# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.907 $
-# $Date: 2021/08/01 00:06:57 $
+# $Revision: 1.942 $
+# $Date: 2021/10/09 22:06:46 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# though undocumented. The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
-ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
+#
+# DOS 2.0 (January 1983) documented these features in
+# Chapter 13, "Using Extended Screen and Keyboard Control" -TD
+ansi.sys-old|ANSI.SYS under PC-DOS 2.0,
OTbs, am, mir, msgr, xon,
cols#80, lines#25,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
-tw100|toswin vt100 window mgr,
+tw100|Toswin vt100 window manager,
eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
smso=\Ep, smul=\EyH,
# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
-atari-old|atari st,
+atari-old|Atari st,
OTbs, am,
cols#80, it#8, lines#25,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
-linux-basic|linux console,
+linux-basic|Linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18, U8#1,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
-linux-c-nc|linux console with color-change,
+linux-c-nc|Linux console with color-change,
ccc,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
%02x%p4%{255}%*%{1000}%/%02x,
oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
-linux-c|linux console 1.3.6+ for older ncurses,
+linux-c|Linux console 1.3.6+ for older ncurses,
ccc,
initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
-linux2.2|linux 2.2.x console,
+linux2.2|Linux 2.2.x console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
#
# https://lwn.net/Articles/284767/
# "An interview with the new embedded maintainers"
-linux2.6|linux 2.6.x console,
+linux2.6|Linux 2.6.x console,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
yzz{{||}}~~,
enacs=\E)0, rmacs=^O,
# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
# It is the same as xterm's erase-saved-lines feature.
-linux3.0|linux 3.0 kernels,
- E3=\E[3J, use=linux2.6,
+#
+# Linux 3.0 was released in July 2011. The keyboard utilities (kbd) are
+# used for configuring its keyboard mappings.
+#
+# kbd 1.14 was released before that (January 2008), but due to its placement
+# late in the Linux 2.6.x series had no immediate effect for most users. That
+# provided a default mapping for shift-tab to the (misnamed) Meta_Tab, i.e.,
+# the same as Alt-Tab.
+#
+# The suggested mapping for the conventional \E[Z is provided in this entry as
+# an extended key to lessen user surprise -TD
+linux3.0|Linux 3.0 kernels,
+ kcbt=\E^I, E3=\E[3J, kcbt2=\E[Z, use=linux2.6,
# This is Linux console for ncurses.
-linux|linux console,
+linux|Linux console,
use=linux3.0,
# Subject: linux 2.6.26 vt back_color_erase
# apparently from
# http://lkml.org/lkml/2008/4/26/305
# http://lkml.org/lkml/2008/10/3/66
-linux2.6.26|linux console w/o bce,
+linux2.6.26|Linux console w/o bce,
bce@, use=linux2.6,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-linux-nic|linux with ich/ich1 suppressed for non-curses programs,
+linux-nic|Linux with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=linux,
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
-linux-koi8|linux with koi8 alternate character set,
+linux-koi8|Linux with koi8 alternate character set,
acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
\211w\210x\201y\230z\231{\267|\274~\224,
# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
-linux-koi8r|linux with koi8-r alternate character set,
+linux-koi8r|Linux with koi8-r alternate character set,
use=linux, use=klone+koi8acs,
# Entry for the latin1 and latin2 fonts
-linux-lat|linux with latin1 or latin2 alternate character set,
+linux-lat|Linux with latin1 or latin2 alternate character set,
acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
-linux-vt|linux console using VT codes for graphics,
+linux-vt|Linux console using VT codes for graphics,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
yzz~~,
rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
# For background, refer to the report on bug-ncurses:
#
# https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
-linux-16color|linux console with 16 colors,
+linux-16color|Linux console with 16 colors,
colors#16, ncv#42, pairs#0x100,
setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
#
# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
-mach|Mach Console,
+mach|Mach console,
am, km,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
smso=\E[7m, smul=\E[4m,
-mach-bold|Mach Console with bold instead of underline,
+mach-bold|Mach console with bold instead of underline,
rmul=\E[0m, smul=\E[1m, use=mach,
-mach-color|Mach Console with ANSI color,
+mach-color|Mach console with ANSI color,
colors#8, pairs#64,
dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
2%;%?%p6%t;1%;%?%p7%t;8%;m,
use=ecma+index, use=mach,
-mach-gnu-color|Mach Console with ANSI color,
+mach-gnu-color|Mach console with ANSI color,
colors#8, pairs#64,
op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, use=mach-gnu,
# optimization. Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
-qnx|qnx4|qnx console,
+qnx|qnx4|QNX console,
daisy, km, mir, msgr, xhpa, xt,
colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
# (TD: derive from original qnx4 entry)
-qnxt2|qnx 2.15 serial terminal,
+qnxt2|QNX 2.15 serial terminal,
am,
civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 80 columns
-pcvt25|dec vt220 emulation with 25 lines,
+pcvt25|DEC vt220 emulation with 25 lines,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
-pcvt28|dec vt220 emulation with 28 lines,
+pcvt28|DEC vt220 emulation with 28 lines,
cols#80, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
-pcvt35|dec vt220 emulation with 35 lines,
+pcvt35|DEC vt220 emulation with 35 lines,
cols#80, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
-pcvt40|dec vt220 emulation with 40 lines,
+pcvt40|DEC vt220 emulation with 40 lines,
cols#80, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
-pcvt43|dec vt220 emulation with 43 lines,
+pcvt43|DEC vt220 emulation with 43 lines,
cols#80, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
-pcvt50|dec vt220 emulation with 50 lines,
+pcvt50|DEC vt220 emulation with 50 lines,
cols#80, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 132 columns
-pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
+pcvt25w|DEC vt220 emulation with 25 lines and 132 cols,
cols#132, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
-pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
+pcvt28w|DEC vt220 emulation with 28 lines and 132 cols,
cols#132, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
-pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
+pcvt35w|DEC vt220 emulation with 35 lines and 132 cols,
cols#132, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
-pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
+pcvt40w|DEC vt220 emulation with 40 lines and 132 cols,
cols#132, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
-pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
+pcvt43w|DEC vt220 emulation with 43 lines and 132 cols,
cols#132, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
-pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
+pcvt50w|DEC vt220 emulation with 50 lines and 132 cols,
cols#132, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# OpenBSD implements a color variation
-pcvt25-color|dec vt220 emulation with 25 lines and color,
+pcvt25-color|DEC vt220 emulation with 25 lines and color,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
-cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
+cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode),
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
%p6%t;1%;m,
sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
-cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
+cons25|ansis|ansi80x25|FreeBSD console (25-line ansi mode),
acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
\371,
use=cons25w,
-cons25-debian|freebsd console with debian backspace (25-line ansi mode),
+cons25-debian|FreeBSD console with debian backspace (25-line ansi mode),
kbs=^?, kdch1=\E[3~, use=cons25,
-cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
+cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25,
-cons30|ansi80x30|freebsd console (30-line ansi mode),
+cons30|ansi80x30|FreeBSD console (30-line ansi mode),
lines#30, use=cons25,
-cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
+cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ansi mode),
lines#30, use=cons25-m,
-cons43|ansi80x43|freebsd console (43-line ansi mode),
+cons43|ansi80x43|FreeBSD console (43-line ansi mode),
lines#43, use=cons25,
-cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
+cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ansi mode),
lines#43, use=cons25-m,
-cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
+cons50|ansil|ansi80x50|FreeBSD console (50-line ansi mode),
lines#50, use=cons25,
-cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
+cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ansi mode),
lines#50, use=cons25-m,
-cons60|ansi80x60|freebsd console (60-line ansi mode),
+cons60|ansi80x60|FreeBSD console (60-line ansi mode),
lines#60, use=cons25,
-cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
+cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ansi mode),
lines#60, use=cons25-m,
-cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
+cons25r|pc3r|ibmpc3r|cons25-koi8-r|FreeBSD console w/koi8-r cyrillic,
acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
\225,
use=cons25w,
-cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
+cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|FreeBSD console w/koi8-r cyrillic (mono),
colors@, pairs@,
op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
%t;30;1%;%?%p6%t;1%;m,
smul=\E[4m, use=cons25r,
-cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
+cons50r|cons50-koi8r|FreeBSD console w/koi8-r cyrillic (50 lines),
lines#50, use=cons25r,
-cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
+cons50r-m|cons50-koi8r-m|FreeBSD console w/koi8-r cyrillic (50-line mono),
lines#50, use=cons25r-m,
-cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
+cons60r|cons60-koi8r|FreeBSD console w/koi8-r cyrillic (60 lines),
lines#60, use=cons25r,
-cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
+cons60r-m|cons60-koi8r-m|FreeBSD console w/koi8-r cyrillic (60-line mono),
lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
-cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
+cons25l1|cons25-iso8859|FreeBSD console w/iso 8859-1 chars,
acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
\226v\227w\230x\231y\232z\233~\237,
use=cons25w,
-cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
+cons25l1-m|cons25-iso-m|FreeBSD console w/iso 8859-1 chars (mono),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25l1,
-cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
+cons50l1|cons50-iso8859|FreeBSD console w/iso 8859-1 chars (50 lines),
lines#50, use=cons25l1,
-cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
+cons50l1-m|cons50-iso-m|FreeBSD console w/iso 8859-1 chars (50-line mono),
lines#50, use=cons25l1-m,
-cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
+cons60l1|cons60-iso|FreeBSD console w/iso 8859-1 chars (60 lines),
lines#60, use=cons25l1,
-cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
+cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
-origpc3|origibmpc3|IBM PC 386BSD Console,
+origpc3|origibmpc3|IBM PC 386BSD console,
OTbs, am, bw, eo, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
-oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
+oldpc3|oldibmpc3|old IBM PC BSD/386 console,
OTbs, km,
lines#25,
bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
-bsdos-pc|IBM PC BSD/OS Console,
+bsdos-pc|IBM PC BSD/OS console,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=bsdos-pc-nobold,
use=klone+sgr8,
# Old names for BSD/OS PC console used in releases before 4.1.
-pc3|BSD/OS on the PC Console,
+pc3|BSD/OS on the PC console,
use=bsdos-pc-nobold,
-ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
+ibmpc3|pc3-bold|BSD/OS on the PC console with bold instead of underline,
use=bsdos-pc,
# BSD/OS on the SPARC
-bsdos-sparc|Sun SPARC BSD/OS Console,
+bsdos-sparc|Sun SPARC BSD/OS console,
use=sun,
# BSD/OS on the PowerPC
-bsdos-ppc|PowerPC BSD/OS Console,
+bsdos-ppc|PowerPC BSD/OS console,
use=bsdos-pc,
# not be used as a guide to the capabilities of the vt52. Note in particular
# that vt52 does not support line-drawing characters (the scan-X values refer
# to a crude plotting feature) -TD
-vt52|dec vt52,
+vt52|DEC vt52,
OTbs,
it#8, lines#24,
acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
# terminfo guidelines. That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
-vt100+keypad|dec vt100 numeric keypad no fkeys,
+vt100+keypad|DEC vt100 numeric keypad no fkeys,
ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
-vt100+pfkeys|dec vt100 numeric keypad,
+vt100+pfkeys|DEC vt100 numeric keypad,
kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=vt100+keypad,
-vt100+fnkeys|dec vt100 numeric keypad,
+vt100+fnkeys|DEC vt100 numeric keypad,
kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
kf9=\EOw, use=vt100+pfkeys,
#
# | $Op | $On | |
# |___________________|_________|_kent_@8_|
#
-vt220+keypad|dec vt220 numeric keypad,
+vt220+keypad|DEC vt220 numeric keypad,
ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
kb3=\EOv, kc2=\EOr,
# INTERLACE_OFF
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
-vt100|vt100-am|dec vt100 (w/advanced video),
+vt100|vt100-am|DEC vt100 (w/advanced video),
OTbs, mc5i, xenl, xon,
vt#3,
csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
%;m%?%p9%t\016%e\017%;$<2>,
smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
use=vt100+4bsd, use=vt100+fnkeys,
-vt100+4bsd|dec vt100 from 4.0BSD,
+vt100+4bsd|DEC vt100 from 4.0BSD,
am, msgr,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
-vt100-vb|dec vt100 (w/advanced video) & no beep,
+vt100-vb|DEC vt100 (w/advanced video) & no beep,
bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
# Ordinary vt100 in 132 column ("wide") mode.
-vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
+vt100-w|vt100-w-am|DEC vt100 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
-vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
+vt100-w-nam|vt100-nam-w|DEC vt100 132 cols (w/advanced video no automargin),
cols#132, lines#14, vt@,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
xmc#1,
blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
smul@, use=vt100,
-vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
+vt100-nav-w|vt100-w-nav|DEC vt100 132 cols 14 lines (no advanced video option),
cols#132, lines#14, use=vt100-nav,
# vt100 with one of the 24 lines used as a status line.
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
-vt102|dec vt102,
+vt102|DEC vt102,
dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
use=vt100,
-vt102-w|dec vt102 in wide mode,
+vt102-w|DEC vt102 in wide mode,
cols#132,
rs3=\E[?3h, use=vt102,
# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
-vt131|dec vt131,
+vt131|DEC vt131,
OTbs, am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
use=ansi+pp, use=ansi+enq,
-vt220|vt200|dec vt220,
+vt220|vt200|DEC vt220,
use=vt220+cvis, use=vt220-base,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
-vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
+vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC vt220/200 in 8-bit mode,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
# added msgr -TD
-vt200-js|vt220-js|dec vt200 series with jump scroll,
+vt200-js|vt220-js|DEC vt200 series with jump scroll,
am, msgr,
cols#80,
bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
-vt320|vt300|dec vt320 7 bit terminal,
+vt320|vt300|DEC vt320 7 bit terminal,
am, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl,
use=ansi+enq,
-vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
+vt320-nam|vt300-nam|DEC vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
# We have to init 132-col mode, not 80-col mode.
-vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
+vt320-w|vt300-w|DEC vt320 wide 7 bit terminal,
cols#132, wsl#132,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
-vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
+vt320-w-nam|vt300-w-nam|DEC vt320 wide 7 bit terminal with no am,
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
-vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
+vt340|dec-vt340|vt330|dec-vt330|DEC vt340 graphics terminal with 24 line page,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# Left/right margins are supported in xterm since patch #279 (2012/05/10)
vt420+lrmm|VT420 left/right margins,
- mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,
+ mgc=\E[?69l, smglp=\E[?69h\E[%i%p1%ds,
+ smglr=\E[?69h\E[%i%p1%d;%p2%ds,
+ smgrp=\E[?69h\E[%i;%p1%ds,
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
-vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
+vt400|vt400-24|dec-vt400|DEC vt400 24x80 column autowrap,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=vt220+vtedit, use=ansi+pp, use=dec+sl, use=ansi+enq,
