'\" t
.\"***************************************************************************
.\" Copyright 2018-2023,2024 Thomas E. Dickey                                *
.\" Copyright 1998-2016,2017 Free Software Foundation, Inc.                  *
.\"                                                                          *
.\" Permission is hereby granted, free of charge, to any person obtaining a  *
.\" copy of this software and associated documentation files (the            *
.\" "Software"), to deal in the Software without restriction, including      *
.\" without limitation the rights to use, copy, modify, merge, publish,      *
.\" distribute, distribute with modifications, sublicense, and/or sell       *
.\" copies of the Software, and to permit persons to whom the Software is    *
.\" furnished to do so, subject to the following conditions:                 *
.\"                                                                          *
.\" The above copyright notice and this permission notice shall be included  *
.\" in all copies or substantial portions of the Software.                   *
.\"                                                                          *
.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS  *
.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF               *
.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.   *
.\" IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,   *
.\" DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR    *
.\" OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR    *
.\" THE USE OR OTHER DEALINGS IN THE SOFTWARE.                               *
.\"                                                                          *
.\" Except as contained in this notice, the name(s) of the above copyright   *
.\" holders shall not be used in advertising or otherwise to promote the     *
.\" sale, use or other dealings in this Software without prior written       *
.\" authorization.                                                           *
.\"***************************************************************************
.\"
.\" $Id: curs_inopts.3x,v 1.66 2024/04/13 22:20:29 tom Exp $
.TH curs_inopts 3X 2024-04-13 "ncurses @NCURSES_MAJOR@.@NCURSES_MINOR@" "Library calls"
.ie \n(.g \{\
.ds `` \(lq
.ds '' \(rq
.\}
.el \{\
.ie t .ds `` ``
.el   .ds `` ""
.ie t .ds '' ''
.el   .ds '' ""
.\}
.SH NAME
\fB\%cbreak\fP,
\fB\%echo\fP,
\fB\%halfdelay\fP,
\fB\%intrflush\fP,
\fB\%is_cbreak\fP,
\fB\%is_echo\fP,
\fB\%is_nl\fP,
\fB\%is_raw\fP,
\fB\%keypad\fP,
\fB\%meta\fP,
\fB\%nl\fP,
\fB\%nocbreak\fP,
\fB\%nodelay\fP,
\fB\%noecho\fP,
\fB\%nonl\fP,
\fB\%noqiflush\fP,
\fB\%noraw\fP,
\fB\%notimeout\fP,
\fB\%qiflush\fP,
\fB\%raw\fP,
\fB\%timeout\fP,
\fB\%wtimeout\fP,
\fB\%typeahead\fP \-
get and set \fIcurses\fR terminal input options
.SH SYNOPSIS
.nf
\fB#include <curses.h>
.PP
\fBint cbreak(void);
\fBint nocbreak(void);
.PP
\fBint echo(void);
\fBint noecho(void);
.PP
\fBint intrflush(WINDOW *\fIwin\fP, bool \fIbf\fP);
\fBint keypad(WINDOW *\fIwin\fP, bool \fIbf\fP);
\fBint meta(WINDOW *\fIwin\fP, bool \fIbf\fP);
\fBint nodelay(WINDOW *\fIwin\fP, bool \fIbf\fP);
\fBint notimeout(WINDOW *\fIwin\fP, bool \fIbf\fP);
.PP
\fBint nl(void);
\fBint nonl(void);
.PP
\fBint raw(void);
\fBint noraw(void);
.PP
\fBvoid qiflush(void);
\fBvoid noqiflush(void);
.PP
\fBint halfdelay(int \fItenths\fP);
\fBvoid timeout(int \fIdelay\fP);
\fBvoid wtimeout(WINDOW *\fIwin\fP, int \fIdelay\fP);
.PP
\fBint typeahead(int \fIfd\fP);
.PP
\fI/* extensions */
\fBint is_cbreak(void);
\fBint is_echo(void);
\fBint is_nl(void);
\fBint is_raw(void);
.fi
.SH DESCRIPTION
.I \%ncurses
provides several functions that let an application change the way input
from the terminal is handled.
Some are global,
applying to all windows.
Others apply only to a specific window.
Window-specific settings are not automatically applied to new or derived
windows.
An application must apply these to each window if the same behavior is
desired.
.\"
.SS "cbreak, nocbreak"
Normally,
the terminal driver buffers typed characters until a newline or carriage
return is typed.
The \fB\%cbreak\fP routine disables line buffering and
erase/kill character-processing
(interrupt and flow control characters are unaffected),
making characters typed by the user immediately available to the
program.
The \fB\%nocbreak\fP routine returns the terminal to normal (cooked)
mode.
.PP
Initially the terminal may or may not be in \fB\%cbreak\fP mode,
as the mode is inherited;
therefore,
a program should call \fB\%cbreak\fP or \fB\%nocbreak\fP explicitly.
Most interactive programs using
.I curses
set the \fB\%cbreak\fP mode.
Note that \fB\%cbreak\fP overrides \fBraw\fP.
[See \fB\%curs_getch\fP(3X) for a discussion of how these routines
interact with \fBecho\fP and \fB\%noecho\fP.]
.\"
.SS "echo, noecho"
The \fBecho\fP and \fB\%noecho\fP routines control whether characters
typed by the user are echoed by \fB\%getch\fP(3X) as they are typed.
Echoing by the terminal driver is always disabled,
but initially \fB\%getch\fP is in echo mode,
so characters typed are echoed.
Authors of most interactive programs prefer to do
their own echoing in a controlled area of the screen,
or not to echo at all,
so they disable echoing by calling \fB\%noecho\fP.
[See \fB\%curs_getch\fP(3X) for a
discussion of how these routines interact with \fB\%cbreak\fP and
\fB\%nocbreak\fP.]
.\"
.SS halfdelay
The \fB\%halfdelay\fP routine is used for half-delay mode,
which is similar to \fB\%cbreak\fP mode in that characters typed by the
user are immediately available to the program.
However,
after blocking for \fItenths\fP tenths of seconds,
\fBERR\fP is returned if nothing has been typed.
The value of \fItenths\fP must be a number between 1 and 255.
Use \fB\%nocbreak\fP to leave half-delay mode.
.\"
.SS intrflush
If the \fB\%intrflush\fP option is enabled
.RI ( bf
is
.BR TRUE ),
and an interrupt key is pressed on the keyboard
(interrupt,
break,
quit),
all output in the terminal driver queue is flushed,
giving the effect of faster response to the interrupt,
but causing
.I curses
to have the wrong idea of what is on the screen.
Disabling the option
.RI ( bf
is
.BR FALSE ),
prevents the flush.
The default for the option is inherited from the terminal driver
settings.
The
.I win
argument is ignored.
.\"
.SS keypad
The \fB\%keypad\fP option enables the keypad of the user's terminal.
If
enabled
.RI ( bf
is
.BR TRUE ),
the user can press a function key
(such as an arrow key)
and \fB\%wgetch\fP(3X) returns a single value representing the function
key,
as in \fB\%KEY_LEFT\fP.
If disabled
(\fIbf\fP is \fBFALSE\fP),
.I curses
does not treat function keys specially and the program has to interpret
the escape sequences itself.
If the keypad in the terminal can be turned on
(made to transmit)
and off
(made to work locally),
turning on this option causes the terminal keypad to be turned on when
\fB\%wgetch\fP(3X) is called.
The default value for keypad is \fBFALSE\fP.
.\"
.SS meta
Initially,
whether the terminal returns 7 or 8 significant bits on input depends on
the control mode of the terminal driver [see \fI\%termios\fP(3)].
To force 8 bits to be returned,
invoke
\fBmeta\fP(\fIwin\fP, \fBTRUE\fP);
this is equivalent,
under POSIX,
to setting the CS8 flag on the terminal.
To force 7 bits to be returned,
invoke
\fBmeta\fP(\fIwin\fP, \fBFALSE\fP);
this is equivalent,
under POSIX,
to setting the CS7 flag on the terminal.
The window argument,
.IR win ,
is always ignored.
If the terminfo capabilities
\fBsmm\fP (meta_on) and
\fBrmm\fP (meta_off) are defined for the terminal,
\fBsmm\fP is sent to the terminal when
\fBmeta\fP(\fIwin\fP, \fBTRUE\fP)
is called and \fBrmm\fP is sent when
\fBmeta\fP(\fIwin\fP, \fBFALSE\fP) is called.
.\"
.SS "nl, nonl"
The \fBnl\fP and \fBnonl\fP routines control whether the underlying
display device translates the return key into newline on input.
.\"
.SS nodelay
The \fB\%nodelay\fP option causes \fB\%getch\fP to be a non-blocking
call.
If no input is ready,
\fB\%getch\fP returns \fBERR\fP.
If disabled
.RI ( bf
is
.BR FALSE ),
\fB\%getch\fP waits until a key is pressed.
