The tput utility uses the terminfo database to make the
values of terminal-dependent capabilities and information
- available to the shell (see sh(1)), to initialize or reset
+ available to the shell (see sh(1)), to initialize or reset
the terminal, or return the long name of the requested
terminal type. The result depends upon the capability's
type:
- string
- tput writes the string to the standard output.
- No trailing newline is supplied.
+ string
+ tput writes the string to the standard output. No
+ trailing newline is supplied.
- integer
- tput writes the decimal value to the standard
- output, with a trailing newline.
+ integer
+ tput writes the decimal value to the standard out-
+ put, with a trailing newline.
- boolean
- tput simply sets the exit code (0 for TRUE if
- the terminal has the capability, 1 for FALSE
- if it does not), and writes nothing to the
- standard output.
+ boolean
+ tput simply sets the exit code (0 for TRUE if the
+ terminal has the capability, 1 for FALSE if it
+ does not), and writes nothing to the standard out-
+ put.
Before using a value returned on the standard output, the
application should test the exit code (e.g., $?, see
- sh(1)) to be sure it is 0. (See the EXITCODES and DIAG-
+ sh(1)) to be sure it is 0. (See the EXITCODES and DIAG-NOSTICS sections.) For a complete list of capabilities
and the capname associated with each, see terminfo(5).
+
+
-Ttype indicates the type of terminal. Normally this
option is unnecessary, because the default is taken
from the environment variable TERM. If -T is spec-
ified, then the shell variables LINES and COLUMNS
- will be ignored,and the operating system will not
- be queried for the actual screen size.
+ will also be ignored.
+
+ -S allows more than one capability per invocation of
+ tput. The capabilities must be passed to tput from
+ the standard input instead of from the command line
+ (see example). Only one capname is allowed per
+ line. The -S option changes the meaning of the 0
+ and 1 boolean and string exit codes (see the EXIT
+ CODES section).
+
+ Again, tput uses a table and the presence of param-
+ eters in its input to decide whether to use
+ tparm(3x), and how to interpret the parameters.
+
+ -V reports the version of ncurses which was used in
+ this program, and exits.
+
+
capname
indicates the capability from the terminfo data-
base. When termcap support is compiled in, the
termcap name for the capability is also accepted.
- parms If the capability is a string that takes parame-
- ters, the arguments parms will be instantiated into
- the string.
+ If the capability is a string that takes parame-
+ ters, the arguments following the capability will
+ be used as parameters for the string.
Most parameters are numbers. Only a few terminfo
capabilities require string parameters; tput uses a
table to decide which to pass as strings. Normally
- tput uses tparm (3x) to perform the substitution.
+ tput uses tparm(3x) to perform the substitution.
If no parameters are given for the capability, tput
writes the string without performing the substitu-
tion.
- -S allows more than one capability per invocation of
- tput. The capabilities must be passed to tput from
- the standard input instead of from the command line
- (see example). Only one capname is allowed per
- line. The -S option changes the meaning of the 0
- and 1 boolean and string exit codes (see the EXIT
- CODES section).
-
- Again, tput uses a table and the presence of param-
- eters in its input to decide whether to use tparm
- (3x), and how to interpret the parameters.
-
- -V reports the version of ncurses which was used in
- this program, and exits.
-
- init If the terminfo database is present and an entry
+ init If the terminfo database is present and an entry
for the user's terminal exists (see -Ttype, above),
the following will occur:
- (1) if present, the terminal's initialization
- strings will be output as detailed in the
- terminfo(5) section on TabsandInitializa-
- tion,
+ (1) if present, the terminal's initialization
+ strings will be output as detailed in the ter-
+ minfo(5) section on TabsandInitialization,
- (2) any delays (e.g., newline) specified in the
- entry will be set in the tty driver,
+ (2) any delays (e.g., newline) specified in the
+ entry will be set in the tty driver,
- (3) tabs expansion will be turned on or off
- according to the specification in the entry,
- and
+ (3) tabs expansion will be turned on or off
+ according to the specification in the entry,
+ and
- (4) if tabs are not expanded, standard tabs will
- be set (every 8 spaces).
+ (4) if tabs are not expanded, standard tabs will
+ be set (every 8 spaces).
If an entry does not contain the information needed
- for any of the four above activities, that activity
- will silently be skipped.
+ for any of these activities, that activity will
+ silently be skipped.
reset Instead of putting out initialization strings, the
terminal's reset strings will be output if present
@@ -168,22 +168,48 @@
the terminal's description in the terminfo database
[see term(5)].
+
+
+ tput handles the clear, init and reset commands specially:
+ it allows for the possibility that it is invoked by a link
+ with those names.
+
If tput is invoked by a link named reset, this has the
- same effect as tputreset. See tset for comparison, which
- has similar behavior.
+ same effect as tputreset. The tset(1) utility also
+ treats a link named reset specially.
+ Before ncurses 6.1, the two utilities were different from
+ each other:
-
-
EXAMPLES
+ otset utility reset the terminal modes and special
+ characters (not done with tput).
