-<!--
+<!--
* t
* DO NOT EDIT THIS FILE BY HAND!
* It is generated from terminfo.head, ./../include/Caps ./../include/Caps-ncurses, and terminfo.tail.
* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright 2018-2019,2020 Thomas E. Dickey *
+ * Copyright 2018-2020,2021 Thomas E. Dickey *
* Copyright 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.39 2020/02/02 23:34:34 tom Exp @
+ * @Id: terminfo.head,v 1.40 2021/06/17 21:30:22 tom Exp @
* Head of terminfo man page ends here
****************************************************************************
- * Copyright 2018-2019,2020 Thomas E. Dickey *
+ * Copyright 2018-2020,2021 Thomas E. Dickey *
* Copyright 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.tail,v 1.100 2020/12/19 21:51:22 tom Exp @
+ * @Id: terminfo.tail,v 1.101 2021/06/17 21:30:22 tom Exp @
*.in -2
*.in +2
*.in -2
<BODY>
<H1 class="no-header">terminfo 5 File Formats</H1>
<PRE>
-<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> File Formats <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
+<B><A HREF="terminfo.5.html">terminfo(5)</A></B> File Formats <B><A HREF="terminfo.5.html">terminfo(5)</A></B>
</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
- <EM>Terminfo</EM> is a data base describing terminals, used by screen-oriented
- programs such as <STRONG>nvi(1)</STRONG>, <STRONG>lynx(1)</STRONG>, <STRONG>mutt(1)</STRONG>, and other curses
- applications, using high-level calls to libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>.
+ <I>Terminfo</I> is a data base describing terminals, used by screen-oriented
+ programs such as <B>nvi(1)</B>, <B>lynx(1)</B>, <B>mutt(1)</B>, and other curses
+ applications, using high-level calls to libraries such as <B><A HREF="curses.3X.html">curses(3X)</A></B>.
It is also used via low-level calls by non-curses applications which
- may be screen-oriented (such as <STRONG><A HREF="clear.1.html">clear(1)</A></STRONG>) or non-screen (such as
- <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>).
+ may be screen-oriented (such as <B><A HREF="clear.1.html">clear(1)</A></B>) or non-screen (such as
+ <B><A HREF="tabs.1.html">tabs(1)</A></B>).
- <EM>Terminfo</EM> describes terminals by giving a set of capabilities which they
+ <I>Terminfo</I> describes terminals by giving a set of capabilities which they
have, by specifying how to perform screen operations, and by specifying
padding requirements and initialization sequences.
- This manual describes <STRONG>ncurses</STRONG> version 6.2 (patch 20210522).
+ This manual describes <B>ncurses</B> version 6.2 (patch 20210612).
</PRE><H3><a name="h3-Terminfo-Entry-Syntax">Terminfo Entry Syntax</a></H3><PRE>
- Entries in <EM>terminfo</EM> consist of a sequence of fields:
+ Entries in <I>terminfo</I> consist of a sequence of fields:
- <STRONG>o</STRONG> Each field ends with a comma "," (embedded commas may be escaped
+ <B>o</B> Each field ends with a comma "," (embedded commas may be escaped
with a backslash or written as "\054").
- <STRONG>o</STRONG> White space between fields is ignored.
+ <B>o</B> White space between fields is ignored.
- <STRONG>o</STRONG> The first field in a <EM>terminfo</EM> entry begins in the first column.
+ <B>o</B> The first field in a <I>terminfo</I> entry begins in the first column.
- <STRONG>o</STRONG> Newlines and leading whitespace (spaces or tabs) may be used for
+ <B>o</B> Newlines and leading whitespace (spaces or tabs) may be used for
formatting entries for readability. These are removed from parsed
entries.
- The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> and <STRONG>-W</STRONG> options rely on this to format if-then-else
+ The <B>infocmp</B> <B>-f</B> and <B>-W</B> options rely on this to format if-then-else
expressions, or to enforce maximum line-width. The resulting
- formatted terminal description can be read by <STRONG>tic</STRONG>.
+ formatted terminal description can be read by <B>tic</B>.
- <STRONG>o</STRONG> The first field for each terminal gives the names which are known
+ <B>o</B> The first field for each terminal gives the names which are known
for the terminal, separated by "|" characters.
The first name given is the most common abbreviation for the
terminal (its primary name), the last name given should be a long
- name fully identifying the terminal (see <STRONG><A HREF="curs_termattrs.3x.html">longname(3x)</A></STRONG>), and all
+ name fully identifying the terminal (see <B><A HREF="curs_termattrs.3X.html">longname(3X)</A></B>), and all
others are treated as synonyms (aliases) for the primary terminal
name.
it allows that to be both an alias and a verbose name (but will
warn about this ambiguity).
- <STRONG>o</STRONG> Lines beginning with a "#" in the first column are treated as
+ <B>o</B> Lines beginning with a "#" in the first column are treated as
comments.
- While comment lines are legal at any point, the output of <STRONG>captoinfo</STRONG>
- and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>) will move comments so they occur
+ While comment lines are legal at any point, the output of <B>captoinfo</B>
+ and <B>infotocap</B> (aliases for <B>tic</B>) will move comments so they occur
only between entries.
Terminal names (except for the last, verbose entry) should be chosen
suffix. Thus, a vt100 in 132-column mode would be vt100-w. The
following suffixes should be used where possible:
- <STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
- -<EM>nn</EM> Number of lines on the screen aaa-60
- -<EM>n</EM>p Number of pages of memory c100-4p
+ <B>Suffix</B> <B>Meaning</B> <B>Example</B>
+ -<I>nn</I> Number of lines on the screen aaa-60
+ -<I>n</I>p Number of pages of memory c100-4p
-am With automargins (usually the default) vt100-am
-m Mono mode; suppress color ansi-m
-mc Magic cookie; spaces when highlighting wy30-mc
-vb Use visible bell instead of beep wy370-vb
-w Wide mode (> 80 columns, usually 132) vt100-w
- For more on terminal naming conventions, see the <STRONG><A HREF="term.7.html">term(7)</A></STRONG> manual page.
+ For more on terminal naming conventions, see the <B><A HREF="term.7.html">term(7)</A></B> manual page.
</PRE><H3><a name="h3-Terminfo-Capabilities-Syntax">Terminfo Capabilities Syntax</a></H3><PRE>
- The terminfo entry consists of several <EM>capabilities</EM>, i.e., features
+ The terminfo entry consists of several <I>capabilities</I>, i.e., features
that the terminal has, or methods for exercising the terminal's
features.
After the first field (giving the name(s) of the terminal entry), there
- should be one or more <EM>capability</EM> fields. These are boolean, numeric or
+ should be one or more <I>capability</I> fields. These are boolean, numeric or
string names with corresponding values:
- <STRONG>o</STRONG> Boolean capabilities are true when present, false when absent.
+ <B>o</B> Boolean capabilities are true when present, false when absent.
There is no explicit value for boolean capabilities.
- <STRONG>o</STRONG> Numeric capabilities have a "#" following the name, then an
+ <B>o</B> Numeric capabilities have a "#" following the name, then an
unsigned decimal integer value.
- <STRONG>o</STRONG> String capabilities have a "=" following the name, then an string
+ <B>o</B> String capabilities have a "=" following the name, then an string
of characters making up the capability value.
String capabilities can be split into multiple lines, just as the
within a string value are retained, except for leading blanks on a
line.
- Any capability can be <EM>canceled</EM>, i.e., suppressed from the terminal
+ Any capability can be <I>canceled</I>, i.e., suppressed from the terminal
entry, by following its name with "@" rather than a capability value.
If there are two very similar terminals, one (the variant) can be
defined as being just like the other (the base) with certain
exceptions. In the definition of the variant, the string capability
- <STRONG>use</STRONG> can be given with the name of the base terminal:
+ <B>use</B> can be given with the name of the base terminal:
- <STRONG>o</STRONG> The capabilities given before <STRONG>use</STRONG> override those in the base type
- named by <STRONG>use</STRONG>.
+ <B>o</B> The capabilities given before <B>use</B> override those in the base type
+ named by <B>use</B>.
- <STRONG>o</STRONG> If there are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
- order. That is, the rightmost <STRONG>use</STRONG> reference is processed first,
+ <B>o</B> If there are multiple <B>use</B> capabilities, they are merged in reverse
+ order. That is, the rightmost <B>use</B> reference is processed first,
then the one to its left, and so forth.
- <STRONG>o</STRONG> Capabilities given explicitly in the entry override those brought
- in by <STRONG>use</STRONG> references.
+ <B>o</B> Capabilities given explicitly in the entry override those brought
+ in by <B>use</B> references.
- A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of the use
- reference that imports it, where <EM>xx</EM> is the capability. For example,
+ A capability can be canceled by placing <B>xx@</B> to the left of the use
+ reference that imports it, where <I>xx</I> is the capability. For example,
the entry
2621-nl, smkx@, rmkx@, use=2621,
- defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG> capabilities, and
+ defines a 2621-nl that does not have the <B>smkx</B> or <B>rmkx</B> capabilities, and
hence does not turn on the function key labels when in visual mode.
This is useful for different modes for a terminal, or for different
user preferences.
- An entry included via <STRONG>use</STRONG> can contain canceled capabilities, which have
+ An entry included via <B>use</B> can contain canceled capabilities, which have
the same effect as if those cancels were inline in the using terminal
entry.
terminfo description block and available to terminfo-using code. In
each line of the table,
- The <STRONG>variable</STRONG> is the name by which the programmer (at the terminfo
+ The <B>variable</B> is the name by which the programmer (at the terminfo
level) accesses the capability.
- The <STRONG>capname</STRONG> is the short name used in the text of the database, and is
+ The <B>capname</B> is the short name used in the text of the database, and is
used by a person updating the database. Whenever possible, capnames
are chosen to be the same as or similar to the ANSI X3.64-1979 standard
(now superseded by ECMA-48, which uses identical or very similar
names). Semantics are also intended to match those of the
specification.
- The termcap code is the old <STRONG>termcap</STRONG> capability name (some capabilities
+ The termcap code is the old <B>termcap</B> capability name (some capabilities
are new, and have names which termcap did not originate).
Capability names have no hard length limit, but an informal limit of 5
characters has been adopted to keep them short and to allow the tabs in
- the source file <STRONG>Caps</STRONG> to line up nicely.
+ the source file <B>Caps</B> to line up nicely.
Finally, the description field attempts to convey the semantics of the
capability. You may find some codes in the description field:
(P) indicates that padding may be specified
#[1-9] in the description field indicates that the string is passed
- through <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG> with parameters as given (#<EM>i</EM>).
+ through <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B> with parameters as given (#<I>i</I>).
If no parameters are listed in the description, passing the
- string through <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG> may give unexpected results, e.g., if
+ string through <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B> may give unexpected results, e.g., if
it contains percent (%%) signs.
(P*) indicates that padding may vary in proportion to the number of
lines affected
- (#<EM>i</EM>) indicates the <EM>i</EM>th parameter.
+ (#<I>i</I>) indicates the <I>i</I>th parameter.
These are the boolean capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>Booleans</B> <B>name</B> <B>Code</B>
These are the numeric capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>Numeric</B> <B>name</B> <B>Code</B>
columns cols co number of columns in
a line
init_tabs it it tabs initially every
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>Numeric</B> <B>name</B> <B>Code</B>
bit_image_entwining bitwin Yo number of passes for
each bit-image row
bit_image_type bitype Yp type of bit-image
These are the string capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>String</B> <B>name</B> <B>Code</B>
acs_chars acsc ac graphics charset
pairs, based on
vt100
structure, but were originally not documented in the man page.
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>String</B> <B>name</B> <B>Code</B>
alt_scancode_esc scesa S8 Alternate escape
for scancode
emulation
The XSI Curses standard added these hardcopy capabilities. They were
used in some post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. Except for <STRONG>YI</STRONG>, the <STRONG>ncurses</STRONG> termcap names for them are
+ and IRIX 6.x. Except for <B>YI</B>, the <B>ncurses</B> termcap names for them are
invented. According to the XSI Curses standard, they have no termcap
names. If your compiled terminfo entries use these, they may not be
binary-compatible with System V terminfo entries after SVr4.1; beware!