- use=vt220+cvis,
+ use=vt220+cvis, use=vt420+lrmm,
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
-z340|zstem vt340 terminal emulator 132col 42line,
+z340|ZSTEM vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
-z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
+z340-nam|ZSTEM vt340 terminal emulator 132col 42line (no automatic margins),
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
# color-bold entries do not include size information.
# The '+' entries are building blocks
-xnuppc+basic|Darwin PowerPC Console basic capabilities,
+xnuppc+basic|Darwin PowerPC console basic capabilities,
am, bce, mir, xenl,
it#8,
bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
-xnuppc+c|Darwin PowerPC Console ANSI color support,
+xnuppc+c|Darwin PowerPC console ANSI color support,
colors#8, ncv#32, pairs#64,
op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-xnuppc+b|Darwin PowerPC Console color-bold support,
+xnuppc+b|Darwin PowerPC console color-bold support,
ncv#32,
bold=\E[35m,
sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
use=xnuppc+basic,
-xnuppc+f|Darwin PowerPC Console fancy color support,
+xnuppc+f|Darwin PowerPC console fancy color support,
ncv#35,
sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
m,
smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
-xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
+xnuppc+f2|Darwin PowerPC console alternate fancy color support,
ncv#35,
bold=\E[33m,
sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
# Building blocks for specific screen sizes
-xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
+xnuppc+80x25|Darwin PowerPC console 80x25 support (640x400 pixels),
cols#80, lines#25,
-xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
+xnuppc+80x30|Darwin PowerPC console 80x30 support (640x480 pixels),
cols#80, lines#30,
-xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
+xnuppc+90x30|Darwin PowerPC console 90x30 support (720x480 pixels),
cols#90, lines#30,
-xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
+xnuppc+100x37|Darwin PowerPC console 100x37 support (800x600 pixels),
cols#100, lines#37,
-xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
+xnuppc+112x37|Darwin PowerPC console 112x37 support (896x600 pixels),
cols#112, lines#37,
-xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
+xnuppc+128x40|Darwin PowerPC console 128x40 support (1024x640 pixels),
cols#128, lines#40,
-xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
+xnuppc+128x48|Darwin PowerPC console 128x48 support (1024x768 pixels),
cols#128, lines#48,
-xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
+xnuppc+144x48|Darwin PowerPC console 144x48 support (1152x768 pixels),
cols#144, lines#48,
-xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
+xnuppc+160x64|Darwin PowerPC console 160x64 support (1280x1024 pixels),
cols#160, lines#64,
-xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
+xnuppc+200x64|Darwin PowerPC console 200x64 support (1600x1024 pixels),
cols#200, lines#64,
-xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
+xnuppc+200x75|Darwin PowerPC console 200x75 support (1600x1200 pixels),
cols#200, lines#75,
-xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
+xnuppc+256x96|Darwin PowerPC console 256x96 support (2048x1536 pixels),
cols#0x100, lines#96,
# These are different combinations of the building blocks
-xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
+xnuppc-m|darwin-m|Darwin PowerPC console (monochrome),
use=xnuppc+basic,
-xnuppc|darwin|Darwin PowerPC Console (color),
+xnuppc|darwin|Darwin PowerPC console (color),
use=xnuppc+c, use=xnuppc+basic,
-xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
+xnuppc-m-b|darwin-m-b|Darwin PowerPC console (monochrome w/color-bold),
use=xnuppc+b,
-xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
+xnuppc-b|darwin-b|Darwin PowerPC console (color w/color-bold),
use=xnuppc+b, use=xnuppc+c,
-xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
+xnuppc-m-f|darwin-m-f|Darwin PowerPC console (fancy monochrome),
use=xnuppc+f,
-xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
+xnuppc-f|darwin-f|Darwin PowerPC console (fancy color),
use=xnuppc+f, use=xnuppc+c,
-xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC console (alternate fancy monochrome),
use=xnuppc+f2,
-xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
+xnuppc-f2|darwin-f2|Darwin PowerPC console (alternate fancy color),
use=xnuppc+f2, use=xnuppc+c,
# Combinations for specific screen sizes
-xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC console (monochrome) 80x25,
use=xnuppc+80x25, use=xnuppc+basic,
-xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
+xnuppc-80x25|darwin-80x25|Darwin PowerPC console (color) 80x25,
use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
-xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC console (monochrome) 80x30,
use=xnuppc+80x30, use=xnuppc+basic,
-xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
+xnuppc-80x30|darwin-80x30|Darwin PowerPC console (color) 80x30,
use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
-xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC console (monochrome) 90x30,
use=xnuppc+90x30, use=xnuppc+basic,
-xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
+xnuppc-90x30|darwin-90x30|Darwin PowerPC console (color) 90x30,
use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
-xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC console (monochrome) 100x37,
use=xnuppc+100x37, use=xnuppc+basic,
-xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
+xnuppc-100x37|darwin-100x37|Darwin PowerPC console (color) 100x37,
use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
-xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC console (monochrome) 112x37,
use=xnuppc+112x37, use=xnuppc+basic,
-xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
+xnuppc-112x37|darwin-112x37|Darwin PowerPC console (color) 112x37,
use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
-xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC console (monochrome) 128x40,
use=xnuppc+128x40, use=xnuppc+basic,
-xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
+xnuppc-128x40|darwin-128x40|Darwin PowerPC console (color) 128x40,
use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
-xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC console (monochrome) 128x48,
use=xnuppc+128x48, use=xnuppc+basic,
-xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
+xnuppc-128x48|darwin-128x48|Darwin PowerPC console (color) 128x48,
use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
-xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC console (monochrome) 144x48,
use=xnuppc+144x48, use=xnuppc+basic,
-xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
+xnuppc-144x48|darwin-144x48|Darwin PowerPC console (color) 144x48,
use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
-xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC console (monochrome) 160x64,
use=xnuppc+160x64, use=xnuppc+basic,
-xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
+xnuppc-160x64|darwin-160x64|Darwin PowerPC console (color) 160x64,
use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
-xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC console (monochrome) 200x64,
use=xnuppc+200x64, use=xnuppc+basic,
-xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
+xnuppc-200x64|darwin-200x64|Darwin PowerPC console (color) 200x64,
use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
-xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC console (monochrome) 200x75,
use=xnuppc+200x75, use=xnuppc+basic,
-xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
+xnuppc-200x75|darwin-200x75|Darwin PowerPC console (color) 200x75,
use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
-xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC console (monochrome) 256x96,
use=xnuppc+256x96, use=xnuppc+basic,
-xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
+xnuppc-256x96|darwin-256x96|Darwin PowerPC console (color) 256x96,
use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
######## DOS/WINDOWS
# Double-size characters
# Xterm extensions for mouse support
# Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi,
-# ANSIBBS, WYSE60, Televideo 950.
+# ANSIBBS, WYSE60, TeleVideo 950.
#
# Default:
# TERM=xterm
# but that is not unusual for vt100 "emulators".
# b) Does not implement vt100 keypad
# c) Recognizes a subset of vt52 controls.
-ms-vt100|MS telnet imitating dec vt100,
+ms-vt100|MS telnet imitating DEC vt100,
lines#25,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
# the hardware terminals, or for more recent emulators, e.g., xterm.
vt220+cvis|DECTCEM VT220 cursor-visibility,
civis=\E[?25l, cnorm=\E[?25h,
-vt220+cvis8|8-bit variant,
+vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility,
civis=\233?25l, cnorm=\233?25h,
# The cvvis capability was unused in the SVr4 terminal descriptions for the
# AT&T terminals, and there are no available documents as of 2021 which can
# provide that it would have worked. The first block is used for those 1980s
# terminals; the second is used for terminals whose behavior can be verified.
-att610+cvis0|ATT 610 cursor-visibility,
+att610+cvis0|AT&T 610 cursor-visibility,
civis=\E[?25l, cnorm=\E[?25h\E[?12l,
att610+cvis|xterm cursor-visibility in XFree86 4.4,
civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
xterm+pcfkeys|fragment for PC-style fkeys,
use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
use=xterm+pce2,
-#
+
+# The xterm ctrlFKeys resource defaults to 10, so without the "pc-style"
+# feature, e.g., setting the modifyCursorKeys and modifyFunctionKeys resources
+# to -1 to disable them, one gets 42 function-keys on a 12-function-key
+# keyboard, e.g.,
+# kf1 = \E[11~
+# kf11 shift f1 = \E[23~
+# kf21 control f1 = \E[42~
+# kf31 shift control f1 = \E[52~
+xterm+nopcfkeys|fragment without PC-style fkeys,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~,
+ kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~,
+ kf28=\E[49~, kf29=\E[50~, kf3=\E[13~, kf30=\E[51~,
+ kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~,
+ kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~,
+ kf39=\E[60~, kf4=\E[14~, kf40=\E[61~, kf41=\E[62~,
+ kf42=\E[63~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~,
+
xterm+noapp|fragment with cursor keys in normal mode,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
khome=\E[H,
# | NumLock | / | * | - |
# | | $Oo | $Oj | $OS |
# |_________|__kpDIV__|__kpMUL__|__kpSUB__|
-# | 7 8 9 | |
-# | $Ow | $Ox | $Oy | + |
-# |_ka1__K1_|_________|_ka3__K3_| $Ok |
-# | 4 | 5 | 6 | kpADD |
+# | 7 8 9 | + |
+# | $Ow | $Ox | $Oy | $Ok |
+# |_ka1__K1_|_________|_ka3__K3_| kpADD |
+# | 4 | 5 | 6 | |
# | $Ot | $Ou | $Ov | |
# |_________|_kb2__K2_|_________|_________|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | |
# |_kc1__K4_|_________|_kc3__K5_| enter |
-# | 0 | . | $OM |
-# | $Op | $On | |
-# |___________________|_________|_kent_@8_|
+# | 0 | . | $OM |
+# | $Op | $On | |
+# |_______kpZRO_______|__kpDOT__|_kent_@8_|
+#
+# ka2, kb1, kb3 and kc2 are extensions, as are the mixed-case names.
+# There are no termcap equivalents for these extensions.
+#
+# kpCMA (comma) is used here for the VT100 keypad, which xterm emulates with
+# shifted-keypad-plus, though normally that invokes a font-size change.
+#
+# Old versions of xterm, e.g., xterm-xfree86, documented \EOE as kb2, which
+# does not fit into this layout. The extension kp5 fits, but is not visible
+# to termcap applications. As an alternative, kbeg (which does have a termcap
+# equivalent) is provided.
#
xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
- kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, kpDOT=\EOn,
- kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, use=vt220+keypad,
+ kbeg=\EOE, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo,
+ kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp,
+ use=vt220+keypad,
#
# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
# Alternatively, the same scheme with old-style function keys as in xterm-r6
setb@, setf@,
konsole-direct|konsole with direct-color indexing,
use=xterm+indirect, use=konsole,
-st-direct|st with direct-color indexing,
+st-direct|simpleterm with direct-color indexing,
use=xterm+indirect, use=st,
-vte-direct|vte with direct-color indexing,
+vte-direct|VTE with direct-color indexing,
use=xterm+indirect, use=vte,
# reportedly in Apple's Mohave (fall 2018), but untested -TD
nsterm-direct|nsterm with direct-color indexing,
xterm+direct16|xterm with direct-color indexing,
CO#16,
- setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%e48:2
- ::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48
+ :2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&
+ %d%;%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%d%e38:
+ 2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
%;%;m,
- setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%e38:2:
- :%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d%;
- %;m,
setb@, setf@, use=xterm+direct,
xterm-direct16|xterm with direct-colors and 16 indexed colors,
u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
vpa=\233%i%p1%dd, use=xterm+kbs,
+# Note: normally xterm supports modified function-keys as described in
+# XTerm - "Other" modified keys
+# https://invisible-island.net/xterm/modified-keys.html
+#
+# However, xterm-hp, xterm-sco and xterm-sun assume no modifiers. Here is
+# a simple script which demonstrates these descriptions:
+# #!/bin/sh
+# export TERM=xterm-$1
+# xterm \
+# -kt $1 \
+# -fs 16 -fa mono \
+# -title $TERM \
+# -tn $TERM \
+# -xrm '*modifyCursorKeys:-1' \
+# -xrm '*modifyFunctionKeys:-1' \
+# -e tack
+# e.g., "foo sun" if the script is named "foo" -TD
xterm-hp|xterm with hpterm function keys,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
- kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
- knp=\ES, kpp=\ET, use=xterm+nofkeys,
+ kdch1=\EP, kend=\EF, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET,
+ use=hp+pfk-cr, use=xterm+nofkeys, use=xterm+nopcfkeys,
xterm-sco|xterm with SCO function keys,
kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
use=xterm+sm+1006, use=xterm+tmux, use=xterm+keypad,
use=xterm-basic,
-xterm-vt52|xterm emulating dec vt52,
+xterm-vt52|xterm emulating DEC vt52,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
- use=xterm+nofkeys,
+ use=xterm+nofkeys, use=xterm+nopcfkeys,
xterms-sun|small (80x24) xterm with sunFunctionKeys true,
cols#80, lines#24, use=xterm-sun,
#
# As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
# "solaris").
-konsole-linux|KDE console window with linux keyboard,
+konsole-linux|KDE console window with Linux keyboard,
kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
-hpterm|X-hpterm|hp X11 terminal emulator,
+hpterm|X-hpterm|HP X11 terminal emulator,
am, da, db, mir, xhp, xon,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
- kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
- kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
- knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
- memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+ kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
+ khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, krmir=\ER,
+ ktbc=\E3, meml=\El, memu=\Em,
+ pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
- vpa=\E&a%p1%dY,
+ vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
# HPUX 11 provides a color version.
hpterm-color|HP X11 terminal emulator with color,
ccc,
#
# This version, which came from Martin Trusler, was tested with lynx using
# ncurses 5.4
-hpterm-color2|X-hpterm-color2|hp X11 terminal emulator with color,
+hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color,
OTbs, am, ccc, da, db, km, mir, xhp,
colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
pairs#8, xmc#0,
%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
%t1%e.%p7%d%;z%p1%dI,
- is1=\EH\EJ, kbs=^H, kctab=\E2, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
- kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
- kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES,
- kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3,
- meml=\El, memu=\Em,
+ is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
+ kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV,
+ krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
I\E&v1b1c6I\E&v1x1y7I,
op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
- smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=hp+pfk-cr,
+ use=hp+arrows,
#### EMU
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# It corresponds to emu's internal emulation:
# - shifted cursor-keys send sequences like rxvt
# - sgr referred to unimplemented "invis" mode.
# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
-simpleterm|old-st| simpleterm 0.1.1,
+simpleterm|old-st|simpleterm 0.1.1,
am, eo, mir, msgr, ul, xenl,
colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, vpa=\E[%i%p1%dd,
+ smul=\E[4m, tbc=\E[3g, tsl=\E]2;, vpa=\E[%i%p1%dd,
use=vt220+pcedit, use=ecma+italics, use=ecma+index,
use=xterm+256setaf, use=xterm+sl-twm,
use=xterm+alt1049, use=vt220+cvis,
use=xterm+x11mouse, use=screen+italics,
use=screen+fkeys, use=konsole,
# fix the backspace key
-screen.linux|screen.linux-s|screen in linux console,
+screen.linux|screen.linux-s|screen in Linux console,
bw,
kbs=^?, kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
use=screen+fkeys, use=screen4,
screen-bce.konsole|screen optimized for KDE console window,
bce,
ech@, use=screen+italics, use=screen.konsole,
-screen-bce.linux|screen optimized for linux console,
+screen-bce.linux|screen optimized for Linux console,
bce,
ech@, use=screen.linux,
# See the note on Iris extensions near the end of this file.
# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
# <flash> from BRL -- esr)
-wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
+wsiris|iris40|IRIS emulating a 40 line Visual 50 (approximately),
OTbs, OTnc, OTpt, am,
OTkn#3, cols#80, it#8, lines#40,
OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
#
# (news-unk: this had :KB=news: -- esr)
-news-unk|SONY NEWS vt100 emulator common entry,
+news-unk|Sony NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80,
OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (news-29: this had :TY=ascii: --esr)
-news-29|SONY NEWS vt100 emulator with 29 lines,
+news-29|Sony NEWS vt100 emulator with 29 lines,
lines#29, use=news-unk,
# (news-29-euc: this had :TY=euc: --esr)
-news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
+news-29-euc|Sony NEWS vt100 emulator with 29 lines and EUC,
use=news-29,
# (news-29-sjis: this had :TY=sjis: --esr)
-news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
+news-29-sjis|Sony NEWS vt100 emulator with 29 lines and SJIS,
use=news-29,
#
# (news-33: this had :TY=ascii: --esr)
-news-33|SONY NEWS vt100 with 33 lines,
+news-33|Sony NEWS vt100 with 33 lines,
lines#33, use=news-unk,
# (news-33-euc: this had :TY=euc: --esr)
-news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
+news-33-euc|Sony NEWS vt100 with 33 lines and EUC,
use=news-33,
# (news-33-sjis: this had :TY=sjis: --esr)
-news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
+news-33-sjis|Sony NEWS vt100 with 33 lines and SJIS,
use=news-33,
#
# (news-42: this had :TY=ascii: --esr)
-news-42|SONY NEWS vt100 with 42 lines,
+news-42|Sony NEWS vt100 with 42 lines,
lines#42, use=news-unk,
# (news-42-euc: this had :TY=euc: --esr)
-news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
+news-42-euc|Sony NEWS vt100 with 42 lines and EUC,
use=news-42,
# (news-42-sjis: this had :TY=sjis: --esr)
-news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
+news-42-sjis|Sony NEWS vt100 with 42 lines and SJIS,
use=news-42,
#
# NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
-news-old-unk|SONY NEWS vt100 emulator common entry,
+news-old-unk|Sony NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80, vt#3,
OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
-nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
+nwp512|news|nwp514|news40|vt100-bm|old Sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
use=news-old-unk,
#
# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
-nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
+nwp512-a|nwp514-a|news-a|news42|news40-a|Sony vt100 emulator 42 line,
lines#42,
is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
use=news-old-unk,
#
# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
-nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
+nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|Sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
use=news-old-unk,
#
# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
-nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
+nwp513|nwp518|nwe501|newscbm|news31|Sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
#
# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
# also the alias vt100-bm.
-nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old Sony vt100 emulator 33 lines,
OTbs,
lines#33,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
use=news-old-unk,
#
# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
-nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
use=news-old-unk,
#
# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
-news28|sony vt100 emulator 28 lines,
+news28|Sony vt100 emulator 28 lines,
OTbs,
lines#28,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
use=news-old-unk,
#
# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
-news29|news28-a|sony vt100 emulator 29 lines,
+news29|news28-a|Sony vt100 emulator 29 lines,
lines#29,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
r\E8,
sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
use=vt220+pcedit, use=ecma+index,
-djgpp203|Entry for DJGPP 2.03,
+djgpp203|entry for DJGPP 2.03,
OTbs, am,
cols#80, it#8, lines#25,
bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
kcud1=\n, nel=\r\n,
-djgpp204|Entry for DJGPP 2.04,
+djgpp204|entry for DJGPP 2.04,
OTbs, am, AX,
colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. Also,
# :sr: was given as a boolean-- esr)
-altos2|alt2|altos-2|altos II,
+altos2|alt2|altos-2|Altos II,
cols#80, it#8, lines#24, xmc#0,
clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
-altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
+altos3|altos5|alt3|alt5|altos-3|altos-5|Altos III or V,
blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
-altos4|alt4|altos-4|altos IV,
+altos4|alt4|altos-4|Altos IV,
use=wy50,
# (altos7: had extension capabilities:
# :GG#0:GI=\EH8:GF=\EH7:\
# shift keys. I have renamed them to keys 32 and up accordingly. I have
# also made this entry relative to adm12 in order to give it an <sgr>. The
# <invis> imported by use=adm+sgr may work, let me know. -- esr)
-altos7|alt7|altos VII,
+altos7|alt7|Altos VII,
am, mir,
cols#80, lines#24, xmc#0,
acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt,
kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
rmir=\Er, smir=\Eq, use=adm+sgr,
-altos7pc|alt7pc|altos PC VII,
+altos7pc|alt7pc|Altos PC VII,
kend=\ET, use=altos7,
#### Hewlett-Packard (hp)
#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
-hpgeneric|hp|hewlett-packard generic terminal,
+hpgeneric|hp|Hewlett-Packard generic terminal,
OTbs, OTpt, am, da, db, mir, xhp,
cols#80, lines#24, lm#0, vt#6,
bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
-hp110|hewlett-packard model 110 portable,
+hp110|Hewlett-Packard model 110 portable,
lines#16, use=hpgeneric,
-hp+pfk+cr|hp function keys with CR,
+hp+pfk+cr|HP function keys with CR,
kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
-hp+pfk-cr|hp function keys w/o CR,
+hp+pfk-cr|HP function keys w/o CR,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
kf8=\Ew,
# but not separate escape sequences. These definitions allow the
# user to use those keys as arrow keys rather than as function
# keys.
-hp+pfk+arrows|hp alternate arrow definitions,
+hp+pfk+arrows|HP alternate arrow definitions,
kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
kll=\Eq\r, kri=\Es\r,
-hp+arrows|hp arrow definitions,
+hp+arrows|HP arrow definitions,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ES, kll=\EF, kri=\ET,
# Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
-hp2621-ba|2621 w/new rom and strap A set,
+hp2621-ba|HP 2621 w/new rom and strap A set,
rmkx@, smkx@, use=hp+arrows, use=hp2621,
# hp2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
-hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
+hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|HP 2621 w/labels,
is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
-hp2621-fl|hp 2621,
+hp2621-fl|HP 2621,
xhp@, xon,
pb#19200,
cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
use=hp+pfk+cr, use=hpgeneric,
# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
-hp2621p|hp 2621 with printer,
+hp2621p|HP 2621 with printer,
mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
hp2621p-a|hp2621p with fn as arrows,
use=hp+pfk+arrows, use=hp2621p,
# hp2621 with k45 keyboard
-hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
+hp2621-k45|hp2621k45|k45|HP 2621 with 45 keyboard,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
# 2621 using all 48 lines of memory, only 24 visible at any time.
-hp2621-48|48 line 2621,
+hp2621-48|HP 48 line 2621,
lines#48,
cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
use=hp2621,
# 2621 with no labels ever. Also prevents vi delays on escape.
-hp2621-nl|hp 2621 with no labels,
+hp2621-nl|HP 2621 with no labels,
kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
-hp2621-nt|hp 2621 w/no tabs,
+hp2621-nt|HP 2621 w/no tabs,
ht@, use=hp2621,
# Hp 2624 B with 4 or 10 pages of memory.
#
# The padding probably should be changed.
#
-hp2626|hp2626a|hp2626p|hp 2626,
+hp2626|hp2626a|hp2626p|HP 2626,
da, db,
lm#0, pb#19200,
ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
#
-hp2626-s|hp 2626 using only 23 lines,
+hp2626-s|HP 2626 using only 23 lines,
eslok, hs,
lines#23,
fsl=\E&d@\E&w7f2p1I\E&w4f1I,
\s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
# Force terminal back to 24 lines after being 23.
-hp2626-ns|hp 2626 using all 24 lines,
+hp2626-ns|HP 2626 using all 24 lines,
is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
\s\E&w3f2I\s\E&w7f2p1I\s\r,
use=hp2626,
# Various entries useful for small windows on 2626.
-hp2626-12|hewlett-packard 2626 12 lines,
+hp2626-12|Hewlett-Packard 2626 12 lines,
lines#12, use=hp2626,
-hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
+hp2626-12x40|Hewlett-Packard 2626 12 lines 40 columns,
cols#40, lines#12, use=hp2626,
-hp2626-x40|hewlett-packard 2626 40 columns,
+hp2626-x40|Hewlett-Packard 2626 40 columns,
cols#40, use=hp2626,
-hp2626-12-s|hewlett-packard 2626 11 lines plus status,
+hp2626-12-s|Hewlett-Packard 2626 11 lines plus status,
lines#11, use=hp2626-s,
#
# hp2627 color tubes from University of Wisconsin
#
-hp2627a-rev|hp 2627 with reverse video colors,
+hp2627a-rev|HP 2627 with reverse video colors,
cr=\r, cud1=\n, ht=^I, ind=\n,
is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
\r,
kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
smul=\E&dD\E&v1S, use=hp2621-nl,
-hp2627a|hp 2627 color terminal with no labels,
+hp2627a|HP 2627 color terminal with no labels,
cr=\r, cud1=\n, ht=^I, ind=\n,
is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
use=hp2621-nl,
-hp2627c|hp 2627 color (cyan) terminal with no labels,
+hp2627c|HP 2627 color (cyan) terminal with no labels,
cr=\r, cud1=\n, ht=^I, ind=\n,
is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
# hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
-hp2640a|hp 2640a,
+hp2640a|HP 2640a,
cup@, rmkx@, smkx@, use=hp2645,
-hp2640b|hp2644a|hp 264x series,
+hp2640b|hp2644a|HP 264x series,
rmkx@, smkx@, use=hp2645,
# (hp2641a: removed unknown :gu: -- esr)
# The HP 150 terminal is a fairly vanilla HP terminal, with the
# clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
-hp150|hewlett packard Model 150,
+hp150|Hewlett Packard Model 150,
OTbs, use=hp2622,
# HP 2382a terminals, "the little ones." They don't have any
# alternate character set support and sending out ^N/^O will
# leave the screen blank.
-hp2382a|hp2382|hewlett packard 2382a,
+hp2382a|hp2382|Hewlett Packard 2382a,
da, db,
lh#1, lm#48,
acsc@,
kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
use=hp+pfk-cr,
-newhp|generic entry for new hewlett packard terminals,
+newhp|generic entry for new Hewlett Packard terminals,
am, bw, mir, xhp, xon,
cols#80, lines#24, pb#4800,
acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn
# new 262x series of machines. It has dip-switched options.
# The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
-hp2621b|hp 2621b with old style keyboard,
+hp2621b|HP 2621b with old style keyboard,
lh#1, lm#48, lw#8, nlab#8,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ET, kll=\EF, kri=\ES,
%;%p2%s\E%{111}%p1%+%c\r,
smln=\E&jB, use=hp2621,
-hp2621b-p|hp 2621b with printer,
+hp2621b-p|HP 2621b with printer,
use=hp+printer, use=hp2621b,
# hp2621b - new 2621b with new extended keyboard
# these are closer to the new 26xx series than the other 2621b
-hp2621b-kx|hp 2621b with extended keyboard,
+hp2621b-kx|HP 2621b with extended keyboard,
use=newhpkeyboard, use=hp2621b,
-hp2621b-kx-p|hp 2621b with new keyboard & printer,
+hp2621b-kx-p|HP 2621b with new keyboard & printer,
use=hp+printer, use=hp2621b-kx,
# Some assumptions are made in the following entries.
#
# Hp 2622a & hp2623a display and graphics terminals
#
-hp2622|hp2622a|hp 2622,
+hp2622|hp2622a|HP 2622,
da, db,
lm#0, pb#19200,
is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
# The 2623 is a 2622 with extra graphics hardware.
-hp2623|hp2623a|hp 2623,
+hp2623|hp2623a|HP 2623,
use=hp2622,
-hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
+hp2624b-p|hp2624b-4p-p|Hewlett Packard 2624 B with printer,
use=hp+printer, use=hp2624,
# The hewlett packard B can have an optional extra 6 pages of memory.
-hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
+hp2624-10p|hp2624a-10p|hp2624b-10p|Hewlett Packard 2624 B w/ 10 pages of memory,
lm#240, use=hp2624,
-hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
+hp2624b-10p-p|Hewlett Packard 2624 B w/ extra memory & printer,
lm#240, use=hp2624b-p,
# Color manipulations for HP terminals
-hp+color|hp with colors,
+hp+color|HP with colors,
ccc,
colors#16, ncv#17, pairs#7,
initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
op=\E&v0S, scp=\E&v%p1%dS,
# <is2> sets the screen to be 80 columns wide
-hp2397a|hp2397|hewlett packard 2397A color terminal,
+hp2397a|hp2397|Hewlett Packard 2397A color terminal,
is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
# HP 700/44 Setup parameters:
# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
-hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
+hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode,
am, eo, xenl, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
use=hpsub,
-hpsub|hp terminals -- capability subset,
+hpsub|HP terminals -- capability subset,
am, da, db, mir, xhp, xon,
lines#24,
bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
-hpex|hp extended capabilities,
+hpex|HP extended capabilities,
cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
-hp2|hpex2|hewlett-packard extended capabilities newer version,
+hp2|hpex2|Hewlett-Packard extended capabilities newer version,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
- il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
- kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
- krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
+ il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
+ kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
+ knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ use=hp+pfk-cr, use=hp+arrows,
# HP 236 console
# From: <ddavis@ic.berkeley.edu>
cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
- kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
- kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
- knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
- rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
- smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
+ kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
+ kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER,
+ rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N,
+ smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
# From: Martin Trusler
hp98550-color|hp98550a-color|HP 9000 Series 300 color console,
%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
%t1%e.%p7%d%;z%p1%dI,
- is1=\EH\EJ, kbs=^H, kctab=\E2, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
- kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
- kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES,
- kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3,
- meml=\El, memu=\Em,
+ is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
+ kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
+ kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
I\E&v1b1c6I\E&v1x1y7I,
op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea,
u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY,
+ use=hp+pfk-cr, use=hp+arrows,
# From: Victor Duchovni <vic@fine.princeton.edu>
# (hp700-wy: removed obsolete ":nl=^J:";
bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
- hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
- kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
- krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
- rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
- smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
+ kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
+ kll=\EF, knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dB,
+ ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@,
+ rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ,
+ smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
bobcat|sbobcat|HP 9000 model 300 console,
am, da, db, mir, xhp,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=dku7003-dumb,
-#### Lear-Siegler (adm)
+#### Lear-Siegler (LSI adm)
#
# These guys are long since out of the terminals business, but
# in 1995 many current terminals still have an adm type as one of their
# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
# for clearing up this point.)
-adm1a|adm1|lsi adm1a,
+adm1a|adm1|LSI adm1a,
am,
cols#80, lines#24,
bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
ind=\n,
-adm2|lsi adm2,
+adm2|LSI adm2,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
# (adm3: removed obsolete ":ma=^K^P:" -- esr)
-adm3|lsi adm3,
+adm3|LSI adm3,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
# socket, you may be out of luck.
#
# (adm3a: some capabilities merged in from BRl entry -- esr)
-adm3a|lsi adm3a,
+adm3a|LSI adm3a,
OTbs, am,
cols#80, lines#24,
OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
adm3a+|adm3a plus,
kbs=^H, use=adm3a,
# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
-adm5|lsi adm5,
+adm5|LSI adm5,
xmc#1,
bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
rmso=\EG, smso=\EG, use=adm3a+,
# 7 - 7
# 20 - 6,8
#
-adm12|lsi adm12,
+adm12|LSI adm12,
OTbs, OTpt, am, mir,
OTug#1, cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
use=adm+sgr,
# (adm20: removed obsolete ":kn#7:" -- esr)
-adm20|lear siegler adm20,
+adm20|Lear Siegler adm20,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
sgr0=\E(, smso=\E),
-adm21|lear siegler adm21,
+adm21|Lear Siegler adm21,
xmc#1,
bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
# removed bogus-looking \200 from before <cup>. -- esr)
-adm22|lsi adm22,
+adm22|LSI adm22,
OTbs, am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# position 6, bank @c11, 25% from back end of the circuit board. Should be
# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
-adm31|lsi adm31 with sw6 set for underline mode,
+adm31|LSI adm31 with sw6 set for underline mode,
OTbs, am, mir,
cols#80, lines#24,
bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
if=/usr/share/tabset/vt100,
is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
-adm42|lsi adm42,
+adm42|LSI adm42,
OTbs, am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# The following termcap for the Lear Siegler ADM-42 leaves the
# "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
-adm42-ns|lsi adm-42 with no system line,
+adm42-ns|LSI adm-42 with no system line,
cbt=\EI\EF \011, clear=\E;\EF \011,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
# purposes in that it will shift the position of every character on the page,
# not just the cursor line!
# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
-adm1178|1178|lsi adm1178,
+adm1178|1178|LSI adm1178,
am,
cols#80, lines#24, xmc#1,
bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
#
# Standout mode is dim reverse-video.
-pt100|pt200|wren|fenix|prime pt100/pt200,
+pt100|pt200|wren|fenix|Prime pt100/pt200,
am, bw, mir, msgr,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
l\E[1Q,
smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
-pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
+pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode,
cols#132,
cup=\E[%i%p1%d;%p2%dH, use=pt100,
pt250|Prime PT250,
# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
# setup mode. Shift-s should be a configuration save to NVRAM.
-qvt101|qvt108|qume qvt 101 and QVT 108,
+qvt101|qvt108|Qume qvt 101 and QVT 108,
xmc#1, use=qvt101+,
# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
#
# Added kdch1, kil1, kdl1 based on screenshot -TD:
# http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
-qvt101+|qvt101p|qume qvt 101 PLUS product,
+qvt101+|qvt101p|Qume qvt 101 PLUS product,
am, bw, hs, ul,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
-qvt102|qume qvt 102,
+qvt102|Qume qvt 102,
cnorm=\E., use=qvt101,
# (qvt103: added <rmam>/<smam> based on init string -- esr)
-qvt103|qume qvt 103,
+qvt103|Qume qvt 103,
am, xenl, xon,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
%;m$<2>,
sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
-qvt103-w|qume qvt103 132 cols,
+qvt103-w|Qume qvt103 132 cols,
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
-qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
+qvt119+|qvt119p|qvt119|Qume qvt 119 and 119PLUS terminals,
am, hs, mir, msgr,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
lines#25, use=qvt119+,
-qvt203|qvt203+|qume qvt 203 Plus,
+qvt203|qvt203+|Qume qvt 203 Plus,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
-qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
+qvt203-w|qvt203-w-am|Qume qvt 203 PLUS in 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
#
cols#132, lines#25,
rs2=\E[?3h\E[=40h, use=qvt203,
-#### Televideo (tvi)
+#### TeleVideo (tvi)
#
# TeleVideo
# 550 East Brokaw Road
# These require incredible amounts of padding.
#
# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
-# Televideo terminals are ANSI and PC-ANSI compatible.
