1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
4 * DO NOT EDIT THIS FILE BY HAND!
5 * It is generated from terminfo.head, Caps, and terminfo.tail.
6 * Note: this must be run through tbl before nroff.
7 * The magic cookie on the first line triggers this under some man programs.
8 ****************************************************************************
9 * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
11 * Permission is hereby granted, free of charge, to any person obtaining a *
12 * copy of this software and associated documentation files (the *
13 * "Software"), to deal in the Software without restriction, including *
14 * without limitation the rights to use, copy, modify, merge, publish, *
15 * distribute, distribute with modifications, sublicense, and/or sell *
16 * copies of the Software, and to permit persons to whom the Software is *
17 * furnished to do so, subject to the following conditions: *
19 * The above copyright notice and this permission notice shall be included *
20 * in all copies or substantial portions of the Software. *
22 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
23 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
24 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
25 * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
26 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
27 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
28 * THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
30 * Except as contained in this notice, the name(s) of the above copyright *
31 * holders shall not be used in advertising or otherwise to promote the *
32 * sale, use or other dealings in this Software without prior written *
34 ****************************************************************************
35 * @Id: terminfo.head,v 1.20 2013/03/02 23:52:37 tom Exp @
36 * Head of terminfo man page ends here
37 * @Id: terminfo.tail,v 1.61 2013/03/03 00:06:39 tom Exp @
38 * Beginning of terminfo.tail file
39 * This file is part of ncurses.
40 * See "terminfo.head" for copyright.
49 <TITLE>terminfo 5 File Formats</TITLE>
50 <link rev=made href="mailto:bug-ncurses@gnu.org">
51 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
54 <H1>terminfo 5 File Formats</H1>
57 <!-- Manpage converted by man2html 3.0.1 -->
58 <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> File Formats <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
65 terminfo - terminal capability data base
69 <H2>SYNOPSIS</H2><PRE>
70 /usr/share/terminfo/*/*
74 <H2>DESCRIPTION</H2><PRE>
75 <EM>Terminfo</EM> is a data base describing terminals, used by
76 screen-oriented programs such as <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>, <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG> and
77 libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. <EM>Terminfo</EM> describes termi-
78 nals by giving a set of capabilities which they have, by
79 specifying how to perform screen operations, and by speci-
80 fying padding requirements and initialization sequences.
81 This describes <STRONG>ncurses</STRONG> version 5.9 (patch 20130309).
83 Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
84 fields (embedded commas may be escaped with a backslash or
85 notated as \054). White space after the `,' separator is
86 ignored. The first entry for each terminal gives the
87 names which are known for the terminal, separated by `|'
88 characters. The first name given is the most common
89 abbreviation for the terminal, the last name given should
90 be a long name fully identifying the terminal, and all
91 others are understood as synonyms for the terminal name.
92 All names but the last should be in lower case and contain
93 no blanks; the last name may well contain upper case and
94 blanks for readability.
96 Lines beginning with a `#' in the first column are treated
97 as comments. While comment lines are legal at any point,
98 the output of <STRONG>captoinfo</STRONG> and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>)
99 will move comments so they occur only between entries.
101 Newlines and leading tabs may be used for formatting
102 entries for readability. These are removed from parsed
103 entries. The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> option relies on this to format
104 if-then-else expressions: the result can be read by <STRONG>tic</STRONG>.
106 Terminal names (except for the last, verbose entry) should
107 be chosen using the following conventions. The particular
108 piece of hardware making up the terminal should have a
109 root name, thus "hp2621". This name should not contain
110 hyphens. Modes that the hardware can be in, or user pref-
111 erences, should be indicated by appending a hyphen and a
112 mode suffix. Thus, a vt100 in 132 column mode would be
113 vt100-w. The following suffixes should be used where pos-
116 <STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
117 -<EM>nn</EM> Number of lines on the screen aaa-60
118 -<EM>n</EM>p Number of pages of memory c100-4p
119 -am With automargins (usually the default) vt100-am
120 -m Mono mode; suppress color ansi-m
121 -mc Magic cookie; spaces when highlighting wy30-mc
122 -na No arrow keys (leave them in local) c100-na
123 -nam Without automatic margins vt100-nam
124 -nl No status line att4415-nl
125 -ns No status line hp2626-ns
126 -rv Reverse video c100-rv
127 -s Enable status line vt100-s
128 -vb Use visible bell instead of beep wy370-vb
130 -w Wide mode (> 80 columns, usually 132) vt100-w
132 For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
135 <STRONG>Predefined</STRONG> <STRONG>Capabilities</STRONG>
136 The following is a complete table of the capabilities
137 included in a terminfo description block and available to
138 terminfo-using code. In each line of the table,
140 The <STRONG>variable</STRONG> is the name by which the programmer (at the
141 terminfo level) accesses the capability.
143 The <STRONG>capname</STRONG> is the short name used in the text of the
144 database, and is used by a person updating the database.
145 Whenever possible, capnames are chosen to be the same as
146 or similar to the ANSI X3.64-1979 standard (now superseded
147 by ECMA-48, which uses identical or very similar names).
148 Semantics are also intended to match those of the specifi-
151 The termcap code is the old <STRONG>termcap</STRONG> capability name (some
152 capabilities are new, and have names which termcap did not
155 Capability names have no hard length limit, but an infor-
156 mal limit of 5 characters has been adopted to keep them
157 short and to allow the tabs in the source file <STRONG>Caps</STRONG> to
160 Finally, the description field attempts to convey the
161 semantics of the capability. You may find some codes in
162 the description field:
164 (P) indicates that padding may be specified
166 #[1-9] in the description field indicates that the string
167 is passed through tparm with parms as given (#<EM>i</EM>).
169 (P*) indicates that padding may vary in proportion to
170 the number of lines affected
172 (#<EM>i</EM>) indicates the <EM>i</EM>th parameter.
175 These are the boolean capabilities:
178 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
179 <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
180 auto_left_margin bw bw cub1 wraps from col-
182 auto_right_margin am am terminal has auto-
184 back_color_erase bce ut screen erased with
186 can_change ccc cc terminal can re-
189 ceol_standout_glitch xhp xs standout not erased
191 col_addr_glitch xhpa YA only positive motion
196 cpi_changes_res cpix YF changing character
199 cr_cancels_micro_mode crxm YB using cr turns off
201 dest_tabs_magic_smso xt xt tabs destructive,
204 eat_newline_glitch xenl xn newline ignored
207 erase_overstrike eo eo can erase over-
209 generic_type gn gn generic line type
210 hard_copy hc hc hardcopy terminal
211 hard_cursor chts HC cursor is hard to
213 has_meta_key km km Has a meta key
215 has_print_wheel daisy YC printer needs opera-
218 has_status_line hs hs has extra status
220 hue_lightness_saturation hls hl terminal uses only
223 insert_null_glitch in in insert mode distin-
225 lpi_changes_res lpix YG changing line pitch
227 memory_above da da display may be
230 memory_below db db display may be
233 move_insert_mode mir mi safe to move while
235 move_standout_mode msgr ms safe to move while
237 needs_xon_xoff nxon nx padding will not
240 no_esc_ctlc xsb xb beehive (f1=escape,
242 no_pad_char npc NP pad character does
244 non_dest_scroll_region ndscr ND scrolling region is
246 non_rev_rmcup nrrmc NR smcup does not
248 over_strike os os terminal can over-
250 prtr_silent mc5i 5i printer will not
252 row_addr_glitch xvpa YD only positive motion
254 semi_auto_right_margin sam YE printing in last
256 status_line_esc_ok eslok es escape can be used
258 tilde_glitch hz hz cannot print ~'s
262 transparent_underline ul ul underline character
264 xon_xoff xon xo terminal uses
267 These are the numeric capabilities:
270 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
271 <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
272 columns cols co number of columns in
274 init_tabs it it tabs initially every
276 label_height lh lh rows in each label
277 label_width lw lw columns in each
279 lines lines li number of lines on
281 lines_of_memory lm lm lines of memory if >
283 magic_cookie_glitch xmc sg number of blank
286 max_attributes ma ma maximum combined
289 max_colors colors Co maximum number of
291 max_pairs pairs pa maximum number of
294 maximum_windows wnum MW maximum number of
296 no_color_video ncv NC video attributes
299 num_labels nlab Nl number of labels on
301 padding_baud_rate pb pb lowest baud rate
303 virtual_terminal vt vt virtual terminal
305 width_status_line wsl ws number of columns in
308 The following numeric capabilities are present in the
309 SVr4.0 term structure, but are not yet documented in the
310 man page. They came in with SVr4's printer support.
