-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<!--
* t
* DO NOT EDIT THIS FILE BY HAND!
* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2002,2004 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.12 2004/09/25 19:07:11 tom Exp @
+ * @Id: terminfo.head,v 1.21 2013/03/09 22:11:36 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.42 2005/06/25 22:46:03 tom Exp @
+ * @Id: terminfo.tail,v 1.69 2015/04/26 14:47:23 tom Exp @
* Beginning of terminfo.tail file
+ * This file is part of ncurses.
* See "terminfo.head" for copyright.
*.in -2
*.in +2
*.in +2
*.TH
-->
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
-<TITLE>TERMINFO 5 File Formats</TITLE>
+<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
+<TITLE>terminfo 5 File Formats</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
-<H1>TERMINFO 5 File Formats</H1>
-<HR>
+<H1 class="no-header">terminfo 5 File Formats</H1>
<PRE>
-<!-- Manpage converted by man2html 3.0.1 -->
-<STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG> File Formats <STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG>
+<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> File Formats <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
-</PRE>
-<H2>NAME</H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
terminfo - terminal capability data base
-</PRE>
-<H2>SYNOPSIS</H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
/usr/share/terminfo/*/*
-</PRE>
-<H2>DESCRIPTION</H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
<EM>Terminfo</EM> is a data base describing terminals, used by
- screen-oriented programs such as <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>, <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG> and
+ screen-oriented programs such as <STRONG>nvi(1)</STRONG>, <STRONG>rogue(1)</STRONG> and
libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. <EM>Terminfo</EM> describes termi-
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
- fying padding requirements and initialization sequences.
+ fying padding requirements and initialization sequences.
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20160402).
Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
- notated as \054). White space after the `,' separator is
- ignored. The first entry for each terminal gives the
- names which are known for the terminal, separated by `|'
- characters. The first name given is the most common
- abbreviation for the terminal, the last name given should
- be a long name fully identifying the terminal, and all
- others are understood as synonyms for the terminal name.
+ notated as \054). White space after the `,' separator is
+ ignored. The first entry for each terminal gives the
+ names which are known for the terminal, separated by `|'
+ characters. The first name given is the most common
+ abbreviation for the terminal, the last name given should
+ be a long name fully identifying the terminal, and all
+ others are understood as synonyms for the terminal name.
All names but the last should be in lower case and contain
- no blanks; the last name may well contain upper case and
+ no blanks; the last name may well contain upper case and
blanks for readability.
Lines beginning with a `#' in the first column are treated
- as comments. While comment lines are legal at any point,
- the output of <EM>captoinfo</EM> and <EM>infotocap</EM> (aliases for <EM>tic</EM>)
+ as comments. While comment lines are legal at any point,
+ the output of <STRONG>captoinfo</STRONG> and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>)
will move comments so they occur only between entries.
- Newlines and leading tabs may be used for formatting
- entries for readability. These are removed from parsed
- entries. The <EM>infocmp</EM> <EM>-f</EM> option relies on this to format
- if-then-else expressions: the result can be read by <EM>tic</EM>.
+ Newlines and leading tabs may be used for formatting
+ entries for readability. These are removed from parsed
+ entries. The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> option relies on this to format
+ if-then-else expressions: the result can be read by <STRONG>tic</STRONG>.
Terminal names (except for the last, verbose entry) should
be chosen using the following conventions. The particular
- piece of hardware making up the terminal should have a
- root name, thus ``hp2621''. This name should not contain
+ piece of hardware making up the terminal should have a
+ root name, thus "hp2621". This name should not contain
hyphens. Modes that the hardware can be in, or user pref-
- erences, should be indicated by appending a hyphen and a
- mode suffix. Thus, a vt100 in 132 column mode would be
+ erences, should be indicated by appending a hyphen and a
+ mode suffix. Thus, a vt100 in 132 column mode would be
vt100-w. The following suffixes should be used where pos-
sible:
-
<STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
-<EM>nn</EM> Number of lines on the screen aaa-60
-<EM>n</EM>p Number of pages of memory c100-4p
-w Wide mode (> 80 columns, usually 132) vt100-w
- For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
+ For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
manual page.
- <STRONG>Capabilities</STRONG>
- The following is a complete table of the capabilities
- included in a terminfo description block and available to
+
+</PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
+ The following is a complete table of the capabilities
+ included in a terminfo description block and available to
terminfo-using code. In each line of the table,
- The <STRONG>variable</STRONG> is the name by which the programmer (at the
+ The <STRONG>variable</STRONG> is the name by which the programmer (at the
terminfo level) accesses the capability.
- The <STRONG>capname</STRONG> is the short name used in the text of the
- database, and is used by a person updating the database.
- Whenever possible, capnames are chosen to be the same as
+ The <STRONG>capname</STRONG> is the short name used in the text of the
+ database, and is used by a person updating the database.
+ Whenever possible, capnames are chosen to be the same as
or similar to the ANSI X3.64-1979 standard (now superseded
- by ECMA-48, which uses identical or very similar names).
+ by ECMA-48, which uses identical or very similar names).
Semantics are also intended to match those of the specifi-
cation.
- The termcap code is the old <STRONG>termcap</STRONG> capability name (some
+ The termcap code is the old <STRONG>termcap</STRONG> capability name (some
capabilities are new, and have names which termcap did not
originate).
- Capability names have no hard length limit, but an infor-
- mal limit of 5 characters has been adopted to keep them
- short and to allow the tabs in the source file <STRONG>Caps</STRONG> to
+ Capability names have no hard length limit, but an infor-
+ mal limit of 5 characters has been adopted to keep them
+ short and to allow the tabs in the source file <STRONG>Caps</STRONG> to
line up nicely.
- Finally, the description field attempts to convey the
- semantics of the capability. You may find some codes in
+ Finally, the description field attempts to convey the
+ semantics of the capability. You may find some codes in
the description field:
(P) indicates that padding may be specified
- #[1-9] in the description field indicates that the string
+ #[1-9] in the description field indicates that the string
is passed through tparm with parms as given (#<EM>i</EM>).
- (P*) indicates that padding may vary in proportion to
+ (P*) indicates that padding may vary in proportion to
the number of lines affected
(#<EM>i</EM>) indicates the <EM>i</EM>th parameter.
These are the boolean capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- auto_left_margin bw bw cub1 wraps from col-
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ auto_left_margin bw bw cub1 wraps from col-
umn 0 to last column
- auto_right_margin am am terminal has auto-
+ auto_right_margin am am terminal has auto-
matic margins
- back_color_erase bce ut screen erased with
+ back_color_erase bce ut screen erased with
background color
- can_change ccc cc terminal can re-
+ can_change ccc cc terminal can re-
define existing col-
ors
- ceol_standout_glitch xhp xs standout not erased
+ ceol_standout_glitch xhp xs standout not erased
by overwriting (hp)
- col_addr_glitch xhpa YA only positive motion
+ col_addr_glitch xhpa YA only positive motion
for hpa/mhpa caps
- cpi_changes_res cpix YF changing character
+ cpi_changes_res cpix YF changing character
pitch changes reso-
lution
- cr_cancels_micro_mode crxm YB using cr turns off
+ cr_cancels_micro_mode crxm YB using cr turns off
micro mode
- dest_tabs_magic_smso xt xt tabs destructive,
+ dest_tabs_magic_smso xt xt tabs destructive,
magic so char
(t1061)
- eat_newline_glitch xenl xn newline ignored
+ eat_newline_glitch xenl xn newline ignored
after 80 cols (con-
cept)
- erase_overstrike eo eo can erase over-
+ erase_overstrike eo eo can erase over-
strikes with a blank
- generic_type gn gn generic line type
- hard_copy hc hc hardcopy terminal
- hard_cursor chts HC cursor is hard to
+ generic_type gn gn generic line type
+ hard_copy hc hc hardcopy terminal
+ hard_cursor chts HC cursor is hard to
see
- has_meta_key km km Has a meta key
+ has_meta_key km km Has a meta key
(i.e., sets 8th-bit)
- has_print_wheel daisy YC printer needs opera-
+ has_print_wheel daisy YC printer needs opera-
tor to change char-
acter set
- has_status_line hs hs has extra status
+ has_status_line hs hs has extra status
line
- hue_lightness_saturation hls hl terminal uses only
+ hue_lightness_saturation hls hl terminal uses only
HLS color notation
(Tektronix)
- insert_null_glitch in in insert mode distin-
+ insert_null_glitch in in insert mode distin-
guishes nulls
- lpi_changes_res lpix YG changing line pitch
+ lpi_changes_res lpix YG changing line pitch
changes resolution
- memory_above da da display may be
+ memory_above da da display may be
retained above the
screen
- memory_below db db display may be
+ memory_below db db display may be
retained below the
screen
- move_insert_mode mir mi safe to move while
+ move_insert_mode mir mi safe to move while
in insert mode
- move_standout_mode msgr ms safe to move while
+ move_standout_mode msgr ms safe to move while
in standout mode
- needs_xon_xoff nxon nx padding will not
+ needs_xon_xoff nxon nx padding will not
work, xon/xoff
required
- no_esc_ctlc xsb xb beehive (f1=escape,
+ no_esc_ctlc xsb xb beehive (f1=escape,
f2=ctrl C)
- no_pad_char npc NP pad character does
+ no_pad_char npc NP pad character does
not exist
- non_dest_scroll_region ndscr ND scrolling region is
+ non_dest_scroll_region ndscr ND scrolling region is
non-destructive
- non_rev_rmcup nrrmc NR smcup does not
+ non_rev_rmcup nrrmc NR smcup does not
reverse rmcup
- over_strike os os terminal can over-
+ over_strike os os terminal can over-
strike
- prtr_silent mc5i 5i printer will not
+ prtr_silent mc5i 5i printer will not
echo on screen
- row_addr_glitch xvpa YD only positive motion
+ row_addr_glitch xvpa YD only positive motion
for vpa/mvpa caps
- semi_auto_right_margin sam YE printing in last
+ semi_auto_right_margin sam YE printing in last
column causes cr
- status_line_esc_ok eslok es escape can be used
+ status_line_esc_ok eslok es escape can be used
on the status line
- tilde_glitch hz hz cannot print ~'s
- (hazeltine)
+ tilde_glitch hz hz cannot print ~'s
+ (Hazeltine)
- transparent_underline ul ul underline character
+ transparent_underline ul ul underline character
overstrikes
- xon_xoff xon xo terminal uses
+ xon_xoff xon xo terminal uses
xon/xoff handshaking
These are the numeric capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- columns cols co number of columns in
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ columns cols co number of columns in
a line
- init_tabs it it tabs initially every
+ init_tabs it it tabs initially every
# spaces
- label_height lh lh rows in each label
- label_width lw lw columns in each
+ label_height lh lh rows in each label
+ label_width lw lw columns in each
label
- lines lines li number of lines on
+ lines lines li number of lines on
screen or page
- lines_of_memory lm lm lines of memory if >
+ lines_of_memory lm lm lines of memory if >
line. 0 means varies
- magic_cookie_glitch xmc sg number of blank
+ magic_cookie_glitch xmc sg number of blank
characters left by
smso or rmso
- max_attributes ma ma maximum combined
+ max_attributes ma ma maximum combined
attributes terminal
can handle
- max_colors colors Co maximum number of
+ max_colors colors Co maximum number of
colors on screen
- max_pairs pairs pa maximum number of
+ max_pairs pairs pa maximum number of
color-pairs on the
screen
- maximum_windows wnum MW maximum number of
- defineable windows
- no_color_video ncv NC video attributes
+ maximum_windows wnum MW maximum number of
+ definable windows
+ no_color_video ncv NC video attributes
that cannot be used
with colors
- num_labels nlab Nl number of labels on
+ num_labels nlab Nl number of labels on
screen
- padding_baud_rate pb pb lowest baud rate
+ padding_baud_rate pb pb lowest baud rate
where padding needed
- virtual_terminal vt vt virtual terminal
+ virtual_terminal vt vt virtual terminal
number (CB/unix)
- width_status_line wsl ws number of columns in
+ width_status_line wsl ws number of columns in
status line
- The following numeric capabilities are present in the
- SVr4.0 term structure, but are not yet documented in the
+ The following numeric capabilities are present in the
+ SVr4.0 term structure, but are not yet documented in the
man page. They came in with SVr4's printer support.
