- The tic command translates a terminfo file from source format into
+ The tic command translates a terminfo file from source format into
compiled format. The compiled format is necessary for use with the
- library routines in ncurses(3x).
+ library routines in ncurses(3X).
- As described in term(5), the database may be either a directory tree
+ As described in term(5), the database may be either a directory tree
(one file per terminal entry) or a hashed database (one record per
- entry). The tic command writes only one type of entry, depending on
+ entry). The tic command writes only one type of entry, depending on
how it was built:
- o For directory trees, the top-level directory, e.g.,
+ o For directory trees, the top-level directory, e.g.,
/usr/share/terminfo, specifies the location of the database.
- o For hashed databases, a filename is needed. If the given file is
+ o For hashed databases, a filename is needed. If the given file is
not found by that name, but can be found by adding the suffix
".db", then that is used.
The default name for the hashed database is the same as the default
directory name (only adding a ".db" suffix).
- In either case (directory or hashed database), tic will create the
+ In either case (directory or hashed database), tic will create the
container if it does not exist. For a directory, this would be the
"terminfo" leaf, versus a "terminfo.db" file.
The results are normally placed in the system terminfo database
- /usr/share/terminfo. The compiled terminal description can be placed
+ /usr/share/terminfo. The compiled terminal description can be placed
in a different terminfo database. There are two ways to achieve this:
- o First, you may override the system default either by using the -o
- option, or by setting the variable TERMINFO in your shell
+ o First, you may override the system default either by using the -o
+ option, or by setting the variable TERMINFO in your shell
environment to a valid database location.
- o Secondly, if tic cannot write in /usr/share/terminfo or the
+ o Secondly, if tic cannot write in /usr/share/terminfo or the
location specified using your TERMINFO variable, it looks for the
- directory $HOME/.terminfo (or hashed database $HOME/.terminfo.db);
+ directory $HOME/.terminfo (or hashed database $HOME/.terminfo.db);
if that location exists, the entry is placed there.
Libraries that read terminfo entries are expected to check in
succession
- o a location specified with the TERMINFO environment variable,
+ o a location specified with the TERMINFO environment variable,
- o$HOME/.terminfo,
+ o$HOME/.terminfo,
- o directories listed in the TERMINFO_DIRS environment variable,
+ o directories listed in the TERMINFO_DIRS environment variable,
- o a compiled-in list of directories (no default value), and
+ o a compiled-in list of directories (no default value), and
- o the system terminfo database (/usr/share/terminfo).
+ o the system terminfo database (/usr/share/terminfo).
This is the same program as infotocap and captoinfo; usually those are
linked to, or copied from this program:
- o When invoked as infotocap, tic sets the -I option.
+ o When invoked as infotocap, tic sets the -I option.
- o When invoked as captoinfo, tic sets the -C option.
+ o When invoked as captoinfo, tic sets the -C option.
- -0 restricts the output to a single line
+ -0 restricts the output to a single line
- -1 restricts the output to a single column
+ -1 restricts the output to a single column
- -a tells tic to retain commented-out capabilities rather than
+ -a tells tic to retain commented-out capabilities rather than
discarding them. Capabilities are commented by prefixing them
- with a period. This sets the -x option, because it treats the
+ with a period. This sets the -x option, because it treats the
commented-out entries as user-defined names. If the source is
termcap, accept the 2-character names required by version 6.
Otherwise these are ignored.
- -C Force source translation to termcap format. Note: this differs
- from the -C option of infocmp(1m) in that it does not merely
+ -C Force source translation to termcap format. Note: this differs
+ from the -C option of infocmp(1M) in that it does not merely
translate capability names, but also translates terminfo strings
to termcap format. Capabilities that are not translatable are
left in the entry under their terminfo names but commented out
with two preceding dots. The actual format used incorporates
some improvements for escaped characters from terminfo format.
- For a stricter BSD-compatible translation, add the -K option.
+ For a stricter BSD-compatible translation, add the -K option.
