+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:2182: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:2185: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# This should have been defined by AC_PROG_CC
+: ${CC:=cc}
+
+echo "$as_me:2193: checking \$CFLAGS variable" >&5
+echo $ECHO_N "checking \$CFLAGS variable... $ECHO_C" >&6
+case "x$CFLAGS" in
+(*-[IUD]*)
+ echo "$as_me:2197: result: broken" >&5
+echo "${ECHO_T}broken" >&6
+ { echo "$as_me:2199: WARNING: your environment uses the CFLAGS variable to hold CPPFLAGS options" >&5
+echo "$as_me: WARNING: your environment uses the CFLAGS variable to hold CPPFLAGS options" >&2;}
+ cf_flags="$CFLAGS"
+ CFLAGS=
+ for cf_arg in $cf_flags
+ do
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_arg
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}$cf_new_cppflags"
+
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS "
+ EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags"
+
+fi
+
+ done
+ ;;
+(*)
+ echo "$as_me:2307: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+ ;;
+esac
+
+echo "$as_me:2312: checking \$CC variable" >&5
+echo $ECHO_N "checking \$CC variable... $ECHO_C" >&6
+case "$CC" in
+(*[\ \ ]-*)
+ echo "$as_me:2316: result: broken" >&5
+echo "${ECHO_T}broken" >&6
+ { echo "$as_me:2318: WARNING: your environment uses the CC variable to hold CFLAGS/CPPFLAGS options" >&5
+echo "$as_me: WARNING: your environment uses the CC variable to hold CFLAGS/CPPFLAGS options" >&2;}
+ # humor him...
+ cf_prog=`echo "$CC" | sed -e 's/ / /g' -e 's/[ ]* / /g' -e 's/[ ]*[ ]-[^ ].*//'`
+ cf_flags=`echo "$CC" | ${AWK:-awk} -v prog="$cf_prog" '{ printf("%s", substr($0,1+length(prog))); }'`
+ CC="$cf_prog"
+ for cf_arg in $cf_flags
+ do
+ case "x$cf_arg" in
+ (x-[IUDfgOW]*)
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_arg
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}$cf_new_cppflags"
+
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS "
+ EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags"
+
+fi
+
+ ;;
+ (*)
+ CC="$CC $cf_arg"
+ ;;
+ esac
+ done
+ test -n "$verbose" && echo " resulting CC: '$CC'" 1>&6
+
+echo "${as_me:-configure}:2435: testing resulting CC: '$CC' ..." 1>&5
+
+ test -n "$verbose" && echo " resulting CFLAGS: '$CFLAGS'" 1>&6
+
+echo "${as_me:-configure}:2439: testing resulting CFLAGS: '$CFLAGS' ..." 1>&5
+
+ test -n "$verbose" && echo " resulting CPPFLAGS: '$CPPFLAGS'" 1>&6
+
+echo "${as_me:-configure}:2443: testing resulting CPPFLAGS: '$CPPFLAGS' ..." 1>&5
+
+ ;;
+(*)
+ echo "$as_me:2447: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+ ;;
+esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_main_return=return
+echo "$as_me:2458: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2479 "configure"
+#include "confdefs.h"
+#include <assert.h>
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:2484: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ egrep -v '^ *\+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:2490: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2513 "configure"
+#include "confdefs.h"
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:2517: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ egrep -v '^ *\+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:2523: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:2560: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2570 "configure"
+#include "confdefs.h"
+#include <assert.h>
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:2575: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ egrep -v '^ *\+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:2581: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2604 "configure"
+#include "confdefs.h"
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:2608: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ egrep -v '^ *\+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:2614: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:2642: error: C preprocessor \"$CPP\" fails sanity check" >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_main_return=return
+
+if test $ac_cv_c_compiler_gnu = yes; then
+ echo "$as_me:2655: checking whether $CC needs -traditional" >&5
+echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6
+if test "${ac_cv_prog_gcc_traditional+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2662 "configure"
+#include "confdefs.h"
+#include <sgtty.h>
+int Autoconf = TIOCGETP;
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ ac_cv_prog_gcc_traditional=yes
+else
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -rf conftest*
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2677 "configure"
+#include "confdefs.h"
+#include <termio.h>
+int Autoconf = TCGETA;
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -rf conftest*
+
+ fi
+fi
+echo "$as_me:2690: result: $ac_cv_prog_gcc_traditional" >&5
+echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+echo "$as_me:2697: checking whether $CC understands -c and -o together" >&5
+echo $ECHO_N "checking whether $CC understands -c and -o together... $ECHO_C" >&6
+if test "${cf_cv_prog_CC_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat > conftest.$ac_ext <<CF_EOF
+int main(void)
+{
+ ${cf_cv_main_return:-return}(0);
+}
+CF_EOF
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC $CFLAGS $CPPFLAGS -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+if { (eval echo "$as_me:2712: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:2715: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (eval echo "$as_me:2717: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:2720: \$? = $ac_status" >&5
+ (exit $ac_status); };
+then
+ eval cf_cv_prog_CC_c_o=yes
+else
+ eval cf_cv_prog_CC_c_o=no
+fi
+rm -rf conftest*
+
+fi
+if test $cf_cv_prog_CC_c_o = yes; then
+ echo "$as_me:2731: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:2734: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test "$cross_compiling" = yes ; then
+ LDCONFIG=:
+else
+ case "$cf_cv_system_name" in
+ (dragonfly*|mirbsd*|freebsd*)
+ test -z "$LDCONFIG" && LDCONFIG="/sbin/ldconfig -R"
+ ;;
+ (*) LDPATH=$PATH:/sbin:/usr/sbin
+ # Extract the first word of "ldconfig", so it can be a program name with args.
+set dummy ldconfig; ac_word=$2
+echo "$as_me:2748: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_LDCONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $LDCONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LDCONFIG="$LDCONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$LDPATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ if $as_executable_p "$ac_dir/$ac_word"; then
+ ac_cv_path_LDCONFIG="$ac_dir/$ac_word"
+ echo "$as_me:2765: found $ac_dir/$ac_word" >&5
+ break
+fi
+done
+
+ ;;
+esac
+fi
+LDCONFIG=$ac_cv_path_LDCONFIG
+
+if test -n "$LDCONFIG"; then
+ echo "$as_me:2776: result: $LDCONFIG" >&5
+echo "${ECHO_T}$LDCONFIG" >&6
+else
+ echo "$as_me:2779: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ ;;
+ esac
+fi
+
+echo "$as_me:2787: checking if you want to ensure bool is consistent with C++" >&5
+echo $ECHO_N "checking if you want to ensure bool is consistent with C++... $ECHO_C" >&6
+
+# Check whether --with-cxx or --without-cxx was given.
+if test "${with_cxx+set}" = set; then
+ withval="$with_cxx"
+ cf_with_cxx=$withval
+else
+ cf_with_cxx=yes
+fi;
+echo "$as_me:2797: result: $cf_with_cxx" >&5
+echo "${ECHO_T}$cf_with_cxx" >&6
+if test "X$cf_with_cxx" = Xno ; then
+ CXX=""
+ GXX=""
+else
+ # with autoconf 2.13, we can change the error to a warning:
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+ac_main_return=return
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:2815: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+echo "$as_me:2830: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ echo "$as_me:2838: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+ echo "$as_me:2841: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:2854: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_CXX="$ac_prog"
+echo "$as_me:2869: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ echo "$as_me:2877: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+ echo "$as_me:2880: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+ CXX=$ac_ct_CXX
+fi
+
+# Provide some information about the compiler.
+echo "$as_me:2892:" \
+ "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:2895: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:2898: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:2900: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:2903: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:2905: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:2908: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:2911: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2917 "configure"
+#include "confdefs.h"
+
+int
+main (void)
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2932: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:2935: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:2938: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:2941: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_compiler_gnu=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:2953: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:2959: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 2965 "configure"
+#include "confdefs.h"
+
+int
+main (void)
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2977: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:2980: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:2983: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:2986: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:2996: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+for ac_declaration in \
+ ''\
+ '#include <stdlib.h>' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+#line 3023 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+$ac_declaration
+int
+main (void)
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3036: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:3039: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:3042: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:3045: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+continue
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+#line 3055 "configure"
+#include "confdefs.h"
+$ac_declaration
+int
+main (void)
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3067: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:3070: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:3073: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:3076: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+done
+rm -rf conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_main_return=return
+
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+ac_main_return=return
+
+ if test "x$cf_with_cxx" != xno
+ then
+ # Several of the C++ configurations do not work, particularly when
+ # cross-compiling (20140913 -TD)
+ echo "$as_me:3110: checking if $CXX works" >&5
+echo $ECHO_N "checking if $CXX works... $ECHO_C" >&6
+
+ save_CPPFLAGS="$CPPFLAGS"
+ eval cf_includedir=${includedir}
+ CPPFLAGS="$CPPFLAGS -I${cf_includedir}"
+
+cat >conftest.$ac_ext <<_ACEOF
+#line 3118 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+
+int
+main (void)
+{
+
+ printf("Hello world!\n")
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3135: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:3138: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:3141: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:3144: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cxx_works=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+cf_cxx_works=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ CPPFLAGS="$save_CPPFLAGS"
+
+ echo "$as_me:3155: result: $cf_cxx_works" >&5
+echo "${ECHO_T}$cf_cxx_works" >&6
+ if test "x$cf_cxx_works" = xno
+ then
+ { echo "$as_me:3159: WARNING: Ignore $CXX, since it cannot compile hello-world." >&5
+echo "$as_me: WARNING: Ignore $CXX, since it cannot compile hello-world." >&2;}
+ cf_with_cxx=no; CXX=""; GXX="";
+ fi
+ fi
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_main_return=return
+
+ # autoconf 2.5x removed the error (hardcoding it to g++, or just blank)
+ if test "$CXX" = "g++" ; then
+ # Extract the first word of "g++", so it can be a program name with args.
