<!--
* t
****************************************************************************
- * Copyright (c) 1998-2013,2015 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2015,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: curs_util.3x,v 1.42 2015/04/26 14:27:03 Sven.Joachim Exp @
+ * @Id: curs_util.3x,v 1.48 2017/04/22 14:05:14 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
-</PRE>
-<H2><a name="h2-NAME">NAME</a></H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
<STRONG>delay_output</STRONG>, <STRONG>filter</STRONG>, <STRONG>flushinp</STRONG>, <STRONG>getwin</STRONG>, <STRONG>key_name</STRONG>, <STRONG>keyname</STRONG>,
<STRONG>nofilter</STRONG>, <STRONG>putwin</STRONG>, <STRONG>unctrl</STRONG>, <STRONG>use_env</STRONG>, <STRONG>use_tioctl</STRONG>, <STRONG>wunctrl</STRONG> -
miscellaneous <STRONG>curses</STRONG> utility routines
-</PRE>
-<H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
<STRONG>#include</STRONG> <STRONG><curses.h></STRONG>
<STRONG>char</STRONG> <STRONG>*unctrl(chtype</STRONG> <STRONG>c);</STRONG>
<STRONG>int</STRONG> <STRONG>flushinp(void);</STRONG>
-</PRE>
-<H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
+
+</PRE><H3><a name="h3-unctrl">unctrl</a></H3><PRE>
The <STRONG>unctrl</STRONG> routine returns a character string which is a
printable representation of the character <EM>c</EM>, ignoring at-
tributes. Control characters are displayed in the <STRONG>^</STRONG><EM>X</EM> no-
corresponding <STRONG>wunctrl</STRONG> returns a printable representation
of a wide character.
+
+</PRE><H3><a name="h3-keyname_key_name">keyname/key_name</a></H3><PRE>
The <STRONG>keyname</STRONG> routine returns a character string correspond-
ing to the key <EM>c</EM>:
<STRONG>o</STRONG> DEL (character 127) is displayed as <STRONG>^?</STRONG>.
<STRONG>o</STRONG> Values above 128 are either meta characters (if the
- screen has not been initialized, or if <STRONG>meta</STRONG> has been
- called with a <STRONG>TRUE</STRONG> parameter), shown in the <STRONG>M-</STRONG><EM>X</EM> nota-
- tion, or are displayed as themselves. In the latter
- case, the values may not be printable; this follows
- the X/Open specification.
+ screen has not been initialized, or if <STRONG><A HREF="curs_inopts.3x.html">meta(3x)</A></STRONG> has
+ been called with a <STRONG>TRUE</STRONG> parameter), shown in the <STRONG>M-</STRONG><EM>X</EM>
+ notation, or are displayed as themselves. In the lat-
+ ter case, the values may not be printable; this fol-
+ lows the X/Open specification.
<STRONG>o</STRONG> Values above 256 may be the names of the names of
function keys.
returns null where the former would display a meta charac-
ter.
+
+</PRE><H3><a name="h3-filter_nofilter">filter/nofilter</a></H3><PRE>
The <STRONG>filter</STRONG> routine, if used, must be called before <STRONG>initscr</STRONG>
or <STRONG>newterm</STRONG> are called. The effect is that, during those
calls, <STRONG>LINES</STRONG> is set to 1; the capabilities <STRONG>clear</STRONG>, <STRONG>cup</STRONG>,
<STRONG>$TERM</STRONG>. The limitation arises because the <STRONG>filter</STRONG> routine
modifies the in-memory copy of the terminal information.
+
+</PRE><H3><a name="h3-use_env">use_env</a></H3><PRE>
The <STRONG>use_env</STRONG> routine, if used, should be called before
<STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> are called (because those compute the
screen size). It modifies the way <STRONG>ncurses</STRONG> treats environ-
ment variables when determining the screen size.
- <STRONG>o</STRONG> Normally ncurses looks first at the terminal database
+ <STRONG>o</STRONG> Normally <STRONG>ncurses</STRONG> looks first at the terminal database
for the screen size.
If <STRONG>use_env</STRONG> was called with <STRONG>FALSE</STRONG> for parameter, it
the terminal database.
<STRONG>o</STRONG> Finally (unless <STRONG>use_env</STRONG> was called with <STRONG>FALSE</STRONG> parame-
- ter), ncurses examines the <STRONG>LINES</STRONG> or <STRONG>COLUMNS</STRONG> environ-
+ ter), <STRONG>ncurses</STRONG> examines the <STRONG>LINES</STRONG> or <STRONG>COLUMNS</STRONG> environ-
ment variables, using a value in those to override the
results from the operating system or terminal data-
base.
- Ncurses also updates the screen size in response to
+ <STRONG>Ncurses</STRONG> also updates the screen size in response to
SIGWINCH, unless overridden by the <STRONG>LINES</STRONG> or <STRONG>COLUMNS</STRONG>
environment variables,
+
+</PRE><H3><a name="h3-use_tioctl">use_tioctl</a></H3><PRE>
The <STRONG>use_tioctl</STRONG> routine, if used, should be called before
<STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> are called (because those compute the
screen size). After <STRONG>use_tioctl</STRONG> is called with <STRONG>TRUE</STRONG> as an
- argument, ncurses modifies the last step in its computa-
+ argument, <STRONG>ncurses</STRONG> modifies the last step in its computa-
tion of screen size as follows:
<STRONG>o</STRONG> checks if the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment variables
are set to a number greater than zero.
- <STRONG>o</STRONG> for each, ncurses updates the corresponding environ-
+ <STRONG>o</STRONG> for each, <STRONG>ncurses</STRONG> updates the corresponding environ-
ment variable with the value that it has obtained via
operating system call or from the terminal database.
- <STRONG>o</STRONG> ncurses re-fetches the value of the environment vari-
+ <STRONG>o</STRONG> <STRONG>ncurses</STRONG> re-fetches the value of the environment vari-
ables so that it is still the environment variables
which set the screen size.
<EM>use</EM><STRONG>_</STRONG><EM>env</EM> <EM>use</EM><STRONG>_</STRONG><EM>tioctl</EM> <EM>Summary</EM>
----------------------------------------------------------------
- TRUE FALSE This is the default behavior. ncurses
+
+
+
+ TRUE FALSE This is the default behavior. <STRONG>ncurses</STRONG>
uses operating system calls unless over-
ridden by $LINES or $COLUMNS environment
variables.
- TRUE TRUE ncurses updates $LINES and $COLUMNS
+ TRUE TRUE <STRONG>ncurses</STRONG> updates $LINES and $COLUMNS
based on operating system calls.
-
-
- FALSE TRUE ncurses ignores $LINES and $COLUMNS, us-
+ FALSE TRUE <STRONG>ncurses</STRONG> ignores $LINES and $COLUMNS, us-
es operating system calls to obtain
size.
- FALSE FALSE ncurses relies on the terminal database
+ FALSE FALSE <STRONG>ncurses</STRONG> relies on the terminal database
to determine size.
+
+</PRE><H3><a name="h3-putwin_getwin">putwin/getwin</a></H3><PRE>
The <STRONG>putwin</STRONG> routine writes all data associated with window
(or pad) <EM>win</EM> into the file to which <EM>filep</EM> points. This
information can be later retrieved using the <STRONG>getwin</STRONG> func-
been created in the application using <STRONG>init_pair</STRONG>, they
will not be colored when the window is refreshed.
+
+</PRE><H3><a name="h3-delay_output">delay_output</a></H3><PRE>
The <STRONG>delay_output</STRONG> routine inserts an <EM>ms</EM> millisecond pause
in output. This routine should not be used extensively
because padding characters are used rather than a CPU
pause. If no padding character is specified, this uses
<STRONG>napms</STRONG> to perform the delay.
+
+</PRE><H3><a name="h3-flushinp">flushinp</a></H3><PRE>
The <STRONG>flushinp</STRONG> routine throws away any typeahead that has
been typed by the user and has not yet been read by the
program.
-</PRE>
-<H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
+</PRE><H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
Except for <STRONG>flushinp</STRONG>, routines that return an integer re-
turn <STRONG>ERR</STRONG> upon failure and <STRONG>OK</STRONG> (SVr4 specifies only "an in-
teger value other than <STRONG>ERR</STRONG>") upon successful completion.
returns an error if the terminal was not initial-
ized.
- <STRONG>meta</STRONG> returns an error if the terminal was not initial-
- ized.
