* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2013,2016 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.21 2013/03/09 22:11:36 tom Exp @
+ * @Id: terminfo.head,v 1.22 2016/10/15 17:02:31 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.69 2015/04/26 14:47:23 tom Exp @
+ * @Id: terminfo.tail,v 1.76 2017/01/07 18:32:49 tom Exp @
* Beginning of terminfo.tail file
* This file is part of ncurses.
* See "terminfo.head" for copyright.
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
fying padding requirements and initialization sequences.
- This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20160820).
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20170204).
Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
A delay in milliseconds may appear anywhere in a string
capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
- and padding characters are supplied by <EM>tputs</EM> to provide
- this delay. The delay must be a number with at most one
- decimal place of precision; it may be followed by suffixes
- "*" or "/" or both. A "*" indicates that the padding
- required is proportional to the number of lines affected
- by the operation, and the amount given is the per-
- affected-unit padding required. (In the case of insert
- character, the factor is still the number of <EM>lines</EM>
- affected.) Normally, padding is advisory if the device
- has the <STRONG>xon</STRONG> capability; it is used for cost computation
- but does not trigger delays. A "/" suffix indicates that
- the padding is mandatory and forces a delay of the given
- number of milliseconds even on devices for which <STRONG>xon</STRONG> is
- present to indicate flow control.
-
- Sometimes individual capabilities must be commented out.
- To do this, put a period before the capability name. For
+ and padding characters are supplied by <STRONG><A HREF="curs_terminfo.3x.html">tputs(3x)</A></STRONG> to pro-
+ vide this delay.
+
+ <STRONG>o</STRONG> The delay must be a number with at most one decimal
+ place of precision; it may be followed by suffixes "*"
+ or "/" or both.
+
+ <STRONG>o</STRONG> A "*" indicates that the padding required is propor-
+ tional to the number of lines affected by the opera-
+ tion, and the amount given is the per-affected-unit
+ padding required. (In the case of insert character,
+ the factor is still the number of <EM>lines</EM> affected.)
+
+ Normally, padding is advisory if the device has the
+ <STRONG>xon</STRONG> capability; it is used for cost computation but
+ does not trigger delays.
+
+ <STRONG>o</STRONG> A "/" suffix indicates that the padding is mandatory
+ and forces a delay of the given number of milliseconds
+ even on devices for which <STRONG>xon</STRONG> is present to indicate
+ flow control.
+
+ Sometimes individual capabilities must be commented out.
+ To do this, put a period before the capability name. For
example, see the second <STRONG>ind</STRONG> in the example above.
</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
- The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
+ The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
several places. It uses only the first description found.
- The library has a compiled-in list of places to search
- which can be overridden by environment variables. Before
- starting to search, <STRONG>ncurses</STRONG> eliminates duplicates in its
+ The library has a compiled-in list of places to search
+ which can be overridden by environment variables. Before
+ starting to search, <STRONG>ncurses</STRONG> eliminates duplicates in its
search list.
- <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is
- interpreted as the pathname of a directory containing
- the compiled description you are working on. Only
+ <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is
+ interpreted as the pathname of a directory containing
+ the compiled description you are working on. Only
that directory is searched.
- <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in
- the directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
+ <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in
+ the directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
tion.
- <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is
+ <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is
set, <STRONG>ncurses</STRONG> will interpret the contents of that vari-
- able as a list of colon-separated directories (or
+ able as a list of colon-separated directories (or
database files) to be searched.
- An empty directory name (i.e., if the variable begins
- or ends with a colon, or contains adjacent colons) is
- interpreted as the system location <EM>/usr/share/ter-</EM>
+ An empty directory name (i.e., if the variable begins
+ or ends with a colon, or contains adjacent colons) is
+ interpreted as the system location <EM>/usr/share/ter-</EM>
<EM>minfo</EM>.
<STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
- <STRONG>o</STRONG> a list of directories
+ <STRONG>o</STRONG> a list of directories
(/usr/local/ncurses/share/terminfo:/usr/share/ter-
minfo), and
</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
- We now outline how to prepare descriptions of terminals.
- The most effective way to prepare a terminal description
- is by imitating the description of a similar terminal in
- <EM>terminfo</EM> and to build up a description gradually, using
+ We now outline how to prepare descriptions of terminals.
