The tabs program clears and sets tab-stops on the terminal. This uses
- the terminfo clear_all_tabs and set_tab capabilities. If either is
+ the terminfo clear_all_tabs and set_tab capabilities. If either is
absent, tabs is unable to clear/set tab-stops. The terminal should be
configured to use hard tabs, e.g.,
stty tab0
Like clear(1), tabs writes to the standard output. You can redirect
- the standard output to a file (which prevents tabs from actually chang-
- ing the tabstops), and later cat the file to the screen, setting tab-
- stops at that point.
-
- These are hardware tabs, which cannot be queried rapidly by applica-
- tions running in the terminal, if at all. Curses and other full-screen
- applications may use hardware tabs in optimizing their output to the
- terminal. If the hardware tabstops differ from the information in the
- terminal database, the result is unpredictable. Before running curses
- programs, you should either reset tab-stops to the standard interval
+ the standard output to a file (which prevents tabs from actually
+ changing the tabstops), and later cat the file to the screen, setting
+ tabstops at that point.
+
+ These are hardware tabs, which cannot be queried rapidly by
+ applications running in the terminal, if at all. Curses and other
+ full-screen applications may use hardware tabs in optimizing their
+ output to the terminal. If the hardware tabstops differ from the
+ information in the terminal database, the result is unpredictable.
+ Before running curses programs, you should either reset tab-stops to
+ the standard interval
tabs -8
- or use the reset program, since the normal initialization sequences do
+ or use the reset program, since the normal initialization sequences do
not ensure that tab-stops are reset.
@@ -84,29 +85,29 @@
-Tname
- Tell tabs which terminal type to use. If this option is not
- given, tabs will use the $TERM environment variable. If that is
+ Tell tabs which terminal type to use. If this option is not
+ given, tabs will use the $TERM environment variable. If that is
not set, it will use the ansi+tabs entry.
- -d The debugging option shows a ruler line, followed by two data
- lines. The first data line shows the expected tab-stops marked
- with asterisks. The second data line shows the actual tab-stops,
+ -d The debugging option shows a ruler line, followed by two data
+ lines. The first data line shows the expected tab-stops marked
+ with asterisks. The second data line shows the actual tab-stops,
marked with asterisks.
- -n This option tells tabs to check the options and run any debugging
+ -n This option tells tabs to check the options and run any debugging
option, but not to modify the terminal settings.
-V reports the version of ncurses which was used in this program, and
exits.
The tabs program processes a single list of tab stops. The last option
- to be processed which defines a list is the one that determines the
+ to be processed which defines a list is the one that determines the
list to be processed.
- Use a single number as an option, e.g., "-5" to set tabs at the given
- interval (in this case 1, 6, 11, 16, 21, etc.). Tabs are repeated up
+ Use a single number as an option, e.g., "-5" to set tabs at the given
+ interval (in this case 1, 6, 11, 16, 21, etc.). Tabs are repeated up
to the right margin of the screen.
Use "-0" to clear all tabs.
@@ -115,15 +116,15 @@
- An explicit list can be defined after the options (this does not use a
- "-"). The values in the list must be in increasing numeric order, and
- greater than zero. They are separated by a comma or a blank, for exam-
- ple,
+ An explicit list can be defined after the options (this does not use a
+ "-"). The values in the list must be in increasing numeric order, and
+ greater than zero. They are separated by a comma or a blank, for
+ example,
tabs 1,6,11,16,21
tabs 1 6 11 16 21
- Use a "+" to treat a number as an increment relative to the previous
+ Use a "+" to treat a number as an increment relative to the previous
value, e.g.,
tabs 1,+5,+5,+5,+5
@@ -132,57 +133,102 @@
- X/Open defines several predefined lists of tab stops.
+ POSIX defines several predefined lists of tab stops.
-a Assembler, IBM S/370, first format
+ 1,10,16,36,72
-a2 Assembler, IBM S/370, second format
+ 1,10,16,40,72
-c COBOL, normal format
+ 1,8,12,16,20,55
-c2 COBOL compact format
+ 1,6,10,14,49
-c3 COBOL compact format extended
+ 1,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62,67
-f FORTRAN
+ 1,7,11,15,19,23
-p PL/I
+ 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61
-s SNOBOL
+ 1,10,55
-u UNIVAC 1100 Assembler
+ 1,12,20,44
+
+
+
+ A few terminals provide the capability for changing their left/right
+ margins. The tabs program has an option to use this feature:
+
+ +mmargin
+ The effect depends on whether the terminal has the margin
+ capabilities:
+
+ o If the terminal provides the capability for setting the left
+ margin, tabs uses this, and adjusts the available width for
+ tab-stops.
+
+ o If the terminal does not provide the margin capabilities, tabs
+ imitates the effect, putting the tab stops at the appropriate
+ place on each line. The terminal's left-margin is not
+ modified.
+
+ If the margin parameter is omitted, the default is 10. Use +m0 to
+ reset the left margin, i.e., to the left edge of the terminal's
+ display. Before setting a left-margin, tabs resets the margin to
+ reduce problems which might arise on moving the cursor before the
+ current left-margin.
+
+ When setting or resetting the left-margin, tabs may reset the right-
+ margin.
- IEEEStd1003.1/TheOpenGroupBaseSpecificationsIssue7
+ IEEEStd1003.1/TheOpenGroupBaseSpecificationsIssue7
(POSIX.1-2008) describes a tabs utility. However
- o This standard describes a +m option, to set a terminal's left-mar-
- gin. Very few of the entries in the terminal database provide the
- smgl (set_left_margin) or smglp (set_left_margin_parm) capability
- needed to support the feature.
+ o This standard describes a +m option, to set a terminal's left-
+ margin. Very few of the entries in the terminal database provide
+ the smgl (set_left_margin) or smglp (set_left_margin_parm)
+ capability needed to support the feature.
- o There is no counterpart in X/Open Curses Issue 7 for this utility,
- unlike tput(1).
+ o There is no counterpart in X/Open Curses Issue 7 for this utility,
+ unlike tput(1).
- The -d (debug) and -n (no-op) options are extensions not provided by
+ The -d (debug) and -n (no-op) options are extensions not provided by
other implementations.
- A tabs utility appeared in PWB/Unix 1.0 (1977). There was a reduced
- version of the tabs utility in Unix 7th edition and in 3BSD (1979).
- The latter supported a single "-n" option (to cause the first tab stop
+ A tabs utility appeared in PWB/Unix 1.0 (1977). There was a reduced
+ version of the tabs utility in Unix 7th edition and in 3BSD (1979).
+ The latter supported a single "-n" option (to cause the first tab stop
to be set on the left margin). That option is not documented by POSIX.
- The PWB/Unix tabs utility, which was included in System III (1980),
- used built-in tables rather than the terminal database, to support a
- half-dozen terminal types. It also had built-in logic to support the
- left-margin, as well as a feature for copying the tab settings from a
- file.
-
- Later versions of Unix, e.g., SVr4, added support for the terminal
- database, but kept the tables, as a fallback. In an earlier develop-
- ment effort, the tab-stop initialization provided by tset (1982) and
- incorporated into tput uses the terminal database,
+ The PWB/Unix tabs utility, which was included in System III (1980),
+ used built-in tables rather than the terminal database, to support a
+ half-dozen hardcopy terminal (printer) types. It also had built-in
+ logic to support the left-margin, as well as a feature for copying the
+ tab settings from a file.
+
+ Later versions of Unix, e.g., SVr4, added support for the terminal
+ database, but kept the tables to support the printers. In an earlier
+ development effort, the tab-stop initialization provided by tset (1982)
+ and incorporated into tput uses the terminal database,
+
+ The +m option was documented in the Base Specifications Issue 5
+ (Unix98, 1997), and omitted in Issue 6 (Unix03, 2004) without
+ documenting the rationale, though an introductory comment "and
+ optionallyadjuststhemargin" remains, overlooked in the removal. The
+ documented tabs utility in Issues 6 and later has no mechanism for
+ setting margins. The +m option in this implementation differs from the
+ feature in SVr4 by using terminal capabilities rather than built-in
+ tables.
POSIX documents no limits on the number of tab stops. Documentation
for other implementations states that there is a limit on the number of
@@ -198,15 +244,15 @@
no known historical version of tabs supports the capability of
setting arbitrary tab stops.
- However, the ExplicitLists described in this manual page were imple-
- mented in PWB/Unix. Those provide the capability of setting abitrary
- tab stops.
+ However, the ExplicitLists described in this manual page were
+ implemented in PWB/Unix. Those provide the capability of setting
+ abitrary tab stops.