1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2024/03/09 20:01:40 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing (1-based),
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+rca2|ANSI relative cursor-addressing,
355 hpa=\E[%i%p1%dG, vpa=\E[%i%p1%dd,
356 ansi+cup|ANSI absolute cursor-addressing,
357 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
358 ansi+rep|ANSI repeat-character,
359 rep=%p1%c\E[%p2%{1}%-%db,
360 ansi+idl1|ANSI insert/delete one line,
362 ansi+idl|ANSI insert/delete lines,
363 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
364 ansi+idc1|ANSI insert/delete one character,
365 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
366 ansi+idc|ANSI insert/delete characters,
367 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
368 ansi+arrows|ANSI normal-mode home and cursor-keys,
369 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
371 ansi+apparrows|ANSI application-mode home and cursor-keys,
372 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\EOH,
374 ansi+sgr|ANSI graphic renditions,
375 blink=\E[5m, invis=\E[8m, rev=\E[7m,
376 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
378 ansi+sgrso|ANSI standout only,
379 rmso=\E[m, smso=\E[7m,
380 ansi+sgrul|ANSI underline only,
381 rmul=\E[m, smul=\E[4m,
382 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
384 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
386 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
387 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
389 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
391 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
393 # ECMA-48 does not specify scroll-regions, but most people consider it to be
394 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
395 ansi+csr|ANSI scroll-region plus cursor save & restore,
396 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
398 # The normal (ANSI) flavor of "media copy" building block asserts that
399 # characters sent to the printer do not echo on the screen. DEC terminals
400 # can also be put into autoprinter mode, where each line is sent to the
401 # printer as you move off that line, e.g., by a carriage return.
402 ansi+pp|ANSI printer port,
404 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
405 dec+pp|DEC autoprinter mode,
406 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
408 # The IBM PC alternate character set. Plug this into any Intel console entry.
409 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
410 # ROM graphics for control characters such as the diamond, up- and down-arrow.
411 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
412 # will work with any Intel console, they all seem to have inherited \E[11m
413 # from the ANSI.SYS de-facto standard.
414 klone+acs|alternate character set for ansi.sys displays,
415 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
416 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
417 \301w\302x\263y\363z\362{\343|\330}\234~\376,
418 rmacs=\E[10m, smacs=\E[11m,
420 # Highlight controls corresponding to the ANSI.SYS standard. Most
421 # console drivers for Intel boxes obey these. Makes the same assumption
422 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
423 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
424 klone+sgr|attribute control for ansi.sys displays,
425 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
426 rmso=\E[m, rmul=\E[m,
427 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
429 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
432 # Most Intel boxes do not treat "invis" (invisible) text.
433 klone+sgr8|attribute control for ansi.sys displays with invis,
435 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
436 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
439 # Highlight controls corresponding to the ANSI.SYS standard. *All*
440 # console drivers for Intel boxes obey these. Does not assume \E[11m will
441 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
442 # diamond and arrow characters under curses.
443 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
444 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
445 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
446 sgr0=\E[0;10m, smacs=\E[12m, use=ansi+sgrbold,
449 # KOI8-R (RFC1489) acs (alternate character set)
450 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
451 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
452 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
453 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
454 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
456 rmacs=\E[10m, smacs=\E[11m,
458 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
459 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
460 # but equivalent strings that don't rely on that coincidence:
461 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
462 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
463 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
464 # They match a subset of ECMA-48.
465 klone+color|color control for ansi.sys and ISO6429-compatible displays,
466 colors#8, ncv#3, pairs#64,
467 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
469 # This is better than klone+color, it doesn't assume white-on-black as the
470 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
471 ecma+color|color control for ECMA-48-compatible terminals,
473 op=\E[39;49m, use=klone+color,
475 ecma+italics|ECMA-48 italics,
476 ritm=\E[23m, sitm=\E[3m,
478 # Attribute control for ECMA-48-compatible terminals
479 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
480 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
482 ecma+strikeout|ECMA-48 strikeout/crossed-out,
483 rmxx=\E[29m, smxx=\E[9m,
485 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
487 ecma+index|ECMA-48 scroll up/down,
488 indn=\E[%p1%dS, rin=\E[%p1%dT,
490 # For comparison, here are all the capabilities implied by the Intel
491 # Binary Compatibility Standard (level 2) that fit within terminfo.
492 # For more detail on this rather pathetic standard, see the comments
493 # near the end of this file.
494 ibcs2|Intel Binary Compatibility Standard prescriptions,
495 cbt=\E[Z, clear=\Ec, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
496 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch=\E[%p1%dP,
497 dispc=\E=%p1%dg, ech=\E[%p1%dX, hpa=\E[%i%p1%dG, hts=\EH,
498 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, rc=\E7,
499 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
500 vpa=\E[%i%p1%dd, use=ansi+local, use=ecma+index,
502 #### ANSI/ECMA-48 terminals and terminal emulators
504 # See near the end of this file for details on ANSI conformance.
505 # Don't mess with these entries! Lots of other entries depend on them!
507 # This section lists entries in a least-capable to most-capable order.
508 # if you're in doubt about what `ANSI' matches yours, try them in that
509 # order and back off from the first that breaks.
511 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
512 # and more than one page of memory. It uses local motions instead of
513 # direct cursor addressing, and makes almost no assumptions. It does
514 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
515 ansi-mr|mem rel cup ANSI,
517 cols#80, lines#24, use=vanilla, use=ansi+erase,
520 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
521 # beware of screen size problems and memory relative cursor addressing.
522 ansi-mini|any ANSI terminal with pessimistic assumptions,
524 cols#80, lines#24, use=vanilla, use=ansi+cup,
527 # ansi-mtabs adds relative addressing and minimal tab support
528 ansi-mtabs|any ANSI terminal with pessimistic assumptions (relative addressing),
530 ht=^I, use=ansi-mini, use=ansi+local1,
532 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
534 # The following is an entry for the full ANSI 3.64 (1977). It lacks
535 # padding, but most terminals using the standard are "fast" enough
536 # not to require any -- even at 9600 bps. If you encounter problems,
537 # try including the padding specifications.
539 # Note: the :as: and :ae: specifications are not implemented here, for
540 # the available termcap documentation does not make clear WHICH alternate
541 # character set to specify. ANSI 3.64 seems to make allowances for several.
542 # Please make the appropriate adjustments to fit your needs -- that is
543 # if you will be using alternate character sets.
545 # There are very few terminals running the full ANSI 3.64 standard,
546 # so I could only test this entry on one verified terminal (Visual 102).
547 # I would appreciate the results on other terminals sent to me.
549 # Please report comments, changes, and problems to:
551 # U.S. MAIL: Hugh Hansard
554 # Atlanta, GA. 30322.
556 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
558 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
559 ansi77|ANSI 3.64 standard 1977 version,
561 cols#80, it#8, lines#24,
562 bel=^G, clear=\E[;H\E[2J, cr=\r, cub1=^H,
563 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M$<5*/>,
564 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED,
565 kf1=\EOP, kf2=\EOR, kf4=\EOS, nel=\r\ED, ri=\EM, rmir=\E[4l,
566 rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
567 use=ansi+arrows, use=ansi+csr, use=ansi+local1,
569 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
570 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
571 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
572 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
573 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
574 # to confuse many emulators. On the other hand, we can count on these programs
575 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
576 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
577 # ANSI.SYS influence.
578 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
579 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ANSI (mono mode),
582 bel=^G, cr=\r, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
583 home=\E[H, ht=^I, il1=\E[L, ind=\n, use=ansi+arrows,
584 use=ansi+erase, use=ansi+inittabs, use=ansi+local1,
587 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
588 lines#25, use=pcansi-m,
589 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
590 lines#33, use=pcansi-m,
591 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
592 lines#43, use=pcansi-m,
593 # The color versions. All PC emulators do color...
594 pcansi|ibm-pc terminal programs claiming to be ANSI,
595 use=klone+color, use=pcansi-m,
596 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
597 lines#25, use=pcansi,
598 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
599 lines#33, use=pcansi,
600 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
601 lines#43, use=pcansi,
603 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
604 # If you want pound signs rather than dollars, replace `B' with `A'
605 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
606 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
607 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
609 dch=\E[%p1%dP, dl=\E[%p1%dM, ech=\E[%p1%dX, el1=\E[1K,
610 hpa=\E[%i%p1%dG, ht=\E[I, ich=\E[%p1%d@, il=\E[%p1%dL,
611 kcbt=\E[Z, kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
612 rep=%p1%c\E[%p2%{1}%-%db, s0ds=\E(B, s1ds=\E)B,
613 s2ds=\E*B, s3ds=\E+B, vpa=\E[%i%p1%dd, use=ansi+local,
614 use=ecma+index, use=pcansi-m,
616 # ECMA-48 addresses three of the four capabilities here:
619 # 8.3.14 CPR - ACTIVE POSITION REPORT
620 # Notation: (Pn1;Pn2) Representation: CSI Pn1;Pn2 05/02
621 # Parameter default values: Pn1 = 1; Pn2 = 1
624 # 8.3.35 DSR - DEVICE ST A TUS REPORT
625 # Notation: (Ps) Representation: CSI Ps 06/14
626 # Parameter default value: Ps = 0
627 # DSR is used either to report the status of the sending device or to
628 # request a status report from the receiving device, depending on the
630 # 6 a report of the active presentation position or of the active data
631 # position in the form of ACTIVE POSITION REPORT (CPR) is requested
634 # 8.3.24 DA - DEVICE ATTRIBUTES
635 # Notation: (Ps) Representation: CSI Ps 06/03
636 # Parameter default value: Ps = 0
637 # With a parameter value not equal to 0, DA is used to identify the
638 # device which sends the DA. The parameter value is a device type
639 # identification code according to a register which is to be established.
640 # If the parameter value is 0, DA is used to request an identifying DA
643 # DEC (and most "ANSI") terminals reply with a private-mode ("?") sequence,
644 # but that register "which is to be" in ECMA-48 was never established.
645 # For terminals that support DA1, a more specific u8 capability is preferred,
646 # except for those (such as xterm) which can be configured to return different
648 ansi+cpr|ncurses extension for ANSI CPR,
649 u6=\E[%i%d;%dR, u7=\E[6n,
650 ansi+enq|ncurses extension for ANSI ENQ,
651 u8=\E[?%[;0123456789]c, u9=\E[c, use=ansi+cpr,
652 # DEC terminals provided DECID, subsumed into DA1:
653 decid+cpr|ncurses extension for DECID,
654 u8=\E[?%[;0123456789]c, u9=\EZ, use=ansi+cpr,
656 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
657 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
658 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
659 ansi|ansi/pc-term compatible with color,
660 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
662 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
663 # all the normal ANSI stuff with no extensions. It assumes
664 # insert/delete line/char is there, so it won't work with
665 # VT100 clones. It assumes video attributes for bold, blink,
666 # underline, and reverse, which won't matter much if the terminal
667 # can't do some of those. Padding is assumed to be zero, which
668 # shouldn't hurt since xon/xoff is assumed.
669 ansi-generic|ansiterm|generic ANSI standard terminal,
671 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
672 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
673 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
674 use=ansi+sgrbold, use=ansi+arrows,
676 #### DOS ANSI.SYS variants
678 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
679 # documentation (except for the keyboard key reassignment feature, which
680 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
681 # though undocumented. The <pfkey> capability is untested but should work for
682 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
683 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
685 # DOS 2.0 (January 1983) documented these features in
686 # Chapter 13, "Using Extended Screen and Keyboard Control" -TD
687 ansi.sys-old|ANSI.SYS under PC-DOS 2.0,
688 OTbs, am, mir, msgr, xon,
690 clear=\E[2J, cub1=^H, cup=\E[%i%p1%d;%p2%dH, el=\E[k,
691 home=\E[H, is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L,
692 kcuu1=^K, khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p,
693 rc=\E[u, rmam=\E[?7l, sc=\E[s, smam=\E[?7h, use=ansi+cpr,
694 use=ansi+local1, use=klone+color, use=klone+sgr8,
696 # Keypad: Home=\0G Up=\0H PrPag=\0I
697 # ka1,kh kcuu1 kpp,ka3
699 # Left=\0K 5=\0L Right=\0M
702 # End=\0O Down=\0P NxPag=\0Q
703 # kc1,kend kcud1 kc3,knp
708 # On keyboard with 12 function keys,
709 # shifted f-keys: F13-F24
710 # control f-keys: F25-F36
711 # alt f-keys: F37-F48
712 # The shift/control/alt keys do not modify each other, but alt overrides both,
713 # and control overrides shift.
715 # <pfkey> capability for F1-F48 -TD
716 ansi.sys|ANSI.SYS 3.1 and later versions,
717 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kc1=\0O, kc3=\0Q,
718 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
719 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
720 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
721 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
722 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
723 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
724 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
725 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
726 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
727 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
728 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
729 pfkey=\E[0;%?%p1%{11}%<%t%':'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
730 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
731 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
732 use=ansi+arrows, use=ansi.sys-old,
735 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
736 # This should only be used when the terminal emulator cannot redefine the keys.
737 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
738 # definitions must be restored. If the terminal emulator is quit while in vi
739 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
740 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
741 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
742 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
743 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
744 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
745 # Consequently the End keypad key could not be set (it is relatively safe and
746 # actually useful because it sends ^@ O, which beeps and opens a line above).
747 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
748 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
749 \svi\s9-29-86\n\E[;75;8p,
750 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
751 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
752 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
753 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
756 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
757 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
758 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
759 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
762 # See ansi.sysk and nansi.sys above.
763 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
764 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
765 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
766 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
769 #### Atari ST terminals
771 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
773 tw52|tw52-color|Toswin window manager with color,
775 colors#16, pairs#0x100,
776 oc=\Eb?\Ec0, op=\Eb?\Ec0,
777 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
779 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
781 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
783 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
786 tw52-m|Toswin window manager monochrome,
789 bold=\Eya, dch1=\Ea, dim=\EyB,
790 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
791 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
792 smso=\EyQ, smul=\EyH, use=at-m,
793 tt52|Atari TT medium and high resolution,
794 lines#30, use=at-color,
795 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
797 colors#16, pairs#0x100,
798 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
799 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
800 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
801 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
802 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
804 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
805 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
806 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
807 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
809 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
810 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
811 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
812 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
814 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
815 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
816 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
817 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
820 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
822 civis=\Ef, clear=\EE, cnorm=\Ee, dl1=\EM, el1=\Eo, il1=\EL,
823 is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kdch1=^?, kf1=\EP,
824 kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et,
825 kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, kf20=\Ey,
826 kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX,
827 khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK,
828 rc=\Ek, rev=\Ep, rmso=\Eq, rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq,
829 smso=\Ep, use=vt52-basic,
830 tw100|Toswin VT100 window manager,
832 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
833 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
835 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
836 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, cub1=^H, cud1=\EB,
837 cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, cuu1=\EA, dch1=\Ea,
838 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
839 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il1=\EL,
840 ind=\n, is2=\E<\E)0, kdch1=^?, kf1=\EOP, kf10=\EOY, kf11=\Ep,
841 kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev,
842 kf18=\Ew, kf19=\Ex, kf2=\EOQ, kf20=\Ey, kf3=\EOR, kf4=\EOS,
843 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khlp=\EH,
844 khome=\E\EE, kich1=\EI, knp=\Eb, kpp=\E\Ea, kund=\EK,
845 ll=\E[24H, nel=\EE, oc=\E[30;47m, op=\E[30;47m, rev=\E[7m,
846 ri=\EM, rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
847 rmso=\E[m, rmul=\E[m,
848 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
849 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
850 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
852 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
853 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
855 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
856 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
857 use=ansi+apparrows, use=ansi+csr, use=ansi+local,
859 # The entries for stv52 and stv52pc probably need a revision.
860 stv52|MiNT virtual console,
863 blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, cnorm=\E. \Ee,
864 cub1=^H, cvvis=\E.", dim=\Em, dl1=\EM, il1=\EL, ind=\n$<2*/>,
865 kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er,
866 kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex,
867 kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV,
868 kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb,
869 kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, op=\Eb@\EcO, rev=\Ep,
870 ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, rmul=\EzH,
871 rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, smso=\Ep,
872 smul=\EyH, use=vt52-basic,
873 stv52pc|MiNT virtual console with PC charset,
876 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
877 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
878 \363z\362{\343|\366}\234~\371,
879 blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, cnorm=\E. \Ee,
880 cub1=^H, cvvis=\E.", dim=\Em, dl1=\EM, il1=\EL, ind=\n$<2*/>,
881 kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er,
882 kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex,
883 kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV,
884 kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb,
885 kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, rev=\Ep, ri=\EI$<2*/>,
886 rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, rmul=\EzH,
887 rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, smso=\Ep,
888 smul=\EyH, use=vt52-basic,
890 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
893 cols#80, it#8, lines#25,
894 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
895 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
896 ed=\EJ, el=\EK, ht=^I, il1=\EL, ri=\EI, rmso=\Eq, sgr0=\Eq,
897 smso=\Ep, use=vt52+arrows,
898 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
899 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
900 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
902 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base,
903 # MiNT VT52 emulation. 80 columns, 25 rows.
904 # MiNT is Now TOS, the operating system which comes with all Ataris now
905 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
906 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
907 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
908 st52-old|Atari ST with VT52 emulation,
911 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
912 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
913 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
914 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
915 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
916 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
917 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
918 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
919 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
924 # BeOS entry for Terminal program Seems to be almost ANSI
925 beterm|BeOS Terminal,
926 am, eo, mir, msgr, xenl, xon,
927 cols#80, it#8, lines#25, ncv#5,
928 bel=^G, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
929 cup=\E[%i%p1%d;%p2%dH, ech=\E[%p1%dX, el1=\E[1K,
930 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ind=\n,
931 kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, kf12=\E[22~,
932 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~,
933 kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, khome=\E[1~, kspd=^Z,
934 nel=\r\n, op=\E[m, rev=\E[7m, ri=\EM, rmkx=\E[?4l, rmso=\E[m,
935 rmul=\E[24m, rs1=\Ec, setb=\E[%p1%{40}%+%cm,
936 setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smkx=\E[?4h,
937 smso=\E[7m, smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
938 vpa=\E[%i%p1%dd, use=ansi+arrows, use=ansi+csr,
939 use=ansi+erase, use=ansi+idc, use=ansi+idl,
940 use=ansi+local, use=klone+color, use=vt220+pcedit,
945 # release 1.2.13: 1995/03
947 # This entry is good for the 1.2.13 or later version of the Linux console.
949 # ***************************************************************************
952 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
953 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
954 # * character. Here are the keymap replacement lines that will set this up: *
956 # keycode 15 = Tab Tab
957 # alt keycode 15 = Meta_Tab
958 # shift keycode 15 = F26
959 # string F26 ="\033[Z"
961 # * This has to use a key slot which is unfortunate (any unused one will *
962 # * do, F26 is the higher-numbered one). The change ought to be built *
963 # * into the kernel tables. *
965 # ***************************************************************************
967 # All linux kernels since 1.2.13 (at least) set the screen size
968 # themselves; this entry assumes that capability.
970 linux-basic|Linux console (basic),
971 am, bce, eo, mir, msgr, xenl, xon,
973 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
974 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
975 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
976 bel=^G, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
977 dim=\E[2m, ech=\E[%p1%dX, el1=\E[1K,
978 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
979 ht=^I, hts=\EH, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z, kf1=\E[[A,
980 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B,
981 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
982 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kmous=\E[M, kspd=^Z,
983 nel=\r\n, ri=\EM, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
985 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
986 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
987 smam=\E[?7h, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+arrows,
988 use=ansi+csr, use=ansi+erase, use=ansi+idc, use=ansi+idl,
989 use=ansi+local, use=vt220+pcedit, use=vt102+enq,
990 use=klone+sgr, use=ecma+color, use=linux+sfkeys,
992 linux+decid|ncurses extension for Linux console DECID,
993 u8=\E[?6c, use=decid+cpr,
995 linux+sfkeys|shifted function-keys for Linux console,
996 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
997 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
999 linux-m|Linux console no color,
1001 setab@, setaf@, setb@, setf@, use=linux,
1003 # release 1.3: 1995/06
1005 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1006 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1007 # not supposedly back-portable to older SV curses (although it has worked fine
1008 # on Solaris for several years) and not supported in ncurses versions before
1010 linux-c-nc|Linux console with color-change,
1012 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1013 %02x%p4%{255}%*%{1000}%/%02x,
1014 oc=\E]R, use=linux-basic,
1015 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1016 linux-c|Linux console 1.3.6+ for older ncurses,
1018 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1019 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1020 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1021 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1022 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1023 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1024 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1025 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1027 oc=\E]R, use=linux-basic,
1029 # release 2.2: 1999/01
1031 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1032 # get a block cursor for cvvis.
1033 # reported by Frank Heckenbach <frank@g-n-u.de>.
1034 linux2.2|Linux 2.2.x console,
1035 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1036 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1038 # release 2.6: 2003/12 - 2004/12
1040 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1041 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1042 # Although the kernel has mappings for these, they were not in the default
1043 # font (tested with Debian and Fedora):
1050 # The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature
1051 # misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only
1052 # omits the line-drawing using SI/SO, but also part/all of the Unicode feature:
1054 # https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html
1055 # "This enables support for font mapping and Unicode translation on virtual consoles."
1057 # This mailing list thread in July 2008 illustrates:
1059 # https://marc.info/?t=121734656700005&r=1&w=4
1060 # "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1"
1062 # The change which made it configurable was to reduce the size for use in
1063 # embedded systems. Some background is found in
1065 # https://lwn.net/Articles/284767/
1066 # "An interview with the new embedded maintainers"
1067 linux2.6|Linux 2.6.x console,
1068 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1070 enacs=\E)0, rmacs=^O,
1071 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1072 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1073 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1075 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1076 # It is the same as xterm's erase-saved-lines feature.
1078 # Linux 3.0 was released in July 2011. The keyboard utilities (kbd) are
1079 # used for configuring its keyboard mappings.
1081 # kbd 1.14 was released before that (January 2008), but due to its placement
1082 # late in the Linux 2.6.x series had no immediate effect for most users. That
1083 # provided a default mapping for shift-tab to the (misnamed) Meta_Tab, i.e.,
1084 # the same as Alt-Tab.
1086 # The suggested mapping for the conventional \E[Z is provided in this entry as
1087 # an extended key to lessen user surprise -TD
1088 linux3.0|Linux 3.0 kernels,
1089 kcbt=\E^I, E3=\E[3J, kcbt2=\E[Z, use=linux2.6,
1091 # This is Linux console for ncurses.
1092 linux|Linux console,
1095 # Subject: linux 2.6.26 vt back_color_erase
1096 # Changes to the Linux console driver broke bce model as reported in
1097 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1099 # http://lkml.org/lkml/2008/4/26/305
1100 # http://lkml.org/lkml/2008/10/3/66
1101 linux2.6.26|Linux console w/o bce,
1104 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1105 linux-nic|Linux with ich/ich1 suppressed for non-curses programs,
1106 ich@, ich1@, use=linux,
1108 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1109 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1110 linux-koi8|Linux with koi8 alternate character set,
1111 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1112 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1113 \211w\210x\201y\230z\231{\267|\274~\224,
1114 use=linux, use=klone+koi8acs,
1116 # Another entry for KOI8-r with Qing Long's acsc.
1117 # (which one better complies with the standard?)
1118 linux-koi8r|Linux with koi8-r alternate character set,
1119 use=linux, use=klone+koi8acs,
1121 # Entry for the latin1 and latin2 fonts
1122 linux-lat|Linux with latin1 or latin2 alternate character set,
1123 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1124 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1125 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1128 # This uses graphics from VT codeset instead of from cp437.
1129 # reason: cp437 (aka "straight to font") is not functional under luit.
1130 # from: Andrey V Lukyanov <land@long.yar.ru>.
1131 linux-vt|Linux console using VT codes for graphics,
1132 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1134 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1137 # release: 0.3.9b 1997/01 to 2000/05
1139 # This is based on the Linux console (relies on the console to perform some
1140 # of the functionality), but does not recognize as many control sequences.
1141 # The program comes bundled with an old (circa 1998) copy of the Linux
1142 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1143 # \E* move cursor to home, as as \E[H
1145 # \EE move cursor to beginning of row
1146 # \E[y,xf same as \E[y,xH
1148 # Note: The status-line support is buggy (dsl does not work).
1149 kon|kon2|Kanji ON Linux console,
1150 am, bce, ccc, eo, eslok, hs, mir, msgr, xenl, xon,
1152 bel=^G, civis=\E[?25l, cnorm=\E[?25h, cr=\r, cub1=^H,
1153 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dim=\E[2m,
1154 dsl=\E[?H\E[?E, el1=\E[1K, fsl=\E[?F, home=\E[H,
1155 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ind=\n,
1156 initc=\E]P%p1%x%p2%02x%p3%02x%p4%02x, kb2=\E[G, kbs=^?,
1157 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
1158 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
1159 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
1160 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
1161 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kspd=^Z,
1162 nel=\r\n, op=\E[37;40m, ri=\EM, rmso=\E[27m, rmul=\E[24m,
1164 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1165 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1166 sgr0=\E[0;10m, tbc=\E[3g, tsl=\E[?T, u8=\E[?6c,
1167 vpa=\E[%i%p1%dd, use=ansi+arrows, use=ansi+csr,
1168 use=ansi+enq, use=ansi+erase, use=ansi+idc, use=ansi+idl,
1169 use=ansi+local, use=ansi+sgrbold, use=ecma+sgr,
1170 use=klone+color, use=vt220+pcedit,
1172 # release: 0.4.7 2005/05
1174 jfbterm|japanese framebuffer terminal,
1175 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1177 sgr0=\E[0m, use=kon,
1180 # Another variant. There are two parts (src, src/lib) with the latter
1181 # comprising the escape-sequence parsing. The copyright notice on that
1182 # says it is based on GTerm by Timothy Miller.
1184 # The original developer "dragchan" has left, but as of March 2017 there is
1185 # (still dead) code from May 2015 here:
1186 # https://github.com/izmntuk/fbterm
1188 # The acsc string may be incorrect.
1190 # Not used here, the program recognizes escapes for italic, underline and
1191 # dim, rendering those as green, cyan and gray respectively.
1192 fbterm|FbTerm for Linux with framebuffer,
1193 colors#0x100, pairs#0x10000,
1194 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1195 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1196 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1197 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1198 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1199 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1200 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1201 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1203 # 16-color linux console entry; this works with a 256-character
1204 # console font but bright background colors turn into dim ones when
1205 # you use a 512-character console font. This uses bold for bright
1206 # foreground colors and blink for bright background colors.
1208 # Interestingly, the original version of this entry in 2009 used a documented
1209 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1210 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1211 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1212 # suggested a different use for that particular code:
1214 # https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
1216 # Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
1218 # https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
1220 # For background, refer to the report on bug-ncurses:
1222 # https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
1223 linux-16color|Linux console with 16 colors,
1224 colors#16, ncv#42, pairs#0x100,
1225 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1226 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1229 # bterm (bogl 0.1.18)
1230 # Implementation is in bogl-term.c
1231 # Key capabilities from linux terminfo entry
1234 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1235 # bterm does not support sgr, since it only processes one parameter -TD
1236 bterm|bogl virtual terminal,
1238 colors#8, cols#80, lines#24, pairs#64,
1239 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J,
1240 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
1241 el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1242 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
1243 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
1244 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
1245 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
1246 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
1247 kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[49m\E[39m, rev=\E[7m,
1248 ri=\EM, rmacs=^O, rmso=\E[27m, rmul=\E[24m,
1249 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m, smacs=^N,
1250 smso=\E[7m, smul=\E[4m, use=ansi+arrows,
1251 use=vt220+pcedit, use=vt220+cvis,
1256 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1259 cols#80, it#8, lines#25,
1260 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r, cub1=^H,
1261 cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K,
1262 home=\E[H, ht=^I, ind=\n, kbs=^?, kdch1=\E[9, kend=\E[Y,
1263 kf1=\EOP, kf10=\EOY, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
1264 kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, kich1=\E[@, kll=\E[F,
1265 knp=\E[U, kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m,
1266 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
1267 use=ansi+idl, use=ansi+local,
1269 mach-bold|Mach console with bold instead of underline,
1270 rmul=\E[0m, smul=\E[1m, use=mach,
1271 mach-color|Mach console with ANSI color,
1273 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1274 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1276 # From: Samuel Thibault
1277 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1278 # Files: i386/i386at/kd.c
1280 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1282 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1283 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1284 \263y\363z\362{\343|\330}\234~\376,
1285 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1286 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1287 invis=\E[8m, nel=\EE,
1288 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1289 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1290 use=ecma+index, use=mach,
1292 mach-gnu-color|GNU Mach console with ANSI color,
1294 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1295 setaf=\E[3%p1%dm, use=mach-gnu,
1297 # From: Marcus Brinkmann
1298 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
1300 # Comments in the original are summarized here:
1302 # hurd uses 8-bit characters (km).
1304 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1306 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1307 # have the eat_newline_glitch. It doesn't support setting or removing tab
1310 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1311 # one byte instead three.
1313 # <ich1> is not included because hurd has insert mode.
1315 # hurd doesn't use ^J for scrolling, because this could put things into the
1316 # scrollback buffer.
1318 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1319 # This is a GNU extension.
1321 # The original has commented-out ncv, but is restored here.
1323 # Reading the source, RIS resets cnorm, but not xmous.
1324 hurd|The GNU Hurd console server,
1325 am, bce, bw, eo, km, mir, msgr, xenl, xon, NQ,
1327 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1329 bel=^G, cbt=\E[Z, clear=\Ec, cr=\r, cub1=^H, cvvis=\E[34l,
1330 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1331 el1=\E[1K, flash=\Eg, ht=^I, ich=\E[%p1%d@, ind=\E[S,
1332 kb2=\E[G, kbs=^?, kcbt=\E[Z, kf1=\EOP, kf10=\E[21~,
1333 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1334 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1335 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1336 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1337 khome=\E[1~, kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[39;49m,
1338 ri=\E[T, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
1340 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1341 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1342 smir=\E[4h, grbom=\E[>1l, gsbom=\E[>1h,
1343 use=ansi+apparrows, use=ansi+csr, use=ansi+cup,
1344 use=ansi+erase, use=ansi+idl, use=ansi+local,
1345 use=ansi+rca2, use=ansi+sgrbold, use=vt220+pcedit,
1346 use=ecma+index, use=ecma+italics, use=klone+acs,
1347 use=klone+color, use=vt220+cvis,
1353 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1354 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1355 # right corner without triggering a scroll. The ncurses terminfo library can
1356 # handle this case with the <ich1> capability, and prefers <am> for better
1357 # optimization. Bug: The <op> capability resets attributes.
1358 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1359 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1360 qnx|qnx4|QNX console,
1361 daisy, km, mir, msgr, xhpa, xt,
1362 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1363 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1364 \303u\264v\301w\302x\263,
1365 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1366 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1367 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1368 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1369 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1370 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1371 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1372 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1373 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1374 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1375 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1376 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1377 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1378 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1379 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1380 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1381 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1382 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1383 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1384 kext=\377\270, kf1=\377\201, kf10=\377\212,
1385 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1386 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1387 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1388 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1389 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1390 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1391 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1392 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1393 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1394 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1395 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1396 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1397 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1398 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1399 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1400 khlp=\377\350, khome=\377\240, khts=\377\342,
1401 kich1=\377\253, kil1=\377\273, kind=\377\261,
1402 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1403 knp=\377\252, knxt=\377\312, kopn=\377\357,
1404 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1405 kprv=\377\302, krdo=\377\336, kref=\377\354,
1406 kres=\377\360, krfr=\377\347, kri=\377\271,
1407 krmir=\377\313, krpl=\377\362, krst=\377\352,
1408 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1409 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1410 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1411 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1412 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1416 qnxt|qnxt4|QNX4 terminal,
1419 qnxm|QNX4 with mouse events,
1421 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1422 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1423 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1424 smicm=\E/>2h, use=qnx4,
1429 # Monochrome QNX4 terminal or console. Setting this terminal type will
1430 # allow an application running on a color console to behave as if it
1431 # were a monochrome terminal. Output will be through stdout instead of
1432 # console writes because the term routines will recognize that the
1433 # terminal name starts with 'qnxt'.
1435 qnxtmono|Monochrome QNX4 terminal or console,
1439 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1440 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1441 # (TD: derive from original qnx4 entry)
1442 qnxt2|QNX 2.15 serial terminal,
1444 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1445 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1447 # QNX ANSI terminal definition
1450 colors#8, cols#80, lines#25, ncv#19, pairs#64, wsl#80,
1451 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1452 bel=^G, clear=\E[2J\E[H, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1453 cup=\E[%i%p1%d;%p2%dH$<5>, cvvis=\E[?12;25h,
1454 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
1455 dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1456 el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, fsl=\E[?6h\E8,
1457 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[1@,
1458 il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
1459 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1460 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1461 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1462 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1463 kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, kcmd=\E[G,
1464 kcpy=\E[g, kctab=\E[z, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1465 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1466 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1467 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1468 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1469 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1470 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1471 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1472 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1473 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1474 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1475 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1476 khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, kmov=\ENi,
1477 kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, kopt=\ENk,
1478 kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, kri=\E[b,
1479 krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, ktbc=\ENd,
1480 kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, ri=\E[T,
1481 rmacs=^O, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
1482 rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1483 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1484 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1486 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1488 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1489 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1490 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
1491 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+arrows,
1492 use=ansi+local, use=ansi+rep, use=ansi+inittabs,
1493 use=ansi+sgrbold, use=att610+cvis0, use=decid+cpr,
1496 qansi|QNX ANSI with console writes,
1497 daisy, xhpa, use=qansi-g,
1499 qansi-t|QNX ANSI without console writes,
1502 qansi-m|QNX ANSI with mouse,
1504 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1505 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1506 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1507 smicm=\E[>2h, use=qansi,
1509 qansi-w|QNX ANSI for windows,
1514 # SCO console and SOS-Syscons console for 386bsd
1515 # (scoansi: had unknown capabilities
1516 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1517 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1518 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1519 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1520 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1521 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1522 # on the <smacs>=\E[12m -- esr)
1524 # klone+sgr-dumb is an error since the acsc does not match -TD
1526 # In this description based on SCO's keyboard(HW) manpage list of default
1527 # function key values:
1528 # F13-F24 are shifted F1-F12
1529 # F25-F36 are control F1-F12
1530 # F37-F48 are shift+control F1-F12
1532 # hpa/vpa work in the console, but not in scoterm:
1536 # SCO's terminfo uses
1539 # which do not work (console or scoterm).
1541 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1542 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1543 OTbs, am, bce, eo, xon, NQ,
1544 colors#8, cols#80, it#8, lines#25, pairs#64,
1545 acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN
1546 OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3
1548 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1549 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1550 cub1=^H, cup=\E[%i%p1%d;%p2%dH, cvvis=\E[=0;12C,
1551 dch=\E[%p1%dP, dch1=\E[P, dispc=\E[=%p1%dg, ed=\E[m\E[J,
1552 el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
1553 ich=\E[%p1%d@, ich1=\E[@, ind=\E[S, invis=\E[8m, kbeg=\E[E,
1554 kcbt=\E[Z, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1555 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b,
1556 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
1557 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
1558 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
1559 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
1560 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
1561 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
1562 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
1563 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, kich1=\E[L,
1564 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1565 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1566 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1567 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1568 smul=\E[4m, use=ansi+arrows, use=ansi+idl,
1569 use=ansi+local, use=ecma+index,
1571 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1573 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1574 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1575 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1576 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1577 %p7%t;8%;%?%p9%t;12%e;10%;m,
1578 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1579 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1580 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1581 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1582 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1584 # make this easy to change...
1585 scoansi|SCO Extended ANSI standard crt,
1590 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1591 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1592 # for the application keypad mode. We have added iris-ansi-ap rather than
1593 # change the original to keypad mode.
1595 # (iris-ansi: added rmam/smam based on init string -- esr)
1597 # This entry, and those derived from it, is used in xwsh (also known as
1598 # winterm). Some capabilities that do not fit into the terminfo model
1599 # include the shift- and control-functionkeys:
1601 # F1-F12 generate different codes when shift or control modifiers are used.
1605 # control-F1 \E[025q
1607 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1608 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1610 # The cursor keys also have different codes:
1611 # control-up \E[162q
1612 # control-down \E[165q
1613 # control-left \E[159q
1614 # control-right \E[168q
1617 # shift-down \E[164q
1618 # shift-left \E[158q
1619 # shift-right \E[167q
1621 # control-tab \[072q
1623 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1625 cols#80, it#8, lines#40,
1626 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1627 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cud1=\n,
1628 cup=\E[%i%p1%d;%p2%dH,
1629 cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, ed=\E[J, el=\E[K,
1630 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\ED,
1631 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1632 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1633 kRIT=\E[167q, kSPD=\E[218q, kcbt=\E[Z, kdch1=^?,
1634 kend=\E[146q, kent=\r, kf1=\E[001q, kf10=\E[010q,
1635 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1636 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1637 kf8=\E[008q, kf9=\E[009q, kich1=\E[139q, knp=\E[154q,
1638 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1639 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1640 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1641 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1642 tbc=\E[3g, use=ansi+arrows, use=ansi+idl, use=ansi+local,
1644 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1645 is2=\E[?1l\E=\E[?7h, kent=\EOM, use=iris-ansi,
1647 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1648 # (T.Dickey 98/1/24)
1649 iris-color|xwsh|IRIX ANSI with color,
1651 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1652 ech=\E[%p1%dX, ich=\E[%p1%d@, rmul=\E[24m, rs1=\Ec,
1653 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1654 use=ecma+italics, use=vt100+enq, use=klone+color,
1657 #### OpenBSD consoles
1659 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1661 # The following terminal descriptions for the AMD/Intel PC console
1662 # were prepared based on information contained in the OpenBSD-4.9
1663 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1665 # Added bce based on testing with tack -TD
1666 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1667 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1669 # Notes from testing with vttest:
1670 # fails wrapping test
1672 # identifies as vt200 with selective erase, but does not implement DECSCA
1675 # ESC # 8 DEC Screen Alignment Test (DECALN).
1676 # CSI ? 5 h Reverse Video (DECSCNM).
1678 pccon+keys|OpenBSD PC keyboard keys,
1679 kbs=^?, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1680 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1681 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1682 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1683 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1684 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1685 kf9=\E[20~, khome=\E[7~, krfr=^R, use=ansi+arrows,
1687 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1688 acsc=+>\,<-\^.v0#`+a:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#
1690 bold=\E[1m, rev=\E[7m, rmso=\E[27m,
1691 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1692 sgr0=\E[m, smso=\E[7m,
1693 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1694 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1695 bold=\E[1m, enacs=\E)0, rev=\E[7m, rmacs=\E(B, rmso=\E[27m,
1696 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1698 sgr0=\E[m\E(B, smacs=\E(0, smso=\E[7m,
1699 # underline renders as color
1700 pccon+colors|ANSI colors for OpenBSD PC console,
1703 op=\E[49;39m, use=klone+color,
1704 # OpenBSD uses wscons,
1705 # + which does not implement DECSCNM or anything comparable, so it does not
1707 # + it renders underline using color.
1708 pccon+base|base capabilities for OpenBSD PC console,
1709 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1710 cols#80, it#8, lines#24,
1711 bel=^G, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
1712 dch=\E[%p1%dP, dch1=\E[P, ech=\E[%p1%dX, el1=\E[1K,
1713 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ind=\ED, nel=\EE,
1714 ri=\EM, rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, smam=\E[?7h,
1715 smul=\E[4m, tbc=\E[3g, use=ansi+cpr, use=ansi+csr,
1716 use=ansi+erase, use=ansi+idl, use=ansi+local,
1718 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1719 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1720 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1721 use=pccon0-m, use=pccon+colors,
1722 pccon-m|OpenBSD PC console without colors,
1723 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1724 use=ansi+enq, use=vt220+cvis,
1725 pccon|OpenBSD PC console,
1726 use=pccon-m, use=pccon+colors,
1728 #### NetBSD consoles
1730 # pcvt termcap database entries (corresponding to release 3.31)
1731 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1733 # (For the terminfo master file, I translated these into terminfo syntax.
1734 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1735 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1736 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1738 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1739 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1740 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1741 pcvtXX|pcvt VT200 emulator (DEC VT220),
1742 am, km, mir, msgr, xenl,
1744 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1746 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H,
1747 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
1748 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ind=\ED,
1749 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1750 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1751 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1752 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1753 nel=\EE, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
1754 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
1755 rmso=\E[27m, rmul=\E[24m,
1756 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
1757 smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
1758 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+apparrows,
1759 use=ansi+csr, use=ansi+erase, use=ansi+idl,
1760 use=ansi+local, use=decid+cpr, use=ecma+index,
1763 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1764 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1765 # 50 lines entries; 80 columns
1766 pcvt25|DEC VT220 emulation with 25 lines,
1768 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1769 pcvt28|DEC VT220 emulation with 28 lines,
1771 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1772 pcvt35|DEC VT220 emulation with 35 lines,
1774 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1775 pcvt40|DEC VT220 emulation with 40 lines,
1777 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1778 pcvt43|DEC VT220 emulation with 43 lines,
1780 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1781 pcvt50|DEC VT220 emulation with 50 lines,
1783 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1785 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1786 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1787 # 50 lines entries; 132 columns
1788 pcvt25w|DEC VT220 emulation with 25 lines and 132 cols,
1790 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1791 pcvt28w|DEC VT220 emulation with 28 lines and 132 cols,
1793 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1794 pcvt35w|DEC VT220 emulation with 35 lines and 132 cols,
1796 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1797 pcvt40w|DEC VT220 emulation with 40 lines and 132 cols,
1799 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1800 pcvt43w|DEC VT220 emulation with 43 lines and 132 cols,
1802 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1803 pcvt50w|DEC VT220 emulation with 50 lines and 132 cols,
1805 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1807 # OpenBSD implements a color variation
1808 pcvt25-color|DEC VT220 emulation with 25 lines and color,
1810 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1811 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1812 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1813 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1814 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1817 # Terminfo entries to enable the use of the ncurses library in colour on a
1818 # NetBSD-arm32 console (only tested on a RiscPC).
1819 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1820 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1821 # typo in invis - TD
1822 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1825 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1826 blink=\E[5m$<2>, bold=\E[1m$<2>, cub1=^H, cud1=\n,
1827 cuf1=\E[C$<2>, cuu1=\E[A$<2>, invis=\E[8m$<2>, ka1=\E[q,
1828 ka3=\E[s, kb2=\E[r, kc1=\E[p, kc3=\E[n, kent=\E[M, kf0=\E[y,
1829 kf1=\E[P, kf10=\E[x, kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t,
1830 kf6=\E[u, kf7=\E[v, kf8=\E[l, kf9=\E[w, rev=\E[7m$<2>,
1831 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1833 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1834 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1835 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1836 smso=\E[7m$<2>, smul=\E[4m$<2>, use=ansi+csr,
1837 use=ansi+local, use=ecma+sgr, use=vt100+4bsd,
1840 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1841 cols#132, lines#50, use=arm100,
1843 # NetBSD/x68k console VT200 emulator. This port runs on a 68K machine
1844 # manufactured by Sharp for the Japanese market.
1845 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1846 x68k|x68k-ite|NetBSD/x68k ITE,
1848 kbs=^?, kclr=\E[9~, khlp=\E[28~, use=vt220-base,
1851 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1853 # (still unfinished, but good enough so far.)
1854 ofcons|DNARD OpenFirmware console,
1857 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1858 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1859 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1860 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1861 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1862 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1863 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1864 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1865 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1866 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1867 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1868 rmso=\2330m, rmul=\2330m,
1869 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1870 %;%?%p1%p3%|%t;7%;m,
1871 sgr0=\2330m, smso=\2337m, smul=\2334m,
1873 # NetBSD "wscons" emulator in VT220 mode.
1874 # This entry is based on the NetBSD termcap entry. The emulator renders
1875 # underlined text in red. Colors are otherwise usable. NetBSD developers
1876 # prefer to not specify the corresponding ncv value.
1878 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1879 # that "vt220" is inaccurate. There are a few VT220-features, but most of the
1880 # VT220 screens in vttest do not work with this emulator. For instance, it
1881 # identifies itself (primary DA response) as a VT220 with selective erase. But
1882 # the selective erase feature does not work. The secondary response is copied
1883 # from Kermit's emulation of VT220, does not correspond to actual VT220. At
1884 # the level of detail in a termcap, it is a passable emulator, since ECH does
1885 # work. Don't use it on a VMS system -TD
1886 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1888 colors#8, lines#25, pairs#64,
1889 is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
1890 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
1891 khome=\E[7~, op=\E[m, rs1=\Ec, setab=\E[4%p1%dm,
1892 setaf=\E[3%p1%dm, use=vt220,
1894 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1897 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1899 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1900 # Initial testing set TERM=xterm, based on comments by developers, found too
1901 # many differences to continue in that path. However, test-results may be
1902 # useful to people curious about compatibility with xterm.
1904 # Testing with tack:
1906 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1907 # There is color-bleeding in the color-pairs screen.
1908 # Attributes do not work with color
1910 # Failed: kf1-kf4, kf13-kf48, khome, kend
1911 # (effectively xterm-r6 for function-keys)
1912 # None of the function or cursor key-modifiers are encoded.
1913 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1915 # Testing with vttest:
1916 # -------------------
1917 # Identifies as VT220 with selective erase
1918 # (however, selective erase refers to DECSCA, SPA)
1919 # Does not implement VT52
1920 # Uses spaces to simulate double-size characters
1921 # Does not support 8-bit controls
1922 # Does not support VT220 reports
1923 # Does not support send/receive mode
1924 # Supports ECH (like rxvt)
1925 # Does not support DECSCA
1926 # Does not support any of the ISO-6429 cursor-movement
1927 # Does not support any of the ISO-6429 miscellaneous tests
1928 # (SL/SR also leave unexpected char on screen too)
1929 # Background does not change in menu 11.6.9 (SGR 22-27)
1930 # None of the xterm special features tests work
1931 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1934 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1936 rcons|BSD rasterconsole,
1938 # Color version of above. Color currently only provided by NetBSD.
1939 rcons-color|BSD rasterconsole with ANSI color,
1942 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1944 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1945 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1946 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1947 # -- compare with cons25w
1948 mgterm|MGL/MGL2 MobileGear Graphic Library,
1949 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1950 colors#8, cols#80, it#8, lines#18, pairs#64,
1951 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, cr=\r, cub1=^H,
1952 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
1953 dim=\E[30;1m, ech=\E[%p1%dX, el1=\E[1K, home=\E[H,
1954 hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, ind=\E[S,
1955 kb2=\E[E, kcbt=\E[Z, kdch1=^?, kend=\E[F, kf1=\E[M,
1956 kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O,
1957 kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
1958 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m,
1959 ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, setb=\E[4%p1%dm,
1960 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1961 use=ansi+arrows, use=ansi+csr, use=ansi+erase,
1962 use=ansi+idl, use=ansi+local, use=ecma+index,
1964 #### FreeBSD console entries
1966 # Originally from termcap:
1968 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1969 # Andrey Chernov maintains the FreeBSD termcap distributions.
1971 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1972 # or comment out the :cb: capability in the console entry.
1974 # Alexander Lukyanov reports:
1975 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1976 # Now el1 clears not only to the line beginning, but also a large chunk
1977 # of previous line. But there is another bug - ech does not work at all.
1979 # syscons, sc - the console driver
1982 # common entry without semigraphics
1983 # Bug: The <op> capability resets attributes.
1984 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1985 # instance el1 does if the cursor is moved to the right margin first. Removed
1986 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1988 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1989 # Note that this disables standout with color.
1991 # The emulator sends different strings based on shift- and control-keys,
1993 # F13-F24 are shifted F1-F12
1994 # F25-F36 are control F1-F12
1995 # F37-F48 are shift+control F1-F12
1996 cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode),
1997 am, bce, bw, eo, msgr, npc,
1998 cols#80, it#8, lines#25, ncv#21,
1999 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, cnorm=\E[=0C,
2000 cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH, cvvis=\E[=1C,
2001 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, ech=\E[%p1%dX,
2002 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2003 ich1=\E[@, ind=\E[S, kb2=\E[E, kcbt=\E[Z, kdch1=^?,
2004 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
2005 kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2006 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2007 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2008 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2009 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2010 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2011 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2012 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2013 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, kich1=\E[L, knp=\E[G,
2014 kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T,
2015 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2016 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2018 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ansi+arrows,
2019 use=ansi+erase, use=ansi+idl, use=ansi+local,
2020 use=ecma+index, use=klone+color,
2022 cons25|ansis|ansi80x25|FreeBSD console (25-line ANSI mode),
2023 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2024 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2027 cons25-debian|FreeBSD console with debian backspace (25-line ANSI mode),
2028 kbs=^?, kdch1=\E[3~, use=cons25,
2029 cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ANSI mode),
2031 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2032 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2033 smul=\E[4m, use=cons25,
2034 cons30|ansi80x30|FreeBSD console (30-line ANSI mode),
2035 lines#30, use=cons25,
2036 cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ANSI mode),
2037 lines#30, use=cons25-m,
2038 cons43|ansi80x43|FreeBSD console (43-line ANSI mode),
2039 lines#43, use=cons25,
2040 cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ANSI mode),
2041 lines#43, use=cons25-m,
2042 cons50|ansil|ansi80x50|FreeBSD console (50-line ANSI mode),
2043 lines#50, use=cons25,
2044 cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ANSI mode),
2045 lines#50, use=cons25-m,
2046 cons60|ansi80x60|FreeBSD console (60-line ANSI mode),
2047 lines#60, use=cons25,
2048 cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ANSI mode),
2049 lines#60, use=cons25-m,
2050 cons25r|pc3r|ibmpc3r|cons25-koi8-r|FreeBSD console w/koi8-r cyrillic,
2051 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2052 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2055 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|FreeBSD console w/koi8-r cyrillic (mono),
2057 op@, rmul=\E[m, setab@, setaf@,
2058 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2059 %t;30;1%;%?%p6%t;1%;m,
2060 smul=\E[4m, use=cons25r,
2061 cons50r|cons50-koi8r|FreeBSD console w/koi8-r cyrillic (50 lines),
2062 lines#50, use=cons25r,
2063 cons50r-m|cons50-koi8r-m|FreeBSD console w/koi8-r cyrillic (50-line mono),
2064 lines#50, use=cons25r-m,
2065 cons60r|cons60-koi8r|FreeBSD console w/koi8-r cyrillic (60 lines),
2066 lines#60, use=cons25r,
2067 cons60r-m|cons60-koi8r-m|FreeBSD console w/koi8-r cyrillic (60-line mono),
2068 lines#60, use=cons25r-m,
2069 # ISO 8859-1 FreeBSD console
2070 cons25l1|cons25-iso8859|FreeBSD console w/iso 8859-1 chars,
2071 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2072 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2073 \226v\227w\230x\231y\232z\233~\237,
2075 cons25l1-m|cons25-iso-m|FreeBSD console w/iso 8859-1 chars (mono),
2077 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2078 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2079 smul=\E[4m, use=cons25l1,
2080 cons50l1|cons50-iso8859|FreeBSD console w/iso 8859-1 chars (50 lines),
2081 lines#50, use=cons25l1,
2082 cons50l1-m|cons50-iso-m|FreeBSD console w/iso 8859-1 chars (50-line mono),
2083 lines#50, use=cons25l1-m,
2084 cons60l1|cons60-iso|FreeBSD console w/iso 8859-1 chars (60 lines),
2085 lines#60, use=cons25l1,
2086 cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono),
2087 lines#60, use=cons25l1-m,
2089 # vt - virtual terminal console driver
2091 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2092 # which is intended to be xterm-compatible. See for example
2093 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2094 # in particular scterm-teken.c
2096 # Some of the documentation refers to this as "vt"; its proper name is "teken".
2098 # The sc(4) manual page states that it is possible to switch between the two
2099 # by editing /boot/loader.conf, adding
2101 # Doing that does not change the default TERM variable. That is hard-coded in
2102 # /etc/ttys, rather than deriving it from the kernel state.
2104 # For FreeBSD 12 and 13:
2105 # ---------------------
2106 # In newer releases, it is no longer possible to boot into a configuration that
2107 # works with syscons. According to efi(4),
2108 # "The vt(4) system console is automatically selected when booting via UEFI."
2109 # See FreeBSD #264226.
2111 # FreeBSD 13 supports 64-bit machines which boot with UEFI:
2112 # https://www.freebsd.org/platforms/
2113 # The i386 platform does not use UEFI (and modifying the loader configuration
2114 # does load sysconf); however because no updates (fixes) are available, most
2115 # developers will regard that as unsupported.
2117 # With FreeBSD 13, even when syscons is loaded (e.g., with the i386 platform),
2118 # its function-keys are not configured. Using
2119 # vidcontrol -T cons25
2122 # When teken is loaded, vidcontrol can switch at runtime between the
2123 # teken/cons25 function keys:
2124 # vidcontrol -T cons25
2125 # vidcontrol -T xterm
2126 # However due to a limitation in the implementation, only the first 12 function
2127 # keys are available. The real syscons supports 48 function keys (using the
2128 # shift and control modifiers), while xterm supports more than twice as many.
2130 # vidcontrol does not change the emulation. As a result, the quarter (17/73) of
2131 # non-function key capabilities which differ between syscons and teken are
2132 # unsupported in the UEFI-based configurations.
2135 # VT100 line-drawing does not work (UTF-8 equivalents do).
2136 # Shift/control modifiers have no effect on special keys.
2137 # Meta does not work.
2139 # supports REP (repeat).
2140 # still does not support left/right margins
2141 # SU/SD work, but not SL/SR
2142 # alternate screen does not work
2143 # ENQ/DA1 is unimplemented (the terminal does not identify itself)
2144 # CPR, XCPR are unimplemented (i.e., vttest and resize are broken)
2145 # implements X11 (original) xterm-mouse.
2147 # UTF-8 line-drawing works, including some double/thick lines
2149 # For FreeBSD 9 and 10:
2150 # --------------------
2151 # The /etc/ttys entries for console and other ttys are all configured to set
2154 # Testing with tack:
2155 # There is no VT100 line-drawing (uses +'s and -'s)
2156 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2158 # Testing with vttest:
2159 # Menu 2 diamonds don't work, blink ditto, light background ditto
2160 # The terminal identifies itself as VT100 with AVO
2161 # There is no VT52 support
2162 # There is no doublesize character support
2163 # The terminal supports ECH (like rxvt)
2164 # The terminal does not support send/receive mode
2165 # The terminal supports all of the ISO-6429 cursor-movement
2166 # The terminal supports some of the ISO-6429 miscellaneous tests
2167 # (SL/SR also leave unexpected char on screen too)
2169 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2170 # the cells which happen to have ASCII control-character values:
2171 # - ^X arrow pointing up
2172 # . ^Y arrow pointing down
2176 # Those are removed from this entry's acsc string to avoid confusion.
2177 # The resulting description provides correct line-drawing and function-keys -TD
2178 teken-2018|teken as of 2018,
2180 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2181 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2182 cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kdch1=\E[3~, kent=\r,
2183 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
2184 kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2185 kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2186 rmir=\E[4l, smir=\E[4h, tbc=\E[3g, use=vt220+cvis,
2189 teken-2022|teken as of 2022,
2190 am, bce, eo, mir, msgr, npc, NQ,
2191 cols#80, it#8, lines#25, ncv#21, U8#1,
2192 bold=\E[1m, cr=\r, cub1=^H, dim=\E[30;1m, ech=\E[%p1%dX,
2193 ind=\E[S, kent=\r, nel=\E[E, op=\E[x, rev=\E[7m, ri=\E[T,
2194 rmso=\E[27m, rs2=\E[x\E[m\Ec,
2195 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2196 sgr0=\E[m, use=vt220+cvis, use=ecma+index,
2197 use=ansi+arrows, use=ansi+csr, use=ansi+cup,
2198 use=ansi+erase, use=ansi+idc, use=ansi+idl,
2199 use=ansi+local, use=ansi+rca2, use=ansi+sgrso,
2200 use=ansi+tabs, use=klone+color,
2202 teken-vt+fkeys|teken's xterm special keys,
2203 kend=\E[F, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2204 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
2205 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2208 teken-sc+fkeys|teken's syscons special keys,
2209 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2210 kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R,
2211 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2214 teken-sc|teken imitating syscons,
2215 use=teken-sc+fkeys, use=teken-2022,
2217 teken|teken-vt|teken imitating xterm,
2218 xenl, use=teken-vt+fkeys, use=xterm+x11mouse,
2221 teken-16color|teken using 16 colors,
2222 use=ibm+16color, use=teken,
2224 #### 386BSD and BSD/OS Consoles
2227 # This was the original 386BSD console entry (I think).
2228 # Some places it's named oldpc3|oldibmpc3.
2229 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2230 origpc3|origibmpc3|IBM PC 386BSD console,
2231 OTbs, am, bw, eo, xon,
2233 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2235 bold=\E[7m, clear=\Ec, cub1=^H, cup=\E[%i%p1%2d;%p2%2dH,
2236 ed=\E[J, el=\E[K, home=\E[H, ind=\E[S, kcub1=\E[D,
2237 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[Y, ri=\E[T,
2238 rmso=\E[1;0x\E[2;7x, rmul=\E[1;0x\E[2;7x,
2239 sgr0=\E[m\E[1;0x\E[2;7x, smso=\E[1;7x\E[2;0x,
2240 smul=\E[1;7x\E[2;0x, use=ansi+local1,
2242 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2243 oldpc3|oldibmpc3|old IBM PC BSD/386 console,
2246 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2247 ht=^I, il1=\E[L, ind=\n, kich1=\E[L, kll=\E[F, knp=\E[G,
2248 kpp=\E[I, nel=\r\n, sgr0=\E[=R, use=ansi+arrows,
2250 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2251 # Note, the emulator supports many of the additional console features
2252 # listed in the iBCS2 (e.g. character-set selection) though not all
2253 # are described here. This entry really ought to be upgraded.
2254 # Also note, the console will also work with fewer lines after doing
2255 # "stty rows NN", e.g. to use 24 lines.
2256 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2257 # Bug: The <op> capability resets attributes.
2258 bsdos-pc|IBM PC BSD/OS console,
2259 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2260 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2261 use=bsdos-pc-nobold,
2263 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2264 use=klone+color, use=bsdos-pc-m,
2266 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2267 OTbs, am, eo, km, xon,
2268 cols#80, it#8, lines#25,
2269 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
2270 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2271 ind=\n, kich1=\E[L, kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n,
2273 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2274 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2275 use=ansi+arrows, use=ansi+idl, use=ansi+local,
2278 # Old names for BSD/OS PC console used in releases before 4.1.
2279 pc3|BSD/OS on the PC console,
2280 use=bsdos-pc-nobold,
2281 ibmpc3|pc3-bold|BSD/OS on the PC console with bold instead of underline,
2284 # BSD/OS on the SPARC
2285 bsdos-sparc|Sun SPARC BSD/OS console,
2288 # BSD/OS on the PowerPC
2289 bsdos-ppc|PowerPC BSD/OS console,
2294 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2296 # Actually (TD pointed this out at the time the acsc string was added):
2297 # VT52 shouldn't define full acsc since most of the cells don't match.
2298 # see VT100 manual page A-31. This is the list that does match:
2307 # The line-drawing happens to work in several terminal emulators, but should
2308 # not be used as a guide to the capabilities of the VT52. Note in particular
2309 # that VT52 does not support line-drawing characters (the scan-X values refer
2310 # to a crude plotting feature) -TD
2313 acsc=+h.k0affggolpnqprrss, rmacs=\EG, rmkx=\E>,
2314 smacs=\EF, smkx=\E=, u8=\E/[KL], use=vt50h, use=vt52-basic,
2316 # This is more likely the "vt52" that you would see in emulation, i.e., no
2317 # keypad, no graphics.
2318 vt52-basic|VT52 for emulators,
2319 cols#80, it#8, lines#24,
2320 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
2321 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2322 home=\EH, ht=^I, ind=\n, kbs=^H, nel=\r\n, ri=\EI,
2325 vt52+arrows|cursor keys for VT52,
2326 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
2328 #### DEC VT100 and compatibles
2330 # DEC terminals from the VT100 forward are collected here. Older DEC terminals
2331 # and micro consoles can be found in the `obsolete' section. More details on
2332 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2333 # found near the end of this file.
2335 # Except where noted, these entries are DEC's official terminfos.
2336 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2337 # Engineering for more information. Updated terminfos and termcaps
2338 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2340 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2341 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2342 # its name to Boundless Technologies; see http://www.boundless.com.
2345 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2346 # certainly includes what DEC called the `Level 1 editing extension' codes;
2347 # only the very oldest VT100s lacked these and there probably aren't any of
2348 # those left alive. To capture these, use one of the VT102 entries.
2350 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2351 # since the cursor is left in a different position while in the
2352 # weird state (concept at beginning of next line, vt100 at end
2353 # of this line) so all versions of vi before 3.7 don't handle
2354 # <xenl> right on vt100. The correct way to handle <xenl> is when
2355 # you output the char in column 80, immediately output CR LF
2356 # and then assume you are in column 1 of the next line. If <xenl>
2357 # is on, am should be on too.
2359 # I assume you have smooth scroll off or are at a slow enough baud
2360 # rate that it doesn't matter (1200? or less). Also this assumes
2361 # that you set auto-nl to "on", if you set it off use vt100-nam
2364 # The padding requirements listed here are guesses. It is strongly
2365 # recommended that xon/xoff be enabled, as this is assumed here.
2367 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2368 # tab settings are in non-volatile memory and don't need to be
2369 # reset upon login. Also setting the number of columns glitches
2370 # the screen annoyingly. You can type "reset" to get them set.
2372 # The VT100 series terminals have cursor ("arrows") keys which can operate
2373 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2374 # is the reset state, and is assumed to be the normal state. Application
2375 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2376 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2377 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2378 # was provided primarily as an aid to the porting of VT52 applications. It is
2379 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2380 # applications such as vi will always transmit the <smkx> string. Therefore,
2381 # the definitions for the cursor keys are made to match what the terminal
2382 # transmits after the <smkx> string is transmitted. If the <smkx> string
2383 # is a null string or is not defined, then cursor keys are assumed to be in
2384 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2385 # else the application may fail. It is also expected that applications will
2386 # always transmit the <rmkx> string to the terminal before they exit.
2388 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2389 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2390 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2391 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2392 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2393 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2394 # Enter key transmits the same as the Return key (Note: the Return key
2395 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2396 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2397 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2398 # is normally in Numeric Mode. If an application requires that the keypad be
2399 # in Application Mode then it is expected that the user, or the application,
2400 # will set the TERM environment variable to point to a terminfo entry which has
2401 # defined the <smkx> string to include the codes that switch the keypad into
2402 # Application Mode, and the terminfo entry will also define function key
2403 # fields to match the Application Mode control codes. If the <smkx> string
2404 # is a null string or is not defined, then the keypad is assumed to be in
2405 # Numeric Mode. If the <smkx> string switches the keypad into Application
2406 # Mode, it is expected that the <rmkx> string will contain the control codes
2407 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2408 # applications which transmit the <smkx> string will also always transmit the
2409 # <rmkx> string to the terminal before they exit.
2411 # Here's a diagram of the VT100 keypad keys with their bindings.
2412 # The top line is the name of the key (some DEC keyboards have the keys
2413 # labelled somewhat differently, like GOLD instead of PF1, but this is
2414 # the most "official" name). The second line is the escape sequence it
2415 # generates in Application Keypad mode (where "$" means the ESC
2416 # character). The third line contains two items, first the mapping of
2417 # the key in terminfo, and then in termcap.
2418 # _______________________________________
2419 # | PF1 | PF2 | PF3 | PF4 |
2420 # | $OP | $OQ | $OR | $OS |
2421 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2423 # | $Ow | $Ox | $Oy | $Om |
2424 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2426 # | $Ot | $Ou | $Ov | $Ol |
2427 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2429 # | $Oq | $Or | $Os | enter |
2430 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2433 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2435 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2436 # terminfo guidelines. That is a compromise used to assign the remaining
2437 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2439 vt100+keypad|DEC VT100 numeric keypad no fkeys,
2440 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2441 vt100+pfkeys|DEC VT100 numeric keypad (kf1-kf4),
2442 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2444 vt100+fnkeys|DEC VT100 numeric keypad (kf0-kf10),
2445 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2446 kf9=\EOw, use=vt100+pfkeys,
2448 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2449 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2450 # use the 5-key arrangement to model the arrow keys as suggested in the
2451 # terminfo guidelines:
2452 # _______________________________________
2453 # | PF1 | PF2 | PF3 | PF4 |
2454 # | $OP | $OQ | $OR | $OS |
2455 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2457 # | $Ow | $Ox | $Oy | $Om |
2458 # |_ka1__K1_|_________|_ka3__K3_|_________|
2460 # | $Ot | $Ou | $Ov | $Ol |
2461 # |_________|_kb2__K2_|_________|_________|
2463 # | $Oq | $Or | $Os | enter |
2464 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2467 # |___________________|_________|_kent_@8_|
2469 vt220+keypad|DEC VT220 numeric keypad,
2470 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, ka2=\EOx,
2471 kb1=\EOt, kb3=\EOv, kc2=\EOr, use=vt100+pfkeys,
2473 vt100+enq|ncurses extension for VT100-style ENQ,
2474 u8=\E[?1;2c, use=ansi+enq,
2475 vt102+enq|ncurses extension for VT102-style ENQ,
2476 u8=\E[?6c, use=ansi+enq,
2478 # And here, for those of you with orphaned VT100s lacking documentation, is
2479 # a description of the soft switches invoked when you do `Set Up'.
2481 # Scroll 0-Jump Shifted 3 0-#
2482 # | 1-Smooth | 1-British pound sign
2483 # | Autorepeat 0-Off | Wrap Around 0-Off
2485 # | | Screen 0-Dark Bkg | | New Line 0-Off
2486 # | | | 1-Light Bkg | | | 1-On
2487 # | | | Cursor 0-Underline | | | Interlace 0-Off
2488 # | | | | 1-Block | | | | 1-On
2490 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2492 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2493 # | | | 1-On | | | 1-50 Hz
2494 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2495 # | | 1-ANSI | | 1-8 Bits
2496 # | Keyclick 0-Off | Parity 0-Off
2498 # Margin Bell 0-Off Parity Sense 0-Odd
2501 # The following SET-UP modes are assumed for normal operation:
2502 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2503 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2504 # Other SET-UP modes may be set for operator convenience or communication
2505 # requirements; I recommend
2506 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2507 # Unless you have a graphics add-on such as Digital Engineering's VT640
2508 # (and even then, whenever it can be arranged!) you should set
2511 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2512 vt100|vt100-am|DEC VT100 (w/advanced video),
2515 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2516 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, rmam=\E[?7l,
2517 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2518 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2519 %;m%?%p9%t\016%e\017%;$<2>,
2520 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2521 use=ansi+csr, use=ansi+pp, use=decid+cpr, use=vt100+4bsd,
2524 vt100+4bsd|DEC VT100 from 4.0BSD,
2526 cols#80, it#8, lines#24,
2527 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2528 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2529 clear=\E[H\E[J$<50>, cr=\r, cub1=^H, cud1=\n,
2530 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
2531 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2532 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2533 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2534 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2535 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2536 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2537 %;m%?%p9%t\016%e\017%;$<2>,
2538 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2539 smul=\E[4m$<2>, tbc=\E[3g, use=ansi+local,
2541 vt100nam|vt100-nam|VT100 no automargins,
2543 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2544 vt100-vb|DEC VT100 (w/advanced video) & no beep,
2545 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2547 # Ordinary VT100 in 132 column ("wide") mode.
2548 vt100-w|vt100-w-am|DEC VT100 132 cols (w/advanced video),
2550 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2551 vt100-w-nam|vt100-nam-w|DEC VT100 132 cols (w/advanced video no automargin),
2552 cols#132, lines#14, vt@,
2553 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2555 # VT100 with no advanced video.
2556 vt100-nav|VT100 without advanced video option,
2558 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2560 vt100-nav-w|vt100-w-nav|DEC VT100 132 cols 14 lines (no advanced video option),
2561 cols#132, lines#14, use=vt100-nav,
2563 # VT100 with one of the 24 lines used as a status line.
2564 # We put the status line on the top.
2565 vt100-s|vt100-s-top|vt100-top-s|VT100 for use with top sysline,
2568 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2569 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2570 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2571 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2573 # Status line at bottom.
2574 # Clearing the screen will clobber status line.
2575 vt100-s-bot|vt100-bot-s|VT100 for use with bottom sysline,
2578 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2579 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2581 # Most of the `vt100' emulators out there actually emulate a VT102
2582 # This entry (or vt102-nsgr) is probably the right thing to use for
2585 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2587 vt102-w|DEC VT102 in wide mode,
2589 rs3=\E[?3h, use=vt102,
2591 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2592 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2593 # string in the canonical vt100 entry above leaves the screen littered
2594 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2595 # after highlight turnoffs. This entry should fix that, and even leave
2596 # ACS support working, at the cost of making multiple-highlight changes
2597 # slightly more expensive.
2598 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2599 vt102-nsgr|VT102 no sgr (use if you see snowflakes after highlight changes),
2600 sgr@, sgr0=\E[m, use=vt102,
2602 # VT125 Graphics CRT. Clear screen also erases graphics
2603 # Some VT125's came configured with VT102 support.
2604 vt125|VT125 graphics terminal,
2606 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2608 # This isn't a DEC entry, it came from University of Wisconsin.
2609 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2612 cols#80, it#8, lines#24, vt#3,
2613 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2614 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
2615 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
2616 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
2617 ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
2618 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
2619 kf3=\EOR, kf4=\EOS, nel=\r\n, rev=\E[7m$<2/>, ri=\EM$<5/>,
2620 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2622 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2623 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2624 smso=\E[7m$<2/>, smul=\E[4m$<2/>, use=ansi+csr,
2626 # vt132 - like vt100 but slower and has ins/del line and such.
2627 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2628 # manual and from the ANSI standard, this describes the actual
2629 # terminal. I've never actually used a vt132 myself, so this
2634 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2635 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2637 # This vt220 description maps F5--F9 to the second block of function keys
2638 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2639 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2640 # PF1--PF4 are used as F1--F4.
2643 vt220-old|vt200-old|DEC VT220 in VT100 emulation mode,
2644 OTbs, OTpt, am, mir, msgr, xenl, xon,
2645 cols#80, lines#24, vt#3,
2647 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2648 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2649 clear=\E[H\E[2J$<50>, cr=\r, cub1=^H,
2650 cup=\E[%i%p1%d;%p2%dH$<10>, dch1=\E[P, ed=\E[J$<50>,
2651 el=\E[K$<3>, home=\E[H, ht=^I,
2652 if=/usr/share/tabset/vt100, ind=\ED$<20/>,
2653 is2=\E[1;24r\E[24;1H, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
2654 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
2655 kf8=\E[20~, kf9=\E[21~, khome=\E[1~, kich1=\E[2~,
2656 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2657 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2658 rmso=\E[27m, rmul=\E[24m,
2659 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2660 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2661 %p9%t\E(0%e\E(B%;$<2>,
2662 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2663 smso=\E[7m, smul=\E[4m, use=ansi+arrows, use=ansi+csr,
2664 use=ansi+idl1, use=ansi+local1, use=vt220+pcedit,
2667 # Here's a picture of the Sun/PC editing keypad:
2668 # +--------+--------+--------+
2669 # | Insert | Home | PageUp |
2670 # +--------+--------+--------+
2671 # | Delete | End | PageDn |
2672 # +--------+--------+--------+
2674 # VT220 emulators such as xterm, using PC-keyboards use a different layout than
2675 # the VT220 keyboard:
2684 vt220+pcedit|editing-keypad for VT220 using PC keyboard,
2685 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
2686 knp=\E[6~, kpp=\E[5~,
2687 vt220+vtedit|editing-keypad for VT220 using DEC keyboard,
2688 kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2691 # A much better description of the VT200/220; used to be vt220-8
2692 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2693 # designation to accommodate bug in pcvt -TD
2695 # Here's a picture of the VT220 editing keypad:
2696 # +--------+--------+--------+
2697 # | Find | Insert | Remove |
2698 # +--------+--------+--------+
2699 # | Select | Prev | Next |
2700 # +--------+--------+--------+
2702 # Still, this is a "base" entry. Software emulators commonly leave out the
2703 # DECTCEM feature -TD
2704 vt220-base|DEC VT220 as emulated,
2705 OTbs, am, mir, msgr, xenl, xon,
2706 cols#80, it#8, lines#24, vt#3,
2707 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2708 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
2709 dch=\E[%p1%dP, dch1=\E[P, ech=\E[%p1%dX, el1=\E[1K,
2710 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, ht=^I, hts=\EH,
2711 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, ind=\ED,
2712 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2713 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2714 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2715 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2716 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2717 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, lf1=pf1,
2718 lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, rev=\E[7m, ri=\EM,
2719 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2720 rmul=\E[24m, rs1=\E[?3l,
2721 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2722 %p9%t\E(0%e\E(B%;$<2>,
2723 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2724 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+csr,
2725 use=ansi+cup, use=ansi+pp, use=ansi+enq, use=ansi+erase,
2726 use=ansi+idl, use=ansi+local, use=vt220+vtedit,
2728 vt220|vt200|DEC VT220,
2729 use=vt220+cvis, use=vt220-base,
2730 vt220-w|vt200-w|DEC VT220 in wide mode,
2732 rs3=\E[?3h, use=vt220,
2733 vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode,
2734 OTbs, am, mc5i, mir, msgr, xenl, xon,
2735 cols#80, it#8, lines#24, vt#3,
2736 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2737 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2738 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2739 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2740 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2741 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2742 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2743 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2744 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2745 il=\233%p1%dL, il1=\233L, ind=\ED,
2746 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2747 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2748 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2749 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2750 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2751 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2752 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2753 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2754 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2755 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2756 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2757 rmul=\23324m, rs1=\233?3l, sc=\E7,
2758 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2759 %?%p9%t\E(0%e\E(B%;$<2>,
2760 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2761 smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
2764 # This VT220 description regards F6--F10 as the second block of function keys
2765 # at the top of the keyboard. This mapping follows the description given
2766 # in the VT220 Programmer Reference Manual and agrees with the labeling
2767 # on some terminals that emulate the VT220. There is no support for an F5.
2768 # See vt220 for an alternate mapping.
2770 vt220d|DEC VT220 in VT100 mode with DEC function key labeling,
2771 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2772 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2773 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2774 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2776 vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins,
2778 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2780 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2781 # (not an official DEC entry!)
2782 # The problem with real VT220 terminals is they don't send escapes when in
2783 # in VT220 mode. This can be gotten around two ways. 1> don't send
2784 # escapes or 2> put the VT220 into VT100 mode and use all the nifty
2785 # features of VT100 advanced video which it then has.
2787 # This entry takes the view of putting a VT220 into VT100 mode so
2788 # you can use the escape key in emacs and everything else which needs it.
2790 # You probably don't want to use this on a VMS machine since VMS will think
2791 # it has a VT220 and will get fouled up coming out of emacs
2793 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2794 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2796 vt200-js|vt220-js|DEC VT200 series with jump scroll,
2799 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
2800 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
2801 home=\E[H, ht=^I, il1=\E[L, ind=\ED,
2802 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2804 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2805 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED,
2806 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2807 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2808 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smdc=,
2809 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2810 use=ansi+csr, use=ansi+erase, use=vt220+cvis,
2812 # This was DEC's VT320. Use the purpose-built one below instead
2813 #vt320|DEC VT320 in VT100 emulation mode,
2816 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2818 vt320nam|v320n|DEC VT320 in VT100 emul. mode with NO AUTO WRAP mode,
2820 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
2823 # These entries are not DEC's official ones, they were purpose-built for the
2824 # VT320. Here are the designer's notes:
2825 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2826 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2827 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2828 # Things that use <knxt> usually use tab anyways... and things that don't use
2829 # tab usually use <knxt> instead...
2830 # kprv is same as tab - Backtab is useless...
2831 # I left out <sgr> because of its RIDICULOUS complexity,
2832 # and the resulting fact that it causes the termcap translation of the entry
2833 # to SMASH the 1k-barrier...
2834 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2835 # (vt320: uncommented <fsl> --esr)
2836 vt320|vt300|DEC VT320 7 bit terminal,
2837 am, mir, msgr, xenl,
2838 cols#80, lines#24, wsl#80,
2839 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2840 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
2841 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
2842 dch1=\E[P, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2843 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ind=\ED,
2844 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2845 kbs=^?, kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2846 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2847 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2848 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2849 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2850 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rev=\E[7m,
2851 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2852 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2854 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2855 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2856 %p9%t\E(0%e\E(B%;$<2>,
2857 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2858 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2859 use=ansi+apparrows, use=ansi+csr, use=ansi+enq,
2860 use=ansi+idl, use=ansi+local, use=dec+pp, use=vt220+cvis,
2861 use=vt220+keypad, use=dec+sl,
2863 vt320-nam|vt300-nam|DEC VT320 7 bit terminal with no am to make SAS happy,
2865 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2866 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2867 # We have to init 132-col mode, not 80-col mode.
2868 vt320-w|vt300-w|DEC VT320 wide 7 bit terminal,
2870 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2871 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2872 vt320-w-nam|vt300-w-nam|DEC VT320 wide 7 bit terminal with no am,
2874 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2875 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2877 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2878 # which are pretty much a superset of the VT320. They have the
2879 # host writable status line, yet another different DRCS matrix size,
2880 # and such, but they add the DEC Technical character set, Multiple text
2881 # pages, selectable length pages, and the like. The difference between
2882 # the VT330 and VT340 is that the former has only 2 planes and a monochrome
2883 # monitor, the latter has 4 planes and a color monitor. These terminals
2884 # support VT131 and ANSI block mode, but as with much of these things,
2885 # termcap/terminfo doesn't deal with these features.
2887 # Note that this entry is are set up in what was the standard way for GNU
2888 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2889 # keys were switched into application mode at the same time the numeric pad
2890 # is switched into application mode. This changes the definitions of the
2891 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2892 # your termcap or terminfo entry,
2894 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2895 # (vt340: string capability "sb=\E[M" corrected to "sr";
2896 # also, added <rmam>/<smam> based on the init string -- esr)
2897 vt340|dec-vt340|vt330|dec-vt330|DEC VT340 graphics terminal with 24 line page,
2898 am, eslok, hs, mir, msgr, xenl, xon,
2899 cols#80, it#8, lines#24, vt#3,
2900 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2901 blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
2902 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
2903 dsl=\E[2$~\r\E[1$}\E[K\E[$},
2904 flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
2905 hts=\EH, ich=\E[%p1%d@, ind=\ED,
2906 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2908 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2909 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2910 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2911 lf3=pf3, lf4=pf4, nel=\r\ED, rev=\E[7m,
2912 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2913 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2914 rmul=\E[24m, rs1=\E[?3l,
2915 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2916 %p9%t\E(0%e\E(B%;$<2>,
2917 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2918 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2919 tsl=\E[2$~\E[1$}\E[1;%dH, use=ansi+csr, use=ansi+erase,
2920 use=ansi+idl, use=ansi+local, use=vt220+cvis,
2922 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
2923 vt420+lrmm|VT420 left/right margins,
2924 mgc=\E[?69l, smglp=\E[?69h\E[%i%p1%ds,
2925 smglr=\E[?69h\E[%i%p1%d;%p2%ds,
2926 smgrp=\E[?69h\E[%i;%p1%ds,
2928 # DEC doesn't supply a VT400 description, so we add Daniel Glasser's
2929 # (originally written with VT420 as its primary name, and usable for it).
2931 # VT400/420 -- This terminal is a superset of the VT320. It adds the multiple
2932 # text pages and long text pages with selectable length of the VT340, along
2933 # with left and right margins, rectangular area text copy, fill, and erase
2934 # operations, selected region character attribute change operations,
2935 # page memory and rectangle checksums, insert/delete column, reception
2936 # macros, and other features too numerous to remember right now. TERMCAP
2937 # can only take advantage of a few of these added features.
2939 # Note that this entry is set up in what was the standard way for GNU
2940 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2941 # keys were switched into application mode at the same time the numeric pad
2942 # is switched into application mode. This changes the definitions of the
2943 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2944 # your termcap entry,
2946 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2947 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2948 # also, added <rmam>/<smam> based on the init string -- esr)
2949 vt400|vt400-24|dec-vt400|DEC VT400 24x80 column autowrap,
2950 am, eslok, mir, msgr, xenl, xon,
2951 cols#80, it#8, lines#24, vt#3,
2952 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2953 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r,
2954 cub1=^H, cud1=\n, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2955 ed=\E[J$<10/>, el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l,
2956 fsl=\E[$}, ht=^I, hts=\EH, ind=\ED,
2957 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2959 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2960 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2961 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2962 lf3=pf3, lf4=pf4, nel=\r\ED, rev=\E[7m,
2963 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2964 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2965 rs1=\E<\E[?3l\E[!p\E[?7h,
2966 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2967 %p9%t\E(0%e\E(B%;$<2>,
2968 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
2969 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2970 tsl=\E[2$~\E[1$}\E[1;%dH, use=ansi+csr, use=ansi+cup,
2971 use=ansi+idc, use=ansi+idl, use=ansi+local, use=dec+sl,
2974 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2975 # a missing <sc> -- esr)
2976 # add msgr and other capabilities from vt220 -TD
2978 am, mir, msgr, xenl, xon,
2979 cols#80, it#8, lines#24, vt#3,
2980 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2981 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2982 clear=\E[H\E[2J$<50>, cr=\r, cub1=^H, cud1=\n,
2983 cup=\E[%i%p1%d;%p2%dH$<10>, dch=\E[%p1%dP, dch1=\E[P,
2984 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2985 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2986 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2987 ind=\ED, is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p,
2988 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2989 kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2990 kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2991 nel=\EE, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2992 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2993 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2994 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p,
2995 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2996 %p9%t\E(0%e\E(B%;$<2>,
2997 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2998 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2999 use=ansi+csr, use=ansi+enq, use=ansi+idl, use=ansi+pp,
3000 use=ansi+local, use=dec+sl, use=vt220+cvis,
3001 use=vt420+lrmm, use=vt220+vtedit,
3003 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3004 # takes two parameters, the key and the string. Translating the key is
3005 # straightforward (keys 1-5 are not defined on real terminals, though some
3006 # emulators define these):
3008 # if (key < 16) then value = key;
3009 # else if (key < 21) then value = key + 1;
3010 # else if (key < 25) then value = key + 2;
3011 # else if (key < 27) then value = key + 3;
3012 # else if (key < 30) then value = key + 4;
3013 # else value = key + 5;
3015 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3016 # There's no provision in terminfo for emitting a string in this format, so the
3017 # application has to know it.
3019 vt420pc|DEC VT420 w/PC keyboard,
3020 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3021 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3022 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3023 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3024 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3025 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3026 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3027 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3028 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3029 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3030 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3031 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3032 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3033 pctrm=USR_TERM:vt420pcdos:,
3034 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3035 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3039 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3041 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3042 %{127}%=%t\E\177%e%p1%c%;,
3044 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3045 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3047 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3048 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3049 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3050 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3051 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3052 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3053 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3058 vt510pc|DEC VT510 w/PC keyboard,
3060 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3065 # The VT520 is a monochrome text terminal capable of managing up to
3066 # four independent sessions in the terminal. It has multiple ANSI
3067 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3068 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3069 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3071 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3072 # [Alt]/[Print Screen] depending upon which keyboard and which
3073 # terminal mode is being used. If Set-Up has been disabled or
3074 # assigned to an unknown key, Set-Up may be entered by pressing
3075 # [F3] as the first key after power up, regardless of keyboard type.
3077 use=ansi+rca, use=vt420, use=ansi+tabs,
3082 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3083 # Keyboard, which replaces the old LK41R-AA keyboard.
3085 # In trying to get the function keys to work, I had to cobble my own
3086 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3087 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3088 # I seem to get them all -Mike Gran
3089 vt520ansi|Boundless VT520 ANSI,
3090 use=ansi+rca, use=vt420f, use=vt220+keypad,
3093 #### VT100 emulations
3095 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3096 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3097 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3098 # that this works best with a stock vt100 entry.
3099 dec-vt100|EWAN telnet's vt100 emulation,
3102 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3103 dec-vt220|DOS tnvt200 terminal emulator,
3106 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3107 # anyone who needs PC VT340 emulation. (or anything below that level, for
3108 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3109 # RDBM systems, it includes ReGIS and Sixel support! I'm impressed...
3110 # I can send the address if requested.
3111 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3112 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3113 z340|ZSTEM VT340 terminal emulator 132col 42line,
3115 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3116 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3117 z340-nam|ZSTEM VT340 terminal emulator 132col 42line (no automatic margins),
3119 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3120 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3122 # expect-5.44.1.15/example/tkterm
3123 # a minimal subset of a VT100 (compare with "news-unk).
3125 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3126 tt|tkterm|Don Libes' tk text widget terminal emulator,
3127 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3128 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3129 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3130 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3137 # nsterm*|Apple_Terminal - AppKit Terminal.app
3139 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
3140 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
3141 # Server and Mac OS X operating systems. There is also a
3142 # "terminal.app" in GNUstep, but I believe it to be an unrelated
3143 # codebase and I have not attempted to describe it here.
3145 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
3146 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
3147 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
3148 # version supports color.
3150 # To determine the version of Terminal.app you're using by running:
3152 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
3154 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
3156 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
3158 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
3160 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3162 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3164 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3165 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3166 # might work too, but really you're on your own here since these
3167 # systems are very obsolete and I can't test them. I do welcome
3168 # patches, though :).
3172 # For GNUstep_Terminal, you're probably best off using "linux" or
3173 # writing your own terminfo.
3175 # For MacTelnet, you're on your own. It's a different codebase, and
3176 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3178 # For iTerm.app, see "iterm".
3181 # The AppKit Terminal.app descriptions all have names beginning with
3182 # "nsterm". Note that the statusline (-s) versions use the window
3183 # titlebar as a phony status line, and may produce warnings during
3184 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3185 # Ignore these warnings, or even ignore these entries entirely. Apps
3186 # which need to position the cursor or do other fancy stuff inside the
3187 # status line won't work with these entries. They're primarily useful
3188 # for programs like Pine which provide simple notifications in the
3189 # status line. Please note that non-ASCII characters don't work right
3190 # in the status line, since Terminal.app incorrectly interprets their
3191 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3192 # versions) or only accepts status lines consisting entirely of
3193 # characters from the first 256 Unicode positions (including C1 but
3196 # The Mythology* of AppKit Terminal.app:
3198 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3199 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3200 # shareware replacement for Terminal called "Stuart" which NeXT bought
3201 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3202 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3203 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3204 # capabilities for the early versions, but I believe that the
3205 # TERM_PROGRAM_VERSION may have been reset at some point.
3207 # The early versions were tailored to the NeXT character set. Sometime
3208 # after the Apple acquisition the encoding was switched to MacRoman
3209 # (initially with serious altcharset bugs due to incomplete conversion
3210 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3211 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3212 # 8-color support (initially buggy when combined with attributes, but
3213 # that was later fixed.) More recently, around Mac OS X version 10.3
3214 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3215 # some versions (for instance 133-1 which shipped with Mac OS X
3216 # version 10.4) this suffered from the <bce> bug, but that seems to
3217 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3219 # In the early days of Mac OS X the terminal was fairly buggy and
3220 # would routinely crash under load. Many of these bugs seem to have
3221 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3222 # some may still remain. This change seems to correspond to
3223 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3224 # it did previously.
3226 # * This may correspond with what actually happened, but I don't
3227 # know. It is based on guesswork, hearsay, private correspondence,
3228 # my faulty memory, and the following online sources and references:
3230 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3231 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3233 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3234 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3236 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3237 # "nsterm" to comply with the name length and case conventions and
3238 # limitations of various software packages [notably Solaris terminfo
3239 # and UNIX.] A single Apple_Terminal alias is retained for
3240 # backwards-compatibility.
3242 # * Added function key support (F1-F4). These only work in Terminal.app
3243 # version 51, hopefully the capabilities won't cause problems for people
3246 # * Added "full color" (-c) entries which support the 16-color mode in
3249 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3250 # support, so "ASCII" (-7) entries without altcharset support were
3253 # nsterm - AppKit Terminal.app
3255 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3256 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3257 # extensions. This terminfo was written to describe versions 41
3258 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3259 # version 10.1) of Terminal.app.
3261 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3262 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3263 # use, the executable for Terminal.app is:
3264 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3266 # If you're looking for a description of the full-screen system
3267 # console which runs under Apple's Darwin operating system on PowerPC
3268 # platforms, see the "xnuppc" entry instead.
3270 # There were no function keys in version 41. In version 51, there are
3271 # four working function keys (F1, F2, F3 and F4.) The function keys
3272 # are included in all of these entries.
3274 # It does not support mouse pointer position reporting. Under some
3275 # circumstances the cursor can be positioned using option-click; this
3276 # works by comparing the cursor position and the selected position,
3277 # and simulating enough cursor-key presses to move the cursor to the
3278 # selected position. This technique fails in all but the simplest
3281 # It provides partial ANSI color support (background colors interacted
3282 # badly with bold in version 41, though, as reflected in :ncv:.) The
3283 # monochrome (-m) entries are useful if you've disabled color support
3284 # or use a monochrome monitor. The full color (-c) entries are useful
3285 # in version 51, which doesn't exhibit the background color bug. They
3286 # also enable an xterm-compatible 16-color mode.
3288 # The configurable titlebar is set using xterm-compatible sequences;
3289 # it is used as a status bar in the statusline (-s) entries. Its width
3290 # depends on font sizes and window sizes, but 50 characters seems to
3291 # be the default for an 80x24 window.
3293 # The MacRoman character encoding is used for some of the alternate
3294 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3295 # disable alternate character set support entirely, and the "VT100"
3296 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3297 # graphics emulation, which seems to think the character encoding is
3298 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3299 # are useful in Terminal.app version 51, which supports UTF-8 and
3300 # other ASCII-compatible character encodings but does not correctly
3301 # implement VT100 graphics; once VT100 graphics are correctly
3302 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3303 # usable in any ASCII-compatible character encoding [except perhaps
3304 # in UTF-8, where some experts argue for disallowing alternate
3305 # characters entirely.]
3307 # Terminal.app reports "vt100" as the terminal type, but exports
3308 # several environment variables which may aid detection in a shell
3309 # profile (i.e. .profile or .login):
3312 # TERM_PROGRAM=Apple_Terminal
3313 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3314 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3316 # For example, the following Bourne shell script would detect the
3317 # correct terminal type:
3319 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3322 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3330 # In a C shell derivative, this would be accomplished by:
3332 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3333 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3334 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3335 # setenv TERM "nsterm-old"
3337 # setenv TERM "nsterm-c-7"
3342 # The '+' entries are building blocks
3343 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3344 am, bw, msgr, xenl, xon,
3345 cols#80, it#8, lines#24,
3346 bel=^G, cr=\r, cub1=^H, cud1=\n, dim=\E[2m, el1=\E[1K, ht=^I,
3347 hts=\EH, ind=\n, kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3348 kcuu1=\EOA, kent=\EOM, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>,
3349 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3350 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3351 %p5%t;2%;%?%p7%t;8%;m,
3352 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, tbc=\E[3g,
3353 use=ansi+csr, use=ansi+cup, use=ansi+erase, use=ansi+idl,
3354 use=ansi+local, use=ansi+sgrbold, use=vt100+enq,
3357 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3358 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3359 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3360 sgr0=\E[m\017, use=nsterm+7, use=vt100+4bsd,
3362 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3363 acsc=+\335\,\334-\366.\3770#`\327a:f\241g\261h#i
3364 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3365 \271|\255}\243~\245,
3366 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3367 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3368 sgr0=\E[m\017, use=nsterm+7, use=vt100+4bsd,
3370 # compare with xterm+sl-twm
3371 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3372 wsl#50, use=xterm+sl-twm,
3374 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3375 op=\E[0m, use=ibm+16color,
3377 nsterm+c41|AppKit Terminal.app v41 color support,
3379 op=\E[0m, use=klone+color,
3381 # These are different combinations of the building blocks
3383 # ASCII charset (-7)
3384 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3387 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3388 use=nsterm+s, use=nsterm+7,
3390 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3391 use=nsterm+c41, use=nsterm+7,
3393 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3394 use=nsterm+c, use=nsterm+7,
3396 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3397 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3399 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3400 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3402 # VT100 alternate-charset (-acs)
3403 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3406 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3407 use=nsterm+s, use=nsterm+acs,
3409 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3410 use=nsterm+c41, use=nsterm+acs,
3412 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3413 use=nsterm+c, use=nsterm+acs,
3415 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3416 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3418 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3419 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3422 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3425 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3426 use=nsterm+s, use=nsterm+mac,
3428 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3429 use=nsterm+c41, use=nsterm+mac,
3431 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3432 use=nsterm+c, use=nsterm+mac,
3434 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3435 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3437 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3438 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3440 # In Mac OS X version 10.5 the format of the preferences has changed
3441 # and a new, more complex technique is needed, e.g.,
3443 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3444 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3445 # ud.init();prefs=ud.persistentDomainForName_(
3446 # "com.apple.Terminal");prefs["Window Settings"][
3447 # prefs["Default Window Settings"]]["TerminalType"
3448 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3449 # "com.apple.Terminal")' nsterm-16color
3451 # and it is still not settable from the preferences dialog. This is
3452 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3453 # in Apple's bug reporter.
3455 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3456 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3457 # vt52, vt100, vt102 and xterm.
3458 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3460 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
3461 kdch1=\E[3~, kend=\E[F, kf10=\E[21~, kf11=\E[23~,
3462 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3463 kf16=\E[29~, kf17=\E[31~, kf18=\E[22~, kf19=\E[33~,
3464 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3465 kf8=\E[19~, kf9=\E[20~, khome=\E[H, knp=\E[6~, kpp=\E[5~,
3466 vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C, use=ansi+idc,
3467 use=xterm+alt47, use=nsterm-c-s-acs, use=vt220+cvis,
3469 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3470 # the background color erase feature. The newer version 240.2 in Mac OS X
3471 # version 10.5 does not.
3473 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3474 # and D P Schreber comparing to nsterm-c-s-acs.
3476 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3477 # can be set in Terminal.app, e.g.,
3479 # defaults write com.apple.Terminal TermCapString nsterm-bce
3481 # and that it is not set in Terminal's preferences dialog.
3483 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3486 # * The terminal description matches the default settings.
3487 # * The keyboard is configurable via a dialog.
3488 # * By default khome, kend, knext and kprev are honored only with a
3490 # * There are bindings for control left/right arrow (but not up/down).
3491 # Added those to nsterm-16color, which is the version used for OS X 10.6
3492 # * "Allow VT100 application keypage mode" is by default disabled.
3493 # There is no way to press keypad-comma unless application mode is enabled
3495 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3496 # * CHT, REP, SU, SD are buggy.
3497 # * ECH works (also in Leopard), but is not used here for compatibility.
3498 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3499 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3500 # nsterm entry from this file to override the MacPorts (20110404) or
3501 # system (20081102) copy of this file.
3502 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3503 # dialog defaults to xterm-256color. Alternative selections are ansi,
3504 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3505 # the menu says "Declare terminal as" without promising to actually emulate
3506 # the corresponding terminals. Indeed, changing TERM does not affect the
3507 # emulation itself. This means that
3508 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3510 # + the color model is the same for each setting of TERM (does not match
3512 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3513 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3514 # + the VT52 emulation does not give a usable shell because screen-clearing
3515 # does not work as expected.
3516 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3517 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3518 # as well as unmasking F10 (which had been used in the window manager). Those
3519 # keys are listed in this entry.
3520 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3521 bce, use=nsterm-16color,
3523 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3524 # TERM_PROGRAM_VERSION=309
3525 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3526 # TERM_PROGRAM_VERSION=303
3527 nsterm-build309|Terminal.app in OS X 10.8,
3528 use=xterm+256setaf, use=nsterm-bce,
3530 # removed bogus kDC7 -TD
3531 nsterm-build326|Terminal.app in OS X 10.9,
3532 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3533 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3534 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3537 nsterm-build343|Terminal.app in OS X 10.10,
3538 kend=\EOF, khome=\EOH, use=nsterm-build326,
3540 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3542 # + no VT52 mode for cursor keys, though VT52 screen works in vttest
3543 # + f1-f4 map to pf1-pf4
3544 # + no VT220 support aside from DECTCEM and ECH
3545 # + there are no protected areas. Forget about anything above VT220.
3546 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3547 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3548 # + but bce fails for 11.6.7.2 (test repeat).
3549 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3550 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3551 # + normal (not X10 or Highlight tracking) mouse now works.
3552 # + mouse any-event works
3553 # + mouse button-event works
3554 # + in alternate screen:
3556 # mode 1047 fails to restore cursor position (do not use)
3557 # mode 1049 fails to restore screen contents (do not use)
3558 # + dtterm window-modify operations work (some messages are not printed)
3559 # + dtterm window-report gives size of window in characters/pixels as
3560 # well as state of window.
3562 # + there is no difference between cnorm/cvvis
3563 # + has dim/invis/blink (no protect of course)
3564 # + most function keys with shift/control modifiers give beep
3565 # (user can configure, but out-of-the-box is what I record)
3566 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3568 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3569 # + kLFT/kRIT work, but not up/down with shift-modifier
3570 # + there are a few predefined bindings with Alt, but no clear pattern.
3571 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3572 # Using ncurses test-program with xterm-new:
3574 # Using xterm's scripts:
3575 # + palette for 256-colors is hardcoded.
3576 # + no support for "dynamic colors"
3577 # + no support for tcap-query.
3578 nsterm-build361|Terminal.app in OS X 10.11,
3580 kmous=\E[M, use=nsterm-build343,
3582 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3583 # Comparing with build361, little has changed, except that italics work.
3584 # Direct-color is not supported, by the way.
3586 # Improved rmso/rmul -TD
3587 nsterm-build400|Terminal.app in OS X 10.13,
3588 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3589 use=ecma+italics, use=nsterm-build361,
3591 nsterm-build440|Terminal.app in MacOS 11.6.8,
3592 use=xterm+alt1049, use=nsterm-build400,
3594 # This is an alias which should always point to the "current" version
3595 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3596 use=nsterm-build440,
3602 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3603 # featureful) terminal emulator for Mac OS X. It is similar enough in
3604 # capabilities to nsterm-16color that I have derived this description from that
3605 # one, but as far as I know they share no code. Many of the features are
3606 # user-configurable, but I attempt only to describe the default configuration
3609 # According to its documentation, iTerm uses terminfo to obtain function key
3610 # definitions. For example, if it is started with TERM=xterm, it uses key
3611 # definitions from that terminal description from the local OSX machine. Those
3612 # $TERM settings may be augmented using the bookmark and profile dialogs.
3613 # However, the behavior seen with tack does not agree with either the terminfo
3614 # description or the function keys in its "xterm" profile.
3618 # reports primary DA as VT100 with AVO: \E[?1;2c
3619 # reports secondary DA as "\E[>0;95;c"
3620 # supports blink and underline
3621 # displays bold text as red
3622 # recognizes all dtterm controls for modifying/querying window
3623 # resizing via escape sequence is very slow
3624 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3625 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3626 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3629 # with ncurses test-program:
3630 # ncurses 'k' has problem in second screen; light background does not fill
3631 # with xterm scripts
3632 # can display/alter xterm-256color cube
3633 # can display/alter xterm-88color cube
3634 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3635 bce, mir, npc, xenl, xon,
3637 blink=\E[5m, bold=\E[1m, cub1=^H, cud1=\n,
3638 cup=\E[%i%p1%d;%p2%dH, el1=\E[1K,
3639 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
3640 kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?, kcbt=\E[Z, kdch1=\E[3~,
3641 kend=\EOF, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3642 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3643 knp=\E[6~, kpp=\E[5~, op=\E[0m, rev=\E[7m, ri=\EM,
3644 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3645 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3647 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3648 smul=\E[4m, vpa=\E[%i%p1%dd, kEND5=\E[1;5F,
3649 kHOM5=\E[1;5H, use=ansi+apparrows, use=ansi+csr,
3650 use=ansi+enq, use=ansi+erase, use=ansi+idc, use=ansi+idl,
3651 use=ansi+local, use=vt100+4bsd, use=vt100+keypad,
3652 use=vt100+pfkeys, use=xterm+alt47, use=xterm+sl-twm,
3653 use=xterm+x11mouse, use=xterm+256setaf, use=vt220+cvis,
3657 # https://iterm2.com/
3658 # https://github.com/gnachman/iTerm2
3659 # ~/Library/Preferences/com.googlecode.iterm2.plist
3660 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3664 # reports primary DA as VT100 with AVO: \E[?1;2c
3665 # reports secondary DA as "\E[>0;95;0c"
3666 # numeric keypad application mode does not work
3667 # by default, dtterm window-modifications are ignored
3668 # by default, dtterm window-reports return, but icon as "L", window as "l"
3669 # supports SD/SU, no REP, SL, SR
3670 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3671 # no improvement to XFree86 1047/1048 modes
3673 # in meta-mode, imitates xterm, sending UTF-8
3674 # special-key modifiers based on xterm use incompatible default for alt/meta
3675 # with ncurses test-program:
3677 # no improvement to ncurses 'k'
3678 # with xterm scripts:
3681 # Italic text did not work initially, apparently because upgrading did not
3682 # add/change that preference (set in Preferences, Profiles, Text). A new
3683 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3684 # option in the preferences dialog).
3686 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3687 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3688 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3689 cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@,
3690 kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P, kf14=\E[1;2Q,
3691 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
3692 kf19=\E[18;2~, kf20=\E[19;2~, kf21=\E[20;2~,
3693 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
3694 kind=\E[1;2B, kri=\E[1;2A, nel=\EE, op=\E[39;49m,
3695 rmso=\E[27m, rmul=\E[24m,
3696 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3697 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3698 %p5%t;2%;m%?%p9%t\016%e\017%;,
3699 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3700 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3701 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3702 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3703 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3704 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3705 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3706 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3707 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3708 use=xterm+alt+title, use=ecma+italics, use=iterm,
3709 use=bracketed+paste,
3711 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3713 # On PowerPC platforms, Apple's Darwin operating system uses a
3714 # full-screen system console derived from a NetBSD framebuffer
3715 # console. It is an ANSI-style terminal, and is not really VT-100
3718 # Under Mac OS X, this is the system console driver used while in
3719 # single-user mode [reachable by holding down Command-S during the
3720 # boot process] and when logged in using console mode [reachable by
3721 # typing ">console" at the graphical login prompt.]
3723 # If you're looking for a description of the Terminal.app terminal
3724 # emulator which runs under the Mac OS X Quartz windowing system (and
3725 # other AppKit-supported windowing systems,) see the "nsterm"
3728 # NOTE: Under Mac OS X version 10.1, the default login window does not
3729 # prompt for user name, instead requiring an icon to be selected from
3730 # a list of known users. Since the special ">console" login is not in
3731 # this list, you must make one of two changes in the Login Window
3732 # panel of the Login section of System Prefs to make the special
3733 # ">console" login accessible. The first option is to enable 'Show
3734 # "Other User" in list for network users', which will add a special
3735 # "Other..." icon to the graphical login panel. Selecting "Other..."
3736 # will present the regular graphical login prompt. The second option
3737 # is to change the 'Display Login Window as:' setting to 'Name and
3738 # password entry fields', which replaces the login panel with a
3739 # graphical login prompt.
3741 # There are no function keys, at least not in Darwin 1.3.
3743 # It has no mouse support.
3745 # It has full ANSI color support, and color combines correctly with
3746 # all three supported attributes: bold, inverse-video and underline.
3747 # However, bold colored text is almost unreadable (bolding is
3748 # accomplished using shifting and or-ing, and looks smeared) so bold
3749 # has been excluded from the list of color-compatible attributes
3750 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3751 # monochrome monitor.
3753 # There is one serious bug with this terminal emulation's color
3754 # support: repositioning the cursor onto a cell with non-matching
3755 # colors obliterates that cell's contents, replacing it with a blank
3756 # and displaying a colored cursor in the "current" colors. There is
3757 # no complete workaround at present [other than using the monochrome
3758 # (-m) entries,] but removing the (msgr) capability seemed to help.
3760 # The "standout" chosen was simple reverse-video, although a colorful
3761 # standout might be more aesthetically pleasing. Similarly, the bold
3762 # chosen is the terminal's own smeared bold, although a simple
3763 # color-change might be more readable. The color-bold (-b) entries
3764 # uses magenta colored text for bolding instead. The fancy color (-f
3765 # and -f2) entries use color for bold, standout and underlined text
3766 # (underlined text is still underlined, though.)
