######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses.
-# Report bugs to
+# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
+# The original header is preserved below for reference. It is noted that there
+# is a newer version which differs in some cosmetic details; we have decided
+# to not change the header unless there is also a change in content.
+#
+#------------------------------------------------------------------------------
# Version 10.2.1
-# $Date: 2000/07/01 21:23:58 $
+# $Date: 2002/10/05 18:40:53 $
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
rmul=\E[m, smul=\E[4m,
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
bold=\E[1m,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
dim=\E[2m,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+pp|ansi printer port,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
# * *
# ***************************************************************************
#
-# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
-# and it matters, turn off <ccc>. The %02x escape used to implement this is
-# not back-portable to SV curses and not supported in ncurses versions before
-# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
-# themselves; this entry assumes that capability.
-#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# * *
# ***************************************************************************
#
-# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
-# and it matters, turn off <ccc>. The %02x escape used to implement this is
-# not back-portable to SV curses and not supported in ncurses versions before
-# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
+# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
-# The 2.2.x kernels add a private mode that sets the cursor type; use that to
-# get a block cursor for cvvis.
-# reported by Frank Heckenbach <frank@g-n-u.de>.
-linux|linux console,
+linux-basic|linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, civis=\E[?25l\E[?1c, clear=\E[H\E[J,
- cnorm=\E[?25h\E[?0c, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, cvvis=\E[?25h\E[?8c, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
- el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd,
use=klone+sgr, use=ecma+color,
+
linux-m|Linux console no color,
colors@, pairs@,
setab@, setaf@, setb@, setf@, use=linux,
-linux-c-nc|linux console 1.3.x hack for ncurses only,
+
+# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
+# and it matters, turn off <ccc>. The %02x escape used to implement this is
+# not supposedly back-portable to older SV curses (although it has worked fine
+# on Solaris for several years) and not supported in ncurses versions before
+# 1.9.9.
+linux-c-nc|linux console with color-change,
ccc,
- initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
- oc=\E]R, use=linux,
+ initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
+ oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
-linux-c|linux console 1.3.6+ with private palette for each virtual console,
+linux-c|linux console 1.3.6+ for older ncurses,
ccc,
- colors#8, pairs#64,
- initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
- oc=\E]R, use=linux,
+ initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
+ oc=\E]R, use=linux-basic,
+
+# The 2.2.x kernels add a private mode that sets the cursor type; use that to
+# get a block cursor for cvvis.
+# reported by Frank Heckenbach <frank@g-n-u.de>.
+linux|linux console,
+ civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
+ cvvis=\E[?25h\E[?8c, use=linux-c-nc,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
-# In this description based on SCO's keyboard(HW) manpage list of default function key
-# values:
+# In this description based on SCO's keyboard(HW) manpage list of default
+# function key values:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
-scoansi|SCO Extended ANSI standard crt,
- OTbs, am, eo, xon,
+#
+# hpa/vpa work in the console, but not in scoterm:
+# hpa=\E[%p1%dG,
+# vpa=\E[%p1%dd,
+#
+# SCO's terminfo uses
+# kLFT=\E[d,
+# kRIT=\E[c,
+# which do not work (console or scoterm).
+#
+# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
+scoansi-old|SCO Extended ANSI standard crt (5.0.5),
+ OTbs, am, bce, eo, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
- acsc=0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`ja0fxgqh2jYk?lZm@nEqDtCu4vAwBx3~y,
- blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
- cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
- ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, invis=\E[8m, kbeg=\E[E,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
+ dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
+ kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
- kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[37;40m, rev=\E[7m,
- ri=\E[T, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
- sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
+ rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
+ rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
+ smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+scoansi-new|SCO Extended ANSI standard crt (5.0.6),
+ km,
+ civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
+ cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
+ rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
+ smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
+ smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
+ smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
+ wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
+ use=scoansi-old,
+# make this easy to change...
+scoansi|SCO Extended ANSI standard crt,
+ use=scoansi-old,
# This actually describes the generic SVr4 display driver for Intel boxes.
# The <dim=\E[2m> isn't documented and therefore may not be reliable.
rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
smso=\E(, smul=\E[,
+#
+#
+qnxt|qnxt4|QNX4 terminal,
+ crxm, use=qnx4,
+#
+qnxm|QNX4 with mouse events,
+ maddr#1,
+ chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
+ mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
+ mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
+ smicm=\E/>2h, use=qnx4,
+#
+qnxw|QNX4 windows,
+ xvpa, use=qnxm,
+#
+# Monochrome QNX4 terminal or console. Setting this terminal type will
+# allow an application running on a color console to behave as if it
+# were a monochrome terminal. Output will be through stdout instead of
+# console writes because the term routines will recognize that the
+# terminal name starts with 'qnxt'.
+#
+qnxtmono|Monochrome QNX4 terminal or console,
+ colors@, pairs@,
+ scp@, use=qnx4,
# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
+# QNX ANSI terminal definition
+qansi-g|QNX ANSI,
+ am, eslok, hs, xon,
+ colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
+ fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
+ ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
+ is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
+ kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
+ kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
+ kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
+ kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
+ kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
+ kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
+ kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
+ kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
+ kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
+ kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
+ kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
+ kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
+ kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
+ kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
+ kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
+ khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
+ kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
+ kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
+ kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
+ ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
+ rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[2g,
+ tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
+#
+qansi|QNX ansi with console writes,
+ daisy, xhpa, use=qansi-g,
+#
+qansi-t|QNX ansi without console writes,
+ crxm, use=qansi,
+#
+qansi-m|QNX ansi with mouse,
+ maddr#1,
+ chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
+ mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
+ mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
+ smicm=\E[>2h, use=qansi,
+#
+qansi-w|QNX ansi for windows,
+ xvpa, use=qansi-m,
+
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
cols#132, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
+# OpenBSD implements a color variation
+pcvt25-color|dec vt220 emulation with 25 lines and color,
+ cols#80, lines#25,
+ is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
+ use=ecma+color,
+
# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
- kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[6m$<2>, ri=\EM$<5>,
+ kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
use=klone+color,
rcons-color|BSD rasterconsole with ANSI color,
bce,
colors#8, pairs#64,
- op=\E[m, setab=\E[4%dm, setaf=\E[3%dm, use=rcons,
+ op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
+#
+# The emulator sends difference strings based on shift- and control-keys,
+# like scoansi:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V,
- kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
- kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
- kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
- smso=\E[7m, vpa=\E[%i%p1%dd,
+ kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
+ kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
+ kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
+ kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
+ kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
+ kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
+ kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
+ kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
+ kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
+ khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
+ op=\E[x, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
+ rs2=\E[x\E[m\Ec, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
use=cons25w,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
- rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m,
vt420pcdos|DEC VT420 w/PC for DOS Merge,
lines#25,
- dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;,
+ dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
pctrm@,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
hts=\EH, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
use=vt220, use=ecma+color,
+# PuTTY 0.51 (released 14 December 2000)
+# http://www.chiark.greenend.org.uk/~sgtatham/putty/
+#
+# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
+# well as SCO and Atari, color palettes from Linux console). Reading the code,
+# it is intended to be VT102 plus selected features By default, it sets $TERM
+# to xterm, which is incorrect, since several features are misimplemented:
+#
+# Alt+key always sends ESC+key, so 'km' capability is removed.
+#
+# Control responses, wrapping and tabs are buggy, failing a couple of
+# screens in vttest.
+#
+# xterm mouse support is not implemented (unrelease version may).
+#
+# Several features such as backspace/delete are optional; this entry documents
+# the default behavior -TD
+putty|xterm clone (win32),
+ am, bw, ccc, km, mir, msgr, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+ ind=^J,
+ initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
+ kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, oc=\E]R, op=\E[39;49m, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd,
+
# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
# (communication program) which supports:
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
+#
+# Other notes:
+# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
+# for casual (occasional) use. Also fails several of the vttest screens,
+# but that is not unusual for vt100 "emulators".
+# b) Does not implement vt100 keypad
+# c) Recognizes a subset of vt52 controls.
ms-vt100|MS telnet imitating dec vt100,
lines#25,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- tbc@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\E[c,
- use=vt100,
+ ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
+ kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, u6=\E[%i%d;%dR, u7=\E[6n,
+ u8=\E[?6c, u9=\E[c, use=vt100,
+
+# Tested with Windows 2000, the telnet application runs in a console window,
+# also using 'Terminal' font.
+#
+# Other notes:
+# a) This version has no function keys or numeric keypad. Unlike the older
+# version, the numeric keypad is entirely ignored.
+# b) The program sets $TERM to "ansi", which of course is inaccurate.
+ms-vt100-color|windows 2000 ansi (sic),
+ bce,
+ dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
+ use=ms-vt100,
#### X terminal emulators
#
kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[27m, rmul=\E[24m, rs1=^O,
- rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
-# This beta version will probably be released in XFree86 4.0.
+# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
npc,
kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
- sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smcup=\E[?1049h, use=xterm-xf86-v333,
xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System),
- use=xterm-xf86-v40,
+ npc,
+ kDC=\E[3;2~, kEND=\EO2F, kHOM=\EO2H, kIC=\E[2;2~,
+ kLFT=\EO2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO2C,
+ kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\EO2P, kf14=\EO2Q,
+ kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~,
+ kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
+ kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P,
+ kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~,
+ kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
+ kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
+ kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
+ kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH,
+ kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ use=xterm-basic,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|xterm terminal emulator - common (XFree86),
+ am, bce, km, mc5i, mir, msgr, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
+ kdch1=\E[3~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
+ memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?1049h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
xterm-16color|xterm with 16 colors like aixterm,
- colors#16, pairs#256,
- setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
- setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
- setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
- setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
- use=xterm-xf86-v40,
+ ncv#32, use=ibm+16color, use=xterm-xfree86,
# These variants of XFree86 3.9.16 xterm are built as a configure option.
xterm-256color|xterm with 256 colors,
ccc,
- colors#256, pairs#256,
+ colors#256, ncv#32, pairs#256,
initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
setb=\E[48;5;%p1%dm, setf=\E[38;5;%p1%dm,
invis=\2338m,
is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
- kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B,
+ kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l,
rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
rs1=\Ec,
- rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
+ rs2=\E[62"p\E G\E7\233r\E8\233m\233?7h\233?1;3;4;6l\2334l\E>,
sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h,
smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m,
tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
- knp=\ES, kpp=\ET, use=xterm-xfree86,
-
+ knp=\ES, kpp=\ET, use=xterm-basic,
+
+xterm-sco|XFree86 xterm with SCO function keys,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
+ kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
+ kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e,
+ kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i,
+ kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n,
+ kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r,
+ kf33=\E[s, kf34=\E[t, kf35=\E[u, kf4=\E[P, kf5=\E[Q,
+ kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, use=xterm-basic,
+
+# The xterm-xfree86 description has all of the features, but is not completely
+# compatible with vt220. If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+# + maps the editing keypad
+# + interprets control-function-key as a second array of keys, so a
+# 12-fkey keyboard can support vt220's 20-fkeys.
+# + maps numeric keypad "+" to ",".