+set dummy g++; ac_word=$2
+echo "$as_me:3175: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $CXX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CXX="$CXX" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ if $as_executable_p "$ac_dir/$ac_word"; then
+ ac_cv_path_CXX="$ac_dir/$ac_word"
+ echo "$as_me:3192: found $ac_dir/$ac_word" >&5
+ break
+fi
+done
+
+ ;;
+esac
+fi
+CXX=$ac_cv_path_CXX
+
+if test -n "$CXX"; then
+ echo "$as_me:3203: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+ echo "$as_me:3206: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ case "x$CXX" in
+ (x|xg++)
+ { echo "$as_me:3213: WARNING: You don't have any C++ compiler, too bad" >&5
+echo "$as_me: WARNING: You don't have any C++ compiler, too bad" >&2;}
+ cf_with_cxx=no; CXX=""; GXX="";
+ ;;
+ esac
+fi
+
+GXX_VERSION=none
+if test "$GXX" = yes; then
+ echo "$as_me:3222: checking version of ${CXX:-g++}" >&5
+echo $ECHO_N "checking version of ${CXX:-g++}... $ECHO_C" >&6
+ GXX_VERSION="`${CXX:-g++} --version| sed -e '2,$d' -e 's/^.*(GCC) //' -e 's/^[^0-9.]*//' -e 's/[^0-9.].*//'`"
+ if test -z "$GXX_VERSION"
+ then
+ GXX_VERSION=unknown
+ GXX=no
+ fi
+ echo "$as_me:3230: result: $GXX_VERSION" >&5
+echo "${ECHO_T}$GXX_VERSION" >&6
+fi
+
+case $GXX_VERSION in
+(1*|2.[0-6]*)
+ # GXX=""; CXX=""; ac_cv_prog_gxx=no
+ # cf_cxx_library=no
+ { echo "$as_me:3238: WARNING: templates do not work" >&5
+echo "$as_me: WARNING: templates do not work" >&2;}
+ ;;
+esac
+
+echo "$as_me:3243: checking if you want to build C++ binding and demo" >&5
+echo $ECHO_N "checking if you want to build C++ binding and demo... $ECHO_C" >&6
+
+# Check whether --with-cxx-binding or --without-cxx-binding was given.
+if test "${with_cxx_binding+set}" = set; then
+ withval="$with_cxx_binding"
+ cf_with_cxx_binding=$withval
+else
+ cf_with_cxx_binding=$cf_with_cxx
+fi;
+echo "$as_me:3253: result: $cf_with_cxx_binding" >&5
+echo "${ECHO_T}$cf_with_cxx_binding" >&6
+
+echo "$as_me:3256: checking if you want to build with Ada95" >&5
+echo $ECHO_N "checking if you want to build with Ada95... $ECHO_C" >&6
+echo "$as_me:3258: result: $cf_with_ada" >&5
+echo "${ECHO_T}$cf_with_ada" >&6
+
+echo "$as_me:3261: checking if you want to install terminal database" >&5
+echo $ECHO_N "checking if you want to install terminal database... $ECHO_C" >&6
+
+# Check whether --enable-db-install or --disable-db-install was given.
+if test "${enable_db_install+set}" = set; then
+ enableval="$enable_db_install"
+ cf_with_db_install=$enableval
+else
+ cf_with_db_install=yes
+fi;
+echo "$as_me:3271: result: $cf_with_db_install" >&5
+echo "${ECHO_T}$cf_with_db_install" >&6
+
+echo "$as_me:3274: checking if you want to install manpages" >&5
+echo $ECHO_N "checking if you want to install manpages... $ECHO_C" >&6
+
+# Check whether --with-manpages or --without-manpages was given.
+if test "${with_manpages+set}" = set; then
+ withval="$with_manpages"
+ cf_with_manpages=$withval
+else
+ cf_with_manpages=yes
+fi;
+echo "$as_me:3284: result: $cf_with_manpages" >&5
+echo "${ECHO_T}$cf_with_manpages" >&6
+
+echo "$as_me:3287: checking if you want to build programs such as tic" >&5
+echo $ECHO_N "checking if you want to build programs such as tic... $ECHO_C" >&6
+
+# Check whether --with-progs or --without-progs was given.
+if test "${with_progs+set}" = set; then
+ withval="$with_progs"
+ cf_with_progs=$withval
+else
+ cf_with_progs=yes
+fi;
+echo "$as_me:3297: result: $cf_with_progs" >&5
+echo "${ECHO_T}$cf_with_progs" >&6
+
+if test -f $srcdir/tack/tack.h; then
+ if test "x$cross_compiling" = xyes ; then
+ test -n "$verbose" && echo " ignoring tack because we are cross-compiling" 1>&6
+
+echo "${as_me:-configure}:3304: testing ignoring tack because we are cross-compiling ..." 1>&5
+
+ cf_with_tack=no
+ else
+ echo "$as_me:3308: checking if you want to build the tack program" >&5
+echo $ECHO_N "checking if you want to build the tack program... $ECHO_C" >&6
+
+# Check whether --with-tack or --without-tack was given.
+if test "${with_tack+set}" = set; then
+ withval="$with_tack"
+ cf_with_tack=$withval
+else
+ cf_with_tack=$cf_with_progs
+fi;
+ echo "$as_me:3318: result: $cf_with_tack" >&5
+echo "${ECHO_T}$cf_with_tack" >&6
+ fi
+else
+ cf_with_tack=no
+fi
+
+echo "$as_me:3325: checking if you want to build test-programs" >&5
+echo $ECHO_N "checking if you want to build test-programs... $ECHO_C" >&6
+
+# Check whether --with-tests or --without-tests was given.
+if test "${with_tests+set}" = set; then
+ withval="$with_tests"
+ cf_with_tests=$withval
+else
+ cf_with_tests=yes
+fi;
+echo "$as_me:3335: result: $cf_with_tests" >&5
+echo "${ECHO_T}$cf_with_tests" >&6
+
+echo "$as_me:3338: checking if you wish to install curses.h" >&5
+echo $ECHO_N "checking if you wish to install curses.h... $ECHO_C" >&6
+
+# Check whether --with-curses-h or --without-curses-h was given.
+if test "${with_curses_h+set}" = set; then
+ withval="$with_curses_h"
+ with_curses_h=$withval
+else
+ with_curses_h=yes
+fi;
+echo "$as_me:3348: result: $with_curses_h" >&5
+echo "${ECHO_T}$with_curses_h" >&6
+
+modules_to_build="ncurses"
+test "X$cf_with_progs" != Xno && modules_to_build="$modules_to_build progs"
+test "X$cf_with_tack" != Xno && modules_to_build="$modules_to_build tack"
+modules_to_build="$modules_to_build panel menu form"
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+for ac_prog in mawk gawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:3373: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_AWK="$ac_prog"
+echo "$as_me:3388: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:3396: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:3399: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AWK" && break
+done
+
+test -z "$AWK" && { { echo "$as_me:3406: error: No awk program found" >&5
+echo "$as_me: error: No awk program found" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:3410: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:3420: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+ test -z "$EGREP" && { { echo "$as_me:3424: error: No egrep program found" >&5
+echo "$as_me: error: No egrep program found" >&2;}
+ { (exit 1); exit 1; }; }
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:3440: checking for a BSD compatible install" >&5
+echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ for ac_dir in $PATH; do
+ IFS=$ac_save_IFS
+ # Account for people who put trailing slashes in PATH elements.