3768 # Apparently the terminal emulator does support a VT-100-style
3769 # alternate character set, but all the alternate character set
3770 # positions have been left blank in the font. For this reason, no
3771 # alternate character set capabilities have been included in this
3772 # description. The console driver appears to be ASCII-only, so (enacs)
3773 # has been excluded [although the VT-100 sequence does work.]
3775 # The default Mac OS X and Darwin installation reports "vt100" as the
3776 # terminal type, and exports no helpful environment variables. To fix
3777 # this, change the "console" entry in /etc/ttys from "vt100" to
3778 # "xnuppc-WxH", where W and H are the character dimensions of your
3779 # console (see below.)
3781 # The font used by the terminal emulator is apparently one originally
3782 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3783 # file includes descriptions for the following geometries:
3785 # Pixels Characters Entry Name (append -m for monochrome)
3786 # -------------------------------------------------------------------
3787 # 640x400 80x25 xnuppc-80x25
3788 # 640x480 80x30 xnuppc-80x30
3789 # 720x480 90x30 xnuppc-90x30
3790 # 800x600 100x37 xnuppc-100x37
3791 # 896x600 112x37 xnuppc-112x37
3792 # 1024x640 128x40 xnuppc-128x40
3793 # 1024x768 128x48 xnuppc-128x48
3794 # 1152x768 144x48 xnuppc-144x48
3795 # 1280x1024 160x64 xnuppc-160x64
3796 # 1600x1024 200x64 xnuppc-200x64
3797 # 1600x1200 200x75 xnuppc-200x75
3798 # 2048x1536 256x96 xnuppc-256x96
3800 # The basic "xnuppc" entry includes no size information, and the
3801 # emulator includes no reporting capability, so you'll be at the mercy
3802 # of the TTY device (which reports incorrectly on my hardware.) The
3803 # color-bold entries do not include size information.
3805 # The '+' entries are building blocks
3806 xnuppc+basic|Darwin PowerPC console basic capabilities,
3807 am, bce, mir, xenl, NQ,
3809 bold=\E[1m, cr=\r, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3810 dsl=\E]2;\007, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n,
3811 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3812 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>,
3813 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3814 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3815 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, tbc=\E[3g,
3816 use=ansi+csr, use=ansi+erase, use=ansi+local,
3817 use=ansi+sgrso, use=ansi+sgrul, use=vt100+keypad,
3819 xnuppc+c|Darwin PowerPC console ANSI color support,
3820 ncv#32, use=klone+color,
3822 xnuppc+b|Darwin PowerPC console color-bold support,
3825 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3828 xnuppc+f|Darwin PowerPC console fancy color support,
3830 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3832 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3834 xnuppc+f2|Darwin PowerPC console alternate fancy color support,
3837 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3838 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3840 # Building blocks for specific screen sizes
3841 xnuppc+80x25|Darwin PowerPC console 80x25 support (640x400 pixels),
3844 xnuppc+80x30|Darwin PowerPC console 80x30 support (640x480 pixels),
3847 xnuppc+90x30|Darwin PowerPC console 90x30 support (720x480 pixels),
3850 xnuppc+100x37|Darwin PowerPC console 100x37 support (800x600 pixels),
3853 xnuppc+112x37|Darwin PowerPC console 112x37 support (896x600 pixels),
3856 xnuppc+128x40|Darwin PowerPC console 128x40 support (1024x640 pixels),
3859 xnuppc+128x48|Darwin PowerPC console 128x48 support (1024x768 pixels),
3862 xnuppc+144x48|Darwin PowerPC console 144x48 support (1152x768 pixels),
3865 xnuppc+160x64|Darwin PowerPC console 160x64 support (1280x1024 pixels),
3868 xnuppc+200x64|Darwin PowerPC console 200x64 support (1600x1024 pixels),
3871 xnuppc+200x75|Darwin PowerPC console 200x75 support (1600x1200 pixels),
3874 xnuppc+256x96|Darwin PowerPC console 256x96 support (2048x1536 pixels),
3875 cols#0x100, lines#96,
3877 # These are different combinations of the building blocks
3879 xnuppc-m|darwin-m|Darwin PowerPC console (monochrome),
3882 xnuppc|darwin|Darwin PowerPC console (color),
3883 use=xnuppc+c, use=xnuppc+basic,
3885 xnuppc-m-b|darwin-m-b|Darwin PowerPC console (monochrome w/color-bold),
3888 xnuppc-b|darwin-b|Darwin PowerPC console (color w/color-bold),
3889 use=xnuppc+b, use=xnuppc+c,
3891 xnuppc-m-f|darwin-m-f|Darwin PowerPC console (fancy monochrome),
3894 xnuppc-f|darwin-f|Darwin PowerPC console (fancy color),
3895 use=xnuppc+f, use=xnuppc+c,
3897 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC console (alternate fancy monochrome),
3900 xnuppc-f2|darwin-f2|Darwin PowerPC console (alternate fancy color),
3901 use=xnuppc+f2, use=xnuppc+c,
3903 # Combinations for specific screen sizes
3904 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC console (monochrome) 80x25,
3905 use=xnuppc+80x25, use=xnuppc+basic,
3907 xnuppc-80x25|darwin-80x25|Darwin PowerPC console (color) 80x25,
3908 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3910 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC console (monochrome) 80x30,
3911 use=xnuppc+80x30, use=xnuppc+basic,
3913 xnuppc-80x30|darwin-80x30|Darwin PowerPC console (color) 80x30,
3914 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3916 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC console (monochrome) 90x30,
3917 use=xnuppc+90x30, use=xnuppc+basic,
3919 xnuppc-90x30|darwin-90x30|Darwin PowerPC console (color) 90x30,
3920 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3922 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC console (monochrome) 100x37,
3923 use=xnuppc+100x37, use=xnuppc+basic,
3925 xnuppc-100x37|darwin-100x37|Darwin PowerPC console (color) 100x37,
3926 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3928 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC console (monochrome) 112x37,
3929 use=xnuppc+112x37, use=xnuppc+basic,
3931 xnuppc-112x37|darwin-112x37|Darwin PowerPC console (color) 112x37,
3932 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3934 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC console (monochrome) 128x40,
3935 use=xnuppc+128x40, use=xnuppc+basic,
3937 xnuppc-128x40|darwin-128x40|Darwin PowerPC console (color) 128x40,
3938 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3940 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC console (monochrome) 128x48,
3941 use=xnuppc+128x48, use=xnuppc+basic,
3943 xnuppc-128x48|darwin-128x48|Darwin PowerPC console (color) 128x48,
3944 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3946 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC console (monochrome) 144x48,
3947 use=xnuppc+144x48, use=xnuppc+basic,
3949 xnuppc-144x48|darwin-144x48|Darwin PowerPC console (color) 144x48,
3950 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3952 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC console (monochrome) 160x64,
3953 use=xnuppc+160x64, use=xnuppc+basic,
3955 xnuppc-160x64|darwin-160x64|Darwin PowerPC console (color) 160x64,
3956 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3958 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC console (monochrome) 200x64,
3959 use=xnuppc+200x64, use=xnuppc+basic,
3961 xnuppc-200x64|darwin-200x64|Darwin PowerPC console (color) 200x64,
3962 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3964 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC console (monochrome) 200x75,
3965 use=xnuppc+200x75, use=xnuppc+basic,
3967 xnuppc-200x75|darwin-200x75|Darwin PowerPC console (color) 200x75,
3968 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
3970 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC console (monochrome) 256x96,
3971 use=xnuppc+256x96, use=xnuppc+basic,
3973 xnuppc-256x96|darwin-256x96|Darwin PowerPC console (color) 256x96,
3974 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
3976 ######## DOS/WINDOWS
3977 # CRT is shareware. It implements some xterm features, including mouse.
3978 crt|crt-vt220|CRT 2.3 emulating VT220,
3980 ncv@, use=vt100+enq, use=vt220-base, use=ecma+color,
3982 # SecureCRT 8.7.3.2279
3983 # 8.7.3 was released 2020/08/11
3985 # VanDyke Software, Inc.
3987 # Advertised features:
3988 # Xterm 24-bit color
3990 # Double-size characters
3991 # Xterm extensions for mouse support and changing title bar
3992 # Emulates VT100, VT102, VT220, VT320, Linux console, SCO ANSI,
3993 # TN3270, TVI910, TVI925, Wyse 50/60, and ANSI.
3995 # Added ANSI sc/rc and REP in 2019/12/17
3996 # Added TVI910/ TVI925 in 2019/11/20
3999 # Emulate "Xterm", using "ANSI with 256color"
4000 # TERM=xterm-256color
4003 # DA1 \E[?62;1;2;6;7;8;9c (vt220 with DRCS and NRCS)
4005 # double-sized characters do not work
4006 # Menu-1 fails (window resizes to 132-columns, but does not repaint)
4007 # NRCS fails (tried French, but none of the replacements worked)
4008 # VT100 line-drawing works, except the C/R, etc., are an hline.
4009 # VT52 works except for S8C1T bug.
4010 # RIS hangs the terminal.
4011 # Local SRM does not echo.
4012 # Some of the VT320/VT220 status reports work, not locator or DECXCPR
4013 # DECUDK works if I press shift.
4014 # Fails CHT, CNL, CPL
4015 # Does not honor bce with ECH
4016 # ERM/SPA does not work
4017 # REP has 11 +'s except for final 2 +'s, like PuTTY.
4019 # DECRPM does not respond.
4020 # dtterm modify/report operations do not work
4021 # Alternate screen works.
4023 # highlight tracking does not work.
4024 # any event tracking does not work, but
4025 # button event tracking does work.
4026 # DEC locator does not work.
4027 # SGR coordinates does not work.
4029 # reset6 does reset to 80-columns
4030 # ncurses RGB edit does not work.
4031 # direct colors don't work, probably needs semicolons.
4033 # blink works, but not dim or invis
4034 # no italics or crossed-out
4036 # 256color handles "-r" option (but test/ncurses menu d does not alter)
4037 # dynamic colors queries do not work, though it seems some can be set.
4038 # resize.pl gets no reply, resize.sh needs fix for no reply.
4039 scrt|securecrt|SecureCRT emulating xterm-256color,
4041 bel@, cvvis@, kcbt=\E[Z, use=vt220+pcedit,
4042 use=xterm+256setaf, use=ecma+index, use=ansi+rep,
4043 use=xterm+keypad, use=xterm+pcfkeys, use=xterm-basic,
4047 # 11.24 was released 2020/08/13
4048 # Celestial Software
4050 # Advertised features:
4051 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT)
4052 # Double-size characters
4053 # Xterm extensions for mouse support
4054 # Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi,
4055 # ANSIBBS, WYSE60, TeleVideo 950.
4061 # DA1: \E[?62;1;2;6;7;8;9;15;22c (VT200 with DRCS, UDK, NRCS)
4064 # + NRCS tests do not work
4065 # + DECUDK test fails
4066 # + VT100 double-sized characters work
4067 # menu-1 autowrap does not work
4068 # supports blinking text
4069 # VT220 DECSCA last screen (ignoring ECH, etc), leaves fill on top/left
4070 # VT220 device status reports fail, except operating status
4071 # 8-bit controls work
4072 # xterm alternate screen recognized, but cursor restored incorrectly
4073 # xterm mouse (normal, any event, button event) works
4074 # xterm highlight-mouse does not work properly, confused with any-event
4075 # does not recognize SGR-mouse mode
4076 # supports xterm window-modifiny/reporting controls
4077 # supports ECMA-48 cursor movement except HPR
4078 # supports REP and SD, but not ECMA-48 SL, SR, SU
4080 # italics and crossed-out do not work
4081 # supports xterm-style modified function-keys, using X11R6 F1-F4.
4082 # does not support modified cursor-keys or editing-keys
4083 # uses VT220-style Home/End
4084 # if alt-keys are enabled,
4085 # meta-mode sends escape rather than shifting, in 7-bit mode
4086 # meta-mode does the expected shifting in 8-bit mode
4088 # supports 256-colors, including changing palette (ncurses menu d works)
4089 # supports UTF-8, but honors VT100 line-drawing
4090 absolute|Absolute Telnet emulating xterm,
4091 kcbt=\E[Z, use=ecma+index, use=linux+kbs, use=ansi+rep,
4092 use=vt220+pcedit, use=xterm+keypad, use=xterm+app,
4093 use=xterm+pcf0, use=xterm+256color, use=xterm+x11mouse,
4097 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
4099 # PuTTY 0.78 (September 2020, tested 12 August 2023)
4100 # Testing with tack:
4101 # implements cross-out text (shortly after 0.74)
4102 # restore kLFT as kLFT5, etc. (mentioned in October 2021)
4103 # does not support direct-colors (mentioned in July 2021)
4105 # PuTTY 0.74 (27 June 2020)
4108 # PuTTY 0.73 (September 2019)
4109 # Testing with tack:
4110 # does not implement italics
4111 # does not implement cross-out text
4112 # its settings dialog allows some of the VT100 line-drawing tests to pass
4113 # (not the padding test, though)
4114 # Testing with vttest:
4115 # xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented.
4116 # does not implement protected areas
4117 # does not implement SL/SR
4119 # PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also
4120 # changed longstanding keypad assignments, so that these no longer apply:
4121 # kLFT=\E[D, kRIT=\E[C, kb2=\E[G,
4123 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
4124 # in 2017 (0.70) -TD
4126 # Comparing with 0.51, vttest is much better (only a few problems with the
4127 # cursor position reports and wrapping).
4129 # PuTTY 0.51 (14 December 2000)
4131 # This emulates VT100 + VT52 (plus a few VT220 features: ech, SRM, DECTCEM, as
4132 # well as SCO and Atari, color palettes from Linux console). Reading the code,
4133 # it is intended to be VT102 plus selected features. By default, it sets $TERM
4134 # to xterm, which is incorrect, since several features are misimplemented:
4136 # Alt+key always sends ESC+key, so 'km' capability is removed.
4138 # Control responses, wrapping and tabs are buggy, failing a couple of
4139 # screens in vttest.
4141 # xterm mouse support is not implemented (unreleased version may).
4143 # Several features such as backspace/delete are optional; this entry documents
4144 # the default behavior. None of the combinations of keyboard settings match
4145 # those used for xterm -TD
4147 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
4148 # but implements it incorrectly as mentioned here:
4149 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
4150 putty|PuTTY terminal emulator,
4151 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
4153 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4154 bel=^G, cr=\r, cub1=^H, cud1=\ED, cup=\E[%i%p1%d;%p2%dH,
4155 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
4156 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
4157 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
4158 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
4159 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
4160 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
4161 %%G\340\202\242\E%%@%e%p1%c%;,
4162 ech=\E[%p1%dX, el1=\E[1K, enacs=\E(B\E)0,
4163 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4165 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
4166 %02x%p4%{255}%*%{1000}%/%02x,
4167 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
4168 kbs=^?, kcbt=\E[Z, khome=\E[1~, kind=\E[B, kri=\E[A, kspd=^Z,
4169 nel=\r\n, oc=\E]R, op=\E[39;49m, ri=\EM, rmacs=^O,
4170 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
4172 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
4173 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
4174 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4175 %;m%?%p9%t\016%e\017%;,
4176 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
4177 smkx=\E[?1h\E=, vpa=\E[%i%p1%dd, E3=\E[3J,
4178 use=ansi+apparrows, use=ansi+csr, use=ansi+erase,
4179 use=ansi+idl, use=ansi+local, use=ansi+tabs,
4180 use=ansi+rep, use=bracketed+paste, use=ecma+index,
4181 use=ecma+strikeout, use=klone+color, use=klone+sgr,
4182 use=putty+cursor, use=putty+fnkeys, use=vt220+pcedit,
4183 use=xterm+alt1049, use=vt102+enq, use=xterm+sm+1006,
4184 use=xterm+sl, use=vt100+fnkeys, use=putty+keypad,
4187 # older versions (e.g., before 0.71) of PuTTY used a shift-modifier to toggle
4188 # between normal- and application-mode for the cursor-keys. That was dropped,
4189 # and a few years later (after 0.74) restored as the control-modifier.
4190 putty+cursor|PuTTY modified cursor-keys,
4191 kDN5=\E[B, kLFT5=\E[D, kRIT5=\E[C, kUP5=\E[A,
4192 putty+keypad|PuTTY numeric keypad,
4193 kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
4194 kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
4195 kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp,
4197 vt100-putty|Reset PuTTY to pure VT100,
4198 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
4200 putty-256color|PuTTY 0.58 with xterm 256-colors,
4201 use=xterm+256setaf, use=putty,
4202 putty-noapp|putty with cursor keys in normal mode,
4203 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4204 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
4207 # One of the keyboard selections is "VT100+".
4208 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
4209 putty-vt100|VT100+ keyboard layout,
4210 use=putty+fnkeys+vt100, use=putty,
4212 putty-sco|putty with SCO function keys,
4213 use=putty+fnkeys+sco, use=putty,
4215 # PuTTY has more than one section in its Keyboard configuration:
4216 # a) backspace/delete, which we ignore since that choice largely depends on
4217 # whether one matches Unix and BSD or Linux.
4218 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
4219 # are unrelated to rxvt's actual settings.
4220 # c) function keys and keypad - this is the interesting part. None of the
4221 # selections match any of their respective namesakes, but they are shown
4222 # here to help users who expect that the selections do what is implied.
4224 # This is the default setting for PuTTY
4225 putty+fnkeys|fn-keys for PuTTY,
4226 use=putty+fnkeys+esc,
4228 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
4229 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4230 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4231 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
4232 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
4233 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4235 putty+fnkeys+linux|Linux fn-keys for PuTTY,
4236 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4237 use=putty+fnkeys+esc,
4239 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
4240 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4241 use=putty+fnkeys+esc,
4243 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
4244 use=putty+fnkeys+esc,
4246 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
4248 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
4249 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
4250 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4251 kf9=\EOX, use=putty+fnkeys+esc,
4253 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
4255 # Use modifiers to obtain function keys past 12:
4258 # F25-F36 - control/alt
4259 # F37-F48 - control/shift
4261 putty+fnkeys+sco|SCO fn-keys for PuTTY,
4262 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4263 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4264 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4265 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4266 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4267 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4268 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4269 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4270 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4271 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4272 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4273 kich1=\E[L, knp=\E[G, kpp=\E[I,
4276 # https://github.com/mintty/mintty
4278 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
4279 # 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but
4280 # larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc).
4282 # Version 3.0 responds to DA as a VT400, however it does not implement the
4283 # application keypad. The assignment of cursor-keys versus modifiers differs
4284 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
4286 # Thomas Wolff suggested these extensions:
4287 # blink2 turn on rapid blinking
4288 # blink0 turn off blinking
4289 # norm turn off bold and half-bright mode
4290 # opaq turn off blank mode
4291 # smul2 begin double underline mode
4292 # smol begin overline mode
4293 # rmol exit overline mode
4294 # Font0 use default font
4295 # Font1 use alternative font 1
4297 # Font10 use alternative font 10
4298 # setal set (under)line color
4299 # ol set default (under)line color
4300 # overs overstrike (print characters over each other)
4302 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4303 mintty|Cygwin Terminal,
4304 setal=\E[5%p1%dm, use=xterm+256color,
4306 mintty-direct|Cygwin Terminal direct-color,
4307 use=kitty+setal, use=xterm+direct, use=mintty+common,
4308 mintty+common|shared capabilities for mintty,
4310 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4311 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4312 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1:2m,
4313 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4314 Smulx=\E[4:%p1%dm, blink2=\E[6m, norm=\E[22m,
4315 opaq=\E[28m, smul2=\E[21m, use=linux+kbs, use=ansi+rep,
4316 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4317 use=xterm+focus, use=xterm+sm+1006, use=xterm+pcfkeys,
4318 use=xterm+tmux, use=ecma+italics, use=xterm-basic,
4319 use=bracketed+paste, use=report+version,
4320 # 2019-06-09: These capabilities are commented-out for compatibility with
4321 # existing releases 5.9-6.1, and may be considered for inclusion after the
4322 # release of ncurses 6.2:
4340 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4341 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4342 # (communication program) which supports:
4344 # - Serial port connections.
4345 # - TCP/IP (telnet) connections.
4346 # - VT100 emulation, and selected VT200/300 emulation.
4347 # - TEK4010 emulation.
4348 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4350 # - Scripts using the "Tera Term Language".
4351 # - Japanese and Russian character sets.
4353 # The program does not come with terminfo or termcap entries. However, the
4354 # emulation (testing with vttest and ncurses) is reasonably close to VT100 (no
4355 # VT52 or doublesize character support; blinking is done with color). Besides
4356 # the HPA, VPA extensions it also implements CPL and CNL.
4358 # All of the function keys can be remapped. This description shows the default
4359 # mapping, as installed. Both VT100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4360 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4361 # is laid out like VT220, rather than the face codes on the PC keyboard, i.e,
4369 # ANSI colors are implemented, but cannot be combined with video attributes
4370 # except for reverse.
4372 # No fonts are supplied with the program, so the acsc string is chosen to
4373 # correspond with the default Microsoft terminal font.
4375 # Tera Term recognizes some xterm sequences, including those for setting and
4376 # retrieving the window title, and for setting the window size (i.e., using
4377 # "resize -s"), though it does not pass SIGWINCH to the application if the
4378 # user resizes the window with the mouse.
4379 teraterm2.3|Tera Term Pro 2.3,
4382 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4383 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4384 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4385 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C,
4386 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4387 dch1=\E[P, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4388 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, kf1=\E[11~,
4389 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4390 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4391 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4392 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4393 kf8=\E[19~, kf9=\E[20~, op=\E[100m, rev=\E[7m, ri=\EM,
4394 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4395 smul=\E[4m, vpa=\E[%i%p1%dd, use=ansi+idl,
4396 use=vt220+vtedit, use=vt100+enq, use=klone+color,
4397 use=vt100, use=vt220+cvis,
4399 # Version 4.59 has regular VT100 line-drawing (so it is no longer necessary
4400 # to choose a Windows OEM font).
4402 # Testing with tack:
4403 # - it does not have xenl (suppress that)
4404 # - underline seems to work with color (modify ncv).
4405 # Testing with vttest:
4406 # - wrapping differs from VT100 (menu 1).
4407 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4409 # - it recognizes the dtterm window controls for reporting size in
4410 # characters and pixels.
4411 # - it passes SIGWINCH.
4412 teraterm4.59|Tera Term Pro 4.59,
4415 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4416 kmous=\E[M, use=teraterm2.3,
4420 # Testing with tack:
4421 # - no bell (flash works)
4422 # - bold is yellow, blink is red.
4423 # - default keyboard sends ^? for Delete, can be configured for kdch1
4425 # Testing with vttest:
4426 # + autowrap has problems...
4427 # + color-tests for bce feature match xterm's behavior
4428 # + handles most of xterm's mouse-controls other than highlight-tracking.
4429 # xterm's SGR 1006 works.
4430 # + partial support for DEC locator-events
4431 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4432 # + has a "Tek" window, but does not work with vttest's examples
4433 # + supports the dtterm window modify/report controls
4434 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4436 # + VT220 screen-display tests are ok
4439 # + recognizes xterm's original direct-colors sequences, but result is
4441 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4442 teraterm4.97|Tera Term Pro 4.97,
4443 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4444 teraterm-256color|TeraTerm with xterm 256-colors,
4445 use=xterm+256setaf, use=teraterm,
4452 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4453 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4456 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4457 # for casual (occasional) use. Also fails several of the vttest screens,
4458 # but that is not unusual for VT100 "emulators".
4459 # b) Does not implement VT100 keypad
4460 # c) Recognizes a subset of VT52 controls.
4461 ms-vt100|MS telnet imitating DEC VT100,
4463 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4464 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4465 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4466 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4467 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4469 # Tested with Windows 2000, the telnet application runs in a console window,
4470 # also using 'Terminal' font.
4473 # a) This version has no function keys or numeric keypad. Unlike the older
4474 # version, the numeric keypad is entirely ignored.
4475 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4476 ms-vt100-color|vtnt|windows 2000 ANSI (sic),
4478 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4481 # Based on comments from Federico Bianchi:
4483 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4484 # scheme for PF keys.
4486 # and PuTTY wishlist:
4488 # The modifiers are represented as the codes listed above, prefixed to
4489 # the normal sequences. If the modifier is pressed alone, its sequence
4490 # is transmitted twice in succession. If multiple modifiers apply,
4491 # they're transmitted in the order shift, control, alt.
4496 ms-vt100+|vt100+|windows XP VT100+ (sic),
4497 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4498 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4499 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4500 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4501 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4502 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4503 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4504 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4505 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4506 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4507 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4508 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4509 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4510 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4511 knp=\E/, kpp=\E?, use=ms-vt100-color,
4513 ms-vt-utf8|vt-utf8|UTF-8 flavor of VT100+,
4516 # VT-UTF-8 and VT100+ Protocols
4517 # https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-vuvp/969416c0-ccd6-4a75-a9b3-597d7713845b
4519 # This Microsoft "protocol" adapted the aixterm 16-color feature from xterm's
4520 # documentation in 2015, as seen in successive revisions:
4522 # 2013/07/22 has 8 colors
4523 # 2015/10/16 has 16 colors using SGR 90-97, 100-107 as well as SGR 24 and 27,
4524 # adds "informative" reference to xterm's ctlseqs
4526 # The cnorm/civis definitions added in 2015 are unrelated to any standard.
4527 ms-vt100-16color|VT-UTF-8 and VT100+,
4528 civis=\E[?h, cnorm=\E[?l, rmso=\E[27m, rmul=\E[24m,
4529 use=ibm+16color, use=ms-vt100+,
4532 # https://docs.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences
4533 # We use this scheme to map function keys
4534 # terminfo modifier code keys
4535 # kf13-kf24 shift 2 F1 to F12
4536 # kf25-kf36 alt 3 F1 to F12
4537 # kf37-kf48 control 4 F1 to F12
4538 # kf49-kf60 ctrl-alt 7 F1 to F12
4540 # Unclear: smam and rmam implemented?
4541 # Unclear: rmkx, smkx, rmir, smir - irrelevant?
4544 # + According to tack, tbc and cbt fail.
4545 # + The line-drawing (acsc) does not work in telnet or ssh. I added the
4546 # U8 extension to tell ncurses to use UTF-8 for line-drawing (when the
4547 # locale uses UTF-8). That won't work for telnet (which uses ASCII),
4548 # but seems to work for OpenSSH's ssh. I set the codepage to 65001,
4550 # + Function keys... do not work consistently in telnet and ssh. With
4551 # telnet, kf1-kf4 are \EOP to \EOS, and kf5-kf12 match the terminfo.
4552 # But with ssh, it's entirely different (reminds me of rxvt).
4553 winconsole|Windows 10 new console,
4554 am, km, mir, msgr, xenl,
4556 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
4558 bel=^G, blink@, cr=\r, ech=\E[%p1%dX, el1=\E[0K, ich1@, ind=\n,
4559 invis@, is1=\E[!p, kf13=\E[11;2~, kf14=\E[12;2~,
4560 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
4561 kf18=\E[17;2~, kf19=\E[18;2~, kf20=\E[19;2~,
4562 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[24;2~,
4563 kf24=\E[25;2~, kf25=\E[11;3~, kf26=\E[12;3~,
4564 kf27=\E[13;3~, kf28=\E[14;3~, kf29=\E[15;3~,
4565 kf30=\E[17;3~, kf31=\E[18;3~, kf32=\E[19;3~,
4566 kf33=\E[20;3~, kf34=\E[21;3~, kf35=\E[24;3~,
4567 kf36=\E[25;3~, kf37=\E[11;4~, kf38=\E[12;4~,
4568 kf39=\E[13;4~, kf40=\E[14;4~, kf41=\E[15;4~,
4569 kf42=\E[17;4~, kf43=\E[18;4~, kf44=\E[19;4~,
4570 kf45=\E[20;4~, kf46=\E[21;4~, kf47=\E[24;4~,
4571 kf48=\E[25;4~, kf49=\E[11;7~, kf50=\E[12;7~,
4572 kf51=\E[13;7~, kf52=\E[14;7~, kf53=\E[15;7~,
4573 kf54=\E[17;7~, kf55=\E[18;7~, kf56=\E[19;7~,
4574 kf57=\E[20;7~, kf58=\E[21;7~, kf59=\E[24;7~,
4575 kf60=\E[25;7~, khome=\E[1~, nel=\r\n, ri=\E[T, rmacs=\E(B,
4576 rmir@, rmpch@, rs1=\E[!p,
4577 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
4579 sgr0=\E[0m\E(B, smacs=\E(0, smir@, smpch@, use=ansi+arrows,
4580 use=ansi+csr, use=ansi+cup, use=ansi+erase, use=ansi+idc,
4581 use=ansi+idl, use=ecma+index, use=ansi+inittabs,
4582 use=ansi+local, use=ecma+sgr, use=ecma+color,
4583 use=vt220+cvis, use=vt220+pcedit, use=xterm+nopcfkeys,
4585 # Windows Terminal (Preview)
4586 # https://github.com/microsoft/terminal
4588 # Windows 10 22H2 (also Windows 11)
4589 # Version 1.16.10261.0
4591 # - Windows Terminal #1553: "Feature Request: Mouse/Touch/Pointer Bindings
4592 # (like middle-click paste, right-click context menu, etc.)", compare to
4593 # https://learn.microsoft.com/en-us/windows/console/mouse-event-record-str
4594 # This appears to be related to a problem with its implementation of the
4595 # Console API; the mouse does not work in a "Command Window" (e.g., as used
4596 # in the ncurses MinGW driver), although escape sequences work.
4599 # Version 1.9.1942.0
4601 # This has longstanding issues with CR/LF mapping, e.g.,
4602 # - first reported by Juergen Pfeifer August 13, 2020, with workaround
4603 # - Windows Terminal #8303 "Updates to ms-terminal terminal type in terminfo to
4605 # - Windows Terminal #6733 "Midnight Commander (mc) output is screwed when
4606 # using the 'ms-terminal' as $TERM"
4608 # still seen in testing during May-July 2021. As a workaround, this terminal
4609 # description sets cud1 to an escape sequence rather than just \r.
4611 # Using TERM=xterm-256color shows a number of problems.
4612 # A few are seen only in the WSL2 environment.
4615 # - flash does not work.
4616 # - video attribute blink does not work.
4617 # - video attribute invis does not work in WSL2.
4618 # - italics sitm/ritm do not work in WSL2.
4619 # - crossed-out smxx/rmxx do not work in WSL2.
4620 # - reloading colors via initp interchanges red/blue.
4621 # - does not implement OSC 104, which is used for resetting colors in xterm.
4622 # - does not support numeric keypad application mode.
4623 # - control-modifier (without alt/shift) does not work for special keys.
4624 # - meta-key sends escape character rather than acting as a meta key.
4627 # - identifies itself as a VT100.
4628 # - cursor movement (menu 1) does not work properly, e.g., for wrapping.
4629 # - does not support 8-bit controls.
4630 # - does not support VT420 rectangles.
4631 # - does not support VT420 left/right margins.
4632 # - ECMA-48 cursor-movement works.
4633 # - does not support X10 mouse, or mouse highlight tracking.
4634 # - SGR mouse mode 1006 works.
4635 # - any-event mouse mode shows no focus-in/focus-out events.
4636 # - alternate screen 47/48 modes do not work, nor do 1047/1048.
4637 # - alternate screen 1049 mode works.
4638 # - none of the window report/modify operations work.
4639 # - none of the DECRPM/DECRQM reporting operations work.
4642 # - 256colors2.pl -r, -i and -q options work.
4643 # - dynamic colors do not work.
4644 # - paste64.pl does not work, i.e., bracketed-paste.
4645 # - tcapquery.pl does not work.
4648 # Version 0.2.1831.0
4650 # The task manager shows this as "OpenConsole.exe", which differs
4651 # from the "Windows Command Processor" used for the command-prompt.
4653 # The settings dialog does not work (unless the end user expects to open
4654 # profiles.json in Visual Studio). There is no documentation, of course.
4656 # Testing via an ssh connection, using openssh:
4657 # - the program sets TERM to cygwin if the tab is set to PowerShell,
4658 # and to xterm-256color if "Legacy". However, in the latter, more tests
4659 # fail in vttest, which does not pay attention to TERM.
4661 # - menu 1 (tests for cursor movement) misbehaves like command-prompt
4662 # - primary DA says this is a vanilla VT100
4663 # - does not flush response to primary DA, leaving a ^M on the end when
4664 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
4665 # work properly in this test.
4666 # - in the generic VT100 tests, there are problems with character sets
4667 # (diamond shows as a double-width character, DEL as two replacement-chars).
4668 # - outside of the generic VT100 tests, the program does poorly because most
4669 # of the features are missing.
4670 # - ECH does not work properly
4671 # - a few generic xterm features are supported (set window title), but
4672 # others are missing (such as the mouse).
4673 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
4675 # - blink, dim, bold, invis, protect do not work
4676 # - bce works (but per vttest, with ED, EL, not ECH)
4677 # - does not support keypad application mode
4678 # - implements most of the xterm modified keys; sometimes modifiers are ignored
4679 # or simply incorrect
4680 # - sends escape+key rather than implementing meta mode
4682 # - color palette can be altered, but OSC 104 for resetting does not work
4683 # - crashed with a script used for testing NRCS.
4684 # - does not recognize either xterm+direct or xterm+indirect escapes.
4685 ms-terminal|Windows10 terminal,
4687 cud1=\E[B, kcbt=\E[Z, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@,
4688 Cr@, Ms@, use=linux+kbs, use=xterm+256color,
4689 use=xterm+pcfkeys, use=ansi+rep, use=xterm+sm+1006,
4690 use=ecma+index, use=ecma+italics, use=ecma+strikeout,
4691 use=xterm-basic, use=xterm+tmux,
4694 # Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/).
4697 # - fixes menu 1 problem with wrapping
4699 # - fixes menu 8 problem with delete-character
4701 # - keypad application mode still does not work; PF1-PF4 are not assigned.
4702 # - DECRQM/DECRPM do not work
4703 # - xterm mouse features:
4704 # - SGR coordinates work; the other modes do not (see vscode #96058)
4705 # - focus-events are not sent
4706 # - mouse highlight tracking does not send button event
4708 # - little or no change since previous review
4710 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
4711 # https://code.visualstudio.com/docs/editor/integrated-terminal
4713 # This sets TERM to xterm-256color, which is a little more successful than
4717 # - menu 1 (cursor movement) has problems with wrapping
4718 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response
4719 # - menu 8 (insert/delete char/line) has problem with delete-character
4720 # - like Windows Terminal, fails the ECH test: neither supports DECALN
4721 # However, the bce test with ECH works.
4722 # - does not support keypad application mode
4723 # - supports most xterm mode controls (except DEC Locator Events)
4724 # - REP, SL/SL do not work, but SD/SU work.
4725 # - the alternate-screen tests fail because it does not support DECALN
4726 # - window modify/report is not supported
4727 # - supports some VT320 presentation reports
4729 # - does not support blinking text
4730 # - implements most of the xterm modified keys, with some exceptions:
4731 # - pageup/pagedown do not send escapes
4732 # - alt cursor left/right send escape-b and escape-f
4733 # - sends UTF-8 like xterm for meta mode
4735 # - mouse mode is not reset by reset-sequence
4736 # - supports italics and dim, but not cross-out or double-underline
4737 # - color-palette cannot be changed
4738 vscode|xterm.js|Visual Studio Code terminal using xterm.js,
4740 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=linux+kbs,
4741 use=xterm+256setaf, use=ecma+index, use=xterm+focus,
4742 use=xterm+sm+1006, use=xterm+pcfkeys, use=ecma+italics,
4743 use=xterm-basic, use=bracketed+paste,
4744 vscode-direct|Visual Studio Code with direct-colors,
4745 use=xterm+indirect, use=vscode,
4747 ######## X TERMINAL EMULATORS
4750 # You can add the following line to your .Xdefaults to change the terminal type
4751 # set by the xterms you start up to my-xterm:
4753 # *termName: my-xterm
4755 # System administrators can change the default entry for xterm instances
4756 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4757 # case, xterm will detect and reject an invalid terminal type, falling back
4758 # to the default of xterm.
4761 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4762 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4763 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4764 # as these seem not to work -- esr)
4765 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4766 OTbs, am, km, mir, msgr, xenl, xon,
4767 cols#80, it#8, lines#65,
4768 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4769 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4770 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, ed=\E[J, el=\E[K,
4771 home=\E[H, ht=^I, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4772 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4773 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4774 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4775 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4776 smso=\E[7m, smul=\E[4m, use=ansi+idl,
4778 # csl is extension which clears the status line
4779 x10term+sl|status-line for X10 xterm,
4781 dsl=\E[?H, fsl=\E[?F, tsl=\E[?E\E[?%i%p1%dT, csl=\E[?E,
4783 # Compatible with the R5 xterm
4784 # (from the XFree86 3.2 distribution, <blink=@> removed)
4785 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4786 # corrected typos in rs2 string - TD
4788 xterm-r5|xterm R5 version,
4789 OTbs, am, km, msgr, xenl,
4790 cols#80, it#8, lines#24,
4791 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
4792 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
4793 hts=\EH, ind=\n, kdl1=\E[31~, kel=\E[8~, kf0=\EOq,
4794 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4795 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~,
4796 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
4797 kil1=\E[30~, kmous=\E[M, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>,
4798 rmso=\E[m, rmul=\E[m,
4799 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4800 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4802 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4803 tbc=\E[3g, use=xterm+kbs, use=ansi+apparrows,
4804 use=ansi+csr, use=ansi+idc, use=ansi+idl, use=ansi+local,
4805 use=vt220+pcedit, use=vt100+enq,
4807 # Compatible with the R6 xterm
4808 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4809 # added khome/kend, hts based on the R6 xterm code - TD
4810 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4811 # for compatibility with other emulators).
4812 xterm-r6|xterm X11R6 version,
4813 OTbs, am, km, mir, msgr, xenl,
4814 cols#80, it#8, lines#24,
4815 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4816 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
4817 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4818 dch1=\E[P, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H, ht=^I,
4820 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4821 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
4822 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4823 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4824 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4825 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4826 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em,
4827 rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmkx=\E[?1l\E>,
4828 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4829 sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=, tbc=\E[3g,
4830 use=xterm+alt47, use=ansi+csr, use=ansi+idl,
4831 use=ansi+local, use=ansi+sgrso, use=ansi+sgrul,
4832 use=vt220+vtedit, use=xterm+kbs, use=vt100+enq,
4834 xterm-old|antique xterm version,
4836 # The monochrome version began as a copy of "xtermm" (from Solaris), and was
4837 # initially part of the xterm sources (in XFree86). But "xterm" continued to
4838 # grow, while "xterm-mono" had none of the newer features. Additionally,
4839 # inheriting from "xtermm" runs into several problems, including different
4840 # function keys as well as the fact that the mouse support is not compatible.
4841 # This entry restores the original intent, intentionally not an alias to
4842 # simplify maintenance -TD
4843 xterm-mono|monochrome xterm,
4845 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4846 # The name has been changed and some aliases have been removed.
4847 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4848 OTbs, am, bce, km, mir, msgr, xenl, XT,
4849 cols#80, lines#24, ncv@,
4850 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4851 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
4852 cup=\E[%i%p1%d;%p2%dH, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4853 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
4854 home=\E[H, hpa=\E[%i%p1%dG, ind=\n,
4855 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4856 kbeg=\EOE, kbs=^?, kdch1=^?, kend=\EOF, kf1=\E[11~,
4857 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4858 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4859 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4860 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4861 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kmous=\E[M, kslt=\E[4~,
4862 meml=\El, memu=\Em, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
4863 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O,
4864 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4865 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4867 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4869 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4870 %;m%?%p9%t\016%e\017%;,
4871 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
4872 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
4873 use=ansi+apparrows, use=ansi+csr, use=ansi+idc,
4874 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
4875 use=xterm+alt47, use=xterm+kbs, use=vt100+enq,
4876 use=ecma+color, use=vt220+cvis, use=vt220+keypad,
4879 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4880 # codes for F1-F4 except while in VT220 mode.
4881 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4882 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4884 # This version was released in XFree86 3.3.3 (November 1998).
4885 # Besides providing printer support, it exploits a new feature that allows
4886 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4887 # -- the distribution contained incorrect khome/kend values -TD
4888 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4889 blink=\E[5m, ich1@, invis=\E[8m,
4890 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4891 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4892 rs2=\E[!p\E[?3;4l\E[4l\E>,
4893 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4894 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4895 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4898 # This version was released in XFree86 4.0.
4899 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4901 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4902 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4903 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kf13=\EO2P, kf14=\EO2Q,
4904 kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~,
4905 kf19=\E[18;2~, kf20=\E[19;2~, kf21=\E[20;2~,
4906 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P,
4907 kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~,
4908 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4909 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4910 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4911 kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~,
4912 kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~,
4913 kf47=\E[23;6~, kf48=\E[24;6~,
4914 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4916 use=xterm+alt1049, use=xterm-xf86-v333,
4918 # This version was released in XFree86 4.3.
4919 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4920 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4921 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4923 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4924 %p7%t;8%;m%?%p9%t\016%e\017%;,
4927 # Controlling the cursor-visibility is not a "new" feature, but was generally
4928 # neglected in terminal emulators until the mid-1990s. These would work for
4929 # the hardware terminals, or for more recent emulators, e.g., xterm.
4930 vt220+cvis|DECTCEM VT220 cursor-visibility,
4931 civis=\E[?25l, cnorm=\E[?25h,
4932 vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility,
4933 civis=\233?25l, cnorm=\233?25h,
4934 # The first block is for terminals which did not support blinking cursor.
4935 att610+cvis0|AT&T 610 cursor-visibility,
4936 civis=\E[?25l, cnorm=\E[?12l\E[?25h,
4937 att610+cvis|AT&T 610 cursor-visibility with blink,
4938 civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
4940 # This version was released in XFree86 4.4.
4941 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4942 use=att610+cvis, use=ecma+index, use=xterm-xf86-v43,
4944 xterm-xfree86|xterm terminal emulator (XFree86),
4947 xterm+nofkeys|building block for xterm fkey-variants,
4949 kcbt=\E[Z, nel=\EE, use=ecma+index, use=ansi+rep,
4950 use=ecma+strikeout, use=vt420+lrmm, use=xterm+focus,
4951 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics,
4952 use=xterm+keypad, use=xterm-basic,
4954 xterm-p370|xterm patch #370,
4955 rv=\E\\[41;[1-6][0-9][0-9];0c,
4956 xr=\EP>\\|XTerm\\([1-9][0-9]+\\)\E\\\\,
4957 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
4958 use=xterm+pcfkeys, use=xterm+nofkeys,
4959 use=bracketed+paste, use=report+version,
4962 xterm-p371|xterm patch #371,
4963 use=dec+sl, use=xterm-p370,
4965 # This version reflects the current xterm features.
4966 xterm-new|modern xterm terminal emulator,
4969 # This fragment is for people who cannot agree on what the backspace key
4970 # should send. The ncurses configure script option "--with-xterm-kbs" can
4971 # set it to BS (standard) or DEL (Linux's notion of "vt220"). xterm provides
4972 # either, depending on how the pseudoterminals are configured.
4973 xterm+kbs|fragment for backspace key,
4976 # Use this fragment for terminals that always use DEL for "backspace".
4977 linux+kbs|fragment for "backspace" key,
4980 # This fragment describes as much of XFree86 xterm's "pc-style" function
4981 # keys as will fit into terminfo's 60 function keys.
4984 # ---------------------------------
4991 # 8 Shift + Alt + Control
4992 # ---------------------------------
4993 # The meta key may also be used as a modifier in this scheme, adding another
4994 # bit to the parameter.
4995 xterm+pcfkeys|xterm fragment for PC-style fkeys,
4996 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4999 # The xterm ctrlFKeys resource defaults to 10, so without the "pc-style"
5000 # feature, e.g., setting the modifyCursorKeys and modifyFunctionKeys resources
5001 # to -1 to disable them, one gets 42 function-keys on a 12-function-key
5004 # kf11 shift f1 = \E[23~
5005 # kf21 control f1 = \E[42~
5006 # kf31 shift control f1 = \E[52~
5007 xterm+nopcfkeys|fragment without PC-style fkeys,
5008 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5009 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5010 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
5011 kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~,
5012 kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~,
5013 kf28=\E[49~, kf29=\E[50~, kf3=\E[13~, kf30=\E[51~,
5014 kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~,
5015 kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~,
5016 kf39=\E[60~, kf4=\E[14~, kf40=\E[61~, kf41=\E[62~,
5017 kf42=\E[63~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5018 kf8=\E[19~, kf9=\E[20~,
5020 vt100+noapp|fragment with cursor keys in normal mode,
5021 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5024 xterm+noapp|fragment with cursor keys in normal mode,
5025 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
5028 xterm+app|fragment with cursor keys in application mode,
5029 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5032 vt100+noapp+pc|fragment for noapp pc-style home/end,
5033 kend=\E[F, khome=\E[H,
5035 xterm+app+pc|fragment for app pc-style home/end,
5036 kend=\EOF, khome=\EOH,
5038 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
5039 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
5040 # copied the earlier scheme, as noted in the "use=" clauses in this file.
5042 # The original assignments from patch #94 for cursor-keys had some technical
5045 # A parameter for a function-key to represent a modifier is just more
5046 # bits. But for a cursor-key it may change the behavior of the
5047 # application. For instance, emacs decodes the first parameter of a
5048 # cursor-key as a repeat count.
5050 # A parameterized string should (really) not begin with SS3 (\EO).
5051 # Rather, CSI (\E[) should be used.
5053 # For these reasons, the original assignments were deprecated. For
5054 # compatibility reasons, they are still available as a setting of xterm's
5055 # modifyCursorKeys resource. These fragments list the modified cursor-keys
5056 # that might apply to xterm+pcfkeys with different values of that resource.
5058 # These entries will have warnings when checking with tic because the kri/kind
5059 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
5060 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
5061 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
5063 # * modify xterm-new terminfo entry to use capabilities for shifted
5064 # scroll forward/reverse as shifted cursor up/down.
5066 # In the 1980s when terminfo was defined, the developers made more of
5067 # a distinction between shifted up/down versus shifted left/right since most
5068 # terminals can index (scroll up/down), while few can scroll left/right.
5069 xterm+pcc3|fragment with modifyCursorKeys:3,
5070 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
5071 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
5072 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
5073 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
5074 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
5075 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
5076 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
5077 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
5080 xterm+pcc2|fragment with modifyCursorKeys:2,
5081 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
5082 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
5083 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
5084 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
5085 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
5086 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
5087 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
5089 xterm+pcc1|fragment with modifyCursorKeys:1,
5090 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
5091 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
5092 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
5093 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
5094 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
5095 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
5097 xterm+pcc0|fragment with modifyCursorKeys:0,
5098 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
5099 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
5100 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
5101 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
5102 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
5103 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
5106 # Here are corresponding fragments from xterm patch #216:
5108 xterm+pcf0|fragment with modifyFunctionKeys:0,
5109 kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
5110 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
5111 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
5112 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
5113 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
5114 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
5115 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
5116 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
5117 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
5118 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5119 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
5120 kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, kf53=\E[15;3~,
5121 kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~,
5122 kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~,
5123 kf60=\E[24;3~, kf61=\EO4P, kf62=\EO4Q, kf63=\EO4R,
5124 use=xterm+nopcfkeys,
5126 xterm+pcf2|fragment with modifyFunctionKeys:2,
5127 kf1=\EOP, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
5128 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5129 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5130 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5131 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5132 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5133 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5134 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5135 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5136 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5137 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5138 kf48=\E[24;6~, kf49=\E[1;3P, kf50=\E[1;3Q, kf51=\E[1;3R,
5139 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5140 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5141 kf58=\E[21;3~, kf59=\E[23;3~, kf60=\E[24;3~,
5142 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R,
5143 use=xterm+nopcfkeys,
5145 # Chunks from xterm #230:
5146 xterm+pce2|fragment with modifyCursorKeys:2 editing-keys,
5147 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
5148 kNXT=\E[6;2~, kPRV=\E[5;2~, kDC3=\E[3;3~, kDC4=\E[3;4~,
5149 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F,
5150 kEND4=\E[1;4F, kEND5=\E[1;5F, kEND6=\E[1;6F,
5151 kEND7=\E[1;7F, kHOM3=\E[1;3H, kHOM4=\E[1;4H,
5152 kHOM5=\E[1;5H, kHOM6=\E[1;6H, kHOM7=\E[1;7H,
5153 kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~,
5154 kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~,
5155 kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~,
5156 kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~,
5157 kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+edit,
5159 xterm+edit|fragment for 6-key editing-keypad,
5160 use=xterm+pc+edit, use=vt220+pcedit,
5162 xterm+decedit|fragment for vt220 6-key editing-keypad,
5163 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5166 xterm+pc+edit|fragment for pc-style editing keypad,
5167 kend=\E[4~, khome=\E[1~,
5169 xterm+vt+edit|fragment for VT220-style editing keypad,
5170 kfnd=\E[1~, kslt=\E[4~,
5172 # These variations for alternate-screen and title-stacking were introduced by
5174 xterm+noalt|xterm without altscreen,
5177 xterm+alt47|X11R4 alternate-screen,
5178 rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h,
5180 xterm+alt1049|xterm 90 feature,
5181 rmcup=\E[?1049l, smcup=\E[?1049h,
5183 xterm+titlestack|xterm 251 feature,
5184 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
5186 xterm+alt+title|xterm 90 and 251 features combined,
5187 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
5189 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
5191 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
5192 # problem that the keypad layout is different, and that the natural choice for
5193 # PF1 is NumLock (which happens to be reserved for other use). To work around
5194 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
5195 # directly related to VT100.
5197 # With the VT220 keypad block that uses the 1-9 keys as suggested in
5198 # terminfo(5), the other keys can be handled with user-defined capabilities:
5200 # _______________________________________
5201 # | NumLock | / | * | - |
5202 # | | $Oo | $Oj | $OS |
5203 # |_________|__kpDIV__|__kpMUL__|__kpSUB__|
5205 # | $Ow | $Ox | $Oy | $Ok |
5206 # |_ka1__K1_|_________|_ka3__K3_| kpADD |
5208 # | $Ot | $Ou | $Ov | |
5209 # |_________|_kb2__K2_|_________|_________|
5211 # | $Oq | $Or | $Os | |
5212 # |_kc1__K4_|_________|_kc3__K5_| enter |
5215 # |_______kpZRO_______|__kpDOT__|_kent_@8_|
5217 # ka2, kb1, kb3 and kc2 are extensions, as are the mixed-case names.
5218 # There are no termcap equivalents for these extensions.
5220 # kpCMA (comma) is used here for the VT100 keypad, which xterm emulates with
5221 # shifted-keypad-plus, though normally that invokes a font-size change.
5223 # Old versions of xterm, e.g., xterm-xfree86, documented \EOE as kb2, which
5224 # does not fit into this layout. The extension kp5 fits, but is not visible
5225 # to termcap applications. As an alternative, kbeg (which does have a termcap
5226 # equivalent) is provided.
5228 xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
5229 kbeg=\EOE, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo,
5230 kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp,
5233 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
5234 # Alternatively, the same scheme with old-style function keys as in xterm-r6
5235 # is shown here (because that is used in mrxvt and mlterm):
5236 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
5237 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
5238 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
5239 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
5240 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
5241 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
5242 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
5243 kf63=\E[13;4~, use=xterm+pcf2,
5245 xterm+acs|ISO-2022 alternate character-switching for xterm,
5246 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5247 enacs@, rmacs=\E(B, smacs=\E(0,
5249 # This chunk is used for building the VT220/Sun/PC keyboard variants.
5250 xterm-basic|modern xterm terminal emulator - common,
5251 OTbs, am, bce, mir, msgr, xenl, AX, XT,
5252 colors#8, cols#80, lines#24, pairs#64,
5253 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
5254 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
5255 dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5256 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5257 ich=\E[%p1%d@, ind=\n, is2=\E[!p\E[?3;4l\E[4l\E>,
5258 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, ri=\EM,
5259 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
5260 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
5261 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5262 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5264 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5266 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
5267 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5268 sgr0=\E(B\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
5269 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+csr, use=ansi+enq,
5270 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
5271 use=ansi+pp, use=ansi+sgrbold, use=xterm+kbs,
5272 use=xterm+alt+title, use=att610+cvis, use=xterm+acs,
5275 xterm+meta|meta mode for xterm,
5277 rmm=\E[?1034l, smm=\E[?1034h,
5279 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
5280 # In retrospect, something like xterm-r6 was intended here -TD
5281 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
5282 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
5286 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
5289 # If configured to support 88- or 256-colors (which is fairly common in 2009),
5290 # xterm also recognizes the control sequences for initc -TD
5291 xterm-16color|xterm with 16 colors like aixterm,
5293 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5294 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5295 use=xterm+osc104, use=ibm+16color, use=xterm-new,
5297 # 256-colors is a compile-time feature of XFree86 xterm beginning with
5298 # xterm patch #111 (1999/7/10) -TD
5299 xterm+256color|original xterm 256-color feature,
5301 colors#0x100, pairs#0x10000,
5302 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5303 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5305 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5307 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5311 # The semicolon separator used in xterm+256color does not follow the ECMA-48
5312 # standard. Since patch #282 (in 2012), xterm has supported both the legacy
5313 # subparameter separator (semicolon) and the standard (colon).
5315 # The xterm FAQ gives some of the history:
5316 # https://invisible-island.net/xterm/xterm.faq.html#color_by_number
5317 xterm+256color2|xterm 256-color feature,
5318 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48:
5320 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38:5
5324 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color
5325 # has the drawback that some of the xterm-alikes which use that building block
5326 # require a different approach to rs1 -TD
5327 xterm+osc104|reset color palette,
5328 oc=\E]104\007, rs1=\Ec\E]104\007,
5330 # palette is hardcoded...
5331 xterm+256setaf|xterm 256-color (set-only),
5333 colors#0x100, pairs#0x10000,
5334 initc@, op=\E[39;49m,
5335 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5337 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5341 # 88-colors is a compile-time feature of XFree86 xterm beginning with
5342 # xterm patch #115 (1999/9/18) -TD
5344 # Note that the escape sequences used are the same as for 256-colors - xterm
5345 # has a different table of default color resource values. If built for
5346 # 256-colors, it can still handle an 88-color palette by using the initc
5349 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
5350 # which support the xterm+256color feature support the associated initc
5351 # capability. So it is cancelled in the entries which use this and/or the
5352 # xterm+256color block.
5354 # The default color palette for the 256- and 88-colors are different. A
5355 # given executable will have one palette (perhaps compiled-in). If the program
5356 # supports xterm's control sequence, it can be programmed using initc.
5357 xterm+88color|original xterm 88-color feature,
5358 colors#88, pairs#7744, use=xterm+256color,
5360 xterm+88color2|xterm 88-color feature,
5361 colors#88, pairs#7744, use=xterm+256color2,
5363 # These variants of XFree86 3.9.16 xterm are built as a configure option.
5364 xterm-256color|xterm with 256 colors,
5365 use=xterm+osc104, use=xterm+256color, use=xterm-new,
5366 xterm-88color|xterm with 88 colors,
5367 use=xterm+osc104, use=xterm+88color,
5370 # Emacs 26.1 and later support direct color mode in terminals, using a
5371 # combination of user-defined capabilities and ncurses-dependent function
5372 # calls. We will not include that here.
5374 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
5375 # is of interest only to the numerically illiterate), is compatible with other
5376 # terminal descriptions written for curses. It relies upon the extended range
5377 # for numeric capabilities provided in ncurses 6.1:
5378 xterm+direct2|xterm with direct-color indexing (old building-block),
5380 colors#0x1000000, pairs#0x10000, CO#8,
5381 initc@, op=\E[39;49m,
5382 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2:%p1%{65536}%/%d:%p1%{256}
5383 %/%{255}%&%d:%p1%{255}%&%d%;m,
5384 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2:%p1%{65536}%/%d:%p1%{256}
5385 %/%{255}%&%d:%p1%{255}%&%d%;m,
5387 xterm-direct2|xterm with direct-color indexing (old),
5388 use=xterm+direct2, use=xterm+titlestack, use=xterm,
5390 # That in turn had a problem: in the original patch submitted for KDE konsole
5391 # in 2006, the submitter and the developer alike overlooked a "color space
5392 # identifier" parameter. This version provides for that parameter:
5393 xterm+direct|xterm with direct-color indexing (building-block),
5395 colors#0x1000000, pairs#0x10000, CO#8,
5396 initc@, op=\E[39;49m,
5397 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2::%p1%{65536}%/%d:%p1
5398 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5399 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2::%p1%{65536}%/%d:%p1
5400 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5402 xterm-direct|xterm with direct-color indexing,
5403 use=xterm+direct, use=xterm,
5405 # Here are corresponding flavors for terminals which could use the feature:
5406 iterm2-direct|iTerm2 with direct-color indexing,
5407 use=xterm+direct, use=iterm2,
5408 mlterm-direct|mlterm with direct-color indexing,
5409 use=xterm+direct, use=mlterm,
5411 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
5412 # that xterm's original implementation should have used colons for the
5413 # subparameter separators, but chose not to correct this in konsole. As of
5414 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
5415 xterm+indirect|xterm with direct-color indexing (old legacy building-block),
5417 colors#0x1000000, pairs#0x10000,
5418 initc@, op=\E[39;49m,
5419 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
5420 %/%{255}%&%d;%p1%{255}%&%d%;m,
5421 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
5422 %/%{255}%&%d;%p1%{255}%&%d%;m,
5424 konsole-direct|konsole with direct-color indexing,
5425 use=xterm+indirect, use=konsole,
5426 st-direct|simpleterm with direct-color indexing,
5427 use=xterm+indirect, use=st,
5428 vte-direct|VTE with direct-color indexing,
5429 use=xterm+indirect, use=vte,
5430 # reportedly in Apple's Mohave (fall 2018), but untested -TD
5431 nsterm-direct|nsterm with direct-color indexing,
5432 use=xterm+indirect, use=nsterm,
5434 # As for others (commenting at the time of release for ncurses 6.1):
5435 # + Apple's Terminal.app does not recognize either form of the direct-color
5437 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
5438 # the colors. Like vte, it is a subset of xterm, although different
5439 # omissions/reservations of modified-keys are seen in testing.
5440 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
5441 # nothing useful with the colors.
5442 # + Teraterm 4.97, like PuTTY (no good).
5443 # + terminology 0.91 recognizes xterm's original implementation, but does
5444 # nothing useful with it.
5446 # Reviewing after ncurses 6.2:
5447 # + Apple's Terminal.app is unchanged, has no support for direct color:
5448 # Catalina 10.15.5 Terminal.app 2.10 (433)
5449 # Mohave 10.14.6 - Terminal.app 2.9.5 (421.2)
5450 # + Cygwin's mintty 3.1.7 works with colon/semicolon
5451 # + PuTTY 0.73 works with semicolon
5452 # + Teraterm 4.105 works with semicolon
5453 # + terminology 1.7.0 works with colon/semicolon.
5455 # Other variants are possible, e.g., by using more of xterm's indexed color
5456 # palette, though the intrusion of indexed colors on the direct-color space
5457 # would be more noticeable.
5459 xterm+direct16|xterm with direct-color indexing (16-color building-block),
5461 setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48
5462 :2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&
5464 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%d%e38:
5465 2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
5467 setb@, setf@, use=xterm+direct,
5469 xterm-direct16|xterm with direct-colors and 16 indexed colors,
5470 use=xterm+direct16, use=xterm,
5472 xterm+direct256|xterm with direct-color indexing (256-color building-block),
5474 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
5475 %p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1
5476 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5477 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%?
5478 %p1%{256}%<%t38;5;%p1%d%e38:2::%p1%{65536}%/%d:%p1
5479 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5480 setb@, setf@, use=xterm+direct,
5482 xterm-direct256|xterm with direct-colors and 256 indexed colors,
5483 use=xterm+direct256, use=xterm,
5487 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
5488 # asked for some of xterm's advanced features to be added to its terminfo
5489 # entry. It defines extended capabilities not found in standard terminfo or
5490 # termcap. These are useful in tmux, for instance, hence the name.
5492 # One caveat in adding extended capabilities in ncurses is that if the names
5493 # are longer than two characters, then they will not be visible through the
5494 # termcap interface.
5496 # Ms modifies the selection/clipboard. Its parameters are
5497 # p1 = the storage unit (clipboard, selection or cut buffer)
5498 # p2 = the base64-encoded clipboard content.
5500 # Ss is used to set the cursor style as described by the DECSCUSR
5501 # function to a block or underline.
5502 # Se resets the cursor style to the terminal power-on default.
5504 # Cs and Cr set and reset the cursor colour.
5505 xterm+tmux|advanced xterm features used in tmux (cursor style 2),
5506 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
5507 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
5508 xterm+tmux2|advanced xterm features used in tmux,
5509 Cr=\E]112\E\\, Cs=\E]12;%p1%s\E\\,
5510 Ms=\E]52;%p1%s;%p2%s\E\\, Se=\E[ q, Ss=\E[%p1%d q,
5512 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
5513 # This is an 8-bit version of xterm, which emulates DEC VT220 with ANSI color.
5514 # To use it, your decTerminalID resource must be set to 200 or above.
5521 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
5522 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
5523 colors#8, cols#80, it#8, lines#24, pairs#64,
5524 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
5525 civis=\233?25l, clear=\233H\2332J,
5526 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
5527 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
5528 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
5529 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
5530 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
5531 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
5532 flash=\233?5h$<100/>\233?5l, home=\233H,
5533 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
5534 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
5535 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5537 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
5538 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
5539 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
5540 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
5541 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
5542 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
5543 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
5544 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
5545 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
5546 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
5547 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
5548 ri=\215, rmam=\233?7l, rmcup=\233?1049l, rmir=\2334l,
5549 rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\Ec,
5550 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5552 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
5553 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5554 %{6}%=%t3%e%p1%d%;m,
5555 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5556 %{6}%=%t3%e%p1%d%;m,
5557 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5558 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
5559 sgr0=\2330m\E(B, smam=\233?7h, smcup=\233?1049h,
5560 smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m,
5561 tbc=\2333g, u6=\233[%i%d;%dR, u8=\233[?%[;0123456789]c,
5562 vpa=\233%i%p1%dd, use=ansi+enq, use=xterm+acs,
5565 # Note: normally xterm supports modified function-keys as described in
5566 # XTerm - "Other" modified keys
5567 # https://invisible-island.net/xterm/modified-keys.html
5569 # However, xterm-hp, xterm-sco and xterm-sun assume no modifiers. Here is
5570 # a simple script which demonstrates these descriptions:
5572 # export TERM=xterm-$1
5578 # -xrm '*modifyCursorKeys:-1' \
5579 # -xrm '*modifyFunctionKeys:-1' \
5581 # e.g., "foo sun" if the script is named "foo" -TD
5582 xterm-hp|xterm with hpterm function keys,
5583 kclr=\EJ, kdch1=\EP, kend=\EF, khome=\Eh, kich1=\EQ, knp=\ES,
5584 kpp=\ET, use=hp+pfk-cr, use=vt52+arrows,
5585 use=xterm+nofkeys, use=xterm+nopcfkeys,
5587 xterm-sco|xterm with SCO function keys,
5588 kbeg=\E[E, kbs=^?, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
5589 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
5590 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
5591 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
5592 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
5593 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
5594 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
5595 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
5596 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
5597 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
5598 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
5599 use=ansi+arrows, use=xterm+nofkeys,
5601 # The xterm-new description has all of the features, but is not completely
5602 # compatible with VT220. If you are using a Sun or PC keyboard, set the
5603 # sunKeyboard resource to true:
5604 # + maps the editing keypad
5605 # + interprets control-function-key as a second array of keys, so a
5606 # 12-fkey keyboard can support VT220's 20-fkeys.
5607 # + maps numeric keypad "+" to ",".
5608 # + uses DEC-style control sequences for the application keypad.
5610 xterm-vt220|xterm emulating VT220,
5612 kcbt=\E[Z, kend=\E[4~, kf10=\E[21~, kf11=\E[23~,
5613 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5614 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5615 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5616 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kmous=\E[M, nel=\EE,
5617 use=xterm+app, use=xterm+edit, use=vt220+keypad,
5618 use=ecma+italics, use=ecma+index, use=ansi+rep,
5619 use=ecma+strikeout, use=xterm+focus, use=xterm+sm+1006,
5620 use=xterm+tmux, use=xterm+keypad, use=xterm-basic,
5622 xterm-vt52|xterm emulating DEC VT52,
5623 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5624 clear=\EH\EJ, rmacs=\EG, smacs=\EF, use=xterm+kbs,
5625 use=vt52+keypad, use=vt52-basic,
5627 xterm-noapp|xterm with cursor keys in normal mode,
5628 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
5631 xterm-24|vs100|xterms|xterm terminal emulator 24-line (X Window System),
5632 lines#24, use=xterm-old,
5634 # This is xterm for ncurses.
5635 xterm|xterm terminal emulator (X Window System),
5638 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
5639 # setting the vt100Graphics resource to false.
5640 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5643 # These building-blocks allow access to the X titlebar and icon name as a
5644 # status line. There are a few problems in using them in entries:
5646 # a) tsl should have a parameter to denote the column on which to transfer to
5648 # b) the "0" code for xterm updates both icon-title and window title. Some
5649 # window managers such as twm (and possibly window managers descended from
5650 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
5651 # don't want to mess with icon-name when using those window managers.
5652 # c) fsl ends the escape sequence begun by tsl. Printable characters between
5653 # those (probably) will appear in the window title. Nonprintable characters
5654 # may cause the escape sequence to end with an error.
5655 # d) the BEL (^G or \007) used in the original title-as-statusline came from
5656 # David J. MacKenzie's "pseudo-color" entry in 20 Apr 1995. At that time
5657 # xterm used BEL as the string-terminator rather than ST (\E\\). Either
5658 # BEL or ST has worked since xterm patch #28 in 1996, but most uses of
5659 # this feature have been embedded in shell scripts.
5661 # But that issue regarding the parameter for tsl means that applications may
5662 # not rely on it. The SVr4 documentation says tsl will "move to status line,
5663 # column #1". At the point in time when ESR added DJM's "pseudo-color" entry
5664 # with the split-up escape sequence for tsl/fsl, there were 65 entries using
5666 # 32 used a parameter, matching the documentation (including x10term).
5667 # 21 used a parameterless control, exiting from the status line on ^M.
5668 # 6 used parameterless controls for tsl and fsl
5669 # 6 used a split-up escape sequence, e.g., the same approach.
5671 # The extension "TS" is preferable, because it does not accept a parameter.
5672 # However, if you are using a non-extended terminfo, "TS" is not visible.
5673 xterm+sl|access X title line and icon name,
5675 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
5676 xterm+sl-twm|access X title line (pacify twm-descended window managers),
5678 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
5679 xterm+sl-alt|alternate access X title line,
5681 dsl=\E]2;\E\\, fsl=\E\\, tsl=\E]2;, TS=\E]2;,
5683 # In contrast, this block can be used for a DEC VT320 and up. There are two
5686 # DECSASD (select active status display)
5687 # \E[0$} Main display
5688 # \E[1$} Status line
5690 # DECSSDT (select status line type)
5691 # \E[0$~ No status line
5692 # \E[1$~ Indicator status line
5693 # \E[2$~ Host-writable status line
5695 # The building block assumes that the terminal always shows something at the
5696 # status line (either the indicator, or status line). That is because if no
5697 # status line is used, then the terminal makes that line part of the user
5698 # window, changing its size without notice.
5700 # Because there is no "esl" (enable status line) capability, the "tsl"
5701 # capability ensures that the status line is host-writable. A DEC terminal
5702 # will clear the status line when changing from indicator to host-writable
5705 # Once on the status line, the row part of cursor addressing is ignored. Since
5706 # tsl expects a parameter (to specify the column), the shortest addressing that
5707 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
5709 dec+sl|DEC VTxx status line,
5711 dsl=\E[0$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
5714 # The following xterm variants don't depend on your base version
5716 # xterm with bold instead of underline
5717 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
5718 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
5720 smso=\E[7m, smul=\E[1m, use=xterm-old,
5722 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
5723 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
5724 ich@, ich1@, use=xterm,
5725 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
5726 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
5727 rmcup@, smcup@, use=xterm,
5729 # https://invisible-island.net/xterm/xterm-paste64.html
5731 # Bracketed paste was introduced by xterm patch #203 in May 2005, as part of a
5732 # larger feature for manipulating the clipboard selection. Few terminals aside
5733 # from xterm fully implement the clipboard feature, but several copy this
5734 # detail. The names for the extended capabilities here were introduced by vim
5735 # in January 2017, but used internally. In 2023, vim patch 9.0.1117 is needed
5736 # to work with this change.
5737 bracketed+paste|xterm bracketed paste,
5738 BD=\E[?2004l, BE=\E[?2004h, PE=\E[201~, PS=\E[200~,
5740 # https://invisible-island.net/xterm/xterm.log.html#xterm_354
5742 # The response is a DSR sequence identifying the version: DCS > | text ST
5744 # ^[P>|XTerm(354)^[\
5745 report+version|Report xterm name and version (XTVERSION),
5746 XR=\E[>0q, xr=\EP>\\|[ -~]+\E\\\\, use=report+da2,
5748 # Vim uses RV to denote the secondary device attributes. Xterm documents the
5749 # - first parameter as the terminal type (extending it to VT100),
5750 # - the second as the patch number for xterm, and
5751 # - the third parameter as zero.
5752 # Other terminals may provide useful responses, though few are documented.
5753 report+da2|report secondary device attributes (DA2),
5754 RV=\E[>c, rv=\E\\[[0-9]+;[0-9]+;[0-9]+c,
5757 # The xterm mouse protocol is used by other terminal emulators.
5758 # In this section, two extended capabilities are used to illustrate the mouse
5759 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
5760 # enabling/disabling other mouse protocols. The "xm" capability describes the
5761 # mouse response; currently there is no interpreter which would use this
5762 # information to make the mouse support completely data-driven.
5764 # Here is the "original" xterm mouse protocol.
5766 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
5767 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
5768 # sequence", referring to the fact that it does not correspond to a "real"
5769 # terminal. The mouse responses for the X10 protocol are sent only for
5771 xterm+x10mouse|X10 xterm mouse protocol,
5772 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
5773 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
5774 xterm-x10mouse|X10 xterm mouse,
5775 use=xterm+x10mouse, use=xterm,
5777 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
5780 # The mouse responses for the X11 protocol covered button releases, as well as
5783 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
5786 # The modifiers are not reflected in this description because as used in xterm
5787 # they are normally inaccessible because the translations resources assign
5788 # shift and control to other features. However, they are important because
5789 # they take up space in the first byte of the response. The other bits of this
5790 # byte are used to encode the button number for both presses and releases.
5791 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
5792 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
5793 # provide additional features, e.g., wheel mouse.
5795 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
5796 # "t" or "T", which was activated by double-clicking. The "t" response was
5797 # used when the starting/ending positions were the same.
5799 # X11R3 (February 1988) added the highlight/tracking mode.
5801 # X11R4 (December 1989) added the control sequences document, listing the
5802 # control sequences for the X10/X11 protocols without descriptions. It also
5803 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
5804 # X11 protocol as "DEC VT200 compatible", although DEC offered no such terminal.
5806 # X11R5 (November 1993) gave a description of the mouse protocol.
5808 # X11R6 (January 1995) moved the control sequences document out of the xterm
5809 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
5810 # no new information.
5811 xterm+x11mouse|X11 xterm mouse protocol,
5812 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
5813 xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c,
5814 xterm-x11mouse|X11 mouse,
5815 use=xterm+x11mouse, use=xterm,
5817 # Here is a suggested description of the xterm highlighting protocol.
5818 # A more complicated example could be constructed to account for the "t"
5820 xterm+x11hilite|X11 xterm mouse protocol with highlight,
5821 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
5822 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
5824 xterm-x11hilite|X11 mouse with highlight,
5825 use=xterm+x11mouse, use=xterm,
5827 # The preceding were the sources from X Consortium. Other sources (or patches)
5828 # were available. Starting in mid-1995, XFree86 developers collected some of
5829 # those changes and began improvements, e.g., to support color. This was, by
5830 # the way, around the same time that rxvt developers began implementing color,
5831 # though dates (and attributions) are not well documented. I became interested
5832 # in xterm in late 1995, and involved in early 1996. To complete the picture,
5833 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
5835 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
5836 # "any-event" mouse mode.
5838 # These building blocks incorporate later features as well:
5839 # xterm patch #224 (2007/2/11) added private mode 1004, for enabling/disabling
5840 # focus in/out event reporting.
5841 # xterm patch #277 (2012/01/07) added private mode 1006
5843 xterm+sm+1002|xterm any-button mouse,
5844 kmous=\E[<, XM=\E[?1006;1004;1002%?%p1%{1}%=%th%el%;,
5845 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5847 xterm-1002|example of xterm any-button mouse,
5848 use=xterm+sm+1002, use=xterm,
5850 xterm+sm+1003|xterm any-event mouse,
5851 XM=\E[?1006;1004;1003%?%p1%{1}%=%th%el%;,
5853 xterm-1003|example of xterm any-event mouse,
5854 use=xterm+sm+1003, use=xterm,
5856 # Some terminal emulators implement xterm focus in/out, but do it incorrectly,
5857 # interfering with user applications.
5858 # https://lists.gnu.org/archive/html/bug-ncurses/2023-10/msg00087.html
5859 xterm+focus|xterm focus-in/out event "keys",
5861 fd=\E[?1004l, fe=\E[?1004h, kxIN=\E[I, kxOUT=\E[O,
5863 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5866 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5867 # dropping support for the X11 mouse protocol's shift-modifier and using
5868 # available bits in the first byte of the response to encode buttons 4 and 5.
5869 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5870 # older configurations which might have used the obsolete modifiers.
5872 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5873 # where the coordinates in the mouse response would be encoded in UTF-8,
5874 # thereby extending the range of coordinates past 222=(255-33). This is the
5875 # "1005" mouse mode.
5876 xterm+sm+1005|xterm UTF-8 mouse (building block),
5877 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5878 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5879 xterm-1005|xterm UTF-8 mouse,
5880 use=xterm+sm+1005, use=xterm,
5882 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5883 # SGR-style parameters.
5885 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5886 # (By the way, this is a problem with the X11 protocol). A more plausible
5887 # criticism is that the responses provided by the 1005 mode are not distinct
5888 # from the non-1005 responses.
5890 # As an alternative (and fixing the longstanding limitation of X11 mouse
5891 # protocol regarding button-releases), I provided the 1006 mode, referring
5892 # to it as "SGR 1006" since the replies resemble the SGR control string:
5893 xterm+sm+1006|xterm SGR-mouse (building block),
5894 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5895 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5896 xterm-1006|xterm SGR-mouse,
5897 use=xterm+sm+1006, use=xterm,
5899 # Some terminal emulators implement xterm focus in/out, but do it incorrectly,
5900 # interfering with user applications.
5901 # https://lists.gnu.org/archive/html/bug-ncurses/2023-10/msg00087.html
5902 oldxterm+sm+1006|xterm SGR-mouse (building block),
5903 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5904 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5907 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5908 # (kterm should not invoke DEC Graphics as the alternate character set
5909 # -- Kenji Rikitake)
5910 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5911 # -- MATSUMOTO Shoji)
5912 # kterm implements acsc via built-in table of X Drawable's
5913 kterm|kterm kanji terminal emulator (X window system),
5916 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, enacs=,
5917 rmacs=\E(B, rmam=\E[?7l,
5918 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5920 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, use=x10term+sl,
5921 use=xterm-r6, use=ecma+color,
5922 kterm-color|kterm-co|kterm with ANSI colors,
5923 ncv@, use=kterm, use=ecma+color,
5927 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5928 # variant of xterm which is apparently no longer supported, but are interesting
5929 # because they illustrate SVr4 curses mouse controls - T.Dickey
5930 xtermm|xterm terminal emulator (monochrome),
5931 OTbs, am, km, mir, msgr, xenl,
5932 btns#3, cols#80, it#8, lines#24,
5933 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5934 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cud1=\n,
5935 dch=\E[%p1%dP, dch1=\E[P, el1=\E[1K$<3>, enacs=\E(B\E)0,
5936 getm=\E[%p1%dY, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5937 ind=\n, kend=\E[Y, kf0=\EOy, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
5938 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H,
5939 kmous=\E[^_, knp=\E[U, kpp=\E[V, reqmp=\E[492Z, rev=\E[7m,
5940 ri=\EM, rmacs=^O, rmcup=\E@0\E[?4r,
5941 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5942 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5943 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5944 %;m%?%p9%t\016%e\017%;,
5945 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5946 tbc=\E[3g, use=ansi+apparrows, use=ansi+csr,
5947 use=ansi+cup, use=ansi+erase, use=ansi+idl,
5948 use=ansi+local, use=ansi+sgrso, use=decid+cpr,
5951 xtermc|xterm terminal emulator (color),
5954 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5956 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5958 use=xtermm, use=klone+color,
5960 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5961 # Here's a termcap entry I've been using for xterm_color, which comes
5962 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5963 # color stuff, I also have a status line defined as the window manager
5964 # title bar. [I have translated it to terminfo -- ESR]
5965 xterm-pcolor|xterm with color used for highlights and status line,
5967 bold=\E[1;43m, rev=\E[7;34m,
5968 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5969 %t;7;31%;%?%p3%t;7;34%;m,
5970 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5972 # This was mentioned
5973 # http://unix.stackexchange.com/questions/119/colors-in-man-pages
5975 # http://nion.modprobe.de/blog/archives/569-colored-manpages.html
5976 # (blog posting by Nico Golde, June 24 2007)
5978 # https://web-beta.archive.org/web/20070921042430/http://nion.modprobe.de/mostlike.txt
5979 # The comment hints where it started, but there are differences:
5980 # Reconstructed via infocmp from file: /usr/share/terminfo/x/xterm-pcolor
5981 mostlike|manpages with color looking like most,
5984 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H,
5985 meml@, memu@, rev=\E[7m\E[34m,
5986 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sgr@,
5987 smso=\E[1;30m\E[47m, smul=\E[32m, TS@, use=xterm-pcolor,
5989 # This describes the capabilities of color_xterm, an xterm variant from
5990 # before ECMA-48 color support was folded into the main-line xterm release.
5991 # This entry is straight from color_xterm's maintainer.
5992 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5993 # The README's with the distribution also say that it supports SGR 21, 24, 25
5994 # and 27, but they are not present in the terminfo or termcap.
5995 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5996 OTbs, am, km, mir, msgr, xenl, XT,
5997 cols#80, it#8, lines#65, ncv@,
5998 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5999 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
6000 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P, ed=\E[J,
6001 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
6002 ich=\E[%p1%d@, ind=\n, is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l,
6003 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6004 kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
6005 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6006 khome=\E[7~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6007 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
6008 rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6009 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
6010 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6011 %;m%?%p9%t\016%e\017%;,
6012 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
6013 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
6014 smul=\E[4m, use=ansi+apparrows, use=ansi+csr,
6015 use=ansi+idl, use=ansi+local, use=decid+cpr,
6016 use=ecma+color, use=vt220+keypad,
6018 # The IRAF source has a terminfo using "xterm-r5", but line-drawing does not
6019 # work in that case. This entry uses xterm+acs, to work around that problem.
6021 # Home/end keys do not work, due to a bug in the X Consortium xterm on which
6024 # https://invisible-island.net/xterm/xterm.faq.html#bug_xterm_r6
6026 # Comparing to the X11R5 source, xgterm has dynamic and ANSI colors (probably
6027 # not bce). It interchanges mouse buttons 2/3 for menus.
6029 # It also has a few features found in later versions of xterm:
6030 # - vi-button and dired-button,
6031 # - i18n stuff like X11R6.
6032 # - colorBD, colorUL
6035 # Debian provides a package for xgterm (and iraf). Although the source for
6036 # xgterm implements the control-sequences for ANSI color, the packaged xgterm
6037 # does nothing with those, even after installing the app-defaults file which
6038 # was overlooked by the Debian packager.
6039 xgterm|graphic terminal for IRAF,
6040 enacs=\E(B\E)0, rmacs=^O,
6041 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6043 sgr0=\E[m\017, smacs=^N, use=xterm+acs, use=xterm-r5,
6046 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
6047 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
6048 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
6049 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
6050 # that each of those implements the home, end, delete keys differently.
6052 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
6053 # colors; note that this is not compatible with the 5.2 version.
6054 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
6055 # match XFree86's xterm.terminfo usage and prevent circular links
6056 xterm-color|nxterm|generic color xterm,
6058 op=\E[m, use=xterm-r6, use=klone+color,
6060 # This entry describes an xterm with Sun-style function keys enabled
6061 # via the X resource setting "xterm*sunFunctionKeys:true"
6062 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
6063 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
6064 # because we want it to be seen as <kcpy>.
6065 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
6066 # with their Sun keyboard labels instead.
6067 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
6068 xterm-sun|xterm with sunFunctionKeys true,
6069 kb2=\E[218z, kcpy=\E[197z, kdch1=\E[3z, kend=\E[220z,
6070 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
6071 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
6072 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
6073 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
6074 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
6075 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
6076 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
6077 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
6078 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
6079 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
6080 use=xterm+kbs, use=ansi+apparrows, use=xterm+nofkeys,
6081 use=xterm+nopcfkeys,
6083 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
6087 # this describes the alpha-version of GNOME terminal shipped with Redhat 6.0
6088 gnome-rh62|GNOME terminal,
6090 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6091 use=linux+kbs, use=xterm-color,
6093 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
6095 # This implements a subset of VT102 with a random selection of features from
6096 # other terminals such as color and function-keys.
6098 # shift-f1 to shift-f10 are f11 to f20
6100 # NumLock changes the application keypad to approximate VT100 keypad, except
6101 # that there is no escape sequence matching comma (,).
6103 # Other defects observed:
6104 # vt100 LNM mode is not implemented.
6105 # vt100 80/132 column mode is not implemented.
6106 # vt100 DECALN is not implemented.
6107 # vt100 DECSCNM mode is not implemented, so flash does not work.
6108 # vt100 TBC (tab reset) is not implemented.
6109 # xterm alternate screen controls do not restore cursor position properly
6110 # it hangs in tack after running function-keys test.
6111 gnome-rh72|GNOME Terminal in RedHat 7,
6113 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
6114 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
6116 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis,
6117 use=linux+kbs, use=xterm-color,
6119 # GNOME Terminal 2.0.1 (Redhat 8.0)
6121 # Documentation now claims it implements VT220 (which is demonstrably false).
6122 # However, it does implement ECH, which is a VT220 feature. And there are
6123 # workable VT100 LNM, DECALN, DECSNM modes, making it possible to display
6124 # more of its bugs using vttest.
6126 # However, note that bce and msgr are broken in this release. Tabs (tbc and
6127 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
6129 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
6130 # operations. Shift-tab generates a distinct sequence so it can be argued
6131 # that it implements kcbt.
6132 gnome-rh80|GNOME Terminal in RedHat 8,
6134 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kcbt=\E^I,
6135 op=\E[39;49m, use=gnome-rh72,
6137 # GNOME Terminal 2.2.1 (Redhat 9.0)
6139 # bce and msgr are repaired.
6140 gnome-rh90|GNOME Terminal in RedHat 9,
6142 hpa=\E[%i%p1%dG, kLFT=\EO2D, kRIT=\EO2C, kb2=\E[E,
6143 kcbt=\E[Z, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+pcf0,
6144 use=xterm+pcfkeys, use=gnome-rh80,
6146 # GNOME Terminal 2.14.2 (Fedora Core 5)
6147 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
6148 gnome-fc5|GNOME Terminal in Fedora Core 5,
6150 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
6152 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
6154 # GNOME Terminal 2.18.1 (2007 snapshot)
6156 # For any "recent" version of gnome-terminal, it is futile to attempt to
6157 # support modifiers on cursor- and keypad keys because the program usually
6158 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
6159 # of the keys (which more/less correspond to the termcap values), and will
6160 # interpret those according to the $TERM value, but others not in the
6161 # terminfo according to some constantly changing set of hacker guidelines -TD
6162 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
6163 use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5,
6164 gnome-2007|GNOME Terminal snapshot 2.18.1,
6167 # GNOME Terminal 2.22.3 (2008 snapshot)
6169 # In vttest, it claims to be a VT220 with national replacement character-sets,
6170 # but aside from the identifier string, implements only a small fraction of
6171 # VT220's behavior, which will make it less usable on a VMS system (unclear
6172 # what the intent of the developer is, since the NRC feature exposed in vttest
6173 # by this change does not work).
6174 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
6175 use=vte+pcfkeys, use=vte-2007,
6176 gnome-2008|GNOME Terminal snapshot 2.22.3,
6179 # GNOME Terminal 3.6.0 (2012)
6180 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
6181 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
6184 # Testing with tack shows that flash does not/has not worked -TD
6185 vte-2012|VTE 0.34.1,
6187 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
6188 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
6189 %|%t;7%;m%?%p9%t\016%e\017%;,
6190 use=ecma+italics, use=vte-2008,
6191 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
6192 # 61 differences from a correct entry for gnome terminal.
6193 gnome-2012|GNOME Terminal 3.6.0,
6196 # Before 2008, GNOME terminal could automatically use the contents of the
6197 # "xterm" terminfo to supply key information which is not built into the
6198 # program. With 2.22.3, this list was built into the program (which addressed
6199 # the inadvertent use of random terminfo data, though using a set of values
6200 # which did not correspond to any that xterm produced - still not solving the
6201 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
6203 # terminfo modifier code keys
6204 # kf13-kf24 shift 2 F1 to F12
6205 # kf25-kf36 control 5 F1 to F12
6206 # kf37-kf48 shift/control 6 F1 to F12
6207 # kf49-kf60 alt 3 F1 to F12
6208 # kf61-kf63 shift-alt 4 F1 to F3
6210 # The parameters with \EO (SS3) are technically an error, since SS3 should have
6211 # no parameters. This appears to be rote copying based on xterm+pcc0.
6212 vte+pcfkeys|VTE's variation on xterm+pcfkeys (building block),
6213 kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, kf16=\EO1;2S,
6214 kf25=\EO1;5P, kf26=\EO1;5Q, kf27=\EO1;5R, kf28=\EO1;5S,
6215 kf37=\EO1;6P, kf38=\EO1;6Q, kf39=\EO1;6R, kf40=\EO1;6S,
6216 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
6217 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
6219 gnome+pcfkeys|GHOME Terminal's variation on xterm+pcfkeys (building block),
6222 # deprecated - use "vte" for newer versions
6223 gnome|GNOME Terminal,
6225 gnome-256color|GNOME Terminal with xterm 256-colors,
6226 use=xterm+256color, use=gnome,
6228 # relevant changes were made in January 2014, and later.
6230 # Originally VTE was promoted as a library able to emulate any terminal by
6231 # reading its terminal description. In practice, that never got beyond the
6232 # ability to read definitions of special keys (function-, editing-, cursor).
6234 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
6235 # of a termcap file derived from xterm). That was incomplete because it did
6236 # not have any of the modifier-key information used for xterm's function-,
6237 # editing-, and cursor-keys. Having its own reader was unnecessary since
6238 # ncurses provides that information; used since xterm patch #225 in 2007.
6240 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
6241 # gnome #730137) dealt with attempts to recast that termcap reader as library
6242 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
6243 # abandoning that and finally constructing a table to match xterm's default
6244 # behavior, e.g., for "xterm+pcfkeys".
6245 vte-2014|VTE 0.35.1,
6247 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
6248 ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
6249 use=oldxterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
6250 use=bracketed+paste,
6252 # As of January 2018, this was the most recent release,
6253 # e.g., with gnome-terminal 3.26.2
6254 vte-2017|VTE 0.50.2,
6255 E3=\E[3J, use=ecma+strikeout, use=vte-2014,
6257 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
6258 # late in 2017 for changing the appearance of underlines, which was
6259 # incorporated into Debian and Fedora testing-packages in February and March
6260 # 2018, respectively. Overline (Smol/Rmol) has been supported since December
6262 vte-2018|VTE 0.51.2,
6264 blink=\E[5m, enacs=\E(B\E)0, nel=\EE,
6265 rep=%p1%c\E[%p2%{1}%-%db,
6266 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;
6267 8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
6268 Rmol=\E[55m, Se=\E[1 q, Smol=\E[53m, Smulx=\E[4:%p1%dm,
6269 use=xterm+alt+title, use=xterm+tmux, use=kitty+setal,
6272 # Summarizing as of March 2022, these terminfo-capabilities of xterm are
6274 # - DEC application keypad mode
6275 # - DEC-compatible status-line
6276 # - DEC left/right margin support
6277 # - DEC printer controls
6278 # - AT&T cursor-blinking
6279 # - meta mode, as documented in terminfo(5)
6280 # - xterm's extension to clear scrollback
6281 vte|VTE aka GNOME Terminal,
6284 vte-256color|VTE with xterm 256-colors,
6285 use=xterm+256color, use=vte,
6287 # XFCE Terminal 0.2.5.4beta2
6289 # This is based on some of the same source code, e.g., the VTE library, as
6290 # gnome-terminal, but has fewer features, fails more screens in vttest.
6291 # Since most of the terminfo-related behavior is due to the VTE library,
6292 # the terminfo is the same as gnome-terminal.
6300 # A terminal written in JavaScript, which can provide xterm-like terminal
6301 # emulation in a browser such as Google Chrome, or in Chome OS.
6303 # https://chromium.googlesource.com/apps/libapps/+/master/nassh/doc/FAQ.md
6305 # Tested with Secure Shell App version 0.39 in Chrome 89.0.4389.90, found that
6306 # the numeric keypad escapes are missing -TD
6307 hterm|Chromium hterm,
6310 kcbt=\E[Z, kent=\EOM, nel=\EE, use=linux+kbs,
6311 use=xterm+osc104, use=ecma+index, use=ansi+rep,
6312 use=ecma+strikeout, use=vt420+lrmm, use=xterm+focus,
6313 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics,
6314 use=xterm+pcfkeys, use=xterm-basic,
6315 use=bracketed+paste,
6316 hterm-256color|Chromium hterm with xterm 256-colors,
6317 use=xterm+256color2, use=hterm,
6321 # https://github.com/thestinger/termite
6323 # A review requires install of Arch Linux since Fedora and Debian don't have
6324 # this program. It uses "vte3-ng" (a conflicting package), which is here:
6325 # https://github.com/thestinger/vte-ng
6326 # which (based on the default branch setting) seems to be a fork of vte
6327 # 0.48.2, and is noted as such in Arch:
6328 # https://aur.archlinux.org/packages/vte3-ng/
6329 # It won't be merged:
6330 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
6331 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
6332 # but perhaps made obsolete.
6334 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
6335 # was mostly cut/paste from xterm-256color, but since VTE does not actually
6336 # implement several of the features in that terminal description, this one is
6337 # trimmed to eliminate those. Also, since it is a slightly older version of
6338 # VTE, it lacks a few more features (again, trimmed).
6339 termite|VTE-based terminal,
6340 am, km, mir, msgr, npc, xenl,
6341 cols#80, lines#24, ncv@,
6342 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6344 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
6345 cup=\E[%i%p1%d;%p2%dH, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6346 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
6347 hpa=\E[%i%p1%dG, ind=\n, invis=\E[8m,
6348 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
6349 kent=\EOM, kmous=\E[M, rev=\E[7m, ri=\EM, rmacs=\E(B,
6350 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
6351 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
6352 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6354 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
6355 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, use=ansi+csr,
6356 use=ansi+enq, use=ansi+idc, use=ansi+idl,
6357 use=ansi+inittabs, use=ecma+index, use=ecma+italics,
6358 use=ansi+local, use=xterm+alt1049, use=xterm+256color,
6359 use=ecma+color, use=vt220+cvis, use=xterm+pcfkeys,
6363 # Multi-GNOME-Terminal 1.6.2
6365 # This does not use VTE, and does have different behavior (compare xfce and
6367 mgt|Multi GNOME Terminal,
6368 use=ecma+index, use=xterm-xf86-v333,
6371 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
6372 # or not is debatable).
6375 kdch1=^?, kend=\E[F, khome=\E[H, use=linux+kbs,
6378 # Konsole 1.0.1 (2001/11/25)
6379 # (formerly known as kvt)
6381 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
6382 # simplify this entry (and point out why konsole isn't xterm), we base this on
6383 # xterm-r6. The default keyboard appears to be 'linux'.
6386 # a) konsole implements several features from XFree86 xterm, though none of
6387 # that is documented - except of course in its source code - apparently
6388 # because its implementors are unaccustomed to reading documentation - as
6389 # evidenced by the sparse and poorly edited documentation distributed with
6390 # konsole. Some features such as the 1049 private mode are recognized but
6391 # incorrectly implemented as a duplicate of the 47 private mode.
6392 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
6393 # sends PC-style escapes rather than VT100.
6394 # c) fails vttest menu 3 (Test of character sets) because it does not properly
6395 # parse some control sequences. Also fails vttest Primary Device Attributes
6396 # by sending a bogus code (in the source it says it's supposed to be a
6397 # VT220, which is doubly incorrect because it does not implement VT220
6398 # control sequences except for a few special cases). Treat it as a
6399 # mildly-broken VT102.
6401 # Update for konsole 1.3.2:
6402 # The 1049 private mode works (but see the other xterm screens in vttest).
6403 # Primary Device Attributes now returns the code for a VT100 with advanced
6404 # video option. Perhaps that's intended to be a "mildly-broken Vt102".
6406 # Updated for konsole 1.6.4:
6407 # add konsole-solaris
6409 # Updated for konsole 1.6.6:
6410 # add control-key modifiers for function-keys, etc.
6412 # Updated for konsole 2.3 (October 2008):
6413 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
6414 # different from xterm (and VT100's). They have the same behavior in
6415 # this detail, but it is unclear which copies the other.
6417 # Deferred update for konsole 2.10 (late 2012):
6418 # add SGR 1006 mouse
6420 # Updated for konsole 2.12.4 (late 2013):
6423 # Updated for konsole 16.07 (mid 2016):
6424 # add dim, invis, strikeout
6425 # (also overline, which is too rarely used to provide as an extension)
6427 # Updated for konsole 17.12.0 (late 2017):
6429 # Re-enable "bel", since it is latent in the source-code even though KDE config
6430 # often hides the feature (2020/5/30)
6431 konsole-base|KDE console window (common),
6434 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
6435 hpa=\E[%i%p1%dG, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@,
6436 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@,
6437 kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@,
6438 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6439 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
6440 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6441 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6442 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
6443 use=ansi+sgrdim, use=ecma+index, use=xterm+focus,
6444 use=xterm+sm+1006, use=ecma+strikeout,
6445 use=ecma+italics, use=ecma+color, use=xterm-r6,
6446 use=vt220+cvis, use=bracketed+paste,
6449 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
6450 # "vt100" key-table files along with a compiled-in default key-table.
6452 # The main difference between the two keytabs was that the developer equated
6453 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
6454 # that. For the same reason, the home/end keys differ. A VT100 had none of
6455 # that. The otherwise identical keytabs have definitions to model the VT52
6456 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
6458 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
6459 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
6460 # dropped from the install in June 2008.
6462 # The default keytab added in January 2000 was originally titled "X11 R6",
6463 # and likewise retitled to "XFree 4".
6465 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
6466 # and changing backspace to ^H, removing that keytab's attempt to model the
6467 # VT100 keypad and VT52 (KDE #20459).
6469 # The developers made changes to the default and linux keytabs. Comparing
6470 # the original and 2018 versions using diffstat:
6471 # default: 119 added, 147 deleted, 28 unchanged
6472 # linux: 47 added, 28 deleted, 104 unchanged
6474 # Most of the change for the default keytab was to make konsole act more like
6475 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
6476 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
6477 # made an external file (like "linux" and "solaris"), and some further
6478 # refinement made. But there are still flaws in the scheme.
6480 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
6481 # Shift into a placeholder in the table entries. That works well if all of the
6482 # modified keys are modified in the same way. But xterm does not do that. The
6483 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
6484 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
6485 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
6486 # kf14: '\E[1;2Q', '\EO2Q'.
6488 # In effect, a quarter of konsole's function-keys are different from xterm.
6490 # It is not a simple blunder:
6491 # a) xterm patch #121 (November 1999), providing the first version of the
6492 # PC-style modifiers would send \EO2Q
6493 # b) xterm patch #216 (July 2006) amended this and other details, provided
6494 # better documentation for the modifiers and made the behavior configurable,
6495 # e.g., using the modifyFunctionKeys resource. The reason why it sends
6496 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
6497 # changelog points this out as "avoid sending SS3 with parameters".
6498 # c) That came after AnyMod was introduced, but still early enough that one
6499 # might expect konsole's developers to followup. Twelve years later that
6500 # has yet to happen.
6502 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
6504 konsole-linux|KDE console window with Linux keyboard,
6505 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
6506 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
6507 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6508 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
6509 konsole-solaris|KDE console window with Solaris keyboard,
6510 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6512 # Obsolete: x11r5.keymap
6513 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
6514 # terminfo at the time rather than testing the code.
6515 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
6516 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6518 # The value for kbs (see konsole-vt100) reflects local customization rather
6519 # than the settings used for XFree86 xterm.
6520 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
6521 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
6524 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
6525 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
6528 # Obsolete: vt100.keymap
6529 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
6530 # it is still useful for deriving the other entries, since the developer
6531 # provided function-keys based on xterm.
6532 konsole-vt100|KDE console window with VT100 (sic) keyboard,
6533 kend=\E[F, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6534 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
6535 kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
6536 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
6539 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
6540 # September 2008 and removed in June 2016. The developer who removed it stated
6541 # that it was never installed.
6542 konsole-vt420pc|KDE console window with VT420 PC keyboard,
6543 kbs=^H, kdch1=^?, use=konsole-vt100,
6545 # make a default entry for konsole
6546 konsole|KDE console window,
6549 # These were written for ncurses:
6550 konsole-16color|klone of xterm-16color,
6551 ncv#32, use=ibm+16color, use=konsole,
6552 konsole-256color|KDE console window with xterm 256-colors,
6553 use=xterm+256setaf, use=konsole,
6556 # https://github.com/arakiken/mlterm
6558 mlterm|multi lingual terminal emulator,
6561 # Tested mlterm 3.9.0 (2020/09/19):
6563 # - has blinking text
6565 # - has invisible-text
6567 # - has crossed-out text
6568 # - does not support palette reset with OSC 104
6569 # - testing the function-keys is difficult because the terminal is
6570 # preconfigured to set many of the modified keys to special functions, e.g.,
6571 # - shift-F1 and shift-F2 are bound to a split-screen feature
6572 # - control-F1 and control-F2 is bound to a new-terminal feature
6574 # - primary response says it is a VT340 (ReGIS and Sixel).
6575 # - has partial support for double-size characters.
6576 # - character-set tests do not work.
6577 # - DEC locator works.
6578 # - 1006-mouse works.
6579 # - focus-events do not work reliably.
6580 # - numeric keypad escapes do not work.
6581 # - back-color erase works
6583 # - title-stack works.
6584 # - doesn't respond to 8-bit controls.
6585 # - 256-color palette initializing works.
6586 # - DECSTR soft-reset is documented.
6588 # Tested mlterm 3.3.8 (2018/01/21):
6589 # found xterm+sm+1006 did not work with version 3.3.8
6590 # soft-reset DECSTR is in sources since 2017/09/19.
6592 # Tested mlterm 3.2.2 (2014/03/22):
6593 # mlterm 3.x made further changes, but they were not reflected in the included
6594 # mlterm.ti (which was dropped in 2015). This entry has been based on testing
6595 # with ncurses, tack and vttest -TD
6596 mlterm3|multi lingual terminal emulator 3.x,
6598 blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
6599 is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
6600 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%?
6601 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
6602 use=ansi+enq, use=ansi+rep, use=ecma+italics,
6603 use=ecma+strikeout, use=xterm+app, use=xterm+pcf2,
6604 use=xterm+pcc2, use=xterm+pce2, use=xterm+meta,
6605 use=xterm+alt+title, use=xterm+sm+1006,
6606 use=vt100+pfkeys, use=bracketed+paste, use=mlterm2,
6609 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
6611 # It is nominally a VT102 emulator, with features borrowed from rxvt and
6614 # The function keys are numbered based on shift/control/alt modifiers, except
6615 # that the control-modifier itself is used to spawn a new copy of mlterm (the
6616 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
6617 # how it is configured.
6619 # kf1 to kf12 \E[11~ to \E[24~
6620 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
6621 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
6622 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
6623 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
6624 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
6625 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
6626 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
6628 mlterm2|multi lingual terminal emulator 2.x,
6629 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
6630 colors#8, cols#80, lines#24, pairs#64,
6631 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6632 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
6633 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
6634 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
6635 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ind=\n,
6636 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
6637 kcbt=\E[Z, kend=\EOF, kent=\EOM, kind=\EO1;2B, kmous=\E[M,
6638 kri=\EO1;2A, mc0=\E[i, nel=\EE, op=\E[39;49m, rev=\E[7m,
6639 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
6640 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6641 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
6642 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6643 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
6645 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
6646 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u8=\E[?1;2c,
6647 vpa=\E[%i%p1%dd, use=ansi+apparrows, use=ansi+csr,
6648 use=ansi+enq, use=ansi+idl, use=ansi+inittabs,
6649 use=ansi+local, use=vt220+vtedit, use=xterm+alt1049,
6650 use=ecma+index, use=mlterm+pcfkeys, use=vt220+cvis,
6653 # The insert/delete/home/end keys do not respond to modifiers because mlterm
6654 # looks in its termcap to decide which string to send. If it used terminfo
6655 # (when available), it could use the extended names introduced for xterm.
6656 mlterm+pcfkeys|mlterm fragment for PC-style fkeys,
6657 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
6658 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
6659 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
6660 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
6661 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
6662 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
6663 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
6664 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
6665 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
6667 mlterm-256color|mlterm 3.0 with xterm 256-colors,
6668 use=xterm+256color, use=mlterm,
6671 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
6672 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
6675 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
6676 # but some applications don't work with that.
6677 # It also has an AIX extension
6681 # but the latter does not work correctly.
6683 # The distributed terminfo says it implements hpa and vpa, but they are not
6684 # implemented correctly, using relative rather than absolute positioning.
6686 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
6687 # Since rxvt is not really compatible with xterm, it should be configured as
6688 # "rxvt" or "rxvt-color".
6690 # removed dch/dch1 because they are inconsistent with bce/ech -TD
6691 # remove km as per tack test -TD
6692 rxvt-basic|rxvt terminal base (X Window System),
6693 OTbs, bce, eo, mir, xenl, xon, XT,
6694 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cub1=^H, cud1=\n,
6695 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, el1=\E[1K,
6696 flash=\E[?5h$<100/>\E[?5l, ich=\E[%p1%d@,
6697 is1=\E[?47l\E=\E[?1l,
6698 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
6699 kcbt=\E[Z, kmous=\E[M, rev=\E[7m, ri=\EM, rmir=\E[4l,
6700 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
6701 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6702 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6704 s0ds=\E(B, s1ds=\E(0,
6705 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6707 sgr0=\E[0m\017, smir=\E[4h, smkx=\E=, smso=\E[7m,
6708 smul=\E[4m, use=ansi+csr, use=ansi+idl, use=ansi+local,
6709 use=xterm+alt47, use=vt100+enq, use=vt100+4bsd,
6710 use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
6712 # Key Codes from rxvt reference:
6714 # Note: Shift + F1-F10 generates F11-F20
6716 # For the keypad, use Shift to temporarily override Application-Keypad
6717 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
6718 # is off, escape sequences toggle Application-Keypad setting.
6719 # Also note that values of Home, End, Delete may have been compiled
6720 # differently on your system.
6722 # Normal Shift Control Ctrl+Shift
6723 # Tab ^I ESC [ Z ^I ESC [ Z
6724 # BackSpace ^H ^? ^? ^?
6725 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
6726 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
6727 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6728 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
6729 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
6730 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
6731 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
6732 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
6733 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6734 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
6735 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
6736 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
6737 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
6738 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
6739 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
6740 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
6741 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
6742 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
6743 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
6744 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
6745 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
6746 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
6747 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
6748 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
6749 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
6750 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
6751 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
6752 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
6753 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
6756 # Up ESC [ A ESC [ a ESC O a ESC O A
6757 # Down ESC [ B ESC [ b ESC O b ESC O B
6758 # Right ESC [ C ESC [ c ESC O c ESC O C
6759 # Left ESC [ D ESC [ d ESC O d ESC O D
6760 # KP_Enter ^M ESC O M
6761 # KP_F1 ESC O P ESC O P
6762 # KP_F2 ESC O Q ESC O Q
6763 # KP_F3 ESC O R ESC O R
6764 # KP_F4 ESC O S ESC O S
6765 # XK_KP_Multiply * ESC O j
6766 # XK_KP_Add + ESC O k
6767 # XK_KP_Separator , ESC O l
6768 # XK_KP_Subtract - ESC O m
6769 # XK_KP_Decimal . ESC O n
6770 # XK_KP_Divide / ESC O o
6782 # The source-code for rxvt actually defines mappings for F21-F35, using
6783 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
6784 # are rare, so this entry uses the shift- and control-modifiers as in
6785 # xterm+pcfkeys to define keys past F12.