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- bit_image_entwining bitwin Yo number of passes for
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ bit_image_entwining bitwin Yo number of passes for
each bit-image row
- bit_image_type bitype Yp type of bit-image
+ bit_image_type bitype Yp type of bit-image
device
- buffer_capacity bufsz Ya numbers of bytes
+ buffer_capacity bufsz Ya numbers of bytes
buffered before
printing
- buttons btns BT number of buttons on
+ buttons btns BT number of buttons on
mouse
- dot_horz_spacing spinh Yc spacing of dots hor-
+ dot_horz_spacing spinh Yc spacing of dots hor-
izontally in dots
per inch
- dot_vert_spacing spinv Yb spacing of pins ver-
+ dot_vert_spacing spinv Yb spacing of pins ver-
tically in pins per
inch
- max_micro_address maddr Yd maximum value in
+ max_micro_address maddr Yd maximum value in
micro_..._address
- max_micro_jump mjump Ye maximum value in
+ max_micro_jump mjump Ye maximum value in
parm_..._micro
- micro_col_size mcs Yf character step size
+ micro_col_size mcs Yf character step size
when in micro mode
- micro_line_size mls Yg line step size when
+ micro_line_size mls Yg line step size when
in micro mode
- number_of_pins npins Yh numbers of pins in
+ number_of_pins npins Yh numbers of pins in
print-head
- output_res_char orc Yi horizontal resolu-
+ output_res_char orc Yi horizontal resolu-
tion in units per
line
- output_res_horz_inch orhi Yk horizontal resolu-
+ output_res_horz_inch orhi Yk horizontal resolu-
tion in units per
inch
- output_res_line orl Yj vertical resolution
+ output_res_line orl Yj vertical resolution
in units per line
- output_res_vert_inch orvi Yl vertical resolution
+ output_res_vert_inch orvi Yl vertical resolution
in units per inch
- print_rate cps Ym print rate in char-
+ print_rate cps Ym print rate in char-
acters per second
- wide_char_size widcs Yn character step size
+ wide_char_size widcs Yn character step size
when in double wide
mode
prototype !?
create_window cwin CW define a window #1
from #2,#3 to #4,#5
- cursor_address cup cm move to row #1
- columns #2
+ cursor_address cup cm move to row #1 col-
+ umns #2
cursor_down cud1 do down one line
cursor_home home ho home cursor (if no
cup)
multiple codesets
color_names colornm Yw Give name for
color #1
- define_bit_image_region defbi Yx Define rectan-
- gualar bit image
- region
+ define_bit_image_region defbi Yx Define rectangular
+ bit image region
device_type devt dv Indicate lan-
guage/codeset sup-
port
set_page_length slines YZ Set page length to
#1 lines
+
set_tb_margin smgtb MT Sets both top and
bottom margins to
#1, #2
- The XSI Curses standard added these. They are some
- post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. The <STRONG>ncurses</STRONG> termcap names for them are
- invented; according to the XSI Curses standard, they have
- no termcap names. If your compiled terminfo entries use
- these, they may not be binary-compatible with System V
- terminfo entries after SVr4.1; beware!
+ The XSI Curses standard added these hardcopy capabili-
+ ties. They were used in some post-4.1 versions of System
+ V curses, e.g., Solaris 2.5 and IRIX 6.x. Except for <STRONG>YI</STRONG>,
+ the <STRONG>ncurses</STRONG> termcap names for them are invented. Accord-
+ ing to the XSI Curses standard, they have no termcap
+ names. If your compiled terminfo entries use these, they
+ may not be binary-compatible with System V terminfo
+ entries after SVr4.1; beware!
<STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
set_a_attributes sgr1 sA Define second set of
video attributes
#1-#6
- set_pglen_inch slengthsL YI Set page length
- to #1 hundredth of
- an inch
-
-
- <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
+ set_pglen_inch slengthYI Set page length to
+ #1 hundredth of an
+ inch (some implemen-
+ tations use sL for
+ termcap).
+
+
+</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
+ The preceding section listed the <EM>predefined</EM> capabilities.
+ They deal with some special features for terminals no
+ longer (or possibly never) produced. Occasionally there
+ are special features of newer terminals which are awkward
+ or impossible to represent by reusing the predefined capa-
+ bilities.
+
+ <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
+ capabilities. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG>
+ option for this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats
+ unknown capabilities as user-defined. That is, if <STRONG>tic</STRONG>
+ encounters a capability name which it does not recognize,
+ it infers its type (boolean, number or string) from the
+ syntax and makes an extended table entry for that capabil-
+ ity. The <STRONG>use_extended_names</STRONG> function makes this informa-
+ tion conditionally available to applications. The ncurses
+ library provides the data leaving most of the behavior to
+ applications:
+
+ <STRONG>o</STRONG> User-defined capability strings whose name begins with
+ "k" are treated as function keys.
+
+ <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG>
+ can be inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
+
+ <STRONG>o</STRONG> If the capability name happens to be two characters,
+ the capability is also available through the termcap
+ interface.
+
+ While termcap is said to be extensible because it does not
+ use a predefined set of capabilities, in practice it has
+ been limited to the capabilities defined by terminfo
+ implementations. As a rule, user-defined capabilities
+ intended for use by termcap applications should be limited
+ to booleans and numbers to avoid running past the 1023
+ byte limit assumed by termcap implementations and their
+ applications. In particular, providing extended sets of
+ function keys (past the 60 numbered keys and the handful
+ of special named keys) is best done using the longer names
+ available using terminfo.
+
+
+</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
The following entry, describing an ANSI-standard terminal,
- is representative of what a <STRONG>terminfo</STRONG> entry for a modern
+ is representative of what a <STRONG>terminfo</STRONG> entry for a modern
terminal typically looks like.
- ansi|ansi/pc-term compatible with color,
- mc5i,
- colors#8, ncv#3, pairs#64,
- cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
- cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
- ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%p1%dG, ht=\E[I,
- ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, .indn=\E[%p1%dT,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf1=\E[M, kf10=\E[V,
- kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P,
- kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
- kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
- op=\E[37;40m, rep=%p1%c\E[%p2%{1}%-%db,
- rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B,
- s3ds=\E+B, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m,
- sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
- u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
-
- Entries may continue onto multiple lines by placing white
- space at the beginning of each line except the first.
- Comments may be included on lines beginning with ``#''.
- Capabilities in <EM>terminfo</EM> are of three types: Boolean capa-
- bilities which indicate that the terminal has some
- particular feature, numeric capabilities giving the size
- of the terminal or the size of particular delays, and
- string capabilities, which give a sequence which can be
- used to perform particular terminal operations.
-
-
- <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
- All capabilities have names. For instance, the fact that
- ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
- automatic return and line-feed when the end of a line is
- reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
+ ansi|ansi/pc-term compatible with color,
+ am, mc5i, mir, msgr,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260
+ j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303
+ u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=\E[I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+ mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, op=\E[39;49m,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rin=\E[%p1%dT,
+ rmacs=\E[10m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
+ s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;
+ %?%p2%t;4%;
+ %?%p3%t;7%;
+ %?%p4%t;5%;
+ %?%p6%t;1%;
+ %?%p7%t;8%;
+ %?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
+
+ Entries may continue onto multiple lines by placing white
+ space at the beginning of each line except the first.
+ Comments may be included on lines beginning with "#".
+ Capabilities in <EM>terminfo</EM> are of three types:
+
+ <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal
+ has some particular feature,
+
+ <STRONG>o</STRONG> numeric capabilities giving the size of the terminal
+ or the size of particular delays, and
+
+ <STRONG>o</STRONG> string capabilities, which give a sequence which can
+ be used to perform particular terminal operations.
+
+
+</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
+ All capabilities have names. For instance, the fact that
+ ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
+ automatic return and line-feed when the end of a line is
+ reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
- followed by the character `#' and then a positive value.
- Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
- minal has, gives the value `80' for ansi. Values for
+ followed by the character "#" and then a positive value.
+ Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
+ minal has, gives the value "80" for ansi. Values for
numeric capabilities may be specified in decimal, octal or
- hexadecimal, using the C programming language conventions
+ hexadecimal, using the C programming language conventions
(e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
+ Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
end of line sequence) are given by the two-character code,
- an `=', and then a string ending at the next following
- `,'.
+ an "=", and then a string ending at the next following
+ ",".
- A number of escape sequences are provided in the string
+ A number of escape sequences are provided in the string
valued capabilities for easy encoding of characters there.
- Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
- control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
- <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
- backspace, form-feed, and space. Other escapes include <STRONG>\^</STRONG>
- for <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
- (<STRONG>\0</STRONG> will produce \200, which does not terminate a string
- but behaves as a null character on most terminals, provid-
- ing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.) Finally, characters
- may be given as three octal digits after a <STRONG>\</STRONG>.
-
- A delay in milliseconds may appear anywhere in a string
- capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
- and padding characters are supplied by <EM>tputs</EM> to provide
- this delay. The delay must be a number with at most one
+ Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
+ control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
+ <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
+ backspace, form-feed, and space. Other escapes include
+
+ <STRONG>o</STRONG> <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
+
+ <STRONG>o</STRONG> <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
+
+ <STRONG>o</STRONG> <STRONG>\</STRONG>, for comma,
+
+ <STRONG>o</STRONG> <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
+
+ <STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
+
+ <STRONG>\0</STRONG> will produce \200, which does not terminate a
+ string but behaves as a null character on most termi-
+ nals, providing CS7 is specified. See <STRONG>stty(1)</STRONG>.
+
+ The reason for this quirk is to maintain binary com-
+ patibility of the compiled terminfo files with other
+ implementations, e.g., the SVr4 systems, which docu-
+ ment this. Compiled terminfo files use null-termi-
+ nated strings, with no lengths. Modifying this would
+ require a new binary format, which would not work with
+ other implementations.
+
+ Finally, characters may be given as three octal digits
+ after a <STRONG>\</STRONG>.
+
+ A delay in milliseconds may appear anywhere in a string
+ capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
+ and padding characters are supplied by <EM>tputs</EM> to provide
+ this delay. The delay must be a number with at most one
decimal place of precision; it may be followed by suffixes
- `*' or '/' or both. A `*' indicates that the padding
- required is proportional to the number of lines affected
- by the operation, and the amount given is the per-
- affected-unit padding required. (In the case of insert
+ "*" or "/" or both. A "*" indicates that the padding
+ required is proportional to the number of lines affected
+ by the operation, and the amount given is the per-
+ affected-unit padding required. (In the case of insert
character, the factor is still the number of <EM>lines</EM>
- affected.) Normally, padding is advisory if the device
- has the <STRONG>xon</STRONG> capability; it is used for cost computation
- but does not trigger delays. A `/' suffix indicates that
- the padding is mandatory and forces a delay of the given
- number of milliseconds even on devices for which <STRONG>xon</STRONG> is
+ affected.) Normally, padding is advisory if the device
+ has the <STRONG>xon</STRONG> capability; it is used for cost computation
+ but does not trigger delays. A "/" suffix indicates that
+ the padding is mandatory and forces a delay of the given
+ number of milliseconds even on devices for which <STRONG>xon</STRONG> is
present to indicate flow control.
- Sometimes individual capabilities must be commented out.
- To do this, put a period before the capability name. For
+ Sometimes individual capabilities must be commented out.
+ To do this, put a period before the capability name. For
example, see the second <STRONG>ind</STRONG> in the example above.
- <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
- If the environment variable TERMINFO is set, it is inter-
- preted as the pathname of a directory containing the com-
- piled description you are working on. Only that directory
- is searched.
+</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
+ The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
+ several places. It uses only the first description found.
+ The library has a compiled-in list of places to search
+ which can be overridden by environment variables. Before
+ starting to search, <STRONG>ncurses</STRONG> eliminates duplicates in its
+ search list.
+
+ <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is
+ interpreted as the pathname of a directory containing
+ the compiled description you are working on. Only
+ that directory is searched.
+
+ <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in
+ the directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
+ tion.
- If TERMINFO is not set, the <STRONG>ncurses</STRONG> version of the ter-
- minfo reader code will instead look in the directory
- <STRONG>$HOME/.terminfo</STRONG> for a compiled description. If it fails
- to find one there, and the environment variable TER-
- MINFO_DIRS is set, it will interpret the contents of that
- variable as a list of colon- separated directories to be
- searched (an empty entry is interpreted as a command to
- search <EM>/usr/share/terminfo</EM>). If no description is found
- in any of the TERMINFO_DIRS directories, the fetch fails.
+ <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is
+ set, <STRONG>ncurses</STRONG> will interpret the contents of that vari-
+ able as a list of colon-separated directories (or
+ database files) to be searched.
- If neither TERMINFO nor TERMINFO_DIRS is set, the last
- place tried will be the system terminfo directory,
- <EM>/usr/share/terminfo</EM>.
+ An empty directory name (i.e., if the variable begins
+ or ends with a colon, or contains adjacent colons) is
+ interpreted as the system location <EM>/usr/share/ter-</EM>
+ <EM>minfo</EM>.
- (Neither the <STRONG>$HOME/.terminfo</STRONG> lookups nor TERMINFO_DIRS
- extensions are supported under stock System V ter-
- minfo/curses.)
+ <STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
+ <STRONG>o</STRONG> a list of directories
+ (/usr/local/ncurses/share/terminfo:/usr/share/ter-
+ minfo), and
- <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
+ <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM>
+ (the compiled-in default).
+
+
+</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
We now outline how to prepare descriptions of terminals.
The most effective way to prepare a terminal description
is by imitating the description of a similar terminal in
To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the `u' key several times
+ middle of the screen, then hit the "u" key several times
quickly. If the terminal messes up, more padding is usu-
ally needed. A similar test can be used for insert char-
acter.
- <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
+</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
The number of columns on each line for the terminal is
given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
a CRT, then the number of lines on the screen is given by
as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
cursor motions should not alter the text they pass over,
- for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
+ for example, you would not normally use "<STRONG>cuf1</STRONG>= " because
the space would erase the character moved over.
A very important point here is that the local cursor
left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
To scroll text down, a program goes to the top left corner
- of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
- The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
+ of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
+ The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
respective corners of the screen.
Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG>
and <STRONG>rin</STRONG> which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except
- that they take one parameter, and scroll that many lines.
- They are also undefined except at the appropriate edge of
+ that they take one parameter, and scroll that many lines.
+ They are also undefined except at the appropriate edge of
the screen.
- The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
- right edge of the screen when text is output, but this
+ The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
+ right edge of the screen when text is output, but this
does not necessarily apply to a <STRONG>cuf1</STRONG> from the last column.
- The only local motion which is defined from the left edge
- is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
- move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
- given, the effect is undefined. This is useful for draw-
- ing a box around the edge of the screen, for example. If
- the terminal has switch selectable automatic margins, the
- <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
- If the terminal has a command which moves to the first
- column of the next line, that command can be given as <STRONG>nel</STRONG>
- (newline). It does not matter if the command clears the
- remainder of the current line, so if the terminal has no
- <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
+ The only local motion which is defined from the left edge
+ is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
+ move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
+ given, the effect is undefined. This is useful for draw-
+ ing a box around the edge of the screen, for example. If
+ the terminal has switch selectable automatic margins, the
+ <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
+ If the terminal has a command which moves to the first
+ column of the next line, that command can be given as <STRONG>nel</STRONG>
+ (newline). It does not matter if the command clears the
+ remainder of the current line, so if the terminal has no
+ <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
out of one or both of them.
These capabilities suffice to describe hard-copy and
- "glass-tty" terminals. Thus the model 33 teletype is
+ "glass-tty" terminals. Thus the model 33 teletype is
described as
33|tty33|tty|model 33 teletype,
- bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
+ bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
while the Lear Siegler ADM-3 is described as
adm3|3|lsi adm3,
- am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
- ind=^J, lines#24,
+ am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
+ ind=^J, lines#24,
- <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
- Cursor addressing and other strings requiring parameters
- in the terminal are described by a parameterized string
- capability, with <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
- example, to address the cursor, the <STRONG>cup</STRONG> capability is
+</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
+ Cursor addressing and other strings requiring parameters
+ in the terminal are described by a parameterized string
+ capability, with <EM>printf</EM>-like escapes such as <EM>%x</EM> in it.
+ For example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
- memory.) If the terminal has memory relative cursor
+ memory.) If the terminal has memory relative cursor
addressing, that can be indicated by <STRONG>mrcup</STRONG>.
- The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
- to manipulate it. Typically a sequence will push one of
- the parameters onto the stack and then print it in some
- format. Print (e.g., "%d") is a special case. Other
- operations, including "%t" pop their operand from the
+ The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
+ to manipulate it. Typically a sequence will push one of
+ the parameters onto the stack and then print it in some
+ format. Print (e.g., "%d") is a special case. Other
+ operations, including "%t" pop their operand from the
stack. It is noted that more complex operations are often
necessary, e.g., in the <STRONG>sgr</STRONG> string.
The <STRONG>%</STRONG> encodings have the following meanings:
+ <STRONG>%%</STRONG> outputs "%"
- %% outputs `%'
-
- %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are [-+#] and space
+ <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
+ as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":"
+ to allow the next character to be a "-" flag, avoid-
+ ing interpreting "%-" as an operator.
%c print pop() like %c in <STRONG>printf</STRONG>
- %s print pop() like %s in <STRONG>printf</STRONG>
+ <STRONG>%s</STRONG> print pop() like %s in <STRONG>printf</STRONG>
- %p[1-9]
+ <STRONG>%p</STRONG><EM>[1-9]</EM>
push <EM>i</EM>'th parameter
- %P[a-z]
- set dynamic variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[a-z]</EM>
+ set dynamic variable <EM>[a-z]</EM> to pop()
- %g[a-z]
- get dynamic variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[a-z]/</EM>
+ get dynamic variable <EM>[a-z]</EM> and push it
- %P[A-Z]
- set static variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[A-Z]</EM>
+ set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
- %g[A-Z]
- get static variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[A-Z]</EM>
+ get static variable <EM>[a-z]</EM> and push it
- The terms "static" and "dynamic" are misleading.
- Historically, these are simply two different sets of
- variables, whose values are not reset between calls
- to <STRONG>tparm</STRONG>. However, that fact is not documented in
- other implementations. Relying on it will adversely
+ The terms "static" and "dynamic" are misleading.
+ Historically, these are simply two different sets of
+ variables, whose values are not reset between calls
+ to <STRONG>tparm</STRONG>. However, that fact is not documented in
+ other implementations. Relying on it will adversely
impact portability to other implementations.
