<!--
****************************************************************************
- * Copyright (c) 2008-2018,2019 Free Software Foundation, Inc. *
+ * Copyright 2018-2019,2020 Thomas E. Dickey *
+ * Copyright 2008-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: tabs.1,v 1.26 2019/06/23 21:01:12 tom Exp @
+ * @Id: tabs.1,v 1.28 2020/12/19 21:50:22 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
stty tab0
Like <STRONG><A HREF="clear.1.html">clear(1)</A></STRONG>, <STRONG>tabs</STRONG> writes to the standard output. You can redirect
- the standard output to a file (which prevents <STRONG>tabs</STRONG> from actually chang-
- ing the tabstops), and later <STRONG>cat</STRONG> the file to the screen, setting tab-
- stops at that point.
-
- These are hardware tabs, which cannot be queried rapidly by applica-
- tions running in the terminal, if at all. Curses and other full-screen
- applications may use hardware tabs in optimizing their output to the
- terminal. If the hardware tabstops differ from the information in the
- terminal database, the result is unpredictable. Before running curses
- programs, you should either reset tab-stops to the standard interval
+ the standard output to a file (which prevents <STRONG>tabs</STRONG> from actually
+ changing the tabstops), and later <STRONG>cat</STRONG> the file to the screen, setting
+ tabstops at that point.
+
+ These are hardware tabs, which cannot be queried rapidly by
+ applications running in the terminal, if at all. Curses and other
+ full-screen applications may use hardware tabs in optimizing their
+ output to the terminal. If the hardware tabstops differ from the
+ information in the terminal database, the result is unpredictable.
+ Before running curses programs, you should either reset tab-stops to
+ the standard interval
tabs -8
- or use the <STRONG>reset</STRONG> program, since the normal initialization sequences do
+ or use the <STRONG>reset</STRONG> program, since the normal initialization sequences do
not ensure that tab-stops are reset.
</PRE><H3><a name="h3-General-Options">General Options</a></H3><PRE>
<STRONG>-T</STRONG><EM>name</EM>
- Tell <STRONG>tabs</STRONG> which terminal type to use. If this option is not
- given, <STRONG>tabs</STRONG> will use the <STRONG>$TERM</STRONG> environment variable. If that is
+ Tell <STRONG>tabs</STRONG> which terminal type to use. If this option is not
+ given, <STRONG>tabs</STRONG> will use the <STRONG>$TERM</STRONG> environment variable. If that is
not set, it will use the <EM>ansi+tabs</EM> entry.
- <STRONG>-d</STRONG> The debugging option shows a ruler line, followed by two data
- lines. The first data line shows the expected tab-stops marked
- with asterisks. The second data line shows the actual tab-stops,
+ <STRONG>-d</STRONG> The debugging option shows a ruler line, followed by two data
+ lines. The first data line shows the expected tab-stops marked
+ with asterisks. The second data line shows the actual tab-stops,
marked with asterisks.
- <STRONG>-n</STRONG> This option tells <STRONG>tabs</STRONG> to check the options and run any debugging
+ <STRONG>-n</STRONG> This option tells <STRONG>tabs</STRONG> to check the options and run any debugging
option, but not to modify the terminal settings.
<STRONG>-V</STRONG> reports the version of ncurses which was used in this program, and
exits.
The <STRONG>tabs</STRONG> program processes a single list of tab stops. The last option
- to be processed which defines a list is the one that determines the
+ to be processed which defines a list is the one that determines the
list to be processed.
</PRE><H3><a name="h3-Implicit-Lists">Implicit Lists</a></H3><PRE>
- Use a single number as an option, e.g., "<STRONG>-5</STRONG>" to set tabs at the given
- interval (in this case 1, 6, 11, 16, 21, etc.). Tabs are repeated up
+ Use a single number as an option, e.g., "<STRONG>-5</STRONG>" to set tabs at the given
+ interval (in this case 1, 6, 11, 16, 21, etc.). Tabs are repeated up
to the right margin of the screen.
Use "<STRONG>-0</STRONG>" to clear all tabs.
</PRE><H3><a name="h3-Explicit-Lists">Explicit Lists</a></H3><PRE>
- An explicit list can be defined after the options (this does not use a
- "-"). The values in the list must be in increasing numeric order, and
- greater than zero. They are separated by a comma or a blank, for exam-
- ple,
+ An explicit list can be defined after the options (this does not use a
+ "-"). The values in the list must be in increasing numeric order, and
+ greater than zero. They are separated by a comma or a blank, for
+ example,
tabs 1,6,11,16,21
tabs 1 6 11 16 21
- Use a "+" to treat a number as an increment relative to the previous
+ Use a "+" to treat a number as an increment relative to the previous
value, e.g.,
tabs 1,+5,+5,+5,+5
</PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
- <EM>IEEE</EM> <EM>Std</EM> <EM>1003.1/The</EM> <EM>Open</EM> <EM>Group</EM> <EM>Base</EM> <EM>Specifications</EM> <EM>Issue</EM> <EM>7</EM>
+ <EM>IEEE</EM> <EM>Std</EM> <EM>1003.1/The</EM> <EM>Open</EM> <EM>Group</EM> <EM>Base</EM> <EM>Specifications</EM> <EM>Issue</EM> <EM>7</EM>
(POSIX.1-2008) describes a <STRONG>tabs</STRONG> utility. However
- <STRONG>o</STRONG> This standard describes a <STRONG>+m</STRONG> option, to set a terminal's left-mar-
- gin. Very few of the entries in the terminal database provide the
- <STRONG>smgl</STRONG> (<STRONG>set_left_margin</STRONG>) or <STRONG>smglp</STRONG> (<STRONG>set_left_margin_parm</STRONG>) capability
- needed to support the feature.