-
<STRONG>putwin</STRONG>
- returns an error if the associated <STRONG>fwrite</STRONG> calls
+ returns an error if the associated <STRONG>fwrite</STRONG> calls
return an error.
-</PRE>
-<H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
+</PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
-</PRE>
-<H3><a name="h3-filter">filter</a></H3><PRE>
+</PRE><H3><a name="h3-filter">filter</a></H3><PRE>
The SVr4 documentation describes the action of <STRONG>filter</STRONG> only
- in the vaguest terms. The description here is adapted
- from the XSI Curses standard (which erroneously fails to
+ in the vaguest terms. The description here is adapted
+ from the XSI Curses standard (which erroneously fails to
describe the disabling of <STRONG>cuu</STRONG>).
-</PRE>
-<H3><a name="h3-keyname">keyname</a></H3><PRE>
- The <STRONG>keyname</STRONG> function may return the names of user-defined
- string capabilities which are defined in the terminfo en-
- try via the <STRONG>-x</STRONG> option of <STRONG>tic</STRONG>. This implementation auto-
- matically assigns at run-time keycodes to user-defined
- strings which begin with "k". The keycodes start at
- KEY_MAX, but are not guaranteed to be the same value for
- different runs because user-defined codes are merged from
- all terminal descriptions which have been loaded. The
- <STRONG>use_extended_names</STRONG> function controls whether this data is
- loaded when the terminal description is read by the li-
+</PRE><H3><a name="h3-keyname">keyname</a></H3><PRE>
+ The <STRONG>keyname</STRONG> function may return the names of user-defined
+ string capabilities which are defined in the terminfo en-
+ try via the <STRONG>-x</STRONG> option of <STRONG>tic</STRONG>. This implementation auto-
+ matically assigns at run-time keycodes to user-defined
+ strings which begin with "k". The keycodes start at
+ KEY_MAX, but are not guaranteed to be the same value for
+ different runs because user-defined codes are merged from
+ all terminal descriptions which have been loaded. The
+ <STRONG><A HREF="curs_extend.3x.html">use_extended_names(3x)</A></STRONG> function controls whether this data
+ is loaded when the terminal description is read by the li-
brary.
-</PRE>
-<H3><a name="h3-nofilter_use_tioctl">nofilter/use_tioctl</a></H3><PRE>
- The <STRONG>nofilter</STRONG> and <STRONG>use_tioctl</STRONG> routines are specific to
- ncurses. They were not supported on Version 7, BSD or
+</PRE><H3><a name="h3-nofilter_use_tioctl">nofilter/use_tioctl</a></H3><PRE>
+ The <STRONG>nofilter</STRONG> and <STRONG>use_tioctl</STRONG> routines are specific to
+ <STRONG>ncurses</STRONG>. They were not supported on Version 7, BSD or
System V implementations. It is recommended that any code
- depending on ncurses extensions be conditioned using
+ depending on <STRONG>ncurses</STRONG> extensions be conditioned using
NCURSES_VERSION.
-</PRE>
-<H3><a name="h3-putwin_getwin">putwin/getwin</a></H3><PRE>
- The <STRONG>putwin</STRONG> and <STRONG>getwin</STRONG> functions have several issues with
+</PRE><H3><a name="h3-putwin_getwin">putwin/getwin</a></H3><PRE>
+ The <STRONG>putwin</STRONG> and <STRONG>getwin</STRONG> functions have several issues with
portability:
- <STRONG>o</STRONG> The files written and read by these functions use an
- implementation-specific format. Although the format
- is an obvious target for standardization, it has been
+ <STRONG>o</STRONG> The files written and read by these functions use an
+ implementation-specific format. Although the format
+ is an obvious target for standardization, it has been
overlooked.
Interestingly enough, according to the copyright dates
in Solaris source, the functions (along with <STRONG>scr_init</STRONG>,
- etc.) originated with the University of California,
- Berkeley (in 1982) and were later (in 1988) incorpo-
- rated into SVr4. Oddly, there are no such functions
+ etc.) originated with the University of California,
+ Berkeley (in 1982) and were later (in 1988) incorpo-
+ rated into SVr4. Oddly, there are no such functions
in the 4.3BSD curses sources.