+# TeleVideo terminals are ANSI and PC-ANSI compatible.
-tvi803|televideo 803,
+tvi803|TeleVideo 803,
clear=\E*$<10>, use=tvi950,
# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
# D duplex
# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
-tvi910|televideo model 910,
+tvi910|TeleVideo model 910,
OTbs, am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
#
-tvi910+|televideo 910+,
+tvi910+|TeleVideo 910+,
dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
# <khome> from BRL entry -- esr)
-tvi912|tvi914|tvi920|old televideo 912/914/920,
+tvi912|tvi914|tvi920|old TeleVideo 912/914/920,
OTbs, OTpt, am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# We got some new tvi912c terminals that act really weird on the regular
# termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
-tvi912cc|tvi912 at cowell college,
+tvi912cc|tvi912 at Cowell College,
cup@, use=tvi912c,
# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
-# Televideo 921 and variants
+# TeleVideo 921 and variants
# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
-tvi921|televideo model 921 with sysline same as page & real vi function,
+tvi921|TeleVideo model 921 with sysline same as page & real vi function,
OTbs, OTpt, am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
# without the beeper
# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
-tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
+tvi92B|TeleVideo model 921 with sysline same as page & real vi function & no beeper,
am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
# in from a BSD termcap file because it looks like they do something the
# old ones skip -- esr)
-tvi924|televideo tvi924,
+tvi924|TeleVideo tvi924,
am, bw, hs, in, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80, xmc#0,
bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
# --------------------------------------------
#
# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
-tvi925|televideo 925,
+tvi925|TeleVideo 925,
OTbs, am, bw, hs, ul,
cols#80, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
# Finally, note that BSD has cud1=^V. -- esr)
#
# TVI 950 has 11 function-keys -TD
-tvi950|televideo 950,
+tvi950|TeleVideo 950,
OTbs, am, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, xmc#1,
acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
# set duplex (send) edit keys (\El) when entering vi
# set local (no send) edit keys (\Ek) when exiting vi
#
-tvi950-2p|televideo950 w/2 pages,
+tvi950-2p|TeleVideo 950 w/2 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
\E\\2\E-07\s\011,
# when exiting ex, reset 96 line page (\E\\3)
# place cursor at 0,24,1 (\E-07 )
#
-tvi950-4p|televideo950 w/4 pages,
+tvi950-4p|TeleVideo 950 w/4 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
\E\\3\E-07\s\011,
#
# set vb accordingly (\Ed ...delay... \Eb)
#
-tvi950-rv|televideo950 rev video,
+tvi950-rv|TeleVideo 950 rev video,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
use=tvi950,
# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
-tvi950-rv-2p|televideo950 rev video w/2 pages,
+tvi950-rv-2p|TeleVideo 950 rev video w/2 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
smkx=\El, use=tvi950,
# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
-tvi950-rv-4p|televideo950 rev video w/4 pages,
+tvi950-rv-4p|TeleVideo 950 rev video w/4 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
# ko implies -- esr)
# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
# also work.
-tvi955|televideo 955,
+tvi955|TeleVideo 955,
OTbs, mc5i, msgr@,
it#8, xmc@,
acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
\Ef\r,
sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
use=tvi950,
-tvi955-w|955-w|televideo955 w/132 cols,
+tvi955-w|955-w|TeleVideo 955 w/132 cols,
cols#132,
is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
# use half-intensity as normal mode, full intensity as <bold>
-tvi955-hb|955-hb|televideo955 half-bright,
+tvi955-hb|955-hb|TeleVideo 955 half-bright,
bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
sgr0=\EG0\E[=5h, use=tvi955,
# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
# it does to the function keys. I deduced <rmam>/<smam>.
# also added empty <acsc> to suppress tic warning, -- esr)
-tvi970|televideo 970,
+tvi970|TeleVideo 970,
OTbs, OTpt, am, da, db, mir, msgr,
cols#80, it#8, lines#24,
acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
smul=\E[4m, vpa=\E[%i%p1%dd,
-tvi970-vb|televideo 970 with visual bell,
+tvi970-vb|TeleVideo 970 with visual bell,
flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
use=tvi970,
-tvi970-2p|televideo 970 with using 2 pages of memory,
+tvi970-2p|TeleVideo 970 with using 2 pages of memory,
rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
use=tvi970,
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
-tvipt|televideo personal terminal,
+tvipt|TeleVideo personal terminal,
OTbs, am,
cols#80, lines#24,
cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
-tvi9065|televideo 9065,
+tvi9065|TeleVideo 9065,
am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
wnum#0, wsl#30,
# Beau's entry is combined with the vi50 entry from University of Wisconsin.
# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
# disguise; <kf7>-<kf9> are really l1-l3.
-vi50|visual 50,
+vi50|Visual 50,
OTbs, OTpt, am, da, db, msgr,
cols#80, it#8, lines#24,
OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
# this one was BSD & SCO's vi50
-vi50adm|visual 50 in adm3a mode,
+vi50adm|Visual 50 in adm3a mode,
am, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
# and <dl1> strings, but we seem to get along fine without them.
-vi200|visual 200,
+vi200|Visual 200,
OTbs, OTpt, am, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
# If your version of vi doesn't support function keys you may want
# to use vi200-f.
-vi200-f|visual 200 no function keys,
+vi200-f|Visual 200 no function keys,
is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
use=vi200,
-vi200-rv|visual 200 reverse video,
+vi200-rv|Visual 200 reverse video,
cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
# the function keys are programmable but we don't reprogram them to their
# an initialization file should be made for the 300 and they could be stuck
# in it.
# (vi300: added <rmam>/<smam> based on init string -- esr)
-vi300|visual 300 ansi x3.64,
+vi300|Visual 300 ansi x3.64,
am, bw, mir, xenl,
cols#80, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
smso=\E[1m, smul=\E[4m,
# some of the vi300s have older firmware that has the command
# sequence for setting editing extent reversed.
-vi300-old|visual 300 with old firmware (set edit extent reversed),
+vi300-old|Visual 300 with old firmware (set edit extent reversed),
is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
# Visual 500 prototype entry from University of Wisconsin.
# of this slow terminal. :xp: is 10 time the padding factor.
# (vi500: removed unknown :xp#4: termcap;
# also added empty <acsc> to suppress tic warning -- esr)
-vi500|visual 500,
+vi500|Visual 500,
am, mir, msgr,
cols#80, it#8, lines#33,
acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
-# The visual 550 is a visual 300 with tektronix graphics,
+# The visual 550 is a visual 300 with Tektronix graphics,
# and with 33 lines. clear screen is modified here to
# also clear the graphics.
-vi550|visual 550 ansi x3.64,
+vi550|Visual 550 ansi x3.64,
lines#33,
clear=\030\E[H\E[2J, use=vi300,
-vi603|visual603|visual 603,
+vi603|visual603|Visual 603,
hs, mir,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
# (with magic cookie).
#
# (wy30-mc: added <smcup> to suppress tic warning --esr)
-wy30-mc|wyse30-mc|wyse 30 with magic cookies,
+wy30-mc|wyse30-mc|Wyse 30 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
-wy30-vb|wyse30-vb|wyse 30 visible bell,
+wy30-vb|wyse30-vb|Wyse 30 visible bell,
bel@, use=wy30,
#
# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
# unset <xon> and delete the / from the delay.
# i.e. change $<100/> to $<100>
# (wy50-mc: added <smcup> to suppress tic warning --esr)
-wy50-mc|wyse50-mc|wyse 50 with magic cookies,
+wy50-mc|wyse50-mc|Wyse 50 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
smso=\EGt, use=wy50, use=adm+sgr,
-wy50-vb|wyse50-vb|wyse 50 visible bell,
+wy50-vb|wyse50-vb|Wyse 50 visible bell,
bel@, use=wy50,
-wy50-w|wyse50-w|wyse 50 132-column,
+wy50-w|wyse50-w|Wyse 50 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
use=wy50,
-wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
+wy50-wvb|wyse50-wvb|Wyse 50 132-column visible bell,
bel@, use=wy50-w,
#
\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
-wy350-vb|wyse350-vb|wyse 350 visible bell,
+wy350-vb|wyse350-vb|Wyse 350 visible bell,
bel@, use=wy350,
-wy350-w|wyse350-w|wyse 350 132-column,
+wy350-w|wyse350-w|Wyse 350 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
use=wy350,
-wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
+wy350-wvb|wyse350-wvb|Wyse 350 132-column visible bell,
bel@, use=wy350-w,
#
# This terminfo description is untested.
# The wyse100 emulates an adm31, so the adm31 entry should work.
#
-wy100|wyse 100,
+wy100|Wyse 100,
hs, mir,
cols#80, lines#24, xmc#1,
bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF, use=adm+sgr,
#
-wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
+wy120-w|wyse120-w|wy150-w|wyse150-w|Wyse 120/150 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy120,
#
-wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
+wy120-25|wyse120-25|wy150-25|wyse150-25|Wyse 120/150 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120,
#
-wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
+wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|Wyse 120/150 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
#
kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
#
-wy60-w|wyse60-w|wyse 60 132-column,
+wy60-w|wyse60-w|Wyse 60 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
rs2=\EeF$<150>\E`;$<150>, use=wy60,
#
-wy60-25|wyse60-25|wyse 60 80-column 25-lines,
+wy60-25|wyse60-25|Wyse 60 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60,
-wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
+wy60-25-w|wyse60-25-w|Wyse 60 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
#
-wy60-42|wyse60-42|wyse 60 80-column 42-lines,
+wy60-42|wyse60-42|Wyse 60 80-column 42-lines,
lines#42,
clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
-wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
+wy60-42-w|wyse60-42-w|Wyse 60 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
#
-wy60-43|wyse60-43|wyse 60 80-column 43-lines,
+wy60-43|wyse60-43|Wyse 60 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42,
-wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
+wy60-43-w|wyse60-43-w|Wyse 60 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42-w,
#
ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1,
u0=\E~>\E8, u1=\E[42h, use=wy60,
#
-wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
+wy99gt-w|wyse99gt-w|Wyse 99gt 132-column,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
use=wy99gt,
#
-wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
+wy99gt-25|wyse99gt-25|Wyse 99gt 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
#
-wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
+wy99gt-25-w|wyse99gt-25-w|Wyse 99gt 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`;$<150>, use=wy99gt-w,
#
smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF, use=adm+sgr,
#
-wy160-w|wyse160-w|wyse 160 132-column,
+wy160-w|wyse160-w|Wyse 160 132-column,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
rs2=\EeF$<150>\E`;$<150>, use=wy160,
#
-wy160-25|wyse160-25|wyse 160 80-column 25-lines,
+wy160-25|wyse160-25|Wyse 160 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160,
-wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
+wy160-25-w|wyse160-25-w|Wyse 160 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
#
-wy160-42|wyse160-42|wyse 160 80-column 42-lines,
+wy160-42|wyse160-42|Wyse 160 80-column 42-lines,
lines#42,
clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
rs3=\Ee*$<150>, use=wy160,
-wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
+wy160-42-w|wyse160-42-w|Wyse 160 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
#
-wy160-43|wyse160-43|wyse 160 80-column 43-lines,
+wy160-43|wyse160-43|Wyse 160 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42,
-wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
+wy160-43-w|wyse160-43-w|Wyse 160 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42-w,
#
# cookies. The wy75-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
-wy75|wyse75|wyse 75,
+wy75|wyse75|Wyse 75,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, lines#24, ma#1, pb#1201, wsl#78,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
-wy75-mc|wyse75-mc|wyse 75 with magic cookies,
+wy75-mc|wyse75-mc|Wyse 75 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
%t\016%e\017%;,
sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
use=wy75,
-wy75-vb|wyse75-vb|wyse 75 with visible bell,
+wy75-vb|wyse75-vb|Wyse 75 with visible bell,
pb@,
bel@, use=wy75,
-wy75-w|wyse75-w|wyse 75 in 132 column mode,
+wy75-w|wyse75-w|Wyse 75 in 132 column mode,
cols#132, wsl#130,
rs2=\E[35h\E[?3h$<80>, use=wy75,
-wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
+wy75-wvb|wyse75-wvb|Wyse 75 with visible bell 132 columns,
pb@,
bel@, use=wy75-w,
#
# <dch> and <ich> work best when XON/XOFF is set. <ich> and
# <dch> leave trash on the screen when used without XON/XOFF.
#
-wy85|wyse85|wyse 85,
+wy85|wyse85|Wyse 85,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
use=vt220+cvis, use=vt220+keypad,
#
# Wyse 85 with visual bell.
-wy85-vb|wyse85-vb|wyse 85 with visible bell,
+wy85-vb|wyse85-vb|Wyse 85 with visible bell,
bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
#
# Wyse 85 in 132-column mode.
-wy85-w|wyse85-w|wyse 85 in 132-column mode,
+wy85-w|wyse85-w|Wyse 85 in 132-column mode,
cols#132, wsl#132,
rs2=\E[35h$<70/>\E[?3h, use=wy85,
#
# Wyse 85 in 132-column mode with visual bell.
-wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
+wy85-wvb|wyse85-wvb|Wyse 85 with visible bell 132-columns,
bel@, use=wy85-w,
# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
# Technical" isn't responding. So there's the question of whether the wy85
# terminfo should reflect the manufacturer's intended behaviour of the terminal
# or the actual."
-wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
+wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# The Compose Character key can be used as a meta key if changed
# by set-up.
#
-wy185|wyse185|wyse 185,
+wy185|wyse185|Wyse 185,
am, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
use=vt220+vtedit, use=vt220+keypad,
#
# Wyse 185 with 24 data lines and top status (terminal status)
-wy185-24|wyse185-24|wyse 185 with 24 data lines,
+wy185-24|wyse185-24|Wyse 185 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy185,