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
+ <B>String</B> <B>name</B> <B>Code</B>
enter_horizontal_hl_mode ehhlm Xh Enter horizontal
highlight mode
enter_left_hl_mode elhlm Xl Enter left highlight
</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
- The preceding section listed the <EM>predefined</EM> capabilities. They deal
+ The preceding section listed the <I>predefined</I> capabilities. They deal
with some special features for terminals no longer (or possibly never)
produced. Occasionally there are special features of newer terminals
which are awkward or impossible to represent by reusing the predefined
capabilities.
- <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
- capabilities. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG> option for
- this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats unknown capabilities as user-
- defined. That is, if <STRONG>tic</STRONG> encounters a capability name which it does
+ <B>ncurses</B> addresses this limitation by allowing user-defined
+ capabilities. The <B>tic</B> and <B>infocmp</B> programs provide the <B>-x</B> option for
+ this purpose. When <B>-x</B> is set, <B>tic</B> treats unknown capabilities as user-
+ defined. That is, if <B>tic</B> encounters a capability name which it does
not recognize, it infers its type (boolean, number or string) from the
syntax and makes an extended table entry for that capability. The
- <STRONG><A HREF="curs_extend.3x.html">use_extended_names(3x)</A></STRONG> function makes this information conditionally
+ <B><A HREF="curs_extend.3X.html">use_extended_names(3X)</A></B> function makes this information conditionally
available to applications. The ncurses library provides the data
leaving most of the behavior to applications:
- <STRONG>o</STRONG> User-defined capability strings whose name begins with "k" are
+ <B>o</B> User-defined capability strings whose name begins with "k" are
treated as function keys.
- <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG> can be
- inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
+ <B>o</B> The types (boolean, number, string) determined by <B>tic</B> can be
+ inferred by successful calls on <B>tigetflag</B>, etc.
- <STRONG>o</STRONG> If the capability name happens to be two characters, the capability
+ <B>o</B> If the capability name happens to be two characters, the capability
is also available through the termcap interface.
While termcap is said to be extensible because it does not use a
</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
The following entry, describing an ANSI-standard terminal, is
- representative of what a <STRONG>terminfo</STRONG> entry for a modern terminal typically
+ representative of what a <B>terminfo</B> entry for a modern terminal typically
looks like.
ansi|ansi/pc-term compatible with color,
Entries may continue onto multiple lines by placing white space at the
beginning of each line except the first. Comments may be included on
- lines beginning with "#". Capabilities in <EM>terminfo</EM> are of three types:
+ lines beginning with "#". Capabilities in <I>terminfo</I> are of three types:
- <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal has some
+ <B>o</B> Boolean capabilities which indicate that the terminal has some
particular feature,
- <STRONG>o</STRONG> numeric capabilities giving the size of the terminal or the size of
+ <B>o</B> numeric capabilities giving the size of the terminal or the size of
particular delays, and
- <STRONG>o</STRONG> string capabilities, which give a sequence which can be used to
+ <B>o</B> string capabilities, which give a sequence which can be used to
perform particular terminal operations.
</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
All capabilities have names. For instance, the fact that ANSI-standard
- terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an automatic return and line-
+ terminals have <I>automatic</I> <I>margins</I> (i.e., an automatic return and line-
feed when the end of a line is reached) is indicated by the capability
- <STRONG>am</STRONG>. Hence the description of ansi includes <STRONG>am</STRONG>. Numeric capabilities
+ <B>am</B>. Hence the description of ansi includes <B>am</B>. Numeric capabilities
are followed by the character "#" and then a positive value. Thus
- <STRONG>cols</STRONG>, which indicates the number of columns the terminal has, gives the
+ <B>cols</B>, which indicates the number of columns the terminal has, gives the
value "80" for ansi. Values for numeric capabilities may be specified
in decimal, octal or hexadecimal, using the C programming language
conventions (e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to end of line
+ Finally, string valued capabilities, such as <B>el</B> (clear to end of line
sequence) are given by the two-character code, an "=", and then a
string ending at the next following ",".
A number of escape sequences are provided in the string valued
capabilities for easy encoding of characters there:
- <STRONG>o</STRONG> Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character,
+ <B>o</B> Both <B>\E</B> and <B>\e</B> map to an ESCAPE character,
- <STRONG>o</STRONG> <STRONG>^x</STRONG> maps to a control-x for any appropriate <EM>x</EM>, and
+ <B>o</B> <B>^x</B> maps to a control-x for any appropriate <I>x</I>, and
- <STRONG>o</STRONG> the sequences
+ <B>o</B> the sequences
- <STRONG>\n</STRONG>, <STRONG>\l</STRONG>, <STRONG>\r</STRONG>, <STRONG>\t</STRONG>, <STRONG>\b</STRONG>, <STRONG>\f</STRONG>, and <STRONG>\s</STRONG>
+ <B>\n</B>, <B>\l</B>, <B>\r</B>, <B>\t</B>, <B>\b</B>, <B>\f</B>, and <B>\s</B>
produce
- <EM>newline</EM>, <EM>line-feed</EM>, <EM>return</EM>, <EM>tab</EM>, <EM>backspace</EM>, <EM>form-feed</EM>, and <EM>space</EM>,
+ <I>newline</I>, <I>line-feed</I>, <I>return</I>, <I>tab</I>, <I>backspace</I>, <I>form-feed</I>, and <I>space</I>,
respectively.
- X/Open Curses does not say what "appropriate <EM>x</EM>" might be. In practice,
+ X/Open Curses does not say what "appropriate <I>x</I>" might be. In practice,
that is a printable ASCII graphic character. The special case "^?" is
interpreted as DEL (127). In all other cases, the character value is
AND'd with 0x1f, mapping to ASCII control codes in the range 0 through
Other escapes include
- <STRONG>o</STRONG> <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
+ <B>o</B> <B>\^</B> for <B>^</B>,
- <STRONG>o</STRONG> <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
+ <B>o</B> <B>\\</B> for <B>\</B>,
- <STRONG>o</STRONG> <STRONG>\</STRONG>, for comma,
+ <B>o</B> <B>\</B>, for comma,
- <STRONG>o</STRONG> <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
+ <B>o</B> <B>\:</B> for <B>:</B>,
- <STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
+ <B>o</B> and <B>\0</B> for null.
- <STRONG>\0</STRONG> will produce \200, which does not terminate a string but behaves
+ <B>\0</B> will produce \200, which does not terminate a string but behaves
as a null character on most terminals, providing CS7 is specified.
- See <STRONG>stty(1)</STRONG>.
+ See <B>stty(1)</B>.
The reason for this quirk is to maintain binary compatibility of
the compiled terminfo files with other implementations, e.g., the
require a new binary format, which would not work with other
implementations.
- Finally, characters may be given as three octal digits after a <STRONG>\</STRONG>.
+ Finally, characters may be given as three octal digits after a <B>\</B>.
A delay in milliseconds may appear anywhere in a string capability,
- enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>, and padding characters
- are supplied by <STRONG><A HREF="curs_terminfo.3x.html">tputs(3x)</A></STRONG> to provide this delay.
+ enclosed in $<..> brackets, as in <B>el</B>=\EK$<5>, and padding characters
+ are supplied by <B><A HREF="curs_terminfo.3X.html">tputs(3X)</A></B> to provide this delay.
- <STRONG>o</STRONG> The delay must be a number with at most one decimal place of
+ <B>o</B> The delay must be a number with at most one decimal place of
precision; it may be followed by suffixes "*" or "/" or both.
- <STRONG>o</STRONG> A "*" indicates that the padding required is proportional to the
+ <B>o</B> A "*" indicates that the padding required is proportional to the
number of lines affected by the operation, and the amount given is
the per-affected-unit padding required. (In the case of insert
- character, the factor is still the number of <EM>lines</EM> affected.)
+ character, the factor is still the number of <I>lines</I> affected.)
- Normally, padding is advisory if the device has the <STRONG>xon</STRONG> capability;
+ Normally, padding is advisory if the device has the <B>xon</B> capability;
it is used for cost computation but does not trigger delays.
- <STRONG>o</STRONG> A "/" suffix indicates that the padding is mandatory and forces a
+ <B>o</B> A "/" suffix indicates that the padding is mandatory and forces a
delay of the given number of milliseconds even on devices for which
- <STRONG>xon</STRONG> is present to indicate flow control.
+ <B>xon</B> is present to indicate flow control.
Sometimes individual capabilities must be commented out. To do this,
put a period before the capability name. For example, see the second
- <STRONG>ind</STRONG> in the example above.
+ <B>ind</B> in the example above.
</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
- The <STRONG>ncurses</STRONG> library searches for terminal descriptions in several
+ The <B>ncurses</B> library searches for terminal descriptions in several
places. It uses only the first description found. The library has a
compiled-in list of places to search which can be overridden by
- environment variables. Before starting to search, <STRONG>ncurses</STRONG> eliminates
+ environment variables. Before starting to search, <B>ncurses</B> eliminates
duplicates in its search list.
- <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is interpreted as
+ <B>o</B> If the environment variable TERMINFO is set, it is interpreted as
the pathname of a directory containing the compiled description you
are working on. Only that directory is searched.
- <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in the directory
- <STRONG>$HOME/.terminfo</STRONG> for a compiled description.
+ <B>o</B> If TERMINFO is not set, <B>ncurses</B> will instead look in the directory
+ <B>$HOME/.terminfo</B> for a compiled description.
- <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is set, <STRONG>ncurses</STRONG>
+ <B>o</B> Next, if the environment variable TERMINFO_DIRS is set, <B>ncurses</B>
will interpret the contents of that variable as a list of colon-
separated directories (or database files) to be searched.
An empty directory name (i.e., if the variable begins or ends with
a colon, or contains adjacent colons) is interpreted as the system
- location <EM>/usr/share/terminfo</EM>.
+ location <I>/usr/share/terminfo</I>.
- <STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
+ <B>o</B> Finally, <B>ncurses</B> searches these compiled-in locations:
- <STRONG>o</STRONG> a list of directories (no default value), and
+ <B>o</B> a list of directories (no default value), and
- <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM> (the
+ <B>o</B> the system terminfo directory, <I>/usr/share/terminfo</I> (the
compiled-in default).
</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
We now outline how to prepare descriptions of terminals. The most
effective way to prepare a terminal description is by imitating the
- description of a similar terminal in <EM>terminfo</EM> and to build up a
- description gradually, using partial descriptions with <EM>vi</EM> or some other
+ description of a similar terminal in <I>terminfo</I> and to build up a
+ description gradually, using partial descriptions with <I>vi</I> or some other
screen-oriented program to check that they are correct. Be aware that
a very unusual terminal may expose deficiencies in the ability of the
- <EM>terminfo</EM> file to describe it or bugs in the screen-handling code of the
+ <I>terminfo</I> file to describe it or bugs in the screen-handling code of the
test program.
To get the padding for insert line right (if the terminal manufacturer
</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
The number of columns on each line for the terminal is given by the
- <STRONG>cols</STRONG> numeric capability. If the terminal is a CRT, then the number of
- lines on the screen is given by the <STRONG>lines</STRONG> capability. If the terminal
+ <B>cols</B> numeric capability. If the terminal is a CRT, then the number of
+ lines on the screen is given by the <B>lines</B> capability. If the terminal
wraps around to the beginning of the next line when it reaches the
- right margin, then it should have the <STRONG>am</STRONG> capability. If the terminal
+ right margin, then it should have the <B>am</B> capability. If the terminal
can clear its screen, leaving the cursor in the home position, then
- this is given by the <STRONG>clear</STRONG> string capability. If the terminal
+ this is given by the <B>clear</B> string capability. If the terminal
overstrikes (rather than clearing a position when a character is struck
- over) then it should have the <STRONG>os</STRONG> capability. If the terminal is a
- printing terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>. (<STRONG>os</STRONG>
+ over) then it should have the <B>os</B> capability. If the terminal is a
+ printing terminal, with no soft copy unit, give it both <B>hc</B> and <B>os</B>. (<B>os</B>
applies to storage scope terminals, such as TEKTRONIX 4010 series, as
well as hard copy and APL terminals.) If there is a code to move the
- cursor to the left edge of the current row, give this as <STRONG>cr</STRONG>. (Normally
+ cursor to the left edge of the current row, give this as <B>cr</B>. (Normally
this will be carriage return, control/M.) If there is a code to
- produce an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
+ produce an audible signal (bell, beep, etc) give this as <B>bel</B>.