313 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
314 <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
315 bit_image_entwining bitwin Yo number of passes for
317 bit_image_type bitype Yp type of bit-image
319 buffer_capacity bufsz Ya numbers of bytes
322 buttons btns BT number of buttons on
324 dot_horz_spacing spinh Yc spacing of dots hor-
328 dot_vert_spacing spinv Yb spacing of pins ver-
331 max_micro_address maddr Yd maximum value in
333 max_micro_jump mjump Ye maximum value in
335 micro_col_size mcs Yf character step size
337 micro_line_size mls Yg line step size when
339 number_of_pins npins Yh numbers of pins in
341 output_res_char orc Yi horizontal resolu-
344 output_res_horz_inch orhi Yk horizontal resolu-
347 output_res_line orl Yj vertical resolution
349 output_res_vert_inch orvi Yl vertical resolution
351 print_rate cps Ym print rate in char-
353 wide_char_size widcs Yn character step size
357 These are the string capabilities:
360 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
361 <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
362 acs_chars acsc ac graphics charset
365 back_tab cbt bt back tab (P)
366 bell bel bl audible signal
368 carriage_return cr cr carriage return (P*)
370 change_char_pitch cpi ZA Change number of
373 change_line_pitch lpi ZB Change number of
375 change_res_horz chr ZC Change horizontal
377 change_res_vert cvr ZD Change vertical res-
379 change_scroll_region csr cs change region to
382 char_padding rmp rP like ip but when in
384 clear_all_tabs tbc ct clear all tab stops
386 clear_margins mgc MC clear right and left
388 clear_screen clear cl clear screen and
390 clr_bol el1 cb Clear to beginning
394 clr_eol el ce clear to end of line
396 clr_eos ed cd clear to end of
398 column_address hpa ch horizontal position
400 command_character cmdch CC terminal settable
403 create_window cwin CW define a window #1
405 cursor_address cup cm move to row #1 col-
407 cursor_down cud1 do down one line
408 cursor_home home ho home cursor (if no
410 cursor_invisible civis vi make cursor invisi-
412 cursor_left cub1 le move left one space
413 cursor_mem_address mrcup CM memory relative cur-
416 cursor_normal cnorm ve make cursor appear
419 cursor_right cuf1 nd non-destructive
422 cursor_to_ll ll ll last line, first
424 cursor_up cuu1 up up one line
425 cursor_visible cvvis vs make cursor very
427 define_char defc ZE Define a character
430 delete_character dch1 dc delete character
432 delete_line dl1 dl delete line (P*)
433 dial_phone dial DI dial number #1
434 dis_status_line dsl ds disable status line
435 display_clock dclk DK display clock
436 down_half_line hd hd half a line down
437 ena_acs enacs eA enable alternate
439 enter_alt_charset_mode smacs as start alternate
441 enter_am_mode smam SA turn on automatic
443 enter_blink_mode blink mb turn on blinking
444 enter_bold_mode bold md turn on bold (extra
446 enter_ca_mode smcup ti string to start pro-
448 enter_delete_mode smdc dm enter delete mode
449 enter_dim_mode dim mh turn on half-bright
451 enter_doublewide_mode swidm ZF Enter double-wide
453 enter_draft_quality sdrfq ZG Enter draft-quality
455 enter_insert_mode smir im enter insert mode
456 enter_italics_mode sitm ZH Enter italic mode
457 enter_leftward_mode slm ZI Start leftward car-
460 enter_micro_mode smicm ZJ Start micro-motion
462 enter_near_letter_quality snlq ZK Enter NLQ mode
463 enter_normal_quality snrmq ZL Enter normal-quality
465 enter_protected_mode prot mp turn on protected
467 enter_reverse_mode rev mr turn on reverse
469 enter_secure_mode invis mk turn on blank mode
472 enter_shadow_mode sshm ZM Enter shadow-print
474 enter_standout_mode smso so begin standout mode
475 enter_subscript_mode ssubm ZN Enter subscript mode
476 enter_superscript_mode ssupm ZO Enter superscript
478 enter_underline_mode smul us begin underline mode
479 enter_upward_mode sum ZP Start upward car-
481 enter_xon_mode smxon SX turn on xon/xoff
483 erase_chars ech ec erase #1 characters
485 exit_alt_charset_mode rmacs ae end alternate char-
487 exit_am_mode rmam RA turn off automatic
489 exit_attribute_mode sgr0 me turn off all
491 exit_ca_mode rmcup te strings to end pro-
493 exit_delete_mode rmdc ed end delete mode
494 exit_doublewide_mode rwidm ZQ End double-wide mode
495 exit_insert_mode rmir ei exit insert mode
496 exit_italics_mode ritm ZR End italic mode
497 exit_leftward_mode rlm ZS End left-motion mode
498 exit_micro_mode rmicm ZT End micro-motion
500 exit_shadow_mode rshm ZU End shadow-print
502 exit_standout_mode rmso se exit standout mode
503 exit_subscript_mode rsubm ZV End subscript mode
504 exit_superscript_mode rsupm ZW End superscript mode
505 exit_underline_mode rmul ue exit underline mode
506 exit_upward_mode rum ZX End reverse charac-
508 exit_xon_mode rmxon RX turn off xon/xoff
510 fixed_pause pause PA pause for 2-3 sec-
512 flash_hook hook fh flash switch hook
513 flash_screen flash vb visible bell (may
515 form_feed ff ff hardcopy terminal
517 from_status_line fsl fs return from status
519 goto_window wingo WG go to window #1
520 hangup hup HU hang-up phone
521 init_1string is1 i1 initialization
523 init_2string is2 is initialization
526 init_3string is3 i3 initialization
528 init_file if if name of initializa-
530 init_prog iprog iP path name of program
532 initialize_color initc Ic initialize color #1
534 initialize_pair initp Ip Initialize color
538 insert_character ich1 ic insert character (P)
539 insert_line il1 al insert line (P*)
540 insert_padding ip ip insert padding after
542 key_a1 ka1 K1 upper left of keypad
543 key_a3 ka3 K3 upper right of key-
545 key_b2 kb2 K2 center of keypad
546 key_backspace kbs kb backspace key
547 key_beg kbeg @1 begin key
548 key_btab kcbt kB back-tab key
549 key_c1 kc1 K4 lower left of keypad
550 key_c3 kc3 K5 lower right of key-
552 key_cancel kcan @2 cancel key
553 key_catab ktbc ka clear-all-tabs key
554 key_clear kclr kC clear-screen or
556 key_close kclo @3 close key
557 key_command kcmd @4 command key
558 key_copy kcpy @5 copy key
559 key_create kcrt @6 create key
560 key_ctab kctab kt clear-tab key
561 key_dc kdch1 kD delete-character key
562 key_dl kdl1 kL delete-line key
563 key_down kcud1 kd down-arrow key
564 key_eic krmir kM sent by rmir or smir
566 key_end kend @7 end key
567 key_enter kent @8 enter/send key
568 key_eol kel kE clear-to-end-of-line
570 key_eos ked kS clear-to-end-of-
572 key_exit kext @9 exit key
573 key_f0 kf0 k0 F0 function key
574 key_f1 kf1 k1 F1 function key
575 key_f10 kf10 k; F10 function key
576 key_f11 kf11 F1 F11 function key
577 key_f12 kf12 F2 F12 function key
578 key_f13 kf13 F3 F13 function key
579 key_f14 kf14 F4 F14 function key
580 key_f15 kf15 F5 F15 function key
581 key_f16 kf16 F6 F16 function key
582 key_f17 kf17 F7 F17 function key
583 key_f18 kf18 F8 F18 function key
584 key_f19 kf19 F9 F19 function key
585 key_f2 kf2 k2 F2 function key
586 key_f20 kf20 FA F20 function key
587 key_f21 kf21 FB F21 function key
588 key_f22 kf22 FC F22 function key
589 key_f23 kf23 FD F23 function key
590 key_f24 kf24 FE F24 function key
592 key_f25 kf25 FF F25 function key
593 key_f26 kf26 FG F26 function key
594 key_f27 kf27 FH F27 function key
595 key_f28 kf28 FI F28 function key
596 key_f29 kf29 FJ F29 function key
597 key_f3 kf3 k3 F3 function key
598 key_f30 kf30 FK F30 function key
599 key_f31 kf31 FL F31 function key
600 key_f32 kf32 FM F32 function key
601 key_f33 kf33 FN F33 function key
602 key_f34 kf34 FO F34 function key
603 key_f35 kf35 FP F35 function key
604 key_f36 kf36 FQ F36 function key
605 key_f37 kf37 FR F37 function key
606 key_f38 kf38 FS F38 function key
607 key_f39 kf39 FT F39 function key
608 key_f4 kf4 k4 F4 function key
609 key_f40 kf40 FU F40 function key
610 key_f41 kf41 FV F41 function key
611 key_f42 kf42 FW F42 function key
612 key_f43 kf43 FX F43 function key
613 key_f44 kf44 FY F44 function key
614 key_f45 kf45 FZ F45 function key
615 key_f46 kf46 Fa F46 function key
616 key_f47 kf47 Fb F47 function key
617 key_f48 kf48 Fc F48 function key
618 key_f49 kf49 Fd F49 function key
619 key_f5 kf5 k5 F5 function key
620 key_f50 kf50 Fe F50 function key
621 key_f51 kf51 Ff F51 function key
622 key_f52 kf52 Fg F52 function key
623 key_f53 kf53 Fh F53 function key
624 key_f54 kf54 Fi F54 function key
625 key_f55 kf55 Fj F55 function key
626 key_f56 kf56 Fk F56 function key
627 key_f57 kf57 Fl F57 function key
628 key_f58 kf58 Fm F58 function key
629 key_f59 kf59 Fn F59 function key
630 key_f6 kf6 k6 F6 function key
631 key_f60 kf60 Fo F60 function key
632 key_f61 kf61 Fp F61 function key
633 key_f62 kf62 Fq F62 function key
634 key_f63 kf63 Fr F63 function key
635 key_f7 kf7 k7 F7 function key
636 key_f8 kf8 k8 F8 function key
637 key_f9 kf9 k9 F9 function key
638 key_find kfnd @0 find key
639 key_help khlp %1 help key
640 key_home khome kh home key
641 key_ic kich1 kI insert-character key
642 key_il kil1 kA insert-line key
643 key_left kcub1 kl left-arrow key
644 key_ll kll kH lower-left key (home
646 key_mark kmrk %2 mark key
647 key_message kmsg %3 message key
648 key_move kmov %4 move key
649 key_next knxt %5 next key
650 key_npage knp kN next-page key
651 key_open kopn %6 open key
652 key_options kopt %7 options key
653 key_ppage kpp kP previous-page key
654 key_previous kprv %8 previous key
655 key_print kprt %9 print key
656 key_redo krdo %0 redo key
658 key_reference kref &1 reference key
659 key_refresh krfr &2 refresh key
660 key_replace krpl &3 replace key
661 key_restart krst &4 restart key
662 key_resume kres &5 resume key
663 key_right kcuf1 kr right-arrow key
664 key_save ksav &6 save key
665 key_sbeg kBEG &9 shifted begin key
666 key_scancel kCAN &0 shifted cancel key