- %'<EM>c</EM>' char constant <EM>c</EM>
+ <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
- %{<EM>nn</EM>}
+ <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
integer constant <EM>nn</EM>
- %l push strlen(pop)
+ <STRONG>%l</STRONG> push strlen(pop)
- %+ %- %* %/ %m
- arithmetic (%m is mod): push(pop() op pop())
+ <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
+ arithmetic (%m is mod): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %& %| %^
- bit operations (AND, OR and exclusive-OR): push(pop()
- op pop())
+ <STRONG>%&</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
+ bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM>
+ <EM>op</EM> <EM>pop())</EM>
- %= %> %<
- logical operations: push(pop() op pop())
+ <STRONG>%=</STRONG>, <STRONG>%></STRONG>, <STRONG>%<</STRONG>
+ logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %A, %O
+ <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
logical AND and OR operations (for conditionals)
- %! %~
- unary operations (logical and bit complement):
+ <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
+ unary operations (logical and bit complement):
push(op pop())
- %i add 1 to first two parameters (for ANSI terminals)
+ <STRONG>%i</STRONG> add 1 to first two parameters (for ANSI terminals)
- %? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
- This forms an if-then-else. The %e <EM>elsepart</EM> is
- optional. Usually the %? <EM>expr</EM> part pushes a value
- onto the stack, and %t pops it from the stack,
- testing if it is nonzero (true). If it is zero
- (false), control passes to the %e (else) part.
+ <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
+ This forms an if-then-else. The <STRONG>%e</STRONG> <EM>elsepart</EM> is
+ optional. Usually the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value
+ onto the stack, and <STRONG>%t</STRONG> pops it from the stack, test-
+ ing if it is nonzero (true). If it is zero (false),
+ control passes to the <STRONG>%e</STRONG> (else) part.
It is possible to form else-if's a la Algol 68:
- %? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
+ <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
where ci are conditions, bi are bodies.
Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
- ture of if-the-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
+ ture of if-then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
be very complicated when written on one line. The <STRONG>-f</STRONG>
option splits the string into lines with the parts
indented.
Binary operations are in postfix form with the operands in
the usual order. That is, to get x-5 one would use
- "%gx%{5}%-". %P and %g variables are persistent across
+ "%gx%{5}%-". <STRONG>%P</STRONG> and <STRONG>%g</STRONG> variables are persistent across
escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12,
its. Thus its <STRONG>cup</STRONG> capability is "cup=6\E&%p2%2dc%p1%2dY".
The Microterm ACT-IV needs the current row and column sent
- preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
- in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
- need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
+ preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
+ in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
+ need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
move the cursor up one line on the screen (<STRONG>cuu1</STRONG>). This is
- necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
- and <STRONG>\r</STRONG>, as the system may change or discard them. (The
- library routines dealing with terminfo set tty modes so
+ necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
+ and <STRONG>\r</STRONG>, as the system may change or discard them. (The
+ library routines dealing with terminfo set tty modes so
that tabs are never expanded, so \t is safe to send. This
turns out to be essential for the Ann Arbor 4080.)
A final example is the LSI ADM-3a, which uses row and col-
umn offset by a blank character, thus "cup=\E=%p1%'
- '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
- first parameter, pushes the ASCII value for a space (32),
- adds them (pushing the sum on the stack in place of the
- two previous values) and outputs that value as a charac-
- ter. Then the same is done for the second parameter.
+ '%+%c%p2%' '%+%c". After sending "\E=", this pushes the
+ first parameter, pushes the ASCII value for a space (32),
+ adds them (pushing the sum on the stack in place of the
+ two previous values) and outputs that value as a charac-
+ ter. Then the same is done for the second parameter.
More complex arithmetic is possible using the stack.
- <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
+</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
If the terminal has a fast way to home the cursor (to very
- upper left corner of screen) then this can be given as
- <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
- hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
- with <STRONG>cuu1</STRONG> from the home position, but a program should
- never do this itself (unless <STRONG>ll</STRONG> does) because it can make
- no assumption about the effect of moving up from the home
- position. Note that the home position is the same as
+ upper left corner of screen) then this can be given as
+ <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
+ hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
+ with <STRONG>cuu1</STRONG> from the home position, but a program should
+ never do this itself (unless <STRONG>ll</STRONG> does) because it can make
+ no assumption about the effect of moving up from the home
+ position. Note that the home position is the same as
addressing to (0,0): to the top left corner of the screen,
- not of memory. (Thus, the \EH sequence on HP terminals
+ not of memory. (Thus, the \EH sequence on HP terminals
cannot be used for <STRONG>home</STRONG>.)
If the terminal has row or column absolute cursor address-
- ing, these can be given as single parameter capabilities
+ ing, these can be given as single parameter capabilities
<STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
tion absolute). Sometimes these are shorter than the more
- general two parameter sequence (as with the hp2645) and
+ general two parameter sequence (as with the hp2645) and
can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
- ized local motions (e.g., move <EM>n</EM> spaces to the right)
+ ized local motions (e.g., move <EM>n</EM> spaces to the right)
these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single
- parameter indicating how many spaces to move. These are
- primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
+ parameter indicating how many spaces to move. These are
+ primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running
a program that uses these capabilities, the codes to enter
- and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
- arises, for example, from terminals like the Concept with
- more than one page of memory. If the terminal has only
- memory relative cursor addressing and not screen relative
+ and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
+ arises, for example, from terminals like the Concept with
+ more than one page of memory. If the terminal has only
+ memory relative cursor addressing and not screen relative
cursor addressing, a one screen-sized window must be fixed
- into the terminal for cursor addressing to work properly.
+ into the terminal for cursor addressing to work properly.
This is also used for the TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets
- the command character to be the one used by terminfo. If
- the <STRONG>smcup</STRONG> sequence will not restore the screen after an
+ the command character to be the one used by terminfo. If
+ the <STRONG>smcup</STRONG> sequence will not restore the screen after an
<STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
<STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
- <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
+</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
If the terminal can clear from the current position to the
- end of the line, leaving the cursor where it is, this
+ end of the line, leaving the cursor where it is, this
should be given as <STRONG>el</STRONG>. If the terminal can clear from the
- beginning of the line to the current position inclusive,
- leaving the cursor where it is, this should be given as
- <STRONG>el1</STRONG>. If the terminal can clear from the current position
- to the end of the display, then this should be given as
- <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
- (Thus, it can be simulated by a request to delete a large
+ beginning of the line to the current position inclusive,
+ leaving the cursor where it is, this should be given as
+ <STRONG>el1</STRONG>. If the terminal can clear from the current position
+ to the end of the display, then this should be given as
+ <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
+ (Thus, it can be simulated by a request to delete a large
number of lines, if a true <STRONG>ed</STRONG> is not available.)
- <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
- If the terminal can open a new blank line before the line
- where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
- done only from the first position of a line. The cursor
+</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
+ If the terminal can open a new blank line before the line
+ where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
+ done only from the first position of a line. The cursor
must then appear on the newly blank line. If the terminal
- can delete the line which the cursor is on, then this
- should be given as <STRONG>dl1</STRONG>; this is done only from the first
- position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
- <STRONG>dl1</STRONG> which take a single parameter and insert or delete
+ can delete the line which the cursor is on, then this
+ should be given as <STRONG>dl1</STRONG>; this is done only from the first
+ position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
+ <STRONG>dl1</STRONG> which take a single parameter and insert or delete
that many lines can be given as <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
- If the terminal has a settable scrolling region (like the
- vt100) the command to set this can be described with the
- <STRONG>csr</STRONG> capability, which takes two parameters: the top and
+ If the terminal has a settable scrolling region (like the
+ vt100) the command to set this can be described with the
+ <STRONG>csr</STRONG> capability, which takes two parameters: the top and
bottom lines of the scrolling region. The cursor position
is, alas, undefined after using this command.
- It is possible to get the effect of insert or delete line
+ It is possible to get the effect of insert or delete line
using <STRONG>csr</STRONG> on a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save
- and restore cursor) commands may be useful for ensuring
- that your synthesized insert/delete string does not move
- the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
- synthesis automatically, so you need not compose
+ and restore cursor) commands may be useful for ensuring
+ that your synthesized insert/delete string does not move
+ the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
+ synthesis automatically, so you need not compose
insert/delete strings for an entry with <STRONG>csr</STRONG>).
Yet another way to construct insert and delete might be to
- use a combination of index with the memory-lock feature
- found on some terminals (like the HP-700/90 series, which
+ use a combination of index with the memory-lock feature
+ found on some terminals (like the HP-700/90 series, which
however also has insert/delete).
- Inserting lines at the top or bottom of the screen can
- also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
- true insert/delete line, and is often faster even on
- terminals with those features.
+ Inserting lines at the top or bottom of the screen can
+ also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
+ true insert/delete line, and is often faster even on ter-
+ minals with those features.
- The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
- scrolling window is effectively a view port on a screen-
- sized canvas. To test for this capability, create a
- scrolling region in the middle of the screen, write some-
- thing to the bottom line, move the cursor to the top of
+ The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
+ scrolling window is effectively a view port on a screen-
+ sized canvas. To test for this capability, create a
+ scrolling region in the middle of the screen, write some-
+ thing to the bottom line, move the cursor to the top of
the region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data
- scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
- appears, then scrolling is non-destructive. System V and
- XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
- late destructive scrolling; their documentation cautions
- you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
+ scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
+ appears, then scrolling is non-destructive. System V and
+ XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
+ late destructive scrolling; their documentation cautions
+ you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
implementation is more liberal and will do explicit erases
after scrolling if <STRONG>ndstr</STRONG> is defined.
If the terminal has the ability to define a window as part
- of memory, which all commands affect, it should be given
+ of memory, which all commands affect, it should be given
as the parameterized string <STRONG>wind</STRONG>. The four parameters are
- the starting and ending lines in memory and the starting
+ the starting and ending lines in memory and the starting
and ending columns in memory, in that order.
- If the terminal can retain display memory above, then the
- <STRONG>da</STRONG> capability should be given; if display memory can be
- retained below, then <STRONG>db</STRONG> should be given. These indicate
- that deleting a line or scrolling may bring non-blank
- lines up from below or that scrolling back with <STRONG>ri</STRONG> may
+ If the terminal can retain display memory above, then the
+ <STRONG>da</STRONG> capability should be given; if display memory can be
+ retained below, then <STRONG>db</STRONG> should be given. These indicate
+ that deleting a line or scrolling may bring non-blank
+ lines up from below or that scrolling back with <STRONG>ri</STRONG> may
bring down non-blank lines.