If there is a code to move the cursor one position to the left (such as
- backspace) that capability should be given as <STRONG>cub1</STRONG>. Similarly, codes
- to move to the right, up, and down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and
- <STRONG>cud1</STRONG>. These local cursor motions should not alter the text they pass
- over, for example, you would not normally use "<STRONG>cuf1</STRONG>= " because the
+ backspace) that capability should be given as <B>cub1</B>. Similarly, codes
+ to move to the right, up, and down should be given as <B>cuf1</B>, <B>cuu1</B>, and
+ <B>cud1</B>. These local cursor motions should not alter the text they pass
+ over, for example, you would not normally use "<B>cuf1</B>= " because the
space would erase the character moved over.
A very important point here is that the local cursor motions encoded in
- <EM>terminfo</EM> are undefined at the left and top edges of a CRT terminal.
+ <I>terminfo</I> are undefined at the left and top edges of a CRT terminal.
Programs should never attempt to backspace around the left edge, unless
- <STRONG>bw</STRONG> is given, and never attempt to go up locally off the top. In order
+ <B>bw</B> is given, and never attempt to go up locally off the top. In order
to scroll text up, a program will go to the bottom left corner of the
- screen and send the <STRONG>ind</STRONG> (index) string.
+ screen and send the <B>ind</B> (index) string.
To scroll text down, a program goes to the top left corner of the
- screen and sends the <STRONG>ri</STRONG> (reverse index) string. The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG>
+ screen and sends the <B>ri</B> (reverse index) string. The strings <B>ind</B> and <B>ri</B>
are undefined when not on their respective corners of the screen.
- Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG> and <STRONG>rin</STRONG>
- which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except that they take one
+ Parameterized versions of the scrolling sequences are <B>indn</B> and <B>rin</B>
+ which have the same semantics as <B>ind</B> and <B>ri</B> except that they take one
parameter, and scroll that many lines. They are also undefined except
at the appropriate edge of the screen.
- The <STRONG>am</STRONG> capability tells whether the cursor sticks at the right edge of
+ The <B>am</B> capability tells whether the cursor sticks at the right edge of
the screen when text is output, but this does not necessarily apply to
- a <STRONG>cuf1</STRONG> from the last column. The only local motion which is defined
- from the left edge is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge
- will move to the right edge of the previous row. If <STRONG>bw</STRONG> is not given,
+ a <B>cuf1</B> from the last column. The only local motion which is defined
+ from the left edge is if <B>bw</B> is given, then a <B>cub1</B> from the left edge
+ will move to the right edge of the previous row. If <B>bw</B> is not given,
the effect is undefined. This is useful for drawing a box around the
edge of the screen, for example. If the terminal has switch selectable
- automatic margins, the <EM>terminfo</EM> file usually assumes that this is on;
- i.e., <STRONG>am</STRONG>. If the terminal has a command which moves to the first
- column of the next line, that command can be given as <STRONG>nel</STRONG> (newline).
+ automatic margins, the <I>terminfo</I> file usually assumes that this is on;
+ i.e., <B>am</B>. If the terminal has a command which moves to the first
+ column of the next line, that command can be given as <B>nel</B> (newline).
It does not matter if the command clears the remainder of the current
- line, so if the terminal has no <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to
- craft a working <STRONG>nel</STRONG> out of one or both of them.
+ line, so if the terminal has no <B>cr</B> and <B>lf</B> it may still be possible to
+ craft a working <B>nel</B> out of one or both of them.
These capabilities suffice to describe hard-copy and "glass-tty"
terminals. Thus the model 33 teletype is described as
</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
Cursor addressing and other strings requiring parameters in the
terminal are described by a parameterized string capability, with
- <EM>printf</EM>-like escapes such as <EM>%x</EM> in it. For example, to address the
- cursor, the <STRONG>cup</STRONG> capability is given, using two parameters: the row and
+ <I>printf</I>-like escapes such as <I>%x</I> in it. For example, to address the
+ cursor, the <B>cup</B> capability is given, using two parameters: the row and
column to address to. (Rows and columns are numbered from zero and
refer to the physical screen visible to the user, not to any unseen
memory.) If the terminal has memory relative cursor addressing, that
- can be indicated by <STRONG>mrcup</STRONG>.
+ can be indicated by <B>mrcup</B>.
- The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes to manipulate
+ The parameter mechanism uses a stack and special <B>%</B> codes to manipulate
it. Typically a sequence will push one of the parameters onto the
stack and then print it in some format. Print (e.g., "%d") is a
special case. Other operations, including "%t" pop their operand from
the stack. It is noted that more complex operations are often
- necessary, e.g., in the <STRONG>sgr</STRONG> string.
+ necessary, e.g., in the <B>sgr</B> string.
- The <STRONG>%</STRONG> encodings have the following meanings:
+ The <B>%</B> encodings have the following meanings:
- <STRONG>%%</STRONG> outputs "%"
+ <B>%%</B> outputs "%"
- <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
- as in <STRONG>printf(3)</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":" to allow
+ <B>%</B><I>[[</I>:<I>]flags][width[.precision]][</I><B>doxXs</B><I>]</I>
+ as in <B>printf(3)</B>, flags are <I>[-+#]</I> and <I>space</I>. Use a ":" to allow
the next character to be a "-" flag, avoiding interpreting "%-" as
an operator.
- %c print <EM>pop()</EM> like %c in <STRONG>printf</STRONG>
+ %c print <I>pop()</I> like %c in <B>printf</B>
- <STRONG>%s</STRONG> print <EM>pop()</EM> like %s in <STRONG>printf</STRONG>
+ <B>%s</B> print <I>pop()</I> like %s in <B>printf</B>
- <STRONG>%p</STRONG><EM>[1-9]</EM>
- push <EM>i</EM>'th parameter
+ <B>%p</B><I>[1-9]</I>
+ push <I>i</I>'th parameter
- <STRONG>%P</STRONG><EM>[a-z]</EM>
- set dynamic variable <EM>[a-z]</EM> to <EM>pop()</EM>
+ <B>%P</B><I>[a-z]</I>
+ set dynamic variable <I>[a-z]</I> to <I>pop()</I>
- <STRONG>%g</STRONG><EM>[a-z]/</EM>
- get dynamic variable <EM>[a-z]</EM> and push it
+ <B>%g</B><I>[a-z]/</I>
+ get dynamic variable <I>[a-z]</I> and push it
- <STRONG>%P</STRONG><EM>[A-Z]</EM>
- set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
+ <B>%P</B><I>[A-Z]</I>
+ set static variable <I>[a-z]</I> to <I>pop()</I>
- <STRONG>%g</STRONG><EM>[A-Z]</EM>
- get static variable <EM>[a-z]</EM> and push it
+ <B>%g</B><I>[A-Z]</I>
+ get static variable <I>[a-z]</I> and push it
The terms "static" and "dynamic" are misleading. Historically,
these are simply two different sets of variables, whose values are
- not reset between calls to <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG>. However, that fact is not
+ not reset between calls to <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B>. However, that fact is not
documented in other implementations. Relying on it will adversely
impact portability to other implementations.
- <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
+ <B>%'</B><I>c</I><B>'</B> char constant <I>c</I>
- <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
- integer constant <EM>nn</EM>
+ <B>%{</B><I>nn</I><B>}</B>
+ integer constant <I>nn</I>
- <STRONG>%l</STRONG> push strlen(pop)
+ <B>%l</B> push strlen(pop)
- <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
- arithmetic (%m is <EM>mod</EM>): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+ <B>%+</B>, <B>%-</B>, <B>%*</B>, <B>%/</B>, <B>%m</B>
+ arithmetic (%m is <I>mod</I>): <I>push(pop()</I> <I>op</I> <I>pop())</I>
- <STRONG>%&</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
- bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+ <B>%&</B>, <B>%|</B>, <B>%^</B>
+ bit operations (AND, OR and exclusive-OR): <I>push(pop()</I> <I>op</I> <I>pop())</I>
- <STRONG>%=</STRONG>, <STRONG>%></STRONG>, <STRONG>%<</STRONG>
- logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+ <B>%=</B>, <B>%></B>, <B>%<</B>
+ logical operations: <I>push(pop()</I> <I>op</I> <I>pop())</I>
- <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
+ <B>%A</B>, <B>%O</B>
logical AND and OR operations (for conditionals)
- <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
- unary operations (logical and bit complement): <EM>push(op</EM> <EM>pop())</EM>
+ <B>%!</B>, <B>%~</B>
+ unary operations (logical and bit complement): <I>push(op</I> <I>pop())</I>
- <STRONG>%i</STRONG> add 1 to first two parameters (for ANSI terminals)
+ <B>%i</B> add 1 to first two parameters (for ANSI terminals)
- <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
- This forms an if-then-else. The <STRONG>%e</STRONG> <EM>elsepart</EM> is optional. Usually
- the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value onto the stack, and <STRONG>%t</STRONG> pops it
+ <B>%?</B> <I>expr</I> <B>%t</B> <I>thenpart</I> <B>%e</B> <I>elsepart</I> <B>%;</B>
+ This forms an if-then-else. The <B>%e</B> <I>elsepart</I> is optional. Usually
+ the <B>%?</B> <I>expr</I> part pushes a value onto the stack, and <B>%t</B> pops it
from the stack, testing if it is nonzero (true). If it is zero
- (false), control passes to the <STRONG>%e</STRONG> (else) part.
+ (false), control passes to the <B>%e</B> (else) part.
It is possible to form else-if's a la Algol 68:
- <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
+ <B>%?</B> c1 <B>%t</B> b1 <B>%e</B> c2 <B>%t</B> b2 <B>%e</B> c3 <B>%t</B> b3 <B>%e</B> c4 <B>%t</B> b4 <B>%e</B> <B>%;</B>
where ci are conditions, bi are bodies.
- Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the structure of if-
- then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can be very complicated when
- written on one line. The <STRONG>-f</STRONG> option splits the string into lines
+ Use the <B>-f</B> option of <B>tic</B> or <B>infocmp</B> to see the structure of if-
+ then-else's. Some strings, e.g., <B>sgr</B> can be very complicated when
+ written on one line. The <B>-f</B> option splits the string into lines
with the parts indented.
Binary operations are in postfix form with the operands in the usual
- order. That is, to get x-5 one would use "%gx%{5}%-". <STRONG>%P</STRONG> and <STRONG>%g</STRONG>
+ order. That is, to get x-5 one would use "%gx%{5}%-". <B>%P</B> and <B>%g</B>
variables are persistent across escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12, needs to be
sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the
rows and columns is inverted here, and that the row and column are
- printed as two digits. Thus its <STRONG>cup</STRONG> capability is
+ printed as two digits. Thus its <B>cup</B> capability is
"cup=6\E&%p2%2dc%p1%2dY".
The Microterm ACT-IV needs the current row and column sent preceded by
- a <STRONG>^T</STRONG>, with the row and column simply encoded in binary,
+ a <B>^T</B>, with the row and column simply encoded in binary,
"cup=^T%p1%c%p2%c". Terminals which use "%c" need to be able to
- backspace the cursor (<STRONG>cub1</STRONG>), and to move the cursor up one line on the
- screen (<STRONG>cuu1</STRONG>). This is necessary because it is not always safe to
- transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG> and <STRONG>\r</STRONG>, as the system may change or discard them. (The
+ backspace the cursor (<B>cub1</B>), and to move the cursor up one line on the
+ screen (<B>cuu1</B>). This is necessary because it is not always safe to
+ transmit <B>\n</B> <B>^D</B> and <B>\r</B>, as the system may change or discard them. (The
library routines dealing with terminfo set tty modes so that tabs are
never expanded, so \t is safe to send. This turns out to be essential
for the Ann Arbor 4080.)
</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
If the terminal has a fast way to home the cursor (to very upper left
- corner of screen) then this can be given as <STRONG>home</STRONG>; similarly a fast way
- of getting to the lower left-hand corner can be given as <STRONG>ll</STRONG>; this may
- involve going up with <STRONG>cuu1</STRONG> from the home position, but a program should
- never do this itself (unless <STRONG>ll</STRONG> does) because it can make no assumption
+ corner of screen) then this can be given as <B>home</B>; similarly a fast way
+ of getting to the lower left-hand corner can be given as <B>ll</B>; this may
+ involve going up with <B>cuu1</B> from the home position, but a program should
+ never do this itself (unless <B>ll</B> does) because it can make no assumption
about the effect of moving up from the home position. Note that the
home position is the same as addressing to (0,0): to the top left
corner of the screen, not of memory. (Thus, the \EH sequence on HP
- terminals cannot be used for <STRONG>home</STRONG>.)