667 key_scommand kCMD *1 shifted command key
668 key_scopy kCPY *2 shifted copy key
669 key_screate kCRT *3 shifted create key
670 key_sdc kDC *4 shifted delete-char-
672 key_sdl kDL *5 shifted delete-line
674 key_select kslt *6 select key
675 key_send kEND *7 shifted end key
676 key_seol kEOL *8 shifted clear-to-
678 key_sexit kEXT *9 shifted exit key
679 key_sf kind kF scroll-forward key
680 key_sfind kFND *0 shifted find key
681 key_shelp kHLP #1 shifted help key
682 key_shome kHOM #2 shifted home key
683 key_sic kIC #3 shifted insert-char-
685 key_sleft kLFT #4 shifted left-arrow
687 key_smessage kMSG %a shifted message key
688 key_smove kMOV %b shifted move key
689 key_snext kNXT %c shifted next key
690 key_soptions kOPT %d shifted options key
691 key_sprevious kPRV %e shifted previous key
692 key_sprint kPRT %f shifted print key
693 key_sr kri kR scroll-backward key
694 key_sredo kRDO %g shifted redo key
695 key_sreplace kRPL %h shifted replace key
696 key_sright kRIT %i shifted right-arrow
698 key_srsume kRES %j shifted resume key
699 key_ssave kSAV !1 shifted save key
700 key_ssuspend kSPD !2 shifted suspend key
701 key_stab khts kT set-tab key
702 key_sundo kUND !3 shifted undo key
703 key_suspend kspd &7 suspend key
704 key_undo kund &8 undo key
705 key_up kcuu1 ku up-arrow key
706 keypad_local rmkx ke leave 'key-
708 keypad_xmit smkx ks enter 'key-
710 lab_f0 lf0 l0 label on function
712 lab_f1 lf1 l1 label on function
714 lab_f10 lf10 la label on function
716 lab_f2 lf2 l2 label on function
718 lab_f3 lf3 l3 label on function
720 lab_f4 lf4 l4 label on function
724 lab_f5 lf5 l5 label on function
726 lab_f6 lf6 l6 label on function
728 lab_f7 lf7 l7 label on function
730 lab_f8 lf8 l8 label on function
732 lab_f9 lf9 l9 label on function
734 label_format fln Lf label format
735 label_off rmln LF turn off soft labels
736 label_on smln LO turn on soft labels
737 meta_off rmm mo turn off meta mode
738 meta_on smm mm turn on meta mode
740 micro_column_address mhpa ZY Like column_address
742 micro_down mcud1 ZZ Like cursor_down in
744 micro_left mcub1 Za Like cursor_left in
746 micro_right mcuf1 Zb Like cursor_right in
748 micro_row_address mvpa Zc Like row_address #1
750 micro_up mcuu1 Zd Like cursor_up in
752 newline nel nw newline (behave like
754 order_of_pins porder Ze Match software bits
756 orig_colors oc oc Set all color pairs
758 orig_pair op op Set default pair to
760 pad_char pad pc padding char
762 parm_dch dch DC delete #1 characters
764 parm_delete_line dl DL delete #1 lines (P*)
765 parm_down_cursor cud DO down #1 lines (P*)
766 parm_down_micro mcud Zf Like parm_down_cur-
768 parm_ich ich IC insert #1 characters
770 parm_index indn SF scroll forward #1
772 parm_insert_line il AL insert #1 lines (P*)
773 parm_left_cursor cub LE move #1 characters
775 parm_left_micro mcub Zg Like parm_left_cur-
777 parm_right_cursor cuf RI move #1 characters
779 parm_right_micro mcuf Zh Like parm_right_cur-
781 parm_rindex rin SR scroll back #1 lines
783 parm_up_cursor cuu UP up #1 lines (P*)
784 parm_up_micro mcuu Zi Like parm_up_cursor
786 pkey_key pfkey pk program function key
790 pkey_local pfloc pl program function key
793 pkey_xmit pfx px program function key
796 plab_norm pln pn program label #1 to
798 print_screen mc0 ps print contents of
800 prtr_non mc5p pO turn on printer for
802 prtr_off mc4 pf turn off printer
803 prtr_on mc5 po turn on printer
804 pulse pulse PU select pulse dialing
805 quick_dial qdial QD dial number #1 with-
807 remove_clock rmclk RC remove clock
808 repeat_char rep rp repeat char #1 #2
810 req_for_input rfi RF send next input char
812 reset_1string rs1 r1 reset string
813 reset_2string rs2 r2 reset string
814 reset_3string rs3 r3 reset string
815 reset_file rf rf name of reset file
816 restore_cursor rc rc restore cursor to
819 row_address vpa cv vertical position #1
821 save_cursor sc sc save current cursor
823 scroll_forward ind sf scroll text up (P)
824 scroll_reverse ri sr scroll text down (P)
825 select_char_set scs Zj Select character
827 set_attributes sgr sa define video
830 set_background setb Sb Set background color
832 set_bottom_margin smgb Zk Set bottom margin at
834 set_bottom_margin_parm smgbp Zl Set bottom margin at
838 set_clock sclk SC set clock, #1 hrs #2
840 set_color_pair scp sp Set current color
842 set_foreground setf Sf Set foreground color
844 set_left_margin smgl ML set left soft margin
848 set_left_margin_parm smglp Zm Set left (right)
850 set_right_margin smgr MR set right soft mar-
853 set_right_margin_parm smgrp Zn Set right margin at
856 set_tab hts st set a tab in every
858 set_top_margin smgt Zo Set top margin at
860 set_top_margin_parm smgtp Zp Set top (bottom)
862 set_window wind wi current window is
865 start_bit_image sbim Zq Start printing bit
867 start_char_set_def scsd Zr Start character set
871 stop_bit_image rbim Zs Stop printing bit
873 stop_char_set_def rcsd Zt End definition of
875 subscript_characters subcs Zu List of subscript-
877 superscript_characters supcs Zv List of superscript-
879 tab ht ta tab to next 8-space
881 these_cause_cr docr Zw Printing any of
884 to_status_line tsl ts move to status line,
886 tone tone TO select touch tone
888 underline_char uc uc underline char and
890 up_half_line hu hu half a line up
891 user0 u0 u0 User string #0
892 user1 u1 u1 User string #1
893 user2 u2 u2 User string #2
894 user3 u3 u3 User string #3
895 user4 u4 u4 User string #4
896 user5 u5 u5 User string #5
897 user6 u6 u6 User string #6
898 user7 u7 u7 User string #7
899 user8 u8 u8 User string #8
900 user9 u9 u9 User string #9
901 wait_tone wait WA wait for dial-tone
902 xoff_character xoffc XF XOFF character
903 xon_character xonc XN XON character
904 zero_motion zerom Zx No motion for subse-
907 The following string capabilities are present in the
908 SVr4.0 term structure, but were originally not documented
912 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
913 <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
914 alt_scancode_esc scesa S8 Alternate escape
917 bit_image_carriage_return bicr Yv Move to beginning
919 bit_image_newline binel Zz Move to next row
922 bit_image_repeat birep Xy Repeat bit image
924 char_set_names csnm Zy Produce #1'th item
927 code_set_init csin ci Init sequence for
929 color_names colornm Yw Give name for
931 define_bit_image_region defbi Yx Define rectan-
934 device_type devt dv Indicate lan-
937 display_pc_char dispc S1 Display PC charac-
939 end_bit_image_region endbi Yy End a bit-image
941 enter_pc_charset_mode smpch S2 Enter PC character
943 enter_scancode_mode smsc S4 Enter PC scancode
945 exit_pc_charset_mode rmpch S3 Exit PC character
947 exit_scancode_mode rmsc S5 Exit PC scancode
949 get_mouse getm Gm Curses should get
953 key_mouse kmous Km Mouse event has
955 mouse_info minfo Mi Mouse status
957 pc_term_options pctrm S6 PC terminal
959 pkey_plab pfxl xl Program function
963 req_mouse_pos reqmp RQ Request mouse
965 scancode_escape scesc S7 Escape for scan-
967 set0_des_seq s0ds s0 Shift to codeset 0
969 set1_des_seq s1ds s1 Shift to codeset 1
970 set2_des_seq s2ds s2 Shift to codeset 2
971 set3_des_seq s3ds s3 Shift to codeset 3
972 set_a_background setab AB Set background
975 set_a_foreground setaf AF Set foreground
978 set_color_band setcolor Yz Change to ribbon
980 set_lr_margin smglr ML Set both left and
985 set_page_length slines YZ Set page length to
988 set_tb_margin smgtb MT Sets both top and
992 The XSI Curses standard added these hardcopy capabili-
993 ties. They were used in some post-4.1 versions of System
994 V curses, e.g., Solaris 2.5 and IRIX 6.x. Except for <STRONG>YI</STRONG>,
995 the <STRONG>ncurses</STRONG> termcap names for them are invented. Accord-
996 ing to the XSI Curses standard, they have no termcap
997 names. If your compiled terminfo entries use these, they
998 may not be binary-compatible with System V terminfo
999 entries after SVr4.1; beware!
1002 <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
1003 <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
1004 enter_horizontal_hl_mode ehhlm Xh Enter horizontal
1006 enter_left_hl_mode elhlm Xl Enter left highlight
1008 enter_low_hl_mode elohlm Xo Enter low highlight
1010 enter_right_hl_mode erhlm Xr Enter right high-
1012 enter_top_hl_mode ethlm Xt Enter top highlight
1014 enter_vertical_hl_mode evhlm Xv Enter vertical high-
1016 set_a_attributes sgr1 sA Define second set of
1019 set_pglen_inch slengthYI Set page length to
1021 inch (some implemen-
1025 <STRONG>User-Defined</STRONG> <STRONG>Capabilities</STRONG>
1026 The preceding section listed the <EM>predefined</EM> capabilities.
1027 They deal with some special features for terminals no
1028 longer (or possibly never) produced. Occasionally there
1029 are special features of newer terminals which are awkward
1030 or impossible to represent by reusing the predefined capa-
1033 <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
1034 capabilities. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG>
1035 option for this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats
1036 unknown capabilities as user-defined. That is, if <STRONG>tic</STRONG>
1037 encounters a capability name which it does not recognize,
1038 it infers its type (boolean, number or string) from the
1039 syntax and makes an extended table entry for that capabil-
1040 ity. The <STRONG>use_extended_names</STRONG> function makes this informa-
1041 tion conditionally available to applications. The ncurses
1042 library provides the data leaving most of the behavior to
1045 <STRONG>o</STRONG> User-defined capability strings whose name begins with
1046 "k" are treated as function keys.
1048 <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG>
1049 can be inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
1051 <STRONG>o</STRONG> If the capability name happens to be two characters,
1052 the capability is also available through the termcap
1055 While termcap is said to be extensible because it does not
1056 use a predefined set of capabilities, in practice it has
1057 been limited to the capabilities defined by terminfo
1058 implementations. As a rule, user-defined capabilities
1059 intended for use by termcap applications should be limited
1060 to booleans and numbers to avoid running past the 1023
1061 byte limit assumed by termcap implementations and their
1062 applications. In particular, providing extended sets of
1063 function keys (past the 60 numbered keys and the handful
1064 of special named keys) is best done using the longer names
1065 available using terminfo.
1067 <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
1068 The following entry, describing an ANSI-standard terminal,
1069 is representative of what a <STRONG>terminfo</STRONG> entry for a modern
1070 terminal typically looks like.
1072 ansi|ansi/pc-term compatible with color,
1074 colors#8, ncv#3, pairs#64,
1075 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
1076 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
1077 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%p1%dG, ht=\E[I,
1078 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, .indn=\E[%p1%dT,
1079 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1080 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[M, kf10=\E[V,
1081 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P,
1082 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
1083 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
1084 op=\E[37;40m, rep=%p1%c\E[%p2%{1}%-%db,
1085 rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B,
1086 s3ds=\E+B, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1087 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1088 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1089 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m,
1090 sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
1091 u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
1093 Entries may continue onto multiple lines by placing white
1094 space at the beginning of each line except the first.
1095 Comments may be included on lines beginning with "#".
1096 Capabilities in <EM>terminfo</EM> are of three types:
1098 <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal
1099 has some particular feature,
1101 <STRONG>o</STRONG> numeric capabilities giving the size of the terminal
1102 or the size of particular delays, and
1104 <STRONG>o</STRONG> string capabilities, which give a sequence which can
1105 be used to perform particular terminal operations.
1107 <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
1108 All capabilities have names. For instance, the fact that
1109 ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
1110 automatic return and line-feed when the end of a line is
1111 reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
1112 description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
1113 followed by the character `#' and then a positive value.
1114 Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
1115 minal has, gives the value `80' for ansi. Values for
1116 numeric capabilities may be specified in decimal, octal or
1117 hexadecimal, using the C programming language conventions
1118 (e.g., 255, 0377 and 0xff or 0xFF).
1120 Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
1121 end of line sequence) are given by the two-character code,
1122 an `=', and then a string ending at the next following
1125 A number of escape sequences are provided in the string
1126 valued capabilities for easy encoding of characters there.
1127 Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
1128 control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
1129 <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
1130 backspace, form-feed, and space. Other escapes include
1132 <STRONG>o</STRONG> <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
1134 <STRONG>o</STRONG> <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
1136 <STRONG>o</STRONG> <STRONG>\</STRONG>, for comma,
1138 <STRONG>o</STRONG> <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
1140 <STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
1142 <STRONG>\0</STRONG> will produce \200, which does not terminate a
1143 string but behaves as a null character on most termi-
1144 nals, providing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.
1146 The reason for this quirk is to maintain binary com-
1147 patibility of the compiled terminfo files with other
1148 implementations, e.g., the SVr4 systems, which docu-
1149 ment this. Compiled terminfo files use null-termi-
1150 nated strings, with no lengths. Modifying this would
1151 require a new binary format, which would not work with
1152 other implementations.
1154 Finally, characters may be given as three octal digits
1155 after a <STRONG>\</STRONG>.
1157 A delay in milliseconds may appear anywhere in a string
1158 capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
1159 and padding characters are supplied by <EM>tputs</EM> to provide
1160 this delay. The delay must be a number with at most one
1161 decimal place of precision; it may be followed by suffixes
1162 `*' or '/' or both. A `*' indicates that the padding
1163 required is proportional to the number of lines affected
1164 by the operation, and the amount given is the per-
1165 affected-unit padding required. (In the case of insert
1166 character, the factor is still the number of <EM>lines</EM>
1167 affected.) Normally, padding is advisory if the device
1168 has the <STRONG>xon</STRONG> capability; it is used for cost computation
1169 but does not trigger delays. A `/' suffix indicates that
1170 the padding is mandatory and forces a delay of the given
1171 number of milliseconds even on devices for which <STRONG>xon</STRONG> is
1172 present to indicate flow control.
1174 Sometimes individual capabilities must be commented out.
1175 To do this, put a period before the capability name. For
1176 example, see the second <STRONG>ind</STRONG> in the example above.
1178 <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
1179 The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
1180 several places. It uses only the first description found.
1181 The library has a compiled-in list of places to search
1182 which can be overridden by environment variables. Before
1183 starting to search, <STRONG>ncurses</STRONG> eliminates duplicates in its
1186 <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is
1187 interpreted as the pathname of a directory containing
1188 the compiled description you are working on. Only
1189 that directory is searched.
1191 <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in
1192 the directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
1195 <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is
1196 set, <STRONG>ncurses</STRONG> will interpret the contents of that vari-
1197 able as a list of colon-separated directories (or
1198 database files) to be searched.
1200 An empty directory name (i.e., if the variable begins
1201 or ends with a colon, or contains adacent colons) is
1202 interpreted as the system location <EM>/usr/share/ter-</EM>
1205 <STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
1207 <STRONG>o</STRONG> a list of directories
1208 (/usr/local/ncurses/share/terminfo:/usr/share/ter-
1211 <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM>
1212 (the compiled-in default).
1214 <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
1215 We now outline how to prepare descriptions of terminals.
1216 The most effective way to prepare a terminal description
1217 is by imitating the description of a similar terminal in
1218 <EM>terminfo</EM> and to build up a description gradually, using
1219 partial descriptions with <EM>vi</EM> or some other screen-oriented
1220 program to check that they are correct. Be aware that a
1221 very unusual terminal may expose deficiencies in the abil-
1222 ity of the <EM>terminfo</EM> file to describe it or bugs in the
1223 screen-handling code of the test program.
1225 To get the padding for insert line right (if the terminal
1226 manufacturer did not document it) a severe test is to edit
1227 a large file at 9600 baud, delete 16 or so lines from the
1228 middle of the screen, then hit the `u' key several times
1229 quickly. If the terminal messes up, more padding is usu-
1230 ally needed. A similar test can be used for insert char-
1233 <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
1234 The number of columns on each line for the terminal is
1235 given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
1236 a CRT, then the number of lines on the screen is given by
1237 the <STRONG>lines</STRONG> capability. If the terminal wraps around to the
1238 beginning of the next line when it reaches the right mar-
1239 gin, then it should have the <STRONG>am</STRONG> capability. If the termi-
1240 nal can clear its screen, leaving the cursor in the home
1241 position, then this is given by the <STRONG>clear</STRONG> string capabil-
1242 ity. If the terminal overstrikes (rather than clearing a
1243 position when a character is struck over) then it should
1244 have the <STRONG>os</STRONG> capability. If the terminal is a printing
1245 terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
1246 (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
1247 4010 series, as well as hard copy and APL terminals.) If
1248 there is a code to move the cursor to the left edge of the
1249 current row, give this as <STRONG>cr</STRONG>. (Normally this will be car-
1250 riage return, control M.) If there is a code to produce
1251 an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
1253 If there is a code to move the cursor one position to the
1254 left (such as backspace) that capability should be given
1255 as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
1256 down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
1257 cursor motions should not alter the text they pass over,
1258 for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
1259 the space would erase the character moved over.
1261 A very important point here is that the local cursor
1262 motions encoded in <EM>terminfo</EM> are undefined at the left and
1263 top edges of a CRT terminal. Programs should never
1264 attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
1265 given, and never attempt to go up locally off the top. In
1266 order to scroll text up, a program will go to the bottom
1267 left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
1269 To scroll text down, a program goes to the top left corner
1270 of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
1271 The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
1272 respective corners of the screen.
1274 Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG>
1275 and <STRONG>rin</STRONG> which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except
1276 that they take one parameter, and scroll that many lines.
1277 They are also undefined except at the appropriate edge of
1280 The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
1281 right edge of the screen when text is output, but this
1282 does not necessarily apply to a <STRONG>cuf1</STRONG> from the last column.
1283 The only local motion which is defined from the left edge
1284 is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
1285 move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
1286 given, the effect is undefined. This is useful for draw-
1287 ing a box around the edge of the screen, for example. If
1288 the terminal has switch selectable automatic margins, the
1289 <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
1290 If the terminal has a command which moves to the first
1291 column of the next line, that command can be given as <STRONG>nel</STRONG>
1292 (newline). It does not matter if the command clears the
1293 remainder of the current line, so if the terminal has no
1294 <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
1295 out of one or both of them.
1297 These capabilities suffice to describe hard-copy and
1298 "glass-tty" terminals. Thus the model 33 teletype is
1301 33|tty33|tty|model 33 teletype,
1302 bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
1304 while the Lear Siegler ADM-3 is described as
1307 am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
1310 <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
1311 Cursor addressing and other strings requiring parameters
1312 in the terminal are described by a parameterized string
1313 capability, with <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
1314 example, to address the cursor, the <STRONG>cup</STRONG> capability is
1315 given, using two parameters: the row and column to address
1316 to. (Rows and columns are numbered from zero and refer to
1317 the physical screen visible to the user, not to any unseen
1318 memory.) If the terminal has memory relative cursor
1319 addressing, that can be indicated by <STRONG>mrcup</STRONG>.
1321 The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
1322 to manipulate it. Typically a sequence will push one of
1323 the parameters onto the stack and then print it in some
1324 format. Print (e.g., "%d") is a special case. Other
1325 operations, including "%t" pop their operand from the
1326 stack. It is noted that more complex operations are often
1327 necessary, e.g., in the <STRONG>sgr</STRONG> string.
1329 The <STRONG>%</STRONG> encodings have the following meanings:
1333 %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
1334 as in <STRONG>printf</STRONG>, flags are [-+#] and space. Use a `:'
1335 to allow the next character to be a `-' flag, avoid-
1336 ing interpreting "%-" as an operator.