- If this is combined with -c, tic makes additional checks to
+ If this is combined with -c, tic makes additional checks to
report cases where the terminfo values do not have an exact
equivalent in termcap form. For example:
- osgr usually will not convert, because termcap lacks the
+ osgr usually will not convert, because termcap lacks the
ability to work with more than two parameters, and because
termcap lacks many of the arithmetic/logical operators used
in terminfo.
- o capabilities with more than one delay or with delays before
+ o capabilities with more than one delay or with delays before
the end of the string will not convert completely.
- -c tells tic to only check file for errors, including syntax
- problems and bad use-links. If you specify -C (-I) with this
+ -c tells tic to only check file for errors, including syntax
+ problems and bad use-links. If you specify -C (-I) with this
option, the code will print warnings about entries which, after
use resolution, are more than 1023 (4096) bytes long. Due to a
fixed buffer length in older termcap libraries, as well as buggy
@@ -157,58 +157,58 @@
terminfo), these entries may cause core dumps with other
implementations.
- tic checks string capabilities to ensure that those with
+ tic checks string capabilities to ensure that those with
parameters will be valid expressions. It does this check only
for the predefined string capabilities; those which are defined
- with the -x option are ignored.
+ with the -x option are ignored.
- -D tells tic to print the database locations that it knows about,
+ -D tells tic to print the database locations that it knows about,
and exit. The first location shown is the one to which it would
- write compiled terminal descriptions. If tic is not able to
+ write compiled terminal descriptions. If tic is not able to
find a writable database location according to the rules
summarized above, it will print a diagnostic and exit with an
error rather than printing a list of database locations.
- -enames
+ -enames
Limit writes and translations to the following comma-separated
list of terminals. If any name or alias of a terminal matches
one of the names in the list, the entry will be written or
translated as normal. Otherwise no output will be generated for
it. The option value is interpreted as a file containing the
list if it contains a '/'. (Note: depending on how tic was
- compiled, this option may require -I or -C.)
+ compiled, this option may require -I or -C.)
- -f Display complex terminfo strings which contain
+ -f Display complex terminfo strings which contain
if/then/else/endif expressions indented for readability.
- -G Display constant literals in decimal form rather than their
+ -G Display constant literals in decimal form rather than their
character equivalents.
- -g Display constant character literals in quoted form rather than
+ -g Display constant character literals in quoted form rather than
their decimal equivalents.
- -I Force source translation to terminfo format.
+ -I Force source translation to terminfo format.
- -K Suppress some longstanding ncurses extensions to termcap format,
+ -K Suppress some longstanding ncurses extensions to termcap format,
e.g., "\s" for space.
- -L Force source translation to terminfo format using the long C
- variable names listed in <term.h>
+ -L Force source translation to terminfo format using the long C
+ variable names listed in <term.h>
- -N Disable smart defaults. Normally, when translating from termcap
+ -N Disable smart defaults. Normally, when translating from termcap
to terminfo, the compiler makes a number of assumptions about
- the defaults of string capabilities reset1_string,
- carriage_return, cursor_left, cursor_down, scroll_forward, tab,
- newline, key_backspace, key_left, and key_down, then attempts to
+ the defaults of string capabilities reset1_string,
+ carriage_return, cursor_left, cursor_down, scroll_forward, tab,
+ newline, key_backspace, key_left, and key_down, then attempts to
use obsolete termcap capabilities to deduce correct values. It
also normally suppresses output of obsolete termcap capabilities
- such as bs. This option forces a more literal translation that
+ such as bs. This option forces a more literal translation that
also preserves the obsolete capabilities.
- -odir Write compiled entries to given database location. Overrides
+ -odir Write compiled entries to given database location. Overrides
the TERMINFO environment variable.
- -Qn Rather than show source in terminfo (text) format, print the
+ -Qn Rather than show source in terminfo (text) format, print the
compiled (binary) format in hexadecimal or base64 form,
depending on the option's value:
@@ -218,52 +218,52 @@
3 hexadecimal and base64
- -q Suppress comments and blank lines when showing translated
+ -q Suppress comments and blank lines when showing translated
source.
- -Rsubset
+ -Rsubset
Restrict output to a given subset. This option is for use with
archaic versions of terminfo like those on SVr1, Ultrix, or
HP/UX that do not support the full set of SVR4/XSI Curses
terminfo; and outright broken ports like AIX 3.x that have their
own extensions incompatible with SVr4/XSI. Available subsets
- are "SVr1", "Ultrix", "HP", "BSD" and "AIX"; see terminfo(5) for
+ are "SVr1", "Ultrix", "HP", "BSD" and "AIX"; see terminfo(5) for
details.
- -r Force entry resolution (so there are no remaining tc
+ -r Force entry resolution (so there are no remaining tc
capabilities) even when doing translation to termcap format.
This may be needed if you are preparing a termcap file for a
termcap library (such as GNU termcap through version 1.3 or BSD
termcap through 4.3BSD) that does not handle multiple tc
capabilities per entry.
- -s Summarize the compile by showing the database location into
+ -s Summarize the compile by showing the database location into
which entries are written, and the number of entries which are
compiled.
- -T eliminates size-restrictions on the generated text. This is
+ -T eliminates size-restrictions on the generated text. This is
mainly useful for testing and analysis, since the compiled
descriptions are limited (e.g., 1023 for termcap, 4096 for
terminfo).
- -t tells tic to discard commented-out capabilities. Normally when
+ -t tells tic to discard commented-out capabilities. Normally when
translating from terminfo to termcap, untranslatable
capabilities are commented-out.
- -U tells tic to not post-process the data after parsing the source
+ -U tells tic to not post-process the data after parsing the source
file. Normally, it infers data which is commonly missing in older
terminfo data, or in termcaps.
- -V reports the version of ncurses which was used in this program, and
+ -V reports the version of ncurses which was used in this program, and
exits.
- -vn specifies that (verbose) output be written to standard error trace
- information showing tic's progress.
+ -vn specifies that (verbose) output be written to standard error trace
+ information showing tic's progress.
- The optional parameter n is a number from 1 to 10, inclusive,
+ The optional parameter n is a number from 1 to 10, inclusive,
indicating the desired level of detail of information. If ncurses
is built without tracing support, the optional parameter is
- ignored. If n is omitted, the default level is 1. If n is
+ ignored. If n is omitted, the default level is 1. If n is
specified and greater than 1, the level of detail is increased.
The debug flag levels are as follows:
@@ -282,19 +282,19 @@
9 All values computed in construction of the hash table
- If the debug level n is not given, it is taken to be one.
+ If the debug level n is not given, it is taken to be one.
- -W By itself, the -w option will not force long strings to be
- wrapped. Use the -W option to do this.
+ -W By itself, the -w option will not force long strings to be
+ wrapped. Use the -W option to do this.
- If you specify both -f and -W options, the latter is ignored when
- -f has already split the line.
+ If you specify both -f and -W options, the latter is ignored when
+ -f has already split the line.
- -wn specifies the width of the output. The parameter is optional. If
+ -wn specifies the width of the output. The parameter is optional. If
it is omitted, it defaults to 60.
- -x Treat unknown capabilities as user-defined (see user_caps(5)).
- That is, if you supply a capability name which tic does not
+ -x Treat unknown capabilities as user-defined (see user_caps(5)).
+ That is, if you supply a capability name which tic does not
recognize, it will infer its type (boolean, number or string) from
the syntax and make an extended table entry for that. User-
defined capability strings whose name begins with "k" are treated
@@ -302,29 +302,29 @@
- file contains one or more terminfo terminal descriptions in source
- format [see terminfo(5)]. Each description in the file
+ file contains one or more terminfo terminal descriptions in source
+ format [see terminfo(5)]. Each description in the file
describes the capabilities of a particular terminal.
- If file is "-", then the data is read from the standard input.
- The file parameter may also be the path of a character-device.
+ If file is "-", then the data is read from the standard input.
+ The file parameter may also be the path of a character-device.
- All but one of the capabilities recognized by tic are documented in
- terminfo(5). The exception is the use capability.
+ All but one of the capabilities recognized by tic are documented in
+ terminfo(5). The exception is the use capability.
- When a use=entry-name field is discovered in a terminal entry currently
- being compiled, tic reads in the binary from /usr/share/terminfo to
- complete the entry. (Entries created from file will be used first.
- tic duplicates the capabilities in entry-name for the current entry,
+ When a use=entry-name field is discovered in a terminal entry currently
+ being compiled, tic reads in the binary from /usr/share/terminfo to
+ complete the entry. (Entries created from file will be used first.
+ tic duplicates the capabilities in entry-name for the current entry,
with the exception of those capabilities that explicitly are defined in
the current entry.
- When an entry, e.g., entry_name_1, contains a use=entry_name_2 field,
- any canceled capabilities in entry_name_2 must also appear in
- entry_name_1 before use= for these capabilities to be canceled in
- entry_name_1.
+ When an entry, e.g., entry_name_1, contains a use=entry_name_2 field,
+ any canceled capabilities in entry_name_2 must also appear in
+ entry_name_1 before use= for these capabilities to be canceled in
+ entry_name_1.
Total compiled entries cannot exceed 4096 bytes. The name field cannot
exceed 512 bytes. Terminal names exceeding the maximum alias length
@@ -334,54 +334,54 @@
- System V Release 2 provided a tic utility. It accepted a single
- option: -v (optionally followed by a number). According to Ross
- Ridge's comment in mytinfo, this version of tic was unable to represent
+ System V Release 2 provided a tic utility. It accepted a single
+ option: -v (optionally followed by a number). According to Ross
+ Ridge's comment in mytinfo, this version of tic was unable to represent
cancelled capabilities.
- System V Release 3 provided a different tic utility, written by Pavel
- Curtis, (originally named "compile" in pcurses). This added an option
- -c to check the file for errors, with the caveat that errors in "use="
+ System V Release 3 provided a different tic utility, written by Pavel
+ Curtis, (originally named "compile" in pcurses). This added an option
+ -c to check the file for errors, with the caveat that errors in "use="
links would not be reported. System V Release 3 documented a few
- warning messages which did not appear in pcurses. While the program
+ warning messages which did not appear in pcurses. While the program
itself was changed little as development continued with System V
- Release 4, the table of capabilities grew from 180 (pcurses) to 464
+ Release 4, the table of capabilities grew from 180 (pcurses) to 464
(Solaris).
In early development of ncurses (1993), Zeyd Ben-Halim used the table
- from mytinfo to extend the pcurses table to 469 capabilities (456
+ from mytinfo to extend the pcurses table to 469 capabilities (456
matched SVr4, 8 were only in SVr4, 13 were not in SVr4). Of those 13,
11 were ultimately discarded (perhaps to match the draft of X/Open
- Curses). The exceptions were memory_lock_above and memory_unlock (see
- user_caps(5)).
+ Curses). The exceptions were memory_lock_above and memory_unlock (see
+ user_caps(5)).
- Eric Raymond incorporated parts of mytinfo into ncurses to implement
+ Eric Raymond incorporated parts of mytinfo into ncurses to implement
the termcap-to-terminfo source conversion, and extended that to begin
development of the corresponding terminfo-to-termcap source conversion,
Thomas Dickey completed that development over the course of several
years.
- In 1999, Thomas Dickey added the -x option to support user-defined
+ In 1999, Thomas Dickey added the -x option to support user-defined
capabilities.
- In 2010, Roy Marples provided a tic program and terminfo library for
+ In 2010, Roy Marples provided a tic program and terminfo library for
NetBSD. That implementation adapts several features from ncurses,
- including tic's -x option.
+ including tic's -x option.
- The -c option tells tic to check for problems in the terminfo source
+ The -c option tells tic to check for problems in the terminfo source
file. Continued development provides additional checks:
- opcurses had 8 warnings
+ opcurses had 8 warnings
- o ncurses in 1996 had 16 warnings
+ o ncurses in 1996 had 16 warnings
- o Solaris (SVr4) curses has 28 warnings
+ o Solaris (SVr4) curses has 28 warnings
- o NetBSD tic in 2019 has 19 warnings.
+ o NetBSD tic in 2019 has 19 warnings.
