# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.494 $
-# $Date: 2014/05/24 16:04:53 $
+# $Revision: 1.501 $
+# $Date: 2014/06/09 21:40:50 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
#
# In trying to get the function keys to work, I had to cobble my own
# terminfo.src entry, since the existing vt520 entry doesn't include most of
-# the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
+# the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
# I seem to get them all -Mike Gran
vt520ansi|Boundless VT520 ANSI,
use=ansi+rca, use=vt420f, use=vt220+keypad,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
- ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
- kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
- rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
- rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
- rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
- setaf=\E[3%p1%dm,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
+ memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
- sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
- smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J,
- use=ansi+pp, use=xterm+kbs, use=vt100+enq,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
+ smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
+ smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, E3=\E[3;J, use=ansi+pp, use=xterm+kbs,
+ use=vt100+enq,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
u7=\E[6n, vpa=\E[%i%p1%dd,
#### VWM
+# http://vwm.sourceforge.net/
#
-# vwmterm is a terminal emulator written for the VWM console window manager
-#
+# VWM 2.0.2 (2009-05-01)
+# vwmterm is a terminal emulator written for the VWM console window manager.
+# This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
vwmterm|(vwm term),
am, bce, ccc, mir, msgr, npc, xenl, xon,
colors#8, pairs#64,
use=xterm+256color, use=st,
#### TERMINATOR
-# http://software.jessies.org/terminator/
+# https://code.google.com/p/jessies/
# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
# Debian/current -TD (2011/8/20)
#
# S0 (str) Switch charset 'G0' to the specified charset.
# E0 (str) Switch charset 'G0' back to standard charset.
#
-# tested with screen 3.09.08
+# Initially tested with screen 3.09.08
+#
+# According to its manual page
+#
+# Screen is a full-screen window manager that multiplexes a physical
+# terminal between several processes (typically interactive shells). Each
+# virtual terminal provides the functions of a DEC VT100 terminal and, in
+# addition, several control functions from the ISO 6429 (ECMA 48, ANSI
+# X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
+# multiple character sets).
+#
+# However, there is a design error in its support for video highlights. The
+# program uses a table (rendlist) which equates the SGR codes to terminal
+# capabilities. That, and color-decoding are hardcoded in screen; its behavior
+# is modified only by the presence or absence of the corresponding capabilities.
+# Not by their values.
+#
+# If screen sets the TERMCAP variable, it uses hardcoded strings which
+# correspond to the rendlist table.
+#
+# The table gives this information:
+#
+# SGR capability
+# --- ---------
+# 1 bold
+# 2 dim
+# 3 standout
+# 4 underline
+# 5 blink
+# - (unused 6)
+# 7 reverse
+# - (unused 8-21)
+# 22 reset bold, standout and dim
+# 23 reset standout
+# 24 reset underline
+# 25 reset blink
+# - (unused 26)
+# 27 reset reverse
+#
+# ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
+# ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
+# Without some redesign of screen, it is not possible to extend the set of
+# capabilities. Substitution would be possible, e.g., sending italics in
+# place of underline.
+#
+# Because screen uses hard-coded parsing, it does not check if two capabilities
+# use the same value. For example, changing standout to be the same as any of
+# the other capabilities will confuse screen. Curses applications which use
+# sgr are not impacted (because that usually resets all capabilities before
+# setting any), but termcap applications do not use sgr -TD
screen|VT 100/ANSI X3.64 virtual terminal,
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
screen+fkeys|function-keys according to screen,
kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
khome=\E[1~, kslt@,
+
+# See explanation before "screen" entry. Cancel italics so that applications
+# do not assume screen supports the feature. Add this tweak to entries which
+# extend screen for terminals which do support italics.
+screen+italics|screen cannot support italics,
+ ritm@, sitm@,
#
# Here are a few customized entries which are useful -TD
#
bce@, bw,
invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
- E3@, use=screen+fkeys, use=xterm-new,
+ E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
screen.mrxvt|screen in mrxvt,
use=screen+fkeys, use=mrxvt,
screen.vte|screen in any VTE-based terminal,
- use=screen+fkeys, use=vte,
+ use=screen+italics, use=screen+fkeys, use=vte,
screen.gnome|screen in GNOME Terminal,
- use=screen+fkeys, use=gnome,
+ use=screen+italics, use=screen+fkeys, use=gnome,
screen.konsole|screen in KDE console window,
- use=screen+fkeys, use=konsole,
+ use=screen+italics, use=screen+fkeys, use=konsole,
# fix the backspace key
screen.linux|screen in linux console,
bw,
# defbce on
screen-bce.xterm-new|screen optimized for modern xterm,
bce,
- ech@, use=screen.xterm-new,
+ ech@, use=screen+italics, use=screen.xterm-new,
screen-bce.rxvt|screen optimized for rxvt,
bce,
ech@, use=screen.rxvt,
ech@, use=screen.mrxvt,
screen-bce.gnome|screen optimized for GNOME-Terminal,
bce,
- ech@, use=screen.gnome,
+ ech@, use=screen+italics, use=screen.gnome,
screen-bce.konsole|screen optimized for KDE console window,
bce,
- ech@, use=screen.konsole,
+ ech@, use=screen+italics, use=screen.konsole,
screen-bce.linux|screen optimized for linux console,
bce,
ech@, use=screen.linux,
#
# See
-# http://www.minix3.org/manpages/man4/console.4.html
+# http://www.minix3.org/manpages/html4/console.html
minix|minix console (v3),
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
# * correct ti924-8 which had confused padding versus octal escapes -TD
# * correct padding in sbi entry -TD
#
+# 2014-06-07
+# * update xterm-new to patch #305 -TD
+# + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
+# (italic). This was a long-ago typo in screen 3.1.1 which was
+# overlooked until a few terminal emulators implemented the feature -TD
+#
+# 2014-06-09
+# + revert the change to screen; see notes for why this did not work -TD
+# + cancel sitm/ritm for entries which extend "screen", to work around
+# screen's hardcoded behavior for SGR 3 -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff