx> posait des problemes (logout en sortant de vi).
18301 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18303 colors@, cols#80, it#8, pairs@,
18304 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18305 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18306 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18307 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18308 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18309 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18310 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18311 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18312 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18314 ######## OBSOLETE VDT TYPES
18316 # These terminals are *long* dead -- these entries are retained for
18317 # historical interest only.
18319 #### Amtek Business Machines
18322 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18323 # but these caps were commented out in 8.3; also, removed overridden
18324 # ":do=^J:" -- esr)
18325 abm80|amtek business machines 80,
18328 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18329 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18330 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18332 #### Bell Labs blit terminals
18334 # These were AT&T's official entries. The 5620 FAQ maintained by
18335 # David Breneman <daveb@dgtl.com> has this to say:
18337 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18338 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18339 # was good. But lo, upon the horizon loomed a mighty management-type person
18340 # (known now only by the initials VP) who said, the mighty Jerq must stay
18341 # alone, and could not go forth into the world. So Locanthi and Pike put the
18342 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18343 # world. And the Jerq lived the rest of its days in research, but never
18344 # strayed from those paths.
18346 # In all seriousness, the Blit was originally known as the Jerq, but when
18347 # it started to be shown outside of the halls of the Bell Labs Research
18348 # organization, the management powers that be decided that the name could
18349 # not remain. So it was renamed to be Blit. This was in late 1981.
18351 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18355 blit|jerq|blit running teletype rom,
18357 cols#87, it#8, lines#72,
18358 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18359 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18360 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18361 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18362 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18363 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18365 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18366 cbblit|fixterm|blit running columbus code,
18368 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18369 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18370 smul=\EU", use=blit,
18372 oblit|ojerq|first version of blit rom,
18373 am, da, db, eo, mir, ul, xon,
18374 cols#88, it#8, lines#72,
18375 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18376 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18377 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18378 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18381 #### Bolt, Beranek & Newman (bbn)
18383 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18384 # The parent company, best known as the architects of the Internet, is
18387 # Jeff DelPapa <dp@world.std.com> writes:
18388 # The bitgraph was a large white box that contained a monochrome bitmap
18389 # display, and a 68000 to run it. You could download code and run it on
18390 # the cpu, it had 128kb (I think) of memory. I used one in the late
18391 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18392 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18393 # rate, and looked like a rubber sheet stretching, then snapping
18394 # upwards. It had everything the early mac had, except a floppy drive a
18395 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18396 # Beranek and Neuman) sold at most a few hundred of them to the real
18397 # world. DOD may have bought more...
18400 # Entries for the BitGraph terminals. The problem
18401 # with scrolling in vi can only be fixed by getting BBN to put
18402 # smarter scroll logic in the terminal or changing vi or padding
18403 # scrolls with about 500 ms delay.
18405 # I always thought the problem was related to the terminal
18406 # counting newlines in its input buffer before scrolling and
18407 # then moving the screen that much. Then vi comes along and
18408 # paints lines in on the bottom line of the screen, so you get
18409 # this big white gap.
18411 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18412 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18414 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18415 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18417 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18420 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18421 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18422 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18423 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18424 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18425 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18426 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18427 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18429 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18430 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18432 bg1.25nv|bbn bitgraph 1.25 (normal video),
18433 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18435 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18436 bg1.25|bbn bitgraph 1.25,
18438 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18439 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18440 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18441 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18442 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18443 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18444 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18447 #### Bull (bq, dku, vip)
18449 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18451 #============================================#
18452 # BULL QUESTAR 210 `SDP' terminals emulation #
18453 #============================================#
18455 # Description written by R.K.Saunders (Bull Transac)
18457 # Modifications written by F. Girard (Bull MTS)
18458 # 19-05-87 V02.00.01
18459 # 17-12-87 V02.00.02
18460 # 15-09-89 V02.00.05
18462 # Typical technical selections F1 (modes SDP/ROLL):
18463 # -------------------------------------------------------
18464 # | 01 02 03 04 05 06 07 08 09 10 |
18465 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18467 # | 11 12 13 14 15 16 17 18 19 20 |
18468 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18470 # | 21 22 23 24 25 26 27 28 29 30 |
18471 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18473 # | 31 32 33 34 35 36 37 38 39 40 |
18474 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18475 # -------------------------------------------------------
18476 # Typical firmware identification F5 "etat 6":
18477 # P287.02.04b (AZERTY)
18478 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18479 # P298.03.03 (monochrome) or P374.03.02 (colour)
18481 # SM SDP mode (VIP command): ^[[?=h
18482 # RIS (erases screen): ^[c
18483 # DMI disable keyboard: ^[`
18484 # SM double rendition mode: ^[[?>h
18485 # RM solicited status mode: ^[[5l
18486 # RM character mode: ^[[>l
18487 # RM echoplex mode: ^[[12l
18488 # RM column tab mode: ^[[18l
18489 # RM forbid SS2 keyboard mode: ^[[?<l
18490 # SM scroll mode: ^[[=h
18491 # FCF enable XON/XOFF: ^[P1s^[\
18492 # MTL select end msg character: ^[[^Wp
18493 # EMI enable keyboard: ^[b
18494 # RIS retour etat initial: ^[c
18495 # enable FC keypad: ^[[?<h,
18496 # MPW map status line window: ^[PY99:98^[\
18497 # SCP select status line: ^[[0;98v
18498 # ED erase entire partition: ^[[2J
18499 # SCP select main partition: ^[[v
18500 # SM character insertion mode: ^[[4h
18501 # RM character replacement mode: ^[[4l
18502 # COO cursor on: ^[[r
18503 # COO cursor off: ^[[1r
18504 # SGR dim (turquoise) rev attr: ^[[2;7m
18505 # SGR Data normal attr: ^[[m
18506 # SO Line-graphic mode ON: ^N
18507 # SI Line-graphic mode OFF: ^O
18508 # MC start routing to printer: ^[[5i
18509 # MC stop routing to printer: ^M^[[4i
18512 # This entry covers the following terminals:
18513 # dku7102, tws2102, and tws models 2105 to 2112
18514 tws-generic|dku7102|Bull Questar tws terminals,
18515 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18516 cols#80, it#8, lines#24, wsl#80,
18517 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18518 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18519 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18520 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18521 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18522 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18523 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18524 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18525 il1=\E[L, ind=^J, invis=\E[0;8m,
18526 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18527 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18528 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18529 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18530 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18531 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18532 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18533 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18534 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18535 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18536 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18537 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18538 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18539 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18540 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18541 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18542 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18544 tws2103|xdku|BULL Questar tws2103,
18545 ht=^I, use=tws-generic,
18546 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18547 ht=^I, use=tws2102-sna,
18548 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18549 clear=\E[2J\E[H, cup@, dl@, dl1@,
18550 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18551 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18553 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18554 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18555 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18556 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18558 #=========================================================#
18559 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18560 #=========================================================#
18562 # Description written by J. Staerck (BULL SA)
18563 # Copyright (c) 1989 BULL SA
18564 #---------------------------------------------------------------------------
18565 # This entry is used for terminals with vt320 emulation mode
18566 # and following set-up :
18567 # 8 bit ISO Latin Character Set (ISO 8859-1),
18568 # 7 bit Control Characters,
18569 # 80 columns screen.
18570 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18571 # They are used in string capabilities with vt220-320 emulation mode.
18572 # In the following DEC definitions, two kinds of terminfo databases are
18574 # 1. the first with Command Sequence Introducer starting with escape
18575 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18576 # 2. the second with Command Sequence Introducer starting with escape
18577 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18578 # Soft Terminal Reset esc [ ! p
18579 # RIS (erases screen): esc c
18580 # DECKPNM numeric keypad mode: esc >
18581 # DECKPAM applic. keypad mode: esc =
18582 # DECSTBM Scrolling region: esc [ r
18583 # SCS select G0 = US: esc ( B
18584 # SCS select G1 = line-graphic: esc ) 0
18585 # Select 7-bit C1 controls: esc sp F
18586 # Select 8-bit C1 controls: esc sp G
18587 # Select cursor home: esc [ H
18588 # Select erase screen: esc [ J
18589 # SM KAM lock keyboard: esc [ 2 h
18590 # RM KAM unlock keyboard: esc [ 2 l
18591 # SM SRM local echo off: esc [ 1 2 h
18592 # RM SRM local echo on: esc [ 1 2 l
18593 # SM LNM New line : esc [ 2 0 h
18594 # RM LNM return = CR only: esc [ 2 0 l
18595 # SM DECCKM cursor keys mode: esc [ ? 1 h
18596 # RM DECCKM appli. keys mode: esc [ ? 1 l
18597 # SM DECANM ANSI mode on: esc [ ? 2 h
18598 # RM DECANM ANSI mode off: esc [ ? 2 l
18599 # SM DECCOLM 132-column screen: esc [ ? 3 h
18600 # RM DECCOLM 80-column screen: esc [ ? 3 l
18601 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18602 # RM DECSCLM Jump scroll: esc [ ? 4 l
18603 # SM DECSCNM screen light backgr. esc [ ? 5 h
18604 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18605 # SM DECOM move within margins: esc [ ? 6 h
18606 # RM DECOM move outside margins: esc [ ? 6 l
18607 # SM DECAWM auto right margin: esc [ ? 7 h
18608 # RM DECAWM auto right margin: esc [ ? 7 l
18609 # SM DECARM auto repeat: esc [ ? 8 h
18610 # RM DECARM auto repeat: esc [ ? 8 l
18611 # DECSASD Select active main: esc [ 0 $ }
18612 # DECSASD Select active status: esc [ 1 $ }
18613 # DECSSDT Select status none: esc [ 0 $ ~
18614 # DECSSDT Select status indic.: esc [ 1 $ ~
18615 # DECSSDT Select status host-wr: esc [ 2 $ ~
18616 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18617 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18618 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18619 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18620 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18621 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18622 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18623 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18624 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18625 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18626 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18627 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18628 # Char. and Line attributes: esc [ Ps ... Ps m
18629 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18630 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18633 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18634 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18635 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
18636 cols#80, it#8, lines#24, vt#3, wsl#80,
18637 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18638 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18639 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18640 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18641 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18642 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18643 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18644 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18645 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18646 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18647 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18648 is1=\E[63;1"p\E[2h,
18649 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18650 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18651 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18652 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18653 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18654 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18655 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18656 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18657 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18658 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18659 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
18660 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18661 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
18663 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18664 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18665 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18666 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
18667 bq300-rv|Bull vt320 reverse 80 columns,
18668 flash=\E[?5l$<50>\E[?5h,
18669 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18671 bq300-w|Bull vt320 132 columns,
18673 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18674 rs2=\E[?3h, use=bq300,
18675 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18677 flash=\E[?5l$<50>\E[?5h,
18678 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18679 rs2=\E[?3h, use=bq300,
18681 # This entry is used for terminals with vt320 emulation mode
18682 # and following set-up :
18683 # 8 bit ISO Latin Character Set (ISO 8859-1),
18684 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18685 # 80 columns screen.
18686 # Soft Terminal Reset csi ! p
18687 # RIS (erases screen): esc c
18688 # DECKPNM numeric keypad mode: esc >
18689 # DECKPAM applic. keypad mode: esc =
18690 # DECSTBM Scrolling region: esc [ r
18691 # SCS select G0 = US: esc ( B
18692 # SCS select G1 = line-graphic: esc ) 0
18693 # Select 7-bit C1 controls: esc sp F
18694 # Select 8-bit C1 controls: esc sp G
18695 # Select cursor home: csi H
18696 # Select erase screen: csi J
18697 # SM KAM lock keyboard: csi 2 h
18698 # RM KAM unlock keyboard: csi 2 l
18699 # SM SRM local echo off: csi 1 2 h
18700 # RM SRM local echo on: csi 1 2 l
18701 # SM LNM New line : csi 2 0 h
18702 # RM LNM return = CR only: csi 2 0 l
18703 # SM DECCKM cursor keys mode: csi ? 1 h
18704 # RM DECCKM appli. keys mode: csi ? 1 l
18705 # SM DECANM ANSI mode on: csi ? 2 h
18706 # RM DECANM ANSI mode off: csi ? 2 l
18707 # SM DECCOLM 132-column screen: csi ? 3 h
18708 # RM DECCOLM 80-column screen: csi ? 3 l
18709 # SM DECSCLM Smooth scroll: csi ? 4 h
18710 # RM DECSCLM Jump scroll: csi ? 4 l
18711 # SM DECSCNM screen light backgr. csi ? 5 h
18712 # RM DECSCNM screen dark backgr. csi ? 5 l
18713 # SM DECOM move within margins: csi ? 6 h
18714 # RM DECOM move outside margins: csi ? 6 l
18715 # SM DECAWM auto right margin: csi ? 7 h
18716 # RM DECAWM auto right margin: csi ? 7 l
18717 # SM DECARM auto repeat: csi ? 8 h
18718 # RM DECARM auto repeat: csi ? 8 l
18719 # DECSASD Select active main: csi 0 $ }
18720 # DECSASD Select active status: csi 1 $ }
18721 # DECSSDT Select status none: csi 0 $ ~
18722 # DECSSDT Select status indic.: csi 1 $ ~
18723 # DECSSDT Select status host-wr: csi 2 $ ~
18724 # SM DECTCEM Visible cursor: csi ? 2 5 h
18725 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18726 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18727 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18728 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18729 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18730 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18731 # Char. and Line attributes: csi Ps ... Ps m
18732 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18733 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18734 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18735 bq300-8|Bull vt320 full 8 bits 80 columns,
18736 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18737 cols#80, it#8, lines#24, vt#3, wsl#80,
18738 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18739 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18740 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18741 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18742 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18743 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18744 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
18745 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18746 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18747 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18748 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
18749 ind=\ED, is1=\E[63;2"p\E[2h,
18750 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18751 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18752 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18753 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18754 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18755 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18756 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18757 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18758 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18759 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18760 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18761 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18762 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
18763 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
18764 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
18765 s0ds=\E(B, s1ds=\E(0, sc=\E7,
18766 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18767 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
18768 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18769 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18770 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18771 flash=\233?5l$<50>\233?5h,
18772 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18774 bq300-8w|Bull vt320 8-bit 132 columns,
18776 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18777 rs2=\233?3h, use=bq300-8,
18778 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18780 flash=\233?5l$<50>\233?5h,
18781 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18782 rs2=\233?3h, use=bq300-8,
18784 # This entry is used for terminals with vt320 emulation mode
18785 # a 102 keys keyboard (PC scancode !) and following set-up :
18786 # 8 bit ISO Latin Character Set (ISO 8859-1),
18787 # 7 bit Control Characters,
18788 # 80 columns screen.
18789 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18790 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18791 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18792 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18793 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18794 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18795 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18796 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18797 flash=\E[?5l$<50>\E[?5h,
18798 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18800 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18802 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18803 rs2=\E[?3h, use=bq300-pc,
18804 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18806 flash=\E[?5l$<50>\E[?5h,
18807 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18808 rs2=\E[?3h, use=bq300-pc,
18809 # 8 bit ISO Latin Character Set (ISO 8859-1),
18810 # 8 bit Control Characters,
18811 # 80 columns screen.
18812 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18813 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18814 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18815 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18816 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18817 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18818 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18819 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18820 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18821 flash=\E[?5l$<50>\E[?5h,
18822 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18824 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18826 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18827 rs2=\E[?3h, use=bq300-8-pc,
18828 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18830 flash=\E[?5l$<50>\E[?5h,
18831 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18832 rs2=\E[?3h, use=bq300-8-pc,
18834 #======================================================#
18835 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18836 #======================================================#
18838 # normal mode, 8 bits, 80 columns terminal.
18840 # RIS reset initial state: ^[c
18841 # BLE bell enable ^[h
18842 # BLD bell disable ^[g
18843 # CAMS char. attr. mode set ^[[D
18844 # CAMR char. attr. mode reset ^[[G
18846 # KBU keyboard unlock (set) ^[[W
18847 # KBL keyboard lock (reset) ^[[X
18848 # CM character mode (async.) ^[k
18849 # NEP non echoplex mode (by host) ^[l
18850 # EP echoplex mode (by host) ^[m
18851 # IM insert mode set ^[[I
18852 # IM insert mode reset ^[[J
18853 # RMS roll mode set ^[r
18854 # RMR roll mode reset ^[q
18855 # SM78 set mode vip7800 ^[[1q
18856 # SD scroll up (72 lines) ^[[0s
18857 # SD scroll down (72 lines) ^[[1s
18858 # RBM block mode reset ^[[E
18859 # SLS status line set ^[w
18860 # SLR status line reset ^[v
18861 # SLL status line lock ^[O
18862 # LGS Line-graphic mode set ^[G
18863 # LGR Line-graphic mode reset ^[F
18864 # TBC tab clear (at cursor pos.) ^[[g
18865 # TBI tab initialize ^[[N
18866 # TBS tab set (at cursor pos.) ^[p
18867 # PDS print data space ^[[0p
18868 # PHD print host data ^[[3p
18869 # PDT print data terminator ^[[<p
18870 # PRES print adapter reset ^[[2p
18871 # SSPR multi-part. reset ^[[<>u
18872 # SSP0 partition 0 set ^[[00u
18873 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18874 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18875 # SSP3 partition n format 3 ^[[PnPnu
18876 # ATR attribute (visual)
18879 # hide (blank) : ^[sH
18881 # inverse video : ^[sI
18886 # This covers the vip7800 and BQ3155-vip7800
18887 vip|Bull Questar 3155-7800,
18888 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18889 cols#80, it#8, lines#24, vt#3, wsl#80,
18890 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18891 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18892 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18893 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18894 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18895 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18896 is2=\E[00u\E[<>001001024080024080u\E[01u,
18897 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18898 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18899 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18900 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18901 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18902 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18903 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18904 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18905 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18906 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18907 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18908 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18909 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18910 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18911 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18912 smul=\Es_, tbc=\E[N, tsl=\Ew,
18913 # normal screen, 8 bits, 132 columns terminal.
18914 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18916 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18917 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18919 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18920 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18921 cols#132, lines#72, wsl#132,
18922 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18927 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18928 # that is smaller than the screen, and puts up a warning message
18929 # outside the window. Te erases the warning message, puts the
18930 # window back to be the whole screen, and puts the cursor at just
18931 # below the small window. I defined <cnorm> and <civis> to really turn
18932 # the cursor on and off, but I have taken this out since I don't
18933 # like the cursor being turned off when vi exits.
18934 cg7900|chromatics|chromatics 7900,
18937 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18938 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18939 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18940 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18941 rmso=\001C1\,\001c2\,,
18942 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18943 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18945 #### Computer Automation
18948 ca22851|computer automation 22851,
18951 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18952 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18953 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18958 # This entry has correct padding and the undocumented "ri" capability
18959 cyb83|xl83|cybernex xl-83,
18962 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18963 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18964 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18965 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18966 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18967 cyb110|mdl110|cybernex mdl-110,
18970 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18971 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18972 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18973 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18974 ht=\011$<43>, ich1=\016A\035$<3.5>,
18975 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18979 # Datapoint is gone. They used to be headquartered in Texas.
18980 # They created ARCnet, an Ethernet competitor that flourished for a while
18981 # in the early 1980s before 3COM got wise and cut its prices. The service
18982 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18985 dp3360|datapoint|datapoint 3360,
18988 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18989 ed=^_, el=^^, home=^], ind=^J,
18991 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18992 # The Datapoint 8242 Workstation was sold at least between 1985
18993 # and 1989. To make the terminal work with this entry, press
18994 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18995 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18996 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18997 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18998 # fact unusable because the strings sent by the terminal conflict
18999 # with other keys).
19000 # The terminal is capable of displaying "box draw" characters.
19001 # For each graphic character you must send 2 ESC's (\E\E) followed
19002 # by a control character as follows:
19003 # character meaning
19004 # ========= =======
19007 # ctrl-G bottom tee
19010 # ctrl-J top left corner
19011 # ctrl-K top right corner
19012 # ctrl-L bottom left corner
19013 # ctrl-M bottom right corner
19014 # ctrl-N horizontal line
19015 # ctrl-O vertical line
19016 # Unfortunately this cannot be fitted into the termcap/terminfo
19017 # description scheme.
19018 dp8242|datapoint 8242,
19021 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
19022 cr=^M, cub1=^H, cud1=^J,
19023 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
19024 home=^U, ht=^I, il1=\E^T, ind=^C,
19025 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19026 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
19027 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
19028 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
19029 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
19030 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19031 smso=\E^E, smul=\E^F,
19032 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
19034 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
19036 # These entries are DEC's official terminfos for its older terminals.
19037 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
19038 # Engineering for more information. Updated terminfos and termcaps
19039 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
19045 bel=^G, cr=^M, cub1=^H, cud1=^J,
19049 bel=^G, cr=^M, cub1=^H, cud1=^J,
19053 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19054 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19058 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19059 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19060 el=\EK, ht=^I, ind=^J, ri=\EI,
19061 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19062 vt61|vt-61|vt61.5|dec vt61,
19064 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19065 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19066 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19067 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19070 # The gigi does standout with red!
19071 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19072 gigi|vk100|dec gigi graphics terminal,
19075 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19076 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19077 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19078 el=\E[K, ht=^I, ind=^J,
19079 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19080 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19081 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19082 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19083 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19086 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19087 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19088 # grossly-overpriced failure (among other things, DEC's OS didn't include
19089 # a format program, so you had to buy pre-formatted floppies from DEC at
19090 # a hefty premium!).
19091 pro350|decpro|dec pro console,
19093 cols#80, it#8, lines#24,
19094 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19095 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19096 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19097 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19098 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19099 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19100 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19105 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19106 dw2|decwriter|dw|decwriter II,
19109 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19110 # \E(B Use U.S. character set (otherwise # => british pound !)
19111 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19112 # \E[w 10 char/in pitch
19113 # \E[1;132 full width horizontal margins
19114 # \E[2g clear all tab stops
19116 # \E[66t 66 lines/page (for \f)
19117 # \E[1;66r full vertical page can be printed
19118 # \E[4g clear vertical tab stops
19119 # \E> disable alternate keypad mode (so it transmits numbers!)
19120 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19121 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19124 # The dw3 does standout with wide characters.
19126 dw3|la120|decwriter III,
19129 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19130 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19131 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19132 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19136 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19137 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19139 # These aren't official
19140 ln03|dec ln03 laser printer,
19143 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19144 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19146 ln03-w|dec ln03 laser printer 132 cols,
19148 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19149 kcud1=^J, nel=^M^J, use=ln03,
19151 #### Delta Data (dd)
19154 # Untested. The cup sequence is hairy enough that it probably needs work.
19155 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19156 # There are BSD-derived termcap entries floating around for this puppy
19157 # that are *certainly* wrong.
19158 delta|dd5000|delta data 5000,
19161 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19162 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19163 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19165 #### Digital Data Research (ddr)
19168 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19169 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19171 cols#80, it#8, lines#24, vt#3,
19172 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19173 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19174 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19175 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19176 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19177 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19178 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19179 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19180 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19181 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19182 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19185 #### Evans & Sutherland
19188 # Jon Leech <leech@cs.unc.edu> tells us:
19189 # The ps300 was the Evans & Sutherland Picture System 300, a high
19190 # performance 3D vector graphics system with a bunch of specialized hardware.
19191 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19192 # evolutions including (limited) color versions such as the PS330C. PS300s
19193 # were effectively obsolete by the late 80s, replaced by raster graphics
19194 # systems, although specialized applications like molecular modelling
19195 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19196 # are out of production, though of course E&S is very much alive (in 1996).
19197 # (ps300: changed ":pt@:" to "it@" -- esr)
19199 ps300|Picture System 300,
19202 rmso@, rmul@, smso@, smul@, use=vt100,
19204 #### General Electric (ge)
19207 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19210 bel=^G, cr=^M, cud1=^J, ind=^J,
19212 #### Heathkit/Zenith
19215 # Here is a description of the H19 DIP switches:
19218 # 0-3 = baud rate as follows:
19223 # 0 1 0 1 1200 baud
19224 # 1 0 0 0 2400 baud
19225 # 1 0 1 0 4800 baud
19226 # 1 1 0 0 9600 baud
19227 # 1 1 0 1 19.2K baud
19229 # 4 = parity (0 = no parity)
19230 # 5 = even parity (0 = odd parity)
19231 # 6 = stick parity (0 = normal parity)
19232 # 7 = full duplex (0 = half duplex)
19235 # 0 = block cursor (0 = underscore cursor)
19236 # 1 = no key click (0 = keyclick)
19237 # 2 = wrap at end of line (0 = no wrap)
19238 # 3 = auto LF on CR (0 = no LF on CR)
19239 # 4 = auto CR on LF (0 = no CR on LF)
19240 # 5 = ANSI mode (0 = VT52 mode)
19241 # 6 = keypad shifted (0 = keypad unshifted)
19242 # 7 = 50Hz refresh (1 = 60Hz refresh)
19244 # Factory Default settings are as follows:
19246 # S401 1 0 0 0 1 1 0 0
19247 # S402 0 0 0 0 0 0 0 0
19248 # (h19: I added <rmam>/<smam> based on the init string;
19249 # also added empty <acsc> to suppress a tic warning -- esr)
19250 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19251 OTbs, am, mir, msgr,
19252 cols#80, it#8, lines#24,
19253 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19254 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19255 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19256 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19257 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19258 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19259 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19260 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19261 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19262 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19263 h19-bs|heathkit w/keypad shifted,
19264 rmkx=\Eu, smkx=\Et, use=h19-b,
19265 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19266 rmkx=\Eu, smkx=\Et, use=h19-u,
19267 # (h19: merged in <ip> from BSDI hp19-e entry>;
19268 # also added empty <acsc> to suppress a tic warning --esr)
19269 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19270 # Tim tells us that:
19271 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19272 # This terminal suffers from the same famous insert-mode padding lossage
19273 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19274 # unusable on this box, since even a half-scroll up or down the window
19275 # causes flaming terminal death.
19277 # On the Z19, the only way I have found around this problem is to remove
19278 # the :al: and :dl: entries entirely. No amount of extra padding will
19279 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19280 # makes Emacs a little slower, but it remains in the land of the living.
19282 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19283 OTbs, am, eslok, hs, mir, msgr,
19284 cols#80, it#8, lines#24,
19285 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19286 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19287 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19288 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19289 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19290 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19291 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19292 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19293 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19294 h19-u|heathkit with underscore cursor,
19295 cnorm@, cvvis@, use=h19-b,
19296 h19-g|h19g|heathkit w/block cursor,
19297 cnorm=\Ex4, cvvis@, use=h19-b,
19298 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19300 dl1=\EM, il1=\EL, use=h19,
19302 # The major problem with the Z29 is that it requires more padding than the Z19.
19304 # The problem with declaring an H19 to be synonymous with a Z29 is that
19305 # it needs more padding. It especially loses if a program attempts
19306 # to put the Z29 into insert mode and insert text at 9600 baud. It
19307 # even loses worse if the program attempts to insert tabs at 9600
19308 # baud. Adding padding to text that is inserted loses because in
19309 # order to make the Z29 not die, one must add so much padding that
19310 # whenever the program tries to use insert mode, the effective
19311 # rate is about 110 baud.
19313 # What program would want to put the terminal into insert mode
19314 # and shove stuff at it at 9600 baud you ask?
19316 # Emacs. Emacs seems to want to do the mathematically optimal
19317 # thing in doing a redisplay rather than the practical thing.
19318 # When it is about to output a line on top of a line that is
19319 # already on the screen, instead of just killing to the end of
19320 # the line and outputting the new line, it compares the old line
19321 # and the new line and if there are any similarities, it
19322 # constructs the new line by deleting the text on the old line
19323 # on the terminal that is already there and then inserting new
19324 # text into the line to transform it into the new line that is
19325 # to be displayed. The Z29 does not react kindly to this.
19327 # But don't cry for too long.... There is a solution. You can make
19328 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19329 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19330 # line will be really slow", you say. Well there is a sort of a
19331 # solution to that too. There is an insert character option on
19332 # the Z29 that will insert one character. Unfortunately, it
19333 # involves putting the terminal into ansi mode, inserting the
19334 # character, and changing it back to H19 mode. All this takes 12
19335 # characters. Pretty expensive to insert one character, but it
19336 # works. Either Emacs doesn't try to use its inserting hack when
19337 # it's only given an insert character ability or the Z29 doesn't
19338 # require padding with this (the former is probably more likely,
19339 # but I haven't checked it out).
19340 # (z29: added empty <acsc> to suppress a tic warning, merged in
19341 # status line capabilities from BRL entry --esr)
19342 z29|zenith29|z29b|zenith z29b,
19343 OTbs, OTpt, am, eslok, hs, mir, msgr,
19344 OTkn#10, cols#80, lines#24,
19345 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19346 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19347 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19348 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19349 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19350 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19351 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19352 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19353 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19354 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19355 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19356 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19357 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19358 # the world is stable. <rs1> causes the terminal to be reset to the state
19359 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19360 # cursor, bc -> block cursor.
19361 # From: Mike Meyers
19362 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19363 # looks vt100-compatible -- esr)
19364 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19365 OTbs, OTpt, am, eslok, hs, mir, msgr,
19366 OTkn#10, cols#80, it#8, lines#24,
19367 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19368 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19369 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19370 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19371 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19372 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19373 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19374 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19375 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19376 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19377 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19378 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19379 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19380 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19381 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19382 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19383 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19384 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19386 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19387 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19389 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19390 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19392 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19393 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19394 am, eslok, hs, mc5i, mir, msgr, xon,
19396 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19397 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19398 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19399 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19400 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19401 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19402 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19403 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19404 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19405 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19406 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19407 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19408 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19409 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19410 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19411 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19412 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19413 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19414 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19416 # From: Brad Brahms <Brahms@USC-ECLC>
19417 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19418 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19419 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19420 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19421 OTbs, OTpt, mir, msgr,
19422 OTkn#10, cols#80, it#8, lines#24,
19423 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19424 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19425 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19426 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19427 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19428 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19429 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19430 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19431 smir=\E@, smso=\Ep,
19432 p19|h19-b with il1/dl1,
19433 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19434 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19435 # (ztx: removed duplicate :sr: -- esr)
19436 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19437 OTbs, am, eslok, hs,
19438 cols#80, it#8, lines#24,
19439 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19440 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19441 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19442 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19443 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19444 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19445 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19446 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19448 #### IMS International (ims)
19450 # There was a company called IMS International located in Carson City,
19451 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19452 # bus/Z80 hardware and a line of terminals called Ultimas.
19455 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19456 ims950-b|bare ims950 no init string,
19458 # (ims950: removed obsolete ":ko@:" -- esr)
19459 ims950|ims televideo 950 emulation,
19461 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19462 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19463 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19464 ims950-rv|ims tvi950 rev video,
19466 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19467 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19468 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19470 cols#80, it#8, lines#24,
19471 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19472 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19473 ht=^I, if=/usr/share/tabset/vt100,
19474 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19475 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19476 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19479 #### Intertec Data Systems
19481 # I think this company is long dead as of 1995. They made an early CP/M
19482 # micro called the "Intertec Superbrain" that was moderately popular,
19483 # then sank out of sight.
19486 superbrain|intertec superbrain,
19489 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19490 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19491 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19492 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19493 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19494 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19495 # and the reverse is actually true. Try it. -- esr)
19496 intertube|intertec|Intertec InterTube,
19499 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19500 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19501 ind=^J, rmso=\E0@, smso=\E0P,
19502 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19503 # are typing and a command comes in, the keystrokes you type get interspersed
19504 # with the command and it messes up
19505 intertube2|intertec data systems intertube 2,
19507 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19508 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19509 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19511 #### Ithaca Intersystems
19513 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19514 # past. They used to be reachable at:
19516 # Ithaca Intersystems
19517 # 1650 Hanshaw Road
19518 # Ithaca, New York 14850
19520 # However, the outfit went bankrupt years ago.
19523 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19524 # These entries were written (originally in termcap syntax) by Brian Yandell
19525 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19526 # University of Wisconsin.
19528 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19529 # removed <if=/usr/share/tabset/init.graphos> and
19530 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19531 graphos|graphos III,
19533 cols#80, it#8, lines#24,
19534 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19535 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19536 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19537 cuu=\E[%p1%dA, cuu1=\E[A,
19538 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19539 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19540 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19541 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19542 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19543 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19544 smir=\E[4h, smso=\E[7m,
19545 graphos-30|graphos III with 30 lines,
19547 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19551 # These people used to be reachable at:
19554 # 1393 Main Street,
19555 # Waltham, MA 02154
19556 # Vox: (617)-890-5796.
19558 # However, if you call that number today you'll get an insurance company.
19559 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19560 # 26 Feb 1997 that says:
19562 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19563 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19564 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19565 # panel-mount etc). I can be emailed at sonfour@aol.com
19567 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19568 # dated 1984. According to the manual, it featured Tek 4010/4014
19569 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19572 modgraph|mod24|modgraph terminal emulating vt100,
19575 cvvis=\E\^9;0s\E\^7;1s,
19576 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19577 rf@, ri=\EM\E[K$<5/>, use=vt100,
19578 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19579 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19581 cols#80, it#8, lines#24,
19582 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19583 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19584 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19585 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19588 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19589 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19590 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19591 # mark and using delete-to-killbuffer work correctly. However, we would
19592 # like normal mode of operation to be using a Modgraph with 48 line setting.
19593 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19594 # the setting mark and delete-to-killbuffer results in the deletion of only
19595 # the line the mark is set on.
19596 # We've discovered that the delete-to-killbuffer works correctly
19597 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19598 # the first line disappears but a ctrl-l shows that it did work
19600 modgraph48|mod|Modgraph w/48 lines,
19601 OTbs, OTpt, am, xenl,
19602 cols#80, it#8, lines#48, vt#3,
19603 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19604 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19605 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19606 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19607 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19608 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19609 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19610 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19611 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19612 smso=\E[7m, smul=\E[4m,
19614 #### Morrow Designs
19616 # This was George Morrow's company. They started in the late 1970s making
19617 # S100-bus machines. They used to be reachable at:
19620 # 600 McCormick St.
19621 # San Leandro, CA 94577
19623 # but they're long gone now (1995).
19626 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19627 # Jeff's specimen was dated June 1984.
19628 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19629 mt70|mt-70|Morrow MD-70; native Morrow mode,
19630 am, mir, msgr, xon,
19631 cols#80, it#8, lines#24,
19632 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19633 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19634 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19635 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19636 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19637 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19638 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19639 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19640 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19641 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19642 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19643 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19644 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19645 smul=\EG1, tbc=\E0, use=adm+sgr,
19650 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19652 ex155|Motorola Exorterm 155,
19654 OTkn#5, OTug#1, cols#80, lines#24,
19655 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19656 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19657 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19658 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19659 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19663 # This company is still around in 1995, manufacturing point-of-sale systems.
19665 omron|Omron 8025AG,
19668 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19669 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19670 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19674 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19675 # were competition for things like the Tektronics 4025.
19678 # Ramtek 6221 from BRL, probably by Doug Gwyn
19679 # The following SET-UP modes are assumed for normal operation:
19680 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19681 # NEWLINE_OFF 80_COLUMNS
19682 # Other SET-UP modes may be set for operator convenience or communication
19683 # requirements; I recommend
19684 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19685 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19686 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19687 # Note that the Control-E key is useless on this brain-damaged terminal. No
19688 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19689 rt6221|Ramtek 6221 80x24,
19690 OTbs, OTpt, msgr, xon,
19691 OTkn#4, cols#80, it#8, lines#24, vt#3,
19692 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19693 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19694 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19695 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19696 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19697 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19698 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19699 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19700 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19701 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19702 rmso=\E[m, rmul=\E[m,
19703 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19704 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19705 smul=\E[4m, tbc=\E[3g,
19706 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19707 rt6221-w|Ramtek 6221 160x48,
19708 cols#160, lines#48,
19709 ll=\E[48;1H, use=rt6221,
19714 # RCA VP3301 or VP3501
19715 rca|rca vp3301/vp3501,
19718 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19719 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19725 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19726 # The following SET-UP modes are assumed for normal operation:
19727 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19728 # ONLINE ANSI CURSOR_VISIBLE
19729 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19730 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19731 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19732 # For use with graphics software, all graphics modes should be set to factory
19733 # default. Other SET-UP modes may be set for operator convenience or
19734 # communication requirements. No delays are specified; use "stty ixon -ixany"
19735 # to enable DC3/DC1 flow control!
19736 # I commented out the scrolling capabilities since they are too slow.
19737 hirez100|Selanar HiREZ-100,
19738 OTbs, OTpt, mir, msgr, xon,
19739 OTkn#4, cols#80, it#8, lines#48, vt#3,
19740 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19741 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19742 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19743 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19744 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19745 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19746 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19747 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19748 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19749 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19750 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19751 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19752 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19753 smul=\E[4m, tbc=\E[3g,
19754 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19755 cols#132, use=hirez100,
19760 # From University of Wisconsin
19761 vsc|Signetics Vsc Video driver by RMC,
19763 cols#80, it#8, lines#26,
19764 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19765 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19766 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19767 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19771 # Alan Frisbie <frisbie@flying-disk.com> writes:
19773 # As you may recall, the Soroc logo consisted of their name,
19774 # with the letter "S" superimposed over an odd design. This
19775 # consisted of a circle with a slightly smaller 15 degree (approx.)
19776 # wedge with rounded corners inside it. The color was sort of
19777 # a metallic gold/yellow.
19779 # If I had been more of a beer drinker it might have been obvious
19780 # to me, but it took a clue from their service department to make
19781 # me exclaim, "Of course!" The circular object was the top of
19782 # a beer can (the old removable pop-top style) and "Soroc" was an
19783 # anagram for "Coors".
19785 # I can just imagine the founders of the company sitting around
19786 # one evening, tossing back a few and trying to decide what to
19787 # call their new company and what to use for a logo.
19790 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19791 soroc120|iq120|soroc|soroc iq120,
19792 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19793 kcuf1=^L, kcuu1=^K, use=adm3a,
19794 soroc140|iq140|soroc iq140,
19797 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19798 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19799 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19800 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19801 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19802 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19803 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19805 #### Southwest Technical Products
19807 # These guys made an early personal micro called the M6800.
19808 # The ct82 was probably its console terminal.
19811 # (swtp: removed obsolete ":bc=^D:" -- esr)
19812 swtp|ct82|southwest technical products ct82,
19815 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19816 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19817 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19818 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19819 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19823 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19825 # Synertek used to make ICs, various 6502-based single-board process
19826 # control and hobbyist computers, and assorted peripherals including a
19827 # series of small inexpensive terminals (I think they were one of the
19828 # first to have a "terminal-on-a-keyboard", where the terminal itself
19829 # was only slightly larger than the keyboard).
19831 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19832 # was a 40x24 terminal that could connect to a standard TV through a
19833 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19834 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19835 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19836 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19837 # ROM and 2 ROMs as character generators. They were incredibly simple,
19838 # and I've never had any problems with mine (witness the fact that mine
19839 # was made in 1981 and is still working great... I've blown the video
19840 # output transistor a couple of times, but it's a 2N2222 :-)
19842 # The KTM-3 (which is what is listed in the terminfo file) was their
19843 # attempt at putting a KTM-2 in a box (and some models came with a
19844 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19845 # control and escape sequences are very different. The KTM-3 was always
19846 # real broken, at least according to the folks I've talked to about it.
19848 # The padding in the entry is probably off--these terminals were very
19849 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19850 # anyone with any sanity replaced the ROMs with something that provided
19851 # a reasonable subset of VT100 functionality, since the usual ROMs were
19852 # obviously very primitive... oh, you could get an upgraded ROM from
19853 # Synertek for some incredible amount of money, but what hacker with an
19854 # EPROM burner would do that? :)
19856 # Sorry I don't have any contact info; I believe they were located in
19857 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19858 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19859 # business these days.
19862 # Tested, seems to work fine with vi.
19863 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19866 clear=^Z, cub1=^H, cuf1=^L,
19867 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19869 #### Tab Office Products
19871 # TAB Products Co. - Palo Alto, California
19872 # Electronic Office Products,
19873 # 1451 California Avenue 94304
19875 # I think they're out of business.
19878 # The tab 132 uses xon/xoff, so no padding needed.
19879 # <smkx>/<rmkx> have nothing to do with arrow keys.
19880 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19881 # Seems to be no way to get rid of status line.
19882 # The manual for this puppy was dated June 1981. It claims to be VT52-
19883 # compatible but looks more vt100-like.
19884 tab132|tab|tab132-15|tab 132/15,
19886 OTdN@, cols#80, lines#24, lm#96,
19887 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19888 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19889 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19890 tab132-w|tab132 in wide mode,
19892 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19893 tab132-rv|tab132 in reverse-video mode,
19894 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19895 tab132-w-rv|tab132 in reverse-video/wide mode,
19896 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19901 # Research Incorporated
19902 # 6425 Flying Cloud Drive
19903 # Eden Prairie, MN 55344
19904 # Vox: (612)-941-3300
19906 # The Teleray terminals were all discontinued in 1992-93. RI still services
19907 # and repairs these beasts, but no longer manufactures them. The Teleray
19908 # people believe that all the types listed below are very rare now (1995).
19909 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19910 # Model 100) that were ANSI-compatible.
19912 # Note two things called "teleray". Reorder should move the common one
19913 # to the front if you have either. A dumb teleray with the cursor stuck
19914 # on the bottom and no obvious model number is probably a 3700.
19917 t3700|dumb teleray 3700,
19920 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19921 t3800|teleray 3800 series,
19923 cols#80, it#8, lines#24,
19924 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19925 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19926 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19927 t1061|teleray|teleray 1061,
19928 OTbs, am, km, xhp, xt,
19929 cols#80, it#8, lines#24, xmc#1,
19930 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19931 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19932 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19933 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19934 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19935 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19936 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19938 t1061f|teleray 1061 with fast PROMs,
19939 dl1=\EM, il1=\EL, ip@, use=t1061,
19940 # "Teleray Arpa Special", officially designated as
19941 # "Teleray Arpa network model 10" with "Special feature 720".
19942 # This is the new (1981) fast microcode updating the older "arpa" proms
19943 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19944 # converts the keypad to programmable function keys, and has other goodies.
19945 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19946 # programs handle such lossage properly.
19947 # Note: this is NOT the old termcap's "t1061f with fast proms."
19948 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19949 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19950 t10|teleray 10 special,
19952 cols#80, it#8, lines#24, xmc#2,
19953 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
19954 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19955 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19956 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19958 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19959 # back/forth words. Put the function keys (f1-f10) where they can be
19960 # found, and turn off the other magic keys along the top row, except
19961 # for line/local. Do the magic appropriate to make the page shifts work.
19962 # Also toggle ^S/^Q for those of us who use Emacs.
19964 am, da, db, mir, xhp, xt,
19966 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19967 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19968 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19969 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19970 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19971 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19972 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19973 smso=\E[7m, smul=\E[4m,
19975 #### Texas Instruments (ti)
19978 # The Silent 700 was so called because it was built around a quiet thermal
19979 # printer. It was portable, equipped with an acoustic coupler, and pretty
19980 # neat for its day.
19981 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19984 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19987 # Texas Instruments 916 VDT 7 bit control mode
19989 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19991 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19992 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19993 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19994 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19995 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19996 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19997 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19998 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19999 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
20000 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
20001 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
20002 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
20003 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
20004 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
20007 # Texas Instruments 916 VDT 8 bit control mode
20009 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
20010 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
20011 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
20012 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
20013 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20014 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
20015 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
20017 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
20019 ti916-132|Texas Instruments 916 VDT vt220 132 column,
20020 cols#132, use=ti916,
20022 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
20024 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
20025 cols#132, use=ti916-8,
20026 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
20028 cols#80, it#8, lines#24,
20029 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20030 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20031 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20032 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20033 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20034 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20035 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
20036 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
20037 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
20038 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20039 smul=\E[4m, tbc=\E[3g,
20040 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
20042 cols#80, it#8, lines#24,
20043 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20044 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20045 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20046 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20047 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20048 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20049 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
20050 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
20051 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
20052 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
20053 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20054 smul=\E[4m, tbc=\E[3g,
20055 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20056 cols#132, use=ti924,
20057 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20058 cols#132, use=ti924-8,
20059 ti931|Texas Instruments 931 VDT,
20062 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20063 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20064 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20065 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20066 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20067 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20068 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20069 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20070 sgr0=\E4@, smso=\E4A, smul=\E4D,
20071 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20072 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20073 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20074 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20075 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20076 ti_ansi|basic entry for ti928,
20077 am, bce, eo, xenl, xon,
20078 colors#8, cols#80, it#8, lines#25, pairs#64,
20079 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20080 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20081 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20082 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20083 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20084 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20085 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20086 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20087 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20088 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20089 smso=\E[7m, smul=\E[4m,
20091 # 928 VDT 7 bit control mode
20093 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20094 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20095 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20096 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20097 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20098 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20100 # 928 VDT 8 bit control mode
20102 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20103 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20104 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20105 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20106 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20107 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20108 kpp=\233T, kprt=\23335~, use=ti_ansi,
20113 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20114 # had just <smso>=\EG6 which I think means standout was supposed to be
20115 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20116 # <invis> might work-- esr)
20117 zen30|z30|zentec 30,
20120 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20121 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20122 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20123 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20124 smul@, use=adm+sgr,
20125 # (zen50: this had extension capabilities
20126 # :BS=^U:CL=^V:CR=^B:
20127 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20128 # which were also in the original entry -- esr)
20129 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20130 zen50|z50|zentec zephyr,
20132 cols#80, lines#24, xmc#1,
20133 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20134 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20135 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20136 rmul@, smul@, use=adm+sgr,
20138 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20139 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20142 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20143 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20144 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20145 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20146 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20147 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20148 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20149 smso=\EM$, smul=\EM0,
20151 ######## OBSOLETE UNIX CONSOLES
20154 #### Apollo consoles
20156 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20157 # labeled HP700s now.
20160 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20161 apollo|apollo console,
20164 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20165 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20166 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20167 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20168 smso=\ES, smul=\EU, vpa=\EO+\s,
20170 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20171 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20172 # both these capabilities.
20173 apollo_15P|apollo 15 inch display,
20174 rmir@, smir@, use=vt132,
20175 apollo_19L|apollo 19 inch display,
20176 rmir@, smir@, use=vt132,
20177 apollo_color|apollo color display,
20178 rmir@, smir@, use=vt132,
20180 #### Convergent Technology
20182 # Burroughs bought Convergent shortly before it merged with Univac.
20183 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20184 # from 1991 or earlier).