+# + uses DEC-style control sequences for the application keypad.
+#
xterm-vt220|XFree86 xterm emulating vt220,
- ka1=\EOw, ka3=\EOy, kbeg=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- use=xterm-xfree86,
+ ka1=\EOw, ka3=\EOy, kbeg=\EOu, kc1=\EOq, kc3=\EOs, kcbt=\E[Z,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[4~,
+ kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
+ kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
+ kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ use=xterm-basic,
xterm-vt52|XFree86 xterm emulating dec vt52,
cols#80, it#8, lines#24,
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
+# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
+# -- MATSUMOTO Shoji)
kterm|kterm kanji terminal emulator (X window system),
eslok, hs,
- acsc@, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs@, fsl=\E[?F,
- kmous=\E[M, rc=\E8, rmacs@, sc=\E7, smacs@,
+ acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
+ kmous=\E[M, rc=\E8, rmacs=\E(B, sc=\E7, smacs=\E(0,
tsl=\E[?E\E[?%i%dT, use=xterm-r6, use=ecma+color,
+kterm-color|kterm-co|kterm with ANSI colors,
+ ncv@, use=kterm, use=ecma+color,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=xterm,
op=\E[m, use=xterm-r6, use=klone+color,
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome|Gnome terminal,
+gnome-rh62|Gnome terminal,
bce,
kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=xterm-color,
+# GNOME Terminal 1.4.0.4 (Redhat 7.2)
+#
+# This implements a subset of vt102 with a random selection of features from
+# other terminals such as color and function-keys.
+#
+# shift-f1 to shift-f10 are f11 to f20
+#
+# NumLock changes the application keypad to approximate vt100 keypad, except
+# that there is no escape sequence matching comma (,).
+#
+# Other defects observed:
+# vt100 LNM mode is not implemented.
+# vt100 80/132 column mode is not implemented.
+# vt100 DECALN is not implemented.
+# vt100 DECSCNM mode is not implemented, so flash does not work.
+# vt100 TBC (tab reset) is not implemented.
+# xterm alternate screen controls do not restore cursor position properly
+# it hangs in tack after running function-keys test.
+gnome-rh72|GNOME Terminal,
+ bce,
+ civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
+ smam=\E[?7h, tbc@, use=xterm-color,
+
+gnome|GNOME Terminal,
+ use=gnome-rh72,
+
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal,
bce, km@,
kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
+# Konsole 1.0.1
+# (formerly known as kvt)
+#
+# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
+# simplify this entry (and point out why konsole isn't xterm), we base this on
+# xterm-r6. The default keyboard appears to be 'linux'.
+#
+# Notes:
+# a) konsole implements several features from XFree86 xterm, though none of
+# that is documented - except of course in its source code - apparently
+# because its implementors are unaccustomed to reading documentation - as
+# evidenced by the sparse and poorly edited documentation distributed with
+# konsole. Some features such as the 1049 private mode are recognized but
+# incorrectly implemented as a duplicate of the 47 private mode.
+# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
+# sends PC-style escapes rather than vt100.
+# c) fails vttest menu 3 (Test of character sets) because it does not properly
+# parse some control sequences. Also fails vttest Primary Device Attributes
+# by sending a bogus code (in the source it says it's supposed to be a
+# vt220, which is doubly incorrect because it does not implement vt220
+# control sequences except for a few special cases). Treat it as a
+# mildly-broken vt102.
+konsole-base|KDE console window,
+ bce, km@, npc,
+ bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
+ ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
+ hpa=\E[%i%p1%dG, kbs@, kdch1@, kend@, kf1@, kf10@, kf11@, kf12@,
+ kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@,
+ kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome@, kslt@,
+ rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smam=\E[?7h, vpa=\E[%i%p1%dd, use=ecma+color,
+ use=xterm-r6,
+konsole-linux|KDE console window with linux keyboard,
+ kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
+ kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ use=konsole-base,
+# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
+# than testing the code.
+konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
+ kend=\E[4~, khome=\E[1~, use=konsole-vt100,
+# The value for kbs reflects local customization rather than the settings used
+# for XFree86 xterm.
+konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
+ kbs=^H, kend=\EOF, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ khome=\EOH, use=konsole-vt100,
+# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
+# it is still useful for deriving the other entries.
+konsole-vt100|KDE console window with vt100 (sic) keyboard,
+ kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, use=konsole-base,
+konsole-vt420pc|KDE console window with vt420 pc keyboard,
+ kbs=^H, kdch1=\177, use=konsole-vt100,
+konsole-16color|klone of xterm-16color,
+ ncv#32, use=ibm+16color, use=konsole,
+# make a default entry for konsole
+konsole|KDE console window,
+ use=konsole-linux,
+
# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
# Notes:
ncv@,
sgr0=\E[m\017, use=rxvt-basic, use=ecma+color,
+# This variant is supposed to work with rxvt 2.7.7 when compiled with
+# NO_BRIGHTCOLOR defined. rxvt needs more work...
+rxvt-16color|xterm with 16 colors like aixterm,
+ ncv#32, use=ibm+16color, use=rxvt,
+
# From: Michael Jennings <mej@valinux.com>
# removed kf0 which conflicts with kf10 -TD
# remove cvvis which conflicts with cnorm -TD
-# There's no u6 because Eterm appears to lack CPR (cursor position report).
Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
am, bce, bw, eo, km, mc5i, mir, msgr, xenl, xon,
btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
- use=ecma+color,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, use=ecma+color,
# These (xtermc and xtermm) are distributed with Solaris. They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
OTbs, am, km, mir, msgr, xenl,
btns#3, cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
setaf=\Er%i%p1%d;, sgr0=\ES, smacs=\0, smir=\EY,
smso=\ES\ET, smul=\ES\EV, tbc=\Ej,
+# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
+# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
+# indicate that it emulates more than one terminal, but incompletely.