- o ncurses in 2019 has 96 warnings
+ o ncurses in 2019 has 96 warnings
- The checking done in ncurses' tic helps with the conversion to termcap,
+ The checking done in ncurses' tic helps with the conversion to termcap,
as well as pointing out errors and inconsistencies. It is also used to
ensure consistency with the user-defined capabilities. There are 527
distinct capabilities in ncurses' terminal database; 128 of those are
@@ -389,20 +389,20 @@
- X/Open Curses, Issue 7 (2009) provides a brief description of tic. It
- lists one option: -c. The omission of -v is unexpected. The change
+ X/Open Curses, Issue 7 (2009) provides a brief description of tic. It
+ lists one option: -c. The omission of -v is unexpected. The change
history states that the description is derived from True64 UNIX.
- According to its manual pages, that system also supported the -v
+ According to its manual pages, that system also supported the -v
option.
Shortly after Issue 7 was released, Tru64 was discontinued. As of
- 2019, the surviving implementations of tic are SVr4 (AIX, HP-UX and
- Solaris), ncurses and NetBSD curses. The SVr4 tic programs all support
- the -v option. The NetBSD tic program follows X/Open's documentation,
- omitting the -v option.
+ 2019, the surviving implementations of tic are SVr4 (AIX, HP-UX and
+ Solaris), ncurses and NetBSD curses. The SVr4 tic programs all support
+ the -v option. The NetBSD tic program follows X/Open's documentation,
+ omitting the -v option.
- The X/Open rationale states that some implementations of tic read
- terminal descriptions from the standard input if the file parameter is
+ The X/Open rationale states that some implementations of tic read
+ terminal descriptions from the standard input if the file parameter is
omitted. None of these implementations do that. Further, it comments
that some may choose to read from "./terminfo.src" but that is
obsolescent behavior from SVr2, and is not (for example) a documented
@@ -410,58 +410,58 @@
- There is some evidence that historic tic implementations treated
+ There is some evidence that historic tic implementations treated
description fields with no whitespace in them as additional aliases or
- short names. This tic does not do that, but it does warn when
+ short names. This tic does not do that, but it does warn when
description fields may be treated that way and check them for dangerous
characters.
- Unlike the SVr4 tic command, this implementation can actually compile
+ Unlike the SVr4 tic command, this implementation can actually compile
termcap sources. In fact, entries in terminfo and termcap syntax can
- be mixed in a single source file. See terminfo(5) for the list of
+ be mixed in a single source file. See terminfo(5) for the list of
termcap names taken to be equivalent to terminfo names.
- The SVr4 manual pages are not clear on the resolution rules for use
- capabilities. This implementation of tic will find use targets
+ The SVr4 manual pages are not clear on the resolution rules for use
+ capabilities. This implementation of tic will find use targets
anywhere in the source file, or anywhere in the file tree rooted at
- TERMINFO (if TERMINFO is defined), or in the user's $HOME/.terminfo
+ TERMINFO (if TERMINFO is defined), or in the user's $HOME/.terminfo
database (if it exists), or (finally) anywhere in the system's file
tree of compiled entries.
- The error messages from this tic have the same format as GNU C error
+ The error messages from this tic have the same format as GNU C error
messages, and can be parsed by GNU Emacs's compile facility.
- Aside from -c and -v, options are not portable:
+ Aside from -c and -v, options are not portable:
- o Most of tic's options are not supported by SVr4 tic:
+ o Most of tic's options are not supported by SVr4 tic:
- -0-1-C-G-I-N-R-T-V-a-e-f-g-o-r-s-t-x
+ -0-1-C-G-I-N-R-T-V-a-e-f-g-o-r-s-t-x
- o The NetBSD tic supports a few of the ncurses options
+ o The NetBSD tic supports a few of the ncurses options
- -a-o-x
+ -a-o-x
- and adds -S (a feature which does the same thing as infocmp's -e
- and -E options).
+ and adds -S (a feature which does the same thing as infocmp's -e
+ and -E options).
- The SVr4 -c mode does not report bad "use=" links.
+ The SVr4 -c mode does not report bad "use=" links.
System V does not compile entries to or read entries from your
- $HOME/.terminfo database unless TERMINFO is explicitly set to it.
+ $HOME/.terminfo database unless TERMINFO is explicitly set to it.