1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2014/06/09 21:40:50 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### Atari ST terminals
703 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
705 tw52|tw52-color|Toswin window manager with color,
707 colors#16, pairs#256,
708 oc=\Eb?\Ec0, op=\Eb?\Ec0,
709 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
710 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
711 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 tw52-m|Toswin window manager monochrome,
717 bold=\Eya, dch1=\Ea, dim=\EyB,
718 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
719 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
720 smso=\EyQ, smul=\EyH, use=at-m,
721 tt52|Atari TT medium and high resolution,
722 lines#30, use=at-color,
723 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
725 colors#16, pairs#256,
726 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
727 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
728 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
729 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
734 cols#80, it#8, lines#24,
735 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
736 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
737 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
738 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
739 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
740 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
741 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
742 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
743 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
744 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
745 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
746 tw100|toswin vt100 window mgr,
748 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
749 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
750 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
751 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
753 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
754 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
755 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
756 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
757 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
758 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
759 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
760 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
761 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
762 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
763 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
764 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
765 rmso=\E[m, rmul=\E[m,
766 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
768 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
769 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
770 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
771 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
772 # The entries for stv52 and stv52pc probably need a revision.
773 stv52|MiNT virtual console,
775 cols#80, it#8, lines#30,
776 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
777 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
779 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
780 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
781 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
782 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
783 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
784 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
785 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
786 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
787 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
788 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
789 stv52pc|MiNT virtual console with PC charset,
791 cols#80, it#8, lines#30,
792 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
793 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
794 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
796 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
797 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
798 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
799 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
800 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
801 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
802 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
803 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
804 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
807 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
810 cols#80, it#8, lines#25,
811 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
813 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
814 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
815 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
816 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
817 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
819 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
821 # MiNT VT52 emulation. 80 columns, 25 rows.
822 # MiNT is Now TOS, the operating system which comes with all Ataris now
823 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
824 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
825 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
826 st52-old|Atari ST with VT52 emulation,
829 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
830 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
831 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
832 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
833 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
834 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
835 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
836 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
837 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
840 #### Apple Terminal.app
842 # nsterm*|Apple_Terminal - AppKit Terminal.app
844 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
845 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
846 # Server and Mac OS X operating systems. There is also a
847 # "terminal.app" in GNUStep, but I believe it to be an unrelated
848 # codebase and I have not attempted to describe it here.
850 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
851 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
852 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
853 # version supports color.
855 # To determine the version of Terminal.app you're using by running:
857 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
859 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
861 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
863 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
865 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
867 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
869 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
870 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
871 # might work too, but really you're on your own here since these
872 # systems are very obsolete and I can't test them. I do welcome
873 # patches, though :).
877 # For GNUstep_Terminal, you're probably best off using "linux" or
878 # writing your own terminfo.
880 # For MacTelnet, you're on your own. It's a different codebase, and
881 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
883 # For iTerm.app, see "iterm".
886 # The AppKit Terminal.app descriptions all have names beginning with
887 # "nsterm". Note that the statusline (-s) versions use the window
888 # titlebar as a phony status line, and may produce warnings during
889 # compilation as a result ("tsl uses 0 parameters, expected 1".)
890 # Ignore these warnings, or even ignore these entries entirely. Apps
891 # which need to position the cursor or do other fancy stuff inside the
892 # status line won't work with these entries. They're primarily useful
893 # for programs like Pine which provide simple notifications in the
894 # status line. Please note that non-ASCII characters don't work right
895 # in the status line, since Terminal.app incorrectly interprets their
896 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
897 # versions) or only accepts status lines consisting entirely of
898 # characters from the first 256 Unicode positions (including C1 but
901 # The Mythology* of AppKit Terminal.app:
903 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
904 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
905 # shareware replacement for Terminal called "Stuart" which NeXT bought
906 # and used as the basis for the Terminal.app in NeXTstep 2+,
907 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
908 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
909 # capabilities for the early versions, but I believe that the
910 # TERM_PROGRAM_VERSION may have been reset at some point.
912 # The early versions were tailored to the NeXT character set. Sometime
913 # after the Apple aquisition the encoding was swiched to MacRoman
914 # (initally with serious altcharset bugs due to incomplete conversion
915 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
916 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
917 # 8-color support (initially buggy when combined with attributes, but
918 # that was later fixed.) More recently, around Mac OS X version 10.3
919 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
920 # some versions (for instance 133-1 which shipped with Mac OS X
921 # version 10.4) this suffered from the <bce> bug, but that seems to
922 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
924 # In the early days of Mac OS X the terminal was fairly buggy and
925 # would routinely crash under load. Many of these bugs seem to have
926 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
927 # some may still remain. This change seems to correspond to
928 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
931 # * This may correspond with what actually happened, but I don't
932 # know. It is based on guesswork, hearsay, private correspondence,
933 # my faulty memory, and the following online sources and references:
935 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
936 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
938 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
939 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
941 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
942 # "nsterm" to comply with the name length and case conventions and
943 # limitations of various software packages [notably Solaris terminfo
944 # and UNIX.] A single Apple_Terminal alias is retained for
945 # backwards-compatbility.
947 # * Added function key support (F1-F4). These only work in Terminal.app
948 # version 51, hopefully the capabilities won't cause problems for people
951 # * Added "full color" (-c) entries which support the 16-color mode in
954 # * By default, version 51 uses UTF-8 encoding with broken altcharset
955 # support, so "ASCII" (-7) entries without altcharset support were
958 # nsterm - AppKit Terminal.app
960 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
961 # Terminal.app. It is a partial VT100 emulation with some xterm-like
962 # extensions. This terminfo was written to describe versions 41
963 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
964 # version 10.1) of Terminal.app.
966 # Terminal.app runs under the Mac OS X Quartz windowing system (and
967 # other AppKit-supported windowing systems.) On the Mac OS X machine I
968 # use, the executable for Terminal.app is:
969 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
971 # If you're looking for a description of the full-screen system
972 # console which runs under Apple's Darwin operating system on PowerPC
973 # platforms, see the "xnuppc" entry instead.
975 # There were no function keys in version 41. In version 51, there are
976 # four working function keys (F1, F2, F3 and F4.) The function keys
977 # are included in all of these entries.
979 # It does not support mouse pointer position reporting. Under some
980 # circumstances the cursor can be positioned using option-click; this
981 # works by comparing the cursor position and the selected position,
982 # and simulating enough cursor-key presses to move the cursor to the
983 # selected position. This technique fails in all but the simplest
986 # It provides partial ANSI color support (background colors interacted
987 # badly with bold in version 41, though, as reflected in :ncv:.) The
988 # monochrome (-m) entries are useful if you've disabled color support
989 # or use a monochrome monitor. The full color (-c) entries are useful
990 # in version 51, which doesn't exhibit the background color bug. They
991 # also enable an xterm-compatible 16-color mode.
993 # The configurable titlebar is set using xterm-compatible sequences;
994 # it is used as a status bar in the statusline (-s) entries. Its width
995 # depends on font sizes and window sizes, but 50 characters seems to
996 # be the default for an 80x24 window.
998 # The MacRoman character encoding is used for some of the alternate
999 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1000 # disable alternate character set support entirely, and the "VT100"
1001 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1002 # graphics emulation, which seems to think the character encoding is
1003 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1004 # are useful in Terminal.app version 51, which supports UTF-8 and
1005 # other ASCII-compatible character encodings but does not correctly
1006 # implement VT100 graphics; once VT100 graphics are correctly
1007 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1008 # usable in any ASCII-compatible character encoding [except perhaps
1009 # in UTF-8, where some experts argue for disallowing alternate
1010 # characters entirely.]
1012 # Terminal.app reports "vt100" as the terminal type, but exports
1013 # several environment variables which may aid detection in a shell
1014 # profile (i.e. .profile or .login):
1017 # TERM_PROGRAM=Apple_Terminal
1018 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1019 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1021 # For example, the following Bourne shell script would detect the
1022 # correct terminal type:
1024 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1027 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1035 # In a C shell derivative, this would be accomplished by:
1037 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1038 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1039 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1040 # setenv TERM "nsterm-old"
1042 # setenv TERM "nsterm-c-7"
1047 # The '+' entries are building blocks
1048 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1049 am, bw, msgr, xenl, xon,
1050 cols#80, it#8, lines#24,
1051 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1052 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1053 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1054 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1055 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1056 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
1057 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
1058 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1059 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1060 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1061 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
1062 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1063 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1065 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1067 enacs=\E(B\E)0, rmacs=^O,
1068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1069 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1071 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1072 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
1073 enacs=\E(B\E)0, rmacs=^O,
1074 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1075 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1077 # compare with xterm+sl-twm
1078 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1079 wsl#50, use=xterm+sl-twm,
1081 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1082 op=\E[0m, use=ibm+16color,
1084 nsterm+c41|AppKit Terminal.app v41 color support,
1085 colors#8, ncv#37, pairs#64,
1086 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1088 # These are different combinations of the building blocks
1090 # ASCII charset (-7)
1091 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1094 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1095 use=nsterm+s, use=nsterm+7,
1097 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1098 use=nsterm+c41, use=nsterm+7,
1100 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1101 use=nsterm+c, use=nsterm+7,
1103 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1104 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1106 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1107 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1109 # VT100 alternate-charset (-acs)
1110 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1113 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1114 use=nsterm+s, use=nsterm+acs,
1116 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1117 use=nsterm+c41, use=nsterm+acs,
1119 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1120 use=nsterm+c, use=nsterm+acs,
1122 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1123 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1125 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1126 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1129 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1132 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1133 use=nsterm+s, use=nsterm+mac,
1135 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1136 use=nsterm+c41, use=nsterm+mac,
1138 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1139 use=nsterm+c, use=nsterm+mac,
1141 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1142 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1144 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1145 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1147 # In Mac OS X version 10.5 the format of the preferences has changed
1148 # and a new, more complex technique is needed, e.g.,
1150 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1151 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1152 # ud.init();prefs=ud.persistentDomainForName_(
1153 # "com.apple.Terminal");prefs["Window Settings"][
1154 # prefs["Default Window Settings"]]["TerminalType"
1155 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1156 # "com.apple.Terminal")' nsterm-16color
1158 # and it is still not settable from the preferences dialog. This is
1159 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1160 # in Apple's bug reporter.
1162 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1163 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1164 # vt52, vt100, vt102 and xterm.
1165 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1167 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1168 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1169 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1170 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1171 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1172 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1173 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1174 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1175 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1176 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1178 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1179 # the background color erase feature. The newer version 240.2 in Mac OS X
1180 # version 10.5 does not.
1182 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1183 # and D P Schreber comparing to nsterm-c-s-acs.
1185 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1186 # can be set in Terminal.app, e.g.,
1188 # defaults write com.apple.Terminal TermCapString nsterm-bce
1190 # and that it is not set in Terminal's preferences dialog.
1192 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1195 # * The terminal description matches the default settings.
1196 # * The keyboard is configurable via a dialog.
1197 # * By default khome, kend, knext and kprev are honored only with a
1199 # * There are bindings for control left/right arrow (but not up/down).
1200 # Added those to nsterm-16color, which is the version used for OS X 10.6
1201 # * "Allow VT100 application keypage mode" is by default disabled.
1202 # There is no way to press keypad-comma unless application mode is enabled
1204 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1205 # * CHT, REP, SU, SD are buggy.
1206 # * ECH works (also in Leopard), but is not used here for compatibility.
1207 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1208 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1209 # nsterm entry from this file to override the MacPorts (20110404) or
1210 # system (20081102) copy of this file.
1211 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1212 # dialog defaults to xterm-256color. Alternative selections are ansi,
1213 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1214 # the menu says "Declare terminal as" without promising to actually emulate
1215 # the corresponding terminals. Indeed, changing TERM does not affect the
1216 # emulation itself. This means that
1217 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1219 # + the color model is the same for each setting of TERM (does not match
1221 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1222 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1223 # + the vt52 emulation does not give a usable shell because screen-clearing
1224 # does not work as expected.
1225 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1226 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1227 bce, use=nsterm-16color,
1229 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1230 # TERM_PROGRAM_VERSION=309
1231 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1232 # TERM_PROGRAM_VERSION=303
1233 nsterm-256color|Terminal.app in OS X 10.8,
1234 use=xterm+256setaf, use=nsterm-bce,
1236 # This is an alias which should always point to the "current" version
1237 nsterm|Apple_Terminal|AppKit Terminal.app,
1238 use=nsterm-256color,
1240 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1241 # more featureful) terminal emulator for Mac OS X. It is similar
1242 # enough in capabilities to nsterm-16color that I have derived this
1243 # description from that one, but as far as I know they share no code.
1244 # Many of the features are user-configurable, but I attempt only to
1245 # describe the default configuration.
1247 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1249 iTerm.app|iTerm.app terminal emulator for Mac OS X,
1251 csr@, kend=\EOF, khome=\EOH, use=xterm+256setaf,
1254 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1256 # On PowerPC platforms, Apple's Darwin operating system uses a
1257 # full-screen system console derived from a NetBSD framebuffer
1258 # console. It is an ANSI-style terminal, and is not really VT-100
1261 # Under Mac OS X, this is the system console driver used while in
1262 # single-user mode [reachable by holding down Command-S during the
1263 # boot process] and when logged in using console mode [reachable by
1264 # typing ">console" at the graphical login prompt.]
1266 # If you're looking for a description of the Terminal.app terminal
1267 # emulator which runs under the Mac OS X Quartz windowing system (and
1268 # other AppKit-supported windowing systems,) see the "nsterm"
1271 # NOTE: Under Mac OS X version 10.1, the default login window does not
1272 # prompt for user name, instead requiring an icon to be selected from
1273 # a list of known users. Since the special ">console" login is not in
1274 # this list, you must make one of two changes in the Login Window
1275 # panel of the Login section of System Prefs to make the special
1276 # ">console" login accessible. The first option is to enable 'Show
1277 # "Other User" in list for network users', which will add a special
1278 # "Other..." icon to the graphical login panel. Selecting "Other..."
1279 # will present the regular graphical login prompt. The second option
1280 # is to change the 'Display Login Window as:' setting to 'Name and
1281 # password entry fields', which replaces the login panel with a
1282 # graphical login prompt.
1284 # There are no function keys, at least not in Darwin 1.3.
1286 # It has no mouse support.
1288 # It has full ANSI color support, and color combines correctly with
1289 # all three supported attributes: bold, inverse-video and underline.
1290 # However, bold colored text is almost unreadable (bolding is
1291 # accomplished using shifting and or-ing, and looks smeared) so bold
1292 # has been excluded from the list of color-compatible attributes
1293 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1294 # monochrome monitor.
1296 # There is one serious bug with this terminal emulation's color
1297 # support: repositioning the cursor onto a cell with non-matching
1298 # colors obliterates that cell's contents, replacing it with a blank
1299 # and displaying a colored cursor in the "current" colors. There is
1300 # no complete workaround at present [other than using the monochrome
1301 # (-m) entries,] but removing the (msgr) capability seemed to help.
1303 # The "standout" chosen was simple reverse-video, although a colorful
1304 # standout might be more aesthetically pleasing. Similarly, the bold
1305 # chosen is the terminal's own smeared bold, although a simple
1306 # color-change might be more readable. The color-bold (-b) entries
1307 # uses magenta colored text for bolding instead. The fancy color (-f
1308 # and -f2) entries use color for bold, standout and underlined text
1309 # (underlined text is still underlined, though.)
1311 # Apparently the terminal emulator does support a VT-100-style
1312 # alternate character set, but all the alternate character set
1313 # positions have been left blank in the font. For this reason, no
1314 # alternate character set capabilities have been included in this
1315 # description. The console driver appears to be ASCII-only, so (enacs)
1316 # has been excluded [although the VT-100 sequence does work.]
1318 # The default Mac OS X and Darwin installation reports "vt100" as the
1319 # terminal type, and exports no helpful environment variables. To fix
1320 # this, change the "console" entry in /etc/ttys from "vt100" to
1321 # "xnuppc-WxH", where W and H are the character dimensions of your
1322 # console (see below.)
1324 # The font used by the terminal emulator is apparently one originally
1325 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1326 # file includes descriptions for the following geometries:
1328 # Pixels Characters Entry Name (append -m for monochrome)
1329 # -------------------------------------------------------------------
1330 # 640x400 80x25 xnuppc-80x25
1331 # 640x480 80x30 xnuppc-80x30
1332 # 720x480 90x30 xnuppc-90x30
1333 # 800x600 100x37 xnuppc-100x37
1334 # 896x600 112x37 xnuppc-112x37
1335 # 1024x640 128x40 xnuppc-128x40
1336 # 1024x768 128x48 xnuppc-128x48
1337 # 1152x768 144x48 xnuppc-144x48
1338 # 1280x1024 160x64 xnuppc-160x64
1339 # 1600x1024 200x64 xnuppc-200x64
1340 # 1600x1200 200x75 xnuppc-200x75
1341 # 2048x1536 256x96 xnuppc-256x96
1343 # The basic "xnuppc" entry includes no size information, and the
1344 # emulator includes no reporting capability, so you'll be at the mercy
1345 # of the TTY device (which reports incorrectly on my hardware.) The
1346 # color-bold entries do not include size information.
1348 # The '+' entries are building blocks
1349 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1352 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1353 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1354 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1355 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1356 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1357 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1358 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1359 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1361 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1362 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1363 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1365 xnuppc+c|Darwin PowerPC Console ANSI color support,
1366 colors#8, ncv#32, pairs#64,
1367 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1369 xnuppc+b|Darwin PowerPC Console color-bold support,
1372 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1375 xnuppc+f|Darwin PowerPC Console fancy color support,
1377 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
1378 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1380 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1383 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1384 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1386 # Building blocks for specific screen sizes
1387 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1390 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1393 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1396 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1399 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1402 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1405 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1408 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1411 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1414 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1417 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1420 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1423 # These are different combinations of the building blocks
1425 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1428 xnuppc|darwin|Darwin PowerPC Console (color),
1429 use=xnuppc+c, use=xnuppc+basic,
1431 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1434 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1435 use=xnuppc+b, use=xnuppc+c,
1437 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1440 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1441 use=xnuppc+f, use=xnuppc+c,
1443 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1446 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1447 use=xnuppc+f2, use=xnuppc+c,
1449 # Combinations for specific screen sizes
1450 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1451 use=xnuppc+80x25, use=xnuppc+basic,
1453 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1454 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1456 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1457 use=xnuppc+80x30, use=xnuppc+basic,
1459 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1460 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1462 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1463 use=xnuppc+90x30, use=xnuppc+basic,
1465 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1466 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1468 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1469 use=xnuppc+100x37, use=xnuppc+basic,
1471 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1472 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1474 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1475 use=xnuppc+112x37, use=xnuppc+basic,
1477 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1478 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1480 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1481 use=xnuppc+128x40, use=xnuppc+basic,
1483 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1484 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1486 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1487 use=xnuppc+128x48, use=xnuppc+basic,
1489 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1490 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1492 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1493 use=xnuppc+144x48, use=xnuppc+basic,
1495 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1496 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1498 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1499 use=xnuppc+160x64, use=xnuppc+basic,
1501 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1502 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1504 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1505 use=xnuppc+200x64, use=xnuppc+basic,
1507 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1508 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1510 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1511 use=xnuppc+200x75, use=xnuppc+basic,
1513 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1514 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1516 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1517 use=xnuppc+256x96, use=xnuppc+basic,
1519 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1520 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1525 # BeOS entry for Terminal program Seems to be almost ANSI
1526 beterm|BeOS Terminal,
1527 am, eo, mir, msgr, xenl, xon,
1528 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1529 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1530 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1531 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1532 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1533 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1534 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1535 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1536 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1537 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1538 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1539 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1540 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1541 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1542 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1543 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1544 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1545 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1546 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1547 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1553 # This entry is good for the 1.2.13 or later version of the Linux console.
1555 # ***************************************************************************
1558 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1559 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1560 # * character. Here are the keymap replacement lines that will set this up: *
1562 # keycode 15 = Tab Tab
1563 # alt keycode 15 = Meta_Tab
1564 # shift keycode 15 = F26
1565 # string F26 ="\033[Z"
1567 # * This has to use a key slot which is unfortunate (any unused one will *
1568 # * do, F26 is the higher-numbered one). The change ought to be built *
1569 # * into the kernel tables. *
1571 # ***************************************************************************
1573 # All linux kernels since 1.2.13 (at least) set the screen size
1574 # themselves; this entry assumes that capability.
1576 linux-basic|linux console,
1577 am, bce, eo, mir, msgr, xenl, xon,
1579 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1580 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1581 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1582 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1583 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1584 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1585 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
1586 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1587 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1588 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1589 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1590 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1591 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1592 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1593 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1594 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1595 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1596 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1597 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1598 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1599 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1602 linux-m|Linux console no color,
1604 setab@, setaf@, setb@, setf@, use=linux,
1606 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1607 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1608 # not supposedly back-portable to older SV curses (although it has worked fine
1609 # on Solaris for several years) and not supported in ncurses versions before
1611 linux-c-nc|linux console with color-change,
1613 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
1614 oc=\E]R, use=linux-basic,
1615 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1616 linux-c|linux console 1.3.6+ for older ncurses,
1618 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
1619 oc=\E]R, use=linux-basic,
1621 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1622 # get a block cursor for cvvis.
1623 # reported by Frank Heckenbach <frank@g-n-u.de>.
1624 linux2.2|linux 2.2.x console,
1625 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1626 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1628 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1629 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
1630 # Using SI/SO has the drawback that it confuses screen. SCS would work.
1631 # However, SCS is buggy (see comment in Debian #515609) -TD
1632 # Further, this breaks longstanding workarounds for Linux console's line
1633 # drawing (see Debian 665959) -TD
1634 linux2.6|linux 2.6.x console,
1636 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1637 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1639 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1640 # It is the same as xterm's erase-saved-lines feature.
1641 linux3.0|linux 3.0 kernels,
1642 E3=\E[3;J, use=linux2.6,
1644 # This is Linux console for ncurses.
1645 linux|linux console,
1648 # Subject: linux 2.6.26 vt back_color_erase
1649 # Changes to the Linux console driver broke bce model as reported in
1650 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1652 # http://lkml.org/lkml/2008/4/26/305
1653 # http://lkml.org/lkml/2008/10/3/66
1654 linux2.6.26|linux console w/o bce,
1657 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1658 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1659 ich@, ich1@, use=linux,
1661 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1662 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1663 linux-koi8|linux with koi8 alternate character set,
1664 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1665 use=linux, use=klone+koi8acs,
1667 # Another entry for KOI8-r with Qing Long's acsc.
1668 # (which one better complies with the standard?)
1669 linux-koi8r|linux with koi8-r alternate character set,
1670 use=linux, use=klone+koi8acs,
1672 # Entry for the latin1 and latin2 fonts
1673 linux-lat|linux with latin1 or latin2 alternate character set,
1674 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1677 # This uses graphics from VT codeset instead of from cp437.
1678 # reason: cp437 (aka "straight to font") is not functional under luit.
1679 # from: Andrey V Lukyanov <land@long.yar.ru>.
1680 linux-vt|linux console using VT codes for graphics,
1681 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1682 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1685 # This is based on the Linux console (relies on the console to perform some
1686 # of the functionality), but does not recognize as many control sequences.
1687 # The program comes bundled with an old (circa 1998) copy of the Linux
1688 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1689 # \E* move cursor to home, as as \E[H
1691 # \EE move cursor to beginning of row
1692 # \E[y,xf same as \E[y,xH
1694 # Note: The status-line support is buggy (dsl does not work).
1695 kon|kon2|jfbterm|Kanji ON Linux console,
1697 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1698 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1701 # 16-color linux console entry; this works with a 256-character
1702 # console font but bright background colors turn into dim ones when
1703 # you use a 512-character console font. This uses bold for bright
1704 # foreground colors and blink for bright background colors.
1705 linux-16color|linux console with 16 colors,
1706 colors#16, ncv#63, pairs#256,
1707 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1708 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1711 # bterm (bogl 0.1.18)
1712 # Implementation is in bogl-term.c
1713 # Key capabilities from linux terminfo entry
1716 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1717 # bterm does not support sgr, since it only processes one parameter -TD
1718 bterm|bogl virtual terminal,
1720 colors#8, cols#80, lines#24, pairs#64,
1721 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1722 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1723 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1724 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1725 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1726 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1727 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1728 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1729 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1730 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1731 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1732 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1733 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1734 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1739 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1742 cols#80, it#8, lines#25,
1743 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1744 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1745 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1746 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1747 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1748 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1749 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1750 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1751 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1752 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1753 smso=\E[7m, smul=\E[4m,
1754 mach-bold|Mach Console with bold instead of underline,
1755 rmul=\E[0m, smul=\E[1m, use=mach,
1756 mach-color|Mach Console with ANSI color,
1758 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1759 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1761 # From: Samuel Thibault
1762 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1763 # Files: i386/i386at/kd.c
1765 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1767 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1768 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1769 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1770 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1771 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1774 mach-gnu-color|Mach Console with ANSI color,
1776 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1777 setaf=\E[3%p1%dm, use=mach-gnu,
1779 # From: Marcus Brinkmann
1780 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1782 # Comments in the original are summarized here:
1784 # hurd uses 8-bit characters (km).
1786 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1788 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1789 # have the eat_newline_glitch. It doesn't support setting or removing tab
1792 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1793 # one byte instead three.
1795 # <ich1> is not included because hurd has insert mode.
1797 # hurd doesn't use ^J for scrolling, because this could put things into the
1798 # scrollback buffer.
1800 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1801 # This is a GNU extension.
1803 # The original has commented-out ncv, but is restored here.
1805 # Reading the source, RIS resets cnorm, but not xmous.
1806 hurd|The GNU Hurd console server,
1807 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1808 colors#8, it#8, ncv#18, pairs#64,
1809 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1810 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1811 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1812 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1813 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1814 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1815 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1816 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1817 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1818 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1819 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1820 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1821 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1822 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1823 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1824 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1825 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1826 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1827 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1828 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1829 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1830 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1831 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1832 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1833 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1840 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1841 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1842 # right corner without triggering a scroll. The ncurses terminfo library can
1843 # handle this case with the <ich1> capability, and prefers <am> for better
1844 # optimization. Bug: The <op> capability resets attributes.
1845 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1846 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1847 qnx|qnx4|qnx console,
1848 daisy, km, mir, msgr, xhpa, xt,
1849 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1850 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1851 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1852 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1853 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1854 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1855 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1856 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1857 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1858 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1859 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1860 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1861 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1862 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1863 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1864 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1865 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1866 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1867 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1868 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1869 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1870 kext=\377\270, kf1=\377\201, kf10=\377\212,
1871 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1872 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1873 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1874 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1875 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1876 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1877 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1878 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1879 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1880 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1881 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1882 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1883 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1884 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1885 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1886 khlp=\377\350, khome=\377\240, khts=\377\342,
1887 kich1=\377\253, kil1=\377\273, kind=\377\261,
1888 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1889 knp=\377\252, knxt=\377\312, kopn=\377\357,
1890 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1891 kprv=\377\302, krdo=\377\336, kref=\377\354,
1892 kres=\377\360, krfr=\377\347, kri=\377\271,
1893 krmir=\377\313, krpl=\377\362, krst=\377\352,
1894 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1895 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1896 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1897 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1898 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1902 qnxt|qnxt4|QNX4 terminal,
1905 qnxm|QNX4 with mouse events,
1907 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1908 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1909 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1910 smicm=\E/>2h, use=qnx4,
1915 # Monochrome QNX4 terminal or console. Setting this terminal type will
1916 # allow an application running on a color console to behave as if it
1917 # were a monochrome terminal. Output will be through stdout instead of
1918 # console writes because the term routines will recognize that the
1919 # terminal name starts with 'qnxt'.
1921 qnxtmono|Monochrome QNX4 terminal or console,
1925 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1926 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1927 # (TD: derive from original qnx4 entry)
1928 qnxt2|qnx 2.15 serial terminal,
1930 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1931 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1933 # QNX ANSI terminal definition
1936 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1937 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1938 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1939 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1940 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1941 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1942 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1943 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1944 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1945 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1946 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1947 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1948 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1949 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1950 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1951 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1952 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1953 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1954 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1955 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1956 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1957 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1958 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1959 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1960 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1961 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1962 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1963 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1964 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1965 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1966 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1967 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1968 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1969 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1970 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1971 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1972 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1973 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1974 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1975 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1976 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1977 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1978 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1979 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1980 smul=\E[4m, tbc=\E[3g,
1981 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1983 qansi|QNX ansi with console writes,
1984 daisy, xhpa, use=qansi-g,
1986 qansi-t|QNX ansi without console writes,
1989 qansi-m|QNX ansi with mouse,
1991 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1992 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1993 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1994 smicm=\E[>2h, use=qansi,
1996 qansi-w|QNX ansi for windows,
2001 # SCO console and SOS-Syscons console for 386bsd
2002 # (scoansi: had unknown capabilities
2003 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2004 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2005 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2006 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2007 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2008 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2009 # on the <smacs>=\E[12m -- esr)
2011 # klone+sgr-dumb is an error since the acsc does not match -TD
2013 # In this description based on SCO's keyboard(HW) manpage list of default
2014 # function key values:
2015 # F13-F24 are shifted F1-F12
2016 # F25-F36 are control F1-F12
2017 # F37-F48 are shift+control F1-F12
2019 # hpa/vpa work in the console, but not in scoterm:
2023 # SCO's terminfo uses
2026 # which do not work (console or scoterm).
2028 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2029 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2030 OTbs, am, bce, eo, xon,
2031 colors#8, cols#80, it#8, lines#25, pairs#64,
2032 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
2033 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2034 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2035 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2036 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2037 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2038 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2039 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2040 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2041 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2042 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2043 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2044 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2045 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2046 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2047 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2048 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2049 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2050 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2051 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2052 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2053 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2054 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2055 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2056 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2057 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2058 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2060 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2061 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2062 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2063 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
2064 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2065 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2066 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2067 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2068 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2070 # make this easy to change...
2071 scoansi|SCO Extended ANSI standard crt,
2076 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2077 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2078 # for the application keypad mode. We have added iris-ansi-ap rather than
2079 # change the original to keypad mode.
2081 # (iris-ansi: added rmam/smam based on init string -- esr)
2083 # This entry, and those derived from it, is used in xwsh (also known as
2084 # winterm). Some capabilities that do not fit into the terminfo model
2085 # include the shift- and control-functionkeys:
2087 # F1-F12 generate different codes when shift or control modifiers are used.
2091 # control-F1 \E[025q
2093 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2094 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2096 # The cursor keys also have different codes:
2097 # control-up \E[162q
2098 # control-down \E[165q
2099 # control-left \E[159q
2100 # control-right \E[168q
2103 # shift-down \E[164q
2104 # shift-left \E[158q
2105 # shift-right \E[167q
2107 # control-tab \[072q
2109 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2111 cols#80, it#8, lines#40,
2112 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2113 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2114 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2115 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2116 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2117 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2118 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2119 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2120 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2121 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2122 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2123 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2124 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2125 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2126 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2127 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2128 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2129 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2130 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2132 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2133 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2134 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2136 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2137 # (T.Dickey 98/1/24)
2138 iris-color|xwsh|IRIX ANSI with color,
2140 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2141 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2142 rmul=\E[24m, rs1=\Ec,
2143 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2144 sitm=\E[3m, use=vt100+enq, use=klone+color,
2147 #### OpenBSD consoles
2149 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2151 # The following terminal descriptions for the AMD/Intel PC console
2152 # were prepared based on information contained in the OpenBSD-4.9
2153 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2155 # Added bce based on testing with tack -TD
2156 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2157 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2159 pccon+keys|OpenBSD PC keyboard keys,
2160 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2161 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2162 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2163 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2164 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2166 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2167 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
2168 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
2169 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2170 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2171 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2172 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
2173 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2174 pccon+colors|ANSI colors for OpenBSD PC console,
2177 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2178 pccon+base|base capabilities for OpenBSD PC console,
2179 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2180 cols#80, it#8, lines#24,
2181 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
2182 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
2183 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2184 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2185 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2186 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
2187 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2188 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2189 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
2190 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2191 use=pccon0-m, use=pccon+colors,
2192 pccon-m|OpenBSD PC console without colors,
2193 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2194 pccon|OpenBSD PC console,
2195 use=pccon-m, use=pccon+colors,
2197 #### NetBSD consoles
2199 # pcvt termcap database entries (corresponding to release 3.31)
2200 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2202 # (For the terminfo master file, I translated these into terminfo syntax.
2203 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2204 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2205 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2207 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2208 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2209 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2210 pcvtXX|pcvt vt200 emulator (DEC VT220),
2211 am, km, mir, msgr, xenl,
2213 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
2214 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2215 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2216 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2217 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2218 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2219 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2220 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2221 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2222 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2223 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2224 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2225 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2226 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2227 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2228 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2229 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2230 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2231 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2232 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2234 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2235 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2236 # 50 lines entries; 80 columns
2237 pcvt25|dec vt220 emulation with 25 lines,
2239 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2240 pcvt28|dec vt220 emulation with 28 lines,
2242 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2243 pcvt35|dec vt220 emulation with 35 lines,
2245 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2246 pcvt40|dec vt220 emulation with 40 lines,
2248 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2249 pcvt43|dec vt220 emulation with 43 lines,
2251 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2252 pcvt50|dec vt220 emulation with 50 lines,
2254 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2256 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2257 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2258 # 50 lines entries; 132 columns
2259 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2261 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2262 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2264 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2265 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2267 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2268 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2270 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2271 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2273 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2274 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2276 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2278 # OpenBSD implements a color variation
2279 pcvt25-color|dec vt220 emulation with 25 lines and color,
2281 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2282 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2283 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2284 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2285 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2288 # Terminfo entries to enable the use of the ncurses library in colour on a
2289 # NetBSD-arm32 console (only tested on a RiscPC).
2290 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2291 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2292 # typo in invis - TD
2293 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2294 am, bce, msgr, xenl, xon,
2295 cols#80, it#8, lines#30,
2296 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2297 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2298 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2299 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2300 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2301 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2302 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2303 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2304 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2305 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2306 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2307 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2308 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2309 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2310 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2312 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2313 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2314 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2317 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2318 cols#132, lines#50, use=arm100,
2320 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2321 # manufactured by Sharp for the Japenese market.
2322 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2323 x68k|x68k-ite|NetBSD/x68k ITE,
2325 kclr=\E[9~, khlp=\E[28~, use=vt220,
2328 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2330 # (still unfinished, but good enough so far.)
2331 ofcons|DNARD OpenFirmware console,
2334 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2335 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2336 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2337 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2338 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2339 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2340 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2341 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2342 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2343 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2344 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2345 rmso=\2330m, rmul=\2330m,
2346 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
2347 sgr0=\2330m, smso=\2337m, smul=\2334m,
2349 # NetBSD "wscons" emulator in vt220 mode.
2350 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2351 # The emulator renders underlined text in red. Colors are otherwise usable.
2353 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2354 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2355 # vt220 screens in vttest do not work with this emulator. For instance, it
2356 # identifies itself (primary DA response) as a vt220 with selective erase. But
2357 # the selective erase feature does not work. The secondary response is copied
2358 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2359 # the level of detail in a termcap, it is a passable emulator, since ECH does
2360 # work. Don't use it on a VMS system -TD
2361 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2363 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2364 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2365 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2366 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2367 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2368 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2369 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2371 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2374 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2376 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2377 # Initial testing set TERM=xterm, based on comments by developers, found too
2378 # many differences to continue in that path. However, test-results may be
2379 # useful to people curious about compatibility with xterm.
2381 # Testing with tack:
2383 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2384 # There is color-bleeding in the color-pairs screen.
2385 # Attributes do not work with color
2387 # Failed: kf1-kf4, kf13-kf48, khome, kend
2388 # (effectively xterm-r6 for function-keys)
2389 # None of the function or cursor key-modifiers are encoded.
2390 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2392 # Testing with vttest:
2393 # -------------------
2394 # Identifies as vt220 with selective erase
2395 # (however, selective erase refers to DECSCA, SPA)
2396 # Does not implement vt52
2397 # Uses spaces to simulate double-size characters
2398 # Does not support 8-bit controls
2399 # Does not support VT220 reports
2400 # Does not support send/receive mode
2401 # Supports ECH (like rxvt)
2402 # Does not support DECSCA
2403 # Does not support any of the ISO-6429 cursor-movement
2404 # Does not support any of the ISO-6429 miscellaneous tests
2405 # (SL/SR also leave unexpected char on screen too)
2406 # Background does not change in menu 11.6.9 (SGR 22-27)
2407 # None of the xterm special features tests work
2408 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2409 kbs=\177, use=wsvt25,
2411 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2413 rcons|BSD rasterconsole,
2415 # Color version of above. Color currently only provided by NetBSD.
2416 rcons-color|BSD rasterconsole with ANSI color,
2419 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2421 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2422 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2423 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2424 # -- compare with cons25w
2426 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2427 colors#8, cols#80, it#8, lines#18, pairs#64,
2428 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2429 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2430 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2431 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2432 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2433 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2434 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2435 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2436 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2437 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2438 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2439 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2440 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2441 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2442 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2443 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2445 #### FreeBSD console entries
2447 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2448 # Andrey Chernov maintains the FreeBSD termcap distributions.
2450 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2451 # or comment out the :cb: capability in the console entry.
2453 # Alexander Lukyanov reports:
2454 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2455 # Now el1 clears not only to the line beginning, but also a large chunk
2456 # of previous line. But there is another bug - ech does not work at all.
2460 # common entry without semigraphics
2461 # Bug: The <op> capability resets attributes.
2462 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2463 # instance el1 does if the cursor is moved to the right margin first. Removed
2464 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2466 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2467 # Note that this disables standout with color.
2469 # The emulator sends difference strings based on shift- and control-keys,
2471 # F13-F24 are shifted F1-F12
2472 # F25-F36 are control F1-F12
2473 # F37-F48 are shift+control F1-F12
2474 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2475 am, bce, bw, eo, msgr, npc,
2476 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2477 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2478 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2479 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2480 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2481 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2482 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2483 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2484 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2485 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2486 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2487 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2488 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2489 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2490 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2491 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2492 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2493 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2494 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2495 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2496 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2497 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2498 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2499 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2500 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2501 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2502 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2503 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2505 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2506 kbs=\177, kdch1=\E[3~, use=cons25,
2507 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2509 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2510 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2511 smul=\E[4m, use=cons25,
2512 cons30|ansi80x30|freebsd console (30-line ansi mode),
2513 lines#30, use=cons25,
2514 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2515 lines#30, use=cons25-m,
2516 cons43|ansi80x43|freebsd console (43-line ansi mode),
2517 lines#43, use=cons25,
2518 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2519 lines#43, use=cons25-m,
2520 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2521 lines#50, use=cons25,
2522 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2523 lines#50, use=cons25-m,
2524 cons60|ansi80x60|freebsd console (60-line ansi mode),
2525 lines#60, use=cons25,
2526 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2527 lines#60, use=cons25-m,
2528 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2529 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2531 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2533 op@, rmul=\E[m, setab@, setaf@,
2534 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2535 smul=\E[4m, use=cons25r,
2536 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2537 lines#50, use=cons25r,
2538 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2539 lines#50, use=cons25r-m,
2540 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2541 lines#60, use=cons25r,
2542 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2543 lines#60, use=cons25r-m,
2544 # ISO 8859-1 FreeBSD console
2545 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2546 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2548 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2550 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2551 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2552 smul=\E[4m, use=cons25l1,
2553 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2554 lines#50, use=cons25l1,
2555 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2556 lines#50, use=cons25l1-m,
2557 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2558 lines#60, use=cons25l1,
2559 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2560 lines#60, use=cons25l1-m,
2562 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2563 # which is intended to be xterm-compatible. See for example
2564 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2565 # in particular scterm-teken.c
2567 # For FreeBSD 9 and 10:
2568 # --------------------
2569 # The /etc/ttys entries for console and other ttys are all configured to set
2572 # Testing with tack:
2573 # There is no VT100 line-drawing (uses +'s and -'s)
2574 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2576 # Testing with vttest:
2577 # Menu 2 diamonds don't work, blink ditto, light background ditto
2578 # The terminal identifies itself as VT100 with AVO
2579 # There is no VT52 support
2580 # There is no doublesize character support
2581 # The terminal supports ECH (like rxvt)
2582 # The terminal does not support send/receive mode
2583 # The terminal supports all of the ISO-6429 cursor-movement
2584 # The terminal supports some of the ISO-6429 miscellaneous tests
2585 # (SL/SR also leave unexpected char on screen too)
2587 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2588 # the cells which happen to have ASCII control-character values:
2589 # - ^X arrow pointing up
2590 # . ^Y arrow pointing down
2594 # Those are removed from this entry's acsc string to avoid confusion.
2595 # The resulting description provides correct line-drawing and function-keys -TD
2596 teken|syscons with teken,
2598 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2599 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2600 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2601 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2602 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2603 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2604 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2605 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2606 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2608 #### 386BSD and BSD/OS Consoles
2611 # This was the original 386BSD console entry (I think).
2612 # Some places it's named oldpc3|oldibmpc3.
2613 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2614 origpc3|origibmpc3|IBM PC 386BSD Console,
2615 OTbs, am, bw, eo, xon,
2617 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2618 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2619 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2620 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2621 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2622 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2623 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2625 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2626 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2629 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2630 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2631 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2632 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2634 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2635 # Note, the emulator supports many of the additional console features
2636 # listed in the iBCS2 (e.g. character-set selection) though not all
2637 # are described here. This entry really ought to be upgraded.
2638 # Also note, the console will also work with fewer lines after doing
2639 # "stty rows NN", e.g. to use 24 lines.
2640 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2641 # Bug: The <op> capability resets attributes.
2642 bsdos-pc|IBM PC BSD/OS Console,
2643 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2644 use=bsdos-pc-nobold,
2646 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2647 use=klone+color, use=bsdos-pc-m,
2649 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2650 OTbs, am, eo, km, xon,
2651 cols#80, it#8, lines#25,
2652 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2653 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2654 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2655 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2656 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2657 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2658 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2659 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2662 # Old names for BSD/OS PC console used in releases before 4.1.
2663 pc3|BSD/OS on the PC Console,
2664 use=bsdos-pc-nobold,
2665 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2668 # BSD/OS on the SPARC
2669 bsdos-sparc|Sun SPARC BSD/OS Console,
2672 # BSD/OS on the PowerPC
2673 bsdos-ppc|PowerPC BSD/OS Console,
2678 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2680 # Actually (TD pointed this out at the time the acsc string was added):
2681 # vt52 shouldn't define full acsc since most of the cells don't match.
2682 # see vt100 manual page A-31. This is the list that does match:
2691 # The line-drawing happens to work in several terminal emulators, but should
2692 # not be used as a guide to the capabilities of the vt52. Note in particular
2693 # that vt52 does not support line-drawing characters (the scan-X values refer
2694 # to a crude plotting feature) -TD
2697 cols#80, it#8, lines#24,
2698 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2699 cub1=\ED, cud1=\EB, cuf1=\EC,
2700 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2701 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2702 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2704 #### DEC VT100 and compatibles
2706 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2707 # and micro consoles can be found in the `obsolete' section. More details on
2708 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2709 # found near the end of this file.
2711 # Except where noted, these entries are DEC's official terminfos.
2712 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2713 # Engineering for more information. Updated terminfos and termcaps
2714 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2716 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2717 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2718 # its name to Boundless Technologies; see http://www.boundless.com.
2721 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2722 # certainly includes what DEC called the `Level 1 editing extension' codes;
2723 # only the very oldest VT100s lacked these and there probably aren't any of
2724 # those left alive. To capture these, use one of the VT102 entries.
2726 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2727 # since the cursor is left in a different position while in the
2728 # weird state (concept at beginning of next line, vt100 at end
2729 # of this line) so all versions of vi before 3.7 don't handle
2730 # <xenl> right on vt100. The correct way to handle <xenl> is when
2731 # you output the char in column 80, immediately output CR LF
2732 # and then assume you are in column 1 of the next line. If <xenl>
2733 # is on, am should be on too.
2735 # I assume you have smooth scroll off or are at a slow enough baud
2736 # rate that it doesn't matter (1200? or less). Also this assumes
2737 # that you set auto-nl to "on", if you set it off use vt100-nam
2740 # The padding requirements listed here are guesses. It is strongly
2741 # recommended that xon/xoff be enabled, as this is assumed here.
2743 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2744 # tab settings are in non-volatile memory and don't need to be
2745 # reset upon login. Also setting the number of columns glitches
2746 # the screen annoyingly. You can type "reset" to get them set.
2748 # The VT100 series terminals have cursor ("arrows") keys which can operate
2749 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2750 # is the reset state, and is assumed to be the normal state. Application
2751 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2752 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2753 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2754 # was provided primarily as an aid to the porting of VT52 applications. It is
2755 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2756 # applications such as vi will always transmit the <smkx> string. Therefore,
2757 # the definitions for the cursor keys are made to match what the terminal
2758 # transmits after the <smkx> string is transmitted. If the <smkx> string
2759 # is a null string or is not defined, then cursor keys are assumed to be in
2760 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2761 # else the application may fail. It is also expected that applications will
2762 # always transmit the <rmkx> string to the terminal before they exit.
2764 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2765 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2766 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2767 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2768 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2769 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2770 # Enter key transmits the same as the Return key (Note: the Return key
2771 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2772 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2773 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2774 # is normally in Numeric Mode. If an application requires that the keypad be
2775 # in Application Mode then it is expected that the user, or the application,
2776 # will set the TERM environment variable to point to a terminfo entry which has
2777 # defined the <smkx> string to include the codes that switch the keypad into
2778 # Application Mode, and the terminfo entry will also define function key
2779 # fields to match the Application Mode control codes. If the <smkx> string
2780 # is a null string or is not defined, then the keypad is assumed to be in
2781 # Numeric Mode. If the <smkx> string switches the keypad into Application
2782 # Mode, it is expected that the <rmkx> string will contain the control codes
2783 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2784 # applications which transmit the <smkx> string will also always transmit the
2785 # <rmkx> string to the terminal before they exit.
2787 # Here's a diagram of the VT100 keypad keys with their bindings.
2788 # The top line is the name of the key (some DEC keyboards have the keys
2789 # labelled somewhat differently, like GOLD instead of PF1, but this is
2790 # the most "official" name). The second line is the escape sequence it
2791 # generates in Application Keypad mode (where "$" means the ESC
2792 # character). The third line contains two items, first the mapping of
2793 # the key in terminfo, and then in termcap.
2794 # _______________________________________
2795 # | PF1 | PF2 | PF3 | PF4 |
2796 # | $OP | $OQ | $OR | $OS |
2797 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2799 # | $Ow | $Ox | $Oy | $Om |
2800 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2802 # | $Ot | $Ou | $Ov | $Ol |
2803 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2805 # | $Oq | $Or | $Os | enter |
2806 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2809 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2811 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2812 # terminfo guidelines. That is a compromise used to assign the remaining
2813 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2815 vt100+keypad|dec vt100 numeric keypad no fkeys,
2816 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2817 vt100+pfkeys|dec vt100 numeric keypad,
2818 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2820 vt100+fnkeys|dec vt100 numeric keypad,
2821 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2822 kf9=\EOw, use=vt100+pfkeys,
2824 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2825 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2826 # use the 5-key arrangement to model the arrow keys as suggested in the
2827 # terminfo guidelines:
2828 # _______________________________________
2829 # | PF1 | PF2 | PF3 | PF4 |
2830 # | $OP | $OQ | $OR | $OS |
2831 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2833 # | $Ow | $Ox | $Oy | $Om |
2834 # |_ka1__K1_|_________|_ka3__K3_|_________|
2836 # | $Ot | $Ou | $Ov | $Ol |
2837 # |_________|_kb2__K2_|_________|_________|
2839 # | $Oq | $Or | $Os | enter |
2840 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2843 # |___________________|_________|_kent_@8_|
2845 vt220+keypad|dec vt220 numeric keypad,
2846 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2847 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2850 vt100+enq|ncurses extension for vt100-style ENQ,
2851 u8=\E[?1;2c, use=ansi+enq,
2852 vt102+enq|ncurses extension for vt102-style ENQ,
2853 u8=\E[?6c, use=ansi+enq,
2855 # And here, for those of you with orphaned VT100s lacking documentation, is
2856 # a description of the soft switches invoked when you do `Set Up'.
2858 # Scroll 0-Jump Shifted 3 0-#
2859 # | 1-Smooth | 1-British pound sign
2860 # | Autorepeat 0-Off | Wrap Around 0-Off
2862 # | | Screen 0-Dark Bkg | | New Line 0-Off
2863 # | | | 1-Light Bkg | | | 1-On
2864 # | | | Cursor 0-Underline | | | Interlace 0-Off
2865 # | | | | 1-Block | | | | 1-On
2867 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2869 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2870 # | | | 1-On | | | 1-50 Hz
2871 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2872 # | | 1-ANSI | | 1-8 Bits
2873 # | Keyclick 0-Off | Parity 0-Off
2875 # Margin Bell 0-Off Parity Sense 0-Odd
2878 # The following SET-UP modes are assumed for normal operation:
2879 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2880 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2881 # Other SET-UP modes may be set for operator convenience or communication
2882 # requirements; I recommend
2883 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2884 # Unless you have a graphics add-on such as Digital Engineering's VT640
2885 # (and even then, whenever it can be arranged!) you should set
2888 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2889 vt100|vt100-am|dec vt100 (w/advanced video),
2890 OTbs, am, mc5i, msgr, xenl, xon,
2891 cols#80, it#8, lines#24, vt#3,
2892 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2893 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2894 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2895 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2896 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2897 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2898 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2899 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2900 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2901 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2902 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2903 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2904 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2905 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2906 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2907 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2909 vt100nam|vt100-nam|vt100 no automargins,
2910 am@, xenl@, use=vt100-am,
2911 vt100-vb|dec vt100 (w/advanced video) & no beep,
2912 bel@, flash=\E[?5h\E[?5l, use=vt100,
2914 # Ordinary vt100 in 132 column ("wide") mode.
2915 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2917 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2918 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2919 cols#132, lines#14, vt@,
2920 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2922 # vt100 with no advanced video.
2923 vt100-nav|vt100 without advanced video option,
2925 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2927 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2928 cols#132, lines#14, use=vt100-nav,
2930 # vt100 with one of the 24 lines used as a status line.
2931 # We put the status line on the top.
2932 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2935 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2936 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2937 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2938 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2940 # Status line at bottom.
2941 # Clearing the screen will clobber status line.
2942 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2945 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2946 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2948 # Most of the `vt100' emulators out there actually emulate a vt102
2949 # This entry (or vt102-nsgr) is probably the right thing to use for
2952 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2954 vt102-w|dec vt102 in wide mode,
2956 rs3=\E[?3h, use=vt102,
2958 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2959 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2960 # string in the canonical vt100 entry above leaves the screen littered
2961 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2962 # after highlight turnoffs. This entry should fix that, and even leave
2963 # ACS support working, at the cost of making multiple-highlight changes
2964 # slightly more expensive.
2965 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2966 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2967 sgr@, sgr0=\E[m, use=vt102,
2969 # VT125 Graphics CRT. Clear screen also erases graphics
2970 # Some vt125's came configured with vt102 support.
2971 vt125|vt125 graphics terminal,
2973 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2975 # This isn't a DEC entry, it came from University of Wisconsin.
2976 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2979 cols#80, it#8, lines#24, vt#3,
2980 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2981 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2982 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2983 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2984 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2985 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2986 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2987 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2988 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2990 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2991 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2992 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2994 # vt132 - like vt100 but slower and has ins/del line and such.
2995 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2996 # manual and from the ANSI standard, this describes the actual
2997 # terminal. I've never actually used a vt132 myself, so this
3002 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3003 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3005 # This vt220 description maps F5--F9 to the second block of function keys
3006 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3007 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3008 # PF1--PF4 are used as F1--F4.
3011 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3012 OTbs, OTpt, am, mir, msgr, xenl, xon,
3013 cols#80, lines#24, vt#3,
3015 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3016 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3017 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3018 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3019 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3020 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3021 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3022 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3023 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3024 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3025 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3026 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3027 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3028 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3029 rmso=\E[27m, rmul=\E[24m,
3030 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3031 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3032 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3033 smso=\E[7m, smul=\E[4m,
3035 # A much better description of the VT200/220; used to be vt220-8
3036 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3037 # designation to accommodate bug in pcvt -TD
3039 # Here's a picture of the VT220 editing keypad:
3040 # +--------+--------+--------+
3041 # | Find | Insert | Remove |
3042 # +--------+--------+--------+
3043 # | Select | Prev | Next |
3044 # +--------+--------+--------+
3045 vt220|vt200|dec vt220,
3046 OTbs, am, mir, msgr, xenl, xon,
3047 cols#80, it#8, lines#24, vt#3,
3048 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3049 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3050 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3051 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3052 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3053 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3054 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3055 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3056 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3057 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3058 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3059 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3060 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3061 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3062 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3063 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3064 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3065 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3066 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3067 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3069 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3070 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3071 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3073 vt220-w|vt200-w|DEC vt220 in wide mode,
3075 rs3=\E[?3h, use=vt220,
3076 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3077 OTbs, am, mc5i, mir, msgr, xenl, xon,
3078 cols#80, it#8, lines#24, vt#3,
3079 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3080 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3081 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3082 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3083 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3084 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3085 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3086 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3087 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3088 il=\233%p1%dL, il1=\233L, ind=\ED,
3089 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3090 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3091 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3092 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3093 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3094 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3095 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3096 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3097 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3098 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3099 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3100 rmul=\23324m, rs1=\233?3l, sc=\E7,
3101 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3102 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3103 smso=\2337m, smul=\2334m, tbc=\2333g,
3106 # This vt220 description regards F6--F10 as the second block of function keys
3107 # at the top of the keyboard. This mapping follows the description given
3108 # in the VT220 Programmer Reference Manual and agrees with the labeling
3109 # on some terminals that emulate the vt220. There is no support for an F5.
3110 # See vt220 for an alternate mapping.
3112 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3113 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3114 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3115 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3116 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3118 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3120 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3122 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3123 # (not an official DEC entry!)
3124 # The problem with real vt220 terminals is they don't send escapes when in
3125 # in vt220 mode. This can be gotten around two ways. 1> don't send
3126 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3127 # features of vt100 advanced video which it then has.
3129 # This entry takes the view of putting a vt220 into vt100 mode so
3130 # you can use the escape key in emacs and everything else which needs it.
3132 # You probably don't want to use this on a VMS machine since VMS will think
3133 # it has a vt220 and will get fouled up coming out of emacs
3135 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3136 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3138 vt200-js|vt220-js|dec vt200 series with jump scroll,
3141 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3142 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3143 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3144 ht=^I, il1=\E[L, ind=\ED,
3145 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
3146 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3147 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3148 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3149 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3150 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3151 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3153 # This was DEC's vt320. Use the purpose-built one below instead
3154 #vt320|DEC VT320 in vt100 emulation mode,
3157 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3159 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3161 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3163 # These entries are not DEC's official ones, they were purpose-built for the
3164 # VT320. Here are the designer's notes:
3165 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3166 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3167 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3168 # Things that use <knxt> usually use tab anyways... and things that don't use
3169 # tab usually use <knxt> instead...
3170 # kprv is same as tab - Backtab is useless...
3171 # I left out <sgr> because of its RIDICULOUS complexity,
3172 # and the resulting fact that it causes the termcap translation of the entry
3173 # to SMASH the 1k-barrier...
3174 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3175 # (vt320: uncommented <fsl> --esr)
3176 vt320|vt300|dec vt320 7 bit terminal,
3177 am, hs, mir, msgr, xenl,
3178 cols#80, lines#24, wsl#80,
3179 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3180 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3181 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3182 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3183 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3184 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3185 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3186 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3187 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3188 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3189 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3190 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3191 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3192 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3193 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3194 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3195 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3196 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3197 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3199 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3201 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3202 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3203 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3204 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3205 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3207 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3208 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3210 # We have to init 132-col mode, not 80-col mode.
3211 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3213 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3214 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3216 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3218 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3219 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3222 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3223 # which are pretty much a superset of the VT320. They have the
3224 # host writable status line, yet another different DRCS matrix size,
3225 # and such, but they add the DEC Technical character set, Multiple text
3226 # pages, selectable length pages, and the like. The difference between
3227 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3228 # monitor, the former has 4 planes and a color monitor. These terminals
3229 # support VT131 and ANSI block mode, but as with much of these things,
3230 # termcap/terminfo doesn't deal with these features.
3232 # Note that this entry is are set up in what was the standard way for GNU
3233 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3234 # keys were switched into application mode at the same time the numeric pad
3235 # is switched into application mode. This changes the definitions of the
3236 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3237 # your termcap or terminfo entry,
3239 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3240 # (vt340: string capability "sb=\E[M" corrected to "sr";
3241 # also, added <rmam>/<smam> based on the init string -- esr)
3242 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3243 am, eslok, hs, mir, msgr, xenl, xon,
3244 cols#80, it#8, lines#24, vt#3,
3245 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3246 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3247 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3248 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3249 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3250 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3251 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3252 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3253 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3255 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3256 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3257 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3258 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3259 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3260 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3261 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3262 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3263 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3264 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3265 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3266 tsl=\E[2$~\E[1$}\E[1;%dH,
3268 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3269 # (originally written with vt420 as its primary name, and usable for it).
3271 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3272 # text pages and long text pages with selectable length of the vt340, along
3273 # with left and right margins, rectangular area text copy, fill, and erase
3274 # operations, selected region character attribute change operations,
3275 # page memory and rectangle checksums, insert/delete column, reception
3276 # macros, and other features too numerous to remember right now. TERMCAP
3277 # can only take advantage of a few of these added features.
3279 # Note that this entry is are set up in what was the standard way for GNU
3280 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3281 # keys were switched into application mode at the same time the numeric pad
3282 # is switched into application mode. This changes the definitions of the
3283 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3284 # your termcap entry,
3286 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3287 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3288 # also, added <rmam>/<smam> based on the init string -- esr)
3289 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3290 am, eslok, hs, mir, msgr, xenl, xon,
3291 cols#80, it#8, lines#24, vt#3,
3292 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3293 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3294 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3295 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3296 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3297 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3298 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3299 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3300 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3301 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3302 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3303 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3304 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3305 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3306 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3307 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3308 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3309 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3310 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3311 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3312 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3313 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3314 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3316 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3317 # a missing <sc> -- esr)
3318 # add msgr and other capabilities from vt220 -TD
3320 am, mir, msgr, xenl, xon,
3321 cols#80, it#8, lines#24, vt#3,
3322 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3323 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3324 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3325 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3326 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3327 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3328 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3329 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3330 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3331 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3332 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3333 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3334 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3335 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3336 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3337 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3338 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3339 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3340 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3341 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3342 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3343 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3344 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3345 use=ansi+pp, use=dec+sl, use=ansi+enq,
3347 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3348 # takes two parameters, the key and the string. Translating the key is
3349 # straightforward (keys 1-5 are not defined on real terminals, though some
3350 # emulators define these):
3352 # if (key < 16) then value = key;
3353 # else if (key < 21) then value = key + 1;
3354 # else if (key < 25) then value = key + 2;
3355 # else if (key < 27) then value = key + 3;
3356 # else if (key < 30) then value = key + 4;
3357 # else value = key + 5;
3359 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3360 # There's no provision in terminfo for emitting a string in this format, so the
3361 # application has to know it.
3363 vt420pc|DEC VT420 w/PC keyboard,
3364 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
3365 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
3366 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
3367 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
3368 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3369 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
3370 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
3371 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
3372 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
3373 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
3374 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
3375 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
3376 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3377 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3378 pctrm=USR_TERM\:vt420pcdos\:,
3379 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
3382 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3384 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
3386 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3387 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3389 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3390 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3391 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3392 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3393 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3394 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3395 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3400 vt510pc|DEC VT510 w/PC keyboard,
3402 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3407 # The VT520 is a monochrome text terminal capable of managing up to
3408 # four independent sessions in the terminal. It has multiple ANSI
3409 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3410 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3411 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3413 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3414 # [Alt]/[Print Screen] depending upon which keyboard and which
3415 # terminal mode is being used. If Set-Up has been disabled or
3416 # assigned to an unknown key, Set-Up may be entered by pressing
3417 # [F3] as the first key after power up, regardless of keyboard type.
3419 use=ansi+rca, use=vt420, use=ansi+tabs,
3424 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3425 # Keyboard, which replaces the old LK41R-AA keyboard.
3427 # In trying to get the function keys to work, I had to cobble my own
3428 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3429 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3430 # I seem to get them all -Mike Gran
3431 vt520ansi|Boundless VT520 ANSI,
3432 use=ansi+rca, use=vt420f, use=vt220+keypad,
3435 #### VT100 emulations
3438 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3439 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3440 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3441 # that this works best with a stock vt100 entry.
3442 dec-vt100|EWAN telnet's vt100 emulation,
3445 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3446 dec-vt220|DOS tnvt200 terminal emulator,
3449 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3450 # anyone who needs PC VT340 emulation. (or anything below that level, for
3451 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3452 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3453 # I can send the address if requested.
3454 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3455 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3456 z340|zstem vt340 terminal emulator 132col 42line,
3458 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3459 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3461 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3463 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3464 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3467 # CRT is shareware. It implements some xterm features, including mouse.
3468 crt|crt-vt220|CRT 2.3 emulating VT220,
3471 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3473 # PuTTY 0.55 (released 3 August 2004)
3474 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3476 # Comparing with 0.51, vttest is much better (only a few problems with the
3477 # cursor position reports and wrapping).
3479 # PuTTY 0.51 (released 14 December 2000)
3481 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3482 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3483 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3484 # to xterm, which is incorrect, since several features are misimplemented:
3486 # Alt+key always sends ESC+key, so 'km' capability is removed.
3488 # Control responses, wrapping and tabs are buggy, failing a couple of
3489 # screens in vttest.
3491 # xterm mouse support is not implemented (unrelease version may).
3493 # Several features such as backspace/delete are optional; this entry documents
3494 # the default behavior -TD
3496 putty|PuTTY terminal emulator,
3497 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3498 colors#8, it#8, ncv#22, pairs#64, U8#1,
3499 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3500 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3501 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3502 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3503 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3504 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3505 dch=\E[%p1%dP, dch1=\E[P,
3506 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
3507 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3508 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
3509 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3510 ind=^J, indn=\E[%p1%dS,
3511 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
3512 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3513 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
3514 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
3515 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3516 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3517 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3518 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3519 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3520 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3521 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3522 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3523 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
3524 rmso=\E[27m, rmul=\E[24m,
3525 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3526 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3527 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3528 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3529 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3530 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
3531 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq,
3533 vt100-putty|Reset PuTTY to pure vt100,
3534 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3536 # palette is hardcoded...
3537 putty-256color|PuTTY 0.58 with xterm 256-colors,
3538 use=xterm+256setaf, use=putty,
3540 # One of the keyboard selections is "VT100+".
3541 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3542 putty-vt100|VT100+ keyboard layout,
3543 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3544 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3545 kf9=\EOX, use=putty,
3547 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3549 # Use modifiers to obtain function keys past 12:
3552 # F25-F36 - control/alt
3553 # F37-F48 - control/shift
3555 putty-sco|putty with SCO function keys,
3556 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3557 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3558 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3559 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3560 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3561 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3562 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3563 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3564 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3565 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3566 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3567 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3569 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3570 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3571 # (communication program) which supports:
3573 # - Serial port connections.
3574 # - TCP/IP (telnet) connections.
3575 # - VT100 emulation, and selected VT200/300 emulation.
3576 # - TEK4010 emulation.
3577 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3579 # - Scripts using the "Tera Term Language".
3580 # - Japanese and Russian character sets.
3582 # The program does not come with terminfo or termcap entries. However, the
3583 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3584 # vt52 or doublesize character support; blinking is done with color). Besides
3585 # the HPA, VPA extensions it also implements CPL and CNL.
3587 # All of the function keys can be remapped. This description shows the default
3588 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3589 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3590 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3598 # ANSI colors are implemented, but cannot be combined with video attributes
3599 # except for reverse.
3601 # No fonts are supplied with the program, so the acsc string is chosen to
3602 # correspond with the default Microsoft terminal font.
3604 # Tera Term recognizes some xterm sequences, including those for setting and
3605 # retrieving the window title, and for setting the window size (i.e., using
3606 # "resize -s"), though it does not pass SIGWINCH to the application if the
3607 # user resizes the window with the mouse.
3608 teraterm2.3|Tera Term Pro,
3611 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3612 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3613 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3614 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3615 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3616 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3617 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3618 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3619 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3620 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3621 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3622 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3623 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3624 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3625 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3626 use=klone+color, use=vt100,
3628 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3629 # to choose a Windows OEM font).
3631 # Testing with tack:
3632 # - it does not have xenl (suppress that)
3633 # - underline seems to work with color (modify ncv).
3634 # Testing with vttest:
3635 # - wrapping differs from vt100 (menu 1).
3636 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3638 # - it recognizes the dtterm window controls for reporting size in
3639 # characters and pixels.
3640 # - it passes SIGWINCH.
3641 teraterm4.59|Tera Term Pro,
3644 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3645 kmous=\E[M, use=teraterm2.3,
3650 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3651 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3654 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3655 # for casual (occasional) use. Also fails several of the vttest screens,
3656 # but that is not unusual for vt100 "emulators".
3657 # b) Does not implement vt100 keypad
3658 # c) Recognizes a subset of vt52 controls.
3659 ms-vt100|MS telnet imitating dec vt100,
3661 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3662 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3663 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3665 # Tested with Windows 2000, the telnet application runs in a console window,
3666 # also using 'Terminal' font.
3669 # a) This version has no function keys or numeric keypad. Unlike the older
3670 # version, the numeric keypad is entirely ignored.
3671 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3672 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3674 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3677 # Based on comments from Federico Bianchi:
3679 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3680 # scheme for PF keys.
3682 # and PuTTY wishlist:
3684 # The modifiers are represented as the codes listed above, prefixed to
3685 # the normal sequences. If the modifier is pressed alone, its sequence
3686 # is transmitted twice in succession. If multiple modifiers apply,
3687 # they're transmitted in the order shift, control, alt.
3692 ms-vt100+|vt100+|windows XP vt100+ (sic),
3693 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3694 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3695 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3696 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3697 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3698 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3699 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3700 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3701 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3702 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3703 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3704 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3705 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3706 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3707 knp=\E/, kpp=\E?, use=ms-vt100-color,
3709 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3712 # expect-5.44.1.15/example/tkterm
3713 # a minimal subset of a vt100 (compare with "news-unk).
3715 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3716 tt|tkterm|Don Libes' tk text widget terminal emulator,
3717 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3718 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3719 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3720 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3723 ######## X TERMINAL EMULATORS
3726 # You can add the following line to your .Xdefaults to change the terminal type
3727 # set by the xterms you start up to my-xterm:
3729 # *termName: my-xterm
3731 # System administrators can change the default entry for xterm instances
3732 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3733 # case, xterm will detect and reject an invalid terminal type, falling back
3734 # to the default of xterm.
3737 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3738 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3739 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3740 # as these seem not to work -- esr)
3741 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3742 OTbs, am, km, mir, msgr, xenl, xon,
3743 cols#80, it#8, lines#65,
3744 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3745 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3746 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3747 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3748 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3749 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3750 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3751 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3752 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3753 smso=\E[7m, smul=\E[4m,
3754 # Compatible with the R5 xterm
3755 # (from the XFree86 3.2 distribution, <blink=@> removed)
3756 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3757 # corrected typos in rs2 string - TD
3759 xterm-r5|xterm R5 version,
3760 OTbs, am, km, msgr, xenl,
3761 cols#80, it#8, lines#24,
3762 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3763 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3764 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3765 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3766 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3767 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3768 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3769 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3770 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3771 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3772 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3773 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3774 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3775 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3777 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3779 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3780 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3781 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3782 # Compatible with the R6 xterm
3783 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3784 # added khome/kend, hts based on the R6 xterm code - TD
3785 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3786 # for compatibility with other emulators).
3787 xterm-r6|xterm X11R6 version,
3788 OTbs, am, km, mir, msgr, xenl,
3789 cols#80, it#8, lines#24,
3790 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3791 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3792 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3793 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3794 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3795 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3796 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3798 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3799 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3800 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3801 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3802 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3803 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3804 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3805 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3806 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3807 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3808 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3809 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3810 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3811 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3813 xterm-old|antique xterm version,
3815 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3816 # The name has been changed and some aliases have been removed.
3817 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3818 OTbs, am, bce, km, mir, msgr, xenl, XT,
3819 cols#80, it#8, lines#24, ncv@,
3820 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3821 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3822 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3823 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3824 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3825 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3826 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3827 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3828 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3829 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3831 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3832 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3833 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3834 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3835 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3836 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3837 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3838 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3839 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3840 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3841 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3842 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3843 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3844 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3845 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3846 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3847 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3848 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3849 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3850 use=ecma+color, use=vt220+keypad,
3852 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3853 # codes for F1-F4 except while in VT220 mode.
3854 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3855 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3857 # This version was released in XFree86 3.3.3 (November 1998).
3858 # Besides providing printer support, it exploits a new feature that allows
3859 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3860 # -- the distribution contained incorrect khome/kend values -TD
3861 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3862 blink=\E[5m, ich1@, invis=\E[8m,
3863 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3864 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3865 rs2=\E[!p\E[?3;4l\E[4l\E>,
3866 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3867 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3870 # This version was released in XFree86 4.0.
3871 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3873 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3874 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3875 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3876 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3877 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3878 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3879 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3880 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3881 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3882 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3883 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3884 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3885 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3886 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3887 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3888 smcup=\E[?1049h, use=xterm-xf86-v333,
3890 # This version was released in XFree86 4.3.
3891 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3892 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3893 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3895 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3898 # This version was released in XFree86 4.4.
3899 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3900 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3901 rin=\E[%p1%dT, use=xterm-xf86-v43,
3903 xterm-xfree86|xterm terminal emulator (XFree86),
3906 # This version reflects the current xterm features.
3907 xterm-new|modern xterm terminal emulator,
3909 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3910 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3913 # This fragment is for people who cannot agree on what the backspace key
3915 xterm+kbs|fragment for backspace key,
3918 # This fragment describes as much of XFree86 xterm's "pc-style" function
3919 # keys as will fit into terminfo's 60 function keys.
3922 # ---------------------------------
3929 # 8 Shift + Alt + Control
3930 # ---------------------------------
3931 # The meta key may also be used as a modifier in this scheme, adding another
3932 # bit to the parameter.
3933 xterm+pcfkeys|fragment for PC-style fkeys,
3934 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3937 xterm+noapp|fragment with cursor keys in normal mode,
3938 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3941 xterm+app|fragment with cursor keys in application mode,
3942 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3945 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3946 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3947 # the earlier scheme, as noted in the "use=" clauses in this file.
3949 # The original assignments from patch #94 for cursor-keys had some technical
3952 # A parameter for a function-key to represent a modifier is just more
3953 # bits. But for a cursor-key it may change the behavior of the
3954 # application. For instance, emacs decodes the first parameter of a
3955 # cursor-key as a repeat count.
3957 # A parameterized string should (really) not begin with SS3 (\EO).
3958 # Rather, CSI (\E[) should be used.
3960 # For these reasons, the original assignments were deprecated. For
3961 # compatibility reasons, they are still available as a setting of xterm's
3962 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3963 # that might apply to xterm+pcfkeys with different values of that resource.
3964 xterm+pcc3|fragment with modifyCursorKeys:3,
3965 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3966 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3967 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3968 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3969 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3970 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3971 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3972 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3975 xterm+pcc2|fragment with modifyCursorKeys:2,
3976 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3977 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3978 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3979 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3980 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3981 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3982 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3984 xterm+pcc1|fragment with modifyCursorKeys:1,
3985 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3986 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3987 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3988 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3989 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3990 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3992 xterm+pcc0|fragment with modifyCursorKeys:0,
3993 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3994 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3995 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3996 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3997 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3998 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4001 # Here are corresponding fragments from xterm patch #216:
4003 xterm+pcf0|fragment with modifyFunctionKeys:0,
4004 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4005 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4006 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4007 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4008 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4009 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4010 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4011 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4012 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4013 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4014 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4015 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4016 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4017 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4018 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4019 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4020 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4022 xterm+pcf2|fragment with modifyFunctionKeys:2,
4023 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4024 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4025 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4026 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4027 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4028 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4029 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4030 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4031 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4032 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4033 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4034 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4035 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4036 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4037 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4038 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4039 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4040 kf8=\E[19~, kf9=\E[20~,
4042 # Chunks from xterm #230:
4043 xterm+pce2|fragment with modifyCursorKeys:2,
4044 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4045 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4046 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4047 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4048 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4049 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4050 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4051 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4052 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4053 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4054 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4057 xterm+edit|fragment for 6-key editing-keypad,
4058 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4061 xterm+pc+edit|fragment for pc-style editing keypad,
4062 kend=\E[4~, khome=\E[1~,
4064 xterm+vt+edit|fragment for vt220-style editing keypad,
4065 kfnd=\E[1~, kslt=\E[4~,
4068 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4069 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4070 # is shown here (because that is used in mrxvt and mlterm):
4071 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4072 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4073 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4074 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4075 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4076 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4077 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4078 kf63=\E[13;4~, use=xterm+pcf2,
4080 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4081 xterm-basic|modern xterm terminal emulator - common,
4082 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4083 colors#8, cols#80, it#8, lines#24, pairs#64,
4084 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4085 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4086 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
4087 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4088 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4089 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4090 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4091 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4092 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4093 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4094 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
4095 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4096 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4097 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4098 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4099 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4100 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4101 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4102 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4103 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4104 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4105 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4106 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4107 vpa=\E[%i%p1%dd, E3=\E[3;J, use=ansi+pp, use=xterm+kbs,
4110 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4111 # In retrospect, something like xterm-r6 was intended here -TD
4112 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4113 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4115 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
4116 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4117 # xterm also recognizes the control sequences for initc -TD
4118 xterm-16color|xterm with 16 colors like aixterm,
4120 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4121 use=ibm+16color, use=xterm-new,
4123 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4124 # patch #111 (1999/7/10) -TD
4125 xterm+256color|xterm 256-color feature,
4127 colors#256, pairs#32767,
4128 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4129 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4130 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4133 xterm+256setaf|xterm 256-color (set-only),
4135 colors#256, pairs#32767,
4137 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4138 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4141 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4142 # patch #115 (1999/9/18) -TD
4144 # Note that the escape sequences used are the same as for 256-colors - xterm
4145 # has a different table of default color resource values. If built for
4146 # 256-colors, it can still handle an 88-color palette by using the initc
4149 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4150 # which support the xterm+256color feature support the associated initc
4151 # capability. So it is cancelled in the entries which use this and/or the
4152 # xterm+256color block.
4154 # The default color palette for the 256- and 88-colors are different. A
4155 # given executable will have one palette (perhaps compiled-in). If the program
4156 # supports xterm's control sequence, it can be programmed using initc.
4157 xterm+88color|xterm 88-color feature,
4158 colors#88, pairs#7744, use=xterm+256color,
4160 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4161 xterm-256color|xterm with 256 colors,
4162 use=xterm+256color, use=xterm-new,
4163 xterm-88color|xterm with 88 colors,
4164 use=xterm+88color, use=xterm-256color,
4166 # These two are used to demonstrate the any-event mouse support, i.e., by
4167 # using an extended name "XM" which tells ncurses to put the terminal into
4168 # a special mode when initializing the xterm mouse.
4169 xterm+sm+1002|testing xterm-mouse,
4170 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
4171 xterm+sm+1003|testing xterm-mouse,
4172 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
4174 xterm-1002|testing xterm-mouse,
4175 use=xterm+sm+1002, use=xterm-new,
4176 xterm-1003|testing xterm-mouse,
4177 use=xterm+sm+1003, use=xterm-new,
4179 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4180 # asked for some of xterm's advanced features to be added to its terminfo
4181 # entry. It defines extended capabilities not found in standard terminfo or
4182 # termcap. These are useful in tmux, for instance, hence the name.
4184 # One caveat in adding extended capabilities in ncurses is that if the names
4185 # are longer than two characters, then they will not be visible through the
4186 # termcap interface.
4188 # Ms modifies the selection/clipboard. Its parameters are
4189 # p1 = the storage unit (clipboard, selection or cut buffer)
4190 # p2 = the base64-encoded clipboard content.
4192 # Ss is used to set the cursor style as described by the DECSCUSR
4193 # function to a block or underline.
4194 # Se resets the cursor style to the terminal power-on default.
4196 # Cs and Cr set and reset the cursor colour.
4197 xterm+tmux|advanced xterm features used in tmux,
4198 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4199 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4201 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4202 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4203 # To use it, your decTerminalID resource must be set to 200 or above.
4210 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4211 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4212 colors#8, cols#80, it#8, lines#24, pairs#64,
4213 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4214 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4215 civis=\233?25l, clear=\233H\2332J,
4216 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
4217 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
4218 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4219 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4220 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4221 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4222 flash=\233?5h$<100/>\233?5l, home=\233H,
4223 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4224 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
4225 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4226 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4227 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4228 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4229 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4230 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4231 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4232 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4233 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4234 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4235 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4236 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4237 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4238 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4240 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4241 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4242 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4243 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4244 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4245 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4246 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4247 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4248 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4251 xterm-hp|xterm with hpterm function keys,
4252 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4253 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4254 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4255 knp=\ES, kpp=\ET, use=xterm-basic,
4257 xterm-sco|xterm with SCO function keys,
4258 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4259 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4260 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4261 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4262 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4263 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4264 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4265 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4266 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4267 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4268 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4269 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4272 # The xterm-new description has all of the features, but is not completely
4273 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4274 # sunKeyboard resource to true:
4275 # + maps the editing keypad
4276 # + interprets control-function-key as a second array of keys, so a
4277 # 12-fkey keyboard can support vt220's 20-fkeys.
4278 # + maps numeric keypad "+" to ",".
4279 # + uses DEC-style control sequences for the application keypad.
4281 xterm-vt220|xterm emulating vt220,
4282 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4283 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4284 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4285 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4286 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4287 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4288 use=xterm+app, use=xterm+edit, use=xterm-basic,
4291 xterm-vt52|xterm emulating dec vt52,
4292 cols#80, it#8, lines#24,
4293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4294 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
4295 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4296 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4297 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
4300 xterm-noapp|xterm with cursor keys in normal mode,
4301 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4304 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4305 lines#24, use=xterm-old,
4307 # This is xterm for ncurses.
4308 xterm|xterm terminal emulator (X Window System),
4311 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4312 # setting the vt100Graphics resource to false.
4313 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4316 # These building-blocks allow access to the X titlebar and icon name as a
4317 # status line. There are a few problems in using them in entries:
4319 # a) tsl should have a parameter to denote the column on which to transfer to
4321 # b) the "0" code for xterm updates both icon-title and window title. Some
4322 # window managers such as twm (and possibly window managers descended from
4323 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4324 # don't want to mess with icon-name when using those window managers.
4326 # The extension "TS" is preferable, because it does not accept a parameter.
4327 # However, if you are using a non-extended terminfo, "TS" is not visible.
4328 xterm+sl|access X title line and icon name,
4330 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4331 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4333 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4335 # In contrast, this block can be used for a DEC vt320 and up. There are two
4338 # DECSASD (select active status display)
4339 # \E[0$} Main display
4340 # \E[1$} Status line
4342 # DECSSDT (select status line type)
4343 # \E[0$~ No status line
4344 # \E[1$~ Indicator status line
4345 # \E[2$~ Host-writable status line
4347 # The building block assumes that the terminal always shows something at the
4348 # status line (either the indicator, or status line). That is because if no
4349 # status line is used, then the terminal makes that line part of the user
4350 # window, changing its size without notice.
4352 # Because there is no "esl" (enable status line) capability, the "tsl"
4353 # capability ensures that the status line is host-writable. A DEC terminal
4354 # will clear the status line when changing from indicator to host-writable
4357 # Once on the status line, the row part of cursor addressing is ignored. Since
4358 # tsl expects a parameter (to specify the column), the shortest addressing that
4359 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4361 dec+sl|DEC VTxx status line,
4363 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4366 # The following xterm variants don't depend on your base version
4368 # xterm with bold instead of underline
4369 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4370 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
4371 smso=\E[7m, smul=\E[1m, use=xterm-old,
4373 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4374 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4375 ich@, ich1@, use=xterm,
4376 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4377 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4378 rmcup@, smcup@, use=xterm,
4381 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4382 # (kterm should not invoke DEC Graphics as the alternate character set
4383 # -- Kenji Rikitake)
4384 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4385 # -- MATSUMOTO Shoji)
4386 # kterm implements acsc via built-in table of X Drawable's
4387 kterm|kterm kanji terminal emulator (X window system),
4390 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4391 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4392 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4393 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4394 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4395 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4396 kterm-color|kterm-co|kterm with ANSI colors,
4397 ncv@, use=kterm, use=ecma+color,
4400 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4401 # variant of xterm which is apparently no longer supported, but are interesting
4402 # because they illustrate SVr4 curses mouse controls - T.Dickey
4403 xtermm|xterm terminal emulator (monocrome),
4404 OTbs, am, km, mir, msgr, xenl,
4405 btns#3, cols#80, it#8, lines#24,
4406 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4407 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4408 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4409 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4410 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4411 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4412 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4413 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4414 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4415 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4416 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4417 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4418 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4419 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4420 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4421 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4422 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4423 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4424 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4426 xtermc|xterm terminal emulator (color),
4427 colors#8, ncv#7, pairs#64,
4428 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4429 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4430 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4433 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4434 # Here's a termcap entry I've been using for xterm_color, which comes
4435 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4436 # color stuff, I also have a status line defined as the window manager
4437 # title bar. [I have translated it to terminfo -- ESR]
4438 xterm-pcolor|xterm with color used for highlights and status line,
4440 bold=\E[1;43m, rev=\E[7;34m,
4441 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
4442 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4444 # This describes the capabilities of color_xterm, an xterm variant from
4445 # before ECMA-64 color support was folded into the main-line xterm release.
4446 # This entry is straight from color_xterm's maintainer.
4447 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4448 # The README's with the distribution also say that it supports SGR 21, 24, 25
4449 # and 27, but they are not present in the terminfo or termcap.
4450 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4451 OTbs, am, km, mir, msgr, xenl, XT,
4452 cols#80, it#8, lines#65, ncv@,
4453 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4454 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4455 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4456 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4457 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4458 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4459 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4460 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4461 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4462 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4463 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4464 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4465 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4466 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4467 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4468 rmso=\E[27m, rmul=\E[24m,
4469 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4471 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4472 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4473 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4474 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4476 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4477 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4478 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4479 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4480 # that each of those implements the home, end, delete keys differently.
4482 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4483 # colors; note that this is not compatible with the 5.2 version.
4484 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4485 # match XFree86's xterm.terminfo usage and prevent circular links
4486 xterm-color|nxterm|generic color xterm,
4488 op=\E[m, use=xterm-r6, use=klone+color,
4490 # This entry describes an xterm with Sun-style function keys enabled
4491 # via the X resource setting "xterm*sunFunctionKeys:true"
4492 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4493 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4494 # because we want it to be seen as <kcpy>.
4495 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4496 # with their Sun keyboard labels instead.
4497 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4498 xterm-sun|xterm with sunFunctionKeys true,
4499 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4500 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4501 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4502 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4503 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4504 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4505 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4506 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4507 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4508 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4509 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4510 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4512 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4513 cols#80, lines#24, use=xterm-sun,
4516 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4517 gnome-rh62|Gnome terminal,
4519 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4522 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4524 # This implements a subset of vt102 with a random selection of features from
4525 # other terminals such as color and function-keys.
4527 # shift-f1 to shift-f10 are f11 to f20
4529 # NumLock changes the application keypad to approximate vt100 keypad, except
4530 # that there is no escape sequence matching comma (,).
4532 # Other defects observed:
4533 # vt100 LNM mode is not implemented.
4534 # vt100 80/132 column mode is not implemented.
4535 # vt100 DECALN is not implemented.
4536 # vt100 DECSCNM mode is not implemented, so flash does not work.
4537 # vt100 TBC (tab reset) is not implemented.
4538 # xterm alternate screen controls do not restore cursor position properly
4539 # it hangs in tack after running function-keys test.
4540 gnome-rh72|GNOME Terminal,
4542 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4543 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4544 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
4545 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4547 # GNOME Terminal 2.0.1 (Redhat 8.0)
4549 # Documentation now claims it implements vt220 (which is demonstrably false).
4550 # However, it does implement ECH, which is a vt220 feature. And there are
4551 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4552 # more of its bugs using vttest.
4554 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4555 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4557 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4558 # operations. Shift-tab generates a distinct sequence so it can be argued
4559 # that it implements kcbt.
4560 gnome-rh80|GNOME Terminal,
4562 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4563 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4565 # GNOME Terminal 2.2.1 (Redhat 9.0)
4567 # bce and msgr are repaired.
4568 gnome-rh90|GNOME Terminal,
4570 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4571 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4572 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4575 # GNOME Terminal 2.14.2 (Fedora Core 5)
4576 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4577 gnome-fc5|GNOME Terminal,
4579 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4580 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4582 # GNOME Terminal 2.18.1 (2007 snapshot)
4584 # For any "recent" version of gnome-terminal, it is futile to attempt to
4585 # support modifiers on cursor- and keypad keys because the program usually
4586 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4587 # of the keys (which more/less correspond to the termcap values), and will
4588 # interpret those according to the $TERM value, but others not in the
4589 # terminfo according to some constantly changing set of hacker guidelines -TD
4590 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4591 use=xterm+pcc2, use=gnome-fc5,
4592 gnome-2007|GNOME Terminal snapshot 2.18.1,
4595 # GNOME Terminal 2.22.3 (2008 snapshot)
4597 # In vttest, it claims to be a vt220 with national replacement character-sets,
4598 # but aside from the identifier string, implements only a small fraction of
4599 # vt220's behavior, which will make it less usable on a VMS system (unclear
4600 # what the intent of the developer is, since the NRC feature exposed in vttest
4601 # by this change does not work).
4602 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4603 use=vte+pcfkeys, use=vte-2007,
4604 gnome-2008|GNOME Terminal snapshot 2.22.3,
4607 # GNOME Terminal 3.6.0 (2012)
4608 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
4609 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
4612 # Testing with tack shows that flash does not/has not worked -TD
4613 vte-2012|VTE 0.34.1,
4614 flash@, ritm=\E[23m, sitm=\E[3m, use=vte-2008,
4615 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
4616 # 61 differences from a correct entry for gnome terminal.
4617 gnome-2012|GNOME Terminal 3.6.0,
4620 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4621 # supply key information which is not built into the program. With 2.22.3,
4622 # this list is built into the program (which addresses the inadvertant use of
4623 # random terminfo data, though using a set of values which does not correspond
4624 # to any that xterm produces - still not solving the problem that GNOME
4625 # terminal hardcodes the $TERM variable as "xterm").
4627 # terminfo modifier code keys
4628 # kf13-kf24 shift 2 F1 to F12
4629 # kf25-kf36 control 5 F1 to F12
4630 # kf37-kf48 shift/control 6 F1 to F12
4631 # kf49-kf60 alt 3 F1 to F12
4632 # kf61-kf63 shift-alt 4 F1 to F3
4634 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4635 # no parameters. This appears to be rote copying based on xterm+pcc0.
4636 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4637 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4638 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4639 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4640 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4641 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4642 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4644 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4647 vte|VTE aka GNOME Terminal,
4649 gnome|GNOME Terminal,
4652 # palette is hardcoded...
4653 vte-256color|VTE with xterm 256-colors,
4654 use=xterm+256color, use=vte,
4655 gnome-256color|GNOME Terminal with xterm 256-colors,
4658 # XFCE Terminal 0.2.5.4beta2
4660 # This is based on some of the same source code, e.g., the VTE library, as
4661 # gnome-terminal, but has fewer features, fails more screens in vttest.
4662 # Since most of the terminfo-related behavior is due to the VTE library,
4663 # the terminfo is the same as gnome-terminal.
4668 # Multi-Gnome-Terminal 1.6.2
4670 # This does not use VTE, and does have different behavior (compare xfce and
4672 mgt|Multi GNOME Terminal,
4673 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4676 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4677 # or not is debatable).
4680 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4683 # (formerly known as kvt)
4685 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4686 # simplify this entry (and point out why konsole isn't xterm), we base this on
4687 # xterm-r6. The default keyboard appears to be 'linux'.
4690 # a) konsole implements several features from XFree86 xterm, though none of
4691 # that is documented - except of course in its source code - apparently
4692 # because its implementors are unaccustomed to reading documentation - as
4693 # evidenced by the sparse and poorly edited documentation distributed with
4694 # konsole. Some features such as the 1049 private mode are recognized but
4695 # incorrectly implemented as a duplicate of the 47 private mode.
4696 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4697 # sends PC-style escapes rather than vt100.
4698 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4699 # parse some control sequences. Also fails vttest Primary Device Attributes
4700 # by sending a bogus code (in the source it says it's supposed to be a
4701 # vt220, which is doubly incorrect because it does not implement vt220
4702 # control sequences except for a few special cases). Treat it as a
4703 # mildly-broken vt102.
4705 # Update for konsole 1.3.2:
4706 # The 1049 private mode works (but see the other xterm screens in vttest).
4707 # Primary Device Attributes now returns the code for a vt100 with advanced
4708 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4710 # Updated for konsole 1.6.4:
4711 # add konsole-solaris
4713 # Updated for konsole 1.6.6:
4714 # add control-key modifiers for function-keys, etc.
4716 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4717 # different from xterm (and vt100's). They have the same behavior in this
4718 # detail, but it is unclear which copies the other.
4719 konsole-base|KDE console window,
4722 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4723 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4724 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4725 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4726 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4727 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4728 rmso=\E[27m, rmul=\E[24m,
4729 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4730 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4731 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4732 use=ecma+color, use=xterm-r6,
4733 konsole-linux|KDE console window with linux keyboard,
4734 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4735 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4736 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4737 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4738 konsole-solaris|KDE console window with Solaris keyboard,
4739 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4740 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4741 # than testing the code.
4742 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4743 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4744 # The value for kbs reflects local customization rather than the settings used
4745 # for XFree86 xterm.
4746 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4747 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4749 # Konsole does not implement shifted cursor-keys.
4750 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4751 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4753 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4754 # it is still useful for deriving the other entries.
4755 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4756 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4757 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4758 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4759 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4760 khome=\E[H, use=konsole-base,
4761 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4762 kbs=^H, kdch1=\177, use=konsole-vt100,
4763 konsole-16color|klone of xterm-16color,
4764 ncv#32, use=ibm+16color, use=konsole,
4765 # make a default entry for konsole
4766 konsole|KDE console window,
4769 # palette is hardcoded...
4770 konsole-256color|KDE console window with xterm 256-colors,
4771 use=xterm+256setaf, use=konsole,
4774 # http://mlterm.sourceforge.net/
4776 mlterm|multi lingual terminal emulator,
4779 # Tested mlterm 3.2.2:
4780 # mlterm 3.x has made changes, but they are not reflected in the included
4781 # mlterm.ti; this entry is based on testing with tack and vttest -TD
4782 mlterm3|multi lingual terminal emulator,
4783 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
4784 use=xterm+app, use=xterm+pcf0, use=xterm+pcc2,
4785 use=xterm+pce2, use=mlterm2,
4787 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4789 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4792 # The function keys are numbered based on shift/control/alt modifiers, except
4793 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4794 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4795 # how it is configured.
4797 # kf1 to kf12 \E[11~ to \E[24~
4798 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4799 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4800 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4801 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4802 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4803 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4804 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4806 mlterm2|multi lingual terminal emulator,
4807 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4808 colors#8, cols#80, it#8, lines#24, pairs#64,
4809 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4810 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4811 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4812 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4813 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4814 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4815 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4816 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4817 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4818 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4819 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4820 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4821 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4822 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4823 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4824 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4825 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4826 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4827 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4828 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4829 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4830 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4831 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4832 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4833 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4835 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4836 # looks in its termcap to decide which string to send. If it used terminfo
4837 # (when available), it could use the extended names introduced for xterm.
4838 mlterm+pcfkeys|fragment for PC-style fkeys,
4839 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4840 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4841 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4842 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4843 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4844 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4845 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4846 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4847 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4849 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4850 use=xterm+256color, use=mlterm,
4853 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4854 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4857 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4858 # but some applications don't work with that.
4859 # It also has an AIX extension
4863 # but the latter does not work correctly.
4865 # The distributed terminfo says it implements hpa and vpa, but they are not
4866 # implemented correctly, using relative rather than absolute positioning.
4868 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4869 # Since rxvt is not really compatible with xterm, it should be configured as
4870 # "rxvt" or "rxvt-color".
4872 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4873 # remove km as per tack test -TD
4874 rxvt-basic|rxvt terminal base (X Window System),
4875 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4876 cols#80, it#8, lines#24,
4877 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4878 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4879 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4880 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4881 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4882 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4883 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4884 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4885 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4886 ind=^J, is1=\E[?47l\E=\E[?1l,
4887 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4888 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4889 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4891 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4892 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4893 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4894 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4895 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4896 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4897 use=rxvt+pcfkeys, use=vt220+keypad,
4898 # Key Codes from rxvt reference:
4900 # Note: Shift + F1-F10 generates F11-F20
4902 # For the keypad, use Shift to temporarily override Application-Keypad
4903 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4904 # is off, escape sequences toggle Application-Keypad setting.
4905 # Also note that values of Home, End, Delete may have been compiled
4906 # differently on your system.
4908 # Normal Shift Control Ctrl+Shift
4909 # Tab ^I ESC [ Z ^I ESC [ Z
4910 # BackSpace ^H ^? ^? ^?
4911 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4912 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4913 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4914 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4915 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4916 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4917 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4918 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4919 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4920 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4921 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4922 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4923 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4924 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4925 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4926 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4927 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4928 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4929 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4930 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4931 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4932 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4933 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4934 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4935 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4936 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4937 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4938 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4939 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4942 # Up ESC [ A ESC [ a ESC O a ESC O A
4943 # Down ESC [ B ESC [ b ESC O b ESC O B
4944 # Right ESC [ C ESC [ c ESC O c ESC O C
4945 # Left ESC [ D ESC [ d ESC O d ESC O D
4946 # KP_Enter ^M ESC O M
4947 # KP_F1 ESC O P ESC O P
4948 # KP_F2 ESC O Q ESC O Q
4949 # KP_F3 ESC O R ESC O R
4950 # KP_F4 ESC O S ESC O S
4951 # XK_KP_Multiply * ESC O j
4952 # XK_KP_Add + ESC O k
4953 # XK_KP_Separator , ESC O l
4954 # XK_KP_Subtract - ESC O m
4955 # XK_KP_Decimal . ESC O n
4956 # XK_KP_Divide / ESC O o
4968 # The source-code for rxvt actually defines mappings for F21-F35, using
4969 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4970 # are rare, so this entry uses the shift- and control-modifiers as in
4971 # xterm+pcfkeys to define keys past F12.
4973 # kIC is normally not used, since rxvt performs a paste for that (shifted
4974 # insert), unless private mode 35 is set.
4976 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4977 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4978 rxvt+pcfkeys|fragment for PC-style fkeys,
4979 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4980 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4981 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4982 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4983 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4984 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4985 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4986 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4987 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4988 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4989 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4990 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4991 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4992 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4993 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4994 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4995 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4996 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4997 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4998 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5000 rxvt|rxvt terminal emulator (X Window System),
5002 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5003 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5004 rxvt-color|rxvt terminal emulator (X Window System),
5006 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5007 use=xterm+256color, use=rxvt,
5008 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5009 use=xterm+88color, use=rxvt,
5010 rxvt-xpm|rxvt terminal emulator (X Window System),
5012 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5013 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5015 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5016 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
5019 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5020 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5021 rxvt-16color|xterm with 16 colors like aixterm,
5022 ncv#32, use=ibm+16color, use=rxvt,
5027 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5028 # makes its function-keys different from other flavors of rxvt -TD
5029 mrxvt|multitabbed rxvt,
5031 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5032 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5033 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5034 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5035 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5036 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5039 mrxvt-256color|multitabbed rxvt with 256 colors,
5040 use=xterm+256color, use=mrxvt,
5043 # From: Michael Jennings <mej@valinux.com>
5047 # removed kf0 which conflicts with kf10 -TD
5048 # remove cvvis which conflicts with cnorm -TD
5049 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5050 # but does otherwise follow the rxvt+pcfkeys model -TD
5051 # remove nonworking flash -TD
5052 # remove km as per tack test -TD
5053 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5054 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5055 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5056 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5057 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5058 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5059 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5060 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5061 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5062 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5063 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5064 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5065 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5066 is1=\E[?47l\E>\E[?1l,
5067 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5068 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5069 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5070 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5071 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5072 rmso=\E[27m, rmul=\E[24m,
5073 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5074 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5076 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5077 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5078 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5079 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5082 Eterm-256color|Eterm with xterm 256-colors,
5083 use=xterm+256color, use=Eterm,
5085 Eterm-88color|Eterm with 88 colors,
5086 use=xterm+88color, use=Eterm,
5089 # Based on rxvt 2.4.8, it has a few differences in key bindings
5090 aterm|AfterStep terminal,
5092 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5096 # This is not based on xterm's source...
5097 # vttest shows several problems with keyboard, cursor-movements.
5098 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5099 xiterm|internationalized terminal emulator for X,
5101 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5105 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5106 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5107 # chars look like --esr)
5108 hpterm|X-hpterm|hp X11 terminal emulator,
5109 am, da, db, mir, xhp,
5110 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5111 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
5112 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5113 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5114 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
5115 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5116 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5117 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5118 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5119 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5120 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5121 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5122 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5123 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5124 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5126 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5127 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5128 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5129 # HPUX 11 provides a color version.
5130 hpterm-color|HP X11 terminal emulator with color,
5134 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5135 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5138 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5139 # It corresponds to emu's internal emulation:
5141 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5142 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5143 # fixes: add civis, cnorm, sgr -TD
5144 emu|emu native mode,
5145 am, bce, mir, msgr, xon,
5146 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5147 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
5148 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5149 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5150 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5151 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5152 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5153 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5154 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5155 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5156 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
5157 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5158 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5159 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5160 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5161 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5162 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5163 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5165 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
5166 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5168 # vt220 Terminfo entry for the Emu emulation, corresponds to
5170 # with NumLock set (to make the keypad transmit kf0-kf9).
5171 # fixes: add am, xenl, corrected sgr0 -TD
5172 emu-220|Emu-220 (vt200-7bit mode),
5174 cols#80, it#8, lines#24, vt#200,
5175 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5176 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5177 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
5178 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5179 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5180 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5181 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5182 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5183 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5184 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5185 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5186 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5187 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5188 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5189 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5190 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5191 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5192 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5193 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5194 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5195 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5196 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5197 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5198 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5201 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5202 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5203 # indicate that it emulates more than one terminal, but incompletely.
5205 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5206 # It is based on vt102's entry, with some subtle differences, but also
5208 # supports ANSI colors (except for 'op' string)
5209 # apparently implements alternate screen like xterm
5210 # does not use padding, of course.
5211 mvterm|vv100|SwitchTerm aka mvTERM,
5212 am, eslok, hs, km, mir, msgr, xenl,
5213 colors#8, cols#80, it#8, lines#24, pairs#64,
5214 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5215 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
5216 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5217 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5218 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5219 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5220 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5221 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5222 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
5223 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5224 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5225 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5226 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5228 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5229 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5230 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5231 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5232 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5233 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5237 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5239 # "mterm -type ansi" sets $TERM to "ansi"
5240 mterm-ansi|ANSI emulation,
5243 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5244 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5245 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5246 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5247 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5248 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5249 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5250 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5251 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5252 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5254 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5255 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5257 # mterm normally sets $TERM to "mterm"
5258 mterm|mouse-sun|Der Mouse term,
5261 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
5262 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5263 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
5264 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5265 # "mterm -type decansi" sets $TERM to "decansi"
5267 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5268 decansi|ANSI emulation with DEC compatibility hacks,
5269 am, mir, msgr, xenl,
5270 colors#8, it#8, pairs#64,
5271 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5272 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5273 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5274 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5275 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5276 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5277 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5278 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5279 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5280 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5281 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5282 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5283 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5284 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5285 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5286 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5287 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5288 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5289 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5290 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5291 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5292 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5293 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5294 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5295 u7=\E[6n, vpa=\E[%i%p1%dd,
5298 # http://vwm.sourceforge.net/
5300 # VWM 2.0.2 (2009-05-01)
5301 # vwmterm is a terminal emulator written for the VWM console window manager.
5302 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5304 am, bce, ccc, mir, msgr, npc, xenl, xon,
5306 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5307 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5308 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
5309 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5310 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5311 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5312 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
5313 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5314 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5315 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5316 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5317 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5318 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5319 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5320 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5321 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5322 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5326 # MGR is a Bell Labs window system lighter-weight than X.
5327 # These entries describe MGR's xterm-equivalent.
5328 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5331 mgr|Bellcore MGR (non X) window system terminal emulation,
5333 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
5334 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5335 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5336 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5337 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5338 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5339 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5340 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
5341 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5343 mgr-sun|Mgr window with Sun keyboard,
5344 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5345 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5346 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5347 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5348 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5349 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5350 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5351 mgr-linux|Mgr window with Linux keyboard,
5352 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5353 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5354 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5355 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5356 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5362 # This version uses a table which supports a single modifier (a subset of
5363 # xterm's keys, using the same scheme). Because it supports only a single
5364 # modifier in this table, function keys f36-f48 are normally unavailable
5365 # because they are assigned to modifier-4.
5367 # The program assigns TERM to match the program name (the upstream source says
5368 # "st", but Debian renames it to "stterm").
5370 # The source includes two entries which are not useful here:
5371 # st-meta| simpleterm with meta key,
5372 # st-meta-256color| simpleterm with meta key and 256 colors,
5373 # because st's notion of "meta" does not correspond to the terminfo definition.
5374 # Rather, it acts like xterm - when the meta feature is disabled.
5377 st|stterm| simpleterm 0.4.1,
5378 am, bce, hs, mir, msgr, ul, xenl,
5379 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5380 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5381 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5382 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
5383 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5384 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5385 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5386 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5387 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5388 enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H,
5389 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5390 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
5391 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
5392 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
5393 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
5394 kbs=\177, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
5395 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5396 kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
5397 kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
5398 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
5399 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5400 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5401 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5402 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5403 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5404 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5405 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5406 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5407 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5408 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5409 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
5410 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5411 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5412 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5413 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5414 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5415 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5416 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, op=\E[39;49m,
5417 rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B,
5418 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
5419 rmul=\E[m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
5420 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5421 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5422 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5423 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%;m,
5424 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5425 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5426 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5427 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
5431 # Note: the original terminfo description uses leading blank to persuade
5432 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5435 # Reading the code shows it should work for aixterm 16-colors
5436 # - added st-16color
5439 # - set eo (erase-overstrike)
5441 # - tbc doesn't work
5443 # - cbt doesn't work
5444 # - shifted cursor-keys send sequences like rxvt
5445 # - sgr referred to unimplemented "invis" mode.
5446 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5447 simpleterm|old-st| simpleterm 0.1.1,
5448 am, eo, mir, msgr, ul, xenl,
5449 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5450 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5451 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5452 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5453 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5454 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5455 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5456 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5457 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
5458 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5459 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5460 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5461 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5462 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5463 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5464 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5465 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
5466 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5467 st-16color|stterm-16color|simpleterm with 16-colors,
5468 use=ibm+16color, use=st,
5469 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5470 # shown in the titlebar.
5472 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5473 # characters, making the choice nonportable.
5474 st-256color|stterm-256color|simpleterm with 256 colors,
5475 use=xterm+256color, use=st,
5478 # https://code.google.com/p/jessies/
5479 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5480 # Debian/current -TD (2011/8/20)
5482 # There are some packaging problems:
5483 # a) using Java, the program starts off using 50Mb, and climbs from there,
5484 # up to 114Mb after testing (no scrollback).
5485 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5486 # (two copies, just in case the host happens to be Mac OS X).
5487 # I deleted this after testing with tack.
5489 # Issues/features found with tack:
5490 # a) tbc does not work (implying that hts also is broken).
5491 # Comparing with the tabs utility shows a problem with the last tabstop on
5493 # b) has xterm-style shifted function-key strings
5494 # meta also is used, but control is ignored.
5495 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
5496 # d) some combinations of shift/control send xterm-style sequences for
5497 # insert/delete/home/end.
5498 # e) numeric keypad sends only numbers (compare with vttest).
5499 # f) meta mode (km) is not implemented.
5501 # Issues found with ncurses test-program:
5502 # a) bce is inconsistently implemented
5503 # b) widths of Unicode values above 256 do not always agree with wcwidth.
5505 # Checked with vttest, found low degree of compatibility there.
5507 # Checked with xterm's scripts, found that the 256-color palette is fixed.
5511 # b) corrected sgr0 to reset alternate character set
5512 # c) modified smacs/rmacs to use SCS rather than SI/SO
5515 terminator|Terminator no line wrap,
5516 eo, mir, msgr, xenl, xon,
5517 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
5518 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5519 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5520 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5521 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
5522 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5523 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5524 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5525 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
5526 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
5527 is1=\E[?47l\E=\E[?1l,
5528 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5529 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5530 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5531 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5532 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5533 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5534 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5535 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
5536 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
5537 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5538 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
5539 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
5540 setaf=\E[38;5;%p1%dm,
5541 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5542 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
5543 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
5547 # http://enlightenment.org
5549 # Tested terminology-0.3.0, using tack and vttest. This is not a vt100
5550 # emulator, nor is it compatible with xterm, but it uses a few features from
5554 # cursor does not fill on focus
5555 # there are pervasive problems with clearing/erasing parts of the screen
5556 # resizing the window causes it to stop listening to the keyboard
5558 # doesn't understand vt100 CPR needed for resize
5563 # uses bce model for colors, but (see below) fails the vttest screens
5564 # has partial support for 256color feature.
5566 # ctrl+shift (ignored)
5568 # shift-alt modifier -> shift (2)
5572 # tack modifiers do not work for fkeys
5573 # ctrl + khome/kend works - none of the other modifiers do
5575 # spits lots of messages from termptyesc.c especially in vttest.
5576 # no 132-column mode
5577 # fails menu 1, 2 (definitely not vt100-compatible)
5579 # secondary report says (perhaps... vt420): \E[>41;285;0c
5580 # CHA, HPR, VPA, CNL, CPL work
5581 # BCE with ED/EL - fail
5582 # BCE with ECH/indexing - fail
5584 # unlike teken, background light/dark works
5586 # X10 and Normal mouse work
5587 # Any-event mouse works
5588 # Mouse button-event works
5589 terminology|EFL-based terminal emulator,
5591 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
5592 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5593 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5594 kind=\E[1;2B, kri=\E[1;2A,
5595 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
5596 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
5597 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
5598 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
5599 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
5600 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
5601 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
5602 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
5603 kRIT7=\E[1;7C, kUP=\E[1;2A, use=vt100,
5606 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
5609 # Columbus UNIX virtual terminal. This terminal also appears in
5610 # UNIX 4.0 and successors as line discipline 1 (?), but is
5611 # undocumented and does not really work quite right.
5612 cbunix|cb unix virtual terminal,
5614 cols#80, lines#24, lm#0,
5615 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5616 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
5617 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
5618 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
5619 smso=\Ea^D, smul=\Ea^A,
5620 # (vremote: removed obsolete ":nl@:" -- esr)
5621 vremote|virtual remote terminal,
5623 cols#79, use=cbunix,
5625 pty|4bsd pseudo teletype,
5626 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
5627 smso=\Ea$, smul=\Ea!, use=cbunix,
5631 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
5632 eterm|gnu emacs term.el terminal emulation,
5635 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5636 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5637 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5638 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5639 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5640 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5641 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
5642 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
5643 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
5646 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
5647 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
5648 am, mir, msgr, xenl,
5649 colors#8, cols#80, lines#24, pairs#64,
5650 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5651 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5652 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5654 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5655 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5656 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
5657 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5658 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
5659 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
5660 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5661 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
5662 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
5663 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5664 u6=\E[%i%d;%dR, u7=\E[6n,
5668 # Entries for use by the `screen' program by Juergen Weigert,
5669 # Michael Schroeder, Oliver Laumann. The screen and
5670 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
5671 # come from University of Wisconsin and may be older.
5672 # (screen: added <cnorm> on ANSI model -- esr)
5674 # 'screen' defines extensions to termcap. Some are used in its terminal
5676 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
5677 # AX (bool) Does understand ANSI set default fg/bg color
5678 # (\E[39m / \E[49m).
5679 # S0 (str) Switch charset 'G0' to the specified charset.
5680 # E0 (str) Switch charset 'G0' back to standard charset.
5682 # Initially tested with screen 3.09.08
5684 # According to its manual page
5686 # Screen is a full-screen window manager that multiplexes a physical
5687 # terminal between several processes (typically interactive shells). Each
5688 # virtual terminal provides the functions of a DEC VT100 terminal and, in
5689 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
5690 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
5691 # multiple character sets).
5693 # However, there is a design error in its support for video highlights. The
5694 # program uses a table (rendlist) which equates the SGR codes to terminal
5695 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
5696 # is modified only by the presence or absence of the corresponding capabilities.
5697 # Not by their values.
5699 # If screen sets the TERMCAP variable, it uses hardcoded strings which
5700 # correspond to the rendlist table.
5702 # The table gives this information:
5714 # 22 reset bold, standout and dim
5716 # 24 reset underline
5721 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
5722 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
5723 # Without some redesign of screen, it is not possible to extend the set of
5724 # capabilities. Substitution would be possible, e.g., sending italics in
5725 # place of underline.
5727 # Because screen uses hard-coded parsing, it does not check if two capabilities
5728 # use the same value. For example, changing standout to be the same as any of
5729 # the other capabilities will confuse screen. Curses applications which use
5730 # sgr are not impacted (because that usually resets all capabilities before
5731 # setting any), but termcap applications do not use sgr -TD
5732 screen|VT 100/ANSI X3.64 virtual terminal,
5733 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
5734 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
5735 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5736 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5737 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
5738 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5739 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5740 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5741 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5742 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
5743 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5744 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
5745 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5746 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5747 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5748 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5749 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
5750 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5751 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
5752 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
5753 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5754 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
5755 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
5756 S0=\E(%p1%c, use=ecma+color,
5757 # The bce and status-line entries are from screen 3.9.13 (and require some
5758 # changes to .screenrc).
5759 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
5762 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
5763 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
5765 # ======================================================================
5766 # Entries for GNU Screen with 16 colors.
5767 # Those variations permit to benefit from 16 colors palette, and from
5768 # bold font and blink attribute separated from bright colors. But they
5769 # are less portable than the generic "screen" 8 color entries: Their
5770 # usage makes real sense only if the terminals you attach and reattach
5771 # do all support 16 color palette.
5773 screen-16color|GNU Screen with 16 colors,
5774 use=ibm+16color, use=screen,
5776 screen-16color-s|GNU Screen with 16 colors and status line,
5777 use=ibm+16color, use=screen-s,
5779 screen-16color-bce|GNU Screen with 16 colors and BCE,
5780 use=ibm+16color, use=screen-bce,
5782 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
5783 bce, use=ibm+16color, use=screen-s,
5785 # ======================================================================
5786 # Entries for GNU Screen 4.02 with --enable-colors256.
5788 screen-256color|GNU Screen with 256 colors,
5789 use=xterm+256setaf, use=screen,
5791 screen-256color-s|GNU Screen with 256 colors and status line,
5792 use=xterm+256setaf, use=screen-s,
5794 screen-256color-bce|GNU Screen with 256 colors and BCE,
5795 bce, use=xterm+256setaf, use=screen-bce,
5797 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
5798 bce, use=xterm+256setaf, use=screen-s,
5800 # ======================================================================
5802 # Read the fine manpage:
5803 # When screen tries to figure out a terminal name for
5804 # itself, it first looks for an entry named "screen.<term>",
5805 # where <term> is the contents of your $TERM variable. If
5806 # no such entry exists, screen tries "screen" (or "screen-w"
5807 # if the terminal is wide (132 cols or more)). If even this
5808 # entry cannot be found, "vt100" is used as a substitute.
5810 # Notwithstanding the manpage, screen uses its own notion of the termcap
5811 # and some keys from "screen.<term>" are ignored. Here is an entry which
5812 # covers those (tested with screen 4.00.02) -TD
5813 screen+fkeys|function-keys according to screen,
5814 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5817 # See explanation before "screen" entry. Cancel italics so that applications
5818 # do not assume screen supports the feature. Add this tweak to entries which
5819 # extend screen for terminals which do support italics.
5820 screen+italics|screen cannot support italics,
5823 # Here are a few customized entries which are useful -TD
5826 # (a) screen does not support invis.
5827 # (b) screen's implementation of bw is incorrect according to tack.
5828 # (c) screen appears to hardcode the strings for khome/kend, making it
5829 # necessary to override the "use=" clause's values (screen+fkeys).
5830 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5831 # which is NOT the same as the terminfo screen.<term>.
5832 # (e) when screen finds one of these customized entries, it sets $TERM to
5833 # match. Hence, no "screen.xterm" entry is provided, since that would
5834 # create heartburn for people running remote xterm's.
5836 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5837 # since the default translations override the built-in keycode
5838 # translation. They are suppressed here to show what is tested by tack.
5839 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5841 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5842 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5843 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
5844 # xterm-r6 does not really support khome/kend unless it is propped up by
5845 # the translations resource.
5846 screen.xterm-r6|screen customized for X11R6 xterm,
5847 bw, use=screen+fkeys, use=xterm-r6,
5848 # Color applications running in screen and TeraTerm do not play well together
5849 # on Solaris because Sun's curses implementation gets confused.
5850 screen.teraterm|disable ncv in teraterm,
5852 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5853 use=screen+fkeys, use=screen,
5855 screen.rxvt|screen in rxvt,
5857 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5858 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5859 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5860 screen.Eterm|screen in Eterm,
5861 use=screen+fkeys, use=Eterm,
5862 screen.mrxvt|screen in mrxvt,
5863 use=screen+fkeys, use=mrxvt,
5864 screen.vte|screen in any VTE-based terminal,
5865 use=screen+italics, use=screen+fkeys, use=vte,
5866 screen.gnome|screen in GNOME Terminal,
5867 use=screen+italics, use=screen+fkeys, use=gnome,
5868 screen.konsole|screen in KDE console window,
5869 use=screen+italics, use=screen+fkeys, use=konsole,
5870 # fix the backspace key
5871 screen.linux|screen in linux console,
5873 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5874 screen.mlterm|screen in mlterm,
5875 use=screen+fkeys, use=mlterm,
5877 # The default "screen" entry is reasonably portable, but not optimal for the
5878 # most widely-used terminal emulators. The "bce" capability is supported in
5879 # screen since 3.9.13, and when used, will require fewer characters to be sent
5880 # to the terminal for updates.
5882 # If you are using only terminals which support bce, then you can use this
5883 # feature in your screen configuration.
5885 # Adding these lines to your ".screenrc" file will allow using these customized
5890 screen-bce.xterm-new|screen optimized for modern xterm,
5892 ech@, use=screen+italics, use=screen.xterm-new,
5893 screen-bce.rxvt|screen optimized for rxvt,
5895 ech@, use=screen.rxvt,
5896 screen-bce.Eterm|screen optimized for Eterm,
5898 ech@, use=screen.Eterm,
5899 screen-bce.mrxvt|screen optimized for mrxvt,
5901 ech@, use=screen.mrxvt,
5902 screen-bce.gnome|screen optimized for GNOME-Terminal,
5904 ech@, use=screen+italics, use=screen.gnome,
5905 screen-bce.konsole|screen optimized for KDE console window,
5907 ech@, use=screen+italics, use=screen.konsole,
5908 screen-bce.linux|screen optimized for linux console,
5910 ech@, use=screen.linux,
5911 screen-bce.mlterm|screen optimized for mlterm,
5913 ech@, use=screen.mlterm,
5915 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5916 cols#132, use=screen,
5918 screen2|old VT 100/ANSI X3.64 virtual terminal,
5919 cols#80, it#8, lines#24,
5920 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5921 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5922 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5923 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5924 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5925 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5926 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5927 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5928 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5929 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5930 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5931 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5932 screen3|older VT 100/ANSI X3.64 virtual terminal,
5934 cols#80, it#8, lines#24,
5935 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5936 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5937 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5938 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5939 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5940 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5941 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5942 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5943 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5944 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5945 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5946 smul=\E[4m, tbc=\E[3g,
5950 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5951 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5952 # been maintained until recently by the National Center for Supercomputer
5953 # Applications, and it is feature rich, stable and free. It can be downloaded
5954 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5955 # xterm+sl, and the docs at NCSA. It works well.
5957 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5958 # The terminal options should be set as follows:
5959 # Xterm sequences ON
5960 # use VT wrap mode ON
5961 # use Emacs arrow keys OFF
5962 # CTRL-COMND is Emacs meta ON
5964 # answerback string: "ncsa-vt220-8"
5965 # setup keys: all disabled
5967 # Application mode is not used.
5969 # Other special mappings:
5976 # PAGEDOWN Next Screen
5978 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5981 # The status-line manipulation is a mapping of the xterm-compatible control
5982 # sequences for setting the window-title. So you must use tsl and fsl in
5983 # pairs, since the latter ends the string that is loaded to the window-title.
5984 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5985 am, km, mir, msgr, xenl,
5986 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5987 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5988 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5989 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5990 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5991 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5992 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5993 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
5994 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5995 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5997 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5998 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5999 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6000 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6001 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6002 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6003 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6004 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6005 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6006 rmso=\E[27m, rmul=\E[24m,
6007 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6008 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
6009 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6010 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6011 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6012 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6013 use=ncsa-m, use=klone+color,
6014 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6016 dsl@, fsl@, tsl@, use=ncsa,
6017 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6019 dsl@, fsl@, tsl@, use=ncsa-m,
6021 # The documented function-key mapping refers to the Apple Extended Keyboard
6022 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6023 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6024 # some keyboards and many applications require these as F1-F4.
6026 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6027 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6028 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6029 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6030 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6031 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6033 #### Pilot Pro Palm-Top
6035 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6036 # http://www.ai/~iang/TGssh/
6037 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6040 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
6041 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6042 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
6045 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6046 # These entries are for the Embeddable Linux Kernel System (ELKS)
6047 # project - an heavily stripped down Linux to be run on 16 bit
6048 # boxes or, eventually, to be used in embedded systems - and have been
6049 # adapted from the stock ELKS termcap. The project itself looks stalled,
6050 # and the latest improvements I know of date back to March 2000.
6052 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6053 # as an added bonus, this deals with all the capabilities common to
6054 # both VT52 and ANSI (or, eventually, "special") modes.
6056 elks-glasstty|ELKS glass-TTY capabilities,
6058 cols#80, it#8, lines#25,
6059 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
6062 elks-vt52|ELKS vt52 console,
6063 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6064 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6065 home=\EH, use=elks-glasstty,
6067 elks-ansi|ELKS ANSI console,
6068 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6069 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6070 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6072 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6073 # instead of VT52, but the "elks" entry still refers to the latter.
6075 elks|default ELKS console,
6078 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6079 # one but in screen size
6081 sibo|ELKS SIBO console,
6082 cols#61, it#8, lines#20, use=elks-vt52,
6084 ######## COMMERCIAL WORKSTATION CONSOLES
6090 # This is from the OSF/1 Release 1.0 termcap file
6091 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6094 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6095 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6096 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6097 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6098 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6103 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6104 oldsun|Sun Microsystems Workstation console,
6105 OTbs, am, km, mir, msgr,
6106 cols#80, it#8, lines#34,
6107 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
6108 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6109 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6110 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6111 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6112 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6113 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6114 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6115 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6116 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6117 sun-il|Sun Microsystems console with working insert-line,
6120 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6121 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6122 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6123 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6124 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6125 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
6126 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6127 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6128 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6129 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6130 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6131 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6132 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6133 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6134 # flake out on the last line. Unfortunately, without them the terminal has no
6136 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6137 il@, il1@, use=sun-il,
6138 # If you are using an SS5, change the sun definition to use sun-ss5.
6139 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6142 sun+sl|Sun Workstation window status line,
6144 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6146 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6147 sun-s|Sun Microsystems Workstation window with status line,
6149 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6150 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6152 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6153 sun-48|Sun 48-line window,
6154 cols#80, lines#48, use=sun,
6155 sun-34|Sun 34-line window,
6156 cols#80, lines#34, use=sun,
6157 sun-24|Sun 24-line window,
6158 cols#80, lines#24, use=sun,
6159 sun-17|Sun 17-line window,
6160 cols#80, lines#17, use=sun,
6161 sun-12|Sun 12-line window,
6162 cols#80, lines#12, use=sun,
6163 sun-1|Sun 1-line window for sysline,
6166 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
6167 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6168 ich1@, rmir@, smir@, use=sun,
6169 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6171 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6172 sun-type4|Sun Workstation console with type 4 keyboard,
6173 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6174 kcuu1=\E[215z, use=sun-il,
6176 # Most of the current references to sun-color are from users wondering why this
6177 # is the default on install. Details from reading the wscons manpage, adding
6178 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6179 # when those were added -TD (2005-05-28)
6181 # According to wscons manpage, color is supported only on IA systems.
6182 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6183 # does not list these. It also sets ncv#3, however that corresponds to
6184 # underline and standout.
6186 # Since the documentation and terminfo do not agree, see also current code at
6187 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6189 # That (actually a different driver which "supports" sun-color) also supports
6196 # It supports bold, but not underline -TD (2009-09-19)
6197 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6198 colors#8, ncv#3, pairs#64,
6199 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6200 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6201 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6202 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6203 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6204 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6205 smso=\E[7m, use=sun,
6210 # (wsiris: this had extension capabilities
6211 # :HS=\E7F2:HE=\E7F7:\
6212 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6213 # See the note on Iris extensions near the end of this file.
6214 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6215 # <flash> from BRL -- esr)
6216 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6217 OTbs, OTnc, OTpt, am,
6218 OTkn#3, cols#80, it#8, lines#40,
6219 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6220 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6221 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6222 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6223 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6224 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6225 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6226 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6231 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6232 # environment). Note: these have nothing to do with Sony's News workstation
6236 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6237 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6238 psterm|psterm-basic|NeWS psterm-80x34,
6239 OTbs, am, hs, km, ul,
6240 cols#80, it#8, lines#34,
6241 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6242 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6243 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6244 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6245 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6246 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6247 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6249 psterm-96x48|NeWS psterm 96x48,
6250 cols#96, lines#48, use=psterm,
6251 psterm-90x28|NeWS psterm 90x28,
6252 cols#90, lines#28, use=psterm,
6253 psterm-80x24|NeWS psterm 80x24,
6254 cols#80, lines#24, use=psterm,
6255 # This is a faster termcap for psterm. Warning: if you use this termcap,
6256 # some control characters you type will do strange things to the screen.
6257 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6258 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6259 OTbs, am, hs, km, ul,
6260 cols#80, it#8, lines#34,
6261 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6262 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6263 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6264 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6265 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6266 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6267 smso=^Oo, smul=^Ou, tsl=^Ol,
6271 # Use `glasstty' for the Workspace application
6274 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6277 cols#80, it#8, lines#24,
6278 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6279 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6280 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6281 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6282 nextshell|NeXT Shell application,
6285 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
6288 #### Sony NEWS workstations
6291 # (news-unk: this had :KB=news: -- esr)
6292 news-unk|SONY NEWS vt100 emulator common entry,
6293 OTbs, OTpt, am, xenl,
6295 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6296 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6297 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6298 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6299 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6300 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6301 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6302 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6303 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6304 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6305 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6306 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6308 # (news-29: this had :TY=ascii: --esr)
6310 lines#29, use=news-unk,
6311 # (news-29-euc: this had :TY=euc: --esr)
6314 # (news-29-sjis: this had :TY=sjis: --esr)
6318 # (news-33: this had :TY=ascii: --esr)
6320 lines#33, use=news-unk,
6321 # (news-33-euc: this had :TY=euc: --esr)
6324 # (news-33-sjis: this had :TY=sjis: --esr)
6328 # (news-42: this had :TY=ascii: --esr)
6330 lines#42, use=news-unk,
6331 # (news-42-euc: this had :TY=euc: --esr)
6334 # (news-42-sjis: this had :TY=sjis: --esr)
6338 # NEWS-OS old termcap entry
6340 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6341 news-old-unk|SONY NEWS vt100 emulator common entry,
6342 OTbs, OTpt, am, xenl,
6344 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6345 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6346 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6347 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6348 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6349 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6350 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6351 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6352 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6354 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6355 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6358 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6361 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
6362 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
6364 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
6367 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
6368 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
6371 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6374 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
6375 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
6378 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6381 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
6382 # also the alias vt100-bm.
6383 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
6386 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
6389 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
6390 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
6393 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6396 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
6397 news28|sony vt100 emulator 28 lines,
6400 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
6403 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
6404 news29|news28-a|sony vt100 emulator 29 lines,
6406 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
6409 # (news511: this had :TY=sjis: --esr)
6410 nwp511|nwp-511|nwp-511 vt100,
6411 OTbs, OTpt, am, xenl,
6413 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6414 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
6415 ed=\E[J$<30/>, el=\E[K$<3/>,
6416 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
6417 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
6418 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
6419 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
6420 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6421 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
6422 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6423 # (news517: this had :TY=sjis:. --esr)
6424 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
6427 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6428 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
6429 tsl=\E[1$}\E[;%df, use=vt200,
6430 # (news517-w: this had :TY=sjis:. --esr)
6431 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
6434 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6435 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6436 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6437 tsl=\E[1$}\E[;%df, use=vt200,
6439 #### Common Desktop Environment
6442 # This ships with Sun's CDE in Solaris 2.5
6443 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
6444 dtterm|CDE desktop terminal,
6445 am, mir, msgr, xenl, xon,
6446 cols#80, it#8, lines#24, lm#0, ncv@,
6447 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6448 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6449 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
6450 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6451 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6452 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6453 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6454 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6455 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
6456 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6457 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
6458 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6459 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6460 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6461 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6462 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
6463 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6464 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6465 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6466 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
6468 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6469 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6470 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
6472 ######## Non-Unix Consoles
6475 #### EMX termcap.dat compatibility modes
6477 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
6478 # no_color_video to inform the application that standout(1), underline(2)
6479 # reverse(4) and invisible(64) don't work with color.
6480 emx-base|DOS special keys,
6483 bel=^G, use=ansi.sys,
6485 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
6486 # a Unix-style environment used on OS/2. (Note that the suffix makes some
6487 # names longer than 14 characters, the nominal maximum).
6489 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
6490 ansi-emx|ANSI.SYS color,
6491 am, bce, eo, mir, msgr, xon,
6492 colors#8, cols#80, it#8, lines#25, pairs#64,
6493 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6494 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
6495 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6496 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
6497 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
6498 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
6499 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
6500 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
6501 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6502 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
6503 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
6504 u9=\E[c, use=emx-base,
6505 # nice colors for Emacs (white on blue, mode line white on cyan)
6506 ansi-color-2-emx|ANSI.SYS color 2,
6507 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
6508 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
6509 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
6510 smul=\E[1;36;44m, use=ansi-emx,
6511 # nice colors for Emacs (white on black, mode line black on cyan)
6512 ansi-color-3-emx|ANSI.SYS color 3,
6513 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
6514 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
6515 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
6516 smul=\E[0;36;40m, use=ansi-emx,
6517 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
6519 cols#80, it#8, lines#24,
6520 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6521 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6522 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
6523 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
6524 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
6525 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
6530 # Use this for cygwin32 (tested with beta 19.1)
6531 # underline is colored bright magenta
6532 # shifted kf1-kf12 are kf11-kf22
6533 cygwinB19|ansi emulation for cygwin32,
6534 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6535 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6536 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6537 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6538 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6539 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6540 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
6543 # Use this for cygwin (tested with version 1.1.0).
6544 # I've combined pcansi and linux. Some values of course were different and
6545 # I've indicated which of these were and which I used.
6546 # Cheers, earnie_boyd@yahoo.com
6547 # several changes based on running with tack and comparing with older entry -TD
6548 # more changes from csw:
6550 # remove eo [erase overstrike with blank]
6551 # change clear was \E[H\E[J now \E[2J (faster?)
6554 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
6556 # add cub [cursor back param]
6557 # add cuf [cursor forward param]
6558 # add cuu [cursor up param]
6559 # add cud [cursor down param]
6560 # add hs [has status line]
6561 # add fsl [return from status line]
6562 # add tsl [go to status line]
6563 # add smacs [Start alt charset] (not sure if this works)
6564 # add rmacs [End alt charset] (ditto)
6565 # add smcup [enter_ca_mode] (save console; thanks Corinna)
6566 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
6567 # add kb2 [center of keypad]
6568 # add u8 [user string 8] \E[?6c
6569 # add el [clear to end of line] \E[K
6571 # cnorm [make cursor normal] not implemented
6572 # flash [flash] not implemented
6573 # blink [blink] not implemented very usefully in cygwin? \E[5m
6574 # dim [dim] not implemented very usefully in cygwin? \E[2m
6575 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
6576 # kNXT [shifted next key] not implemented
6577 # kPRV [shifted prev key] not implemented
6578 # khome [home key] really is \E[1~ NOT \E[H
6579 # tbc [clear tab stops] not implemented
6580 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
6581 # smpch [Start PC charset] is \E[11m, same as smacs
6582 # rmpch [End PC charset] is \E[10m, same as rmacs
6583 # mir [move in insert mode] fails in tack?
6584 # bce [back color erase] causes problems with change background color?
6585 # cvvis [make cursor very visible] causes a stackdump when testing with
6586 # testcurs using the output option? \E[?25h\E[?8c
6587 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
6588 # ech [erase characters param] broken \E[%p1%dX
6589 # kcbt [back-tab key] not implemented in cygwin? \E[Z
6592 # Remove cbt since it does not work in current cygwin
6593 # Add 'mir' and 'in' flags based on tack
6594 cygwin|ansi emulation for Cygwin,
6595 am, hs, mir, msgr, xon,
6596 colors#8, it#8, pairs#64,
6597 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6598 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
6599 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6600 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6601 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6602 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
6603 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
6604 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
6605 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6606 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6607 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6608 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6609 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6610 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6611 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
6612 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6613 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
6614 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
6615 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6616 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6617 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
6618 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
6619 vpa=\E[%i%p1%dd, use=vt102+enq,
6621 # I've supplied this so that you can help test new values and add other
6622 # features. Cheers, earnie_boyd@yahoo.com.
6624 # Some features are from pcansi. The op value is from linux. Function-keys
6625 # are from linux. These have been tested not to cause problems. xenl was in
6626 # this list, but DOES cause problems so it has been removed
6627 cygwinDBG|Debug Version for Cygwin,
6628 am, eo, mir, msgr, xon,
6629 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6630 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6631 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6632 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
6633 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6634 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6635 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6636 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6637 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
6638 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6639 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
6640 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6641 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
6642 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6643 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6644 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
6645 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6646 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6647 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
6648 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
6649 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6650 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6651 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
6652 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
6653 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
6658 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
6659 # encodings used by other x86 environments. All others are invented for DJGPP.
6660 # Oddly enough, while several combinations of modifiers are tabulated, there is
6661 # none for shifted cursor keys.
6713 # Ctrl-Delete \E[43~
6714 # Ctrl-Down Arrow \E[38~
6717 # Ctrl-Insert \E[42~
6718 # Ctrl-Left Arrow \E[39~
6719 # Ctrl-Page Down \E[46~
6720 # Ctrl-Page Up \E[45~
6721 # Ctrl-Right Arrow \E[40~
6722 # Ctrl-Up Arrow \E[37~
6738 # Alt-Down Arrow \E[60~
6742 # Alt-Left Arrow \E[61~
6743 # Alt-Page Down \E[68~
6744 # Alt-Page Up \E[67~
6745 # Alt-Right Arrow \E[62~
6746 # Alt-Up Arrow \E[59~
6775 djgpp|ansi emulation for DJGPP alpha,
6776 am, bce, msgr, xhp, xon, xt,
6777 colors#8, it#8, pairs#64,
6778 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6779 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6780 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
6781 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6782 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6783 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6784 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6785 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6786 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6787 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
6788 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6789 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
6790 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6791 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6792 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
6793 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
6794 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6795 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
6796 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6798 djgpp203|Entry for DJGPP 2.03,
6800 cols#80, it#8, lines#25,
6801 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
6804 djgpp204|Entry for DJGPP 2.04,
6806 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
6807 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6808 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
6809 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6810 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6811 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
6812 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6813 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6814 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
6815 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6816 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
6817 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6818 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6819 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
6820 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6821 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6825 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6826 # buggy. Another odd bug appears when displaying "~" in alternate character
6827 # set (the emulator spits out error messages). Compare with att6386 -TD
6828 uwin|U/Win 3.2 console,
6829 am, eo, in, msgr, xenl, xon,
6830 colors#8, it#8, ncv#58, pairs#64,
6831 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6832 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6833 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6834 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6835 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6836 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6837 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6838 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6839 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6840 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6841 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6842 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6843 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6844 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6845 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6846 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6848 #### Microsoft (miscellaneous)
6850 # This entry fits the Windows NT console when the _POSIX_TERM environment
6851 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6852 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6853 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6854 # systems is not, and (surprise!) they match very well.
6856 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6857 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6858 # are the installation instructions a pile of mind-numbing bureaucratese,
6859 # but the termcap entry is actually broken and unusable as given; the :do:
6860 # capability is misspelled "d".
6862 # To use this, you need to a bunch of environment variables:
6864 # SET _POSIX_TERM=on
6866 # SET TERMCAP=location of termcap file in POSIX file format
6867 # which is case-sensitive.
6868 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6871 # Important note: setting the TMP environment variable in POSIX style renders
6872 # it incompatible with a lot of other applications, including Visual C++. So
6873 # you should have a separate command window just for vi. All the other
6874 # variables may be permanently set in the Control Panel\System applet.
6876 # You can find out more about the restrictions of this facility at
6877 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6879 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6880 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6882 cols#80, it#8, lines#25,
6883 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6884 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6885 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6886 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6887 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6888 # From: jew@venus.sunquest.com
6889 # Date: 19 Feb 93 23:41:07 GMT
6890 # Here's a combination of ansi and vt100 termcap
6891 # entries that works nearly perfectly for me
6892 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6893 pcmw|PC running Microsoft Works,
6895 cols#80, it#8, lines#24, vt#3,
6896 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6897 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6898 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6899 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6900 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6901 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6902 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6903 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6904 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6905 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6906 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6909 # From: Federico Bianchi
6910 # This is the entry for the OpenNT terminal.
6911 # The ntconsole name is for backward compatability.
6912 # This is for OpenNT 2.0 and later.
6913 # Later OpenNT was renamed to Interix.