1338 %c print pop() like %c in <STRONG>printf</STRONG>
1340 %s print pop() like %s in <STRONG>printf</STRONG>
1343 push <EM>i</EM>'th parameter
1346 set dynamic variable [a-z] to pop()
1349 get dynamic variable [a-z] and push it
1352 set static variable [a-z] to pop()
1355 get static variable [a-z] and push it
1357 The terms "static" and "dynamic" are misleading.
1358 Historically, these are simply two different sets of
1359 variables, whose values are not reset between calls
1360 to <STRONG>tparm</STRONG>. However, that fact is not documented in
1361 other implementations. Relying on it will adversely
1362 impact portability to other implementations.
1364 %'<EM>c</EM>' char constant <EM>c</EM>
1367 integer constant <EM>nn</EM>
1372 arithmetic (%m is mod): push(pop() op pop())
1375 bit operations (AND, OR and exclusive-OR): push(pop()
1379 logical operations: push(pop() op pop())
1382 logical AND and OR operations (for conditionals)
1385 unary operations (logical and bit complement):
1388 %i add 1 to first two parameters (for ANSI terminals)
1390 %? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
1391 This forms an if-then-else. The %e <EM>elsepart</EM> is
1392 optional. Usually the %? <EM>expr</EM> part pushes a value
1393 onto the stack, and %t pops it from the stack, test-
1394 ing if it is nonzero (true). If it is zero (false),
1395 control passes to the %e (else) part.
1397 It is possible to form else-if's a la Algol 68:
1398 %? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
1400 where ci are conditions, bi are bodies.
1402 Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
1403 ture of if-then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
1404 be very complicated when written on one line. The <STRONG>-f</STRONG>
1405 option splits the string into lines with the parts
1408 Binary operations are in postfix form with the operands in
1409 the usual order. That is, to get x-5 one would use
1410 "%gx%{5}%-". %P and %g variables are persistent across
1411 escape-string evaluations.
1413 Consider the HP2645, which, to get to row 3 and column 12,
1414 needs to be sent \E&a12c03Y padded for 6 milliseconds.
1415 Note that the order of the rows and columns is inverted
1416 here, and that the row and column are printed as two dig-
1417 its. Thus its <STRONG>cup</STRONG> capability is "cup=6\E&%p2%2dc%p1%2dY".
1419 The Microterm ACT-IV needs the current row and column sent
1420 preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
1421 in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
1422 need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
1423 move the cursor up one line on the screen (<STRONG>cuu1</STRONG>). This is
1424 necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
1425 and <STRONG>\r</STRONG>, as the system may change or discard them. (The
1426 library routines dealing with terminfo set tty modes so
1427 that tabs are never expanded, so \t is safe to send. This
1428 turns out to be essential for the Ann Arbor 4080.)
1430 A final example is the LSI ADM-3a, which uses row and col-
1431 umn offset by a blank character, thus "cup=\E=%p1%'
1432 '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
1433 first parameter, pushes the ASCII value for a space (32),
1434 adds them (pushing the sum on the stack in place of the
1435 two previous values) and outputs that value as a charac-
1436 ter. Then the same is done for the second parameter.
1437 More complex arithmetic is possible using the stack.
1439 <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
1440 If the terminal has a fast way to home the cursor (to very
1441 upper left corner of screen) then this can be given as
1442 <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
1443 hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
1444 with <STRONG>cuu1</STRONG> from the home position, but a program should
1445 never do this itself (unless <STRONG>ll</STRONG> does) because it can make
1446 no assumption about the effect of moving up from the home
1447 position. Note that the home position is the same as
1448 addressing to (0,0): to the top left corner of the screen,
1449 not of memory. (Thus, the \EH sequence on HP terminals
1450 cannot be used for <STRONG>home</STRONG>.)
1452 If the terminal has row or column absolute cursor address-
1453 ing, these can be given as single parameter capabilities
1454 <STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
1455 tion absolute). Sometimes these are shorter than the more
1456 general two parameter sequence (as with the hp2645) and
1457 can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
1458 ized local motions (e.g., move <EM>n</EM> spaces to the right)
1459 these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single
1460 parameter indicating how many spaces to move. These are
1461 primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
1462 as the TEKTRONIX 4025.
1464 If the terminal needs to be in a special mode when running
1465 a program that uses these capabilities, the codes to enter
1466 and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
1467 arises, for example, from terminals like the Concept with
1468 more than one page of memory. If the terminal has only
1469 memory relative cursor addressing and not screen relative
1470 cursor addressing, a one screen-sized window must be fixed
1471 into the terminal for cursor addressing to work properly.
1472 This is also used for the TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets
1473 the command character to be the one used by terminfo. If
1474 the <STRONG>smcup</STRONG> sequence will not restore the screen after an
1475 <STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
1476 <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
1478 <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
1479 If the terminal can clear from the current position to the
1480 end of the line, leaving the cursor where it is, this
1481 should be given as <STRONG>el</STRONG>. If the terminal can clear from the
1482 beginning of the line to the current position inclusive,
1483 leaving the cursor where it is, this should be given as
1484 <STRONG>el1</STRONG>. If the terminal can clear from the current position
1485 to the end of the display, then this should be given as
1486 <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
1487 (Thus, it can be simulated by a request to delete a large
1488 number of lines, if a true <STRONG>ed</STRONG> is not available.)
1490 <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
1491 If the terminal can open a new blank line before the line
1492 where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
1493 done only from the first position of a line. The cursor
1494 must then appear on the newly blank line. If the terminal
1495 can delete the line which the cursor is on, then this
1496 should be given as <STRONG>dl1</STRONG>; this is done only from the first
1497 position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
1498 <STRONG>dl1</STRONG> which take a single parameter and insert or delete
1499 that many lines can be given as <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
1501 If the terminal has a settable scrolling region (like the
1502 vt100) the command to set this can be described with the
1503 <STRONG>csr</STRONG> capability, which takes two parameters: the top and
1504 bottom lines of the scrolling region. The cursor position
1505 is, alas, undefined after using this command.
1507 It is possible to get the effect of insert or delete line
1508 using <STRONG>csr</STRONG> on a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save
1509 and restore cursor) commands may be useful for ensuring
1510 that your synthesized insert/delete string does not move
1511 the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
1512 synthesis automatically, so you need not compose
1513 insert/delete strings for an entry with <STRONG>csr</STRONG>).
1515 Yet another way to construct insert and delete might be to
1516 use a combination of index with the memory-lock feature
1517 found on some terminals (like the HP-700/90 series, which
1518 however also has insert/delete).
1520 Inserting lines at the top or bottom of the screen can
1521 also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
1522 true insert/delete line, and is often faster even on ter-
1523 minals with those features.
1525 The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
1526 scrolling window is effectively a view port on a screen-
1527 sized canvas. To test for this capability, create a
1528 scrolling region in the middle of the screen, write some-
1529 thing to the bottom line, move the cursor to the top of
1530 the region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data
1531 scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
1532 appears, then scrolling is non-destructive. System V and
1533 XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
1534 late destructive scrolling; their documentation cautions
1535 you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
1536 implementation is more liberal and will do explicit erases
1537 after scrolling if <STRONG>ndstr</STRONG> is defined.
1539 If the terminal has the ability to define a window as part
1540 of memory, which all commands affect, it should be given
1541 as the parameterized string <STRONG>wind</STRONG>. The four parameters are
1542 the starting and ending lines in memory and the starting
1543 and ending columns in memory, in that order.
1545 If the terminal can retain display memory above, then the
1546 <STRONG>da</STRONG> capability should be given; if display memory can be
1547 retained below, then <STRONG>db</STRONG> should be given. These indicate
1548 that deleting a line or scrolling may bring non-blank
1549 lines up from below or that scrolling back with <STRONG>ri</STRONG> may
1550 bring down non-blank lines.
1552 <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
1553 There are two basic kinds of intelligent terminals with
1554 respect to insert/delete character which can be described
1555 using <EM>terminfo.</EM> The most common insert/delete character
1556 operations affect only the characters on the current line
1557 and shift characters off the end of the line rigidly.
1558 Other terminals, such as the Concept 100 and the Perkin
1559 Elmer Owl, make a distinction between typed and untyped
1560 blanks on the screen, shifting upon an insert or delete
1561 only to an untyped blank on the screen which is either
1562 eliminated, or expanded to two untyped blanks.
1564 You can determine the kind of terminal you have by clear-
1565 ing the screen and then typing text separated by cursor
1566 motions. Type "abc def" using local cursor motions
1567 (not spaces) between the "abc" and the "def". Then posi-
1568 tion the cursor before the "abc" and put the terminal in
1569 insert mode. If typing characters causes the rest of the
1570 line to shift rigidly and characters to fall off the end,
1571 then your terminal does not distinguish between blanks and
1572 untyped positions. If the "abc" shifts over to the "def"
1573 which then move together around the end of the current
1574 line and onto the next as you insert, you have the second
1575 type of terminal, and should give the capability <STRONG>in</STRONG>, which
1576 stands for "insert null".
1578 While these are two logically separate attributes (one
1579 line versus multi-line insert mode, and special treatment
1580 of untyped spaces) we have seen no terminals whose insert
1581 mode cannot be described with the single attribute.
1583 Terminfo can describe both terminals which have an insert
1584 mode, and terminals which send a simple sequence to open a
1585 blank position on the current line. Give as <STRONG>smir</STRONG> the
1586 sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
1587 sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
1588 sequence needed to be sent just before sending the charac-
1589 ter to be inserted. Most terminals with a true insert
1590 mode will not give <STRONG>ich1</STRONG>; terminals which send a sequence
1591 to open a screen position should give it here.
1593 If your terminal has both, insert mode is usually prefer-
1594 able to <STRONG>ich1</STRONG>. Technically, you should not give both
1595 unless the terminal actually requires both to be used in
1596 combination. Accordingly, some non-curses applications
1597 get confused if both are present; the symptom is doubled
1598 characters in an update using insert. This requirement is
1599 now rare; most <STRONG>ich</STRONG> sequences do not require previous smir,
1600 and most smir insert modes do not require <STRONG>ich1</STRONG> before each
1601 character. Therefore, the new <STRONG>curses</STRONG> actually assumes
1602 this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
1603 appropriate (but not both). If you have to write an entry
1604 to be used under new curses for a terminal old enough to
1605 need both, include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
1607 If post insert padding is needed, give this as a number of
1608 milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
1609 which may need to be sent after an insert of a single
1610 character may also be given in <STRONG>ip</STRONG>. If your terminal needs
1611 both to be placed into an `insert mode' and a special code
1612 to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
1613 and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
1614 capability, with one parameter, <EM>n</EM>, will repeat the effects
1615 of <STRONG>ich1</STRONG> <EM>n</EM> times.