+#
+# This is dapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
+# It is based on vt102's entry, with some subtle differences, but also
+# has status line
+# supports ANSI colors (except for 'op' string)
+# apparently implements alternate screen like xterm
+# does not use padding, of course.
+mvterm|vv100|SwitchTerm aka mvTERM,
+ am, eslok, hs, km, mir, msgr, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
+ fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, ka1=\EOq,
+ ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
+ kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+ kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, op=\E[100m, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[?E\E[?%i%p1%dT,
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
# AX (bool) Does understand ANSI set default fg/bg color
# (\E[39m / \E[49m).
+# S0 (str) Switch charset 'G0' to the specified charset.
+# E0 (str) Switch charset 'G0' back to standard charset.
+#
+# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal,
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
colors#8, cols#80, it#8, lines#24, pairs#64,
cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
- kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~,
- kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
- rs2=\Ec, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7,
+ sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, S0=\E(%p1%c,
use=ecma+color,
+# Read the fine manpage:
+# When screen tries to figure out a terminal name for
+# itself, it first looks for an entry named "screen.<term>",
+# where <term> is the contents of your $TERM variable. If
+# no such entry exists, screen tries "screen" (or "screen-w"
+# if the terminal is wide (132 cols or more)). If even this
+# entry cannot be found, "vt100" is used as a substitute.
+#
+# Here are a few customized entries which are useful -TD
+#
+# Notes:
+# (a) screen does not support invis.
+# (b) screen's implementation of bw is incorrect according to tack.
+# (c) screen appears to hardcode the strings for khome/kend, making it
+# necessary to override the "use=" clause's values.
+# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
+# which is NOT the same as the terminfo screen.<term>.
+# (e) when screen finds one of these customized entries, it sets $TERM to
+# match. Hence, no "screen.xterm" entry is provided, since that would
+# create heartburn for people running remote xterm's.
+#
+# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
+# since the default translations override the built-in keycode
+# translation. They are suppressed here to show what is tested by tack.
+screen.xterm-xfree86|screen customized for XFree86 xterm,
+ bce@, bw,
+ invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@,
+ memu@,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ use=xterm-xfree86,
+# xterm-r6 does not really support khome/kend unless it is propped up by
+# the translations resource.
+screen.xterm-r6|screen customized for X11R6 xterm,
+ bw, use=xterm-r6,
+# Color applications running in screen and TeraTerm do not play well together
+# on Solaris.
+screen.teraterm|disable ncv in teraterm,
+ ncv#127, use=screen,
+
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen,
rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
- rs2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, sc=\E7,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7,
smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
#### Pilot Pro Palm-Top
#
-# From: Jason Downs <downsj@downsj.com>, 15 Jun 1997 (Top Gun Telnet's author)
+# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
+# http://www.isaac.cs.berkeley.edu/pilot/tgtelnet.html
pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
- am, xenl,
+ OTbs, am, xenl,
cols#39, lines#16,
bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
rmso=\EB, smso=\Eb,
+# From: Federico Bianchi <bianchi@www.arte.unipi.it>
+# These entries are for the Embeddable Linux Kernel System (ELKS)
+# project - an heavily stripped down Linux to be run on 16 bit
+# boxes or, eventually, to be used in embedded systems - and have been
+# adapted from the stock ELKS termcap. The project itself looks stalled,
+# and the latest improvements I know of date back to March 2000.
+#
+# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
+# as an added bonus, this deals with all the capabilities common to
+# both VT52 and ANSI (or, eventually, "special") modes.
+
+elks-glasstty|ELKS glass-TTY capabilities,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+ nel=^M^J,
+
+elks-vt52|ELKS vt52 console,
+ clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
+ home=\EH, use=elks-glasstty,
+
+elks-ansi|ELKS ANSI console,
+ clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ rmso=\E[m, smso=\E[7m, use=elks-glasstty,
+
+# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
+# instead of VT52, but the "elks" entry still refers to the latter.
+
+elks|default ELKS console,
+ use=elks-vt52,
+
+# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
+# one but in screen size
+
+sibo|ELKS SIBO console,
+ cols#61, it#8, lines#20, use=elks-vt52,
+
######## COMMERCIAL WORKSTATION CONSOLES
#
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- if=/usr/lib/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
+ if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, if=/usr/lib/tabset/vt100, kbs=^H,
+ home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
ansi-emx|ANSI.SYS color,
am, bce, eo, mir, msgr, xenl, xon,
- colors#16, cols#80, it#8, lines#25, pairs#64,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
tbc=\E[3g, u8=\E[?6c, u9=\E[c,
ansi-color-2-emx|ANSI.SYS color 2,
am, bce, eo, mir, msgr, xenl, xon,
- colors#16, cols#80, it#8, lines#25, pairs#64,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[0;37;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
tbc=\E[3g, u8=\E[?6c, u9=\E[c,
ansi-color-3-emx|ANSI.SYS color 3,
am, bce, eo, mir, msgr, xenl, xon,
- colors#16, cols#80, it#8, lines#25, pairs#64,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[0;37;40m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
# Use this for cygwin32 (tested with beta 19.1)
# underline is colored bright magenta
# shifted kf1-kf12 are kf11-kf22
-cygwin|ansi emulation for cygwin32,
+cygwinB19|ansi emulation for cygwin32,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
use=ansi.sys,
+# Use this for cygwin (tested with version 1.1.0).