- <STRONG>o</STRONG> Most implementations simply dump the binary <STRONG>WINDOW</STRONG>
- structure to the file. These include SVr4 curses,
- NetBSD and PDCurses, as well as older ncurses ver-
- sions. This implementation (as well as the X/Open
- variant of Solaris curses, dated 1995) uses textual
+ <STRONG>o</STRONG> Most implementations simply dump the binary <STRONG>WINDOW</STRONG>
+ structure to the file. These include SVr4 curses,
+ NetBSD and PDCurses, as well as older <STRONG>ncurses</STRONG> ver-
+ sions. This implementation (as well as the X/Open
+ variant of Solaris curses, dated 1995) uses textual
dumps.
- The implementations which use binary dumps use block-
- I/O (the <STRONG>fwrite</STRONG> and <STRONG>fread</STRONG> functions). Those that use
- textual dumps use buffered-I/O. A few applications
+ The implementations which use binary dumps use block-
+ I/O (the <STRONG>fwrite</STRONG> and <STRONG>fread</STRONG> functions). Those that use
+ textual dumps use buffered-I/O. A few applications
may happen to write extra data in the file using these
- functions. Doing that can run into problems mixing
- block- and buffered-I/O. This implementation reduces
- the problem on writes by flushing the output. Howev-
- er, reading from a file written using mixed schemes
+ functions. Doing that can run into problems mixing
+ block- and buffered-I/O. This implementation reduces
+ the problem on writes by flushing the output. Howev-
+ er, reading from a file written using mixed schemes
may not be successful.
-</PRE>
-<H3><a name="h3-unctrl_wunctrl">unctrl/wunctrl</a></H3><PRE>
- The XSI Curses standard, Issue 4 describes these func-
- tions. It states that <STRONG>unctrl</STRONG> and <STRONG>wunctrl</STRONG> will return a
- null pointer if unsuccessful, but does not define any er-
+</PRE><H3><a name="h3-unctrl_wunctrl">unctrl/wunctrl</a></H3><PRE>
+ The XSI Curses standard, Issue 4 describes these func-
+ tions. It states that <STRONG>unctrl</STRONG> and <STRONG>wunctrl</STRONG> will return a
+ null pointer if unsuccessful, but does not define any er-
ror conditions. This implementation checks for three cas-
es:
- <STRONG>o</STRONG> the parameter is a 7-bit US-ASCII code. This is the
+ <STRONG>o</STRONG> the parameter is a 7-bit US-ASCII code. This is the
case that X/Open Curses documented.
<STRONG>o</STRONG> the parameter is in the range 128-159, i.e., a C1 con-
- trol code. If <STRONG>use_legacy_coding</STRONG> has been called with
- a <STRONG>2</STRONG> parameter, <STRONG>unctrl</STRONG> returns the parameter, i.e., a
- one-character string with the parameter as the first
- character. Otherwise, it returns "~@", "~A", etc.,
+ trol code. If <STRONG>use_legacy_coding</STRONG> has been called with
+ a <STRONG>2</STRONG> parameter, <STRONG>unctrl</STRONG> returns the parameter, i.e., a
+ one-character string with the parameter as the first
+ character. Otherwise, it returns "~@", "~A", etc.,
analogous to "^@", "^A", C0 controls.
- X/Open Curses does not document whether <STRONG>unctrl</STRONG> can be
- called before initializing curses. This implementa-
- tion permits that, and returns the "~@", etc., values
+ X/Open Curses does not document whether <STRONG>unctrl</STRONG> can be
+ called before initializing curses. This implementa-
+ tion permits that, and returns the "~@", etc., values
in that case.
- <STRONG>o</STRONG> parameter values outside the 0 to 255 range. <STRONG>unctrl</STRONG>
+ <STRONG>o</STRONG> parameter values outside the 0 to 255 range. <STRONG>unctrl</STRONG>
returns a null pointer.