.SS notimeout
When interpreting an escape sequence,
\fB\%wgetch\fP(3X) sets a timer
while waiting for the next character.
If
\fB\%notimeout(\fIwin\fR, \fBTRUE\fP)
is called,
then \fB\%wgetch\fP does not set a timer.
The purpose of the timeout is to distinguish sequences produced by a
function key from those typed by a user.
.\"
.SS "raw, noraw"
The \fBraw\fP and \fB\%noraw\fP routines place the terminal into or out
of raw mode.
Raw mode is similar to \fB\%cbreak\fP mode,
in that characters typed are immediately passed through to the user
program.
The differences are that in raw mode,
the interrupt,
quit,
suspend,
and flow control characters are all
passed through uninterpreted,
instead of generating a signal.
The behavior of the BREAK key depends on other bits in the terminal
driver that are not set by
.IR curses .
.\"
.SS "qiflush, nqiflush"
When the \fB\%noqiflush\fP routine is used,
normal flush of input and output queues associated with the \fBINTR\fP,
\fBQUIT\fP and \fBSUSP\fP characters will not be done
[see \fB\%termios\fP(3)].
When
\fB\%qiflush\fP is called,
the queues will be flushed when these control characters are read.
You may want to call \fB\%noqiflush\fP in a signal handler if you want
output to continue as though the interrupt had not occurred,
after the handler exits.
.\"
.SS "timeout, wtimeout"
The \fB\%timeout\fP and \fB\%wtimeout\fP routines set blocking or
non-blocking read for a given window.
If \fIdelay\fP is negative,
a blocking read is used
(i.e.,
waits indefinitely for input).
If \fIdelay\fP is zero,
then a non-blocking read is used
(i.e.,
.I read
returns \fBERR\fP if no input is waiting).
If
\fIdelay\fP is positive,
then
.I read
blocks for \fIdelay\fP milliseconds,
and returns \fBERR\fP if there is still no input.
Hence,
these routines provide the same functionality as \fB\%nodelay\fP,
plus the additional capability of being able to block for only
\fIdelay\fP milliseconds
(where \fIdelay\fP is positive).
.\"
.SS typeahead
.I curses
does \*(``line-breakout optimization\*('' by looking for typeahead
periodically while updating the screen.
If input is found,
and it is coming from a terminal,
the current update is postponed until
\fB\%refresh\fP(3X) or \fB\%doupdate\fP is called again.
This allows faster response to commands typed in advance.
Normally,
the input
.I FILE
pointer passed to \fB\%newterm\fP,
or \fBstdin\fP in the case that \fB\%initscr\fP was used,
will be used to do this typeahead checking.
The \fB\%typeahead\fP routine specifies that the file descriptor
\fIfd\fP is to be used to check for typeahead instead.
If \fIfd\fP is
\-1,
then no typeahead checking is done.
.\"
.SH RETURN VALUE
All routines that return an integer return \fBERR\fP upon failure and
\fBOK\fP
(SVr4 specifies only \*(``an integer value other than \fBERR\fP\*('')
upon successful completion,
unless otherwise noted in the preceding routine descriptions.
.PP
X/Open Curses does not specify any error conditions.
In this implementation,
functions with a window parameter will return an error if it is null.
Any function will also return an error if the terminal was not
initialized.
Also,
.RS 3
.TP 5
\fB\%halfdelay\fP
returns an error
if its parameter is outside the range 1..255.
.RE
.SH NOTES
\fBecho\fP,
\fB\%noecho\fP,
\fB\%halfdelay\fP,
\fB\%intrflush\fP,
\fBmeta\fP,
\fBnl\fP,
\fBnonl\fP,
\fB\%nodelay\fP,
\fB\%notimeout\fP,
\fB\%noqiflush\fP,
\fB\%qiflush\fP,
\fB\%timeout\fP,
and
\fB\%wtimeout\fP
may be implemented as macros.
.PP
\fB\%noraw\fP and \fB\%nocbreak\fP follow historical practice in that
they attempt to restore normal (\*(``cooked\*('') mode
from raw and cbreak modes respectively.
Mixing \fBraw\fP/\fB\%noraw\fP and \fB\%cbreak\fP/\fB\%nocbreak\fP calls
leads to terminal driver control states that are hard to predict or
understand;
doing so is not recommended.
.SH EXTENSIONS
.I \%ncurses
provides four \*(``is_\*('' functions that may be used to detect if the
corresponding flags were set or reset.