+ case $ac_dir/ in
+ / | ./ | .// | /cC/* \
+ | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
+ | /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if $as_executable_p "$ac_dir/$ac_prog"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:3489: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+for ac_prog in lint cppcheck splint
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:3504: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LINT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LINT"; then
+ ac_cv_prog_LINT="$LINT" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_LINT="$ac_prog"
+echo "$as_me:3519: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+LINT=$ac_cv_prog_LINT
+if test -n "$LINT"; then
+ echo "$as_me:3527: result: $LINT" >&5
+echo "${ECHO_T}$LINT" >&6
+else
+ echo "$as_me:3530: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$LINT" && break
+done
+
+echo "$as_me:3537: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:3541: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:3544: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:3548: checking if $LN_S -f options work" >&5
+echo $ECHO_N "checking if $LN_S -f options work... $ECHO_C" >&6
+
+rm -f conf$$.src conf$$dst
+echo >conf$$.dst
+echo first >conf$$.src
+if $LN_S -f conf$$.src conf$$.dst 2>/dev/null; then
+ cf_prog_ln_sf=yes
+else
+ cf_prog_ln_sf=no
+fi
+rm -f conf$$.dst conf$$src
+echo "$as_me:3560: result: $cf_prog_ln_sf" >&5
+echo "${ECHO_T}$cf_prog_ln_sf" >&6
+
+test "$cf_prog_ln_sf" = yes && LN_S="$LN_S -f"
+
+echo "$as_me:3565: checking for long file names" >&5
+echo $ECHO_N "checking for long file names... $ECHO_C" >&6
+if test "${ac_cv_sys_long_file_names+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_sys_long_file_names=yes
+# Test for long file names in all the places we know might matter:
+# . the current directory, where building will happen
+# $prefix/lib where we will be installing things
+# $exec_prefix/lib likewise
+# eval it to expand exec_prefix.
+# $TMPDIR if set, where it might want to write temporary files
+# if $TMPDIR is not set:
+# /tmp where it might want to write temporary files
+# /var/tmp likewise
+# /usr/tmp likewise
+if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then
+ ac_tmpdirs=$TMPDIR
+else
+ ac_tmpdirs='/tmp /var/tmp /usr/tmp'
+fi
+for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do
+ test -d $ac_dir || continue
+ test -w $ac_dir || continue # It is less confusing to not echo anything here.
+ ac_xdir=$ac_dir/cf$$
+ (umask 077 && mkdir $ac_xdir 2>/dev/null) || continue
+ ac_tf1=$ac_xdir/conftest9012345
+ ac_tf2=$ac_xdir/conftest9012346
+ (echo 1 >$ac_tf1) 2>/dev/null
+ (echo 2 >$ac_tf2) 2>/dev/null
+ ac_val=`cat $ac_tf1 2>/dev/null`
+ if test ! -f $ac_tf1 || test "$ac_val" != 1; then
+ ac_cv_sys_long_file_names=no
+ rm -rf $ac_xdir 2>/dev/null
+ break
+ fi
+ rm -rf $ac_xdir 2>/dev/null
+done
+fi
+echo "$as_me:3604: result: $ac_cv_sys_long_file_names" >&5
+echo "${ECHO_T}$ac_cv_sys_long_file_names" >&6
+if test $ac_cv_sys_long_file_names = yes; then
+
+cat >>confdefs.h <<\EOF
+#define HAVE_LONG_FILE_NAMES 1
+EOF
+
+fi
+
+# Provide for renaming "ncurses5-config" to "ncurses5X-config", etc., in case
+# of package conflict.
+cf_config_suffix=
+
+# Check whether --with-config-suffix or --without-config-suffix was given.
+if test "${with_config_suffix+set}" = set; then
+ withval="$with_config_suffix"
+ case "x$withval" in
+ (xyes|xno)
+ { echo "$as_me:3623: WARNING: expected a value for config-suffix option" >&5
+echo "$as_me: WARNING: expected a value for config-suffix option" >&2;}
+ ;;
+ (*) cf_config_suffix="$withval"
+ ;;
+ esac
+fi;
+
+# If we find pkg-config, check if we should install the ".pc" files.
+
+echo "$as_me:3633: checking if you want to use pkg-config" >&5
+echo $ECHO_N "checking if you want to use pkg-config... $ECHO_C" >&6
+
+# Check whether --with-pkg-config or --without-pkg-config was given.
+if test "${with_pkg_config+set}" = set; then
+ withval="$with_pkg_config"
+ cf_pkg_config=$withval
+else
+ cf_pkg_config=yes
+fi;
+echo "$as_me:3643: result: $cf_pkg_config" >&5
+echo "${ECHO_T}$cf_pkg_config" >&6
+
+case $cf_pkg_config in
+(no)
+ PKG_CONFIG=none
+ ;;
+(yes)
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+echo "$as_me:3655: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ if $as_executable_p "$ac_dir/$ac_word"; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ echo "$as_me:3672: found $ac_dir/$ac_word" >&5
+ break
+fi
+done
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+
+if test -n "$PKG_CONFIG"; then
+ echo "$as_me:3683: result: $PKG_CONFIG" >&5
+echo "${ECHO_T}$PKG_CONFIG" >&6
+else
+ echo "$as_me:3686: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo "$as_me:3695: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ if $as_executable_p "$ac_dir/$ac_word"; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_dir/$ac_word"
+ echo "$as_me:3712: found $ac_dir/$ac_word" >&5
+ break
+fi
+done
+
+ test -z "$ac_cv_path_ac_pt_PKG_CONFIG" && ac_cv_path_ac_pt_PKG_CONFIG="none"
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+
+if test -n "$ac_pt_PKG_CONFIG"; then
+ echo "$as_me:3724: result: $ac_pt_PKG_CONFIG" >&5
+echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6
+else
+ echo "$as_me:3727: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+ ;;
+(*)
+ PKG_CONFIG=$withval
+ ;;
+esac
+
+test -z "$PKG_CONFIG" && PKG_CONFIG=none
+if test "$PKG_CONFIG" != none ; then
+
+if test "x$prefix" != xNONE; then
+ cf_path_syntax="$prefix"
+else
+ cf_path_syntax="$ac_default_prefix"
+fi
+
+case ".$PKG_CONFIG" in
+(.\$\(*\)*|.\'*\'*)
+ ;;
+(..|./*|.\\*)
+ ;;
+(.[a-zA-Z]:[\\/]*) # OS/2 EMX
+ ;;
+(.\${*prefix}*|.\${*dir}*)
+ eval PKG_CONFIG="$PKG_CONFIG"
+ case ".$PKG_CONFIG" in
+ (.NONE/*)
+ PKG_CONFIG=`echo $PKG_CONFIG | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+ esac
+ ;;
+(.no|.NONE/*)
+ PKG_CONFIG=`echo $PKG_CONFIG | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+(*)
+ { { echo "$as_me:3770: error: expected a pathname, not \"$PKG_CONFIG\"" >&5
+echo "$as_me: error: expected a pathname, not \"$PKG_CONFIG\"" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+elif test "x$cf_pkg_config" != xno ; then
+ { echo "$as_me:3777: WARNING: pkg-config is not installed" >&5
+echo "$as_me: WARNING: pkg-config is not installed" >&2;}
+fi
+
+case $PKG_CONFIG in
+(no|none|yes)
+ echo "$as_me:3783: checking for pkg-config library directory" >&5
+echo $ECHO_N "checking for pkg-config library directory... $ECHO_C" >&6
+ ;;
+(*)
+ echo "$as_me:3787: checking for $PKG_CONFIG library directory" >&5
+echo $ECHO_N "checking for $PKG_CONFIG library directory... $ECHO_C" >&6
+ ;;
+esac
+
+PKG_CONFIG_LIBDIR=no
+
+# Check whether --with-pkg-config-libdir or --without-pkg-config-libdir was given.
+if test "${with_pkg_config_libdir+set}" = set; then
+ withval="$with_pkg_config_libdir"
+ PKG_CONFIG_LIBDIR=$withval
+else
+ test "x$PKG_CONFIG" != xnone && PKG_CONFIG_LIBDIR=yes
+fi;
+
+case x$PKG_CONFIG_LIBDIR in
+(x/*)
+ ;;
+(xyes)
+ # Look for the library directory using the same prefix as the executable
+ if test "x$PKG_CONFIG" = xnone
+ then
+ cf_path=$prefix
+ else
+ cf_path=`echo "$PKG_CONFIG" | sed -e 's,/[^/]*/[^/]*$,,'`
+ fi
+
+ # If you don't like using the default architecture, you have to specify the
+ # intended library directory and corresponding compiler/linker options.
+ #
+ # This case allows for Debian's 2014-flavor of multiarch, along with the
+ # most common variations before that point. Some other variants spell the
+ # directory differently, e.g., "pkg-config", and put it in unusual places.
+ # pkg-config has always been poorly standardized, which is ironic...
+ case x`(arch) 2>/dev/null` in
+ (*64)
+ cf_search_path="\
+ $cf_path/lib/*64-linux-gnu \
+ $cf_path/share \
+ $cf_path/lib64 \
+ $cf_path/lib32 \
+ $cf_path/lib"
+ ;;
+ (*)
+ cf_search_path="\
+ $cf_path/lib/*-linux-gnu \
+ $cf_path/share \
+ $cf_path/lib32 \
+ $cf_path/lib \
+ $cf_path/libdata"
+ ;;
+ esac
+
+ test -n "$verbose" && echo " list..." 1>&6
+
+echo "${as_me:-configure}:3842: testing list... ..." 1>&5
+
+ for cf_config in $cf_search_path
+ do
+ test -n "$verbose" && echo " checking $cf_config/pkgconfig" 1>&6
+
+echo "${as_me:-configure}:3848: testing checking $cf_config/pkgconfig ..." 1>&5
+
+ if test -d $cf_config/pkgconfig
+ then
+ PKG_CONFIG_LIBDIR=$cf_config/pkgconfig
+ echo "$as_me:3853: checking done" >&5
+echo $ECHO_N "checking done... $ECHO_C" >&6
+ break
+ fi
+ done
+ ;;
+(*)
+ ;;
+esac
+
+if test "x$PKG_CONFIG_LIBDIR" != xno ; then
+ echo "$as_me:3864: result: $PKG_CONFIG_LIBDIR" >&5
+echo "${ECHO_T}$PKG_CONFIG_LIBDIR" >&6
+fi
+
+if test "x$PKG_CONFIG" != xnone
+then
+ echo "$as_me:3870: checking if we should install .pc files for $PKG_CONFIG" >&5
+echo $ECHO_N "checking if we should install .pc files for $PKG_CONFIG... $ECHO_C" >&6
+else
+ echo "$as_me:3873: checking if we should install .pc files" >&5
+echo $ECHO_N "checking if we should install .pc files... $ECHO_C" >&6
+fi
+
+# Check whether --enable-pc-files or --disable-pc-files was given.
+if test "${enable_pc_files+set}" = set; then
+ enableval="$enable_pc_files"
+ enable_pc_files=$enableval
+else
+ enable_pc_files=no
+fi;
+echo "$as_me:3884: result: $enable_pc_files" >&5
+echo "${ECHO_T}$enable_pc_files" >&6
+
+if test "x$enable_pc_files" != xno
+then
+ MAKE_PC_FILES=
+ case "x$PKG_CONFIG_LIBDIR" in
+ (xno|xyes)
+ { echo "$as_me:3892: WARNING: no PKG_CONFIG_LIBDIR was found" >&5
+echo "$as_me: WARNING: no PKG_CONFIG_LIBDIR was found" >&2;}
+ ;;
+ (*)
+
+if test "x$prefix" != xNONE; then
+ cf_path_syntax="$prefix"
+else
+ cf_path_syntax="$ac_default_prefix"
+fi
+
+case ".$PKG_CONFIG_LIBDIR" in
+(.\$\(*\)*|.\'*\'*)
+ ;;
+(..|./*|.\\*)
+ ;;
+(.[a-zA-Z]:[\\/]*) # OS/2 EMX
+ ;;
+(.\${*prefix}*|.\${*dir}*)
+ eval PKG_CONFIG_LIBDIR="$PKG_CONFIG_LIBDIR"
+ case ".$PKG_CONFIG_LIBDIR" in
+ (.NONE/*)
+ PKG_CONFIG_LIBDIR=`echo $PKG_CONFIG_LIBDIR | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+ esac
+ ;;
+(.no|.NONE/*)
+ PKG_CONFIG_LIBDIR=`echo $PKG_CONFIG_LIBDIR | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+(*)
+ { { echo "$as_me:3922: error: expected a pathname, not \"$PKG_CONFIG_LIBDIR\"" >&5
+echo "$as_me: error: expected a pathname, not \"$PKG_CONFIG_LIBDIR\"" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+ ;;
+ esac
+else
+ MAKE_PC_FILES="#"
+fi
+
+if test -z "$MAKE_PC_FILES"
+then
+ echo "$as_me:3936: checking for suffix to add to pc-files" >&5
+echo $ECHO_N "checking for suffix to add to pc-files... $ECHO_C" >&6
+
+# Check whether --with-pc-suffix or --without-pc-suffix was given.
+if test "${with_pc_suffix+set}" = set; then
+ withval="$with_pc_suffix"
+ case "x$withval" in
+ (xyes|xno)
+ PC_MODULE_SUFFIX=
+ ;;
+ (*) PC_MODULE_SUFFIX="$withval"
+ ;;
+ esac
+fi;
+ test -z "$PC_MODULE_SUFFIX" && PC_MODULE_SUFFIX=none
+ echo "$as_me:3951: result: $PC_MODULE_SUFFIX" >&5
+echo "${ECHO_T}$PC_MODULE_SUFFIX" >&6
+ test "$PC_MODULE_SUFFIX" = none && PC_MODULE_SUFFIX=
+
+fi
+
+echo "$as_me:3957: checking if we should assume mixed-case filenames" >&5
+echo $ECHO_N "checking if we should assume mixed-case filenames... $ECHO_C" >&6
+
+# Check whether --enable-mixed-case or --disable-mixed-case was given.
+if test "${enable_mixed_case+set}" = set; then
+ enableval="$enable_mixed_case"
+ enable_mixedcase=$enableval
+else
+ enable_mixedcase=auto
+fi;
+echo "$as_me:3967: result: $enable_mixedcase" >&5
+echo "${ECHO_T}$enable_mixedcase" >&6
+if test "$enable_mixedcase" = "auto" ; then
+
+echo "$as_me:3971: checking if filesystem supports mixed-case filenames" >&5
+echo $ECHO_N "checking if filesystem supports mixed-case filenames... $ECHO_C" >&6
+if test "${cf_cv_mixedcase+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+if test "$cross_compiling" = yes ; then
+ case $target_alias in
+ (*-os2-emx*|*-msdosdjgpp*|*-cygwin*|*-msys*|*-mingw*|*-uwin*)
+ cf_cv_mixedcase=no
+ ;;
+ (*)
+ cf_cv_mixedcase=yes
+ ;;
+ esac
+else
+ rm -f conftest CONFTEST
+ echo test >conftest
+ if test -f CONFTEST ; then
+ cf_cv_mixedcase=no
+ else
+ cf_cv_mixedcase=yes
+ fi
+ rm -f conftest CONFTEST
+fi
+
+fi
+echo "$as_me:3998: result: $cf_cv_mixedcase" >&5
+echo "${ECHO_T}$cf_cv_mixedcase" >&6
+test "$cf_cv_mixedcase" = yes &&
+cat >>confdefs.h <<\EOF
+#define MIXEDCASE_FILENAMES 1
+EOF
+
+else
+ cf_cv_mixedcase=$enable_mixedcase
+ if test "x$enable_mixedcase" = "xyes" ; then
+
+cat >>confdefs.h <<\EOF
+#define MIXEDCASE_FILENAMES 1
+EOF
+
+ fi
+fi
+
+# do this after mixed-case option (tags/TAGS is not as important as tic).
+echo "$as_me:4017: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:4037: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:4041: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+for ac_prog in exctags ctags
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:4050: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CTAGS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CTAGS"; then
+ ac_cv_prog_CTAGS="$CTAGS" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_CTAGS="$ac_prog"
+echo "$as_me:4065: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+CTAGS=$ac_cv_prog_CTAGS
+if test -n "$CTAGS"; then
+ echo "$as_me:4073: result: $CTAGS" >&5
+echo "${ECHO_T}$CTAGS" >&6
+else
+ echo "$as_me:4076: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CTAGS" && break
+done
+
+for ac_prog in exetags etags
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:4087: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ETAGS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ETAGS"; then
+ ac_cv_prog_ETAGS="$ETAGS" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ETAGS="$ac_prog"
+echo "$as_me:4102: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+ETAGS=$ac_cv_prog_ETAGS
+if test -n "$ETAGS"; then
+ echo "$as_me:4110: result: $ETAGS" >&5
+echo "${ECHO_T}$ETAGS" >&6
+else
+ echo "$as_me:4113: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ETAGS" && break
+done
+
+# Extract the first word of "${CTAGS:-ctags}", so it can be a program name with args.
+set dummy ${CTAGS:-ctags}; ac_word=$2
+echo "$as_me:4122: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKE_LOWER_TAGS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$MAKE_LOWER_TAGS"; then
+ ac_cv_prog_MAKE_LOWER_TAGS="$MAKE_LOWER_TAGS" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_MAKE_LOWER_TAGS="yes"
+echo "$as_me:4137: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_MAKE_LOWER_TAGS" && ac_cv_prog_MAKE_LOWER_TAGS="no"
+fi
+fi
+MAKE_LOWER_TAGS=$ac_cv_prog_MAKE_LOWER_TAGS
+if test -n "$MAKE_LOWER_TAGS"; then
+ echo "$as_me:4146: result: $MAKE_LOWER_TAGS" >&5
+echo "${ECHO_T}$MAKE_LOWER_TAGS" >&6
+else
+ echo "$as_me:4149: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test "$cf_cv_mixedcase" = yes ; then
+ # Extract the first word of "${ETAGS:-etags}", so it can be a program name with args.
+set dummy ${ETAGS:-etags}; ac_word=$2
+echo "$as_me:4156: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKE_UPPER_TAGS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$MAKE_UPPER_TAGS"; then
+ ac_cv_prog_MAKE_UPPER_TAGS="$MAKE_UPPER_TAGS" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_MAKE_UPPER_TAGS="yes"
+echo "$as_me:4171: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_MAKE_UPPER_TAGS" && ac_cv_prog_MAKE_UPPER_TAGS="no"
+fi
+fi
+MAKE_UPPER_TAGS=$ac_cv_prog_MAKE_UPPER_TAGS
+if test -n "$MAKE_UPPER_TAGS"; then
+ echo "$as_me:4180: result: $MAKE_UPPER_TAGS" >&5
+echo "${ECHO_T}$MAKE_UPPER_TAGS" >&6
+else
+ echo "$as_me:4183: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+else
+ MAKE_UPPER_TAGS=no
+fi
+
+if test "$MAKE_UPPER_TAGS" = yes ; then
+ MAKE_UPPER_TAGS=
+else
+ MAKE_UPPER_TAGS="#"
+fi
+
+if test "$MAKE_LOWER_TAGS" = yes ; then
+ MAKE_LOWER_TAGS=
+else
+ MAKE_LOWER_TAGS="#"
+fi
+
+echo "$as_me:4203: checking for makeflags variable" >&5
+echo $ECHO_N "checking for makeflags variable... $ECHO_C" >&6
+if test "${cf_cv_makeflags+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ cf_cv_makeflags=''
+ for cf_option in '-${MAKEFLAGS}' '${MFLAGS}'
+ do
+ cat >cf_makeflags.tmp <<CF_EOF
+SHELL = $SHELL
+all :
+ @ echo '.$cf_option'
+CF_EOF
+ cf_result=`${MAKE:-make} -k -f cf_makeflags.tmp 2>/dev/null | fgrep -v "ing directory" | sed -e 's,[ ]*$,,'`
+ case "$cf_result" in
+ (.*k|.*kw)
+ cf_result=`${MAKE:-make} -k -f cf_makeflags.tmp CC=cc 2>/dev/null`
+ case "$cf_result" in
+ (.*CC=*) cf_cv_makeflags=
+ ;;
+ (*) cf_cv_makeflags=$cf_option
+ ;;
+ esac
+ break
+ ;;
+ (.-)
+ ;;
+ (*)
+
+echo "${as_me:-configure}:4233: testing given option \"$cf_option\",no match \"$cf_result\" ..." 1>&5
+
+ ;;
+ esac
+ done
+ rm -f cf_makeflags.tmp
+
+fi
+echo "$as_me:4241: result: $cf_cv_makeflags" >&5
+echo "${ECHO_T}$cf_cv_makeflags" >&6
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:4247: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+echo "$as_me:4262: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:4270: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:4273: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:4282: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_RANLIB="ranlib"
+echo "$as_me:4297: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB="':'"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:4306: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:4309: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ld; ac_word=$2
+echo "$as_me:4321: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_LD="${ac_tool_prefix}ld"
+echo "$as_me:4336: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:4344: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:4347: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_LD"; then
+ ac_ct_LD=$LD
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo "$as_me:4356: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_LD"; then
+ ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_LD="ld"
+echo "$as_me:4371: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="ld"
+fi
+fi
+ac_ct_LD=$ac_cv_prog_ac_ct_LD
+if test -n "$ac_ct_LD"; then
+ echo "$as_me:4380: result: $ac_ct_LD" >&5
+echo "${ECHO_T}$ac_ct_LD" >&6
+else
+ echo "$as_me:4383: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ LD=$ac_ct_LD
+else
+ LD="$ac_cv_prog_LD"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:4395: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_AR="${ac_tool_prefix}ar"
+echo "$as_me:4410: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:4418: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:4421: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:4430: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_AR="ar"
+echo "$as_me:4445: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="ar"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:4454: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:4457: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nm; ac_word=$2
+echo "$as_me:4469: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_NM="${ac_tool_prefix}nm"
+echo "$as_me:4484: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:4492: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+else
+ echo "$as_me:4495: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_NM"; then
+ ac_ct_NM=$NM
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo "$as_me:4504: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_NM"; then
+ ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_NM="nm"
+echo "$as_me:4519: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_ac_ct_NM" && ac_cv_prog_ac_ct_NM="nm"
+fi
+fi
+ac_ct_NM=$ac_cv_prog_ac_ct_NM
+if test -n "$ac_ct_NM"; then
+ echo "$as_me:4528: result: $ac_ct_NM" >&5
+echo "${ECHO_T}$ac_ct_NM" >&6
+else
+ echo "$as_me:4531: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ NM=$ac_ct_NM
+else
+ NM="$ac_cv_prog_NM"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:4543: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_AR="${ac_tool_prefix}ar"
+echo "$as_me:4558: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:4566: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:4569: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:4578: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_AR="ar"
+echo "$as_me:4593: found $ac_dir/$ac_word" >&5
+break
+done
+
+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="ar"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:4602: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:4605: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+echo "$as_me:4614: checking for options to update archives" >&5
+echo $ECHO_N "checking for options to update archives... $ECHO_C" >&6
+if test "${cf_cv_ar_flags+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ cf_cv_ar_flags=unknown
+ for cf_ar_flags in -curvU -curv curv -crv crv -cqv cqv -rv rv
+ do
+
+ # check if $ARFLAGS already contains this choice
+ if test "x$ARFLAGS" != "x" ; then
+ cf_check_ar_flags=`echo "x$ARFLAGS" | sed -e "s/$cf_ar_flags\$//" -e "s/$cf_ar_flags / /"`
+ if test "x$ARFLAGS" != "$cf_check_ar_flags" ; then
+ cf_cv_ar_flags=
+ break
+ fi
+ fi
+
+ rm -f conftest.$ac_cv_objext
+ rm -f conftest.a
+
+ cat >conftest.$ac_ext <<EOF
+#line 4637 "configure"
+int testdata[3] = { 123, 456, 789 };
+EOF
+ if { (eval echo "$as_me:4640: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:4643: \$? = $ac_status" >&5
+ (exit $ac_status); } ; then
+ echo "$AR $ARFLAGS $cf_ar_flags conftest.a conftest.$ac_cv_objext" >&5
+ $AR $ARFLAGS $cf_ar_flags conftest.a conftest.$ac_cv_objext 2>&5 1>/dev/null
+ if test -f conftest.a ; then
+ cf_cv_ar_flags=$cf_ar_flags
+ break
+ fi
+ else
+ test -n "$verbose" && echo " cannot compile test-program" 1>&6
+
+echo "${as_me:-configure}:4654: testing cannot compile test-program ..." 1>&5
+
+ break
+ fi
+ done
+ rm -f conftest.a conftest.$ac_ext conftest.$ac_cv_objext
+
+fi
+echo "$as_me:4662: result: $cf_cv_ar_flags" >&5
+echo "${ECHO_T}$cf_cv_ar_flags" >&6
+
+if test -n "$ARFLAGS" ; then
+ if test -n "$cf_cv_ar_flags" ; then
+ ARFLAGS="$ARFLAGS $cf_cv_ar_flags"
+ fi
+else
+ ARFLAGS=$cf_cv_ar_flags
+fi
+
+echo "$as_me:4673: checking if you have specified an install-prefix" >&5
+echo $ECHO_N "checking if you have specified an install-prefix... $ECHO_C" >&6
+
+# Check whether --with-install-prefix or --without-install-prefix was given.
+if test "${with_install_prefix+set}" = set; then
+ withval="$with_install_prefix"
+ case "x$withval" in
+ (xyes|xno)
+ ;;
+ (*) DESTDIR="$withval"
+ ;;
+ esac
+fi;
+echo "$as_me:4686: result: $DESTDIR" >&5
+echo "${ECHO_T}$DESTDIR" >&6
+
+###############################################################################
+
+# If we're cross-compiling, allow the user to override the tools and their
+# options. The configure script is oriented toward identifying the host
+# compiler, etc., but we need a build compiler to generate parts of the source.
+
+if test "$cross_compiling" = yes ; then
+
+ # defaults that we might want to override
+ : ${BUILD_CFLAGS:=''}
+ : ${BUILD_CPPFLAGS:=''}
+ : ${BUILD_LDFLAGS:=''}
+ : ${BUILD_LIBS:=''}
+ : ${BUILD_EXEEXT:='$x'}
+ : ${BUILD_OBJEXT:='o'}
+
+# Check whether --with-build-cc or --without-build-cc was given.
+if test "${with_build_cc+set}" = set; then
+ withval="$with_build_cc"
+ BUILD_CC="$withval"
+else
+ for ac_prog in gcc clang c99 c89 cc cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:4714: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_BUILD_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$BUILD_CC"; then
+ ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_BUILD_CC="$ac_prog"
+echo "$as_me:4729: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+BUILD_CC=$ac_cv_prog_BUILD_CC
+if test -n "$BUILD_CC"; then
+ echo "$as_me:4737: result: $BUILD_CC" >&5
+echo "${ECHO_T}$BUILD_CC" >&6
+else
+ echo "$as_me:4740: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$BUILD_CC" && break
+done
+test -n "$BUILD_CC" || BUILD_CC="none"
+
+fi;
+ echo "$as_me:4749: checking for native build C compiler" >&5
+echo $ECHO_N "checking for native build C compiler... $ECHO_C" >&6
+ echo "$as_me:4751: result: $BUILD_CC" >&5
+echo "${ECHO_T}$BUILD_CC" >&6
+
+ echo "$as_me:4754: checking for native build C preprocessor" >&5
+echo $ECHO_N "checking for native build C preprocessor... $ECHO_C" >&6
+
+# Check whether --with-build-cpp or --without-build-cpp was given.