- <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
- There are two basic kinds of intelligent terminals with
- respect to insert/delete character which can be described
- using <EM>terminfo.</EM> The most common insert/delete character
- operations affect only the characters on the current line
- and shift characters off the end of the line rigidly.
- Other terminals, such as the Concept 100 and the Perkin
- Elmer Owl, make a distinction between typed and untyped
- blanks on the screen, shifting upon an insert or delete
- only to an untyped blank on the screen which is either
- eliminated, or expanded to two untyped blanks. You can
- determine the kind of terminal you have by clearing the
- screen and then typing text separated by cursor motions.
- Type "abc def" using local cursor motions (not spaces)
- between the "abc" and the "def". Then position the cursor
- before the "abc" and put the terminal in insert mode. If
- typing characters causes the rest of the line to shift
- rigidly and characters to fall off the end, then your ter-
- minal does not distinguish between blanks and untyped
- positions. If the "abc" shifts over to the "def" which
- then move together around the end of the current line and
- onto the next as you insert, you have the second type of
- terminal, and should give the capability <STRONG>in</STRONG>, which stands
- for "insert null". While these are two logically separate
- attributes (one line versus multi-line insert mode, and
- special treatment of untyped spaces) we have seen no ter-
- minals whose insert mode cannot be described with the sin-
- gle attribute.
-
- Terminfo can describe both terminals which have an insert
+</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
+ There are two basic kinds of intelligent terminals with
+ respect to insert/delete character which can be described
+ using <EM>terminfo.</EM> The most common insert/delete character
+ operations affect only the characters on the current line
+ and shift characters off the end of the line rigidly.
+ Other terminals, such as the Concept 100 and the Perkin
+ Elmer Owl, make a distinction between typed and untyped
+ blanks on the screen, shifting upon an insert or delete
+ only to an untyped blank on the screen which is either
+ eliminated, or expanded to two untyped blanks.
+
+ You can determine the kind of terminal you have by clear-
+ ing the screen and then typing text separated by cursor
+ motions. Type "abc def" using local cursor motions
+ (not spaces) between the "abc" and the "def". Then posi-
+ tion the cursor before the "abc" and put the terminal in
+ insert mode. If typing characters causes the rest of the
+ line to shift rigidly and characters to fall off the end,
+ then your terminal does not distinguish between blanks and
+ untyped positions. If the "abc" shifts over to the "def"
+ which then move together around the end of the current
+ line and onto the next as you insert, you have the second
+ type of terminal, and should give the capability <STRONG>in</STRONG>, which
+ stands for "insert null".
+
+ While these are two logically separate attributes (one
+ line versus multi-line insert mode, and special treatment
+ of untyped spaces) we have seen no terminals whose insert
+ mode cannot be described with the single attribute.
+
+ Terminfo can describe both terminals which have an insert
mode, and terminals which send a simple sequence to open a
- blank position on the current line. Give as <STRONG>smir</STRONG> the
- sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
- sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
+ blank position on the current line. Give as <STRONG>smir</STRONG> the
+ sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
+ sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
sequence needed to be sent just before sending the charac-
- ter to be inserted. Most terminals with a true insert
- mode will not give <STRONG>ich1</STRONG>; terminals which send a sequence
+ ter to be inserted. Most terminals with a true insert
+ mode will not give <STRONG>ich1</STRONG>; terminals which send a sequence
to open a screen position should give it here.
- If your terminal has both, insert mode is usually prefer-
- able to <STRONG>ich1</STRONG>. Technically, you should not give both
- unless the terminal actually requires both to be used in
- combination. Accordingly, some non-curses applications
- get confused if both are present; the symptom is doubled
+ If your terminal has both, insert mode is usually prefer-
+ able to <STRONG>ich1</STRONG>. Technically, you should not give both
+ unless the terminal actually requires both to be used in
+ combination. Accordingly, some non-curses applications
+ get confused if both are present; the symptom is doubled
characters in an update using insert. This requirement is
now rare; most <STRONG>ich</STRONG> sequences do not require previous smir,
and most smir insert modes do not require <STRONG>ich1</STRONG> before each
- character. Therefore, the new <STRONG>curses</STRONG> actually assumes
- this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
+ character. Therefore, the new <STRONG>curses</STRONG> actually assumes
+ this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
appropriate (but not both). If you have to write an entry
- to be used under new curses for a terminal old enough to
+ to be used under new curses for a terminal old enough to
need both, include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
If post insert padding is needed, give this as a number of
- milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
- which may need to be sent after an insert of a single
+ milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
+ which may need to be sent after an insert of a single
character may also be given in <STRONG>ip</STRONG>. If your terminal needs
- both to be placed into an `insert mode' and a special code
- to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
- and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
+ both to be placed into an "insert mode" and a special code
+ to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
+ and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
capability, with one parameter, <EM>n</EM>, will repeat the effects
of <STRONG>ich1</STRONG> <EM>n</EM> times.
If padding is necessary between characters typed while not
- in insert mode, give this as a number of milliseconds
- padding in <STRONG>rmp</STRONG>.
-
- It is occasionally necessary to move around while in
- insert mode to delete characters on the same line (e.g.,
- if there is a tab after the insertion position). If your
- terminal allows motion while in insert mode you can give
- the capability <STRONG>mir</STRONG> to speed up inserting in this case.
- Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
+ in insert mode, give this as a number of milliseconds pad-
+ ding in <STRONG>rmp</STRONG>.
+
+ It is occasionally necessary to move around while in
+ insert mode to delete characters on the same line (e.g.,
+ if there is a tab after the insertion position). If your
+ terminal allows motion while in insert mode you can give
+ the capability <STRONG>mir</STRONG> to speed up inserting in this case.
+ Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
(notably Datamedia's) must not have <STRONG>mir</STRONG> because of the way
their insert mode works.
- Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
- ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
- and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
- delete mode (any mode the terminal needs to be placed in
+ Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
+ ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
+ and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
+ delete mode (any mode the terminal needs to be placed in
for <STRONG>dch1</STRONG> to work).
- A command to erase <EM>n</EM> characters (equivalent to outputting
- <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
+ A command to erase <EM>n</EM> characters (equivalent to outputting
+ <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
with one parameter.
- <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
+</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
If your terminal has one or more kinds of display
- attributes, these can be represented in a number of dif-
+ attributes, these can be represented in a number of dif-
ferent ways. You should choose one display form as <EM>stand-</EM>
<EM>out</EM> <EM>mode</EM>, representing a good, high contrast, easy-on-the-
- eyes, format for highlighting error messages and other
- attention getters. (If you have a choice, reverse video
- plus half-bright is good, or reverse video alone.) The
- sequences to enter and exit standout mode are given as
- <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
- or out of standout mode leaves one or even two blank
- spaces on the screen, as the TVI 912 and Teleray 1061 do,
+ eyes, format for highlighting error messages and other
+ attention getters. (If you have a choice, reverse video
+ plus half-bright is good, or reverse video alone.) The
+ sequences to enter and exit standout mode are given as
+ <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
+ or out of standout mode leaves one or even two blank spa-
+ ces on the screen, as the TVI 912 and Teleray 1061 do,
then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
Codes to begin underlining and end underlining can be
For example, the DEC vt220 supports most of the modes:
+ <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
- <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
-
- none none \E[0m
- p1 standout \E[0;1;7m
- p2 underline \E[0;4m
- p3 reverse \E[0;7m
- p4 blink \E[0;5m
- p5 dim not available
- p6 bold \E[0;1m
- p7 invis \E[0;8m
- p8 protect not used
- p9 altcharset ^O (off) ^N (on)
+ none none \E[0m
+ p1 standout \E[0;1;7m
+ p2 underline \E[0;4m
+ p3 reverse \E[0;7m
+ p4 blink \E[0;5m
+ p5 dim not available
+ p6 bold \E[0;1m
+ p7 invis \E[0;8m
+ p8 protect not used
+ p9 altcharset ^O (off) ^N (on)
We begin each escape sequence by turning off any existing
modes, since there is no quick way to determine whether
Writing out the above sequences, along with their depen-
dencies yields
+ <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
- <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
-
- \E[0 always \E[0
- ;1 if p1 or p6 %?%p1%p6%|%t;1%;
- ;4 if p2 %?%p2%|%t;4%;
- ;5 if p4 %?%p4%|%t;5%;
- ;7 if p1 or p3 %?%p1%p3%|%t;7%;
-
- ;8 if p7 %?%p7%|%t;8%;
- m always m
- ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
+ \E[0 always \E[0
+ ;1 if p1 or p6 %?%p1%p6%|%t;1%;
+ ;4 if p2 %?%p2%|%t;4%;
+ ;5 if p4 %?%p4%|%t;5%;
+ ;7 if p1 or p3 %?%p1%p3%|%t;7%;
+ ;8 if p7 %?%p7%|%t;8%;
+ m always m
+ ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
Putting this all together into the sgr sequence gives:
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
- %?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
+ %?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
Remember that if you specify sgr, you must also specify
sgr0. Also, some implementations rely on sgr being given
assumes that sgr0 does not exit alternate character set
mode.
- Terminals with the ``magic cookie'' glitch (<STRONG>xmc</STRONG>) deposit
- special ``cookies'' when they receive mode-setting
+ Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit
+ special "cookies" when they receive mode-setting
sequences, which affect the display algorithm rather than
having extra bits for each character. Some terminals,
such as the HP 2621, automatically leave standout mode
giving <STRONG>eo</STRONG>.
- <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
+</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
If the terminal has a keypad that transmits codes when the
keys are pressed, this information can be given. Note
that it is not possible to handle terminals where the key-
unshifted HP 2621 keys). If the keypad can be set to
transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
<STRONG>rmkx</STRONG>. Otherwise the keypad is assumed to always transmit.
- The codes sent by the left arrow, right arrow, up arrow,
- down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
- <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
- tion keys such as f0, f1, ..., f10, the codes they send
- can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
- labels other than the default f0 through f10, the labels
- can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>. The codes transmit-
- ted by certain other special keys can be given: <STRONG>kll</STRONG> (home
- down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear all tabs), <STRONG>kctab</STRONG>
- (clear the tab stop in this column), <STRONG>kclr</STRONG> (clear screen or
- erase key), <STRONG>kdch1</STRONG> (delete character), <STRONG>kdl1</STRONG> (delete line),
- <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end of line), <STRONG>ked</STRONG>
- (clear to end of screen), <STRONG>kich1</STRONG> (insert character or enter
- insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG> (next page), <STRONG>kpp</STRONG>
- (previous page), <STRONG>kind</STRONG> (scroll forward/down), <STRONG>kri</STRONG> (scroll
- backward/up), <STRONG>khts</STRONG> (set a tab stop in this column). In
- addition, if the keypad has a 3 by 3 array of keys includ-
- ing the four arrow keys, the other five keys can be given
- as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful
- when the effects of a 3 by 3 directional pad are needed.