6787 # kIC is normally not used, since rxvt performs a paste for that (shifted
6788 # insert), unless private mode 35 is set.
6790 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
6791 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
6792 rxvt+pcfkeys|rxvt fragment for PC-style fkeys,
6793 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6794 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
6795 kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~,
6796 kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^,
6797 kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^,
6798 kf29=\E[18\^, kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^,
6799 kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^,
6800 kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^, kf40=\E[32\^,
6801 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
6802 khome=\E[7~, kind=\E[a, kri=\E[b, kDC5=\E[3\^, kDC6=\E[3@,
6803 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
6804 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
6805 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
6806 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
6807 use=vt220+vtedit, use=xterm+nopcfkeys,
6809 # rxvt was originally "xvt", first announced in April 1993:
6810 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
6811 #------------------------------------------------------------------------------
6812 # Article: 567 of comp.os.linux.announce
6813 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
6814 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
6815 # From: nation@rocket.sanders.com (Robert Nation)
6816 # Newsgroups: comp.os.linux.announce
6817 # Subject: xvt upload
6818 # Date: 16 Apr 1993 18:13:07 GMT
6819 # Organization: Cornell Theory Center
6821 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
6822 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
6823 # NNTP-Posting-Host: theory.tc.cornell.edu
6824 # Keywords: xvt, xterm, Xwindows
6825 # Originator: mdw@theory.TC.Cornell.EDU
6827 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
6828 # rxvt.README on sunsite.unc.edu.
6830 # Xvt is an xterm replacement which uses a little less memory, and is
6831 # suitable for use on machines with small memories. Tek4010 support
6834 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
6835 # to make it a little more compact, and to add and remove certain features.
6839 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
6840 #------------------------------------------------------------------------------
6842 # Though its change-log does not mention this, John Davis has stated that he
6843 # was the author of the changes to use the bce ("new color model") which was
6844 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
6845 # dates, nor give developer's names. Initial color support was added for rxvt
6846 # "2.0", which was sometime in 1994.
6848 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
6849 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
6851 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
6852 # was from one of my bug-reports -TD
6854 # While the color model both for xterm and rxvt was based on Linux console,
6855 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
6856 # behavior: inserting/deleting characters does not fill the newly empty cell
6857 # with the default background color.
6858 rxvt|rxvt-color|rxvt terminal emulator (X Window System),
6860 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
6861 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
6862 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
6863 use=xterm+256color, use=rxvt,
6864 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
6865 use=xterm+88color, use=rxvt,
6866 rxvt-xpm|rxvt terminal emulator (X Window System with xpm),
6868 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
6869 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6870 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6871 \302x\263y\363z\362{\343|\330}\234~\376,
6873 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
6874 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6875 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6876 \302x\263y\363z\362{\343|\330~\376,
6879 # This variant is supposed to work with rxvt 2.7.7 when compiled with
6880 # NO_BRIGHTCOLOR defined. rxvt needs more work...
6881 rxvt-16color|rxvt with 16 colors like aixterm,
6882 ncv#32, use=ibm+16color, use=rxvt,
6887 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
6888 # makes its function-keys different from other flavors of rxvt -TD
6890 # Testing with tack:
6891 # + made custom description (below) to work, though it sets TERM=xterm.
6893 # Testing with vttest:
6894 # + While "based on" rxvt, some of the basic functionality is broken. The
6895 # window collapses to a single line when running several of the screens
6896 # in vttest, e.g., the tests for cursor movement, screen features,
6897 # double-sized characters.
6898 # + The VT52 test works properly, but this is an exception. Due to the
6899 # other bug(s) most of vttest is untestable.
6900 # + the color test using ECH shows a gap in the bce model, like rxvt.
6902 # Testing with xterm "vttest" scripts:
6903 # + resize.pl does not work because mrxvt does implement CSI 18 t
6904 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
6905 # + none of the "dynamic colors" (OSC colors) scripts work.
6906 mrxvt|multitabbed rxvt,
6907 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
6908 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
6909 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
6910 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
6911 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
6912 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
6915 mrxvt-256color|multitabbed rxvt with 256 colors,
6916 use=xterm+256color, use=mrxvt,
6919 # From: Michael Jennings <mej@valinux.com>
6923 # removed kf0 which conflicts with kf10 -TD
6924 # remove cvvis which conflicts with cnorm -TD
6925 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
6926 # but does otherwise follow the rxvt+pcfkeys model -TD
6927 # remove nonworking flash -TD
6928 # remove km as per tack test -TD
6929 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
6930 bce, bw, eo, mc5i, mir, xenl, xon, XT,
6932 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cub1=^H,
6933 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
6934 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
6935 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, is1=\E[?47l\E>\E[?1l,
6936 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
6937 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kc1=\E[8~,
6938 kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, mc4=\E[4i,
6939 mc5=\E[5i, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmkx=,
6940 rmso=\E[27m, rmul=\E[24m,
6941 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6942 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6944 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6945 %;m%?%p9%t\016%e\017%;,
6946 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, smkx=, smso=\E[7m,
6947 smul=\E[4m, vpa=\E[%i%p1%dd, use=ansi+csr, use=ansi+idl,
6948 use=ansi+local, use=xterm+alt47, use=vt100+enq,
6949 use=rxvt+pcfkeys, use=ecma+color, use=vt100+4bsd,
6952 Eterm-256color|Eterm with xterm 256-colors,
6953 use=xterm+256color, use=Eterm,
6955 Eterm-88color|Eterm with 88 colors,
6956 use=xterm+88color, use=Eterm,
6959 # Based on rxvt 2.4.8, it has a few differences in key bindings
6960 aterm|AfterStep terminal,
6962 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
6966 # This is not based on xterm's source...
6967 # vttest shows several problems with keyboard, cursor-movements.
6968 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6969 xiterm|internationalized terminal emulator for X,
6970 km@, use=klone+color, use=xterm-r6,
6974 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6975 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6976 # chars look like --esr)
6977 hpterm|X-hpterm|HP X11 terminal emulator (old),
6978 am, da, db, mir, xhp, xon,
6979 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6980 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6981 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6982 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6983 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6984 kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
6985 khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, krmir=\ER,
6986 ktbc=\E3, meml=\El, memu=\Em,
6987 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6988 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6989 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6990 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6991 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6993 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6994 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6995 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6996 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6997 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
6998 # HPUX 11 provides a color version.
6999 hpterm-color|HP X11 terminal emulator with color,
7003 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
7004 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
7006 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90081_198611_Facilities_for_Series_200_300_and_500.pdf
7007 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1987/97089-90081_198709_Facilities_for_Series_200_300_and_500_HP-UX_Concepts_and_Tutorials.pdf
7009 # This article does not cover the HP 46020A keyboard that is used by the Model
7010 # 217 and 237 computers. For information on this keyboard read the article,
7011 # "The Series 300 ITE as System Console" found in the manual, HP-UX Concepts
7012 # and Tutorials, Vol. 7.
7015 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90042_198608_HP-UX_Concepts_and_Tutorials.pdf
7017 # HP300_Series_ITE.pdf
7019 # This version, which came from Martin Trusler, was tested with lynx using
7021 hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color (new),
7022 OTbs, am, ccc, da, db, km, mir, xhp,
7023 colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
7025 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
7026 u+v+w+x|y<z>{*|!}\273~\362,
7027 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
7028 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
7029 dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
7030 home=\E&a0y0C, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7032 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
7033 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
7034 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
7035 %t1%e.%p7%d%;z%p1%dI,
7036 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
7037 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV,
7038 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
7039 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
7040 I\E&v1b1c6I\E&v1x1y7I,
7041 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7042 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7043 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7044 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
7045 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
7046 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
7048 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%p5%{8}%*%+%{64}%+%c%?
7049 %p9%t%'\016'%c%e%'\017'%c%;,
7050 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
7051 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
7052 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=hp+pfk-cr,
7055 # This is for the extensible terminal emulator on the X11R6 contrib tape.
7056 # It corresponds to emu's internal emulation:
7058 # emu's default sets TERM to "xterm", but that doesn't work well -TD
7059 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
7060 # fixes: add civis, cnorm, sgr -TD
7061 emu|emu native mode,
7062 am, bce, mir, msgr, xon,
7063 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
7064 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
7065 \224t\225u\226v\227w\230x\231~\244,
7066 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
7067 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
7068 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
7069 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
7070 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
7071 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
7072 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
7073 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
7074 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
7075 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
7076 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
7077 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
7078 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
7079 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
7080 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
7081 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
7083 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
7085 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
7087 # VT220 terminfo entry for the Emu emulation, corresponds to
7089 # with NumLock set (to make the keypad transmit kf0-kf9).
7090 # fixes: add am, xenl, corrected sgr0 -TD
7091 emu-220|Emu-220 (vt200-7bit mode),
7093 cols#80, it#8, lines#24, vt#200,
7094 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
7095 blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r,
7096 cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
7097 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch=\E[%p1%dP,
7098 dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, ed=\E[0J, el=\E[0K,
7099 el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH,
7100 if=/usr/share/tabset/vt300, il=\E[%p1%dL, il1=\E[1L,
7101 ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, kbs=^H,
7102 kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7103 kcuu1=\E[A, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl,
7104 kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR,
7105 kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~,
7106 kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~,
7107 kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt,
7108 kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx,
7109 kf9=\EOy, khlp=\E[28~, rev=\E[0;7m, ri=\EM, rmacs=^O,
7110 rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
7111 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h,
7112 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
7113 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7114 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
7115 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=ansi+csr,
7116 use=ansi+local, use=vt220+vtedit, use=vt220+cvis,
7119 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
7120 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
7121 # indicate that it emulates more than one terminal, but incompletely.
7123 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
7124 # It is based on vt102's entry, with some subtle differences, but also
7126 # supports ANSI colors (except for 'op' string)
7127 # apparently implements alternate screen like xterm
7128 # does not use padding, of course.
7129 mvterm|vv100|SwitchTerm aka mvTERM,
7132 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cub1=^H, cud1=\n,
7133 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P, ed=\E[J,
7134 el=\E[K, ich=\E[%p1%d@, ich1=\E[@, kcub1=\EOD, kcud1=\EOB,
7135 kcuf1=\EOC, kcuu1=\EOA, op=\E[100m, rev=\E[7m, ri=\EM,
7136 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7137 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
7138 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7139 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
7140 %;m%?%p9%t\016%e\017%;,
7141 sgr0=\E[m\017, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7142 use=ansi+csr, use=ansi+idl, use=ansi+local,
7143 use=xterm+alt47, use=vt100+fnkeys, use=vt100+4bsd,
7148 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
7150 # "mterm -type ansi" sets $TERM to "ansi"
7151 mterm-ansi|ANSI emulation,
7154 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7155 bel=^G, cr=\r, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
7156 dim=\E[2m, ech=\E[%p1%dX, home=\E[H, hpa=\E[%i%p1%d`,
7157 ht=^I, ich1=, ind=\E[S, is2=\E)0\017, kbs=^H, nel=\EE, ri=\E[T,
7158 rmacs=^O, rmso=\E[27m, rmul=\E[24m,
7159 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7160 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7161 sgr0=\E[m\017, smacs=^N, vpa=\E[%i%p1%dd, use=ansi+erase,
7162 use=ansi+idc1, use=ansi+idl, use=ansi+local,
7163 use=ansi+sgrbold, use=ecma+index,
7165 # mterm normally sets $TERM to "mterm"
7166 mterm|mouse-sun|Der Mouse term,
7169 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
7170 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
7171 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
7172 rmir=^O, rmso=^T, smir=^Q, smso=^V,
7173 # "mterm -type decansi" sets $TERM to "decansi"
7175 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
7176 decansi|ANSI emulation with DEC compatibility hacks,
7177 am, mir, msgr, xenl,
7178 colors#8, it#8, pairs#64,
7179 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7180 bel=^G, cr=\r, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
7181 dim=\E[2m, ech=\E[%p1%dX, enacs=\E(B\E)0, home=\E[H,
7182 hpa=\E[%i%p1%d`, ht=^I, ich1=, ind=\E[S, is2=\E)0\E[r\017,
7183 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7184 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7185 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7186 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
7187 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
7188 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\EE,
7189 op=\E[0m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>,
7190 rmso=\E[27m, rmul=\E[24m, setab=\E[4%p1%dm,
7192 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7193 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7194 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
7195 vpa=\E[%i%p1%dd, use=ansi+cpr, use=ansi+csr,
7196 use=ansi+erase, use=ansi+idc1, use=ansi+idl,
7197 use=ansi+local, use=ansi+sgrbold, use=vt220+vtedit,
7198 use=ecma+index, use=vt220+cvis,
7201 # http://vwm.sourceforge.net/
7203 # VWM 2.0.2 (2009-05-01)
7204 # vwmterm is a terminal emulator written for the VWM console window manager.
7205 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
7206 vwmterm|VWM terminal,
7207 am, bce, ccc, mir, msgr, npc, xenl, xon,
7209 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7210 bel=^G, bold=\E[1m, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
7211 cvvis=\E[?25h, dim=\E[2m, home=\E[H, il1=\E[L, ind=\n,
7212 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7213 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7214 kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7215 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7216 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rmacs=\E[10m,
7217 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
7219 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7220 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
7221 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
7222 smul=\E[4m, use=ansi+erase, use=ansi+local, use=ansi+sgr,
7223 use=vt220+cvis, use=xterm+alt1049,
7227 # MGR is a Bell Labs window system lighter-weight than X.
7228 # These entries describe MGR's xterm-equivalent.
7229 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
7232 mgr|Bellcore MGR (non X) window system terminal emulation,
7234 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
7235 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
7236 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
7237 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
7238 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
7239 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
7240 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7241 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
7242 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
7244 mgr-sun|Mgr window with Sun keyboard,
7245 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
7246 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
7247 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
7248 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
7249 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
7250 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
7251 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
7252 mgr-linux|Mgr window with Linux keyboard,
7253 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
7254 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
7255 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7256 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7257 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
7262 st|stterm|aka simpleterm,
7267 # there is some problem turning off line-drawing
7268 # shift+control function-keys do nothing; shift+control cursor keys work
7269 # the padding tests make the terminal non-functional.
7272 # SL/SR/REP do not work
7273 # ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
7275 # This entry discards the ccc/initc capabilities from st-0.7 because they
7276 # belong in st-256color.
7277 st-0.8|simpleterm 0.8,
7278 kcbt@, kent@, oc=\E]104\007, Ms=\E]52;%p1%s;%p2%s\007,
7279 kDN3=\E[1;3B, kDN5=\E[1;5B, kLFT3=\E[1;3D, kLFT5=\E[1;5D,
7280 kNXT3=\E[6;3~, kNXT5=\E[6;5~, kPRV3=\E[5;3~,
7281 kPRV5=\E[5;5~, kRIT3=\E[1;3C, kRIT5=\E[1;5C,
7282 kUP3=\E[1;3A, kUP5=\E[1;5A, use=ecma+strikeout,
7286 # dim is intermittent, sometimes works, sometimes does not
7287 # italics may show up with yellow color
7288 # has control cursor-keys, alt cursor-keys, still no combinations
7289 # has control pageup/down
7290 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
7291 # Se and Ss are implemented in the source-code, but the terminfo
7292 # provided with the source is incorrect, since Se/Ss are mis-coded
7293 # as booleans rather than strings.
7294 st-0.7|simpleterm 0.7,
7295 kcbt@, kent@, Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B,
7296 kDN5=\E[1;5B, kLFT3=\E[1;3D, kLFT5=\E[1;5D,
7297 kNXT3=\E[6;3~, kNXT5=\E[6;5~, kPRV3=\E[5;3~,
7298 kPRV5=\E[5;5~, kRIT3=\E[1;3C, kRIT5=\E[1;5C,
7299 kUP3=\E[1;3A, kUP5=\E[1;5A, use=ecma+strikeout,
7300 use=st-0.6, use=xterm+256color,
7304 # This version uses a table which supports a single modifier (a subset of
7305 # xterm's keys, using the same scheme). Because it supports only a single
7306 # modifier in this table, function keys f36-f48 are normally unavailable
7307 # because they are assigned to modifier-4.
7309 # The program assigns TERM to match the program name (the upstream source says
7310 # "st", but Debian renames it to "stterm").
7312 # The source includes two entries which are not useful here:
7313 # st-meta| simpleterm with meta key,
7314 # st-meta-256color| simpleterm with meta key and 256 colors,
7315 # because st's notion of "meta" does not correspond to the terminfo definition.
7316 # Rather, it acts like xterm - when the meta feature is disabled.
7319 # Added eo, removed ul -TD
7322 # implements control-modifier, but not control-shift for special keys
7323 # implements alt-modifier, but not alt-shift for special keys
7326 # http://git.suckless.org/st/log/st.info
7327 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
7328 # still has no function keys past kf36 (no combinations of modifiers)
7329 # no application keypad mode, e.g, kent.
7330 st-0.6|simpleterm 0.6,
7331 bce, mir, npc, xenl, XT,
7333 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
7335 clear=\E[H\E[2J, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
7336 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7337 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
7338 flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG,
7339 ich=\E[%p1%d@, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
7340 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
7341 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
7342 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
7343 kclr=\E[3;5~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
7344 khome=\E[1~, kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M,
7345 kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
7346 op=\E[39;49m, ri=\EM, rmacs=\E(B, rmir=\E[4l,
7347 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
7348 rs2=\E[4l\E>\E[?1034l, setab=\E[4%p1%dm,
7350 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7352 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7354 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7355 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7356 smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=, u8=\E[?1;2c,
7357 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q,
7358 use=ansi+apparrows, use=ansi+csr, use=ansi+enq,
7359 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
7360 use=ansi+sgrbold, use=vt100+4bsd, use=vt100+pfkeys,
7361 use=vt220+pcedit, use=ecma+index, use=xterm+alt1049,
7362 use=vt220+cvis, use=xterm+sl, use=ecma+italics,
7363 use=ecma+strikeout, use=bracketed+paste,
7368 # Note: the original terminfo description uses leading blank to persuade
7369 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
7372 # Reading the code shows it should work for aixterm 16-colors
7373 # - added st-16color
7376 # - set eo (erase-overstrike)
7378 # - tbc doesn't work
7380 # - cbt doesn't work
7381 # - shifted cursor-keys send sequences like rxvt
7382 # - sgr referred to unimplemented "invis" mode.
7383 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
7384 simpleterm|old-st|simpleterm 0.1.1,
7385 am, eo, mir, msgr, ul, xenl,
7386 cols#80, it#8, lines#24,
7387 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H,
7388 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7389 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7390 dch1=\E[P, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG,
7391 ht=^I, ich=\E[%p1%d@, ind=\n, kbs=^?, kdch1=\E[3~,
7392 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
7393 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
7394 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7395 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmso=\E[m,
7397 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7399 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
7400 use=ansi+csr, use=ansi+idl, use=vt220+cvis,
7401 use=ecma+index, use=klone+color, use=xterm+acs,
7403 st-16color|stterm-16color|simpleterm with 16-colors,
7404 use=ibm+16color, use=st,
7405 # Tested with st 0.8.2
7406 # The issue with the titlebar is fixed, though st is very slow.
7407 # In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
7408 # garbage is shown in the titlebar.
7410 # terminal wants to use TERM=stterm-256color, but that is longer than 14
7411 # characters, making the choice nonportable.
7412 st-256color|stterm-256color|simpleterm with 256 colors,
7413 use=xterm+256color, use=st,
7416 # https://github.com/software-jessies-org/jessies/wiki/Terminator
7418 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
7419 # Debian/current -TD (2011/8/20)
7421 # There were some packaging problems:
7422 # a) using Java, the program starts off using 50Mb, and climbs from there,
7423 # up to 114Mb after testing (no scrollback).
7424 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
7425 # (two copies, just in case the host happens to be Mac OS X).
7426 # I deleted this after testing with tack.
7428 # Issues/features found with tack:
7429 # a) tbc does not work (implying that hts also is broken).
7430 # Comparing with the tabs utility shows a problem with the last tabstop on
7432 # b) has xterm-style shifted function-key strings
7433 # meta also is used, but control is ignored.
7434 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
7436 # d) some combinations of shift/control send xterm-style sequences for
7437 # insert/delete/home/end.
7438 # e) numeric keypad sends only numbers (compare with vttest).
7439 # f) meta mode (km) is not implemented.
7441 # Issues found with ncurses test-program:
7442 # a) bce is inconsistently implemented
7443 # b) widths of Unicode values above 256 do not always agree with wcwidth.
7445 # Checked with vttest, found low degree of compatibility there.
7447 # Checked with xterm's scripts, found that the 256-color palette is fixed.
7451 # b) corrected sgr0 to reset alternate character set
7452 # c) modified smacs/rmacs to use SCS rather than SI/SO
7456 # Revisiting in May 2019, the Debian package was no longer available, and a
7457 # developer-provided ".deb" does not work. However, a usable Windows ".msi"
7458 # (which relies upon Cygwin) can be tested. The developers provide a terminfo,
7459 # but some of the features it lists do not work reliably (bce, italics, invis).
7463 # invis attribute fails
7464 # key-definitions could be expanded, with some work:
7465 # + supports xterm-style cursor key-modifiers for shift
7466 # + supports xterm-style function key-modifiers for shift,control,alt
7467 # + supports xterm-style editing key-modifiers for shift,control,alt
7469 # ncurses test-program:
7470 # "C" menu shows that bce implementation is incomplete
7471 # italics did not work
7472 # dim worked once in tack, but not in ncurses test-program
7473 # "F" thick-line characters do not display
7475 # terminal does not respond to 80/132-column switching
7476 # wrapping at the right margin is erratic
7477 # there are several problems in the cursor-movements and screen-features
7478 # no VT52, no double-sized characters
7479 # Device attributes response says it is a vanilla VT100
7480 # does not respond to xterm mouse controls
7481 # alternate screen tests do not fill the screen, return wrong position
7482 # window modify/report operations do not work
7483 # miscellaneous ISO-6429 tests, e.g., REP, do not work
7484 # CBT, CHT, HPR, CNL,CPL, VPR do not work
7486 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
7487 # use xterm+256setaf, etc -TD
7488 terminator|Terminator no line wrap,
7489 bce, eo, mir, msgr, xenl, xon,
7490 cols#80, it#8, lines#24, lm#0,
7491 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7492 bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
7493 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
7494 dim=\E[2m, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7495 flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ind=\n,
7496 is1=\E[?47l\E=\E[?1l,
7497 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
7498 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7499 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7500 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
7501 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, rev=\E[7m,
7502 ri=\EM, rmacs=\E(B, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
7503 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, s0ds=\E(B, s1ds=\E(0,
7504 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
7505 %;m%?%p9%t\E(0%e\E(B%;,
7506 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
7507 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+arrows,
7508 use=ansi+csr, use=ansi+enq, use=ansi+idl, use=ansi+local,
7509 use=vt220+pcedit, use=ecma+italics, use=ecma+index,
7510 use=xterm+256setaf, use=xterm+sl-twm,
7511 use=xterm+alt1049, use=vt220+cvis, use=bracketed+paste,
7514 # https://www.enlightenment.org/about-terminology
7515 # https://github.com/borisfaure/terminology
7518 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a VT100
7519 # emulator, nor is it compatible with xterm, but it uses a few features from
7523 # cursor does not fill on focus
7524 # there are pervasive problems with clearing/erasing parts of the screen
7525 # resizing the window causes it to stop listening to the keyboard
7527 # doesn't understand VT100 CPR needed for resize
7532 # uses bce model for colors, but (see below) fails the vttest screens
7533 # has partial support for 256color feature.
7534 # tack function-keys (a subset of xterm+pcf0), and
7535 # tack cursor-keys (a subset of xterm+pce2):
7536 # ctrl+shift (ignored)
7538 # shift-alt modifier -> shift (2)
7542 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
7543 # ctrl + khome/kend works - none of the other modifiers do
7545 # spits lots of messages from termptyesc.c especially in vttest.
7546 # no 132-column mode
7547 # fails menu 1, 2 (definitely not VT100-compatible)
7548 # primary (claims VT420 with several options, apparently none work) and
7549 # secondary report says (perhaps... VT420): \E[>41;285;0c
7550 # CHA, HPR, VPA, CNL, CPL work
7551 # BCE with ED/EL - fail
7552 # BCE with ECH/indexing - fail
7554 # unlike teken, background light/dark works
7556 # X10 and Normal mouse work
7557 # Any-event mouse works
7558 # Mouse button-event works
7560 # This description uses xterm+pcf0, which is misleading because the program
7561 # does not handle combinations of modifiers - but listing them all would
7562 # involve more effort than its developers spent -TD
7563 terminology-0.6.1|EFL-based terminal emulator (0.6.1),
7565 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
7566 kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
7567 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
7568 %;m%?%p9%t\016%e\017%;$<2>,
7569 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
7570 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
7571 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
7572 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
7573 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
7574 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
7575 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
7576 kRIT7=\E[1;7C, kUP=\E[1;2A, use=ansi+enq, use=xterm+pcf0,
7577 use=vt100, use=xterm+256setaf,
7580 # Tested terminology 1.0.0
7583 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
7584 # and control+alt were added like xterm+pcc2
7585 # Editing keys have some features from xterm+pce2
7586 # Changed from xterm+pcf0 to xterm+pcf2
7591 # Aside from the partial fixes for function/cursor/editing keys, no improvement
7592 # in other tests versus 0.6.1
7593 terminology-1.0.0|EFL-based terminal emulator (1.0.0),
7594 dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
7595 khome=\E[OH, rmacs=\E(B,
7596 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7597 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
7598 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
7599 use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2,
7600 use=xterm+pcf2, use=xterm+pcc2, use=bracketed+paste,
7601 use=terminology-0.6.1,
7604 # Tested terminology 1.8.1 using tack and vttest.
7606 # flash does not work
7607 # italics and crossed-out text work
7610 # DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling
7611 # DA2 says this is a VT510, version 33.7
7612 # NRCS does not work, program hangs in the locking shift test.
7613 # some of the VT420 rectangle operations work
7614 # left/right margins do not work
7615 # most of DECSCUSR works
7616 # most problems with bce are fixed.
7617 terminology-1.8.1|EFL-based terminal emulator (1.8.1),
7619 cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
7620 use=linux+kbs, use=ecma+index, use=xterm+256setaf,
7621 use=ansi+rep, use=ecma+strikeout, use=xterm+focus,
7622 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
7623 use=vt220+cvis, use=ecma+italics, use=xterm-basic,
7626 terminology|EFL-based terminal emulator,
7627 use=terminology-1.8.1,
7629 ######## OPENGL CLIENTS
7632 # https://github.com/jwilm/alacritty
7633 # Version 0.6.0 (2020/11/25)
7634 # Version 0.4.0 (2019/11/25)
7635 # Version 0.3.3 (2019/08/03)
7636 # Version 0.2.1 (2018/10/03)
7637 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
7638 # terminal programs) is not designed to run with a remote server.
7640 # Packaged in Arch Linux -
7642 # initial screensize 24x80
7643 # no DECCOLM (does not switch between 80/132 columns)
7644 # otherwise, passes wrapping test
7646 # identifies as a VT102
7647 # numeric keypad does not send expected codes (seen in 0.4.0)
7650 # ECH works in 0.3.3 (0.2.1 left text on right margin)
7654 # does not implement any of the DECRQM/DECRPM controls
7655 # does not implement any of the DECRQSS controls
7660 # fails CHT, otherwise ECMA-48 cursor movement ok
7661 # fails ERM/SPA, SL, SR, passes REP, SD, SU
7664 # has normal and highlight mouse
7665 # has any-event and button-event mouse
7666 # + does support SGR-mouse
7667 # + does not correctly support focus in/out events (seen in 0.4.0)
7668 # cursor-position wrong after alternate-screen (fixed in 0.4.0)
7669 # none of the dtterm controls work
7671 # bell and flash do not work
7672 # blink does not work
7673 # italics and crossed-out work (latter did not work in 0.2.1)
7674 # function-keys work up (tested combinations which window manager allows)
7675 # treats meta as escape-prefix
7677 # The program sources include "alacritty" and "alacritty-direct", which are
7678 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
7679 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
7680 alacritty|alacritty terminal emulator,
7681 rs1=\Ec\E]104\007, use=xterm+256color,
7682 use=alacritty+common,
7684 alacritty-direct|alacritty with direct color indexing,
7685 use=xterm+indirect, use=alacritty+common,
7687 # cancel km, since it is not actually meta mode -TD
7688 # added ecma+strikeout in 0.3.3 -TD
7689 # added xterm+sl-twm in 0.3.3 -TD
7690 alacritty+common|base fragment for alacritty,
7692 kb2=\EOE, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
7693 Smulx=\E[4:%p1%dm, use=ecma+index, use=xterm+focus,
7694 use=xterm+sm+1006, use=xterm-basic, use=xterm+app,
7695 use=ansi+rep, use=xterm+tmux, use=ecma+strikeout,
7696 use=xterm+sl-twm, use=ecma+italics, use=xterm+pce2,
7697 use=xterm+pcc2, use=xterm+pcf2, use=bracketed+paste,
7699 # https://github.com/raphamorim/rio
7700 # derived from alacritty
7701 rio|fork of alacritty,
7703 rio-direct|fork of alacritty,
7704 use=alacritty-direct,
7707 # https://github.com/kovidgoyal/kitty
7708 # Project started in 2016/10 (see alacritty), but is a Python script rather
7709 # than Rust, using OpenGL. The same caveats regarding remote connections
7710 # apply. This is not an X terminal, though (like alacritty), it copies
7711 # features from xterm.
7713 # Regarding the name "kitty", that is a pun, reflected in the description.
7715 # http://www.9bis.net/kitty/
7716 # https://github.com/kovidgoyal/kitty/issues/9
7717 # https://github.com/kovidgoyal/kitty/issues/1025
7719 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
7720 # https://github.com/kovidgoyal/kitty/issues/879
7722 # Version 0.21.2 (June 28, 2021)
7723 # changes since 0.19.1
7725 # Repeatable tests with tack and vttest assume a standard screensize --
7726 # measured in characters. However, kitty uses pixel-measurements and
7727 # does not readily use characters.
7728 # Resizing with twm shows only pixel-based hint rather than characters
7729 # manual page states that it is possible to override initial window size,
7730 # but configuration file has no effect on initial window size.
7731 # The same problem with XFCE4, but editing the cached json file works
7732 # for setting the window size (the "c" suffix for cells does not):
7733 # {"window-size": [720, 440]}
7734 # though the values depend upon the font in use.
7738 # invisible text still does not work
7739 # function/special key modifiers finally work
7741 # Version 0.19.1 (October 6, 2020)
7742 # changes since 0.13.3:
7745 # REP works, though using unspecified behavior
7747 # xterm's SGR-mouse mode is recognized.
7748 # does recognize original alternate-screen
7749 # bug: mouse focus in/out does not work.
7750 # bug: X10 mouse mode responds like any-event
7751 # bug: highlight-tracking does not work; terminal hangs.
7754 # rs1 adds an empty string for resetting title- and other OSC-strings.
7757 # Version 0.13.3 (January 19, 2019)
7759 # initial screensize 71x22
7760 # does not respond to "resize -s"
7761 # resizing with window manager gives no clues
7763 # does not switch between 80/132 columns
7764 # fails wrapping test, copying vte/rxvt
7765 # no reverse-background, no blink
7766 # claims to be VT200:
7768 # secondary \E[>1;4000;12c
7770 # no GR in the locking-shifts screen
7771 # no NRCS or ISO-2022, anyway
7774 # has DECTCEM, ECH, but no SRM and DECSCA
7775 # has operating condition report, none of the others
7778 # DECRQSS ok for DECSTBM, SGR, none of the others
7781 # DECXCPR device status works, none of the others
7782 # no left/right margins
7783 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
7784 # inside of DECCARA is uncolored
7785 # line-drawing with DECCARA does not work
7786 # aside from left/right margins, editing sequences look ok
7789 # fails ECH test for bce
7791 # fails REP, SL, SL, but other cursor-movement ok
7793 # does not recognize original alternate-screen
7794 # cursor-position wrong after alternate-screen
7795 # has normal mouse, any-event, any-button, but
7797 # no mouse-highlight tracking
7799 # dtterm - only supports report-size chars/pixels
7800 # recognizes tcap-query
7802 # flash doesn't work
7803 # italics do not work
7804 # bce should be set (but see vttest)
7805 #* developer's terminfo stopped at kf25, but the program continues,
7806 # copying xterm for the rest of the control+fkey sequence
7807 # (but only one modifier is supported, like iTerm2).
7808 #* it omitted shifted pageup/down
7809 #* control+editing keys work
7810 # In contrast to function-keys, some additional modifier combinations
7811 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
7812 # the implementation is incomplete, the building-blocks are consistent
7813 # with what has been implemented -TD
7814 # DECKPAM does not work -TD
7815 #* ka1, ka3, kc1, kc3 were bogus (removed)
7816 #* meta sends escape (removed kmm) -TD
7817 #* cvvis does not make cursor "more visible" -TD
7819 use=xterm+256color, use=kitty+common,
7820 kitty-direct|KovId's TTY using direct colors,
7821 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
7822 kitty+common|KovId's TTY common properties,
7823 am, mc5i, mir, msgr, npc, xenl,
7825 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7827 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
7828 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
7829 dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7830 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7831 ich=\E[%p1%d@, ind=\n, kBEG=\E[1;2E, kbeg=\EOE, kbs=^?,
7832 kcbt=\E[Z, op=\E[39;49m, rev=\E[7m, ri=\EM, rmacs=\E(B,
7833 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l, rmso=\E[27m,
7834 rmul=\E[24m, rs1=\E]\E\\\Ec,
7835 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7837 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7838 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7839 Smulx=\E[4:%p1%dm, use=ansi+csr, use=ansi+enq,
7840 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
7841 use=ansi+rep, use=xterm+focus, use=xterm+sm+1006,
7842 use=ecma+index, use=xterm+pcfkeys, use=xterm+sl-twm,
7843 use=ecma+strikeout, use=ecma+italics,
7844 use=xterm+alt1049, use=att610+cvis, use=xterm+tmux,
7845 use=bracketed+paste, use=report+version,
7847 kitty+setal|set underline colors (nonstandard),
7848 setal=\E[58:2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1
7851 ######## WAYLAND CLIENTS
7854 # https://codeberg.org/dnkl/foot/
7857 # This identifies as a VT220 with 4=sixel and 22=color, however:
7859 # bell does not work
7860 # status-line does not work because foot does not set the window title
7861 # sends escape when meta key is used, whether or not smm/rmm enabled
7864 # no application-mode for numeric keypad (unless private mode 1035 is set)
7868 # protected areas do not work
7869 # SU/SD work, SL/SR do not
7870 # DECRPM responds, but not the corresponding ANSI reports.
7871 # otherwise few reports, except cursor-position and mouse and some dtterm
7872 # VT520 cursor-movement works, except for left/right margins
7873 # supports xterm/DECSCUSR, though default case in vttest does not blink
7874 # Send: <27> [ 0 <32> q
7875 # Text: The cursor should be a blinking rectangle
7876 # partial support for xterm mouse any-event mode and button-event mode:
7877 # + does not report focus-in/focus-out
7878 # + does not report buttons 6/7
7879 # alternate-screen works
7880 foot|foot terminal emulator,
7881 oc=\E]104\E\\, use=xterm+256color2, use=foot+base,
7883 foot-direct|foot with direct color indexing,
7884 use=xterm+direct, use=foot+base,
7886 foot+base|foot base fragment,
7887 am, bce, bw, mir, msgr, npc, xenl, AX, XT,
7888 cols#80, it#8, lines#24,
7889 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, dim=\E[2m,
7890 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7891 flash=\E]555\E\\, ind=\n, is2=\E[!p\E[4l\E>, kbs=^?,
7892 kcbt=\E[Z, oc=\E]104\E\\, op=\E[39;49m, ri=\EM,
7893 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
7894 rs1=\Ec, rs2=\E[!p\E[4l\E>,
7895 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7896 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
7897 sgr0=\E(B\E[m, smam=\E[?7h, smkx=\E[?1h\E=, E3=\E[3J,
7898 use=att610+cvis, use=ansi+csr, use=ansi+cup,
7899 use=ansi+enq, use=ansi+local, use=ansi+idc, use=ansi+idl,
7900 use=ansi+rca2, use=ansi+rep, use=ansi+tabs,
7901 use=ansi+sgrbold, use=ecma+index, use=ecma+italics,
7902 use=ecma+strikeout, use=xterm+acs, use=xterm+alt+title,
7903 use=xterm+pcfkeys, use=xterm+sm+1006, use=xterm+tmux2,
7904 use=xterm+sl-alt, use=bracketed+paste,
7905 use=report+version, use=xterm+focus,
7907 ######## WEB CLIENTS
7910 # https://domterm.org
7912 # Quoting its webpage:
7913 # The domterm command runs a server that manages sessions (usually shell
7914 # processes). The user interface and terminal emulation is handled by a
7915 # JavaScript library that can run in a regular web browser or an embedded
7916 # browser such as Electron, using Web Sockets to talk to the server.
7918 # it can connect to, and display in, a web browser, or as a standalone Qt
7919 # application. Either way, it displays in the current desktop session.
7921 # Testing current code (2019/07/06) with Fedora 30:
7930 # bce screen shows diagonal lines...
7932 # kf11 toggles maximize
7933 # cursor-key application mode works
7934 # numeric keypad application does not work; keys always send face-codes
7935 # sends utf-8 for meta, like xterm
7937 # has problems with menu #1 (wrapping)
7938 # DA = VT200 with 132 columns, color
7939 # DA2 = 990, 100300 ("\E[>990;100300;0c")
7940 # no VT52, no double-size characters
7941 # vt220 ECH test works, SRM, DECSCA do not
7942 # S7C1T/S8C1t does not work
7943 # DECUDK does not work
7944 # CNL does not work; the other ECMA-48 cursor-movement tests work
7945 # REP sort-of works (does not match xterm)
7946 # SD/SU work, but not SL/SR
7947 # window reporting: works for size in chars/pixels, but not other tests
7948 # X10 mouse clicks work -- but return 4 rather than 1 for codes
7949 # any-event mouse mode acts like any-button mode
7950 # implements SGR mouse-mode
7952 # does not implement initc
7953 # does accept either colons or semicolon in 38/48 SGR.
7954 domterm|DomTerm web client,
7956 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
7957 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7959 sitm@, smkx=\E[?1h, use=linux+kbs, use=xterm+256setaf,
7960 use=ecma+index, use=xterm+focus, use=xterm+sm+1006,
7961 use=xterm+pcfkeys, use=xterm-basic,
7962 use=bracketed+paste,
7964 ######## Miscellaneous
7967 # https://wezfurlong.org/wezterm/
7968 # https://github.com/wez/wezterm
7971 # "wezterm is a terminal emulator with support for modern features
7972 # such as fonts with ligatures, hyperlinks, tabs and multiple windows."
7974 # wezterm-20230712_072601_f4abf8fd-1.fedora38.x86_64
7975 # tested with MacOS and Fedora 38/39.
7978 # + written in Rust.
7979 # + initial screensize is odd, i.e., 81x24
7980 # provides no visual feedback on resize
7981 # ignores "resize -s"
7982 # manual resize and then running resize got off-by-one adjustment
7983 # + leaves debris (unerased cells) when switching between normal/alternate
7985 # + sets TERM=xterm-256color
7987 # + misplaced message in "am" screen
7988 # + fails xenl (should be false)
7989 # + cvvis is same as cnorm, block
7990 # + has blink and dim
7991 # + in bce test, blue isn't really blue but some pale purple
7992 # + modified keys mostly work, but its tab control interferes with some
7993 # + rmm/smm don't work (always uses escape-prefix)
7995 # + poor (doesn't copy anyone, most of the results are wrong)
7997 # + DA is VT5xx with sixel, selective erase, user windows, color
7998 # + DA2 is VT220 version 277
7999 # + only the VT100 character set works, contrary to DA/DA2.
8001 # + double-sized character work, with some debris
8002 # + doesn't switch between 80/132 columns.
8003 # + numeric keypad ANSI application mode escapes don't work.
8004 # + numeric keypad ANSI mode misses "0", ".", ","
8005 # + uses PC-style editing keypad \E[H and \E[F for Find and Select
8007 # + DECSED selective erase doesn't work
8008 # + SRM doesn't work
8009 # + 8-bit controls don't work
8010 # + DECNCSM doesn't work
8011 # + most DECRQSS do not work (DECSCL, DECSTBM, DECSLRM respond)
8012 # + DECRQM/DECRPM don't work (most reply permanently reset)
8013 # + DECLRMM responds to DECRPM, but VT420 rectangle tests do not work.
8014 # Some of the left/right margin tests work with the cursor-movement screen,
8015 # but DECFI/DECBI do not work. The other cursor-movement tests are buggy.
8016 # + implements ECMA-48 cursor movement, but not SL/SR or protected area
8017 # + implements xterm normal, any-event and button-event mouse, none of the rest
8018 # + reports window size, none of the other window reports
8019 wezterm|Wez's Terminal Emulator,
8021 cvvis@, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@,
8025 # https://github.com/contour-terminal/contour
8027 # "Modern C++ Terminal Emulator"
8028 # Contour is a modern and actually fast, modal, virtual terminal emulator,
8029 # for everyday use. It is aiming for power users with a modern feature mindset.
8031 # That is three occurrences of "modern" too many -TD
8034 # - cannot run, because the package is not signed.
8037 # contour-terminal-0.3.12.262-6.fc39.x86_64
8038 # - dumps core, cannot test
8041 # contour-terminal-0.4.0.6245-1.fc38.x86_64
8042 # - starts but doesn't display
8045 # contour-terminal-0.4.0.6245-1.fc38.x86_64
8046 # - starts but doesn't display
8047 # contour-terminal-0.3.12.262-1.fc38.x86_64
8048 # + testable (see below)
8049 # + initial screensize 62x23, no visual feedback on resize, no "resize -s"
8051 # Sets TERM=contour (which is preferable to xterm).
8054 # + cvvis is same as cnorm, "|"
8055 # + sitm/ritm don't work
8056 # + rmm/smm don't work (always uses escape, but terminfo defines km)
8057 # + initp interchanges red/blue (bug in tack?)
8058 # + modified F1-F4 are wrong, sending SS3 with modifier numbers
8059 # + shifted editing-keypad doesn't send anything
8060 # + meta key doesn't work
8061 # + status-line works (based on xterm, including window-resizing)
8062 # + dots don't line up for home test
8065 # + poor 7/25 differences from xterm (perhaps copying iTerm2)
8068 # + hangs in menu 1, etc., when it tries to resize
8070 # infocmp vs xterm-256color
8072 # + rmcup/smcup doesn't use title-stack (but is implemented)
8073 # + doesn't use SGR mouse (but is implemented)
8074 # + sgr doesn't define dim, but dim capability is in terminfo (implemented)
8076 # Developer's terminfo (compiled-in) uses some extensions.
8077 contour|contour-latest|Contour Terminal Emulator,
8078 am, bce, eslok, hs, km, mc5i, mir, msgr, npc, xenl, xvpa,
8079 cols#80, lines#24, pairs#0x7fff,
8080 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
8081 dim=\E[2m, dsl=\E[$~, ech=\E[%p1%dX, el1=\E[1K,
8082 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, hpa=\E[%i%p1%dG,
8083 ind=\n, indn=\E[%p1%dS, invis=\E[8m, ka1=, ka3=, kbs=^?, kc1=,
8084 kc3=, kcbt=\E[Z, kend=\EOF, khlp=, kmous=\E[M, kund=,
8085 oc=\E]104\E\\, op=\E[39;49m, rev=\E[7m, ri=\EM,
8086 rin=\E[%p1%dT, rmam=\E[?7l, rmkx=\E[?1l, rmso=\E[27m,
8087 rmul=\E[24m, rs1=\E]\E\\\Ec,
8088 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8089 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
8090 sgr0=\E(B\E[m, smam=\E[?7h, smkx=\E[?1h, smso=\E[7m,
8091 smul=\E[4m, tsl=\E[2$~\E[1$}\E[H\E[2J, vpa=\E[%i%p1%dd,
8092 Cs=\E]12;%p1%s\E\\, E3=\E[3J, Rmol=\E[55m, Se=\E[ q,
8093 Smol=\E[53m, Smulx=\E[4:%p1%dm, Ss=\E[%p1%d q,
8094 use=ansi+apparrows, use=ansi+cup, use=ansi+csr,
8095 use=ansi+erase, use=ansi+idc, use=ansi+idl,
8096 use=ansi+inittabs, use=ansi+local, use=ansi+rep,
8097 use=att610+cvis, use=ecma+italics, use=ecma+strikeout,
8098 use=xterm+256color, use=xterm+acs, use=xterm+alt1049,
8099 use=xterm+pcc2, use=xterm+pce2, use=xterm+pcf2,
8101 contour-direct|Contour terminal with direct colors,
8102 use=xterm+direct, use=contour,
8104 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
8107 # Columbus UNIX virtual terminal. This terminal also appears in
8108 # UNIX 4.0 and successors as line discipline 1 (?), but is
8109 # undocumented and does not really work quite right.
8110 cbunix|cb unix virtual terminal,
8112 cols#80, lines#24, lm#0,
8113 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8114 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
8115 el=\EK, ich1=\EO, il1=\EP, ind=\n, khome=\EE, rmso=\Eb^D,
8116 rmul=\Eb^A, smso=\Ea^D, smul=\Ea^A, use=vt52+arrows,
8117 # (vremote: removed obsolete ":nl@:" -- esr)
8118 vremote|virtual remote terminal,
8120 cols#79, use=cbunix,
8122 pty|4bsd pseudo teletype,
8123 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
8124 smso=\Ea$, smul=\Ea!, use=cbunix,
8128 # https://www.emacswiki.org/emacs/AnsiTerm
8129 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
8131 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
8132 eterm|GNU Emacs term.el terminal emulation,
8135 bel=^G, bold=\E[1m, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
8136 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
8137 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ind=\n,
8138 rev=\E[7m, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
8139 smir=\E[4h, smso=\E[7m, smul=\E[4m, use=ansi+cpr,
8140 use=ansi+erase, use=ansi+idl, use=ansi+local,
8143 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
8144 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
8147 kbs=^?, khome=\E[1~, op=\E[39;49m, ri=\EM, rmso=\E[27m,
8148 rmul=\E[24m, rs1=\Ec, setab=\E[%p1%'('%+%dm,
8149 setaf=\E[%p1%{30}%+%dm,
8150 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
8152 sgr0=\E[m, use=ansi+apparrows, use=ansi+csr,
8153 use=ansi+sgr, use=vt220+pcedit, use=eterm,
8155 # shell.el can "do" color, though not nearly as well.
8158 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
8161 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
8162 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
8163 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
8165 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
8166 # frequently. The contemporaneous term.el aka ansi-term does not "support"
8167 # italics but does not lose the color information -TD 2017/01/28.
8168 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
8171 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
8172 rmul=\E[24m, sgr0=\E[m, smul=\E[4m, use=ecma+italics,
8177 # Entries for use by the `screen' program by Juergen Weigert,
8178 # Michael Schroeder, Oliver Laumann. The screen and
8179 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
8180 # come from University of Wisconsin and may be older.
8181 # (screen: added <cnorm> on ANSI model -- esr)
8183 # 'screen' defines extensions to termcap. Some are used in its terminal
8185 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
8186 # AX (bool) Does understand ANSI set default fg/bg color
8187 # (\E[39m / \E[49m).
8188 # S0 (str) Switch charset 'G0' to the specified charset.
8189 # E0 (str) Switch charset 'G0' back to standard charset.
8191 # Initially tested with screen 3.09.08
8193 # According to its manual page
8195 # Screen is a full-screen window manager that multiplexes a physical
8196 # terminal between several processes (typically interactive shells). Each
8197 # virtual terminal provides the functions of a DEC VT100 terminal and, in
8198 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
8199 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
8200 # multiple character sets).
8202 # However, there is a design error in its support for video highlights. The
8203 # program uses a table (rendlist) which equates the SGR codes to terminal
8204 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
8205 # is modified only by the presence or absence of the corresponding capabilities.
8206 # Not by their values.
8208 # If screen sets the TERMCAP variable, it uses hardcoded strings which
8209 # correspond to the rendlist table.
8211 # The table gives this information:
8223 # 22 reset bold, standout and dim
8225 # 24 reset underline
8230 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
8231 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
8232 # Without some redesign of screen, it is not possible to extend the set of
8233 # capabilities. Substitution would be possible, e.g., sending italics in
8234 # place of underline.
8236 # Because screen uses hard-coded parsing, it does not check if two capabilities
8237 # use the same value. For example, changing standout to be the same as any of
8238 # the other capabilities will confuse screen. Curses applications which use
8239 # sgr are not impacted (because that usually resets all capabilities before
8240 # setting any), but termcap applications do not use sgr -TD
8242 # The "screen" entry should use ecma+index rather than just indn, but tmux
8243 # defaults to using "screen". For background, screen supported ecma+index
8244 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
8245 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
8246 # terminfo entries (which list about 60% of the control sequences).
8247 screen-base|VT 100/ANSI X3.64 virtual terminal (base),
8248 OTbs, OTpt, km, mir, xenl, G0,
8250 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
8252 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
8253 cnorm=\E[34h\E[?25h, cub1=^H, cud1=\n,
8254 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, cvvis=\E[34l,
8255 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, el1=\E[1K, flash=\Eg,
8256 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, indn=\E[%p1%dS, is2=\E)0,
8257 kbs=^?, kcbt=\E[Z, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8258 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
8259 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8260 khome=\E[1~, kmous=\E[M, nel=\EE, rev=\E[7m, ri=\EM,
8261 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
8262 rs2=\Ec\E[?1000l\E[?25h,
8263 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
8264 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
8265 sgr0=\E[m\017, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[3m,
8266 smul=\E[4m, vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c,
8267 use=ansi+apparrows, use=ansi+csr, use=ansi+erase,
8268 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
8269 use=xterm+kbs, use=vt220+pcedit, use=xterm+alt1049,
8270 use=ecma+color, use=vt100+enq, use=vt100+4bsd,
8272 screen|VT 100/ANSI X3.64 virtual terminal,
8275 no+brackets|cancel bracketed paste,
8278 # The bce and status-line entries are from screen 3.9.13 (and require some
8279 # changes to .screenrc).
8280 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
8283 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
8284 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
8286 # ======================================================================
8287 # Entries for GNU Screen with 16 colors.
8288 # Those variations permit to benefit from 16 colors palette, and from
8289 # bold font and blink attribute separated from bright colors. But they
8290 # are less portable than the generic "screen" 8 color entries: Their
8291 # usage makes real sense only if the terminals you attach and reattach
8292 # do all support 16 color palette.
8294 screen-16color|GNU Screen with 16 colors,
8295 use=ibm+16color, use=screen,
8297 screen-16color-s|GNU Screen with 16 colors and status line,
8298 use=ibm+16color, use=screen-s,
8300 screen-16color-bce|GNU Screen with 16 colors and BCE,
8301 use=ibm+16color, use=screen-bce,
8303 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
8304 bce, use=ibm+16color, use=screen-s,
8306 # ======================================================================
8307 # Entries for GNU Screen 4.02 with --enable-colors256.
8309 screen-256color|GNU Screen with 256 colors,
8310 use=xterm+256setaf, use=screen,
8312 screen-256color-s|GNU Screen with 256 colors and status line,
8313 use=xterm+256setaf, use=screen-s,
8315 screen-256color-bce|GNU Screen with 256 colors and BCE,
8316 use=xterm+256setaf, use=screen-bce,
8318 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
8319 bce, use=xterm+256setaf, use=screen-s,
8321 screen.xterm-256color|GNU Screen with xterm using 256 colors,
8322 use=xterm+256setaf, use=screen.xterm-new,
8324 screen.konsole-256color|GNU Screen with konsole using 256 colors,
8325 XR@, use=xterm+256setaf, use=screen.konsole,
8327 screen.vte-256color|GNU Screen with vte using 256 colors,
8328 use=xterm+256setaf, use=screen.vte,
8330 screen.putty-256color|GNU Screen with putty using 256 colors,
8331 use=xterm+256setaf, use=screen.putty,
8333 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
8334 XR@, use=xterm+256setaf, use=screen.mlterm,
8336 # ======================================================================
8338 # Read the fine manpage:
8339 # When screen tries to figure out a terminal name for
8340 # itself, it first looks for an entry named "screen.<term>",
8341 # where <term> is the contents of your $TERM variable. If
8342 # no such entry exists, screen tries "screen" (or "screen-w"
8343 # if the terminal is wide (132 cols or more)). If even this
8344 # entry cannot be found, "vt100" is used as a substitute.
8346 # Notwithstanding the manpage, screen uses its own notion of the termcap
8347 # and some keys from "screen.<term>" are ignored. Here is an entry which
8348 # covers those (tested with screen 4.00.02) -TD
8349 screen+fkeys|function-keys according to screen,
8350 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
8353 # See explanation before "screen" entry. Cancel italics so that applications
8354 # do not assume screen supports the feature. Add this tweak to entries which
8355 # extend screen for terminals which do support italics.
8356 screen+italics|screen cannot support italics,
8359 # Here are a few customized entries which are useful -TD
8362 # (a) screen does not support invis.
8363 # (b) screen's implementation of bw is incorrect according to tack.
8364 # (c) screen appears to hardcode the strings for khome/kend, making it
8365 # necessary to override the "use=" clause's values (screen+fkeys).
8366 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
8367 # which is NOT the same as the terminfo screen.<term>.
8368 # (e) when screen finds one of these customized entries, it sets $TERM to
8369 # match. Hence, no "screen.xterm" entry is provided, since that would
8370 # create heartburn for people running remote xterm's.
8371 # (f) screen does not support rep.
8372 # (g) the xterm-new compatibility does not include bracketed paste.
8374 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
8375 # since the default translations override the built-in keycode
8376 # translation. They are suppressed here to show what is tested by tack.
8377 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
8379 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
8380 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8381 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
8382 E3@, use=screen+italics, use=screen+fkeys,
8383 use=xterm+x11mouse, use=ecma+index, use=ansi+rep,
8384 use=ecma+strikeout, use=xterm+pcfkeys,
8387 # Don't use this, because not everyone has "screen.xterm-new":
8388 #:screen.xterm|screen for modern xterm,
8389 #: use=screen.xterm-new,
8391 # xterm-r6 does not really support khome/kend unless it is propped up by
8392 # the translations resource.
8393 screen.xterm-r6|screen customized for X11R6 xterm,
8394 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
8395 # Color applications running in screen and TeraTerm do not play well together
8396 # on Solaris because Sun's curses implementation gets confused.
8397 screen.teraterm|disable ncv in teraterm,
8399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
8400 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
8401 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
8402 use=screen+fkeys, use=xterm+x11mouse, use=screen,
8404 screen.rxvt|screen in rxvt,
8406 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8407 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
8408 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
8410 screen.Eterm|screen in Eterm,
8411 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
8412 screen.mrxvt|screen in mrxvt,
8413 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
8414 screen.vte|screen in any VTE-based terminal,
8415 use=xterm+x11mouse, use=screen+italics,
8416 use=screen+fkeys, use=no+brackets, use=vte,
8417 screen.gnome|screen in GNOME Terminal,
8418 use=xterm+x11mouse, use=screen+italics,
8419 use=screen+fkeys, use=no+brackets, use=gnome,
8420 screen.konsole|screen in KDE console window,
8421 XR@, use=xterm+x11mouse, use=screen+italics,
8422 use=screen+fkeys, use=no+brackets, use=konsole,
8423 # fix the backspace key
8424 screen.linux|screen.linux-s|screen in Linux console,
8426 kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
8427 use=screen+fkeys, use=screen,
8428 screen.mlterm|screen in mlterm,
8429 XR@, use=xterm+x11mouse, use=screen+fkeys,
8430 use=no+brackets, use=mlterm,
8431 screen.putty|screen in putty,
8432 use=xterm+x11mouse, use=screen+fkeys, use=no+brackets,
8435 # The default "screen" entry is reasonably portable, but not optimal for the
8436 # most widely-used terminal emulators. The "bce" capability is supported in
8437 # screen since 3.9.13, and when used, will require fewer characters to be sent
8438 # to the terminal for updates.
8440 # If you are using only terminals which support bce, then you can use this
8441 # feature in your screen configuration.
8443 # Adding these lines to your ".screenrc" file will allow using these customized
8448 screen-bce.xterm-new|screen optimized for modern xterm,
8450 ech@, use=screen+italics, use=screen.xterm-new,
8451 screen-bce.rxvt|screen optimized for rxvt,
8453 ech@, use=screen.rxvt,
8454 screen-bce.Eterm|screen optimized for Eterm,
8456 ech@, use=screen.Eterm,
8457 screen-bce.mrxvt|screen optimized for mrxvt,
8459 ech@, use=screen.mrxvt,
8460 screen-bce.gnome|screen optimized for GNOME-Terminal,
8461 ech@, use=screen+italics, use=screen.gnome,
8462 screen-bce.konsole|screen optimized for KDE console window,
8463 ech@, use=screen+italics, use=screen.konsole,
8464 screen-bce.linux|screen optimized for Linux console,
8466 ech@, use=screen.linux,
8468 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
8469 cols#132, use=screen,
8471 screen2|VT 100/ANSI X3.64 virtual terminal (old 2.x),
8473 clear=\E[2J\E[H, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
8474 ed=\E[J, el=\E[K, ich1=, ind=\n, kbs=^H, kf0=\E~, kf1=\ES,
8475 kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
8476 kf9=\E0I, khome=\EH, nel=\r\n, rc=\E8, ri=\EM, rmso=\E[23m,
8477 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smso=\E[3m,
8478 smul=\E[4m, use=ansi+idc, use=ansi+idl,
8479 use=ansi+inittabs, use=ansi+local, use=vt52+arrows,
8481 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
8482 screen3|VT 100/ANSI X3.64 virtual terminal (old 3.x),
8485 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
8486 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch=\E[%p1%dP,
8487 dch1=\E[P, home=\E[H, ich=\E[%p1%d@, ind=\n, is2=\E)0,
8488 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8489 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rev=\E[7m,
8490 ri=\EM, rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m,
8491 rs1=\Ec, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
8492 smul=\E[4m, use=ansi+csr, use=ansi+erase, use=ansi+idl,
8493 use=ansi+inittabs, use=ansi+local,
8495 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
8496 # was last updated in 2009 to include 256-color support. The most recent
8497 # release is 4.6.2 (October 2017).
8498 screen4|VT 100/ANSI X3.64 virtual terminal (4.x),
8499 use=ecma+index, use=screen-base,
8501 # As of December 2022, screen 5.0 has not been released.
8505 # https://savannah.gnu.org/bugs/?36676
8507 # mentions a change to implement italics which should be in a version 5,
8508 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the
8509 # longstanding use of SGR 3 for standout, and interprets it as italics.
8511 # The same development branch has some support for direct-colors, but none
8512 # of this has been documented.
8513 screen5|VT 100/ANSI X3.64 virtual terminal (someday),
8515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8516 %p5%t;2%;m%?%p9%t\016%e\017%;,
8517 smso=\E[7m, use=ecma+italics, use=ecma+index,
8522 # tmux is mostly compatible with screen, but has support for italics, and some
8523 # of the xterm cursor bits.
8525 # However, unlike screen, tmux has no provision for using derived terminal
8526 # descriptions. When screen starts, it looks for a suitable "inner" terminal
8527 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
8528 # various entries such as screen.xterm-new provide a way to more closely
8529 # match the terminal.
8530 tmux|tmux terminal multiplexer,
8531 invis=\E[8m, rmso=\E[27m,
8532 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8533 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8534 smso=\E[7m, E3=\E[3J, Smulx=\E[4:%p1%dm,
8535 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
8536 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
8537 use=screen, use=bracketed+paste, use=report+version,
8540 tmux-256color|tmux with 256 colors,
8541 use=xterm+256setaf, use=tmux,
8543 tmux-direct|tmux with direct-color indexing,
8544 use=kitty+setal, use=xterm+direct, use=tmux,
8550 # mosh's DA1 identifies it as a VT220, but sets $TERM to "xterm" or
8551 # "xterm-256color" (hard-coded), which in its pretense that it is xterm, is
8552 # several years out of date.
8554 # There is little documentation; the existing manpages amount to a quarter of
8555 # the length of mosh.org's heavily promotional website. This entry is based
8556 # on testing, and reading the source-code. For the latter, analysis is aided
8557 # by the developer's extensive use of hard-coded strings.
8559 # The website has an example "Tricky unicode", which shows a shell command
8560 # with a typo (i.e., assuming that a byte in octal uses 4 digits) and suggests
8561 # that mosh and OS X Terminal "gets it right".
8563 # The example as shown would not work. Correcting the typo, xterm gives the
8564 # result expected by the mosh developer.
8566 # The other examples follow in a similar vein.
8568 # It does not support these xterm features:
8569 # use=ansi+rep (xterm patch #36, 1997)
8570 # use=ecma+strikeout (xterm patch #305, 2014)
8571 # use=vt420+lrmm (xterm patch #279, 2012)
8572 # titlestack in smcup/rmcup has no effect (xterm patch #251, 2009)
8573 # does not support "dim" (xterm patch #305, 2014)
8575 # rmkx/smkx has no effect on numeric keypad
8576 # acs stuff has no effect, is included here for ease of comparison
8578 # Unlike screen and tmux, mosh has only limited awareness of a terminal
8579 # description. It assumes that the underlying terminal is xterm, and would
8580 # not work well with terminals using other key-definitions, such as urxvt.
8583 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8584 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
8585 sgr0=\E(B\E[m, use=ansi+enq, use=xterm+meta,
8586 use=ecma+italics, use=ecma+index, use=xterm+acs,
8587 use=xterm+focus, use=xterm+sm+1006, use=xterm+pcfkeys,
8588 use=xterm-xfree86, use=bracketed+paste,
8590 mosh-256color|mosh using 256-colors,
8591 use=xterm+256color, use=mosh,
8596 # http://www.brain-dump.org/projects/dvtm/
8598 # + This uses ncurses to manage the display, including support for italics and
8600 # + However, default-colors are incomplete: do not set bce.
8601 # + It does not implement flash (since no \e[?5h)
8602 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
8603 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
8604 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
8605 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
8607 # + It also omits the shifted cursor- and editing-keypad keys.
8608 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
8609 # (and passes those through without interpretation)
8610 # and may simply pass-through rxvt's, making it appear to work.
8611 # In other cases such as kf23 and up, no pass-through is done.
8612 # + Most of the mode-settings in the initialization/reset strings are not
8613 # implemented; dvtm copies its description from rxvt.
8614 dvtm|dynamic virtual terminal manager,
8617 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cub1=^H, cud1=\n,
8618 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, el1=\E[1K,
8619 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
8620 is1=\E[?47l\E=\E[?1l,
8621 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
8622 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
8623 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
8624 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kel=\E[8\^,
8625 kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
8626 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8627 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8628 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$,
8629 kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
8630 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8631 khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, rev=\E[7m,
8632 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8633 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
8634 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
8636 s0ds=\E(B, s1ds=\E(0,
8637 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
8639 sgr0=\E[m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
8640 vpa=\E[%i%p1%dd, use=ansi+arrows, use=ansi+csr,
8641 use=ansi+idl, use=ansi+local, use=xterm+alt47,
8642 use=vt220+vtedit, use=vt220+cvis, use=ecma+color,
8643 use=ecma+italics, use=vt100+4bsd,
8645 dvtm-256color|dynamic virtual terminal manager with 256 colors,
8646 colors#0x100, pairs#0x10000,
8647 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
8649 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
8655 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
8656 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
8657 # been maintained until recently by the National Center for Supercomputer
8658 # Applications, and it is feature rich, stable and free. It can be downloaded
8659 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
8660 # xterm+sl, and the docs at NCSA. It works well.
8662 # NCSA Telnet 2.6 for Macintosh in VT220 8-bit emulation mode
8663 # The terminal options should be set as follows:
8664 # Xterm sequences ON
8665 # use VT wrap mode ON
8666 # use Emacs arrow keys OFF
8667 # CTRL-COMND is Emacs meta ON
8669 # answerback string: "ncsa-vt220-8"
8670 # setup keys: all disabled
8672 # Application mode is not used.
8674 # Other special mappings:
8681 # PAGEDOWN Next Screen
8683 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
8686 # The status-line manipulation is a mapping of the xterm-compatible control
8687 # sequences for setting the window-title. So you must use tsl and fsl in
8688 # pairs, since the latter ends the string that is loaded to the window-title.
8689 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in VT220-8 mode,
8690 am, km, mir, msgr, xenl,
8691 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8692 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
8693 dch1=\E[P, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
8694 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8695 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
8697 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>,
8698 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
8699 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
8700 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
8701 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
8702 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
8703 rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
8704 rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, rmso=\E[27m,
8706 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>,
8707 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
8709 sgr0=\E[m\E(B, smam=\E[?7h, smcup=\E7, smir=\E[4h,
8710 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u8=\E[?62;1;6c,
8711 use=ansi+arrows, use=ansi+csr, use=ansi+idl,
8712 use=ansi+local, use=vt220+cvis, use=xterm+acs,
8713 use=xterm+sl, use=ansi+enq,
8715 ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color),
8716 use=ncsa-m, use=klone+color,
8717 ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line),
8719 dsl@, fsl@, tsl@, use=ncsa,
8720 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line),
8722 dsl@, fsl@, tsl@, use=ncsa-m,
8724 # The documented function-key mapping refers to the Apple Extended Keyboard
8725 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
8726 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
8727 # some keyboards and many applications require these as F1-F4.
8729 ncsa-vt220|NCSA Telnet using VT220-compatible function keys,
8730 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8731 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8732 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
8733 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
8734 kf8=\E[19~, kf9=\E[20~, use=ncsa,
8736 #### Pilot Pro Palm-Top
8738 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
8739 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
8740 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
8743 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
8744 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
8745 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
8748 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
8749 # These entries are for the Embeddable Linux Kernel System (ELKS)
8750 # project - an heavily stripped down Linux to be run on 16 bit
8751 # boxes or, eventually, to be used in embedded systems - and have been
8752 # adapted from the stock ELKS termcap. The project itself looks stalled,
8753 # and the latest improvements I know of date back to March 2000.
8755 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
8756 # as an added bonus, this deals with all the capabilities common to
8757 # both VT52 and ANSI (or, eventually, "special") modes.
8759 elks-glasstty|ELKS glass-TTY capabilities,
8761 cols#80, it#8, lines#25,
8762 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
8765 elks-vt52|ELKS VT52 console,
8766 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8767 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
8768 home=\EH, use=elks-glasstty,
8770 elks-ansi|ELKS ANSI console,
8771 clear=\E[H\E[2J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8772 el=\E[K, home=\E[H, use=ansi+local1, use=ansi+sgrso,
8775 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
8776 # instead of VT52, but the "elks" entry still refers to the latter.
8778 elks|default ELKS console,
8781 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
8782 # one but in screen size
8784 sibo|ELKS SIBO console,
8785 cols#61, it#8, lines#20, use=elks-vt52,
8787 ######## COMMERCIAL WORKSTATION CONSOLES
8793 # This is from the OSF/1 Release 1.0 termcap file
8794 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
8797 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8798 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8799 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, nel=\r\n,
8800 rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8806 # :is1: resets scrolling region in case a previous user had used "tset VT100"
8807 oldsun|Sun Microsystems Workstation console,
8808 OTbs, am, km, mir, msgr,
8809 cols#80, it#8, lines#34,
8810 bel=^G, clear=^L, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
8811 dch=\E[%p1%dP, dch1=\E[P, ed=\E[J, el=\E[K, ht=^I,
8812 ich=\E[%p1%d@, ich1=\E[@, ind=\n, is1=\E[1r, kcub1=\E[D,
8813 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
8814 kf3=\EOR, kf4=\EOS, khome=\E[H, rmso=\E[m, sgr0=\E[m,
8815 smso=\E[7m, use=ansi+idl, use=ansi+local1,
8817 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
8818 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
8819 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
8820 sun-il|Sun Microsystems console with working insert-line,
8823 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8824 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8825 dch1=\E[P, ed=\E[J, el=\E[K, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
8826 ind=\n, kb2=\E[218z, kdch1=^?, kend=\E[220z, kf1=\E[224z,
8827 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
8828 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
8829 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
8830 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
8831 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
8832 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8833 smso=\E[7m, u8=\E[1t, u9=\E[11t, use=ansi+arrows,
8836 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
8837 # flake out on the last line. Unfortunately, without them the terminal has no
8839 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
8840 il@, il1@, use=sun-il,
8842 # The Sun console was documented in the wscons manual page (apparently
8843 # unrelated to the "wscons" used by some of the BSDs).
8845 # https://illumos.org/man/4D/wscons
8846 # https://www.bitsavers.org/pdf/sun/sun1/800-0345_Sun-1_System_Reference_Manual_Jul82.pdf
8848 # The early cmdtool and shelltool programs in Sun's NeWS were based on this.
8849 # After NeWS was discontinued, XView provided a similar shelltool, with an
8850 # incomplete manual page. Presumably the intent was to document features of
8851 # shelltool not in wscons:
8853 # https://manpages.ubuntu.com/manpages/bionic/en/man1/shelltool.1.html
8854 # https://manpages.ubuntu.com/manpages/bionic/en/man1/cmdtool.1.html
8856 # The wscons manual page and the XView source show that it had no feature that
8857 # could be used in ncurses u6/u7/u8/u9 extensions. Interesting, the XView
8858 # source shows that its shelltool could tell the host what a particular mode
8859 # was set to. But neither that nor its CSI..t controls support u6/u7/u8/u9.
8861 # If you are using an SS5, change the sun definition to use sun-ss5.
8862 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
8865 sun+sl|Sun Workstation window status line,
8867 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
8869 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
8870 sun-s|Sun Microsystems Workstation window with status line,
8871 use=sun+sl, use=sun,
8872 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
8873 use=sun+sl, use=sun-e,
8874 sun-48|Sun 48-line window,
8875 cols#80, lines#48, use=sun,
8876 sun-34|Sun 34-line window,
8878 sun-24|Sun 24-line window,
8879 cols#80, lines#24, use=sun,
8880 sun-17|Sun 17-line window,
8881 cols#80, lines#17, use=sun,
8882 sun-12|Sun 12-line window,
8883 cols#80, lines#12, use=sun,
8884 sun-1|Sun 1-line window for sysline,
8887 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
8888 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
8889 ich1@, rmir@, smir@, use=sun,
8890 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
8892 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
8893 sun-type4|Sun Workstation console with type 4 keyboard,
8894 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
8895 kcuu1=\E[215z, use=sun-il,
8897 # Most of the current references to sun-color are from users wondering why this
8898 # is the default on install. Details from reading the wscons manpage, adding
8899 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
8900 # when those were added -TD (2005-05-28)
8902 # According to wscons manpage, color is supported only on IA systems.
8903 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
8904 # does not list these. It also sets ncv#3, however that corresponds to
8905 # underline and standout.
8907 # Since the documentation and terminfo do not agree, see also current code at
8908 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
8910 # That (actually a different driver which "supports" sun-color) also supports
8917 # It supports bold, but not underline -TD (2009-09-19)
8918 sun-color|Sun Microsystems Workstation console with color support (IA systems),
8919 bold=\E[1m, cub1=^H, cud1=\n, home=\E[H, op=\E[0m,
8920 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8922 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8924 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, use=ansi+local,
8925 use=sun, use=klone+color,
8930 # (wsiris: this had extension capabilities
8931 # :HS=\E7F2:HE=\E7F7:\
8932 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
8933 # See the note on Iris extensions near the end of this file.
8934 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
8935 # <flash> from BRL -- esr)
8936 wsiris|iris40|IRIS emulating a 40 line Visual 50 (approximately),
8937 OTbs, OTnc, OTpt, am,
8938 OTkn#3, cols#80, it#8, lines#40,
8939 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
8940 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8941 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
8942 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
8943 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kf0=\E0, kf1=\E1,
8944 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
8945 kf9=\E9, ri=\EI, rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7,
8946 smso=\E9P, smul=\E7R2\E9P, use=vt52+arrows,
8950 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
8951 # environment). Note: these have nothing to do with Sony's News workstation
8955 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
8956 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
8957 psterm|psterm-basic|NeWS psterm-80x34,
8958 OTbs, am, hs, km, ul,
8959 cols#80, it#8, lines#34,
8960 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
8961 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
8962 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
8963 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
8964 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
8965 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
8966 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
8968 psterm-96x48|NeWS psterm 96x48,
8969 cols#96, lines#48, use=psterm,
8970 psterm-90x28|NeWS psterm 90x28,
8971 cols#90, lines#28, use=psterm,
8972 psterm-80x24|NeWS psterm 80x24,
8973 cols#80, lines#24, use=psterm,
8974 # This is a faster termcap for psterm. Warning: if you use this termcap,
8975 # some control characters you type will do strange things to the screen.
8976 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
8977 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
8978 OTbs, am, hs, km, ul,
8979 cols#80, it#8, lines#34,
8980 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
8981 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
8982 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
8983 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8984 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
8985 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
8986 smso=^Oo, smul=^Ou, tsl=^Ol,
8990 # Use `glasstty' for the Workspace application
8993 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
8996 cols#80, it#8, lines#24,
8997 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8998 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8999 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9000 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
9001 nextshell|NeXT Shell application,
9004 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
9007 #### Sony NEWS workstations
9010 # (news-unk: this had :KB=news: -- esr)
9011 news-unk|Sony NEWS VT100 emulator common entry,
9012 OTbs, OTpt, am, xenl,
9014 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
9015 cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9016 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9017 if=/usr/share/tabset/vt100,
9018 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
9019 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
9020 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
9021 kf8=\EOW, kf9=\EOX, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>,
9022 rmso=\E[m, rmul=\E[m,
9023 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sgr0=\E[m,
9024 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, use=ansi+csr,
9027 # (news-29: this had :TY=ascii: --esr)
9028 news-29|Sony NEWS VT100 emulator with 29 lines,
9029 lines#29, use=news-unk,
9030 # (news-29-euc: this had :TY=euc: --esr)
9031 news-29-euc|Sony NEWS VT100 emulator with 29 lines and EUC,
9033 # (news-29-sjis: this had :TY=sjis: --esr)
9034 news-29-sjis|Sony NEWS VT100 emulator with 29 lines and SJIS,
9037 # (news-33: this had :TY=ascii: --esr)
9038 news-33|Sony NEWS VT100 with 33 lines,
9039 lines#33, use=news-unk,
9040 # (news-33-euc: this had :TY=euc: --esr)
9041 news-33-euc|Sony NEWS VT100 with 33 lines and EUC,
9043 # (news-33-sjis: this had :TY=sjis: --esr)
9044 news-33-sjis|Sony NEWS VT100 with 33 lines and SJIS,
9047 # (news-42: this had :TY=ascii: --esr)
9048 news-42|Sony NEWS VT100 with 42 lines,
9049 lines#42, use=news-unk,
9050 # (news-42-euc: this had :TY=euc: --esr)
9051 news-42-euc|Sony NEWS VT100 with 42 lines and EUC,
9053 # (news-42-sjis: this had :TY=sjis: --esr)
9054 news-42-sjis|Sony NEWS VT100 with 42 lines and SJIS,
9057 # NEWS-OS old termcap entry
9059 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
9060 news-old-unk|old Sony NEWS VT100 emulator common entry,
9061 OTbs, OTpt, am, xenl,
9063 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
9064 cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9065 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9066 if=/usr/share/tabset/vt100, kbs=^H, kcub1=\E[D,
9067 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
9068 kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>,
9069 rmso=\E[m, rmul=\E[m,
9070 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
9071 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, use=ansi+csr,
9073 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
9074 nwp512|news|nwp514|news40|vt100-bm|nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|old Sony VT100 emulator 40 lines,
9077 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
9081 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
9082 nwp512-a|nwp514-a|news-a|news42|news40-a|old Sony VT100 emulator 42 line,
9084 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
9087 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
9088 nwp513|nwp518|nwe501|newscbm|news31|nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 31 lines,
9091 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
9095 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
9096 # also the alias vt100-bm.
9097 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old Sony VT100 emulator 33 lines,
9100 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
9104 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
9105 news28|old Sony VT100 emulator 28 lines,
9108 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
9112 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
9113 news29|news28-a|old Sony VT100 emulator 29 lines,
9115 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
9119 # (news511: this had :TY=sjis: --esr)
9120 nwp511|nwp-511|nwp-511 VT100,
9121 OTbs, OTpt, am, xenl,
9123 clear=\E[;H\E[2J$<20/>, cup=\E[%i%p1%d;%p2%dH,
9124 cuu1=\E[A$<2/>, dl1=\E[M, ed=\E[J$<30/>, el=\E[K$<3/>,
9125 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9126 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
9127 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
9128 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
9129 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9130 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
9131 smso=\E[7m$<2/>, smul=\E[4m$<2/>, use=ansi+local1,
9132 # (news517: this had :TY=sjis:. --esr)
9133 nwp517|nwp-517|nwp-517 VT200 80 cols 30 rows,
9135 OTi2=\E[2$~\n, dsl=\E[1$~,
9136 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9137 tsl=\E[1$}\E[;%df, use=dec+sl, use=vt220-base,
9138 # (news517-w: this had :TY=sjis:. --esr)
9139 nwp517-w|nwp-517-w|nwp-517 VT200 132 cols 50 rows,
9142 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
9143 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
9144 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
9145 tsl=\E[1$}\E[;%df, use=vt220-base,
9147 #### Common Desktop Environment
9150 # This ships with Sun's CDE in Solaris 2.5
9151 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
9152 dtterm|CDE desktop terminal,
9153 am, mir, msgr, xenl, xon,
9154 cols#80, it#8, lines#24, lm#0, ncv@,
9155 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9156 bel=^G, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
9157 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
9158 dim=\E[2m, ech=\E[%p1%dX, el1=\E[1K, enacs=\E(B\E)0,
9159 flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=^I, hts=\EH,
9160 ich=\E[%p1%d@, ind=\ED, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
9161 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9162 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9163 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9164 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
9165 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
9166 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9167 khlp=\E[28~, nel=\EE, ri=\EM, rmacs=^O, rmam=\E[?7l,
9168 rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
9169 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9170 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9171 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9172 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ansi+csr,
9173 use=ansi+erase, use=ansi+idl, use=ansi+local,
9174 use=ansi+sgr, use=decid+cpr, use=vt220+vtedit,
9175 use=vt220+cvis, use=ecma+color,
9177 ######## Non-Unix Consoles
9180 #### EMX termcap.dat compatibility modes
9182 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
9183 # no_color_video to inform the application that standout(1), underline(2)
9184 # reverse(4) and invisible(64) don't work with color.
9185 emx-base|DOS special keys,
9188 bel=^G, use=ansi.sys,
9190 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
9191 # a Unix-style environment used on OS/2. (Note that the suffix makes some
9192 # names longer than 14 characters, the nominal maximum).
9194 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
9195 ansi-emx|ANSI.SYS color,
9197 clear=\E[1;33;44m\E[H\E[J, cr=\r, cud1=\n, dch=\E[%p1%dp,
9198 ed=\E[J, flash=\E[?5h$<100/>\E[?5l, ht=^I, hts=\EH,
9199 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kf0=\0D, kll=\0O,
9200 kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
9201 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
9202 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smso=\E[0;31;47m,
9203 smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, u9=\E[c,
9204 use=vt220+cvis, use=emx-base,
9205 # nice colors for Emacs (white on blue, mode line white on cyan)
9206 ansi-color-2-emx|ANSI.SYS color 2,
9207 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
9208 rmso=\E[0;37;44m, rmul=\E[0;37;44m, sgr0=\E[0;37;44m,
9209 smso=\E[1;37;46m, smul=\E[1;36;44m, use=ansi-emx,
9210 # nice colors for Emacs (white on black, mode line black on cyan)
9211 ansi-color-3-emx|ANSI.SYS color 3,
9212 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
9213 rmso=\E[0;37;40m, rmul=\E[0;37;40m, sgr0=\E[0;10m,
9214 smso=\E[1;37;46m, smul=\E[0;36;40m, use=ansi-emx,
9215 mono-emx|stupid monochrome ANSI terminal with only one kind of emphasis,
9217 cols#80, it#8, lines#24,
9218 clear=\E[H\E[2J$<50>, cup=\E[%i%p1%d;%p2%dH, el=\E[K,
9219 home=\E[H, ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P,
9220 kcuf1=\0M, kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=,
9221 kf4=\0>, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C,
9222 khome=\0G, kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n,
9223 rev=\E[7m, sgr0=\E[0m, use=ansi+local1,
9227 # Use this for cygwin32 (tested with beta 19.1)
9228 # underline is colored bright magenta
9229 # shifted kf1-kf12 are kf11-kf22
9230 cygwinB19|ANSI emulation for cygwin32,
9231 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
9232 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9233 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9234 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
9235 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
9236 kf8=\E[19~, kf9=\E[20~, rmam@, smam@, use=vt220+pcedit,
9239 # Use this for cygwin (tested with version 1.1.0).
9240 # I've combined pcansi and linux. Some values of course were different and
9241 # I've indicated which of these were and which I used.
9242 # Cheers, earnie_boyd@yahoo.com
9243 # several changes based on running with tack and comparing with older entry -TD
9244 # more changes from csw:
9246 # remove eo [erase overstrike with blank]
9247 # change clear was \E[H\E[J now \E[2J (faster?)
9250 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
9252 # add cub [cursor back param]
9253 # add cuf [cursor forward param]
9254 # add cuu [cursor up param]
9255 # add cud [cursor down param]
9256 # add hs [has status line]
9257 # add fsl [return from status line]
9258 # add tsl [go to status line]
9259 # add smacs [Start alt charset] (not sure if this works)
9260 # add rmacs [End alt charset] (ditto)
9261 # add smcup [enter_ca_mode] (save console; thanks Corinna)
9262 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
9263 # add kb2 [center of keypad]
9264 # add u8 [user string 8] \E[?6c
9265 # add el [clear to end of line] \E[K
9267 # cnorm [make cursor normal] not implemented
9268 # flash [flash] not implemented
9269 # blink [blink] not implemented very usefully in cygwin? \E[5m
9270 # dim [dim] not implemented very usefully in cygwin? \E[2m
9271 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
9272 # kNXT [shifted next key] not implemented
9273 # kPRV [shifted prev key] not implemented
9274 # khome [home key] really is \E[1~ NOT \E[H
9275 # tbc [clear tab stops] not implemented
9276 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
9277 # smpch [Start PC charset] is \E[11m, same as smacs
9278 # rmpch [End PC charset] is \E[10m, same as rmacs
9279 # mir [move in insert mode] fails in tack?
9280 # bce [back color erase] causes problems with change background color?
9281 # cvvis [make cursor very visible] causes a stackdump when testing with
9282 # testcurs using the output option? \E[?25h\E[?8c
9283 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
9284 # ech [erase characters param] broken \E[%p1%dX
9285 # kcbt [back-tab key] not implemented in cygwin? \E[Z
9288 # Remove cbt since it does not work in current cygwin
9289 # Add 'mir' and 'in' flags based on tack
9290 cygwin|ANSI emulation for Cygwin,
9291 am, hs, mir, msgr, xon,
9292 colors#8, it#8, pairs#64,
9293 bel=^G, bold=\E[1m, cr=\r, cub=\E[%p1%dD, cub1=^H,
9294 cup=\E[%i%p1%d;%p2%dH, el1=\E[1K, fsl=^G, home=\E[H, ht=^I,
9295 ind=\n, invis=\E[8m, kb2=\E[G, kf1=\E[[A, kf10=\E[21~,
9296 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9297 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9298 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
9299 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9300 khome=\E[1~, kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8,
9301 rev=\E[7m, ri=\EM, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
9302 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9303 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
9304 %t;8%;%?%p9%t;11%;m,
9305 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
9306 tsl=\E];, use=ansi+arrows, use=ansi+erase, use=ansi+idc,
9307 use=ansi+idl, use=ansi+local, use=ansi+rca2,
9308 use=vt220+pcedit, use=vt102+enq, use=klone+acs,
9311 # I've supplied this so that you can help test new values and add other
9312 # features. Cheers, earnie_boyd@yahoo.com.
9314 # Some features are from pcansi. The op value is from linux. Function-keys
9315 # are from linux. These have been tested not to cause problems. xenl was in
9316 # this list, but DOES cause problems so it has been removed
9317 cygwinDBG|Debug Version for Cygwin,
9318 am, eo, mir, msgr, xon,
9319 cols#80, lines#24, ncv#3,
9320 bel=^G, cr=\r, cup=\E[%i%p1%d;%p2%dH, dim=\E[2m, el1=\E[1K,
9321 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
9322 ind=\n, kNXT=\E[6$, kPRV=\E[5$, kb2=\E[G, kcbt=\E[Z,
9323 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9324 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9325 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
9326 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
9327 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kspd=^Z,
9328 nel=\r\n, op=\E[39;49m, rc=\E8, ri=\EM, rs1=\Ec\E]R, sc=\E7,
9329 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9330 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
9331 sgr0=\E[0;10m, vpa=\E[%i%p1%dd, use=ansi+arrows,
9332 use=ansi+erase, use=ansi+idc, use=ansi+idl,
9333 use=ansi+inittabs, use=ansi+local, use=ansi+sgrbold,
9334 use=klone+acs, use=klone+color, use=vt220+pcedit,
9335 use=vt220+cvis, use=vt102+enq,
9340 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
9341 # encodings used by other x86 environments. All others are invented for DJGPP.
9342 # Oddly enough, while several combinations of modifiers are tabulated, there is
9343 # none for shifted cursor keys.
9395 # Ctrl-Delete \E[43~
9396 # Ctrl-Down Arrow \E[38~
9399 # Ctrl-Insert \E[42~
9400 # Ctrl-Left Arrow \E[39~
9401 # Ctrl-Page Down \E[46~
9402 # Ctrl-Page Up \E[45~
9403 # Ctrl-Right Arrow \E[40~
9404 # Ctrl-Up Arrow \E[37~
9420 # Alt-Down Arrow \E[60~
9424 # Alt-Left Arrow \E[61~
9425 # Alt-Page Down \E[68~
9426 # Alt-Page Up \E[67~
9427 # Alt-Right Arrow \E[62~
9428 # Alt-Up Arrow \E[59~
9457 djgpp|ANSI emulation for DJGPP alpha,
9458 am, bce, msgr, xhp, xon, xt,
9459 colors#8, it#8, pairs#64,
9460 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9461 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9462 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9463 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[1v, cnorm=\E[v, cr=\r,
9464 cub1=^H, cup=\E[%i%p1%d;%p2%dH, cvvis=\E[2v,
9465 dch=\E[%p1%dP, dch1=\E[P, ech=\E[%p1%dX, el1=\E[1K,
9466 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
9467 ich1=\E[@, ind=\E[S, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
9468 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
9469 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9470 khome=\E[1~, nel=\r\n, op=\E[37;40m, ri=\E[T, rmso=\E[m,
9471 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9472 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
9473 %p6%t;1%;%?%p7%t;8%;m,
9474 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9475 use=ansi+arrows, use=ansi+erase, use=ansi+idl,
9476 use=ansi+local, use=ansi+sgr, use=vt220+pcedit,
9479 djgpp203|entry for DJGPP 2.03,
9481 cols#80, it#8, lines#25,
9482 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
9485 djgpp204|entry for DJGPP 2.04,
9487 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
9488 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9489 clear=\E[H\E[2J, cnorm=\E[v, cr=\r,
9490 cup=\E[%i%p1%d;%p2%dH, cvvis=\E[2v, dch=\E[%p1%dP,
9491 dch1=\E[P, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9492 ich=\E[%p1%d@, ich1=\E[@, ind=\E[S, invis=\E[8m,
9493 kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, kf3=\E[[C,
9494 kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9495 kf9=\E[20~, khome=\E[1~, kll=\E[4~, nel=\r\n, rev=\E[7m,
9496 ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9497 sgr0=\E[m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
9498 use=ansi+idl, use=ansi+local, use=vt220+pcedit,
9503 # This is tested using U/Win's telnet. Scrolling is omitted because it is
9504 # buggy. Another odd bug appears when displaying "~" in alternate character
9505 # set (the emulator spits out error messages). Compare with att6386 -TD
9506 uwin|U/Win 3.2 console,
9507 am, eo, in, msgr, xenl, xon,
9509 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
9510 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
9511 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
9512 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
9513 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dim=\E[2m,
9514 ech=\E[%p1%dX, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
9515 kdch1=^?, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
9516 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
9517 kf7=\EOV, kf8=\EOW, kf9=\EOX, kich1=\E[@, nel=\r\n,
9518 op=\E[39;49m, rc=\E8, rev=\E[7m, rmacs=\E[10m,
9519 rmpch=\E[10m, rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
9520 sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
9521 smul=\E[4m, tbc=\E[3g, use=ansi+arrows, use=ansi+cpr,
9522 use=ansi+erase, use=ansi+idc, use=klone+color,
9525 #### Microsoft (miscellaneous)
9527 # This entry fits the Windows NT console when the _POSIX_TERM environment
9528 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
9529 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
9530 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
9531 # systems is not, and (surprise!) they match very well.
9533 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
9534 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
9535 # are the installation instructions a pile of mind-numbing bureaucratese,
9536 # but the termcap entry is actually broken and unusable as given; the :do:
9537 # capability is misspelled "d".
9539 # To use this, you need to a bunch of environment variables:
9541 # SET _POSIX_TERM=on
9543 # SET TERMCAP=location of termcap file in POSIX file format
9544 # which is case-sensitive.
9545 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
9548 # Important note: setting the TMP environment variable in POSIX style renders
9549 # it incompatible with a lot of other applications, including Visual C++. So
9550 # you should have a separate command window just for vi. All the other
9551 # variables may be permanently set in the Control Panel\System applet.
9553 # You can find out more about the restrictions of this facility at
9554 # <https://jeffpar.github.io/kbarchive/kb/108/Q108581/>
9556 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
9557 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
9559 cols#80, it#8, lines#25,
9560 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
9561 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
9562 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
9563 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
9564 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
9565 # From: jew@venus.sunquest.com
9566 # Date: 19 Feb 93 23:41:07 GMT
9567 # Here's a combination of ansi and vt100 termcap
9568 # entries that works nearly perfectly for me
9569 # (Gateway 2000 Handbook and Microsoft Works 3.0):
9570 pcmw|PC running Microsoft Works,
9572 cols#80, it#8, lines#24, vt#3,
9573 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
9574 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
9575 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
9576 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
9577 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
9578 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9579 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
9580 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
9581 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9582 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9583 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
9586 # From: Federico Bianchi
9587 # This is the entry for the OpenNT terminal.
9588 # The ntconsole name is for backward compatibility.
9589 # This is for OpenNT 2.0 and later.
9590 # Later OpenNT was renamed to Interix.
9592 # Presently it is distributed by Microsoft as Services For Unix (SFU).
9593 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
9594 # the documentation dated from 1.9.9e) -TD
9596 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
9597 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
9598 # kf13-kf24 use the shift-key
9599 # kf25-kf36 use the left alt-key
9600 # kf37-kf38 use the control-key
9601 # kf49-kf60 use the shift- and control-keys
9602 # The shifted cursor keys send the sequences originally used for kf61-kf64:
9605 # left=\EF^ (unassigned)
9608 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
9610 cols#80, it#8, lines#25,
9611 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9612 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9613 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9614 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cud1=\n,
9615 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9616 ind=\E[S, kLFT=\EF\^, kRIT=\EF$, kcbt=\E[Z, kdch1=^?,
9617 kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB,
9618 kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG,
9619 kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK,
9620 kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP,
9621 kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3,
9622 kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY,
9623 kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd,
9624 kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh,
9625 kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn,
9626 kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr,
9627 kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw,
9628 kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7,
9629 kf8=\EF8, kf9=\EF9, kich1=\E[L, kind=\EF+, kll=\E[U,
9630 knp=\E[T, kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m,
9631 rc=\E[u, rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K,
9632 rmso=\E[m, rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m,
9633 smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
9634 use=ansi+idl, use=ansi+local, use=ecma+index,
9637 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
9638 lines#35, use=opennt,
9640 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
9641 lines#50, use=opennt,
9643 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
9644 lines#60, use=opennt,
9646 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
9647 lines#100, use=opennt,
9649 # OpenNT wide terminals
9650 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
9651 cols#125, use=opennt,
9653 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
9654 lines#35, use=opennt-w,
9656 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
9657 lines#50, use=opennt-w,
9659 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
9660 lines#60, use=opennt-w,
9662 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
9663 cols#132, use=opennt,
9665 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
9666 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
9667 rmcup@, smcup@, use=opennt,
9669 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
9670 lines#35, use=opennt-nti,
9672 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
9673 lines#50, use=opennt-nti,
9675 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
9676 lines#60, use=opennt-nti,
9678 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
9679 lines#100, use=opennt-nti,
9681 ######## COMMON TERMINAL TYPES
9683 # This section describes terminal classes and maker brands that are still
9684 # quite common, but have proprietary command sets not blessed by ANSI.
9689 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
9690 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
9691 # Acer has a web site at http://www.acer.com.
9693 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
9694 # His comments suggest they were shipped with the system.
9697 # (altos2: had extension capabilities
9698 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9699 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9700 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9701 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9702 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9703 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
9704 # :HL=^AP\r:SP=\E[i:\
9705 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
9706 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
9707 # Comparison with the k* capabilities makes it obvious that the c* things are
9708 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
9709 # :sr: was given as a boolean-- esr)
9710 altos2|alt2|altos-2|Altos II,
9711 cols#80, it#8, lines#24, xmc#0,
9712 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
9713 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
9714 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
9715 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
9716 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
9717 kEOL=^An\r, kcbt=^AK\r, kclr=^AL\r, kdch1=^AM\r, kel=^AN\r,
9718 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9719 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9720 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9721 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9722 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
9723 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
9724 smam=\E[?7h, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
9726 # (altos3: had extension capabilities
9727 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9728 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9729 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9730 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9731 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9732 # :HL=^AP\r:SP=\E[i:\
9733 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
9734 altos3|altos5|alt3|alt5|altos-3|altos-5|Altos III or V,
9735 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
9736 altos4|alt4|altos-4|Altos IV,
9738 # (altos7: had extension capabilities:
9739 # :GG#0:GI=\EH8:GF=\EH7:\
9740 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9741 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9742 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9743 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9744 # Comparison with the k* capabilities makes it obvious that the c* things are
9745 # shift keys. I have renamed them to keys 32 and up accordingly. I have
9746 # also made this entry relative to adm12 in order to give it an <sgr>. The
9747 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
9748 altos7|alt7|Altos VII,
9750 cols#80, lines#24, xmc#0,
9751 acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt,
9752 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9753 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9754 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
9756 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
9757 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
9758 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
9759 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9760 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9761 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9762 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9763 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
9764 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
9765 rmir=\Er, smir=\Eq, use=adm+sgr,
9766 altos7pc|alt7pc|Altos PC VII,
9767 kend=\ET, use=altos7,
9769 #### Hewlett-Packard (hp)
9772 # 8000 Foothills Blvd
9773 # Roseville, CA 95747
9774 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
9775 # 1-(800)-633-3600 (General customer support)
9778 # As of March 1998, HP no longer has any terminals in production.
9779 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
9780 # supported (they still have parts). So are the 2392a and 2394a.
9781 # See the WORKSTATION CONSOLES section for the 700s.
9784 # Generic HP terminal - this should (hopefully) work on any HP terminal.
9785 hpgeneric|hp|Hewlett-Packard generic terminal,
9786 OTbs, OTpt, am, da, db, mir, xhp,
9787 cols#80, lines#24, lm#0, vt#6,
9788 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9789 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
9790 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
9791 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
9792 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
9795 hp110|Hewlett-Packard model 110 portable,
9796 lines#16, use=hpgeneric,
9798 hp+pfk+cr|HP function keys with CR,
9799 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
9800 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
9802 hp+pfk-cr|HP function keys w/o CR,
9803 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
9806 # The hp2621s use the same keys for the arrows and function keys,
9807 # but not separate escape sequences. These definitions allow the
9808 # user to use those keys as arrow keys rather than as function
9810 hp+pfk+arrows|HP alternate arrow definitions,
9811 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
9812 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
9813 kll=\Eq\r, kri=\Es\r,
9815 hp+arrows|HP arrow definitions,
9816 khome=\Eh, kind=\ES, kll=\EF, kri=\ET, use=vt52+arrows,
9818 # Generic stuff from the HP 262x series
9820 hp262x|HP 262x terminals,
9822 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
9823 invis=\E&dS, ip=$<2>, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
9824 khome=\Eh, kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV,
9825 kri=\ET, krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@,
9827 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9828 %;%?%p4%t%{65}%|%;%c,
9829 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
9832 # Note: no <home> on HPs since that homes to top of memory, not screen.
9833 # Due to severe 2621 braindamage, the only way to get the arrow keys to
9834 # transmit anything at all is to turn on the function key labels
9835 # with <smkx>, and even then the user has to hold down shift!
9836 # The default 2621 turns off the labels except when it has to to
9837 # enable the function keys. If your installation prefers labels
9838 # on all the time, or off all the time (at the "expense" of the
9839 # function keys), use 2621-nl or 2621-wl.
9841 # Note: there are newer ROMs for 2621's that allow you to set
9842 # strap A so the regular arrow keys xmit \EA, etc, as with the
9843 # 2645. However, even with this strap set, the terminal stops
9844 # xmitting if you reset it, until you unset and reset the strap!
9845 # Since there is no way to set/unset the strap with an escape
9846 # sequence, we don't use it in the default.
9847 # If you like, you can use 2621-ba (brain-damaged arrow keys).
9848 hp2621-ba|HP 2621 w/new rom and strap A set,
9849 rmkx@, smkx@, use=hp+arrows, use=hp2621,
9851 # hp2621 with function labels. Most of the time they are off,
9852 # but inside vi, the function key labels appear. You have to
9853 # hold down shift to get them to xmit.
9854 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|HP 2621 w/labels,
9855 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
9859 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
9860 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, smkx=\E&jB, smso=\E&dD,
9861 use=hp+pfk+cr, use=hpgeneric,
9863 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
9864 hp2621p|HP 2621 with printer,
9865 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
9867 hp2621p-a|HP 2621p with fn as arrows,
9868 use=hp+pfk+arrows, use=hp2621p,
9870 # hp2621 with k45 keyboard
9871 hp2621-k45|hp2621k45|k45|HP 2621 with 45 keyboard,
9872 kbs=^H, khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
9875 # 2621 using all 48 lines of memory, only 24 visible at any time.
9876 hp2621-48|HP 48 line 2621,
9878 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
9881 # 2621 with no labels ever. Also prevents vi delays on escape.
9882 hp2621-nl|HP 2621 with no labels,
9883 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
9886 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
9889 hp2621-nt|HP 2621 w/no tabs,
9892 # Hp 2624 B with 4 or 10 pages of memory.
9894 # Some assumptions are made with this entry. These settings are
9895 # NOT set up by the initialization strings.
9897 # Port Configuration
9902 # Terminal Configuration
9908 # Note: the 2624 DOES have a true <home>, believe it or not!
9910 # The 2624 has an "error line" to which messages can be sent.
9911 # This is CLOSE to what is expected for a "status line". However,
9912 # after a message is sent to the "error line", the next carriage
9913 # return is EATEN and the "error line" is turned back off again!
9914 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
9916 # This entry supports emacs (and any other program that uses raw
9917 # mode) at 4800 baud and less. I couldn't get the padding right
9920 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
9921 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
9924 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
9926 # This hp2626 entry does not use any of the fancy windowing stuff
9929 # Indeed, terminfo does not yet handle such stuff. Since changing
9930 # any window clears memory, it is probably not possible to use
9931 # this for screen opt.
9933 # ed is incredibly slow most of the time - I am guessing at the
9934 # exact padding. Since the terminal uses xoff/xon this is intended
9935 # only for cost computation, so that the terminal will prefer el
9936 # or even dl1 which is probably faster!
9938 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
9939 # extra slow on the last line of the window.
9941 # The padding probably should be changed.
9943 hp2626|hp2626a|hp2626p|HP 2626,
9946 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
9947 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
9948 use=hp+labels, use=scrhp,
9950 # This entry is for sysline. It allocates a 23 line window with
9951 # a 115 line workspace for regular use, and a 1 line window for
9954 # This assumes port 2 is being used.
9955 # Turn off horizontal line, Create ws #1 with 115 lines,
9956 # Create ws #2 with 1 line, Create window #1 lines 1-23,
9957 # Create window #2 lines 24-24, Attach cursor to workspace #1.
9958 # Note that this clears the tabs so it must be done by tset before
9961 hp2626-s|HP 2626 using only 23 lines,
9964 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
9965 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
9966 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
9967 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
9968 # Force terminal back to 24 lines after being 23.
9969 hp2626-ns|HP 2626 using all 24 lines,
9970 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
9971 \s\E&w3f2I\s\E&w7f2p1I\s\r,
9973 # Various entries useful for small windows on 2626.
9974 hp2626-12|Hewlett-Packard 2626 12 lines,
9975 lines#12, use=hp2626,
9976 hp2626-12x40|Hewlett-Packard 2626 12 lines 40 columns,
9977 cols#40, lines#12, use=hp2626,
9978 hp2626-x40|Hewlett-Packard 2626 40 columns,
9979 cols#40, use=hp2626,
9980 hp2626-12-s|Hewlett-Packard 2626 11 lines plus status,
9981 lines#11, use=hp2626-s,
9984 # hp2627 color tubes from University of Wisconsin
9986 hp2627a-rev|HP 2627 with reverse video colors,
9988 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
9990 kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
9991 smul=\E&dD\E&v1S, use=hp2621-nl,
9992 hp2627a|HP 2627 color terminal with no labels,
9994 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
9995 kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
9996 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
9998 hp2627c|HP 2627 color (cyan) terminal with no labels,
9999 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
10002 # hp2640a doesn't have the Y cursor addressing feature, and C is
10003 # memory relative instead of screen relative, as we need.
10006 cup@, rmkx@, smkx@, use=hp2645,
10008 hp2640b|hp2644a|HP 264x series,
10009 rmkx@, smkx@, use=hp2645,
10011 # (hp2641a: removed unknown :gu: -- esr)
10012 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
10013 am, da, db, mir, xhp,
10015 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10016 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
10017 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
10018 if=/usr/share/tabset/std, il1=\EL, ind=\n,
10019 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
10020 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
10023 # This terminal should be used at 4800 baud or less. It needs padding for
10024 # plain characters at 9600, I guessed at an appropriate cr delay. It really
10025 # wants ^E/^F handshaking, but that doesn't work well even if you write
10026 # software to support it.
10027 hp2645|hp45|HP 2645 series,
10029 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kdch1=\EP,
10030 kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ,
10031 kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER,
10032 rev=\E&dB, rmkx=\E&s0A,
10033 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
10034 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
10035 sgr0=\E&d@, smkx=\E&s1A, use=hpgeneric, use=vt52+arrows,
10036 # You should use this terminal at 4800 baud or less.
10037 hp2648|hp2648a|HP 2648a graphics terminal,
10038 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
10039 dch1=\EP$<7>, ip=$<5>, use=hp2645,
10041 # The HP 150 terminal is a fairly vanilla HP terminal, with the
10042 # clreol standout problem. It also has graphics capabilities and
10043 # a touch screen, which we don't describe here.
10044 hp150|Hewlett Packard Model 150,
10047 # HP 2382a terminals, "the little ones." They don't have any
10048 # alternate character set support and sending out ^N/^O will
10049 # leave the screen blank.
10050 hp2382a|hp2382|Hewlett Packard 2382a,
10054 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
10057 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
10058 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
10059 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
10061 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
10063 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
10064 use=hp+pfk+arrows, use=hp2621-fl,
10066 # newer hewlett packard terminals
10068 newhpkeyboard|generic entry for HP extended keyboard,
10069 kbs=^H, kcbt=\Ei, kclr=\EJ, kdch1=\EP, kdl1=\EM, ked=\EJ,
10070 kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF,
10071 knp=\EU, kpp=\EV, kri=\ES, krmir=\ER, rmkx=\E&s0A,
10072 smkx=\E&s1A, use=hp+pfk-cr, use=vt52+arrows,
10074 newhp|generic entry for new Hewlett Packard terminals,
10075 am, bw, mir, xhp, xon,
10076 cols#80, lines#24, pb#4800,
10077 acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn
10079 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
10080 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
10081 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
10082 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
10083 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
10084 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
10085 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
10086 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
10087 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
10088 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
10089 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
10090 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
10091 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
10092 tbc=\E3, use=newhpkeyboard,
10094 memhp|memory relative addressing for new HP ttys,
10096 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
10097 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
10098 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
10099 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
10101 scrhp|screen relative addressing for new HP ttys,
10102 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
10103 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
10104 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
10105 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
10106 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
10108 # (hp+labels: added label values from a BRL termcap -- esr)
10109 hp+labels|"standard" label info for new HP ttys,
10110 lh#2, lw#8, nlab#8,
10111 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
10112 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
10114 rmln=\E&j@, smln=\E&jB,
10116 hp+printer|"standard" printer info for HP ttys,
10117 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
10120 # The new hp2621b is kind of a cross between the old 2621 and the
10121 # new 262x series of machines. It has dip-switched options.
10122 # The firmware has a bug in it such that if you give it a null
10123 # length label, the following character is eaten!
10124 hp2621b|HP 2621b with old style keyboard,
10125 lh#1, lm#48, lw#8, nlab#8,
10126 khome=\Eh, kind=\ET, kll=\EF, kri=\ES,
10127 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
10128 %;%p2%s\E%{111}%p1%+%c\r,
10129 smln=\E&jB, use=hp2621, use=vt52+arrows,
10131 hp2621b-p|HP 2621b with printer,
10132 use=hp+printer, use=hp2621b,
10134 # hp2621b - new 2621b with new extended keyboard
10135 # these are closer to the new 26xx series than the other 2621b
10136 hp2621b-kx|HP 2621b with extended keyboard,
10137 use=newhpkeyboard, use=hp2621b,
10139 hp2621b-kx-p|HP 2621b with new keyboard & printer,
10140 use=hp+printer, use=hp2621b-kx,
10142 # Some assumptions are made in the following entries.
10143 # These settings are NOT set up by the initialization strings.
10145 # Port Configuration
10146 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
10148 # Terminal Configuration
10149 # InhHndShk(G)=Yes InhDC2(H)=Yes
10150 # XmitFnctn(A)=No InhEolWrp=No
10153 # Hp 2622a & hp2623a display and graphics terminals
10155 hp2622|hp2622a|HP 2622,
10158 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
10160 # The 2623 is a 2622 with extra graphics hardware.
10161 hp2623|hp2623a|HP 2623,
10164 hp2624b-p|hp2624b-4p-p|Hewlett Packard 2624 B with printer,
10165 use=hp+printer, use=hp2624,
10167 # The hewlett packard B can have an optional extra 6 pages of memory.
10168 hp2624-10p|hp2624a-10p|hp2624b-10p|Hewlett Packard 2624 B w/ 10 pages of memory,
10169 lm#240, use=hp2624,
10171 hp2624b-10p-p|Hewlett Packard 2624 B w/ extra memory & printer,
10172 lm#240, use=hp2624b-p,
10174 # Color manipulations for HP terminals
10175 hp+color|HP with colors,
10177 colors#16, ncv#17, pairs#7,
10178 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10179 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10180 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10181 %t1%e.%p7%d%;z%p1%dI,
10182 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10183 I\E&v1b1c6I\E&v1x1y7I,
10184 op=\E&v0S, scp=\E&v%p1%dS,
10186 # <is2> sets the screen to be 80 columns wide
10187 hp2397a|hp2397|Hewlett Packard 2397A color terminal,
10188 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
10190 # HP 700/44 Setup parameters:
10191 # Terminal Mode HP-PCterm
10192 # Inhibit Auto Wrap NO
10193 # Status Line Host Writable
10194 # PC Character Set YES
10195 # Twenty-Five Line Mode YES
10196 # XON/XOFF @128 or 64 (sc)
10197 # Keycode Mode NO or YES (sc)
10198 # Backspace Key BS or BS/DEL
10200 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
10201 # \E\\? does not turn off keycode mode
10202 # <smsc> sets alternate start/stop; keycode on
10203 hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode,
10206 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
10208 bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r,
10209 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, ed=\E[J,
10210 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\n,
10211 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
10212 kcbt=\E[Z, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, kf2=\E[18~,
10213 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~,
10214 kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, kpp=\E[5~,
10215 rmam=\E[?7l, rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\,
10216 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
10217 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
10218 smul=\E[4m, xoffc=g, xonc=e, use=ansi+arrows,
10219 use=ansi+local1, use=vt220+cvis,
10221 # (hp2392: copied <rmir> here from hpex -- esr)
10222 hp2392|239x series,
10224 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, khome=\Eh, kind=\EU,
10225 knp=\Eu, kpp=\Ev, kri=\EV, rmir=\ER, rmul=\E&d@, smir=\EQ,
10226 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, use=hp+pfk+cr,
10228 hpsub|HP terminals -- capability subset,
10229 am, da, db, mir, xhp, xon,
10231 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10232 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
10233 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
10234 is2=\E&s1A\E<\E&k0\\, kbs=^H, khome=\Eh, rmkx=\E&s0A,
10235 rmso=\E&d@, sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
10239 # May be used for most 24 x 80 hp terminals,
10240 # but has no padding added, so may allow runover in some terminals at high
10241 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
10242 # hp98x5 terminal emulators or hp98x6 consoles.
10243 # Adds xy-cursor addressing, vertical cursor addressing, home,
10244 # last line, and underline capabilities.
10246 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
10247 # moved <rmir> here from hpsub -- esr)
10248 hpex|HP extended capabilities,
10249 cud1=\n, cup=\E&a%p1%dy%p2%dC, kcub1=^H, kcud1=\n,
10250 nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD,
10251 vpa=\E&a%p1%dY, use=hpsub,
10253 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
10254 hp2|hpex2|Hewlett-Packard extended capabilities newer version,
10255 am, da, db, mir, xhp,
10256 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
10257 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10258 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10259 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10260 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10261 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10262 knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10263 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10264 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10265 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10266 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
10267 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
10268 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
10269 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
10270 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
10271 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
10272 use=hp+pfk-cr, use=hp+arrows,
10275 # From: <ddavis@ic.berkeley.edu>
10276 hp236|hp236 internal terminal emulator,
10279 clear=\EF, cnorm=\EDE, cub1=^H,
10280 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
10281 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
10282 sgr0=\ECI, smso=\EBI,
10284 # This works on a hp300 console running Utah 4.3 BSD
10285 # From: Craig Leres <leres@okeeffe.berkeley.edu>
10286 hp300h|HP Catseye console,
10287 OTbs, am, da, db, mir, xhp,
10288 cols#128, lines#51, lm#0, xmc#0,
10289 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10290 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10291 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10292 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
10293 khome=\Eh, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
10294 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
10295 tbc=\E3, vpa=\E&a%p1%dY, use=vt52+arrows,
10296 # From: Greg Couch <gregc@ernie.berkeley.edu>
10297 hp9837|hp98720|hp98721|HP 9000/300 workstations,
10298 OTbs, am, da, db, mir, xhp,
10299 cols#128, it#8, lines#46, lm#0,
10300 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
10301 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10302 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10303 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kdch1=\EP,
10304 kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL,
10305 knp=\EU, kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S,
10306 rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S,
10307 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=vt52+arrows,
10308 # HP 9845 desktop computer from BRL
10309 # (hp9845: removed unknown capability :gu: -- esr)
10311 OTbs, am, da, db, eo, mir, xhp,
10313 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
10314 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
10315 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
10316 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
10317 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
10318 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
10319 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
10320 hp98550|hp98550a|HP 9000 Series 300 color console,
10321 OTbs, am, da, db, mir, xhp,
10322 cols#128, lines#49, lm#0,
10323 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
10324 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10325 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
10326 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, hts=\E1,
10327 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
10328 kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10329 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10330 kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER,
10331 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N,
10332 smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10333 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=ansi+inittabs,
10336 # From: Martin Trusler
10337 hp98550-color|hp98550a-color|HP 9000 Series 300 color console (Trusler),
10338 OTbs, am, ccc, da, db, km, mir, xhp,
10339 colors#8, cols#128, lh#2, lines#49, lm#0, lw#8, nlab#8, pairs#8,
10341 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
10342 u+v+w+x|y<z>{*|!}\273~\362,
10343 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
10344 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10345 dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\E&a0y0C,
10346 hpa=\E&a%p1%dC, hts=\E1, il1=\EL, ind=\ES,
10347 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10348 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10349 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10350 %t1%e.%p7%d%;z%p1%dI,
10351 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10352 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10353 kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10354 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10355 I\E&v1b1c6I\E&v1x1y7I,
10356 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10357 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10358 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10359 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
10360 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
10361 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
10363 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%{64}%+%c%?%p9%t%'
10364 \016'%c%e%'\017'%c%;,
10365 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
10366 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
10367 smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea,
10368 u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY,
10369 use=hp+pfk-cr, use=ansi+inittabs, use=hp+arrows,
10371 # From: Victor Duchovni <vic@fine.princeton.edu>
10372 # (hp700-wy: removed obsolete ":nl=^J:";
10373 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
10374 hp700-wy|HP 700/41 emulating Wyse30,
10375 OTbs, am, bw, mir, msgr,
10376 cols#80, it#8, lines#24, xmc#1,
10377 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10378 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10379 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
10380 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
10381 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
10382 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
10383 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
10384 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
10385 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
10386 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
10387 hp70092|hp70092a|hp70092A|HP 700/92,
10389 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
10390 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
10391 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
10392 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10393 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10394 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10395 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10396 kll=\EF, knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dB,
10397 ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@,
10398 rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ,
10399 smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10400 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
10402 bobcat|sbobcat|HP 9000 model 300 console,
10403 am, da, db, mir, xhp,
10404 cols#128, it#8, lines#47, xmc#0,
10405 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10406 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
10407 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
10408 il1=\EL$<10*/>, ind=\n, kbs=^H, khome=\Eh, nel=\r\n,
10409 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
10410 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
10411 vpa=\E&a%p1%dY$<6/>, use=vt52+arrows,
10412 gator-t|HP 9000 model 237 emulating extra-tall AAA,
10413 lines#94, use=gator,
10414 gator|HP 9000 model 237 emulating AAA,
10416 cols#128, it#8, lines#47,
10417 bel=^G, cbt=\E[Z, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
10418 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch=\E[%p1%dP$<4/>,
10419 dch1=\E[P, dl=\E[%p1%dM$<1*/>, dl1=\E[M, home=\E[H,
10420 hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@,
10421 il=\E[%p1%dL$<1*/>, il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n,
10422 nel=\r\n, rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
10423 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10426 gator-52|HP 9000 model 237 emulating VT52,
10427 cols#128, lines#47, use=vt52-basic,
10428 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
10429 lines#94, use=gator-52,
10431 #### Honeywell-Bull
10433 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
10436 # Honeywell Bull terminal. Its cursor and function keys send single
10437 # control characters and it has standout/underline glitch. Most programs
10438 # do not like these features/bugs. Visual bell is realized by flashing the
10439 # "keyboard locked" LED.
10440 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
10442 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
10443 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
10444 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
10445 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
10446 dku7003|Honeywell Bull DKU 7003 all features described,
10449 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
10450 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10453 #### Lear-Siegler (LSI adm)
10455 # These guys are long since out of the terminals business, but
10456 # in 1995 many current terminals still have an adm type as one of their
10457 # emulations (usually their stupidest, and usually labeled adm3, though
10458 # these `adm3' emulations normally have adm3a+ capabilities).
10460 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
10461 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
10462 # was being held to ground would trigger a send of the top line on the screen.
10463 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
10464 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
10465 # for clearing up this point.)
10467 adm1a|adm1|LSI adm1a,
10470 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10471 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
10476 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10477 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10478 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
10479 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10480 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
10484 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
10485 # The following ADM-3A switch settings are assumed for normal operation:
10486 # SPACE U/L_DISP CLR_SCRN 24_LINE
10487 # CUR_CTL LC_EN AUTO_NL FDX
10488 # Other switches may be set for operator convenience or communication
10489 # requirements. I recommend
10490 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
10492 # Most of these terminals required an option ROM to support lower case display.
10493 # Open the case and look at the motherboard; if you see an open 24-pin DIP
10494 # socket, you may be out of luck.
10496 # (adm3a: some capabilities merged in from BRl entry -- esr)
10500 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
10501 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10502 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
10506 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
10509 ed=\EY, el=\ET, khome=^^, rmso=\EG, smso=\EG, use=adm3a+,
10510 # A lot of terminals other than adm11s use these. Wherever you see
10511 # use=adm+sgr with some of its capabilities disabled, try the
10512 # disabled ones. They may well work but not have been documented or
10513 # expressed in the using entry. We'd like to cook up an <sgr> but the
10514 # <rmacs>/<smacs> sequences of the using entries vary too much.
10515 adm+sgr|adm style highlight capabilities,
10516 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
10517 smso=\EG4, smul=\EG8,
10518 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
10519 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
10520 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
10521 # be ^Z, according to his entry.
10522 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
10523 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
10526 OTkn#8, cols#80, lines#24,
10527 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
10528 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10529 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
10530 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10531 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10532 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
10534 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
10535 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
10536 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
10537 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
10538 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
10539 # via BRL. That entry asserted <xmc#1>, but I've left that out because
10540 # neither earlier nor later ADMSs have it -- esr)
10542 # You will need to get into the supervisor setup before you can set
10543 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
10544 # see a lot more setup options.
10546 # While in supervisor setup you can also use following codes:
10548 # Ctrl-P Personality character selections (configure for example what
10549 # arrow keys send, if I recall correctly)
10550 # Ctrl-T tabs 1-80 use left&right to move and up to set and
10551 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
10552 # Ctrl-B Binary setup (probably not needed. I think that everything can
10553 # be set using normal setup)
10554 # Ctrl-A Answerback mode (enter answerback message)
10555 # Ctrl-U User friendly mode (normal setup)
10556 # Ctrl-D Defaults entire setup and function keys from EPROM tables
10557 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
10558 # Ctrl-R Reads both setup and functions keys from NVM.
10559 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
10561 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
10562 # RTS/CTS used nowadays with virtually every modem and computer. 19200
10563 # bps works fine with hardware flow control.
10565 # The following null-modem cable should fix this and enable you to use
10566 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
10567 # set ADM-12+ for DTR handshaking from supervisor setup.
10569 # PC Serial ADM-12+
10580 OTbs, OTpt, am, mir,
10581 OTug#1, cols#80, it#8, lines#24,
10582 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10583 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10584 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
10585 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
10586 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
10587 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
10588 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10589 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10590 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
10592 # (adm20: removed obsolete ":kn#7:" -- esr)
10593 adm20|Lear Siegler adm20,
10595 cols#80, it#8, lines#24,
10596 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
10597 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
10598 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
10599 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
10600 sgr0=\E(, smso=\E),
10601 adm21|Lear Siegler adm21,
10603 dch1=\EW, dl1=\ER$<30*>, ed=\EY, el=\ET, ich1=\EQ,
10604 il1=\EE$<30*>, invis@, kbs=^H, khome=^^, use=adm+sgr,
10606 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
10607 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
10608 # removed bogus-looking \200 from before <cup>. -- esr)
10612 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10614 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
10615 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
10617 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10618 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10619 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10620 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
10621 # ADM 31 DIP Switches
10623 # This information comes from two versions of the manual for the
10624 # Lear-Siegler ADM 31.
10628 # +-||||-------------------------------------+
10643 # +----------------------------------------------+
10644 # front of case (keyboard)
10646 # S1 - Data Rate - Modem
10647 # S2 - Data Rate - Printer
10648 # ------------------------
10649 # Data Rate Setting
10650 # -------------------
10668 # S3 - Interface/Printer/Attributes
10669 # ---------------------------------
10670 # Printer Busy Control
10673 # off off off Busy not active, CD disabled
10674 # off off on Busy not active, CD enabled
10675 # off on off Busy active on J5-20, CD disabled
10676 # on off off Busy active on J5-19, CD disabled - Factory Set.
10677 # on off on Busy active on J5-19, CD enabled
10679 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
10681 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
10683 # sw6 ON enables printer BUSY active LOW - Factory Setting
10684 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
10686 # sw7 ON - steady cursor - Factory Setting
10687 # OFF - blinking cursor
10689 # sw8 ON causes selected attribute character to be displayed
10690 # OFF causes SPACE to be displayed instead - Factory Setting
10696 # sw4 sw1 sw2 sw3 sw4
10697 # ---------------------------
10698 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
10699 # Current Loop disabled - Factory Setting
10700 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
10702 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
10703 # Current Loop Disabled
10705 # sw5 ON disables dot stretching mode - Factory Setting
10706 # OFF enables dot stretching mode
10707 # sw6 ON enables blanking function
10708 # OFF enables underline function - Factory Setting
10709 # sw7 ON causes NULLS to be displayed as NULLS
10710 # OFF causes NULLS to be displayed as SPACES - Factory Setting
10712 # S5 - Word Structure
10713 # -------------------
10714 # sw1 ON enables BREAK key - Factory Setting
10715 # OFF disables BREAK key
10716 # sw2 ON selects 50Hz monitor refresh rate
10717 # OFF selects 60Hz monitor refresh rate - Factory Setting
10719 # Modem Port Selection
10722 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
10723 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
10724 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
10725 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
10726 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
10727 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
10728 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
10729 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
10731 # sw6 ON sends bit 8 a 1 (mark)
10732 # OFF sends bit 8 as 0 (space) - Factory Setting
10733 # sw7 ON selects Block Mode
10734 # OFF selects Conversation Mode - Factory Setting
10735 # sw8 ON selects Full Duplex operation
10736 # OFF selects Half Duplex operation - Factory Setting
10740 # sw1, sw2, sw6, sw7 Reserved - Factory 0
10742 # Printer Port Selection
10743 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
10745 # sw8 ON enables Printer Port
10746 # OFF disables Printer Port - Factory Setting
10748 # S7 - Polling Address
10749 # --------------------
10750 # sw1-7 Establish ASCII character which designates terminal polling address
10752 # OFF = logic 1 - Factory Setting
10753 # sw8 ON enables Polling Option
10754 # OFF disables Polling Option - Factory Setting
10757 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
10759 # This adm31 entry uses underline as the standout mode.
10760 # If the adm31 gives you trouble with standout mode, check the DIP switch in
10761 # position 6, bank @c11, 25% from back end of the circuit board. Should be
10762 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
10763 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
10764 adm31|LSI adm31 with sw6 set for underline mode,
10767 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10768 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10769 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
10770 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10771 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10772 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
10773 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
10774 adm31-old|o31|old adm31,
10775 rmul@, smso=\EG4, smul@, use=adm31,
10776 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
10780 if=/usr/share/tabset/vt100,
10781 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
10782 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
10786 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10787 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10788 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
10789 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
10790 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
10791 smir=\Eq, smul@, use=adm+sgr,
10792 # The following termcap for the Lear Siegler ADM-42 leaves the
10793 # "system line" at the bottom of the screen blank (for those who
10794 # find it distracting otherwise)
10795 adm42-ns|LSI adm-42 with no system line,
10796 cbt=\EI\EF \011, clear=\E;\EF \011,
10797 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
10798 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
10799 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
10800 smir=\Eq\EF \011, use=adm42,
10801 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
10802 # The insert mode of this terminal is commented out because it's broken for our
10803 # purposes in that it will shift the position of every character on the page,
10804 # not just the cursor line!
10805 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
10806 adm1178|1178|LSI adm1178,
10808 cols#80, lines#24, xmc#1,
10809 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
10810 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10811 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
10812 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
10813 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
10814 sgr0=\E), smso=\EG4, smul=\EG1,
10818 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
10819 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
10820 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
10822 # ComputerVision Services
10823 # 500 Old Connecticut Path
10824 # Framingham, Mass.
10827 # Standout mode is dim reverse-video.
10828 pt100|pt200|wren|fenix|Prime pt100/pt200,
10830 cols#80, it#8, lines#24,
10831 cbt=\E[Z, clear=\E?, cr=\r, cub1=^H, cud1=\ED,
10832 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu1=\EM,
10833 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J\E[r,
10834 el=\E[K\E[t, flash=\E$$<200/>\E$P, home=\E$B, ht=^I,
10835 il1=\E[L\E[t, ind=\n, khome=\E$A, nel=\r\n, rmcup=,
10836 rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
10837 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
10839 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
10840 use=ansi+arrows, use=ansi+local,
10842 pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode,
10844 cup=\E[%i%p1%d;%p2%dH, use=pt100,
10846 rmso@, smso@, use=pt100,
10847 pt250w|Prime PT250 in 132-column mode,
10848 rmso@, smso@, use=pt100w,
10853 # 3475-A North 1st Street
10854 # San Jose CA 95134
10855 # Vox: (800)-457-4447
10856 # Fax: (408)-473-1510
10857 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
10859 # Qume was bought by Wyse, but still (as of early 1995) has its own support
10860 # group and production division.
10862 # Discontinued Qume models:
10864 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
10865 # built to replace them, and a qvt119+ which was a 101+ with available wide
10866 # mode (132 columns). There was a qvt103 which added VT100/VT131 emulations
10867 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
10868 # ANSI-compatible terminals with the qvt323 and qvt61.
10870 # Current Qume models (as of February 1995):
10872 # All current Qume terminals have ANSI-compatible operation modes.
10873 # Qume is still producing the qvt62, which features emulations for other
10874 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
10875 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
10876 # with many emulations including Wyse370, Wyse 325, etc. Their newest
10877 # model is the qvt520, which is VT420-compatible.
10879 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
10881 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
10882 # setup mode. Shift-s should be a configuration save to NVRAM.
10884 qvt101|qvt108|Qume qvt 101 and QVT 108,
10885 xmc#1, use=qvt101+,
10887 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
10888 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
10889 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
10890 # What seems to be going on here is that this entry was designed so that
10891 # the normal highlight is bold and standout is dim plus something else
10892 # (reverse-video maybe? But then, are there two <rev> sequences?)
10894 # Added kdch1, kil1, kdl1 based on screenshot -TD:
10895 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
10896 qvt101+|qvt101p|Qume qvt 101 PLUS product,
10898 cols#80, lines#24, xmc#0,
10899 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
10900 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10901 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10902 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10903 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
10904 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10905 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
10906 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10907 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
10908 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10909 qvt102|Qume qvt 102,
10910 cnorm=\E., use=qvt101,
10911 # (qvt103: added <rmam>/<smam> based on init string -- esr)
10912 qvt103|Qume qvt 103,
10914 cols#80, it#8, lines#24, vt#3,
10915 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10916 clear=\E[H\E[2J$<50>, cr=\r, cub1=^H, cud1=\n,
10917 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
10918 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
10919 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10920 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10921 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
10922 rmso=\E[m$<2>, rmul=\E[m$<2>,
10923 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10924 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
10926 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
10927 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ansi+csr,
10930 qvt103-w|Qume qvt103 132 cols,
10931 cols#132, lines#24,
10932 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
10933 qvt119+|qvt119p|qvt119|Qume qvt 119 and 119PLUS terminals,
10935 cols#80, lines#24, xmc#0,
10936 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
10937 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10938 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
10939 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
10940 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
10941 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
10942 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10943 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10944 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
10945 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10946 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
10947 lines#25, use=qvt119+,
10948 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
10950 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
10951 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
10952 lines#25, use=qvt119+,
10953 qvt203|qvt203+|Qume qvt 203 Plus,
10954 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
10955 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
10956 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
10957 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
10958 qvt203-w|qvt203-w-am|Qume qvt 203 PLUS in 132 cols (w/advanced video),
10959 cols#132, lines#24,
10960 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
10962 # Since a command is present for enabling 25 data lines,
10963 # a specific terminfo entry may be generated for the 203.
10964 # If one is desired for the QVT 119 PLUS then 25 lines must
10965 # be selected in the status line (setup line 9).
10967 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
10969 is2=\E[=40h\E[?3l, use=qvt203,
10970 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
10971 cols#132, lines#25,
10972 rs2=\E[?3h\E[=40h, use=qvt203,
10974 #### TeleVideo (tvi)
10977 # 550 East Brokaw Road
10978 # PO Box 49048 95161
10979 # San Jose CA 95112
10980 # Vox: (408)-954-8333
10981 # Fax: (408)-954-0623
10984 # These require incredible amounts of padding.
10986 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
10987 # TeleVideo terminals are ANSI and PC-ANSI compatible.
10989 tvi803|TeleVideo 803,
10990 clear=\E*$<10>, use=tvi950,
10992 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
10993 # Switch settings are:
11014 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
11030 # U do CR/LF when CR received
11031 # D do CR when CR received
11053 # S2 6 Cursor down key
11057 # S2 7 Screen colour
11061 # S2 8 DSR status (pin 6)
11065 # S2 9 DCD status (pin 8)
11069 # S2 10 DTR status (pin 20)
11072 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
11073 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
11074 tvi910|TeleVideo model 910,
11076 cols#80, it#8, lines#24, xmc#1,
11077 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11078 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
11079 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
11080 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
11081 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
11082 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11083 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11084 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
11085 # From: Alan R. Rogers <rogers%albany@csnet-relay>
11086 # as subsequently hacked over by someone at SCO
11087 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
11089 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
11092 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
11093 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
11094 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
11095 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
11098 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
11099 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
11100 # D U D D 8O1 D U U U 8E2
11102 # S1 9 Autowrap (U = on, D = off)
11103 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
11104 # S2 1 Mode (U = block, D = conversational)
11105 # S2 2 Duplex (U = half, D = full)
11106 # S2 3 Hertz (U = 50, D = 60)
11107 # S2 4 Edit mode (U = local, D = duplex)
11108 # S2 5 Cursor type (U = underline, D = block)
11109 # S2 6 Cursor down key (U = send ^J, D = send ^V)
11110 # S2 7 Screen colour (U = green on black, D = black on green)
11111 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
11112 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
11113 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
11115 tvi910+|TeleVideo 910+,
11116 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
11117 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
11118 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
11119 ll=\E=7\s, use=tvi910,
11121 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
11122 # <khome> from BRL entry -- esr)
11123 tvi912|tvi914|tvi920|TeleVideo 912/914/920 (old),
11124 OTbs, OTpt, am, msgr,
11125 cols#80, it#8, lines#24, xmc#1,
11126 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11127 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11128 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
11129 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
11130 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11131 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11132 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11133 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
11135 # We got some new tvi912c terminals that act really weird on the regular
11136 # termcap, so one of our gurus worked this up. Seems that cursor
11137 # addressing is broken.
11138 tvi912cc|tvi912 at Cowell College,
11141 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
11142 # From: Benjamin C. W. Sittler
11144 # Someone has put a scanned copy of the manual online at:
11145 # http://vt100.net/televideo/912b-om/
11146 # (https://vt100.net/manx/details/6,5484)
11148 # These terminals were produced ca. 1979, and had a 12" monochrome
11149 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
11150 # ASCII, and were generally similar to adm3a but with attributes
11151 # (including some with magic cookies), fancy half-duplex mode, and
11154 # Some operations require truly incredible amounts of padding. The
11155 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
11156 # are so slow as to be nearly unusable.
11158 # There may or may not have been a separate, earlier series of 912/920
11159 # terminals (without the "B" and "C" suffix); I have never seen one,
11160 # and the manual only describes the "B" and "C" series. The 912 and 920
11161 # are quite distinct from the 914 and 924, which were much nicer non-
11162 # magic-cookie terminals similar to the 950.
11164 # This is a new description for the following TeleVideo terminals,
11165 # distinguished chiefly by their keyboards:
11167 # TVI-912B - very odd layout, no function keys (84 keys)
11168 # TVI-920B - typewriter layout, no function keys (103 keys)
11169 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
11170 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
11172 # To choose a setting for the TERM variable, start with the model:
11174 # Model || base name
11175 # ----------||-----------
11176 # TVI-912B || tvi912b
11177 # TVI-912C || tvi912c
11178 # TVI-920B || tvi920b
11179 # TVI-920C || tvi920c
11181 # Then add a suffix from the following table describing installed options
11182 # and how you'd like to use the terminal:
11184 # Use Video | Second | Visual | Magic | Page || feature
11185 # Attributes | Page | Bell | Cookies | Print || suffix
11186 # ------------|--------|--------|---------|-------||---------
11187 # No | No | N/A | N/A | No || -unk
11188 # No | No | N/A | N/A | Yes || -p
11189 # No | Yes | No | N/A | No || -2p-unk
11190 # No | Yes | No | N/A | Yes || -2p-p
11191 # No | Yes | Yes | N/A | No || -vb-unk
11192 # No | Yes | Yes | N/A | Yes || -vb-p
11193 # Yes | No | N/A | No | N/A ||
11194 # Yes | No | N/A | Yes | N/A || -mc
11195 # Yes | Yes | No | No | N/A || -2p
11196 # Yes | Yes | No | Yes | N/A || -2p-mc
11197 # Yes | Yes | Yes | No | N/A || -vb
11198 # Yes | Yes | Yes | Yes | N/A || -vb-mc
11200 # So e.g. a model 920 C with second page memory option, visual bell
11201 # and no magic cookies would be tvi920c-vb; a model 912 B without the
11202 # second page memory option and using magic cookies would be
11207 # At 9600 baud, the terminal is prone to overflow its input buffer
11208 # during complex operations (insert/delete
11209 # character/line/screen/page), and it does not signal this over the
11210 # RS232 cable. The typical symptom of an overrun is that the terminal
11211 # starts beeping, and output becomes garbled.
11213 # The padding delays in this terminfo were derived using tack(1)
11214 # running on a Linux box connected to a TVI-920C with a later-model
11215 # (A49C1-style) ROM running at 9600 baud, so your mileage may
11216 # vary. The numbers below seem to give the terminal enough time so
11217 # that it doesn't overflow its input buffer and start losing
11222 # If you want to use the FUNCT key on a tvi912[bc], use the
11223 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
11224 # the following table (these also work on the 920 series):
11226 # Unshifted Function Keys:
11228 # Key | capname|| Equivalent
11229 # -----|--------||------------
11230 # F1 | <kf1> || FUNCT + @
11231 # F2 | <kf2> || FUNCT + A
11232 # F3 | <kf3> || FUNCT + B
11233 # F4 | <kf4> || FUNCT + C
11234 # F5 | <kf5> || FUNCT + D
11235 # F6 | <kf6> || FUNCT + E
11236 # F7 | <kf7> || FUNCT + F
11237 # F8 | <kf8> || FUNCT + G
11238 # F9 | <kf9> || FUNCT + H
11239 # F10 | <kf10> || FUNCT + I
11240 # F11 | <kf11> || FUNCT + J
11242 # Shifted Function Keys:
11244 # SHIFT + Key | capname|| Equivalent
11245 # -------------|--------||------------
11246 # SHIFT + F1 | <kf12> || FUNCT + `
11247 # SHIFT + F2 | <kf13> || FUNCT + a
11248 # SHIFT + F3 | <kf14> || FUNCT + b
11249 # SHIFT + F4 | <kf15> || FUNCT + c
11250 # SHIFT + F5 | <kf16> || FUNCT + d
11251 # SHIFT + F6 | <kf17> || FUNCT + e
11252 # SHIFT + F7 | <kf18> || FUNCT + f
11253 # SHIFT + F8 | <kf19> || FUNCT + g
11254 # SHIFT + F9 | <kf20> || FUNCT + h
11255 # SHIFT + F10 | <kf21> || FUNCT + i
11256 # SHIFT + F11 | <kf22> || FUNCT + j
11258 # PORTS AND SWITCH SETTINGS
11260 # Here are the switch settings for the TVI-912B/TVI-920B and
11261 # TVI-912C/TVI-920C:
11263 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
11264 # 2: 9600 3: 4800 4: 2400 5: 1200
11265 # 6: 600 7: 300 8: 150 9: 75
11268 # S2 UART/Terminal options:
11270 # 1: Not used Not allowed
11271 # 2: Alternate character set Standard character set
11272 # 3: Full duplex Half duplex
11273 # 4: 50 Hz refresh 60 Hz refresh
11274 # 5: No parity Send parity
11275 # 6: 2 stop bits 1 stop bit
11276 # 7: 8 data bits 7 data bits
11277 # 8: Not used Not allowed on Rev E or lower
11278 # 9: Even parity Odd parity
11279 # 10: Steady cursor Blinking cursor
11280 # (On Rev E or lower, use W25 instead of switch 10.)
11282 # S5 UART/Terminal options:
11284 # 1: P3-6 Not connected DSR received on P3-6
11285 # 2: P3-8 Not connected DCD received on P3-8
11287 # 3 Open, 4 Open: P3-20 Not connected
11288 # 3 Open, 4 Closed: DTR on when terminal is on
11289 # 3 Closed, 4 Open: DTR is connected to RTS
11290 # 3 Closed, 4 Closed: Not allowed
11292 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
11293 # all data transmitted out of the modem port (P3) will also be
11294 # transmitted out of the printer port (P4).
11296 # 6 Open, 7 Open: Not allowed
11297 # 6 Open, 7 Closed: 20ma current loop input
11298 # 6 Closed, 7 Open: RS232 input
11299 # 6 Closed, 7 Closed: Not allowed
11302 # If the jumper is installed, the effect will occur (the next time the terminal
11305 # S4/W31: Enables automatic LF upon receipt of CR from
11306 # remote or keyboard.
11307 # S4/W32: Enables transmission of EOT at the end of Send. If not
11308 # installed, a carriage return is sent.
11309 # S4/W33: Disables automatic carriage return in column 80.
11310 # S4/W34: Selects Page Print Mode as initial condition. If not
11311 # installed, Extension Mode is selected.
11313 # NON-STANDARD CAPABILITIES
11315 # Sending <u9> or <u7> returns a cursor position report in the format
11316 # YX\r, where Y and X are as in <cup>. This format is described in
11317 # <u8> and <u6>, but it's not clear how one should write an
11318 # appropriate scanf string, since we need to subtract %' ' from the
11319 # character after reading it. The <u9> capability is used by tack(1)
11320 # to synchronize during padding tests, and seems to work for that
11323 # This description also includes the obsolete termcap capabilities
11324 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
11326 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
11328 # The FUNCT modifier actually works with every normal key by sending
11329 # ^AX\r, where X is the sequence normally sent by that key. This is a
11330 # sort of meta key not currently describable in terminfo.
11332 # There are quite a few other keys (especially on the 920 models,) but
11333 # they are for the most part only useful in block mode.
11335 # These terminals have lots of forms manipulation features, mainly
11336 # useful in block mode, including "clear X to nulls" (vs. "clear X to
11337 # spaces"; nulls are sentinels for "send X" operations); "send X"
11338 # operations for uploading all or part of the screen; and block-mode
11339 # editing keys (they don't send escape sequences, but manipulate video
11340 # memory directly). Block mode is used for local editing, and protect
11341 # mode (in conjunction with the "write protect" attribute,
11342 # a.k.a. half-intensity outside of protect mode) is used to control
11343 # which parts of the screen are edited/sent/printed (by <mc0>).
11345 # There are at least two major families of ROM, "early" and
11346 # A49B1/A49C1; the major difference seems to be that the latter ROMs
11347 # support a few extra escape sequences for manipulating the off-screen
11348 # memory page, and for sending whole pages back to the host (mainly
11349 # useful in block mode.) The descriptions in this file don't use any
11350 # of those sequences: set cursor position including page (\E-PYX,
11351 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
11352 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
11353 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
11354 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
11355 # are as in <cup>, and some "send page" features mainly useful for
11356 # forms manipulation.
11358 # The keyboard enable (\E") and disable (\E#) sequences are unused,
11359 # except that a terminal reset (<is2>) enables the keyboard.
11361 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
11362 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
11366 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
11367 # sequences (I infer that in some TeleVideo terminal they may invert
11368 # and uninvert the display) so the <flash> sequence given here is a
11369 # cheesy page-flip instead.
11371 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
11372 # tack(1), so it is not included in the descriptions below.
11374 # It's not clear whether auto_left_margin (<bw>) flag should be set
11375 # for these terminals; tack says yes, so it is set here, but this
11376 # differs from other descriptions I've seen.
11378 # Extension print mode (<mc5>) echoes all characters to the printer
11379 # port [in addition to displaying them] except for the page print mode
11380 # sequence (<mc4>); this is a slight violation of the terminfo
11381 # definition for <mc5> but I don't expect it to cause problems. We
11382 # reset to page print mode in <rs1> since it may have been enabled
11385 # The descriptions with plus signs (+) are building blocks.
11387 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
11388 OTbs, OTpt, am, bw,
11389 cols#80, it#8, lines#24,
11390 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11391 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
11392 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
11393 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
11394 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
11395 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
11396 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
11397 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
11398 u7=\E?, u8=%c%c\r, u9=\E?,
11400 # This isn't included in the basic capabilities because it is
11401 # typically unusable in combination with the full range of video
11402 # attributes, since the magic cookie attributes turn into ASCII
11403 # control characters, and the half-intensity ("protected") attribute
11404 # converts all affected characters to spaces.
11406 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
11409 # This uses half-intensity mode (<dim>) for standout (<smso>), and
11410 # exposes no other attributes (half-intensity is the only attribute
11411 # that does not generate a magic cookie.)
11413 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
11415 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
11418 # Full magic-cookie attribute support, with half-intensity reverse
11419 # video for standout. Note that we add a space in the <dim> sequence
11420 # to give a consistent magic-cookie count. Also note that <sgr> uses
11421 # backspacing (in the TVI-supported order) to apply all requested
11422 # attributes with only a single magic cookie.
11424 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
11426 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
11428 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
11429 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
11430 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
11432 # This uses the second page memory option to save & restore screen
11433 # contents. If your terminal is missing the option, this description
11434 # should still work, but that has not been tested.
11436 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
11437 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
11438 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
11440 # This simulates flashing by briefly toggling to the other page
11443 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
11444 bel=\EK$<100>\EK, use=tvi912b+2p,
11446 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
11448 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
11449 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
11450 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
11451 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
11452 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11453 kf8=^AG\r, kf9=^AH\r,
11455 # Combinations of the basic building blocks
11457 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
11458 use=tvi912b+2p, use=tvi912b-unk,
11460 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
11461 use=tvi912b+vb, use=tvi912b-unk,
11463 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
11464 use=tvi912b+printer, use=tvi912b-unk,
11466 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
11467 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
11469 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
11470 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
11472 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
11473 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
11475 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
11476 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
11478 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
11479 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
11481 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
11482 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
11484 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
11485 use=tvi912b+dim, use=tvi912b-unk,
11487 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
11488 use=tvi912b+mc, use=tvi912b-unk,
11490 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
11491 use=tvi920b+fn, use=tvi912b-unk,
11493 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
11494 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
11496 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
11497 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
11499 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
11500 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
11502 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
11503 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
11506 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
11507 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
11510 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
11511 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
11514 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
11515 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
11518 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
11519 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
11522 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
11523 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
11526 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
11527 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
11529 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
11530 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
11532 # TeleVideo 921 and variants
11533 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
11534 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
11535 # also added empty <acsc> to suppress tic warning -- esr)
11536 tvi921|TeleVideo model 921 with sysline same as page & real vi function,
11537 OTbs, OTpt, am, hs, xenl, xhp,
11538 cols#80, lines#24, xmc#0,
11539 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11540 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11541 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11542 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
11543 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
11544 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
11545 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
11546 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
11547 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
11548 # without the beeper
11549 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
11550 # also added empty <acsc> to suppress tic warning -- esr)
11551 tvi92B|TeleVideo model 921 with sysline same as page & real vi function & no beeper,
11553 cols#80, lines#24, xmc#0,
11554 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11555 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11556 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11557 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
11558 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11559 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
11560 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11561 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
11562 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
11563 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
11564 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
11565 dl1=\ER$<2*/>, il1=\EE$<2*/>,
11566 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
11567 kil1=\EE$<2*/>, use=tvi92B,
11569 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
11570 # in from a BSD termcap file because it looks like they do something the
11571 # old ones skip -- esr)
11572 tvi924|TeleVideo tvi924,
11573 am, bw, hs, in, mir, msgr, xenl, xon,
11574 cols#80, it#8, lines#24, wsl#80, xmc#0,
11575 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
11576 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
11577 cub1=^H, cud1=^V, cuf1=^L,
11578 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
11579 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
11580 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
11581 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11582 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
11583 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11584 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
11585 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
11586 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
11587 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
11588 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
11589 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
11590 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
11593 # TVI925 DIP switches. In each of these, D = Down and U = Up,
11595 # Here are the settings for the external (baud) switches (S1):
11598 # 7 8 9 10 [Printer]
11599 # 1 2 3 4 [Main RS232]
11600 # -----------------------------------------------------
11619 # Settings for word length and stop-bits (S1)
11621 # Position Description
11623 # ---------------------------
11630 # S2 (external) settings
11632 # Position Up Dn Description
11633 # --------------------------------------------
11635 # X Duplex edit (transmit editing keys)
11636 # --------------------------------------------
11637 # 2 X 912/920 emulation
11639 # --------------------------------------------
11643 # --------------------------------------------
11647 # --------------------------------------------
11651 # --------------------------------------------
11655 # --------------------------------------------
11659 # --------------------------------------------
11660 # 6 X White on black display
11661 # X Black on white display
11662 # --------------------------------------------
11665 # --------------------------------------------
11668 # --------------------------------------------
11671 # --------------------------------------------
11674 # --------------------------------------------
11675 # 10 X CR/LF (Auto LF)
11678 # S3 (internal switch) settings:
11680 # Position Up Dn Description
11681 # --------------------------------------------
11684 # --------------------------------------------
11687 # --------------------------------------------
11690 # --------------------------------------------
11693 # --------------------------------------------
11696 # --------------------------------------------
11697 # 4 X Blinking block cursor
11699 # --------------------------------------------
11700 # 4 X Blinking underline cursor
11702 # --------------------------------------------
11703 # 4 X Steady block cursor
11705 # --------------------------------------------
11706 # 4 X Steady underline cursor
11708 # --------------------------------------------
11709 # 6 X Screen blanking timer (ON)
11710 # X Screen blanking timer (OFF)
11711 # --------------------------------------------
11712 # 7 X Page attributes
11713 # X Line attributes
11714 # --------------------------------------------
11715 # 8 X DCD disconnected
11717 # --------------------------------------------
11718 # 9 X DSR disconnected
11720 # --------------------------------------------
11721 # 10 X DTR Disconnected
11723 # --------------------------------------------
11725 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
11726 tvi925|TeleVideo 925,
11727 OTbs, am, bw, hs, ul,
11728 cols#80, lines#24, xmc#1,
11729 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
11730 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11731 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
11732 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
11733 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
11734 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11735 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11736 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11737 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
11738 tsl=\Eh\Ef, use=adm+sgr,
11739 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
11740 # to avoid "magic cookie" standout glitch:
11741 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
11743 kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
11745 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
11746 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
11747 # for additional capabilities,
11748 # The following tvi descriptions from B:pjphar and virus!mike
11749 # is for all 950s. It sets the following attributes:
11750 # full duplex (\EDF) write protect off (\E()
11751 # conversation mode (\EC) graphics mode off (\E%)
11752 # white on black (\Ed) auto page flip off (\Ew)
11753 # turn off status line (\Eg) clear status line (\Ef\r)
11754 # normal video (\E0) monitor mode off (\EX or \Eu)
11755 # edit mode (\Er) load blank char to space (\Ee\040)
11756 # line edit mode (\EO) enable buffer control (^O)
11757 # protect mode off (\E\047) duplex edit keys (\El)
11758 # program unshifted send key to send line all (\E016)
11759 # program shifted send key to send line unprotected (\E004)
11760 # set the following to nulls:
11761 # field delimiter (\Ex0\200\200)
11762 # line delimiter (\Ex1\200\200)
11763 # start-protected field delimiter (\Ex2\200\200)
11764 # end-protected field delimiter (\Ex3\200\200)
11765 # set end of text delimiter to carriage return/null (\Ex4\r\200)
11767 # TVI 950 Switch Setting Reference Charts
11771 # S1 1 2 3 4 5 6 7 8 9 10
11772 # +-----------------------+-----+-----+-----------------------+
11773 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
11774 # | |Bits |Bits | |
11775 # +------+-----------------------+-----+-----+-----------------------+
11776 # | Up | See | 7 | 2 | See |
11777 # +------+-----------------------+-----+-----+-----------------------+
11778 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
11779 # +------+-----------------------+-----+-----+-----------------------+
11782 # S2 1 2 3 4 5 6 7 8 9 10
11783 # +-----+-----+-----------------+-----+-----------+-----+-----+
11784 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
11785 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11786 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
11787 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11788 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
11789 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11793 # +-----------+-----+-----+-----+-----+-----------+
11794 # | Display | 1 | 2 | 3 | 4 | Baud |
11795 # +-----------+-----+-----+-----+-----+ |
11796 # | Printer | 7 | 8 | 9 | 10 | Rate |
11797 # +-----------+-----+-----+-----+-----+-----------+
11798 # | D | D | D | D | 9600 |
11799 # | U | D | D | D | 50 |
11800 # | D | U | D | D | 75 |
11801 # | U | U | D | D | 110 |
11802 # | D | D | U | D | 135 |
11803 # | U | D | U | D | 150 |
11804 # | D | U | U | D | 300 |
11805 # | U | U | U | D | 600 |
11806 # | D | D | D | U | 1200 |
11807 # | U | D | D | U | 1800 |
11808 # | D | U | D | U | 2400 |
11809 # | U | U | D | U | 3600 |
11810 # | D | D | U | U | 4800 |
11811 # | U | D | U | U | 7200 |
11812 # | D | U | U | U | 9600 |
11813 # | U | U | U | U | 19200 |
11814 # +-----+-----+-----+-----+-----------+
11817 # +-----+-----+-----+-----------+
11818 # | 3 | 4 | 5 | Parity |
11819 # +-----+-----+-----+-----------+
11820 # | X | X | D | None |
11821 # | D | D | U | Odd |
11822 # | D | U | U | Even |
11823 # | U | D | U | Mark |
11824 # | U | U | U | Space |
11825 # +-----+-----+-----+-----------+
11829 # +-----+-----+-----------------+
11830 # | 7 | 8 | Communication |
11831 # +-----+-----+-----------------+
11832 # | D | D | Half Duplex |
11833 # | D | U | Full Duplex |
11834 # | U | D | Block |
11835 # | U | U | Local |
11836 # +-----+-----+-----------------+
11838 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
11839 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
11840 # should be present and all tvi native modes use the same string for this.
11841 # Finally, note that BSD has cud1=^V. -- esr)
11843 # TVI 950 has 11 function-keys -TD
11844 tvi950|TeleVideo 950,
11845 OTbs, am, hs, mir, msgr, xenl, xon,
11846 cols#80, it#8, lines#24, xmc#1,
11847 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
11848 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11849 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11850 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
11851 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
11853 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11854 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11856 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
11857 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
11858 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11859 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
11860 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
11861 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
11862 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
11863 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
11864 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11866 # is for 950 with two pages adds the following:
11867 # set 48 line page (\E\\2)
11868 # place cursor at page 0, line 24, column 1 (\E-07 )
11869 # set local (no send) edit keys (\Ek)
11871 # two page 950 adds the following:
11872 # when entering ex, set 24 line page (\E\\1)
11873 # when exiting ex, reset 48 line page (\E\\2)
11874 # place cursor at 0,24,1 (\E-07 )
11875 # set duplex (send) edit keys (\El) when entering vi
11876 # set local (no send) edit keys (\Ek) when exiting vi
11878 tvi950-2p|TeleVideo 950 w/2 pages,
11879 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11880 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11882 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11883 smkx=\El, use=tvi950,
11885 # is for 950 with four pages adds the following:
11886 # set 96 line page (\E\\3)
11887 # place cursor at page 0, line 24, column 1 (\E-07 )
11889 # four page 950 adds the following:
11890 # when entering ex, set 24 line page (\E\\1)
11891 # when exiting ex, reset 96 line page (\E\\3)
11892 # place cursor at 0,24,1 (\E-07 )
11894 tvi950-4p|TeleVideo 950 w/4 pages,
11895 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11896 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11898 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11899 smkx=\El, use=tvi950,
11901 # <is2> for reverse video 950 changes the following:
11902 # set reverse video (\Ed)
11904 # set vb accordingly (\Ed ...delay... \Eb)
11906 tvi950-rv|TeleVideo 950 rev video,
11907 flash=\Ed$<200/>\Eb,
11908 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11909 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
11913 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
11914 tvi950-rv-2p|TeleVideo 950 rev video w/2 pages,
11915 flash=\Ed$<200/>\Eb,
11916 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11917 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11919 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11920 smkx=\El, use=tvi950,
11922 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
11923 tvi950-rv-4p|TeleVideo 950 rev video w/4 pages,
11924 flash=\Ed$<200/>\Eb,
11925 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11926 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11928 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11929 smkx=\El, use=tvi950,
11930 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
11931 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
11932 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
11933 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
11934 # the :ko: string had :cl: in it, which means that one of the original
11935 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
11936 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
11937 # ko implies -- esr)
11938 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
11940 tvi955|TeleVideo 955,
11943 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
11944 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
11945 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
11946 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
11947 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
11948 rmam=\E[=7l, rmxon=^N,
11949 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
11951 sgr0=\EG0\E[=5l, smam=\E[=7h, smxon=^O, use=tvi950,
11952 tvi955-w|955-w|TeleVideo 955 w/132 cols,
11954 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
11955 # use half-intensity as normal mode, full intensity as <bold>
11956 tvi955-hb|955-hb|TeleVideo 955 half-bright,
11957 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
11958 sgr0=\EG0\E[=5h, use=tvi955,
11959 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
11960 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
11961 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
11962 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
11963 # it does to the function keys. I deduced <rmam>/<smam>.
11964 # also added empty <acsc> to suppress tic warning, -- esr)
11965 tvi970|TeleVideo 970,
11966 OTbs, OTpt, am, da, db, mir, msgr,
11967 cols#80, it#8, lines#24,
11968 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
11969 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
11970 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
11971 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
11972 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
11973 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
11974 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
11975 kf7=\E?g, kf8=\E?h, kf9=\E?i, ri=\EM, rmacs=\E(B,
11976 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
11977 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
11978 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
11979 smul=\E[4m, vpa=\E[%i%p1%dd, use=ansi+arrows,
11981 tvi970-vb|TeleVideo 970 with visual bell,
11982 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
11984 tvi970-2p|TeleVideo 970 with using 2 pages of memory,
11985 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
11987 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
11988 # per line (rather than 40), Esc K chooses the normal character set. Not sure
11989 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
11990 # <smul> strings are klutzy, but at least use no screen space.
11991 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
11992 # its absence means <smam>=\Ev isn't safe to use. -- esr)
11993 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
11994 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
11995 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
11996 tvipt|TeleVideo personal terminal,
11999 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
12000 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
12001 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
12002 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
12003 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
12004 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
12005 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
12006 tvi9065|TeleVideo 9065,
12007 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
12008 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
12010 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
12011 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
12012 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^V,
12013 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12014 cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
12015 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
12016 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
12017 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
12018 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
12019 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
12020 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
12021 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
12022 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
12023 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12024 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
12025 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
12026 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
12027 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
12028 pfx=\E|%p1%{48}%+%c1%p2%s\031,
12029 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
12030 rep=\E[%p2%db%p1%c, rev=\EG4,
12031 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
12032 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
12033 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
12034 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
12035 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
12036 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
12037 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
12038 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
12039 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
12041 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
12042 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
12044 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
12045 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
12046 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ansi+local,
12051 # In September 1993, Visual Technology of Westboro, Massachusetts,
12052 # merged with White Pine Software of Nashua, New Hampshire.
12054 # White Pine Software may be contacted at +1 603/886-9050.
12055 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
12058 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
12059 # Recently I hacked together the following termcap for Visual
12060 # Technology's Visual 50 terminal. It's a slight modification of
12061 # the VT52 termcap.
12062 # It's intended to run when the Visual 50 is in VT52 emulation mode
12063 # (I know what you're thinking; if it's emulating a VT52, then why
12064 # another termcap? Well, it turns out that the Visual 50 can handle
12065 # <dl1> and db(?) among other things, which the VT52 can't)
12066 # The termcap works OK for the most part. The only problem is on
12067 # character inserts. The whole line gets painfully redrawn for each
12068 # character typed. Any suggestions?
12069 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
12070 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
12071 # disguise; <kf7>-<kf9> are really l1-l3.
12073 OTbs, OTpt, am, da, db, msgr,
12074 OTnl=\n, cbt=\Ez$<4/>, cub1=^H, dl1=\EM$<3*/>,
12075 el=\EK$<16/>, il1=\EL, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
12076 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
12077 rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, use=vt52-basic,
12078 # this one was BSD & SCO's vi50
12079 vi50adm|Visual 50 in adm3a mode,
12081 cols#80, it#8, lines#24,
12082 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12083 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
12084 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
12085 khome=\EH, rmso=\ET, smso=\EU, use=vt52+arrows,
12086 # From: Jeff Siegal <jbs@quiotix.com>
12088 OTbs, am, mir, msgr,
12089 cols#80, it#8, lines#24,
12090 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
12091 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
12092 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
12093 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, ri=\EI,
12094 rmir=\Eb, rmso=\ET, smir=\Ea, smso=\EU, use=vt52+arrows,
12096 # Visual 200 from BRL
12097 # The following switch settings are assumed for normal operation:
12098 # FULL_DUPLEX SCROLL CR
12099 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
12100 # Other switches may be set for operator convenience or communication
12102 # Character insertion is kludged in order to get around the "beep" misfeature.
12103 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
12104 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
12105 # and <dl1> strings, but we seem to get along fine without them.
12107 OTbs, OTpt, am, mir, msgr,
12108 OTkn#10, cols#80, it#8, lines#24,
12109 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
12110 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
12111 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
12112 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
12113 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
12114 kctab=\E2, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
12115 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
12116 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
12117 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
12118 rmacs=\EG, rmkx=\E>, rmso=\E3,
12119 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
12120 smkx=\E=, smso=\E4, tbc=\Eg, use=vt52+arrows,
12121 # The older Visuals didn't come with function keys. This entry uses
12122 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
12123 # If your version of vi doesn't support function keys you may want
12125 vi200-f|Visual 200 no function keys,
12126 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, rmso@, smso@, use=vi200,
12127 vi200-rv|Visual 200 reverse video,
12128 cnorm@, cvvis@, ri@, use=vi200,
12130 # the function keys are programmable but we don't reprogram them to their
12131 # default values with <is2> because programming them is very verbose. maybe
12132 # an initialization file should be made for the 300 and they could be stuck
12134 # (vi300: added <rmam>/<smam> based on init string -- esr)
12135 vi300|Visual 300 ANSI x3.64,
12138 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H,
12139 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P$<40>, dl1=\E[M, ed=\E[J,
12140 el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\n,
12141 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
12142 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12143 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
12144 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
12145 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
12146 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
12147 smso=\E[1m, smul=\E[4m, use=ansi+local1,
12149 # some of the vi300s have older firmware that has the command
12150 # sequence for setting editing extent reversed.
12151 vi300-old|Visual 300 with old firmware (set edit extent reversed),
12152 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
12154 # Visual 500 prototype entry from University of Wisconsin.
12155 # The best place to look for the escape sequences is page A1-1 of the
12156 # Visual 500 manual. The initialization sequence given here may be
12157 # overkill, but it does leave out some of the initializations which can
12158 # be done with the menus in set-up mode.
12159 # The :xp: line below is so that emacs can understand the padding requirements
12160 # of this slow terminal. :xp: is 10 time the padding factor.
12161 # (vi500: removed unknown :xp#4: termcap;
12162 # also added empty <acsc> to suppress tic warning -- esr)
12165 cols#80, it#8, lines#33,
12166 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
12167 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
12168 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12169 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
12170 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
12172 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
12173 kbs=^H, khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
12174 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
12177 # The visual 550 is a visual 300 with Tektronix graphics,
12178 # and with 33 lines. clear screen is modified here to
12179 # also clear the graphics.
12180 vi550|Visual 550 ANSI x3.64,
12182 clear=\030\E[H\E[2J, use=vi300,
12184 vi603|visual603|Visual 603,
12186 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
12187 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
12188 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
12189 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, ind=\ED,
12190 is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, rev=\E[7m,
12191 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
12192 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12193 tsl=\EP2~, use=ansi+idl1, use=decid+cpr, use=vt100+4bsd,
12198 # 3471 North First Street
12199 # San Jose, CA 95134
12200 # Vox: (408)-473-1200
12201 # Fax: (408) 473-1222
12202 # Web: http://www.wyse.com
12204 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
12205 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
12206 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
12207 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
12210 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
12211 # They now own the Qume and Amdek brands, too. So these are the people to
12212 # talk with about all Link, Qume, and Amdek terminals.
12214 # These entries include a few small fixes.
12215 # I canceled the bel capacities in the vb entries.
12216 # I made two trivial syntax fixes in the wyse30 entry.
12217 # I made some entries relative to adm+sgr.
12220 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
12222 # Although the Wyse 30 can support more than one attribute
12223 # it requires magic cookies to do so. Many applications do not
12224 # function well with magic cookies. The following terminfo uses
12225 # the protect mode to support one attribute (dim) without cookies.
12226 # If more than one attribute is needed then the wy30-mc terminfo
12229 wy30|wyse30|Wyse 30,
12230 am, bw, mc5i, mir, msgr, xon,
12231 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12232 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
12233 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
12234 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12235 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
12236 ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, home=^^,
12237 ht=\011$<1>, hts=\E1, il1=\EE$<2>, ind=\n$<2>, ip=$<2>,
12238 is2=\E'\E(\E\^3\E`9\016\024, kHOM=\E{, kbs=^H, kcbt=\EI,
12239 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12240 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
12241 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
12242 khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er,
12243 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12244 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12245 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
12246 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12247 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12248 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12249 smso=\E`7\E), tbc=\E0, use=wyse+sl,
12251 # This terminal description uses the non-hidden attribute mode
12252 # (with magic cookie).
12254 # (wy30-mc: added <smcup> to suppress tic warning --esr)
12255 wy30-mc|wyse30-mc|Wyse 30 with magic cookies,
12258 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
12259 rmcup=\EG0, rmso=\EG0,
12260 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12261 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12262 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12263 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12264 smso=\EG4, use=wy30, use=adm+sgr,
12265 # The mandatory pause used by <flash> does not work with
12266 # older versions of terminfo. If you see this effect then
12267 # unset xon and delete the / from the delay.
12268 # i.e. change $<100/> to $<100>
12269 wy30-vb|wyse30-vb|Wyse 30 visible bell,
12272 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
12273 # Normal) without magic cookies by using the protect mode.
12274 # The following description uses this feature, but when more
12275 # than one attribute is put on the screen at once, all attributes
12276 # will be changed to be the same as the last attribute given.
12277 # The Wyse 50 can support more attributes when used with magic
12278 # cookies. The wy50-mc terminal description uses magic cookies
12279 # to correctly handle multiple attributes on a screen.
12281 wy50|wyse50|Wyse 50,
12282 am, bw, mc5i, mir, msgr, xon,
12283 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12284 acsc=a;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, cbt=\EI,
12285 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
12286 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12287 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, ed=\EY$<20>,
12288 el=\ET, flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
12289 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12290 is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12291 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12292 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12293 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12294 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12295 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12296 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12297 mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12298 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12299 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
12300 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12301 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
12303 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12304 smso=\E`6\E), tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
12305 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
12306 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
12307 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=wyse+sl,
12308 wyse+sl|status line for Wyse terminals,
12311 dsl=\EF\r, fsl=\r, tsl=\EF,
12313 # This terminal description uses the non-hidden attribute mode
12314 # (with magic cookie).
12316 # The mandatory pause used by flash does not work with some
12317 # older versions of terminfo. If you see this effect then
12318 # unset <xon> and delete the / from the delay.
12319 # i.e. change $<100/> to $<100>
12320 # (wy50-mc: added <smcup> to suppress tic warning --esr)
12321 wy50-mc|wyse50-mc|Wyse 50 with magic cookies,
12324 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
12325 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
12326 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12327 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12328 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12329 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12330 smso=\EGt, use=wy50, use=adm+sgr,
12331 wy50-vb|wyse50-vb|Wyse 50 visible bell,
12333 wy50-w|wyse50-w|Wyse 50 132-column,
12334 cols#132, lw#7, nlab#16, wsl#97,
12335 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12337 wy50-wvb|wyse50-wvb|Wyse 50 132-column visible bell,
12341 # The Wyse 350 is a Wyse 50 with color.
12342 # Unfortunately this means that it has magic cookies.
12343 # The color attributes are designed to overlap the reverse, dim and
12344 # underline attributes. This is nice for monochrome applications
12345 # because you can make underline stuff green (or any other color)
12346 # but for true color applications it's not so hot because you cannot
12347 # mix color with reverse, dim or underline.
12348 # To further complicate things one of the attributes must be
12349 # black (either the foreground or the background). In reverse video
12350 # the background changes color with black letters. In normal video
12351 # the foreground changes colors on a black background.
12352 # This terminfo uses some of the more advanced features of curses
12353 # to display both color and blink. In the final analysis I am not
12354 # sure that the wy350 runs better with this terminfo than it does
12355 # with the wy50 terminfo (with user adjusted colors).
12357 # The mandatory pause used by flash does not work with
12358 # older versions of terminfo. If you see this effect then
12359 # unset xon and delete the / from the delay.
12360 # i.e. change $<100/> to $<100>
12362 # Bug: The <op> capability resets attributes.
12363 wy350|wyse350|Wyse 350,
12364 am, bw, mc5i, mir, xon,
12365 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
12367 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
12368 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
12369 cub1=^H, cud1=\n, cuf1=^L,
12370 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
12371 dim=\EGp, dl1=\ER, ed=\EY$<20>, el=\ET,
12372 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, il1=\EE,
12373 ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12374 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
12375 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12376 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
12377 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12378 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
12379 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12380 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
12381 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
12382 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12383 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
12384 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
12385 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
12386 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
12387 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
12389 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
12390 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
12391 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
12393 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
12394 smir=\Eq, smln=\EA10, tbc=\E0, use=adm+sgr, use=wyse+sl,
12395 wy350-vb|wyse350-vb|Wyse 350 visible bell,
12397 wy350-w|wyse350-w|Wyse 350 132-column,
12398 cols#132, lw#7, nlab#16, wsl#97,
12399 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12401 wy350-wvb|wyse350-wvb|Wyse 350 132-column visible bell,
12404 # This terminfo description is untested.
12405 # The wyse100 emulates an adm31, so the adm31 entry should work.
12409 cols#80, lines#24, xmc#1,
12410 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12411 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12412 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
12413 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
12414 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
12415 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
12416 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
12418 # The Wyse 120/150 has most of the features of the Wyse 60.
12419 # This terminal does not need padding up to 9600 baud!
12420 # <msgr> should be set but the clear screen fails when in
12421 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12424 wy120|wyse120|wy150|wyse150|Wyse 120/150,
12425 am, bw, km, mc5i, mir, msgr, xon,
12426 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601,
12427 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12428 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12429 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12430 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12431 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
12432 flash=\E`8$<100/>\E`9, home=^^, ht=\011$<1>, hts=\E1,
12433 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12434 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12436 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12437 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12438 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12439 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12440 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12441 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12442 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12443 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12444 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12445 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12446 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12447 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
12448 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
12449 rs3=\EwG\Ee($<100>,
12450 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12451 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12452 %{64}%|%;%?%p7%t%{1}%|%;%c,
12453 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12454 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12455 tbc=\E0, use=adm+sgr, use=wyse+sl,
12457 wy120-w|wyse120-w|wy150-w|wyse150-w|Wyse 120/150 132-column,
12458 cols#132, lw#7, nlab#16, wsl#97,
12459 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12460 rs2=\E`;$<70>, use=wy120,
12462 wy120-25|wyse120-25|wy150-25|wyse150-25|Wyse 120/150 80-column 25-lines,
12463 lh@, lines#25, lw@, nlab@,
12464 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
12466 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|Wyse 120/150 132-column 25-lines,
12467 lh@, lines#25, lw@, nlab@,
12468 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
12470 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
12473 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
12476 # The Wyse 60 is like the Wyse 50 but with more padding.
12477 # The reset strings are slow and the pad times very depending
12478 # on other parameters such as font loading. I have tried
12479 # to follow the following outline:
12481 # <rs1> -> set personality
12482 # <rs2> -> set number of columns
12483 # <rs3> -> set number of lines
12484 # <is1> -> select the proper font
12485 # <is2> -> do the initialization
12486 # <is3> -> set up display memory (2 pages)
12488 # The Wyse 60's that have VT100 emulation are slower than the
12489 # older Wyse 60's. This change happened mid-1987.
12490 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
12492 # The meta key is only half right. This terminal will return the
12493 # high order bit set when you hit CTRL-function_key
12495 # It may be useful to assign two function keys with the
12496 # values \E=(\s look at old data in page 1
12497 # \E=W, look at bottom of page 1
12498 # where \s is a space ( ).
12501 # The Wyse 60 runs faster when the XON/XOFF
12502 # handshake is turned off.
12504 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
12505 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12506 wy60|wyse60|Wyse 60,
12507 am, bw, km, mc5i, mir, msgr,
12508 cols#80, lh#1, lines#24, lw#8, nlab#8,
12509 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12510 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
12511 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12512 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12513 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>,
12514 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, home=\E{,
12515 ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, ip=$<3>,
12517 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12519 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12520 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12521 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12522 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12523 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12524 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12525 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12526 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12527 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12528 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12529 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
12530 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
12531 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
12532 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
12533 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12534 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12535 %{64}%|%;%?%p7%t%{1}%|%;%c,
12536 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12537 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12538 tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF12=^Ak\r,
12539 kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, kF2=^Aa\r,
12540 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
12541 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, use=wyse+sl,
12543 wy60-w|wyse60-w|Wyse 60 132-column,
12544 cols#132, lw#7, nlab#16, wsl#97,
12545 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
12546 rs2=\EeF$<150>\E`;$<150>, use=wy60,
12548 wy60-25|wyse60-25|Wyse 60 80-column 25-lines,
12549 lh@, lines#25, lw@, nlab@,
12550 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
12551 wy60-25-w|wyse60-25-w|Wyse 60 132-column 25-lines,
12552 lh@, lines#25, lw@, nlab@,
12553 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
12555 wy60-42|wyse60-42|Wyse 60 80-column 42-lines,
12557 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
12558 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
12559 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
12560 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
12561 wy60-42-w|wyse60-42-w|Wyse 60 132-column 42-lines,
12562 cols#132, lw#7, nlab#16, wsl#97,
12563 cup=\Ea%i%p1%dR%p2%dC$<2>, dch1=\EW$<19>,
12564 home=\036$<2>, ip=$<6>, nel=\r\n$<11>,
12565 rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
12567 wy60-43|wyse60-43|Wyse 60 80-column 43-lines,
12568 lh@, lines#43, lw@, nlab@,
12569 pln@, rs3=\Ee+$<150>, use=wy60-42,
12570 wy60-43-w|wyse60-43-w|Wyse 60 132-column 43-lines,
12571 lh@, lines#43, lw@, nlab@,
12572 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
12574 wy60-vb|wyse60-vb|Wyse 60 visible bell,
12576 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
12579 # The Wyse-99GT looks at lot like the Wyse 60 except that it
12580 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
12581 # setup parameter controls the number of lines on the screen.
12582 # For the Wyse 99GT the "lines" setup parameter controls the
12583 # number of lines in a page. The screen can display 25 lines max.
12584 # The Wyse-99GT also has personalities for the VT220 and
12585 # Tektronix 4014. But this has no bearing on the native mode.
12587 # (msgr) should be set but the clear screen fails when in
12588 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12589 # then set msgr, else use msgr@.
12591 # u0 -> enter Tektronix mode
12592 # u1 -> exit Tektronix mode
12594 wy99gt|wyse99gt|Wyse 99gt,
12596 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
12597 el=\Et$<5>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
12598 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1,
12599 u0=\E~>\E8, u1=\E[42h, use=wy60,
12601 wy99gt-w|wyse99gt-w|Wyse 99gt 132-column,
12602 cols#132, lw#7, nlab#16, wsl#97,
12603 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12604 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
12607 wy99gt-25|wyse99gt-25|Wyse 99gt 80-column 25-lines,
12608 lh@, lines#25, lw@, nlab@,
12609 pln@, rs3=\EwG\Ee)$<200>, use=wy99gt,
12611 wy99gt-25-w|wyse99gt-25-w|Wyse 99gt 132-column 25-lines,
12612 lh@, lines#25, lw@, nlab@,
12613 pln@, rs2=\E`;$<150>, use=wy99gt-w,
12615 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
12618 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
12619 bel@, use=wy99gt-w,
12621 # Can't set tabs! Other bugs (ANSI mode only):
12622 # - can't redefine function keys (anyway, key redefinition in ANSI mode
12623 # is too much complex to be described);
12624 # - meta key can't be described (the terminal forgets it when reset);
12625 # The xon-xoff handshaking can't be disabled while in ANSI personality, so
12626 # emacs can't work at speed greater than 9600 baud. No padding is needed at
12628 # dch1 has been commented out because it causes annoying glittering when
12629 # vi deletes one character at the beginning of a line with tabs in it.
12630 # dch makes sysgen(1M) have a horrible behaviour when deleting
12631 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
12632 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
12633 # not, so smir and rmir are commented out as well.
12634 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12635 wy99-ansi|Wyse WY-99GT in ANSI mode (int'l PC keyboard),
12636 am, km, mir, msgr, xenl,
12637 cols#80, it#8, lines#25, vt#3,
12638 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
12639 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<200>,
12640 cnorm=\E[34h\E[?25h, cr=\r, cub=\E[%p1%dD$<1>,
12641 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
12642 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
12643 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
12644 cvvis=\E[34l\E[?25h, dim=\E[2m, ech=\E[%p1%dX,
12645 ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, enacs=\E)0,
12646 flash=\E[?5h$<30/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
12647 ht=^I, ich=\E[%p1%d@, ind=\n$<1>,
12648 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
12649 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
12650 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12651 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
12652 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
12653 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
12654 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
12655 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
12656 nel=\EE, prot=\E[1"q, ri=\EM, rmacs=^O, rmam=\E[?7l,
12657 rmir=\E[4l, rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
12658 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
12659 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
12661 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
12662 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
12663 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
12664 smkx=\E[?1h, vpa=\E[%i%p1%dd, use=ansi+csr, use=ansi+idl,
12665 use=ansi+pp, use=ansi+sgrbold,
12667 # This is the american terminal. Here tabs work fine.
12668 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12669 wy99a-ansi|Wyse WY-99GT in ANSI mode (US PC keyboard),
12670 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
12672 # This terminal (firmware version 02) has a lot of bugs:
12673 # - can't set tabs;
12674 # - other bugs in ANSI modes (see above).
12675 # This description disables handshaking when using cup. This is because
12676 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
12677 # cannot be used at speeds greater than 9600 baud, because at greater
12678 # speeds handshaking is needed even for character sending. If you use
12679 # DTR handshaking, you can use even greater speeds.
12680 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12681 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
12682 am, bw, km, mc5i, mir, msgr, xon,
12683 cols#80, it#8, lines#25,
12684 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
12685 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
12686 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
12687 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12688 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, ed=\EY$<8*>,
12689 el=\ET$<8>, enacs=\Ec@1J$<2000>,
12690 flash=\E\^1$<30/>\E\^0, home=^^, ht=^I, il1=\EE, ind=\n,
12692 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
12693 \^0\E`1\E`4\Ee.\E`:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"
12695 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
12696 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
12697 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
12698 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
12699 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
12700 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12701 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
12702 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
12703 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
12704 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
12705 9\E\^0\E`1\E`4\Ee.\E`:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
12706 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
12707 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
12708 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
12710 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
12711 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, use=wyse+sl,
12713 # This is the american terminal. Here tabs work.
12714 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12715 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
12716 hts=\E1, tbc=\E0, use=wy99f,
12719 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
12720 # The reset strings are slow and the pad times very depending
12721 # on other parameters such as font loading. I have tried
12722 # to follow the following outline:
12724 # <rs1> -> set personality
12725 # <rs2> -> set number of columns
12726 # <rs3> -> set number of lines
12727 # <is1> -> select the proper font
12728 # <is2> -> do the initialization
12729 # <is3> -> set up display memory (2 pages)
12731 # The display memory may be used for either text or graphics.
12732 # When "Display Memory = Shared" the terminal will have more pages
12733 # but garbage may be left on the screen when you switch from
12734 # graphics to text. If "Display Memory = Unshared" then the
12735 # text area will be only one page long.
12737 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
12738 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12739 wy160|wyse160|Wyse 160,
12740 am, bw, km, mc5i, mir, msgr,
12741 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
12742 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12743 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
12744 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12745 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
12746 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, ed=\EY$<30>, el=\ET$<5>,
12747 flash=\E`8$<100/>\E`9, home=\E{, ht=^I, hts=\E1,
12748 il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
12749 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12751 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12752 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12753 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12754 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12755 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12756 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12757 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12758 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
12759 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12760 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12761 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
12762 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
12763 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
12764 rs2=\E`:$<100>, rs3=\EwG\Ee($<140>,
12765 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12766 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12767 %{64}%|%;%?%p7%t%{1}%|%;%c,
12768 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12769 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12770 tbc=\E0, use=adm+sgr, use=wyse+sl,
12772 wy160-w|wyse160-w|Wyse 160 132-column,
12773 cols#132, lw#7, nlab#16, wsl#90,
12774 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
12775 rs2=\EeF$<150>\E`;$<150>, use=wy160,
12777 wy160-25|wyse160-25|Wyse 160 80-column 25-lines,
12778 lh@, lines#25, lw@, nlab@,
12779 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
12780 wy160-25-w|wyse160-25-w|Wyse 160 132-column 25-lines,
12781 lh@, lines#25, lw@, nlab@,
12782 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
12784 wy160-42|wyse160-42|Wyse 160 80-column 42-lines,
12786 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
12787 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
12788 rs3=\Ee*$<150>, use=wy160,
12789 wy160-42-w|wyse160-42-w|Wyse 160 132-column 42-lines,
12790 cols#132, lw#7, nlab#16, wsl#90,
12791 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
12792 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
12794 wy160-43|wyse160-43|Wyse 160 80-column 43-lines,
12795 lh@, lines#43, lw@, nlab@,
12796 pln@, rs3=\Ee+$<150>, use=wy160-42,
12797 wy160-43-w|wyse160-43-w|Wyse 160 132-column 43-lines,
12798 lh@, lines#43, lw@, nlab@,
12799 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
12801 wy160-vb|wyse160-vb|Wyse 160 visible bell,
12803 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
12806 # The Wyse 75 is a VT100 lookalike without advanced video.
12808 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
12809 # Underline) without magic cookies. The following description
12810 # uses this capability, but when more than one attribute is
12811 # put on the screen at once, all attributes will be changed
12812 # to be the same as the last attribute given.
12813 # The Wyse 75 can support more attributes when used with magic
12814 # cookies. The wy75-mc terminal description uses magic cookies
12815 # to correctly handle multiple attributes on a screen.
12817 wy75|wyse75|Wyse 75,
12818 am, hs, mir, msgr, xenl, xon,
12819 cols#80, lines#24, ma#1, pb#1201, wsl#78,
12820 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12821 bel=^G, clear=\E[H\E[J$<30>, cr=\r,
12822 csr=\E[%i%p1%d;%p2%dr$<2>, cub1=^H, cud1=\n,
12823 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP$<3*>,
12824 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
12825 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
12826 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
12827 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
12828 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@$<1*>,
12829 il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>,
12830 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
12831 is2=\E>\E(B\E)0\017, is3=\E[m, kdl1=\E[M, kel=\E[K,
12832 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12833 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12834 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
12835 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
12836 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12837 khlp=\E[28~, kich1=\E[@, kil1=\E[L, knp=\E[6~, kpp=\E[5~,
12838 kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, rc=\E8, rev=\E[1t\E[7m,
12839 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
12840 rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
12841 rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, sc=\E7,
12842 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
12843 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
12845 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12846 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
12847 tsl=\E[>\,\001, use=ansi+arrows, use=ansi+local,
12848 use=ansi+pp, use=ansi+tabs, use=decid+cpr,
12849 use=vt220+cvis, use=vt220+keypad,
12851 # This terminal description uses the non-hidden attribute mode
12852 # (with magic cookie).
12854 wy75-mc|wyse75-mc|Wyse 75 with magic cookies,
12857 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
12858 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
12859 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
12860 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
12862 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
12864 wy75-vb|wyse75-vb|Wyse 75 with visible bell,
12867 wy75-w|wyse75-w|Wyse 75 in 132 column mode,
12869 rs2=\E[35h\E[?3h$<80>, use=wy75,
12870 wy75-wvb|wyse75-wvb|Wyse 75 with visible bell 132 columns,
12874 # Wyse 85 emulating a VT220 7 bit mode.
12875 # 24 line screen with status line.
12877 # The VT220 mode permits more function keys but it wipes out
12878 # the escape key. I strongly recommend that <f11> be set to
12880 # The terminal may have to be set for 8 data bits and 2 stop
12881 # bits for the arrow keys to work.
12882 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
12883 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
12884 # <dch> leave trash on the screen when used without XON/XOFF.
12886 wy85|wyse85|Wyse 85,
12887 hs, mir, xenl, xon,
12889 clear=\E[H\E[J$<110>, cub1=^H, cud1=\n,
12890 cup=\E[%i%p1%d;%p2%dH$<1>, dch=\E[%p1%dP$<3*>,
12891 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12892 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12893 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12894 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12895 ht=\011$<1>, ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>,
12896 il1=\E[L$<5>, ind=\n$<3>, ip=$<3>, is1=\E[62;1"p\E[?5W,
12897 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12898 is3=\E>\E(B\E)0\017\E[m, kf10=\E[21~, kf11=\E[23~,
12899 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12900 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12901 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12902 kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2,
12903 lf3=PF3, lf4=PF4, mc0=\E[0i, ri=\EM$<3>, rmam=\E[?7l,
12904 rmir=\E[4l, rmkx=\E>, rs1=\E[13l\E[3l\E!p,
12905 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l,
12906 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12907 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12908 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E=,
12909 tsl=\E[40h\E7\E[25;%i%p1%dH, use=ansi+arrows,
12910 use=ansi+csr, use=ansi+inittabs, use=ansi+local,
12911 use=ansi+pp, use=ansi+sgrbold, use=decid+cpr,
12912 use=vt100+4bsd, use=vt220+vtedit, use=vt220+cvis,
12915 # Wyse 85 with visual bell.
12916 wy85-vb|wyse85-vb|Wyse 85 with visible bell,
12917 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
12919 # Wyse 85 in 132-column mode.
12920 wy85-w|wyse85-w|Wyse 85 in 132-column mode,
12922 rs2=\E[35h$<70/>\E[?3h, use=wy85,
12924 # Wyse 85 in 132-column mode with visual bell.
12925 wy85-wvb|wyse85-wvb|Wyse 85 with visible bell 132-columns,
12928 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
12929 # This copes with an apparent firmware bug in the wy85. He writes:
12930 # "What I did was change leave the terminal cursor keys set to Normal
12931 # (instead of application), and change \E[ to \233 for all the keys in
12932 # terminfo. At one point, I found some reference indicating that this
12933 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
12934 # me), but I can't find that and the server under my bookmark to "Wyse
12935 # Technical" isn't responding. So there's the question of whether the wy85
12936 # terminfo should reflect the manufacturer's intended behaviour of the terminal
12938 wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode,
12939 hs, mir, xenl, xon,
12941 clear=\E[H\E[J$<110>, cub1=^H, cud1=\n,
12942 cup=\E[%i%p1%d;%p2%dH$<1>, dch=\E[%p1%dP$<3*>,
12943 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12944 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12945 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12946 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12947 ht=\011$<1>, ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>,
12948 il1=\E[L$<5>, ind=\n$<3>, ip=$<3>, is1=\E[62;1"p\E[?5W,
12949 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12950 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
12951 kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12952 kcuu1=\233A, kdch1=\2333~, kf10=\23321~, kf11=\23323~,
12953 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
12954 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
12955 kf20=\23334~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
12956 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\23326~,
12957 kich1=\2332~, knp=\2336~, kpp=\2335~, kslt=\2334~, lf1=PF1,
12958 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, ri=\EM$<3>,
12959 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rs1=\E[13l\E[3l\E!p,
12960 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l,
12961 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12962 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
12963 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E=,
12964 tsl=\E[40h\E7\E[25;%i%p1%dH, use=ansi+csr,
12965 use=ansi+inittabs, use=ansi+local, use=ansi+pp,
12966 use=ansi+sgrbold, use=decid+cpr, use=vt100+4bsd,
12967 use=vt100+pfkeys, use=vt220+cvis,
12969 # Wyse 185 emulating a VT320 7 bit mode.
12971 # This terminal always displays 25 lines. These lines may be used
12972 # as 24 data lines and a terminal status line (top or bottom) or
12973 # 25 data lines. The 48 and 50 line modes change the page size
12974 # and not the number of lines on the screen.
12976 # The Compose Character key can be used as a meta key if changed
12979 wy185|wyse185|Wyse 185,
12980 hs, km, mir, xenl, xon,
12982 civis=\E[?25l, clear=\E[H\E[J$<40>,
12983 cnorm=\E[34h\E[?25h, csr=\E[%i%p1%d;%p2%dr$<20>,
12984 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
12985 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
12986 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12987 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
12988 el=\E[K, el1=\E[1K, enacs=\E)0,
12989 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
12990 hpa=\E[%i%p1%d`, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
12991 il1=\E[L$<3>, ind=\n$<2>, ip=$<4>, is1=\E[?5W,
12992 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
12993 is3=\E>\E(B\E)0\017\E[m, kcbt=\E[Z, kf10=\E[21~,
12994 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12995 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12996 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
12997 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1,
12998 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, rc=\E8, ri=\EM$<2>,
12999 rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>,
13000 rmso=\E[27m, rmul=\E[24m,
13001 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
13002 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
13003 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13004 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13005 sgr0=\E[m\017, smam=\E[?7h, smcup=\E[ Q, smir=\E[4h,
13006 smkx=\E[?1l\E=, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
13007 use=ansi+arrows, use=ansi+inittabs, use=ansi+local,
13008 use=ansi+pp, use=ansi+sgrbold, use=decid+cpr,
13009 use=vt100+4bsd, use=vt220+vtedit, use=vt220+keypad,
13011 # Wyse 185 with 24 data lines and top status (terminal status)
13012 wy185-24|wyse185-24|Wyse 185 with 24 data lines,
13014 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13017 # Wyse 185 with visual bell.
13018 wy185-vb|wyse185-vb|Wyse 185+flash,
13021 # Wyse 185 in 132-column mode.
13022 wy185-w|wyse185-w|Wyse 185 in 132-column mode,
13024 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13025 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
13027 # Wyse 185 in 132-column mode with visual bell.
13028 wy185-wvb|wyse185-wvb|Wyse 185+flash+132 cols,
13031 # wy325 terminfo entries
13032 # Done by Joe H. Davis 3-9-92
13034 # lines 25 columns 80
13036 wy325|wyse325|Wyse epc,
13038 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601,
13039 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
13040 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
13041 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13042 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
13043 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
13044 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
13045 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
13046 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
13048 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
13049 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
13050 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
13051 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
13052 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
13053 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
13054 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
13055 mc0=\EP, mc4=^T, mc5=\Ed#,
13056 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
13057 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
13058 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
13059 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
13060 rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
13061 rs3=\EwG\Ee($<100>,
13062 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
13063 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
13064 %{64}%|%;%?%p7%t%{1}%|%;%c,
13065 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
13066 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
13067 use=adm+sgr, use=wyse+sl,
13070 # lines 24 columns 80 vb
13072 wy325-vb|wyse325-vb|Wyse-325 with visual bell,
13076 # lines 24 columns 132
13078 wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode,
13079 cols#132, lw#7, nlab#16, wsl#97,
13080 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
13081 rs2=\E`;$<70>, use=wy325,
13083 # lines 25 columns 80
13085 wy325-25|wyse325-25|wy325-80|wyse-325|Wyse-325 25 lines,
13086 lh@, lines#25, lw@, nlab@,
13087 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13089 # lines 25 columns 132
13091 wy325-25w|wyse325-25w|Wyse-325 132 columns,
13092 lh@, lines#25, lw@, nlab@,
13093 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13095 # lines 25 columns 132 vb
13097 wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video,
13101 # lines 42 columns 80
13103 wy325-42|wyse325-42|Wyse-325 42 lines,
13104 lh@, lines#42, lw@, nlab@,
13105 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13107 # lines 42 columns 132
13109 wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode,
13110 lh@, lines#42, lw@, nlab@,
13111 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13113 # lines 42 columns 132 vb
13115 wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell,
13118 # lines 43 columns 80
13120 wy325-43|wyse325-43|Wyse-325 43 lines,
13121 lh@, lines#43, lw@, nlab@,
13124 # lines 43 columns 132
13126 wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode,
13127 lh@, lines#43, lw@, nlab@,
13128 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13130 # lines 43 columns 132 vb
13132 wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell,
13135 # Wyse 370 -- 24 line screen with status line.
13137 # The terminal may have to be set for 8 data bits and 2 stop
13138 # bits for the arrow keys to work.
13140 # If you change keyboards the terminal will send different
13141 # escape sequences.
13142 # The following definition is for the basic terminal without
13145 # <u0> -> enter Tektronix 4010/4014 mode
13146 # <u1> -> exit Tektronix 4010/4014 mode
13147 # <u2> -> enter ASCII mode (from any ANSI mode)
13148 # <u3> -> exit ASCII mode (goto native ANSI mode)
13149 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
13150 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
13152 # Bug: The <op> capability resets attributes.
13153 wy370-nk|Wyse 370 without function keys,
13154 am, ccc, hs, mir, msgr, xenl, xon,
13155 colors#64, cols#80, lines#24, ncv#48, pairs#64, wsl#80,
13156 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13157 bel=^G, civis=\E[?25l, clear=\E[H\E[J$<40>,
13158 cnorm=\E[34h\E[?25h, cr=\r, cub1=^H, cud1=\n,
13159 cup=\E[%i%p1%d;%p2%dH$<1>, cvvis=\E[?25h\E[34l,
13160 dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, dclk=\E[31h,
13161 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[40l,
13162 ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, el=\E[K$<10>,
13163 el1=\E[1K$<12>, enacs=\E)0,
13164 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
13165 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>,
13166 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
13168 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
13169 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
13170 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
13171 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
13173 ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
13174 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
13175 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i,
13176 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
13177 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
13178 op=\E[m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmclk=\E[31l,
13179 rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
13180 rmul=\E[24m, rs1=\E[13l\E[3l\E!p\E[?4i,
13181 rs2=\E[35h\E[?3l$<8>, rs3=\E[?5l, setb=\E[62;%p1%dw,
13183 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13184 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13185 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
13186 smir=\E[4h, smkx=\E[?1l\E=,
13187 tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, u0=\E[?38h\E8,
13188 u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, u4=\E[92;76"p,
13189 u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, use=ansi+csr,
13190 use=ansi+inittabs, use=ansi+local, use=ansi+pp,
13191 use=ansi+sgrbold, use=decid+cpr,
13193 # Function key set for the ASCII (wy-50 compatible) keyboard
13194 # This is the default 370.
13196 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
13197 kcbt=\E[Z, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
13198 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13199 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
13200 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
13201 kf8=\E[19~, kf9=\E[20~, kich1=\EOP, kil1=\EOP, knp=\E[U,
13202 kpp=\E[V, use=ansi+arrows, use=wy370-nk,
13204 # Function key set for the VT-320 (and wy85) compatible keyboard
13206 wy370-105k|Wyse 370 with 105 key keyboard,
13207 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13208 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
13209 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~,
13210 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
13211 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13212 lf4=PF4, use=ansi+arrows, use=vt220+vtedit, use=wy370-nk,
13215 # Function key set for the PC compatible keyboard
13217 wy370-EPC|Wyse 370 with 102 key keyboard,
13218 kcbt=\E[Z, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
13219 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13220 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13221 kich1=\E[2~, knp=\E[U, kpp=\E[V, use=ansi+arrows,
13224 # Wyse 370 with visual bell.
13225 wy370-vb|Wyse 370 with visible bell,
13228 # Wyse 370 in 132-column mode.
13229 wy370-w|Wyse 370 in 132-column mode,
13231 rs2=\E[35h\E[?3h$<70>, use=wy370,
13233 # Wyse 370 in 132-column mode with visual bell.
13234 wy370-wvb|Wyse 370 with visible bell 132-columns,
13235 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
13236 wy370-rv|Wyse 370 reverse video,
13237 rs3=\E[32h\E[?5h, use=wy370,
13239 # Wyse 99gt Tektronix 4010/4014 emulator,
13241 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
13244 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13245 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13246 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13247 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13248 %{31}%&%{64}%+%c\037,
13250 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13253 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13255 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
13257 # Wyse 160 Tektronix 4010/4014 emulator,
13259 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
13260 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13261 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13262 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13263 %{31}%&%{64}%+%c\037,
13264 home=^]8`g @\037, use=wy99gt-tek,
13266 # Wyse 370 Tektronix 4010/4014 emulator,
13268 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
13271 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13272 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
13273 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
13274 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
13276 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13279 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13281 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
13282 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
13284 # Vendor-supplied Wyse entries end here.
13287 #TITLE: TERMINFO ENTRY WY520
13289 # The WY520 terminfo is based on the WY285 entry published on the WYSE
13290 # BBS with the addition of more function keys and special keys.
13292 # rs1 -> set personality
13293 # rs2 -> set number of columns
13294 # rs3 -> set number of lines
13295 # is1 -> select the proper font
13296 # is2 -> do the initialization
13297 # is3 -> If this string is empty then rs3 gets sent.
13299 # Wyse 520 emulating a VT420 7 bit mode with default ANSI keyboard
13300 # - The BS key is programmed to generate BS in smcup since
13301 # is2 doesn't seem to work.
13302 # - Remove and shift/Remove: delete a character
13303 # - Insert : enter insert mode
13304 # - Find : delete to end of file
13305 # - Select : clear a line
13306 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
13308 # - Bottom status line (host writable line) is used.
13309 # - smkx,rmkx are removed because this would put the numeric
13310 # keypad in Dec application mode which doesn't seem to work
13311 # with SCO applications.
13313 wy520|wyse520|Wyse 520,
13314 am, hs, km, mir, xenl, xon,
13315 cols#80, it#8, lines#24, wsl#80,
13316 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13317 bel=^G, civis=\E[?25l, clear=\E[H\E[J$<40>,
13318 cnorm=\E[34h\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<20>,
13319 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
13320 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
13321 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
13322 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
13323 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`,
13324 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
13325 ind=\n$<2>, ip=$<4>, is1=\E[?5W,
13326 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
13327 is3=\E>\E(B\E)0\017\E[m, kcbt=\E[Z, ked=\E[1~, kel=\E[4~,
13328 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13329 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
13330 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~,
13331 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
13332 khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
13333 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
13334 rmul=\E[24m, rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p,
13335 rs2=\E[35h\E[?3l, rs3=\E[?5l\E[47h\E[40l\E[r,
13336 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13337 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13338 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
13339 smcup=\E[ Q\E[?67;8h, smir=\E[4h,
13340 tsl=\E[2$~\E[1$}\E[%i%p1%d`, vpa=\E[%i%p1%dd,
13341 use=ansi+arrows, use=ansi+csr, use=ansi+local,
13342 use=ansi+pp, use=ansi+sgrbold, use=ansi+tabs,
13343 use=decid+cpr, use=vt220+vtedit, use=vt220+keypad,
13345 # Wyse 520 with 24 data lines and status (terminal status)
13346 wy520-24|wyse520-24|Wyse 520 with 24 data lines,
13348 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13351 # Wyse 520 with visual bell.
13352 wy520-vb|wyse520-vb|Wyse 520 with visible bell,
13353 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
13355 # Wyse 520 in 132-column mode.
13356 wy520-w|wyse520-w|Wyse 520 in 132-column mode,
13358 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13359 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
13361 # Wyse 520 in 132-column mode with visual bell.
13362 wy520-wvb|wyse520-wvb|Wyse 520 with visible bell 132-columns,
13363 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
13366 # Wyse 520 emulating a VT420 7 bit mode.
13367 # The DEL key is programmed to generate BS in is2.
13368 # With EPC keyboard.
13369 # - 'End' key will clear till end of line on EPC keyboard
13370 # - Shift/End : ignored.
13371 # - Insert : enter insert mode.
13372 # - Delete : delete a character (have to change interrupt character
13373 # to CTRL-C: stty intr '^c') for it to work since the
13374 # Delete key sends 7FH.
13375 wy520-epc|wyse520-epc|Wyse 520 with EPC keyboard,
13376 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
13377 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
13380 # Wyse 520 with 24 data lines and status (terminal status)
13381 # with EPC keyboard.
13382 wy520-epc-24|wyse520-pc-24|Wyse 520 with 24 data lines and EPC keyboard,
13384 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13387 # Wyse 520 with visual bell.
13388 wy520-epc-vb|wyse520-pc-vb|Wyse 520 with visible bell and EPC keyboard,
13389 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
13391 # Wyse 520 in 132-column mode.
13392 wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard,
13394 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13395 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
13397 # Wyse 520 in 132-column mode with visual bell.
13398 wy520-epc-wvb|wyse520-p-wvb|Wyse 520 with visible bell 132-columns and EPC keyboard,
13399 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
13401 # Wyse 520 in 80-column, 36 lines
13402 wy520-36|wyse520-36|Wyse 520 with 36 data lines,
13405 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13408 # Wyse 520 in 80-column, 48 lines
13409 wy520-48|wyse520-48|Wyse 520 with 48 data lines,
13412 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13415 # Wyse 520 in 132-column, 36 lines
13416 wy520-36w|wyse520-36w|Wyse 520 with 132 columns and 36 data lines,
13419 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13422 # Wyse 520 in 132-column, 48 lines
13423 wy520-48w|wyse520-48w|Wyse 520 with 48 data lines (132 column),
13426 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13430 # Wyse 520 in 80-column, 36 lines with EPC keyboard
13431 wy520-36pc|wyse520-36pc|Wyse 520 with 36 data lines and EPC keyboard,
13434 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13437 # Wyse 520 in 80-column, 48 lines with EPC keyboard
13438 wy520-48pc|wyse520-48pc|Wyse 520 with 48 data lines and EPC keyboard,
13441 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13444 # Wyse 520 in 132-column, 36 lines with EPC keyboard
13445 wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard (132 column),
13448 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13451 # Wyse 520 in 132-column, 48 lines with EPC keyboard
13452 wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard (132 column),
13455 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13458 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
13459 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
13460 # file and we don't know what <hts> is -- esr)
13461 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
13463 cols#80, it#8, lines#24,
13464 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
13465 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
13466 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
13467 is2=\E`:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
13468 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
13469 rmul=^O, rs1=\E`:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
13472 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
13473 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
13474 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13475 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
13478 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
13479 wy100q|Wyse 100 for Quotron,
13481 cols#80, lines#24, xmc#1,
13482 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
13483 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13484 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
13485 is2=\E`:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
13486 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
13488 #### Kermit terminal emulations
13490 # Obsolete Kermit versions may be listed in the section describing obsolete
13491 # non-ANSI terminal emulators later in the file.
13494 # KERMIT standard all versions.
13495 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13496 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13497 # From: greg small <gts@populi.berkeley.edu> 9-25-84
13498 kermit|standard kermit,
13501 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13502 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13503 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
13504 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13505 kermit-am|standard kermit plus auto-margin,
13507 is2=K1 Standard Kermit plus Automatic Margins\n,
13509 # IBMPC Kermit 1.2.
13510 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
13511 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
13513 # From: greg small <gts@populi.berkeley.edu> 8-30-84
13514 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
13517 clear=\EH\EJ, ed@, el@,
13518 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
13519 # IBMPC Kermit 1.20
13520 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13521 # Initialization must escape from that region by cursor position to line 24.
13522 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
13523 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
13524 # From: greg small <gts@populi.berkeley.edu> 12-19-84
13525 pckermit120|UCB IBMPC Kermit 1.20,
13527 cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, il1=\EL,
13528 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
13530 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
13531 # MS-DOS Kermit 2.27 for the IBMPC
13532 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13533 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13534 # Initialization must escape from that region by cursor position to line 24.
13535 # Does not use am: because autowrap is lost when kermit dropped and restarted.
13536 # Reverse video for standout like H19.
13537 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13538 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13539 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
13541 cols#80, it#8, lines#24,
13542 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13543 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13544 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
13545 home=\EH, ht=^I, il1=\EL,
13546 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
13547 \sIBMPC\s3-17-85\n,
13548 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
13549 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
13550 # MS-DOS Kermit 2.27 with automatic margins
13551 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13552 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
13554 cvvis=\EO\Eq\EG\EvK5,
13555 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
13556 \smargins\s3-17-85\n,
13558 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
13559 # Automatic margins now default. Use ansi <sgr> for highlights.
13560 # Define function keys.
13561 # (msk22714: removed obsolete ":kn#10:" -- esr)
13562 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13563 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
13565 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
13566 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
13567 \sIBM\sPC\s3-17-85\n,
13568 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
13569 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13570 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
13571 # This was designed for a VT320 emulator, but it is probably a good start
13572 # at support for the VT320 itself.
13573 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
13574 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
13575 vt320-k3|MS-Kermit 3.00's VT320 emulation,
13576 am, km, mir, msgr, xenl,
13577 cols#80, it#8, lines#49, pb#9600, vt#3,
13578 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13579 bel=^G, blink=\E[5m, bold=\E[1m, cmdch=\E, cr=\r, cub1=^H,
13580 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
13582 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
13584 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13585 ind=\n, is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H,
13586 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~,
13587 kf0=\E[21~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13588 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13589 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, mc0=\E[0i, mc4=\E[4i,
13590 mc5=\E[5i, nel=\r\n, rev=\E[7m, ri=\EM, rin=\E[%p1%dL,
13591 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
13592 rmso=\E[27m, rmul=\E[24m,
13593 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
13594 \E[4i\E[?4i\E[m\E[r\E[2$~,
13595 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
13596 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13597 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=ansi+csr,
13598 use=ansi+erase, use=ansi+idl, use=ansi+local, use=dec+sl,
13601 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
13602 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
13603 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
13604 vt320-k311|DEC VT320 series as defined by kermit 3.11,
13605 am, eslok, hs, mir, msgr, xenl, xon,
13606 cols#80, it#8, lines#24, vt#3,
13607 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13608 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r,
13609 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
13610 dch1=\E[P, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
13611 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
13612 hts=\EH, ich=\E[%p1%d@, il1=\E[L$<3/>, ind=\ED,
13613 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
13614 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13615 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13616 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
13617 lf3=pf3, lf4=pf4, nel=\r\ED, rev=\E[7m,
13618 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
13619 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
13620 rmul=\E[24m, rs1=\E[?3l, sgr0=\E[m, smacs=^N, smam=\E[?7h,
13621 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13622 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, use=ansi+csr,
13623 use=ansi+idl, use=ansi+local, use=vt220+cvis,
13625 ######## NON-ANSI TERMINAL EMULATIONS
13630 # These entries attempt to describe Avatar, a terminal emulation used with
13631 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
13632 # capabilities, but with cheaper (shorter) control sequences. Messy design,
13633 # excessively dependent on PC idiosyncrasies, but apparently rather popular
13634 # in the BBS world.
13636 # No color support. Avatar doesn't fit either of the Tektronix or HP color
13637 # models that terminfo knows about. An Avatar color attribute is the
13638 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
13640 # I wrote these entries while looking at the Avatar spec. I don't have
13641 # the facilities to test them. Let me know if they work, or don't.
13643 # Avatar escapes not used by these entries (because maybe you're smarter
13644 # and more motivated than I am and can figure out how to wrap terminfo
13645 # around some of them, and because they are weird enough to be funny):
13647 # ^L -- clear window/reset current attribute to default
13648 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
13650 # bit: 6 5 4 3 2 1 0
13652 # +---+---+ | +---+---+
13654 # | | foreground color
13655 # | foreground intensity
13658 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
13659 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
13660 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
13661 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
13662 # (^V^L and ^V^M set the current attribute as a side-effect.)
13663 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
13664 # in the pattern, <c> the number of times the pattern
13665 # should be repeated. If either value is 0, no-op.
13666 # The pattern can contain Avatar console codes,
13667 # including other ^V ^Y patterns.
13669 # ^V^O -- clockwise mode on; turn print direction right each time you
13670 # hit a window edge (yes, really). Turned off by CR
13672 # ^V^Q%c -- query the driver
13673 # ^V^R -- driver reset
13674 # ^V^S -- Sound tone (PC-specific)
13675 # ^V^T -- change highlight at current cursor position to %c
13676 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
13677 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
13680 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13681 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
13682 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
13683 # which is the only method that will actually work for multiple highlights.)
13685 # Update by TD - 2004: half of this was inconsistent. Found documentation
13686 # and repaired most of the damage. sgr0 is probably incorrect, but the
13687 # available documentation gives no clues for a workable string.
13688 avatar0|avatar terminal emulator level 0,
13690 cols#80, it#8, lines#25,
13691 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
13692 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
13693 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
13695 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
13696 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
13697 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
13698 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
13700 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13701 avatar0+|avatar terminal emulator level 0+,
13702 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
13703 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13704 avatar|avatar1|avatar terminal emulator level 1,
13705 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
13706 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
13710 # RBComm is a lean and mean terminal emulator written by the Interrupt List
13711 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
13712 # '90s), especially in the BBS world, and still has some loyal users due to
13713 # its very small memory footprint and to a cute macro language.
13714 rbcomm|IBM PC with RBcomm and EMACS keybindings,
13715 am, bw, mir, msgr, xenl,
13716 cols#80, it#8, lines#25,
13717 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r,
13718 cub1=^H, cud1=^C, cuf1=^B,
13719 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
13720 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
13721 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
13722 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
13723 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
13724 rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, rmir=^],
13725 rmkx=\E>, rmso=^U, rmul=^U,
13726 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sgr0=\E[m, smcup=,
13727 smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, use=ansi+csr,
13730 rbcomm-nam|IBM PC with RBcomm without autowrap,
13733 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kcub1=^H,
13734 kcud1=\n, nel=\r\n, use=rbcomm,
13735 rbcomm-w|IBM PC with RBcomm in 132 column mode,
13738 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kcub1=^H,
13739 kcud1=\n, nel=\r\n, use=rbcomm,
13741 ######## LCD DISPLAYS
13744 #### Matrix Orbital
13745 # from: Eric Z. Ayers (eric@ale.org)
13747 # Matrix Orbital 20x4 LCD display
13748 # Command Character is 0xFE (decimal 254, octal 376)
13750 # On this device, cursor addressability isn't possible. The LCD expects:
13751 # 0xfe G <col> <row>
13752 # for cup: %p1 == row and %p2 is column
13755 # cup=\376G%p2%c%p1%c
13756 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
13757 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
13759 # Alas, there is no cursor upline capability on this display.
13761 # These entries add some 'sanity stuff' to the clear function. That is, it
13762 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
13763 # and turns off the cursor blinking and stuff like that.
13765 # NOTE: calling 'beep' turns on the backlight (bell)
13766 # NOTE: calling 'flash' turns it on and back off (visual bell)
13768 MtxOrb|generic Matrix Orbital LCD display,
13769 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
13770 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
13771 flash=\376B\001$<200>\376F, home=\376H,
13772 MtxOrb204|20x4 Matrix Orbital LCD display,
13773 cols#20, lines#4, use=MtxOrb,
13774 MtxOrb162|16x2 Matrix Orbital LCD display,
13775 cols#16, lines#2, use=MtxOrb,
13778 ######## OLDER TERMINAL TYPES
13780 # This section is devoted to older commercial terminal brands that are now
13781 # discontinued, but known to be still in use or represented by emulations.
13784 #### AT&T (att, tty)
13786 # This section also includes Teletype-branded VDTs.
13788 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
13789 # Boundless Technologies); for details, see the header comment on the ADDS
13792 # These are AT&T's official terminfo entries. All-caps aliases have been
13795 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
13796 am, eo, mir, msgr, xon,
13797 cols#80, it#8, lines#24,
13798 bel=^G, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
13799 dch=\E[%p1%dP, dch1=\E[P, el1=\E[1K, home=\E[H, ht=^I,
13800 ich=\E[%p1%d@, ind=\n, kcbt=\E[Z, kclr=\E[J, kdch1=\E[P,
13801 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
13802 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
13803 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
13804 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, kich1=\E[@,
13805 kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rev=\E[7m,
13806 rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, smso=\E[7m,
13807 use=ansi+arrows, use=ansi+cpr, use=ansi+erase,
13808 use=ansi+idl, use=ansi+local,
13810 att2350|AT&T 2350 Video Information Terminal 80 column mode,
13811 mc0@, mc4@, mc5@, use=att2300,
13813 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
13814 # Seems upward compatible with VT100, plus ins/del line/char.
13815 # On sgr, the protection parameter is ignored.
13816 # No check is made to make sure that only 3 parameters are output.
13817 # standout= reverse + half-intensity = 3 | 5.
13818 # bold= reverse + underline = 2 | 3.
13819 # note that half-bright blinking doesn't look different from normal blinking.
13820 # NOTE:you must program the function keys first, label second!
13821 # (att4410: a BSD entry has been seen with the following capabilities:
13822 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
13823 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
13824 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
13825 am, hs, mir, msgr, xon,
13826 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13827 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
13829 bel=^G, bold=\E[2;7m, cr=\r, cub1=^H, cuf1=\E[C,
13830 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dim=\E[2m, dl1=\E[M,
13831 fsl=\E8, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\n,
13833 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
13834 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
13835 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
13836 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
13837 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
13838 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
13840 kclr=\E[2J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
13841 kf6=\EOU, kf7=\EOV, kf8=\EOW, kll=\E[24;1H, ll=\E[24H,
13843 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
13845 pln=\E[%p1%d;00q%p2%:-16s, ri=\EM, rmacs=^O,
13846 rs2=\Ec\E[?3l\E[2;0y,
13847 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13848 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13849 sgr0=\E[m\017, smacs=^N, tsl=\E7\E[25;%p1%{1}%+%dH,
13850 use=ansi+arrows, use=ansi+csr, use=ansi+erase,
13851 use=ansi+local1, use=ansi+sgrbold,
13853 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
13855 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
13857 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
13859 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
13862 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
13864 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
13866 # 5410 in terms of a VT100
13867 # (v5410: added <rmam>/<smam> based on init string -- esr)
13868 v5410|att5410 in terms of a VT100,
13869 am, mir, msgr, xon,
13870 cols#80, it#8, lines#24, vt#3,
13871 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13872 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13873 clear=\E[H\E[J$<50>, cr=\r, cub1=^H, cud1=\n,
13874 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13875 cuu1=\E[A$<2>, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>,
13876 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13877 ht=^I, hts=\EH, ich1=\E[@, il1=\E[L, ind=\n, kbs=^H,
13878 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13879 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13880 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13881 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13882 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
13883 %;m%?%p9%t\016%e\017%;$<2>,
13884 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13885 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13886 use=ansi+csr, use=decid+cpr, use=vt100+fnkeys,
13889 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
13890 # even! the 5420 has three modes: scroll, window or page mode
13891 # this terminfo should work in scroll or window mode, but doesn't
13892 # take advantage of any of the differences between them.
13894 # Has memory below (2 lines!)
13895 # 3 pages of memory (plus some spare)
13896 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
13897 # <hpa>, <hts> would work for these, but these work in both scroll and window
13898 # mode... Unset insert character so insert mode works
13899 # <is1> sets 80 column mode,
13900 # <is2> escape sequence:
13901 # 1) turn off all fonts
13902 # 2) function keys off, keyboard lock off, control display off,
13903 # insert mode off, erasure mode off,
13904 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
13905 # 4) reset origin mode
13906 # 5) set line wraparound
13907 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
13909 # 8) program ENTER to transmit ^J,
13910 # We use \212 to program the ^J because a bare ^J will get translated by
13911 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
13913 # <is3> set screen color to black,
13914 # No representation in terminfo for the delete word key: kdw1=\Ed
13915 # Key capabilities assume the power-up send sequence...
13916 # This <rmcup> is not strictly necessary, but it helps maximize
13917 # memory usefulness: <rmcup=\Ez>,
13918 # Alternate sgr0: <sgr0=\E[m\EW^O>,
13919 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
13920 # smkx programs the SYS PF keys to send a set sequence.
13921 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
13922 # This string causes them to send the strings <kf1>-<kf8>
13923 # when pressed in SYS PF mode.
13924 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
13925 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
13928 clear=\E[x\E[J, cnorm=\E[11;0j, cub1=^H,
13929 cup=\E[%i%p1%d;%p2%dx, cvvis=\E[11;1j,
13930 ech=\E[%p1%ds\E[%p1%dD, flash=\E[?5h$<200>\E[?5l,
13931 home=\E[x, ich1@, indn=\E[%p1%dE, is1=\E[?3l$<100>,
13932 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
13933 \E[4i\Ex\E[21;1j\212,
13934 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
13935 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
13936 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13937 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13938 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13939 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
13940 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
13941 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
13942 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
13943 rin=\E[%p1%dF, rmam=\E[?7l, rmkx=\E[19;0j\E[21;1j\212,
13945 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13946 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
13947 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[19;1j\E[21;4j\Eent,
13948 smln=\E~, tsl=\E7\E[25;%p1%{8}%+%dH, use=ansi+idc,
13949 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
13950 use=ansi+rca, use=att4410,
13952 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
13953 cols#132, lm#54, wsl#97,
13954 is1=\E[?3h$<100>, use=att4415,
13956 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
13957 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
13959 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
13960 cols#132, lm#54, wsl#97,
13961 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
13964 # Note that this mode permits programming USER PF KEYS and labels
13965 # However, when you program user pf labels you have to reselect
13966 # user pf keys to make them appear!
13967 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
13968 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
13969 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13971 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
13973 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
13974 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13977 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
13978 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13981 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
13982 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13985 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
13986 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13989 att5420_2|AT&T 5420 model 2 80 cols,
13990 am, db, hs, mir, msgr, xon,
13991 cols#80, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13992 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13993 cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, cr=\EG, cub1=^H,
13994 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
13995 cuu1=\E[1A, cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P,
13996 ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, el1=\E[1K,
13997 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
13998 hpa=\E[%p1%{1}%+%dG, ich=\E[%p1%d@, ich1=\E[@, ind=\n,
14000 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
14001 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
14003 kbeg=\Et, kcbt=\E[Z, kclr=\E[2J, kdch1=\E[P, kdl1=\E[M,
14004 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
14005 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
14006 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
14007 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
14008 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
14009 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
14010 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
14012 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, ri=\EM,
14013 rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, rmln=\E|,
14014 rs2=\Ec\E[?3l\E[2;0y,
14015 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
14016 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
14017 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
14018 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
14019 use=ansi+arrows, use=ansi+csr, use=ansi+idl,
14020 use=ansi+inittabs, use=ansi+local, use=ansi+sgrdim,
14023 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
14025 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
14026 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
14030 att4418|att5418|AT&T 5418 80 cols,
14033 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14034 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r,
14035 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[1P,
14036 dim=\E[2m, ed=\E[0J, el=\E[0K, home=\E[H, ich=\E[%p1%d@,
14037 ich1=\E[1@, il1=\E[1L, ind=\n, is1=\E[?3l,
14038 is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, kcud1=\EU,
14039 kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, kf10=\E[m,
14040 kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, kf15=\E[J,
14041 kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, kf21=\E[_,
14042 kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, kf6=\E[k,
14043 kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, rev=\E[7m,
14044 rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m\017,
14045 smacs=^N, smso=\E[7m, smul=\E[4m, use=ansi+idl,
14048 att4418-w|att5418-w|AT&T 5418 132 cols,
14050 is1=\E[?3h, use=att5418,
14052 att4420|tty4420|Teletype 4420,
14053 OTbs, da, db, eo, msgr, ul, xon,
14054 cols#80, lines#24, lm#72,
14055 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
14056 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14057 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
14058 kcbt=\EO, kclr=\EJ, kcub1=^H, kdch1=\EP, kdl1=\EM, kf0=\EU,
14059 kf3=\E@, khome=\EH, kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
14060 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
14061 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, use=vt52+arrows,
14063 # The following is a terminfo entry for the Teletype 4424
14064 # asynchronous keyboard-display terminal. It supports
14065 # the vi editor. The terminal must be set up as follows,
14067 # HIGHLIGHT DEFINITION 3-TONE
14068 # DISPLAY FUNCTION GROUP III
14070 # The second entry below provides limited (a la adm3a)
14071 # operation under GROUP II.
14073 # This must be used with DISPLAY FUNCTION GROUP I or III
14074 # and HIGHLIGHT DEFINITION 3-TONE
14075 # The terminal has either bold or blink, depending on options
14077 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
14078 att4424|tty4424|Teletype 4424,
14081 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14082 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
14083 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\EB, cuf1=\EC,
14084 cup=\E[%i%p1%d;%p2%dH, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
14085 dim=\EW, dl=\E[%p1%dM, dl1=\EM, ed=\EJ, el=\Ez, home=\E[H,
14086 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E\^, il=\E[%p1%dL,
14087 il1=\EL, ind=\n, is2=\E[20l\E[?7h, kclr=\EJ, kf1=\EOP,
14088 kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rev=\E}, ri=\ET,
14089 rmacs=\E(B, rmso=\E~, rmul=\EZ,
14090 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
14091 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
14092 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
14093 tbc=\EF, use=ansi+arrows, use=ansi+local,
14095 att4424-1|tty4424-1|Teletype 4424 in display function group I,
14096 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
14099 # This entry is not one of AT&T's official ones, it was translated from the
14100 # 4.4BSD termcap file. The highlight strings are different from att4424.
14101 # I have no idea why this is -- older firmware version, maybe?
14102 # The following two lines are the comment originally attached to the entry:
14103 # This entry appears to avoid the top line - I have no idea why.
14104 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
14105 att4424m|tty4424m|Teletype 4424M,
14107 cols#80, it#8, lines#23,
14108 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
14109 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
14110 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
14111 is2=\E[m\E[2;24r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
14112 nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
14113 smso=\E[7m, smul=\E[4m, use=ansi+arrows,
14115 # The Teletype 5425 is really version 2 of the Teletype 5420. It
14116 # is quite similar, except for some minor differences. No page
14117 # mode, for example, so all of the <cup> sequences used above have
14118 # to change back to what's being used for the 5410. Many of the
14119 # option settings have changed their numbering as well.
14121 # This has been tested on a preliminary model.
14123 # (att5425: added <rmam>/<smam> based on the init string -- esr)
14124 att5425|tty5425|att4425|AT&T 4425/5425,
14125 da, db, hs, mir, xenl, xon,
14126 lh#2, lm#78, lw#8, nlab#8, wsl#55,
14127 bold=\E[2;7m, cnorm=\E[12;0j, cub1=^H, cud1=\n,
14128 cup=\E[%i%p1%d;%p2%dH, cvvis=\E[12;1j, dch=\E[%p1%dP,
14129 dch1=\E[P, dim=\E[2m, ech=\E[%p1%ds\E[%p1%dD, el1=\E[1K,
14130 flash=\E[?5h$<200>\E[?5l, fsl=\E8, hpa=\E[%p1%{1}%+%dG,
14131 ich=\E[%p1%d@, indn=\E[%p1%dE, is1=\E<\E[?3l$<100>,
14132 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
14133 \E[4i\Ex\E[25;1j\212,
14134 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kclr=\E[J, kdch1=\E[P,
14135 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
14136 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
14137 kf8=\EOj, kich1=\E[4h, kil1=\E[L, kind=\E[T, kri=\E[S,
14138 ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, nel=\r\n,
14139 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14140 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, ri=\EM,
14141 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
14142 rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
14143 rs2=\Ec\E[?3l\E[2;0y,
14144 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14145 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
14146 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
14147 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~,
14148 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
14149 use=ansi+arrows, use=ansi+csr, use=ansi+erase,
14150 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
14151 use=ansi+sgrbold, use=decid+cpr, use=vt100+4bsd,
14153 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
14154 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
14156 att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode,
14157 cols#132, lm#54, wsl#97,
14158 is1=\E[?3h$<100>, use=tty5425,
14160 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
14161 # I also added <rmam>/<smam> -- esr)
14162 att4426|tty4426|Teletype 4426S,
14164 cols#80, lines#24, lm#48,
14165 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14166 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
14167 cr=\r, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\EP,
14168 ed=\E[J, el=\E[0K, home=\E[H, hpa=\E[%p1%dG, ht=^I, hts=\E1,
14169 ich=\E[%p1%d@, ich1=\E\^, il1=\EL, ind=\n, is1=\Ec\E[?7h,
14170 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kf1=\EOP,
14171 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
14172 kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n,
14173 rc=\E8, rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l,
14174 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
14175 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smso=\E[5m,
14176 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%dd, use=ansi+idl,
14177 use=ansi+local, use=ecma+index, use=vt52+arrows,
14179 # Terminfo entry for the AT&T 510 A Personal Terminal
14180 # Function keys 9 - 16 are available only after the
14181 # screen labeled (soft keys/action blocks) are labeled. Function key
14182 # 9 corresponds to the leftmost touch target on the screen,
14183 # function key 16 corresponds to the rightmost.
14185 # This entry is based on one done by Ernie Rice at Summit, NJ and
14186 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
14187 att510a|bct510a|AT&T 510A Personal Terminal,
14188 am, mir, msgr, xenl, xon,
14189 cols#80, lh#2, lines#24, lw#7, nlab#8,
14190 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14191 bel=^G, blink=\E[5m, bold=\E[2;7m, civis=\E[11;0|,
14192 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub1=^H,
14193 cup=\E[%i%p1%d;%p2%dH, cvvis=\E[11;2|, dch=\E[%p1%dP,
14194 dch1=\E[P, dim=\E[2m, ed=\E[0J, el=\E[0K, el1=\E[1K,
14195 enacs=\E(B\E)1, ff=^L, home=\E[H, ind=\n,
14196 is1=\E(B\E)1\E[2l, is3=\E[21;1|\212, kLFT=\E[u,
14197 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
14198 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
14199 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
14200 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
14201 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, mc0=\E[0i,
14202 mc4=\E[?8i, mc5=\E[?4i, nel=\EE, pln=\E[%p1%dp%p2%:-16s,
14203 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E[19;0|,
14204 rmso=\E[m, rmul=\E[m, sc=\E7,
14205 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14206 %|%t;7%;m%?%p9%t\016%e\017%;,
14207 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
14208 smul=\E[4m, use=ansi+cpr, use=ansi+idl, use=ansi+local,
14211 # Terminfo entry for the AT&T 510 D Personal Terminal
14212 # Function keys 9 through 16 are accessed by bringing up the
14214 # Function key 9 corresponds to the leftmost touch target on the screen,
14215 # function key 16 corresponds to the rightmost.
14217 # There are problems with soft key labeling. These are due to
14218 # strangenesses in the native terminal that are impossible to
14219 # describe in a terminfo.
14220 att510d|bct510d|AT&T 510D Personal Terminal,
14221 am, da, db, mir, msgr, xenl, xon,
14222 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
14223 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14224 bel=^G, bold=\E[2;7m, clear=\E[H\E[J, cnorm=\E[11;3|,
14225 cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH, cvvis=\E[11;2|,
14226 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ed=\E[0J, el=\E[0K,
14227 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
14228 hpa=\E[%p1%{1}%+%dG, ich=\E[%p1%d@, ind=\n,
14229 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
14230 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
14231 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
14232 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
14233 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
14234 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
14235 mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE,
14236 pln=\E[%p1%dp%p2%:-16s, rc=\E8, ri=\EM, rmacs=^O,
14237 rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmxon=\E[29;1|,
14238 rs2=\E[5;0|, sc=\E7,
14239 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14240 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14241 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
14242 smkx=\E[19;1|, smln=\E?, smxon=\E[29;0|,
14243 vpa=\E[%p1%{1}%+%dd, use=ansi+cpr, use=ansi+idl,
14244 use=ansi+local, use=ansi+rep, use=ansi+sgrbold,
14245 use=ansi+tabs, use=ecma+index,
14247 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
14248 att500|att513|AT&T 513 using page mode,
14249 am, chts, mir, msgr, xenl, xon,
14250 cols#80, lh#2, lines#24, lw#8, nlab#8,
14251 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14252 bel=^G, bold=\E[2;7m, cnorm=\E[11;0|, cr=\r,
14253 csr=%i\E[%p1%d;%p2%dr, cub1=^H, cud1=\n,
14254 cup=\E[%i%p1%d;%p2%dH, cvvis=\E[11;1|, dch=\E[%p1%dP,
14255 dch1=\E[P$<1>, dim=\E[2m, el1=\E[1K, enacs=\E(B\E)1,
14256 home=\E[H, hpa=\E[%p1%{1}%+%dG, ich=\E[%p1%d@, ind=\n,
14258 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
14259 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14260 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14261 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
14262 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
14263 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
14264 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kcan=\EOw,
14265 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
14266 kcrt=\EOn, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0,
14267 kent=\Eent, kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe,
14268 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx,
14269 khlp=\EOm, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
14270 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14271 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14272 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
14273 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
14274 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
14276 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14278 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14280 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
14281 pln=\E[%p1%dp%p2%:-16s, rc=\E8, ri=\EM, rin=\E[%p1%dF,
14282 rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|\E[21;1|\212,
14284 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
14285 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
14286 rs2=\E[5;0|, sc=\E7,
14287 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14288 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14289 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
14290 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?,
14291 vpa=\E[%p1%{1}%+%dd, use=ansi+arrows, use=ansi+erase,
14292 use=ansi+idl, use=ansi+local, use=ansi+rep,
14293 use=ansi+sgrbold, use=ansi+tabs, use=decid+cpr,
14296 # printer must be set to EMUL ANSI to accept ESC codes
14297 # <cuu1> stops at top margin
14298 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
14299 # and alt font ascii,wrap on,tabs cleared
14300 # <is2> disables newline on LF,Emphasized off
14301 # The <u0> capability sets form length
14302 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
14304 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
14305 orhi#100, orl#12, orvi#72,
14306 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
14307 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
14308 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
14311 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
14312 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
14313 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
14314 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
14315 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
14316 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
14318 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
14319 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
14320 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
14321 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
14323 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
14324 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
14325 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
14326 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
14327 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
14329 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
14330 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
14331 u0=\E[%p1%dt, vpa=\E[%p1%dd,
14333 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
14334 # The following SET-UP modes are assumed for normal operation:
14335 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
14336 # Other SET-UP modes may be set for operator convenience or communication
14337 # requirements. This termcap description is for the Resident Terminal Mode.
14338 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14339 # The BRL entry also said: UNSAFE :ll=\E[70H:
14340 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
14342 cols#88, it#8, lines#70, vt#3,
14343 bel=^G, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
14344 dch=\E[%p1%dP, dch1=\E[P, home=\E[H, ht=^I, ich=\E[%p1%d@,
14345 ich1=\E[@, ind=\n, kclr=\E[2J, kll=\E[70;1H, nel=\r\n,
14346 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ansi+arrows,
14347 use=ansi+erase, use=ansi+idl, use=ansi+local1,
14350 # 5620 terminfo (2.0 or later ROMS with char attributes)
14351 # The following SET-UP modes are assumed for normal operation:
14352 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
14353 # Other SET-UP modes may be set for operator convenience or communication
14354 # requirements. This termcap description is for Resident Terminal Mode. No
14355 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14356 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
14357 # Be aware that older versions of the dmd have a firmware bug that affects
14358 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
14359 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
14360 # also has <ll>=\E[70H commented out and marked unsafe.
14361 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
14362 att5620|dmd|tty5620|ttydmd|5620|AT&T 5620 terminal 88 columns,
14363 OTbs, am, msgr, npc, xon,
14364 cols#88, it#8, lines#70,
14365 bel=^G, bold=\E[2m, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
14366 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, home=\E[H, ht=^I,
14367 ich=\E[%p1%d@, ich1=\E[@, ind=\E[S, kclr=\E[2J,
14368 kll=\E[70;1H, nel=\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
14369 rev=\E[7m, ri=\E[T, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
14370 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
14371 use=ansi+erase, use=ansi+idl, use=ansi+local1,
14374 att5620-24|tty5620-24|dmd-24|Teletype dmd 5620 in a 24x80 layer,
14375 lines#24, use=att5620,
14376 att5620-34|tty5620-34|dmd-34|Teletype dmd 5620 in a 34x80 layer,
14377 lines#34, use=att5620,
14378 # 5620 layer running the "S" system's downloaded graphics handler:
14379 att5620-s|tty5620-s|layer|vitty|AT&T 5620 S layer,
14381 cols#80, it#8, lines#72,
14382 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
14383 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
14384 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kclr=\E[2J,
14385 khome=\E[H, kll=\E[70;1H, use=ansi+arrows,
14387 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
14389 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
14390 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
14391 att605|AT&T 605 80 column 102key keyboard,
14393 cols#80, lines#24, lw#8, nlab#8, wsl#80,
14394 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14395 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, cr=\r, cub1=^H,
14396 cup=\E[%i%p1%d;%p2%dH, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
14397 el1=\E[1K, fsl=\E8, ht=^I, il1=\E[L, ind=\n, invis=\E[8m,
14398 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
14399 kLFT=\E[ A, kRIT=\E[ @, kcbt=\E[Z, kclr=\E[2J, kdch1=\E[P,
14400 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14401 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
14402 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
14403 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
14404 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
14405 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
14406 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
14407 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
14408 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
14409 kf7=\EOi, kf8=\EOj, kf9=\ENo, kich1=\E[@, kil1=\E[L,
14410 kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, mc4=\E[?4i,
14411 mc5=\E[?5i, nel=\EE,
14412 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14413 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14414 rmacs=^O, rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l,
14415 sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, smln=\E[p,
14416 smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
14417 use=ansi+arrows, use=ansi+cpr, use=ansi+erase,
14418 use=ansi+idc, use=ansi+local1,
14420 att605-pc|AT&T 605 in pc term mode,
14421 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
14423 cub1=\E[D, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
14424 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
14425 kf9=\E[U, knp=\E[G, kpp=\E[I, rmsc=\E[50;0|$<400>,
14426 smsc=\E[?11l\E[50;1|$<250>, xoffc=g, xonc=e, use=att605,
14427 att605-w|AT&T 605-w 132 column 102 key keyboard,
14429 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
14430 # (att610: I added <rmam>/<smam> based on the init string. I also
14431 # added <indn> and <rin> because the BSD file says the att615s have them,
14432 # and the 615 is like a 610 with a big keyboard, and most of their other
14433 # smart terminals support the same sequence -- esr)
14434 att610|AT&T 610; 80 column; 98key keyboard,
14435 am, eslok, hs, mir, msgr, xenl, xon,
14436 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14437 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14438 bel=^G, cbt=\E[Z, cr=\r, cub1=^H, cvvis=\E[?12;25h,
14439 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, el1=\E[1K,
14440 flash=\E[?5h$<200>\E[?5l, fsl=\E8, ht=^I, ich=\E[%p1%d@,
14442 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
14443 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A,
14444 kcbt=\E[Z, kclr=\E[2J, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14445 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe,
14446 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo,
14447 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
14449 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14450 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, ri=\EM, rmacs=^O,
14451 rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p, rs2=\Ec\E[?3l,
14452 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14453 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14454 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14455 smln=\E[p, tsl=\E7\E[25;%i%p1%dx, use=ansi+arrows,
14456 use=ansi+csr, use=ansi+cup, use=ansi+erase, use=ansi+idl,
14457 use=ansi+local, use=ansi+sgrbold, use=decid+cpr,
14458 use=ecma+index, use=att610+cvis,
14460 att610-w|AT&T 610; 132 column; 98key keyboard,
14462 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14465 att610-103k|AT&T 610; 80 column; 103key keyboard,
14466 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14467 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14468 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14469 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14470 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14471 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14472 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14473 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
14474 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
14475 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
14476 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
14477 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
14478 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
14479 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
14481 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14483 att615|AT&T 615; 80 column; 98key keyboard,
14484 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14485 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14486 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14487 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14488 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14489 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14490 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
14491 att615-w|AT&T 615; 132 column; 98key keyboard,
14492 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14493 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14494 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14495 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14496 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14497 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14498 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
14499 att615-103k|AT&T 615; 80 column; 103key keyboard,
14500 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
14501 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
14502 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
14503 # (att620: I added <rmam>/<smam> based on the init string and
14504 # <rin>/<indn> from a BSD termcap -- esr)
14505 att620|AT&T 620; 80 column; 98key keyboard,
14506 am, eslok, hs, mir, msgr, xenl, xon,
14507 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14508 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14509 bel=^G, cbt=\E[Z, cr=\r, cub1=^H, cvvis=\E[?12;25h,
14510 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, el1=\E[1K,
14511 flash=\E[?5h$<200>\E[?5l, fsl=\E8, ht=^I, ich=\E[%p1%d@,
14513 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
14514 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @,
14515 kcbt=\E[Z, kclr=\E[2J, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14516 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
14517 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
14518 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
14519 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
14520 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
14521 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
14522 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
14523 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
14524 kf7=\EOi, kf8=\EOj, kf9=\ENo, kind=\E[S, kri=\E[T, ll=\E[24H,
14525 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14526 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14527 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, ri=\EM,
14528 rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
14530 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14531 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
14532 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
14533 smir=\E[4h, smln=\E[p, tsl=\E7\E[25;%i%p1%dx,
14534 use=ansi+arrows, use=ansi+csr, use=ansi+cup,
14535 use=ansi+erase, use=ansi+idl, use=ansi+local,
14536 use=ansi+sgrbold, use=decid+cpr, use=ecma+index,
14539 att620-w|AT&T 620; 132 column; 98key keyboard,
14541 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14543 att620-103k|AT&T 620; 80 column; 103key keyboard,
14544 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14545 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14546 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14547 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14548 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14549 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14550 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14551 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
14552 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
14553 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
14554 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
14555 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
14556 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14557 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14558 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
14559 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
14561 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
14563 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14566 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
14567 # The following SETUP modes are assumed for normal operation:
14568 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
14569 # Font_Size=Large Non-Layers_Window_Cols=80
14570 # Non-Layers_Window_Rows=60
14571 # Other SETUP modes may be set for operator convenience or communication
14572 # requirements. Some capabilities assume a printer attached to the Aux EIA
14573 # port. This termcap description is for the Fixed Non-Layers Window. No
14574 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14575 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
14576 att630|AT&T 630 windowing terminal,
14577 OTbs, am, da, db, mir, msgr, npc, xon,
14578 cols#80, it#8, lines#60, lm#0,
14579 bel=^G, blink=\E[5m, cbt=\E[Z, cr=\r, cub1=^H,
14580 cup=\E[%i%p1%d;%p2%dH, dim=\E[2m, el1=\E[1K, home=\E[H,
14581 ht=^I, ind=\ED, is2=\E[m, kcbt=\E[Z, kclr=\E[2J, kdch1=\E[P,
14582 kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14583 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
14584 kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, kf22=\EN|,
14585 kf23=\EN}, kf24=\EN~, kf9=\ENo, kich1=\E[@, kil1=\E[L,
14586 mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
14587 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
14588 rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
14589 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
14591 sgr0=\E[m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
14592 use=ansi+cpr, use=ansi+erase, use=ansi+idc, use=ansi+idl,
14593 use=ansi+local, use=ecma+index,
14595 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
14596 lines#24, use=att630,
14598 # This is the att700 entry for 700 native emulation of the AT&T 700
14599 # terminal. Comments are relative to changes from the 605V2 entry and
14600 # att730 on which the entry is based. Comments show the terminfo
14601 # capability name, termcap name, and description.
14603 # Here is what's going onm in the init string:
14604 # ESC [ 50;4| set 700 native mode (really is 605)
14605 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
14606 # ESC [ 53;0| set GenFlow to Xon/Xoff
14607 # ESC [ 8 ;0| set CR on NL
14608 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
14609 # ESC [ ? 4 l jump scroll
14610 # ESC [ ? 5 l/h video: normal (l); reverse (h)
14611 # ESC [ ?13 l Labels on
14612 # ESC [ ?15 l parity check = no
14613 # ESC [ 13 l monitor mode off
14614 # ESC [ 20 l LF on NL (not CRLF on NL)
14615 # ESC [ ? 7 h autowrap on
14616 # ESC [ 12 h local echo off
14617 # ESC ( B GO = ASCII
14618 # ESC ) 0 G1 = Special Char & Line Drawing
14619 # ESC [ ? 31 l Set 7 bit controls
14621 # Note: Most terminals, especially the 600 family use Reverse Video for
14622 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
14623 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
14624 # standout mode with \E[m (all normal attributes). The 730 entry simply
14625 # exits reverse video which would leave other current attributes intact. It
14626 # was assumed the 730 entry to be more correct so rmso has changed. The
14627 # 605V2 has no sequences to turn individual attributes off, thus its setting
14628 # and the rmso/smso settings from the 730.
14630 # Note: For the same reason as above in rmso I changed exit under-score mode
14631 # to specifically turn off underscore, rather than return to all normal
14634 # Note: The following pkey_xmit is taken from the 605V2 which contained the
14635 # capability as pfxl. It was changed here to pfx since pfxl
14636 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
14637 # allows strings to be parameters and label values must be programmed as
14638 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
14639 # and strings to be parameters. The 605V2 pfx entry should be examined later
14640 # in this regard. For reference the 730 pfxl entry is shown here for comparison
14642 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
14643 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14646 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14649 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14651 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
14655 # modular 10 pin Connector
14656 # Left side Right side
14657 # Pin 1 2 3 4 5 6 7 8 9 10
14659 # Key (notch) at bottom
14671 # The manual is 189 pages and is loaded with details about the escape codes,
14672 # etc..... Available from AT&T CIC 800-432-6600...
14673 # ask for Document number 999-300-660..
14675 att700|AT&T 700 24x80 column display w/102key keyboard,
14676 am, eslok, hs, mir, msgr, xenl, xon,
14677 cols#80, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14678 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14679 bel=^G, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
14680 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14681 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l,
14682 fln=4\,4, fsl=\E8, home=\E[H, ich=\E[%p1%d@, ind=\ED,
14683 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
14684 \E(B\E)0\E[?31l\E[0m\017,
14685 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kcbt=\E[Z,
14686 kclr=\E[2J, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc,
14687 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
14688 kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG,
14689 kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO,
14690 kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT,
14691 kf29=\EOq, kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt,
14692 kf33=\EOu, kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy,
14693 kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq,
14694 kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
14695 kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kich1=\E[@,
14696 kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, nel=\EE,
14697 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
14698 \s\s\s\s\s\s%;%p2%s,
14699 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, ri=\EM, rmacs=^O,
14700 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
14701 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
14702 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14703 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14704 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p,
14705 smxon=\E[53;0|, tsl=\E7\E[99;%i%p1%dx, use=ansi+arrows,
14706 use=ansi+csr, use=ansi+erase, use=ansi+idl,
14707 use=ansi+inittabs, use=ansi+local, use=ansi+rep,
14708 use=ansi+sgrbold, use=decid+cpr, use=dec+pp,
14711 # This entry was modified 3/13/90 by JWE.
14712 # fixes include additions of <enacs>, correcting <rep>, and modification
14713 # of <kHOM>. (See comments below)
14714 # att730 has status line of 80 chars
14715 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
14716 # the <kf25> and up keys are used for shifted system Fkeys
14717 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
14718 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
14719 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
14720 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
14721 # 102, 102+1, or 122 key keyboards
14723 # (att730: I added <rmam>/<smam> based on the init string -- esr)
14724 att730|AT&T 730 windowing terminal,
14725 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
14726 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
14727 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14728 bel=^G, cbt=\E[Z, cr=\r, cub1=^H, dch=\E[%p1%dP, dch1=\E[P,
14729 dim=\E[2m, el1=\E[1K, enacs=\E(B\E)0,
14730 flash=\E[?5h$<200>\E[?5l, fsl=\E8, ht=^I, ich=\E[%p1%d@,
14732 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
14733 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A,
14734 kcbt=\E[Z, kclr=\E[2J, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14735 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
14736 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz,
14737 kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC,
14738 kf26=\EOD, kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe,
14739 kf30=\EOH, kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP,
14740 kf35=\ENQ, kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU,
14741 kf4=\EOf, kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY,
14742 kf44=\EOZ, kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^,
14743 kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kich1=\E[@,
14744 kil1=\E[L, kind=\E[S, kri=\E[T, mc0=\E[?19h\E[0i, nel=\EE,
14745 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
14746 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14747 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
14748 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, ri=\EM, rmacs=^O,
14749 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
14750 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
14751 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14752 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14753 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14754 smln=\E[?13l, smxon=\E[?21h, swidm=\E#6,
14755 tsl=\E7\E[;%i%p1%dx, use=ansi+arrows, use=ansi+csr,
14756 use=ansi+cup, use=ansi+erase, use=ansi+idl,
14757 use=ansi+local, use=ansi+rep, use=ansi+sgrbold,
14758 use=decid+cpr, use=dec+pp, use=att610+cvis,
14760 # "MGT" is "Multi-Tasking Graphics Terminal"
14761 att730-41|730MTG-41|AT&T 730-41 windowing terminal,
14762 lines#41, use=att730,
14763 att730-24|730MTG-24|AT&T 730-24 windowing terminal,
14764 lines#24, use=att730,
14765 att730r|730MTGr|AT&T 730 rev video windowing terminal,
14766 flash=\E[?5l$<200>\E[?5h,
14767 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
14768 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal,
14769 lines#41, use=att730r,
14770 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal,
14771 lines#24, use=att730r,
14773 # The following represents the screen layout along with the associated
14774 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
14775 # not appear on the screen but are shown to reference the bezel buttons.
14776 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
14777 # position relative to the screen.
14781 # +----------------------------------------------------------------+
14783 # XXXX | kf0 kf24 | XXXX
14786 # XXXX | kf1 kf23 | XXXX
14789 # XXXX | kf2 kf22 | XXXX
14792 # XXXX | kf3 kf21 | XXXX
14795 # XXXX | kf4 kf20 | XXXX
14798 # XXXX | kf5 kf19 | XXXX
14801 # XXXX | kf6 kf18 | XXXX
14807 # +----------------------------------------------------------------+
14809 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
14811 # Note: XXXX represents the screen buttons
14817 # The character string sent by key 'kf26' may be user programmable
14818 # to send either \E[16s, or \E[26s.
14819 # The character string sent by key 'krfr' may be user programmable
14820 # to send either \E[17s, or \E[27s.
14822 # Depression of the "CMD" key sends \E! (kcmd)
14823 # Depression of the "MAIL" key sends \E[26s (kf26)
14824 # "REDRAW" same as "REFRESH" (krfr)
14826 # "kf" functions adds carriage return to output string if terminal is in
14829 # The following are functions not covered in the table above:
14831 # Set keyboard character (SKC): \EPn1;Pn2w
14832 # Pn1= 0 Back Space key
14834 # Pn2= Program char (hex)
14836 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
14837 # Pn1= Window number (1-39)
14838 # Pn2-Pn5= Y;X;Y;X coordinates
14840 # Screen Selection (SSL): \E[Pnu
14841 # Pn= Window number
14843 # Set Terminal Modes (SM): \E[Pnh
14844 # Pn= 3 Graphics mode
14845 # Pn= > Cursor blink
14846 # Pn= < Enter new line mode
14847 # Pn= = Enter reverse insert/replace mode
14848 # Pn= ? Enter no scroll mode
14850 # Reset Terminal Mode (RM): \E[Pnl
14851 # Pn= 3 Exit graphics mode
14852 # Pn= > Exit cursor blink
14853 # Pn= < Exit new line mode
14854 # Pn= = Exit reverse insert/replace mode
14855 # Pn= ? Exit no scroll mode
14857 # Screen Status Report (SSR): \E[Pnp
14858 # Pn= 0 Request current window number
14859 # Pn= 1 Request current window dimensions
14861 # Device Status Report (DSR): \E[6n Request cursor position
14863 # Call Status Report (CSR): \E[Pnv
14864 # Pn= 0 Call failed
14865 # Pn= 1 Call successful
14867 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
14868 # Pn1= Button number to be loaded
14869 # Pn2= Character count of "string"
14870 # Pn3= Key mode being loaded:
14874 # String= Text string (15 chars max)
14876 # Screen Number Report (SNR): \E[Pnp
14877 # Pn= Screen number
14879 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
14880 # Pn1= Number of rows available in window
14881 # Pn2= Number of columns available in window
14883 # Cursor Position Report (CPR): \E[Pn1;Pn2R
14884 # Pn1= "Y" Position of cursor
14885 # Pn2= "X" Position of cursor
14887 # Request Answer Back (RAB): \E[c
14889 # Answer Back Response (ABR): \E[?;*;30;VSV
14890 # *= 0 No printer available
14891 # *= 2 Printer available
14892 # V= Software version number
14893 # SV= Software sub version number
14894 # (printer-available field not documented in v1)
14896 # Screen Alignment Aid: \En
14898 # Bell (lower pitch): \E[x
14900 # Dial Phone Number: \EPdstring\
14901 # string= Phone number to be dialed
14903 # Set Phone Labels: \EPpstring\
14904 # string= Label for phone buttons
14906 # Set Clock: \EPchour;minute;second\
14908 # Position Clock: \EPsY;X\
14909 # Y= "Y" coordinate
14910 # X= "X" coordinate
14912 # Delete Clock: \Epr\
14914 # Programming The Function Buttons: \EPfPn;string\
14915 # Pn= Button number (00-06, 18-24)
14916 # (kf00-kf06, kf18-kf24)
14917 # string= Text to sent on button depression
14919 # The following in version 2 only:
14921 # Request For Local Directory Data: \EPp12;\
14923 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
14925 # Request for Local Directory Data in print format: \EPp13;\
14927 # Enable 'Prt on Line' mode: \022 (DC2)
14929 # Disable 'Prt on Line' mode: \024 (DC4)
14933 # The following Terminfo entry describes functions which are supported by
14934 # the AT&T 5430/pt505 terminal software version 2 and later.
14935 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
14937 cols#80, it#8, lines#24,
14938 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14939 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
14940 cnorm=\E[>l, cr=\r, cup=\E[%p1%d;%p2%dH, cvvis=\E[>h,
14941 dch=\E[%p1%dP, dch1=\E[P, ed=\E[0J, el=\E[0K, el1=\E[2K,
14942 home=\E[H, ht=^I, ind=\n,
14943 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
14944 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14945 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
14946 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
14947 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
14948 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
14949 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
14950 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
14951 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
14952 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
14953 use=ansi+cpr, use=ansi+idl, use=ansi+local,
14955 # The following Terminfo entry describes functions which are supported by
14956 # the AT&T 5430/pt505 terminal software version 1.
14957 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
14959 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
14960 att505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
14961 lines#22, use=att505,
14963 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
14964 # This cut mark helps make life less painful for people running ncurses tic
14965 # on machines with relatively little RAM. The file can be broken in half here
14966 # cleanly and compiled in sections -- no `use' references cross this cut
14970 #### Ampex (Dialogue)
14972 # Yes, these are the same people who are better-known for making audio- and
14973 # videotape. I'm told they are located in Redwood City, CA.
14976 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
14977 # (ampex80: some capabilities merged in from SCO's entry -- esr)
14978 ampex80|a80|d80|dialogue|dialogue80|Ampex dialogue 80,
14980 cols#80, it#8, lines#24,
14981 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
14982 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14983 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
14984 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
14985 smso=\Ej, smul=\El, tbc=\E3,
14986 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
14987 ampex175|Ampex d175,
14990 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14991 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14992 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
14993 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
14994 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
14995 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
14996 # No backspace key in the main QWERTY cluster. Fortunately, it has a
14997 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
14998 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
14999 # mode), this key can be used as the erase key; I find I like this. Because
15000 # some people and some systems may not, there is another termcap ("ampex175")
15001 # that suppresses this little eccentricity by omitting the relevant capability.
15002 ampex175-b|Ampex d175 using left arrow for erase,
15003 kbs=^_, use=ampex175,
15004 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
15005 # (ampex210: removed obsolete ":kn#10:" -- esr)
15006 ampex210|a210|Ampex a210,
15007 OTbs, am, hs, xenl,
15008 cols#80, it#8, lines#24, xmc#1,
15009 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
15010 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15011 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
15012 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
15013 if=/usr/share/tabset/std, il1=\EE, invis@,
15014 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
15015 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
15016 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
15017 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
15018 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
15019 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
15020 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
15021 # and moved the padding to be *after* the caps -- esr)
15022 ampex219|ampex-219|amp219|Ampex with automargins,
15024 cols#80, it#8, lines#24,
15025 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
15026 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
15027 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
15028 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
15029 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
15030 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
15031 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15032 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
15033 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
15034 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
15035 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
15036 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
15037 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
15038 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
15040 cud1=\n, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
15042 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
15043 ampex232|ampex-232|Ampex Model 232,
15045 cols#80, lines#24, xmc#1,
15046 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
15047 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15048 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
15049 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
15050 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
15051 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
15052 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
15053 kf9=^AI\r, khome=^^, use=adm+sgr,
15054 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
15055 ampex232w|Ampex Model 232 / 132 columns,
15057 is2=\E\034Eg\El, use=ampex232,
15059 #### Ann Arbor (aa)
15061 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
15062 # numbers of function keys. At least some used monitors in portrait mode,
15063 # allowing up to 76-character screen heights! They were reachable at:
15065 # Ann Arbor Terminals
15066 # 6175 Jackson Road
15067 # Ann Arbor, MI 48103
15070 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
15071 # can't be found on the Web; I fear they're long dead. R.I.P.
15075 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
15076 # Highly modified 6/22 by Mike O'Brien.
15077 # split out into several for the various screen sizes by dave-yost@rand
15078 # Modifications made 3/82 by Mark Horton
15079 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
15080 # status line moved to top of screen, <flash> removed 5/82
15081 # Some unknown person at SCO then hacked the init strings to make them more
15084 # assumes the following setup:
15085 # A menu: 0000 1010 0001 0000
15086 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15087 # C menu: 56 66 0 0 9600 0110 1100
15088 # D menu: 0110 1001 1 0
15090 # Briefly, the settings are for the following modes:
15091 # (values are for bit set/clear with * indicating our preference
15092 # and the value used to test these termcaps)
15093 # Note that many of these settings are irrelevant to the terminfo
15094 # and are just set to the default mode of the terminal as shipped
15097 # A menu: 0000 1010 0001 0000
15098 # Block/underline cursor*
15099 # blinking/nonblinking cursor*
15100 # key click/no key click*
15101 # bell/no bell at column 72*
15103 # key pad is cursor control*/key pad is numeric
15104 # return and line feed/return for <cr> key *
15105 # repeat after .5 sec*/no repeat
15106 # repeat at 25/15 chars per sec. *
15108 # hold data until pause pressed/process data unless pause pressed*
15109 # slow scroll/no slow scroll*
15110 # Hold in area/don't hold in area*
15111 # functions keys have default*/function keys disabled on powerup
15113 # show/don't show position of cursor during page transmit*
15118 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15119 # Baud rate (9600*)
15121 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
15122 # 1 stop bit*/2 stop bits
15123 # parity error detection off*/on
15125 # keyboard local/on line*
15126 # half/full duplex*
15127 # disable/do not disable keyboard after data transmission*
15129 # transmit entire page/stop transmission at cursor*
15130 # transfer/do not transfer protected characters*
15131 # transmit all characters/transmit only selected characters*
15132 # transmit all selected areas/transmit only 1 selected area*
15134 # transmit/do not transmit line separators to host*
15135 # transmit/do not transmit page tab stops tabs to host*
15136 # transmit/do not transmit column tab stop tabs to host*
15137 # transmit/do not transmit graphics control (underline,inverse..)*
15139 # enable*/disable auto XON/XOFF control
15140 # require/do not require receipt of a DC1 from host after each LF*
15141 # pause key acts as a meta key/pause key is pause*
15149 # XON character (17*)
15150 # XOFF character (19*)
15152 # C menu: 56 66 0 0 9600 0110 1100
15153 # number of lines to print data on (printer) (56*)
15155 # number of lines on a sheet of paper (printer) (66*)
15157 # left margin (printer) (0*)
15159 # number of pad chars on new line to printer (0*)
15161 # printer baud rate (9600*)
15163 # printer parity: 00=odd,01=even*,10=space,11=mark
15164 # printer stop bits: 2*/1
15165 # print/do not print guarded areas*
15167 # new line is: 01=LF,10=CR,11=CRLF*
15171 # D menu: 0110 1001 1 0
15172 # LF is newline/LF is down one line, same column*
15173 # wrap to preceding line if move left from col 1*/don't wrap
15174 # wrap to next line if move right from col 80*/don't wrap
15175 # backspace is/is not destructive*
15177 # display*/ignore DEL character
15178 # display will not/will scroll*
15179 # page/column tab stops*
15180 # erase everything*/erase unprotected only
15182 # editing extent: 0=display,1=line*,2=field,3=area
15187 annarbor4080|aa4080|Ann Arbor 4080,
15190 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
15191 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
15192 %{12}%+%;%{64}%+%c,
15193 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
15194 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
15196 # Strange Ann Arbor terminal from BRL
15197 aas1901|Ann Arbor K4080 w/S1901 mod,
15200 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
15201 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
15204 # If you're using the GNU termcap library, add
15205 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
15206 # to these capabilities. This is the nonstandard GNU termcap scrolling
15207 # capability, arguments are:
15208 # 1. Total number of lines on the screen.
15209 # 2. Number of lines above desired scroll region.
15210 # 3. Number of lines below (outside of) desired scroll region.
15211 # 4. Total number of lines on the screen, the same as the first parameter.
15212 # The generic Ann Arbor entry is the only one that uses this.
15213 aaa+unk|aaa-unk|Ann Arbor Ambassador (internal - don't use this directly),
15214 OTbs, am, km, mc5i, mir, xon,
15216 bel=^G, clear=\E[H\E[J$<156>, cr=\r, cub1=^H, cud1=^K,
15217 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P, ed=\E[J,
15218 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG,
15219 ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il1=\E[L$<3>, ind=^K,
15220 is1=\E[m\E7\E[H\E9\E8,
15221 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kcbt=\E[Z, kclr=\E[J,
15222 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
15223 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
15224 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
15225 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
15226 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
15227 kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, mc4=^C,
15228 mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
15229 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
15231 rmm=\E[>52l, sc=\E7,
15232 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15235 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
15237 smm=\E[>52h, vpa=\E[%p1%{1}%+%dd, use=ansi+arrows,
15238 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
15239 use=ansi+rep, use=ansi+sgrbold,
15241 aaa+rv|Ann Arbor Ambassador in reverse video,
15242 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
15243 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15244 rs1=\E[H\E[7m\E[J$<156>,
15245 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7
15246 ;%;%?%p7%t8;%;m\016,
15247 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
15248 # Ambassador with the DEC option, for partial VT100 compatibility.
15249 aaa+dec|Ann Arbor Ambassador in DEC VT100 mode,
15250 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
15251 csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O,
15252 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
15253 %p7%t8;%;m%?%p9%t\016%e\017%;,
15255 aaa-18|Ann Arbor Ambassador/18 lines,
15257 is2=\E7\E[60;0;0;18p\E8,
15258 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
15260 aaa-18-rv|Ann Arbor Ambassador/18 lines+reverse video,
15261 use=aaa+rv, use=aaa-18,
15262 aaa-20|Ann Arbor Ambassador/20 lines,
15264 is2=\E7\E[60;0;0;20p\E8,
15265 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
15267 aaa-22|Ann Arbor Ambassador/22 lines,
15269 is2=\E7\E[60;0;0;22p\E8,
15270 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
15272 aaa-24|Ann Arbor Ambassador/24 lines,
15274 is2=\E7\E[60;0;0;24p\E8,
15275 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
15277 aaa-24-rv|Ann Arbor Ambassador/24 lines+reverse video,
15278 use=aaa+rv, use=aaa-24,
15279 aaa-26|Ann Arbor Ambassador/26 lines,
15281 is2=\E7\E[60;0;0;26p\E8,
15282 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
15283 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
15284 aaa-28|Ann Arbor Ambassador/28 lines,
15286 is2=\E7\E[60;0;0;28p\E8,
15287 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
15288 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
15289 aaa-30-s|aaa-s|Ann Arbor Ambassador/30 lines w/status,
15292 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15293 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
15294 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
15295 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
15296 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15297 aaa-30-s-rv|aaa-s-rv|Ann Arbor Ambassador/30 lines+status+reverse video,
15298 use=aaa+rv, use=aaa-30-s,
15299 aaa-s-ctxt|aaa-30-s-ctxt|Ann Arbor Ambassador/30 lines+status+save context,
15300 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15301 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
15302 aaa-s-rv-ctxt|aaa-30-s-rv-ct|Ann Arbor Ambassador/30 lines+status+save context+reverse video,
15303 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15304 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
15305 aaa|aaa-30|ambas|ambassador|Ann Arbor Ambassador/30 lines,
15307 is2=\E7\E[60;0;0;30p\E8,
15308 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
15309 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
15310 aaa-30-rv|aaa-rv|Ann Arbor Ambassador/30 lines in reverse video,
15311 use=aaa+rv, use=aaa-30,
15312 aaa-30-ctxt|aaa-ctxt|Ann Arbor Ambassador/30 lines; saving context,
15313 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15315 aaa-30-rv-ctxt|aaa-rv-ctxt|Ann Arbor Ambassador/30 lines reverse video; saving context,
15316 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15317 use=aaa+rv, use=aaa-30,
15318 aaa-36|Ann Arbor Ambassador/36 lines,
15320 is2=\E7\E[60;0;0;36p\E8,
15321 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
15322 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
15323 aaa-36-rv|Ann Arbor Ambassador/36 lines+reverse video,
15324 use=aaa+rv, use=aaa-36,
15325 aaa-40|Ann Arbor Ambassador/40 lines,
15327 is2=\E7\E[60;0;0;40p\E8,
15328 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
15329 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
15330 aaa-40-rv|Ann Arbor Ambassador/40 lines+reverse video,
15331 use=aaa+rv, use=aaa-40,
15332 aaa-48|Ann Arbor Ambassador/48 lines,
15334 is2=\E7\E[60;0;0;48p\E8,
15335 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
15336 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
15337 aaa-48-rv|Ann Arbor Ambassador/48 lines+reverse video,
15338 use=aaa+rv, use=aaa-48,
15339 aaa-60-s|Ann Arbor Ambassador/59 lines+status,
15342 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15343 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
15344 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15345 aaa-60-s-rv|Ann Arbor Ambassador/59 lines+status+reverse video,
15346 use=aaa+rv, use=aaa-60-s,
15347 aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video,
15348 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
15349 aaa-60|Ann Arbor Ambassador/60 lines,
15351 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
15353 aaa-60-rv|Ann Arbor Ambassador/60 lines+reverse video,
15354 use=aaa+rv, use=aaa-60,
15355 aaa-db|Ann Arbor Ambassador 30/destructive backspace,
15357 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
15359 guru|guru-33|guru+unk|Ann Arbor guru/33 lines 80 cols,
15361 flash=\E[>59h$<100>\E[>59l,
15362 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
15363 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
15364 guru+rv|guru changes for reverse video,
15365 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
15366 guru-rv|guru-33-rv|Ann Arbor guru/33 lines+reverse video,
15367 use=guru+rv, use=guru-33,
15368 guru+s|guru status line,
15370 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
15371 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
15372 tsl=\E[>51h\E[1;%p1%dH\E[2K,
15373 guru-nctxt|guru with no saved context,
15374 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
15375 guru-s|guru-33-s|Ann Arbor guru/33 lines+status,
15377 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
15378 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15379 guru-24|Ann Arbor guru 24 lines,
15381 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
15383 guru-44|Ann Arbor guru 44 lines,
15385 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
15387 guru-44-s|Ann Arbor guru/44 lines+status,
15389 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
15390 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15391 guru-76|guru with 76 lines by 89 cols,
15393 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
15395 guru-76-s|Ann Arbor guru/76 lines+status,
15397 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
15398 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15399 guru-76-lp|guru-lp|guru with page bigger than line printer,
15400 cols#134, lines#76,
15401 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
15403 guru-76-w|guru 76 lines by 178 cols,
15404 cols#178, lines#76,
15405 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
15407 guru-76-w-s|Ann Arbor guru/76 lines+status+wide,
15408 cols#178, lines#75,
15409 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
15410 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15411 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
15412 cols#178, lines#76,
15413 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
15415 aaa-rv-unk|Ann Arbor unknown type,
15416 lh#0, lw#0, nlab#0,
15417 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
15418 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15420 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
15422 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
15424 #### Applied Digital Data Systems (adds)
15426 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
15427 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
15428 # terminals was merged again. Then AT&T sold the terminal business to
15429 # SunRiver, which later changed its name to Boundless Technologies. The
15430 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
15431 # as of early 1995) are at:
15433 # Boundless Technologies
15434 # 100 Marcus Boulevard
15435 # Hauppauge, NY 11788-3762
15436 # Vox: (800)-231-5445
15437 # Fax: (516)-342-7378
15438 # Web: http://boundless.com
15440 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
15441 # In 1995 Boundless acquired DEC's terminals business.
15444 # Regent: lowest common denominator, works on all regents.
15445 # (regent: renamed ":bc:" to ":le:" -- esr)
15446 regent|ADDS Regent Series,
15449 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
15450 home=\EY\s\s, ind=\n, ll=^A,
15451 # Regent 100 has a bug where if computer sends escape when user is holding
15452 # down shift key it gets confused, so we avoid escape.
15453 regent100|ADDS Regent 100,
15456 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15457 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
15458 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
15459 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
15460 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
15461 regent20|ADDS Regent 20,
15462 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
15464 regent25|ADDS Regent 25,
15465 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
15467 regent40|ADDS Regent 40,
15469 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
15470 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15471 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
15472 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
15473 smul=\E0`, use=regent25,
15474 regent40+|ADDS Regent 40+,
15475 is2=\EB, use=regent40,
15476 # It uses a different code for mapping acs vs dim/blink.
15477 regent60|regent200|adds200|ADDS Regent 60,
15478 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
15479 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
15480 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
15481 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
15482 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
15484 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
15485 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
15486 viewpoint|addsviewpoint|ADDS Viewpoint,
15489 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
15490 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15491 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
15492 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
15493 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
15494 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
15495 # Some viewpoints have bad ROMs that foo up on ^O
15496 screwpoint|ADDS Viewpoint with ^O bug,
15497 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
15499 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
15500 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
15501 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
15502 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
15503 # invis=01000100 and %c is the logical or of desired attributes.
15504 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
15506 # Update by TD - 2004:
15508 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
15510 # COMMANDS ASCII CODE
15512 # Address, Absolute ESC,=,row,column
15514 # Aux Port Enable ESC,@
15515 # Aux Port Disable ESC,A
15519 # Cursor forward FF
15522 # Cursor suppress ETB
15523 # Cursor enable CAN
15524 # Erase to end of line ESC,T
15525 # Erase to end of page ESC,Y
15528 # Keyboard unlock SO
15529 # Read current cursor position ESC,?
15530 # Set Attribute ESC,0,x (see below for values of x)
15531 # Tag bit reset ESC,(
15532 # Tag bit set ESC,)
15533 # Transparent Print on ESC,3
15534 # Transparent Print off ESC,4
15540 # Half Intensity A 0101
15542 # Half Intensity Blinking C 0103
15543 # Reverse Video P 0120
15544 # Reverse Video Half Intensity Q 0121
15545 # Reverse Video Blinking R 0122
15546 # Reverse Video Half Intensity
15548 # Underlined ` 0140
15549 # Underlined Half Intensity a 0141
15550 # Underlined Blinking b 0142
15551 # Underlined Half Intensity
15553 # Video suppress D 0104
15554 vp3a+|viewpoint3a+|ADDS Viewpoint 3a+,
15556 cols#80, it#8, lines#24,
15557 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
15558 cub1=^H, cud1=\n, cuf1=^L,
15559 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
15560 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
15561 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
15562 nel=\r\n, rev=\E0P\E), rmso=\E(,
15563 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
15564 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
15565 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
15566 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
15567 vp60|viewpoint60|addsvp60|ADDS Viewpoint60,
15570 # adds viewpoint 90 - from cornell
15571 # Note: emacs sends ei occasionally to insure the terminal is out of
15572 # insert mode. This unfortunately puts the viewpoint90 IN insert
15573 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
15574 # - :ei=:im=: must be present in the termcap translation.)
15575 # - <xhp> indicates glitch that attributes stick to location
15576 # - <msgr> means it's safe to move in standout mode
15577 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
15579 # Function key and label capabilities merged in from SCO.
15580 vp90|viewpoint90|ADDS Viewpoint 90,
15581 OTbs, bw, msgr, xhp,
15583 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
15584 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
15585 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
15586 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
15587 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
15588 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
15589 kf7=^B8\r, kf8=^B9\r, kf9=^B:\r, khome=^A, lf0=F1, lf1=F2,
15590 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
15591 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
15592 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
15593 # Note: if return acts weird on a980, check internal switch #2
15594 # on the top chip on the CONTROL pc board.
15595 adds980|a980|ADDS Consul 980,
15598 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
15599 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
15600 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
15601 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
15602 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
15604 #### C. Itoh Electronics
15606 # As of 1995 these people no longer make terminals (they're still in the
15607 # printer business). Their terminals were all clones of the DEC VT series.
15608 # They're located in Orange County, CA.
15611 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
15612 # the delay times and do an auto tab set rather than the indirect
15613 # file used in vt100.
15614 cit80|cit-80|citoh 80,
15617 clear=\E[H\EJ, cr=\r, cub1=^H, cup=\E[%i%p1%2d;%p2%2dH,
15618 ed=\EJ, el=\EK, ff=^L, ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB,
15619 kcuf1=\EOC, kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
15622 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
15623 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
15624 cit101|citc|C. Itoh fast VT100,
15627 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H,
15628 cup=\E[%i%p1%d;%p2%dH, cvvis=\E7\E[U, dch1=\E[P,
15629 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l,
15630 ich1=\E[@, il1=\E[L,
15631 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
15632 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15633 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15634 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
15635 smul=\E[4m, use=ansi+local1,
15637 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
15638 # The following termcap entry was created from the Callan cd100 entry. The
15639 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
15640 # full selection of combinations of reverse video, underline, and blink.
15641 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
15642 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
15643 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
15644 cit101e|C. Itoh CIT-101e,
15645 OTbs, OTpt, am, mir, msgr,
15646 cols#80, it#8, lines#24,
15647 acsc=, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
15648 cup=\E[%i%p1%2d;%p2%2dH, cvvis=\E[?1l\E[?4l\E[?7h,
15649 dch1=\E[P, dl1=\E[M, if=/usr/share/tabset/vt100,
15650 il1=\E[L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15651 kf0=\EOT, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm,
15652 kf6=\EOl, kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O,
15653 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N,
15654 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
15655 use=ansi+erase, use=ansi+local1,
15657 # From: David S. Lawyer, June 1997:
15658 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
15659 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
15660 # late 1980's CIT Terminals went out of business.
15661 # There is no need to use the initialization string is=... (by invoking
15662 # tset or setterm etc.) provided that the terminal has been manually set
15663 # up (and the setup saved with ^S) to be compatible with this termcap. To be
15664 # compatible it should be in ANSI mode (not VT52). A set-up that
15665 # works is to set all the manually settable stuff to factory defaults
15666 # by pressing ^D in set-up mode. Then increase the brightness with the
15667 # up-arrow key since the factory default will likely be dim on an old
15668 # terminal. Then change any options you want (provided that they are
15669 # compatible with the termcap). For my terminal I set: Screen
15670 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
15671 # on. I also set up mine for parity (but you may not need it). Then
15672 # save the setup with ^S.
15673 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
15674 cit101e-rv|C. Itoh CIT-101e (sets reverse video),
15675 am, eo, mir, msgr, xenl, xon,
15677 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[1v,
15678 cnorm=\E[0;3;4v, cr=\r, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
15679 cvvis=\E[3;5v, flash=\E[?5l$<200/>\E[?5h, home=\E[H,
15680 hpa=\E[%i%p1%dG, ind=\n,
15681 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
15682 B\E[m\E[20l\E[1;24r\E[24;1H,
15683 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15684 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rev=\E[7m,
15685 ri=\EM, rmcup=, rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g,
15686 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smso=\E[7m,
15687 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u8=\E[?6c,
15688 use=ansi+enq, use=ansi+csr, use=ansi+erase, use=ansi+idc,
15689 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
15692 cit101e-n|CIT-101e w/o am,
15694 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15696 cit101e-132|CIT-101e with 132 cols,
15698 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
15699 cit101e-n132|CIT-101e with 132 cols w/o am,
15702 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15704 # CIE Terminals CIT-500 from BRL
15705 # The following SET-UP modes are assumed for normal operation:
15706 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
15707 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
15708 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
15709 # Other SET-UP modes may be set for operator convenience or communication
15711 # Hardware tabs are assumed to be set every 8 columns; they can be set up
15712 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
15713 # "stty ixon -ixany" to enable DC3/DC1 flow control!
15714 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
15715 cit500|CIE Terminals CIT-500,
15716 OTbs, OTpt, mir, msgr, xon,
15717 OTkn#10, cols#80, lines#64, vt#3,
15718 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
15719 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
15720 dch1=\E[P, ed=\EJ, el=\EK, home=\E[H, ind=\n, is2=\E<\E)0,
15721 kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, ked=\EJ, kel=\EK, kf0=\EOP,
15722 kf1=\EOQ, kf2=\EOR, kf3=\EOS, kf4=\EOU, kf5=\EOV, kf6=\EOW,
15723 kf7=\EOX, kf8=\EOY, kf9=\EOZ, khome=\E[H, kich1=\E[4h,
15724 kil1=\E[L, krmir=\E[4l, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4,
15725 lf4=F15, lf5=F16, lf6=F17, lf7=F18, lf8=F19, lf9=F20,
15726 ll=\E[64H, nel=\EE, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
15727 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15728 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
15729 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
15730 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15731 use=ansi+apparrows, use=ansi+csr, use=ansi+idl,
15732 use=ansi+inittabs, use=ansi+local,
15734 # C. Itoh printers begin here
15735 citoh|ci8510|8510|C. Itoh 8510a,
15738 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
15739 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
15741 citoh-pica|citoh in pica,
15742 is1=\EN, use=citoh,
15743 citoh-elite|citoh in elite,
15746 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15749 citoh-comp|citoh in compressed,
15752 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15753 \,097\,105\,113\,121\,129.,
15755 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
15756 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
15758 is1=\EP, use=citoh,
15759 citoh-6lpi|citoh in 6 lines per inch mode,
15760 is3=\EA, use=citoh,
15761 citoh-8lpi|citoh in 8 lines per inch mode,
15763 is3=\EB, use=citoh,
15765 #### Control Data (cdc)
15768 cdc456|CDC 456 terminal,
15771 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15772 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
15773 el=^V, home=^Y, il1=\EL, ind=\n,
15775 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
15779 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15780 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15781 kcuu1=^W, khome=^Y,
15782 cdc721ll|CDC Viking with long lines,
15784 cols#132, lines#24,
15785 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15786 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15787 kcuu1=^W, khome=^Y,
15788 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
15792 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15793 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
15794 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
15796 # The following switch/key settings are assumed for normal operation:
15797 # 96 chars SCROLL FULL duplex not BLOCK
15798 # Other switches may be set according to communication requirements.
15799 # Insert/delete-character cannot be used, as the whole display is affected.
15800 # "so" & "se" are commented out until jove handles "sg" correctly.
15803 OTkn#10, cols#80, lines#24,
15804 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15805 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
15806 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
15807 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
15808 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
15809 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
15810 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
15811 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
15814 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
15816 # Part of the long initialization string defines the "DOWN" key to the left
15817 # of the tab key to send an ESC. The real ESC key is positioned way out
15820 # The termcap won't work in 132 column mode due to the way it it moves the
15821 # cursor. Termcap doesn't have the capability (as far as I could tell) to
15822 # handle the 721 in 132 column mode.
15824 # (cdc721: changed :ri: to :sr: -- esr)
15825 cdc721-esc|Control Data 721,
15826 OTbs, OTpt, am, bw, msgr, xon,
15827 OTkn#10, cols#80, it#8, lines#30,
15828 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
15829 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
15830 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
15831 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
15832 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
15833 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
15834 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
15836 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
15837 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
15838 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
15839 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
15840 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
15845 # Getronics is a Dutch electronics company that at one time was called
15846 # `Geveke' and made async terminals; but (according to the company itself!)
15847 # they've lost all their documentation on the command set. The hardware
15848 # documentation suggests the terminals were actually manufactured by a
15849 # Taiwanese electronics company named Cal-Comp. There are known
15850 # to have been at least two models, the 33 and the 50.
15853 # The 50 seems to be a top end VT220 clone, with the addition of a higher
15854 # screen resolution, a larger screen, at least 1 page of memory above and
15855 # below the screen, apparently pages of memory right and left of the screen
15856 # which can be panned, and about 75 function keys (15 function keys x normal,
15857 # shift, control, func A, func B). It also has more setup possibilities than
15858 # the VT220. The monitor case is dated November 1978 and the keyboard case is
15861 # The VT100 emulation works as is. The entry below describes the rather
15862 # non-conformant (but more featureful) ANSI mode.
15864 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
15865 visa50|Geveke VISA 50 terminal in ANSI 80 character mode,
15868 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
15869 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
15870 csr=\E[%i%p1%d;%p2%dr, cup=\E[%i%p1%d;%p2%dH,
15871 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, ed=\E[J, el=\E[K,
15872 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
15873 ht=^I, ind=\n, invis=\E[8m,
15874 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
15875 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kc1=\EOR, kc3=\EOS, kdch1=^?,
15876 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
15877 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
15878 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
15879 lf3=A insert line, lf4=A delete line, lf5=A clear,
15880 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
15881 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
15882 rmam=\E[?7l, rmkx=\E>, rmso=\E[0;2m, rmul=\E[0m,
15883 sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, smkx=\E=,
15884 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
15885 use=ansi+arrows, use=ansi+idc, use=ansi+idl,
15888 #### Human Designed Systems (Concept)
15890 # Human Designed Systems
15892 # King of Prussia, PA 19406
15893 # Vox: (610)-277-8300
15894 # Fax: (610)-275-5739
15895 # Net: support@hds.com
15897 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
15898 # the character-terminal business now (1995) and making X terminals. In
15899 # particular, the whole `Concept' line described here was discontinued long
15903 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
15904 # Extensive changes to c108 by arpavax:eric Feb 1982
15905 # Some unknown person at SCO then translated it to terminfo.
15907 # There seem to be a number of different versions of the C108 PROMS
15908 # (with bug fixes in its Z-80 program).
15910 # The first one that we had would lock out the keyboard of you
15911 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
15912 # Try that on your C108 and see if it sends a ^S when you type it.
15913 # If so, you have an old version of the PROMs.
15915 # You should configure the C108 to send ^S/^Q before running this.
15916 # It is much faster (at 9600 baud) than the c100 because the delays
15918 # new status line display entries for c108-8p:
15919 # <is3> - init str #3 - setup term for status display -
15920 # set programmer mode, select window 2, define window at last
15921 # line of memory, set bkgnd stat mesg there, select window 0.
15923 # <tsl> - to status line - select window 2, home cursor, erase to
15924 # end-of-window, 1/2 bright on, goto(line#0, col#?)
15926 # <fsl> - from status line - 1/2 bright off, select window 0
15928 # <dsl> - disable status display - set bkgnd status mesg with
15931 # There are probably more function keys that should be added but
15932 # I don't know what they are.
15934 # No delays needed on c108 because of ^S/^Q handshaking
15936 c108|concept108|c108-8p|concept108-8p|Concept 108 w/8 pages,
15937 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
15939 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
15940 c108-4p|concept108-4p|Concept 108 w/4 pages,
15943 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
15944 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
15945 %>%t\001%{96}%-%;%{32}%+%c,
15946 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
15948 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
15949 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
15950 smcup=\EU\Ev 8p\Ep\r\E\025,
15951 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
15952 c108-rv|c108-rv-8p|Concept 108 w/8 pages in reverse video,
15953 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
15955 c108-rv-4p|concept108rv4p|Concept 108 w/4 pages in reverse video,
15956 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
15958 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode,
15960 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
15961 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
15964 # These have only window relative cursor addressing, not screen
15965 # relative. To get it to work right here, smcup/rmcup (which
15966 # were invented for the concept) lock you into a one page
15967 # window for screen style programs.
15969 # To get out of the one page window, we use a clever trick:
15970 # we set the window size to zero ("\Ev " in rmcup) which the
15971 # terminal recognizes as an error and resets the window to all
15974 # This trick works on c100 but does not on c108, sigh.
15976 # Some tty drivers use cr3 for concept, others use nl3, hence
15977 # the delays on cr and ind below. This padding is only needed at
15978 # 9600 baud and up. One or the other is commented out depending on
15979 # local conventions.
15981 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
15982 # less than 6 but more than 2 will work.
15984 # Note: can't use function keys f7-f10 because they are
15985 # indistinguishable from arrow keys (!), also, del char and
15986 # clear eol use xon/xoff so they probably won't work very well.
15988 # Also note that we don't define insrt/del char/delline/eop/send
15989 # because they don't transmit unless we reset them - I figured
15990 # it was a bad idea to clobber their definitions.
15992 # The <mc5> sequence changes the escape character to ^^ so that
15993 # escapes will be passed through to the printer. Only trouble
15994 # is that ^^ won't be - ^^ was chosen to be unlikely.
15995 # Unfortunately, if you're sending raster bits through to be
15996 # plotted, any character you choose will be likely, so we lose.
15998 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
15999 # cannot be # in is2 because it will hang a c100 with no printer
16001 c100|concept100|concept|c104|c100-4p|HDS Concept 100,
16002 OTbs, am, eo, mir, ul, xenl,
16003 cols#80, lines#24, pb#9600, vt#8,
16004 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
16005 cub1=^H, cud1=\n, cuf1=\E=,
16006 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
16007 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
16008 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
16009 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
16011 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
16012 \010A@\s\E4#:"\E:a\E4#;"\E:b\E4#<"\E:c,
16013 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
16014 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
16015 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
16016 kf4=\E8, kf5=\E9, kf6=\E:a, kf7=\E:b, kf8=\E:c, khome=\E?,
16017 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
16018 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
16019 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
16020 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
16021 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
16022 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
16023 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
16024 smso=\ED, smul=\EG,
16025 c100-rv|c100-rv-4p|concept100-rv|Concept 100 reverse video,
16026 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
16027 smso=\EE, use=c100,
16028 oc100|oconcept|c100-1p|old 1-page Concept 100,
16032 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
16033 # Lots of notes, originally inline, but ncurses doesn't grok that.
16035 # am: not available in power on mode, but turned on with \E[=107;207h in
16036 # is2=. Also, \E=124l in is2= could have been used to prevent needing
16037 # to specify xenl:, but that would have rendered the last space on the
16038 # last line useless.
16039 # bw: Not available in power on mode, but turned on with \E[=107;207h in
16041 # clear: Could be done with \E[2J alone, except that vi (and probably most
16042 # other programs) assume that this also homes the cursor.
16043 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
16044 # scroll the window, and go back to window 1.
16045 # is2: the string may cause a warning to be issued by tic that it
16046 # found a very long line and that it suspects that a comma is missing
16047 # somewhere. This warning can be ignored (unless it comes up more than
16048 # once). The initialization string contains the following commands:
16050 # [Setup mode items changed from factory defaults:]
16051 # \E)0 set alternate character set to
16053 # ^O set character set to default
16054 # [In case it wasn't]
16055 # \E[m turn off all attributes
16056 # [In case they weren't off]
16057 # \E[=107; cursor wrap and
16058 # 207h character wrap on
16059 # \E[90;3u set Fkey definitions to "transmit"
16061 # \E[92;3u set cursor key definitions to
16062 # "transmit" defaults
16063 # \E[43;1u set shift F13 to transmit...
16065 # \E[44;1u set shift F14 to transmit...
16067 # \E[45;1u set shift F15 to transmit...
16069 # \E[46;1u set shift F16 to transmit...
16071 # \E[200;1u set shift up to transmit...
16073 # \E[201;1u set shift down to transmit...
16075 # \E[202;1u set shift right to transmit...
16077 # \E[203;1u set shift left to transmit...
16079 # \E[204;1u set shift home to transmit...
16081 # \E[212;1u set backtab to transmit...
16083 # \E[213;1u set shift backspace to transmit...
16085 # \E[214;1u set shift del to transmit...
16087 # [Necessary items not mentioned in setup mode:]
16088 # \E[2!w move to window 2
16089 # \E[25;25w define window as line 25 of memory
16090 # \E[!w move to window 1
16091 # \E[2*w show current line of window 2 as
16093 # \E[2+x set meta key to use high bit
16094 # \E[;3+} move underline to bottom of character
16096 # All Fkeys are set to their default transmit definitions with \E[90;3u
16097 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
16098 # setting MUST be redefined or deactivated, because the default is
16099 # contained in almost all of this terminal's Fkey strings! If for some
16100 # reason "quit" cannot be altered, the Fkeys can, but it would be
16101 # necessary to change ^| to ^] in all of these definitions, and add
16102 # \E[2;029!t to is2.
16103 # lines: is set to 24 because this terminal refuses to treat the 25th
16105 # ll: Not available in power on mode, but turned on with \E[=107;207h in
16107 # lm: Pointless, given that this definition locks a single screen of
16108 # memory into view, but what the hey...
16109 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
16110 # other attributes alone), but some programs expect this to turn off
16112 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
16113 # attributes alone), but some programs expect this to turn off
16115 # sgr: Attributes are set on this terminal with the string \E[ followed by
16116 # a list of attribute code numbers (in decimal, separated by
16117 # semicolons), followed by the character m. The attribute code
16120 # 2 for dim (which is ignored in power on mode);
16124 # 8 for not displayable; and
16125 # =99 for protected (except that there are strange side
16126 # effects to protected characters which make them inadvisable).
16127 # The mapping of terminfo parameters to attributes is as follows:
16128 # %p1 (standout) = bold and inverse together;
16129 # %p2 (underline) = underline;
16130 # %p3 (reverse) = inverse;
16131 # %p4 (blink) = blinking;
16132 # %p5 (dim) is ignored;
16133 # %p6 (bold) = bold;
16134 # %p7 (invisible) = not displayable;
16135 # %p8 (protected) is ignored; and
16136 # %p9 (alt char set) = alt char set.
16137 # The code to do this is:
16139 # %?%p1%p6%O IF (standout; bold) OR
16140 # %t;1 THEN OUTPUT ;1
16142 # %?%p2 IF underline
16143 # %t;4 THEN OUTPUT ;4
16146 # %t;5 THEN OUTPUT ;5
16148 # %?%p1%p3%O IF (standout; reverse) OR
16149 # %t;7 THEN OUTPUT ;7
16151 # %?%p7 IF invisible
16152 # %t;8 THEN OUTPUT ;8
16155 # %?%p9 IF altcharset
16156 # %t^N THEN OUTPUT ^N
16157 # %e^O ELSE OUTPUT ^O
16159 # sgr0: Everything is turned off (including alternate character set), since
16160 # there is no way of knowing what it is that the program wants turned
16162 # smul: The "underline" attribute is reconfigurable to an overline or
16163 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
16164 # bottom of the character cell. This was done to allow for more readable
16165 # underlined characters, and to be able to distinguish between an
16166 # underlined space, an underscore, and an underlined underscore.
16167 # xenl: Terminal can be configured to not need this, but this "glitch"
16168 # behavior is actually preferable with autowrap terminals.
16170 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
16171 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
16172 # string modifies the 'O' in kf43 to kf46 to a '$'.
16174 # kcbt was originally ^I but redefined in is2=.
16175 # kHOM was \E[H originally but redefined in is2=, as were a number of
16177 # kDC was originally \177 but redefined in is2=.
16179 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
16180 # tsl: Go to window 2, then do an hpa=.
16182 #------- flash=\E[8;3!}^G\E[3;3!}
16183 #------- flash=\E[?5h$<100>\E[?5l
16184 # There are two ways to flash the screen, both of which have their drawbacks.
16185 # The first is to set the bell mode to video, transmit a bell character, and
16186 # set the bell mode back - but to what? There is no way of knowing what the
16187 # user's old bell setting was before we messed with it. Worse, the command to
16188 # set the bell mode also sets the key click volume, and there is no way to say
16189 # "leave that alone", or to know what it's set to, either.
16190 # The second way to do a flash is to set the screen to inverse video, pad for a
16191 # tenth of a second, and set it back - but like before, there's no way to know
16192 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
16193 # it that way. The point is moot anyway, since vi (and probably other
16194 # programs) assume that by defining flash=, you want the computer to use it
16195 # INSTEAD of bel=, rather than as a secondary type of signal.
16197 #------- cvvis=\E[+{
16198 # The is the power on setting, which is also as visible as the cursor
16200 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
16201 # Windowing is possible, but not defined here because it is also used to
16202 # emulate status line functions. Allowing a program to set a window could
16203 # clobber the status line or render it unusable. There is additional memory,
16204 # but screen scroll functions are destructive and do not make use of it.
16206 #------- dim= Not available in power on mode.
16207 # You have a choice of defining low intensity characters as "half bright" and
16208 # high intensity as "normal", or defining low as "normal" and high as "bold".
16209 # No matter which you choose, only one of either "half bright" or "bold" is
16210 # available at any time, so taking the time to override the default is
16213 #------- prot=\E[=0;99m
16214 # Not defined, because it appears to have some strange side effects.
16215 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16216 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16217 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
16218 # Available, but making them available to programs is inadvisable.
16219 # The code to do this is:
16220 # %?%p1%{24}%< IF ((key; 24) <;
16221 # %p1%{30}%> ((key; 30) >;
16222 # %p1%{54}%< (key; 54) <
16225 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
16226 # %t\E[ THEN OUTPUT \E[
16227 # %p1%d OUTPUT (key) as decimal
16228 # [next line applies to pfx only]
16232 # %p2%s OUTPUT (string) as string
16234 # [DEL chosen as delimiter, but could be any character]
16235 # [implied: ELSE do nothing]
16239 # Not defined since anything it might do could be done faster and easier with
16240 # either Meta-Shift-Reset or the main power switch.
16242 #------- smkx=\E[1!z
16243 #------- rmkx=\E[!z
16244 # These sequences apply to the cursor and setup keys only, not to the
16245 # numeric keypad. But it doesn't matter anyway, since making these
16246 # available to programs is inadvisable.
16247 # For the key definitions below, all sequences beginning with \E$ are
16248 # custom and programmed into the terminal via is2. \E$ also has no
16249 # meaning to any other terminal.
16251 #------- cmdch=\E[;%p1%d!t
16252 # Available, but making it available to programs is inadvisable.
16253 #------- smxon=\E[1*q
16254 # Available, but making it available to programs is inadvisable.
16255 # Terminal will send XON/XOFF on buffer overflow.
16256 #------- rmxon=\E[*q
16257 # Available, but making it available to programs is inadvisable.
16258 # Terminal will not notify on buffer overflow.
16259 #------- smm=\E[2+x
16261 # Available, but making them available to programs is inadvisable.
16264 # It's not made clear in the manuals, but based on other ansi/vt type
16265 # terminals, it's a good guess that this terminal is capable of both
16266 # "transparent print" (which doesn't copy data to the screen, and
16267 # therefore needs mc5i: specified to say so) and "auxiliary print"
16268 # (which does duplicate printed data on the screen, in which case mc4=
16269 # and mc5= should use the \E[?4i and \E[?5i strings instead).
16271 hds200|Human Designed Systems HDS200,
16272 am, bw, eslok, hs, km, mir, msgr, xenl, xon, NQ,
16273 cols#80, lines#24, lm#0,
16274 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16275 blink=\E[0;5m, bold=\E[0;1m, civis=\E[6+{, cnorm=\E[+{,
16276 cr=\r, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
16277 dsl=\E[2!w\r\n\E[!w, el1=\E[1K, fsl=\E[!w, home=\E[H,
16278 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ind=\ED, invis=\E[0;8m,
16279 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
16280 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
16281 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
16282 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
16283 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
16284 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
16285 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kcbt=\E$I,
16286 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
16287 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
16288 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
16289 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
16290 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
16291 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
16292 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
16293 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
16294 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
16295 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
16296 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
16297 kf8=^\008\r, kf9=^\009\r, kind=\E[T, knp=\E[U, kpp=\E[V,
16298 kri=\E[S, ll=\E[H\E[A, nel=\E[E, rev=\E[0;7m, ri=\EM,
16299 rmacs=^O, rmir=\E[4l, rmso=\E[m\017, rmul=\E[m\017,
16300 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
16301 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
16302 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
16303 smul=\E[0;4m, tsl=\E[2!w\E[%i%p1%dG, vpa=\E[%i%p1%dd,
16304 use=ansi+arrows, use=ansi+csr, use=ansi+erase,
16305 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
16308 # <ht> through <el> included to specify padding needed in raw mode.
16309 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
16310 avt-ns|Concept AVT no status line,
16311 OTbs, am, eo, mir, ul, xenl, xon,
16312 cols#80, lines#24, lm#192,
16313 acsc=, bel=^G, clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
16314 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, cvvis=\E[=119h,
16315 dim=\E[1!{, dl=\E[%p1%dM$<4*>, dl1=\E[M$<4>,
16316 ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
16317 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, ich=\E[%p1%d@,
16318 il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, ip=$<4>,
16319 is1=\E[=103l\E[=205l,
16320 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
16321 \E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27
16323 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16324 kf4=\EOS, kich1=\E\001\r, kil1=\E\003\r, ll=\E[24H,
16325 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
16326 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
16327 prot=\E[99m, ri=\EM$<4>, rmacs=\016$<1>,
16328 rmcup=\E[w\E2\r\n, rmkx=\E[!z\E[0;2u, rmso=\E[7!{,
16330 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
16331 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
16333 sgr0=\E[m\016$<1>, smacs=\017$<1>,
16334 smcup=\E[=4l\E[1;24w\E2\r, smkx=\E[1!z\E[0;3u,
16335 vpa=\E[%p1%{1}%+%dd, use=ansi+arrows, use=ansi+csr,
16336 use=ansi+idc1, use=ansi+inittabs, use=ansi+local,
16337 use=ansi+rep, use=ansi+sgrbold,
16339 avt-rv-ns|Concept AVT in reverse video mode/no status line,
16340 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16342 avt-w-ns|Concept AVT in 132 column mode/no status line,
16343 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16345 avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video,
16346 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16347 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
16349 # Concept AVT with status line. We get the status line using the
16350 # "Background status line" feature of the terminal. We swipe the
16351 # first line of memory in window 2 for the status line, keeping
16352 # 191 lines of memory and 24 screen lines for regular use.
16353 # The first line is used instead of the last so that this works
16354 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
16355 # assumes an 8 page AVT but lm isn't currently used anywhere.)
16357 avt+s|Concept AVT status line changes,
16360 dsl=\E[0*w, fsl=\E[1;1!w,
16361 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
16362 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
16363 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
16364 avt|avt-s|concept-avt|Concept AVT w/80 columns,
16365 use=avt+s, use=avt-ns,
16366 avt-rv|avt-rv-s|Concept AVT reverse video w/sl,
16367 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16368 use=avt+s, use=avt-ns,
16369 avt-w|avt-w-s|Concept AVT 132 cols+status,
16370 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16371 use=avt+s, use=avt-ns,
16372 avt-w-rv|avt-w-rv-s|Concept AVT wide+status+rv,
16373 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16374 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
16376 #### Contel Business Systems.
16379 # Contel c300 and c320 terminals.
16380 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
16382 cols#80, lines#24, xmc#1,
16383 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16384 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16385 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16386 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16387 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
16388 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16389 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16390 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
16391 # Contel c301 and c321 terminals.
16392 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
16393 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
16396 #### Data General (dg)
16398 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
16399 # the terminals group at Data General was shut down in 1991; all these
16400 # terminals have thus been discontinued.
16402 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
16403 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
16404 # sequentially, first the unmodified key codes are listed as F1 through F15.
16405 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
16406 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
16407 # F46 through F60. This is done in the private "includes" below whose names
16408 # start with "dgkeys+".
16410 # DG terminals generally support 8 bit characters. For each of these terminals
16411 # two descriptions are supplied:
16412 # 1) A default description for 8 bits/character communications, which
16413 # uses the default DG international character set and keyboard codes.
16414 # 2) A description with suffix "-7b" for 7 bits/character communications.
16415 # This description must use the NON-DEFAULT native keyboard language.
16417 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
16418 # Ctrl/Shift fdkeys (kf34-kf44).
16420 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
16421 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
16422 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16423 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
16424 kf11=\233011z, kf12=\233012z, kf13=\233013z,
16425 kf14=\233014z, kf15=\233000z, kf16=\233101z,
16426 kf17=\233102z, kf18=\233103z, kf19=\233104z,
16427 kf2=\233002z, kf20=\233105z, kf21=\233106z,
16428 kf22=\233107z, kf23=\233108z, kf24=\233109z,
16429 kf25=\233110z, kf26=\233111z, kf27=\233112z,
16430 kf28=\233113z, kf29=\233114z, kf3=\233003z,
16431 kf30=\233100z, kf31=\233201z, kf32=\233202z,
16432 kf33=\233203z, kf34=\233204z, kf35=\233205z,
16433 kf36=\233206z, kf37=\233207z, kf38=\233208z,
16434 kf39=\233209z, kf4=\233004z, kf40=\233210z,
16435 kf41=\233211z, kf42=\233212z, kf43=\233213z,
16436 kf44=\233214z, kf45=\233200z, kf46=\233301z,
16437 kf47=\233302z, kf48=\233303z, kf49=\233304z,
16438 kf5=\233005z, kf50=\233305z, kf51=\233306z,
16439 kf52=\233307z, kf53=\233308z, kf54=\233309z,
16440 kf55=\233310z, kf56=\233311z, kf57=\233312z,
16441 kf58=\233313z, kf59=\233314z, kf6=\233006z,
16442 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
16443 khome=\233H, kprt=\233i,
16445 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
16446 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
16447 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16448 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
16449 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
16450 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
16451 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
16452 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
16453 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
16454 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
16455 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
16456 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
16457 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
16458 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
16459 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
16460 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
16461 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
16462 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
16463 kf9=\E[009z, khome=\E[H, kprt=\E[i,
16465 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
16466 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
16467 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
16468 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
16469 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
16470 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
16471 kf31=^^9, kf32=^^:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
16472 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
16473 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
16474 kf8=^^x, kf9=^^y, khome=^H,
16476 dgkeys+15|Private entry describing 15 DG mode special keys,
16477 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
16478 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
16479 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
16480 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
16481 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
16482 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
16483 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^:,
16484 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
16485 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
16486 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
16487 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
16490 # Data General color terminals use the "Tektronix" color model. The total
16491 # number of colors varies with the terminal model, as does support for
16492 # attributes used in conjunction with color.
16494 # Removed u7, u8 definitions since they conflict with tack:
16495 # Preserve user-defined colors in at least some cases.
16497 # Default is ACM mode.
16498 # u8=^^F}20^^Fi^^F}21,
16500 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
16501 ncv#53, use=dgmode+color,
16503 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
16506 # Video attributes are coordinated using static variables set by "sgr", then
16507 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
16508 # (D=dim, U=underline, B=blink, R=reverse.)
16509 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
16511 colors#8, ncv#16, pairs#64,
16512 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
16513 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16514 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16515 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16516 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16517 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16518 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16520 dg+color|Color info for Data General D470C terminals in ANSI mode,
16521 colors#16, ncv#53, pairs#0x100,
16522 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16523 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16525 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16526 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16528 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16529 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16531 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16532 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16536 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
16538 colors#8, ncv#16, pairs#64,
16540 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16542 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16544 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16546 dgmode+color|Color info for Data General D470C terminals in DG mode,
16547 colors#16, pairs#0x100,
16548 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16549 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16550 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16551 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16554 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
16556 colors#52, ncv#53, pairs#26,
16557 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
16558 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
16559 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
16561 oc=\036RG01A00FF00000000\036RG01B00000000FF00
16562 \036RG01C007F00000000\036RG01D000000007F00,
16563 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
16564 scp=\036RG2%p1%02X,
16566 # Colors are in the order: normal, reverse, dim, dim + reverse.
16567 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
16569 colors#52, ncv#53, pairs#26,
16570 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
16571 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
16572 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
16573 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
16574 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
16575 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
16576 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
16577 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
16578 oc=\036RG01:00??00000000\036RG01;00000000??00\036RG01<007?00
16579 000000\036RG01=000000007?00,
16580 op=\036RF4831:\036RF2>31;\036RF1=31<\036RF3?31=,
16581 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
16583 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
16584 # Initialization string 1 sets:
16585 # ^R - vertical scrolling enabled
16586 # ^C - blinking enabled
16587 dg-generic|generic Data General terminal in DG mode,
16590 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16591 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
16592 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
16593 smul=^T, use=dgkeys+11,
16595 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
16596 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
16597 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
16598 # maybe they were originally nuls (which would fit).
16600 dg200|Data General DASHER 200,
16603 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16604 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
16605 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
16606 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
16607 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
16610 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
16611 dg210|dg-ansi|Data General 210/211,
16614 OTnl=\E[B, clear=\E[2J, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
16615 el=\E[K, home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16616 kcuu1=\E[A, khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m,
16617 rmul=\E[0;m, smso=\E[7;m, smul=\E[4;m, use=ansi+local1,
16619 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
16620 # courtesy of Carlos Rucalde of Vantage Software, Inc.
16621 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
16622 # I suspect the d200 function keys actually work on the dg211, check it out.)
16623 dg211|Data General d211,
16624 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
16625 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
16626 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
16628 # dg450 from Cornell (not official)
16629 dg450|dg6134|Data General 6134,
16630 cub1@, cuf1=^X, use=dg200,
16633 # Note: lesser Dasher terminals will not work with vi because vi insists upon
16634 # having a command to move straight down from any position on the bottom line
16635 # and scroll the screen up, or a direct vertical scroll command. The 460 and
16636 # above have both, the D210/211, for instance, has neither. We must use ANSI
16637 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
16638 # backspace on all terminals. This is not so in DG mode.
16639 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
16640 # grounds that there is no matching ":ml:"
16641 dg460-ansi|Data General Dasher 460 in ANSI-mode,
16642 OTbs, am, msgr, ul,
16643 cols#80, it#8, lines#24,
16644 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H,
16645 cup=\E[%i%p1%2d;%p2%2dH, dch1=\E[P, dim=\E[2m, dl1=\E[M,
16646 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
16647 ind=\E[S, is2=^^F@, kbs=\E[D, kf0=\E[001z, kf1=\E[002z,
16648 kf2=\E[003z, kf3=\E[004z, kf4=\E[005z, kf5=\E[006z,
16649 kf6=\E[007z, kf7=\E[008z, kf8=\E[009z, kf9=\E[00:z, lf0=f1,
16650 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
16651 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
16652 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
16654 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u8=\E[5n, u9=\E[0n,
16655 use=ansi+arrows, use=ansi+cpr, use=ansi+local1,
16657 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
16658 # Data General 605x
16659 # Ought to work for a Model 6242, Type D210 as well as a 605x.
16660 # Note that the cursor-down key transmits ^Z. Job control users, beware!
16661 # This also matches a posted description of something called a `Dasher 100'
16662 # so there's a dg100 alias here.
16663 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
16664 dg6053-old|dg100|Data General 6053,
16667 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
16668 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
16669 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
16670 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
16671 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
16672 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
16675 # (Some performance can be gained over the generic DG terminal type)
16676 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
16678 home=\020\0\0, ll=^P\0^W, use=dg-generic,
16680 # Like 6053, but adds reverse video and more keypad and function keys.
16681 d200|d200-dg|Data General DASHER D200,
16682 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
16683 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16684 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
16685 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
16687 # DASHER D210 series terminals in ANSI mode.
16688 # Reverse video, no insert/delete character/line, 7 bits/character only.
16690 # Initialization string 1 sets:
16691 # <0 - scrolling enabled
16692 # <1 - blink enabled
16693 # <4 - print characters regardless of attributes
16694 d210|d214|Data General DASHER D210 series,
16697 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
16698 cub1=^H, cup=\E[%i%p1%d;%p2%dH, dim=\E[2m, ed=\E[J,
16699 el=\E[K, el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
16700 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
16701 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
16703 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=ansi+local,
16706 # DASHER D210 series terminals in DG mode.
16707 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
16708 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
16710 ed=^^FF, use=d200-dg,
16712 # DASHER D211 series terminals in ANSI mode.
16713 # Like the D210, but with 8-bit characters and local printer support.
16715 # Initialization string 2 sets:
16717 # 2;1 - 8 bit operations
16718 # 1;1 - 8 bit (international) keyboard language
16719 # \E(B - default primary character set (U.S. ASCII)
16720 # \E)4 - default secondary character set (international)
16721 # ^O - primary character set
16723 d211|d215|Data General DASHER D211 series,
16725 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
16728 # Initialization string 2 sets:
16730 # 2;0 - 7 bit operations
16731 # 1;0 - 7 bit (native) keyboard language
16732 # \E(0 - default character set (the keyboard native language)
16733 # ^O - primary character set
16734 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
16736 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
16738 # Like the D210 series, but adds support for 8-bit characters.
16740 # Reset string 2 sets:
16741 # ^^N - secondary character set
16742 # ^^FS0> - 8 bit international character set
16743 # ^^O - primary character set
16744 # ^^FS00 - default character set (matching the native keyboard language)
16746 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
16748 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
16750 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
16753 # Enhanced DG mode with changes to be more UNIX compatible.
16754 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
16757 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
16758 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
16759 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
16760 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
16761 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
16762 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
16763 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
16764 rs2=\036N\036FS0E\036O\036FS00,
16765 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
16766 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
16768 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
16769 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
16770 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
16772 is3=^^Fz2, use=d216+,
16774 d217-unix|Data General DASHER D217 in DG-UNIX mode,
16776 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
16779 # DASHER D220 color terminal in ANSI mode.
16780 # Like the D470C but with fewer colors and screen editing features.
16782 # Initialization string 1 sets:
16784 # <0 - scrolling enabled
16785 # <1 - blink enabled
16786 # <4 - print characters regardless of attributes
16787 # \E[m - all attributes off
16788 # Reset string 1 sets:
16789 # \Ec - initial mode defaults (RIS)
16791 d220|Data General DASHER D220,
16793 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16794 use=dg+color8, use=d470c,
16796 d220-7b|Data General DASHER D220 in 7 bit mode,
16798 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16799 use=dg+color8, use=d470c-7b,
16801 # Initialization string 3 sets:
16802 # - default cursor (solid rectangle)
16803 # Reset string 2 sets:
16804 # ^^N - secondary character set
16805 # ^^FS0> - 8 bit international character set
16806 # ^^O - primary character set
16807 # ^^FS00 - default character set (matching the native keyboard language)
16809 d220-dg|Data General DASHER D220 color terminal in DG mode,
16811 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
16812 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
16815 # DASHER D230C color terminal in ANSI mode.
16816 # Like the D220 but with minor ANSI compatibility improvements.
16818 d230c|d230|Data General DASHER D230C,
16819 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
16820 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
16821 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}
16822 %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e
16823 %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;,
16824 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
16825 smul=\E[4;50m, use=dgkeys+7b, use=d220,
16827 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
16830 # DASHER D400/D450 series terminals.
16831 # These add intelligent features like insert/delete to the D200 series.
16833 # Initialization string 2 sets:
16834 # ^^FQ2 - default cursor (solid rectangle)
16835 # ^^FW - character protection disabled
16836 # ^^FJ - normal (80 column) mode
16837 # ^^F\^ - horizontal scrolling enabled (for alignment)
16838 # ^^FX004? - margins at columns 0 and 79
16839 # ^^F] - horizontal scrolling disabled
16840 # ^^O - primary character set
16841 # ^^FS00 - default character set (the keyboard native language)
16842 # - (should reset scrolling regions, but that glitches the screen)
16843 # Reset string 1 sets:
16844 # ^^FA - all terminal defaults except scroll rate
16845 # Reset string 2 sets:
16846 # ^^F] - horizontal scrolling disabled
16847 # ^^FT0 - jump scrolling
16849 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
16851 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
16852 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
16853 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
16854 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
16856 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
16858 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16859 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
16860 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
16863 # DASHER D410/D460 series terminals in ANSI mode.
16864 # These add a large number of intelligent terminal features.
16866 # Initialization string 1 sets:
16868 # <0 - scrolling enabled
16869 # <1 - blink enabled
16870 # <2 - horizontal scrolling enabled (for alignment)
16871 # <4 - print characters regardless of attributes
16872 # \E[5;0v - normal (80 column) mode
16873 # \E[1;1;80w - margins at columns 1 and 80
16875 # 1 - print all characters even if protected
16876 # 6 - character protection disabled
16877 # <2 - horizontal scrolling disabled
16878 # - (should reset scrolling regions, but that glitches the screen)
16880 # Initialization string 2 sets:
16882 # 3;2 - default cursor (solid rectangle)
16883 # 2;1 - 8 bit operations
16884 # 1;1 - international keyboard language
16885 # \E(B - default primary character set (U.S. ASCII)
16886 # \E)4 - default secondary character set (international)
16887 # ^O - primary character set
16889 # Reset string 1 sets:
16890 # \Ec - initial mode defaults (RIS)
16891 # \E[<2h - horizontal scrolling disabled
16893 # Reset string 2 sets:
16895 # 4;0 - jump scrolling
16896 # 2;1 - 8 bit operations
16897 # 1;1 - 8 bit (international) keyboard language
16898 # \E(B - default primary character set (U.S. ASCII)
16899 # \E)4 - default secondary character set (international)
16901 d410|d411|d460|d461|Data General DASHER D410/D460 series,
16902 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
16903 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, ich=\E[%p1%d@,
16905 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
16906 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, ri=\EM,
16907 rmacs=\E)4\017, rs1=\Ec\E[<2h,
16908 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
16909 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
16910 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
16911 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
16912 use=ansi+idl, use=ansi+pp,
16914 # Initialization string 2 sets:
16916 # 3;2 - default cursor (solid rectangle)
16917 # 2;0 - 7 bit operations
16918 # 1;0 - 7 bit (native) keyboard language
16919 # \E(0 - default character set (the keyboard native language)
16920 # ^O - primary character set
16922 # Reset string 2 sets:
16924 # 4;0 - jump scrolling
16925 # 2;0 - 7 bit operations
16926 # 1;0 - 7 bit (native) keyboard language
16927 # \E(0 - default character set (the keyboard native language)
16929 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
16931 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
16932 rs2=\E[4;0;2;0;1;0v\E(0,
16933 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
16934 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
16935 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
16937 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
16939 enacs@, rmacs=\036FS00,
16940 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16941 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
16943 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
16946 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
16948 # Initialization string 1 sets:
16950 # <0 - scrolling enabled
16951 # <1 - blink enabled
16952 # <2 - horizontal scrolling enabled (for alignment)
16953 # <4 - print characters regardless of attributes
16954 # \E[5;1v - compressed (135 column) mode
16955 # \E[1;1;126 - margins at columns 1 and 126
16957 # 1 - print all characters even if protected
16958 # 6 - character protection disabled
16959 # <2 - horizontal scrolling disabled
16960 # - (should reset scrolling regions, but that glitches the screen)
16962 # Reset string 1 sets:
16963 # \Ec - initial mode defaults (RIS)
16964 # \E[5;1v - compressed (135 column) mode
16965 # \E[1;1;126w - margins at columns 1 and 126
16966 # \E[<2h - horizontal scrolling disabled
16968 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
16970 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16971 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
16973 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
16975 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16976 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
16978 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
16981 # These add intelligent features like scrolling regions.
16982 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
16983 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
16984 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
16985 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
16986 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
16988 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
16989 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
16990 vpa=\036FPFF%p1%2.2X,
16991 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
16992 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
16994 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
16996 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
16998 rs2=\036P@1\036FK\036FX0083,
16999 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
17000 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
17002 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
17005 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
17006 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
17008 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
17010 clear=\036FG\036PH, fsl=\036F}01\022,
17011 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
17012 tsl=\036F}00\036FP%p1%2.2X18\036PG,
17013 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
17014 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
17017 # Relative cursor motions are confined to the current window,
17018 # which is not what the scrolling region specification expects.
17019 # Thus, relative vertical cursor positioning must be deleted.
17020 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
17021 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
17023 cud1@, cuu1@, ll@, use=d462+,
17025 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
17027 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
17029 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
17031 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
17033 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
17036 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
17038 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
17040 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
17042 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
17044 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
17047 d430c-dg|d430-dg|Data General D430C in DG mode,
17048 use=d413-dg, use=dg+fixed,
17049 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
17050 use=d413-dg, use=dg+ccc,
17052 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
17053 use=d413-unix, use=dgunix+fixed,
17054 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
17055 use=d413-unix-w, use=dgunix+fixed,
17056 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
17057 use=d413-unix-25, use=dgunix+fixed,
17058 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
17059 use=d413-unix-s, use=dgunix+fixed,
17060 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
17061 use=d413-unix-sr, use=dgunix+fixed,
17062 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
17063 use=d413-unix, use=dgunix+ccc,
17064 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
17065 use=d413-unix-w, use=dgunix+ccc,
17066 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
17067 use=d413-unix-25, use=dgunix+ccc,
17068 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
17069 use=d413-unix-s, use=dgunix+ccc,
17070 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
17071 use=d413-unix-sr, use=dgunix+ccc,
17073 # DASHER D470C color terminal in ANSI mode.
17074 # Like the D460 but with 16 colors and without a compressed mode.
17076 # Initialization string 1 sets:
17078 # <0 - scrolling enabled
17079 # <1 - blink enabled
17080 # <2 - horizontal scrolling enabled (for alignment)
17081 # <4 - print characters regardless of attributes
17082 # \E[1;1;80w - margins at columns 1 and 80
17084 # 1 - print all characters even if protected
17085 # 6 - character protection disabled
17086 # <2 - horizontal scrolling disabled
17087 # - (should reset scrolling regions, but that glitches the screen)
17089 d470c|d470|Data General DASHER D470C,
17090 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17091 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17092 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
17093 use=dg+color, use=d460,
17095 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
17096 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17097 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17098 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
17099 use=dg+color, use=d460-7b,
17101 # Initialization string 2 sets:
17102 # ^^FQ2 - default cursor (solid rectangle)
17103 # ^^FW - character protection disabled
17104 # ^^F\^ - horizontal scrolling enabled (for alignment)
17105 # ^^FX004? - margins at columns 0 and 79
17106 # ^^F] - horizontal scrolling disabled
17107 # ^^O - primary character set
17108 # ^^FS00 - default character set (the keyboard native language)
17109 # - (should reset scrolling regions, but that glitches the screen)
17111 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
17112 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
17114 use=dgmode+color, use=d460-dg,
17116 # DASHER D555 terminal in ANSI mode.
17117 # Like a D411, but has an integrated phone.
17118 d555|Data General DASHER D555,
17120 d555-7b|Data General DASHER D555 in 7-bit mode,
17122 d555-w|Data General DASHER D555 in wide mode,
17124 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
17126 d555-dg|Data General DASHER D555 series in DG mode,
17129 # DASHER D577 terminal in ANSI mode.
17130 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
17131 d577|Data General DASHER D577,
17133 d577-7b|Data General DASHER D577 in 7-bit mode,
17135 d577-w|Data General DASHER D577 in wide mode,
17137 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
17140 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
17143 # DASHER D578 terminal.
17144 # Like a D577, but without compressed mode; like a D470C in this respect.
17146 # Initialization string 1 sets:
17148 # <0 - scrolling enabled
17149 # <1 - blink enabled
17150 # <2 - horizontal scrolling enabled (for alignment)
17151 # <4 - print characters regardless of attributes
17152 # \E[1;1;80w - margins at columns 1 and 80
17154 # 1 - print all characters even if protected
17155 # 6 - character protection disabled
17156 # <2 - horizontal scrolling disabled
17157 # - (should reset scrolling regions, but that glitches the screen)
17159 d578|Data General DASHER D578,
17160 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
17161 d578-7b|Data General DASHER D578 in 7-bit mode,
17162 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
17164 #### Datamedia (dm)
17166 # Datamedia was headquartered in Nashua, New Hampshire until it went
17167 # out of business in 1993, but the ID plates on the terminals referred
17168 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
17169 # manufacturer which threw out all information about the terminals.
17172 cs10|colorscan|Datamedia Color Scan 10,
17175 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17176 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ind=\n, kcub1=\E[D,
17177 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
17178 kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17179 smso=\E[7m, smul=\E[4m, use=ansi+erase,
17181 cs10-w|Datamedia Color Scan 10 with 132 columns,
17183 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
17185 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
17186 dm1520|dm1521|Datamedia 1520,
17188 cols#80, it#8, lines#24,
17189 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
17190 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17191 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
17193 # dm2500: this terminal has both <ich> and <smir>. Applications using
17194 # termcap/terminfo directly (rather than through ncurses) might be confused.
17195 dm2500|datamedia2500|Datamedia 2500,
17198 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
17199 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
17200 dch1=\020\010\030\035$<10*>,
17201 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
17202 ich1=\020\034\030\035$<10*>,
17203 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
17204 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
17205 smdc=^P, smir=^P, smso=^N,
17206 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
17207 # also, has a meta-key.