- The strings returned by <STRONG>unctrl</STRONG> in this implementation are
- determined at compile time, showing C1 controls from the
- upper-128 codes with a `~' prefix rather than `^'. Other
- implementations have different conventions. For example,
- they may show both sets of control characters with `^',
- and strip the parameter to 7 bits. Or they may ignore C1
- controls and treat all of the upper-128 codes as print-
+ The strings returned by <STRONG>unctrl</STRONG> in this implementation are
+ determined at compile time, showing C1 controls from the
+ upper-128 codes with a "~" prefix rather than "^". Other
+ implementations have different conventions. For example,
+ they may show both sets of control characters with "^",
+ and strip the parameter to 7 bits. Or they may ignore C1
+ controls and treat all of the upper-128 codes as print-
able. This implementation uses 8 bits but does not modify
the string to reflect locale. The <STRONG>use_legacy_coding</STRONG> func-
tion allows the caller to change the output of <STRONG>unctrl</STRONG>.
- Likewise, the <STRONG>meta</STRONG> function allows the caller to change
- the output of <STRONG>keyname</STRONG>, i.e., it determines whether to use
- the `M-' prefix for "meta" keys (codes in the range 128 to
- 255). Both <STRONG>use_legacy_coding</STRONG> and <STRONG>meta</STRONG> succeed only after
- curses is initialized. X/Open Curses does not document
- the treatment of codes 128 to 159. When treating them as
- "meta" keys (or if <STRONG>keyname</STRONG> is called before initializing
- curses), this implementation returns strings "M-^@",
- "M-^A", etc.
+ Likewise, the <STRONG><A HREF="curs_inopts.3x.html">meta(3x)</A></STRONG> function allows the caller to
+ change the output of <STRONG>keyname</STRONG>, i.e., it determines whether
+ to use the "M-" prefix for "meta" keys (codes in the range
+ 128 to 255). Both <STRONG>use_legacy_coding</STRONG> and <STRONG>meta</STRONG> succeed only
+ after curses is initialized. X/Open Curses does not docu-
+ ment the treatment of codes 128 to 159. When treating
+ them as "meta" keys (or if <STRONG>keyname</STRONG> is called before ini-
+ tializing curses), this implementation returns strings
+ "M-^@", "M-^A", etc.
-</PRE>
-<H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG>curs_ker-</STRONG>
- <STRONG><A HREF="curs_kernel.3x.html">nel(3x)</A></STRONG>, <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>, <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>, <STRONG>lega-</STRONG>
- <STRONG><A HREF="legacy_coding.3x.html">cy_coding(3x)</A></STRONG>.
+</PRE><H3><a name="h3-use_env_use_tioctl">use_env/use_tioctl</a></H3><PRE>
+ If <STRONG>ncurses</STRONG> is configured to provide the sp-functions ex-
+ tension, the state of <STRONG>use_env</STRONG> and <STRONG>use_tioctl</STRONG> may be updat-
+ ed before creating each <EM>screen</EM> rather than once only
+ (<STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG>). This feature of <STRONG>use_env</STRONG> is not pro-
+ vided by other implementation of curses.
+
+
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+ <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG>curs_in-</STRONG>
+ <STRONG><A HREF="curs_inopts.3x.html">opts(3x)</A></STRONG>, <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>, <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>,
+ <STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG>, <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>, <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>.
<ul>
<li><a href="#h2-NAME">NAME</a></li>
<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
-<li><a href="#h2-DESCRIPTION">DESCRIPTION</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-unctrl">unctrl</a></li>
+<li><a href="#h3-keyname_key_name">keyname/key_name</a></li>
+<li><a href="#h3-filter_nofilter">filter/nofilter</a></li>
+<li><a href="#h3-use_env">use_env</a></li>
+<li><a href="#h3-use_tioctl">use_tioctl</a></li>
+<li><a href="#h3-putwin_getwin">putwin/getwin</a></li>
+<li><a href="#h3-delay_output">delay_output</a></li>
+<li><a href="#h3-flushinp">flushinp</a></li>
+</ul>
+</li>
<li><a href="#h2-RETURN-VALUE">RETURN VALUE</a></li>
<li><a href="#h2-PORTABILITY">PORTABILITY</a>
<ul>
<li><a href="#h3-nofilter_use_tioctl">nofilter/use_tioctl</a></li>
<li><a href="#h3-putwin_getwin">putwin/getwin</a></li>
<li><a href="#h3-unctrl_wunctrl">unctrl/wunctrl</a></li>
+<li><a href="#h3-use_env_use_tioctl">use_env/use_tioctl</a></li>
</ul>
</li>
<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>