-
- Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
- <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
- be specified as <STRONG>pln</STRONG>. Each of these strings takes two
- parameters: the function key number to program (from 0 to
- 10) and the string to program it with. Function key num-
- bers out of this range may program undefined keys in a
- terminal dependent manner. The difference between the
- capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
- to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
+
+ The codes sent by the left arrow, right arrow, up arrow,
+ down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
+ <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
+ tion keys such as f0, f1, ..., f10, the codes they send
+ can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
+ labels other than the default f0 through f10, the labels
+ can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
+
+ The codes transmitted by certain other special keys can be
+ given:
+
+ <STRONG>o</STRONG> <STRONG>kll</STRONG> (home down),
+
+ <STRONG>o</STRONG> <STRONG>kbs</STRONG> (backspace),
+
+ <STRONG>o</STRONG> <STRONG>ktbc</STRONG> (clear all tabs),
+
+ <STRONG>o</STRONG> <STRONG>kctab</STRONG> (clear the tab stop in this column),
+
+ <STRONG>o</STRONG> <STRONG>kclr</STRONG> (clear screen or erase key),
+
+ <STRONG>o</STRONG> <STRONG>kdch1</STRONG> (delete character),
+
+ <STRONG>o</STRONG> <STRONG>kdl1</STRONG> (delete line),
+
+ <STRONG>o</STRONG> <STRONG>krmir</STRONG> (exit insert mode),
+
+ <STRONG>o</STRONG> <STRONG>kel</STRONG> (clear to end of line),
+
+ <STRONG>o</STRONG> <STRONG>ked</STRONG> (clear to end of screen),
+
+ <STRONG>o</STRONG> <STRONG>kich1</STRONG> (insert character or enter insert mode),
+
+ <STRONG>o</STRONG> <STRONG>kil1</STRONG> (insert line),
+
+ <STRONG>o</STRONG> <STRONG>knp</STRONG> (next page),
+
+ <STRONG>o</STRONG> <STRONG>kpp</STRONG> (previous page),
+
+ <STRONG>o</STRONG> <STRONG>kind</STRONG> (scroll forward/down),
+
+ <STRONG>o</STRONG> <STRONG>kri</STRONG> (scroll backward/up),
+
+ <STRONG>o</STRONG> <STRONG>khts</STRONG> (set a tab stop in this column).
+
+ In addition, if the keypad has a 3 by 3 array of keys
+ including the four arrow keys, the other five keys can be
+ given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are use-
+ ful when the effects of a 3 by 3 directional pad are
+ needed.
+
+ Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
+ <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
+ be specified as <STRONG>pln</STRONG>. Each of these strings takes two
+ parameters: the function key number to program (from 0 to
+ 10) and the string to program it with. Function key num-
+ bers out of this range may program undefined keys in a
+ terminal dependent manner. The difference between the
+ capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
+ to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
causes the string to be executed by the terminal in local;
- and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
+ and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
puter.
The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
- grammable screen labels and their width and height. If
- there are commands to turn the labels on and off, give
- them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
+ grammable screen labels and their width and height. If
+ there are commands to turn the labels on and off, give
+ them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
or more pln sequences to make sure that the change becomes
visible.
- <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
- If the terminal has hardware tabs, the command to advance
- to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
- I). A ``back-tab'' command which moves leftward to the
- preceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
- the teletype modes indicate that tabs are being expanded
- by the computer rather than being sent to the terminal,
- programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
- present, since the user may not have the tab stops prop-
- erly set. If the terminal has hardware tabs which are
- initially set every <EM>n</EM> spaces when the terminal is powered
- up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
- of spaces the tabs are set to. This is normally used by
- the <EM>tset</EM> command to determine whether to set the mode for
- hardware tab expansion, and whether to set the tab stops.
- If the terminal has tab stops that can be saved in non-
- volatile memory, the terminfo description can assume that
+</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
+ If the terminal has hardware tabs, the command to advance
+ to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
+ I). A "back-tab" command which moves leftward to the pre-
+ ceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
+ the teletype modes indicate that tabs are being expanded
+ by the computer rather than being sent to the terminal,
+ programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
+ present, since the user may not have the tab stops prop-
+ erly set. If the terminal has hardware tabs which are
+ initially set every <EM>n</EM> spaces when the terminal is powered
+ up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
+ of spaces the tabs are set to. This is normally used by
+ the <EM>tset</EM> command to determine whether to set the mode for
+ hardware tab expansion, and whether to set the tab stops.
+ If the terminal has tab stops that can be saved in non-
+ volatile memory, the terminfo description can assume that
they are properly set.
- Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
- tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
- program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
- name of a file containing long initialization strings.
- These strings are expected to set the terminal into modes
- consistent with the rest of the terminfo description.
+ Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
+ tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
+ program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
+ name of a file containing long initialization strings.
+ These strings are expected to set the terminal into modes
+ consistent with the rest of the terminfo description.
They are normally sent to the terminal, by the <EM>init</EM> option
- of the <EM>tput</EM> program, each time the user logs in. They
- will be printed in the following order: run the program
- <STRONG>iprog</STRONG>; output <STRONG>is1</STRONG>; <STRONG>is2</STRONG>; set the margins using <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG>
- and <STRONG>smgr</STRONG>; set tabs using <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>; print the file <STRONG>if</STRONG>;
- and finally output <STRONG>is3</STRONG>.
+ of the <EM>tput</EM> program, each time the user logs in. They
+ will be printed in the following order:
+
+ run the program
+ <STRONG>iprog</STRONG>
+
+ output <STRONG>is1</STRONG> <STRONG>is2</STRONG>
+
+ set the margins using
+ <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
+
+ set tabs using
+ <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>
+
+ print the file
+ <STRONG>if</STRONG>
+
+ and finally
+ output <STRONG>is3</STRONG>.
Most initialization is done with <STRONG>is2</STRONG>. Special terminal
modes can be set up without duplicating strings by putting
the common sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
- <STRONG>is3</STRONG>. A pair of sequences that does a harder reset from a
- totally unknown state can be analogously given as <STRONG>rs1</STRONG>,
- <STRONG>rs2</STRONG>, <STRONG>rf</STRONG>, and <STRONG>rs3</STRONG>, analogous to <STRONG>is2</STRONG> and <STRONG>if</STRONG>. These strings
- are output by the <EM>reset</EM> program, which is used when the
- terminal gets into a wedged state. Commands are normally
- placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoy-
- ing effects on the screen and are not necessary when log-
- ging in. For example, the command to set the vt100 into
- 80-column mode would normally be part of <STRONG>is2</STRONG>, but it
- causes an annoying glitch of the screen and is not nor-
- mally needed since the terminal is usually already in 80
- column mode.
+ <STRONG>is3</STRONG>.
+
+ A set of sequences that does a harder reset from a totally
+ unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
+ gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
+ strings are output by the <EM>reset</EM> program, which is used
+ when the terminal gets into a wedged state. Commands are
+ normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
+ duce annoying effects on the screen and are not necessary
+ when logging in. For example, the command to set the
+ vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>,
+ but it causes an annoying glitch of the screen and is not
+ normally needed since the terminal is usually already in
+ 80 column mode.
+
+ The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
+ the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
+ instead of <STRONG>is1</STRONG>, etc. If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
+ capability strings are missing, the <EM>reset</EM> program falls
+ back upon the corresponding initialization capability
+ string.
If there are commands to set and clear tab stops, they can
- be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
- stop in the current column of every row). If a more com-
- plex sequence is needed to set the tabs than can be
- described by this, the sequence can be placed in <STRONG>is2</STRONG> or
+ be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
+ stop in the current column of every row). If a more com-
+ plex sequence is needed to set the tabs than can be
+ described by this, the sequence can be placed in <STRONG>is2</STRONG> or
<STRONG>if</STRONG>.
- <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
- Many older and slower terminals do not support either
+
+</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
+ Many older and slower terminals do not support either
XON/XOFF or DTR handshaking, including hard copy terminals
- and some very archaic CRTs (including, for example, DEC
- VT100s). These may require padding characters after cer-
+ and some very archaic CRTs (including, for example, DEC
+ VT100s). These may require padding characters after cer-
tain cursor motions and screen changes.
If the terminal uses xon/xoff handshaking for flow control
- (that is, it automatically emits ^S back to the host when
+ (that is, it automatically emits ^S back to the host when
its input buffers are close to full), set <STRONG>xon</STRONG>. This capa-
- bility suppresses the emission of padding. You can also
- set it for memory-mapped console devices effectively that
- do not have a speed limit. Padding information should
- still be included so that routines can make better deci-
+ bility suppresses the emission of padding. You can also
+ set it for memory-mapped console devices effectively that
+ do not have a speed limit. Padding information should
+ still be included so that routines can make better deci-
sions about relative costs, but actual pad characters will
not be transmitted.
- If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
- at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
- padding baud rate, then whether padding is emitted or not
+ If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
+ at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
+ padding baud rate, then whether padding is emitted or not
is completely controlled by <STRONG>xon</STRONG>.
- If the terminal requires other than a null (zero) charac-
- ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
+ If the terminal requires other than a null (zero) charac-
+ ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
first character of the <STRONG>pad</STRONG> string is used.
- <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
- Some terminals have an extra `status line' which is not
- normally used by software (and thus not counted in the
+</PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
+ Some terminals have an extra "status line" which is not
+ normally used by software (and thus not counted in the
terminal's <STRONG>lines</STRONG> capability).
- The simplest case is a status line which is cursor-
- addressable but not part of the main scrolling region on
- the screen; the Heathkit H19 has a status line of this
- kind, as would a 24-line VT100 with a 23-line scrolling
- region set up on initialization. This situation is indi-
+ The simplest case is a status line which is cursor-
+ addressable but not part of the main scrolling region on
+ the screen; the Heathkit H19 has a status line of this
+ kind, as would a 24-line VT100 with a 23-line scrolling
+ region set up on initialization. This situation is indi-
cated by the <STRONG>hs</STRONG> capability.