6915 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6916 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6917 # the documentation dates from 1.9.9e) -TD
6919 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6921 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6922 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6923 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6924 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6925 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6926 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6927 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6928 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6929 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6930 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6931 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6932 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6933 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6934 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6935 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6936 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6937 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6938 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6939 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6940 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6941 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6942 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6943 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6944 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6945 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6946 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6947 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6948 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6950 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6951 lines#35, use=opennt,
6953 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6954 lines#50, use=opennt,
6956 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6957 lines#60, use=opennt,
6959 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6960 lines#100, use=opennt,
6962 # OpenNT wide terminals
6963 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6964 cols#125, use=opennt,
6966 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6967 lines#35, use=opennt-w,
6969 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6970 lines#50, use=opennt-w,
6972 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6973 lines#60, use=opennt-w,
6975 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6976 cols#132, use=opennt,
6978 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6979 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6980 rmcup@, smcup@, use=opennt,
6982 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6983 lines#35, use=opennt-nti,
6985 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6986 lines#50, use=opennt-nti,
6988 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6989 lines#60, use=opennt-nti,
6991 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6992 lines#100, use=opennt-nti,
6994 ######## COMMON TERMINAL TYPES
6996 # This section describes terminal classes and maker brands that are still
6997 # quite common, but have proprietary command sets not blessed by ANSI.
7002 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7003 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7004 # Acer has a web site at http://www.acer.com.
7006 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7007 # His comments suggest they were shipped with the system.
7010 # (altos2: had extension capabilities
7011 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7012 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7013 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7014 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7015 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7016 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7017 # :HL=^AP\r:SP=\E[i:\
7018 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7019 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7020 # Comparison with the k* capabilities makes it obvious that the c* things are
7021 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7022 # :sr: was given as a boolean-- esr)
7023 altos2|alt2|altos-2|altos II,
7024 cols#80, it#8, lines#24, xmc#0,
7025 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7026 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7027 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7028 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
7029 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7030 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7031 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7032 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7033 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7034 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7035 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7036 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7037 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7038 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7039 # (altos3: had extension capabilities
7040 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7041 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7042 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7043 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7044 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7045 # :HL=^AP\r:SP=\E[i:\
7046 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7047 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7048 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7049 altos4|alt4|altos-4|altos IV,
7051 # (altos7: had extension capabilities:
7052 # :GG#0:GI=\EH8:GF=\EH7:\
7053 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7054 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7055 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7056 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7057 # Comparison with the k* capabilities makes it obvious that the c* things are
7058 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7059 # also made this entry relative to adm12 in order to give it an <sgr>. The
7060 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7061 altos7|alt7|altos VII,
7063 cols#80, lines#24, xmc#0,
7064 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7065 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7066 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7067 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7069 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7070 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7071 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7072 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7073 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7074 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7075 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7076 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7077 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
7078 rmir=\Er, smir=\Eq, use=adm+sgr,
7079 altos7pc|alt7pc|altos PC VII,
7080 kend=\ET, use=altos7,
7082 #### Hewlett-Packard (hp)
7085 # 8000 Foothills Blvd
7086 # Roseville, CA 95747
7087 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7088 # 1-(800)-633-3600 (General customer support)
7091 # As of March 1998, HP no longer has any terminals in production.
7092 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7093 # supported (they still have parts). So are the 2392a and 2394a.
7094 # See the WORKSTATION CONSOLES section for the 700s.
7097 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7098 hpgeneric|hp|hewlett-packard generic terminal,
7099 OTbs, OTpt, am, da, db, mir, xhp,
7100 cols#80, lines#24, lm#0, vt#6,
7101 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7102 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7103 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7104 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7105 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7108 hp110|hewlett-packard model 110 portable,
7109 lines#16, use=hpgeneric,
7111 hp+pfk+cr|hp function keys with CR,
7112 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7113 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7115 hp+pfk-cr|hp function keys w/o CR,
7116 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7119 # The hp2621s use the same keys for the arrows and function keys,
7120 # but not separate escape sequences. These definitions allow the
7121 # user to use those keys as arrow keys rather than as function
7123 hp+pfk+arrows|hp alternate arrow definitions,
7124 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7125 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7126 kll=\Eq\r, kri=\Es\r,
7128 hp+arrows|hp arrow definitions,
7129 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7130 kind=\ES, kll=\EF, kri=\ET,
7132 # Generic stuff from the HP 262x series
7134 hp262x|HP 262x terminals,
7136 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7137 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7138 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7139 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7140 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7141 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
7142 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7144 # Note: no <home> on HPs since that homes to top of memory, not screen.
7145 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7146 # transmit anything at all is to turn on the function key labels
7147 # with <smkx>, and even then the user has to hold down shift!
7148 # The default 2621 turns off the labels except when it has to to
7149 # enable the function keys. If your installation prefers labels
7150 # on all the time, or off all the time (at the "expense" of the
7151 # function keys), use 2621-nl or 2621-wl.
7153 # Note: there are newer ROMs for 2621's that allow you to set
7154 # strap A so the regular arrow keys xmit \EA, etc, as with the
7155 # 2645. However, even with this strap set, the terminal stops
7156 # xmitting if you reset it, until you unset and reset the strap!
7157 # Since there is no way to set/unset the strap with an escape
7158 # sequence, we don't use it in the default.
7159 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7160 hp2621-ba|2621 w/new rom and strap A set,
7161 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7163 # hp2621 with function labels. Most of the time they are off,
7164 # but inside vi, the function key labels appear. You have to
7165 # hold down shift to get them to xmit.
7166 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7167 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7171 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7172 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7173 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7174 use=hp+pfk+cr, use=hpgeneric,
7176 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7177 hp2621p|hp 2621 with printer,
7178 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7180 hp2621p-a|hp2621p with fn as arrows,
7181 use=hp+pfk+arrows, use=hp2621p,
7183 # hp2621 with k45 keyboard
7184 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7185 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7186 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7188 # 2621 using all 48 lines of memory, only 24 visible at any time.
7189 hp2621-48|48 line 2621,
7191 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7194 # 2621 with no labels ever. Also prevents vi delays on escape.
7195 hp2621-nl|hp 2621 with no labels,
7196 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7199 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7202 hp2621-nt|hp 2621 w/no tabs,
7205 # Hp 2624 B with 4 or 10 pages of memory.
7207 # Some assumptions are made with this entry. These settings are
7208 # NOT set up by the initialization strings.
7210 # Port Configuration
7215 # Terminal Configuration
7221 # Note: the 2624 DOES have a true <home>, believe it or not!
7223 # The 2624 has an "error line" to which messages can be sent.
7224 # This is CLOSE to what is expected for a "status line". However,
7225 # after a message is sent to the "error line", the next carriage
7226 # return is EATEN and the "error line" is turned back off again!
7227 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7229 # This entry supports emacs (and any other program that uses raw
7230 # mode) at 4800 baud and less. I couldn't get the padding right
7233 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7234 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7237 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
7238 use=hp+labels, use=scrhp,
7240 # This hp2626 entry does not use any of the fancy windowing stuff
7243 # Indeed, terminfo does not yet handle such stuff. Since changing
7244 # any window clears memory, it is probably not possible to use
7245 # this for screen opt.
7247 # ed is incredibly slow most of the time - I am guessing at the
7248 # exact padding. Since the terminal uses xoff/xon this is intended
7249 # only for cost computation, so that the terminal will prefer el
7250 # or even dl1 which is probably faster!
7252 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7253 # extra slow on the last line of the window.
7255 # The padding probably should be changed.
7257 hp2626|hp2626a|hp2626p|hp 2626,
7260 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7261 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7262 use=hp+labels, use=scrhp,
7264 # This entry is for sysline. It allocates a 23 line window with
7265 # a 115 line workspace for regular use, and a 1 line window for
7268 # This assumes port 2 is being used.
7269 # Turn off horizontal line, Create ws #1 with 115 lines,
7270 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7271 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7272 # Note that this clears the tabs so it must be done by tset before
7275 hp2626-s|hp 2626 using only 23 lines,
7278 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7279 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
7280 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7281 # Force terminal back to 24 lines after being 23.
7282 hp2626-ns|hp 2626 using all 24 lines,
7283 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
7285 # Various entries useful for small windows on 2626.
7286 hp2626-12|hewlett-packard 2626 12 lines,
7287 lines#12, use=hp2626,
7288 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7289 cols#40, lines#12, use=hp2626,
7290 hp2626-x40|hewlett-packard 2626 40 columns,
7291 cols#40, use=hp2626,
7292 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7293 lines#11, use=hp2626-s,
7296 # hp2627 color tubes from University of Wisconsin
7298 hp2627a-rev|hp 2627 with reverse video colors,
7299 cr=^M, cud1=^J, ht=^I, ind=^J,
7300 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
7301 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
7302 smul=\E&dD\E&v1S, use=hp2621-nl,
7303 hp2627a|hp 2627 color terminal with no labels,
7304 cr=^M, cud1=^J, ht=^I, ind=^J,
7305 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7306 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
7307 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7309 hp2627c|hp 2627 color (cyan) terminal with no labels,
7310 cr=^M, cud1=^J, ht=^I, ind=^J,
7311 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7312 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
7314 # hp2640a doesn't have the Y cursor addressing feature, and C is
7315 # memory relative instead of screen relative, as we need.
7318 cup@, rmkx@, smkx@, use=hp2645,
7320 hp2640b|hp2644a|hp 264x series,
7321 rmkx@, smkx@, use=hp2645,
7323 # (hp2641a: removed unknown :gu: -- esr)
7324 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7325 am, da, db, mir, xhp,
7327 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7328 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7329 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7330 if=/usr/share/tabset/std, il1=\EL, ind=^J,
7331 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7332 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7335 # This terminal should be used at 4800 baud or less. It needs padding for
7336 # plain characters at 9600, I guessed at an appropriate cr delay. It really
7337 # wants ^E/^F handshaking, but that doesn't work well even if you write
7338 # software to support it.
7339 hp2645|hp45|HP 2645 series,
7341 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
7342 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7343 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
7344 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
7346 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
7347 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
7348 # You should use this terminal at 4800 baud or less.
7349 hp2648|hp2648a|HP 2648a graphics terminal,
7350 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
7351 dch1=\EP$<7>, ip=$<5>, use=hp2645,
7353 # The HP 150 terminal is a fairly vanilla HP terminal, with the
7354 # clreol standout problem. It also has graphics capabilities and
7355 # a touch screen, which we don't describe here.
7356 hp150|hewlett packard Model 150,
7359 # HP 2382a terminals, "the little ones." They don't have any
7360 # alternate character set support and sending out ^N/^O will
7361 # leave the screen blank.
7362 hp2382a|hp2382|hewlett packard 2382a,
7366 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7368 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
7369 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
7371 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
7372 use=hp+pfk+arrows, use=hp2621-fl,
7374 # newer hewlett packard terminals
7376 newhpkeyboard|generic entry for HP extended keyboard,
7377 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7378 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7379 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
7380 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
7383 newhp|generic entry for new hewlett packard terminals,
7384 am, bw, mir, xhp, xon,
7385 cols#80, lines#24, pb#4800,
7386 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
7387 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
7388 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
7389 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
7390 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
7391 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
7392 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
7393 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
7394 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
7395 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
7396 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
7397 tbc=\E3, use=newhpkeyboard,
7399 memhp|memory relative addressing for new HP ttys,
7401 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
7402 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
7403 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
7404 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
7406 scrhp|screen relative addressing for new HP ttys,
7407 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
7408 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
7409 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
7410 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
7411 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
7413 # (hp+labels: added label values from a BRL termcap -- esr)
7414 hp+labels|"standard" label info for new HP ttys,
7416 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
7417 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7418 rmln=\E&j@, smln=\E&jB,
7420 hp+printer|"standard" printer info for HP ttys,
7421 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
7424 # The new hp2621b is kind of a cross between the old 2621 and the
7425 # new 262x series of machines. It has dip-switched options.
7426 # The firmware has a bug in it such that if you give it a null
7427 # length label, the following character is eaten!
7428 hp2621b|hp 2621b with old style keyboard,
7429 lh#1, lm#48, lw#8, nlab#8,
7430 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7431 kind=\ET, kll=\EF, kri=\ES,
7432 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
7433 smln=\E&jB, use=hp2621,
7435 hp2621b-p|hp 2621b with printer,
7436 use=hp+printer, use=hp2621b,
7438 # hp2621b - new 2621b with new extended keyboard
7439 # these are closer to the new 26xx series than the other 2621b
7440 hp2621b-kx|hp 2621b with extended keyboard,
7441 use=newhpkeyboard, use=hp2621b,
7443 hp2621b-kx-p|hp 2621b with new keyboard & printer,
7444 use=hp+printer, use=hp2621b-kx,
7446 # Some assumptions are made in the following entries.
7447 # These settings are NOT set up by the initialization strings.
7449 # Port Configuration
7450 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
7452 # Terminal Configuration
7453 # InhHndShk(G)=Yes InhDC2(H)=Yes
7454 # XmitFnctn(A)=No InhEolWrp=No
7457 # Hp 2622a & hp2623a display and graphics terminals
7459 hp2622|hp2622a|hp 2622,
7462 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
7464 # The 2623 is a 2622 with extra graphics hardware.
7465 hp2623|hp2623a|hp 2623,
7468 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
7469 use=hp+printer, use=hp2624,
7471 # The hewlett packard B can have an optional extra 6 pages of memory.
7472 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
7475 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
7476 lm#240, use=hp2624b-p,
7478 # Color manipulations for HP terminals
7479 hp+color|hp with colors,
7481 colors#16, ncv#17, pairs#7,
7482 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
7483 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
7484 op=\E&v0S, scp=\E&v%p1%dS,
7486 # <is2> sets the screen to be 80 columns wide
7487 hp2397a|hp2397|hewlett packard 2397A color terminal,
7488 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
7490 # HP 700/44 Setup parameters:
7491 # Terminal Mode HP-PCterm
7492 # Inhibit Auto Wrap NO
7493 # Status Line Host Writable
7494 # PC Character Set YES
7495 # Twenty-Five Line Mode YES
7496 # XON/XOFF @128 or 64 (sc)
7497 # Keycode Mode NO or YES (sc)
7498 # Backspace Key BS or BS/DEL
7500 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
7501 # \E\\? does not turn off keycode mode
7502 # <smsc> sets alternate start/stop; keycode on
7503 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
7506 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
7507 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
7508 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7509 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7510 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
7512 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
7513 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7514 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
7515 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
7516 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
7517 kpp=\E[5~, rmam=\E[?7l,
7518 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
7519 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
7520 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
7521 smul=\E[4m, xoffc=g, xonc=e,
7523 # (hp2392: copied <rmir> here from hpex -- esr)
7526 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
7527 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
7528 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
7529 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
7532 hpsub|hp terminals -- capability subset,
7533 am, da, db, mir, xhp, xon,
7535 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7536 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
7537 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
7538 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
7539 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
7540 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
7543 # May be used for most 24 x 80 hp terminals,
7544 # but has no padding added, so may allow runover in some terminals at high
7545 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
7546 # hp98x5 terminal emulators or hp98x6 consoles.
7547 # Adds xy-cursor addressing, vertical cursor addressing, home,
7548 # last line, and underline capabilities.
7550 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
7551 # moved <rmir> here from hpsub -- esr)
7552 hpex|hp extended capabilites,
7553 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
7554 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
7555 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
7557 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
7558 hp2|hpex2|hewlett-packard extended capabilities newer version,
7559 am, da, db, mir, xhp,
7560 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
7561 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7562 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7563 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7564 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7565 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7566 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7567 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7568 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7569 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
7570 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7571 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7572 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7573 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
7574 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7575 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
7576 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
7577 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7580 # From: <ddavis@ic.berkeley.edu>
7581 hp236|hp236 internal terminal emulator,
7584 clear=\EF, cnorm=\EDE, cub1=^H,
7585 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
7586 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
7587 sgr0=\ECI, smso=\EBI,
7589 # This works on a hp300 console running Utah 4.3 BSD
7590 # From: Craig Leres <leres@okeeffe.berkeley.edu>
7591 hp300h|HP Catseye console,
7592 OTbs, am, da, db, mir, xhp,
7593 cols#128, lines#51, lm#0, xmc#0,
7594 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7595 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7596 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7597 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
7598 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7599 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
7600 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
7602 # From: Greg Couch <gregc@ernie.berkeley.edu>
7603 hp9837|hp98720|hp98721|HP 9000/300 workstations,
7604 OTbs, am, da, db, mir, xhp,
7605 cols#128, it#8, lines#46, lm#0,
7606 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
7607 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7608 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7609 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
7610 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7611 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
7612 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
7613 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
7614 tbc=\E3, vpa=\E&a%p1%dY,
7615 # HP 9845 desktop computer from BRL
7616 # (hp9845: removed unknown capability :gu: -- esr)
7618 OTbs, am, da, db, eo, mir, xhp,
7620 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7621 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7622 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
7623 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7624 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
7625 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
7626 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
7627 hp98550|hp98550a|HP 9000 Series 300 color console,
7628 OTbs, am, da, db, mir, xhp,
7629 cols#128, it#8, lines#49, lm#0,
7630 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
7631 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7632 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
7633 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7634 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
7635 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7636 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
7637 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
7638 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
7639 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
7640 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7641 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
7642 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7643 # From: Victor Duchovni <vic@fine.princeton.edu>
7644 # (hp700-wy: removed obsolete ":nl=^J:";
7645 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
7646 hp700-wy|HP700/41 emulating wyse30,
7647 OTbs, am, bw, mir, msgr,
7648 cols#80, it#8, lines#24, xmc#1,
7649 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7650 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7651 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
7652 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
7653 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
7654 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
7655 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
7656 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
7657 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
7658 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
7659 hp70092|hp70092a|hp70092A|HP 700/92,
7661 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
7662 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
7663 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
7664 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
7665 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7666 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7667 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7668 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7669 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7670 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7671 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
7672 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7673 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
7674 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7676 bobcat|sbobcat|HP 9000 model 300 console,
7677 am, da, db, mir, xhp,
7678 cols#128, it#8, lines#47, xmc#0,
7679 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7680 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
7681 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
7682 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7683 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
7684 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
7685 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
7686 gator-t|HP 9000 model 237 emulating extra-tall AAA,
7687 lines#94, use=gator,
7688 gator|HP 9000 model 237 emulating AAA,
7690 cols#128, it#8, lines#47,
7691 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
7692 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
7693 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
7694 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
7695 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
7696 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7697 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
7698 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7699 gator-52|HP 9000 model 237 emulating VT52,
7700 cols#128, lines#47, use=vt52,
7701 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
7702 lines#94, use=gator-52,
7706 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
7709 # Honeywell Bull terminal. Its cursor and function keys send single
7710 # control characters and it has standout/underline glitch. Most programs
7711 # do not like these features/bugs. Visual bell is realized by flashing the
7712 # "keyboard locked" LED.
7713 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
7715 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
7716 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
7717 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
7718 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
7719 dku7003|Honeywell Bull DKU 7003 all features described,
7722 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
7723 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7726 #### Lear-Siegler (adm)
7728 # These guys are long since out of the terminals business, but
7729 # in 1995 many current terminals still have an adm type as one of their
7730 # emulations (usually their stupidest, and usually labeled adm3, though
7731 # these `adm3' emulations normally have adm3a+ capabilities).
7733 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
7734 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
7735 # was being held to ground would trigger a send of the top line on the screen.
7736 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
7737 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
7738 # for clearing up this point.)
7740 adm1a|adm1|lsi adm1a,
7743 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7744 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
7749 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7750 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7751 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
7752 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
7753 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
7757 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
7758 # The following ADM-3A switch settings are assumed for normal operation:
7759 # SPACE U/L_DISP CLR_SCRN 24_LINE
7760 # CUR_CTL LC_EN AUTO_NL FDX
7761 # Other switches may be set for operator convenience or communication
7762 # requirements. I recommend
7763 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
7765 # Most of these terminals required an option ROM to support lower case display.
7766 # Open the case and look at the motherboard; if you see an open 24-pin DIP
7767 # socket, you may be out of luck.
7769 # (adm3a: some capabilities merged in from BRl entry -- esr)
7773 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
7774 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7775 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
7779 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
7782 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
7783 rmso=\EG, smso=\EG, use=adm3a+,
7784 # A lot of terminals other than adm11s use these. Wherever you see
7785 # use=adm+sgr with some of its capabilities disabled, try the
7786 # disabled ones. They may well work but not have been documented or
7787 # expressed in the using entry. We'd like to cook up an <sgr> but the
7788 # <rmacs>/<smacs> sequences of the using entries vary too much.
7789 adm+sgr|adm style highlight capabilities,
7790 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
7791 smso=\EG4, smul=\EG8,
7792 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
7793 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
7794 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
7795 # be ^Z, according to his entry.
7796 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
7797 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
7800 OTkn#8, cols#80, lines#24,
7801 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
7802 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7803 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
7804 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7805 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7806 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
7808 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
7809 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
7810 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
7811 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
7812 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
7813 # via BRL. That entry asserted <xmc#1>, but I've left that out because
7814 # neither earlier nor later ADMSs have it -- esr)
7816 # You will need to get into the supervisor setup before you can set
7817 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
7818 # see a lot more setup options.
7820 # While in supervisor setup you can also use following codes:
7822 # Ctrl-P Personality character selections (configure for example what
7823 # arrow keys send, if I recall correctly)
7824 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7825 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7826 # Ctrl-B Binary setup (probably not needed. I think that everything can
7827 # be set using normal setup)
7828 # Ctrl-A Answerback mode (enter answerback message)
7829 # Ctrl-U User friendly mode (normal setup)
7830 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7831 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7832 # Ctrl-R Reads both setup and functions keys from NVM.
7833 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7835 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7836 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7837 # bps works fine with hardware flow control.
7839 # The following null-modem cable should fix this and enable you to use
7840 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7841 # set ADM-12+ for DTR handshaking from supervisor setup.
7854 OTbs, OTpt, am, mir,
7855 OTug#1, cols#80, it#8, lines#24,
7856 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7857 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7858 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7859 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7860 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7861 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7862 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7864 # (adm20: removed obsolete ":kn#7:" -- esr)
7865 adm20|lear siegler adm20,
7867 cols#80, it#8, lines#24,
7868 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7869 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7870 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7871 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7873 adm21|lear siegler adm21,
7875 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
7876 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=^J, invis@, kbs=^H,
7877 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
7878 use=adm+sgr, use=adm3a,
7879 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7880 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7881 # removed bogus-looking \200 from before <cup>. -- esr)
7885 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7886 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7887 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7888 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7889 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7890 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7891 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7892 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7893 # ADM 31 DIP Switches
7895 # This information comes from two versions of the manual for the
7896 # Lear-Siegler ADM 31.
7900 # +-||||-------------------------------------+
7915 # +----------------------------------------------+
7916 # front of case (keyboard)
7918 # S1 - Data Rate - Modem
7919 # S2 - Data Rate - Printer
7920 # ------------------------
7922 # -------------------
7940 # S3 - Interface/Printer/Attributes
7941 # ---------------------------------
7942 # Printer Busy Control
7945 # off off off Busy not active, CD disabled
7946 # off off on Busy not active, CD enabled
7947 # off on off Busy active on J5-20, CD disabled
7948 # on off off Busy active on J5-19, CD disabled - Factory Set.
7949 # on off on Busy active on J5-19, CD enabled
7951 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7953 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7955 # sw6 ON enables printer BUSY active LOW - Factory Setting
7956 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7958 # sw7 ON - steady cursor - Factory Setting
7959 # OFF - blinking cursor
7961 # sw8 ON causes selected attribute character to be displayed
7962 # OFF causes SPACE to be displayed instead - Factory Setting
7968 # sw4 sw1 sw2 sw3 sw4
7969 # ---------------------------
7970 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7971 # Current Loop disabled - Factory Setting
7972 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7974 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7975 # Current Loop Disabled
7977 # sw5 ON disables dot stretching mode - Factory Setting
7978 # OFF enables dot stretching mode
7979 # sw6 ON enables blanking function
7980 # OFF enables underline function - Factory Setting
7981 # sw7 ON causes NULLS to be displayed as NULLS
7982 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7984 # S5 - Word Structure
7985 # -------------------
7986 # sw1 ON enables BREAK key - Factory Setting
7987 # OFF disables BREAK key
7988 # sw2 ON selects 50Hz monitor refresh rate
7989 # OFF selects 60Hz monitor refresh rate - Factory Setting
7991 # Modem Port Selection
7994 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
7995 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
7996 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7997 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
7998 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
7999 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8000 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8001 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8003 # sw6 ON sends bit 8 a 1 (mark)
8004 # OFF sends bit 8 as 0 (space) - Factory Setting
8005 # sw7 ON selects Block Mode
8006 # OFF selects Conversation Mode - Factory Setting
8007 # sw8 ON selects Full Duplex operation
8008 # OFF selects Half Duplex operation - Factory Setting
8012 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8014 # Printer Port Selection
8015 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8017 # sw8 ON enables Printer Port
8018 # OFF disables Printer Port - Factory Setting
8020 # S7 - Polling Address
8021 # --------------------
8022 # sw1-7 Establish ASCII character which designates terminal polling address
8024 # OFF = logic 1 - Factory Setting
8025 # sw8 ON enables Polling Option
8026 # OFF disables Polling Option - Factory Setting
8029 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8031 # This adm31 entry uses underline as the standout mode.
8032 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8033 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8034 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8035 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8036 adm31|lsi adm31 with sw6 set for underline mode,
8039 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8040 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8041 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
8042 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8043 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8044 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8045 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8046 adm31-old|o31|old adm31,
8047 rmul@, smso=\EG4, smul@, use=adm31,
8048 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8052 if=/usr/share/tabset/vt100,
8053 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
8055 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8059 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8060 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8061 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8062 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
8063 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
8064 smir=\Eq, smul@, use=adm+sgr,
8065 # The following termcap for the Lear Siegler ADM-42 leaves the
8066 # "system line" at the bottom of the screen blank (for those who
8067 # find it distracting otherwise)
8068 adm42-ns|lsi adm-42 with no system line,
8069 cbt=\EI\EF \011, clear=\E;\EF \011,
8070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8071 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8072 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8073 smir=\Eq\EF \011, use=adm42,
8074 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8075 # The insert mode of this terminal is commented out because it's broken for our
8076 # purposes in that it will shift the position of every character on the page,
8077 # not just the cursor line!
8078 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8079 adm1178|1178|lsi adm1178,
8081 cols#80, lines#24, xmc#1,
8082 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
8083 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8084 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8085 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
8086 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
8087 sgr0=\E), smso=\EG4, smul=\EG1,
8091 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8092 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8093 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8095 # ComputerVision Services
8096 # 500 Old Connecticut Path
8100 # Standout mode is dim reverse-video.
8101 pt100|pt200|wren|fenix|prime pt100/pt200,
8103 cols#80, it#8, lines#24,
8104 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
8105 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8106 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8107 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8108 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8109 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
8110 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
8111 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8113 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
8114 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8115 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8117 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8119 rmso@, smso@, use=pt100,
8120 pt250w|Prime PT250 in 132-column mode,
8121 rmso@, smso@, use=pt100w,
8126 # 3475-A North 1st Street
8128 # Vox: (800)-457-4447
8129 # Fax: (408)-473-1510
8130 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8132 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8133 # group and production division.
8135 # Discontinued Qume models:
8137 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8138 # built to replace them, and a qvt119+ which was a 101+ with available wide
8139 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8140 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8141 # ANSI-compatible terminals with the qvt323 and qvt61.
8143 # Current Qume models (as of February 1995):
8145 # All current Qume terminals have ANSI-compatible operation modes.
8146 # Qume is still producing the qvt62, which features emulations for other
8147 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8148 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8149 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8150 # model is the qvt520, which is vt420-compatible.
8152 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8154 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8155 # setup mode. Shift-s should be a configuration save to NVRAM.
8157 qvt101|qvt108|qume qvt 101 and QVT 108,
8160 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8161 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8162 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8163 # What seems to be going on here is that this entry was designed so that
8164 # the normal highlight is bold and standout is dim plus something else
8165 # (reverse-video maybe? But then, are there two <rev> sequences?)
8167 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8168 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8169 qvt101+|qvt101p|qume qvt 101 PLUS product,
8171 cols#80, lines#24, xmc#0,
8172 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
8173 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8174 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8175 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8176 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8177 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8178 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8179 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8180 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8181 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8182 qvt102|qume qvt 102,
8183 cnorm=\E., use=qvt101,
8184 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8185 qvt103|qume qvt 103,
8187 cols#80, it#8, lines#24, vt#3,
8188 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8189 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
8190 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8191 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8192 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8193 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8194 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8195 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8196 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8197 rmso=\E[m$<2>, rmul=\E[m$<2>,
8198 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8199 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
8200 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8201 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8202 qvt103-w|qume qvt103 132 cols,
8204 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8205 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8207 cols#80, lines#24, xmc#0,
8208 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
8209 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8210 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8211 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
8212 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
8213 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8214 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8215 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8216 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8217 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8218 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8219 lines#25, use=qvt119+,
8220 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8222 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8223 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8224 lines#25, use=qvt119+,
8225 qvt203|qvt203+|qume qvt 203 Plus,
8226 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8227 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8228 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8229 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8230 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8232 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8234 # Since a command is present for enabling 25 data lines,
8235 # a specific terminfo entry may be generated for the 203.
8236 # If one is desired for the QVT 119 PLUS then 25 lines must
8237 # be selected in the status line (setup line 9).
8239 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8241 is2=\E[=40h\E[?3l, use=qvt203,
8242 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8244 rs2=\E[?3h\E[=40h, use=qvt203,
8246 #### Televideo (tvi)
8249 # 550 East Brokaw Road
8250 # PO Box 49048 95161
8252 # Vox: (408)-954-8333
8253 # Fax: (408)-954-0623
8256 # These require incredible amounts of padding.
8258 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8259 # Televideo terminals are ANSI and PC-ANSI compatible.
8261 tvi803|televideo 803,
8262 clear=\E*$<10>, use=tvi950,
8264 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8265 # Switch settings are:
8286 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8302 # U do CR/LF when CR received
8303 # D do CR when CR received
8325 # S2 6 Cursor down key
8329 # S2 7 Screen colour
8333 # S2 8 DSR status (pin 6)
8337 # S2 9 DCD status (pin 8)
8341 # S2 10 DTR status (pin 20)
8344 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
8345 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
8346 tvi910|televideo model 910,
8348 cols#80, it#8, lines#24, xmc#1,
8349 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8350 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
8351 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
8352 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
8353 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
8354 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8355 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8356 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
8357 # From: Alan R. Rogers <rogers%albany@csnet-relay>
8358 # as subsequently hacked over by someone at SCO
8359 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
8361 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
8364 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
8365 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
8366 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
8367 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
8370 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
8371 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
8372 # D U D D 8O1 D U U U 8E2
8374 # S1 9 Autowrap (U = on, D = off)
8375 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
8376 # S2 1 Mode (U = block, D = conversational)
8377 # S2 2 Duplex (U = half, D = full)
8378 # S2 3 Hertz (U = 50, D = 60)
8379 # S2 4 Edit mode (U = local, D = duplex)
8380 # S2 5 Cursor type (U = underline, D = block)
8381 # S2 6 Cursor down key (U = send ^J, D = send ^V)
8382 # S2 7 Screen colour (U = green on black, D = black on green)
8383 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
8384 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
8385 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
8387 tvi910+|televideo 910+,
8388 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
8389 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
8390 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
8391 ll=\E=7\s, use=tvi910,
8393 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
8394 # <khome> from BRL entry -- esr)
8395 tvi912|tvi914|tvi920|old televideo 912/914/920,
8396 OTbs, OTpt, am, msgr,
8397 cols#80, it#8, lines#24, xmc#1,
8398 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8399 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8400 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
8401 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
8402 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8403 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8404 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8405 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
8407 # We got some new tvi912c terminals that act really weird on the regular
8408 # termcap, so one of our gurus worked this up. Seems that cursor
8409 # addressing is broken.
8410 tvi912cc|tvi912 at cowell college,
8413 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
8414 # From: Benjamin C. W. Sittler
8416 # Someone has put a scanned copy of the manual online at:
8417 # http://vt100.net/televideo/912b-om/
8419 # These terminals were produced ca. 1979, and had a 12" monochrome
8420 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
8421 # ASCII, and were generally similar to adm3a but with attributes
8422 # (including some with magic cookies), fancy half-duplex mode, and
8425 # Some operations reqire truly incredible amounts of padding. The
8426 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
8427 # are so slow as to be nearly unusable.
8429 # There may or may not have been a separate, earlier series of 912/920
8430 # terminals (without the "B" and "C" suffix); I have never seen one,
8431 # and the manual only describes the "B" and "C" series. The 912 and 920
8432 # are quite distinct from the 914 and 924, which were much nicer non-
8433 # magic-cookie terminals similar to the 950.
8435 # This is a new description for the following TeleVideo terminals,
8436 # distinguished chiefly by their keyboards:
8438 # TVI-912B - very odd layout, no function keys (84 keys)
8439 # TVI-920B - typewriter layout, no function keys (103 keys)
8440 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
8441 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
8443 # To choose a setting for the TERM variable, start with the model:
8445 # Model || base name
8446 # ----------||-----------
8447 # TVI-912B || tvi912b
8448 # TVI-912C || tvi912c
8449 # TVI-920B || tvi920b
8450 # TVI-920C || tvi920c
8452 # Then add a suffix from the following table describing installed options
8453 # and how you'd like to use the terminal:
8455 # Use Video | Second | Visual | Magic | Page || feature
8456 # Attributes | Page | Bell | Cookies | Print || suffix
8457 # ------------|--------|--------|---------|-------||---------
8458 # No | No | N/A | N/A | No || -unk
8459 # No | No | N/A | N/A | Yes || -p
8460 # No | Yes | No | N/A | No || -2p-unk
8461 # No | Yes | No | N/A | Yes || -2p-p
8462 # No | Yes | Yes | N/A | No || -vb-unk
8463 # No | Yes | Yes | N/A | Yes || -vb-p
8464 # Yes | No | N/A | No | N/A ||
8465 # Yes | No | N/A | Yes | N/A || -mc
8466 # Yes | Yes | No | No | N/A || -2p
8467 # Yes | Yes | No | Yes | N/A || -2p-mc
8468 # Yes | Yes | Yes | No | N/A || -vb
8469 # Yes | Yes | Yes | Yes | N/A || -vb-mc
8471 # So e.g. a model 920 C with second page memory option, visual bell
8472 # and no magic cookies would be tvi920c-vb; a model 912 B without the
8473 # second page memory option and using magic cookies would be
8478 # At 9600 baud, the terminal is prone to overflow its input buffer
8479 # during complex operations (insert/delete
8480 # character/line/screen/page), and it does not signal this over the
8481 # RS232 cable. The typical symptom of an overrun is that the terminal
8482 # starts beeping, and output becomes garbled.
8484 # The padding delays in this terminfo were derived using tack(1)
8485 # running on a Linux box connected to a TVI-920C with a later-model
8486 # (A49C1-style) ROM running at 9600 baud, so your mileage may
8487 # vary. The numbers below seem to give the terminal enough time so
8488 # that it doesn't overflow its input buffer and start losing
8493 # If you want to use the FUNCT key on a tvi912[bc], use the
8494 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
8495 # the following table (these also work on the 920 series):
8497 # Unshifted Function Keys:
8499 # Key | capname|| Equivalent
8500 # -----|--------||------------
8501 # F1 | <kf1> || FUNCT + @
8502 # F2 | <kf2> || FUNCT + A
8503 # F3 | <kf3> || FUNCT + B
8504 # F4 | <kf4> || FUNCT + C
8505 # F5 | <kf5> || FUNCT + D
8506 # F6 | <kf6> || FUNCT + E
8507 # F7 | <kf7> || FUNCT + F
8508 # F8 | <kf8> || FUNCT + G
8509 # F9 | <kf9> || FUNCT + H
8510 # F10 | <kf10> || FUNCT + I
8511 # F11 | <kf11> || FUNCT + J
8513 # Shifted Function Keys:
8515 # SHIFT + Key | capname|| Equivalent
8516 # -------------|--------||------------
8517 # SHIFT + F1 | <kf12> || FUNCT + `
8518 # SHIFT + F2 | <kf13> || FUNCT + a
8519 # SHIFT + F3 | <kf14> || FUNCT + b
8520 # SHIFT + F4 | <kf15> || FUNCT + c
8521 # SHIFT + F5 | <kf16> || FUNCT + d
8522 # SHIFT + F6 | <kf17> || FUNCT + e
8523 # SHIFT + F7 | <kf18> || FUNCT + f
8524 # SHIFT + F8 | <kf19> || FUNCT + g
8525 # SHIFT + F9 | <kf20> || FUNCT + h
8526 # SHIFT + F10 | <kf21> || FUNCT + i
8527 # SHIFT + F11 | <kf22> || FUNCT + j
8529 # PORTS AND SWITCH SETTINGS
8531 # Here are the switch settings for the TVI-912B/TVI-920B and
8532 # TVI-912C/TVI-920C:
8534 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
8535 # 2: 9600 3: 4800 4: 2400 5: 1200
8536 # 6: 600 7: 300 8: 150 9: 75
8539 # S2 UART/Terminal options:
8541 # 1: Not used Not allowed
8542 # 2: Alternate character set Standard character set
8543 # 3: Full duplex Half duplex
8544 # 4: 50 Hz refresh 60 Hz refresh
8545 # 5: No parity Send parity
8546 # 6: 2 stop bits 1 stop bit
8547 # 7: 8 data bits 7 data bits
8548 # 8: Not used Not allowed on Rev E or lower
8549 # 9: Even parity Odd parity
8550 # 10: Steady cursor Blinking cursor
8551 # (On Rev E or lower, use W25 instead of switch 10.)
8553 # S5 UART/Terminal options:
8555 # 1: P3-6 Not connected DSR received on P3-6
8556 # 2: P3-8 Not connected DCD received on P3-8
8558 # 3 Open, 4 Open: P3-20 Not connected
8559 # 3 Open, 4 Closed: DTR on when terminal is on
8560 # 3 Closed, 4 Open: DTR is connected to RTS
8561 # 3 Closed, 4 Closed: Not allowed
8563 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
8564 # all data transmitted out of the modem port (P3) will also be
8565 # transmitted out of the printer port (P4).
8567 # 6 Open, 7 Open: Not allowed
8568 # 6 Open, 7 Closed: 20ma current loop input
8569 # 6 Closed, 7 Open: RS232 input
8570 # 6 Closed, 7 Closed: Not allowed
8573 # If the jumper is installed, the effect will occur (the next time the terminal
8576 # S4/W31: Enables automatic LF upon receipt of CR from
8577 # remote or keyboard.
8578 # S4/W32: Enables transmission of EOT at the end of Send. If not
8579 # installed, a carriage return is sent.
8580 # S4/W33: Disables automatic carriage return in column 80.
8581 # S4/W34: Selects Page Print Mode as initial condition. If not
8582 # installed, Extension Mode is selected.
8584 # NON-STANDARD CAPABILITIES
8586 # Sending <u9> or <u7> returns a cursor position report in the format
8587 # YX\r, where Y and X are as in <cup>. This format is described in
8588 # <u8> and <u6>, but it's not clear how one should write an
8589 # appropriate scanf string, since we need to subtract %' ' from the
8590 # character after reading it. The <u9> capability is used by tack(1)
8591 # to synchronize during padding tests, and seems to work for that
8594 # This description also includes the obsolete termcap capabilities
8595 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
8597 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
8599 # The FUNCT modifier actually works with every normal key by sending
8600 # ^AX\r, where X is the sequence normally sent by that key. This is a
8601 # sort of meta key not currently describable in terminfo.
8603 # There are quite a few other keys (especially on the 920 models,) but
8604 # they are for the most part only useful in block mode.
8606 # These terminals have lots of forms manipulation features, mainly
8607 # useful in block mode, including "clear X to nulls" (vs. "clear X to
8608 # spaces"; nulls are sentinels for "send X" operations); "send X"
8609 # operations for uploading all or part of the screen; and block-mode
8610 # editing keys (they don't send escape sequences, but manipulate video
8611 # memory directly). Block mode is used for local editing, and protect
8612 # mode (in conjunction with the "write protect" attribute,
8613 # a.k.a. half-intensity outside of protect mode) is used to control
8614 # which parts of the screen are edited/sent/printed (by <mc0>).
8616 # There are at least two major families of ROM, "early" and
8617 # A49B1/A49C1; the major difference seems to be that the latter ROMs
8618 # support a few extra escape sequences for manipulating the off-screen
8619 # memory page, and for sending whole pages back to the host (mainly
8620 # useful in block mode.) The descriptions in this file don't use any
8621 # of those sequences: set cursor position including page (\E-PYX,
8622 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
8623 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
8624 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
8625 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
8626 # are as in <cup>, and some "send page" features mainly useful for
8627 # forms manipulation.
8629 # The keyboard enable (\E") and disable (\E#) sequences are unused,
8630 # except that a terminal reset (<is2>) enables the keyboard.
8632 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
8633 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
8637 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
8638 # sequences (I infer that in some TeleVideo terminal they may invert
8639 # and uninvert the display) so the <flash> sequence given here is a
8640 # cheesy page-flip instead.
8642 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
8643 # tack(1), so it is not included in the descriptions below.
8645 # It's not clear whether auto_left_margin (<bw>) flag should be set
8646 # for these terminals; tack says yes, so it is set here, but this
8647 # differs from other descriptions I've seen.
8649 # Extension print mode (<mc5>) echoes all characters to the printer
8650 # port [in addition to displaying them] except for the page print mode
8651 # sequence (<mc4>); this is a slight violation of the terminfo
8652 # definition for <mc5> but I don't expect it to cause problems. We
8653 # reset to page print mode in <rs1> since it may have been enabled
8656 # The descriptions with plus signs (+) are building blocks.
8658 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
8660 cols#80, it#8, lines#24,
8661 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8662 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
8663 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
8664 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
8665 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
8666 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
8667 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
8668 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
8669 u7=\E?, u8=%c%c\r, u9=\E?,
8671 # This isn't included in the basic capabilities because it is
8672 # typically unusable in combination with the full range of video
8673 # attributes, since the magic cookie attributes turn into ASCII
8674 # control characters, and the half-intensity ("protected") attribute
8675 # converts all affected characters to spaces.
8677 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
8680 # This uses half-intensity mode (<dim>) for standout (<smso>), and
8681 # exposes no other attributes (half-intensity is the only attribute
8682 # that does not generate a magic cookie.)
8684 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
8686 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
8689 # Full magic-cookie attribute support, with half-intensity reverse
8690 # video for standout. Note that we add a space in the <dim> sequence
8691 # to give a consistent magic-cookie count. Also note that <sgr> uses
8692 # backspacing (in the TVI-supported order) to apply all requested
8693 # attributes with only a single magic cookie.
8695 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
8697 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
8699 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
8700 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
8702 # This uses the second page memory option to save & restore screen
8703 # contents. If your terminal is missing the option, this description
8704 # should still work, but that has not been tested.
8706 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
8707 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
8708 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
8710 # This simulates flashing by briefly toggling to the other page
8713 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
8714 bel=\EK$<100>\EK, use=tvi912b+2p,
8716 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
8718 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
8719 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
8720 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
8721 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
8722 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8723 kf8=^AG\r, kf9=^AH\r,
8725 # Combinations of the basic building blocks
8727 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
8728 use=tvi912b+2p, use=tvi912b-unk,
8730 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
8731 use=tvi912b+vb, use=tvi912b-unk,
8733 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
8734 use=tvi912b+printer, use=tvi912b-unk,
8736 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
8737 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
8739 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
8740 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
8742 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
8743 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
8745 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
8746 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
8748 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
8749 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
8751 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
8752 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
8754 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
8755 use=tvi912b+dim, use=tvi912b-unk,
8757 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
8758 use=tvi912b+mc, use=tvi912b-unk,
8760 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
8761 use=tvi920b+fn, use=tvi912b-unk,
8763 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
8764 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
8766 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
8767 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
8769 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
8770 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
8772 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
8773 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
8776 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
8777 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
8780 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
8781 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
8784 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
8785 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
8788 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
8789 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
8792 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
8793 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
8796 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
8797 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
8799 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
8800 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
8802 # Televideo 921 and variants
8803 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
8804 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
8805 # also added empty <acsc> to suppress tic warning -- esr)
8806 tvi921|televideo model 921 with sysline same as page & real vi function,
8807 OTbs, OTpt, am, hs, xenl, xhp,
8808 cols#80, lines#24, xmc#0,
8809 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8810 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8811 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8812 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
8813 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
8814 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
8815 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
8816 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
8817 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
8818 # without the beeper
8819 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
8820 # also added empty <acsc> to suppress tic warning -- esr)
8821 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
8823 cols#80, lines#24, xmc#0,
8824 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8825 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8826 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8827 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8828 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8829 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8830 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8831 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8832 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8833 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8834 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8835 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8836 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8837 kil1=\EE$<2*/>, use=tvi92B,
8839 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8840 # in from a BSD termcap file because it looks like they do something the
8841 # old ones skip -- esr)
8842 tvi924|televideo tvi924,
8843 am, bw, hs, in, mir, msgr, xenl, xon,
8844 cols#80, it#8, lines#24, wsl#80, xmc#0,
8845 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8846 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8847 cub1=^H, cud1=^V, cuf1=^L,
8848 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8849 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8850 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8851 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8852 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8853 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8854 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8855 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8856 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8857 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8858 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8859 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8860 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8863 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8865 # Here are the settings for the external (baud) switches (S1):
8868 # 7 8 9 10 [Printer]
8869 # 1 2 3 4 [Main RS232]
8870 # -----------------------------------------------------
8889 # Settings for word length and stop-bits (S1)
8891 # Position Description
8893 # ---------------------------
8900 # S2 (external) settings
8902 # Position Up Dn Description
8903 # --------------------------------------------
8905 # X Duplex edit (transmit editing keys)
8906 # --------------------------------------------
8907 # 2 X 912/920 emulation
8909 # --------------------------------------------
8913 # --------------------------------------------
8917 # --------------------------------------------
8921 # --------------------------------------------
8925 # --------------------------------------------
8929 # --------------------------------------------
8930 # 6 X White on black display
8931 # X Black on white display
8932 # --------------------------------------------
8935 # --------------------------------------------
8938 # --------------------------------------------
8941 # --------------------------------------------
8944 # --------------------------------------------
8945 # 10 X CR/LF (Auto LF)
8948 # S3 (internal switch) settings:
8950 # Position Up Dn Description
8951 # --------------------------------------------
8954 # --------------------------------------------
8957 # --------------------------------------------
8960 # --------------------------------------------
8963 # --------------------------------------------
8966 # --------------------------------------------
8967 # 4 X Blinking block cursor
8969 # --------------------------------------------
8970 # 4 X Blinking underline cursor
8972 # --------------------------------------------
8973 # 4 X Steady block cursor
8975 # --------------------------------------------
8976 # 4 X Steady underline cursor
8978 # --------------------------------------------
8979 # 6 X Screen blanking timer (ON)
8980 # X Screen blanking timer (OFF)
8981 # --------------------------------------------
8982 # 7 X Page attributes
8984 # --------------------------------------------
8985 # 8 X DCD disconnected
8987 # --------------------------------------------
8988 # 9 X DSR disconnected
8990 # --------------------------------------------
8991 # 10 X DTR Disconnected
8993 # --------------------------------------------
8995 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
8996 tvi925|televideo 925,
8997 OTbs, am, bw, hs, ul,
8998 cols#80, lines#24, xmc#1,
8999 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
9000 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9001 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9002 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
9003 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9004 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9005 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9006 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9007 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9008 tsl=\Eh\Ef, use=adm+sgr,
9009 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9010 # to avoid "magic cookie" standout glitch:
9011 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9013 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
9015 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9016 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9017 # for additional capabilities,
9018 # The following tvi descriptions from B:pjphar and virus!mike
9019 # is for all 950s. It sets the following attributes:
9020 # full duplex (\EDF) write protect off (\E()
9021 # conversation mode (\EC) graphics mode off (\E%)
9022 # white on black (\Ed) auto page flip off (\Ew)
9023 # turn off status line (\Eg) clear status line (\Ef\r)
9024 # normal video (\E0) monitor mode off (\EX or \Eu)
9025 # edit mode (\Er) load blank char to space (\Ee\040)
9026 # line edit mode (\EO) enable buffer control (^O)
9027 # protect mode off (\E\047) duplex edit keys (\El)
9028 # program unshifted send key to send line all (\E016)
9029 # program shifted send key to send line unprotected (\E004)
9030 # set the following to nulls:
9031 # field delimiter (\Ex0\200\200)
9032 # line delimiter (\Ex1\200\200)
9033 # start-protected field delimiter (\Ex2\200\200)
9034 # end-protected field delimiter (\Ex3\200\200)
9035 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9037 # TVI 950 Switch Setting Reference Charts
9041 # S1 1 2 3 4 5 6 7 8 9 10
9042 # +-----------------------+-----+-----+-----------------------+
9043 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9045 # +------+-----------------------+-----+-----+-----------------------+
9046 # | Up | See | 7 | 2 | See |
9047 # +------+-----------------------+-----+-----+-----------------------+
9048 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9049 # +------+-----------------------+-----+-----+-----------------------+
9052 # S2 1 2 3 4 5 6 7 8 9 10
9053 # +-----+-----+-----------------+-----+-----------+-----+-----+
9054 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9055 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9056 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9057 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9058 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9059 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9063 # +-----------+-----+-----+-----+-----+-----------+
9064 # | Display | 1 | 2 | 3 | 4 | Baud |
9065 # +-----------+-----+-----+-----+-----+ |
9066 # | Printer | 7 | 8 | 9 | 10 | Rate |
9067 # +-----------+-----+-----+-----+-----+-----------+
9068 # | D | D | D | D | 9600 |
9069 # | U | D | D | D | 50 |
9070 # | D | U | D | D | 75 |
9071 # | U | U | D | D | 110 |
9072 # | D | D | U | D | 135 |
9073 # | U | D | U | D | 150 |
9074 # | D | U | U | D | 300 |
9075 # | U | U | U | D | 600 |
9076 # | D | D | D | U | 1200 |
9077 # | U | D | D | U | 1800 |
9078 # | D | U | D | U | 2400 |
9079 # | U | U | D | U | 3600 |
9080 # | D | D | U | U | 4800 |
9081 # | U | D | U | U | 7200 |
9082 # | D | U | U | U | 9600 |
9083 # | U | U | U | U | 19200 |
9084 # +-----+-----+-----+-----+-----------+
9087 # +-----+-----+-----+-----------+
9088 # | 3 | 4 | 5 | Parity |
9089 # +-----+-----+-----+-----------+
9090 # | X | X | D | None |
9091 # | D | D | U | Odd |
9092 # | D | U | U | Even |
9093 # | U | D | U | Mark |
9094 # | U | U | U | Space |
9095 # +-----+-----+-----+-----------+
9099 # +-----+-----+-----------------+
9100 # | 7 | 8 | Communication |
9101 # +-----+-----+-----------------+
9102 # | D | D | Half Duplex |
9103 # | D | U | Full Duplex |
9106 # +-----+-----+-----------------+
9108 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9109 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9110 # should be present and all tvi native modes use the same string for this.
9111 # Finally, note that BSD has cud1=^V. -- esr)
9112 tvi950|televideo 950,
9113 OTbs, am, hs, mir, msgr, xenl, xon,
9114 cols#80, it#8, lines#24, xmc#1,
9115 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9116 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9117 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9118 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9119 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
9121 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
9122 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9123 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9124 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9125 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9126 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9127 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9130 # is for 950 with two pages adds the following:
9131 # set 48 line page (\E\\2)
9132 # place cursor at page 0, line 24, column 1 (\E-07 )
9133 # set local (no send) edit keys (\Ek)
9135 # two page 950 adds the following:
9136 # when entering ex, set 24 line page (\E\\1)
9137 # when exiting ex, reset 48 line page (\E\\2)
9138 # place cursor at 0,24,1 (\E-07 )
9139 # set duplex (send) edit keys (\El) when entering vi
9140 # set local (no send) edit keys (\Ek) when exiting vi
9142 tvi950-2p|televideo950 w/2 pages,
9143 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
9144 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9145 smkx=\El, use=tvi950,
9147 # is for 950 with four pages adds the following:
9148 # set 96 line page (\E\\3)
9149 # place cursor at page 0, line 24, column 1 (\E-07 )
9151 # four page 950 adds the following:
9152 # when entering ex, set 24 line page (\E\\1)
9153 # when exiting ex, reset 96 line page (\E\\3)
9154 # place cursor at 0,24,1 (\E-07 )
9156 tvi950-4p|televideo950 w/4 pages,
9157 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
9158 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9159 smkx=\El, use=tvi950,
9161 # <is2> for reverse video 950 changes the following:
9162 # set reverse video (\Ed)
9164 # set vb accordingly (\Ed ...delay... \Eb)
9166 tvi950-rv|televideo950 rev video,
9167 flash=\Ed$<200/>\Eb,
9168 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
9171 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9172 tvi950-rv-2p|televideo950 rev video w/2 pages,
9173 flash=\Ed$<200/>\Eb,
9174 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
9175 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9176 smkx=\El, use=tvi950,
9178 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9179 tvi950-rv-4p|televideo950 rev video w/4 pages,
9180 flash=\Ed$<200/>\Eb,
9181 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
9182 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9183 smkx=\El, use=tvi950,
9184 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9185 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9186 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9187 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9188 # the :ko: string had :cl: in it, which means that one of the original
9189 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9190 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9191 # ko implies -- esr)
9192 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9194 tvi955|televideo 955,
9197 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9198 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9199 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9200 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9201 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9202 rmam=\E[=7l, rmxon=^N,
9203 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
9204 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9206 tvi955-w|955-w|televideo955 w/132 cols,
9208 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9209 # use half-intensity as normal mode, full intensity as <bold>
9210 tvi955-hb|955-hb|televideo955 half-bright,
9211 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9212 sgr0=\EG0\E[=5h, use=tvi955,
9213 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9214 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9215 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9216 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9217 # it does to the function keys. I deduced <rmam>/<smam>.
9218 # also added empty <acsc> to suppress tic warning, -- esr)
9219 tvi970|televideo 970,
9220 OTbs, OTpt, am, da, db, mir, msgr,
9221 cols#80, it#8, lines#24,
9222 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9223 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9224 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9225 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9226 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9227 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9228 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9229 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9230 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9231 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9232 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9233 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9234 smul=\E[4m, vpa=\E[%i%p1%dd,
9235 tvi970-vb|televideo 970 with visual bell,
9236 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9238 tvi970-2p|televideo 970 with using 2 pages of memory,
9239 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9241 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9242 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9243 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9244 # <smul> strings are klutzy, but at least use no screen space.
9245 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9246 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9247 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9248 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9249 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9250 tvipt|televideo personal terminal,
9253 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9254 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9255 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9256 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
9257 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9258 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9259 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9260 tvi9065|televideo 9065,
9261 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9262 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9264 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9265 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9266 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9267 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9268 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9269 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9270 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9271 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
9272 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9273 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
9275 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9276 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9277 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9278 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9279 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9280 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9281 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
9282 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9283 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9284 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9285 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9286 rep=\E[%p2%db%p1%c, rev=\EG4,
9287 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9288 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9289 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9290 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9291 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9292 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
9293 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
9294 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
9295 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
9296 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
9300 # In September 1993, Visual Technology of Westboro, Massachusetts,
9301 # merged with White Pine Software of Nashua, New Hampshire.
9303 # White Pine Software may be contacted at +1 603/886-9050.
9304 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
9307 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
9308 # Recently I hacked together the following termcap for Visual
9309 # Technology's Visual 50 terminal. It's a slight modification of
9311 # It's intended to run when the Visual 50 is in vt52 emulation mode
9312 # (I know what you're thinking; if it's emulating a vt52, then why
9313 # another termcap? Well, it turns out that the Visual 50 can handle
9314 # <dl1> and db(?) among other things, which the vt52 can't)
9315 # The termcap works OK for the most part. The only problem is on
9316 # character inserts. The whole line gets painfully redrawn for each
9317 # character typed. Any suggestions?
9318 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
9319 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
9320 # disguise; <kf7>-<kf9> are really l1-l3.
9322 OTbs, OTpt, am, da, db, msgr,
9323 cols#80, it#8, lines#24,
9324 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
9325 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9326 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
9327 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
9328 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
9329 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
9330 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
9331 # this one was BSD & SCO's vi50
9332 vi50adm|visual 50 in adm3a mode,
9334 cols#80, it#8, lines#24,
9335 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9336 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
9337 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
9338 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
9340 # From: Jeff Siegal <jbs@quiotix.com>
9342 OTbs, am, mir, msgr,
9343 cols#80, it#8, lines#24,
9344 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
9345 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9346 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
9347 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
9348 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
9351 # Visual 200 from BRL
9352 # The following switch settings are assumed for normal operation:
9353 # FULL_DUPLEX SCROLL CR
9354 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
9355 # Other switches may be set for operator convenience or communication
9357 # Character insertion is kludged in order to get around the "beep" misfeature.
9358 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
9359 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
9360 # and <dl1> strings, but we seem to get along fine without them.
9362 OTbs, OTpt, am, mir, msgr,
9363 OTkn#10, cols#80, it#8, lines#24,
9364 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
9365 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9366 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
9367 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
9368 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9369 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
9370 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
9371 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
9372 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
9373 rmacs=\EG, rmkx=\E>, rmso=\E3,
9374 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
9375 smkx=\E=, smso=\E4, tbc=\Eg,
9376 # The older Visuals didn't come with function keys. This entry uses
9377 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
9378 # If your version of vi doesn't support function keys you may want
9380 vi200-f|visual 200 no function keys,
9381 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
9382 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
9383 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
9385 vi200-rv|visual 200 reverse video,
9386 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
9388 # the function keys are programmable but we don't reprogram them to their
9389 # default values with <is2> because programming them is very verbose. maybe
9390 # an initialization file should be made for the 300 and they could be stuck
9392 # (vi300: added <rmam>/<smam> based on init string -- esr)
9393 vi300|visual 300 ansi x3.64,
9396 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
9397 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9398 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9400 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
9401 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9402 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
9403 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
9404 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
9405 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
9406 smso=\E[1m, smul=\E[4m,
9407 # some of the vi300s have older firmware that has the command
9408 # sequence for setting editing extent reversed.
9409 vi300-old|visual 300 with old firmware (set edit extent reversed),
9410 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
9413 # Visual 500 prototype entry from University of Wisconsin.
9414 # The best place to look for the escape sequences is page A1-1 of the
9415 # Visual 500 manual. The initialization sequence given here may be
9416 # overkill, but it does leave out some of the initializations which can
9417 # be done with the menus in set-up mode.
9418 # The :xp: line below is so that emacs can understand the padding requirements
9419 # of this slow terminal. :xp: is 10 time the padding factor.
9420 # (vi500: removed unknown :xp#4: termcap;
9421 # also added empty <acsc> to suppress tic warning -- esr)
9424 cols#80, it#8, lines#33,
9425 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
9426 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
9427 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9428 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
9429 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
9431 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
9432 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9433 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
9434 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
9436 # The visual 550 is a visual 300 with tektronix graphics,
9437 # and with 33 lines. clear screen is modified here to
9438 # also clear the graphics.
9439 vi550|visual 550 ansi x3.64,
9441 clear=\030\E[H\E[2J, use=vi300,
9443 vi603|visual603|visual 603,
9445 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
9446 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
9447 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
9448 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
9449 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
9450 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
9451 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
9457 # 3471 North First Street
9458 # San Jose, CA 95134
9459 # Vox: (408)-473-1200
9460 # Fax: (408) 473-1222
9461 # Web: http://www.wyse.com
9463 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
9464 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
9465 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
9466 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
9468 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
9469 # They now own the Qume and Amdek brands, too. So these are the people to
9470 # talk with about all Link, Qume, and Amdek terminals.
9472 # These entries include a few small fixes.
9473 # I canceled the bel capacities in the vb entries.
9474 # I made two trivial syntax fixes in the wyse30 entry.
9475 # I made some entries relative to adm+sgr.
9478 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
9480 # Although the Wyse 30 can support more than one attribute
9481 # it requires magic cookies to do so. Many applications do not
9482 # function well with magic cookies. The following terminfo uses
9483 # the protect mode to support one attribute (dim) without cookies.
9484 # If more than one attribute is needed then the wy30-mc terminfo
9487 wy30|wyse30|Wyse 30,
9488 am, bw, hs, mc5i, mir, msgr, xon,
9489 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9490 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9491 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
9492 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9493 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
9494 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
9495 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
9496 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
9497 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
9498 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
9499 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9500 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
9501 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
9502 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
9503 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
9504 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9505 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9506 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9507 smso=\E`7\E), tbc=\E0, tsl=\EF,
9509 # This terminal description uses the non-hidden attribute mode
9510 # (with magic cookie).
9512 # (wy30-mc: added <smcup> to suppress tic warning --esr)
9513 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
9516 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
9517 rmcup=\EG0, rmso=\EG0,
9518 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9519 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9520 smso=\EG4, use=wy30, use=adm+sgr,
9521 # The mandatory pause used by <flash> does not work with
9522 # older versions of terminfo. If you see this effect then
9523 # unset xon and delete the / from the delay.
9524 # i.e. change $<100/> to $<100>
9525 wy30-vb|wyse30-vb|wyse 30 visible bell,
9528 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
9529 # Normal) without magic cookies by using the protect mode.
9530 # The following description uses this feature, but when more
9531 # than one attribute is put on the screen at once, all attributes
9532 # will be changed to be the same as the last attribute given.
9533 # The Wyse 50 can support more attributes when used with magic
9534 # cookies. The wy50-mc terminal description uses magic cookies
9535 # to correctly handle multiple attributes on a screen.
9537 wy50|wyse50|Wyse 50,
9538 am, bw, hs, mc5i, mir, msgr, xon,
9539 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9540 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9541 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
9542 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9543 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
9544 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9545 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
9546 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
9547 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9548 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9549 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9550 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9551 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9552 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9553 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
9554 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9555 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
9556 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9557 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9558 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9559 smso=\E`6\E), tbc=\E0, tsl=\EF,
9561 # This terminal description uses the non-hidden attribute mode
9562 # (with magic cookie).
9564 # The mandatory pause used by flash does not work with some
9565 # older versions of terminfo. If you see this effect then
9566 # unset <xon> and delete the / from the delay.
9567 # i.e. change $<100/> to $<100>
9568 # (wy50-mc: added <smcup> to suppress tic warning --esr)
9569 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
9572 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
9573 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
9574 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9575 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9576 smso=\EGt, use=wy50, use=adm+sgr,
9577 wy50-vb|wyse50-vb|wyse 50 visible bell,
9579 wy50-w|wyse50-w|wyse 50 132-column,
9580 cols#132, lw#7, nlab#16, wsl#97,
9581 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9583 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
9587 # The Wyse 350 is a Wyse 50 with color.
9588 # Unfortunately this means that it has magic cookies.
9589 # The color attributes are designed to overlap the reverse, dim and
9590 # underline attributes. This is nice for monochrome applications
9591 # because you can make underline stuff green (or any other color)
9592 # but for true color applications it's not so hot because you cannot
9593 # mix color with reverse, dim or underline.
9594 # To further complicate things one of the attributes must be
9595 # black (either the foreground or the background). In reverse video
9596 # the background changes color with black letters. In normal video
9597 # the foreground changes colors on a black background.
9598 # This terminfo uses some of the more advanced features of curses
9599 # to display both color and blink. In the final analysis I am not
9600 # sure that the wy350 runs better with this terminfo than it does
9601 # with the wy50 terminfo (with user adjusted colors).
9603 # The mandatory pause used by flash does not work with
9604 # older versions of terminfo. If you see this effect then
9605 # unset xon and delete the / from the delay.
9606 # i.e. change $<100/> to $<100>
9608 # Bug: The <op> capability resets attributes.
9609 wy350|wyse350|Wyse 350,
9610 am, bw, hs, mc5i, mir, xon,
9611 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
9613 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
9614 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
9615 cub1=^H, cud1=^J, cuf1=^L,
9616 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
9617 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
9618 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9619 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
9620 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
9621 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9622 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9623 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9624 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9625 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9626 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9627 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
9628 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9629 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
9630 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
9631 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
9632 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9633 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
9634 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
9635 wy350-vb|wyse350-vb|wyse 350 visible bell,
9637 wy350-w|wyse350-w|wyse 350 132-column,
9638 cols#132, lw#7, nlab#16, wsl#97,
9639 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9641 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
9644 # This terminfo description is untested.
9645 # The wyse100 emulates an adm31, so the adm31 entry should work.
9649 cols#80, lines#24, xmc#1,
9650 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9651 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9652 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
9653 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
9654 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
9655 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
9656 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
9658 # The Wyse 120/150 has most of the features of the Wyse 60.
9659 # This terminal does not need padding up to 9600 baud!
9660 # <msgr> should be set but the clear screen fails when in
9661 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9664 wy120|wyse120|wy150|wyse150|Wyse 120/150,
9665 am, bw, hs, km, mc5i, mir, msgr, xon,
9666 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9667 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9668 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9669 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9670 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9671 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9672 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
9673 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9674 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9675 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9676 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9677 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9678 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9679 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9680 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9681 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9682 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
9683 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9684 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9685 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9686 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
9687 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9689 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9690 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9691 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9692 tbc=\E0, tsl=\EF, use=adm+sgr,
9694 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
9695 cols#132, lw#7, nlab#16, wsl#97,
9696 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9697 rs2=\E`;$<70>, use=wy120,
9699 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
9700 lh@, lines#25, lw@, nlab@,
9701 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
9703 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
9704 lh@, lines#25, lw@, nlab@,
9705 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
9707 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
9710 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
9713 # The Wyse 60 is like the Wyse 50 but with more padding.
9714 # The reset strings are slow and the pad times very depending
9715 # on other parameters such as font loading. I have tried
9716 # to follow the following outline:
9718 # <rs1> -> set personality
9719 # <rs2> -> set number of columns
9720 # <rs3> -> set number of lines
9721 # <is1> -> select the proper font
9722 # <is2> -> do the initialization
9723 # <is3> -> set up display memory (2 pages)
9725 # The Wyse 60's that have vt100 emulation are slower than the
9726 # older Wyse 60's. This change happened mid-1987.
9727 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
9729 # The meta key is only half right. This terminal will return the
9730 # high order bit set when you hit CTRL-function_key
9732 # It may be useful to assign two function keys with the
9733 # values \E=(\s look at old data in page 1
9734 # \E=W, look at bottom of page 1
9735 # where \s is a space ( ).
9738 # The Wyse 60 runs faster when the XON/XOFF
9739 # handshake is turned off.
9741 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
9742 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9743 wy60|wyse60|Wyse 60,
9744 am, bw, hs, km, mc5i, mir, msgr,
9745 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
9746 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9747 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
9748 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9749 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9750 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
9751 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9752 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
9753 ip=$<3>, is1=\EcB0\EcC1,
9754 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9755 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9756 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9757 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9758 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9759 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9760 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9761 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9762 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
9763 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9764 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9765 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
9766 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
9767 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
9768 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
9769 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9770 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9771 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9772 tbc=\E0, tsl=\EF, use=adm+sgr,
9774 wy60-w|wyse60-w|wyse 60 132-column,
9775 cols#132, lw#7, nlab#16, wsl#97,
9776 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
9777 rs2=\EeF$<150>\E`;$<150>, use=wy60,
9779 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
9780 lh@, lines#25, lw@, nlab@,
9781 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
9782 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
9783 lh@, lines#25, lw@, nlab@,
9784 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
9786 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
9788 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
9789 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
9790 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
9791 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
9792 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
9793 cols#132, lw#7, nlab#16, wsl#97,
9794 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9795 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
9796 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
9798 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
9799 lh@, lines#43, lw@, nlab@,
9800 pln@, rs3=\Ee+$<150>, use=wy60-42,
9801 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
9802 lh@, lines#43, lw@, nlab@,
9803 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
9805 wy60-vb|wyse60-vb|Wyse 60 visible bell,
9807 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
9810 # The Wyse-99GT looks at lot like the Wyse 60 except that it
9811 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
9812 # setup parameter controls the number of lines on the screen.