17208 # From: <goldberger@su-csli.arpa>
17209 # (dmchat: ":MT:" changed to ":km:" -- esr)
17210 dmchat|dmchat version of Datamedia 2500,
17212 dl1=\020\032\030\035$<2/>,
17213 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
17214 # (dm3025: ":MT:" changed to ":km:" -- esr)
17215 dm3025|Datamedia 3025a,
17217 cols#80, it#8, lines#24,
17218 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17219 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17220 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
17221 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
17222 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
17223 smir=\EP, smso=\EO1,
17224 dm3045|Datamedia 3045a,
17225 am, eo, km@, ul, xenl,
17226 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
17227 kf0=\Ey\r, kf9=\Ex\r, khome=\EH, pad=^?, rmdc@, rmir=\EP,
17228 rmso@, smdc@, smso@, use=dm3025, use=hp+pfk+cr,
17229 # Datamedia DT80 soft switches:
17230 # 1 0=Jump 1=Smooth
17231 # Autorepeat 0=off 1=on
17232 # Screen 0=Dark 1=light
17233 # Cursor 0=u/l 1=block
17235 # 2 Margin Bell 0=off 1=on
17236 # Keyclick 0=off 1=on
17237 # ANSI/VT52 0=VT52 1=ANSI
17238 # Xon/Xoff 0=Off 1=On
17240 # 3 Shift3 0=Hash 1=UK Pound
17242 # Newline 0=Off 1=On
17243 # Interlace 0=Off 1=On
17245 # 4 Parity 0=Odd 1=Even
17246 # Parity 0=Off 1=On
17247 # Bits/Char 0=7 1=8
17248 # Power 0=60Hz 1=50Hz
17250 # 5 Line Interface 0=EIA 1=Loop
17251 # Aux Interface 0=EIA 1=Loop
17252 # Local Copy 0=Off 1=On
17255 # 6 Aux Parity 0=Odd 1=Even
17256 # Aux Parity 0=Off 1=On
17257 # Aux Bits/Char 0=7 1=8
17258 # CRT Saver 0=Off 1=On
17259 # dm80/1 is a VT100 lookalike, but it doesn't seem to need any padding.
17260 dm80|dmdt80|dt80|Datamedia dt80/1,
17261 clear=\E[2J\E[H, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH,
17262 cuu1=\E[A, ed=\E[J, el=\E[K, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
17263 ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>,
17264 smso=\E[7m, smul=\E[4m, use=vt100+4bsd,
17265 # except in 132 column mode, where it needs a little padding.
17266 # This is still less padding than the VT100, and you can always turn on
17267 # the ^S/^Q handshaking, so you can use VT100 flavors for things like
17269 dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode,
17271 clear=\E[H\E[2J$<50/>, cud1=\n,
17272 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
17273 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
17274 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
17275 dt80-sas|Datamedia DT803/DTX for SAS usage,
17278 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
17279 bel=^G, clear=^L, cr=\r,
17280 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
17281 cub1=^H, cud1=\EB, cuf1=^\,
17282 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
17283 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
17284 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
17285 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
17286 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
17287 smso=\E$2\004, tbc=\E'0,
17289 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
17290 # These aren't end-all Excel termcaps; but do insert/delete char/line
17291 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
17292 # The naming convention has been bent somewhat, with the use of E? (where
17293 # E is for 'Excel') as # a name. This was done to distinguish the entries
17294 # from the other Datamedias in use here, and yet to associate a model of
17295 # the Excel terminals with the regular datamedia terminals that share
17296 # major characteristics.
17297 excel62|excel64|Datamedia Excel 62,
17298 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17299 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17301 excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode,
17302 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17303 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17305 excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode,
17306 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
17307 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
17308 smir=\E[4h, use=dt80,
17312 # Falco Data Products
17313 # 440 Potrero Avenue
17314 # Sunnyvale, CA 940864-196
17315 # Vox: (800)-325-2648
17316 # Fax: (408)-745-7860
17317 # Net: techsup@charm.sys.falco.com
17319 # Current Falco models as of 1995 are generally ANSI-compatible and support
17320 # emulations of DEC VT-series, Wyse, and TeleVideo types.
17323 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
17324 # This terminal was released around 1983 and was discontinued long ago.
17325 # The standout and underline highlights are the same.
17326 falco|ts1|ts-1|Falco ts-1,
17328 cols#80, it#8, lines#24,
17329 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17330 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17331 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
17332 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17333 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
17334 smir=\Eq, smso=\Eg1, smul=\Eg1,
17335 falco-p|ts1p|ts-1p|Falco ts-1 with paging option,
17336 OTbs, am, da, db, mir, msgr, ul,
17337 cols#80, it#8, lines#24,
17338 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H,
17339 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, dch1=\EW, dl1=\ER,
17340 ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, il1=\EE, ind=\n,
17341 is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17342 kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, rmso=\Eg0,
17343 rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, smso=\Eg4,
17344 smul=\Eg1, use=ansi+local1,
17346 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
17347 ts100|ts100-sp|Falco ts100-sp,
17350 cub1=^H, cud1=\n, cuf1=\E[C$<2>, cuu1=\E[A$<2>, dch1=\E~W,
17351 dl1=\E~R, ich1=\E~Q, il1=\E~E, is1=\E~)\E~ea, kcub1=\EOD,
17352 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmam=\E[?7l,
17354 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smam=\E[?7h,
17355 smkx=\E[?1h\E=, use=ansi+csr, use=ansi+local,
17356 use=decid+cpr, use=vt100+4bsd, use=vt100+fnkeys,
17358 ts100-ctxt|Falco ts-100 saving context,
17359 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
17361 #### Florida Computer Graphics
17364 # Florida Computer Graphics Beacon System, using terminal emulator program
17365 # "host.com", as provided by FCG. This description is for an early release
17366 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
17369 # From: David Bryant <cbosg!djb> 1/7/83
17370 beacon|FCG Beacon System,
17373 bel=\ESTART\r\E37\r\EEND\r$<1>,
17374 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
17375 cub1=^H, cud1=\n, cuf1=\EV,
17376 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
17377 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
17378 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
17379 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
17380 rmul=\ESTART\r\E60\,0\r\EEND\r,
17381 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
17382 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
17383 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
17384 smul=\ESTART\r\E60\,1\r\EEND\r,
17389 # The f1720a differences from ANSI: no auto margin, destructive
17390 # tabs, # of lines, funny highlighting and underlining
17391 f1720|f1720a|fluke 1720A,
17393 cols#80, lines#16, xmc#1,
17394 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H,
17395 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, ind=\ED,
17396 is2=\E[H\E[2J, kcub1=^_, kcud1=^], kcuf1=^^, kcuu1=^\,
17397 ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
17398 smul=\E[4m, use=ansi+local1,
17400 #### Liberty Electronics (Freedom)
17402 # Liberty Electronics
17403 # 48089 Fremont Blvd
17405 # Vox: (510)-623-6000
17406 # Fax: (510)-623-7021
17408 # From: <faletti@berkeley.edu>
17409 # (f100: added empty <acsc> to suppress a tic warning;
17410 # made this relative to adm+sgr -- note that <invis> isn't
17411 # known to work for f100 but does on the f110. --esr)
17412 f100|freedom|freedom100|Liberty Freedom model 100,
17413 OTbs, am, bw, hs, mir, msgr, xon,
17415 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
17416 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17417 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
17418 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
17419 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
17420 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
17421 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
17422 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17423 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
17424 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
17425 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17426 f100-rv|freedom-rv|Liberty Freedom 100 in reverse video,
17427 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
17428 # The f110 and f200 have problems with vi(1). They use the ^V
17429 # code for the down cursor key. When kcud1 is defined in terminfo
17430 # as ^V, the Control Character Quoting capability (^V in insert mode)
17431 # is lost! It cannot be remapped in vi because it is necessary to enter
17432 # a ^V to to quote the ^V that is being remapped!!!
17434 # f110/f200 users will have to decide whether
17435 # to lose the down cursor key or the quoting capability. We will opt
17436 # initially for leaving the quoting capability out, since use of VI
17437 # is not generally applicable to most interactive applications
17438 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
17439 f110|freedom110|Liberty Freedom 110,
17442 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
17443 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
17444 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
17445 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17446 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
17447 smso=\EG<, tsl=\Ef, use=f100,
17448 f110-14|Liberty Freedom 110 14inch,
17450 f110-w|Liberty Freedom 110 - 132 cols,
17451 cols#132, use=f110,
17452 f110-14w|Liberty Freedom 110 14in/132 cols,
17455 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17456 f200|freedom200|Liberty Freedom 200,
17457 OTbs, am, eslok, hs, mir, msgr, xon,
17458 cols#80, it#8, lines#24, wsl#80,
17459 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
17460 clear=^Z, cnorm=\E.1, cr=\r,
17461 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
17462 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17463 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
17464 flash=\Eo$<200/>\En, fsl=\r, home=^^,
17465 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
17466 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
17467 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17468 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17469 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17470 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
17471 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17472 f200-w|Liberty Freedom 200 - 132 cols,
17473 cols#132, use=f200,
17474 # The f200 has the ability to reprogram the down cursor key. The key is
17475 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
17476 # so powering the terminal off and on will not cause the change to be lost.
17477 f200vi|Liberty Freedom 200 for vi,
17478 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
17479 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
17480 cols#132, use=f200vi,
17484 # Graphon Corporation
17485 # 544 Division Street
17486 # Campbell, CA 95008
17487 # Vox: (408)-370-4080
17488 # Fax: (408)-370-5047
17489 # Net: troy@graphon.com (Troy Morrison)
17492 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
17493 # including one odd hybrid that starts out life on power-up as a character
17494 # terminal, than can be switched to X graphics mode (driven over the serial
17495 # line) by an escape sequence. No info on this beast yet.
17496 # (go140: I added <rmam>/<smam> based on the init string -- esr)
17497 go140|graphon go-140,
17499 cols#80, it#8, lines#24,
17500 clear=\E[H\E[2J$<10/>, cub1=^H,
17501 cup=\E[%i%p1%2d;%p2%2dH, dch1=\E[P, dl1=\E[M,
17502 ed=\E[J$<10/>, el=\E[K, ht=^I,
17503 if=/usr/share/tabset/vt100, il1=\E[L,
17504 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17505 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
17506 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
17507 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
17508 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
17509 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, use=ansi+local1,
17511 go140w|graphon go-140 in 132 column mode,
17514 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17516 # Hacked up vt200 termcap to handle GO-225/VT220
17517 # From: <edm@nwnexus.WA.COM>
17518 # (go225: I added <rmam>/<smam> based on the init string -- esr)
17519 go225|go-225|Graphon 225,
17520 OTbs, am, mir, xenl,
17521 cols#80, it#8, lines#25, vt#3,
17522 blink=\E[5m, bold=\E[1m, cub1=^H, cud1=\n, cuf1=\E[C,
17523 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17524 home=\E[H, ht=^I, il1=\E[L, ind=\ED,
17525 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kf1=\EOP,
17526 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m,
17527 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
17528 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
17529 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
17530 sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
17531 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
17532 use=ansi+arrows, use=ansi+csr, use=ansi+erase,
17534 #### Harris (Beehive)
17536 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
17537 # Their terminal group is ancient history now (1995) though the parent
17538 # company is still in business.
17541 # Beehive documentation is undated and marked Preliminary and has no figures
17542 # so we must have early Superbee2 (Model 600, according to phone conversation
17543 # with mfr.). It has proved reliable except for some missing padding
17544 # (notably after \EK and <nl> at bottom of screen).
17546 # The key idea is that AEP mode is poison for <cup> & that US's in
17547 # the local memory should be avoided like the plague. That means
17548 # that the 2048 character local buffer is used as 25 lines of 80
17549 # characters, period. No scrolling local memory, folks. It also
17550 # appears that we cannot use naked INS LINE feature since it uses
17551 # US. The sbi fakes <il1> with an 80-space insert that may be too
17552 # slow at low speeds; also spaces get converted to \040 which is
17553 # too long for some programs (not vi). DEL LINE is ok but slow.
17555 # The <nl> string is designed for last line of screen ONLY; cup to
17556 # 25th line corrects the motion inherent in scrolling to Page 1.
17558 # There is one understood bug. It is that the screen appears to
17559 # pop to a new (blank) page after a <nel>, or leave a half-line
17560 # ellipsis to a quad that is the extra 48 memory locations. The
17561 # data received is dumped into memory but not displayed. Not to
17562 # worry if <cup> is being used; the lines not displayed will be,
17563 # whenever the cursor is moved up there. Since <cup> is addressed
17564 # relative to MEMORY of window, nothing is lost; but beware of
17565 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
17566 # therefore, is setenv MORE -c .
17568 # WARNING: Not all features tested.
17570 # Timings are assembled from 3 sources. Some timings may reflect
17571 # SB2/Model 300 that were used if more conservative.
17572 # Tested on a Model 600 at 1200 and 9600 bd.
17574 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
17575 # placed on the keyboard and useless because of AEP, is made
17576 # into a backspace key. In use ESC must be pressed twice (to send)
17577 # and sending ^C must be prefixed by ESC to avoid that weird
17578 # transmit mode associated with ENTER key.
17580 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
17581 # the screen, then it has dropped into ENTER mode; hit
17582 # RESET--ONLINE--!tset.
17584 # As delivered this machine has a FATAL feature that will throw
17585 # it into that strange transmit state (SPOW) if the space bar is
17586 # hit after a CR is received, but before receiving a LF (or a
17589 # The circuits MUST be modified to eliminate the SPOW latch.
17590 # This is done by strapping on chip A46 of the I/O board; cut
17591 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
17592 # chip. This mod has been checked out on a Mod 600 of Superbee II.
17593 # With this modification absurdly high timings on cr are
17596 # NOTE WELL that the rear panel switch should be set to CR/LF,
17599 sb1|Beehive SuperBee,
17600 OTbs, am, bw, da, db, mir, ul, xsb,
17601 cols#80, lines#25, xmc#1,
17602 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
17603 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
17604 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
17605 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
17606 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17607 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17608 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17609 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
17610 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kdl1=\EM,
17611 ked=\EJ, kel=\EK, kf0=\E2, kf9=\E1, khome=\EH, kich1=\EQ\EO,
17612 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
17613 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
17614 smso=\E_1, smul=\E_0, tbc=\E3, use=hp+pfk-cr,
17616 sbi|superbee|Beehive SuperBee at Indiana U.,
17618 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
17620 # Alternate (older) description of Superbee - f1=escape, f2=^C.
17621 # Note: there are at least 3 kinds of superbees in the world. The sb1
17622 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
17623 # The sb3 puts garbage on the bottom of the screen when you scroll with
17624 # the switch in the back set to CRLF instead of AEP. This description
17625 # is tested on the sb2 but should work on all with either switch setting.
17626 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
17627 # the other two if you want to try to hit that tiny escape key.
17628 # This description is tricky: being able to use cup depends on there being
17629 # 2048 bytes of memory and the hairy <nl> string.
17630 superbee-xsb|Beehive SuperBee (improved),
17632 cols#80, it#8, lines#25,
17633 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
17634 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
17635 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
17636 home=\EH, ht=^I, hts=\E1,
17637 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
17638 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
17639 use=hp+pfk-cr, use=vt52+arrows,
17640 # This loses on lines > 80 chars long, use at your own risk
17641 superbeeic|SuperBee with insert char,
17642 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
17643 sb2|sb3|fixed SuperBee,
17644 xsb@, use=superbee,
17646 #### Beehive Medical Electronics
17648 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
17649 # Regarding your question though; Beehive terminals weren't made by Harris.
17650 # They were made by Beehive Medical Electronics in Utah. They went out of
17651 # business in the early '80s.
17653 # (OK, then, I don't know why a couple of these say "Harris Beehive".)
17656 # Reports are that most of these Beehive entries (except superbee) have not
17657 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
17659 # (bee: <ich1> was empty, which is obviously bogus -- esr)
17660 beehive|bee|Harris Beehive,
17663 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
17664 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
17665 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
17666 kclr=\EE, kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ,
17667 kil1=\EL, krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@,
17668 sgr0=\Ed@, smir=\EQ, smso=\EdP, smul=\Ed`, use=vt52+arrows,
17669 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
17670 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
17671 # look at those spaces in <rmso>/<smso>. Seems strange to me...
17672 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
17673 # really care, cook up one using ^F -- esr)
17674 beehive3|bh3m|beehiveIIIm|Harris Beehive 3m,
17676 cols#80, it#8, lines#20,
17677 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
17678 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
17679 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
17680 beehive4|bh4|Beehive 4,
17683 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
17684 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
17685 # There was an early Australian kit-built computer called a "Microbee".
17686 # It's not clear whether this is for one of those or for a relative
17688 microb|microbee|Micro Bee series,
17690 cols#80, it#8, lines#24,
17691 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17692 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17693 el=\EK, ht=^I, ind=\n, kf9=\Ex, khome=\EH, rmso=\Ed@,
17694 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
17695 use=hp+pfk-cr, use=vt52+arrows,
17697 # 8675, 8686, and bee from Cyrus Rahman
17698 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
17699 ha8675|Harris 8675,
17700 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
17701 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
17702 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
17704 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
17706 ha8686|Harris 8686,
17707 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
17708 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
17709 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
17711 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
17712 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
17713 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
17714 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
17718 # Hazeltine appears to be out of the terminal business as of 1995. These
17719 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
17720 # Harris. They have a hazeltine.com domain (but no web page there ) and can
17724 # 450 East Pulaski Road
17725 # Greenlawn, New York 11740
17727 # As late as 1993, manuals for the terminal product line could still be
17730 # TRW Customer Service Division
17733 # Fairfield, NJ 07007-2078
17735 # They're now (1998) a subsidiary of General Electric, operating under the
17736 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
17737 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
17740 # Since <cuf1> is blank, when you want to erase something you
17741 # are out of luck. You will have to do ^L's a lot to
17742 # redraw the screen. h1000 is untested. It doesn't work in
17743 # vi - this terminal is too dumb for even vi. (The code is
17744 # there but it isn't debugged for this case.)
17745 hz1000|Hazeltine 1000,
17748 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
17750 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
17751 hz1420|Hazeltine 1420,
17754 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
17755 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
17756 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
17758 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
17759 # freakout with out-of-range args and tn3270. No hz since it needs to
17761 hz1500|Hazeltine 1500,
17764 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17765 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
17766 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
17767 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
17768 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
17769 # h1510 assumed to be in sane escape mode. Else use h1500.
17770 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
17771 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
17772 # removed incorrect and overridden ":do=^J:" -- esr)
17773 hz1510|Hazeltine 1510,
17776 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
17777 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
17778 el=\E^O, il1=\E^Z, ind=\n,
17780 # The following switch settings are assumed for normal operation:
17781 # FULL CR U/L_CASE ESCAPE
17782 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
17783 # Other switches may be set for operator convenience or communication
17785 hz1520|Hazeltine 1520,
17786 OTbs, am, bw, msgr,
17788 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
17789 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17790 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
17791 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
17792 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
17793 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
17794 # This version works with the escape switch off
17795 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
17796 hz1520-noesc|Hazeltine 1520 (no escape),
17799 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17800 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
17801 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
17802 # Note: the h1552 appears to be the first Hazeltine terminal which
17803 # is not braindamaged. It has tildes and backprimes and everything!
17804 # Be sure the auto lf/cr switch is set to cr.
17805 hz1552|Hazeltine 1552,
17807 cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
17809 hz1552-rv|Hazeltine 1552 reverse video,
17810 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
17811 # Note: h2000 won't work well because of a clash between upper case and ~'s.
17812 hz2000|Hazeltine 2000,
17815 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
17816 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
17817 il1=~\032$<6>, ind=\n, pad=^?,
17818 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
17819 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
17820 # to work ok. There is one problem though if one types a lot of garbage
17821 # characters very fast vi seems not able to keep up and hangs while trying
17822 # to insert. That's in insert mode while trying to insert in the middle of
17823 # a line. It might be because the Esprit doesn't have insert char and delete
17824 # char as a built in function. Vi has to delete to end of line and then
17825 # redraw the rest of the line.
17826 esprit|Hazeltine Esprit I,
17829 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
17830 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17831 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
17832 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
17833 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
17834 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
17835 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
17836 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
17837 esprit-am|Hazeltine esprit auto-margin,
17839 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
17840 # Vi it seems always wants to send a control J for "do" and it turned out
17841 # that the terminal would work somewhat if the auto LF/CR was turned off.
17842 # (hmod1: removed :dn=~^K: -- esr)
17843 hmod1|Hazeltine Modular 1,
17846 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17847 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
17848 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
17849 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
17851 # Hazeltine Executive 80 Model 30 (1554?)
17852 # from Will Martin <control@ALMSA-1.ARPA> via BRL
17853 # Like VT100, except for different "am" behavior.
17854 hazel|exec80|h80|he80|Hazeltine Executive 80,
17856 cols#80, it#8, lines#24, vt#3,
17857 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
17858 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
17859 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
17860 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
17861 ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
17862 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
17863 kf3=\EOR, kf4=\EOS, rev=\E[7m$<2/>,
17864 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
17865 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
17866 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17867 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
17868 smul=\E[4m$<2/>, use=ansi+csr,
17873 ibm327x|line mode IBM 3270 style,
17875 clear=\r\n, el=\r, home=\r,
17877 ibm3101|i3101|IBM 3101-10,
17880 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17881 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17882 el=\EI, home=\EH, hts=\E0, ind=\n, nel=\r\n, tbc=\EH,
17884 ibm3151|IBM 3151 display,
17885 is2=\E S, rmacs=\E>B, rs2=\E S,
17886 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17887 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17888 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
17889 sgr0=\E4@\E>B, smacs=\E>A, use=ibm3162,
17890 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
17891 # removed kend, knp, kpp -TD
17893 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17894 # Added ich1 (kich1 without ich1 doesn't make sense).
17895 # Added il1 (kil1 without il1 doesn't make sense).
17896 # Added xon (terminal uses XON/XOFF flow control).
17898 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
17899 OTbs, am, mir, msgr, xon,
17900 cols#80, it#8, lines#24,
17901 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
17903 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
17904 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17905 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
17906 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
17907 kclr=\EL\r, kctab=\E1, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI,
17908 kf1=\Ea\r, kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
17909 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
17910 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
17911 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
17912 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
17913 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
17914 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
17915 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
17916 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17917 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17918 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
17919 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
17922 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
17923 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
17925 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17926 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
17929 ibm3162|IBM 3162 display,
17930 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
17931 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
17934 # This really should not use setab/setaf, but it is clear that the
17935 # original terminfo does not toggle red/blue colors as in setb/setf.
17936 ibm3164|i3164|IBM 3164,
17938 colors#8, pairs#64,
17939 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
17940 setab=\E4 %p1%{64}%+%c,
17941 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
17942 smcup=\E!9/N\E>B, use=ibm3161,
17944 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
17946 cols#80, it#8, lines#25,
17947 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17949 bel=^G, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH,
17950 dch1=\E[P, ech=\E[%p1%dX, home=\E[H, hpa=\E[%i%p1%dG,
17951 ind=\E[S, is2=\Ec, kcbt=\E[Z, kclr=\E[144q, kdch1=\E[P,
17952 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
17953 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
17954 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
17955 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
17956 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
17957 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
17958 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
17959 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
17960 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
17961 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, kich1=\E[139q,
17962 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
17963 kri=\E[155q, krmir=\E[4l, ri=\E[T, rmir=\E[4l, rs2=\Ec,
17964 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17966 smir=\E[4h, use=ansi+arrows, use=ansi+erase,
17967 use=ansi+idl, use=ansi+local, use=ansi+sgrbold,
17970 ibmaed|IBM Experimental display,
17971 OTbs, am, eo, msgr,
17972 cols#80, it#8, lines#52,
17973 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
17974 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17975 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
17976 il1=\EN, kbs=^H, rmso=\E0, sgr0=\E0, smso=\E0,
17978 ibm-apl|apl|IBM apl terminal simulator,
17979 lines#25, use=dm1520,
17980 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
17981 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
17982 ibmmono|IBM workstation monochrome,
17984 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
17985 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
17986 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
17987 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
17988 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
17989 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
17991 ibmega|IBM Enhanced Color Display,
17992 ht=^I, kcub1=^H, kcud1=\n, use=ibmmono,
17993 # This color scheme is assumed in some recent IBM terminal descriptions
17994 # (green on black, emulated on a 16-color terminal).
17995 ibm+color|IBM color definitions,
17996 colors#8, ncv#3, pairs#64,
17998 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
17999 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
18000 %=%t46m%e%p1%{7}%=%t107m%;,
18001 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
18002 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
18003 %=%t36m%e%p1%{7}%=%t97m%;,
18004 ibm+16color|IBM aixterm color definitions,
18005 colors#16, pairs#0x100,
18006 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
18007 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
18008 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18009 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18010 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18011 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18012 ibm5154|IBM 5154 Color display,
18014 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18016 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
18017 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
18019 ibmvga-c|IBM VGA display color termcap,
18020 ht=^I, kcub1=^H, kcud1=\n, use=ibmega-c,
18021 ibmvga|IBM VGA display,
18023 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
18024 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
18026 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
18027 ibm6155|IBM 6155 Black & White display,
18028 blink@, bold@, use=ibm5151,
18029 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
18030 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
18032 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
18033 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
18035 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
18037 ibm6154|IBM 6154 Color displays,
18038 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18039 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18041 sgr0=\E[0;10m, use=ibm5154,
18042 ibm6153|IBM 6153 Black & White display,
18043 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18044 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18046 sgr0=\E[0;10m, use=ibm5151,
18047 ibm6153-90|IBM 6153 Black & White display (36-line),
18049 blink@, bold@, use=ibm5151,
18050 ibm6153-40|IBM 6153 Black & White display (12-line),
18051 cols#40, lines#12, use=ibm6153-90,
18052 ibm8512|ibm8513|IBM color VGA Terminal,
18054 cub1=\E[D, is2=\Eb\E[m\017\E[?7h, kf0=\E[010q, rc=\E[u,
18055 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
18056 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
18057 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
18058 smdc=\E[4h, use=ibm8503,
18059 hft-c|HFT with Color,
18060 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
18061 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
18062 use=ibm5151, use=ibm+color,
18063 hft-c-old|HFT with Color PC850,
18064 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18066 hft-old|AIWS High Function Terminal,
18069 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
18070 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18071 dl1=\E[M, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\n,
18072 invis=\E[8m, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
18073 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
18074 kf8=\E[008q, kf9=\E[009q, knp=\E[153q, kpp=\E[159q,
18075 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
18076 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m,
18077 use=ansi+arrows, use=ansi+erase, use=ibm+color,
18079 ibm-system1|system1|IBM system/1 computer,
18082 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
18083 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
18085 # lft-pc850 : IBM Low Function Terminal Device
18086 # lft "supports" underline, bold, and blink in the sense that the lft code
18087 # sets all the right bits. HOWEVER, depending upon the adapter, these
18088 # attributes may or may not be supported by the device driver.
18089 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
18091 cols#80, it#8, lines#25,
18092 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18094 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
18095 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
18096 ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, home=\E[H,
18097 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ind=\ED, is2=\Ec,
18098 kcbt=\E[Z, kclr=\E[144q, kdch1=\E[P, ked=\E[148q,
18099 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
18100 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
18101 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
18102 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
18103 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
18104 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
18105 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
18106 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
18107 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
18108 kf8=\E[008q, kf9=\E[009q, kich1=\E[139q, kil1=\E[140q,
18109 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
18110 krmir=\E[4l, ri=\EL, rmacs=\E(B, rmir=\E[4l, rmso=\E[0m,
18111 rmul=\E[0m, rs2=\Ec,
18112 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18113 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
18114 smacs=\E(0, smir=\E[4h, tbc=\E[3g, use=ansi+arrows,
18115 use=ansi+idl, use=ansi+local, use=ansi+sgrbold,
18118 # "Megapel" refers to the display adapter, which was used with the IBM RT
18120 ibm5081|hft|IBM Megapel Color display,
18121 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
18122 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
18123 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
18125 dsl=\Ej\EYA \EI\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c,
18126 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
18128 ibm8514|IBM 8514/a color VGA display,
18130 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
18131 ibm8514-c|IBM 8514 color display with standout and underline,
18133 dsl=\Ej\EYI \EI\Ek, ht=^I, kcub1=^H, kcud1=\n,
18134 tsl=\Ej\EYI%+ \Eo, use=ibmega-c,
18137 # AIX entries. IBM ships these with AIX 3.2.5.
18138 # -- added rc, sc based on manpage -TD
18139 # -- added rmacs, smacs based on manpage -TD
18140 # Note that we could use ibm+16color, but that is not how IBM defines this one.
18141 aixterm|IBM Aixterm Terminal Emulator,
18142 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, rc=\E8, ri@,
18143 rmacs=\E(B, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18144 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18145 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18146 sgr0=\E[0;10m\E(B, smacs=\E(0, use=ibm6154,
18148 aixterm+sl|status line for AIXterm,
18150 dsl=\E[?E, fsl=\E[?F, tsl=\E[?%p1%dT,
18152 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
18153 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, ri@, s0ds=\E(B,
18155 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18156 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18157 sgr0=\E[0;10m\E(B, use=ibm6153, use=aixterm+sl,
18158 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
18160 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18162 use=ibm6153, use=aixterm+sl,
18163 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
18165 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18167 sgr0=\E[m, smacs@, use=aixterm,
18168 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
18170 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18172 sgr0=\E[m, smacs@, use=aixterm-m,
18174 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
18175 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
18176 use=ibm+16color, use=aixterm,
18178 #### Infoton/General Terminal Corp.
18181 # gt100 sounds like something DEC would come out with. Let's hope they don't.
18182 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
18185 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18186 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
18187 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
18188 ind=\n, rmso=\Ea, smso=\Eb,
18193 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
18194 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
18195 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
18196 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
18198 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
18199 addrinfo|cursor-addressable Infoton,
18200 cup=\037%p1%c%p2%c, home=^H, use=infoton,
18202 # "VISTAR II/HZ Technical Users Manual" (May 1975).
18204 infoton2|cursor-addressable Infoton VISTAR II,
18205 cup=~\021%p2%c%p1%c, home=^H, use=infoton,
18207 # "VISTAR Technical User's Manual" (October 1972).
18209 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
18210 infoton|Infoton VISTAR,
18213 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
18214 ed=^K, ind=\n, ll=^H^\,
18216 # The ICL6402 was actually the Kokusai Display System 6402.
18217 # The 6404 was the KDS7372 (color version of the 6402).
18219 # ICL6404 control codes follow:
18222 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18223 #ctrl-A set SOM position at cursor position
18226 #ctrl-I Horizontal tab
18229 #ctrl-L Cursor right
18230 #ctrl-M Carriage return
18231 #ctrl-N Disable xon/xoff to host
18232 #ctrl-O Enable xon/xoff to host
18233 #ctrl-R Enable bidirectional mode
18234 #ctrl-T Disable bidirectional mode
18235 #ctrl-V Cursor down
18236 #ctrl-Z Clear unprotected data to insert char
18237 #ctrl-^ Cursor home
18240 #ESC lead-in char for multiple character command
18242 #ESC space R execute power on sequence
18243 #ESC ! p1 p2 define scroll region:
18244 # p1 = scroll top line: 20h - 37h
18245 # p1 = scroll bottom line: 20h - 37h
18246 #ESC " unlock keyboard
18247 #ESC # lock keyboard
18248 #ESC $ Semi-graphics mode on
18249 #ESC % Semi-graphics mode off
18250 #ESC & protect mode on
18251 #ESC ' protect mode off
18252 #ESC ( write protect mode off (full intensity)
18253 #ESC ) write protect mode on (half intensity)
18255 #ESC * clear screen
18256 #ESC + clear unprotected data to insert char
18257 #ESC , clear unprotected data to half intensity spaces
18258 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
18259 # p1 = page number 0 - 3
18260 # p2 = row 20h - 7fh
18261 # p3 = column (lo) 20h - 7fh
18262 # p4 = column (hi) 20h - 21h (only 132 col)
18263 #ESC . p1 set cursor style:
18264 # p1 = 0 invisible cursor
18265 # p1 = 1 block blinking cursor
18266 # p1 = 2 block steady cursor
18267 # p1 = 3 underline blinking cursor
18268 # p1 = 4 underline steady cursor
18269 #ESC / transmit cursor location (page, row, column)
18270 #ESC 0 p1 p2 p3 p4 program edit key:
18271 # p1 = edit key code: '@'-'S', '`'-'s'
18272 # p2 p3 p4 = program data (3 bytes)
18275 #ESC 2 clear tab at cursor
18276 #ESC 3 clear all tabs
18277 #ESC 4 send unprotect line to cursor
18278 #ESC 5 send unprotect page to cursor
18279 #ESC 6 send line to cursor
18280 #ESC 7 send page to cursor
18281 #ESC 8 n set scroll mode:
18282 # n = 0 set jump scroll
18283 # n = 1 set smooth scroll
18284 #ESC 9 n control display:
18285 # n = 0 display off
18287 #ESC : clear unprotected data to null
18288 #ESC ; clear unprotected data to insert char
18291 #ESC = p1 p2 address cursor to row, column
18292 # p1 = row 20h - 7fh
18293 # p2 = column (lo) 20h - 7fh
18294 # p3 = column (hi) 20h - 21h (only 132 col)
18295 #ESC > keyclick off
18296 #ESC ? transmit cursor location (row, column)
18298 #ESC @ copy print mode on
18299 #ESC A copy print mode off
18300 #ESC B block mode on
18301 #ESC C block mode off (conversation mode)
18302 #ESC D F set full duplex
18303 #ESC D H set half duplex
18305 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
18306 # 0 = black, 1 = red, 2 = green, 3 = yellow
18307 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
18308 #ESC G n set serial field attribute (n = 30h - 3Fh)
18309 #ESC H n full graphics mode:
18310 # n = 0 exit full graphics mode
18311 # n = 1 enter full graphics mode
18314 #ESC K forward page
18316 #ESC L unformatted page print
18317 #ESC M L move window left (132 col mode only)
18318 #ESC M R move window right (132 col mode only)
18319 #ESC N set page edit (clear line edit)
18320 #ESC O set line edit (clear page edit)
18321 #ESC P formatted page print
18322 #ESC Q character insert
18324 #ESC S send message unprotected only
18325 #ESC T erase line to insert char
18326 #ESC U set monitor mode (see ESC X, ESC u)
18328 #ESC V n select video attribute mode:
18329 # n = 0 serial field attribute mode
18330 # n = 1 parallel character attribute mode
18331 #ESC V 2 n define line attribute:
18332 # n = 0 single width single height
18333 # n = 1 single width double height
18334 # n = 2 double width single height
18335 # n = 3 double width double height
18336 #ESC V 3 n select character font:
18337 # n = 0 system font
18338 # n = 1 user defined font
18339 #ESC V 4 n select screen mode:
18340 # n = 0 page screen mode
18341 # n = 1 virtual screen mode
18342 #ESC V 5 n control mouse mode:
18343 # n = 0 disable mouse
18344 # n = 1 enable sample mode
18345 # n = 2 send mouse information
18346 # n = 3 enable request mode
18347 #ESC W character delete
18348 #ESC X clear monitor mode (see ESC U, ESC u)
18349 #ESC Y erase page to insert char
18351 #ESC Z n send user/status line:
18352 # n = 0 send user line
18353 # n = 1 send status line
18354 # n = 2 send terminal ID
18355 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
18359 # 3 = blink blank (= blank)
18361 # 5 = reverse blank
18362 # 6 = reverse blink
18363 # 7 = reverse blink blank (= reverse blank)
18365 # 9 = underline blank
18366 # : = underline blink
18367 # ; = underline blink blank
18368 # < = reverse underline
18369 # = = reverse underline blank
18370 # > = reverse underline blink
18371 # ? = reverse underline blink blank
18372 # p2, p3: f/grnd, b/grnd colour
18373 # (see ESC F for colours)
18374 # use ZZ for mono, eg.
18375 # ESC [ 0 Z Z for normal
18376 # ESC [ 4 Z Z for inverse etc.
18378 #ESC \ n set page size:
18379 # n = 1 24 lines/page
18380 # n = 2 48 lines/page
18381 # n = 3 72 lines/page
18382 # n = 4 96 lines/page
18383 #ESC ] n set Wordstar mode:
18384 # n = 0 normal (KDS7372) mode
18385 # n = 1 Wordstar mode
18387 #ESC b set foreground colour screen
18389 #ESC c n enter self-test mode:
18390 # n = 0 exit self test mode
18394 # n = 4 screen display test
18395 # n = 5 main/printer port test
18396 # n = 6 mouse port test
18397 # n = 7 graphics board test
18398 # n = 8 graphics memory test
18399 # n = 9 display all 'E'
18400 # n = : display all 'H'
18401 #ESC d set background colour screen
18403 #ESC e n program insert char (n = insert char)
18404 #ESC f text CR load user status line with 'text'
18406 #ESC g display user status line on 25th line
18407 #ESC h display system status line on 25th line
18409 #ESC j reverse linefeed
18410 #ESC k n duplex/local edit mode:
18411 # n = 0 duplex edit mode
18412 # n = 1 local edit mode
18413 #ESC l n select virtual screen:
18416 #ESC m save current config to NVRAM
18417 #ESC n p1 select display screen:
18422 #ESC o p1 p2 set characters/line and attribute:
18423 # p1 = 0 80 chars/line
18425 #ESC o p1 p2 set characters/line and attribute:
18426 # p1 = 0 80 chars/line
18427 # p1 = 1 132 chars/line
18428 # p2 = 0 single width single height
18429 # p2 = 1 single width double height
18430 # p2 = 2 double width single height
18431 # p2 = 3 double width double height
18433 #ESC q insert mode on
18434 #ESC r edit mode on
18435 #ESC s send message all
18436 #ESC t erase line to null
18437 #ESC u clear monitor mode (see ESC U, ESC X)
18438 #ESC v autopage mode on
18439 #ESC w autopage mode off
18440 #ESC x p1 p2 p3 define delimiter code...
18441 #ESC y erase page to null
18443 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
18444 # p1 = starting row
18445 # p2 = starting column
18449 #ESC { p1 p2 p3 p4 configure main port
18450 # (baud, stop bits, parity, word length)
18452 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
18453 # p1 = function key code:
18454 # '1' - ';' normal f1- f11
18455 # '<' - 'F' shifted f1 - f11
18456 # p2 = program mode:
18460 # Ctrl-Y = terminator
18461 # (use Ctrl-P to escape ^P, ^Y )
18463 #ESC } p1 p2 p3 p4 configure printer port
18464 # (baud, stop bits, parity, word length)
18465 #ESC ~ send system status
18467 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
18469 # Entry is by esr going solely on above information and is UNTESTED.
18470 # This actually looks a lot like a TeleVideo 9xx.
18471 # This entry uses page 0 and is monochrome; I'm not brave enough to try
18472 # to make color work without a test terminal. The <am> capability is a guess.
18473 # The initialization string sets conversation mode, blinking underline cursor,
18474 # full duplex, parallel attribute mode, display user status line, white
18475 # foreground, black background, normal highlight.
18477 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
18480 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
18481 cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c,
18482 cub1=^H, cud1=^V, cuf1=^L,
18483 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
18484 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
18485 hts=\E1, il1=\EE, invis=\E[1ZZ,
18486 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
18487 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
18488 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
18489 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
18490 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
18491 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
18492 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
18493 rs2=\Eo1, use=icl6404,
18495 #### Interactive Systems Corp
18497 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
18498 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
18499 # bought out by Sun.
18502 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
18503 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
18504 # ":le=^_:" later overridden -- esr)
18505 intext|Interactive Systems Corporation modified owl 1200,
18507 cols#80, it#8, lines#24, xmc#1,
18508 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
18509 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
18510 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
18511 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
18512 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
18513 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
18514 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
18515 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036:\264\026%%,
18517 intext2|intextii|INTERACTIVE modified owl 1251,
18519 cols#80, lines#24, xmc#0,
18520 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
18521 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, ed=\E[J,
18523 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
18524 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
18525 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
18526 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
18527 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
18528 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
18529 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
18530 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
18531 smul=\E[18 D, use=ansi+local1,
18533 #### Kimtron (abm, kt)
18535 # Kimtron seems to be history, but as March 1998 these people are still
18536 # offering repair services for Kimtron equipment:
18538 # Com/Pair Monitor Service
18539 # 1105 N. Cliff Ave.
18540 # Sioux Falls, South Dakota 57103
18542 # WATS voice: 1-800/398-4946
18543 # POTS fax: +1 605/338-8709
18544 # POTS voice: +1 605/338-9650
18545 # Email: <compair@sd.cybernex.net>
18546 # Internet/Web: <http://www.com-pair.com>
18548 # Kimtron entries include (undocumented) codes for: enter dim mode,
18549 # enter bold mode, enter reverse mode, turn off all attributes.
18552 # Kimtron ABM 85 added by Dual Systems
18553 # (abm85: removed duplicated ":kd=^J:" -- esr)
18554 abm85|Kimtron ABM 85,
18555 OTbs, am, bw, msgr,
18556 cols#80, it#8, lines#24, xmc#1,
18557 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
18558 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18559 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
18560 if=/usr/share/tabset/stdcrt, il1=\EE,
18561 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
18562 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
18563 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
18564 # Kimtron ABM 85H added by Dual Systems.
18565 # Some notes about the abm85h entries:
18566 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
18567 # firmware revs prior to SP51
18568 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
18569 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
18570 # in some places and NOT software settable i.e., <is2> can't fix it)
18571 # 3) In 85h mode, the arrow keys and special functions transmit when
18572 # the terminal is in dup-edit, and work only locally in local-edit.
18573 # Vi won't swallow `del char' for instance, but <smcup> turns on
18574 # dup-edit anyway so that the arrow keys will work right. If the
18575 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
18576 # <is2>. Note that 920E mode does not have software commands to toggle
18577 # between dup and local edit, so you get whatever was set last on the
18579 # 4) <flash> attribute is nice, but seems too slow to work correctly
18581 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
18582 # are selected, the <xmc@> entry should be removed.
18583 # 6) auto new-line should be on (selectable from setup mode only)
18585 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
18586 abm85h|Kimtron ABM 85H native mode,
18589 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
18591 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
18593 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
18595 abm85e|Kimtron ABM 85H in 920E mode,
18597 bel=^G, dim=\E), flash@,
18598 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
18600 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18601 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
18604 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
18606 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18607 # From: <malman@bbn-vax.arpa>
18608 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
18609 kt7|kimtron model kt-7,
18611 cols#80, it#8, lines#24,
18612 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
18613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18614 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
18615 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
18616 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
18617 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
18618 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18619 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18620 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
18621 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
18622 # other kt7 entry and the adjacent key capabilities). Removed EE which is
18623 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
18624 # but we can't figure out what.
18625 kt7ix|kimtron model kt-7 or 70 in IX mode,
18627 cols#80, it#8, lines#25,
18628 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
18629 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
18630 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18631 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
18632 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
18633 is2=\EG0\E s\017\E~, kcbt=\EI, kclr=\E*, kdl1=\ER, ked=\EY,
18634 kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
18635 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18636 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
18637 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
18638 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
18641 #### Microdata/MDIS
18643 # This was a line of terminals made by McDonnell-Douglas Information Systems.
18644 # These entries come direct from MDIS documentation. I have edited them only
18645 # to move primary names of the form p[0-9] * to aliases, and to comment out
18646 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
18647 # also removed the change history; the last version indicates this is
18648 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
18651 # McDonnell Information Systems Terminal Family History
18652 # =========================================
18654 # Prism-1, Prism-2 and P99:
18655 # Ancient Microdata and CMC terminals, vaguely like ADDS Regent 25.
18657 # Prism-4 and Prism-5:
18658 # Slightly less ancient range of Microdata terminals. Follow-on from
18659 # Prism-2, but with many enhancements. P5 has eight display pages.
18662 # A special terminal for use with library systems, primarily in Germany.
18663 # Limited numbers. Similar functionality to P5 (except attributes?).
18665 # Prism-7, Prism-8 and Prism-9:
18666 # More recent range of MDIS terminals, in which P7 and P8
18667 # replace the P4 & P5, with added functionality, and P9 is the flagship.
18668 # The P9 has two emulation modes - P8 and ANSI - and includes a
18669 # large number of the DEC VT220 control sequences. Both
18670 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
18672 # Prism-12 and Prism-14:
18673 # Latest range, functionally very similar to the P9. The P14 has a
18674 # black-on-white overscanning screen.
18676 # The terminfo definitions given here are:
18678 # p2 - Prism-2 (or Prism-1 or P99).
18680 # p4 - Prism-4 (and older P7s & P8s).
18681 # p5 - Prism-5 (or Prism-6).
18684 # p8 - Prism-8 (in national or multinational mode).
18685 # p8-w - 132 column version of p8.
18686 # p9 - Prism-9 in ANSI mode.
18687 # p9-w - 132 column version of p9.
18688 # p9-8 - Prism-9 in Prism-8 emulation mode.
18689 # p9-8-w - As p9-8, but with 132 columns.
18691 # p12 - Prism-12 in ANSI mode.
18692 # p12-w - 132 column version of p12.
18693 # p12-m - Prism-12 in MDC emulation mode.
18694 # p12-m-w - As p12-m, but with 132 columns.
18695 # p14 - Prism-14 in ANSI mode.
18696 # p14-w - 132 column version of p14.
18697 # p14-m - Prism-14 in MDC emulation mode.
18698 # p14-m-w - As p14-m, but with 132 columns.
18703 # Includes Prism-1 and basic P99 without SP or MP loaded.
18704 # The simplest form of Prism-type terminal.
18705 # Basic cursor movement and clearing operations only.
18706 # No video attributes.
18708 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18709 # value up, followed by backspace.
18711 prism2|MDC Prism-2,
18714 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18715 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18716 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18717 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
18718 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18719 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18720 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
18725 # Includes early versions of P7 & P8.
18726 # Basic family definition for most Prisms (except P2 and P9 ANSI).
18728 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18729 # value up, followed by backspace.
18730 # Cursor key definitions removed because they interfere with vi and csh keys.
18732 prism4|p4|P4|MDC Prism-4,
18733 am, bw, hs, mc5i, msgr,
18734 cols#80, lines#24, wsl#72, xmc#1,
18735 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
18736 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18737 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18738 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18739 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
18740 fsl=\035\345, home=^A,
18741 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18742 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18743 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
18744 rev=^CD, rmso=^C\s, rmul=^C\s,
18745 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
18746 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
18747 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
18748 vpa=\013%p1%{32}%+%c,
18753 # Same definition as p4. Includes Prism-6 (not tested!).
18754 # Does not use any multi-page features.
18756 prism5|p5|P5|MDC Prism-5,
18762 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
18764 # Use p4 for very early models of P7.
18765 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18767 prism7|p7|P7|MDC Prism-7,
18768 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
18773 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
18774 # Supports national and multinational character sets.
18776 # Alternate char set operations only work in multinational mode.
18777 # Use p4 for very early models of P8.
18778 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18779 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18781 prism8|p8|P8|MDC Prism-8,
18782 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
18783 vpa=\E[%i%p1%dd, use=p4,
18785 # p8-w: Prism-8 in 132 column mode
18786 # --------------------------------
18788 # 'Wide' version of p8.
18790 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18792 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
18794 is2=\E[<12h\E[<14h, use=p8,
18796 # p9: Prism-9 in ANSI mode
18797 # -------------------------
18799 # The "flagship" model of this generation of terminals.
18800 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
18802 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
18803 # Fixes to deal with terminal firmware bugs:
18804 # . 'ri' uses insert-line since rev index doesn't always
18805 # . 'sgr0' has extra '0' since esc[m fails
18806 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
18807 # Not covered in the current definition:
18809 # . Programming Fn keys
18810 # . Graphic characters (defaults correctly to vt100)
18811 # . Padding values (sets xon)
18812 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18814 prism9|p9|P9|MDC Prism-9 in ANSI mode,
18815 am, bw, hs, msgr, xenl, xon,
18816 cols#80, lines#24, vt#3, wsl#72,
18817 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[<4l, clear=^L,
18818 cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v, cub1=^H,
18819 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
18820 dsl=\E[%}\024, ech=\E[%p1%dX, ed=\E[J$<10>, el=\E[K,
18821 fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, ind=\n,
18822 is2=\E[&p\E[<12l\E F, kclr=^L, kf1=\E[11~, kf10=\E[21~,
18823 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18824 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18825 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~,
18826 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\r\n, prot=\E[32%{,
18827 rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L,
18828 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18829 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
18832 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
18833 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
18834 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18835 tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, use=ansi+arrows,
18836 use=ansi+idl, use=ansi+inittabs, use=ansi+local,
18839 # p9-w: Prism-9 in 132 column mode
18840 # --------------------------------
18842 # 'Wide' version of p9.
18844 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
18846 is2=\E[&p\E[<12l\E F\E[<14h,
18847 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
18849 # p9-8: Prism-9 in P8 mode
18850 # ------------------------
18852 # P9 terminal in P8 emulation mode.
18853 # Similar to p8 definition.
18854 # Insertion and deletion operations possible.
18856 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
18857 dch=\E[%p1%dP, dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@,
18858 use=ansi+idl, use=p8,
18860 # p9-8-w: Prism-9 in P8 and 132 column modes
18861 # ------------------------------------------
18863 # P9 terminal in P8 emulation mode and 132 column mode.
18865 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
18866 dch=\E[%p1%dP, dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@,
18867 use=ansi+idl, use=p8-w,
18869 # p12: Prism-12 in ANSI mode
18870 # ---------------------------
18872 # See p9 definition.
18874 prism12|p12|P12|MDC Prism-12 in ANSI mode,
18877 # p12-w: Prism-12 in 132 column mode
18878 # ----------------------------------
18880 # 'Wide' version of p12.
18882 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
18885 # p12-m: Prism-12 in MDC emulation mode
18886 # -------------------------------------
18888 # P12 terminal in MDC emulation mode.
18889 # Similar to p8 definition.
18890 # Insertion and deletion operations possible.
18892 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
18895 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
18896 # -------------------------------------------------------
18898 # P12 terminal in MDC emulation mode and 132 column mode.
18900 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
18903 # p14: Prism-14 in ANSI mode
18904 # ---------------------------
18906 # See p9 definition.
18908 prism14|p14|P14|MDC Prism-14 in ANSI mode,
18911 # p14-w: Prism-14 in 132 column mode
18912 # ----------------------------------
18914 # 'Wide' version of p14.
18916 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
18919 # p14-m: Prism-14 in MDC emulation mode
18920 # -------------------------------------
18922 # P14 terminal in MDC emulation mode.
18923 # Similar to p8 definition.
18924 # Insertion and deletion operations possible.
18926 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
18929 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
18930 # -------------------------------------------------------
18932 # P14 terminal in MDC emulation mode and 132 column mode.
18934 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
18937 # End of McDonnell Information Systems Prism definitions
18939 # These things were popular in the Pick database community at one time
18940 # From: George Land <georgeland@aol.com> 24 Sep 1996
18941 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
18943 cols#80, lines#24, ma#1, wsl#78, xmc#1,
18944 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
18945 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
18946 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
18947 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
18948 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
18949 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
18950 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18951 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
18952 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
18953 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
18956 #### Microterm (act, mime)
18958 # The mime1 entries refer to the Microterm Mime I or Mime II.
18959 # The default mime is assumed to be in enhanced act iv mode.
18962 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
18963 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
18964 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
18965 # since Sytek insists ^S means xoff.
18966 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
18967 act4|microterm|microterm act iv,
18970 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
18971 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
18972 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
18973 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
18974 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
18976 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
18977 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
18978 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
18979 act5|microterm5|microterm act v,
18980 ri=\EH$<3>, uc=^H\EA, use=act4,
18981 # Mimes using brightness for standout. Half bright is really dim unless
18982 # you turn up the brightness so far that lines show up on the screen.
18983 mime-fb|full bright mime1,
18984 is2=^S\E, rmso=^S, smso=^Y, use=mime,
18985 mime-hb|half bright mime1,
18986 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
18987 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
18988 # the more plausible ":do=^J:" -- esr)
18989 # uc was at one time disabled to get around a curses bug, be wary of it
18990 mime|mime1|mime2|mimei|mimeii|microterm mime1,
18992 cols#80, it#8, lines#24, vt#9,
18993 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
18994 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
18995 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
18996 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
18997 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
18998 # These termcaps (for mime2a) put the terminal in low intensity mode
18999 # since high intensity mode is so obnoxious.
19000 mime2a-s|microterm mime2a (emulating an enhanced Soroc iq120),
19003 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19004 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
19005 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
19006 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
19007 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
19008 smir=\EE, smso=\E:, smul=\E6,
19009 # This is the preferred mode (but ^X can't be used as a kill character)
19010 mime2a|mime2a-v|microterm mime2a (emulating an enhanced VT52),
19012 cols#80, it#8, lines#24,
19013 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19014 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
19015 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
19016 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, ri=\EA, rmir=^Z,
19017 rmso=\E9, rmul=\E5, smir=^O, smso=\E8, smul=\E4,
19019 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
19020 mime3a|mime1 emulating 3a,
19022 kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
19023 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
19025 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
19027 # Wed Mar 9 18:53:21 1983
19028 # We run our terminals at 2400 baud, so there might be some timing problems at
19029 # higher speeds. The major improvements in this model are the terminal now
19030 # scrolls down and insert mode works without redrawing the rest of the line
19031 # to the right of the cursor. This is done with a bit of a kludge using the
19032 # exit graphics mode to get out of insert, but it does not appear to hurt
19033 # anything when using vi at least. If you have some users using act4s with
19034 # programs that use curses and graphics mode this could be a problem.
19035 mime314|mm314|mime 314,
19038 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
19039 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
19040 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
19041 # Microterm mime 340 from University of Wisconsin
19042 mm340|mime340|mime 340,
19044 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19045 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19046 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
19047 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
19048 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
19049 # This came from University of Wisconsin marked "astro termcap for jooss".
19050 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
19051 # also added <rmam>/<smam> based on the init string -- esr)
19052 mt4520-rv|micro-term 4520 reverse video,
19053 am, hs, msgr, xenl, xon,
19054 cols#80, it#8, lines#24, wsl#80,
19055 bel=^G, cnorm=\E[0V\E8, cr=\r, cup=\E[%i%p1%d;%p2%dH,
19056 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P,
19057 flash=\E[?5l$<200/>\E[?5h, fsl=\E[?5l\E[?5h, home=\E[H,
19058 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=\ED,
19059 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
19061 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ll=\E[24;1H, nel=\EE,
19062 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
19063 rmso=\E[0m, rmul=\E[24m,
19064 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
19065 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[g,
19066 tsl=\E[25;1H, use=ansi+arrows, use=ansi+csr,
19067 use=ansi+erase, use=ansi+idl, use=ansi+local,
19069 # Fri Aug 5 08:11:57 1983
19070 # This entry works for the ergo 4000 with the following setups:
19071 # ansi,wraparound,newline disabled, xon/xoff disabled in both
19074 # WARNING!!! There are multiple versions of ERGO 4000 microcode
19075 # Be advised that very early versions DO NOT WORK RIGHT !!
19076 # Microterm does have a ROM exchange program- use it or lose big
19077 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
19078 ergo4000|microterm ergo 4000,
19081 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H,
19082 cup=\E[%i%p1%d;%p2%dH, dch1=\E[1P$<80>, dl1=\E[1M$<5*>,
19083 ed=\E[0J$<15>, el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>,
19085 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
19086 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19087 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
19088 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
19089 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
19090 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
19091 smso=\E[7m$<20>, use=ansi+local1,
19095 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
19096 # For what happened to that group, see the ADDS section.
19098 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
19101 # The following vendor-supplied termcaps were captured from the Boundless
19102 # Technologies site, 8 March 1998. I removed all-upper-case names that were
19103 # identical, except for case, to lower-case ones. I also uncommented the acsc
19106 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19107 # DEC VT200/300 with color capabilities added.
19108 ncr260intan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard,
19109 colors#8, pairs#64,
19110 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19111 use=decid+cpr, use=ncr260vt300an,
19112 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19113 # DEC VT200/300 with color capabilities added.
19114 ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard (132 column),
19115 colors#8, pairs#64,
19116 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19117 use=decid+cpr, use=ncr260vt300wan,
19118 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19119 # DEC VT200/300 with color capabilities added.
19120 ncr260intpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard,
19121 colors#8, pairs#64,
19122 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19124 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19125 # DEC VT200/300 with color capabilities added.
19126 ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard (132 column),
19127 colors#8, pairs#64,
19128 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19129 use=ncr260vt300wpp,
19130 # This definition for ViewPoint supports several attributes. This means
19131 # that it has magic cookies (extra spaces where the attributes begin).
19132 # Some applications do not function well with magic cookies. The System
19133 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19134 # If supporting various attributes is not vital, 'xmc#1' and the extra
19135 # attributes can be removed.
19136 # Mapping to ASCII character set ('acsc' capability) can also be
19137 # restored if needed.
19138 ncr260vppp|NCR 2900/260 viewpoint,
19139 am, bw, km, mc5i, mir, msgr, xon,
19140 cols#80, lines#24, nlab#32, xmc#1,
19141 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19142 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
19143 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
19144 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
19145 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, ed=\Ek$<2>,
19146 el=\EK$<2>, home=\036$<2>, ht=^I, hts=\E1, il1=\EM$<2>,
19147 ind=\n$<2>, invis=\EG1,
19148 is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19150 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
19151 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
19152 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B:\r,
19153 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
19154 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
19155 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
19156 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
19157 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
19158 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
19159 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
19160 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
19161 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
19162 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
19163 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19164 rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19166 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
19167 smso=\EG4, smul=\EG8, smxon=\Ec21, use=ncr260vp+sl,
19169 ncr260vp+sl|NCR 2900/260 viewpoint with status-line,
19171 dsl=\E`c, fsl=\r, tsl=\EF,
19173 ncr260vpwpp|NCR 2900/260 viewpoint wide mode,
19175 cup=\Ea%i%p1%dR%p2%dC$<30>,
19176 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19178 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19182 ncr260vt100an|NCR 2900/260 VT100 with ANSI keyboard,
19183 am, mir, msgr, xenl, xon,
19184 cols#80, lines#24, nlab#32,
19185 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19186 clear=\E[2J\E[1;1H$<20>, cr=\r$<1>, cub=\E[%p1%dD$<5>,
19187 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
19188 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19189 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19190 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19191 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX,
19192 ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, home=\E[H$<1>,
19193 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19194 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19195 indn=\E[%p1%dE$<5>,
19196 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19198 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19199 khlp=\E[28~, kich1=\E[2~, krdo=\E[29~, nel=\EE$<5>,
19200 ri=\EM$<5>, rmacs=^O, rmir=\E[4l, rmkx=\E[?1l\E>,
19201 rmso=\E[0m, rmul=\E[0m,
19202 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19204 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19205 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19206 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
19207 smkx=\E[?1h\E=, smso=\E[1;7m, tbc=\E[3g,
19208 vpa=\E[%p1%dd$<40>, use=ansi+csr, use=ansi+sgrbold,
19209 use=decid+cpr, use=vt220+vtedit, use=vt220+cvis,
19210 use=vt220+keypad, use=ncr260vt+sl,
19212 ncr260vt+sl|NCR 2900/260 VT100 status line,
19214 dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
19215 ncr260vt100wan|NCR 2900/260 VT100 wide mode ANSI keyboard,
19217 cup=\E[%i%p1%d;%p2%dH$<30>,
19218 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19220 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19223 ncr260vt100pp|NCR 2900/260 VT100 with PC+ keyboard,
19224 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19225 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19226 kend=\E[5~, khome=\E[2~, kich1=\E[1~, kpp=\E[3~, lf1=pf1,
19227 lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19229 ncr260vt100wpp|NCR 2900/260 VT100 wide mode PC+ keyboard,
19231 cup=\E[%i%p1%d;%p2%dH$<30>,
19232 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19234 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19237 ncr260vt200an|NCR 2900/260 VT200 with ANSI keyboard,
19238 am, mir, msgr, xenl, xon,
19239 cols#80, lines#24, nlab#32,
19240 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19241 clear=\E[2J\E[1;1H$<20>, cr=\r$<1>,
19242 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
19243 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
19244 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19245 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19246 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19247 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19248 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19249 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19250 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19251 indn=\E[%p1%dE$<5>,
19252 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19254 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19255 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19256 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19257 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
19258 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
19259 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
19260 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~,
19261 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
19262 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i,
19263 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, ri=\EM$<5>,
19264 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
19265 rmso=\E[27m, rmul=\E[24m,
19266 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19269 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19270 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19271 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19272 smir=\E[4h, smkx=\E[?1h\E=, tbc=\E[3g,
19273 vpa=\E[%p1%dd$<40>, use=ansi+sgrbold, use=decid+cpr,
19274 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
19277 ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard,
19279 cup=\E[%i%p1%d;%p2%dH$<30>,
19280 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
19281 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
19282 ncr260vt200pp|NCR 2900/260 VT200 with PC+ keyboard,
19283 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19284 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19285 kend=\E[1~, khome=\E[H, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
19286 rmkx=\E>, smkx=\E=, use=ncr260vt200an,
19287 ncr260vt200wpp|NCR 2900/260 VT200 wide mode PC+ keyboard,
19289 cup=\E[%i%p1%d;%p2%dH$<30>,
19290 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19292 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19295 ncr260vt300an|NCR 2900/260 VT300 with ANSI keyboard,
19296 am, mir, msgr, xenl, xon,
19297 cols#80, lines#24, nlab#32,
19298 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19299 clear=\E[2J\E[1;1H$<20>, cr=\r$<1>,
19300 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
19301 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
19302 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19303 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19304 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19305 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19306 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19307 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19308 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19309 indn=\E[%p1%dE$<5>,
19310 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19312 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19313 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19314 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19315 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
19316 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
19317 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
19318 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~,
19319 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
19320 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i,
19321 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, ri=\EM$<5>,
19322 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
19323 rmso=\E[27m, rmul=\E[24m,
19324 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19327 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19328 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19329 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19330 smir=\E[4h, smkx=\E[?1h\E=, tbc=\E[3g,
19331 vpa=\E[%p1%dd$<40>, use=ansi+sgrbold, use=decid+cpr,
19332 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
19335 ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard,
19337 cup=\E[%i%p1%d;%p2%dH$<30>,
19338 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19340 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19343 ncr260vt300pp|NCR 2900/260 VT300 with PC+ keyboard,
19344 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19345 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19346 kend=\E[1~, khome=\E[H, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
19347 rmkx=\E>, smkx=\E=, use=ncr260vt300an,
19348 ncr260vt300wpp|NCR260VT300WPP|NCR 2900/260 VT300 wide mode PC+ keyboard,
19350 cup=\E[%i%p1%d;%p2%dH$<30>,
19351 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19353 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19356 # This terminfo file contains color capabilities for the Wyse325 emulation of
19357 # the NCR 2900/260C color terminal. Because of the structure of the command
19358 # (escape sequence) used to set color attributes, one of the fore/background
19359 # colors must be preset to a given value. I have set the background color to
19360 # black. The user can change this setup by altering the last section of the
19361 # 'setf' definition. The escape sequence to set color attributes is
19362 # ESC d y <foreground_color> <background_color> 1
19363 # In addition, the background color can be changed through the desk accessories.
19364 # The capability 'op' sets colors to green on black (default combination).
19366 # NOTE: The NCR Unix System Administrator's Shell will not function properly
19367 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
19368 # capability and recompile if you wish to have it included.
19370 ncr260wy325pp|NCR 2900/260 Wyse 325,
19371 am, bw, km, mc5i, mir, msgr, xon,
19372 colors#16, cols#80, lines#24, ncv#33, nlab#32,
19373 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19374 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
19375 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19376 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19377 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19378 el=\Et$<5>, home=\036$<5>, ht=^I, hts=\E1, il1=\EE$<5>,
19379 ind=\n$<5>, invis=\EG1,
19380 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19382 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19383 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
19384 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
19385 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
19386 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
19387 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
19388 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
19389 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
19390 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19391 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
19392 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19393 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19394 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19395 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19396 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19399 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19400 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19401 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
19402 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
19403 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
19404 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
19405 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
19406 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19408 ncr260wy325wpp|NCR 2900/260 Wyse 325 wide mode,
19410 cup=\Ea%i%p1%dR%p2%dC$<30>,
19411 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19413 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19416 # This definition for Wyse 350 supports several attributes. This means
19417 # that it has magic cookies (extra spaces where the attributes begin).
19418 # Some applications do not function well with magic cookies. The System
19419 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19420 # If supporting various attributes is not vital, 'xmc#1' and the extra
19421 # attributes can be removed.
19422 # Mapping to ASCII character set ('acsc' capability) can also be
19423 # restored if needed.
19424 # In addition, color capabilities have been added to this file. The drawback,
19425 # however, is that the background color has to be black. The foreground colors
19426 # are numbered 0 through 15.
19428 # NOTE: The NCR Unix System Administrator's Shell does not function properly
19429 # with the 'pairs' capability defined as below. If you wish to
19430 # have it included, Un-comment it and recompile (using 'tic').
19432 ncr260wy350pp|NCR 2900/260 Wyse 350,
19433 colors#16, ncv#33, pairs#16,
19434 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, cbt=\EI,
19435 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, ed=\Ey$<5>,
19436 el=\Et$<5>, ht=^I, hts=\E1,
19437 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19439 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
19440 rmacs=\EH\003\EcB0,
19441 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19444 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19445 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19446 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
19447 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
19448 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
19449 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
19450 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, tbc=\E0,
19451 use=ncr260vp+sl, use=ncr160wy50+pp,
19452 ncr260wy350wpp|NCR 2900/260 Wyse 350 wide mode,
19454 cup=\Ea%i%p1%dR%p2%dC$<30>,
19455 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19457 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19460 # This definition for Wyse 50+ supports several attributes. This means
19461 # that it has magic cookies (extra spaces where the attributes begin).
19462 # Some applications do not function well with magic cookies. The System
19463 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19464 # If supporting various attributes is not vital, 'xmc#1' and the extra
19465 # attributes can be removed.
19466 # Mapping to ASCII character set ('acsc' capability) can also be
19467 # restored if needed.
19468 # (ncr260wy50+pp: originally contained commented-out
19469 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
19470 ncr260wy50+pp|NCR 2900/260 Wyse 50+,
19471 am, bw, km, mc5i, mir, msgr, xon,
19472 cols#80, lines#24, nlab#32, xmc#1,
19473 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19474 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19475 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19476 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
19477 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>,
19478 ed=\EY$<5>, el=\ET$<5>, home=\036$<10>, ht=\011$<5>,
19479 hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19480 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19481 \Ee4\Ex@\E`9\Ee7$<100>,
19482 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19483 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19484 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19485 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19486 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19487 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19488 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19489 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19490 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19491 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19492 mc0=\EP$<10>, mc4=^T, mc5=^R,
19493 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19494 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19495 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19496 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19497 \Ee4\Ex@\E`9\Ee7$<100>,
19498 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
19499 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>,
19501 ncr260wy50+wpp|NCR 2900/260 Wyse 50+ wide mode,
19503 cup=\Ea%i%p1%dR%p2%dC$<30>,
19504 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19505 \Ee4\Ex@\E`9\Ee7$<200>,
19506 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19507 \Ee4\Ex@\E`9\Ee7$<200>,
19509 ncr260wy60pp|NCR 2900/260 Wyse 60,
19510 am, bw, km, mc5i, mir, msgr, xon,
19511 cols#80, lines#24, nlab#32,
19512 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19513 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
19514 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19515 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19516 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19517 el=\Et$<5>, home=\036$<25>, ht=\011$<15>, hts=\E1$<15>,
19518 il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19519 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19520 \Ee4\Ex@\E`9\Ee7$<100>,
19521 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19522 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
19523 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19524 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19525 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
19526 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
19527 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
19528 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
19529 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
19530 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19531 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19532 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
19533 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19534 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19535 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19536 \Ee4\Ex@\E`9\Ee7$<100>,
19537 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
19538 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
19540 ncr260wy60wpp|NCR 2900/260 Wyse 60 wide mode,
19542 cup=\Ea%i%p1%dR%p2%dC$<30>,
19543 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19544 \Ee4\Ex@\E`9\Ee7$<100>,
19545 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19546 \Ee4\Ex@\E`9\Ee7$<100>,
19548 ncr160vppp|NCR 2900/160 viewpoint,
19550 ncr160vpwpp|NCR 2900/160 viewpoint wide mode,
19552 ncr160vt100an|NCR 2900/160 VT100 with ANSI keyboard,
19554 ncr160vt100pp|NCR 2900/160 VT100 with PC+ keyboard,
19556 ncr160vt100wan|NCR 2900/160 VT100 wide mode ANSI keyboard,
19557 use=ncr260vt100wan,
19558 ncr160vt100wpp|NCR 2900/160 VT100 wide mode PC+ keyboard,
19559 use=ncr260vt100wpp,
19560 ncr160vt200an|NCR 2900/160 VT200 with ANSI keyboard,
19562 ncr160vt200pp|NCR 2900/160 VT200 with PC+ keyboard,
19564 ncr160vt200wan|NCR 2900/160 VT200 wide mode ANSI keyboard,
19565 use=ncr260vt200wan,
19566 ncr160vt200wpp|NCR 2900/160 VT200 wide mode PC+ keyboard,
19567 use=ncr260vt200wpp,
19568 ncr160vt300an|NCR 2900/160 VT300 with ANSI keyboard,
19570 ncr160vt300pp|NCR 2900/160 VT300 with PC+ keyboard,
19572 ncr160vt300wan|NCR 2900/160 VT300 wide mode ANSI keyboard,
19573 use=ncr260vt300wan,
19574 ncr160vt300wpp|NCR 2900/160 VT300 wide mode PC+ keyboard,
19575 use=ncr260vt300wpp,
19576 ncr160wy50+pp|NCR 2900/160 Wyse 50+,
19578 ncr160wy50+wpp|NCR 2900/160 Wyse 50+ wide mode,
19579 use=ncr260wy50+wpp,
19580 ncr160wy60pp|NCR 2900/160 Wyse 60,
19582 ncr160wy60wpp|NCR 2900/160 Wyse 60 wide mode,
19584 ncrvt100an|ncrvt100pp|NCR VT100 for the 2900 terminal,
19585 hs, mc5i, mir, xon,
19587 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
19588 blink=\E[5m$<30>, bold=\E[1m$<30>,
19589 clear=\E[2J\E[1;1H$<300>,
19590 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
19591 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
19592 cuf=\E[%p1%dC$<30>, cup=\E[%i%p1%d;%p2%dH$<100>,
19593 cuu=\E[%p1%dA$<30>, dch=\E[%p1%dP$<40>,
19594 dch1=\E[1P$<10>, dl=\E[%p1%dM$<70>, dl1=\E[M$<40>,
19595 dsl=\E[31l$<25>, ed=\E[0J$<300>, el=\E[0K$<30>,
19596 el1=\E[1K$<30>, enacs=\E(B\E)0$<40>, fsl=1$<10>,
19597 home=\E[H$<2>$<80>, il=\E[%p1%dL$<80>,
19598 il1=\E[B\E[L$<80>, ind=\ED,
19599 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
19600 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kent=\r, kf1=\EOP, kf2=\EOQ,
19601 kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, rc=\E8,
19602 rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
19603 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
19604 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
19605 B\E)0\E%/0n\E[P\031$<200>,
19607 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
19608 %p3%|%t;7%;%?%p4%t;5%;m$<120>,
19609 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
19610 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
19611 tsl=\E[>+1$<70>, use=decid+cpr, use=vt100+4bsd,
19612 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
19614 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
19615 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
19616 \E)0\E%/0n\E[P\031$<200>,
19619 # Vendor-supplied NCR termcaps end here
19621 # NCR7900 DIP switches:
19625 # 5 - Parity (Odd/Even)
19626 # 6 - Don't Send or Do Send Spaces
19627 # 7 - Parity Enable
19628 # 8 - Stop Bits (One/Two)
19631 # 1 - Upper/Lower Shift
19632 # 2 - Typewriter Shift
19633 # 3 - Half Duplex / Full Duplex
19634 # 4 - Light/Dark Background
19635 # 5-6 - Carriage Return Without / With Line Feed
19636 # 7 - Extended Mode
19637 # 8 - Suppress Keyboard Display
19640 # 1 - End of line entry disabled/enabled
19641 # 2 - Conversational mode / (Local?) Mode
19642 # 3 - Control characters displayed / not displayed
19643 # 4 - (2-wire?) / 4-wire communications
19644 # 5 - RTS on and off for each character
19645 # 6 - (50Hz?) / 60 Hz
19646 # 7 - Exit after level zero diagnostics
19647 # 8 - RS-232 interface
19650 # 1 - Reverse Channel (yes / no)
19651 # 2 - Manual answer (no / yes)
19652 # 3-4 - Cursor appearance
19653 # 5 - Communication Rate
19654 # 6 - Enable / Disable EXT turnoff
19655 # 7 - Enable / Disable CR turnoff
19656 # 8 - Enable / Disable backspace
19658 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
19659 # reverse, blink, dim, and underline) the appropriate number of bits (by
19660 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
19661 # '@' is (effectively) "or"ed with each attribute to generate the proper third
19662 # character in the <ESC>0 sequence. The <sgr> string implements the following
19665 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
19666 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
19668 # Where: P1 <==> Standout attribute parameter
19669 # P2 <==> Underline attribute parameter
19670 # P3 <==> Reverse attribute parameter
19671 # P4 <==> Blink attribute parameter
19672 # P5 <==> Dim attribute parameter
19673 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
19674 ncr7900i|ncr7900|n7900|NCR 7900 model 1,
19676 cols#80, lines#24, xmc#1,
19677 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
19678 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
19679 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
19680 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
19682 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19684 sgr0=\E0@, smso=\E0Q, smul=\E0`,
19685 ncr7900iv|NCR 7900 model 4,
19688 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
19689 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
19690 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
19691 kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ,
19692 kf8=\ER, khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
19693 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, use=vt52+arrows,
19694 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
19695 # The user can enter a CTRL-B to get out of this locked state.
19696 # In <hpa>, we want to output the character given by the formula:
19697 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
19698 ncr7901|NCR 7901 model,
19701 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
19702 cub1=^H, cud1=\n, cuf1=^F,
19703 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
19705 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
19706 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
19707 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
19708 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19710 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
19711 vpa=\013%p1%{64}%+%c,
19713 # Newbury Data Recording Limited (Newbury Data)
19715 # Have been manufacturing and reselling various peripherals for a long time
19716 # They don't make terminals anymore, but are still in business (in 2007).
19717 # Their e-mail address is at ndsales@newburydata.co.uk
19718 # and their post address is:
19720 # Newbury Data Recording Ltd,
19721 # Premier Park, Road One,
19722 # Winsford, Cheshire, CW7 3PT
19724 # Their technical support is still good, they sent me for free a printed copy
19725 # of the 9500 user manual and I got it just 1 week after I first contacted them
19729 # Manufactured in the early/mid eighties, behaves almost the same as a
19730 # TeleVideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
19731 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
19732 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
19733 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
19734 # recognized: if you type in "ESC !", the next (third) character is not
19735 # echoed, showing that the terminal was actually waiting for a parameter!
19736 ndr9500|nd9500|Newbury Data 9500,
19737 am, bw, hs, mc5i, mir, msgr, ul, xon,
19738 cols#80, lines#24, wsl#79,
19739 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
19740 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
19741 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19742 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
19743 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
19744 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
19745 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
19746 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
19747 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19748 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
19749 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
19750 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19751 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19752 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
19753 pfloc=\E|%{48}%p1%+%c2%p2%s\031,
19754 pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej,
19755 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
19756 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
19757 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
19758 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
19760 ndr9500-nl|NDR 9500 with no status line,
19763 dsl@, fsl@, tsl@, use=ndr9500,
19765 ndr9500-25|NDR 9500 with 25th line enabled,
19766 lines#25, use=ndr9500,
19768 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
19769 lines#25, use=ndr9500-nl,
19771 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
19774 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
19775 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
19776 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
19777 smso=\EG4, smul=\EG8, use=ndr9500,
19779 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
19780 lines#25, use=ndr9500-mc,
19782 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
19785 dsl@, fsl@, tsl@, use=ndr9500-mc,
19787 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
19788 lines#25, use=ndr9500-mc-nl,
19790 #### Perkin-Elmer (Owl)
19792 # These are official terminfo entries from within Perkin-Elmer.
19795 bantam|pe550|pe6100|Perkin Elmer 550,
19798 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19799 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19800 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
19801 fox|pe1100|Perkin Elmer 1100,
19804 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19805 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19806 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
19807 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
19808 owl|pe1200|Perkin Elmer 1200,
19811 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19812 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19813 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
19814 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
19815 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
19816 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
19817 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
19818 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
19819 pe1251|pe6300|pe6312|Perkin Elmer 1251,
19821 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
19822 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
19823 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19824 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
19825 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
19826 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
19827 # (pe7000m: this had
19828 # rmul=\E!\0, smul=\E!\040,
19829 # which is probably wrong, it collides with kf0
19830 pe7000m|Perkin Elmer 7000 series monochrome monitor,
19833 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
19834 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19835 ed=\EJ, el=\EI, home=\EH, ind=\n,
19836 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
19837 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
19838 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
19839 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
19841 pe7000c|Perkin Elmer 7000 series colour monitor,
19842 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
19843 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
19847 # Sperry Univac has merged with Burroughs to form Unisys.
19850 # This entry is for the Sperry UTS30 terminal running the TTY
19851 # utility under control of CP/M Plus 1R1. The functionality
19852 # provided is comparable to the DEC VT100.
19853 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
19854 uts30|Sperry UTS30 with cp/m@1R1,
19856 cols#80, lines#24, wsl#40,
19857 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19858 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
19859 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
19860 cub1=^H, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP,
19861 dch1=\EM, dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r,
19862 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL,
19863 il1=\EN, ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H,
19864 khome=\E[H, rc=\EX, rev=\E[7m,
19865 rf=/usr/share/tabset/vt100, ri=\EI, rin=\E[%p1%dA,
19866 rmacs=\Ed, rmam=\E[?7l,
19867 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\EW,
19868 sgr0=\E[m, smacs=\EF, smam=\E[?7m, tsl=\E], uc=\EPB,
19869 use=ansi+apparrows, use=ansi+local, use=ansi+sgrso,
19874 # Tandem builds these things for use with its line of fault-tolerant
19875 # transaction-processing computers. They aren't generally available
19876 # on the merchant market, and so are fairly uncommon.
19879 tandem6510|adm3a repackaged by Tandem,
19882 # A funny series of terminal that TANDEM uses. The actual model numbers
19883 # have a fourth digit after 653 that designates minor variants. These are
19884 # natively block-mode and rather ugly, but they have a character mode which
19885 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
19886 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
19887 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
19888 tandem653|t653x|Tandem 653x multipage terminal,
19889 OTbs, am, da, db, hs,
19890 cols#80, lines#24, wsl#64, xmc#1,
19891 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
19892 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
19893 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
19894 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
19896 #### Tandy/Radio Shack
19898 # Tandy has a line of VDTs distinct from its microcomputers.
19901 dmterm|deskmate terminal,
19904 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
19905 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19906 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
19907 ich1=\EQ, il1=\EP, ind=\EX, invis@, kf0=\E1, kf1=\E2, kf2=\E3,
19908 kf3=\E4, kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
19909 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
19910 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
19911 use=adm+sgr, use=vt52+arrows,
19912 dt100|dt-100|Tandy DT-100 terminal,
19914 cols#80, lines#24, xmc#1,
19915 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
19916 cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H,
19917 cup=\010\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, ed=\E[J,
19918 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\n,
19919 is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19920 kcuu1=\E[A, kf1=\E[?3i, kf10=\E[?5i, kf2=\E[2i, kf3=\E[@,
19921 kf4=\E[M, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
19922 kf9=\E[21~, khome=\E[H, knp=\E[29~, kpp=\E[28~, lf1=f1,
19923 lf2=f2, lf3=f3, lf4=f4, lf5=f5, lf6=f6, lf7=f7, lf8=f8, ri=\EM,
19924 rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=^N,
19925 smso=\E[7m, smul=\E[4m, use=ansi+local1, use=vt220+cvis,
19926 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
19927 cols#132, use=dt100,
19928 dt110|Tandy DT-110 emulating ANSI,
19931 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
19932 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19933 cup=\010\E[%i%p1%d;%p2%dH, dch1=\E[0P, dl1=\E[0M,
19934 ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, ht=^I,
19935 ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
19936 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
19937 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
19938 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
19939 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
19940 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
19941 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19942 smacs=^N, smso=\E[7m, smul=\E[4m, use=ansi+local1,
19944 pt210|TRS-80 PT-210 printing terminal,
19947 bel=^G, cr=\r, cud1=\n, ind=\n,
19949 #### Tektronix (tek)
19951 # Tektronix tubes are graphics terminals. Most of them use modified
19952 # oscilloscope technology incorporating a long-persistence green phosphor,
19953 # and support vector graphics on a main screen with an attached "dialogue
19954 # area" for interactive text.
19957 tek|tek4012|Tektronix 4012,
19960 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
19961 ff=\014$<1000>, is2=\E^O,
19962 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19963 tek4013|Tektronix 4013,
19964 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
19965 tek4014|Tektronix 4014,
19967 is2=\E\017\E9, use=tek4012,
19968 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19969 tek4015|Tektronix 4015,
19970 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
19971 tek4014-sm|Tektronix 4014 in small font,
19972 cols#121, lines#58,
19973 is2=\E\017\E:, use=tek4014,
19974 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19975 tek4015-sm|Tektronix 4015 in small font,
19976 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
19977 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
19979 # You need to have "stty nl2" in effect. Some versions of tset(1) know
19980 # how to set it for you.
19982 # It's got the Magic Cookie problem around stand-out mode. If you can't
19983 # live with Magic Cookie, remove the :so: and :se: fields and do without
19984 # reverse video. If you like reverse video stand-out mode but don't want
19985 # it to flash, change the letter 'H' to 'P' in the :so: field.
19986 tek4023|Tektronix 4023,
19988 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
19989 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
19990 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
19991 rmso=^_@, smso=^_P,
19992 # It is recommended that you run the 4025 at 4800 baud or less;
19993 # various bugs in the terminal appear at 9600. It wedges at the
19994 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
19995 # on keyboard don't work. You have to hit BREAK twice to get
19996 # one break at any speed - this is a documented feature.
19997 # Can't use cursor motion because it's memory relative, and
19998 # because it only works in the workspace, not the monitor.
19999 # Same for home. Likewise, standout only works in the workspace.
20001 # <el> was commented out since vi and rogue seem to work better
20002 # simulating it with lots of spaces!
20004 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
20005 # and didn't seem necessary.
20007 tek4024|tek4025|tek4027|Tektronix 4024/4025/4027,
20009 cols#80, it#8, lines#34, lm#0,
20010 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
20011 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
20012 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
20013 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
20014 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
20015 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
20016 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
20018 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20019 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
20021 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
20022 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
20023 tek4025-17|Tektronix 4025 17 line window,
20024 lines#17, use=tek4025,
20025 tek4025-17-ws|Tektronix 4025 17 line window in workspace,
20026 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
20027 \r\037wor\s17\r\037mon\s17\r,
20028 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
20029 smso=\037att e\r, use=tek4025-17,
20030 tek4025-ex|tek4027-ex|Tektronix 4025/4027 w/!,
20031 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
20032 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20034 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
20035 # The following status modes are assumed for normal operation (replace the
20036 # initial "!" by whatever the current command character is):
20037 # !COM 29 # NOTE: changes command character to GS (^])
20043 # ^]STO 9 17 25 33 41 49 57 65 73
20044 # Other modes may be set according to communication requirements.
20045 # If the command character is inadvertently changed, termcap can't restore it.
20046 # Insert-character cannot be made to work on both top and bottom rows.
20047 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
20048 # There also seems to be a problem with vertical motion, perhaps involving
20049 # delete/insert-line, following a typed carriage return. This terminal sucks.
20050 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20051 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
20052 # work any more. -- esr)
20053 tek4025a|Tektronix 4025A,
20054 OTbs, OTpt, am, bw, da, db, xon,
20055 cols#80, it#8, lines#34,
20056 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
20057 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
20058 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
20059 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
20060 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
20061 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
20062 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
20063 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
20064 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
20065 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
20066 \s33\s41\s49\s57\s65\s73\035wor\s0;,
20068 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
20069 # Here's the command file that I use to get rogue to work on the 4025.
20070 # It should work with any program using the old curses (e.g. it better
20071 # not try to scroll, or cursor addressing won't work. Also, you can't
20073 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
20074 tek4025-cr|Tektronix 4025 for curses and rogue,
20076 cols#80, it#8, lines#33,
20077 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
20078 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
20079 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20080 rmcup=\037wor 0, smcup=\037wor 33h,
20081 # next two lines commented out since curses only allows 128 chars, sigh.
20082 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
20083 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
20084 tek4025ex|4025ex|4027ex|Tektronix 4025 w/!,
20085 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
20087 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20088 tek4105|Tektronix 4105,
20089 OTbs, am, mir, msgr, ul, xenl, xt,
20090 cols#79, it#8, lines#29,
20091 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
20092 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
20093 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
20094 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20095 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
20096 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
20097 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
20098 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
20099 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
20100 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20101 smul=\E[=5;<2m, tbc=\E[1g,
20103 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
20104 tek4105-30|Tektronix 4015 emulating 30 line VT100,
20107 cub1=^H, cud1=\n, cuf1=\E[C$<2>, cuu1=\E[A$<2>, kcub1=\EOD,
20108 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmam=\E[?7l,
20109 rmkx=\E[?1l\E>, rmso=\E[m$<2>, smam=\E[?7h,
20110 smkx=\E[?1h\E=, use=ansi+csr, use=ansi+local,
20111 use=vt100+4bsd, use=vt100+fnkeys,
20113 # Tektronix 4105 from BRL
20114 # The following setup modes are assumed for normal operation:
20115 # CODE ansi CRLF no DABUFFER 141
20116 # DAENABLE yes DALINES 30 DAMODE replace
20117 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
20118 # FLAGGING input INSERTREPLACE replace LFCR no
20119 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
20120 # SELECTCHARSET G1 0 TABS -2
20121 # Other setup modes may be set for operator convenience or communication
20122 # requirements; I recommend
20123 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20124 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20125 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20126 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
20127 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20128 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
20130 # and factory color maps. After setting these modes, save them with NVSAVE. No
20131 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20132 # "IC" cannot be used in combination with "im" & "ei".
20133 # "tek4105a" is just a guess:
20134 tek4105a|Tektronix 4105 (BRL),
20135 OTbs, OTpt, msgr, xon,
20136 OTkn#8, cols#80, lines#30, vt#3,
20137 acsc=, bel=^G, blink=\E[5m, bold=\E[1m,
20138 civis=\E%!0\ETD00\E%!1, cnorm=\E%!0\ETD10\E%!1, cr=\r,
20139 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
20140 cvvis=\E%!0\ETD70\E%!1, dch=\E[%p1%dP, dch1=\E[P,
20141 ech=\E[%p1%dX, home=\E[H, ind=\n, is2=\E%!1, kbs=^H,
20142 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20143 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20144 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20145 ll=\E[30;H, nel=\EE, rev=\E[7m, ri=\EM, rmacs=^O,
20146 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20147 rmso=\E[m, rmul=\E[m,
20148 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20149 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
20150 \E[?7;8h\E[r\E[m\E>,
20151 sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20152 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, use=ansi+csr,
20153 use=ansi+erase, use=ansi+idl, use=ansi+inittabs,
20154 use=ansi+local, use=ecma+index,
20156 # Tektronix 4106/4107/4109 from BRL
20157 # The following setup modes are assumed for normal operation:
20158 # CODE ansi COLUMNMODE 80 CRLF no
20159 # DABUFFER 141 DAENABLE yes DALINES 32
20160 # DAMODE replace DAVISIBILITY yes ECHO no
20161 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
20162 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
20163 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
20165 # Other setup modes may be set for operator convenience or communication
20166 # requirements; I recommend
20167 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20168 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20169 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20170 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
20171 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20172 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
20174 # and factory color maps. After setting these modes, save them with NVSAVE. No
20175 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20176 # "IC" cannot be used in combination with "im" & "ei".
20177 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
20179 cols#80, lines#32, vt#3,
20180 acsc=, bel=^G, blink=\E[5m, bold=\E[1m,
20181 civis=\E%!0\ETD00\E%!1, cnorm=\E%!0\ETD10\E%!1, cr=\r,
20182 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
20183 cvvis=\E%!0\ETD70\E%!1, dch=\E[%p1%dP, dch1=\E[P,
20184 ech=\E[%p1%dX, home=\E[H, ind=\n, is2=\E%!1, kbs=^H,
20185 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20186 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20187 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20188 ll=\E[32;H, nel=\EE, rev=\E[7m, ri=\EM, rmacs=^O,
20189 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20190 rmso=\E[m, rmul=\E[m,
20191 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20192 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
20193 ;5l\E[?7;8h\E[r\E[m\E>,
20194 sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20195 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, use=ansi+csr,
20196 use=ansi+erase, use=ansi+idl, use=ansi+inittabs,
20197 use=ansi+local, use=ecma+index,
20200 # TEK Programmer's Reference
20201 # Part No. 070-4893-00
20203 # 4107/4109 Computer Display Terminal
20206 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
20207 # 0 selects Tek mode, i.e., \E%!0
20208 # 1 selects ANSI mode
20209 # 2 selects ANSI edit-mode
20210 # 3 selects VT52 mode
20212 # One odd thing about the description (which has been unchanged since the 90s)
20213 # is that the cursor addressing is using VT52 mode, and a few others use the
20214 # VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
20215 # the developer used Emacs, which misuses cvvis (this description sets VT52
20216 # mode in that capability).
20217 tek4107|tek4109|Tektronix terminals 4107 4109,
20218 OTbs, am, mir, msgr, ul, xenl, xt,
20219 cols#79, it#8, lines#29,
20220 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
20221 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
20222 cub1=^H, cud1=\n, cuf1=\EC,
20223 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
20224 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
20225 kbs=^H, rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
20226 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
20227 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
20228 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
20229 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
20230 smul=\E%!1\E[4m$<2>\E%!0, use=vt52+arrows,
20231 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
20232 # see the note attached to tek4207.
20233 tek4207-s|Tektronix 4207 with sysline but no memory,
20235 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
20236 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20237 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20238 is2=\E7\E[?6l\E[2K\E[?6h\E8,
20239 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
20241 # The 4110 series may be a wonderful graphics series, but they make the 4025
20242 # look good for screen editing. In the dialog area, you can't move the cursor
20243 # off the bottom line. Out of the dialog area, ^K moves it up, but there
20244 # is no way to scroll.
20246 # Note that there is a floppy for free from Tek that makes the
20247 # 4112 emulate the VT52 (use the VT52 termcap). There is also
20248 # an expected enhancement that will use ANSI standard sequences.
20250 # 4112 in non-dialog area pretending to scroll. It really wraps
20251 # but vi is said to work (more or less) in this mode.
20253 # 'vi' works reasonably well with this entry.
20255 otek4112|o4112-nd|otek4113|otek4114|Tektronix 4110 series (old),
20258 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
20259 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
20260 # The 4112 with the ANSI compatibility enhancement
20261 tek4112|tek4114|Tektronix 4110 series,
20264 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
20265 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
20266 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
20267 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
20268 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20269 tek4112-nd|Tektronix 4112 not in dialog area,
20271 cuu1=^K, use=tek4112,
20272 tek4112-5|Tektronix 4112 in 5 line dialog area,
20273 lines#5, use=tek4112,
20274 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
20275 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
20276 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
20277 # previously \0410 and \0411 sequences...I don't *think* they were supposed
20278 # to be 4-digit octal -- esr)
20279 tek4113|Tektronix 4113 color graphics with 5 line dialog area,
20282 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
20283 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20285 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
20286 tek4113-34|Tektronix 4113 color graphics with 34 line dialog area,
20288 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
20289 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
20290 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
20291 # :vb: needs enough delay to let you see the background color being toggled.
20292 tek4113-nd|Tektronix 4113 color graphics with no dialog area,
20294 cols#80, it#8, lines#34,
20295 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
20297 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20299 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
20300 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
20301 # This entry is from Tek. Inc. (Brian Biehl)
20302 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
20303 otek4115|Tektronix 4115 (old),
20304 OTbs, am, da, db, eo,
20305 cols#80, it#8, lines#34,
20306 cbt=\E[Z, clear=\E[H\E[2J,
20307 cnorm=\E%!0\ELBG8\E%!1\E[34;1H,
20308 cup=\E[%i%p1%d;%p2%dH, cvvis=\E%!0\ELBB2\E%!1,
20309 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20310 if=/usr/share/tabset/vt100, il1=\E[L,
20311 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
20312 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
20313 kbs=^H, ri=\EM, rmam=\E[?7l,
20314 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
20315 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
20316 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
20317 smul=\E[4m, use=ansi+local1,
20318 tek4115|Tektronix 4115 entry with more ANSI capabilities (new),
20321 bel=^G, cr=\r, cub1=^H, cud1=\n, dch1=\E[P, ich=\E[%p1%d@,
20322 ich1=\E[@, ind=\n, kcuu1=\E[A, rmam=\E[?7l, sgr0=\E[m,
20323 smam=\E[?7h, use=ansi+arrows, use=ansi+cup,
20324 use=ansi+erase, use=ansi+idl, use=ansi+local,
20325 use=ansi+rep, use=ansi+rca, use=ansi+sgrbold,
20328 # The tek4125 emulates a VT100 incorrectly - the scrolling region
20329 # command is ignored. The following entry replaces <csr> with the needed
20330 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
20331 # chokes on; and adds a lot of initialization for the Tektronix dialog area.
20332 # Note that this entry uses all 34 lines and sets the cursor color to green.
20333 # Steve Jacobson 8/85
20334 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
20335 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
20336 tek4125|Tektronix 4125,
20338 csr@, dl1=\E[1M, il1=\E[1L,
20339 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
20340 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
20342 rc@, sc@, smkx=\E=, use=vt100+4bsd,
20344 # From: <jcoker@ucbic>
20345 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
20346 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
20347 # note that if jcoker wasn't confused you may be able to use this one.
20348 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
20349 tek4207|Tektronix 4207 graphics terminal with memory,
20350 am, bw, mir, msgr, ul, xenl,
20351 cols#80, it#8, lines#32,
20352 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
20353 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20354 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
20355 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
20356 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
20357 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20358 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20359 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
20360 rev=\E[7m, ri=\E[T,
20361 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
20362 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
20363 smul=\E[4m, tbc=\E[1g,
20365 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
20366 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
20367 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
20368 tek4404|Tektronix 4404,
20370 cols#80, it#8, lines#32,
20371 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cub1=^H, cud1=\n,
20372 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20373 dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I,
20374 il1=\E[1L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20375 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
20376 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sgr0=\E[m,
20377 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
20378 smkx=\E[?1l, smso=\E[7m, smul=\E[4m, use=ansi+csr,
20380 # Some unknown person wrote:
20381 # I added the is string - straight Unix has ESC ; in the login
20382 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
20383 # mode). The is string here cleans up a few things (but not
20385 ct8500|Tektronix ct8500,
20388 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
20389 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
20390 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
20391 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
20392 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
20394 # Tektronix 4205 terminal.
20396 # am is not defined because the wrap around occurs not when the char.
20397 # is placed in the 80'th column, but when we are attempting to type
20398 # the 81'st character on the line. (esr: hmm, this is like the VT100
20399 # version of xenl, perhaps am + xenl would work!)
20401 # Bold, dim, and standout are simulated by colors and thus not allowed
20402 # with colors. The Tektronix color table is mapped into the RGB color
20403 # table by setf/setb. All colors are reset to factory specifications by oc.
20404 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
20405 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
20406 # interval then maps into pre-defined value.
20407 tek4205|Tektronix 4205,
20409 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
20410 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20411 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
20412 clear=\E[2J\E[H, cr=\r, cup=\E[%i%p1%d;%p2%dH,
20413 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
20414 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
20415 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
20417 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
20418 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
20419 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
20420 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
20421 1%e%p2%{875}%<%tE:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
20422 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
20423 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE:%eF4%;%?%p4%{125}%<
20424 %t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8
20425 %e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE:%eF
20427 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
20428 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
20429 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
20431 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
20433 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
20434 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
20435 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20436 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20438 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20439 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20441 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
20442 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20443 smul=\E[4m, tbc=\E[1g, use=ansi+local,
20445 #### Teletype (tty)
20447 # These are the hardcopy Teletypes from before AT&T bought the company,
20448 # clattering electromechanical dinosaurs in Bakelite cases that printed on
20449 # pulpy yellow roll paper. If you remember these you go back a ways.
20450 # Teletype-branded VDTs are listed in the AT&T section.
20452 # The earliest UNIXes were designed to use these clunkers; nroff and a few
20453 # other programs still default to emitting codes for the Model 37.
20456 tty33|tty35|model 33 or 35 teletype,
20459 bel=^G, cr=\r, cud1=\n, ind=\n,
20460 tty37|model 37 teletype,
20462 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
20465 # There are known to be at least three flavors of the tty40, all seem more
20466 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
20467 # awful braindamage, such as printing a visible newline indicator after each
20468 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
20469 # braindamaged but has hope and is described here. The 40-4 is a 3270
20470 # lookalike and beyond hope. The terminal has visible bell but I don't know
20471 # it - it's null here to prevent it from showing the BL character.
20472 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
20473 # a "newline" style terminal (-crmode) vi figures all it needs is nl
20474 # to get crlf, even if <cr> is not ^M.)
20475 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
20476 tty40|ds40|ds40-2|dataspeed40|Teletype dataspeed 40/2,
20479 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
20480 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
20481 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
20482 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
20483 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
20484 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
20485 tty43|model 43 teletype,
20486 OTbs, am, hc, os, xon,
20488 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20493 # You can add <is2=\E<> to put this 40-column mode, though I can't
20494 # for the life of me think why anyone would want to.
20495 scanset|sc410|sc415|Tymshare Scan Set,
20498 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
20499 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20500 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, mc0=\E;3, mc4=\E;0,
20501 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
20504 #### Volker-Craig (vc)
20506 # If you saw a Byte Magazine cover with a terminal on it during the early
20507 # 1980s, it was probably one of these. Carl Helmers liked them because
20508 # they could crank 19.2 and were cheap (that is, he liked them until he tried
20509 # to program one...)
20512 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
20513 # every other linefeed.
20514 vc303|vc103|vc203|Volker-Craig 303,
20517 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20518 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
20519 kcuu1=^N, ll=\017$<1>W,
20520 vc303a|vc403a|Volker-Craig 303a,
20521 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
20522 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
20523 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
20524 vc404|Volker-Craig 404,
20527 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20528 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20529 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
20530 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
20531 vc404-s|Volker-Craig 404 w/standout mode,
20532 cud1=\n, rmso=^O, smso=^N, use=vc404,
20533 # From: <wolfgang@cs.sfu.ca>
20534 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
20535 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
20538 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
20539 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
20540 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
20541 ich1=\E:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
20542 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
20543 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
20544 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
20545 rmso=\E^_, smso=\E^Y,
20546 vc415|Volker-Craig 415,
20547 clear=^L, use=vc404,
20549 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
20552 #### IBM PC and clones
20555 # The pcplot IBM-PC terminal emulation program is really messed up. It is
20556 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
20557 # doesn't support scrolling regions, ignores add line commands, and ignores
20558 # delete line commands. Consequently, the resulting behavior looks like a
20559 # crude adm3a-type terminal.
20560 # Steve Jacobson 8/85
20561 pcplot|pc-plot terminal emulation program,
20563 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
20564 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
20565 # I've found that my KayPro II, running MDM730, continues to emulate an
20566 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
20567 # system the following termcap entry works well:
20568 # I have noticed a couple of minor glitches, but nothing I can't work
20569 # around. (I added two capabilities from the BRL entry -- esr)
20570 kaypro|kaypro2|kaypro II,
20573 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
20574 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
20575 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
20577 # From IBM, Thu May 5 19:35:27 1983
20578 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
20579 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
20582 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
20583 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
20585 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
20586 OTbs, am, bw, eo, hs, km, msgr, ul,
20587 cols#80, it#8, lines#24,
20588 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
20590 bel=^G, clear=\Ec, cr=\r, cup=\E[%i%p1%d;%p2%dH,
20591 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
20592 hpa=\E[%i%p1%dG, ind=\E[S\E[B, indn=\E[%p1%dS\E[%p1%dB,
20593 invis=\E[30;40m, kcbt=^], kdch1=^?, kend=\E[Y, kf1=\240,
20594 kf10=\251, kf2=\241, kf3=\242, kf4=\243, kf5=\244, kf6=\245,
20595 kf7=\246, kf8=\247, kf9=\250, kich1=\E[^H, knp=\E[U,
20596 kpp=\E[V, ll=\E[24;1H, nel=\r, rev=\E[7m, ri=\E[T\E[A,
20597 rin=\E[%p1%dT\E[%p1%dA,
20598 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20600 sgr0=\E[m, use=ansi+arrows, use=ansi+local,
20605 # Apple II firmware console first, then various 80-column cards and
20606 # terminal emulators. For two cents I'd toss all these in the UFO file
20607 # along with the 40-column apple entries.
20610 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
20611 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
20612 # function of TIC, not the firmware.
20613 # The clear key on a IIgs will do something like clear-screen,
20614 # depending on what you're in.
20615 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
20616 OTbs, am, bw, eo, msgr,
20617 cols#80, it#8, lines#24,
20618 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
20619 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20620 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
20621 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
20623 # Apple //e with 80-column card, entry from BRL
20624 # The modem interface is permitted to discard LF (maybe DC1), otherwise
20625 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
20626 # Auto-wrap does not work right due to newline scrolling delay, which also
20627 # requires that you set "stty cr2".
20628 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
20629 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
20630 # using a terminal emulation program instead of the built-in firmware.
20634 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
20635 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
20636 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
20637 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20639 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
20640 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
20641 apple2e-p|Apple //e via Pascal,
20642 cup=\036%p2%{32}%+%c%p1%{32}%+%c, use=apple2e,
20643 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
20644 # Enable DC3/DC1 flow control with "stty ixon -ixany".
20645 apple-ae|ASCII Express,
20646 OTbs, am, bw, msgr, nxon, xon,
20647 cols#80, it#8, lines#24,
20648 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20649 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20650 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
20651 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20653 appleII|Apple II plus,
20655 cols#80, it#8, lines#24,
20656 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
20657 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
20658 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
20659 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
20660 # Originally by Gary Ford 21NOV83
20661 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
20662 apple-80|Apple II with smarterm 80 col,
20665 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
20666 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
20667 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
20668 apple-soroc|Apple emulating Soroc 120,
20671 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20672 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
20673 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
20674 # From Peter Harrison, Computer Graphics Lab, San Francisco
20675 # ucbvax!ucsfmis!harrison .....uucp
20676 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
20677 # "These two work. If you don't have the inverse video chip for the
20678 # Apple with videx then remove the :so: and :se: fields."
20679 # (apple-videx: this used to be called DaleApple -- esr)
20680 apple-videx|Apple with videx videoterm 80 column board with inverse video,
20682 cols#80, it#8, lines#24,
20683 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
20684 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20685 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
20686 rmso=^Z2, sgr0=^Z2, smso=^Z3,
20687 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
20688 # Apple Cat ][ 212 modem, + more all
20689 # controlled by ASCII Express: Pro.
20690 # From Dave Shaver <isucs1!shaver>
20691 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
20694 acsc=, clear=^L, cuf1=^\,
20695 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20696 flash=^W35^W06, home=^Y,
20697 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
20699 apple-uterm|Ultraterm for Apple micros,
20702 acsc=, clear=^L, cuf1=^\,
20703 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20704 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
20705 # from trwrba!bwong (Bradley W. Wong):
20707 # This entry assumes that you are using an apple with the UCSD Pascal
20708 # language card. SYSTEM.MISCINFO is assumed to be the same as that
20709 # supplied with the standard apple except that screenwidth should be set
20710 # using SETUP to 80 columns. Note that the right arrow is not mapped in
20711 # this termcap entry. This is because that key, on the Apple, transmits
20712 # a ^U and would thus preempt the more useful "up" function of vi.
20715 apple80p|80-column apple with Pascal card,
20718 clear=^Y^L, cuf1=^\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20719 cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H,
20721 # Apple II+ equipped with Videx 80 column card
20723 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
20724 # manually converted by D A Gwyn
20726 # DO NOT use any terminal emulation with this data base, it works directly
20727 # with the Videx card. This has been tested with vi 1200 baud and works fine.
20729 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
20730 # 1 screen, while in R2 ^U doesn't.
