<!--
****************************************************************************
- * Copyright 2018-2021,2022 Thomas E. Dickey *
+ * Copyright 2018-2022,2023 Thomas E. Dickey *
* Copyright 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: tset.1,v 1.62 2022/02/12 20:02:20 tom Exp @
+ * @Id: tset.1,v 1.63 2023/06/10 15:46:24 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
and systems using that convention, <STRONG>getty(1)</STRONG> does this job by setting
<STRONG>TERM</STRONG> according to the type passed to it by <EM>/etc/inittab</EM>.)
- 4. The default terminal type, "unknown".
+ 4. The default terminal type, "unknown", is not suitable for curses
+ applications.
- If the terminal type was not specified on the command-line, the <STRONG>-m</STRONG>
+ If the terminal type was not specified on the command-line, the <STRONG>-m</STRONG>
option mappings are then applied (see the section <STRONG>TERMINAL</STRONG> <STRONG>TYPE</STRONG> <STRONG>MAPPING</STRONG>
- for more information). Then, if the terminal type begins with a
- question mark ("?"), the user is prompted for confirmation of the
- terminal type. An empty response confirms the type, or, another type
- can be entered to specify a new type. Once the terminal type has been
+ for more information). Then, if the terminal type begins with a
+ question mark ("?"), the user is prompted for confirmation of the
+ terminal type. An empty response confirms the type, or, another type
+ can be entered to specify a new type. Once the terminal type has been
determined, the terminal description for the terminal is retrieved. If
no terminal description is found for the type, the user is prompted for
another terminal type.
Once the terminal description is retrieved,
- <STRONG>o</STRONG> if the "<STRONG>-w</STRONG>" option is enabled, <STRONG>tset</STRONG> may update the terminal's
+ <STRONG>o</STRONG> if the "<STRONG>-w</STRONG>" option is enabled, <STRONG>tset</STRONG> may update the terminal's
window size.
- If the window size cannot be obtained from the operating system,
- but the terminal description (or environment, e.g., <STRONG>LINES</STRONG> and
- <STRONG>COLUMNS</STRONG> variables specify this), use this to set the operating
+ If the window size cannot be obtained from the operating system,
+ but the terminal description (or environment, e.g., <STRONG>LINES</STRONG> and
+ <STRONG>COLUMNS</STRONG> variables specify this), use this to set the operating
system's notion of the window size.
- <STRONG>o</STRONG> if the "<STRONG>-c</STRONG>" option is enabled, the backspace, interrupt and line
+ <STRONG>o</STRONG> if the "<STRONG>-c</STRONG>" option is enabled, the backspace, interrupt and line
kill characters (among many other things) are set
- <STRONG>o</STRONG> unless the "<STRONG>-I</STRONG>" option is enabled, the terminal and tab
- <EM>initialization</EM> strings are sent to the standard error output, and
+ <STRONG>o</STRONG> unless the "<STRONG>-I</STRONG>" option is enabled, the terminal and tab
+ <EM>initialization</EM> strings are sent to the standard error output, and
<STRONG>tset</STRONG> waits one second (in case a hardware reset was issued).
- <STRONG>o</STRONG> Finally, if the erase, interrupt and line kill characters have
- changed, or are not set to their default values, their values are
+ <STRONG>o</STRONG> Finally, if the erase, interrupt and line kill characters have
+ changed, or are not set to their default values, their values are
displayed to the standard error output.
<STRONG>o</STRONG> resets any unset special characters to their default values
before doing the terminal initialization described above. Also, rather
- than using the terminal <EM>initialization</EM> strings, it uses the terminal
+ than using the terminal <EM>initialization</EM> strings, it uses the terminal
<EM>reset</EM> strings.
- The <STRONG>reset</STRONG> command is useful after a program dies leaving a terminal in
+ The <STRONG>reset</STRONG> command is useful after a program dies leaving a terminal in
an abnormal state:
<STRONG>o</STRONG> you may have to type
<EM><LF></EM><STRONG>reset</STRONG><EM><LF></EM>
(the line-feed character is normally control-J) to get the terminal
- to work, as carriage-return may no longer work in the abnormal
+ to work, as carriage-return may no longer work in the abnormal
state.