+if test "${with_build_cpp+set}" = set; then
+ withval="$with_build_cpp"
+ BUILD_CPP="$withval"
+else
+ BUILD_CPP='${BUILD_CC} -E'
+fi;
+ echo "$as_me:4764: result: $BUILD_CPP" >&5
+echo "${ECHO_T}$BUILD_CPP" >&6
+
+ echo "$as_me:4767: checking for native build C flags" >&5
+echo $ECHO_N "checking for native build C flags... $ECHO_C" >&6
+
+# Check whether --with-build-cflags or --without-build-cflags was given.
+if test "${with_build_cflags+set}" = set; then
+ withval="$with_build_cflags"
+ BUILD_CFLAGS="$withval"
+fi;
+ echo "$as_me:4775: result: $BUILD_CFLAGS" >&5
+echo "${ECHO_T}$BUILD_CFLAGS" >&6
+
+ echo "$as_me:4778: checking for native build C preprocessor-flags" >&5
+echo $ECHO_N "checking for native build C preprocessor-flags... $ECHO_C" >&6
+
+# Check whether --with-build-cppflags or --without-build-cppflags was given.
+if test "${with_build_cppflags+set}" = set; then
+ withval="$with_build_cppflags"
+ BUILD_CPPFLAGS="$withval"
+fi;
+ echo "$as_me:4786: result: $BUILD_CPPFLAGS" >&5
+echo "${ECHO_T}$BUILD_CPPFLAGS" >&6
+
+ echo "$as_me:4789: checking for native build linker-flags" >&5
+echo $ECHO_N "checking for native build linker-flags... $ECHO_C" >&6
+
+# Check whether --with-build-ldflags or --without-build-ldflags was given.
+if test "${with_build_ldflags+set}" = set; then
+ withval="$with_build_ldflags"
+ BUILD_LDFLAGS="$withval"
+fi;
+ echo "$as_me:4797: result: $BUILD_LDFLAGS" >&5
+echo "${ECHO_T}$BUILD_LDFLAGS" >&6
+
+ echo "$as_me:4800: checking for native build linker-libraries" >&5
+echo $ECHO_N "checking for native build linker-libraries... $ECHO_C" >&6
+
+# Check whether --with-build-libs or --without-build-libs was given.
+if test "${with_build_libs+set}" = set; then
+ withval="$with_build_libs"
+ BUILD_LIBS="$withval"
+fi;
+ echo "$as_me:4808: result: $BUILD_LIBS" >&5
+echo "${ECHO_T}$BUILD_LIBS" >&6
+
+ # this assumes we're on Unix.
+ BUILD_EXEEXT=
+ BUILD_OBJEXT=o
+
+ : ${BUILD_CC:='${CC}'}
+
+ if ( test "$BUILD_CC" = "$CC" || test "$BUILD_CC" = '${CC}' ) ; then
+ { { echo "$as_me:4818: error: Cross-build requires two compilers.
+Use --with-build-cc to specify the native compiler." >&5
+echo "$as_me: error: Cross-build requires two compilers.
+Use --with-build-cc to specify the native compiler." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+else
+ : ${BUILD_CC:='${CC}'}
+ : ${BUILD_CPP:='${CPP}'}
+ : ${BUILD_CFLAGS:='${CFLAGS}'}
+ : ${BUILD_CPPFLAGS:='${CPPFLAGS}'}
+ : ${BUILD_LDFLAGS:='${LDFLAGS}'}
+ : ${BUILD_LIBS:='${LIBS}'}
+ : ${BUILD_EXEEXT:='$x'}
+ : ${BUILD_OBJEXT:='o'}
+fi
+
+###############################################################################
+
+### Options to allow the user to specify the set of libraries which are used.
+### Use "--without-normal --with-shared" to allow the default model to be
+### shared, for example.
+cf_list_models=""
+
+echo "$as_me:4843: checking if libtool -version-number should be used" >&5
+echo $ECHO_N "checking if libtool -version-number should be used... $ECHO_C" >&6
+
+# Check whether --enable-libtool-version or --disable-libtool-version was given.
+if test "${enable_libtool_version+set}" = set; then
+ enableval="$enable_libtool_version"
+ test "$enableval" != no && enableval=yes
+ if test "$enableval" != "yes" ; then
+ cf_libtool_version=no
+ else
+ cf_libtool_version=yes
+ fi
+else
+ enableval=yes
+ cf_libtool_version=yes
+
+fi;
+echo "$as_me:4860: result: $cf_libtool_version" >&5
+echo "${ECHO_T}$cf_libtool_version" >&6
+
+if test "$cf_libtool_version" = yes ; then
+ LIBTOOL_VERSION="-version-number"
+else
+ LIBTOOL_VERSION="-version-info"
+ case "x$VERSION" in
+ (x)
+ { echo "$as_me:4869: WARNING: VERSION was not set" >&5
+echo "$as_me: WARNING: VERSION was not set" >&2;}
+ ;;
+ (x*.*.*)
+ ABI_VERSION="$VERSION"
+ test -n "$verbose" && echo " ABI_VERSION: $ABI_VERSION" 1>&6
+
+echo "${as_me:-configure}:4876: testing ABI_VERSION: $ABI_VERSION ..." 1>&5
+
+ ;;
+ (x*:*:*)
+ ABI_VERSION=`echo "$VERSION" | sed -e 's/:/./g'`
+ test -n "$verbose" && echo " ABI_VERSION: $ABI_VERSION" 1>&6
+
+echo "${as_me:-configure}:4883: testing ABI_VERSION: $ABI_VERSION ..." 1>&5
+
+ ;;
+ (*)
+ { echo "$as_me:4887: WARNING: unexpected VERSION value: $VERSION" >&5
+echo "$as_me: WARNING: unexpected VERSION value: $VERSION" >&2;}
+ ;;
+ esac
+fi
+
+LIBTOOL=
+
+# common library maintenance symbols that are convenient for libtool scripts:
+LIB_CREATE='${AR} -cr'
+LIB_OBJECT='${OBJECTS}'
+LIB_SUFFIX=.a
+LIB_PREP="$RANLIB"
+
+# symbols used to prop libtool up to enable it to determine what it should be
+# doing:
+LIB_CLEAN=
+LIB_COMPILE=
+LIB_LINK='${CC}'
+LIB_INSTALL=
+LIB_UNINSTALL=
+
+echo "$as_me:4909: checking if you want to build libraries with libtool" >&5
+echo $ECHO_N "checking if you want to build libraries with libtool... $ECHO_C" >&6
+
+# Check whether --with-libtool or --without-libtool was given.