+# I've combined pcansi and linux. Some values of course were different and
+# I've indicated which of these were and which I used.
+# Cheers, earnie_boyd@yahoo.com
+# several changes based on running with tack and comparing with older entry -TD
+cygwin|ansi emulation for Cygwin,
+ am, eo, in, msgr, xon,
+ colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub1=^H,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
+ rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmpch=\E[10m,
+ rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, u9=\E[c,
+ vpa=\E[%i%p1%dd,
+
# This entry fits the Windows NT console when the _POSIX_TERM environment
# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
altos2|alt2|altos-2|altos II,
cols#80, it#8, lines#24, xmc#0,
clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl=\E[M,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dim=\EGp, dl=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
+ dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
ind=^J, invis=\EG1,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
am, da, db, mir, xhp,
cols#128, it#8, lines#47, xmc#0,
cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>,
- ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, ht=^I, il1=\EL$<10*/>,
- ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@,
- rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB,
- smul=\E&dD, vpa=\E&a%dY$<6/>,
+ cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
+ dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
+ il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
+ rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
+ smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
gator-t|HP 9000 model 237 emulating extra-tall AAA,
lines#94, use=gator,
gator|HP 9000 model 237 emulating AAA,
adm36|LSI ADM36,
OTbs, OTpt,
OTkn#4,
- if=/usr/lib/tabset/vt100,
+ if=/usr/share/tabset/vt100,
is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
use=vt100,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
- cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[M,
+ cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
qvt103-w|qume qvt103 132 cols,
if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
- ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%,
+ ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
# without the beeper
# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
- nel=^M^J, rmacs=\E%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
+ nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
dl1=\ER$<2*/>, il1=\EE$<2*/>,
civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
- knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
+ knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
rmam=\E[=7l, rmxon=^N,
rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
rep=\E[%p2%db%p1%c, rev=\EG4,
rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
- rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
+ rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p1%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
+######## LCD DISPLAYS
+#
+
+#### Matrix Orbital
+# from: Eric Z. Ayers (eric@ale.org)
+#
+# Matrix Orbital 20x4 LCD display
+# Command Character is 0xFE (decimal 254, octal 376)
+#
+# On this device, cursor addressability isn't possible. The LCD expects:
+# 0xfe G <col> <row>
+# for cup: %p1 == row and %p2 is column
+#
+# This line:
+# cup=\376G%p2%c%p1%c
+# LOOKS like it will work, but sometimes only one of the two numbers is sent.
+# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
+#
+# Alas, there is no cursor upline capability on this display.
+#
+# These entries add some 'sanity stuff' to the clear function. That is, it
+# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
+# and turns off the cursor blinking and stuff like that.
+#
+# NOTE: calling 'beep' turns on the backlight (bell)
+# NOTE: calling 'flash' turns it on and back off (visual bell)
+#
+MtxOrb| Generic Matrix Orbital LCD display,
+ bel=\376B^A, clear=\376X\376C\376R\376K\376T,
+ cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
+ flash=\376B\001$<200>\376F, home=\376H,
+MtxOrb204| 20x4 Matrix Orbital LCD display,
+ cols#20, lines#4, use=MtxOrb,
+MtxOrb162| 16x2 Matrix Orbital LCD display,
+ cols#16, lines#2, use=MtxOrb,
+# The end
+
######## OLDER TERMINAL TYPES
#
# This section is devoted to older commercial terminal brands that are now
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
- is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@,
+ is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
att605-pc|ATT 605 in pc term mode,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
- dch1=\E[P, dl1=\E[M, ich1=\E[@, il=\E[L, il1=\E[L, kcbt=\E[Z,
+ dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
- kf37=^^$, kf38=^^%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
+ kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
kf8=^^x, kf9=^^y, khome=^H,
kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
- kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%, kf51=^^&,
+ kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
kf9=^^y,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
ts100-ctxt|falco ts-100 saving context,
kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
- smacs=\E%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
+ smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
vpa=\E[%p1%{32}%+%c, use=adm+sgr,
f100-rv|freedom-rv|freedom 100 in reverse video,
flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
op=\E[32m\E[40m,
setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
+ibm+16color|IBM aixterm color definitions,
+ colors#16, pairs#256,
+ setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+ setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+ setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
ibm5154|IBM 5154 Color display,
colors#8, ncv@, pairs#64,
bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
#
# AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
+# Note that we could use ibm+16color, but that is not how IBM defines this one.
aixterm|IBM Aixterm Terminal Emulator,
eslok, hs,
acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
cnorm=\E.3, cr=^M,
csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
- cuu1=^K, cvvis=\E.1, dch=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1,
- il1=\EE, invis=\E[1ZZ, is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ,
- nel=^_, rev=\E[4ZZ, rmir=\Er,
- rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
+ cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
+ hts=\E1, il1=\EE, invis=\E[1ZZ,
+ is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
+ rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
- rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%,
+ rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
smso=^V$\,,
intext2|intextii|INTERACTIVE modified owl 1251,
am, bw, ul,
ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
- nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0,
+ nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
#### Microdata/MDIS
bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
- el=\E[0K$<13>, ht=^I, il=\E[1L$<5*>, ind=\ED$<20*>,
+ el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
- sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
+ sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
smul=\E%!1\E[4m$<2>\E%!0,
# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
- kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH,
+ kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
aepro|Apple II+ running ASCII Express Pro--vt52,
OTbs,
mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
cols#132, use=mac,
+# The AppKit Terminal.app descriptions all have names beginning with
+# "nsterm". Note that the statusline (-s) versions use the window
+# titlebar as a phony status line, and may produce warnings during
+# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
+# these warnings, or even ignore these entries entirely. Apps which
+# need to position the cursor or do other fancy stuff inside the status
+# line won't work with these entries. They're primarily useful for
+# programs like Pine which provide simple notifications in the status
+# line. Please note that non-ASCII characters don't work right in the
+# status line, since Terminal.app incorrectly interprets their Unicode
+# codepoints as MacRoman codepoints.