<STRONG>o</STRONG> Also, the terminal will often not echo the command.
<STRONG>-e</STRONG> <EM>ch</EM>
Set the erase character to <EM>ch</EM>.
- <STRONG>-I</STRONG> Do not send the terminal or tab initialization strings to the
+ <STRONG>-I</STRONG> Do not send the terminal or tab initialization strings to the
terminal.
<STRONG>-i</STRONG> <EM>ch</EM>
Specify a mapping from a port type to a terminal. See the section
<STRONG>TERMINAL</STRONG> <STRONG>TYPE</STRONG> <STRONG>MAPPING</STRONG> for more information.
- <STRONG>-Q</STRONG> Do not display any values for the erase, interrupt and line kill
- characters. Normally <STRONG>tset</STRONG> displays the values for control
+ <STRONG>-Q</STRONG> Do not display any values for the erase, interrupt and line kill
+ characters. Normally <STRONG>tset</STRONG> displays the values for control
characters which differ from the system's default values.
- <STRONG>-q</STRONG> The terminal type is displayed to the standard output, and the
- terminal is not initialized in any way. The option "-" by itself
+ <STRONG>-q</STRONG> The terminal type is displayed to the standard output, and the
+ terminal is not initialized in any way. The option "-" by itself
is equivalent but archaic.
<STRONG>-r</STRONG> Print the terminal type to the standard error output.
<STRONG>-V</STRONG> reports the version of ncurses which was used in this program, and
exits.
- <STRONG>-w</STRONG> Resize
the window to match the size deduced via <STRONG><A HREF="curs_terminfo.3x.html">setupterm(3x)</A></STRONG>.
- Normally this has no effect, unless <STRONG>setupterm</STRONG> is not able to
+ <STRONG>-w</STRONG> Resize
the window to match the size deduced via <STRONG><A HREF="curs_terminfo.3x.html">setupterm(3x)</A></STRONG>.
+ Normally this has no effect, unless <STRONG>setupterm</STRONG> is not able to
detect the window size.
- The arguments for the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options may either be entered as
- actual characters or by using the "hat" notation, i.e., control-h may
+ The arguments for the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options may either be entered as
+ actual characters or by using the "hat" notation, i.e., control-h may
be specified as "^H" or "^h".
If neither <STRONG>-c</STRONG> or <STRONG>-w</STRONG> is given, both options are assumed.
</PRE><H2><a name="h2-SETTING-THE-ENVIRONMENT">SETTING THE ENVIRONMENT</a></H2><PRE>
- It is often desirable to enter the terminal type and information about
+ It is often desirable to enter the terminal type and information about
the terminal's capabilities into the shell's environment. This is done
using the <STRONG>-s</STRONG> option.
- When the <STRONG>-s</STRONG> option is specified, the commands to enter the information
- into the shell's environment are written to the standard output. If
- the <STRONG>SHELL</STRONG> environmental variable ends in "csh", the commands are for
- <STRONG>csh</STRONG>, otherwise, they are for <STRONG>sh(1)</STRONG>. Note, the <STRONG>csh</STRONG> commands set and
- unset the shell variable <STRONG>noglob</STRONG>, leaving it unset. The following line
- in the <STRONG>.login</STRONG> or <STRONG>.profile</STRONG> files will initialize the environment
+ When the <STRONG>-s</STRONG> option is specified, the commands to enter the information
+ into the shell's environment are written to the standard output. If
+ the <STRONG>SHELL</STRONG> environmental variable ends in "csh", the commands are for
+ <STRONG>csh</STRONG>, otherwise, they are for <STRONG>sh(1)</STRONG>. Note, the <STRONG>csh</STRONG> commands set and
+ unset the shell variable <STRONG>noglob</STRONG>, leaving it unset. The following line
+ in the <STRONG>.login</STRONG> or <STRONG>.profile</STRONG> files will initialize the environment
correctly:
eval `tset -s options ... `
</PRE><H2><a name="h2-TERMINAL-TYPE-MAPPING">TERMINAL TYPE MAPPING</a></H2><PRE>
- When the terminal is not hardwired into the system (or the current
- system information is incorrect) the terminal type derived from the
- <EM>/etc/ttys</EM> file or the <STRONG>TERM</STRONG> environmental variable is often something
- generic like <STRONG>network</STRONG>, <STRONG>dialup</STRONG>, or <STRONG>unknown</STRONG>. When <STRONG>tset</STRONG> is used in a
- startup script it is often desirable to provide information about the
+ When the terminal is not hardwired into the system (or the current
+ system information is incorrect) the terminal type derived from the
+ <EM>/etc/ttys</EM> file or the <STRONG>TERM</STRONG> environmental variable is often something
+ generic like <STRONG>network</STRONG>, <STRONG>dialup</STRONG>, or <STRONG>unknown</STRONG>. When <STRONG>tset</STRONG> is used in a
+ startup script it is often desirable to provide information about the
type of terminal used on such ports.
- The <STRONG>-m</STRONG> options maps from some set of conditions to a terminal type,
+ The <STRONG>-m</STRONG> options maps from some set of conditions to a terminal type,
that is, to tell <STRONG>tset</STRONG> "If I'm on this port at a particular speed, guess
that I'm on that kind of terminal".
- The argument to the <STRONG>-m</STRONG> option consists of an optional port type, an
- optional operator, an optional baud rate specification, an optional
- colon (":") character and a terminal type. The port type is a string
- (delimited by either the operator or the colon character). The
- operator may be any combination of ">", "<", "@", and "!"; ">" means
- greater than, "<" means less than, "@" means equal to and "!" inverts
- the sense of the test. The baud rate is specified as a number and is
- compared with the speed of the standard error output (which should be
+ The argument to the <STRONG>-m</STRONG> option consists of an optional port type, an
+ optional operator, an optional baud rate specification, an optional
+ colon (":") character and a terminal type. The port type is a string
+ (delimited by either the operator or the colon character). The
+ operator may be any combination of ">", "<", "@", and "!"; ">" means
+ greater than, "<" means less than, "@" means equal to and "!" inverts
+ the sense of the test. The baud rate is specified as a number and is
+ compared with the speed of the standard error output (which should be
the control terminal). The terminal type is a string.
- If the terminal type is not specified on the command line, the <STRONG>-m</STRONG>
- mappings are applied to the terminal type. If the port type and baud
- rate match the mapping, the terminal type specified in the mapping
- replaces the current type. If more than one mapping is specified, the
+ If the terminal type is not specified on the command line, the <STRONG>-m</STRONG>
+ mappings are applied to the terminal type. If the port type and baud
+ rate match the mapping, the terminal type specified in the mapping
+ replaces the current type. If more than one mapping is specified, the
first applicable mapping is used.
- For example, consider the following mapping: <STRONG>dialup>9600:vt100</STRONG>. The
+ For example, consider the following mapping: <STRONG>dialup>9600:vt100</STRONG>. The
port type is dialup , the operator is >, the baud rate specification is
9600, and the terminal type is vt100. The result of this mapping is to
- specify that if the terminal type is <STRONG>dialup</STRONG>, and the baud rate is
+ specify that if the terminal type is <STRONG>dialup</STRONG>, and the baud rate is
greater than 9600 baud, a terminal type of <STRONG>vt100</STRONG> will be used.
- If no baud rate is specified, the terminal type will match any baud
- rate. If no port type is specified, the terminal type will match any
- port type. For example, <STRONG>-m</STRONG> <STRONG>dialup:vt100</STRONG> <STRONG>-m</STRONG> <STRONG>:?xterm</STRONG> will cause any
+ If no baud rate is specified, the terminal type will match any baud
+ rate. If no port type is specified, the terminal type will match any
+ port type. For example, <STRONG>-m</STRONG> <STRONG>dialup:vt100</STRONG> <STRONG>-m</STRONG> <STRONG>:?xterm</STRONG> will cause any
dialup port, regardless of baud rate, to match the terminal type vt100,
- and any non-dialup port type to match the terminal type ?xterm. Note,
- because of the leading question mark, the user will be queried on a
+ and any non-dialup port type to match the terminal type ?xterm. Note,
+ because of the leading question mark, the user will be queried on a
default port as to whether they are actually using an xterm terminal.
- No whitespace characters are permitted in the <STRONG>-m</STRONG> option argument.
- Also, to avoid problems with meta-characters, it is suggested that the
+ No whitespace characters are permitted in the <STRONG>-m</STRONG> option argument.
+ Also, to avoid problems with meta-characters, it is suggested that the
entire <STRONG>-m</STRONG> option argument be placed within single quote characters, and
- that <STRONG>csh</STRONG> users insert a backslash character ("\") before any
+ that <STRONG>csh</STRONG> users insert a backslash character ("\") before any
exclamation marks ("!").
</PRE><H2><a name="h2-HISTORY">HISTORY</a></H2><PRE>
- A <STRONG>reset</STRONG> command appeared in 1BSD (March 1978), written by Kurt Shoens.
- This program set the <EM>erase</EM> and <EM>kill</EM> characters to <STRONG>^H</STRONG> (backspace) and <STRONG>@</STRONG>
+ A <STRONG>reset</STRONG> command appeared in 1BSD (March 1978), written by Kurt Shoens.
+ This program set the <EM>erase</EM> and <EM>kill</EM> characters to <STRONG>^H</STRONG> (backspace) and <STRONG>@</STRONG>
respectively. Mark Horton improved that in 3BSD (October 1979), adding
- <EM>intr</EM>, <EM>quit</EM>, <EM>start</EM>/<EM>stop</EM> and <EM>eof</EM> characters as well as changing the
- program to avoid modifying any user settings. That version of <STRONG>reset</STRONG>
+ <EM>intr</EM>, <EM>quit</EM>, <EM>start</EM>/<EM>stop</EM> and <EM>eof</EM> characters as well as changing the
+ program to avoid modifying any user settings. That version of <STRONG>reset</STRONG>
did not use the termcap database.
- A separate <STRONG>tset</STRONG> command was provided in 1BSD by Eric Allman, using the
- termcap database. Allman's comments in the source code indicate that
+ A separate <STRONG>tset</STRONG> command was provided in 1BSD by Eric Allman, using the
+ termcap database. Allman's comments in the source code indicate that
he began work in October 1977, continuing development over the next few
years.
According to comments in the source code, the <STRONG>tset</STRONG> program was modified
- in September 1980, to use logic copied from the 3BSD "reset" when it
+ in September 1980, to use logic copied from the 3BSD "reset" when it
was invoked as <STRONG>reset</STRONG>. This version appeared in 4.1cBSD, late in 1982.
Other developers (e.g., Keith Bostic and Jim Bloom) continued to modify
<STRONG>tset</STRONG> until 4.4BSD was released in 1993.
- The <STRONG>ncurses</STRONG> implementation was lightly adapted from the 4.4BSD sources
+ The <STRONG>ncurses</STRONG> implementation was lightly adapted from the 4.4BSD sources
for a terminfo environment by Eric S. Raymond <esr@snark.thyrsus.com>.
</PRE><H2><a name="h2-COMPATIBILITY">COMPATIBILITY</a></H2><PRE>
- Neither IEEE Std 1003.1/The Open Group Base Specifications Issue 7
+ Neither IEEE Std 1003.1/The Open Group Base Specifications Issue 7
(POSIX.1-2008) nor X/Open Curses Issue 7 documents <STRONG>tset</STRONG> or <STRONG>reset</STRONG>.
- The AT&T <STRONG>tput</STRONG> utility (AIX, HPUX, Solaris) incorporated the terminal-
- mode manipulation as well as termcap-based features such as resetting
- tabstops from <STRONG>tset</STRONG> in BSD (4.1c), presumably with the intention of
- making <STRONG>tset</STRONG> obsolete. However, each of those systems still provides
- <STRONG>tset</STRONG>. In fact, the commonly-used <STRONG>reset</STRONG> utility is always an alias for
+ The AT&T <STRONG>tput</STRONG> utility (AIX, HPUX, Solaris) incorporated the terminal-
+ mode manipulation as well as termcap-based features such as resetting
+ tabstops from <STRONG>tset</STRONG> in BSD (4.1c), presumably with the intention of
+ making <STRONG>tset</STRONG> obsolete. However, each of those systems still provides
+ <STRONG>tset</STRONG>. In fact, the commonly-used <STRONG>reset</STRONG> utility is always an alias for
<STRONG>tset</STRONG>.