+
+ o On the other hand, tset's repertoire of terminal capa-
+ bilities for resetting the terminal was more limited,
+ i.e., only reset_1string, reset_2string and reset_file
+ in contrast to the tab-stops and margins which are set
+ by this utility.
+
+ o The reset program is usually an alias for tset,
+ because of this difference with resetting terminal
+ modes and special characters.
+
+ If tput is invoked by a link named init, this has the same
+ effect as tputinit. Again, you are less likely to use
+ that link because another program named init has a more
+ well-established use.
+
+
+
tputinit
Initialize the terminal according to the type of ter-
- minal in the environmental variable TERM. This com-
- mand should be included in everyone's .profile after
+ minal in the environmental variable TERM. This com-
+ mand should be included in everyone's .profile after
the environmental variable TERM has been exported, as
- illustrated on the profile(5) manual page.
+ illustrated on the profile(5) manual page.
tput-T5620reset
- Reset an AT&T 5620 terminal, overriding the type of
+ Reset an AT&T 5620 terminal, overriding the type of
terminal in the environmental variable TERM.
tputcup00
@@ -204,16 +230,16 @@
bold=`tputsmso`offbold=`tputrmso`
Set the shell variables bold, to begin stand-out mode
sequence, and offbold, to end standout mode sequence,
- for the current terminal. This might be followed by
- a prompt: echo"${bold}Pleasetypeinyourname:
+ for the current terminal. This might be followed by
+ a prompt: echo"${bold}Pleasetypeinyourname:${offbold}\c"tputhc
- Set exit code to indicate if the current terminal is
+ Set exit code to indicate if the current terminal is
a hard copy terminal.
tputcup234
- Send the sequence to move the cursor to row 23, col-
+ Send the sequence to move the cursor to row 23, col-
umn 4.
tputcup
@@ -221,8 +247,8 @@
parameters substituted.
tputlongname
- Print the long name from the terminfo database for
- the type of terminal specified in the environmental
+ Print the long name from the terminfo database for
+ the type of terminal specified in the environmental
variable TERM.
tput-S<<!
@@ -231,73 +257,68 @@
>bold>!
- This example shows tput processing several capabili-
- ties in one invocation. It clears the screen, moves
- the cursor to position 10, 10 and turns on bold
- (extra bright) mode. The list is terminated by an
+ This example shows tput processing several capabili-
+ ties in one invocation. It clears the screen, moves
+ the cursor to position 10, 10 and turns on bold
+ (extra bright) mode. The list is terminated by an
exclamation mark (!) on a line by itself.
-
/usr/share/terminfo
compiled terminal description database
/usr/share/tabset/*
tab settings for some terminals, in a format appro-
- priate to be output to the terminal (escape
- sequences that set margins and tabs); for more
- information, see the "Tabs and Initialization" sec-
+ priate to be output to the terminal (escape
+ sequences that set margins and tabs); for more
+ information, see the TabsandInitialization, sec-
tion of terminfo(5)
-
If the -S option is used, tput checks for errors from each
- line, and if any errors are found, will set the exit code
- to 4 plus the number of lines with errors. If no errors
- are found, the exit code is 0. No indication of which
+ line, and if any errors are found, will set the exit code
+ to 4 plus the number of lines with errors. If no errors
+ are found, the exit code is 0. No indication of which
line failed can be given so exit code 1 will never appear.
- Exit codes 2, 3, and 4 retain their usual interpretation.
+ Exit codes 2, 3, and 4 retain their usual interpretation.
If the -S option is not used, the exit code depends on the
type of capname:
- boolean
- a value of 0 is set for TRUE and 1 for FALSE.
-
- string a value of 0 is set if the capname is defined
- for this terminal type (the value of capname
- is returned on standard output); a value of 1
- is set if capname is not defined for this ter-
- minal type (nothing is written to standard
- output).
-
- integer
- a value of 0 is always set, whether or not
- capname is defined for this terminal type. To
- determine if capname is defined for this ter-
- minal type, the user must test the value writ-
- ten to standard output. A value of -1 means
- that capname is not defined for this terminal
- type.
-
- otherreset or init may fail to find their respec-
- tive files. In that case, the exit code is
- set to 4 + errno.
-
- Any other exit code indicates an error; see the DIAGNOS-
+ boolean
+ a value of 0 is set for TRUE and 1 for FALSE.
+
+ string a value of 0 is set if the capname is defined
+ for this terminal type (the value of capname is
+ returned on standard output); a value of 1 is
+ set if capname is not defined for this terminal
+ type (nothing is written to standard output).
+
+ integer
+ a value of 0 is always set, whether or not cap-
+ name is defined for this terminal type. To
+ determine if capname is defined for this termi-
+ nal type, the user must test the value written
+ to standard output. A value of -1 means that
+ capname is not defined for this terminal type.
+
+ otherreset or init may fail to find their respective
+ files. In that case, the exit code is set to 4
+ + errno.
+
+ Any other exit code indicates an error; see the DIAGNOS-
TICS section.