#
# Wyse 185 with visual bell.
-wy185-vb|wyse185-vb|wyse 185+flash,
+wy185-vb|wyse185-vb|Wyse 185+flash,
bel@, use=wy185,
#
# Wyse 185 in 132-column mode.
-wy185-w|wyse185-w|wyse 185 in 132-column mode,
+wy185-w|wyse185-w|Wyse 185 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
#
# Wyse 185 in 132-column mode with visual bell.
-wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
+wy185-wvb|wyse185-wvb|Wyse 185+flash+132 cols,
bel@, use=wy185-w,
# wy325 terminfo entries
#
# lines 24 columns 80 vb
#
-wy325-vb|wyse325-vb|wyse-325 with visual bell,
+wy325-vb|wyse325-vb|Wyse-325 with visual bell,
bel@, use=wy325,
#
# lines 24 columns 132
#
-wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
+wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy325,
#
# lines 25 columns 80
#
-wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
+wy325-25|wyse325-25|wy325-80|wyse-325|Wyse-325 25 lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 25 columns 132
#
-wy325-25w|wyse325-25w|wy325 132 columns,
+wy325-25w|wyse325-25w|Wyse-325 132 columns,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 25 columns 132 vb
#
-wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
+wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video,
bel@, use=wy325-w,
#
# lines 42 columns 80
#
-wy325-42|wyse325-42|wyse-325 42 lines,
+wy325-42|wyse325-42|Wyse-325 42 lines,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 42 columns 132
#
-wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
+wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 42 columns 132 vb
#
-wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
+wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell,
bel@, use=wy325-w,
#
# lines 43 columns 80
#
-wy325-43|wyse325-43|wyse-325 43 lines,
+wy325-43|wyse325-43|Wyse-325 43 lines,
lh@, lines#43, lw@, nlab@,
pln@, use=wy325,
#
# lines 43 columns 132
#
-wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
+wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 43 columns 132 vb
#
-wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
+wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell,
bel@, use=wy325-w,
# Wyse 370 -- 24 line screen with status line.
# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
#
# Bug: The <op> capability resets attributes.
-wy370-nk|wyse 370 without function keys,
+wy370-nk|Wyse 370 without function keys,
am, ccc, hs, mc5i, mir, msgr, xenl, xon,
colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# keypad in Dec application mode which doesn't seem to work
# with SCO applications.
#
-wy520|wyse520|wyse 520,
+wy520|wyse520|Wyse 520,
am, hs, km, mc5i, mir, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
vpa=\E[%i%p1%dd, use=vt220+vtedit, use=vt220+keypad,
#
# Wyse 520 with 24 data lines and status (terminal status)
-wy520-24|wyse520-24|wyse 520 with 24 data lines,
+wy520-24|wyse520-24|Wyse 520 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy520,
#
# Wyse 520 with visual bell.
-wy520-vb|wyse520-vb|wyse 520 with visible bell,
+wy520-vb|wyse520-vb|Wyse 520 with visible bell,
flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
#
# Wyse 520 in 132-column mode.
-wy520-w|wyse520-w|wyse 520 in 132-column mode,
+wy520-w|wyse520-w|Wyse 520 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
#
# Wyse 520 in 132-column mode with visual bell.
-wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
+wy520-wvb|wyse520-wvb|Wyse 520 with visible bell 132-columns,
flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
#
#
# - Delete : delete a character (have to change interrupt character
# to CTRL-C: stty intr '^c') for it to work since the
# Delete key sends 7FH.
-wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
+wy520-epc|wyse520-epc|Wyse 520 with EPC keyboard,
kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
use=wy520,
#
# Wyse 520 with 24 data lines and status (terminal status)
# with EPC keyboard.
-wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
+wy520-epc-24|wyse520-pc-24|Wyse 520 with 24 data lines and EPC keyboard,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy520-epc,
#
# Wyse 520 with visual bell.
-wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
+wy520-epc-vb|wyse520-pc-vb|Wyse 520 with visible bell and EPC keyboard,
flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
#
# Wyse 520 in 132-column mode.
-wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
+wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
#
# Wyse 520 in 132-column mode with visual bell.
-wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
+wy520-epc-wvb|wyse520-p-wvb|Wyse 520 with visible bell 132-columns and EPC keyboard,
flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
#
# Wyse 520 in 80-column, 36 lines
-wy520-36|wyse520-36|wyse 520 with 36 data lines,
+wy520-36|wyse520-36|Wyse 520 with 36 data lines,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
use=wy520,
#
# Wyse 520 in 80-column, 48 lines
-wy520-48|wyse520-48|wyse 520 with 48 data lines,
+wy520-48|wyse520-48|Wyse 520 with 48 data lines,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
use=wy520,
#
# Wyse 520 in 132-column, 36 lines
-wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
+wy520-36w|wyse520-36w|Wyse 520 with 132 columns and 36 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
use=wy520-36,
#
# Wyse 520 in 132-column, 48 lines
-wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
+wy520-48w|wyse520-48w|Wyse 520 with 48 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
#
#
# Wyse 520 in 80-column, 36 lines with EPC keyboard
-wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
+wy520-36pc|wyse520-36pc|Wyse 520 with 36 data lines and EPC keyboard,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
use=wy520-epc,
#
# Wyse 520 in 80-column, 48 lines with EPC keyboard
-wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
+wy520-48pc|wyse520-48pc|Wyse 520 with 48 data lines and EPC keyboard,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
use=wy520-epc,
#
# Wyse 520 in 132-column, 36 lines with EPC keyboard
-wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
+wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
use=wy520-36pc,
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
-wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
+wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
-vt320-k311|dec vt320 series as defined by kermit 3.11,
+vt320-k311|DEC vt320 series as defined by kermit 3.11,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# NOTE: calling 'beep' turns on the backlight (bell)
# NOTE: calling 'flash' turns it on and back off (visual bell)
#
-MtxOrb|Generic Matrix Orbital LCD display,
+MtxOrb|generic Matrix Orbital LCD display,
bel=\376B\001, clear=\376X\376C\376R\376K\376T,
cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
flash=\376B\001$<200>\376F, home=\376H,
cols#132,
is1=\E[?3h, use=att5418,
-att4420|tty4420|teletype 4420,
+att4420|tty4420|Teletype 4420,
OTbs, da, db, eo, msgr, ul, xon,
cols#80, lines#24, lm#72,
bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
# The terminal has either bold or blink, depending on options
#
# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
-att4424|tty4424|teletype 4424,
+att4424|tty4424|Teletype 4424,
OTbs, am, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
tbc=\EF,
-att4424-1|tty4424-1|teletype 4424 in display function group I,
+att4424-1|tty4424-1|Teletype 4424 in display function group I,
kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
use=att4424,
# The following two lines are the comment originally attached to the entry:
# This entry appears to avoid the top line - I have no idea why.
# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
-att4424m|tty4424m|teletype 4424M,
+att4424m|tty4424m|Teletype 4424M,
am, da, db, mir,
cols#80, it#8, lines#23,
bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
-att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
+att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode,
cols#132, lm#54, wsl#97,
is1=\E[?3h$<100>, use=tty5425,
# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
-att4426|tty4426|teletype 4426S,
+att4426|tty4426|Teletype 4426S,
am, da, db, xon,
cols#80, lines#24, lm#48,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# <msgr> is from an otherwise inferior BRL for this terminal. That entry
# also has <ll>=\E[70H commented out and marked unsafe.
# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
-att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
+att5620|dmd|tty5620|ttydmd|5620|AT&T 5620 terminal 88 columns,
OTbs, am, msgr, npc, xon,
cols#88, it#8, lines#70,
bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
smso=\E[7m, smul=\E[4m, use=ecma+index,
-att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
+att5620-24|tty5620-24|dmd-24|Teletype dmd 5620 in a 24x80 layer,
lines#24, use=att5620,
-att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
+att5620-34|tty5620-34|dmd-34|Teletype dmd 5620 in a 34x80 layer,
lines#34, use=att5620,
# 5620 layer running the "S" system's downloaded graphics handler:
-att5620-s|tty5620-s|layer|vitty|5620 S layer,
+att5620-s|tty5620-s|layer|vitty|AT&T 5620 S layer,
OTbs, OTpt, am,
cols#80, it#8, lines#72,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%i%p1%dx,
-att605-pc|ATT 605 in pc term mode,
+att605-pc|AT&T 605 in pc term mode,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
\263,
cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
# (ampex80: some capabilities merged in from SCO's entry -- esr)
-ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
+ampex80|a80|d80|dialogue|dialogue80|Ampex dialogue 80,
OTbs, am, bw, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
smso=\Ej, smul=\El, tbc=\E3,
# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
-ampex175|ampex d175,
+ampex175|Ampex d175,
am,
cols#80, lines#24,
bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# mode), this key can be used as the erase key; I find I like this. Because
# some people and some systems may not, there is another termcap ("ampex175")
# that suppresses this little eccentricity by omitting the relevant capability.
-ampex175-b|ampex d175 using left arrow for erase,
+ampex175-b|Ampex d175 using left arrow for erase,
kbs=^_, use=ampex175,
# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
# (ampex210: removed obsolete ":kn#10:" -- esr)
-ampex210|a210|ampex a210,
+ampex210|a210|Ampex a210,
OTbs, am, hs, xenl,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
# and moved the padding to be *after* the caps -- esr)
-ampex219|ampex-219|amp219|Ampex with Automargins,
+ampex219|ampex-219|amp219|Ampex with automargins,
hs, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
# unused
#
-annarbor4080|aa4080|ann arbor 4080,
+annarbor4080|aa4080|Ann Arbor 4080,
OTbs, am,
cols#80, lines#40,
bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
# 3. Number of lines below (outside of) desired scroll region.
# 4. Total number of lines on the screen, the same as the first parameter.
# The generic Ann Arbor entry is the only one that uses this.
-aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
+aaa+unk|aaa-unk|Ann Arbor Ambassador (internal - don't use this directly),
OTbs, am, km, mc5i, mir, xon,
cols#80, it#8,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
-aaa+rv|ann arbor ambassador in reverse video,
+aaa+rv|Ann Arbor Ambassador in reverse video,
blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
rs1=\E[H\E[7m\E[J$<156>,
;%;%?%p7%t8;%;m\016,
sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
# Ambassador with the DEC option, for partial vt100 compatibility.
-aaa+dec|ann arbor ambassador in dec vt100 mode,
+aaa+dec|Ann Arbor Ambassador in DEC vt100 mode,
acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O,
sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
%p7%t8;%;m%?%p9%t\016%e\017%;,
smacs=^N,
-aaa-18|ann arbor ambassador/18 lines,
+aaa-18|Ann Arbor Ambassador/18 lines,
lines#18,
is2=\E7\E[60;0;0;18p\E8,
rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
use=aaa+unk,
-aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
+aaa-18-rv|Ann Arbor Ambassador/18 lines+reverse video,
use=aaa+rv, use=aaa-18,
-aaa-20|ann arbor ambassador/20 lines,
+aaa-20|Ann Arbor Ambassador/20 lines,
lines#20,
is2=\E7\E[60;0;0;20p\E8,
rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
use=aaa+unk,
-aaa-22|ann arbor ambassador/22 lines,
+aaa-22|Ann Arbor Ambassador/22 lines,
lines#22,
is2=\E7\E[60;0;0;22p\E8,
rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
use=aaa+unk,
-aaa-24|ann arbor ambassador/24 lines,
+aaa-24|Ann Arbor Ambassador/24 lines,
lines#24,
is2=\E7\E[60;0;0;24p\E8,
rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
use=aaa+unk,
-aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
+aaa-24-rv|Ann Arbor Ambassador/24 lines+reverse video,
use=aaa+rv, use=aaa-24,
-aaa-26|ann arbor ambassador/26 lines,
+aaa-26|Ann Arbor Ambassador/26 lines,
lines#26,
is2=\E7\E[60;0;0;26p\E8,
rmcup=\E[60;0;0;26p\E[26;1H\E[K,
smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
-aaa-28|ann arbor ambassador/28 lines,
+aaa-28|Ann Arbor Ambassador/28 lines,
lines#28,
is2=\E7\E[60;0;0;28p\E8,
rmcup=\E[60;0;0;28p\E[28;1H\E[K,
smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
-aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
+aaa-30-s|aaa-s|Ann Arbor Ambassador/30 lines w/status,
eslok, hs,
lines#29,
dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
rmcup=\E[60;1;0;30p\E[29;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
-aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
+aaa-30-s-rv|aaa-s-rv|Ann Arbor Ambassador/30 lines+status+reverse video,
use=aaa+rv, use=aaa-30-s,
-aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
+aaa-s-ctxt|aaa-30-s-ctxt|Ann Arbor Ambassador/30 lines+status+save context,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
-aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|Ann Arbor Ambassador/30 lines+status+save context+reverse video,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
-aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
+aaa|aaa-30|ambas|ambassador|Ann Arbor Ambassador/30 lines,
lines#30,
is2=\E7\E[60;0;0;30p\E8,
rmcup=\E[60;0;0;30p\E[30;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
-aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
+aaa-30-rv|aaa-rv|Ann Arbor Ambassador/30 lines in reverse video,
use=aaa+rv, use=aaa-30,
-aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
+aaa-30-ctxt|aaa-ctxt|Ann Arbor Ambassador/30 lines; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa-30,
-aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
+aaa-30-rv-ctxt|aaa-rv-ctxt|Ann Arbor Ambassador/30 lines reverse video; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa+rv, use=aaa-30,
-aaa-36|ann arbor ambassador/36 lines,
+aaa-36|Ann Arbor Ambassador/36 lines,
lines#36,
is2=\E7\E[60;0;0;36p\E8,
rmcup=\E[60;0;0;36p\E[36;1H\E[K,
smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
-aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
+aaa-36-rv|Ann Arbor Ambassador/36 lines+reverse video,
use=aaa+rv, use=aaa-36,
-aaa-40|ann arbor ambassador/40 lines,
+aaa-40|Ann Arbor Ambassador/40 lines,
lines#40,
is2=\E7\E[60;0;0;40p\E8,
rmcup=\E[60;0;0;40p\E[40;1H\E[K,
smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
-aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
+aaa-40-rv|Ann Arbor Ambassador/40 lines+reverse video,
use=aaa+rv, use=aaa-40,
-aaa-48|ann arbor ambassador/48 lines,
+aaa-48|Ann Arbor Ambassador/48 lines,
lines#48,
is2=\E7\E[60;0;0;48p\E8,
rmcup=\E[60;0;0;48p\E[48;1H\E[K,
smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
-aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
+aaa-48-rv|Ann Arbor Ambassador/48 lines+reverse video,
use=aaa+rv, use=aaa-48,
-aaa-60-s|ann arbor ambassador/59 lines+status,
+aaa-60-s|Ann Arbor Ambassador/59 lines+status,
eslok, hs,
lines#59,
dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
-aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
+aaa-60-s-rv|Ann Arbor Ambassador/59 lines+status+reverse video,
use=aaa+rv, use=aaa-60-s,
-aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
+aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video,
use=aaa+dec, use=aaa+rv, use=aaa-60-s,
-aaa-60|ann arbor ambassador/60 lines,
+aaa-60|Ann Arbor Ambassador/60 lines,
lines#60,
is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
use=aaa+unk,
-aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
+aaa-60-rv|Ann Arbor Ambassador/60 lines+reverse video,
use=aaa+rv, use=aaa-60,
-aaa-db|ann arbor ambassador 30/destructive backspace,
+aaa-db|Ann Arbor Ambassador 30/destructive backspace,
OTbs@,
cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
-guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
+guru|guru-33|guru+unk|Ann Arbor guru/33 lines 80 cols,
lines#33,
flash=\E[>59h$<100>\E[>59l,
is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
guru+rv|guru changes for reverse video,
flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
-guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
+guru-rv|guru-33-rv|Ann Arbor guru/33 lines+reverse video,
use=guru+rv, use=guru-33,
guru+s|guru status line,
eslok, hs,
tsl=\E[>51h\E[1;%p1%dH\E[2K,
guru-nctxt|guru with no saved context,
smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
-guru-s|guru-33-s|ann arbor guru/33 lines+status,
+guru-s|guru-33-s|Ann Arbor guru/33 lines+status,
lines#32,
is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
-guru-24|ann arbor guru 24 lines,
+guru-24|Ann Arbor guru 24 lines,
cols#80, lines#24,
is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
use=guru+unk,
-guru-44|ann arbor guru 44 lines,
+guru-44|Ann Arbor guru 44 lines,
cols#97, lines#44,
is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
use=guru+unk,
-guru-44-s|ann arbor guru/44 lines+status,
+guru-44-s|Ann Arbor guru/44 lines+status,
lines#43,
is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
cols#89, lines#76,
is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
use=guru+unk,
-guru-76-s|ann arbor guru/76 lines+status,
+guru-76-s|Ann Arbor guru/76 lines+status,
cols#89, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
use=guru+unk,
-guru-76-w-s|ann arbor guru/76 lines+status+wide,
+guru-76-w-s|Ann Arbor guru/76 lines+status+wide,
cols#178, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
use=guru+unk,
-aaa-rv-unk|ann arbor unknown type,
+aaa-rv-unk|Ann Arbor unknown type,
lh#0, lw#0, nlab#0,
blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
use=regent40+,
# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
-viewpoint|addsviewpoint|adds viewpoint,
+viewpoint|addsviewpoint|ADDS Viewpoint,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
# Some viewpoints have bad ROMs that foo up on ^O
-screwpoint|adds viewpoint with ^O bug,
+screwpoint|ADDS Viewpoint with ^O bug,
cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
# Underlined Half Intensity
# Blinking c 0143
# Video suppress D 0104
-vp3a+|viewpoint3a+|adds viewpoint 3a+,
+vp3a+|viewpoint3a+|ADDS Viewpoint 3a+,
am, bw,
cols#80, it#8, lines#24,
blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
-vp60|viewpoint60|addsvp60|adds viewpoint60,
+vp60|viewpoint60|addsvp60|ADDS Viewpoint60,
use=regent40,
#
# adds viewpoint 90 - from cornell
# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
# the status line
# Function key and label capabilities merged in from SCO.
-vp90|viewpoint90|adds viewpoint 90,
+vp90|viewpoint90|ADDS Viewpoint 90,
OTbs, bw, msgr, xhp,
cols#80, lines#24,
clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pc board.