- The <STRONG>tset</STRONG> utility provides for backward-compatibility with BSD
- environments (under most modern UNIXes, <STRONG>/etc/inittab</STRONG> and <STRONG>getty(1)</STRONG> can
- set <STRONG>TERM</STRONG> appropriately for each dial-up line; this obviates what was
- <STRONG>tset</STRONG>'s most important use). This implementation behaves like 4.4BSD
+ The <STRONG>tset</STRONG> utility provides for backward-compatibility with BSD
+ environments (under most modern UNIXes, <STRONG>/etc/inittab</STRONG> and <STRONG>getty(1)</STRONG> can
+ set <STRONG>TERM</STRONG> appropriately for each dial-up line; this obviates what was
+ <STRONG>tset</STRONG>'s most important use). This implementation behaves like 4.4BSD
<STRONG>tset</STRONG>, with a few exceptions specified here.
- A few options are different because the <STRONG>TERMCAP</STRONG> variable is no longer
+ A few options are different because the <STRONG>TERMCAP</STRONG> variable is no longer
supported under terminfo-based <STRONG>ncurses</STRONG>:
- <STRONG>o</STRONG> The <STRONG>-S</STRONG> option of BSD <STRONG>tset</STRONG> no longer works; it prints an error
+ <STRONG>o</STRONG> The <STRONG>-S</STRONG> option of BSD <STRONG>tset</STRONG> no longer works; it prints an error
message to the standard error and dies.
<STRONG>o</STRONG> The <STRONG>-s</STRONG> option only sets <STRONG>TERM</STRONG>, not <STRONG>TERMCAP</STRONG>.
- There was an undocumented 4.4BSD feature that invoking <STRONG>tset</STRONG> via a link
- named "TSET" (or via any other name beginning with an upper-case
+ There was an undocumented 4.4BSD feature that invoking <STRONG>tset</STRONG> via a link
+ named "TSET" (or via any other name beginning with an upper-case
letter) set the terminal to use upper-case only. This feature has been
omitted.
The <STRONG>-A</STRONG>, <STRONG>-E</STRONG>, <STRONG>-h</STRONG>, <STRONG>-u</STRONG> and <STRONG>-v</STRONG> options were deleted from the <STRONG>tset</STRONG> utility in
- 4.4BSD. None of them were documented in 4.3BSD and all are of limited
- utility at best. The <STRONG>-a</STRONG>, <STRONG>-d</STRONG>, and <STRONG>-p</STRONG> options are similarly not
- documented or useful, but were retained as they appear to be in
- widespread use. It is strongly recommended that any usage of these
+ 4.4BSD. None of them were documented in 4.3BSD and all are of limited
+ utility at best. The <STRONG>-a</STRONG>, <STRONG>-d</STRONG>, and <STRONG>-p</STRONG> options are similarly not
+ documented or useful, but were retained as they appear to be in
+ widespread use. It is strongly recommended that any usage of these
three options be changed to use the <STRONG>-m</STRONG> option instead. The <STRONG>-a</STRONG>, <STRONG>-d</STRONG>, and
<STRONG>-p</STRONG> options are therefore omitted from the usage summary above.
- Very old systems, e.g., 3BSD, used a different terminal driver which
- was replaced in 4BSD in the early 1980s. To accommodate these older
- systems, the 4BSD <STRONG>tset</STRONG> provided a <STRONG>-n</STRONG> option to specify that the new
- terminal driver should be used. This implementation does not provide
+ Very old systems, e.g., 3BSD, used a different terminal driver which
+ was replaced in 4BSD in the early 1980s. To accommodate these older
+ systems, the 4BSD <STRONG>tset</STRONG> provided a <STRONG>-n</STRONG> option to specify that the new
+ terminal driver should be used. This implementation does not provide
that choice.
- It is still permissible to specify the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options without
+ It is still permissible to specify the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options without
arguments, although it is strongly recommended that such usage be fixed
to explicitly specify the character.