+ <STRONG>o</STRONG> This standard describes a <STRONG>+m</STRONG> option, to set a terminal's left-
+ margin. Very few of the entries in the terminal database provide
+ the <STRONG>smgl</STRONG> (<STRONG>set_left_margin</STRONG>) or <STRONG>smglp</STRONG> (<STRONG>set_left_margin_parm</STRONG>)
+ capability needed to support the feature.
- <STRONG>o</STRONG> There is no counterpart in X/Open Curses Issue 7 for this utility,
+ <STRONG>o</STRONG> There is no counterpart in X/Open Curses Issue 7 for this utility,
unlike <STRONG>tput(1)</STRONG>.
- The <STRONG>-d</STRONG> (debug) and <STRONG>-n</STRONG> (no-op) options are extensions not provided by
+ The <STRONG>-d</STRONG> (debug) and <STRONG>-n</STRONG> (no-op) options are extensions not provided by
other implementations.
- A <STRONG>tabs</STRONG> utility appeared in PWB/Unix 1.0 (1977). There was a reduced
- version of the <STRONG>tabs</STRONG> utility in Unix 7th edition and in 3BSD (1979).
- The latter supported a single "-n" option (to cause the first tab stop
+ A <STRONG>tabs</STRONG> utility appeared in PWB/Unix 1.0 (1977). There was a reduced
+ version of the <STRONG>tabs</STRONG> utility in Unix 7th edition and in 3BSD (1979).
+ The latter supported a single "-n" option (to cause the first tab stop
to be set on the left margin). That option is not documented by POSIX.
- The PWB/Unix <STRONG>tabs</STRONG> utility, which was included in System III (1980),
- used built-in tables rather than the terminal database, to support a
- half-dozen terminal types. It also had built-in logic to support the
- left-margin, as well as a feature for copying the tab settings from a
+ The PWB/Unix <STRONG>tabs</STRONG> utility, which was included in System III (1980),
+ used built-in tables rather than the terminal database, to support a
+ half-dozen terminal types. It also had built-in logic to support the
+ left-margin, as well as a feature for copying the tab settings from a
file.
- Later versions of Unix, e.g., SVr4, added support for the terminal
- database, but kept the tables, as a fallback. In an earlier develop-
- ment effort, the tab-stop initialization provided by <STRONG>tset</STRONG> (1982) and
- incorporated into <STRONG>tput</STRONG> uses the terminal database,
+ Later versions of Unix, e.g., SVr4, added support for the terminal
+ database, but kept the tables, as a fallback. In an earlier
+ development effort, the tab-stop initialization provided by <STRONG>tset</STRONG> (1982)
+ and incorporated into <STRONG>tput</STRONG> uses the terminal database,
- POSIX documents no limits on the number of tab stops. Documentation
+ POSIX documents no limits on the number of tab stops. Documentation
for other implementations states that there is a limit on the number of
- tab stops (e.g., 20 in PWB/Unix's <STRONG>tabs</STRONG> utility). While some terminals
- may not accept an arbitrary number of tab stops, this implementation
- will attempt to set tab stops up to the right margin of the screen, if
+ tab stops (e.g., 20 in PWB/Unix's <STRONG>tabs</STRONG> utility). While some terminals
+ may not accept an arbitrary number of tab stops, this implementation
+ will attempt to set tab stops up to the right margin of the screen, if
the given list happens to be that long.
- The <EM>Rationale</EM> section of the POSIX documentation goes into some detail
- about the ways the committee considered redesigning the <STRONG>tabs</STRONG> and <STRONG>tput</STRONG>
+ The <EM>Rationale</EM> section of the POSIX documentation goes into some detail
+ about the ways the committee considered redesigning the <STRONG>tabs</STRONG> and <STRONG>tput</STRONG>
utilities, without proposing an improved solution. It comments that
- no known historical version of tabs supports the capability of
+ no known historical version of tabs supports the capability of
setting arbitrary tab stops.
- However, the <EM>Explicit</EM> <EM>Lists</EM> described in this manual page were imple-
- mented in PWB/Unix. Those provide the capability of setting abitrary
- tab stops.
+ However, the <EM>Explicit</EM> <EM>Lists</EM> described in this manual page were
+ implemented in PWB/Unix. Those provide the capability of setting
+ abitrary tab stops.
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="
tset.1.html">tset(1)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
+ <STRONG><A HREF="
infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="tset.1.html">tset(1)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
- This describes <STRONG>ncurses</STRONG> version 6.1 (patch 20190727).
+ This describes <STRONG>ncurses</STRONG> version 6.2 (patch 20210109).
projects / ncurses.git / blobdiff