+ The most effective way to prepare a terminal description
+ is by imitating the description of a similar terminal in
+ <EM>terminfo</EM> and to build up a description gradually, using
partial descriptions with <EM>vi</EM> or some other screen-oriented
- program to check that they are correct. Be aware that a
+ program to check that they are correct. Be aware that a
very unusual terminal may expose deficiencies in the abil-
- ity of the <EM>terminfo</EM> file to describe it or bugs in the
+ ity of the <EM>terminfo</EM> file to describe it or bugs in the
screen-handling code of the test program.
- To get the padding for insert line right (if the terminal
+ To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
- a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the "u" key several times
- quickly. If the terminal messes up, more padding is usu-
- ally needed. A similar test can be used for insert char-
+ a large file at 9600 baud, delete 16 or so lines from the
+ middle of the screen, then hit the "u" key several times
+ quickly. If the terminal messes up, more padding is usu-
+ ally needed. A similar test can be used for insert char-
acter.
</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
- The number of columns on each line for the terminal is
- given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
- a CRT, then the number of lines on the screen is given by
+ The number of columns on each line for the terminal is
+ given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
+ a CRT, then the number of lines on the screen is given by
the <STRONG>lines</STRONG> capability. If the terminal wraps around to the
- beginning of the next line when it reaches the right mar-
+ beginning of the next line when it reaches the right mar-
gin, then it should have the <STRONG>am</STRONG> capability. If the termi-
- nal can clear its screen, leaving the cursor in the home
- position, then this is given by the <STRONG>clear</STRONG> string capabil-
- ity. If the terminal overstrikes (rather than clearing a
- position when a character is struck over) then it should
- have the <STRONG>os</STRONG> capability. If the terminal is a printing
- terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
- (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
- 4010 series, as well as hard copy and APL terminals.) If
+ nal can clear its screen, leaving the cursor in the home
+ position, then this is given by the <STRONG>clear</STRONG> string capabil-
+ ity. If the terminal overstrikes (rather than clearing a
+ position when a character is struck over) then it should
+ have the <STRONG>os</STRONG> capability. If the terminal is a printing
+ terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
+ (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
+ 4010 series, as well as hard copy and APL terminals.) If
there is a code to move the cursor to the left edge of the
current row, give this as <STRONG>cr</STRONG>. (Normally this will be car-
- riage return, control M.) If there is a code to produce
+ riage return, control M.) If there is a code to produce
an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
- If there is a code to move the cursor one position to the
- left (such as backspace) that capability should be given
- as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
+ If there is a code to move the cursor one position to the
+ left (such as backspace) that capability should be given
+ as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
- cursor motions should not alter the text they pass over,
- for example, you would not normally use "<STRONG>cuf1</STRONG>= " because
+ cursor motions should not alter the text they pass over,
+ for example, you would not normally use "<STRONG>cuf1</STRONG>= " because
the space would erase the character moved over.
- A very important point here is that the local cursor
- motions encoded in <EM>terminfo</EM> are undefined at the left and
- top edges of a CRT terminal. Programs should never
- attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
+ A very important point here is that the local cursor
+ motions encoded in <EM>terminfo</EM> are undefined at the left and
+ top edges of a CRT terminal. Programs should never
+ attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
given, and never attempt to go up locally off the top. In
- order to scroll text up, a program will go to the bottom
+ order to scroll text up, a program will go to the bottom
left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
To scroll text down, a program goes to the top left corner
- of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
- The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
+ of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
+ The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
respective corners of the screen.
Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG>
and <STRONG>rin</STRONG> which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except
- that they take one parameter, and scroll that many lines.
- They are also undefined except at the appropriate edge of
+ that they take one parameter, and scroll that many lines.
+ They are also undefined except at the appropriate edge of
the screen.
- The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
- right edge of the screen when text is output, but this
+ The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
+ right edge of the screen when text is output, but this
does not necessarily apply to a <STRONG>cuf1</STRONG> from the last column.
- The only local motion which is defined from the left edge
- is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
- move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
- given, the effect is undefined. This is useful for draw-
- ing a box around the edge of the screen, for example. If
- the terminal has switch selectable automatic margins, the
- <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
- If the terminal has a command which moves to the first
- column of the next line, that command can be given as <STRONG>nel</STRONG>
- (newline). It does not matter if the command clears the
- remainder of the current line, so if the terminal has no
- <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
+ The only local motion which is defined from the left edge
+ is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
+ move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
+ given, the effect is undefined. This is useful for draw-
+ ing a box around the edge of the screen, for example. If
+ the terminal has switch selectable automatic margins, the
+ <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
+ If the terminal has a command which moves to the first
+ column of the next line, that command can be given as <STRONG>nel</STRONG>
+ (newline). It does not matter if the command clears the
+ remainder of the current line, so if the terminal has no
+ <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
out of one or both of them.