1617 If padding is necessary between characters typed while not
1618 in insert mode, give this as a number of milliseconds pad-
1619 ding in <STRONG>rmp</STRONG>.
1621 It is occasionally necessary to move around while in
1622 insert mode to delete characters on the same line (e.g.,
1623 if there is a tab after the insertion position). If your
1624 terminal allows motion while in insert mode you can give
1625 the capability <STRONG>mir</STRONG> to speed up inserting in this case.
1626 Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
1627 (notably Datamedia's) must not have <STRONG>mir</STRONG> because of the way
1628 their insert mode works.
1630 Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
1631 ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
1632 and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
1633 delete mode (any mode the terminal needs to be placed in
1634 for <STRONG>dch1</STRONG> to work).
1636 A command to erase <EM>n</EM> characters (equivalent to outputting
1637 <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
1640 <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
1641 If your terminal has one or more kinds of display
1642 attributes, these can be represented in a number of dif-
1643 ferent ways. You should choose one display form as <EM>stand-</EM>
1644 <EM>out</EM> <EM>mode</EM>, representing a good, high contrast, easy-on-the-
1645 eyes, format for highlighting error messages and other
1646 attention getters. (If you have a choice, reverse video
1647 plus half-bright is good, or reverse video alone.) The
1648 sequences to enter and exit standout mode are given as
1649 <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
1650 or out of standout mode leaves one or even two blank spa-
1651 ces on the screen, as the TVI 912 and Teleray 1061 do,
1652 then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
1654 Codes to begin underlining and end underlining can be
1655 given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
1656 a code to underline the current character and move the
1657 cursor one space to the right, such as the Microterm Mime,
1658 this can be given as <STRONG>uc</STRONG>.
1660 Other capabilities to enter various highlighting modes
1661 include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
1662 (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
1663 <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
1664 attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
1665 mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
1666 Turning on any of these modes singly may or may not turn
1669 If there is a sequence to set arbitrary combinations of
1670 modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
1671 ing 9 parameters. Each parameter is either 0 or nonzero,
1672 as the corresponding attribute is on or off. The 9 param-
1673 eters are, in order: standout, underline, reverse, blink,
1674 dim, bold, blank, protect, alternate character set. Not
1675 all modes need be supported by <STRONG>sgr</STRONG>, only those for which
1676 corresponding separate attribute commands exist.
1678 For example, the DEC vt220 supports most of the modes:
1680 <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
1683 p1 standout \E[0;1;7m
1684 p2 underline \E[0;4m
1687 p5 dim not available
1691 p9 altcharset ^O (off) ^N (on)
1693 We begin each escape sequence by turning off any existing
1694 modes, since there is no quick way to determine whether
1695 they are active. Standout is set up to be the combination
1696 of reverse and bold. The vt220 terminal has a protect
1697 mode, though it is not commonly used in sgr because it
1698 protects characters on the screen from the host's era-
1699 sures. The altcharset mode also is different in that it
1700 is either ^O or ^N, depending on whether it is off or on.
1701 If all modes are turned on, the resulting sequence is
1704 Some sequences are common to different modes. For exam-
1705 ple, ;7 is output when either p1 or p3 is true, that is,
1706 if either standout or reverse modes are turned on.
1708 Writing out the above sequences, along with their depen-
1711 <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
1715 ;1 if p1 or p6 %?%p1%p6%|%t;1%;
1716 ;4 if p2 %?%p2%|%t;4%;
1717 ;5 if p4 %?%p4%|%t;5%;
1718 ;7 if p1 or p3 %?%p1%p3%|%t;7%;
1719 ;8 if p7 %?%p7%|%t;8%;
1721 ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
1723 Putting this all together into the sgr sequence gives:
1725 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
1726 %?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1728 Remember that if you specify sgr, you must also specify
1729 sgr0. Also, some implementations rely on sgr being given
1730 if sgr0 is, Not all terminfo entries necessarily have an
1731 sgr string, however. Many terminfo entries are derived
1732 from termcap entries which have no sgr string. The only
1733 drawback to adding an sgr string is that termcap also
1734 assumes that sgr0 does not exit alternate character set
1737 Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit
1738 special "cookies" when they receive mode-setting
1739 sequences, which affect the display algorithm rather than
1740 having extra bits for each character. Some terminals,
1741 such as the HP 2621, automatically leave standout mode
1742 when they move to a new line or the cursor is addressed.
1743 Programs using standout mode should exit standout mode
1744 before moving the cursor or sending a newline, unless the
1745 <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
1746 standout mode, is present.
1748 If the terminal has a way of flashing the screen to indi-
1749 cate an error quietly (a bell replacement) then this can
1750 be given as <STRONG>flash</STRONG>; it must not move the cursor.
1752 If the cursor needs to be made more visible than normal
1753 when it is not on the bottom line (to make, for example, a
1754 non-blinking underline into an easier to find block or
1755 blinking underline) give this sequence as <STRONG>cvvis</STRONG>. If there
1756 is a way to make the cursor completely invisible, give
1757 that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which
1758 undoes the effects of both of these modes.
1760 If your terminal correctly generates underlined characters
1761 (with no special codes needed) even though it does not
1762 overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
1763 character overstriking another leaves both characters on
1764 the screen, specify the capability <STRONG>os</STRONG>. If overstrikes are
1765 erasable with a blank, then this should be indicated by
1766 giving <STRONG>eo</STRONG>.
1768 <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
1769 If the terminal has a keypad that transmits codes when the
1770 keys are pressed, this information can be given. Note
1771 that it is not possible to handle terminals where the key-
1772 pad only works in local (this applies, for example, to the
1773 unshifted HP 2621 keys). If the keypad can be set to
1774 transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
1775 <STRONG>rmkx</STRONG>. Otherwise the keypad is assumed to always transmit.
1777 The codes sent by the left arrow, right arrow, up arrow,
1778 down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
1779 <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
1780 tion keys such as f0, f1, ..., f10, the codes they send
1781 can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
1782 labels other than the default f0 through f10, the labels
1783 can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
1785 The codes transmitted by certain other special keys can be
1788 <STRONG>o</STRONG> <STRONG>kll</STRONG> (home down),
1790 <STRONG>o</STRONG> <STRONG>kbs</STRONG> (backspace),
1792 <STRONG>o</STRONG> <STRONG>ktbc</STRONG> (clear all tabs),
1794 <STRONG>o</STRONG> <STRONG>kctab</STRONG> (clear the tab stop in this column),
1796 <STRONG>o</STRONG> <STRONG>kclr</STRONG> (clear screen or erase key),
1798 <STRONG>o</STRONG> <STRONG>kdch1</STRONG> (delete character),
1800 <STRONG>o</STRONG> <STRONG>kdl1</STRONG> (delete line),
1802 <STRONG>o</STRONG> <STRONG>krmir</STRONG> (exit insert mode),
1804 <STRONG>o</STRONG> <STRONG>kel</STRONG> (clear to end of line),
1806 <STRONG>o</STRONG> <STRONG>ked</STRONG> (clear to end of screen),
1808 <STRONG>o</STRONG> <STRONG>kich1</STRONG> (insert character or enter insert mode),
1810 <STRONG>o</STRONG> <STRONG>kil1</STRONG> (insert line),
1812 <STRONG>o</STRONG> <STRONG>knp</STRONG> (next page),
1814 <STRONG>o</STRONG> <STRONG>kpp</STRONG> (previous page),
1816 <STRONG>o</STRONG> <STRONG>kind</STRONG> (scroll forward/down),
1818 <STRONG>o</STRONG> <STRONG>kri</STRONG> (scroll backward/up),
1820 <STRONG>o</STRONG> <STRONG>khts</STRONG> (set a tab stop in this column).
1822 In addition, if the keypad has a 3 by 3 array of keys
1823 including the four arrow keys, the other five keys can be
1824 given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are use-
1825 ful when the effects of a 3 by 3 directional pad are
1828 Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
1829 <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
1830 be specified as <STRONG>pln</STRONG>. Each of these strings takes two
1831 parameters: the function key number to program (from 0 to
1832 10) and the string to program it with. Function key num-
1833 bers out of this range may program undefined keys in a
1834 terminal dependent manner. The difference between the
1835 capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
1836 to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
1837 causes the string to be executed by the terminal in local;
1838 and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
1841 The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
1842 grammable screen labels and their width and height. If
1843 there are commands to turn the labels on and off, give
1844 them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
1845 or more pln sequences to make sure that the change becomes
1848 <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
1849 If the terminal has hardware tabs, the command to advance
1850 to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
1851 I). A "back-tab" command which moves leftward to the pre-
1852 ceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
1853 the teletype modes indicate that tabs are being expanded
1854 by the computer rather than being sent to the terminal,
1855 programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
1856 present, since the user may not have the tab stops prop-
1857 erly set. If the terminal has hardware tabs which are
1858 initially set every <EM>n</EM> spaces when the terminal is powered
1859 up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
1860 of spaces the tabs are set to. This is normally used by
1861 the <EM>tset</EM> command to determine whether to set the mode for
1862 hardware tab expansion, and whether to set the tab stops.
1863 If the terminal has tab stops that can be saved in non-
1864 volatile memory, the terminfo description can assume that
1865 they are properly set.
1867 Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
1868 tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
1869 program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
1870 name of a file containing long initialization strings.
1871 These strings are expected to set the terminal into modes
1872 consistent with the rest of the terminfo description.
1873 They are normally sent to the terminal, by the <EM>init</EM> option
1874 of the <EM>tput</EM> program, each time the user logs in. They
1875 will be printed in the following order:
1878 <STRONG>iprog</STRONG>
1880 output <STRONG>is1</STRONG> <STRONG>is2</STRONG>
1882 set the margins using
1883 <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
1886 <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>
1892 output <STRONG>is3</STRONG>.
