'\" t
.\"***************************************************************************
-.\" Copyright (c) 1998-2012,2016 Free Software Foundation, Inc. *
+.\" Copyright (c) 1998-2016,2017 Free Software Foundation, Inc. *
.\" *
.\" Permission is hereby granted, free of charge, to any person obtaining a *
.\" copy of this software and associated documentation files (the *
.\" authorization. *
.\"***************************************************************************
.\"
-.\" $Id: tput.1,v 1.36 2016/04/02 23:41:08 tom Exp $
+.\" $Id: tput.1,v 1.56 2017/11/18 23:51:17 tom Exp $
.TH @TPUT@ 1 ""
.ds d @TERMINFO@
.ds n 1
+.ie \n(.g .ds `` \(lq
+.el .ds `` ``
+.ie \n(.g .ds '' \(rq
+.el .ds '' ''
.de bP
-.IP \(bu 4
+.ie n .IP \(bu 4
+.el .IP \(bu 2
..
.SH NAME
\fB@TPUT@\fR, \fBreset\fR \- initialize a terminal or query terminfo database
.SH SYNOPSIS
\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fIcapname\fR [\fIparameters\fR]
.br
+\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] [\fB\-x\fP] \fBclear\fR
+.br
\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fBinit\fR
.br
\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fBreset\fR
and the \fIcapname\fR associated with each, see \fBterminfo\fR(5).
.SS Options
.TP
-\fB\-T\fR\fItype\fR
-indicates the \fItype\fR of terminal.
-Normally this option is
-unnecessary, because the default is taken from the environment
-variable \fBTERM\fR.
-If \fB\-T\fR is specified, then the shell
-variables \fBLINES\fR and \fBCOLUMNS\fR will also be ignored.
-.TP
\fB\-S\fR
allows more than one capability per invocation of \fB@TPUT@\fR. The
capabilities must be passed to \fB@TPUT@\fR from the standard input
meaning of the \fB0\fR and \fB1\fR boolean and string exit codes (see the
EXIT CODES section).
.IP
-Again, \fB@TPUT@\fR uses a table and the presence of parameters in its input
+Because some capabilities may use
+\fIstring\fP parameters rather than \fInumbers\fP,
+\fB@TPUT@\fR uses a table and the presence of parameters in its input
to decide whether to use \fBtparm\fR(3X),
and how to interpret the parameters.
.TP
+\fB\-T\fR\fItype\fR
+indicates the \fItype\fR of terminal.
+Normally this option is
+unnecessary, because the default is taken from the environment
+variable \fBTERM\fR.
+If \fB\-T\fR is specified, then the shell
+variables \fBLINES\fR and \fBCOLUMNS\fR will also be ignored.
+.TP
\fB\-V\fR
reports the version of ncurses which was used in this program, and exits.
+.TP
+.B \-x
+do not attempt to clear the terminal's scrollback buffer
+using the extended \*(``E3\*('' capability.
.SS Commands
+A few commands (\fBinit\fP, \fBreset\fP and \fBlongname\fP) are
+special; they are defined by the \fB@TPUT@\fP program.
+The others are the names of \fIcapabilities\fP from the terminal database
+(see \fBterminfo\fR(5) for a list).
+Although \fBinit\fP and \fBreset\fP resemble capability names,
+\fB@TPUT@\fP uses several capabilities to perform these special functions.
.TP
\fIcapname\fR
-indicates the capability from the \fBterminfo\fR database. When
-\fBtermcap\fR support is compiled in, the \fBtermcap\fR name for
-the capability is also accepted.
+indicates the capability from the terminal database.
.IP
If the capability is a string that takes parameters, the arguments
following the capability will be used as parameters for the string.
.IP
Most parameters are numbers.
-Only a few terminfo capabilities require string parameters;
+Only a few terminal capabilities require string parameters;
\fB@TPUT@\fR uses a table to decide which to pass as strings.
Normally \fB@TPUT@\fR uses \fBtparm\fR(3X) to perform the substitution.
If no parameters are given for the capability,
\fB@TPUT@\fR writes the string without performing the substitution.