-adds980|a980|adds consul 980,
+adds980|a980|ADDS Consul 980,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
# on. I also set up mine for parity (but you may not need it). Then
# save the setup with ^S.
# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
-cit101e-rv|Citoh CIT-101e (sets reverse video),
+cit101e-rv|C.Itoh CIT-101e (sets reverse video),
am, eo, mir, msgr, xenl, xon,
cols#80, it#8, lines#24,
OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# C. Itoh printers begin here
-citoh|ci8510|8510|c.itoh 8510a,
+citoh|ci8510|8510|C.Itoh 8510a,
cols#80, it#8,
bold=\E!, cub1@,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
#### Control Data (cdc)
#
-cdc456|cdc 456 terminal,
+cdc456|CDC 456 terminal,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# non-conformant (but more featureful) ANSI mode.
#
# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
-visa50|geveke visa 50 terminal in ansi 80 character mode,
+visa50|Geveke VISA 50 terminal in ANSI 80 character mode,
bw, mir, msgr,
cols#80, lines#25,
acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
#
# No delays needed on c108 because of ^S/^Q handshaking
#
-c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
+c108|concept108|c108-8p|concept108-8p|Concept 108 w/8 pages,
is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
\Ep\n,
rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
-c108-4p|concept108-4p|concept 108 w/4 pages,
+c108-4p|concept108-4p|Concept 108 w/4 pages,
OTbs, eslok, hs, xon,
pb@,
acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
smcup=\EU\Ev 8p\Ep\r\E\025,
tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
-c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
+c108-rv|c108-rv-8p|Concept 108 w/8 pages in reverse video,
rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
use=c108-rv-4p,
-c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
+c108-rv-4p|concept108rv4p|Concept 108 w/4 pages in reverse video,
flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
use=c108-4p,
-c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
+c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode,
cols#132,
is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
# cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
-c100|concept100|concept|c104|c100-4p|hds concept 100,
+c100|concept100|concept|c104|c100-4p|HDS Concept 100,
OTbs, am, eo, mir, ul, xenl,
cols#80, lines#24, pb#9600, vt#8,
bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
rmso=\Ed, rmul=\Eg, sgr0=\EN@,
smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
smso=\ED, smul=\EG,
-c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
+c100-rv|c100-rv-4p|concept100-rv|Concept 100 reverse video,
cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
smso=\EE, use=c100,
-oc100|oconcept|c100-1p|old 1 page concept 100,
+oc100|oconcept|c100-1p|old 1-page Concept 100,
in,
is3@, use=c100,
# <ht> through <el> included to specify padding needed in raw mode.
# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
-avt-ns|concept avt no status line,
+avt-ns|Concept AVT no status line,
OTbs, am, eo, mir, ul, xenl, xon,
cols#80, it#8, lines#24, lm#192,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
-avt-rv-ns|concept avt in reverse video mode/no status line,
+avt-rv-ns|Concept AVT in reverse video mode/no status line,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt-ns,
-avt-w-ns|concept avt in 132 column mode/no status line,
+avt-w-ns|Concept AVT in 132 column mode/no status line,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
use=avt-ns,
-avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
+avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w, use=avt-ns,
# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
# assumes an 8 page AVT but lm isn't currently used anywhere.)
#
-avt+s|concept avt status line changes,
+avt+s|Concept AVT status line changes,
eslok, hs,
lm#191,
dsl=\E[0*w, fsl=\E[1;1!w,
is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
tsl=\E[2;1!w\E[;%p1%dH\E[2K,
-avt|avt-s|concept-avt|avt w/80 columns,
+avt|avt-s|concept-avt|Concept AVT w/80 columns,
use=avt+s, use=avt-ns,
-avt-rv|avt-rv-s|avt reverse video w/sl,
+avt-rv|avt-rv-s|Concept AVT reverse video w/sl,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt+s, use=avt-ns,
-avt-w|avt-w-s|concept avt 132 cols+status,
+avt-w|avt-w-s|Concept AVT 132 cols+status,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
use=avt+s, use=avt-ns,
-avt-w-rv|avt-w-rv-s|avt wide+status+rv,
+avt-w-rv|avt-w-rv-s|Concept AVT wide+status+rv,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
# Initialization string 1 sets:
# ^R - vertical scrolling enabled
# ^C - blinking enabled
-dg-generic|Generic Data General terminal in DG mode,
+dg-generic|generic Data General terminal in DG mode,
am, bw, msgr, xon,
cols#80, lines#24,
bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
# maybe they were originally nuls (which would fit).
-dg200|data general dasher 200,
+dg200|Data General DASHER 200,
OTbs, am, bw,
cols#80, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
# dg450 from Cornell (not official)
-dg450|dg6134|data general 6134,
+dg450|dg6134|Data General 6134,
cub1@, cuf1=^X, use=dg200,
# Not official...
# This also matches a posted description of something called a `Dasher 100'
# so there's a dg100 alias here.
# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
-dg6053-old|dg100|data general 6053,
+dg6053-old|dg100|Data General 6053,
OTbs, am, bw, ul,
cols#80, lines#24,
OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
-dm1520|dm1521|datamedia 1520,
+dm1520|dm1521|Datamedia 1520,
OTbs, am, xenl,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
khome=^Y,
# dm2500: this terminal has both <ich> and <smir>. Applications using
# termcap/terminfo directly (rather than through ncurses) might be confused.
-dm2500|datamedia2500|datamedia 2500,
+dm2500|datamedia2500|Datamedia 2500,
OTbs, OTnc,
cols#80, lines#24,
bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
# also, has a meta-key.
# From: <goldberger@su-csli.arpa>
# (dmchat: ":MT:" changed to ":km:" -- esr)
-dmchat|dmchat version of datamedia 2500,
+dmchat|dmchat version of Datamedia 2500,
km,
dl1=\020\032\030\035$<2/>,
il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
# (dm3025: ":MT:" changed to ":km:" -- esr)
-dm3025|datamedia 3025a,
+dm3025|Datamedia 3025a,
OTbs, km,
cols#80, it#8, lines#24,
bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
smir=\EP, smso=\EO1,
-dm3045|datamedia 3045a,
+dm3045|Datamedia 3045a,
OTbs, am, eo, km@, ul, xenl,
dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
# Aux Bits/Char 0=7 1=8
# CRT Saver 0=Off 1=On
# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
-dm80|dmdt80|dt80|datamedia dt80/1,
+dm80|dmdt80|dt80|Datamedia dt80/1,
clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
# reverse video.
-dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
+dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode,
cols#132,
clear=\E[H\E[2J$<50/>, cud1=\n,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
# from the other Datamedias in use here, and yet to associate a model of
# the Excel terminals with the regular datamedia terminals that share
# major characteristics.
-excel62|excel64|datamedia Excel 62,
+excel62|excel64|Datamedia Excel 62,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80,
-excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
+excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80w,
-excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
+excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode,
dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
smir=\E[4h, use=dt80,
# Net: techsup@charm.sys.falco.com
#
# Current Falco models as of 1995 are generally ANSI-compatible and support
-# emulations of DEC VT-series, Wyse, and Televideo types.
+# emulations of DEC VT-series, Wyse, and TeleVideo types.
#
# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
# This terminal was released around 1983 and was discontinued long ago.
# The standout and underline highlights are the same.
-falco|ts1|ts-1|falco ts-1,
+falco|ts1|ts-1|Falco ts-1,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
smir=\Eq, smso=\Eg1, smul=\Eg1,
-falco-p|ts1p|ts-1p|falco ts-1 with paging option,
+falco-p|ts1p|ts-1p|Falco ts-1 with paging option,
OTbs, am, da, db, mir, msgr, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
smso=\Eg4, smul=\Eg1,
# (ts100: I added <rmam>/<smam> based on the init string -- esr)
-ts100|ts100-sp|falco ts100-sp,
+ts100|ts100-sp|Falco ts100-sp,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
-ts100-ctxt|falco ts-100 saving context,
+ts100-ctxt|Falco ts-100 saving context,
rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
#### Florida Computer Graphics
# NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
-sb1|beehive superbee,
+sb1|Beehive SuperBee,
OTbs, am, bw, da, db, mir, ul, xsb,
cols#80, lines#25, xmc#1,
bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
\s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
- kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
- kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
- krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
- rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
- smso=\E_1, smul=\E_0, tbc=\E3,
-sbi|superbee|beehive superbee at Indiana U.,
+ kf0=\E2, kf9=\E1, khome=\EH, kich1=\EQ\EO, krmir=\ER,
+ lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, rmso=\E_3,
+ rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, smso=\E_1,
+ smul=\E_0, tbc=\E3, use=hp+pfk-cr,
+sbi|superbee|Beehive SuperBee at Indiana U.,
xsb,
cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
use=sb1,
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy <nl> string.
-superbee-xsb|beehive super bee,
+superbee-xsb|Beehive SuperBee,
am, da, db, xsb,
cols#80, it#8, lines#25,
clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
home=\EH, ht=^I, hts=\E1,
ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
- kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
+ rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, use=hp+pfk-cr,
# This loses on lines > 80 chars long, use at your own risk
-superbeeic|super bee with insert char,
+superbeeic|SuperBee with insert char,
ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
-sb2|sb3|fixed superbee,
+sb2|sb3|fixed SuperBee,
xsb@, use=superbee,
#### Beehive Medical Electronics
# They were made by Beehive Medical Electronics in Utah. They went out of
# business in the early '80s.
#
-# (OK, then, I don't know why a couple of these say "harris beehive".)
+# (OK, then, I don't know why a couple of these say "Harris Beehive".)
#
# Reports are that most of these Beehive entries (except superbee) have not
# been tested and do not work right. <rmso> is a trouble spot. Be warned.
# (bee: <ich1> was empty, which is obviously bogus -- esr)
-beehive|bee|harris beehive,
+beehive|bee|Harris Beehive,
OTbs, am, mir,
cols#80, lines#24,
cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
# look at those spaces in <rmso>/<smso>. Seems strange to me...
# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
# really care, cook up one using ^F -- esr)
-beehive3|bh3m|beehiveIIIm|harris beehive 3m,
+beehive3|bh3m|beehiveIIIm|Harris Beehive 3m,
OTbs, am,
cols#80, it#8, lines#20,
bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
-beehive4|bh4|beehive 4,
+beehive4|bh4|Beehive 4,
am,
cols#80, lines#24,
bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
# There was an early Australian kit-built computer called a "Microbee".
# It's not clear whether this is for one of those or for a relative
# of the Beehive.
-microb|microbee|micro bee series,
+microb|microbee|Micro Bee series,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
- rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
+ kcuu1=\EA, kf9=\Ex, khome=\EH, rmso=\Ed@, rmul=\Ed@,
+ sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, use=hp+pfk-cr,
# 8675, 8686, and bee from Cyrus Rahman
# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
-ha8675|harris 8675,
+ha8675|Harris 8675,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
kf9=\Ee, use=bee,
# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
# in :is: -- esr)
-ha8686|harris 8686,
+ha8686|Harris 8686,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
-hz1000|hazeltine 1000,
+hz1000|Hazeltine 1000,
OTbs,
cols#80, lines#12,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
ind=\n,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
-hz1420|hazeltine 1420,
+hz1420|Hazeltine 1420,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
# freakout with out-of-range args and tn3270. No hz since it needs to
# receive tildes.
-hz1500|hazeltine 1500,
+hz1500|Hazeltine 1500,
OTbs, am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
# <smso=\E^Y>, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
-hz1510|hazeltine 1510,
+hz1510|Hazeltine 1510,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
# This version works with the escape switch off
# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
-hz1520-noesc|hazeltine 1520,
+hz1520-noesc|Hazeltine 1520,
am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
-hz1552|hazeltine 1552,
+hz1552|Hazeltine 1552,
OTbs,
cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
use=vt52,
-hz1552-rv|hazeltine 1552 reverse video,
+hz1552-rv|Hazeltine 1552 reverse video,
cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
# Note: h2000 won't work well because of a clash between upper case and ~'s.
-hz2000|hazeltine 2000,
+hz2000|Hazeltine 2000,
OTbs, OTnc, am,
cols#74, lines#27,
bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
-esprit-am|hazeltine esprit auto-margin,
+esprit-am|Hazeltine esprit auto-margin,
am, use=esprit,
# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
# Vi it seems always wants to send a control J for "do" and it turned out
kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
-ibm-system1|system1|ibm system/1 computer,
+ibm-system1|system1|IBM system/1 computer,
am, xt,
cols#80, lines#24,
bel=^G, clear=^Z, cub1=^H, cuf1=^\,
cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
ind=\n, rmso=\Ea, smso=\Eb,
-i400|infoton 400,
+
+i400|Infoton 400,
OTbs, am,
cols#80, lines#25,
bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
+
# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
-addrinfo,
- am,
- cols#80, lines#24,
- bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
- cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
+addrinfo|cursor-addressable Infoton,
+ cup=\037%p1%c%p2%c, home=^H, use=infoton,
+
+# "VISTAR II/HZ Technical Users Manual" (May 1975).
+#
+infoton2|cursor-addressable Infoton VISTAR II,
+ cup=~\021%p2%c%p1%c, home=^H, use=infoton,
+
+# "VISTAR Technical User's Manual" (October 1972).
+#
# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
-infoton,
+infoton|Infoton VISTAR,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
#
# Entry is by esr going solely on above information and is UNTESTED.
-# This actually looks a lot like a Televideo 9xx.
+# This actually looks a lot like a TeleVideo 9xx.