20731 # For inverse alternate character set add:
20732 # <smacs>=^O:<rmacs>=^N:
20733 # (apple-v: added it#8 -- esr)
20734 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
20736 cols#80, it#8, lines#24,
20737 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
20738 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20739 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
20740 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
20741 khome=^Y, rmso=^Z2, smso=^Z3,
20742 apple-videx3|vapple|Apple II with 80 col card,
20745 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
20746 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
20747 home=\EH, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
20748 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
20750 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
20751 aepro|Apple II+ running ASCII Express Pro--vt52,
20754 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
20755 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20757 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
20758 apple-vm80|ap-vm80|Apple with viewmax-80,
20761 clear=\014$<300/>, cuf1=^\:,
20762 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
20763 ed=\013$<300/>, el=^], home=\031$<200/>,
20765 #### Apple Lisa & Macintosh
20768 # (lisa: changed <cvvis> to <cnorm> -- esr)
20769 lisa|Apple Lisa console display (black on white),
20770 OTbs, am, eo, msgr,
20771 cols#88, it#8, lines#32,
20772 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
20773 cnorm=\E[5l, cub1=^H, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P,
20774 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20775 il1=\E[L, is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20776 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20777 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
20779 liswb|Apple Lisa console display (white on black),
20780 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
20781 smso=\E[m, smul=\E[4m, use=lisa,
20783 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
20784 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
20786 # These entries assume that the 'Auto Wraparound' is enabled.
20787 # Xon-Xoff flow control should also be enabled.
20789 # The VT100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
20790 # settings are in non-volatile memory and don't need to be reset upon login.
20791 # Also setting the number of columns glitches the screen annoyingly.
20792 # You can type "reset" to get them set.
20794 lisaterm|Apple Lisa or Lisa/2 running LisaTerm VT100 emulation,
20795 OTbs, OTpt, am, xenl, xon,
20796 OTkn#4, cols#80, it#8, lines#24, vt#3,
20797 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
20798 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K,
20799 home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
20800 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
20801 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rev=\E[7m,
20802 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20803 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
20804 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
20805 tbc=\E[3g, use=ansi+csr, use=ansi+local,
20807 # Lisaterm in 132 column ("wide") mode.
20808 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
20810 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
20811 # Although MacTerminal has insert/delete line, it is commented out here
20812 # since it is much faster and cleaner to use the "lock scrolling region"
20813 # method of inserting and deleting lines due to the MacTerminal implementation.
20814 # Also, the "Insert/delete ch" strings have an extra character appended to them
20815 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
20816 # supported by MacTerminal.
20817 mac|macintosh|Macintosh with MacTerminal,
20820 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
20821 # Lisaterm in 132 column ("wide") mode.
20822 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
20825 #### Radio Shack/Tandy
20828 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
20829 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
20830 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
20831 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
20833 cols#80, it#8, lines#24,
20834 bel=^G, blink=^_", bold=\E:^A, civis=^E\s,
20835 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
20836 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
20837 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
20838 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
20839 sgr0=\037!\E:\0, smso=^_\s, smul=^_",
20840 # (trs2: removed obsolete ":nl=^_:" -- esr)
20841 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
20843 cols#80, it#8, lines#24,
20844 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
20845 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
20846 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
20847 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
20848 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
20849 # (This had extension capabilities
20850 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
20851 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
20852 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
20853 trs16|trs-80 model 16 console,
20855 cols#80, it#8, lines#24,
20856 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
20857 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20858 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20859 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20860 ind=\n, kbs=^H, kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P,
20861 kf6=^N, kf7=^S, khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5,
20862 lf5=f6, lf6=f7, lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg,
20863 rmso=\ER@, sgr0=\ER@, smacs=\ERG, smso=\ERD,
20866 #### Commodore Business Machines
20868 # Formerly located in West Chester, PA; went spectacularly bust in 1994
20869 # after years of shaky engineering and egregious mismanagement. Made one
20870 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
20871 # C-128, VIC-20). The C-64 is said to have been the most popular machine
20872 # ever (most units sold); they can still be found gathering dust in closets
20876 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
20877 # Added a few more entries, converted caret-type control sequence (^x) entries
20878 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
20879 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
20881 # :as:, :ae: Support for alternate character sets.
20882 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
20883 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
20884 # This one appears to fix a problem I always had with a line ending
20885 # at 'width+1' (I think) followed by a blank line in vi. The blank
20886 # line tended to disappear and reappear depending on how the screen
20887 # was refreshed. Note that this is probably needed only if you use
20888 # something like a Dnet Fterm with the window sized to some peculiar
20889 # dimension larger than 80 columns.
20890 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
20891 # (amiga: removed obsolete :kn#10:,
20892 # also added empty <acsc> to suppress a warning --esr)
20894 OTbs, am, bw, xenl,
20896 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
20897 civis=\E[0 p, cnorm=\E[ p, cup=\E[%i%p1%d;%p2%dH,
20898 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, home=\E[H,
20899 ich=\E[%p1%d@, ich1=\E[@, ind=\E[S, invis=\E[8m,
20900 is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20901 kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, kf3=\E[2~,
20902 kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, kf8=\E[7~,
20903 kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O, rmso=\E[m,
20904 rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m,
20905 smul=\E[4m, use=ansi+erase, use=ansi+idl, use=ansi+local,
20908 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
20909 # (amiga: added empty <acsc> to suppress a warning.
20910 # I'm told this entry screws up badly with AS225, the Amiga
20911 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
20912 amiga-h|Hans Verkuil's Amiga ANSI,
20915 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
20916 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
20917 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
20918 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
20919 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
20920 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
20921 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
20922 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
20923 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20924 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
20925 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
20926 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
20927 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
20928 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
20929 smso=\2337m, smul=\2334m,
20931 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
20933 # Pavel Fedin added
20938 amiga-8bit|Amiga ANSI using 8-bit controls,
20939 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20940 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
20941 kpp=\233T, ri=\215, rin@, use=amiga-h,
20943 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
20944 # requires use of appropriate preferences settings.
20945 amiga-vnc|Amiga using VNC console (black on light gray),
20946 am, da, db, msgr, ndscr,
20947 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
20948 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
20949 cnorm=\E[p\E[>?6l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20950 cup=\E[%i%p1%d;%p2%dH, cvvis=\E[>?6h, dch=\E[%p1%dP,
20951 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, flash=^G,
20952 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
20954 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20955 kcbt=\233Z, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
20956 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
20957 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
20958 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
20959 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
20960 rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
20961 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20962 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
20963 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
20964 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
20965 smso=\E[1m, smul=\E[4m, use=ansi+arrows, use=ansi+erase,
20966 use=ansi+local, use=ecma+index,
20968 # MorphOS on Genesi Pegasos
20969 # By Pavel Fedin <sonic_amiga@rambler.ru>
20970 morphos|MorphOS on Genesi Pegasos,
20971 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20972 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
20973 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
20974 ri=\215, rin@, use=amiga-h,
20976 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
20977 # I'm trying to write a termcap for a commodore b-128, and I'm
20978 # having a little trouble. I've had to map most of my control characters
20979 # to something that unix will accept (my delete-char is a ctrl-t, etc),
20980 # and create some functions (like cm), but thats life.
20981 # The problem is with the arrow keys - right, and up work fine, but
20982 # left deletes the previous character and down I just can't figure out.
20983 # Jove knows what I want, but I don't know what it's sending to me (it
20984 # isn't thats bound to next-line in jove).
20985 # Anybody got any ideas? Here's my termcap.
20986 # DAG -- I changed his "^n" entries to "\n"; see if that works.
20988 commodore|b-128|Commodore B-128 micro,
20990 OTdN#20, cols#80, lines#24, pb#150,
20991 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
20992 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
20993 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
20994 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
20995 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
21000 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
21001 northstar|North Star Advantage,
21005 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
21006 el=\016$<200/>, home=\034\032$<200/>,
21010 # Thu Jul 7 03:55:16 1983
21012 # As an aside, be careful; it may sound like an anomaly on the
21013 # Osborne, but with the 80-column upgrade, it's too easy to
21014 # enter lines >80 columns!
21016 # I've already had several comments...
21017 # The Osborne-1 with the 80-col option is capable of being
21018 # 52, 80, or 104 characters wide; default to 80 for compatibility
21019 # with most systems.
21021 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
21022 osborne-w|osborne1-w|Osborne I in 104-column mode,
21024 cols#104, lines#24,
21025 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21026 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21027 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
21028 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
21029 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
21030 osborne|osborne1|Osborne I in 80-column mode,
21031 OTbs, am, mir, msgr, ul, xhp,
21032 OTdB#4, cols#80, lines#24,
21033 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
21034 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
21035 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
21036 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
21037 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
21039 # Osborne Executive definition from BRL
21040 # Similar to tvi920
21041 # Added by David Milligan and Tom Smith (SMU)
21042 osexec|Osborne executive,
21044 OTug#1, cols#80, lines#24, xmc#1,
21045 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21046 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21047 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
21048 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
21049 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
21050 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
21051 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
21054 #### Console types for obsolete UNIX clones
21056 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
21057 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
21058 # were commercial, Minix an educational tool sold in conjunction with a book.
21059 # Memory-segmentation limits and a strong tendency to look like V7 long after
21060 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
21061 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
21062 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
21063 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
21064 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
21065 # even as single processes under SunOS and the Macintosh OS.
21069 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
21070 minix|minix console (v3),
21072 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
21073 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
21074 \301w\302x\263y\363z\362{\343|\330}\234~\376,
21075 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
21076 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
21077 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
21078 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
21079 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
21080 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
21081 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
21082 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
21083 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
21084 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
21085 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
21086 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
21087 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
21090 minix-3.0|minix console (v3.0),
21091 use=ecma+color, use=minix-1.7,
21094 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
21095 # This matches the entry provided with minix 1.7.4, with bogus :ri: removed.
21096 minix-1.7|minix console (v1.7),
21098 el1=\E[2K, is2=\E[0m, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
21099 lf4=Num -, lf5=Num 5, use=minix-1.5,
21100 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
21101 minix-old|minix-1.5|minix console (v1.5),
21103 cols#80, it#8, lines#25,
21104 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
21105 cub1=^H, cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
21106 ed=\E[0J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
21107 ich1=\E[@, ind=\n, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T,
21108 kf4=\E[S, kf5=\E[G, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
21109 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
21110 use=ansi+arrows, use=ansi+idl, use=ansi+local,
21112 # The linewrap option can be specified by editing /usr/include/minix/config.h
21113 # before recompiling the minix 1.5 kernel.
21114 minix-old-am|minix console with linewrap,
21117 pc-minix|minix console on an Intel box,
21118 use=klone+acs, use=minix-3.0,
21120 # According to the Coherent 2.3 manual, the PC console is similar
21121 # to a z19. The differences seem to be (1) 25 lines, (2) no status
21122 # line, (3) standout is broken, (4) ins/del line is broken, (5)
21123 # has blinking and bold.
21124 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
21126 cols#80, it#8, lines#25,
21127 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21128 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
21129 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, khome=\EH,
21130 ri=\EI, rmir=\EO, rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
21133 # According to the Venix 1.1 manual, the PC console is similar
21134 # to a DEC VT52. Differences seem to be (1) arrow keys send
21135 # different strings, (2) enhanced standout, (3) added insert/delete line.
21136 # Note in particular that it doesn't have automatic margins.
21137 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
21138 # not described here because this derives from an old termcap entry.
21139 pc-venix|venix|IBM PC console running Venix,
21140 cols#80, it#8, lines#25,
21141 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21142 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21143 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
21144 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
21146 #### Miscellaneous microcomputer consoles
21148 # If you know anything more about any of these, please tell me.
21151 # The MAI Basic Four computer was obsolete at the end of the 1980s.
21152 # It may be used as a terminal by putting it in "line" mode as seen on
21153 # one of the status lines.
21154 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
21155 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
21156 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
21157 # used \ED instead.
21158 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
21159 mai|basic4|MAI Basic Four in ANSI mode,
21160 am, da, db, mir, msgr,
21161 cols#82, it#8, lines#25,
21162 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
21163 cr=\r, cub1=^H, cud1=\n, cuf1=^X, cup=\E[%i%p1%d;%p2%dH,
21164 cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, dl1=\E[M, ed=^_, el=^^,
21165 home=^], ht=^I, if=/usr/share/tabset/vt100, il1=\E[L,
21167 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
21168 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21169 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21170 kf7=\EOV, kf8=\EOW, nel=\r\ED, rev=\E[7m, ri=\E[T,
21171 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smir=\E[4h,
21172 smso=\E[7m, smul=\E[4m, use=ansi+csr,
21174 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
21175 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
21177 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
21178 # The Basis 108 was a Apple II clone, manufactured by the "Basis
21179 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
21180 # about 1,5 km from where I live, but doesn't build own computers any
21181 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
21182 # equipped with one or two 5.25" disk drives, had a monochrome and colour
21183 # video output for a TV set or a dedicated monitor and several slots for
21184 # Apple II cards. Basis 108 were quite popular at german schools before
21185 # the advent of the IBM PC. They run, for example, the UCSD Pascal
21186 # development system (which I used even in 1993 to program the steering
21187 # and data recording for our school's experimental solar panel :), Apple DOS
21189 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
21190 basis|BASIS108 computer with terminal translation table active,
21191 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
21192 rmso=\E), sgr0=\E), smso=\E(, use=adm3a,
21193 # luna's BMC terminal emulator
21194 luna|luna68k|LUNA68K Bitmap console,
21195 cols#88, lines#46, use=ansi-mini,
21196 megatek|pegasus workstation terminal emulator,
21199 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
21200 # interface (pre-Macintosh by several years) that went nowhere.
21201 xerox820|x820|Xerox 820,
21204 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21205 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
21208 #### Videotex and teletext
21211 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
21212 # \E[?3l 80 columns
21213 # \E[?4l scrolling on
21214 # \E[12h local echo off
21215 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
21216 # \E)0 G1 DEC set (line graphics)
21218 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
21219 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
21220 OTbs, eslok, hs, xenl,
21221 cols#80, it#8, lines#24, wsl#72, xmc#0,
21222 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
21223 blink=\E[5m, bold=\E[1m, civis=\E[<1h, cnorm=\E[<1l, cr=\r,
21224 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
21225 flash=^G, fsl=\n, home=\E[H, ht=^I, ind=\n, ip=$<7/>,
21226 is1=\E:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
21227 is3=\E[?3l, kclr=\E[2J, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
21228 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21229 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, kich1=\E[4h,
21230 kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, mc0=\E[i,
21231 nel=\r\n, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
21232 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E[?4l\E[12h,
21233 rs2=\Ec\E)0, sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m,
21234 smul=\E[4m, tsl=^_@A, use=ansi+arrows, use=ansi+cpr,
21235 use=ansi+csr, use=ansi+erase, use=ansi+idl,
21238 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
21240 minitel1|minitel 1,
21241 am, bw, eslok, hs, hz, .msgr, G0,
21242 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
21243 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
21244 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21245 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
21246 dsl=\037@A\030\n, el=^X,
21247 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
21248 home=^^, ind=\n, is2=\E;`ZQ\E:iC\E:iE\021, kbs=^SG,
21249 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
21250 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
21251 rev=\E], ri=^K, rmso=\E\\,
21252 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21253 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21254 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
21256 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
21257 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
21258 %tC%e%p1%'@'%+%c%;,
21259 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
21260 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
21261 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
21262 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
21263 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
21264 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
21266 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
21267 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
21268 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
21269 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
21270 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
21271 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
21272 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
21273 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
21274 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
21275 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
21276 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
21277 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
21278 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
21280 minitel1b|minitel 1-bistandard (in 40cols mode),
21282 cub1=^H, cud1=\n, cuf1=^I, cuu1=^K, dch=\E[%p1%dP, dch1=\E[P,
21283 ed=\E[J, el1=\E[1K, is1=\E;iYA\E;jYC, kbs@, kcan@,
21284 kclr=\E[2J, kctab=^I, kdch1=\E[P, kdl1=\E[M, kent@, kf1=^SD,
21285 kf10=^Y0, kf11=^Y1, kf12=^Y/, kf13=^Y{1, kf14=^Y{2,
21286 kf15=^Y{3, kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7,
21287 kf2=^SC, kf20=^Y{8, kf21=^Y{9, kf22=^Y{0, kf23=^Y{*,
21288 kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG, kf6=^SE, kf7=^Y8,
21289 kf8=^Y\,, kf9=^Y., khlp@, kich1=\E[4h, kil1=\E[L, krfr@,
21290 lf1=Guide, lf2=Repetition, lf3=Sommaire, lf4=Envoi,
21291 lf5=Correction, lf6=Annulation, rmir=\E[4l, smir=\E[4h,
21292 u8=\001%[ABCPtuvwxyz0123456789:;<=>?]\004,
21293 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
21294 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E:|k, .rmkx=\E;jYA,
21295 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
21296 use=ansi+arrows, use=ansi+idl, use=ansi+local,
21299 # rmkx posait des problemes (logout en sortant de vi).
21300 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
21301 am@, bw@, eslok@, hz@, msgr,
21302 colors@, cols#80, it#8, pairs@,
21303 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
21304 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
21305 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21306 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
21307 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
21308 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
21309 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
21310 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21311 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
21312 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
21313 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
21315 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
21316 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
21317 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
21318 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
21320 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
21321 smso=\E[7m, smul=\E[4m,
21322 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
21323 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
21324 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
21325 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
21327 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
21328 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
21329 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
21331 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
21332 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
21333 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
21334 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
21335 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
21336 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
21337 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
21338 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
21339 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
21340 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
21341 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
21344 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
21346 bold=\EG, clear=^L\EB,
21347 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
21348 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
21349 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21350 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
21353 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
21356 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
21357 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
21358 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
21359 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
21360 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
21362 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21363 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
21364 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
21365 .u8=\001Cu|\004r, use=minitel1b,
21369 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
21371 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
21372 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
21373 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
21375 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
21376 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
21377 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
21378 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
21380 # Fonctionne par exemple avec Midnight Commander (mc).
21382 minitel2-80|minitel 2 (80cols) avec filets VT100 (DEC),
21383 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
21384 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
21385 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
21387 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21388 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
21389 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
21390 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
21391 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
21392 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
21393 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
21394 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
21395 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
21396 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
21397 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
21398 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
21399 \,+k\,.l\,0\177\,-j,
21402 minitel12-80|minitel 12 (80cols),
21403 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
21405 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
21407 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
21409 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
21411 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21412 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
21413 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
21414 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
21415 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
21416 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
21417 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
21418 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
21419 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
21420 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
21421 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
21422 \,\\\,m\,+k\,.l\,0\177\,-j,
21426 # Add these in your ~/.screenrc for inputting some special glyphs like french
21427 # accentuated chars in 40 cols mode:
21429 # bindkey ^YA digraph '`' # Saisi accent grave.
21430 # bindkey ^YB digraph "'" # Saisi accent aigu.
21431 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
21432 # bindkey ^YH digraph '"' # Saisi accent trema.
21434 # bindkey ^Y# stuff \243 # Livre.
21435 # bindkey "^Y\047" stuff \247 # Paragraphe.
21436 # bindkey ^Yj stuff \306 # AE
21437 # bindkey ^Yz stuff \346 # ae
21438 # bindkey ^YKc stuff \347 # c cedille.
21441 screen.minitel1|Screen specific for minitel1,
21443 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
21445 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
21446 rmul@, smul@, u8=\E[?1;2c, use=decid+cpr,
21447 use=xterm+x11mouse, use=screen,
21449 screen.minitel1b|Screen specific for minitel1b,
21450 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
21451 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
21452 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
21453 use=screen.minitel1,
21455 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
21456 colors@, ncv@, pairs@,
21457 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
21458 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
21459 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
21460 use=screen.minitel1b,
21462 screen.minitel1-nb|Screen specific for minitel1-nb,
21463 colors@, ncv@, pairs@,
21464 bold=\E[1m, op@, setab@, setaf@, setb@, setf@,
21465 use=screen.minitel1,
21467 screen.minitel1b-nb|Screen specific for minitel1b-nb,
21468 colors@, ncv@, pairs@,
21469 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21470 use=screen.minitel1b,
21472 # From: Alexandre Montaron, 29 Sep 2016
21474 linux-m1|Linux Minitel 1 "like" Couleurs,
21475 am, bw@, ccc, mir, msgr, xenl,
21477 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
21478 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
21479 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
21480 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
21481 el1=\E[1K, enacs=\E)U, flash=\E[?5h$<100/>\E[?5l,
21482 hpa=\E[%i%p1%d`, ht=^I, hts=\EH, ind=\n,
21483 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
21485 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
21486 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r,
21487 kdl1=\E\E[A, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
21488 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
21489 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
21490 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
21491 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
21492 khome=\E[1~, kil1=\E\E[B, kmous=\E[M, nel=\EE,
21493 oc=\E]R\E]P3FFFF80, op=\E[39;49m, rev=\E[7m, ri=\EM,
21494 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m,
21495 rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8], sgr0=\E[m,
21496 smacs=^N, smam=\E[?7h, smir=\E[4h, smpch=\E[11m,
21497 smso=\E[7m, tbc=\E[3g, vpa=\E[%i%p1%dd, .VN=\E[?5l,
21498 .VR=\E[?5h, .am@, .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H,
21499 .rmcup=, .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
21501 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21502 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21503 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21504 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21505 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21506 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21507 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21508 \n\n\n\n\n\n\n\n\n\n,
21509 use=ansi+arrows, use=ansi+csr, use=ansi+cup,
21510 use=ansi+erase, use=ansi+idl, use=ansi+local1,
21511 use=klone+color, use=vt220+pcedit, use=vt220+cvis,
21514 # 1. Using double-shapes for VT100 graphical chars (eg: mc).
21515 # 2. Native brown color corrected to good yellow color.
21516 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
21517 # 4. Suppressed nonexistent underlined mode (normally as bright).
21518 # 5. ich/ich1 not filled because of non-curses programs.
21520 # 6. Suppressed nonexistent invisible mode.
21521 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
21523 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
21525 colors@, ncv@, pairs@,
21526 acsc@, bold=\E[33m, enacs@, initc@,
21527 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
21528 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
21529 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21530 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
21531 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
21532 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
21533 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21536 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
21538 colors@, ncv@, pairs@,
21539 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21540 uvvwwxxyyzz{{||}}~~,
21541 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
21542 enacs=\E)0, initc@,
21543 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
21544 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
21545 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
21547 oc@, op@, setab=^A, setaf=^A, sgr0=\E[;37m, .setab@, .setaf@,
21548 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
21549 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
21550 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
21551 \E]PFFFFFFF\E[;37m,
21554 # From: Alexandre Montaron, 27 May 2020
21555 linux-s|Linux console with added status line at bottom,
21557 clear=\E[255;255H\E[A\E[1J\E[H, csr@,
21558 dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
21559 iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s;
21560 \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1
21561 \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE
21562 S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"',
21563 rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux,
21565 # Screen entries counterpart :
21567 screen.linux-m1|Linux m1 specific for screen,
21569 kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~, kf14=\E[26~,
21570 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
21571 kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@, smul@,
21573 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21574 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21575 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21576 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21577 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21578 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21579 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21580 \n\n\n\n\n\n\n\n\n\n,
21581 use=decid+cpr, use=xterm+x11mouse, use=screen,
21583 screen.linux-m1b|Linux m1b specific for screen,
21585 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
21587 screen.linux-m2|Linux m2 specific for screen,
21588 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21589 uvvwwxxyyzz{{||}}~~,
21590 use=screen.linux-m1b,
21594 putty-m1|Putty Minitel 1 "like" Couleurs,
21595 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21596 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21597 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21598 use=ecma+index, use=linux-m1,
21600 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
21601 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21602 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21603 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21604 use=ecma+index, use=linux-m1b,
21606 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
21607 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
21609 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21610 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21611 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21612 use=ecma+index, use=linux-m2,
21614 putty+screen|PuTTY with screen resizing extensions (building-block),
21615 .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
21617 putty-screen|PuTTY with screen resizing extensions,
21618 WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty,
21620 screen.putty-m1|Putty m1 specific for screen,
21621 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
21623 screen.putty-m1b|Putty m1b specific for screen,
21625 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
21627 screen.putty-m2|Putty m2 specific for screen,
21628 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21629 uvvwwxxyyzz{{||}}~~,
21630 use=screen.putty-m1b,
21631 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
21634 # viewdata lacks a true cup capability,
21635 # so I achieved it with home and cud1/cuf1 sequences only !
21636 viewdata|Prestel/Viewdata terminals,
21639 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
21641 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
21642 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
21643 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
21644 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
21645 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
21646 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
21647 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
21649 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
21650 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
21652 viewdata-o|optimized version of Viewdata Prestel/Viewdata terminals,
21653 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
21654 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
21655 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
21656 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
21657 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
21658 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
21659 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
21660 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
21661 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
21662 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
21663 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
21664 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
21665 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
21666 .ll=^^^K, use=viewdata,
21668 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
21670 viewdata-rv|Prestel/Viewdata terminals with reverse capabilitie (as green),
21672 rmso=\EG, smso=\EB, use=viewdata-o,
21674 ######## OBSOLETE VDT TYPES
21676 # These terminals are *long* dead -- these entries are retained for
21677 # historical interest only.
21679 #### Amtek Business Machines
21682 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
21683 # but these caps were commented out in 8.3; also, removed overridden
21684 # ":do=^J:" -- esr)
21685 abm80|amtek business machines 80,
21688 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
21689 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
21690 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
21692 #### Bell Labs blit terminals
21694 # These were AT&T's official entries. The 5620 FAQ maintained by
21695 # David Breneman <daveb@dgtl.com> has this to say:
21697 # Actually, in the beginning was the Jerq, and the Jerq was white with a
21698 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
21699 # was good. But lo, upon the horizon loomed a mighty management-type person
21700 # (known now only by the initials VP) who said, the mighty Jerq must stay
21701 # alone, and could not go forth into the world. So Locanthi and Pike put the
21702 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
21703 # world. And the Jerq lived the rest of its days in research, but never
21704 # strayed from those paths.
21706 # In all seriousness, the Blit was originally known as the Jerq, but when
21707 # it started to be shown outside of the halls of the Bell Labs Research
21708 # organization, the management powers that be decided that the name could
21709 # not remain. So it was renamed to be Blit. This was in late 1981.
21711 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
21715 blit|jerq|blit running teletype rom,
21717 cols#87, it#8, lines#72,
21718 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21719 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
21720 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
21721 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
21722 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kf1=\Ex,
21723 kf2=\Ey, kf3=\Ez, use=vt52+arrows,
21725 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
21726 cbblit|fixterm|blit running columbus code,
21728 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
21729 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
21730 smul=\EU", use=blit,
21732 oblit|ojerq|first version of blit rom,
21733 am, da, db, eo, mir, ul, xon,
21734 cols#88, it#8, lines#72,
21735 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21736 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
21737 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
21738 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
21741 #### Bolt, Beranek & Newman (bbn)
21743 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
21744 # The parent company, best known as the architects of the Internet, is
21747 # Jeff DelPapa <dp@world.std.com> writes:
21748 # The bitgraph was a large white box that contained a monochrome bitmap
21749 # display, and a 68000 to run it. You could download code and run it on
21750 # the cpu, it had 128kb (I think) of memory. I used one in the late
21751 # 70's, sure beat a VT100. It had one strange feature tho -- it used
21752 # the cpu to bitblt pixels to scroll, it took longer than the refresh
21753 # rate, and looked like a rubber sheet stretching, then snapping
21754 # upwards. It had everything the early mac had, except a floppy drive a
21755 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
21756 # Beranek and Neuman) sold at most a few hundred of them to the real
21757 # world. DOD may have bought more...
21760 # Entries for the BitGraph terminals. The problem
21761 # with scrolling in vi can only be fixed by getting BBN to put
21762 # smarter scroll logic in the terminal or changing vi or padding
21763 # scrolls with about 500 ms delay.
21765 # I always thought the problem was related to the terminal
21766 # counting newlines in its input buffer before scrolling and
21767 # then moving the screen that much. Then vi comes along and
21768 # paints lines in on the bottom line of the screen, so you get
21769 # this big white gap.
21771 bitgraph|bg2.0nv|bg3.10nv|BBN BitGraph 2.0 or later (normal video),
21772 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21774 bg2.0rv|bg3.10rv|BBn BitGraph 2.0 (reverse video),
21775 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21777 bg2.0|bg3.10|BBN BitGraph 2.0 or later (no init),
21780 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H,
21781 cup=%i\E[%p1%d;%p2%dH, dl1=\E[M$<2*>, ed=\E[J$<150>,
21782 el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, ind=\n$<280>,
21783 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
21784 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, lf2=PF2, lf3=PF3,
21785 lf4=PF4, rmkx=\E>, rmso=\E[m, sgr0=\E[m, smkx=\E=,
21786 smso=\E[7m, use=ansi+csr, use=ansi+local1,
21788 bg1.25rv|BBN BitGraph 1.25 (reverse video),
21789 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21791 bg1.25nv|BBN BitGraph 1.25 (normal video),
21792 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21794 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
21795 bg1.25|BBN BitGraph 1.25,
21797 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H,
21798 cup=%i\E[%p1%d;%p2%dH, dl1=\E[M$<2*>, ed=\E[J$<150>,
21799 el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, ind=\n$<280>, kf1=\EP,
21800 kf2=\EQ, kf3=\ER, kf4=\ES, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
21801 ll=\E[64;1H, rmam=\E[?7l, rmkx=\E>, rmso=\E[m, sgr0=\E[m,
21802 smam=\E[?7h, smkx=\E=, smso=\E[7m, use=ansi+local1,
21805 #### Bull (bq, dku, vip)
21807 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
21809 #============================================#
21810 # BULL QUESTAR 210 `SDP' terminals emulation #
21811 #============================================#
21813 # Description written by R.K.Saunders (Bull Transac)
21815 # Modifications written by F. Girard (Bull MTS)
21816 # 19-05-87 V02.00.01
21817 # 17-12-87 V02.00.02
21818 # 15-09-89 V02.00.05
21820 # Typical technical selections F1 (modes SDP/ROLL):
21821 # -------------------------------------------------------
21822 # | 01 02 03 04 05 06 07 08 09 10 |
21823 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
21825 # | 11 12 13 14 15 16 17 18 19 20 |
21826 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
21828 # | 21 22 23 24 25 26 27 28 29 30 |
21829 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
21831 # | 31 32 33 34 35 36 37 38 39 40 |
21832 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
21833 # -------------------------------------------------------
21834 # Typical firmware identification F5 "etat 6":
21835 # P287.02.04b (AZERTY)
21836 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
21837 # P298.03.03 (monochrome) or P374.03.02 (colour)
21839 # SM SDP mode (VIP command): ^[[?=h
21840 # RIS (erases screen): ^[c
21841 # DMI disable keyboard: ^[`
21842 # SM double rendition mode: ^[[?>h
21843 # RM solicited status mode: ^[[5l
21844 # RM character mode: ^[[>l
21845 # RM echoplex mode: ^[[12l
21846 # RM column tab mode: ^[[18l
21847 # RM forbid SS2 keyboard mode: ^[[?<l
21848 # SM scroll mode: ^[[=h
21849 # FCF enable XON/XOFF: ^[P1s^[\
21850 # MTL select end msg character: ^[[^Wp
21851 # EMI enable keyboard: ^[b
21852 # RIS retour etat initial: ^[c
21853 # enable FC keypad: ^[[?<h,
21854 # MPW map status line window: ^[PY99:98^[\
21855 # SCP select status line: ^[[0;98v
21856 # ED erase entire partition: ^[[2J
21857 # SCP select main partition: ^[[v
21858 # SM character insertion mode: ^[[4h
21859 # RM character replacement mode: ^[[4l
21860 # COO cursor on: ^[[r
21861 # COO cursor off: ^[[1r
21862 # SGR dim (turquoise) rev attr: ^[[2;7m
21863 # SGR Data normal attr: ^[[m
21864 # SO Line-graphic mode ON: ^N
21865 # SI Line-graphic mode OFF: ^O
21866 # MC start routing to printer: ^[[5i
21867 # MC stop routing to printer: ^M^[[4i
21870 # This entry covers the following terminals:
21871 # dku7102, tws2102, and tws models 2105 to 2112
21872 tws-generic|dku7102|Bull Questar tws terminals,
21873 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
21874 cols#80, lines#24, wsl#80,
21875 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
21876 bel=^G, blink=\E[0;5m, civis=\E[1r, clear=\E[2J,
21877 cnorm=\E[r, cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%df,
21878 dch=\E[%p1%dP, dch1=\E[P, dim=\E[0;2m,
21879 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[v, fsl=\E[v,
21880 home=\E[H, ht=\E[I, ind=\n, invis=\E[0;8m,
21881 is1=\E[?=h\Ec\E`\E[?>h\EPY99:98\E\\,
21882 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
21883 is3=\Eb\E[?<h, kcbt=\E[Z, kctab=\E[g, kdch1=\E[P,
21884 kdl1=\E[M, ked=\E[J, kel=\E[K, kf1=\E[1u\027,
21885 kf2=\E[2u\027, kf3=\E[3u\027, kf4=\E[4u\027,
21886 kf5=\E[5u\027, kf6=\E[6u\027, kf7=\E[7u\027,
21887 kf8=\E[8u\027, khts=\EH, kil1=\E[L, krmir=\E[4l,
21888 ll=\E[H\E[A, mc0=\E[0i, mc4=\r\E[4i, mc5=\E[5i,
21889 rev=\E[0;7m, rmacs=^O, rmcup=\E[0;98v\E[2J\E[v,
21890 rmir=\E[4l, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
21891 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
21892 %p7%t;8%;m%?%p9%t\016%e\017%;,
21893 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\,
21894 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m,
21895 tsl=\EPY99:98\E\\\E[0;98v\E[2;7m, use=ansi+arrows,
21896 use=ansi+erase, use=ansi+idl, use=ansi+inittabs,
21897 use=ansi+local, use=ansi+sgrdim,
21899 tws2102-sna|dku7102-sna|Bull Questar tws2102 for SNA,
21900 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
21902 tws2103|xdku|Bull Questar tws2103,
21903 ht=^I, use=tws-generic,
21904 tws2103-sna|dku7103-sna|Bull Questar tws2103 for SNA,
21905 ht=^I, use=tws2102-sna,
21906 dku7102-old|Bull Questar 200 DKU7102 (microcode version < 6),
21907 clear=\E[2J\E[H, cup@, dl@, dl1@,
21908 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
21909 il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m,
21911 dku7202|Bull Questar 200 DKU7202 (colour/character attributes),
21912 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
21913 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
21914 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
21915 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
21917 #=========================================================#
21918 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
21919 #=========================================================#
21921 # Description written by J. Staerck (BULL SA)
21922 # Copyright (c) 1989 BULL SA
21923 #---------------------------------------------------------------------------
21924 # This entry is used for terminals with VT320 emulation mode
21925 # and following set-up :
21926 # 8 bit ISO Latin Character Set (ISO 8859-1),
21927 # 7 bit Control Characters,
21928 # 80 columns screen.
21929 # Hereafter are some DEC vt terminals' commands. (valid on VT200 and 300)
21930 # They are used in string capabilities with VT220-320 emulation mode.
21931 # In the following DEC definitions, two kinds of terminfo databases are
21933 # 1. the first with Command Sequence Introducer starting with escape
21934 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
21935 # 2. the second with Command Sequence Introducer starting with escape
21936 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
21937 # Soft Terminal Reset esc [ ! p
21938 # RIS (erases screen): esc c
21939 # DECKPNM numeric keypad mode: esc >
21940 # DECKPAM applic. keypad mode: esc =
21941 # DECSTBM Scrolling region: esc [ r
21942 # SCS select G0 = US: esc ( B
21943 # SCS select G1 = line-graphic: esc ) 0
21944 # Select 7-bit C1 controls: esc sp F
21945 # Select 8-bit C1 controls: esc sp G
21946 # Select cursor home: esc [ H
21947 # Select erase screen: esc [ J
21948 # SM KAM lock keyboard: esc [ 2 h
21949 # RM KAM unlock keyboard: esc [ 2 l
21950 # SM SRM local echo off: esc [ 1 2 h
21951 # RM SRM local echo on: esc [ 1 2 l
21952 # SM LNM New line : esc [ 2 0 h
21953 # RM LNM return = CR only: esc [ 2 0 l
21954 # SM DECCKM cursor keys mode: esc [ ? 1 h
21955 # RM DECCKM appli. keys mode: esc [ ? 1 l
21956 # SM DECANM ANSI mode on: esc [ ? 2 h
21957 # RM DECANM ANSI mode off: esc [ ? 2 l
21958 # SM DECCOLM 132-column screen: esc [ ? 3 h
21959 # RM DECCOLM 80-column screen: esc [ ? 3 l
21960 # SM DECSCLM Smooth scroll: esc [ ? 4 h
21961 # RM DECSCLM Jump scroll: esc [ ? 4 l
21962 # SM DECSCNM screen light backgr. esc [ ? 5 h
21963 # RM DECSCNM screen dark backgr. esc [ ? 5 l
21964 # SM DECOM move within margins: esc [ ? 6 h
21965 # RM DECOM move outside margins: esc [ ? 6 l
21966 # SM DECAWM auto right margin: esc [ ? 7 h
21967 # RM DECAWM auto right margin: esc [ ? 7 l
21968 # SM DECARM auto repeat: esc [ ? 8 h
21969 # RM DECARM auto repeat: esc [ ? 8 l
21970 # DECSASD Select active main: esc [ 0 $ }
21971 # DECSASD Select active status: esc [ 1 $ }
21972 # DECSSDT Select status none: esc [ 0 $ ~
21973 # DECSSDT Select status indic.: esc [ 1 $ ~
21974 # DECSSDT Select status host-wr: esc [ 2 $ ~
21975 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
21976 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
21977 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
21978 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
21979 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
21980 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
21981 # SM DECKBUM clavier informatique esc [ ? 6 8 h
21982 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
21983 # DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 " p
21984 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
21985 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
21986 # DECSCL VT300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
21987 # Char. and Line attributes: esc [ Ps ... Ps m
21988 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21989 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21992 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
21993 bq300|Bull VT320 ISO Latin 1 80 columns terminal,
21994 eo, km, mir, xenl, xon,
21996 blink=\E[5m, bold=\E[1m, cup=\E[%i%p1%d;%p2%dH,
21997 dch=\E[%p1%dP, dch1=\E[P, dsl=\E[1$}\E[2$~\n\E[0$},
21998 ech=\E[%p1%dX, el1=\E[1K, flash=\E[?5h$<50>\E[?5l,
21999 ich=\E[%p1%d@, ind=\ED, is1=\E[63;1"p\E[2h,
22000 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22002 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
22003 kb2=\EOu, kc1=\EOq, kc3=\EOs, kf1=\EOP, kf10=\E[21~,
22004 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
22005 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
22006 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
22007 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
22008 khlp=\E[28~, krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
22009 nel=\EE, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
22010 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
22011 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
22012 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
22013 %;m%?%p9%t\E(0%e\E(B%;,
22014 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
22015 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
22016 smul=\E[4m, tsl=\E[1$}\E[2$~, use=ansi+enq, use=ansi+csr,
22017 use=ansi+erase, use=ansi+idl, use=ansi+local,
22018 use=ansi+pp, use=dec+sl, use=vt100+4bsd, use=vt220+cvis,
22021 bq300-rv|Bull VT320 reverse 80 columns,
22022 flash=\E[?5l$<50>\E[?5h,
22023 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22026 bq300-w|Bull VT320 132 columns,
22028 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22030 rs2=\E[?3h, use=bq300,
22031 bq300-w-rv|Bull VT320 reverse mode 132 columns,
22033 flash=\E[?5l$<50>\E[?5h,
22034 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22036 rs2=\E[?3h, use=bq300,
22038 # This entry is used for terminals with VT320 emulation mode
22039 # and following set-up :
22040 # 8 bit ISO Latin Character Set (ISO 8859-1),
22041 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
22042 # 80 columns screen.
22043 # Soft Terminal Reset csi ! p
22044 # RIS (erases screen): esc c
22045 # DECKPNM numeric keypad mode: esc >
22046 # DECKPAM applic. keypad mode: esc =
22047 # DECSTBM Scrolling region: esc [ r
22048 # SCS select G0 = US: esc ( B
22049 # SCS select G1 = line-graphic: esc ) 0
22050 # Select 7-bit C1 controls: esc sp F
22051 # Select 8-bit C1 controls: esc sp G
22052 # Select cursor home: csi H
22053 # Select erase screen: csi J
22054 # SM KAM lock keyboard: csi 2 h
22055 # RM KAM unlock keyboard: csi 2 l
22056 # SM SRM local echo off: csi 1 2 h
22057 # RM SRM local echo on: csi 1 2 l
22058 # SM LNM New line : csi 2 0 h
22059 # RM LNM return = CR only: csi 2 0 l
22060 # SM DECCKM cursor keys mode: csi ? 1 h
22061 # RM DECCKM appli. keys mode: csi ? 1 l
22062 # SM DECANM ANSI mode on: csi ? 2 h
22063 # RM DECANM ANSI mode off: csi ? 2 l
22064 # SM DECCOLM 132-column screen: csi ? 3 h
22065 # RM DECCOLM 80-column screen: csi ? 3 l
22066 # SM DECSCLM Smooth scroll: csi ? 4 h
22067 # RM DECSCLM Jump scroll: csi ? 4 l
22068 # SM DECSCNM screen light backgr. csi ? 5 h
22069 # RM DECSCNM screen dark backgr. csi ? 5 l
22070 # SM DECOM move within margins: csi ? 6 h
22071 # RM DECOM move outside margins: csi ? 6 l
22072 # SM DECAWM auto right margin: csi ? 7 h
22073 # RM DECAWM auto right margin: csi ? 7 l
22074 # SM DECARM auto repeat: csi ? 8 h
22075 # RM DECARM auto repeat: csi ? 8 l
22076 # DECSASD Select active main: csi 0 $ }
22077 # DECSASD Select active status: csi 1 $ }
22078 # DECSSDT Select status none: csi 0 $ ~
22079 # DECSSDT Select status indic.: csi 1 $ ~
22080 # DECSSDT Select status host-wr: csi 2 $ ~
22081 # SM DECTCEM Visible cursor: csi ? 2 5 h
22082 # RM DECTCEM Invisible cursor: csi ? 2 5 l
22083 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
22084 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
22085 # DECSCL VT300 mode 8-bit ctrl: csi 6 3 " p
22086 # or DECSCL VT300 mode 8-bit ctrl: csi 6 3 ; 0 " p
22087 # DECSCL VT300 mode 7-bit ctrl: csi 6 3 ; 1 " p
22088 # Char. and Line attributes: csi Ps ... Ps m
22089 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
22090 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
22091 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
22092 bq300-8|Bull VT320 full 8 bits 80 columns,
22093 eo, eslok, hs, km, mc5i, mir, xenl, xon,
22095 blink=\2335m, bold=\2331m, clear=\233H\233J,
22096 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
22097 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
22098 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
22099 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
22100 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
22101 el=\233K, el1=\2331K, flash=\233?5h$<50>\233?5l,
22102 fsl=\2330$}, home=\233H, ich=\233%p1%d@, il=\233%p1%dL,
22103 il1=\233L, ind=\ED, is1=\E[63;2"p\E[2h,
22104 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22106 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
22107 ka3=\217y, kb2=\217u, kc1=\217q, kc3=\217s, kcub1=\233D,
22108 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\2333~,
22109 kf1=\217P, kf10=\23321~, kf11=\23323~, kf12=\23324~,
22110 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
22111 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\217Q,
22112 kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
22113 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
22114 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
22115 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
22116 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
22117 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
22118 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
22119 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
22120 s0ds=\E(B, s1ds=\E(0, sc=\E7,
22121 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22122 1%;m%?%p9%t\E(0%e\E(B%;,
22123 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
22124 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
22125 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
22126 use=vt100+4bsd, use=vt220+cvis8,
22127 bq300-8rv|Bull VT320 8-bit reverse mode 80 columns,
22128 flash=\233?5l$<50>\233?5h,
22129 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22132 bq300-8w|Bull VT320 8-bit 132 columns,
22134 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22136 rs2=\233?3h, use=bq300-8,
22137 bq300-w-8rv|Bull VT320 8-bit reverse mode 132 columns,
22139 flash=\233?5l$<50>\233?5h,
22140 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22142 rs2=\233?3h, use=bq300-8,
22144 # This entry is used for terminals with VT320 emulation mode
22145 # a 102 keys keyboard (PC scancode !) and following set-up :
22146 # 8 bit ISO Latin Character Set (ISO 8859-1),
22147 # 7 bit Control Characters,
22148 # 80 columns screen.
22149 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
22150 kbs=^H, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~,
22151 kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@,
22152 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~,
22153 kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, krdo@, kslt@, lf1@, lf2@,
22154 lf3@, lf4@, use=vt220+pcedit, use=bq300,
22155 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
22156 flash=\E[?5l$<50>\E[?5h,
22157 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22160 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
22162 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22164 rs2=\E[?3h, use=bq300-pc,
22165 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
22167 flash=\E[?5l$<50>\E[?5h,
22168 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22170 rs2=\E[?3h, use=bq300-pc,
22171 # 8 bit ISO Latin Character Set (ISO 8859-1),
22172 # 8 bit Control Characters,
22173 # 80 columns screen.
22174 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
22175 kend=\2334~, kf1=\23317~, kf10=\23328~, kf11=\23329~,
22176 kf12=\23331~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
22177 kf2=\23318~, kf20@, kf3=\23319~, kf4=\23320~, kf5=\23321~,
22178 kf6=\23323~, kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@,
22179 khlp@, khome=\2331~, krdo@, kslt@, lf1@, lf2@, lf3@, lf4@,
22181 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
22182 flash=\E[?5l$<50>\E[?5h,
22183 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22186 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
22188 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22190 rs2=\E[?3h, use=bq300-8-pc,
22191 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
22193 flash=\E[?5l$<50>\E[?5h,
22194 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22196 rs2=\E[?3h, use=bq300-8-pc,
22198 #======================================================#
22199 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
22200 #======================================================#
22202 # normal mode, 8 bits, 80 columns terminal.
22203 # BLD bell disable ^[g
22204 # BLE bell enable ^[h
22205 # CAMR char. attr. mode reset ^[[G
22206 # CAMS char. attr. mode set ^[[D
22208 # CM character mode (async.) ^[k
22209 # EP echoplex mode (by host) ^[m
22210 # IM insert mode set ^[[I
22211 # IMR insert mode reset ^[[J
22212 # KBL keyboard lock (reset) ^[[X
22213 # KBU keyboard unlock (set) ^[[W
22214 # LGR Line-graphic mode reset ^[F
22215 # LGS Line-graphic mode set ^[G
22216 # NEP non echoplex mode (by host) ^[l
22217 # PDS print data space ^[[0p
22218 # PDT print data terminator ^[[<p
22219 # PHD print host data ^[[3p
22220 # PRES print adapter reset ^[[2p
22221 # RBM block mode reset ^[[E
22223 # RIS reset initial state: ^[c
22224 # RMR roll mode reset ^[q
22225 # RMS roll mode set ^[r
22226 # SCD scroll down (72 lines) ^[[1s
22227 # SCU scroll up (72 lines) ^[[0s
22228 # SLL status line lock ^[O
22229 # SLR status line reset ^[v
22230 # SLS status line set ^[w
22231 # SM78 set mode vip7800 ^[[1q
22232 # SSP0 partition 0 set ^[[00u
22233 # SSP1 partition n format 1 ^[[PnPnSTRINGu
22234 # SSP2 partition n format 2 ^[[PnPnSTRINGu
22235 # SSP3 partition n format 3 ^[[PnPnu
22236 # SSPR multi-part. reset ^[[<>u
22237 # TBC tab clear (at cursor pos.) ^[[g
22238 # TBI tab initialize ^[[N
22239 # TBS tab set (at cursor pos.) ^[p
22241 # ATR attribute (visual)
22244 # hide (blank) : ^[sH
22245 # inverse video : ^[sI
22250 # This covers the vip7800 and BQ3155-vip7800
22251 vip|Bull Questar 3155-7800,
22252 am, eslok, hs, km, mc5i, msgr, xenl, xon,
22254 acsc=0pjdkblamcnkqitgufvhwexj, blink=\EsB, clear=\E`,
22255 cub1=^H, cud1=\n, cup=\E[%i%p1%03d%p2%03df, dch1=\E[P,
22256 dim=\EsL, dl1=\E[M, dsl=\Ev,
22257 flash=\007$<80>\007$<80>\007, fsl=\EO, hts=\Ep,
22258 ich1=\E[I, invis=\EsH,
22259 is2=\E[00u\E[<>001001024080024080u\E[01u,
22260 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kcbt=\E[Z,
22261 kclr=\E`, kctab=\E[g, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
22262 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
22263 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
22264 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
22265 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
22266 kf4=\E8, kf5=\E:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
22267 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
22268 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
22269 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
22270 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
22271 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
22272 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
22273 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
22274 smul=\Es_, tbc=\E[N, tsl=\Ew, use=ansi+inittabs,
22276 # normal screen, 8 bits, 132 columns terminal.
22277 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
22279 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
22280 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
22282 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
22283 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
22284 cols#132, lines#72, wsl#132,
22285 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
22290 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
22291 # that is smaller than the screen, and puts up a warning message
22292 # outside the window. Te erases the warning message, puts the
22293 # window back to be the whole screen, and puts the cursor at just
22294 # below the small window. I defined <cnorm> and <civis> to really turn
22295 # the cursor on and off, but I have taken this out since I don't
22296 # like the cursor being turned off when vi exits.
22297 cg7900|chromatics|chromatics 7900,
22300 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
22301 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
22302 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
22303 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
22305 rmso=\001C1\,\001c2\,,
22306 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
22307 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
22308 \001W0\,0\,79\,39\,,
22309 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
22311 #### Computer Automation
22314 ca22851|Computer Automation 22851,
22317 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
22318 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
22319 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
22324 # This entry has correct padding and the undocumented "ri" capability
22325 cyb83|xl83|Cybernex xl-83,
22328 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
22329 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
22330 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
22331 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
22332 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
22333 cyb110|mdl110|Cybernex mdl-110,
22336 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
22337 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
22338 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
22339 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
22340 ht=\011$<43>, ich1=\016A\035$<3.5>,
22341 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
22345 # Datapoint is gone. They used to be headquartered in Texas.
22346 # They created ARCnet, an Ethernet competitor that flourished for a while
22347 # in the early 1980s before 3COM got wise and cut its prices. The service
22348 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
22351 dp3360|datapoint|Datapoint 3360,
22354 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
22355 ed=^_, el=^^, home=^], ind=\n,
22357 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
22358 # The Datapoint 8242 Workstation was sold at least between 1985
22359 # and 1989. To make the terminal work with this entry, press
22360 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
22361 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
22362 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
22363 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
22364 # fact unusable because the strings sent by the terminal conflict
22365 # with other keys).
22366 # The terminal is capable of displaying "box draw" characters.
22367 # For each graphic character you must send 2 ESC's (\E\E) followed
22368 # by a control character as follows:
22369 # character meaning
22370 # ========= =======
22373 # ctrl-G bottom tee
22376 # ctrl-J top left corner
22377 # ctrl-K top right corner
22378 # ctrl-L bottom left corner
22379 # ctrl-M bottom right corner
22380 # ctrl-N horizontal line
22381 # ctrl-O vertical line
22382 # Unfortunately this cannot be fitted into the termcap/terminfo
22383 # description scheme.
22384 dp8242|Datapoint 8242,
22387 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
22388 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
22389 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
22390 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22391 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
22392 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
22393 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
22394 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
22395 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22396 smso=\E^E, smul=\E^F,
22397 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
22400 #### DEC terminals (Obsolete types: DECwriter and VT40/42/50)
22402 # These entries came from DEC's official terminfos for its older terminals
22403 # (which happen to be identical to the AT&T/SCO terminal descriptions),
22404 # Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support Engineering
22405 # may have had more information. Updated terminfos and termcaps were available
22406 # at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
22408 # DEC's terminfos did not describe the auxiliary keypad.
22410 # DECScope of course had no "function keys", but this building block assigns
22411 # the three blank keys at the top of the auxiliary (numeric) keypad, using
22412 # the same analogy as VT100 (also lacking function-keys).
22414 # These assignments use the same layout for 0-9 as VT100+keypad; the VT52
22415 # keypad had its cursor-keys on the right-column as shown -TD
22416 # _______________________________________
22417 # | PF1 | PF2 | PF3 | c-up |
22418 # | \EP | \EQ | \ER | \EA |
22419 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_|
22421 # | \E?w | \E?x | \E?y | \EB |
22422 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____|
22423 # | 4 | 5 | 6 | c-right |
22424 # | \E?t | \E?u | \E?v | \EC |
22425 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_|
22426 # | 1 | 2 | 3 | c-left |
22427 # | \E?q | \E?r | \E?s | \ED |
22428 # |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____|
22429 # | 0 | . | enter |
22430 # | \E?p | \E?n | \E?M |
22431 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
22433 vt52+keypad|DECScope auxiliary keypad,
22434 ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y,
22435 kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
22436 kf8=\E?w, kf9=\E?x,
22441 bel=^G, cr=\r, cub1=^H, cud1=\n,
22445 bel=^G, cr=\r, cub1=^H, cud1=\n,
22450 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22451 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
22453 cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22454 u8=\E/[HJ], use=vt52+keypad, use=vt50, use=vt52+arrows,
22456 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
22457 vt61|vt-61|vt61.5|DEC VT61,
22459 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
22460 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
22461 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
22462 ind=\n$<20>, ri=\E$<20>I, use=vt52+arrows,
22464 # The gigi does standout with red!
22465 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
22466 gigi|vk100|DEC gigi graphics terminal,
22469 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n,
22470 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, ht=^I, ind=\n,
22471 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
22472 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
22473 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
22474 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22475 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
22476 smul=\E[4m, use=ansi+local,
22478 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
22479 # a PC differentiated from the IBM clones. It was a total, ludicrous,
22480 # grossly-overpriced failure (among other things, DEC's OS didn't include
22481 # a format program, so you had to buy pre-formatted floppies from DEC at
22482 # a hefty premium!).
22483 pro350|decpro|DEC pro console,
22485 cols#80, it#8, lines#24,
22486 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22487 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
22488 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
22489 el=\EK, home=\EH, ht=^I, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH,
22490 kf4=\EI, kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI,
22491 rmacs=\EG, rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H,
22492 smul=\E^D, use=vt52+arrows,
22497 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
22498 dw2|decwriter|dw|DECwriter II,
22501 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
22502 # \E(B Use U.S. character set (otherwise # => british pound !)
22503 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
22504 # \E[w 10 char/in pitch
22505 # \E[1;132 full width horizontal margins
22506 # \E[2g clear all tab stops
22508 # \E[66t 66 lines/page (for \f)
22509 # \E[1;66r full vertical page can be printed
22510 # \E[4g clear vertical tab stops
22511 # \E> disable alternate keypad mode (so it transmits numbers!)
22512 # \E[%i%p1%du set tab stop at column %d (origin == 1)
22513 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
22516 # The dw3 does standout with wide characters.
22518 dw3|la120|DECwriter III,
22521 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
22522 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
22523 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
22525 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
22529 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
22530 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
22532 # These aren't official
22533 ln03|DEC ln03 laser printer,
22536 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
22537 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
22539 ln03-w|DEC ln03 laser printer 132 cols,
22541 kbs=^H, kcub1=^H, kcud1=\n, use=ln03,
22543 #### Delta Data (dd)
22546 # Untested. The cup sequence is hairy enough that it probably needs work.
22547 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
22548 # There are BSD-derived termcap entries floating around for this puppy
22549 # that are *certainly* wrong.
22550 delta|dd5000|delta data 5000,
22553 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
22554 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
22556 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
22558 #### Digital Data Research (ddr)
22561 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
22562 ddr|rebus3180|ddr3180|Rebus/DDR 3180 VT100 emulator,
22564 cols#80, it#8, lines#24, vt#3,
22565 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22566 clear=\E[H\E[2J$<50/>, cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22567 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22568 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
22569 ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D,
22570 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22571 kf3=\EOR, kf4=\EOS, rev=\E[7m$<2/>,
22572 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
22573 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
22574 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
22575 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
22576 smul=\E[4m$<2/>, use=ansi+csr,
22578 #### Evans & Sutherland
22581 # Jon Leech <leech@cs.unc.edu> tells us:
22582 # The ps300 was the Evans & Sutherland Picture System 300, a high
22583 # performance 3D vector graphics system with a bunch of specialized hardware.
22584 # Approximate date of release was 1982 (early 80s, anyway), and it had several
22585 # evolutions including (limited) color versions such as the PS330C. PS300s
22586 # were effectively obsolete by the late 80s, replaced by raster graphics
22587 # systems, although specialized applications like molecular modeling
22588 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
22589 # are out of production, though of course E&S is very much alive (in 1996).
22590 # (ps300: changed ":pt@:" to "it@" -- esr)
22592 ps300|Picture System 300,
22595 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
22597 #### General Electric (ge)
22600 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
22603 bel=^G, cr=\r, cud1=\n, ind=\n,
22605 #### Heathkit/Zenith
22608 # Here is a description of the H19 DIP switches:
22611 # 0-3 = baud rate as follows:
22616 # 0 1 0 1 1200 baud
22617 # 1 0 0 0 2400 baud
22618 # 1 0 1 0 4800 baud
22619 # 1 1 0 0 9600 baud
22620 # 1 1 0 1 19.2K baud
22622 # 4 = parity (0 = no parity)
22623 # 5 = even parity (0 = odd parity)
22624 # 6 = stick parity (0 = normal parity)
22625 # 7 = full duplex (0 = half duplex)
22628 # 0 = block cursor (0 = underscore cursor)
22629 # 1 = no key click (0 = keyclick)
22630 # 2 = wrap at end of line (0 = no wrap)
22631 # 3 = auto LF on CR (0 = no LF on CR)
22632 # 4 = auto CR on LF (0 = no CR on LF)
22633 # 5 = ANSI mode (0 = VT52 mode)
22634 # 6 = keypad shifted (0 = keypad unshifted)
22635 # 7 = 50Hz refresh (1 = 60Hz refresh)
22637 # Factory Default settings are as follows:
22639 # S401 1 0 0 0 1 1 0 0
22640 # S402 0 0 0 0 0 0 0 0
22641 # (h19: I added <rmam>/<smam> based on the init string;
22642 # also added empty <acsc> to suppress a tic warning -- esr)
22643 h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ANSI mode,
22644 OTbs, am, mir, msgr,
22645 cols#80, it#8, lines#24,
22646 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
22647 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
22648 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
22649 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
22650 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
22651 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
22652 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
22653 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
22654 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
22655 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
22656 h19-bs|Heathkit w/keypad shifted,
22657 rmkx=\Eu, smkx=\Et, use=h19-b,
22658 h19-us|h19us|h19-smul|Heathkit w/keypad shifted/underscore cursor,
22659 rmkx=\Eu, smkx=\Et, use=h19-u,
22660 # (h19: merged in <ip> from BSDI hp19-e entry>;
22661 # also added empty <acsc> to suppress a tic warning --esr)
22662 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
22663 # Tim tells us that:
22664 # I have an old Zenith-19 terminal at home that still gets a lot of use.
22665 # This terminal suffers from the same famous insert-mode padding lossage
22666 # that has been acknowledged for the Z29 terminal. Emacs is nearly
22667 # unusable on this box, since even a half-scroll up or down the window
22668 # causes flaming terminal death.
22670 # On the Z19, the only way I have found around this problem is to remove
22671 # the :al: and :dl: entries entirely. No amount of extra padding will
22672 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
22673 # makes Emacs a little slower, but it remains in the land of the living.
22675 h19|heath|h19-b|heathkit|heath-19|z19|zenith|Heathkit h19,
22676 OTbs, am, eslok, hs, mir, msgr,
22677 cols#80, it#8, lines#24,
22678 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
22679 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22680 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
22681 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
22682 ip=$<1.5/>, kbs=^H, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
22683 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue,
22684 lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
22685 smacs=\EF, smir=\E@, smso=\Ep,
22686 tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, use=vt52+arrows,
22687 h19-u|Heathkit with underscore cursor,
22688 cnorm@, cvvis@, use=h19-b,
22689 h19-g|h19g|Heathkit w/block cursor,
22690 cnorm=\Ex4, cvvis@, use=h19-b,
22691 alto-h19|altoh19|altoheath|alto-heath|alto emulating Heathkit h19,
22693 dl1=\EM, il1=\EL, use=h19,
22695 # The major problem with the Z29 is that it requires more padding than the Z19.
22697 # The problem with declaring an H19 to be synonymous with a Z29 is that
22698 # it needs more padding. It especially loses if a program attempts
22699 # to put the Z29 into insert mode and insert text at 9600 baud. It
22700 # even loses worse if the program attempts to insert tabs at 9600
22701 # baud. Adding padding to text that is inserted loses because in
22702 # order to make the Z29 not die, one must add so much padding that
22703 # whenever the program tries to use insert mode, the effective
22704 # rate is about 110 baud.
22706 # What program would want to put the terminal into insert mode
22707 # and shove stuff at it at 9600 baud you ask?
22709 # Emacs. Emacs seems to want to do the mathematically optimal
22710 # thing in doing a redisplay rather than the practical thing.
22711 # When it is about to output a line on top of a line that is
22712 # already on the screen, instead of just killing to the end of
22713 # the line and outputting the new line, it compares the old line
22714 # and the new line and if there are any similarities, it
22715 # constructs the new line by deleting the text on the old line
22716 # on the terminal that is already there and then inserting new
22717 # text into the line to transform it into the new line that is
22718 # to be displayed. The Z29 does not react kindly to this.
22720 # But don't cry for too long.... There is a solution. You can make
22721 # a termcap entry for the Z29 that says the Z29 has no insert mode.
22722 # Then Emacs cannot use it. "Oh, no, but now inserting into a
22723 # line will be really slow", you say. Well there is a sort of a
22724 # solution to that too. There is an insert character option on
22725 # the Z29 that will insert one character. Unfortunately, it
22726 # involves putting the terminal into ANSI mode, inserting the
22727 # character, and changing it back to H19 mode. All this takes 12
22728 # characters. Pretty expensive to insert one character, but it
22729 # works. Either Emacs doesn't try to use its inserting hack when
22730 # it's only given an insert character ability or the Z29 doesn't
22731 # require padding with this (the former is probably more likely,
22732 # but I haven't checked it out).
22733 # (z29: added empty <acsc> to suppress a tic warning, merged in
22734 # status line capabilities from BRL entry --esr)
22735 z29|zenith29|z29b|Zenith z29b,
22736 OTbs, OTpt, am, eslok, hs, mir, msgr,
22737 OTkn#10, cols#80, lines#24,
22738 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
22739 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22740 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
22741 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
22742 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
22743 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
22744 is2=\E<\E[?2h\Ev, kbs=^H, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU,
22745 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I,
22746 khome=\EH, lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO,
22747 rmso=\Eq, rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep,
22748 smul=\Es8, tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, use=vt52+arrows,
22749 # z29 in ANSI mode. Assumes that the cursor is in the correct state, and that
22750 # the world is stable. <rs1> causes the terminal to be reset to the state
22751 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
22752 # cursor, bc -> block cursor.
22753 # From: Mike Meyers
22754 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
22755 # looks VT100-compatible -- esr)
22756 z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ANSI mode,
22757 OTbs, OTpt, am, eslok, hs, mir, msgr,
22758 OTkn#10, cols#80, it#8, lines#24,
22759 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
22760 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n,
22761 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[1P,
22762 dim=\E[2m, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
22763 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
22764 ind=\ED, kclr=\E[J, ked=\E[J, kf0=\E[~, kf1=\EOS, kf2=\EOT,
22765 kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
22766 kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7, nel=\r\ED, rc=\E[r,
22767 rev=\E[7m, ri=\EM, rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
22768 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
22770 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
22771 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
22772 use=ansi+apparrows, use=ansi+idl, use=ansi+local,
22774 z29a-kc-uc|h29a-kc-uc|Zenith z29 ANSI mode with keyclick and underscore cursor,
22775 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
22778 z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ANSI mode with block cursor and no keyclick,
22779 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
22782 z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ANSI mode with underscore cursor and no keyclick,
22783 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
22786 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
22787 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
22788 am, eslok, hs, mir, msgr, xon,
22790 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
22791 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
22792 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
22793 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
22794 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22795 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
22796 fsl=\E[u, home=\E[H, il=\E[%p1%dL, il1=\E[1L, ind=\n,
22797 is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, ka3=\EOu,
22798 kb2=\EOy, kc1=\EOq, kc3=\EOs, ked=\E[J, kf1=\EOS, kf2=\EOT,
22799 kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
22800 kf9=\EOX, khlp=\E[~, ll=\E[24;1H, mc0=\E[?19h\E[i, rc=\E[u,
22801 rev=\E[7m, rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
22802 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
22803 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m,
22804 tsl=\E[s\E[>1h\E[25;%i%p1%dH, use=ansi+arrows,
22805 use=ansi+local, use=ansi+pp, use=ansi+tabs,
22807 # From: Brad Brahms <Brahms@USC-ECLC>
22808 z100|h100|z110|z-100|h-100|Heath/Zenith z-100 pc with color monitor,
22809 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
22810 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
22811 z100bw|h100bw|z110bw|z-100bw|h-100bw|Heath/Zenith z-100 pc,
22812 OTbs, OTpt, mir, msgr,
22813 OTkn#10, cols#80, it#8, lines#24,
22814 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
22815 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
22816 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
22817 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
22818 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kf0=\EJ, kf1=\ES,
22819 kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
22820 kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
22821 smacs=\EF, smir=\E@, smso=\Ep, use=vt52+arrows,
22822 p19|h19-b with il1/dl1,
22823 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
22824 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
22825 # (ztx: removed duplicate :sr: -- esr)
22826 ztx|ztx11|zt-1|htx11|ztx-1-a|Heath/Zenith ztx-10 or 11,
22827 OTbs, am, eslok, hs,
22828 cols#80, it#8, lines#24,
22829 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
22830 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
22831 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
22832 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
22833 kbs=^H, kf0=\ES, kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP,
22834 kf6=\EQ, kf7=\ER, ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5,
22835 smul=\Es2, tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, use=vt52+arrows,
22837 #### IMS International (ims)
22839 # There was a company called IMS International located in Carson City,
22840 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
22841 # bus/Z80 hardware and a line of terminals called Ultimas.
22844 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
22845 ims950-b|bare ims950 no init string,
22847 # (ims950: removed obsolete ":ko@:" -- esr)
22848 ims950|IMS TeleVideo 950 emulation,
22850 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22851 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
22852 # (ims950-rv: removed obsolete ":ko@:" -- esr)
22853 ims950-rv|IMS tvi950 rev video,
22855 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22856 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
22857 ims-ansi|ultima2|ultimaII|IMS Ultima II,
22859 cols#80, it#8, lines#24,
22860 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
22861 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
22862 ht=^I, if=/usr/share/tabset/vt100,
22863 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
22864 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
22865 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
22868 #### Intertec Data Systems
22870 # I think this company is long dead as of 1995. They made an early CP/M
22871 # micro called the "Intertec Superbrain" that was moderately popular,
22872 # then sank out of sight.
22875 superbrain|Intertec Superbrain,
22878 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
22879 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
22880 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
22881 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
22882 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
22883 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
22884 # and the reverse is actually true. Try it. -- esr)
22885 intertube|intertec|Intertec InterTube,
22888 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
22889 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
22890 ind=\n, rmso=\E0@, smso=\E0P,
22891 # The intertube 2 has the "full duplex" problem like the Tektronix 4025: if you
22892 # are typing and a command comes in, the keystrokes you type get interspersed
22893 # with the command and it messes up
22894 intertube2|Intertec data systems InterTube 2,
22896 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
22897 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
22898 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
22900 #### Ithaca Intersystems
22902 # This company made S100-bus personal computers long ago in the pre-IBM-PC
22903 # past. They used to be reachable at:
22905 # Ithaca Intersystems
22906 # 1650 Hanshaw Road
22907 # Ithaca, New York 14850
22909 # However, the outfit went bankrupt years ago.
22912 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
22913 # These entries were written (originally in termcap syntax) by Brian Yandell
22914 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
22915 # University of Wisconsin.
22917 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
22918 # removed <if=/usr/share/tabset/init.graphos> and
22919 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
22920 graphos|graphos III,
22922 cols#80, it#8, lines#24,
22923 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
22924 cr=\r, cub1=^H, cud=\E[%p1%dB, cup=\E[%i%p1%d;%p2%dH,
22925 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, ed=\E[J,
22926 el=\E[K, home=\E[H, ht=^I, ind=\ED, kf1=\EOP, kf2=\EOQ,
22927 kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
22928 rmir=\E[4l, sc=\E7, sgr0=\E[m, smdc=\E[4h, smir=\E[4h,
22929 use=ansi+arrows, use=ansi+idl, use=ansi+local,
22932 graphos-30|graphos III with 30 lines,
22934 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
22938 # These people used to be reachable at:
22941 # 1393 Main Street,
22942 # Waltham, MA 02154
22943 # Vox: (617)-890-5796.
22945 # However, if you call that number today you'll get an insurance company.
22946 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
22947 # 26 Feb 1997 that says:
22949 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
22950 # for ~7 years. Modgraph still in business. Products are rugged laptop and
22951 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
22952 # panel-mount etc). I can be emailed at sonfour@aol.com
22954 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
22955 # dated 1984. According to the manual, it featured Tek 4010/4014
22956 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
22959 modgraph|mod24|modgraph terminal emulating VT100,
22961 cvvis=\E\^9;0s\E\^7;1s,
22962 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
22963 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
22964 \E\^11;81s\E\^11;89s,
22965 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
22966 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
22967 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
22969 cols#80, it#8, lines#24,
22970 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
22971 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
22972 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
22973 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
22974 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
22975 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
22976 1s\E\^9;1s\E\^27;1,
22979 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
22980 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
22981 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
22982 # mark and using delete-to-killbuffer work correctly. However, we would
22983 # like normal mode of operation to be using a Modgraph with 48 line setting.
22984 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
22985 # the setting mark and delete-to-killbuffer results in the deletion of only
22986 # the line the mark is set on.
22987 # We've discovered that the delete-to-killbuffer works correctly
22988 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
22989 # the first line disappears but a ctrl-l shows that it did work
22991 modgraph48|mod|Modgraph w/48 lines,
22992 OTbs, OTpt, am, xenl,
22993 cols#80, it#8, lines#48, vt#3,
22994 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
22995 cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22996 cuu1=\E[A, ed=\E[J, el=\E[K,
22997 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
22998 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
22999 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
23000 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM,
23001 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\E=\E[0q\E>,
23002 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
23005 #### Morrow Designs
23007 # This was George Morrow's company. They started in the late 1970s making
23008 # S100-bus machines. They used to be reachable at:
23011 # 600 McCormick St.
23012 # San Leandro, CA 94577
23014 # but they're long gone now (1995).
23017 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
23018 # Jeff's specimen was dated June 1984.
23019 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
23020 mt70|mt-70|Morrow MD-70; native Morrow mode,
23021 am, mir, msgr, xon,
23022 cols#80, it#8, lines#24,
23023 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
23024 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
23025 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
23026 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
23027 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
23028 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
23029 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
23030 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
23031 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
23032 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
23033 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23034 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
23035 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
23036 smul=\EG1, tbc=\E0, use=adm+sgr,
23041 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
23043 ex155|Motorola Exorterm 155,
23045 OTkn#5, OTug#1, cols#80, lines#24,
23046 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
23047 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
23048 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
23049 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
23050 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
23054 # This company is still around in 1995, manufacturing point-of-sale systems.
23056 omron|Omron 8025AG,
23059 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
23060 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
23061 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
23065 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
23066 # were competition for things like the Tektronix 4025.
23069 # Ramtek 6221 from BRL, probably by Doug Gwyn
23070 # The following SET-UP modes are assumed for normal operation:
23071 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
23072 # NEWLINE_OFF 80_COLUMNS
23073 # Other SET-UP modes may be set for operator convenience or communication
23074 # requirements; I recommend
23075 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
23076 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
23077 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
23078 # Note that the Control-E key is useless on this brain-damaged terminal. No
23079 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
23080 rt6221|Ramtek 6221 80x24,
23081 OTbs, OTpt, msgr, xon,
23082 OTkn#4, cols#80, it#8, lines#24, vt#3,
23083 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
23084 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r, cub1=^H,
23085 cud1=^K, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
23086 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
23087 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23088 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
23089 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
23090 nel=\EE, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, rmso=\E[m,
23092 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
23093 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
23095 sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, smul=\E[4m,
23096 tbc=\E[3g, use=ansi+csr, use=ansi+local,
23098 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
23099 rt6221-w|Ramtek 6221 160x48,
23100 cols#160, lines#48,
23101 ll=\E[48;1H, use=rt6221,
23106 # RCA VP3301 or VP3501
23107 rca|RCA vp3301/vp3501,
23110 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23111 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
23117 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
23118 # The following SET-UP modes are assumed for normal operation:
23119 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
23120 # ONLINE ANSI CURSOR_VISIBLE
23121 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
23122 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
23123 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
23124 # For use with graphics software, all graphics modes should be set to factory
23125 # default. Other SET-UP modes may be set for operator convenience or
23126 # communication requirements. No delays are specified; use "stty ixon -ixany"
23127 # to enable DC3/DC1 flow control!
23128 # I commented out the scrolling capabilities since they are too slow.
23129 hirez100|Selanar HiREZ-100,
23130 OTbs, OTpt, mir, msgr, xon,
23131 OTkn#4, cols#80, it#8, lines#48, vt#3,
23132 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub=\E[%p1%dD,
23133 cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
23134 dch=\E[%p1%dP, dch1=\E[P, home=\E[H, ht=^I, hts=\EH,
23135 is2=\E<\E)0, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
23136 kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1,
23137 lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[48H, mc0=\E[i,
23138 mc4=\E[4i\E[?4i, mc5=\E[?5i\E[5i, nel=\EE, rc=\E8,
23139 rev=\E[7m, rmacs=^O, rmkx=\E[?1l\E>,
23140 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
23141 9l\E[r\E[m\E(B\017\E)0\E>,
23142 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, tbc=\E[3g,
23143 use=ansi+erase, use=ansi+idl, use=ansi+local,
23144 use=ansi+sgrso, use=ansi+sgrul,
23146 hirez100-w|Selanar HiREZ-100 in 132-column mode,
23147 cols#132, use=hirez100,
23152 # From University of Wisconsin
23153 vsc|Signetics Vsc Video driver by RMC,
23155 cols#80, it#8, lines#26,
23156 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
23157 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
23158 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
23159 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
23163 # Alan Frisbie <frisbie@flying-disk.com> writes:
23165 # As you may recall, the Soroc logo consisted of their name,
23166 # with the letter "S" superimposed over an odd design. This
23167 # consisted of a circle with a slightly smaller 15 degree (approx.)
23168 # wedge with rounded corners inside it. The color was sort of
23169 # a metallic gold/yellow.
23171 # If I had been more of a beer drinker it might have been obvious
23172 # to me, but it took a clue from their service department to make
23173 # me exclaim, "Of course!" The circular object was the top of
23174 # a beer can (the old removable pop-top style) and "Soroc" was an
23175 # anagram for "Coors".
23177 # I can just imagine the founders of the company sitting around
23178 # one evening, tossing back a few and trying to decide what to
23179 # call their new company and what to use for a logo.
23182 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
23183 soroc120|iq120|soroc|Soroc iq120,
23184 clear=\E*$<2>, ed=\EY, el=\ET, use=adm3a,
23185 soroc140|iq140|Soroc iq140,
23188 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23189 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
23190 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
23191 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
23192 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23193 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
23194 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
23196 #### Southwest Technical Products
23198 # These guys made an early personal micro called the M6800.
23199 # The ct82 was probably its console terminal.
23202 # (swtp: removed obsolete ":bc=^D:" -- esr)
23203 swtp|ct82|Southwest Technical Products ct82,
23206 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
23207 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
23208 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
23209 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
23210 \017\035\027\022\011,
23211 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
23215 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
23217 # Synertek used to make ICs, various 6502-based single-board process
23218 # control and hobbyist computers, and assorted peripherals including a
23219 # series of small inexpensive terminals (I think they were one of the
23220 # first to have a "terminal-on-a-keyboard", where the terminal itself
23221 # was only slightly larger than the keyboard).
23223 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
23224 # was a 40x24 terminal that could connect to a standard TV through a
23225 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
23226 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
23227 # I have a KTM-2/80 still in working order. The KTM-2s had fully
23228 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
23229 # ROM and 2 ROMs as character generators. They were incredibly simple,
23230 # and I've never had any problems with mine (witness the fact that mine
23231 # was made in 1981 and is still working great... I've blown the video
23232 # output transistor a couple of times, but it's a 2N2222 :-)
23234 # The KTM-3 (which is what is listed in the terminfo file) was their
23235 # attempt at putting a KTM-2 in a box (and some models came with a
23236 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
23237 # control and escape sequences are very different. The KTM-3 was always
23238 # real broken, at least according to the folks I've talked to about it.
23240 # The padding in the entry is probably off--these terminals were very
23241 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
23242 # anyone with any sanity replaced the ROMs with something that provided
23243 # a reasonable subset of VT100 functionality, since the usual ROMs were
23244 # obviously very primitive... oh, you could get an upgraded ROM from
23245 # Synertek for some incredible amount of money, but what hacker with an
23246 # EPROM burner would do that? :)
23248 # Sorry I don't have any contact info; I believe they were located in
23249 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
23250 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
23251 # business these days.
23254 # Tested, seems to work fine with vi.
23255 synertek|ktm|synertek380|Synertek KTM 3/80 tubeless terminal,
23258 clear=^Z, cub1=^H, cuf1=^L,
23259 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23261 #### Tab Office Products
23263 # TAB Products Co. - Palo Alto, California
23264 # Electronic Office Products,
23265 # 1451 California Avenue 94304
23267 # I think they're out of business.
23270 # The tab 132 uses xon/xoff, so no padding needed.
23271 # <smkx>/<rmkx> have nothing to do with arrow keys.
23272 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
23273 # Seems to be no way to get rid of status line.
23274 # The manual for this puppy was dated June 1981. It claims to be VT52-
23275 # compatible but looks more VT100-like -esr
23278 # https://ub.fnwi.uva.nl/computermuseum/tab13215g.html
23279 # This monochrome graphics terminal of TAB Products, California, is a DEC
23280 # VT52/VT100/VT132 compatible alphanumeric terminal (TAB 132/15),
23281 # factory-fitted with additional hardware for Tektronix 4010 emulation.
23282 # Also the terminal understands a selection of Tektronix 4027 commands.
23283 tab132|tab|tab132-15|tab 132/15,
23286 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, il1=\E[L,
23287 is2=\E[?7h\E[?3l\E[?5l, rmir=\E[4l, rmkx@, smir=\E[4h,
23288 smkx@, use=decid+cpr, use=vt100+4bsd,
23289 tab132-w|tab132 in wide mode,
23291 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
23292 tab132-rv|tab132 in reverse-video mode,
23293 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
23294 tab132-w-rv|tab132 in reverse-video/wide mode,
23295 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
23300 # Research Incorporated
23301 # 6425 Flying Cloud Drive
23302 # Eden Prairie, MN 55344
23303 # Vox: (612)-941-3300
23305 # The Teleray terminals were all discontinued in 1992-93. RI still services
23306 # and repairs these beasts, but no longer manufactures them. The Teleray
23307 # people believe that all the types listed below are very rare now (1995).
23308 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
23309 # Model 100) that were ANSI-compatible.
23311 # Note two things called "teleray". Reorder should move the common one
23312 # to the front if you have either. A dumb Teleray with the cursor stuck
23313 # on the bottom and no obvious model number is probably a 3700.
23316 t3700|dumb Teleray 3700,
23319 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
23320 t3800|Teleray 3800 series,
23322 cols#80, it#8, lines#24,
23323 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23324 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23325 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
23326 t1061|teleray|Teleray 1061,
23327 OTbs, am, km, xhp, xt,
23328 cols#80, it#8, lines#24, xmc#1,
23329 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23330 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23331 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
23332 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
23333 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
23334 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
23335 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
23336 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
23338 t1061f|Teleray 1061 with fast PROMs,
23339 dl1=\EM, il1=\EL, ip@, use=t1061,
23340 # "Teleray Arpa Special", officially designated as
23341 # "Teleray Arpa network model 10" with "Special feature 720".
23342 # This is the new (1981) fast microcode updating the older "arpa" proms
23343 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
23344 # converts the keypad to programmable function keys, and has other goodies.
23345 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
23346 # programs handle such lossage properly.
23347 # Note: this is NOT the old termcap's "t1061f with fast proms."
23348 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
23349 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
23350 t10|Teleray 10 special,
23352 cols#80, it#8, lines#24, xmc#2,
23353 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
23354 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23355 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
23356 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
23358 # Teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
23359 # back/forth words. Put the function keys (f1-f10) where they can be
23360 # found, and turn off the other magic keys along the top row, except
23361 # for line/local. Do the magic appropriate to make the page shifts work.
23362 # Also toggle ^S/^Q for those of us who use Emacs.
23364 am, da, db, mir, xhp, xt,
23366 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H,
23367 cup=%i\E[%p1%d;%p2%df, dch1=\E[P, dl1=\E[M, ed=\E[0J,
23368 el=\E[0K, home=\E[H, ht=^I, il1=\E[L, ind=\n, kf1=^Z1,
23369 kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
23370 kf8=^Z8, kf9=^Z9, ri=\E[T, rmcup=\E[V\E[24;1f\E[?38h,
23371 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23372 smcup=\E[U\E[?38l, smir=\E[4h, smso=\E[7m, smul=\E[4m,
23375 #### Texas Instruments (ti)
23378 # The Silent 700 was so called because it was built around a quiet thermal
23379 # printer. It was portable, equipped with an acoustic coupler, and pretty
23380 # neat for its day.
23381 ti700|ti733|ti735|ti745|ti800|Texas Instruments Silent 700/733/735/745 or OMNI 800,
23384 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
23386 # Terminal entries for the Texas Instruments 703/707
23387 # hardcopy terminals.
23389 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/
23391 # Model 707 Data Terminal User's Manual
23392 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/2310451-0001_Silent_700_Model_707_Users_Manual_Nov1983.pdf
23394 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
23395 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0
23396 # cpi using an escape sequence. There is no 80/132-column capability in
23397 # terminfo (only the more general cpi which allows any value).
23398 ti703|ti707|Texas Instruments Silent 703/707,
23401 cuf1=\s, is2=\EPC\\, nel=\r\n, use=ti700,
23402 ti703-w|ti707-w|Texas Instruments Silent 703/707 (132 column),
23404 is2=\EPD\\, use=ti703,
23407 # Texas Instruments 916 VDT 7 bit control mode
23409 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 VT220 mode 7 bit CTRL,
23411 cbt=\E[Z, clear=\E[H\E[2J$<6>, dch=\E[%p1%dP$<250>,
23412 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
23413 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
23414 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
23415 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
23416 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
23417 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
23418 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
23419 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
23420 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
23421 smacs=\016$<2>, vpa=\E[%p1%{1}%+%dd, use=vt220,
23423 # Texas Instruments 916 VDT 8 bit control mode
23425 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 VT220 mode bit CTRL,
23426 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
23427 kcuu1=\233A, kdch1=\233P, kf1=\23317~, kf10=\23328~,
23428 kf11=\23329~, kf12=\23331~, kf2=\23318~, kf3=\23319~,
23429 kf4=\23320~, kf5=\23321~, kf6=\23323~, kf7=\23324~,
23430 kf8=\23325~, kf9=\23326~, khome=\233H, kich1=\233@,
23431 knp=\233S, kpp=\233T, use=ti916,
23433 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
23435 ti916-132|Texas Instruments 916 VDT VT220 132 column,
23436 cols#132, use=ti916,
23438 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
23440 ti916-8-132|Texas Instruments 916 VDT 8-bit VT220 132 column,
23441 cols#132, use=ti916-8,
23442 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
23444 cols#80, it#8, lines#24,
23445 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23446 csr=%i\E[%p1%d;%p2%dr, cup=%i\E[%p1%d;%p2%dH,
23447 cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23448 hts=\EH, il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23449 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
23450 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
23451 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
23452 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
23453 smul=\E[4m, tbc=\E[3g, use=ansi+local1, use=vt220+cvis,
23454 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
23456 cols#80, it#8, lines#24,
23457 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23458 csr=%i\E[%p1%d;%p2%dr, cup=%i\E[%p1%d;%p2%dH,
23459 cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23460 hts=\EH, il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23461 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
23462 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
23463 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
23464 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
23465 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+local1,
23467 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
23468 cols#132, use=ti924,
23469 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
23470 cols#132, use=ti924-8,
23471 ti931|Texas Instruments 931 VDT,
23474 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
23475 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23476 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
23477 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
23478 is2=\EGB\E(@B@@\E), kdch1=\EQ, kdl1=\EO, kf1=\Ei1,
23479 kf2=\Ei2, kf3=\Ei3, kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7,
23480 kf8=\Ei8, kf9=\Ei9, kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb,
23481 rmso=\E4@, rmul=\E4@, sgr0=\E4@, smso=\E4A, smul=\E4D,
23483 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
23484 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
23485 # (ti926-8: I corrected this from the broken SCO entry -- esr)
23486 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
23487 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
23488 ti_ansi|basic entry for ti928,
23489 am, bce, eo, xenl, xon,
23490 colors#8, cols#80, it#8, lines#25, pairs#64,
23491 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
23492 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
23493 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, ed=\E[J,
23494 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
23495 kend=\E[F, kf0=\E[V, kf1=\E[M, kf2=\E[N, kf3=\E[O, kf4=\E[P,
23496 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, knp=\E[G,
23497 kpp=\E[I, op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
23498 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
23499 smso=\E[7m, smul=\E[4m, use=ansi+arrows, use=ansi+local1,
23501 # 928 VDT 7 bit control mode
23503 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
23504 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
23505 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
23506 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
23507 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
23508 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
23510 # 928 VDT 8 bit control mode
23512 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
23513 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
23514 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
23515 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
23516 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
23517 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
23518 kpp=\233T, kprt=\23335~, use=ti_ansi,
23523 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
23524 # had just <smso>=\EG6 which I think means standout was supposed to be
23525 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
23526 # <invis> might work-- esr)
23527 zen30|z30|Zentec 30,
23530 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23531 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
23532 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
23533 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
23534 smul@, use=adm+sgr,
23535 # (zen50: this had extension capabilities
23536 # :BS=^U:CL=^V:CR=^B:
23537 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
23538 # which were also in the original entry -- esr)
23539 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
23540 zen50|z50|Zentec Zephyr,
23542 cols#80, lines#24, xmc#1,
23543 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
23544 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
23545 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
23546 rmul@, smul@, use=adm+sgr,
23548 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
23549 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
23552 blink=\EM", clear=\EH\EJ, cnorm=\EP,
23553 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
23554 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
23555 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
23556 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, khome=\EH,
23557 mc4=^T, mc5=^R, rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s,
23558 sgr0=\EM\s, smso=\EM$, smul=\EM0, use=vt52+arrows,
23560 ######## OBSOLETE UNIX CONSOLES
23563 #### Apollo consoles
23565 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
23566 # labeled HP700s now.
23569 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
23570 apollo|Apollo console,
23573 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
23574 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
23575 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
23576 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
23577 smso=\ES, smul=\EU, vpa=\EO+\s,
23579 # We don't know whether or not the apollo guys replicated DEC's firmware bug
23580 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
23581 # both these capabilities.
23582 apollo+vt132|Apollo console emulating VT132,
23583 rmir@, smir@, use=vt132,
23585 apollo_15P|Apollo 15 inch display,
23587 apollo_19L|Apollo 19 inch display,
23589 apollo_color|Apollo color display,
23594 # This actually describes the generic SVr4 display driver for Intel boxes.
23595 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
23596 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
23597 att6386|at386|386at|AT&T WGS 6386 console,
23600 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23601 bel=^G, civis=\E[=C, clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r,
23602 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
23603 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J,
23604 el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@,
23605 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
23606 is2=\E[0;10;39m, kcbt=^], kdch1=\E[P, kend=\E[Y, kf1=\EOP,
23607 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
23608 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
23609 kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S,
23610 rc=\E8, ri=\E[T, rmacs=\E[10m, sc=\E7,
23611 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
23612 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
23613 sgr0=\E[0;10m, smacs=\E[12m, vpa=\E[%i%p1%dd,
23614 use=ansi+arrows, use=ansi+inittabs, use=ansi+local,
23615 use=ansi+sgrbold, use=ecma+index, use=klone+color,
23617 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
23618 pc6300plus|AT&T 6300 plus,
23621 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
23622 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H,
23623 cup=\E[%i%p1%2d;%p2%2dH, dch1=\E[1P, dim=\E[2m,
23624 dl1=\E[1M, ed=\E[0J, el=\E[0K, home=\E[H, hts=\EH,
23625 ich1=\E[1@, il1=\E[1L, ind=\n, invis=\E[9m, kbs=^H,
23626 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc,
23627 kf10=\EOu, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
23628 kf7=\EOi, kf8=\EOj, kf9=\EOk, nel=\r\n, rev=\E[7m, rmso=\E[m,
23629 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
23632 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
23634 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
23635 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
23636 # is broken. All the special key sequences are broken, making it unusable
23637 # with Emacs. The problem stems from the following:
23639 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
23640 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
23641 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
23642 # uses resizable terminal windows, but the bundled terminal program always
23643 # uses an 80x24 window (and doesn't support seem to support a 132-column
23646 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
23647 # library which was a superset of SVr3.5 curses (called tam, for "terminal
23648 # access method".) tam includes support for real, overlapping windows,
23649 # onscreen function key labels, and bitmap graphics. But since the primary
23650 # user interface on the UNIX PC was a GUI program (ua, for "user
23651 # assistant",) and remote administration was considered important for the
23652 # machine, tam also supported VT100-compatible terminals attached to the
23653 # serial port or used across the StarLan network. To simulate the extra keys
23654 # not present on a VT100, users could press ESC and a two-letter sequence,
23655 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
23656 # however, were not the same as those sent by the actual Undo key. The
23657 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
23658 # (If you're interested in adding some of the tam calls to ncurses, btw, I
23659 # have the full documentation and several programs which use tam. It also
23660 # used an extended terminfo format to describe key sequences, special
23661 # highlighting modes, etc.)
23663 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
23664 # there are two sequences for every key-modifier combination (local keyboard
23665 # sequence and remote "VT100" sequence.) But I doubt many people are trying
23666 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
23667 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
23668 # seem to have been built from the manual describing the VT100 sequences.
23669 # This means it doesn't work for a real live UNIX PC.
23671 # FONTS: The UNIX PC also has a strange interpretation of "alternate
23672 # character set". Rather than the VT100 graphics you might expect, it allows
23673 # up to 8 custom fonts to be loaded at any given time. This means that
23674 # programs expecting VT100 graphics will usually be disappointed. For this
23675 # reason I have disabled the smacs/rmacs sequences, but they could easily be
23676 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
23677 # manpage), should you wish to do so:
23679 # SGR10 - Select font 0 - ESC [ 10 m or SO
23680 # SGR11 - Select font 1 - ESC [ 11 m or SI
23681 # SGR12 - Select font 2 - ESC [ 12 m
23683 # SGR17 - Select font 7 - ESC [ 17 m
23685 # Graphics for line drawing are not reliably found at *any* character
23686 # location because the UNIX PC has dynamically reloadable fonts. I use font
23687 # 0 for regular text and font 1 for italics, but this is by no means
23688 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
23690 # MISC: The cursor visible/cursor invisible sequences were swapped in the
23691 # distributed terminfo.
23693 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
23694 # the UNIX PC terminfo entry. The modified version works great with Lynx,
23695 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
23696 # attached by serial cable. In Emacs, even the Undo key works, and many
23697 # applications can now use the F1-F8 keys.
23700 # Terminfo entry for the AT&T Unix PC 7300
23701 # from escape(7) in Unix PC 7300 Manual.
23702 # Somewhat similar to a vt100-am (but different enough
23703 # to redo this from scratch.)
23705 # /***************************************************************
23707 # * FONT LOADING PROGRAM FOR THE UNIX PC
23709 # * This routine loads a font defined in the file ALTFONT
23710 # * into font memory slot #1. Once the font has been loaded,
23711 # * it can be used as an alternative character set.
23713 # * The call to ioctl with the argument WIOCLFONT is the key
23714 # * to this routine. For more information, see window(7) in
23715 # * the PC 7300 documentation.
23716 # ***************************************************************/
23717 # #include <string.h> /* needed for strcpy call */
23718 # #include <sys/window.h> /* needed for ioctl call */
23719 # #define FNSIZE 60 /* font name size */
23720 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
23722 # * The file /usr/lib/wfont/special.8.ft comes with the
23723 # * standard PC software. It defines a graphics character set
23724 # * similar to that of the Teletype 5425 terminal. To view
23725 # * this or other fonts in /usr/lib/wfont, use the command
23726 # * cfont <filename>. For further information on fonts see
23727 # * cfont(1) in the PC 7300 documentation.
23730 # struct altfdata /* structure for alt font data */
23732 # short altf_slot; /* memory slot number */
23733 # char altf_name[FNSIZE]; /* font name (file name) */
23737 # int wd; /* window in which altfont will be */
23738 # struct altfdata altf;
23739 # altf.altf_slot=1;
23740 # strcpy(altf.altf_name,ALTFONT);
23741 # for (wd =1; wd < 12; wd++) {
23742 # ioctl(wd, WIOCLFONT,&altf);
23746 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
23747 # they're confirmed by the man page for the System V display---esr)
23749 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
23751 cols#80, it#8, lines#24,
23752 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
23753 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub1=^H,
23754 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dim=\E[2m, ed=\E[0J,
23755 el=\E[0K, home=\E[H, ich1=\E[@, ind=\n, invis=\E[9m,
23756 is1=\017\E[=1w, kBEG=\ENB, kCAN=\EOW, kCPY=\END, kCRT=\EON,
23757 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kFND=\EOX,
23758 kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, kMOV=\ENC,
23759 kNXT=\ENH, kOPT=\EOR, kPRV=\ENG, kRDO=\EOT, kRIT=\ENL,
23760 kRPL=\EOY, kSAV=\EOO, kUND=\EOS, kbeg=\ENb, kcan=\EOw,
23761 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
23762 kcrt=\EOn, kdch1=\ENf, ked=\E[J, kel=\EOa, kend=\E0,
23763 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
23764 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
23765 kich1=\ENj, kind=\E[B, kmov=\ENc, kmrk=\ENi, knp=\E[U,
23766 knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz,
23767 kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, kri=\E[A,
23768 krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kund=\EOs,
23769 nel=\EE, rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m,
23770 sgr0=\E[0;10m, smso=\E[7m, smul=\E[4m, use=ansi+arrows,
23771 use=ansi+idl, use=ansi+local,
23773 #### Convergent Technology
23775 # Burroughs bought Convergent shortly before it merged with Univac.
23776 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
23777 # from 1991 or earlier).
23780 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
23781 # (aws: removed unknown :dn=^K: -- esr)
23782 aws|Convergent Technologies AWS workstation under UTX and Xenix,
23784 OTug#0, cols#80, lines#28, xmc#0,
23785 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
23786 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
23787 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
23788 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
23789 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
23790 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
23792 awsc|Convergent Technologies AWS workstation under CTOS,
23794 OTug#0, cols#80, lines#24, xmc#0,
23795 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
23796 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
23797 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
23798 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
23804 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
23805 # The digital uVax II's had a graphic display called a qdss. It was
23806 # supposed to be a high performance graphic accelerator, but it was
23807 # late to market and barely appeared before faster dumb frame buffers
23808 # appeared. I have only used this display while running X11. However,
23809 # during bootup, it was in text mode, and probably had a terminal emulator
23810 # within it. And that is what your termcap entry is for. In graphics
23811 # mode the screen size is 1024x864 pixels.
23812 qdss|qdcons|qdss glass tty,
23814 cols#128, lines#57,
23815 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
23816 cup=\E=%p1%c%p2%c, cuu1=^K,
23818 #### Fortune Systems consoles
23820 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
23821 # in their day; I (esr) used one myself for a year or so around 1984.
23822 # They had no graphics, though, and couldn't compete against Suns and
23826 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
23827 # (This had extension capabilities
23828 # :rv=\EH:re=\EI:rg=0:GG=0:\
23829 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
23830 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
23831 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
23832 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
23833 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
23834 # to force both magic cookie glitches off. Once upon a time, I
23835 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
23836 # function keys; thus the "Al" value for HM was certainly an error. I renamed
23837 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
23838 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
23839 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
23840 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
23841 fos|fortune|Fortune system,
23844 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
23845 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
23846 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
23847 cvvis=\E:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>,
23848 el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>,
23849 il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H, kcub1=^Aw\r,
23850 kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r,
23851 kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r,
23852 kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r,
23853 knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH, rmacs=^O, rmso=^\I`,
23854 rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP,
23856 #### Masscomp consoles
23858 # Masscomp has gone out of business. Their product line was purchased by a
23859 # company in Georgia (US) called "XS International", parts and service may
23860 # still be available through them.
23863 # (masscomp: ":MT:" changed to ":km:"; -- esr)
23864 masscomp|masscomp workstation console,
23866 cols#80, it#8, lines#24,
23867 clear=\E[2J, cub1=^H, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P,
23868 dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
23869 is2=\EGc\EGb\EGw, kbs=^H, kcub1=\EOD, kcud1=\EOB,
23870 kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, rmso=\E[m, rmul=\EGau,
23871 smir=\E[4h, smso=\E[7m, smul=\EGu, use=ansi+local1,
23872 masscomp1|masscomp large screen version 1,
23873 cols#104, lines#36, use=masscomp,
23874 masscomp2|masscomp large screen version 2,
23875 cols#64, lines#21, use=masscomp,
23880 # OSF/1 1.1 Snapshot 2
23881 pmcons|pmconsole|PMAX console,
23883 cols#128, lines#57,
23884 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
23885 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
23886 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
23888 #### Other consoles
23889 # The following is a version of the ibm-pc entry distributed with PC/IX,
23890 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
23891 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
23892 # (the former is untrue, and the latter failed under UCB/man); standout and
23893 # underline modes have been added. Note: this entry describes the "native"
23894 # capabilities of the PC monochrome display, without ANY emulation; most
23895 # communications packages (but NOT PC/IX connect) do some kind of emulation.
23896 pcix|PC/IX console,
23899 clear=\Ec, cub1=^H, cup=\E[%i%p1%2d;%p2%2dH, ed=\E[J,
23900 el=\E[K, home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23901 smso=\E[7m, smul=\E[4m, use=ansi+local1,
23903 # (ibmpcx: this entry used to be known as ibmx.
23904 # It formerly included the following extension capabilities:
23905 # :GC=b:GL=v:GR=t:RT=^J:\
23906 # :GH=\E[196g:GV=\E[179g:\
23907 # :GU=\E[193g:GD=\E[194g:\
23908 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
23909 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
23910 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
23911 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
23912 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
23913 # what was there before. -- esr)
23914 ibmpcx|xenix|ibmx|IBM PC xenix console display,
23917 clear=^L, cub1=^H, cup=\E[%p1%d;%p2%dH, dch1=\E[P,
23918 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L,
23919 kend=\E[d, kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N,
23920 khome=\E[Y, knp=\E[e, kpp=\E[Z, use=ansi+arrows,
23921 use=ansi+local1, use=klone+acs, use=klone+sgr8,
23923 ######## OTHER OBSOLETE TYPES
23925 # These terminals are *long* dead -- these entries are retained for
23926 # historical interest only.
23929 #### Obsolete non-ANSI software emulations
23932 # CTRM terminal emulator
23933 # 1. underlining is not allowed with colors: first, is is simulated by
23934 # black on white, second, it disables background color manipulations.
23935 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
23936 # so we have to save their status in the static registers A, B and H
23937 # respectively, to be able to restore them when color changes
23938 # (because any color change turns off ALL attributes)
23939 # 3. <bold> and <rev> sequences alternate modes,
23940 # rather than simply entering them. Thus we have to check the
23941 # static register B and H to determine the status, before sending the
23943 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
23944 # and then reset colors
23945 # 5. implementation of the protect mode would badly penalize the performance.
23946 # we would have to use \E&bn sequence to turn off colors (as well as all
23947 # other attributes), and keep the status of protect mode in yet another
23948 # static variable. If someone really needs this mode, they would have to
23949 # create another terminfo entry.
23950 # 6. original color-pair is white on black.
23951 # store the information about colors into static registers
23952 # 7. set foreground color. it performs the following steps.
23953 # 1) turn off all attributes
23954 # 2) turn on the background and video attributes that have been turned
23955 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
23956 # 3) turn on foreground attributes
23957 # 4) store information about foreground into U,V,W static registers
23958 # 8. turn on background: similar to turn on foreground above
23959 ctrm|C terminal emulator,
23961 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
23962 pairs#63, pb#19200, vt#6,
23963 bel=^G, blink=\E&dA%{1}%PA,
23964 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
23965 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23966 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
23967 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
23968 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
23969 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, khome=\Ep\r,
23970 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
23972 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
23973 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
23974 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
23975 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
23976 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
23977 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
23978 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
23979 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
23980 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
23981 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
23982 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
23984 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
23985 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
23988 # gs6300 - can't use blue foreground, it clashes with underline;
23989 # it's simulated with cyan
23990 # Bug: The <op> capability probably resets attributes.
23991 # (gs6300: commented out <rmln> (no <smln>) --esr)
23992 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
23993 am, bce, msgr, xon,
23994 colors#8, cols#80, it#8, lines#24, pairs#63,
23995 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
23997 bel=^G, blink=\E[5m, bold=\E[1m, cr=\r, cub1=^H, cud1=\n,
23998 cup=\E[%i%p1%d;%p2%dH, dch=\E[%p1%dP, dch1=\E[P,
23999 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, ind=\n, is2=\E[m,
24000 kcbt=^R^I, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, kf4=\E[23s,
24001 kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, mc4=\E[4i,
24002 mc5=\E[5i, op=\E[?;m, rev=\E[7m, ri=\E[L, rmacs=\E[10m,
24003 rs1=\Ec, setb=\E[?;%p1%dm,
24004 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
24005 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
24006 use=ansi+arrows, use=ansi+erase, use=ansi+idl,
24009 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
24010 # MS-Kermit with Heath-19 emulation mode enabled
24011 # (h19k: changed ":pt@:" to ":it@"
24012 h19k|h19kermit|Heathkit emulation provided by Kermit (no auto margin),
24017 # Apple Macintosh with VersaTerm, a terminal emulator distributed by Synergy
24018 # Software (formerly Peripherals Computers & Supplies, Inc) of
24019 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
24020 # also be reached at support@synergy.com.
24021 versaterm|VersaTerm VT100 emulator for the Macintosh,
24023 cols#80, it#8, lines#24,
24024 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
24025 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
24026 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
24027 cuu1=\E[A$<2/>, dch1=\E[1P$<7/>, dl1=\E[1M$<9/>,
24028 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
24029 ich1=\E[1@$<7/>, il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H,
24030 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
24031 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\n,
24032 rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
24033 ri=\EM$<5/>, rmkx=\E>\E[?1l, rmso=\E[m$<2/>,
24034 rmul=\E[m$<2/>, rs1=\E>, sgr0=\E[m$<2/>, smkx=\E=\E[?1h,
24035 smso=\E[7m$<2/>, smul=\E[4m$<2/>, use=ansi+csr,
24037 # From: Rick Thomas <ihnp4!btlunix!rbt>
24038 # (xtalk: I added <rmam>/<smam> based on the init string.
24039 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
24040 am, mir, msgr, xon,
24041 cols#80, it#8, lines#24, vt#3, xmc#1,
24042 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
24043 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub1=^H, cud1=\n,
24044 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
24045 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
24046 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
24047 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
24048 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
24049 rmkx=\E[?1l\E>, rmso=\E[m\s,
24050 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
24051 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
24052 tbc=\E[3g, use=ansi+local, use=vt100+fnkeys,
24054 # The official PC terminal emulator program of the AT&T Product Centers.
24055 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
24056 simterm|attpc running simterm,
24059 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
24060 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
24061 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
24062 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
24064 #### Daisy wheel printers
24066 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
24067 # wheel terminals. These are now largely obsolete.
24070 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
24071 diablo1620|diablo1720|diablo450|ipsi|Diablo 1620,
24074 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
24075 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
24076 diablo1620-m8|diablo1640-m8|Diablo 1620 w/8 column left margin,
24078 is2=\r \E9, use=diablo1620,
24079 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
24080 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|Diablo 1640,
24081 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
24083 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
24085 diablo1640-lm|diablo-lm|xerox-lm|Diablo 1640 with indented left margin,
24087 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
24088 diablo1740-lm|630-lm|1730-lm|x1700-lm|Diablo 1740 printer,
24090 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
24091 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
24092 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
24093 # If no tab is set or the terminal's in a bad mood, it glitches the screen
24094 # around all of memory. Note that return puts a blank ("a return character")
24095 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
24096 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
24097 # curses won't work (some old BSD versions) because it doesn't clear this bit,
24098 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
24099 # I have been unable to get tabs set in all 96 lines - it always leaves at
24100 # least one line with no tabs in it, and once you tab through that line,
24101 # it completely weirds out.