-
tput prints the following error messages and sets the cor-
responding exit codes.
exit code error message
---------------------------------------------------------------------
- 0 (capname is a numeric variable that is not specified in
- the terminfo(5) database for this terminal type, e.g.
+ 0 (capname is a numeric variable that is not specified in
+ the terminfo(5) database for this terminal type, e.g.
tput-T450lines and tput-T2621xmc)
1 no error message is printed, see the EXITCODES section.
2 usage error
@@ -307,36 +328,144 @@
---------------------------------------------------------------------
-
+ The tput command was begun by Bill Joy in 1980. The ini-
+ tial version only cleared the screen.
+
+ AT&T System V provided a different tput command, whose
+ init and reset subcommands (more than half the program)
+ were incorporated from the reset feature of BSD tset writ-
+ ten by Eric Allman. Later the corresponding source code
+ for reset was removed from the BSD tset (in June 1993,
+ released in 4.4BSD-Lite a year later).
+
+ Keith Bostic replaced the BSD tput command in 1989 with a
+ new implementation based on the AT&T System V program
+ tput. Like the AT&T program, Bostic's version accepted
+ some parameters named for terminfocapabilities (clear,
+ init, longname and reset). However (because he had only
+ termcap available), it accepted termcapnames for other
+ capabilities. Also, Bostic's BSD tput did not modify the
+ terminal I/O modes as the earlier BSD tset had done.
+
+ At the same time, Bostic added a shell script named
+ "clear", which used tput to clear the screen.
+
+ Both of these appeared in 4.4BSD, becoming the "modern"
+ BSD implementation of tput.
+
+
+
+ This implementation of tput differs from AT&T tput in two
+ important areas:
+
+ otputcapname writes to the standard output. That need
+ not be a regular terminal. However, the subcommands
+ which manipulate terminal modes may not use the stan-
+ dard output.
+
+ The AT&T implementation's init and reset commands use
+ the BSD (4.1c) tset source, which manipulates terminal
+ modes. It successively tries standard output, stan-
+ dard error, standard input before falling back to
+ "/dev/tty" and finally just assumes a 1200Bd terminal.
+ When updating terminal modes, it ignores errors.
+
+ Until changes made after ncurses 6.0, tput did not
+ modify terminal modes. tput now uses a similar
+ scheme, using functions shared with tset (and ulti-
+ mately based on the 4.4BSD tset). If it is not able
+ to open a terminal, e.g., when running in cron, tput
+ will return an error.
+
+ o AT&T tput guesses the type of its capname operands by
+ seeing if all of the characters are numeric, or not.
+
+ Most implementations which provide support for capname
+ operands use the tparm function to expand parameters
+ in it. That function expects a mixture of numeric and
+ string parameters, requiring tput to know which type
+ to use.
+
+ This implementation uses a table to determine the
+ parameter types for the standard capname operands, and
+ an internal library function to analyze nonstandard
+ capname operands.
+
The longname and -S options, and the parameter-substitu-
- tion features used in the cup example, are not supported
- in BSD curses or in AT&T/USL curses before SVr4.
+ tion features used in the cup example, were not supported
+ in BSD curses before 4.3reno (1989) or in AT&T/USL curses
+ before SVr4 (1988).
- X/Open documents only the operands for clear, init and
- reset. In this implementation, clear is part of the cap-
- name support. Other implementations of tput on SVr4-based
- systems such as Solaris, IRIX64 and HPUX as well as others
- such as AIX and Tru64 provide support for capname oper-
- ands. A few platforms such as FreeBSD and NetBSD recog-
- nize termcap names rather than terminfo capability names
- in their respective tput commands.
+ IEEE Std 1003.1/The Open Group Base Specifications Issue
+ 7 (POSIX.1-2008) documents only the operands for clear,
+ init and reset. There are a few interesting observations
+ to make regarding that:
+ o In this implementation, clear is part of the capname
+ support. The others (init and longname) do not corre-
+ spond to terminal capabilities.
-
-
SEE ALSO
- clear(1), stty(1), tabs(1), terminfo(5).
+ o Other implementations of tput on SVr4-based systems
+ such as Solaris, IRIX64 and HPUX as well as others
+ such as AIX and Tru64 provide support for capname op-
+ erands.
+
+ o A few platforms such as FreeBSD recognize termcap
+ names rather than terminfo capability names in their
+ respective tput commands. Since 2010, NetBSD's tput
+ uses terminfo names. Before that, it (like FreeBSD)
+ recognized termcap names.
+
+ Because (apparently) all of the certified Unix systems
+ support the full set of capability names, the reasoning
+ for documenting only a few may not be apparent.
+
+ o X/Open Curses Issue 7 documents tput differently, with
+ capname and the other features used in this implemen-
+ tation.
+
+ o That is, there are two standards for tput: POSIX (a
+ subset) and X/Open Curses (the full implementation).
+ POSIX documents a subset to avoid the complication of
+ including X/Open Curses and the terminal capabilities
+ database.
+
+ o While it is certainly possible to write a tput program
+ without using curses, none of the systems which have a
+ curses implementation provide a tput utility which
+ does not provide the capname feature.
+
+
+