9813 # For the Wyse 99GT the "lines" setup parameter controls the
9814 # number of lines in a page. The screen can display 25 lines max.
9815 # The Wyse-99GT also has personalities for the VT220 and
9816 # Tektronix 4014. But this has no bearing on the native mode.
9818 # (msgr) should be set but the clear screen fails when in
9819 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9820 # then set msgr, else use msgr@.
9822 # u0 -> enter Tektronix mode
9823 # u1 -> exit Tektronix mode
9825 wy99gt|wyse99gt|Wyse 99gt,
9827 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9828 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9829 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9830 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9831 u0=\E~>\E8, u1=\E[42h, use=wy60,
9833 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9834 cols#132, lw#7, nlab#16, wsl#97,
9835 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9836 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9839 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9840 lh@, lines#25, lw@, nlab@,
9841 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9843 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9844 lh@, lines#25, lw@, nlab@,
9845 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9847 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9850 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9853 # Can't set tabs! Other bugs (ANSI mode only):
9854 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9855 # is too much complex to be described);
9856 # - meta key can't be described (the terminal forgets it when reset);
9857 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9858 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9860 # dch1 has been commented out because it causes annoying glittering when
9861 # vi deletes one character at the beginning of a line with tabs in it.
9862 # dch makes sysgen(1M) have a horrible behaviour when deleting
9863 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9864 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9865 # not, so smir and rmir are commented out as well.
9866 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9867 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9868 am, km, mc5i, mir, msgr, xenl,
9869 cols#80, it#8, lines#25, vt#3,
9870 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9871 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9872 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9873 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9874 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9875 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9876 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9877 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9878 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9879 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9880 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9881 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9882 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9883 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9884 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9885 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9886 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9887 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9888 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9889 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9890 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9891 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9892 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9894 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9895 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9896 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9898 # This is the american terminal. Here tabs work fine.
9899 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9900 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9901 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9903 # This terminal (firmware version 02) has a lot of bugs:
9905 # - other bugs in ANSI modes (see above).
9906 # This description disables handshaking when using cup. This is because
9907 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9908 # cannot be used at speeds greater than 9600 baud, because at greater
9909 # speeds handshaking is needed even for character sending. If you use
9910 # DTR handshaking, you can use even greater speeds.
9911 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9912 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9913 am, bw, hs, km, mc5i, mir, msgr, xon,
9914 cols#80, it#8, lines#25, wsl#46,
9915 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9916 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9917 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9918 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9919 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9920 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9921 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9923 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9924 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9925 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9926 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9927 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9928 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9929 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9930 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9931 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9932 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9933 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9934 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9935 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9936 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9938 # This is the american terminal. Here tabs work.
9939 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9940 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9941 hts=\E1, tbc=\E0, use=wy99f,
9944 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9945 # The reset strings are slow and the pad times very depending
9946 # on other parameters such as font loading. I have tried
9947 # to follow the following outline:
9949 # <rs1> -> set personality
9950 # <rs2> -> set number of columns
9951 # <rs3> -> set number of lines
9952 # <is1> -> select the proper font
9953 # <is2> -> do the initialization
9954 # <is3> -> set up display memory (2 pages)
9956 # The display memory may be used for either text or graphics.
9957 # When "Display Memory = Shared" the terminal will have more pages
9958 # but garbage may be left on the screen when you switch from
9959 # graphics to text. If "Display Memory = Unshared" then the
9960 # text area will be only one page long.
9962 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9963 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9964 wy160|wyse160|Wyse 160,
9965 am, bw, hs, km, mc5i, mir, msgr,
9966 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9967 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9968 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9969 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9970 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9971 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9972 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9973 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9974 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9975 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9976 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9977 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9978 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9979 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9980 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9981 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9982 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9983 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9984 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9985 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9986 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9987 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9988 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9989 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9990 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9991 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9992 tbc=\E0, tsl=\EF, use=adm+sgr,
9994 wy160-w|wyse160-w|wyse 160 132-column,
9995 cols#132, lw#7, nlab#16, wsl#90,
9996 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9997 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9999 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10000 lh@, lines#25, lw@, nlab@,
10001 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10002 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10003 lh@, lines#25, lw@, nlab@,
10004 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10006 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10008 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10009 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10010 rs3=\Ee*$<150>, use=wy160,
10011 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10012 cols#132, lw#7, nlab#16, wsl#90,
10013 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10014 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10016 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10017 lh@, lines#43, lw@, nlab@,
10018 pln@, rs3=\Ee+$<150>, use=wy160-42,
10019 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10020 lh@, lines#43, lw@, nlab@,
10021 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10023 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10025 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10028 # The Wyse 75 is a vt100 lookalike without advanced video.
10030 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10031 # Underline) without magic cookies. The following description
10032 # uses this capability, but when more than one attribute is
10033 # put on the screen at once, all attributes will be changed
10034 # to be the same as the last attribute given.
10035 # The Wyse 75 can support more attributes when used with magic
10036 # cookies. The wy75-mc terminal description uses magic cookies
10037 # to correctly handle multiple attributes on a screen.
10039 wy75|wyse75|wyse 75,
10040 am, hs, mc5i, mir, msgr, xenl, xon,
10041 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10042 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10043 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10044 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
10045 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10046 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10047 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10048 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10049 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10050 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10051 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
10052 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10053 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10054 ind=\n$<2>, ip=$<1>,
10055 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10056 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10057 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10058 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10059 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10060 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10061 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10062 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10063 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10064 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10065 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10066 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10067 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10069 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
10070 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10071 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10072 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10074 # This terminal description uses the non-hidden attribute mode
10075 # (with magic cookie).
10077 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10080 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10081 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10082 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
10083 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10085 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10088 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10090 rs2=\E[35h\E[?3h$<80>, use=wy75,
10091 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10095 # Wyse 85 emulating a vt220 7 bit mode.
10096 # 24 line screen with status line.
10098 # The vt220 mode permits more function keys but it wipes out
10099 # the escape key. I strongly recommend that <f11> be set to
10101 # The terminal may have to be set for 8 data bits and 2 stop
10102 # bits for the arrow keys to work.
10103 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10104 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10105 # <dch> leave trash on the screen when used without XON/XOFF.
10107 wy85|wyse85|wyse 85,
10108 am, hs, mc5i, mir, msgr, xenl, xon,
10109 cols#80, it#8, lines#24, wsl#80,
10110 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10111 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10112 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10113 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10114 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10115 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10116 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10117 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10118 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10119 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10120 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10121 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10122 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10123 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10124 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10125 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10126 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10127 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10128 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10129 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10130 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10131 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10132 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10133 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10134 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10135 rs3=\E[?5l, sc=\E7,
10136 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10137 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10138 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10139 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10141 # Wyse 85 with visual bell.
10142 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10143 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
10145 # Wyse 85 in 132-column mode.
10146 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10148 rs2=\E[35h\E[?3h$<70>, use=wy85,
10150 # Wyse 85 in 132-column mode with visual bell.
10151 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10154 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10155 # This copes with an apparent firmware bug in the wy85. He writes:
10156 # "What I did was change leave the terminal cursor keys set to Normal
10157 # (instead of application), and change \E[ to \233 for all the keys in
10158 # terminfo. At one point, I found some reference indicating that this
10159 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10160 # me), but I can't find that and the server under my bookmark to "Wyse
10161 # Technical" isn't responding. So there's the question of wether the wy85
10162 # terminfo should reflect the manufactuer's intended behaviour of the terminal
10164 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10165 am, hs, mc5i, mir, msgr, xenl, xon,
10166 cols#80, it#8, lines#24, wsl#80,
10167 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10168 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10169 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10170 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10171 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10172 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10173 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10174 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10175 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10176 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10177 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10178 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10179 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10180 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10181 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10182 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10183 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10184 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10185 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10186 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10187 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10188 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10189 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10190 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10191 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10192 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10193 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10194 rs3=\E[?5l, sc=\E7,
10195 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10196 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10197 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10198 tsl=\E[40h\E7\E[25;%i%p1%dH,
10200 # Wyse 185 emulating a vt320 7 bit mode.
10202 # This terminal always displays 25 lines. These lines may be used
10203 # as 24 data lines and a terminal status line (top or bottom) or
10204 # 25 data lines. The 48 and 50 line modes change the page size
10205 # and not the number of lines on the screen.
10207 # The Compose Character key can be used as a meta key if changed
10210 wy185|wyse185|wyse 185,
10211 am, hs, km, mc5i, mir, msgr, xenl, xon,
10212 cols#80, it#8, lines#24, wsl#80,
10213 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10214 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10215 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10216 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10217 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10218 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10219 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10220 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10221 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10222 el=\E[K, el1=\E[1K, enacs=\E)0,
10223 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
10224 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10225 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10226 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10227 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10228 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10229 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10230 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10231 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10232 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10233 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10234 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10235 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10236 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10237 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10238 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10239 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10240 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10241 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10242 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10243 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10244 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10247 # Wyse 185 with 24 data lines and top status (terminal status)
10248 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10250 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10253 # Wyse 185 with visual bell.
10254 wy185-vb|wyse185-vb|wyse 185+flash,
10257 # Wyse 185 in 132-column mode.
10258 wy185-w|wyse185-w|wyse 185 in 132-column mode,
10260 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10261 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
10263 # Wyse 185 in 132-column mode with visual bell.
10264 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
10267 # wy325 terminfo entries
10268 # Done by Joe H. Davis 3-9-92
10270 # lines 25 columns 80
10272 wy325|wyse325|Wyse epc,
10273 am, bw, hs, mc5i, mir,
10274 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10275 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10276 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10277 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10278 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10279 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10280 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
10281 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10282 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
10283 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10284 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10285 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10286 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10287 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10288 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
10289 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10290 mc0=\EP, mc4=^T, mc5=\Ed#,
10291 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10292 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10293 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10294 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
10295 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10296 rs3=\EwG\Ee($<100>,
10297 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
10298 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10299 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
10300 tsl=\EF, use=adm+sgr,
10303 # lines 24 columns 80 vb
10305 wy325-vb|wyse325-vb|wyse-325 with visual bell,
10309 # lines 24 columns 132
10311 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
10312 cols#132, lw#7, nlab#16, wsl#97,
10313 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10314 rs2=\E`;$<70>, use=wy325,
10316 # lines 25 columns 80
10318 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
10319 lh@, lines#25, lw@, nlab@,
10320 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10322 # lines 25 columns 132
10324 wy325-25w|wyse325-25w|wy325 132 columns,
10325 lh@, lines#25, lw@, nlab@,
10326 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10328 # lines 25 columns 132 vb
10330 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
10334 # lines 42 columns 80
10336 wy325-42|wyse325-42|wyse-325 42 lines,
10337 lh@, lines#42, lw@, nlab@,
10338 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10340 # lines 42 columns 132
10342 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
10343 lh@, lines#42, lw@, nlab@,
10344 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10346 # lines 42 columns 132 vb
10348 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
10351 # lines 43 columns 80
10353 wy325-43|wyse325-43|wyse-325 43 lines,
10354 lh@, lines#43, lw@, nlab@,
10357 # lines 43 columns 132
10359 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
10360 lh@, lines#43, lw@, nlab@,
10361 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10363 # lines 43 columns 132 vb
10365 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
10368 # Wyse 370 -- 24 line screen with status line.
10370 # The terminal may have to be set for 8 data bits and 2 stop
10371 # bits for the arrow keys to work.
10373 # If you change keyboards the terminal will send different
10374 # escape sequences.
10375 # The following definition is for the basic terminal without
10378 # <u0> -> enter Tektronix 4010/4014 mode
10379 # <u1> -> exit Tektronix 4010/4014 mode
10380 # <u2> -> enter ASCII mode (from any ANSI mode)
10381 # <u3> -> exit ASCII mode (goto native ANSI mode)
10382 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
10383 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
10385 # Bug: The <op> capability resets attributes.
10386 wy370-nk|wyse 370 without function keys,
10387 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
10388 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
10389 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10390 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10391 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10392 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10393 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10394 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10395 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
10396 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10397 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
10398 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
10399 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
10400 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
10401 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10403 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
10404 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
10405 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
10406 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
10408 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
10409 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
10410 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
10411 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10412 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
10413 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
10414 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10415 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10416 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10417 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
10418 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
10419 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
10421 # Function key set for the ASCII (wy-50 compatible) keyboard
10422 # This is the default 370.
10424 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
10425 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10426 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
10427 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10428 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
10429 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
10430 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
10431 knp=\E[U, kpp=\E[V, use=wy370-nk,
10433 # Function key set for the VT-320 (and wy85) compatible keyboard
10435 wy370-105k|Wyse 370 with 105 key keyboard,
10436 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10437 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10438 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10439 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
10440 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10441 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
10442 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
10443 use=wy370-nk, use=vt220+keypad,
10445 # Function key set for the PC compatible keyboard
10447 wy370-EPC|Wyse 370 with 102 key keyboard,
10448 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10449 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
10450 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10451 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10452 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
10454 # Wyse 370 with visual bell.
10455 wy370-vb|Wyse 370 with visible bell,
10458 # Wyse 370 in 132-column mode.
10459 wy370-w|Wyse 370 in 132-column mode,
10461 rs2=\E[35h\E[?3h$<70>, use=wy370,
10463 # Wyse 370 in 132-column mode with visual bell.
10464 wy370-wvb|Wyse 370 with visible bell 132-columns,
10465 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
10466 wy370-rv|Wyse 370 reverse video,
10467 rs3=\E[32h\E[?5h, use=wy370,
10469 # Wyse 99gt Tektronix 4010/4014 emulator,
10471 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
10474 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10475 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10477 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10479 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10480 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
10482 # Wyse 160 Tektronix 4010/4014 emulator,
10484 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
10485 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10486 home=^]8`g @\037, use=wy99gt-tek,
10488 # Wyse 370 Tektronix 4010/4014 emulator,
10490 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
10493 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10494 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
10496 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10498 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10499 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
10500 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
10502 # Vendor-supplied Wyse entries end here.
10505 #TITLE: TERMINFO ENTRY WY520
10507 # The WY520 terminfo is based on the WY285 entry published on the WYSE
10508 # BBS with the addition of more function keys and special keys.
10510 # rs1 -> set personality
10511 # rs2 -> set number of columns
10512 # rs3 -> set number of lines
10513 # is1 -> select the proper font
10514 # is2 -> do the initialization
10515 # is3 -> If this string is empty then rs3 gets sent.
10517 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
10518 # - The BS key is programmed to generate BS in smcup since
10519 # is2 doesn't seem to work.
10520 # - Remove and shift/Remove: delete a character
10521 # - Insert : enter insert mode
10522 # - Find : delete to end of file
10523 # - Select : clear a line
10524 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
10526 # - Bottom status line (host writable line) is used.
10527 # - smkx,rmkx are removed because this would put the numeric
10528 # keypad in Dec application mode which doesn't seem to work
10529 # with SCO applications.
10531 wy520|wyse520|wyse 520,
10532 am, hs, km, mc5i, mir, xenl, xon,
10533 cols#80, it#8, lines#24, wsl#80,
10534 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10535 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10536 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10537 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10538 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10539 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10540 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
10541 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
10542 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
10543 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
10544 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
10545 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10546 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
10547 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10548 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
10549 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
10550 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
10551 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
10552 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
10553 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
10554 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
10555 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10556 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
10557 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
10558 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10559 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10560 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10561 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
10562 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10563 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
10564 vpa=\E[%i%p1%dd, use=vt220+keypad,
10566 # Wyse 520 with 24 data lines and status (terminal status)
10567 wy520-24|wyse520-24|wyse 520 with 24 data lines,
10569 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10572 # Wyse 520 with visual bell.
10573 wy520-vb|wyse520-vb|wyse 520 with visible bell,
10574 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
10576 # Wyse 520 in 132-column mode.
10577 wy520-w|wyse520-w|wyse 520 in 132-column mode,
10579 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10580 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
10582 # Wyse 520 in 132-column mode with visual bell.
10583 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
10584 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
10587 # Wyse 520 emulating a vt420 7 bit mode.
10588 # The DEL key is programmed to generate BS in is2.
10589 # With EPC keyboard.
10590 # - 'End' key will clear till end of line on EPC keyboard
10591 # - Shift/End : ignored.
10592 # - Insert : enter insert mode.
10593 # - Delete : delete a character (have to change interrupt character
10594 # to CTRL-C: stty intr '^c') for it to work since the
10595 # Delete key sends 7FH.
10596 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
10597 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
10598 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
10601 # Wyse 520 with 24 data lines and status (terminal status)
10602 # with EPC keyboard.
10603 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
10605 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10608 # Wyse 520 with visual bell.
10609 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
10610 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
10612 # Wyse 520 in 132-column mode.
10613 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
10615 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10616 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
10618 # Wyse 520 in 132-column mode with visual bell.
10619 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
10620 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
10622 # Wyse 520 in 80-column, 36 lines
10623 wy520-36|wyse520-36|wyse 520 with 36 data lines,
10626 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10629 # Wyse 520 in 80-column, 48 lines
10630 wy520-48|wyse520-48|wyse 520 with 48 data lines,
10633 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10636 # Wyse 520 in 132-column, 36 lines
10637 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
10640 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10643 # Wyse 520 in 132-column, 48 lines
10644 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
10647 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10651 # Wyse 520 in 80-column, 36 lines with EPC keyboard
10652 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
10655 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10658 # Wyse 520 in 80-column, 48 lines with EPC keyboard
10659 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
10662 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10665 # Wyse 520 in 132-column, 36 lines with EPC keyboard
10666 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
10669 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10672 # Wyse 520 in 132-column, 48 lines with EPC keyboard
10673 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
10676 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10679 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
10680 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
10681 # file and we don't know what <hts> is -- esr)
10682 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
10684 cols#80, it#8, lines#24,
10685 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
10686 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
10687 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
10688 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
10689 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
10690 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
10693 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
10694 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
10695 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10696 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
10699 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
10700 wy100q|Wyse 100 for Quotron,
10702 cols#80, lines#24, xmc#1,
10703 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
10704 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10705 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
10706 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
10707 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
10709 #### Kermit terminal emulations
10711 # Obsolete Kermit versions may be listed in the section describing obsolete
10712 # non-ANSI terminal emulators later in the file.
10715 # KERMIT standard all versions.
10716 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10717 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
10718 # From: greg small <gts@populi.berkeley.edu> 9-25-84
10719 kermit|standard kermit,
10722 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
10723 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
10724 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
10725 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
10726 kermit-am|standard kermit plus auto-margin,
10728 is2=K1 Standard Kermit plus Automatic Margins\n,
10730 # IBMPC Kermit 1.2.
10731 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
10732 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
10734 # From: greg small <gts@populi.berkeley.edu> 8-30-84
10735 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
10738 clear=\EH\EJ, ed@, el@,
10739 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
10740 # IBMPC Kermit 1.20
10741 # Cannot use line 25, now acts funny like ansi special scrolling region.
10742 # Initialization must escape from that region by cursor position to line 24.
10743 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
10744 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
10745 # From: greg small <gts@populi.berkeley.edu> 12-19-84
10746 pckermit120|UCB IBMPC Kermit 1.20,
10748 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
10750 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
10751 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
10752 # MS-DOS Kermit 2.27 for the IBMPC
10753 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10754 # Cannot use line 25, now acts funny like ansi special scrolling region.
10755 # Initialization must escape from that region by cursor position to line 24.
10756 # Does not use am: because autowrap is lost when kermit dropped and restarted.
10757 # Reverse video for standout like H19.
10758 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
10759 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10760 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
10762 cols#80, it#8, lines#24,
10763 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
10764 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10765 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
10766 home=\EH, ht=^I, il1=\EL,
10767 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
10768 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
10769 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
10770 # MS-DOS Kermit 2.27 with automatic margins
10771 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10772 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
10774 cvvis=\EO\Eq\EG\EvK5,
10775 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
10777 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
10778 # Automatic margins now default. Use ansi <sgr> for highlights.
10779 # Define function keys.
10780 # (msk22714: removed obsolete ":kn#10:" -- esr)
10781 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10782 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
10784 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
10785 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
10786 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
10787 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10788 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
10789 # This was designed for a VT320 emulator, but it is probably a good start
10790 # at support for the VT320 itself.
10791 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
10792 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
10793 vt320-k3|MS-Kermit 3.00's vt320 emulation,
10794 am, eslok, hs, km, mir, msgr, xenl,
10795 cols#80, it#8, lines#49, pb#9600, vt#3,
10796 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10797 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10798 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
10799 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10800 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10801 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10802 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10803 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
10804 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
10805 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10806 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10807 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
10808 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
10809 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10810 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
10811 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
10812 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
10813 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
10814 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
10815 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
10816 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10817 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
10818 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
10819 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
10820 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
10821 vt320-k311|dec vt320 series as defined by kermit 3.11,
10822 am, eslok, hs, mir, msgr, xenl, xon,
10823 cols#80, it#8, lines#24, vt#3,
10824 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10825 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10826 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
10827 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10828 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10829 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10830 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10831 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10832 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10833 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10834 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10835 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10836 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10837 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10838 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10839 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10840 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10841 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10842 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10843 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10845 ######## NON-ANSI TERMINAL EMULATIONS
10850 # These entries attempt to describe Avatar, a terminal emulation used with
10851 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10852 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10853 # excessively dependent on PC idiosyncracies, but apparently rather popular
10854 # in the BBS world.
10856 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10857 # models that terminfo knows about. An Avatar color attribute is the
10858 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10860 # I wrote these entries while looking at the Avatar spec. I don't have
10861 # the facilities to test them. Let me know if they work, or don't.
10863 # Avatar escapes not used by these entries (because maybe you're smarter
10864 # and more motivated than I am and can figure out how to wrap terminfo
10865 # around some of them, and because they are weird enough to be funny):
10867 # ^L -- clear window/reset current attribute to default
10868 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10870 # bit: 6 5 4 3 2 1 0
10872 # +---+---+ | +---+---+
10874 # | | foreground color
10875 # | foreground intensity
10878 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10879 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10880 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10881 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10882 # (^V^L and ^V^M set the current attribute as a side-effect.)
10883 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10884 # in the pattern, <c> the number of times the pattern
10885 # should be repeated. If either value is 0, no-op.
10886 # The pattern can contain Avatar console codes,
10887 # including other ^V ^Y patterns.
10889 # ^V^O -- clockwise mode on; turn print direction right each time you
10890 # hit a window edge (yes, really). Turned off by CR
10892 # ^V^Q%c -- query the driver
10893 # ^V^R -- driver reset
10894 # ^V^S -- Sound tone (PC-specific)
10895 # ^V^T -- change highlight at current cursor poition to %c
10896 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10897 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10900 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10901 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10902 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10903 # which is the only method that will actually work for multiple highlights.)
10905 # Update by TD - 2004: half of this was inconsistent. Found documentation
10906 # and repaired most of the damage. sgr0 is probably incorrect, but the
10907 # available documentation gives no clues for a workable string.
10908 avatar0|avatar terminal emulator level 0,
10910 cols#80, it#8, lines#25,
10911 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10912 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10913 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10915 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10916 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10918 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10919 avatar0+|avatar terminal emulator level 0+,
10920 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10921 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10922 avatar|avatar1|avatar terminal emulator level 1,
10923 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10924 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10928 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10929 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10930 # '90s), especially in the BBS world, and still has some loyal users due to
10931 # its very small memory footprint and to a cute macro language.
10932 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10933 am, bw, mir, msgr, xenl,
10934 cols#80, it#8, lines#25,
10935 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10936 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10937 cub1=^H, cud1=^C, cuf1=^B,
10938 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10939 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10940 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10941 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10942 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10943 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10944 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10945 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10946 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10947 rbcomm-nam|IBM PC with RBcomm without autowrap,
10949 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10950 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10951 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10952 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10954 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10955 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10956 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10958 ######## LCD DISPLAYS
10961 #### Matrix Orbital
10962 # from: Eric Z. Ayers (eric@ale.org)
10964 # Matrix Orbital 20x4 LCD display
10965 # Command Character is 0xFE (decimal 254, octal 376)
10967 # On this device, cursor addressability isn't possible. The LCD expects:
10968 # 0xfe G <col> <row>
10969 # for cup: %p1 == row and %p2 is column
10972 # cup=\376G%p2%c%p1%c
10973 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10974 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10976 # Alas, there is no cursor upline capability on this display.
10978 # These entries add some 'sanity stuff' to the clear function. That is, it
10979 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10980 # and turns off the cursor blinking and stuff like that.
10982 # NOTE: calling 'beep' turns on the backlight (bell)
10983 # NOTE: calling 'flash' turns it on and back off (visual bell)
10985 MtxOrb|Generic Matrix Orbital LCD display,
10986 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10987 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10988 flash=\376B\001$<200>\376F, home=\376H,
10989 MtxOrb204|20x4 Matrix Orbital LCD display,
10990 cols#20, lines#4, use=MtxOrb,
10991 MtxOrb162|16x2 Matrix Orbital LCD display,
10992 cols#16, lines#2, use=MtxOrb,
10995 ######## OLDER TERMINAL TYPES
10997 # This section is devoted to older commercial terminal brands that are now
10998 # discontinued, but known to be still in use or represented by emulations.
11001 #### AT&T (att, tty)
11003 # This section also includes Teletype-branded VDTs.
11005 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11006 # Boundless Technologies); for details, see the header comment on the ADDS
11009 # These are AT&T's official terminfo entries. All-caps aliases have been
11012 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11013 am, eo, mir, msgr, xon,
11014 cols#80, it#8, lines#24,
11015 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
11016 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11017 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11018 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11019 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11020 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11021 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11022 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11023 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11024 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11025 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11026 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11027 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11029 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11030 mc0@, mc4@, mc5@, use=att2300,
11032 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11033 # Seems upward compatible with vt100, plus ins/del line/char.
11034 # On sgr, the protection parameter is ignored.
11035 # No check is made to make sure that only 3 parameters are output.
11036 # standout= reverse + half-intensity = 3 | 5.
11037 # bold= reverse + underline = 2 | 3.
11038 # note that half-bright blinking doesn't look different from normal blinking.
11039 # NOTE:you must program the function keys first, label second!
11040 # (att4410: a BSD entry has been seen with the following capabilities:
11041 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11042 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11043 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11044 am, hs, mir, msgr, xon,
11045 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11046 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11047 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
11048 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11049 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11050 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11051 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
11052 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
11053 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11054 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11055 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11056 ll=\E[24H, nel=^M^J,
11057 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
11058 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11059 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11061 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11062 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11063 tsl=\E7\E[25;%p1%{1}%+%dH,
11065 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11067 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11069 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11071 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11074 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11076 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11078 # 5410 in terms of a vt100
11079 # (v5410: added <rmam>/<smam> based on init string -- esr)
11080 v5410|att5410 in terms of a vt100,
11081 am, mir, msgr, xon,
11082 cols#80, it#8, lines#24, vt#3,
11083 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11084 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11085 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11086 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
11087 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11088 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11089 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11090 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11091 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11092 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11093 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11095 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
11096 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11097 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11101 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11102 # even! the 5420 has three modes: scroll, window or page mode
11103 # this terminfo should work in scroll or window mode, but doesn't
11104 # take advantage of any of the differences between them.
11106 # Has memory below (2 lines!)
11107 # 3 pages of memory (plus some spare)
11108 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11109 # <hpa>, <hts> would work for these, but these work in both scroll and window
11110 # mode... Unset insert character so insert mode works
11111 # <is1> sets 80 column mode,
11112 # <is2> escape sequence:
11113 # 1) turn off all fonts
11114 # 2) function keys off, keyboard lock off, control display off,
11115 # insert mode off, erasure mode off,
11116 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11117 # 4) reset origin mode
11118 # 5) set line wraparound
11119 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11121 # 8) program ENTER to transmit ^J,
11122 # We use \212 to program the ^J because a bare ^J will get translated by
11123 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11125 # <is3> set screen color to black,
11126 # No representation in terminfo for the delete word key: kdw1=\Ed
11127 # Key capabilities assume the power-up send sequence...
11128 # This <rmcup> is not strictly necessary, but it helps maximize
11129 # memory usefulness: <rmcup=\Ez>,
11130 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11131 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11132 # smkx programs the SYS PF keys to send a set sequence.
11133 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11134 # This string causes them to send the strings <kf1>-<kf8>
11135 # when pressed in SYS PF mode.
11136 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11137 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11138 OTbs, db, mir, xon,
11139 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11140 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11141 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11142 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11143 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11144 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11145 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11146 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11147 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
11148 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11149 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11150 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11151 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11152 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11153 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11154 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11155 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11156 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11157 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11158 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11159 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11160 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11161 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11162 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11165 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11166 cols#132, lm#54, wsl#97,
11167 is1=\E[?3h$<100>, use=att4415,
11169 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11170 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11172 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11173 cols#132, lm#54, wsl#97,
11174 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11177 # Note that this mode permits programming USER PF KEYS and labels
11178 # However, when you program user pf labels you have to reselect
11179 # user pf keys to make them appear!
11180 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11181 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11182 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
11183 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11185 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11186 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11189 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11190 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11193 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11194 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11197 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11198 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11201 att5420_2|AT&T 5420 model 2 80 cols,
11202 am, db, hs, mir, msgr, xon,
11203 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11204 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11205 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11206 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11207 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11208 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11209 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11210 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11211 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11212 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
11213 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11214 indn=\E[%p1%dE, invis=\E[8m,
11215 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11216 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
11217 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
11218 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
11219 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
11220 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11221 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11222 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
11223 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
11224 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
11225 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
11226 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
11227 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11229 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11230 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
11231 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11232 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11233 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
11235 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11238 att4418|att5418|AT&T 5418 80 cols,
11241 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11242 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
11243 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11244 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11245 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
11246 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
11247 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
11248 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
11249 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
11250 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
11251 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
11252 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
11253 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
11254 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
11255 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11256 att4418-w|att5418-w|AT&T 5418 132 cols,
11258 is1=\E[?3h, use=att5418,
11260 att4420|tty4420|teletype 4420,
11261 OTbs, da, db, eo, msgr, ul, xon,
11262 cols#80, lines#24, lm#72,
11263 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
11264 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
11265 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
11266 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
11267 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
11268 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
11269 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
11270 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
11272 # The following is a terminfo entry for the Teletype 4424
11273 # asynchronous keyboard-display terminal. It supports
11274 # the vi editor. The terminal must be set up as follows,
11276 # HIGHLIGHT DEFINITION 3-TONE
11277 # DISPLAY FUNCTION GROUP III
11279 # The second entry below provides limited (a la adm3a)
11280 # operation under GROUP II.
11282 # This must be used with DISPLAY FUNCTION GROUP I or III
11283 # and HIGHLIGHT DEFINITION 3-TONE
11284 # The terminal has either bold or blink, depending on options
11286 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
11287 att4424|tty4424|teletype 4424,
11290 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11291 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
11292 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11293 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
11294 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
11295 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
11296 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11297 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
11298 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11299 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11300 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
11302 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
11303 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
11306 att4424-1|tty4424-1|teletype 4424 in display function group I,
11307 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
11310 # This entry is not one of AT&T's official ones, it was translated from the
11311 # 4.4BSD termcap file. The highlight strings are different from att4424.
11312 # I have no idea why this is -- older firmware version, maybe?
11313 # The following two lines are the comment originally attached to the entry:
11314 # This entry appears to avoid the top line - I have no idea why.
11315 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
11316 att4424m|tty4424m|teletype 4424M,
11318 cols#80, it#8, lines#23,
11319 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11320 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
11321 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
11322 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11323 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
11324 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
11325 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
11327 # The Teletype 5425 is really version 2 of the Teletype 5420. It
11328 # is quite similar, except for some minor differences. No page
11329 # mode, for example, so all of the <cup> sequences used above have
11330 # to change back to what's being used for the 5410. Many of the
11331 # option settings have changed their numbering as well.
11333 # This has been tested on a preliminary model.
11335 # (att5425: added <rmam>/<smam> based on the init string -- esr)
11336 att5425|tty5425|att4425|AT&T 4425/5425,
11337 am, da, db, hs, mir, msgr, xenl, xon,
11338 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11339 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11340 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11341 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
11342 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11343 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11344 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11345 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11346 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
11347 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
11348 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
11349 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11350 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
11351 invis=\E[8m, is1=\E<\E[?3l$<100>,
11352 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
11353 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11354 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11355 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
11356 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
11357 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
11358 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
11360 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11361 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
11362 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
11363 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
11364 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
11365 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11366 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11367 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
11368 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
11369 vpa=\E[%p1%{1}%+%dd,
11371 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
11372 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
11374 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
11375 cols#132, lm#54, wsl#97,
11376 is1=\E[?3h$<100>, use=tty5425,
11378 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
11379 # I also added <rmam>/<smam> -- esr)
11380 att4426|tty4426|teletype 4426S,
11382 cols#80, lines#24, lm#48,
11383 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11384 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
11385 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
11386 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11387 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
11388 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
11389 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
11390 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
11391 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
11392 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11393 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
11394 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
11395 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
11396 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
11397 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
11398 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
11401 # Terminfo entry for the AT&T 510 A Personal Terminal
11402 # Function keys 9 - 16 are available only after the
11403 # screen labeled (soft keys/action blocks) are labeled. Function key
11404 # 9 corresponds to the leftmost touch target on the screen,
11405 # function key 16 corresponds to the rightmost.
11407 # This entry is based on one done by Ernie Rice at Summit, NJ and
11408 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
11409 att510a|bct510a|AT&T 510A Personal Terminal,
11410 am, mir, msgr, xenl, xon,
11411 cols#80, lh#2, lines#24, lw#7, nlab#8,
11412 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11413 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11414 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
11415 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11416 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11417 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
11418 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
11419 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
11420 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
11421 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
11422 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
11423 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
11424 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
11425 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
11426 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
11427 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11428 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
11429 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
11430 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
11431 smul=\E[4m, tbc=\E[3g,
11433 # Terminfo entry for the AT&T 510 D Personal Terminal
11434 # Function keys 9 through 16 are accessed by bringing up the
11436 # Function key 9 corresponds to the leftmost touch target on the screen,
11437 # function key 16 corresponds to the rightmost.
11439 # There are problems with soft key labeling. These are due to
11440 # strangenesses in the native terminal that are impossible to
11441 # describe in a terminfo.
11442 att510d|bct510d|AT&T 510D Personal Terminal,
11443 am, da, db, mir, msgr, xenl, xon,
11444 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
11445 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11446 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11447 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
11448 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11449 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11450 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
11451 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
11452 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
11453 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11454 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11455 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
11456 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11457 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
11458 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
11459 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
11460 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
11461 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
11462 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11463 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11464 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
11465 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
11466 rs2=\E[5;0|, sc=\E7,
11467 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11468 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
11469 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
11470 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11472 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
11473 att500|att513|AT&T 513 using page mode,
11474 am, chts, mir, msgr, xenl, xon,
11475 cols#80, lh#2, lines#24, lw#8, nlab#8,
11476 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11477 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11478 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
11479 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11480 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11482 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
11483 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11484 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11485 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11486 indn=\E[%p1%dE, invis=\E[8m,
11487 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
11488 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11489 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11490 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
11491 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
11492 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
11493 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
11494 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
11495 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11496 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
11497 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11498 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
11499 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
11500 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11501 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11502 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
11503 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
11504 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
11506 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
11507 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
11508 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
11509 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11510 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11511 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
11512 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
11514 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
11515 rs2=\E[5;0|, sc=\E7,
11516 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11517 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
11518 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
11519 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11522 # printer must be set to EMUL ANSI to accept ESC codes
11523 # <cuu1> stops at top margin
11524 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
11525 # and alt font ascii,wrap on,tabs cleared
11526 # <is2> disables newline on LF,Emphasized off
11527 # The <u0> capability sets form length
11528 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
11530 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
11531 orhi#100, orl#12, orvi#72,
11532 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
11534 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
11535 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
11536 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
11537 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
11539 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
11540 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
11541 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
11542 u0=\E[%p1%dt, vpa=\E[%p1%dd,
11544 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
11545 # The following SET-UP modes are assumed for normal operation:
11546 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
11547 # Other SET-UP modes may be set for operator convenience or communication
11548 # requirements. This termcap description is for the Resident Terminal Mode.
11549 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11550 # The BRL entry also said: UNSAFE :ll=\E[70H:
11551 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
11553 cols#88, it#8, lines#70, vt#3,
11554 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11555 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11556 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11557 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
11558 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
11559 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11560 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
11563 # 5620 terminfo (2.0 or later ROMS with char attributes)
11564 # The following SET-UP modes are assumed for normal operation:
11565 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
11566 # Other SET-UP modes may be set for operator convenience or communication
11567 # requirements. This termcap description is for Resident Terminal Mode. No
11568 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11569 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
11570 # Be aware that older versions of the dmd have a firmware bug that affects
11571 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
11572 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
11573 # also has <ll>=\E[70H commented out and marked unsafe.
11574 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
11575 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
11576 OTbs, am, msgr, npc, xon,
11577 cols#88, it#8, lines#70,
11578 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
11579 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
11580 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
11581 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11582 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
11583 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11584 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
11585 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
11586 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
11587 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
11588 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
11589 lines#24, use=att5620,
11590 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
11591 lines#34, use=att5620,
11592 # 5620 layer running the "S" system's downloaded graphics handler:
11593 att5620-s|tty5620-s|layer|vitty|5620 S layer,
11595 cols#80, it#8, lines#72,
11596 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
11597 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
11598 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
11599 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11602 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
11604 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
11605 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
11606 att605|AT&T 605 80 column 102key keyboard,
11608 cols#80, lines#24, lw#8, nlab#8, wsl#80,
11609 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11610 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
11611 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
11612 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11613 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11614 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11615 il1=\E[L, ind=^J, invis=\E[8m,
11616 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
11617 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
11618 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11619 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
11620 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
11621 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
11622 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
11623 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
11624 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
11625 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
11626 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
11627 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
11628 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
11629 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
11630 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11631 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11632 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11633 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
11634 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
11635 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
11636 tsl=\E7\E[25;%i%p1%dx,
11637 att605-pc|ATT 605 in pc term mode,
11638 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11639 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
11640 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
11641 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11642 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
11643 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
11644 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
11645 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
11646 xoffc=g, xonc=e, use=att605,
11647 att605-w|AT&T 605-w 132 column 102 key keyboard,
11649 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
11651 # (att610: I added <rmam>/<smam> based on the init string. I also
11652 # added <indn> and <rin> because the BSD file says the att615s have them,
11653 # and the 615 is like a 610 with a big keyboard, and most of their other
11654 # smart terminals support the same sequence -- esr)
11655 att610|AT&T 610; 80 column; 98key keyboard,
11656 am, eslok, hs, mir, msgr, xenl, xon,
11657 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11658 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11659 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11660 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11661 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11662 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11663 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11664 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11665 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11666 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11667 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11668 indn=\E[%p1%dS, invis=\E[8m,
11669 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
11670 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11671 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11672 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11673 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11674 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11675 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
11677 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11678 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11679 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11680 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
11681 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11682 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11683 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
11684 att610-w|AT&T 610; 132 column; 98key keyboard,
11686 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11689 att610-103k|AT&T 610; 80 column; 103key keyboard,
11690 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11691 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11692 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
11693 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
11694 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
11695 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
11696 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11697 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
11698 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
11699 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
11700 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
11701 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
11702 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
11703 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
11705 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11707 att615|AT&T 615; 80 column; 98key keyboard,
11708 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11709 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11710 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11711 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11712 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11713 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11714 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
11715 att615-w|AT&T 615; 132 column; 98key keyboard,
11716 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11717 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11718 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11719 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11720 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11721 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11722 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
11723 att615-103k|AT&T 615; 80 column; 103key keyboard,
11724 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
11725 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
11726 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
11727 # (att620: I added <rmam>/<smam> based on the init string and
11728 # <rin>/<indn> from a BSD termcap -- esr)
11729 att620|AT&T 620; 80 column; 98key keyboard,
11730 am, eslok, hs, mir, msgr, xenl, xon,
11731 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11732 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11733 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11734 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11735 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11736 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11737 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11738 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11739 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11740 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11741 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11742 indn=\E[%p1%dS, invis=\E[8m,
11743 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
11744 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
11745 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11746 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11747 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11748 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
11749 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
11750 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
11751 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
11752 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
11753 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
11754 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11755 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
11756 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11757 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11758 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11759 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
11760 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
11761 rs2=\Ec\E[?3l, sc=\E7,
11762 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
11763 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
11764 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
11765 tsl=\E7\E[25;%i%p1%dx,
11766 att620-w|AT&T 620; 132 column; 98key keyboard,
11768 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11770 att620-103k|AT&T 620; 80 column; 103key keyboard,
11771 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11772 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11773 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
11774 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
11775 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
11776 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
11777 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11778 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
11779 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
11780 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
11781 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
11782 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
11783 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11784 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11785 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
11786 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
11788 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
11790 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11793 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
11794 # The following SETUP modes are assumed for normal operation:
11795 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
11796 # Font_Size=Large Non-Layers_Window_Cols=80
11797 # Non-Layers_Window_Rows=60
11798 # Other SETUP modes may be set for operator convenience or communication
11799 # requirements. Some capabilities assume a printer attached to the Aux EIA
11800 # port. This termcap description is for the Fixed Non-Layers Window. No
11801 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11802 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
11803 att630|AT&T 630 windowing terminal,
11804 OTbs, am, da, db, mir, msgr, npc, xon,
11805 cols#80, it#8, lines#60, lm#0,
11806 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
11807 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11808 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11809 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11810 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11811 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11812 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
11813 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11814 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
11815 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
11816 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
11817 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
11818 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
11819 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
11820 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
11821 rmul=\E[m, rs2=\Ec, sc=\E7,
11822 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
11823 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11824 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
11825 lines#24, use=att630,
11827 # This is the att700 entry for 700 native emulation of the AT&T 700
11828 # terminal. Comments are relative to changes from the 605V2 entry and
11829 # att730 on which the entry is based. Comments show the terminfo
11830 # capability name, termcap name, and description.
11832 # Here is what's going onm in the init string:
11833 # ESC [ 50;4| set 700 native mode (really is 605)
11834 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11835 # ESC [ 53;0| set GenFlow to Xon/Xoff
11836 # ESC [ 8 ;0| set CR on NL
11837 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11838 # ESC [ ? 4 l jump scroll
11839 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11840 # ESC [ ?13 l Labels on
11841 # ESC [ ?15 l parity check = no
11842 # ESC [ 13 l monitor mode off
11843 # ESC [ 20 l LF on NL (not CRLF on NL)
11844 # ESC [ ? 7 h autowrap on
11845 # ESC [ 12 h local echo off
11846 # ESC ( B GO = ASCII
11847 # ESC ) 0 G1 = Special Char & Line Drawing
11848 # ESC [ ? 31 l Set 7 bit controls
11850 # Note: Most terminals, especially the 600 family use Reverse Video for
11851 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11852 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11853 # standout mode with \E[m (all normal attributes). The 730 entry simply
11854 # exits reverse video which would leave other current attributes intact. It
11855 # was assumed the 730 entry to be more correct so rmso has changed. The
11856 # 605V2 has no sequences to turn individual attributes off, thus its setting
11857 # and the rmso/smso settings from the 730.
11859 # Note: For the same reason as above in rmso I changed exit under-score mode
11860 # to specifically turn off underscore, rather than return to all normal
11863 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11864 # capability as pfxl. It was changed here to pfx since pfxl
11865 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11866 # allows strings to be parameters and label values must be programmed as
11867 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11868 # and strings to be parameters. The 605V2 pfx entry should be examined later
11869 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11871 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11872 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11875 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11878 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11880 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11884 # modular 10 pin Connector
11885 # Left side Right side
11886 # Pin 1 2 3 4 5 6 7 8 9 10
11888 # Key (notch) at bottom
11900 # The manual is 189 pages and is loaded with details about the escape codes,
11901 # etc..... Available from AT&T CIC 800-432-6600...
11902 # ask for Document number 999-300-660..
11904 att700|AT&T 700 24x80 column display w/102key keyboard,
11905 am, eslok, hs, mir, msgr, xenl, xon,
11906 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11907 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11908 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11909 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11910 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11911 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11912 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11913 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11914 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11915 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11916 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11917 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11918 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11919 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11920 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11921 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11922 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11923 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11924 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11925 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11926 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11927 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11928 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11929 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11930 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11931 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11932 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11933 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11934 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11935 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11936 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11937 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11938 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11939 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11940 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11941 tsl=\E7\E[99;%i%p1%dx,
11943 # This entry was modified 3/13/90 by JWE.
11944 # fixes include additions of <enacs>, correcting <rep>, and modification
11945 # of <kHOM>. (See comments below)
11946 # att730 has status line of 80 chars
11947 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11948 # the <kf25> and up keys are used for shifted system Fkeys
11949 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11950 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11951 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11952 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11953 # 102, 102+1, or 122 key keyboards
11955 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11956 att730|AT&T 730 windowing terminal,
11957 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11958 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11959 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11960 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11961 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11962 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11963 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11964 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11965 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11966 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11967 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11968 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11969 ind=\ED, invis=\E[8m,
11970 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11971 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11972 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11973 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11974 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11975 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11976 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11977 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11978 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11979 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11980 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11981 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11982 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11983 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11984 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11985 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11986 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11987 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11988 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11989 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11990 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11991 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11992 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11993 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11994 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11995 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
11996 lines#41, use=att730,
11997 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
11998 lines#24, use=att730,
11999 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12000 flash=\E[?5l$<200>\E[?5h,
12001 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
12003 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12004 lines#41, use=att730r,
12005 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12006 lines#24, use=att730r,
12008 # The following represents the screen layout along with the associated
12009 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12010 # not appear on the screen but are shown to reference the bezel buttons.
12011 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12012 # position relative to the screen.
12016 # +----------------------------------------------------------------+
12018 # XXXX | kf0 kf24 | XXXX
12021 # XXXX | kf1 kf23 | XXXX
12024 # XXXX | kf2 kf22 | XXXX
12027 # XXXX | kf3 kf21 | XXXX
12030 # XXXX | kf4 kf20 | XXXX
12033 # XXXX | kf5 kf19 | XXXX
12036 # XXXX | kf6 kf18 | XXXX
12042 # +----------------------------------------------------------------+
12044 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12046 # Note: XXXX represents the screen buttons
12052 # The character string sent by key 'kf26' may be user programmable
12053 # to send either \E[16s, or \E[26s.
12054 # The character string sent by key 'krfr' may be user programmable
12055 # to send either \E[17s, or \E[27s.
12057 # Depression of the "CMD" key sends \E! (kcmd)
12058 # Depression of the "MAIL" key sends \E[26s (kf26)
12059 # "REDRAW" same as "REFRESH" (krfr)
12061 # "kf" functions adds carriage return to output string if terminal is in
12064 # The following are functions not covered in the table above:
12066 # Set keyboard character (SKC): \EPn1;Pn2w
12067 # Pn1= 0 Back Space key
12069 # Pn2= Program char (hex)
12071 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12072 # Pn1= Window number (1-39)
12073 # Pn2-Pn5= Y;X;Y;X coordinates
12075 # Screen Selection (SSL): \E[Pnu
12076 # Pn= Window number
12078 # Set Terminal Modes (SM): \E[Pnh
12079 # Pn= 3 Graphics mode
12080 # Pn= > Cursor blink
12081 # Pn= < Enter new line mode
12082 # Pn= = Enter reverse insert/replace mode
12083 # Pn= ? Enter no scroll mode
12085 # Reset Terminal Mode (RM): \E[Pnl
12086 # Pn= 3 Exit graphics mode
12087 # Pn= > Exit cursor blink
12088 # Pn= < Exit new line mode
12089 # Pn= = Exit reverse insert/replace mode
12090 # Pn= ? Exit no scroll mode
12092 # Screen Status Report (SSR): \E[Pnp
12093 # Pn= 0 Request current window number
12094 # Pn= 1 Request current window dimensions
12096 # Device Status Report (DSR): \E[6n Request cursor position
12098 # Call Status Report (CSR): \E[Pnv
12099 # Pn= 0 Call failed
12100 # Pn= 1 Call successful
12102 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12103 # Pn1= Button number to be loaded
12104 # Pn2= Character count of "string"
12105 # Pn3= Key mode being loaded:
12109 # String= Text string (15 chars max)
12111 # Screen Number Report (SNR): \E[Pnp
12112 # Pn= Screen number
12114 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12115 # Pn1= Number of rows available in window
12116 # Pn2= Number of columns available in window
12118 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12119 # Pn1= "Y" Position of cursor
12120 # Pn2= "X" Position of cursor
12122 # Request Answer Back (RAB): \E[c
12124 # Answer Back Response (ABR): \E[?;*;30;VSV
12125 # *= 0 No printer available
12126 # *= 2 Printer available
12127 # V= Software version number
12128 # SV= Software sub version number
12129 # (printer-available field not documented in v1)
12131 # Screen Alignment Aid: \En
12133 # Bell (lower pitch): \E[x
12135 # Dial Phone Number: \EPdstring\
12136 # string= Phone number to be dialed
12138 # Set Phone Labels: \EPpstring\
12139 # string= Label for phone buttons
12141 # Set Clock: \EPchour;minute;second\
12143 # Position Clock: \EPsY;X\
12144 # Y= "Y" coordinate
12145 # X= "X" coordinate
12147 # Delete Clock: \Epr\
12149 # Programming The Function Buttons: \EPfPn;string\
12150 # Pn= Button number (00-06, 18-24)
12151 # (kf00-kf06, kf18-kf24)
12152 # string= Text to sent on button depression
12154 # The following in version 2 only:
12156 # Request For Local Directory Data: \EPp12;\
12158 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12160 # Request for Local Directory Data in print format: \EPp13;\
12162 # Enable 'Prt on Line' mode: \022 (DC2)
12164 # Disable 'Prt on Line' mode: \024 (DC4)
12168 # The following Terminfo entry describes functions which are supported by
12169 # the AT&T 5430/pt505 terminal software version 2 and later.
12170 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12172 cols#80, it#8, lines#24,
12173 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12174 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12175 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
12176 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12177 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12178 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12179 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
12180 il=\E[%p1%dL, il1=\E[L, ind=^J,
12181 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
12182 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12183 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
12184 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
12185 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
12186 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
12187 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12188 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
12189 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
12190 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
12192 # The following Terminfo entry describes functions which are supported by
12193 # the AT&T 5430/pt505 terminal software version 1.
12194 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
12196 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
12197 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
12198 lines#22, use=att505,
12200 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
12201 # This cut mark helps make life less painful for people running ncurses tic
12202 # on machines with relatively little RAM. The file can be broken in half here
12203 # cleanly and compiled in sections -- no `use' references cross this cut
12207 #### Ampex (Dialogue)
12209 # Yes, these are the same people who are better-known for making audio- and
12210 # videotape. I'm told they are located in Redwood City, CA.
12213 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
12214 # (ampex80: some capabilities merged in from SCO's entry -- esr)
12215 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
12217 cols#80, it#8, lines#24,
12218 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
12219 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12220 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
12221 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
12222 smso=\Ej, smul=\El, tbc=\E3,
12223 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
12224 ampex175|ampex d175,
12227 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12228 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12229 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
12230 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
12231 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
12232 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
12233 # No backspace key in the main QWERTY cluster. Fortunately, it has a
12234 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
12235 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
12236 # mode), this key can be used as the erase key; I find I like this. Because
12237 # some people and some systems may not, there is another termcap ("ampex175")
12238 # that suppresses this little eccentricity by omitting the relevant capability.
12239 ampex175-b|ampex d175 using left arrow for erase,
12240 kbs=^_, use=ampex175,
12241 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
12242 # (ampex210: removed obsolete ":kn#10:" -- esr)
12243 ampex210|a210|ampex a210,
12244 OTbs, am, hs, xenl,
12245 cols#80, it#8, lines#24, xmc#1,
12246 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
12247 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12248 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
12249 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
12250 if=/usr/share/tabset/std, il1=\EE, invis@,
12251 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
12252 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
12253 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
12254 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
12255 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
12256 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
12257 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
12258 # and moved the padding to be *after* the caps -- esr)
12259 ampex219|ampex-219|amp219|Ampex with Automargins,
12261 cols#80, it#8, lines#24,
12262 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
12263 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
12264 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
12265 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
12266 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
12267 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
12268 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12269 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
12270 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
12271 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
12272 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
12273 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
12274 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
12275 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
12276 cols#132, lines#24,
12277 bel=^G, cr=^M, cud1=^J, ind=^J,
12278 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
12279 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
12280 ampex232|ampex-232|Ampex Model 232,
12282 cols#80, lines#24, xmc#1,
12283 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
12284 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12285 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
12286 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
12287 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
12288 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
12289 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
12290 kf9=^AI\r, khome=^^, use=adm+sgr,
12291 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
12292 ampex232w|Ampex Model 232 / 132 columns,
12293 cols#132, lines#24,
12294 is2=\E\034Eg\El, use=ampex232,
12296 #### Ann Arbor (aa)
12298 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
12299 # numbers of function keys. At least some used monitors in portrait mode,
12300 # allowing up to 76-character screen heights! They were reachable at:
12302 # Ann Arbor Terminals
12303 # 6175 Jackson Road
12304 # Ann Arbor, MI 48103
12307 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
12308 # can't be found on the Web; I fear they're long dead. R.I.P.
12312 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
12313 # Highly modified 6/22 by Mike O'Brien.
12314 # split out into several for the various screen sizes by dave-yost@rand
12315 # Modifications made 3/82 by Mark Horton
12316 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
12317 # status line moved to top of screen, <flash> removed 5/82
12318 # Some unknown person at SCO then hacked the init strings to make them more
12321 # assumes the following setup:
12322 # A menu: 0000 1010 0001 0000
12323 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12324 # C menu: 56 66 0 0 9600 0110 1100
12325 # D menu: 0110 1001 1 0
12327 # Briefly, the settings are for the following modes:
12328 # (values are for bit set/clear with * indicating our preference
12329 # and the value used to test these termcaps)
12330 # Note that many of these settings are irrelevent to the terminfo
12331 # and are just set to the default mode of the terminal as shipped
12334 # A menu: 0000 1010 0001 0000
12335 # Block/underline cursor*
12336 # blinking/nonblinking cursor*
12337 # key click/no key click*
12338 # bell/no bell at column 72*
12340 # key pad is cursor control*/key pad is numeric
12341 # return and line feed/return for <cr> key *
12342 # repeat after .5 sec*/no repeat
12343 # repeat at 25/15 chars per sec. *
12345 # hold data until pause pressed/process data unless pause pressed*
12346 # slow scroll/no slow scroll*
12347 # Hold in area/don't hold in area*
12348 # functions keys have default*/function keys disabled on powerup
12350 # show/don't show position of cursor during page transmit*
12355 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12356 # Baud rate (9600*)
12358 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
12359 # 1 stop bit*/2 stop bits
12360 # parity error detection off*/on
12362 # keyboard local/on line*
12363 # half/full duplex*
12364 # disable/do not disable keyboard after data transmission*
12366 # transmit entire page/stop transmission at cursor*
12367 # transfer/do not transfer protected characters*
12368 # transmit all characters/transmit only selected characters*
12369 # transmit all selected areas/transmit only 1 selected area*
12371 # transmit/do not transmit line separators to host*
12372 # transmit/do not transmit page tab stops tabs to host*
12373 # transmit/do not transmit column tab stop tabs to host*
12374 # transmit/do not transmit graphics control (underline,inverse..)*
12376 # enable*/disable auto XON/XOFF control
12377 # require/do not require receipt of a DC1 from host after each LF*
12378 # pause key acts as a meta key/pause key is pause*
12386 # XON character (17*)
12387 # XOFF character (19*)
12389 # C menu: 56 66 0 0 9600 0110 1100
12390 # number of lines to print data on (printer) (56*)
12392 # number of lines on a sheet of paper (printer) (66*)
12394 # left margin (printer) (0*)
12396 # number of pad chars on new line to printer (0*)
12398 # printer baud rate (9600*)
12400 # printer parity: 00=odd,01=even*,10=space,11=mark
12401 # printer stop bits: 2*/1
12402 # print/do not print guarded areas*
12404 # new line is: 01=LF,10=CR,11=CRLF*
12408 # D menu: 0110 1001 1 0
12409 # LF is newline/LF is down one line, same column*
12410 # wrap to preceding line if move left from col 1*/don't wrap
12411 # wrap to next line if move right from col 80*/don't wrap
12412 # backspace is/is not destructive*
12414 # display*/ignore DEL character
12415 # display will not/will scroll*
12416 # page/column tab stops*
12417 # erase everything*/erase unprotected only
12419 # editing extent: 0=display,1=line*,2=field,3=area
12424 annarbor4080|aa4080|ann arbor 4080,
12427 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
12428 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
12429 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
12430 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
12432 # Strange Ann Arbor terminal from BRL
12433 aas1901|Ann Arbor K4080 w/S1901 mod,
12436 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
12437 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
12440 # If you're using the GNU termcap library, add
12441 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
12442 # to these capabilities. This is the nonstandard GNU termcap scrolling
12443 # capability, arguments are:
12444 # 1. Total number of lines on the screen.
12445 # 2. Number of lines above desired scroll region.
12446 # 3. Number of lines below (outside of) desired scroll region.
12447 # 4. Total number of lines on the screen, the same as the first parameter.
12448 # The generic Ann Arbor entry is the only one that uses this.
12449 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
12450 OTbs, am, km, mc5i, mir, xon,
12452 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12453 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
12454 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
12455 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12456 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12457 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12458 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
12459 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
12460 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
12461 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12462 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
12463 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
12464 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
12465 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
12466 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
12467 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
12468 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
12469 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12470 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
12471 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
12472 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
12474 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
12475 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12476 vpa=\E[%p1%{1}%+%dd,
12478 aaa+rv|ann arbor ambassador in reverse video,
12479 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
12480 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12481 rs1=\E[H\E[7m\E[J$<156>,
12482 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
12483 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
12484 # Ambassador with the DEC option, for partial vt100 compatibility.
12485 aaa+dec|ann arbor ambassador in dec vt100 mode,
12486 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
12487 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
12488 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
12490 aaa-18|ann arbor ambassador/18 lines,
12492 is2=\E7\E[60;0;0;18p\E8,
12493 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
12495 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
12496 use=aaa+rv, use=aaa-18,
12497 aaa-20|ann arbor ambassador/20 lines,
12499 is2=\E7\E[60;0;0;20p\E8,
12500 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
12502 aaa-22|ann arbor ambassador/22 lines,
12504 is2=\E7\E[60;0;0;22p\E8,
12505 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
12507 aaa-24|ann arbor ambassador/24 lines,
12509 is2=\E7\E[60;0;0;24p\E8,
12510 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
12512 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
12513 use=aaa+rv, use=aaa-24,
12514 aaa-26|ann arbor ambassador/26 lines,
12516 is2=\E7\E[60;0;0;26p\E8,
12517 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
12518 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
12519 aaa-28|ann arbor ambassador/28 lines,
12521 is2=\E7\E[60;0;0;28p\E8,
12522 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
12523 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
12524 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
12527 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12528 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
12529 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
12530 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
12531 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12532 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
12533 use=aaa+rv, use=aaa-30-s,
12534 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
12535 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12536 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
12537 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
12538 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12539 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
12540 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
12542 is2=\E7\E[60;0;0;30p\E8,
12543 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
12544 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
12545 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
12546 use=aaa+rv, use=aaa-30,
12547 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
12548 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12550 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
12551 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12552 use=aaa+rv, use=aaa-30,
12553 aaa-36|ann arbor ambassador/36 lines,
12555 is2=\E7\E[60;0;0;36p\E8,
12556 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
12557 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
12558 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
12559 use=aaa+rv, use=aaa-36,
12560 aaa-40|ann arbor ambassador/40 lines,
12562 is2=\E7\E[60;0;0;40p\E8,
12563 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
12564 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
12565 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
12566 use=aaa+rv, use=aaa-40,
12567 aaa-48|ann arbor ambassador/48 lines,
12569 is2=\E7\E[60;0;0;48p\E8,
12570 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
12571 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
12572 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
12573 use=aaa+rv, use=aaa-48,
12574 aaa-60-s|ann arbor ambassador/59 lines+status,
12577 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12578 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
12579 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12580 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
12581 use=aaa+rv, use=aaa-60-s,
12582 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
12583 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
12584 aaa-60|ann arbor ambassador/60 lines,
12586 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
12588 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
12589 use=aaa+rv, use=aaa-60,
12590 aaa-db|ann arbor ambassador 30/destructive backspace,
12592 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
12594 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
12596 flash=\E[>59h$<100>\E[>59l,
12597 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
12598 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
12599 guru+rv|guru changes for reverse video,
12600 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
12601 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
12602 use=guru+rv, use=guru-33,
12603 guru+s|guru status line,
12605 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
12606 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
12607 tsl=\E[>51h\E[1;%p1%dH\E[2K,
12608 guru-nctxt|guru with no saved context,
12609 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
12610 guru-s|guru-33-s|ann arbor guru/33 lines+status,
12612 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
12613 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12614 guru-24|ann arbor guru 24 lines,
12616 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
12618 guru-44|ann arbor guru 44 lines,
12620 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
12622 guru-44-s|ann arbor guru/44 lines+status,
12624 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
12625 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12626 guru-76|guru with 76 lines by 89 cols,
12628 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
12630 guru-76-s|ann arbor guru/76 lines+status,
12632 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
12633 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12634 guru-76-lp|guru-lp|guru with page bigger than line printer,
12635 cols#134, lines#76,
12636 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
12638 guru-76-w|guru 76 lines by 178 cols,
12639 cols#178, lines#76,
12640 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
12642 guru-76-w-s|ann arbor guru/76 lines+status+wide,
12643 cols#178, lines#75,
12644 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
12645 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12646 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
12647 cols#178, lines#76,
12648 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
12650 aaa-rv-unk|ann arbor unknown type,
12651 lh#0, lw#0, nlab#0,
12652 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
12653 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12655 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
12656 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
12658 #### Applied Digital Data Systems (adds)
12660 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
12661 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
12662 # terminals was merged again. Then AT&T sold the terminal business to
12663 # SunRiver, which later changed its name to Boundless Technologies. The
12664 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
12665 # as of early 1995) are at:
12667 # Boundless Technologies
12668 # 100 Marcus Boulevard
12669 # Hauppauge, NY 11788-3762
12670 # Vox: (800)-231-5445
12671 # Fax: (516)-342-7378
12672 # Web: http://boundless.com
12674 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
12675 # In 1995 Boundless acquired DEC's terminals business.
12678 # Regent: lowest common denominator, works on all regents.
12679 # (regent: renamed ":bc:" to ":le:" -- esr)
12680 regent|Adds Regent Series,
12683 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
12684 home=\EY\s\s, ind=^J, ll=^A,
12685 # Regent 100 has a bug where if computer sends escape when user is holding
12686 # down shift key it gets confused, so we avoid escape.
12687 regent100|Adds Regent 100,
12690 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
12691 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
12692 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
12693 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
12694 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
12695 regent20|Adds Regent 20,
12696 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
12698 regent25|Adds Regent 25,
12699 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
12701 regent40|Adds Regent 40,
12703 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
12704 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12705 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
12706 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
12707 smul=\E0`, use=regent25,
12708 regent40+|Adds Regent 40+,
12709 is2=\EB, use=regent40,
12710 regent60|regent200|Adds Regent 60,
12711 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
12712 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
12714 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
12715 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
12716 viewpoint|addsviewpoint|adds viewpoint,
12719 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
12720 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
12721 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
12722 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
12723 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
12724 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
12725 # Some viewpoints have bad ROMs that foo up on ^O
12726 screwpoint|adds viewpoint with ^O bug,
12727 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
12729 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
12730 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
12731 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
12732 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
12733 # invis=01000100 and %c is the logical or of desired attributes.
12734 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
12736 # Update by TD - 2004:
12738 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
12740 # COMMANDS ASCII CODE
12742 # Address, Absolute ESC,=,row,column
12744 # Aux Port Enable ESC,@
12745 # Aux Port Disable ESC,A
12749 # Cursor forward FF
12752 # Cursor supress ETB
12753 # Cursor enable CAN
12754 # Erase to end of line ESC,T
12755 # Erase to end of page ESC,Y
12758 # Keyboard unlock SO
12759 # Read current cursor position ESC,?
12760 # Set Attribute ESC,0,x (see below for values of x)
12761 # Tag bit reset ESC,(
12762 # Tag bit set ESC,)
12763 # Transparent Print on ESC,3
12764 # Transparent Print off ESC,4
12770 # Half Intensity A 0101
12772 # Half Intensity Blinking C 0103
12773 # Reverse Video P 0120
12774 # Reverse Video Half Intensity Q 0121
12775 # Reverse Video Blinking R 0122
12776 # Reverse Video Half Intensity
12778 # Underlined ` 0140
12779 # Underlined Half Intensity a 0141
12780 # Underlined Blinking b 0142
12781 # Underlined Half Intensity
12783 # Video suppress D 0104
12784 vp3a+|viewpoint3a+|adds viewpoint 3a+,
12786 cols#80, it#8, lines#24,
12787 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
12788 cub1=^H, cud1=^J, cuf1=^L,
12789 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
12790 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
12791 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
12792 nel=^M^J, rev=\E0P\E), rmso=\E(,
12793 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
12794 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
12795 vp60|viewpoint60|addsvp60|adds viewpoint60,
12798 # adds viewpoint 90 - from cornell
12799 # Note: emacs sends ei occasionally to insure the terminal is out of
12800 # insert mode. This unfortunately puts the viewpoint90 IN insert
12801 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
12802 # - :ei=:im=: must be present in the termcap translation.)
12803 # - <xhp> indicates glitch that attributes stick to location
12804 # - <msgr> means it's safe to move in standout mode
12805 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12807 # Function key and label capabilities merged in from SCO.
12808 vp90|viewpoint90|adds viewpoint 90,
12809 OTbs, bw, msgr, xhp,
12811 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
12812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
12813 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
12814 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
12815 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
12816 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12817 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
12818 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
12819 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
12820 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
12821 # Note: if return acts weird on a980, check internal switch #2
12822 # on the top chip on the CONTROL pc board.
12823 adds980|a980|adds consul 980,
12826 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
12827 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12828 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12829 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12830 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12832 #### C. Itoh Electronics
12834 # As of 1995 these people no longer make terminals (they're still in the
12835 # printer business). Their terminals were all clones of the DEC VT series.
12836 # They're located in Orange County, CA.
12839 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12840 # the delay times and do an auto tab set rather than the indirect
12841 # file used in vt100.
12842 cit80|cit-80|citoh 80,
12845 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12846 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12847 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12848 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12849 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12850 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12851 cit101|citc|C.itoh fast vt100,
12854 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12855 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12856 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12857 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12858 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12859 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12860 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12861 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12863 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12864 # The following termcap entry was created from the Callan cd100 entry. The
12865 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12866 # full selection of combinations of reverse video, underline, and blink.
12867 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12868 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12869 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12870 cit101e|C. Itoh CIT-101e,
12871 OTbs, OTpt, am, mir, msgr,
12872 cols#80, it#8, lines#24,
12873 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12874 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12875 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12876 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12877 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12878 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12879 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12880 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12881 smkx=\E=, smso=\E[7m, smul=\E[4m,
12882 # From: David S. Lawyer, June 1997:
12883 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12884 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12885 # late 1980's CIT Terminals went out of business.