- As of 4.4BSD, executing <STRONG>tset</STRONG> as <STRONG>reset</STRONG> no longer implies the <STRONG>-Q</STRONG> option.
+ As of 4.4BSD, executing <STRONG>tset</STRONG> as <STRONG>reset</STRONG> no longer implies the <STRONG>-Q</STRONG> option.
Also, the interaction between the - option and the <EM>terminal</EM> argument in
some historic implementations of <STRONG>tset</STRONG> has been removed.
- The <STRONG>-c</STRONG> and <STRONG>-w</STRONG> options are not found in earlier implementations.
+ The <STRONG>-c</STRONG> and <STRONG>-w</STRONG> options are not found in earlier implementations.
However, a different window size-change feature was provided in 4.4BSD.
- <STRONG>o</STRONG> In 4.4BSD, <STRONG>tset</STRONG> uses the window size from the termcap description
- to set the window size if <STRONG>tset</STRONG> is not able to obtain the window
+ <STRONG>o</STRONG> In 4.4BSD, <STRONG>tset</STRONG> uses the window size from the termcap description
+ to set the window size if <STRONG>tset</STRONG> is not able to obtain the window
size from the operating system.
<STRONG>o</STRONG> In ncurses, <STRONG>tset</STRONG> obtains the window size using <STRONG>setupterm</STRONG>, which may
- be from the operating system, the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment
+ be from the operating system, the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment
variables or the terminal description.
- Obtaining the window size from the terminal description is common to
- both implementations, but considered obsolescent. Its only practical
+ Obtaining the window size from the terminal description is common to
+ both implementations, but considered obsolescent. Its only practical
use is for hardware terminals. Generally speaking, a window size would
- be unset only if there were some problem obtaining the value from the
- operating system (and <STRONG>setupterm</STRONG> would still fail). For that reason,
- the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment variables may be useful for working
- around window-size problems. Those have the drawback that if the
- window is resized, those variables must be recomputed and reassigned.
+ be unset only if there were some problem obtaining the value from the
+ operating system (and <STRONG>setupterm</STRONG> would still fail). For that reason,
+ the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment variables may be useful for working
+ around window-size problems. Those have the drawback that if the
+ window is resized, those variables must be recomputed and reassigned.
To do this more easily, use the <STRONG>resize(1)</STRONG> program.
The <STRONG>tset</STRONG> command uses these environment variables:
SHELL
- tells <STRONG>tset</STRONG> whether to initialize <STRONG>TERM</STRONG> using <STRONG>sh(1)</STRONG> or <STRONG>csh(1)</STRONG>
+ tells <STRONG>tset</STRONG> whether to initialize <STRONG>TERM</STRONG> using <STRONG>sh(1)</STRONG> or <STRONG>csh(1)</STRONG>
syntax.
- TERM Denotes your terminal type. Each terminal type is distinct,
+ TERM Denotes your terminal type. Each terminal type is distinct,
though many are similar.
TERMCAP
- may denote the location of a termcap database. If it is not an
- absolute pathname, e.g., begins with a "/", <STRONG>tset</STRONG> removes the
- variable from the environment before looking for the terminal
+ may denote the location of a termcap database. If it is not an
+ absolute pathname, e.g., begins with a "/", <STRONG>tset</STRONG> removes the
+ variable from the environment before looking for the terminal
description.
</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/etc/ttys
- system port name to terminal type mapping database (BSD versions
+ system port name to terminal type mapping database (BSD versions
only).
/usr/share/terminfo
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG>csh(1)</STRONG>,
<STRONG>sh(1)</STRONG>, <STRONG>stty(1)</STRONG>, <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>, <STRONG>tty(4)</STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>,
+ <STRONG>csh(1)</STRONG>,
<STRONG>sh(1)</STRONG>, <STRONG>stty(1)</STRONG>, <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>, <STRONG>tty(4)</STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>,
<STRONG>ttys(5)</STRONG>, <STRONG>environ(7)</STRONG>
- This describes <STRONG>ncurses</STRONG> version 6.4 (patch 20230423).
+ This describes <STRONG>ncurses</STRONG> version 6.4 (patch 20230610).
projects / ncurses.git / blobdiff