Some terminals with status lines need special sequences to
- access the status line. These may be expressed as a
+ access the status line. These may be expressed as a
string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
- a given zero-origin column on the status line. The
- capability <STRONG>fsl</STRONG> must return to the main-screen cursor posi-
- tions before the last <STRONG>tsl</STRONG>. You may need to embed the
- string values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor)
- in <STRONG>tsl</STRONG> and <STRONG>fsl</STRONG> to accomplish this.
-
- The status line is normally assumed to be the same width
- as the width of the terminal. If this is untrue, you can
+ a given zero-origin column on the status line. The capa-
+ bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
+ before the last <STRONG>tsl</STRONG>. You may need to embed the string
+ values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
+ and <STRONG>fsl</STRONG> to accomplish this.
+
+ The status line is normally assumed to be the same width
+ as the width of the terminal. If this is untrue, you can
specify it with the numeric capability <STRONG>wsl</STRONG>.
- A command to erase or blank the status line may be speci-
+ A command to erase or blank the status line may be speci-
fied as <STRONG>dsl</STRONG>.
- The boolean capability <STRONG>eslok</STRONG> specifies that escape
+ The boolean capability <STRONG>eslok</STRONG> specifies that escape
sequences, tabs, etc., work ordinarily in the status line.
The <STRONG>ncurses</STRONG> implementation does not yet use any of these
become important.
- <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
+</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
Many terminals have alternate character sets useful for
forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
the drawing characters supported by the VT100, with some
characters from the AT&T 4410v1 added. This alternate
character set may be specified by the <STRONG>acsc</STRONG> capability.
-
- <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
- <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
- UK pound sign ACS_STERLING f }
- arrow pointing down ACS_DARROW v .
- arrow pointing left ACS_LARROW < ,
- arrow pointing right ACS_RARROW > +
- arrow pointing up ACS_UARROW ^ -
- board of squares ACS_BOARD # h
- bullet ACS_BULLET o ~
- checker board (stipple) ACS_CKBOARD : a
- degree symbol ACS_DEGREE \ f
- diamond ACS_DIAMOND + `
- greater-than-or-equal-to ACS_GEQUAL > z
- greek pi ACS_PI * {
- horizontal line ACS_HLINE - q
- lantern symbol ACS_LANTERN # i
- large plus or crossover ACS_PLUS + n
- less-than-or-equal-to ACS_LEQUAL < y
- lower left corner ACS_LLCORNER + m
- lower right corner ACS_LRCORNER + j
- not-equal ACS_NEQUAL ! |
- plus/minus ACS_PLMINUS # g
- scan line 1 ACS_S1 ~ o
- scan line 3 ACS_S3 - p
- scan line 7 ACS_S7 - r
- scan line 9 ACS_S9 _ s
- solid square block ACS_BLOCK # 0
- tee pointing down ACS_TTEE + w
- tee pointing left ACS_RTEE + u
- tee pointing right ACS_LTEE + t
- tee pointing up ACS_BTEE + v
- upper left corner ACS_ULCORNER + l
- upper right corner ACS_URCORNER + k
- vertical line ACS_VLINE | x
+ <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
+ <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
+ UK pound sign ACS_STERLING f }
+ arrow pointing down ACS_DARROW v .
+ arrow pointing left ACS_LARROW < ,
+ arrow pointing right ACS_RARROW > +
+ arrow pointing up ACS_UARROW ^ -
+ board of squares ACS_BOARD # h
+ bullet ACS_BULLET o ~
+ checker board (stipple) ACS_CKBOARD : a
+ degree symbol ACS_DEGREE \ f
+ diamond ACS_DIAMOND + `
+ greater-than-or-equal-to ACS_GEQUAL > z
+ greek pi ACS_PI * {
+ horizontal line ACS_HLINE - q
+ lantern symbol ACS_LANTERN # i
+ large plus or crossover ACS_PLUS + n
+ less-than-or-equal-to ACS_LEQUAL < y
+ lower left corner ACS_LLCORNER + m
+ lower right corner ACS_LRCORNER + j
+ not-equal ACS_NEQUAL ! |
+ plus/minus ACS_PLMINUS # g
+ scan line 1 ACS_S1 ~ o
+ scan line 3 ACS_S3 - p
+ scan line 7 ACS_S7 - r
+ scan line 9 ACS_S9 _ s
+ solid square block ACS_BLOCK # 0
+ tee pointing down ACS_TTEE + w
+ tee pointing left ACS_RTEE + u
+ tee pointing right ACS_LTEE + t
+ tee pointing up ACS_BTEE + v
+ upper left corner ACS_ULCORNER + l
+ upper right corner ACS_URCORNER + k
+ vertical line ACS_VLINE | x
The best way to define a new device's graphics set is to
add a column to a copy of this table for your terminal,
ACSC string.
- <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
- Most color terminals are either `Tektronix-like' or `HP-
- like'. Tektronix-like terminals have a predefined set of
+</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
+ Most color terminals are either "Tektronix-like" or "HP-
+ like". Tektronix-like terminals have a predefined set of
N colors (where N usually 8), and can set character-cell
foreground and background characters independently, mixing
them into N * N color-pairs. On HP-like terminals, the
these as it likes, but the RGB values indicate normal
locations in color space.
-
<STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
red <STRONG>COLOR_RED</STRONG> 1 max,0,0
The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
to a different mapping, i.e.,
-
<STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
blue <STRONG>COLOR_BLUE</STRONG> 1 0,0,max
magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
yellow <STRONG>COLOR_YELLOW</STRONG> 6 max,max,0
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
+
It is important to not confuse the two sets of color capa-
bilities; otherwise red/blue will be interchanged on the
display.
ors are enabled. The correspondence with the attributes
understood by <STRONG>curses</STRONG> is as follows:
-
- <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG>
- A_STANDOUT 0 1
- A_UNDERLINE 1 2
- A_REVERSE 2 4
- A_BLINK 3 8
- A_DIM 4 16
- A_BOLD 5 32
- A_INVIS 6 64
- A_PROTECT 7 128
- A_ALTCHARSET 8 256
+ <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
+ A_STANDOUT 0 1 sgr
+ A_UNDERLINE 1 2 sgr
+ A_REVERSE 2 4 sgr
+ A_BLINK 3 8 sgr
+ A_DIM 4 16 sgr
+ A_BOLD 5 32 sgr
+ A_INVIS 6 64 sgr
+ A_PROTECT 7 128 sgr
+ A_ALTCHARSET 8 256 sgr
+ A_HORIZONTAL 9 512 sgr1
+ A_LEFT 10 1024 sgr1
+ A_LOW 11 2048 sgr1
+ A_RIGHT 12 4096 sgr1
+ A_TOP 13 8192 sgr1
+ A_VERTICAL 14 16384 sgr1
+ A_ITALIC 15 32768 sitm
For example, on many IBM PC consoles, the underline
attribute collides with the foreground color blue and is
and optimizes the output in favor of colors.
- <STRONG>Miscellaneous</STRONG>
+</PRE><H3><a name="h3-Miscellaneous">Miscellaneous</a></H3><PRE>
If the terminal requires other than a null (zero) charac-
ter as a pad, then this can be given as pad. Only the
first character of the pad string is used. If the termi-
parameterized string <STRONG>rep</STRONG>. The first parameter is the
character to be repeated and the second is the number of
times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
- the same as `xxxxxxxxxx'.
+ the same as "xxxxxxxxxx".
If the terminal has a settable command character, such as
the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
<EM>virtual</EM> terminal descriptions for which the escape
sequences are known.)
- If the terminal has a ``meta key'' which acts as a shift
+ If the terminal has a "meta key" which acts as a shift
key, setting the 8th bit of any character transmitted,
this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
will assume that the 8th bit is parity and it will usually
- be cleared. If strings exist to turn this ``meta mode''
- on and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
+ be cleared. If strings exist to turn this "meta mode" on
+ and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
If the terminal has more lines of memory than will fit on
the screen at once, the number of lines of memory can be
printer while an <STRONG>mc5p</STRONG> is in effect.
- <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
- Hazeltine terminals, which do not allow `~' characters to
+</PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
+ Hazeltine terminals, which do not allow "~" characters to
be displayed should indicate <STRONG>hz</STRONG>.
Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
- If <STRONG>el</STRONG> is required to get rid of standout (instead of
- merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
+ If <STRONG>el</STRONG> is required to get rid of standout (instead of
+ merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
given.
- Teleray terminals, where tabs turn all characters moved
- over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
- Note: the variable indicating this is now
- `dest_tabs_magic_smso'; in older versions, it was tel-
+ Teleray terminals, where tabs turn all characters moved
+ over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
+ Note: the variable indicating this is now
+ "dest_tabs_magic_smso"; in older versions, it was tel-
eray_glitch. This glitch is also taken to mean that it is
- not possible to position the cursor on top of a ``magic
- cookie'', that to erase standout mode it is instead neces-
+ not possible to position the cursor on top of a "magic
+ cookie", that to erase standout mode it is instead neces-
sary to use delete and insert line. The ncurses implemen-
tation ignores this glitch.
- The Beehive Superbee, which is unable to correctly trans-
- mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
- ing that the f1 key is used for escape and f2 for control
- C. (Only certain Superbees have this problem, depending
- on the ROM.) Note that in older terminfo versions, this
- capability was called `beehive_glitch'; it is now
- `no_esc_ctl_c'.
+ The Beehive Superbee, which is unable to correctly trans-
+ mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
+ ing that the f1 key is used for escape and f2 for control
+ C. (Only certain Superbees have this problem, depending
+ on the ROM.) Note that in older terminfo versions, this
+ capability was called "beehive_glitch"; it is now
+ "no_esc_ctl_c".
- Other specific terminal problems may be corrected by
+ Other specific terminal problems may be corrected by
adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
- <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
+</PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
If there are two very similar terminals, one (the variant)
- can be defined as being just like the other (the base)
- with certain exceptions. In the definition of the vari-
- ant, the string capability <STRONG>use</STRONG> can be given with the name
- of the base terminal. The capabilities given before <STRONG>use</STRONG>
- override those in the base type named by <STRONG>use</STRONG>. If there
- are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
- order. That is, the rightmost <STRONG>use</STRONG> reference is processed
- first, then the one to its left, and so forth. Capabili-
- ties given explicitly in the entry override those brought
+ can be defined as being just like the other (the base)
+ with certain exceptions. In the definition of the vari-
+ ant, the string capability <STRONG>use</STRONG> can be given with the name
+ of the base terminal. The capabilities given before <STRONG>use</STRONG>
+ override those in the base type named by <STRONG>use</STRONG>. If there
+ are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
+ order. That is, the rightmost <STRONG>use</STRONG> reference is processed
+ first, then the one to its left, and so forth. Capabili-
+ ties given explicitly in the entry override those brought
in by <STRONG>use</STRONG> references.