1894 Most initialization is done with <STRONG>is2</STRONG>. Special terminal
1895 modes can be set up without duplicating strings by putting
1896 the common sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
1897 <STRONG>is3</STRONG>.
1899 A set of sequences that does a harder reset from a totally
1900 unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
1901 gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
1902 strings are output by the <EM>reset</EM> program, which is used
1903 when the terminal gets into a wedged state. Commands are
1904 normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
1905 duce annoying effects on the screen and are not necessary
1906 when logging in. For example, the command to set the
1907 vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>,
1908 but it causes an annoying glitch of the screen and is not
1909 normally needed since the terminal is usually already in
1912 The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
1913 the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
1914 instead of <STRONG>is1</STRONG>, etc. If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
1915 capability strings are missing, the <EM>reset</EM> program falls
1916 back upon the corresponding initialization capability
1919 If there are commands to set and clear tab stops, they can
1920 be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
1921 stop in the current column of every row). If a more com-
1922 plex sequence is needed to set the tabs than can be
1923 described by this, the sequence can be placed in <STRONG>is2</STRONG> or
1924 <STRONG>if</STRONG>.
1926 <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
1927 Many older and slower terminals do not support either
1928 XON/XOFF or DTR handshaking, including hard copy terminals
1929 and some very archaic CRTs (including, for example, DEC
1930 VT100s). These may require padding characters after cer-
1931 tain cursor motions and screen changes.
1933 If the terminal uses xon/xoff handshaking for flow control
1934 (that is, it automatically emits ^S back to the host when
1935 its input buffers are close to full), set <STRONG>xon</STRONG>. This capa-
1936 bility suppresses the emission of padding. You can also
1937 set it for memory-mapped console devices effectively that
1938 do not have a speed limit. Padding information should
1939 still be included so that routines can make better deci-
1940 sions about relative costs, but actual pad characters will
1943 If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
1944 at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
1945 padding baud rate, then whether padding is emitted or not
1946 is completely controlled by <STRONG>xon</STRONG>.
1948 If the terminal requires other than a null (zero) charac-
1949 ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
1950 first character of the <STRONG>pad</STRONG> string is used.
1952 <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
1953 Some terminals have an extra `status line' which is not
1954 normally used by software (and thus not counted in the
1955 terminal's <STRONG>lines</STRONG> capability).
1957 The simplest case is a status line which is cursor-
1958 addressable but not part of the main scrolling region on
1959 the screen; the Heathkit H19 has a status line of this
1960 kind, as would a 24-line VT100 with a 23-line scrolling
1961 region set up on initialization. This situation is indi-
1962 cated by the <STRONG>hs</STRONG> capability.
1964 Some terminals with status lines need special sequences to
1965 access the status line. These may be expressed as a
1966 string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
1967 a given zero-origin column on the status line. The capa-
1968 bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
1969 before the last <STRONG>tsl</STRONG>. You may need to embed the string
1970 values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
1971 and <STRONG>fsl</STRONG> to accomplish this.
1973 The status line is normally assumed to be the same width
1974 as the width of the terminal. If this is untrue, you can
1975 specify it with the numeric capability <STRONG>wsl</STRONG>.
1977 A command to erase or blank the status line may be speci-
1978 fied as <STRONG>dsl</STRONG>.
1980 The boolean capability <STRONG>eslok</STRONG> specifies that escape
1981 sequences, tabs, etc., work ordinarily in the status line.
1983 The <STRONG>ncurses</STRONG> implementation does not yet use any of these
1984 capabilities. They are documented here in case they ever
1987 <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
1988 Many terminals have alternate character sets useful for
1989 forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
1990 the drawing characters supported by the VT100, with some
1991 characters from the AT&T 4410v1 added. This alternate
1992 character set may be specified by the <STRONG>acsc</STRONG> capability.
1994 <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
1995 <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
1996 UK pound sign ACS_STERLING f }
1997 arrow pointing down ACS_DARROW v .
1998 arrow pointing left ACS_LARROW < ,
1999 arrow pointing right ACS_RARROW > +
2000 arrow pointing up ACS_UARROW ^ -
2001 board of squares ACS_BOARD # h
2002 bullet ACS_BULLET o ~
2003 checker board (stipple) ACS_CKBOARD : a
2004 degree symbol ACS_DEGREE \ f
2005 diamond ACS_DIAMOND + `
2006 greater-than-or-equal-to ACS_GEQUAL > z
2008 horizontal line ACS_HLINE - q
2009 lantern symbol ACS_LANTERN # i
2010 large plus or crossover ACS_PLUS + n
2011 less-than-or-equal-to ACS_LEQUAL < y
2012 lower left corner ACS_LLCORNER + m
2013 lower right corner ACS_LRCORNER + j
2014 not-equal ACS_NEQUAL ! |
2015 plus/minus ACS_PLMINUS # g
2016 scan line 1 ACS_S1 ~ o
2017 scan line 3 ACS_S3 - p
2018 scan line 7 ACS_S7 - r
2019 scan line 9 ACS_S9 _ s
2020 solid square block ACS_BLOCK # 0
2021 tee pointing down ACS_TTEE + w
2022 tee pointing left ACS_RTEE + u
2023 tee pointing right ACS_LTEE + t
2024 tee pointing up ACS_BTEE + v
2025 upper left corner ACS_ULCORNER + l
2026 upper right corner ACS_URCORNER + k
2027 vertical line ACS_VLINE | x
2029 The best way to define a new device's graphics set is to
2030 add a column to a copy of this table for your terminal,
2031 giving the character which (when emitted between
2032 <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
2033 ing graphic. Then read off the VT100/your terminal char-
2034 acter pairs right to left in sequence; these become the
2037 <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
2038 Most color terminals are either `Tektronix-like' or `HP-
2039 like'. Tektronix-like terminals have a predefined set of
2040 N colors (where N usually 8), and can set character-cell
2041 foreground and background characters independently, mixing
2042 them into N * N color-pairs. On HP-like terminals, the
2043 use must set each color pair up separately (foreground and
2044 background are not independently settable). Up to M
2045 color-pairs may be set up from 2*M different colors.
2046 ANSI-compatible terminals are Tektronix-like.
2048 Some basic color capabilities are independent of the color
2049 method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
2050 the maximum numbers of colors and color-pairs that can be
2051 displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
2052 resets foreground and background colors to their default
2053 values for the terminal. The <STRONG>oc</STRONG> string resets all colors
2054 or color-pairs to their default values for the terminal.
2055 Some terminals (including many PC terminal emulators)
2056 erase screen areas with the current background color
2057 rather than the power-up default background; these should
2058 have the boolean capability <STRONG>bce</STRONG>.
2060 To change the current foreground or background color on a
2061 Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
2062 and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
2063 and <STRONG>setb</STRONG> (set background). These take one parameter, the
2064 color number. The SVr4 documentation describes only
2065 <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
2066 supports ANSI escape sequences to set background and fore-
2067 ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
2068 tively. If the terminal supports other escape sequences
2069 to set background and foreground, they should be coded as
2070 <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
2071 the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
2074 The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
2075 numeric argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>
2076 are portably defined as follows (the middle column is the
2077 symbolic #define available in the header for the <STRONG>curses</STRONG> or
2078 <STRONG>ncurses</STRONG> libraries). The terminal hardware is free to map
2079 these as it likes, but the RGB values indicate normal
2080 locations in color space.
2082 <STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
2083 black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
2084 red <STRONG>COLOR_RED</STRONG> 1 max,0,0
2085 green <STRONG>COLOR_GREEN</STRONG> 2 0,max,0
2086 yellow <STRONG>COLOR_YELLOW</STRONG> 3 max,max,0
2087 blue <STRONG>COLOR_BLUE</STRONG> 4 0,0,max
2088 magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
2089 cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
2090 white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
2092 The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
2093 to a different mapping, i.e.,
2095 <STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
2096 black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
2097 blue <STRONG>COLOR_BLUE</STRONG> 1 0,0,max
2098 green <STRONG>COLOR_GREEN</STRONG> 2 0,max,0
2099 cyan <STRONG>COLOR_CYAN</STRONG> 3 0,max,max
2100 red <STRONG>COLOR_RED</STRONG> 4 max,0,0
2101 magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
2102 yellow <STRONG>COLOR_YELLOW</STRONG> 6 max,max,0
2103 white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
2105 It is important to not confuse the two sets of color capa-
2106 bilities; otherwise red/blue will be interchanged on the
2109 On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
2110 parameter to set which color pair is current.
2112 On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
2113 present to indicate that colors can be modified. If so,
2114 the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
2115 - 1)and three more parameters which describe the color.
2116 These three parameters default to being interpreted as RGB
2117 (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
2118 is present, they are instead as HLS (Hue, Lightness, Satu-
2119 ration) indices. The ranges are terminal-dependent.
2121 On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
2122 changing a color-pair value. It will take seven parame-
2123 ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
2124 triples describing first background and then foreground
2125 colors. These parameters must be (Red, Green, Blue) or
2126 (Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
2128 On some color terminals, colors collide with highlights.
2129 You can register these collisions with the <STRONG>ncv</STRONG> capability.
2130 This is a bit-mask of attributes not to be used when col-
2131 ors are enabled. The correspondence with the attributes
2132 understood by <STRONG>curses</STRONG> is as follows:
2134 <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG>
2145 For example, on many IBM PC consoles, the underline
2146 attribute collides with the foreground color blue and is
2147 not available in color mode. These should have an <STRONG>ncv</STRONG>
2150 SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
2151 and optimizes the output in favor of colors.
2153 <STRONG>Miscellaneous</STRONG>
2154 If the terminal requires other than a null (zero) charac-
2155 ter as a pad, then this can be given as pad. Only the
2156 first character of the pad string is used. If the termi-
2157 nal does not have a pad character, specify npc. Note that
2158 ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
2159 though the application may set this value to something
2160 other than a null, ncurses will test <STRONG>npc</STRONG> first and use
2161 napms if the terminal has no pad character.