+ terminals cannot be used for <B>home</B>.)
If the terminal has row or column absolute cursor addressing, these can
- be given as single parameter capabilities <STRONG>hpa</STRONG> (horizontal position
- absolute) and <STRONG>vpa</STRONG> (vertical position absolute). Sometimes these are
+ be given as single parameter capabilities <B>hpa</B> (horizontal position
+ absolute) and <B>vpa</B> (vertical position absolute). Sometimes these are
shorter than the more general two parameter sequence (as with the
- hp2645) and can be used in preference to <STRONG>cup</STRONG>. If there are
- parameterized local motions (e.g., move <EM>n</EM> spaces to the right) these
- can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single parameter
+ hp2645) and can be used in preference to <B>cup</B>. If there are
+ parameterized local motions (e.g., move <I>n</I> spaces to the right) these
+ can be given as <B>cud</B>, <B>cub</B>, <B>cuf</B>, and <B>cuu</B> with a single parameter
indicating how many spaces to move. These are primarily useful if the
- terminal does not have <STRONG>cup</STRONG>, such as the TEKTRONIX 4025.
+ terminal does not have <B>cup</B>, such as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running a program
that uses these capabilities, the codes to enter and exit this mode can
- be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This arises, for example, from terminals
+ be given as <B>smcup</B> and <B>rmcup</B>. This arises, for example, from terminals
like the Concept with more than one page of memory. If the terminal
has only memory relative cursor addressing and not screen relative
cursor addressing, a one screen-sized window must be fixed into the
terminal for cursor addressing to work properly. This is also used for
- the TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets the command character to be the
- one used by terminfo. If the <STRONG>smcup</STRONG> sequence will not restore the
- screen after an <STRONG>rmcup</STRONG> sequence is output (to the state prior to
- outputting <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
+ the TEKTRONIX 4025, where <B>smcup</B> sets the command character to be the
+ one used by terminfo. If the <B>smcup</B> sequence will not restore the
+ screen after an <B>rmcup</B> sequence is output (to the state prior to
+ outputting <B>rmcup</B>), specify <B>nrrmc</B>.
</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
If the terminal can clear from the current position to the end of the
- line, leaving the cursor where it is, this should be given as <STRONG>el</STRONG>. If
+ line, leaving the cursor where it is, this should be given as <B>el</B>. If
the terminal can clear from the beginning of the line to the current
position inclusive, leaving the cursor where it is, this should be
- given as <STRONG>el1</STRONG>. If the terminal can clear from the current position to
- the end of the display, then this should be given as <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only
+ given as <B>el1</B>. If the terminal can clear from the current position to
+ the end of the display, then this should be given as <B>ed</B>. <B>Ed</B> is only
defined from the first column of a line. (Thus, it can be simulated by
- a request to delete a large number of lines, if a true <STRONG>ed</STRONG> is not
+ a request to delete a large number of lines, if a true <B>ed</B> is not
available.)
</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
If the terminal can open a new blank line before the line where the
- cursor is, this should be given as <STRONG>il1</STRONG>; this is done only from the
+ cursor is, this should be given as <B>il1</B>; this is done only from the
first position of a line. The cursor must then appear on the newly
blank line. If the terminal can delete the line which the cursor is
- on, then this should be given as <STRONG>dl1</STRONG>; this is done only from the first
- position on the line to be deleted. Versions of <STRONG>il1</STRONG> and <STRONG>dl1</STRONG> which take
+ on, then this should be given as <B>dl1</B>; this is done only from the first
+ position on the line to be deleted. Versions of <B>il1</B> and <B>dl1</B> which take
a single parameter and insert or delete that many lines can be given as
- <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
+ <B>il</B> and <B>dl</B>.
If the terminal has a settable scrolling region (like the vt100) the
- command to set this can be described with the <STRONG>csr</STRONG> capability, which
+ command to set this can be described with the <B>csr</B> capability, which
takes two parameters: the top and bottom lines of the scrolling region.
The cursor position is, alas, undefined after using this command.
- It is possible to get the effect of insert or delete line using <STRONG>csr</STRONG> on
- a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save and restore cursor)
+ It is possible to get the effect of insert or delete line using <B>csr</B> on
+ a properly chosen region; the <B>sc</B> and <B>rc</B> (save and restore cursor)
commands may be useful for ensuring that your synthesized insert/delete
- string does not move the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library
+ string does not move the cursor. (Note that the <B><A HREF="ncurses.3X.html">ncurses(3X)</A></B> library
does this synthesis automatically, so you need not compose
- insert/delete strings for an entry with <STRONG>csr</STRONG>).
+ insert/delete strings for an entry with <B>csr</B>).
Yet another way to construct insert and delete might be to use a
combination of index with the memory-lock feature found on some
insert/delete).
Inserting lines at the top or bottom of the screen can also be done
- using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a true insert/delete line,
+ using <B>ri</B> or <B>ind</B> on many terminals without a true insert/delete line,
and is often faster even on terminals with those features.
- The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each scrolling
+ The boolean <B>non_dest_scroll_region</B> should be set if each scrolling
window is effectively a view port on a screen-sized canvas. To test
for this capability, create a scrolling region in the middle of the
screen, write something to the bottom line, move the cursor to the top
- of the region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data scrolled
- off the bottom of the region by the <STRONG>ri</STRONG> re-appears, then scrolling is
- non-destructive. System V and XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>,
- and <STRONG>rin</STRONG> will simulate destructive scrolling; their documentation
- cautions you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
+ of the region, and do <B>ri</B> followed by <B>dl1</B> or <B>ind</B>. If the data scrolled
+ off the bottom of the region by the <B>ri</B> re-appears, then scrolling is
+ non-destructive. System V and XSI Curses expect that <B>ind</B>, <B>ri</B>, <B>indn</B>,
+ and <B>rin</B> will simulate destructive scrolling; their documentation
+ cautions you not to define <B>csr</B> unless this is true. This <B>curses</B>
implementation is more liberal and will do explicit erases after
- scrolling if <STRONG>ndsrc</STRONG> is defined.
+ scrolling if <B>ndsrc</B> is defined.
If the terminal has the ability to define a window as part of memory,
which all commands affect, it should be given as the parameterized
- string <STRONG>wind</STRONG>. The four parameters are the starting and ending lines in
+ string <B>wind</B>. The four parameters are the starting and ending lines in
memory and the starting and ending columns in memory, in that order.
- If the terminal can retain display memory above, then the <STRONG>da</STRONG> capability
- should be given; if display memory can be retained below, then <STRONG>db</STRONG>
+ If the terminal can retain display memory above, then the <B>da</B> capability
+ should be given; if display memory can be retained below, then <B>db</B>
should be given. These indicate that deleting a line or scrolling may
- bring non-blank lines up from below or that scrolling back with <STRONG>ri</STRONG> may
+ bring non-blank lines up from below or that scrolling back with <B>ri</B> may
bring down non-blank lines.
</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
There are two basic kinds of intelligent terminals with respect to
- insert/delete character which can be described using <EM>terminfo.</EM> The
+ insert/delete character which can be described using <I>terminfo.</I> The
most common insert/delete character operations affect only the
characters on the current line and shift characters off the end of the
line rigidly. Other terminals, such as the Concept 100 and the Perkin
does not distinguish between blanks and untyped positions. If the
"abc" shifts over to the "def" which then move together around the end
of the current line and onto the next as you insert, you have the
- second type of terminal, and should give the capability <STRONG>in</STRONG>, which
+ second type of terminal, and should give the capability <B>in</B>, which
stands for "insert null".
While these are two logically separate attributes (one line versus
Terminfo can describe both terminals which have an insert mode, and
terminals which send a simple sequence to open a blank position on the
- current line. Give as <STRONG>smir</STRONG> the sequence to get into insert mode. Give
- as <STRONG>rmir</STRONG> the sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
+ current line. Give as <B>smir</B> the sequence to get into insert mode. Give
+ as <B>rmir</B> the sequence to leave insert mode. Now give as <B>ich1</B> any
sequence needed to be sent just before sending the character to be
- inserted. Most terminals with a true insert mode will not give <STRONG>ich1</STRONG>;
+ inserted. Most terminals with a true insert mode will not give <B>ich1</B>;
terminals which send a sequence to open a screen position should give
it here.
- If your terminal has both, insert mode is usually preferable to <STRONG>ich1</STRONG>.
+ If your terminal has both, insert mode is usually preferable to <B>ich1</B>.
Technically, you should not give both unless the terminal actually
requires both to be used in combination. Accordingly, some non-curses
applications get confused if both are present; the symptom is doubled
characters in an update using insert. This requirement is now rare;
- most <STRONG>ich</STRONG> sequences do not require previous smir, and most smir insert
- modes do not require <STRONG>ich1</STRONG> before each character. Therefore, the new
- <STRONG>curses</STRONG> actually assumes this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or
- <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as appropriate (but not both). If you have to write an entry
+ most <B>ich</B> sequences do not require previous smir, and most smir insert
+ modes do not require <B>ich1</B> before each character. Therefore, the new
+ <B>curses</B> actually assumes this is the case and uses either <B>rmir</B>/<B>smir</B> or
+ <B>ich</B>/<B>ich1</B> as appropriate (but not both). If you have to write an entry
to be used under new curses for a terminal old enough to need both,
- include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
+ include the <B>rmir</B>/<B>smir</B> sequences in <B>ich1</B>.
If post insert padding is needed, give this as a number of milliseconds
- in <STRONG>ip</STRONG> (a string option). Any other sequence which may need to be sent
- after an insert of a single character may also be given in <STRONG>ip</STRONG>. If your
+ in <B>ip</B> (a string option). Any other sequence which may need to be sent
+ after an insert of a single character may also be given in <B>ip</B>. If your
terminal needs both to be placed into an "insert mode" and a special
- code to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG> and <STRONG>ich1</STRONG>
- can be given, and both will be used. The <STRONG>ich</STRONG> capability, with one
- parameter, <EM>n</EM>, will repeat the effects of <STRONG>ich1</STRONG> <EM>n</EM> times.
+ code to precede each inserted character, then both <B>smir</B>/<B>rmir</B> and <B>ich1</B>
+ can be given, and both will be used. The <B>ich</B> capability, with one
+ parameter, <I>n</I>, will repeat the effects of <B>ich1</B> <I>n</I> times.
If padding is necessary between characters typed while not in insert
- mode, give this as a number of milliseconds padding in <STRONG>rmp</STRONG>.
+ mode, give this as a number of milliseconds padding in <B>rmp</B>.
It is occasionally necessary to move around while in insert mode to
delete characters on the same line (e.g., if there is a tab after the
insertion position). If your terminal allows motion while in insert
- mode you can give the capability <STRONG>mir</STRONG> to speed up inserting in this
- case. Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals (notably
- Datamedia's) must not have <STRONG>mir</STRONG> because of the way their insert mode
+ mode you can give the capability <B>mir</B> to speed up inserting in this
+ case. Omitting <B>mir</B> will affect only speed. Some terminals (notably
+ Datamedia's) must not have <B>mir</B> because of the way their insert mode
works.
- Finally, you can specify <STRONG>dch1</STRONG> to delete a single character, <STRONG>dch</STRONG> with
- one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM> and delete mode by giving
- <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit delete mode (any mode the terminal
- needs to be placed in for <STRONG>dch1</STRONG> to work).
+ Finally, you can specify <B>dch1</B> to delete a single character, <B>dch</B> with
+ one parameter, <I>n</I>, to delete <I>n</I> <I>characters,</I> and delete mode by giving
+ <B>smdc</B> and <B>rmdc</B> to enter and exit delete mode (any mode the terminal
+ needs to be placed in for <B>dch1</B> to work).
- A command to erase <EM>n</EM> characters (equivalent to outputting <EM>n</EM> blanks
- without moving the cursor) can be given as <STRONG>ech</STRONG> with one parameter.