These capabilities suffice to describe hard-copy and
- "glass-tty" terminals. Thus the model 33 teletype is
+ "glass-tty" terminals. Thus the model 33 teletype is
described as
33|tty33|tty|model 33 teletype,
</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
- Cursor addressing and other strings requiring parameters
- in the terminal are described by a parameterized string
- capability, with <EM>printf</EM>-like escapes such as <EM>%x</EM> in it.
- For example, to address the cursor, the <STRONG>cup</STRONG> capability is
+ Cursor addressing and other strings requiring parameters
+ in the terminal are described by a parameterized string
+ capability, with <EM>printf</EM>-like escapes such as <EM>%x</EM> in it.
+ For example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
- memory.) If the terminal has memory relative cursor
+ memory.) If the terminal has memory relative cursor
addressing, that can be indicated by <STRONG>mrcup</STRONG>.
- The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
- to manipulate it. Typically a sequence will push one of
- the parameters onto the stack and then print it in some
- format. Print (e.g., "%d") is a special case. Other
- operations, including "%t" pop their operand from the
+ The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
+ to manipulate it. Typically a sequence will push one of
+ the parameters onto the stack and then print it in some
+ format. Print (e.g., "%d") is a special case. Other
+ operations, including "%t" pop their operand from the
stack. It is noted that more complex operations are often
necessary, e.g., in the <STRONG>sgr</STRONG> string.
<STRONG>%%</STRONG> outputs "%"
<STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":"
- to allow the next character to be a "-" flag, avoid-
+ as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":"
+ to allow the next character to be a "-" flag, avoid-
ing interpreting "%-" as an operator.
- %c print pop() like %c in <STRONG>printf</STRONG>
+ %c print <EM>pop()</EM> like %c in <STRONG>printf</STRONG>
- <STRONG>%s</STRONG> print pop() like %s in <STRONG>printf</STRONG>
+ <STRONG>%s</STRONG> print <EM>pop()</EM> like %s in <STRONG>printf</STRONG>
<STRONG>%p</STRONG><EM>[1-9]</EM>
push <EM>i</EM>'th parameter
<STRONG>%P</STRONG><EM>[a-z]</EM>
- set dynamic variable <EM>[a-z]</EM> to pop()
+ set dynamic variable <EM>[a-z]</EM> to <EM>pop()</EM>
<STRONG>%g</STRONG><EM>[a-z]/</EM>
get dynamic variable <EM>[a-z]</EM> and push it
<STRONG>%g</STRONG><EM>[A-Z]</EM>
get static variable <EM>[a-z]</EM> and push it
- The terms "static" and "dynamic" are misleading.
- Historically, these are simply two different sets of
- variables, whose values are not reset between calls
- to <STRONG>tparm</STRONG>. However, that fact is not documented in
- other implementations. Relying on it will adversely
- impact portability to other implementations.
+ The terms "static" and "dynamic" are misleading.
+ Historically, these are simply two different sets of
+ variables, whose values are not reset between calls
+ to <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG>. However, that fact is not documented
+ in other implementations. Relying on it will
+ adversely impact portability to other implementa-
+ tions.
<STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
<STRONG>%l</STRONG> push strlen(pop)
<STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
- arithmetic (%m is mod): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+ arithmetic (%m is <EM>mod</EM>): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
<STRONG>%&</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM>
<STRONG>%!</STRONG>, <STRONG>%~</STRONG>
unary operations (logical and bit complement):
- push(op pop())
+ <EM>push(op</EM> <EM>pop())</EM>
<STRONG>%i</STRONG> add 1 to first two parameters (for ANSI terminals)
late destructive scrolling; their documentation cautions
you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
implementation is more liberal and will do explicit erases
- after scrolling if <STRONG>ndstr</STRONG> is defined.
+ after scrolling if <STRONG>ndsrc</STRONG> is defined.
If the terminal has the ability to define a window as part
of memory, which all commands affect, it should be given
initially set every <EM>n</EM> spaces when the terminal is powered
up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
of spaces the tabs are set to. This is normally used by
- the <EM>tset</EM> command to determine whether to set the mode for
+ the <STRONG>tset</STRONG> command to determine whether to set the mode for
hardware tab expansion, and whether to set the tab stops.
If the terminal has tab stops that can be saved in non-
volatile memory, the terminfo description can assume that
These strings are expected to set the terminal into modes
consistent with the rest of the terminfo description.
