+Initially the terminal may or may not be in \fB\%cbreak\fP mode,
+as the mode is inherited;
+therefore,
+a program should call \fB\%cbreak\fP or \fB\%nocbreak\fP explicitly.
+Most interactive programs using
+.I curses
+set the \fB\%cbreak\fP mode.
+Note that \fB\%cbreak\fP overrides \fBraw\fP.
+[See \fB\%curs_getch\fP(3X) for a discussion of how these routines
+interact with \fBecho\fP and \fB\%noecho\fP.]
+.\"
+.SS "echo, noecho"
+The \fBecho\fP and \fB\%noecho\fP routines control whether characters
+typed by the user are echoed by \fB\%getch\fP(3X) as they are typed.
+Echoing by the terminal driver is always disabled,
+but initially \fB\%getch\fP is in echo mode,
+so characters typed are echoed.
+Authors of most interactive programs prefer to do
+their own echoing in a controlled area of the screen,
+or not to echo at all,
+so they disable echoing by calling \fB\%noecho\fP.
+[See \fB\%curs_getch\fP(3X) for a
+discussion of how these routines interact with \fB\%cbreak\fP and
+\fB\%nocbreak\fP.]
+.\"
+.SS halfdelay
+The \fB\%halfdelay\fP routine is used for half-delay mode,
+which is similar to \fB\%cbreak\fP mode in that characters typed by the
+user are immediately available to the program.
+However,
+after blocking for \fItenths\fP tenths of seconds,
+\fBERR\fP is returned if nothing has been typed.
+The value of \fItenths\fP must be a number between 1 and 255.
+Use \fB\%nocbreak\fP to leave half-delay mode.
+.\"
+.SS intrflush
+If the \fB\%intrflush\fP option is enabled
+.RI ( bf
+is
+.BR TRUE ),
+and an interrupt key is pressed on the keyboard
+(interrupt,
+break,
+quit),
+all output in the terminal driver queue is flushed,
+giving the effect of faster response to the interrupt,
+but causing
+.I curses
+to have the wrong idea of what is on the screen.
+Disabling the option
+.RI ( bf
+is
+.BR FALSE ),
+prevents the flush.
+The default for the option is inherited from the terminal driver
+settings.
+The
+.I win
+argument is ignored.
+.\"
+.SS keypad
+The \fB\%keypad\fP option enables the keypad of the user's terminal.
+If
+enabled
+.RI ( bf
+is
+.BR TRUE ),
+the user can press a function key
+(such as an arrow key)
+and \fB\%wgetch\fP(3X) returns a single value representing the function
+key,
+as in \fB\%KEY_LEFT\fP.
+If disabled
+(\fIbf\fP is \fBFALSE\fP),
+.I curses
+does not treat function keys specially and the program has to interpret
+the escape sequences itself.
+If the keypad in the terminal can be turned on
+(made to transmit)
+and off
+(made to work locally),
+turning on this option causes the terminal keypad to be turned on when
+\fB\%wgetch\fP(3X) is called.
+The default value for keypad is \fBFALSE\fP.
+.\"
+.SS meta
+Initially,
+whether the terminal returns 7 or 8 significant bits on input depends on
+the control mode of the terminal driver [see \fI\%termios\fP(3)].
+To force 8 bits to be returned,
+invoke
+\fBmeta\fP(\fIwin\fP, \fBTRUE\fP);
+this is equivalent,
+under POSIX,
+to setting the CS8 flag on the terminal.
+To force 7 bits to be returned,
+invoke
+\fBmeta\fP(\fIwin\fP, \fBFALSE\fP);
+this is equivalent,
+under POSIX,
+to setting the CS7 flag on the terminal.
+The window argument,
+.IR win ,
+is always ignored.
+If the terminfo capabilities
+\fBsmm\fP (meta_on) and
+\fBrmm\fP (meta_off) are defined for the terminal,
+\fBsmm\fP is sent to the terminal when
+\fBmeta\fP(\fIwin\fP, \fBTRUE\fP)
+is called and \fBrmm\fP is sent when
+\fBmeta\fP(\fIwin\fP, \fBFALSE\fP) is called.
+.\"
+.SS "nl, nonl"
+The \fBnl\fP and \fBnonl\fP routines control whether the underlying
+display device translates the return key into newline on input.
+.\"
+.SS nodelay
+The \fB\%nodelay\fP option causes \fB\%getch\fP to be a non-blocking
+call.
+If no input is ready,
+\fB\%getch\fP returns \fBERR\fP.
+If disabled
+.RI ( bf
+is
+.BR FALSE ),
+\fB\%getch\fP waits until a key is pressed.
+.SS notimeout
+When interpreting an escape sequence,
+\fB\%wgetch\fP(3X) sets a timer
+while waiting for the next character.
+If
+\fB\%notimeout(\fIwin\fR, \fBTRUE\fP)
+is called,
+then \fB\%wgetch\fP does not set a timer.
+The purpose of the timeout is to distinguish sequences produced by a
+function key from those typed by a user.
+.\"
+.SS "raw, noraw"
+The \fBraw\fP and \fB\%noraw\fP routines place the terminal into or out
+of raw mode.
+Raw mode is similar to \fB\%cbreak\fP mode,
+in that characters typed are immediately passed through to the user
+program.
+The differences are that in raw mode,
+the interrupt,
+quit,
+suspend,
+and flow control characters are all
+passed through uninterpreted,
+instead of generating a signal.
+The behavior of the BREAK key depends on other bits in the terminal
+driver that are not set by
+.IR curses .
+.\"
+.SS "qiflush, nqiflush"
+When the \fB\%noqiflush\fP routine is used,
+normal flush of input and output queues associated with the \fBINTR\fP,
+\fBQUIT\fP and \fBSUSP\fP characters will not be done
+[see \fB\%termios\fP(3)].
+When
+\fB\%qiflush\fP is called,
+the queues will be flushed when these control characters are read.
+You may want to call \fB\%noqiflush\fP in a signal handler if you want
+output to continue as though the interrupt had not occurred,
+after the handler exits.
+.\"
+.SS "timeout, wtimeout"
+The \fB\%timeout\fP and \fB\%wtimeout\fP routines set blocking or
+non-blocking read for a given window.
+If \fIdelay\fP is negative,
+a blocking read is used
+(i.e.,
+waits indefinitely for input).
+If \fIdelay\fP is zero,
+then a non-blocking read is used
+(i.e.,
+.I read
+returns \fBERR\fP if no input is waiting).
+If
+\fIdelay\fP is positive,
+then
+.I read
+blocks for \fIdelay\fP milliseconds,
+and returns \fBERR\fP if there is still no input.
+Hence,
+these routines provide the same functionality as \fB\%nodelay\fP,
projects / ncurses.git / blobdiff