A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
- the use reference that imports it, where <EM>xx</EM> is the capa-
+ the use reference that imports it, where <EM>xx</EM> is the capa-
bility. For example, the entry
- 2621-nl, smkx@, rmkx@, use=2621,
+ 2621-nl, smkx@, rmkx@, use=2621,
- defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
- capabilities, and hence does not turn on the function key
- labels when in visual mode. This is useful for different
+ defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
+ capabilities, and hence does not turn on the function key
+ labels when in visual mode. This is useful for different
modes for a terminal, or for different user preferences.
- <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
- Long terminfo entries are unlikely to be a problem; to
- date, no entry has even approached terminfo's 4096-byte
+</PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
+ Long terminfo entries are unlikely to be a problem; to
+ date, no entry has even approached terminfo's 4096-byte
string-table maximum. Unfortunately, the termcap transla-
tions are much more strictly limited (to 1023 bytes), thus
- termcap translations of long terminfo entries can cause
+ termcap translations of long terminfo entries can cause
problems.
- The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
- instruct the user to allocate a 1024-byte buffer for the
- termcap entry. The entry gets null-terminated by the
+ The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
+ instruct the user to allocate a 1024-byte buffer for the
+ termcap entry. The entry gets null-terminated by the
termcap library, so that makes the maximum safe length for
- a termcap entry 1k-1 (1023) bytes. Depending on what the
- application and the termcap library being used does, and
+ a termcap entry 1k-1 (1023) bytes. Depending on what the
+ application and the termcap library being used does, and
where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
is searching for is, several bad things can happen.
- Some termcap libraries print a warning message or exit if
- they find an entry that's longer than 1023 bytes; others
- do not; others truncate the entries to 1023 bytes. Some
+ Some termcap libraries print a warning message or exit if
+ they find an entry that's longer than 1023 bytes; others
+ do not; others truncate the entries to 1023 bytes. Some
application programs allocate more than the recommended 1K
for the termcap entry; others do not.
Each termcap entry has two important sizes associated with
it: before "tc" expansion, and after "tc" expansion. "tc"
- is the capability that tacks on another termcap entry to
- the end of the current one, to add on its capabilities.
- If a termcap entry does not use the "tc" capability, then
+ is the capability that tacks on another termcap entry to
+ the end of the current one, to add on its capabilities.
+ If a termcap entry does not use the "tc" capability, then
of course the two lengths are the same.
- The "before tc expansion" length is the most important
- one, because it affects more than just users of that par-
- ticular terminal. This is the length of the entry as it
+ The "before tc expansion" length is the most important
+ one, because it affects more than just users of that par-
+ ticular terminal. This is the length of the entry as it
exists in /etc/termcap, minus the backslash-newline pairs,
which <STRONG>tgetent()</STRONG> strips out while reading it. Some termcap
- libraries strip off the final newline, too (GNU termcap
+ libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
- * a termcap entry before expansion is more than 1023
- bytes long,
-
- * and the application has only allocated a 1k buffer,
-
- * and the termcap library (like the one in BSD/OS 1.1
- and GNU) reads the whole entry into the buffer, no
- matter what its length, to see if it's the entry it
- wants,
-
- * and <STRONG>tgetent()</STRONG> is searching for a terminal type that
- either is the long entry, appears in the termcap file
- after the long entry, or does not appear in the file
- at all (so that <STRONG>tgetent()</STRONG> has to search the whole
- termcap file).
-
- Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
- and probably core dump the program. Programs like telnet
- are particularly vulnerable; modern telnets pass along
- values like the terminal type automatically. The results
- are almost as undesirable with a termcap library, like
- SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
- when it reads an overly long termcap entry. If a termcap
- library truncates long entries, like OSF/1 3.0, it is
- immune to dying here but will return incorrect data for
+ <STRONG>o</STRONG> a termcap entry before expansion is more than 1023
+ bytes long,
+
+ <STRONG>o</STRONG> and the application has only allocated a 1k buffer,
+
+ <STRONG>o</STRONG> and the termcap library (like the one in BSD/OS 1.1
+ and GNU) reads the whole entry into the buffer, no
+ matter what its length, to see if it is the entry it
+ wants,
+
+ <STRONG>o</STRONG> and <STRONG>tgetent()</STRONG> is searching for a terminal type that
+ either is the long entry, appears in the termcap file
+ after the long entry, or does not appear in the file
+ at all (so that <STRONG>tgetent()</STRONG> has to search the whole
+ termcap file).
+
+ Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
+ and probably core dump the program. Programs like telnet
+ are particularly vulnerable; modern telnets pass along
+ values like the terminal type automatically. The results
+ are almost as undesirable with a termcap library, like
+ SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
+ when it reads an overly long termcap entry. If a termcap
+ library truncates long entries, like OSF/1 3.0, it is
+ immune to dying here but will return incorrect data for
the terminal.
The "after tc expansion" length will have a similar effect
to the above, but only for people who actually set TERM to
- that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
- sion once it's found the terminal type it was looking for,
- not while searching.
+ that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
+ sion once it is found the terminal type it was looking
+ for, not while searching.
In summary, a termcap entry that is longer than 1023 bytes
- can cause, on various combinations of termcap libraries
- and applications, a core dump, warnings, or incorrect
- operation. If it's too long even before "tc" expansion,
+ can cause, on various combinations of termcap libraries
+ and applications, a core dump, warnings, or incorrect
+ operation. If it is too long even before "tc" expansion,
it will have this effect even for users of some other ter-
- minal types and users whose TERM variable does not have a
+ minal types and users whose TERM variable does not have a
termcap entry.
When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
- mentation of <STRONG><A HREF="tic.1.html">tic(1)</A></STRONG> issues warning messages when the pre-
- tc length of a termcap translation is too long. The -c
- (check) option also checks resolved (after tc expansion)
+ mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
+ tc length of a termcap translation is too long. The -c
+ (check) option also checks resolved (after tc expansion)
lengths.
- <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
- It is not wise to count on portability of binary terminfo
- entries between commercial UNIX versions. The problem is
- that there are at least two versions of terminfo (under
+
+</PRE><H3><a name="h3-Binary-Compatibility">Binary Compatibility</a></H3><PRE>
+ It is not wise to count on portability of binary terminfo
+ entries between commercial UNIX versions. The problem is
+ that there are at least two versions of terminfo (under
HP-UX and AIX) which diverged from System V terminfo after
- SVr1, and have added extension capabilities to the string
- table that (in the binary format) collide with System V
+ SVr1, and have added extension capabilities to the string
+ table that (in the binary format) collide with System V
and XSI Curses extensions.
-</PRE>
-<H2>EXTENSIONS</H2><PRE>
+</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
+ Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
+ TERMINFO_DIRS is not supported by older implementations.
+
Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
SVr4, do not interpret the %A and %O operators in parame-
ter strings.
and emulators like xterm that can return mouse-tracking
information in the keyboard-input stream.
+ X/Open Curses does not mention italics. Portable applica-
+ tions must assume that numeric capabilities are signed
+ 16-bit values. This includes the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv)
+ capability. The 32768 mask value used for italics with
+ ncv can be confused with an absent or cancelled ncv. If
+ italics should work with colors, then the ncv value must
+ be specified, even if it is zero.
+
Different commercial ports of terminfo and curses support
different subsets of the XSI Curses standard and (in some
cases) different extension sets. Here is a summary, accu-
through 63, plus a number of incompatible string table
extensions.
- <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
+ <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
-</PRE>
-<H2>FILES</H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/usr/share/terminfo/?/* files containing terminal
descriptions
-</PRE>
-<H2>SEE ALSO</H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+ <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
-</PRE>
-<H2>AUTHORS</H2><PRE>
+</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
- <STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG>
+ <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
</PRE>
-<HR>
-<ADDRESS>
-Man(1) output converted with
-<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
-</ADDRESS>
+<div class="nav">
+<ul>
+<li><a href="#h2-NAME">NAME</a></li>
+<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-Predefined-Capabilities">Predefined Capabilities</a></li>
+<li><a href="#h3-User-Defined-Capabilities">User-Defined Capabilities</a></li>
+<li><a href="#h3-A-Sample-Entry">A Sample Entry</a></li>
+<li><a href="#h3-Types-of-Capabilities">Types of Capabilities</a></li>
+<li><a href="#h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></li>
+<li><a href="#h3-Preparing-Descriptions">Preparing Descriptions</a></li>
+<li><a href="#h3-Basic-Capabilities">Basic Capabilities</a></li>
+<li><a href="#h3-Parameterized-Strings">Parameterized Strings</a></li>
+<li><a href="#h3-Cursor-Motions">Cursor Motions</a></li>
+<li><a href="#h3-Area-Clears">Area Clears</a></li>
+<li><a href="#h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></li>
+<li><a href="#h3-Insert_Delete-Character">Insert/Delete Character</a></li>
+<li><a href="#h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></li>
+<li><a href="#h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></li>
+<li><a href="#h3-Tabs-and-Initialization">Tabs and Initialization</a></li>
+<li><a href="#h3-Delays-and-Padding">Delays and Padding</a></li>
+<li><a href="#h3-Status-Lines">Status Lines</a></li>
+<li><a href="#h3-Line-Graphics">Line Graphics</a></li>
+<li><a href="#h3-Color-Handling">Color Handling</a></li>
+<li><a href="#h3-Miscellaneous">Miscellaneous</a></li>
+<li><a href="#h3-Glitches-and-Braindamage">Glitches and Braindamage</a></li>
+<li><a href="#h3-Similar-Terminals">Similar Terminals</a></li>
+<li><a href="#h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></li>
+<li><a href="#h3-Binary-Compatibility">Binary Compatibility</a></li>
+</ul>
+</li>
+<li><a href="#h2-EXTENSIONS">EXTENSIONS</a></li>
+<li><a href="#h2-FILES">FILES</a></li>
+<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
+<li><a href="#h2-AUTHORS">AUTHORS</a></li>
+</ul>
+</div>
</BODY>
</HTML>
projects / ncurses.git / blobdiff