+ A command to erase <I>n</I> characters (equivalent to outputting <I>n</I> blanks
+ without moving the cursor) can be given as <B>ech</B> with one parameter.
</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
If your terminal has one or more kinds of display attributes, these can
be represented in a number of different ways. You should choose one
- display form as <EM>standout</EM> <EM>mode</EM>, representing a good, high contrast,
+ display form as <I>standout</I> <I>mode</I>, representing a good, high contrast,
easy-on-the-eyes, format for highlighting error messages and other
attention getters. (If you have a choice, reverse video plus half-
bright is good, or reverse video alone.) The sequences to enter and
- exit standout mode are given as <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the
+ exit standout mode are given as <B>smso</B> and <B>rmso</B>, respectively. If the
code to change into or out of standout mode leaves one or even two
blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then
- <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
+ <B>xmc</B> should be given to tell how many spaces are left.
- Codes to begin underlining and end underlining can be given as <STRONG>smul</STRONG> and
- <STRONG>rmul</STRONG> respectively. If the terminal has a code to underline the current
+ Codes to begin underlining and end underlining can be given as <B>smul</B> and
+ <B>rmul</B> respectively. If the terminal has a code to underline the current
character and move the cursor one space to the right, such as the
- Microterm Mime, this can be given as <STRONG>uc</STRONG>.
+ Microterm Mime, this can be given as <B>uc</B>.
- Other capabilities to enter various highlighting modes include <STRONG>blink</STRONG>
- (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG> (dim or half-bright) <STRONG>invis</STRONG>
- (blanking or invisible text) <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG>
- (turn off <EM>all</EM> attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
- mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode). Turning on any of
+ Other capabilities to enter various highlighting modes include <B>blink</B>
+ (blinking) <B>bold</B> (bold or extra bright) <B>dim</B> (dim or half-bright) <B>invis</B>
+ (blanking or invisible text) <B>prot</B> (protected) <B>rev</B> (reverse video) <B>sgr0</B>
+ (turn off <I>all</I> attribute modes) <B>smacs</B> (enter alternate character set
+ mode) and <B>rmacs</B> (exit alternate character set mode). Turning on any of
these modes singly may or may not turn off other modes.
If there is a sequence to set arbitrary combinations of modes, this
- should be given as <STRONG>sgr</STRONG> (set attributes), taking 9 parameters. Each
+ should be given as <B>sgr</B> (set attributes), taking 9 parameters. Each
parameter is either 0 or nonzero, as the corresponding attribute is on
or off. The 9 parameters are, in order: standout, underline, reverse,
blink, dim, bold, blank, protect, alternate character set. Not all
- modes need be supported by <STRONG>sgr</STRONG>, only those for which corresponding
+ modes need be supported by <B>sgr</B>, only those for which corresponding
separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
- <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+ <B>tparm</B> <B>parameter</B> <B>attribute</B> <B>escape</B> <B>sequence</B>
none none \E[0m
p1 standout \E[0;1;7m
Writing out the above sequences, along with their dependencies yields
- <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
+ <B>sequence</B> <B>when</B> <B>to</B> <B>output</B> <B>terminfo</B> <B>translation</B>
\E[0 always \E[0
;1 if p1 or p6 %?%p1%p6%|%t;1%;
string. The only drawback to adding an sgr string is that termcap also
assumes that sgr0 does not exit alternate character set mode.
- Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit special
+ Terminals with the "magic cookie" glitch (<B>xmc</B>) deposit special
"cookies" when they receive mode-setting sequences, which affect the
display algorithm rather than having extra bits for each character.
Some terminals, such as the HP 2621, automatically leave standout mode
when they move to a new line or the cursor is addressed. Programs
using standout mode should exit standout mode before moving the cursor
- or sending a newline, unless the <STRONG>msgr</STRONG> capability, asserting that it is
+ or sending a newline, unless the <B>msgr</B> capability, asserting that it is
safe to move in standout mode, is present.
If the terminal has a way of flashing the screen to indicate an error
- quietly (a bell replacement) then this can be given as <STRONG>flash</STRONG>; it must
+ quietly (a bell replacement) then this can be given as <B>flash</B>; it must
not move the cursor.
If the cursor needs to be made more visible than normal when it is not
on the bottom line (to make, for example, a non-blinking underline into
an easier to find block or blinking underline) give this sequence as
- <STRONG>cvvis</STRONG>. If there is a way to make the cursor completely invisible, give
- that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which undoes the
+ <B>cvvis</B>. If there is a way to make the cursor completely invisible, give
+ that as <B>civis</B>. The capability <B>cnorm</B> should be given which undoes the
effects of both of these modes.
If your terminal correctly generates underlined characters (with no
special codes needed) even though it does not overstrike, then you
- should give the capability <STRONG>ul</STRONG>. If a character overstriking another
- leaves both characters on the screen, specify the capability <STRONG>os</STRONG>. If
+ should give the capability <B>ul</B>. If a character overstriking another
+ leaves both characters on the screen, specify the capability <B>os</B>. If
overstrikes are erasable with a blank, then this should be indicated by
- giving <STRONG>eo</STRONG>.
+ giving <B>eo</B>.
</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
pressed, this information can be given. Note that it is not possible
to handle terminals where the keypad only works in local (this applies,
for example, to the unshifted HP 2621 keys). If the keypad can be set
- to transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and <STRONG>rmkx</STRONG>.
+ to transmit or not transmit, give these codes as <B>smkx</B> and <B>rmkx</B>.
Otherwise the keypad is assumed to always transmit.
The codes sent by the left arrow, right arrow, up arrow, down arrow,
- and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG> <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG>
+ and home keys can be given as <B>kcub1,</B> <B>kcuf1,</B> <B>kcuu1,</B> <B>kcud1,</B> and <B>khome</B>
respectively. If there are function keys such as f0, f1, ..., f10, the
- codes they send can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys
+ codes they send can be given as <B>kf0,</B> <B>kf1,</B> <B>...,</B> <B>kf10</B>. If these keys
have labels other than the default f0 through f10, the labels can be
- given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
+ given as <B>lf0,</B> <B>lf1,</B> <B>...,</B> <B>lf10</B>.
The codes transmitted by certain other special keys can be given:
- <STRONG>o</STRONG> <STRONG>kll</STRONG> (home down),
+ <B>o</B> <B>kll</B> (home down),
- <STRONG>o</STRONG> <STRONG>kbs</STRONG> (backspace),
+ <B>o</B> <B>kbs</B> (backspace),
- <STRONG>o</STRONG> <STRONG>ktbc</STRONG> (clear all tabs),
+ <B>o</B> <B>ktbc</B> (clear all tabs),
- <STRONG>o</STRONG> <STRONG>kctab</STRONG> (clear the tab stop in this column),
+ <B>o</B> <B>kctab</B> (clear the tab stop in this column),
- <STRONG>o</STRONG> <STRONG>kclr</STRONG> (clear screen or erase key),
+ <B>o</B> <B>kclr</B> (clear screen or erase key),
- <STRONG>o</STRONG> <STRONG>kdch1</STRONG> (delete character),
+ <B>o</B> <B>kdch1</B> (delete character),
- <STRONG>o</STRONG> <STRONG>kdl1</STRONG> (delete line),
+ <B>o</B> <B>kdl1</B> (delete line),
- <STRONG>o</STRONG> <STRONG>krmir</STRONG> (exit insert mode),
+ <B>o</B> <B>krmir</B> (exit insert mode),
- <STRONG>o</STRONG> <STRONG>kel</STRONG> (clear to end of line),
+ <B>o</B> <B>kel</B> (clear to end of line),
- <STRONG>o</STRONG> <STRONG>ked</STRONG> (clear to end of screen),
+ <B>o</B> <B>ked</B> (clear to end of screen),
- <STRONG>o</STRONG> <STRONG>kich1</STRONG> (insert character or enter insert mode),
+ <B>o</B> <B>kich1</B> (insert character or enter insert mode),
- <STRONG>o</STRONG> <STRONG>kil1</STRONG> (insert line),
+ <B>o</B> <B>kil1</B> (insert line),
- <STRONG>o</STRONG> <STRONG>knp</STRONG> (next page),
+ <B>o</B> <B>knp</B> (next page),
- <STRONG>o</STRONG> <STRONG>kpp</STRONG> (previous page),
+ <B>o</B> <B>kpp</B> (previous page),
- <STRONG>o</STRONG> <STRONG>kind</STRONG> (scroll forward/down),
+ <B>o</B> <B>kind</B> (scroll forward/down),
- <STRONG>o</STRONG> <STRONG>kri</STRONG> (scroll backward/up),
+ <B>o</B> <B>kri</B> (scroll backward/up),
- <STRONG>o</STRONG> <STRONG>khts</STRONG> (set a tab stop in this column).
+ <B>o</B> <B>khts</B> (set a tab stop in this column).
In addition, if the keypad has a 3 by 3 array of keys including the
- four arrow keys, the other five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>,
- <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful when the effects of a 3 by 3
+ four arrow keys, the other five keys can be given as <B>ka1</B>, <B>ka3</B>, <B>kb2</B>,
+ <B>kc1</B>, and <B>kc3</B>. These keys are useful when the effects of a 3 by 3
directional pad are needed.
- Strings to program function keys can be given as <STRONG>pfkey</STRONG>, <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>.
- A string to program screen labels should be specified as <STRONG>pln</STRONG>. Each of
+ Strings to program function keys can be given as <B>pfkey</B>, <B>pfloc</B>, and <B>pfx</B>.
+ A string to program screen labels should be specified as <B>pln</B>. Each of
these strings takes two parameters: the function key number to program
(from 0 to 10) and the string to program it with. Function key numbers
out of this range may program undefined keys in a terminal dependent
- manner. The difference between the capabilities is that <STRONG>pfkey</STRONG> causes
+ manner. The difference between the capabilities is that <B>pfkey</B> causes
pressing the given key to be the same as the user typing the given
- string; <STRONG>pfloc</STRONG> causes the string to be executed by the terminal in
- local; and <STRONG>pfx</STRONG> causes the string to be transmitted to the computer.
+ string; <B>pfloc</B> causes the string to be executed by the terminal in
+ local; and <B>pfx</B> causes the string to be transmitted to the computer.
- The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of programmable
+ The capabilities <B>nlab</B>, <B>lw</B> and <B>lh</B> define the number of programmable
screen labels and their width and height. If there are commands to
- turn the labels on and off, give them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is
+ turn the labels on and off, give them in <B>smln</B> and <B>rmln</B>. <B>smln</B> is
normally output after one or more pln sequences to make sure that the
change becomes visible.
</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
A few capabilities are used only for tabs:
- <STRONG>o</STRONG> If the terminal has hardware tabs, the command to advance to the
- next tab stop can be given as <STRONG>ht</STRONG> (usually control/I).
+ <B>o</B> If the terminal has hardware tabs, the command to advance to the
+ next tab stop can be given as <B>ht</B> (usually control/I).
- <STRONG>o</STRONG> A "back-tab" command which moves leftward to the preceding tab stop
- can be given as <STRONG>cbt</STRONG>.
+ <B>o</B> A "back-tab" command which moves leftward to the preceding tab stop
+ can be given as <B>cbt</B>.
By convention, if the teletype modes indicate that tabs are being
expanded by the computer rather than being sent to the terminal,
- programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are present, since
+ programs should not use <B>ht</B> or <B>cbt</B> even if they are present, since
the user may not have the tab stops properly set.
- <STRONG>o</STRONG> If the terminal has hardware tabs which are initially set every <EM>n</EM>
- spaces when the terminal is powered up, the numeric parameter <STRONG>it</STRONG> is
+ <B>o</B> If the terminal has hardware tabs which are initially set every <I>n</I>
+ spaces when the terminal is powered up, the numeric parameter <B>it</B> is
given, showing the number of spaces the tabs are set to.
- The <STRONG>it</STRONG> capability is normally used by the <STRONG>tset</STRONG> command to determine
+ The <B>it</B> capability is normally used by the <B>tset</B> command to determine
whether to set the mode for hardware tab expansion, and whether to
set the tab stops. If the terminal has tab stops that can be saved
in non-volatile memory, the terminfo description can assume that
Other capabilities include
- <STRONG>o</STRONG> <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initialization strings for the terminal,
+ <B>o</B> <B>is1</B>, <B>is2</B>, and <B>is3</B>, initialization strings for the terminal,
- <STRONG>o</STRONG> <STRONG>iprog</STRONG>, the path name of a program to be run to initialize the
+ <B>o</B> <B>iprog</B>, the path name of a program to be run to initialize the
terminal,
- <STRONG>o</STRONG> and <STRONG>if</STRONG>, the name of a file containing long initialization strings.
+ <B>o</B> and <B>if</B>, the name of a file containing long initialization strings.
These strings are expected to set the terminal into modes consistent
with the rest of the terminfo description. They are normally sent to
- the terminal, by the <EM>init</EM> option of the <STRONG>tput</STRONG> program, each time the
+ the terminal, by the <I>init</I> option of the <B>tput</B> program, each time the
user logs in. They will be printed in the following order:
run the program
- <STRONG>iprog</STRONG>
+ <B>iprog</B>
output
- <STRONG>is1</STRONG> and
- <STRONG>is2</STRONG>
+ <B>is1</B> and
+ <B>is2</B>
set the margins using
- <STRONG>mgc</STRONG> or
- <STRONG>smglp</STRONG> and <STRONG>smgrp</STRONG> or
- <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
+ <B>mgc</B> or
+ <B>smglp</B> and <B>smgrp</B> or
+ <B>smgl</B> and <B>smgr</B>
set tabs using
- <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>
+ <B>tbc</B> and <B>hts</B>
print the file
- <STRONG>if</STRONG>
+ <B>if</B>
and finally output
- <STRONG>is3</STRONG>.
+ <B>is3</B>.
- Most initialization is done with <STRONG>is2</STRONG>. Special terminal modes can be
+ Most initialization is done with <B>is2</B>. Special terminal modes can be
set up without duplicating strings by putting the common sequences in
- <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and <STRONG>is3</STRONG>.
+ <B>is2</B> and special cases in <B>is1</B> and <B>is3</B>.
A set of sequences that does a harder reset from a totally unknown
- state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analogous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG>
- and <STRONG>is3</STRONG> respectively. These strings are output by <EM>reset</EM> option of
- <STRONG>tput</STRONG>, or by the <STRONG>reset</STRONG> program (an alias of <STRONG>tset</STRONG>), which is used when
+ state can be given as <B>rs1</B>, <B>rs2</B>, <B>rf</B> and <B>rs3</B>, analogous to <B>is1</B> <B>,</B> <B>is2</B> <B>,</B> <B>if</B>
+ and <B>is3</B> respectively. These strings are output by <I>reset</I> option of
+ <B>tput</B>, or by the <B>reset</B> program (an alias of <B>tset</B>), which is used when
the terminal gets into a wedged state. Commands are normally placed in
- <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoying effects on the screen
+ <B>rs1</B>, <B>rs2</B> <B>rs3</B> and <B>rf</B> only if they produce annoying effects on the screen
and are not necessary when logging in. For example, the command to set
- the vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>, but it
+ the vt100 into 80-column mode would normally be part of <B>is2</B>, but it
causes an annoying glitch of the screen and is not normally needed
since the terminal is usually already in 80-column mode.
- The <STRONG>reset</STRONG> program writes strings including <STRONG>iprog</STRONG>, etc., in the same
- order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc., instead of <STRONG>is1</STRONG>, etc. If
- any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset capability strings are missing, the
- <STRONG>reset</STRONG> program falls back upon the corresponding initialization
+ The <B>reset</B> program writes strings including <B>iprog</B>, etc., in the same
+ order as the <I>init</I> program, using <B>rs1</B>, etc., instead of <B>is1</B>, etc. If
+ any of <B>rs1</B>, <B>rs2</B>, <B>rs3</B>, or <B>rf</B> reset capability strings are missing, the
+ <B>reset</B> program falls back upon the corresponding initialization
capability string.
If there are commands to set and clear tab stops, they can be given as
- <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab stop in the current column
+ <B>tbc</B> (clear all tab stops) and <B>hts</B> (set a tab stop in the current column
of every row). If a more complex sequence is needed to set the tabs
- than can be described by this, the sequence can be placed in <STRONG>is2</STRONG> or <STRONG>if</STRONG>.
+ than can be described by this, the sequence can be placed in <B>is2</B> or <B>if</B>.
- The <STRONG>tput</STRONG> <STRONG>reset</STRONG> command uses the same capability strings as the <STRONG>reset</STRONG>
- command, although the two programs (<STRONG>tput</STRONG> and <STRONG>reset</STRONG>) provide different
+ The <B>tput</B> <B>reset</B> command uses the same capability strings as the <B>reset</B>
+ command, although the two programs (<B>tput</B> and <B>reset</B>) provide different
command-line options.
In practice, these terminfo capabilities are not often used in
- initialization of tabs (though they are required for the <STRONG>tabs</STRONG> program):
+ initialization of tabs (though they are required for the <B>tabs</B> program):
- <STRONG>o</STRONG> Almost all hardware terminals (at least those which supported tabs)
- initialized those to every <EM>eight</EM> columns:
+ <B>o</B> Almost all hardware terminals (at least those which supported tabs)
+ initialized those to every <I>eight</I> columns:
The only exception was the AT&T 2300 series, which set tabs to
- every <EM>five</EM> columns.
+ every <I>five</I> columns.
- <STRONG>o</STRONG> In particular, developers of the hardware terminals which are
+ <B>o</B> In particular, developers of the hardware terminals which are
commonly used as models for modern terminal emulators provided
- documentation demonstrating that <EM>eight</EM> columns were the standard.
+ documentation demonstrating that <I>eight</I> columns were the standard.
- <STRONG>o</STRONG> Because of this, the terminal initialization programs <STRONG>tput</STRONG> and <STRONG>tset</STRONG>
- use the <STRONG>tbc</STRONG> (<STRONG>clear_all_tabs</STRONG>) and <STRONG>hts</STRONG> (<STRONG>set_tab</STRONG>) capabilities
- directly only when the <STRONG>it</STRONG> (<STRONG>init_tabs</STRONG>) capability is set to a value
- other than <EM>eight</EM>.
+ <B>o</B> Because of this, the terminal initialization programs <B>tput</B> and <B>tset</B>
+ use the <B>tbc</B> (<B>clear_all_tabs</B>) and <B>hts</B> (<B>set_tab</B>) capabilities
+ directly only when the <B>it</B> (<B>init_tabs</B>) capability is set to a value
+ other than <I>eight</I>.
</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
If the terminal uses xon/xoff handshaking for flow control (that is, it
automatically emits ^S back to the host when its input buffers are
- close to full), set <STRONG>xon</STRONG>. This capability suppresses the emission of
+ close to full), set <B>xon</B>. This capability suppresses the emission of
padding. You can also set it for memory-mapped console devices
effectively that do not have a speed limit. Padding information should
still be included so that routines can make better decisions about
relative costs, but actual pad characters will not be transmitted.
- If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed at baud rates
- below the value of <STRONG>pb</STRONG>. If the entry has no padding baud rate, then
- whether padding is emitted or not is completely controlled by <STRONG>xon</STRONG>.
+ If <B>pb</B> (padding baud rate) is given, padding is suppressed at baud rates
+ below the value of <B>pb</B>. If the entry has no padding baud rate, then
+ whether padding is emitted or not is completely controlled by <B>xon</B>.
If the terminal requires other than a null (zero) character as a pad,
- then this can be given as <STRONG>pad</STRONG>. Only the first character of the <STRONG>pad</STRONG>
+ then this can be given as <B>pad</B>. Only the first character of the <B>pad</B>
string is used.
</PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
Some terminals have an extra "status line" which is not normally used
- by software (and thus not counted in the terminal's <STRONG>lines</STRONG> capability).
+ by software (and thus not counted in the terminal's <B>lines</B> capability).
The simplest case is a status line which is cursor-addressable but not
part of the main scrolling region on the screen; the Heathkit H19 has a
status line of this kind, as would a 24-line VT100 with a 23-line
scrolling region set up on initialization. This situation is indicated
- by the <STRONG>hs</STRONG> capability.
+ by the <B>hs</B> capability.
Some terminals with status lines need special sequences to access the
status line. These may be expressed as a string with single parameter
- <STRONG>tsl</STRONG> which takes the cursor to a given zero-origin column on the status
- line. The capability <STRONG>fsl</STRONG> must return to the main-screen cursor
- positions before the last <STRONG>tsl</STRONG>. You may need to embed the string values
- of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG> and <STRONG>fsl</STRONG> to
+ <B>tsl</B> which takes the cursor to a given zero-origin column on the status
+ line. The capability <B>fsl</B> must return to the main-screen cursor
+ positions before the last <B>tsl</B>. You may need to embed the string values
+ of <B>sc</B> (save cursor) and <B>rc</B> (restore cursor) in <B>tsl</B> and <B>fsl</B> to
accomplish this.
The status line is normally assumed to be the same width as the width
of the terminal. If this is untrue, you can specify it with the
- numeric capability <STRONG>wsl</STRONG>.
+ numeric capability <B>wsl</B>.
- A command to erase or blank the status line may be specified as <STRONG>dsl</STRONG>.
+ A command to erase or blank the status line may be specified as <B>dsl</B>.
- The boolean capability <STRONG>eslok</STRONG> specifies that escape sequences, tabs,
+ The boolean capability <B>eslok</B> specifies that escape sequences, tabs,
etc., work ordinarily in the status line.
- The <STRONG>ncurses</STRONG> implementation does not yet use any of these capabilities.
+ The <B>ncurses</B> implementation does not yet use any of these capabilities.
They are documented here in case they ever become important.
</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
Many terminals have alternate character sets useful for forms-drawing.
- Terminfo and <STRONG>curses</STRONG> have built-in support for most of the drawing
+ Terminfo and <B>curses</B> have built-in support for most of the drawing
characters supported by the VT100, with some characters from the AT&T
4410v1 added. This alternate character set may be specified by the
- <STRONG>acsc</STRONG> capability.
+ <B>acsc</B> capability.
- <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>acsc</STRONG> <STRONG>acsc</STRONG>
- <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Char</STRONG> <STRONG>Value</STRONG>
+ <B>Glyph</B> <B>ACS</B> <B>Ascii</B> <B>acsc</B> <B>acsc</B>
+ <B>Name</B> <B>Name</B> <B>Default</B> <B>Char</B> <B>Value</B>
--------------------------------------------------------------------
arrow pointing right ACS_RARROW > + 0x2b
arrow pointing left ACS_LARROW < , 0x2c
A few notes apply to the table itself:
- <STRONG>o</STRONG> X/Open Curses incorrectly states that the mapping for <EM>lantern</EM> is
+ <B>o</B> X/Open Curses incorrectly states that the mapping for <I>lantern</I> is
uppercase "I" although Unix implementations use the lowercase "i"
mapping.
- <STRONG>o</STRONG> The DEC VT100 implemented graphics using the alternate character
- set feature, temporarily switching <EM>modes</EM> and sending characters in
- the range 0x60 (96) to 0x7e (126) (the <STRONG>acsc</STRONG> <STRONG>Value</STRONG> column in the
+ <B>o</B> The DEC VT100 implemented graphics using the alternate character
+ set feature, temporarily switching <I>modes</I> and sending characters in
+ the range 0x60 (96) to 0x7e (126) (the <B>acsc</B> <B>Value</B> column in the
table).
- <STRONG>o</STRONG> The AT&T terminal added graphics characters outside that range.
+ <B>o</B> The AT&T terminal added graphics characters outside that range.
Some of the characters within the range do not match the VT100;
- presumably they were used in the AT&T terminal: <EM>board</EM> <EM>of</EM> <EM>squares</EM>
- replaces the VT100 <EM>newline</EM> symbol, while <EM>lantern</EM> <EM>symbol</EM> replaces
- the VT100 <EM>vertical</EM> <EM>tab</EM> symbol. The other VT100 symbols for control
- characters (<EM>horizontal</EM> <EM>tab</EM>, <EM>carriage</EM> <EM>return</EM> and <EM>line-feed</EM>) are not
+ presumably they were used in the AT&T terminal: <I>board</I> <I>of</I> <I>squares</I>
+ replaces the VT100 <I>newline</I> symbol, while <I>lantern</I> <I>symbol</I> replaces
+ the VT100 <I>vertical</I> <I>tab</I> symbol. The other VT100 symbols for control
+ characters (<I>horizontal</I> <I>tab</I>, <I>carriage</I> <I>return</I> and <I>line-feed</I>) are not
(re)used in curses.