.TP
\fBinit\fR
-If the \fBterminfo\fR database is present and an entry for the user's
+If the terminal database is present and an entry for the user's
terminal exists (see \fB\-T\fR\fItype\fR, above), the following will
occur:
.RS
.TP 5
(1)
-if present, the terminal's initialization strings will be
-output as detailed in the \fBterminfo\fR(5) section on
-.IR "Tabs and Initialization" ,
+first, \fB@TPUT@\fR retrieves the current terminal mode settings
+for your terminal.
+It does this by successively testing
+.RS
+.bP
+the standard error,
+.bP
+standard output,
+.bP
+standard input and
+.bP
+ultimately \*(lq/dev/tty\*(rq
+.RE
+.IP
+to obtain terminal settings.
+Having retrieved these settings, \fB@TPUT@\fP remembers which
+file descriptor to use when updating settings.
.TP
(2)
-any delays (e.g., newline) specified in the entry will
-be set in the tty driver,
+if the window size cannot be obtained from the operating system,
+but the terminal description (or environment, e.g., \fBLINES\fP
+and \fBCOLUMNS\fP variables specify this),
+update the operating system's notion of the window size.
.TP
(3)
+the terminal modes will be updated:
+.RS
+.bP
+any delays (e.g., newline) specified in the entry will
+be set in the tty driver,
+.bP
tabs expansion will be turned on or off according to
the specification in the entry, and
-.TP
-(4)
+.bP
if tabs are not expanded,
standard tabs will be set (every 8 spaces).
.RE
+.TP
+(4)
+if present, the terminal's initialization strings will be
+output as detailed in the \fBterminfo\fR(5) section on
+.IR "Tabs and Initialization" ,
+.TP
+(5)
+output is flushed.
+.RE
.IP
If an entry does not
contain the information needed for any of these activities,
that activity will silently be skipped.
.TP
\fBreset\fR
-Instead of putting out initialization strings, the terminal's
-reset strings will be output if present (\fBrs1\fR, \fBrs2\fR, \fBrs3\fR, \fBrf\fR).
-If the reset strings are not present, but initialization
-strings are, the initialization strings will be output.
+This is similar to \fBinit\fP, with two differences:
+.RS
+.TP 5
+(1)
+before any other initialization,
+the terminal modes will be reset to a \*(``sane\*('' state:
+.RS
+.bP
+set cooked and echo modes,
+.bP
+turn off cbreak and raw modes,
+.bP
+turn on newline translation and
+.bP
+reset any unset special characters to their default values
+.RE
+.TP 5
+(2)
+Instead of putting out \fIinitialization\fP strings, the terminal's
+\fIreset\fP strings will be output if present
+(\fBrs1\fR, \fBrs2\fR, \fBrs3\fR, \fBrf\fR).
+If the \fIreset\fP strings are not present, but \fIinitialization\fP
+strings are, the \fIinitialization\fP strings will be output.
+.RE
+.IP
Otherwise, \fBreset\fR acts identically to \fBinit\fR.
.TP
\fBlongname\fR
-If the \fBterminfo\fR database is present and an entry for the
+If the terminal database is present and an entry for the
user's terminal exists (see \fB\-T\fR\fItype\fR above), then the long name
of the terminal will be put out. The long name is the last
name in the first line of the terminal's description in the
\fBterminfo\fR database [see \fBterm\fR(5)].
.SS Aliases
-\fB@TPUT@\fR handles the \fBinit\fP and \fBreset\fP commands specially:
+\fB@TPUT@\fR handles the \fBclear\fP, \fBinit\fP and \fBreset\fP
+commands specially:
it allows for the possibility that it is invoked by a link with those names.
.PP
If \fB@TPUT@\fR is invoked by a link named \fBreset\fR, this has the
same effect as \fB@TPUT@ reset\fR.
-The \fB@TSET@\fR(\*n) utility also treats a link named \fBreset\fP specially:
+The \fB@TSET@\fR(\*n) utility also treats a link named \fBreset\fP specially.
+.PP
+Before ncurses 6.1, the two utilities were different from each other:
.bP
-That utility resets the terminal modes and special characters (not done here).
+\fB@TSET@\fP utility reset the terminal modes and special characters
+(not done with \fB@TPUT@\fP).
.bP
-On the other hand, @TSET@'s repertoire of terminal capabilities for
-resetting the terminal is more limited, i.e., only \fBreset_1string\fP, \fBreset_2string\fP and \fBreset_file\fP
+On the other hand, \fB@TSET@\fP's repertoire of terminal capabilities for
+resetting the terminal was more limited, i.e., only \fBreset_1string\fP, \fBreset_2string\fP and \fBreset_file\fP
in contrast to the tab-stops and margins which are set by this utility.
.bP
-The \fBreset\fP program is usually an alias for @TSET@,
-due to the resetting of terminal modes and special characters.
+The \fBreset\fP program is usually an alias for \fB@TSET@\fP,
+because of this difference with resetting terminal modes and special characters.
+.PP
+With the changes made for ncurses 6.1, the \fIreset\fP feature of the
+two programs is (mostly) the same. A few differences remain:
+.bP
+The \fB@TSET@\fP program waits one second when resetting,
+in case it happens to be a hardware terminal.
+.bP
+The two programs write the terminal initialization strings
+to different streams (i.e.,. the standard error for \fB@TSET@\fP and the
+standard output for \fB@TPUT@\fP).
+.IP
+\fBNote:\fP although these programs write to different streams,
+redirecting their output to a file will capture only part of their actions.
+The changes to the terminal modes are not affected by redirecting the output.
.PP
If \fB@TPUT@\fR is invoked by a link named \fBinit\fR, this has the
same effect as \fB@TPUT@ init\fR.
.TP 5
\fB@TPUT@ cup 0 0\fR
Send the sequence to move the cursor to row \fB0\fR, column \fB0\fR
-(the upper left corner of the screen, usually known as the "home"
+(the upper left corner of the screen, usually known as the \*(lqhome\*(rq
cursor position).
.TP 5
\fB@TPUT@ clear\fR
tab settings for some terminals, in a format
appropriate to be output to the terminal (escape
sequences that set margins and tabs); for more
-information, see the "Tabs and Initialization"
+information, see the
+.IR "Tabs and Initialization" ,
section of \fBterminfo\fR(5)
.SH EXIT CODES
If the \fB\-S\fR option is used,
\fB>4\fR error occurred in \-S
=
.TE
+.SH HISTORY
+The \fBtput\fP command was begun by Bill Joy in 1980.
+The initial version only cleared the screen.
+.PP
+AT&T System V provided a different \fBtput\fP command,
+whose \fBinit\fP and \fBreset\fP subcommands
+(more than half the program) were incorporated from
+the \fBreset\fP feature of BSD \fBtset\fP written by Eric Allman.
+.PP
+Keith Bostic replaced the BSD \fBtput\fP command in 1989 with a new implementation
+based on the AT&T System V program \fBtput\fP.
+Like the AT&T program, Bostic's version
+accepted some parameters named for \fIterminfo capabilities\fP
+(\fBclear\fP, \fBinit\fP, \fBlongname\fP and \fBreset\fP).
+However (because he had only termcap available),
+it accepted \fItermcap names\fP for other capabilities.
+Also, Bostic's BSD \fBtput\fP did not modify the terminal I/O modes
+as the earlier BSD \fBtset\fP had done.
+.PP
+At the same time, Bostic added a shell script named \*(lqclear\*(rq,
+which used \fBtput\fP to clear the screen.
+.PP
+Both of these appeared in 4.4BSD,
+becoming the \*(lqmodern\*(rq BSD implementation of \fBtput\fP.
+.PP
+This implementation of \fBtput\fP began from a different source than
+AT&T or BSD: Ross Ridge's \fImytinfo\fP package, published on
+\fIcomp.sources.unix\fP in December 1992.
+Ridge's program made more sophisticated use of the terminal capabilities
+than the BSD program.
+Eric Raymond used the \fBtput\fP program
+(and other parts of \fImytinfo\fP) in ncurses in June 1995.
+Using the portions dealing with terminal capabilities
+almost without change,
+Raymond made improvements to the way the command-line parameters
+were handled.
.SH PORTABILITY
.PP
+This implementation of \fBtput\fP differs from AT&T \fBtput\fP in
+two important areas:
+.bP
+\fB@TPUT@\fP \fIcapname\fP writes to the standard output.
+That need not be a regular terminal.
+However, the subcommands which manipulate terminal modes
+may not use the standard output.
+.IP
+The AT&T implementation's \fBinit\fP and \fBreset\fP commands
+use the BSD (4.1c) \fBtset\fP source, which manipulates terminal modes.