12886 # There is no need to use the initialization string is=... (by invoking
12887 # tset or setterm etc.) provided that the terminal has been manually set
12888 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12889 # compatible it should be in ANSI mode (not VT52). A set-up that
12890 # works is to set all the manually setable stuff to factory defaults
12891 # by pressing ^D in set-up mode. Then increse the brighness with the
12892 # up-arrow key since the factory default will likely be dim on an old
12893 # terminal. Then change any options you want (provided that they are
12894 # compatible with the termcap). For my terminal I set: Screen
12895 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12896 # on. I also set up mine for parity (but you may not need it). Then
12897 # save the setup with ^S.
12898 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12899 cit101e-rv|Citoh CIT-101e (sets reverse video),
12900 am, eo, mir, msgr, xenl, xon,
12901 cols#80, it#8, lines#24,
12902 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12903 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12904 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12905 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12906 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12907 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12908 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12909 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12910 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12911 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12912 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12913 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12914 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12915 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12916 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12917 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12918 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12919 cit101e-n|CIT-101e w/o am,
12921 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12923 cit101e-132|CIT-101e with 132 cols,
12925 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12926 cit101e-n132|CIT-101e with 132 cols w/o am,
12929 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12931 # CIE Terminals CIT-500 from BRL
12932 # The following SET-UP modes are assumed for normal operation:
12933 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12934 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12935 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12936 # Other SET-UP modes may be set for operator convenience or communication
12938 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12939 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12940 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12941 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12942 cit500|CIE Terminals CIT-500,
12943 OTbs, OTpt, mir, msgr, xon,
12944 OTkn#10, cols#80, it#8, lines#64, vt#3,
12945 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12946 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12947 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12948 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12949 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12950 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12951 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12952 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12953 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12954 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12955 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12956 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12957 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12958 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12959 rmso=\E[m, rmul=\E[m,
12960 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12961 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12962 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12964 # C. Itoh printers begin here
12965 citoh|ci8510|8510|c.itoh 8510a,
12968 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12969 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12971 citoh-pica|citoh in pica,
12972 is1=\EN, use=citoh,
12973 citoh-elite|citoh in elite,
12976 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12978 citoh-comp|citoh in compressed,
12981 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12983 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12984 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12986 is1=\EP, use=citoh,
12987 citoh-6lpi|citoh in 6 lines per inch mode,
12988 is3=\EA, use=citoh,
12989 citoh-8lpi|citoh in 8 lines per inch mode,
12991 is3=\EB, use=citoh,
12993 #### Control Data (cdc)
12996 cdc456|cdc 456 terminal,
12999 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13000 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13001 el=^V, home=^Y, il1=\EL, ind=^J,
13003 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13007 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13008 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13009 kcuu1=^W, khome=^Y,
13010 cdc721ll|CDC Vikingll,
13012 cols#132, lines#24,
13013 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13014 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13015 kcuu1=^W, khome=^Y,
13016 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13020 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13021 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13022 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
13024 # The following switch/key settings are assumed for normal operation:
13025 # 96 chars SCROLL FULL duplex not BLOCK
13026 # Other switches may be set according to communication requirements.
13027 # Insert/delete-character cannot be used, as the whole display is affected.
13028 # "so" & "se" are commented out until jove handles "sg" correctly.
13031 OTkn#10, cols#80, lines#24,
13032 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13033 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13034 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
13035 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13036 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13037 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13038 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13039 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13040 rs1=\031\030\002\003\017,
13042 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13044 # Part of the long initialization string defines the "DOWN" key to the left
13045 # of the tab key to send an ESC. The real ESC key is positioned way out
13048 # The termcap won't work in 132 column mode due to the way it it moves the
13049 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13050 # handle the 721 in 132 column mode.
13052 # (cdc721: changed :ri: to :sr: -- esr)
13053 cdc721-esc|Control Data 721,
13054 OTbs, OTpt, am, bw, msgr, xon,
13055 OTkn#10, cols#80, it#8, lines#30,
13056 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13057 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13058 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13059 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13060 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
13061 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13062 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13063 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13064 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13065 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
13066 smso=^^D, smul=^\, tbc=^^^RY,
13070 # Getronics is a Dutch electronics company that at one time was called
13071 # `Geveke' and made async terminals; but (according to the company itself!)
13072 # they've lost all their documentation on the command set. The hardware
13073 # documentation suggests the terminals were actually manufactured by a
13074 # Taiwanese electronics company named Cal-Comp. There are known
13075 # to have been at least two models, the 33 and the 50.
13078 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13079 # screen resolution, a larger screen, at least 1 page of memory above and
13080 # below the screen, apparently pages of memory right and left of the screen
13081 # which can be panned, and about 75 function keys (15 function keys x normal,
13082 # shift, control, func A, func B). It also has more setup possibilities than
13083 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13086 # The vt100 emulation works as is. The entry below describes the rather
13087 # non-conformant (but more featureful) ANSI mode.
13089 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13090 visa50|geveke visa 50 terminal in ansi 80 character mode,
13093 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13094 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
13095 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13096 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13097 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13098 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13099 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
13100 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13101 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
13102 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13103 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13104 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
13105 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13106 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13107 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13108 lf3=A insert line, lf4=A delete line, lf5=A clear,
13109 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13110 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
13111 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13112 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13113 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13116 #### Human Designed Systems (Concept)
13118 # Human Designed Systems
13120 # King of Prussia, PA 19406
13121 # Vox: (610)-277-8300
13122 # Fax: (610)-275-5739
13123 # Net: support@hds.com
13125 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13126 # the character-terminal business now (1995) and making X terminals. In
13127 # particular, the whole `Concept' line described here was discontinued long
13131 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13132 # Extensive changes to c108 by arpavax:eric Feb 1982
13133 # Some unknown person at SCO then translated it to terminfo.
13135 # There seem to be a number of different versions of the C108 PROMS
13136 # (with bug fixes in its Z-80 program).
13138 # The first one that we had would lock out the keyboard of you
13139 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13140 # Try that on your C108 and see if it sends a ^S when you type it.
13141 # If so, you have an old version of the PROMs.
13143 # You should configure the C108 to send ^S/^Q before running this.
13144 # It is much faster (at 9600 baud) than the c100 because the delays
13146 # new status line display entries for c108-8p:
13147 # <is3> - init str #3 - setup term for status display -
13148 # set programmer mode, select window 2, define window at last
13149 # line of memory, set bkgnd stat mesg there, select window 0.
13151 # <tsl> - to status line - select window 2, home cursor, erase to
13152 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13154 # <fsl> - from status line - 1/2 bright off, select window 0
13156 # <dsl> - disable status display - set bkgnd status mesg with
13159 # There are probably more function keys that should be added but
13160 # I don't know what they are.
13162 # No delays needed on c108 because of ^S/^Q handshaking
13164 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
13165 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
13166 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
13167 c108-4p|concept108-4p|concept 108 w/4 pages,
13168 OTbs, eslok, hs, xon,
13170 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
13171 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
13172 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
13173 ind=^J, is1=\EK\E!\E F,
13174 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
13175 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
13176 smcup=\EU\Ev 8p\Ep\r\E\025,
13177 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
13178 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
13179 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
13181 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
13182 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
13184 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
13186 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
13187 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
13190 # These have only window relative cursor addressing, not screen
13191 # relative. To get it to work right here, smcup/rmcup (which
13192 # were invented for the concept) lock you into a one page
13193 # window for screen style programs.
13195 # To get out of the one page window, we use a clever trick:
13196 # we set the window size to zero ("\Ev " in rmcup) which the
13197 # terminal recognizes as an error and resets the window to all
13200 # This trick works on c100 but does not on c108, sigh.
13202 # Some tty drivers use cr3 for concept, others use nl3, hence
13203 # the delays on cr and ind below. This padding is only needed at
13204 # 9600 baud and up. One or the other is commented out depending on
13205 # local conventions.
13207 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
13208 # less than 6 but more than 2 will work.
13210 # Note: can't use function keys f7-f10 because they are
13211 # indistinguishable from arrow keys (!), also, del char and
13212 # clear eol use xon/xoff so they probably won't work very well.
13214 # Also note that we don't define insrt/del char/delline/eop/send
13215 # because they don't transmit unless we reset them - I figured
13216 # it was a bad idea to clobber their definitions.
13218 # The <mc5> sequence changes the escape character to ^^ so that
13219 # escapes will be passed through to the printer. Only trouble
13220 # is that ^^ won't be - ^^ was chosen to be unlikely.
13221 # Unfortunately, if you're sending raster bits through to be
13222 # plotted, any character you choose will be likely, so we lose.
13224 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
13225 # cannot be # in is2 because it will hang a c100 with no printer
13227 c100|concept100|concept|c104|c100-4p|hds concept 100,
13228 OTbs, am, eo, mir, ul, xenl,
13229 cols#80, lines#24, pb#9600, vt#8,
13230 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
13231 cub1=^H, cud1=^J, cuf1=\E=,
13232 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
13233 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
13234 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
13235 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
13237 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
13238 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
13239 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
13240 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
13241 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
13242 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
13243 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
13244 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
13245 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
13246 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
13247 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
13248 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
13249 smso=\ED, smul=\EG,
13250 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
13251 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
13252 smso=\EE, use=c100,
13253 oc100|oconcept|c100-1p|old 1 page concept 100,
13257 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
13258 # Lots of notes, originally inline, but ncurses doesn't grok that.
13260 # am: not available in power on mode, but turned on with \E[=107;207h in
13261 # is2=. Also, \E=124l in is2= could have been used to prevent needing
13262 # to specify xenl:, but that would have rendered the last space on the
13263 # last line useless.
13264 # bw: Not available in power on mode, but turned on with \E[=107;207h in
13266 # clear: Could be done with \E[2J alone, except that vi (and probably most
13267 # other programs) assume that this also homes the cursor.
13268 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
13269 # scroll the window, and go back to window 1.
13270 # is2: the string may cause a warning to be issued by tic that it
13271 # found a very long line and that it suspects that a comma is missing
13272 # somewhere. This warning can be ignored (unless it comes up more than
13273 # once). The initialization string contains the following commands:
13275 # [Setup mode items changed from factory defaults:]
13276 # \E)0 set alternate character set to
13278 # ^O set character set to default
13279 # [In case it wasn't]
13280 # \E[m turn off all attributes
13281 # [In case they weren't off]
13282 # \E[=107; cursor wrap and
13283 # 207h character wrap on
13284 # \E[90;3u set Fkey definitions to "transmit"
13286 # \E[92;3u set cursor key definitions to
13287 # "transmit" defaults
13288 # \E[43;1u set shift F13 to transmit...
13290 # \E[44;1u set shift F14 to transmit...
13292 # \E[45;1u set shift F15 to transmit...
13294 # \E[46;1u set shift F16 to transmit...
13296 # \E[200;1u set shift up to transmit...
13298 # \E[201;1u set shift down to transmit...
13300 # \E[202;1u set shift right to transmit...
13302 # \E[203;1u set shift left to transmit...
13304 # \E[204;1u set shift home to transmit...
13306 # \E[212;1u set backtab to transmit...
13308 # \E[213;1u set shift backspace to transmit...
13310 # \E[214;1u set shift del to transmit...
13312 # [Necessary items not mentioned in setup mode:]
13313 # \E[2!w move to window 2
13314 # \E[25;25w define window as line 25 of memory
13315 # \E[!w move to window 1
13316 # \E[2*w show current line of window 2 as
13318 # \E[2+x set meta key to use high bit
13319 # \E[;3+} move underline to bottom of character
13321 # All Fkeys are set to their default transmit definitions with \E[90;3u
13322 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
13323 # setting MUST be redefined or deactivated, because the default is
13324 # contained in almost all of this terminal's Fkey strings! If for some
13325 # reason "quit" cannot be altered, the Fkeys can, but it would be
13326 # necessary to change ^| to ^] in all of these definitions, and add
13327 # \E[2;029!t to is2.
13328 # lines: is set to 24 because this terminal refuses to treat the 25th
13330 # ll: Not available in power on mode, but turned on with \E[=107;207h in
13332 # lm: Pointless, given that this definition locks a single screen of
13333 # memory into view, but what the hey...
13334 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
13335 # other attributes alone), but some programs expect this to turn off
13337 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
13338 # attributes alone), but some programs expect this to turn off
13340 # sgr: Attributes are set on this terminal with the string \E[ followed by
13341 # a list of attribute code numbers (in decimal, separated by
13342 # semicolons), followed by the character m. The attribute code
13345 # 2 for dim (which is ignored in power on mode);
13349 # 8 for not displayable; and
13350 # =99 for protected (except that there are strange side
13351 # effects to protected characters which make them inadvisable).
13352 # The mapping of terminfo parameters to attributes is as follows:
13353 # %p1 (standout) = bold and inverse together;
13354 # %p2 (underline) = underline;
13355 # %p3 (reverse) = inverse;
13356 # %p4 (blink) = blinking;
13357 # %p5 (dim) is ignored;
13358 # %p6 (bold) = bold;
13359 # %p7 (invisible) = not displayable;
13360 # %p8 (protected) is ignored; and
13361 # %p9 (alt char set) = alt char set.
13362 # The code to do this is:
13364 # %?%p1%p6%O IF (standout; bold) OR
13365 # %t;1 THEN OUTPUT ;1
13367 # %?%p2 IF underline
13368 # %t;4 THEN OUTPUT ;4
13371 # %t;5 THEN OUTPUT ;5
13373 # %?%p1%p3%O IF (standout; reverse) OR
13374 # %t;7 THEN OUTPUT ;7
13376 # %?%p7 IF invisible
13377 # %t;8 THEN OUTPUT ;8
13380 # %?%p9 IF altcharset
13381 # %t^N THEN OUTPUT ^N
13382 # %e^O ELSE OUTPUT ^O
13384 # sgr0: Everything is turned off (including alternate character set), since
13385 # there is no way of knowing what it is that the program wants turned
13387 # smul: The "underline" attribute is reconfigurable to an overline or
13388 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
13389 # bottom of the character cell. This was done to allow for more readable
13390 # underlined characters, and to be able to distinguish between an
13391 # underlined space, an underscore, and an underlined underscore.
13392 # xenl: Terminal can be configured to not need this, but this "glitch"
13393 # behavior is actually preferable with autowrap terminals.
13395 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
13396 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
13397 # string modifies the 'O' in kf43 to kf46 to a '$'.
13399 # kcbt was originally ^I but redefined in is2=.
13400 # kHOM was \E[H originally but redefined in is2=, as were a number of
13402 # kDC was originally \177 but redefined in is2=.
13404 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
13405 # tsl: Go to window 2, then do an hpa=.
13407 #------- flash=\E[8;3!}^G\E[3;3!}
13408 #------- flash=\E[?5h$<100>\E[?5l
13409 # There are two ways to flash the screen, both of which have their drawbacks.
13410 # The first is to set the bell mode to video, transmit a bell character, and
13411 # set the bell mode back - but to what? There is no way of knowing what the
13412 # user's old bell setting was before we messed with it. Worse, the command to
13413 # set the bell mode also sets the key click volume, and there is no way to say
13414 # "leave that alone", or to know what it's set to, either.
13415 # The second way to do a flash is to set the screen to inverse video, pad for a
13416 # tenth of a second, and set it back - but like before, there's no way to know
13417 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
13418 # it that way. The point is moot anyway, since vi (and probably other
13419 # programs) assume that by defining flash=, you want the computer to use it
13420 # INSTEAD of bel=, rather than as a secondary type of signal.
13422 #------- cvvis=\E[+{
13423 # The is the power on setting, which is also as visible as the cursor
13425 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
13426 # Windowing is possible, but not defined here because it is also used to
13427 # emulate status line functions. Allowing a program to set a window could
13428 # clobber the status line or render it unusable. There is additional memory,
13429 # but screen scroll functions are destructive and do not make use of it.
13431 #------- dim= Not available in power on mode.
13432 # You have a choice of defining low intensity characters as "half bright" and
13433 # high intensity as "normal", or defining low as "normal" and high as "bold".
13434 # No matter which you choose, only one of either "half bright" or "bold" is
13435 # available at any time, so taking the time to override the default is
13438 #------- prot=\E[=0;99m
13439 # Not defined, because it appears to have some strange side effects.
13440 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13441 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13442 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
13443 # Available, but making them available to programs is inadvisable.
13444 # The code to do this is:
13445 # %?%p1%{24}%< IF ((key; 24) <;
13446 # %p1%{30}%> ((key; 30) >;
13447 # %p1%{54}%< (key; 54) <
13450 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
13451 # %t\E[ THEN OUTPUT \E[
13452 # %p1%d OUTPUT (key) as decimal
13453 # [next line applies to pfx only]
13457 # %p2%s OUTPUT (string) as string
13459 # [DEL chosen as delimiter, but could be any character]
13460 # [implied: ELSE do nothing]
13464 # Not defined since anything it might do could be done faster and easier with
13465 # either Meta-Shift-Reset or the main power switch.
13467 #------- smkx=\E[1!z
13468 #------- rmkx=\E[!z
13469 # These sequences apply to the cursor and setup keys only, not to the
13470 # numeric keypad. But it doesn't matter anyway, since making these
13471 # available to programs is inadvisable.
13472 # For the key definitions below, all sequences beginning with \E$ are
13473 # custom and programmed into the terminal via is2. \E$ also has no
13474 # meaning to any other terminal.
13476 #------- cmdch=\E[;%p1%d!t
13477 # Available, but making it available to programs is inadvisable.
13478 #------- smxon=\E[1*q
13479 # Available, but making it available to programs is inadvisable.
13480 # Terminal will send XON/XOFF on buffer overflow.
13481 #------- rmxon=\E[*q
13482 # Available, but making it available to programs is inadvisable.
13483 # Terminal will not notify on buffer overflow.
13484 #------- smm=\E[2+x
13486 # Available, but making them available to programs is inadvisable.
13489 # It's not made clear in the manuals, but based on other ansi/vt type
13490 # terminals, it's a good guess that this terminal is capable of both
13491 # "transparent print" (which doesn't copy data to the screen, and
13492 # therefore needs mc5i: specified to say so) and "auxilliary print"
13493 # (which does duplicate printed data on the screen, in which case mc4=
13494 # and mc5= should use the \E[?4i and \E[?5i strings instead).
13496 hds200|Human Designed Systems HDS200,
13497 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
13498 cols#80, it#8, lines#24, lm#0,
13499 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
13500 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
13501 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
13502 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13503 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13504 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13505 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13506 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
13507 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13508 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13510 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
13511 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
13512 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13513 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
13514 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
13515 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
13516 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
13517 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
13518 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
13519 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
13520 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
13521 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
13522 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
13523 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
13524 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
13525 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
13526 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
13527 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
13528 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13529 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
13530 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
13531 vpa=\E[%i%p1%dd, use=ansi+pp,
13533 # <ht> through <el> included to specify padding needed in raw mode.
13534 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
13535 avt-ns|concept avt no status line,
13536 OTbs, am, eo, mir, ul, xenl, xon,
13537 cols#80, it#8, lines#24, lm#192,
13538 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13539 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
13540 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13541 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
13542 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13543 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
13544 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
13545 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
13546 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
13547 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
13548 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
13549 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13550 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13551 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
13552 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13553 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
13554 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13555 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
13556 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
13558 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
13559 sgr0=\E[m\016$<1>, smacs=\017$<1>,
13560 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
13561 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13562 vpa=\E[%p1%{1}%+%dd,
13563 avt-rv-ns|concept avt in reverse video mode/no status line,
13564 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13566 avt-w-ns|concept avt in 132 column mode/no status line,
13567 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13569 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
13570 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13571 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
13573 # Concept AVT with status line. We get the status line using the
13574 # "Background status line" feature of the terminal. We swipe the
13575 # first line of memory in window 2 for the status line, keeping
13576 # 191 lines of memory and 24 screen lines for regular use.
13577 # The first line is used instead of the last so that this works
13578 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
13579 # assumes an 8 page AVT but lm isn't currently used anywhere.)
13581 avt+s|concept avt status line changes,
13584 dsl=\E[0*w, fsl=\E[1;1!w,
13585 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
13586 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
13587 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
13588 avt|avt-s|concept-avt|avt w/80 columns,
13589 use=avt+s, use=avt-ns,
13590 avt-rv|avt-rv-s|avt reverse video w/sl,
13591 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13592 use=avt+s, use=avt-ns,
13593 avt-w|avt-w-s|concept avt 132 cols+status,
13594 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13595 use=avt+s, use=avt-ns,
13596 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
13597 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13598 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
13600 #### Contel Business Systems.
13603 # Contel c300 and c320 terminals.
13604 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
13606 cols#80, lines#24, xmc#1,
13607 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13608 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13609 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
13610 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
13611 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
13612 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
13613 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
13614 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
13615 # Contel c301 and c321 terminals.
13616 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
13617 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
13620 #### Data General (dg)
13622 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
13623 # the terminals group at Data General was shut down in 1991; all these
13624 # terminals have thus been discontinued.
13626 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
13627 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
13628 # sequentially, first the unmodified key codes are listed as F1 through F15.
13629 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
13630 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
13631 # F46 through F60. This is done in the private "includes" below whose names
13632 # start with "dgkeys+".
13634 # DG terminals generally support 8 bit characters. For each of these terminals
13635 # two descriptions are supplied:
13636 # 1) A default description for 8 bits/character communications, which
13637 # uses the default DG international character set and keyboard codes.
13638 # 2) A description with suffix "-7b" for 7 bits/character communications.
13639 # This description must use the NON-DEFAULT native keyboard language.
13641 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
13642 # Ctrl/Shift fdkeys (kf34-kf44).
13644 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
13645 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
13646 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
13647 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
13648 kf11=\233011z, kf12=\233012z, kf13=\233013z,
13649 kf14=\233014z, kf15=\233000z, kf16=\233101z,
13650 kf17=\233102z, kf18=\233103z, kf19=\233104z,
13651 kf2=\233002z, kf20=\233105z, kf21=\233106z,
13652 kf22=\233107z, kf23=\233108z, kf24=\233109z,
13653 kf25=\233110z, kf26=\233111z, kf27=\233112z,
13654 kf28=\233113z, kf29=\233114z, kf3=\233003z,
13655 kf30=\233100z, kf31=\233201z, kf32=\233202z,
13656 kf33=\233203z, kf34=\233204z, kf35=\233205z,
13657 kf36=\233206z, kf37=\233207z, kf38=\233208z,
13658 kf39=\233209z, kf4=\233004z, kf40=\233210z,
13659 kf41=\233211z, kf42=\233212z, kf43=\233213z,
13660 kf44=\233214z, kf45=\233200z, kf46=\233301z,
13661 kf47=\233302z, kf48=\233303z, kf49=\233304z,
13662 kf5=\233005z, kf50=\233305z, kf51=\233306z,
13663 kf52=\233307z, kf53=\233308z, kf54=\233309z,
13664 kf55=\233310z, kf56=\233311z, kf57=\233312z,
13665 kf58=\233313z, kf59=\233314z, kf6=\233006z,
13666 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
13667 khome=\233H, kprt=\233i,
13669 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
13670 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
13671 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13672 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
13673 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
13674 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
13675 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
13676 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
13677 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
13678 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
13679 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
13680 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
13681 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
13682 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
13683 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
13684 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
13685 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
13686 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
13687 kf9=\E[009z, khome=\E[H, kprt=\E[i,
13689 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
13690 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
13691 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
13692 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
13693 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
13694 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
13695 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
13696 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
13697 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
13698 kf8=^^x, kf9=^^y, khome=^H,
13700 dgkeys+15|Private entry describing 15 DG mode special keys,
13701 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
13702 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
13703 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
13704 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
13705 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
13706 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
13707 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
13708 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
13709 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
13710 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
13711 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
13714 # Data General color terminals use the "Tektronix" color model. The total
13715 # number of colors varies with the terminal model, as does support for
13716 # attributes used in conjunction with color.
13718 # Removed u7, u8 definitions since they conflict with tack:
13719 # Preserve user-defined colors in at least some cases.
13721 # Default is ACM mode.
13722 # u8=^^F}20^^Fi^^F}21,
13724 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
13726 colors#16, ncv#53, pairs#256,
13728 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13729 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13730 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
13732 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
13735 # Video attributes are coordinated using static variables set by "sgr", then
13736 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
13737 # (D=dim, U=underline, B=blink, R=reverse.)
13738 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
13740 colors#8, ncv#16, pairs#64,
13741 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
13742 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13743 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13744 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13745 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13747 dg+color|Color info for Data General D470C terminals in ANSI mode,
13748 colors#16, ncv#53, pairs#256,
13749 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13750 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13751 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13752 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13755 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
13757 colors#8, ncv#16, pairs#64,
13759 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
13760 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
13761 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
13763 dgmode+color|Color info for Data General D470C terminals in DG mode,
13764 colors#16, pairs#256,
13765 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13766 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13769 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
13771 colors#52, ncv#53, pairs#26,
13772 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
13773 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
13774 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
13775 scp=\036RG2%p1%02X,
13777 # Colors are in the order: normal, reverse, dim, dim + reverse.
13778 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
13780 colors#52, ncv#53, pairs#26,
13781 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
13782 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
13783 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
13784 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
13786 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
13787 # Initialization string 1 sets:
13788 # ^R - vertical scrolling enabled
13789 # ^C - blinking enabled
13790 dg-generic|Generic Data General terminal in DG mode,
13793 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13794 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
13795 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
13796 smul=^T, use=dgkeys+11,
13798 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
13799 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
13800 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
13801 # maybe they were originally nuls (which would fit).
13803 dg200|data general dasher 200,
13806 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13807 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
13808 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
13809 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
13810 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
13813 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
13814 dg210|dg-ansi|Data General 210/211,
13817 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
13818 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13819 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13820 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
13821 smso=\E[7;m, smul=\E[4;m,
13822 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
13823 # courtesy of Carlos Rucalde of Vantage Software, Inc.
13824 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
13825 # I suspect the d200 function keys actually work on the dg211, check it out.)
13826 dg211|Data General d211,
13827 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13828 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13829 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13831 # dg450 from Cornell (not official)
13832 dg450|dg6134|data general 6134,
13833 cub1@, cuf1=^X, use=dg200,
13836 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13837 # having a command to move straight down from any position on the bottom line
13838 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13839 # above have both, the D210/211, for instance, has neither. We must use ANSI
13840 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13841 # backspace on all terminals. This is not so in DG mode.
13842 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13843 # grounds that there is no matching ":ml:"
13844 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13845 OTbs, am, msgr, ul,
13846 cols#80, it#8, lines#24,
13847 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13848 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13849 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13850 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13851 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13852 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13853 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13854 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13855 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13856 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13857 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13858 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13859 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13860 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13861 # Data General 605x
13862 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13863 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13864 # This also matches a posted description of something called a `Dasher 100'
13865 # so there's a dg100 alias here.
13866 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13867 dg6053-old|dg100|data general 6053,
13870 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13871 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13872 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13873 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13874 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13875 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13878 # (Some performance can be gained over the generic DG terminal type)
13879 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13881 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13883 # Like 6053, but adds reverse video and more keypad and function keys.
13884 d200|d200-dg|Data General DASHER D200,
13885 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13886 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13887 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13890 # DASHER D210 series terminals in ANSI mode.
13891 # Reverse video, no insert/delete character/line, 7 bits/character only.
13893 # Initialization string 1 sets:
13894 # <0 - scrolling enabled
13895 # <1 - blink enabled
13896 # <4 - print characters regardless of attributes
13897 d210|d214|Data General DASHER D210 series,
13900 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13901 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13902 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13903 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13904 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13905 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13906 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
13907 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13909 # DASHER D210 series terminals in DG mode.
13910 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13911 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13913 ed=^^FF, use=d200-dg,
13915 # DASHER D211 series terminals in ANSI mode.
13916 # Like the D210, but with 8-bit characters and local printer support.
13918 # Initialization string 2 sets:
13920 # 2;1 - 8 bit operations
13921 # 1;1 - 8 bit (international) keyboard language
13922 # \E(B - default primary character set (U.S. ASCII)
13923 # \E)4 - default secondary character set (international)
13924 # ^O - primary character set
13926 d211|d215|Data General DASHER D211 series,
13928 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13931 # Initialization string 2 sets:
13933 # 2;0 - 7 bit operations
13934 # 1;0 - 7 bit (native) keyboard language
13935 # \E(0 - default character set (the keyboard native language)
13936 # ^O - primary character set
13937 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13939 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13941 # Like the D210 series, but adds support for 8-bit characters.
13943 # Reset string 2 sets:
13944 # ^^N - secondary character set
13945 # ^^FS0> - 8 bit international character set
13946 # ^^O - primary character set
13947 # ^^FS00 - default character set (matching the native keyboard language)
13949 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13951 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13953 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13956 # Enhanced DG mode with changes to be more UNIX compatible.
13957 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13960 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13961 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13962 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13963 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13964 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13965 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13966 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13967 rs2=\036N\036FS0E\036O\036FS00,
13968 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13969 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13970 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13971 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13973 is3=\036Fz2, use=d216+,
13975 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13977 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13980 # DASHER D220 color terminal in ANSI mode.
13981 # Like the D470C but with fewer colors and screen editing features.
13983 # Initialization string 1 sets:
13985 # <0 - scrolling enabled
13986 # <1 - blink enabled
13987 # <4 - print characters regardless of attributes
13988 # \E[m - all attributes off
13989 # Reset string 1 sets:
13990 # \Ec - initial mode defaults (RIS)
13992 d220|Data General DASHER D220,
13994 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13995 use=dg+color8, use=d470c,
13997 d220-7b|Data General DASHER D220 in 7 bit mode,
13999 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14000 use=dg+color8, use=d470c-7b,
14002 # Initialization string 3 sets:
14003 # - default cursor (solid rectangle)
14004 # Reset string 2 sets:
14005 # ^^N - secondary character set
14006 # ^^FS0> - 8 bit international character set
14007 # ^^O - primary character set
14008 # ^^FS00 - default character set (matching the native keyboard language)
14010 d220-dg|Data General DASHER D220 color terminal in DG mode,
14012 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
14013 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14016 # DASHER D230C color terminal in ANSI mode.
14017 # Like the D220 but with minor ANSI compatibility improvements.
14019 d230c|d230|Data General DASHER D230C,
14020 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
14021 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14022 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14023 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14024 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14026 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14029 # DASHER D400/D450 series terminals.
14030 # These add intelligent features like insert/delete to the D200 series.
14032 # Initialization string 2 sets:
14033 # ^^FQ2 - default cursor (solid rectangle)
14034 # ^^FW - character protection disabled
14035 # ^^FJ - normal (80 column) mode
14036 # ^^F\^ - horizontal scrolling enabled (for alignment)
14037 # ^^FX004? - margins at columns 0 and 79
14038 # ^^F] - horizontal scrolling disabled
14039 # ^^O - primary character set
14040 # ^^FS00 - default character set (the keyboard native language)
14041 # - (should reset scrolling regions, but that glitches the screen)
14042 # Reset string 1 sets:
14043 # ^^FA - all terminal defaults except scroll rate
14044 # Reset string 2 sets:
14045 # ^^F] - horizontal scrolling disabled
14046 # ^^FT0 - jump scrolling
14048 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14050 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
14051 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
14052 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
14053 ich1=^^J, il1=^^FH,
14054 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
14055 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
14056 rs1=^^FA, rs2=\036F]\036FT0,
14057 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14058 sgr0=\017\025\035\036E\036O, smacs=^^N,
14059 vpa=\020\177%p1%c, use=d210-dg,
14061 # DASHER D410/D460 series terminals in ANSI mode.
14062 # These add a large number of intelligent terminal features.
14064 # Initialization string 1 sets:
14066 # <0 - scrolling enabled
14067 # <1 - blink enabled
14068 # <2 - horizontal scrolling enabled (for alignment)
14069 # <4 - print characters regardless of attributes
14070 # \E[5;0v - normal (80 column) mode
14071 # \E[1;1;80w - margins at columns 1 and 80
14073 # 1 - print all characters even if protected
14074 # 6 - character protection disabled
14075 # <2 - horizontal scrolling disabled
14076 # - (should reset scrolling regions, but that glitches the screen)
14078 # Initialization string 2 sets:
14080 # 3;2 - default cursor (solid rectangle)
14081 # 2;1 - 8 bit operations
14082 # 1;1 - international keyboard language
14083 # \E(B - default primary character set (U.S. ASCII)
14084 # \E)4 - default secondary character set (international)
14085 # ^O - primary character set
14087 # Reset string 1 sets:
14088 # \Ec - initial mode defaults (RIS)
14089 # \E[<2h - horizontal scrolling disabled
14091 # Reset string 2 sets:
14093 # 4;0 - jump scrolling
14094 # 2;1 - 8 bit operations
14095 # 1;1 - 8 bit (international) keyboard language
14096 # \E(B - default primary character set (U.S. ASCII)
14097 # \E)4 - default secondary character set (international)
14099 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14101 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14102 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14103 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14104 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14105 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14106 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14107 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14108 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14109 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14111 # Initialization string 2 sets:
14113 # 3;2 - default cursor (solid rectangle)
14114 # 2;0 - 7 bit operations
14115 # 1;0 - 7 bit (native) keyboard language
14116 # \E(0 - default character set (the keyboard native language)
14117 # ^O - primary character set
14119 # Reset string 2 sets:
14121 # 4;0 - jump scrolling
14122 # 2;0 - 7 bit operations
14123 # 1;0 - 7 bit (native) keyboard language
14124 # \E(0 - default character set (the keyboard native language)
14126 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
14128 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
14129 rs2=\E[4;0;2;0;1;0v\E(0,
14130 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
14131 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
14133 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
14135 enacs@, rmacs=\036FS00,
14136 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
14137 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
14140 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
14142 # Initialization string 1 sets:
14144 # <0 - scrolling enabled
14145 # <1 - blink enabled
14146 # <2 - horizontal scrolling enabled (for alignment)
14147 # <4 - print characters regardless of attributes
14148 # \E[5;1v - compressed (135 column) mode
14149 # \E[1;1;126 - margins at columns 1 and 126
14151 # 1 - print all characters even if protected
14152 # 6 - character protection disabled
14153 # <2 - horizontal scrolling disabled
14154 # - (should reset scrolling regions, but that glitches the screen)
14156 # Reset string 1 sets:
14157 # \Ec - initial mode defaults (RIS)
14158 # \E[5;1v - compressed (135 column) mode
14159 # \E[1;1;126w - margins at columns 1 and 126
14160 # \E[<2h - horizontal scrolling disabled
14162 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
14164 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14165 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
14167 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
14169 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14170 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
14172 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
14175 # These add intelligent features like scrolling regions.
14176 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
14177 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
14178 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
14179 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
14180 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
14181 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
14182 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
14183 vpa=\036FPFF%p1%2.2X,
14184 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14186 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
14188 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
14189 rs2=\036P@1\036FK\036FX0083,
14190 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
14192 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
14195 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14197 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
14199 clear=\036FG\036PH, fsl=\036F}01\022,
14200 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
14201 tsl=\036F}00\036FP%p1%2.2X18\036PG,
14202 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
14205 # Relative cursor motions are confined to the current window,
14206 # which is not what the scrolling region specification expects.
14207 # Thus, relative vertical cursor positioning must be deleted.
14208 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
14209 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
14210 cud1@, cuu1@, ll@, use=d462+,
14212 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
14214 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
14216 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
14218 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
14220 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
14223 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
14225 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
14227 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
14229 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
14231 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
14234 d430c-dg|d430-dg|Data General D430C in DG mode,
14235 use=d413-dg, use=dg+fixed,
14236 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
14237 use=d413-dg, use=dg+ccc,
14239 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
14240 use=d413-unix, use=dgunix+fixed,
14241 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
14242 use=d413-unix-w, use=dgunix+fixed,
14243 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
14244 use=d413-unix-25, use=dgunix+fixed,
14245 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
14246 use=d413-unix-s, use=dgunix+fixed,
14247 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
14248 use=d413-unix-sr, use=dgunix+fixed,
14249 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
14250 use=d413-unix, use=dgunix+ccc,
14251 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
14252 use=d413-unix-w, use=dgunix+ccc,
14253 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
14254 use=d413-unix-25, use=dgunix+ccc,
14255 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
14256 use=d413-unix-s, use=dgunix+ccc,
14257 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
14258 use=d413-unix-sr, use=dgunix+ccc,
14260 # DASHER D470C color terminal in ANSI mode.
14261 # Like the D460 but with 16 colors and without a compressed mode.
14263 # Initialization string 1 sets:
14265 # <0 - scrolling enabled
14266 # <1 - blink enabled
14267 # <2 - horizontal scrolling enabled (for alignment)
14268 # <4 - print characters regardless of attributes
14269 # \E[1;1;80w - margins at columns 1 and 80
14271 # 1 - print all characters even if protected
14272 # 6 - character protection disabled
14273 # <2 - horizontal scrolling disabled
14274 # - (should reset scrolling regions, but that glitches the screen)
14276 d470c|d470|Data General DASHER D470C,
14277 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14278 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
14279 use=dg+color, use=d460,
14281 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
14282 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14283 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
14284 use=dg+color, use=d460-7b,
14286 # Initialization string 2 sets:
14287 # ^^FQ2 - default cursor (solid rectangle)
14288 # ^^FW - character protection disabled
14289 # ^^F\^ - horizontal scrolling enabled (for alignment)
14290 # ^^FX004? - margins at columns 0 and 79
14291 # ^^F] - horizontal scrolling disabled
14292 # ^^O - primary character set
14293 # ^^FS00 - default character set (the keyboard native language)
14294 # - (should reset scrolling regions, but that glitches the screen)
14296 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
14297 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
14298 use=dgmode+color, use=d460-dg,
14300 # DASHER D555 terminal in ANSI mode.
14301 # Like a D411, but has an integrated phone.
14302 d555|Data General DASHER D555,
14304 d555-7b|Data General DASHER D555 in 7-bit mode,
14306 d555-w|Data General DASHER D555 in wide mode,
14308 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
14310 d555-dg|Data General DASHER D555 series in DG mode,
14313 # DASHER D577 terminal in ANSI mode.
14314 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
14315 d577|Data General DASHER D577,
14317 d577-7b|Data General DASHER D577 in 7-bit mode,
14319 d577-w|Data General DASHER D577 in wide mode,
14321 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
14324 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
14327 # DASHER D578 terminal.
14328 # Like a D577, but without compressed mode; like a D470C in this respect.
14330 # Initialization string 1 sets:
14332 # <0 - scrolling enabled
14333 # <1 - blink enabled
14334 # <2 - horizontal scrolling enabled (for alignment)
14335 # <4 - print characters regardless of attributes
14336 # \E[1;1;80w - margins at columns 1 and 80
14338 # 1 - print all characters even if protected
14339 # 6 - character protection disabled
14340 # <2 - horizontal scrolling disabled
14341 # - (should reset scrolling regions, but that glitches the screen)
14343 d578|Data General DASHER D578,
14344 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
14345 d578-7b|Data General DASHER D578 in 7-bit mode,
14346 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
14348 #### Datamedia (dm)
14350 # Datamedia was headquartered in Nashua, New Hampshire until it went
14351 # out of business in 1993, but the ID plates on the terminals referred
14352 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
14353 # manufacturer which threw out all information about the terminals.
14356 cs10|colorscan|Datamedia Color Scan 10,
14359 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14360 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14361 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14362 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
14363 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14364 cs10-w|Datamedia Color Scan 10 with 132 columns,
14366 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
14368 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
14369 dm1520|dm1521|datamedia 1520,
14371 cols#80, it#8, lines#24,
14372 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
14373 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14374 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
14376 # dm2500: this terminal has both <ich> and <smir>. Applications using
14377 # termcap/terminfo directly (rather than through ncurses) might be confused.
14378 dm2500|datamedia2500|datamedia 2500,
14381 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
14382 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
14383 dch1=\020\010\030\035$<10*>,
14384 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
14385 ich1=\020\034\030\035$<10*>,
14386 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
14387 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
14388 smdc=^P, smir=^P, smso=^N,
14389 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
14390 # also, has a meta-key.
14391 # From: <goldberger@su-csli.arpa>
14392 # (dmchat: ":MT:" changed to ":km:" -- esr)
14393 dmchat|dmchat version of datamedia 2500,
14395 dl1=\020\032\030\035$<2/>,
14396 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
14397 # (dm3025: ":MT:" changed to ":km:" -- esr)
14398 dm3025|datamedia 3025a,
14400 cols#80, it#8, lines#24,
14401 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14402 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
14403 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
14404 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
14405 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
14406 smir=\EP, smso=\EO1,
14407 dm3045|datamedia 3045a,
14408 OTbs, am, eo, km@, ul, xenl,
14409 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
14410 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
14411 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
14412 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
14414 # Datamedia DT80 soft switches:
14415 # 1 0=Jump 1=Smooth
14416 # Autorepeat 0=off 1=on
14417 # Screen 0=Dark 1=light
14418 # Cursor 0=u/l 1=block
14420 # 2 Margin Bell 0=off 1=on
14421 # Keyclick 0=off 1=on
14422 # Ansi/VT52 0=VT52 1=Ansi
14423 # Xon/Xoff 0=Off 1=On
14425 # 3 Shift3 0=Hash 1=UK Pound
14427 # Newline 0=Off 1=On
14428 # Interlace 0=Off 1=On
14430 # 4 Parity 0=Odd 1=Even
14431 # Parity 0=Off 1=On
14432 # Bits/Char 0=7 1=8
14433 # Power 0=60Hz 1=50Hz
14435 # 5 Line Interface 0=EIA 1=Loop
14436 # Aux Interface 0=EIA 1=Loop
14437 # Local Copy 0=Off 1=On
14440 # 6 Aux Parity 0=Odd 1=Even
14441 # Aux Parity 0=Off 1=On
14442 # Aux Bits/Char 0=7 1=8
14443 # CRT Saver 0=Off 1=On
14444 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
14445 dm80|dmdt80|dt80|datamedia dt80/1,
14446 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
14447 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14448 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
14449 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14451 # except in 132 column mode, where it needs a little padding.
14452 # This is still less padding than the vt100, and you can always turn on
14453 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
14455 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
14457 clear=\E[H\E[2J$<50/>, cud1=^J,
14458 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
14459 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
14460 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
14461 dt80-sas|Datamedia DT803/DTX for SAS usage,
14464 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
14465 bel=^G, clear=^L, cr=^M,
14466 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
14467 cub1=^H, cud1=\EB, cuf1=^\,
14468 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
14469 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
14470 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
14471 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
14472 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
14473 smso=\E$2\004, tbc=\E'0,
14475 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
14476 # These aren't end-all Excel termcaps; but do insert/delete char/line
14477 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
14478 # The naming convention has been bent somewhat, with the use of E? (where
14479 # E is for 'Excel') as # a name. This was done to distinguish the entries
14480 # from the other Datamedias in use here, and yet to associate a model of
14481 # the Excel terminals with the regular datamedia terminals that share
14482 # major characteristics.
14483 excel62|excel64|datamedia Excel 62,
14484 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14485 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14487 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
14488 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14489 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14491 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
14492 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
14493 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
14494 smir=\E[4h, use=dt80,
14498 # Falco Data Products
14499 # 440 Potrero Avenue
14500 # Sunnyvale, CA 940864-196
14501 # Vox: (800)-325-2648
14502 # Fax: (408)-745-7860
14503 # Net: techsup@charm.sys.falco.com
14505 # Current Falco models as of 1995 are generally ANSI-compatible and support
14506 # emulations of DEC VT-series, Wyse, and Televideo types.
14509 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
14510 # This terminal was released around 1983 and was discontinued long ago.
14511 # The standout and underline highlights are the same.
14512 falco|ts1|ts-1|falco ts-1,
14514 cols#80, it#8, lines#24,
14515 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14516 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14517 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
14518 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
14519 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
14520 smir=\Eq, smso=\Eg1, smul=\Eg1,
14521 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
14522 OTbs, am, da, db, mir, msgr, ul,
14523 cols#80, it#8, lines#24,
14524 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
14525 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
14526 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
14527 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
14528 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
14529 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
14530 smso=\Eg4, smul=\Eg1,
14531 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
14532 ts100|ts100-sp|falco ts100-sp,
14533 am, mir, msgr, xenl, xon,
14534 cols#80, it#8, lines#24, vt#3,
14535 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14536 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
14537 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14538 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14539 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
14540 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
14541 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
14542 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
14543 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
14544 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14545 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
14546 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
14547 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14548 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
14549 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
14550 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
14552 ts100-ctxt|falco ts-100 saving context,
14553 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
14555 #### Florida Computer Graphics
14558 # Florida Computer Graphics Beacon System, using terminal emulator program
14559 # "host.com", as provided by FCG. This description is for an early release
14560 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
14563 # From: David Bryant <cbosg!djb> 1/7/83
14564 beacon|FCG Beacon System,
14567 bel=\ESTART\r\E37\r\EEND\r$<1>,
14568 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
14569 cub1=^H, cud1=^J, cuf1=\EV,
14570 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
14571 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
14572 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
14573 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
14574 rmul=\ESTART\r\E60\,0\r\EEND\r,
14575 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
14576 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
14577 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
14578 smul=\ESTART\r\E60\,1\r\EEND\r,
14583 # The f1720a differences from ANSI: no auto margin, destructive
14584 # tabs, # of lines, funny highlighting and underlining
14585 f1720|f1720a|fluke 1720A,
14587 cols#80, lines#16, xmc#1,
14588 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
14589 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
14590 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
14591 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
14592 smso=\E[7m, smul=\E[4m,
14594 #### Liberty Electronics (Freedom)
14596 # Liberty Electronics
14597 # 48089 Fremont Blvd
14599 # Vox: (510)-623-6000
14600 # Fax: (510)-623-7021
14602 # From: <faletti@berkeley.edu>
14603 # (f100: added empty <acsc> to suppress a tic warning;
14604 # made this relative to adm+sgr -- note that <invis> isn't
14605 # known to work for f100 but does on the f110. --esr)
14606 f100|freedom|freedom100|freedom model 100,
14607 OTbs, am, bw, hs, mir, msgr, xon,
14609 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
14610 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14611 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
14612 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
14613 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
14614 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
14615 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
14616 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14617 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
14618 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
14619 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14620 f100-rv|freedom-rv|freedom 100 in reverse video,
14621 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
14622 # The f110 and f200 have problems with vi(1). They use the ^V
14623 # code for the down cursor key. When kcud1 is defined in terminfo
14624 # as ^V, the Control Character Quoting capability (^V in insert mode)
14625 # is lost! It cannot be remapped in vi because it is necessary to enter
14626 # a ^V to to quote the ^V that is being remapped!!!
14628 # f110/f200 users will have to decide whether
14629 # to lose the down cursor key or the quoting capability. We will opt
14630 # initially for leaving the quoting capability out, since use of VI
14631 # is not generally applicable to most interactive applications
14632 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
14633 f110|freedom110|Liberty Freedom 110,
14636 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
14637 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
14638 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
14639 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14640 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
14641 smso=\EG<, tsl=\Ef, use=f100,
14642 f110-14|Liberty Freedom 110 14inch,
14644 f110-w|Liberty Freedom 110 - 132 cols,
14645 cols#132, use=f110,
14646 f110-14w|Liberty Freedom 110 14in/132 cols,
14649 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
14650 f200|freedom200|Liberty Freedom 200,
14651 OTbs, am, eslok, hs, mir, msgr, xon,
14652 cols#80, it#8, lines#24, wsl#80,
14653 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
14654 clear=^Z, cnorm=\E.1, cr=^M,
14655 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
14656 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14657 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
14658 flash=\Eo$<200/>\En, fsl=^M, home=^^,
14659 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
14660 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
14661 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14662 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14663 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14664 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
14665 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14666 f200-w|Liberty Freedom 200 - 132 cols,
14667 cols#132, use=f200,
14668 # The f200 has the ability to reprogram the down cursor key. The key is
14669 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
14670 # so powering the terminal off and on will not cause the change to be lost.
14671 f200vi|Liberty Freedom 200 for vi,
14672 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
14673 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
14674 cols#132, use=f200vi,
14678 # Graphon Corporation
14679 # 544 Division Street
14680 # Campbell, CA 95008
14681 # Vox: (408)-370-4080
14682 # Fax: (408)-370-5047
14683 # Net: troy@graphon.com (Troy Morrison)
14686 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
14687 # including one odd hybrid that starts out life on power-up as a character
14688 # terminal, than can be switched to X graphics mode (driven over the serial
14689 # line) by an escape sequence. No info on this beast yet.
14690 # (go140: I added <rmam>/<smam> based on the init string -- esr)
14691 go140|graphon go-140,
14693 cols#80, it#8, lines#24,
14694 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
14695 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14696 ed=\E[J$<10/>, el=\E[K, ht=^I,
14697 if=/usr/share/tabset/vt100, il1=\E[L,
14698 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14699 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
14700 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
14701 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
14702 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
14703 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14704 go140w|graphon go-140 in 132 column mode,
14707 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14709 # Hacked up vt200 termcap to handle GO-225/VT220
14710 # From: <edm@nwnexus.WA.COM>
14711 # (go225: I added <rmam>/<smam> based on the init string -- esr)
14712 go225|go-225|Graphon 225,
14713 OTbs, am, mir, xenl,
14714 cols#80, it#8, lines#25, vt#3,
14715 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
14716 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
14717 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14718 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
14719 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
14720 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14721 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
14722 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
14723 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
14724 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
14725 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
14726 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
14728 #### Harris (Beehive)
14730 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
14731 # Their terminal group is ancient history now (1995) though the parent
14732 # company is still in business.
14735 # Beehive documentation is undated and marked Preliminary and has no figures
14736 # so we must have early Superbee2 (Model 600, according to phone conversation
14737 # with mfr.). It has proved reliable except for some missing padding
14738 # (notably after \EK and <nl> at bottom of screen).
14740 # The key idea is that AEP mode is poison for <cup> & that US's in
14741 # the local memory should be avoided like the plague. That means
14742 # that the 2048 character local buffer is used as 25 lines of 80
14743 # characters, period. No scrolling local memory, folks. It also
14744 # appears that we cannot use naked INS LINE feature since it uses
14745 # US. The sbi fakes <il1> with an 80-space insert that may be too
14746 # slow at low speeds; also spaces get converted to \040 which is
14747 # too long for some programs (not vi). DEL LINE is ok but slow.
14749 # The <nl> string is designed for last line of screen ONLY; cup to
14750 # 25th line corrects the motion inherent in scrolling to Page 1.
14752 # There is one understood bug. It is that the screen appears to
14753 # pop to a new (blank) page after a <nel>, or leave a half-line
14754 # ellipsis to a quad that is the extra 48 memory locations. The
14755 # data received is dumped into memory but not displayed. Not to
14756 # worry if <cup> is being used; the lines not displayed will be,
14757 # whenever the cursor is moved up there. Since <cup> is addressed
14758 # relative to MEMORY of window, nothing is lost; but beware of
14759 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
14760 # therefore, is setenv MORE -c .
14762 # WARNING: Not all features tested.
14764 # Timings are assembled from 3 sources. Some timings may reflect
14765 # SB2/Model 300 that were used if more conservative.
14766 # Tested on a Model 600 at 1200 and 9600 bd.
14768 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
14769 # placed on the keyboard and useless because of AEP, is made
14770 # into a backspace key. In use ESC must be pressed twice (to send)
14771 # and sending ^C must be prefixed by ESC to avoid that weird
14772 # transmit mode associated with ENTER key.
14774 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
14775 # the screen, then it has dropped into ENTER mode; hit
14776 # RESET--ONLINE--!tset.
14778 # As delivered this machine has a FATAL feature that will throw
14779 # it into that strange transmit state (SPOW) if the space bar is
14780 # hit after a CR is received, but before receiving a LF (or a
14783 # The circuits MUST be modified to eliminate the SPOW latch.
14784 # This is done by strapping on chip A46 of the I/O board; cut
14785 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
14786 # chip. This mod has been checked out on a Mod 600 of Superbee II.
14787 # With this modification absurdly high timings on cr are
14790 # NOTE WELL that the rear panel switch should be set to CR/LF,
14793 sb1|beehive superbee,
14794 OTbs, am, bw, da, db, mir, ul, xsb,
14795 cols#80, lines#25, xmc#1,
14796 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
14797 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
14798 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
14799 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
14800 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
14801 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
14802 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
14803 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
14804 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
14805 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
14806 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
14807 smso=\E_1, smul=\E_0, tbc=\E3,
14808 sbi|superbee|beehive superbee at Indiana U.,
14810 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
14812 # Alternate (older) description of Superbee - f1=escape, f2=^C.
14813 # Note: there are at least 3 kinds of superbees in the world. The sb1
14814 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
14815 # The sb3 puts garbage on the bottom of the screen when you scroll with
14816 # the switch in the back set to CRLF instead of AEP. This description
14817 # is tested on the sb2 but should work on all with either switch setting.
14818 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
14819 # the other two if you want to try to hit that tiny escape key.
14820 # This description is tricky: being able to use cup depends on there being
14821 # 2048 bytes of memory and the hairy <nl> string.
14822 superbee-xsb|beehive super bee,
14824 cols#80, it#8, lines#25,
14825 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
14826 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
14827 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14828 home=\EH, ht=^I, hts=\E1,
14829 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14830 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14831 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14832 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14833 # This loses on lines > 80 chars long, use at your own risk
14834 superbeeic|super bee with insert char,
14835 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14836 sb2|sb3|fixed superbee,
14837 xsb@, use=superbee,
14839 #### Beehive Medical Electronics
14841 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14842 # Regarding your question though; Beehive terminals weren't made by Harris.
14843 # They were made by Beehive Medical Electronics in Utah. They went out of
14844 # business in the early '80s.
14846 # (OK, then, I don't know why a couple of these say "harris beehive".)
14849 # Reports are that most of these Beehive entries (except superbee) have not
14850 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14852 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14853 beehive|bee|harris beehive,
14856 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14857 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14858 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14859 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14860 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14861 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14862 smir=\EQ, smso=\EdP, smul=\Ed`,
14863 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14864 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14865 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14866 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14867 # really care, cook up one using ^F -- esr)
14868 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14870 cols#80, it#8, lines#20,
14871 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14872 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14873 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14874 beehive4|bh4|beehive 4,
14877 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14878 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14879 # There was an early Australian kit-built computer called a "Microbee".
14880 # It's not clear whether this is for one of those or for a relative
14882 microb|microbee|micro bee series,
14884 cols#80, it#8, lines#24,
14885 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14886 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14887 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14888 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14889 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14890 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14892 # 8675, 8686, and bee from Cyrus Rahman
14893 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14894 ha8675|harris 8675,
14895 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14896 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14897 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14898 kf8=\177, kf9=\Ee, use=bee,
14899 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14901 ha8686|harris 8686,
14902 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14903 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14904 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14905 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14906 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14911 # Hazeltine appears to be out of the terminal business as of 1995. These
14912 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14913 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14917 # 450 East Pulaski Road
14918 # Greenlawn, New York 11740
14920 # As late as 1993, manuals for the terminal product line could still be
14923 # TRW Customer Service Division
14926 # Fairfield, NJ 07007-2078
14928 # They're now (1998) a subsidiary of General Electric, operating under the
14929 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14930 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14933 # Since <cuf1> is blank, when you want to erase something you
14934 # are out of luck. You will have to do ^L's a lot to
14935 # redraw the screen. h1000 is untested. It doesn't work in
14936 # vi - this terminal is too dumb for even vi. (The code is
14937 # there but it isn't debugged for this case.)
14938 hz1000|hazeltine 1000,
14941 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14943 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14944 hz1420|hazeltine 1420,
14947 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14948 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14949 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14951 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14952 # freakout with out-of-range args and tn3270. No hz since it needs to
14954 hz1500|hazeltine 1500,
14957 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14958 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14959 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14960 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14961 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14962 # h1510 assumed to be in sane escape mode. Else use h1500.
14963 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14964 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14965 # removed incorrect and overridden ":do=^J:" -- esr)
14966 hz1510|hazeltine 1510,
14969 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14970 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14971 el=\E^O, il1=\E^Z, ind=^J,
14973 # The following switch settings are assumed for normal operation:
14974 # FULL CR U/L_CASE ESCAPE
14975 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14976 # Other switches may be set for operator convenience or communication
14978 hz1520|Hazeltine 1520,
14979 OTbs, am, bw, msgr,
14981 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14982 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14983 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14984 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14985 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14986 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14987 # This version works with the escape switch off
14988 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14989 hz1520-noesc|hazeltine 1520,
14992 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14993 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
14994 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
14995 # Note: the h1552 appears to be the first Hazeltine terminal which
14996 # is not braindamaged. It has tildes and backprimes and everything!
14997 # Be sure the auto lf/cr switch is set to cr.
14998 hz1552|hazeltine 1552,
15000 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15001 lf2=red, lf3=green, use=vt52,
15002 hz1552-rv|hazeltine 1552 reverse video,
15003 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
15004 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15005 hz2000|hazeltine 2000,
15008 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
15009 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15010 il1=~\032$<6>, ind=^J, pad=\177,
15011 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15012 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15013 # to work ok. There is one problem though if one types a lot of garbage
15014 # characters very fast vi seems not able to keep up and hangs while trying
15015 # to insert. That's in insert mode while trying to insert in the middle of
15016 # a line. It might be because the Esprit doesn't have insert char and delete
15017 # char as a built in function. Vi has to delete to end of line and then
15018 # redraw the rest of the line.
15019 esprit|Hazeltine Esprit I,
15022 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
15023 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15024 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
15025 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
15026 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
15027 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
15028 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15029 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15030 esprit-am|hazeltine esprit auto-margin,
15032 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15033 # Vi it seems always wants to send a control J for "do" and it turned out
15034 # that the terminal would work somewhat if the auto LF/CR was turned off.
15035 # (hmod1: removed :dn=~^K: -- esr)
15036 hmod1|Hazeltine Modular 1,
15039 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15040 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15041 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15042 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15044 # Hazeltine Executive 80 Model 30 (1554?)
15045 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15046 # Like VT100, except for different "am" behavior.
15047 hazel|exec80|h80|he80|Hazeltine Executive 80,
15049 cols#80, it#8, lines#24, vt#3,
15050 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15051 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15052 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
15053 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15054 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15055 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15056 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15057 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15058 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15059 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15060 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15061 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15067 ibm327x|line mode IBM 3270 style,
15069 clear=^M^J, el=^M, home=^M,
15071 ibm3101|i3101|IBM 3101-10,
15074 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15075 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15076 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
15077 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
15078 ibm3151|IBM 3151 display,
15079 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15080 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15081 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15082 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15083 # removed kend, knp, kpp -TD
15084 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
15085 OTbs, am, mir, msgr,
15086 cols#80, it#8, lines#24,
15087 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
15088 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
15089 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15090 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
15091 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
15092 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
15093 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
15094 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
15095 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
15096 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
15097 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
15098 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
15099 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
15100 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
15101 rmso=\E4@, rmul=\E4@,
15102 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
15103 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
15105 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
15106 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
15107 ibm3162|IBM 3162 display,
15108 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
15109 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
15112 # This really should not use setab/setaf, but it is clear that the
15113 # original terminfo does not toggle red/blue colors as in setb/setf.
15114 ibm3164|i3164|IBM 3164,
15116 colors#8, pairs#64,
15117 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
15118 setab=\E4 %p1%{64}%+%c,
15119 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
15120 smcup=\E!9/N\E>B, use=ibm3161,
15122 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
15124 cols#80, it#8, lines#25,
15125 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15126 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15127 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15128 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15129 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
15130 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
15131 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
15132 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
15133 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
15134 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
15135 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
15136 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
15137 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
15138 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
15139 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
15140 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
15141 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
15142 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
15143 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15144 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
15145 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
15146 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
15147 rmso=\E[m, rmul=\E[m, rs2=\Ec,
15148 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
15149 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15151 ibmaed|IBM Experimental display,
15152 OTbs, am, eo, msgr,
15153 cols#80, it#8, lines#52,
15154 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
15155 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
15156 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
15157 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15158 rmso=\E0, sgr0=\E0, smso=\E0,
15159 ibm-apl|apl|IBM apl terminal simulator,
15160 lines#25, use=dm1520,
15161 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
15162 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
15163 ibmmono|IBM workstation monochrome,
15165 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
15166 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
15167 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
15168 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
15169 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
15170 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
15172 ibmega|IBM Enhanced Color Display,
15173 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15174 nel=^M^J, use=ibmmono,
15175 # This color scheme is assumed in some recent IBM terminal descriptions
15176 # (green on black, emulated on a 16-color terminal).
15177 ibm+color|IBM color definitions,
15178 colors#8, ncv#3, pairs#64,
15180 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
15181 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
15182 ibm+16color|IBM aixterm color definitions,
15183 colors#16, pairs#256,
15184 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
15185 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
15186 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15187 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15188 ibm5154|IBM 5154 Color display,
15189 colors#8, ncv@, pairs#64,
15190 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15192 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
15193 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
15195 ibmvga-c|IBM VGA display color termcap,
15196 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15197 nel=^M^J, use=ibmega-c,
15198 ibmvga|IBM VGA display,
15199 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15200 nel=^M^J, use=ibmega,
15201 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
15202 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
15204 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
15205 ibm6155|IBM 6155 Black & White display,
15206 blink@, bold@, use=ibm5151,
15207 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
15208 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
15210 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
15211 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
15213 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
15215 ibm6154|IBM 6154 Color displays,
15216 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15217 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15218 sgr0=\E[0;10m, use=ibm5154,
15219 ibm6153|IBM 6153 Black & White display,
15220 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15221 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15222 sgr0=\E[0;10m, use=ibm5151,
15223 ibm6153-90|IBM 6153 Black & White display,
15225 blink@, bold@, use=ibm5151,
15226 ibm6153-40|IBM 6153 Black & White display,
15227 cols#40, lines#12, use=ibm6153-90,
15228 ibm8512|ibm8513|IBM color VGA Terminal,
15230 cols#80, it#8, lines#25,
15231 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
15232 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
15233 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
15234 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
15235 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
15236 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
15237 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15238 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
15239 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
15240 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15241 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
15242 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
15243 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15245 hft-c|HFT with Color,
15246 colors#8, pairs#64,
15247 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
15248 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
15249 use=ibm5151, use=ibm+color,
15250 hft-c-old|HFT with Color PC850,
15251 colors#8, pairs#64,
15252 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15254 hft-old|AIWS High Function Terminal,
15257 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15258 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15259 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
15260 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
15261 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15262 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
15263 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15264 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
15265 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
15266 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
15267 ibm-system1|system1|ibm system/1 computer,
15270 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
15271 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
15273 # lft-pc850 : IBM Low Function Terminal Device
15274 # lft "supports" underline, bold, and blink in the sense that the lft code
15275 # sets all the right bits. HOWEVER, depending upon the adapter, these
15276 # attributes may or may not be supported by the device driver.
15277 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
15279 cols#80, it#8, lines#25,
15280 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15281 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
15282 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15283 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15284 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15285 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
15286 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
15287 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
15288 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
15289 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
15290 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
15291 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
15292 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
15293 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
15294 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
15295 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
15296 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
15297 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
15298 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15299 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
15300 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
15301 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
15302 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
15303 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15304 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15306 # "Megapel" refers to the display adapter, which was used with the IBM RT
15308 ibm5081|hft|IBM Megapel Color display,
15309 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
15310 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
15311 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
15314 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
15316 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
15318 ibm8514|IBM 8514/a color VGA display,
15320 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
15321 ibm8514-c|IBM 8514 color display with standout and underline,
15324 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
15325 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
15329 # AIX entries. IBM ships these with AIX 3.2.5.
15330 # -- added rc, sc based on manpage -TD
15331 # Note that we could use ibm+16color, but that is not how IBM defines this one.
15332 aixterm|IBM Aixterm Terminal Emulator,
15334 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15335 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
15336 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15337 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
15338 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
15340 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15341 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
15342 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15343 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
15344 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
15346 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
15347 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15348 tsl=\E[?%p1%dT, use=ibm6153,
15349 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
15350 acsc@, use=aixterm,
15351 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
15352 acsc@, use=aixterm-m,
15354 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
15355 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
15356 use=ibm+16color, use=aixterm,
15358 #### Infoton/General Terminal Corp.
15361 # gt100 sounds like something DEC would come out with. Let's hope they don't.
15362 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
15365 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15366 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
15367 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
15368 ind=^J, rmso=\Ea, smso=\Eb,
15372 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
15373 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
15374 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
15375 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
15376 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
15380 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
15381 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
15382 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
15386 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
15387 ed=^K, ind=^J, ll=^H^\,
15389 # The ICL6402 was actually the Kokusai Display System 6402.
15390 # The 6404 was the KDS7372 (color version of the 6402).
15392 # ICL6404 control codes follow:
15395 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15396 #ctrl-A set SOM position at cursor position
15402 #ctrl-L Cursor right
15403 #ctrl-M Carriage return
15404 #ctrl-N Disable xon/xoff to host
15405 #ctrl-O Enable xon/xoff to host
15406 #ctrl-R Enable bidirectional mode
15407 #ctrl-T Disable bidirectional mode
15408 #ctrl-V Cursor down
15409 #ctrl-Z Clear unprotected data to insert char
15410 #ctrl-^ Cursor home
15413 #ESC lead-in char for multiple character command
15415 #ESC space R execute power on sequence
15416 #ESC ! p1 p2 define scroll region:
15417 # p1 = scroll top line: 20h - 37h
15418 # p1 = scroll bottom line: 20h - 37h
15419 #ESC " unlock keyboard
15420 #ESC # lock keyboard
15421 #ESC $ Semi-graphics mode on
15422 #ESC % Semi-graphics mode off
15423 #ESC & protect mode on
15424 #ESC ' protect mode off
15425 #ESC ( write protect mode off (full intensity)
15426 #ESC ) write protect mode on (half intensity)
15428 #ESC * clear screen
15429 #ESC + clear unprotected data to insert char
15430 #ESC , clear unprotected data to half intensity spaces
15431 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
15432 # p1 = page number 0 - 3
15433 # p2 = row 20h - 7fh
15434 # p3 = column (lo) 20h - 7fh
15435 # p4 = column (hi) 20h - 21h (only 132 col)
15436 #ESC . p1 set cursor style:
15437 # p1 = 0 invisible cursor
15438 # p1 = 1 block blinking cursor
15439 # p1 = 2 block steady cursor
15440 # p1 = 3 underline blinking cursor
15441 # p1 = 4 underline steady cursor
15442 #ESC / transmit cursor location (page, row, column)
15443 #ESC 0 p1 p2 p3 p4 program edit key:
15444 # p1 = edit key code: '@'-'S', '`'-'s'
15445 # p2 p3 p4 = program data (3 bytes)
15448 #ESC 2 clear tab at cursor
15449 #ESC 3 clear all tabs
15450 #ESC 4 send unprotect line to cursor
15451 #ESC 5 send unprotect page to cursor
15452 #ESC 6 send line to cursor
15453 #ESC 7 send page to cursor
15454 #ESC 8 n set scroll mode:
15455 # n = 0 set jump scroll
15456 # n = 1 set smooth scroll
15457 #ESC 9 n control display:
15458 # n = 0 display off
15460 #ESC : clear unprotected data to null
15461 #ESC ; clear unprotected data to insert char
15464 #ESC = p1 p2 address cursor to row, column
15465 # p1 = row 20h - 7fh
15466 # p2 = column (lo) 20h - 7fh
15467 # p3 = column (hi) 20h - 21h (only 132 col)
15468 #ESC > keyclick off
15469 #ESC ? transmit cursor location (row, column)
15471 #ESC @ copy print mode on
15472 #ESC A copy print mode off
15473 #ESC B block mode on
15474 #ESC C block mode off (conversation mode)
15475 #ESC D F set full duplex
15476 #ESC D H set half duplex
15478 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
15479 # 0 = black, 1 = red, 2 = green, 3 = yellow
15480 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
15481 #ESC G n set serial field attribute (n = 30h - 3Fh)
15482 #ESC H n full graphics mode:
15483 # n = 0 exit full graphics mode
15484 # n = 1 enter full graphics mode
15487 #ESC K forward page
15489 #ESC L unformatted page print
15490 #ESC M L move window left (132 col mode only)
15491 #ESC M R move window right (132 col mode only)
15492 #ESC N set page edit (clear line edit)
15493 #ESC O set line edit (clear page edit)
15494 #ESC P formatted page print
15495 #ESC Q character insert
15497 #ESC S send message unprotected only
15498 #ESC T erase line to insert char
15499 #ESC U set monitor mode (see ESC X, ESC u)
15501 #ESC V n select video attribute mode:
15502 # n = 0 serial field attribute mode
15503 # n = 1 parallel character attribute mode
15504 #ESC V 2 n define line attribute:
15505 # n = 0 single width single height
15506 # n = 1 single width double height
15507 # n = 2 double width single height
15508 # n = 3 double width double height
15509 #ESC V 3 n select character font:
15510 # n = 0 system font
15511 # n = 1 user defined font
15512 #ESC V 4 n select screen mode:
15513 # n = 0 page screen mode
15514 # n = 1 virtual screen mode
15515 #ESC V 5 n control mouse mode:
15516 # n = 0 disable mouse
15517 # n = 1 enable sample mode
15518 # n = 2 send mouse information
15519 # n = 3 enable request mode
15520 #ESC W character delete
15521 #ESC X clear monitor mode (see ESC U, ESC u)
15522 #ESC Y erase page to insert char
15524 #ESC Z n send user/status line:
15525 # n = 0 send user line
15526 # n = 1 send status line
15527 # n = 2 send terminal ID
15528 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
15532 # 3 = blink blank (= blank)
15534 # 5 = reverse blank
15535 # 6 = reverse blink
15536 # 7 = reverse blink blank (= reverse blank)
15538 # 9 = underline blank
15539 # : = underline blink
15540 # ; = underline blink blank
15541 # < = reverse underline
15542 # = = reverse underline blank
15543 # > = reverse underline blink
15544 # ? = reverse underline blink blank
15545 # p2, p3: f/grnd, b/grnd colour
15546 # (see ESC F for colours)
15547 # use ZZ for mono, eg.
