+cat "conftest.$ac_ext" >&5
+cf_cv_ncurses_h2=no
+fi
+rm -f "conftest.$ac_objext" "conftest.$ac_ext"
+
+ if test "$cf_cv_ncurses_h2" != no ; then
+ cf_cv_ncurses_h2=$cf_incdir/$cf_header
+ test -n "$verbose" && echo $ECHO_N " ... found $ECHO_C" 1>&6
+ break
+ fi
+ test -n "$verbose" && echo " ... tested $cf_incdir/$cf_header" 1>&6
+ done
+ CPPFLAGS="$cf_save2_CPPFLAGS"
+ test "$cf_cv_ncurses_h2" != no && break
+ done
+ test "$cf_cv_ncurses_h2" = no && { { echo "$as_me:11030: error: not found" >&5
+echo "$as_me: error: not found" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:11035: result: $cf_cv_ncurses_h2" >&5
+echo "${ECHO_T}$cf_cv_ncurses_h2" >&6
+
+ cf_1st_incdir=`echo "$cf_cv_ncurses_h2" | sed -e 's%/[^/]*$%%'`
+ cf_cv_ncurses_header="`basename "$cf_cv_ncurses_h2"`"
+ if test "`basename "$cf_1st_incdir"`" = "$cf_ncuhdr_root" ; then
+ cf_cv_ncurses_header="$cf_ncuhdr_root/$cf_cv_ncurses_header"
+ fi
+
+if test -n "$cf_1st_incdir" ; then
+ for cf_add_incdir in $cf_1st_incdir
+ do
+ while test "$cf_add_incdir" != /usr/include
+ do
+ if test -d "$cf_add_incdir"
+ then
+ cf_have_incdir=no
+ if test -n "$CFLAGS$CPPFLAGS" ; then
+ # a loop is needed to ensure we can add subdirs of existing dirs
+ for cf_test_incdir in $CFLAGS $CPPFLAGS ; do
+ if test ".$cf_test_incdir" = ".-I$cf_add_incdir" ; then
+ cf_have_incdir=yes; break
+ fi
+ done
+ fi
+
+ if test "$cf_have_incdir" = no ; then
+ if test "$cf_add_incdir" = /usr/local/include ; then
+ if test "$GCC" = yes
+ then
+ cf_save_CPPFLAGS=$CPPFLAGS
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir"
+
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11071 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+int
+main (void)
+{
+printf("Hello")
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext"
+if { (eval echo "$as_me:11083: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:11086: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest.$ac_objext"'
+ { (eval echo "$as_me:11089: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11092: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+cf_have_incdir=yes
+fi
+rm -f "conftest.$ac_objext" "conftest.$ac_ext"
+ CPPFLAGS=$cf_save_CPPFLAGS
+ fi
+ fi
+ fi
+
+ if test "$cf_have_incdir" = no ; then
+ test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
+
+echo "${as_me:-configure}:11109: testing adding $cf_add_incdir to include-path ..." 1>&5
+
+ CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
+
+ cf_top_incdir=`echo "$cf_add_incdir" | sed -e 's%/include/.*$%/include%'`
+ test "$cf_top_incdir" = "$cf_add_incdir" && break
+ cf_add_incdir="$cf_top_incdir"
+ else
+ break
+ fi
+ else
+ break
+ fi
+ done
+ done
+fi
+
+fi
+
+# Set definitions to allow ifdef'ing for ncurses.h
+
+case "$cf_cv_ncurses_header" in
+(*ncurses.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_NCURSES_H 1
+EOF
+
+ ;;
+esac
+
+case "$cf_cv_ncurses_header" in
+(ncurses/curses.h|ncurses/ncurses.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_NCURSES_NCURSES_H 1
+EOF
+
+ ;;
+(ncursesw/curses.h|ncursesw/ncurses.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_NCURSESW_NCURSES_H 1
+EOF
+
+ ;;
+esac
+
+echo "$as_me:11157: checking for terminfo header" >&5
+echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6
+if test "${cf_cv_term_header+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+case "${cf_cv_ncurses_header}" in
+(*/ncurses.h|*/ncursesw.h)
+ cf_term_header=`echo "$cf_cv_ncurses_header" | sed -e 's%ncurses[^.]*\.h$%term.h%'`
+ ;;
+(*)
+ cf_term_header=term.h
+ ;;
+esac
+
+for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h"
+do
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 11175 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+#include <${cf_cv_ncurses_header:-curses.h}>
+#include <$cf_test>
+
+int
+main (void)
+{
+int x = auto_left_margin; (void)x
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext"
+if { (eval echo "$as_me:11190: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:11193: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest.$ac_objext"'
+ { (eval echo "$as_me:11196: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11199: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+
+ cf_cv_term_header="$cf_test"
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+
+ cf_cv_term_header=unknown
+
+fi
+rm -f "conftest.$ac_objext" "conftest.$ac_ext"
+ test "$cf_cv_term_header" != unknown && break
+done
+
+fi
+echo "$as_me:11215: result: $cf_cv_term_header" >&5
+echo "${ECHO_T}$cf_cv_term_header" >&6
+
+# Set definitions to allow ifdef'ing to accommodate subdirectories
+
+case "$cf_cv_term_header" in
+(*term.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_TERM_H 1
+EOF
+
+ ;;
+esac
+
+case "$cf_cv_term_header" in
+(ncurses/term.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_NCURSES_TERM_H 1
+EOF
+
+ ;;
+(ncursesw/term.h)
+
+cat >>confdefs.h <<\EOF
+#define HAVE_NCURSESW_TERM_H 1
+EOF
+
+ ;;
+esac
+
+# some applications need this, but should check for NCURSES_VERSION
+
+cat >>confdefs.h <<\EOF
+#define NCURSES 1
+EOF
+
+echo "$as_me:11253: checking for ncurses version" >&5
+echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6
+if test "${cf_cv_ncurses_version+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ cf_cv_ncurses_version=no
+ cf_tempfile=out$$
+ rm -f "$cf_tempfile"
+ if test "$cross_compiling" = yes; then
+
+ # This will not work if the preprocessor splits the line after the
+ # Autoconf token. The 'unproto' program does that.
+ cat > "conftest.$ac_ext" <<EOF
+#include <${cf_cv_ncurses_header:-curses.h}>
+#undef Autoconf
+#ifdef NCURSES_VERSION
+Autoconf NCURSES_VERSION
+#else
+#ifdef __NCURSES_H
+Autoconf "old"
+#endif
+;
+#endif
+EOF
+ cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out"
+ { (eval echo "$as_me:11279: \"$cf_try\"") >&5
+ (eval $cf_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11282: \$? = $ac_status" >&5
+ (exit "$ac_status"); }
+ if test -f conftest.out ; then
+ cf_out=`sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%' conftest.out`
+ test -n "$cf_out" && cf_cv_ncurses_version="$cf_out"
+ rm -f conftest.out
+ fi
+
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11292 "configure"
+#include "confdefs.h"
+
+#include <${cf_cv_ncurses_header:-curses.h}>
+#include <stdio.h>
+int main(void)
+{
+ FILE *fp = fopen("$cf_tempfile", "w");
+#ifdef NCURSES_VERSION
+# ifdef NCURSES_VERSION_PATCH
+ fprintf(fp, "%s.%d\\n", NCURSES_VERSION, NCURSES_VERSION_PATCH);
+# else
+ fprintf(fp, "%s\\n", NCURSES_VERSION);
+# endif
+#else
+# ifdef __NCURSES_H
+ fprintf(fp, "old\\n");
+# else
+ make an error
+# endif
+#endif
+ ${cf_cv_main_return:-return}(0);
+}
+_ACEOF
+rm -f "conftest$ac_exeext"
+if { (eval echo "$as_me:11317: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11320: \$? = $ac_status" >&5
+ (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"'
+ { (eval echo "$as_me:11322: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11325: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+
+ cf_cv_ncurses_version=`cat $cf_tempfile`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+fi
+rm -f core ./core.* ./*.core "conftest$ac_exeext" "conftest.$ac_objext" "conftest.$ac_ext"
+fi
+ rm -f "$cf_tempfile"
+
+fi
+echo "$as_me:11339: result: $cf_cv_ncurses_version" >&5
+echo "${ECHO_T}$cf_cv_ncurses_version" >&6
+test "$cf_cv_ncurses_version" = no ||
+cat >>confdefs.h <<\EOF
+#define NCURSES 1
+EOF
+
+cf_nculib_root=$cf_cv_screen
+ # This works, except for the special case where we find gpm, but
+ # ncurses is in a nonstandard location via $LIBS, and we really want
+ # to link gpm.
+cf_ncurses_LIBS=""
+cf_ncurses_SAVE="$LIBS"
+echo "$as_me:11352: checking for Gpm_Open in -lgpm" >&5
+echo $ECHO_N "checking for Gpm_Open in -lgpm... $ECHO_C" >&6
+if test "${ac_cv_lib_gpm_Gpm_Open+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgpm $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 11360 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char Gpm_Open ();
+int
+main (void)
+{
+Gpm_Open ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11379: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11382: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11385: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11388: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_gpm_Gpm_Open=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_gpm_Gpm_Open=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:11399: result: $ac_cv_lib_gpm_Gpm_Open" >&5
+echo "${ECHO_T}$ac_cv_lib_gpm_Gpm_Open" >&6
+if test "$ac_cv_lib_gpm_Gpm_Open" = yes; then
+ echo "$as_me:11402: checking for initscr in -lgpm" >&5
+echo $ECHO_N "checking for initscr in -lgpm... $ECHO_C" >&6
+if test "${ac_cv_lib_gpm_initscr+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgpm $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 11410 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char initscr ();
+int
+main (void)
+{
+initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11429: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11432: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11435: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11438: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_gpm_initscr=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_gpm_initscr=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:11449: result: $ac_cv_lib_gpm_initscr" >&5
+echo "${ECHO_T}$ac_cv_lib_gpm_initscr" >&6
+if test "$ac_cv_lib_gpm_initscr" = yes; then
+ LIBS="$cf_ncurses_SAVE"
+else
+ cf_ncurses_LIBS="-lgpm"
+fi
+
+fi
+
+case "$host_os" in
+(freebsd*)
+ # This is only necessary if you are linking against an obsolete
+ # version of ncurses (but it should do no harm, since it's static).
+ if test "$cf_nculib_root" = ncurses ; then
+ echo "$as_me:11464: checking for tgoto in -lmytinfo" >&5
+echo $ECHO_N "checking for tgoto in -lmytinfo... $ECHO_C" >&6
+if test "${ac_cv_lib_mytinfo_tgoto+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmytinfo $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 11472 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgoto ();
+int
+main (void)
+{
+tgoto ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11491: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11494: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11497: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11500: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_mytinfo_tgoto=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_mytinfo_tgoto=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:11511: result: $ac_cv_lib_mytinfo_tgoto" >&5
+echo "${ECHO_T}$ac_cv_lib_mytinfo_tgoto" >&6
+if test "$ac_cv_lib_mytinfo_tgoto" = yes; then
+ cf_ncurses_LIBS="-lmytinfo $cf_ncurses_LIBS"
+fi
+
+ fi
+ ;;
+esac
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in $cf_ncurses_LIBS; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+if test -n "$cf_cv_curses_dir" && test "$cf_cv_curses_dir" != "no"
+then
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in -l$cf_nculib_root; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+else
+
+ eval 'cf_cv_have_lib_'"$cf_nculib_root"'=no'
+ cf_libdir=""
+ echo "$as_me:11560: checking for initscr" >&5
+echo $ECHO_N "checking for initscr... $ECHO_C" >&6
+if test "${ac_cv_func_initscr+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11566 "configure"
+#include "confdefs.h"
+#define initscr autoconf_temporary
+#include <limits.h> /* least-intrusive standard header which defines gcc2 __stub macros */
+#undef initscr
+
+#ifdef __cplusplus
+extern "C"
+#endif
+
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char initscr (void);
+
+int
+main (void)
+{
+
+/* The GNU C library defines stubs for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_initscr) || defined (__stub___initscr)
+#error found stub for initscr
+#endif
+
+ return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11597: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11600: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11603: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11606: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_func_initscr=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_func_initscr=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:11616: result: $ac_cv_func_initscr" >&5
+echo "${ECHO_T}$ac_cv_func_initscr" >&6
+if test "$ac_cv_func_initscr" = yes; then
+ eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes'
+else
+
+ cf_save_LIBS="$LIBS"
+ echo "$as_me:11623: checking for initscr in -l$cf_nculib_root" >&5
+echo $ECHO_N "checking for initscr in -l$cf_nculib_root... $ECHO_C" >&6
+ LIBS="-l$cf_nculib_root $LIBS"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11627 "configure"
+#include "confdefs.h"
+#include <${cf_cv_ncurses_header:-curses.h}>
+int
+main (void)
+{
+initscr()
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11639: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11642: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11645: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11648: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ echo "$as_me:11650: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes'
+
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+echo "$as_me:11657: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+cf_search=
+cf_library_path_list=""
+if test -n "${LDFLAGS}${LIBS}" ; then
+ for cf_library_path in $LDFLAGS $LIBS
+ do
+ case "$cf_library_path" in
+ (-L*)
+ cf_library_path=`echo ".$cf_library_path" |sed -e 's/^...//' -e 's,/lib$,,'`
+
+test "x$cf_library_path" != "xNONE" && \
+test -d "$cf_library_path" && \
+ {
+ test -n "$verbose" && echo " ... testing for lib-directories under $cf_library_path"
+ test -d "$cf_library_path/lib" && cf_search="$cf_search $cf_library_path/lib"
+ test -d "$cf_library_path/lib/$cf_nculib_root" && cf_search="$cf_search $cf_library_path/lib/$cf_nculib_root"
+ test -d "$cf_library_path/lib/$cf_nculib_root/lib" && cf_search="$cf_search $cf_library_path/lib/$cf_nculib_root/lib"
+ test -d "$cf_library_path/$cf_nculib_root/lib" && cf_search="$cf_search $cf_library_path/$cf_nculib_root/lib"
+ test -d "$cf_library_path/$cf_nculib_root/lib/$cf_nculib_root" && cf_search="$cf_search $cf_library_path/$cf_nculib_root/lib/$cf_nculib_root"
+}
+
+ cf_library_path_list="$cf_library_path_list $cf_search"
+ ;;
+ esac
+ done
+fi
+
+cf_search=
+
+test "x$prefix" != "xNONE" && \
+test -d "$prefix" && \
+ {
+ test -n "$verbose" && echo " ... testing for lib-directories under $prefix"
+ test -d "$prefix/lib" && cf_search="$cf_search $prefix/lib"
+ test -d "$prefix/lib/$cf_nculib_root" && cf_search="$cf_search $prefix/lib/$cf_nculib_root"
+ test -d "$prefix/lib/$cf_nculib_root/lib" && cf_search="$cf_search $prefix/lib/$cf_nculib_root/lib"
+ test -d "$prefix/$cf_nculib_root/lib" && cf_search="$cf_search $prefix/$cf_nculib_root/lib"
+ test -d "$prefix/$cf_nculib_root/lib/$cf_nculib_root" && cf_search="$cf_search $prefix/$cf_nculib_root/lib/$cf_nculib_root"
+}
+
+for cf_subdir_prefix in \
+ /usr \
+ /usr/local \
+ /usr/pkg \
+ /opt \
+ /opt/local \
+ $HOME
+do
+
+test "x$cf_subdir_prefix" != "x$prefix" && \
+test -d "$cf_subdir_prefix" && \
+{ test -z "$prefix" || test "x$prefix" = xNONE || test "x$cf_subdir_prefix" != "x$prefix"; } && {
+ test -n "$verbose" && echo " ... testing for lib-directories under $cf_subdir_prefix"
+ test -d "$cf_subdir_prefix/lib" && cf_search="$cf_search $cf_subdir_prefix/lib"
+ test -d "$cf_subdir_prefix/lib/$cf_nculib_root" && cf_search="$cf_search $cf_subdir_prefix/lib/$cf_nculib_root"
+ test -d "$cf_subdir_prefix/lib/$cf_nculib_root/lib" && cf_search="$cf_search $cf_subdir_prefix/lib/$cf_nculib_root/lib"
+ test -d "$cf_subdir_prefix/$cf_nculib_root/lib" && cf_search="$cf_search $cf_subdir_prefix/$cf_nculib_root/lib"
+ test -d "$cf_subdir_prefix/$cf_nculib_root/lib/$cf_nculib_root" && cf_search="$cf_search $cf_subdir_prefix/$cf_nculib_root/lib/$cf_nculib_root"
+}
+
+done
+
+cf_search="$cf_library_path_list $cf_search"
+
+ for cf_libdir in $cf_search
+ do
+ echo "$as_me:11725: checking for -l$cf_nculib_root in $cf_libdir" >&5
+echo $ECHO_N "checking for -l$cf_nculib_root in $cf_libdir... $ECHO_C" >&6
+ LIBS="-L$cf_libdir -l$cf_nculib_root $cf_save_LIBS"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11729 "configure"
+#include "confdefs.h"
+#include <${cf_cv_ncurses_header:-curses.h}>
+int
+main (void)
+{
+initscr()
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11741: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11744: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11747: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11750: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ echo "$as_me:11752: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes'
+ break
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+echo "$as_me:11759: result: no" >&5
+echo "${ECHO_T}no" >&6
+ LIBS="$cf_save_LIBS"
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+ done
+
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+
+fi
+
+eval 'cf_found_library="$cf_cv_have_lib_'"$cf_nculib_root"\"
+
+if test "$cf_found_library" = no ; then
+ { { echo "$as_me:11774: error: Cannot link $cf_nculib_root library" >&5
+echo "$as_me: error: Cannot link $cf_nculib_root library" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+fi
+
+if test -n "$cf_ncurses_LIBS" ; then
+ echo "$as_me:11782: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5
+echo $ECHO_N "checking if we can link $cf_nculib_root without $cf_ncurses_LIBS... $ECHO_C" >&6
+ cf_ncurses_SAVE="$LIBS"
+ for p in $cf_ncurses_LIBS ; do
+ q=`echo "$LIBS" | sed -e "s%$p %%" -e "s%$p$%%"`
+ if test "$q" != "$LIBS" ; then
+ LIBS="$q"
+ fi
+ done
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11792 "configure"
+#include "confdefs.h"
+#include <${cf_cv_ncurses_header:-curses.h}>
+int
+main (void)
+{
+initscr(); mousemask(0,0); tigetstr((char *)0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11804: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11807: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:11810: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11813: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ echo "$as_me:11815: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+echo "$as_me:11820: result: no" >&5
+echo "${ECHO_T}no" >&6
+ LIBS="$cf_ncurses_SAVE"
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+
+cf_nculib_ROOT=`echo "HAVE_LIB$cf_nculib_root" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
+
+cat >>confdefs.h <<EOF
+#define $cf_nculib_ROOT 1
+EOF
+
+ fi
+else
+ NCURSES_CONFIG=none
+fi
+
+ ;;
+(pdcurses)
+ echo "$as_me:11840: checking for X" >&5
+echo $ECHO_N "checking for X... $ECHO_C" >&6
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+
+fi;
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+ if test "${ac_cv_have_x+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=no ac_x_libraries=no
+rm -fr conftest.dir
+if mkdir conftest.dir; then
+ cd conftest.dir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat >Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval "`${MAKE-make} acfindx 2>/dev/null | grep -v make`"
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl dylib dll; do
+ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
+ test -f "$ac_im_libdir/libX11.$ac_extension"; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case $ac_im_incroot in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
+ esac
+ case $ac_im_usrlibdir in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftest.dir
+fi
+
+# Standard set of common directories for X headers.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ac_x_header_dirs='
+/usr/X11/include
+/usr/X11R7/include
+/usr/X11R6/include
+/usr/X11R5/include
+/usr/X11R4/include
+
+/opt/local/include
+/opt/X11/include
+
+/usr/include/X11
+/usr/include/X11R7
+/usr/include/X11R6
+/usr/include/X11R5
+/usr/include/X11R4
+
+/usr/local/X11/include
+/usr/local/X11R7/include
+/usr/local/X11R6/include
+/usr/local/X11R5/include
+/usr/local/X11R4/include
+
+/usr/local/include/X11
+/usr/local/include/X11R7
+/usr/local/include/X11R6
+/usr/local/include/X11R5
+/usr/local/include/X11R4
+
+/usr/X386/include
+/usr/x386/include
+/usr/XFree86/include/X11
+
+/usr/include
+/usr/local/include
+/usr/unsupported/include
+/usr/athena/include
+/usr/local/x11r5/include
+/usr/lpp/Xamples/include
+
+/usr/openwin/include
+/usr/openwin/share/include'
+
+if test "$ac_x_includes" = no; then
+ # Guess where to find include files, by looking for Intrinsic.h.
+ # First, try using that file with no special directory specified.
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11944 "configure"
+#include "confdefs.h"
+#include <X11/Intrinsic.h>
+_ACEOF
+if { (eval echo "$as_me:11948: \"$ac_cpp "conftest.$ac_ext"\"") >&5
+ (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ $EGREP -v '^ *\+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:11954: \$? = $ac_status" >&5
+ (exit "$ac_status"); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$as_me: failed program was:" >&5
+ cat "conftest.$ac_ext" >&5
+ for ac_dir in $ac_x_header_dirs; do
+ if test -r "$ac_dir/X11/Intrinsic.h"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+done
+fi
+rm -f conftest.err "conftest.$ac_ext"
+fi # $ac_x_includes = no
+
+if test "$ac_x_libraries" = no; then
+ # Check for the libraries.
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS=$LIBS
+ LIBS="-lXt $LIBS"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 11987 "configure"
+#include "confdefs.h"
+#include <X11/Intrinsic.h>
+int
+main (void)
+{
+XtMalloc (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:11999: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12002: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12005: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12008: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ LIBS=$ac_save_LIBS
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+LIBS=$ac_save_LIBS
+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
+do
+ # Don't even attempt the hair of trying to link an X program!
+ for ac_extension in a so sl dylib dll; do
+ if test -r "$ac_dir/libXt.$ac_extension"; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi # $ac_x_libraries = no
+
+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+
+ fi
+ eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+ echo "$as_me:12046: result: $have_x" >&5
+echo "${ECHO_T}$have_x" >&6
+ no_x=yes
+else
+ # If each of the values was on the command line, it overrides each guess.
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ # Update the cache value to reflect the command line values.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$as_me:12056: result: libraries $x_libraries, headers $x_includes" >&5
+echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
+fi
+
+if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+
+cat >>confdefs.h <<\EOF
+#define X_DISPLAY_MISSING 1
+EOF
+
+ X_CFLAGS=
+ X_PRE_LIBS=
+ X_LIBS=
+ X_EXTRA_LIBS=
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ # For Solaris; some versions of Sun CC require a space after -R and
+ # others require no space. Words are not sufficient . . . .
+ case `(uname -sr) 2>/dev/null` in
+ "SunOS 5"*)
+ echo "$as_me:12083: checking whether -R must be followed by a space" >&5
+echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6
+ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12087 "configure"
+#include "confdefs.h"
+
+int
+main (void)
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12099: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12102: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12105: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12108: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_R_nospace=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_R_nospace=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+ if test $ac_R_nospace = yes; then
+ echo "$as_me:12118: result: no" >&5
+echo "${ECHO_T}no" >&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
+ LIBS="$ac_xsave_LIBS -R $x_libraries"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12124 "configure"
+#include "confdefs.h"
+
+int
+main (void)
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12136: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12139: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12142: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12145: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_R_space=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_R_space=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+ if test $ac_R_space = yes; then
+ echo "$as_me:12155: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$as_me:12159: result: neither works" >&5
+echo "${ECHO_T}neither works" >&6
+ fi
+ fi
+ LIBS=$ac_xsave_LIBS
+ esac
+ fi
+
+ # Check for system-dependent libraries X programs must link with.
+ # Do this before checking for the system-independent R6 libraries
+ # (-lICE), since we may need -lsocket or whatever for X linking.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn Johnson says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And Karl Berry says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12179 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char XOpenDisplay ();
+int
+main (void)
+{
+XOpenDisplay ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12198: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12201: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12204: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12207: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+echo "$as_me:12213: checking for dnet_ntoa in -ldnet" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
+if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldnet $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12221 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa ();
+int
+main (void)
+{
+dnet_ntoa ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12240: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12243: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12246: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12249: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_dnet_dnet_ntoa=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_dnet_dnet_ntoa=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12260: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
+if test "$ac_cv_lib_dnet_dnet_ntoa" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo "$as_me:12267: checking for dnet_ntoa in -ldnet_stub" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
+if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldnet_stub $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12275 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa ();
+int
+main (void)
+{
+dnet_ntoa ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12294: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12297: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12300: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12303: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_dnet_stub_dnet_ntoa=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_dnet_stub_dnet_ntoa=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12314: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
+if test "$ac_cv_lib_dnet_stub_dnet_ntoa" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+fi
+
+ fi
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+ LIBS="$ac_xsave_LIBS"
+
+ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
+ # to get the SysV transport functions.
+ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
+ # needs -lnsl.
+ # The nsl library prevents programs from opening the X display
+ # on Irix 5.2, according to T.E. Dickey.
+ # The functions gethostbyname, getservbyname, and inet_addr are
+ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
+ echo "$as_me:12333: checking for gethostbyname" >&5
+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
+if test "${ac_cv_func_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12339 "configure"
+#include "confdefs.h"
+#define gethostbyname autoconf_temporary
+#include <limits.h> /* least-intrusive standard header which defines gcc2 __stub macros */
+#undef gethostbyname
+
+#ifdef __cplusplus
+extern "C"
+#endif
+
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname (void);
+
+int
+main (void)
+{
+
+/* The GNU C library defines stubs for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+#error found stub for gethostbyname
+#endif
+
+ return gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12370: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12373: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12376: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12379: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_func_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_func_gethostbyname=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:12389: result: $ac_cv_func_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
+
+ if test $ac_cv_func_gethostbyname = no; then
+ echo "$as_me:12393: checking for gethostbyname in -lnsl" >&5
+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12401 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main (void)
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12420: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12423: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12426: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12429: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_nsl_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_nsl_gethostbyname=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12440: result: $ac_cv_lib_nsl_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
+if test "$ac_cv_lib_nsl_gethostbyname" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
+fi
+
+ if test $ac_cv_lib_nsl_gethostbyname = no; then
+ echo "$as_me:12447: checking for gethostbyname in -lbsd" >&5
+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbsd $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12455 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main (void)
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12474: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12477: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12480: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12483: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_bsd_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_bsd_gethostbyname=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12494: result: $ac_cv_lib_bsd_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
+if test "$ac_cv_lib_bsd_gethostbyname" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
+fi
+
+ fi
+ fi
+
+ # lieder@skyler.mavd.honeywell.com says without -lsocket,
+ # socket/setsockopt and other routines are undefined under SCO ODT
+ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
+ # on later versions), says Simon Leinen: it contains gethostby*
+ # variants that don't use the nameserver (or something). -lsocket
+ # must be given before -lnsl if both are needed. We assume that
+ # if connect needs -lnsl, so does gethostbyname.
+ echo "$as_me:12510: checking for connect" >&5
+echo $ECHO_N "checking for connect... $ECHO_C" >&6
+if test "${ac_cv_func_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12516 "configure"
+#include "confdefs.h"
+#define connect autoconf_temporary
+#include <limits.h> /* least-intrusive standard header which defines gcc2 __stub macros */
+#undef connect
+
+#ifdef __cplusplus
+extern "C"
+#endif
+
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect (void);
+
+int
+main (void)
+{
+
+/* The GNU C library defines stubs for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+#error found stub for connect
+#endif
+
+ return connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12547: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12550: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12553: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12556: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_func_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_func_connect=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:12566: result: $ac_cv_func_connect" >&5
+echo "${ECHO_T}$ac_cv_func_connect" >&6
+
+ if test $ac_cv_func_connect = no; then
+ echo "$as_me:12570: checking for connect in -lsocket" >&5
+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
+if test "${ac_cv_lib_socket_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12578 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect ();
+int
+main (void)
+{
+connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12597: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12600: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12603: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12606: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_socket_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_socket_connect=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12617: result: $ac_cv_lib_socket_connect" >&5
+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
+if test "$ac_cv_lib_socket_connect" = yes; then
+ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
+fi
+
+ fi
+
+ # Guillermo Gomez says -lposix is necessary on A/UX.
+ echo "$as_me:12626: checking for remove" >&5
+echo $ECHO_N "checking for remove... $ECHO_C" >&6
+if test "${ac_cv_func_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12632 "configure"
+#include "confdefs.h"
+#define remove autoconf_temporary
+#include <limits.h> /* least-intrusive standard header which defines gcc2 __stub macros */
+#undef remove
+
+#ifdef __cplusplus
+extern "C"
+#endif
+
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove (void);
+
+int
+main (void)
+{
+
+/* The GNU C library defines stubs for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_remove) || defined (__stub___remove)
+#error found stub for remove
+#endif
+
+ return remove ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12663: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12666: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12669: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12672: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_func_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_func_remove=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:12682: result: $ac_cv_func_remove" >&5
+echo "${ECHO_T}$ac_cv_func_remove" >&6
+
+ if test $ac_cv_func_remove = no; then
+ echo "$as_me:12686: checking for remove in -lposix" >&5
+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
+if test "${ac_cv_lib_posix_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lposix $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12694 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove ();
+int
+main (void)
+{
+remove ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12713: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12716: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12719: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12722: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_posix_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_posix_remove=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12733: result: $ac_cv_lib_posix_remove" >&5
+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
+if test "$ac_cv_lib_posix_remove" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+fi
+
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ echo "$as_me:12742: checking for shmat" >&5
+echo $ECHO_N "checking for shmat... $ECHO_C" >&6
+if test "${ac_cv_func_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >"conftest.$ac_ext" <<_ACEOF
+#line 12748 "configure"
+#include "confdefs.h"
+#define shmat autoconf_temporary
+#include <limits.h> /* least-intrusive standard header which defines gcc2 __stub macros */
+#undef shmat
+
+#ifdef __cplusplus
+extern "C"
+#endif
+
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat (void);
+
+int
+main (void)
+{
+
+/* The GNU C library defines stubs for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shmat) || defined (__stub___shmat)
+#error found stub for shmat
+#endif
+
+ return shmat ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12779: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12782: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12785: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12788: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_func_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_func_shmat=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:12798: result: $ac_cv_func_shmat" >&5
+echo "${ECHO_T}$ac_cv_func_shmat" >&6
+
+ if test $ac_cv_func_shmat = no; then
+ echo "$as_me:12802: checking for shmat in -lipc" >&5
+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
+if test "${ac_cv_lib_ipc_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lipc $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12810 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat ();
+int
+main (void)
+{
+shmat ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12829: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12832: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12835: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12838: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_ipc_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_ipc_shmat=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12849: result: $ac_cv_lib_ipc_shmat" >&5
+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
+if test "$ac_cv_lib_ipc_shmat" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+fi
+
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+ ac_save_LDFLAGS=$LDFLAGS
+ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # John Interrante, Karl Berry
+ echo "$as_me:12867: checking for IceConnectionNumber in -lICE" >&5
+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 12875 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber ();
+int
+main (void)
+{
+IceConnectionNumber ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:12894: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:12897: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:12900: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:12903: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_ICE_IceConnectionNumber=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_ICE_IceConnectionNumber=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:12914: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
+if test "$ac_cv_lib_ICE_IceConnectionNumber" = yes; then
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+fi
+
+ LDFLAGS=$ac_save_LDFLAGS
+
+fi
+
+cf_x_athena=${cf_x_athena:-Xaw}
+
+echo "$as_me:12926: checking if you want to link with Xaw 3d library" >&5
+echo $ECHO_N "checking if you want to link with Xaw 3d library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-Xaw3d or --without-Xaw3d was given.
+if test "${with_Xaw3d+set}" = set; then
+ withval="$with_Xaw3d"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=Xaw3d
+ echo "$as_me:12937: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:12940: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:12944: checking if you want to link with Xaw 3d xft library" >&5
+echo $ECHO_N "checking if you want to link with Xaw 3d xft library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-Xaw3dxft or --without-Xaw3dxft was given.
+if test "${with_Xaw3dxft+set}" = set; then
+ withval="$with_Xaw3dxft"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=Xaw3dxft
+ echo "$as_me:12955: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:12958: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:12962: checking if you want to link with neXT Athena library" >&5
+echo $ECHO_N "checking if you want to link with neXT Athena library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-neXtaw or --without-neXtaw was given.
+if test "${with_neXtaw+set}" = set; then
+ withval="$with_neXtaw"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=neXtaw
+ echo "$as_me:12973: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:12976: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:12980: checking if you want to link with Athena-Plus library" >&5
+echo $ECHO_N "checking if you want to link with Athena-Plus library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-XawPlus or --without-XawPlus was given.
+if test "${with_XawPlus+set}" = set; then
+ withval="$with_XawPlus"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=XawPlus
+ echo "$as_me:12991: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:12994: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+cf_x_athena_lib=""
+
+if test "$PKG_CONFIG" != none ; then
+ cf_athena_list=
+ test "$cf_x_athena" = Xaw && cf_athena_list="xaw8 xaw7 xaw6"
+ for cf_athena_pkg in \
+ $cf_athena_list \
+ ${cf_x_athena} \
+ ${cf_x_athena}-devel \
+ lib${cf_x_athena} \
+ lib${cf_x_athena}-devel
+ do
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "$cf_athena_pkg"; then
+ test -n "$verbose" && echo " found package $cf_athena_pkg" 1>&6
+
+echo "${as_me:-configure}:13014: testing found package $cf_athena_pkg ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags "$cf_athena_pkg" 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs "$cf_athena_pkg" 2>/dev/null`"
+ test -n "$verbose" && echo " package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:13020: testing package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package $cf_athena_pkg LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:13024: testing package $cf_athena_pkg LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case "$cf_fix_cppflags" in
+(no)
+ case "$cf_add_cflags" in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test "$cf_fix_cppflags" = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}$cf_new_cppflags"
+
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS "
+ EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags"
+
+fi
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in $cf_pkgconfig_libs; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+ cf_x_athena_lib="$cf_pkgconfig_libs"
+
+cf_x_athena_LIBS=`echo "HAVE_LIB_$cf_x_athena" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
+
+ cat >>confdefs.h <<EOF
+#define $cf_x_athena_LIBS 1
+EOF
+
+ for cf_trim_lib in Xmu Xt X11
+ do
+ case "$LIBS" in
+ (*-l$cf_trim_lib\ *-l$cf_trim_lib*)
+ LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'`
+ test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6
+
+echo "${as_me:-configure}:13155: testing ..trimmed $LIBS ..." 1>&5
+
+ ;;
+ esac
+ done
+
+echo "$as_me:13161: checking for usable $cf_x_athena/Xmu package" >&5
+echo $ECHO_N "checking for usable $cf_x_athena/Xmu package... $ECHO_C" >&6
+if test "${cf_cv_xaw_compat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 13168 "configure"
+#include "confdefs.h"
+
+#include <X11/Xmu/CharSet.h>
+
+int
+main (void)
+{
+
+int check = XmuCompareISOLatin1("big", "small");
+(void)check;
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:13185: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:13188: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:13191: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:13194: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ cf_cv_xaw_compat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+cf_cv_xaw_compat=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+fi
+echo "$as_me:13204: result: $cf_cv_xaw_compat" >&5
+echo "${ECHO_T}$cf_cv_xaw_compat" >&6
+
+ if test "$cf_cv_xaw_compat" = no
+ then
+ # workaround for broken ".pc" files...
+ case "$cf_x_athena_lib" in
+ (*-lXmu*)
+ ;;
+ (*)
+ test -n "$verbose" && echo " work around broken package" 1>&6
+
+echo "${as_me:-configure}:13216: testing work around broken package ..." 1>&5
+
+ cf_save_xmu="$LIBS"
+ cf_first_lib=`echo "$cf_save_xmu" | sed -e 's/^ *//' -e 's/ .*//'`
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "xmu"; then
+ test -n "$verbose" && echo " found package xmu" 1>&6
+
+echo "${as_me:-configure}:13224: testing found package xmu ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags "xmu" 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs "xmu" 2>/dev/null`"
+ test -n "$verbose" && echo " package xmu CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:13230: testing package xmu CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package xmu LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:13234: testing package xmu LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case "$cf_fix_cppflags" in
+(no)
+ case "$cf_add_cflags" in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test "$cf_fix_cppflags" = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}$cf_new_cppflags"
+
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS "
+ EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags"
+
+fi
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in $cf_pkgconfig_libs; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+ LIBS="$cf_save_xmu"
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:13354: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib $cf_pkgconfig_libs %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:13359: testing ...after $LIBS ..." 1>&5
+
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:13367: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib -lXmu %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:13372: testing ...after $LIBS ..." 1>&5
+
+fi
+
+ for cf_trim_lib in Xmu Xt X11
+ do
+ case "$LIBS" in
+ (*-l$cf_trim_lib\ *-l$cf_trim_lib*)
+ LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'`
+ test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6
+
+echo "${as_me:-configure}:13383: testing ..trimmed $LIBS ..." 1>&5
+
+ ;;
+ esac
+ done
+
+ ;;
+ esac
+ fi
+
+ break
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ :
+fi
+
+ done
+fi
+
+if test -z "$cf_x_athena_lib" ; then
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "Xext"; then
+ test -n "$verbose" && echo " found package Xext" 1>&6
+
+echo "${as_me:-configure}:13408: testing found package Xext ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags "Xext" 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs "Xext" 2>/dev/null`"
+ test -n "$verbose" && echo " package Xext CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:13414: testing package Xext CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package Xext LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:13418: testing package Xext LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case "$cf_fix_cppflags" in
+(no)
+ case "$cf_add_cflags" in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test "$cf_fix_cppflags" = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS "
+ CPPFLAGS="${CPPFLAGS}$cf_new_cppflags"
+
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS "
+ EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags"
+
+fi
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in $cf_pkgconfig_libs; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+ echo "$as_me:13539: checking for XextCreateExtension in -lXext" >&5
+echo $ECHO_N "checking for XextCreateExtension in -lXext... $ECHO_C" >&6
+if test "${ac_cv_lib_Xext_XextCreateExtension+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lXext $LIBS"
+cat >"conftest.$ac_ext" <<_ACEOF
+#line 13547 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char XextCreateExtension ();
+int
+main (void)
+{
+XextCreateExtension ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f "conftest.$ac_objext" "conftest$ac_exeext"
+if { (eval echo "$as_me:13566: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:13569: \$? = $ac_status" >&5
+ (exit "$ac_status"); } &&
+ { ac_try='test -s "conftest$ac_exeext"'
+ { (eval echo "$as_me:13572: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:13575: \$? = $ac_status" >&5
+ (exit "$ac_status"); }; }; then
+ ac_cv_lib_Xext_XextCreateExtension=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat "conftest.$ac_ext" >&5
+ac_cv_lib_Xext_XextCreateExtension=no
+fi
+rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext"
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:13586: result: $ac_cv_lib_Xext_XextCreateExtension" >&5
+echo "${ECHO_T}$ac_cv_lib_Xext_XextCreateExtension" >&6
+if test "$ac_cv_lib_Xext_XextCreateExtension" = yes; then
+
+cf_add_libs="$LIBS"
+# reverse order
+cf_add_0lib=
+for cf_add_1lib in -lXext; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done
+# filter duplicates
+for cf_add_1lib in $cf_add_0lib; do
+ for cf_add_2lib in $cf_add_libs; do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"; then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs"
+done
+LIBS="$cf_add_libs"
+
+fi
+
+fi
+
+# OSX is schizoid about who owns /usr/X11 (old) versus /opt/X11 (new) (and
+# in some cases has installed dummy files in the former, other cases replaced
+# it with a link to the new location). This complicates the configure script.
+# Check for that pitfall, and recover using pkg-config
+#
+# If none of these are set, the configuration is almost certainly broken.
+if test -z "${X_CFLAGS}${X_PRE_LIBS}${X_LIBS}${X_EXTRA_LIBS}"
+then
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "x11"; then
+ test -n "$verbose" && echo " found package x11" 1>&6
+
+echo "${as_me:-configure}:13622: testing found package x11 ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags "x11" 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs "x11" 2>/dev/null`"
+ test -n "$verbose" && echo " package x11 CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:13628: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package x11 LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:13632: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case "$cf_fix_cppflags" in
+(no)
+ case "$cf_add_cflags" in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test "$cf_fix_cppflags" = yes ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case "$cf_add_cflags" in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+
+ test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags "
+ cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+ (*)
+
+ test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags "
+ cf_new_cflags="${cf_new_cflags}$cf_add_cflags"
+
+ ;;
+ esac
+ ;;
+(yes)
+
+ test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags "
+ cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags"
+
+ cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ test -n "$CFLAGS" && CFLAGS="$CFLAGS "
+ CFLAGS="${CFLAGS}$cf_new_cflags"
+
projects / ncurses.git / blobdiff