.PP
.TS
center;
Lb Lb Lb
L  L  L .
Query	Set	Reset
_
is_cbreak	cbreak	nocbreak
is_echo	echo	noecho
is_nl	nl	nonl
is_raw	raw	noraw
.TE
.PP
In each case,
the function returns
.TP 4 \" "-1" + 2n
1
if the flag is set,
.TP
0
if the flag is reset,
or
.TP
\-1
if the library is not initialized.
.PP
They were designed for
\fB\%ncurses\fP(3X),
and are not found in SVr4
.IR curses ,
4.4BSD
.IR curses ,
or any other previous
.I curses
implementation.
.SH PORTABILITY
Applications employing
.I \%ncurses
extensions should condition their use on the visibility of the
.B \%NCURSES_VERSION
preprocessor macro.
.PP
Except as noted in section \*(``EXTENSIONS\*('' above,
X/Open Curses, Issue 4, Version 2 describes these functions.
.PP
.I \%ncurses
follows X/Open Curses
and the historical practice of AT&T
.I curses
implementations,
in that the echo bit is cleared when
.I curses
initializes the terminal state.
BSD
.I curses
differed from this slightly;
it left the echo bit on at initialization,
but the BSD \fBraw\fP call turned it off as a side effect.
For best portability,
set \fBecho\fP or \fB\%noecho\fP explicitly just after initialization,
even if your program remains in cooked mode.
.PP
X/Open Curses is ambiguous regarding whether \fBraw\fP should disable
the CR/LF translations controlled by \fBnl\fP and \fBnonl\fP.
BSD
.I curses
did turn off these translations;
AT&T
.I curses
(at least as late as SVr1)
did not.
.I \%ncurses
does so,
on the assumption that a programmer requesting raw input wants a clean
(ideally,
8-bit clean)
connection that the operating system will not alter.
.PP
When \fB\%keypad\fP is first enabled,
.I \%ncurses
loads the key definitions for the current terminal description.
If the terminal description includes extended string capabilities,
e.g.,
from using the
.B \-x
option of \fB\%@TIC@\fP,
then
.I \%ncurses
also defines keys for the capabilities whose names begin with
\*(``k\*(''.
The corresponding keycodes are generated and
(depending on previous loads of terminal descriptions)
may differ from one execution of a program to the next.
The generated keycodes are recognized by the \fB\%keyname\fP(3X)
function
(which will then return a name beginning with \*(``k\*('' denoting the
terminfo capability name rather than \*(``K\*('',
used for
.I curses
key names).
On the other hand,
an application can use \fB\%define_key\fP(3X) to establish
a specific keycode for a given string.
This makes it possible for an application to check for an extended
capability's presence with \fB\%tigetstr\fP,
and reassign the keycode to match its own needs.
.PP
Low-level applications can use \fB\%tigetstr\fP to obtain the definition
of any particular string capability.
Higher-level applications which use the
.I curses
\fB\%wgetch\fP and similar functions to return keycodes rely upon the
order in which the strings are loaded.
If more than one key definition has the same string value,
then \fB\%wgetch\fP can return only one keycode.
Most
.I curses
implementations
(including
.IR \%ncurses )
load key definitions in the order
defined by the array of string capability names.
The last key to be loaded determines the keycode which will be returned.
In
.IR \%ncurses ,
you may also have extended capabilities interpreted as key definitions.
These are loaded after the predefined keys,
and if a capability's value is the same as a previously-loaded
key definition,
the later definition is the one used.
.SH HISTORY
Formerly,
.I \%ncurses
used
.B \%nl
and
.B \%nonl
to control the conversion of newlines to carriage return/line feed
on output as well as input.
X/Open Curses documents the use of these functions only for input.
This difference arose from converting the
.I \%pcurses
source (1986),
which used
\fI\%ioctl\fP(2) calls and the
.I \%sgttyb
structure,
to
.I \%termios
(the POSIX terminal API).
In the former,
both input and output were controlled via a single option
.BR \%CRMOD ,
while the latter separates these features.
Because that conversion interferes with output optimization,
.I \%ncurses
6.2 (2020) amended
.B \%nl
and
.B \%nonl
to eliminate their effect on output.
.SH SEE ALSO
\fB\%curses\fP(3X),
\fB\%curs_getch\fP(3X),
\fB\%curs_initscr\fP(3X),
\fB\%curs_util\fP(3X),
\fB\%define_key\fP(3X),
\fB\%termios\fP(3)