15548 # ESC [ 0 Z Z for normal
15549 # ESC [ 4 Z Z for inverse etc.
15551 #ESC \ n set page size:
15552 # n = 1 24 lines/page
15553 # n = 2 48 lines/page
15554 # n = 3 72 lines/page
15555 # n = 4 96 lines/page
15556 #ESC ] n set Wordstar mode:
15557 # n = 0 normal (KDS7372) mode
15558 # n = 1 Wordstar mode
15560 #ESC b set foreground colour screen
15562 #ESC c n enter self-test mode:
15563 # n = 0 exit self test mode
15567 # n = 4 screen display test
15568 # n = 5 main/printer port test
15569 # n = 6 mouse port test
15570 # n = 7 graphics board test
15571 # n = 8 graphics memory test
15572 # n = 9 display all 'E'
15573 # n = : display all 'H'
15574 #ESC d set background colour screen
15576 #ESC e n program insert char (n = insert char)
15577 #ESC f text CR load user status line with 'text'
15579 #ESC g display user status line on 25th line
15580 #ESC h display system status line on 25th line
15582 #ESC j reverse linefeed
15583 #ESC k n duplex/local edit mode:
15584 # n = 0 duplex edit mode
15585 # n = 1 local edit mode
15586 #ESC l n select virtual screen:
15589 #ESC m save current config to NVRAM
15590 #ESC n p1 select display screen:
15595 #ESC o p1 p2 set characters/line and attribute:
15596 # p1 = 0 80 chars/line
15598 #ESC o p1 p2 set characters/line and attribute:
15599 # p1 = 0 80 chars/line
15600 # p1 = 1 132 chars/line
15601 # p2 = 0 single width single height
15602 # p2 = 1 single width double height
15603 # p2 = 2 double width single height
15604 # p2 = 3 double width double height
15606 #ESC q insert mode on
15607 #ESC r edit mode on
15608 #ESC s send message all
15609 #ESC t erase line to null
15610 #ESC u clear monitor mode (see ESC U, ESC X)
15611 #ESC v autopage mode on
15612 #ESC w autopage mode off
15613 #ESC x p1 p2 p3 define delimiter code...
15614 #ESC y erase page to null
15616 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
15617 # p1 = starting row
15618 # p2 = starting column
15622 #ESC { p1 p2 p3 p4 configure main port
15623 # (baud, stop bits, parity, word length)
15625 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
15626 # p1 = function key code:
15627 # '1' - ';' normal f1- f11
15628 # '<' - 'F' shifted f1 - f11
15629 # p2 = program mode:
15633 # Ctrl-Y = terminator
15634 # (use Ctrl-P to escape ^P, ^Y )
15636 #ESC } p1 p2 p3 p4 configure printer port
15637 # (baud, stop bits, parity, word length)
15638 #ESC ~ send system status
15640 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
15642 # Entry is by esr going solely on above information and is UNTESTED.
15643 # This actually looks a lot like a Televideo 9xx.
15644 # This entry uses page 0 and is monochrome; I'm not brave enough to try
15645 # to make color work without a test terminal. The <am> capability is a guess.
15646 # The initialization string sets conversation mode, blinking underline cursor,
15647 # full duplex, parallel attribute mode, display user status line, white
15648 # foreground, black background, normal highlight.
15650 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
15653 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
15655 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
15656 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
15657 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
15658 hts=\E1, il1=\EE, invis=\E[1ZZ,
15659 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
15660 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
15661 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
15662 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
15663 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
15664 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
15665 rs2=\Eo1, use=icl6404,
15667 #### Interactive Systems Corp
15669 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
15670 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
15671 # bought out by Sun.
15674 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
15675 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
15676 # ":le=^_:" later overridden -- esr)
15677 intext|Interactive Systems Corporation modified owl 1200,
15679 cols#80, it#8, lines#24, xmc#1,
15680 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
15681 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
15682 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
15683 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
15684 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
15685 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
15686 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
15687 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
15689 intext2|intextii|INTERACTIVE modified owl 1251,
15691 cols#80, lines#24, xmc#0,
15692 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
15693 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15694 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15695 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
15696 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
15697 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
15698 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
15699 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
15700 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
15701 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
15702 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
15705 #### Kimtron (abm, kt)
15707 # Kimtron seems to be history, but as March 1998 these people are still
15708 # offering repair services for Kimtron equipment:
15710 # Com/Pair Monitor Service
15711 # 1105 N. Cliff Ave.
15712 # Sioux Falls, South Dakota 57103
15714 # WATS voice: 1-800/398-4946
15715 # POTS fax: +1 605/338-8709
15716 # POTS voice: +1 605/338-9650
15717 # Email: <compair@sd.cybernex.net>
15718 # Internet/Web: <http://www.com-pair.com>
15720 # Kimtron entries include (undocumented) codes for: enter dim mode,
15721 # enter bold mode, enter reverse mode, turn off all attributes.
15724 # Kimtron ABM 85 added by Dual Systems
15725 # (abm85: removed duplicated ":kd=^J:" -- esr)
15726 abm85|Kimtron ABM 85,
15727 OTbs, am, bw, msgr,
15728 cols#80, it#8, lines#24, xmc#1,
15729 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
15730 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15731 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
15732 if=/usr/share/tabset/stdcrt, il1=\EE,
15733 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
15734 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
15735 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
15736 # Kimtron ABM 85H added by Dual Systems.
15737 # Some notes about the abm85h entries:
15738 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
15739 # firmware revs prior to SP51
15740 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
15741 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
15742 # in some places and NOT software settable i.e., <is2> can't fix it)
15743 # 3) In 85h mode, the arrow keys and special functions transmit when
15744 # the terminal is in dup-edit, and work only locally in local-edit.
15745 # Vi won't swallow `del char' for instance, but <smcup> turns on
15746 # dup-edit anyway so that the arrow keys will work right. If the
15747 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
15748 # <is2>. Note that 920E mode does not have software commands to toggle
15749 # between dup and local edit, so you get whatever was set last on the
15751 # 4) <flash> attribute is nice, but seems too slow to work correctly
15753 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
15754 # are selected, the <xmc@> entry should be removed.
15755 # 6) auto new-line should be on (selectable from setup mode only)
15757 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
15758 abm85h|Kimtron ABM 85H native mode,
15761 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
15763 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
15764 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
15766 abm85e|Kimtron ABM 85H in 920E mode,
15768 bel=^G, dim=\E), flash@,
15769 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
15770 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
15771 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
15774 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
15775 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
15776 # From: <malman@bbn-vax.arpa>
15777 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
15778 kt7|kimtron model kt-7,
15780 cols#80, it#8, lines#24,
15781 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
15782 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15783 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
15784 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
15785 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
15786 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
15787 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15788 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15789 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
15790 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
15791 # other kt7 entry and the adjacent key capabilities). Removed EE which is
15792 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
15793 # but we can't figure out what.
15794 kt7ix|kimtron model kt-7 or 70 in IX mode,
15796 cols#80, it#8, lines#25,
15797 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
15798 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
15799 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15800 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
15801 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
15802 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
15803 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
15804 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15805 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15806 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
15807 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
15808 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
15810 #### Microdata/MDIS
15812 # This was a line of terminals made by McDonnell-Douglas Information Systems.
15813 # These entries come direct from MDIS documentation. I have edited them only
15814 # to move primary names of the form p[0-9] * to aliases, and to comment out
15815 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
15816 # also removed the change history; the last version indicates this is
15817 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
15820 # McDonnell Information Systems Terminal Family History
15821 # =========================================
15823 # Prism-1, Prism-2 and P99:
15824 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
15826 # Prism-4 and Prism-5:
15827 # Slightly less ancient range of Microdata terminals. Follow-on from
15828 # Prism-2, but with many enhancements. P5 has eight display pages.
15831 # A special terminal for use with library systems, primarily in Germany.
15832 # Limited numbers. Similar functionality to P5 (except attributes?).
15834 # Prism-7, Prism-8 and Prism-9:
15835 # More recent range of MDIS terminals, in which P7 and P8
15836 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15837 # The P9 has two emulation modes - P8 and ANSI - and includes a
15838 # large number of the DEC VT220 control sequences. Both
15839 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15841 # Prism-12 and Prism-14:
15842 # Latest range, functionally very similar to the P9. The P14 has a
15843 # black-on-white overscanning screen.
15845 # The terminfo definitions given here are:
15847 # p2 - Prism-2 (or Prism-1 or P99).
15849 # p4 - Prism-4 (and older P7s & P8s).
15850 # p5 - Prism-5 (or Prism-6).
15853 # p8 - Prism-8 (in national or multinational mode).
15854 # p8-w - 132 column version of p8.
15855 # p9 - Prism-9 in ANSI mode.
15856 # p9-w - 132 column version of p9.
15857 # p9-8 - Prism-9 in Prism-8 emulation mode.
15858 # p9-8-w - As p9-8, but with 132 columns.
15860 # p12 - Prism-12 in ANSI mode.
15861 # p12-w - 132 column version of p12.
15862 # p12-m - Prism-12 in MDC emulation mode.
15863 # p12-m-w - As p12-m, but with 132 columns.
15864 # p14 - Prism-14 in ANSI mode.
15865 # p14-w - 132 column version of p14.
15866 # p14-m - Prism-14 in MDC emulation mode.
15867 # p14-m-w - As p14-m, but with 132 columns.
15872 # Includes Prism-1 and basic P99 without SP or MP loaded.
15873 # The simplest form of Prism-type terminal.
15874 # Basic cursor movement and clearing operations only.
15875 # No video attributes.
15877 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15878 # value up, followed by backspace.
15880 prism2|MDC Prism-2,
15883 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15884 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15885 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15886 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15887 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15892 # Includes early versions of P7 & P8.
15893 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15895 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15896 # value up, followed by backspace.
15897 # Cursor key definitions removed because they interfere with vi and csh keys.
15899 prism4|p4|P4|MDC Prism-4,
15900 am, bw, hs, mc5i, msgr,
15901 cols#80, lines#24, wsl#72, xmc#1,
15902 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15903 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15904 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15905 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15906 fsl=^]\345, home=^A,
15907 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15908 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15909 rev=^CD, rmso=^C\s, rmul=^C\s,
15910 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15911 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15912 vpa=\013%p1%{32}%+%c,
15917 # Same definition as p4. Includes Prism-6 (not tested!).
15918 # Does not use any multi-page features.
15920 prism5|p5|P5|MDC Prism-5,
15926 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15928 # Use p4 for very early models of P7.
15929 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15931 prism7|p7|P7|MDC Prism-7,
15932 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15937 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15938 # Supports national and multinational character sets.
15940 # Alternate char set operations only work in multinational mode.
15941 # Use p4 for very early models of P8.
15942 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15943 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15945 prism8|p8|P8|MDC Prism-8,
15946 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15947 vpa=\E[%i%p1%dd, use=p4,
15949 # p8-w: Prism-8 in 132 column mode
15950 # --------------------------------
15952 # 'Wide' version of p8.
15954 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15956 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15958 is2=\E[<12h\E[<14h, use=p8,
15960 # p9: Prism-9 in ANSI mode
15961 # -------------------------
15963 # The "flagship" model of this generation of terminals.
15964 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15966 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15967 # Fixes to deal with terminal firmware bugs:
15968 # . 'ri' uses insert-line since rev index doesn't always
15969 # . 'sgr0' has extra '0' since esc[m fails
15970 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15971 # Not covered in the current definition:
15973 # . Programming Fn keys
15974 # . Graphic characters (defaults correctly to vt100)
15975 # . Padding values (sets xon)
15976 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15978 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15979 am, bw, hs, msgr, xenl, xon,
15980 cols#80, it#8, lines#24, vt#3, wsl#72,
15981 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15982 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15983 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15984 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15985 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15986 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15987 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15988 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15989 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15990 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15991 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15992 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
15993 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
15994 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
15995 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
15996 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
15997 rmso=\E[27m, rmul=\E[24m,
15998 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
16000 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16001 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16002 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16005 # p9-w: Prism-9 in 132 column mode
16006 # --------------------------------
16008 # 'Wide' version of p9.
16010 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16012 is2=\E[&p\E[<12l\E F\E[<14h,
16013 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16015 # p9-8: Prism-9 in P8 mode
16016 # ------------------------
16018 # P9 terminal in P8 emulation mode.
16019 # Similar to p8 definition.
16020 # Insertion and deletion operations possible.
16022 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16023 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16024 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16026 # p9-8-w: Prism-9 in P8 and 132 column modes
16027 # ------------------------------------------
16029 # P9 terminal in P8 emulation mode and 132 column mode.
16031 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16032 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16033 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16035 # p12: Prism-12 in ANSI mode
16036 # ---------------------------
16038 # See p9 definition.
16040 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16043 # p12-w: Prism-12 in 132 column mode
16044 # ----------------------------------
16046 # 'Wide' version of p12.
16048 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
16051 # p12-m: Prism-12 in MDC emulation mode
16052 # -------------------------------------
16054 # P12 terminal in MDC emulation mode.
16055 # Similar to p8 definition.
16056 # Insertion and deletion operations possible.
16058 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
16061 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
16062 # -------------------------------------------------------
16064 # P12 terminal in MDC emulation mode and 132 column mode.
16066 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
16069 # p14: Prism-14 in ANSII mode
16070 # ---------------------------
16072 # See p9 definition.
16074 prism14|p14|P14|MDC Prism-14 in ANSII mode,
16077 # p14-w: Prism-14 in 132 column mode
16078 # ----------------------------------
16080 # 'Wide' version of p14.
16082 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
16085 # p14-m: Prism-14 in MDC emulation mode
16086 # -------------------------------------
16088 # P14 terminal in MDC emulation mode.
16089 # Similar to p8 definition.
16090 # Insertion and deletion operations possible.
16092 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
16095 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
16096 # -------------------------------------------------------
16098 # P14 terminal in MDC emulation mode and 132 column mode.
16100 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
16103 # End of McDonnell Information Systems Prism definitions
16105 # These things were popular in the Pick database community at one time
16106 # From: George Land <georgeland@aol.com> 24 Sep 1996
16107 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
16109 cols#80, lines#24, ma#1, wsl#78, xmc#1,
16110 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
16111 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
16112 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
16113 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
16114 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
16115 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
16116 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16117 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
16118 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
16119 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
16122 #### Microterm (act, mime)
16124 # The mime1 entries refer to the Microterm Mime I or Mime II.
16125 # The default mime is assumed to be in enhanced act iv mode.
16128 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
16129 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
16130 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
16131 # since Sytek insists ^S means xoff.
16132 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
16133 act4|microterm|microterm act iv,
16136 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
16137 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
16138 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
16139 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
16140 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
16142 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
16143 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
16144 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
16145 act5|microterm5|microterm act v,
16146 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
16148 # Mimes using brightness for standout. Half bright is really dim unless
16149 # you turn up the brightness so far that lines show up on the screen.
16150 mime-fb|full bright mime1,
16151 is2=^S\E, rmso=^S, smso=^Y, use=mime,
16152 mime-hb|half bright mime1,
16153 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
16154 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
16155 # the more plausible ":do=^J:" -- esr)
16156 # uc was at one time disabled to get around a curses bug, be wary of it
16157 mime|mime1|mime2|mimei|mimeii|microterm mime1,
16159 cols#80, it#8, lines#24, vt#9,
16160 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
16161 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
16162 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
16163 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
16164 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
16165 # These termcaps (for mime2a) put the terminal in low intensity mode
16166 # since high intensity mode is so obnoxious.
16167 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
16170 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16171 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
16172 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
16173 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
16174 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
16175 smir=\EE, smso=\E\:, smul=\E6,
16176 # This is the preferred mode (but ^X can't be used as a kill character)
16177 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
16179 cols#80, it#8, lines#24,
16180 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16181 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
16182 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
16183 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
16184 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
16185 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
16186 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
16187 mime3a|mime1 emulating 3a,
16189 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
16190 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
16192 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
16194 # Wed Mar 9 18:53:21 1983
16195 # We run our terminals at 2400 baud, so there might be some timing problems at
16196 # higher speeds. The major improvements in this model are the terminal now
16197 # scrolls down and insert mode works without redrawing the rest of the line
16198 # to the right of the cursor. This is done with a bit of a kludge using the
16199 # exit graphics mode to get out of insert, but it does not appear to hurt
16200 # anything when using vi at least. If you have some users using act4s with
16201 # programs that use curses and graphics mode this could be a problem.
16202 mime314|mm314|mime 314,
16205 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
16206 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
16207 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
16208 # Microterm mime 340 from University of Wisconsin
16209 mm340|mime340|mime 340,
16211 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16212 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16213 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
16214 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
16215 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
16216 # This came from University of Wisconsin marked "astro termcap for jooss".
16217 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
16218 # also added <rmam>/<smam> based on the init string -- esr)
16219 mt4520-rv|micro-term 4520 reverse video,
16220 am, hs, msgr, xenl, xon,
16221 cols#80, it#8, lines#24, wsl#80,
16222 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
16223 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16224 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16225 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16226 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16227 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
16228 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
16229 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
16230 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
16231 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16232 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
16233 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
16234 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
16235 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
16236 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
16237 tbc=\E[g, tsl=\E[25;1H,
16239 # Fri Aug 5 08:11:57 1983
16240 # This entry works for the ergo 4000 with the following setups:
16241 # ansi,wraparound,newline disabled, xon/xoff disabled in both
16244 # WARNING!!! There are multiple versions of ERGO 4000 microcode
16245 # Be advised that very early versions DO NOT WORK RIGHT !!
16246 # Microterm does have a ROM exchange program- use it or lose big
16247 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
16248 ergo4000|microterm ergo 4000,
16251 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
16252 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16253 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
16254 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
16255 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
16256 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16257 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
16258 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
16259 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
16260 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
16265 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
16266 # For what happened to that group, see the ADDS section.
16268 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
16271 # The following vendor-supplied termcaps were captured from the Boundless
16272 # Technologies site, 8 March 1998. I removed all-upper-case names that were
16273 # identical, except for case, to lower-case ones. I also uncommented the acsc
16276 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16277 # DEC vt200/300 with color capabilities added.
16278 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16279 colors#8, pairs#64,
16280 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16282 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16283 # DEC vt200/300 with color capabilities added.
16284 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16285 colors#8, pairs#64,
16286 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16287 use=ncr260vt300wan,
16288 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16289 # DEC vt200/300 with color capabilities added.
16290 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
16291 colors#8, pairs#64,
16292 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16294 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
16295 # DEC vt200/300 with color capabilities added.
16296 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
16297 colors#8, pairs#64,
16298 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16299 use=ncr260vt300wpp,
16300 # This definition for ViewPoint supports several attributes. This means
16301 # that it has magic cookies (extra spaces where the attributes begin).
16302 # Some applications do not function well with magic cookies. The System
16303 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16304 # If supporting various attributes is not vital, 'xmc#1' and the extra
16305 # attributes can be removed.
16306 # Mapping to ASCII character set ('acsc' capability) can also be
16307 # restored if needed.
16308 ncr260vppp|NCR 2900_260 viewpoint,
16309 am, bw, hs, km, mc5i, mir, msgr, xon,
16310 cols#80, lines#24, nlab#32, xmc#1,
16311 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16312 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
16313 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
16314 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
16315 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
16316 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
16317 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
16318 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16319 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
16320 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
16321 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
16322 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
16323 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
16324 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
16325 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
16326 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
16327 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
16328 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
16329 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
16330 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
16331 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
16332 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16333 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16334 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
16335 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
16336 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
16338 cup=\Ea%i%p1%dR%p2%dC$<30>,
16339 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16340 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16342 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
16343 am, hs, mir, msgr, xenl, xon,
16344 cols#80, lines#24, nlab#32,
16345 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16346 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16347 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16348 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
16349 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16350 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16351 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16352 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16353 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16354 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
16355 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
16356 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
16357 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
16359 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16360 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16361 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
16362 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
16363 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
16364 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
16365 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16367 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16368 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
16369 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
16370 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
16371 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
16373 cup=\E[%i%p1%d;%p2%dH$<30>,
16374 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16375 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16377 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
16378 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16379 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16380 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16381 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
16382 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
16383 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16384 smkx=\E=, use=ncr260vt100an,
16385 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
16387 cup=\E[%i%p1%d;%p2%dH$<30>,
16388 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16389 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16391 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
16392 am, hs, mir, msgr, xenl, xon,
16393 cols#80, lines#24, nlab#32,
16394 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16395 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16396 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16397 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16398 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16399 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16400 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16401 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16402 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16403 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16404 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16405 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16406 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16407 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16408 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16409 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16410 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16411 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16412 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
16413 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
16414 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
16415 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
16416 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
16417 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
16418 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
16419 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
16420 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
16421 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
16422 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16424 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16425 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16426 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16427 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16429 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
16431 cup=\E[%i%p1%d;%p2%dH$<30>,
16432 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16433 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16435 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
16436 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16437 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16438 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16439 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16441 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
16443 cup=\E[%i%p1%d;%p2%dH$<30>,
16444 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16445 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16447 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
16448 am, hs, mir, msgr, xenl, xon,
16449 cols#80, lines#24, nlab#32,
16450 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16451 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16452 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16453 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16454 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16455 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16456 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16457 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16458 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16459 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16460 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16461 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16462 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16463 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16464 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16465 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16466 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16467 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16468 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
16469 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
16470 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
16471 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
16472 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
16473 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16474 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
16475 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
16476 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
16478 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16480 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16481 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16482 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16483 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16485 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
16487 cup=\E[%i%p1%d;%p2%dH$<30>,
16488 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16489 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16491 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
16492 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16493 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16494 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16495 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16497 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
16499 cup=\E[%i%p1%d;%p2%dH$<30>,
16500 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16501 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16503 # This terminfo file contains color capabilities for the Wyse325 emulation of
16504 # the NCR 2900/260C color terminal. Because of the structure of the command
16505 # (escape sequence) used to set color attributes, one of the fore/background
16506 # colors must be preset to a given value. I have set the background color to
16507 # black. The user can change this setup by altering the last section of the
16508 # 'setf' definition. The escape sequence to set color attributes is
16509 # ESC d y <foreground_color> <background_color> 1
16510 # In addition, the background color can be changed through the desk accessories.
16511 # The capablitiy 'op' sets colors to green on black (default combination).
16513 # NOTE: The NCR Unix System Administrator's Shell will not function properly
16514 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
16515 # capability and recompile if you wish to have it included.
16517 ncr260wy325pp|NCR 2900_260 wyse 325,
16518 am, bw, hs, km, mc5i, mir, msgr, xon,
16519 colors#16, cols#80, lines#24, ncv#33, nlab#32,
16520 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16521 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
16522 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16523 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16524 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16525 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
16526 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16527 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16528 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16529 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
16530 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
16531 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
16532 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
16533 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
16534 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
16535 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
16536 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16537 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
16538 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16539 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16540 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16541 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16542 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16544 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
16545 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
16546 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16548 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
16550 cup=\Ea%i%p1%dR%p2%dC$<30>,
16551 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16552 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16554 # This definition for Wyse 350 supports several attributes. This means
16555 # that it has magic cookies (extra spaces where the attributes begin).
16556 # Some applications do not function well with magic cookies. The System
16557 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16558 # If supporting various attributes is not vital, 'xmc#1' and the extra
16559 # attributes can be removed.
16560 # Mapping to ASCII character set ('acsc' capability) can also be
16561 # restored if needed.
16562 # In addition, color capabilities have been added to this file. The drawback,
16563 # however, is that the background color has to be black. The foreground colors
16564 # are numbered 0 through 15.
16566 # NOTE: The NCR Unix System Administrator's Shell does not function properly
16567 # with the 'pairs' capability defined as below. If you wish to
16568 # have it included, Un-comment it and recompile (using 'tic').
16570 ncr260wy350pp|NCR 2900_260 wyse 350,
16571 am, bw, hs, km, mc5i, mir, msgr, xon,
16572 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
16573 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16574 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16575 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16576 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
16577 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16578 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
16579 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16580 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16581 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16582 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16583 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16584 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16585 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16586 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16587 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16588 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16589 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16590 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16591 mc0=\EP$<10>, mc4=^T, mc5=^R,
16592 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
16593 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16594 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16595 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16597 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
16598 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
16599 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16601 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
16603 cup=\Ea%i%p1%dR%p2%dC$<30>,
16604 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16605 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16607 # This definition for Wyse 50+ supports several attributes. This means
16608 # that it has magic cookies (extra spaces where the attributes begin).
16609 # Some applications do not function well with magic cookies. The System
16610 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16611 # If supporting various attributes is not vital, 'xmc#1' and the extra
16612 # attributes can be removed.
16613 # Mapping to ASCII character set ('acsc' capability) can also be
16614 # restored if needed.
16615 # (ncr260wy50+pp: originally contained commented-out
16616 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
16617 ncr260wy50+pp|NCR 2900_260 wyse 50+,
16618 am, bw, hs, km, mc5i, mir, msgr, xon,
16619 cols#80, lines#24, nlab#32, xmc#1,
16620 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
16621 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16622 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16623 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
16624 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16625 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
16626 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
16628 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16629 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16630 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16631 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16632 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16633 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16634 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16635 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16636 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16637 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16638 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16639 mc0=\EP$<10>, mc4=^T, mc5=^R,
16640 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16641 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16642 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16643 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16644 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
16645 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
16646 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
16648 cup=\Ea%i%p1%dR%p2%dC$<30>,
16649 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16650 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16652 ncr260wy60pp|NCR 2900_260 wyse 60,
16653 am, bw, hs, km, mc5i, mir, msgr, xon,
16654 cols#80, lines#24, nlab#32,
16655 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16656 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
16657 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16658 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16659 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16660 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
16661 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
16663 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16664 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16665 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
16666 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16667 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16668 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
16669 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
16670 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
16671 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
16672 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
16673 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16674 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16675 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
16676 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16677 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16678 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16679 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
16680 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
16682 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
16684 cup=\Ea%i%p1%dR%p2%dC$<30>,
16685 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16686 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16688 ncr160vppp|NCR 2900_160 viewpoint,
16690 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
16692 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
16694 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
16696 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
16697 use=ncr260vt100wan,
16698 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
16699 use=ncr260vt100wpp,
16700 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
16702 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
16704 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
16705 use=ncr260vt200wan,
16706 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
16707 use=ncr260vt200wpp,
16708 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
16710 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
16712 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
16713 use=ncr260vt300wan,
16714 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
16715 use=ncr260vt300wpp,
16716 ncr160wy50+pp|NCR 2900_160 wyse 50+,
16718 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
16719 use=ncr260wy50+wpp,
16720 ncr160wy60pp|NCR 2900_160 wyse 60,
16722 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
16724 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
16725 am, hs, mc5i, mir, msgr, xon,
16726 cols#80, it#8, lines#24, nlab#32,
16727 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
16728 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
16729 clear=\E[2J\E[1;1H$<300>, cr=^M,
16730 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
16731 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
16732 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
16733 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
16734 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
16735 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
16736 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
16737 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
16738 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
16740 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
16741 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
16742 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
16743 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
16744 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
16745 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
16746 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
16748 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
16749 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
16750 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
16752 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
16754 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
16755 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
16758 # Vendor-supplied NCR termcaps end here
16760 # NCR7900 DIP switches:
16764 # 5 - Parity (Odd/Even)
16765 # 6 - Don't Send or Do Send Spaces
16766 # 7 - Parity Enable
16767 # 8 - Stop Bits (One/Two)
16770 # 1 - Upper/Lower Shift
16771 # 2 - Typewriter Shift
16772 # 3 - Half Duplex / Full Duplex
16773 # 4 - Light/Dark Background
16774 # 5-6 - Carriage Return Without / With Line Feed
16775 # 7 - Extended Mode
16776 # 8 - Suppress Keyboard Display
16779 # 1 - End of line entry disabled/enabled
16780 # 2 - Conversational mode / (Local?) Mode
16781 # 3 - Control characters displayed / not displayed
16782 # 4 - (2-wire?) / 4-wire communications
16783 # 5 - RTS on and off for each character
16784 # 6 - (50Hz?) / 60 Hz
16785 # 7 - Exit after level zero diagnostics
16786 # 8 - RS-232 interface
16789 # 1 - Reverse Channel (yes / no)
16790 # 2 - Manual answer (no / yes)
16791 # 3-4 - Cursor appearance
16792 # 5 - Communication Rate
16793 # 6 - Enable / Disable EXT turnoff
16794 # 7 - Enable / Disable CR turnoff
16795 # 8 - Enable / Disable backspace
16797 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
16798 # reverse, blink, dim, and underline) the appropriate number of bits (by
16799 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
16800 # '@' is (effectively) "or"ed with each attribute to generate the proper third
16801 # character in the <ESC>0 sequence. The <sgr> string implements the following
16804 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
16805 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
16807 # Where: P1 <==> Standout attribute parameter
16808 # P2 <==> Underline attribute parameter
16809 # P3 <==> Reverse attribute parameter
16810 # P4 <==> Blink attribute parameter
16811 # P5 <==> Dim attribute parameter
16812 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
16813 ncr7900i|ncr7900|ncr 7900 model 1,
16815 cols#80, lines#24, xmc#1,
16816 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16817 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
16818 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
16819 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
16821 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
16822 sgr0=\E0@, smso=\E0Q, smul=\E0`,
16823 ncr7900iv|ncr 7900 model 4,
16826 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
16827 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
16828 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
16829 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
16830 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16831 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16832 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16833 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16834 # The user can enter a CTRL-B to get out of this locked state.
16835 # In <hpa>, we want to output the character given by the formula:
16836 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16837 ncr7901|ncr 7901 model,
16840 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16841 cub1=^H, cud1=^J, cuf1=^F,
16842 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16844 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16845 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16846 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16847 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16848 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16849 vpa=\013%p1%{64}%+%c,
16851 # Newbury Data Recording Limited (Newbury Data)
16853 # Have been manufacturing and reselling various peripherals for a long time
16854 # They don't make terminals anymore, but are still in business (in 2007).
16855 # Their e-mail address is at ndsales@newburydata.co.uk
16856 # and their post address is:
16858 # Newbury Data Recording Ltd,
16859 # Premier Park, Road One,
16860 # Winsford, Cheshire, CW7 3PT
16862 # Their technical support is still good, they sent me for free a printed copy
16863 # of the 9500 user manual and I got it just 1 week after I first contacted them
16867 # Manufactured in the early/mid eighties, behaves almost the same as a
16868 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16869 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16870 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16871 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16872 # recognized: if you type in "ESC !", the next (third) character is not
16873 # echoed, showing that the terminal was actually waiting for a parameter!
16874 ndr9500|nd9500|Newbury Data 9500,
16875 am, bw, hs, mc5i, mir, msgr, ul, xon,
16876 cols#80, lines#24, wsl#79,
16877 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16878 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16879 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16880 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16881 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16882 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16883 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16884 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16885 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16886 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16887 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16888 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16889 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16890 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16891 pfloc=\E|%{48}%p1%+%c2%p2\031,
16892 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16893 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16894 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16895 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16896 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16898 ndr9500-nl|NDR 9500 with no status line,
16901 dsl@, fsl@, tsl@, use=ndr9500,
16903 ndr9500-25|NDR 9500 with 25th line enabled,
16904 lines#25, use=ndr9500,
16906 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16907 lines#25, use=ndr9500-nl,
16909 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16912 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16913 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16914 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16916 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16917 lines#25, use=ndr9500-mc,
16919 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16922 dsl@, fsl@, tsl@, use=ndr9500-mc,
16924 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16925 lines#25, use=ndr9500-mc-nl,
16927 #### Perkin-Elmer (Owl)
16929 # These are official terminfo entries from within Perkin-Elmer.
16932 bantam|pe550|pe6100|perkin elmer 550,
16935 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16936 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16937 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16938 fox|pe1100|perkin elmer 1100,
16941 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16942 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16943 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16944 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16945 owl|pe1200|perkin elmer 1200,
16948 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16949 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16950 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16951 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16952 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16953 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16954 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16955 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16956 pe1251|pe6300|pe6312|perkin elmer 1251,
16958 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16959 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16960 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16961 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16962 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16963 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16964 # (pe7000m: this had
16965 # rmul=\E!\0, smul=\E!\040,
16966 # which is probably wrong, it collides with kf0
16967 pe7000m|perkin elmer 7000 series monochrome monitor,
16970 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16971 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16972 ed=\EJ, el=\EI, home=\EH, ind=^J,
16973 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16974 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16975 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16976 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16978 pe7000c|perkin elmer 7000 series colour monitor,
16979 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16980 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16984 # Sperry Univac has merged with Burroughs to form Unisys.
16987 # This entry is for the Sperry UTS30 terminal running the TTY
16988 # utility under control of CP/M Plus 1R1. The functionality
16989 # provided is comparable to the DEC vt100.
16990 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16991 uts30|sperry uts30 with cp/m@1R1,
16993 cols#80, lines#24, wsl#40,
16994 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16995 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
16996 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
16997 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16998 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16999 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
17000 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
17001 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
17002 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
17003 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
17004 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
17005 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
17006 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17007 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
17008 smul=\E[4m, tsl=\E], uc=\EPB,
17012 # Tandem builds these things for use with its line of fault-tolerant
17013 # transaction-processing computers. They aren't generally available
17014 # on the merchant market, and so are fairly uncommon.
17017 tandem6510|adm3a repackaged by Tandem,
17020 # A funny series of terminal that TANDEM uses. The actual model numbers
17021 # have a fourth digit after 653 that designates minor variants. These are
17022 # natively block-mode and rather ugly, but they have a character mode which
17023 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
17024 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
17025 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
17026 tandem653|t653x|Tandem 653x multipage terminal,
17027 OTbs, am, da, db, hs,
17028 cols#80, lines#24, wsl#64, xmc#1,
17029 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
17030 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
17031 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
17032 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
17034 #### Tandy/Radio Shack
17036 # Tandy has a line of VDTs distinct from its microcomputers.
17039 dmterm|deskmate terminal,
17042 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
17043 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17044 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
17045 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
17046 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
17047 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
17048 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
17049 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
17051 dt100|dt-100|Tandy DT-100 terminal,
17053 cols#80, lines#24, xmc#1,
17054 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17055 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17056 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17057 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
17058 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
17059 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
17060 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
17061 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
17062 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
17063 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
17064 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
17065 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17066 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
17067 cols#132, use=dt100,
17068 dt110|Tandy DT-110 emulating ansi,
17071 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17072 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17073 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17074 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
17075 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
17076 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
17077 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
17078 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
17079 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
17080 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
17081 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
17082 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17083 smacs=^N, smso=\E[7m, smul=\E[4m,
17084 pt210|TRS-80 PT-210 printing terminal,
17087 bel=^G, cr=^M, cud1=^J, ind=^J,
17089 #### Tektronix (tek)
17091 # Tektronix tubes are graphics terminals. Most of them use modified
17092 # oscilloscope technology incorporating a long-persistence green phosphor,
17093 # and support vector graphics on a main screen with an attached "dialogue
17094 # area" for interactive text.
17097 tek|tek4012|tektronix 4012,
17100 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
17101 ff=\014$<1000>, is2=\E^O,
17102 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17103 tek4013|tektronix 4013,
17104 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
17105 tek4014|tektronix 4014,
17107 is2=\E\017\E9, use=tek4012,
17108 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17109 tek4015|tektronix 4015,
17110 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
17111 tek4014-sm|tektronix 4014 in small font,
17112 cols#121, lines#58,
17113 is2=\E\017\E\:, use=tek4014,
17114 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17115 tek4015-sm|tektronix 4015 in small font,
17116 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
17117 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
17119 # You need to have "stty nl2" in effect. Some versions of tset(1) know
17120 # how to set it for you.
17122 # It's got the Magic Cookie problem around stand-out mode. If you can't
17123 # live with Magic Cookie, remove the :so: and :se: fields and do without
17124 # reverse video. If you like reverse video stand-out mode but don't want
17125 # it to flash, change the letter 'H' to 'P' in the :so: field.
17126 tek4023|tektronix 4023,
17128 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
17129 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
17130 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
17131 rmso=^_@, smso=^_P,
17132 # It is recommended that you run the 4025 at 4800 baud or less;
17133 # various bugs in the terminal appear at 9600. It wedges at the
17134 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
17135 # on keyboard don't work. You have to hit BREAK twice to get
17136 # one break at any speed - this is a documented feature.
17137 # Can't use cursor motion because it's memory relative, and
17138 # because it only works in the workspace, not the monitor.
17139 # Same for home. Likewise, standout only works in the workspace.
17141 # <el> was commented out since vi and rogue seem to work better
17142 # simulating it with lots of spaces!
17144 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
17145 # and didn't seem necessary.
17147 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
17149 cols#80, it#8, lines#34, lm#0,
17150 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
17151 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
17152 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
17153 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
17154 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
17155 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
17156 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
17158 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17159 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
17160 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
17161 tek4025-17|tek 4025 17 line window,
17162 lines#17, use=tek4025,
17163 tek4025-17-ws|tek 4025 17 line window in workspace,
17164 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
17165 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
17166 smso=\037att e\r, use=tek4025-17,
17167 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
17168 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
17169 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17171 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
17172 # The following status modes are assumed for normal operation (replace the
17173 # initial "!" by whatever the current command character is):
17174 # !COM 29 # NOTE: changes command character to GS (^])
17180 # ^]STO 9 17 25 33 41 49 57 65 73
17181 # Other modes may be set according to communication requirements.
17182 # If the command character is inadvertently changed, termcap can't restore it.
17183 # Insert-character cannot be made to work on both top and bottom rows.
17184 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
17185 # There also seems to be a problem with vertical motion, perhaps involving
17186 # delete/insert-line, following a typed carriage return. This terminal sucks.
17187 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17188 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
17189 # work any more. -- esr)
17190 tek4025a|Tektronix 4025A,
17191 OTbs, OTpt, am, bw, da, db, xon,
17192 cols#80, it#8, lines#34,
17193 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
17194 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
17195 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
17196 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
17197 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
17198 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
17199 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
17200 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
17202 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
17203 # Here's the command file that I use to get rogue to work on the 4025.
17204 # It should work with any program using the old curses (e.g. it better
17205 # not try to scroll, or cursor addressing won't work. Also, you can't
17207 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
17208 tek4025-cr|tek 4025 for curses and rogue,
17210 cols#80, it#8, lines#33,
17211 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
17212 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
17213 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17214 rmcup=\037wor 0, smcup=\037wor 33h,
17215 # next two lines commented out since curses only allows 128 chars, sigh.
17216 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
17217 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
17218 tek4025ex|4025ex|4027ex|tek 4025 w/!,
17219 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
17220 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17221 tek4105|tektronix 4105,
17222 OTbs, am, mir, msgr, ul, xenl, xt,
17223 cols#79, it#8, lines#29,
17224 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
17225 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
17226 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
17227 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
17228 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
17229 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
17230 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
17231 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
17232 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
17233 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17234 smul=\E[=5;<2m, tbc=\E[1g,
17236 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
17237 tek4105-30|4015 emulating 30 line vt100,
17238 am, mir, msgr, xenl, xon,
17239 cols#80, it#8, lines#30, vt#3,
17240 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17241 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17242 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17243 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17244 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17245 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17246 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
17247 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
17248 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17249 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17250 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17251 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17252 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
17253 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17254 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17257 # Tektronix 4105 from BRL
17258 # The following setup modes are assumed for normal operation:
17259 # CODE ansi CRLF no DABUFFER 141
17260 # DAENABLE yes DALINES 30 DAMODE replace
17261 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
17262 # FLAGGING input INSERTREPLACE replace LFCR no
17263 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
17264 # SELECTCHARSET G1 0 TABS -2
17265 # Other setup modes may be set for operator convenience or communication
17266 # requirements; I recommend
17267 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17268 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17269 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17270 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
17271 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17272 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
17274 # and factory color maps. After setting these modes, save them with NVSAVE. No
17275 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17276 # "IC" cannot be used in combination with "im" & "ei".
17277 # "tek4105a" is just a guess:
17278 tek4105a|Tektronix 4105,
17279 OTbs, OTpt, msgr, xon,
17280 OTkn#8, cols#80, it#8, lines#30, vt#3,
17281 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17282 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17283 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17284 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17285 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17286 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17287 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17288 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17289 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17290 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17291 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17292 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17293 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17294 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17295 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17296 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17297 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17298 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17301 # Tektronix 4106/4107/4109 from BRL
17302 # The following setup modes are assumed for normal operation:
17303 # CODE ansi COLUMNMODE 80 CRLF no
17304 # DABUFFER 141 DAENABLE yes DALINES 32
17305 # DAMODE replace DAVISIBILITY yes ECHO no
17306 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
17307 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
17308 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
17310 # Other setup modes may be set for operator convenience or communication
17311 # requirements; I recommend
17312 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17313 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17314 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17315 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
17316 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17317 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
17319 # and factory color maps. After setting these modes, save them with NVSAVE. No
17320 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17321 # "IC" cannot be used in combination with "im" & "ei".
17322 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
17324 cols#80, it#8, lines#32, vt#3,
17325 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17326 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17327 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17328 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17329 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17330 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17331 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17332 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17333 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17334 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17335 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17336 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17337 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17338 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17339 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17340 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17341 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17342 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
17344 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
17345 # 0 selects Tek mode, i.e., \E%!0
17346 # 1 selects ANSI mode
17347 # 2 selects ANSI edit-mode
17348 # 3 selects VT52 mode
17350 # One odd thing about the description (which has been unchanged since the 90s)
17351 # is that the cursor addressing is using VT52 mode, and a few others use the
17352 # VT52's non-CSI versions of ANSI, e.g., \EJ.
17353 tek4107|tek4109|tektronix terminals 4107 4109,
17354 OTbs, am, mir, msgr, ul, xenl, xt,
17355 cols#79, it#8, lines#29,
17356 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
17357 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
17358 cub1=^H, cud1=^J, cuf1=\EC,
17359 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
17360 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
17361 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17362 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
17363 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
17364 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
17365 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
17366 smul=\E%!1\E[4m$<2>\E%!0,
17367 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
17368 # see the note attached to tek4207.
17369 tek4207-s|Tektronix 4207 with sysline but no memory,
17371 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
17372 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17373 is2=\E7\E[?6l\E[2K\E[?6h\E8,
17374 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
17376 # The 4110 series may be a wonderful graphics series, but they make the 4025
17377 # look good for screen editing. In the dialog area, you can't move the cursor
17378 # off the bottom line. Out of the dialog area, ^K moves it up, but there
17379 # is no way to scroll.
17381 # Note that there is a floppy for free from Tek that makes the
17382 # 4112 emulate the vt52 (use the vt52 termcap). There is also
17383 # an expected enhancement that will use ANSI standard sequences.
17385 # 4112 in non-dialog area pretending to scroll. It really wraps
17386 # but vi is said to work (more or less) in this mode.
17388 # 'vi' works reasonably well with this entry.
17390 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
17393 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
17394 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
17395 # The 4112 with the ANSI compatibility enhancement
17396 tek4112|tek4114|tektronix 4110 series,
17399 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
17400 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
17401 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
17402 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
17403 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17404 tek4112-nd|4112 not in dialog area,
17406 cuu1=^K, use=tek4112,
17407 tek4112-5|4112 in 5 line dialog area,
17408 lines#5, use=tek4112,
17409 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
17410 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
17411 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
17412 # previously \0410 and \0411 sequences...I don't *think* they were supposed
17413 # to be 4-digit octal -- esr)
17414 tek4113|tektronix 4113 color graphics with 5 line dialog area,
17417 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
17418 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17419 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
17420 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
17422 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
17423 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
17424 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
17425 # :vb: needs enough delay to let you see the background color being toggled.
17426 tek4113-nd|tektronix 4113 color graphics with no dialog area,
17428 cols#80, it#8, lines#34,
17429 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
17431 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17432 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
17433 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
17434 # This entry is from Tek. Inc. (Brian Biehl)
17435 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
17436 otek4115|Tektronix 4115,
17437 OTbs, am, da, db, eo,
17438 cols#80, it#8, lines#34,
17439 cbt=\E[Z, clear=\E[H\E[2J,
17440 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
17441 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17442 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
17443 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
17445 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
17446 kbs=^H, ri=\EM, rmam=\E[?7l,
17447 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
17448 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
17449 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
17451 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
17454 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
17455 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17456 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17457 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17458 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
17459 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
17460 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
17461 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
17462 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
17463 rmso=\E[m, rmul=\E[m,
17464 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
17465 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17466 vpa=\E[%p1%{1}%+%dd,
17467 # The tek4125 emulates a vt100 incorrectly - the scrolling region
17468 # command is ignored. The following entry replaces <csr> with the needed
17469 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
17470 # chokes on; and adds a lot of initialization for the tek dialog area.
17471 # Note that this entry uses all 34 lines and sets the cursor color to green.
17472 # Steve Jacobson 8/85
17473 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
17474 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
17475 tek4125|tektronix 4125,
17477 csr@, dl1=\E[1M, il1=\E[1L,
17478 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17479 rc@, sc@, smkx=\E=, use=vt100,
17481 # From: <jcoker@ucbic>
17482 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
17483 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
17484 # note that if jcoker wasn't confused you may be able to use this one.
17485 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
17486 tek4207|Tektronix 4207 graphics terminal with memory,
17487 am, bw, mir, msgr, ul, xenl,
17488 cols#80, it#8, lines#32,
17489 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
17490 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17491 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
17492 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
17493 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
17494 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17495 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
17496 rev=\E[7m, ri=\E[T,
17497 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
17498 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
17499 smul=\E[4m, tbc=\E[1g,
17501 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
17502 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
17503 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
17504 tek4404|tektronix 4404,
17506 cols#80, it#8, lines#32,
17507 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
17508 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
17509 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
17510 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
17511 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
17512 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
17513 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17514 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
17515 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
17516 # Some unknown person wrote:
17517 # I added the is string - straight Unix has ESC ; in the login
17518 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
17519 # mode). The is string here cleans up a few things (but not
17521 ct8500|tektronix ct8500,
17524 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
17525 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
17526 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
17527 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
17528 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
17530 # Tektronix 4205 terminal.
17532 # am is not defined because the wrap around occurs not when the char.
17533 # is placed in the 80'th column, but when we are attempting to type
17534 # the 81'st character on the line. (esr: hmm, this is like the vt100
17535 # version of xenl, perhaps am + xenl would work!)
17537 # Bold, dim, and standout are simulated by colors and thus not allowed
17538 # with colors. The tektronix color table is mapped into the RGB color
17539 # table by setf/setb. All colors are reset to factory specifications by oc.
17540 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
17541 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
17542 # interval then maps into pre-defined value.
17543 tek4205|tektronix 4205,
17545 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
17546 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17547 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
17548 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
17549 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17550 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17551 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
17552 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
17553 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
17555 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
17556 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
17557 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
17558 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
17560 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
17561 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
17562 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
17563 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17564 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17565 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
17566 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17567 smul=\E[4m, tbc=\E[1g,
17569 #### Teletype (tty)
17571 # These are the hardcopy Teletypes from before AT&T bought the company,
17572 # clattering electromechanical dinosaurs in Bakelite cases that printed on
17573 # pulpy yellow roll paper. If you remember these you go back a ways.
17574 # Teletype-branded VDTs are listed in the AT&T section.
17576 # The earliest UNIXes were designed to use these clunkers; nroff and a few
17577 # other programs still default to emitting codes for the Model 37.
17580 tty33|tty35|model 33 or 35 teletype,
17583 bel=^G, cr=^M, cud1=^J, ind=^J,
17584 tty37|model 37 teletype,
17586 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
17589 # There are known to be at least three flavors of the tty40, all seem more
17590 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
17591 # awful braindamage, such as printing a visible newline indicator after each
17592 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
17593 # braindamaged but has hope and is described here. The 40-4 is a 3270
17594 # lookalike and beyond hope. The terminal has visible bell but I don't know
17595 # it - it's null here to prevent it from showing the BL character.
17596 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
17597 # a "newline" style terminal (-crmode) vi figures all it needs is nl
17598 # to get crlf, even if <cr> is not ^M.)
17599 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
17600 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
17603 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
17604 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
17605 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
17606 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
17607 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
17608 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
17609 tty43|model 43 teletype,
17610 OTbs, am, hc, os, xon,
17612 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
17617 # You can add <is2=\E<> to put this 40-column mode, though I can't
17618 # for the life of me think why anyone would want to.
17619 scanset|sc410|sc415|Tymshare Scan Set,
17622 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
17623 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17624 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
17625 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
17626 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
17628 #### Volker-Craig (vc)
17630 # If you saw a Byte Magazine cover with a terminal on it during the early
17631 # 1980s, it was probably one of these. Carl Helmers liked them because
17632 # they could crank 19.2 and were cheap (that is, he liked them until he tried
17633 # to program one...)
17636 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
17637 # every other linefeed.
17638 vc303|vc103|vc203|volker-craig 303,
17641 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17642 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
17643 kcuu1=^N, ll=\017$<1>W,
17644 vc303a|vc403a|volker-craig 303a,
17645 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
17646 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
17647 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
17648 vc404|volker-craig 404,
17651 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
17652 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
17653 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
17654 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
17655 vc404-s|volker-craig 404 w/standout mode,
17656 cud1=^J, rmso=^O, smso=^N, use=vc404,
17657 # From: <wolfgang@cs.sfu.ca>
17658 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
17659 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
17662 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
17663 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
17664 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
17665 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
17666 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
17667 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
17668 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
17669 rmso=\E^_, smso=\E^Y,
17670 vc415|volker-craig 415,
17671 clear=^L, use=vc404,
17673 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
17676 #### IBM PC and clones
17679 # The pcplot IBM-PC terminal emulation program is really messed up. It is
17680 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
17681 # doesn't support scrolling regions, ignores add line commands, and ignores
17682 # delete line commands. Consequently, the resulting behavior looks like a
17683 # crude adm3a-type terminal.
17684 # Steve Jacobson 8/85
17685 pcplot|pc-plot terminal emulation program,
17687 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
17688 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
17689 # I've found that my KayPro II, running MDM730, continues to emulate an
17690 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
17691 # system the following termcap entry works well:
17692 # I have noticed a couple of minor glitches, but nothing I can't work
17693 # around. (I added two capabilities from the BRL entry -- esr)
17694 kaypro|kaypro2|kaypro II,
17697 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
17698 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
17699 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
17701 # From IBM, Thu May 5 19:35:27 1983
17702 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
17703 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
17706 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
17707 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
17709 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
17710 OTbs, am, bw, eo, hs, km, msgr, ul,
17711 cols#80, it#8, lines#24,
17712 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
17713 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
17714 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17715 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17716 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
17717 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
17718 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
17719 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17720 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
17721 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
17722 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
17723 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
17724 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
17725 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
17726 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17730 # Apple II firmware console first, then various 80-column cards and
17731 # terminal emulators. For two cents I'd toss all these in the UFO file
17732 # along with the 40-column apple entries.
17735 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
17736 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
17737 # function of TIC, not the firmware.
17738 # The clear key on a IIgs will do something like clear-screen,
17739 # depending on what you're in.
17740 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
17741 OTbs, am, bw, eo, msgr,
17742 cols#80, it#8, lines#24,
17743 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
17744 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17745 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
17746 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
17748 # Apple //e with 80-column card, entry from BRL
17749 # The modem interface is permitted to discard LF (maybe DC1), otherwise
17750 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
17751 # Auto-wrap does not work right due to newline scrolling delay, which also
17752 # requires that you set "stty cr2".
17753 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
17754 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
17755 # using a terminal emulation program instead of the built-in firmware.
17759 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
17760 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
17761 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
17762 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
17764 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
17765 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
17766 apple2e-p|Apple //e via Pascal,
17767 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
17768 kcud1=^J, use=apple2e,
17769 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
17770 # Enable DC3/DC1 flow control with "stty ixon -ixany".
17771 apple-ae|ASCII Express,
17772 OTbs, am, bw, msgr, nxon, xon,
17773 cols#80, it#8, lines#24,
17774 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
17775 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17776 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
17777 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
17779 appleII|apple ii plus,
17781 cols#80, it#8, lines#24,
17782 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
17783 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
17784 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
17785 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
17787 # Originally by Gary Ford 21NOV83
17788 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
17789 apple-80|apple II with smarterm 80 col,
17792 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
17793 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
17794 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
17795 apple-soroc|apple emulating soroc 120,
17798 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17799 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
17800 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17801 # From Peter Harrison, Computer Graphics Lab, San Francisco
17802 # ucbvax!ucsfmis!harrison .....uucp
17803 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
17804 # "These two work. If you don't have the inverse video chip for the
17805 # Apple with videx then remove the :so: and :se: fields."
17806 # (apple-videx: this used to be called DaleApple -- esr)
17807 apple-videx|Apple with videx videoterm 80 column board with inverse video,
17809 cols#80, it#8, lines#24,
17810 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
17811 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17812 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
17813 rmso=^Z2, sgr0=^Z2, smso=^Z3,
17814 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
17815 # Apple Cat ][ 212 modem, + more all
17816 # controlled by ASCII Express: Pro.
17817 # From Dave Shaver <isucs1!shaver>
17818 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
17821 acsc=, clear=^L, cuf1=^\,
17822 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17823 flash=^W35^W06, home=^Y,
17824 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
17826 apple-uterm|Ultraterm for Apple micros,
17829 acsc=, clear=^L, cuf1=^\,
17830 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17831 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17832 # from trwrba!bwong (Bradley W. Wong):
17834 # This entry assumes that you are using an apple with the UCSD Pascal
17835 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17836 # supplied with the standard apple except that screenwidth should be set
17837 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17838 # this termcap entry. This is because that key, on the Apple, transmits
17839 # a ^U and would thus preempt the more useful "up" function of vi.
17842 apple80p|80-column apple with Pascal card,
17845 clear=^Y^L, cuf1=^\\:,
17846 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17849 # Apple II+ equipped with Videx 80 column card
17851 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17852 # manually converted by D A Gwyn
17854 # DO NOT use any terminal emulation with this data base, it works directly
17855 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17857 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17858 # 1 screen, while in R2 ^U doesn't.
17859 # For inverse alternate character set add:
17860 # <smacs>=^O:<rmacs>=^N:
17861 # (apple-v: added it#8 -- esr)
17862 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17864 cols#80, it#8, lines#24,
17865 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17866 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17867 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17868 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17869 khome=^Y, rmso=^Z2, smso=^Z3,
17870 apple-videx3|vapple|Apple II with 80 col card,
17873 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17874 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17875 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17876 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17877 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17878 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17879 aepro|Apple II+ running ASCII Express Pro--vt52,
17882 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17883 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17885 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17886 apple-vm80|ap-vm80|apple with viewmax-80,
17889 clear=\014$<300/>, cuf1=^\\:,
17890 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17891 ed=\013$<300/>, el=^], home=\031$<200/>,
17893 #### Apple Lisa & Macintosh
17896 # (lisa: changed <cvvis> to <cnorm> -- esr)
17897 lisa|apple lisa console display (black on white),
17898 OTbs, am, eo, msgr,
17899 cols#88, it#8, lines#32,
17900 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17901 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17902 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17903 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17904 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17905 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17906 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17907 liswb|apple lisa console display (white on black),
17908 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17909 smso=\E[m, smul=\E[4m, use=lisa,
17911 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17912 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17914 # These entries assume that the 'Auto Wraparound' is enabled.
17915 # Xon-Xoff flow control should also be enabled.
17917 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17918 # settings are in non-volatile memory and don't need to be reset upon login.
17919 # Also setting the number of columns glitches the screen annoyingly.
17920 # You can type "reset" to get them set.
17922 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17923 OTbs, OTpt, am, xenl, xon,
17924 OTkn#4, cols#80, it#8, lines#24, vt#3,
17925 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17926 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17927 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17928 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17929 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17930 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17931 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17932 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17933 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17934 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17936 # Lisaterm in 132 column ("wide") mode.
17937 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17939 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17940 # Although MacTerminal has insert/delete line, it is commented out here
17941 # since it is much faster and cleaner to use the "lock scrolling region"
17942 # method of inserting and deleting lines due to the MacTerminal implementation.
17943 # Also, the "Insert/delete ch" strings have an extra character appended to them
17944 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17945 # supported by MacTerminal.
17946 mac|macintosh|Macintosh with MacTerminal,
17949 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17950 # Lisaterm in 132 column ("wide") mode.
17951 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17954 #### Radio Shack/Tandy
17957 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17958 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17959 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17960 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17962 cols#80, it#8, lines#24,
17963 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17964 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17965 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17966 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17967 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17968 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17969 # (trs2: removed obsolete ":nl=^_:" -- esr)
17970 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17972 cols#80, it#8, lines#24,
17973 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17974 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17975 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17976 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17977 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17978 # (This had extension capabilities
17979 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17980 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17981 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17982 trs16|trs-80 model 16 console,
17984 cols#80, it#8, lines#24,
17985 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17986 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17987 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17988 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17989 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17990 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17991 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17992 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17993 smacs=\ERG, smso=\ERD,
17995 #### Commodore Business Machines
17997 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17998 # after years of shaky engineering and egregious mismanagement. Made one
17999 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
18000 # C-128, VIC-20). The C-64 is said to have been the most popular machine
18001 # ever (most units sold); they can still be found gathering dust in closets
18005 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
18006 # Added a few more entries, converted caret-type control sequence (^x) entries
18007 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
18008 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
18010 # :as:, :ae: Support for alternate character sets.
18011 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
18012 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
18013 # This one appears to fix a problem I always had with a line ending
18014 # at 'width+1' (I think) followed by a blank line in vi. The blank
18015 # line tended to disappear and reappear depending on how the screen
18016 # was refreshed. Note that this is probably needed only if you use
18017 # something like a Dnet Fterm with the window sized to some peculiar
18018 # dimension larger than 80 columns.
18019 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
18020 # (amiga: removed obsolete :kn#10:,
18021 # also added empty <acsc> to suppress a warning --esr)
18023 OTbs, am, bw, xenl,
18025 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
18026 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
18027 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
18028 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
18029 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18030 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
18031 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
18032 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
18033 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
18034 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
18035 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
18036 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
18037 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18039 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
18040 # (amiga: added empty <acsc> to suppress a warning.
18041 # I'm told this entry screws up badly with AS225, the Amiga
18042 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
18043 amiga-h|Hans Verkuil's Amiga ANSI,
18046 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
18047 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
18048 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
18049 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
18050 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
18051 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
18052 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
18053 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
18054 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18055 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
18056 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
18057 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
18058 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
18059 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
18060 smso=\2337m, smul=\2334m,
18062 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
18064 # Pavel Fedin added
18069 amiga-8bit|Amiga ANSI using 8-bit controls,
18070 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18071 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
18072 kpp=\233T, ri=\215, rin@, use=amiga-h,
18074 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
18075 # requires use of appropriate preferences settings.
18076 amiga-vnc|Amiga using VNC console (black on light gray),
18077 am, da, db, msgr, ndscr,
18078 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
18079 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
18080 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
18081 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18082 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18083 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18084 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18085 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
18086 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
18087 indn=\E[%p1%dS, invis=\E8m,
18088 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18089 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18090 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
18091 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
18092 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
18093 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
18094 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
18095 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
18096 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18097 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
18098 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
18099 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
18100 smso=\E[1m, smul=\E[4m,
18102 # MorphOS on Genesi Pegasos
18103 # By Pavel Fedin <sonic_amiga@rambler.ru>
18105 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18106 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
18107 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
18108 ri=\215, rin@, use=amiga-h,
18110 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
18111 # I'm trying to write a termcap for a commodore b-128, and I'm
18112 # having a little trouble. I've had to map most of my control characters
18113 # to something that unix will accept (my delete-char is a ctrl-t, etc),
18114 # and create some functions (like cm), but thats life.
18115 # The problem is with the arrow keys - right, and up work fine, but
18116 # left deletes the previous character and down I just can't figure out.
18117 # Jove knows what I want, but I don't know what it's sending to me (it
18118 # isn't thats bound to next-line in jove).
18119 # Anybody got any ideas? Here's my termcap.
18120 # DAG -- I changed his "^n" entries to "\n"; see if that works.
18122 commodore|b-128|Commodore B-128 micro,
18124 OTdN#20, cols#80, lines#24, pb#150,
18125 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
18126 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
18127 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
18128 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
18129 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
18134 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
18135 northstar|North Star Advantage,
18139 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
18140 el=\016$<200/>, home=\034\032$<200/>,
18144 # Thu Jul 7 03:55:16 1983
18146 # As an aside, be careful; it may sound like an anomaly on the
18147 # Osborne, but with the 80-column upgrade, it's too easy to
18148 # enter lines >80 columns!
18150 # I've already had several comments...
18151 # The Osborne-1 with the 80-col option is capable of being
18152 # 52, 80, or 104 characters wide; default to 80 for compatibility
18153 # with most systems.
18155 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18156 osborne-w|osborne1-w|osborne I in 104-column mode,
18158 cols#104, lines#24,
18159 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18160 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18161 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18162 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18163 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18164 osborne|osborne1|osborne I in 80-column mode,
18165 OTbs, am, mir, msgr, ul, xhp,
18166 OTdB#4, cols#80, lines#24,
18167 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18168 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18169 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18170 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18171 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18173 # Osborne Executive definition from BRL
18174 # Similar to tvi920
18175 # Added by David Milligan and Tom Smith (SMU)
18176 osexec|Osborne executive,
18178 OTug#1, cols#80, lines#24, xmc#1,
18179 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18180 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18181 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18182 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18183 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18184 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18185 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18188 #### Console types for obsolete UNIX clones
18190 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18191 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18192 # were commercial, Minix an educational tool sold in conjunction with a book.
18193 # Memory-segmentation limits and a strong tendency to look like V7 long after
18194 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18195 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18196 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18197 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18198 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18199 # even as single processes under SunOS and the Macintosh OS.
18203 # http://www.minix3.org/manpages/html4/console.html
18204 minix|minix console (v3),
18205 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18206 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18207 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18208 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18209 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18210 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18211 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18212 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18213 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18214 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18215 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18216 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18217 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18218 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18221 minix-3.0|minix console (v3.0),
18222 use=ecma+color, use=minix-1.7,
18225 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18226 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18227 minix-1.7|minix console (v1.7),
18229 cols#80, it#8, lines#25,
18230 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18231 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18232 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18233 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18234 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18235 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18236 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18237 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18238 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18239 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18240 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18241 smso=\E[7m, smul=\E[4m,
18242 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18243 minix-old|minix-1.5|minix console (v1.5),
18245 cols#80, it#8, lines#25,
18246 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18247 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18248 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18249 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18250 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18251 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18252 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18253 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18254 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18255 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18256 # The linewrap option can be specified by editing /usr/include/minix/config.h
18257 # before recompiling the minix 1.5 kernel.
18258 minix-old-am|minix console with linewrap,
18261 pc-minix|minix console on an Intel box,
18262 use=klone+acs, use=minix-3.0,
18264 # According to the Coherent 2.3 manual, the PC console is similar
18265 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18266 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18267 # has blinking and bold.
18268 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18270 cols#80, it#8, lines#25,
18271 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18272 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18273 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18274 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18275 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18277 # According to the Venix 1.1 manual, the PC console is similar
18278 # to a DEC vt52. Differences seem to be (1) arrow keys send
18279 # different strings, (2) enhanced standout, (3) added insert/delete line.
18280 # Note in particular that it doesn't have automatic margins.
18281 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18282 # not described here because this derives from an old termcap entry.
18283 pc-venix|venix|IBM PC console running Venix,
18284 cols#80, it#8, lines#25,
18285 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18286 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18287 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18288 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18290 #### Miscellaneous microcomputer consoles
18292 # If you know anything more about any of these, please tell me.
18295 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18296 # It may be used as a terminal by putting it in "line" mode as seen on
18297 # one of the status lines.
18298 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18299 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18300 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18301 # used \ED instead.
18302 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18303 mai|basic4|MAI Basic Four in ansi mode,
18304 am, da, db, mir, msgr,
18305 cols#82, it#8, lines#25,
18306 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18307 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18308 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18309 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18310 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18311 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18312 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18313 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18314 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18315 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18316 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18317 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18318 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18320 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18321 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18322 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18323 # about 1,5 km from where I live, but doesn't build own computers any
18324 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18325 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18326 # video output for a TV set or a dedicated monitor and several slots for
18327 # Apple II cards. Basis 108 were quite popular at german schools before
18328 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18329 # development system (which I used even in 1993 to program the steering
18330 # and data recording for our school's experimental solar panel :), Apple DOS
18332 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18333 basis|BASIS108 computer with terminal translation table active,
18334 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18335 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18336 smso=\E(, use=adm3a,
18337 # luna's BMC terminal emulator
18338 luna|luna68k|LUNA68K Bitmap console,
18339 cols#88, lines#46, use=ansi-mini,
18340 megatek|pegasus workstation terminal emulator,
18343 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18344 # interface (pre-Macintosh by several years) that went nowhere.
18345 xerox820|x820|Xerox 820,
18348 bel=^G, clear=\032$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18349 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18352 #### Videotex and teletext
18355 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18356 # \E[?3l 80 columns
18357 # \E[?4l scrolling on
18358 # \E[12h local echo off
18359 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18360 # \E)0 G1 DEC set (line graphics)
18362 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18363 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18364 OTbs, eslok, hs, xenl,
18365 cols#80, it#8, lines#24, wsl#72, xmc#0,
18366 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18367 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18368 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18369 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18370 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18371 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18372 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18373 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18374 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18375 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18376 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18377 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18378 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18379 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18380 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18381 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18382 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18383 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18384 u6=\E[%i%d;%dR, u7=\E[6n,
18386 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18388 minitel1|minitel 1,
18389 am, bw, eslok, hs, hz, msgr,
18390 colors#8, cols#40, lines#24, pairs#8,
18391 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18392 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18393 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18394 enacs=^Y, fsl=^J, home=^^, ind=^J,
18395 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18396 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18397 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18398 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18399 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18400 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18401 minitel1b|minitel 1-bistandard (in 40cols mode),
18403 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18404 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18405 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18406 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18407 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18408 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18409 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18410 # <rmkx> posait des problemes (logout en sortant de vi).
18411 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18413 colors@, cols#80, it#8, pairs@,
18414 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18415 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18416 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18417 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18418 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18419 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18420 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18421 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18422 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18424 ######## OBSOLETE VDT TYPES
18426 # These terminals are *long* dead -- these entries are retained for
18427 # historical interest only.
18429 #### Amtek Business Machines
18432 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18433 # but these caps were commented out in 8.3; also, removed overridden
18434 # ":do=^J:" -- esr)
18435 abm80|amtek business machines 80,
18438 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18439 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18440 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18442 #### Bell Labs blit terminals
18444 # These were AT&T's official entries. The 5620 FAQ maintained by
18445 # David Breneman <daveb@dgtl.com> has this to say:
18447 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18448 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18449 # was good. But lo, upon the horizon loomed a mighty management-type person
18450 # (known now only by the initials VP) who said, the mighty Jerq must stay
18451 # alone, and could not go forth into the world. So Locanthi and Pike put the
18452 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18453 # world. And the Jerq lived the rest of its days in research, but never
18454 # strayed from those paths.
18456 # In all seriousness, the Blit was originally known as the Jerq, but when
18457 # it started to be shown outside of the halls of the Bell Labs Research
18458 # organization, the management powers that be decided that the name could
18459 # not remain. So it was renamed to be Blit. This was in late 1981.
18461 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18465 blit|jerq|blit running teletype rom,
18467 cols#87, it#8, lines#72,
18468 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18469 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18470 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18471 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18472 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18473 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18475 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18476 cbblit|fixterm|blit running columbus code,
18478 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18479 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18480 smul=\EU", use=blit,
18482 oblit|ojerq|first version of blit rom,
18483 am, da, db, eo, mir, ul, xon,
18484 cols#88, it#8, lines#72,
18485 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18486 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18487 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18488 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18491 #### Bolt, Beranek & Newman (bbn)
18493 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18494 # The parent company, best known as the architects of the Internet, is
18497 # Jeff DelPapa <dp@world.std.com> writes:
18498 # The bitgraph was a large white box that contained a monochrome bitmap
18499 # display, and a 68000 to run it. You could download code and run it on
18500 # the cpu, it had 128kb (I think) of memory. I used one in the late
18501 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18502 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18503 # rate, and looked like a rubber sheet stretching, then snapping
18504 # upwards. It had everything the early mac had, except a floppy drive a
18505 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18506 # Beranek and Neuman) sold at most a few hundred of them to the real
18507 # world. DOD may have bought more...
18510 # Entries for the BitGraph terminals. The problem
18511 # with scrolling in vi can only be fixed by getting BBN to put
18512 # smarter scroll logic in the terminal or changing vi or padding
18513 # scrolls with about 500 ms delay.
18515 # I always thought the problem was related to the terminal
18516 # counting newlines in its input buffer before scrolling and
18517 # then moving the screen that much. Then vi comes along and
18518 # paints lines in on the bottom line of the screen, so you get
18519 # this big white gap.
18521 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18522 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18524 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18525 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18527 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18530 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18531 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18532 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18533 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18534 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18535 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18536 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18537 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18539 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18540 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18542 bg1.25nv|bbn bitgraph 1.25 (normal video),
18543 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18545 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18546 bg1.25|bbn bitgraph 1.25,
18548 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18549 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18550 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18551 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18552 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18553 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18554 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18557 #### Bull (bq, dku, vip)
18559 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18561 #============================================#
18562 # BULL QUESTAR 210 `SDP' terminals emulation #
18563 #============================================#
18565 # Description written by R.K.Saunders (Bull Transac)
18567 # Modifications written by F. Girard (Bull MTS)
18568 # 19-05-87 V02.00.01
18569 # 17-12-87 V02.00.02
18570 # 15-09-89 V02.00.05
18572 # Typical technical selections F1 (modes SDP/ROLL):
18573 # -------------------------------------------------------
18574 # | 01 02 03 04 05 06 07 08 09 10 |
18575 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18577 # | 11 12 13 14 15 16 17 18 19 20 |
18578 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18580 # | 21 22 23 24 25 26 27 28 29 30 |
18581 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18583 # | 31 32 33 34 35 36 37 38 39 40 |
18584 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18585 # -------------------------------------------------------
18586 # Typical firmware identification F5 "etat 6":
18587 # P287.02.04b (AZERTY)
18588 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18589 # P298.03.03 (monochrome) or P374.03.02 (colour)
18591 # SM SDP mode (VIP command): ^[[?=h
18592 # RIS (erases screen): ^[c
18593 # DMI disable keyboard: ^[`
18594 # SM double rendition mode: ^[[?>h
18595 # RM solicited status mode: ^[[5l
18596 # RM character mode: ^[[>l
18597 # RM echoplex mode: ^[[12l
18598 # RM column tab mode: ^[[18l
18599 # RM forbid SS2 keyboard mode: ^[[?<l
18600 # SM scroll mode: ^[[=h
18601 # FCF enable XON/XOFF: ^[P1s^[\
18602 # MTL select end msg character: ^[[^Wp
18603 # EMI enable keyboard: ^[b
18604 # RIS retour etat initial: ^[c
18605 # enable FC keypad: ^[[?<h,
18606 # MPW map status line window: ^[PY99:98^[\
18607 # SCP select status line: ^[[0;98v
18608 # ED erase entire partition: ^[[2J
18609 # SCP select main partition: ^[[v
18610 # SM character insertion mode: ^[[4h
18611 # RM character replacement mode: ^[[4l
18612 # COO cursor on: ^[[r
18613 # COO cursor off: ^[[1r
18614 # SGR dim (turquoise) rev attr: ^[[2;7m
18615 # SGR Data normal attr: ^[[m
18616 # SO Line-graphic mode ON: ^N
18617 # SI Line-graphic mode OFF: ^O
18618 # MC start routing to printer: ^[[5i
18619 # MC stop routing to printer: ^M^[[4i
18622 # This entry covers the following terminals:
18623 # dku7102, tws2102, and tws models 2105 to 2112
18624 tws-generic|dku7102|Bull Questar tws terminals,
18625 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18626 cols#80, it#8, lines#24, wsl#80,
18627 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18628 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18629 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18630 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18631 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18632 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18633 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18634 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18635 il1=\E[L, ind=^J, invis=\E[0;8m,
18636 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18637 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18638 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18639 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18640 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18641 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18642 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18643 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18644 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18645 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18646 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18647 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18648 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18649 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18650 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18651 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18652 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18654 tws2103|xdku|BULL Questar tws2103,
18655 ht=^I, use=tws-generic,
18656 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18657 ht=^I, use=tws2102-sna,
18658 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18659 clear=\E[2J\E[H, cup@, dl@, dl1@,
18660 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18661 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18663 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18664 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18665 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18666 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18668 #=========================================================#
18669 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18670 #=========================================================#
18672 # Description written by J. Staerck (BULL SA)
18673 # Copyright (c) 1989 BULL SA
18674 #---------------------------------------------------------------------------
18675 # This entry is used for terminals with vt320 emulation mode
18676 # and following set-up :
18677 # 8 bit ISO Latin Character Set (ISO 8859-1),
18678 # 7 bit Control Characters,
18679 # 80 columns screen.
18680 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18681 # They are used in string capabilities with vt220-320 emulation mode.
18682 # In the following DEC definitions, two kinds of terminfo databases are
18684 # 1. the first with Command Sequence Introducer starting with escape
18685 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18686 # 2. the second with Command Sequence Introducer starting with escape
18687 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18688 # Soft Terminal Reset esc [ ! p
18689 # RIS (erases screen): esc c
18690 # DECKPNM numeric keypad mode: esc >
18691 # DECKPAM applic. keypad mode: esc =
18692 # DECSTBM Scrolling region: esc [ r
18693 # SCS select G0 = US: esc ( B
18694 # SCS select G1 = line-graphic: esc ) 0
18695 # Select 7-bit C1 controls: esc sp F
18696 # Select 8-bit C1 controls: esc sp G
18697 # Select cursor home: esc [ H
18698 # Select erase screen: esc [ J
18699 # SM KAM lock keyboard: esc [ 2 h
18700 # RM KAM unlock keyboard: esc [ 2 l
18701 # SM SRM local echo off: esc [ 1 2 h
18702 # RM SRM local echo on: esc [ 1 2 l
18703 # SM LNM New line : esc [ 2 0 h
18704 # RM LNM return = CR only: esc [ 2 0 l
18705 # SM DECCKM cursor keys mode: esc [ ? 1 h
18706 # RM DECCKM appli. keys mode: esc [ ? 1 l
18707 # SM DECANM ANSI mode on: esc [ ? 2 h
18708 # RM DECANM ANSI mode off: esc [ ? 2 l
18709 # SM DECCOLM 132-column screen: esc [ ? 3 h
18710 # RM DECCOLM 80-column screen: esc [ ? 3 l
18711 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18712 # RM DECSCLM Jump scroll: esc [ ? 4 l
18713 # SM DECSCNM screen light backgr. esc [ ? 5 h
18714 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18715 # SM DECOM move within margins: esc [ ? 6 h
18716 # RM DECOM move outside margins: esc [ ? 6 l
18717 # SM DECAWM auto right margin: esc [ ? 7 h
18718 # RM DECAWM auto right margin: esc [ ? 7 l
18719 # SM DECARM auto repeat: esc [ ? 8 h
18720 # RM DECARM auto repeat: esc [ ? 8 l
18721 # DECSASD Select active main: esc [ 0 $ }
18722 # DECSASD Select active status: esc [ 1 $ }
18723 # DECSSDT Select status none: esc [ 0 $ ~
18724 # DECSSDT Select status indic.: esc [ 1 $ ~
18725 # DECSSDT Select status host-wr: esc [ 2 $ ~
18726 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18727 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18728 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18729 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18730 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18731 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18732 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18733 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18734 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18735 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18736 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18737 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18738 # Char. and Line attributes: esc [ Ps ... Ps m
18739 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18740 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18743 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18744 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18745 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
18746 cols#80, it#8, lines#24, vt#3, wsl#80,
18747 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18748 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18749 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18750 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18751 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18752 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18753 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18754 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18755 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18756 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18757 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18758 is1=\E[63;1"p\E[2h,
18759 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18760 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18761 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18762 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18763 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18764 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18765 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18766 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18767 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18768 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18769 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
18770 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18771 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
18773 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18774 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18775 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18776 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
18777 bq300-rv|Bull vt320 reverse 80 columns,
18778 flash=\E[?5l$<50>\E[?5h,
18779 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18781 bq300-w|Bull vt320 132 columns,
18783 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18784 rs2=\E[?3h, use=bq300,
18785 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18787 flash=\E[?5l$<50>\E[?5h,
18788 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18789 rs2=\E[?3h, use=bq300,
18791 # This entry is used for terminals with vt320 emulation mode
18792 # and following set-up :
18793 # 8 bit ISO Latin Character Set (ISO 8859-1),
18794 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18795 # 80 columns screen.
18796 # Soft Terminal Reset csi ! p
18797 # RIS (erases screen): esc c
18798 # DECKPNM numeric keypad mode: esc >
18799 # DECKPAM applic. keypad mode: esc =
18800 # DECSTBM Scrolling region: esc [ r
18801 # SCS select G0 = US: esc ( B
18802 # SCS select G1 = line-graphic: esc ) 0
18803 # Select 7-bit C1 controls: esc sp F
18804 # Select 8-bit C1 controls: esc sp G
18805 # Select cursor home: csi H
18806 # Select erase screen: csi J
18807 # SM KAM lock keyboard: csi 2 h
18808 # RM KAM unlock keyboard: csi 2 l
18809 # SM SRM local echo off: csi 1 2 h
18810 # RM SRM local echo on: csi 1 2 l
18811 # SM LNM New line : csi 2 0 h
18812 # RM LNM return = CR only: csi 2 0 l
18813 # SM DECCKM cursor keys mode: csi ? 1 h
18814 # RM DECCKM appli. keys mode: csi ? 1 l
18815 # SM DECANM ANSI mode on: csi ? 2 h
18816 # RM DECANM ANSI mode off: csi ? 2 l
18817 # SM DECCOLM 132-column screen: csi ? 3 h
18818 # RM DECCOLM 80-column screen: csi ? 3 l
18819 # SM DECSCLM Smooth scroll: csi ? 4 h
18820 # RM DECSCLM Jump scroll: csi ? 4 l
18821 # SM DECSCNM screen light backgr. csi ? 5 h
18822 # RM DECSCNM screen dark backgr. csi ? 5 l
18823 # SM DECOM move within margins: csi ? 6 h
18824 # RM DECOM move outside margins: csi ? 6 l
18825 # SM DECAWM auto right margin: csi ? 7 h
18826 # RM DECAWM auto right margin: csi ? 7 l
18827 # SM DECARM auto repeat: csi ? 8 h
18828 # RM DECARM auto repeat: csi ? 8 l
18829 # DECSASD Select active main: csi 0 $ }
18830 # DECSASD Select active status: csi 1 $ }
18831 # DECSSDT Select status none: csi 0 $ ~
18832 # DECSSDT Select status indic.: csi 1 $ ~
18833 # DECSSDT Select status host-wr: csi 2 $ ~
18834 # SM DECTCEM Visible cursor: csi ? 2 5 h
18835 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18836 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18837 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18838 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18839 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18840 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18841 # Char. and Line attributes: csi Ps ... Ps m
18842 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18843 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18844 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18845 bq300-8|Bull vt320 full 8 bits 80 columns,
18846 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18847 cols#80, it#8, lines#24, vt#3, wsl#80,
18848 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18849 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18850 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18851 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18852 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18853 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18854 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
18855 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18856 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18857 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18858 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
18859 ind=\ED, is1=\E[63;2"p\E[2h,
18860 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18861 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18862 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18863 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18864 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18865 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18866 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18867 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18868 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18869 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18870 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18871 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18872 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
18873 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
18874 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
18875 s0ds=\E(B, s1ds=\E(0, sc=\E7,
18876 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18877 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
18878 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18879 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18880 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18881 flash=\233?5l$<50>\233?5h,
18882 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18884 bq300-8w|Bull vt320 8-bit 132 columns,
18886 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18887 rs2=\233?3h, use=bq300-8,
18888 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18890 flash=\233?5l$<50>\233?5h,
18891 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18892 rs2=\233?3h, use=bq300-8,
18894 # This entry is used for terminals with vt320 emulation mode
18895 # a 102 keys keyboard (PC scancode !) and following set-up :
18896 # 8 bit ISO Latin Character Set (ISO 8859-1),
18897 # 7 bit Control Characters,
18898 # 80 columns screen.
18899 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18900 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18901 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18902 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18903 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18904 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18905 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18906 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18907 flash=\E[?5l$<50>\E[?5h,
18908 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18910 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18912 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18913 rs2=\E[?3h, use=bq300-pc,
18914 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18916 flash=\E[?5l$<50>\E[?5h,
18917 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18918 rs2=\E[?3h, use=bq300-pc,
18919 # 8 bit ISO Latin Character Set (ISO 8859-1),
18920 # 8 bit Control Characters,
18921 # 80 columns screen.
18922 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18923 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18924 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18925 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18926 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18927 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18928 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18929 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18930 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18931 flash=\E[?5l$<50>\E[?5h,
18932 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18934 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18936 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18937 rs2=\E[?3h, use=bq300-8-pc,
18938 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18940 flash=\E[?5l$<50>\E[?5h,
18941 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18942 rs2=\E[?3h, use=bq300-8-pc,
18944 #======================================================#
18945 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18946 #======================================================#
18948 # normal mode, 8 bits, 80 columns terminal.
18950 # RIS reset initial state: ^[c
18951 # BLE bell enable ^[h
18952 # BLD bell disable ^[g
18953 # CAMS char. attr. mode set ^[[D
18954 # CAMR char. attr. mode reset ^[[G
18956 # KBU keyboard unlock (set) ^[[W
18957 # KBL keyboard lock (reset) ^[[X
18958 # CM character mode (async.) ^[k
18959 # NEP non echoplex mode (by host) ^[l
18960 # EP echoplex mode (by host) ^[m
18961 # IM insert mode set ^[[I
18962 # IM insert mode reset ^[[J
18963 # RMS roll mode set ^[r
18964 # RMR roll mode reset ^[q
18965 # SM78 set mode vip7800 ^[[1q
18966 # SD scroll up (72 lines) ^[[0s
18967 # SD scroll down (72 lines) ^[[1s
18968 # RBM block mode reset ^[[E
18969 # SLS status line set ^[w
18970 # SLR status line reset ^[v
18971 # SLL status line lock ^[O
18972 # LGS Line-graphic mode set ^[G
18973 # LGR Line-graphic mode reset ^[F
18974 # TBC tab clear (at cursor pos.) ^[[g
18975 # TBI tab initialize ^[[N
18976 # TBS tab set (at cursor pos.) ^[p
18977 # PDS print data space ^[[0p
18978 # PHD print host data ^[[3p
18979 # PDT print data terminator ^[[<p
18980 # PRES print adapter reset ^[[2p
18981 # SSPR multi-part. reset ^[[<>u
18982 # SSP0 partition 0 set ^[[00u
18983 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18984 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18985 # SSP3 partition n format 3 ^[[PnPnu
18986 # ATR attribute (visual)
18989 # hide (blank) : ^[sH
18991 # inverse video : ^[sI
18996 # This covers the vip7800 and BQ3155-vip7800
18997 vip|Bull Questar 3155-7800,
18998 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18999 cols#80, it#8, lines#24, vt#3, wsl#80,
19000 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
19001 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19002 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
19003 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
19004 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
19005 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
19006 is2=\E[00u\E[<>001001024080024080u\E[01u,
19007 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
19008 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
19009 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
19010 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
19011 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
19012 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
19013 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
19014 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
19015 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
19016 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
19017 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
19018 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
19019 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
19020 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
19021 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
19022 smul=\Es_, tbc=\E[N, tsl=\Ew,
19023 # normal screen, 8 bits, 132 columns terminal.
19024 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
19026 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
19027 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
19029 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
19030 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
19031 cols#132, lines#72, wsl#132,
19032 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
19037 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
19038 # that is smaller than the screen, and puts up a warning message
19039 # outside the window. Te erases the warning message, puts the
19040 # window back to be the whole screen, and puts the cursor at just
19041 # below the small window. I defined <cnorm> and <civis> to really turn
19042 # the cursor on and off, but I have taken this out since I don't
19043 # like the cursor being turned off when vi exits.
19044 cg7900|chromatics|chromatics 7900,
19047 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
19048 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
19049 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
19050 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
19051 rmso=\001C1\,\001c2\,,
19052 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
19053 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
19055 #### Computer Automation
19058 ca22851|computer automation 22851,
19061 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
19062 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
19063 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
19068 # This entry has correct padding and the undocumented "ri" capability
19069 cyb83|xl83|cybernex xl-83,
19072 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
19073 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
19074 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
19075 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
19076 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
19077 cyb110|mdl110|cybernex mdl-110,
19080 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
19081 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19082 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
19083 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
19084 ht=\011$<43>, ich1=\016A\035$<3.5>,
19085 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
19089 # Datapoint is gone. They used to be headquartered in Texas.
19090 # They created ARCnet, an Ethernet competitor that flourished for a while
19091 # in the early 1980s before 3COM got wise and cut its prices. The service
19092 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
19095 dp3360|datapoint|datapoint 3360,
19098 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
19099 ed=^_, el=^^, home=^], ind=^J,
19101 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
19102 # The Datapoint 8242 Workstation was sold at least between 1985
19103 # and 1989. To make the terminal work with this entry, press
19104 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
19105 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
19106 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
19107 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
19108 # fact unusable because the strings sent by the terminal conflict
19109 # with other keys).
19110 # The terminal is capable of displaying "box draw" characters.
19111 # For each graphic character you must send 2 ESC's (\E\E) followed
19112 # by a control character as follows:
19113 # character meaning
19114 # ========= =======
19117 # ctrl-G bottom tee
19120 # ctrl-J top left corner
19121 # ctrl-K top right corner
19122 # ctrl-L bottom left corner
19123 # ctrl-M bottom right corner
19124 # ctrl-N horizontal line
19125 # ctrl-O vertical line
19126 # Unfortunately this cannot be fitted into the termcap/terminfo
19127 # description scheme.
19128 dp8242|datapoint 8242,
19131 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
19132 cr=^M, cub1=^H, cud1=^J,
19133 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
19134 home=^U, ht=^I, il1=\E^T, ind=^C,
19135 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19136 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
19137 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
19138 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
19139 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
19140 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19141 smso=\E^E, smul=\E^F,
19142 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
19144 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
19146 # These entries are DEC's official terminfos for its older terminals.
19147 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
19148 # Engineering for more information. Updated terminfos and termcaps
19149 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
19155 bel=^G, cr=^M, cub1=^H, cud1=^J,
19159 bel=^G, cr=^M, cub1=^H, cud1=^J,
19163 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19164 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19168 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19169 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19170 el=\EK, ht=^I, ind=^J, ri=\EI,
19171 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19172 vt61|vt-61|vt61.5|dec vt61,
19174 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19175 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19176 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19177 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19180 # The gigi does standout with red!
19181 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19182 gigi|vk100|dec gigi graphics terminal,
19185 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19186 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19187 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19188 el=\E[K, ht=^I, ind=^J,
19189 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19190 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19191 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19192 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19193 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19196 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19197 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19198 # grossly-overpriced failure (among other things, DEC's OS didn't include
19199 # a format program, so you had to buy pre-formatted floppies from DEC at
19200 # a hefty premium!).
19201 pro350|decpro|dec pro console,
19203 cols#80, it#8, lines#24,
19204 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19205 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19206 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19207 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19208 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19209 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19210 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19215 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19216 dw2|decwriter|dw|decwriter II,
19219 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19220 # \E(B Use U.S. character set (otherwise # => british pound !)
19221 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19222 # \E[w 10 char/in pitch
19223 # \E[1;132 full width horizontal margins
19224 # \E[2g clear all tab stops
19226 # \E[66t 66 lines/page (for \f)
19227 # \E[1;66r full vertical page can be printed
19228 # \E[4g clear vertical tab stops
19229 # \E> disable alternate keypad mode (so it transmits numbers!)
19230 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19231 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19234 # The dw3 does standout with wide characters.
19236 dw3|la120|decwriter III,
19239 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19240 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19241 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19242 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19246 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19247 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19249 # These aren't official
19250 ln03|dec ln03 laser printer,
19253 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19254 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19256 ln03-w|dec ln03 laser printer 132 cols,
19258 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19259 kcud1=^J, nel=^M^J, use=ln03,
19261 #### Delta Data (dd)
19264 # Untested. The cup sequence is hairy enough that it probably needs work.
19265 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19266 # There are BSD-derived termcap entries floating around for this puppy
19267 # that are *certainly* wrong.
19268 delta|dd5000|delta data 5000,
19271 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19272 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19273 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19275 #### Digital Data Research (ddr)
19278 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19279 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19281 cols#80, it#8, lines#24, vt#3,
19282 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19283 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19284 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19285 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19286 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19287 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19288 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19289 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19290 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19291 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19292 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19295 #### Evans & Sutherland
19298 # Jon Leech <leech@cs.unc.edu> tells us:
19299 # The ps300 was the Evans & Sutherland Picture System 300, a high
19300 # performance 3D vector graphics system with a bunch of specialized hardware.
19301 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19302 # evolutions including (limited) color versions such as the PS330C. PS300s
19303 # were effectively obsolete by the late 80s, replaced by raster graphics
19304 # systems, although specialized applications like molecular modelling
19305 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19306 # are out of production, though of course E&S is very much alive (in 1996).
19307 # (ps300: changed ":pt@:" to "it@" -- esr)
19309 ps300|Picture System 300,
19312 rmso@, rmul@, smso@, smul@, use=vt100,
19314 #### General Electric (ge)
19317 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19320 bel=^G, cr=^M, cud1=^J, ind=^J,
19322 #### Heathkit/Zenith
19325 # Here is a description of the H19 DIP switches:
19328 # 0-3 = baud rate as follows:
19333 # 0 1 0 1 1200 baud
19334 # 1 0 0 0 2400 baud
19335 # 1 0 1 0 4800 baud
19336 # 1 1 0 0 9600 baud
19337 # 1 1 0 1 19.2K baud
19339 # 4 = parity (0 = no parity)
19340 # 5 = even parity (0 = odd parity)
19341 # 6 = stick parity (0 = normal parity)
19342 # 7 = full duplex (0 = half duplex)
19345 # 0 = block cursor (0 = underscore cursor)
19346 # 1 = no key click (0 = keyclick)
19347 # 2 = wrap at end of line (0 = no wrap)
19348 # 3 = auto LF on CR (0 = no LF on CR)
19349 # 4 = auto CR on LF (0 = no CR on LF)
19350 # 5 = ANSI mode (0 = VT52 mode)
19351 # 6 = keypad shifted (0 = keypad unshifted)
19352 # 7 = 50Hz refresh (1 = 60Hz refresh)
19354 # Factory Default settings are as follows:
19356 # S401 1 0 0 0 1 1 0 0
19357 # S402 0 0 0 0 0 0 0 0
19358 # (h19: I added <rmam>/<smam> based on the init string;
19359 # also added empty <acsc> to suppress a tic warning -- esr)
19360 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19361 OTbs, am, mir, msgr,
19362 cols#80, it#8, lines#24,
19363 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19364 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19365 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19366 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19367 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19368 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19369 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19370 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19371 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19372 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19373 h19-bs|heathkit w/keypad shifted,
19374 rmkx=\Eu, smkx=\Et, use=h19-b,
19375 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19376 rmkx=\Eu, smkx=\Et, use=h19-u,
19377 # (h19: merged in <ip> from BSDI hp19-e entry>;
19378 # also added empty <acsc> to suppress a tic warning --esr)
19379 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19380 # Tim tells us that:
19381 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19382 # This terminal suffers from the same famous insert-mode padding lossage
19383 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19384 # unusable on this box, since even a half-scroll up or down the window
19385 # causes flaming terminal death.
19387 # On the Z19, the only way I have found around this problem is to remove
19388 # the :al: and :dl: entries entirely. No amount of extra padding will
19389 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19390 # makes Emacs a little slower, but it remains in the land of the living.
19392 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19393 OTbs, am, eslok, hs, mir, msgr,
19394 cols#80, it#8, lines#24,
19395 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19396 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19397 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19398 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19399 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19400 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19401 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19402 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19403 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19404 h19-u|heathkit with underscore cursor,
19405 cnorm@, cvvis@, use=h19-b,
19406 h19-g|h19g|heathkit w/block cursor,
19407 cnorm=\Ex4, cvvis@, use=h19-b,
19408 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19410 dl1=\EM, il1=\EL, use=h19,
19412 # The major problem with the Z29 is that it requires more padding than the Z19.
19414 # The problem with declaring an H19 to be synonymous with a Z29 is that
19415 # it needs more padding. It especially loses if a program attempts
19416 # to put the Z29 into insert mode and insert text at 9600 baud. It
19417 # even loses worse if the program attempts to insert tabs at 9600
19418 # baud. Adding padding to text that is inserted loses because in
19419 # order to make the Z29 not die, one must add so much padding that
19420 # whenever the program tries to use insert mode, the effective
19421 # rate is about 110 baud.
19423 # What program would want to put the terminal into insert mode
19424 # and shove stuff at it at 9600 baud you ask?
19426 # Emacs. Emacs seems to want to do the mathematically optimal
19427 # thing in doing a redisplay rather than the practical thing.
19428 # When it is about to output a line on top of a line that is
19429 # already on the screen, instead of just killing to the end of
19430 # the line and outputting the new line, it compares the old line
19431 # and the new line and if there are any similarities, it
19432 # constructs the new line by deleting the text on the old line
19433 # on the terminal that is already there and then inserting new
19434 # text into the line to transform it into the new line that is
19435 # to be displayed. The Z29 does not react kindly to this.
19437 # But don't cry for too long.... There is a solution. You can make
19438 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19439 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19440 # line will be really slow", you say. Well there is a sort of a
19441 # solution to that too. There is an insert character option on
19442 # the Z29 that will insert one character. Unfortunately, it
19443 # involves putting the terminal into ansi mode, inserting the
19444 # character, and changing it back to H19 mode. All this takes 12
19445 # characters. Pretty expensive to insert one character, but it
19446 # works. Either Emacs doesn't try to use its inserting hack when
19447 # it's only given an insert character ability or the Z29 doesn't
19448 # require padding with this (the former is probably more likely,
19449 # but I haven't checked it out).
19450 # (z29: added empty <acsc> to suppress a tic warning, merged in
19451 # status line capabilities from BRL entry --esr)
19452 z29|zenith29|z29b|zenith z29b,
19453 OTbs, OTpt, am, eslok, hs, mir, msgr,
19454 OTkn#10, cols#80, lines#24,
19455 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19456 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19457 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19458 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19459 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19460 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19461 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19462 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19463 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19464 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19465 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19466 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19467 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19468 # the world is stable. <rs1> causes the terminal to be reset to the state
19469 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19470 # cursor, bc -> block cursor.
19471 # From: Mike Meyers
19472 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19473 # looks vt100-compatible -- esr)
19474 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19475 OTbs, OTpt, am, eslok, hs, mir, msgr,
19476 OTkn#10, cols#80, it#8, lines#24,
19477 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19478 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19479 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19480 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19481 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19482 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19483 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19484 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19485 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19486 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19487 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19488 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19489 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19490 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19491 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19492 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19493 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19494 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19496 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19497 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19499 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19500 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19502 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19503 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19504 am, eslok, hs, mc5i, mir, msgr, xon,
19506 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19507 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19508 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19509 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19510 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19511 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19512 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19513 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19514 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19515 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19516 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19517 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19518 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19519 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19520 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19521 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19522 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19523 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19524 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19526 # From: Brad Brahms <Brahms@USC-ECLC>
19527 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19528 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19529 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19530 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19531 OTbs, OTpt, mir, msgr,
19532 OTkn#10, cols#80, it#8, lines#24,
19533 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19534 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19535 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19536 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19537 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19538 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19539 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19540 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19541 smir=\E@, smso=\Ep,
19542 p19|h19-b with il1/dl1,
19543 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19544 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19545 # (ztx: removed duplicate :sr: -- esr)
19546 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19547 OTbs, am, eslok, hs,
19548 cols#80, it#8, lines#24,
19549 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19550 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19551 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19552 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19553 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19554 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19555 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19556 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19558 #### IMS International (ims)
19560 # There was a company called IMS International located in Carson City,
19561 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19562 # bus/Z80 hardware and a line of terminals called Ultimas.
19565 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19566 ims950-b|bare ims950 no init string,
19568 # (ims950: removed obsolete ":ko@:" -- esr)
19569 ims950|ims televideo 950 emulation,
19571 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19572 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19573 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19574 ims950-rv|ims tvi950 rev video,
19576 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19577 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19578 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19580 cols#80, it#8, lines#24,
19581 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19582 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19583 ht=^I, if=/usr/share/tabset/vt100,
19584 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19585 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19586 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19589 #### Intertec Data Systems
19591 # I think this company is long dead as of 1995. They made an early CP/M
19592 # micro called the "Intertec Superbrain" that was moderately popular,
19593 # then sank out of sight.
19596 superbrain|intertec superbrain,
19599 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19600 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19601 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19602 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19603 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19604 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19605 # and the reverse is actually true. Try it. -- esr)
19606 intertube|intertec|Intertec InterTube,
19609 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19610 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19611 ind=^J, rmso=\E0@, smso=\E0P,
19612 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19613 # are typing and a command comes in, the keystrokes you type get interspersed
19614 # with the command and it messes up
19615 intertube2|intertec data systems intertube 2,
19617 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19618 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19619 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19621 #### Ithaca Intersystems
19623 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19624 # past. They used to be reachable at:
19626 # Ithaca Intersystems
19627 # 1650 Hanshaw Road
19628 # Ithaca, New York 14850
19630 # However, the outfit went bankrupt years ago.
19633 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19634 # These entries were written (originally in termcap syntax) by Brian Yandell
19635 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19636 # University of Wisconsin.
19638 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19639 # removed <if=/usr/share/tabset/init.graphos> and
19640 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19641 graphos|graphos III,
19643 cols#80, it#8, lines#24,
19644 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19645 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19646 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19647 cuu=\E[%p1%dA, cuu1=\E[A,
19648 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19649 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19650 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19651 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19652 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19653 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19654 smir=\E[4h, smso=\E[7m,
19655 graphos-30|graphos III with 30 lines,
19657 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19661 # These people used to be reachable at:
19664 # 1393 Main Street,
19665 # Waltham, MA 02154
19666 # Vox: (617)-890-5796.
19668 # However, if you call that number today you'll get an insurance company.
19669 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19670 # 26 Feb 1997 that says:
19672 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19673 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19674 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19675 # panel-mount etc). I can be emailed at sonfour@aol.com
19677 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19678 # dated 1984. According to the manual, it featured Tek 4010/4014
19679 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19682 modgraph|mod24|modgraph terminal emulating vt100,
19685 cvvis=\E\^9;0s\E\^7;1s,
19686 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19687 rf@, ri=\EM\E[K$<5/>, use=vt100,
19688 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19689 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19691 cols#80, it#8, lines#24,
19692 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19693 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19694 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19695 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19698 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19699 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19700 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19701 # mark and using delete-to-killbuffer work correctly. However, we would
19702 # like normal mode of operation to be using a Modgraph with 48 line setting.
19703 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19704 # the setting mark and delete-to-killbuffer results in the deletion of only
19705 # the line the mark is set on.
19706 # We've discovered that the delete-to-killbuffer works correctly
19707 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19708 # the first line disappears but a ctrl-l shows that it did work
19710 modgraph48|mod|Modgraph w/48 lines,
19711 OTbs, OTpt, am, xenl,
19712 cols#80, it#8, lines#48, vt#3,
19713 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19714 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19715 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19716 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19717 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19718 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19719 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19720 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19721 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19722 smso=\E[7m, smul=\E[4m,
19724 #### Morrow Designs
19726 # This was George Morrow's company. They started in the late 1970s making
19727 # S100-bus machines. They used to be reachable at:
19730 # 600 McCormick St.
19731 # San Leandro, CA 94577
19733 # but they're long gone now (1995).
19736 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19737 # Jeff's specimen was dated June 1984.
19738 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19739 mt70|mt-70|Morrow MD-70; native Morrow mode,
19740 am, mir, msgr, xon,
19741 cols#80, it#8, lines#24,
19742 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19743 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19744 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19745 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19746 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19747 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19748 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19749 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19750 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19751 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19752 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19753 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19754 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19755 smul=\EG1, tbc=\E0, use=adm+sgr,
19760 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19762 ex155|Motorola Exorterm 155,
19764 OTkn#5, OTug#1, cols#80, lines#24,
19765 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19766 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19767 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19768 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19769 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19773 # This company is still around in 1995, manufacturing point-of-sale systems.
19775 omron|Omron 8025AG,
19778 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19779 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19780 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19784 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19785 # were competition for things like the Tektronics 4025.
19788 # Ramtek 6221 from BRL, probably by Doug Gwyn
19789 # The following SET-UP modes are assumed for normal operation:
19790 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19791 # NEWLINE_OFF 80_COLUMNS
19792 # Other SET-UP modes may be set for operator convenience or communication
19793 # requirements; I recommend
19794 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19795 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19796 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19797 # Note that the Control-E key is useless on this brain-damaged terminal. No
19798 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19799 rt6221|Ramtek 6221 80x24,
19800 OTbs, OTpt, msgr, xon,
19801 OTkn#4, cols#80, it#8, lines#24, vt#3,
19802 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19803 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19804 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19805 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19806 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19807 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19808 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19809 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19810 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19811 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19812 rmso=\E[m, rmul=\E[m,
19813 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19814 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19815 smul=\E[4m, tbc=\E[3g,
19816 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19817 rt6221-w|Ramtek 6221 160x48,
19818 cols#160, lines#48,
19819 ll=\E[48;1H, use=rt6221,
19824 # RCA VP3301 or VP3501
19825 rca|rca vp3301/vp3501,
19828 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19829 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19835 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19836 # The following SET-UP modes are assumed for normal operation:
19837 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19838 # ONLINE ANSI CURSOR_VISIBLE
19839 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19840 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19841 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19842 # For use with graphics software, all graphics modes should be set to factory
19843 # default. Other SET-UP modes may be set for operator convenience or
19844 # communication requirements. No delays are specified; use "stty ixon -ixany"
19845 # to enable DC3/DC1 flow control!
19846 # I commented out the scrolling capabilities since they are too slow.
19847 hirez100|Selanar HiREZ-100,
19848 OTbs, OTpt, mir, msgr, xon,
19849 OTkn#4, cols#80, it#8, lines#48, vt#3,
19850 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19851 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19852 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19853 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19854 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19855 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19856 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19857 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19858 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19859 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19860 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19861 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19862 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19863 smul=\E[4m, tbc=\E[3g,
19864 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19865 cols#132, use=hirez100,
19870 # From University of Wisconsin
19871 vsc|Signetics Vsc Video driver by RMC,
19873 cols#80, it#8, lines#26,
19874 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19875 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19876 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19877 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19881 # Alan Frisbie <frisbie@flying-disk.com> writes:
19883 # As you may recall, the Soroc logo consisted of their name,
19884 # with the letter "S" superimposed over an odd design. This
19885 # consisted of a circle with a slightly smaller 15 degree (approx.)
19886 # wedge with rounded corners inside it. The color was sort of
19887 # a metallic gold/yellow.
19889 # If I had been more of a beer drinker it might have been obvious
19890 # to me, but it took a clue from their service department to make
19891 # me exclaim, "Of course!" The circular object was the top of
19892 # a beer can (the old removable pop-top style) and "Soroc" was an
19893 # anagram for "Coors".
19895 # I can just imagine the founders of the company sitting around
19896 # one evening, tossing back a few and trying to decide what to
19897 # call their new company and what to use for a logo.
19900 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19901 soroc120|iq120|soroc|soroc iq120,
19902 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19903 kcuf1=^L, kcuu1=^K, use=adm3a,
19904 soroc140|iq140|soroc iq140,
19907 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19908 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19909 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19910 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19911 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19912 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19913 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19915 #### Southwest Technical Products
19917 # These guys made an early personal micro called the M6800.
19918 # The ct82 was probably its console terminal.
19921 # (swtp: removed obsolete ":bc=^D:" -- esr)
19922 swtp|ct82|southwest technical products ct82,
19925 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19926 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19927 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19928 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19929 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19933 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19935 # Synertek used to make ICs, various 6502-based single-board process
19936 # control and hobbyist computers, and assorted peripherals including a
19937 # series of small inexpensive terminals (I think they were one of the
19938 # first to have a "terminal-on-a-keyboard", where the terminal itself
19939 # was only slightly larger than the keyboard).
19941 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19942 # was a 40x24 terminal that could connect to a standard TV through a
19943 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19944 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19945 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19946 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19947 # ROM and 2 ROMs as character generators. They were incredibly simple,
19948 # and I've never had any problems with mine (witness the fact that mine
19949 # was made in 1981 and is still working great... I've blown the video
19950 # output transistor a couple of times, but it's a 2N2222 :-)
19952 # The KTM-3 (which is what is listed in the terminfo file) was their
19953 # attempt at putting a KTM-2 in a box (and some models came with a
19954 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19955 # control and escape sequences are very different. The KTM-3 was always
19956 # real broken, at least according to the folks I've talked to about it.
19958 # The padding in the entry is probably off--these terminals were very
19959 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19960 # anyone with any sanity replaced the ROMs with something that provided
19961 # a reasonable subset of VT100 functionality, since the usual ROMs were
19962 # obviously very primitive... oh, you could get an upgraded ROM from
19963 # Synertek for some incredible amount of money, but what hacker with an
19964 # EPROM burner would do that? :)
19966 # Sorry I don't have any contact info; I believe they were located in
19967 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19968 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19969 # business these days.
19972 # Tested, seems to work fine with vi.
19973 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19976 clear=^Z, cub1=^H, cuf1=^L,
19977 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19979 #### Tab Office Products
19981 # TAB Products Co. - Palo Alto, California
19982 # Electronic Office Products,
19983 # 1451 California Avenue 94304
19985 # I think they're out of business.
19988 # The tab 132 uses xon/xoff, so no padding needed.
19989 # <smkx>/<rmkx> have nothing to do with arrow keys.
19990 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19991 # Seems to be no way to get rid of status line.
19992 # The manual for this puppy was dated June 1981. It claims to be VT52-
19993 # compatible but looks more vt100-like.
19994 tab132|tab|tab132-15|tab 132/15,
19996 OTdN@, cols#80, lines#24, lm#96,
19997 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19998 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19999 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
20000 tab132-w|tab132 in wide mode,
20002 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
20003 tab132-rv|tab132 in reverse-video mode,
20004 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
20005 tab132-w-rv|tab132 in reverse-video/wide mode,
20006 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
20011 # Research Incorporated
20012 # 6425 Flying Cloud Drive
20013 # Eden Prairie, MN 55344
20014 # Vox: (612)-941-3300
20016 # The Teleray terminals were all discontinued in 1992-93. RI still services
20017 # and repairs these beasts, but no longer manufactures them. The Teleray
20018 # people believe that all the types listed below are very rare now (1995).
20019 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
20020 # Model 100) that were ANSI-compatible.
20022 # Note two things called "teleray". Reorder should move the common one
20023 # to the front if you have either. A dumb teleray with the cursor stuck
20024 # on the bottom and no obvious model number is probably a 3700.
20027 t3700|dumb teleray 3700,
20030 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
20031 t3800|teleray 3800 series,
20033 cols#80, it#8, lines#24,
20034 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20035 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
20036 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
20037 t1061|teleray|teleray 1061,
20038 OTbs, am, km, xhp, xt,
20039 cols#80, it#8, lines#24, xmc#1,
20040 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20041 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20042 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
20043 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
20044 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
20045 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
20046 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
20048 t1061f|teleray 1061 with fast PROMs,
20049 dl1=\EM, il1=\EL, ip@, use=t1061,
20050 # "Teleray Arpa Special", officially designated as
20051 # "Teleray Arpa network model 10" with "Special feature 720".
20052 # This is the new (1981) fast microcode updating the older "arpa" proms
20053 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
20054 # converts the keypad to programmable function keys, and has other goodies.
20055 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
20056 # programs handle such lossage properly.
20057 # Note: this is NOT the old termcap's "t1061f with fast proms."
20058 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
20059 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
20060 t10|teleray 10 special,
20062 cols#80, it#8, lines#24, xmc#2,
20063 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
20064 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20065 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20066 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
20068 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
20069 # back/forth words. Put the function keys (f1-f10) where they can be
20070 # found, and turn off the other magic keys along the top row, except
20071 # for line/local. Do the magic appropriate to make the page shifts work.
20072 # Also toggle ^S/^Q for those of us who use Emacs.
20074 am, da, db, mir, xhp, xt,
20076 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
20077 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
20078 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
20079 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
20080 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
20081 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
20082 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
20083 smso=\E[7m, smul=\E[4m,
20085 #### Texas Instruments (ti)
20088 # The Silent 700 was so called because it was built around a quiet thermal
20089 # printer. It was portable, equipped with an acoustic coupler, and pretty
20090 # neat for its day.
20091 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
20094 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
20097 # Texas Instruments 916 VDT 7 bit control mode
20099 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
20101 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
20102 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
20103 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20104 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
20105 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
20106 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
20107 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
20108 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
20109 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
20110 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
20111 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
20112 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
20113 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
20114 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
20117 # Texas Instruments 916 VDT 8 bit control mode
20119 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
20120 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
20121 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
20122 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
20123 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20124 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
20125 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
20127 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
20129 ti916-132|Texas Instruments 916 VDT vt220 132 column,
20130 cols#132, use=ti916,
20132 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
20134 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
20135 cols#132, use=ti916-8,
20136 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
20138 cols#80, it#8, lines#24,
20139 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20140 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20141 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20142 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20143 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20144 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20145 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
20146 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
20147 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
20148 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20149 smul=\E[4m, tbc=\E[3g,
20150 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
20152 cols#80, it#8, lines#24,
20153 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20154 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20155 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20156 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20157 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20158 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20159 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
20160 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
20161 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
20162 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20163 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20164 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20165 cols#132, use=ti924,
20166 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20167 cols#132, use=ti924-8,
20168 ti931|Texas Instruments 931 VDT,
20171 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20172 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20173 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20174 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20175 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20176 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20177 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20178 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20179 sgr0=\E4@, smso=\E4A, smul=\E4D,
20180 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20181 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20182 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20183 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20184 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20185 ti_ansi|basic entry for ti928,
20186 am, bce, eo, xenl, xon,
20187 colors#8, cols#80, it#8, lines#25, pairs#64,
20188 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20189 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20190 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20191 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20192 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20193 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20194 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20195 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20196 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20197 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20198 smso=\E[7m, smul=\E[4m,
20200 # 928 VDT 7 bit control mode
20202 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20203 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20204 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20205 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20206 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20207 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20209 # 928 VDT 8 bit control mode
20211 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20212 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20213 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20214 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20215 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20216 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20217 kpp=\233T, kprt=\23335~, use=ti_ansi,
20222 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20223 # had just <smso>=\EG6 which I think means standout was supposed to be
20224 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20225 # <invis> might work-- esr)
20226 zen30|z30|zentec 30,
20229 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20230 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20231 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20232 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20233 smul@, use=adm+sgr,
20234 # (zen50: this had extension capabilities
20235 # :BS=^U:CL=^V:CR=^B:
20236 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20237 # which were also in the original entry -- esr)
20238 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20239 zen50|z50|zentec zephyr,
20241 cols#80, lines#24, xmc#1,
20242 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20243 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20244 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20245 rmul@, smul@, use=adm+sgr,
20247 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20248 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20251 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20252 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20253 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20254 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20255 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20256 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20257 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20258 smso=\EM$, smul=\EM0,
20260 ######## OBSOLETE UNIX CONSOLES
20263 #### Apollo consoles
20265 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20266 # labeled HP700s now.
20269 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20270 apollo|apollo console,
20273 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20274 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20275 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20276 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20277 smso=\ES, smul=\EU, vpa=\EO+\s,
20279 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20280 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20281 # both these capabilities.
20282 apollo_15P|apollo 15 inch display,
20283 rmir@, smir@, use=vt132,
20284 apollo_19L|apollo 19 inch display,
20285 rmir@, smir@, use=vt132,
20286 apollo_color|apollo color display,
20287 rmir@, smir@, use=vt132,
20291 # This actually describes the generic SVr4 display driver for Intel boxes.
20292 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
20293 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
20294 att6386|at386|386at|AT&T WGS 6386 console,
20296 cols#80, it#8, lines#25,
20297 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20298 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
20299 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
20300 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20301 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20302 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20303 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20304 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
20305 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
20306 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
20307 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20308 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
20309 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20310 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
20311 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
20312 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20314 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
20315 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
20316 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
20317 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
20318 pc6300plus|AT&T 6300 plus,
20321 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
20322 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
20323 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
20324 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
20325 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
20326 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20327 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
20328 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
20329 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20330 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20332 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
20334 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
20335 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
20336 # is broken. All the special key sequences are broken, making it unusable
20337 # with Emacs. The problem stems from the following:
20339 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
20340 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
20341 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
20342 # uses resizable terminal windows, but the bundled terminal program always
20343 # uses an 80x24 window (and doesn't support seem to support a 132-column
20346 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
20347 # library which was a superset of SVr3.5 curses (called tam, for "terminal
20348 # access method".) tam includes support for real, overlapping windows,
20349 # onscreen function key labels, and bitmap graphics. But since the primary
20350 # user interface on the UNIX PC was a GUI program (ua, for "user
20351 # assistant",) and remote administration was considered important for the
20352 # machine, tam also supported VT100-compatible terminals attached to the
20353 # serial port or used across the StarLan network. To simulate the extra keys
20354 # not present on a VT100, users could press ESC and a two-letter sequence,
20355 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
20356 # however, were not the same as those sent by the actual Undo key. The
20357 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
20358 # (If you're interested in adding some of the tam calls to ncurses, btw, I
20359 # have the full documentation and several programs which use tam. It also
20360 # used an extended terminfo format to describe key sequences, special
20361 # highlighting modes, etc.)
20363 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
20364 # there are two sequences for every key-modifier combination (local keyboard
20365 # sequence and remote "VT100" sequence.) But I doubt many people are trying
20366 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
20367 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
20368 # seem to have been built from the manual describing the VT100 sequences.
20369 # This means it doesn't work for a real live UNIX PC.
20371 # FONTS: The UNIX PC also has a strange interpretation of "alternate
20372 # character set". Rather than the VT100 graphics you might expect, it allows
20373 # up to 8 custom fonts to be loaded at any given time. This means that
20374 # programs expecting VT100 graphics will usually be disappointed. For this
20375 # reason I have disabled the smacs/rmacs sequences, but they could easily be
20376 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
20377 # manpage), should you wish to do so:
20379 # SGR10 - Select font 0 - ESC [ 10 m or SO
20380 # SGR11 - Select font 1 - ESC [ 11 m or SI
20381 # SGR12 - Select font 2 - ESC [ 12 m
20383 # SGR17 - Select font 7 - ESC [ 17 m
20385 # Graphics for line drawing are not reliably found at *any* character
20386 # location because the UNIX PC has dynamically reloadable fonts. I use font
20387 # 0 for regular text and font 1 for italics, but this is by no means
20388 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
20390 # MISC: The cursor visible/cursor invisible sequences were swapped in the
20391 # distributed terminfo.
20393 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
20394 # the UNIX PC terminfo entry. The modified version works great with Lynx,
20395 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
20396 # attached by serial cable. In Emacs, even the Undo key works, and many
20397 # applications can now use the F1-F8 keys.
20400 # Terminfo entry for the AT&T Unix PC 7300
20401 # from escape(7) in Unix PC 7300 Manual.
20402 # Somewhat similar to a vt100-am (but different enough
20403 # to redo this from scratch.)
20405 # /***************************************************************
20407 # * FONT LOADING PROGRAM FOR THE UNIX PC
20409 # * This routine loads a font defined in the file ALTFONT
20410 # * into font memory slot #1. Once the font has been loaded,
20411 # * it can be used as an alternative character set.
20413 # * The call to ioctl with the argument WIOCLFONT is the key
20414 # * to this routine. For more information, see window(7) in
20415 # * the PC 7300 documentation.
20416 # ***************************************************************/
20417 # #include <string.h> /* needed for strcpy call */
20418 # #include <sys/window.h> /* needed for ioctl call */
20419 # #define FNSIZE 60 /* font name size */
20420 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
20422 # * The file /usr/lib/wfont/special.8.ft comes with the
20423 # * standard PC software. It defines a graphics character set
20424 # * similar to that of the Teletype 5425 terminal. To view
20425 # * this or other fonts in /usr/lib/wfont, use the command
20426 # * cfont <filename>. For further information on fonts see
20427 # * cfont(1) in the PC 7300 documentation.
20430 # struct altfdata /* structure for alt font data */
20432 # short altf_slot; /* memory slot number */
20433 # char altf_name[FNSIZE]; /* font name (file name) */
20437 # int wd; /* window in which altfont will be */
20438 # struct altfdata altf;
20439 # altf.altf_slot=1;
20440 # strcpy(altf.altf_name,ALTFONT);
20441 # for (wd =1; wd < 12; wd++) {
20442 # ioctl(wd, WIOCLFONT,&altf);
20446 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
20447 # they're confirmed by the man page for the System V display---esr)
20449 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
20451 cols#80, it#8, lines#24,
20452 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
20453 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
20454 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20455 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20456 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20457 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
20458 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
20459 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
20460 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
20461 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
20462 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
20463 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
20464 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
20465 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
20466 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
20467 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
20468 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
20469 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
20470 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
20471 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
20472 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
20473 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
20476 #### Convergent Technology
20478 # Burroughs bought Convergent shortly before it merged with Univac.
20479 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20480 # from 1991 or earlier).
20483 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20484 # (aws: removed unknown :dn=^K: -- esr)
20485 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20487 OTug#0, cols#80, lines#28, xmc#0,
20488 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20489 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20490 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20491 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20492 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20493 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20495 awsc|Convergent Technologies AWS workstation under CTOS,
20497 OTug#0, cols#80, lines#24, xmc#0,
20498 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20499 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20500 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20501 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20507 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20508 # The digital uVax II's had a graphic display called a qdss. It was
20509 # supposed to be a high performance graphic accelerator, but it was
20510 # late to market and barely appeared before faster dumb frame buffers
20511 # appeared. I have only used this display while running X11. However,
20512 # during bootup, it was in text mode, and probably had a terminal emulator
20513 # within it. And that is what your termcap entry is for. In graphics
20514 # mode the screen size is 1024x864 pixels.
20515 qdss|qdcons|qdss glass tty,
20517 cols#128, lines#57,
20518 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20519 cup=\E=%p1%c%p2%c, cuu1=^K,
20521 #### Fortune Systems consoles
20523 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20524 # in their day; I (esr) used one myself for a year or so around 1984.
20525 # They had no graphics, though, and couldn't compete against Suns and
20529 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20530 # (This had extension capabilities
20531 # :rv=\EH:re=\EI:rg=0:GG=0:\
20532 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20533 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20534 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20535 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20536 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20537 # to force both magic cookie glitches off. Once upon a time, I
20538 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20539 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20540 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20541 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20542 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20543 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20544 fos|fortune|Fortune system,
20547 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20548 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20549 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20550 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20551 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20552 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20553 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20554 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20555 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20556 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20557 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20558 smso=^\H`, smul=^\HP,
20560 #### Masscomp consoles
20562 # Masscomp has gone out of business. Their product line was purchased by
20563 # comany in Georgia (US) called "XS International", parts and service may
20564 # still be available through them.
20567 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20568 masscomp|masscomp workstation console,
20570 cols#80, it#8, lines#24,
20571 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20572 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20573 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20574 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20575 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20576 masscomp1|masscomp large screen version 1,
20577 cols#104, lines#36, use=masscomp,
20578 masscomp2|masscomp large screen version 2,
20579 cols#64, lines#21, use=masscomp,
20584 # OSF/1 1.1 Snapshot 2
20585 pmcons|pmconsole|PMAX console,
20587 cols#128, lines#57,
20588 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
20589 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20590 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
20592 #### Other consoles
20593 # The following is a version of the ibm-pc entry distributed with PC/IX,
20594 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
20595 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
20596 # (the former is untrue, and the latter failed under UCB/man); standout and
20597 # underline modes have been added. Note: this entry describes the "native"
20598 # capabilities of the PC monochrome display, without ANY emulation; most
20599 # communications packages (but NOT PC/IX connect) do some kind of emulation.
20600 pcix|PC/IX console,
20603 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
20604 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
20605 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
20608 # (ibmpcx: this entry used to be known as ibmx.
20609 # It formerly included the following extension capabilities:
20610 # :GC=b:GL=v:GR=t:RT=^J:\
20611 # :GH=\E[196g:GV=\E[179g:\
20612 # :GU=\E[193g:GD=\E[194g:\
20613 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
20614 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
20615 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
20616 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
20617 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
20618 # what was there before. -- esr)
20619 ibmpcx|xenix|ibmx|IBM PC xenix console display,
20622 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
20623 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20624 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
20625 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
20626 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
20627 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
20629 ######## OTHER OBSOLETE TYPES
20631 # These terminals are *long* dead -- these entries are retained for
20632 # historical interest only.
20635 #### Obsolete non-ANSI software emulations
20638 # CTRM terminal emulator
20639 # 1. underlining is not allowed with colors: first, is is simulated by
20640 # black on white, second, it disables background color manipulations.
20641 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20642 # so we have to save their status in the static registers A, B and H
20643 # respectively, to be able to restore them when color changes
20644 # (because any color change turns off ALL attributes)
20645 # 3. <bold> and <rev> sequences alternate modes,
20646 # rather than simply entering them. Thus we have to check the
20647 # static register B and H to determine the status, before sending the
20649 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20650 # and then reset colors
20651 # 5. implementation of the protect mode would badly penalize the performance.
20652 # we would have to use \E&bn sequence to turn off colors (as well as all
20653 # other attributes), and keep the status of protect mode in yet another
20654 # static variable. If someone really needs this mode, they would have to
20655 # create another terminfo entry.
20656 # 6. original color-pair is white on black.
20657 # store the information about colors into static registers
20658 # 7. set foreground color. it performs the following steps.
20659 # 1) turn off all attributes
20660 # 2) turn on the background and video attributes that have been turned
20661 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20662 # 3) turn on foreground attributes
20663 # 4) store information about foreground into U,V,W static registers
20664 # 8. turn on background: similar to turn on foreground above
20665 ctrm|C terminal emulator,
20667 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20668 pairs#63, pb#19200, vt#6,
20669 bel=^G, blink=\E&dA%{1}%PA,
20670 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20671 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20672 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20673 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20674 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20675 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20676 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20677 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20678 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20679 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20680 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20681 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20682 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20683 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20684 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20686 # gs6300 - can't use blue foreground, it clashes with underline;
20687 # it's simulated with cyan
20688 # Bug: The <op> capability probably resets attributes.
20689 # (gs6300: commented out <rmln> (no <smln>) --esr)
20690 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20691 am, bce, msgr, xon,
20692 colors#8, cols#80, it#8, lines#24, pairs#63,
20693 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20694 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20695 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20696 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20697 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20698 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20699 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20700 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20701 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20702 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20703 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20704 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20705 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20706 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20708 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20709 # MS-Kermit with Heath-19 emulation mode enabled
20710 # (h19k: changed ":pt@:" to ":it@"
20711 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20716 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20717 # Software (formerly Peripherals Computers & Supplies, Inc) of
20718 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20719 # also be reached at support@synergy.com.
20720 versaterm|versaterm vt100 emulator for the macintosh,
20722 cols#80, it#8, lines#24,
20723 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20724 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20725 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20726 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20727 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20728 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20729 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20730 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20731 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20732 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20733 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20734 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20737 # From: Rick Thomas <ihnp4!btlunix!rbt>
20738 # (xtalk: I added <rmam>/<smam> based on the init string.
20739 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20740 am, mir, msgr, xon,
20741 cols#80, it#8, lines#24, vt#3, xmc#1,
20742 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20743 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20744 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20745 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20746 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20747 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20748 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20749 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20750 rmkx=\E[?1l\E>, rmso=\E[m\s,
20751 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20752 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20753 tbc=\E[3g, use=vt100+fnkeys,
20755 # The official PC terminal emulator program of the AT&T Product Centers.
20756 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20757 simterm|attpc running simterm,
20760 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20761 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20762 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20763 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20765 #### Daisy wheel printers
20767 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20768 # wheel terminals. These are now largely obsolete.
20771 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20772 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20775 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20776 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20777 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20779 is2=\r \E9, use=diablo1620,
20780 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20781 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20782 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20784 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20786 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20788 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20789 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20791 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20792 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20793 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20794 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20795 # around all of memory. Note that return puts a blank ("a return character")
20796 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20797 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20798 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20799 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20800 # I have been unable to get tabs set in all 96 lines - it always leaves at
20801 # least one line with no tabs in it, and once you tab through that line,
20802 # it completely weirds out.
20803 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20806 cols#80, lines#24, lm#96,
20807 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20808 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20809 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20810 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20811 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20815 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20816 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20817 gsi|mystery gsi terminal,
20820 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20822 aj830|aj832|aj|anderson jacobson,
20824 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20826 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20827 aj510|Anderson-Jacobson model 510,
20830 clear=^L, cub1=^H, cuf1=\EX,
20831 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20832 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20833 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20834 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20835 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20837 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20838 # This is incomplete, but it's a start.
20839 nec5520|nec|spinwriter|nec 5520,
20842 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20843 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20845 qume5|qume|Qume Sprint 5,
20848 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20849 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20850 # I suspect the xerox 1720 is the same as the diablo 1620.
20851 xerox1720|x1720|x1750|xerox 1720,
20854 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20857 #### Miscellaneous obsolete terminals, manufacturers unknown
20859 # If you have any information about these (like, a manufacturer's name,
20860 # and a date on the serial-number plate) please send it!
20862 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20865 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20866 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20869 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20870 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20871 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20872 cops10|cops|cops-10|cops 10,
20875 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20876 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20877 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20879 # (d132: removed duplicate :ic=\E5:,
20880 # merged in capabilities from a BRL entry -- esr)
20881 d132|datagraphix|datagraphix 132a,
20884 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20885 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20886 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20887 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20888 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20889 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20890 # mode (which is what this entry looks like) and several other lesser-known
20893 OTbs, am, da, db, msgr, xhp,
20894 cols#80, it#8, lines#24,
20895 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20896 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20897 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20898 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20899 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20900 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20901 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20902 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20903 digilog|digilog 333,
20906 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20908 # The DWK was a terminal manufactured in the Soviet Union c.1986
20909 dwk|dwk-vt|dwk terminal,
20911 cols#80, it#8, lines#24,
20912 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20913 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20914 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20915 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20916 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20917 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20918 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20919 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20920 sgr0=\EX, smacs=\EF, smso=\ET,
20921 env230|envision230|envision 230 graphics terminal,
20923 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
20924 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20925 sgr0=\E[0m$<2>, smacs@, use=vt100,
20926 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20927 # coupler attached, the whole rig fitting in a suitcase and more or less
20928 # portable. Hot stuff for c.1977 :-) -- esr
20929 ep48|ep4080|execuport 4080,
20932 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20933 ep40|ep4000|execuport 4000,
20934 cols#136, use=ep4080,
20935 # Adam Thompson <athompso@pangea.ca> tells us:
20936 # Informer series - these are all portable units, resembling older
20937 # automatic bread-baking machines. The terminal looks like a `clamshell'
20938 # design, but isn't. The structure is similar to the Direct terminals,
20939 # but only half the width. The entire unit is only about 10" wide.
20940 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20941 # keyboard. All the keys are crammed together, much like some laptop
20942 # PCs today, but perhaps less well organized...all these units have a
20943 # bewildering array of plugs on the back, including a built-in modem.
20944 # The 305 was a color version of the 304; the 306 and 307 were mono and
20945 # color terminals built for IBM bisync protocols.
20946 # From: Paul Leondis <unllab@amber.berkeley.edu>
20947 ifmr|Informer D304,
20950 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20951 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20952 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20954 # Entry largely based on wy60 and has the features of wy60ak.
20955 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20956 am, bw, hs, km, mir, msgr, ul, xon,
20957 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20958 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20959 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20960 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20961 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20962 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20963 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20965 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20966 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20967 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20968 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20969 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20970 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20971 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20972 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20973 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20974 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20975 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20976 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20977 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20978 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20979 rs3=\EwG\Ee($<150>,
20980 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20981 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20982 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20983 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20984 uc=\EG8\EG0, use=adm+sgr,
20985 teletec|Teletec Datascreen,
20988 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20990 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20991 # This description is for the LANPAR Technologies VISION 3220
20992 # terminal from 1984/85. The function key definitions k0-k5 represent the
20993 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20994 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20996 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20997 # I had a couple of scopes (3221) like this once where I used to work, around
20998 # the 1987 time frame if memory serves me correctly. These scopes were made
20999 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
21000 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
21001 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
21002 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
21003 # (3221) cost about $1500 each, and one was always broken -- had to be sent
21004 # back to the shop for repairs.
21005 # The only real advantage these scopes had over the VT-240's were:
21006 # 1) They were faster in the Regis display, or at least the ones I did
21007 # 2) They had a handy debugging feature where you could split-screen the
21008 # scope, the graphics would appear on the top, and the REGIS commands would
21009 # appear on the bottom. I don't remember the VT-240s being able to do that.
21010 # I would swear that LANPAR Technologies was in MA someplace, but since I
21011 # don't work at the same place anymore, and those terminals and manuals were
21012 # long since junked, I cannot be any more sure than that.
21014 # (v3220: removed obsolete ":kn#10:",
21015 # I added <rmam>/<smam> based on the init string -- esr)
21016 v3220|LANPAR Vision II model 3220/3221/3222,
21017 OTbs, am, mir, xenl,
21018 cols#80, it#8, lines#24,
21019 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
21020 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
21021 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
21022 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
21023 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
21024 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
21025 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
21026 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21027 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
21028 ######## ICH/ICH1 VERSUS RMIR/SMIR
21030 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
21031 # are present; the symptom is doubled characters in an update using insert.
21032 # These applications are technically correct; in both 4.3BSD termcap and
21033 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
21034 # unless the terminal needs both. To my knowledge, no terminal still in this
21035 # file requires both other than the very obsolete dm2500.
21037 # For ncurses-based applications this is not a problem, as ncurses uses
21038 # one or the other as appropriate but never mixes the two. Therefore we
21039 # have not corrected entries like `linux' and `xterm' that specify both.
21040 # If you see doubled characters from these, use the linux-nic and xterm-nic
21041 # entries that suppress ich/ich1. And upgrade to ncurses!
21044 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
21046 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
21047 # ECMA-48 standards are said to be almost identical, but are not the same
21048 # as X3.64 (though for practical purposes they are close supersets of it).
21050 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
21051 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
21052 # Coded Character Sets"), include your snail-mail address, and you should
21053 # receive the document in due course. Don't expect an email acknowledgement.
21055 # Related standards include "X3.4-1977: American National Standard Code for
21056 # Information Interchange" (the ASCII standard) and "X3.41.1974:
21057 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
21058 # American National Standard for Information Interchange." I believe (but
21059 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
21063 #### VT100/ANSI/ECMA-48
21065 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
21066 # and ECMA-48 Control Functions for Coded Character Sets.
21068 # Much of the content of this comment is adapted from a table prepared by
21069 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
21070 # discussion of some terminfo-related issues, and updates to capture ECMA-48
21071 # have been added. Control functions described in ECMA-48 only are tagged
21072 # with * after their names.
21074 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
21075 # sequences. In the main table, \E stands for an escape (\033) character,
21076 # SPC for space. Pn stands for a single numeric parameter to be inserted
21077 # in decimal ASCII. Ps stands for a list of such parameters separated by
21078 # semicolons. Parameter meanings for most parametrized sequences are
21079 # decribed in the notes.