2163 If the terminal can move up or down half a line, this can
2164 be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
2165 down). This is primarily useful for superscripts and sub-
2166 scripts on hard-copy terminals. If a hard-copy terminal
2167 can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
2168 (usually control L).
2170 If there is a command to repeat a given character a given
2171 number of times (to save time transmitting a large number
2172 of identical characters) this can be indicated with the
2173 parameterized string <STRONG>rep</STRONG>. The first parameter is the
2174 character to be repeated and the second is the number of
2175 times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
2176 the same as `xxxxxxxxxx'.
2178 If the terminal has a settable command character, such as
2179 the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
2180 prototype command character is chosen which is used in all
2181 capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
2182 bility to identify it. The following convention is sup-
2183 ported on some UNIX systems: The environment is to be
2184 searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
2185 of the prototype character are replaced with the character
2186 in the environment variable.
2188 Terminal descriptions that do not represent a specific
2189 kind of known terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and
2190 <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
2191 that programs can complain that they do not know how to
2192 talk to the terminal. (This capability does not apply to
2193 <EM>virtual</EM> terminal descriptions for which the escape
2194 sequences are known.)
2196 If the terminal has a "meta key" which acts as a shift
2197 key, setting the 8th bit of any character transmitted,
2198 this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
2199 will assume that the 8th bit is parity and it will usually
2200 be cleared. If strings exist to turn this "meta mode" on
2201 and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
2203 If the terminal has more lines of memory than will fit on
2204 the screen at once, the number of lines of memory can be
2205 indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
2206 number of lines is not fixed, but that there is still more
2207 memory than fits on the screen.
2209 If the terminal is one of those supported by the UNIX vir-
2210 tual terminal protocol, the terminal number can be given
2211 as <STRONG>vt</STRONG>.
2213 Media copy strings which control an auxiliary printer con-
2214 nected to the terminal can be given as <STRONG>mc0</STRONG>: print the con-
2215 tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
2216 turn on the printer. When the printer is on, all text
2217 sent to the terminal will be sent to the printer. It is
2218 undefined whether the text is also displayed on the termi-
2219 nal screen when the printer is on. A variation <STRONG>mc5p</STRONG> takes
2220 one parameter, and leaves the printer on for as many char-
2221 acters as the value of the parameter, then turns the
2222 printer off. The parameter should not exceed 255. All
2223 text, including <STRONG>mc4</STRONG>, is transparently passed to the
2224 printer while an <STRONG>mc5p</STRONG> is in effect.
2226 <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
2227 Hazeltine terminals, which do not allow `~' characters to
2228 be displayed should indicate <STRONG>hz</STRONG>.
2230 Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
2231 wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
2233 If <STRONG>el</STRONG> is required to get rid of standout (instead of
2234 merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
2237 Teleray terminals, where tabs turn all characters moved
2238 over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
2239 Note: the variable indicating this is now
2240 `dest_tabs_magic_smso'; in older versions, it was tel-
2241 eray_glitch. This glitch is also taken to mean that it is
2242 not possible to position the cursor on top of a "magic
2243 cookie", that to erase standout mode it is instead neces-
2244 sary to use delete and insert line. The ncurses implemen-
2245 tation ignores this glitch.
2247 The Beehive Superbee, which is unable to correctly trans-
2248 mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
2249 ing that the f1 key is used for escape and f2 for control
2250 C. (Only certain Superbees have this problem, depending
2251 on the ROM.) Note that in older terminfo versions, this
2252 capability was called `beehive_glitch'; it is now
2255 Other specific terminal problems may be corrected by
2256 adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
2258 <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
2259 If there are two very similar terminals, one (the variant)
2260 can be defined as being just like the other (the base)
2261 with certain exceptions. In the definition of the vari-
2262 ant, the string capability <STRONG>use</STRONG> can be given with the name
2263 of the base terminal. The capabilities given before <STRONG>use</STRONG>
2264 override those in the base type named by <STRONG>use</STRONG>. If there
2265 are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
2266 order. That is, the rightmost <STRONG>use</STRONG> reference is processed
2267 first, then the one to its left, and so forth. Capabili-
2268 ties given explicitly in the entry override those brought
2269 in by <STRONG>use</STRONG> references.
2271 A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
2272 the use reference that imports it, where <EM>xx</EM> is the capa-
2273 bility. For example, the entry
2275 2621-nl, smkx@, rmkx@, use=2621,
2277 defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
2278 capabilities, and hence does not turn on the function key
2279 labels when in visual mode. This is useful for different
2280 modes for a terminal, or for different user preferences.
2282 <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
2283 Long terminfo entries are unlikely to be a problem; to
2284 date, no entry has even approached terminfo's 4096-byte
2285 string-table maximum. Unfortunately, the termcap transla-
2286 tions are much more strictly limited (to 1023 bytes), thus
2287 termcap translations of long terminfo entries can cause
2290 The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
2291 instruct the user to allocate a 1024-byte buffer for the
2292 termcap entry. The entry gets null-terminated by the
2293 termcap library, so that makes the maximum safe length for
2294 a termcap entry 1k-1 (1023) bytes. Depending on what the
2295 application and the termcap library being used does, and
2296 where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
2297 is searching for is, several bad things can happen.
2299 Some termcap libraries print a warning message or exit if
2300 they find an entry that's longer than 1023 bytes; others
2301 do not; others truncate the entries to 1023 bytes. Some
2302 application programs allocate more than the recommended 1K
2303 for the termcap entry; others do not.
2305 Each termcap entry has two important sizes associated with
2306 it: before "tc" expansion, and after "tc" expansion. "tc"
2307 is the capability that tacks on another termcap entry to
2308 the end of the current one, to add on its capabilities.
2309 If a termcap entry does not use the "tc" capability, then
2310 of course the two lengths are the same.
2312 The "before tc expansion" length is the most important
2313 one, because it affects more than just users of that par-
2314 ticular terminal. This is the length of the entry as it
2315 exists in /etc/termcap, minus the backslash-newline pairs,
2316 which <STRONG>tgetent()</STRONG> strips out while reading it. Some termcap
2317 libraries strip off the final newline, too (GNU termcap
2318 does not). Now suppose:
2320 <STRONG>o</STRONG> a termcap entry before expansion is more than 1023
2323 <STRONG>o</STRONG> and the application has only allocated a 1k buffer,
2325 <STRONG>o</STRONG> and the termcap library (like the one in BSD/OS 1.1
2326 and GNU) reads the whole entry into the buffer, no
2327 matter what its length, to see if it is the entry it
2330 <STRONG>o</STRONG> and <STRONG>tgetent()</STRONG> is searching for a terminal type that
2331 either is the long entry, appears in the termcap file
2332 after the long entry, or does not appear in the file
2333 at all (so that <STRONG>tgetent()</STRONG> has to search the whole
2336 Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
2337 and probably core dump the program. Programs like telnet
2338 are particularly vulnerable; modern telnets pass along
2339 values like the terminal type automatically. The results
2340 are almost as undesirable with a termcap library, like
2341 SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
2342 when it reads an overly long termcap entry. If a termcap
2343 library truncates long entries, like OSF/1 3.0, it is
2344 immune to dying here but will return incorrect data for
2347 The "after tc expansion" length will have a similar effect
2348 to the above, but only for people who actually set TERM to
2349 that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
2350 sion once it is found the terminal type it was looking
2351 for, not while searching.
2353 In summary, a termcap entry that is longer than 1023 bytes
2354 can cause, on various combinations of termcap libraries
2355 and applications, a core dump, warnings, or incorrect
2356 operation. If it is too long even before "tc" expansion,
2357 it will have this effect even for users of some other ter-
2358 minal types and users whose TERM variable does not have a
2361 When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
2362 mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
2363 tc length of a termcap translation is too long. The -c
2364 (check) option also checks resolved (after tc expansion)
2367 <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
2368 It is not wise to count on portability of binary terminfo
2369 entries between commercial UNIX versions. The problem is
2370 that there are at least two versions of terminfo (under
2371 HP-UX and AIX) which diverged from System V terminfo after
2372 SVr1, and have added extension capabilities to the string
2373 table that (in the binary format) collide with System V
2374 and XSI Curses extensions.
2378 <H2>EXTENSIONS</H2><PRE>
2379 Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
2380 TERMINFO_DIRS is not supported by older implementations.
2382 Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
2383 SVr4, do not interpret the %A and %O operators in parame-
2386 SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
2387 while in an alternate-character-set mode (such modes may,
2388 among other things, map CR and NL to characters that do
2389 not trigger local motions). The <STRONG>ncurses</STRONG> implementation
2390 ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
2391 bility that an XPG4 implementation making the opposite
2392 interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
2393 to have <STRONG>msgr</STRONG> turned off.
2395 The <STRONG>ncurses</STRONG> library handles insert-character and insert-
2396 character modes in a slightly non-standard way to get bet-
2397 ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
2400 The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
2401 <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
2402 standard. They are deduced from the documentation for the
2403 AT&T 505 terminal.
2405 Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
2406 wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
2407 and emulators like xterm that can return mouse-tracking
2408 information in the keyboard-input stream.
2410 Different commercial ports of terminfo and curses support
2411 different subsets of the XSI Curses standard and (in some
2412 cases) different extension sets. Here is a summary, accu-
2413 rate as of October 1995:
2415 <STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabili-
2418 <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
2419 extended string capability (<STRONG>set_pglen</STRONG>).
2421 <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
2422 minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
2423 numerics with <STRONG>width_status_line</STRONG>; and the strings with
2424 <STRONG>prtr_non</STRONG>.
2426 <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
2427 numerics <STRONG>num_labels</STRONG>, <STRONG>label_height</STRONG>, <STRONG>label_width</STRONG>, plus func-
2428 tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
2429 <STRONG>label_off</STRONG>, plus some incompatible extensions in the string
2432 <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
2433 through 63, plus a number of incompatible string table
2436 <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
2441 /usr/share/terminfo/?/* files containing terminal
2446 <H2>SEE ALSO</H2><PRE>
2447 <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
2448 <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
2452 <H2>AUTHORS</H2><PRE>
2453 Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
2454 Based on pcurses by Pavel Curtis.
2458 <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
2462 Man(1) output converted with
2463 <a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>