They are normally sent to the terminal, by the <EM>init</EM> option
- of the <EM>tput</EM> program, each time the user logs in. They
+ of the <STRONG>tput</STRONG> program, each time the user logs in. They
will be printed in the following order:
run the program
A set of sequences that does a harder reset from a totally
unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
- strings are output by the <EM>reset</EM> program, which is used
+ strings are output by the <STRONG>reset</STRONG> program, which is used
when the terminal gets into a wedged state. Commands are
normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
duce annoying effects on the screen and are not necessary
normally needed since the terminal is usually already in
80 column mode.
- The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
+ The <STRONG>reset</STRONG> program writes strings including <STRONG>iprog</STRONG>, etc., in
the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
instead of <STRONG>is1</STRONG>, etc. If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
- capability strings are missing, the <EM>reset</EM> program falls
+ capability strings are missing, the <STRONG>reset</STRONG> program falls
back upon the corresponding initialization capability
string.
</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
- Most color terminals are either "Tektronix-like" or "HP-
- like". Tektronix-like terminals have a predefined set of
- N colors (where N usually 8), and can set character-cell
- foreground and background characters independently, mixing
- them into N * N color-pairs. On HP-like terminals, the
- use must set each color pair up separately (foreground and
- background are not independently settable). Up to M
- color-pairs may be set up from 2*M different colors.
- ANSI-compatible terminals are Tektronix-like.
+ The curses library functions <STRONG>init_pair</STRONG> and <STRONG>init_color</STRONG>
+ manipulate the <EM>color</EM> <EM>pairs</EM> and <EM>color</EM> <EM>values</EM> discussed in
+ this section (see <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> for details on these and
+ related functions).
+
+ Most color terminals are either "Tektronix-like" or "HP-
+ like":
+
+ <STRONG>o</STRONG> Tektronix-like terminals have a predefined set of <EM>N</EM>
+ colors (where <EM>N</EM> is usually 8), and can set character-
+ cell foreground and background characters indepen-
+ dently, mixing them into <EM>N</EM> * <EM>N</EM> color-pairs.
+
+ <STRONG>o</STRONG> On HP-like terminals, the user must set each color
+ pair up separately (foreground and background are not
+ independently settable). Up to <EM>M</EM> color-pairs may be
+ set up from 2*<EM>M</EM> different colors. ANSI-compatible
+ terminals are Tektronix-like.
Some basic color capabilities are independent of the color
method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
- the maximum numbers of colors and color-pairs that can be
- displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
- resets foreground and background colors to their default
- values for the terminal. The <STRONG>oc</STRONG> string resets all colors
- or color-pairs to their default values for the terminal.
- Some terminals (including many PC terminal emulators)
- erase screen areas with the current background color
- rather than the power-up default background; these should
+ the maximum numbers of colors and color-pairs that can be
+ displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
+ resets foreground and background colors to their default
+ values for the terminal. The <STRONG>oc</STRONG> string resets all colors
+ or color-pairs to their default values for the terminal.
+ Some terminals (including many PC terminal emulators)
+ erase screen areas with the current background color
+ rather than the power-up default background; these should
have the boolean capability <STRONG>bce</STRONG>.
- To change the current foreground or background color on a
- Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
- and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
- and <STRONG>setb</STRONG> (set background). These take one parameter, the
- color number. The SVr4 documentation describes only
- <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
- supports ANSI escape sequences to set background and fore-
- ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
- tively. If the terminal supports other escape sequences
- to set background and foreground, they should be coded as
- <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
- the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
- defined."
+ While the curses library works with <EM>color</EM> <EM>pairs</EM> (reflect-
+ ing the inability of some devices to set foreground and
+ background colors independently), there are separate capa-
+ bilities for setting these features:
+
+ <STRONG>o</STRONG> To change the current foreground or background color
+ on a Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI
+ foreground) and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG>
+ (set foreground) and <STRONG>setb</STRONG> (set background). These
+ take one parameter, the color number. The SVr4 docu-
+ mentation describes only <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft
+ says that "If the terminal supports ANSI escape
+ sequences to set background and foreground, they
+ should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respectively.
+
+ <STRONG>o</STRONG> If the terminal supports other escape sequences to set
+ background and foreground, they should be coded as
+ <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <STRONG>vidputs</STRONG> and the
+ <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG> functions use the <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> capabil-
+ ities if they are defined.
The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
numeric argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>
blue <STRONG>COLOR_BLUE</STRONG> 4 0,0,max
magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
+
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
parameter to set which color pair is current.