+It successively tries standard output, standard error, standard input
+before falling back to \*(lq/dev/tty\*(rq and finally just assumes
+a 1200Bd terminal.
+When updating terminal modes, it ignores errors.
+.IP
+Until changes made after ncurses 6.0, \fB@TPUT@\fP did not modify terminal modes.
+\fB@TPUT@\fP now uses a similar scheme,
+using functions shared with \fB@TSET@\fP
+(and ultimately based on the 4.4BSD \fBtset\fP).
+If it is not able to open a terminal, e.g., when running in \fBcron\fP,
+\fB@TPUT@\fP will return an error.
+.bP
+AT&T \fBtput\fP guesses the type of its \fIcapname\fP operands by seeing if
+all of the characters are numeric, or not.
+.IP
+Most implementations which provide support for \fIcapname\fR operands
+use the \fItparm\fP function to expand parameters in it.
+That function expects a mixture of numeric and string parameters,
+requiring \fB@TPUT@\fP to know which type to use.
+.IP
+This implementation uses a table to determine the parameter types for
+the standard \fIcapname\fR operands, and an internal library
+function to analyze nonstandard \fIcapname\fR operands.
+.PP
+This implementation (unlike others) can accept both \fItermcap\fP
+and \fIterminfo\fP names for the \fIcapname\fP feature,
+if
+\fItermcap\fR support is compiled in.
+However, the predefined \fItermcap\fP and \fIterminfo\fP names have two
+ambiguities in this case (and the \fIterminfo\fP name is assumed):
+.bP
+The \fItermcap\fP name \fBdl\fP corresponds to
+the \fIterminfo\fP name \fBdl1\fP (delete one line).
+.br
+The \fIterminfo\fP name \fBdl\fP corresponds to
+the \fItermcap\fP name \fBDL\fP (delete a given number of lines).
+.bP
+The \fItermcap\fP name \fBed\fP corresponds to
+the \fIterminfo\fP name \fBrmdc\fP (end delete mode).
+.br
+The \fIterminfo\fP name \fBed\fP corresponds to
+the \fItermcap\fP name \fBcd\fP (clear to end of screen).
+.PP
The \fBlongname\fR and \fB\-S\fR options, and the parameter-substitution
-features used in the \fBcup\fR example, are not supported in BSD curses or in
-AT&T/USL curses before SVr4.
+features used in the \fBcup\fR example,
+were not supported in BSD curses before 4.3reno (1989) or in
+AT&T/USL curses before SVr4 (1988).
.PP
IEEE Std 1003.1/The Open Group Base Specifications Issue 7 (POSIX.1-2008)
documents only the operands for \fBclear\fP, \fBinit\fP and \fBreset\fP.
The others (\fBinit\fP and \fBlongname\fP) do not correspond to terminal
capabilities.
.bP
-Other implementations of \fB@TPUT@\fP on
+Other implementations of \fBtput\fP on
SVr4-based systems such as Solaris, IRIX64 and HPUX
as well as others such as AIX and Tru64
provide support for \fIcapname\fR operands.
.bP
A few platforms such as FreeBSD recognize termcap names rather
-than terminfo capability names in their respective \fB@TPUT@\fP commands.
+than terminfo capability names in their respective \fBtput\fP commands.
Since 2010, NetBSD's \fBtput\fP uses terminfo names.
Before that, it (like FreeBSD) recognized termcap names.
.PP
While it is certainly possible to write a \fBtput\fP program without using curses,
none of the systems which have a curses implementation provide
a \fBtput\fP utility which does not provide the \fIcapname\fP feature.
-.PP
-Most implementations which provide support for \fIcapname\fR operands
-use the \fItparm\fP function to expand parameters in it.
-That function expects a mixture of numeric and string parameters,
-requiring \fB@TPUT@\fP to know which type to use.
-This implementation uses a table to determine that for
-the standard \fIcapname\fR operands, and an internal library
-function to analyze nonstandard \fIcapname\fR operands.
-Other implementations may simply guess that an operand containing only digits
-is intended to be a number.
.SH SEE ALSO
\fB@CLEAR@\fR(\*n),
\fBstty\fR(1),
projects / ncurses.git / blobdiff