+if test "${with_libtool+set}" = set; then
+ withval="$with_libtool"
+ with_libtool=$withval
+else
+ with_libtool=no
+fi;
+echo "$as_me:4919: result: $with_libtool" >&5
+echo "${ECHO_T}$with_libtool" >&6
+if test "$with_libtool" != "no"; then
+
+ if test "$with_libtool" != "yes" ; then
+
+if test "x$prefix" != xNONE; then
+ cf_path_syntax="$prefix"
+else
+ cf_path_syntax="$ac_default_prefix"
+fi
+
+case ".$with_libtool" in
+(.\$\(*\)*|.\'*\'*)
+ ;;
+(..|./*|.\\*)
+ ;;
+(.[a-zA-Z]:[\\/]*) # OS/2 EMX
+ ;;
+(.\${*prefix}*|.\${*dir}*)
+ eval with_libtool="$with_libtool"
+ case ".$with_libtool" in
+ (.NONE/*)
+ with_libtool=`echo $with_libtool | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+ esac
+ ;;
+(.no|.NONE/*)
+ with_libtool=`echo $with_libtool | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+(*)
+ { { echo "$as_me:4950: error: expected a pathname, not \"$with_libtool\"" >&5
+echo "$as_me: error: expected a pathname, not \"$with_libtool\"" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+ LIBTOOL=$with_libtool
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in libtool glibtool
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:4963: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIBTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIBTOOL"; then
+ ac_cv_prog_LIBTOOL="$LIBTOOL" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_LIBTOOL="$ac_tool_prefix$ac_prog"
+echo "$as_me:4978: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+LIBTOOL=$ac_cv_prog_LIBTOOL
+if test -n "$LIBTOOL"; then
+ echo "$as_me:4986: result: $LIBTOOL" >&5
+echo "${ECHO_T}$LIBTOOL" >&6
+else
+ echo "$as_me:4989: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$LIBTOOL" && break
+ done
+fi
+if test -z "$LIBTOOL"; then
+ ac_ct_LIBTOOL=$LIBTOOL
+ for ac_prog in libtool glibtool
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:5002: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_LIBTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_LIBTOOL"; then
+ ac_cv_prog_ac_ct_LIBTOOL="$ac_ct_LIBTOOL" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_LIBTOOL="$ac_prog"
+echo "$as_me:5017: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+ac_ct_LIBTOOL=$ac_cv_prog_ac_ct_LIBTOOL
+if test -n "$ac_ct_LIBTOOL"; then
+ echo "$as_me:5025: result: $ac_ct_LIBTOOL" >&5
+echo "${ECHO_T}$ac_ct_LIBTOOL" >&6
+else
+ echo "$as_me:5028: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_LIBTOOL" && break
+done
+test -n "$ac_ct_LIBTOOL" || ac_ct_LIBTOOL="none"
+
+ LIBTOOL=$ac_ct_LIBTOOL
+fi
+
+if test -n "$LIBTOOL" && test "$LIBTOOL" != none
+then
+ cf_cv_libtool_version=`$LIBTOOL --version 2>&1 | sed -e '/^$/d' |sed -e '2,$d' -e 's/([^)]*)//g' -e 's/^[^1-9]*//' -e 's/[^0-9.].*//'`
+else
+ cf_cv_libtool_version=
+fi
+test -z "$cf_cv_libtool_version" && unset cf_cv_libtool_version
+
+ if test -z "$cf_cv_libtool_version" && test "$LIBTOOL" = libtool
+ then
+
+unset ac_cv_prog_ac_ct_LIBTOOL
+unset ac_ct_LIBTOOL
+unset LIBTOOL
+
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in glibtool
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:5059: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIBTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIBTOOL"; then
+ ac_cv_prog_LIBTOOL="$LIBTOOL" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_LIBTOOL="$ac_tool_prefix$ac_prog"
+echo "$as_me:5074: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+LIBTOOL=$ac_cv_prog_LIBTOOL
+if test -n "$LIBTOOL"; then
+ echo "$as_me:5082: result: $LIBTOOL" >&5
+echo "${ECHO_T}$LIBTOOL" >&6
+else
+ echo "$as_me:5085: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$LIBTOOL" && break
+ done
+fi
+if test -z "$LIBTOOL"; then
+ ac_ct_LIBTOOL=$LIBTOOL
+ for ac_prog in glibtool
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:5098: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_LIBTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_LIBTOOL"; then
+ ac_cv_prog_ac_ct_LIBTOOL="$ac_ct_LIBTOOL" # Let the user override the test.
+else
+ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+ IFS=$ac_save_IFS
+ test -z "$ac_dir" && ac_dir=.
+ $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_LIBTOOL="$ac_prog"
+echo "$as_me:5113: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+ac_ct_LIBTOOL=$ac_cv_prog_ac_ct_LIBTOOL
+if test -n "$ac_ct_LIBTOOL"; then
+ echo "$as_me:5121: result: $ac_ct_LIBTOOL" >&5
+echo "${ECHO_T}$ac_ct_LIBTOOL" >&6
+else
+ echo "$as_me:5124: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_LIBTOOL" && break
+done
+test -n "$ac_ct_LIBTOOL" || ac_ct_LIBTOOL="none"
+
+ LIBTOOL=$ac_ct_LIBTOOL
+fi
+
+if test -n "$LIBTOOL" && test "$LIBTOOL" != none
+then
+ cf_cv_libtool_version=`$LIBTOOL --version 2>&1 | sed -e '/^$/d' |sed -e '2,$d' -e 's/([^)]*)//g' -e 's/^[^1-9]*//' -e 's/[^0-9.].*//'`
+else
+ cf_cv_libtool_version=
+fi
+test -z "$cf_cv_libtool_version" && unset cf_cv_libtool_version
+
+ fi
+ fi
+ if test -z "$LIBTOOL" ; then
+ { { echo "$as_me:5146: error: Cannot find libtool" >&5
+echo "$as_me: error: Cannot find libtool" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ LIB_CREATE='${LIBTOOL} --mode=link ${CC} -rpath ${libdir} ${LIBTOOL_VERSION} `cut -f1 ${top_srcdir}/VERSION` ${LIBTOOL_OPTS} ${LT_UNDEF} $(LIBS) -o'
+ LIB_OBJECT='${OBJECTS:.o=.lo}'
+ LIB_SUFFIX=.la
+ LIB_CLEAN='${LIBTOOL} --mode=clean'
+ LIB_COMPILE='${LIBTOOL} --mode=compile'
+ LIB_LINK='${LIBTOOL} --mode=link ${CC} ${LIBTOOL_OPTS}'
+ LIB_INSTALL='${LIBTOOL} --mode=install'
+ LIB_UNINSTALL='${LIBTOOL} --mode=uninstall'
+ LIB_PREP=:
+
+if test -n "$LIBTOOL" && test "$LIBTOOL" != none
+then
+ echo "$as_me:5162: checking version of $LIBTOOL" >&5
+echo $ECHO_N "checking version of $LIBTOOL... $ECHO_C" >&6
+
+if test -n "$LIBTOOL" && test "$LIBTOOL" != none
+then
+ cf_cv_libtool_version=`$LIBTOOL --version 2>&1 | sed -e '/^$/d' |sed -e '2,$d' -e 's/([^)]*)//g' -e 's/^[^1-9]*//' -e 's/[^0-9.].*//'`
+else
+ cf_cv_libtool_version=
+fi
+test -z "$cf_cv_libtool_version" && unset cf_cv_libtool_version
+
+ echo "$as_me:5173: result: $cf_cv_libtool_version" >&5
+echo "${ECHO_T}$cf_cv_libtool_version" >&6
+ if test -z "$cf_cv_libtool_version" ; then
+ { { echo "$as_me:5176: error: This is not GNU libtool" >&5
+echo "$as_me: error: This is not GNU libtool" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+else
+ { { echo "$as_me:5181: error: GNU libtool has not been found" >&5
+echo "$as_me: error: GNU libtool has not been found" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ # special hack to add -no-undefined (which libtool should do for itself)
+ LT_UNDEF=
+ case "$cf_cv_system_name" in
+ (cygwin*|msys*|mingw32*|os2*|uwin*|aix[4-7])
+ LT_UNDEF=-no-undefined
+ ;;
+ esac
+
+ # special hack to add --tag option for C++ compiler
+ case $cf_cv_libtool_version in
+ (1.[5-9]*|[2-9].[0-9.a-z]*)
+ LIBTOOL_CXX="$LIBTOOL --tag=CXX"
+ LIBTOOL="$LIBTOOL --tag=CC"
+ ;;
+ (*)
+ LIBTOOL_CXX="$LIBTOOL"
+ ;;
+ esac
+else
+ LIBTOOL=""
+ LIBTOOL_CXX=""
+fi
+
+test -z "$LIBTOOL" && ECHO_LT=
+
+if test "$with_libtool" != "no" ; then
+
+cf_list_models="$cf_list_models libtool"
+
+else
+
+echo "$as_me:5217: checking if you want to build shared libraries" >&5
+echo $ECHO_N "checking if you want to build shared libraries... $ECHO_C" >&6
+
+# Check whether --with-shared or --without-shared was given.
+if test "${with_shared+set}" = set; then
+ withval="$with_shared"
+ with_shared=$withval
+else
+ with_shared=no
+fi;
+echo "$as_me:5227: result: $with_shared" >&5
+echo "${ECHO_T}$with_shared" >&6
+test "x$with_shared" = "xyes" && cf_list_models="$cf_list_models shared"
+
+echo "$as_me:5231: checking if you want to build static libraries" >&5
+echo $ECHO_N "checking if you want to build static libraries... $ECHO_C" >&6
+
+# Check whether --with-normal or --without-normal was given.
+if test "${with_normal+set}" = set; then
+ withval="$with_normal"
+ with_normal=$withval
+else
+ with_normal=yes
+fi;
+echo "$as_me:5241: result: $with_normal" >&5
+echo "${ECHO_T}$with_normal" >&6
+test "x$with_normal" = "xyes" && cf_list_models="$cf_list_models normal"
+
+echo "$as_me:5245: checking if you want to build debug libraries" >&5
+echo $ECHO_N "checking if you want to build debug libraries... $ECHO_C" >&6
+
+# Check whether --with-debug or --without-debug was given.
+if test "${with_debug+set}" = set; then
+ withval="$with_debug"
+ with_debug=$withval
+else
+ with_debug=yes
+fi;
+echo "$as_me:5255: result: $with_debug" >&5
+echo "${ECHO_T}$with_debug" >&6
+test "x$with_debug" = "xyes" && cf_list_models="$cf_list_models debug"
+
+echo "$as_me:5259: checking if you want to build profiling libraries" >&5
+echo $ECHO_N "checking if you want to build profiling libraries... $ECHO_C" >&6
+
+# Check whether --with-profile or --without-profile was given.
