curs_mouse 3x



curs_mouse(3x)                                           curs_mouse(3x)




NAME

       getmouse, ungetmouse, mousemask, wenclose, mouse_trafo,
       wmouse_trafo, mouseinterval - mouse interface through
       curses


SYNOPSIS

       #include <curses.h>

       typedef unsigned long mmask_t;

       typedef struct
       {
           short id;         /* ID to distinguish multiple devices */
           int x, y, z;      /* event coordinates */
           mmask_t bstate;   /* button state bits */
       }
       MEVENT;
       int getmouse(MEVENT *event);
       int ungetmouse(MEVENT *event);
       mmask_t mousemask(mmask_t newmask, mmask_t *oldmask);
       bool wenclose(const WINDOW *win, int y, int x);
       bool mouse_trafo(int* pY, int* pX, bool to_screen);
       bool wmouse_trafo(const WINDOW* win, int* pY, int* pX,
            bool to_screen);
       int mouseinterval(int erval);


DESCRIPTION

       These  functions provide an interface to mouse events from
       ncurses(3x).  Mouse events are  represented  by  KEY_MOUSE
       pseudo-key values in the wgetch input stream.

       To  make mouse events visible, use the mousemask function.
       This will set the mouse events to  be  reported.   By  de-
       fault,  no  mouse  events are reported.  The function will
       return a mask to indicate which  of  the  specified  mouse
       events  can be reported; on complete failure it returns 0.
       If oldmask is non-NULL, this function fills the  indicated
       location  with  the  previous  value of the given window's
       mouse event mask.

       As a side effect, setting a zero mousemask  may  turn  off
       the  mouse pointer; setting a nonzero mask may turn it on.
       Whether this happens is device-dependent.

       Here are the mouse event type masks which may be defined:


       Name                     Description
       ---------------------------------------------------------------------
       BUTTON1_PRESSED          mouse button 1 down
       BUTTON1_RELEASED         mouse button 1 up
       BUTTON1_CLICKED          mouse button 1 clicked
       BUTTON1_DOUBLE_CLICKED   mouse button 1 double clicked
       BUTTON1_TRIPLE_CLICKED   mouse button 1 triple clicked
       ---------------------------------------------------------------------
       BUTTON2_PRESSED          mouse button 2 down
       BUTTON2_RELEASED         mouse button 2 up
       BUTTON2_CLICKED          mouse button 2 clicked
       BUTTON2_DOUBLE_CLICKED   mouse button 2 double clicked
       BUTTON2_TRIPLE_CLICKED   mouse button 2 triple clicked
       ---------------------------------------------------------------------

       BUTTON3_PRESSED          mouse button 3 down
       BUTTON3_RELEASED         mouse button 3 up
       BUTTON3_CLICKED          mouse button 3 clicked
       BUTTON3_DOUBLE_CLICKED   mouse button 3 double clicked
       BUTTON3_TRIPLE_CLICKED   mouse button 3 triple clicked
       ---------------------------------------------------------------------
       BUTTON4_PRESSED          mouse button 4 down
       BUTTON4_RELEASED         mouse button 4 up
       BUTTON4_CLICKED          mouse button 4 clicked
       BUTTON4_DOUBLE_CLICKED   mouse button 4 double clicked
       BUTTON4_TRIPLE_CLICKED   mouse button 4 triple clicked
       ---------------------------------------------------------------------
       BUTTON5_PRESSED          mouse button 5 down
       BUTTON5_RELEASED         mouse button 5 up
       BUTTON5_CLICKED          mouse button 5 clicked
       BUTTON5_DOUBLE_CLICKED   mouse button 5 double clicked
       BUTTON5_TRIPLE_CLICKED   mouse button 5 triple clicked
       ---------------------------------------------------------------------
       BUTTON_SHIFT             shift was down during button state change
       BUTTON_CTRL              control was down during button state change
       BUTTON_ALT               alt was down during button state change
       ALL_MOUSE_EVENTS         report all button state changes
       REPORT_MOUSE_POSITION    report mouse movement
       ---------------------------------------------------------------------

       Once a class of mouse events have been made visible  in  a
       window, calling the wgetch function on that window may re-
       turn KEY_MOUSE as an indicator that a mouse event has been
       queued.   To read the event data and pop the event off the
       queue, call getmouse.  This function will return OK  if  a
       mouse  event  is actually visible in the given window, ERR
       otherwise.  When getmouse returns OK, the  data  deposited
       as  y  and  x  in  the event structure coordinates will be
       screen-relative character-cell coordinates.  The  returned
       state  mask  will have exactly one bit set to indicate the
       event type.

       The ungetmouse function behaves  analogously  to  ungetch.
       It  pushes a KEY_MOUSE event onto the input queue, and as-
       sociates with that event the given state data and  screen-
       relative character-cell coordinates.

       The  wenclose  function  tests  whether  a  given  pair of
       screen-relative character-cell coordinates is enclosed  by
       a  given  window, returning TRUE if it is and FALSE other-
       wise.  It is useful for determining  what  subset  of  the
       screen windows enclose the location of a mouse event.

       The wmouse_trafo function transforms a given pair of coor-
       dinates from stdscr-relative  coordinates  to  coordinates
       relative to the given window or vice versa.  Please remem-
       ber, that stdscr-relative coordinates are not always iden-
       tical  to window-relative coordinates due to the mechanism
       to reserve lines on top or bottom of the screen for  other
       purposes (see the ripoffline() and slk_init calls, for ex-
       ample).  If the parameter to_screen is TRUE, the  pointers
       pY, pX must reference the coordinates of a location inside
       the window win.  They are converted to window-relative co-
       ordinates  and returned through the pointers.  If the con-
       version was successful, the function returns TRUE.  If one
       of  the  parameters was NULL or the location is not inside
       the window, FALSE is returned.  If to_screen is FALSE, the
       pointers  pY,  pX  must  reference window-relative coordi-
       nates.  They are converted to stdscr-relative  coordinates
       if  the  window win encloses this point.  In this case the
       function returns TRUE.  If one of the parameters  is  NULL
       or  the point is not inside the window, FALSE is returned.
       Please notice, that the referenced  coordinates  are  only
       replaced  by  the converted coordinates if the transforma-
       tion was successful.

       The mouse_trafo function performs the same translation  as
       wmouse_trafo, using stdscr for win.

       The mouseinterval function sets the maximum time (in thou-
       sands of a second) that can elapse between press  and  re-
       lease  events  for  them to be recognized as a click.  Use
       mouseinterval(0) to disable click resolution.  This  func-
       tion returns the previous interval value.  Use mouseinter-
       val(-1) to obtain the interval without altering  it.   The
       default is one sixth of a second.

       Note  that  mouse  events will be ignored when input is in
       cooked mode, and will cause an error beep when cooked mode
       is  being simulated in a window by a function such as get-
       str that expects a linefeed for input-loop termination.


RETURN VALUE

       getmouse and ungetmouse return the integer ERR upon  fail-
       ure or OK upon successful completion.

              getmouse
                   returns an error.  If no mouse driver was ini-
                   tialized, or if the mask parameter is zero,

              ungetmouse
                   returns an error if the FIFO is full.

       mousemask returns the mask of reportable events.

       mouseinterval returns the previous interval value,  unless
       the  terminal  was  not initialized.  In that case, it re-
       turns the maximum interval value (166).

       wenclose and wmouse_trafo are boolean functions  returning
       TRUE or FALSE depending on their test result.


PORTABILITY

       These  calls  were  designed  for ncurses(3x), and are not
       found in SVr4 curses, 4.4BSD curses, or any other previous
       version of curses.

       The feature macro NCURSES_MOUSE_VERSION is provided so the
       preprocessor can be used to test  whether  these  features
       are  present.   If  the interface is changed, the value of
       NCURSES_MOUSE_VERSION will be incremented.   These  values
       for  NCURSES_MOUSE_VERSION may be specified when configur-
       ing ncurses:

              1  has definitions for reserved events.   The  mask
                 uses 28 bits.

              2  adds definitions for button 5, removes the defi-
                 nitions for reserved events.  The mask  uses  29
                 bits.

       The  order  of the MEVENT structure members is not guaran-
       teed.  Additional fields may be added to the structure  in
       the future.

       Under  ncurses(3x),  these calls are implemented using ei-
       ther xterm's built-in mouse-tracking API or  platform-spe-
       cific drivers including
              Alessandro Rubini's gpm server.
              FreeBSD sysmouse
              OS/2 EMX
       If  you  are  using  an  unsupported  configuration, mouse
       events will not be visible to ncurses(3x) (and the  mouse-
       mask function will always return 0).

       If  the  terminfo entry contains a XM string, this is used
       in the xterm mouse driver to control the way the  terminal
       is initialized for mouse operation.  The default, if XM is
       not found, corresponds to private mode 1000 of xterm:
              \E[?1000%?%p1%{1}%=%th%el%;
       The z member in the event structure is not presently used.
       It  is  intended  for use with touch screens (which may be
       pressure-sensitive)   or   with   3D-mice/trackballs/power
       gloves.


BUGS

       Mouse  events under xterm will not in fact be ignored dur-
       ing cooked mode, if they have been enabled  by  mousemask.
       Instead,  the  xterm  mouse report sequence will appear in
       the string read.

       Mouse events under xterm will not be detected correctly in
       a  window  with  its keypad bit off, since they are inter-
       preted as a variety of function key.   Your  terminfo  de-
       scription  should  have kmous set to "\E[M" (the beginning
       of the response from xterm for mouse clicks).  Other  val-
       ues  for  kmous  are permitted, but under the same assump-
       tion, i.e., it is the beginning of the response.

       Because there are  no  standard  terminal  responses  that
       would  serve to identify terminals which support the xterm
       mouse protocol, ncurses assumes that if your  $TERM  envi-
       ronment  variable contains "xterm", or kmous is defined in
       the terminal description, then the terminal may send mouse
       events.


SEE ALSO

       curses(3x), curs_kernel(3x), curs_slk(3x).



                                                         curs_mouse(3x)

Man(1) output converted with man2html