- On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
- present to indicate that colors can be modified. If so,
- the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
- - 1)and three more parameters which describe the color.
- These three parameters default to being interpreted as RGB
- (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
- is present, they are instead as HLS (Hue, Lightness, Satu-
- ration) indices. The ranges are terminal-dependent.
-
- On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
- changing a color-pair value. It will take seven parame-
- ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
- triples describing first background and then foreground
- colors. These parameters must be (Red, Green, Blue) or
- (Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
+ Some terminals allow the <EM>color</EM> <EM>values</EM> to be modified:
+
+ <STRONG>o</STRONG> On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may
+ be present to indicate that colors can be modified.
+ If so, the <STRONG>initc</STRONG> capability will take a color number
+ (0 to <STRONG>colors</STRONG> - 1)and three more parameters which
+ describe the color. These three parameters default to
+ being interpreted as RGB (Red, Green, Blue) values.
+ If the boolean capability <STRONG>hls</STRONG> is present, they are
+ instead as HLS (Hue, Lightness, Saturation) indices.
+ The ranges are terminal-dependent.
+
+ <STRONG>o</STRONG> On an HP-like terminal, <STRONG>initp</STRONG> may give a capability
+ for changing a color-pair value. It will take seven
+ parameters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1),
+ and two triples describing first background and then
+ foreground colors. These parameters must be (Red,
+ Green, Blue) or (Hue, Lightness, Saturation) depending
+ on <STRONG>hls</STRONG>.
On some color terminals, colors collide with highlights.
You can register these collisions with the <STRONG>ncv</STRONG> capability.
termcap translations of long terminfo entries can cause
problems.
- The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
+ The man pages for 4.3BSD and older versions of <STRONG>tgetent</STRONG>
instruct the user to allocate a 1024-byte buffer for the
termcap entry. The entry gets null-terminated by the
termcap library, so that makes the maximum safe length for
a termcap entry 1k-1 (1023) bytes. Depending on what the
application and the termcap library being used does, and
- where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
+ where in the termcap file the terminal type that <STRONG>tgetent</STRONG>
is searching for is, several bad things can happen.
Some termcap libraries print a warning message or exit if
one, because it affects more than just users of that par-
ticular terminal. This is the length of the entry as it
exists in /etc/termcap, minus the backslash-newline pairs,
- which <STRONG>tgetent()</STRONG> strips out while reading it. Some termcap
+ which <STRONG>tgetent</STRONG> strips out while reading it. Some termcap
libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
matter what its length, to see if it is the entry it
wants,
- <STRONG>o</STRONG> and <STRONG>tgetent()</STRONG> is searching for a terminal type that
+ <STRONG>o</STRONG> and <STRONG>tgetent</STRONG> is searching for a terminal type that
either is the long entry, appears in the termcap file
after the long entry, or does not appear in the file
- at all (so that <STRONG>tgetent()</STRONG> has to search the whole
- termcap file).
-
- Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
- and probably core dump the program. Programs like telnet
- are particularly vulnerable; modern telnets pass along
- values like the terminal type automatically. The results
- are almost as undesirable with a termcap library, like
- SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
- when it reads an overly long termcap entry. If a termcap
- library truncates long entries, like OSF/1 3.0, it is
- immune to dying here but will return incorrect data for
- the terminal.
+ at all (so that <STRONG>tgetent</STRONG> has to search the whole term-
+ cap file).
+
+ Then <STRONG>tgetent</STRONG> will overwrite memory, perhaps its stack, and
+ probably core dump the program. Programs like telnet are
+ particularly vulnerable; modern telnets pass along values
+ like the terminal type automatically. The results are
+ almost as undesirable with a termcap library, like SunOS
+ 4.1.3 and Ultrix 4.4, that prints warning messages when it
+ reads an overly long termcap entry. If a termcap library
+ truncates long entries, like OSF/1 3.0, it is immune to
+ dying here but will return incorrect data for the termi-
+ nal.
The "after tc expansion" length will have a similar effect
to the above, but only for people who actually set TERM to
- that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
- sion once it is found the terminal type it was looking
- for, not while searching.
+ that terminal type, since <STRONG>tgetent</STRONG> only does "tc" expansion
+ once it is found the terminal type it was looking for, not
+ while searching.
In summary, a termcap entry that is longer than 1023 bytes
can cause, on various combinations of termcap libraries
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
- <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>,
+ <STRONG>
printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>. <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
projects / ncurses.git / blobdiff