+#
+# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
+# "nsterm" to comply with the name length and case conventions and
+# limitations of various software packages [notably Solaris terminfo
+# and UNIX.] A single Apple_Terminal alias is retained for
+# backwards-compatbility.
+#
+# * Added function key support (F1-F4). These only work in Terminal.app
+# version 51, hopefully the capabilities won't cause problems for people
+# using version 41.
+#
+# * Added "full color" (-c) entries which support the 16-color mode in
+# version 51.
+#
+# * By default, version 51 uses UTF-8 encoding with broken altcharset
+# support, so "ASCII" (-7) entries without altcharset support were
+# added.
+
+# nsterm - AppKit Terminal.app
+#
+# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
+# Terminal.app. It is a partial VT100 emulation with some xterm-like
+# extensions. This terminfo was written to describe versions 41
+# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
+# version 10.1) of Terminal.app.
+#
+# Terminal.app runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems.) On the Mac OS X machine I
+# use, the executable for Terminal.app is:
+# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
+#
+# If you're looking for a description of the full-screen system
+# console which runs under Apple's Darwin operating system on PowerPC
+# platforms, see the "xnuppc" entry instead.
+#
+# There were no function keys in version 41. In version 51, there are
+# four working function keys (F1, F2, F3 and F4.) The function keys
+# are included in all of these entries.
+#
+# It does not support mouse pointer position reporting. Under some
+# circumstances the cursor can be positioned using option-click; this
+# works by comparing the cursor position and the selected position,
+# and simulating enough cursor-key presses to move the cursor to the
+# selected position. This technique fails in all but the simplest
+# applications.
+#
+# It provides partial ANSI color support (background colors interacted
+# badly with bold in version 41, though, as reflected in :ncv:.) The
+# monochrome (-m) entries are useful if you've disabled color support
+# or use a monochrome monitor. The full color (-c) entries are useful
+# in version 51, which doesn't exhibit the background color bug. They
+# also enable an xterm-compatible 16-color mode.
+#
+# The configurable titlebar is set using xterm-compatible sequences;
+# it is used as a status bar in the statusline (-s) entries. Its width
+# depends on font sizes and window sizes, but 50 characters seems to
+# be the default for an 80x24 window.
+#
+# The MacRoman character encoding is used for some of the alternate
+# characters in the "MacRoman" entries; the "ASCII" (-7) entries
+# disable alternate character set support entirely, and the "VT100"
+# (-acs) entries rely instead on Terminal.app's own buggy VT100
+# graphics emulation, which seems to think the character encoding is
+# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
+# are useful in Terminal.app version 51, which supports UTF-8 and
+# other ASCII-compatible character encodings but does not correctly
+# implement VT100 graphics; once VT100 graphics are correctly
+# implemented in Terminal.app, the "VT100" (-acs) entries should be
+# usable in any ASCII-compatible character encoding [except perhaps
+# in UTF-8, where some experts argue for disallowing alternate
+# characters entirely.]
+#
+# Terminal.app reports "vt100" as the terminal type, but exports
+# several environment variables which may aid detection in a shell
+# profile (i.e. .profile or .login):
+#
+# TERM=vt100
+# TERM_PROGRAM=Apple_Terminal
+# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
+# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
+#
+# For example, the following Bourne shell script would detect the
+# correct terminal type:
+#
+# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
+# then
+# export TERM
+# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
+# then
+# TERM="nsterm"
+# else
+# TERM="nsterm-c-7"
+# fi
+# fi
+#
+# In a C shell derivative, this would be accomplished by:
+#
+# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
+# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
+# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
+# setenv TERM "nsterm"
+# else
+# setenv TERM "nsterm-c-7"
+# endif
+# endif
+# endif
+
+# The '+' entries are building blocks
+nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
+ am, bw, msgr, xenl, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\177, kc1=\EOp, kc3=\EOn,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
+ ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+ sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ u8=\E[?1;2c, u9=\E[c,
+
+nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smacs=^N, use=nsterm+7,
+
+nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
+ acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smacs=^N, use=nsterm+7,
+
+nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
+ hs,
+ wsl#50,
+ dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
+
+nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
+ op=\E[0m, use=ibm+16color,
+
+nsterm+c41|AppKit Terminal.app v41 color support,
+ colors#8, ncv#37, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+# These are different combinations of the building blocks
+
+# ASCII charset (-7)
+nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
+ use=nsterm+7,
+
+nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+7,
+
+nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
+ use=nsterm+c41, use=nsterm+7,
+
+nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
+ use=nsterm+c, use=nsterm+7,
+
+nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+7,
+
+nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+7,
+
+# VT100 alternate-charset (-acs)
+nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
+ use=nsterm+acs,
+
+nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+acs,
+
+nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
+ use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
+ use=nsterm+c, use=nsterm+acs,
+
+nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+acs,
+
+# MacRoman charset
+nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
+ use=nsterm+mac,
+
+nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+mac,
+
+nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
+ use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
+ use=nsterm+c, use=nsterm+mac,
+
+nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+
+# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
+#
+# On PowerPC platforms, Apple's Darwin operating system uses a
+# full-screen system console derived from a NetBSD framebuffer
+# console. It is an ANSI-style terminal, and is not really VT-100
+# compatible.