20187 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20188 # (aws: removed unknown :dn=^K: -- esr)
20189 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20191 OTug#0, cols#80, lines#28, xmc#0,
20192 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20193 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20194 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20195 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20196 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20197 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20199 awsc|Convergent Technologies AWS workstation under CTOS,
20201 OTug#0, cols#80, lines#24, xmc#0,
20202 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20203 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20204 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20205 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20211 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20212 # The digital uVax II's had a graphic display called a qdss. It was
20213 # supposed to be a high performance graphic accelerator, but it was
20214 # late to market and barely appeared before faster dumb frame buffers
20215 # appeared. I have only used this display while running X11. However,
20216 # during bootup, it was in text mode, and probably had a terminal emulator
20217 # within it. And that is what your termcap entry is for. In graphics
20218 # mode the screen size is 1024x864 pixels.
20219 qdss|qdcons|qdss glass tty,
20221 cols#128, lines#57,
20222 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20223 cup=\E=%p1%c%p2%c, cuu1=^K,
20225 #### Fortune Systems consoles
20227 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20228 # in their day; I (esr) used one myself for a year or so around 1984.
20229 # They had no graphics, though, and couldn't compete against Suns and
20233 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20234 # (This had extension capabilities
20235 # :rv=\EH:re=\EI:rg=0:GG=0:\
20236 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20237 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20238 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20239 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20240 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20241 # to force both magic cookie glitches off. Once upon a time, I
20242 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20243 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20244 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20245 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20246 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20247 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20248 fos|fortune|Fortune system,
20251 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20252 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20253 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20254 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20255 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20256 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20257 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20258 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20259 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20260 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20261 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20262 smso=^\H`, smul=^\HP,
20264 #### Masscomp consoles
20266 # Masscomp has gone out of business. Their product line was purchased by
20267 # comany in Georgia (US) called "XS International", parts and service may
20268 # still be available through them.
20271 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20272 masscomp|masscomp workstation console,
20274 cols#80, it#8, lines#24,
20275 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20276 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20277 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20278 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20279 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20280 masscomp1|masscomp large screen version 1,
20281 cols#104, lines#36, use=masscomp,
20282 masscomp2|masscomp large screen version 2,
20283 cols#64, lines#21, use=masscomp,
20285 ######## OTHER OBSOLETE TYPES
20287 # These terminals are *long* dead -- these entries are retained for
20288 # historical interest only.
20291 #### Obsolete non-ANSI software emulations
20294 # CTRM terminal emulator
20295 # 1. underlining is not allowed with colors: first, is is simulated by
20296 # black on white, second, it disables background color manipulations.
20297 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20298 # so we have to save their status in the static registers A, B and H
20299 # respectively, to be able to restore them when color changes
20300 # (because any color change turns off ALL attributes)
20301 # 3. <bold> and <rev> sequences alternate modes,
20302 # rather than simply entering them. Thus we have to check the
20303 # static register B and H to determine the status, before sending the
20305 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20306 # and then reset colors
20307 # 5. implementation of the protect mode would badly penalize the performance.
20308 # we would have to use \E&bn sequence to turn off colors (as well as all
20309 # other attributes), and keep the status of protect mode in yet another
20310 # static variable. If someone really needs this mode, they would have to
20311 # create another terminfo entry.
20312 # 6. original color-pair is white on black.
20313 # store the information about colors into static registers
20314 # 7. set foreground color. it performs the following steps.
20315 # 1) turn off all attributes
20316 # 2) turn on the background and video attributes that have been turned
20317 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20318 # 3) turn on foreground attributes
20319 # 4) store information about foreground into U,V,W static registers
20320 # 8. turn on background: similar to turn on foreground above
20321 ctrm|C terminal emulator,
20323 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20324 pairs#63, pb#19200, vt#6,
20325 bel=^G, blink=\E&dA%{1}%PA,
20326 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20327 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20328 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20329 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20330 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20331 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20332 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20333 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20334 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20335 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20336 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20337 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20338 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20339 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20340 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20342 # gs6300 - can't use blue foreground, it clashes with underline;
20343 # it's simulated with cyan
20344 # Bug: The <op> capability probably resets attributes.
20345 # (gs6300: commented out <rmln> (no <smln>) --esr)
20346 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20347 am, bce, msgr, xon,
20348 colors#8, cols#80, it#8, lines#24, pairs#63,
20349 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20350 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20351 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20352 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20353 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20354 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20355 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20356 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20357 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20358 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20359 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20360 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20361 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20362 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20364 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20365 # MS-Kermit with Heath-19 emulation mode enabled
20366 # (h19k: changed ":pt@:" to ":it@"
20367 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20372 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20373 # Software (formerly Peripherals Computers & Supplies, Inc) of
20374 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20375 # also be reached at support@synergy.com.
20376 versaterm|versaterm vt100 emulator for the macintosh,
20378 cols#80, it#8, lines#24,
20379 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20380 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20381 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20382 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20383 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20384 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20385 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20386 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20387 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20388 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20389 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20390 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20393 # From: Rick Thomas <ihnp4!btlunix!rbt>
20394 # (xtalk: I added <rmam>/<smam> based on the init string.
20395 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20396 am, mir, msgr, xon,
20397 cols#80, it#8, lines#24, vt#3, xmc#1,
20398 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20399 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20400 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20401 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20402 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20403 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20404 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20405 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20406 rmkx=\E[?1l\E>, rmso=\E[m\s,
20407 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20408 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20409 tbc=\E[3g, use=vt100+fnkeys,
20411 # The official PC terminal emulator program of the AT&T Product Centers.
20412 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20413 simterm|attpc running simterm,
20416 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20417 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20418 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20419 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20421 #### Daisy wheel printers
20423 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20424 # wheel terminals. These are now largely obsolete.
20427 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20428 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20431 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20432 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20433 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20435 is2=\r \E9, use=diablo1620,
20436 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20437 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20438 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20440 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20442 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20444 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20445 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20447 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20448 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20449 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20450 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20451 # around all of memory. Note that return puts a blank ("a return character")
20452 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20453 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20454 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20455 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20456 # I have been unable to get tabs set in all 96 lines - it always leaves at
20457 # least one line with no tabs in it, and once you tab through that line,
20458 # it completely weirds out.
20459 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20462 cols#80, lines#24, lm#96,
20463 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20464 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20465 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20466 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20467 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20471 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20472 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20473 gsi|mystery gsi terminal,
20476 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20478 aj830|aj832|aj|anderson jacobson,
20480 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20482 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20483 aj510|Anderson-Jacobson model 510,
20486 clear=^L, cub1=^H, cuf1=\EX,
20487 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20488 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20489 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20490 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20491 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20493 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20494 # This is incomplete, but it's a start.
20495 nec5520|nec|spinwriter|nec 5520,
20498 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20499 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20501 qume5|qume|Qume Sprint 5,
20504 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20505 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20506 # I suspect the xerox 1720 is the same as the diablo 1620.
20507 xerox1720|x1720|x1750|xerox 1720,
20510 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20513 #### Miscellaneous obsolete terminals, manufacturers unknown
20515 # If you have any information about these (like, a manufacturer's name,
20516 # and a date on the serial-number plate) please send it!
20518 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20521 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20522 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20525 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20526 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20527 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20528 cops10|cops|cops-10|cops 10,
20531 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20532 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20533 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20535 # (d132: removed duplicate :ic=\E5:,
20536 # merged in capabilities from a BRL entry -- esr)
20537 d132|datagraphix|datagraphix 132a,
20540 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20541 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20542 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20543 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20544 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20545 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20546 # mode (which is what this entry looks like) and several other lesser-known
20549 OTbs, am, da, db, msgr, xhp,
20550 cols#80, it#8, lines#24,
20551 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20552 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20553 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20554 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20555 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20556 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20557 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20558 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20559 digilog|digilog 333,
20562 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20564 # The DWK was a terminal manufactured in the Soviet Union c.1986
20565 dwk|dwk-vt|dwk terminal,
20567 cols#80, it#8, lines#24,
20568 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20569 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20570 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20571 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20572 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20573 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20574 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20575 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20576 sgr0=\EX, smacs=\EF, smso=\ET,
20577 env230|envision230|envision 230 graphics terminal,
20579 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
20580 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20581 sgr0=\E[0m$<2>, smacs@, use=vt100,
20582 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20583 # coupler attached, the whole rig fitting in a suitcase and more or less
20584 # portable. Hot stuff for c.1977 :-) -- esr
20585 ep48|ep4080|execuport 4080,
20588 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20589 ep40|ep4000|execuport 4000,
20590 cols#136, use=ep4080,
20591 # Adam Thompson <athompso@pangea.ca> tells us:
20592 # Informer series - these are all portable units, resembling older
20593 # automatic bread-baking machines. The terminal looks like a `clamshell'
20594 # design, but isn't. The structure is similar to the Direct terminals,
20595 # but only half the width. The entire unit is only about 10" wide.
20596 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20597 # keyboard. All the keys are crammed together, much like some laptop
20598 # PCs today, but perhaps less well organized...all these units have a
20599 # bewildering array of plugs on the back, including a built-in modem.
20600 # The 305 was a color version of the 304; the 306 and 307 were mono and
20601 # color terminals built for IBM bisync protocols.
20602 # From: Paul Leondis <unllab@amber.berkeley.edu>
20603 ifmr|Informer D304,
20606 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20607 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20608 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20610 # Entry largely based on wy60 and has the features of wy60ak.
20611 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20612 am, bw, hs, km, mir, msgr, ul, xon,
20613 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20614 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20615 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20616 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20617 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20618 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20619 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20621 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20622 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20623 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20624 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20625 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20626 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20627 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20628 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20629 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20630 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20631 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20632 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20633 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20634 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20635 rs3=\EwG\Ee($<150>,
20636 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20637 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20638 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20639 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20640 uc=\EG8\EG0, use=adm+sgr,
20641 teletec|Teletec Datascreen,
20644 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20646 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20647 # This description is for the LANPAR Technologies VISION 3220
20648 # terminal from 1984/85. The function key definitions k0-k5 represent the
20649 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20650 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20652 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20653 # I had a couple of scopes (3221) like this once where I used to work, around
20654 # the 1987 time frame if memory serves me correctly. These scopes were made
20655 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
20656 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
20657 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
20658 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
20659 # (3221) cost about $1500 each, and one was always broken -- had to be sent
20660 # back to the shop for repairs.
20661 # The only real advantage these scopes had over the VT-240's were:
20662 # 1) They were faster in the Regis display, or at least the ones I did
20663 # 2) They had a handy debugging feature where you could split-screen the
20664 # scope, the graphics would appear on the top, and the REGIS commands would
20665 # appear on the bottom. I don't remember the VT-240s being able to do that.
20666 # I would swear that LANPAR Technologies was in MA someplace, but since I
20667 # don't work at the same place anymore, and those terminals and manuals were
20668 # long since junked, I cannot be any more sure than that.
20670 # (v3220: removed obsolete ":kn#10:",
20671 # I added <rmam>/<smam> based on the init string -- esr)
20672 v3220|LANPAR Vision II model 3220/3221/3222,
20673 OTbs, am, mir, xenl,
20674 cols#80, it#8, lines#24,
20675 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20676 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20677 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
20678 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
20679 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
20680 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
20681 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
20682 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20683 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
20684 ######## ICH/ICH1 VERSUS RMIR/SMIR
20686 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
20687 # are present; the symptom is doubled characters in an update using insert.
20688 # These applications are technically correct; in both 4.3BSD termcap and
20689 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
20690 # unless the terminal needs both. To my knowledge, no terminal still in this
20691 # file requires both other than the very obsolete dm2500.
20693 # For ncurses-based applications this is not a problem, as ncurses uses
20694 # one or the other as appropriate but never mixes the two. Therefore we
20695 # have not corrected entries like `linux' and `xterm' that specify both.
20696 # If you see doubled characters from these, use the linux-nic and xterm-nic
20697 # entries that suppress ich/ich1. And upgrade to ncurses!
20700 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
20702 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
20703 # ECMA-48 standards are said to be almost identical, but are not the same
20704 # as X3.64 (though for practical purposes they are close supersets of it).
20706 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
20707 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
20708 # Coded Character Sets"), include your snail-mail address, and you should
20709 # receive the document in due course. Don't expect an email acknowledgement.
20711 # Related standards include "X3.4-1977: American National Standard Code for
20712 # Information Interchange" (the ASCII standard) and "X3.41.1974:
20713 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
20714 # American National Standard for Information Interchange." I believe (but
20715 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
20719 #### VT100/ANSI/ECMA-48
20721 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
20722 # and ECMA-48 Control Functions for Coded Character Sets.
20724 # Much of the content of this comment is adapted from a table prepared by
20725 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
20726 # discussion of some terminfo-related issues, and updates to capture ECMA-48
20727 # have been added. Control functions described in ECMA-48 only are tagged
20728 # with * after their names.
20730 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
20731 # sequences. In the main table, \E stands for an escape (\033) character,
20732 # SPC for space. Pn stands for a single numeric parameter to be inserted
20733 # in decimal ASCII. Ps stands for a list of such parameters separated by
20734 # semicolons. Parameter meanings for most parametrized sequences are
20735 # decribed in the notes.
