# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.763 $
-# $Date: 2019/08/03 21:42:15 $
+# $Revision: 1.773 $
+# $Date: 2019/11/09 23:52:28 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
+#
+# Interestingly, the original version of this entry in 2009 used a documented
+# (but nonstandard) SGR 21, which was supported in the Linux console since 1992
+# as an equivalent for SGR 22. Long after (early 2018), someone modified the
+# console driver to make it ignore SGR 21 because the ECMA-48 standard
+# suggested a different use for that particular code.
linux-16color|linux console with 16 colors,
colors#16, ncv#42, pairs#0x100,
setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
- setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
+ setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
use=linux,
# bterm (bogl 0.1.18)
kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, rmacs=^O,
- rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
- rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
+ rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
- tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ecma+index,
+ tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
+ use=ecma+index,
#
qansi|QNX ansi with console writes,
daisy, xhpa, use=qansi-g,
# tracked under rdar://problem/7365108 and rdar://problem/7365134
# in Apple's bug reporter.
#
-# In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
+# In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
# defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
# vt52, vt100, vt102 and xterm.
nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
# TERM_PROGRAM_VERSION=309
-# Earlier reports state that these differences also apply to OS X 10.7 (Leopard),
+# Earlier reports state that these differences also apply to OS X 10.7 (Lion),
# TERM_PROGRAM_VERSION=303
nsterm-build309|Terminal.app in OS X 10.8,
use=xterm+256setaf, use=nsterm-bce,
use=xterm+kbs, use=vt100+enq,
xterm-old|antique xterm version,
use=xterm-r6,
+# The monochrome version began as a copy of "xtermm" (from Solaris), and was
+# initially part of the xterm sources (in XFree86). But "xterm" continued to
+# grow, while "xterm-mono" had none of the newer features. Additionally,
+# inheriting from "xtermm" runs into several problems, including different
+# function keys as well as the fact that the mouse support is not compatible.
+# This entry restores the original intent, intentionally not an alias to
+# simplify maintenance -TD
+xterm-mono|monochrome xterm,
+ use=xterm-r6,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ il=\E[%p1%dL, il1=\E[L, ind=\n,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
- ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
- is1=\E[?47l\E>\E[?1l,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
# st.suckless.org
st|stterm| simpleterm,
- use=st-0.7,
+ use=st-0.8,
+
+# Reviewed 0.8.2:
+# In tack,
+# there is some problem turning off line-drawing
+# shift+control function-keys do nothing; shift+control cursor keys work
+# the padding tests make the terminal non-functional.
+# In vttest,
+# SD/SU work
+# SL/SR/REP do not work
+# ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
+#
+# This entry discards the ccc/initc capabilities from st-0.7 because they
+# belong in st-256color.
+st-0.8|simpleterm 0.7,
+ dim=\E[2m, kcbt@, kent@, oc=\E]104\007,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
+ Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
+ kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
+ kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
+ kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
+ use=ecma+strikeout, use=st-0.6,
# Reviewed 0.7:
# dim is intermittent, sometimes works, sometimes does not
use=ecma+index,
st-16color|stterm-16color|simpleterm with 16-colors,
use=ibm+16color, use=st,
-# 256 colors "works", but when running xterm's test-scripts, some garbage is
-# shown in the titlebar.
+# Tested with st 0.8.2
+# The issue with the titlebar is fixed, though st is very slow.
+# In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
+# garbage is shown in the titlebar.
#
# terminal wants to use TERM=stterm-256color, but that is longer than 14
# characters, making the choice nonportable.
st-256color|stterm-256color|simpleterm with 256 colors,
- ccc@,
- initc@, oc@, use=xterm+256color, use=st,
+ use=xterm+256color, use=st,
#### TERMINATOR
# https://github.com/software-jessies-org/jessies/wiki/Terminator
kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m, rmul=\E[m,
- rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m,
+ rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
- use=ecma+index,
+ use=ansi+rep, use=ecma+index,
# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
att500|att513|AT&T 513 using page mode,
pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
\s%p2%s,
pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
rmul=\E[m,
%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h,
smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
# 01-07-88
# printer must be set to EMUL ANSI to accept ESC codes
mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
\s\s\s\s\s\s%;%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
- rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m,
+ rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
+ sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
- tsl=\E7\E[99;%i%p1%dx,
+ tsl=\E7\E[99;%i%p1%dx, use=ansi+rep,
# This entry was modified 3/13/90 by JWE.
# fixes include additions of <enacs>, correcting <rep>, and modification
pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
%<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
- rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h,
+ rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
+ sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
- swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=ansi+rep,
att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
lines#41, use=att730,
att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
- mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
+ mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m,
rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
\\,
rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
\\,
smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
aaa+rv|ann arbor ambassador in reverse video,
blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
- prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
- ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
- rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
- sc=\E7,
+ prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>,
+ rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u,
+ rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
\016%;$<1>,
sgr0=\E[m\016$<1>, smacs=\017$<1>,
smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
avt-rv-ns|concept avt in reverse video mode/no status line,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt-ns,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
- rmso=\E[m, rmul=\E[m,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m,
+ rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
%;%?%p7%t8;%;m,
sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces <csr> with the needed
# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
# + updated alacritty+common entry & notes -TD
# + use xterm+sl-twm for consistency -TD
#
+# 2019-09-22
+# + correct a comment -TD
+#
+# 2019-10-26
+# + modify linux-16color to accommodate Linux console driver change in
+# early 2018 (report by Dino Petrucci).
+#
+# 2019-11-02
+# + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
+#
+# 2019-11-09
+# + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
+# with old non-curses programs -TD
+# + reviewed st 0.8.2, updated some details -TD
+# + use ansi+rep several places -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!