+#
+# Under Mac OS X, this is the system console driver used while in
+# single-user mode [reachable by holding down Command-S during the
+# boot process] and when logged in using console mode [reachable by
+# typing ">console" at the graphical login prompt.]
+#
+# If you're looking for a description of the Terminal.app terminal
+# emulator which runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems,) see the "nsterm"
+# entry instead.
+#
+# NOTE: Under Mac OS X version 10.1, the default login window does not
+# prompt for user name, instead requiring an icon to be selected from
+# a list of known users. Since the special ">console" login is not in
+# this list, you must make one of two changes in the Login Window
+# panel of the Login section of System Prefs to make the special
+# ">console" login accessible. The first option is to enable 'Show
+# "Other User" in list for network users', which will add a special
+# "Other..." icon to the graphical login panel. Selecting "Other..."
+# will present the regular graphical login prompt. The second option
+# is to change the 'Display Login Window as:' setting to 'Name and
+# password entry fields', which replaces the login panel with a
+# graphical login prompt.
+#
+# There are no function keys, at least not in Darwin 1.3.
+#
+# It has no mouse support.
+#
+# It has full ANSI color support, and color combines correctly with
+# all three supported attributes: bold, inverse-video and underline.
+# However, bold colored text is almost unreadable (bolding is
+# accomplished using shifting and or-ing, and looks smeared) so bold
+# has been excluded from the list of color-compatible attributes
+# [using (ncv)]. The monochrome entry (-m) is useful if you use a
+# monochrome monitor.
+#
+# There is one serious bug with this terminal emulation's color
+# support: repositioning the cursor onto a cell with non-matching
+# colors obliterates that cell's contents, replacing it with a blank
+# and displaying a colored cursor in the "current" colors. There is
+# no complete workaround at present [other than using the monochrome
+# (-m) entries,] but removing the (msgr) capability seemed to help.
+#
+# The "standout" chosen was simple reverse-video, although a colorful
+# standout might be more aesthetically pleasing. Similarly, the bold
+# chosen is the terminal's own smeared bold, although a simple
+# color-change might be more readable. The color-bold (-b) entries
+# uses magenta colored text for bolding instead. The fancy color (-f
+# and -f2) entries use color for bold, standout and underlined text
+# (underlined text is still underlined, though.)
+#
+# Apparently the terminal emulator does support a VT-100-style
+# alternate character set, but all the alternate character set
+# positions have been left blank in the font. For this reason, no
+# alternate character set capabilities have been included in this
+# description. The console driver appears to be ASCII-only, so (enacs)
+# has been excluded [although the VT-100 sequence does work.]
+#
+# The default Mac OS X and Darwin installation reports "vt100" as the
+# terminal type, and exports no helpful environment variables. To fix
+# this, change the "console" entry in /etc/ttys from "vt100" to
+# "xnuppc-WxH", where W and H are the character dimensions of your
+# console (see below.)
+#
+# The font used by the terminal emulator is apparently one originally
+# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
+# file includes descriptions for the following geometries:
+#
+# Pixels Characters Entry Name (append -m for monochrome)
+# -------------------------------------------------------------------
+# 640x400 80x25 xnuppc-80x25
+# 640x480 80x30 xnuppc-80x30
+# 720x480 90x30 xnuppc-90x30
+# 800x600 100x37 xnuppc-100x37
+# 896x600 112x37 xnuppc-112x37
+# 1024x640 128x40 xnuppc-128x40
+# 1024x768 128x48 xnuppc-128x48
+# 1152x768 144x48 xnuppc-144x48
+# 1280x1024 160x64 xnuppc-160x64
+# 1600x1024 200x64 xnuppc-200x64
+# 1600x1200 200x75 xnuppc-200x75
+# 2048x1536 256x96 xnuppc-256x96
+#
+# The basic "xnuppc" entry includes no size information, and the
+# emulator includes no reporting capability, so you'll be at the mercy
+# of the TTY device (which reports incorrectly on my hardware.) The
+# color-bold entries do not include size information.
+
+# The '+' entries are building blocks
+xnuppc+basic|Darwin PowerPC Console basic capabilities,
+ am, bce, mir, xenl,
+ it#8,
+ bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
+ ka3=\EOs, kb2=\EOr, kbs=\177, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, rev=\E[7m,
+ ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+
+xnuppc+c|Darwin PowerPC Console ANSI color support,
+ colors#8, ncv#32, pairs#64,
+ op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+xnuppc+b|Darwin PowerPC Console color-bold support,
+ ncv#32,
+ bold=\E[35m,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ use=xnuppc+basic,
+
+xnuppc+f|Darwin PowerPC Console fancy color support,
+ ncv#35,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%p3%t;7%;m,
+ smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
+
+xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
+ ncv#35,
+ bold=\E[33m,
+ sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%p3%t;7%;m,
+ smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
+
+# Building blocks for specific screen sizes
+xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
+ cols#80, lines#25,
+
+xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
+ cols#80, lines#30,
+
+xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
+ cols#90, lines#30,
+
+xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
+ cols#100, lines#37,
+
+xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
+ cols#112, lines#37,
+
+xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
+ cols#128, lines#40,
+
+xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
+ cols#128, lines#48,
+
+xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
+ cols#144, lines#48,
+
+xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
+ cols#160, lines#64,
+
+xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
+ cols#200, lines#64,
+
+xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
+ cols#200, lines#75,
+
+xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
+ cols#256, lines#96,
+
+# These are different combinations of the building blocks
+
+xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
+ use=xnuppc+basic,
+
+xnuppc|darwin|Darwin PowerPC Console (color),
+ use=xnuppc+c, use=xnuppc+basic,
+
+xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
+ use=xnuppc+b,
+
+xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
+ use=xnuppc+b, use=xnuppc+c,
+
+xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
+ use=xnuppc+f,
+
+xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
+ use=xnuppc+f, use=xnuppc+c,
+
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
+ use=xnuppc+f2,
+
+xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
+ use=xnuppc+f2, use=xnuppc+c,
+
+# Combinations for specific screen sizes
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
+ use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
+ use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
+ use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
+ use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
+ use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
+ use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
+ use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
+ use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
+ use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
+ use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
+ use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
+ use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
+ use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
+ use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
+ use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
+ use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
+ use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
+ use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
+ use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
+ use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
+ use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
+ use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
+ use=xnuppc+256x96, use=xnuppc+basic,
+
+xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
+ use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
+
#### Radio Shack/Tandy
#
acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
ind=\204, indn@, ri=\215, rin@, use=amiga-h,
+# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
+# requires use of appropriate preferences settings.