The best way to define a new device's graphics set is to add a column
to a copy of this table for your terminal, giving the character which
- (when emitted between <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the
+ (when emitted between <B>smacs</B>/<B>rmacs</B> switches) will be rendered as the
corresponding graphic. Then read off the VT100/your terminal character
pairs right to left in sequence; these become the ACSC string.
</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
- The curses library functions <STRONG>init_pair</STRONG> and <STRONG>init_color</STRONG> manipulate the
- <EM>color</EM> <EM>pairs</EM> and <EM>color</EM> <EM>values</EM> discussed in this section (see
- <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> for details on these and related functions).
+ The curses library functions <B>init_pair</B> and <B>init_color</B> manipulate the
+ <I>color</I> <I>pairs</I> and <I>color</I> <I>values</I> discussed in this section (see
+ <B><A HREF="curs_color.3X.html">curs_color(3X)</A></B> for details on these and related functions).
Most color terminals are either "Tektronix-like" or "HP-like":
- <STRONG>o</STRONG> Tektronix-like terminals have a predefined set of <EM>N</EM> colors (where <EM>N</EM>
+ <B>o</B> Tektronix-like terminals have a predefined set of <I>N</I> colors (where <I>N</I>
is usually 8), and can set character-cell foreground and background
- characters independently, mixing them into <EM>N</EM> * <EM>N</EM> color-pairs.
+ characters independently, mixing them into <I>N</I> * <I>N</I> color-pairs.
- <STRONG>o</STRONG> On HP-like terminals, the user must set each color pair up
+ <B>o</B> On HP-like terminals, the user must set each color pair up
separately (foreground and background are not independently
- settable). Up to <EM>M</EM> color-pairs may be set up from 2*<EM>M</EM> different
+ settable). Up to <I>M</I> color-pairs may be set up from 2*<I>M</I> different
colors. ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color method. The
- numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify the maximum numbers of
- colors and color-pairs that can be displayed simultaneously. The <STRONG>op</STRONG>
+ numeric capabilities <B>colors</B> and <B>pairs</B> specify the maximum numbers of
+ colors and color-pairs that can be displayed simultaneously. The <B>op</B>
(original pair) string resets foreground and background colors to their
- default values for the terminal. The <STRONG>oc</STRONG> string resets all colors or
+ default values for the terminal. The <B>oc</B> string resets all colors or
color-pairs to their default values for the terminal. Some terminals
(including many PC terminal emulators) erase screen areas with the
current background color rather than the power-up default background;
- these should have the boolean capability <STRONG>bce</STRONG>.
+ these should have the boolean capability <B>bce</B>.
- While the curses library works with <EM>color</EM> <EM>pairs</EM> (reflecting the
+ While the curses library works with <I>color</I> <I>pairs</I> (reflecting the
inability of some devices to set foreground and background colors
independently), there are separate capabilities for setting these
features:
- <STRONG>o</STRONG> To change the current foreground or background color on a
- Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground) and <STRONG>setab</STRONG>
- (set ANSI background) or <STRONG>setf</STRONG> (set foreground) and <STRONG>setb</STRONG> (set
+ <B>o</B> To change the current foreground or background color on a
+ Tektronix-type terminal, use <B>setaf</B> (set ANSI foreground) and <B>setab</B>
+ (set ANSI background) or <B>setf</B> (set foreground) and <B>setb</B> (set
background). These take one parameter, the color number. The SVr4
- documentation describes only <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that
+ documentation describes only <B>setaf</B>/<B>setab</B>; the XPG4 draft says that
"If the terminal supports ANSI escape sequences to set background
- and foreground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>,
+ and foreground, they should be coded as <B>setaf</B> and <B>setab</B>,
respectively.
- <STRONG>o</STRONG> If the terminal supports other escape sequences to set background
- and foreground, they should be coded as <STRONG>setf</STRONG> and <STRONG>setb</STRONG>,
- respectively. The <STRONG>vidputs</STRONG> and the <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG> functions use the
- <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> capabilities if they are defined.
+ <B>o</B> If the terminal supports other escape sequences to set background
+ and foreground, they should be coded as <B>setf</B> and <B>setb</B>,
+ respectively. The <B>vidputs</B> and the <B><A HREF="curs_refresh.3X.html">refresh(3X)</A></B> functions use the
+ <B>setaf</B> and <B>setab</B> capabilities if they are defined.
- The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single numeric
- argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> are portably defined
+ The <B>setaf</B>/<B>setab</B> and <B>setf</B>/<B>setb</B> capabilities take a single numeric
+ argument each. Argument values 0-7 of <B>setaf</B>/<B>setab</B> are portably defined
as follows (the middle column is the symbolic #define available in the
- header for the <STRONG>curses</STRONG> or <STRONG>ncurses</STRONG> libraries). The terminal hardware is
+ header for the <B>curses</B> or <B>ncurses</B> libraries). The terminal hardware is
free to map these as it likes, but the RGB values indicate normal
locations in color space.
- <STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
- black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
- red <STRONG>COLOR_RED</STRONG> 1 max,0,0
- green <STRONG>COLOR_GREEN</STRONG> 2 0,max,0
- yellow <STRONG>COLOR_YELLOW</STRONG> 3 max,max,0
- blue <STRONG>COLOR_BLUE</STRONG> 4 0,0,max
- magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
- cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
- white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
-
- The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond to a different
+ <B>Color</B> <B>#define</B> <B>Value</B> <B>RGB</B>
+ black <B>COLOR_BLACK</B> 0 0, 0, 0
+ red <B>COLOR_RED</B> 1 max,0,0
+ green <B>COLOR_GREEN</B> 2 0,max,0
+ yellow <B>COLOR_YELLOW</B> 3 max,max,0
+ blue <B>COLOR_BLUE</B> 4 0,0,max
+ magenta <B>COLOR_MAGENTA</B> 5 max,0,max
+ cyan <B>COLOR_CYAN</B> 6 0,max,max
+ white <B>COLOR_WHITE</B> 7 max,max,max
+
+ The argument values of <B>setf</B>/<B>setb</B> historically correspond to a different
mapping, i.e.,
- <STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
- black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
- blue <STRONG>COLOR_BLUE</STRONG> 1 0,0,max
- green <STRONG>COLOR_GREEN</STRONG> 2 0,max,0
- cyan <STRONG>COLOR_CYAN</STRONG> 3 0,max,max
- red <STRONG>COLOR_RED</STRONG> 4 max,0,0
- magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
- yellow <STRONG>COLOR_YELLOW</STRONG> 6 max,max,0
- white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
+ <B>Color</B> <B>#define</B> <B>Value</B> <B>RGB</B>
+ black <B>COLOR_BLACK</B> 0 0, 0, 0
+ blue <B>COLOR_BLUE</B> 1 0,0,max
+ green <B>COLOR_GREEN</B> 2 0,max,0
+ cyan <B>COLOR_CYAN</B> 3 0,max,max
+ red <B>COLOR_RED</B> 4 max,0,0
+ magenta <B>COLOR_MAGENTA</B> 5 max,0,max
+ yellow <B>COLOR_YELLOW</B> 6 max,max,0
+ white <B>COLOR_WHITE</B> 7 max,max,max
It is important to not confuse the two sets of color capabilities;
otherwise red/blue will be interchanged on the display.
- On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number parameter to
+ On an HP-like terminal, use <B>scp</B> with a color-pair number parameter to
set which color pair is current.
- Some terminals allow the <EM>color</EM> <EM>values</EM> to be modified:
+ Some terminals allow the <I>color</I> <I>values</I> to be modified:
- <STRONG>o</STRONG> On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be present to
- indicate that colors can be modified. If so, the <STRONG>initc</STRONG> capability
- will take a color number (0 to <STRONG>colors</STRONG> - 1)and three more parameters
+ <B>o</B> On a Tektronix-like terminal, the capability <B>ccc</B> may be present to
+ indicate that colors can be modified. If so, the <B>initc</B> capability
+ will take a color number (0 to <B>colors</B> - 1)and three more parameters
which describe the color. These three parameters default to being
interpreted as RGB (Red, Green, Blue) values. If the boolean
- capability <STRONG>hls</STRONG> is present, they are instead as HLS (Hue, Lightness,
+ capability <B>hls</B> is present, they are instead as HLS (Hue, Lightness,
Saturation) indices. The ranges are terminal-dependent.
- <STRONG>o</STRONG> On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for changing a
+ <B>o</B> On an HP-like terminal, <B>initp</B> may give a capability for changing a
color-pair value. It will take seven parameters; a color-pair
- number (0 to <STRONG>max_pairs</STRONG> - 1), and two triples describing first
+ number (0 to <B>max_pairs</B> - 1), and two triples describing first
background and then foreground colors. These parameters must be
(Red, Green, Blue) or (Hue, Lightness, Saturation) depending on
- <STRONG>hls</STRONG>.
+ <B>hls</B>.
On some color terminals, colors collide with highlights. You can
- register these collisions with the <STRONG>ncv</STRONG> capability. This is a bit-mask
+ register these collisions with the <B>ncv</B> capability. This is a bit-mask
of attributes not to be used when colors are enabled. The
- correspondence with the attributes understood by <STRONG>curses</STRONG> is as follows:
+ correspondence with the attributes understood by <B>curses</B> is as follows:
- <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
+ <B>Attribute</B> <B>Bit</B> <B>Decimal</B> <B>Set</B> <B>by</B>
A_STANDOUT 0 1 sgr
A_UNDERLINE 1 2 sgr
A_REVERSE 2 4 sgr
For example, on many IBM PC consoles, the underline attribute collides
with the foreground color blue and is not available in color mode.
- These should have an <STRONG>ncv</STRONG> capability of 2.
+ These should have an <B>ncv</B> capability of 2.
- SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it and optimizes
+ SVr4 curses does nothing with <B>ncv</B>, ncurses recognizes it and optimizes
the output in favor of colors.
If the terminal requires other than a null (zero) character as a pad,
then this can be given as pad. Only the first character of the pad
string is used. If the terminal does not have a pad character, specify
- npc. Note that ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
+ npc. Note that ncurses implements the termcap-compatible <B>PC</B> variable;
though the application may set this value to something other than a
- null, ncurses will test <STRONG>npc</STRONG> first and use napms if the terminal has no
+ null, ncurses will test <B>npc</B> first and use napms if the terminal has no
pad character.
If the terminal can move up or down half a line, this can be indicated
- with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line down). This is primarily
+ with <B>hu</B> (half-line up) and <B>hd</B> (half-line down). This is primarily
useful for superscripts and subscripts on hard-copy terminals. If a
hard-copy terminal can eject to the next page (form feed), give this as
- <STRONG>ff</STRONG> (usually control/L).
+ <B>ff</B> (usually control/L).
If there is a command to repeat a given character a given number of
times (to save time transmitting a large number of identical
- characters) this can be indicated with the parameterized string <STRONG>rep</STRONG>.
+ characters) this can be indicated with the parameterized string <B>rep</B>.
The first parameter is the character to be repeated and the second is
the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
the same as "xxxxxxxxxx".
If the terminal has a settable command character, such as the TEKTRONIX
- 4025, this can be indicated with <STRONG>cmdch</STRONG>. A prototype command character
+ 4025, this can be indicated with <B>cmdch</B>. A prototype command character
is chosen which is used in all capabilities. This character is given
- in the <STRONG>cmdch</STRONG> capability to identify it. The following convention is
+ in the <B>cmdch</B> capability to identify it. The following convention is
supported on some UNIX systems: The environment is to be searched for a
- <STRONG>CC</STRONG> variable, and if found, all occurrences of the prototype character
+ <B>CC</B> variable, and if found, all occurrences of the prototype character
are replaced with the character in the environment variable.
Terminal descriptions that do not represent a specific kind of known
- terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and <EM>network</EM>, should include
- the <STRONG>gn</STRONG> (generic) capability so that programs can complain that they do
+ terminal, such as <I>switch</I>, <I>dialup</I>, <I>patch</I>, and <I>network</I>, should include
+ the <B>gn</B> (generic) capability so that programs can complain that they do
not know how to talk to the terminal. (This capability does not apply
- to <EM>virtual</EM> terminal descriptions for which the escape sequences are
+ to <I>virtual</I> terminal descriptions for which the escape sequences are
known.)
If the terminal has a "meta key" which acts as a shift key, setting the
8th bit of any character transmitted, this fact can be indicated with
- <STRONG>km</STRONG>. Otherwise, software will assume that the 8th bit is parity and it
+ <B>km</B>. Otherwise, software will assume that the 8th bit is parity and it
will usually be cleared. If strings exist to turn this "meta mode" on
- and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
+ and off, they can be given as <B>smm</B> and <B>rmm</B>.
If the terminal has more lines of memory than will fit on the screen at
- once, the number of lines of memory can be indicated with <STRONG>lm</STRONG>. A value
- of <STRONG>lm</STRONG>#0 indicates that the number of lines is not fixed, but that there
+ once, the number of lines of memory can be indicated with <B>lm</B>. A value
+ of <B>lm</B>#0 indicates that the number of lines is not fixed, but that there
is still more memory than fits on the screen.
If the terminal is one of those supported by the UNIX virtual terminal
- protocol, the terminal number can be given as <STRONG>vt</STRONG>.
+ protocol, the terminal number can be given as <B>vt</B>.
Media copy strings which control an auxiliary printer connected to the
- terminal can be given as <STRONG>mc0</STRONG>: print the contents of the screen, <STRONG>mc4</STRONG>:
- turn off the printer, and <STRONG>mc5</STRONG>: turn on the printer. When the printer
+ terminal can be given as <B>mc0</B>: print the contents of the screen, <B>mc4</B>:
+ turn off the printer, and <B>mc5</B>: turn on the printer. When the printer
is on, all text sent to the terminal will be sent to the printer. It
is undefined whether the text is also displayed on the terminal screen
- when the printer is on. A variation <STRONG>mc5p</STRONG> takes one parameter, and
+ when the printer is on. A variation <B>mc5p</B> takes one parameter, and
leaves the printer on for as many characters as the value of the
parameter, then turns the printer off. The parameter should not exceed
- 255. All text, including <STRONG>mc4</STRONG>, is transparently passed to the printer
- while an <STRONG>mc5p</STRONG> is in effect.
+ 255. All text, including <B>mc4</B>, is transparently passed to the printer
+ while an <B>mc5p</B> is in effect.
</PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
Hazeltine terminals, which do not allow "~" characters to be displayed
- should indicate <STRONG>hz</STRONG>.
+ should indicate <B>hz</B>.
- Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG> wrap, such
- as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
+ Terminals which ignore a line-feed immediately after an <B>am</B> wrap, such
+ as the Concept and vt100, should indicate <B>xenl</B>.
- If <STRONG>el</STRONG> is required to get rid of standout (instead of merely writing
- normal text on top of it), <STRONG>xhp</STRONG> should be given.
+ If <B>el</B> is required to get rid of standout (instead of merely writing
+ normal text on top of it), <B>xhp</B> should be given.
Teleray terminals, where tabs turn all characters moved over to blanks,
- should indicate <STRONG>xt</STRONG> (destructive tabs). Note: the variable indicating
+ should indicate <B>xt</B> (destructive tabs). Note: the variable indicating
this is now "dest_tabs_magic_smso"; in older versions, it was
teleray_glitch. This glitch is also taken to mean that it is not
possible to position the cursor on top of a "magic cookie", that to
line. The ncurses implementation ignores this glitch.
The Beehive Superbee, which is unable to correctly transmit the escape
- or control/C characters, has <STRONG>xsb</STRONG>, indicating that the f1 key is used
+ or control/C characters, has <B>xsb</B>, indicating that the f1 key is used
for escape and f2 for control/C. (Only certain Superbees have this
problem, depending on the ROM.) Note that in older terminfo versions,
this capability was called "beehive_glitch"; it is now "no_esc_ctl_c".
Other specific terminal problems may be corrected by adding more
- capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
+ capabilities of the form <B>x</B><I>x</I>.
</PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
(to 1023 bytes), thus termcap translations of long terminfo entries can
cause problems.
- The man pages for 4.3BSD and older versions of <STRONG>tgetent</STRONG> instruct the
+ The man pages for 4.3BSD and older versions of <B>tgetent</B> instruct the
user to allocate a 1024-byte buffer for the termcap entry. The entry
gets null-terminated by the termcap library, so that makes the maximum
safe length for a termcap entry 1k-1 (1023) bytes. Depending on what
the application and the termcap library being used does, and where in
- the termcap file the terminal type that <STRONG>tgetent</STRONG> is searching for is,
+ the termcap file the terminal type that <B>tgetent</B> is searching for is,
several bad things can happen.
Some termcap libraries print a warning message or exit if they find an
The "before tc expansion" length is the most important one, because it
affects more than just users of that particular terminal. This is the
length of the entry as it exists in /etc/termcap, minus the backslash-
- newline pairs, which <STRONG>tgetent</STRONG> strips out while reading it. Some termcap
+ newline pairs, which <B>tgetent</B> strips out while reading it. Some termcap
libraries strip off the final newline, too (GNU termcap does not). Now
suppose:
- <STRONG>o</STRONG> a termcap entry before expansion is more than 1023 bytes long,
+ <B>o</B> a termcap entry before expansion is more than 1023 bytes long,
- <STRONG>o</STRONG> and the application has only allocated a 1k buffer,
+ <B>o</B> and the application has only allocated a 1k buffer,
- <STRONG>o</STRONG> and the termcap library (like the one in BSD/OS 1.1 and GNU) reads
+ <B>o</B> and the termcap library (like the one in BSD/OS 1.1 and GNU) reads
the whole entry into the buffer, no matter what its length, to see
if it is the entry it wants,
- <STRONG>o</STRONG> and <STRONG>tgetent</STRONG> is searching for a terminal type that either is the
+ <B>o</B> and <B>tgetent</B> is searching for a terminal type that either is the
long entry, appears in the termcap file after the long entry, or
- does not appear in the file at all (so that <STRONG>tgetent</STRONG> has to search
+ does not appear in the file at all (so that <B>tgetent</B> has to search
the whole termcap file).
- Then <STRONG>tgetent</STRONG> will overwrite memory, perhaps its stack, and probably
+ Then <B>tgetent</B> will overwrite memory, perhaps its stack, and probably
core dump the program. Programs like telnet are particularly
vulnerable; modern telnets pass along values like the terminal type
automatically. The results are almost as undesirable with a termcap
The "after tc expansion" length will have a similar effect to the
above, but only for people who actually set TERM to that terminal type,
- since <STRONG>tgetent</STRONG> only does "tc" expansion once it is found the terminal
+ since <B>tgetent</B> only does "tc" expansion once it is found the terminal
type it was looking for, not while searching.
In summary, a termcap entry that is longer than 1023 bytes can cause,
terminal types and users whose TERM variable does not have a termcap
entry.
- When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> implementation of
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-tc length of a termcap
+ When in -C (translate to termcap) mode, the <B>ncurses</B> implementation of
+ <B><A HREF="tic.1M.html">tic(1M)</A></B> issues warning messages when the pre-tc length of a termcap
translation is too long. The -c (check) option also checks resolved
(after tc expansion) lengths.
</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
- Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
+ Searching for terminal descriptions in <B>$HOME/.terminfo</B> and
TERMINFO_DIRS is not supported by older implementations.
- Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to SVr4, do not
+ Some SVr4 <B>curses</B> implementations, and all previous to SVr4, do not
interpret the %A and %O operators in parameter strings.
- SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement while in an
+ SVr4/XPG4 do not specify whether <B>msgr</B> licenses movement while in an
alternate-character-set mode (such modes may, among other things, map
CR and NL to characters that do not trigger local motions). The
- <STRONG>ncurses</STRONG> implementation ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises
+ <B>ncurses</B> implementation ignores <B>msgr</B> in <B>ALTCHARSET</B> mode. This raises
the possibility that an XPG4 implementation making the opposite
- interpretation may need terminfo entries made for <STRONG>ncurses</STRONG> to have <STRONG>msgr</STRONG>
+ interpretation may need terminfo entries made for <B>ncurses</B> to have <B>msgr</B>
turned off.
- The <STRONG>ncurses</STRONG> library handles insert-character and insert-character modes
+ The <B>ncurses</B> library handles insert-character and insert-character modes
in a slightly non-standard way to get better update efficiency. See
- the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG> subsection above.
+ the <B>Insert/Delete</B> <B>Character</B> subsection above.
- The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>display_clock</STRONG> are not
+ The parameter substitutions for <B>set_clock</B> and <B>display_clock</B> are not
documented in SVr4 or the XSI Curses standard. They are deduced from
the documentation for the AT&T 505 terminal.
- Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG> library wants
- to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals and emulators like
+ Be careful assigning the <B>kmous</B> capability. The <B>ncurses</B> library wants
+ to interpret it as <B>KEY_MOUSE</B>, for use by terminals and emulators like
xterm that can return mouse-tracking information in the keyboard-input
stream.
X/Open Curses does not mention italics. Portable applications must
assume that numeric capabilities are signed 16-bit values. This
- includes the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv) capability. The 32768 mask value
+ includes the <I>no</I><B>_</B><I>color</I><B>_</B><I>video</I> (ncv) capability. The 32768 mask value
used for italics with ncv can be confused with an absent or cancelled
ncv. If italics should work with colors, then the ncv value must be
specified, even if it is zero.
subsets of the XSI Curses standard and (in some cases) different
extension sets. Here is a summary, accurate as of October 1995:
- <STRONG>o</STRONG> <STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabilities.
+ <B>o</B> <B>SVR4,</B> <B>Solaris,</B> <B>ncurses</B> -- These support all SVr4 capabilities.
- <STRONG>o</STRONG> <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented extended string
- capability (<STRONG>set_pglen</STRONG>).
+ <B>o</B> <B>SGI</B> -- Supports the SVr4 set, adds one undocumented extended string
+ capability (<B>set_pglen</B>).
- <STRONG>o</STRONG> <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of terminfo
- capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the numerics with
- <STRONG>width_status_line</STRONG>; and the strings with <STRONG>prtr_non</STRONG>.
+ <B>o</B> <B>SVr1,</B> <B>Ultrix</B> -- These support a restricted subset of terminfo
+ capabilities. The booleans end with <B>xon_xoff</B>; the numerics with
+ <B>width_status_line</B>; and the strings with <B>prtr_non</B>.
- <STRONG>o</STRONG> <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234] numerics
- <STRONG>num_labels</STRONG>, <STRONG>label_height</STRONG>, <STRONG>label_width</STRONG>, plus function keys 11
- through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and <STRONG>label_off</STRONG>, plus some
+ <B>o</B> <B>HP/UX</B> -- Supports the SVr1 subset, plus the SVr[234] numerics
+ <B>num_labels</B>, <B>label_height</B>, <B>label_width</B>, plus function keys 11
+ through 63, plus <B>plab_norm</B>, <B>label_on</B>, and <B>label_off</B>, plus some
incompatible extensions in the string table.
- <STRONG>o</STRONG> <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11 through 63,
+ <B>o</B> <B>AIX</B> -- Supports the SVr1 subset, plus function keys 11 through 63,
plus a number of incompatible string table extensions.
- <STRONG>o</STRONG> <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
+ <B>o</B> <B>OSF</B> -- Supports both the SVr4 set and the AIX extensions.
</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>, <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>,
- <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>. <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
- <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG>.
+ <B><A HREF="infocmp.1M.html">infocmp(1M)</A></B>, <B><A HREF="tabs.1.html">tabs(1)</A></B>, <B><A HREF="tic.1M.html">tic(1M)</A></B>, <B><A HREF="curses.3X.html">curses(3X)</A></B>, <B><A HREF="curs_color.3X.html">curs_color(3X)</A></B>,
+ <B><A HREF="curs_variables.3X.html">curs_variables(3X)</A></B>, <B>printf(3)</B>, <B><A HREF="term_variables.3X.html">term_variables(3X)</A></B>. <B><A HREF="term.5.html">term(5)</A></B>.
+ <B><A HREF="user_caps.5.html">user_caps(5)</A></B>.
</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
- <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
+ <B><A HREF="terminfo.5.html">terminfo(5)</A></B>
</PRE>
<div class="nav">
<ul>