20737 # Sequence Sequence Parameter or
20738 # Mnemonic Name Sequence Value Mode terminfo
20739 # -----------------------------------------------------------------------------
20740 # APC Applicatn Program Command \E _ - Delim -
20741 # BEL Bell * ^G - - bel
20742 # BPH Break Permitted Here * \E B - * -
20743 # BS Backpace * ^H - EF -
20744 # CAN Cancel * ^X - - - (A)
20745 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
20746 # CCH Cancel Previous Character \E T - - -
20747 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
20748 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
20749 # CMD Coding Method Delimiter * \E
20750 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
20751 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
20752 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
20753 # CSI Control Sequence Intro \E [ - Intro -
20754 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
20755 # CUB Cursor Backward \E [ Pn D 1 eF cub
20756 # CUD Cursor Down \E [ Pn B 1 eF cud
20757 # CUF Cursor Forward \E [ Pn C 1 eF cuf
20758 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
20759 # CUU Cursor Up \E [ Pn A 1 eF cuu
20760 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
20761 # DA Device Attributes \E [ Pn c 0 - -
20762 # DAQ Define Area Qualification \E [ Ps o 0 - -
20763 # DCH Delete Character \E [ Pn P 1 eF dch
20764 # DCS Device Control String \E P - Delim -
20765 # DL Delete Line \E [ Pn M 1 eF dl
20766 # DLE Data Link Escape * ^P - - -
20767 # DMI Disable Manual Input \E \ - Fs -
20768 # DSR Device Status Report \E [ Ps n 0 - - (I)
20769 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
20770 # EA Erase in Area \E [ Ps O 0 eF - (J)
20771 # ECH Erase Character \E [ Pn X 1 eF ech
20772 # ED Erase in Display \E [ Ps J 0 eF ed (J)
20773 # EF Erase in Field \E [ Ps N 0 eF -
20774 # EL Erase in Line \E [ Ps K 0 eF el (J)
20775 # EM End of Medium * ^Y - - -
20776 # EMI Enable Manual Input \E b Fs -
20777 # ENQ Enquire ^E - - -
20778 # EOT End Of Transmission ^D - * -
20779 # EPA End of Protected Area \E W - - - (K)
20780 # ESA End of Selected Area \E G - - -
20781 # ESC Escape ^[ - - -
20782 # ETB End Transmission Block ^W - - -
20783 # ETX End of Text ^C - - -
20784 # FF Form Feed ^L - - -
20785 # FNK Function Key * \E [ Pn SPC W - - -
20786 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
20787 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
20788 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
20789 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
20790 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
20791 # HPB Char Position Backward \E [ j 1 FE -
20792 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
20793 # HT Horizontal Tab * ^I - FE - (N)
20794 # HTJ Horz Tab w/Justification \E I - FE -
20795 # HTS Horizontal Tab Set \E H - FE hts
20796 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
20797 # ICH Insert Character \E [ Pn @ 1 eF ich
20798 # IDCS ID Device Control String \E [ SPC O - * -
20799 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
20800 # IL Insert Line \E [ Pn L 1 eF il
20801 # IND Index \E D - FE -
20802 # INT Interrupt \E a - Fs -
20803 # JFY Justify \E [ Ps SPC F 0 FE -
20804 # IS1 Info Separator #1 * ^_ - * -
20805 # IS2 Info Separator #1 * ^^ - * -
20806 # IS3 Info Separator #1 * ^] - * -
20807 # IS4 Info Separator #1 * ^\ - * -
20808 # LF Line Feed ^J - - -
20809 # LS1R Locking Shift Right 1 * \E ~ - - -
20810 # LS2 Locking Shift 2 * \E n - - -
20811 # LS2R Locking Shift Right 2 * \E } - - -
20812 # LS3 Locking Shift 3 * \E o - - -
20813 # LS3R Locking Shift Right 3 * \E | - - -
20814 # MC Media Copy \E [ Ps i 0 - - (S)
20815 # MW Message Waiting \E U - - -
20816 # NAK Negative Acknowledge * ^U - * -
20817 # NBH No Break Here * \E C - - -
20818 # NEL Next Line \E E - FE nel (D)
20819 # NP Next Page \E [ Pn U 1 eF -
20820 # NUL Null * ^@ - - -
20821 # OSC Operating System Command \E ] - Delim -
20822 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20823 # PFS Page Format Selection * \E Pn SPC J 0 - -
20824 # PLD Partial Line Down \E K - FE - (T)
20825 # PLU Partial Line Up \E L - FE - (U)
20826 # PM Privacy Message \E ^ - Delim -
20827 # PP Preceding Page \E [ Pn V 1 eF -
20828 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20829 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20830 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20831 # PTX Parallel Texts * \E [ \ - - -
20832 # PU1 Private Use 1 \E Q - - -
20833 # PU2 Private Use 2 \E R - - -
20834 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20835 # REP Repeat Char or Control \E [ Pn b 1 - rep
20836 # RI Reverse Index \E M - FE - (V)
20837 # RIS Reset to Initial State \E c - Fs -
20838 # RM Reset Mode * \E [ Ps l - - - (W)
20839 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20840 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20841 # SCI Single-Char Introducer \E Z - - -
20842 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20843 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20844 # SD Scroll Down \E [ Pn T 1 eF rin
20845 # SDS Start Directed String * \E [ Pn ] 1 - -
20846 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20847 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20848 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20849 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20850 # SI Shift In ^O - - - (P)
20851 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20852 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20853 # SLH Set Line Home * \E [ Pn SPC U - - -
20854 # SLL Set Line Limit * \E [ Pn SPC V - - -
20855 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20856 # SM Select Mode \E [ Ps h none - - (W)
20857 # SO Shift Out ^N - - - (Q)
20858 # SOH Start Of Heading * ^A - - -
20859 # SOS Start of String * \E X - - -
20860 # SPA Start of Protected Area \E V - - - (Z)
20861 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20862 # SPH Set Page Home * \E [ Ps SPC G - - -
20863 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20864 # SPL Set Page Limit * \E [ Ps SPC j - - -
20865 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20866 # SR Scroll Right \E [ Pn SPC A 1 eF -
20867 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20868 # SRS Start Reversed String * \E [ Ps [ 0 - -
20869 # SSA Start of Selected Area \E F - - -
20870 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20871 # SSW Set Space Width * \E [ Pn SPC [ none - -
20872 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20873 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20874 # ST String Terminator \E \ - Delim -
20875 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20876 # STS Set Transmit State \E S - - -
20877 # STX Start pf Text * ^B - - -
20878 # SU Scroll Up \E [ Pn S 1 eF indn
20879 # SUB Substitute * ^Z - - -
20880 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20881 # SYN Synchronous Idle * ^F - - -
20882 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20883 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20884 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20885 # TBC Tab Clear \E [ Ps g 0 FE tbc
20886 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20887 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20888 # TSS Thin Space Specification \E [ Pn SC E none FE -
20889 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20890 # VPB Line Position Backward * \E [ Pn k 1 FE -
20891 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20892 # VT Vertical Tabulation * ^K - FE -
20893 # VTS Vertical Tabulation Set \E J - FE -
20895 # ---------------------------------------------------------------------------
20899 # Some control characters are listed in the ECMA-48 standard without
20900 # being assigned functions relevant to terminal control there (they
20901 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20902 # here anyway for completeness.
20904 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20906 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20907 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20908 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20909 # preserved the CHA abbreviation.
20911 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20912 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20913 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20914 # CHT abbreviation.
20916 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20918 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20921 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20922 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20923 # 5 = clear all char tabs, 6 = clear all line tabs.
20925 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20926 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20927 # Position Absolute" but retains the HVP abbreviation.
20929 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20932 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20933 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20934 # DSR, 6 = request CPR response.
20936 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20937 # 1 = clear from beginning, 2 = clear.
20939 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20941 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20943 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20944 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20945 # Position Relative" but retains the HPR abbreviation.
20947 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20950 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20951 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20952 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20953 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20954 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20955 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20956 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20957 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20958 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20959 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20960 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20961 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20962 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20963 # 61-65 = variable highlights for ideograms.
20965 # (P) SI is also called LSO, Locking Shift Zero.
20967 # (Q) SI is also called LS1, Locking Shift One.
20969 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20970 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20971 # Absolute' but retains the VPA abbreviation.
20973 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20974 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20975 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20976 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20977 # 7 = start relay to secondary aux device.
20979 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20982 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20985 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20987 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20988 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20989 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20990 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20991 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20992 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20993 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20994 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20995 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20996 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20997 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20998 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20999 # from ECMA-48's 5th edition but are listed here for reference.
21001 # (X) Select Alternate Presentation Variants is used only for non-Latin
21004 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
21006 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
21009 # ---------------------------------------------------------------------------
21013 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
21014 # X3.64 Control Sequence Introducer is the two characters "Escape ["
21016 # Delim a Delimiter
21018 # x/y identifies a character by position in the ASCII table (column/row)
21020 # eF editor function (see explanation)
21022 # FE format effector (see explanation)
21024 # F is a Final character in
21025 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
21026 # a control sequence (F from 4/0 to 7/14)
21028 # Gs is a graphic character appearing in strings (Gs ranges from
21029 # 2/0 to 7/14) in the ASCII table
21031 # Ce is a control represented as a single bit combination in the C1 set
21032 # of controls in an 8-bit character set
21034 # C0 the familiar set of 7-bit ASCII control characters
21036 # C1 roughly, the set of control chars available only in 8-bit systems.
21037 # This is too complicated to explain fully here, so read Jim Fleming's
21038 # article in the February 1983 BYTE, especially pages 214 through 224.
21040 # Fe is a Final character of a 2-character Escape sequence that has an
21041 # equivalent representation in an 8-bit environment as a Ce-type
21042 # (Fe ranges from 4/0 to 5/15)
21044 # Fs is a Final character of a 2-character Escape sequence that is
21045 # standardized internationally with identical representation in 7-bit
21046 # and 8-bit environments and is independent of the currently
21047 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21049 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21052 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21055 # Pn is a numeric parameter in a control sequence, a string of zero or
21056 # more characters ranging from 3/0 to 3/9 in the ASCII table
21058 # Ps is a variable number of selective parameters in a control sequence
21059 # with each selective parameter separated from the other by the code
21060 # 3/11 (which usually represents a semicolon); Ps ranges from
21061 # 3/0 to 3/9 and includes 3/11
21063 # * Not relevant to terminal control, listed for completeness only.
21065 # Format Effectors versus Editor Functions
21067 # A format effector specifies how following output is to be displayed.
21068 # An editor function allows you to modify the display. Informally
21069 # format effectors may be destructive; format effectors should not be.
21071 # For instance, a format effector that moves the "active position" (the
21072 # cursor or equivalent) one space to the left would be useful when you want to
21073 # create an overstrike, a compound character made of two standard characters
21074 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21075 # format effector, so you can do this. But many systems use it in a
21076 # nonstandard fashion, as an editor function, deleting the character to the
21077 # left of the cursor and moving the cursor left. When Control-H is assumed to
21078 # be an editor function, you cannot predict whether its use will create an
21079 # overstrike unless you also know whether the output device is in an "insert
21080 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21081 # its effect can always be predicted. The familiar characters carriage
21082 # return, linefeed, formfeed, etc., are defined as format effectors.
21084 # NOTES ON THE DEC VT100 IMPLEMENTATION
21086 # Control sequences implemented in the VT100 are as follows:
21088 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21089 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21091 # plus several private DEC commands.
21093 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21095 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21096 # Erase from beginning of line to cursor Esc [ 1 K
21097 # Erase line containing cursor Esc [ 2 K
21098 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21099 # Erase from beginning of screen to cursor Esc [ 1 J
21100 # Erase entire screen Esc [ 2 J
21102 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21103 # Esc [ 2 J, but this is wrong; the default is 0.
21105 # The VT100 responds to receiving the DA (Device Attributes) control
21107 # Esc [ c (or Esc [ 0 c)
21109 # by transmitting the sequence
21113 # where Ps is a character that describes installed options.
21115 # The VT100's cursor location can be read with the DSR (Device Status
21120 # The VT100 reports by transmitting the CPR sequence
21124 # where Pl is the line number and Pc is the column number (in decimal).
21126 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21130 # Here is a description of the color and attribute controls supported in the
21131 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21132 # terminal emulators for Intel boxes obey these. They are a proper subset
21133 # of the ECMA-48 escapes.
21135 # 0 all attributes off
21136 # 1 foreground bright
21138 # 5 blink on/background bright (not reliable with brown)
21140 # 8 set blank (non-display)
21141 # 10 set primary font
21142 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21143 # 12 set second alternate font (on PCs, display IBM high-half chars)
21145 # Color attribute sets
21146 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21147 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21148 # Bright black becomes gray. Bright brown becomes yellow,
21149 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21151 # * If the 5 attribute is on and you set a background color (40-47) it is
21152 # supposed to enable bright background.
21154 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21155 # when you try to set a "bright brown" (yellow) background with attribute
21156 # 5 (you get a blinking yellow foreground instead). A few displays
21157 # (including the System V console) support an attribute 6 that undoes this
21158 # braindamage (this is required by iBCS2).
21160 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21161 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21164 #### Intel Binary Compatibility Standard
21166 # For comparison, here are the capabilities implied by the Intel Binary
21167 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21168 # These recommendations are optional. IBCS2 allows the leading escape to
21169 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21170 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21171 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21172 # terminfo entry are followed with the corresponding capability in parens:
21174 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21175 # CSI 2h lock keyboard
21176 # CSI 2i send screen as input
21177 # CSI 2l unlock keyboard
21178 # CSI 6m enable background color intensity
21179 # CSI <0-2>c reserved
21180 # CSI <0-59>m select graphic rendition
21181 # CSI <n>;<m>H (cup) cursor to line n and column m
21182 # CSI <n>;<m>f cursor to line n and column m
21183 # CSI <n>@ (ich) insert characters
21184 # CSI <n>A (cuu) cursor up n lines
21185 # CSI <n>B (cud) cursor down n lines
21186 # CSI <n>C (cuu) cursor right n characters
21187 # CSI <n>D (cud) cursor left n characters
21188 # CSI <n>E cursor down n lines and in first column
21189 # CSI <n>F cursor up n lines and in first column
21190 # CSI <n>G (hpa) position cursor at column n-1
21191 # CSI <n>J (ed) erase in display
21192 # CSI <n>K (el) erase in line
21193 # CSI <n>L (il) insert line(s)
21194 # CSI <n>P (dch) delete characters
21195 # CSI <n>S (indn) scroll up n lines
21196 # CSI <n>T (rin) scroll down n lines
21197 # CSI <n>X (ech) erase characters
21198 # CSI <n>Z (cbt) back up n tab stops
21199 # CSI <n>` cursor to column n on line
21200 # CSI <n>a (cuu) cursor right n characters
21201 # CSI <n>d (vpa) cursor to line n
21202 # CSI <n>e cursor down n lines and in first column
21203 # CSI <n>g (cbt) clear all tabs
21204 # CSI <n>z make virtual terminal n active
21205 # CSI ?7h (smam) turn automargin on
21206 # CSI ?7l (rmam) turn automargin off
21207 # CSI s save cursor position
21208 # CSI u restore cursor position to saved value
21209 # CSI =<c>A set overscan color
21210 # CSI =<c>F set normal foreground color
21211 # CSI =<c>G set normal background color
21212 # CSI =<c>H set reverse foreground color
21213 # CSI =<c>I set reverse foreground color
21214 # CSI =<c>J set graphic foreground color
21215 # CSI =<c>K set graphic foreground color
21216 # CSI =<n>g (dispc) display n from alternate graphics character set
21217 # CSI =<p>;<d>B set bell parameters
21218 # CSI =<s>;<e>C set cursor parameters
21219 # CSI =<x>D enable/disable intensity of background color
21220 # CSI =<x>E set/clear blink vs. bold background
21221 # CSI 7 (sc) (sc) save cursor position
21222 # CSI 8 (rc) (rc) restore cursor position to saved value
21223 # CSI H (hts) (hts) set tab stop
21224 # CSI Q<n><string> define function key string
21225 # (string must begin and end with delimiter char)
21226 # CSI c (clear) clear screen
21228 # The lack of any specification for attributes in SGR (among other things)
21229 # makes this a wretchedly weak standard. The table above is literally
21230 # everything iBSC2 has to say about terminal escape sequences; there is
21231 # no further discussion of their meaning or how to set the parameters
21232 # in these sequences at all.
21235 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21237 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21238 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21239 # with the extension names chosen for compatibility with the termcap names
21240 # assigned in System V terminfo. There are some variant extension sets out
21241 # there. We try to describe them here.
21243 # XENIX extensions:
21245 # The XENIX extensions include a set of function-key capabilities as follows:
21247 # code XENIX variable name terminfo name name clashes?
21248 # ---- ------------------- ------------- -----------------------
21250 # CR key_char_right
21251 # CW key_change_window create_window
21253 # HM key_home khome
21255 # LD key_delete_line kdl1
21256 # LF key_linefeed label_off
21257 # NU key_next_unlocked_cell
21258 # PD key_page_down knp
21260 # PN start_print mc5
21262 # PS stop_print mc4
21263 # PU key_page_up kpp pulse
21264 # RC key_recalc remove_clock
21265 # RF key_toggle_ref req_for_input
21266 # RT key_return kent
21267 # UP key_up_arrow kcuu1 parm_up_cursor
21269 # WR key_word_right
21271 # The XENIX extensions also include the following character-set and highlight
21274 # XENIX terminfo function
21275 # ----- -------- ------------------------------
21276 # GS smacs start alternate character set
21277 # GE rmacs end alternate character set
21278 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21279 # bo blink begin blink (not used in /etc/termcap)
21280 # be end blink (not used in /etc/termcap)
21281 # bb blink glitch (not used in /etc/termcap)
21282 # it dim begin dim (not used in /etc/termcap)
21283 # ie end dim (not used in /etc/termcap)
21284 # ig dim glitch (not used in /etc/termcap)
21286 # Finally, XENIX also used the following forms-drawing capabilities:
21288 # single double type ASCII approximation
21289 # ------ ------ ------------- -------------------
21290 # GV Gv vertical line |
21291 # GH Gv horizontal line - _
21292 # G1 G5 top right corner _ |
21293 # G2 G6 top left corner |
21294 # G3 G7 bottom left corner |_
21295 # G4 G8 bottom right corner _|
21296 # GD Gd down-tick character T
21297 # GL Gl left-tick character -|
21298 # GR Gr right-tick character |-
21299 # GC Gc middle intersection -|-
21300 # GU Gu up-tick character _|_
21302 # These were invented to take advantage of the IBM PC ROM character set. One
21303 # can compose an acsc string from the single-width characters as follows
21304 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21305 # When translating a termcap file, ncurses tic will do this automatically.