+amiga-vnc|Amiga using VNC console (black on light gray),
+ am, da, db, msgr, ndscr,
+ btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
+ bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
+ clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E8m,
+ is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
+ kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
+ kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
+ kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
+ kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
+ rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
+ setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
+ setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
+ sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
+ smso=\E[1m, smul=\E[4m,
+
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
- if=/usr/lib/tabset/vt100, il1=\E[L, ind=\ED,
+ if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
- home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=^J,
- ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
+ home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
+ is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
- mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM,
- rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
u6=\E[%i%d;%dR, u7=\E[6n,
kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
- rmacs=\E%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1,
- tbc=\E0, use=adm+sgr,
+ rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
+ smul=\EG1, tbc=\E0, use=adm+sgr,
#### Motorola
#
env230|envision230|envision 230 graphics terminal,
xenl@,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
use=vt100,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
- uc=\EG8%p1%c\EG0, use=adm+sgr,
+ uc=\EG8\EG0, use=adm+sgr,
teletec|Teletec Datascreen,
OTbs, am,
cols#80, lines#24,
# 2000/7/1
# * add Eterm (Michael Jennings)
#
+# 2000-07-18
+# * add amiga-vnc entry.
+#
+# 2000-08-12
+# * correct description of Top Gun Telnet.
+# * add kterm-color
+#
+# 2000-08-26
+# * add qansi* entries from QNX ftp site.
+#
+# 2000-09-16
+# * add Matrix Orbital entries by Eric Z. Ayers).
+# * add xterm-basic, xterm-sco entries, update related entries to XFree86
+# 4.0.1c -TD
+#
+# 2000-09-17
+# * add S0, E0 extensions to screen's entry -TD
+#
+# 2000-09-23
+# * several corrections based on tic's new parameter-checking code -TD
+# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
+# bracketing sequences that reset video attributes (\E8 would restore
+# them) -TD
+#
+# 2000-11-11
+# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
+#
+# 2000-12-16
+# * improved scoansi, based on SCO man-page, and testing console,
+# scoterm with tack -TD
+#
+# 2001-01-27
+# * modify kterm to use acsc via SCS controls.
+#
+# 2001-02-10
+# * screen 3.9.8 allows xterm mouse controls to pass-through
+#
+# 2001-03-11
+# * remove spurious "%|" from some xterm entries.
+#
+# 2001-03-31
+# * modify 'screen' khome/kend to match screen 3.09.08
+# * add examples of 'screen' customization (screen.xterm-xfree86,
+# screen.xterm-r6, screen.teraterm) -TD
+#
+# 2001-04-14
+# * correct definitions of shifted editing keys for xterm-xfree86 -TD
+# * add "Apple_Terminal" entries -Benjamin Sittler
+# * remove time-delays from "Apple_Terminal" entries -TD
+# * make sgr entries time-delays consistent with individual caps -TD
+#
+# 2001-05-05
+# * corrected/updated screen.xterm-xfree86
+#
+# 2001-05-19
+# * ELKS descriptions, from Federico Bianchi
+# * add u6 (CSR) to Eterm (Michael Jennings).
+#
+# 2001-07-21
+# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
+# tic which handles names no longer than 14 characters. Add
+# corresponding descriptions for the Darwin PowerPC console named
+# "xnuppc" -Benjamin Sittler
+#
+# 2001-09-01
+# * change kbs in mach entries to ^? (Marcus Brinkmann).
+#
+# 2001-11-17
+# * add "putty" entry -TD
+# * updated "Apple_Terminal" entries -Benjamin Sittler
+#
+# 2001-11-24
+# * add ms-vt100-color entry -TD
+# * add "konsole" entries -TD
+#
+# 2001-12-08
+# * update gnome entry to Redhat 7.2 -TD
+#
+# 2002-05-25
+# * add kf13-kf48 strings to cons25w -TD
+# * add pcvt25-color entry -TD
+# * changed a few /usr/lib/tabset -> /usr/share/tabset.
+# * improve some features of scoansi entry based on SCO's version -TD
+# * add scoansi-new entry corresponding to OpenServer 5.0.6
+#
+# 2002-06-15
+# * add kcbt to screen entry -TD
+#
+# 2002-06-22
+# * add rxvt-16color, ibm+16color, mvterm entries -TD
+#
+# 2002-09-28
+# * split out linux-basic entry, making linux-c inherit from that, and
+# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
+# the history of this console type -TD
+# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
+# r/g/b parameters of initc are in the range 0 to 1000 -TD
+#
+# 2002-1005
+# * minor fix for scale-factor of linux-c and linux-c-nc -TD
+#
# The following sets edit modes for GNU EMACS.
# Local Variables:
# fill-prefix:"\t"
projects / ncurses.git / blobdiff