24102 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
24105 cols#80, lines#24, lm#96,
24106 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
24107 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
24108 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
24109 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
24110 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
24114 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24115 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24116 gsi|mystery gsi terminal,
24119 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
24121 aj830|aj832|aj|Anderson Jacobson,
24123 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
24125 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
24126 aj510|Anderson-Jacobson model 510,
24129 clear=^L, cub1=^H, cuf1=\EX,
24130 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
24131 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
24132 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
24133 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
24134 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
24136 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
24137 # This is incomplete, but it's a start.
24138 nec5520|nec|spinwriter|NEC 5520,
24141 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
24142 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
24144 qume5|qume|Qume Sprint 5,
24147 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24148 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24149 # I suspect the Xerox 1720 is the same as the Diablo 1620.
24150 xerox1720|x1720|x1750|Xerox 1720,
24153 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
24156 #### Miscellaneous obsolete terminals, manufacturers unknown
24158 # If you have any information about these (like, a manufacturer's name,
24159 # and a date on the serial-number plate) please send it!
24161 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
24164 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
24165 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
24168 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
24169 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
24170 kf4=\E8, rmso=\Em^C, smso=\Em^L,
24171 cops10|cops|cops-10|cops 10,
24174 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
24175 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
24176 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
24179 # http://www.bitsavers.org/pdf/datapro/alphanumeric_terminals/Datapro_C25_Datagraphix.pdf
24181 # DatagraphiX, Inc.
24182 # (a subsidiary of General Dynamics),
24183 # P.O. Box 82449, San Diego, California 92138.
24185 # (d132: removed duplicate :ic=\E5:,
24186 # merged in capabilities from a BRL entry -- esr)
24187 d132|datagraphix|DatagraphiX 132a,
24190 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
24191 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
24192 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
24193 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
24194 # The d800 was an early portable terminal from c.1984-85 that looked a lot
24195 # like the original Compaq `lunchbox' portable (but no handle). It had a VT220
24196 # mode (which is what this entry looks like) and several other lesser-known
24199 OTbs, am, da, db, msgr, xhp,
24200 cols#80, it#8, lines#24,
24201 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
24202 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
24203 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
24204 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
24205 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
24206 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
24207 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24208 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
24209 digilog|digilog 333,
24212 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
24214 # The DWK was a terminal manufactured in the Soviet Union c.1986
24215 dwk|dwk-vt|dwk terminal,
24217 acsc=+\^\,Q-S.M0\177`+a:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~
24219 clear=\EH\EJ, cub1=^H, cud1=\n, dch1=\EP, ich1=\EQ, kbs=^?,
24220 kdch1=\Ee, kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4,
24221 kf5=\Ef5, kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed,
24222 knp=\Eh, kpp=\Eg, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
24223 sgr0=\EX, smacs=\EF, smso=\ET, use=vt52-basic,
24224 env230|envision230|envision 230 graphics terminal,
24226 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
24227 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
24229 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
24230 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
24231 # coupler attached, the whole rig fitting in a suitcase and more or less
24232 # portable. Hot stuff for c.1977 :-) -- esr
24233 ep48|ep4080|execuport 4080,
24236 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
24237 ep40|ep4000|execuport 4000,
24238 cols#136, use=ep4080,
24239 # Adam Thompson <athompso@pangea.ca> tells us:
24240 # Informer series - these are all portable units, resembling older
24241 # automatic bread-baking machines. The terminal looks like a `clamshell'
24242 # design, but isn't. The structure is similar to the Direct terminals,
24243 # but only half the width. The entire unit is only about 10" wide.
24244 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
24245 # keyboard. All the keys are crammed together, much like some laptop
24246 # PCs today, but perhaps less well organized...all these units have a
24247 # bewildering array of plugs on the back, including a built-in modem.
24248 # The 305 was a color version of the 304; the 306 and 307 were mono and
24249 # color terminals built for IBM bisync protocols.
24250 # From: Paul Leondis <unllab@amber.berkeley.edu>
24251 ifmr|Informer D304,
24254 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
24255 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
24256 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
24258 # Entry largely based on wy60 and has the features of wy60ak.
24259 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
24260 am, bw, hs, km, mir, msgr, ul, xon,
24261 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
24262 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
24263 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
24264 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
24265 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
24266 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
24267 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
24269 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
24270 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
24272 kHOM=\E{, kcbt=\EI, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
24273 kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
24274 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
24275 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
24276 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
24277 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, mc0=\EP,
24278 mc4=^T, mc5=^R, nel=\r\n$<3>,
24279 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
24280 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
24281 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
24282 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
24283 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
24284 rs3=\EwG\Ee($<150>,
24285 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
24286 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
24287 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
24288 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
24289 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
24291 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
24292 uc=\EG8\EG0, use=ansi+arrows, use=adm+sgr,
24294 teletec|Teletec Datascreen,
24297 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
24299 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
24300 # This description is for the LANPAR Technologies VISION 3220
24301 # terminal from 1984/85. The function key definitions k0-k5 represent the
24302 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
24303 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
24305 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
24306 # I had a couple of scopes (3221) like this once where I used to work, around
24307 # the 1987 time frame if memory serves me correctly. These scopes were made
24308 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
24309 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
24310 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
24311 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
24312 # (3221) cost about $1500 each, and one was always broken -- had to be sent
24313 # back to the shop for repairs.
24314 # The only real advantage these scopes had over the VT-240's were:
24315 # 1) They were faster in the Regis display, or at least the ones I did
24316 # 2) They had a handy debugging feature where you could split-screen the
24317 # scope, the graphics would appear on the top, and the REGIS commands would
24318 # appear on the bottom. I don't remember the VT-240s being able to do that.
24319 # I would swear that LANPAR Technologies was in MA someplace, but since I
24320 # don't work at the same place anymore, and those terminals and manuals were
24321 # long since junked, I cannot be any more sure than that.
24323 # (v3220: removed obsolete ":kn#10:",
24324 # I added <rmam>/<smam> based on the init string -- esr)
24325 v3220|LANPAR Vision II model 3220/3221/3222,
24326 OTbs, am, mir, xenl,
24327 cols#80, it#8, lines#24,
24328 cub1=^H, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, ht=^I,
24329 il1=\E[L, is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D,
24330 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~,
24331 kf2=\E[3~, kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP,
24332 kf7=\E[OQ, kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM,
24333 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
24334 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m,
24335 smul=\E[4m, use=ansi+erase, use=ansi+local1,
24336 ######## ICH/ICH1 VERSUS RMIR/SMIR
24338 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
24339 # are present; the symptom is doubled characters in an update using insert.
24340 # These applications are technically correct; in both 4.3BSD termcap and
24341 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
24342 # unless the terminal needs both. To my knowledge, no terminal still in this
24343 # file requires both other than the very obsolete dm2500.
24345 # For ncurses-based applications this is not a problem, as ncurses uses
24346 # one or the other as appropriate but never mixes the two. Therefore we
24347 # have not corrected entries like `linux' and `xterm' that specify both.
24348 # If you see doubled characters from these, use the linux-nic and xterm-nic
24349 # entries that suppress ich/ich1. And upgrade to ncurses!
24352 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
24354 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
24355 # ECMA-48 standards are said to be almost identical, but are not the same
24356 # as X3.64 (though for practical purposes they are close supersets of it).
24358 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
24359 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
24360 # Coded Character Sets"), include your snail-mail address, and you should
24361 # receive the document in due course. Don't expect an email acknowledgment.
24363 # Related standards include "X3.4-1977: American National Standard Code for
24364 # Information Interchange" (the ASCII standard) and "X3.41.1974:
24365 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
24366 # American National Standard for Information Interchange." I believe (but
24367 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
24371 #### VT100/ANSI/ECMA-48
24373 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
24374 # and ECMA-48 Control Functions for Coded Character Sets.
24376 # Much of the content of this comment is adapted from a table prepared by
24377 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
24378 # discussion of some terminfo-related issues, and updates to capture ECMA-48
24379 # have been added. Control functions described in ECMA-48 only are tagged
24380 # with * after their names.
24382 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
24383 # sequences. In the main table, \E stands for an escape (\033) character,
24384 # SPC for space. Pn stands for a single numeric parameter to be inserted
24385 # in decimal ASCII. Ps stands for a list of such parameters separated by
24386 # semicolons. Parameter meanings for most parameterized sequences are
24387 # described in the notes.
24389 # Sequence Sequence Parameter or
24390 # Mnemonic Name Sequence Value Mode terminfo
24391 # -----------------------------------------------------------------------------
24392 # APC Applicatn Program Command \E _ - Delim -
24393 # BEL Bell * ^G - - bel
24394 # BPH Break Permitted Here * \E B - * -
24395 # BS BackSpace * ^H - EF -
24396 # CAN Cancel * ^X - - - (A)
24397 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
24398 # CCH Cancel Previous Character \E T - - -
24399 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
24400 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
24401 # CMD Coding Method Delimiter * \E
24402 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
24403 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
24404 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
24405 # CSI Control Sequence Intro \E [ - Intro -
24406 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
24407 # CUB Cursor Backward \E [ Pn D 1 eF cub
24408 # CUD Cursor Down \E [ Pn B 1 eF cud
24409 # CUF Cursor Forward \E [ Pn C 1 eF cuf
24410 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
24411 # CUU Cursor Up \E [ Pn A 1 eF cuu
24412 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
24413 # DA Device Attributes \E [ Pn c 0 - -
24414 # DAQ Define Area Qualification \E [ Ps o 0 - -
24415 # DCH Delete Character \E [ Pn P 1 eF dch
24416 # DCS Device Control String \E P - Delim -
24417 # DL Delete Line \E [ Pn M 1 eF dl
24418 # DLE Data Link Escape * ^P - - -
24419 # DMI Disable Manual Input \E \ - Fs -
24420 # DSR Device Status Report \E [ Ps n 0 - - (I)
24421 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
24422 # EA Erase in Area \E [ Ps O 0 eF - (J)
24423 # ECH Erase Character \E [ Pn X 1 eF ech
24424 # ED Erase in Display \E [ Ps J 0 eF ed (J)
24425 # EF Erase in Field \E [ Ps N 0 eF -
24426 # EL Erase in Line \E [ Ps K 0 eF el (J)
24427 # EM End of Medium * ^Y - - -
24428 # EMI Enable Manual Input \E b Fs -
24429 # ENQ Enquire ^E - - -
24430 # EOT End Of Transmission ^D - * -
24431 # EPA End of Protected Area \E W - - - (K)
24432 # ESA End of Selected Area \E G - - -
24433 # ESC Escape ^[ - - -
24434 # ETB End Transmission Block ^W - - -
24435 # ETX End of Text ^C - - -
24436 # FF Form Feed ^L - - -
24437 # FNK Function Key * \E [ Pn SPC W - - -
24438 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
24439 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
24440 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
24441 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
24442 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
24443 # HPB Char Position Backward \E [ j 1 FE -
24444 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
24445 # HT Horizontal Tab * ^I - FE - (N)
24446 # HTJ Horz Tab w/Justification \E I - FE -
24447 # HTS Horizontal Tab Set \E H - FE hts
24448 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
24449 # ICH Insert Character \E [ Pn @ 1 eF ich
24450 # IDCS ID Device Control String \E [ SPC O - * -
24451 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
24452 # IL Insert Line \E [ Pn L 1 eF il
24453 # IND Index \E D - FE -
24454 # INT Interrupt \E a - Fs -
24455 # JFY Justify \E [ Ps SPC F 0 FE -
24456 # IS1 Info Separator #1 * ^_ - * -
24457 # IS2 Info Separator #1 * ^^ - * -
24458 # IS3 Info Separator #1 * ^] - * -
24459 # IS4 Info Separator #1 * ^\ - * -
24460 # LF Line Feed ^J - - -
24461 # LS1R Locking Shift Right 1 * \E ~ - - -
24462 # LS2 Locking Shift 2 * \E n - - -
24463 # LS2R Locking Shift Right 2 * \E } - - -
24464 # LS3 Locking Shift 3 * \E o - - -
24465 # LS3R Locking Shift Right 3 * \E | - - -
24466 # MC Media Copy \E [ Ps i 0 - - (S)
24467 # MW Message Waiting \E U - - -
24468 # NAK Negative Acknowledge * ^U - * -
24469 # NBH No Break Here * \E C - - -
24470 # NEL Next Line \E E - FE nel (D)
24471 # NP Next Page \E [ Pn U 1 eF -
24472 # NUL Null * ^@ - - -
24473 # OSC Operating System Command \E ] - Delim -
24474 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
24475 # PFS Page Format Selection * \E Pn SPC J 0 - -
24476 # PLD Partial Line Down \E K - FE - (T)
24477 # PLU Partial Line Up \E L - FE - (U)
24478 # PM Privacy Message \E ^ - Delim -
24479 # PP Preceding Page \E [ Pn V 1 eF -
24480 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
24481 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
24482 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
24483 # PTX Parallel Texts * \E [ \ - - -
24484 # PU1 Private Use 1 \E Q - - -
24485 # PU2 Private Use 2 \E R - - -
24486 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
24487 # REP Repeat Char or Control \E [ Pn b 1 - rep
24488 # RI Reverse Index \E M - FE - (V)
24489 # RIS Reset to Initial State \E c - Fs -
24490 # RM Reset Mode * \E [ Ps l - - - (W)
24491 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
24492 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
24493 # SCI Single-Char Introducer \E Z - - -
24494 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
24495 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
24496 # SD Scroll Down \E [ Pn T 1 eF rin
24497 # SDS Start Directed String * \E [ Pn ] 1 - -
24498 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
24499 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
24500 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
24501 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
24502 # SI Shift In ^O - - - (P)
24503 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
24504 # SL Scroll Left \E [ Pn SPC @ 1 eF -
24505 # SLH Set Line Home * \E [ Pn SPC U - - -
24506 # SLL Set Line Limit * \E [ Pn SPC V - - -
24507 # SLS Set Line Spacing * \E [ Pn SPC h - - -
24508 # SM Select Mode \E [ Ps h none - - (W)
24509 # SO Shift Out ^N - - - (Q)
24510 # SOH Start Of Heading * ^A - - -
24511 # SOS Start of String * \E X - - -
24512 # SPA Start of Protected Area \E V - - - (Z)
24513 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
24514 # SPH Set Page Home * \E [ Ps SPC G - - -
24515 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
24516 # SPL Set Page Limit * \E [ Ps SPC j - - -
24517 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
24518 # SR Scroll Right \E [ Pn SPC A 1 eF -
24519 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
24520 # SRS Start Reversed String * \E [ Ps [ 0 - -
24521 # SSA Start of Selected Area \E F - - -
24522 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
24523 # SSW Set Space Width * \E [ Pn SPC [ none - -
24524 # SS2 Single Shift 2 (G2 set) \E N - Intro -
24525 # SS3 Single Shift 3 (G3 set) \E O - Intro -
24526 # ST String Terminator \E \ - Delim -
24527 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
24528 # STS Set Transmit State \E S - - -
24529 # STX Start pf Text * ^B - - -
24530 # SU Scroll Up \E [ Pn S 1 eF indn
24531 # SUB Substitute * ^Z - - -
24532 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
24533 # SYN Synchronous Idle * ^F - - -
24534 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
24535 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
24536 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
24537 # TBC Tab Clear \E [ Ps g 0 FE tbc
24538 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
24539 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
24540 # TSS Thin Space Specification \E [ Pn SC E none FE -
24541 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
24542 # VPB Line Position Backward * \E [ Pn k 1 FE -
24543 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
24544 # VT Vertical Tabulation * ^K - FE -
24545 # VTS Vertical Tabulation Set \E J - FE -
24547 # ---------------------------------------------------------------------------
24551 # Some control characters are listed in the ECMA-48 standard without
24552 # being assigned functions relevant to terminal control there (they
24553 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
24554 # here anyway for completeness.
24556 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
24558 # (B) There seems to be some confusion abroad between CHA and HPA. Most
24559 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
24560 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
24561 # preserved the CHA abbreviation.
24563 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
24564 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
24565 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
24566 # CHT abbreviation.
24568 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
24570 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
24573 # (F) CTC parameter values:
24574 # 0 = set char tab,
24575 # 1 = set line tab,
24576 # 2 = clear char tab,
24577 # 3 = clear line tab,
24578 # 4 = clear all char tabs on current line,
24579 # 5 = clear all char tabs,
24580 # 6 = clear all line tabs.
24582 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
24583 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
24584 # Position Absolute" but retains the HVP abbreviation.
24586 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
24589 # (I) DSR parameter values:
24592 # 2 = busy, will send DSR later,
24594 # 4 = malfunction, will send DSR later,
24596 # 6 = request CPR response.
24598 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
24599 # 0 = clear to end,
24600 # 1 = clear from beginning,
24603 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
24605 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
24607 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
24608 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
24609 # Position Relative" but retains the HPR abbreviation.
24611 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
24614 # (O) SGR parameter values:
24615 # 0 = default mode (attributes off),
24622 # 7 = reverse video,
24624 # 9 = crossed-out (marked for deletion),
24625 # 10 = primary font,
24626 # 10 + n (n in 1..9) = nth alternative font,
24628 # 21 = double underline,
24633 # 26 = proportional spacing,
24645 # 38 = set fg color as in CCITT T.416,
24646 # 39 = set default fg color,
24655 # 48 = set bg color as in CCITT T.416,
24656 # 49 = set default bg color,
24657 # 50 = turn off 26,
24661 # 54 = turn off 51 & 52,
24662 # 55 = not overlined,
24663 # 56-59 = reserved,
24664 # 61-65 = variable highlights for ideograms.
24666 # (P) SI is also called LSO, Locking Shift Zero.
24668 # (Q) SI is also called LS1, Locking Shift One.
24670 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
24671 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
24672 # Absolute' but retains the VPA abbreviation.
24674 # (S) MC parameters:
24675 # 0 = start xfer to primary aux device,
24676 # 1 = start xfer from primary aux device,
24677 # 2 = start xfer to secondary aux device,
24678 # 3 = start xfer from secondary aux device,
24679 # 4 = stop relay to primary aux device,
24680 # 5 = start relay to primary aux device,
24681 # 6 = stop relay to secondary aux device,
24682 # 7 = start relay to secondary aux device.
24684 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
24687 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
24690 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
24692 # (W) RM/SM modes are as follows:
24693 # 1 = Guarded Area Transfer Mode (GATM),
24694 # 2 = Keyboard Action Mode (KAM),
24695 # 3 = Control Representation Mode (CRM),
24696 # 4 = Insertion Replacement Mode (IRM),
24697 # 5 = Status Report Transfer Mode (SRTM),
24698 # 6 = Erasure Mode (ERM),
24699 # 7 = Line Editing Mode (LEM),
24700 # 8 = Bi-Directional Support Mode (BDSM),
24701 # 9 = Device Component Select Mode (DCSM),
24702 # 10 = Character Editing Mode (HEM),
24703 # 11 = Positioning Unit Mode (PUM),
24704 # 12 = Send/Receive Mode (SRM),
24705 # 13 = Format Effector Action Mode (FEAM),
24706 # 14 = Format Effector Transfer Mode (FETM),
24707 # 15 = Multiple Area Transfer Mode (MATM),
24708 # 16 = Transfer Termination Mode (TTM),
24709 # 17 = Selected Area Transfer Mode (SATM),
24710 # 18 = Tabulation Stop Mode (TSM),
24711 # 19 = Editing Boundary Mode (EBM),
24712 # 20 = Line Feed New Line Mode (LF/NL),
24713 # 21 = Graphic Rendition Combination Mode (GRCM),
24714 # 22 = Zero Default Mode (ZDM).
24716 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
24717 # but are listed here for reference.
24719 # (X) Select Alternate Presentation Variants is used only for non-Latin
24722 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
24724 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
24727 # ---------------------------------------------------------------------------
24731 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
24732 # X3.64 Control Sequence Introducer is the two characters "Escape ["
24734 # Delim a Delimiter
24736 # x/y identifies a character by position in the ASCII table (column/row)
24738 # eF editor function (see explanation)
24740 # FE format effector (see explanation)
24742 # F is a Final character in
24743 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
24744 # a control sequence (F from 4/0 to 7/14)
24746 # Gs is a graphic character appearing in strings (Gs ranges from
24747 # 2/0 to 7/14) in the ASCII table
24749 # Ce is a control represented as a single bit combination in the C1 set
24750 # of controls in an 8-bit character set
24752 # C0 the familiar set of 7-bit ASCII control characters
24754 # C1 roughly, the set of control chars available only in 8-bit systems.
24755 # This is too complicated to explain fully here, so read Jim Fleming's
24756 # article in the February 1983 BYTE, especially pages 214 through 224.
24758 # Fe is a Final character of a 2-character Escape sequence that has an
24759 # equivalent representation in an 8-bit environment as a Ce-type
24760 # (Fe ranges from 4/0 to 5/15)
24762 # Fs is a Final character of a 2-character Escape sequence that is
24763 # standardized internationally with identical representation in 7-bit
24764 # and 8-bit environments and is independent of the currently
24765 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
24767 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
24770 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
24773 # Pn is a numeric parameter in a control sequence, a string of zero or
24774 # more characters ranging from 3/0 to 3/9 in the ASCII table
24776 # Ps is a variable number of selective parameters in a control sequence
24777 # with each selective parameter separated from the other by the code
24778 # 3/11 (which usually represents a semicolon); Ps ranges from
24779 # 3/0 to 3/9 and includes 3/11
24781 # * Not relevant to terminal control, listed for completeness only.
24783 # Format Effectors versus Editor Functions
24785 # A format effector specifies how following output is to be displayed.
24786 # An editor function allows you to modify the display. Informally
24787 # format effectors may be destructive; format effectors should not be.
24789 # For instance, a format effector that moves the "active position" (the
24790 # cursor or equivalent) one space to the left would be useful when you want to
24791 # create an overstrike, a compound character made of two standard characters
24792 # overlaid. Control-H, the Backspace character, is actually supposed to be a
24793 # format effector, so you can do this. But many systems use it in a
24794 # nonstandard fashion, as an editor function, deleting the character to the
24795 # left of the cursor and moving the cursor left. When Control-H is assumed to
24796 # be an editor function, you cannot predict whether its use will create an
24797 # overstrike unless you also know whether the output device is in an "insert
24798 # mode" or an "overwrite mode". When Control-H is used as a format effector,
24799 # its effect can always be predicted. The familiar characters carriage
24800 # return, linefeed, formfeed, etc., are defined as format effectors.
24802 # NOTES ON THE DEC VT100 IMPLEMENTATION
24804 # Control sequences implemented in the VT100 are as follows:
24806 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
24807 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
24809 # plus several private DEC commands.
24811 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
24813 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
24814 # Erase from beginning of line to cursor Esc [ 1 K
24815 # Erase line containing cursor Esc [ 2 K
24816 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
24817 # Erase from beginning of screen to cursor Esc [ 1 J
24818 # Erase entire screen Esc [ 2 J
24820 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
24821 # Esc [ 2 J, but this is wrong; the default is 0.
24823 # The VT100 responds to receiving the DA (Device Attributes) control
24825 # Esc [ c (or Esc [ 0 c)
24827 # by transmitting the sequence
24831 # where Ps is a character that describes installed options.
24833 # The VT100's cursor location can be read with the DSR (Device Status
24838 # The VT100 reports by transmitting the CPR sequence
24842 # where Pl is the line number and Pc is the column number (in decimal).
24844 # The specification for the DEC VT100 is document EK-VT100-UG-003.
24848 # Here is a description of the color and attribute controls supported in the
24849 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
24850 # terminal emulators for Intel boxes obey these. They are a proper subset
24851 # of the ECMA-48 escapes.
24853 # 0 all attributes off
24854 # 1 foreground bright
24856 # 5 blink on/background bright (not reliable with brown)
24858 # 8 set blank (non-display)
24859 # 10 set primary font
24860 # 11 set first alternate font (on PCs, display ROM characters 1-31)
24861 # 12 set second alternate font (on PCs, display IBM high-half chars)
24863 # Color attribute sets
24864 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
24865 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
24866 # Bright black becomes gray. Bright brown becomes yellow,
24867 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
24869 # * If the 5 attribute is on and you set a background color (40-47) it is
24870 # supposed to enable bright background.
24872 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
24873 # when you try to set a "bright brown" (yellow) background with attribute
24874 # 5 (you get a blinking yellow foreground instead). A few displays
24875 # (including the System V console) support an attribute 6 that undoes this
24876 # braindamage (this is required by iBCS2).
24878 # * Some older versions of ANSI.SYS have a bug that causes them to require
24879 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
24882 #### Intel Binary Compatibility Standard
24884 # For comparison, here are the capabilities implied by the Intel Binary
24885 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
24886 # These recommendations are optional. IBCS2 allows the leading escape to
24887 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
24888 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
24889 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
24890 # terminfo entry are followed with the corresponding capability in parens:
24892 # CSI <n>k disable (n=0) or enable (n=1) keyclick
24893 # CSI 2h lock keyboard
24894 # CSI 2i send screen as input
24895 # CSI 2l unlock keyboard
24896 # CSI 6m enable background color intensity
24897 # CSI <0-2>c reserved
24898 # CSI <0-59>m select graphic rendition
24899 # CSI <n>;<m>H (cup) cursor to line n and column m
24900 # CSI <n>;<m>f cursor to line n and column m
24901 # CSI <n>@ (ich) insert characters
24902 # CSI <n>A (cuu) cursor up n lines
24903 # CSI <n>B (cud) cursor down n lines
24904 # CSI <n>C (cuu) cursor right n characters
24905 # CSI <n>D (cud) cursor left n characters
24906 # CSI <n>E cursor down n lines and in first column
24907 # CSI <n>F cursor up n lines and in first column
24908 # CSI <n>G (hpa) position cursor at column n-1
24909 # CSI <n>J (ed) erase in display
24910 # CSI <n>K (el) erase in line
24911 # CSI <n>L (il) insert line(s)
24912 # CSI <n>P (dch) delete characters
24913 # CSI <n>S (indn) scroll up n lines
24914 # CSI <n>T (rin) scroll down n lines
24915 # CSI <n>X (ech) erase characters
24916 # CSI <n>Z (cbt) back up n tab stops
24917 # CSI <n>` cursor to column n on line
24918 # CSI <n>a (cuu) cursor right n characters
24919 # CSI <n>d (vpa) cursor to line n
24920 # CSI <n>e cursor down n lines and in first column
24921 # CSI <n>g (cbt) clear all tabs
24922 # CSI <n>z make virtual terminal n active
24923 # CSI ?7h (smam) turn automargin on
24924 # CSI ?7l (rmam) turn automargin off
24925 # CSI s save cursor position
24926 # CSI u restore cursor position to saved value
24927 # CSI =<c>A set overscan color
24928 # CSI =<c>F set normal foreground color
24929 # CSI =<c>G set normal background color
24930 # CSI =<c>H set reverse foreground color
24931 # CSI =<c>I set reverse foreground color
24932 # CSI =<c>J set graphic foreground color
24933 # CSI =<c>K set graphic foreground color
24934 # CSI =<n>g (dispc) display n from alternate graphics character set
24935 # CSI =<p>;<d>B set bell parameters
24936 # CSI =<s>;<e>C set cursor parameters
24937 # CSI =<x>D enable/disable intensity of background color
24938 # CSI =<x>E set/clear blink vs. bold background
24939 # CSI 7 (sc) (sc) save cursor position
24940 # CSI 8 (rc) (rc) restore cursor position to saved value
24941 # CSI H (hts) (hts) set tab stop
24942 # CSI Q<n><string> define function key string
24943 # (string must begin and end with delimiter char)
24944 # CSI c (clear) clear screen
24946 # The lack of any specification for attributes in SGR (among other things)
24947 # makes this a wretchedly weak standard. The table above is literally
24948 # everything iBSC2 has to say about terminal escape sequences; there is
24949 # no further discussion of their meaning or how to set the parameters
24950 # in these sequences at all.
24953 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
24955 # The historical termcap file entries were written primarily in 4.4BSD termcap.
24956 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
24957 # with the extension names chosen for compatibility with the termcap names
24958 # assigned in System V terminfo. There are some variant extension sets out
24959 # there. We try to describe them here.
24961 #### XENIX extensions:
24963 # The XENIX extensions include a set of function-key capabilities as follows:
24965 # code XENIX variable name terminfo name name clashes?
24966 # ---- ------------------- ------------- -----------------------
24968 # CR key_char_right
24969 # CW key_change_window create_window
24971 # HM key_home khome
24973 # LD key_delete_line kdl1
24974 # LF key_linefeed label_off
24975 # NU key_next_unlocked_cell
24976 # PD key_page_down knp
24978 # PN start_print mc5
24980 # PS stop_print mc4
24981 # PU key_page_up kpp pulse
24982 # RC key_recalc remove_clock
24983 # RF key_toggle_ref req_for_input
24984 # RT key_return kent
24985 # UP key_up_arrow kcuu1 parm_up_cursor
24987 # WR key_word_right
24989 # The XENIX extensions also include the following character-set and highlight
24992 # XENIX terminfo function
24993 # ----- -------- ------------------------------
24994 # GS smacs start alternate character set
24995 # GE rmacs end alternate character set
24996 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
24997 # bo blink begin blink (not used in /etc/termcap)
24998 # be end blink (not used in /etc/termcap)
24999 # bb blink glitch (not used in /etc/termcap)
25000 # it dim begin dim (not used in /etc/termcap)
25001 # ie end dim (not used in /etc/termcap)
25002 # ig dim glitch (not used in /etc/termcap)
25004 # Finally, XENIX also used the following forms-drawing capabilities:
25006 # single double type ASCII approximation
25007 # ------ ------ ------------- -------------------
25008 # GV Gv vertical line |
25009 # GH Gv horizontal line - _
25010 # G1 G5 top right corner _ |
25011 # G2 G6 top left corner |
25012 # G3 G7 bottom left corner |_
25013 # G4 G8 bottom right corner _|
25014 # GD Gd down-tick character T
25015 # GL Gl left-tick character -|
25016 # GR Gr right-tick character |-
25017 # GC Gc middle intersection -|-
25018 # GU Gu up-tick character _|_
25020 # These were invented to take advantage of the IBM PC ROM character set. One
25021 # can compose an acsc string from the single-width characters as follows
25022 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
25023 # When translating a termcap file, ncurses tic will do this automatically.
25024 # The double forms characters don't fit the SVr4 terminfo model.
25026 #### AT&T Extensions:
25028 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
25029 # nonstandard capabilities. Its signature is the KM capability, used to name
25030 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
25031 # set. Comments in the original, and a little cross-checking with other AT&T
25032 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
25033 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
25034 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
25035 # cursor invisible), and CV=:ve: (make cursor normal).
25039 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
25040 # have the System V capabilities up to SVr1 level. After that, it supports
25041 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
25042 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
25043 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
25044 # HP binary format incompatible with SVr4's.
25046 #### IBM Extensions
25048 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
25049 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
25050 # capabilities following prtr_non with the following special capabilities:
25051 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
25052 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
25053 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
25054 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
25055 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
25056 # renamed (to kcbt and kslt). The places in the box[12] capabilities
25057 # correspond to acsc chars, here is the mapping:
25059 # box1[0] = ACS_ULCORNER
25060 # box1[1] = ACS_HLINE
25061 # box1[2] = ACS_URCORNER
25062 # box1[3] = ACS_VLINE
25063 # box1[4] = ACS_LRCORNER
25064 # box1[5] = ACS_LLCORNER
25065 # box1[6] = ACS_TTEE
25066 # box1[7] = ACS_RTEE
25067 # box1[8] = ACS_BTEE
25068 # box1[9] = ACS_LTEE
25069 # box1[10] = ACS_PLUS
25071 # The box2 characters are the double-line versions of these forms graphics.
25072 # The AIX binary terminfo format is incompatible with SVr4's.
25074 #### Iris console extensions:
25076 # HS is half-intensity start; HE is half-intensity end
25077 # CT is color terminal type (for Curses & rogue)
25078 # CP is color change escape sequence
25079 # CZ are color names (for Curses & rogue)
25081 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
25083 #### TC Extensions:
25085 # There is a set of extended termcaps associated with something
25086 # called the "Terminal Control" or TC package created by MainStream Systems,
25087 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
25088 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
25089 # that flags color terminals.
25091 ######## NCURSES USER-DEFINABLE CAPABILITIES
25093 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
25094 # infocmp to manipulate user-definable capabilities. Those that are intended
25095 # for use in either terminfo or termcap use 2-character names. Extended
25096 # function keys do not use 2-character names, and are available only with
25099 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
25100 # tic/infocmp, and uses this database (with a few changes). There are a few
25101 # differences, noted in
25102 # https://invisible-island.net/ncurses/ncurses-netbsd.html
25104 # ncurses makes explicit checks for a few user-definable capabilities: AX, E3,
25105 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
25107 #### SCREEN Extensions:
25109 # The screen program uses the termcap interface. It recognizes a few useful
25110 # nonstandard capabilities. Those are used in this file.
25112 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
25114 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
25115 # E0 (str) Switch charset 'G0' back to standard charset.
25116 # S0 (str) Switch charset 'G0' to the specified charset.
25117 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
25120 # AX is relatively straightforward; it is interpreted by ncurses to say that
25121 # SGR 39/49 reset the terminal's foreground and background colors to their
25124 # XT is harder, since screen's manpage does not give more details. For that,
25125 # we must read screen's source-code. For example, when XT is set, screen
25128 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
25129 # screen may also set the terminal's name, which is (for xterm) distinct
25130 # from the icon name.
25131 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
25132 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
25133 # this is an rxvt feature.
25134 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
25135 # These are from xterm, although xterm accepts mouse codes that may not be
25136 # recognized by screen, e.g., 1005, 1006.
25137 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
25138 # sequence. However, because screen uses only termcap, the values returned
25139 # by Af/Ab are not usable because they rely on expressions that termcap
25140 # does not support. Therefore, screen uses a hardcoded string to work
25141 # around the limitation. In a few cases, screen also uses tparm, which
25142 # is a terminfo function rather than termcap.
25143 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
25144 # g) screen also uses the feature to decide whether to pay attention to other
25145 # xterm-related features which are unrelated to the description in the
25148 # Since XT is useful only when the outer terminal matches screen's assumptions,
25149 # it is appropriate to use it in the derived terminal descriptions such as
25150 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
25152 # The other ISO-2022 features are rarely used, but provided here to make
25153 # screen's termcap features available.
25155 #### XTERM Extensions:
25157 # For a discussion of "xterm", "xterm-256color" as values for TERM, see
25158 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_generic
25159 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_256color
25161 # For xterm control sequences, see
25162 # https://invisible-island.net/xterm/ctlseqs/ctlseqs.html
25164 # For function-keys with modifiers, see
25165 # https://invisible-island.net/ncurses/ncurses.faq.html#modified_keys
25167 # For a discussion of "bracketed paste", see
25168 # https://invisible-island.net/xterm/xterm-paste64.html
25170 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
25171 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
25172 # additional function-key strings. Some other developers copied the feature,
25173 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
25174 # these key definitions less ambiguous.
25176 # A few terminals provide similar functionality (sending distinct keys when
25177 # a modifier is used), including rxvt.
25179 # These are the extended keys defined in this file:
25181 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
25182 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
25183 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
25184 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 kxIN kxOUT ka2 kb1
25187 # Bracketed paste is described with these capabilities in vim:
25189 # BE enables bracketed paste
25190 # BD disables bracketed paste
25191 # PS is sent before the pasted text
25192 # PE is sent after the pasted text
25194 # vim also uses these names for xterm focus:
25196 # fe enables focus events
25197 # fd disables focus events
25199 # Here are the other xterm-related extensions which are used in this file:
25201 # Cr is a string capability which resets the cursor color
25202 # Cs is a string capability which sets the cursor color to a given value.
25203 # The single string parameter is the color name/number, according to the
25205 # Ms modifies the selection/clipboard. Its parameters are
25206 # p1 = the storage unit (clipboard, selection or cut buffer)
25207 # p2 = the base64-encoded clipboard content.
25208 # RV requests the terminal to report secondary device attributes (i.e, version).
25209 # rv shows the format of the terminal responses, as a regular expression.
25210 # Se resets the cursor style to the terminal power-on default.
25211 # Ss is a string capability with one numeric parameter. It is used to set the
25212 # cursor style as described by the DECSCUSR function to a block or
25214 # TS is a string capability which acts like "tsl", but uses no parameter and
25215 # goes to the first column of the "status line".
25216 # XF is set/true for terminals which support the xterm focus-in/focus-out
25217 # escape sequences sent from the terminal to the host when private mode
25218 # 1004 is set. Those are defined as kxIN and kxOUT, to take advantage of
25219 # ncurses keypad mode to interpret them like a function key. Because the
25220 # 1004 mode is usually combined with other flags to set the mouse protocol,
25221 # this flag provides an application with the information that the focus
25222 # mode is assumed to be set, e.g., in XM.
25223 # XM is a string capability which overrides ncurses's built-in string which
25224 # enables/disables xterm mouse mode.
25225 # xm shows the format of the mouse responses. Parameters:
25229 # p4 = state, e.g., pressed or released
25230 # p5 = y-ordinate starting region
25231 # p6 = x-ordinate starting region
25232 # p7 = y-ordinate ending region
25233 # p8 = x-ordinate ending region
25234 # Other extensions, used in xm:
25236 # XR requests the terminal to report its version as a free-format string.
25237 # xr shows the format of the terminal responses, as a regular expression.
25239 #### Miscellaneous extensions:
25241 # csr clears the status line
25242 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
25243 # This was implemented for the Hurd.
25244 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
25245 # experimental feature of tmux.
25246 # CO gives the number of indexed ("ANSI") colors which overlay an RGB color
25248 # E3 clears the terminal's scrollback buffer. This was implemented in the
25249 # Linux 3.0 kernel as a security feature. It matches a feature which was
25250 # added in xterm patch #107.
25251 # NQ denotes a terminal which does not support the standard query/response used
25252 # in u6/u7 (cursor position) and u8/u9 (device attributes).
25253 # U8 is a numeric capability which denotes a terminal emulator which does not
25254 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
25255 # value to enable it.
25256 # Smulx modifies the appearance of underlines in VTE, December 2017.
25258 ######## CHANGE HISTORY
25260 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
25261 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
25262 # maintained by Eric S. Raymond as part of the ncurses project.
25264 # This file contains all the capability information present in John Kunze's
25265 # last version of the termcap master file, except as noted in the change
25266 # comments at end of file. Some information about very ancient obsolete
25267 # capabilities has been moved to comments. Some all-numeric names of older
25268 # terminals have been retired.
25270 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
25271 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
25272 # used by BSD curses.
25274 # The 9.1.0 version of this file was translated from my lightly-edited copy of
25275 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
25276 # the purpose. Unless the ncurses tic implementation and the Lisp code were
25277 # making perfectly synchronized mistakes which I then failed to catch by
25278 # eyeball, the translation was correct and perfectly information-preserving.
25280 # Major version number bumps correspond to major version changes in ncurses.
25282 # Here is a log of the changes since then:
25284 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
25285 # * First terminfo master translated from 8.3.
25286 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
25287 # * Replaced Wyse entries with updated entries supplied by vendor.
25289 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
25290 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
25291 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
25292 # * Better XENIX keycap translation. Describe TC termcaps.
25293 # * Contact and history info supplied by Qume.
25294 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
25295 # * Raided the Shuford FTP site for recent termcaps/terminfos.
25296 # * Added information on X3.64 and VT100 standard escape sequences.
25297 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
25298 # * Added a correct X11R6 xterm entry.
25299 # * Fixed terminfo translations of padding.
25300 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
25301 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
25302 # * Added u6/u7/u8/u9 capabilities.
25303 # * Added PCVT entry.
25304 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
25305 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
25306 # to use reverse-video standout so Emacs will look right.
25307 # * Added el1 capability to ansi.
25308 # * Added smacs/rmacs to ansi.sys.
25310 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
25311 # * New mt70 entry.
25312 # * Added COPYRIGHTS AND OTHER DELUSIONS.
25313 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
25314 # smartvid & smarterm, ampex 175 & 219 & 232,
25315 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
25316 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
25317 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
25318 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
25319 # * Replaced the Perkin-Elmer entries with vendor's official ones.
25320 # * Restored the old minimal-ansi entry, luna needs it.
25321 # * Fixed some incorrect ip and proportional-padding translations.
25322 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
25323 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
25324 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
25325 # to force a particular height.
25326 # * Added beehive4 and reorganized other Harris entries.
25327 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
25328 # * Merged in DEC's official entries for its terminals. The only old
25329 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
25330 # * Replaced the translated BBN BitGraph entries with purpose-built
25331 # ones from AT&T's SVr3.
25332 # * Replaced the AT&T entries with AT&T's official terminfos.
25333 # * Added Teleray 16, vc415, cops10.
25334 # * Merged in many individual capabilities from SCO terminfo files.
25335 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
25337 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
25338 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
25339 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
25340 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
25341 # simterm, citoh and variants.
25342 # * Replaced sol entry with sol1 and sol2.
25343 # * Replaced Qume QVT and Freedom-series entries with purpose-built
25344 # terminfo entries.
25345 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
25346 # and dg200 entries using caps from SCO.
25347 # * Added the usual set of function-key mappings to ANSI entry.
25348 # * Corrected xterm's function-key capabilities.
25349 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
25350 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
25351 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
25352 # * Fix in xterm entry, get the arrow keys right.
25353 # * Change some \0 escapes to \200.
25354 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
25355 # * Added apple (Videx card), adm1a, oadm31.
25356 # * Fixed malformed ampex csr.
25357 # * Fixed act4, cyb110; they had old-style prefix padding left in.
25358 # * Changed mandatory to advisory padding in many entries.
25359 # * Replaced HP entries up to hpsub with purpose-built ones.
25360 # * Blank rmir/smir/rmdc/smdc capabilities removed.
25361 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
25362 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
25363 # * Replaced the Ann Arbor entries with SCO's, the init strings are
25364 # more efficient (but the entries otherwise identical).
25365 # * Added dg211 from Shuford archive.
25366 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
25367 # adm42-nl, pc52, gs6300, xerox820, uts30.
25368 # * Pull SCO's padding into vi200 entry.
25369 # * Improved capabilities for tvi4107 and other TeleVideo and Viewpoint
25370 # entries merged in from SCO's descriptions.
25371 # * Fixed old-style prefix padding on zen50, h1500.
25372 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
25373 # entry from SCO's description.
25374 # * Reorganized the special entries.
25375 # * Added lm#0 to cbunix and virtual entries.
25377 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
25378 # * Restored cdc456tst.
25379 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
25380 # * Added megatek, beacon, microkit.
25381 # * Freeze for ncurses-1.9 release.
25382 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
25383 # * Added historical data for TAB.
25384 # * Comment fixes from David MacKenzie.
25385 # * Added the new BSDI pc3 entry.
25386 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
25387 # * A change in the tic -C logic now ensures that all entries in
25388 # the termcap translation will fit in < 1024 bytes.
25389 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
25390 # from GNU termcap file. This merges in all their local information.
25391 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
25392 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
25393 # * Added warnings about entries with long translations (restoring
25394 # all the GNU termcaps pushes a few over the edge).
25395 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
25396 # * Yet another tic change, and a couple of entry tweaks, to reduce the
25397 # number of long (> 1024) termcap translations back to 0.
25399 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
25400 # * Added kf13-kf20 to Linux entry.
25401 # * Regularize Prime terminal names.
25402 # * Historical data on Synertek.
25403 # * Freeze for ncurses-1.9.1.
25404 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
25405 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
25406 # * Eliminate whitespace in short name fields, this tanks some scripts.
25407 # * Name field changes to shorten some long entries.
25408 # * Termcap translation now automatically generates empty rmir/smir
25409 # when ich1/ich is present (copes with an ancient vi bug).
25410 # * Added `screen' entries from FSF's screen-3.6.2.
25411 # * Added linux-nic and xterm-nic entries.
25412 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
25413 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
25414 # eliminating some special-case code in ncurses.
25416 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
25417 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
25418 # that captures everything unique from it.
25419 # * Added reorder script generator.
25420 # * Freeze for ncurses 1.9.2 release.
25421 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
25422 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
25423 # * Added Olaf Siebert's corrections for adm12.
25424 # * ansi-pc-color now includes the colors and pairs caps, so that
25425 # entries which use it will inherit them automatically.
25426 # * The linux entry can now recognize the center (keypad 5) key.
25427 # * Removed some junk that found its way into Linux acsc.
25429 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
25430 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
25431 # * xterm doesn't try to use application keypad mode any more.
25432 # * Freeze for ncurses-1.9.3 release.
25433 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
25434 # * Added corrected sun entry from vendor.
25435 # * Added csr capability to linux entry.
25436 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
25437 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
25438 # * Some commented-out caps in long entries come back in, my code
25439 # for computing string-table lengths had a bug in it.
25440 # * pcansi series modified to fit comm-program reality better.
25441 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
25442 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
25443 # * Correct some bad aliases in the pcansi series
25444 # * Added entry for QNX console.
25445 # * Clean up duplicate long names for use with 4.4 library.
25446 # * Change vt100 standout to be normal reverse vide, not bright reverse;
25447 # this makes the Emacs status line look better.
25448 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
25449 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
25450 # * Minor surgery, mostly on name strings, to shorten termcap version.
25452 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
25453 # * Added dec-vt100 for use with the EWAN emulator.
25454 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
25455 # * Freeze for 1.9.5 alpha release.
25456 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
25457 # * Changed xterm lines to 24, the X11R6 default.
25458 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
25459 # * Added 7 newly discovered, undocumented acsc characters to linux
25460 # entry (the pryz{|} characters).
25461 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
25462 # * Correct two typos in the xterm entries introduced in 9.9.1.
25463 # * I finally figured out how to translate ko capabilities. Done.
25464 # * Added tvi921 entries from Tim Theisen.
25465 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
25466 # * Removed mystery tec entry, it was neither interesting nor useful.
25467 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
25468 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
25469 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
25470 # by making them relative to use capabilities
25471 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
25472 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
25473 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
25475 # * Translate all home=\E[;H capabilities to home=\E[H, they're
25477 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
25478 # vt100 and ANSI-like terminals.
25479 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
25480 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
25481 # does this now, too.
25482 # * fviewpoint is gone, it duplicated screwpoint.
25483 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
25484 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
25485 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
25486 # The UW vi50 replaces the old one, which becomes vi50adm,
25487 # * No more embedded commas in name fields.
25489 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
25490 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
25491 # * Introduced klone+* entries for describing Intel-console behavior.
25492 # * Linux kbs is default-mapped to delete for some brain-dead reason.
25493 # * -nsl -> -ns. The -pp syntax is obsolete.
25494 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
25495 # * Make xterm entry do application-keypad mode again. I got complaints
25496 # that it was messing up someone's 3270 emulator.
25497 # * Added some longname fields in order to avoid warning messages from
25498 # older tic implementations.
25499 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
25500 # it! (This gives us pi, greater than, less than, and a few more.)
25501 # * Freeze for ncurses-1.9.6 release.
25502 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
25503 # * Add xon to a number of console entries, they're memory-mapped and
25504 # don't need padding.
25505 # * Correct the use dependencies in the ansi series.
25506 # * Hand-translate more XENIX capabilities.
25507 # * Added hpterm entry for HP's X terminal emulator.
25508 # * Added aixterm entries.
25509 # * Shortened four names so everything fits in 14 chars.
25511 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
25512 # * Added ibcs2 entry and info on iBCS2 standard.
25513 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
25514 # * We can handle the HP meml/memu capability now.
25515 # * Added smacs to klone entries, just as documentation.
25516 # * Corrected ansi.sys and cit-500 entries.
25517 # * Added z39, vt320-k311, v220c, and avatar entries.
25518 # * Make pcansi use the ansi.sys invis capability.
25519 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
25520 # tvi925, tvi950, dt80, ncr7900i, h19.
25521 # * X3.64 has been withdrawn, change some references.
25522 # * Removed function keys from ansi-m entry.
25523 # * Corrected ansi.sys entry.
25524 # * Freeze for ncurses-1.9.7 release.
25525 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
25526 # * Added rmam/smam capabilities to many entries based on init strings.
25527 # * Added correct hpa/vpa to linux.
25528 # * Reduced several entries relative to vt52.
25529 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
25530 # * Exiled some utterly unidentifiable custom and homebrew types to the
25531 # UFO file; also, obsolete small-screen hardware; also, entries which
25532 # look flat-out incorrect, garbled, or redundant. These include the
25533 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
25534 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
25535 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
25536 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
25537 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
25538 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
25539 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
25540 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
25541 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
25542 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
25543 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
25544 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
25545 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
25546 # * Corrected pcvt25h as suggested by Brian C. Grayson
25547 # <bgrayson@pine.ece.utexas.edu>.
25548 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
25549 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
25550 # * Added kent=\EOM to xterm entry.
25552 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
25553 # * Corrected gigi entry.
25554 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
25555 # bad hpa/vpa capabilities.
25556 # * Corrected flash strings to have a uniform delay of .2 sec. No
25557 # more speed-dependent NUL-padding!
25558 # * terminfo capabilities in comments bracketed with <>.
25559 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
25560 # * Replaced pcvt with the 3.31 pcvt entries.
25561 # * Freeze for 1.9.7a.
25562 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
25563 # * Added emu entry from the X11R6 contrib tape sources.
25565 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
25566 # * Improved iris-ansi and sun entries.
25567 # * More flash string improvements.
25568 # * Corrected wy160 & wy160 as suggested by Robert Dunn
25569 # * Added dim to at386.
25570 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
25571 # he's ready to start using the termcap generated from this one.
25572 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
25573 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
25574 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
25575 # att610, att620, att630,
25576 # * Changed hazeltine name prefix from h to hz.
25577 # * Sent t500 to the UFI file.
25578 # * I think we've sucked all the juice out of BSDI's termcap file now.
25579 # * Freeze for ncurses 1.9.8 release
25580 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
25581 # * Unfreeze, linux kbs needed to be fixed.
25582 # * Tim Theisen pinned down a bug in the DMD firmware.
25583 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
25584 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
25585 # (The broken ones had been shadowed by sgr.)
25586 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
25587 # * Added documentation on ECMA-48 standard.
25588 # * New Amiga entry.
25589 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
25590 # * More ECMA-48 stuff
25591 # * Corrected typo in minix entry, added pc-minix.
25592 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
25593 # * Added rxvt entry.
25594 # * Added 1.3.x color-change capabilities to linux entry.
25595 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
25596 # * Corrected rxvt entry khome/kend.
25597 # * Corrected linux color change capabilities.
25598 # * NeXT entries from Dave Wetzel.
25599 # * Cleaned up if and rf file names (all in /usr/share now).
25600 # * Changed linux op capability to avoid screwing up a background color
25601 # pair set by setterm.
25602 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
25603 # * Added xterm-sun.
25604 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
25607 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
25608 # * Another sweep through the Shuford archive looking for new info.
25609 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
25610 # * Added st52 from Per Persson.
25611 # * Added eterm from the GNU Emacs 19.30 distribution.
25612 # * Freeze for 1.9.9.
25613 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
25614 # * FreeBSD console entries from Andrew Chernov.
25615 # * Removed duplicate Atari st52 name.
25616 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
25617 # * xterm doesn't actually have ACS_BLOCK.
25618 # * Change klone+color setf/setb to simpler forms that can be
25619 # translated into termcap.
25621 # * Removed mechanically-generated junk capabilities from cons* entries.
25622 # * Added color support to bsdos.
25623 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
25624 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
25625 # * Created ecma+color, linux can use it. Also added ech to linux.
25626 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
25627 # * Add descriptions to FreeBSD console entries. Also shorten
25628 # some aliases to <= 14 chars for portability.
25629 # * Added x68k console
25630 # * Added OTbs to several VT-series entries.
25631 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
25632 # * screen entry update for 3.7.1 from Michael Alan Dorman.
25633 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
25634 # * kterm correction due to Kenji Rikitake.
25635 # * ACS correction in vt320-kll due to Phillippe De Muyter.
25636 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
25637 # * Sun console entry correction from J.T. Conklin.
25638 # * Changed all DEC VT300 and up terminals to use VT300 tab set
25639 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
25640 # * Added smul to linux entry (we never noticed it was missing
25641 # because of sgr!).
25642 # * Added rmln to hp+labels (deduced from other HP entries).
25643 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
25644 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
25645 # * Corrected vt220 acsc.
25646 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
25647 # this corresponds to reality and helps prevent some tic warnings.
25648 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
25649 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
25650 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
25651 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
25652 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
25653 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
25654 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
25655 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
25656 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
25657 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
25658 # ifmr, v3220, wy100q, tandem653, ibmaed.
25659 # * Added DWK terminal description.
25660 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
25661 # * Many entries now have highlights inherited from adm+sgr.
25662 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
25663 # * xtitle and xtitle-twm enable access to the X status line.
25664 # * Added linux-1.3.6 color palette caps in conventional format.
25665 # * Added adm1178 terminal.
25666 # * Move fos and apollo terminals to obsolete category.
25667 # * Aha! The BRL terminals file told us what the Iris extensions mean.
25668 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
25669 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
25671 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
25672 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
25673 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
25674 # * Corrected, from BRL termcap file: vi50.
25675 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
25676 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
25677 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
25678 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
25679 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
25680 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
25681 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
25682 # * Paired-attribute fixes to various terminals.
25683 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
25684 # * xterm entry corrections from Thomas Dickey.
25685 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
25686 # * Added t916 entry, translated from a termcap in SCO's support area.
25687 # * New qnx entry from Michael Hunter.
25688 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
25689 # * Added hpex2 from Ville Sulko.
25690 # * Fixed a bug that ran the qnx and pcvtXX together.
25691 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
25692 # * Added dtterm entry from Solaris CDE.
25693 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
25694 # * corrected pairs#8 typo in dtterm entry.
25696 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
25697 # * updated xterm entry to cover 3.1.2E's new features.
25698 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
25699 # * Added new minix entry
25700 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
25701 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
25702 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
25703 # * Added Prism entries and kt7ix.
25704 # * Caution notes about EWAN and tabset files.
25705 # * Changed /usr/lib/tabset -> /usr/share/tabset.
25706 # * Added acsc/rmacs/smacs to vt52.
25707 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
25708 # * Merged in Thomas Dickey's reorganization of the xterm entries;
25709 # added technical corrections to avoid warning messages.
25710 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
25711 # * Added rmso=\E[27m in Linux entry.
25712 # * Added koi8-r support for Linux console.
25713 # * Replace xterm entries with canonical ones from XFree86 3.2.
25714 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
25715 # * Added color_xterm from Jacob Mandelson
25716 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
25717 # * Back off the xterm entry to use r6 as a base.
25718 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
25719 # * Added dec-vt220 at Adrian Garside's request.
25721 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
25723 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
25724 # * Minor corrections to xterm entries.
25725 # * Replaced EWAN telnet entry.
25726 # * Dropped the reorder script generator. It was a fossil.
25727 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25728 # * Replaced minitel-2 entry.
25729 # * Added MGR, ansi-nt.
25730 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25731 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25732 # the 4.4BSD Lite2 file.
25734 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
25735 # * Use setaf/setab consistently with SVr4.
25736 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
25737 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
25738 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
25739 # * add xterm-16color, for XFree86 3.3
25740 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
25741 # * correct typo in emu
25742 # * correct typo in vt102-w (Robert Wuest)
25743 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
25744 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
25745 # * remove ech capability from rxvt (it does the wrong thing)
25746 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
25747 # * remove spurious newlines from several entries (hp+color, wy50,
25748 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
25750 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
25751 # * correct rmso capability of wy50-mc
25752 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
25753 # * add cbt to xterm-xf86-v32
25754 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
25755 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
25756 # other capabilities not in xterm-r6.
25757 # * remove alternate character set from kterm entry.
25758 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
25759 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
25760 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
25761 # * add xterm-8bit entry.
25762 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
25763 # * repair several places where early version of tic replaced \, with \\\,
25764 # * make acsc entries canonical form (sorted, uniq).
25765 # * modify acsc entries for linux, linux-koi8
25766 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
25767 # * add color, mouse support to kterm.
25768 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
25769 # * correct wy120 smxon/tbc capabilities which were stuck together.
25770 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
25771 # * add entry for xterm-xf86-v39t
25772 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
25773 # * add u8,u9 to sun-il description
25774 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
25775 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
25777 # * add hds200 description (Walter Skorski)
25778 # * add EMX 0.9b descriptions
25779 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
25780 # * rename xhpterm back to hpterm.
25781 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
25782 # * change initc in linux-c-nc to use 0..1000 range.
25783 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
25784 # * remove hpa/vpa from rxvt, which implements them incorrectly.
25785 # * add sgr0 for rxvt.
25786 # * remove bogus smacs/rmacs from EMX descriptions.
25787 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
25788 # * revised entry for att7300
25789 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
25790 # * use \0 rather than \200.
25791 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
25792 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
25793 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
25794 # * rename xterm-xf86-v39t to xterm-xf86-v40
25795 # * remove bold/underline from sun console entries since they're not
25797 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
25798 # * add beterm entry (Fred Fish)
25799 # * add irix-color/xwsh entry.
25800 # * turn ncv off for linux.
25801 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
25802 # * set ncv for FreeBSD console (treat colors with reverse specially).
25803 # * remove sgr string from qnx based on report by Xiaodan Tang
25804 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
25805 # * remove spurious commas from descriptions
25806 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
25807 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
25808 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25809 # apparently based on cp-866).
25811 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
25813 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25814 # * Replaced minitel-2 entry.
25815 # * Added MGR, ansi-nt.
25816 # * Minor corrections to xterm entries.
25817 # * Replaced EWAN telnet entry.
25818 # * Dropped the reorder script generator. It was a fossil.
25819 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25820 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25821 # the 4.4BSD Lite2 file.
25822 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
25823 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
25824 # * Updated iris-ansi; corrected vt102-w.
25825 # * Switch base xterm entry to 3.3 level.
25826 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
25828 # * Removed rmir/smir from tv92B.
25830 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
25831 # * add hds200 description (Walter Skorski)
25832 # * add beterm entry (Fred Fish)
25833 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
25834 # iris-color entries.
25835 # * add emx entries.
25836 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
25837 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
25839 # * remove sgr string from qnx based on report by Xiaodan Tang
25840 # * Added u8/u9, removed rmul/smul from sun-il.
25841 # * 4.2 tic displays \0 rather than \200.
25842 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25843 # apparently based on cp-866).
25844 # * Merged in Pavel Roskin's acsc for linux-koi8
25845 # * Corrected some erroneous \\'s to \.
25846 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
25847 # * II -> ii in pcvtXX, screen, xterm.
25848 # * Removed \n chars following ANSI escapes in sgr & friends.
25849 # * Updated Wyse entries.
25850 # * h19 corrections from Tim Pierce.
25851 # * Noted that the dm2500 has both ich and smir.
25852 # * added pccons for the Alpha under OSF/1.
25853 # * Added Sony NEWS workstation entries and cit101e-rv.
25854 # * Reverted `amiga'; to Kent Polk's version, as I'm told
25855 # the Verkuil entry messes up with Amiga Telnet.
25856 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
25857 # * Corrected attributions in 10.2.0 release notes.
25858 # * Scanned the Shuford archive for new terminfos and information.
25859 # * Removed sgr from qnx entry (Thomas Dickey).
25860 # * Added entries for ICL and Kokusai Data Systems terminals.
25861 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
25862 # * Incorporated att700 from the Boundless Technology FTP site.
25863 # * Miscellaneous contact-address and Web-page updates.
25865 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
25868 # * add nxterm and xterm-color terminfo description (request by Cristian
25869 # Gafton <gafton@redhat.com>).
25870 # * modify rxvt terminfo description to clear alternate screen before
25871 # switching back to normal screen, for compatibility with applications
25872 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
25873 # * modify linux terminfo description to reset color palette (reported
25874 # by Telford Tendys <telford@eng.uts.edu.au>).
25877 # * merge changes from current XFree86 xterm terminfo descriptions.
25880 # * Added minitel1 entries from Alexander Montaron.
25881 # * Added qnxt2 from Federico Bianchi.
25882 # * Added arm100 terminfo entries from Dave Millen.
25885 # * Added ncsa telnet entries from Francesco Potorti
25888 # * modify ncsa telnet entry to reflect color, other capabilities based on
25889 # examination of the source code - T.Dickey.
25892 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
25895 # * Added Francesco Potorti's tuned Wyse 99 entries.
25896 # * dtterm enacs correction from Alexander V. Lukyanov.
25897 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
25898 # * correct a typo in icl6404 entry.
25899 # * add xtermm and xtermc
25902 # * format most %'char' sequences to %{number}
25903 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
25904 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
25907 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
25908 # * correct initialization string in xterm-r5, add misc other features
25909 # to correspond with xterm patch #84 - TD
25912 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
25913 # * add Mathew Vernon's mach console entries
25914 # * corrections for ncsa function-keys (report by Larry Virden)
25917 # * change linux to use ncv#2, since underline does not work with color - TD
25920 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
25921 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
25922 # application modes, change kent to use the correct keypad code - TD
25925 # * add entry for Tera Term - TD
25928 # * minor improvements for teraterm entry - TD
25929 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
25930 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
25933 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
25934 # xterm and ncsa entries by removing the unneeded ones. Note that
25935 # some entries will return kend & khome versus kslt and kfnd, for
25936 # PC-style keyboards versus strict vt220 compatibility - TD
25939 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
25941 # * add 'crt' entry - TD
25942 # * correct typos in 'linux-c' entry - TD
25945 # * update entries for BSD/OS console to use klone+sgr and klone+color
25946 # (Jeffrey C Honig)
25949 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
25952 # * add linux-lat, from RedHat patches to ncurses 4.2
25955 # * add complete set of default function-key definitions for scoansi - TD.
25958 # * add cnorm, cvvis for Linux 2.2 kernels
25961 # * add kmous to xterm-r5 -TD
25962 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
25963 # parent "use" clause -TD
25966 # * corrected cnorm, added el1 in 'screen' description -TD
25969 # * add ms-vt100 -TD
25972 # * corrections to beterm entry -TD
25975 # * add cygwin entry -TD
25978 # * minor corrections for beterm entry -TD
25981 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
25984 # * add amiga-8bit entry
25985 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
25986 # rcons-color, based on
25987 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
25988 # * add alias for iris-ansi-net
25991 # * corrected scoansi entry's acsc, some function keys, add color -TD
25994 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
25995 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
25996 # key mapping, leaving Potorti's entries more like he named them -TD
25997 # * remove enter/exit am-mode from cygwin -TD
26000 # * correct typos in several entries (missing '[' from CSI):
26001 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
26002 # strings for avt-ns -TD
26003 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
26006 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
26007 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
26008 # * add xterm-88color and xterm-256color -TD
26011 # * add "obsolete" termcap strings -TD
26012 # * add kvt and gnome entries -TD
26015 # * correct cup string for regent100 -TD
26018 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
26019 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
26020 # * change OTrs capabilities to rs2 -TD
26021 # * add obsolete and extended capabilities to 'screen' -TD
26024 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
26026 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
26027 # and adding kcbt -TD
26030 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
26031 # nonstandard resource settings -TD
26034 # * minor fixes for xterm-*, based on Debian #58530 -TD
26037 # * add several terminal types from esr's "11.0", as well as comments.
26038 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
26039 # vt220-8bit, vt220-old, wy85-8bit
26042 # * add several terminal types from esr's "11.0.1" (ansi-*).
26043 # * update OTxx capabilities for changes on 2000/3/4.
26044 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
26047 # * move screen's AX extension to ecma+color, modify several entries to
26048 # use that, adjusting ncv as needed -TD
26051 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
26052 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
26053 # in esr's version.
26056 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
26057 # * correct color definition for ibm3164, make minor changes to other
26058 # IBM terminal definitions based on recent terminfo descriptions -TD
26061 # * add mgterm, from NetBSD -TD
26062 # * add alias sun-cgsix for sun-ss5 as per NetBSD
26063 # * change cons25w to use rs2 for reset rather than rs1 -TD
26064 # * add rc/sc to aixterm based on manpage -TD
26067 # * remove ncv from xterm-16color, xterm-256color
26070 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
26073 # * add Eterm (Michael Jennings)
26076 # * add amiga-vnc entry.
26079 # * correct description of Top Gun Telnet.
26080 # * add kterm-color
26083 # * add qansi* entries from QNX ftp site.
26086 # * add Matrix Orbital entries by Eric Z. Ayers).
26087 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
26091 # * add S0, E0 extensions to screen's entry -TD
26094 # * several corrections based on tic's new parameter-checking code -TD
26095 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
26096 # bracketing sequences that reset video attributes (\E8 would restore
26100 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
26103 # * improved scoansi, based on SCO man-page, and testing console,
26104 # scoterm with tack -TD
26107 # * modify kterm to use acsc via SCS controls.
26110 # * screen 3.9.8 allows xterm mouse controls to pass-through
26113 # * remove spurious "%|" from some xterm entries.
26116 # * modify 'screen' khome/kend to match screen 3.09.08
26117 # * add examples of 'screen' customization (screen.xterm-xfree86,
26118 # screen.xterm-r6, screen.teraterm) -TD
26121 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
26122 # * add "Apple_Terminal" entries -Benjamin Sittler
26123 # * remove time-delays from "Apple_Terminal" entries -TD
26124 # * make sgr entries time-delays consistent with individual caps -TD
26127 # * corrected/updated screen.xterm-xfree86
26130 # * ELKS descriptions, from Federico Bianchi
26131 # * add u6 (CSR) to Eterm (Michael Jennings).
26134 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
26135 # tic which handles names no longer than 14 characters. Add
26136 # corresponding descriptions for the Darwin PowerPC console named
26137 # "xnuppc" -Benjamin Sittler
26140 # * change kbs in mach entries to ^? (Marcus Brinkmann).
26143 # * add "putty" entry -TD
26144 # * updated "Apple_Terminal" entries -Benjamin Sittler
26147 # * add ms-vt100-color entry -TD
26148 # * add "konsole" entries -TD
26151 # * update gnome entry to Redhat 7.2 -TD
26154 # * add kf13-kf48 strings to cons25w -TD
26155 # * add pcvt25-color entry -TD
26156 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
26157 # * improve some features of scoansi entry based on SCO's version -TD
26158 # * add scoansi-new entry corresponding to OpenServer 5.0.6
26161 # * add kcbt to screen entry -TD
26164 # * add rxvt-16color, ibm+16color, mvterm entries -TD
26167 # * split out linux-basic entry, making linux-c inherit from that, and
26168 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
26169 # the history of this console type -TD
26170 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
26171 # r/g/b parameters of initc are in the range 0 to 1000 -TD
26174 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
26177 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
26178 # in the latter -TD
26181 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
26182 # * ncr260wy350pp has only 16 color pairs -TD
26183 # * add sun-type4 from NetBSD -TD
26184 # * update xterm-xfree86 to current (xterm patch #170) -TD
26185 # * add screen-bce, screen-s entries -TD
26186 # * add xterm-1002, xterm-1003 entries -TD
26189 # * update homepage for Top Gun Telnet/SSH
26192 # * reduce duplication in emx entries, added emx-base -TD
26195 # * corrected acs for screen.teraterm -TD
26196 # * add tkterm entry -TD
26199 # * cygwin changes from Charles Wilson:
26200 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
26201 # primary instead of nxterm, to match XFree86's xterm.terminfo
26202 # usage and to prevent circular links.
26203 # (rxvt): add additional codes from rxvt.org.
26204 # (rxvt-color): new alias
26205 # (rxvt-xpm): new alias
26206 # (rxvt-cygwin): like rxvt, but with special acsc codes.
26207 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
26208 # with a "native" MSWin GUI. Each takes different acsc codes,
26209 # which are both different from the "normal" rxvt's acsc.
26210 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
26211 # (cygwinDBG): ditto.
26214 # * update gnome terminal entries -TD
26217 # * add entries for djgpp 2.03 and 2.04 -TD
26220 # * add alias for vtnt -TD
26221 # * update xterm-xfree86 for XFree86 4.4 -TD
26224 # * add linux-vt (Andrey V Lukyanov)
26227 # * add screen.linux -TD
26230 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
26233 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
26234 # * add vt100+ and vt-utf8 entries -TD
26235 # * add uwin entry -TD
26238 # * add sgr strings to several common entries lacking them, e.g.,
26239 # screen, to make the entries more portable -TD
26240 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
26241 # * similar fixups for cvvis/cnorm various entries -TD
26244 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
26248 # * add xterm-xf86-v44 -TD
26249 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
26250 # on G1 being used via an ISO-2022 escape sequence (report by
26251 # Juliusz Chroboczek) -TD
26252 # * add 'hurd' entry -TD
26255 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
26257 # * align with xterm #192's use of xterm-new -TD
26258 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
26259 # * make xterm-new the default "xterm" -TD
26262 # * minor fixes for emu -TD
26264 # * add rmam/smam to linux (Trevor Van Bremen)
26265 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
26266 # * fixes for avatar0 -TD
26267 # * fixes for vp3a+ -TD
26270 # * add xterm-pc-fkeys -TD
26271 # * review/update gnome and gnome-rh90 entries (prompted by
26272 # Redhat Bugzilla #122815) -TD
26273 # * review/update konsole entries -TD
26274 # * add sgr, correct sgr0 for kterm and mlterm -TD
26275 # * correct tsl string in kterm -TD
26278 # * make ncsa-m rmacs/smacs consistent with sgr -TD
26279 # * add sgr, rc/sc and ech to syscons entries -TD
26280 # * add function-keys to decansi -TD
26281 # * add sgr to mterm-ansi -TD
26282 # * add sgr, civis, cnorm to emu -TD
26283 # * correct/simplify cup in addrinfo -TD
26284 # * corrections for gnome and konsole entries
26285 # (Redhat Bugzilla #122815) -Hans de Goede
26286 # * modify DEC entries (vt220, etc), to add sgr string, and to use
26287 # ISO-2022 strings for rmacs/smacs -TD
26290 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
26293 # * improved putty entry -Robert de Bath
26296 # * remove dch/dch1 from rxvt because they are implemented inconsistently
26297 # with the common usage of bce/ech -TD
26298 # * remove khome from vt220 (vt220's have no home key) -TD
26299 # * add rxvt+pcfkeys -TD
26302 # * modify several entries to ensure xterm mouse and cursor visibility
26303 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
26304 # Eterm, screen. (The xterm entries are left alone - old ones for
26305 # compatibility, and the new ones do not require this change) -TD
26308 # * add morphos entry -Pavel Fedin
26309 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
26310 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
26313 # * update wsvt25 entry -TD
26316 # * update pairs for xterm-88color and xterm-256color to reflect the
26317 # ncurses extended-color support -TD
26320 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
26321 # * add aixterm-16color to demonstrate 16-color capability -TD
26324 # * add media-copy to vt100 -TD
26325 # * corrected acsc string for vt52 -TD
26328 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
26330 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
26333 # * re-corrected acsc string for vt52 -TD
26336 # * corrected sun-il sgr string which referred to bold and underline -TD
26337 # * add sun-color entry -TD
26340 # * modify sgr0 in several entries to reset alternate-charset as in the
26342 # * modify sgr string of prism9 to better match the individual
26346 # * correct order of use= in rxvt-basic -TD
26349 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
26352 # * other minor fixes to cygwin based on tack -TD
26353 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
26356 # * add nsterm-16color entry -TD
26357 # * remove ncv flag from xterm-16color -TD
26358 # * remove setf/setb from xterm-256color to match xterm #209 -TD
26359 # * update mlterm entry to 2.9.2 -TD
26362 # * fixes to make nsterm-16color match report
26363 # by Christian Ebert -Alain Bench
26366 # * add xterm+256color building block -TD
26367 # * add gnome-256color, putty-256color, rxvt-256color -TD
26370 # * add hpterm-color -TD
26373 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
26374 # * add gnome-fc5 (prompted by GenToo #122566) -TD
26375 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
26376 # * improve xterm-256color by combining the ibm+16color setaf/setab
26377 # strings with SGR 48. The setf/setb strings also are cancelled here
26378 # rather than omitted so derived entries will cancel those also -Alain
26382 # * add some notes regarding copyright to terminfo.src -TD
26383 # * use rxvt+pcfkeys in Eterm -TD
26384 # * remove km and flash from gnome, Eterm and rxvt since they do not work
26385 # as one would expect (km sends ESC rather than setting the 8th bit
26387 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
26388 # * add konsole-solaris -TD
26391 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
26392 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
26393 # * modify xterm-24 to inherit from "xterm" -TD
26394 # * add xiterm entry -TD
26395 # * add putty-vt100 entry -TD
26396 # * corrected spelling of Michael A Dorman's name, prompted by
26397 # http://www.advogato.org/person/mdorman/diary.html -TD
26400 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
26401 # * update xterm+pcfkeys to match xterm #216 -TD
26404 # * make descriptions of xterm entries consistent with its terminfo -TD
26407 # * add xfce, mgt -TD
26410 # * correct acsc string in kterm -TD
26413 # * add kon entry -TD
26414 # * remove invis from linux and related entries, add klone+sgr8 for those
26415 # that implement the feature (or have not been shown to lack it) -TD
26418 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
26419 # * minor improvements to rxvt+pcfkeys -TD
26422 # * fix a few typos in if/then/else expressions -TD
26425 # * add several GNU Screen variations with 16- and 256-colors, and
26426 # status line (Alain Bench).
26429 # * add Newbury Data entries (Jean-Charles Billaud).
26432 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
26435 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
26436 # * add konsole-256color entry -TD
26439 # * add 9term entry (request by Juhapekka Tolvanen) -TD
26442 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
26443 # * add shift-control- and control-modified keys for rxvt editing
26445 # * update mlterm entry to 2.9.3 -TD
26446 # * add mlterm+pcfkeys -TD
26449 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
26450 # xterm+pcc0, etc., to make the corresponding building blocks reflect
26451 # xterm's capabilities -TD
26452 # * add mrxvt entry -TD
26453 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
26456 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
26459 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
26460 # xterm starting with xterm patch #216 -TD
26461 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
26462 # to match xterm #230 -TD
26463 # * extend xterm+pccX entries to match xterm #230 -TD
26464 # * add xterm+app, xterm+noapp, from xterm #230 -TD
26465 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
26468 # * add screen.rxvt -TD
26471 # * add screen+fkeys (prompted by Debian #478094) -TD
26474 # * add screen.mlterm -TD
26475 # * improve mlterm and mlterm+pcfkeys -TD
26478 # * add Eterm-256color, Eterm-88color -TD
26479 # * add rxvt-88color -TD
26482 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
26483 # original to teraterm2.3 -TD
26484 # * update "gnome" to 2.22.3 -TD
26485 # * update "konsole" to 1.6.6 -TD
26486 # * add "aterm" -TD
26487 # * add "linux2.6.26" -TD
26490 # * change several \E[2g (clear tab at current column) to \E[3g
26491 # (clear all tabs) to match definition for tbc capability -TD
26494 # * add eterm-color -TD
26497 # * add screen.Eterm -TD
26500 # * correct typo in pfkey of ansi.sys-old
26501 # (report by Kalle Olavi Niemitalo)
26502 # * move function- and cursor-keys from emx-base to ansi.sys, and create
26503 # a pfkey capability which handles F1-F48 -TD
26506 # * add vwmterm entry (Bryan Christ)
26509 # * change ncv and op capabilities in sun-color to match Sun's entry for
26510 # this (report by Laszlo Peter)
26511 # * improve interix smso by using reverse rather than bold (report by
26512 # Kristof Zelechovski).
26515 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
26516 # * add linux-16color (Benjamin Sittler)
26517 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
26518 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
26519 # * add ccc and initc capabilities to xterm-16color -TD
26522 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
26525 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
26528 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
26529 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
26532 # * add bterm (bogl 0.1.18) -TD
26533 # * minor fix to rxvt+pcfkeys -TD
26536 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
26539 # * add several screen-bce.XXX entries -TD
26542 # * modify screen-bce.XXX entries to exclude ech, since screen's color
26543 # model does not clear with color for that feature -TD
26546 # * rename atari and st52 to atari-old, st52-old, use newer entries from
26547 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
26550 # * add mlterm-256color entry -TD
26553 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
26554 # the alternate character set (patch by Nicholas Marriott)
26557 # * improve acsc for vt52 (Benjamin Sittler)
26558 # * modify nsterm entries for consistent sgr/sgr0 -TD
26559 # * modify xnuppc entries for consistent sgr/sgr0 -TD
26560 # * add invis to tek4115 sgr -TD
26563 # * reformat acsc strings to canonical format -TD
26566 # * add "XT" capability to entries for terminals that support both
26567 # xterm-style mouse- and title-controls, for "screen" which
26568 # special-cases TERM beginning with "xterm" or "rxvt" -TD
26571 # * fill in no-parameter forms of cursor-movement where a parameterized
26572 # form is available -TD
26573 # * fill in missing cursor controls where the form of the controls is
26575 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
26578 # * correct comparison used for setting 16-colors in linux-16color
26579 # entry (Novell #644831) -TD
26580 # * improve linux-16color entry, using "dim" for color-8 which makes it
26581 # gray rather than black like color-0 -TD
26584 # * make "vte" the principal entry defining "gnome", since GNOME terminal
26585 # is merely one of several terminals whose behavior is provided by this
26589 # * fix typo in rmso for tek4106 -Goran Weinholt
26592 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
26593 # * also suppress ncv in konsole-base -TD
26596 # * add U8 feature to denote entries for terminal emulators which do not
26597 # support VT100 SI/SO when processing UTF-8 encoding -TD
26598 # * add xterm-utf8 as a demo of the U8 feature -TD
26601 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
26604 # * update minix entry to minix 3.2 (Thomas Cort).
26607 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
26608 # * remove a backslash which continued comment, obscuring altos3
26609 # definition with OpenBSD toolset (Nicholas Marriott).
26612 # * add/use xterm+tmux chunk from xterm #271 -TD
26613 # * resync xterm-new entry from xterm #271 -TD
26614 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
26615 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
26616 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
26619 # * add kich1 to sun (Yuri Pankov)
26620 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
26623 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
26626 # * minor cleanup of X-terminal emulator section -TD
26627 # * add terminator entry -TD
26628 # * add simpleterm entry -TD
26631 # * add xterm+kbs fragment from xterm #272 -TD
26634 # * add pccon entries for OpenBSD console (Alexei Malinin)
26637 # * corrected old changelog comments -TD
26640 # * add putty-sco -TD
26643 # * add mach-gnu (Samuel Thibault)
26644 # * add mach-gnu-color, tweaks to mach-gnu -TD
26645 # * make sgr for sun-color agree with smso -TD
26646 # * make sgr for prism9 agree with other caps -TD
26647 # * make sgr for icl6404 agree with other caps -TD
26648 # * make sgr for ofcons agree with other caps -TD
26649 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
26650 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
26651 # * make sgr for avt-ns agree with other caps -TD
26654 # * make sgr for xterm-pcolor agree with other caps -TD
26655 # * make sgr for att5425 agree with other caps -TD
26656 # * make sgr for att630 agree with other caps -TD
26657 # * make sgr for linux entries agree with other caps -TD
26658 # * make sgr for tvi9065 agree with other caps -TD
26659 # * make sgr for ncr260vt200an agree with other caps -TD
26660 # * make sgr for ncr160vt100pp agree with other caps -TD
26661 # * make sgr for ncr260vt300an agree with other caps -TD
26662 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
26663 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
26666 # * correct order of use-clauses in st-256color -TD
26669 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
26672 # * document all of the user-defined capabilities in one place -TD
26673 # * add XT to some places to improve usefulness for other applications
26674 # than screen, which would like to pretend that xterm's title is
26675 # a status-line. -TD
26676 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
26677 # of ordering and overrides -TD
26680 # * add msgr to vt420, similar DEC vtXXX entries -TD
26681 # * add several missing vt420 capabilities from vt220 -TD
26682 # * factor out ansi+pp from several entries -TD
26683 # * change xterm+sl and xterm+sl-twm to include only the status-line
26684 # capabilities and not "use=xterm", making them more generally useful
26685 # as building-blocks -TD
26686 # * add dec+sl building block, as example -TD
26689 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
26690 # * add eslok flag to dec+sl -TD
26691 # * dec+sl applies to vt320 and up -TD
26692 # * drop wsl width from xterm+sl -TD
26693 # * reuse xterm+sl in putty and nsca-m -TD
26694 # * add ansi+tabs to vt520 -TD
26695 # * add ansi+enq to vt220-vt520 -TD
26698 # * remove p6 (bold) from opus3n1+ for consistency -TD
26699 # * remove acs stuff from env230 per clues in Ingres termcap -TD
26700 # * modify env230 sgr/sgr0 to match other capabilities -TD
26701 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
26702 # * make sgr for dku7202 agree with other caps -TD
26703 # * make sgr for ibmpc agree with other caps -TD
26704 # * make sgr for tek4107 agree with other caps -TD
26705 # * make sgr for ndr9500 agree with other caps -TD
26706 # * make sgr for sco-ansi agree with other caps -TD
26707 # * make sgr for d410 agree with other caps -TD
26708 # * make sgr for d210 agree with other caps -TD
26709 # * make sgr for d470c, d470c-7b agree with other caps -TD
26712 # * rewrite vt520 entry based on vt420 -TD
26713 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
26716 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
26717 # analysis by Martin Husemann).
26718 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
26719 # Onno van der Linden).
26720 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
26721 # * add kdch1, etc., to qvt108 -TD
26722 # * add dl1/il1 to some entries based on dl/il values -TD
26723 # * add dl to simpleterm -TD
26726 # * modify some older xterm entries to align with xterm source -TD
26727 # * separate "xterm-old" alias from "xterm-r6" -TD
26730 # * add E3 to xterm-basic and putty -TD
26733 # * add nsterm-256color, make this the default nsterm -TD
26734 # * remove bw from nsterm-bce, per testing with tack -TD
26737 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
26738 # (patch by Christian Persch).
26741 # * reviewed vte-2012, reverted most of the change since it was incorrect
26742 # based on testing with tack -TD
26743 # * un-cancel the initc in vte-256color, since this was implemented
26744 # starting with version 0.20 in 2009 -TD
26747 # * correct typo in sgr string for sun-color,
26748 # add bold for consistency with sgr,
26749 # change smso for consistency with sgr -TD
26750 # * correct typo in sgr string for terminator -TD
26751 # * add blink to the attributes masked by ncv in linux-16color (report
26752 # by Benjamin Sittler)
26755 # * change initialization for vt220, similar entries for consistency
26756 # with cursor-key strings (NetBSD #47674) -TD
26757 # * further improvements to linux-16color (Benjamin Sittler)
26760 # * move nsterm-related entries out of "obsolete" section to more
26761 # plausible "ansi consoles" -TD
26762 # * additional cleanup of table-of-contents by reordering -TD
26765 # * added note to clarify Terminal.app's non-emulation of the various
26766 # terminal types listed in the preferences dialog -TD
26769 # * use TS extension to describe xterm's title-escapes -TD
26770 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
26771 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
26772 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
26773 # (Debian #727119).
26774 # * simplify pfkey expression in ansi.sys -TD
26777 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
26780 # * updated notes for wsvt25 based on tack and vttest -TD
26781 # * add teken entry to show actual properties of FreeBSD's "xterm"
26785 # * add terminology entry -TD
26786 # * add mlterm3 entry, use that as "mlterm" -TD
26787 # * inherit mlterm-256color from mlterm -TD
26790 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
26793 # * cancel ccc in putty-256color and konsole-256color for consistency
26794 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
26795 # * add xterm+256setaf building block for various terminals which only
26796 # get the 256-color feature half-implemented -TD
26797 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
26801 # * add vt520ansi (Mike Gran)
26804 # * correct several entries which had termcap-style padding used in
26805 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
26806 # * correct syntax for padding in some entries: dg211, h19 -TD
26807 # * correct ti924-8 which had confused padding versus octal escapes -TD
26808 # * correct padding in sbi entry -TD
26811 # * update xterm-new to xterm patch #305 -TD
26812 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
26813 # (italic). This was a long-ago typo in screen 3.1.1 which was
26814 # overlooked until a few terminal emulators implemented the feature -TD
26817 # > fix regression in screen terminfo entries (reports by Christian
26818 # Ebert, Gabriele Balducci) -TD
26819 # + revert the change to screen; see notes for why this did not work -TD
26820 # + cancel sitm/ritm for entries which extend "screen", to work around
26821 # screen's hardcoded behavior for SGR 3 -TD
26824 # + modify sgr for screen.xterm-new to support dim capability -TD
26825 # + add dim capability to nsterm+7 -TD
26826 # + cancel dim capability for iterm -TD
26827 # + add dim, invis capabilities to vte-2012 -TD
26828 # + add sitm/ritm to konsole-base and mlterm3 -TD
26831 # + add xterm-1005 and xterm-1006 entries, with suggested extension
26832 # capability "xm" -TD
26835 # + update test-report for mrxvt -TD
26838 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
26841 # + reviewed terminology 0.6.1, add function key definitions. None of
26842 # the vt100-compatibility issues were improved -TD
26845 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
26846 # + add several key definitions to nsterm-bce to match preconfigured
26847 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
26850 # + remove unnecessary ';' from E3 capabilities -TD
26851 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
26852 # + split-out recent change to nsterm-bce as nsterm-build326, and add
26853 # nsterm-build342 to reflect changes with successive releases of OSX
26854 # (discussion with Leonardo B Schenkel)
26855 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
26859 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
26860 # + add several screen.XXX entries to support the respective variations
26861 # for 256 colors -TD
26864 # + add putty+fnkeys* building-block entries -TD
26867 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
26868 # + add vte-2014, update vte to use that -TD
26871 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
26872 # from xterm-new (report by Richard Birkett) -TD
26875 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
26876 # + fixes for st 0.5 from testing with tack -TD
26879 # + updated minitel entries to fix kel problem with emacs, and add
26880 # minitel1b-nb (Alexandre Montaron).
26881 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
26882 # + replace some dead URLs in commands with equivalents from the
26883 # Internet Archive -TD
26886 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
26887 # + add keys f12-f124 to pccon+keys (Tati Chevron).
26890 # + fix some inconsistencies in the pccon* entries -TD
26893 # + add viewdata (Alexandre Montaron).
26896 # + tidy up comments about hardcoded 256color palette (report by
26897 # Leonardo Brondani Schenkel) -TD
26898 # + add putty-noapp entry, and amend putty entry to use application mode
26899 # for better consistency with xterm (report by Leonardo Brondani
26903 # + add 'oc' capability to xterm+256color, allowing palette reset for
26907 # + modify linux2.6 entry to improve line-drawing -TD
26908 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
26911 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
26912 # reset palette using "oc" string as in linux -TD
26915 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
26916 # that could be returned -TD
26917 # + added a few capabilities fixed in recent vte -TD
26920 # + correct a typo in interix -TD
26923 # + updated minitel entries to use status line with screen(1), as well as
26924 # printing special G2 videotex chars like french accentuated glyph
26925 # using special cap XC= (patch by Alexandre Montaron).
26928 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
26929 # + correct rs2 string for vt100-nam -TD
26932 # + modify linux-16color to not mask dim, standout or reverse with the
26933 # ncv capability -TD
26934 # + add 0.1sec mandatory delay to flash capabilities using the VT100
26935 # reverse-video control -TD
26936 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
26937 # entry, to avoid conflict with the user-defined mapping. The reset
26938 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
26941 # + merge current st description (report by Harry Gindi) -TD
26944 # + modify flash capability for linux and wyse entries to put the delay
26945 # between the reverse/normal escapes rather than after -TD
26948 # + minor comment-fixes to help automate links to bug-urls -TD
26949 # + add dvtm, dvtm-256color -TD
26950 # + add settings corresponding to xterm-keys option to tmux entry to
26951 # reflect upcoming change to make that option "on" by default
26952 # (patch by Nicholas Marriott).
26953 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
26954 # + add dumb-emacs-ansi -TD
26957 # + correct a few spelling errors in comments -TD
26961 # + add vt100+4bsd building block, use that for older terminals rather
26962 # than "vt100" which is now mostly used as a building block for
26963 # terminal emulators -TD
26964 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
26965 # (report/analysis by Robert King) -TD
26968 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
26969 # + add smso for env230, to match sgr -TD
26970 # + remove p7/protect from sgr in fbterm -TD
26971 # + drop setf/setb from fbterm; setaf/setab are enough -TD
26972 # + make xterm-pcolor sgr consistent with other capabilities -TD
26973 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
26974 # (discussion with Nicholas Marriott)
26977 # + correct missing comma-separator between string capabilities in
26978 # icl6402 and m2-nam -TD
26979 # + update formatting with ncurses 6.0.20170422 -TD
26980 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
26981 # add alias ansiterm (report by Robert King).
26984 # + reformatted using hexadecimal numbers to improve readability -TD
26987 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
26988 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
26989 # + add "rep" to xterm-new, available since 1997/01/26 -TD
26990 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
26994 # + update "iterm" entry -TD
26995 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
26998 # + update notes on user-defined capabilities -TD
27001 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
27004 # + add "op" to xterm+256setaf -TD
27005 # + reviewed terminology 1.0.0 -TD
27006 # + reviewed st 0.7 -TD
27009 # + modify old terminology entry and a few other terminal emulators to
27010 # account for xon -TD
27011 # + correct sgr string for tmux, which used screen's "standout" code
27012 # rather than the standard code (patch by Roman Kagan)
27013 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
27014 # those correspond to the non-sgr settings where they differ, but
27015 # otherwise use ECMA-48 consistently:
27016 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
27017 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
27018 # st-0.7, vi603, vwmterm -TD
27021 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
27022 # blocks from xterm #331 -TD
27023 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
27025 # + modify xterm+256color and xterm+256setaf to use correct number of
27026 # color pairs, for ncurses 6.1 -TD
27027 # + add rs1 capability to xterm-256color -TD
27028 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
27029 # match xterm #272, reflecting packager's changes -TD
27030 # + remove "boolean" Se, Ss from st-0.7 -TD
27033 # + add konsole-direct and st-direct -TD
27034 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
27035 # direct-colors are wanted -TD
27038 # + add vte-direct -TD
27039 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
27043 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
27044 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
27045 # mode does not work with those programs. konsole is debatable -TD
27046 # + add "termite" entry (report by Markus Pfeiffer) -TD
27049 # + trim "XT" from screen entry -TD
27050 # + modify iterm to use xterm+sl-twm building block -TD
27051 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
27052 # konsole's removal in 2008 -TD
27053 # + expanded the history section of konsole to explain its flawed
27054 # imitation of xterm's keyboard -TD
27055 # + use xterm+x11mouse in screen.* entries because screen does not yet
27056 # support xterm's 1006 mode -TD
27057 # + add nsterm-build400 for macOS 10.13 -TD
27058 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
27059 # + update vte to vte-2017 -TD
27060 # + add ecma+strikeout to vte-2017 -TD
27061 # + add iterm2-direct -TD
27062 # + updated teraterm, added teraterm-256color -TD
27063 # + add mlterm-direct -TD
27064 # + add descriptions for ANSI building-blocks -TD
27067 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
27068 # + fix remaining flash capabilities with trailing mandatory delays -TD
27071 # + trim some redundant capabilities from st-0.7 -TD
27072 # + trim unnecessary setf/setb from interix -TD
27075 # + trim spurious whitespace from tmux in 2018-02-24 changes;
27076 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
27077 # (report by C Anthony Risinger)
27078 # + improve iterm2 using some xterm features which it has adapted -TD
27081 # + add acsc string to vi200 (Nibby Nebbulous)
27082 # add right/down-arrow to vi200's acsc -TD
27085 # + corrected acsc for wy50 -TD
27086 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
27087 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
27090 # + fix typo in tvi955 -TD
27091 # + corrected acsc for regent60 -TD
27092 # + add alias n7900 -TD
27095 # + corrected acsc for tvi950 -TD
27096 # + remove bogus kf0 from tvi950 -TD
27097 # + added function-key definitions to agree with TeleVideo 950 manual -TD
27098 # + add bel to tvi950 -TD
27099 # + add shifted function-keys to regent60 -TD
27100 # + renumber regent40 function-keys to match manual -TD
27101 # + add cd (clr_eos) to adds200 -TD
27104 # + add OpenGL clients alacritty and kitty -TD
27105 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
27108 # + fix a typo in comments (Aaron Gyes).
27109 # + add nsterm-build309 to replace nsterm-256color, assigning the latter
27110 # as an alias of nsterm, to make mouse work with nsterm-256color -TD
27111 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD
27114 # + add nsterm-direct -TD
27115 # + use SGR 1006 mouse for konsole-base -TD
27116 # + use SGR 1006 mouse for putty -TD
27117 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
27120 # + fix typo in adds200 -TD
27123 # + add "screen5", to mention italics (report by Stefan Assmann)
27124 # + modify description of xterm+x11hilite to eliminate unused p5 -TD
27127 # + update xterm-new to xterm patch #345 -TD
27128 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
27129 # + update terminator entry -TD
27130 # + remove hard-tabs from ti703 (report by Robert Clausecker)
27131 # + add Smol/Rmol for mintty, vte-2018 -Nicholas Marriott
27134 # + add rs1 to konsole, mlterm -TD
27137 # + add mintty, mintty-direct (Thomas Wolff)
27139 # + comment-out some user-defined capabilities in mintty+common to allow
27140 # builds with existing releases 5.9-6.1 -TD
27143 # + add ms-terminal -TD
27144 # + add vscode, vscode-direct -TD
27145 # + use ecma+index in screen, st -TD
27148 # + add domterm -TD
27149 # + improve comments for recent changes, add alias xterm.js -TD
27152 # + amend the change to screen, because tmux relies upon that entry
27153 # and does not support that feature (Debian #933572) -TD
27154 # + updated ms-terminal entry & notes -TD
27155 # + updated kitty entry & notes -TD
27156 # + updated alacritty+common entry & notes -TD
27157 # + use xterm+sl-twm for consistency -TD
27160 # + correct a comment -TD
27163 # + modify linux-16color to accommodate Linux console driver change in
27164 # early 2018 (report by Dino Petrucci).
27167 # + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
27170 # + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
27171 # with old non-curses programs -TD
27172 # + reviewed st 0.8.2, updated some details -TD
27173 # + use ansi+rep several places -TD
27176 # + update alacritty entries for 0.4.0 (prompted by patch by
27177 # Christian Duerr) -TD
27180 # + spelling fixes per codespell -TD
27181 # + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD
27184 # + improve vt50h and vt52 based on DECScope manual -TD
27185 # + add/use vt52+keypad and vt52-basic -TD
27188 # + use vt52+keypad in xterm-vt52, from xterm #354 -TD
27191 # + use vt100+fnkeys in putty -TD
27194 # + add details on the change to Linux SGR 21 in 2018 -TD
27195 # + add xterm-direct16 and xterm-direct256 -TD
27198 # + fix some dead URLs -TD
27201 # + update notes on vscode / xterm.js -TD
27204 # + re-enable "bel" in konsole-base (report by Nia Huang)
27205 # + add linux-s entry (patch by Alexandre Montaron).
27208 # + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage
27209 # in xterm+256color, xterm+88color -TD
27210 # + add shifted Linux console keys in linux+sfkeys entry for
27211 # screen.linux (report by Alexandre Montaron).
27212 # + use vt100+enq in screen (report by Alexandre Montaron).
27213 # + add screen.linux-s alias (suggested by Alexandre Montaron).
27216 # + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo
27220 # + correct icl6404 csr (report by Florian Weimer).
27221 # + correct ti916 cup (report by Florian Weimer).
27222 # + improve ndr9500 (report by Florian Weimer).
27225 # + correct description of vt330/vt340 (Ross Combs).
27228 # + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch).
27231 # + add tmux-direct (tmux #2370)
27232 # + simplify mlterm initialization with DECSTR -TD
27233 # + change tmux's kbs to ^? (report by Premysl Eric Janouch)
27236 # + correct sgr in aaa+rv (report by Florian Weimer) -TD
27237 # + fix some sgr inconsistencies in d230c, ibm6153, ibm6154,
27241 # + expanded notes about tek4107 -TD
27244 # + update kitty+common -TD
27245 # + add putty+screen and putty-screen (suggested by Alexandre Montaron).
27248 # + add Smulx to alacritty (Christian Duerr).
27249 # + add rep to PuTTY -TD
27250 # + add putty+keypad -TD
27253 # + correct mlterm3 kf1-kf4 (Debian #975322) -TD
27254 # + add flash to mlterm3 -TD
27257 # + update terminology to 1.8.1 -TD
27260 # + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS
27261 # (report by Patrick McDermott) -TD
27264 # + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD
27265 # + add vt220-base, for terminal emulators which generally have not
27266 # supported att610's blinking cursor control -TD
27267 # + use vt220+cvis in vt220, etc -TD
27268 # + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD
27269 # + use vt220+cvis in st, terminology, termite since they ignore
27270 # blinking-cursor detail in att610+cvis -TD
27273 # + add/use vt220+pcedit and vt220+vtedit -TD
27274 # + add scrt/securecrt and absolute -TD
27275 # + add nel to xterm-new, though supported since X11R5 -TD
27276 # + add/use xterm+nofkeys -TD
27277 # + move use of ecma+italics from xterm-basic to xterm+nofkeys -TD
27280 # + remove a duplicate "use" in xterm-vt220 -TD
27283 # + correct use-ordering in some xterm-direct flavors -TD
27286 # + add hterm, hterm-256color (Mike Frysinger)
27289 # + use default colors in pccon "op" -TD
27290 # + correct rmacs/smacs in aaa+dec, aaa+rv -TD
27291 # + add hpterm-color2 and hp98550-color (Martin Trusler)
27294 # + correct typo in "vip" comments (report by Nick Black), reviewed this
27295 # against Glink manual -TD
27296 # + fill in some missing pieces for pccon, to make it comparable to the
27300 # + trim "flash" from pccon+base -TD
27301 # + revert change for aaa+rv -TD
27302 # + add workaround for Windows Terminal's problems with CR/LF mapping to
27303 # ms-terminal (patch by Juergen Pfeifer).
27304 # + review/update current Windows Terminal vs ms-terminal -TD
27307 # + add extensions in xterm+tmux and ecma+strikeout to ms-terminal,
27308 # but cancel the non-working Cr and Ms capabilities -TD
27309 # + add foot and foot-direct -TD
27312 # + fix missing "%d" for setaf/setab code 8-15 in xterm+direct16 (report
27313 # by Florian Weimer) -TD
27316 # + corrected tsl capability for terminator -TD
27319 # + modify linux3.0 entry to reflect default mapping of shift-tab by
27320 # kbd 1.14 (report by Jan Engelhardt) -TD
27323 # + add testing note for xterm-{hp|sco|sun} -TD
27324 # + corrected description for ansi.sys-old -TD
27325 # + add xterm+nopcfkeys, to fill in keys for xterm-hp, xterm-sun -TD
27326 # + use hp+arrows in a few places -TD
27327 # + use hp+pfk-cr in a few places -TD
27330 # + add kbeg to xterm+keypad to accommodate termcap applications -TD
27331 # + add smglp and smgrp to vt420+lrmm, to provide useful data for the
27332 # "tabs" +m option -TD
27335 # + fill in some details for infoton -TD
27336 # + fix spelling/consistency in several descriptions -TD
27337 # + use vt420+lrmm in vt420 -TD
27340 # + trim some redundant definitions -TD
27343 # + add xterm+sl-alt, use that in foot+base (report by Jonas Grosse
27347 # + add dim, ecma+strikeout to st-0.6 -TD
27350 # + fix errata in description fields (report by Eric Lindblad) -TD
27351 # + add x10term+sl, aixterm+sl, ncr260vp+sl, ncr260vp+vt, wyse+sl -TD
27354 # + update kitty -TD
27357 # + add xterm+acs building-block -TD
27358 # + add xterm-p370, for use in older terminals -TD
27359 # + add dec+sl to xterm-new, per patch #371 -TD
27360 # + add mosh and mosh-256color -TD
27364 # + correct setal in mintty/tmux entries, add to vte-2018 (report by
27366 # + add blink to vte-2018 (report by Robert Lange)
27369 # + update teken -TD
27370 # + add teken-16color, teken-vt and teken-sc -TD
27371 # + add a few missing details for vte-2018 (report by Robert Lange) -TD
27374 # + make description-fields distinct -TD
27377 # + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and
27378 # also provide for focus in/out responses -TD
27381 # + expanded notes for teken/syscons -TD
27384 # + remove u6-u9 from teken-2018 -TD
27385 # + set "xterm-new" to "xterm-p370", add "xterm-p371" -TD
27388 # + revise kon/kon2/jfbterm to undo "linux2.6" change to
27389 # smacs/rmacs/enacs (Debian #1012800) -TD
27390 # + amended note for att610+cvis0, as per documentation for att610,
27391 # att620, att730 -TD
27394 # + correct dsl in dec+sl (report by Rajeev Pillai) -TD
27395 # + add/use ansi+cpr, decid+cpr -TD
27398 # + use NQ to flag entries where the terminal does not support query and
27400 # + use ansi+enq and decid+cpr in cases where the terminal probably
27401 # supported the u6-u9 extension -TD
27402 # + add/use apollo+vt132, xterm+alt47 -TD
27405 # + modify nsterm to use xterm+alt1049 (report by Paul Handly) -TD
27406 # + modify putty to use xterm+alt1049 -TD
27409 # + add/use bracketed+paste to help identify terminals supporting this
27410 # xterm feature (prompted by discussion with Bram Moolenaar) -TD
27413 # + correct PS vs PE names in bracketed+paste (report by Bram Moolenaar)
27417 # + add comment to bracketed+paste explaining that vim patch 9.0.1117 is
27418 # needed for use with the updated xterm descriptions (suggested by Bram
27420 # + add RV report+version (suggested by Bram Moolenaar).
27423 # + change RV to XR/xr, to avoid conflict with pre-existing usage in vim,
27424 # to use RV/rv to denote DA2 and its response (discussion with Bram
27426 # + add XF flag to xterm+focus so that termcap applications can be aware
27427 # of terminals which may support focus in/out -TD
27428 # + use xterm+focus in xterm-p370 and tmux -TD
27431 # + document XF, kxIN and kxOUT -TD
27432 # + add note on sun/wscons/cmdtool/shelltool -TD
27435 # + remove DECCOLM+DECSCLM from foot (patch by Daniel Ekloef).
27438 # + add xterm+focus to alacritty+common (patch by Christian Duerr).
27441 # + add mode 1004 to xterm+sm+1006 from xterm #380 -TD
27444 # + add xterm+focus to foot+base (patch by Daniel Ekloef).
27447 # + add linux+kbs for terminals which imitate xterm's behavior with
27451 # + mention E3 in regard to user_caps(5) -TD
27454 # + add/use putty+cursor to reflect amending of modified cursor-keys in
27456 # + add ecma+strikeout to putty -TD
27459 # + use oldxterm+sm+1006 in vte-2014 (report by Benno Schulenberg) -TD
27460 # + add ansi+apparrows -TD
27463 # + move xterm focus mode 1004 from xterm+sm+1006 into xterm+focus as
27464 # fe/fd capabilities, like vim (vim-pr #13440).
27467 # + used "infocmp -u" to help trim redundant capabilities -TD
27470 # + remove xterm+sm+1006 from tmux (Debian #1057688).
27471 # + used "infocmp -u" to help trim redundant capabilities -TD
27474 # + used "infocmp -u" to help trim redundant capabilities -TD
27477 # + add ms-vt100-16color, winconsole -TD
27478 # + add rio, rio-direct -TD
27479 # + add mostlike -TD
27480 # + add wezterm, contour -TD
27483 # + use ansi+arrows, ansi+apparrows, ansi+csr, ansi+erase, ansi+idc,
27484 # ansi+idc1, ansi+idl, ansi+idl1, ansi+inittabs to trim -TD
27487 # + restore padding for wy520* and vt320-k311 (report by Sven Joachim).
27490 # + use ansi+local, ansi+local1, ansi+pp, ansi+rca, ansi+rca2, ansi+sgr
27494 # + use ansi+sgrbold, ansi+sgrdim, ansi+sgrso, ansi+sgrul, ansi+tabs
27495 # ecma+color, ecma+sgr, vt100+4bsd, vt100+pfkeys, vt220+pcedit
27496 # xterm+256color, xterm+acs, xterm+nopcfkeys, xterm+pcf2 to trim -TD
27499 # + amend change to z39-a (report by Sven Joachim).
27500 # + use xterm+nopcfkeys, vt52-basic, dec+pp, dec+sl, vt52+arrows,
27501 # hp+pfk+cr, klone+acs, klone+color, klone+sgr, ncr160wy50+pp
27503 # + NetBSD-related fixes for x68k and wsvt52 (patch by Thomas Klausner)
27506 # + add vt100+noapp, vt100+noapp+pc, xterm+app+pc, xterm+decedit from
27510 # + modify xgterm to work around line-drawing bug -TD
27511 # + use CSI 3J in vte-2017 (report by Sven Joachim)
27513 ######## SHANTIH! SHANTIH! SHANTIH!