21306 # The double forms characters don't fit the SVr4 terminfo model.
21310 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21311 # nonstandard capabilities. Its signature is the KM capability, used to name
21312 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21313 # set. Comments in the original, and a little cross-checking with other AT&T
21314 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21315 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21316 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21317 # cursor invisible), and CV=:ve: (make cursor normal).
21321 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21322 # have the System V capabilities up to SVr1 level. After that, it supports
21323 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21324 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21325 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21326 # HP binary format incompatible with SVr4's.
21330 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21331 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21332 # capabilities following prtr_non with the following special capabilties:
21333 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21334 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21335 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21336 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21337 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21338 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21339 # correspond to acsc chars, here is the mapping:
21341 # box1[0] = ACS_ULCORNER
21342 # box1[1] = ACS_HLINE
21343 # box1[2] = ACS_URCORNER
21344 # box1[3] = ACS_VLINE
21345 # box1[4] = ACS_LRCORNER
21346 # box1[5] = ACS_LLCORNER
21347 # box1[6] = ACS_TTEE
21348 # box1[7] = ACS_RTEE
21349 # box1[8] = ACS_BTEE
21350 # box1[9] = ACS_LTEE
21351 # box1[10] = ACS_PLUS
21353 # The box2 characters are the double-line versions of these forms graphics.
21354 # The AIX binary terminfo format is incompatible with SVr4's.
21356 # Iris console extensions:
21358 # HS is half-intensity start; HE is half-intensity end
21359 # CT is color terminal type (for Curses & rogue)
21360 # CP is color change escape sequence
21361 # CZ are color names (for Curses & rogue)
21363 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21367 # There is a set of extended termcaps associated with something
21368 # called the "Terminal Control" or TC package created by MainStream Systems,
21369 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21370 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21371 # that flags color terminals.
21373 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21374 # infocmp to manipulate user-definable capabilities. Those that are intended
21375 # for use in either terminfo or termcap use 2-character names. Extended
21376 # function keys do not use 2-character names, and are available only with
21379 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21380 # supports this extension; termcap libraries can as noted above make limited
21381 # use of the feature.
21383 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21386 # SCREEN Extensions:
21388 # The screen program uses the termcap interface. It recognizes a few useful
21389 # nonstandard capabilities. Those are used in this file.
21391 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21393 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21394 # E0 (str) Switch charset 'G0' back to standard charset.
21395 # S0 (str) Switch charset 'G0' to the specified charset.
21396 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
21399 # AX is relatively straightforward; it is interpreted by ncurses to say that
21400 # SGR 39/49 reset the terminal's foreground and background colors to their
21403 # XT is harder, since screen's manpage does not give more details. For that,
21404 # we must read screen's source-code. When XT is set, screen assumes
21406 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
21407 # screen may also set the terminal's name, which is (for xterm) distinct
21408 # from the icon name.
21409 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
21410 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
21411 # this is an rxvt feature.
21412 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
21413 # These are from xterm, although xterm accepts mouse codes that may not be
21414 # recognized by screen, e.g., 1005, 1006.
21415 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
21416 # sequence. However, because screen uses only termcap, the values returned
21417 # by Af/Ab are not usable because they rely on expressions that termcap
21418 # does not support. Therefore, screen uses a hardcoded string to work
21419 # around the limitation.
21420 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
21422 # The other ISO-2022 features are rarely used, but provided here to make
21423 # screen's termcap features available.
21425 # XTERM Extensions:
21427 # Most of the xterm extensions are for function-keys. Since patch #94 (in
21428 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
21429 # additional function-key strings. Some other developers copied the feature,
21430 # though they did not follow xterm's lead in patch #167 (in 2002), to make
21431 # these key definitions less ambiguous.
21433 # A few terminals provide similar functionality (sending distinct keys when
21434 # a modifier is used), including rxvt.
21436 # These are the extended keys defined in this file:
21438 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
21439 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
21440 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
21441 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
21443 # Here are the other xterm-related extensions which are used in this file:
21445 # Cr is a string capability which resets the cursor color
21446 # Cs is a string capability which sets the cursor color to a given value.
21447 # The single string parameter is the color name/number, according to the
21449 # Ms modifies the selection/clipboard. Its parameters are
21450 # p1 = the storage unit (clipboard, selection or cut buffer)
21451 # p2 = the base64-encoded clipboard content.
21452 # Se resets the cursor style to the terminal power-on default.
21453 # Ss is a string capability with one numeric parameter. It is used to set the
21454 # cursor style as described by the DECSCUSR function to a block or
21456 # XM is a string capability which overrides ncurses's built-in string which
21457 # enables xterm mouse mode.
21459 # Miscellaneous extensions:
21461 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
21462 # This was implemented for the Hurd.
21463 # E3 clears the terminal's scrollback buffer. This was implemented in the
21464 # Linux 3.0 kernel as a security feature. It matches a feature which was
21465 # added in xterm patch #107.
21466 # U8 is a numeric capability which denotes a terminal emulator which does not
21467 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
21468 # value to enable it.
21470 ######## CHANGE HISTORY
21472 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21473 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21474 # maintained by Eric S. Raymond as part of the ncurses project.
21476 # This file contains all the capability information present in John Kunze's
21477 # last version of the termcap master file, except as noted in the change
21478 # comments at end of file. Some information about very ancient obsolete
21479 # capabilities has been moved to comments. Some all-numeric names of older
21480 # terminals have been retired.
21482 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21483 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21484 # used by BSD curses.
21486 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21487 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21488 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21489 # making perfectly synchronized mistakes which I then failed to catch by
21490 # eyeball, the translation was correct and perfectly information-preserving.
21492 # Major version number bumps correspond to major version changes in ncurses.
21494 # Here is a log of the changes since then:
21496 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21497 # * First terminfo master translated from 8.3.
21498 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21499 # * Replaced Wyse entries with updated entries supplied by vendor.
21501 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21502 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21503 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21504 # * Better XENIX keycap translation. Describe TC termcaps.
21505 # * Contact and history info supplied by Qume.
21506 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21507 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21508 # * Added information on X3.64 and VT100 standard escape sequences.
21509 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21510 # * Added a correct X11R6 xterm entry.
21511 # * Fixed terminfo translations of padding.
21512 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21513 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21514 # * Added u6/u7/u8/u9 capabilities.
21515 # * Added PCVT entry.
21516 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21517 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21518 # to use reverse-video standout so Emacs will look right.
21519 # * Added el1 capability to ansi.
21520 # * Added smacs/rmacs to ansi.sys.
21522 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21523 # * New mt70 entry.
21524 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21525 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21526 # smartvid & smarterm, ampex 175 & 219 & 232,
21527 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21528 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21529 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21530 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21531 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21532 # * Restored the old minimal-ansi entry, luna needs it.
21533 # * Fixed some incorrect ip and proportional-padding translations.
21534 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21535 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21536 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21537 # to force a particular height.
21538 # * Added beehive4 and reorganized other Harris entries.
21539 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21540 # * Merged in DEC's official entries for its terminals. The only old
21541 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21542 # * Replaced the translated BBN Bitgraph entries with purpose-built
21543 # ones from AT&T's SVr3.
21544 # * Replaced the AT&T entries with AT&T's official terminfos.
21545 # * Added teleray 16, vc415, cops10.
21546 # * Merged in many individual capabilities from SCO terminfo files.
21547 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21549 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21550 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21551 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21552 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21553 # simterm, citoh and variants.
21554 # * Replaced sol entry with sol1 and sol2.
21555 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21556 # terminfo entries.
21557 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21558 # and dg200 entries using caps from from SCO.
21559 # * Added the usual set of function-key mappings to ANSI entry.
21560 # * Corrected xterm's function-key capabilities.
21561 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21562 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21563 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21564 # * Fix in xterm entry, get the arrow keys right.
21565 # * Change some \0 escapes to \200.
21566 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21567 # * Added apple (Videx card), adm1a, oadm31.
21568 # * Fixed malformed ampex csr.
21569 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21570 # * Changed mandatory to advisory padding in many entries.
21571 # * Replaced HP entries up to hpsub with purpose-built ones.
21572 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21573 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21574 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21575 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21576 # more efficient (but the entries otherwise identical).
21577 # * Added dg211 from Shuford archive.
21578 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21579 # adm42-nl, pc52, gs6300, xerox820, uts30.
21580 # * Pull SCO's padding into vi200 entry.
21581 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21582 # entries merged in from SCO's descriptions.
21583 # * Fixed old-style prefix padding on zen50, h1500.
21584 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21585 # entry from SCO's description.
21586 # * Reorganized the special entries.
21587 # * Added lm#0 to cbunix and virtual entries.
21589 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21590 # * Restored cdc456tst.
21591 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21592 # * Added megatek, beacon, microkit.
21593 # * Freeze for ncurses-1.9 release.
21594 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21595 # * Added historical data for TAB.
21596 # * Comment fixes from David MacKenzie.
21597 # * Added the new BSDI pc3 entry.
21598 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21599 # * A change in the tic -C logic now ensures that all entries in
21600 # the termcap translation will fit in < 1024 bytes.
21601 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21602 # from GNU termcap file. This merges in all their local information.
21603 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21604 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21605 # * Added warnings about entries with long translations (restoring
21606 # all the GNU termcaps pushes a few over the edge).
21607 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21608 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21609 # number of long (> 1024) termcap translations back to 0.
21611 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21612 # * Added kf13-kf20 to Linux entry.
21613 # * Regularize Prime terminal names.
21614 # * Historical data on Synertek.
21615 # * Freeze for ncurses-1.9.1.
21616 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21617 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21618 # * Eliminate whitespace in short name fields, this tanks some scripts.
21619 # * Name field changes to shorten some long entries.
21620 # * Termcap translation now automatically generates empty rmir/smir
21621 # when ich1/ich is present (copes with an ancient vi bug).
21622 # * Added `screen' entries from FSF's screen-3.6.2.
21623 # * Added linux-nic and xterm-nic entries.
21624 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21625 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21626 # eliminating some special-case code in ncurses.
21628 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21629 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21630 # that captures everything unique from it.
21631 # * Added reorder script generator.
21632 # * Freeze for ncurses 1.9.2 release.
21633 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21634 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21635 # * Added Olaf Siebert's corrections for adm12.
21636 # * ansi-pc-color now includes the colors and pairs caps, so that
21637 # entries which use it will inherit them automatically.
21638 # * The linux entry can now recognize the center (keypad 5) key.
21639 # * Removed some junk that found its way into Linux acsc.
21641 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21642 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21643 # * xterm doesn't try to use application keypad mode any more.
21644 # * Freeze for ncurses-1.9.3 release.
21645 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21646 # * Added corrected sun entry from vendor.
21647 # * Added csr capability to linux entry.
21648 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21649 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21650 # * Some commented-out caps in long entries come back in, my code
21651 # for computing string-table lengths had a bug in it.
21652 # * pcansi series modified to fit comm-program reality better.
21653 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
21654 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
21655 # * Correct some bad aliases in the pcansi series
21656 # * Added entry for QNX console.
21657 # * Clean up duplicate long names for use with 4.4 library.
21658 # * Change vt100 standout to be normal reverse vide, not bright reverse;
21659 # this makes the Emacs status line look better.
21660 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
21661 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
21662 # * Minor surgery, mostly on name strings, to shorten termcap version.
21664 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
21665 # * Added dec-vt100 for use with the EWAN emulator.
21666 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21667 # * Freeze for 1.9.5 alpha release.
21668 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
21669 # * Changed xterm lines to 24, the X11R6 default.
21670 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
21671 # * Added 7 newly discovered, undocumented acsc characters to linux
21672 # entry (the pryz{|} characters).
21673 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
21674 # * Correct two typos in the xterm entries introduced in 9.9.1.
21675 # * I finally figured out how to translate ko capabilities. Done.
21676 # * Added tvi921 entries from Tim Theisen.
21677 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
21678 # * Removed mystery tec entry, it was neither interesting nor useful.
21679 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
21680 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
21681 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
21682 # by making them relative to use capabilities
21683 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
21684 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
21685 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
21687 # * Translate all home=\E[;H capabilities to home=\E[H, they're
21689 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
21690 # vt100 and ANSI-like terminals.
21691 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
21692 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
21693 # does this now, too.
21694 # * fviewpoint is gone, it duplicated screwpoint.
21695 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
21696 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
21697 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
21698 # The UW vi50 replaces the old one, which becomes vi50adm,
21699 # * No more embedded commas in name fields.
21701 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
21702 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
21703 # * Introduced klone+* entries for describing Intel-console behavior.
21704 # * Linux kbs is default-mapped to delete for some brain-dead reason.
21705 # * -nsl -> -ns. The -pp syntax is obsolete.
21706 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
21707 # * Make xterm entry do application-keypad mode again. I got complaints
21708 # that it was messing up someone's 3270 emulator.
21709 # * Added some longname fields in order to avoid warning messages from
21710 # older tic implementations.
21711 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
21712 # it! (This gives us pi, greater than, less than, and a few more.)
21713 # * Freeze for ncurses-1.9.6 release.
21714 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
21715 # * Add xon to a number of console entries, they're memory-mapped and
21716 # don't need padding.
21717 # * Correct the use dependencies in the ansi series.
21718 # * Hand-translate more XENIX capabilities.
21719 # * Added hpterm entry for HP's X terminal emulator.
21720 # * Added aixterm entries.
21721 # * Shortened four names so everything fits in 14 chars.
21723 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
21724 # * Added ibcs2 entry and info on iBCS2 standard.
21725 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
21726 # * We can handle the HP meml/memu capability now.
21727 # * Added smacs to klone entries, just as documentation.
21728 # * Carrected ansi.sys and cit-500 entries.
21729 # * Added z39, vt320-k311, v220c, and avatar entries.
21730 # * Make pcansi use the ansi.sys invis capability.
21731 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
21732 # tvi925, tvi950, dt80, ncr7900i, h19.
21733 # * X3.64 has been withdrawn, change some references.
21734 # * Removed function keys from ansi-m entry.
21735 # * Corrected ansi.sys entry.
21736 # * Freeze for ncurses-1.9.7 release.
21737 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
21738 # * Added rmam/smam capabilities to many entries based on init strings.
21739 # * Added correct hpa/vpa to linux.
21740 # * Reduced several entries relative to vt52.
21741 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
21742 # * Exiled some utterly unidentifiable custom and homebrew types to the
21743 # UFO file; also, obsolete small-screen hardware; also, entries which
21744 # look flat-out incorrect, garbled, or redundant. These include the
21745 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
21746 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
21747 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
21748 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
21749 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
21750 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
21751 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
21752 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
21753 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
21754 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
21755 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
21756 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
21757 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
21758 # * Corrected pcvt25h as suggested by Brian C. Grayson
21759 # <bgrayson@pine.ece.utexas.edu>.
21760 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
21761 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
21762 # * Added kent=\EOM to xterm entry.
21764 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
21765 # * Corrected gigi entry.
21766 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
21767 # bad hpa/vpa capabilities.
21768 # * Corrected flash strings to have a uniform delay of .2 sec. No
21769 # more speed-dependent NUL-padding!
21770 # * terminfo capabilities in comments bracketed with <>.
21771 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
21772 # * Replaced pcvt with the 3.31 pcvt entries.
21773 # * Freeze for 1.9.7a.
21774 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
21775 # * Added emu entry from the X11R6 contrib tape sources.
21777 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
21778 # * Improved iris-ansi and sun entries.
21779 # * More flash string improvements.
21780 # * Corrected wy160 & wy160 as suggested by Robert Dunn
21781 # * Added dim to at386.