+if test "${with_profile+set}" = set; then
+ withval="$with_profile"
+ with_profile=$withval
+else
+ with_profile=no
+fi;
+echo "$as_me:5269: result: $with_profile" >&5
+echo "${ECHO_T}$with_profile" >&6
+test "x$with_profile" = "xyes" && cf_list_models="$cf_list_models profile"
+
+fi
+
+if test "X$cf_with_cxx_binding" != Xno; then
+if test "x$with_shared" = "xyes"; then
+echo "$as_me:5277: checking if you want to build C++ shared libraries" >&5
+echo $ECHO_N "checking if you want to build C++ shared libraries... $ECHO_C" >&6
+
+# Check whether --with-cxx-shared or --without-cxx-shared was given.
+if test "${with_cxx_shared+set}" = set; then
+ withval="$with_cxx_shared"
+ with_shared_cxx=$withval
+else
+ with_shared_cxx=no
+fi;
+echo "$as_me:5287: result: $with_shared_cxx" >&5
+echo "${ECHO_T}$with_shared_cxx" >&6
+fi
+fi
+
+###############################################################################
+
+echo "$as_me:5294: checking for specified models" >&5
+echo $ECHO_N "checking for specified models... $ECHO_C" >&6
+test -z "$cf_list_models" && cf_list_models=normal
+test "$with_libtool" != "no" && cf_list_models=libtool
+echo "$as_me:5298: result: $cf_list_models" >&5
+echo "${ECHO_T}$cf_list_models" >&6
+
+### Use the first model as the default, and save its suffix for use in building
+### up test-applications.
+echo "$as_me:5303: checking for default model" >&5
+echo $ECHO_N "checking for default model... $ECHO_C" >&6
+DFT_LWR_MODEL=`echo "$cf_list_models" | $AWK '{print $1}'`
+echo "$as_me:5306: result: $DFT_LWR_MODEL" >&5
+echo "${ECHO_T}$DFT_LWR_MODEL" >&6
+
+DFT_UPR_MODEL=`echo "$DFT_LWR_MODEL" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
+
+TICS_NAME=tic
+
+TINFO_NAME=tinfo
+
+LIB_NAME=ncurses
+
+LIB_DIR=../lib
+LIB_2ND=../../lib
+
+echo "$as_me:5320: checking if you want to have a library-prefix" >&5
+echo $ECHO_N "checking if you want to have a library-prefix... $ECHO_C" >&6
+
+# Check whether --with-lib-prefix or --without-lib-prefix was given.
+if test "${with_lib_prefix+set}" = set; then
+ withval="$with_lib_prefix"
+ with_lib_prefix=$withval
+else
+ with_lib_prefix=auto
+fi;
+echo "$as_me:5330: result: $with_lib_prefix" >&5
+echo "${ECHO_T}$with_lib_prefix" >&6
+
+if test $with_lib_prefix = auto
+then
+
+ case $cf_cv_system_name in
+ (OS/2*|os2*)
+ if test "$DFT_LWR_MODEL" = libtool; then
+ LIB_PREFIX='lib'
+ else
+ LIB_PREFIX=''
+ fi
+ ;;
+ (*) LIB_PREFIX='lib'
+ ;;
+ esac
+cf_prefix=$LIB_PREFIX
+
+elif test $with_lib_prefix = no
+then
+ LIB_PREFIX=
+else
+ LIB_PREFIX=$with_lib_prefix
+fi
+
+LIB_SUFFIX=
+
+ echo "$as_me:5358: checking for PATH separator" >&5
+echo $ECHO_N "checking for PATH separator... $ECHO_C" >&6
+ case $cf_cv_system_name in
+ (os2*) PATH_SEPARATOR=';' ;;
+ (*) ${PATH_SEPARATOR:=':'} ;;
+ esac
+
+ echo "$as_me:5365: result: $PATH_SEPARATOR" >&5
+echo "${ECHO_T}$PATH_SEPARATOR" >&6
+
+###############################################################################
+
+echo "$as_me:5370: checking if you want to build a separate terminfo library" >&5
+echo $ECHO_N "checking if you want to build a separate terminfo library... $ECHO_C" >&6
+
+# Check whether --with-termlib or --without-termlib was given.
+if test "${with_termlib+set}" = set; then
+ withval="$with_termlib"
+ with_termlib=$withval
+else
+ with_termlib=no
+fi;
+echo "$as_me:5380: result: $with_termlib" >&5
+echo "${ECHO_T}$with_termlib" >&6
+
+echo "$as_me:5383: checking if you want to build a separate tic library" >&5
+echo $ECHO_N "checking if you want to build a separate tic library... $ECHO_C" >&6
+
+# Check whether --with-ticlib or --without-ticlib was given.
+if test "${with_ticlib+set}" = set; then
+ withval="$with_ticlib"
+ with_ticlib=$withval
+else
+ with_ticlib=no
+fi;
+echo "$as_me:5393: result: $with_ticlib" >&5
+echo "${ECHO_T}$with_ticlib" >&6
+
+if test X"$CC_G_OPT" = X"" ; then
+ CC_G_OPT='-g'
+ test -n "$GCC" && test "x${ac_cv_prog_cc_g}" != xyes && CC_G_OPT=''
+fi
+
+if test X"$CXX_G_OPT" = X"" ; then
+ CXX_G_OPT='-g'
+ test -n "$GXX" && test "x${ac_cv_prog_cxx_g}" != xyes && CXX_G_OPT=''
+fi
+
+echo "$as_me:5406: checking for default loader flags" >&5
+echo $ECHO_N "checking for default loader flags... $ECHO_C" >&6
+case $DFT_LWR_MODEL in
+(libtool) LD_MODEL='' ;;
+(normal) LD_MODEL='' ;;
+(debug) LD_MODEL=$CC_G_OPT ;;
+(profile) LD_MODEL='-pg';;
+(shared) LD_MODEL='' ;;
+esac
+echo "$as_me:5415: result: $LD_MODEL" >&5
+echo "${ECHO_T}$LD_MODEL" >&6
+
+case $DFT_LWR_MODEL in
+(shared)
+
+echo "$as_me:5421: checking if rpath option should be used" >&5
+echo $ECHO_N "checking if rpath option should be used... $ECHO_C" >&6
+
+# Check whether --enable-rpath or --disable-rpath was given.
+if test "${enable_rpath+set}" = set; then
+ enableval="$enable_rpath"
+ cf_cv_enable_rpath=$enableval
+else
+ cf_cv_enable_rpath=no
+fi;
+echo "$as_me:5431: result: $cf_cv_enable_rpath" >&5
+echo "${ECHO_T}$cf_cv_enable_rpath" >&6
+
+echo "$as_me:5434: checking if shared libraries should be relinked during install" >&5
+echo $ECHO_N "checking if shared libraries should be relinked during install... $ECHO_C" >&6
+
+# Check whether --enable-relink or --disable-relink was given.
+if test "${enable_relink+set}" = set; then
+ enableval="$enable_relink"
+ cf_cv_do_relink=$enableval
+else
+ cf_cv_do_relink=yes
+fi;
+echo "$as_me:5444: result: $cf_cv_do_relink" >&5
+echo "${ECHO_T}$cf_cv_do_relink" >&6
+ ;;
+esac
+
+# we will build libraries one-level down.
+rel_builddir=..
+
+LD_RPATH_OPT=
+if test "x$cf_cv_enable_rpath" != xno
+then
+ echo "$as_me:5455: checking for an rpath option" >&5
+echo $ECHO_N "checking for an rpath option... $ECHO_C" >&6
+ case $cf_cv_system_name in
+ (irix*)
+ if test "$GCC" = yes; then
+ LD_RPATH_OPT="-Wl,-rpath,"
+ else
+ LD_RPATH_OPT="-rpath "
+ fi
+ ;;
+ (linux*|gnu*|k*bsd*-gnu|freebsd*)
+ LD_RPATH_OPT="-Wl,-rpath,"
+ ;;
+ (openbsd[2-9].*|mirbsd*)
+ LD_RPATH_OPT="-Wl,-rpath,"
+ ;;
+ (dragonfly*)
+ LD_RPATH_OPT="-rpath "
+ ;;
+ (netbsd*)
+ LD_RPATH_OPT="-Wl,-rpath,"
+ ;;
+ (osf*|mls+*)
+ LD_RPATH_OPT="-rpath "
+ ;;
+ (solaris2*)
+ LD_RPATH_OPT="-R"
+ ;;
+ (*)
+ ;;
+ esac
+ echo "$as_me:5486: result: $LD_RPATH_OPT" >&5
+echo "${ECHO_T}$LD_RPATH_OPT" >&6
+
+ case "x$LD_RPATH_OPT" in
+ (x-R*)
+ echo "$as_me:5491: checking if we need a space after rpath option" >&5
+echo $ECHO_N "checking if we need a space after rpath option... $ECHO_C" >&6
+ cf_save_LIBS="$LIBS"
+
+cf_add_libs="${LD_RPATH_OPT}$libdir"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"