# This entry uses page 0 and is monochrome; I'm not brave enough to try
# to make color work without a test terminal. The <am> capability is a guess.
# The initialization string sets conversation mode, blinking underline cursor,
# . Padding values (sets xon)
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
-prism9|p9|P9|MDC Prism-9 in ANSII mode,
+prism9|p9|P9|MDC Prism-9 in ANSI mode,
am, bw, hs, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#72,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
use=p9-8-w,
-# p14: Prism-14 in ANSII mode
+# p14: Prism-14 in ANSI mode
# ---------------------------
#
# See p9 definition.
#
-prism14|p14|P14|MDC Prism-14 in ANSII mode,
+prism14|p14|P14|MDC Prism-14 in ANSI mode,
use=p9,
# p14-w: Prism-14 in 132 column mode
kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
# These termcaps (for mime2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
-mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
+mime2a-s|microterm mime2a (emulating an enhanced Soroc iq120),
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
# capability and recompile if you wish to have it included.
#
-ncr260wy325pp|NCR 2900_260 wyse 325,
+ncr260wy325pp|NCR 2900_260 Wyse 325,
am, bw, hs, km, mc5i, mir, msgr, xon,
colors#16, cols#80, lines#24, ncv#33, nlab#32,
acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
tsl=\EF,
-ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
+ncr260wy325wpp|NCR 2900_260 Wyse 325 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
# with the 'pairs' capability defined as below. If you wish to
# have it included, Un-comment it and recompile (using 'tic').
#
-ncr260wy350pp|NCR 2900_260 wyse 350,
+ncr260wy350pp|NCR 2900_260 Wyse 350,
am, bw, hs, km, mc5i, mir, msgr, xon,
colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
tsl=\EF,
-ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
+ncr260wy350wpp|NCR 2900_260 Wyse 350 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
# restored if needed.
# (ncr260wy50+pp: originally contained commented-out
# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
-ncr260wy50+pp|NCR 2900_260 wyse 50+,
+ncr260wy50+pp|NCR 2900_260 Wyse 50+,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, lines#24, nlab#32, xmc#1,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
\Ee4\Ex@\E`9\Ee7$<100>,
sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
-ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
+ncr260wy50+wpp|NCR 2900_260 Wyse 50+ wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
\Ee4\Ex@\E`9\Ee7$<200>,
use=ncr260wy50+pp,
-ncr260wy60pp|NCR 2900_260 wyse 60,
+ncr260wy60pp|NCR 2900_260 Wyse 60,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, lines#24, nlab#32,
acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
tsl=\EF,
-ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
+ncr260wy60wpp|NCR 2900_260 Wyse 60 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
use=ncr260vt300wan,
ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
use=ncr260vt300wpp,
-ncr160wy50+pp|NCR 2900_160 wyse 50+,
+ncr160wy50+pp|NCR 2900_160 Wyse 50+,
use=ncr260wy50+pp,
-ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
+ncr160wy50+wpp|NCR 2900_160 Wyse 50+ wide mode,
use=ncr260wy50+wpp,
-ncr160wy60pp|NCR 2900_160 wyse 60,
+ncr160wy60pp|NCR 2900_160 Wyse 60,
use=ncr260wy60pp,
-ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
+ncr160wy60wpp|NCR 2900_160 Wyse 60 wide mode,
use=ncr260wy60wpp,
ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
am, hs, mc5i, mir, msgr, xon,
# P4 <==> Blink attribute parameter
# P5 <==> Dim attribute parameter
# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
-ncr7900i|ncr7900|n7900|ncr 7900 model 1,
+ncr7900i|ncr7900|n7900|NCR 7900 model 1,
am, bw, ul,
cols#80, lines#24, xmc#1,
bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
%*%+%c,
sgr0=\E0@, smso=\E0Q, smul=\E0`,
-ncr7900iv|ncr 7900 model 4,
+ncr7900iv|NCR 7900 model 4,
am, bw, eslok, hs,
cols#80, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
# The user can enter a CTRL-B to get out of this locked state.
# In <hpa>, we want to output the character given by the formula:
# ((col / 10) * 16) + (col % 10) where "col" is "p1"
-ncr7901|ncr 7901 model,
+ncr7901|NCR 7901 model,
am, bw, ul,
cols#80, lines#24,
bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
# NDR 9500
# Manufactured in the early/mid eighties, behaves almost the same as a
-# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
+# TeleVideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
# These are official terminfo entries from within Perkin-Elmer.
#
-bantam|pe550|pe6100|perkin elmer 550,
+bantam|pe550|pe6100|Perkin Elmer 550,
OTbs,
cols#80, lines#24,
bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
-fox|pe1100|perkin elmer 1100,
+fox|pe1100|Perkin Elmer 1100,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
-owl|pe1200|perkin elmer 1200,
+owl|pe1200|Perkin Elmer 1200,
OTbs, am, in,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
-pe1251|pe6300|pe6312|perkin elmer 1251,
+pe1251|pe6300|pe6312|Perkin Elmer 1251,
am,
cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
# (pe7000m: this had
# rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
-pe7000m|perkin elmer 7000 series monochrome monitor,
+pe7000m|Perkin Elmer 7000 series monochrome monitor,
am,
cols#80, lines#24,
bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
ll=\ES7\s, ri=\ER,
-pe7000c|perkin elmer 7000 series colour monitor,
+pe7000c|Perkin Elmer 7000 series colour monitor,
is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
# utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
-uts30|sperry uts30 with cp/m@1R1,
+uts30|Sperry UTS30 with cp/m@1R1,
am, bw, hs,
cols#80, lines#24, wsl#40,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# area" for interactive text.
#
-tek|tek4012|tektronix 4012,
+tek|tek4012|Tektronix 4012,
OTbs, os,
cols#75, lines#35,
bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
ff=\014$<1000>, is2=\E^O,
# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4013|tektronix 4013,
+tek4013|Tektronix 4013,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
-tek4014|tektronix 4014,
+tek4014|Tektronix 4014,
cols#81, lines#38,
is2=\E\017\E9, use=tek4012,
# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4015|tektronix 4015,
+tek4015|Tektronix 4015,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
-tek4014-sm|tektronix 4014 in small font,
+tek4014-sm|Tektronix 4014 in small font,
cols#121, lines#58,
is2=\E\017\E:, use=tek4014,
# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4015-sm|tektronix 4015 in small font,
+tek4015-sm|Tektronix 4015 in small font,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
#
# live with Magic Cookie, remove the :so: and :se: fields and do without
# reverse video. If you like reverse video stand-out mode but don't want
# it to flash, change the letter 'H' to 'P' in the :so: field.
-tek4023|tektronix 4023,
+tek4023|Tektronix 4023,
OTbs, am,
OTdN#4, cols#80, lines#24, vt#4, xmc#1,
OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
-tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
+tek4024|tek4025|tek4027|Tektronix 4024/4025/4027,
OTbs, am, da, db,
cols#80, it#8, lines#34, lm#0,
bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
\037lea\sf5\r,
smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
\r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
-tek4025-17|tek 4025 17 line window,
+tek4025-17|Tektronix 4025 17 line window,
lines#17, use=tek4025,
-tek4025-17-ws|tek 4025 17 line window in workspace,
+tek4025-17-ws|Tektronix 4025 17 line window in workspace,
is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
\r\037wor\s17\r\037mon\s17\r,
rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
smso=\037att e\r, use=tek4025-17,
-tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
+tek4025-ex|tek4027-ex|Tektronix 4025/4027 w/!,
is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
# Tektronix 4025a
# not try to scroll, or cursor addressing won't work. Also, you can't
# see the cursor.)
# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
-tek4025-cr|tek 4025 for curses and rogue,
+tek4025-cr|Tektronix 4025 for curses and rogue,
OTbs, am,
cols#80, it#8, lines#33,
clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
# next two lines commented out since curses only allows 128 chars, sigh.
# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
-tek4025ex|4025ex|4027ex|tek 4025 w/!,
+tek4025ex|4025ex|4027ex|Tektronix 4025 w/!,
is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
\r,
rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
-tek4105|tektronix 4105,
+tek4105|Tektronix 4105,
OTbs, am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
smul=\E[=5;<2m, tbc=\E[1g,
# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
-tek4105-30|4015 emulating 30 line vt100,
+tek4105-30|Tektronix 4015 emulating 30 line vt100,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#30, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
# the developer used Emacs, which misuses cvvis (this description sets VT52
# mode in that capability).
-tek4107|tek4109|tektronix terminals 4107 4109,
+tek4107|tek4109|Tektronix terminals 4107 4109,
OTbs, am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
#
# 'vi' works reasonably well with this entry.
#
-otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
+otek4112|o4112-nd|otek4113|otek4114|old Tektronix 4110 series,
am,
cols#80, lines#34,
bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
# The 4112 with the ANSI compatibility enhancement
-tek4112|tek4114|tektronix 4110 series,
+tek4112|tek4114|Tektronix 4110 series,
OTbs, am, db,
cols#80, lines#34,
cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-tek4112-nd|4112 not in dialog area,
+tek4112-nd|Tektronix 4112 not in dialog area,
OTns,
cuu1=^K, use=tek4112,
-tek4112-5|4112 in 5 line dialog area,
+tek4112-5|Tektronix 4112 in 5 line dialog area,
lines#5, use=tek4112,
# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
# previously \0410 and \0411 sequences...I don't *think* they were supposed
# to be 4-digit octal -- esr)
-tek4113|tektronix 4113 color graphics with 5 line dialog area,
+tek4113|Tektronix 4113 color graphics with 5 line dialog area,
OTbs, am, da, eo,
cols#80, lines#5,
clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
\ERBA4\ERBA4\ERB0,
is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
-tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
+tek4113-34|Tektronix 4113 color graphics with 34 line dialog area,
lines#34,
is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
-tek4113-nd|tektronix 4113 color graphics with no dialog area,
+tek4113-nd|Tektronix 4113 color graphics with no dialog area,
OTbs, am, eo,
cols#80, it#8, lines#34,
clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
smul=\E[4m,
-tek4115|newer tektronix 4115 entry with more ANSI capabilities,
+tek4115|newer Tektronix 4115 entry with more ANSI capabilities,
am, xon,
cols#80, lines#34,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces <csr> with the needed
# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
-# chokes on; and adds a lot of initialization for the tek dialog area.
+# chokes on; and adds a lot of initialization for the Tektronix dialog area.
# Note that this entry uses all 34 lines and sets the cursor color to green.
# Steve Jacobson 8/85
# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
# commented out, <smir>=\E1 because there's no <rmir> -- esr)
-tek4125|tektronix 4125,
+tek4125|Tektronix 4125,
lines#34,
csr@, dl1=\E[1M, il1=\E[1L,
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
# Tab had been given as \E2I,that must be the tab-set capability -- esr)
-tek4404|tektronix 4404,
+tek4404|Tektronix 4404,
OTbs,
cols#80, it#8, lines#32,
blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
# string which sets a ct8500 into monitor mode (aka 4025 snoopy
# mode). The is string here cleans up a few things (but not
# everything).
-ct8500|tektronix ct8500,
+ct8500|Tektronix ct8500,
am, bw, da, db,
cols#80, lines#25,
bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
# version of xenl, perhaps am + xenl would work!)
#
# Bold, dim, and standout are simulated by colors and thus not allowed
-# with colors. The tektronix color table is mapped into the RGB color
+# with colors. The Tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
-tek4205|tektronix 4205,
+tek4205|Tektronix 4205,
ccc, mir, msgr,
colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# a "newline" style terminal (-crmode) vi figures all it needs is nl