21782 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
21783 # he's ready to start using the termcap generated from this one.
21784 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
21785 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
21786 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
21787 # att610, att620, att630,
21788 # * Changed hazeltine name prefix from h to hz.
21789 # * Sent t500 to the UFI file.
21790 # * I think we've sucked all the juice out of BSDI's termcap file now.
21791 # * Freeze for ncurses 1.9.8 release
21792 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
21793 # * Unfreeze, linux kbs needed to be fixed.
21794 # * Tim Theisen pinned down a bug in the DMD firmware.
21795 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
21796 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
21797 # (The broken ones had been shadowed by sgr.)
21798 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
21799 # * Added documentation on ECMA-48 standard.
21800 # * New Amiga entry.
21801 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
21802 # * More ECMA-48 stuff
21803 # * Corrected typo in minix entry, added pc-minix.
21804 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
21805 # * Added rxvt entry.
21806 # * Added 1.3.x color-change capabilities to linux entry.
21807 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
21808 # * Corrected rxvt entry khome/kend.
21809 # * Corrected linux color change capabilities.
21810 # * NeXT entries from Dave Wetzel.
21811 # * Cleaned up if and rf file names (all in /usr/share now).
21812 # * Changed linux op capability to avoid screwing up a background color
21813 # pair set by setterm.
21814 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
21815 # * Added xterm-sun.
21816 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
21819 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
21820 # * Another sweep through the Shuford archive looking for new info.
21821 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
21822 # * Added st52 from Per Persson.
21823 # * Added eterm from the GNU Emacs 19.30 distribution.
21824 # * Freeze for 1.9.9.
21825 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
21826 # * FreeBSD console entries from Andrew Chernov.
21827 # * Removed duplicate Atari st52 name.
21828 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
21829 # * xterm doesn't actually have ACS_BLOCK.
21830 # * Change klone+color setf/setb to simpler forms that can be
21831 # translated into termcap.
21833 # * Removed mechanically-generated junk capabilities from cons* entries.
21834 # * Added color support to bsdos.
21835 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
21836 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
21837 # * Created ecma+color, linux can use it. Also added ech to linux.
21838 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
21839 # * Add descriptions to FreeBSD console entries. Also shorten
21840 # some aliases to <= 14 chars for portability.
21841 # * Added x68k console
21842 # * Added OTbs to several VT-series entries.
21843 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
21844 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21845 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
21846 # * kterm correction due to Kenji Rikitake.
21847 # * ACS correction in vt320-kll due to Phillippe De Muyter.
21848 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
21849 # * Sun console entry correction from J.T. Conklin.
21850 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21851 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
21852 # * Added smul to linux entry (we never noticed it was missing
21853 # because of sgr!).
21854 # * Added rmln to hp+labels (deduced from other HP entries).
21855 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
21856 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
21857 # * Corrected vt220 acsc.
21858 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21859 # this corresponds to reality and helps prevent some tic warnings.
21860 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
21861 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
21862 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
21863 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
21864 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
21865 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
21866 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
21867 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
21868 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
21869 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
21870 # ifmr, v3220, wy100q, tandem653, ibmaed.
21871 # * Added DWK terminal description.
21872 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
21873 # * Many entries now have highlights inherited from adm+sgr.
21874 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
21875 # * xtitle and xtitle-twm enable access to the X status line.
21876 # * Added linux-1.3.6 color palette caps in conventional format.
21877 # * Added adm1178 terminal.
21878 # * Move fos and apollo terminals to obsolete category.
21879 # * Aha! The BRL terminals file told us what the Iris extensions mean.
21880 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
21881 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
21883 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
21884 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
21885 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
21886 # * Corrected, from BRL termcap file: vi50.
21887 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
21888 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
21889 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
21890 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
21891 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
21892 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
21893 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
21894 # * Paired-attribute fixes to various terminals.
21895 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
21896 # * xterm entry corrections from Thomas Dickey.
21897 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
21898 # * Added t916 entry, translated from a termcap in SCO's support area.
21899 # * New qnx entry from Michael Hunter.
21900 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
21901 # * Added hpex2 from Ville Sulko.
21902 # * Fixed a bug that ran the qnx and pcvtXX together.
21903 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
21904 # * Added dtterm entry from Solaris CDE.
21905 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
21906 # * corrected pairs#8 typo in dtterm entry.
21908 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21909 # * updated xterm entry to cover 3.1.2E's new features.
21910 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21911 # * Added new minix entry
21912 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21913 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21914 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21915 # * Added Prism entries and kt7ix.
21916 # * Caution notes about EWAN and tabset files.
21917 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21918 # * Added acsc/rmacs/smacs to vt52.
21919 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21920 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21921 # added technical corrections to avoid warning messages.
21922 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21923 # * Added rmso=\E[27m in Linux entry.
21924 # * Added koi8-r support for Linux console.
21925 # * Replace xterm entries with canonical ones from XFree86 3.2.
21926 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21927 # * Added color_xterm from Jacob Mandelson
21928 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21929 # * Back off the xterm entry to use r6 as a base.
21930 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21931 # * Added dec-vt220 at Adrian Garside's request.
21933 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21935 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21936 # * Minor corrections to xterm entries.
21937 # * Replaced EWAN telnet entry.
21938 # * Dropped the reorder script generator. It was a fossil.
21939 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21940 # * Replaced minitel-2 entry.
21941 # * Added MGR, ansi-nt.
21942 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21943 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21944 # the 4.4BSD Lite2 file.
21946 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21947 # * Use setaf/setab consistently with SVr4.
21948 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21949 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21950 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21951 # * add xterm-16color, for XFree86 3.3
21952 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21953 # * correct typo in emu
21954 # * correct typo in vt102-w (Robert Wuest)
21955 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21956 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21957 # * remove ech capability from rxvt (it does the wrong thing)
21958 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21959 # * remove spurious newlines from several entries (hp+color, wy50,
21960 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21962 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21963 # * correct rmso capability of wy50-mc
21964 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21965 # * add cbt to xterm-xf86-v32
21966 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21967 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21968 # other capabilities not in xterm-r6.
21969 # * remove alternate character set from kterm entry.
21970 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21971 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21972 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21973 # * add xterm-8bit entry.
21974 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21975 # * repair several places where early version of tic replaced \, with \\\,
21976 # * make acsc entries canonical form (sorted, uniq).
21977 # * modify acsc entries for linux, linux-koi8
21978 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21979 # * add color, mouse support to kterm.
21980 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21981 # * correct wy120 smxon/tbc capabilities which were stuck together.
21982 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21983 # * add entry for xterm-xf86-v39t
21984 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21985 # * add u8,u9 to sun-il description
21986 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21987 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21989 # * add hds200 description (Walter Skorski)
21990 # * add EMX 0.9b descriptions
21991 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21992 # * rename xhpterm back to hpterm.
21993 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21994 # * change initc in linux-c-nc to use 0..1000 range.
21995 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21996 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21997 # * add sgr0 for rxvt.
21998 # * remove bogus smacs/rmacs from EMX descriptions.
21999 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
22000 # * revised entry for att7300
22001 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
22002 # * use \0 rather than \200.
22003 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
22004 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
22005 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
22006 # * rename xterm-xf86-v39t to xterm-xf86-v40
22007 # * remove bold/underline from sun console entries since they're not
22009 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
22010 # * add beterm entry (Fred Fish)
22011 # * add irix-color/xwsh entry.
22012 # * turn ncv off for linux.
22013 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
22014 # * set ncv for FreeBSD console (treat colors with reverse specially).
22015 # * remove sgr string from qnx based on report by Xiaodan Tang
22016 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
22017 # * remove spurious commas from descriptions
22018 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
22019 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
22020 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22021 # apparently based on cp-866).
22023 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
22025 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22026 # * Replaced minitel-2 entry.
22027 # * Added MGR, ansi-nt.
22028 # * Minor corrections to xterm entries.
22029 # * Replaced EWAN telnet entry.
22030 # * Dropped the reorder script generator. It was a fossil.
22031 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22032 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22033 # the 4.4BSD Lite2 file.
22034 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
22035 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
22036 # * Updated iris-ansi; corrected vt102-w.
22037 # * Switch base xterm entry to 3.3 level.
22038 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
22040 # * Removed rmir/smir from tv92B.
22042 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
22043 # * add hds200 description (Walter Skorski)
22044 # * add beterm entry (Fred Fish)
22045 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
22046 # iris-color entries.
22047 # * add emx entries.
22048 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22049 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22051 # * remove sgr string from qnx based on report by Xiaodan Tang
22052 # * Added u8/u9, removed rmul/smul from sun-il.
22053 # * 4.2 tic displays \0 rather than \200.
22054 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22055 # apparently based on cp-866).
22056 # * Merged in Pavel Roskin's acsc for linux-koi8
22057 # * Corrected some erroneous \\'s to \.
22058 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22059 # * II -> ii in pcvtXX, screen, xterm.
22060 # * Removed \n chars following ANSI escapes in sgr & friends.
22061 # * Updated Wyse entries.
22062 # * h19 corrections from Tim Pierce.
22063 # * Noted that the dm2500 has both ich and smir.
22064 # * added pccons for the Alpha under OSF/1.
22065 # * Added Sony NEWS workstation entries and cit101e-rv.
22066 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22067 # the Verkuil entry messes up with Amiga Telnet.
22068 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22069 # * Corrected attributions in 10.2.0 release notes.
22070 # * Scanned the Shuford archive for new terminfos and information.
22071 # * Removed sgr from qnx entry (Thomas Dickey).
22072 # * Added entries for ICL and Kokusai Data Systems terminals.
22073 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22074 # * Incorporated att700 from the Boundless Technology FTP site.
22075 # * Miscellaneous contact-address and Web-page updates.
22077 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22080 # * add nxterm and xterm-color terminfo description (request by Cristian
22081 # Gafton <gafton@redhat.com>).
22082 # * modify rxvt terminfo description to clear alternate screen before
22083 # switching back to normal screen, for compatibility with applications
22084 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22085 # * modify linux terminfo description to reset color palette (reported
22086 # by Telford Tendys <telford@eng.uts.edu.au>).
22089 # * merge changes from current XFree86 xterm terminfo descriptions.
22092 # * Added minitel1 entries from Alexander Montaron.
22093 # * Added qnxt2 from Federico Bianchi.
22094 # * Added arm100 terminfo entries from Dave Millen.
22097 # * Added ncsa telnet entries from Francesco Potorti
22100 # * modify ncsa telnet entry to reflect color, other capabilities based on
22101 # examination of the source code - T.Dickey.
22104 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22107 # * Added Francesco Potorti's tuned Wyse 99 entries.
22108 # * dtterm enacs correction from Alexander V. Lukyanov.
22109 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22110 # * correct a typo in icl6404 entry.
22111 # * add xtermm and xtermc
22114 # * format most %'char' sequences to %{number}
22115 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22116 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22119 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22120 # * correct initialization string in xterm-r5, add misc other features
22121 # to correspond with xterm patch 84 - TD
22124 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22125 # * add Mathew Vernon's mach console entries
22126 # * corrections for ncsa function-keys (report by Larry Virden)
22129 # * change linux to use ncv#2, since underline does not work with color - TD
22132 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22133 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22134 # application modes, change kent to use the correct keypad code - TD
22137 # * add entry for Tera Term - TD
22140 # * minor improvements for teraterm entry - TD
22141 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22142 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22145 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22146 # xterm and ncsa entries by removing the unneeded ones. Note that
22147 # some entries will return kend & khome versus kslt and kfnd, for
22148 # PC-style keyboards versus strict vt220 compatiblity - TD
22151 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22153 # * add 'crt' entry - TD
22154 # * correct typos in 'linux-c' entry - TD
22157 # * update entries for BSD/OS console to use klone+sgr and klone+color
22158 # (Jeffrey C Honig)
22161 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22164 # * add linux-lat, from RedHat patches to ncurses 4.2
22167 # * add complete set of default function-key definitions for scoansi - TD.
22170 # * add cnorm, cvvis for Linux 2.2 kernels
22173 # * add kmous to xterm-r5 -TD
22174 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22175 # parent "use" clause -TD
22178 # * corrected cnorm, added el1 in 'screen' description -TD
22181 # * add ms-vt100 -TD
22184 # * corrections to beterm entry -TD
22187 # * add cygwin entry -TD
22190 # * minor corrections for beterm entry -TD
22193 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22196 # * add amiga-8bit entry
22197 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22198 # rcons-color, based on
22199 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22200 # * add alias for iris-ansi-net
22203 # * corrected scoansi entry's acsc, some function keys, add color -TD
22206 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22207 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22208 # key mapping, leaving Potorti's entries more like he named them -TD
22209 # * remove enter/exit am-mode from cygwin -TD
22212 # * correct typos in several entries (missing '[' from CSI):
22213 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22214 # strings for avt-ns -TD
22215 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22218 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22219 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22220 # * add xterm-88color and xterm-256color -TD
22223 # * add "obsolete" termcap strings -TD
22224 # * add kvt and gnome entries -TD
22227 # * correct cup string for regent100 -TD
22230 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22231 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22232 # * change OTrs capabilities to rs2 -TD
22233 # * add obsolete and extended capabilities to 'screen' -TD
22236 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22238 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22239 # and adding kcbt -TD
22242 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22243 # nonstandard resource settings -TD
22246 # * minor fixes for xterm-*, based on Debian #58530 -TD
22249 # * add several terminal types from esr's "11.0", as well as comments.
22250 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22251 # vt220-8bit, vt220-old, wy85-8bit
22254 # * add several terminal types from esr's "11.0.1" (ansi-*).
22255 # * update OTxx capabilities for changes on 2000/3/4.
22256 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22259 # * move screen's AX extension to ecma+color, modify several entries to
22260 # use that, adjusting ncv as needed -TD
22263 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22264 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22265 # in esr's version.
22268 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22269 # * correct color definition for ibm3164, make minor changes to other
22270 # IBM terminal definitions based on recent terminfo descriptions -TD
22273 # * add mgterm, from NetBSD -TD
22274 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22275 # * change cons25w to use rs2 for reset rather than rs1 -TD
22276 # * add rc/sc to aixterm based on manpage -TD
22279 # * remove ncv from xterm-16color, xterm-256color
22282 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22285 # * add Eterm (Michael Jennings)
22288 # * add amiga-vnc entry.
22291 # * correct description of Top Gun Telnet.
22292 # * add kterm-color
22295 # * add qansi* entries from QNX ftp site.
22298 # * add Matrix Orbital entries by Eric Z. Ayers).
22299 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22303 # * add S0, E0 extensions to screen's entry -TD
22306 # * several corrections based on tic's new parameter-checking code -TD
22307 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22308 # bracketing sequences that reset video attributes (\E8 would restore
22312 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22315 # * improved scoansi, based on SCO man-page, and testing console,
22316 # scoterm with tack -TD
22319 # * modify kterm to use acsc via SCS controls.
22322 # * screen 3.9.8 allows xterm mouse controls to pass-through
22325 # * remove spurious "%|" from some xterm entries.
22328 # * modify 'screen' khome/kend to match screen 3.09.08
22329 # * add examples of 'screen' customization (screen.xterm-xfree86,
22330 # screen.xterm-r6, screen.teraterm) -TD
22333 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22334 # * add "Apple_Terminal" entries -Benjamin Sittler
22335 # * remove time-delays from "Apple_Terminal" entries -TD
22336 # * make sgr entries time-delays consistent with individual caps -TD
22339 # * corrected/updated screen.xterm-xfree86
22342 # * ELKS descriptions, from Federico Bianchi
22343 # * add u6 (CSR) to Eterm (Michael Jennings).
22346 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22347 # tic which handles names no longer than 14 characters. Add
22348 # corresponding descriptions for the Darwin PowerPC console named
22349 # "xnuppc" -Benjamin Sittler
22352 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22355 # * add "putty" entry -TD
22356 # * updated "Apple_Terminal" entries -Benjamin Sittler
22359 # * add ms-vt100-color entry -TD
22360 # * add "konsole" entries -TD
22363 # * update gnome entry to Redhat 7.2 -TD
22366 # * add kf13-kf48 strings to cons25w -TD
22367 # * add pcvt25-color entry -TD
22368 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22369 # * improve some features of scoansi entry based on SCO's version -TD
22370 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22373 # * add kcbt to screen entry -TD
22376 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22379 # * split out linux-basic entry, making linux-c inherit from that, and
22380 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22381 # the history of this console type -TD
22382 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22383 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22386 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22389 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22390 # in the latter -TD
22393 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22394 # * ncr260wy350pp has only 16 color pairs -TD
22395 # * add sun-type4 from NetBSD -TD
22396 # * update xterm-xfree86 to current (patch 170) -TD
22397 # * add screen-bce, screen-s entries -TD
22398 # * add xterm-1002, xterm-1003 entries -TD
22401 # * update homepage for Top Gun Telnet/SSH
22404 # * reduce duplication in emx entries, added emx-base -TD
22407 # * corrected acs for screen.teraterm -TD
22408 # * add tkterm entry -TD
22411 # * cygwin changes from Charles Wilson:
22412 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22413 # primary instead of nxterm, to match XFree86's xterm.terminfo
22414 # usage and to prevent circular links.
22415 # (rxvt): add additional codes from rxvt.org.
22416 # (rxvt-color): new alias
22417 # (rxvt-xpm): new alias
22418 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22419 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22420 # with a "native" MSWin GUI. Each takes different acsc codes,
22421 # which are both different from the "normal" rxvt's acsc.
22422 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22423 # (cygwinDBG): ditto.
22426 # * update gnome terminal entries -TD
22429 # * add entries for djgpp 2.03 and 2.04 -TD
22432 # * add alias for vtnt -TD
22433 # * update xterm-xfree86 for XFree86 4.4 -TD
22436 # * add linux-vt (Andrey V Lukyanov)
22439 # * add screen.linux -TD
22442 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22445 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22446 # * add vt100+ and vt-utf8 entries -TD
22447 # * add uwin entry -TD
22450 # * add sgr strings to several common entries lacking them, e.g.,
22451 # screen, to make the entries more portable -TD
22452 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22453 # * similar fixups for cvvis/cnorm various entries -TD
22456 # * remove 'ncv' from xterm-256color (patch 188) -TD
22460 # * add xterm-xf86-v44 -TD
22461 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22462 # on G1 being used via an ISO-2022 escape sequence (report by
22463 # Juliusz Chroboczek) -TD
22464 # * add 'hurd' entry -TD
22467 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22469 # * align with xterm #192's use of xterm-new -TD
22470 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22471 # * make xterm-new the default "xterm" -TD
22474 # * minor fixes for emu -TD
22476 # * add rmam/smam to linux (Trevor Van Bremen)
22477 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22478 # * fixes for avatar0 -TD
22479 # * fixes for vp3a+ -TD
22482 # * add xterm-pc-fkeys -TD
22483 # * review/update gnome and gnome-rh90 entries (prompted by
22484 # Redhat Bugzilla #122815) -TD
22485 # * review/update konsole entries -TD
22486 # * add sgr, correct sgr0 for kterm and mlterm -TD
22487 # * correct tsl string in kterm -TD
22490 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22491 # * add sgr, rc/sc and ech to syscons entries -TD
22492 # * add function-keys to decansi -TD
22493 # * add sgr to mterm-ansi -TD
22494 # * add sgr, civis, cnorm to emu -TD
22495 # * correct/simplify cup in addrinfo -TD
22496 # * corrections for gnome and konsole entries
22497 # (Redhat Bugzilla #122815) -Hans de Goede
22498 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22499 # ISO-2022 strings for rmacs/smacs -TD
22502 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22505 # * improved putty entry -Robert de Bath
22508 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22509 # with the common usage of bce/ech -TD
22510 # * remove khome from vt220 (vt220's have no home key) -TD
22511 # * add rxvt+pcfkeys -TD
22514 # * modify several entries to ensure xterm mouse and cursor visibility
22515 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22516 # Eterm, screen. (The xterm entries are left alone - old ones for
22517 # compatibility, and the new ones do not require this change) -TD
22520 # * add morphos entry -Pavel Fedin
22521 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22522 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22525 # * update wsvt25 entry -TD
22528 # * update pairs for xterm-88color and xterm-256color to reflect the
22529 # ncurses extended-color support -TD
22532 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22533 # * add aixterm-16color to demonstrate 16-color capability -TD
22536 # * add media-copy to vt100 -TD
22537 # * corrected acsc string for vt52 -TD
22540 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22542 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22545 # * re-corrected acsc string for vt52 -TD
22548 # * corrected sun-il sgr string which referred to bold and underline -TD
22549 # * add sun-color entry -TD
22552 # * modify sgr0 in several entries to reset alternate-charset as in the
22554 # * modify sgr string of prism9 to better match the individual
22558 # * correct order of use= in rxvt-basic -TD
22561 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22564 # * other minor fixes to cygwin based on tack -TD
22565 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22568 # * add nsterm-16color entry -TD
22569 # * remove ncv flag from xterm-16color -TD
22570 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22571 # * update mlterm entry to 2.9.2 -TD
22574 # * fixes to make nsterm-16color match report
22575 # by Christian Ebert -Alain Bench
22578 # * add xterm+256color building block -TD
22579 # * add gnome-256color, putty-256color, rxvt-256color -TD
22582 # * add hpterm-color -TD
22585 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22586 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22587 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22588 # * improve xterm-256color by combining the ibm+16color setaf/setab
22589 # strings with SGR 48. The setf/setb strings also are cancelled here
22590 # rather than omitted so derived entries will cancel those also -Alain
22594 # * add some notes regarding copyright to terminfo.src -TD
22595 # * use rxvt+pcfkeys in Eterm -TD
22596 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22597 # as one would expect (km sends ESC rather than setting the 8th bit
22599 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22600 # * add konsole-solaris -TD
22603 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22604 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22605 # * modify xterm-24 to inherit from "xterm" -TD
22606 # * add xiterm entry -TD
22607 # * add putty-vt100 entry -TD
22608 # * corrected spelling of Michael A Dorman's name, prompted by
22609 # http://www.advogato.org/person/mdorman/diary.html -TD
22612 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22613 # * update xterm+pcfkeys to match xterm #216 -TD
22616 # * make descriptions of xterm entries consistent with its terminfo -TD
22619 # * add xfce, mgt -TD
22622 # * correct acsc string in kterm -TD
22625 # * add kon entry -TD
22626 # * remove invis from linux and related entries, add klone+sgr8 for those
22627 # that implement the feature (or have not been shown to lack it) -TD
22630 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22631 # * minor improvements to rxvt+pcfkeys -TD
22634 # * fix a few typos in if/then/else expressions -TD
22637 # * add several GNU Screen variations with 16- and 256-colors, and
22638 # status line (Alain Bench).
22641 # * add Newbury Data entries (Jean-Charles Billaud).
22644 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22647 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22648 # * add konsole-256color entry -TD
22651 # * add 9term entry (request by Juhapekka Tolvanen) -TD
22654 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
22655 # * add shift-control- and control-modified keys for rxvt editing
22657 # * update mlterm entry to 2.9.3 -TD
22658 # * add mlterm+pcfkeys -TD
22661 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
22662 # xterm+pcc0, etc., to make the corresponding building blocks reflect
22663 # xterm's capabilities -TD
22664 # * add mrxvt entry -TD
22665 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22668 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
22671 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22672 # xterm starting with patch #216 -TD
22673 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
22674 # to match xterm #230 -TD
22675 # * extend xterm+pccX entries to match xterm #230 -TD
22676 # * add xterm+app, xterm+noapp, from xterm #230 -TD
22677 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22680 # * add screen.rxvt -TD
22683 # * add screen+fkeys (prompted by Debian #478094) -TD
22686 # * add screen.mlterm -TD
22687 # * improve mlterm and mlterm+pcfkeys -TD
22690 # * add Eterm-256color, Eterm-88color -TD
22691 # * add rxvt-88color -TD
22694 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22695 # original to teraterm2.3 -TD
22696 # * update "gnome" to 2.22.3 -TD
22697 # * update "konsole" to 1.6.6 -TD
22698 # * add "aterm" -TD
22699 # * add "linux2.6.26" -TD
22702 # * change several \E[2g (clear tab at current column) to \E[3g
22703 # (clear all tabs) to match definition for tbc capability -TD
22706 # * add eterm-color -TD
22709 # * add screen.Eterm -TD
22712 # * correct typo in pfkey of ansi.sys-old
22713 # (report by Kalle Olavi Niemitalo)
22714 # * move function- and cursor-keys from emx-base to ansi.sys, and create
22715 # a pfkey capability which handles F1-F48 -TD
22718 # * add vwmterm entry (Bryan Christ)
22721 # * change ncv and op capabilities in sun-color to match Sun's entry for
22722 # this (report by Laszlo Peter)
22723 # * improve interix smso by using reverse rather than bold (report by
22724 # Kristof Zelechovski).
22727 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
22728 # * add linux-16color (Benjamin Sittler)
22729 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
22730 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
22731 # * add ccc and initc capabilities to xterm-16color -TD
22734 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
22737 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
22740 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
22741 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
22744 # * add bterm (bogl 0.1.18) -TD
22745 # * minor fix to rxvt+pcfkeys -TD
22748 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
22751 # * add several screen-bce.XXX entries -TD
22754 # * modify screen-bce.XXX entries to exclude ech, since screen's color
22755 # model does not clear with color for that feature -TD
22758 # * rename atari and st52 to atari-old, st52-old, use newer entries from
22759 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
22762 # * add mlterm+256color entry -TD
22765 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
22766 # the alternate character set (patch by Nicholas Marriott)
22769 # * improve acsc for vt52 (Benjamin Sittler)
22770 # * modify nsterm entries for consistent sgr/sgr0 -TD
22771 # * modify xnuppc entries for consistent sgr/sgr0 -TD
22772 # * add invis to tek4115 sgr -TD
22775 # * reformat acsc strings to canonical format -TD
22778 # * add "XT" capability to entries for terminals that support both
22779 # xterm-style mouse- and title-controls, for "screen" which
22780 # special-cases TERM beginning with "xterm" or "rxvt" -TD
22783 # * fill in no-parameter forms of cursor-movement where a parameterized
22784 # form is available -TD
22785 # * fill in missing cursor controls where the form of the controls is
22787 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
22790 # * correct comparison used for setting 16-colors in linux-16color
22791 # entry (Novell #644831) -TD
22792 # * improve linux-16color entry, using "dim" for color-8 which makes it
22793 # gray rather than black like color-0 -TD
22796 # * make "vte" the principal entry defining "gnome", since GNOME terminal
22797 # is merely one of several terminals whose behavior is provided by this
22801 # * fix typo in rmso for tek4106 -Goran Weinholt
22804 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
22805 # * also suppress ncv in konsole-base -TD
22808 # * add U8 feature to denote entries for terminal emulators which do not
22809 # support VT100 SI/SO when processing UTF-8 encoding -TD
22810 # * add xterm-utf8 as a demo of the U8 feature -TD
22813 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
22816 # * update minix entry to minix 3.2 (Thomas Cort).
22819 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
22820 # * remove a backslash which continued comment, obscuring altos3
22821 # definition with OpenBSD toolset (Nicholas Marriott).
22824 # * add/use xterm+tmux chunk from xterm #271 -TD
22825 # * resync xterm-new entry from xterm #271 -TD
22826 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
22827 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
22828 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
22831 # * add kich1 to sun (Yuri Pankov)
22832 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
22835 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
22838 # * minor cleanup of X-terminal emulator section -TD
22839 # * add terminator entry -TD
22840 # * add simpleterm entry -TD
22843 # * add xterm+kbs fragment from xterm #272 -TD
22846 # * add pccon entries for OpenBSD console (Alexei Malinin)
22849 # * corrected old changelog comments -TD
22852 # * add putty-sco -TD
22855 # * add mach-gnu (Samuel Thibault)
22856 # * add mach-gnu-color, tweaks to mach-gnu -TD
22857 # * make sgr for sun-color agree with smso -TD
22858 # * make sgr for prism9 agree with other caps -TD
22859 # * make sgr for icl6404 agree with other caps -TD
22860 # * make sgr for ofcons agree with other caps -TD
22861 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
22862 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
22863 # * make sgr for avt-ns agree with other caps -TD
22866 # * make sgr for xterm-pcolor agree with other caps -TD
22867 # * make sgr for att5425 agree with other caps -TD
22868 # * make sgr for att630 agree with other caps -TD
22869 # * make sgr for linux entries agree with other caps -TD
22870 # * make sgr for tvi9065 agree with other caps -TD
22871 # * make sgr for ncr260vt200an agree with other caps -TD
22872 # * make sgr for ncr160vt100pp agree with other caps -TD
22873 # * make sgr for ncr260vt300an agree with other caps -TD
22874 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
22875 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
22878 # * correct order of use-clauses in st-256color -TD
22881 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
22884 # * document all of the user-defined capabilities in one place -TD
22885 # * add XT to some places to improve usefulness for other applications
22886 # than screen, which would like to pretend that xterm's title is
22887 # a status-line. -TD
22888 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
22889 # of ordering and overrides -TD
22892 # * add msgr to vt420, similar DEC vtXXX entries -TD
22893 # * add several missing vt420 capabilities from vt220 -TD
22894 # * factor out ansi+pp from several entries -TD
22895 # * change xterm+sl and xterm+sl-twm to include only the status-line
22896 # capabilities and not "use=xterm", making them more generally useful
22897 # as building-blocks -TD
22898 # * add dec+sl building block, as example -TD
22901 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
22902 # * add eslok flag to dec+sl -TD
22903 # * dec+sl applies to vt320 and up -TD
22904 # * drop wsl width from xterm+sl -TD
22905 # * reuse xterm+sl in putty and nsca-m -TD
22906 # * add ansi+tabs to vt520 -TD
22907 # * add ansi+enq to vt220-vt520 -TD
22910 # * remove p6 (bold) from opus3n1+ for consistency -TD
22911 # * remove acs stuff from env230 per clues in Ingres termcap -TD
22912 # * modify env230 sgr/sgr0 to match other capabilities -TD
22913 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
22914 # * make sgr for dku7202 agree with other caps -TD
22915 # * make sgr for ibmpc agree with other caps -TD
22916 # * make sgr for tek4107 agree with other caps -TD
22917 # * make sgr for ndr9500 agree with other caps -TD
22918 # * make sgr for sco-ansi agree with other caps -TD
22919 # * make sgr for d410 agree with other caps -TD
22920 # * make sgr for d210 agree with other caps -TD
22921 # * make sgr for d470c, d470c-7b agree with other caps -TD
22924 # * rewrite vt520 entry based on vt420 -TD
22925 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
22928 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
22929 # analysis by Martin Husemann).
22930 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
22931 # Onno van der Linden).
22932 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
22933 # * add kdch1, etc., to qvt108 -TD
22934 # * add dl1/il1 to some entries based on dl/il values -TD
22935 # * add dl to simpleterm -TD
22938 # * modify some older xterm entries to align with xterm source -TD
22939 # * separate "xterm-old" alias from "xterm-r6" -TD
22942 # * add E3 to xterm-basic and putty -TD
22945 # * add nsterm-256color, make this the default nsterm -TD
22946 # * remove bw from nsterm-bce, per testing with tack -TD
22949 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
22950 # (patch by Christian Persch).
22952 ######## SHANTIH! SHANTIH! SHANTIH!