21081 # Sequence Sequence Parameter or
21082 # Mnemonic Name Sequence Value Mode terminfo
21083 # -----------------------------------------------------------------------------
21084 # APC Applicatn Program Command \E _ - Delim -
21085 # BEL Bell * ^G - - bel
21086 # BPH Break Permitted Here * \E B - * -
21087 # BS Backpace * ^H - EF -
21088 # CAN Cancel * ^X - - - (A)
21089 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
21090 # CCH Cancel Previous Character \E T - - -
21091 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
21092 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
21093 # CMD Coding Method Delimiter * \E
21094 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
21095 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
21096 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
21097 # CSI Control Sequence Intro \E [ - Intro -
21098 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
21099 # CUB Cursor Backward \E [ Pn D 1 eF cub
21100 # CUD Cursor Down \E [ Pn B 1 eF cud
21101 # CUF Cursor Forward \E [ Pn C 1 eF cuf
21102 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
21103 # CUU Cursor Up \E [ Pn A 1 eF cuu
21104 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
21105 # DA Device Attributes \E [ Pn c 0 - -
21106 # DAQ Define Area Qualification \E [ Ps o 0 - -
21107 # DCH Delete Character \E [ Pn P 1 eF dch
21108 # DCS Device Control String \E P - Delim -
21109 # DL Delete Line \E [ Pn M 1 eF dl
21110 # DLE Data Link Escape * ^P - - -
21111 # DMI Disable Manual Input \E \ - Fs -
21112 # DSR Device Status Report \E [ Ps n 0 - - (I)
21113 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
21114 # EA Erase in Area \E [ Ps O 0 eF - (J)
21115 # ECH Erase Character \E [ Pn X 1 eF ech
21116 # ED Erase in Display \E [ Ps J 0 eF ed (J)
21117 # EF Erase in Field \E [ Ps N 0 eF -
21118 # EL Erase in Line \E [ Ps K 0 eF el (J)
21119 # EM End of Medium * ^Y - - -
21120 # EMI Enable Manual Input \E b Fs -
21121 # ENQ Enquire ^E - - -
21122 # EOT End Of Transmission ^D - * -
21123 # EPA End of Protected Area \E W - - - (K)
21124 # ESA End of Selected Area \E G - - -
21125 # ESC Escape ^[ - - -
21126 # ETB End Transmission Block ^W - - -
21127 # ETX End of Text ^C - - -
21128 # FF Form Feed ^L - - -
21129 # FNK Function Key * \E [ Pn SPC W - - -
21130 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
21131 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
21132 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
21133 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
21134 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
21135 # HPB Char Position Backward \E [ j 1 FE -
21136 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
21137 # HT Horizontal Tab * ^I - FE - (N)
21138 # HTJ Horz Tab w/Justification \E I - FE -
21139 # HTS Horizontal Tab Set \E H - FE hts
21140 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
21141 # ICH Insert Character \E [ Pn @ 1 eF ich
21142 # IDCS ID Device Control String \E [ SPC O - * -
21143 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
21144 # IL Insert Line \E [ Pn L 1 eF il
21145 # IND Index \E D - FE -
21146 # INT Interrupt \E a - Fs -
21147 # JFY Justify \E [ Ps SPC F 0 FE -
21148 # IS1 Info Separator #1 * ^_ - * -
21149 # IS2 Info Separator #1 * ^^ - * -
21150 # IS3 Info Separator #1 * ^] - * -
21151 # IS4 Info Separator #1 * ^\ - * -
21152 # LF Line Feed ^J - - -
21153 # LS1R Locking Shift Right 1 * \E ~ - - -
21154 # LS2 Locking Shift 2 * \E n - - -
21155 # LS2R Locking Shift Right 2 * \E } - - -
21156 # LS3 Locking Shift 3 * \E o - - -
21157 # LS3R Locking Shift Right 3 * \E | - - -
21158 # MC Media Copy \E [ Ps i 0 - - (S)
21159 # MW Message Waiting \E U - - -
21160 # NAK Negative Acknowledge * ^U - * -
21161 # NBH No Break Here * \E C - - -
21162 # NEL Next Line \E E - FE nel (D)
21163 # NP Next Page \E [ Pn U 1 eF -
21164 # NUL Null * ^@ - - -
21165 # OSC Operating System Command \E ] - Delim -
21166 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
21167 # PFS Page Format Selection * \E Pn SPC J 0 - -
21168 # PLD Partial Line Down \E K - FE - (T)
21169 # PLU Partial Line Up \E L - FE - (U)
21170 # PM Privacy Message \E ^ - Delim -
21171 # PP Preceding Page \E [ Pn V 1 eF -
21172 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
21173 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
21174 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
21175 # PTX Parallel Texts * \E [ \ - - -
21176 # PU1 Private Use 1 \E Q - - -
21177 # PU2 Private Use 2 \E R - - -
21178 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
21179 # REP Repeat Char or Control \E [ Pn b 1 - rep
21180 # RI Reverse Index \E M - FE - (V)
21181 # RIS Reset to Initial State \E c - Fs -
21182 # RM Reset Mode * \E [ Ps l - - - (W)
21183 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
21184 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
21185 # SCI Single-Char Introducer \E Z - - -
21186 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
21187 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
21188 # SD Scroll Down \E [ Pn T 1 eF rin
21189 # SDS Start Directed String * \E [ Pn ] 1 - -
21190 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
21191 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
21192 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
21193 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
21194 # SI Shift In ^O - - - (P)
21195 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
21196 # SL Scroll Left \E [ Pn SPC @ 1 eF -
21197 # SLH Set Line Home * \E [ Pn SPC U - - -
21198 # SLL Set Line Limit * \E [ Pn SPC V - - -
21199 # SLS Set Line Spacing * \E [ Pn SPC h - - -
21200 # SM Select Mode \E [ Ps h none - - (W)
21201 # SO Shift Out ^N - - - (Q)
21202 # SOH Start Of Heading * ^A - - -
21203 # SOS Start of String * \E X - - -
21204 # SPA Start of Protected Area \E V - - - (Z)
21205 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
21206 # SPH Set Page Home * \E [ Ps SPC G - - -
21207 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
21208 # SPL Set Page Limit * \E [ Ps SPC j - - -
21209 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
21210 # SR Scroll Right \E [ Pn SPC A 1 eF -
21211 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
21212 # SRS Start Reversed String * \E [ Ps [ 0 - -
21213 # SSA Start of Selected Area \E F - - -
21214 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
21215 # SSW Set Space Width * \E [ Pn SPC [ none - -
21216 # SS2 Single Shift 2 (G2 set) \E N - Intro -
21217 # SS3 Single Shift 3 (G3 set) \E O - Intro -
21218 # ST String Terminator \E \ - Delim -
21219 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
21220 # STS Set Transmit State \E S - - -
21221 # STX Start pf Text * ^B - - -
21222 # SU Scroll Up \E [ Pn S 1 eF indn
21223 # SUB Substitute * ^Z - - -
21224 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
21225 # SYN Synchronous Idle * ^F - - -
21226 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
21227 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
21228 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
21229 # TBC Tab Clear \E [ Ps g 0 FE tbc
21230 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
21231 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
21232 # TSS Thin Space Specification \E [ Pn SC E none FE -
21233 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
21234 # VPB Line Position Backward * \E [ Pn k 1 FE -
21235 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
21236 # VT Vertical Tabulation * ^K - FE -
21237 # VTS Vertical Tabulation Set \E J - FE -
21239 # ---------------------------------------------------------------------------
21243 # Some control characters are listed in the ECMA-48 standard without
21244 # being assigned functions relevant to terminal control there (they
21245 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
21246 # here anyway for completeness.
21248 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
21250 # (B) There seems to be some confusion abroad between CHA and HPA. Most
21251 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
21252 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
21253 # preserved the CHA abbreviation.
21255 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
21256 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
21257 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
21258 # CHT abbreviation.
21260 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
21262 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
21265 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
21266 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
21267 # 5 = clear all char tabs, 6 = clear all line tabs.
21269 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
21270 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
21271 # Position Absolute" but retains the HVP abbreviation.
21273 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
21276 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
21277 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
21278 # DSR, 6 = request CPR response.
21280 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
21281 # 1 = clear from beginning, 2 = clear.
21283 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
21285 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
21287 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
21288 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
21289 # Position Relative" but retains the HPR abbreviation.
21291 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
21294 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
21295 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
21296 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
21297 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
21298 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
21299 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
21300 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
21301 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
21302 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
21303 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
21304 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
21305 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
21306 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
21307 # 61-65 = variable highlights for ideograms.
21309 # (P) SI is also called LSO, Locking Shift Zero.
21311 # (Q) SI is also called LS1, Locking Shift One.
21313 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
21314 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
21315 # Absolute' but retains the VPA abbreviation.
21317 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
21318 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
21319 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
21320 # start relay to primary aux device, 6 = stop relay to secondary aux device,
21321 # 7 = start relay to secondary aux device.
21323 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
21326 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
21329 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
21331 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
21332 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
21333 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
21334 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
21335 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
21336 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
21337 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
21338 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
21339 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
21340 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
21341 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
21342 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
21343 # from ECMA-48's 5th edition but are listed here for reference.
21345 # (X) Select Alternate Presentation Variants is used only for non-Latin
21348 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
21350 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
21353 # ---------------------------------------------------------------------------
21357 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
21358 # X3.64 Control Sequence Introducer is the two characters "Escape ["
21360 # Delim a Delimiter
21362 # x/y identifies a character by position in the ASCII table (column/row)
21364 # eF editor function (see explanation)
21366 # FE format effector (see explanation)
21368 # F is a Final character in
21369 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
21370 # a control sequence (F from 4/0 to 7/14)
21372 # Gs is a graphic character appearing in strings (Gs ranges from
21373 # 2/0 to 7/14) in the ASCII table
21375 # Ce is a control represented as a single bit combination in the C1 set
21376 # of controls in an 8-bit character set
21378 # C0 the familiar set of 7-bit ASCII control characters
21380 # C1 roughly, the set of control chars available only in 8-bit systems.
21381 # This is too complicated to explain fully here, so read Jim Fleming's
21382 # article in the February 1983 BYTE, especially pages 214 through 224.
21384 # Fe is a Final character of a 2-character Escape sequence that has an
21385 # equivalent representation in an 8-bit environment as a Ce-type
21386 # (Fe ranges from 4/0 to 5/15)
21388 # Fs is a Final character of a 2-character Escape sequence that is
21389 # standardized internationally with identical representation in 7-bit
21390 # and 8-bit environments and is independent of the currently
21391 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21393 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21396 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21399 # Pn is a numeric parameter in a control sequence, a string of zero or
21400 # more characters ranging from 3/0 to 3/9 in the ASCII table
21402 # Ps is a variable number of selective parameters in a control sequence
21403 # with each selective parameter separated from the other by the code
21404 # 3/11 (which usually represents a semicolon); Ps ranges from
21405 # 3/0 to 3/9 and includes 3/11
21407 # * Not relevant to terminal control, listed for completeness only.
21409 # Format Effectors versus Editor Functions
21411 # A format effector specifies how following output is to be displayed.
21412 # An editor function allows you to modify the display. Informally
21413 # format effectors may be destructive; format effectors should not be.
21415 # For instance, a format effector that moves the "active position" (the
21416 # cursor or equivalent) one space to the left would be useful when you want to
21417 # create an overstrike, a compound character made of two standard characters
21418 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21419 # format effector, so you can do this. But many systems use it in a
21420 # nonstandard fashion, as an editor function, deleting the character to the
21421 # left of the cursor and moving the cursor left. When Control-H is assumed to
21422 # be an editor function, you cannot predict whether its use will create an
21423 # overstrike unless you also know whether the output device is in an "insert
21424 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21425 # its effect can always be predicted. The familiar characters carriage
21426 # return, linefeed, formfeed, etc., are defined as format effectors.
21428 # NOTES ON THE DEC VT100 IMPLEMENTATION
21430 # Control sequences implemented in the VT100 are as follows:
21432 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21433 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21435 # plus several private DEC commands.
21437 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21439 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21440 # Erase from beginning of line to cursor Esc [ 1 K
21441 # Erase line containing cursor Esc [ 2 K
21442 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21443 # Erase from beginning of screen to cursor Esc [ 1 J
21444 # Erase entire screen Esc [ 2 J
21446 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21447 # Esc [ 2 J, but this is wrong; the default is 0.
21449 # The VT100 responds to receiving the DA (Device Attributes) control
21451 # Esc [ c (or Esc [ 0 c)
21453 # by transmitting the sequence
21457 # where Ps is a character that describes installed options.
21459 # The VT100's cursor location can be read with the DSR (Device Status
21464 # The VT100 reports by transmitting the CPR sequence
21468 # where Pl is the line number and Pc is the column number (in decimal).
21470 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21474 # Here is a description of the color and attribute controls supported in the
21475 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21476 # terminal emulators for Intel boxes obey these. They are a proper subset
21477 # of the ECMA-48 escapes.
21479 # 0 all attributes off
21480 # 1 foreground bright
21482 # 5 blink on/background bright (not reliable with brown)
21484 # 8 set blank (non-display)
21485 # 10 set primary font
21486 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21487 # 12 set second alternate font (on PCs, display IBM high-half chars)
21489 # Color attribute sets
21490 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21491 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21492 # Bright black becomes gray. Bright brown becomes yellow,
21493 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21495 # * If the 5 attribute is on and you set a background color (40-47) it is
21496 # supposed to enable bright background.
21498 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21499 # when you try to set a "bright brown" (yellow) background with attribute
21500 # 5 (you get a blinking yellow foreground instead). A few displays
21501 # (including the System V console) support an attribute 6 that undoes this
21502 # braindamage (this is required by iBCS2).
21504 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21505 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21508 #### Intel Binary Compatibility Standard
21510 # For comparison, here are the capabilities implied by the Intel Binary
21511 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21512 # These recommendations are optional. IBCS2 allows the leading escape to
21513 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21514 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21515 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21516 # terminfo entry are followed with the corresponding capability in parens:
21518 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21519 # CSI 2h lock keyboard
21520 # CSI 2i send screen as input
21521 # CSI 2l unlock keyboard
21522 # CSI 6m enable background color intensity
21523 # CSI <0-2>c reserved
21524 # CSI <0-59>m select graphic rendition
21525 # CSI <n>;<m>H (cup) cursor to line n and column m
21526 # CSI <n>;<m>f cursor to line n and column m
21527 # CSI <n>@ (ich) insert characters
21528 # CSI <n>A (cuu) cursor up n lines
21529 # CSI <n>B (cud) cursor down n lines
21530 # CSI <n>C (cuu) cursor right n characters
21531 # CSI <n>D (cud) cursor left n characters
21532 # CSI <n>E cursor down n lines and in first column
21533 # CSI <n>F cursor up n lines and in first column
21534 # CSI <n>G (hpa) position cursor at column n-1
21535 # CSI <n>J (ed) erase in display
21536 # CSI <n>K (el) erase in line
21537 # CSI <n>L (il) insert line(s)
21538 # CSI <n>P (dch) delete characters
21539 # CSI <n>S (indn) scroll up n lines
21540 # CSI <n>T (rin) scroll down n lines
21541 # CSI <n>X (ech) erase characters
21542 # CSI <n>Z (cbt) back up n tab stops
21543 # CSI <n>` cursor to column n on line
21544 # CSI <n>a (cuu) cursor right n characters
21545 # CSI <n>d (vpa) cursor to line n
21546 # CSI <n>e cursor down n lines and in first column
21547 # CSI <n>g (cbt) clear all tabs
21548 # CSI <n>z make virtual terminal n active
21549 # CSI ?7h (smam) turn automargin on
21550 # CSI ?7l (rmam) turn automargin off
21551 # CSI s save cursor position
21552 # CSI u restore cursor position to saved value
21553 # CSI =<c>A set overscan color
21554 # CSI =<c>F set normal foreground color
21555 # CSI =<c>G set normal background color
21556 # CSI =<c>H set reverse foreground color
21557 # CSI =<c>I set reverse foreground color
21558 # CSI =<c>J set graphic foreground color
21559 # CSI =<c>K set graphic foreground color
21560 # CSI =<n>g (dispc) display n from alternate graphics character set
21561 # CSI =<p>;<d>B set bell parameters
21562 # CSI =<s>;<e>C set cursor parameters
21563 # CSI =<x>D enable/disable intensity of background color
21564 # CSI =<x>E set/clear blink vs. bold background
21565 # CSI 7 (sc) (sc) save cursor position
21566 # CSI 8 (rc) (rc) restore cursor position to saved value
21567 # CSI H (hts) (hts) set tab stop
21568 # CSI Q<n><string> define function key string
21569 # (string must begin and end with delimiter char)
21570 # CSI c (clear) clear screen
21572 # The lack of any specification for attributes in SGR (among other things)
21573 # makes this a wretchedly weak standard. The table above is literally
21574 # everything iBSC2 has to say about terminal escape sequences; there is
21575 # no further discussion of their meaning or how to set the parameters
21576 # in these sequences at all.
21579 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21581 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21582 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21583 # with the extension names chosen for compatibility with the termcap names
21584 # assigned in System V terminfo. There are some variant extension sets out
21585 # there. We try to describe them here.
21587 #### XENIX extensions:
21589 # The XENIX extensions include a set of function-key capabilities as follows:
21591 # code XENIX variable name terminfo name name clashes?
21592 # ---- ------------------- ------------- -----------------------
21594 # CR key_char_right
21595 # CW key_change_window create_window
21597 # HM key_home khome
21599 # LD key_delete_line kdl1
21600 # LF key_linefeed label_off
21601 # NU key_next_unlocked_cell
21602 # PD key_page_down knp
21604 # PN start_print mc5
21606 # PS stop_print mc4
21607 # PU key_page_up kpp pulse
21608 # RC key_recalc remove_clock
21609 # RF key_toggle_ref req_for_input
21610 # RT key_return kent
21611 # UP key_up_arrow kcuu1 parm_up_cursor
21613 # WR key_word_right
21615 # The XENIX extensions also include the following character-set and highlight
21618 # XENIX terminfo function
21619 # ----- -------- ------------------------------
21620 # GS smacs start alternate character set
21621 # GE rmacs end alternate character set
21622 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21623 # bo blink begin blink (not used in /etc/termcap)
21624 # be end blink (not used in /etc/termcap)
21625 # bb blink glitch (not used in /etc/termcap)
21626 # it dim begin dim (not used in /etc/termcap)
21627 # ie end dim (not used in /etc/termcap)
21628 # ig dim glitch (not used in /etc/termcap)
21630 # Finally, XENIX also used the following forms-drawing capabilities:
21632 # single double type ASCII approximation
21633 # ------ ------ ------------- -------------------
21634 # GV Gv vertical line |
21635 # GH Gv horizontal line - _
21636 # G1 G5 top right corner _ |
21637 # G2 G6 top left corner |
21638 # G3 G7 bottom left corner |_
21639 # G4 G8 bottom right corner _|
21640 # GD Gd down-tick character T
21641 # GL Gl left-tick character -|
21642 # GR Gr right-tick character |-
21643 # GC Gc middle intersection -|-
21644 # GU Gu up-tick character _|_
21646 # These were invented to take advantage of the IBM PC ROM character set. One
21647 # can compose an acsc string from the single-width characters as follows
21648 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21649 # When translating a termcap file, ncurses tic will do this automatically.
21650 # The double forms characters don't fit the SVr4 terminfo model.
21652 #### AT&T Extensions:
21654 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21655 # nonstandard capabilities. Its signature is the KM capability, used to name
21656 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21657 # set. Comments in the original, and a little cross-checking with other AT&T
21658 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21659 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21660 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21661 # cursor invisible), and CV=:ve: (make cursor normal).
21665 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21666 # have the System V capabilities up to SVr1 level. After that, it supports
21667 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21668 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21669 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21670 # HP binary format incompatible with SVr4's.
21672 #### IBM Extensions
21674 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21675 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21676 # capabilities following prtr_non with the following special capabilties:
21677 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21678 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21679 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21680 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21681 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21682 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21683 # correspond to acsc chars, here is the mapping:
21685 # box1[0] = ACS_ULCORNER
21686 # box1[1] = ACS_HLINE
21687 # box1[2] = ACS_URCORNER
21688 # box1[3] = ACS_VLINE
21689 # box1[4] = ACS_LRCORNER
21690 # box1[5] = ACS_LLCORNER
21691 # box1[6] = ACS_TTEE
21692 # box1[7] = ACS_RTEE
21693 # box1[8] = ACS_BTEE
21694 # box1[9] = ACS_LTEE
21695 # box1[10] = ACS_PLUS
21697 # The box2 characters are the double-line versions of these forms graphics.
21698 # The AIX binary terminfo format is incompatible with SVr4's.
21700 #### Iris console extensions:
21702 # HS is half-intensity start; HE is half-intensity end
21703 # CT is color terminal type (for Curses & rogue)
21704 # CP is color change escape sequence
21705 # CZ are color names (for Curses & rogue)
21707 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21709 #### TC Extensions:
21711 # There is a set of extended termcaps associated with something
21712 # called the "Terminal Control" or TC package created by MainStream Systems,
21713 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21714 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21715 # that flags color terminals.
21717 ######## NCURSES USER-DEFINABLE CAPABILITIES
21719 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21720 # infocmp to manipulate user-definable capabilities. Those that are intended
21721 # for use in either terminfo or termcap use 2-character names. Extended
21722 # function keys do not use 2-character names, and are available only with
21725 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21726 # supports this extension; termcap libraries can as noted above make limited
21727 # use of the feature.
21729 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21732 #### SCREEN Extensions:
21734 # The screen program uses the termcap interface. It recognizes a few useful
21735 # nonstandard capabilities. Those are used in this file.
21737 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21739 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21740 # E0 (str) Switch charset 'G0' back to standard charset.
21741 # S0 (str) Switch charset 'G0' to the specified charset.
21742 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
21745 # AX is relatively straightforward; it is interpreted by ncurses to say that
21746 # SGR 39/49 reset the terminal's foreground and background colors to their
21749 # XT is harder, since screen's manpage does not give more details. For that,
21750 # we must read screen's source-code. When XT is set, screen assumes
21752 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
21753 # screen may also set the terminal's name, which is (for xterm) distinct
21754 # from the icon name.
21755 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
21756 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
21757 # this is an rxvt feature.
21758 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
21759 # These are from xterm, although xterm accepts mouse codes that may not be
21760 # recognized by screen, e.g., 1005, 1006.
21761 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
21762 # sequence. However, because screen uses only termcap, the values returned
21763 # by Af/Ab are not usable because they rely on expressions that termcap
21764 # does not support. Therefore, screen uses a hardcoded string to work
21765 # around the limitation.
21766 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
21768 # The other ISO-2022 features are rarely used, but provided here to make
21769 # screen's termcap features available.
21771 #### XTERM Extensions:
21773 # Most of the xterm extensions are for function-keys. Since patch #94 (in
21774 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
21775 # additional function-key strings. Some other developers copied the feature,
21776 # though they did not follow xterm's lead in patch #167 (in 2002), to make
21777 # these key definitions less ambiguous.
21779 # A few terminals provide similar functionality (sending distinct keys when
21780 # a modifier is used), including rxvt.
21782 # These are the extended keys defined in this file:
21784 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
21785 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
21786 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
21787 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
21789 # Here are the other xterm-related extensions which are used in this file:
21791 # Cr is a string capability which resets the cursor color
21792 # Cs is a string capability which sets the cursor color to a given value.
21793 # The single string parameter is the color name/number, according to the
21795 # Ms modifies the selection/clipboard. Its parameters are
21796 # p1 = the storage unit (clipboard, selection or cut buffer)
21797 # p2 = the base64-encoded clipboard content.
21798 # Se resets the cursor style to the terminal power-on default.
21799 # Ss is a string capability with one numeric parameter. It is used to set the
21800 # cursor style as described by the DECSCUSR function to a block or
21802 # TS is a string capability which acts like "tsl", but uses no parameter and
21803 # goes to the first column of the "status line".
21804 # XM is a string capability which overrides ncurses's built-in string which
21805 # enables xterm mouse mode.
21807 #### Miscellaneous extensions:
21809 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
21810 # This was implemented for the Hurd.
21811 # E3 clears the terminal's scrollback buffer. This was implemented in the
21812 # Linux 3.0 kernel as a security feature. It matches a feature which was
21813 # added in xterm patch #107.
21814 # U8 is a numeric capability which denotes a terminal emulator which does not
21815 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
21816 # value to enable it.
21818 ######## CHANGE HISTORY
21820 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21821 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21822 # maintained by Eric S. Raymond as part of the ncurses project.
21824 # This file contains all the capability information present in John Kunze's
21825 # last version of the termcap master file, except as noted in the change
21826 # comments at end of file. Some information about very ancient obsolete
21827 # capabilities has been moved to comments. Some all-numeric names of older
21828 # terminals have been retired.
21830 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21831 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21832 # used by BSD curses.
21834 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21835 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21836 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21837 # making perfectly synchronized mistakes which I then failed to catch by
21838 # eyeball, the translation was correct and perfectly information-preserving.
21840 # Major version number bumps correspond to major version changes in ncurses.
21842 # Here is a log of the changes since then:
21844 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21845 # * First terminfo master translated from 8.3.
21846 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21847 # * Replaced Wyse entries with updated entries supplied by vendor.
21849 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21850 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21851 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21852 # * Better XENIX keycap translation. Describe TC termcaps.
21853 # * Contact and history info supplied by Qume.
21854 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21855 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21856 # * Added information on X3.64 and VT100 standard escape sequences.
21857 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21858 # * Added a correct X11R6 xterm entry.
21859 # * Fixed terminfo translations of padding.
21860 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21861 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21862 # * Added u6/u7/u8/u9 capabilities.
21863 # * Added PCVT entry.
21864 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21865 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21866 # to use reverse-video standout so Emacs will look right.
21867 # * Added el1 capability to ansi.
21868 # * Added smacs/rmacs to ansi.sys.
21870 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21871 # * New mt70 entry.
21872 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21873 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21874 # smartvid & smarterm, ampex 175 & 219 & 232,
21875 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21876 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21877 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21878 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21879 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21880 # * Restored the old minimal-ansi entry, luna needs it.
21881 # * Fixed some incorrect ip and proportional-padding translations.
21882 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21883 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21884 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21885 # to force a particular height.
21886 # * Added beehive4 and reorganized other Harris entries.
21887 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21888 # * Merged in DEC's official entries for its terminals. The only old
21889 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21890 # * Replaced the translated BBN Bitgraph entries with purpose-built
21891 # ones from AT&T's SVr3.
21892 # * Replaced the AT&T entries with AT&T's official terminfos.
21893 # * Added teleray 16, vc415, cops10.
21894 # * Merged in many individual capabilities from SCO terminfo files.
21895 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21897 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21898 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21899 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21900 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21901 # simterm, citoh and variants.
21902 # * Replaced sol entry with sol1 and sol2.
21903 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21904 # terminfo entries.
21905 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21906 # and dg200 entries using caps from from SCO.
21907 # * Added the usual set of function-key mappings to ANSI entry.
21908 # * Corrected xterm's function-key capabilities.
21909 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21910 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21911 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21912 # * Fix in xterm entry, get the arrow keys right.
21913 # * Change some \0 escapes to \200.
21914 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21915 # * Added apple (Videx card), adm1a, oadm31.
21916 # * Fixed malformed ampex csr.
21917 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21918 # * Changed mandatory to advisory padding in many entries.
21919 # * Replaced HP entries up to hpsub with purpose-built ones.
21920 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21921 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21922 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21923 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21924 # more efficient (but the entries otherwise identical).
21925 # * Added dg211 from Shuford archive.
21926 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21927 # adm42-nl, pc52, gs6300, xerox820, uts30.
21928 # * Pull SCO's padding into vi200 entry.
21929 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21930 # entries merged in from SCO's descriptions.
21931 # * Fixed old-style prefix padding on zen50, h1500.
21932 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21933 # entry from SCO's description.
21934 # * Reorganized the special entries.
21935 # * Added lm#0 to cbunix and virtual entries.
21937 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21938 # * Restored cdc456tst.
21939 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21940 # * Added megatek, beacon, microkit.
21941 # * Freeze for ncurses-1.9 release.
21942 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21943 # * Added historical data for TAB.
21944 # * Comment fixes from David MacKenzie.
21945 # * Added the new BSDI pc3 entry.
21946 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21947 # * A change in the tic -C logic now ensures that all entries in
21948 # the termcap translation will fit in < 1024 bytes.
21949 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21950 # from GNU termcap file. This merges in all their local information.
21951 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21952 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21953 # * Added warnings about entries with long translations (restoring
21954 # all the GNU termcaps pushes a few over the edge).
21955 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21956 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21957 # number of long (> 1024) termcap translations back to 0.
21959 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21960 # * Added kf13-kf20 to Linux entry.
21961 # * Regularize Prime terminal names.
21962 # * Historical data on Synertek.
21963 # * Freeze for ncurses-1.9.1.
21964 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21965 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21966 # * Eliminate whitespace in short name fields, this tanks some scripts.
21967 # * Name field changes to shorten some long entries.
21968 # * Termcap translation now automatically generates empty rmir/smir
21969 # when ich1/ich is present (copes with an ancient vi bug).
21970 # * Added `screen' entries from FSF's screen-3.6.2.
21971 # * Added linux-nic and xterm-nic entries.
21972 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21973 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21974 # eliminating some special-case code in ncurses.
21976 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21977 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21978 # that captures everything unique from it.
21979 # * Added reorder script generator.
21980 # * Freeze for ncurses 1.9.2 release.
21981 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21982 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21983 # * Added Olaf Siebert's corrections for adm12.
21984 # * ansi-pc-color now includes the colors and pairs caps, so that
21985 # entries which use it will inherit them automatically.
21986 # * The linux entry can now recognize the center (keypad 5) key.
21987 # * Removed some junk that found its way into Linux acsc.
21989 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21990 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21991 # * xterm doesn't try to use application keypad mode any more.
21992 # * Freeze for ncurses-1.9.3 release.
21993 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21994 # * Added corrected sun entry from vendor.
21995 # * Added csr capability to linux entry.
21996 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21997 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21998 # * Some commented-out caps in long entries come back in, my code
21999 # for computing string-table lengths had a bug in it.
22000 # * pcansi series modified to fit comm-program reality better.
22001 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
22002 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
22003 # * Correct some bad aliases in the pcansi series
22004 # * Added entry for QNX console.
22005 # * Clean up duplicate long names for use with 4.4 library.
22006 # * Change vt100 standout to be normal reverse vide, not bright reverse;
22007 # this makes the Emacs status line look better.
22008 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
22009 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
22010 # * Minor surgery, mostly on name strings, to shorten termcap version.
22012 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
22013 # * Added dec-vt100 for use with the EWAN emulator.
22014 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
22015 # * Freeze for 1.9.5 alpha release.
22016 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
22017 # * Changed xterm lines to 24, the X11R6 default.
22018 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
22019 # * Added 7 newly discovered, undocumented acsc characters to linux
22020 # entry (the pryz{|} characters).
22021 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
22022 # * Correct two typos in the xterm entries introduced in 9.9.1.
22023 # * I finally figured out how to translate ko capabilities. Done.
22024 # * Added tvi921 entries from Tim Theisen.
22025 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
22026 # * Removed mystery tec entry, it was neither interesting nor useful.
22027 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
22028 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
22029 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
22030 # by making them relative to use capabilities
22031 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
22032 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
22033 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
22035 # * Translate all home=\E[;H capabilities to home=\E[H, they're
22037 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
22038 # vt100 and ANSI-like terminals.
22039 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
22040 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
22041 # does this now, too.
22042 # * fviewpoint is gone, it duplicated screwpoint.
22043 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
22044 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
22045 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
22046 # The UW vi50 replaces the old one, which becomes vi50adm,
22047 # * No more embedded commas in name fields.
22049 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
22050 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
22051 # * Introduced klone+* entries for describing Intel-console behavior.
22052 # * Linux kbs is default-mapped to delete for some brain-dead reason.
22053 # * -nsl -> -ns. The -pp syntax is obsolete.
22054 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
22055 # * Make xterm entry do application-keypad mode again. I got complaints
22056 # that it was messing up someone's 3270 emulator.
22057 # * Added some longname fields in order to avoid warning messages from
22058 # older tic implementations.
22059 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
22060 # it! (This gives us pi, greater than, less than, and a few more.)
22061 # * Freeze for ncurses-1.9.6 release.
22062 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
22063 # * Add xon to a number of console entries, they're memory-mapped and
22064 # don't need padding.
22065 # * Correct the use dependencies in the ansi series.
22066 # * Hand-translate more XENIX capabilities.
22067 # * Added hpterm entry for HP's X terminal emulator.
22068 # * Added aixterm entries.
22069 # * Shortened four names so everything fits in 14 chars.
22071 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
22072 # * Added ibcs2 entry and info on iBCS2 standard.
22073 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
22074 # * We can handle the HP meml/memu capability now.
22075 # * Added smacs to klone entries, just as documentation.
22076 # * Carrected ansi.sys and cit-500 entries.
22077 # * Added z39, vt320-k311, v220c, and avatar entries.
22078 # * Make pcansi use the ansi.sys invis capability.
22079 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
22080 # tvi925, tvi950, dt80, ncr7900i, h19.
22081 # * X3.64 has been withdrawn, change some references.
22082 # * Removed function keys from ansi-m entry.
22083 # * Corrected ansi.sys entry.
22084 # * Freeze for ncurses-1.9.7 release.
22085 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
22086 # * Added rmam/smam capabilities to many entries based on init strings.
22087 # * Added correct hpa/vpa to linux.
22088 # * Reduced several entries relative to vt52.
22089 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
22090 # * Exiled some utterly unidentifiable custom and homebrew types to the
22091 # UFO file; also, obsolete small-screen hardware; also, entries which
22092 # look flat-out incorrect, garbled, or redundant. These include the
22093 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
22094 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
22095 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
22096 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
22097 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
22098 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
22099 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
22100 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
22101 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
22102 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
22103 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
22104 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
22105 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
22106 # * Corrected pcvt25h as suggested by Brian C. Grayson
22107 # <bgrayson@pine.ece.utexas.edu>.
22108 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
22109 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
22110 # * Added kent=\EOM to xterm entry.
22112 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
22113 # * Corrected gigi entry.
22114 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
22115 # bad hpa/vpa capabilities.
22116 # * Corrected flash strings to have a uniform delay of .2 sec. No
22117 # more speed-dependent NUL-padding!
22118 # * terminfo capabilities in comments bracketed with <>.
22119 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
22120 # * Replaced pcvt with the 3.31 pcvt entries.
22121 # * Freeze for 1.9.7a.
22122 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
22123 # * Added emu entry from the X11R6 contrib tape sources.
22125 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
22126 # * Improved iris-ansi and sun entries.
22127 # * More flash string improvements.
22128 # * Corrected wy160 & wy160 as suggested by Robert Dunn
22129 # * Added dim to at386.
22130 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
22131 # he's ready to start using the termcap generated from this one.
22132 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
22133 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
22134 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
22135 # att610, att620, att630,
22136 # * Changed hazeltine name prefix from h to hz.
22137 # * Sent t500 to the UFI file.
22138 # * I think we've sucked all the juice out of BSDI's termcap file now.
22139 # * Freeze for ncurses 1.9.8 release
22140 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
22141 # * Unfreeze, linux kbs needed to be fixed.
22142 # * Tim Theisen pinned down a bug in the DMD firmware.
22143 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
22144 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
22145 # (The broken ones had been shadowed by sgr.)
22146 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
22147 # * Added documentation on ECMA-48 standard.
22148 # * New Amiga entry.
22149 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
22150 # * More ECMA-48 stuff
22151 # * Corrected typo in minix entry, added pc-minix.
22152 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
22153 # * Added rxvt entry.
22154 # * Added 1.3.x color-change capabilities to linux entry.
22155 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
22156 # * Corrected rxvt entry khome/kend.
22157 # * Corrected linux color change capabilities.
22158 # * NeXT entries from Dave Wetzel.
22159 # * Cleaned up if and rf file names (all in /usr/share now).
22160 # * Changed linux op capability to avoid screwing up a background color
22161 # pair set by setterm.
22162 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
22163 # * Added xterm-sun.
22164 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
22167 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
22168 # * Another sweep through the Shuford archive looking for new info.
22169 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
22170 # * Added st52 from Per Persson.
22171 # * Added eterm from the GNU Emacs 19.30 distribution.
22172 # * Freeze for 1.9.9.
22173 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
22174 # * FreeBSD console entries from Andrew Chernov.
22175 # * Removed duplicate Atari st52 name.
22176 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
22177 # * xterm doesn't actually have ACS_BLOCK.
22178 # * Change klone+color setf/setb to simpler forms that can be
22179 # translated into termcap.
22181 # * Removed mechanically-generated junk capabilities from cons* entries.
22182 # * Added color support to bsdos.
22183 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
22184 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
22185 # * Created ecma+color, linux can use it. Also added ech to linux.
22186 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
22187 # * Add descriptions to FreeBSD console entries. Also shorten
22188 # some aliases to <= 14 chars for portability.
22189 # * Added x68k console
22190 # * Added OTbs to several VT-series entries.
22191 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
22192 # * screen entry update for 3.7.1 from Michael Alan Dorman.
22193 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
22194 # * kterm correction due to Kenji Rikitake.
22195 # * ACS correction in vt320-kll due to Phillippe De Muyter.
22196 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
22197 # * Sun console entry correction from J.T. Conklin.
22198 # * Changed all DEC VT300 and up terminals to use VT300 tab set
22199 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
22200 # * Added smul to linux entry (we never noticed it was missing
22201 # because of sgr!).
22202 # * Added rmln to hp+labels (deduced from other HP entries).
22203 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
22204 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
22205 # * Corrected vt220 acsc.
22206 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
22207 # this corresponds to reality and helps prevent some tic warnings.
22208 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
22209 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
22210 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
22211 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
22212 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
22213 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
22214 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
22215 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
22216 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
22217 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
22218 # ifmr, v3220, wy100q, tandem653, ibmaed.
22219 # * Added DWK terminal description.
22220 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
22221 # * Many entries now have highlights inherited from adm+sgr.
22222 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
22223 # * xtitle and xtitle-twm enable access to the X status line.
22224 # * Added linux-1.3.6 color palette caps in conventional format.
22225 # * Added adm1178 terminal.
22226 # * Move fos and apollo terminals to obsolete category.
22227 # * Aha! The BRL terminals file told us what the Iris extensions mean.
22228 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
22229 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
22231 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
22232 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
22233 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
22234 # * Corrected, from BRL termcap file: vi50.
22235 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
22236 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
22237 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
22238 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
22239 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
22240 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
22241 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
22242 # * Paired-attribute fixes to various terminals.
22243 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
22244 # * xterm entry corrections from Thomas Dickey.
22245 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
22246 # * Added t916 entry, translated from a termcap in SCO's support area.
22247 # * New qnx entry from Michael Hunter.
22248 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
22249 # * Added hpex2 from Ville Sulko.
22250 # * Fixed a bug that ran the qnx and pcvtXX together.
22251 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
22252 # * Added dtterm entry from Solaris CDE.
22253 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
22254 # * corrected pairs#8 typo in dtterm entry.
22256 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
22257 # * updated xterm entry to cover 3.1.2E's new features.
22258 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
22259 # * Added new minix entry
22260 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
22261 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
22262 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
22263 # * Added Prism entries and kt7ix.
22264 # * Caution notes about EWAN and tabset files.
22265 # * Changed /usr/lib/tabset -> /usr/share/tabset.
22266 # * Added acsc/rmacs/smacs to vt52.
22267 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
22268 # * Merged in Thomas Dickey's reorganization of the xterm entries;
22269 # added technical corrections to avoid warning messages.
22270 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
22271 # * Added rmso=\E[27m in Linux entry.
22272 # * Added koi8-r support for Linux console.
22273 # * Replace xterm entries with canonical ones from XFree86 3.2.
22274 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
22275 # * Added color_xterm from Jacob Mandelson
22276 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
22277 # * Back off the xterm entry to use r6 as a base.
22278 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
22279 # * Added dec-vt220 at Adrian Garside's request.
22281 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
22283 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
22284 # * Minor corrections to xterm entries.
22285 # * Replaced EWAN telnet entry.
22286 # * Dropped the reorder script generator. It was a fossil.
22287 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22288 # * Replaced minitel-2 entry.
22289 # * Added MGR, ansi-nt.
22290 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22291 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22292 # the 4.4BSD Lite2 file.
22294 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
22295 # * Use setaf/setab consistently with SVr4.
22296 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
22297 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
22298 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
22299 # * add xterm-16color, for XFree86 3.3
22300 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
22301 # * correct typo in emu
22302 # * correct typo in vt102-w (Robert Wuest)
22303 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
22304 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
22305 # * remove ech capability from rxvt (it does the wrong thing)
22306 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
22307 # * remove spurious newlines from several entries (hp+color, wy50,
22308 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
22310 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
22311 # * correct rmso capability of wy50-mc
22312 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
22313 # * add cbt to xterm-xf86-v32
22314 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
22315 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
22316 # other capabilities not in xterm-r6.
22317 # * remove alternate character set from kterm entry.
22318 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
22319 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
22320 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
22321 # * add xterm-8bit entry.
22322 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
22323 # * repair several places where early version of tic replaced \, with \\\,
22324 # * make acsc entries canonical form (sorted, uniq).
22325 # * modify acsc entries for linux, linux-koi8
22326 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
22327 # * add color, mouse support to kterm.
22328 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
22329 # * correct wy120 smxon/tbc capabilities which were stuck together.
22330 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
22331 # * add entry for xterm-xf86-v39t
22332 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
22333 # * add u8,u9 to sun-il description
22334 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
22335 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
22337 # * add hds200 description (Walter Skorski)
22338 # * add EMX 0.9b descriptions
22339 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
22340 # * rename xhpterm back to hpterm.
22341 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
22342 # * change initc in linux-c-nc to use 0..1000 range.
22343 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
22344 # * remove hpa/vpa from rxvt, which implements them incorrectly.
22345 # * add sgr0 for rxvt.
22346 # * remove bogus smacs/rmacs from EMX descriptions.
22347 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
22348 # * revised entry for att7300
22349 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
22350 # * use \0 rather than \200.
22351 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
22352 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
22353 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
22354 # * rename xterm-xf86-v39t to xterm-xf86-v40
22355 # * remove bold/underline from sun console entries since they're not
22357 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
22358 # * add beterm entry (Fred Fish)
22359 # * add irix-color/xwsh entry.
22360 # * turn ncv off for linux.
22361 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
22362 # * set ncv for FreeBSD console (treat colors with reverse specially).
22363 # * remove sgr string from qnx based on report by Xiaodan Tang
22364 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
22365 # * remove spurious commas from descriptions
22366 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
22367 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
22368 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22369 # apparently based on cp-866).
22371 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
22373 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22374 # * Replaced minitel-2 entry.
22375 # * Added MGR, ansi-nt.
22376 # * Minor corrections to xterm entries.
22377 # * Replaced EWAN telnet entry.
22378 # * Dropped the reorder script generator. It was a fossil.
22379 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22380 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22381 # the 4.4BSD Lite2 file.
22382 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
22383 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
22384 # * Updated iris-ansi; corrected vt102-w.
22385 # * Switch base xterm entry to 3.3 level.
22386 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
22388 # * Removed rmir/smir from tv92B.
22390 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
22391 # * add hds200 description (Walter Skorski)
22392 # * add beterm entry (Fred Fish)
22393 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
22394 # iris-color entries.
22395 # * add emx entries.
22396 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22397 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22399 # * remove sgr string from qnx based on report by Xiaodan Tang
22400 # * Added u8/u9, removed rmul/smul from sun-il.
22401 # * 4.2 tic displays \0 rather than \200.
22402 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22403 # apparently based on cp-866).
22404 # * Merged in Pavel Roskin's acsc for linux-koi8
22405 # * Corrected some erroneous \\'s to \.
22406 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22407 # * II -> ii in pcvtXX, screen, xterm.
22408 # * Removed \n chars following ANSI escapes in sgr & friends.
22409 # * Updated Wyse entries.
22410 # * h19 corrections from Tim Pierce.
22411 # * Noted that the dm2500 has both ich and smir.
22412 # * added pccons for the Alpha under OSF/1.
22413 # * Added Sony NEWS workstation entries and cit101e-rv.
22414 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22415 # the Verkuil entry messes up with Amiga Telnet.
22416 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22417 # * Corrected attributions in 10.2.0 release notes.
22418 # * Scanned the Shuford archive for new terminfos and information.
22419 # * Removed sgr from qnx entry (Thomas Dickey).
22420 # * Added entries for ICL and Kokusai Data Systems terminals.
22421 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22422 # * Incorporated att700 from the Boundless Technology FTP site.
22423 # * Miscellaneous contact-address and Web-page updates.
22425 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22428 # * add nxterm and xterm-color terminfo description (request by Cristian
22429 # Gafton <gafton@redhat.com>).
22430 # * modify rxvt terminfo description to clear alternate screen before
22431 # switching back to normal screen, for compatibility with applications
22432 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22433 # * modify linux terminfo description to reset color palette (reported
22434 # by Telford Tendys <telford@eng.uts.edu.au>).
22437 # * merge changes from current XFree86 xterm terminfo descriptions.
22440 # * Added minitel1 entries from Alexander Montaron.
22441 # * Added qnxt2 from Federico Bianchi.
22442 # * Added arm100 terminfo entries from Dave Millen.
22445 # * Added ncsa telnet entries from Francesco Potorti
22448 # * modify ncsa telnet entry to reflect color, other capabilities based on
22449 # examination of the source code - T.Dickey.
22452 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22455 # * Added Francesco Potorti's tuned Wyse 99 entries.
22456 # * dtterm enacs correction from Alexander V. Lukyanov.
22457 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22458 # * correct a typo in icl6404 entry.
22459 # * add xtermm and xtermc
22462 # * format most %'char' sequences to %{number}
22463 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22464 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22467 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22468 # * correct initialization string in xterm-r5, add misc other features
22469 # to correspond with xterm patch 84 - TD
22472 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22473 # * add Mathew Vernon's mach console entries
22474 # * corrections for ncsa function-keys (report by Larry Virden)
22477 # * change linux to use ncv#2, since underline does not work with color - TD
22480 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22481 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22482 # application modes, change kent to use the correct keypad code - TD
22485 # * add entry for Tera Term - TD
22488 # * minor improvements for teraterm entry - TD
22489 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22490 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22493 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22494 # xterm and ncsa entries by removing the unneeded ones. Note that
22495 # some entries will return kend & khome versus kslt and kfnd, for
22496 # PC-style keyboards versus strict vt220 compatiblity - TD
22499 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22501 # * add 'crt' entry - TD
22502 # * correct typos in 'linux-c' entry - TD
22505 # * update entries for BSD/OS console to use klone+sgr and klone+color
22506 # (Jeffrey C Honig)
22509 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22512 # * add linux-lat, from RedHat patches to ncurses 4.2
22515 # * add complete set of default function-key definitions for scoansi - TD.
22518 # * add cnorm, cvvis for Linux 2.2 kernels
22521 # * add kmous to xterm-r5 -TD
22522 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22523 # parent "use" clause -TD
22526 # * corrected cnorm, added el1 in 'screen' description -TD
22529 # * add ms-vt100 -TD
22532 # * corrections to beterm entry -TD
22535 # * add cygwin entry -TD
22538 # * minor corrections for beterm entry -TD
22541 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22544 # * add amiga-8bit entry
22545 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22546 # rcons-color, based on
22547 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22548 # * add alias for iris-ansi-net
22551 # * corrected scoansi entry's acsc, some function keys, add color -TD
22554 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22555 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22556 # key mapping, leaving Potorti's entries more like he named them -TD
22557 # * remove enter/exit am-mode from cygwin -TD
22560 # * correct typos in several entries (missing '[' from CSI):
22561 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22562 # strings for avt-ns -TD
22563 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22566 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22567 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22568 # * add xterm-88color and xterm-256color -TD
22571 # * add "obsolete" termcap strings -TD
22572 # * add kvt and gnome entries -TD
22575 # * correct cup string for regent100 -TD
22578 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22579 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22580 # * change OTrs capabilities to rs2 -TD
22581 # * add obsolete and extended capabilities to 'screen' -TD
22584 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22586 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22587 # and adding kcbt -TD
22590 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22591 # nonstandard resource settings -TD
22594 # * minor fixes for xterm-*, based on Debian #58530 -TD
22597 # * add several terminal types from esr's "11.0", as well as comments.
22598 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22599 # vt220-8bit, vt220-old, wy85-8bit
22602 # * add several terminal types from esr's "11.0.1" (ansi-*).
22603 # * update OTxx capabilities for changes on 2000/3/4.
22604 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22607 # * move screen's AX extension to ecma+color, modify several entries to
22608 # use that, adjusting ncv as needed -TD
22611 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22612 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22613 # in esr's version.
22616 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22617 # * correct color definition for ibm3164, make minor changes to other
22618 # IBM terminal definitions based on recent terminfo descriptions -TD
22621 # * add mgterm, from NetBSD -TD
22622 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22623 # * change cons25w to use rs2 for reset rather than rs1 -TD
22624 # * add rc/sc to aixterm based on manpage -TD
22627 # * remove ncv from xterm-16color, xterm-256color
22630 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22633 # * add Eterm (Michael Jennings)
22636 # * add amiga-vnc entry.
22639 # * correct description of Top Gun Telnet.
22640 # * add kterm-color
22643 # * add qansi* entries from QNX ftp site.
22646 # * add Matrix Orbital entries by Eric Z. Ayers).
22647 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22651 # * add S0, E0 extensions to screen's entry -TD
22654 # * several corrections based on tic's new parameter-checking code -TD
22655 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22656 # bracketing sequences that reset video attributes (\E8 would restore
22660 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22663 # * improved scoansi, based on SCO man-page, and testing console,
22664 # scoterm with tack -TD
22667 # * modify kterm to use acsc via SCS controls.
22670 # * screen 3.9.8 allows xterm mouse controls to pass-through
22673 # * remove spurious "%|" from some xterm entries.
22676 # * modify 'screen' khome/kend to match screen 3.09.08
22677 # * add examples of 'screen' customization (screen.xterm-xfree86,
22678 # screen.xterm-r6, screen.teraterm) -TD
22681 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22682 # * add "Apple_Terminal" entries -Benjamin Sittler
22683 # * remove time-delays from "Apple_Terminal" entries -TD
22684 # * make sgr entries time-delays consistent with individual caps -TD
22687 # * corrected/updated screen.xterm-xfree86
22690 # * ELKS descriptions, from Federico Bianchi
22691 # * add u6 (CSR) to Eterm (Michael Jennings).
22694 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22695 # tic which handles names no longer than 14 characters. Add
22696 # corresponding descriptions for the Darwin PowerPC console named
22697 # "xnuppc" -Benjamin Sittler
22700 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22703 # * add "putty" entry -TD
22704 # * updated "Apple_Terminal" entries -Benjamin Sittler
22707 # * add ms-vt100-color entry -TD
22708 # * add "konsole" entries -TD
22711 # * update gnome entry to Redhat 7.2 -TD
22714 # * add kf13-kf48 strings to cons25w -TD
22715 # * add pcvt25-color entry -TD
22716 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22717 # * improve some features of scoansi entry based on SCO's version -TD
22718 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22721 # * add kcbt to screen entry -TD
22724 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22727 # * split out linux-basic entry, making linux-c inherit from that, and
22728 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22729 # the history of this console type -TD
22730 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22731 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22734 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22737 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22738 # in the latter -TD
22741 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22742 # * ncr260wy350pp has only 16 color pairs -TD
22743 # * add sun-type4 from NetBSD -TD
22744 # * update xterm-xfree86 to current (patch 170) -TD
22745 # * add screen-bce, screen-s entries -TD
22746 # * add xterm-1002, xterm-1003 entries -TD
22749 # * update homepage for Top Gun Telnet/SSH
22752 # * reduce duplication in emx entries, added emx-base -TD
22755 # * corrected acs for screen.teraterm -TD
22756 # * add tkterm entry -TD
22759 # * cygwin changes from Charles Wilson:
22760 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22761 # primary instead of nxterm, to match XFree86's xterm.terminfo
22762 # usage and to prevent circular links.
22763 # (rxvt): add additional codes from rxvt.org.
22764 # (rxvt-color): new alias
22765 # (rxvt-xpm): new alias
22766 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22767 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22768 # with a "native" MSWin GUI. Each takes different acsc codes,
22769 # which are both different from the "normal" rxvt's acsc.
22770 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22771 # (cygwinDBG): ditto.
22774 # * update gnome terminal entries -TD
22777 # * add entries for djgpp 2.03 and 2.04 -TD
22780 # * add alias for vtnt -TD
22781 # * update xterm-xfree86 for XFree86 4.4 -TD
22784 # * add linux-vt (Andrey V Lukyanov)
22787 # * add screen.linux -TD
22790 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22793 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22794 # * add vt100+ and vt-utf8 entries -TD
22795 # * add uwin entry -TD
22798 # * add sgr strings to several common entries lacking them, e.g.,
22799 # screen, to make the entries more portable -TD
22800 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22801 # * similar fixups for cvvis/cnorm various entries -TD
22804 # * remove 'ncv' from xterm-256color (patch 188) -TD
22808 # * add xterm-xf86-v44 -TD
22809 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22810 # on G1 being used via an ISO-2022 escape sequence (report by
22811 # Juliusz Chroboczek) -TD
22812 # * add 'hurd' entry -TD
22815 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22817 # * align with xterm #192's use of xterm-new -TD
22818 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22819 # * make xterm-new the default "xterm" -TD
22822 # * minor fixes for emu -TD
22824 # * add rmam/smam to linux (Trevor Van Bremen)
22825 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22826 # * fixes for avatar0 -TD
22827 # * fixes for vp3a+ -TD
22830 # * add xterm-pc-fkeys -TD
22831 # * review/update gnome and gnome-rh90 entries (prompted by
22832 # Redhat Bugzilla #122815) -TD
22833 # * review/update konsole entries -TD
22834 # * add sgr, correct sgr0 for kterm and mlterm -TD
22835 # * correct tsl string in kterm -TD
22838 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22839 # * add sgr, rc/sc and ech to syscons entries -TD
22840 # * add function-keys to decansi -TD
22841 # * add sgr to mterm-ansi -TD
22842 # * add sgr, civis, cnorm to emu -TD
22843 # * correct/simplify cup in addrinfo -TD
22844 # * corrections for gnome and konsole entries
22845 # (Redhat Bugzilla #122815) -Hans de Goede
22846 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22847 # ISO-2022 strings for rmacs/smacs -TD
22850 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22853 # * improved putty entry -Robert de Bath
22856 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22857 # with the common usage of bce/ech -TD
22858 # * remove khome from vt220 (vt220's have no home key) -TD
22859 # * add rxvt+pcfkeys -TD
22862 # * modify several entries to ensure xterm mouse and cursor visibility
22863 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22864 # Eterm, screen. (The xterm entries are left alone - old ones for
22865 # compatibility, and the new ones do not require this change) -TD
22868 # * add morphos entry -Pavel Fedin
22869 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22870 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22873 # * update wsvt25 entry -TD
22876 # * update pairs for xterm-88color and xterm-256color to reflect the
22877 # ncurses extended-color support -TD
22880 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22881 # * add aixterm-16color to demonstrate 16-color capability -TD
22884 # * add media-copy to vt100 -TD
22885 # * corrected acsc string for vt52 -TD
22888 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22890 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22893 # * re-corrected acsc string for vt52 -TD
22896 # * corrected sun-il sgr string which referred to bold and underline -TD
22897 # * add sun-color entry -TD
22900 # * modify sgr0 in several entries to reset alternate-charset as in the
22902 # * modify sgr string of prism9 to better match the individual
22906 # * correct order of use= in rxvt-basic -TD
22909 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22912 # * other minor fixes to cygwin based on tack -TD
22913 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22916 # * add nsterm-16color entry -TD
22917 # * remove ncv flag from xterm-16color -TD
22918 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22919 # * update mlterm entry to 2.9.2 -TD
22922 # * fixes to make nsterm-16color match report
22923 # by Christian Ebert -Alain Bench
22926 # * add xterm+256color building block -TD
22927 # * add gnome-256color, putty-256color, rxvt-256color -TD
22930 # * add hpterm-color -TD
22933 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22934 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22935 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22936 # * improve xterm-256color by combining the ibm+16color setaf/setab
22937 # strings with SGR 48. The setf/setb strings also are cancelled here
22938 # rather than omitted so derived entries will cancel those also -Alain
22942 # * add some notes regarding copyright to terminfo.src -TD
22943 # * use rxvt+pcfkeys in Eterm -TD
22944 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22945 # as one would expect (km sends ESC rather than setting the 8th bit
22947 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22948 # * add konsole-solaris -TD
22951 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22952 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22953 # * modify xterm-24 to inherit from "xterm" -TD
22954 # * add xiterm entry -TD
22955 # * add putty-vt100 entry -TD
22956 # * corrected spelling of Michael A Dorman's name, prompted by
22957 # http://www.advogato.org/person/mdorman/diary.html -TD
22960 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22961 # * update xterm+pcfkeys to match xterm #216 -TD
22964 # * make descriptions of xterm entries consistent with its terminfo -TD
22967 # * add xfce, mgt -TD
22970 # * correct acsc string in kterm -TD
22973 # * add kon entry -TD
22974 # * remove invis from linux and related entries, add klone+sgr8 for those
22975 # that implement the feature (or have not been shown to lack it) -TD
22978 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22979 # * minor improvements to rxvt+pcfkeys -TD
22982 # * fix a few typos in if/then/else expressions -TD
22985 # * add several GNU Screen variations with 16- and 256-colors, and
22986 # status line (Alain Bench).
22989 # * add Newbury Data entries (Jean-Charles Billaud).
22992 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22995 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22996 # * add konsole-256color entry -TD
22999 # * add 9term entry (request by Juhapekka Tolvanen) -TD
23002 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
23003 # * add shift-control- and control-modified keys for rxvt editing
23005 # * update mlterm entry to 2.9.3 -TD
23006 # * add mlterm+pcfkeys -TD
23009 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
23010 # xterm+pcc0, etc., to make the corresponding building blocks reflect
23011 # xterm's capabilities -TD
23012 # * add mrxvt entry -TD
23013 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
23016 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
23019 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
23020 # xterm starting with patch #216 -TD
23021 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
23022 # to match xterm #230 -TD
23023 # * extend xterm+pccX entries to match xterm #230 -TD
23024 # * add xterm+app, xterm+noapp, from xterm #230 -TD
23025 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
23028 # * add screen.rxvt -TD
23031 # * add screen+fkeys (prompted by Debian #478094) -TD
23034 # * add screen.mlterm -TD
23035 # * improve mlterm and mlterm+pcfkeys -TD
23038 # * add Eterm-256color, Eterm-88color -TD
23039 # * add rxvt-88color -TD
23042 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
23043 # original to teraterm2.3 -TD
23044 # * update "gnome" to 2.22.3 -TD
23045 # * update "konsole" to 1.6.6 -TD
23046 # * add "aterm" -TD
23047 # * add "linux2.6.26" -TD
23050 # * change several \E[2g (clear tab at current column) to \E[3g
23051 # (clear all tabs) to match definition for tbc capability -TD
23054 # * add eterm-color -TD
23057 # * add screen.Eterm -TD
23060 # * correct typo in pfkey of ansi.sys-old
23061 # (report by Kalle Olavi Niemitalo)
23062 # * move function- and cursor-keys from emx-base to ansi.sys, and create
23063 # a pfkey capability which handles F1-F48 -TD
23066 # * add vwmterm entry (Bryan Christ)
23069 # * change ncv and op capabilities in sun-color to match Sun's entry for
23070 # this (report by Laszlo Peter)
23071 # * improve interix smso by using reverse rather than bold (report by
23072 # Kristof Zelechovski).
23075 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
23076 # * add linux-16color (Benjamin Sittler)
23077 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
23078 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
23079 # * add ccc and initc capabilities to xterm-16color -TD
23082 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
23085 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
23088 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
23089 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
23092 # * add bterm (bogl 0.1.18) -TD
23093 # * minor fix to rxvt+pcfkeys -TD
23096 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
23099 # * add several screen-bce.XXX entries -TD
23102 # * modify screen-bce.XXX entries to exclude ech, since screen's color
23103 # model does not clear with color for that feature -TD
23106 # * rename atari and st52 to atari-old, st52-old, use newer entries from
23107 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
23110 # * add mlterm+256color entry -TD
23113 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
23114 # the alternate character set (patch by Nicholas Marriott)
23117 # * improve acsc for vt52 (Benjamin Sittler)
23118 # * modify nsterm entries for consistent sgr/sgr0 -TD
23119 # * modify xnuppc entries for consistent sgr/sgr0 -TD
23120 # * add invis to tek4115 sgr -TD
23123 # * reformat acsc strings to canonical format -TD
23126 # * add "XT" capability to entries for terminals that support both
23127 # xterm-style mouse- and title-controls, for "screen" which
23128 # special-cases TERM beginning with "xterm" or "rxvt" -TD
23131 # * fill in no-parameter forms of cursor-movement where a parameterized
23132 # form is available -TD
23133 # * fill in missing cursor controls where the form of the controls is
23135 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
23138 # * correct comparison used for setting 16-colors in linux-16color
23139 # entry (Novell #644831) -TD
23140 # * improve linux-16color entry, using "dim" for color-8 which makes it
23141 # gray rather than black like color-0 -TD
23144 # * make "vte" the principal entry defining "gnome", since GNOME terminal
23145 # is merely one of several terminals whose behavior is provided by this
23149 # * fix typo in rmso for tek4106 -Goran Weinholt
23152 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
23153 # * also suppress ncv in konsole-base -TD
23156 # * add U8 feature to denote entries for terminal emulators which do not
23157 # support VT100 SI/SO when processing UTF-8 encoding -TD
23158 # * add xterm-utf8 as a demo of the U8 feature -TD
23161 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
23164 # * update minix entry to minix 3.2 (Thomas Cort).
23167 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
23168 # * remove a backslash which continued comment, obscuring altos3
23169 # definition with OpenBSD toolset (Nicholas Marriott).
23172 # * add/use xterm+tmux chunk from xterm #271 -TD
23173 # * resync xterm-new entry from xterm #271 -TD
23174 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
23175 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
23176 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
23179 # * add kich1 to sun (Yuri Pankov)
23180 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
23183 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
23186 # * minor cleanup of X-terminal emulator section -TD
23187 # * add terminator entry -TD
23188 # * add simpleterm entry -TD
23191 # * add xterm+kbs fragment from xterm #272 -TD
23194 # * add pccon entries for OpenBSD console (Alexei Malinin)
23197 # * corrected old changelog comments -TD
23200 # * add putty-sco -TD
23203 # * add mach-gnu (Samuel Thibault)
23204 # * add mach-gnu-color, tweaks to mach-gnu -TD
23205 # * make sgr for sun-color agree with smso -TD
23206 # * make sgr for prism9 agree with other caps -TD
23207 # * make sgr for icl6404 agree with other caps -TD
23208 # * make sgr for ofcons agree with other caps -TD
23209 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
23210 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
23211 # * make sgr for avt-ns agree with other caps -TD
23214 # * make sgr for xterm-pcolor agree with other caps -TD
23215 # * make sgr for att5425 agree with other caps -TD
23216 # * make sgr for att630 agree with other caps -TD
23217 # * make sgr for linux entries agree with other caps -TD
23218 # * make sgr for tvi9065 agree with other caps -TD
23219 # * make sgr for ncr260vt200an agree with other caps -TD
23220 # * make sgr for ncr160vt100pp agree with other caps -TD
23221 # * make sgr for ncr260vt300an agree with other caps -TD
23222 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
23223 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
23226 # * correct order of use-clauses in st-256color -TD
23229 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
23232 # * document all of the user-defined capabilities in one place -TD
23233 # * add XT to some places to improve usefulness for other applications
23234 # than screen, which would like to pretend that xterm's title is
23235 # a status-line. -TD
23236 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
23237 # of ordering and overrides -TD
23240 # * add msgr to vt420, similar DEC vtXXX entries -TD
23241 # * add several missing vt420 capabilities from vt220 -TD
23242 # * factor out ansi+pp from several entries -TD
23243 # * change xterm+sl and xterm+sl-twm to include only the status-line
23244 # capabilities and not "use=xterm", making them more generally useful
23245 # as building-blocks -TD
23246 # * add dec+sl building block, as example -TD
23249 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
23250 # * add eslok flag to dec+sl -TD
23251 # * dec+sl applies to vt320 and up -TD
23252 # * drop wsl width from xterm+sl -TD
23253 # * reuse xterm+sl in putty and nsca-m -TD
23254 # * add ansi+tabs to vt520 -TD
23255 # * add ansi+enq to vt220-vt520 -TD
23258 # * remove p6 (bold) from opus3n1+ for consistency -TD
23259 # * remove acs stuff from env230 per clues in Ingres termcap -TD
23260 # * modify env230 sgr/sgr0 to match other capabilities -TD
23261 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
23262 # * make sgr for dku7202 agree with other caps -TD
23263 # * make sgr for ibmpc agree with other caps -TD
23264 # * make sgr for tek4107 agree with other caps -TD
23265 # * make sgr for ndr9500 agree with other caps -TD
23266 # * make sgr for sco-ansi agree with other caps -TD
23267 # * make sgr for d410 agree with other caps -TD
23268 # * make sgr for d210 agree with other caps -TD
23269 # * make sgr for d470c, d470c-7b agree with other caps -TD
23272 # * rewrite vt520 entry based on vt420 -TD
23273 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
23276 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
23277 # analysis by Martin Husemann).
23278 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
23279 # Onno van der Linden).
23280 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
23281 # * add kdch1, etc., to qvt108 -TD
23282 # * add dl1/il1 to some entries based on dl/il values -TD
23283 # * add dl to simpleterm -TD
23286 # * modify some older xterm entries to align with xterm source -TD
23287 # * separate "xterm-old" alias from "xterm-r6" -TD
23290 # * add E3 to xterm-basic and putty -TD
23293 # * add nsterm-256color, make this the default nsterm -TD
23294 # * remove bw from nsterm-bce, per testing with tack -TD
23297 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
23298 # (patch by Christian Persch).
23301 # * reviewed vte-2012, reverted most of the change since it was incorrect
23302 # based on testing with tack -TD
23303 # * un-cancel the initc in vte-256color, since this was implemented
23304 # starting with version 0.20 in 2009 -TD
23307 # * correct typo in sgr string for sun-color,
23308 # add bold for consistency with sgr,
23309 # change smso for consistency with sgr -TD
23310 # * correct typo in sgr string for terminator -TD
23311 # * add blink to the attributes masked by ncv in linux-16color (report
23312 # by Benjamin Sittler)
23315 # * change initialization for vt220, similar entries for consistency
23316 # with cursor-key strings (NetBSD #47674) -TD
23317 # * further improvements to linux-16color (Benjamin Sittler)
23320 # * move nsterm-related entries out of "obsolete" section to more
23321 # plausible "ansi consoles" -TD
23322 # * additional cleanup of table-of-contents by reordering -TD
23325 # * added note to clarify Terminal.app's non-emulation of the various
23326 # terminal types listed in the preferences dialog -TD
23329 # * use TS extension to describe xterm's title-escapes -TD
23330 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
23331 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
23332 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
23333 # (Debian #727119).
23334 # * simplify pfkey expression in ansi.sys -TD
23337 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
23340 # * updated notes for wsvt25 based on tack and vttest -TD
23341 # * add teken entry to show actual properties of FreeBSD's "xterm"
23345 # * add terminology entry -TD
23346 # * add mlterm3 entry, use that as "mlterm" -TD
23347 # * inherit mlterm-256color from mlterm -TD
23350 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
23353 # * cancel ccc in putty-256color and konsole-256color for consistency
23354 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
23355 # * add xterm+256setaf building block for various terminals which only
23356 # get the 256-color feature half-implemented -TD
23357 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
23361 # * add vt520ansi (Mike Gran)
23364 # * correct several entries which had termcap-style padding used in
23365 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
23366 # * correct syntax for padding in some entries: dg211, h19 -TD
23367 # * correct ti924-8 which had confused padding versus octal escapes -TD
23368 # * correct padding in sbi entry -TD
23371 # * update xterm-new to patch #305 -TD
23372 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
23373 # (italic). This was a long-ago typo in screen 3.1.1 which was
23374 # overlooked until a few terminal emulators implemented the feature -TD
23377 # + revert the change to screen; see notes for why this did not work -TD
23378 # + cancel sitm/ritm for entries which extend "screen", to work around
23379 # screen's hardcoded behavior for SGR 3 -TD
23381 ######## SHANTIH! SHANTIH! SHANTIH!