# to get crlf, even if <cr> is not ^M.)
# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
-tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
+tty40|ds40|ds40-2|dataspeed40|Teletype dataspeed 40/2,
OTbs, xon,
cols#80, lines#24,
clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
# every other linefeed.
-vc303|vc103|vc203|volker-craig 303,
+vc303|vc103|vc203|Volker-Craig 303,
OTbs, OTns, am,
cols#80, lines#24,
bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
kcuu1=^N, ll=\017$<1>W,
-vc303a|vc403a|volker-craig 303a,
+vc303a|vc403a|Volker-Craig 303a,
clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
-vc404|volker-craig 404,
+vc404|Volker-Craig 404,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
-vc404-s|volker-craig 404 w/standout mode,
+vc404-s|Volker-Craig 404 w/standout mode,
cud1=\n, rmso=^O, smso=^N, use=vc404,
# From: <wolfgang@cs.sfu.ca>
# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
rmso=\E^_, smso=\E^Y,
-vc415|volker-craig 415,
+vc415|Volker-Craig 415,
clear=^L, use=vc404,
######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
smso=^O,
-appleII|apple ii plus,
+appleII|Apple II plus,
OTbs, am,
cols#80, it#8, lines#24,
clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
# Originally by Gary Ford 21NOV83
# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
-apple-80|apple II with smarterm 80 col,
+apple-80|Apple II with smarterm 80 col,
OTbs, am, bw,
cols#80, lines#24,
cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
ed=\013$<10*/>, el=\035$<10/>, home=^Y,
-apple-soroc|apple emulating soroc 120,
+apple-soroc|Apple emulating Soroc 120,
am,
cols#80, lines#24,
bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH,
# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
-apple-vm80|ap-vm80|apple with viewmax-80,
+apple-vm80|ap-vm80|Apple with viewmax-80,
OTbs,
cols#80, lines#24,
clear=\014$<300/>, cuf1=^\:,
#
# (lisa: changed <cvvis> to <cnorm> -- esr)
-lisa|apple lisa console display (black on white),
+lisa|Apple Lisa console display (black on white),
OTbs, am, eo, msgr,
cols#88, it#8, lines#32,
acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
-liswb|apple lisa console display (white on black),
+liswb|Apple Lisa console display (white on black),
is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
smso=\E[m, smul=\E[4m, use=lisa,
# with most systems.
#
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
-osborne-w|osborne1-w|osborne I in 104-column mode,
+osborne-w|osborne1-w|Osborne I in 104-column mode,
msgr, ul, xt,
cols#104, lines#24,
bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
-osborne|osborne1|osborne I in 80-column mode,
+osborne|osborne1|Osborne I in 80-column mode,
OTbs, am, mir, msgr, ul, xhp,
OTdB#4, cols#80, lines#24,
clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
use=linux-m1,
# From: Alexandre Montaron, 27 May 2020
-linux-s|Linux Console with added status line at bottom,
+linux-s|Linux console with added status line at bottom,
hs,
clear=\E[255;255H\E[A\E[1J\E[H, csr@,
dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
# He comments:
# viewdata lacks a true cup capability,
# so I achieved it with home and cud1/cuf1 sequences only !
-viewdata|prestel/viewdata terminals,
+viewdata|Prestel/Viewdata terminals,
am, bw, eslok, hz,
cols#40, lines#24,
bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
.rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
-viewdata-o|optimized version of viewdata prestel/viewdata terminals,
+viewdata-o|optimized version of Viewdata Prestel/Viewdata terminals,
cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
%Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
%{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
# Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
-viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
+viewdata-rv|Prestel/Viewdata terminals with reverse capabilitie (as green),
xmc#1,
rmso=\EG, smso=\EB, use=viewdata-o,
# paints lines in on the bottom line of the screen, so you get
# this big white gap.
-bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
+bitgraph|bg2.0nv|bg3.10nv|BBN BitGraph 2.0 or later (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
use=bg2.0,
-bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
+bg2.0rv|bg3.10rv|BBn BitGraph 2.0 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
use=bg2.0,
-bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
+bg2.0|bg3.10|BBN BitGraph 2.0 or later (no init),
OTbs, xenl,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=\r,
lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
sgr0=\E[m, smkx=\E=, smso=\E[7m,
-bg1.25rv|bbn bitgraph 1.25 (reverse video),
+bg1.25rv|BBN BitGraph 1.25 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
use=bg1.25,
-bg1.25nv|bbn bitgraph 1.25 (normal video),
+bg1.25nv|BBN BitGraph 1.25 (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
use=bg1.25,
# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
-bg1.25|bbn bitgraph 1.25,
+bg1.25|BBN BitGraph 1.25,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\,
smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
tsl=\EPY99:98\E\\\E[0;98v\E[2;7m,
-tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
+tws2102-sna|dku7102-sna|Bull Questar tws2102 for SNA,
dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
use=tws-generic,
-tws2103|xdku|BULL Questar tws2103,
+tws2103|xdku|Bull Questar tws2103,
ht=^I, use=tws-generic,
-tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
+tws2103-sna|dku7103-sna|Bull Questar tws2103 for SNA,
ht=^I, use=tws2102-sna,
-dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
+dku7102-old|Bull Questar 200 DKU7102 (microcode version < 6),
clear=\E[2J\E[H, cup@, dl@, dl1@,
dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m,
use=tws-generic,
-dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
+dku7202|Bull Questar 200 DKU7202 (colour/character attributes),
blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
#### Computer Automation
#
-ca22851|computer automation 22851,
+ca22851|Computer Automation 22851,
am,
cols#80, lines#24,
bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
#
# This entry has correct padding and the undocumented "ri" capability
-cyb83|xl83|cybernex xl-83,
+cyb83|xl83|Cybernex xl-83,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
-cyb110|mdl110|cybernex mdl-110,
+cyb110|mdl110|Cybernex mdl-110,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
# side of Datapoint still lives (1995) in the form of Intelogic Trace.
#
-dp3360|datapoint|datapoint 3360,
+dp3360|datapoint|Datapoint 3360,
OTbs, am,
cols#82, lines#25,
bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
# ctrl-O vertical line
# Unfortunately this cannot be fitted into the termcap/terminfo
# description scheme.
-dp8242|datapoint 8242,
+dp8242|Datapoint 8242,
msgr,
cols#80, lines#25,
bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
kf8=\E?w, kf9=\E?x,
-gt40|dec gt40,
+gt40|DEC gt40,
OTbs, os,
cols#72, lines#30,
bel=^G, cr=\r, cub1=^H, cud1=\n,
-gt42|dec gt42,
+gt42|DEC gt42,
OTbs, os,
cols#72, lines#40,
bel=^G, cr=\r, cub1=^H, cud1=\n,
-vt50|dec vt50,
+vt50|DEC vt50,
OTbs,
cols#80, lines#12,
bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
-vt50h|dec vt50h,
+vt50h|DEC vt50h,
cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ],
use=vt52+keypad, use=vt50,
# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
-vt61|vt-61|vt61.5|dec vt61,
+vt61|vt-61|vt61.5|DEC vt61,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
# The gigi does standout with red!
# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
-gigi|vk100|dec gigi graphics terminal,
+gigi|vk100|DEC gigi graphics terminal,
OTbs, am, xenl,
cols#84, lines#24,
bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
# grossly-overpriced failure (among other things, DEC's OS didn't include
# a format program, so you had to buy pre-formatted floppies from DEC at
# a hefty premium!).
-pro350|decpro|dec pro console,
+pro350|decpro|DEC pro console,
OTbs,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
-dw1|decwriter I,
+dw1|DECwriter I,
OTbs, hc, os,
cols#72,
bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
-dw2|decwriter|dw|decwriter II,
+dw2|decwriter|dw|DECwriter II,
OTbs, hc, os,
cols#132,
bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
#
# The dw3 does standout with wide characters.
#
-dw3|la120|decwriter III,
+dw3|la120|DECwriter III,
OTbs, hc, os,
cols#132,
bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
\r,
kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
-dw4|decwriter IV,
+dw4|DECwriter IV,
OTbs, am, hc, os,
cols#132,
bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
# These aren't official
-ln03|dec ln03 laser printer,
+ln03|DEC ln03 laser printer,
hc,
cols#80, lines#66,
bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
smul=\E[4m,
-ln03-w|dec ln03 laser printer 132 cols,
+ln03-w|DEC ln03 laser printer 132 cols,
cols#132,
bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
kcud1=\n, nel=\r\n, use=ln03,
# S402 0 0 0 0 0 0 0 0
# (h19: I added <rmam>/<smam> based on the init string;
# also added empty <acsc> to suppress a tic warning -- esr)
-h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
+h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ansi mode,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
-h19-bs|heathkit w/keypad shifted,
+h19-bs|Heathkit w/keypad shifted,
rmkx=\Eu, smkx=\Et, use=h19-b,
-h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
+h19-us|h19us|h19-smul|Heathkit w/keypad shifted/underscore cursor,
rmkx=\Eu, smkx=\Et, use=h19-u,
# (h19: merged in <ip> from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
# makes Emacs a little slower, but it remains in the land of the living.
# Big win.
-h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
+h19|heath|h19-b|heathkit|heath-19|z19|zenith|Heathkit h19,
OTbs, am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
-h19-u|heathkit with underscore cursor,
+h19-u|Heathkit with underscore cursor,
cnorm@, cvvis@, use=h19-b,
-h19-g|h19g|heathkit w/block cursor,
+h19-g|h19g|Heathkit w/block cursor,
cnorm=\Ex4, cvvis@, use=h19-b,
-alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
+alto-h19|altoh19|altoheath|alto-heath|alto emulating Heathkit h19,
lines#60,
dl1=\EM, il1=\EL, use=h19,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
-z29|zenith29|z29b|zenith z29b,
+z29|zenith29|z29b|Zenith z29b,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, lines#24,
OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
# From: Mike Meyers
# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
# looks vt100-compatible -- esr)
-z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
+z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
+z29a-kc-uc|h29a-kc-uc|Zenith z29 ansi mode with keyclick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
m,
use=z29a,
-z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
+z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ansi mode with block cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
\E[11m,
use=z29a,
-z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
+z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ansi mode with underscore cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
\E[11m,
use=z29a,
tsl=\E[s\E[>1h\E[25;%i%p1%dH,
# From: Brad Brahms <Brahms@USC-ECLC>
-z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
+z100|h100|z110|z-100|h-100|Heath/Zenith z-100 pc with color monitor,
cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
-z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
+z100bw|h100bw|z110bw|z-100bw|h-100bw|Heath/Zenith z-100 pc,
OTbs, OTpt, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
# (ztx: removed duplicate :sr: -- esr)
-ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
+ztx|ztx11|zt-1|htx11|ztx-1-a|Heath/Zenith ztx-10 or 11,
OTbs, am, eslok, hs,
cols#80, it#8, lines#24,
clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
ims950-b|bare ims950 no init string,
is2@, use=ims950,
# (ims950: removed obsolete ":ko@:" -- esr)
-ims950|ims televideo 950 emulation,
+ims950|IMS TeleVideo 950 emulation,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
# (ims950-rv: removed obsolete ":ko@:" -- esr)
-ims950-rv|ims tvi950 rev video,
+ims950-rv|IMS tvi950 rev video,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
# then sank out of sight.
#
-superbrain|intertec superbrain,
+superbrain|Intertec Superbrain,
OTbs, am, bw,
cols#80, lines#24,
OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
ind=\n, rmso=\E0@, smso=\E0P,
-# The intertube 2 has the "full duplex" problem like the tek 4025: if you
+# The intertube 2 has the "full duplex" problem like the Tektronix 4025: if you
# are typing and a command comes in, the keystrokes you type get interspersed
# with the command and it messes up
-intertube2|intertec data systems intertube 2,
+intertube2|Intertec data systems InterTube 2,
OTbs,
cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
#
# RCA VP3301 or VP3501
-rca|rca vp3301/vp3501,
+rca|RCA vp3301/vp3501,
OTbs,
cols#40, lines#24,
clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
#
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
-soroc120|iq120|soroc|soroc iq120,
+soroc120|iq120|soroc|Soroc iq120,
clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
kcuf1=^L, kcuu1=^K, use=adm3a,
-soroc140|iq140|soroc iq140,
+soroc140|iq140|Soroc iq140,
OTbs, am, mir,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
#
# (swtp: removed obsolete ":bc=^D:" -- esr)
-swtp|ct82|southwest technical products ct82,
+swtp|ct82|Southwest Technical Products ct82,
am,
cols#82, lines#20,
bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
#
# Tested, seems to work fine with vi.
-synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
+synertek|ktm|synertek380|Synertek KTM 3/80 tubeless terminal,
am,
cols#80, lines#24,
clear=^Z, cub1=^H, cuf1=^L,
# Model 100) that were ANSI-compatible.
#
# Note two things called "teleray". Reorder should move the common one
-# to the front if you have either. A dumb teleray with the cursor stuck
+# to the front if you have either. A dumb Teleray with the cursor stuck
# on the bottom and no obvious model number is probably a 3700.
#
-t3700|dumb teleray 3700,
+t3700|dumb Teleray 3700,
OTbs,
cols#80, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
-t3800|teleray 3800 series,
+t3800|Teleray 3800 series,
OTbs,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
home=\EH, ht=^I, ind=\n, ll=\EY7\s,
-t1061|teleray|teleray 1061,
+t1061|teleray|Teleray 1061,
OTbs, am, km, xhp, xt,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
tbc=\EG,
-t1061f|teleray 1061 with fast PROMs,
+t1061f|Teleray 1061 with fast PROMs,
dl1=\EM, il1=\EL, ip@, use=t1061,
# "Teleray Arpa Special", officially designated as
# "Teleray Arpa network model 10" with "Special feature 720".
# Note: this is NOT the old termcap's "t1061f with fast proms."
# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
-t10|teleray 10 special,
+t10|Teleray 10 special,
OTbs, km, xhp, xt,
cols#80, it#8, lines#24, xmc#2,
clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
smul=\ERH,
-# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
+# Teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
# back/forth words. Put the function keys (f1-f10) where they can be
# found, and turn off the other magic keys along the top row, except
# for line/local. Do the magic appropriate to make the page shifts work.
# Also toggle ^S/^Q for those of us who use Emacs.
-t16|teleray 16,
+t16|Teleray 16,
am, da, db, mir, xhp, xt,
cols#80, lines#24,
bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
# The Silent 700 was so called because it was built around a quiet thermal
# printer. It was portable, equipped with an acoustic coupler, and pretty
# neat for its day.
-ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
+ti700|ti733|ti735|ti745|ti800|Texas Instruments Silent 700/733/735/745 or OMNI 800,
OTbs, hc, os,
cols#80,
bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
# had just <smso>=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
# <invis> might work-- esr)
-zen30|z30|zentec 30,
+zen30|z30|Zentec 30,
OTbs, am, mir, ul,
cols#80, lines#24,
bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
# which were also in the original entry -- esr)
# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
-zen50|z50|zentec zephyr,
+zen50|z50|Zentec Zephyr,
OTbs, am,
cols#80, lines#24, xmc#1,
clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
#
# From: Gary Darland <goodmanc@garnet.berkeley.edu>
-apollo|apollo console,
+apollo|Apollo console,
OTbs, am, mir,
cols#88, lines#53,
clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
# We don't know whether or not the apollo guys replicated DEC's firmware bug
# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
# both these capabilities.
-apollo_15P|apollo 15 inch display,
+apollo_15P|Apollo 15 inch display,
rmir@, smir@, use=vt132,
-apollo_19L|apollo 19 inch display,
+apollo_19L|Apollo 19 inch display,
rmir@, smir@, use=vt132,
-apollo_color|apollo color display,
+apollo_color|Apollo color display,
rmir@, smir@, use=vt132,
#### AT&T consoles
# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
# MS-Kermit with Heath-19 emulation mode enabled
# (h19k: changed ":pt@:" to ":it@"
-h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
+h19k|h19kermit|Heathkit emulation provided by Kermit (no auto margin),
am@, da, db, xt,
it@,
ht@, use=h19-u,
-# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
+# Apple Macintosh with VersaTerm, a terminal emulator distributed by Synergy
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the Macintosh,
+versaterm|VersaTerm vt100 emulator for the Macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
#
# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
-diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
+diablo1620|diablo1720|diablo450|ipsi|Diablo 1620,
hc, os,
cols#132, it#8,
cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
-diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
+diablo1620-m8|diablo1640-m8|Diablo 1620 w/8 column left margin,
cols#124,
is2=\r \E9, use=diablo1620,
# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
-diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
+diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|Diablo 1640,
bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
use=diablo1620,
# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
# file -- esr)
-diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
+diablo1640-lm|diablo-lm|xerox-lm|Diablo 1640 with indented left margin,
cols#124,
rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
-diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
+diablo1740-lm|630-lm|1730-lm|x1700-lm|Diablo 1740 printer,
use=diablo1640-lm,
# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
cols#132,
bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
ind=\n,
-aj830|aj832|aj|anderson jacobson,
+aj830|aj832|aj|Anderson Jacobson,
hc, os,
bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
ind=\n,
smul=\E"U,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
# This is incomplete, but it's a start.
-nec5520|nec|spinwriter|nec 5520,
+nec5520|nec|spinwriter|NEC 5520,
hc, os,
cols#132, it#8,
bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
cols#80, it#8,
bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
-# I suspect the xerox 1720 is the same as the diablo 1620.
-xerox1720|x1720|x1750|xerox 1720,
+# I suspect the Xerox 1720 is the same as the Diablo 1620.
+xerox1720|x1720|x1750|Xerox 1720,
hc, os,
cols#132, it#8,
bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
khome=^Y,
+
+# http://www.bitsavers.org/pdf/datapro/alphanumeric_terminals/Datapro_C25_Datagraphix.pdf
+#
+# DatagraphiX, Inc.
+# (a subsidiary of General Dynamics),
+# P.O. Box 82449, San Diego, California 92138.
+#
# (d132: removed duplicate :ic=\E5:,
# merged in capabilities from a BRL entry -- esr)
-d132|datagraphix|datagraphix 132a,
+d132|datagraphix|DatagraphiX 132a,
da, db, in,
cols#80, lines#30,
bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
# * Replaced the translated BBN BitGraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
-# * Added teleray 16, vc415, cops10.
+# * Added Teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
# adm42-nl, pc52, gs6300, xerox820, uts30.
# * Pull SCO's padding into vi200 entry.
-# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
+# * Improved capabilities for tvi4107 and other TeleVideo and Viewpoint
# entries merged in from SCO's descriptions.
# * Fixed old-style prefix padding on zen50, h1500.
# * Moved old superbee entry to superbee-xsb, pulled in new superbee
# 2018-09-29
# + corrected acsc for tvi950 -TD
# + remove bogus kf0 from tvi950 -TD
-# + added function-key definitions to agree with Televideo 950 manual -TD
+# + added function-key definitions to agree with TeleVideo 950 manual -TD
# + add bel to tvi950 -TD
# + add shifted function-keys to regent60 -TD
# + renumber regent40 function-keys to match manual -TD
# but cancel the non-working Cr and Ms capabilities -TD
# + add foot and foot-direct -TD
#
+# 2021-08-15
+# + fix missing "%d" for setaf/setab code 8-15 in xterm+direct16 (report
+# by Florian Weimer) -TD
+#
+# 2021-08-16
+# + corrected tsl capability for terminator -TD
+#
+# 2021-09-04
+# + modify linux3.0 entry to reflect default mapping of shift-tab by
+# kbd 1.14 (report by Jan Engelhardt) -TD
+#
+# 2021-09-11
+# + add testing note for xterm-{hp|sco|sun} -TD
+# + corrected description for ansi.sys-old -TD
+# + add xterm+nopcfkeys, to fill in keys for xterm-hp, xterm-sun -TD
+# + use hp+arrows in a few places -TD
+# + use hp+pfk-cr in a few places -TD
+#
+# 2021-09-21
+# + add kbeg to xterm+keypad to accommodate termcap applications -TD
+# + add smglp and smgrp to vt420+lrmm, to provide useful data for the
+# "tabs" +m option -TD
+#
+# 2021-10-09
+# + fill in some details for infoton -TD
+# + fix spelling/consistency in several descriptions -TD
+# + use vt420+lrmm in vt420 -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff